; --------------------------------------------------------------------------------
; @Title: LS1028A On-Chip Peripherals
; @Props: Released
; @Author: DAS, DLI, PIJ, PID, MRO, MKO, JON, NEJ, KRZ
; @Changelog: 2022-08-31 KRZ
; @Manufacturer: NXP - NXP Semiconductors
; @Doc: LS1028ARM.pdf (Rev. 0, 2019-12)
;       LS1028ASECRM.pdf (Rev. 0, 2020-08)
; @Core: Cortex-A72
; @Chip: LS1017A, LS1018A, LS1027A, LS1028A
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: perls1028a.per 15964 2023-04-13 11:46:29Z bschroefel $

; Known problems:
; MODULE           REGISTER        DESCRIPTION
; CGU_CGA          HWA1-4CSR       [30:27] HWACLKSEL: state 0110 repeated with two different descriptions
config 16. 8.
tree "Core Registers (Cortex-A72)"
AUTOINDENT.ON center tree
tree.open "AArch64"
tree "ID Registers"
rgroup.quad spr:0x30000++0x0
line.quad 0x00 "MIDR_EL1,Main ID Register"
hexmask.quad.byte 0x00 24.--31. 1. "IMPL,Implementer code"
bitfld.quad 0x00 20.--23.  "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 16.--19.  "ARCH, Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,ARMv8"
newline
hexmask.quad.word 0x00 4.--15. 1. "PART,Primary Part Number"
bitfld.quad 0x00 0.--3. "REV,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.quad spr:0x33001++0x0
line.quad 0x00 "CTR_EL0,Cache Type Register"
bitfld.quad 0x00 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.quad 0x00 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.quad 0x00 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.quad 0x00 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,Reserved,PIPT"
bitfld.quad 0x00 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
rgroup.quad spr:0x30005++0x00
line.quad 0x00 "MPIDR_EL1,Multiprocessor Affinity Register"
bitfld.quad 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,Uniprocessor"
newline
bitfld.quad 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Not implemented,Implemented"
hexmask.quad.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field"
hexmask.quad.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field"
newline
bitfld.quad 0x00 0.--1. "CPUID,CPU ID" "1,2,3,4"
rgroup.quad spr:0x30006++0x0
line.quad 0x00 "REVIDR_EL1,Revision ID Register"
rgroup.quad spr:0x30014++0x00
line.quad 0x00 "ID_MMFR0_EL1,Memory Model Feature Register 0"
bitfld.quad 0x00 28.--31. "IS,Indicates innermost shareability domain implemented" "Reserved,Implemented,?..."
bitfld.quad 0x00 24.--27. "FCSE,Fast Context Switch Memory Mappings Support" "Not supported,?..."
bitfld.quad 0x00 20.--23. "AR,Auxiliary Register Support" "Reserved,Reserved,ACTLR/AIFSR/ADFSR,?..."
newline
bitfld.quad 0x00 16.--19. "TCM,TCM and Associated DMA Support" "Not supported,?..."
bitfld.quad 0x00 12.--15. "SL,Shareability levels" "Reserved,2 levels,?..."
bitfld.quad 0x00 8.--11. "OSS,Outer Shareable Support" "Reserved,Implemented,?..."
newline
bitfld.quad 0x00 4.--7. "PMSA,Physical Memory System Architecture (PMSA) Support" "Not supported,?..."
bitfld.quad 0x00 0.--3. "VMSA,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
rgroup.quad spr:0x30015++0x00
line.quad 0x00 "ID_MMFR1_EL1,Memory Model Feature Register 1"
bitfld.quad 0x00 28.--31. "BTB,Branch Predictor" "Reserved,Reserved,Reserved,Reserved,Not required,?..."
bitfld.quad 0x00 24.--27. "L1TCO,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..."
bitfld.quad 0x00 20.--23. "L1UCMO,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..."
newline
bitfld.quad 0x00 16.--19. "L1HCMO,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.quad 0x00 12.--15. "L1UCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..."
bitfld.quad 0x00 8.--11. "L1HCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..."
newline
bitfld.quad 0x00 4.--7. "L1UCLMOMVA,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..."
bitfld.quad 0x00 0.--3. "L1HCLMOMVA,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..."
rgroup.quad spr:0x30016++0x00
line.quad 0x00 "ID_MMFR2_EL1,Memory Model Feature Register 2"
bitfld.quad 0x00 28.--31. "HAF,Hardware Access Flag Support" "Not supported,?..."
bitfld.quad 0x00 24.--27. "WFI,Wait for Interrupt Stalling Support" "Reserved,Supported,?..."
bitfld.quad 0x00 20.--23. "MBF,Memory Barrier Operations Support" "Reserved,Reserved,Supported,?..."
newline
bitfld.quad 0x00 16.--19. "UTLBMO,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 12.--15. "HTLBMO,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.quad 0x00 8.--11. "HL1CMRO,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..."
newline
bitfld.quad 0x00 4.--7. "HL1BPCRO,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.quad 0x00 0.--3. "HL1FPCRO,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..."
rgroup.quad spr:0x30017++0x00
line.quad 0x00 "ID_MMFR3_EL1,Memory Model Feature Register 3"
bitfld.quad 0x00 28.--31. "SS,Supersection support" "Supported,?..."
bitfld.quad 0x00 24.--27. "CMEMSZ,Cache memory size" "Reserved,Reserved,1TByte,?..."
bitfld.quad 0x00 20.--23. "CW,Coherent walk" "Reserved,Supported,?..."
newline
bitfld.quad 0x00 12.--15. "MB,Maintenance broadcast Support" "Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "BPM,Invalidate Branch predictor Support" "Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 4.--7. "HCMOSW,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Reserved,Supported,?..."
newline
bitfld.quad 0x00 0.--3. "HCMOMVA,Invalidate Cache MVA Support" "Reserved,Supported,?..."
rgroup.quad spr:0x30026++0x00
line.quad 0x00 "ID_MMFR4_EL1,ID_MMFR4_EL1"
bitfld.quad 0x00 4.--7. "AC2,Extension of ACTLR and HACTLR by ACTLR2 and HACTLR2" "Not implemented,Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved"
rgroup.quad spr:0x30070++0x00
line.quad 0x00 "ID_AA64MMFR0_EL1,AArch64 Memory Model Feature Register 0"
bitfld.quad 0x00 28.--31. "4KB,4KB granule supported" "Supported,?..."
bitfld.quad 0x00 24.--27. "64KB,64KB granule supported" "Supported,?..."
bitfld.quad 0x00 20.--23. "16KB,16KB granule supported" "Not supported,?..."
newline
bitfld.quad 0x00 12.--15. "SNSMEM,Secure versus Non-secure Memory distinction" "Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "BIGEND,Mixed-endian configuration support" "Reserved,Supported,?..."
bitfld.quad 0x00 4.--7. "ASIDBITS,Number of ASID bits" "Reserved,Reserved,16 bits,?..."
newline
bitfld.quad 0x00 0.--3. "PARANGE,Physical address range supported" "Reserved,Reserved,Reserved,Reserved,44 bits/16 TB,?..."
rgroup.quad spr:0x30020++0x00
line.quad 0x00 "ID_ISAR0_EL1,Instruction Set Attribute Register 0"
bitfld.quad 0x00 24.--27. "DIVI,Divide Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 20.--23. "DEBI,Debug Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 16.--19. "CI,Coprocessor Instructions Support" "Not supported,?..."
newline
bitfld.quad 0x00 12.--15. "CBI,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "BI,Bitfield Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 4.--7. "BCI,Bit Counting Instructions Support" "Reserved,Supported,?..."
newline
bitfld.quad 0x00 0.--3. "SI,Swap Instructions Support" "Not supported,?..."
rgroup.quad spr:0x30021++0x00
line.quad 0x00 "ID_ISAR1_EL1,Instruction Set Attribute Register 1"
bitfld.quad 0x00 28.--31. "JI,Jazelle Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 24.--27. "INTI,Interwork Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 20.--23. "IMMI,Immediate Instructions Support" "Reserved,Supported,?..."
newline
bitfld.quad 0x00 16.--19. "ITEI,If Then Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 12.--15. "EXTI,Extend Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "EARI,Exception A and R Instructions Support" "Reserved,Supported,?..."
newline
bitfld.quad 0x00 4.--7. "EXIN,Exception in ARM Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 0.--3. "ENDI,Endian Instructions Support" "Reserved,Supported,?..."
rgroup.quad spr:0x30022++0x00
line.quad 0x00 "ID_ISAR2_EL1,Instruction Set Attribute Register 2"
bitfld.quad 0x00 28.--31. "RI,Reversal Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 24.--27. "PSRI,PSR Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 20.--23. "UMI,Advanced Unsigned Multiply Instructions Support" "Reserved,Reserved,Supported,?..."
newline
bitfld.quad 0x00 16.--19. "SMI,Advanced Signed Multiply Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 12.--15. "MI,Multiply Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "II,Multi-Access Interruptible Instructions Support" "Not supported,?..."
newline
bitfld.quad 0x00 4.--7. "MHI,Memory Hint Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 0.--3. "LSI,Load and Store Instructions Support" "Reserved,Reserved,Supported,?..."
rgroup.quad spr:0x30023++0x00
line.quad 0x00 "ID_ISAR3_EL1,Instruction Set Attribute Register 3"
bitfld.quad 0x00 28.--31. "TEEEI,Thumb-EE Extensions Support" "Not supported,?..."
bitfld.quad 0x00 24.--27. "NOPI,True NOP Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 20.--23. "TCI,Thumb Copy Instructions Support" "Reserved,Supported,?..."
newline
bitfld.quad 0x00 16.--19. "TBI,Table Branch Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 12.--15. "SPI,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "SVCI,SVC Instructions Support" "Reserved,Supported,?..."
newline
bitfld.quad 0x00 4.--7. "SIMDI,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 0.--3. "SI,Saturate Instructions Support" "Reserved,Supported,?..."
rgroup.quad spr:0x30024++0x00
line.quad 0x00 "ID_ISAR4_EL1,Instruction Set Attribute Register 4"
bitfld.quad 0x00 28.--31. "SWP_FRAC,Memory System Locking Support" "Not supported,?..."
bitfld.quad 0x00 24.--27. "PSR_M_I,PSR_M Instructions Support" "Not supported,?..."
bitfld.quad 0x00 20.--23. "SPRI,Synchronization Primitive instructions" "Supported,?..."
newline
bitfld.quad 0x00 16.--19. "BI,Barrier Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 12.--15. "SMCI,SMC Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "WBI,Write-Back Instructions Support" "Reserved,Supported,?..."
newline
bitfld.quad 0x00 4.--7. "WSI,With-Shift Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 0.--3. "UI,Unprivileged Instructions Support" "Reserved,Reserved,Supported,?..."
rgroup.quad spr:0x30025++0x00
line.quad 0x00 "ID_ISAR5_EL1,Instruction Set Attribute Register 5"
bitfld.quad 0x00 16.--19. "CRC32,CRC32 Instructions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 12.--15. "SHA2,SHA2 Instructions Support" "Not supported,Supported,?..."
bitfld.quad 0x00 8.--11. "SHA1,SHA1 Instructions Support" "Not supported,Supported,?..."
newline
bitfld.quad 0x00 4.--7. "AES,AES Instructions Support" "Not supported,Reserved,Supported,?..."
bitfld.quad 0x00 0.--3. "SEVL,SEVL Instructions Support" "Reserved,Supported,?..."
rgroup.quad spr:0x30060++0x00
line.quad 0x00 "ID_AA64ISAR0_EL1,AArch64 Instruction Set Attribute Register 0"
bitfld.quad 0x00 16.--19. "CRC32,CRC32" "Reserved,Implemented,?..."
bitfld.quad 0x00 12.--15. "SHA2, SHA2 instructions are implemented" "Not implemented,Implemented,?..."
bitfld.quad 0x00 8.--11. "SHA1, SHA1 instructions are implemented" "Not implemented,Implemented,?..."
newline
bitfld.quad 0x00 4.--7. "AES,AES instructions are implemented" "Not implemented,Reserved,Implemented,?..."
rgroup.quad spr:0x30010++0x00
line.quad 0x00 "ID_PFR0_EL1,Processor Feature Register 0"
bitfld.quad 0x00 12.--15. "STATE3,Thumb Execution Environment (Thumb-EE) Support" "Not supported,?..."
bitfld.quad 0x00 8.--11. "STATE2,Support for Jazelle extension" "Reserved,Supported,?..."
bitfld.quad 0x00 4.--7. "STATE1,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,Supported,?..."
newline
bitfld.quad 0x00 0.--3. "STATE0,ARM Instruction Set Support" "Reserved,Supported,?..."
rgroup.quad spr:0x30011++0x00
line.quad 0x00 "ID_PFR1_EL1,Processor Feature Register 1"
bitfld.quad 0x00 28.--31. "GIC_CPU,GIC CPU Support" "Disabled,Enabled,?..."
newline
bitfld.quad 0x00 16.--19. "GT,Generic Timer Support" "Reserved,Supported,?..."
bitfld.quad 0x00 12.--15. "VE,Virtualization Extensions Support" "Reserved,Supported,?..."
bitfld.quad 0x00 8.--11. "MPM,Microcontroller Programmer's Model Support" "Not supported,?..."
newline
bitfld.quad 0x00 4.--7. "SE,Security Extensions Architecture v1 Support" "Reserved,Supported,?..."
bitfld.quad 0x00 0.--3. "PM,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..."
rgroup.quad spr:0x30040++0x00
line.quad 0x00 "ID_AA64PFR0_EL1,AArch64 Processor Feature Register 0"
bitfld.quad 0x00 24.--27. "GIC,Support for the GIC System register interface" "Not supported,GICv3 supported,?..."
bitfld.quad 0x00 20.--23. "ADVSIMD,Advanced SIMD" "Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented"
bitfld.quad 0x00 16.--19. "FP,Floating-point" "Implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented"
newline
bitfld.quad 0x00 12.--15. "EL3H,EL3 exception handling" "Reserved,Reserved,Implemented,?..."
bitfld.quad 0x00 8.--11. "EL2H,EL2 exception handling" "Reserved,Reserved,Implemented,?..."
bitfld.quad 0x00 4.--7. "EL1H,EL1 exception handling" "Reserved,Reserved,Implemented,?..."
newline
bitfld.quad 0x00 0.--3. "EL0H,EL0 exception handling" "Reserved,Reserved,Implemented,?..."
rgroup.quad spr:0x30012++0x00
line.quad 0x00 "ID_DFR0_EL1,Debug Feature Register 0"
bitfld.quad 0x00 24.--27. "PMM,Performance Monitor Model Support" "Reserved,Reserved,Reserved,PMUv3,?..."
bitfld.quad 0x00 20.--23. "MDM_MM,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..."
bitfld.quad 0x00 16.--19. "TM_MM,Trace Model (Memory-Mapped) Support" "Reserved,Supported,?..."
newline
bitfld.quad 0x00 12.--15. "CTM_CB,Coprocessor-Based Trace Debug Model Support" "Not supported,?..."
bitfld.quad 0x00 8.--11. "CDM_MM,Memory-Mapped Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.quad 0x00 4.--7. "SDM_CB,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
newline
bitfld.quad 0x00 0.--3. "CDM_CB,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
rgroup.quad spr:0x30050++0x00
line.quad 0x00 "ID_AA64DFR0_EL1,AArch64 Debug Feature Register 0"
bitfld.quad 0x00 28.--31. "CTX_CMPS,Number of breakpoints that are context-aware minus 1" "Reserved,2,?..."
bitfld.quad 0x00 20.--23. "WRPS,The number of watchpoints minus 1" "Reserved,Reserved,Reserved,4,?..."
bitfld.quad 0x00 12.--15. "BRPS,The number of breakpoints minus 1" "Reserved,Reserved,Reserved,Reserved,Reserved,6,?..."
newline
bitfld.quad 0x00 8.--11. "PMUVER,Performance Monitors extension version" "Reserved,PMUv3,?..."
bitfld.quad 0x00 4.--7. "TRACEVER,Trace extension" "Not implemented,?..."
bitfld.quad 0x00 0.--3. "DEBUGGER,Debug architecture version" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Debug v8-A,?..."
rgroup.quad spr:0x339C6++0x0
line.quad 0x00 "PMCEID0_EL0,Common Event Identification Register 0"
bitfld.quad 0x00 30. "CH,Chain" "Not implemented,Implemented"
bitfld.quad 0x00 29. "BC,Bus cycle" "Not implemented,Implemented"
bitfld.quad 0x00 28. "TW,Instruction architecturally executed condition check pass" "Not implemented,Implemented"
newline
bitfld.quad 0x00 27. "IS,Instruction speculatively executed" "Not implemented,Implemented"
bitfld.quad 0x00 26. "ME,Local memory error" "Not implemented,Implemented"
bitfld.quad 0x00 25. "DA,Bus access" "Not implemented,Implemented"
newline
bitfld.quad 0x00 24. "DC2W,Level 2 data cache write-back" "Not implemented,Implemented"
bitfld.quad 0x00 23. "DC2R,Level 2 data cache refill" "Not implemented,Implemented"
bitfld.quad 0x00 22. "DC2A,Level 2 data cache access" "Not implemented,Implemented"
newline
bitfld.quad 0x00 21. "DC1W,Level 1 data cache write-back" "Not implemented,Implemented"
bitfld.quad 0x00 20. "IC1A,Level 1 instruction cache access" "Not implemented,Implemented"
bitfld.quad 0x00 19. "MA,Data memory access" "Not implemented,Implemented"
newline
bitfld.quad 0x00 18. "BP,Predictable branch speculatively executed" "Not implemented,Implemented"
bitfld.quad 0x00 17. "CC,Cycle" "Not implemented,Implemented"
bitfld.quad 0x00 16. "BM,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented"
newline
bitfld.quad 0x00 15. "UL,Instruction architecturally executed condition check pass  unaligned load or store" "Not implemented,Implemented"
bitfld.quad 0x00 14. "BR,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented"
bitfld.quad 0x00 13. "BI,Instruction architecturally executed  immediate branch" "Not implemented,Implemented"
newline
bitfld.quad 0x00 12. "PW,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented"
bitfld.quad 0x00 11. "CW,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented"
bitfld.quad 0x00 10. "ER,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented"
newline
bitfld.quad 0x00 9. "ET,Exception taken" "Not implemented,Implemented"
bitfld.quad 0x00 8. "IA,Instruction architecturally executed" "Not implemented,Implemented"
bitfld.quad 0x00 7. "ST,Instruction architecturally executed condition check pass store" "Not implemented,Implemented"
newline
bitfld.quad 0x00 6. "LD,Instruction architecturally executed condition check pass load" "Not implemented,Implemented"
bitfld.quad 0x00 5. "DT1R,Level 1 data TLB refill" "Not implemented,Implemented"
bitfld.quad 0x00 4. "DC1A,Level 1 data cache access" "Not implemented,Implemented"
newline
bitfld.quad 0x00 3. "DC1R,Level 1 data cache refill" "Not implemented,Implemented"
bitfld.quad 0x00 2. "IT1R,Level 1 instruction TLB refill" "Not implemented,Implemented"
bitfld.quad 0x00 1. "IC1R,Level 1 instruction cache refill" "Not implemented,Implemented"
newline
bitfld.quad 0x00 0. "SI,Instruction architecturally executed condition check pass software increment" "Not implemented,Implemented"
rgroup.quad spr:0x33007++0x00
line.quad 0x00 "DCZID_EL0,Data Cache Zero ID"
bitfld.quad 0x00 4. "DZP,Prohibit the DC ZVA instruction" "Not prohibited,Prohibited"
bitfld.quad 0x00 0.--3. "BS,Block Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
group.quad spr:0x33D02++0x00
line.quad 0x00 "TPIDR_EL0,Thread Pointer/ID Register"
group.quad spr:0x30D04++0x00
line.quad 0x00 "TPIDR_EL1,Thread Pointer/ID Register"
group.quad spr:0x34D02++0x00
line.quad 0x00 "TPIDR_EL2,Thread Pointer/ID Register"
group.quad spr:0x36D02++0x00
line.quad 0x00 "TPIDR_EL3,Thread Pointer/ID Register"
group.quad spr:0x33D03++0x00
line.quad 0x00 "TPIDRRO_EL0,Thread Pointer/ID Register"
tree.end
tree "System Control and Configuration"
group.quad spr:0x36111++0x00
line.quad 0x00 "SDER32_EL3,Secure Debug Enable Register"
bitfld.quad 0x00 1. "SUNIDEN,Enable non-invasive debug features in Secure User mode" "Disabled,Enabled"
bitfld.quad 0x00 0. "SUIDEN,Enable debug exceptions in Secure User mode" "Disabled,Enabled"
group.quad spr:0x30100++0x0
line.quad 0x00 "SCTLR_EL1,Control Register (EL1)"
bitfld.quad 0x00 26. "UCI,EL0 access enable (DC CVAU|DC CIVAC|DC CVAC|IC IVAU)" "Disabled,Enabled"
bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.quad 0x00 24. "E0E,Endianness of explicit data access at EL0" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.quad 0x00 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.quad 0x00 15. "UCT,EL0 access enable (CTR_EL0)" "Disabled,Enabled"
bitfld.quad 0x00 14. "DZE,EL0 access enable (DC ZVA)" "Disabled,Enabled"
newline
bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.quad 0x00 9. "UMA,User Mask Access" "Disabled,Enabled"
newline
bitfld.quad 0x00 8. "SED,SETEND Disable" "No,Yes"
bitfld.quad 0x00 7. "ITD,IT instruction disable" "No,Yes"
newline
bitfld.quad 0x00 6. "THEE,Thumb EE enable" "Disabled,Enabled"
bitfld.quad 0x00 5. "CP15BEN,CP15 barrier enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "SA0,EL0 stack alignment check enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x34100++0x0
line.quad 0x00 "SCTLR_EL2,Control Register (EL2)"
bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 12. "I,Instruction cache enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x36100++0x0
line.quad 0x00 "SCTLR_EL3,Control Register (EL3)"
bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 12. "I,Instruction cache enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x31F20++0x00
line.quad 0x00 "CPUACTLR_EL1,CPU Auxiliary Control Register"
bitfld.quad 0x00 63. "FPMRCGEA,Force processor RCG enables active" "Not forced,Forced"
bitfld.quad 0x00 62. "FPNMRCGEA,Force processor non-memory-system RCG enables active" "Not forced,Forced"
newline
bitfld.quad 0x00 61. "FPDIERCGEA,Force processor Decode and Integer Execute idle RCG enables active" "Not forced,Forced"
bitfld.quad 0x00 60. "FPDRCGEA,Force processor Dispatch idle RCG enables active" "Not forced,Forced"
newline
bitfld.quad 0x00 59. "DLPDMB,Disable load pass DMB" "No,Yes"
bitfld.quad 0x00 58. "DDMBN,Disable DMB nullification" "No,Yes"
newline
bitfld.quad 0x00 57. "TA,Treat DMB st/st and DMB ld/allas DMB all/all" "Disabled,Enabled"
bitfld.quad 0x00 56. "DL1DCHP,Disable L1 Data Cache hardware prefetcher" "No,Yes"
newline
bitfld.quad 0x00 55. "DLPS,Disable load pass store" "No,Yes"
bitfld.quad 0x00 54. "TGRE,Treat GRE/nGRE as nGnRE" "Disabled,Enabled"
newline
bitfld.quad 0x00 53. "TDMBADSB,Treat DMBand DSBas if their domain field is SY" "Disabled,Enabled"
bitfld.quad 0x00 52. "DORFLDNPI,Disable over-read from LDNP instruction" "No,Yes"
newline
bitfld.quad 0x00 51. "ECDAFEMP,Enable contention detection and fast exclusive monitor path" "Disabled,Enabled"
bitfld.quad 0x00 50. "DSSONNCGREEMT,Disable store streaming on NC/GRE memory type" "No,Yes"
newline
bitfld.quad 0x00 49. "DNHOWBNAMT,Disable non-allocate hint of Write-Back No-Allocate (WBNA) memory type" "No,Yes"
bitfld.quad 0x00 48. "DESRAFLSTL2,Disable early speculative read access from LS to L2" "No,Yes"
newline
bitfld.quad 0x00 47. "DL1L2HP,Disable L1/L2 hardware prefetch across 4KB page boundary even if page is 64KB or larger" "No,Yes"
bitfld.quad 0x00 46. "DML1DTLBM,Disable multiple outstanding L1 Data TLB misses and L2 TLB hit under miss" "No,Yes"
newline
bitfld.quad 0x00 45. "Dl1DCWT,Disable L1-DCache way tracker" "No,Yes"
bitfld.quad 0x00 44. "EDCCADCCI,Enable data cache clean as data cache clean/invalidate" "Disabled,Enabled"
newline
bitfld.quad 0x00 43. "DVABHWPREF,Disable the Load/Store hardware prefetcher from using VA to cross page boundaries" "No,Yes"
bitfld.quad 0x00 42. "DPREFREQRUT,Disable prefetch requests from ReadUnique transactions" "No,Yes"
newline
bitfld.quad 0x00 41. "ESHWSHAEP,Enables snoop hazard while waiting for second half of atomic exclusive pair" "Disabled,Enabled"
bitfld.quad 0x00 39. "DIM,Disable instruction merging" "No,Yes"
newline
bitfld.quad 0x00 38. "FFPSCRWF,Force FPSCR write flush" "Not forced,Forced"
bitfld.quad 0x00 37. "DIGS,Disable instruction group split" "No,Yes"
newline
bitfld.quad 0x00 36. "FIDSBONASBE,Force implicit DSB on an ISB event" "Not forced,Forced"
bitfld.quad 0x00 34. "DSBP,Disable Static Branch Predictor" "No,Yes"
newline
bitfld.quad 0x00 33. "DL1ICWPIMBTB,Disable L1 Instruction Cache way prediction in micro-BTB" "No,Yes"
bitfld.quad 0x00 32. "DL1ICP,Disable L1 Instruction Cache prefetch" "No,Yes"
newline
bitfld.quad 0x00 31. "SDEH,Snoop-delayed exclusive handling" "Disabled,Enabled"
bitfld.quad 0x00 30. "FMCEA,Force main clock enable active" "Not forced,Forced"
newline
bitfld.quad 0x00 29. "FASIMDFPCEA,Force Advanced SIMD and floating-point clock enable active" "Disabled,Enabled"
bitfld.quad 0x00 27.--28. "WSNAT,Write streaming no-allocate threshold" "12th,128th,512th,Disabled"
newline
bitfld.quad 0x00 25.--26. "WSNL1AT,Write streaming no-L1-allocate threshold" "4th,64th,128th,Disabled"
bitfld.quad 0x00 24. "NCSE,Non-cacheable streaming enhancement" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. "FIORTTSSAW,Force in-order requests to the same set and way" "Not forced,Forced"
bitfld.quad 0x00 22. "FIOLI,Force in-order load issue" "Not forced,Forced"
newline
bitfld.quad 0x00 21. "DL2TLBP,Disable L2 TLB prefetching" "No,Yes"
bitfld.quad 0x00 20. "DL2TTWIPAPAC,Disable L2 translation table walk IPA PA cache" "No,Yes"
newline
bitfld.quad 0x00 19. "DL2S1TTWC,Disable L2 stage 1 translation table walk cache" "No,Yes"
bitfld.quad 0x00 18. "DL2S1TTWL2PAC,Disable L2 stage 1 translation table walk L2 PA cache" "No,Yes"
newline
bitfld.quad 0x00 17. "DL2TLBPO,Disable L2 TLB performance optimization" "No,Yes"
bitfld.quad 0x00 16. "EFSOADLR,Enable full Strongly-ordered and Device load replay" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. "FIOIIBEU,Force in-order issue in branch execute unit" "Not forced,Forced"
bitfld.quad 0x00 14. "FLOFOIGCDAPC,Force limit of one instruction group commit/de-allocate per cycle" "Not forced,Forced"
newline
bitfld.quad 0x00 13. "FASPRW,Flush after Special Purpose Register (SPR) writes" "Disabled,Enabled"
bitfld.quad 0x00 12. "FPOSPRS,Force push of SPRs" "Disabled,Enabled"
newline
bitfld.quad 0x00 11. "LTOIPIG,Limit to one instruction per instruction group" "Disabled,Enabled"
bitfld.quad 0x00 10. "FSAEIG,Force serialization after each instruction group" "Not forced,Forced"
newline
bitfld.quad 0x00 9. "DFRO,Disable flag renaming optimization" "No,Yes"
bitfld.quad 0x00 8. "EWFIIAANOPI,Execute WFI instruction as a NOP instruction" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. "EWFEIAANOPI,Execute WFE instruction as a NOP instruction" "Disabled,Enabled"
bitfld.quad 0x00 5. "EPLDPLDWIASNOP,Execute PLDand PLDWinstructions as a NOP" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "DIP,Disable indirect predictor" "No,Yes"
bitfld.quad 0x00 3. "DMBTB,Disable micro-BTB" "No,Yes"
newline
bitfld.quad 0x00 1. "DICMS,Disable Instruction Cache miss streaming" "No,Yes"
bitfld.quad 0x00 0. "EIOBTB,Enable invalidates of BTB" "Disabled,Enabled"
group.quad spr:0x31F21++0x00
line.quad 0x00 "CPUECTLR_EL1,CPU Extended Control Register"
bitfld.quad 0x00 38. "DTWDAP,Disable table walk descriptor access prefetch" "No,Yes"
bitfld.quad 0x00 35.--36. "L2IFPD,L2 instruction fetch prefetch distance" "0 requests,1 request,2 requests,3 requests"
newline
bitfld.quad 0x00 32.--33. "L2LSDPD,L2 load/store data prefetch distance" "16 requests,18 requests,20 requests,22 requests"
bitfld.quad 0x00 6. "SMPEN,Enables the processor to receive instruction cache and TLB maintenance operations broadcast from other processors in the cluster" "Disabled,Enabled"
newline
bitfld.quad 0x00 0.--2. "CPURETCTL,CPU retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.quad spr:0x31F22++0x00
line.quad 0x00 "CPUMERRSR_EL1,CPU Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
newline
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
newline
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--22. "B/W,Bank/Way" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
hexmask.quad.tbyte 0x00 0.--17. 1. "INDEX,Indicates the index address of the first memory error"
group.quad spr:0x34101++0x0
line.quad 0x00 "ACTLR_EL2,Auxiliary Control Register"
bitfld.quad 0x00 6. "L2ACTLRAC,L2ACTLR write access control" "Disabled,Enabled"
bitfld.quad 0x00 5. "L2ECTLRAC,L2ECTLR write access control" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "L2CTLRAC,L2CTLR write access control" "Disabled,Enabled"
bitfld.quad 0x00 1. "CPUECTLRAC,CPUECTLR write access control" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "CPUACTLRAC,CPUACTLR write access control" "Disabled,Enabled"
group.quad spr:0x36101++0x0
line.quad 0x00 "ACTLR_EL3,Auxiliary Control Register"
bitfld.quad 0x00 6. "L2ACTLRAC,L2ACTLR write access control" "Disabled,Enabled"
bitfld.quad 0x00 5. "L2ECTLRAC,L2ECTLR write access control" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "L2CTLRAC,L2CTLR write access control" "Disabled,Enabled"
bitfld.quad 0x00 1. "CPUECTLRAC,CPUECTLR write access control" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "CPUACTLRAC,CPUACTLR write access control" "Disabled,Enabled"
group.quad spr:0x30102++0x00
line.quad 0x00 "CPACR_EL1,Architectural Feature Access Control Register"
bitfld.quad 0x00 20.--21. "FPEN,Traps instructions that access registers associated with Advanced SIMD and Floating-point execution to trap to EL1 when executed from EL0 or EL1" "Trap EL0/EL1,Trap EL0,Trap EL0/EL1,No trap"
group.quad spr:0x36110++0x0
line.quad 0x00 "SCR_EL3,Secure Configuration Register"
bitfld.quad 0x00 13. "TWE,Trap WFE Instructions" "Not trapped,Trapped"
bitfld.quad 0x00 12. "TWI,Trap WFI Instructions" "Not trapped,Trapped"
newline
bitfld.quad 0x00 11. "ST,Enable secure EL1 access" "Disabled,Enabled"
bitfld.quad 0x00 10. "RW,Register width control for lower exception levels" "AArch32,AArch64"
newline
bitfld.quad 0x00 9. "SIF,Secure Instruction Fetch" "Permitted,Not permitted"
bitfld.quad 0x00 8. "HCE,Hypervisor Call enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. "SMD,Secure Monitor Call disable" "No,Yes"
bitfld.quad 0x00 3. "EA,External Abort and SError Interrupt Routing" "Not to EL3,To EL3"
newline
bitfld.quad 0x00 2. "FIQ,Physical FIQ Routing" "Not to EL3,To EL3"
bitfld.quad 0x00 1. "IRQ,Physical IRQ Routing" "Not to EL3,To EL3"
newline
bitfld.quad 0x00 0. "NS,Secure mode " "Secure,Non-secure"
group.quad spr:0x34110++0x00
line.quad 0x00 "HCR_EL2,Hypervisor Configuration Register"
bitfld.quad 0x00 33. "ID,Stage 2 Instruction cache disable" "No,Yes"
bitfld.quad 0x00 32. "CD,Stage 2 Data cache disable" "No,Yes"
newline
bitfld.quad 0x00 31. "RW,Register width control for lower exception levels" "AArch32,EL1 is 64-bit"
bitfld.quad 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled"
newline
bitfld.quad 0x00 29. "HCD,Hypervisor Call Disable" "No,Yes"
bitfld.quad 0x00 28. "TDZ,Trap DC ZVA instruction" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. "TGE,Trap General Exceptions has an enhanced role when EL2 is using AArch64" "Disabled,Enabled"
bitfld.quad 0x00 26. "TVM,Trap Virtual Memory controls to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 25. "TTLB,Trap TLB maintenance instructions to EL2" "Disabled,Enabled"
bitfld.quad 0x00 24. "TPU,Trap Cache maintenance instructions to Point of Unificiation to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. "TPC,Trap Data/Unified Cache maintenance instructions to Point of Coherency tp EL2" "Disabled,Enabled"
bitfld.quad 0x00 22. "TSW,Trap Data/Unified Cache maintenance instructions by Set/Way to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 21. "TACR,Trap Auxiliary Control Register" "Disabled,Enabled"
bitfld.quad 0x00 20. "TIDCP,Trap Implementation Dependent functionality" "Disabled,Enabled"
newline
bitfld.quad 0x00 19. "TSC,Trap SMC" "Disabled,Enabled"
bitfld.quad 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled"
newline
bitfld.quad 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled"
bitfld.quad 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled"
bitfld.quad 0x00 14. "TWE,Trap WFE" "Disabled,Enabled"
newline
bitfld.quad 0x00 13. "TWI,Trap WFI" "Disabled,Enabled"
bitfld.quad 0x00 12. "DC,Default Cacheable" "Disabled,Enabled"
newline
bitfld.quad 0x00 10.--11. "BSU,Barrier Shareability upgrade. determines the minimum shareability domain that is applied to any barrier executed from EL1 or EL0" "No effect,Inner Shareable,Outer Shareable,Full System"
bitfld.quad 0x00 9. "FB,Force broadcast" "Not forced,Forced"
newline
bitfld.quad 0x00 8. "VSE,Virtual System Error/Asynchronous Abort:" "No pending,Pending"
bitfld.quad 0x00 7. "VI,Virtual IRQ Interrupt" "Not pending,Pending"
newline
bitfld.quad 0x00 6. "VF,Virtual FIQ Interrupt" "Not pending,Pending"
bitfld.quad 0x00 5. "AMO,Asynchronous abort and error interrupt routing" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "IMO,Physical IRQ Routing" "Disabled,Enabled"
bitfld.quad 0x00 3. "FMO,Physical FIQ Routing" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled"
bitfld.quad 0x00 1. "SWIO,Set/Way Invalidation Override" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "VM,Second stage of Translation enable" "Disabled,Enabled"
group.quad spr:0x30510++0x00
line.quad 0x00 "AFSR0_EL1,Auxiliary Fault Status Registers 0 (EL1)"
group.quad spr:0x30511++0x00
line.quad 0x00 "AFSR1_EL1,Auxiliary Fault Status Registers 1 (EL1)"
group.quad spr:0x34510++0x00
line.quad 0x00 "AFSR0_EL2,Auxiliary Fault Status Registers 0 (EL2)"
group.quad spr:0x34511++0x00
line.quad 0x00 "AFSR1_EL2,Auxiliary Fault Status Registers 1 (EL2)"
group.quad spr:0x36510++0x00
line.quad 0x00 "AFSR0_EL3,Auxiliary Fault Status Registers 0 (EL3)"
group.quad spr:0x36511++0x00
line.quad 0x00 "AFSR1_EL3,Auxiliary Fault Status Registers 1 (EL3)"
tree.open "Exception Syndrome Registers"
if (((per.q(spr:0x30520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((per.q(spr:0x30520))&0xFC000000)==0x04000000)
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((per.q(spr:0x30520))&0xFC000000)==(0x0C000000||0x14000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x30520))&0xFC000000)==(0x10000000||0x30000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x30520))&0xFC000000)==0x18000000)
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction"
bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x30520))&0xFC000000)==0x1C000000)
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((per.q(spr:0x30520))&0xFC000000)==(0x44000000||0x54000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((per.q(spr:0x30520))&0xFC000000)==0x60000000)
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3"
newline
bitfld.quad 0x00 17.--19. "OP2,Op2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 14.--16. "OP1,Op1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x30520))&0xFC000000)==(0x80000000||0x84000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/TTBR[0/1],Reserved,Reserved,Reserved,Reserved,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort,Reserved,Reserved,Reserved,Reserved,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity,Reserved,Reserved,Reserved,Reserved,Sync. parity/1st level,Sync. parity/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Debug,?..."
elif (((per.q(spr:0x30520))&0xFD000000)==(0x91000000||0x95000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.quad 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((per.q(spr:0x30520))&0xFD000000)==(0x90000000||0x94000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.quad 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((per.q(spr:0x30520))&0xFC800000)==(0xA0800000||0xB0800000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((per.q(spr:0x30520))&0xFC800000)==(0xA0000000||0xB0000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((per.q(spr:0x30520))&0xFD000000)==0xBD000000)
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.quad 0x00 15. "UNASE,Unattributable System Error" "Attributable,Unattributable"
newline
bitfld.quad 0x00 14. "UNCSE,Uncontainable System Error" "Containable,Uncontainable"
bitfld.quad 0x00 0.--1. "SES,System Error Source" "Decode,ECC,Slave,"
elif (((per.q(spr:0x30520))&0xFD000000)==0xBC000000)
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((per.q(spr:0x30520))&0xFC000000)==(0xC0000000||0xC4000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((per.q(spr:0x30520))&0xFC000000)==(0xC8000000||0xCC000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,EX bit valid" "Not valid,Valid"
bitfld.quad 0x00 6. "EX,Exclusive operation" "No,Yes"
newline
bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((per.q(spr:0x30520))&0xFC000000)==(0xD0000000||0xD4000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write"
newline
bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((per.q(spr:0x30520))&0xFC000000)==(0xE0000000||0xF0000000))
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value"
else
group.quad spr:0x30520++0x00
line.quad 0x00 "ESR_EL1,Exception Syndrome Register (EL1)"
bitfld.quad 0x00 26.--31. "EC,Exception class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
if (((per.q(spr:0x34520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000||0x4C000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((per.q(spr:0x34520))&0xFC000000)==0x04000000)
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((per.q(spr:0x34520))&0xFC000000)==(0x0C000000||0x14000000||0x20000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x34520))&0xFC000000)==(0x10000000||0x30000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x34520))&0xFC000000)==0x18000000)
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction"
bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x34520))&0xFC000000)==0x1C000000)
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((per.q(spr:0x34520))&0xFC000000)==(0x44000000||0x48000000||0x54000000||0x58000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((per.q(spr:0x34520))&0xFC000000)==0x5C000000)
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the issued SMC instruction"
elif (((per.q(spr:0x34520))&0xFC000000)==0x60000000)
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3"
newline
bitfld.quad 0x00 17.--19. "OP2,Op2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 14.--16. "OP1,Op1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x34520))&0xFC000000)==(0x80000000||0x84000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,?..."
elif (((per.q(spr:0x34520))&0xFD000000)==(0x91000000||0x95000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.quad 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((per.q(spr:0x34520))&0xFD000000)==(0x90000000||0x94000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.quad 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((per.q(spr:0x34520))&0xFC800000)==(0xA0800000||0xB0800000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((per.q(spr:0x34520))&0xFC800000)==(0xA0000000||0xB0000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((per.q(spr:0x34520))&0xFD000000)==0xBD000000)
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
hexmask.quad.tbyte 0x00 0.--23. 1. "IS,Additional information about the SError interrupt"
elif (((per.q(spr:0x34520))&0xFD000000)==0xBC000000)
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((per.q(spr:0x34520))&0xFC000000)==(0xC0000000||0xC4000000||0xE8000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((per.q(spr:0x34520))&0xFC000000)==(0xC8000000||0xCC000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,EX bit valid" "Not valid,Valid"
bitfld.quad 0x00 6. "EX,Exclusive operation" "No,Yes"
newline
bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((per.q(spr:0x34520))&0xFC000000)==(0xD0000000||0xD4000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write"
newline
bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((per.q(spr:0x34520))&0xFC000000)==(0xE0000000||0xF0000000))
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value"
else
group.quad spr:0x34520++0x00
line.quad 0x00 "ESR_EL2,Exception Syndrome Register (EL2)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,MCR/VMRS to CP10/AArch32,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,HVC in AArch32,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Vector Catch,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
if (((per.q(spr:0x36520))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000||0x4C000000))
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((per.q(spr:0x36520))&0xFC000000)==0x04000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.quad 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((per.q(spr:0x36520))&0xFC000000)==(0x0C000000||0x14000000))
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.quad 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x36520))&0xFC000000)==(0x10000000||0x30000000))
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.quad 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x36520))&0xFC000000)==0x18000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.quad.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction"
bitfld.quad 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.quad 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x36520))&0xFC000000)==0x1C000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((per.q(spr:0x36520))&0xFC000000)==(0x54000000||0x58000000))
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((per.q(spr:0x36520))&0xFC000000)==0x5C000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.quad.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the issued SMC instruction"
elif (((per.q(spr:0x36520))&0xFC000000)==0x60000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.quad 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3"
newline
bitfld.quad 0x00 17.--19. "OP2,Op2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 14.--16. "OP1,Op1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.q(spr:0x36520))&0xFC000000)==0x7C000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.quad.long 0x00 0.--24. 1. "IMPL_DEF,Implementation defined"
elif (((per.q(spr:0x36520))&0xFC000000)==(0x80000000||0x84000000))
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.quad 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/TTBR[0/1],Reserved,Reserved,Reserved,Reserved,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort,Reserved,Reserved,Reserved,Reserved,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity,Reserved,Reserved,Reserved,Reserved,Sync. parity/1st level,Sync. parity/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Debug,?..."
elif (((per.q(spr:0x36520))&0xFD000000)==(0x91000000||0x95000000))
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.quad 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.quad 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.quad 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.quad 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.quad 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.quad 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((per.q(spr:0x36520))&0xFD000000)==(0x90000000||0x94000000))
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.quad 0x00 9. "EA,External abort type" "Not external,External"
newline
bitfld.quad 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.quad 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.quad 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.quad 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((per.q(spr:0x36520))&0xFC800000)==0xB0800000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.quad 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.quad 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.quad 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.quad 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.quad 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.quad 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((per.q(spr:0x36520))&0xFC800000)==0xB0000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.quad 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((per.q(spr:0x36520))&0xFD000000)==0xBD000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
hexmask.quad.tbyte 0x00 0.--23. 1. "IS,Additional information about the SError interrupt"
elif (((per.q(spr:0x36520))&0xFD000000)==0xBC000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.quad 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((per.q(spr:0x36520))&0xFC000000)==0xF0000000)
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.quad 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.quad.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value"
else
group.quad spr:0x36520++0x00
line.quad 0x00 "ESR_EL3,Exception Syndrome Register (EL3)"
bitfld.quad 0x00 26.--31. "EC,Exception class"  "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,Reserved,Reserved,SMC in AArch32,Reserved,SVC in AArch64,HVC in AArch64,SMC in AArch64,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,IMPLEMENTATION DEFINED,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Reserved,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
tree.end
newline
if (((per.q(spr:0x34501))&0x200)==0x200)
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External abort type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Large physical address extension" "Short,Long"
newline
bitfld.quad 0x00 0.--5. "STATUS,Fault Status bits" "Address size/0th level,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Access flag/0th level,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Permission/0th level,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Sync. external/on TTW/0th level,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/0th level,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,?..."
else
group.quad spr:0x34501++0x00
line.quad 0x00 "IFSR32_EL2,Instruction Fault Status Register"
bitfld.quad 0x00 12. "EXT,External abort type" "DECERR,SLVERR"
bitfld.quad 0x00 9. "LPAE,Large physical address extension" "Short,Long"
newline
bitfld.quad 0x00 0.--3. 10. "FS[3:0],Fault Status bits" "Reserved,Alignment,Debug event,Access flag/1st level,Reserved,Translation/1st level,Access flag/2nd level,Translation/2nd level,Sync. external/non-translation,Domain/1st level,Reserved,Domain/2nd level,Sync. external/on TTW/1st level,Permission/1st level,Sync. external/on TTW/2nd level,Permission/2nd level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async. external,Reserved,Async. parity/on memory access,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/1st level,Reserved,Sync. parity/on TTW/2nd level,?..."
endif
group.quad spr:0x30600++0x00
line.quad 0x00 "FAR_EL1,Fault Address Register (EL1)"
group.quad spr:0x34600++0x00
line.quad 0x00 "FAR_EL2,Fault Address Register (EL2)"
group.quad spr:0x36600++0x00
line.quad 0x00 "FAR_EL3,Fault Address Register (EL3)"
group.quad spr:0x34604++0x00
line.quad 0x00 "HPFAR_EL2,Hypervisor IPA Fault Address Register"
hexmask.quad 0x00 4.--39. 0x10 "FIPA,Faulting intermediate physical address"
group.quad spr:0x30C00++0x00
line.quad 0x00 "VBAR_EL1,Vector Base Address Register"
hexmask.quad 0x00 11.--63. 0x8 "VBA,Base address of the exception vectors for exceptions taken in this exception level"
group.quad spr:0x34C00++0x00
line.quad 0x00 "VBAR_EL2,Vector Base Address Register"
hexmask.quad 0x00 11.--63. 0x8 "VBA,Base address of the exception vectors for exceptions taken in this exception level"
group.quad spr:0x36C00++0x00
line.quad 0x00 "VBAR_EL3,Vector Base Address Register"
hexmask.quad 0x00 11.--63. 0x8 "VBA,Base address of the exception vectors for exceptions taken in this exception level"
rgroup.quad spr:0x30C10++0x00
line.quad 0x00 "ISR_EL1,Interrupt Status Register"
bitfld.quad 0x00 8. "A,External abort pending flag" "Not pending,Pending"
bitfld.quad 0x00 7. "I,Interrupt pending flag" "Not pending,Pending"
bitfld.quad 0x00 6. "F,Fast interrupt pending flag" "Not pending,Pending"
group.quad spr:0x36C02++0x00
line.quad 0x00 "RMR_EL3,Reset Management Register"
bitfld.quad 0x00 1. "RR,Reset Request" "Not requested,Requested"
bitfld.quad 0x00 0. "AA64,Determines which execution state the processor boots into after a warmreset" "AArch32,AArch64"
rgroup.quad spr:0x36C01++0x00
line.quad 0x00 "RVBAR_EL3,Reset Vector Base Address Register"
hexmask.quad 0x00 2.--43. 0x4 "RVBA,Reset Vector Base Address"
rgroup.quad spr:0x31F30++0x00
line.quad 0x00 "CBAR_EL1,Configuration Base Address Register"
hexmask.quad.long 0x00 18.--43. 1. "PERIPHBASE[43:18],Periphbase[43:18]"
group.quad spr:0x30D01++0x00
line.quad 0x00 "CONTEXTIDR_EL1,Context ID Register"
group.quad spr:0x33D02++0x00
line.quad 0x00 "TPIDR_EL0,Software Thread ID registers"
group.quad spr:0x33D03++0x00
line.quad 0x00 "TPIDRRO_EL0,Software Thread ID registers"
group.quad spr:0x30D04++0x00
line.quad 0x00 "TPIDR_EL1,Software Thread ID registers"
group.quad spr:0x34D02++0x00
line.quad 0x00 "TPIDR_EL2,Software Thread ID registers"
group.quad spr:0x36D02++0x00
line.quad 0x00 "TPIDR_EL3,Software Thread ID registers"
tree.end
tree "Memory Management Unit"
group.quad spr:0x30100++0x0
line.quad 0x00 "SCTLR_EL1,Control Register (EL1)"
bitfld.quad 0x00 26. "UCI,EL0 access enable (DC CVAU|DC CIVAC|DC CVAC|IC IVAU)" "Disabled,Enabled"
bitfld.quad 0x00 25. "EE,Exception endianess" "Little,Big"
newline
bitfld.quad 0x00 24. "E0E,Endianness of explicit data access at EL0" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.quad 0x00 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.quad 0x00 15. "UCT,EL0 access enable (CTR_EL0)" "Disabled,Enabled"
bitfld.quad 0x00 14. "DZE,EL0 access enable (DC ZVA)" "Disabled,Enabled"
newline
bitfld.quad 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
bitfld.quad 0x00 9. "UMA,User Mask Access" "Disabled,Enabled"
newline
bitfld.quad 0x00 8. "SED,SETEND Disable" "No,Yes"
bitfld.quad 0x00 7. "ITD,IT instruction disable" "No,Yes"
newline
bitfld.quad 0x00 6. "THEE,Thumb EE enable" "Disabled,Enabled"
bitfld.quad 0x00 5. "CP15BEN,CP15 barrier enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "SA0,EL0 stack alignment check enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x34100++0x0
line.quad 0x00 "SCTLR_EL2,Control Register (EL2)"
bitfld.quad 0x00 25. "EE,Exception endianess" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 12. "I,Instruction cache enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x36100++0x0
line.quad 0x00 "SCTLR_EL3,Control Register (EL3)"
bitfld.quad 0x00 25. "EE,Exception endianess" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.quad 0x00 12. "I,Instruction cache enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x34110++0x00
line.quad 0x00 "HCR_EL2,Hypervisor Configuration Register"
bitfld.quad 0x00 33. "ID,Stage 2 Instruction cache disable" "No,Yes"
bitfld.quad 0x00 32. "CD,Stage 2 Data cache disable" "No,Yes"
newline
bitfld.quad 0x00 31. "RW,Register width control for lower exception levels" "AArch32,EL1 is 64-bit"
bitfld.quad 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled"
newline
bitfld.quad 0x00 29. "HCD,Hypervisor Call Disable" "No,Yes"
bitfld.quad 0x00 28. "TDZ,Trap DC ZVA instruction" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. "TGE,Trap General Exceptions has an enhanced role when EL2 is using AArch64" "Disabled,Enabled"
bitfld.quad 0x00 26. "TVM,Trap Virtual Memory controls to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 25. "TTLB,Trap TLB maintenance instructions to EL2" "Disabled,Enabled"
bitfld.quad 0x00 24. "TPU,Trap Cache maintenance instructions to Point of Unificiation to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. "TPC,Trap Data/Unified Cache maintenance instructions to Point of Coherency tp EL2" "Disabled,Enabled"
bitfld.quad 0x00 22. "TSW,Trap Data/Unified Cache maintenance instructions by Set/Way to EL2" "Disabled,Enabled"
newline
bitfld.quad 0x00 21. "TACR,Trap Auxiliary Control Register" "Disabled,Enabled"
bitfld.quad 0x00 20. "TIDCP,Trap Implementation Dependent functionality" "Disabled,Enabled"
newline
bitfld.quad 0x00 19. "TSC,Trap SMC" "Disabled,Enabled"
bitfld.quad 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled"
newline
bitfld.quad 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled"
bitfld.quad 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled"
bitfld.quad 0x00 14. "TWE,Trap WFE" "Disabled,Enabled"
newline
bitfld.quad 0x00 13. "TWI,Trap WFI" "Disabled,Enabled"
bitfld.quad 0x00 12. "DC,Default Cacheable" "Disabled,Enabled"
newline
bitfld.quad 0x00 10.--11. "BSU,Barrier Shareability upgrade - determines the minimum shareability domain that is applied to any barrier executed from EL1 or EL0" "No effect,Inner Shareable,Outer Shareable,Full System"
bitfld.quad 0x00 9. "FB,Force broadcast" "Not forced,Forced"
newline
bitfld.quad 0x00 8. "VSE,Virtual System Error/Asynchronous Abort" "No pending,Pending"
bitfld.quad 0x00 7. "VI,Virtual IRQ Interrupt" "Not pending,Pending"
newline
bitfld.quad 0x00 6. "VF,Virtual FIQ Interrupt" "Not pending,Pending"
bitfld.quad 0x00 5. "AMO,Asynchronous abort and error interrupt routing" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "IMO,Physical IRQ Routing" "Disabled,Enabled"
bitfld.quad 0x00 3. "FMO,Physical FIQ Routing" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled"
bitfld.quad 0x00 1. "SWIO,Set/Way Invalidation Override" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "VM,Second stage of Translation enable" "Disabled,Enabled"
group.quad spr:0x30200++0x00
line.quad 0x00 "TTBR0_EL1,Translation Table Base Register 0 (EL1)"
hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
group.quad spr:0x30201++0x00
line.quad 0x00 "TTBR1_EL1,Translation Table Base Register 1 (EL1)"
hexmask.quad.word 0x00 48.--63. 1. "ASID,ASID for the translation table base address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
group.quad spr:0x30202++0x00
line.quad 0x00 "TCR_EL1,Translation Control Register (EL1)"
bitfld.quad 0x00 38. "TBI1,Top Byte Ignored 1" "Not ignored,Ignored"
bitfld.quad 0x00 37. "TBI0,Top Byte Ignored 0" "Not ignored,Ignored"
newline
bitfld.quad 0x00 36. "AS,ASID size" "8-bit,16-bit"
bitfld.quad 0x00 32.--34. "IPS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,42 bits/4 TB,44 bits/16 TB,48 bits/256 TB,Reserved,Reserved"
newline
bitfld.quad 0x00 30. "TG1,TTBR1_EL1 granule size" "4 KB,64 KB"
bitfld.quad 0x00 28.--29. "SH1,Shareability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 26.--27. "ORGN1,Outer cacheability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 24.--25. "IRGN1,Inner cacheability attribute for memory associated with translation table walks using TTBR1_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 23. "EPD1,Translation table walk disable for translations using TTBR1_EL1" "Enabled,Disabled"
bitfld.quad 0x00 22. "A1,Selects whether TTBR0_EL1 or TTBR1_EL1 defines the ASID" "TTBR0_EL1,TTBR1_EL1"
newline
bitfld.quad 0x00 16.--21. "T1SZ,Size offset of the memory region addressed by TTBR1_EL1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.quad 0x00 14. "TG0,TTBR0_EL1 granule size" "4 KB,64 KB"
newline
bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-shareable,Reserved,Outer shareable,Inner shareable"
bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL1" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memory region addressed by TTBR0_EL1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.quad spr:0x34200++0x00
line.quad 0x00 "TTBR0_EL2,Translation Table Base Register 0 (EL2)"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
group.quad spr:0x34202++0x00
line.quad 0x00 "TCR_EL2,Translation Control Register (EL2)"
bitfld.quad 0x00 20. "TBI,Top Byte Ignored" "Not ignored,Ignored"
bitfld.quad 0x00 16.--18. "PS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,Reserved,Reserved,Reserved,Reserved,Reserved"
newline
bitfld.quad 0x00 14.--15. "TG0,TTBR0_EL2 granule size" "4 KB,64 KB,16 KB,Reserved"
bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associatedwith translation table walks using TTBR0_EL2" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL2" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memoryregion addressed by TTBR0_EL2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.quad spr:0x36200++0x00
line.quad 0x00 "TTBR0_EL3,Translation Table Base Register 0 (EL3)"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
group.quad spr:0x36202++0x00
line.quad 0x00 "TCR_EL3,Translation Control Register (EL3)"
bitfld.quad 0x00 20. "TBI,Top Byte Ignored" "Not ignored,Ignored"
bitfld.quad 0x00 16.--18. "PS,Intermediate Physical Address Size" "32 bits/4 GB,36 bits/64 GB,40 bits/1 TB,Reserved,Reserved,Reserved,Reserved,Reserved"
newline
bitfld.quad 0x00 14.--15. "TG0,TTBR0_EL3 granule size" "4 KB,64 KB,16 KB,Reserved"
bitfld.quad 0x00 12.--13. "SH0,Shareability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-shareable,Reserved,Outer shareable,Inner shareable"
newline
bitfld.quad 0x00 10.--11. "ORGN0,Outer cacheability attribute for memory associatedwith translation table walks using TTBR0_EL3" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
bitfld.quad 0x00 8.--9. "IRGN0,Inner cacheability attribute for memory associated with translation table walks using TTBR0_EL3" "Non-cacheable,Write-Back Write-Allocate Cacheable,Write-Through Cacheable,Write-Back no Write-Allocate Cacheable"
newline
bitfld.quad 0x00 0.--5. "T0SZ,Size offset of the memoryregion addressed by TTBR0_EL3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.quad spr:0x34300++0x00
line.quad 0x00 "DACR32_EL2,Domain Access Control Register"
bitfld.quad 0x00 30.--31. "D15,Domain Access 15" "Denied,Client,Reserved,Manager"
bitfld.quad 0x00 28.--29. "D14,Domain Access 14" "Denied,Client,Reserved,Manager"
newline
bitfld.quad 0x00 26.--27. "D13,Domain Access 13" "Denied,Client,Reserved,Manager"
bitfld.quad 0x00 24.--25. "D12,Domain Access 12" "Denied,Client,Reserved,Manager"
newline
bitfld.quad 0x00 22.--23. "D11,Domain Access 11" "Denied,Client,Reserved,Manager"
bitfld.quad 0x00 20.--21. "D10,Domain Access 10" "Denied,Client,Reserved,Manager"
newline
bitfld.quad 0x00 18.--19. "D9,Domain Access 9" "Denied,Client,Reserved,Manager"
bitfld.quad 0x00 16.--17. "D8,Domain Access 8" "Denied,Client,Reserved,Manager"
newline
bitfld.quad 0x00 14.--15. "D7,Domain Access 7" "Denied,Client,Reserved,Manager"
bitfld.quad 0x00 12.--13. "D6,Domain Access 6" "Denied,Client,Reserved,Manager"
newline
bitfld.quad 0x00 10.--11. "D5,Domain Access 5" "Denied,Client,Reserved,Manager"
bitfld.quad 0x00 8.--9. "D4,Domain Access 4" "Denied,Client,Reserved,Manager"
newline
bitfld.quad 0x00 6.--7. "D3,Domain Access 3" "Denied,Client,Reserved,Manager"
bitfld.quad 0x00 4.--5. "D2,Domain Access 2" "Denied,Client,Reserved,Manager"
newline
bitfld.quad 0x00 2.--3. "D1,Domain Access 1" "Denied,Client,Reserved,Manager"
bitfld.quad 0x00 0.--1. "D0,Domain Access 0" "Denied,Client,Reserved,Manager"
if (((per.q(spr:0x30740))&0xF000000000000001)==0x0000000000000000)
group.quad spr:0x30740++0x00
line.quad 0x00 "PAR_EL1,Physical Address Register"
bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read"
bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "Device-nGnRnE,Reserved,Reserved,Reserved,Device,?..."
newline
hexmask.quad 0x00 12.--43. 0x1000 "PA[43:12],Physical Address"
bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes"
newline
bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
elif ((((per.q(spr:0x30740))&0x01)==0x00)&&(((per.q(spr:0x30740))&0xF000000000000000)==(0x1000000000000000||0x2000000000000000||0x3000000000000000||0x5000000000000000||0x6000000000000000||0x7000000000000000)))
group.quad spr:0x30740++0x00
line.quad 0x00 "PAR_EL1,Physical Address Register"
bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read"
newline
hexmask.quad 0x00 12.--43. 0x1000 "PA[43:12],Physical Address"
bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes"
newline
bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
elif (((per.q(spr:0x30740))&0x01)==0x00)
group.quad spr:0x30740++0x00
line.quad 0x00 "PAR_EL1,Physical Address Register"
bitfld.quad 0x00 60.--63. "ATTRH,Device memory or Normal memory plus Outer cacheability [Type/Cacheable/Allocate]" "Device,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read"
bitfld.quad 0x00 56.--59. "ATTRL,Device memory or Normal memory plus Inner cacheability [Type/Cacheable/Allocate]" "Reserved,Reserved,Reserved,Reserved,Normal/Non-cacheable,Reserved,Reserved,Reserved,Normal/Write-Through,Normal/Write-Through/Write,Normal/Write-Through/Read,Normal/Write-Through/Write|Read,Normal/Write-Back,Normal/Write-Back/Write,Normal/Write-Back/Read,Normal/Write-Back/Write|Read"
newline
hexmask.quad 0x00 12.--47. 0x1000 "PA[47:12],Physical Address"
bitfld.quad 0x00 9. "NS,The NS attribute for a translation table entry read from Secure state" "No,Yes"
newline
bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
else
group.quad spr:0x30740++0x00
line.quad 0x00 "PAR_EL1,Physical Address Register"
newline
bitfld.quad 0x00 9. "S,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2"
bitfld.quad 0x00 8. "PTW,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,Yes"
newline
bitfld.quad 0x00 1.--6. "FST,Fault Status Field" "TTBR0/TTBR1,Reserved,Reserved,Reserved,Reserved,Translation fault/1st level,Translation fault/2nd level,Translation fault/3rd level,Reserved,Access flag fault/1st level,Access flag fault/2nd level,Access flag fault/3rd level,Reserved,Permission fault/1st level,Permission fault/2nd level,Permission fault/3rd level,Synchronous external abort,Reserved,Reserved,Reserved,Reserved,Synchronous external abort on translation table walk/1st level,Synchronous external abort on translation table walk/2nd level,Synchronous external abort on translation table walk/3rd level,Synchronous parity error on memory access,Reserved,Reserved,Reserved,Reserved,Synchronous parity error on memory access on translation table walk/1st level,Synchronous parity error on memory access on translation table walk/2nd level,Synchronous parity error on memory access on translation table walk/3rd level,Reserved,Alignment fault,Debug event,?..."
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
endif
tree.open "Memory Attribute Indirection Registers"
group.quad spr:0x30A20++0x00
line.quad 0x00 "MAIR_EL1,Memory Attribute Indirection Register (EL1)"
bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.quad spr:0x34A20++0x00
line.quad 0x00 "MAIR_EL2,Memory Attribute Indirection Register (EL2)"
bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
group.quad spr:0x36A20++0x00
line.quad 0x00 "MAIR_EL3,Memory Attribute Indirection Register (EL3)"
bitfld.quad 0x00 60.--63. "ATTR7H,Attribute 7 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 56.--59. "ATTR7L,Attribute 7 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 52.--55. "ATTR6H,Attribute 6 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 48.--51. "ATTR6L,Attribute 6 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 44.--47. "ATTR5H,Attribute 5 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 40.--43. "ATTR5L,Attribute 5 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 36.--39. "ATTR4H,Attribute 4 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 32.--35. "ATTR4L,Attribute 4 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 28.--31. "ATTR3H,Attribute 3 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 24.--27. "ATTR3L,Attribute 3 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 20.--23. "ATTR2H,Attribute 2 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 16.--19. "ATTR2L,Attribute 2 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 12.--15. "ATTR1H,Attribute 1 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 8.--11. "ATTR1L,Attribute 1 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
newline
bitfld.quad 0x00 4.--7. "ATTR0H,Attribute 0 High" "Device memory,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Write-through transient,Normal Memory/Outer Non-Cacheable,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-back transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-through non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient,Normal Memory/Outer Write-back non-transient"
bitfld.quad 0x00 0.--3. "ATTR0L,Attribute 0 Low (Device mem/Normal mem)" "Device-nGnRnE/---,---/Inner Write-through transient,---/Inner Write-through transient,---/Inner Write-through transient,Device-nGnRE/Inner Non-Cacheable,---/Inner Write-back transient,---/Inner Write-back transient,---/Inner Write-back transient,Device-nGRE memory/Inner Write-through,---/Inner Write-through non-transient,---/Inner Write-through non-transient,---/Inner Write-through non-transient,Device-GRE memory/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient,---/Inner Write-back non-transient"
tree.end
newline
group.quad spr:0x30D01++0x00
line.quad 0x00 "CONTEXTIDR_EL1,Context ID Register"
tree.end
tree "Virtualization Extensions"
group.quad spr:0x34000++0x0
line.quad 0x00 "VPIDR_EL2,Virtualization Processor ID Register"
group.quad spr:0x34005++0x00
line.quad 0x00 "VMPIDR_EL2,Virtualization Multiprocessor ID Register"
hexmask.quad.long 0x00 0.--31. 1. "VMPIDR_EL2,MPIDR value returned by Non-secure EL1 reads of the MPIDR_EL1"
group.quad spr:0x34100++0x0
line.quad 0x00 "SCTLR_EL2,Control Register (EL2)"
bitfld.quad 0x00 25. "EE,Exception endianness" "Little,Big"
bitfld.quad 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
bitfld.quad 0x00 12. "I,Instruction cache enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "SA,SP stack alignment check enable" "Disabled,Enabled"
bitfld.quad 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.quad 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
group.quad spr:0x34110++0x00
line.quad 0x00 "HCR_EL2,Hypervisor Configuration Register"
bitfld.quad 0x00 33. "ID,Stage 2 instruction cache disable" "No,Yes"
bitfld.quad 0x00 32. "CD,Stage 2 data cache disable" "No,Yes"
bitfld.quad 0x00 31. "RW,Register width control for lower exception levels" "AArch32,AArch64"
newline
bitfld.quad 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled"
bitfld.quad 0x00 28. "TDZ,Traps DC ZVA instruction" "Disabled,Enabled"
bitfld.quad 0x00 27. "TGE,Trap General Exceptions" "Disabled,Enabled"
newline
bitfld.quad 0x00 26. "TVM,Trap Virtual Memory Controls" "Disabled,Enabled"
bitfld.quad 0x00 25. "TTLB,Trap TLB maintenance instructions" "Disabled,Enabled"
bitfld.quad 0x00 24. "TPU,Trap Cache maintenance instructions to point of unification" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. "TPC,Trap Data/Unified cache maintenance instructions to point of coherency" "Disabled,Enabled"
bitfld.quad 0x00 22. "TSW,Trap Data/Unified cache Set/Way instructions" "Disabled,Enabled"
bitfld.quad 0x00 21. "TAC,Trap Auxiliary Control Register Accesses" "Disabled,Enabled"
newline
bitfld.quad 0x00 20. "TIDCP,Trap Lockdown" "Disabled,Enabled"
bitfld.quad 0x00 19. "TSC,Trap SMC" "Disabled,Enabled"
bitfld.quad 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled"
newline
bitfld.quad 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled"
bitfld.quad 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled"
bitfld.quad 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled"
newline
bitfld.quad 0x00 14. "TWE,Trap WFE" "Disabled,Enabled"
bitfld.quad 0x00 13. "TWI,Trap WFI" "Disabled,Enabled"
bitfld.quad 0x00 12. "DC,Default Cacheable" "Disabled,Enabled"
newline
bitfld.quad 0x00 10.--11. "BSU,Barrier Shareability Upgrade" "0,1,2,3"
bitfld.quad 0x00 9. "FB,Force Broadcast of TLB maintenance BPIALL and ICIALLU instructions" "Disabled,Enabled"
bitfld.quad 0x00 8. "VSE,Virtual System Error/Asynchronous Abort" "Not aborted,Aborted"
newline
bitfld.quad 0x00 7. "VI,Virtual IRQ interrupt" "No interrupt,Interrupt"
bitfld.quad 0x00 6. "VF,Virtual FIQ interrupt" "No interrupt,Interrupt"
bitfld.quad 0x00 5. "AMO,A-bit Mask Override" "Not routed,Routed"
newline
bitfld.quad 0x00 4. "IMO,I-bit Mask Override" "Not routed,Routed"
bitfld.quad 0x00 3. "FMO,F-bit Mask Override" "Not routed,Routed"
bitfld.quad 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "SWIO,Set/Way Invalidation Override" "No override,Override"
bitfld.quad 0x00 0. "VM,Second Stage of Translation Enable" "Disabled,Enabled"
group.quad spr:0x34111++0x00
line.quad 0x00 "MDCR_EL2,Hypervisor Debug Control Register (EL2)"
bitfld.quad 0x00 11. "TDRA,Trap Debug ROM Access" "No effect,Valid"
bitfld.quad 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid"
bitfld.quad 0x00 9. "TDA,Trap Debug Access" "No effect,Valid"
newline
bitfld.quad 0x00 8. "TDE,Trap Debug Exceptions" "No effect,Valid"
bitfld.quad 0x00 7. "HPME,Hypervisor Performance Monitors Enable" "Disabled,Enabled"
bitfld.quad 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid"
newline
bitfld.quad 0x00 5. "TPMCR,Trap Performance Monitor Control Register accesses" "No effect,Valid"
bitfld.quad 0x00 0.--4. "HPMN,Defines the number of Performance Monitors counters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.quad spr:0x36131++0x00
line.quad 0x00 "MDCR_EL3,Hypervisor Debug Control Register (EL3)"
bitfld.quad 0x00 21. "EPMAD,External debugger access to Performance Monitors registers disabled" "No,Yes"
bitfld.quad 0x00 20. "EDAD,External debugger access to breakpoint and watchpointregisters disabled" "No,Yes"
bitfld.quad 0x00 17. "SPME,Secure performance monitors enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 16. "SDD,AArch64 secure debug disable" "No,Yes"
bitfld.quad 0x00 14.--15. "SPD32,AArch32 secure privileged debug" "Legacy,Reserved,Disabled,Enabled"
bitfld.quad 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid"
newline
bitfld.quad 0x00 9. "TDA,Trap Debug Access" "No effect,Valid"
bitfld.quad 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid"
group.quad spr:0x34112++0x00
line.quad 0x00 "CPTR_EL2,Architectural Feature Trap Register (EL2)"
bitfld.quad 0x00 31. "TCPAC,Trap Coprocessor Access Control" "Not trapped,Trapped"
bitfld.quad 0x00 10. "TFP,Traps instructions that access registers associated with Advanced SIMD and Floating-point execution from a lower exception level to EL2" "Not trapped,Trapped"
group.quad spr:0x36112++0x00
line.quad 0x00 "CPTR_EL3,Architectural Feature Trap Register (EL3)"
bitfld.quad 0x00 31. "TCPAC,Trap Coprocessor Access Control" "Not trapped,Trapped"
bitfld.quad 0x00 10. "TFP,Traps instructions that access registers associated with Advanced SIMD and Floating-point execution from a lower exception level to EL2" "Not trapped,Trapped"
group.quad spr:0x34113++0x00
line.quad 0x00 "HSTR_EL2,Hypervisor System Trap Register"
bitfld.quad 0x00 16. "TTEE,Trap T32EE" "Disabled,Enabled"
bitfld.quad 0x00 15. "T15,Trap to Hypervisor mode Non-secure priv 15" "No effect,Trap"
bitfld.quad 0x00 13. "T13,Trap to Hypervisor mode Non-secure priv 13" "No effect,Trap"
newline
bitfld.quad 0x00 12. "T12,Trap to Hypervisor mode Non-secure priv 12" "No effect,Trap"
bitfld.quad 0x00 11. "T11,Trap to Hypervisor mode Non-secure priv 11" "No effect,Trap"
bitfld.quad 0x00 10. "T10,Trap to Hypervisor mode Non-secure priv 10" "No effect,Trap"
newline
bitfld.quad 0x00 9. "T9,Trap to Hypervisor mode Non-secure priv 9" "No effect,Trap"
bitfld.quad 0x00 8. "T8,Trap to Hypervisor mode Non-secure priv 8" "No effect,Trap"
bitfld.quad 0x00 7. "T7,Trap to Hypervisor mode Non-secure priv 7" "No effect,Trap"
newline
bitfld.quad 0x00 6. "T6,Trap to Hypervisor mode Non-secure priv 6" "No effect,Trap"
bitfld.quad 0x00 5. "T5,Trap to Hypervisor mode Non-secure priv 5" "No effect,Trap"
bitfld.quad 0x00 4. "T4,Trap to Hypervisor mode Non-secure priv 4" "No effect,Trap"
newline
bitfld.quad 0x00 3. "T3,Trap to Hypervisor mode Non-secure priv 3" "No effect,Trap"
bitfld.quad 0x00 2. "T2,Trap to Hypervisor mode Non-secure priv 2" "No effect,Trap"
bitfld.quad 0x00 1. "T1,Trap to Hypervisor mode Non-secure priv 1" "No effect,Trap"
newline
bitfld.quad 0x00 0. "T0,Trap to Hypervisor mode Non-secure priv 0" "No effect,Trap"
group.quad spr:0x34210++0x00
line.quad 0x00 "VTTBR_EL2,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,VMID for the translation table"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base address"
if (((per.q(spr:0x34212))&0xC000)==0x0000)
group.quad spr:0x34212++0x00
line.quad 0x00 "VTCR_EL2,Virtualization Translation Control Register"
bitfld.quad 0x00 16.--18. "PS,Physical Address Size" "32 bits/4GB,36 bits/64GB,40 bits/1TB,42 bits/4TB,44 bits/16TB,48 bits/256TB,?..."
bitfld.quad 0x00 14.--15. "TG0,Granule size for the corresponding translation table base address register" "4 KB,64 KB,16 KB,?..."
bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using VTTBR" "Non-shareable,Outer Shareable,Inner Shareable,?..."
newline
bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using VTTBR" "Normal/Non-cacheable,Normal/Write-Back Write-Allocate,Normal/Write-Through,Normal/Write-Back no Write-Allocate"
bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks VTTBR" "Normal/Non-cacheable,Normal/Write-Back Write-Allocate,Normal/Write-Through,Normal/Write-Back no Write-Allocate"
bitfld.quad 0x00 6.--7. "SL0,Starting Level for VTCR addressed region" "Level 2,Level 1,Level 0,?..."
newline
bitfld.quad 0x00 0.--5. "T0SZ,The Size offset of the VTCR addressed region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
else
group.quad spr:0x34212++0x00
line.quad 0x00 "VTCR_EL2,Virtualization Translation Control Register"
bitfld.quad 0x00 16.--18. "PS,Physical Address Size" "32 bits/4GB,36 bits/64GB,40 bits/1TB,42 bits/4TB,44 bits/16TB,48 bits/256TB,?..."
bitfld.quad 0x00 14.--15. "TG0,Granule size for the corresponding translation table base address register" "4 KB,64 KB,16 KB,?..."
bitfld.quad 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using VTTBR" "Non-shareable,Outer Shareable,Inner Shareable,?..."
newline
bitfld.quad 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using VTTBR" "Normal/Non-cacheable,Normal/Write-Back Write-Allocate,Normal/Write-Through,Normal/Write-Back no Write-Allocate"
bitfld.quad 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks VTTBR" "Normal/Non-cacheable,Normal/Write-Back Write-Allocate,Normal/Write-Through,Normal/Write-Back no Write-Allocate"
bitfld.quad 0x00 6.--7. "SL0,Starting Level for VTCR addressed region" "Level 3,Level 2,Level 1,?..."
newline
bitfld.quad 0x00 0.--5. "T0SZ,The Size offset of the VTCR addressed region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.quad spr:0x30600++0x00
line.quad 0x00 "FAR_EL1,Fault Address Register (EL1)"
group.quad spr:0x34600++0x00
line.quad 0x00 "FAR_EL2,Fault Address Register (EL2)"
group.quad spr:0x36600++0x00
line.quad 0x00 "FAR_EL3,Fault Address Register (EL3)"
group.quad spr:0x34604++0x00
line.quad 0x00 "HPFAR_EL2,Hypervisor IPA Fault Address Register"
hexmask.quad 0x00 4.--39. 0x10 "FIPA,Faulting intermediate physical address"
tree.end
tree "Cache Control and Configuration"
rgroup.quad spr:0x33001++0x00
line.quad 0x00 "CTR_EL0,CTR_EL0"
bitfld.quad 0x0 29.--31. "FORMAT,Format" "Reserved,Reserved,Reserved,Reserved,ARMv7,?..."
bitfld.quad 0x0 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.quad 0x0 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.quad 0x0 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.quad 0x0 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,Reserved,Physical"
bitfld.quad 0x0 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,8 words,16 words,?..."
group.quad spr:0x32000++0x0
line.quad 0x00 "CSSELR_EL1,Cache Size Selection Register"
bitfld.quad 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,?..."
bitfld.quad 0x00 0. "IND,Instruction/Not Data" "Data/Unified,Instruction"
rgroup.quad spr:0x31001++0x0
line.quad 0x00 "CLIDR_EL1,Cache Level ID Register"
bitfld.quad 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Reserved,Level 1,?..."
bitfld.quad 0x00 24.--26. "LOC,Level of Coherency" "Reserved,Reserved,Level 3,?..."
bitfld.quad 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Reserved,Level 2,?..."
newline
bitfld.quad 0x00 18.--20. "CTYPE7,Cache type for levels 7" "No cache,?..."
bitfld.quad 0x00 15.--17. "CTYPE6,Cache type for levels 6" "No cache,?..."
bitfld.quad 0x00 12.--14. "CTYPE5,Cache type for levels 5" "No cache,?..."
newline
bitfld.quad 0x00 9.--11. "CTYPE4,Cache type for levels 4" "No cache,?..."
bitfld.quad 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,?..."
bitfld.quad 0x00 3.--5. "CTYPE2,Cache type for levels 2" "Reserved,Reserved,Reserved,Reserved,Unified,?..."
newline
bitfld.quad 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate,?..."
rgroup.quad spr:0x31000++0x0
line.quad 0x00 "CCSIDR_EL1,Current Cache Size ID Register"
bitfld.quad 0x00 31. "WT,Write-Through" "Not Supported,Supported"
bitfld.quad 0x00 30. "WB,Write-Back" "Not Supported,Supported"
bitfld.quad 0x00 29. "RA,Read-Allocate" "Not Supported,Supported"
newline
bitfld.quad 0x00 28. "WA,Write-Allocate" "Not Supported,Supported"
hexmask.quad.word 0x00 13.--27. 1. 1. "SETS,Number of Sets"
hexmask.quad.word 0x00 3.--12. 1. 1. "ASSOC,Associativity"
newline
bitfld.quad 0x00 0.--2. "LSIZE,Line Size" "16 bytes,32bytes,64 bytes,128 bytes,?..."
tree "Level 1 memory system"
group.quad spr:0x30F10++0x00
line.quad 0x00 "DL1DATA0_EL1,Data L1 Data 0 Register"
group.quad spr:0x30F11++0x00
line.quad 0x00 "DL1DATA1_EL1,Data L1 Data 1 Register"
group.quad spr:0x30F12++0x00
line.quad 0x00 "DL1DATA2_EL1,Data L1 Data 2 Register"
group.quad spr:0x30F13++0x00
line.quad 0x00 "DL1DATA3_EL1,Data L1 Data 3 Register"
group.quad spr:0x30F14++0x00
line.quad 0x00 "DL1DATA4_EL1,Data L1 Data 3 Register"
group.quad spr:0x30F00++0x00
line.quad 0x00 "IL1DATA0_EL1,Instruction L1 Data 0 Register"
group.quad spr:0x30F01++0x00
line.quad 0x00 "IL1DATA1_EL1,Instruction L1 Data 1 Register"
group.quad spr:0x30F02++0x00
line.quad 0x00 "IL1DATA2_EL1,Instruction L1 Data 2 Register"
group.quad spr:0x30F03++0x00
line.quad 0x00 "IL1DATA3_EL1,Instruction L1 Data 3 Register"
tree.end
tree "Level 2 memory system"
group.quad spr:0x31B02++0x0
line.quad 0x00 "L2CTLR_EL1,L2 Control Register"
bitfld.quad 0x00 31. "L2RSTDM,L2RSTDISABLE monitor" "Reset,No reset"
bitfld.quad 0x00 24.--25. "NCPU,Number of CPU" "1,2,3,4"
rbitfld.quad 0x00 23. "L2CP,L2 cache ECC protection" "Not supported,Supported"
newline
rbitfld.quad 0x00 22. "L1CECCPP,L1 Cache ECC and Parity protection" "Not supported,Supported"
bitfld.quad 0x00 21. "ECCPPEN,ECC and parity enable" "Disabled,Enabled"
bitfld.quad 0x00 20. "DIECCE,Data inline ECC enable" "Disabled,Enabled"
newline
rbitfld.quad 0x00 13. "L2AS,L2 arbitration slice" "Not present,Present"
rbitfld.quad 0x00 12. "L2TRAMS,L2 Tag RAM slice" "Not present,Present"
rbitfld.quad 0x00 10.--11. "L2DRAMS,L2 Data RAM slice" "Not present,1 present,2 present,?..."
newline
bitfld.quad 0x00 9. "L2TRAMS,L2 Tag RAM setup" "0 cycle,1 cycle"
bitfld.quad 0x00 6.--8. "L2TRAML,L2 Tag RAM latency" "2 cycles,2 cycles,3 cycles,4 cycles,5 cycles,5 cycles,5 cycles,5 cycles"
rbitfld.quad 0x00 5. "DRAMIL,L2 data RAM input latency" "0 cycle,1 cycle"
newline
bitfld.quad 0x00 0.--2. "DRAML,L2 data RAM latency" "2 cycles,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,6 cycles,6 cycles"
group.quad spr:0x31B03++0x0
line.quad 0x00 "L2ECTLR_EL1,L2 Extended Control Register"
bitfld.quad 0x00 30. "L2INTASYNCERR,L2 internal asynchronous error" "No error,Error"
bitfld.quad 0x00 29. "AXIASYNCERR,AXI asynchronous error" "No error,Error"
bitfld.quad 0x00 0.--2. "L2DRC,L2 dynamic retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.quad spr:0x31F00++0x00
line.quad 0x00 "L2ACTLR_EL1,L2 Auxiliary Control Register"
bitfld.quad 0x00 30.--31. "L2PLRUIP,Select the L2 PLRU insertion point" "MRU/LRU,MRU,3/4 LRU,LRU"
bitfld.quad 0x00 29. "L2RPLCPOL,Select the L2 cache replacement policy" "PLRU,Pseudo random"
bitfld.quad 0x00 28. "FL2TBCEA,Force L2 tag bank clock enable active" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. "FL2LCEA,Force L2 logic clock enable active" "Disabled,Enabled"
bitfld.quad 0x00 26. "FL2GICRCGEA,Force L2, GIC CPU interface, and Timer Regional Clock Gate(RCG) enables active" "Not forced,Forced"
bitfld.quad 0x00 25. "ESIAA,Enable single issue across all tag banks when the L2 arbitration replay threshold is reached" "Disabled,Enabled"
newline
bitfld.quad 0x00 24. "L2PLRUMD,Disable PLRU dynamic insertion and update policy" "No,Yes"
bitfld.quad 0x00 23. "DACPMUWLUT,Disable ACP MakeUnique and WriteLineUnique transactions" "No,Yes"
bitfld.quad 0x00 22. "DDTLSPR,Disable dynamic throttling of load/store prefetch requests" "No,Yes"
newline
bitfld.quad 0x00 18.--19. "DLASQ,Disable limit on NC/SO/Dev stores in Address Sequence Queue" "12 entries,10 entries,8 entries,No limit"
bitfld.quad 0x00 17. "DL2RRA,Disable L2 round-robin arbitration that only clocks through paths with an active requestor waiting to be arbitrated" "No,Yes"
bitfld.quad 0x00 16. "ERTSI,Enable replay threshold single issue" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. "DFFD,Disable fast forwarding of data from ACE or CHI to LS and IF" "No,Yes"
bitfld.quad 0x00 14. "EUCE,Enable UniqueClean evictions with data" "Disabled,Enabled"
bitfld.quad 0x00 13. "DCEO,Disable clean evict optimization" "No,Yes"
newline
bitfld.quad 0x00 12. "DPSHO,Disable set hazard optimization against prefetch entries" "No,Yes"
bitfld.quad 0x00 11. "DDSB,Disable DSB with no DVM synchronization" "No,Yes"
bitfld.quad 0x00 10. "DNSDAR,Disable Non-secure debug array read" "No,Yes"
newline
bitfld.quad 0x00 9. "DWHOBBRRQ,Disable set/way hazard optimization on back to back reads from the same CPU targeting the same set" "No,Yes"
bitfld.quad 0x00 8. "DDVMCMOMB,Disable DVM and cache maintenance operation message broadcast" "No,Yes"
bitfld.quad 0x00 7. "EHDT,Enable hazard detect timeout" "Disabled,Enabled"
newline
bitfld.quad 0x00 6. "DACESCHIST,Disable ACE shareable or CHI snoopable transactions from master" "No,Yes"
bitfld.quad 0x00 5. "DSWHOWWM,Disables set/way hazard optimization for WBNA/WT memory" "No,Yes"
bitfld.quad 0x00 4. "DWUWLUTFM,Disable WriteUnique and WriteLineUnique transactions from master" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "DCEPTE,Disable clean/evict push to external" "No,Yes"
bitfld.quad 0x00 2. "LTORPTB,Limit to one request per tag bank" "Normal,Limited"
bitfld.quad 0x00 1. "EARTT,Enable arbitration replay threshold timeout" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "DHPF,Disable hardware prefetch forwarding" "No,Yes"
group.quad spr:0x31F23++0x00
line.quad 0x00 "L2MERRSR_EL1,L2 Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
newline
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--21. "C/W,CPUID/Way" "CPU0 tag way 0,CPU0 tag way 1,CPU1 tag way 0,CPU1 tag way 1,CPU2 tag way 0,CPU2 tag way 1,CPU3 tag way 0,CPU3 tag way 1,?..."
newline
hexmask.quad.tbyte 0x00 0.--17. 1. "IND,Index"
tree.end
tree.end
tree "System Performance Monitor"
group.quad spr:0x339C0++0x00
line.quad 0x00 "PMCR_EL0,Performance Monitor Control Register"
hexmask.quad.byte 0x00 24.--31. 1. "IMP,Implementer code"
hexmask.quad.byte 0x00 16.--23. 1. "IDCODE,Identification code"
rbitfld.quad 0x00 11.--15. "N,Number of counters implemented" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,6,?..."
bitfld.quad 0x00 6. "LC,Long cycle count enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "DP,Disable CCNT when prohibited" "No,Yes"
bitfld.quad 0x00 4. "X,Export Enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "D,Clock Divider" "Every cycle,64th cycle"
bitfld.quad 0x00 2. "C,Clock Counter Reset" "No reset,Reset"
newline
bitfld.quad 0x00 1. "P,Performance Counter Reset" "No reset,Reset"
bitfld.quad 0x00 0. "E,All Counters Enable" "Disabled,Enabled"
group.quad spr:0x339C1++0x00
line.quad 0x00 "PMCNTENSET_EL0,Count Enable Set Register "
bitfld.quad 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "P5,Event Counter 5 enable bit" "Disabled,Enabled"
bitfld.quad 0x00 4. "P4,Event Counter 4 enable bit" "Disabled,Enabled"
bitfld.quad 0x00 3. "P3,Event Counter 3 enable bit" "Disabled,Enabled"
newline
bitfld.quad 0x00 2. "P2,Event Counter 2 enable bit" "Disabled,Enabled"
bitfld.quad 0x00 1. "P1,Event Counter 1 enable bit" "Disabled,Enabled"
bitfld.quad 0x00 0. "P0,Event Counter 0 enable bit" "Disabled,Enabled"
group.quad spr:0x339C2++0x00
line.quad 0x00 "PMCNTENCLR_EL0,Count Enable Clear Register"
bitfld.quad 0x00 31. "C,PMCCNTR enable" "Disabled/No effect,Enabled/Disable"
newline
eventfld.long 0x00 5. "P5,Event Counter 5 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 4. "P4,Event Counter 4 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 3. "P3,Event Counter 3 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
newline
eventfld.long 0x00 2. "P2,Event Counter 2 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 1. "P1,Event Counter 1 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 0. "P0,Event Counter 0 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
group.quad spr:0x339C3++0x00
line.quad 0x00 "PMOVSCLR_EL0,Performance Monitors Overflow Flag Status Clear Register"
bitfld.quad 0x00 31. "C,PMCCNTR overflow [Read/Write]" "No overflow/No effect,Overflow/Clear"
newline
eventfld.long 0x00 5. "P5,Event Counter 5 overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear"
eventfld.long 0x00 4. "P4,Event Counter 4 overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear"
eventfld.long 0x00 3. "P3,Event Counter 3 overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear"
newline
eventfld.long 0x00 2. "P2,Event Counter 2 overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear"
eventfld.long 0x00 1. "P1,Event Counter 1 overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear"
eventfld.long 0x00 0. "P0,Event Counter 0 overflow clear bit [Read/Write]" "No overflow/No effect,Overflow/Clear"
wgroup.quad spr:0x339C4++0x00
line.quad 0x00 "PMSWINC_EL0,Performance Monitors Software Increment Register"
bitfld.quad 0x00 5. "P5,Increment  PMN5" "No action,Increment"
bitfld.quad 0x00 4. "P4,Increment  PMN4" "No action,Increment"
bitfld.quad 0x00 3. "P3,Increment  PMN3" "No action,Increment"
newline
bitfld.quad 0x00 2. "P2,Increment  PMN2" "No action,Increment"
bitfld.quad 0x00 1. "P1,Increment  PMN1" "No action,Increment"
bitfld.quad 0x00 0. "P0,Increment  PMN0" "No action,Increment"
group.quad spr:0x339C5++0x00
line.quad 0x00 "PMSELR_EL0,Performance Monitor Select Register"
bitfld.quad 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,%d..."
tree.open "Common Event Identification Registers"
group.quad spr:0x339c6++0x00
line.quad 0x00 "PMCEID0_EL0,Common Event Identification Register 0"
bitfld.quad 0x00 30. "CH,Chain" "Not implemented,Implemented"
newline
bitfld.quad 0x00 29. "BC,Bus cycle" "Not implemented,Implemented"
bitfld.quad 0x00 28. "TW,Instruction architecturally executed condition check pass" "Not implemented,Implemented"
bitfld.quad 0x00 27. "IS,Instruction speculatively executed" "Not implemented,Implemented"
newline
bitfld.quad 0x00 26. "ME,Local memory error" "Not implemented,Implemented"
bitfld.quad 0x00 25. "BA,Bus access" "Not implemented,Implemented"
bitfld.quad 0x00 24. "DC2W,Level 2 data cache write-back" "Not implemented,Implemented"
newline
bitfld.quad 0x00 23. "DC2R,Level 2 data cache refill" "Not implemented,Implemented"
bitfld.quad 0x00 22. "DC2A,Level 2 data cache access" "Not implemented,Implemented"
bitfld.quad 0x00 21. "DC1W,Level 1 data cache write-back" "Not implemented,Implemented"
newline
bitfld.quad 0x00 20. "IC1A,Level 1 instruction cache access" "Not implemented,Implemented"
bitfld.quad 0x00 19. "MA,Data memory access" "Not implemented,Implemented"
bitfld.quad 0x00 18. "BP,Predictable branch speculatively executed" "Not implemented,Implemented"
newline
bitfld.quad 0x00 17. "CC,Cycle" "Not implemented,Implemented"
bitfld.quad 0x00 16. "BM,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented"
bitfld.quad 0x00 15. "UL,Instruction architecturally executed condition check pass  unaligned load or store" "Not implemented,Implemented"
newline
bitfld.quad 0x00 14. "BR,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented"
bitfld.quad 0x00 13. "BI,Instruction architecturally executed immediate branch" "Not implemented,Implemented"
bitfld.quad 0x00 12. "PW,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented"
newline
bitfld.quad 0x00 11. "CW,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented"
bitfld.quad 0x00 10. "ER,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented"
bitfld.quad 0x00 9. "ET,Exception taken" "Not implemented,Implemented"
newline
bitfld.quad 0x00 8. "IA,Instruction architecturally executed" "Not implemented,Implemented"
bitfld.quad 0x00 7. "ST,Instruction architecturally executed condition check pass store" "Not implemented,Implemented"
bitfld.quad 0x00 6. "LD,Instruction architecturally executed condition check pass load" "Not implemented,Implemented"
newline
bitfld.quad 0x00 5. "DT1R,Level 1 data TLB refill" "Not implemented,Implemented"
bitfld.quad 0x00 4. "DC1A,Level 1 data cache access" "Not implemented,Implemented"
bitfld.quad 0x00 3. "DC1R,Level 1 data cache refill" "Not implemented,Implemented"
newline
bitfld.quad 0x00 2. "IT1R,Level 1 instruction TLB refill" "Not implemented,Implemented"
bitfld.quad 0x00 1. "IC1R,Level 1 instruction cache refill" "Not implemented,Implemented"
bitfld.quad 0x00 0. "SI,Instruction architecturally executed condition check pass software increment" "Not implemented,Implemented"
tree.end
newline
group.quad spr:0x339D0++0x00
line.quad 0x00 "PMCCNTR_EL0,Performance Monitor Cycle Count Register"
group.quad spr:0x339D1++0x00
line.quad 0x00 "PMXEVTYPER_EL0,Performance Monitor Event Type Register"
group.quad spr:0x339D2++0x00
line.quad 0x00 "PMXEVCNTR_EL0,Performance Monitor Event Count Register"
group.quad spr:0x339E0++0x00
line.quad 0x00 "PMUSERENR_EL0,Performance Monitor User Enable Register"
bitfld.quad 0x00 3. "ER,Event counter read enable" "Disabled,Enabled"
bitfld.quad 0x00 2. "EC,Cycle counter read enable" "Disabled,Enabled"
bitfld.quad 0x00 1. "SW,Software Increment write enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "EN,User mode access enable" "Disabled,Enabled"
group.quad spr:0x309E1++0x00
line.quad 0x00 "PMINTENSET_EL1,Performance Monitor Interrupt Enable Set"
bitfld.quad 0x00 31. "C,Cycle counter Overflow Interrupt clear" "Disabled,Enabled"
newline
bitfld.quad 0x00 6. "P6,PMCNT6 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.quad 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.quad 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.quad 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.quad 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled"
group.quad spr:0x309E2++0x00
line.quad 0x00 "PMINTENCLR_EL1,Performance Monitor Interrupt Enable Clear"
eventfld.long 0x00 31. "C,PMCCNTR enable [Read/Write]" "Disabled/No effect,Enabled/Disable"
newline
eventfld.long 0x00  5. "P5,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00  4. "P4,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00  3. "P3,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
newline
eventfld.long 0x00  2. "P2,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00  1. "P1,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00  0. "P0,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
group.quad spr:0x339E3++0x00
line.quad 0x00 "PMOVSSET_EL0,Performance Monitor Overflow Flag Status Set Register"
group.quad spr:(0x33E80+0x0)++0x00
line.quad 0x00 "PMEVCNTR0_EL0,Performance Monitors Event Count Register 0"
group.quad spr:(0x33EC0+0x0)++0x00
line.quad 0x00 "PMEVTYPER0_EL0,Performance Monitors Selected Event Type Register 0"
bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
newline
hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad spr:(0x33E80+0x1)++0x00
line.quad 0x00 "PMEVCNTR1_EL0,Performance Monitors Event Count Register 1"
group.quad spr:(0x33EC0+0x1)++0x00
line.quad 0x00 "PMEVTYPER1_EL0,Performance Monitors Selected Event Type Register 1"
bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
newline
hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad spr:(0x33E80+0x2)++0x00
line.quad 0x00 "PMEVCNTR2_EL0,Performance Monitors Event Count Register 2"
group.quad spr:(0x33EC0+0x2)++0x00
line.quad 0x00 "PMEVTYPER2_EL0,Performance Monitors Selected Event Type Register 2"
bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
newline
hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad spr:(0x33E80+0x3)++0x00
line.quad 0x00 "PMEVCNTR3_EL0,Performance Monitors Event Count Register 3"
group.quad spr:(0x33EC0+0x3)++0x00
line.quad 0x00 "PMEVTYPER3_EL0,Performance Monitors Selected Event Type Register 3"
bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
newline
hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad spr:(0x33E80+0x4)++0x00
line.quad 0x00 "PMEVCNTR4_EL0,Performance Monitors Event Count Register 4"
group.quad spr:(0x33EC0+0x4)++0x00
line.quad 0x00 "PMEVTYPER4_EL0,Performance Monitors Selected Event Type Register 4"
bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
newline
hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad spr:(0x33E80+0x5)++0x00
line.quad 0x00 "PMEVCNTR5_EL0,Performance Monitors Event Count Register 5"
group.quad spr:(0x33EC0+0x5)++0x00
line.quad 0x00 "PMEVTYPER5_EL0,Performance Monitors Selected Event Type Register 5"
bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
newline
hexmask.quad.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.quad spr:0x33EF7++0x00
line.quad 0x00 "PMCCFILTR_EL0,Performance Monitors Cycle Count Filter Register"
bitfld.quad 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.quad 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.quad 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
bitfld.quad 0x00 26. "M,Secure EL3 filtering bit" "Disabled,Enabled"
tree.end
tree "System Timer Registers"
group.quad spr:0x33E00++0x00
line.quad 0x00 "CNTFRQ_EL0,Counter Frequency Register"
rgroup.quad spr:0x33E01++0x00
line.quad 0x00 "CNTPCT_EL0,Counter Physical Count Register"
group.quad spr:0x30E10++0x00
line.quad 0x00 "CNTKCTL_EL1,Timer PL1 Control Register"
bitfld.quad 0x00 9. "EL0PTEN,Controls whether the physical timer registers are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.quad 0x00 8. "EL0VTEN,Controls whether the virtual timer registers are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from the virtual counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0"
newline
bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled"
bitfld.quad 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.quad 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
group.quad spr:0x33E20++0x00
line.quad 0x00 "CNTP_TVAL_EL0,Counter PL1 Physical Compare Value Register"
group.quad spr:0x33E21++0x00
line.quad 0x00 "CNTP_CTL_EL0,Counter PL1 Physical Timer Control Register"
bitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.quad 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad spr:0x33E30++0x00
line.quad 0x00 "CNTV_TVAL_EL0,Counter PL1 Virtual Timer Value Register"
group.quad spr:0x33E31++0x00
line.quad 0x00 "CNTV_CTL_EL0,Counter PL1 Virtual Timer Control Register"
bitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.quad 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad spr:0x33E02++0x00
line.quad 0x00 "CNTVCT_EL0,Counter Virtual Count Register"
group.quad spr:0x33E22++0x00
line.quad 0x00 "CNTP_CVAL_EL0,Counter PL1 Physical Compare Value Register"
group.quad spr:0x33E32++0x00
line.quad 0x00 "CNTV_CVAL_EL0,Counter PL1 Virtual Compare Value Register"
group.quad spr:0x34E03++0x00
line.quad 0x00 "CNTVOFF_EL2,Counter Virtual Offset Register"
group.quad spr:0x34E10++0x00
line.quad 0x00 "CNTHCTL_EL2,Counter Non-secure PL2 Control Register"
bitfld.quad 0x00 4.--7. "EVNTI,Selects which bit is the trigger for the event stream generated from counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0"
bitfld.quad 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.quad 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
group.quad spr:0x34E20++0x00
line.quad 0x00 "CNTHP_TVAL_EL2,Counter Non-secure PL2 Physical Timer Value Register"
group.quad spr:0x34E21++0x00
line.quad 0x00 "CNTHP_CTL_EL2,Counter Non-secure PL2 Physical Timer Control Register"
bitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.quad 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad spr:0x34E22++0x00
line.quad 0x00 "CNTHP_CVAL_EL2,Counter Non-secure PL2 Physical Compare Value Register"
group.quad spr:0x37E20++0x00
line.quad 0x00 "CNTPS_TVAL_EL1,Counter-timer Physical SecureTimer TimerValue register"
group.quad spr:0x37E21++0x00
line.quad 0x00 "CNTPS_CTL_EL1,Counter-timer Physical Secure Timer Control register"
bitfld.quad 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.quad 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.quad 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad spr:0x37E22++0x00
line.quad 0x00 "CNTPS_CVAL_EL1,Counter-timer Physical Secure Timer CompareValue register"
tree.end
tree "Generic Interrupt Controller CPU Interface"
tree "AArch64 GIC Physical CPU Interface System Registers"
tree.open "Interrupt Controller Active Priorities Registers"
group.quad spr:0x30C84++0x00
line.quad 0x00 "ICC_AP0R0_EL1,Active Priorities 0 Register 0"
bitfld.quad 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.quad 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.quad 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.quad 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.quad 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.quad 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.quad 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.quad 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.quad 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.quad 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt"
bitfld.quad 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.quad 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.quad 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.quad 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.quad 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.quad 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.quad 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.quad 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.quad 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.quad 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt"
bitfld.quad 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.quad 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.quad 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.quad 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.quad 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.quad 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt"
group.quad spr:0x30C90++0x00
line.quad 0x00 "ICC_AP1R0_EL1,Active Priorities 1 Register 0"
bitfld.quad 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.quad 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.quad 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt"
bitfld.quad 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.quad 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt"
bitfld.quad 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.quad 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.quad 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt"
bitfld.quad 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.quad 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt"
bitfld.quad 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.quad 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.quad 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.quad 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.quad 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt"
bitfld.quad 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.quad 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt"
bitfld.quad 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.quad 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.quad 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt"
bitfld.quad 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.quad 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt"
bitfld.quad 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.quad 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.quad 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.quad 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt"
tree.end
newline
wgroup.quad spr:0x30CB6++0x00
line.quad 0x00 "ICC_ASGI1R_EL1,Alternate SGI Generation Register 1"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List"
group.quad spr:0x30C83++0x00
line.quad 0x00 "ICC_BPR0_EL1,Binary Point Register 0"
bitfld.quad 0x00 0.--2. "BINARYPOINT,Binary point" "0,1,2,3,4,5,6,7"
group.quad spr:0x30CC3++0x00
line.quad 0x00 "ICC_BPR1_EL1,Binary Point Register 1"
bitfld.quad 0x00 0.--2. "BINARYPOINT,Binary point" "0,1,2,3,4,5,6,7"
group.quad spr:0x30CC4++0x00
line.quad 0x00 "ICC_CTLR_EL1,Interrupt Control Registers for EL1"
rbitfld.quad 0x00 19. "EXTRANGE,Extended INTID range" "Not supported,Supported"
rbitfld.quad 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255"
newline
rbitfld.quad 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported"
rbitfld.quad 0x00 14. "SEIS,SEI Support" "Not supported,Supported"
bitfld.quad 0x00 11.--13. "IDBITS,Number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
newline
rbitfld.quad 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled"
bitfld.quad 0x00 1. "EOIMODE,Alias of ICC_MCTLR.EOImode_EL1" "0,1"
newline
bitfld.quad 0x00 0. "CBPR,Common Binary Point Register" "0,1"
group.quad spr:0x36CC4++0x00
line.quad 0x00 "ICC_CTLR_EL3,Interrupt Control Registers for EL3"
rbitfld.quad 0x00 19. "EXTRANGE,Extended INTID range" "Not supported,Supported"
rbitfld.quad 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255"
newline
rbitfld.quad 0x00 17. "NDS,Disable Security not supported" "Supported,Not supported"
newline
rbitfld.quad 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported"
rbitfld.quad 0x00 14. "SEIS,SEI Support" "Not supported,Supported"
bitfld.quad 0x00 11.--13. "IDBITS,Number of physical interruptidentifier bits supported" "16 bits,24 bits,?..."
newline
rbitfld.quad 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled"
bitfld.quad 0x00 5. "RM,Routing Modifier" "Normal,Special values"
newline
bitfld.quad 0x00 4. "EOIMODE_EL1NS,EOI mode for interrupts handledat non-secure EL1 and EL2" "0,1"
bitfld.quad 0x00 3. "EOIMODE_EL1S,EOI mode for interrupts handled at secure EL1" "0,1"
bitfld.quad 0x00 2. "EOIMODE_EL3,EOI mode for interrupts handled at EL3" "0,1"
newline
bitfld.quad 0x00 1. "CBPR_EL1NS,Non-secure accesses to GICC_BPR allowed." "Not allowed,Allowed"
bitfld.quad 0x00 0. "CBPR_EL1S,Secure EL1 accesses to ICC_BPR1 allowed" "Not allowed,Allowed"
wgroup.quad spr:0x30CB1++0x00
line.quad 0x00 "ICC_DIR_EL1,Deactivate Interrupt Register"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID of the interrupt to be deactivated"
wgroup.quad spr:0x30C81++0x00
line.quad 0x00 "ICC_EOIR0_EL1,End Of Interrupt Register 0"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR0_EL1 access"
wgroup.quad spr:0x30CC1++0x00
line.quad 0x00 "ICC_EOIR1_EL1,End Of Interrupt Register 1"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR1_EL1 access"
rgroup.quad spr:0x30C82++0x00
line.quad 0x00 "ICC_HPPIR0_EL1,Highest Priority Pending Interrupt Register 0"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt"
rgroup.quad spr:0x30CC2++0x00
line.quad 0x00 "ICC_HPPIR1_EL1,Highest Priority Pending Interrupt Register 1"
hexmask.quad.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt"
hgroup.quad spr:0x30C80++0x00
hide.long 0x00 "ICC_IAR0_EL1,Interrupt Acknowledge Register 0"
in
hgroup.quad spr:0x30CC0++0x00
hide.long 0x00 "ICC_IAR1_EL1,Interrupt Acknowledge Register 1"
in
newline
group.quad spr:0x30CC6++0x00
line.quad 0x00 "ICC_IGRPEN0_EL1,Interrupt Group Enable Register 0"
bitfld.quad 0x00 0. "ENABLE,Enable" "Disabled,Enabled"
group.quad spr:0x30CC7++0x00
line.quad 0x00 "ICC_IGRPEN1_EL1,Interrupt Group Enable Register 1 (EL1)"
bitfld.quad 0x00 0. "ENABLE,Enable" "Disabled,Enabled"
group.quad spr:0x36CC7++0x00
line.quad 0x00 "ICC_IGRPEN1_EL3,Interrupt Group Enable Register 1 (EL3)"
bitfld.quad 0x00 1. "ENABLEGRP1S,Enable Group 1 interrupts for the Secure state" "Disabled,Enabled"
bitfld.quad 0x00 0. "ENABLEGRP1NS,Enable Group 1 interrupts for the Non-secure state" "Disabled,Enabled"
group.quad spr:0x30460++0x00
line.quad 0x00 "ICC_PMR_EL1,Priority Mask Register"
hexmask.quad.byte 0x00 0.--7. 1. "PRIORITY,Priority mask level for the CPU interface"
rgroup.quad spr:0x30CB3++0x00
line.quad 0x00 "ICC_RPR_EL1,Running Priority Register"
hexmask.quad.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface"
wgroup.quad spr:0x30CB7++0x00
line.quad 0x00 "ICC_SGI0R_EL1,SGI Generation Register 0"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List"
wgroup.quad spr:0x30CB5++0x00
line.quad 0x00 "ICC_SGI1R_EL1,SGI Generation Register 1"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List"
group.quad spr:0x30CC5++0x00
line.quad 0x00 "ICC_SRE_EL1,System Register Enable Register for EL1"
bitfld.quad 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.quad 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
bitfld.quad 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
group.quad spr:0x34C95++0x00
line.quad 0x00 "ICC_SRE_EL2,System Register Enable Register for EL2"
bitfld.quad 0x00 3. "ENABLE,Enable lower exception level access" "Disabled,Enabled"
bitfld.quad 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.quad 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
newline
bitfld.quad 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
group.quad spr:0x36CC5++0x00
line.quad 0x00 "ICC_SRE_EL3,System Register Enable Register for EL3"
bitfld.quad 0x00 3. "ENABLE,Enable lower exception level access" "Disabled,Enabled"
bitfld.quad 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.quad 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
newline
bitfld.quad 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
tree.end
tree "AArch64 Virtual Interface Control System Registers"
group.quad spr:0x34C80++0x00
line.quad 0x00 "ICH_AP0R0_EL2,Interrupt Controller Hypervisor Active Priorities Register 0-0"
rgroup.quad spr:0x34CB3++0x00
line.quad 0x00 "ICH_EISR_EL2,Interrupt Controller End of Interrupt Status Register"
bitfld.quad 0x00 3. "STATUS3,EOI maintenance interrupt status bit for List register 3" "No interrupt,Interrupt"
bitfld.quad 0x00 2. "STATUS2,EOI maintenance interrupt status bit for List register 2" "No interrupt,Interrupt"
bitfld.quad 0x00 1. "STATUS1,EOI maintenance interrupt status bit for List register 1" "No interrupt,Interrupt"
newline
bitfld.quad 0x00 0. "STATUS0,EOI maintenance interrupt status bit for List register 0" "No interrupt,Interrupt"
rgroup.quad spr:0x34CB5++0x00
line.quad 0x00 "ICH_ELRSR_EL2,Interrupt Controller Empty List Register Status Register"
bitfld.quad 0x00 3. "STATUS3,Status bit for List register 3" "Interrupt,No interrupt"
bitfld.quad 0x00 2. "STATUS2,Status bit for List register 2" "Interrupt,No interrupt"
bitfld.quad 0x00 1. "STATUS1,Status bit for List register 1" "Interrupt,No interrupt"
newline
bitfld.quad 0x00 0. "STATUS0,Status bit for List register 0" "Interrupt,No interrupt"
group.quad spr:0x34CB0++0x00
line.quad 0x00 "ICH_HCR_EL2,Interrupt Controller Hypervisor Control Register"
bitfld.quad 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.quad 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR" "Not trapped,Trapped"
bitfld.quad 0x00 13. "TSEI,Trap all locally generated SEIs" "Not trapped,Trapped"
newline
bitfld.quad 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped"
bitfld.quad 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped"
bitfld.quad 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped"
newline
bitfld.quad 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled"
bitfld.quad 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.quad 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.quad 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled"
bitfld.quad 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled"
bitfld.quad 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled"
if (((per.q(spr:(0x34CC0+0x0)))&0x2000000000000000)==0x00)
group.quad spr:(0x34CC0+0x0)++0x00
line.quad 0x00 "ICH_LR0_EL2,Interrupt Controller List Register 0"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
else
group.quad spr:(0x34CC0+0x0)++0x00
line.quad 0x00 "ICH_LR0_EL2,Interrupt Controller List Register 0"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID, for hardware interrupts"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
endif
if (((per.q(spr:(0x34CC0+0x1)))&0x2000000000000000)==0x00)
group.quad spr:(0x34CC0+0x1)++0x00
line.quad 0x00 "ICH_LR1_EL2,Interrupt Controller List Register 1"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
else
group.quad spr:(0x34CC0+0x1)++0x00
line.quad 0x00 "ICH_LR1_EL2,Interrupt Controller List Register 1"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID, for hardware interrupts"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
endif
if (((per.q(spr:(0x34CC0+0x2)))&0x2000000000000000)==0x00)
group.quad spr:(0x34CC0+0x2)++0x00
line.quad 0x00 "ICH_LR2_EL2,Interrupt Controller List Register 2"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
else
group.quad spr:(0x34CC0+0x2)++0x00
line.quad 0x00 "ICH_LR2_EL2,Interrupt Controller List Register 2"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID, for hardware interrupts"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
endif
if (((per.q(spr:(0x34CC0+0x3)))&0x2000000000000000)==0x00)
group.quad spr:(0x34CC0+0x3)++0x00
line.quad 0x00 "ICH_LR3_EL2,Interrupt Controller List Register 3"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
bitfld.quad 0x00 41. "PINTID_EOI,End of Interrupt" "Interrupt,No interrupt"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
else
group.quad spr:(0x34CC0+0x3)++0x00
line.quad 0x00 "ICH_LR3_EL2,Interrupt Controller List Register 3"
bitfld.quad 0x00 62.--63. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.quad 0x00 61. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt" "Software,Hardware"
bitfld.quad 0x00 60. "GROUP,Indicates the group for this virtual interrupt" "Group 0,Group 1"
newline
hexmask.quad.byte 0x00 48.--55. 1. "PRIORITY,The priority of this interrupt"
hexmask.quad.word 0x00 32.--41. 1. "PINTID,Physical INTID, for hardware interrupts"
hexmask.quad.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
endif
rgroup.quad spr:0x34CB2++0x00
line.quad 0x00 "ICH_MISR_EL2,Interrupt Controller Maintenance Interrupt State Register"
bitfld.quad 0x00 7. "VGRP1D,VPE Group 1 Disabled" "Not asserted,Asserted"
bitfld.quad 0x00 6. "VGRP1E,VPE Group 1 Enabled" "Not asserted,Asserted"
bitfld.quad 0x00 5. "VGRP0D,VPE Group 0 Disabled" "Not asserted,Asserted"
newline
bitfld.quad 0x00 4. "VGRP0E,VPE Group 0 Enabled" "Not asserted,Asserted"
bitfld.quad 0x00 3. "NP,No Pending" "Not asserted,Asserted"
bitfld.quad 0x00 2. "LRENP,List Register Entry Not Present" "Not asserted,Asserted"
newline
bitfld.quad 0x00 1. "U,Underflow" "Not asserted,Asserted"
bitfld.quad 0x00 0. "EOI,End Of Interrupt" "Not asserted,Asserted"
group.quad spr:0x34CB7++0x00
line.quad 0x00 "ICH_VMCR_EL2,Interrupt Controller Virtual Machine Control Register"
hexmask.quad.byte 0x00 24.--31. 1. "VPMR,The priority mask level for the virtual CPU interface"
bitfld.quad 0x00 21.--23. "VBPR0,Virtual Binary Point Register Group 0" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]"
bitfld.quad 0x00 18.--20. "VBPR1,Virtual Binary Point Register, Group 1" ",[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]"
newline
bitfld.quad 0x00 9. "VEOIM,Controls whether a write to an End of Interrupt register also deactivates the virtual interrupt" "Disabled,Enabled"
bitfld.quad 0x00 4. "VCBPR,Virtual Common Binary Point Register" "Separate registers,Same register"
bitfld.quad 0x00 3. "VFIQEN,Virtual FIQ enable" "Virtual IRQs,Virtual FIQs"
newline
bitfld.quad 0x00 2. "VACKCTL,Virtual FIQ enable" "1022,Corresponding interrupt"
bitfld.quad 0x00 1. "VENG1,Virtual Group 1 interrupt enable" "Disabled,Enabled"
bitfld.quad 0x00 0. "VENG0,Virtual Group 0 interrupt enable" "Disabled,Enabled"
group.quad spr:0x34C94++0x00
line.quad 0x00 "ICH_VSEIR_EL2,Interrupt Controller Virtual System Error Interrupt Register"
rgroup.quad spr:0x34CB1++0x00
line.quad 0x00 "ICH_VTR_EL2,Interrupt Controller VGIC Type Register"
bitfld.quad 0x00 29.--31. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 26.--28. "PREBITS,The number of virtual preemption bits implemented, minus one" "0,1,2,3,4,5,6,7"
bitfld.quad 0x00 23.--25. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
newline
bitfld.quad 0x00 22. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,Supported"
bitfld.quad 0x00 21. "A3V,Affinity 3 Valid" "Only zero values supported,Non-zero values supported"
bitfld.quad 0x00 20. "NV4,GICv4 direct injection of virtual interrupts not supported" "Supported,Not supported"
newline
bitfld.quad 0x00 19. "TDS,Separate trapping of Non-secure EL1 writes to ICV_DIR_EL1 supported" "Not supported,Supported"
bitfld.quad 0x00 0.--4. "LISTREGS,The number of implemented List registers, minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
tree.end
tree.end
tree "Debug Registers"
rgroup.quad spr:0x23010++0x00
line.quad 0x00 "MDCCSR_EL0,Debug Comms Channel Status Register"
bitfld.quad 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full"
bitfld.quad 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full"
group.quad spr:0x20020++0x00
line.quad 0x00 "MDCCINT_EL1,Debug Comms Channel Interrupt Enable Register"
bitfld.quad 0x00 30. "RX,DCC interrupt enable controls" "Disabled,Enabled"
bitfld.quad 0x00 29. "TX,DCC interrupt enable controls" "Disabled,Enabled"
group.quad spr:0x23040++0x00
line.quad 0x00 "DBGDTR_EL0,Half Duplex Data Transfer Register"
hexmask.quad.long 0x00 32.--63. 1. "HW,HighWord - Write/read DTRRX/DTRTX value without changing RXfull/TXfull"
hexmask.quad.long 0x00 0.--31. 1. "LW,LowWord - Write/read DTRTX/DTRRX value without changing TXfull/RXfull"
hgroup.quad spr:0x23050++0x00
hide.long 0x00 "DBGDTRRX_EL0,Full Duplex Receive Data Transfer Register"
in
wgroup.quad spr:0x23050++0x00
line.quad 0x00 "DBGDTRTX_EL0,Full Duplex Transmit Data Transfer Register"
group.quad spr:0x24070++0x00
line.quad 0x00 "DBGVCR32_EL2,Vector Catch Register"
bitfld.quad 0x00 31. "NSF,FIQ vector catch enable in Non-secure state" "Disabled,Enabled"
bitfld.quad 0x00 30. "NSI,IRQ vector catch enable in Non-secure state" "Disabled,Enabled"
bitfld.quad 0x00 28. "NSD,Data Abort vector catch enable in Non-secure state" "Disabled,Enabled"
newline
bitfld.quad 0x00 27. "NSP,Prefetch Abort vector catch enable in Non-secure state" "Disabled,Enabled"
bitfld.quad 0x00 26. "NSS,Supervisor Call (SVC) vector catch enable in Non-secure state" "Disabled,Enabled"
bitfld.quad 0x00 25. "NSU,Undefined Instruction vector catch enable in Non-secure state" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. "SF,FIQ vector catch enable in Secure state" "Disabled,Enabled"
bitfld.quad 0x00 6. "SI,IRQ vector catch enable in Secure state" "Disabled,Enabled"
bitfld.quad 0x00 4. "SD,Data Abort vector catch enable in Secure state" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "SP,Prefetch Abort vector catch enable in Secure state" "Disabled,Enabled"
bitfld.quad 0x00 2. "SS,Supervisor Call (SVC) vector catch enable in Secure state" "Disabled,Enabled"
bitfld.quad 0x00 1. "SU,Undefined Instruction vector catch enable in Secure state" "Disabled,Enabled"
group.quad spr:0x20002++0x00
line.quad 0x00 "OSDTRRX_EL1,OS Lock Data Transfer Register"
if (((per.q(spr:0x20114)&0x02)==0x00))
group.quad spr:0x20022++0x00
line.quad 0x00 "MDSCR_EL1,Monitor Debug System Control Register"
rbitfld.quad 0x00 30. "RXFULL,Save/restore of EDSCR.RXfull" "Empty,Full"
rbitfld.quad 0x00 29. "TXFULL,Save/restore of EDSCR.TXfull" "Empty,Full"
newline
rbitfld.quad 0x00 27. "RXO,Save/restore of EDSCR.RXO" "Low,High"
rbitfld.quad 0x00 26. "TXU,Save/restore of EDSCR.TXU" "Low,High"
newline
rbitfld.quad 0x00 22.--23. "INTDIS,Save/restore of EDSCR.INTdis" "0,1,2,3"
rbitfld.quad 0x00 21. "TDA,Save/restore of EDSCR.TDA" "Low,High"
newline
bitfld.quad 0x00 15. "MDE,Monitor debug events" "Disabled,Enabled"
rbitfld.quad 0x00 14. "HDE,Save/restore of EDSCR.HDE" "Low,High"
newline
bitfld.quad 0x00 13. "KDE,Local (kernel) debug enable" "Disabled,Enabled"
bitfld.quad 0x00 12. "TDCC,Traps EL0 accesses to the DCC registers to EL1" "Disabled,Enabled"
newline
bitfld.quad 0x00 6. "ERR,Save/restore of EDSCR.ERR" "Low,High"
bitfld.quad 0x00 0. "SS,Software step control" "Disabled,Enabled"
else
group.quad spr:0x20022++0x00
line.quad 0x00 "MDSCR_EL1,Monitor Debug System Control Register"
bitfld.quad 0x00 30. "RXFULL,Save/restore of EDSCR.RXfull" "Empty,Full"
bitfld.quad 0x00 29. "TXFULL,Save/restore of EDSCR.TXfull" "Empty,Full"
newline
bitfld.quad 0x00 27. "RXO,Save/restore of EDSCR.RXO" "Low,High"
bitfld.quad 0x00 26. "TXU,Save/restore of EDSCR.TXU" "Low,High"
newline
bitfld.quad 0x00 22.--23. "INTDIS,Save/restore of EDSCR.INTdis" "0,1,2,3"
bitfld.quad 0x00 21. "TDA,Save/restore of EDSCR.TDA" "Low,High"
newline
bitfld.quad 0x00 15. "MDE,Monitor debug events" "Disabled,Enabled"
bitfld.quad 0x00 14. "HDE,Save/restore of EDSCR.HDE" "Low,High"
newline
bitfld.quad 0x00 13. "KDE,Local (kernel) debug enable" "Disabled,Enabled"
bitfld.quad 0x00 12. "TDCC,Traps EL0 accesses to the DCC registers to EL1" "Disabled,Enabled"
newline
bitfld.quad 0x00 6. "ERR,Save/restore of EDSCR.ERR" "Low,High"
bitfld.quad 0x00 0. "SS,Software step control" "Disabled,Enabled"
endif
group.quad spr:0x20032++0x00
line.quad 0x00 "OSDTRTX_EL1,OS Lock Data Transfer Register"
group.quad spr:0x20062++0x00
line.quad 0x00 "OSECCR_EL1,OS Lock Exception Catch Control Register"
rgroup.quad spr:0x20100++0x00
line.quad 0x00 "MDRAR_EL1,Debug ROM Address Register"
hexmask.quad 0x00 12.--43. 0x10 "ROMADDR,ROM base physical address"
bitfld.quad 0x00 0.--1. "VALID,ROM address valid" "Invalid,Reserved,Reserved,Valid"
wgroup.quad spr:0x20104++0x00
line.quad 0x00 "OSLAR_EL1,OS Lock Access Register"
bitfld.quad 0x00 0. "OSLK,OS lock" "Unlock,Lock"
rgroup.quad spr:0x20114++0x00
line.quad 0x00 "OSLSR_EL1,OS Lock Status Register"
bitfld.quad 0x00 2. "NTT,Not 32-bit access" "Low,High"
bitfld.quad 0x00 1. "OSLK,OS lock status" "Not locked,Locked"
bitfld.quad 0x00 0. 3. "OSLM,OS lock model implemented field" "Reserved,Reserved,Implemented,?..."
group.quad spr:0x20134++0x00
line.quad 0x00 "OSDLR_EL1,OS Double-lock Register"
bitfld.quad 0x00 0. "DLK,OS double-lock control" "Not locked,Locked"
group.quad spr:0x20144++0x00
line.quad 0x00 "DBGPRCR_EL1,Debug Power/Reset Control Register"
bitfld.quad 0x00 0. "CORENPDRQ,Core no powerdown request" "No,Yes"
group.quad spr:0x20786++0x00
line.quad 0x00 "DBGCLAIMSET_EL1,Claim Tag register Set"
bitfld.quad 0x00 7. "CT7,Claim Tag 7 Set" "Not set,Set"
bitfld.quad 0x00 6. "CT6,Claim Tag 6 Set" "Not set,Set"
newline
bitfld.quad 0x00 5. "CT5,Claim Tag 5 Set" "Not set,Set"
bitfld.quad 0x00 4. "CT4,Claim Tag 4 Set" "Not set,Set"
newline
bitfld.quad 0x00 3. "CT3,Claim Tag 3 Set" "Not set,Set"
bitfld.quad 0x00 2. "CT2,Claim Tag 2 Set" "Not set,Set"
newline
bitfld.quad 0x00 1. "CT1,Claim Tag 1 Set" "Not set,Set"
bitfld.quad 0x00 0. "CT0,Claim Tag 0 Set" "Not set,Set"
group.quad spr:0x20796++0x00
line.quad 0x00 "DBGCLAIMCLR_EL1,Claim Tag register Clear"
bitfld.quad 0x00 7. "CT7,Claim Tag 7 Clear" "Not cleared,Cleared"
bitfld.quad 0x00 6. "CT6,Claim Tag 6 Clear" "Not cleared,Cleared"
newline
bitfld.quad 0x00 5. "CT5,Claim Tag 5 Clear" "Not cleared,Cleared"
bitfld.quad 0x00 4. "CT4,Claim Tag 4 Clear" "Not cleared,Cleared"
newline
bitfld.quad 0x00 3. "CT3,Claim Tag 3 Clear" "Not cleared,Cleared"
bitfld.quad 0x00 2. "CT2,Claim Tag 2 Clear" "Not cleared,Cleared"
newline
bitfld.quad 0x00 1. "CT1,Claim Tag 1 Clear" "Not cleared,Cleared"
bitfld.quad 0x00 0. "CT0,Claim Tag 0 Clear" "Not cleared,Cleared"
if (((per.q(spr:0x207e6))&0xAA)==0xAA)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.q(spr:0x207e6))&0xAA)==0xA8)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.q(spr:0x207e6))&0xAA)==0xA2)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.q(spr:0x207e6))&0xAA)==0xA0)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.q(spr:0x207e6))&0xAA)==0x8A)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.q(spr:0x207e6))&0xAA)==0x88)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.q(spr:0x207e6))&0xAA)==0x82)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.q(spr:0x207e6))&0xAA)==0x80)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.q(spr:0x207e6))&0xAA)==0x2A)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.q(spr:0x207e6))&0xAA)==0x28)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.q(spr:0x207e6))&0xAA)==0x22)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.q(spr:0x207e6))&0xAA)==0x20)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.q(spr:0x207e6))&0xAA)==0x0A)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.q(spr:0x207e6))&0xAA)==0x08)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.q(spr:0x207e6))&0xAA)==0x02)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.quad 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.q(spr:0x207e6))&0xAA)==0x00)
rgroup.quad spr:0x207e6++0x00
line.quad 0x00 "DBGAUTHSTATUS_EL1,Authentication Status register"
bitfld.quad 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.quad 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
endif
group.quad spr:0x33450++0x00
line.quad 0x00 "DSPSR_EL0,Debug Saved Processor Status Register"
group.quad spr:0x33451++0x00
line.quad 0x00 "DLR_EL0,Debug Link Register"
tree.end
tree "Breakpoint Registers"
tree "Breakpoint 0"
if (((per.q(spr:(0x20005+0x0)))&0xA00000)==0x000000)
group.quad spr:(0x20004+0x0)++0x00
line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.q(spr:(0x20005+0x0)))&0xA00000)==0x800000)
group.quad spr:(0x20004+0x0)++0x00
line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
elif (((per.q(spr:(0x20005+0x0)))&0xA00000)==0x200000)
group.quad spr:(0x20004+0x0)++0x00
line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
else
group.quad spr:(0x20004+0x0)++0x00
line.quad 0x00 "DBGBVR0_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
if (((per.q(spr:0x20005+0x0))&0x400000)==0x400000)
group.quad spr:(0x20005+0x0)++0x0
line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,Reserved,Reserved"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
elif (((per.q(spr:0x20005+0x0))&0x800000)==0x800000)
group.quad spr:(0x20005+0x0)++0x0
line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Reserved"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
else
group.quad spr:(0x20005+0x0)++0x0
line.quad 0x00 "DBGBCR0_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 1"
if (((per.q(spr:(0x20005+0x10)))&0xA00000)==0x000000)
group.quad spr:(0x20004+0x10)++0x00
line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.q(spr:(0x20005+0x10)))&0xA00000)==0x800000)
group.quad spr:(0x20004+0x10)++0x00
line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
elif (((per.q(spr:(0x20005+0x10)))&0xA00000)==0x200000)
group.quad spr:(0x20004+0x10)++0x00
line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
else
group.quad spr:(0x20004+0x10)++0x00
line.quad 0x00 "DBGBVR1_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
if (((per.q(spr:0x20005+0x10))&0x400000)==0x400000)
group.quad spr:(0x20005+0x10)++0x0
line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,Reserved,Reserved"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
elif (((per.q(spr:0x20005+0x10))&0x800000)==0x800000)
group.quad spr:(0x20005+0x10)++0x0
line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Reserved"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
else
group.quad spr:(0x20005+0x10)++0x0
line.quad 0x00 "DBGBCR1_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 2"
if (((per.q(spr:(0x20005+0x20)))&0xA00000)==0x000000)
group.quad spr:(0x20004+0x20)++0x00
line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.q(spr:(0x20005+0x20)))&0xA00000)==0x800000)
group.quad spr:(0x20004+0x20)++0x00
line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
elif (((per.q(spr:(0x20005+0x20)))&0xA00000)==0x200000)
group.quad spr:(0x20004+0x20)++0x00
line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
else
group.quad spr:(0x20004+0x20)++0x00
line.quad 0x00 "DBGBVR2_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
if (((per.q(spr:0x20005+0x20))&0x400000)==0x400000)
group.quad spr:(0x20005+0x20)++0x0
line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,Reserved,Reserved"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
elif (((per.q(spr:0x20005+0x20))&0x800000)==0x800000)
group.quad spr:(0x20005+0x20)++0x0
line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Reserved"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
else
group.quad spr:(0x20005+0x20)++0x0
line.quad 0x00 "DBGBCR2_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 3"
if (((per.q(spr:(0x20005+0x30)))&0xA00000)==0x000000)
group.quad spr:(0x20004+0x30)++0x00
line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.q(spr:(0x20005+0x30)))&0xA00000)==0x800000)
group.quad spr:(0x20004+0x30)++0x00
line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
elif (((per.q(spr:(0x20005+0x30)))&0xA00000)==0x200000)
group.quad spr:(0x20004+0x30)++0x00
line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
else
group.quad spr:(0x20004+0x30)++0x00
line.quad 0x00 "DBGBVR3_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
if (((per.q(spr:0x20005+0x30))&0x400000)==0x400000)
group.quad spr:(0x20005+0x30)++0x0
line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,Reserved,Reserved"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
elif (((per.q(spr:0x20005+0x30))&0x800000)==0x800000)
group.quad spr:(0x20005+0x30)++0x0
line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Reserved"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
else
group.quad spr:(0x20005+0x30)++0x0
line.quad 0x00 "DBGBCR3_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 4"
if (((per.q(spr:(0x20005+0x40)))&0xA00000)==0x000000)
group.quad spr:(0x20004+0x40)++0x00
line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.q(spr:(0x20005+0x40)))&0xA00000)==0x800000)
group.quad spr:(0x20004+0x40)++0x00
line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
elif (((per.q(spr:(0x20005+0x40)))&0xA00000)==0x200000)
group.quad spr:(0x20004+0x40)++0x00
line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
else
group.quad spr:(0x20004+0x40)++0x00
line.quad 0x00 "DBGBVR4_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
if (((per.q(spr:0x20005+0x40))&0x400000)==0x400000)
group.quad spr:(0x20005+0x40)++0x0
line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,Reserved,Reserved"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
elif (((per.q(spr:0x20005+0x40))&0x800000)==0x800000)
group.quad spr:(0x20005+0x40)++0x0
line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Reserved"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
else
group.quad spr:(0x20005+0x40)++0x0
line.quad 0x00 "DBGBCR4_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree "Breakpoint 5"
if (((per.q(spr:(0x20005+0x50)))&0xA00000)==0x000000)
group.quad spr:(0x20004+0x50)++0x00
line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register"
hexmask.quad 0x00 2.--48. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.q(spr:(0x20005+0x50)))&0xA00000)==0x800000)
group.quad spr:(0x20004+0x50)++0x00
line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
elif (((per.q(spr:(0x20005+0x50)))&0xA00000)==0x200000)
group.quad spr:(0x20004+0x50)++0x00
line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
else
group.quad spr:(0x20004+0x50)++0x00
line.quad 0x00 "DBGBVR5_EL1,Breakpoint Value Register"
hexmask.quad.byte 0x00 32.--39. 1. "VMID,VMID value for comparison"
hexmask.quad.long 0x00 0.--31. 1. "CONTEXTID,Context ID"
endif
if (((per.q(spr:0x20005+0x50))&0x400000)==0x400000)
group.quad spr:(0x20005+0x50)++0x0
line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,Reserved,Reserved"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
elif (((per.q(spr:0x20005+0x50))&0x800000)==0x800000)
group.quad spr:(0x20005+0x50)++0x0
line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Reserved"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
else
group.quad spr:(0x20005+0x50)++0x0
line.quad 0x00 "DBGBCR5_EL1,Breakpoint Control Register"
bitfld.quad 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.quad 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.quad 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.quad 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Higher mode control" "Disabled,Enabled"
newline
bitfld.quad 0x00 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.quad 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
endif
tree.end
tree.end
tree "Watchpoint Control Registers"
tree "Watchpoint 0"
group.quad spr:(0x20006+0x0)++0x00
line.quad 0x00 "DBGWVR0_EL1,Watchpoint Value Register (AArch64)"
hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address"
group.quad spr:(0x20007+0x0)++0x00
line.quad 0x00 "DBGWCR0_EL1,Watchpoint Control Register"
bitfld.quad 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled"
hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select"
newline
bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both"
bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled"
tree.end
tree "Watchpoint 1"
group.quad spr:(0x20006+0x10)++0x00
line.quad 0x00 "DBGWVR1_EL1,Watchpoint Value Register (AArch64)"
hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address"
group.quad spr:(0x20007+0x10)++0x00
line.quad 0x00 "DBGWCR1_EL1,Watchpoint Control Register"
bitfld.quad 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled"
hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select"
newline
bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both"
bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled"
tree.end
tree "Watchpoint 2"
group.quad spr:(0x20006+0x20)++0x00
line.quad 0x00 "DBGWVR2_EL1,Watchpoint Value Register (AArch64)"
hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address"
group.quad spr:(0x20007+0x20)++0x00
line.quad 0x00 "DBGWCR2_EL1,Watchpoint Control Register"
bitfld.quad 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled"
hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select"
newline
bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both"
bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled"
tree.end
tree "Watchpoint 3"
group.quad spr:(0x20006+0x30)++0x00
line.quad 0x00 "DBGWVR3_EL1,Watchpoint Value Register (AArch64)"
hexmask.quad 0x00 2.--48. 0x4 "ADDRESS,Data address"
group.quad spr:(0x20007+0x30)++0x00
line.quad 0x00 "DBGWCR3_EL1,Watchpoint Control Register"
bitfld.quad 0x00 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.quad 0x00 20. "WT,Watchpoint type" "Unlinked,Linked"
bitfld.quad 0x00 16.--19. "LBN,Linked breakpoint number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.quad 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.quad 0x00 13. "HMC,Hypervisor mode control" "Disabled,Enabled"
hexmask.quad.byte 0x00 5.--12. 1. "BAS,Byte address select"
newline
bitfld.quad 0x00 3.--4. "LSC,Load/store control" "Reserved,Load,Store,Both"
bitfld.quad 0x00 1.--2. "PAC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.quad 0x00 0. "E,Enable" "Disabled,Enabled"
tree.end
tree.end
tree.end
tree.open "AArch32"
tree "ID Registers"
rgroup.long c15:0x0000++0x00
line.long 0x00 "MIDR,Main ID Register"
hexmask.long.byte 0x00 24.--31. 1. "IMPL,Implementer code"
bitfld.long 0x00 20.--23. "VAR,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "ARCH, Architecture" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,ARMv8"
newline
hexmask.long.word 0x00 4.--15. 1. "PART,Primary Part Number"
bitfld.long 0x00 0.--3. "REV,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long c15:0x0100++0x00
line.long 0x00 "CTR,Cache Type Register"
bitfld.long 0x00 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x00 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x00 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x00 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,Reserved,PIPT"
bitfld.long 0x00 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
rgroup.long c15:0x0300++0x00
line.long 0x00 "TLBTR,TLB Type Register"
bitfld.long 0x00 0. "NU,Not Unified. Indicates whether the implementation has a unified TLB" "Unified,"
rgroup.long c15:0x0500++0x00
line.long 0x00 "MPIDR,Multiprocessor Affinity Register"
bitfld.long 0x00 30. "U,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,Uniprocessor"
newline
bitfld.long 0x00 24. "MT,Lowest level of affinity consist of logical processors" "Largery independent,Very interdependent"
hexmask.long.byte 0x00 16.--23. 1. "AFF2,Affinity level 2. Second highest level affinity field"
hexmask.long.byte 0x00 8.--15. 1. "AFF1,Affinity level 1. Third highest level affinity field"
newline
bitfld.long 0x00 0.--1. "CPUID,CPU ID" "1,2,3,4"
rgroup.long c15:0x0600++0x00
line.long 0x00 "REVIDR,Revision ID Register"
rgroup.long c15:0x0410++0x00
line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0"
bitfld.long 0x00 28.--31. "IS,Indicates innermost shareability domain implemented" "Reserved,Implemented,?..."
bitfld.long 0x00 24.--27. "FCSE,Fast Context Switch Memory Mappings Support" "Not supported,?..."
bitfld.long 0x00 20.--23. "AR,Auxiliary Register Support" "Reserved,Reserved,ACTLR/AIFSR/ADFSR,?..."
newline
bitfld.long 0x00 16.--19. "TCM,TCM and Associated DMA Support" "Not supported,?..."
bitfld.long 0x00 12.--15. "SL,Shareability levels" "Reserved,Implemented 2 levels,?..."
bitfld.long 0x00 8.--11. "OSS,Outer Shareable Support" "Reserved,Implemented,?..."
newline
bitfld.long 0x00 4.--7. "PMSA,Physical Memory System Architecture (PMSA) Support" "Not supported,?..."
bitfld.long 0x00 0.--3. "VMSA,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
rgroup.long c15:0x0510++0x00
line.long 0x00 "ID_MMFR1,Memory Model Feature Register 1"
bitfld.long 0x00 28.--31. "BTB,Branch Predictor" "Reserved,Reserved,Reserved,Reserved,Not required,?..."
bitfld.long 0x00 24.--27. "L1TCO,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..."
bitfld.long 0x00 20.--23. "L1UCMO,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..."
newline
bitfld.long 0x00 16.--19. "L1HCMO,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.long 0x00 12.--15. "L1UCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "L1HCLMOSW,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "L1UCLMOMVA,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..."
bitfld.long 0x00 0.--3. "L1HCLMOMVA,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..."
rgroup.long c15:0x0610++0x00
line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2"
bitfld.long 0x00 28.--31. "HAF,Hardware Access Flag Support" "Not supported,?..."
bitfld.long 0x00 24.--27. "WFI,Wait for Interrupt Stalling Support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "MBF,Memory Barrier Operations Support" "Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "UTLBMO,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "HTLBMO,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "HL1CMRO,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "HL1BPCRO,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..."
bitfld.long 0x00 0.--3. "HL1FPCRO,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..."
rgroup.long c15:0x0710++0x00
line.long 0x00 "ID_MMFR3,Memory Model Feature Register 3"
bitfld.long 0x00 28.--31. "SS,Supersection support" "Supported,?..."
bitfld.long 0x00 24.--27. "CMEMSZ,Cache memory size" "Reserved,Reserved,1TByte,?..."
bitfld.long 0x00 20.--23. "CW,Coherent walk" "Reserved,Supported,?..."
newline
bitfld.long 0x00 12.--15. "MB,Maintenance broadcast Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "BPM,Invalidate Branch predictor Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "HCMOSW,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "HCMOMVA,Invalidate Cache MVA Support" "Reserved,Supported,?..."
rgroup.long c15:0x0620++0x00
line.long 0x00 "ID_MMFR4,ID_MMFR4"
bitfld.long 0x00 4.--7. "AC2,Extension of ACTLR and HACTLR by ACTLR2 and HACTLR2" "Not implemented, implemented,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved"
rgroup.long c15:0x0020++0x00
line.long 0x00 "ID_ISAR0,Instruction Set Attribute Register 0"
bitfld.long 0x00 24.--27. "DIVI,Divide Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "DEBI,Debug Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 16.--19. "CI,Coprocessor Instructions Support" "Not supported,?..."
newline
bitfld.long 0x00 12.--15. "CBI,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "BI,Bitfield Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "BCI,Bit Counting Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "SI,Swap Instructions Support" "Not supported,?..."
rgroup.long c15:0x0120++0x00
line.long 0x00 "ID_ISAR1,Instruction Set Attribute Register 1"
bitfld.long 0x00 28.--31. "JI,Jazelle Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 24.--27. "INTI,Interwork Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "IMMI,Immediate Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "ITEI,If Then Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "EXTI,Extend Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "EARI,Exception A and R Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "EXIN,Exception in ARM Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "ENDI,Endian Instructions Support" "Reserved,Supported,?..."
rgroup.long c15:0x0220++0x00
line.long 0x00 "ID_ISAR2,Instruction Set Attribute Register 2"
bitfld.long 0x00 28.--31. "RI,Reversal Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 24.--27. "PSRI,PSR Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "UMI,Advanced Unsigned Multiply Instructions Support" "Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "SMI,Advanced Signed Multiply Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "MI,Multiply Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "II,Multi-Access Interruptible Instructions Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "MHI,Memory Hint Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "LSI,Load and Store Instructions Support" "Reserved,Reserved,Supported,?..."
rgroup.long c15:0x0320++0x00
line.long 0x00 "ID_ISAR3,Instruction Set Attribute Register 3"
bitfld.long 0x00 28.--31. "TEEEI,Thumb-EE Extensions Support" "Not supported,?..."
bitfld.long 0x00 24.--27. "NOPI,True NOP Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 20.--23. "TCI,Thumb Copy Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 16.--19. "TBI,Table Branch Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SPI,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "SVCI,SVC Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "SIMDI,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "SI,Saturate Instructions Support" "Reserved,Supported,?..."
rgroup.long c15:0x0420++0x00
line.long 0x00 "ID_ISAR4,Instruction Set Attribute Register 4"
bitfld.long 0x00 28.--31. "SWP_FRAC,Memory System Locking Support" "Not supported,?..."
bitfld.long 0x00 24.--27. "PSR_M_I,PSR_M Instructions Support" "Not supported,?..."
bitfld.long 0x00 20.--23. "SPRI,Synchronization Primitive instructions" "Supported,?..."
newline
bitfld.long 0x00 16.--19. "BI,Barrier Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SMCI,SMC Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "WBI,Write-Back Instructions Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 4.--7. "WSI,With-Shift Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "UI,Unprivileged Instructions Support" "Reserved,Reserved,Supported,?..."
rgroup.long c15:0x0520++0x00
line.long 0x00 "ID_ISAR5,Instruction Set Attribute Register 5"
bitfld.long 0x00 16.--19. "CRC32,CRC32 Instructions Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "SHA2,SHA2 Instructions Support" "Not supported,Supported,?..."
bitfld.long 0x00 8.--11. "SHA1,SHA1 Instructions Support" "Not supported,Supported,?..."
newline
bitfld.long 0x00 4.--7. "AES,AES Instructions Support" "Not supported,Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "SEVL,SEVL Instructions Support" "Reserved,Supported,?..."
rgroup.long c15:0x0010++0x00
line.long 0x00 "ID_PFR0,Processor Feature Register 0"
bitfld.long 0x00 12.--15. "STATE3,Thumb Execution Environment (Thumb-EE) Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "STATE2,Support for Jazelle extension" "Reserved,Supported,?..."
bitfld.long 0x00 4.--7. "STATE1,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "STATE0,ARM Instruction Set Support" "Reserved,Supported,?..."
rgroup.long c15:0x0110++0x00
line.long 0x00 "ID_PFR1,Processor Feature Register 1"
bitfld.long 0x00 28.--31. "GIC_CPU,GIC CPU Support" "Not supported,Supported,?..."
newline
bitfld.long 0x00 16.--19. "GT,Generic Timer Support" "Reserved,Supported,?..."
bitfld.long 0x00 12.--15. "VE,Virtualization Extensions Support" "Reserved,Supported,?..."
bitfld.long 0x00 8.--11. "MPM,Microcontroller Programmer's Model Support" "Not supported,?..."
newline
bitfld.long 0x00 4.--7. "SE,Security Extensions Architecture v1 Support" "Reserved,Supported,?..."
bitfld.long 0x00 0.--3. "PM,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..."
rgroup.long c15:0x0210++0x00
line.long 0x00 "ID_DFR0,Debug Feature Register 0"
bitfld.long 0x00 24.--27. "PMM,Performance Monitor Model Support" "Reserved,Reserved,Reserved,PMUv3,?..."
bitfld.long 0x00 20.--23. "MDM_MM,Memory-mapped Debug Model for M profile processors Support" "Not supported,?..."
bitfld.long 0x00 16.--19. "TM_MM,Trace Model (Memory-Mapped) Support" "Reserved,Supported,?..."
newline
bitfld.long 0x00 12.--15. "CTM_CB,Coprocessor-Based Trace Debug Model Support" "Not supported,?..."
bitfld.long 0x00 8.--11. "CDM_MM,Memory-Mapped Debug Model Support" "Not supported,?..."
bitfld.long 0x00 4.--7. "SDM_CB,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
newline
bitfld.long 0x00 0.--3. "CDM_CB,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Supported,?..."
newline
rgroup.long c15:0x6C9++0x00
line.long 0x00 "PMCEID0,Common Event Identification Register 0"
bitfld.long 0x00 30. "CH,Chain" "Not implemented,Implemented"
bitfld.long 0x00 29. "BC,Bus cycle" "Not implemented,Implemented"
bitfld.long 0x00 28. "TW,Instruction architecturally executed condition check pass" "Not implemented,Implemented"
newline
bitfld.long 0x00 27. "IS,Instruction speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 26. "ME,Local memory error" "Not implemented,Implemented"
bitfld.long 0x00 25. "BA,Bus access" "Not implemented,Implemented"
newline
bitfld.long 0x00 24. "DC2W,Level 2 data cache write-back" "Not implemented,Implemented"
bitfld.long 0x00 23. "DC2R,Level 2 data cache refill" "Not implemented,Implemented"
bitfld.long 0x00 22. "DC2A,Level 2 data cache access" "Not implemented,Implemented"
newline
bitfld.long 0x00 21. "DC1W,Level 1 data cache write-back" "Not implemented,Implemented"
bitfld.long 0x00 20. "IC1A,Level 1 instruction cache access" "Not implemented,Implemented"
bitfld.long 0x00 19. "MA,Data memory access" "Not implemented,Implemented"
newline
bitfld.long 0x00 18. "BP,Predictable branch speculatively executed" "Not implemented,Implemented"
bitfld.long 0x00 17. "CC,Cycle" "Not implemented,Implemented"
bitfld.long 0x00 16. "BM,Mispredicted or not predicted branch speculatively executed" "Not implemented,Implemented"
newline
bitfld.long 0x00 15. "UL,Instruction architecturally executed condition check pass  unaligned load or store" "Not implemented,Implemented"
bitfld.long 0x00 14. "BR,Instruction architecturally executed condition check pass procedure return" "Not implemented,Implemented"
bitfld.long 0x00 13. "BI,Instruction architecturally executed  immediate branch" "Not implemented,Implemented"
newline
bitfld.long 0x00 12. "PW,Instruction architecturally executed condition check pass software change of the PC" "Not implemented,Implemented"
bitfld.long 0x00 11. "CW,Instruction architecturally executed condition check pass write to CONTEXTIDR" "Not implemented,Implemented"
bitfld.long 0x00 10. "ER,Instruction architecturally executed condition check pass exception return" "Not implemented,Implemented"
newline
bitfld.long 0x00 9. "ET,Exception taken" "Not implemented,Implemented"
bitfld.long 0x00 8. "IA,Instruction architecturally executed" "Not implemented,Implemented"
bitfld.long 0x00 7. "ST,Instruction architecturally executed condition check pass  store" "Not implemented,Implemented"
newline
bitfld.long 0x00 6. "LD,Instruction architecturally executed condition check pass  load" "Not implemented,Implemented"
bitfld.long 0x00 5. "DT1R,Level 1 data TLB refill" "Not implemented,Implemented"
bitfld.long 0x00 4. "DC1A,Level 1 data cache access" "Not implemented,Implemented"
newline
bitfld.long 0x00 3. "DC1R,Level 1 data cache refill" "Not implemented,Implemented"
bitfld.long 0x00 2. "IT1R,Level 1 instruction TLB refill" "Not implemented,Implemented"
bitfld.long 0x00 1. "IC1R,Level 1 instruction cache refill" "Not implemented,Implemented"
newline
bitfld.long 0x00 0. "SI,Instruction architecturally executed condition check pass software increment" "Not implemented,Implemented"
group.long c15:0x020D++0x00
line.long 0x00 "TPIDRURW,User Read/Write Thread ID Register"
group.long c15:0x030D++0x00
line.long 0x00 "TPIDRURO,User Read-Only Thread ID Register"
group.long c15:0x040D++0x00
line.long 0x00 "TPIDRPRW,EL1 only Thread ID Register"
group.long c15:0x420D++0x00
line.long 0x00 "HTPIDR,Hypervisor Software Thread ID Register"
tree.end
tree "System Control and Configuration"
if (((per.l(c15:0x202))&0x80000000)==0x00000000)
group.long c15:0x0001++0x00
line.long 0x00 "SCTLR,Control Register"
bitfld.long 0x00 30. "TE,T32 exception enable" "A32,T32"
bitfld.long 0x00 29. "AFE,Access Flag Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "TRE,TEX remap enable" "Disabled,Enabled"
bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x00 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced"
bitfld.long 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x00 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.long 0x00 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.long 0x00 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000"
bitfld.long 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x00 7. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x00 6. "THEE,ThumbEE Disable" "No,Yes"
bitfld.long 0x00 5. "CP15BEN,CP15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
else
group.long c15:0x0001++0x00
line.long 0x00 "SCTLR,Control Register"
bitfld.long 0x00 30. "TE,T32 exception enable" "A32,T32"
bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x00 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced"
bitfld.long 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x00 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.long 0x00 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.long 0x00 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000"
bitfld.long 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x00 7. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x00 6. "THEE,ThumbEE Disable" "No,Yes"
bitfld.long 0x00 5. "CP15BEN,CP15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "C,Enable unified cache or data cache" "Disabled,Enabled"
bitfld.long 0x00 1. "A,Strict Alignment" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "M,MMU or Protection Unit" "Disabled,Enabled"
endif
group.quad c15:0x100F0++0x01
line.quad 0x00 "CPUACTLR,CPU Auxiliary Control Register"
bitfld.quad 0x00 63. "FPMRCGEA,Force processor RCG enables active" "Not forced,Forced"
bitfld.quad 0x00 62. "FPNMRCGEA,Force processor non-memory-system RCG enables active" "Not forced,Forced"
newline
bitfld.quad 0x00 61. "FPDIERCGEA,Force processor Decode and Integer Execute idle RCG enables active" "Not forced,Forced"
bitfld.quad 0x00 60. "FPDRCGEA,Force processor Dispatch idle RCG enables active" "Not forced,Forced"
newline
bitfld.quad 0x00 59. "DLPDMB,Disable load pass DMB" "No,Yes"
bitfld.quad 0x00 58. "DDMBN,Disable DMB nullification" "No,Yes"
newline
bitfld.quad 0x00 57. "TA,Treat DMB st/st and DMB ld/allas DMB all/all" "Disabled,Enabled"
bitfld.quad 0x00 56. "DL1DCHP,Disable L1 Data Cache hardware prefetcher" "No,Yes"
newline
bitfld.quad 0x00 55. "DLPS,Disable load pass store" "No,Yes"
bitfld.quad 0x00 54. "TGRE,Treat GRE/nGRE as nGnRE" "Disabled,Enabled"
newline
bitfld.quad 0x00 53. "TDMBADSB,Treat DMBand DSBas if their domain field is SY" "Disabled,Enabled"
bitfld.quad 0x00 52. "DORFLDNPI,Disable over-read from LDNP instruction" "No,Yes"
newline
bitfld.quad 0x00 51. "ECDAFEMP,Enable contention detection and fast exclusive monitor path" "Disabled,Enabled"
bitfld.quad 0x00 50. "DSSONNCGREEMT,Disable store streaming on NC/GRE memory type" "No,Yes"
newline
bitfld.quad 0x00 49. "DNHOWBNAMT,Disable non-allocate hint of Write-Back No-Allocate (WBNA) memory type" "No,Yes"
bitfld.quad 0x00 48. "DESRAFLSTL2,Disable early speculative read access from LS to L2" "No,Yes"
newline
bitfld.quad 0x00 47. "DL1L2HP,Disable L1/L2 hardware prefetch across 4KB page boundary even if page is 64KB or larger" "No,Yes"
bitfld.quad 0x00 46. "DML1DTLBM,Disable multiple outstanding L1 Data TLB misses and L2 TLB hit under miss" "No,Yes"
newline
bitfld.quad 0x00 45. "Dl1DCWT,Disable L1-DCache way tracker" "No,Yes"
bitfld.quad 0x00 44. "EDCCADCCI,Enable data cache clean as data cache clean/invalidate" "Disabled,Enabled"
newline
bitfld.quad 0x00 43. "DVABHWPREF,Disable the Load/Store hardware prefetcher from using VA to cross page boundaries" "No,Yes"
bitfld.quad 0x00 42. "DPREFREQRUT,Disable prefetch requests from ReadUnique transactions" "No,Yes"
newline
bitfld.quad 0x00 41. "ESHWSHAEP,Enable snoop hazard while waiting for second half of atomic exclusive pair" "Disabled,Enabled"
bitfld.quad 0x00 39. "DIM,Disable instruction merging" "No,Yes"
newline
bitfld.quad 0x00 38. "FFPSCRWF,Force FPSCR write flush" "Not forced,Forced"
bitfld.quad 0x00 37. "DIGS,Disable instruction group split" "No,Yes"
newline
bitfld.quad 0x00 36. "FIDSBONASBE,Force implicit DSB on an ISB event" "Not forced,Forced"
bitfld.quad 0x00 34. "DSBP,Disable Static Branch Predictor" "No,Yes"
newline
bitfld.quad 0x00 33. "DL1ICWPIMBTB,Disable L1 Instruction Cache way prediction in micro-BTB" "No,Yes"
bitfld.quad 0x00 32. "DL1ICP,Disable L1 Instruction Cache prefetch" "No,Yes"
newline
bitfld.quad 0x00 31. "SDEH,Snoop-delayed exclusive handling" "Disabled,Enabled"
bitfld.quad 0x00 30. "FMCEA,Force main clock enable active" "Not forced,Forced"
newline
bitfld.quad 0x00 29. "FASIMDFPCEA,Force Advanced SIMD and floating-point clock enable active" "Disabled,Enabled"
bitfld.quad 0x00 27.--28. "WSNAT,Write streaming no-allocate threshold" "12th,128th,512th,Disabled"
newline
bitfld.quad 0x00 25.--26. "WSNL1AT,Write streaming no-L1-allocate threshold" "4th,64th,128th,Disabled"
bitfld.quad 0x00 24. "NCSE,Non-cacheable streaming enhancement" "Disabled,Enabled"
newline
bitfld.quad 0x00 23. "FIORTTSSAW,Force in-order requests to the same set and way" "Not forced,Forced"
bitfld.quad 0x00 22. "FIOLI,Force in-order load issue" "Not forced,Forced"
newline
bitfld.quad 0x00 21. "DL2TLBP,Disable L2 TLB prefetching" "No,Yes"
bitfld.quad 0x00 20. "DL2TTWIPAPAC,Disable L2 translation table walk IPA PA cache" "No,Yes"
newline
bitfld.quad 0x00 19. "DL2S1TTWC,Disable L2 stage 1 translation table walk cache" "No,Yes"
bitfld.quad 0x00 18. "DL2S1TTWL2PAC,Disable L2 stage 1 translation table walk L2 PA cache" "No,Yes"
newline
bitfld.quad 0x00 17. "DL2TLBPO,Disable L2 TLB performance optimization" "No,Yes"
bitfld.quad 0x00 16. "EFSOADLR,Enable full Strongly-ordered and Device load replay" "Disabled,Enabled"
newline
bitfld.quad 0x00 15. "FIOIIBEU,Force in-order issue in branch execute unit" "Not forced,Forced"
bitfld.quad 0x00 14. "FLOFOIGCDAPC,Force limit of one instruction group commit/de-allocate per cycle" "Not forced,Forced"
newline
bitfld.quad 0x00 13. "FASPRW,Flush after Special Purpose Register (SPR) writes" "Disabled,Enabled"
bitfld.quad 0x00 12. "FPOSPRS,Force push of SPRs" "Disabled,Enabled"
newline
bitfld.quad 0x00 11. "LTOIPIG,Limit to one instruction per instruction group" "Disabled,Enabled"
bitfld.quad 0x00 10. "FSAEIG,Force serialization after each instruction group" "Not forced,Forced"
newline
bitfld.quad 0x00 9. "DFRO,Disable flag renaming optimization" "No,Yes"
bitfld.quad 0x00 8. "EWFIIAANOPI,Execute WFI instruction as a NOP instruction" "Disabled,Enabled"
newline
bitfld.quad 0x00 7. "EWFEIAANOPI,Execute WFE instruction as a NOP instruction" "Disabled,Enabled"
bitfld.quad 0x00 5. "EPLDPLDWIASNOP,Execute PLDand PLDWinstructions as a NOP" "Disabled,Enabled"
newline
bitfld.quad 0x00 4. "DIP,Disable indirect predictor" "No,Yes"
bitfld.quad 0x00 3. "DMBTB,Disable micro-BTB" "No,Yes"
newline
bitfld.quad 0x00 1. "DICMS,Disable Instruction Cache miss streaming" "No,Yes"
bitfld.quad 0x00 0. "EIOBTB,Enable invalidates of BTB" "Disabled,Enabled"
group.quad c15:0x110F0++0x01
line.quad 0x00 "CPUECTLR,CPU Extended Control Register"
bitfld.quad 0x00 38. "DTWDAP,Disable table walk descriptor access prefetch" "No,Yes"
bitfld.quad 0x00 35.--36. "L2IFPD,L2 instruction fetch prefetch distance" "0 requests,1 request,2 requests,3 requests"
newline
bitfld.quad 0x00 32.--33. "L2LSDPD,L2 load/store data prefetch distance" "16 requests,18 requests,20 requests,22 requests"
bitfld.quad 0x00 6. "SMPEN,Enables the processor to receive instruction cache and TLB maintenance operations broadcast from other processors in the cluster" "Disabled,Enabled"
newline
bitfld.quad 0x00 0.--2. "CPURETCTL,CPU retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.quad c15:0x120F0++0x01
line.quad 0x00 "CPUMERRSR,CPU Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
newline
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
newline
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--22. "B/W,Bank/Way" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
hexmask.quad.tbyte 0x00 0.--17. 1. "INDEX,Indicates the index address of the first memory error"
group.long c15:0x0101++0x00
line.long 0x00 "ACTLR,Auxiliary Control Register"
group.long c15:0x0201++0x00
line.long 0x00 "CPACR,Coprocessor Access Control Register"
bitfld.long 0x00 31. "ASEDIS,Disable Advanced SIMD Extension functionality" "No,Yes"
bitfld.long 0x00 28. "TRCDIS,Disable CP14 access to trace registers" "No,"
newline
bitfld.long 0x00 22.--23. "CP11,Coprocesor access control" "Denied,EL1 or higher,Reserved,Full"
bitfld.long 0x00 20.--21. "CP10,Coprocessor access control" "Denied,EL1 or higher,Reserved,Full"
group.long c15:0x0011++0x00
line.long 0x00 "SCR,Secure Configuration Register"
bitfld.long 0x00 13. "TWE,Trap WFE Instructions" "Not trapped,Trapped"
bitfld.long 0x00 12. "TWI,Trap WFI Instructions" "Not trapped,Trapped"
newline
bitfld.long 0x00 9. "SIF,Secure Instruction Fetch" "Permitted,Not permitted"
bitfld.long 0x00 8. "HCE,Hypervisor Call enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "SCD,Secure Monitor Call disable" "No,Yes"
bitfld.long 0x00 5. "AW,Controls whether the Non-secure world can modify the A-bit in the CPSR" "Not allowed,Allowed"
newline
bitfld.long 0x00 4. "FW,Controls whether the Non-secure world can modify the F-bit in the CPSR" "Not allowed,Allowed"
bitfld.long 0x00 3. "EA,External Abort exceptions handled in Abort mode or Monitor mode" "Abort,Monitor"
newline
bitfld.long 0x00 2. "FIQ,FIQ exceptions handled in Abort mode or Monitor mode" "FIQ,Monitor"
bitfld.long 0x00 1. "IRQ,IRQ exceptions handled in Abort mode or Monitor mode" "IRQ,Monitor"
newline
bitfld.long 0x00 0. "NS,Secure mode " "Secure,Non-secure"
group.long c15:0x0111++0x00
line.long 0x00 "SDER,Secure Debug Enable Register"
bitfld.long 0x00 1. "SUNIDEN,Non-Invasive Secure User Debug Enable bit" "Denied,Permitted"
bitfld.long 0x00 0. "SUIDEN,Invasive Secure User Debug Enable bit" "Denied,Permitted"
group.long c15:0x0131++0x00
line.long 0x00 "SDCR,Secure Debug Control Register"
bitfld.long 0x00 21. "EPMAD,External debugger access to Performance Monitors registers disabled" "No,Yes"
bitfld.long 0x00 20. "EDAD,External debugger access to breakpoint and watchpoint registers disabled" "No,Yes"
newline
bitfld.long 0x00 17. "SPME,Secure performance monitors enable" "Disabled,Enabled"
bitfld.long 0x00 14.--15. "SPD,AArch32 secure privileged debug" "Legacy,Reserved,Disabled,Enabled"
group.long c15:0x0211++0x00
line.long 0x00 "NSACR,Non-Secure Access Control Register"
bitfld.long 0x00 15. "NSASEDIS,Disable Non-secure Advanced SIMD Extension functionality" "No,Yes"
bitfld.long 0x00 11. "CP11,Coprocessor 11 in the Non-secure World Access Permission" "Denied,Permitted"
newline
bitfld.long 0x00 10. "CP10,Coprocessor 10 in the Non-secure World Access Permission" "Denied,Permitted"
group.long c15:0x000C++0x00
line.long 0x00 "VBAR,Vector Base Address Register"
hexmask.long 0x00 5.--31. 0x20 "VBA,Vector Base Address"
group.long c15:0x010C++0x00
line.long 0x00 "MVBAR,Monitor Vector Base Address Register"
hexmask.long 0x00 5.--31. 0x20 "VBA,Vector Base Address"
rgroup.long c15:0x001C++0x00
line.long 0x00 "ISR,Interrupt Status Register"
bitfld.long 0x00 8. "A,External abort pending flag" "Not pending,Pending"
bitfld.long 0x00 7. "I,Interrupt pending flag" "Not pending,Pending"
newline
bitfld.long 0x00 6. "F,Fast interrupt pending flag" "Not pending,Pending"
group.long c15:0x020C++0x00
line.long 0x00 "RMR,Reset Management Register"
bitfld.long 0x00 1. "RR,Reset Request" "Not requested,Requested"
bitfld.long 0x00 0. "AA64,Determines which execution state the processor boots into after a warm reset" "AArch32,AArch64"
rgroup.long c15:0x0015++0x00
line.long 0x00 "ADFSR,Auxiliary Data Fault Status Register"
rgroup.long c15:0x0115++0x00
line.long 0x00 "AIFSR,Auxiliary Instruction Fault Status Register"
if (((per.l(c15:0x202))&0x80000000)==0x80000000)
group.long c15:0x0005++0x00
line.long 0x00 "DFSR,Data Fault Status Register"
bitfld.long 0x00 15. "UA,Unattributable fault" "Attributable,Unattributable"
bitfld.long 0x00 14. "UC,Uncontainable fault" "Containable,Uncontainable"
newline
bitfld.long 0x00 13. "CM,Cache maintenance fault" "Not aborted,Aborted"
bitfld.long 0x00 12. "EXT,External Abort Qualifier" "DECERR,SLVERR"
newline
bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write"
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--5. "STATUS,Fault Status bits" "Address size/0th level,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Access flag/0th level,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Permission/0th level,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Sync. external/on TTW/0th level,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/0th level,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,?..."
else
group.long c15:0x0005++0x00
line.long 0x00 "DFSR,Data Fault Status Register"
bitfld.long 0x00 15. "UA,Unattributable fault" "Attributable,Unattributable"
bitfld.long 0x00 14. "UC,Uncontainable fault" "Containable,Uncontainable"
newline
bitfld.long 0x00 13. "CM,Cache maintenance fault" "Not aborted,Aborted"
bitfld.long 0x00 12. "EXT,External Abort Qualifier" "DECERR,SLVERR"
newline
bitfld.long 0x00 11. "WNR,Access Caused an Abort Type" "Read,Write"
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--7. "DOMAIN,Domain Accessed When a Data Fault Occurs" "D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15"
bitfld.long 0x00 0.--3. 10. "FS[3:0],Fault Status bits" "Reserved,Alignment,Debug event,Access flag/1st level,Reserved,Translation/1st level,Access flag/2nd level,Translation/2nd level,Sync. external/non-translation,Domain/1st level,Reserved,Domain/2nd level,Sync. external/on TTW/1st level,Permission/1st level,Sync. external/on TTW/2nd level,Permission/2nd level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async. external,Reserved,Async. parity/on memory access,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/1st level,Reserved,Sync. parity/on TTW/2nd level,?..."
endif
if (((per.l(c15:0x202))&0x80000000)==0x80000000)
group.long c15:0x0105++0x00
line.long 0x00 "IFSR,Instruction Fault Status Register"
bitfld.long 0x00 12. "EXT,External abort type" "DECERR,SLVERR"
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Short,Long"
newline
bitfld.long 0x00 0.--5. "STATUS,Fault Status bits" "Address size/0th level,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Access flag/0th level,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Permission/0th level,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external,Reserved,Reserved,Reserved,Sync. external/on TTW/0th level,Sync. external/on TTW/1st level,Sync. external/on TTW/2nd level,Sync. external/on TTW/3rd level,Sync. parity,Reserved,Reserved,Reserved,Sync. parity/on memory access/on TTW/0th level,Sync. parity/on memory access/on TTW/1st level,Sync. parity/on memory access/on TTW/2nd level,Sync. parity/on memory access/on TTW/3rd level,Reserved,Alignment,Debug event,?..."
else
group.long c15:0x0105++0x00
line.long 0x00 "IFSR,Instruction Fault Status Register"
bitfld.long 0x00 12. "EXT,External Abort Type" "DECERR,SLVERR"
bitfld.long 0x00 9. "LPAE,Large physical address extension" "Short,Long"
newline
bitfld.long 0x00 0.--3. 10. "FS[3:0],Fault Status bits" "Reserved,Alignment,Debug event,Access flag/1st level,Reserved,Translation/1st level,Access flag/2nd level,Translation/2nd level,Sync. external/non-translation,Domain/1st level,Reserved,Domain/2nd level,Sync. external/on TTW/1st level,Permission/1st level,Sync. external/on TTW/2nd level,Permission/2nd level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async. external,Reserved,Async. parity/on memory access,Sync. parity/on memory access,Reserved,Reserved,Sync. parity/on TTW/1st level,Reserved,Sync. parity/on TTW/2nd level,?..."
endif
group.long c15:0x0006++0x00
line.long 0x00 "DFAR,Data Fault Address Register"
group.long c15:0x0206++0x00
line.long 0x00 "IFAR,Instruction Fault Address Register"
rgroup.long c15:0x103F++0x00
line.long 0x00 "CBAR,Configuration Base Address Register"
hexmask.long.word 0x00 18.--31. 1. "PERIPHBASE[31:18],Periphbase[31:18]"
hexmask.long.word 0x00 0.--11. 1. "PERIPHBASE[43:32],Periphbase[43:32]"
group.long c15:0x020D++0x00
line.long 0x00 "TPIDRURW,PL0 Read/Write Software Thread ID Register"
group.long c15:0x030D++0x00
line.long 0x00 "TPIDRURO,PL0 Read-Only Software Thread ID Register"
group.long c15:0x040D++0x00
line.long 0x00 "TPIDRPRW,PL1 Software Thread ID Register"
tree.end
tree "Memory Management Unit"
group.long c15:0x0001++0x00
line.long 0x00 "SCTLR,Control Register"
bitfld.long 0x00 30. "TE,T32 exception enable" "A32,T32"
bitfld.long 0x00 29. "AFE,Access Flag Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "TRE,TEX remap enable" "Disabled,Enabled"
bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x00 20. "UWXN,Unprivileged write permission implies PL1 Execute Never" "Not forced,Forced"
bitfld.long 0x00 19. "WXN,Write permission implies PL1 Execute Never" "Not forced,Forced"
newline
bitfld.long 0x00 18. "NTWE,Not trap WFE" "No,Yes"
bitfld.long 0x00 16. "NTWI,Not trap WFI" "No,Yes"
newline
bitfld.long 0x00 13. "V,Base Location of Exception Registers" "0x00000000,0xFFFF0000"
bitfld.long 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x00 7. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x00 6. "THEE,ThumbEE Enable" "Not implemented,"
bitfld.long 0x00 5. "CP15BEN,CP15 barrier enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "C,Cache enable" "Disabled,Enabled"
bitfld.long 0x00 1. "A,Alignment check enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "M,MMU enable" "Disabled,Enabled"
group.long c15:0x4001++0x00
line.long 0x00 "HSCTLR,Hypervisor System Control Register"
bitfld.long 0x00 30. "TE,Thumb exception enable" "ARM,Thumb"
bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x00 19. "WXN,Write permission implies XN" "Not forced,Forced"
bitfld.long 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x00 7. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x00 5. "CP15BEN,AArch32 CP15 barrier enable" "Disabled,Enabled"
bitfld.long 0x00 2. "C,Cache enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "A,Alignment check enable" "Disabled,Enabled"
bitfld.long 0x00 0. "M,MMU enable" "Disabled,Enabled"
if ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0002))&0x02)==0x02))
group.long c15:0x0002++0x00
line.long 0x00 "TTBR0,Translation Table Base Registers"
hexmask.long 0x00 6.--31. 0x40 "TTB0,Translation table base 0 address"
bitfld.long 0x00 5. "NOS,Not outer shareable bit" "Outer,Inner"
newline
bitfld.long 0x00 3.--4. "RGN,Region" "Normal,Outer Write-Back Write-Allocate Cacheable,Outer Write-Through Cacheable,Outer Write-Back no Write-Allocate Cacheable"
bitfld.long 0x00 1. "S,Shareable" "Non-shareable,Shareable"
newline
bitfld.long 0x00 0. "C,Cacheable" "Non-cacheable,Cacheable"
elif ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0002))&0x02)==0x00))
group.long c15:0x0002++0x00
line.long 0x00 "TTBR0,Translation Table Base Registers"
hexmask.long 0x00 6.--31. 0x40 "TTB0,Translation table base 0 address"
bitfld.long 0x00 3.--4. "RGN,Region" "Normal,Outer Write-Back Write-Allocate Cacheable,Outer Write-Through Cacheable,Outer Write-Back no Write-Allocate Cacheable"
newline
bitfld.long 0x00 1. "S,Shareable" "Non-shareable,Shareable"
bitfld.long 0x00 0. "C,Cacheable" "Non-cacheable,Cacheable"
else
group.quad c15:0x10020++0x01
line.quad 0x00 "TTBR0,Translation Table Base Registers"
hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base 0 address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base 0 address"
endif
if ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0102))&0x02)==0x02))
group.long c15:0x0102++0x00
line.long 0x00 "TTBR1,Translation Table Base 1 Registers"
hexmask.long 0x00 6.--31. 0x40 "TTB1,Translation table base 1 address"
bitfld.long 0x00 5. "NOS,Not outer shareable bit" "Outer,Inner"
newline
bitfld.long 0x00 3.--4. "RGN,Region" "Normal,Outer Write-Back Write-Allocate Cacheable,Outer Write-Through Cacheable,Outer Write-Back no Write-Allocate Cacheable"
bitfld.long 0x00 1. "S,Shareable" "Non-shareable,Shareable"
newline
bitfld.long 0x00 0. "C,Cacheable" "Non-cacheable,Cacheable"
elif ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0102))&0x02)==0x00))
group.long c15:0x0102++0x00
line.long 0x00 "TTBR1,Translation Table Base Registers"
hexmask.long 0x00 6.--31. 0x40 "TTB1,Translation table base 1 address"
bitfld.long 0x00 3.--4. "RGN,Region" "Normal,Outer Write-Back Write-Allocate Cacheable,Outer Write-Through Cacheable,Outer Write-Back no Write-Allocate Cacheable"
newline
bitfld.long 0x00 1. "S,Shareable" "Non-shareable,Shareable"
bitfld.long 0x00 0. "C,Cacheable" "Non-cacheable,Cacheable"
else
group.quad c15:0x11020++0x01
line.quad 0x00 "TTBR1,Translation Table Base Registers"
hexmask.quad.byte 0x00 48.--55. 1. "ASID,ASID for the translation table base 0 address"
hexmask.quad 0x00 0.--47. 1. "BADDR,Translation table base 0 address"
endif
if (((per.l(c15:0x0202))&0x80000000)==0x80000000)
group.long c15:0x0202++0x00
line.long 0x00 "TTBCR,Translation Table Base Control Register"
bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit"
bitfld.long 0x00 28.--29. "SH1,Shareability attributes for the memory associated with the translation table walks using TTBR1" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable"
newline
bitfld.long 0x00 26.--27. "ORGN1,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR1" "0,1,2,3"
bitfld.long 0x00 24.--25. "IRGN1,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR1" "0,1,2,3"
newline
bitfld.long 0x00 23. "EPD1,Translation Walk Disable for TTBR1" "No,Yes"
bitfld.long 0x00 22. "A1,Select ASID from TTBR0/TTBR1 ASID field" "TTBR0,TTBR1"
newline
bitfld.long 0x00 16.--18. "T1SZ,The Size offset of the TTBR1 addressed region" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-Shareable,Reserved,Outer Shareable,Inner Shareable"
newline
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "0,1,2,3"
newline
bitfld.long 0x00 7. "EPD0,Translation Walk Disable for TTBR0 region" "No,Yes"
bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7"
else
group.long c15:0x0202++0x00
line.long 0x00 "TTBCR,Translation Table Base Control Register"
bitfld.long 0x00 31. "EAE,Extended Address Enable" "32-bit,40-bit"
bitfld.long 0x00 5. "PD1,Translation table walk disable for translations using TTBR1" "No,Yes"
newline
bitfld.long 0x00 4. "PD0,Translation table walk disable for translations using TTBR0" "No,Yes"
bitfld.long 0x00 0.--2. "N,Width of the base address held in TTBR0" "0,1,2,3,4,5,6,7"
endif
if (((per.l(c15:0x4202))&0x07)==0x00)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 5.--47. 0x20 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x01)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 4.--47. 0x10 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x02)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 12.--47. 0x10 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x03)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 11.--47. 0x8 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x04)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 10.--47. 0x4 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x05)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 9.--47. 0x2 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x06)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 8.--47. 0x1 "BADDR,Translation table base address"
else
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 7.--47. 0x80 "BADDR,Translation table base address"
endif
group.long c15:0x4202++0x00
line.long 0x00 "HTCR,Hypervisor Translation Control Register"
bitfld.long 0x00 12.--13. "SH0,Shareability attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
bitfld.long 0x00 10.--11. "ORGN0,Outer cacheability attribute, Normal memory" "Outer Non-cacheable,Outer Write-Back Write-Allocate Cacheable,Outer Write-Through Cacheable,Outer Write-Back no Write-Allocate Cacheable"
newline
bitfld.long 0x00 8.--9. "IRGN0,  ,Inner cacheability attribute, Normal memory" "Inner Non-cacheable,Inner Write-Back Write-Allocate Cacheable,Inner Write-Through Cacheable,Inner Write-Back no Write-Allocate Cacheable"
hexmask.long.byte 0x00 0.--2. 0x1 "T0SZ, ,Size offset of the memory region addressed by HTTBR"
group.long c15:0x0003++0x00
line.long 0x00 "DACR,Domain Access Control Register"
bitfld.long 0x00 30.--31. "D15,Domain Access 15" "Denied,Client,Reserved,Manager"
bitfld.long 0x00 28.--29. "D14,Domain Access 14" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x00 26.--27. "D13,Domain Access 13" "Denied,Client,Reserved,Manager"
bitfld.long 0x00 24.--25. "D12,Domain Access 12" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x00 22.--23. "D11,Domain Access 11" "Denied,Client,Reserved,Manager"
bitfld.long 0x00 20.--21. "D10,Domain Access 10" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x00 18.--19. "D9,Domain Access 9" "Denied,Client,Reserved,Manager"
bitfld.long 0x00 16.--17. "D8,Domain Access 8" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x00 14.--15. "D7,Domain Access 7" "Denied,Client,Reserved,Manager"
bitfld.long 0x00 12.--13. "D6,Domain Access 6" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x00 10.--11. "D5,Domain Access 5" "Denied,Client,Reserved,Manager"
bitfld.long 0x00 8.--9. "D4,Domain Access 4" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x00 6.--7. "D3,Domain Access 3" "Denied,Client,Reserved,Manager"
bitfld.long 0x00 4.--5. "D2,Domain Access 2" "Denied,Client,Reserved,Manager"
newline
bitfld.long 0x00 2.--3. "D1,Domain Access 1" "Denied,Client,Reserved,Manager"
bitfld.long 0x00 0.--1. "D0,Domain Access 0" "Denied,Client,Reserved,Manager"
if ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0047))&0x1)==0x0))
group.long c15:0x0047++0x00
line.long 0x00 "PAR,Physical Address Register"
hexmask.long.tbyte 0x00 12.--31. 0x10 "PA,Physical Address"
newline
bitfld.long 0x00 11. "LPAE,Descriptor translation table format" "Short,Long"
bitfld.long 0x00 10. "NOS,Not Outer Shareable attribute for the region" "No,Yes"
newline
bitfld.long 0x00 9. "NS,Non-secure" "No,Yes"
bitfld.long 0x00 7. "SH,Shareable attribute for the region" "No,Yes"
newline
bitfld.long 0x00 4.--6. "INNER,Inner memory attributes for the region" "Non-cacheable,Strongly-ordered,Reserved,Device,Reserved,Write-Back/Write-Allocate,Write-Through,Write-Back/No Write-Allocate"
newline
bitfld.long 0x00 2.--3. "OUTER,Outer memory attributes for the region" "Non-cacheable,Write-Back/Write-Allocate,Write-Through/No Write-Allocate,Write-Back/No Write-Allocate"
newline
bitfld.long 0x00 1. "SS,Supersection" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
elif ((((per.l(c15:0x0202))&0x80000000)==0x00000000)&&(((per.l(c15:0x0047))&0x1)==0x1))
group.long c15:0x0047++0x00
line.long 0x00 "PAR,Physical Address Register"
newline
bitfld.long 0x00 11. "LPAE,Descriptor translation table format" "Short,Long"
newline
newline
newline
bitfld.long 0x00 6. "FS[5],Fault status bit - External abort type" "DECERR,SLVERR"
newline
bitfld.long 0x00 1.--5. "FS[0:4],Fault status bit - Fault source" "Reserved,Alignment,Debug event,Access flag/1st level,Reserved,Translation/1st level,Access flag/2nd level,Translation/2nd level,Sync. external abort/non-translation,Domain/1st level,Reserved,Domain/2nd level,Sync. external abort on translation table walk/1st level,Permission/1st level,Sync. external abort on translation table walk/2nd level,Permission/2nd level,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Async. external abort,Reserved,Async. parity error on memory access,Sync. parity error on memory access,Reserved,Reserved,Sync. parity error on translation table walk/1st level,Reserved,Sync. parity error on translation table walk/2nd level,?..."
newline
bitfld.long 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
elif ((((per.l(c15:0x0202))&0x80000000)==0x80000000)&&(((per.l(c15:0x10070))&0x1)==0x0))
group.quad c15:0x10070++0x01
line.quad 0x00 "PAR,Physical Address Register"
hexmask.quad.byte 0x00 56.--63. 1. "ATTR,Memory attributes for the returned PA"
hexmask.quad.long 0x00 12.--39. 0x10 "PA,Physical Address"
newline
bitfld.quad 0x00 11. "LPAE,Descriptor translation table format" "Short,Long"
newline
bitfld.quad 0x00 9. "NS,Non-secure" "No,Yes"
bitfld.quad 0x00 7.--8. "SHA,Shareable attribute" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
newline
newline
newline
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
else
group.quad c15:0x10070++0x01
line.quad 0x00 "PAR,Physical Address Register"
newline
bitfld.quad 0x00 11. "LPAE,Descriptor translation table format" "Short,Long"
newline
bitfld.quad 0x00 9. "FSTAGE,Indicates the translation stage at which the translation aborted" "Stage 1,Stage 2"
bitfld.quad 0x00 8. "S2WLK,Translation aborted because of a stage 2 fault during a stage 1 translation table walk" "No,Yes"
newline
newline
bitfld.quad 0x00 1.--6. "FST,Fault Status Field" "Address/0th level,Address/1st level,Address/2nd level,Address/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Access flag/0th level,Access flag/1st level,Access flag/2nd level,Access flag/3rd level,Permission/0th level,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. ext. abort,Async. external abort,Reserved,Reserved,Sync. ext. abort/0th level,Sync. ext. abort/1st level,Sync. ext. abort/2nd level,Sync. ext. abort/3rd level,Sync. parity error on memory access,Async. parity error on memory access,Reserved,Reserved,Reserved,Sync. parity error on translation table walk/0th level,Sync. parity error on translation table walk/1st level,Sync. parity error on translation table walk/2nd level,Sync. parity error on translation table walk/3rd level,Reserved,Alignment,Debug event,?..."
newline
newline
bitfld.quad 0x00 0. "F,Indicates whether the conversion completed successfully" "Successful,Aborted"
endif
tree.open "Memory Attribute Indirection Registers"
if ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x002A))&0xF00000)==0x000000)&&(((per.l(c15:0x002A))&0xF000)==0x0000)&&(((per.l(c15:0x002A))&0xF0)==0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x002A))&0xF00000)==0x000000)&&(((per.l(c15:0x002A))&0xF000)==0x0000)&&(((per.l(c15:0x002A))&0xF0)==0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x002A))&0xF00000)!=0x000000)&&(((per.l(c15:0x002A))&0xF000)==0x0000)&&(((per.l(c15:0x002A))&0xF0)==0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x002A))&0xF00000)==0x000000)&&(((per.l(c15:0x002A))&0xF000)!=0x0000)&&(((per.l(c15:0x002A))&0xF0)==0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x002A))&0xF00000)==0x000000)&&(((per.l(c15:0x002A))&0xF000)==0x0000)&&(((per.l(c15:0x002A))&0xF0)!=0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x002A))&0xF00000)!=0x000000)&&(((per.l(c15:0x002A))&0xF000)==0x0000)&&(((per.l(c15:0x002A))&0xF0)==0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x002A))&0xF00000)==0x000000)&&(((per.l(c15:0x002A))&0xF000)!=0x0000)&&(((per.l(c15:0x002A))&0xF0)==0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x002A))&0xF00000)==0x000000)&&(((per.l(c15:0x002A))&0xF000)==0x0000)&&(((per.l(c15:0x002A))&0xF0)!=0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x002A))&0xF00000)!=0x000000)&&(((per.l(c15:0x002A))&0xF000)!=0x0000)&&(((per.l(c15:0x002A))&0xF0)==0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x002A))&0xF00000)!=0x000000)&&(((per.l(c15:0x002A))&0xF000)==0x0000)&&(((per.l(c15:0x002A))&0xF0)!=0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x002A))&0xF00000)==0x000000)&&(((per.l(c15:0x002A))&0xF000)!=0x0000)&&(((per.l(c15:0x002A))&0xF0)!=0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x002A))&0xF00000)!=0x000000)&&(((per.l(c15:0x002A))&0xF000)!=0x0000)&&(((per.l(c15:0x002A))&0xF0)==0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x002A))&0xF00000)!=0x000000)&&(((per.l(c15:0x002A))&0xF000)==0x0000)&&(((per.l(c15:0x002A))&0xF0)!=0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x002A))&0xF00000)==0x000000)&&(((per.l(c15:0x002A))&0xF000)!=0x0000)&&(((per.l(c15:0x002A))&0xF0)!=0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x002A))&0xF00000)!=0x000000)&&(((per.l(c15:0x002A))&0xF000)!=0x0000)&&(((per.l(c15:0x002A))&0xF0)!=0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x002A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x002A))&0xF00000)!=0x000000)&&(((per.l(c15:0x002A))&0xF000)!=0x0000)&&(((per.l(c15:0x002A))&0xF0)!=0x00))
group.long c15:0x002A++0x00
line.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
else
hgroup.long c15:0x002A++0x00
hide.long 0x00 "MAIR0,Memory Attribute Indirection Register 0"
endif
if ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x012A))&0xF00000)==0x000000)&&(((per.l(c15:0x012A))&0xF000)==0x0000)&&(((per.l(c15:0x012A))&0xF0)==0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x012A))&0xF00000)==0x000000)&&(((per.l(c15:0x012A))&0xF000)==0x0000)&&(((per.l(c15:0x012A))&0xF0)==0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x012A))&0xF00000)!=0x000000)&&(((per.l(c15:0x012A))&0xF000)==0x0000)&&(((per.l(c15:0x012A))&0xF0)==0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x012A))&0xF00000)==0x000000)&&(((per.l(c15:0x012A))&0xF000)!=0x0000)&&(((per.l(c15:0x012A))&0xF0)==0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x012A))&0xF00000)==0x000000)&&(((per.l(c15:0x012A))&0xF000)==0x0000)&&(((per.l(c15:0x012A))&0xF0)!=0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x012A))&0xF00000)!=0x000000)&&(((per.l(c15:0x012A))&0xF000)==0x0000)&&(((per.l(c15:0x012A))&0xF0)==0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x012A))&0xF00000)==0x000000)&&(((per.l(c15:0x012A))&0xF000)!=0x0000)&&(((per.l(c15:0x012A))&0xF0)==0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x012A))&0xF00000)==0x000000)&&(((per.l(c15:0x012A))&0xF000)==0x0000)&&(((per.l(c15:0x012A))&0xF0)!=0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x012A))&0xF00000)!=0x000000)&&(((per.l(c15:0x012A))&0xF000)!=0x0000)&&(((per.l(c15:0x012A))&0xF0)==0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x012A))&0xF00000)!=0x000000)&&(((per.l(c15:0x012A))&0xF000)==0x0000)&&(((per.l(c15:0x012A))&0xF0)!=0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x012A))&0xF00000)==0x000000)&&(((per.l(c15:0x012A))&0xF000)!=0x0000)&&(((per.l(c15:0x012A))&0xF0)!=0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x012A))&0xF00000)!=0x000000)&&(((per.l(c15:0x012A))&0xF000)!=0x0000)&&(((per.l(c15:0x012A))&0xF0)==0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x012A))&0xF00000)!=0x000000)&&(((per.l(c15:0x012A))&0xF000)==0x0000)&&(((per.l(c15:0x012A))&0xF0)!=0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x012A))&0xF00000)==0x000000)&&(((per.l(c15:0x012A))&0xF000)!=0x0000)&&(((per.l(c15:0x012A))&0xF0)!=0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x012A))&0xF00000)!=0x000000)&&(((per.l(c15:0x012A))&0xF000)!=0x0000)&&(((per.l(c15:0x012A))&0xF0)!=0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x012A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x012A))&0xF00000)!=0x000000)&&(((per.l(c15:0x012A))&0xF000)!=0x0000)&&(((per.l(c15:0x012A))&0xF0)!=0x00))
group.long c15:0x012A++0x00
line.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
else
hgroup.long c15:0x012A++0x00
hide.long 0x00 "MAIR1,Memory Attribute Indirection Register 1"
endif
if ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x402A))&0xF00000)==0x000000)&&(((per.l(c15:0x402A))&0xF000)==0x0000)&&(((per.l(c15:0x402A))&0xF0)==0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x402A))&0xF00000)==0x000000)&&(((per.l(c15:0x402A))&0xF000)==0x0000)&&(((per.l(c15:0x402A))&0xF0)==0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x402A))&0xF00000)!=0x000000)&&(((per.l(c15:0x402A))&0xF000)==0x0000)&&(((per.l(c15:0x402A))&0xF0)==0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x402A))&0xF00000)==0x000000)&&(((per.l(c15:0x402A))&0xF000)!=0x0000)&&(((per.l(c15:0x402A))&0xF0)==0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x402A))&0xF00000)==0x000000)&&(((per.l(c15:0x402A))&0xF000)==0x0000)&&(((per.l(c15:0x402A))&0xF0)!=0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x402A))&0xF00000)!=0x000000)&&(((per.l(c15:0x402A))&0xF000)==0x0000)&&(((per.l(c15:0x402A))&0xF0)==0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x402A))&0xF00000)==0x000000)&&(((per.l(c15:0x402A))&0xF000)!=0x0000)&&(((per.l(c15:0x402A))&0xF0)==0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x402A))&0xF00000)==0x000000)&&(((per.l(c15:0x402A))&0xF000)==0x0000)&&(((per.l(c15:0x402A))&0xF0)!=0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x402A))&0xF00000)!=0x000000)&&(((per.l(c15:0x402A))&0xF000)!=0x0000)&&(((per.l(c15:0x402A))&0xF0)==0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x402A))&0xF00000)!=0x000000)&&(((per.l(c15:0x402A))&0xF000)==0x0000)&&(((per.l(c15:0x402A))&0xF0)!=0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x402A))&0xF00000)==0x000000)&&(((per.l(c15:0x402A))&0xF000)!=0x0000)&&(((per.l(c15:0x402A))&0xF0)!=0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x402A))&0xF00000)!=0x000000)&&(((per.l(c15:0x402A))&0xF000)!=0x0000)&&(((per.l(c15:0x402A))&0xF0)==0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x402A))&0xF00000)!=0x000000)&&(((per.l(c15:0x402A))&0xF000)==0x0000)&&(((per.l(c15:0x402A))&0xF0)!=0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x402A))&0xF00000)==0x000000)&&(((per.l(c15:0x402A))&0xF000)!=0x0000)&&(((per.l(c15:0x402A))&0xF0)!=0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x402A))&0xF00000)!=0x000000)&&(((per.l(c15:0x402A))&0xF000)!=0x0000)&&(((per.l(c15:0x402A))&0xF0)!=0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x402A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x402A))&0xF00000)!=0x000000)&&(((per.l(c15:0x402A))&0xF000)!=0x0000)&&(((per.l(c15:0x402A))&0xF0)!=0x00))
group.long c15:0x402A++0x00
line.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
else
hgroup.long c15:0x402A++0x00
hide.long 0x00 "HMAIR0,Hypervisor Memory Attribute Indirection Register 0"
endif
if ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x412A))&0xF00000)==0x000000)&&(((per.l(c15:0x412A))&0xF000)==0x0000)&&(((per.l(c15:0x412A))&0xF0)==0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x412A))&0xF00000)==0x000000)&&(((per.l(c15:0x412A))&0xF000)==0x0000)&&(((per.l(c15:0x412A))&0xF0)==0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x412A))&0xF00000)!=0x000000)&&(((per.l(c15:0x412A))&0xF000)==0x0000)&&(((per.l(c15:0x412A))&0xF0)==0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x412A))&0xF00000)==0x000000)&&(((per.l(c15:0x412A))&0xF000)!=0x0000)&&(((per.l(c15:0x412A))&0xF0)==0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x412A))&0xF00000)==0x000000)&&(((per.l(c15:0x412A))&0xF000)==0x0000)&&(((per.l(c15:0x412A))&0xF0)!=0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x412A))&0xF00000)!=0x000000)&&(((per.l(c15:0x412A))&0xF000)==0x0000)&&(((per.l(c15:0x412A))&0xF0)==0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x412A))&0xF00000)==0x000000)&&(((per.l(c15:0x412A))&0xF000)!=0x0000)&&(((per.l(c15:0x412A))&0xF0)==0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x412A))&0xF00000)==0x000000)&&(((per.l(c15:0x412A))&0xF000)==0x0000)&&(((per.l(c15:0x412A))&0xF0)!=0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x412A))&0xF00000)!=0x000000)&&(((per.l(c15:0x412A))&0xF000)!=0x0000)&&(((per.l(c15:0x412A))&0xF0)==0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x412A))&0xF00000)!=0x000000)&&(((per.l(c15:0x412A))&0xF000)==0x0000)&&(((per.l(c15:0x412A))&0xF0)!=0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x412A))&0xF00000)==0x000000)&&(((per.l(c15:0x412A))&0xF000)!=0x0000)&&(((per.l(c15:0x412A))&0xF0)!=0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x412A))&0xF00000)!=0x000000)&&(((per.l(c15:0x412A))&0xF000)!=0x0000)&&(((per.l(c15:0x412A))&0xF0)==0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x412A))&0xF00000)!=0x000000)&&(((per.l(c15:0x412A))&0xF000)==0x0000)&&(((per.l(c15:0x412A))&0xF0)!=0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x412A))&0xF00000)==0x000000)&&(((per.l(c15:0x412A))&0xF000)!=0x0000)&&(((per.l(c15:0x412A))&0xF0)!=0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)==0x00000000)&&(((per.l(c15:0x412A))&0xF00000)!=0x000000)&&(((per.l(c15:0x412A))&0xF000)!=0x0000)&&(((per.l(c15:0x412A))&0xF0)!=0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "nGnRnE,,,,nGnRE,,,,nGRE,,,,GRE,?..."
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
elif ((((per.l(c15:0x0202))&0x80000000)==0x0x80000000)&&(((per.l(c15:0x412A))&0xF0000000)!=0x00000000)&&(((per.l(c15:0x412A))&0xF00000)!=0x000000)&&(((per.l(c15:0x412A))&0xF000)!=0x0000)&&(((per.l(c15:0x412A))&0xF0)!=0x00))
group.long c15:0x412A++0x00
line.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
bitfld.long 0x00 28.--31. "ATTR3[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 24.--27. "ATTR3[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 20.--23. "ATTR2[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 16.--19. "ATTR2[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 12.--15. "ATTR1[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 8.--11. "ATTR1[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
newline
bitfld.long 0x00 4.--7. "ATTR0[7:4],The memory attribute encoding for an AttrIndx[2:0] bits [7:4]" "Device,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Write-through transient,Normal/Outer Non-Cacheable,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-back transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-through non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient,Normal/Outer Write-back non-transient"
bitfld.long 0x00 0.--3. "ATTR0[3:0],The memory attribute encoding for an AttrIndx[2:0] bits [3:0]" "Device,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Write-through transient,Normal/Inner Non-Cacheable,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-back transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-through non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient,Normal/Inner Write-back non-transient"
else
hgroup.long c15:0x412A++0x00
hide.long 0x00 "HMAIR1,Hypervisor Memory Attribute Indirection Register 1"
endif
if (((per.l(c15:0x202))&0x80000000)==0x00000000)
group.long c15:0x002A++0x00
line.long 0x00 "PRRR,Primary Region Remap Register"
bitfld.long 0x00 31. "NOS7,Outer Shareable property mapping for memory attributes" "Outer,Inner"
bitfld.long 0x00 30. "NOS6,Outer Shareable property mapping for memory attributes" "Outer,Inner"
newline
bitfld.long 0x00 29. "NOS5,Outer Shareable property mapping for memory attributes" "Outer,Inner"
bitfld.long 0x00 28. "NOS4,Outer Shareable property mapping for memory attributes" "Outer,Inner"
newline
bitfld.long 0x00 27. "NOS3,Outer Shareable property mapping for memory attributes" "Outer,Inner"
bitfld.long 0x00 26. "NOS2,Outer Shareable property mapping for memory attributes" "Outer,Inner"
newline
bitfld.long 0x00 25. "NOS1,Outer Shareable property mapping for memory attributes" "Outer,Inner"
bitfld.long 0x00 24. "NOS0,Outer Shareable property mapping for memory attributes" "Outer,Inner"
newline
bitfld.long 0x00 19. "NS1,Mapping of S = 1 attribute for Normal memory" "Non-shareable,Shareable"
bitfld.long 0x00 18. "NS0,Mapping of S = 0 attribute for Normal memory" "Non-shareable,Shareable"
newline
bitfld.long 0x00 17. "DS1,Mapping of S = 1 attribute for Device memory" "Non-shareable,Shareable"
bitfld.long 0x00 16. "DS0,Mapping of S = 0 attribute for Device memory" "Non-shareable,Shareable"
newline
bitfld.long 0x00 14.--15. "TR7,{TEX[0] C B} = b111 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
bitfld.long 0x00 12.--13. "TR6,{TEX[0] C B} = b110 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
newline
bitfld.long 0x00 10.--11. "TR5,{TEX[0] C B} = b101 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
bitfld.long 0x00 8.--9. "TR4,{TEX[0] C B} = b100 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
newline
bitfld.long 0x00 6.--7. "TR3,{TEX[0] C B} = b011 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
bitfld.long 0x00 4.--5. "TR2,{TEX[0] C B} = b010 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
newline
bitfld.long 0x00 2.--3. "TR1,{TEX[0] C B} = b001 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
bitfld.long 0x00 0.--1. "TR0,{TEX[0] C B} = b000 Remap" "Device-nGnRnE,Device-nGnRE,Normal,?..."
group.long c15:0x012A++0x00
line.long 0x00 "NMRR,Normal Memory Remap Register"
bitfld.long 0x00 30.--31. "OR7,Outer Attribute for {TEX[0] C B} = b111 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 28.--29. "OR6,Outer Attribute for {TEX[0] C B} = b110 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 26.--27. "OR5,Outer Attribute for {TEX[0] C B} = b101 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 24.--25. "OR4,Outer Attribute for {TEX[0] C B} = b100 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 22.--23. "OR3,Outer Attribute for {TEX[0] C B} = b011 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 20.--21. "OR2,Outer Attribute for {TEX[0] C B} = b010 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 18.--19. "OR1,Outer Attribute for {TEX[0] C B} = b001 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 16.--17. "OR0,Outer Attribute for {TEX[0] C B} = b000 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 14.--15. "IR7,Inner attribute for {TEX[0] C B} = b111 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 12.--13. "IR6,Inner attribute for {TEX[0] C B} = b110 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 10.--11. "IR5,Inner attribute for {TEX[0] C B} = b101 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 8.--9. "IR4,Inner attribute for {TEX[0] C B} = b100 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 6.--7. "IR3,Inner attribute for {TEX[0] C B} = b011 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 4.--5. "IR2,Inner attribute for {TEX[0] C B} = b010 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
bitfld.long 0x00 2.--3. "IR1,Inner attribute for {TEX[0] C B} = b001 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
bitfld.long 0x00 0.--1. "IR0,Inner attribute for {TEX[0] C B} = b000 Remap" "Non-cacheable,Write-back allocate,Write-through,Write-back no allocate"
newline
group.long c15:0x10d++0x00
line.long 0x00 "CONTEXTIDR,Context ID Register"
hexmask.long.tbyte 0x00 8.--31. 1. "PROCID,Process identifier"
hexmask.long.byte 0x00 0.--7. 1. "ASID,Address space identifier"
else
hgroup.long c15:0x002A++0x00
hide.long 0x00 "PRRR,Primary Region Remap Register"
hgroup.long c15:0x012A++0x00
hide.long 0x00 "NMRR,Normal Memory Remap Register"
group.long c15:0x10d++0x00
line.long 0x00 "CONTEXTIDR,Context ID Register"
endif
tree.end
tree.end
tree "Virtualization Extensions"
group.long c15:0x4000++0x00
line.long 0x00 "VPIDR,Virtualization Processor ID Register"
group.long c15:0x4500++0x00
line.long 0x00 "VMPIDR,Virtualization Multiprocessor ID Register"
group.long c15:0x420D++0x00
line.long 0x00 "HTPIDR,Hypervisor Software Thread ID Register"
group.long c15:0x4001++0x00
line.long 0x00 "HSCTLR,Hypervisor System Control Register"
bitfld.long 0x00 30. "TE,Thumb exception enable" "ARM,Thumb"
bitfld.long 0x00 25. "EE,Exception endianness" "Little,Big"
newline
bitfld.long 0x00 19. "WXN,Write permission implies XN" "Not forced,Forced"
bitfld.long 0x00 12. "I,Instruction Cache Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "SED,SETEND Disable" "No,Yes"
bitfld.long 0x00 7. "ITD,IT Disable" "No,Yes"
newline
bitfld.long 0x00 5. "CP15BEN,AArch32 CP15 barrier enable" "Disabled,Enabled"
bitfld.long 0x00 2. "C,Cache enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "A,Alignment check enable" "Disabled,Enabled"
bitfld.long 0x00 0. "M,MMU enable" "Disabled,Enabled"
group.long c15:0x4101++0x00
line.long 0x00 "HACTLR,Hypervisor Auxiliary Control Register"
bitfld.long 0x00 6. "L2ACTLRAC,L2ACTLR access control" "Disabled,Enabled"
bitfld.long 0x00 5. "L2ECTLRAC,L2ECTLR access control" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "L2CTLRAC,L2CTLR access control" "Disabled,Enabled"
bitfld.long 0x00 1. "CPUECTLRAC,CPUECTLR access control" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "CPUACTLRAC,CPUACTLR access control" "Disabled,Enabled"
group.long c15:0x4011++0x00
line.long 0x00 "HCR,Hypervisor Configuration Register"
bitfld.long 0x00 30. "TRVM,Trap Read of Virtual Memory controls" "Disabled,Enabled"
bitfld.long 0x00 27. "TGE,Trap General Exceptions" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "TVM,Trap Virtual Memory Controls" "Disabled,Enabled"
bitfld.long 0x00 25. "TTLB,Trap TLB maintenance instructions" "Disabled,Enabled"
newline
bitfld.long 0x00 24. "TPU,Trap Cache maintenance instructions to point of unification" "Disabled,Enabled"
bitfld.long 0x00 23. "TPC,Trap Data/Unified cache maintenance instructions to point of coherency" "Disabled,Enabled"
newline
bitfld.long 0x00 22. "TSW,Trap Data/Unified cache Set/Way instructions" "Disabled,Enabled"
bitfld.long 0x00 21. "TAC,Trap Auxiliary Control Register Accesses" "Disabled,Enabled"
newline
bitfld.long 0x00 20. "TIDCP,Trap Lockdown" "Disabled,Enabled"
bitfld.long 0x00 19. "TSC,Trap SMC" "Disabled,Enabled"
newline
bitfld.long 0x00 18. "TID3,Trap ID Group 3" "Disabled,Enabled"
bitfld.long 0x00 17. "TID2,Trap ID Group 2" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "TID1,Trap ID Group 1" "Disabled,Enabled"
bitfld.long 0x00 15. "TID0,Trap ID Group 0" "Disabled,Enabled"
newline
bitfld.long 0x00 14. "TWE,Trap WFE" "Disabled,Enabled"
bitfld.long 0x00 13. "TWI,Trap WFI" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "DC,Default Cacheable" "Disabled,Enabled"
bitfld.long 0x00 10.--11. "BSU,Barrier Shareability Upgrade" "No effect,Inner,Outer,Full"
newline
bitfld.long 0x00 9. "FB,Force Broadcast of TLB maintenance BPIALL and ICIALLU instructions" "Disabled,Enabled"
bitfld.long 0x00 8. "VA,Virtual External Asynchronous Abort" "Not aborted,Aborted"
newline
bitfld.long 0x00 7. "VI,Virtual IRQ interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 6. "VF,Virtual FIQ interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 5. "AMO,A-bit Mask Override" "Not routed,Routed"
bitfld.long 0x00 4. "IMO,I-bit Mask Override" "Not routed,Routed"
newline
bitfld.long 0x00 3. "FMO,F-bit Mask Override" "Not routed,Routed"
bitfld.long 0x00 2. "PTW,Protected Table Walk" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "SWIO,Set/Way Invalidation Override" "No override,Override"
bitfld.long 0x00 0. "VM,Second Stage of Translation Enable" "Disabled,Enabled"
group.long c15:0x4411++0x00
line.long 0x00 "HCR2,Hypervisor Configuration Register 2"
bitfld.long 0x00 1. "ID,Stage 2 Instruction cache disable" "No,Yes"
bitfld.long 0x00 0. "CD,Stage 2 Data cache disable" "No,Yes"
group.long c15:0x4111++0x00
line.long 0x00 "HDCR,Hypervisor Debug Control Register"
bitfld.long 0x00 11. "TDRA,Trap Debug ROM Access" "No effect,Valid"
bitfld.long 0x00 10. "TDOSA,Trap Debug OS-related register Access" "No effect,Valid"
newline
bitfld.long 0x00 9. "TDA,Trap Debug Access" "No effect,Valid"
bitfld.long 0x00 8. "TDE,Trap Debug Exceptions" "No effect,Valid"
newline
bitfld.long 0x00 7. "HPME,Hypervisor Performance Monitors Enable" "Disabled,Enabled"
bitfld.long 0x00 6. "TPM,Trap Performance Monitors accesses" "No effect,Valid"
newline
bitfld.long 0x00 5. "TPMCR,Trap Performance Monitor Control Register accesses" "No effect,Valid"
bitfld.long 0x00 0.--4. "HPMN,Defines the number of Performance Monitors counters" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long c15:0x4211++0x00
line.long 0x00 "HCPTR,Hypervisor Architectural Feature Trap Register"
bitfld.long 0x00 31. "TCPAC,Trap Coprocessor Access Control" "Not trapped,Trapped"
bitfld.long 0x00 20. "TTA,Trap Trace Access" "Not supported,"
newline
bitfld.long 0x00 15. "TASE,Trap Advanced SIMD extensions" "Not trapped,Trapped"
bitfld.long 0x00 11. "TCP11,Trap coprocessor 11" "Not trapped,Trapped"
newline
bitfld.long 0x00 10. "TCP10,Trap coprocessor 10" "Not trapped,Trapped"
group.long c15:0x4311++0x00
line.long 0x00 "HSTR,Hypervisor System Trap Register"
bitfld.long 0x00 15. "T15,Trap to Hypervisor mode Non-secure priv 15" "No effect,Trap"
bitfld.long 0x00 13. "T13,Trap to Hypervisor mode Non-secure priv 13" "No effect,Trap"
newline
bitfld.long 0x00 12. "T12,Trap to Hypervisor mode Non-secure priv 12" "No effect,Trap"
bitfld.long 0x00 11. "T11,Trap to Hypervisor mode Non-secure priv 11" "No effect,Trap"
newline
bitfld.long 0x00 10. "T10,Trap to Hypervisor mode Non-secure priv 10" "No effect,Trap"
bitfld.long 0x00 9. "T9,Trap to Hypervisor mode Non-secure priv 9" "No effect,Trap"
newline
bitfld.long 0x00 8. "T8,Trap to Hypervisor mode Non-secure priv 8" "No effect,Trap"
bitfld.long 0x00 7. "T7,Trap to Hypervisor mode Non-secure priv 7" "No effect,Trap"
newline
bitfld.long 0x00 6. "T6,Trap to Hypervisor mode Non-secure priv 6" "No effect,Trap"
bitfld.long 0x00 5. "T5,Trap to Hypervisor mode Non-secure priv 5" "No effect,Trap"
newline
bitfld.long 0x00 3. "T3,Trap to Hypervisor mode Non-secure priv 3" "No effect,Trap"
bitfld.long 0x00 2. "T2,Trap to Hypervisor mode Non-secure priv 2" "No effect,Trap"
newline
bitfld.long 0x00 1. "T1,Trap to Hypervisor mode Non-secure priv 1" "No effect,Trap"
bitfld.long 0x00 0. "T0,Trap to Hypervisor mode Non-secure priv 0" "No effect,Trap"
rgroup.long c15:0x4711++0x00
line.long 0x00 "HACR,Hypervisor Auxiliary Configuration Register"
if (((per.l(c15:0x4202))&0x07)==0x00)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 5.--47. 0x20 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x01)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 4.--47. 0x10 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x02)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 12.--47. 0x10 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x03)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 11.--47. 0x8 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x04)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 10.--47. 0x4 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x05)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 9.--47. 0x2 "BADDR,Translation table base address"
elif (((per.l(c15:0x4202))&0x07)==0x06)
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 8.--47. 0x1 "BADDR,Translation table base address"
else
group.quad c15:0x14020++0x01
line.quad 0x00 "HTTBR,Hypervisor Translation Table Base Register"
hexmask.quad 0x00 7.--47. 0x80 "BADDR,Translation table base address"
endif
group.long c15:0x4202++0x00
line.long 0x00 "HTCR,Hypervisor Translation Control Register"
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate,Write-Through,Write-Back no Write-Allocate"
newline
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks using TTBR0/HTTBR" "Non-cacheable,Write-Back Write-Allocate,Write-Through,Write-Back no Write-Allocate"
bitfld.long 0x00 0.--2. "T0SZ,The Size offset of the TTBR0/HTTBR addressed region" "0,1,2,3,4,5,6,7"
if (((per.l(c15:0x4212))&0x0F)==0x00)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad 0x00 5.--47. 0x20 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x01)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad 0x00 4.--47. 0x10 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x02)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad 0x00 12.--47. 0x10 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x03)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad 0x00 11.--47. 0x8 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x04)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad 0x00 10.--47. 0x4 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x05)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad 0x00 9.--47. 0x2 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x06)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad 0x00 8.--47. 0x1 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x07)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad 0x00 7.--47. 0x80 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x08)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad.long 0x00 22.--47. 0x40 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x09)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad.long 0x00 21.--47. 0x20 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x0A)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad.long 0x00 20.--47. 0x10 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x0B)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad.long 0x00 19.--47. 0x8 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x0C)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad.long 0x00 18.--47. 0x4 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x0D)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad.long 0x00 17.--47. 0x2 "BADDR,Translation table base address"
elif (((per.l(c15:0x4212))&0x0F)==0x0E)
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad.long 0x00 16.--47. 0x1 "BADDR,Translation table base address"
else
group.quad c15:0x16020++0x01
line.quad 0x00 "VTTBR,Virtualization Translation Table Base Register"
hexmask.quad.byte 0x00 48.--55. 1. "VMID,The VMID for the translation table"
hexmask.quad 0x00 15.--47. 0x80 "BADDR,Translation table base address"
endif
group.long c15:0x4212++0x00
line.long 0x00 "VTCR,Virtualization Translation Control Register"
bitfld.long 0x00 12.--13. "SH0,Shareability attributes for the memory associated with the translation table walks using VTTBR" "Non-shareable,Reserved,Outer Shareable,Inner Shareable"
bitfld.long 0x00 10.--11. "ORGN0,Outer Cacheability attributes for the memory associated with the translation table walks using VTTBR" "Non-cacheable,Write-Back Write-Allocate,Write-Through,Write-Back no Write-Allocate"
newline
bitfld.long 0x00 8.--9. "IRGN0,Inner Cacheability attributes for the memory associated with the translation table walks VTTBR" "Non-cacheable,Write-Back Write-Allocate,Write-Through,Write-Back no Write-Allocate"
bitfld.long 0x00 6.--7. "SL0,Starting Level for VTCR addressed region" "2nd level,1st level,,"
newline
bitfld.long 0x00 4. "S,Sign-extension of the T0SZ field" "Low,High"
bitfld.long 0x00 0.--3. "T0SZ,The Size offset of the VTCR addressed region" "0,1,2,3,4,5,6,7,-8,-7,-6,-5,-4,-3,-2,-1"
group.long c15:0x4006++0x00
line.long 0x00 "HDFAR,Hypervisor Data Fault Address Register"
if (((per.l(c15:0x4025))&0xFC000000)==(0x00000000||0x38000000||0x88000000||0x98000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
elif (((per.l(c15:0x4025))&0xFC000000)==0x04000000)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 0. "TI,Trapped instruction" "WFI,WFE"
elif (((per.l(c15:0x4025))&0xFC000000)==(0x0C000000||0x14000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 17.--19. "OPC2,Opc2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.l(c15:0x4025))&0xFC000000)==(0x10000000||0x30000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
bitfld.long 0x00 16.--19. "OPC1,Opc1 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10.--14. "RT2,Rt2 value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.l(c15:0x4025))&0xFC000000)==0x18000000)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
newline
hexmask.long.byte 0x00 12.--19. 1. "IMM8,The immediate value from the issued instruction"
bitfld.long 0x00 5.--9. "RN,Rn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 4. "OFFSET,Indicates whether the offset is added or subtracted" "Subtracted,Added"
bitfld.long 0x00 1.--3. "AM,Addressing mode" "Immediate unindexed,Immediate post-indexed,Immediate offset,Immediate pre-indexed,Literal unindexed,Reserved,Literal offset,Reserved"
newline
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.l(c15:0x4025))&0xFC000000)==0x1C000000)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--23. "COND,Condition code for the trapped instruction" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
elif (((per.l(c15:0x4025))&0xFC000000)==(0x44000000||0x54000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. 1. "IMM16,The value of the immediate field from the HVC or SVC instruction"
elif (((per.l(c15:0x4025))&0xFC000000)==0x60000000)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "CV,Condition code valid" "Not valid,Valid"
bitfld.long 0x00 20.--21. "OP0,Op0 value from the issued instruction" "0,1,2,3"
newline
bitfld.long 0x00 17.--19. "OP2,Op2 value from the issued instruction" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 14.--16. "OP1,Op1 value from the issued instruction" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--13. "CRN,CRn value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 5.--9. "RT,Rt value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 1.--4. "CRM,CRm value from the issued instruction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0. "DIRECTION,Direction of the trapped instruction" "Write,Read"
elif (((per.l(c15:0x4025))&0xFC000000)==(0x80000000||0x84000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "Address size/TTBR[0/1],Reserved,Reserved,Reserved,Reserved,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort,Reserved,Reserved,Reserved,Reserved,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity,Reserved,Reserved,Reserved,Reserved,Sync. parity/1st level,Sync. parity/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Debug,?..."
elif (((per.l(c15:0x4025))&0xFD000000)==(0x91000000||0x95000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.long 0x00 22.--23. "SAS,Syndrome Access Size" "Byte,Halfword,Word,Doubleword"
newline
bitfld.long 0x00 21. "SSE,Syndrome Sign Extend" "Not required,Required"
bitfld.long 0x00 16.--20. "SRT,Syndrome Register transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 15. "SF,Width of the register accessed by the instruction is Sixty-Four" "32-bit,64-bit"
bitfld.long 0x00 14. "AR,Acquire/Release" "No,Yes"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((per.l(c15:0x4025))&0xFD000000)==(0x90000000||0x94000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 10. "FNV,FAR not Valid" "No,Yes"
bitfld.long 0x00 9. "EA,External abort type" "DECERR,SLVERR"
newline
bitfld.long 0x00 8. "CM,Fault came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 7. "S1PTW,Fault on the stage 2 translation of an address accessed during a stage 1 translation table walk" "Not stage 2,Stage 2"
newline
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
bitfld.long 0x00 0.--5. "DFSC,Data Fault Status Code" "Address size/0th level/TTBR,Address size/1st level,Address size/2nd level,Address size/3rd level,Translation/0th level,Translation/1st level,Translation/2nd level,Translation/3rd level,Reserved,Access flag/1st level,Access flag/2nd level,Access flag/3d level,Reserved,Permission/1st level,Permission/2nd level,Permission/3rd level,Sync. external abort/not table walk,Reserved,Reserved,Reserved,Sync. external abort/0th level,Sync. external abort/1th level,Sync. external abort/2th level,Sync. external abort/3th level,Sync. parity/ECC/not table walk,Reserved,Reserved,Reserved,Sync. parity/ECC/0th level,Sync. parity/ECC/1st level,Sync. parity/ECC/2nd level,Sync. parity/ECC/3rd level,Reserved,Alignment,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,TLB conflict,Reserved,Reserved,Reserved,Lockdown,Unsupported Exclusive access,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Section Domain,Page Domain,Reserved"
elif (((per.l(c15:0x4025))&0xFC800000)==(0xA0800000||0xB0800000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 7. "IDF,Input Denormal floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 4. "IXF,Inexact floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "UFF,Underflow floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 2. "OFF,Overflow floating-point exception trapped" "Not occurred,Occurred"
newline
bitfld.long 0x00 1. "DZF,Divide-by-zero floating-point exception trapped" "Not occurred,Occurred"
bitfld.long 0x00 0. "IOF,Invalid Operation floating-point exception trapped" "Not occurred,Occurred"
elif (((per.l(c15:0x4025))&0xFC800000)==(0xA0000000||0xB0000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 23. "TFV,Trapped Fault Valid" "Not valid,Valid"
bitfld.long 0x00 8.--10. "VECITR,Number of the element that is being reported" "0,1,2,3,4,5,6,7"
elif (((per.l(c15:0x4025))&0xFD000000)==0xBD000000)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
bitfld.long 0x00 15. "UNASE,Unattributable System Error" "Attributable,Unattributable"
newline
bitfld.long 0x00 14. "UNCSE,Uncontainable System Error" "Containable,Uncontainable"
bitfld.long 0x00 0.--1. "SES,System Error Source" "Decode,ECC,Slave,"
elif (((per.l(c15:0x4025))&0xFD000000)==0xBC000000)
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,Instruction syndrome valid" "Not valid,Valid"
elif (((per.l(c15:0x4025))&0xFC000000)==(0xC0000000||0xC4000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((per.l(c15:0x4025))&0xFC000000)==(0xC8000000||0xCC000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 24. "ISV,EX bit valid" "Not valid,Valid"
bitfld.long 0x00 6. "EX,Exclusive operation" "No,Yes"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((per.l(c15:0x4025))&0xFC000000)==(0xD0000000||0xD4000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
bitfld.long 0x00 8. "CM,Data came from a Cache Maintenance Instruction other than DC ZVA" "No,Yes"
bitfld.long 0x00 6. "WNR,Write not Read" "Read,Write"
newline
bitfld.long 0x00 0.--5. "IFSC,Instruction Fault Status Code" "0,1,2,3,%d..."
elif (((per.l(c15:0x4025))&0xFC000000)==(0xE0000000||0xF0000000))
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
bitfld.long 0x00 25. "IL,Instruction Length for synchronous exceptions" "16-bit,32-bit"
newline
hexmask.long.word 0x00 0.--15. 1. "COMMENT,Set to the instruction comment field value"
else
group.long c15:0x4025++0x00
line.long 0x00 "HSR,Hypervisor Syndrome Register"
bitfld.long 0x00 26.--31. "EC,Hypervisor class" "Unknown reason,WFI/WFE instruction,Reserved,MCR/MRC to CP15/AArch32,MCRR/MRRC to CP15/AArch32,MCR/MRC to CP14/AArch32,LDC/STC to CP14/AArch32,SIMD/Floating point register,Reserved,Reserved,Reserved,Reserved,MCRR/MRRC to CP14/AArch32,Reserved,Illegal execution,Reserved,Reserved,SVC in AArch32,Reserved,Reserved,Reserved,SVC in AArch64,Reserved,Reserved,MSR/MRS/System in AArch64,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Instruction abort,Instruction abort/AArch64,PC alignment fault,Reserved,Data abort,Data abort/Aarch64,SP alignment fault,Reserved,Trapped Floating-point/AArch32,Reserved,Reserved,Reserved,Trapped Floating-point/AArch64,Reserved,Reserved,SError interrupt,Breakpoint/lower level,Breakpoint/current level,Software Step/lower level,Software Step/current level,Watchpoint debug/lower level,Watchpoint debug/current level,Reserved,Reserved,Software Breakpoint/AArch32,Reserved,Reserved,Reserved,Software Breakpoint/AArch64,Reserved,Reserved,Reserved"
endif
group.long c15:0x4206++0x00
line.long 0x00 "HIFAR,Hypervisor Instruction Fault Address Register"
group.long c15:0x4406++0x00
line.long 0x00 "HPFAR,Hypervisor IPA Fault Address Register"
hexmask.long 0x00 4.--31. 1. "FIPA,Bits [39:12] of the faulting intermediate physical address"
group.long c15:0x400C++0x00
line.long 0x00 "HVBAR,Hypervisor Vector Base Address Register"
hexmask.long 0x00 5.--31. 0x20 "HVBADDR,Hypervisor Vector Base Address"
tree.end
tree "Cache Control and Configuration"
rgroup.long c15:0x0100++0x00
line.long 0x00 "CTR,Cache Type Register"
bitfld.long 0x00 24.--27. "CWG,Cache writeback granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x00 20.--23. "ERG,Exclusives reservation granule size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
bitfld.long 0x00 16.--19. "DMINLINE,Smallest data cache line size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
newline
bitfld.long 0x00 14.--15. "L1POLICY,L1 Instruction cache policy" "Reserved,Reserved,Reserved,PIPT"
bitfld.long 0x00 0.--3. "IMINLINE,I-Cache Minimum Line Size" "Reserved,Reserved,Reserved,Reserved,16 words,?..."
rgroup.long c15:0x1100++0x00
line.long 0x00 "CLIDR,Cache Level ID Register"
bitfld.long 0x00 27.--29. "LOUU,Level of Unification Uniprocessor" "Reserved,Level 1,Reserved,?..."
bitfld.long 0x00 24.--26. "LOC,Level of Coherency" "Reserved,Reserved,Level 3,?..."
newline
bitfld.long 0x00 21.--23. "LOUIS,Level of Unification Inner Shareable" "Reserved,Level 2,?..."
bitfld.long 0x00 18.--20. "CTYPE7,Cache type for levels 7" "No cache,?..."
newline
bitfld.long 0x00 15.--17. "CTYPE6,Cache type for levels 6" "No cache,?..."
bitfld.long 0x00 12.--14. "CTYPE5,Cache type for levels 5" "No cache,?..."
newline
bitfld.long 0x00 9.--11. "CTYPE4,Cache type for levels 4" "No cache,?..."
bitfld.long 0x00 6.--8. "CTYPE3,Cache type for levels 3" "No cache,?..."
newline
bitfld.long 0x00 3.--5. "CTYPE2,Cache type for levels 2" "Reserved,Reserved,Reserved,Reserved,Unified,?..."
bitfld.long 0x00 0.--2. "CTYPE1,Cache type for levels 1" "Reserved,Reserved,Reserved,Separate I/D,?..."
rgroup.long c15:0x1700++0x0
line.long 0x00 "AIDR,Auxiliary ID Register"
rgroup.long c15:0x1000++0x00
line.long 0x00 "CCSIDR,Current Cache Size ID Register"
bitfld.long 0x00 31. "WT,Write-Through" "Not Supported,"
bitfld.long 0x00 30. "WB,Write-Back" "Not Supported,Supported"
newline
bitfld.long 0x00 29. "RA,Read-Allocate" "Not Supported,Supported"
bitfld.long 0x00 28. "WA,Write-Allocate" "Not Supported,Supported"
newline
hexmask.long.word 0x00 13.--27. 1. "SETS,Number of Sets"
hexmask.long.word 0x00 3.--12. 1. "ASSOC,Associativity"
newline
bitfld.long 0x00 0.--2. "LSIZE,Line Size" "Reserved,Reserved,64 bytes,?..."
group.long c15:0x2000++0x00
line.long 0x00 "CSSELR,Cache Size Selection Register"
bitfld.long 0x00 1.--3. "LEVEL,Cache level of required cache" "Level 1,Level 2,?..."
bitfld.long 0x00 0. "IND,Instruction/Not Data" "Data/Unified,Instruction"
tree "Level 1 memory system"
group.long c15:0x001F++0x00
line.long 0x00 "DL1DATA0,Data L1 Data 0 Register"
group.long c15:0x011F++0x00
line.long 0x00 "DL1DATA1,Data L1 Data 1 Register"
group.long c15:0x021F++0x00
line.long 0x00 "DL1DATA2,Data L1 Data 2 Register"
group.long c15:0x031F++0x00
line.long 0x00 "DL1DATA3,Data L1 Data 3 Register"
group.long c15:0x041F++0x00
line.long 0x00 "DL1DATA4,Data L1 Data 4 Register"
group.long c15:0x000F++0x00
line.long 0x00 "IL1DATA0,Instruction L1 Data 0 Register"
group.long c15:0x010F++0x00
line.long 0x00 "IL1DATA1,Instruction L1 Data 1 Register"
group.long c15:0x020F++0x00
line.long 0x00 "IL1DATA2,Instruction L1 Data 2 Register"
group.long c15:0x030F++0x00
line.long 0x00 "IL1DATA3,Instruction L1 Data 3 Register"
wgroup.long c15:0x04F++0x00
line.long 0x00 "RAMINDEX,RAM Index Operation Register"
hexmask.long.byte 0x00 24.--31. 1. "RAMID,RAM identifier"
bitfld.long 0x00 18.--21. "WAY,Indicates the way of the RAM that is being accessed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.tbyte 0x00 0.--17. 1. "INDEX,Indicates the index address of the RAM that is being accessed"
tree.end
tree "Level 2 memory system"
group.long c15:0x1209++0x00
line.long 0x00 "L2CTLR,L2 Control Register"
bitfld.long 0x00 31. "L2RSTDM,L2RSTDISABLE monitor" "Reset,No reset"
bitfld.long 0x00 24.--25. "NCPU,Number of CPU" "1,2,3,4"
rbitfld.long 0x00 23. "L2CP,L2 cache ECC protection" "Not supported,Supported"
newline
rbitfld.long 0x00 22. "L1CECCPP,L1 Cache ECC and Parity protection" "Not supported,Supported"
bitfld.long 0x00 21. "ECCPPEN,ECC and parity enable" "Disabled,Enabled"
bitfld.long 0x00 20. "DIECCE,Data inline ECC enable" "Disabled,Enabled"
newline
rbitfld.long 0x00 13. "L2AS,L2 arbitration slice" "Not present,Present"
rbitfld.long 0x00 12. "L2TRAMS,L2 Tag RAM slice" "Not present,Present"
rbitfld.long 0x00 10.--11. "L2DRAMS,L2 Data RAM slice" "Not present,1 present,2 present,?..."
newline
bitfld.long 0x00 9. "L2TRAMS,L2 Tag RAM setup" "0 cycle,1 cycle"
bitfld.long 0x00 6.--8. "L2TRAML,L2 Tag RAM latency" "2 cycles,2 cycles,3 cycles,4 cycles,5 cycles,5 cycles,5 cycles,5 cycles"
rbitfld.long 0x00 5. "DRAMIL,L2 data RAM input latency" "0 cycle,1 cycle"
newline
bitfld.long 0x00 0.--2. "DRAML,L2 data RAM latency" "2 cycles,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,6 cycles,6 cycles"
group.long c15:0x1309++0x00
line.long 0x00 "L2ECTLR,L2 Extended Control Register"
bitfld.long 0x00 30. "L2INTASYNCERR,L2 internal asynchronous error" "No error,Error"
bitfld.long 0x00 29. "AXIASYNCERR,AXI asynchronous error" "No error,Error"
bitfld.long 0x00 0.--2. "L2DRC,L2 dynamic retention control" "Disabled,2 ticks,8 ticks,32 ticks,64 ticks,128 ticks,256 ticks,512 ticks"
group.long c15:0x100F++0x00
line.long 0x00 "L2ACTLR,L2 Auxiliary Control Register"
bitfld.long 0x00 30.--31. "L2PLRUIP,Select the L2 PLRU insertion point" "MRU/LRU,MRU,3/4 LRU,LRU"
bitfld.long 0x00 29. "L2RPLCPOL,Select the L2 cache replacement policy" "PLRU,Pseudo random"
bitfld.long 0x00 28. "FL2TBCEA,Force L2 tag bank clock enable active" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "FL2LCEA,Force L2 logic clock enable active" "Disabled,Enabled"
bitfld.long 0x00 26. "FL2GICRCGEA,Force L2, GIC CPU interface, and Timer Regional Clock Gate(RCG) enables active" "Not forced,Forced"
bitfld.long 0x00 25. "ESIAA,Enable single issue across all tag banks when the L2 arbitration replay threshold is reached" "Disabled,Enabled"
newline
bitfld.long 0x00 24. "L2PLRUMD,Disable PLRU dynamic insertion and update policy" "No,Yes"
bitfld.long 0x00 23. "DACPMUWLU,Disable ACP MakeUnique and WriteLineUnique transactions" "No,Yes"
bitfld.long 0x00 22. "DDTLSPR,Disable dynamic throttling of load/store prefetch requests" "No,Yes"
newline
bitfld.long 0x00 18.--19. "DLASQ,Disable limit on NC/SO/Dev stores in Address Sequence Queue" "12 entries,10 entries,8 entries,No limit"
bitfld.long 0x00 17. "DL2RRA,Disable L2 round-robin arbitration that only clocks through paths with an active requestor waiting to be arbitrated" "No,Yes"
bitfld.long 0x00 16. "ERTSI,Enable replay threshold single issue" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DFFD,Disable fast forwarding of data from ACE or CHI to LS and IF" "No,Yes"
bitfld.long 0x00 14. "EUCE,Enable UniqueClean evictions with data" "Disabled,Enabled"
bitfld.long 0x00 13. "DCEO,Disable clean evict optimization" "No,Yes"
newline
bitfld.long 0x00 12. "DPSHO,Disable set hazard optimization against prefetch entries" "No,Yes"
bitfld.long 0x00 11. "DDSB,Disable DSB with no DVM synchronization" "No,Yes"
bitfld.long 0x00 10. "DNSDAR,Disable Non-secure debug array read" "No,Yes"
newline
bitfld.long 0x00 9. "DWHOBBRRQ,Disable set/way hazard optimization on back to back reads from the same CPU targeting the same set" "No,Yes"
bitfld.long 0x00 8. "DDVMCMOMB,Disable DVM and cache maintenance operation message broadcast" "No,Yes"
bitfld.long 0x00 7. "EHDT,Enable hazard detect timeout" "Disabled,Enabled"
newline
bitfld.long 0x00 6. "DACESCHIST,Disable ACE shareable or CHI snoopable transactions from master" "No,Yes"
bitfld.long 0x00 5. "DSWHOWWM,Disables set/way hazard optimization for WBNA/WT memory" "No,Yes"
bitfld.long 0x00 4. "DWUWLUTFM,Disable WriteUnique and WriteLineUnique transactions from master" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DCEPTE,Disable clean/evict push to external" "No,Yes"
bitfld.long 0x00 2. "LTORPTB,Limit to one request per tag bank" "Normal,Limited"
bitfld.long 0x00 1. "EARTT,Enable arbitration replay threshold timeout" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DHPF,Disable hardware prefetch forwarding" "No,Yes"
group.quad c15:0x130F0++0x01
line.quad 0x00 "L2MERRSR,L2 Memory Error Syndrome Register"
bitfld.quad 0x00 63. "FATAL,Fatal bit" "0,1"
hexmask.quad.byte 0x00 40.--47. 1. "OEC,Other error count"
newline
hexmask.quad.byte 0x00 32.--39. 1. "REC,Repeat error count"
bitfld.quad 0x00 31. "VALID,Valid bit" "Not valid,Valid"
newline
hexmask.quad.byte 0x00 24.--30. 1. "RAMID,RAM Identifier"
bitfld.quad 0x00 18.--21. "C/W,CPUID/Way" "CPU0 tag way 0,CPU0 tag way 1,CPU1 tag way 0,CPU1 tag way 1,CPU2 tag way 0,CPU2 tag way 1,CPU3 tag way 0,CPU3 tag way 1,?..."
newline
hexmask.quad.tbyte 0x00 0.--17. 1. "IND,Index"
tree.end
tree.end
tree "System Performance Monitor"
group.long c15:0xc9++0x00
line.long 0x00 "PMCR,Performance Monitor Control Register"
hexmask.long.byte 0x00 24.--31. 1. "IMP,Implementer code"
hexmask.long.byte 0x00 16.--23. 1. "IDCODE,Identification code"
rbitfld.long 0x00 11.--15. "N,Number of counters implemented" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,6,?..."
bitfld.long 0x00 6. "LC,Long cycle count enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "DP,Disable CCNT when prohibited" "No,Yes"
bitfld.long 0x00 4. "X,Export Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "D,Clock Divider" "Every cycle,64th cycle"
bitfld.long 0x00 2. "C,Clock Counter Reset" "No reset,Reset"
newline
bitfld.long 0x00 1. "P,Performance Counter Reset" "No reset,Reset"
bitfld.long 0x00 0. "E,All Counters Enable" "Disabled,Enabled"
newline
group.long c15:0x1c9++0x00
line.long 0x00 "PMCNTENSET,Count Enable Set Register "
bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "P5,Event Counter 5 enable bit" "Disabled,Enabled"
bitfld.long 0x00 4. "P4,Event Counter 4 enable bit" "Disabled,Enabled"
bitfld.long 0x00 3. "P3,Event Counter 3 enable bit" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "P2,Event Counter 2 enable bit" "Disabled,Enabled"
bitfld.long 0x00 1. "P1,Event Counter 1 enable bit" "Disabled,Enabled"
bitfld.long 0x00 0. "P0,Event Counter 0 enable bit" "Disabled,Enabled"
group.long c15:0x2c9++0x00
line.long 0x00 "PMCNTENCLR,Count Enable Clear Register"
bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
newline
eventfld.long 0x00 5. "P5,Event Counter 5 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 4. "P4,Event Counter 4 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 3. "P3,Event Counter 3 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
newline
eventfld.long 0x00 2. "P2,Event Counter 2 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 1. "P1,Event Counter 1 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 0. "P0,Event Counter 0 clear bit [Read/Write]" "Disabled/No effect,Enabled/Disable"
group.long c15:0x3c9++0x00
line.long 0x00 "PMOVSR,Performance Monitor Overflow Status Register"
eventfld.long 0x00 31. "C,PMCCNTR overflow [Read/Write]" "No overflow/No effect,Overflow/Clear"
newline
eventfld.long 0x00 5. "P5,PMN5 overflow [Read/Write]" "No overflow/No effect,Overflow/Clear"
eventfld.long 0x00 4. "P4,PMN4 overflow [Read/Write]" "No overflow/No effect,Overflow/Clear"
eventfld.long 0x00 3. "P3,PMN3 overflow [Read/Write]" "No overflow/No effect,Overflow/Clear"
newline
eventfld.long 0x00 2. "P2,PMN2 overflow [Read/Write]" "No overflow/No effect,Overflow/Clear"
eventfld.long 0x00 1. "P1,PMN1 overflow [Read/Write]" "No overflow/No effect,Overflow/Clear"
eventfld.long 0x00 0. "P0,PMN0 overflow [Read/Write]" "No overflow/No effect,Overflow/Clear"
group.long c15:0x4c9++0x00
line.long 0x00 "PMSWINC,Performance Monitor Software Increment"
bitfld.long 0x00 5. "P5,Increment  PMN5" "No action,Increment"
bitfld.long 0x00 4. "P4,Increment  PMN4" "No action,Increment"
bitfld.long 0x00 3. "P3,Increment  PMN3" "No action,Increment"
newline
bitfld.long 0x00 2. "P2,Increment  PMN2" "No action,Increment"
bitfld.long 0x00 1. "P1,Increment  PMN1" "No action,Increment"
bitfld.long 0x00 0. "P0,Increment  PMN0" "No action,Increment"
group.long c15:0x5c9++0x00
line.long 0x00 "PMSELR,Performance Monitor Select Register"
bitfld.long 0x00 0.--4. "SEL,Current event counter select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,?..."
group.long c15:0xd9++0x00
line.long 0x00 "PMCCNTR,Performance Monitor Cycle Count Register"
group.long c15:0x1d9++0x00
line.long 0x00 "PMXEVTYPER,Performance Monitor Event Type Register"
group.long c15:0x2d9++0x00
line.long 0x00 "PMXEVCNTR,Performance Monitor Event Count Register"
bitfld.long 0x00 5. "EVENT[5],Value of 5 event counter" "0,1"
bitfld.long 0x00 4. "EVENT[4],Value of 4 event counter" "0,1"
bitfld.long 0x00 3. "EVENT[3],Value of 3 event counter" "0,1"
newline
bitfld.long 0x00 2. "EVENT[2],Value of 2 event counter" "0,1"
bitfld.long 0x00 1. "EVENT[1],Value of 1 event counter" "0,1"
bitfld.long 0x00 0. "EVENT[0],Value of 0 event counter" "0,1"
newline
group.long c15:0xe9++0x00
line.long 0x00 "PMUSERENR,Performance Monitor User Enable Register"
bitfld.long 0x00 3. "ER,Event counter read enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CR,Cycle counter read enable" "Disabled,Enabled"
bitfld.long 0x00 1. "SW,Software Increment write enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "EN,User mode access enable" "Disabled,Enabled"
group.long c15:0x1e9++0x00
line.long 0x00 "PMINTENSET,Performance Monitor Interrupt Enable Set"
bitfld.long 0x00 31. "C,PMCCNTR enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "P5,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 4. "P4,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "P3,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "P2,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 1. "P1,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 0. "P0,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled"
group.long c15:0x2e9++0x00
line.long 0x00 "PMINTENCLR,Performance Monitor Interrupt Enable Clear"
eventfld.long 0x00 31. "C,PMCCNTR enable [Read/Write]" "Disabled/No effect,Enabled/Disable"
newline
eventfld.long 0x00 5. "P5,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 4. "P4,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 3. "P3,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
newline
eventfld.long 0x00 2. "P2,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 1. "P1,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
eventfld.long 0x00 0. "P0,Overflow Interrupt Clear [Read/Write]" "Disabled/No effect,Enabled/Disable"
group.long c15:0x3e9++0x00
line.long 0x00 "PMOVSSET,Performance Monitor Overflow Flag Status Set Register"
group.long c15:0x8E++0x00
line.long 0x00 "PMEVCNTR0,Performance Monitors Event Count Register 0"
group.long c15:(0x8E+0x40)++0x00
line.long 0x00 "PMEVTYPER0,Performance Monitors Selected Event Type Register 0"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x18E++0x00
line.long 0x00 "PMEVCNTR1,Performance Monitors Event Count Register 1"
group.long c15:(0x18E+0x40)++0x00
line.long 0x00 "PMEVTYPER1,Performance Monitors Selected Event Type Register 1"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x28E++0x00
line.long 0x00 "PMEVCNTR2,Performance Monitors Event Count Register 2"
group.long c15:(0x28E+0x40)++0x00
line.long 0x00 "PMEVTYPER2,Performance Monitors Selected Event Type Register 2"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x38E++0x00
line.long 0x00 "PMEVCNTR3,Performance Monitors Event Count Register 3"
group.long c15:(0x38E+0x40)++0x00
line.long 0x00 "PMEVTYPER3,Performance Monitors Selected Event Type Register 3"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x48E++0x00
line.long 0x00 "PMEVCNTR4,Performance Monitors Event Count Register 4"
group.long c15:(0x48E+0x40)++0x00
line.long 0x00 "PMEVTYPER4,Performance Monitors Selected Event Type Register 4"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x58E++0x00
line.long 0x00 "PMEVCNTR5,Performance Monitors Event Count Register 5"
group.long c15:(0x58E+0x40)++0x00
line.long 0x00 "PMEVTYPER5,Performance Monitors Selected Event Type Register 5"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
hexmask.long.word 0x00 0.--9. 1. "EVTCOUNT,Event to count"
group.long c15:0x07FE++0x00
line.long 0x00 "PMCCFILTR,Performance Monitors Cycle Count Filter Register"
bitfld.long 0x00 31. "P,EL1 modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 30. "U,EL0 filtering bit" "Enabled,Disabled"
bitfld.long 0x00 29. "NSK,Non-secure kernel modes filtering bit" "Enabled,Disabled"
newline
bitfld.long 0x00 28. "NSU,Non-secure user modes filtering bit" "Enabled,Disabled"
bitfld.long 0x00 27. "NSH,Non-secure Hypervisor modes filtering bit" "Disabled,Enabled"
tree.end
tree "System Timer Registers"
group.long c15:0x000E++0x00
line.long 0x00 "CNTFRQ,Counter Frequency Register"
rgroup.quad c15:0x100E0++0x01
line.quad 0x00 "CNTPCT,Counter Physical Count Register"
group.long c15:0x001E++0x00
line.long 0x00 "CNTKCTL,Timer PL1 Control Register"
bitfld.long 0x00 9. "EL0PTEN,Controls whether the physical timer registers are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 8. "EL0VTEN,Controls whether the virtual timer registers are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 4.--7. "EVNTI,Selects which bit of CNTVCT is the trigger for the event stream generated from the virtual counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0"
newline
bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled"
bitfld.long 0x00 1. "EL0VCTEN,Controls whether the virtual counter, CNTVCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 0. "EL0PCTEN,Controls whether the physical counter, CNTPCT, and the frequency register CNTFRQ, are accessible from EL0 modes" "Not accessible,Accessible"
group.long c15:0x002E++0x00
line.long 0x00 "CNTP_TVAL,Counter PL1 Physical Compare Value Register"
group.long c15:0x012E++0x00
line.long 0x00 "CNTP_CTL,Counter PL1 Physical Timer Control Register"
rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.long c15:0x003E++0x00
line.long 0x00 "CNTV_TVAL,Counter PL1 Virtual Timer Value Register"
group.long c15:0x013E++0x00
line.long 0x00 "CNTV_CTL,Counter PL1 Virtual Timer Control Register"
rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad c15:0x110E0++0x01
line.quad 0x00 "CNTVCT,Counter Virtual Count Register"
group.quad c15:0x120E0++0x01
line.quad 0x00 "CNTP_CVAL,Counter PL1 Physical Compare Value Register"
group.quad c15:0x130E0++0x01
line.quad 0x00 "CNTV_CVAL,Counter PL1 Virtual Compare Value Register"
group.quad c15:0x140E0++0x01
line.quad 0x00 "CNTVOFF,Counter Virtual Offset Register"
group.long c15:0x401E++0x00
line.long 0x00 "CNTHCTL,Counter Non-secure PL2 Control Register"
bitfld.long 0x00 4.--7. "EVNTI,Select trigger for the event stream generated from counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 3. "EVNTDIR,Controls which transition of the CNTVCT trigger bit" "0 to 1,1 to 0"
bitfld.long 0x00 2. "EVNTEN,Enables the generation of an event stream from the virtual counter" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "EL1VCTEN,Controls whether the Non-secure copies of the physical timer registers are accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible"
bitfld.long 0x00 0. "EL1PCTEN,Controls whether the physical counter, CNTPCT, is accessible from Non-secure EL1 and EL0 modes" "Not accessible,Accessible"
group.long c15:0x402E++0x00
line.long 0x00 "CNTHP_TVAL,Counter Non-secure PL2 Physical Timer Value Register"
group.long c15:0x412E++0x00
line.long 0x00 "CNTHP_CTL,Counter Non-secure PL2 Physical Timer Control Register"
rbitfld.long 0x00 2. "ISTATUS,The status of the timer interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "IMASK,Timer interrupt mask bit" "Not masked,Masked"
bitfld.long 0x00 0. "ENABLE,Enables the timer" "Disabled,Enabled"
group.quad c15:0x160E0++0x01
line.quad 0x00 "CNTHP_CVAL,Counter Non-secure PL2 Physical Compare Value Register"
tree.end
tree "Generic Interrupt Controller CPU Interface"
tree "AArch32 GIC Physical CPU Interface System Registers"
tree.open "Interrupt Controller Active Priorities Registers"
group.long c15:0x048C++0x00
line.long 0x00 "ICC_AP0R0,Active Priorities 0 Register 0"
bitfld.long 0x00 31. "P31,Group 0 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P30,Group 0 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P29,Group 0 interrupt active with priority level 29" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. "P28,Group 0 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.long 0x00 27. "P27,Group 0 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P26,Group 0 interrupt active with priority level 26" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. "P25,Group 0 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P24,Group 0 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.long 0x00 23. "P23,Group 0 interrupt active with priority level 23" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. "P22,Group 0 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P21,Group 0 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P20,Group 0 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P19,Group 0 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P18,Group 0 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P17,Group 0 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. "P16,Group 0 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.long 0x00 15. "P15,Group 0 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P14,Group 0 interrupt active with priority level 14" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. "P13,Group 0 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P12,Group 0 interrupt active with priority level 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "P11,Group 0 interrupt active with priority level 11" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. "P10,Group 0 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P9,Group 0 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P8,Group 0 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P7,Group 0 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P6,Group 0 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P5,Group 0 interrupt active with priority level 5" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. "P4,Group 0 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.long 0x00 3. "P3,Group 0 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P2,Group 0 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. "P1,Group 0 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P0,Group 0 interrupt active with priority level 0" "No interrupt,Interrupt"
group.long c15:0x009C++0x00
line.long 0x00 "ICC_AP1R0,Active Priorities 1 Register 0"
bitfld.long 0x00 31. "P31,Group 1 interrupt active with priority level 31" "No interrupt,Interrupt"
bitfld.long 0x00 30. "P30,Group 1 interrupt active with priority level 30" "No interrupt,Interrupt"
bitfld.long 0x00 29. "P29,Group 1 interrupt active with priority level 29" "No interrupt,Interrupt"
newline
bitfld.long 0x00 28. "P28,Group 1 interrupt active with priority level 28" "No interrupt,Interrupt"
bitfld.long 0x00 27. "P27,Group 1 interrupt active with priority level 27" "No interrupt,Interrupt"
bitfld.long 0x00 26. "P26,Group 1 interrupt active with priority level 26" "No interrupt,Interrupt"
newline
bitfld.long 0x00 25. "P25,Group 1 interrupt active with priority level 25" "No interrupt,Interrupt"
bitfld.long 0x00 24. "P24,Group 1 interrupt active with priority level 24" "No interrupt,Interrupt"
bitfld.long 0x00 23. "P23,Group 1 interrupt active with priority level 23" "No interrupt,Interrupt"
newline
bitfld.long 0x00 22. "P22,Group 1 interrupt active with priority level 22" "No interrupt,Interrupt"
bitfld.long 0x00 21. "P21,Group 1 interrupt active with priority level 21" "No interrupt,Interrupt"
bitfld.long 0x00 20. "P20,Group 1 interrupt active with priority level 20" "No interrupt,Interrupt"
newline
bitfld.long 0x00 19. "P19,Group 1 interrupt active with priority level 19" "No interrupt,Interrupt"
bitfld.long 0x00 18. "P18,Group 1 interrupt active with priority level 18" "No interrupt,Interrupt"
bitfld.long 0x00 17. "P17,Group 1 interrupt active with priority level 17" "No interrupt,Interrupt"
newline
bitfld.long 0x00 16. "P16,Group 1 interrupt active with priority level 16" "No interrupt,Interrupt"
bitfld.long 0x00 15. "P15,Group 1 interrupt active with priority level 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "P14,Group 1 interrupt active with priority level 14" "No interrupt,Interrupt"
newline
bitfld.long 0x00 13. "P13,Group 1 interrupt active with priority level 13" "No interrupt,Interrupt"
bitfld.long 0x00 12. "P12,Group 1 interrupt active with priority level 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "P11,Group 1 interrupt active with priority level 11" "No interrupt,Interrupt"
newline
bitfld.long 0x00 10. "P10,Group 1 interrupt active with priority level 10" "No interrupt,Interrupt"
bitfld.long 0x00 9. "P9,Group 1 interrupt active with priority level 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "P8,Group 1 interrupt active with priority level 8" "No interrupt,Interrupt"
newline
bitfld.long 0x00 7. "P7,Group 1 interrupt active with priority level 7" "No interrupt,Interrupt"
bitfld.long 0x00 6. "P6,Group 1 interrupt active with priority level 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "P5,Group 1 interrupt active with priority level 5" "No interrupt,Interrupt"
newline
bitfld.long 0x00 4. "P4,Group 1 interrupt active with priority level 4" "No interrupt,Interrupt"
bitfld.long 0x00 3. "P3,Group 1 interrupt active with priority level 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "P2,Group 1 interrupt active with priority level 2" "No interrupt,Interrupt"
newline
bitfld.long 0x00 1. "P1,Group 1 interrupt active with priority level 1" "No interrupt,Interrupt"
bitfld.long 0x00 0. "P0,Group 1 interrupt active with priority level 0" "No interrupt,Interrupt"
tree.end
newline
wgroup.quad c15:0x110C0++0x01
line.quad 0x00 "ICC_ASGI1R,Alternate SGI Generation Register 1"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List"
group.long c15:0x038C++0x00
line.long 0x00 "ICC_BPR0,Binary Point Register 0"
bitfld.long 0x00 0.--2. "BINARYPOINT,Binary point" "0,1,2,3,4,5,6,7"
group.long c15:0x03CC++0x00
line.long 0x00 "ICC_BPR1,Binary Point Register 1"
bitfld.long 0x00 0.--2. "BINARYPOINT,Binary point" "0,1,2,3,4,5,6,7"
group.long c15:0x04CC++0x00
line.long 0x00 "ICC_CTLR,Interrupt Control Registers for EL1"
rbitfld.long 0x00 19. "EXTRANGE,Extended INTID range" "Not supported,Supported"
rbitfld.long 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255"
newline
rbitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported"
rbitfld.long 0x00 14. "SEIS,SEI Support" "Not supported,Supported"
rbitfld.long 0x00 11.--13. "IDBITS,Number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
newline
rbitfld.long 0x00 8.--10. "PRIBITS,Number of priority bits implemented" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled"
bitfld.long 0x00 1. "EOIMODE,Alias of ICC_MCTLR.EOImode_EL1" "0,1"
newline
bitfld.long 0x00 0. "CBPR,Common Binary Point Register" "0,1"
group.long c15:0x64CC++0x00
line.long 0x00 "ICC_MCTLR,Interrupt Control Registers for EL3"
rbitfld.long 0x00 19. "EXTRANGE,Extended INTID range" "Not supported,Supported"
rbitfld.long 0x00 18. "RSS,Range selector support" "0 - 15,0 - 255"
newline
rbitfld.long 0x00 17. "NDS,Disable Security not supported" "Supported,Not supported"
rbitfld.long 0x00 15. "A3V,Affinity 3 Valid" "Not supported,Supported"
rbitfld.long 0x00 14. "SEIS,Indicates whether the CPU interface supports generation of SEIs" "Not supported,Supported"
newline
rbitfld.long 0x00 11.--13. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
rbitfld.long 0x00 8.--10. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6. "PMHE,Priority Mask Hint Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "EOIMODE_EL1NS,Controls whether a write to an End of Interrupt register also deactivates the interrupt(Non-secure EL1 and EL2)" "Enabled,Disabled"
bitfld.long 0x00 3. "EOIMODE_EL1S,Controls whether a write to an End of Interrupt register also deactivates the interrupt(Secure EL1)" "Enabled,Disabled"
bitfld.long 0x00 2. "EOIMODE_EL3,Controls whether a write to an End of Interrupt register also deactivates the interrupt(EL3)" "Enabled,Disabled"
newline
bitfld.long 0x00 1. "CBPR_EL1NS,Controls whether the same register is used for interrupt preemption of both Group 0 and Group 1 Non-secure interrupts at EL1" "Separate registers,Same register"
bitfld.long 0x00 0. "CBPR_EL1S,Controls whether the same register is used for interrupt preemption of both Group 0 and Group 1 Secure interrupts in Secure non-Monitor modes" "Separate registers,Same register"
wgroup.long c15:0x01BC++0x00
line.long 0x00 "ICC_DIR,Deactivate Interrupt Register"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID of the interrupt to be deactivated"
wgroup.long c15:0x018C++0x00
line.long 0x00 "ICC_EOIR0,End Of Interrupt Register 0"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR0 access"
wgroup.long c15:0x01CC++0x00
line.long 0x00 "ICC_EOIR1,End Of Interrupt Register 1"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID from the corresponding ICC_IAR1 access."
rgroup.long c15:0x028C++0x00
line.long 0x00 "ICC_HPPIR0,Highest Prioity Pending Interrupt Register 0"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt"
rgroup.long c15:0x02CC++0x00
line.long 0x00 "ICC_HPPIR1,Highest Prioity Pending Interrupt Register 1"
hexmask.long.tbyte 0x00 0.--23. 1. "INTID,The INTID of the highest priority pending interrupt"
hgroup.long c15:0x008C++0x00
hide.long 0x00 "ICC_IAR0,Interrupt Acknowledge Register 0"
in
hgroup.long c15:0x00CC++0x00
hide.long 0x00 "ICC_IAR1,Interrupt Acknowledge Register 1"
in
group.long c15:0x06CC++0x00
line.long 0x00 "ICC_IGRPEN0,Interrupt Group Enable Register 0"
bitfld.long 0x00 0. "ENABLE,Enables Group 0 interrupts" "Disabled,Enabled"
group.long c15:0x07CC++0x00
line.long 0x00 "ICC_IGRPEN1,Interrupt Group Enable Register 1"
bitfld.long 0x00 0. "ENABLE,Enables Group 1 interrupts" "Disabled,Enabled"
group.long c15:0x0064++0x00
line.long 0x00 "ICC_PMR,Priority Mask Register"
hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Priority mask level for the CPU interface"
rgroup.long c15:0x03BC++0x00
line.long 0x00 "ICC_RPR,Running Priority Register"
hexmask.long.byte 0x00 0.--7. 1. "PRIORITY,Current running priority on the CPU interface"
wgroup.quad c15:0x120C0++0x01
line.quad 0x00 "ICC_SGI0R,SGI Generation Register 0"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List"
wgroup.quad c15:0x100C0++0x01
line.quad 0x00 "ICC_SGI1R,SGI Generation Register 1"
hexmask.quad.byte 0x00 48.--55. 1. "AFF3,Affinity 3"
bitfld.quad 0x00 40. "IRM,Interrupt Routing Mode" "Disabled,Enabled"
hexmask.quad.byte 0x00 32.--39. 1. "AFF2,Affinity 2"
newline
bitfld.quad 0x00 24.--27. "INTID,The INTID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 16.--23. 1. "AFF1,Affinity 1"
hexmask.quad.word 0x00 0.--15. 1. "TARGETLIST,Target List"
group.long c15:0x05CC++0x00
line.long 0x00 "ICC_SRE,System Register Enable Register for EL1"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
group.long c15:0x65CC++0x00
line.long 0x00 "ICC_MSRE,System Register Enable Register for EL3"
bitfld.long 0x00 3. "ENABLE,Enable lower exception level access to ICC_SRE_EL1 and ICC_SRE_EL2" "Disabled,Enabled"
bitfld.long 0x00 2. "DIB,Disable IRQ bypass" "No,Yes"
bitfld.long 0x00 1. "DFB,Disable FIQ bypass" "No,Yes"
newline
bitfld.long 0x00 0. "SRE,System Register Enable" "Disabled,Enabled"
group.long c15:0x67CC++0x00
line.long 0x00 "ICC_MGRPEN1,Monitor Group1 Interrupt Group Enable"
bitfld.long 0x00 1. "ENABLEGRP1S,Enables Group 1 interrupts for the Secure state" "Disabled,Enabled"
bitfld.long 0x00 0. "ENABLEGRP1NS,Enables Group 1 interrupts for the Non-secure state" "Disabled,Enabled"
tree.end
tree "AArch32 Virtual Interface Control System Registers"
tree.open "Interrupt Controller Hypervisor Active Priorities Registers"
group.long c15:0x408C++0x00
line.long 0x00 "ICH_AP0R0,Interrupt Controller Hypervisor Active Priorities Register 0-0"
bitfld.long 0x00 31. "P31,Group 0 interrupt active priority 31" "0,1"
bitfld.long 0x00 30. "P30,Group 0 interrupt active priority 30" "0,1"
bitfld.long 0x00 29. "P29,Group 0 interrupt active priority 29" "0,1"
bitfld.long 0x00 28. "P28,Group 0 interrupt active priority 28" "0,1"
newline
bitfld.long 0x00 27. "P27,Group 0 interrupt active priority 27" "0,1"
bitfld.long 0x00 26. "P26,Group 0 interrupt active priority 26" "0,1"
bitfld.long 0x00 25. "P25,Group 0 interrupt active priority 25" "0,1"
bitfld.long 0x00 24. "P24,Group 0 interrupt active priority 24" "0,1"
newline
bitfld.long 0x00 23. "P23,Group 0 interrupt active priority 23" "0,1"
bitfld.long 0x00 22. "P22,Group 0 interrupt active priority 22" "0,1"
bitfld.long 0x00 21. "P21,Group 0 interrupt active priority 21" "0,1"
bitfld.long 0x00 20. "P20,Group 0 interrupt active priority 20" "0,1"
newline
bitfld.long 0x00 19. "P19,Group 0 interrupt active priority 19" "0,1"
bitfld.long 0x00 18. "P18,Group 0 interrupt active priority 18" "0,1"
bitfld.long 0x00 17. "P17,Group 0 interrupt active priority 17" "0,1"
bitfld.long 0x00 16. "P16,Group 0 interrupt active priority 16" "0,1"
newline
bitfld.long 0x00 15. "P15,Group 0 interrupt active priority 15" "0,1"
bitfld.long 0x00 14. "P14,Group 0 interrupt active priority 14" "0,1"
bitfld.long 0x00 13. "P13,Group 0 interrupt active priority 13" "0,1"
bitfld.long 0x00 12. "P12,Group 0 interrupt active priority 12" "0,1"
newline
bitfld.long 0x00 11. "P11,Group 0 interrupt active priority 11" "0,1"
bitfld.long 0x00 10. "P10,Group 0 interrupt active priority 10" "0,1"
bitfld.long 0x00 9. "P9,Group 0 interrupt active priority 9" "0,1"
bitfld.long 0x00 8. "P8,Group 0 interrupt active priority 8" "0,1"
newline
bitfld.long 0x00 7. "P7,Group 0 interrupt active priority 7" "0,1"
bitfld.long 0x00 6. "P6,Group 0 interrupt active priority 6" "0,1"
bitfld.long 0x00 5. "P5,Group 0 interrupt active priority 5" "0,1"
bitfld.long 0x00 4. "P4,Group 0 interrupt active priority 4" "0,1"
newline
bitfld.long 0x00 3. "P3,Group 0 interrupt active priority 3" "0,1"
bitfld.long 0x00 2. "P2,Group 0 interrupt active priority 2" "0,1"
bitfld.long 0x00 1. "P1,Group 0 interrupt active priority 1" "0,1"
bitfld.long 0x00 0. "P0,Group 0 interrupt active priority 0" "0,1"
group.long c15:0x409C++0x00
line.long 0x00 "ICH_AP1R0,Interrupt Controller Hypervisor Active Priorities Register 1-0"
bitfld.long 0x00 31. "P31,Group 1 interrupt active priority 31" "0,1"
bitfld.long 0x00 30. "P30,Group 1 interrupt active priority 30" "0,1"
bitfld.long 0x00 29. "P29,Group 1 interrupt active priority 29" "0,1"
bitfld.long 0x00 28. "P28,Group 1 interrupt active priority 28" "0,1"
newline
bitfld.long 0x00 27. "P27,Group 1 interrupt active priority 27" "0,1"
bitfld.long 0x00 26. "P26,Group 1 interrupt active priority 26" "0,1"
bitfld.long 0x00 25. "P25,Group 1 interrupt active priority 25" "0,1"
bitfld.long 0x00 24. "P24,Group 1 interrupt active priority 24" "0,1"
newline
bitfld.long 0x00 23. "P23,Group 1 interrupt active priority 23" "0,1"
bitfld.long 0x00 22. "P22,Group 1 interrupt active priority 22" "0,1"
bitfld.long 0x00 21. "P21,Group 1 interrupt active priority 21" "0,1"
bitfld.long 0x00 20. "P20,Group 1 interrupt active priority 20" "0,1"
newline
bitfld.long 0x00 19. "P19,Group 1 interrupt active priority 19" "0,1"
bitfld.long 0x00 18. "P18,Group 1 interrupt active priority 18" "0,1"
bitfld.long 0x00 17. "P17,Group 1 interrupt active priority 17" "0,1"
bitfld.long 0x00 16. "P16,Group 1 interrupt active priority 16" "0,1"
newline
bitfld.long 0x00 15. "P15,Group 1 interrupt active priority 15" "0,1"
bitfld.long 0x00 14. "P14,Group 1 interrupt active priority 14" "0,1"
bitfld.long 0x00 13. "P13,Group 1 interrupt active priority 13" "0,1"
bitfld.long 0x00 12. "P12,Group 1 interrupt active priority 12" "0,1"
newline
bitfld.long 0x00 11. "P11,Group 1 interrupt active priority 11" "0,1"
bitfld.long 0x00 10. "P10,Group 1 interrupt active priority 10" "0,1"
bitfld.long 0x00 9. "P9,Group 1 interrupt active priority 9" "0,1"
bitfld.long 0x00 8. "P8,Group 1 interrupt active priority 8" "0,1"
newline
bitfld.long 0x00 7. "P7,Group 1 interrupt active priority 7" "0,1"
bitfld.long 0x00 6. "P6,Group 1 interrupt active priority 6" "0,1"
bitfld.long 0x00 5. "P5,Group 1 interrupt active priority 5" "0,1"
bitfld.long 0x00 4. "P4,Group 1 interrupt active priority 4" "0,1"
newline
bitfld.long 0x00 3. "P3,Group 1 interrupt active priority 3" "0,1"
bitfld.long 0x00 2. "P2,Group 1 interrupt active priority 2" "0,1"
bitfld.long 0x00 1. "P1,Group 1 interrupt active priority 1" "0,1"
bitfld.long 0x00 0. "P0,Group 1 interrupt active priority 0" "0,1"
tree.end
newline
rgroup.long c15:0x43BC++0x00
line.long 0x00 "ICH_EISR,Interrupt Controller End of Interrupt Status Register"
bitfld.long 0x00 3. "STATUS3,EOI maintenance interrupt status bit for List register 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "STATUS2,EOI maintenance interrupt status bit for List register 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "STATUS1,EOI maintenance interrupt status bit for List register 1" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. "STATUS0,EOI maintenance interrupt status bit for List register 0" "No interrupt,Interrupt"
rgroup.long c15:0x45BC++0x00
line.long 0x00 "ICH_ELRSR,Interrupt Controller Empty List Register Status Register"
bitfld.long 0x00 3. "STATUS3,Status bit for List register 3" "Interrupt,No interrupt"
bitfld.long 0x00 2. "STATUS2,Status bit for List register 2" "Interrupt,No interrupt"
bitfld.long 0x00 1. "STATUS1,Status bit for List register 1" "Interrupt,No interrupt"
newline
bitfld.long 0x00 0. "STATUS0,Status bit for List register 0" "Interrupt,No interrupt"
group.long c15:0x40BC++0x00
line.long 0x00 "ICH_HCR,Interrupt Controller Hypervisor Control Register"
bitfld.long 0x00 27.--31. "EOICOUNT,This field is incremented whenever a successful write to a virtual EOIR or DIR register would have resulted in a virtual interrupt deactivation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 14. "TDIR,Trap Non-secure EL1 writes to ICC_DIR" "Not trapped,Trapped"
bitfld.long 0x00 13. "TSEI,Trap all locally generated SEIs" "Not trapped,Trapped"
newline
bitfld.long 0x00 12. "TALL1,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 1 interrupts to EL2" "Not trapped,Trapped"
bitfld.long 0x00 11. "TALL0,Trap all Non-secure EL1 accesses to ICC_* System registers for Group 0 interrupts to EL2" "Not trapped,Trapped"
bitfld.long 0x00 10. "TC,Trap all Non-secure EL1 accesses to System registers that are common to Group 0 and Group 1 to EL2" "Not trapped,Trapped"
newline
bitfld.long 0x00 7. "VGRP1DIE,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 6. "VGRP1EIE,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 5. "VGRP0DIE,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "VGRP0EIE,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "NPIE,No Pending Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 2. "LRENPIE,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "UIE,Underflow Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 0. "EN,Global enable bit for the virtual CPU interface" "Disabled,Enabled"
group.long c15:(0x40CC+0x0)++0x00
line.long 0x00 "ICH_LR0,Interrupt Controller List Register 0"
hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
group.long c15:(0x40CC+0x100)++0x00
line.long 0x00 "ICH_LR1,Interrupt Controller List Register 1"
hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
group.long c15:(0x40CC+0x200)++0x00
line.long 0x00 "ICH_LR2,Interrupt Controller List Register 2"
hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
group.long c15:(0x40CC+0x300)++0x00
line.long 0x00 "ICH_LR3,Interrupt Controller List Register 3"
hexmask.long 0x00 0.--31. 1. "vINTID,Virtual INTID of the interrupt"
group.long c15:(0x40EC+0x0)++0x00
line.long 0x00 "ICH_LRC0,Interrupt Controller List Register Extension 0"
bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt"
bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0"
newline
hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
group.long c15:(0x40EC+0x100)++0x00
line.long 0x00 "ICH_LRC1,Interrupt Controller List Register Extension 1"
bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt"
bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0"
newline
hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
group.long c15:(0x40EC+0x200)++0x00
line.long 0x00 "ICH_LRC2,Interrupt Controller List Register Extension 2"
bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt"
bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0"
newline
hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
group.long c15:(0x40EC+0x300)++0x00
line.long 0x00 "ICH_LRC3,Interrupt Controller List Register Extension 3"
bitfld.long 0x00 30.--31. "STATE,The state of the interrupt" "Inactive,Pending,Active,Pending and active"
bitfld.long 0x00 29. "HW,Indicates whether this virtual interrupt maps directly to a hardware interrupt, meaning that it corresponds to a physical interrupt." "Triggered by Software,Hardware interrupt"
bitfld.long 0x00 28. "GROUP,Indicates the group for this virtual interrupt" "Group 1,Group 0"
newline
hexmask.long.byte 0x00 16.--23. 1. "PRIORITY,The priority of this interrupt"
hexmask.long.word 0x00 0.--9. 1. "PINTID,Physical INTID for hardware interrupts"
rgroup.long c15:0x42BC++0x00
line.long 0x00 "ICH_MISR,Interrupt Controller Maintenance Interrupt State Register"
bitfld.long 0x00 7. "VGRP1D,VPE Group 1 Disabled" "Not asserted,Asserted"
bitfld.long 0x00 6. "VGRP1E,VPE Group 1 Enabled" "Not asserted,Asserted"
bitfld.long 0x00 5. "VGRP0D,VPE Group 0 Disabled" "Not asserted,Asserted"
newline
bitfld.long 0x00 4. "VGRP0E,VPE Group 0 Enabled" "Not asserted,Asserted"
bitfld.long 0x00 3. "NP,No Pending" "Not asserted,Asserted"
bitfld.long 0x00 2. "LRENP,List Register Entry Not Present" "Not asserted,Asserted"
newline
bitfld.long 0x00 1. "U,Underflow" "Not asserted,Asserted"
bitfld.long 0x00 0. "EOI,End Of Interrupt" "Not asserted,Asserted"
group.long c15:0x459C++0x00
line.long 0x00 "ICH_SRE,Hypervisor System Register"
group.long c15:0x47BC++0x00
line.long 0x00 "ICH_VMCR,Interrupt Controller Virtual Machine Control Register"
hexmask.long.byte 0x00 24.--31. 1. "VPMR,The priority mask level for the virtual CPU interface"
bitfld.long 0x00 21.--23. "VBPR0,Virtual Binary Point Register Group 0" "[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0],No preemption-[7:0]"
bitfld.long 0x00 18.--20. "VBPR1,Virtual Binary Point Register, Group 1" ",[7:1]-[0],[7:2]-[1:0],[7:3]-[2:0],[7:4]-[3:0],[7:5]-[4:0],[7:6]-[5:0],[7]-[6:0]"
newline
bitfld.long 0x00 9. "VEOIM,Controls whether a write to an End of Interrupt register also deactivates the virtual interrupt" "Disabled,Enabled"
bitfld.long 0x00 4. "VCBPR,Virtual Common Binary Point Register" "Separate registers,Same register"
bitfld.long 0x00 3. "VFIQEN,Virtual FIQ enable" "Virtual IRQs,Virtual FIQs"
newline
bitfld.long 0x00 2. "VACKCTL,Virtual FIQ enable" "1022,Corresponding interrupt"
bitfld.long 0x00 1. "VENG1,Virtual Group 1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "VENG0,Virtual Group 0 interrupt enable" "Disabled,Enabled"
group.long c15:0x449C++0x00
line.long 0x00 "ICH_VSEIR,Virtual System Error Interrupt Register"
rgroup.long c15:0x41BC++0x00
line.long 0x00 "ICH_VTR,Interrupt Controller VGIC Type Register"
bitfld.long 0x00 29.--31. "PRIBITS,The number of priority bits implemented minus one" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 26.--28. "PREBITS,The number of virtual preemption bits implemented, minus one" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 23.--25. "IDBITS,The number of physical interrupt identifier bits supported" "16 bits,24 bits,?..."
newline
bitfld.long 0x00 22. "SEIS,Indicates whether the CPU interface supports local generation of SEIs" "Not supported,Supported"
bitfld.long 0x00 21. "A3V,Affinity 3 Valid" "Only zero values supported,Non-zero values supported"
bitfld.long 0x00 20. "NV4,GICv4 direct injection of virtual interrupts not supported" "Supported,Not supported"
newline
bitfld.long 0x00 19. "TDS,Separate trapping of Non-secure EL1 writes to ICV_DIR_EL1 supported" "Not supported,Supported"
bitfld.long 0x00 0.--4. "LISTREGS,The number of implemented List registers, minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
tree.end
tree.end
tree "Debug Registers"
tree "Coresight Management Registers"
rgroup.long c14:0x0000++0x0
line.long 0x0 "DBGDIDR,Debug ID Register"
bitfld.long 0x0 28.--31. "WRP,Number of Watchpoint Register Pairs" "Reserved,Reserved,Reserved,4,?..."
bitfld.long 0x0 24.--27. "BRP,Number of Breakpoint Register Pairs" "Reserved,Reserved,Reserved,Reserved,Reserved,6,?..."
bitfld.long 0x0 20.--23. "CTX_CMP,Number of BRPs with Context ID Comparison Capability" "Reserved,2,?..."
newline
bitfld.long 0x0 16.--19. "VERSION,Debug Architecture Version" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,ARMv8,?..."
bitfld.long 0x0 14. "NSUHD,Secure User halting debug-mode" "Reserved,Not implemented"
bitfld.long 0x0 12. "SE,Security Extensions implemented" "Reserved,Implemented"
group.long c14:0x0070++0x0
line.long 0x00 "DBGVCR,Debug Vector Catch register"
bitfld.long 0x00 31. "FIQVCE_NS,FIQ vector catch in Non-secure state" "Disabled,Enabled"
bitfld.long 0x00 30. "IRQVCE_NS,IRG vector catch in Non-secure state" "Disabled,Enabled"
bitfld.long 0x00 28. "DAVCE_NS,Data Abort vector catch in Non-secure state" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "PAVCE_NS,Prefetch Abort vector catch in Non-secure state" "Disabled,Enabled"
bitfld.long 0x00 26. "SVCVCE_NS,SVC vector catch in Non-secure state" "Disabled,Enabled"
bitfld.long 0x00 25. "UIVCE_NS,Undefined instruction vector catch in Non-secure state" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "FIQVCE_SM,FIQ vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled"
bitfld.long 0x00 14. "IRQVCE_SM,IRQ vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled"
bitfld.long 0x00 12. "DAVCE_SM,Data Abort vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "PAVCE_SM,Prefetch Abort vector catch enable in Secure state on Monitor mode vector" "Disabled,Enabled"
bitfld.long 0x00 10. "SMCVCE_S,SMC vector catch enable in Secure state" "Disabled,Enabled"
bitfld.long 0x00 7. "FIQVCE_S,FIQ vector catch in Secure state" "Disabled,Enabled"
newline
bitfld.long 0x00 6. "IRQVCE_S,IRG vector catch in Secure state" "Disabled,Enabled"
bitfld.long 0x00 4. "DAVCE_S,Data Abort vector catch in Secure state" "Disabled,Enabled"
bitfld.long 0x00 3. "PAVCE_S,Prefetch Abort vector catch in Secure state" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "SVCVCE_S,SVC vector catch in Secure state" "Disabled,Enabled"
bitfld.long 0x00 1. "UIVCE_S,Undefined instruction vector catch in Secure state" "Disabled,Enabled"
group.long c14:0x0020++0x00
line.long 0x00 "DBGDCCINT,DCC Interrupt Enable Register"
bitfld.long 0x00 30. "RX,DCC interrupt request enable control for DTRRX" "Disabled,Enabled"
bitfld.long 0x00 29. "TX,DCC interrupt request enable control for DTRTX" "Disabled,Enabled"
group.long c14:0x0200++0x0
line.long 0x00 "DBGDTRRXEXT,Debug Receive Register (External View)"
hgroup.long c14:0x0050++0x0
hide.long 0x00 "DBGDTRRXINT,Debug Receive Register (Internal View)"
in
group.long c14:0x0220++0x0
line.long 0x00 "DBGDSCREXT,Debug Status and Control Register (External View)"
bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full"
bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full"
bitfld.long 0x00 27. "RXO,Used for save/restore of EDSCR.RXO" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "TXU,Used for save/restore of EDSCR.TXU" "Disabled,Enabled"
bitfld.long 0x00 22.--23. "INTDIS,Used for save/restore of EDSCR.INTdis" "0,1,2,3"
bitfld.long 0x00 21. "TDA,Used for save/restore of EDSCR.TDA" "Disabled,Enabled"
newline
bitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure"
bitfld.long 0x00 17. "SPNIDDIS,Secure Privileged Non-Invasive Debug Disable" "No,Yes"
bitfld.long 0x00 16. "SPIDDIS,Secure Privileged Invasive Debug Disable" "No,Yes"
newline
bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled"
bitfld.long 0x00 14. "HDE,Used for save/restore of EDSCR.HDE" "Disabled,Enabled"
bitfld.long 0x00 12. "UDCCDIS,User mode access to Communications Channel disable" "No,Yes"
newline
bitfld.long 0x00 6. "ERR,Used for save/restore of EDSCR.ERR" "Disabled,Enabled"
bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,BKPT Instruction,Reserved,Vector Catch,Reserved,Reserved,Reserved,Reserved,Synchronous Watchpoint,?..."
rgroup.long c14:0x0010++0x0
line.long 0x00 "DBGDSCRINT,Debug Status and Control Register (Internal View)"
bitfld.long 0x00 30. "RXFULL,DBGDTRRX Register full" "Empty,Full"
bitfld.long 0x00 29. "TXFULL,DBGDTRTX Register full" "Empty,Full"
bitfld.long 0x00 18. "NS,Non-secure status bit" "Secure,Non-secure"
newline
bitfld.long 0x00 17. "SPNIDDIS,Secure Privileged Non-Invasive Debug Disable" "No,Yes"
bitfld.long 0x00 16. "SPIDDIS,Secure Privileged Invasive Debug Disable" "No,Yes"
bitfld.long 0x00 15. "MDBGEN,Monitor debug-mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "UDCCDIS,User mode access to Communications Channel disable" "No,Yes"
bitfld.long 0x00 2.--5. "MOE,Method of debug entry field" "Reserved,Breakpoint,Reserved,BKPT Instruction,Reserved,Vector Catch,Reserved,Reserved,Reserved,Reserved,Synchronous Watchpoint,?..."
wgroup.long c14:0x0230++0x0
line.long 0x00 "DBGDTRTXEXT,Debug Transmit Register (External View)"
group.long c14:0x0050++0x0
line.long 0x00 "DBGDTRTXINT,Debug Transmit/Receive Register (Internal View)"
group.long c14:0x0687++0x0
line.long 0x0 "DBGCLAIMSET,Claim Tag Set Register"
bitfld.long 0x0 7. "CT7,Claim Tag 7 Set" "Not set,Set"
bitfld.long 0x0 6. "CT6,Claim Tag 6 Set" "Not set,Set"
bitfld.long 0x0 5. "CT5,Claim Tag 5 Set" "Not set,Set"
newline
bitfld.long 0x0 4. "CT4,Claim Tag 4 Set" "Not set,Set"
bitfld.long 0x0 3. "CT3,Claim Tag 3 Set" "Not set,Set"
bitfld.long 0x0 2. "CT2,Claim Tag 2 Set" "Not set,Set"
newline
bitfld.long 0x0 1. "CT1,Claim Tag 1 Set" "Not set,Set"
bitfld.long 0x0 0. "CT0,Claim Tag 0 Set" "Not set,Set"
group.long c14:0x0697++0x0
line.long 0x0 "DBGCLAIMCLR,Claim Tag Clear Register"
bitfld.long 0x0 7. "CT7,Claim Tag 7 Clear" "Not cleared,Cleared"
bitfld.long 0x0 6. "CT6,Claim Tag 6 Clear" "Not cleared,Cleared"
bitfld.long 0x0 5. "CT5,Claim Tag 5 Clear" "Not cleared,Cleared"
newline
bitfld.long 0x0 4. "CT4,Claim Tag 4 Clear" "Not cleared,Cleared"
bitfld.long 0x0 3. "CT3,Claim Tag 3 Clear" "Not cleared,Cleared"
bitfld.long 0x0 2. "CT2,Claim Tag 2 Clear" "Not cleared,Cleared"
newline
bitfld.long 0x0 1. "CT1,Claim Tag 1 Clear" "Not cleared,Cleared"
bitfld.long 0x0 0. "CT0,Claim Tag 0 Clear" "Not cleared,Cleared"
if (((per.l(c14:0x06E7))&0xAA)==0xAA)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.l(c14:0x06E7))&0xAA)==0xA8)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.l(c14:0x06E7))&0xAA)==0xA2)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.l(c14:0x06E7))&0xAA)==0xA0)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.l(c14:0x06E7))&0xAA)==0x8A)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.l(c14:0x06E7))&0xAA)==0x88)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.l(c14:0x06E7))&0xAA)==0x82)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.l(c14:0x06E7))&0xAA)==0x80)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 6. "SNE,Secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.l(c14:0x06E7))&0xAA)==0x2A)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.l(c14:0x06E7))&0xAA)==0x28)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.l(c14:0x06E7))&0xAA)==0x22)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.l(c14:0x06E7))&0xAA)==0x20)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 4. "SE,Secure invasive debug enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.l(c14:0x06E7))&0xAA)==0x0A)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.l(c14:0x06E7))&0xAA)==0x08)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 2. "NSNE,Non-secure non-invasive debug enabled" "Disabled,Enabled"
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
elif (((per.l(c14:0x06E7))&0xAA)==0x02)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 0. "NSE,Non-secure invasive debug enabled" "Disabled,Enabled"
elif (((per.l(c14:0x06E7))&0xAA)==0x00)
rgroup.long c14:0x06E7++0x00
line.long 0x00 "DBGAUTHSTATUS,Authentication Status register"
bitfld.long 0x00 7. "SNI,Secure non-invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 5. "SI,Secure invasive debug implemented" "Not implemented,Implemented"
bitfld.long 0x00 3. "NSNI,Non-secure non-invasive debug implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 1. "NSI,Non-secure invasive debug implemented" "Not implemented,Implemented"
endif
rgroup.long c14:0x0707++0x0
line.long 0x0 "DBGDEVID2,Debug Device ID Register 2"
rgroup.long c14:0x0717++0x0
line.long 0x0 "DBGDEVID1,Debug Device ID Register 1"
bitfld.long 0x00 0.--3. "PCSROFFSET,This field defines the offset applied to DBGPCSR samples" ",,No offset,?..."
rgroup.long c14:0x0727++0x00
line.long 0x00 "DBGDEVID,Debug Device ID Register 0"
bitfld.long 0x00 28.--31. "CIDMASK,Specifies the level of support for the Context ID matching breakpoint masking capability" "Not implemented,?..."
bitfld.long 0x00 24.--27. "AUXREGS,Specifies support for the Debug External Auxiliary Control Register" ",Supported,?..."
bitfld.long 0x00 20.--23. "DOUBLELOCK,Specifies support for the Debug OS Double Lock Register" "Reserved,Implemented,?..."
newline
bitfld.long 0x00 16.--19. "VIREXTNS,Specifies whether EL2 is implemented" "Reserved,Implemented,?..."
bitfld.long 0x00 12.--15. "VECTORCATCH,Defines the form of the vector catch event implemented" "Implemented,?..."
bitfld.long 0x00 8.--11. "BPADDRMASK,Indicates the level of support for the Immediate Virtual Address(IVA) matching breakpoint masking capability" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not implemented"
newline
bitfld.long 0x00 4.--7. "WPADDRMASK,Indicates the level of support for the DVA matching watchpoint masking capability" "Reserved,Implemented,?..."
bitfld.long 0x00 0.--3. "PCSAMPLE,Indicates the level of support for Program Counter sampling using debug registers 40 and 41" "Reserved,Reserved,Reserved,Implemented,?..."
tree.end
newline
rgroup.quad c14:0x10010++0x1
line.quad 0x0 "DBGDRAR,Debug ROM Address Register"
hexmask.quad 0x0 12.--47. 0x10 "ROMADDR,ROM physical address"
bitfld.quad 0x0 0.--1. "VALID,ROM table address valid" "Not valid,,,Valid"
rgroup.quad c14:0x10020++0x1
line.quad 0x0 "DBGDSAR,Debug Self Address Offset Register"
wgroup.long c14:0x0401++0x00
line.long 0x00 "DBGOSLAR,Operating System Lock Access Register"
rgroup.long c14:0x0411++0x00
line.long 0x00 "DBGOSLSR,Operating System Lock Status Register"
bitfld.long 0x00 2. "NTT,32-Bit Access" "Not required,Required"
bitfld.long 0x00 1. "OSLK,Status of the OS Lock" "Not locked,Locked"
bitfld.long 0x00 0. 3. "OSLM,OS Lock Model implemented Bit" "Reserved,Reserved,Implemented,?..."
if (((per.l(c14:0x0411))&0x2)==0x2)
group.long c14:0x0260++0x00
line.long 0x00 "DBGOSECCR,Debug OS Lock Exception Catch Control Register"
else
hgroup.long c14:0x0260++0x00
hide.long 0x00 "DBGOSECCR,Debug OS Lock Exception Catch Control Register"
endif
group.long c14:0x0431++0x00
line.long 0x00 "DBGOSDLR,Debug OS Double Lock Register"
bitfld.long 0x00 0. "DLK,OS Double Lock control bit" "Not locked,Locked"
group.long c14:0x0441++0x00
line.long 0x00 "DBGPRCR,Device Power-Down and Reset Control Register"
bitfld.long 0x00 0. "CORENPDRQ,Core No Power down Request" "Power down,Emulate"
tree.end
tree "Breakpoint Registers"
tree "Breakpoint 0"
if (((per.l(c14:(0x500+0x0)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x0)++0x0
line.long 0x00 "DBGBVR0,Breakpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x0)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
hgroup.long c14:(0x0400+0x0)++0x0
hide.long 0x00 "DBGBVR0,Breakpoint Value Register"
else
group.long c14:(0x0400+0x0)++0x0
line.long 0x00 "DBGBVR0,Breakpoint ContextID Register"
endif
group.long c14:(0x0500+0x0)++0x0
line.long 0x00 "DBGBCR0,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,?..."
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
tree.end
tree "Breakpoint 1"
if (((per.l(c14:(0x500+0x10)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x10)++0x0
line.long 0x00 "DBGBVR1,Breakpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x10)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
hgroup.long c14:(0x0400+0x10)++0x0
hide.long 0x00 "DBGBVR1,Breakpoint Value Register"
else
group.long c14:(0x0400+0x10)++0x0
line.long 0x00 "DBGBVR1,Breakpoint ContextID Register"
endif
group.long c14:(0x0500+0x10)++0x0
line.long 0x00 "DBGBCR1,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,?..."
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
tree.end
tree "Breakpoint 2"
if (((per.l(c14:(0x500+0x20)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x20)++0x0
line.long 0x00 "DBGBVR2,Breakpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x20)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
hgroup.long c14:(0x0400+0x20)++0x0
hide.long 0x00 "DBGBVR2,Breakpoint Value Register"
else
group.long c14:(0x0400+0x20)++0x0
line.long 0x00 "DBGBVR2,Breakpoint ContextID Register"
endif
group.long c14:(0x0500+0x20)++0x0
line.long 0x00 "DBGBCR2,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,?..."
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
tree.end
tree "Breakpoint 3"
if (((per.l(c14:(0x500+0x30)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x30)++0x0
line.long 0x00 "DBGBVR3,Breakpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x30)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
hgroup.long c14:(0x0400+0x30)++0x0
hide.long 0x00 "DBGBVR3,Breakpoint Value Register"
else
group.long c14:(0x0400+0x30)++0x0
line.long 0x00 "DBGBVR3,Breakpoint ContextID Register"
endif
group.long c14:(0x0500+0x30)++0x0
line.long 0x00 "DBGBCR3,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,?..."
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
tree.end
tree "Breakpoint 4"
if (((per.l(c14:(0x500+0x40)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x40)++0x0
line.long 0x00 "DBGBVR4,Breakpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x40)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
hgroup.long c14:(0x0400+0x40)++0x0
hide.long 0x00 "DBGBVR4,Breakpoint Value Register"
else
group.long c14:(0x0400+0x40)++0x0
line.long 0x00 "DBGBVR4,Breakpoint ContextID Register"
endif
if (((per.l(c14:(0x500+0x40)))&0x800000)==0x800000)
group.long c14:(0x0101+0x40)++0x0
line.long 0x00 "DBGBXVR4,Breakpoint Extended Value Register"
hexmask.long.byte 0x00 0.--7. 1. "VAMID,VMID value for comparison"
else
hgroup.long c14:(0x0101+0x40)++0x0
hide.long 0x00 "DBGBXVR4,Breakpoint Extended Value Register"
endif
group.long c14:(0x0500+0x40)++0x0
line.long 0x00 "DBGBCR4,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,?..."
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
tree.end
tree "Breakpoint 5"
if (((per.l(c14:(0x500+0x50)))&0xF00000)==(0x000000||0x100000||0x400000||0x500000))
group.long c14:(0x0400+0x50)++0x0
line.long 0x00 "DBGBVR5,Breakpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "VA,Bits[31:2] of the address value for comparison"
elif (((per.l(c14:(0x500+0x50)))&0xF00000)==(0x800000||0x900000||0xC00000||0xD00000))
hgroup.long c14:(0x0400+0x50)++0x0
hide.long 0x00 "DBGBVR5,Breakpoint Value Register"
else
group.long c14:(0x0400+0x50)++0x0
line.long 0x00 "DBGBVR5,Breakpoint ContextID Register"
endif
if (((per.l(c14:(0x500+0x50)))&0x800000)==0x800000)
group.long c14:(0x0101+0x50)++0x0
line.long 0x00 "DBGBXVR5,Breakpoint Extended Value Register"
hexmask.long.byte 0x00 0.--7. 1. "VAMID,VMID value for comparison"
else
hgroup.long c14:(0x0101+0x50)++0x0
hide.long 0x00 "DBGBXVR5,Breakpoint Extended Value Register"
endif
group.long c14:(0x0500+0x50)++0x0
line.long 0x00 "DBGBCR5,Breakpoint Control Register"
bitfld.long 0x00 22. "BT[2],Mismatch" "Match,Mismatch"
bitfld.long 0x00 21. 23. "BT[31],Base type" "Address,Context ID,VMID,VMID and context ID"
bitfld.long 0x00 20. "BT[0],Enable linking" "Disabled,Enabled"
newline
bitfld.long 0x00 16.--19. "LBRPN,Linked BRP number" "0,1,2,3,?..."
bitfld.long 0x00 14.--15. "SSC,Security state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x00 13. "HMC,Hyp mode control" "Not matched,Matched"
newline
bitfld.long 0x0 5.--8. "BAS,Byte address select" "0b0000,0b0001,0b0010,0b0011,0b0100,0b0101,0b0110,0b0111,0b1000,0b1001,0b1010,0b1011,0b1100,0b1101,0b1110,0b1111"
bitfld.long 0x00 1.--2. "PMC,Privileged mode control" "User/System/Supervisor,Privileged,User only,Any mode"
bitfld.long 0x00 0. "BE,Breakpoint enable" "Disabled,Enabled"
tree.end
tree.end
tree "Watchpoint Control Registers"
tree "Watchpoint 0"
group.long c14:(0x0600+0x0)++0x00
line.long 0x00 "DBGWVR0,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "DA,Data address"
group.long c14:(0x0700+0x0)++0x00
line.long 0x00 "DBGWCR0,Watchpoint Control Register"
bitfld.long 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.long 0x0 20. "WT,Watchpoint Type" "Unlinked,Linked"
bitfld.long 0x0 16.--19. "LBN,Linked BRP number" "BRP0,BRP1,BRP2,BRP3,BRP4,BRP5,?..."
newline
bitfld.long 0x0 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x0 13. "HMC,Hyp Mode Control" "Disabled,Enabled"
hexmask.long.byte 0x0 5.--12. "BAS,Byte address select"
newline
bitfld.long 0x0 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any"
bitfld.long 0x0 1.--2. "PAC,Privileged Access control" "Reserved,Match privileged accesses,Match unprivileged accesses,Match all accesses"
bitfld.long 0x0 0. "WE,Watchpoint enable" "Disabled,Enabled"
tree.end
tree "Watchpoint 1"
group.long c14:(0x0600+0x10)++0x00
line.long 0x00 "DBGWVR1,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "DA,Data address"
group.long c14:(0x0700+0x10)++0x00
line.long 0x00 "DBGWCR1,Watchpoint Control Register"
bitfld.long 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.long 0x0 20. "WT,Watchpoint Type" "Unlinked,Linked"
bitfld.long 0x0 16.--19. "LBN,Linked BRP number" "BRP0,BRP1,BRP2,BRP3,BRP4,BRP5,?..."
newline
bitfld.long 0x0 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x0 13. "HMC,Hyp Mode Control" "Disabled,Enabled"
hexmask.long.byte 0x0 5.--12. "BAS,Byte address select"
newline
bitfld.long 0x0 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any"
bitfld.long 0x0 1.--2. "PAC,Privileged Access control" "Reserved,Match privileged accesses,Match unprivileged accesses,Match all accesses"
bitfld.long 0x0 0. "WE,Watchpoint enable" "Disabled,Enabled"
tree.end
tree "Watchpoint 2"
group.long c14:(0x0600+0x20)++0x00
line.long 0x00 "DBGWVR2,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "DA,Data address"
group.long c14:(0x0700+0x20)++0x00
line.long 0x00 "DBGWCR2,Watchpoint Control Register"
bitfld.long 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.long 0x0 20. "WT,Watchpoint Type" "Unlinked,Linked"
bitfld.long 0x0 16.--19. "LBN,Linked BRP number" "BRP0,BRP1,BRP2,BRP3,BRP4,BRP5,?..."
newline
bitfld.long 0x0 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x0 13. "HMC,Hyp Mode Control" "Disabled,Enabled"
hexmask.long.byte 0x0 5.--12. "BAS,Byte address select"
newline
bitfld.long 0x0 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any"
bitfld.long 0x0 1.--2. "PAC,Privileged Access control" "Reserved,Match privileged accesses,Match unprivileged accesses,Match all accesses"
bitfld.long 0x0 0. "WE,Watchpoint enable" "Disabled,Enabled"
tree.end
tree "Watchpoint 3"
group.long c14:(0x0600+0x30)++0x00
line.long 0x00 "DBGWVR3,Watchpoint Value Register"
hexmask.long 0x00 2.--31. 0x4 "DA,Data address"
group.long c14:(0x0700+0x30)++0x00
line.long 0x00 "DBGWCR3,Watchpoint Control Register"
bitfld.long 0x0 24.--28. "MASK,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF"
bitfld.long 0x0 20. "WT,Watchpoint Type" "Unlinked,Linked"
bitfld.long 0x0 16.--19. "LBN,Linked BRP number" "BRP0,BRP1,BRP2,BRP3,BRP4,BRP5,?..."
newline
bitfld.long 0x0 14.--15. "SSC,Secure state control" "Both,Non-secure,Secure,?..."
bitfld.long 0x0 13. "HMC,Hyp Mode Control" "Disabled,Enabled"
hexmask.long.byte 0x0 5.--12. "BAS,Byte address select"
newline
bitfld.long 0x0 3.--4. "LSC,Load/Store access control" "Reserved,Load,Store,Any"
bitfld.long 0x0 1.--2. "PAC,Privileged Access control" "Reserved,Match privileged accesses,Match unprivileged accesses,Match all accesses"
bitfld.long 0x0 0. "WE,Watchpoint enable" "Disabled,Enabled"
tree.end
tree.end
tree.end
AUTOINDENT.OFF
tree.open "Interrupt Controller (GIC-500)"
base COMP.BASE("GICD",-1.)
width 17.
tree "Distributor Interface"
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)))
group.long 0x0000++0x03
line.long 0x00 "GICD_CTLR,Distributor Control Register (Secure access)"
rbitfld.long 0x00 31. " RWP          ,Register Write Pending. Indicates whether a register write is in progress or not" "Not pending,Pending"
bitfld.long 0x00 7. "    E1NWF      ,Enable 1 of N Wakeup Functionality" "Disabled,Enabled"
bitfld.long 0x00 6. "       DS            ,Disable Security" "No,Yes"
textline "                          "
bitfld.long 0x00 5. " ARE_NS       ,Affinity Routing Enable" "Disabled,Enabled"
bitfld.long 0x00 4. "       ARE_S      ,Affinity Routing Enable" "Disabled,Enabled"
bitfld.long 0x00 2. "       ENABLEGRP1S   ,Enable Secure Group 1 interrupts" "Disabled,Enabled"
textline "                          "
bitfld.long 0x00 1. " ENABLEGRP1NS ,Enable Secure Group 1 interrupts" "Disabled,Enabled"
bitfld.long 0x00 0. "       ENABLEGRP0 ,Enable Group 0 interrupts" "Disabled,Enabled"
elif (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)
group.long 0x0000++0x03
line.long 0x00 "GICD_CTLR,Distributor Control Register (Non-secure access)"
rbitfld.long 0x00 31. " RWP          ,Register Write Pending. Indicates whether a register write is in progress or not" "Not pending,Pending"
bitfld.long 0x00 7. "    E1NWF      ,Enable 1 of N Wakeup Functionality" "Disabled,Enabled"
bitfld.long 0x00 4. "       ARE_NS        ,Affinity Routing Enable" "Reserved,Enabled"
textline "                          "
bitfld.long 0x00 1. " ENABLEGRP1A  ,Enable Group 1 interrupts" "Disabled,Enabled"
bitfld.long 0x00 0. "       ENABLEGRP1 ,Enable Group 1 interrupts" "Disabled,Enabled"
else
group.long 0x0000++0x03
line.long 0x00 "GICD_CTLR,Distributor Control Register"
rbitfld.long 0x00 31. " RWP          ,Register Write Pending. Indicates whether a register write is in progress or not" "Not pending,Pending"
bitfld.long 0x00 7. "    E1NWF      ,Enable 1 of N Wakeup Functionality" "Disabled,Enabled"
rbitfld.long 0x00 6. "       DS            ,Disable Security" "Reserved,Yes"
textline "                          "
bitfld.long 0x00 4. " ARE          ,Affinity Routing Enable" "Reserved,Enabled"
bitfld.long 0x00 1. "       ENABLEGRP1 ,Enable Group 1 interrupts" "Disabled,Enabled"
bitfld.long 0x00 0. "       ENABLEGRP0    ,Enable Group 0 interrupts" "Disabled,Enabled"
endif
rgroup.long 0x0004++0x03
line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register"
bitfld.long 0x00 25. " NO1N         ,Indicates whether 1 of N SPI interrupts are supported" "Supported,Not supported"
bitfld.long 0x00 24. "  A3V        ,Indicates whether the Distributor supports nonzero values of Affinity level 3" "Not supported,Supported"
bitfld.long 0x00 19.--23. "  IDBITS        ,The number of interrupt identifier bits supported" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,?..."
textline "                          "
bitfld.long 0x00 17. " LPIS         ,Indicates whether the implementation supports LPIs" "Not supported,Supported"
bitfld.long 0x00 16. "  MBIS       ,Indicates whether the implementation supports message-based interrupts by writing to Distributor registers" "Not supported,Supported"
bitfld.long 0x00 10. "  SECURITYEXTN  ,Indicates whether interrupt controller implements the security extensions" "Not implemented,Implemented"
textline "                          "
bitfld.long 0x00 5.--7. " CPUNUMBER    ,Reports the number of PEs that can be used when affinity routing is not enabled" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 0.--4. "              ITLN       ,Indicates the maximum SPI INTID that the GIC implementation supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Reserved"
rgroup.long 0x0008++0x03
line.long 0x00 "GICD_IIDR,Distributor Implementer Identification Register"
bitfld.long 0x00 24.--31. " PRODID       ,Indicates the product ID" "GIC-500,?..."
bitfld.long 0x00 16.--19. "        VAR        ,Major revison number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                          "
bitfld.long 0x00 12.--15. " REV          ,Minor revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "             IMP        ,Implementer"
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x10000)==0x10000)
wgroup.long 0x40++0x03
line.long 0x00 "GICD_SETSPI_NSR,Non-secure SPI Set Register"
hexmask.long.word 0x00 0.--9. 1. " INTID        ,The INTID of the SPI"
wgroup.long 0x48++0x03
line.long 0x00 "GICD_CLRSPI_NSR,Non-secure SPI Clear Register"
hexmask.long.word 0x00 0.--9. 1. " INTID        ,The INTID of the SPI"
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x50))
wgroup.long 0x50++0x03
line.long 0x00 "GICD_SETSPI_SR,Secure SPI Set Register (Secure access)"
hexmask.long.word 0x00 0.--9. 1. " INTID        ,The INTID of the SPI"
else
hgroup.long 0x50++0x03
hide.long 0x00 "GICD_SETSPI_SR,Secure SPI Set Register (Non-secure access)"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x58))
wgroup.long 0x58++0x03
line.long 0x00 "GICD_CLRSPI_SR,Secure SPI Clear Register (Secure access)"
hexmask.long.word 0x00 0.--9. 1. " INTID        ,The INTID of the SPI"
else
hgroup.long 0x58++0x03
hide.long 0x00 "GICD_CLRSPI_SR,Secure SPI Clear Register (Non-secure access)"
endif
else
hgroup.long 0x40++0x03
hide.long 0x00 "GICD_SETSPI_NSR,Non-secure SPI Set Register"
hgroup.long 0x48++0x03
hide.long 0x00 "GICD_CLRSPI_NSR,Non-secure SPI Clear Register"
hgroup.long 0x50++0x03
hide.long 0x00 "GICD_SETSPI_SR,Secure SPI Set Register"
hgroup.long 0x58++0x03
hide.long 0x00 "GICD_CLRSPI_SR,Secure SPI Clear Register"
endif
width 17.
tree "Group Registers"
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0080))
group.long 0x0080++0x03
line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Secure Access)"
bitfld.long 0x00 31. " GSB31  ,Group Status Bit 31" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB30  ,Group Status Bit 30" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB29  ,Group Status Bit 29" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB28  ,Group Status Bit 28" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB27  ,Group Status Bit 27" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB26  ,Group Status Bit 26" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB25  ,Group Status Bit 25" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB24  ,Group Status Bit 24" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB23  ,Group Status Bit 23" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB22  ,Group Status Bit 22" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB21  ,Group Status Bit 21" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB20  ,Group Status Bit 20" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB19  ,Group Status Bit 19" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB18  ,Group Status Bit 18" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB17  ,Group Status Bit 17" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB16  ,Group Status Bit 16" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB15  ,Group Status Bit 15" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB14  ,Group Status Bit 14" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB13  ,Group Status Bit 13" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB12  ,Group Status Bit 12" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB11  ,Group Status Bit 11" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB10  ,Group Status Bit 10" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB9   ,Group Status Bit 9" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB8   ,Group Status Bit 8" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB7   ,Group Status Bit 7" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB6   ,Group Status Bit 6" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB5   ,Group Status Bit 5" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB4   ,Group Status Bit 4" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB3   ,Group Status Bit 3" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB2   ,Group Status Bit 2" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB1   ,Group Status Bit 1" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB0   ,Group Status Bit 0" "Secure,Non-secure Group 1"
elif (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)
group.long 0x0080++0x03
line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0"
bitfld.long 0x00 31. " GSB31  ,Group Status Bit 31" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB30  ,Group Status Bit 30" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB29  ,Group Status Bit 29" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB28  ,Group Status Bit 28" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB27  ,Group Status Bit 27" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB26  ,Group Status Bit 26" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB25  ,Group Status Bit 25" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB24  ,Group Status Bit 24" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB23  ,Group Status Bit 23" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB22  ,Group Status Bit 22" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB21  ,Group Status Bit 21" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB20  ,Group Status Bit 20" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB19  ,Group Status Bit 19" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB18  ,Group Status Bit 18" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB17  ,Group Status Bit 17" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB16  ,Group Status Bit 16" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB15  ,Group Status Bit 15" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB14  ,Group Status Bit 14" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB13  ,Group Status Bit 13" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB12  ,Group Status Bit 12" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB11  ,Group Status Bit 11" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB10  ,Group Status Bit 10" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB9   ,Group Status Bit 9" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB8   ,Group Status Bit 8" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB7   ,Group Status Bit 7" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB6   ,Group Status Bit 6" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB5   ,Group Status Bit 5" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB4   ,Group Status Bit 4" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB3   ,Group Status Bit 3" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB2   ,Group Status Bit 2" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB1   ,Group Status Bit 1" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB0   ,Group Status Bit 0" "Group 0,Group 1"
else
hgroup.long 0x0080++0x03
hide.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Non-secure access)"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x84))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1))
group.long 0x0084++0x03
line.long 0x0 "GICD_IGROUPR1 ,Interrupt Group Register 1 (Secure Access)"
bitfld.long 0x00 31. " GSB63  ,Group Status Bit 63" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB62  ,Group Status Bit 62" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB61  ,Group Status Bit 61" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB60  ,Group Status Bit 60" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB59  ,Group Status Bit 59" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB58  ,Group Status Bit 58" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB57  ,Group Status Bit 57" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB56  ,Group Status Bit 56" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB55  ,Group Status Bit 55" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB54  ,Group Status Bit 54" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB53  ,Group Status Bit 53" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB52  ,Group Status Bit 52" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB51  ,Group Status Bit 51" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB50  ,Group Status Bit 50" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB49  ,Group Status Bit 49" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB48  ,Group Status Bit 48" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB47  ,Group Status Bit 47" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB46  ,Group Status Bit 46" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB45  ,Group Status Bit 45" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB44  ,Group Status Bit 44" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB43  ,Group Status Bit 43" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB42  ,Group Status Bit 42" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB41  ,Group Status Bit 41" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB40  ,Group Status Bit 40" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB39  ,Group Status Bit 39" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB38  ,Group Status Bit 38" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB37  ,Group Status Bit 37" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB36  ,Group Status Bit 36" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB35  ,Group Status Bit 35" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB34  ,Group Status Bit 34" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB33  ,Group Status Bit 33" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB32  ,Group Status Bit 32" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1))
group.long 0x0084++0x03
line.long 0x0 "GICD_IGROUPR1 ,Interrupt Group Register 1 "
bitfld.long 0x00 31. " GSB63  ,Group Status Bit 63" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB62  ,Group Status Bit 62" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB61  ,Group Status Bit 61" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB60  ,Group Status Bit 60" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB59  ,Group Status Bit 59" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB58  ,Group Status Bit 58" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB57  ,Group Status Bit 57" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB56  ,Group Status Bit 56" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB55  ,Group Status Bit 55" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB54  ,Group Status Bit 54" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB53  ,Group Status Bit 53" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB52  ,Group Status Bit 52" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB51  ,Group Status Bit 51" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB50  ,Group Status Bit 50" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB49  ,Group Status Bit 49" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB48  ,Group Status Bit 48" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB47  ,Group Status Bit 47" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB46  ,Group Status Bit 46" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB45  ,Group Status Bit 45" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB44  ,Group Status Bit 44" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB43  ,Group Status Bit 43" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB42  ,Group Status Bit 42" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB41  ,Group Status Bit 41" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB40  ,Group Status Bit 40" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB39  ,Group Status Bit 39" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB38  ,Group Status Bit 38" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB37  ,Group Status Bit 37" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB36  ,Group Status Bit 36" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB35  ,Group Status Bit 35" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB34  ,Group Status Bit 34" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB33  ,Group Status Bit 33" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB32  ,Group Status Bit 32" "Group 0,Group 1"
else
hgroup.long 0x0084++0x03
hide.long 0x0 "GICD_IGROUPR1 ,Interrupt Group Register 1 "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x88))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x2))
group.long 0x0088++0x03
line.long 0x0 "GICD_IGROUPR2 ,Interrupt Group Register 2 (Secure Access)"
bitfld.long 0x00 31. " GSB95  ,Group Status Bit 95" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB94  ,Group Status Bit 94" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB93  ,Group Status Bit 93" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB92  ,Group Status Bit 92" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB91  ,Group Status Bit 91" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB90  ,Group Status Bit 90" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB89  ,Group Status Bit 89" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB88  ,Group Status Bit 88" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB87  ,Group Status Bit 87" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB86  ,Group Status Bit 86" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB85  ,Group Status Bit 85" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB84  ,Group Status Bit 84" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB83  ,Group Status Bit 83" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB82  ,Group Status Bit 82" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB81  ,Group Status Bit 81" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB80  ,Group Status Bit 80" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB79  ,Group Status Bit 79" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB78  ,Group Status Bit 78" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB77  ,Group Status Bit 77" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB76  ,Group Status Bit 76" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB75  ,Group Status Bit 75" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB74  ,Group Status Bit 74" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB73  ,Group Status Bit 73" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB72  ,Group Status Bit 72" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB71  ,Group Status Bit 71" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB70  ,Group Status Bit 70" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB69  ,Group Status Bit 69" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB68  ,Group Status Bit 68" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB67  ,Group Status Bit 67" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB66  ,Group Status Bit 66" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB65  ,Group Status Bit 65" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB64  ,Group Status Bit 64" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x2))
group.long 0x0088++0x03
line.long 0x0 "GICD_IGROUPR2 ,Interrupt Group Register 2 "
bitfld.long 0x00 31. " GSB95  ,Group Status Bit 95" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB94  ,Group Status Bit 94" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB93  ,Group Status Bit 93" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB92  ,Group Status Bit 92" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB91  ,Group Status Bit 91" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB90  ,Group Status Bit 90" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB89  ,Group Status Bit 89" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB88  ,Group Status Bit 88" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB87  ,Group Status Bit 87" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB86  ,Group Status Bit 86" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB85  ,Group Status Bit 85" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB84  ,Group Status Bit 84" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB83  ,Group Status Bit 83" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB82  ,Group Status Bit 82" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB81  ,Group Status Bit 81" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB80  ,Group Status Bit 80" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB79  ,Group Status Bit 79" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB78  ,Group Status Bit 78" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB77  ,Group Status Bit 77" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB76  ,Group Status Bit 76" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB75  ,Group Status Bit 75" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB74  ,Group Status Bit 74" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB73  ,Group Status Bit 73" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB72  ,Group Status Bit 72" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB71  ,Group Status Bit 71" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB70  ,Group Status Bit 70" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB69  ,Group Status Bit 69" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB68  ,Group Status Bit 68" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB67  ,Group Status Bit 67" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB66  ,Group Status Bit 66" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB65  ,Group Status Bit 65" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB64  ,Group Status Bit 64" "Group 0,Group 1"
else
hgroup.long 0x0088++0x03
hide.long 0x0 "GICD_IGROUPR2 ,Interrupt Group Register 2 "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x8C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x3))
group.long 0x008C++0x03
line.long 0x0 "GICD_IGROUPR3 ,Interrupt Group Register 3 (Secure Access)"
bitfld.long 0x00 31. " GSB127 ,Group Status Bit 127" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB126 ,Group Status Bit 126" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB125 ,Group Status Bit 125" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB124 ,Group Status Bit 124" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB123 ,Group Status Bit 123" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB122 ,Group Status Bit 122" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB121 ,Group Status Bit 121" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB120 ,Group Status Bit 120" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB119 ,Group Status Bit 119" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB118 ,Group Status Bit 118" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB117 ,Group Status Bit 117" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB116 ,Group Status Bit 116" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB115 ,Group Status Bit 115" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB114 ,Group Status Bit 114" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB113 ,Group Status Bit 113" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB112 ,Group Status Bit 112" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB111 ,Group Status Bit 111" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB110 ,Group Status Bit 110" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB109 ,Group Status Bit 109" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB108 ,Group Status Bit 108" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB107 ,Group Status Bit 107" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB106 ,Group Status Bit 106" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB105 ,Group Status Bit 105" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB104 ,Group Status Bit 104" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB103 ,Group Status Bit 103" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB102 ,Group Status Bit 102" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB101 ,Group Status Bit 101" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB100 ,Group Status Bit 100" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB99  ,Group Status Bit 99" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB98  ,Group Status Bit 98" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB97  ,Group Status Bit 97" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB96  ,Group Status Bit 96" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x3))
group.long 0x008C++0x03
line.long 0x0 "GICD_IGROUPR3 ,Interrupt Group Register 3 "
bitfld.long 0x00 31. " GSB127 ,Group Status Bit 127" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB126 ,Group Status Bit 126" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB125 ,Group Status Bit 125" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB124 ,Group Status Bit 124" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB123 ,Group Status Bit 123" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB122 ,Group Status Bit 122" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB121 ,Group Status Bit 121" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB120 ,Group Status Bit 120" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB119 ,Group Status Bit 119" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB118 ,Group Status Bit 118" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB117 ,Group Status Bit 117" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB116 ,Group Status Bit 116" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB115 ,Group Status Bit 115" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB114 ,Group Status Bit 114" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB113 ,Group Status Bit 113" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB112 ,Group Status Bit 112" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB111 ,Group Status Bit 111" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB110 ,Group Status Bit 110" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB109 ,Group Status Bit 109" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB108 ,Group Status Bit 108" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB107 ,Group Status Bit 107" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB106 ,Group Status Bit 106" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB105 ,Group Status Bit 105" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB104 ,Group Status Bit 104" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB103 ,Group Status Bit 103" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB102 ,Group Status Bit 102" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB101 ,Group Status Bit 101" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB100 ,Group Status Bit 100" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB99  ,Group Status Bit 99" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB98  ,Group Status Bit 98" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB97  ,Group Status Bit 97" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB96  ,Group Status Bit 96" "Group 0,Group 1"
else
hgroup.long 0x008C++0x03
hide.long 0x0 "GICD_IGROUPR3 ,Interrupt Group Register 3 "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x90))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x4))
group.long 0x0090++0x03
line.long 0x0 "GICD_IGROUPR4 ,Interrupt Group Register 4 (Secure Access)"
bitfld.long 0x00 31. " GSB159 ,Group Status Bit 159" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB158 ,Group Status Bit 158" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB157 ,Group Status Bit 157" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB156 ,Group Status Bit 156" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB155 ,Group Status Bit 155" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB154 ,Group Status Bit 154" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB153 ,Group Status Bit 153" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB152 ,Group Status Bit 152" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB151 ,Group Status Bit 151" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB150 ,Group Status Bit 150" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB149 ,Group Status Bit 149" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB148 ,Group Status Bit 148" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB147 ,Group Status Bit 147" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB146 ,Group Status Bit 146" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB145 ,Group Status Bit 145" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB144 ,Group Status Bit 144" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB143 ,Group Status Bit 143" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB142 ,Group Status Bit 142" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB141 ,Group Status Bit 141" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB140 ,Group Status Bit 140" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB139 ,Group Status Bit 139" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB138 ,Group Status Bit 138" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB137 ,Group Status Bit 137" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB136 ,Group Status Bit 136" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB135 ,Group Status Bit 135" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB134 ,Group Status Bit 134" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB133 ,Group Status Bit 133" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB132 ,Group Status Bit 132" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB131 ,Group Status Bit 131" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB130 ,Group Status Bit 130" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB129 ,Group Status Bit 129" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB128 ,Group Status Bit 128" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x4))
group.long 0x0090++0x03
line.long 0x0 "GICD_IGROUPR4 ,Interrupt Group Register 4 "
bitfld.long 0x00 31. " GSB159 ,Group Status Bit 159" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB158 ,Group Status Bit 158" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB157 ,Group Status Bit 157" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB156 ,Group Status Bit 156" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB155 ,Group Status Bit 155" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB154 ,Group Status Bit 154" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB153 ,Group Status Bit 153" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB152 ,Group Status Bit 152" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB151 ,Group Status Bit 151" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB150 ,Group Status Bit 150" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB149 ,Group Status Bit 149" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB148 ,Group Status Bit 148" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB147 ,Group Status Bit 147" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB146 ,Group Status Bit 146" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB145 ,Group Status Bit 145" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB144 ,Group Status Bit 144" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB143 ,Group Status Bit 143" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB142 ,Group Status Bit 142" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB141 ,Group Status Bit 141" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB140 ,Group Status Bit 140" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB139 ,Group Status Bit 139" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB138 ,Group Status Bit 138" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB137 ,Group Status Bit 137" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB136 ,Group Status Bit 136" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB135 ,Group Status Bit 135" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB134 ,Group Status Bit 134" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB133 ,Group Status Bit 133" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB132 ,Group Status Bit 132" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB131 ,Group Status Bit 131" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB130 ,Group Status Bit 130" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB129 ,Group Status Bit 129" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB128 ,Group Status Bit 128" "Group 0,Group 1"
else
hgroup.long 0x0090++0x03
hide.long 0x0 "GICD_IGROUPR4 ,Interrupt Group Register 4 "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x94))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x5))
group.long 0x0094++0x03
line.long 0x0 "GICD_IGROUPR5 ,Interrupt Group Register 5 (Secure Access)"
bitfld.long 0x00 31. " GSB191 ,Group Status Bit 191" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB190 ,Group Status Bit 190" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB189 ,Group Status Bit 189" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB188 ,Group Status Bit 188" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB187 ,Group Status Bit 187" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB186 ,Group Status Bit 186" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB185 ,Group Status Bit 185" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB184 ,Group Status Bit 184" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB183 ,Group Status Bit 183" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB182 ,Group Status Bit 182" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB181 ,Group Status Bit 181" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB180 ,Group Status Bit 180" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB179 ,Group Status Bit 179" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB178 ,Group Status Bit 178" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB177 ,Group Status Bit 177" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB176 ,Group Status Bit 176" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB175 ,Group Status Bit 175" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB174 ,Group Status Bit 174" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB173 ,Group Status Bit 173" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB172 ,Group Status Bit 172" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB171 ,Group Status Bit 171" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB170 ,Group Status Bit 170" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB169 ,Group Status Bit 169" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB168 ,Group Status Bit 168" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB167 ,Group Status Bit 167" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB166 ,Group Status Bit 166" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB165 ,Group Status Bit 165" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB164 ,Group Status Bit 164" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB163 ,Group Status Bit 163" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB162 ,Group Status Bit 162" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB161 ,Group Status Bit 161" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB160 ,Group Status Bit 160" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x5))
group.long 0x0094++0x03
line.long 0x0 "GICD_IGROUPR5 ,Interrupt Group Register 5 "
bitfld.long 0x00 31. " GSB191 ,Group Status Bit 191" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB190 ,Group Status Bit 190" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB189 ,Group Status Bit 189" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB188 ,Group Status Bit 188" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB187 ,Group Status Bit 187" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB186 ,Group Status Bit 186" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB185 ,Group Status Bit 185" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB184 ,Group Status Bit 184" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB183 ,Group Status Bit 183" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB182 ,Group Status Bit 182" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB181 ,Group Status Bit 181" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB180 ,Group Status Bit 180" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB179 ,Group Status Bit 179" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB178 ,Group Status Bit 178" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB177 ,Group Status Bit 177" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB176 ,Group Status Bit 176" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB175 ,Group Status Bit 175" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB174 ,Group Status Bit 174" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB173 ,Group Status Bit 173" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB172 ,Group Status Bit 172" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB171 ,Group Status Bit 171" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB170 ,Group Status Bit 170" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB169 ,Group Status Bit 169" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB168 ,Group Status Bit 168" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB167 ,Group Status Bit 167" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB166 ,Group Status Bit 166" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB165 ,Group Status Bit 165" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB164 ,Group Status Bit 164" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB163 ,Group Status Bit 163" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB162 ,Group Status Bit 162" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB161 ,Group Status Bit 161" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB160 ,Group Status Bit 160" "Group 0,Group 1"
else
hgroup.long 0x0094++0x03
hide.long 0x0 "GICD_IGROUPR5 ,Interrupt Group Register 5 "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x98))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x6))
group.long 0x0098++0x03
line.long 0x0 "GICD_IGROUPR6 ,Interrupt Group Register 6 (Secure Access)"
bitfld.long 0x00 31. " GSB223 ,Group Status Bit 223" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB222 ,Group Status Bit 222" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB221 ,Group Status Bit 221" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB220 ,Group Status Bit 220" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB219 ,Group Status Bit 219" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB218 ,Group Status Bit 218" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB217 ,Group Status Bit 217" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB216 ,Group Status Bit 216" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB215 ,Group Status Bit 215" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB214 ,Group Status Bit 214" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB213 ,Group Status Bit 213" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB212 ,Group Status Bit 212" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB211 ,Group Status Bit 211" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB210 ,Group Status Bit 210" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB209 ,Group Status Bit 209" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB208 ,Group Status Bit 208" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB207 ,Group Status Bit 207" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB206 ,Group Status Bit 206" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB205 ,Group Status Bit 205" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB204 ,Group Status Bit 204" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB203 ,Group Status Bit 203" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB202 ,Group Status Bit 202" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB201 ,Group Status Bit 201" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB200 ,Group Status Bit 200" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB199 ,Group Status Bit 199" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB198 ,Group Status Bit 198" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB197 ,Group Status Bit 197" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB196 ,Group Status Bit 196" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB195 ,Group Status Bit 195" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB194 ,Group Status Bit 194" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB193 ,Group Status Bit 193" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB192 ,Group Status Bit 192" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x6))
group.long 0x0098++0x03
line.long 0x0 "GICD_IGROUPR6 ,Interrupt Group Register 6 "
bitfld.long 0x00 31. " GSB223 ,Group Status Bit 223" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB222 ,Group Status Bit 222" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB221 ,Group Status Bit 221" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB220 ,Group Status Bit 220" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB219 ,Group Status Bit 219" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB218 ,Group Status Bit 218" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB217 ,Group Status Bit 217" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB216 ,Group Status Bit 216" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB215 ,Group Status Bit 215" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB214 ,Group Status Bit 214" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB213 ,Group Status Bit 213" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB212 ,Group Status Bit 212" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB211 ,Group Status Bit 211" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB210 ,Group Status Bit 210" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB209 ,Group Status Bit 209" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB208 ,Group Status Bit 208" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB207 ,Group Status Bit 207" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB206 ,Group Status Bit 206" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB205 ,Group Status Bit 205" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB204 ,Group Status Bit 204" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB203 ,Group Status Bit 203" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB202 ,Group Status Bit 202" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB201 ,Group Status Bit 201" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB200 ,Group Status Bit 200" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB199 ,Group Status Bit 199" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB198 ,Group Status Bit 198" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB197 ,Group Status Bit 197" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB196 ,Group Status Bit 196" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB195 ,Group Status Bit 195" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB194 ,Group Status Bit 194" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB193 ,Group Status Bit 193" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB192 ,Group Status Bit 192" "Group 0,Group 1"
else
hgroup.long 0x0098++0x03
hide.long 0x0 "GICD_IGROUPR6 ,Interrupt Group Register 6 "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x9C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x7))
group.long 0x009C++0x03
line.long 0x0 "GICD_IGROUPR7 ,Interrupt Group Register 7 (Secure Access)"
bitfld.long 0x00 31. " GSB255 ,Group Status Bit 255" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB254 ,Group Status Bit 254" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB253 ,Group Status Bit 253" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB252 ,Group Status Bit 252" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB251 ,Group Status Bit 251" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB250 ,Group Status Bit 250" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB249 ,Group Status Bit 249" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB248 ,Group Status Bit 248" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB247 ,Group Status Bit 247" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB246 ,Group Status Bit 246" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB245 ,Group Status Bit 245" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB244 ,Group Status Bit 244" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB243 ,Group Status Bit 243" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB242 ,Group Status Bit 242" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB241 ,Group Status Bit 241" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB240 ,Group Status Bit 240" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB239 ,Group Status Bit 239" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB238 ,Group Status Bit 238" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB237 ,Group Status Bit 237" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB236 ,Group Status Bit 236" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB235 ,Group Status Bit 235" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB234 ,Group Status Bit 234" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB233 ,Group Status Bit 233" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB232 ,Group Status Bit 232" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB231 ,Group Status Bit 231" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB230 ,Group Status Bit 230" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB229 ,Group Status Bit 229" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB228 ,Group Status Bit 228" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB227 ,Group Status Bit 227" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB226 ,Group Status Bit 226" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB225 ,Group Status Bit 225" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB224 ,Group Status Bit 224" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x7))
group.long 0x009C++0x03
line.long 0x0 "GICD_IGROUPR7 ,Interrupt Group Register 7 "
bitfld.long 0x00 31. " GSB255 ,Group Status Bit 255" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB254 ,Group Status Bit 254" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB253 ,Group Status Bit 253" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB252 ,Group Status Bit 252" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB251 ,Group Status Bit 251" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB250 ,Group Status Bit 250" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB249 ,Group Status Bit 249" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB248 ,Group Status Bit 248" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB247 ,Group Status Bit 247" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB246 ,Group Status Bit 246" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB245 ,Group Status Bit 245" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB244 ,Group Status Bit 244" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB243 ,Group Status Bit 243" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB242 ,Group Status Bit 242" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB241 ,Group Status Bit 241" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB240 ,Group Status Bit 240" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB239 ,Group Status Bit 239" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB238 ,Group Status Bit 238" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB237 ,Group Status Bit 237" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB236 ,Group Status Bit 236" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB235 ,Group Status Bit 235" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB234 ,Group Status Bit 234" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB233 ,Group Status Bit 233" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB232 ,Group Status Bit 232" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB231 ,Group Status Bit 231" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB230 ,Group Status Bit 230" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB229 ,Group Status Bit 229" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB228 ,Group Status Bit 228" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB227 ,Group Status Bit 227" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB226 ,Group Status Bit 226" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB225 ,Group Status Bit 225" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB224 ,Group Status Bit 224" "Group 0,Group 1"
else
hgroup.long 0x009C++0x03
hide.long 0x0 "GICD_IGROUPR7 ,Interrupt Group Register 7 "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xA0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x8))
group.long 0x00A0++0x03
line.long 0x0 "GICD_IGROUPR8 ,Interrupt Group Register 8 (Secure Access)"
bitfld.long 0x00 31. " GSB287 ,Group Status Bit 287" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB286 ,Group Status Bit 286" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB285 ,Group Status Bit 285" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB284 ,Group Status Bit 284" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB283 ,Group Status Bit 283" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB282 ,Group Status Bit 282" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB281 ,Group Status Bit 281" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB280 ,Group Status Bit 280" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB279 ,Group Status Bit 279" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB278 ,Group Status Bit 278" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB277 ,Group Status Bit 277" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB276 ,Group Status Bit 276" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB275 ,Group Status Bit 275" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB274 ,Group Status Bit 274" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB273 ,Group Status Bit 273" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB272 ,Group Status Bit 272" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB271 ,Group Status Bit 271" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB270 ,Group Status Bit 270" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB269 ,Group Status Bit 269" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB268 ,Group Status Bit 268" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB267 ,Group Status Bit 267" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB266 ,Group Status Bit 266" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB265 ,Group Status Bit 265" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB264 ,Group Status Bit 264" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB263 ,Group Status Bit 263" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB262 ,Group Status Bit 262" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB261 ,Group Status Bit 261" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB260 ,Group Status Bit 260" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB259 ,Group Status Bit 259" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB258 ,Group Status Bit 258" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB257 ,Group Status Bit 257" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB256 ,Group Status Bit 256" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x8))
group.long 0x00A0++0x03
line.long 0x0 "GICD_IGROUPR8 ,Interrupt Group Register 8 "
bitfld.long 0x00 31. " GSB287 ,Group Status Bit 287" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB286 ,Group Status Bit 286" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB285 ,Group Status Bit 285" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB284 ,Group Status Bit 284" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB283 ,Group Status Bit 283" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB282 ,Group Status Bit 282" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB281 ,Group Status Bit 281" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB280 ,Group Status Bit 280" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB279 ,Group Status Bit 279" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB278 ,Group Status Bit 278" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB277 ,Group Status Bit 277" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB276 ,Group Status Bit 276" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB275 ,Group Status Bit 275" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB274 ,Group Status Bit 274" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB273 ,Group Status Bit 273" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB272 ,Group Status Bit 272" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB271 ,Group Status Bit 271" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB270 ,Group Status Bit 270" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB269 ,Group Status Bit 269" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB268 ,Group Status Bit 268" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB267 ,Group Status Bit 267" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB266 ,Group Status Bit 266" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB265 ,Group Status Bit 265" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB264 ,Group Status Bit 264" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB263 ,Group Status Bit 263" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB262 ,Group Status Bit 262" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB261 ,Group Status Bit 261" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB260 ,Group Status Bit 260" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB259 ,Group Status Bit 259" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB258 ,Group Status Bit 258" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB257 ,Group Status Bit 257" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB256 ,Group Status Bit 256" "Group 0,Group 1"
else
hgroup.long 0x00A0++0x03
hide.long 0x0 "GICD_IGROUPR8 ,Interrupt Group Register 8 "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xA4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x9))
group.long 0x00A4++0x03
line.long 0x0 "GICD_IGROUPR9 ,Interrupt Group Register 9 (Secure Access)"
bitfld.long 0x00 31. " GSB319 ,Group Status Bit 319" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB318 ,Group Status Bit 318" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB317 ,Group Status Bit 317" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB316 ,Group Status Bit 316" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB315 ,Group Status Bit 315" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB314 ,Group Status Bit 314" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB313 ,Group Status Bit 313" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB312 ,Group Status Bit 312" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB311 ,Group Status Bit 311" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB310 ,Group Status Bit 310" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB309 ,Group Status Bit 309" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB308 ,Group Status Bit 308" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB307 ,Group Status Bit 307" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB306 ,Group Status Bit 306" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB305 ,Group Status Bit 305" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB304 ,Group Status Bit 304" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB303 ,Group Status Bit 303" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB302 ,Group Status Bit 302" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB301 ,Group Status Bit 301" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB300 ,Group Status Bit 300" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB299 ,Group Status Bit 299" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB298 ,Group Status Bit 298" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB297 ,Group Status Bit 297" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB296 ,Group Status Bit 296" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB295 ,Group Status Bit 295" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB294 ,Group Status Bit 294" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB293 ,Group Status Bit 293" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB292 ,Group Status Bit 292" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB291 ,Group Status Bit 291" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB290 ,Group Status Bit 290" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB289 ,Group Status Bit 289" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB288 ,Group Status Bit 288" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x9))
group.long 0x00A4++0x03
line.long 0x0 "GICD_IGROUPR9 ,Interrupt Group Register 9 "
bitfld.long 0x00 31. " GSB319 ,Group Status Bit 319" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB318 ,Group Status Bit 318" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB317 ,Group Status Bit 317" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB316 ,Group Status Bit 316" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB315 ,Group Status Bit 315" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB314 ,Group Status Bit 314" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB313 ,Group Status Bit 313" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB312 ,Group Status Bit 312" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB311 ,Group Status Bit 311" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB310 ,Group Status Bit 310" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB309 ,Group Status Bit 309" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB308 ,Group Status Bit 308" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB307 ,Group Status Bit 307" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB306 ,Group Status Bit 306" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB305 ,Group Status Bit 305" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB304 ,Group Status Bit 304" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB303 ,Group Status Bit 303" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB302 ,Group Status Bit 302" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB301 ,Group Status Bit 301" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB300 ,Group Status Bit 300" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB299 ,Group Status Bit 299" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB298 ,Group Status Bit 298" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB297 ,Group Status Bit 297" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB296 ,Group Status Bit 296" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB295 ,Group Status Bit 295" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB294 ,Group Status Bit 294" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB293 ,Group Status Bit 293" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB292 ,Group Status Bit 292" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB291 ,Group Status Bit 291" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB290 ,Group Status Bit 290" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB289 ,Group Status Bit 289" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB288 ,Group Status Bit 288" "Group 0,Group 1"
else
hgroup.long 0x00A4++0x03
hide.long 0x0 "GICD_IGROUPR9 ,Interrupt Group Register 9 "
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xA8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xA))
group.long 0x00A8++0x03
line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10 (Secure Access)"
bitfld.long 0x00 31. " GSB351 ,Group Status Bit 351" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB350 ,Group Status Bit 350" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB349 ,Group Status Bit 349" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB348 ,Group Status Bit 348" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB347 ,Group Status Bit 347" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB346 ,Group Status Bit 346" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB345 ,Group Status Bit 345" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB344 ,Group Status Bit 344" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB343 ,Group Status Bit 343" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB342 ,Group Status Bit 342" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB341 ,Group Status Bit 341" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB340 ,Group Status Bit 340" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB339 ,Group Status Bit 339" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB338 ,Group Status Bit 338" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB337 ,Group Status Bit 337" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB336 ,Group Status Bit 336" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB335 ,Group Status Bit 335" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB334 ,Group Status Bit 334" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB333 ,Group Status Bit 333" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB332 ,Group Status Bit 332" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB331 ,Group Status Bit 331" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB330 ,Group Status Bit 330" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB329 ,Group Status Bit 329" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB328 ,Group Status Bit 328" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB327 ,Group Status Bit 327" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB326 ,Group Status Bit 326" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB325 ,Group Status Bit 325" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB324 ,Group Status Bit 324" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB323 ,Group Status Bit 323" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB322 ,Group Status Bit 322" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB321 ,Group Status Bit 321" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB320 ,Group Status Bit 320" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xA))
group.long 0x00A8++0x03
line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10"
bitfld.long 0x00 31. " GSB351 ,Group Status Bit 351" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB350 ,Group Status Bit 350" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB349 ,Group Status Bit 349" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB348 ,Group Status Bit 348" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB347 ,Group Status Bit 347" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB346 ,Group Status Bit 346" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB345 ,Group Status Bit 345" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB344 ,Group Status Bit 344" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB343 ,Group Status Bit 343" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB342 ,Group Status Bit 342" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB341 ,Group Status Bit 341" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB340 ,Group Status Bit 340" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB339 ,Group Status Bit 339" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB338 ,Group Status Bit 338" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB337 ,Group Status Bit 337" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB336 ,Group Status Bit 336" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB335 ,Group Status Bit 335" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB334 ,Group Status Bit 334" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB333 ,Group Status Bit 333" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB332 ,Group Status Bit 332" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB331 ,Group Status Bit 331" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB330 ,Group Status Bit 330" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB329 ,Group Status Bit 329" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB328 ,Group Status Bit 328" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB327 ,Group Status Bit 327" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB326 ,Group Status Bit 326" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB325 ,Group Status Bit 325" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB324 ,Group Status Bit 324" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB323 ,Group Status Bit 323" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB322 ,Group Status Bit 322" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB321 ,Group Status Bit 321" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB320 ,Group Status Bit 320" "Group 0,Group 1"
else
hgroup.long 0x00A8++0x03
hide.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xAC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xB))
group.long 0x00AC++0x03
line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11 (Secure Access)"
bitfld.long 0x00 31. " GSB383 ,Group Status Bit 383" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB382 ,Group Status Bit 382" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB381 ,Group Status Bit 381" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB380 ,Group Status Bit 380" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB379 ,Group Status Bit 379" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB378 ,Group Status Bit 378" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB377 ,Group Status Bit 377" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB376 ,Group Status Bit 376" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB375 ,Group Status Bit 375" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB374 ,Group Status Bit 374" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB373 ,Group Status Bit 373" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB372 ,Group Status Bit 372" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB371 ,Group Status Bit 371" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB370 ,Group Status Bit 370" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB369 ,Group Status Bit 369" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB368 ,Group Status Bit 368" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB367 ,Group Status Bit 367" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB366 ,Group Status Bit 366" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB365 ,Group Status Bit 365" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB364 ,Group Status Bit 364" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB363 ,Group Status Bit 363" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB362 ,Group Status Bit 362" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB361 ,Group Status Bit 361" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB360 ,Group Status Bit 360" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB359 ,Group Status Bit 359" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB358 ,Group Status Bit 358" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB357 ,Group Status Bit 357" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB356 ,Group Status Bit 356" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB355 ,Group Status Bit 355" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB354 ,Group Status Bit 354" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB353 ,Group Status Bit 353" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB352 ,Group Status Bit 352" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xB))
group.long 0x00AC++0x03
line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11"
bitfld.long 0x00 31. " GSB383 ,Group Status Bit 383" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB382 ,Group Status Bit 382" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB381 ,Group Status Bit 381" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB380 ,Group Status Bit 380" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB379 ,Group Status Bit 379" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB378 ,Group Status Bit 378" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB377 ,Group Status Bit 377" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB376 ,Group Status Bit 376" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB375 ,Group Status Bit 375" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB374 ,Group Status Bit 374" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB373 ,Group Status Bit 373" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB372 ,Group Status Bit 372" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB371 ,Group Status Bit 371" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB370 ,Group Status Bit 370" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB369 ,Group Status Bit 369" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB368 ,Group Status Bit 368" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB367 ,Group Status Bit 367" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB366 ,Group Status Bit 366" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB365 ,Group Status Bit 365" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB364 ,Group Status Bit 364" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB363 ,Group Status Bit 363" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB362 ,Group Status Bit 362" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB361 ,Group Status Bit 361" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB360 ,Group Status Bit 360" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB359 ,Group Status Bit 359" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB358 ,Group Status Bit 358" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB357 ,Group Status Bit 357" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB356 ,Group Status Bit 356" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB355 ,Group Status Bit 355" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB354 ,Group Status Bit 354" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB353 ,Group Status Bit 353" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB352 ,Group Status Bit 352" "Group 0,Group 1"
else
hgroup.long 0x00AC++0x03
hide.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xB0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xC))
group.long 0x00B0++0x03
line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12 (Secure Access)"
bitfld.long 0x00 31. " GSB415 ,Group Status Bit 415" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB414 ,Group Status Bit 414" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB413 ,Group Status Bit 413" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB412 ,Group Status Bit 412" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB411 ,Group Status Bit 411" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB410 ,Group Status Bit 410" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB409 ,Group Status Bit 409" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB408 ,Group Status Bit 408" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB407 ,Group Status Bit 407" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB406 ,Group Status Bit 406" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB405 ,Group Status Bit 405" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB404 ,Group Status Bit 404" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB403 ,Group Status Bit 403" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB402 ,Group Status Bit 402" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB401 ,Group Status Bit 401" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB400 ,Group Status Bit 400" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB399 ,Group Status Bit 399" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB398 ,Group Status Bit 398" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB397 ,Group Status Bit 397" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB396 ,Group Status Bit 396" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB395 ,Group Status Bit 395" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB394 ,Group Status Bit 394" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB393 ,Group Status Bit 393" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB392 ,Group Status Bit 392" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB391 ,Group Status Bit 391" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB390 ,Group Status Bit 390" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB389 ,Group Status Bit 389" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB388 ,Group Status Bit 388" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB387 ,Group Status Bit 387" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB386 ,Group Status Bit 386" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB385 ,Group Status Bit 385" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB384 ,Group Status Bit 384" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xC))
group.long 0x00B0++0x03
line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12"
bitfld.long 0x00 31. " GSB415 ,Group Status Bit 415" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB414 ,Group Status Bit 414" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB413 ,Group Status Bit 413" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB412 ,Group Status Bit 412" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB411 ,Group Status Bit 411" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB410 ,Group Status Bit 410" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB409 ,Group Status Bit 409" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB408 ,Group Status Bit 408" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB407 ,Group Status Bit 407" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB406 ,Group Status Bit 406" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB405 ,Group Status Bit 405" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB404 ,Group Status Bit 404" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB403 ,Group Status Bit 403" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB402 ,Group Status Bit 402" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB401 ,Group Status Bit 401" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB400 ,Group Status Bit 400" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB399 ,Group Status Bit 399" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB398 ,Group Status Bit 398" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB397 ,Group Status Bit 397" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB396 ,Group Status Bit 396" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB395 ,Group Status Bit 395" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB394 ,Group Status Bit 394" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB393 ,Group Status Bit 393" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB392 ,Group Status Bit 392" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB391 ,Group Status Bit 391" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB390 ,Group Status Bit 390" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB389 ,Group Status Bit 389" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB388 ,Group Status Bit 388" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB387 ,Group Status Bit 387" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB386 ,Group Status Bit 386" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB385 ,Group Status Bit 385" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB384 ,Group Status Bit 384" "Group 0,Group 1"
else
hgroup.long 0x00B0++0x03
hide.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xB4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xD))
group.long 0x00B4++0x03
line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13 (Secure Access)"
bitfld.long 0x00 31. " GSB447 ,Group Status Bit 447" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB446 ,Group Status Bit 446" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB445 ,Group Status Bit 445" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB444 ,Group Status Bit 444" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB443 ,Group Status Bit 443" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB442 ,Group Status Bit 442" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB441 ,Group Status Bit 441" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB440 ,Group Status Bit 440" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB439 ,Group Status Bit 439" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB438 ,Group Status Bit 438" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB437 ,Group Status Bit 437" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB436 ,Group Status Bit 436" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB435 ,Group Status Bit 435" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB434 ,Group Status Bit 434" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB433 ,Group Status Bit 433" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB432 ,Group Status Bit 432" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB431 ,Group Status Bit 431" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB430 ,Group Status Bit 430" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB429 ,Group Status Bit 429" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB428 ,Group Status Bit 428" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB427 ,Group Status Bit 427" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB426 ,Group Status Bit 426" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB425 ,Group Status Bit 425" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB424 ,Group Status Bit 424" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB423 ,Group Status Bit 423" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB422 ,Group Status Bit 422" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB421 ,Group Status Bit 421" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB420 ,Group Status Bit 420" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB419 ,Group Status Bit 419" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB418 ,Group Status Bit 418" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB417 ,Group Status Bit 417" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB416 ,Group Status Bit 416" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xD))
group.long 0x00B4++0x03
line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13"
bitfld.long 0x00 31. " GSB447 ,Group Status Bit 447" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB446 ,Group Status Bit 446" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB445 ,Group Status Bit 445" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB444 ,Group Status Bit 444" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB443 ,Group Status Bit 443" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB442 ,Group Status Bit 442" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB441 ,Group Status Bit 441" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB440 ,Group Status Bit 440" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB439 ,Group Status Bit 439" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB438 ,Group Status Bit 438" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB437 ,Group Status Bit 437" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB436 ,Group Status Bit 436" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB435 ,Group Status Bit 435" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB434 ,Group Status Bit 434" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB433 ,Group Status Bit 433" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB432 ,Group Status Bit 432" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB431 ,Group Status Bit 431" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB430 ,Group Status Bit 430" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB429 ,Group Status Bit 429" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB428 ,Group Status Bit 428" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB427 ,Group Status Bit 427" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB426 ,Group Status Bit 426" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB425 ,Group Status Bit 425" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB424 ,Group Status Bit 424" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB423 ,Group Status Bit 423" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB422 ,Group Status Bit 422" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB421 ,Group Status Bit 421" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB420 ,Group Status Bit 420" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB419 ,Group Status Bit 419" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB418 ,Group Status Bit 418" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB417 ,Group Status Bit 417" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB416 ,Group Status Bit 416" "Group 0,Group 1"
else
hgroup.long 0x00B4++0x03
hide.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xB8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xE))
group.long 0x00B8++0x03
line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14 (Secure Access)"
bitfld.long 0x00 31. " GSB479 ,Group Status Bit 479" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB478 ,Group Status Bit 478" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB477 ,Group Status Bit 477" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB476 ,Group Status Bit 476" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB475 ,Group Status Bit 475" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB474 ,Group Status Bit 474" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB473 ,Group Status Bit 473" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB472 ,Group Status Bit 472" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB471 ,Group Status Bit 471" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB470 ,Group Status Bit 470" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB469 ,Group Status Bit 469" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB468 ,Group Status Bit 468" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB467 ,Group Status Bit 467" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB466 ,Group Status Bit 466" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB465 ,Group Status Bit 465" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB464 ,Group Status Bit 464" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB463 ,Group Status Bit 463" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB462 ,Group Status Bit 462" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB461 ,Group Status Bit 461" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB460 ,Group Status Bit 460" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB459 ,Group Status Bit 459" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB458 ,Group Status Bit 458" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB457 ,Group Status Bit 457" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB456 ,Group Status Bit 456" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB455 ,Group Status Bit 455" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB454 ,Group Status Bit 454" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB453 ,Group Status Bit 453" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB452 ,Group Status Bit 452" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB451 ,Group Status Bit 451" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB450 ,Group Status Bit 450" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB449 ,Group Status Bit 449" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB448 ,Group Status Bit 448" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xE))
group.long 0x00B8++0x03
line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14"
bitfld.long 0x00 31. " GSB479 ,Group Status Bit 479" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB478 ,Group Status Bit 478" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB477 ,Group Status Bit 477" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB476 ,Group Status Bit 476" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB475 ,Group Status Bit 475" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB474 ,Group Status Bit 474" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB473 ,Group Status Bit 473" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB472 ,Group Status Bit 472" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB471 ,Group Status Bit 471" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB470 ,Group Status Bit 470" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB469 ,Group Status Bit 469" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB468 ,Group Status Bit 468" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB467 ,Group Status Bit 467" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB466 ,Group Status Bit 466" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB465 ,Group Status Bit 465" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB464 ,Group Status Bit 464" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB463 ,Group Status Bit 463" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB462 ,Group Status Bit 462" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB461 ,Group Status Bit 461" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB460 ,Group Status Bit 460" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB459 ,Group Status Bit 459" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB458 ,Group Status Bit 458" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB457 ,Group Status Bit 457" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB456 ,Group Status Bit 456" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB455 ,Group Status Bit 455" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB454 ,Group Status Bit 454" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB453 ,Group Status Bit 453" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB452 ,Group Status Bit 452" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB451 ,Group Status Bit 451" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB450 ,Group Status Bit 450" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB449 ,Group Status Bit 449" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB448 ,Group Status Bit 448" "Group 0,Group 1"
else
hgroup.long 0x00B8++0x03
hide.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xBC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xF))
group.long 0x00BC++0x03
line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15 (Secure Access)"
bitfld.long 0x00 31. " GSB511 ,Group Status Bit 511" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB510 ,Group Status Bit 510" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB509 ,Group Status Bit 509" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB508 ,Group Status Bit 508" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB507 ,Group Status Bit 507" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB506 ,Group Status Bit 506" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB505 ,Group Status Bit 505" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB504 ,Group Status Bit 504" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB503 ,Group Status Bit 503" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB502 ,Group Status Bit 502" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB501 ,Group Status Bit 501" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB500 ,Group Status Bit 500" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB499 ,Group Status Bit 499" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB498 ,Group Status Bit 498" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB497 ,Group Status Bit 497" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB496 ,Group Status Bit 496" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB495 ,Group Status Bit 495" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB494 ,Group Status Bit 494" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB493 ,Group Status Bit 493" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB492 ,Group Status Bit 492" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB491 ,Group Status Bit 491" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB490 ,Group Status Bit 490" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB489 ,Group Status Bit 489" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB488 ,Group Status Bit 488" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB487 ,Group Status Bit 487" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB486 ,Group Status Bit 486" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB485 ,Group Status Bit 485" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB484 ,Group Status Bit 484" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB483 ,Group Status Bit 483" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB482 ,Group Status Bit 482" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB481 ,Group Status Bit 481" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB480 ,Group Status Bit 480" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xF))
group.long 0x00BC++0x03
line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15"
bitfld.long 0x00 31. " GSB511 ,Group Status Bit 511" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB510 ,Group Status Bit 510" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB509 ,Group Status Bit 509" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB508 ,Group Status Bit 508" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB507 ,Group Status Bit 507" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB506 ,Group Status Bit 506" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB505 ,Group Status Bit 505" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB504 ,Group Status Bit 504" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB503 ,Group Status Bit 503" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB502 ,Group Status Bit 502" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB501 ,Group Status Bit 501" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB500 ,Group Status Bit 500" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB499 ,Group Status Bit 499" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB498 ,Group Status Bit 498" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB497 ,Group Status Bit 497" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB496 ,Group Status Bit 496" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB495 ,Group Status Bit 495" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB494 ,Group Status Bit 494" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB493 ,Group Status Bit 493" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB492 ,Group Status Bit 492" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB491 ,Group Status Bit 491" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB490 ,Group Status Bit 490" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB489 ,Group Status Bit 489" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB488 ,Group Status Bit 488" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB487 ,Group Status Bit 487" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB486 ,Group Status Bit 486" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB485 ,Group Status Bit 485" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB484 ,Group Status Bit 484" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB483 ,Group Status Bit 483" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB482 ,Group Status Bit 482" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB481 ,Group Status Bit 481" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB480 ,Group Status Bit 480" "Group 0,Group 1"
else
hgroup.long 0x00BC++0x03
hide.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xC0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10))
group.long 0x00C0++0x03
line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16 (Secure Access)"
bitfld.long 0x00 31. " GSB543 ,Group Status Bit 543" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB542 ,Group Status Bit 542" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB541 ,Group Status Bit 541" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB540 ,Group Status Bit 540" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB539 ,Group Status Bit 539" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB538 ,Group Status Bit 538" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB537 ,Group Status Bit 537" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB536 ,Group Status Bit 536" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB535 ,Group Status Bit 535" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB534 ,Group Status Bit 534" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB533 ,Group Status Bit 533" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB532 ,Group Status Bit 532" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB531 ,Group Status Bit 531" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB530 ,Group Status Bit 530" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB529 ,Group Status Bit 529" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB528 ,Group Status Bit 528" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB527 ,Group Status Bit 527" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB526 ,Group Status Bit 526" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB525 ,Group Status Bit 525" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB524 ,Group Status Bit 524" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB523 ,Group Status Bit 523" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB522 ,Group Status Bit 522" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB521 ,Group Status Bit 521" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB520 ,Group Status Bit 520" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB519 ,Group Status Bit 519" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB518 ,Group Status Bit 518" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB517 ,Group Status Bit 517" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB516 ,Group Status Bit 516" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB515 ,Group Status Bit 515" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB514 ,Group Status Bit 514" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB513 ,Group Status Bit 513" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB512 ,Group Status Bit 512" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10))
group.long 0x00C0++0x03
line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16"
bitfld.long 0x00 31. " GSB543 ,Group Status Bit 543" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB542 ,Group Status Bit 542" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB541 ,Group Status Bit 541" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB540 ,Group Status Bit 540" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB539 ,Group Status Bit 539" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB538 ,Group Status Bit 538" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB537 ,Group Status Bit 537" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB536 ,Group Status Bit 536" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB535 ,Group Status Bit 535" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB534 ,Group Status Bit 534" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB533 ,Group Status Bit 533" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB532 ,Group Status Bit 532" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB531 ,Group Status Bit 531" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB530 ,Group Status Bit 530" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB529 ,Group Status Bit 529" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB528 ,Group Status Bit 528" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB527 ,Group Status Bit 527" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB526 ,Group Status Bit 526" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB525 ,Group Status Bit 525" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB524 ,Group Status Bit 524" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB523 ,Group Status Bit 523" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB522 ,Group Status Bit 522" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB521 ,Group Status Bit 521" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB520 ,Group Status Bit 520" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB519 ,Group Status Bit 519" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB518 ,Group Status Bit 518" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB517 ,Group Status Bit 517" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB516 ,Group Status Bit 516" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB515 ,Group Status Bit 515" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB514 ,Group Status Bit 514" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB513 ,Group Status Bit 513" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB512 ,Group Status Bit 512" "Group 0,Group 1"
else
hgroup.long 0x00C0++0x03
hide.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xC4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11))
group.long 0x00C4++0x03
line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17 (Secure Access)"
bitfld.long 0x00 31. " GSB575 ,Group Status Bit 575" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB574 ,Group Status Bit 574" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB573 ,Group Status Bit 573" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB572 ,Group Status Bit 572" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB571 ,Group Status Bit 571" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB570 ,Group Status Bit 570" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB569 ,Group Status Bit 569" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB568 ,Group Status Bit 568" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB567 ,Group Status Bit 567" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB566 ,Group Status Bit 566" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB565 ,Group Status Bit 565" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB564 ,Group Status Bit 564" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB563 ,Group Status Bit 563" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB562 ,Group Status Bit 562" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB561 ,Group Status Bit 561" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB560 ,Group Status Bit 560" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB559 ,Group Status Bit 559" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB558 ,Group Status Bit 558" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB557 ,Group Status Bit 557" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB556 ,Group Status Bit 556" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB555 ,Group Status Bit 555" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB554 ,Group Status Bit 554" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB553 ,Group Status Bit 553" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB552 ,Group Status Bit 552" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB551 ,Group Status Bit 551" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB550 ,Group Status Bit 550" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB549 ,Group Status Bit 549" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB548 ,Group Status Bit 548" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB547 ,Group Status Bit 547" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB546 ,Group Status Bit 546" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB545 ,Group Status Bit 545" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB544 ,Group Status Bit 544" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11))
group.long 0x00C4++0x03
line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17"
bitfld.long 0x00 31. " GSB575 ,Group Status Bit 575" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB574 ,Group Status Bit 574" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB573 ,Group Status Bit 573" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB572 ,Group Status Bit 572" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB571 ,Group Status Bit 571" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB570 ,Group Status Bit 570" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB569 ,Group Status Bit 569" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB568 ,Group Status Bit 568" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB567 ,Group Status Bit 567" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB566 ,Group Status Bit 566" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB565 ,Group Status Bit 565" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB564 ,Group Status Bit 564" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB563 ,Group Status Bit 563" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB562 ,Group Status Bit 562" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB561 ,Group Status Bit 561" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB560 ,Group Status Bit 560" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB559 ,Group Status Bit 559" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB558 ,Group Status Bit 558" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB557 ,Group Status Bit 557" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB556 ,Group Status Bit 556" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB555 ,Group Status Bit 555" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB554 ,Group Status Bit 554" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB553 ,Group Status Bit 553" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB552 ,Group Status Bit 552" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB551 ,Group Status Bit 551" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB550 ,Group Status Bit 550" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB549 ,Group Status Bit 549" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB548 ,Group Status Bit 548" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB547 ,Group Status Bit 547" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB546 ,Group Status Bit 546" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB545 ,Group Status Bit 545" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB544 ,Group Status Bit 544" "Group 0,Group 1"
else
hgroup.long 0x00C4++0x03
hide.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xC8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12))
group.long 0x00C8++0x03
line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18 (Secure Access)"
bitfld.long 0x00 31. " GSB607 ,Group Status Bit 607" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB606 ,Group Status Bit 606" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB605 ,Group Status Bit 605" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB604 ,Group Status Bit 604" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB603 ,Group Status Bit 603" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB602 ,Group Status Bit 602" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB601 ,Group Status Bit 601" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB600 ,Group Status Bit 600" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB599 ,Group Status Bit 599" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB598 ,Group Status Bit 598" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB597 ,Group Status Bit 597" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB596 ,Group Status Bit 596" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB595 ,Group Status Bit 595" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB594 ,Group Status Bit 594" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB593 ,Group Status Bit 593" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB592 ,Group Status Bit 592" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB591 ,Group Status Bit 591" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB590 ,Group Status Bit 590" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB589 ,Group Status Bit 589" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB588 ,Group Status Bit 588" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB587 ,Group Status Bit 587" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB586 ,Group Status Bit 586" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB585 ,Group Status Bit 585" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB584 ,Group Status Bit 584" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB583 ,Group Status Bit 583" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB582 ,Group Status Bit 582" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB581 ,Group Status Bit 581" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB580 ,Group Status Bit 580" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB579 ,Group Status Bit 579" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB578 ,Group Status Bit 578" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB577 ,Group Status Bit 577" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB576 ,Group Status Bit 576" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12))
group.long 0x00C8++0x03
line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18"
bitfld.long 0x00 31. " GSB607 ,Group Status Bit 607" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB606 ,Group Status Bit 606" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB605 ,Group Status Bit 605" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB604 ,Group Status Bit 604" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB603 ,Group Status Bit 603" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB602 ,Group Status Bit 602" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB601 ,Group Status Bit 601" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB600 ,Group Status Bit 600" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB599 ,Group Status Bit 599" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB598 ,Group Status Bit 598" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB597 ,Group Status Bit 597" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB596 ,Group Status Bit 596" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB595 ,Group Status Bit 595" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB594 ,Group Status Bit 594" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB593 ,Group Status Bit 593" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB592 ,Group Status Bit 592" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB591 ,Group Status Bit 591" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB590 ,Group Status Bit 590" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB589 ,Group Status Bit 589" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB588 ,Group Status Bit 588" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB587 ,Group Status Bit 587" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB586 ,Group Status Bit 586" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB585 ,Group Status Bit 585" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB584 ,Group Status Bit 584" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB583 ,Group Status Bit 583" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB582 ,Group Status Bit 582" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB581 ,Group Status Bit 581" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB580 ,Group Status Bit 580" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB579 ,Group Status Bit 579" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB578 ,Group Status Bit 578" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB577 ,Group Status Bit 577" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB576 ,Group Status Bit 576" "Group 0,Group 1"
else
hgroup.long 0x00C8++0x03
hide.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xCC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13))
group.long 0x00CC++0x03
line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19 (Secure Access)"
bitfld.long 0x00 31. " GSB639 ,Group Status Bit 639" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB638 ,Group Status Bit 638" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB637 ,Group Status Bit 637" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB636 ,Group Status Bit 636" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB635 ,Group Status Bit 635" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB634 ,Group Status Bit 634" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB633 ,Group Status Bit 633" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB632 ,Group Status Bit 632" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB631 ,Group Status Bit 631" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB630 ,Group Status Bit 630" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB629 ,Group Status Bit 629" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB628 ,Group Status Bit 628" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB627 ,Group Status Bit 627" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB626 ,Group Status Bit 626" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB625 ,Group Status Bit 625" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB624 ,Group Status Bit 624" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB623 ,Group Status Bit 623" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB622 ,Group Status Bit 622" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB621 ,Group Status Bit 621" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB620 ,Group Status Bit 620" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB619 ,Group Status Bit 619" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB618 ,Group Status Bit 618" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB617 ,Group Status Bit 617" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB616 ,Group Status Bit 616" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB615 ,Group Status Bit 615" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB614 ,Group Status Bit 614" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB613 ,Group Status Bit 613" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB612 ,Group Status Bit 612" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB611 ,Group Status Bit 611" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB610 ,Group Status Bit 610" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB609 ,Group Status Bit 609" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB608 ,Group Status Bit 608" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13))
group.long 0x00CC++0x03
line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19"
bitfld.long 0x00 31. " GSB639 ,Group Status Bit 639" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB638 ,Group Status Bit 638" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB637 ,Group Status Bit 637" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB636 ,Group Status Bit 636" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB635 ,Group Status Bit 635" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB634 ,Group Status Bit 634" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB633 ,Group Status Bit 633" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB632 ,Group Status Bit 632" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB631 ,Group Status Bit 631" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB630 ,Group Status Bit 630" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB629 ,Group Status Bit 629" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB628 ,Group Status Bit 628" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB627 ,Group Status Bit 627" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB626 ,Group Status Bit 626" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB625 ,Group Status Bit 625" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB624 ,Group Status Bit 624" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB623 ,Group Status Bit 623" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB622 ,Group Status Bit 622" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB621 ,Group Status Bit 621" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB620 ,Group Status Bit 620" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB619 ,Group Status Bit 619" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB618 ,Group Status Bit 618" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB617 ,Group Status Bit 617" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB616 ,Group Status Bit 616" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB615 ,Group Status Bit 615" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB614 ,Group Status Bit 614" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB613 ,Group Status Bit 613" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB612 ,Group Status Bit 612" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB611 ,Group Status Bit 611" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB610 ,Group Status Bit 610" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB609 ,Group Status Bit 609" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB608 ,Group Status Bit 608" "Group 0,Group 1"
else
hgroup.long 0x00CC++0x03
hide.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xD0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14))
group.long 0x00D0++0x03
line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20 (Secure Access)"
bitfld.long 0x00 31. " GSB671 ,Group Status Bit 671" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB670 ,Group Status Bit 670" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB669 ,Group Status Bit 669" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB668 ,Group Status Bit 668" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB667 ,Group Status Bit 667" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB666 ,Group Status Bit 666" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB665 ,Group Status Bit 665" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB664 ,Group Status Bit 664" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB663 ,Group Status Bit 663" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB662 ,Group Status Bit 662" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB661 ,Group Status Bit 661" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB660 ,Group Status Bit 660" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB659 ,Group Status Bit 659" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB658 ,Group Status Bit 658" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB657 ,Group Status Bit 657" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB656 ,Group Status Bit 656" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB655 ,Group Status Bit 655" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB654 ,Group Status Bit 654" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB653 ,Group Status Bit 653" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB652 ,Group Status Bit 652" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB651 ,Group Status Bit 651" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB650 ,Group Status Bit 650" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB649 ,Group Status Bit 649" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB648 ,Group Status Bit 648" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB647 ,Group Status Bit 647" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB646 ,Group Status Bit 646" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB645 ,Group Status Bit 645" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB644 ,Group Status Bit 644" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB643 ,Group Status Bit 643" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB642 ,Group Status Bit 642" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB641 ,Group Status Bit 641" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB640 ,Group Status Bit 640" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14))
group.long 0x00D0++0x03
line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20"
bitfld.long 0x00 31. " GSB671 ,Group Status Bit 671" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB670 ,Group Status Bit 670" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB669 ,Group Status Bit 669" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB668 ,Group Status Bit 668" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB667 ,Group Status Bit 667" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB666 ,Group Status Bit 666" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB665 ,Group Status Bit 665" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB664 ,Group Status Bit 664" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB663 ,Group Status Bit 663" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB662 ,Group Status Bit 662" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB661 ,Group Status Bit 661" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB660 ,Group Status Bit 660" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB659 ,Group Status Bit 659" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB658 ,Group Status Bit 658" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB657 ,Group Status Bit 657" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB656 ,Group Status Bit 656" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB655 ,Group Status Bit 655" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB654 ,Group Status Bit 654" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB653 ,Group Status Bit 653" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB652 ,Group Status Bit 652" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB651 ,Group Status Bit 651" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB650 ,Group Status Bit 650" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB649 ,Group Status Bit 649" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB648 ,Group Status Bit 648" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB647 ,Group Status Bit 647" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB646 ,Group Status Bit 646" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB645 ,Group Status Bit 645" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB644 ,Group Status Bit 644" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB643 ,Group Status Bit 643" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB642 ,Group Status Bit 642" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB641 ,Group Status Bit 641" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB640 ,Group Status Bit 640" "Group 0,Group 1"
else
hgroup.long 0x00D0++0x03
hide.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xD4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15))
group.long 0x00D4++0x03
line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21 (Secure Access)"
bitfld.long 0x00 31. " GSB703 ,Group Status Bit 703" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB702 ,Group Status Bit 702" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB701 ,Group Status Bit 701" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB700 ,Group Status Bit 700" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB699 ,Group Status Bit 699" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB698 ,Group Status Bit 698" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB697 ,Group Status Bit 697" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB696 ,Group Status Bit 696" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB695 ,Group Status Bit 695" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB694 ,Group Status Bit 694" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB693 ,Group Status Bit 693" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB692 ,Group Status Bit 692" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB691 ,Group Status Bit 691" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB690 ,Group Status Bit 690" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB689 ,Group Status Bit 689" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB688 ,Group Status Bit 688" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB687 ,Group Status Bit 687" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB686 ,Group Status Bit 686" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB685 ,Group Status Bit 685" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB684 ,Group Status Bit 684" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB683 ,Group Status Bit 683" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB682 ,Group Status Bit 682" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB681 ,Group Status Bit 681" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB680 ,Group Status Bit 680" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB679 ,Group Status Bit 679" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB678 ,Group Status Bit 678" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB677 ,Group Status Bit 677" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB676 ,Group Status Bit 676" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB675 ,Group Status Bit 675" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB674 ,Group Status Bit 674" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB673 ,Group Status Bit 673" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB672 ,Group Status Bit 672" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15))
group.long 0x00D4++0x03
line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21"
bitfld.long 0x00 31. " GSB703 ,Group Status Bit 703" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB702 ,Group Status Bit 702" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB701 ,Group Status Bit 701" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB700 ,Group Status Bit 700" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB699 ,Group Status Bit 699" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB698 ,Group Status Bit 698" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB697 ,Group Status Bit 697" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB696 ,Group Status Bit 696" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB695 ,Group Status Bit 695" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB694 ,Group Status Bit 694" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB693 ,Group Status Bit 693" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB692 ,Group Status Bit 692" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB691 ,Group Status Bit 691" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB690 ,Group Status Bit 690" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB689 ,Group Status Bit 689" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB688 ,Group Status Bit 688" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB687 ,Group Status Bit 687" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB686 ,Group Status Bit 686" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB685 ,Group Status Bit 685" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB684 ,Group Status Bit 684" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB683 ,Group Status Bit 683" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB682 ,Group Status Bit 682" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB681 ,Group Status Bit 681" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB680 ,Group Status Bit 680" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB679 ,Group Status Bit 679" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB678 ,Group Status Bit 678" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB677 ,Group Status Bit 677" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB676 ,Group Status Bit 676" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB675 ,Group Status Bit 675" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB674 ,Group Status Bit 674" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB673 ,Group Status Bit 673" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB672 ,Group Status Bit 672" "Group 0,Group 1"
else
hgroup.long 0x00D4++0x03
hide.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xD8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16))
group.long 0x00D8++0x03
line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22 (Secure Access)"
bitfld.long 0x00 31. " GSB735 ,Group Status Bit 735" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB734 ,Group Status Bit 734" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB733 ,Group Status Bit 733" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB732 ,Group Status Bit 732" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB731 ,Group Status Bit 731" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB730 ,Group Status Bit 730" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB729 ,Group Status Bit 729" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB728 ,Group Status Bit 728" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB727 ,Group Status Bit 727" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB726 ,Group Status Bit 726" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB725 ,Group Status Bit 725" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB724 ,Group Status Bit 724" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB723 ,Group Status Bit 723" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB722 ,Group Status Bit 722" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB721 ,Group Status Bit 721" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB720 ,Group Status Bit 720" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB719 ,Group Status Bit 719" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB718 ,Group Status Bit 718" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB717 ,Group Status Bit 717" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB716 ,Group Status Bit 716" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB715 ,Group Status Bit 715" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB714 ,Group Status Bit 714" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB713 ,Group Status Bit 713" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB712 ,Group Status Bit 712" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB711 ,Group Status Bit 711" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB710 ,Group Status Bit 710" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB709 ,Group Status Bit 709" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB708 ,Group Status Bit 708" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB707 ,Group Status Bit 707" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB706 ,Group Status Bit 706" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB705 ,Group Status Bit 705" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB704 ,Group Status Bit 704" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16))
group.long 0x00D8++0x03
line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22"
bitfld.long 0x00 31. " GSB735 ,Group Status Bit 735" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB734 ,Group Status Bit 734" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB733 ,Group Status Bit 733" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB732 ,Group Status Bit 732" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB731 ,Group Status Bit 731" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB730 ,Group Status Bit 730" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB729 ,Group Status Bit 729" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB728 ,Group Status Bit 728" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB727 ,Group Status Bit 727" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB726 ,Group Status Bit 726" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB725 ,Group Status Bit 725" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB724 ,Group Status Bit 724" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB723 ,Group Status Bit 723" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB722 ,Group Status Bit 722" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB721 ,Group Status Bit 721" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB720 ,Group Status Bit 720" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB719 ,Group Status Bit 719" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB718 ,Group Status Bit 718" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB717 ,Group Status Bit 717" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB716 ,Group Status Bit 716" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB715 ,Group Status Bit 715" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB714 ,Group Status Bit 714" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB713 ,Group Status Bit 713" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB712 ,Group Status Bit 712" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB711 ,Group Status Bit 711" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB710 ,Group Status Bit 710" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB709 ,Group Status Bit 709" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB708 ,Group Status Bit 708" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB707 ,Group Status Bit 707" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB706 ,Group Status Bit 706" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB705 ,Group Status Bit 705" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB704 ,Group Status Bit 704" "Group 0,Group 1"
else
hgroup.long 0x00D8++0x03
hide.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xDC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17))
group.long 0x00DC++0x03
line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23 (Secure Access)"
bitfld.long 0x00 31. " GSB767 ,Group Status Bit 767" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB766 ,Group Status Bit 766" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB765 ,Group Status Bit 765" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB764 ,Group Status Bit 764" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB763 ,Group Status Bit 763" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB762 ,Group Status Bit 762" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB761 ,Group Status Bit 761" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB760 ,Group Status Bit 760" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB759 ,Group Status Bit 759" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB758 ,Group Status Bit 758" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB757 ,Group Status Bit 757" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB756 ,Group Status Bit 756" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB755 ,Group Status Bit 755" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB754 ,Group Status Bit 754" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB753 ,Group Status Bit 753" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB752 ,Group Status Bit 752" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB751 ,Group Status Bit 751" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB750 ,Group Status Bit 750" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB749 ,Group Status Bit 749" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB748 ,Group Status Bit 748" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB747 ,Group Status Bit 747" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB746 ,Group Status Bit 746" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB745 ,Group Status Bit 745" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB744 ,Group Status Bit 744" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB743 ,Group Status Bit 743" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB742 ,Group Status Bit 742" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB741 ,Group Status Bit 741" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB740 ,Group Status Bit 740" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB739 ,Group Status Bit 739" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB738 ,Group Status Bit 738" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB737 ,Group Status Bit 737" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB736 ,Group Status Bit 736" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17))
group.long 0x00DC++0x03
line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23"
bitfld.long 0x00 31. " GSB767 ,Group Status Bit 767" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB766 ,Group Status Bit 766" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB765 ,Group Status Bit 765" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB764 ,Group Status Bit 764" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB763 ,Group Status Bit 763" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB762 ,Group Status Bit 762" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB761 ,Group Status Bit 761" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB760 ,Group Status Bit 760" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB759 ,Group Status Bit 759" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB758 ,Group Status Bit 758" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB757 ,Group Status Bit 757" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB756 ,Group Status Bit 756" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB755 ,Group Status Bit 755" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB754 ,Group Status Bit 754" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB753 ,Group Status Bit 753" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB752 ,Group Status Bit 752" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB751 ,Group Status Bit 751" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB750 ,Group Status Bit 750" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB749 ,Group Status Bit 749" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB748 ,Group Status Bit 748" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB747 ,Group Status Bit 747" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB746 ,Group Status Bit 746" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB745 ,Group Status Bit 745" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB744 ,Group Status Bit 744" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB743 ,Group Status Bit 743" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB742 ,Group Status Bit 742" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB741 ,Group Status Bit 741" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB740 ,Group Status Bit 740" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB739 ,Group Status Bit 739" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB738 ,Group Status Bit 738" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB737 ,Group Status Bit 737" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB736 ,Group Status Bit 736" "Group 0,Group 1"
else
hgroup.long 0x00DC++0x03
hide.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18))
group.long 0x00E0++0x03
line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24 (Secure Access)"
bitfld.long 0x00 31. " GSB799 ,Group Status Bit 799" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB798 ,Group Status Bit 798" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB797 ,Group Status Bit 797" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB796 ,Group Status Bit 796" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB795 ,Group Status Bit 795" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB794 ,Group Status Bit 794" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB793 ,Group Status Bit 793" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB792 ,Group Status Bit 792" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB791 ,Group Status Bit 791" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB790 ,Group Status Bit 790" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB789 ,Group Status Bit 789" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB788 ,Group Status Bit 788" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB787 ,Group Status Bit 787" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB786 ,Group Status Bit 786" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB785 ,Group Status Bit 785" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB784 ,Group Status Bit 784" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB783 ,Group Status Bit 783" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB782 ,Group Status Bit 782" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB781 ,Group Status Bit 781" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB780 ,Group Status Bit 780" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB779 ,Group Status Bit 779" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB778 ,Group Status Bit 778" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB777 ,Group Status Bit 777" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB776 ,Group Status Bit 776" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB775 ,Group Status Bit 775" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB774 ,Group Status Bit 774" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB773 ,Group Status Bit 773" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB772 ,Group Status Bit 772" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB771 ,Group Status Bit 771" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB770 ,Group Status Bit 770" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB769 ,Group Status Bit 769" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB768 ,Group Status Bit 768" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18))
group.long 0x00E0++0x03
line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24"
bitfld.long 0x00 31. " GSB799 ,Group Status Bit 799" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB798 ,Group Status Bit 798" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB797 ,Group Status Bit 797" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB796 ,Group Status Bit 796" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB795 ,Group Status Bit 795" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB794 ,Group Status Bit 794" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB793 ,Group Status Bit 793" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB792 ,Group Status Bit 792" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB791 ,Group Status Bit 791" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB790 ,Group Status Bit 790" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB789 ,Group Status Bit 789" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB788 ,Group Status Bit 788" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB787 ,Group Status Bit 787" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB786 ,Group Status Bit 786" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB785 ,Group Status Bit 785" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB784 ,Group Status Bit 784" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB783 ,Group Status Bit 783" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB782 ,Group Status Bit 782" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB781 ,Group Status Bit 781" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB780 ,Group Status Bit 780" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB779 ,Group Status Bit 779" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB778 ,Group Status Bit 778" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB777 ,Group Status Bit 777" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB776 ,Group Status Bit 776" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB775 ,Group Status Bit 775" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB774 ,Group Status Bit 774" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB773 ,Group Status Bit 773" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB772 ,Group Status Bit 772" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB771 ,Group Status Bit 771" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB770 ,Group Status Bit 770" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB769 ,Group Status Bit 769" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB768 ,Group Status Bit 768" "Group 0,Group 1"
else
hgroup.long 0x00E0++0x03
hide.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19))
group.long 0x00E4++0x03
line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25 (Secure Access)"
bitfld.long 0x00 31. " GSB831 ,Group Status Bit 831" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB830 ,Group Status Bit 830" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB829 ,Group Status Bit 829" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB828 ,Group Status Bit 828" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB827 ,Group Status Bit 827" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB826 ,Group Status Bit 826" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB825 ,Group Status Bit 825" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB824 ,Group Status Bit 824" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB823 ,Group Status Bit 823" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB822 ,Group Status Bit 822" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB821 ,Group Status Bit 821" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB820 ,Group Status Bit 820" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB819 ,Group Status Bit 819" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB818 ,Group Status Bit 818" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB817 ,Group Status Bit 817" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB816 ,Group Status Bit 816" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB815 ,Group Status Bit 815" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB814 ,Group Status Bit 814" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB813 ,Group Status Bit 813" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB812 ,Group Status Bit 812" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB811 ,Group Status Bit 811" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB810 ,Group Status Bit 810" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB809 ,Group Status Bit 809" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB808 ,Group Status Bit 808" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB807 ,Group Status Bit 807" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB806 ,Group Status Bit 806" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB805 ,Group Status Bit 805" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB804 ,Group Status Bit 804" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB803 ,Group Status Bit 803" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB802 ,Group Status Bit 802" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB801 ,Group Status Bit 801" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB800 ,Group Status Bit 800" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19))
group.long 0x00E4++0x03
line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25"
bitfld.long 0x00 31. " GSB831 ,Group Status Bit 831" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB830 ,Group Status Bit 830" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB829 ,Group Status Bit 829" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB828 ,Group Status Bit 828" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB827 ,Group Status Bit 827" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB826 ,Group Status Bit 826" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB825 ,Group Status Bit 825" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB824 ,Group Status Bit 824" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB823 ,Group Status Bit 823" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB822 ,Group Status Bit 822" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB821 ,Group Status Bit 821" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB820 ,Group Status Bit 820" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB819 ,Group Status Bit 819" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB818 ,Group Status Bit 818" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB817 ,Group Status Bit 817" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB816 ,Group Status Bit 816" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB815 ,Group Status Bit 815" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB814 ,Group Status Bit 814" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB813 ,Group Status Bit 813" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB812 ,Group Status Bit 812" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB811 ,Group Status Bit 811" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB810 ,Group Status Bit 810" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB809 ,Group Status Bit 809" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB808 ,Group Status Bit 808" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB807 ,Group Status Bit 807" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB806 ,Group Status Bit 806" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB805 ,Group Status Bit 805" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB804 ,Group Status Bit 804" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB803 ,Group Status Bit 803" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB802 ,Group Status Bit 802" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB801 ,Group Status Bit 801" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB800 ,Group Status Bit 800" "Group 0,Group 1"
else
hgroup.long 0x00E4++0x03
hide.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A))
group.long 0x00E8++0x03
line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26 (Secure Access)"
bitfld.long 0x00 31. " GSB863 ,Group Status Bit 863" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB862 ,Group Status Bit 862" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB861 ,Group Status Bit 861" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB860 ,Group Status Bit 860" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB859 ,Group Status Bit 859" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB858 ,Group Status Bit 858" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB857 ,Group Status Bit 857" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB856 ,Group Status Bit 856" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB855 ,Group Status Bit 855" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB854 ,Group Status Bit 854" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB853 ,Group Status Bit 853" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB852 ,Group Status Bit 852" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB851 ,Group Status Bit 851" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB850 ,Group Status Bit 850" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB849 ,Group Status Bit 849" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB848 ,Group Status Bit 848" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB847 ,Group Status Bit 847" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB846 ,Group Status Bit 846" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB845 ,Group Status Bit 845" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB844 ,Group Status Bit 844" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB843 ,Group Status Bit 843" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB842 ,Group Status Bit 842" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB841 ,Group Status Bit 841" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB840 ,Group Status Bit 840" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB839 ,Group Status Bit 839" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB838 ,Group Status Bit 838" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB837 ,Group Status Bit 837" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB836 ,Group Status Bit 836" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB835 ,Group Status Bit 835" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB834 ,Group Status Bit 834" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB833 ,Group Status Bit 833" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB832 ,Group Status Bit 832" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A))
group.long 0x00E8++0x03
line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26"
bitfld.long 0x00 31. " GSB863 ,Group Status Bit 863" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB862 ,Group Status Bit 862" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB861 ,Group Status Bit 861" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB860 ,Group Status Bit 860" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB859 ,Group Status Bit 859" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB858 ,Group Status Bit 858" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB857 ,Group Status Bit 857" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB856 ,Group Status Bit 856" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB855 ,Group Status Bit 855" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB854 ,Group Status Bit 854" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB853 ,Group Status Bit 853" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB852 ,Group Status Bit 852" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB851 ,Group Status Bit 851" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB850 ,Group Status Bit 850" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB849 ,Group Status Bit 849" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB848 ,Group Status Bit 848" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB847 ,Group Status Bit 847" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB846 ,Group Status Bit 846" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB845 ,Group Status Bit 845" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB844 ,Group Status Bit 844" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB843 ,Group Status Bit 843" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB842 ,Group Status Bit 842" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB841 ,Group Status Bit 841" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB840 ,Group Status Bit 840" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB839 ,Group Status Bit 839" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB838 ,Group Status Bit 838" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB837 ,Group Status Bit 837" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB836 ,Group Status Bit 836" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB835 ,Group Status Bit 835" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB834 ,Group Status Bit 834" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB833 ,Group Status Bit 833" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB832 ,Group Status Bit 832" "Group 0,Group 1"
else
hgroup.long 0x00E8++0x03
hide.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEC))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B))
group.long 0x00EC++0x03
line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27 (Secure Access)"
bitfld.long 0x00 31. " GSB895 ,Group Status Bit 895" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB894 ,Group Status Bit 894" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB893 ,Group Status Bit 893" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB892 ,Group Status Bit 892" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB891 ,Group Status Bit 891" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB890 ,Group Status Bit 890" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB889 ,Group Status Bit 889" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB888 ,Group Status Bit 888" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB887 ,Group Status Bit 887" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB886 ,Group Status Bit 886" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB885 ,Group Status Bit 885" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB884 ,Group Status Bit 884" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB883 ,Group Status Bit 883" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB882 ,Group Status Bit 882" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB881 ,Group Status Bit 881" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB880 ,Group Status Bit 880" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB879 ,Group Status Bit 879" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB878 ,Group Status Bit 878" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB877 ,Group Status Bit 877" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB876 ,Group Status Bit 876" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB875 ,Group Status Bit 875" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB874 ,Group Status Bit 874" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB873 ,Group Status Bit 873" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB872 ,Group Status Bit 872" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB871 ,Group Status Bit 871" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB870 ,Group Status Bit 870" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB869 ,Group Status Bit 869" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB868 ,Group Status Bit 868" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB867 ,Group Status Bit 867" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB866 ,Group Status Bit 866" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB865 ,Group Status Bit 865" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB864 ,Group Status Bit 864" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B))
group.long 0x00EC++0x03
line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27"
bitfld.long 0x00 31. " GSB895 ,Group Status Bit 895" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB894 ,Group Status Bit 894" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB893 ,Group Status Bit 893" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB892 ,Group Status Bit 892" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB891 ,Group Status Bit 891" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB890 ,Group Status Bit 890" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB889 ,Group Status Bit 889" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB888 ,Group Status Bit 888" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB887 ,Group Status Bit 887" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB886 ,Group Status Bit 886" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB885 ,Group Status Bit 885" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB884 ,Group Status Bit 884" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB883 ,Group Status Bit 883" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB882 ,Group Status Bit 882" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB881 ,Group Status Bit 881" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB880 ,Group Status Bit 880" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB879 ,Group Status Bit 879" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB878 ,Group Status Bit 878" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB877 ,Group Status Bit 877" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB876 ,Group Status Bit 876" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB875 ,Group Status Bit 875" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB874 ,Group Status Bit 874" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB873 ,Group Status Bit 873" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB872 ,Group Status Bit 872" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB871 ,Group Status Bit 871" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB870 ,Group Status Bit 870" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB869 ,Group Status Bit 869" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB868 ,Group Status Bit 868" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB867 ,Group Status Bit 867" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB866 ,Group Status Bit 866" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB865 ,Group Status Bit 865" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB864 ,Group Status Bit 864" "Group 0,Group 1"
else
hgroup.long 0x00EC++0x03
hide.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xF0))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C))
group.long 0x00F0++0x03
line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28 (Secure Access)"
bitfld.long 0x00 31. " GSB927 ,Group Status Bit 927" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB926 ,Group Status Bit 926" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB925 ,Group Status Bit 925" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB924 ,Group Status Bit 924" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB923 ,Group Status Bit 923" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB922 ,Group Status Bit 922" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB921 ,Group Status Bit 921" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB920 ,Group Status Bit 920" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB919 ,Group Status Bit 919" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB918 ,Group Status Bit 918" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB917 ,Group Status Bit 917" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB916 ,Group Status Bit 916" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB915 ,Group Status Bit 915" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB914 ,Group Status Bit 914" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB913 ,Group Status Bit 913" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB912 ,Group Status Bit 912" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB911 ,Group Status Bit 911" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB910 ,Group Status Bit 910" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB909 ,Group Status Bit 909" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB908 ,Group Status Bit 908" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB907 ,Group Status Bit 907" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB906 ,Group Status Bit 906" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB905 ,Group Status Bit 905" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB904 ,Group Status Bit 904" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB903 ,Group Status Bit 903" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB902 ,Group Status Bit 902" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB901 ,Group Status Bit 901" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB900 ,Group Status Bit 900" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB899 ,Group Status Bit 899" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB898 ,Group Status Bit 898" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB897 ,Group Status Bit 897" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB896 ,Group Status Bit 896" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C))
group.long 0x00F0++0x03
line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28"
bitfld.long 0x00 31. " GSB927 ,Group Status Bit 927" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB926 ,Group Status Bit 926" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB925 ,Group Status Bit 925" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB924 ,Group Status Bit 924" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB923 ,Group Status Bit 923" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB922 ,Group Status Bit 922" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB921 ,Group Status Bit 921" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB920 ,Group Status Bit 920" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB919 ,Group Status Bit 919" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB918 ,Group Status Bit 918" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB917 ,Group Status Bit 917" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB916 ,Group Status Bit 916" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB915 ,Group Status Bit 915" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB914 ,Group Status Bit 914" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB913 ,Group Status Bit 913" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB912 ,Group Status Bit 912" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB911 ,Group Status Bit 911" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB910 ,Group Status Bit 910" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB909 ,Group Status Bit 909" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB908 ,Group Status Bit 908" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB907 ,Group Status Bit 907" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB906 ,Group Status Bit 906" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB905 ,Group Status Bit 905" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB904 ,Group Status Bit 904" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB903 ,Group Status Bit 903" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB902 ,Group Status Bit 902" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB901 ,Group Status Bit 901" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB900 ,Group Status Bit 900" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB899 ,Group Status Bit 899" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB898 ,Group Status Bit 898" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB897 ,Group Status Bit 897" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB896 ,Group Status Bit 896" "Group 0,Group 1"
else
hgroup.long 0x00F0++0x03
hide.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xF4))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D))
group.long 0x00F4++0x03
line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29 (Secure Access)"
bitfld.long 0x00 31. " GSB959 ,Group Status Bit 959" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB958 ,Group Status Bit 958" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB957 ,Group Status Bit 957" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB956 ,Group Status Bit 956" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB955 ,Group Status Bit 955" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB954 ,Group Status Bit 954" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB953 ,Group Status Bit 953" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB952 ,Group Status Bit 952" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB951 ,Group Status Bit 951" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB950 ,Group Status Bit 950" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB949 ,Group Status Bit 949" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB948 ,Group Status Bit 948" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB947 ,Group Status Bit 947" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB946 ,Group Status Bit 946" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB945 ,Group Status Bit 945" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB944 ,Group Status Bit 944" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB943 ,Group Status Bit 943" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB942 ,Group Status Bit 942" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB941 ,Group Status Bit 941" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB940 ,Group Status Bit 940" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB939 ,Group Status Bit 939" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB938 ,Group Status Bit 938" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB937 ,Group Status Bit 937" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB936 ,Group Status Bit 936" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB935 ,Group Status Bit 935" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB934 ,Group Status Bit 934" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB933 ,Group Status Bit 933" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB932 ,Group Status Bit 932" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB931 ,Group Status Bit 931" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB930 ,Group Status Bit 930" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB929 ,Group Status Bit 929" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB928 ,Group Status Bit 928" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D))
group.long 0x00F4++0x03
line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29"
bitfld.long 0x00 31. " GSB959 ,Group Status Bit 959" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB958 ,Group Status Bit 958" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB957 ,Group Status Bit 957" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB956 ,Group Status Bit 956" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB955 ,Group Status Bit 955" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB954 ,Group Status Bit 954" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB953 ,Group Status Bit 953" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB952 ,Group Status Bit 952" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB951 ,Group Status Bit 951" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB950 ,Group Status Bit 950" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB949 ,Group Status Bit 949" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB948 ,Group Status Bit 948" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB947 ,Group Status Bit 947" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB946 ,Group Status Bit 946" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB945 ,Group Status Bit 945" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB944 ,Group Status Bit 944" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB943 ,Group Status Bit 943" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB942 ,Group Status Bit 942" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB941 ,Group Status Bit 941" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB940 ,Group Status Bit 940" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB939 ,Group Status Bit 939" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB938 ,Group Status Bit 938" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB937 ,Group Status Bit 937" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB936 ,Group Status Bit 936" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB935 ,Group Status Bit 935" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB934 ,Group Status Bit 934" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB933 ,Group Status Bit 933" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB932 ,Group Status Bit 932" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB931 ,Group Status Bit 931" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB930 ,Group Status Bit 930" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB929 ,Group Status Bit 929" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB928 ,Group Status Bit 928" "Group 0,Group 1"
else
hgroup.long 0x00F4++0x03
hide.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xF8))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E))
group.long 0x00F8++0x03
line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30 (Secure Access)"
bitfld.long 0x00 31. " GSB991 ,Group Status Bit 991" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB990 ,Group Status Bit 990" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB989 ,Group Status Bit 989" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB988 ,Group Status Bit 988" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB987 ,Group Status Bit 987" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB986 ,Group Status Bit 986" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB985 ,Group Status Bit 985" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB984 ,Group Status Bit 984" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB983 ,Group Status Bit 983" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB982 ,Group Status Bit 982" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB981 ,Group Status Bit 981" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB980 ,Group Status Bit 980" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB979 ,Group Status Bit 979" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB978 ,Group Status Bit 978" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB977 ,Group Status Bit 977" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB976 ,Group Status Bit 976" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB975 ,Group Status Bit 975" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB974 ,Group Status Bit 974" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB973 ,Group Status Bit 973" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB972 ,Group Status Bit 972" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB971 ,Group Status Bit 971" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB970 ,Group Status Bit 970" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB969 ,Group Status Bit 969" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB968 ,Group Status Bit 968" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB967 ,Group Status Bit 967" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB966 ,Group Status Bit 966" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB965 ,Group Status Bit 965" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB964 ,Group Status Bit 964" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB963 ,Group Status Bit 963" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB962 ,Group Status Bit 962" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB961 ,Group Status Bit 961" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB960 ,Group Status Bit 960" "Secure,Non-secure Group 1"
elif ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E))
group.long 0x00F8++0x03
line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30"
bitfld.long 0x00 31. " GSB991 ,Group Status Bit 991" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB990 ,Group Status Bit 990" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB989 ,Group Status Bit 989" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. " GSB988 ,Group Status Bit 988" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB987 ,Group Status Bit 987" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB986 ,Group Status Bit 986" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. " GSB985 ,Group Status Bit 985" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB984 ,Group Status Bit 984" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB983 ,Group Status Bit 983" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. " GSB982 ,Group Status Bit 982" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB981 ,Group Status Bit 981" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB980 ,Group Status Bit 980" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. " GSB979 ,Group Status Bit 979" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB978 ,Group Status Bit 978" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB977 ,Group Status Bit 977" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. " GSB976 ,Group Status Bit 976" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB975 ,Group Status Bit 975" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB974 ,Group Status Bit 974" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. " GSB973 ,Group Status Bit 973" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB972 ,Group Status Bit 972" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB971 ,Group Status Bit 971" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. " GSB970 ,Group Status Bit 970" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB969 ,Group Status Bit 969" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB968 ,Group Status Bit 968" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. " GSB967 ,Group Status Bit 967" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB966 ,Group Status Bit 966" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB965 ,Group Status Bit 965" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. " GSB964 ,Group Status Bit 964" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB963 ,Group Status Bit 963" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB962 ,Group Status Bit 962" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. " GSB961 ,Group Status Bit 961" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB960 ,Group Status Bit 960" "Group 0,Group 1"
else
hgroup.long 0x00F8++0x03
hide.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30"
endif
tree.end
width 24.
tree "Set/Clear Enable Registers"
if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10)
hgroup.long 0x0100++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0"
newline
newline
newline
newline
newline
newline
newline
newline
newline
newline
else
group.long 0x0100++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB31   ,Set/Clear Enable Bit 31" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB30   ,Set/Clear Enable Bit 30" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB29   ,Set/Clear Enable Bit 29" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB28   ,Set/Clear Enable Bit 28" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB27   ,Set/Clear Enable Bit 27" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB26   ,Set/Clear Enable Bit 26" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB25   ,Set/Clear Enable Bit 25" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB24   ,Set/Clear Enable Bit 24" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB23   ,Set/Clear Enable Bit 23" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB22   ,Set/Clear Enable Bit 22" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB21   ,Set/Clear Enable Bit 21" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB20   ,Set/Clear Enable Bit 20" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB19   ,Set/Clear Enable Bit 19" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB18   ,Set/Clear Enable Bit 18" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB17   ,Set/Clear Enable Bit 17" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB16   ,Set/Clear Enable Bit 16" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB15   ,Set/Clear Enable Bit 15" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB14   ,Set/Clear Enable Bit 14" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB13   ,Set/Clear Enable Bit 13" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB12   ,Set/Clear Enable Bit 12" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB11   ,Set/Clear Enable Bit 11" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB10   ,Set/Clear Enable Bit 10" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB9    ,Set/Clear Enable Bit 9" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB8    ,Set/Clear Enable Bit 8" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB7    ,Set/Clear Enable Bit 7" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB6    ,Set/Clear Enable Bit 6" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB5    ,Set/Clear Enable Bit 5" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB4    ,Set/Clear Enable Bit 4" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB3    ,Set/Clear Enable Bit 3" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB2    ,Set/Clear Enable Bit 2" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB1    ,Set/Clear Enable Bit 1" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB0    ,Set/Clear Enable Bit 0" "Disabled,Enabled"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01)
group.long 0x0104++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB63   ,Set/Clear Enable Bit 63" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB62   ,Set/Clear Enable Bit 62" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB61   ,Set/Clear Enable Bit 61" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB60   ,Set/Clear Enable Bit 60" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB59   ,Set/Clear Enable Bit 59" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB58   ,Set/Clear Enable Bit 58" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB57   ,Set/Clear Enable Bit 57" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB56   ,Set/Clear Enable Bit 56" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB55   ,Set/Clear Enable Bit 55" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB54   ,Set/Clear Enable Bit 54" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB53   ,Set/Clear Enable Bit 53" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB52   ,Set/Clear Enable Bit 52" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB51   ,Set/Clear Enable Bit 51" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB50   ,Set/Clear Enable Bit 50" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB49   ,Set/Clear Enable Bit 49" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB48   ,Set/Clear Enable Bit 48" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB47   ,Set/Clear Enable Bit 47" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB46   ,Set/Clear Enable Bit 46" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB45   ,Set/Clear Enable Bit 45" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB44   ,Set/Clear Enable Bit 44" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB43   ,Set/Clear Enable Bit 43" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB42   ,Set/Clear Enable Bit 42" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB41   ,Set/Clear Enable Bit 41" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB40   ,Set/Clear Enable Bit 40" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB39   ,Set/Clear Enable Bit 39" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB38   ,Set/Clear Enable Bit 38" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB37   ,Set/Clear Enable Bit 37" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB36   ,Set/Clear Enable Bit 36" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB35   ,Set/Clear Enable Bit 35" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB34   ,Set/Clear Enable Bit 34" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB33   ,Set/Clear Enable Bit 33" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB32   ,Set/Clear Enable Bit 32" "Disabled,Enabled"
else
hgroup.long 0x0104++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02)
group.long 0x0108++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB95   ,Set/Clear Enable Bit 95" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB94   ,Set/Clear Enable Bit 94" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB93   ,Set/Clear Enable Bit 93" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB92   ,Set/Clear Enable Bit 92" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB91   ,Set/Clear Enable Bit 91" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB90   ,Set/Clear Enable Bit 90" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB89   ,Set/Clear Enable Bit 89" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB88   ,Set/Clear Enable Bit 88" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB87   ,Set/Clear Enable Bit 87" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB86   ,Set/Clear Enable Bit 86" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB85   ,Set/Clear Enable Bit 85" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB84   ,Set/Clear Enable Bit 84" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB83   ,Set/Clear Enable Bit 83" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB82   ,Set/Clear Enable Bit 82" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB81   ,Set/Clear Enable Bit 81" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB80   ,Set/Clear Enable Bit 80" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB79   ,Set/Clear Enable Bit 79" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB78   ,Set/Clear Enable Bit 78" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB77   ,Set/Clear Enable Bit 77" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB76   ,Set/Clear Enable Bit 76" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB75   ,Set/Clear Enable Bit 75" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB74   ,Set/Clear Enable Bit 74" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB73   ,Set/Clear Enable Bit 73" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB72   ,Set/Clear Enable Bit 72" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB71   ,Set/Clear Enable Bit 71" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB70   ,Set/Clear Enable Bit 70" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB69   ,Set/Clear Enable Bit 69" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB68   ,Set/Clear Enable Bit 68" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB67   ,Set/Clear Enable Bit 67" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB66   ,Set/Clear Enable Bit 66" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB65   ,Set/Clear Enable Bit 65" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB64   ,Set/Clear Enable Bit 64" "Disabled,Enabled"
else
hgroup.long 0x0108++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03)
group.long 0x010C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB127  ,Set/Clear Enable Bit 127" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB126  ,Set/Clear Enable Bit 126" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB125  ,Set/Clear Enable Bit 125" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB124  ,Set/Clear Enable Bit 124" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB123  ,Set/Clear Enable Bit 123" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB122  ,Set/Clear Enable Bit 122" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB121  ,Set/Clear Enable Bit 121" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB120  ,Set/Clear Enable Bit 120" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB119  ,Set/Clear Enable Bit 119" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB118  ,Set/Clear Enable Bit 118" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB117  ,Set/Clear Enable Bit 117" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB116  ,Set/Clear Enable Bit 116" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB115  ,Set/Clear Enable Bit 115" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB114  ,Set/Clear Enable Bit 114" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB113  ,Set/Clear Enable Bit 113" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB112  ,Set/Clear Enable Bit 112" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB111  ,Set/Clear Enable Bit 111" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB110  ,Set/Clear Enable Bit 110" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB109  ,Set/Clear Enable Bit 109" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB108  ,Set/Clear Enable Bit 108" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB107  ,Set/Clear Enable Bit 107" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB106  ,Set/Clear Enable Bit 106" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB105  ,Set/Clear Enable Bit 105" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB104  ,Set/Clear Enable Bit 104" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB103  ,Set/Clear Enable Bit 103" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB102  ,Set/Clear Enable Bit 102" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB101  ,Set/Clear Enable Bit 101" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB100  ,Set/Clear Enable Bit 100" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB99   ,Set/Clear Enable Bit 99" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB98   ,Set/Clear Enable Bit 98" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB97   ,Set/Clear Enable Bit 97" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB96   ,Set/Clear Enable Bit 96" "Disabled,Enabled"
else
hgroup.long 0x010C++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04)
group.long 0x0110++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB159  ,Set/Clear Enable Bit 159" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB158  ,Set/Clear Enable Bit 158" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB157  ,Set/Clear Enable Bit 157" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB156  ,Set/Clear Enable Bit 156" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB155  ,Set/Clear Enable Bit 155" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB154  ,Set/Clear Enable Bit 154" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB153  ,Set/Clear Enable Bit 153" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB152  ,Set/Clear Enable Bit 152" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB151  ,Set/Clear Enable Bit 151" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB150  ,Set/Clear Enable Bit 150" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB149  ,Set/Clear Enable Bit 149" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB148  ,Set/Clear Enable Bit 148" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB147  ,Set/Clear Enable Bit 147" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB146  ,Set/Clear Enable Bit 146" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB145  ,Set/Clear Enable Bit 145" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB144  ,Set/Clear Enable Bit 144" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB143  ,Set/Clear Enable Bit 143" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB142  ,Set/Clear Enable Bit 142" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB141  ,Set/Clear Enable Bit 141" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB140  ,Set/Clear Enable Bit 140" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB139  ,Set/Clear Enable Bit 139" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB138  ,Set/Clear Enable Bit 138" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB137  ,Set/Clear Enable Bit 137" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB136  ,Set/Clear Enable Bit 136" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB135  ,Set/Clear Enable Bit 135" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB134  ,Set/Clear Enable Bit 134" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB133  ,Set/Clear Enable Bit 133" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB132  ,Set/Clear Enable Bit 132" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB131  ,Set/Clear Enable Bit 131" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB130  ,Set/Clear Enable Bit 130" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB129  ,Set/Clear Enable Bit 129" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB128  ,Set/Clear Enable Bit 128" "Disabled,Enabled"
else
hgroup.long 0x0110++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05)
group.long 0x0114++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB191  ,Set/Clear Enable Bit 191" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB190  ,Set/Clear Enable Bit 190" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB189  ,Set/Clear Enable Bit 189" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB188  ,Set/Clear Enable Bit 188" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB187  ,Set/Clear Enable Bit 187" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB186  ,Set/Clear Enable Bit 186" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB185  ,Set/Clear Enable Bit 185" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB184  ,Set/Clear Enable Bit 184" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB183  ,Set/Clear Enable Bit 183" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB182  ,Set/Clear Enable Bit 182" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB181  ,Set/Clear Enable Bit 181" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB180  ,Set/Clear Enable Bit 180" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB179  ,Set/Clear Enable Bit 179" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB178  ,Set/Clear Enable Bit 178" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB177  ,Set/Clear Enable Bit 177" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB176  ,Set/Clear Enable Bit 176" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB175  ,Set/Clear Enable Bit 175" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB174  ,Set/Clear Enable Bit 174" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB173  ,Set/Clear Enable Bit 173" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB172  ,Set/Clear Enable Bit 172" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB171  ,Set/Clear Enable Bit 171" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB170  ,Set/Clear Enable Bit 170" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB169  ,Set/Clear Enable Bit 169" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB168  ,Set/Clear Enable Bit 168" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB167  ,Set/Clear Enable Bit 167" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB166  ,Set/Clear Enable Bit 166" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB165  ,Set/Clear Enable Bit 165" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB164  ,Set/Clear Enable Bit 164" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB163  ,Set/Clear Enable Bit 163" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB162  ,Set/Clear Enable Bit 162" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB161  ,Set/Clear Enable Bit 161" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB160  ,Set/Clear Enable Bit 160" "Disabled,Enabled"
else
hgroup.long 0x0114++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06)
group.long 0x0118++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB223  ,Set/Clear Enable Bit 223" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB222  ,Set/Clear Enable Bit 222" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB221  ,Set/Clear Enable Bit 221" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB220  ,Set/Clear Enable Bit 220" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB219  ,Set/Clear Enable Bit 219" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB218  ,Set/Clear Enable Bit 218" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB217  ,Set/Clear Enable Bit 217" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB216  ,Set/Clear Enable Bit 216" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB215  ,Set/Clear Enable Bit 215" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB214  ,Set/Clear Enable Bit 214" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB213  ,Set/Clear Enable Bit 213" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB212  ,Set/Clear Enable Bit 212" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB211  ,Set/Clear Enable Bit 211" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB210  ,Set/Clear Enable Bit 210" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB209  ,Set/Clear Enable Bit 209" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB208  ,Set/Clear Enable Bit 208" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB207  ,Set/Clear Enable Bit 207" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB206  ,Set/Clear Enable Bit 206" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB205  ,Set/Clear Enable Bit 205" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB204  ,Set/Clear Enable Bit 204" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB203  ,Set/Clear Enable Bit 203" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB202  ,Set/Clear Enable Bit 202" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB201  ,Set/Clear Enable Bit 201" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB200  ,Set/Clear Enable Bit 200" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB199  ,Set/Clear Enable Bit 199" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB198  ,Set/Clear Enable Bit 198" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB197  ,Set/Clear Enable Bit 197" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB196  ,Set/Clear Enable Bit 196" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB195  ,Set/Clear Enable Bit 195" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB194  ,Set/Clear Enable Bit 194" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB193  ,Set/Clear Enable Bit 193" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB192  ,Set/Clear Enable Bit 192" "Disabled,Enabled"
else
hgroup.long 0x0118++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07)
group.long 0x011C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB255  ,Set/Clear Enable Bit 255" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB254  ,Set/Clear Enable Bit 254" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB253  ,Set/Clear Enable Bit 253" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB252  ,Set/Clear Enable Bit 252" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB251  ,Set/Clear Enable Bit 251" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB250  ,Set/Clear Enable Bit 250" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB249  ,Set/Clear Enable Bit 249" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB248  ,Set/Clear Enable Bit 248" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB247  ,Set/Clear Enable Bit 247" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB246  ,Set/Clear Enable Bit 246" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB245  ,Set/Clear Enable Bit 245" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB244  ,Set/Clear Enable Bit 244" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB243  ,Set/Clear Enable Bit 243" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB242  ,Set/Clear Enable Bit 242" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB241  ,Set/Clear Enable Bit 241" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB240  ,Set/Clear Enable Bit 240" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB239  ,Set/Clear Enable Bit 239" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB238  ,Set/Clear Enable Bit 238" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB237  ,Set/Clear Enable Bit 237" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB236  ,Set/Clear Enable Bit 236" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB235  ,Set/Clear Enable Bit 235" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB234  ,Set/Clear Enable Bit 234" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB233  ,Set/Clear Enable Bit 233" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB232  ,Set/Clear Enable Bit 232" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB231  ,Set/Clear Enable Bit 231" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB230  ,Set/Clear Enable Bit 230" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB229  ,Set/Clear Enable Bit 229" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB228  ,Set/Clear Enable Bit 228" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB227  ,Set/Clear Enable Bit 227" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB226  ,Set/Clear Enable Bit 226" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB225  ,Set/Clear Enable Bit 225" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB224  ,Set/Clear Enable Bit 224" "Disabled,Enabled"
else
hgroup.long 0x011C++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08)
group.long 0x0120++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB287  ,Set/Clear Enable Bit 287" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB286  ,Set/Clear Enable Bit 286" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB285  ,Set/Clear Enable Bit 285" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB284  ,Set/Clear Enable Bit 284" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB283  ,Set/Clear Enable Bit 283" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB282  ,Set/Clear Enable Bit 282" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB281  ,Set/Clear Enable Bit 281" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB280  ,Set/Clear Enable Bit 280" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB279  ,Set/Clear Enable Bit 279" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB278  ,Set/Clear Enable Bit 278" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB277  ,Set/Clear Enable Bit 277" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB276  ,Set/Clear Enable Bit 276" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB275  ,Set/Clear Enable Bit 275" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB274  ,Set/Clear Enable Bit 274" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB273  ,Set/Clear Enable Bit 273" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB272  ,Set/Clear Enable Bit 272" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB271  ,Set/Clear Enable Bit 271" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB270  ,Set/Clear Enable Bit 270" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB269  ,Set/Clear Enable Bit 269" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB268  ,Set/Clear Enable Bit 268" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB267  ,Set/Clear Enable Bit 267" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB266  ,Set/Clear Enable Bit 266" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB265  ,Set/Clear Enable Bit 265" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB264  ,Set/Clear Enable Bit 264" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB263  ,Set/Clear Enable Bit 263" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB262  ,Set/Clear Enable Bit 262" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB261  ,Set/Clear Enable Bit 261" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB260  ,Set/Clear Enable Bit 260" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB259  ,Set/Clear Enable Bit 259" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB258  ,Set/Clear Enable Bit 258" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB257  ,Set/Clear Enable Bit 257" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB256  ,Set/Clear Enable Bit 256" "Disabled,Enabled"
else
hgroup.long 0x0120++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09)
group.long 0x0124++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB319  ,Set/Clear Enable Bit 319" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB318  ,Set/Clear Enable Bit 318" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB317  ,Set/Clear Enable Bit 317" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB316  ,Set/Clear Enable Bit 316" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB315  ,Set/Clear Enable Bit 315" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB314  ,Set/Clear Enable Bit 314" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB313  ,Set/Clear Enable Bit 313" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB312  ,Set/Clear Enable Bit 312" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB311  ,Set/Clear Enable Bit 311" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB310  ,Set/Clear Enable Bit 310" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB309  ,Set/Clear Enable Bit 309" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB308  ,Set/Clear Enable Bit 308" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB307  ,Set/Clear Enable Bit 307" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB306  ,Set/Clear Enable Bit 306" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB305  ,Set/Clear Enable Bit 305" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB304  ,Set/Clear Enable Bit 304" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB303  ,Set/Clear Enable Bit 303" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB302  ,Set/Clear Enable Bit 302" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB301  ,Set/Clear Enable Bit 301" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB300  ,Set/Clear Enable Bit 300" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB299  ,Set/Clear Enable Bit 299" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB298  ,Set/Clear Enable Bit 298" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB297  ,Set/Clear Enable Bit 297" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB296  ,Set/Clear Enable Bit 296" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB295  ,Set/Clear Enable Bit 295" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB294  ,Set/Clear Enable Bit 294" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB293  ,Set/Clear Enable Bit 293" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB292  ,Set/Clear Enable Bit 292" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB291  ,Set/Clear Enable Bit 291" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB290  ,Set/Clear Enable Bit 290" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB289  ,Set/Clear Enable Bit 289" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB288  ,Set/Clear Enable Bit 288" "Disabled,Enabled"
else
hgroup.long 0x0124++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A)
group.long 0x0128++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB351  ,Set/Clear Enable Bit 351" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB350  ,Set/Clear Enable Bit 350" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB349  ,Set/Clear Enable Bit 349" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB348  ,Set/Clear Enable Bit 348" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB347  ,Set/Clear Enable Bit 347" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB346  ,Set/Clear Enable Bit 346" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB345  ,Set/Clear Enable Bit 345" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB344  ,Set/Clear Enable Bit 344" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB343  ,Set/Clear Enable Bit 343" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB342  ,Set/Clear Enable Bit 342" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB341  ,Set/Clear Enable Bit 341" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB340  ,Set/Clear Enable Bit 340" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB339  ,Set/Clear Enable Bit 339" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB338  ,Set/Clear Enable Bit 338" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB337  ,Set/Clear Enable Bit 337" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB336  ,Set/Clear Enable Bit 336" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB335  ,Set/Clear Enable Bit 335" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB334  ,Set/Clear Enable Bit 334" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB333  ,Set/Clear Enable Bit 333" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB332  ,Set/Clear Enable Bit 332" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB331  ,Set/Clear Enable Bit 331" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB330  ,Set/Clear Enable Bit 330" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB329  ,Set/Clear Enable Bit 329" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB328  ,Set/Clear Enable Bit 328" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB327  ,Set/Clear Enable Bit 327" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB326  ,Set/Clear Enable Bit 326" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB325  ,Set/Clear Enable Bit 325" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB324  ,Set/Clear Enable Bit 324" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB323  ,Set/Clear Enable Bit 323" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB322  ,Set/Clear Enable Bit 322" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB321  ,Set/Clear Enable Bit 321" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB320  ,Set/Clear Enable Bit 320" "Disabled,Enabled"
else
hgroup.long 0x0128++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B)
group.long 0x012C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB383  ,Set/Clear Enable Bit 383" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB382  ,Set/Clear Enable Bit 382" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB381  ,Set/Clear Enable Bit 381" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB380  ,Set/Clear Enable Bit 380" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB379  ,Set/Clear Enable Bit 379" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB378  ,Set/Clear Enable Bit 378" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB377  ,Set/Clear Enable Bit 377" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB376  ,Set/Clear Enable Bit 376" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB375  ,Set/Clear Enable Bit 375" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB374  ,Set/Clear Enable Bit 374" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB373  ,Set/Clear Enable Bit 373" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB372  ,Set/Clear Enable Bit 372" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB371  ,Set/Clear Enable Bit 371" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB370  ,Set/Clear Enable Bit 370" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB369  ,Set/Clear Enable Bit 369" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB368  ,Set/Clear Enable Bit 368" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB367  ,Set/Clear Enable Bit 367" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB366  ,Set/Clear Enable Bit 366" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB365  ,Set/Clear Enable Bit 365" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB364  ,Set/Clear Enable Bit 364" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB363  ,Set/Clear Enable Bit 363" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB362  ,Set/Clear Enable Bit 362" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB361  ,Set/Clear Enable Bit 361" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB360  ,Set/Clear Enable Bit 360" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB359  ,Set/Clear Enable Bit 359" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB358  ,Set/Clear Enable Bit 358" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB357  ,Set/Clear Enable Bit 357" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB356  ,Set/Clear Enable Bit 356" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB355  ,Set/Clear Enable Bit 355" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB354  ,Set/Clear Enable Bit 354" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB353  ,Set/Clear Enable Bit 353" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB352  ,Set/Clear Enable Bit 352" "Disabled,Enabled"
else
hgroup.long 0x012C++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C)
group.long 0x0130++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB415  ,Set/Clear Enable Bit 415" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB414  ,Set/Clear Enable Bit 414" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB413  ,Set/Clear Enable Bit 413" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB412  ,Set/Clear Enable Bit 412" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB411  ,Set/Clear Enable Bit 411" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB410  ,Set/Clear Enable Bit 410" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB409  ,Set/Clear Enable Bit 409" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB408  ,Set/Clear Enable Bit 408" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB407  ,Set/Clear Enable Bit 407" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB406  ,Set/Clear Enable Bit 406" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB405  ,Set/Clear Enable Bit 405" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB404  ,Set/Clear Enable Bit 404" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB403  ,Set/Clear Enable Bit 403" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB402  ,Set/Clear Enable Bit 402" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB401  ,Set/Clear Enable Bit 401" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB400  ,Set/Clear Enable Bit 400" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB399  ,Set/Clear Enable Bit 399" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB398  ,Set/Clear Enable Bit 398" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB397  ,Set/Clear Enable Bit 397" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB396  ,Set/Clear Enable Bit 396" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB395  ,Set/Clear Enable Bit 395" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB394  ,Set/Clear Enable Bit 394" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB393  ,Set/Clear Enable Bit 393" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB392  ,Set/Clear Enable Bit 392" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB391  ,Set/Clear Enable Bit 391" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB390  ,Set/Clear Enable Bit 390" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB389  ,Set/Clear Enable Bit 389" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB388  ,Set/Clear Enable Bit 388" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB387  ,Set/Clear Enable Bit 387" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB386  ,Set/Clear Enable Bit 386" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB385  ,Set/Clear Enable Bit 385" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB384  ,Set/Clear Enable Bit 384" "Disabled,Enabled"
else
hgroup.long 0x0130++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D)
group.long 0x0134++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB447  ,Set/Clear Enable Bit 447" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB446  ,Set/Clear Enable Bit 446" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB445  ,Set/Clear Enable Bit 445" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB444  ,Set/Clear Enable Bit 444" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB443  ,Set/Clear Enable Bit 443" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB442  ,Set/Clear Enable Bit 442" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB441  ,Set/Clear Enable Bit 441" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB440  ,Set/Clear Enable Bit 440" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB439  ,Set/Clear Enable Bit 439" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB438  ,Set/Clear Enable Bit 438" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB437  ,Set/Clear Enable Bit 437" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB436  ,Set/Clear Enable Bit 436" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB435  ,Set/Clear Enable Bit 435" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB434  ,Set/Clear Enable Bit 434" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB433  ,Set/Clear Enable Bit 433" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB432  ,Set/Clear Enable Bit 432" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB431  ,Set/Clear Enable Bit 431" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB430  ,Set/Clear Enable Bit 430" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB429  ,Set/Clear Enable Bit 429" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB428  ,Set/Clear Enable Bit 428" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB427  ,Set/Clear Enable Bit 427" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB426  ,Set/Clear Enable Bit 426" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB425  ,Set/Clear Enable Bit 425" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB424  ,Set/Clear Enable Bit 424" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB423  ,Set/Clear Enable Bit 423" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB422  ,Set/Clear Enable Bit 422" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB421  ,Set/Clear Enable Bit 421" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB420  ,Set/Clear Enable Bit 420" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB419  ,Set/Clear Enable Bit 419" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB418  ,Set/Clear Enable Bit 418" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB417  ,Set/Clear Enable Bit 417" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB416  ,Set/Clear Enable Bit 416" "Disabled,Enabled"
else
hgroup.long 0x0134++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E)
group.long 0x0138++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB479  ,Set/Clear Enable Bit 479" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB478  ,Set/Clear Enable Bit 478" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB477  ,Set/Clear Enable Bit 477" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB476  ,Set/Clear Enable Bit 476" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB475  ,Set/Clear Enable Bit 475" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB474  ,Set/Clear Enable Bit 474" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB473  ,Set/Clear Enable Bit 473" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB472  ,Set/Clear Enable Bit 472" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB471  ,Set/Clear Enable Bit 471" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB470  ,Set/Clear Enable Bit 470" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB469  ,Set/Clear Enable Bit 469" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB468  ,Set/Clear Enable Bit 468" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB467  ,Set/Clear Enable Bit 467" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB466  ,Set/Clear Enable Bit 466" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB465  ,Set/Clear Enable Bit 465" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB464  ,Set/Clear Enable Bit 464" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB463  ,Set/Clear Enable Bit 463" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB462  ,Set/Clear Enable Bit 462" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB461  ,Set/Clear Enable Bit 461" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB460  ,Set/Clear Enable Bit 460" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB459  ,Set/Clear Enable Bit 459" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB458  ,Set/Clear Enable Bit 458" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB457  ,Set/Clear Enable Bit 457" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB456  ,Set/Clear Enable Bit 456" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB455  ,Set/Clear Enable Bit 455" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB454  ,Set/Clear Enable Bit 454" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB453  ,Set/Clear Enable Bit 453" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB452  ,Set/Clear Enable Bit 452" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB451  ,Set/Clear Enable Bit 451" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB450  ,Set/Clear Enable Bit 450" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB449  ,Set/Clear Enable Bit 449" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB448  ,Set/Clear Enable Bit 448" "Disabled,Enabled"
else
hgroup.long 0x0138++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F)
group.long 0x013C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB511  ,Set/Clear Enable Bit 511" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB510  ,Set/Clear Enable Bit 510" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB509  ,Set/Clear Enable Bit 509" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB508  ,Set/Clear Enable Bit 508" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB507  ,Set/Clear Enable Bit 507" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB506  ,Set/Clear Enable Bit 506" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB505  ,Set/Clear Enable Bit 505" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB504  ,Set/Clear Enable Bit 504" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB503  ,Set/Clear Enable Bit 503" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB502  ,Set/Clear Enable Bit 502" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB501  ,Set/Clear Enable Bit 501" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB500  ,Set/Clear Enable Bit 500" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB499  ,Set/Clear Enable Bit 499" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB498  ,Set/Clear Enable Bit 498" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB497  ,Set/Clear Enable Bit 497" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB496  ,Set/Clear Enable Bit 496" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB495  ,Set/Clear Enable Bit 495" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB494  ,Set/Clear Enable Bit 494" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB493  ,Set/Clear Enable Bit 493" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB492  ,Set/Clear Enable Bit 492" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB491  ,Set/Clear Enable Bit 491" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB490  ,Set/Clear Enable Bit 490" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB489  ,Set/Clear Enable Bit 489" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB488  ,Set/Clear Enable Bit 488" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB487  ,Set/Clear Enable Bit 487" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB486  ,Set/Clear Enable Bit 486" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB485  ,Set/Clear Enable Bit 485" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB484  ,Set/Clear Enable Bit 484" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB483  ,Set/Clear Enable Bit 483" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB482  ,Set/Clear Enable Bit 482" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB481  ,Set/Clear Enable Bit 481" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB480  ,Set/Clear Enable Bit 480" "Disabled,Enabled"
else
hgroup.long 0x013C++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)
group.long 0x0140++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB543  ,Set/Clear Enable Bit 543" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB542  ,Set/Clear Enable Bit 542" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB541  ,Set/Clear Enable Bit 541" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB540  ,Set/Clear Enable Bit 540" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB539  ,Set/Clear Enable Bit 539" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB538  ,Set/Clear Enable Bit 538" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB537  ,Set/Clear Enable Bit 537" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB536  ,Set/Clear Enable Bit 536" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB535  ,Set/Clear Enable Bit 535" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB534  ,Set/Clear Enable Bit 534" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB533  ,Set/Clear Enable Bit 533" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB532  ,Set/Clear Enable Bit 532" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB531  ,Set/Clear Enable Bit 531" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB530  ,Set/Clear Enable Bit 530" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB529  ,Set/Clear Enable Bit 529" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB528  ,Set/Clear Enable Bit 528" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB527  ,Set/Clear Enable Bit 527" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB526  ,Set/Clear Enable Bit 526" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB525  ,Set/Clear Enable Bit 525" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB524  ,Set/Clear Enable Bit 524" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB523  ,Set/Clear Enable Bit 523" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB522  ,Set/Clear Enable Bit 522" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB521  ,Set/Clear Enable Bit 521" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB520  ,Set/Clear Enable Bit 520" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB519  ,Set/Clear Enable Bit 519" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB518  ,Set/Clear Enable Bit 518" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB517  ,Set/Clear Enable Bit 517" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB516  ,Set/Clear Enable Bit 516" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB515  ,Set/Clear Enable Bit 515" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB514  ,Set/Clear Enable Bit 514" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB513  ,Set/Clear Enable Bit 513" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB512  ,Set/Clear Enable Bit 512" "Disabled,Enabled"
else
hgroup.long 0x0140++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)
group.long 0x0144++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB575  ,Set/Clear Enable Bit 575" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB574  ,Set/Clear Enable Bit 574" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB573  ,Set/Clear Enable Bit 573" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB572  ,Set/Clear Enable Bit 572" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB571  ,Set/Clear Enable Bit 571" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB570  ,Set/Clear Enable Bit 570" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB569  ,Set/Clear Enable Bit 569" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB568  ,Set/Clear Enable Bit 568" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB567  ,Set/Clear Enable Bit 567" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB566  ,Set/Clear Enable Bit 566" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB565  ,Set/Clear Enable Bit 565" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB564  ,Set/Clear Enable Bit 564" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB563  ,Set/Clear Enable Bit 563" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB562  ,Set/Clear Enable Bit 562" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB561  ,Set/Clear Enable Bit 561" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB560  ,Set/Clear Enable Bit 560" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB559  ,Set/Clear Enable Bit 559" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB558  ,Set/Clear Enable Bit 558" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB557  ,Set/Clear Enable Bit 557" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB556  ,Set/Clear Enable Bit 556" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB555  ,Set/Clear Enable Bit 555" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB554  ,Set/Clear Enable Bit 554" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB553  ,Set/Clear Enable Bit 553" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB552  ,Set/Clear Enable Bit 552" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB551  ,Set/Clear Enable Bit 551" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB550  ,Set/Clear Enable Bit 550" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB549  ,Set/Clear Enable Bit 549" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB548  ,Set/Clear Enable Bit 548" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB547  ,Set/Clear Enable Bit 547" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB546  ,Set/Clear Enable Bit 546" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB545  ,Set/Clear Enable Bit 545" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB544  ,Set/Clear Enable Bit 544" "Disabled,Enabled"
else
hgroup.long 0x0144++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)
group.long 0x0148++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB607  ,Set/Clear Enable Bit 607" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB606  ,Set/Clear Enable Bit 606" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB605  ,Set/Clear Enable Bit 605" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB604  ,Set/Clear Enable Bit 604" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB603  ,Set/Clear Enable Bit 603" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB602  ,Set/Clear Enable Bit 602" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB601  ,Set/Clear Enable Bit 601" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB600  ,Set/Clear Enable Bit 600" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB599  ,Set/Clear Enable Bit 599" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB598  ,Set/Clear Enable Bit 598" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB597  ,Set/Clear Enable Bit 597" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB596  ,Set/Clear Enable Bit 596" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB595  ,Set/Clear Enable Bit 595" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB594  ,Set/Clear Enable Bit 594" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB593  ,Set/Clear Enable Bit 593" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB592  ,Set/Clear Enable Bit 592" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB591  ,Set/Clear Enable Bit 591" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB590  ,Set/Clear Enable Bit 590" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB589  ,Set/Clear Enable Bit 589" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB588  ,Set/Clear Enable Bit 588" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB587  ,Set/Clear Enable Bit 587" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB586  ,Set/Clear Enable Bit 586" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB585  ,Set/Clear Enable Bit 585" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB584  ,Set/Clear Enable Bit 584" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB583  ,Set/Clear Enable Bit 583" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB582  ,Set/Clear Enable Bit 582" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB581  ,Set/Clear Enable Bit 581" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB580  ,Set/Clear Enable Bit 580" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB579  ,Set/Clear Enable Bit 579" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB578  ,Set/Clear Enable Bit 578" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB577  ,Set/Clear Enable Bit 577" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB576  ,Set/Clear Enable Bit 576" "Disabled,Enabled"
else
hgroup.long 0x0148++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)
group.long 0x014C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB639  ,Set/Clear Enable Bit 639" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB638  ,Set/Clear Enable Bit 638" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB637  ,Set/Clear Enable Bit 637" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB636  ,Set/Clear Enable Bit 636" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB635  ,Set/Clear Enable Bit 635" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB634  ,Set/Clear Enable Bit 634" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB633  ,Set/Clear Enable Bit 633" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB632  ,Set/Clear Enable Bit 632" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB631  ,Set/Clear Enable Bit 631" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB630  ,Set/Clear Enable Bit 630" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB629  ,Set/Clear Enable Bit 629" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB628  ,Set/Clear Enable Bit 628" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB627  ,Set/Clear Enable Bit 627" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB626  ,Set/Clear Enable Bit 626" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB625  ,Set/Clear Enable Bit 625" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB624  ,Set/Clear Enable Bit 624" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB623  ,Set/Clear Enable Bit 623" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB622  ,Set/Clear Enable Bit 622" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB621  ,Set/Clear Enable Bit 621" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB620  ,Set/Clear Enable Bit 620" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB619  ,Set/Clear Enable Bit 619" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB618  ,Set/Clear Enable Bit 618" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB617  ,Set/Clear Enable Bit 617" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB616  ,Set/Clear Enable Bit 616" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB615  ,Set/Clear Enable Bit 615" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB614  ,Set/Clear Enable Bit 614" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB613  ,Set/Clear Enable Bit 613" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB612  ,Set/Clear Enable Bit 612" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB611  ,Set/Clear Enable Bit 611" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB610  ,Set/Clear Enable Bit 610" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB609  ,Set/Clear Enable Bit 609" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB608  ,Set/Clear Enable Bit 608" "Disabled,Enabled"
else
hgroup.long 0x014C++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)
group.long 0x0150++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB671  ,Set/Clear Enable Bit 671" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB670  ,Set/Clear Enable Bit 670" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB669  ,Set/Clear Enable Bit 669" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB668  ,Set/Clear Enable Bit 668" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB667  ,Set/Clear Enable Bit 667" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB666  ,Set/Clear Enable Bit 666" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB665  ,Set/Clear Enable Bit 665" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB664  ,Set/Clear Enable Bit 664" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB663  ,Set/Clear Enable Bit 663" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB662  ,Set/Clear Enable Bit 662" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB661  ,Set/Clear Enable Bit 661" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB660  ,Set/Clear Enable Bit 660" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB659  ,Set/Clear Enable Bit 659" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB658  ,Set/Clear Enable Bit 658" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB657  ,Set/Clear Enable Bit 657" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB656  ,Set/Clear Enable Bit 656" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB655  ,Set/Clear Enable Bit 655" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB654  ,Set/Clear Enable Bit 654" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB653  ,Set/Clear Enable Bit 653" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB652  ,Set/Clear Enable Bit 652" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB651  ,Set/Clear Enable Bit 651" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB650  ,Set/Clear Enable Bit 650" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB649  ,Set/Clear Enable Bit 649" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB648  ,Set/Clear Enable Bit 648" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB647  ,Set/Clear Enable Bit 647" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB646  ,Set/Clear Enable Bit 646" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB645  ,Set/Clear Enable Bit 645" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB644  ,Set/Clear Enable Bit 644" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB643  ,Set/Clear Enable Bit 643" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB642  ,Set/Clear Enable Bit 642" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB641  ,Set/Clear Enable Bit 641" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB640  ,Set/Clear Enable Bit 640" "Disabled,Enabled"
else
hgroup.long 0x0150++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)
group.long 0x0154++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB703  ,Set/Clear Enable Bit 703" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB702  ,Set/Clear Enable Bit 702" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB701  ,Set/Clear Enable Bit 701" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB700  ,Set/Clear Enable Bit 700" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB699  ,Set/Clear Enable Bit 699" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB698  ,Set/Clear Enable Bit 698" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB697  ,Set/Clear Enable Bit 697" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB696  ,Set/Clear Enable Bit 696" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB695  ,Set/Clear Enable Bit 695" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB694  ,Set/Clear Enable Bit 694" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB693  ,Set/Clear Enable Bit 693" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB692  ,Set/Clear Enable Bit 692" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB691  ,Set/Clear Enable Bit 691" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB690  ,Set/Clear Enable Bit 690" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB689  ,Set/Clear Enable Bit 689" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB688  ,Set/Clear Enable Bit 688" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB687  ,Set/Clear Enable Bit 687" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB686  ,Set/Clear Enable Bit 686" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB685  ,Set/Clear Enable Bit 685" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB684  ,Set/Clear Enable Bit 684" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB683  ,Set/Clear Enable Bit 683" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB682  ,Set/Clear Enable Bit 682" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB681  ,Set/Clear Enable Bit 681" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB680  ,Set/Clear Enable Bit 680" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB679  ,Set/Clear Enable Bit 679" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB678  ,Set/Clear Enable Bit 678" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB677  ,Set/Clear Enable Bit 677" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB676  ,Set/Clear Enable Bit 676" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB675  ,Set/Clear Enable Bit 675" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB674  ,Set/Clear Enable Bit 674" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB673  ,Set/Clear Enable Bit 673" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB672  ,Set/Clear Enable Bit 672" "Disabled,Enabled"
else
hgroup.long 0x0154++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)
group.long 0x0158++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB735  ,Set/Clear Enable Bit 735" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB734  ,Set/Clear Enable Bit 734" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB733  ,Set/Clear Enable Bit 733" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB732  ,Set/Clear Enable Bit 732" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB731  ,Set/Clear Enable Bit 731" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB730  ,Set/Clear Enable Bit 730" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB729  ,Set/Clear Enable Bit 729" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB728  ,Set/Clear Enable Bit 728" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB727  ,Set/Clear Enable Bit 727" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB726  ,Set/Clear Enable Bit 726" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB725  ,Set/Clear Enable Bit 725" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB724  ,Set/Clear Enable Bit 724" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB723  ,Set/Clear Enable Bit 723" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB722  ,Set/Clear Enable Bit 722" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB721  ,Set/Clear Enable Bit 721" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB720  ,Set/Clear Enable Bit 720" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB719  ,Set/Clear Enable Bit 719" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB718  ,Set/Clear Enable Bit 718" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB717  ,Set/Clear Enable Bit 717" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB716  ,Set/Clear Enable Bit 716" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB715  ,Set/Clear Enable Bit 715" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB714  ,Set/Clear Enable Bit 714" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB713  ,Set/Clear Enable Bit 713" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB712  ,Set/Clear Enable Bit 712" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB711  ,Set/Clear Enable Bit 711" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB710  ,Set/Clear Enable Bit 710" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB709  ,Set/Clear Enable Bit 709" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB708  ,Set/Clear Enable Bit 708" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB707  ,Set/Clear Enable Bit 707" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB706  ,Set/Clear Enable Bit 706" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB705  ,Set/Clear Enable Bit 705" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB704  ,Set/Clear Enable Bit 704" "Disabled,Enabled"
else
hgroup.long 0x0158++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)
group.long 0x015C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB767  ,Set/Clear Enable Bit 767" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB766  ,Set/Clear Enable Bit 766" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB765  ,Set/Clear Enable Bit 765" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB764  ,Set/Clear Enable Bit 764" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB763  ,Set/Clear Enable Bit 763" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB762  ,Set/Clear Enable Bit 762" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB761  ,Set/Clear Enable Bit 761" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB760  ,Set/Clear Enable Bit 760" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB759  ,Set/Clear Enable Bit 759" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB758  ,Set/Clear Enable Bit 758" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB757  ,Set/Clear Enable Bit 757" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB756  ,Set/Clear Enable Bit 756" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB755  ,Set/Clear Enable Bit 755" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB754  ,Set/Clear Enable Bit 754" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB753  ,Set/Clear Enable Bit 753" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB752  ,Set/Clear Enable Bit 752" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB751  ,Set/Clear Enable Bit 751" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB750  ,Set/Clear Enable Bit 750" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB749  ,Set/Clear Enable Bit 749" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB748  ,Set/Clear Enable Bit 748" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB747  ,Set/Clear Enable Bit 747" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB746  ,Set/Clear Enable Bit 746" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB745  ,Set/Clear Enable Bit 745" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB744  ,Set/Clear Enable Bit 744" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB743  ,Set/Clear Enable Bit 743" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB742  ,Set/Clear Enable Bit 742" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB741  ,Set/Clear Enable Bit 741" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB740  ,Set/Clear Enable Bit 740" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB739  ,Set/Clear Enable Bit 739" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB738  ,Set/Clear Enable Bit 738" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB737  ,Set/Clear Enable Bit 737" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB736  ,Set/Clear Enable Bit 736" "Disabled,Enabled"
else
hgroup.long 0x015C++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)
group.long 0x0160++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB799  ,Set/Clear Enable Bit 799" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB798  ,Set/Clear Enable Bit 798" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB797  ,Set/Clear Enable Bit 797" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB796  ,Set/Clear Enable Bit 796" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB795  ,Set/Clear Enable Bit 795" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB794  ,Set/Clear Enable Bit 794" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB793  ,Set/Clear Enable Bit 793" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB792  ,Set/Clear Enable Bit 792" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB791  ,Set/Clear Enable Bit 791" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB790  ,Set/Clear Enable Bit 790" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB789  ,Set/Clear Enable Bit 789" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB788  ,Set/Clear Enable Bit 788" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB787  ,Set/Clear Enable Bit 787" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB786  ,Set/Clear Enable Bit 786" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB785  ,Set/Clear Enable Bit 785" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB784  ,Set/Clear Enable Bit 784" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB783  ,Set/Clear Enable Bit 783" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB782  ,Set/Clear Enable Bit 782" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB781  ,Set/Clear Enable Bit 781" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB780  ,Set/Clear Enable Bit 780" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB779  ,Set/Clear Enable Bit 779" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB778  ,Set/Clear Enable Bit 778" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB777  ,Set/Clear Enable Bit 777" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB776  ,Set/Clear Enable Bit 776" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB775  ,Set/Clear Enable Bit 775" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB774  ,Set/Clear Enable Bit 774" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB773  ,Set/Clear Enable Bit 773" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB772  ,Set/Clear Enable Bit 772" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB771  ,Set/Clear Enable Bit 771" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB770  ,Set/Clear Enable Bit 770" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB769  ,Set/Clear Enable Bit 769" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB768  ,Set/Clear Enable Bit 768" "Disabled,Enabled"
else
hgroup.long 0x0160++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)
group.long 0x0164++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB831  ,Set/Clear Enable Bit 831" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB830  ,Set/Clear Enable Bit 830" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB829  ,Set/Clear Enable Bit 829" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB828  ,Set/Clear Enable Bit 828" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB827  ,Set/Clear Enable Bit 827" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB826  ,Set/Clear Enable Bit 826" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB825  ,Set/Clear Enable Bit 825" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB824  ,Set/Clear Enable Bit 824" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB823  ,Set/Clear Enable Bit 823" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB822  ,Set/Clear Enable Bit 822" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB821  ,Set/Clear Enable Bit 821" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB820  ,Set/Clear Enable Bit 820" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB819  ,Set/Clear Enable Bit 819" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB818  ,Set/Clear Enable Bit 818" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB817  ,Set/Clear Enable Bit 817" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB816  ,Set/Clear Enable Bit 816" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB815  ,Set/Clear Enable Bit 815" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB814  ,Set/Clear Enable Bit 814" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB813  ,Set/Clear Enable Bit 813" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB812  ,Set/Clear Enable Bit 812" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB811  ,Set/Clear Enable Bit 811" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB810  ,Set/Clear Enable Bit 810" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB809  ,Set/Clear Enable Bit 809" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB808  ,Set/Clear Enable Bit 808" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB807  ,Set/Clear Enable Bit 807" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB806  ,Set/Clear Enable Bit 806" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB805  ,Set/Clear Enable Bit 805" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB804  ,Set/Clear Enable Bit 804" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB803  ,Set/Clear Enable Bit 803" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB802  ,Set/Clear Enable Bit 802" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB801  ,Set/Clear Enable Bit 801" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB800  ,Set/Clear Enable Bit 800" "Disabled,Enabled"
else
hgroup.long 0x0164++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A)
group.long 0x0168++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB863  ,Set/Clear Enable Bit 863" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB862  ,Set/Clear Enable Bit 862" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB861  ,Set/Clear Enable Bit 861" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB860  ,Set/Clear Enable Bit 860" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB859  ,Set/Clear Enable Bit 859" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB858  ,Set/Clear Enable Bit 858" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB857  ,Set/Clear Enable Bit 857" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB856  ,Set/Clear Enable Bit 856" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB855  ,Set/Clear Enable Bit 855" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB854  ,Set/Clear Enable Bit 854" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB853  ,Set/Clear Enable Bit 853" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB852  ,Set/Clear Enable Bit 852" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB851  ,Set/Clear Enable Bit 851" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB850  ,Set/Clear Enable Bit 850" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB849  ,Set/Clear Enable Bit 849" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB848  ,Set/Clear Enable Bit 848" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB847  ,Set/Clear Enable Bit 847" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB846  ,Set/Clear Enable Bit 846" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB845  ,Set/Clear Enable Bit 845" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB844  ,Set/Clear Enable Bit 844" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB843  ,Set/Clear Enable Bit 843" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB842  ,Set/Clear Enable Bit 842" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB841  ,Set/Clear Enable Bit 841" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB840  ,Set/Clear Enable Bit 840" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB839  ,Set/Clear Enable Bit 839" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB838  ,Set/Clear Enable Bit 838" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB837  ,Set/Clear Enable Bit 837" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB836  ,Set/Clear Enable Bit 836" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB835  ,Set/Clear Enable Bit 835" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB834  ,Set/Clear Enable Bit 834" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB833  ,Set/Clear Enable Bit 833" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB832  ,Set/Clear Enable Bit 832" "Disabled,Enabled"
else
hgroup.long 0x0168++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)
group.long 0x016C++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB895  ,Set/Clear Enable Bit 895" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB894  ,Set/Clear Enable Bit 894" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB893  ,Set/Clear Enable Bit 893" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB892  ,Set/Clear Enable Bit 892" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB891  ,Set/Clear Enable Bit 891" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB890  ,Set/Clear Enable Bit 890" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB889  ,Set/Clear Enable Bit 889" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB888  ,Set/Clear Enable Bit 888" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB887  ,Set/Clear Enable Bit 887" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB886  ,Set/Clear Enable Bit 886" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB885  ,Set/Clear Enable Bit 885" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB884  ,Set/Clear Enable Bit 884" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB883  ,Set/Clear Enable Bit 883" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB882  ,Set/Clear Enable Bit 882" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB881  ,Set/Clear Enable Bit 881" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB880  ,Set/Clear Enable Bit 880" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB879  ,Set/Clear Enable Bit 879" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB878  ,Set/Clear Enable Bit 878" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB877  ,Set/Clear Enable Bit 877" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB876  ,Set/Clear Enable Bit 876" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB875  ,Set/Clear Enable Bit 875" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB874  ,Set/Clear Enable Bit 874" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB873  ,Set/Clear Enable Bit 873" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB872  ,Set/Clear Enable Bit 872" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB871  ,Set/Clear Enable Bit 871" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB870  ,Set/Clear Enable Bit 870" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB869  ,Set/Clear Enable Bit 869" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB868  ,Set/Clear Enable Bit 868" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB867  ,Set/Clear Enable Bit 867" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB866  ,Set/Clear Enable Bit 866" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB865  ,Set/Clear Enable Bit 865" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB864  ,Set/Clear Enable Bit 864" "Disabled,Enabled"
else
hgroup.long 0x016C++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)
group.long 0x0170++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB927  ,Set/Clear Enable Bit 927" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB926  ,Set/Clear Enable Bit 926" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB925  ,Set/Clear Enable Bit 925" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB924  ,Set/Clear Enable Bit 924" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB923  ,Set/Clear Enable Bit 923" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB922  ,Set/Clear Enable Bit 922" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB921  ,Set/Clear Enable Bit 921" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB920  ,Set/Clear Enable Bit 920" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB919  ,Set/Clear Enable Bit 919" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB918  ,Set/Clear Enable Bit 918" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB917  ,Set/Clear Enable Bit 917" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB916  ,Set/Clear Enable Bit 916" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB915  ,Set/Clear Enable Bit 915" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB914  ,Set/Clear Enable Bit 914" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB913  ,Set/Clear Enable Bit 913" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB912  ,Set/Clear Enable Bit 912" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB911  ,Set/Clear Enable Bit 911" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB910  ,Set/Clear Enable Bit 910" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB909  ,Set/Clear Enable Bit 909" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB908  ,Set/Clear Enable Bit 908" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB907  ,Set/Clear Enable Bit 907" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB906  ,Set/Clear Enable Bit 906" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB905  ,Set/Clear Enable Bit 905" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB904  ,Set/Clear Enable Bit 904" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB903  ,Set/Clear Enable Bit 903" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB902  ,Set/Clear Enable Bit 902" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB901  ,Set/Clear Enable Bit 901" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB900  ,Set/Clear Enable Bit 900" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB899  ,Set/Clear Enable Bit 899" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB898  ,Set/Clear Enable Bit 898" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB897  ,Set/Clear Enable Bit 897" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB896  ,Set/Clear Enable Bit 896" "Disabled,Enabled"
else
hgroup.long 0x0170++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)
group.long 0x0174++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB959  ,Set/Clear Enable Bit 959" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB958  ,Set/Clear Enable Bit 958" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB957  ,Set/Clear Enable Bit 957" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB956  ,Set/Clear Enable Bit 956" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB955  ,Set/Clear Enable Bit 955" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB954  ,Set/Clear Enable Bit 954" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB953  ,Set/Clear Enable Bit 953" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB952  ,Set/Clear Enable Bit 952" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB951  ,Set/Clear Enable Bit 951" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB950  ,Set/Clear Enable Bit 950" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB949  ,Set/Clear Enable Bit 949" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB948  ,Set/Clear Enable Bit 948" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB947  ,Set/Clear Enable Bit 947" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB946  ,Set/Clear Enable Bit 946" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB945  ,Set/Clear Enable Bit 945" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB944  ,Set/Clear Enable Bit 944" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB943  ,Set/Clear Enable Bit 943" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB942  ,Set/Clear Enable Bit 942" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB941  ,Set/Clear Enable Bit 941" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB940  ,Set/Clear Enable Bit 940" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB939  ,Set/Clear Enable Bit 939" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB938  ,Set/Clear Enable Bit 938" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB937  ,Set/Clear Enable Bit 937" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB936  ,Set/Clear Enable Bit 936" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB935  ,Set/Clear Enable Bit 935" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB934  ,Set/Clear Enable Bit 934" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB933  ,Set/Clear Enable Bit 933" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB932  ,Set/Clear Enable Bit 932" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB931  ,Set/Clear Enable Bit 931" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB930  ,Set/Clear Enable Bit 930" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB929  ,Set/Clear Enable Bit 929" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB928  ,Set/Clear Enable Bit 928" "Disabled,Enabled"
else
hgroup.long 0x0174++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)
group.long 0x0178++0x03
line.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB991  ,Set/Clear Enable Bit 991" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRENB990  ,Set/Clear Enable Bit 990" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRENB989  ,Set/Clear Enable Bit 989" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB988  ,Set/Clear Enable Bit 988" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRENB987  ,Set/Clear Enable Bit 987" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRENB986  ,Set/Clear Enable Bit 986" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB985  ,Set/Clear Enable Bit 985" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRENB984  ,Set/Clear Enable Bit 984" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRENB983  ,Set/Clear Enable Bit 983" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB982  ,Set/Clear Enable Bit 982" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRENB981  ,Set/Clear Enable Bit 981" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRENB980  ,Set/Clear Enable Bit 980" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB979  ,Set/Clear Enable Bit 979" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRENB978  ,Set/Clear Enable Bit 978" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRENB977  ,Set/Clear Enable Bit 977" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB976  ,Set/Clear Enable Bit 976" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRENB975  ,Set/Clear Enable Bit 975" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRENB974  ,Set/Clear Enable Bit 974" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB973  ,Set/Clear Enable Bit 973" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRENB972  ,Set/Clear Enable Bit 972" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRENB971  ,Set/Clear Enable Bit 971" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB970  ,Set/Clear Enable Bit 970" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRENB969  ,Set/Clear Enable Bit 969" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRENB968  ,Set/Clear Enable Bit 968" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB967  ,Set/Clear Enable Bit 967" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRENB966  ,Set/Clear Enable Bit 966" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRENB965  ,Set/Clear Enable Bit 965" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB964  ,Set/Clear Enable Bit 964" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRENB963  ,Set/Clear Enable Bit 963" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRENB962  ,Set/Clear Enable Bit 962" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB961  ,Set/Clear Enable Bit 961" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRENB960  ,Set/Clear Enable Bit 960" "Disabled,Enabled"
else
hgroup.long 0x0178++0x03
hide.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30"
endif
tree.end
width 22.
tree "Set/Clear Pending Registers"
if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10)
hgroup.long 0x0200++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0"
newline
newline
newline
newline
newline
newline
newline
newline
newline
newline
else
group.long 0x0200++0x03
line.long 0x0 "GICD_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND31   ,Set/Clear Pending Bit 31" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND30   ,Set/Clear Pending Bit 30" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND29   ,Set/Clear Pending Bit 29" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND28   ,Set/Clear Pending Bit 28" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND27   ,Set/Clear Pending Bit 27" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND26   ,Set/Clear Pending Bit 26" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND25   ,Set/Clear Pending Bit 25" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND24   ,Set/Clear Pending Bit 24" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND23   ,Set/Clear Pending Bit 23" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND22   ,Set/Clear Pending Bit 22" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND21   ,Set/Clear Pending Bit 21" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND20   ,Set/Clear Pending Bit 20" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND19   ,Set/Clear Pending Bit 19" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND18   ,Set/Clear Pending Bit 18" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND17   ,Set/Clear Pending Bit 17" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND16   ,Set/Clear Pending Bit 16" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND15   ,Set/Clear Pending Bit 15" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND14   ,Set/Clear Pending Bit 14" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND13   ,Set/Clear Pending Bit 13" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND12   ,Set/Clear Pending Bit 12" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND11   ,Set/Clear Pending Bit 11" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND10   ,Set/Clear Pending Bit 10" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND9    ,Set/Clear Pending Bit 9" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND8    ,Set/Clear Pending Bit 8" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND7    ,Set/Clear Pending Bit 7" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND6    ,Set/Clear Pending Bit 6" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND5    ,Set/Clear Pending Bit 5" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND4    ,Set/Clear Pending Bit 4" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND3    ,Set/Clear Pending Bit 3" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND2    ,Set/Clear Pending Bit 2" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND1    ,Set/Clear Pending Bit 1" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND0    ,Set/Clear Pending Bit 0" "Not pending,Pending"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01)
group.long 0x0204++0x03
line.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND63   ,Set/Clear Pending Bit 63" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND62   ,Set/Clear Pending Bit 62" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND61   ,Set/Clear Pending Bit 61" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND60   ,Set/Clear Pending Bit 60" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND59   ,Set/Clear Pending Bit 59" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND58   ,Set/Clear Pending Bit 58" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND57   ,Set/Clear Pending Bit 57" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND56   ,Set/Clear Pending Bit 56" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND55   ,Set/Clear Pending Bit 55" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND54   ,Set/Clear Pending Bit 54" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND53   ,Set/Clear Pending Bit 53" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND52   ,Set/Clear Pending Bit 52" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND51   ,Set/Clear Pending Bit 51" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND50   ,Set/Clear Pending Bit 50" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND49   ,Set/Clear Pending Bit 49" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND48   ,Set/Clear Pending Bit 48" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND47   ,Set/Clear Pending Bit 47" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND46   ,Set/Clear Pending Bit 46" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND45   ,Set/Clear Pending Bit 45" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND44   ,Set/Clear Pending Bit 44" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND43   ,Set/Clear Pending Bit 43" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND42   ,Set/Clear Pending Bit 42" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND41   ,Set/Clear Pending Bit 41" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND40   ,Set/Clear Pending Bit 40" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND39   ,Set/Clear Pending Bit 39" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND38   ,Set/Clear Pending Bit 38" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND37   ,Set/Clear Pending Bit 37" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND36   ,Set/Clear Pending Bit 36" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND35   ,Set/Clear Pending Bit 35" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND34   ,Set/Clear Pending Bit 34" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND33   ,Set/Clear Pending Bit 33" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND32   ,Set/Clear Pending Bit 32" "Not pending,Pending"
else
hgroup.long 0x0204++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02)
group.long 0x0208++0x03
line.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND95   ,Set/Clear Pending Bit 95" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND94   ,Set/Clear Pending Bit 94" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND93   ,Set/Clear Pending Bit 93" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND92   ,Set/Clear Pending Bit 92" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND91   ,Set/Clear Pending Bit 91" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND90   ,Set/Clear Pending Bit 90" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND89   ,Set/Clear Pending Bit 89" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND88   ,Set/Clear Pending Bit 88" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND87   ,Set/Clear Pending Bit 87" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND86   ,Set/Clear Pending Bit 86" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND85   ,Set/Clear Pending Bit 85" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND84   ,Set/Clear Pending Bit 84" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND83   ,Set/Clear Pending Bit 83" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND82   ,Set/Clear Pending Bit 82" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND81   ,Set/Clear Pending Bit 81" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND80   ,Set/Clear Pending Bit 80" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND79   ,Set/Clear Pending Bit 79" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND78   ,Set/Clear Pending Bit 78" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND77   ,Set/Clear Pending Bit 77" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND76   ,Set/Clear Pending Bit 76" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND75   ,Set/Clear Pending Bit 75" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND74   ,Set/Clear Pending Bit 74" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND73   ,Set/Clear Pending Bit 73" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND72   ,Set/Clear Pending Bit 72" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND71   ,Set/Clear Pending Bit 71" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND70   ,Set/Clear Pending Bit 70" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND69   ,Set/Clear Pending Bit 69" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND68   ,Set/Clear Pending Bit 68" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND67   ,Set/Clear Pending Bit 67" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND66   ,Set/Clear Pending Bit 66" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND65   ,Set/Clear Pending Bit 65" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND64   ,Set/Clear Pending Bit 64" "Not pending,Pending"
else
hgroup.long 0x0208++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03)
group.long 0x020C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND127  ,Set/Clear Pending Bit 127" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND126  ,Set/Clear Pending Bit 126" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND125  ,Set/Clear Pending Bit 125" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND124  ,Set/Clear Pending Bit 124" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND123  ,Set/Clear Pending Bit 123" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND122  ,Set/Clear Pending Bit 122" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND121  ,Set/Clear Pending Bit 121" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND120  ,Set/Clear Pending Bit 120" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND119  ,Set/Clear Pending Bit 119" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND118  ,Set/Clear Pending Bit 118" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND117  ,Set/Clear Pending Bit 117" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND116  ,Set/Clear Pending Bit 116" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND115  ,Set/Clear Pending Bit 115" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND114  ,Set/Clear Pending Bit 114" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND113  ,Set/Clear Pending Bit 113" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND112  ,Set/Clear Pending Bit 112" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND111  ,Set/Clear Pending Bit 111" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND110  ,Set/Clear Pending Bit 110" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND109  ,Set/Clear Pending Bit 109" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND108  ,Set/Clear Pending Bit 108" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND107  ,Set/Clear Pending Bit 107" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND106  ,Set/Clear Pending Bit 106" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND105  ,Set/Clear Pending Bit 105" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND104  ,Set/Clear Pending Bit 104" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND103  ,Set/Clear Pending Bit 103" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND102  ,Set/Clear Pending Bit 102" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND101  ,Set/Clear Pending Bit 101" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND100  ,Set/Clear Pending Bit 100" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND99   ,Set/Clear Pending Bit 99" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND98   ,Set/Clear Pending Bit 98" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND97   ,Set/Clear Pending Bit 97" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND96   ,Set/Clear Pending Bit 96" "Not pending,Pending"
else
hgroup.long 0x020C++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04)
group.long 0x0210++0x03
line.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND159  ,Set/Clear Pending Bit 159" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND158  ,Set/Clear Pending Bit 158" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND157  ,Set/Clear Pending Bit 157" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND156  ,Set/Clear Pending Bit 156" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND155  ,Set/Clear Pending Bit 155" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND154  ,Set/Clear Pending Bit 154" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND153  ,Set/Clear Pending Bit 153" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND152  ,Set/Clear Pending Bit 152" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND151  ,Set/Clear Pending Bit 151" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND150  ,Set/Clear Pending Bit 150" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND149  ,Set/Clear Pending Bit 149" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND148  ,Set/Clear Pending Bit 148" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND147  ,Set/Clear Pending Bit 147" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND146  ,Set/Clear Pending Bit 146" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND145  ,Set/Clear Pending Bit 145" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND144  ,Set/Clear Pending Bit 144" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND143  ,Set/Clear Pending Bit 143" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND142  ,Set/Clear Pending Bit 142" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND141  ,Set/Clear Pending Bit 141" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND140  ,Set/Clear Pending Bit 140" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND139  ,Set/Clear Pending Bit 139" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND138  ,Set/Clear Pending Bit 138" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND137  ,Set/Clear Pending Bit 137" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND136  ,Set/Clear Pending Bit 136" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND135  ,Set/Clear Pending Bit 135" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND134  ,Set/Clear Pending Bit 134" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND133  ,Set/Clear Pending Bit 133" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND132  ,Set/Clear Pending Bit 132" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND131  ,Set/Clear Pending Bit 131" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND130  ,Set/Clear Pending Bit 130" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND129  ,Set/Clear Pending Bit 129" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND128  ,Set/Clear Pending Bit 128" "Not pending,Pending"
else
hgroup.long 0x0210++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05)
group.long 0x0214++0x03
line.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND191  ,Set/Clear Pending Bit 191" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND190  ,Set/Clear Pending Bit 190" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND189  ,Set/Clear Pending Bit 189" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND188  ,Set/Clear Pending Bit 188" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND187  ,Set/Clear Pending Bit 187" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND186  ,Set/Clear Pending Bit 186" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND185  ,Set/Clear Pending Bit 185" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND184  ,Set/Clear Pending Bit 184" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND183  ,Set/Clear Pending Bit 183" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND182  ,Set/Clear Pending Bit 182" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND181  ,Set/Clear Pending Bit 181" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND180  ,Set/Clear Pending Bit 180" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND179  ,Set/Clear Pending Bit 179" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND178  ,Set/Clear Pending Bit 178" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND177  ,Set/Clear Pending Bit 177" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND176  ,Set/Clear Pending Bit 176" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND175  ,Set/Clear Pending Bit 175" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND174  ,Set/Clear Pending Bit 174" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND173  ,Set/Clear Pending Bit 173" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND172  ,Set/Clear Pending Bit 172" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND171  ,Set/Clear Pending Bit 171" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND170  ,Set/Clear Pending Bit 170" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND169  ,Set/Clear Pending Bit 169" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND168  ,Set/Clear Pending Bit 168" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND167  ,Set/Clear Pending Bit 167" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND166  ,Set/Clear Pending Bit 166" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND165  ,Set/Clear Pending Bit 165" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND164  ,Set/Clear Pending Bit 164" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND163  ,Set/Clear Pending Bit 163" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND162  ,Set/Clear Pending Bit 162" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND161  ,Set/Clear Pending Bit 161" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND160  ,Set/Clear Pending Bit 160" "Not pending,Pending"
else
hgroup.long 0x0214++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06)
group.long 0x0218++0x03
line.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND223  ,Set/Clear Pending Bit 223" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND222  ,Set/Clear Pending Bit 222" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND221  ,Set/Clear Pending Bit 221" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND220  ,Set/Clear Pending Bit 220" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND219  ,Set/Clear Pending Bit 219" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND218  ,Set/Clear Pending Bit 218" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND217  ,Set/Clear Pending Bit 217" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND216  ,Set/Clear Pending Bit 216" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND215  ,Set/Clear Pending Bit 215" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND214  ,Set/Clear Pending Bit 214" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND213  ,Set/Clear Pending Bit 213" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND212  ,Set/Clear Pending Bit 212" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND211  ,Set/Clear Pending Bit 211" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND210  ,Set/Clear Pending Bit 210" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND209  ,Set/Clear Pending Bit 209" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND208  ,Set/Clear Pending Bit 208" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND207  ,Set/Clear Pending Bit 207" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND206  ,Set/Clear Pending Bit 206" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND205  ,Set/Clear Pending Bit 205" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND204  ,Set/Clear Pending Bit 204" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND203  ,Set/Clear Pending Bit 203" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND202  ,Set/Clear Pending Bit 202" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND201  ,Set/Clear Pending Bit 201" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND200  ,Set/Clear Pending Bit 200" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND199  ,Set/Clear Pending Bit 199" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND198  ,Set/Clear Pending Bit 198" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND197  ,Set/Clear Pending Bit 197" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND196  ,Set/Clear Pending Bit 196" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND195  ,Set/Clear Pending Bit 195" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND194  ,Set/Clear Pending Bit 194" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND193  ,Set/Clear Pending Bit 193" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND192  ,Set/Clear Pending Bit 192" "Not pending,Pending"
else
hgroup.long 0x0218++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07)
group.long 0x021C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND255  ,Set/Clear Pending Bit 255" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND254  ,Set/Clear Pending Bit 254" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND253  ,Set/Clear Pending Bit 253" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND252  ,Set/Clear Pending Bit 252" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND251  ,Set/Clear Pending Bit 251" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND250  ,Set/Clear Pending Bit 250" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND249  ,Set/Clear Pending Bit 249" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND248  ,Set/Clear Pending Bit 248" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND247  ,Set/Clear Pending Bit 247" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND246  ,Set/Clear Pending Bit 246" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND245  ,Set/Clear Pending Bit 245" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND244  ,Set/Clear Pending Bit 244" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND243  ,Set/Clear Pending Bit 243" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND242  ,Set/Clear Pending Bit 242" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND241  ,Set/Clear Pending Bit 241" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND240  ,Set/Clear Pending Bit 240" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND239  ,Set/Clear Pending Bit 239" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND238  ,Set/Clear Pending Bit 238" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND237  ,Set/Clear Pending Bit 237" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND236  ,Set/Clear Pending Bit 236" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND235  ,Set/Clear Pending Bit 235" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND234  ,Set/Clear Pending Bit 234" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND233  ,Set/Clear Pending Bit 233" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND232  ,Set/Clear Pending Bit 232" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND231  ,Set/Clear Pending Bit 231" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND230  ,Set/Clear Pending Bit 230" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND229  ,Set/Clear Pending Bit 229" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND228  ,Set/Clear Pending Bit 228" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND227  ,Set/Clear Pending Bit 227" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND226  ,Set/Clear Pending Bit 226" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND225  ,Set/Clear Pending Bit 225" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND224  ,Set/Clear Pending Bit 224" "Not pending,Pending"
else
hgroup.long 0x021C++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08)
group.long 0x0220++0x03
line.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND287  ,Set/Clear Pending Bit 287" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND286  ,Set/Clear Pending Bit 286" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND285  ,Set/Clear Pending Bit 285" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND284  ,Set/Clear Pending Bit 284" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND283  ,Set/Clear Pending Bit 283" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND282  ,Set/Clear Pending Bit 282" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND281  ,Set/Clear Pending Bit 281" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND280  ,Set/Clear Pending Bit 280" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND279  ,Set/Clear Pending Bit 279" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND278  ,Set/Clear Pending Bit 278" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND277  ,Set/Clear Pending Bit 277" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND276  ,Set/Clear Pending Bit 276" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND275  ,Set/Clear Pending Bit 275" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND274  ,Set/Clear Pending Bit 274" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND273  ,Set/Clear Pending Bit 273" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND272  ,Set/Clear Pending Bit 272" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND271  ,Set/Clear Pending Bit 271" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND270  ,Set/Clear Pending Bit 270" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND269  ,Set/Clear Pending Bit 269" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND268  ,Set/Clear Pending Bit 268" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND267  ,Set/Clear Pending Bit 267" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND266  ,Set/Clear Pending Bit 266" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND265  ,Set/Clear Pending Bit 265" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND264  ,Set/Clear Pending Bit 264" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND263  ,Set/Clear Pending Bit 263" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND262  ,Set/Clear Pending Bit 262" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND261  ,Set/Clear Pending Bit 261" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND260  ,Set/Clear Pending Bit 260" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND259  ,Set/Clear Pending Bit 259" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND258  ,Set/Clear Pending Bit 258" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND257  ,Set/Clear Pending Bit 257" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND256  ,Set/Clear Pending Bit 256" "Not pending,Pending"
else
hgroup.long 0x0220++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09)
group.long 0x0224++0x03
line.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND319  ,Set/Clear Pending Bit 319" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND318  ,Set/Clear Pending Bit 318" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND317  ,Set/Clear Pending Bit 317" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND316  ,Set/Clear Pending Bit 316" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND315  ,Set/Clear Pending Bit 315" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND314  ,Set/Clear Pending Bit 314" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND313  ,Set/Clear Pending Bit 313" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND312  ,Set/Clear Pending Bit 312" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND311  ,Set/Clear Pending Bit 311" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND310  ,Set/Clear Pending Bit 310" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND309  ,Set/Clear Pending Bit 309" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND308  ,Set/Clear Pending Bit 308" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND307  ,Set/Clear Pending Bit 307" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND306  ,Set/Clear Pending Bit 306" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND305  ,Set/Clear Pending Bit 305" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND304  ,Set/Clear Pending Bit 304" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND303  ,Set/Clear Pending Bit 303" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND302  ,Set/Clear Pending Bit 302" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND301  ,Set/Clear Pending Bit 301" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND300  ,Set/Clear Pending Bit 300" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND299  ,Set/Clear Pending Bit 299" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND298  ,Set/Clear Pending Bit 298" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND297  ,Set/Clear Pending Bit 297" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND296  ,Set/Clear Pending Bit 296" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND295  ,Set/Clear Pending Bit 295" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND294  ,Set/Clear Pending Bit 294" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND293  ,Set/Clear Pending Bit 293" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND292  ,Set/Clear Pending Bit 292" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND291  ,Set/Clear Pending Bit 291" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND290  ,Set/Clear Pending Bit 290" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND289  ,Set/Clear Pending Bit 289" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND288  ,Set/Clear Pending Bit 288" "Not pending,Pending"
else
hgroup.long 0x0224++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A)
group.long 0x0228++0x03
line.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND351  ,Set/Clear Pending Bit 351" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND350  ,Set/Clear Pending Bit 350" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND349  ,Set/Clear Pending Bit 349" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND348  ,Set/Clear Pending Bit 348" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND347  ,Set/Clear Pending Bit 347" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND346  ,Set/Clear Pending Bit 346" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND345  ,Set/Clear Pending Bit 345" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND344  ,Set/Clear Pending Bit 344" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND343  ,Set/Clear Pending Bit 343" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND342  ,Set/Clear Pending Bit 342" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND341  ,Set/Clear Pending Bit 341" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND340  ,Set/Clear Pending Bit 340" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND339  ,Set/Clear Pending Bit 339" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND338  ,Set/Clear Pending Bit 338" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND337  ,Set/Clear Pending Bit 337" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND336  ,Set/Clear Pending Bit 336" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND335  ,Set/Clear Pending Bit 335" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND334  ,Set/Clear Pending Bit 334" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND333  ,Set/Clear Pending Bit 333" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND332  ,Set/Clear Pending Bit 332" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND331  ,Set/Clear Pending Bit 331" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND330  ,Set/Clear Pending Bit 330" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND329  ,Set/Clear Pending Bit 329" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND328  ,Set/Clear Pending Bit 328" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND327  ,Set/Clear Pending Bit 327" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND326  ,Set/Clear Pending Bit 326" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND325  ,Set/Clear Pending Bit 325" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND324  ,Set/Clear Pending Bit 324" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND323  ,Set/Clear Pending Bit 323" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND322  ,Set/Clear Pending Bit 322" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND321  ,Set/Clear Pending Bit 321" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND320  ,Set/Clear Pending Bit 320" "Not pending,Pending"
else
hgroup.long 0x0228++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B)
group.long 0x022C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND383  ,Set/Clear Pending Bit 383" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND382  ,Set/Clear Pending Bit 382" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND381  ,Set/Clear Pending Bit 381" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND380  ,Set/Clear Pending Bit 380" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND379  ,Set/Clear Pending Bit 379" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND378  ,Set/Clear Pending Bit 378" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND377  ,Set/Clear Pending Bit 377" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND376  ,Set/Clear Pending Bit 376" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND375  ,Set/Clear Pending Bit 375" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND374  ,Set/Clear Pending Bit 374" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND373  ,Set/Clear Pending Bit 373" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND372  ,Set/Clear Pending Bit 372" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND371  ,Set/Clear Pending Bit 371" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND370  ,Set/Clear Pending Bit 370" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND369  ,Set/Clear Pending Bit 369" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND368  ,Set/Clear Pending Bit 368" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND367  ,Set/Clear Pending Bit 367" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND366  ,Set/Clear Pending Bit 366" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND365  ,Set/Clear Pending Bit 365" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND364  ,Set/Clear Pending Bit 364" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND363  ,Set/Clear Pending Bit 363" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND362  ,Set/Clear Pending Bit 362" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND361  ,Set/Clear Pending Bit 361" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND360  ,Set/Clear Pending Bit 360" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND359  ,Set/Clear Pending Bit 359" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND358  ,Set/Clear Pending Bit 358" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND357  ,Set/Clear Pending Bit 357" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND356  ,Set/Clear Pending Bit 356" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND355  ,Set/Clear Pending Bit 355" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND354  ,Set/Clear Pending Bit 354" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND353  ,Set/Clear Pending Bit 353" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND352  ,Set/Clear Pending Bit 352" "Not pending,Pending"
else
hgroup.long 0x022C++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C)
group.long 0x0230++0x03
line.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND415  ,Set/Clear Pending Bit 415" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND414  ,Set/Clear Pending Bit 414" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND413  ,Set/Clear Pending Bit 413" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND412  ,Set/Clear Pending Bit 412" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND411  ,Set/Clear Pending Bit 411" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND410  ,Set/Clear Pending Bit 410" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND409  ,Set/Clear Pending Bit 409" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND408  ,Set/Clear Pending Bit 408" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND407  ,Set/Clear Pending Bit 407" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND406  ,Set/Clear Pending Bit 406" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND405  ,Set/Clear Pending Bit 405" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND404  ,Set/Clear Pending Bit 404" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND403  ,Set/Clear Pending Bit 403" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND402  ,Set/Clear Pending Bit 402" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND401  ,Set/Clear Pending Bit 401" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND400  ,Set/Clear Pending Bit 400" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND399  ,Set/Clear Pending Bit 399" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND398  ,Set/Clear Pending Bit 398" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND397  ,Set/Clear Pending Bit 397" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND396  ,Set/Clear Pending Bit 396" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND395  ,Set/Clear Pending Bit 395" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND394  ,Set/Clear Pending Bit 394" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND393  ,Set/Clear Pending Bit 393" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND392  ,Set/Clear Pending Bit 392" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND391  ,Set/Clear Pending Bit 391" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND390  ,Set/Clear Pending Bit 390" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND389  ,Set/Clear Pending Bit 389" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND388  ,Set/Clear Pending Bit 388" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND387  ,Set/Clear Pending Bit 387" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND386  ,Set/Clear Pending Bit 386" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND385  ,Set/Clear Pending Bit 385" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND384  ,Set/Clear Pending Bit 384" "Not pending,Pending"
else
hgroup.long 0x0230++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D)
group.long 0x0234++0x03
line.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND447  ,Set/Clear Pending Bit 447" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND446  ,Set/Clear Pending Bit 446" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND445  ,Set/Clear Pending Bit 445" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND444  ,Set/Clear Pending Bit 444" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND443  ,Set/Clear Pending Bit 443" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND442  ,Set/Clear Pending Bit 442" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND441  ,Set/Clear Pending Bit 441" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND440  ,Set/Clear Pending Bit 440" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND439  ,Set/Clear Pending Bit 439" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND438  ,Set/Clear Pending Bit 438" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND437  ,Set/Clear Pending Bit 437" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND436  ,Set/Clear Pending Bit 436" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND435  ,Set/Clear Pending Bit 435" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND434  ,Set/Clear Pending Bit 434" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND433  ,Set/Clear Pending Bit 433" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND432  ,Set/Clear Pending Bit 432" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND431  ,Set/Clear Pending Bit 431" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND430  ,Set/Clear Pending Bit 430" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND429  ,Set/Clear Pending Bit 429" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND428  ,Set/Clear Pending Bit 428" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND427  ,Set/Clear Pending Bit 427" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND426  ,Set/Clear Pending Bit 426" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND425  ,Set/Clear Pending Bit 425" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND424  ,Set/Clear Pending Bit 424" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND423  ,Set/Clear Pending Bit 423" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND422  ,Set/Clear Pending Bit 422" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND421  ,Set/Clear Pending Bit 421" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND420  ,Set/Clear Pending Bit 420" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND419  ,Set/Clear Pending Bit 419" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND418  ,Set/Clear Pending Bit 418" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND417  ,Set/Clear Pending Bit 417" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND416  ,Set/Clear Pending Bit 416" "Not pending,Pending"
else
hgroup.long 0x0234++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E)
group.long 0x0238++0x03
line.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND479  ,Set/Clear Pending Bit 479" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND478  ,Set/Clear Pending Bit 478" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND477  ,Set/Clear Pending Bit 477" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND476  ,Set/Clear Pending Bit 476" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND475  ,Set/Clear Pending Bit 475" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND474  ,Set/Clear Pending Bit 474" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND473  ,Set/Clear Pending Bit 473" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND472  ,Set/Clear Pending Bit 472" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND471  ,Set/Clear Pending Bit 471" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND470  ,Set/Clear Pending Bit 470" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND469  ,Set/Clear Pending Bit 469" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND468  ,Set/Clear Pending Bit 468" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND467  ,Set/Clear Pending Bit 467" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND466  ,Set/Clear Pending Bit 466" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND465  ,Set/Clear Pending Bit 465" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND464  ,Set/Clear Pending Bit 464" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND463  ,Set/Clear Pending Bit 463" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND462  ,Set/Clear Pending Bit 462" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND461  ,Set/Clear Pending Bit 461" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND460  ,Set/Clear Pending Bit 460" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND459  ,Set/Clear Pending Bit 459" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND458  ,Set/Clear Pending Bit 458" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND457  ,Set/Clear Pending Bit 457" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND456  ,Set/Clear Pending Bit 456" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND455  ,Set/Clear Pending Bit 455" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND454  ,Set/Clear Pending Bit 454" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND453  ,Set/Clear Pending Bit 453" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND452  ,Set/Clear Pending Bit 452" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND451  ,Set/Clear Pending Bit 451" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND450  ,Set/Clear Pending Bit 450" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND449  ,Set/Clear Pending Bit 449" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND448  ,Set/Clear Pending Bit 448" "Not pending,Pending"
else
hgroup.long 0x0238++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F)
group.long 0x023C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND511  ,Set/Clear Pending Bit 511" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND510  ,Set/Clear Pending Bit 510" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND509  ,Set/Clear Pending Bit 509" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND508  ,Set/Clear Pending Bit 508" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND507  ,Set/Clear Pending Bit 507" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND506  ,Set/Clear Pending Bit 506" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND505  ,Set/Clear Pending Bit 505" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND504  ,Set/Clear Pending Bit 504" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND503  ,Set/Clear Pending Bit 503" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND502  ,Set/Clear Pending Bit 502" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND501  ,Set/Clear Pending Bit 501" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND500  ,Set/Clear Pending Bit 500" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND499  ,Set/Clear Pending Bit 499" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND498  ,Set/Clear Pending Bit 498" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND497  ,Set/Clear Pending Bit 497" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND496  ,Set/Clear Pending Bit 496" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND495  ,Set/Clear Pending Bit 495" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND494  ,Set/Clear Pending Bit 494" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND493  ,Set/Clear Pending Bit 493" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND492  ,Set/Clear Pending Bit 492" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND491  ,Set/Clear Pending Bit 491" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND490  ,Set/Clear Pending Bit 490" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND489  ,Set/Clear Pending Bit 489" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND488  ,Set/Clear Pending Bit 488" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND487  ,Set/Clear Pending Bit 487" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND486  ,Set/Clear Pending Bit 486" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND485  ,Set/Clear Pending Bit 485" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND484  ,Set/Clear Pending Bit 484" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND483  ,Set/Clear Pending Bit 483" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND482  ,Set/Clear Pending Bit 482" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND481  ,Set/Clear Pending Bit 481" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND480  ,Set/Clear Pending Bit 480" "Not pending,Pending"
else
hgroup.long 0x023C++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)
group.long 0x0240++0x03
line.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND543  ,Set/Clear Pending Bit 543" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND542  ,Set/Clear Pending Bit 542" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND541  ,Set/Clear Pending Bit 541" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND540  ,Set/Clear Pending Bit 540" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND539  ,Set/Clear Pending Bit 539" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND538  ,Set/Clear Pending Bit 538" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND537  ,Set/Clear Pending Bit 537" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND536  ,Set/Clear Pending Bit 536" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND535  ,Set/Clear Pending Bit 535" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND534  ,Set/Clear Pending Bit 534" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND533  ,Set/Clear Pending Bit 533" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND532  ,Set/Clear Pending Bit 532" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND531  ,Set/Clear Pending Bit 531" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND530  ,Set/Clear Pending Bit 530" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND529  ,Set/Clear Pending Bit 529" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND528  ,Set/Clear Pending Bit 528" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND527  ,Set/Clear Pending Bit 527" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND526  ,Set/Clear Pending Bit 526" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND525  ,Set/Clear Pending Bit 525" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND524  ,Set/Clear Pending Bit 524" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND523  ,Set/Clear Pending Bit 523" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND522  ,Set/Clear Pending Bit 522" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND521  ,Set/Clear Pending Bit 521" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND520  ,Set/Clear Pending Bit 520" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND519  ,Set/Clear Pending Bit 519" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND518  ,Set/Clear Pending Bit 518" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND517  ,Set/Clear Pending Bit 517" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND516  ,Set/Clear Pending Bit 516" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND515  ,Set/Clear Pending Bit 515" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND514  ,Set/Clear Pending Bit 514" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND513  ,Set/Clear Pending Bit 513" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND512  ,Set/Clear Pending Bit 512" "Not pending,Pending"
else
hgroup.long 0x0240++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)
group.long 0x0244++0x03
line.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND575  ,Set/Clear Pending Bit 575" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND574  ,Set/Clear Pending Bit 574" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND573  ,Set/Clear Pending Bit 573" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND572  ,Set/Clear Pending Bit 572" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND571  ,Set/Clear Pending Bit 571" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND570  ,Set/Clear Pending Bit 570" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND569  ,Set/Clear Pending Bit 569" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND568  ,Set/Clear Pending Bit 568" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND567  ,Set/Clear Pending Bit 567" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND566  ,Set/Clear Pending Bit 566" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND565  ,Set/Clear Pending Bit 565" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND564  ,Set/Clear Pending Bit 564" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND563  ,Set/Clear Pending Bit 563" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND562  ,Set/Clear Pending Bit 562" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND561  ,Set/Clear Pending Bit 561" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND560  ,Set/Clear Pending Bit 560" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND559  ,Set/Clear Pending Bit 559" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND558  ,Set/Clear Pending Bit 558" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND557  ,Set/Clear Pending Bit 557" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND556  ,Set/Clear Pending Bit 556" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND555  ,Set/Clear Pending Bit 555" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND554  ,Set/Clear Pending Bit 554" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND553  ,Set/Clear Pending Bit 553" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND552  ,Set/Clear Pending Bit 552" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND551  ,Set/Clear Pending Bit 551" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND550  ,Set/Clear Pending Bit 550" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND549  ,Set/Clear Pending Bit 549" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND548  ,Set/Clear Pending Bit 548" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND547  ,Set/Clear Pending Bit 547" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND546  ,Set/Clear Pending Bit 546" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND545  ,Set/Clear Pending Bit 545" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND544  ,Set/Clear Pending Bit 544" "Not pending,Pending"
else
hgroup.long 0x0244++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)
group.long 0x0248++0x03
line.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND607  ,Set/Clear Pending Bit 607" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND606  ,Set/Clear Pending Bit 606" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND605  ,Set/Clear Pending Bit 605" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND604  ,Set/Clear Pending Bit 604" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND603  ,Set/Clear Pending Bit 603" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND602  ,Set/Clear Pending Bit 602" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND601  ,Set/Clear Pending Bit 601" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND600  ,Set/Clear Pending Bit 600" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND599  ,Set/Clear Pending Bit 599" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND598  ,Set/Clear Pending Bit 598" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND597  ,Set/Clear Pending Bit 597" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND596  ,Set/Clear Pending Bit 596" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND595  ,Set/Clear Pending Bit 595" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND594  ,Set/Clear Pending Bit 594" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND593  ,Set/Clear Pending Bit 593" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND592  ,Set/Clear Pending Bit 592" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND591  ,Set/Clear Pending Bit 591" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND590  ,Set/Clear Pending Bit 590" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND589  ,Set/Clear Pending Bit 589" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND588  ,Set/Clear Pending Bit 588" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND587  ,Set/Clear Pending Bit 587" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND586  ,Set/Clear Pending Bit 586" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND585  ,Set/Clear Pending Bit 585" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND584  ,Set/Clear Pending Bit 584" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND583  ,Set/Clear Pending Bit 583" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND582  ,Set/Clear Pending Bit 582" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND581  ,Set/Clear Pending Bit 581" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND580  ,Set/Clear Pending Bit 580" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND579  ,Set/Clear Pending Bit 579" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND578  ,Set/Clear Pending Bit 578" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND577  ,Set/Clear Pending Bit 577" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND576  ,Set/Clear Pending Bit 576" "Not pending,Pending"
else
hgroup.long 0x0248++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)
group.long 0x024C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND639  ,Set/Clear Pending Bit 639" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND638  ,Set/Clear Pending Bit 638" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND637  ,Set/Clear Pending Bit 637" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND636  ,Set/Clear Pending Bit 636" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND635  ,Set/Clear Pending Bit 635" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND634  ,Set/Clear Pending Bit 634" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND633  ,Set/Clear Pending Bit 633" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND632  ,Set/Clear Pending Bit 632" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND631  ,Set/Clear Pending Bit 631" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND630  ,Set/Clear Pending Bit 630" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND629  ,Set/Clear Pending Bit 629" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND628  ,Set/Clear Pending Bit 628" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND627  ,Set/Clear Pending Bit 627" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND626  ,Set/Clear Pending Bit 626" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND625  ,Set/Clear Pending Bit 625" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND624  ,Set/Clear Pending Bit 624" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND623  ,Set/Clear Pending Bit 623" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND622  ,Set/Clear Pending Bit 622" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND621  ,Set/Clear Pending Bit 621" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND620  ,Set/Clear Pending Bit 620" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND619  ,Set/Clear Pending Bit 619" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND618  ,Set/Clear Pending Bit 618" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND617  ,Set/Clear Pending Bit 617" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND616  ,Set/Clear Pending Bit 616" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND615  ,Set/Clear Pending Bit 615" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND614  ,Set/Clear Pending Bit 614" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND613  ,Set/Clear Pending Bit 613" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND612  ,Set/Clear Pending Bit 612" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND611  ,Set/Clear Pending Bit 611" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND610  ,Set/Clear Pending Bit 610" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND609  ,Set/Clear Pending Bit 609" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND608  ,Set/Clear Pending Bit 608" "Not pending,Pending"
else
hgroup.long 0x024C++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)
group.long 0x0250++0x03
line.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND671  ,Set/Clear Pending Bit 671" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND670  ,Set/Clear Pending Bit 670" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND669  ,Set/Clear Pending Bit 669" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND668  ,Set/Clear Pending Bit 668" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND667  ,Set/Clear Pending Bit 667" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND666  ,Set/Clear Pending Bit 666" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND665  ,Set/Clear Pending Bit 665" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND664  ,Set/Clear Pending Bit 664" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND663  ,Set/Clear Pending Bit 663" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND662  ,Set/Clear Pending Bit 662" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND661  ,Set/Clear Pending Bit 661" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND660  ,Set/Clear Pending Bit 660" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND659  ,Set/Clear Pending Bit 659" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND658  ,Set/Clear Pending Bit 658" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND657  ,Set/Clear Pending Bit 657" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND656  ,Set/Clear Pending Bit 656" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND655  ,Set/Clear Pending Bit 655" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND654  ,Set/Clear Pending Bit 654" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND653  ,Set/Clear Pending Bit 653" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND652  ,Set/Clear Pending Bit 652" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND651  ,Set/Clear Pending Bit 651" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND650  ,Set/Clear Pending Bit 650" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND649  ,Set/Clear Pending Bit 649" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND648  ,Set/Clear Pending Bit 648" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND647  ,Set/Clear Pending Bit 647" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND646  ,Set/Clear Pending Bit 646" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND645  ,Set/Clear Pending Bit 645" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND644  ,Set/Clear Pending Bit 644" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND643  ,Set/Clear Pending Bit 643" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND642  ,Set/Clear Pending Bit 642" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND641  ,Set/Clear Pending Bit 641" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND640  ,Set/Clear Pending Bit 640" "Not pending,Pending"
else
hgroup.long 0x0250++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)
group.long 0x0254++0x03
line.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND703  ,Set/Clear Pending Bit 703" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND702  ,Set/Clear Pending Bit 702" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND701  ,Set/Clear Pending Bit 701" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND700  ,Set/Clear Pending Bit 700" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND699  ,Set/Clear Pending Bit 699" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND698  ,Set/Clear Pending Bit 698" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND697  ,Set/Clear Pending Bit 697" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND696  ,Set/Clear Pending Bit 696" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND695  ,Set/Clear Pending Bit 695" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND694  ,Set/Clear Pending Bit 694" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND693  ,Set/Clear Pending Bit 693" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND692  ,Set/Clear Pending Bit 692" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND691  ,Set/Clear Pending Bit 691" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND690  ,Set/Clear Pending Bit 690" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND689  ,Set/Clear Pending Bit 689" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND688  ,Set/Clear Pending Bit 688" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND687  ,Set/Clear Pending Bit 687" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND686  ,Set/Clear Pending Bit 686" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND685  ,Set/Clear Pending Bit 685" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND684  ,Set/Clear Pending Bit 684" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND683  ,Set/Clear Pending Bit 683" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND682  ,Set/Clear Pending Bit 682" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND681  ,Set/Clear Pending Bit 681" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND680  ,Set/Clear Pending Bit 680" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND679  ,Set/Clear Pending Bit 679" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND678  ,Set/Clear Pending Bit 678" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND677  ,Set/Clear Pending Bit 677" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND676  ,Set/Clear Pending Bit 676" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND675  ,Set/Clear Pending Bit 675" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND674  ,Set/Clear Pending Bit 674" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND673  ,Set/Clear Pending Bit 673" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND672  ,Set/Clear Pending Bit 672" "Not pending,Pending"
else
hgroup.long 0x0254++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)
group.long 0x0258++0x03
line.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND735  ,Set/Clear Pending Bit 735" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND734  ,Set/Clear Pending Bit 734" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND733  ,Set/Clear Pending Bit 733" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND732  ,Set/Clear Pending Bit 732" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND731  ,Set/Clear Pending Bit 731" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND730  ,Set/Clear Pending Bit 730" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND729  ,Set/Clear Pending Bit 729" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND728  ,Set/Clear Pending Bit 728" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND727  ,Set/Clear Pending Bit 727" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND726  ,Set/Clear Pending Bit 726" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND725  ,Set/Clear Pending Bit 725" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND724  ,Set/Clear Pending Bit 724" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND723  ,Set/Clear Pending Bit 723" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND722  ,Set/Clear Pending Bit 722" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND721  ,Set/Clear Pending Bit 721" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND720  ,Set/Clear Pending Bit 720" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND719  ,Set/Clear Pending Bit 719" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND718  ,Set/Clear Pending Bit 718" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND717  ,Set/Clear Pending Bit 717" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND716  ,Set/Clear Pending Bit 716" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND715  ,Set/Clear Pending Bit 715" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND714  ,Set/Clear Pending Bit 714" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND713  ,Set/Clear Pending Bit 713" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND712  ,Set/Clear Pending Bit 712" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND711  ,Set/Clear Pending Bit 711" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND710  ,Set/Clear Pending Bit 710" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND709  ,Set/Clear Pending Bit 709" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND708  ,Set/Clear Pending Bit 708" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND707  ,Set/Clear Pending Bit 707" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND706  ,Set/Clear Pending Bit 706" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND705  ,Set/Clear Pending Bit 705" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND704  ,Set/Clear Pending Bit 704" "Not pending,Pending"
else
hgroup.long 0x0258++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)
group.long 0x025C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND767  ,Set/Clear Pending Bit 767" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND766  ,Set/Clear Pending Bit 766" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND765  ,Set/Clear Pending Bit 765" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND764  ,Set/Clear Pending Bit 764" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND763  ,Set/Clear Pending Bit 763" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND762  ,Set/Clear Pending Bit 762" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND761  ,Set/Clear Pending Bit 761" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND760  ,Set/Clear Pending Bit 760" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND759  ,Set/Clear Pending Bit 759" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND758  ,Set/Clear Pending Bit 758" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND757  ,Set/Clear Pending Bit 757" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND756  ,Set/Clear Pending Bit 756" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND755  ,Set/Clear Pending Bit 755" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND754  ,Set/Clear Pending Bit 754" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND753  ,Set/Clear Pending Bit 753" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND752  ,Set/Clear Pending Bit 752" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND751  ,Set/Clear Pending Bit 751" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND750  ,Set/Clear Pending Bit 750" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND749  ,Set/Clear Pending Bit 749" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND748  ,Set/Clear Pending Bit 748" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND747  ,Set/Clear Pending Bit 747" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND746  ,Set/Clear Pending Bit 746" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND745  ,Set/Clear Pending Bit 745" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND744  ,Set/Clear Pending Bit 744" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND743  ,Set/Clear Pending Bit 743" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND742  ,Set/Clear Pending Bit 742" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND741  ,Set/Clear Pending Bit 741" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND740  ,Set/Clear Pending Bit 740" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND739  ,Set/Clear Pending Bit 739" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND738  ,Set/Clear Pending Bit 738" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND737  ,Set/Clear Pending Bit 737" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND736  ,Set/Clear Pending Bit 736" "Not pending,Pending"
else
hgroup.long 0x025C++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)
group.long 0x0260++0x03
line.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND799  ,Set/Clear Pending Bit 799" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND798  ,Set/Clear Pending Bit 798" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND797  ,Set/Clear Pending Bit 797" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND796  ,Set/Clear Pending Bit 796" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND795  ,Set/Clear Pending Bit 795" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND794  ,Set/Clear Pending Bit 794" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND793  ,Set/Clear Pending Bit 793" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND792  ,Set/Clear Pending Bit 792" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND791  ,Set/Clear Pending Bit 791" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND790  ,Set/Clear Pending Bit 790" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND789  ,Set/Clear Pending Bit 789" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND788  ,Set/Clear Pending Bit 788" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND787  ,Set/Clear Pending Bit 787" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND786  ,Set/Clear Pending Bit 786" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND785  ,Set/Clear Pending Bit 785" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND784  ,Set/Clear Pending Bit 784" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND783  ,Set/Clear Pending Bit 783" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND782  ,Set/Clear Pending Bit 782" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND781  ,Set/Clear Pending Bit 781" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND780  ,Set/Clear Pending Bit 780" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND779  ,Set/Clear Pending Bit 779" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND778  ,Set/Clear Pending Bit 778" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND777  ,Set/Clear Pending Bit 777" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND776  ,Set/Clear Pending Bit 776" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND775  ,Set/Clear Pending Bit 775" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND774  ,Set/Clear Pending Bit 774" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND773  ,Set/Clear Pending Bit 773" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND772  ,Set/Clear Pending Bit 772" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND771  ,Set/Clear Pending Bit 771" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND770  ,Set/Clear Pending Bit 770" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND769  ,Set/Clear Pending Bit 769" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND768  ,Set/Clear Pending Bit 768" "Not pending,Pending"
else
hgroup.long 0x0260++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)
group.long 0x0264++0x03
line.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND831  ,Set/Clear Pending Bit 831" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND830  ,Set/Clear Pending Bit 830" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND829  ,Set/Clear Pending Bit 829" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND828  ,Set/Clear Pending Bit 828" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND827  ,Set/Clear Pending Bit 827" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND826  ,Set/Clear Pending Bit 826" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND825  ,Set/Clear Pending Bit 825" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND824  ,Set/Clear Pending Bit 824" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND823  ,Set/Clear Pending Bit 823" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND822  ,Set/Clear Pending Bit 822" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND821  ,Set/Clear Pending Bit 821" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND820  ,Set/Clear Pending Bit 820" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND819  ,Set/Clear Pending Bit 819" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND818  ,Set/Clear Pending Bit 818" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND817  ,Set/Clear Pending Bit 817" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND816  ,Set/Clear Pending Bit 816" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND815  ,Set/Clear Pending Bit 815" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND814  ,Set/Clear Pending Bit 814" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND813  ,Set/Clear Pending Bit 813" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND812  ,Set/Clear Pending Bit 812" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND811  ,Set/Clear Pending Bit 811" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND810  ,Set/Clear Pending Bit 810" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND809  ,Set/Clear Pending Bit 809" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND808  ,Set/Clear Pending Bit 808" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND807  ,Set/Clear Pending Bit 807" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND806  ,Set/Clear Pending Bit 806" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND805  ,Set/Clear Pending Bit 805" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND804  ,Set/Clear Pending Bit 804" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND803  ,Set/Clear Pending Bit 803" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND802  ,Set/Clear Pending Bit 802" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND801  ,Set/Clear Pending Bit 801" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND800  ,Set/Clear Pending Bit 800" "Not pending,Pending"
else
hgroup.long 0x0264++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A)
group.long 0x0268++0x03
line.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND863  ,Set/Clear Pending Bit 863" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND862  ,Set/Clear Pending Bit 862" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND861  ,Set/Clear Pending Bit 861" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND860  ,Set/Clear Pending Bit 860" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND859  ,Set/Clear Pending Bit 859" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND858  ,Set/Clear Pending Bit 858" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND857  ,Set/Clear Pending Bit 857" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND856  ,Set/Clear Pending Bit 856" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND855  ,Set/Clear Pending Bit 855" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND854  ,Set/Clear Pending Bit 854" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND853  ,Set/Clear Pending Bit 853" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND852  ,Set/Clear Pending Bit 852" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND851  ,Set/Clear Pending Bit 851" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND850  ,Set/Clear Pending Bit 850" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND849  ,Set/Clear Pending Bit 849" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND848  ,Set/Clear Pending Bit 848" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND847  ,Set/Clear Pending Bit 847" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND846  ,Set/Clear Pending Bit 846" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND845  ,Set/Clear Pending Bit 845" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND844  ,Set/Clear Pending Bit 844" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND843  ,Set/Clear Pending Bit 843" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND842  ,Set/Clear Pending Bit 842" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND841  ,Set/Clear Pending Bit 841" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND840  ,Set/Clear Pending Bit 840" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND839  ,Set/Clear Pending Bit 839" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND838  ,Set/Clear Pending Bit 838" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND837  ,Set/Clear Pending Bit 837" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND836  ,Set/Clear Pending Bit 836" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND835  ,Set/Clear Pending Bit 835" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND834  ,Set/Clear Pending Bit 834" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND833  ,Set/Clear Pending Bit 833" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND832  ,Set/Clear Pending Bit 832" "Not pending,Pending"
else
hgroup.long 0x0268++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)
group.long 0x026C++0x03
line.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND895  ,Set/Clear Pending Bit 895" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND894  ,Set/Clear Pending Bit 894" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND893  ,Set/Clear Pending Bit 893" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND892  ,Set/Clear Pending Bit 892" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND891  ,Set/Clear Pending Bit 891" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND890  ,Set/Clear Pending Bit 890" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND889  ,Set/Clear Pending Bit 889" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND888  ,Set/Clear Pending Bit 888" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND887  ,Set/Clear Pending Bit 887" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND886  ,Set/Clear Pending Bit 886" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND885  ,Set/Clear Pending Bit 885" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND884  ,Set/Clear Pending Bit 884" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND883  ,Set/Clear Pending Bit 883" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND882  ,Set/Clear Pending Bit 882" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND881  ,Set/Clear Pending Bit 881" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND880  ,Set/Clear Pending Bit 880" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND879  ,Set/Clear Pending Bit 879" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND878  ,Set/Clear Pending Bit 878" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND877  ,Set/Clear Pending Bit 877" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND876  ,Set/Clear Pending Bit 876" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND875  ,Set/Clear Pending Bit 875" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND874  ,Set/Clear Pending Bit 874" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND873  ,Set/Clear Pending Bit 873" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND872  ,Set/Clear Pending Bit 872" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND871  ,Set/Clear Pending Bit 871" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND870  ,Set/Clear Pending Bit 870" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND869  ,Set/Clear Pending Bit 869" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND868  ,Set/Clear Pending Bit 868" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND867  ,Set/Clear Pending Bit 867" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND866  ,Set/Clear Pending Bit 866" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND865  ,Set/Clear Pending Bit 865" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND864  ,Set/Clear Pending Bit 864" "Not pending,Pending"
else
hgroup.long 0x026C++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)
group.long 0x0270++0x03
line.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND927  ,Set/Clear Pending Bit 927" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND926  ,Set/Clear Pending Bit 926" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND925  ,Set/Clear Pending Bit 925" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND924  ,Set/Clear Pending Bit 924" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND923  ,Set/Clear Pending Bit 923" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND922  ,Set/Clear Pending Bit 922" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND921  ,Set/Clear Pending Bit 921" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND920  ,Set/Clear Pending Bit 920" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND919  ,Set/Clear Pending Bit 919" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND918  ,Set/Clear Pending Bit 918" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND917  ,Set/Clear Pending Bit 917" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND916  ,Set/Clear Pending Bit 916" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND915  ,Set/Clear Pending Bit 915" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND914  ,Set/Clear Pending Bit 914" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND913  ,Set/Clear Pending Bit 913" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND912  ,Set/Clear Pending Bit 912" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND911  ,Set/Clear Pending Bit 911" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND910  ,Set/Clear Pending Bit 910" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND909  ,Set/Clear Pending Bit 909" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND908  ,Set/Clear Pending Bit 908" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND907  ,Set/Clear Pending Bit 907" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND906  ,Set/Clear Pending Bit 906" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND905  ,Set/Clear Pending Bit 905" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND904  ,Set/Clear Pending Bit 904" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND903  ,Set/Clear Pending Bit 903" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND902  ,Set/Clear Pending Bit 902" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND901  ,Set/Clear Pending Bit 901" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND900  ,Set/Clear Pending Bit 900" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND899  ,Set/Clear Pending Bit 899" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND898  ,Set/Clear Pending Bit 898" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND897  ,Set/Clear Pending Bit 897" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND896  ,Set/Clear Pending Bit 896" "Not pending,Pending"
else
hgroup.long 0x0270++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)
group.long 0x0274++0x03
line.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND959  ,Set/Clear Pending Bit 959" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND958  ,Set/Clear Pending Bit 958" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND957  ,Set/Clear Pending Bit 957" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND956  ,Set/Clear Pending Bit 956" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND955  ,Set/Clear Pending Bit 955" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND954  ,Set/Clear Pending Bit 954" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND953  ,Set/Clear Pending Bit 953" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND952  ,Set/Clear Pending Bit 952" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND951  ,Set/Clear Pending Bit 951" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND950  ,Set/Clear Pending Bit 950" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND949  ,Set/Clear Pending Bit 949" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND948  ,Set/Clear Pending Bit 948" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND947  ,Set/Clear Pending Bit 947" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND946  ,Set/Clear Pending Bit 946" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND945  ,Set/Clear Pending Bit 945" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND944  ,Set/Clear Pending Bit 944" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND943  ,Set/Clear Pending Bit 943" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND942  ,Set/Clear Pending Bit 942" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND941  ,Set/Clear Pending Bit 941" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND940  ,Set/Clear Pending Bit 940" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND939  ,Set/Clear Pending Bit 939" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND938  ,Set/Clear Pending Bit 938" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND937  ,Set/Clear Pending Bit 937" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND936  ,Set/Clear Pending Bit 936" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND935  ,Set/Clear Pending Bit 935" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND934  ,Set/Clear Pending Bit 934" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND933  ,Set/Clear Pending Bit 933" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND932  ,Set/Clear Pending Bit 932" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND931  ,Set/Clear Pending Bit 931" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND930  ,Set/Clear Pending Bit 930" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND929  ,Set/Clear Pending Bit 929" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND928  ,Set/Clear Pending Bit 928" "Not pending,Pending"
else
hgroup.long 0x0274++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)
group.long 0x0278++0x03
line.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND991  ,Set/Clear Pending Bit 991" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRPEND990  ,Set/Clear Pending Bit 990" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRPEND989  ,Set/Clear Pending Bit 989" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND988  ,Set/Clear Pending Bit 988" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRPEND987  ,Set/Clear Pending Bit 987" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRPEND986  ,Set/Clear Pending Bit 986" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND985  ,Set/Clear Pending Bit 985" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRPEND984  ,Set/Clear Pending Bit 984" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRPEND983  ,Set/Clear Pending Bit 983" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND982  ,Set/Clear Pending Bit 982" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRPEND981  ,Set/Clear Pending Bit 981" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRPEND980  ,Set/Clear Pending Bit 980" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND979  ,Set/Clear Pending Bit 979" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRPEND978  ,Set/Clear Pending Bit 978" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRPEND977  ,Set/Clear Pending Bit 977" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND976  ,Set/Clear Pending Bit 976" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRPEND975  ,Set/Clear Pending Bit 975" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRPEND974  ,Set/Clear Pending Bit 974" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND973  ,Set/Clear Pending Bit 973" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRPEND972  ,Set/Clear Pending Bit 972" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRPEND971  ,Set/Clear Pending Bit 971" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND970  ,Set/Clear Pending Bit 970" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRPEND969  ,Set/Clear Pending Bit 969" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRPEND968  ,Set/Clear Pending Bit 968" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND967  ,Set/Clear Pending Bit 967" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRPEND966  ,Set/Clear Pending Bit 966" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRPEND965  ,Set/Clear Pending Bit 965" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND964  ,Set/Clear Pending Bit 964" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRPEND963  ,Set/Clear Pending Bit 963" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRPEND962  ,Set/Clear Pending Bit 962" "Not pending,Pending"
textline "                               "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND961  ,Set/Clear Pending Bit 961" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRPEND960  ,Set/Clear Pending Bit 960" "Not pending,Pending"
else
hgroup.long 0x0278++0x03
hide.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30"
endif
tree.end
width 24.
tree "Set/Clear Active Registers"
if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10)
hgroup.long 0x0300++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER0,Interrupt Set/Clear Active Register 0"
newline
newline
newline
newline
newline
newline
newline
newline
newline
newline
else
group.long 0x0300++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER0,Interrupt Set/Clear Active Register 0"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE31  ,Set/Clear Active Bit 31" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE30  ,Set/Clear Active Bit 30" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE29  ,Set/Clear Active Bit 29" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE28  ,Set/Clear Active Bit 28" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE27  ,Set/Clear Active Bit 27" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE26  ,Set/Clear Active Bit 26" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE25  ,Set/Clear Active Bit 25" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE24  ,Set/Clear Active Bit 24" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE23  ,Set/Clear Active Bit 23" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE22  ,Set/Clear Active Bit 22" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE21  ,Set/Clear Active Bit 21" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE20  ,Set/Clear Active Bit 20" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE19  ,Set/Clear Active Bit 19" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE18  ,Set/Clear Active Bit 18" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE17  ,Set/Clear Active Bit 17" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE16  ,Set/Clear Active Bit 16" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE15  ,Set/Clear Active Bit 15" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE14  ,Set/Clear Active Bit 14" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE13  ,Set/Clear Active Bit 13" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE12  ,Set/Clear Active Bit 12" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE11  ,Set/Clear Active Bit 11" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE10  ,Set/Clear Active Bit 10" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE9   ,Set/Clear Active Bit 9" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE8   ,Set/Clear Active Bit 8" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE7   ,Set/Clear Active Bit 7" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE6   ,Set/Clear Active Bit 6" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE5   ,Set/Clear Active Bit 5" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE4   ,Set/Clear Active Bit 4" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE3   ,Set/Clear Active Bit 3" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE2   ,Set/Clear Active Bit 2" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE1   ,Set/Clear Active Bit 1" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE0   ,Set/Clear Active Bit 0" "Not active,Active"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01)
group.long 0x0304++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER1,Interrupt Set/Clear Active Register 1"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE63  ,Set/Clear Active Bit 63" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE62  ,Set/Clear Active Bit 62" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE61  ,Set/Clear Active Bit 61" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE60  ,Set/Clear Active Bit 60" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE59  ,Set/Clear Active Bit 59" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE58  ,Set/Clear Active Bit 58" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE57  ,Set/Clear Active Bit 57" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE56  ,Set/Clear Active Bit 56" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE55  ,Set/Clear Active Bit 55" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE54  ,Set/Clear Active Bit 54" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE53  ,Set/Clear Active Bit 53" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE52  ,Set/Clear Active Bit 52" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE51  ,Set/Clear Active Bit 51" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE50  ,Set/Clear Active Bit 50" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE49  ,Set/Clear Active Bit 49" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE48  ,Set/Clear Active Bit 48" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE47  ,Set/Clear Active Bit 47" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE46  ,Set/Clear Active Bit 46" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE45  ,Set/Clear Active Bit 45" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE44  ,Set/Clear Active Bit 44" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE43  ,Set/Clear Active Bit 43" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE42  ,Set/Clear Active Bit 42" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE41  ,Set/Clear Active Bit 41" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE40  ,Set/Clear Active Bit 40" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE39  ,Set/Clear Active Bit 39" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE38  ,Set/Clear Active Bit 38" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE37  ,Set/Clear Active Bit 37" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE36  ,Set/Clear Active Bit 36" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE35  ,Set/Clear Active Bit 35" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE34  ,Set/Clear Active Bit 34" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE33  ,Set/Clear Active Bit 33" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE32  ,Set/Clear Active Bit 32" "Not active,Active"
else
hgroup.long 0x0304++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER1,Interrupt Set/Clear Active Register 1"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02)
group.long 0x0308++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER2,Interrupt Set/Clear Active Register 2"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE95  ,Set/Clear Active Bit 95" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE94  ,Set/Clear Active Bit 94" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE93  ,Set/Clear Active Bit 93" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE92  ,Set/Clear Active Bit 92" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE91  ,Set/Clear Active Bit 91" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE90  ,Set/Clear Active Bit 90" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE89  ,Set/Clear Active Bit 89" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE88  ,Set/Clear Active Bit 88" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE87  ,Set/Clear Active Bit 87" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE86  ,Set/Clear Active Bit 86" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE85  ,Set/Clear Active Bit 85" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE84  ,Set/Clear Active Bit 84" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE83  ,Set/Clear Active Bit 83" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE82  ,Set/Clear Active Bit 82" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE81  ,Set/Clear Active Bit 81" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE80  ,Set/Clear Active Bit 80" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE79  ,Set/Clear Active Bit 79" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE78  ,Set/Clear Active Bit 78" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE77  ,Set/Clear Active Bit 77" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE76  ,Set/Clear Active Bit 76" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE75  ,Set/Clear Active Bit 75" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE74  ,Set/Clear Active Bit 74" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE73  ,Set/Clear Active Bit 73" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE72  ,Set/Clear Active Bit 72" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE71  ,Set/Clear Active Bit 71" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE70  ,Set/Clear Active Bit 70" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE69  ,Set/Clear Active Bit 69" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE68  ,Set/Clear Active Bit 68" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE67  ,Set/Clear Active Bit 67" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE66  ,Set/Clear Active Bit 66" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE65  ,Set/Clear Active Bit 65" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE64  ,Set/Clear Active Bit 64" "Not active,Active"
else
hgroup.long 0x0308++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER2,Interrupt Set/Clear Active Register 2"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03)
group.long 0x030C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER3,Interrupt Set/Clear Active Register 3"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE127 ,Set/Clear Active Bit 127" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE126 ,Set/Clear Active Bit 126" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE125 ,Set/Clear Active Bit 125" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE124 ,Set/Clear Active Bit 124" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE123 ,Set/Clear Active Bit 123" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE122 ,Set/Clear Active Bit 122" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE121 ,Set/Clear Active Bit 121" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE120 ,Set/Clear Active Bit 120" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE119 ,Set/Clear Active Bit 119" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE118 ,Set/Clear Active Bit 118" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE117 ,Set/Clear Active Bit 117" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE116 ,Set/Clear Active Bit 116" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE115 ,Set/Clear Active Bit 115" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE114 ,Set/Clear Active Bit 114" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE113 ,Set/Clear Active Bit 113" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE112 ,Set/Clear Active Bit 112" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE111 ,Set/Clear Active Bit 111" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE110 ,Set/Clear Active Bit 110" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE109 ,Set/Clear Active Bit 109" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE108 ,Set/Clear Active Bit 108" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE107 ,Set/Clear Active Bit 107" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE106 ,Set/Clear Active Bit 106" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE105 ,Set/Clear Active Bit 105" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE104 ,Set/Clear Active Bit 104" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE103 ,Set/Clear Active Bit 103" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE102 ,Set/Clear Active Bit 102" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE101 ,Set/Clear Active Bit 101" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE100 ,Set/Clear Active Bit 100" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE99  ,Set/Clear Active Bit 99" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE98  ,Set/Clear Active Bit 98" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE97  ,Set/Clear Active Bit 97" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE96  ,Set/Clear Active Bit 96" "Not active,Active"
else
hgroup.long 0x030C++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER3,Interrupt Set/Clear Active Register 3"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04)
group.long 0x0310++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER4,Interrupt Set/Clear Active Register 4"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE159 ,Set/Clear Active Bit 159" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE158 ,Set/Clear Active Bit 158" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE157 ,Set/Clear Active Bit 157" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE156 ,Set/Clear Active Bit 156" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE155 ,Set/Clear Active Bit 155" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE154 ,Set/Clear Active Bit 154" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE153 ,Set/Clear Active Bit 153" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE152 ,Set/Clear Active Bit 152" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE151 ,Set/Clear Active Bit 151" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE150 ,Set/Clear Active Bit 150" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE149 ,Set/Clear Active Bit 149" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE148 ,Set/Clear Active Bit 148" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE147 ,Set/Clear Active Bit 147" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE146 ,Set/Clear Active Bit 146" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE145 ,Set/Clear Active Bit 145" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE144 ,Set/Clear Active Bit 144" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE143 ,Set/Clear Active Bit 143" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE142 ,Set/Clear Active Bit 142" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE141 ,Set/Clear Active Bit 141" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE140 ,Set/Clear Active Bit 140" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE139 ,Set/Clear Active Bit 139" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE138 ,Set/Clear Active Bit 138" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE137 ,Set/Clear Active Bit 137" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE136 ,Set/Clear Active Bit 136" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE135 ,Set/Clear Active Bit 135" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE134 ,Set/Clear Active Bit 134" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE133 ,Set/Clear Active Bit 133" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE132 ,Set/Clear Active Bit 132" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE131 ,Set/Clear Active Bit 131" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE130 ,Set/Clear Active Bit 130" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE129 ,Set/Clear Active Bit 129" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE128 ,Set/Clear Active Bit 128" "Not active,Active"
else
hgroup.long 0x0310++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER4,Interrupt Set/Clear Active Register 4"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05)
group.long 0x0314++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER5,Interrupt Set/Clear Active Register 5"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE191 ,Set/Clear Active Bit 191" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE190 ,Set/Clear Active Bit 190" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE189 ,Set/Clear Active Bit 189" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE188 ,Set/Clear Active Bit 188" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE187 ,Set/Clear Active Bit 187" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE186 ,Set/Clear Active Bit 186" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE185 ,Set/Clear Active Bit 185" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE184 ,Set/Clear Active Bit 184" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE183 ,Set/Clear Active Bit 183" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE182 ,Set/Clear Active Bit 182" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE181 ,Set/Clear Active Bit 181" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE180 ,Set/Clear Active Bit 180" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE179 ,Set/Clear Active Bit 179" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE178 ,Set/Clear Active Bit 178" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE177 ,Set/Clear Active Bit 177" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE176 ,Set/Clear Active Bit 176" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE175 ,Set/Clear Active Bit 175" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE174 ,Set/Clear Active Bit 174" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE173 ,Set/Clear Active Bit 173" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE172 ,Set/Clear Active Bit 172" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE171 ,Set/Clear Active Bit 171" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE170 ,Set/Clear Active Bit 170" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE169 ,Set/Clear Active Bit 169" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE168 ,Set/Clear Active Bit 168" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE167 ,Set/Clear Active Bit 167" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE166 ,Set/Clear Active Bit 166" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE165 ,Set/Clear Active Bit 165" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE164 ,Set/Clear Active Bit 164" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE163 ,Set/Clear Active Bit 163" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE162 ,Set/Clear Active Bit 162" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE161 ,Set/Clear Active Bit 161" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE160 ,Set/Clear Active Bit 160" "Not active,Active"
else
hgroup.long 0x0314++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER5,Interrupt Set/Clear Active Register 5"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06)
group.long 0x0318++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER6,Interrupt Set/Clear Active Register 6"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE223 ,Set/Clear Active Bit 223" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE222 ,Set/Clear Active Bit 222" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE221 ,Set/Clear Active Bit 221" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE220 ,Set/Clear Active Bit 220" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE219 ,Set/Clear Active Bit 219" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE218 ,Set/Clear Active Bit 218" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE217 ,Set/Clear Active Bit 217" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE216 ,Set/Clear Active Bit 216" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE215 ,Set/Clear Active Bit 215" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE214 ,Set/Clear Active Bit 214" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE213 ,Set/Clear Active Bit 213" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE212 ,Set/Clear Active Bit 212" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE211 ,Set/Clear Active Bit 211" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE210 ,Set/Clear Active Bit 210" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE209 ,Set/Clear Active Bit 209" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE208 ,Set/Clear Active Bit 208" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE207 ,Set/Clear Active Bit 207" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE206 ,Set/Clear Active Bit 206" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE205 ,Set/Clear Active Bit 205" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE204 ,Set/Clear Active Bit 204" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE203 ,Set/Clear Active Bit 203" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE202 ,Set/Clear Active Bit 202" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE201 ,Set/Clear Active Bit 201" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE200 ,Set/Clear Active Bit 200" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE199 ,Set/Clear Active Bit 199" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE198 ,Set/Clear Active Bit 198" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE197 ,Set/Clear Active Bit 197" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE196 ,Set/Clear Active Bit 196" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE195 ,Set/Clear Active Bit 195" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE194 ,Set/Clear Active Bit 194" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE193 ,Set/Clear Active Bit 193" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE192 ,Set/Clear Active Bit 192" "Not active,Active"
else
hgroup.long 0x0318++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER6,Interrupt Set/Clear Active Register 6"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07)
group.long 0x031C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER7,Interrupt Set/Clear Active Register 7"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE255 ,Set/Clear Active Bit 255" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE254 ,Set/Clear Active Bit 254" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE253 ,Set/Clear Active Bit 253" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE252 ,Set/Clear Active Bit 252" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE251 ,Set/Clear Active Bit 251" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE250 ,Set/Clear Active Bit 250" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE249 ,Set/Clear Active Bit 249" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE248 ,Set/Clear Active Bit 248" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE247 ,Set/Clear Active Bit 247" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE246 ,Set/Clear Active Bit 246" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE245 ,Set/Clear Active Bit 245" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE244 ,Set/Clear Active Bit 244" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE243 ,Set/Clear Active Bit 243" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE242 ,Set/Clear Active Bit 242" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE241 ,Set/Clear Active Bit 241" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE240 ,Set/Clear Active Bit 240" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE239 ,Set/Clear Active Bit 239" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE238 ,Set/Clear Active Bit 238" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE237 ,Set/Clear Active Bit 237" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE236 ,Set/Clear Active Bit 236" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE235 ,Set/Clear Active Bit 235" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE234 ,Set/Clear Active Bit 234" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE233 ,Set/Clear Active Bit 233" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE232 ,Set/Clear Active Bit 232" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE231 ,Set/Clear Active Bit 231" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE230 ,Set/Clear Active Bit 230" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE229 ,Set/Clear Active Bit 229" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE228 ,Set/Clear Active Bit 228" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE227 ,Set/Clear Active Bit 227" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE226 ,Set/Clear Active Bit 226" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE225 ,Set/Clear Active Bit 225" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE224 ,Set/Clear Active Bit 224" "Not active,Active"
else
hgroup.long 0x031C++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER7,Interrupt Set/Clear Active Register 7"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08)
group.long 0x0320++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER8,Interrupt Set/Clear Active Register 8"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE287 ,Set/Clear Active Bit 287" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE286 ,Set/Clear Active Bit 286" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE285 ,Set/Clear Active Bit 285" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE284 ,Set/Clear Active Bit 284" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE283 ,Set/Clear Active Bit 283" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE282 ,Set/Clear Active Bit 282" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE281 ,Set/Clear Active Bit 281" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE280 ,Set/Clear Active Bit 280" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE279 ,Set/Clear Active Bit 279" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE278 ,Set/Clear Active Bit 278" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE277 ,Set/Clear Active Bit 277" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE276 ,Set/Clear Active Bit 276" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE275 ,Set/Clear Active Bit 275" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE274 ,Set/Clear Active Bit 274" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE273 ,Set/Clear Active Bit 273" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE272 ,Set/Clear Active Bit 272" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE271 ,Set/Clear Active Bit 271" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE270 ,Set/Clear Active Bit 270" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE269 ,Set/Clear Active Bit 269" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE268 ,Set/Clear Active Bit 268" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE267 ,Set/Clear Active Bit 267" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE266 ,Set/Clear Active Bit 266" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE265 ,Set/Clear Active Bit 265" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE264 ,Set/Clear Active Bit 264" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE263 ,Set/Clear Active Bit 263" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE262 ,Set/Clear Active Bit 262" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE261 ,Set/Clear Active Bit 261" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE260 ,Set/Clear Active Bit 260" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE259 ,Set/Clear Active Bit 259" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE258 ,Set/Clear Active Bit 258" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE257 ,Set/Clear Active Bit 257" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE256 ,Set/Clear Active Bit 256" "Not active,Active"
else
hgroup.long 0x0320++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER8,Interrupt Set/Clear Active Register 8"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09)
group.long 0x0324++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER9,Interrupt Set/Clear Active Register 9"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE319 ,Set/Clear Active Bit 319" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE318 ,Set/Clear Active Bit 318" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE317 ,Set/Clear Active Bit 317" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE316 ,Set/Clear Active Bit 316" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE315 ,Set/Clear Active Bit 315" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE314 ,Set/Clear Active Bit 314" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE313 ,Set/Clear Active Bit 313" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE312 ,Set/Clear Active Bit 312" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE311 ,Set/Clear Active Bit 311" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE310 ,Set/Clear Active Bit 310" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE309 ,Set/Clear Active Bit 309" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE308 ,Set/Clear Active Bit 308" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE307 ,Set/Clear Active Bit 307" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE306 ,Set/Clear Active Bit 306" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE305 ,Set/Clear Active Bit 305" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE304 ,Set/Clear Active Bit 304" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE303 ,Set/Clear Active Bit 303" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE302 ,Set/Clear Active Bit 302" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE301 ,Set/Clear Active Bit 301" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE300 ,Set/Clear Active Bit 300" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE299 ,Set/Clear Active Bit 299" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE298 ,Set/Clear Active Bit 298" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE297 ,Set/Clear Active Bit 297" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE296 ,Set/Clear Active Bit 296" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE295 ,Set/Clear Active Bit 295" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE294 ,Set/Clear Active Bit 294" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE293 ,Set/Clear Active Bit 293" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE292 ,Set/Clear Active Bit 292" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE291 ,Set/Clear Active Bit 291" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE290 ,Set/Clear Active Bit 290" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE289 ,Set/Clear Active Bit 289" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE288 ,Set/Clear Active Bit 288" "Not active,Active"
else
hgroup.long 0x0324++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER9,Interrupt Set/Clear Active Register 9"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A)
group.long 0x0328++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER10,Interrupt Set/Clear Active Register 10"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE351 ,Set/Clear Active Bit 351" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE350 ,Set/Clear Active Bit 350" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE349 ,Set/Clear Active Bit 349" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE348 ,Set/Clear Active Bit 348" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE347 ,Set/Clear Active Bit 347" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE346 ,Set/Clear Active Bit 346" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE345 ,Set/Clear Active Bit 345" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE344 ,Set/Clear Active Bit 344" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE343 ,Set/Clear Active Bit 343" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE342 ,Set/Clear Active Bit 342" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE341 ,Set/Clear Active Bit 341" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE340 ,Set/Clear Active Bit 340" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE339 ,Set/Clear Active Bit 339" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE338 ,Set/Clear Active Bit 338" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE337 ,Set/Clear Active Bit 337" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE336 ,Set/Clear Active Bit 336" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE335 ,Set/Clear Active Bit 335" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE334 ,Set/Clear Active Bit 334" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE333 ,Set/Clear Active Bit 333" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE332 ,Set/Clear Active Bit 332" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE331 ,Set/Clear Active Bit 331" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE330 ,Set/Clear Active Bit 330" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE329 ,Set/Clear Active Bit 329" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE328 ,Set/Clear Active Bit 328" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE327 ,Set/Clear Active Bit 327" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE326 ,Set/Clear Active Bit 326" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE325 ,Set/Clear Active Bit 325" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE324 ,Set/Clear Active Bit 324" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE323 ,Set/Clear Active Bit 323" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE322 ,Set/Clear Active Bit 322" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE321 ,Set/Clear Active Bit 321" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE320 ,Set/Clear Active Bit 320" "Not active,Active"
else
hgroup.long 0x0328++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER10,Interrupt Set/Clear Active Register 10"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B)
group.long 0x032C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER11,Interrupt Set/Clear Active Register 11"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE383 ,Set/Clear Active Bit 383" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE382 ,Set/Clear Active Bit 382" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE381 ,Set/Clear Active Bit 381" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE380 ,Set/Clear Active Bit 380" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE379 ,Set/Clear Active Bit 379" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE378 ,Set/Clear Active Bit 378" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE377 ,Set/Clear Active Bit 377" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE376 ,Set/Clear Active Bit 376" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE375 ,Set/Clear Active Bit 375" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE374 ,Set/Clear Active Bit 374" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE373 ,Set/Clear Active Bit 373" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE372 ,Set/Clear Active Bit 372" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE371 ,Set/Clear Active Bit 371" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE370 ,Set/Clear Active Bit 370" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE369 ,Set/Clear Active Bit 369" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE368 ,Set/Clear Active Bit 368" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE367 ,Set/Clear Active Bit 367" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE366 ,Set/Clear Active Bit 366" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE365 ,Set/Clear Active Bit 365" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE364 ,Set/Clear Active Bit 364" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE363 ,Set/Clear Active Bit 363" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE362 ,Set/Clear Active Bit 362" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE361 ,Set/Clear Active Bit 361" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE360 ,Set/Clear Active Bit 360" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE359 ,Set/Clear Active Bit 359" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE358 ,Set/Clear Active Bit 358" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE357 ,Set/Clear Active Bit 357" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE356 ,Set/Clear Active Bit 356" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE355 ,Set/Clear Active Bit 355" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE354 ,Set/Clear Active Bit 354" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE353 ,Set/Clear Active Bit 353" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE352 ,Set/Clear Active Bit 352" "Not active,Active"
else
hgroup.long 0x032C++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER11,Interrupt Set/Clear Active Register 11"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C)
group.long 0x0330++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER12,Interrupt Set/Clear Active Register 12"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE415 ,Set/Clear Active Bit 415" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE414 ,Set/Clear Active Bit 414" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE413 ,Set/Clear Active Bit 413" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE412 ,Set/Clear Active Bit 412" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE411 ,Set/Clear Active Bit 411" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE410 ,Set/Clear Active Bit 410" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE409 ,Set/Clear Active Bit 409" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE408 ,Set/Clear Active Bit 408" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE407 ,Set/Clear Active Bit 407" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE406 ,Set/Clear Active Bit 406" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE405 ,Set/Clear Active Bit 405" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE404 ,Set/Clear Active Bit 404" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE403 ,Set/Clear Active Bit 403" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE402 ,Set/Clear Active Bit 402" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE401 ,Set/Clear Active Bit 401" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE400 ,Set/Clear Active Bit 400" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE399 ,Set/Clear Active Bit 399" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE398 ,Set/Clear Active Bit 398" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE397 ,Set/Clear Active Bit 397" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE396 ,Set/Clear Active Bit 396" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE395 ,Set/Clear Active Bit 395" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE394 ,Set/Clear Active Bit 394" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE393 ,Set/Clear Active Bit 393" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE392 ,Set/Clear Active Bit 392" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE391 ,Set/Clear Active Bit 391" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE390 ,Set/Clear Active Bit 390" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE389 ,Set/Clear Active Bit 389" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE388 ,Set/Clear Active Bit 388" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE387 ,Set/Clear Active Bit 387" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE386 ,Set/Clear Active Bit 386" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE385 ,Set/Clear Active Bit 385" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE384 ,Set/Clear Active Bit 384" "Not active,Active"
else
hgroup.long 0x0330++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER12,Interrupt Set/Clear Active Register 12"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D)
group.long 0x0334++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER13,Interrupt Set/Clear Active Register 13"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE447 ,Set/Clear Active Bit 447" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE446 ,Set/Clear Active Bit 446" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE445 ,Set/Clear Active Bit 445" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE444 ,Set/Clear Active Bit 444" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE443 ,Set/Clear Active Bit 443" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE442 ,Set/Clear Active Bit 442" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE441 ,Set/Clear Active Bit 441" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE440 ,Set/Clear Active Bit 440" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE439 ,Set/Clear Active Bit 439" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE438 ,Set/Clear Active Bit 438" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE437 ,Set/Clear Active Bit 437" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE436 ,Set/Clear Active Bit 436" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE435 ,Set/Clear Active Bit 435" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE434 ,Set/Clear Active Bit 434" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE433 ,Set/Clear Active Bit 433" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE432 ,Set/Clear Active Bit 432" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE431 ,Set/Clear Active Bit 431" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE430 ,Set/Clear Active Bit 430" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE429 ,Set/Clear Active Bit 429" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE428 ,Set/Clear Active Bit 428" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE427 ,Set/Clear Active Bit 427" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE426 ,Set/Clear Active Bit 426" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE425 ,Set/Clear Active Bit 425" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE424 ,Set/Clear Active Bit 424" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE423 ,Set/Clear Active Bit 423" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE422 ,Set/Clear Active Bit 422" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE421 ,Set/Clear Active Bit 421" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE420 ,Set/Clear Active Bit 420" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE419 ,Set/Clear Active Bit 419" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE418 ,Set/Clear Active Bit 418" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE417 ,Set/Clear Active Bit 417" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE416 ,Set/Clear Active Bit 416" "Not active,Active"
else
hgroup.long 0x0334++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER13,Interrupt Set/Clear Active Register 13"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E)
group.long 0x0338++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER14,Interrupt Set/Clear Active Register 14"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE479 ,Set/Clear Active Bit 479" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE478 ,Set/Clear Active Bit 478" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE477 ,Set/Clear Active Bit 477" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE476 ,Set/Clear Active Bit 476" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE475 ,Set/Clear Active Bit 475" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE474 ,Set/Clear Active Bit 474" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE473 ,Set/Clear Active Bit 473" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE472 ,Set/Clear Active Bit 472" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE471 ,Set/Clear Active Bit 471" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE470 ,Set/Clear Active Bit 470" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE469 ,Set/Clear Active Bit 469" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE468 ,Set/Clear Active Bit 468" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE467 ,Set/Clear Active Bit 467" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE466 ,Set/Clear Active Bit 466" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE465 ,Set/Clear Active Bit 465" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE464 ,Set/Clear Active Bit 464" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE463 ,Set/Clear Active Bit 463" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE462 ,Set/Clear Active Bit 462" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE461 ,Set/Clear Active Bit 461" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE460 ,Set/Clear Active Bit 460" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE459 ,Set/Clear Active Bit 459" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE458 ,Set/Clear Active Bit 458" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE457 ,Set/Clear Active Bit 457" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE456 ,Set/Clear Active Bit 456" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE455 ,Set/Clear Active Bit 455" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE454 ,Set/Clear Active Bit 454" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE453 ,Set/Clear Active Bit 453" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE452 ,Set/Clear Active Bit 452" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE451 ,Set/Clear Active Bit 451" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE450 ,Set/Clear Active Bit 450" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE449 ,Set/Clear Active Bit 449" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE448 ,Set/Clear Active Bit 448" "Not active,Active"
else
hgroup.long 0x0338++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER14,Interrupt Set/Clear Active Register 14"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F)
group.long 0x033C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER15,Interrupt Set/Clear Active Register 15"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE511 ,Set/Clear Active Bit 511" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE510 ,Set/Clear Active Bit 510" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE509 ,Set/Clear Active Bit 509" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE508 ,Set/Clear Active Bit 508" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE507 ,Set/Clear Active Bit 507" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE506 ,Set/Clear Active Bit 506" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE505 ,Set/Clear Active Bit 505" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE504 ,Set/Clear Active Bit 504" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE503 ,Set/Clear Active Bit 503" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE502 ,Set/Clear Active Bit 502" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE501 ,Set/Clear Active Bit 501" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE500 ,Set/Clear Active Bit 500" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE499 ,Set/Clear Active Bit 499" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE498 ,Set/Clear Active Bit 498" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE497 ,Set/Clear Active Bit 497" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE496 ,Set/Clear Active Bit 496" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE495 ,Set/Clear Active Bit 495" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE494 ,Set/Clear Active Bit 494" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE493 ,Set/Clear Active Bit 493" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE492 ,Set/Clear Active Bit 492" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE491 ,Set/Clear Active Bit 491" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE490 ,Set/Clear Active Bit 490" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE489 ,Set/Clear Active Bit 489" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE488 ,Set/Clear Active Bit 488" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE487 ,Set/Clear Active Bit 487" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE486 ,Set/Clear Active Bit 486" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE485 ,Set/Clear Active Bit 485" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE484 ,Set/Clear Active Bit 484" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE483 ,Set/Clear Active Bit 483" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE482 ,Set/Clear Active Bit 482" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE481 ,Set/Clear Active Bit 481" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE480 ,Set/Clear Active Bit 480" "Not active,Active"
else
hgroup.long 0x033C++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER15,Interrupt Set/Clear Active Register 15"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)
group.long 0x0340++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER16,Interrupt Set/Clear Active Register 16"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE543 ,Set/Clear Active Bit 543" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE542 ,Set/Clear Active Bit 542" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE541 ,Set/Clear Active Bit 541" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE540 ,Set/Clear Active Bit 540" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE539 ,Set/Clear Active Bit 539" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE538 ,Set/Clear Active Bit 538" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE537 ,Set/Clear Active Bit 537" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE536 ,Set/Clear Active Bit 536" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE535 ,Set/Clear Active Bit 535" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE534 ,Set/Clear Active Bit 534" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE533 ,Set/Clear Active Bit 533" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE532 ,Set/Clear Active Bit 532" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE531 ,Set/Clear Active Bit 531" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE530 ,Set/Clear Active Bit 530" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE529 ,Set/Clear Active Bit 529" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE528 ,Set/Clear Active Bit 528" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE527 ,Set/Clear Active Bit 527" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE526 ,Set/Clear Active Bit 526" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE525 ,Set/Clear Active Bit 525" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE524 ,Set/Clear Active Bit 524" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE523 ,Set/Clear Active Bit 523" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE522 ,Set/Clear Active Bit 522" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE521 ,Set/Clear Active Bit 521" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE520 ,Set/Clear Active Bit 520" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE519 ,Set/Clear Active Bit 519" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE518 ,Set/Clear Active Bit 518" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE517 ,Set/Clear Active Bit 517" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE516 ,Set/Clear Active Bit 516" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE515 ,Set/Clear Active Bit 515" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE514 ,Set/Clear Active Bit 514" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE513 ,Set/Clear Active Bit 513" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE512 ,Set/Clear Active Bit 512" "Not active,Active"
else
hgroup.long 0x0340++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER16,Interrupt Set/Clear Active Register 16"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)
group.long 0x0344++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER17,Interrupt Set/Clear Active Register 17"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE575 ,Set/Clear Active Bit 575" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE574 ,Set/Clear Active Bit 574" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE573 ,Set/Clear Active Bit 573" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE572 ,Set/Clear Active Bit 572" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE571 ,Set/Clear Active Bit 571" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE570 ,Set/Clear Active Bit 570" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE569 ,Set/Clear Active Bit 569" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE568 ,Set/Clear Active Bit 568" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE567 ,Set/Clear Active Bit 567" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE566 ,Set/Clear Active Bit 566" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE565 ,Set/Clear Active Bit 565" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE564 ,Set/Clear Active Bit 564" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE563 ,Set/Clear Active Bit 563" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE562 ,Set/Clear Active Bit 562" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE561 ,Set/Clear Active Bit 561" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE560 ,Set/Clear Active Bit 560" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE559 ,Set/Clear Active Bit 559" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE558 ,Set/Clear Active Bit 558" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE557 ,Set/Clear Active Bit 557" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE556 ,Set/Clear Active Bit 556" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE555 ,Set/Clear Active Bit 555" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE554 ,Set/Clear Active Bit 554" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE553 ,Set/Clear Active Bit 553" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE552 ,Set/Clear Active Bit 552" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE551 ,Set/Clear Active Bit 551" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE550 ,Set/Clear Active Bit 550" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE549 ,Set/Clear Active Bit 549" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE548 ,Set/Clear Active Bit 548" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE547 ,Set/Clear Active Bit 547" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE546 ,Set/Clear Active Bit 546" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE545 ,Set/Clear Active Bit 545" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE544 ,Set/Clear Active Bit 544" "Not active,Active"
else
hgroup.long 0x0344++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER17,Interrupt Set/Clear Active Register 17"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)
group.long 0x0348++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER18,Interrupt Set/Clear Active Register 18"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE607 ,Set/Clear Active Bit 607" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE606 ,Set/Clear Active Bit 606" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE605 ,Set/Clear Active Bit 605" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE604 ,Set/Clear Active Bit 604" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE603 ,Set/Clear Active Bit 603" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE602 ,Set/Clear Active Bit 602" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE601 ,Set/Clear Active Bit 601" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE600 ,Set/Clear Active Bit 600" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE599 ,Set/Clear Active Bit 599" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE598 ,Set/Clear Active Bit 598" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE597 ,Set/Clear Active Bit 597" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE596 ,Set/Clear Active Bit 596" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE595 ,Set/Clear Active Bit 595" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE594 ,Set/Clear Active Bit 594" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE593 ,Set/Clear Active Bit 593" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE592 ,Set/Clear Active Bit 592" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE591 ,Set/Clear Active Bit 591" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE590 ,Set/Clear Active Bit 590" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE589 ,Set/Clear Active Bit 589" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE588 ,Set/Clear Active Bit 588" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE587 ,Set/Clear Active Bit 587" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE586 ,Set/Clear Active Bit 586" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE585 ,Set/Clear Active Bit 585" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE584 ,Set/Clear Active Bit 584" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE583 ,Set/Clear Active Bit 583" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE582 ,Set/Clear Active Bit 582" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE581 ,Set/Clear Active Bit 581" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE580 ,Set/Clear Active Bit 580" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE579 ,Set/Clear Active Bit 579" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE578 ,Set/Clear Active Bit 578" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE577 ,Set/Clear Active Bit 577" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE576 ,Set/Clear Active Bit 576" "Not active,Active"
else
hgroup.long 0x0348++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER18,Interrupt Set/Clear Active Register 18"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)
group.long 0x034C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER19,Interrupt Set/Clear Active Register 19"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE639 ,Set/Clear Active Bit 639" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE638 ,Set/Clear Active Bit 638" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE637 ,Set/Clear Active Bit 637" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE636 ,Set/Clear Active Bit 636" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE635 ,Set/Clear Active Bit 635" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE634 ,Set/Clear Active Bit 634" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE633 ,Set/Clear Active Bit 633" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE632 ,Set/Clear Active Bit 632" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE631 ,Set/Clear Active Bit 631" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE630 ,Set/Clear Active Bit 630" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE629 ,Set/Clear Active Bit 629" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE628 ,Set/Clear Active Bit 628" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE627 ,Set/Clear Active Bit 627" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE626 ,Set/Clear Active Bit 626" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE625 ,Set/Clear Active Bit 625" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE624 ,Set/Clear Active Bit 624" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE623 ,Set/Clear Active Bit 623" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE622 ,Set/Clear Active Bit 622" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE621 ,Set/Clear Active Bit 621" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE620 ,Set/Clear Active Bit 620" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE619 ,Set/Clear Active Bit 619" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE618 ,Set/Clear Active Bit 618" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE617 ,Set/Clear Active Bit 617" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE616 ,Set/Clear Active Bit 616" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE615 ,Set/Clear Active Bit 615" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE614 ,Set/Clear Active Bit 614" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE613 ,Set/Clear Active Bit 613" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE612 ,Set/Clear Active Bit 612" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE611 ,Set/Clear Active Bit 611" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE610 ,Set/Clear Active Bit 610" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE609 ,Set/Clear Active Bit 609" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE608 ,Set/Clear Active Bit 608" "Not active,Active"
else
hgroup.long 0x034C++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER19,Interrupt Set/Clear Active Register 19"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)
group.long 0x0350++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER20,Interrupt Set/Clear Active Register 20"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE671 ,Set/Clear Active Bit 671" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE670 ,Set/Clear Active Bit 670" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE669 ,Set/Clear Active Bit 669" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE668 ,Set/Clear Active Bit 668" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE667 ,Set/Clear Active Bit 667" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE666 ,Set/Clear Active Bit 666" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE665 ,Set/Clear Active Bit 665" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE664 ,Set/Clear Active Bit 664" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE663 ,Set/Clear Active Bit 663" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE662 ,Set/Clear Active Bit 662" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE661 ,Set/Clear Active Bit 661" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE660 ,Set/Clear Active Bit 660" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE659 ,Set/Clear Active Bit 659" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE658 ,Set/Clear Active Bit 658" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE657 ,Set/Clear Active Bit 657" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE656 ,Set/Clear Active Bit 656" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE655 ,Set/Clear Active Bit 655" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE654 ,Set/Clear Active Bit 654" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE653 ,Set/Clear Active Bit 653" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE652 ,Set/Clear Active Bit 652" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE651 ,Set/Clear Active Bit 651" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE650 ,Set/Clear Active Bit 650" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE649 ,Set/Clear Active Bit 649" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE648 ,Set/Clear Active Bit 648" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE647 ,Set/Clear Active Bit 647" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE646 ,Set/Clear Active Bit 646" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE645 ,Set/Clear Active Bit 645" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE644 ,Set/Clear Active Bit 644" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE643 ,Set/Clear Active Bit 643" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE642 ,Set/Clear Active Bit 642" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE641 ,Set/Clear Active Bit 641" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE640 ,Set/Clear Active Bit 640" "Not active,Active"
else
hgroup.long 0x0350++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER20,Interrupt Set/Clear Active Register 20"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)
group.long 0x0354++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER21,Interrupt Set/Clear Active Register 21"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE703 ,Set/Clear Active Bit 703" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE702 ,Set/Clear Active Bit 702" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE701 ,Set/Clear Active Bit 701" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE700 ,Set/Clear Active Bit 700" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE699 ,Set/Clear Active Bit 699" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE698 ,Set/Clear Active Bit 698" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE697 ,Set/Clear Active Bit 697" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE696 ,Set/Clear Active Bit 696" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE695 ,Set/Clear Active Bit 695" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE694 ,Set/Clear Active Bit 694" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE693 ,Set/Clear Active Bit 693" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE692 ,Set/Clear Active Bit 692" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE691 ,Set/Clear Active Bit 691" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE690 ,Set/Clear Active Bit 690" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE689 ,Set/Clear Active Bit 689" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE688 ,Set/Clear Active Bit 688" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE687 ,Set/Clear Active Bit 687" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE686 ,Set/Clear Active Bit 686" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE685 ,Set/Clear Active Bit 685" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE684 ,Set/Clear Active Bit 684" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE683 ,Set/Clear Active Bit 683" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE682 ,Set/Clear Active Bit 682" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE681 ,Set/Clear Active Bit 681" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE680 ,Set/Clear Active Bit 680" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE679 ,Set/Clear Active Bit 679" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE678 ,Set/Clear Active Bit 678" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE677 ,Set/Clear Active Bit 677" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE676 ,Set/Clear Active Bit 676" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE675 ,Set/Clear Active Bit 675" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE674 ,Set/Clear Active Bit 674" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE673 ,Set/Clear Active Bit 673" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE672 ,Set/Clear Active Bit 672" "Not active,Active"
else
hgroup.long 0x0354++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER21,Interrupt Set/Clear Active Register 21"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)
group.long 0x0358++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER22,Interrupt Set/Clear Active Register 22"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE735 ,Set/Clear Active Bit 735" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE734 ,Set/Clear Active Bit 734" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE733 ,Set/Clear Active Bit 733" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE732 ,Set/Clear Active Bit 732" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE731 ,Set/Clear Active Bit 731" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE730 ,Set/Clear Active Bit 730" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE729 ,Set/Clear Active Bit 729" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE728 ,Set/Clear Active Bit 728" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE727 ,Set/Clear Active Bit 727" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE726 ,Set/Clear Active Bit 726" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE725 ,Set/Clear Active Bit 725" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE724 ,Set/Clear Active Bit 724" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE723 ,Set/Clear Active Bit 723" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE722 ,Set/Clear Active Bit 722" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE721 ,Set/Clear Active Bit 721" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE720 ,Set/Clear Active Bit 720" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE719 ,Set/Clear Active Bit 719" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE718 ,Set/Clear Active Bit 718" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE717 ,Set/Clear Active Bit 717" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE716 ,Set/Clear Active Bit 716" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE715 ,Set/Clear Active Bit 715" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE714 ,Set/Clear Active Bit 714" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE713 ,Set/Clear Active Bit 713" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE712 ,Set/Clear Active Bit 712" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE711 ,Set/Clear Active Bit 711" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE710 ,Set/Clear Active Bit 710" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE709 ,Set/Clear Active Bit 709" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE708 ,Set/Clear Active Bit 708" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE707 ,Set/Clear Active Bit 707" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE706 ,Set/Clear Active Bit 706" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE705 ,Set/Clear Active Bit 705" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE704 ,Set/Clear Active Bit 704" "Not active,Active"
else
hgroup.long 0x0358++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER22,Interrupt Set/Clear Active Register 22"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)
group.long 0x035C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER23,Interrupt Set/Clear Active Register 23"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE767 ,Set/Clear Active Bit 767" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE766 ,Set/Clear Active Bit 766" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE765 ,Set/Clear Active Bit 765" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE764 ,Set/Clear Active Bit 764" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE763 ,Set/Clear Active Bit 763" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE762 ,Set/Clear Active Bit 762" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE761 ,Set/Clear Active Bit 761" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE760 ,Set/Clear Active Bit 760" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE759 ,Set/Clear Active Bit 759" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE758 ,Set/Clear Active Bit 758" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE757 ,Set/Clear Active Bit 757" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE756 ,Set/Clear Active Bit 756" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE755 ,Set/Clear Active Bit 755" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE754 ,Set/Clear Active Bit 754" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE753 ,Set/Clear Active Bit 753" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE752 ,Set/Clear Active Bit 752" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE751 ,Set/Clear Active Bit 751" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE750 ,Set/Clear Active Bit 750" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE749 ,Set/Clear Active Bit 749" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE748 ,Set/Clear Active Bit 748" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE747 ,Set/Clear Active Bit 747" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE746 ,Set/Clear Active Bit 746" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE745 ,Set/Clear Active Bit 745" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE744 ,Set/Clear Active Bit 744" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE743 ,Set/Clear Active Bit 743" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE742 ,Set/Clear Active Bit 742" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE741 ,Set/Clear Active Bit 741" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE740 ,Set/Clear Active Bit 740" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE739 ,Set/Clear Active Bit 739" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE738 ,Set/Clear Active Bit 738" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE737 ,Set/Clear Active Bit 737" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE736 ,Set/Clear Active Bit 736" "Not active,Active"
else
hgroup.long 0x035C++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER23,Interrupt Set/Clear Active Register 23"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)
group.long 0x0360++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER24,Interrupt Set/Clear Active Register 24"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE799 ,Set/Clear Active Bit 799" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE798 ,Set/Clear Active Bit 798" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE797 ,Set/Clear Active Bit 797" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE796 ,Set/Clear Active Bit 796" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE795 ,Set/Clear Active Bit 795" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE794 ,Set/Clear Active Bit 794" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE793 ,Set/Clear Active Bit 793" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE792 ,Set/Clear Active Bit 792" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE791 ,Set/Clear Active Bit 791" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE790 ,Set/Clear Active Bit 790" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE789 ,Set/Clear Active Bit 789" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE788 ,Set/Clear Active Bit 788" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE787 ,Set/Clear Active Bit 787" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE786 ,Set/Clear Active Bit 786" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE785 ,Set/Clear Active Bit 785" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE784 ,Set/Clear Active Bit 784" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE783 ,Set/Clear Active Bit 783" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE782 ,Set/Clear Active Bit 782" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE781 ,Set/Clear Active Bit 781" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE780 ,Set/Clear Active Bit 780" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE779 ,Set/Clear Active Bit 779" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE778 ,Set/Clear Active Bit 778" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE777 ,Set/Clear Active Bit 777" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE776 ,Set/Clear Active Bit 776" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE775 ,Set/Clear Active Bit 775" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE774 ,Set/Clear Active Bit 774" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE773 ,Set/Clear Active Bit 773" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE772 ,Set/Clear Active Bit 772" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE771 ,Set/Clear Active Bit 771" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE770 ,Set/Clear Active Bit 770" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE769 ,Set/Clear Active Bit 769" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE768 ,Set/Clear Active Bit 768" "Not active,Active"
else
hgroup.long 0x0360++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER24,Interrupt Set/Clear Active Register 24"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)
group.long 0x0364++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER25,Interrupt Set/Clear Active Register 25"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE831 ,Set/Clear Active Bit 831" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE830 ,Set/Clear Active Bit 830" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE829 ,Set/Clear Active Bit 829" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE828 ,Set/Clear Active Bit 828" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE827 ,Set/Clear Active Bit 827" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE826 ,Set/Clear Active Bit 826" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE825 ,Set/Clear Active Bit 825" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE824 ,Set/Clear Active Bit 824" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE823 ,Set/Clear Active Bit 823" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE822 ,Set/Clear Active Bit 822" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE821 ,Set/Clear Active Bit 821" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE820 ,Set/Clear Active Bit 820" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE819 ,Set/Clear Active Bit 819" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE818 ,Set/Clear Active Bit 818" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE817 ,Set/Clear Active Bit 817" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE816 ,Set/Clear Active Bit 816" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE815 ,Set/Clear Active Bit 815" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE814 ,Set/Clear Active Bit 814" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE813 ,Set/Clear Active Bit 813" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE812 ,Set/Clear Active Bit 812" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE811 ,Set/Clear Active Bit 811" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE810 ,Set/Clear Active Bit 810" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE809 ,Set/Clear Active Bit 809" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE808 ,Set/Clear Active Bit 808" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE807 ,Set/Clear Active Bit 807" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE806 ,Set/Clear Active Bit 806" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE805 ,Set/Clear Active Bit 805" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE804 ,Set/Clear Active Bit 804" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE803 ,Set/Clear Active Bit 803" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE802 ,Set/Clear Active Bit 802" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE801 ,Set/Clear Active Bit 801" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE800 ,Set/Clear Active Bit 800" "Not active,Active"
else
hgroup.long 0x0364++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER25,Interrupt Set/Clear Active Register 25"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A)
group.long 0x0368++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER26,Interrupt Set/Clear Active Register 26"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE863 ,Set/Clear Active Bit 863" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE862 ,Set/Clear Active Bit 862" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE861 ,Set/Clear Active Bit 861" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE860 ,Set/Clear Active Bit 860" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE859 ,Set/Clear Active Bit 859" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE858 ,Set/Clear Active Bit 858" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE857 ,Set/Clear Active Bit 857" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE856 ,Set/Clear Active Bit 856" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE855 ,Set/Clear Active Bit 855" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE854 ,Set/Clear Active Bit 854" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE853 ,Set/Clear Active Bit 853" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE852 ,Set/Clear Active Bit 852" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE851 ,Set/Clear Active Bit 851" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE850 ,Set/Clear Active Bit 850" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE849 ,Set/Clear Active Bit 849" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE848 ,Set/Clear Active Bit 848" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE847 ,Set/Clear Active Bit 847" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE846 ,Set/Clear Active Bit 846" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE845 ,Set/Clear Active Bit 845" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE844 ,Set/Clear Active Bit 844" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE843 ,Set/Clear Active Bit 843" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE842 ,Set/Clear Active Bit 842" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE841 ,Set/Clear Active Bit 841" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE840 ,Set/Clear Active Bit 840" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE839 ,Set/Clear Active Bit 839" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE838 ,Set/Clear Active Bit 838" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE837 ,Set/Clear Active Bit 837" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE836 ,Set/Clear Active Bit 836" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE835 ,Set/Clear Active Bit 835" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE834 ,Set/Clear Active Bit 834" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE833 ,Set/Clear Active Bit 833" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE832 ,Set/Clear Active Bit 832" "Not active,Active"
else
hgroup.long 0x0368++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER26,Interrupt Set/Clear Active Register 26"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)
group.long 0x036C++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER27,Interrupt Set/Clear Active Register 27"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE895 ,Set/Clear Active Bit 895" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE894 ,Set/Clear Active Bit 894" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE893 ,Set/Clear Active Bit 893" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE892 ,Set/Clear Active Bit 892" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE891 ,Set/Clear Active Bit 891" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE890 ,Set/Clear Active Bit 890" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE889 ,Set/Clear Active Bit 889" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE888 ,Set/Clear Active Bit 888" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE887 ,Set/Clear Active Bit 887" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE886 ,Set/Clear Active Bit 886" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE885 ,Set/Clear Active Bit 885" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE884 ,Set/Clear Active Bit 884" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE883 ,Set/Clear Active Bit 883" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE882 ,Set/Clear Active Bit 882" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE881 ,Set/Clear Active Bit 881" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE880 ,Set/Clear Active Bit 880" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE879 ,Set/Clear Active Bit 879" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE878 ,Set/Clear Active Bit 878" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE877 ,Set/Clear Active Bit 877" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE876 ,Set/Clear Active Bit 876" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE875 ,Set/Clear Active Bit 875" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE874 ,Set/Clear Active Bit 874" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE873 ,Set/Clear Active Bit 873" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE872 ,Set/Clear Active Bit 872" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE871 ,Set/Clear Active Bit 871" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE870 ,Set/Clear Active Bit 870" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE869 ,Set/Clear Active Bit 869" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE868 ,Set/Clear Active Bit 868" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE867 ,Set/Clear Active Bit 867" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE866 ,Set/Clear Active Bit 866" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE865 ,Set/Clear Active Bit 865" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE864 ,Set/Clear Active Bit 864" "Not active,Active"
else
hgroup.long 0x036C++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER27,Interrupt Set/Clear Active Register 27"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)
group.long 0x0370++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER28,Interrupt Set/Clear Active Register 28"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE927 ,Set/Clear Active Bit 927" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE926 ,Set/Clear Active Bit 926" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE925 ,Set/Clear Active Bit 925" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE924 ,Set/Clear Active Bit 924" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE923 ,Set/Clear Active Bit 923" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE922 ,Set/Clear Active Bit 922" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE921 ,Set/Clear Active Bit 921" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE920 ,Set/Clear Active Bit 920" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE919 ,Set/Clear Active Bit 919" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE918 ,Set/Clear Active Bit 918" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE917 ,Set/Clear Active Bit 917" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE916 ,Set/Clear Active Bit 916" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE915 ,Set/Clear Active Bit 915" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE914 ,Set/Clear Active Bit 914" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE913 ,Set/Clear Active Bit 913" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE912 ,Set/Clear Active Bit 912" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE911 ,Set/Clear Active Bit 911" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE910 ,Set/Clear Active Bit 910" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE909 ,Set/Clear Active Bit 909" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE908 ,Set/Clear Active Bit 908" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE907 ,Set/Clear Active Bit 907" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE906 ,Set/Clear Active Bit 906" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE905 ,Set/Clear Active Bit 905" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE904 ,Set/Clear Active Bit 904" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE903 ,Set/Clear Active Bit 903" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE902 ,Set/Clear Active Bit 902" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE901 ,Set/Clear Active Bit 901" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE900 ,Set/Clear Active Bit 900" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE899 ,Set/Clear Active Bit 899" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE898 ,Set/Clear Active Bit 898" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE897 ,Set/Clear Active Bit 897" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE896 ,Set/Clear Active Bit 896" "Not active,Active"
else
hgroup.long 0x0370++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER28,Interrupt Set/Clear Active Register 28"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)
group.long 0x0374++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER29,Interrupt Set/Clear Active Register 29"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE959 ,Set/Clear Active Bit 959" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE958 ,Set/Clear Active Bit 958" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE957 ,Set/Clear Active Bit 957" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE956 ,Set/Clear Active Bit 956" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE955 ,Set/Clear Active Bit 955" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE954 ,Set/Clear Active Bit 954" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE953 ,Set/Clear Active Bit 953" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE952 ,Set/Clear Active Bit 952" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE951 ,Set/Clear Active Bit 951" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE950 ,Set/Clear Active Bit 950" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE949 ,Set/Clear Active Bit 949" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE948 ,Set/Clear Active Bit 948" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE947 ,Set/Clear Active Bit 947" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE946 ,Set/Clear Active Bit 946" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE945 ,Set/Clear Active Bit 945" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE944 ,Set/Clear Active Bit 944" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE943 ,Set/Clear Active Bit 943" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE942 ,Set/Clear Active Bit 942" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE941 ,Set/Clear Active Bit 941" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE940 ,Set/Clear Active Bit 940" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE939 ,Set/Clear Active Bit 939" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE938 ,Set/Clear Active Bit 938" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE937 ,Set/Clear Active Bit 937" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE936 ,Set/Clear Active Bit 936" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE935 ,Set/Clear Active Bit 935" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE934 ,Set/Clear Active Bit 934" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE933 ,Set/Clear Active Bit 933" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE932 ,Set/Clear Active Bit 932" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE931 ,Set/Clear Active Bit 931" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE930 ,Set/Clear Active Bit 930" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE929 ,Set/Clear Active Bit 929" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE928 ,Set/Clear Active Bit 928" "Not active,Active"
else
hgroup.long 0x0374++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER29,Interrupt Set/Clear Active Register 29"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)
group.long 0x0378++0x03
line.long 0x0 "GICD_SET/CLR_ACTIVER30,Interrupt Set/Clear Active Register 30"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRACTIVE991 ,Set/Clear Active Bit 991" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE990 ,Set/Clear Active Bit 990" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE989 ,Set/Clear Active Bit 989" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRACTIVE988 ,Set/Clear Active Bit 988" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE987 ,Set/Clear Active Bit 987" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE986 ,Set/Clear Active Bit 986" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRACTIVE985 ,Set/Clear Active Bit 985" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE984 ,Set/Clear Active Bit 984" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE983 ,Set/Clear Active Bit 983" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRACTIVE982 ,Set/Clear Active Bit 982" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE981 ,Set/Clear Active Bit 981" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE980 ,Set/Clear Active Bit 980" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRACTIVE979 ,Set/Clear Active Bit 979" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE978 ,Set/Clear Active Bit 978" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE977 ,Set/Clear Active Bit 977" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRACTIVE976 ,Set/Clear Active Bit 976" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE975 ,Set/Clear Active Bit 975" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE974 ,Set/Clear Active Bit 974" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRACTIVE973 ,Set/Clear Active Bit 973" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE972 ,Set/Clear Active Bit 972" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE971 ,Set/Clear Active Bit 971" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRACTIVE970 ,Set/Clear Active Bit 970" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE969 ,Set/Clear Active Bit 969" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE968 ,Set/Clear Active Bit 968" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRACTIVE967 ,Set/Clear Active Bit 967" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE966 ,Set/Clear Active Bit 966" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE965 ,Set/Clear Active Bit 965" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRACTIVE964 ,Set/Clear Active Bit 964" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE963 ,Set/Clear Active Bit 963" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE962 ,Set/Clear Active Bit 962" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRACTIVE961 ,Set/Clear Active Bit 961" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE960 ,Set/Clear Active Bit 960" "Not active,Active"
else
hgroup.long 0x0378++0x03
hide.long 0x0 "GICD_SET/CLR_ACTIVER30,Interrupt Set/Clear Active Register 30"
endif
tree.end
width 20.
tree "Priority Registers"
if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10)
hgroup.long 0x400++0x03
hide.long 0x00 "GICD_IPRIORITYR0,Interrupt Priority Register 0"
hgroup.long 0x404++0x03
hide.long 0x00 "GICD_IPRIORITYR1,Interrupt Priority Register 1"
hgroup.long 0x408++0x03
hide.long 0x00 "GICD_IPRIORITYR2,Interrupt Priority Register 2"
hgroup.long 0x40C++0x03
hide.long 0x00 "GICD_IPRIORITYR3,Interrupt Priority Register 3"
hgroup.long 0x410++0x03
hide.long 0x00 "GICD_IPRIORITYR4,Interrupt Priority Register 4"
hgroup.long 0x414++0x03
hide.long 0x00 "GICD_IPRIORITYR5,Interrupt Priority Register 5"
hgroup.long 0x418++0x03
hide.long 0x00 "GICD_IPRIORITYR6,Interrupt Priority Register 6"
hgroup.long 0x41C++0x03
hide.long 0x00 "GICD_IPRIORITYR7,Interrupt Priority Register 7"
else
group.long 0x400++0x03
line.long 0x00 "GICD_IPRIORITYR0,Interrupt Priority Register 0"
hexmask.long.byte 0x00 24.--31. 1. " INTID3    ,Interrupt ID3    Priority/Priority Byte Offset 3   "
hexmask.long.byte 0x00 16.--23. 1. "  INTID2    ,Interrupt ID2     Priority/Priority Byte Offset 2   "
hexmask.long.byte 0x00 8.--15. 1. "  INTID1    ,Interrupt ID1    Priority/Priority Byte Offset 1   "
hexmask.long.byte 0x00 0.--7. 1. "  INTID0    ,Interrupt ID0     Priority/Priority Byte Offset 0   "
group.long 0x404++0x03
line.long 0x00 "GICD_IPRIORITYR1,Interrupt Priority Register 1"
hexmask.long.byte 0x00 24.--31. 1. " INTID7    ,Interrupt ID7    Priority/Priority Byte Offset 7   "
hexmask.long.byte 0x00 16.--23. 1. "  INTID6    ,Interrupt ID6     Priority/Priority Byte Offset 6   "
hexmask.long.byte 0x00 8.--15. 1. "  INTID5    ,Interrupt ID5    Priority/Priority Byte Offset 5   "
hexmask.long.byte 0x00 0.--7. 1. "  INTID4    ,Interrupt ID4     Priority/Priority Byte Offset 4   "
group.long 0x408++0x03
line.long 0x00 "GICD_IPRIORITYR2,Interrupt Priority Register 2"
hexmask.long.byte 0x00 24.--31. 1. " INTID11   ,Interrupt ID11   Priority/Priority Byte Offset 11  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID10   ,Interrupt ID10    Priority/Priority Byte Offset 10  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID9    ,Interrupt ID9    Priority/Priority Byte Offset 9   "
hexmask.long.byte 0x00 0.--7. 1. "  INTID8    ,Interrupt ID8     Priority/Priority Byte Offset 8   "
group.long 0x40C++0x03
line.long 0x00 "GICD_IPRIORITYR3,Interrupt Priority Register 3"
hexmask.long.byte 0x00 24.--31. 1. " INTID15   ,Interrupt ID15   Priority/Priority Byte Offset 15  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID14   ,Interrupt ID14    Priority/Priority Byte Offset 14  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID13   ,Interrupt ID13   Priority/Priority Byte Offset 13  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID12   ,Interrupt ID12    Priority/Priority Byte Offset 12  "
group.long 0x410++0x03
line.long 0x00 "GICD_IPRIORITYR4,Interrupt Priority Register 4"
hexmask.long.byte 0x00 24.--31. 1. " INTID19   ,Interrupt ID19   Priority/Priority Byte Offset 19  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID18   ,Interrupt ID18    Priority/Priority Byte Offset 18  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID17   ,Interrupt ID17   Priority/Priority Byte Offset 17  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID16   ,Interrupt ID16    Priority/Priority Byte Offset 16  "
group.long 0x414++0x03
line.long 0x00 "GICD_IPRIORITYR5,Interrupt Priority Register 5"
hexmask.long.byte 0x00 24.--31. 1. " INTID23   ,Interrupt ID23   Priority/Priority Byte Offset 23  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID22   ,Interrupt ID22    Priority/Priority Byte Offset 22  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID21   ,Interrupt ID21   Priority/Priority Byte Offset 21  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID20   ,Interrupt ID20    Priority/Priority Byte Offset 20  "
group.long 0x418++0x03
line.long 0x00 "GICD_IPRIORITYR6,Interrupt Priority Register 6"
hexmask.long.byte 0x00 24.--31. 1. " INTID27   ,Interrupt ID27   Priority/Priority Byte Offset 27  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID26   ,Interrupt ID26    Priority/Priority Byte Offset 26  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID25   ,Interrupt ID25   Priority/Priority Byte Offset 25  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID24   ,Interrupt ID24    Priority/Priority Byte Offset 24  "
group.long 0x41C++0x03
line.long 0x00 "GICD_IPRIORITYR7,Interrupt Priority Register 7"
hexmask.long.byte 0x00 24.--31. 1. " INTID31   ,Interrupt ID31   Priority/Priority Byte Offset 31  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID30   ,Interrupt ID30    Priority/Priority Byte Offset 30  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID29   ,Interrupt ID29   Priority/Priority Byte Offset 29  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID28   ,Interrupt ID28    Priority/Priority Byte Offset 28  "
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01)
group.long 0x420++0x03
line.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8"
hexmask.long.byte 0x00 24.--31. 1. " INTID35   ,Interrupt ID35   Priority/Priority Byte Offset 35  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID34   ,Interrupt ID34    Priority/Priority Byte Offset 34  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID33   ,Interrupt ID33   Priority/Priority Byte Offset 33  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID32   ,Interrupt ID32    Priority/Priority Byte Offset 32  "
group.long 0x424++0x03
line.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9"
hexmask.long.byte 0x00 24.--31. 1. " INTID39   ,Interrupt ID39   Priority/Priority Byte Offset 39  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID38   ,Interrupt ID38    Priority/Priority Byte Offset 38  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID37   ,Interrupt ID37   Priority/Priority Byte Offset 37  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID36   ,Interrupt ID36    Priority/Priority Byte Offset 36  "
group.long 0x428++0x03
line.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10"
hexmask.long.byte 0x00 24.--31. 1. " INTID43   ,Interrupt ID43   Priority/Priority Byte Offset 43  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID42   ,Interrupt ID42    Priority/Priority Byte Offset 42  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID41   ,Interrupt ID41   Priority/Priority Byte Offset 41  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID40   ,Interrupt ID40    Priority/Priority Byte Offset 40  "
group.long 0x42C++0x03
line.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11"
hexmask.long.byte 0x00 24.--31. 1. " INTID47   ,Interrupt ID47   Priority/Priority Byte Offset 47  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID46   ,Interrupt ID46    Priority/Priority Byte Offset 46  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID45   ,Interrupt ID45   Priority/Priority Byte Offset 45  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID44   ,Interrupt ID44    Priority/Priority Byte Offset 44  "
group.long 0x430++0x03
line.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12"
hexmask.long.byte 0x00 24.--31. 1. " INTID51   ,Interrupt ID51   Priority/Priority Byte Offset 51  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID50   ,Interrupt ID50    Priority/Priority Byte Offset 50  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID49   ,Interrupt ID49   Priority/Priority Byte Offset 49  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID48   ,Interrupt ID48    Priority/Priority Byte Offset 48  "
group.long 0x434++0x03
line.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13"
hexmask.long.byte 0x00 24.--31. 1. " INTID55   ,Interrupt ID55   Priority/Priority Byte Offset 55  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID54   ,Interrupt ID54    Priority/Priority Byte Offset 54  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID53   ,Interrupt ID53   Priority/Priority Byte Offset 53  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID52   ,Interrupt ID52    Priority/Priority Byte Offset 52  "
group.long 0x438++0x03
line.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14"
hexmask.long.byte 0x00 24.--31. 1. " INTID59   ,Interrupt ID59   Priority/Priority Byte Offset 59  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID58   ,Interrupt ID58    Priority/Priority Byte Offset 58  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID57   ,Interrupt ID57   Priority/Priority Byte Offset 57  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID56   ,Interrupt ID56    Priority/Priority Byte Offset 56  "
group.long 0x43C++0x03
line.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15"
hexmask.long.byte 0x00 24.--31. 1. " INTID63   ,Interrupt ID63   Priority/Priority Byte Offset 63  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID62   ,Interrupt ID62    Priority/Priority Byte Offset 62  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID61   ,Interrupt ID61   Priority/Priority Byte Offset 61  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID60   ,Interrupt ID60    Priority/Priority Byte Offset 60  "
else
hgroup.long 0x420++0x03
hide.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8"
hgroup.long 0x424++0x03
hide.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9"
hgroup.long 0x428++0x03
hide.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10"
hgroup.long 0x42C++0x03
hide.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11"
hgroup.long 0x430++0x03
hide.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12"
hgroup.long 0x434++0x03
hide.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13"
hgroup.long 0x438++0x03
hide.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14"
hgroup.long 0x43C++0x03
hide.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02)
group.long 0x440++0x03
line.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16"
hexmask.long.byte 0x00 24.--31. 1. " INTID67   ,Interrupt ID67   Priority/Priority Byte Offset 67  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID66   ,Interrupt ID66    Priority/Priority Byte Offset 66  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID65   ,Interrupt ID65   Priority/Priority Byte Offset 65  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID64   ,Interrupt ID64    Priority/Priority Byte Offset 64  "
group.long 0x444++0x03
line.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17"
hexmask.long.byte 0x00 24.--31. 1. " INTID71   ,Interrupt ID71   Priority/Priority Byte Offset 71  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID70   ,Interrupt ID70    Priority/Priority Byte Offset 70  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID69   ,Interrupt ID69   Priority/Priority Byte Offset 69  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID68   ,Interrupt ID68    Priority/Priority Byte Offset 68  "
group.long 0x448++0x03
line.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18"
hexmask.long.byte 0x00 24.--31. 1. " INTID75   ,Interrupt ID75   Priority/Priority Byte Offset 75  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID74   ,Interrupt ID74    Priority/Priority Byte Offset 74  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID73   ,Interrupt ID73   Priority/Priority Byte Offset 73  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID72   ,Interrupt ID72    Priority/Priority Byte Offset 72  "
group.long 0x44C++0x03
line.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19"
hexmask.long.byte 0x00 24.--31. 1. " INTID79   ,Interrupt ID79   Priority/Priority Byte Offset 79  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID78   ,Interrupt ID78    Priority/Priority Byte Offset 78  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID77   ,Interrupt ID77   Priority/Priority Byte Offset 77  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID76   ,Interrupt ID76    Priority/Priority Byte Offset 76  "
group.long 0x450++0x03
line.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20"
hexmask.long.byte 0x00 24.--31. 1. " INTID83   ,Interrupt ID83   Priority/Priority Byte Offset 83  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID82   ,Interrupt ID82    Priority/Priority Byte Offset 82  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID81   ,Interrupt ID81   Priority/Priority Byte Offset 81  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID80   ,Interrupt ID80    Priority/Priority Byte Offset 80  "
group.long 0x454++0x03
line.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21"
hexmask.long.byte 0x00 24.--31. 1. " INTID87   ,Interrupt ID87   Priority/Priority Byte Offset 87  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID86   ,Interrupt ID86    Priority/Priority Byte Offset 86  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID85   ,Interrupt ID85   Priority/Priority Byte Offset 85  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID84   ,Interrupt ID84    Priority/Priority Byte Offset 84  "
group.long 0x458++0x03
line.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22"
hexmask.long.byte 0x00 24.--31. 1. " INTID91   ,Interrupt ID91   Priority/Priority Byte Offset 91  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID90   ,Interrupt ID90    Priority/Priority Byte Offset 90  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID89   ,Interrupt ID89   Priority/Priority Byte Offset 89  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID88   ,Interrupt ID88    Priority/Priority Byte Offset 88  "
group.long 0x45C++0x03
line.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23"
hexmask.long.byte 0x00 24.--31. 1. " INTID95   ,Interrupt ID95   Priority/Priority Byte Offset 95  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID94   ,Interrupt ID94    Priority/Priority Byte Offset 94  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID93   ,Interrupt ID93   Priority/Priority Byte Offset 93  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID92   ,Interrupt ID92    Priority/Priority Byte Offset 92  "
else
hgroup.long 0x440++0x03
hide.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16"
hgroup.long 0x444++0x03
hide.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17"
hgroup.long 0x448++0x03
hide.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18"
hgroup.long 0x44C++0x03
hide.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19"
hgroup.long 0x450++0x03
hide.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20"
hgroup.long 0x454++0x03
hide.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21"
hgroup.long 0x458++0x03
hide.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22"
hgroup.long 0x45C++0x03
hide.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03)
group.long 0x460++0x03
line.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24"
hexmask.long.byte 0x00 24.--31. 1. " INTID99   ,Interrupt ID99   Priority/Priority Byte Offset 99  "
hexmask.long.byte 0x00 16.--23. 1. "  INTID98   ,Interrupt ID98    Priority/Priority Byte Offset 98  "
hexmask.long.byte 0x00 8.--15. 1. "  INTID97   ,Interrupt ID97   Priority/Priority Byte Offset 97  "
hexmask.long.byte 0x00 0.--7. 1. "  INTID96   ,Interrupt ID96    Priority/Priority Byte Offset 96  "
group.long 0x464++0x03
line.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25"
hexmask.long.byte 0x00 24.--31. 1. " INTID103  ,Interrupt ID103  Priority/Priority Byte Offset 103 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID102  ,Interrupt ID102   Priority/Priority Byte Offset 102 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID101  ,Interrupt ID101  Priority/Priority Byte Offset 101 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID100  ,Interrupt ID100   Priority/Priority Byte Offset 100 "
group.long 0x468++0x03
line.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26"
hexmask.long.byte 0x00 24.--31. 1. " INTID107  ,Interrupt ID107  Priority/Priority Byte Offset 107 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID106  ,Interrupt ID106   Priority/Priority Byte Offset 106 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID105  ,Interrupt ID105  Priority/Priority Byte Offset 105 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID104  ,Interrupt ID104   Priority/Priority Byte Offset 104 "
group.long 0x46C++0x03
line.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27"
hexmask.long.byte 0x00 24.--31. 1. " INTID111  ,Interrupt ID111  Priority/Priority Byte Offset 111 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID110  ,Interrupt ID110   Priority/Priority Byte Offset 110 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID109  ,Interrupt ID109  Priority/Priority Byte Offset 109 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID108  ,Interrupt ID108   Priority/Priority Byte Offset 108 "
group.long 0x470++0x03
line.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28"
hexmask.long.byte 0x00 24.--31. 1. " INTID115  ,Interrupt ID115  Priority/Priority Byte Offset 115 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID114  ,Interrupt ID114   Priority/Priority Byte Offset 114 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID113  ,Interrupt ID113  Priority/Priority Byte Offset 113 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID112  ,Interrupt ID112   Priority/Priority Byte Offset 112 "
group.long 0x474++0x03
line.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29"
hexmask.long.byte 0x00 24.--31. 1. " INTID119  ,Interrupt ID119  Priority/Priority Byte Offset 119 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID118  ,Interrupt ID118   Priority/Priority Byte Offset 118 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID117  ,Interrupt ID117  Priority/Priority Byte Offset 117 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID116  ,Interrupt ID116   Priority/Priority Byte Offset 116 "
group.long 0x478++0x03
line.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30"
hexmask.long.byte 0x00 24.--31. 1. " INTID123  ,Interrupt ID123  Priority/Priority Byte Offset 123 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID122  ,Interrupt ID122   Priority/Priority Byte Offset 122 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID121  ,Interrupt ID121  Priority/Priority Byte Offset 121 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID120  ,Interrupt ID120   Priority/Priority Byte Offset 120 "
group.long 0x47C++0x03
line.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31"
hexmask.long.byte 0x00 24.--31. 1. " INTID127  ,Interrupt ID127  Priority/Priority Byte Offset 127 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID126  ,Interrupt ID126   Priority/Priority Byte Offset 126 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID125  ,Interrupt ID125  Priority/Priority Byte Offset 125 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID124  ,Interrupt ID124   Priority/Priority Byte Offset 124 "
else
hgroup.long 0x460++0x03
hide.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24"
hgroup.long 0x464++0x03
hide.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25"
hgroup.long 0x468++0x03
hide.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26"
hgroup.long 0x46C++0x03
hide.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27"
hgroup.long 0x470++0x03
hide.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28"
hgroup.long 0x474++0x03
hide.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29"
hgroup.long 0x478++0x03
hide.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30"
hgroup.long 0x47C++0x03
hide.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04)
group.long 0x480++0x03
line.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32"
hexmask.long.byte 0x00 24.--31. 1. " INTID131  ,Interrupt ID131  Priority/Priority Byte Offset 131 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID130  ,Interrupt ID130   Priority/Priority Byte Offset 130 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID129  ,Interrupt ID129  Priority/Priority Byte Offset 129 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID128  ,Interrupt ID128   Priority/Priority Byte Offset 128 "
group.long 0x484++0x03
line.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33"
hexmask.long.byte 0x00 24.--31. 1. " INTID135  ,Interrupt ID135  Priority/Priority Byte Offset 135 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID134  ,Interrupt ID134   Priority/Priority Byte Offset 134 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID133  ,Interrupt ID133  Priority/Priority Byte Offset 133 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID132  ,Interrupt ID132   Priority/Priority Byte Offset 132 "
group.long 0x488++0x03
line.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34"
hexmask.long.byte 0x00 24.--31. 1. " INTID139  ,Interrupt ID139  Priority/Priority Byte Offset 139 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID138  ,Interrupt ID138   Priority/Priority Byte Offset 138 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID137  ,Interrupt ID137  Priority/Priority Byte Offset 137 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID136  ,Interrupt ID136   Priority/Priority Byte Offset 136 "
group.long 0x48C++0x03
line.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35"
hexmask.long.byte 0x00 24.--31. 1. " INTID143  ,Interrupt ID143  Priority/Priority Byte Offset 143 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID142  ,Interrupt ID142   Priority/Priority Byte Offset 142 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID141  ,Interrupt ID141  Priority/Priority Byte Offset 141 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID140  ,Interrupt ID140   Priority/Priority Byte Offset 140 "
group.long 0x490++0x03
line.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36"
hexmask.long.byte 0x00 24.--31. 1. " INTID147  ,Interrupt ID147  Priority/Priority Byte Offset 147 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID146  ,Interrupt ID146   Priority/Priority Byte Offset 146 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID145  ,Interrupt ID145  Priority/Priority Byte Offset 145 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID144  ,Interrupt ID144   Priority/Priority Byte Offset 144 "
group.long 0x494++0x03
line.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37"
hexmask.long.byte 0x00 24.--31. 1. " INTID151  ,Interrupt ID151  Priority/Priority Byte Offset 151 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID150  ,Interrupt ID150   Priority/Priority Byte Offset 150 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID149  ,Interrupt ID149  Priority/Priority Byte Offset 149 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID148  ,Interrupt ID148   Priority/Priority Byte Offset 148 "
group.long 0x498++0x03
line.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38"
hexmask.long.byte 0x00 24.--31. 1. " INTID155  ,Interrupt ID155  Priority/Priority Byte Offset 155 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID154  ,Interrupt ID154   Priority/Priority Byte Offset 154 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID153  ,Interrupt ID153  Priority/Priority Byte Offset 153 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID152  ,Interrupt ID152   Priority/Priority Byte Offset 152 "
group.long 0x49C++0x03
line.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39"
hexmask.long.byte 0x00 24.--31. 1. " INTID159  ,Interrupt ID159  Priority/Priority Byte Offset 159 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID158  ,Interrupt ID158   Priority/Priority Byte Offset 158 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID157  ,Interrupt ID157  Priority/Priority Byte Offset 157 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID156  ,Interrupt ID156   Priority/Priority Byte Offset 156 "
else
hgroup.long 0x480++0x03
hide.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32"
hgroup.long 0x484++0x03
hide.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33"
hgroup.long 0x488++0x03
hide.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34"
hgroup.long 0x48C++0x03
hide.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35"
hgroup.long 0x490++0x03
hide.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36"
hgroup.long 0x494++0x03
hide.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37"
hgroup.long 0x498++0x03
hide.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38"
hgroup.long 0x49C++0x03
hide.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05)
group.long 0x4A0++0x03
line.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40"
hexmask.long.byte 0x00 24.--31. 1. " INTID163  ,Interrupt ID163  Priority/Priority Byte Offset 163 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID162  ,Interrupt ID162   Priority/Priority Byte Offset 162 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID161  ,Interrupt ID161  Priority/Priority Byte Offset 161 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID160  ,Interrupt ID160   Priority/Priority Byte Offset 160 "
group.long 0x4A4++0x03
line.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41"
hexmask.long.byte 0x00 24.--31. 1. " INTID167  ,Interrupt ID167  Priority/Priority Byte Offset 167 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID166  ,Interrupt ID166   Priority/Priority Byte Offset 166 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID165  ,Interrupt ID165  Priority/Priority Byte Offset 165 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID164  ,Interrupt ID164   Priority/Priority Byte Offset 164 "
group.long 0x4A8++0x03
line.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42"
hexmask.long.byte 0x00 24.--31. 1. " INTID171  ,Interrupt ID171  Priority/Priority Byte Offset 171 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID170  ,Interrupt ID170   Priority/Priority Byte Offset 170 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID169  ,Interrupt ID169  Priority/Priority Byte Offset 169 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID168  ,Interrupt ID168   Priority/Priority Byte Offset 168 "
group.long 0x4AC++0x03
line.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43"
hexmask.long.byte 0x00 24.--31. 1. " INTID175  ,Interrupt ID175  Priority/Priority Byte Offset 175 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID174  ,Interrupt ID174   Priority/Priority Byte Offset 174 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID173  ,Interrupt ID173  Priority/Priority Byte Offset 173 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID172  ,Interrupt ID172   Priority/Priority Byte Offset 172 "
group.long 0x4B0++0x03
line.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44"
hexmask.long.byte 0x00 24.--31. 1. " INTID179  ,Interrupt ID179  Priority/Priority Byte Offset 179 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID178  ,Interrupt ID178   Priority/Priority Byte Offset 178 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID177  ,Interrupt ID177  Priority/Priority Byte Offset 177 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID176  ,Interrupt ID176   Priority/Priority Byte Offset 176 "
group.long 0x4B4++0x03
line.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45"
hexmask.long.byte 0x00 24.--31. 1. " INTID183  ,Interrupt ID183  Priority/Priority Byte Offset 183 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID182  ,Interrupt ID182   Priority/Priority Byte Offset 182 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID181  ,Interrupt ID181  Priority/Priority Byte Offset 181 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID180  ,Interrupt ID180   Priority/Priority Byte Offset 180 "
group.long 0x4B8++0x03
line.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46"
hexmask.long.byte 0x00 24.--31. 1. " INTID187  ,Interrupt ID187  Priority/Priority Byte Offset 187 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID186  ,Interrupt ID186   Priority/Priority Byte Offset 186 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID185  ,Interrupt ID185  Priority/Priority Byte Offset 185 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID184  ,Interrupt ID184   Priority/Priority Byte Offset 184 "
group.long 0x4BC++0x03
line.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47"
hexmask.long.byte 0x00 24.--31. 1. " INTID191  ,Interrupt ID191  Priority/Priority Byte Offset 191 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID190  ,Interrupt ID190   Priority/Priority Byte Offset 190 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID189  ,Interrupt ID189  Priority/Priority Byte Offset 189 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID188  ,Interrupt ID188   Priority/Priority Byte Offset 188 "
else
hgroup.long 0x4A0++0x03
hide.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40"
hgroup.long 0x4A4++0x03
hide.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41"
hgroup.long 0x4A8++0x03
hide.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42"
hgroup.long 0x4AC++0x03
hide.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43"
hgroup.long 0x4B0++0x03
hide.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44"
hgroup.long 0x4B4++0x03
hide.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45"
hgroup.long 0x4B8++0x03
hide.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46"
hgroup.long 0x4BC++0x03
hide.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06)
group.long 0x4C0++0x03
line.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48"
hexmask.long.byte 0x00 24.--31. 1. " INTID195  ,Interrupt ID195  Priority/Priority Byte Offset 195 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID194  ,Interrupt ID194   Priority/Priority Byte Offset 194 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID193  ,Interrupt ID193  Priority/Priority Byte Offset 193 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID192  ,Interrupt ID192   Priority/Priority Byte Offset 192 "
group.long 0x4C4++0x03
line.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49"
hexmask.long.byte 0x00 24.--31. 1. " INTID199  ,Interrupt ID199  Priority/Priority Byte Offset 199 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID198  ,Interrupt ID198   Priority/Priority Byte Offset 198 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID197  ,Interrupt ID197  Priority/Priority Byte Offset 197 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID196  ,Interrupt ID196   Priority/Priority Byte Offset 196 "
group.long 0x4C8++0x03
line.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50"
hexmask.long.byte 0x00 24.--31. 1. " INTID203  ,Interrupt ID203  Priority/Priority Byte Offset 203 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID202  ,Interrupt ID202   Priority/Priority Byte Offset 202 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID201  ,Interrupt ID201  Priority/Priority Byte Offset 201 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID200  ,Interrupt ID200   Priority/Priority Byte Offset 200 "
group.long 0x4CC++0x03
line.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51"
hexmask.long.byte 0x00 24.--31. 1. " INTID207  ,Interrupt ID207  Priority/Priority Byte Offset 207 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID206  ,Interrupt ID206   Priority/Priority Byte Offset 206 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID205  ,Interrupt ID205  Priority/Priority Byte Offset 205 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID204  ,Interrupt ID204   Priority/Priority Byte Offset 204 "
group.long 0x4D0++0x03
line.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52"
hexmask.long.byte 0x00 24.--31. 1. " INTID211  ,Interrupt ID211  Priority/Priority Byte Offset 211 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID210  ,Interrupt ID210   Priority/Priority Byte Offset 210 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID209  ,Interrupt ID209  Priority/Priority Byte Offset 209 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID208  ,Interrupt ID208   Priority/Priority Byte Offset 208 "
group.long 0x4D4++0x03
line.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53"
hexmask.long.byte 0x00 24.--31. 1. " INTID215  ,Interrupt ID215  Priority/Priority Byte Offset 215 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID214  ,Interrupt ID214   Priority/Priority Byte Offset 214 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID213  ,Interrupt ID213  Priority/Priority Byte Offset 213 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID212  ,Interrupt ID212   Priority/Priority Byte Offset 212 "
group.long 0x4D8++0x03
line.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54"
hexmask.long.byte 0x00 24.--31. 1. " INTID219  ,Interrupt ID219  Priority/Priority Byte Offset 219 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID218  ,Interrupt ID218   Priority/Priority Byte Offset 218 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID217  ,Interrupt ID217  Priority/Priority Byte Offset 217 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID216  ,Interrupt ID216   Priority/Priority Byte Offset 216 "
group.long 0x4DC++0x03
line.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55"
hexmask.long.byte 0x00 24.--31. 1. " INTID223  ,Interrupt ID223  Priority/Priority Byte Offset 223 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID222  ,Interrupt ID222   Priority/Priority Byte Offset 222 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID221  ,Interrupt ID221  Priority/Priority Byte Offset 221 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID220  ,Interrupt ID220   Priority/Priority Byte Offset 220 "
else
hgroup.long 0x4C0++0x03
hide.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48"
hgroup.long 0x4C4++0x03
hide.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49"
hgroup.long 0x4C8++0x03
hide.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50"
hgroup.long 0x4CC++0x03
hide.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51"
hgroup.long 0x4D0++0x03
hide.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52"
hgroup.long 0x4D4++0x03
hide.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53"
hgroup.long 0x4D8++0x03
hide.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54"
hgroup.long 0x4DC++0x03
hide.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07)
group.long 0x4E0++0x03
line.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56"
hexmask.long.byte 0x00 24.--31. 1. " INTID227  ,Interrupt ID227  Priority/Priority Byte Offset 227 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID226  ,Interrupt ID226   Priority/Priority Byte Offset 226 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID225  ,Interrupt ID225  Priority/Priority Byte Offset 225 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID224  ,Interrupt ID224   Priority/Priority Byte Offset 224 "
group.long 0x4E4++0x03
line.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57"
hexmask.long.byte 0x00 24.--31. 1. " INTID231  ,Interrupt ID231  Priority/Priority Byte Offset 231 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID230  ,Interrupt ID230   Priority/Priority Byte Offset 230 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID229  ,Interrupt ID229  Priority/Priority Byte Offset 229 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID228  ,Interrupt ID228   Priority/Priority Byte Offset 228 "
group.long 0x4E8++0x03
line.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58"
hexmask.long.byte 0x00 24.--31. 1. " INTID235  ,Interrupt ID235  Priority/Priority Byte Offset 235 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID234  ,Interrupt ID234   Priority/Priority Byte Offset 234 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID233  ,Interrupt ID233  Priority/Priority Byte Offset 233 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID232  ,Interrupt ID232   Priority/Priority Byte Offset 232 "
group.long 0x4EC++0x03
line.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59"
hexmask.long.byte 0x00 24.--31. 1. " INTID239  ,Interrupt ID239  Priority/Priority Byte Offset 239 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID238  ,Interrupt ID238   Priority/Priority Byte Offset 238 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID237  ,Interrupt ID237  Priority/Priority Byte Offset 237 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID236  ,Interrupt ID236   Priority/Priority Byte Offset 236 "
group.long 0x4F0++0x03
line.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60"
hexmask.long.byte 0x00 24.--31. 1. " INTID243  ,Interrupt ID243  Priority/Priority Byte Offset 243 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID242  ,Interrupt ID242   Priority/Priority Byte Offset 242 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID241  ,Interrupt ID241  Priority/Priority Byte Offset 241 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID240  ,Interrupt ID240   Priority/Priority Byte Offset 240 "
group.long 0x4F4++0x03
line.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61"
hexmask.long.byte 0x00 24.--31. 1. " INTID247  ,Interrupt ID247  Priority/Priority Byte Offset 247 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID246  ,Interrupt ID246   Priority/Priority Byte Offset 246 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID245  ,Interrupt ID245  Priority/Priority Byte Offset 245 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID244  ,Interrupt ID244   Priority/Priority Byte Offset 244 "
group.long 0x4F8++0x03
line.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62"
hexmask.long.byte 0x00 24.--31. 1. " INTID251  ,Interrupt ID251  Priority/Priority Byte Offset 251 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID250  ,Interrupt ID250   Priority/Priority Byte Offset 250 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID249  ,Interrupt ID249  Priority/Priority Byte Offset 249 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID248  ,Interrupt ID248   Priority/Priority Byte Offset 248 "
group.long 0x4FC++0x03
line.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63"
hexmask.long.byte 0x00 24.--31. 1. " INTID255  ,Interrupt ID255  Priority/Priority Byte Offset 255 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID254  ,Interrupt ID254   Priority/Priority Byte Offset 254 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID253  ,Interrupt ID253  Priority/Priority Byte Offset 253 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID252  ,Interrupt ID252   Priority/Priority Byte Offset 252 "
else
hgroup.long 0x4E0++0x03
hide.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56"
hgroup.long 0x4E4++0x03
hide.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57"
hgroup.long 0x4E8++0x03
hide.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58"
hgroup.long 0x4EC++0x03
hide.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59"
hgroup.long 0x4F0++0x03
hide.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60"
hgroup.long 0x4F4++0x03
hide.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61"
hgroup.long 0x4F8++0x03
hide.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62"
hgroup.long 0x4FC++0x03
hide.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08)
group.long 0x500++0x03
line.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64"
hexmask.long.byte 0x00 24.--31. 1. " INTID259  ,Interrupt ID259  Priority/Priority Byte Offset 259 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID258  ,Interrupt ID258   Priority/Priority Byte Offset 258 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID257  ,Interrupt ID257  Priority/Priority Byte Offset 257 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID256  ,Interrupt ID256   Priority/Priority Byte Offset 256 "
group.long 0x504++0x03
line.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65"
hexmask.long.byte 0x00 24.--31. 1. " INTID263  ,Interrupt ID263  Priority/Priority Byte Offset 263 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID262  ,Interrupt ID262   Priority/Priority Byte Offset 262 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID261  ,Interrupt ID261  Priority/Priority Byte Offset 261 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID260  ,Interrupt ID260   Priority/Priority Byte Offset 260 "
group.long 0x508++0x03
line.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66"
hexmask.long.byte 0x00 24.--31. 1. " INTID267  ,Interrupt ID267  Priority/Priority Byte Offset 267 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID266  ,Interrupt ID266   Priority/Priority Byte Offset 266 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID265  ,Interrupt ID265  Priority/Priority Byte Offset 265 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID264  ,Interrupt ID264   Priority/Priority Byte Offset 264 "
group.long 0x50C++0x03
line.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67"
hexmask.long.byte 0x00 24.--31. 1. " INTID271  ,Interrupt ID271  Priority/Priority Byte Offset 271 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID270  ,Interrupt ID270   Priority/Priority Byte Offset 270 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID269  ,Interrupt ID269  Priority/Priority Byte Offset 269 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID268  ,Interrupt ID268   Priority/Priority Byte Offset 268 "
group.long 0x510++0x03
line.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68"
hexmask.long.byte 0x00 24.--31. 1. " INTID275  ,Interrupt ID275  Priority/Priority Byte Offset 275 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID274  ,Interrupt ID274   Priority/Priority Byte Offset 274 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID273  ,Interrupt ID273  Priority/Priority Byte Offset 273 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID272  ,Interrupt ID272   Priority/Priority Byte Offset 272 "
group.long 0x514++0x03
line.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69"
hexmask.long.byte 0x00 24.--31. 1. " INTID279  ,Interrupt ID279  Priority/Priority Byte Offset 279 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID278  ,Interrupt ID278   Priority/Priority Byte Offset 278 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID277  ,Interrupt ID277  Priority/Priority Byte Offset 277 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID276  ,Interrupt ID276   Priority/Priority Byte Offset 276 "
group.long 0x518++0x03
line.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70"
hexmask.long.byte 0x00 24.--31. 1. " INTID283  ,Interrupt ID283  Priority/Priority Byte Offset 283 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID282  ,Interrupt ID282   Priority/Priority Byte Offset 282 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID281  ,Interrupt ID281  Priority/Priority Byte Offset 281 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID280  ,Interrupt ID280   Priority/Priority Byte Offset 280 "
group.long 0x51C++0x03
line.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71"
hexmask.long.byte 0x00 24.--31. 1. " INTID287  ,Interrupt ID287  Priority/Priority Byte Offset 287 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID286  ,Interrupt ID286   Priority/Priority Byte Offset 286 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID285  ,Interrupt ID285  Priority/Priority Byte Offset 285 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID284  ,Interrupt ID284   Priority/Priority Byte Offset 284 "
else
hgroup.long 0x500++0x03
hide.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64"
hgroup.long 0x504++0x03
hide.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65"
hgroup.long 0x508++0x03
hide.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66"
hgroup.long 0x50C++0x03
hide.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67"
hgroup.long 0x510++0x03
hide.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68"
hgroup.long 0x514++0x03
hide.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69"
hgroup.long 0x518++0x03
hide.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70"
hgroup.long 0x51C++0x03
hide.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09)
group.long 0x520++0x03
line.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72"
hexmask.long.byte 0x00 24.--31. 1. " INTID291  ,Interrupt ID291  Priority/Priority Byte Offset 291 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID290  ,Interrupt ID290   Priority/Priority Byte Offset 290 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID289  ,Interrupt ID289  Priority/Priority Byte Offset 289 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID288  ,Interrupt ID288   Priority/Priority Byte Offset 288 "
group.long 0x524++0x03
line.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73"
hexmask.long.byte 0x00 24.--31. 1. " INTID295  ,Interrupt ID295  Priority/Priority Byte Offset 295 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID294  ,Interrupt ID294   Priority/Priority Byte Offset 294 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID293  ,Interrupt ID293  Priority/Priority Byte Offset 293 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID292  ,Interrupt ID292   Priority/Priority Byte Offset 292 "
group.long 0x528++0x03
line.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74"
hexmask.long.byte 0x00 24.--31. 1. " INTID299  ,Interrupt ID299  Priority/Priority Byte Offset 299 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID298  ,Interrupt ID298   Priority/Priority Byte Offset 298 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID297  ,Interrupt ID297  Priority/Priority Byte Offset 297 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID296  ,Interrupt ID296   Priority/Priority Byte Offset 296 "
group.long 0x52C++0x03
line.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75"
hexmask.long.byte 0x00 24.--31. 1. " INTID303  ,Interrupt ID303  Priority/Priority Byte Offset 303 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID302  ,Interrupt ID302   Priority/Priority Byte Offset 302 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID301  ,Interrupt ID301  Priority/Priority Byte Offset 301 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID300  ,Interrupt ID300   Priority/Priority Byte Offset 300 "
group.long 0x530++0x03
line.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76"
hexmask.long.byte 0x00 24.--31. 1. " INTID307  ,Interrupt ID307  Priority/Priority Byte Offset 307 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID306  ,Interrupt ID306   Priority/Priority Byte Offset 306 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID305  ,Interrupt ID305  Priority/Priority Byte Offset 305 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID304  ,Interrupt ID304   Priority/Priority Byte Offset 304 "
group.long 0x534++0x03
line.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77"
hexmask.long.byte 0x00 24.--31. 1. " INTID311  ,Interrupt ID311  Priority/Priority Byte Offset 311 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID310  ,Interrupt ID310   Priority/Priority Byte Offset 310 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID309  ,Interrupt ID309  Priority/Priority Byte Offset 309 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID308  ,Interrupt ID308   Priority/Priority Byte Offset 308 "
group.long 0x538++0x03
line.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78"
hexmask.long.byte 0x00 24.--31. 1. " INTID315  ,Interrupt ID315  Priority/Priority Byte Offset 315 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID314  ,Interrupt ID314   Priority/Priority Byte Offset 314 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID313  ,Interrupt ID313  Priority/Priority Byte Offset 313 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID312  ,Interrupt ID312   Priority/Priority Byte Offset 312 "
group.long 0x53C++0x03
line.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79"
hexmask.long.byte 0x00 24.--31. 1. " INTID319  ,Interrupt ID319  Priority/Priority Byte Offset 319 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID318  ,Interrupt ID318   Priority/Priority Byte Offset 318 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID317  ,Interrupt ID317  Priority/Priority Byte Offset 317 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID316  ,Interrupt ID316   Priority/Priority Byte Offset 316 "
else
hgroup.long 0x520++0x03
hide.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72"
hgroup.long 0x524++0x03
hide.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73"
hgroup.long 0x528++0x03
hide.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74"
hgroup.long 0x52C++0x03
hide.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75"
hgroup.long 0x530++0x03
hide.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76"
hgroup.long 0x534++0x03
hide.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77"
hgroup.long 0x538++0x03
hide.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78"
hgroup.long 0x53C++0x03
hide.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A)
group.long 0x540++0x03
line.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80"
hexmask.long.byte 0x00 24.--31. 1. " INTID323  ,Interrupt ID323  Priority/Priority Byte Offset 323 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID322  ,Interrupt ID322   Priority/Priority Byte Offset 322 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID321  ,Interrupt ID321  Priority/Priority Byte Offset 321 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID320  ,Interrupt ID320   Priority/Priority Byte Offset 320 "
group.long 0x544++0x03
line.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81"
hexmask.long.byte 0x00 24.--31. 1. " INTID327  ,Interrupt ID327  Priority/Priority Byte Offset 327 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID326  ,Interrupt ID326   Priority/Priority Byte Offset 326 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID325  ,Interrupt ID325  Priority/Priority Byte Offset 325 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID324  ,Interrupt ID324   Priority/Priority Byte Offset 324 "
group.long 0x548++0x03
line.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82"
hexmask.long.byte 0x00 24.--31. 1. " INTID331  ,Interrupt ID331  Priority/Priority Byte Offset 331 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID330  ,Interrupt ID330   Priority/Priority Byte Offset 330 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID329  ,Interrupt ID329  Priority/Priority Byte Offset 329 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID328  ,Interrupt ID328   Priority/Priority Byte Offset 328 "
group.long 0x54C++0x03
line.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83"
hexmask.long.byte 0x00 24.--31. 1. " INTID335  ,Interrupt ID335  Priority/Priority Byte Offset 335 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID334  ,Interrupt ID334   Priority/Priority Byte Offset 334 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID333  ,Interrupt ID333  Priority/Priority Byte Offset 333 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID332  ,Interrupt ID332   Priority/Priority Byte Offset 332 "
group.long 0x550++0x03
line.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84"
hexmask.long.byte 0x00 24.--31. 1. " INTID339  ,Interrupt ID339  Priority/Priority Byte Offset 339 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID338  ,Interrupt ID338   Priority/Priority Byte Offset 338 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID337  ,Interrupt ID337  Priority/Priority Byte Offset 337 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID336  ,Interrupt ID336   Priority/Priority Byte Offset 336 "
group.long 0x554++0x03
line.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85"
hexmask.long.byte 0x00 24.--31. 1. " INTID343  ,Interrupt ID343  Priority/Priority Byte Offset 343 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID342  ,Interrupt ID342   Priority/Priority Byte Offset 342 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID341  ,Interrupt ID341  Priority/Priority Byte Offset 341 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID340  ,Interrupt ID340   Priority/Priority Byte Offset 340 "
group.long 0x558++0x03
line.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86"
hexmask.long.byte 0x00 24.--31. 1. " INTID347  ,Interrupt ID347  Priority/Priority Byte Offset 347 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID346  ,Interrupt ID346   Priority/Priority Byte Offset 346 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID345  ,Interrupt ID345  Priority/Priority Byte Offset 345 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID344  ,Interrupt ID344   Priority/Priority Byte Offset 344 "
group.long 0x55C++0x03
line.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87"
hexmask.long.byte 0x00 24.--31. 1. " INTID351  ,Interrupt ID351  Priority/Priority Byte Offset 351 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID350  ,Interrupt ID350   Priority/Priority Byte Offset 350 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID349  ,Interrupt ID349  Priority/Priority Byte Offset 349 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID348  ,Interrupt ID348   Priority/Priority Byte Offset 348 "
else
hgroup.long 0x540++0x03
hide.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80"
hgroup.long 0x544++0x03
hide.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81"
hgroup.long 0x548++0x03
hide.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82"
hgroup.long 0x54C++0x03
hide.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83"
hgroup.long 0x550++0x03
hide.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84"
hgroup.long 0x554++0x03
hide.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85"
hgroup.long 0x558++0x03
hide.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86"
hgroup.long 0x55C++0x03
hide.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B)
group.long 0x560++0x03
line.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88"
hexmask.long.byte 0x00 24.--31. 1. " INTID355  ,Interrupt ID355  Priority/Priority Byte Offset 355 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID354  ,Interrupt ID354   Priority/Priority Byte Offset 354 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID353  ,Interrupt ID353  Priority/Priority Byte Offset 353 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID352  ,Interrupt ID352   Priority/Priority Byte Offset 352 "
group.long 0x564++0x03
line.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89"
hexmask.long.byte 0x00 24.--31. 1. " INTID359  ,Interrupt ID359  Priority/Priority Byte Offset 359 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID358  ,Interrupt ID358   Priority/Priority Byte Offset 358 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID357  ,Interrupt ID357  Priority/Priority Byte Offset 357 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID356  ,Interrupt ID356   Priority/Priority Byte Offset 356 "
group.long 0x568++0x03
line.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90"
hexmask.long.byte 0x00 24.--31. 1. " INTID363  ,Interrupt ID363  Priority/Priority Byte Offset 363 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID362  ,Interrupt ID362   Priority/Priority Byte Offset 362 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID361  ,Interrupt ID361  Priority/Priority Byte Offset 361 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID360  ,Interrupt ID360   Priority/Priority Byte Offset 360 "
group.long 0x56C++0x03
line.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91"
hexmask.long.byte 0x00 24.--31. 1. " INTID367  ,Interrupt ID367  Priority/Priority Byte Offset 367 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID366  ,Interrupt ID366   Priority/Priority Byte Offset 366 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID365  ,Interrupt ID365  Priority/Priority Byte Offset 365 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID364  ,Interrupt ID364   Priority/Priority Byte Offset 364 "
group.long 0x570++0x03
line.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92"
hexmask.long.byte 0x00 24.--31. 1. " INTID371  ,Interrupt ID371  Priority/Priority Byte Offset 371 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID370  ,Interrupt ID370   Priority/Priority Byte Offset 370 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID369  ,Interrupt ID369  Priority/Priority Byte Offset 369 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID368  ,Interrupt ID368   Priority/Priority Byte Offset 368 "
group.long 0x574++0x03
line.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93"
hexmask.long.byte 0x00 24.--31. 1. " INTID375  ,Interrupt ID375  Priority/Priority Byte Offset 375 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID374  ,Interrupt ID374   Priority/Priority Byte Offset 374 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID373  ,Interrupt ID373  Priority/Priority Byte Offset 373 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID372  ,Interrupt ID372   Priority/Priority Byte Offset 372 "
group.long 0x578++0x03
line.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94"
hexmask.long.byte 0x00 24.--31. 1. " INTID379  ,Interrupt ID379  Priority/Priority Byte Offset 379 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID378  ,Interrupt ID378   Priority/Priority Byte Offset 378 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID377  ,Interrupt ID377  Priority/Priority Byte Offset 377 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID376  ,Interrupt ID376   Priority/Priority Byte Offset 376 "
group.long 0x57C++0x03
line.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95"
hexmask.long.byte 0x00 24.--31. 1. " INTID383  ,Interrupt ID383  Priority/Priority Byte Offset 383 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID382  ,Interrupt ID382   Priority/Priority Byte Offset 382 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID381  ,Interrupt ID381  Priority/Priority Byte Offset 381 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID380  ,Interrupt ID380   Priority/Priority Byte Offset 380 "
else
hgroup.long 0x560++0x03
hide.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88"
hgroup.long 0x564++0x03
hide.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89"
hgroup.long 0x568++0x03
hide.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90"
hgroup.long 0x56C++0x03
hide.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91"
hgroup.long 0x570++0x03
hide.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92"
hgroup.long 0x574++0x03
hide.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93"
hgroup.long 0x578++0x03
hide.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94"
hgroup.long 0x57C++0x03
hide.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C)
group.long 0x580++0x03
line.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96"
hexmask.long.byte 0x00 24.--31. 1. " INTID387  ,Interrupt ID387  Priority/Priority Byte Offset 387 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID386  ,Interrupt ID386   Priority/Priority Byte Offset 386 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID385  ,Interrupt ID385  Priority/Priority Byte Offset 385 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID384  ,Interrupt ID384   Priority/Priority Byte Offset 384 "
group.long 0x584++0x03
line.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97"
hexmask.long.byte 0x00 24.--31. 1. " INTID391  ,Interrupt ID391  Priority/Priority Byte Offset 391 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID390  ,Interrupt ID390   Priority/Priority Byte Offset 390 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID389  ,Interrupt ID389  Priority/Priority Byte Offset 389 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID388  ,Interrupt ID388   Priority/Priority Byte Offset 388 "
group.long 0x588++0x03
line.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98"
hexmask.long.byte 0x00 24.--31. 1. " INTID395  ,Interrupt ID395  Priority/Priority Byte Offset 395 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID394  ,Interrupt ID394   Priority/Priority Byte Offset 394 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID393  ,Interrupt ID393  Priority/Priority Byte Offset 393 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID392  ,Interrupt ID392   Priority/Priority Byte Offset 392 "
group.long 0x58C++0x03
line.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99"
hexmask.long.byte 0x00 24.--31. 1. " INTID399  ,Interrupt ID399  Priority/Priority Byte Offset 399 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID398  ,Interrupt ID398   Priority/Priority Byte Offset 398 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID397  ,Interrupt ID397  Priority/Priority Byte Offset 397 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID396  ,Interrupt ID396   Priority/Priority Byte Offset 396 "
group.long 0x590++0x03
line.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100"
hexmask.long.byte 0x00 24.--31. 1. " INTID403  ,Interrupt ID403  Priority/Priority Byte Offset 403 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID402  ,Interrupt ID402   Priority/Priority Byte Offset 402 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID401  ,Interrupt ID401  Priority/Priority Byte Offset 401 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID400  ,Interrupt ID400   Priority/Priority Byte Offset 400 "
group.long 0x594++0x03
line.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101"
hexmask.long.byte 0x00 24.--31. 1. " INTID407  ,Interrupt ID407  Priority/Priority Byte Offset 407 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID406  ,Interrupt ID406   Priority/Priority Byte Offset 406 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID405  ,Interrupt ID405  Priority/Priority Byte Offset 405 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID404  ,Interrupt ID404   Priority/Priority Byte Offset 404 "
group.long 0x598++0x03
line.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102"
hexmask.long.byte 0x00 24.--31. 1. " INTID411  ,Interrupt ID411  Priority/Priority Byte Offset 411 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID410  ,Interrupt ID410   Priority/Priority Byte Offset 410 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID409  ,Interrupt ID409  Priority/Priority Byte Offset 409 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID408  ,Interrupt ID408   Priority/Priority Byte Offset 408 "
group.long 0x59C++0x03
line.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103"
hexmask.long.byte 0x00 24.--31. 1. " INTID415  ,Interrupt ID415  Priority/Priority Byte Offset 415 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID414  ,Interrupt ID414   Priority/Priority Byte Offset 414 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID413  ,Interrupt ID413  Priority/Priority Byte Offset 413 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID412  ,Interrupt ID412   Priority/Priority Byte Offset 412 "
else
hgroup.long 0x580++0x03
hide.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96"
hgroup.long 0x584++0x03
hide.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97"
hgroup.long 0x588++0x03
hide.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98"
hgroup.long 0x58C++0x03
hide.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99"
hgroup.long 0x590++0x03
hide.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100"
hgroup.long 0x594++0x03
hide.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101"
hgroup.long 0x598++0x03
hide.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102"
hgroup.long 0x59C++0x03
hide.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D)
group.long 0x5A0++0x03
line.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104"
hexmask.long.byte 0x00 24.--31. 1. " INTID419  ,Interrupt ID419  Priority/Priority Byte Offset 419 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID418  ,Interrupt ID418   Priority/Priority Byte Offset 418 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID417  ,Interrupt ID417  Priority/Priority Byte Offset 417 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID416  ,Interrupt ID416   Priority/Priority Byte Offset 416 "
group.long 0x5A4++0x03
line.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105"
hexmask.long.byte 0x00 24.--31. 1. " INTID423  ,Interrupt ID423  Priority/Priority Byte Offset 423 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID422  ,Interrupt ID422   Priority/Priority Byte Offset 422 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID421  ,Interrupt ID421  Priority/Priority Byte Offset 421 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID420  ,Interrupt ID420   Priority/Priority Byte Offset 420 "
group.long 0x5A8++0x03
line.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106"
hexmask.long.byte 0x00 24.--31. 1. " INTID427  ,Interrupt ID427  Priority/Priority Byte Offset 427 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID426  ,Interrupt ID426   Priority/Priority Byte Offset 426 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID425  ,Interrupt ID425  Priority/Priority Byte Offset 425 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID424  ,Interrupt ID424   Priority/Priority Byte Offset 424 "
group.long 0x5AC++0x03
line.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107"
hexmask.long.byte 0x00 24.--31. 1. " INTID431  ,Interrupt ID431  Priority/Priority Byte Offset 431 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID430  ,Interrupt ID430   Priority/Priority Byte Offset 430 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID429  ,Interrupt ID429  Priority/Priority Byte Offset 429 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID428  ,Interrupt ID428   Priority/Priority Byte Offset 428 "
group.long 0x5B0++0x03
line.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108"
hexmask.long.byte 0x00 24.--31. 1. " INTID435  ,Interrupt ID435  Priority/Priority Byte Offset 435 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID434  ,Interrupt ID434   Priority/Priority Byte Offset 434 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID433  ,Interrupt ID433  Priority/Priority Byte Offset 433 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID432  ,Interrupt ID432   Priority/Priority Byte Offset 432 "
group.long 0x5B4++0x03
line.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109"
hexmask.long.byte 0x00 24.--31. 1. " INTID439  ,Interrupt ID439  Priority/Priority Byte Offset 439 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID438  ,Interrupt ID438   Priority/Priority Byte Offset 438 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID437  ,Interrupt ID437  Priority/Priority Byte Offset 437 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID436  ,Interrupt ID436   Priority/Priority Byte Offset 436 "
group.long 0x5B8++0x03
line.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110"
hexmask.long.byte 0x00 24.--31. 1. " INTID443  ,Interrupt ID443  Priority/Priority Byte Offset 443 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID442  ,Interrupt ID442   Priority/Priority Byte Offset 442 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID441  ,Interrupt ID441  Priority/Priority Byte Offset 441 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID440  ,Interrupt ID440   Priority/Priority Byte Offset 440 "
group.long 0x5BC++0x03
line.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111"
hexmask.long.byte 0x00 24.--31. 1. " INTID447  ,Interrupt ID447  Priority/Priority Byte Offset 447 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID446  ,Interrupt ID446   Priority/Priority Byte Offset 446 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID445  ,Interrupt ID445  Priority/Priority Byte Offset 445 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID444  ,Interrupt ID444   Priority/Priority Byte Offset 444 "
else
hgroup.long 0x5A0++0x03
hide.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104"
hgroup.long 0x5A4++0x03
hide.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105"
hgroup.long 0x5A8++0x03
hide.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106"
hgroup.long 0x5AC++0x03
hide.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107"
hgroup.long 0x5B0++0x03
hide.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108"
hgroup.long 0x5B4++0x03
hide.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109"
hgroup.long 0x5B8++0x03
hide.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110"
hgroup.long 0x5BC++0x03
hide.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E)
group.long 0x5C0++0x03
line.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112"
hexmask.long.byte 0x00 24.--31. 1. " INTID451  ,Interrupt ID451  Priority/Priority Byte Offset 451 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID450  ,Interrupt ID450   Priority/Priority Byte Offset 450 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID449  ,Interrupt ID449  Priority/Priority Byte Offset 449 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID448  ,Interrupt ID448   Priority/Priority Byte Offset 448 "
group.long 0x5C4++0x03
line.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113"
hexmask.long.byte 0x00 24.--31. 1. " INTID455  ,Interrupt ID455  Priority/Priority Byte Offset 455 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID454  ,Interrupt ID454   Priority/Priority Byte Offset 454 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID453  ,Interrupt ID453  Priority/Priority Byte Offset 453 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID452  ,Interrupt ID452   Priority/Priority Byte Offset 452 "
group.long 0x5C8++0x03
line.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114"
hexmask.long.byte 0x00 24.--31. 1. " INTID459  ,Interrupt ID459  Priority/Priority Byte Offset 459 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID458  ,Interrupt ID458   Priority/Priority Byte Offset 458 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID457  ,Interrupt ID457  Priority/Priority Byte Offset 457 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID456  ,Interrupt ID456   Priority/Priority Byte Offset 456 "
group.long 0x5CC++0x03
line.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115"
hexmask.long.byte 0x00 24.--31. 1. " INTID463  ,Interrupt ID463  Priority/Priority Byte Offset 463 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID462  ,Interrupt ID462   Priority/Priority Byte Offset 462 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID461  ,Interrupt ID461  Priority/Priority Byte Offset 461 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID460  ,Interrupt ID460   Priority/Priority Byte Offset 460 "
group.long 0x5D0++0x03
line.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116"
hexmask.long.byte 0x00 24.--31. 1. " INTID467  ,Interrupt ID467  Priority/Priority Byte Offset 467 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID466  ,Interrupt ID466   Priority/Priority Byte Offset 466 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID465  ,Interrupt ID465  Priority/Priority Byte Offset 465 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID464  ,Interrupt ID464   Priority/Priority Byte Offset 464 "
group.long 0x5D4++0x03
line.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117"
hexmask.long.byte 0x00 24.--31. 1. " INTID471  ,Interrupt ID471  Priority/Priority Byte Offset 471 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID470  ,Interrupt ID470   Priority/Priority Byte Offset 470 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID469  ,Interrupt ID469  Priority/Priority Byte Offset 469 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID468  ,Interrupt ID468   Priority/Priority Byte Offset 468 "
group.long 0x5D8++0x03
line.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118"
hexmask.long.byte 0x00 24.--31. 1. " INTID475  ,Interrupt ID475  Priority/Priority Byte Offset 475 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID474  ,Interrupt ID474   Priority/Priority Byte Offset 474 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID473  ,Interrupt ID473  Priority/Priority Byte Offset 473 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID472  ,Interrupt ID472   Priority/Priority Byte Offset 472 "
group.long 0x5DC++0x03
line.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119"
hexmask.long.byte 0x00 24.--31. 1. " INTID479  ,Interrupt ID479  Priority/Priority Byte Offset 479 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID478  ,Interrupt ID478   Priority/Priority Byte Offset 478 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID477  ,Interrupt ID477  Priority/Priority Byte Offset 477 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID476  ,Interrupt ID476   Priority/Priority Byte Offset 476 "
else
hgroup.long 0x5C0++0x03
hide.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112"
hgroup.long 0x5C4++0x03
hide.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113"
hgroup.long 0x5C8++0x03
hide.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114"
hgroup.long 0x5CC++0x03
hide.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115"
hgroup.long 0x5D0++0x03
hide.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116"
hgroup.long 0x5D4++0x03
hide.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117"
hgroup.long 0x5D8++0x03
hide.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118"
hgroup.long 0x5DC++0x03
hide.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F)
group.long 0x5E0++0x03
line.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120"
hexmask.long.byte 0x00 24.--31. 1. " INTID483  ,Interrupt ID483  Priority/Priority Byte Offset 483 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID482  ,Interrupt ID482   Priority/Priority Byte Offset 482 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID481  ,Interrupt ID481  Priority/Priority Byte Offset 481 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID480  ,Interrupt ID480   Priority/Priority Byte Offset 480 "
group.long 0x5E4++0x03
line.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121"
hexmask.long.byte 0x00 24.--31. 1. " INTID487  ,Interrupt ID487  Priority/Priority Byte Offset 487 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID486  ,Interrupt ID486   Priority/Priority Byte Offset 486 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID485  ,Interrupt ID485  Priority/Priority Byte Offset 485 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID484  ,Interrupt ID484   Priority/Priority Byte Offset 484 "
group.long 0x5E8++0x03
line.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122"
hexmask.long.byte 0x00 24.--31. 1. " INTID491  ,Interrupt ID491  Priority/Priority Byte Offset 491 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID490  ,Interrupt ID490   Priority/Priority Byte Offset 490 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID489  ,Interrupt ID489  Priority/Priority Byte Offset 489 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID488  ,Interrupt ID488   Priority/Priority Byte Offset 488 "
group.long 0x5EC++0x03
line.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123"
hexmask.long.byte 0x00 24.--31. 1. " INTID495  ,Interrupt ID495  Priority/Priority Byte Offset 495 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID494  ,Interrupt ID494   Priority/Priority Byte Offset 494 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID493  ,Interrupt ID493  Priority/Priority Byte Offset 493 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID492  ,Interrupt ID492   Priority/Priority Byte Offset 492 "
group.long 0x5F0++0x03
line.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124"
hexmask.long.byte 0x00 24.--31. 1. " INTID499  ,Interrupt ID499  Priority/Priority Byte Offset 499 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID498  ,Interrupt ID498   Priority/Priority Byte Offset 498 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID497  ,Interrupt ID497  Priority/Priority Byte Offset 497 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID496  ,Interrupt ID496   Priority/Priority Byte Offset 496 "
group.long 0x5F4++0x03
line.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125"
hexmask.long.byte 0x00 24.--31. 1. " INTID503  ,Interrupt ID503  Priority/Priority Byte Offset 503 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID502  ,Interrupt ID502   Priority/Priority Byte Offset 502 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID501  ,Interrupt ID501  Priority/Priority Byte Offset 501 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID500  ,Interrupt ID500   Priority/Priority Byte Offset 500 "
group.long 0x5F8++0x03
line.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126"
hexmask.long.byte 0x00 24.--31. 1. " INTID507  ,Interrupt ID507  Priority/Priority Byte Offset 507 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID506  ,Interrupt ID506   Priority/Priority Byte Offset 506 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID505  ,Interrupt ID505  Priority/Priority Byte Offset 505 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID504  ,Interrupt ID504   Priority/Priority Byte Offset 504 "
group.long 0x5FC++0x03
line.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127"
hexmask.long.byte 0x00 24.--31. 1. " INTID511  ,Interrupt ID511  Priority/Priority Byte Offset 511 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID510  ,Interrupt ID510   Priority/Priority Byte Offset 510 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID509  ,Interrupt ID509  Priority/Priority Byte Offset 509 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID508  ,Interrupt ID508   Priority/Priority Byte Offset 508 "
else
hgroup.long 0x5E0++0x03
hide.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120"
hgroup.long 0x5E4++0x03
hide.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121"
hgroup.long 0x5E8++0x03
hide.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122"
hgroup.long 0x5EC++0x03
hide.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123"
hgroup.long 0x5F0++0x03
hide.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124"
hgroup.long 0x5F4++0x03
hide.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125"
hgroup.long 0x5F8++0x03
hide.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126"
hgroup.long 0x5FC++0x03
hide.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)
group.long 0x600++0x03
line.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128"
hexmask.long.byte 0x00 24.--31. 1. " INTID515  ,Interrupt ID515  Priority/Priority Byte Offset 515 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID514  ,Interrupt ID514   Priority/Priority Byte Offset 514 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID513  ,Interrupt ID513  Priority/Priority Byte Offset 513 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID512  ,Interrupt ID512   Priority/Priority Byte Offset 512 "
group.long 0x604++0x03
line.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129"
hexmask.long.byte 0x00 24.--31. 1. " INTID519  ,Interrupt ID519  Priority/Priority Byte Offset 519 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID518  ,Interrupt ID518   Priority/Priority Byte Offset 518 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID517  ,Interrupt ID517  Priority/Priority Byte Offset 517 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID516  ,Interrupt ID516   Priority/Priority Byte Offset 516 "
group.long 0x608++0x03
line.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130"
hexmask.long.byte 0x00 24.--31. 1. " INTID523  ,Interrupt ID523  Priority/Priority Byte Offset 523 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID522  ,Interrupt ID522   Priority/Priority Byte Offset 522 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID521  ,Interrupt ID521  Priority/Priority Byte Offset 521 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID520  ,Interrupt ID520   Priority/Priority Byte Offset 520 "
group.long 0x60C++0x03
line.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131"
hexmask.long.byte 0x00 24.--31. 1. " INTID527  ,Interrupt ID527  Priority/Priority Byte Offset 527 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID526  ,Interrupt ID526   Priority/Priority Byte Offset 526 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID525  ,Interrupt ID525  Priority/Priority Byte Offset 525 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID524  ,Interrupt ID524   Priority/Priority Byte Offset 524 "
group.long 0x610++0x03
line.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132"
hexmask.long.byte 0x00 24.--31. 1. " INTID531  ,Interrupt ID531  Priority/Priority Byte Offset 531 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID530  ,Interrupt ID530   Priority/Priority Byte Offset 530 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID529  ,Interrupt ID529  Priority/Priority Byte Offset 529 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID528  ,Interrupt ID528   Priority/Priority Byte Offset 528 "
group.long 0x614++0x03
line.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133"
hexmask.long.byte 0x00 24.--31. 1. " INTID535  ,Interrupt ID535  Priority/Priority Byte Offset 535 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID534  ,Interrupt ID534   Priority/Priority Byte Offset 534 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID533  ,Interrupt ID533  Priority/Priority Byte Offset 533 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID532  ,Interrupt ID532   Priority/Priority Byte Offset 532 "
group.long 0x618++0x03
line.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134"
hexmask.long.byte 0x00 24.--31. 1. " INTID539  ,Interrupt ID539  Priority/Priority Byte Offset 539 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID538  ,Interrupt ID538   Priority/Priority Byte Offset 538 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID537  ,Interrupt ID537  Priority/Priority Byte Offset 537 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID536  ,Interrupt ID536   Priority/Priority Byte Offset 536 "
group.long 0x61C++0x03
line.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135"
hexmask.long.byte 0x00 24.--31. 1. " INTID543  ,Interrupt ID543  Priority/Priority Byte Offset 543 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID542  ,Interrupt ID542   Priority/Priority Byte Offset 542 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID541  ,Interrupt ID541  Priority/Priority Byte Offset 541 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID540  ,Interrupt ID540   Priority/Priority Byte Offset 540 "
else
hgroup.long 0x600++0x03
hide.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128"
hgroup.long 0x604++0x03
hide.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129"
hgroup.long 0x608++0x03
hide.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130"
hgroup.long 0x60C++0x03
hide.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131"
hgroup.long 0x610++0x03
hide.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132"
hgroup.long 0x614++0x03
hide.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133"
hgroup.long 0x618++0x03
hide.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134"
hgroup.long 0x61C++0x03
hide.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)
group.long 0x620++0x03
line.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136"
hexmask.long.byte 0x00 24.--31. 1. " INTID547  ,Interrupt ID547  Priority/Priority Byte Offset 547 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID546  ,Interrupt ID546   Priority/Priority Byte Offset 546 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID545  ,Interrupt ID545  Priority/Priority Byte Offset 545 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID544  ,Interrupt ID544   Priority/Priority Byte Offset 544 "
group.long 0x624++0x03
line.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137"
hexmask.long.byte 0x00 24.--31. 1. " INTID551  ,Interrupt ID551  Priority/Priority Byte Offset 551 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID550  ,Interrupt ID550   Priority/Priority Byte Offset 550 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID549  ,Interrupt ID549  Priority/Priority Byte Offset 549 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID548  ,Interrupt ID548   Priority/Priority Byte Offset 548 "
group.long 0x628++0x03
line.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138"
hexmask.long.byte 0x00 24.--31. 1. " INTID555  ,Interrupt ID555  Priority/Priority Byte Offset 555 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID554  ,Interrupt ID554   Priority/Priority Byte Offset 554 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID553  ,Interrupt ID553  Priority/Priority Byte Offset 553 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID552  ,Interrupt ID552   Priority/Priority Byte Offset 552 "
group.long 0x62C++0x03
line.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139"
hexmask.long.byte 0x00 24.--31. 1. " INTID559  ,Interrupt ID559  Priority/Priority Byte Offset 559 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID558  ,Interrupt ID558   Priority/Priority Byte Offset 558 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID557  ,Interrupt ID557  Priority/Priority Byte Offset 557 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID556  ,Interrupt ID556   Priority/Priority Byte Offset 556 "
group.long 0x630++0x03
line.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140"
hexmask.long.byte 0x00 24.--31. 1. " INTID563  ,Interrupt ID563  Priority/Priority Byte Offset 563 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID562  ,Interrupt ID562   Priority/Priority Byte Offset 562 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID561  ,Interrupt ID561  Priority/Priority Byte Offset 561 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID560  ,Interrupt ID560   Priority/Priority Byte Offset 560 "
group.long 0x634++0x03
line.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141"
hexmask.long.byte 0x00 24.--31. 1. " INTID567  ,Interrupt ID567  Priority/Priority Byte Offset 567 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID566  ,Interrupt ID566   Priority/Priority Byte Offset 566 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID565  ,Interrupt ID565  Priority/Priority Byte Offset 565 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID564  ,Interrupt ID564   Priority/Priority Byte Offset 564 "
group.long 0x638++0x03
line.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142"
hexmask.long.byte 0x00 24.--31. 1. " INTID571  ,Interrupt ID571  Priority/Priority Byte Offset 571 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID570  ,Interrupt ID570   Priority/Priority Byte Offset 570 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID569  ,Interrupt ID569  Priority/Priority Byte Offset 569 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID568  ,Interrupt ID568   Priority/Priority Byte Offset 568 "
group.long 0x63C++0x03
line.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143"
hexmask.long.byte 0x00 24.--31. 1. " INTID575  ,Interrupt ID575  Priority/Priority Byte Offset 575 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID574  ,Interrupt ID574   Priority/Priority Byte Offset 574 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID573  ,Interrupt ID573  Priority/Priority Byte Offset 573 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID572  ,Interrupt ID572   Priority/Priority Byte Offset 572 "
else
hgroup.long 0x620++0x03
hide.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136"
hgroup.long 0x624++0x03
hide.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137"
hgroup.long 0x628++0x03
hide.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138"
hgroup.long 0x62C++0x03
hide.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139"
hgroup.long 0x630++0x03
hide.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140"
hgroup.long 0x634++0x03
hide.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141"
hgroup.long 0x638++0x03
hide.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142"
hgroup.long 0x63C++0x03
hide.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)
group.long 0x640++0x03
line.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144"
hexmask.long.byte 0x00 24.--31. 1. " INTID579  ,Interrupt ID579  Priority/Priority Byte Offset 579 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID578  ,Interrupt ID578   Priority/Priority Byte Offset 578 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID577  ,Interrupt ID577  Priority/Priority Byte Offset 577 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID576  ,Interrupt ID576   Priority/Priority Byte Offset 576 "
group.long 0x644++0x03
line.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145"
hexmask.long.byte 0x00 24.--31. 1. " INTID583  ,Interrupt ID583  Priority/Priority Byte Offset 583 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID582  ,Interrupt ID582   Priority/Priority Byte Offset 582 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID581  ,Interrupt ID581  Priority/Priority Byte Offset 581 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID580  ,Interrupt ID580   Priority/Priority Byte Offset 580 "
group.long 0x648++0x03
line.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146"
hexmask.long.byte 0x00 24.--31. 1. " INTID587  ,Interrupt ID587  Priority/Priority Byte Offset 587 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID586  ,Interrupt ID586   Priority/Priority Byte Offset 586 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID585  ,Interrupt ID585  Priority/Priority Byte Offset 585 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID584  ,Interrupt ID584   Priority/Priority Byte Offset 584 "
group.long 0x64C++0x03
line.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147"
hexmask.long.byte 0x00 24.--31. 1. " INTID591  ,Interrupt ID591  Priority/Priority Byte Offset 591 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID590  ,Interrupt ID590   Priority/Priority Byte Offset 590 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID589  ,Interrupt ID589  Priority/Priority Byte Offset 589 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID588  ,Interrupt ID588   Priority/Priority Byte Offset 588 "
group.long 0x650++0x03
line.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148"
hexmask.long.byte 0x00 24.--31. 1. " INTID595  ,Interrupt ID595  Priority/Priority Byte Offset 595 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID594  ,Interrupt ID594   Priority/Priority Byte Offset 594 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID593  ,Interrupt ID593  Priority/Priority Byte Offset 593 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID592  ,Interrupt ID592   Priority/Priority Byte Offset 592 "
group.long 0x654++0x03
line.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149"
hexmask.long.byte 0x00 24.--31. 1. " INTID599  ,Interrupt ID599  Priority/Priority Byte Offset 599 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID598  ,Interrupt ID598   Priority/Priority Byte Offset 598 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID597  ,Interrupt ID597  Priority/Priority Byte Offset 597 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID596  ,Interrupt ID596   Priority/Priority Byte Offset 596 "
group.long 0x658++0x03
line.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150"
hexmask.long.byte 0x00 24.--31. 1. " INTID603  ,Interrupt ID603  Priority/Priority Byte Offset 603 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID602  ,Interrupt ID602   Priority/Priority Byte Offset 602 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID601  ,Interrupt ID601  Priority/Priority Byte Offset 601 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID600  ,Interrupt ID600   Priority/Priority Byte Offset 600 "
group.long 0x65C++0x03
line.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151"
hexmask.long.byte 0x00 24.--31. 1. " INTID607  ,Interrupt ID607  Priority/Priority Byte Offset 607 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID606  ,Interrupt ID606   Priority/Priority Byte Offset 606 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID605  ,Interrupt ID605  Priority/Priority Byte Offset 605 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID604  ,Interrupt ID604   Priority/Priority Byte Offset 604 "
else
hgroup.long 0x640++0x03
hide.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144"
hgroup.long 0x644++0x03
hide.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145"
hgroup.long 0x648++0x03
hide.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146"
hgroup.long 0x64C++0x03
hide.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147"
hgroup.long 0x650++0x03
hide.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148"
hgroup.long 0x654++0x03
hide.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149"
hgroup.long 0x658++0x03
hide.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150"
hgroup.long 0x65C++0x03
hide.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)
group.long 0x660++0x03
line.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152"
hexmask.long.byte 0x00 24.--31. 1. " INTID611  ,Interrupt ID611  Priority/Priority Byte Offset 611 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID610  ,Interrupt ID610   Priority/Priority Byte Offset 610 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID609  ,Interrupt ID609  Priority/Priority Byte Offset 609 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID608  ,Interrupt ID608   Priority/Priority Byte Offset 608 "
group.long 0x664++0x03
line.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153"
hexmask.long.byte 0x00 24.--31. 1. " INTID615  ,Interrupt ID615  Priority/Priority Byte Offset 615 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID614  ,Interrupt ID614   Priority/Priority Byte Offset 614 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID613  ,Interrupt ID613  Priority/Priority Byte Offset 613 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID612  ,Interrupt ID612   Priority/Priority Byte Offset 612 "
group.long 0x668++0x03
line.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154"
hexmask.long.byte 0x00 24.--31. 1. " INTID619  ,Interrupt ID619  Priority/Priority Byte Offset 619 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID618  ,Interrupt ID618   Priority/Priority Byte Offset 618 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID617  ,Interrupt ID617  Priority/Priority Byte Offset 617 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID616  ,Interrupt ID616   Priority/Priority Byte Offset 616 "
group.long 0x66C++0x03
line.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155"
hexmask.long.byte 0x00 24.--31. 1. " INTID623  ,Interrupt ID623  Priority/Priority Byte Offset 623 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID622  ,Interrupt ID622   Priority/Priority Byte Offset 622 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID621  ,Interrupt ID621  Priority/Priority Byte Offset 621 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID620  ,Interrupt ID620   Priority/Priority Byte Offset 620 "
group.long 0x670++0x03
line.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156"
hexmask.long.byte 0x00 24.--31. 1. " INTID627  ,Interrupt ID627  Priority/Priority Byte Offset 627 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID626  ,Interrupt ID626   Priority/Priority Byte Offset 626 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID625  ,Interrupt ID625  Priority/Priority Byte Offset 625 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID624  ,Interrupt ID624   Priority/Priority Byte Offset 624 "
group.long 0x674++0x03
line.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157"
hexmask.long.byte 0x00 24.--31. 1. " INTID631  ,Interrupt ID631  Priority/Priority Byte Offset 631 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID630  ,Interrupt ID630   Priority/Priority Byte Offset 630 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID629  ,Interrupt ID629  Priority/Priority Byte Offset 629 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID628  ,Interrupt ID628   Priority/Priority Byte Offset 628 "
group.long 0x678++0x03
line.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158"
hexmask.long.byte 0x00 24.--31. 1. " INTID635  ,Interrupt ID635  Priority/Priority Byte Offset 635 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID634  ,Interrupt ID634   Priority/Priority Byte Offset 634 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID633  ,Interrupt ID633  Priority/Priority Byte Offset 633 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID632  ,Interrupt ID632   Priority/Priority Byte Offset 632 "
group.long 0x67C++0x03
line.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159"
hexmask.long.byte 0x00 24.--31. 1. " INTID639  ,Interrupt ID639  Priority/Priority Byte Offset 639 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID638  ,Interrupt ID638   Priority/Priority Byte Offset 638 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID637  ,Interrupt ID637  Priority/Priority Byte Offset 637 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID636  ,Interrupt ID636   Priority/Priority Byte Offset 636 "
else
hgroup.long 0x660++0x03
hide.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152"
hgroup.long 0x664++0x03
hide.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153"
hgroup.long 0x668++0x03
hide.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154"
hgroup.long 0x66C++0x03
hide.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155"
hgroup.long 0x670++0x03
hide.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156"
hgroup.long 0x674++0x03
hide.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157"
hgroup.long 0x678++0x03
hide.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158"
hgroup.long 0x67C++0x03
hide.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)
group.long 0x680++0x03
line.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160"
hexmask.long.byte 0x00 24.--31. 1. " INTID643  ,Interrupt ID643  Priority/Priority Byte Offset 643 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID642  ,Interrupt ID642   Priority/Priority Byte Offset 642 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID641  ,Interrupt ID641  Priority/Priority Byte Offset 641 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID640  ,Interrupt ID640   Priority/Priority Byte Offset 640 "
group.long 0x684++0x03
line.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161"
hexmask.long.byte 0x00 24.--31. 1. " INTID647  ,Interrupt ID647  Priority/Priority Byte Offset 647 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID646  ,Interrupt ID646   Priority/Priority Byte Offset 646 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID645  ,Interrupt ID645  Priority/Priority Byte Offset 645 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID644  ,Interrupt ID644   Priority/Priority Byte Offset 644 "
group.long 0x688++0x03
line.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162"
hexmask.long.byte 0x00 24.--31. 1. " INTID651  ,Interrupt ID651  Priority/Priority Byte Offset 651 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID650  ,Interrupt ID650   Priority/Priority Byte Offset 650 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID649  ,Interrupt ID649  Priority/Priority Byte Offset 649 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID648  ,Interrupt ID648   Priority/Priority Byte Offset 648 "
group.long 0x68C++0x03
line.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163"
hexmask.long.byte 0x00 24.--31. 1. " INTID655  ,Interrupt ID655  Priority/Priority Byte Offset 655 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID654  ,Interrupt ID654   Priority/Priority Byte Offset 654 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID653  ,Interrupt ID653  Priority/Priority Byte Offset 653 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID652  ,Interrupt ID652   Priority/Priority Byte Offset 652 "
group.long 0x690++0x03
line.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164"
hexmask.long.byte 0x00 24.--31. 1. " INTID659  ,Interrupt ID659  Priority/Priority Byte Offset 659 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID658  ,Interrupt ID658   Priority/Priority Byte Offset 658 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID657  ,Interrupt ID657  Priority/Priority Byte Offset 657 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID656  ,Interrupt ID656   Priority/Priority Byte Offset 656 "
group.long 0x694++0x03
line.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165"
hexmask.long.byte 0x00 24.--31. 1. " INTID663  ,Interrupt ID663  Priority/Priority Byte Offset 663 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID662  ,Interrupt ID662   Priority/Priority Byte Offset 662 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID661  ,Interrupt ID661  Priority/Priority Byte Offset 661 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID660  ,Interrupt ID660   Priority/Priority Byte Offset 660 "
group.long 0x698++0x03
line.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166"
hexmask.long.byte 0x00 24.--31. 1. " INTID667  ,Interrupt ID667  Priority/Priority Byte Offset 667 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID666  ,Interrupt ID666   Priority/Priority Byte Offset 666 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID665  ,Interrupt ID665  Priority/Priority Byte Offset 665 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID664  ,Interrupt ID664   Priority/Priority Byte Offset 664 "
group.long 0x69C++0x03
line.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167"
hexmask.long.byte 0x00 24.--31. 1. " INTID671  ,Interrupt ID671  Priority/Priority Byte Offset 671 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID670  ,Interrupt ID670   Priority/Priority Byte Offset 670 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID669  ,Interrupt ID669  Priority/Priority Byte Offset 669 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID668  ,Interrupt ID668   Priority/Priority Byte Offset 668 "
else
hgroup.long 0x680++0x03
hide.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160"
hgroup.long 0x684++0x03
hide.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161"
hgroup.long 0x688++0x03
hide.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162"
hgroup.long 0x68C++0x03
hide.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163"
hgroup.long 0x690++0x03
hide.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164"
hgroup.long 0x694++0x03
hide.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165"
hgroup.long 0x698++0x03
hide.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166"
hgroup.long 0x69C++0x03
hide.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)
group.long 0x6A0++0x03
line.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168"
hexmask.long.byte 0x00 24.--31. 1. " INTID675  ,Interrupt ID675  Priority/Priority Byte Offset 675 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID674  ,Interrupt ID674   Priority/Priority Byte Offset 674 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID673  ,Interrupt ID673  Priority/Priority Byte Offset 673 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID672  ,Interrupt ID672   Priority/Priority Byte Offset 672 "
group.long 0x6A4++0x03
line.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169"
hexmask.long.byte 0x00 24.--31. 1. " INTID679  ,Interrupt ID679  Priority/Priority Byte Offset 679 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID678  ,Interrupt ID678   Priority/Priority Byte Offset 678 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID677  ,Interrupt ID677  Priority/Priority Byte Offset 677 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID676  ,Interrupt ID676   Priority/Priority Byte Offset 676 "
group.long 0x6A8++0x03
line.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170"
hexmask.long.byte 0x00 24.--31. 1. " INTID683  ,Interrupt ID683  Priority/Priority Byte Offset 683 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID682  ,Interrupt ID682   Priority/Priority Byte Offset 682 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID681  ,Interrupt ID681  Priority/Priority Byte Offset 681 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID680  ,Interrupt ID680   Priority/Priority Byte Offset 680 "
group.long 0x6AC++0x03
line.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171"
hexmask.long.byte 0x00 24.--31. 1. " INTID687  ,Interrupt ID687  Priority/Priority Byte Offset 687 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID686  ,Interrupt ID686   Priority/Priority Byte Offset 686 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID685  ,Interrupt ID685  Priority/Priority Byte Offset 685 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID684  ,Interrupt ID684   Priority/Priority Byte Offset 684 "
group.long 0x6B0++0x03
line.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172"
hexmask.long.byte 0x00 24.--31. 1. " INTID691  ,Interrupt ID691  Priority/Priority Byte Offset 691 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID690  ,Interrupt ID690   Priority/Priority Byte Offset 690 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID689  ,Interrupt ID689  Priority/Priority Byte Offset 689 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID688  ,Interrupt ID688   Priority/Priority Byte Offset 688 "
group.long 0x6B4++0x03
line.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173"
hexmask.long.byte 0x00 24.--31. 1. " INTID695  ,Interrupt ID695  Priority/Priority Byte Offset 695 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID694  ,Interrupt ID694   Priority/Priority Byte Offset 694 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID693  ,Interrupt ID693  Priority/Priority Byte Offset 693 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID692  ,Interrupt ID692   Priority/Priority Byte Offset 692 "
group.long 0x6B8++0x03
line.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174"
hexmask.long.byte 0x00 24.--31. 1. " INTID699  ,Interrupt ID699  Priority/Priority Byte Offset 699 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID698  ,Interrupt ID698   Priority/Priority Byte Offset 698 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID697  ,Interrupt ID697  Priority/Priority Byte Offset 697 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID696  ,Interrupt ID696   Priority/Priority Byte Offset 696 "
group.long 0x6BC++0x03
line.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175"
hexmask.long.byte 0x00 24.--31. 1. " INTID703  ,Interrupt ID703  Priority/Priority Byte Offset 703 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID702  ,Interrupt ID702   Priority/Priority Byte Offset 702 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID701  ,Interrupt ID701  Priority/Priority Byte Offset 701 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID700  ,Interrupt ID700   Priority/Priority Byte Offset 700 "
else
hgroup.long 0x6A0++0x03
hide.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168"
hgroup.long 0x6A4++0x03
hide.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169"
hgroup.long 0x6A8++0x03
hide.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170"
hgroup.long 0x6AC++0x03
hide.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171"
hgroup.long 0x6B0++0x03
hide.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172"
hgroup.long 0x6B4++0x03
hide.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173"
hgroup.long 0x6B8++0x03
hide.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174"
hgroup.long 0x6BC++0x03
hide.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)
group.long 0x6C0++0x03
line.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176"
hexmask.long.byte 0x00 24.--31. 1. " INTID707  ,Interrupt ID707  Priority/Priority Byte Offset 707 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID706  ,Interrupt ID706   Priority/Priority Byte Offset 706 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID705  ,Interrupt ID705  Priority/Priority Byte Offset 705 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID704  ,Interrupt ID704   Priority/Priority Byte Offset 704 "
group.long 0x6C4++0x03
line.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177"
hexmask.long.byte 0x00 24.--31. 1. " INTID711  ,Interrupt ID711  Priority/Priority Byte Offset 711 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID710  ,Interrupt ID710   Priority/Priority Byte Offset 710 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID709  ,Interrupt ID709  Priority/Priority Byte Offset 709 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID708  ,Interrupt ID708   Priority/Priority Byte Offset 708 "
group.long 0x6C8++0x03
line.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178"
hexmask.long.byte 0x00 24.--31. 1. " INTID715  ,Interrupt ID715  Priority/Priority Byte Offset 715 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID714  ,Interrupt ID714   Priority/Priority Byte Offset 714 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID713  ,Interrupt ID713  Priority/Priority Byte Offset 713 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID712  ,Interrupt ID712   Priority/Priority Byte Offset 712 "
group.long 0x6CC++0x03
line.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179"
hexmask.long.byte 0x00 24.--31. 1. " INTID719  ,Interrupt ID719  Priority/Priority Byte Offset 719 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID718  ,Interrupt ID718   Priority/Priority Byte Offset 718 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID717  ,Interrupt ID717  Priority/Priority Byte Offset 717 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID716  ,Interrupt ID716   Priority/Priority Byte Offset 716 "
group.long 0x6D0++0x03
line.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180"
hexmask.long.byte 0x00 24.--31. 1. " INTID723  ,Interrupt ID723  Priority/Priority Byte Offset 723 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID722  ,Interrupt ID722   Priority/Priority Byte Offset 722 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID721  ,Interrupt ID721  Priority/Priority Byte Offset 721 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID720  ,Interrupt ID720   Priority/Priority Byte Offset 720 "
group.long 0x6D4++0x03
line.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181"
hexmask.long.byte 0x00 24.--31. 1. " INTID727  ,Interrupt ID727  Priority/Priority Byte Offset 727 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID726  ,Interrupt ID726   Priority/Priority Byte Offset 726 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID725  ,Interrupt ID725  Priority/Priority Byte Offset 725 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID724  ,Interrupt ID724   Priority/Priority Byte Offset 724 "
group.long 0x6D8++0x03
line.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182"
hexmask.long.byte 0x00 24.--31. 1. " INTID731  ,Interrupt ID731  Priority/Priority Byte Offset 731 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID730  ,Interrupt ID730   Priority/Priority Byte Offset 730 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID729  ,Interrupt ID729  Priority/Priority Byte Offset 729 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID728  ,Interrupt ID728   Priority/Priority Byte Offset 728 "
group.long 0x6DC++0x03
line.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183"
hexmask.long.byte 0x00 24.--31. 1. " INTID735  ,Interrupt ID735  Priority/Priority Byte Offset 735 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID734  ,Interrupt ID734   Priority/Priority Byte Offset 734 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID733  ,Interrupt ID733  Priority/Priority Byte Offset 733 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID732  ,Interrupt ID732   Priority/Priority Byte Offset 732 "
else
hgroup.long 0x6C0++0x03
hide.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176"
hgroup.long 0x6C4++0x03
hide.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177"
hgroup.long 0x6C8++0x03
hide.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178"
hgroup.long 0x6CC++0x03
hide.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179"
hgroup.long 0x6D0++0x03
hide.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180"
hgroup.long 0x6D4++0x03
hide.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181"
hgroup.long 0x6D8++0x03
hide.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182"
hgroup.long 0x6DC++0x03
hide.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)
group.long 0x6E0++0x03
line.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184"
hexmask.long.byte 0x00 24.--31. 1. " INTID739  ,Interrupt ID739  Priority/Priority Byte Offset 739 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID738  ,Interrupt ID738   Priority/Priority Byte Offset 738 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID737  ,Interrupt ID737  Priority/Priority Byte Offset 737 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID736  ,Interrupt ID736   Priority/Priority Byte Offset 736 "
group.long 0x6E4++0x03
line.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185"
hexmask.long.byte 0x00 24.--31. 1. " INTID743  ,Interrupt ID743  Priority/Priority Byte Offset 743 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID742  ,Interrupt ID742   Priority/Priority Byte Offset 742 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID741  ,Interrupt ID741  Priority/Priority Byte Offset 741 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID740  ,Interrupt ID740   Priority/Priority Byte Offset 740 "
group.long 0x6E8++0x03
line.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186"
hexmask.long.byte 0x00 24.--31. 1. " INTID747  ,Interrupt ID747  Priority/Priority Byte Offset 747 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID746  ,Interrupt ID746   Priority/Priority Byte Offset 746 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID745  ,Interrupt ID745  Priority/Priority Byte Offset 745 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID744  ,Interrupt ID744   Priority/Priority Byte Offset 744 "
group.long 0x6EC++0x03
line.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187"
hexmask.long.byte 0x00 24.--31. 1. " INTID751  ,Interrupt ID751  Priority/Priority Byte Offset 751 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID750  ,Interrupt ID750   Priority/Priority Byte Offset 750 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID749  ,Interrupt ID749  Priority/Priority Byte Offset 749 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID748  ,Interrupt ID748   Priority/Priority Byte Offset 748 "
group.long 0x6F0++0x03
line.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188"
hexmask.long.byte 0x00 24.--31. 1. " INTID755  ,Interrupt ID755  Priority/Priority Byte Offset 755 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID754  ,Interrupt ID754   Priority/Priority Byte Offset 754 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID753  ,Interrupt ID753  Priority/Priority Byte Offset 753 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID752  ,Interrupt ID752   Priority/Priority Byte Offset 752 "
group.long 0x6F4++0x03
line.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189"
hexmask.long.byte 0x00 24.--31. 1. " INTID759  ,Interrupt ID759  Priority/Priority Byte Offset 759 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID758  ,Interrupt ID758   Priority/Priority Byte Offset 758 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID757  ,Interrupt ID757  Priority/Priority Byte Offset 757 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID756  ,Interrupt ID756   Priority/Priority Byte Offset 756 "
group.long 0x6F8++0x03
line.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190"
hexmask.long.byte 0x00 24.--31. 1. " INTID763  ,Interrupt ID763  Priority/Priority Byte Offset 763 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID762  ,Interrupt ID762   Priority/Priority Byte Offset 762 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID761  ,Interrupt ID761  Priority/Priority Byte Offset 761 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID760  ,Interrupt ID760   Priority/Priority Byte Offset 760 "
group.long 0x6FC++0x03
line.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191"
hexmask.long.byte 0x00 24.--31. 1. " INTID767  ,Interrupt ID767  Priority/Priority Byte Offset 767 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID766  ,Interrupt ID766   Priority/Priority Byte Offset 766 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID765  ,Interrupt ID765  Priority/Priority Byte Offset 765 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID764  ,Interrupt ID764   Priority/Priority Byte Offset 764 "
else
hgroup.long 0x6E0++0x03
hide.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184"
hgroup.long 0x6E4++0x03
hide.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185"
hgroup.long 0x6E8++0x03
hide.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186"
hgroup.long 0x6EC++0x03
hide.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187"
hgroup.long 0x6F0++0x03
hide.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188"
hgroup.long 0x6F4++0x03
hide.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189"
hgroup.long 0x6F8++0x03
hide.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190"
hgroup.long 0x6FC++0x03
hide.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)
group.long 0x700++0x03
line.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192"
hexmask.long.byte 0x00 24.--31. 1. " INTID771  ,Interrupt ID771  Priority/Priority Byte Offset 771 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID770  ,Interrupt ID770   Priority/Priority Byte Offset 770 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID769  ,Interrupt ID769  Priority/Priority Byte Offset 769 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID768  ,Interrupt ID768   Priority/Priority Byte Offset 768 "
group.long 0x704++0x03
line.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193"
hexmask.long.byte 0x00 24.--31. 1. " INTID775  ,Interrupt ID775  Priority/Priority Byte Offset 775 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID774  ,Interrupt ID774   Priority/Priority Byte Offset 774 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID773  ,Interrupt ID773  Priority/Priority Byte Offset 773 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID772  ,Interrupt ID772   Priority/Priority Byte Offset 772 "
group.long 0x708++0x03
line.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194"
hexmask.long.byte 0x00 24.--31. 1. " INTID779  ,Interrupt ID779  Priority/Priority Byte Offset 779 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID778  ,Interrupt ID778   Priority/Priority Byte Offset 778 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID777  ,Interrupt ID777  Priority/Priority Byte Offset 777 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID776  ,Interrupt ID776   Priority/Priority Byte Offset 776 "
group.long 0x70C++0x03
line.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195"
hexmask.long.byte 0x00 24.--31. 1. " INTID783  ,Interrupt ID783  Priority/Priority Byte Offset 783 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID782  ,Interrupt ID782   Priority/Priority Byte Offset 782 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID781  ,Interrupt ID781  Priority/Priority Byte Offset 781 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID780  ,Interrupt ID780   Priority/Priority Byte Offset 780 "
group.long 0x710++0x03
line.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196"
hexmask.long.byte 0x00 24.--31. 1. " INTID787  ,Interrupt ID787  Priority/Priority Byte Offset 787 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID786  ,Interrupt ID786   Priority/Priority Byte Offset 786 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID785  ,Interrupt ID785  Priority/Priority Byte Offset 785 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID784  ,Interrupt ID784   Priority/Priority Byte Offset 784 "
group.long 0x714++0x03
line.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197"
hexmask.long.byte 0x00 24.--31. 1. " INTID791  ,Interrupt ID791  Priority/Priority Byte Offset 791 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID790  ,Interrupt ID790   Priority/Priority Byte Offset 790 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID789  ,Interrupt ID789  Priority/Priority Byte Offset 789 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID788  ,Interrupt ID788   Priority/Priority Byte Offset 788 "
group.long 0x718++0x03
line.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198"
hexmask.long.byte 0x00 24.--31. 1. " INTID795  ,Interrupt ID795  Priority/Priority Byte Offset 795 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID794  ,Interrupt ID794   Priority/Priority Byte Offset 794 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID793  ,Interrupt ID793  Priority/Priority Byte Offset 793 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID792  ,Interrupt ID792   Priority/Priority Byte Offset 792 "
group.long 0x71C++0x03
line.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199"
hexmask.long.byte 0x00 24.--31. 1. " INTID799  ,Interrupt ID799  Priority/Priority Byte Offset 799 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID798  ,Interrupt ID798   Priority/Priority Byte Offset 798 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID797  ,Interrupt ID797  Priority/Priority Byte Offset 797 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID796  ,Interrupt ID796   Priority/Priority Byte Offset 796 "
else
hgroup.long 0x700++0x03
hide.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192"
hgroup.long 0x704++0x03
hide.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193"
hgroup.long 0x708++0x03
hide.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194"
hgroup.long 0x70C++0x03
hide.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195"
hgroup.long 0x710++0x03
hide.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196"
hgroup.long 0x714++0x03
hide.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197"
hgroup.long 0x718++0x03
hide.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198"
hgroup.long 0x71C++0x03
hide.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)
group.long 0x720++0x03
line.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200"
hexmask.long.byte 0x00 24.--31. 1. " INTID803  ,Interrupt ID803  Priority/Priority Byte Offset 803 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID802  ,Interrupt ID802   Priority/Priority Byte Offset 802 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID801  ,Interrupt ID801  Priority/Priority Byte Offset 801 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID800  ,Interrupt ID800   Priority/Priority Byte Offset 800 "
group.long 0x724++0x03
line.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201"
hexmask.long.byte 0x00 24.--31. 1. " INTID807  ,Interrupt ID807  Priority/Priority Byte Offset 807 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID806  ,Interrupt ID806   Priority/Priority Byte Offset 806 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID805  ,Interrupt ID805  Priority/Priority Byte Offset 805 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID804  ,Interrupt ID804   Priority/Priority Byte Offset 804 "
group.long 0x728++0x03
line.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202"
hexmask.long.byte 0x00 24.--31. 1. " INTID811  ,Interrupt ID811  Priority/Priority Byte Offset 811 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID810  ,Interrupt ID810   Priority/Priority Byte Offset 810 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID809  ,Interrupt ID809  Priority/Priority Byte Offset 809 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID808  ,Interrupt ID808   Priority/Priority Byte Offset 808 "
group.long 0x72C++0x03
line.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203"
hexmask.long.byte 0x00 24.--31. 1. " INTID815  ,Interrupt ID815  Priority/Priority Byte Offset 815 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID814  ,Interrupt ID814   Priority/Priority Byte Offset 814 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID813  ,Interrupt ID813  Priority/Priority Byte Offset 813 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID812  ,Interrupt ID812   Priority/Priority Byte Offset 812 "
group.long 0x730++0x03
line.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204"
hexmask.long.byte 0x00 24.--31. 1. " INTID819  ,Interrupt ID819  Priority/Priority Byte Offset 819 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID818  ,Interrupt ID818   Priority/Priority Byte Offset 818 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID817  ,Interrupt ID817  Priority/Priority Byte Offset 817 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID816  ,Interrupt ID816   Priority/Priority Byte Offset 816 "
group.long 0x734++0x03
line.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205"
hexmask.long.byte 0x00 24.--31. 1. " INTID823  ,Interrupt ID823  Priority/Priority Byte Offset 823 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID822  ,Interrupt ID822   Priority/Priority Byte Offset 822 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID821  ,Interrupt ID821  Priority/Priority Byte Offset 821 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID820  ,Interrupt ID820   Priority/Priority Byte Offset 820 "
group.long 0x738++0x03
line.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206"
hexmask.long.byte 0x00 24.--31. 1. " INTID827  ,Interrupt ID827  Priority/Priority Byte Offset 827 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID826  ,Interrupt ID826   Priority/Priority Byte Offset 826 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID825  ,Interrupt ID825  Priority/Priority Byte Offset 825 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID824  ,Interrupt ID824   Priority/Priority Byte Offset 824 "
group.long 0x73C++0x03
line.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207"
hexmask.long.byte 0x00 24.--31. 1. " INTID831  ,Interrupt ID831  Priority/Priority Byte Offset 831 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID830  ,Interrupt ID830   Priority/Priority Byte Offset 830 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID829  ,Interrupt ID829  Priority/Priority Byte Offset 829 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID828  ,Interrupt ID828   Priority/Priority Byte Offset 828 "
else
hgroup.long 0x720++0x03
hide.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200"
hgroup.long 0x724++0x03
hide.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201"
hgroup.long 0x728++0x03
hide.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202"
hgroup.long 0x72C++0x03
hide.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203"
hgroup.long 0x730++0x03
hide.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204"
hgroup.long 0x734++0x03
hide.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205"
hgroup.long 0x738++0x03
hide.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206"
hgroup.long 0x73C++0x03
hide.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A)
group.long 0x740++0x03
line.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208"
hexmask.long.byte 0x00 24.--31. 1. " INTID835  ,Interrupt ID835  Priority/Priority Byte Offset 835 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID834  ,Interrupt ID834   Priority/Priority Byte Offset 834 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID833  ,Interrupt ID833  Priority/Priority Byte Offset 833 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID832  ,Interrupt ID832   Priority/Priority Byte Offset 832 "
group.long 0x744++0x03
line.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209"
hexmask.long.byte 0x00 24.--31. 1. " INTID839  ,Interrupt ID839  Priority/Priority Byte Offset 839 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID838  ,Interrupt ID838   Priority/Priority Byte Offset 838 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID837  ,Interrupt ID837  Priority/Priority Byte Offset 837 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID836  ,Interrupt ID836   Priority/Priority Byte Offset 836 "
group.long 0x748++0x03
line.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210"
hexmask.long.byte 0x00 24.--31. 1. " INTID843  ,Interrupt ID843  Priority/Priority Byte Offset 843 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID842  ,Interrupt ID842   Priority/Priority Byte Offset 842 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID841  ,Interrupt ID841  Priority/Priority Byte Offset 841 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID840  ,Interrupt ID840   Priority/Priority Byte Offset 840 "
group.long 0x74C++0x03
line.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211"
hexmask.long.byte 0x00 24.--31. 1. " INTID847  ,Interrupt ID847  Priority/Priority Byte Offset 847 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID846  ,Interrupt ID846   Priority/Priority Byte Offset 846 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID845  ,Interrupt ID845  Priority/Priority Byte Offset 845 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID844  ,Interrupt ID844   Priority/Priority Byte Offset 844 "
group.long 0x750++0x03
line.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212"
hexmask.long.byte 0x00 24.--31. 1. " INTID851  ,Interrupt ID851  Priority/Priority Byte Offset 851 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID850  ,Interrupt ID850   Priority/Priority Byte Offset 850 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID849  ,Interrupt ID849  Priority/Priority Byte Offset 849 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID848  ,Interrupt ID848   Priority/Priority Byte Offset 848 "
group.long 0x754++0x03
line.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213"
hexmask.long.byte 0x00 24.--31. 1. " INTID855  ,Interrupt ID855  Priority/Priority Byte Offset 855 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID854  ,Interrupt ID854   Priority/Priority Byte Offset 854 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID853  ,Interrupt ID853  Priority/Priority Byte Offset 853 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID852  ,Interrupt ID852   Priority/Priority Byte Offset 852 "
group.long 0x758++0x03
line.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214"
hexmask.long.byte 0x00 24.--31. 1. " INTID859  ,Interrupt ID859  Priority/Priority Byte Offset 859 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID858  ,Interrupt ID858   Priority/Priority Byte Offset 858 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID857  ,Interrupt ID857  Priority/Priority Byte Offset 857 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID856  ,Interrupt ID856   Priority/Priority Byte Offset 856 "
group.long 0x75C++0x03
line.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215"
hexmask.long.byte 0x00 24.--31. 1. " INTID863  ,Interrupt ID863  Priority/Priority Byte Offset 863 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID862  ,Interrupt ID862   Priority/Priority Byte Offset 862 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID861  ,Interrupt ID861  Priority/Priority Byte Offset 861 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID860  ,Interrupt ID860   Priority/Priority Byte Offset 860 "
else
hgroup.long 0x740++0x03
hide.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208"
hgroup.long 0x744++0x03
hide.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209"
hgroup.long 0x748++0x03
hide.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210"
hgroup.long 0x74C++0x03
hide.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211"
hgroup.long 0x750++0x03
hide.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212"
hgroup.long 0x754++0x03
hide.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213"
hgroup.long 0x758++0x03
hide.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214"
hgroup.long 0x75C++0x03
hide.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)
group.long 0x760++0x03
line.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216"
hexmask.long.byte 0x00 24.--31. 1. " INTID867  ,Interrupt ID867  Priority/Priority Byte Offset 867 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID866  ,Interrupt ID866   Priority/Priority Byte Offset 866 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID865  ,Interrupt ID865  Priority/Priority Byte Offset 865 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID864  ,Interrupt ID864   Priority/Priority Byte Offset 864 "
group.long 0x764++0x03
line.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217"
hexmask.long.byte 0x00 24.--31. 1. " INTID871  ,Interrupt ID871  Priority/Priority Byte Offset 871 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID870  ,Interrupt ID870   Priority/Priority Byte Offset 870 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID869  ,Interrupt ID869  Priority/Priority Byte Offset 869 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID868  ,Interrupt ID868   Priority/Priority Byte Offset 868 "
group.long 0x768++0x03
line.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218"
hexmask.long.byte 0x00 24.--31. 1. " INTID875  ,Interrupt ID875  Priority/Priority Byte Offset 875 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID874  ,Interrupt ID874   Priority/Priority Byte Offset 874 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID873  ,Interrupt ID873  Priority/Priority Byte Offset 873 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID872  ,Interrupt ID872   Priority/Priority Byte Offset 872 "
group.long 0x76C++0x03
line.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219"
hexmask.long.byte 0x00 24.--31. 1. " INTID879  ,Interrupt ID879  Priority/Priority Byte Offset 879 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID878  ,Interrupt ID878   Priority/Priority Byte Offset 878 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID877  ,Interrupt ID877  Priority/Priority Byte Offset 877 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID876  ,Interrupt ID876   Priority/Priority Byte Offset 876 "
group.long 0x770++0x03
line.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220"
hexmask.long.byte 0x00 24.--31. 1. " INTID883  ,Interrupt ID883  Priority/Priority Byte Offset 883 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID882  ,Interrupt ID882   Priority/Priority Byte Offset 882 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID881  ,Interrupt ID881  Priority/Priority Byte Offset 881 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID880  ,Interrupt ID880   Priority/Priority Byte Offset 880 "
group.long 0x774++0x03
line.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221"
hexmask.long.byte 0x00 24.--31. 1. " INTID887  ,Interrupt ID887  Priority/Priority Byte Offset 887 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID886  ,Interrupt ID886   Priority/Priority Byte Offset 886 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID885  ,Interrupt ID885  Priority/Priority Byte Offset 885 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID884  ,Interrupt ID884   Priority/Priority Byte Offset 884 "
group.long 0x778++0x03
line.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222"
hexmask.long.byte 0x00 24.--31. 1. " INTID891  ,Interrupt ID891  Priority/Priority Byte Offset 891 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID890  ,Interrupt ID890   Priority/Priority Byte Offset 890 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID889  ,Interrupt ID889  Priority/Priority Byte Offset 889 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID888  ,Interrupt ID888   Priority/Priority Byte Offset 888 "
group.long 0x77C++0x03
line.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223"
hexmask.long.byte 0x00 24.--31. 1. " INTID895  ,Interrupt ID895  Priority/Priority Byte Offset 895 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID894  ,Interrupt ID894   Priority/Priority Byte Offset 894 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID893  ,Interrupt ID893  Priority/Priority Byte Offset 893 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID892  ,Interrupt ID892   Priority/Priority Byte Offset 892 "
else
hgroup.long 0x760++0x03
hide.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216"
hgroup.long 0x764++0x03
hide.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217"
hgroup.long 0x768++0x03
hide.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218"
hgroup.long 0x76C++0x03
hide.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219"
hgroup.long 0x770++0x03
hide.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220"
hgroup.long 0x774++0x03
hide.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221"
hgroup.long 0x778++0x03
hide.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222"
hgroup.long 0x77C++0x03
hide.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)
group.long 0x780++0x03
line.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224"
hexmask.long.byte 0x00 24.--31. 1. " INTID899  ,Interrupt ID899  Priority/Priority Byte Offset 899 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID898  ,Interrupt ID898   Priority/Priority Byte Offset 898 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID897  ,Interrupt ID897  Priority/Priority Byte Offset 897 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID896  ,Interrupt ID896   Priority/Priority Byte Offset 896 "
group.long 0x784++0x03
line.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225"
hexmask.long.byte 0x00 24.--31. 1. " INTID903  ,Interrupt ID903  Priority/Priority Byte Offset 903 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID902  ,Interrupt ID902   Priority/Priority Byte Offset 902 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID901  ,Interrupt ID901  Priority/Priority Byte Offset 901 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID900  ,Interrupt ID900   Priority/Priority Byte Offset 900 "
group.long 0x788++0x03
line.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226"
hexmask.long.byte 0x00 24.--31. 1. " INTID907  ,Interrupt ID907  Priority/Priority Byte Offset 907 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID906  ,Interrupt ID906   Priority/Priority Byte Offset 906 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID905  ,Interrupt ID905  Priority/Priority Byte Offset 905 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID904  ,Interrupt ID904   Priority/Priority Byte Offset 904 "
group.long 0x78C++0x03
line.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227"
hexmask.long.byte 0x00 24.--31. 1. " INTID911  ,Interrupt ID911  Priority/Priority Byte Offset 911 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID910  ,Interrupt ID910   Priority/Priority Byte Offset 910 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID909  ,Interrupt ID909  Priority/Priority Byte Offset 909 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID908  ,Interrupt ID908   Priority/Priority Byte Offset 908 "
group.long 0x790++0x03
line.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228"
hexmask.long.byte 0x00 24.--31. 1. " INTID915  ,Interrupt ID915  Priority/Priority Byte Offset 915 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID914  ,Interrupt ID914   Priority/Priority Byte Offset 914 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID913  ,Interrupt ID913  Priority/Priority Byte Offset 913 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID912  ,Interrupt ID912   Priority/Priority Byte Offset 912 "
group.long 0x794++0x03
line.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229"
hexmask.long.byte 0x00 24.--31. 1. " INTID919  ,Interrupt ID919  Priority/Priority Byte Offset 919 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID918  ,Interrupt ID918   Priority/Priority Byte Offset 918 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID917  ,Interrupt ID917  Priority/Priority Byte Offset 917 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID916  ,Interrupt ID916   Priority/Priority Byte Offset 916 "
group.long 0x798++0x03
line.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230"
hexmask.long.byte 0x00 24.--31. 1. " INTID923  ,Interrupt ID923  Priority/Priority Byte Offset 923 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID922  ,Interrupt ID922   Priority/Priority Byte Offset 922 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID921  ,Interrupt ID921  Priority/Priority Byte Offset 921 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID920  ,Interrupt ID920   Priority/Priority Byte Offset 920 "
group.long 0x79C++0x03
line.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231"
hexmask.long.byte 0x00 24.--31. 1. " INTID927  ,Interrupt ID927  Priority/Priority Byte Offset 927 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID926  ,Interrupt ID926   Priority/Priority Byte Offset 926 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID925  ,Interrupt ID925  Priority/Priority Byte Offset 925 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID924  ,Interrupt ID924   Priority/Priority Byte Offset 924 "
else
hgroup.long 0x780++0x03
hide.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224"
hgroup.long 0x784++0x03
hide.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225"
hgroup.long 0x788++0x03
hide.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226"
hgroup.long 0x78C++0x03
hide.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227"
hgroup.long 0x790++0x03
hide.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228"
hgroup.long 0x794++0x03
hide.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229"
hgroup.long 0x798++0x03
hide.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230"
hgroup.long 0x79C++0x03
hide.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)
group.long 0x7A0++0x03
line.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232"
hexmask.long.byte 0x00 24.--31. 1. " INTID931  ,Interrupt ID931  Priority/Priority Byte Offset 931 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID930  ,Interrupt ID930   Priority/Priority Byte Offset 930 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID929  ,Interrupt ID929  Priority/Priority Byte Offset 929 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID928  ,Interrupt ID928   Priority/Priority Byte Offset 928 "
group.long 0x7A4++0x03
line.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233"
hexmask.long.byte 0x00 24.--31. 1. " INTID935  ,Interrupt ID935  Priority/Priority Byte Offset 935 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID934  ,Interrupt ID934   Priority/Priority Byte Offset 934 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID933  ,Interrupt ID933  Priority/Priority Byte Offset 933 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID932  ,Interrupt ID932   Priority/Priority Byte Offset 932 "
group.long 0x7A8++0x03
line.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234"
hexmask.long.byte 0x00 24.--31. 1. " INTID939  ,Interrupt ID939  Priority/Priority Byte Offset 939 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID938  ,Interrupt ID938   Priority/Priority Byte Offset 938 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID937  ,Interrupt ID937  Priority/Priority Byte Offset 937 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID936  ,Interrupt ID936   Priority/Priority Byte Offset 936 "
group.long 0x7AC++0x03
line.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235"
hexmask.long.byte 0x00 24.--31. 1. " INTID943  ,Interrupt ID943  Priority/Priority Byte Offset 943 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID942  ,Interrupt ID942   Priority/Priority Byte Offset 942 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID941  ,Interrupt ID941  Priority/Priority Byte Offset 941 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID940  ,Interrupt ID940   Priority/Priority Byte Offset 940 "
group.long 0x7B0++0x03
line.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236"
hexmask.long.byte 0x00 24.--31. 1. " INTID947  ,Interrupt ID947  Priority/Priority Byte Offset 947 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID946  ,Interrupt ID946   Priority/Priority Byte Offset 946 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID945  ,Interrupt ID945  Priority/Priority Byte Offset 945 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID944  ,Interrupt ID944   Priority/Priority Byte Offset 944 "
group.long 0x7B4++0x03
line.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237"
hexmask.long.byte 0x00 24.--31. 1. " INTID951  ,Interrupt ID951  Priority/Priority Byte Offset 951 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID950  ,Interrupt ID950   Priority/Priority Byte Offset 950 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID949  ,Interrupt ID949  Priority/Priority Byte Offset 949 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID948  ,Interrupt ID948   Priority/Priority Byte Offset 948 "
group.long 0x7B8++0x03
line.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238"
hexmask.long.byte 0x00 24.--31. 1. " INTID955  ,Interrupt ID955  Priority/Priority Byte Offset 955 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID954  ,Interrupt ID954   Priority/Priority Byte Offset 954 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID953  ,Interrupt ID953  Priority/Priority Byte Offset 953 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID952  ,Interrupt ID952   Priority/Priority Byte Offset 952 "
group.long 0x7BC++0x03
line.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239"
hexmask.long.byte 0x00 24.--31. 1. " INTID959  ,Interrupt ID959  Priority/Priority Byte Offset 959 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID958  ,Interrupt ID958   Priority/Priority Byte Offset 958 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID957  ,Interrupt ID957  Priority/Priority Byte Offset 957 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID956  ,Interrupt ID956   Priority/Priority Byte Offset 956 "
else
hgroup.long 0x7A0++0x03
hide.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232"
hgroup.long 0x7A4++0x03
hide.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233"
hgroup.long 0x7A8++0x03
hide.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234"
hgroup.long 0x7AC++0x03
hide.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235"
hgroup.long 0x7B0++0x03
hide.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236"
hgroup.long 0x7B4++0x03
hide.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237"
hgroup.long 0x7B8++0x03
hide.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238"
hgroup.long 0x7BC++0x03
hide.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)
group.long 0x7C0++0x03
line.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240"
hexmask.long.byte 0x00 24.--31. 1. " INTID963  ,Interrupt ID963  Priority/Priority Byte Offset 963 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID962  ,Interrupt ID962   Priority/Priority Byte Offset 962 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID961  ,Interrupt ID961  Priority/Priority Byte Offset 961 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID960  ,Interrupt ID960   Priority/Priority Byte Offset 960 "
group.long 0x7C4++0x03
line.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241"
hexmask.long.byte 0x00 24.--31. 1. " INTID967  ,Interrupt ID967  Priority/Priority Byte Offset 967 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID966  ,Interrupt ID966   Priority/Priority Byte Offset 966 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID965  ,Interrupt ID965  Priority/Priority Byte Offset 965 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID964  ,Interrupt ID964   Priority/Priority Byte Offset 964 "
group.long 0x7C8++0x03
line.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242"
hexmask.long.byte 0x00 24.--31. 1. " INTID971  ,Interrupt ID971  Priority/Priority Byte Offset 971 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID970  ,Interrupt ID970   Priority/Priority Byte Offset 970 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID969  ,Interrupt ID969  Priority/Priority Byte Offset 969 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID968  ,Interrupt ID968   Priority/Priority Byte Offset 968 "
group.long 0x7CC++0x03
line.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243"
hexmask.long.byte 0x00 24.--31. 1. " INTID975  ,Interrupt ID975  Priority/Priority Byte Offset 975 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID974  ,Interrupt ID974   Priority/Priority Byte Offset 974 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID973  ,Interrupt ID973  Priority/Priority Byte Offset 973 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID972  ,Interrupt ID972   Priority/Priority Byte Offset 972 "
group.long 0x7D0++0x03
line.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244"
hexmask.long.byte 0x00 24.--31. 1. " INTID979  ,Interrupt ID979  Priority/Priority Byte Offset 979 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID978  ,Interrupt ID978   Priority/Priority Byte Offset 978 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID977  ,Interrupt ID977  Priority/Priority Byte Offset 977 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID976  ,Interrupt ID976   Priority/Priority Byte Offset 976 "
group.long 0x7D4++0x03
line.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245"
hexmask.long.byte 0x00 24.--31. 1. " INTID983  ,Interrupt ID983  Priority/Priority Byte Offset 983 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID982  ,Interrupt ID982   Priority/Priority Byte Offset 982 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID981  ,Interrupt ID981  Priority/Priority Byte Offset 981 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID980  ,Interrupt ID980   Priority/Priority Byte Offset 980 "
group.long 0x7D8++0x03
line.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246"
hexmask.long.byte 0x00 24.--31. 1. " INTID987  ,Interrupt ID987  Priority/Priority Byte Offset 987 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID986  ,Interrupt ID986   Priority/Priority Byte Offset 986 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID985  ,Interrupt ID985  Priority/Priority Byte Offset 985 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID984  ,Interrupt ID984   Priority/Priority Byte Offset 984 "
group.long 0x7DC++0x03
line.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247"
hexmask.long.byte 0x00 24.--31. 1. " INTID991  ,Interrupt ID991  Priority/Priority Byte Offset 991 "
hexmask.long.byte 0x00 16.--23. 1. "  INTID990  ,Interrupt ID990   Priority/Priority Byte Offset 990 "
hexmask.long.byte 0x00 8.--15. 1. "  INTID989  ,Interrupt ID989  Priority/Priority Byte Offset 989 "
hexmask.long.byte 0x00 0.--7. 1. "  INTID988  ,Interrupt ID988   Priority/Priority Byte Offset 988 "
else
hgroup.long 0x7C0++0x03
hide.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240"
hgroup.long 0x7C4++0x03
hide.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241"
hgroup.long 0x7C8++0x03
hide.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242"
hgroup.long 0x7CC++0x03
hide.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243"
hgroup.long 0x7D0++0x03
hide.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244"
hgroup.long 0x7D4++0x03
hide.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245"
hgroup.long 0x7D8++0x03
hide.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246"
hgroup.long 0x7DC++0x03
hide.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247"
endif
tree.end
width 19.
tree "Interrupt Targets Registers"
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x000000E0)>0x1)
hgroup.long 0x800++0x03
hide.long 0x00 "GICD_ITARGETSR0,Interrupt Processor Targets Register 0"
hgroup.long 0x804++0x03
hide.long 0x00 "GICD_ITARGETSR1,Interrupt Processor Targets Register 1"
hgroup.long 0x808++0x03
hide.long 0x00 "GICD_ITARGETSR2,Interrupt Processor Targets Register 2"
hgroup.long 0x80C++0x03
hide.long 0x00 "GICD_ITARGETSR3,Interrupt Processor Targets Register 3"
hgroup.long 0x810++0x03
hide.long 0x00 "GICD_ITARGETSR4,Interrupt Processor Targets Register 4"
hgroup.long 0x814++0x03
hide.long 0x00 "GICD_ITARGETSR5,Interrupt Processor Targets Register 5"
hgroup.long 0x818++0x03
hide.long 0x00 "GICD_ITARGETSR6,Interrupt Processor Targets Register 6"
hgroup.long 0x81C++0x03
hide.long 0x00 "GICD_ITARGETSR7,Interrupt Processor Targets Register 7"
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01)
group.long 0x820++0x03
line.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO35   ,CPU Targets Byte Offset 35  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO34   ,CPU Targets Byte Offset 34  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO33   ,CPU Targets Byte Offset 33  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO32   ,CPU Targets Byte Offset 32  "
group.long 0x824++0x03
line.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO39   ,CPU Targets Byte Offset 39  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO38   ,CPU Targets Byte Offset 38  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO37   ,CPU Targets Byte Offset 37  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO36   ,CPU Targets Byte Offset 36  "
group.long 0x828++0x03
line.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO43   ,CPU Targets Byte Offset 43  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO42   ,CPU Targets Byte Offset 42  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO41   ,CPU Targets Byte Offset 41  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO40   ,CPU Targets Byte Offset 40  "
group.long 0x82C++0x03
line.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO47   ,CPU Targets Byte Offset 47  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO46   ,CPU Targets Byte Offset 46  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO45   ,CPU Targets Byte Offset 45  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO44   ,CPU Targets Byte Offset 44  "
group.long 0x830++0x03
line.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO51   ,CPU Targets Byte Offset 51  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO50   ,CPU Targets Byte Offset 50  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO49   ,CPU Targets Byte Offset 49  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO48   ,CPU Targets Byte Offset 48  "
group.long 0x834++0x03
line.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO55   ,CPU Targets Byte Offset 55  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO54   ,CPU Targets Byte Offset 54  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO53   ,CPU Targets Byte Offset 53  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO52   ,CPU Targets Byte Offset 52  "
group.long 0x838++0x03
line.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO59   ,CPU Targets Byte Offset 59  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO58   ,CPU Targets Byte Offset 58  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO57   ,CPU Targets Byte Offset 57  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO56   ,CPU Targets Byte Offset 56  "
group.long 0x83C++0x03
line.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO63   ,CPU Targets Byte Offset 63  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO62   ,CPU Targets Byte Offset 62  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO61   ,CPU Targets Byte Offset 61  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO60   ,CPU Targets Byte Offset 60  "
else
hgroup.long 0x820++0x03
hide.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8"
hgroup.long 0x824++0x03
hide.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9"
hgroup.long 0x828++0x03
hide.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10"
hgroup.long 0x82C++0x03
hide.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11"
hgroup.long 0x830++0x03
hide.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12"
hgroup.long 0x834++0x03
hide.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13"
hgroup.long 0x838++0x03
hide.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14"
hgroup.long 0x83C++0x03
hide.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02)
group.long 0x840++0x03
line.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO67   ,CPU Targets Byte Offset 67  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO66   ,CPU Targets Byte Offset 66  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO65   ,CPU Targets Byte Offset 65  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO64   ,CPU Targets Byte Offset 64  "
group.long 0x844++0x03
line.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO71   ,CPU Targets Byte Offset 71  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO70   ,CPU Targets Byte Offset 70  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO69   ,CPU Targets Byte Offset 69  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO68   ,CPU Targets Byte Offset 68  "
group.long 0x848++0x03
line.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO75   ,CPU Targets Byte Offset 75  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO74   ,CPU Targets Byte Offset 74  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO73   ,CPU Targets Byte Offset 73  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO72   ,CPU Targets Byte Offset 72  "
group.long 0x84C++0x03
line.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO79   ,CPU Targets Byte Offset 79  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO78   ,CPU Targets Byte Offset 78  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO77   ,CPU Targets Byte Offset 77  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO76   ,CPU Targets Byte Offset 76  "
group.long 0x850++0x03
line.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO83   ,CPU Targets Byte Offset 83  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO82   ,CPU Targets Byte Offset 82  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO81   ,CPU Targets Byte Offset 81  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO80   ,CPU Targets Byte Offset 80  "
group.long 0x854++0x03
line.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO87   ,CPU Targets Byte Offset 87  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO86   ,CPU Targets Byte Offset 86  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO85   ,CPU Targets Byte Offset 85  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO84   ,CPU Targets Byte Offset 84  "
group.long 0x858++0x03
line.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO91   ,CPU Targets Byte Offset 91  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO90   ,CPU Targets Byte Offset 90  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO89   ,CPU Targets Byte Offset 89  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO88   ,CPU Targets Byte Offset 88  "
group.long 0x85C++0x03
line.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO95   ,CPU Targets Byte Offset 95  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO94   ,CPU Targets Byte Offset 94  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO93   ,CPU Targets Byte Offset 93  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO92   ,CPU Targets Byte Offset 92  "
else
hgroup.long 0x840++0x03
hide.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16"
hgroup.long 0x844++0x03
hide.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17"
hgroup.long 0x848++0x03
hide.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18"
hgroup.long 0x84C++0x03
hide.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19"
hgroup.long 0x850++0x03
hide.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20"
hgroup.long 0x854++0x03
hide.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21"
hgroup.long 0x858++0x03
hide.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22"
hgroup.long 0x85C++0x03
hide.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03)
group.long 0x860++0x03
line.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO99   ,CPU Targets Byte Offset 99  "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO98   ,CPU Targets Byte Offset 98  "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO97   ,CPU Targets Byte Offset 97  "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO96   ,CPU Targets Byte Offset 96  "
group.long 0x864++0x03
line.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO103  ,CPU Targets Byte Offset 103 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO102  ,CPU Targets Byte Offset 102 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO101  ,CPU Targets Byte Offset 101 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO100  ,CPU Targets Byte Offset 100 "
group.long 0x868++0x03
line.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO107  ,CPU Targets Byte Offset 107 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO106  ,CPU Targets Byte Offset 106 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO105  ,CPU Targets Byte Offset 105 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO104  ,CPU Targets Byte Offset 104 "
group.long 0x86C++0x03
line.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO111  ,CPU Targets Byte Offset 111 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO110  ,CPU Targets Byte Offset 110 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO109  ,CPU Targets Byte Offset 109 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO108  ,CPU Targets Byte Offset 108 "
group.long 0x870++0x03
line.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO115  ,CPU Targets Byte Offset 115 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO114  ,CPU Targets Byte Offset 114 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO113  ,CPU Targets Byte Offset 113 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO112  ,CPU Targets Byte Offset 112 "
group.long 0x874++0x03
line.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO119  ,CPU Targets Byte Offset 119 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO118  ,CPU Targets Byte Offset 118 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO117  ,CPU Targets Byte Offset 117 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO116  ,CPU Targets Byte Offset 116 "
group.long 0x878++0x03
line.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO123  ,CPU Targets Byte Offset 123 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO122  ,CPU Targets Byte Offset 122 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO121  ,CPU Targets Byte Offset 121 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO120  ,CPU Targets Byte Offset 120 "
group.long 0x87C++0x03
line.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO127  ,CPU Targets Byte Offset 127 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO126  ,CPU Targets Byte Offset 126 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO125  ,CPU Targets Byte Offset 125 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO124  ,CPU Targets Byte Offset 124 "
else
hgroup.long 0x860++0x03
hide.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24"
hgroup.long 0x864++0x03
hide.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25"
hgroup.long 0x868++0x03
hide.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26"
hgroup.long 0x86C++0x03
hide.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27"
hgroup.long 0x870++0x03
hide.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28"
hgroup.long 0x874++0x03
hide.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29"
hgroup.long 0x878++0x03
hide.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30"
hgroup.long 0x87C++0x03
hide.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04)
group.long 0x880++0x03
line.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO131  ,CPU Targets Byte Offset 131 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO130  ,CPU Targets Byte Offset 130 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO129  ,CPU Targets Byte Offset 129 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO128  ,CPU Targets Byte Offset 128 "
group.long 0x884++0x03
line.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO135  ,CPU Targets Byte Offset 135 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO134  ,CPU Targets Byte Offset 134 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO133  ,CPU Targets Byte Offset 133 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO132  ,CPU Targets Byte Offset 132 "
group.long 0x888++0x03
line.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO139  ,CPU Targets Byte Offset 139 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO138  ,CPU Targets Byte Offset 138 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO137  ,CPU Targets Byte Offset 137 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO136  ,CPU Targets Byte Offset 136 "
group.long 0x88C++0x03
line.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO143  ,CPU Targets Byte Offset 143 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO142  ,CPU Targets Byte Offset 142 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO141  ,CPU Targets Byte Offset 141 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO140  ,CPU Targets Byte Offset 140 "
group.long 0x890++0x03
line.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO147  ,CPU Targets Byte Offset 147 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO146  ,CPU Targets Byte Offset 146 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO145  ,CPU Targets Byte Offset 145 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO144  ,CPU Targets Byte Offset 144 "
group.long 0x894++0x03
line.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO151  ,CPU Targets Byte Offset 151 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO150  ,CPU Targets Byte Offset 150 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO149  ,CPU Targets Byte Offset 149 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO148  ,CPU Targets Byte Offset 148 "
group.long 0x898++0x03
line.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO155  ,CPU Targets Byte Offset 155 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO154  ,CPU Targets Byte Offset 154 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO153  ,CPU Targets Byte Offset 153 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO152  ,CPU Targets Byte Offset 152 "
group.long 0x89C++0x03
line.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO159  ,CPU Targets Byte Offset 159 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO158  ,CPU Targets Byte Offset 158 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO157  ,CPU Targets Byte Offset 157 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO156  ,CPU Targets Byte Offset 156 "
else
hgroup.long 0x880++0x03
hide.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32"
hgroup.long 0x884++0x03
hide.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33"
hgroup.long 0x888++0x03
hide.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34"
hgroup.long 0x88C++0x03
hide.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35"
hgroup.long 0x890++0x03
hide.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36"
hgroup.long 0x894++0x03
hide.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37"
hgroup.long 0x898++0x03
hide.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38"
hgroup.long 0x89C++0x03
hide.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05)
group.long 0x8A0++0x03
line.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO163  ,CPU Targets Byte Offset 163 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO162  ,CPU Targets Byte Offset 162 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO161  ,CPU Targets Byte Offset 161 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO160  ,CPU Targets Byte Offset 160 "
group.long 0x8A4++0x03
line.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO167  ,CPU Targets Byte Offset 167 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO166  ,CPU Targets Byte Offset 166 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO165  ,CPU Targets Byte Offset 165 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO164  ,CPU Targets Byte Offset 164 "
group.long 0x8A8++0x03
line.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO171  ,CPU Targets Byte Offset 171 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO170  ,CPU Targets Byte Offset 170 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO169  ,CPU Targets Byte Offset 169 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO168  ,CPU Targets Byte Offset 168 "
group.long 0x8AC++0x03
line.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO175  ,CPU Targets Byte Offset 175 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO174  ,CPU Targets Byte Offset 174 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO173  ,CPU Targets Byte Offset 173 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO172  ,CPU Targets Byte Offset 172 "
group.long 0x8B0++0x03
line.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO179  ,CPU Targets Byte Offset 179 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO178  ,CPU Targets Byte Offset 178 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO177  ,CPU Targets Byte Offset 177 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO176  ,CPU Targets Byte Offset 176 "
group.long 0x8B4++0x03
line.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO183  ,CPU Targets Byte Offset 183 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO182  ,CPU Targets Byte Offset 182 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO181  ,CPU Targets Byte Offset 181 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO180  ,CPU Targets Byte Offset 180 "
group.long 0x8B8++0x03
line.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO187  ,CPU Targets Byte Offset 187 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO186  ,CPU Targets Byte Offset 186 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO185  ,CPU Targets Byte Offset 185 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO184  ,CPU Targets Byte Offset 184 "
group.long 0x8BC++0x03
line.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO191  ,CPU Targets Byte Offset 191 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO190  ,CPU Targets Byte Offset 190 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO189  ,CPU Targets Byte Offset 189 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO188  ,CPU Targets Byte Offset 188 "
else
hgroup.long 0x8A0++0x03
hide.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40"
hgroup.long 0x8A4++0x03
hide.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41"
hgroup.long 0x8A8++0x03
hide.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42"
hgroup.long 0x8AC++0x03
hide.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43"
hgroup.long 0x8B0++0x03
hide.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44"
hgroup.long 0x8B4++0x03
hide.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45"
hgroup.long 0x8B8++0x03
hide.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46"
hgroup.long 0x8BC++0x03
hide.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06)
group.long 0x8C0++0x03
line.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO195  ,CPU Targets Byte Offset 195 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO194  ,CPU Targets Byte Offset 194 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO193  ,CPU Targets Byte Offset 193 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO192  ,CPU Targets Byte Offset 192 "
group.long 0x8C4++0x03
line.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO199  ,CPU Targets Byte Offset 199 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO198  ,CPU Targets Byte Offset 198 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO197  ,CPU Targets Byte Offset 197 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO196  ,CPU Targets Byte Offset 196 "
group.long 0x8C8++0x03
line.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO203  ,CPU Targets Byte Offset 203 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO202  ,CPU Targets Byte Offset 202 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO201  ,CPU Targets Byte Offset 201 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO200  ,CPU Targets Byte Offset 200 "
group.long 0x8CC++0x03
line.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO207  ,CPU Targets Byte Offset 207 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO206  ,CPU Targets Byte Offset 206 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO205  ,CPU Targets Byte Offset 205 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO204  ,CPU Targets Byte Offset 204 "
group.long 0x8D0++0x03
line.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO211  ,CPU Targets Byte Offset 211 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO210  ,CPU Targets Byte Offset 210 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO209  ,CPU Targets Byte Offset 209 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO208  ,CPU Targets Byte Offset 208 "
group.long 0x8D4++0x03
line.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO215  ,CPU Targets Byte Offset 215 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO214  ,CPU Targets Byte Offset 214 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO213  ,CPU Targets Byte Offset 213 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO212  ,CPU Targets Byte Offset 212 "
group.long 0x8D8++0x03
line.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO219  ,CPU Targets Byte Offset 219 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO218  ,CPU Targets Byte Offset 218 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO217  ,CPU Targets Byte Offset 217 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO216  ,CPU Targets Byte Offset 216 "
group.long 0x8DC++0x03
line.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO223  ,CPU Targets Byte Offset 223 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO222  ,CPU Targets Byte Offset 222 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO221  ,CPU Targets Byte Offset 221 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO220  ,CPU Targets Byte Offset 220 "
else
hgroup.long 0x8C0++0x03
hide.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48"
hgroup.long 0x8C4++0x03
hide.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49"
hgroup.long 0x8C8++0x03
hide.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50"
hgroup.long 0x8CC++0x03
hide.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51"
hgroup.long 0x8D0++0x03
hide.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52"
hgroup.long 0x8D4++0x03
hide.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53"
hgroup.long 0x8D8++0x03
hide.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54"
hgroup.long 0x8DC++0x03
hide.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07)
group.long 0x8E0++0x03
line.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO227  ,CPU Targets Byte Offset 227 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO226  ,CPU Targets Byte Offset 226 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO225  ,CPU Targets Byte Offset 225 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO224  ,CPU Targets Byte Offset 224 "
group.long 0x8E4++0x03
line.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO231  ,CPU Targets Byte Offset 231 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO230  ,CPU Targets Byte Offset 230 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO229  ,CPU Targets Byte Offset 229 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO228  ,CPU Targets Byte Offset 228 "
group.long 0x8E8++0x03
line.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO235  ,CPU Targets Byte Offset 235 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO234  ,CPU Targets Byte Offset 234 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO233  ,CPU Targets Byte Offset 233 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO232  ,CPU Targets Byte Offset 232 "
group.long 0x8EC++0x03
line.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO239  ,CPU Targets Byte Offset 239 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO238  ,CPU Targets Byte Offset 238 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO237  ,CPU Targets Byte Offset 237 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO236  ,CPU Targets Byte Offset 236 "
group.long 0x8F0++0x03
line.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO243  ,CPU Targets Byte Offset 243 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO242  ,CPU Targets Byte Offset 242 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO241  ,CPU Targets Byte Offset 241 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO240  ,CPU Targets Byte Offset 240 "
group.long 0x8F4++0x03
line.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO247  ,CPU Targets Byte Offset 247 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO246  ,CPU Targets Byte Offset 246 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO245  ,CPU Targets Byte Offset 245 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO244  ,CPU Targets Byte Offset 244 "
group.long 0x8F8++0x03
line.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO251  ,CPU Targets Byte Offset 251 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO250  ,CPU Targets Byte Offset 250 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO249  ,CPU Targets Byte Offset 249 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO248  ,CPU Targets Byte Offset 248 "
group.long 0x8FC++0x03
line.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO255  ,CPU Targets Byte Offset 255 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO254  ,CPU Targets Byte Offset 254 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO253  ,CPU Targets Byte Offset 253 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO252  ,CPU Targets Byte Offset 252 "
else
hgroup.long 0x8E0++0x03
hide.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56"
hgroup.long 0x8E4++0x03
hide.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57"
hgroup.long 0x8E8++0x03
hide.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58"
hgroup.long 0x8EC++0x03
hide.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59"
hgroup.long 0x8F0++0x03
hide.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60"
hgroup.long 0x8F4++0x03
hide.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61"
hgroup.long 0x8F8++0x03
hide.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62"
hgroup.long 0x8FC++0x03
hide.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08)
group.long 0x900++0x03
line.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO259  ,CPU Targets Byte Offset 259 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO258  ,CPU Targets Byte Offset 258 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO257  ,CPU Targets Byte Offset 257 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO256  ,CPU Targets Byte Offset 256 "
group.long 0x904++0x03
line.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO263  ,CPU Targets Byte Offset 263 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO262  ,CPU Targets Byte Offset 262 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO261  ,CPU Targets Byte Offset 261 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO260  ,CPU Targets Byte Offset 260 "
group.long 0x908++0x03
line.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO267  ,CPU Targets Byte Offset 267 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO266  ,CPU Targets Byte Offset 266 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO265  ,CPU Targets Byte Offset 265 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO264  ,CPU Targets Byte Offset 264 "
group.long 0x90C++0x03
line.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO271  ,CPU Targets Byte Offset 271 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO270  ,CPU Targets Byte Offset 270 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO269  ,CPU Targets Byte Offset 269 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO268  ,CPU Targets Byte Offset 268 "
group.long 0x910++0x03
line.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO275  ,CPU Targets Byte Offset 275 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO274  ,CPU Targets Byte Offset 274 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO273  ,CPU Targets Byte Offset 273 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO272  ,CPU Targets Byte Offset 272 "
group.long 0x914++0x03
line.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO279  ,CPU Targets Byte Offset 279 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO278  ,CPU Targets Byte Offset 278 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO277  ,CPU Targets Byte Offset 277 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO276  ,CPU Targets Byte Offset 276 "
group.long 0x918++0x03
line.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO283  ,CPU Targets Byte Offset 283 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO282  ,CPU Targets Byte Offset 282 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO281  ,CPU Targets Byte Offset 281 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO280  ,CPU Targets Byte Offset 280 "
group.long 0x91C++0x03
line.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO287  ,CPU Targets Byte Offset 287 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO286  ,CPU Targets Byte Offset 286 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO285  ,CPU Targets Byte Offset 285 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO284  ,CPU Targets Byte Offset 284 "
else
hgroup.long 0x900++0x03
hide.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64"
hgroup.long 0x904++0x03
hide.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65"
hgroup.long 0x908++0x03
hide.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66"
hgroup.long 0x90C++0x03
hide.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67"
hgroup.long 0x910++0x03
hide.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68"
hgroup.long 0x914++0x03
hide.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69"
hgroup.long 0x918++0x03
hide.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70"
hgroup.long 0x91C++0x03
hide.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09)
group.long 0x920++0x03
line.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO291  ,CPU Targets Byte Offset 291 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO290  ,CPU Targets Byte Offset 290 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO289  ,CPU Targets Byte Offset 289 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO288  ,CPU Targets Byte Offset 288 "
group.long 0x924++0x03
line.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO295  ,CPU Targets Byte Offset 295 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO294  ,CPU Targets Byte Offset 294 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO293  ,CPU Targets Byte Offset 293 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO292  ,CPU Targets Byte Offset 292 "
group.long 0x928++0x03
line.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO299  ,CPU Targets Byte Offset 299 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO298  ,CPU Targets Byte Offset 298 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO297  ,CPU Targets Byte Offset 297 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO296  ,CPU Targets Byte Offset 296 "
group.long 0x92C++0x03
line.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO303  ,CPU Targets Byte Offset 303 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO302  ,CPU Targets Byte Offset 302 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO301  ,CPU Targets Byte Offset 301 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO300  ,CPU Targets Byte Offset 300 "
group.long 0x930++0x03
line.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO307  ,CPU Targets Byte Offset 307 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO306  ,CPU Targets Byte Offset 306 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO305  ,CPU Targets Byte Offset 305 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO304  ,CPU Targets Byte Offset 304 "
group.long 0x934++0x03
line.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO311  ,CPU Targets Byte Offset 311 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO310  ,CPU Targets Byte Offset 310 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO309  ,CPU Targets Byte Offset 309 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO308  ,CPU Targets Byte Offset 308 "
group.long 0x938++0x03
line.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO315  ,CPU Targets Byte Offset 315 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO314  ,CPU Targets Byte Offset 314 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO313  ,CPU Targets Byte Offset 313 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO312  ,CPU Targets Byte Offset 312 "
group.long 0x93C++0x03
line.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO319  ,CPU Targets Byte Offset 319 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO318  ,CPU Targets Byte Offset 318 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO317  ,CPU Targets Byte Offset 317 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO316  ,CPU Targets Byte Offset 316 "
else
hgroup.long 0x920++0x03
hide.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72"
hgroup.long 0x924++0x03
hide.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73"
hgroup.long 0x928++0x03
hide.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74"
hgroup.long 0x92C++0x03
hide.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75"
hgroup.long 0x930++0x03
hide.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76"
hgroup.long 0x934++0x03
hide.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77"
hgroup.long 0x938++0x03
hide.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78"
hgroup.long 0x93C++0x03
hide.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A)
group.long 0x940++0x03
line.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO323  ,CPU Targets Byte Offset 323 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO322  ,CPU Targets Byte Offset 322 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO321  ,CPU Targets Byte Offset 321 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO320  ,CPU Targets Byte Offset 320 "
group.long 0x944++0x03
line.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO327  ,CPU Targets Byte Offset 327 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO326  ,CPU Targets Byte Offset 326 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO325  ,CPU Targets Byte Offset 325 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO324  ,CPU Targets Byte Offset 324 "
group.long 0x948++0x03
line.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO331  ,CPU Targets Byte Offset 331 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO330  ,CPU Targets Byte Offset 330 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO329  ,CPU Targets Byte Offset 329 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO328  ,CPU Targets Byte Offset 328 "
group.long 0x94C++0x03
line.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO335  ,CPU Targets Byte Offset 335 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO334  ,CPU Targets Byte Offset 334 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO333  ,CPU Targets Byte Offset 333 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO332  ,CPU Targets Byte Offset 332 "
group.long 0x950++0x03
line.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO339  ,CPU Targets Byte Offset 339 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO338  ,CPU Targets Byte Offset 338 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO337  ,CPU Targets Byte Offset 337 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO336  ,CPU Targets Byte Offset 336 "
group.long 0x954++0x03
line.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO343  ,CPU Targets Byte Offset 343 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO342  ,CPU Targets Byte Offset 342 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO341  ,CPU Targets Byte Offset 341 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO340  ,CPU Targets Byte Offset 340 "
group.long 0x958++0x03
line.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO347  ,CPU Targets Byte Offset 347 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO346  ,CPU Targets Byte Offset 346 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO345  ,CPU Targets Byte Offset 345 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO344  ,CPU Targets Byte Offset 344 "
group.long 0x95C++0x03
line.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO351  ,CPU Targets Byte Offset 351 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO350  ,CPU Targets Byte Offset 350 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO349  ,CPU Targets Byte Offset 349 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO348  ,CPU Targets Byte Offset 348 "
else
hgroup.long 0x940++0x03
hide.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80"
hgroup.long 0x944++0x03
hide.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81"
hgroup.long 0x948++0x03
hide.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82"
hgroup.long 0x94C++0x03
hide.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83"
hgroup.long 0x950++0x03
hide.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84"
hgroup.long 0x954++0x03
hide.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85"
hgroup.long 0x958++0x03
hide.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86"
hgroup.long 0x95C++0x03
hide.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B)
group.long 0x960++0x03
line.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO355  ,CPU Targets Byte Offset 355 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO354  ,CPU Targets Byte Offset 354 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO353  ,CPU Targets Byte Offset 353 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO352  ,CPU Targets Byte Offset 352 "
group.long 0x964++0x03
line.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO359  ,CPU Targets Byte Offset 359 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO358  ,CPU Targets Byte Offset 358 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO357  ,CPU Targets Byte Offset 357 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO356  ,CPU Targets Byte Offset 356 "
group.long 0x968++0x03
line.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO363  ,CPU Targets Byte Offset 363 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO362  ,CPU Targets Byte Offset 362 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO361  ,CPU Targets Byte Offset 361 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO360  ,CPU Targets Byte Offset 360 "
group.long 0x96C++0x03
line.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO367  ,CPU Targets Byte Offset 367 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO366  ,CPU Targets Byte Offset 366 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO365  ,CPU Targets Byte Offset 365 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO364  ,CPU Targets Byte Offset 364 "
group.long 0x970++0x03
line.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO371  ,CPU Targets Byte Offset 371 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO370  ,CPU Targets Byte Offset 370 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO369  ,CPU Targets Byte Offset 369 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO368  ,CPU Targets Byte Offset 368 "
group.long 0x974++0x03
line.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO375  ,CPU Targets Byte Offset 375 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO374  ,CPU Targets Byte Offset 374 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO373  ,CPU Targets Byte Offset 373 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO372  ,CPU Targets Byte Offset 372 "
group.long 0x978++0x03
line.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO379  ,CPU Targets Byte Offset 379 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO378  ,CPU Targets Byte Offset 378 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO377  ,CPU Targets Byte Offset 377 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO376  ,CPU Targets Byte Offset 376 "
group.long 0x97C++0x03
line.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO383  ,CPU Targets Byte Offset 383 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO382  ,CPU Targets Byte Offset 382 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO381  ,CPU Targets Byte Offset 381 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO380  ,CPU Targets Byte Offset 380 "
else
hgroup.long 0x960++0x03
hide.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88"
hgroup.long 0x964++0x03
hide.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89"
hgroup.long 0x968++0x03
hide.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90"
hgroup.long 0x96C++0x03
hide.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91"
hgroup.long 0x970++0x03
hide.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92"
hgroup.long 0x974++0x03
hide.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93"
hgroup.long 0x978++0x03
hide.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94"
hgroup.long 0x97C++0x03
hide.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C)
group.long 0x980++0x03
line.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO387  ,CPU Targets Byte Offset 387 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO386  ,CPU Targets Byte Offset 386 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO385  ,CPU Targets Byte Offset 385 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO384  ,CPU Targets Byte Offset 384 "
group.long 0x984++0x03
line.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO391  ,CPU Targets Byte Offset 391 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO390  ,CPU Targets Byte Offset 390 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO389  ,CPU Targets Byte Offset 389 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO388  ,CPU Targets Byte Offset 388 "
group.long 0x988++0x03
line.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO395  ,CPU Targets Byte Offset 395 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO394  ,CPU Targets Byte Offset 394 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO393  ,CPU Targets Byte Offset 393 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO392  ,CPU Targets Byte Offset 392 "
group.long 0x98C++0x03
line.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO399  ,CPU Targets Byte Offset 399 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO398  ,CPU Targets Byte Offset 398 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO397  ,CPU Targets Byte Offset 397 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO396  ,CPU Targets Byte Offset 396 "
group.long 0x990++0x03
line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO403  ,CPU Targets Byte Offset 403 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO402  ,CPU Targets Byte Offset 402 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO401  ,CPU Targets Byte Offset 401 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO400  ,CPU Targets Byte Offset 400 "
group.long 0x994++0x03
line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO407  ,CPU Targets Byte Offset 407 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO406  ,CPU Targets Byte Offset 406 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO405  ,CPU Targets Byte Offset 405 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO404  ,CPU Targets Byte Offset 404 "
group.long 0x998++0x03
line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO411  ,CPU Targets Byte Offset 411 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO410  ,CPU Targets Byte Offset 410 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO409  ,CPU Targets Byte Offset 409 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO408  ,CPU Targets Byte Offset 408 "
group.long 0x99C++0x03
line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO415  ,CPU Targets Byte Offset 415 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO414  ,CPU Targets Byte Offset 414 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO413  ,CPU Targets Byte Offset 413 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO412  ,CPU Targets Byte Offset 412 "
else
hgroup.long 0x980++0x03
hide.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96"
hgroup.long 0x984++0x03
hide.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97"
hgroup.long 0x988++0x03
hide.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98"
hgroup.long 0x98C++0x03
hide.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99"
hgroup.long 0x990++0x03
hide.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100"
hgroup.long 0x994++0x03
hide.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101"
hgroup.long 0x998++0x03
hide.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102"
hgroup.long 0x99C++0x03
hide.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D)
group.long 0x9A0++0x03
line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO419  ,CPU Targets Byte Offset 419 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO418  ,CPU Targets Byte Offset 418 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO417  ,CPU Targets Byte Offset 417 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO416  ,CPU Targets Byte Offset 416 "
group.long 0x9A4++0x03
line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO423  ,CPU Targets Byte Offset 423 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO422  ,CPU Targets Byte Offset 422 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO421  ,CPU Targets Byte Offset 421 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO420  ,CPU Targets Byte Offset 420 "
group.long 0x9A8++0x03
line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO427  ,CPU Targets Byte Offset 427 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO426  ,CPU Targets Byte Offset 426 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO425  ,CPU Targets Byte Offset 425 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO424  ,CPU Targets Byte Offset 424 "
group.long 0x9AC++0x03
line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO431  ,CPU Targets Byte Offset 431 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO430  ,CPU Targets Byte Offset 430 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO429  ,CPU Targets Byte Offset 429 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO428  ,CPU Targets Byte Offset 428 "
group.long 0x9B0++0x03
line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO435  ,CPU Targets Byte Offset 435 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO434  ,CPU Targets Byte Offset 434 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO433  ,CPU Targets Byte Offset 433 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO432  ,CPU Targets Byte Offset 432 "
group.long 0x9B4++0x03
line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO439  ,CPU Targets Byte Offset 439 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO438  ,CPU Targets Byte Offset 438 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO437  ,CPU Targets Byte Offset 437 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO436  ,CPU Targets Byte Offset 436 "
group.long 0x9B8++0x03
line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO443  ,CPU Targets Byte Offset 443 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO442  ,CPU Targets Byte Offset 442 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO441  ,CPU Targets Byte Offset 441 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO440  ,CPU Targets Byte Offset 440 "
group.long 0x9BC++0x03
line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO447  ,CPU Targets Byte Offset 447 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO446  ,CPU Targets Byte Offset 446 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO445  ,CPU Targets Byte Offset 445 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO444  ,CPU Targets Byte Offset 444 "
else
hgroup.long 0x9A0++0x03
hide.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104"
hgroup.long 0x9A4++0x03
hide.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105"
hgroup.long 0x9A8++0x03
hide.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106"
hgroup.long 0x9AC++0x03
hide.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107"
hgroup.long 0x9B0++0x03
hide.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108"
hgroup.long 0x9B4++0x03
hide.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109"
hgroup.long 0x9B8++0x03
hide.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110"
hgroup.long 0x9BC++0x03
hide.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E)
group.long 0x9C0++0x03
line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO451  ,CPU Targets Byte Offset 451 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO450  ,CPU Targets Byte Offset 450 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO449  ,CPU Targets Byte Offset 449 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO448  ,CPU Targets Byte Offset 448 "
group.long 0x9C4++0x03
line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO455  ,CPU Targets Byte Offset 455 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO454  ,CPU Targets Byte Offset 454 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO453  ,CPU Targets Byte Offset 453 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO452  ,CPU Targets Byte Offset 452 "
group.long 0x9C8++0x03
line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO459  ,CPU Targets Byte Offset 459 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO458  ,CPU Targets Byte Offset 458 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO457  ,CPU Targets Byte Offset 457 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO456  ,CPU Targets Byte Offset 456 "
group.long 0x9CC++0x03
line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO463  ,CPU Targets Byte Offset 463 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO462  ,CPU Targets Byte Offset 462 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO461  ,CPU Targets Byte Offset 461 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO460  ,CPU Targets Byte Offset 460 "
group.long 0x9D0++0x03
line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO467  ,CPU Targets Byte Offset 467 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO466  ,CPU Targets Byte Offset 466 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO465  ,CPU Targets Byte Offset 465 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO464  ,CPU Targets Byte Offset 464 "
group.long 0x9D4++0x03
line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO471  ,CPU Targets Byte Offset 471 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO470  ,CPU Targets Byte Offset 470 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO469  ,CPU Targets Byte Offset 469 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO468  ,CPU Targets Byte Offset 468 "
group.long 0x9D8++0x03
line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO475  ,CPU Targets Byte Offset 475 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO474  ,CPU Targets Byte Offset 474 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO473  ,CPU Targets Byte Offset 473 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO472  ,CPU Targets Byte Offset 472 "
group.long 0x9DC++0x03
line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO479  ,CPU Targets Byte Offset 479 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO478  ,CPU Targets Byte Offset 478 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO477  ,CPU Targets Byte Offset 477 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO476  ,CPU Targets Byte Offset 476 "
else
hgroup.long 0x9C0++0x03
hide.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112"
hgroup.long 0x9C4++0x03
hide.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113"
hgroup.long 0x9C8++0x03
hide.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114"
hgroup.long 0x9CC++0x03
hide.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115"
hgroup.long 0x9D0++0x03
hide.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116"
hgroup.long 0x9D4++0x03
hide.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117"
hgroup.long 0x9D8++0x03
hide.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118"
hgroup.long 0x9DC++0x03
hide.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F)
group.long 0x9E0++0x03
line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO483  ,CPU Targets Byte Offset 483 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO482  ,CPU Targets Byte Offset 482 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO481  ,CPU Targets Byte Offset 481 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO480  ,CPU Targets Byte Offset 480 "
group.long 0x9E4++0x03
line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO487  ,CPU Targets Byte Offset 487 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO486  ,CPU Targets Byte Offset 486 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO485  ,CPU Targets Byte Offset 485 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO484  ,CPU Targets Byte Offset 484 "
group.long 0x9E8++0x03
line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO491  ,CPU Targets Byte Offset 491 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO490  ,CPU Targets Byte Offset 490 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO489  ,CPU Targets Byte Offset 489 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO488  ,CPU Targets Byte Offset 488 "
group.long 0x9EC++0x03
line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO495  ,CPU Targets Byte Offset 495 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO494  ,CPU Targets Byte Offset 494 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO493  ,CPU Targets Byte Offset 493 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO492  ,CPU Targets Byte Offset 492 "
group.long 0x9F0++0x03
line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO499  ,CPU Targets Byte Offset 499 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO498  ,CPU Targets Byte Offset 498 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO497  ,CPU Targets Byte Offset 497 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO496  ,CPU Targets Byte Offset 496 "
group.long 0x9F4++0x03
line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO503  ,CPU Targets Byte Offset 503 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO502  ,CPU Targets Byte Offset 502 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO501  ,CPU Targets Byte Offset 501 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO500  ,CPU Targets Byte Offset 500 "
group.long 0x9F8++0x03
line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO507  ,CPU Targets Byte Offset 507 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO506  ,CPU Targets Byte Offset 506 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO505  ,CPU Targets Byte Offset 505 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO504  ,CPU Targets Byte Offset 504 "
group.long 0x9FC++0x03
line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO511  ,CPU Targets Byte Offset 511 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO510  ,CPU Targets Byte Offset 510 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO509  ,CPU Targets Byte Offset 509 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO508  ,CPU Targets Byte Offset 508 "
else
hgroup.long 0x9E0++0x03
hide.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120"
hgroup.long 0x9E4++0x03
hide.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121"
hgroup.long 0x9E8++0x03
hide.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122"
hgroup.long 0x9EC++0x03
hide.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123"
hgroup.long 0x9F0++0x03
hide.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124"
hgroup.long 0x9F4++0x03
hide.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125"
hgroup.long 0x9F8++0x03
hide.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126"
hgroup.long 0x9FC++0x03
hide.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)
group.long 0xA00++0x03
line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO515  ,CPU Targets Byte Offset 515 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO514  ,CPU Targets Byte Offset 514 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO513  ,CPU Targets Byte Offset 513 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO512  ,CPU Targets Byte Offset 512 "
group.long 0xA04++0x03
line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO519  ,CPU Targets Byte Offset 519 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO518  ,CPU Targets Byte Offset 518 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO517  ,CPU Targets Byte Offset 517 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO516  ,CPU Targets Byte Offset 516 "
group.long 0xA08++0x03
line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO523  ,CPU Targets Byte Offset 523 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO522  ,CPU Targets Byte Offset 522 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO521  ,CPU Targets Byte Offset 521 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO520  ,CPU Targets Byte Offset 520 "
group.long 0xA0C++0x03
line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO527  ,CPU Targets Byte Offset 527 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO526  ,CPU Targets Byte Offset 526 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO525  ,CPU Targets Byte Offset 525 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO524  ,CPU Targets Byte Offset 524 "
group.long 0xA10++0x03
line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO531  ,CPU Targets Byte Offset 531 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO530  ,CPU Targets Byte Offset 530 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO529  ,CPU Targets Byte Offset 529 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO528  ,CPU Targets Byte Offset 528 "
group.long 0xA14++0x03
line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO535  ,CPU Targets Byte Offset 535 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO534  ,CPU Targets Byte Offset 534 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO533  ,CPU Targets Byte Offset 533 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO532  ,CPU Targets Byte Offset 532 "
group.long 0xA18++0x03
line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO539  ,CPU Targets Byte Offset 539 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO538  ,CPU Targets Byte Offset 538 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO537  ,CPU Targets Byte Offset 537 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO536  ,CPU Targets Byte Offset 536 "
group.long 0xA1C++0x03
line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO543  ,CPU Targets Byte Offset 543 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO542  ,CPU Targets Byte Offset 542 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO541  ,CPU Targets Byte Offset 541 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO540  ,CPU Targets Byte Offset 540 "
else
hgroup.long 0xA00++0x03
hide.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128"
hgroup.long 0xA04++0x03
hide.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129"
hgroup.long 0xA08++0x03
hide.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130"
hgroup.long 0xA0C++0x03
hide.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131"
hgroup.long 0xA10++0x03
hide.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132"
hgroup.long 0xA14++0x03
hide.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133"
hgroup.long 0xA18++0x03
hide.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134"
hgroup.long 0xA1C++0x03
hide.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)
group.long 0xA20++0x03
line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO547  ,CPU Targets Byte Offset 547 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO546  ,CPU Targets Byte Offset 546 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO545  ,CPU Targets Byte Offset 545 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO544  ,CPU Targets Byte Offset 544 "
group.long 0xA24++0x03
line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO551  ,CPU Targets Byte Offset 551 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO550  ,CPU Targets Byte Offset 550 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO549  ,CPU Targets Byte Offset 549 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO548  ,CPU Targets Byte Offset 548 "
group.long 0xA28++0x03
line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO555  ,CPU Targets Byte Offset 555 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO554  ,CPU Targets Byte Offset 554 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO553  ,CPU Targets Byte Offset 553 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO552  ,CPU Targets Byte Offset 552 "
group.long 0xA2C++0x03
line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO559  ,CPU Targets Byte Offset 559 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO558  ,CPU Targets Byte Offset 558 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO557  ,CPU Targets Byte Offset 557 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO556  ,CPU Targets Byte Offset 556 "
group.long 0xA30++0x03
line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO563  ,CPU Targets Byte Offset 563 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO562  ,CPU Targets Byte Offset 562 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO561  ,CPU Targets Byte Offset 561 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO560  ,CPU Targets Byte Offset 560 "
group.long 0xA34++0x03
line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO567  ,CPU Targets Byte Offset 567 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO566  ,CPU Targets Byte Offset 566 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO565  ,CPU Targets Byte Offset 565 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO564  ,CPU Targets Byte Offset 564 "
group.long 0xA38++0x03
line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO571  ,CPU Targets Byte Offset 571 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO570  ,CPU Targets Byte Offset 570 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO569  ,CPU Targets Byte Offset 569 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO568  ,CPU Targets Byte Offset 568 "
group.long 0xA3C++0x03
line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO575  ,CPU Targets Byte Offset 575 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO574  ,CPU Targets Byte Offset 574 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO573  ,CPU Targets Byte Offset 573 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO572  ,CPU Targets Byte Offset 572 "
else
hgroup.long 0xA20++0x03
hide.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136"
hgroup.long 0xA24++0x03
hide.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137"
hgroup.long 0xA28++0x03
hide.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138"
hgroup.long 0xA2C++0x03
hide.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139"
hgroup.long 0xA30++0x03
hide.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140"
hgroup.long 0xA34++0x03
hide.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141"
hgroup.long 0xA38++0x03
hide.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142"
hgroup.long 0xA3C++0x03
hide.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)
group.long 0xA40++0x03
line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO579  ,CPU Targets Byte Offset 579 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO578  ,CPU Targets Byte Offset 578 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO577  ,CPU Targets Byte Offset 577 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO576  ,CPU Targets Byte Offset 576 "
group.long 0xA44++0x03
line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO583  ,CPU Targets Byte Offset 583 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO582  ,CPU Targets Byte Offset 582 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO581  ,CPU Targets Byte Offset 581 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO580  ,CPU Targets Byte Offset 580 "
group.long 0xA48++0x03
line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO587  ,CPU Targets Byte Offset 587 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO586  ,CPU Targets Byte Offset 586 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO585  ,CPU Targets Byte Offset 585 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO584  ,CPU Targets Byte Offset 584 "
group.long 0xA4C++0x03
line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO591  ,CPU Targets Byte Offset 591 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO590  ,CPU Targets Byte Offset 590 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO589  ,CPU Targets Byte Offset 589 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO588  ,CPU Targets Byte Offset 588 "
group.long 0xA50++0x03
line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO595  ,CPU Targets Byte Offset 595 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO594  ,CPU Targets Byte Offset 594 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO593  ,CPU Targets Byte Offset 593 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO592  ,CPU Targets Byte Offset 592 "
group.long 0xA54++0x03
line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO599  ,CPU Targets Byte Offset 599 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO598  ,CPU Targets Byte Offset 598 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO597  ,CPU Targets Byte Offset 597 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO596  ,CPU Targets Byte Offset 596 "
group.long 0xA58++0x03
line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO603  ,CPU Targets Byte Offset 603 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO602  ,CPU Targets Byte Offset 602 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO601  ,CPU Targets Byte Offset 601 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO600  ,CPU Targets Byte Offset 600 "
group.long 0xA5C++0x03
line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO607  ,CPU Targets Byte Offset 607 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO606  ,CPU Targets Byte Offset 606 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO605  ,CPU Targets Byte Offset 605 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO604  ,CPU Targets Byte Offset 604 "
else
hgroup.long 0xA40++0x03
hide.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144"
hgroup.long 0xA44++0x03
hide.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145"
hgroup.long 0xA48++0x03
hide.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146"
hgroup.long 0xA4C++0x03
hide.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147"
hgroup.long 0xA50++0x03
hide.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148"
hgroup.long 0xA54++0x03
hide.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149"
hgroup.long 0xA58++0x03
hide.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150"
hgroup.long 0xA5C++0x03
hide.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)
group.long 0xA60++0x03
line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO611  ,CPU Targets Byte Offset 611 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO610  ,CPU Targets Byte Offset 610 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO609  ,CPU Targets Byte Offset 609 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO608  ,CPU Targets Byte Offset 608 "
group.long 0xA64++0x03
line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO615  ,CPU Targets Byte Offset 615 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO614  ,CPU Targets Byte Offset 614 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO613  ,CPU Targets Byte Offset 613 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO612  ,CPU Targets Byte Offset 612 "
group.long 0xA68++0x03
line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO619  ,CPU Targets Byte Offset 619 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO618  ,CPU Targets Byte Offset 618 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO617  ,CPU Targets Byte Offset 617 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO616  ,CPU Targets Byte Offset 616 "
group.long 0xA6C++0x03
line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO623  ,CPU Targets Byte Offset 623 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO622  ,CPU Targets Byte Offset 622 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO621  ,CPU Targets Byte Offset 621 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO620  ,CPU Targets Byte Offset 620 "
group.long 0xA70++0x03
line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO627  ,CPU Targets Byte Offset 627 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO626  ,CPU Targets Byte Offset 626 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO625  ,CPU Targets Byte Offset 625 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO624  ,CPU Targets Byte Offset 624 "
group.long 0xA74++0x03
line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO631  ,CPU Targets Byte Offset 631 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO630  ,CPU Targets Byte Offset 630 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO629  ,CPU Targets Byte Offset 629 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO628  ,CPU Targets Byte Offset 628 "
group.long 0xA78++0x03
line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO635  ,CPU Targets Byte Offset 635 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO634  ,CPU Targets Byte Offset 634 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO633  ,CPU Targets Byte Offset 633 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO632  ,CPU Targets Byte Offset 632 "
group.long 0xA7C++0x03
line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO639  ,CPU Targets Byte Offset 639 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO638  ,CPU Targets Byte Offset 638 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO637  ,CPU Targets Byte Offset 637 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO636  ,CPU Targets Byte Offset 636 "
else
hgroup.long 0xA60++0x03
hide.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152"
hgroup.long 0xA64++0x03
hide.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153"
hgroup.long 0xA68++0x03
hide.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154"
hgroup.long 0xA6C++0x03
hide.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155"
hgroup.long 0xA70++0x03
hide.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156"
hgroup.long 0xA74++0x03
hide.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157"
hgroup.long 0xA78++0x03
hide.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158"
hgroup.long 0xA7C++0x03
hide.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)
group.long 0xA80++0x03
line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO643  ,CPU Targets Byte Offset 643 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO642  ,CPU Targets Byte Offset 642 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO641  ,CPU Targets Byte Offset 641 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO640  ,CPU Targets Byte Offset 640 "
group.long 0xA84++0x03
line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO647  ,CPU Targets Byte Offset 647 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO646  ,CPU Targets Byte Offset 646 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO645  ,CPU Targets Byte Offset 645 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO644  ,CPU Targets Byte Offset 644 "
group.long 0xA88++0x03
line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO651  ,CPU Targets Byte Offset 651 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO650  ,CPU Targets Byte Offset 650 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO649  ,CPU Targets Byte Offset 649 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO648  ,CPU Targets Byte Offset 648 "
group.long 0xA8C++0x03
line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO655  ,CPU Targets Byte Offset 655 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO654  ,CPU Targets Byte Offset 654 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO653  ,CPU Targets Byte Offset 653 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO652  ,CPU Targets Byte Offset 652 "
group.long 0xA90++0x03
line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO659  ,CPU Targets Byte Offset 659 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO658  ,CPU Targets Byte Offset 658 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO657  ,CPU Targets Byte Offset 657 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO656  ,CPU Targets Byte Offset 656 "
group.long 0xA94++0x03
line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO663  ,CPU Targets Byte Offset 663 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO662  ,CPU Targets Byte Offset 662 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO661  ,CPU Targets Byte Offset 661 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO660  ,CPU Targets Byte Offset 660 "
group.long 0xA98++0x03
line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO667  ,CPU Targets Byte Offset 667 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO666  ,CPU Targets Byte Offset 666 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO665  ,CPU Targets Byte Offset 665 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO664  ,CPU Targets Byte Offset 664 "
group.long 0xA9C++0x03
line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO671  ,CPU Targets Byte Offset 671 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO670  ,CPU Targets Byte Offset 670 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO669  ,CPU Targets Byte Offset 669 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO668  ,CPU Targets Byte Offset 668 "
else
hgroup.long 0xA80++0x03
hide.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160"
hgroup.long 0xA84++0x03
hide.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161"
hgroup.long 0xA88++0x03
hide.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162"
hgroup.long 0xA8C++0x03
hide.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163"
hgroup.long 0xA90++0x03
hide.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164"
hgroup.long 0xA94++0x03
hide.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165"
hgroup.long 0xA98++0x03
hide.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166"
hgroup.long 0xA9C++0x03
hide.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)
group.long 0xAA0++0x03
line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO675  ,CPU Targets Byte Offset 675 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO674  ,CPU Targets Byte Offset 674 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO673  ,CPU Targets Byte Offset 673 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO672  ,CPU Targets Byte Offset 672 "
group.long 0xAA4++0x03
line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO679  ,CPU Targets Byte Offset 679 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO678  ,CPU Targets Byte Offset 678 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO677  ,CPU Targets Byte Offset 677 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO676  ,CPU Targets Byte Offset 676 "
group.long 0xAA8++0x03
line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO683  ,CPU Targets Byte Offset 683 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO682  ,CPU Targets Byte Offset 682 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO681  ,CPU Targets Byte Offset 681 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO680  ,CPU Targets Byte Offset 680 "
group.long 0xAAC++0x03
line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO687  ,CPU Targets Byte Offset 687 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO686  ,CPU Targets Byte Offset 686 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO685  ,CPU Targets Byte Offset 685 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO684  ,CPU Targets Byte Offset 684 "
group.long 0xAB0++0x03
line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO691  ,CPU Targets Byte Offset 691 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO690  ,CPU Targets Byte Offset 690 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO689  ,CPU Targets Byte Offset 689 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO688  ,CPU Targets Byte Offset 688 "
group.long 0xAB4++0x03
line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO695  ,CPU Targets Byte Offset 695 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO694  ,CPU Targets Byte Offset 694 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO693  ,CPU Targets Byte Offset 693 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO692  ,CPU Targets Byte Offset 692 "
group.long 0xAB8++0x03
line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO699  ,CPU Targets Byte Offset 699 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO698  ,CPU Targets Byte Offset 698 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO697  ,CPU Targets Byte Offset 697 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO696  ,CPU Targets Byte Offset 696 "
group.long 0xABC++0x03
line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO703  ,CPU Targets Byte Offset 703 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO702  ,CPU Targets Byte Offset 702 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO701  ,CPU Targets Byte Offset 701 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO700  ,CPU Targets Byte Offset 700 "
else
hgroup.long 0xAA0++0x03
hide.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168"
hgroup.long 0xAA4++0x03
hide.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169"
hgroup.long 0xAA8++0x03
hide.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170"
hgroup.long 0xAAC++0x03
hide.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171"
hgroup.long 0xAB0++0x03
hide.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172"
hgroup.long 0xAB4++0x03
hide.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173"
hgroup.long 0xAB8++0x03
hide.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174"
hgroup.long 0xABC++0x03
hide.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)
group.long 0xAC0++0x03
line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO707  ,CPU Targets Byte Offset 707 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO706  ,CPU Targets Byte Offset 706 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO705  ,CPU Targets Byte Offset 705 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO704  ,CPU Targets Byte Offset 704 "
group.long 0xAC4++0x03
line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO711  ,CPU Targets Byte Offset 711 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO710  ,CPU Targets Byte Offset 710 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO709  ,CPU Targets Byte Offset 709 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO708  ,CPU Targets Byte Offset 708 "
group.long 0xAC8++0x03
line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO715  ,CPU Targets Byte Offset 715 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO714  ,CPU Targets Byte Offset 714 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO713  ,CPU Targets Byte Offset 713 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO712  ,CPU Targets Byte Offset 712 "
group.long 0xACC++0x03
line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO719  ,CPU Targets Byte Offset 719 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO718  ,CPU Targets Byte Offset 718 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO717  ,CPU Targets Byte Offset 717 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO716  ,CPU Targets Byte Offset 716 "
group.long 0xAD0++0x03
line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO723  ,CPU Targets Byte Offset 723 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO722  ,CPU Targets Byte Offset 722 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO721  ,CPU Targets Byte Offset 721 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO720  ,CPU Targets Byte Offset 720 "
group.long 0xAD4++0x03
line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO727  ,CPU Targets Byte Offset 727 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO726  ,CPU Targets Byte Offset 726 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO725  ,CPU Targets Byte Offset 725 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO724  ,CPU Targets Byte Offset 724 "
group.long 0xAD8++0x03
line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO731  ,CPU Targets Byte Offset 731 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO730  ,CPU Targets Byte Offset 730 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO729  ,CPU Targets Byte Offset 729 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO728  ,CPU Targets Byte Offset 728 "
group.long 0xADC++0x03
line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO735  ,CPU Targets Byte Offset 735 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO734  ,CPU Targets Byte Offset 734 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO733  ,CPU Targets Byte Offset 733 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO732  ,CPU Targets Byte Offset 732 "
else
hgroup.long 0xAC0++0x03
hide.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176"
hgroup.long 0xAC4++0x03
hide.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177"
hgroup.long 0xAC8++0x03
hide.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178"
hgroup.long 0xACC++0x03
hide.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179"
hgroup.long 0xAD0++0x03
hide.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180"
hgroup.long 0xAD4++0x03
hide.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181"
hgroup.long 0xAD8++0x03
hide.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182"
hgroup.long 0xADC++0x03
hide.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)
group.long 0xAE0++0x03
line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO739  ,CPU Targets Byte Offset 739 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO738  ,CPU Targets Byte Offset 738 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO737  ,CPU Targets Byte Offset 737 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO736  ,CPU Targets Byte Offset 736 "
group.long 0xAE4++0x03
line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO743  ,CPU Targets Byte Offset 743 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO742  ,CPU Targets Byte Offset 742 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO741  ,CPU Targets Byte Offset 741 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO740  ,CPU Targets Byte Offset 740 "
group.long 0xAE8++0x03
line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO747  ,CPU Targets Byte Offset 747 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO746  ,CPU Targets Byte Offset 746 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO745  ,CPU Targets Byte Offset 745 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO744  ,CPU Targets Byte Offset 744 "
group.long 0xAEC++0x03
line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO751  ,CPU Targets Byte Offset 751 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO750  ,CPU Targets Byte Offset 750 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO749  ,CPU Targets Byte Offset 749 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO748  ,CPU Targets Byte Offset 748 "
group.long 0xAF0++0x03
line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO755  ,CPU Targets Byte Offset 755 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO754  ,CPU Targets Byte Offset 754 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO753  ,CPU Targets Byte Offset 753 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO752  ,CPU Targets Byte Offset 752 "
group.long 0xAF4++0x03
line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO759  ,CPU Targets Byte Offset 759 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO758  ,CPU Targets Byte Offset 758 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO757  ,CPU Targets Byte Offset 757 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO756  ,CPU Targets Byte Offset 756 "
group.long 0xAF8++0x03
line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO763  ,CPU Targets Byte Offset 763 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO762  ,CPU Targets Byte Offset 762 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO761  ,CPU Targets Byte Offset 761 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO760  ,CPU Targets Byte Offset 760 "
group.long 0xAFC++0x03
line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO767  ,CPU Targets Byte Offset 767 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO766  ,CPU Targets Byte Offset 766 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO765  ,CPU Targets Byte Offset 765 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO764  ,CPU Targets Byte Offset 764 "
else
hgroup.long 0xAE0++0x03
hide.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184"
hgroup.long 0xAE4++0x03
hide.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185"
hgroup.long 0xAE8++0x03
hide.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186"
hgroup.long 0xAEC++0x03
hide.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187"
hgroup.long 0xAF0++0x03
hide.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188"
hgroup.long 0xAF4++0x03
hide.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189"
hgroup.long 0xAF8++0x03
hide.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190"
hgroup.long 0xAFC++0x03
hide.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)
group.long 0xB00++0x03
line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO771  ,CPU Targets Byte Offset 771 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO770  ,CPU Targets Byte Offset 770 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO769  ,CPU Targets Byte Offset 769 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO768  ,CPU Targets Byte Offset 768 "
group.long 0xB04++0x03
line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO775  ,CPU Targets Byte Offset 775 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO774  ,CPU Targets Byte Offset 774 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO773  ,CPU Targets Byte Offset 773 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO772  ,CPU Targets Byte Offset 772 "
group.long 0xB08++0x03
line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO779  ,CPU Targets Byte Offset 779 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO778  ,CPU Targets Byte Offset 778 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO777  ,CPU Targets Byte Offset 777 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO776  ,CPU Targets Byte Offset 776 "
group.long 0xB0C++0x03
line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO783  ,CPU Targets Byte Offset 783 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO782  ,CPU Targets Byte Offset 782 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO781  ,CPU Targets Byte Offset 781 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO780  ,CPU Targets Byte Offset 780 "
group.long 0xB10++0x03
line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO787  ,CPU Targets Byte Offset 787 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO786  ,CPU Targets Byte Offset 786 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO785  ,CPU Targets Byte Offset 785 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO784  ,CPU Targets Byte Offset 784 "
group.long 0xB14++0x03
line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO791  ,CPU Targets Byte Offset 791 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO790  ,CPU Targets Byte Offset 790 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO789  ,CPU Targets Byte Offset 789 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO788  ,CPU Targets Byte Offset 788 "
group.long 0xB18++0x03
line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO795  ,CPU Targets Byte Offset 795 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO794  ,CPU Targets Byte Offset 794 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO793  ,CPU Targets Byte Offset 793 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO792  ,CPU Targets Byte Offset 792 "
group.long 0xB1C++0x03
line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO799  ,CPU Targets Byte Offset 799 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO798  ,CPU Targets Byte Offset 798 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO797  ,CPU Targets Byte Offset 797 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO796  ,CPU Targets Byte Offset 796 "
else
hgroup.long 0xB00++0x03
hide.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192"
hgroup.long 0xB04++0x03
hide.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193"
hgroup.long 0xB08++0x03
hide.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194"
hgroup.long 0xB0C++0x03
hide.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195"
hgroup.long 0xB10++0x03
hide.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196"
hgroup.long 0xB14++0x03
hide.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197"
hgroup.long 0xB18++0x03
hide.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198"
hgroup.long 0xB1C++0x03
hide.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)
group.long 0xB20++0x03
line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO803  ,CPU Targets Byte Offset 803 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO802  ,CPU Targets Byte Offset 802 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO801  ,CPU Targets Byte Offset 801 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO800  ,CPU Targets Byte Offset 800 "
group.long 0xB24++0x03
line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO807  ,CPU Targets Byte Offset 807 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO806  ,CPU Targets Byte Offset 806 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO805  ,CPU Targets Byte Offset 805 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO804  ,CPU Targets Byte Offset 804 "
group.long 0xB28++0x03
line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO811  ,CPU Targets Byte Offset 811 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO810  ,CPU Targets Byte Offset 810 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO809  ,CPU Targets Byte Offset 809 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO808  ,CPU Targets Byte Offset 808 "
group.long 0xB2C++0x03
line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO815  ,CPU Targets Byte Offset 815 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO814  ,CPU Targets Byte Offset 814 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO813  ,CPU Targets Byte Offset 813 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO812  ,CPU Targets Byte Offset 812 "
group.long 0xB30++0x03
line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO819  ,CPU Targets Byte Offset 819 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO818  ,CPU Targets Byte Offset 818 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO817  ,CPU Targets Byte Offset 817 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO816  ,CPU Targets Byte Offset 816 "
group.long 0xB34++0x03
line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO823  ,CPU Targets Byte Offset 823 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO822  ,CPU Targets Byte Offset 822 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO821  ,CPU Targets Byte Offset 821 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO820  ,CPU Targets Byte Offset 820 "
group.long 0xB38++0x03
line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO827  ,CPU Targets Byte Offset 827 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO826  ,CPU Targets Byte Offset 826 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO825  ,CPU Targets Byte Offset 825 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO824  ,CPU Targets Byte Offset 824 "
group.long 0xB3C++0x03
line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO831  ,CPU Targets Byte Offset 831 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO830  ,CPU Targets Byte Offset 830 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO829  ,CPU Targets Byte Offset 829 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO828  ,CPU Targets Byte Offset 828 "
else
hgroup.long 0xB20++0x03
hide.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200"
hgroup.long 0xB24++0x03
hide.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201"
hgroup.long 0xB28++0x03
hide.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202"
hgroup.long 0xB2C++0x03
hide.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203"
hgroup.long 0xB30++0x03
hide.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204"
hgroup.long 0xB34++0x03
hide.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205"
hgroup.long 0xB38++0x03
hide.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206"
hgroup.long 0xB3C++0x03
hide.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A)
group.long 0xB40++0x03
line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO835  ,CPU Targets Byte Offset 835 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO834  ,CPU Targets Byte Offset 834 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO833  ,CPU Targets Byte Offset 833 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO832  ,CPU Targets Byte Offset 832 "
group.long 0xB44++0x03
line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO839  ,CPU Targets Byte Offset 839 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO838  ,CPU Targets Byte Offset 838 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO837  ,CPU Targets Byte Offset 837 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO836  ,CPU Targets Byte Offset 836 "
group.long 0xB48++0x03
line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO843  ,CPU Targets Byte Offset 843 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO842  ,CPU Targets Byte Offset 842 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO841  ,CPU Targets Byte Offset 841 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO840  ,CPU Targets Byte Offset 840 "
group.long 0xB4C++0x03
line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO847  ,CPU Targets Byte Offset 847 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO846  ,CPU Targets Byte Offset 846 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO845  ,CPU Targets Byte Offset 845 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO844  ,CPU Targets Byte Offset 844 "
group.long 0xB50++0x03
line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO851  ,CPU Targets Byte Offset 851 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO850  ,CPU Targets Byte Offset 850 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO849  ,CPU Targets Byte Offset 849 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO848  ,CPU Targets Byte Offset 848 "
group.long 0xB54++0x03
line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO855  ,CPU Targets Byte Offset 855 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO854  ,CPU Targets Byte Offset 854 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO853  ,CPU Targets Byte Offset 853 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO852  ,CPU Targets Byte Offset 852 "
group.long 0xB58++0x03
line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO859  ,CPU Targets Byte Offset 859 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO858  ,CPU Targets Byte Offset 858 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO857  ,CPU Targets Byte Offset 857 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO856  ,CPU Targets Byte Offset 856 "
group.long 0xB5C++0x03
line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO863  ,CPU Targets Byte Offset 863 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO862  ,CPU Targets Byte Offset 862 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO861  ,CPU Targets Byte Offset 861 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO860  ,CPU Targets Byte Offset 860 "
else
hgroup.long 0xB40++0x03
hide.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208"
hgroup.long 0xB44++0x03
hide.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209"
hgroup.long 0xB48++0x03
hide.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210"
hgroup.long 0xB4C++0x03
hide.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211"
hgroup.long 0xB50++0x03
hide.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212"
hgroup.long 0xB54++0x03
hide.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213"
hgroup.long 0xB58++0x03
hide.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214"
hgroup.long 0xB5C++0x03
hide.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)
group.long 0xB60++0x03
line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO867  ,CPU Targets Byte Offset 867 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO866  ,CPU Targets Byte Offset 866 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO865  ,CPU Targets Byte Offset 865 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO864  ,CPU Targets Byte Offset 864 "
group.long 0xB64++0x03
line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO871  ,CPU Targets Byte Offset 871 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO870  ,CPU Targets Byte Offset 870 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO869  ,CPU Targets Byte Offset 869 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO868  ,CPU Targets Byte Offset 868 "
group.long 0xB68++0x03
line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO875  ,CPU Targets Byte Offset 875 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO874  ,CPU Targets Byte Offset 874 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO873  ,CPU Targets Byte Offset 873 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO872  ,CPU Targets Byte Offset 872 "
group.long 0xB6C++0x03
line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO879  ,CPU Targets Byte Offset 879 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO878  ,CPU Targets Byte Offset 878 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO877  ,CPU Targets Byte Offset 877 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO876  ,CPU Targets Byte Offset 876 "
group.long 0xB70++0x03
line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO883  ,CPU Targets Byte Offset 883 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO882  ,CPU Targets Byte Offset 882 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO881  ,CPU Targets Byte Offset 881 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO880  ,CPU Targets Byte Offset 880 "
group.long 0xB74++0x03
line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO887  ,CPU Targets Byte Offset 887 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO886  ,CPU Targets Byte Offset 886 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO885  ,CPU Targets Byte Offset 885 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO884  ,CPU Targets Byte Offset 884 "
group.long 0xB78++0x03
line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO891  ,CPU Targets Byte Offset 891 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO890  ,CPU Targets Byte Offset 890 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO889  ,CPU Targets Byte Offset 889 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO888  ,CPU Targets Byte Offset 888 "
group.long 0xB7C++0x03
line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO895  ,CPU Targets Byte Offset 895 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO894  ,CPU Targets Byte Offset 894 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO893  ,CPU Targets Byte Offset 893 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO892  ,CPU Targets Byte Offset 892 "
else
hgroup.long 0xB60++0x03
hide.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216"
hgroup.long 0xB64++0x03
hide.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217"
hgroup.long 0xB68++0x03
hide.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218"
hgroup.long 0xB6C++0x03
hide.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219"
hgroup.long 0xB70++0x03
hide.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220"
hgroup.long 0xB74++0x03
hide.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221"
hgroup.long 0xB78++0x03
hide.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222"
hgroup.long 0xB7C++0x03
hide.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)
group.long 0xB80++0x03
line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO899  ,CPU Targets Byte Offset 899 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO898  ,CPU Targets Byte Offset 898 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO897  ,CPU Targets Byte Offset 897 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO896  ,CPU Targets Byte Offset 896 "
group.long 0xB84++0x03
line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO903  ,CPU Targets Byte Offset 903 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO902  ,CPU Targets Byte Offset 902 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO901  ,CPU Targets Byte Offset 901 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO900  ,CPU Targets Byte Offset 900 "
group.long 0xB88++0x03
line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO907  ,CPU Targets Byte Offset 907 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO906  ,CPU Targets Byte Offset 906 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO905  ,CPU Targets Byte Offset 905 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO904  ,CPU Targets Byte Offset 904 "
group.long 0xB8C++0x03
line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO911  ,CPU Targets Byte Offset 911 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO910  ,CPU Targets Byte Offset 910 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO909  ,CPU Targets Byte Offset 909 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO908  ,CPU Targets Byte Offset 908 "
group.long 0xB90++0x03
line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO915  ,CPU Targets Byte Offset 915 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO914  ,CPU Targets Byte Offset 914 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO913  ,CPU Targets Byte Offset 913 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO912  ,CPU Targets Byte Offset 912 "
group.long 0xB94++0x03
line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO919  ,CPU Targets Byte Offset 919 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO918  ,CPU Targets Byte Offset 918 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO917  ,CPU Targets Byte Offset 917 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO916  ,CPU Targets Byte Offset 916 "
group.long 0xB98++0x03
line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO923  ,CPU Targets Byte Offset 923 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO922  ,CPU Targets Byte Offset 922 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO921  ,CPU Targets Byte Offset 921 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO920  ,CPU Targets Byte Offset 920 "
group.long 0xB9C++0x03
line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO927  ,CPU Targets Byte Offset 927 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO926  ,CPU Targets Byte Offset 926 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO925  ,CPU Targets Byte Offset 925 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO924  ,CPU Targets Byte Offset 924 "
else
hgroup.long 0xB80++0x03
hide.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224"
hgroup.long 0xB84++0x03
hide.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225"
hgroup.long 0xB88++0x03
hide.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226"
hgroup.long 0xB8C++0x03
hide.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227"
hgroup.long 0xB90++0x03
hide.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228"
hgroup.long 0xB94++0x03
hide.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229"
hgroup.long 0xB98++0x03
hide.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230"
hgroup.long 0xB9C++0x03
hide.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)
group.long 0xBA0++0x03
line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO931  ,CPU Targets Byte Offset 931 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO930  ,CPU Targets Byte Offset 930 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO929  ,CPU Targets Byte Offset 929 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO928  ,CPU Targets Byte Offset 928 "
group.long 0xBA4++0x03
line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO935  ,CPU Targets Byte Offset 935 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO934  ,CPU Targets Byte Offset 934 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO933  ,CPU Targets Byte Offset 933 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO932  ,CPU Targets Byte Offset 932 "
group.long 0xBA8++0x03
line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO939  ,CPU Targets Byte Offset 939 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO938  ,CPU Targets Byte Offset 938 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO937  ,CPU Targets Byte Offset 937 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO936  ,CPU Targets Byte Offset 936 "
group.long 0xBAC++0x03
line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO943  ,CPU Targets Byte Offset 943 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO942  ,CPU Targets Byte Offset 942 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO941  ,CPU Targets Byte Offset 941 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO940  ,CPU Targets Byte Offset 940 "
group.long 0xBB0++0x03
line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO947  ,CPU Targets Byte Offset 947 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO946  ,CPU Targets Byte Offset 946 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO945  ,CPU Targets Byte Offset 945 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO944  ,CPU Targets Byte Offset 944 "
group.long 0xBB4++0x03
line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO951  ,CPU Targets Byte Offset 951 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO950  ,CPU Targets Byte Offset 950 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO949  ,CPU Targets Byte Offset 949 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO948  ,CPU Targets Byte Offset 948 "
group.long 0xBB8++0x03
line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO955  ,CPU Targets Byte Offset 955 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO954  ,CPU Targets Byte Offset 954 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO953  ,CPU Targets Byte Offset 953 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO952  ,CPU Targets Byte Offset 952 "
group.long 0xBBC++0x03
line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO959  ,CPU Targets Byte Offset 959 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO958  ,CPU Targets Byte Offset 958 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO957  ,CPU Targets Byte Offset 957 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO956  ,CPU Targets Byte Offset 956 "
else
hgroup.long 0xBA0++0x03
hide.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232"
hgroup.long 0xBA4++0x03
hide.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233"
hgroup.long 0xBA8++0x03
hide.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234"
hgroup.long 0xBAC++0x03
hide.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235"
hgroup.long 0xBB0++0x03
hide.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236"
hgroup.long 0xBB4++0x03
hide.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237"
hgroup.long 0xBB8++0x03
hide.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238"
hgroup.long 0xBBC++0x03
hide.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)
group.long 0xBC0++0x03
line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO963  ,CPU Targets Byte Offset 963 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO962  ,CPU Targets Byte Offset 962 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO961  ,CPU Targets Byte Offset 961 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO960  ,CPU Targets Byte Offset 960 "
group.long 0xBC4++0x03
line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO967  ,CPU Targets Byte Offset 967 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO966  ,CPU Targets Byte Offset 966 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO965  ,CPU Targets Byte Offset 965 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO964  ,CPU Targets Byte Offset 964 "
group.long 0xBC8++0x03
line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO971  ,CPU Targets Byte Offset 971 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO970  ,CPU Targets Byte Offset 970 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO969  ,CPU Targets Byte Offset 969 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO968  ,CPU Targets Byte Offset 968 "
group.long 0xBCC++0x03
line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO975  ,CPU Targets Byte Offset 975 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO974  ,CPU Targets Byte Offset 974 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO973  ,CPU Targets Byte Offset 973 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO972  ,CPU Targets Byte Offset 972 "
group.long 0xBD0++0x03
line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO979  ,CPU Targets Byte Offset 979 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO978  ,CPU Targets Byte Offset 978 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO977  ,CPU Targets Byte Offset 977 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO976  ,CPU Targets Byte Offset 976 "
group.long 0xBD4++0x03
line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO983  ,CPU Targets Byte Offset 983 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO982  ,CPU Targets Byte Offset 982 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO981  ,CPU Targets Byte Offset 981 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO980  ,CPU Targets Byte Offset 980 "
group.long 0xBD8++0x03
line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO987  ,CPU Targets Byte Offset 987 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO986  ,CPU Targets Byte Offset 986 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO985  ,CPU Targets Byte Offset 985 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO984  ,CPU Targets Byte Offset 984 "
group.long 0xBDC++0x03
line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247"
hexmask.long.byte 0x00 24.--31. 1. " CPUTBO991  ,CPU Targets Byte Offset 991 "
hexmask.long.byte 0x00 16.--23. 1. "  CPUTBO990  ,CPU Targets Byte Offset 990 "
hexmask.long.byte 0x00 8.--15. 1. "  CPUTBO989  ,CPU Targets Byte Offset 989 "
hexmask.long.byte 0x00 0.--7. 1. "  CPUTBO988  ,CPU Targets Byte Offset 988 "
else
hgroup.long 0xBC0++0x03
hide.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240"
hgroup.long 0xBC4++0x03
hide.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241"
hgroup.long 0xBC8++0x03
hide.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242"
hgroup.long 0xBCC++0x03
hide.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243"
hgroup.long 0xBD0++0x03
hide.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244"
hgroup.long 0xBD4++0x03
hide.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245"
hgroup.long 0xBD8++0x03
hide.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246"
hgroup.long 0xBDC++0x03
hide.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247"
endif
else
hgroup.long 0x800++0x03
hide.long 0x00 "GICD_ITARGETSR0  ,Interrupt Processor Targets Register 0  "
hgroup.long 0x804++0x03
hide.long 0x00 "GICD_ITARGETSR1  ,Interrupt Processor Targets Register 1  "
hgroup.long 0x808++0x03
hide.long 0x00 "GICD_ITARGETSR2  ,Interrupt Processor Targets Register 2  "
hgroup.long 0x80C++0x03
hide.long 0x00 "GICD_ITARGETSR3  ,Interrupt Processor Targets Register 3  "
hgroup.long 0x810++0x03
hide.long 0x00 "GICD_ITARGETSR4  ,Interrupt Processor Targets Register 4  "
hgroup.long 0x814++0x03
hide.long 0x00 "GICD_ITARGETSR5  ,Interrupt Processor Targets Register 5  "
hgroup.long 0x818++0x03
hide.long 0x00 "GICD_ITARGETSR6  ,Interrupt Processor Targets Register 6  "
hgroup.long 0x81C++0x03
hide.long 0x00 "GICD_ITARGETSR7  ,Interrupt Processor Targets Register 7  "
hgroup.long 0x820++0x03
hide.long 0x00 "GICD_ITARGETSR8  ,Interrupt Processor Targets Register 8  "
hgroup.long 0x824++0x03
hide.long 0x00 "GICD_ITARGETSR9  ,Interrupt Processor Targets Register 9  "
hgroup.long 0x828++0x03
hide.long 0x00 "GICD_ITARGETSR10 ,Interrupt Processor Targets Register 10 "
hgroup.long 0x82C++0x03
hide.long 0x00 "GICD_ITARGETSR11 ,Interrupt Processor Targets Register 11 "
hgroup.long 0x830++0x03
hide.long 0x00 "GICD_ITARGETSR12 ,Interrupt Processor Targets Register 12 "
hgroup.long 0x834++0x03
hide.long 0x00 "GICD_ITARGETSR13 ,Interrupt Processor Targets Register 13 "
hgroup.long 0x838++0x03
hide.long 0x00 "GICD_ITARGETSR14 ,Interrupt Processor Targets Register 14 "
hgroup.long 0x83C++0x03
hide.long 0x00 "GICD_ITARGETSR15 ,Interrupt Processor Targets Register 15 "
hgroup.long 0x840++0x03
hide.long 0x00 "GICD_ITARGETSR16 ,Interrupt Processor Targets Register 16 "
hgroup.long 0x844++0x03
hide.long 0x00 "GICD_ITARGETSR17 ,Interrupt Processor Targets Register 17 "
hgroup.long 0x848++0x03
hide.long 0x00 "GICD_ITARGETSR18 ,Interrupt Processor Targets Register 18 "
hgroup.long 0x84C++0x03
hide.long 0x00 "GICD_ITARGETSR19 ,Interrupt Processor Targets Register 19 "
hgroup.long 0x850++0x03
hide.long 0x00 "GICD_ITARGETSR20 ,Interrupt Processor Targets Register 20 "
hgroup.long 0x854++0x03
hide.long 0x00 "GICD_ITARGETSR21 ,Interrupt Processor Targets Register 21 "
hgroup.long 0x858++0x03
hide.long 0x00 "GICD_ITARGETSR22 ,Interrupt Processor Targets Register 22 "
hgroup.long 0x85C++0x03
hide.long 0x00 "GICD_ITARGETSR23 ,Interrupt Processor Targets Register 23 "
hgroup.long 0x860++0x03
hide.long 0x00 "GICD_ITARGETSR24 ,Interrupt Processor Targets Register 24 "
hgroup.long 0x864++0x03
hide.long 0x00 "GICD_ITARGETSR25 ,Interrupt Processor Targets Register 25 "
hgroup.long 0x868++0x03
hide.long 0x00 "GICD_ITARGETSR26 ,Interrupt Processor Targets Register 26 "
hgroup.long 0x86C++0x03
hide.long 0x00 "GICD_ITARGETSR27 ,Interrupt Processor Targets Register 27 "
hgroup.long 0x870++0x03
hide.long 0x00 "GICD_ITARGETSR28 ,Interrupt Processor Targets Register 28 "
hgroup.long 0x874++0x03
hide.long 0x00 "GICD_ITARGETSR29 ,Interrupt Processor Targets Register 29 "
hgroup.long 0x878++0x03
hide.long 0x00 "GICD_ITARGETSR30 ,Interrupt Processor Targets Register 30 "
hgroup.long 0x87C++0x03
hide.long 0x00 "GICD_ITARGETSR31 ,Interrupt Processor Targets Register 31 "
hgroup.long 0x880++0x03
hide.long 0x00 "GICD_ITARGETSR32 ,Interrupt Processor Targets Register 32 "
hgroup.long 0x884++0x03
hide.long 0x00 "GICD_ITARGETSR33 ,Interrupt Processor Targets Register 33 "
hgroup.long 0x888++0x03
hide.long 0x00 "GICD_ITARGETSR34 ,Interrupt Processor Targets Register 34 "
hgroup.long 0x88C++0x03
hide.long 0x00 "GICD_ITARGETSR35 ,Interrupt Processor Targets Register 35 "
hgroup.long 0x890++0x03
hide.long 0x00 "GICD_ITARGETSR36 ,Interrupt Processor Targets Register 36 "
hgroup.long 0x894++0x03
hide.long 0x00 "GICD_ITARGETSR37 ,Interrupt Processor Targets Register 37 "
hgroup.long 0x898++0x03
hide.long 0x00 "GICD_ITARGETSR38 ,Interrupt Processor Targets Register 38 "
hgroup.long 0x89C++0x03
hide.long 0x00 "GICD_ITARGETSR39 ,Interrupt Processor Targets Register 39 "
hgroup.long 0x8A0++0x03
hide.long 0x00 "GICD_ITARGETSR40 ,Interrupt Processor Targets Register 40 "
hgroup.long 0x8A4++0x03
hide.long 0x00 "GICD_ITARGETSR41 ,Interrupt Processor Targets Register 41 "
hgroup.long 0x8A8++0x03
hide.long 0x00 "GICD_ITARGETSR42 ,Interrupt Processor Targets Register 42 "
hgroup.long 0x8AC++0x03
hide.long 0x00 "GICD_ITARGETSR43 ,Interrupt Processor Targets Register 43 "
hgroup.long 0x8B0++0x03
hide.long 0x00 "GICD_ITARGETSR44 ,Interrupt Processor Targets Register 44 "
hgroup.long 0x8B4++0x03
hide.long 0x00 "GICD_ITARGETSR45 ,Interrupt Processor Targets Register 45 "
hgroup.long 0x8B8++0x03
hide.long 0x00 "GICD_ITARGETSR46 ,Interrupt Processor Targets Register 46 "
hgroup.long 0x8BC++0x03
hide.long 0x00 "GICD_ITARGETSR47 ,Interrupt Processor Targets Register 47 "
hgroup.long 0x8C0++0x03
hide.long 0x00 "GICD_ITARGETSR48 ,Interrupt Processor Targets Register 48 "
hgroup.long 0x8C4++0x03
hide.long 0x00 "GICD_ITARGETSR49 ,Interrupt Processor Targets Register 49 "
hgroup.long 0x8C8++0x03
hide.long 0x00 "GICD_ITARGETSR50 ,Interrupt Processor Targets Register 50 "
hgroup.long 0x8CC++0x03
hide.long 0x00 "GICD_ITARGETSR51 ,Interrupt Processor Targets Register 51 "
hgroup.long 0x8D0++0x03
hide.long 0x00 "GICD_ITARGETSR52 ,Interrupt Processor Targets Register 52 "
hgroup.long 0x8D4++0x03
hide.long 0x00 "GICD_ITARGETSR53 ,Interrupt Processor Targets Register 53 "
hgroup.long 0x8D8++0x03
hide.long 0x00 "GICD_ITARGETSR54 ,Interrupt Processor Targets Register 54 "
hgroup.long 0x8DC++0x03
hide.long 0x00 "GICD_ITARGETSR55 ,Interrupt Processor Targets Register 55 "
hgroup.long 0x8E0++0x03
hide.long 0x00 "GICD_ITARGETSR56 ,Interrupt Processor Targets Register 56 "
hgroup.long 0x8E4++0x03
hide.long 0x00 "GICD_ITARGETSR57 ,Interrupt Processor Targets Register 57 "
hgroup.long 0x8E8++0x03
hide.long 0x00 "GICD_ITARGETSR58 ,Interrupt Processor Targets Register 58 "
hgroup.long 0x8EC++0x03
hide.long 0x00 "GICD_ITARGETSR59 ,Interrupt Processor Targets Register 59 "
hgroup.long 0x8F0++0x03
hide.long 0x00 "GICD_ITARGETSR60 ,Interrupt Processor Targets Register 60 "
hgroup.long 0x8F4++0x03
hide.long 0x00 "GICD_ITARGETSR61 ,Interrupt Processor Targets Register 61 "
hgroup.long 0x8F8++0x03
hide.long 0x00 "GICD_ITARGETSR62 ,Interrupt Processor Targets Register 62 "
hgroup.long 0x8FC++0x03
hide.long 0x00 "GICD_ITARGETSR63 ,Interrupt Processor Targets Register 63 "
hgroup.long 0x900++0x03
hide.long 0x00 "GICD_ITARGETSR64 ,Interrupt Processor Targets Register 64 "
hgroup.long 0x904++0x03
hide.long 0x00 "GICD_ITARGETSR65 ,Interrupt Processor Targets Register 65 "
hgroup.long 0x908++0x03
hide.long 0x00 "GICD_ITARGETSR66 ,Interrupt Processor Targets Register 66 "
hgroup.long 0x90C++0x03
hide.long 0x00 "GICD_ITARGETSR67 ,Interrupt Processor Targets Register 67 "
hgroup.long 0x910++0x03
hide.long 0x00 "GICD_ITARGETSR68 ,Interrupt Processor Targets Register 68 "
hgroup.long 0x914++0x03
hide.long 0x00 "GICD_ITARGETSR69 ,Interrupt Processor Targets Register 69 "
hgroup.long 0x918++0x03
hide.long 0x00 "GICD_ITARGETSR70 ,Interrupt Processor Targets Register 70 "
hgroup.long 0x91C++0x03
hide.long 0x00 "GICD_ITARGETSR71 ,Interrupt Processor Targets Register 71 "
hgroup.long 0x920++0x03
hide.long 0x00 "GICD_ITARGETSR72 ,Interrupt Processor Targets Register 72 "
hgroup.long 0x924++0x03
hide.long 0x00 "GICD_ITARGETSR73 ,Interrupt Processor Targets Register 73 "
hgroup.long 0x928++0x03
hide.long 0x00 "GICD_ITARGETSR74 ,Interrupt Processor Targets Register 74 "
hgroup.long 0x92C++0x03
hide.long 0x00 "GICD_ITARGETSR75 ,Interrupt Processor Targets Register 75 "
hgroup.long 0x930++0x03
hide.long 0x00 "GICD_ITARGETSR76 ,Interrupt Processor Targets Register 76 "
hgroup.long 0x934++0x03
hide.long 0x00 "GICD_ITARGETSR77 ,Interrupt Processor Targets Register 77 "
hgroup.long 0x938++0x03
hide.long 0x00 "GICD_ITARGETSR78 ,Interrupt Processor Targets Register 78 "
hgroup.long 0x93C++0x03
hide.long 0x00 "GICD_ITARGETSR79 ,Interrupt Processor Targets Register 79 "
hgroup.long 0x940++0x03
hide.long 0x00 "GICD_ITARGETSR80 ,Interrupt Processor Targets Register 80 "
hgroup.long 0x944++0x03
hide.long 0x00 "GICD_ITARGETSR81 ,Interrupt Processor Targets Register 81 "
hgroup.long 0x948++0x03
hide.long 0x00 "GICD_ITARGETSR82 ,Interrupt Processor Targets Register 82 "
hgroup.long 0x94C++0x03
hide.long 0x00 "GICD_ITARGETSR83 ,Interrupt Processor Targets Register 83 "
hgroup.long 0x950++0x03
hide.long 0x00 "GICD_ITARGETSR84 ,Interrupt Processor Targets Register 84 "
hgroup.long 0x954++0x03
hide.long 0x00 "GICD_ITARGETSR85 ,Interrupt Processor Targets Register 85 "
hgroup.long 0x958++0x03
hide.long 0x00 "GICD_ITARGETSR86 ,Interrupt Processor Targets Register 86 "
hgroup.long 0x95C++0x03
hide.long 0x00 "GICD_ITARGETSR87 ,Interrupt Processor Targets Register 87 "
hgroup.long 0x960++0x03
hide.long 0x00 "GICD_ITARGETSR88 ,Interrupt Processor Targets Register 88 "
hgroup.long 0x964++0x03
hide.long 0x00 "GICD_ITARGETSR89 ,Interrupt Processor Targets Register 89 "
hgroup.long 0x968++0x03
hide.long 0x00 "GICD_ITARGETSR90 ,Interrupt Processor Targets Register 90 "
hgroup.long 0x96C++0x03
hide.long 0x00 "GICD_ITARGETSR91 ,Interrupt Processor Targets Register 91 "
hgroup.long 0x970++0x03
hide.long 0x00 "GICD_ITARGETSR92 ,Interrupt Processor Targets Register 92 "
hgroup.long 0x974++0x03
hide.long 0x00 "GICD_ITARGETSR93 ,Interrupt Processor Targets Register 93 "
hgroup.long 0x978++0x03
hide.long 0x00 "GICD_ITARGETSR94 ,Interrupt Processor Targets Register 94 "
hgroup.long 0x97C++0x03
hide.long 0x00 "GICD_ITARGETSR95 ,Interrupt Processor Targets Register 95 "
hgroup.long 0x980++0x03
hide.long 0x00 "GICD_ITARGETSR96 ,Interrupt Processor Targets Register 96 "
hgroup.long 0x984++0x03
hide.long 0x00 "GICD_ITARGETSR97 ,Interrupt Processor Targets Register 97 "
hgroup.long 0x988++0x03
hide.long 0x00 "GICD_ITARGETSR98 ,Interrupt Processor Targets Register 98 "
hgroup.long 0x98C++0x03
hide.long 0x00 "GICD_ITARGETSR99 ,Interrupt Processor Targets Register 99 "
hgroup.long 0x990++0x03
hide.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100"
hgroup.long 0x994++0x03
hide.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101"
hgroup.long 0x998++0x03
hide.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102"
hgroup.long 0x99C++0x03
hide.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103"
hgroup.long 0x9A0++0x03
hide.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104"
hgroup.long 0x9A4++0x03
hide.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105"
hgroup.long 0x9A8++0x03
hide.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106"
hgroup.long 0x9AC++0x03
hide.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107"
hgroup.long 0x9B0++0x03
hide.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108"
hgroup.long 0x9B4++0x03
hide.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109"
hgroup.long 0x9B8++0x03
hide.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110"
hgroup.long 0x9BC++0x03
hide.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111"
hgroup.long 0x9C0++0x03
hide.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112"
hgroup.long 0x9C4++0x03
hide.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113"
hgroup.long 0x9C8++0x03
hide.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114"
hgroup.long 0x9CC++0x03
hide.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115"
hgroup.long 0x9D0++0x03
hide.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116"
hgroup.long 0x9D4++0x03
hide.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117"
hgroup.long 0x9D8++0x03
hide.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118"
hgroup.long 0x9DC++0x03
hide.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119"
hgroup.long 0x9E0++0x03
hide.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120"
hgroup.long 0x9E4++0x03
hide.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121"
hgroup.long 0x9E8++0x03
hide.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122"
hgroup.long 0x9EC++0x03
hide.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123"
hgroup.long 0x9F0++0x03
hide.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124"
hgroup.long 0x9F4++0x03
hide.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125"
hgroup.long 0x9F8++0x03
hide.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126"
hgroup.long 0x9FC++0x03
hide.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127"
hgroup.long 0xA00++0x03
hide.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128"
hgroup.long 0xA04++0x03
hide.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129"
hgroup.long 0xA08++0x03
hide.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130"
hgroup.long 0xA0C++0x03
hide.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131"
hgroup.long 0xA10++0x03
hide.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132"
hgroup.long 0xA14++0x03
hide.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133"
hgroup.long 0xA18++0x03
hide.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134"
hgroup.long 0xA1C++0x03
hide.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135"
hgroup.long 0xA20++0x03
hide.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136"
hgroup.long 0xA24++0x03
hide.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137"
hgroup.long 0xA28++0x03
hide.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138"
hgroup.long 0xA2C++0x03
hide.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139"
hgroup.long 0xA30++0x03
hide.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140"
hgroup.long 0xA34++0x03
hide.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141"
hgroup.long 0xA38++0x03
hide.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142"
hgroup.long 0xA3C++0x03
hide.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143"
hgroup.long 0xA40++0x03
hide.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144"
hgroup.long 0xA44++0x03
hide.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145"
hgroup.long 0xA48++0x03
hide.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146"
hgroup.long 0xA4C++0x03
hide.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147"
hgroup.long 0xA50++0x03
hide.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148"
hgroup.long 0xA54++0x03
hide.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149"
hgroup.long 0xA58++0x03
hide.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150"
hgroup.long 0xA5C++0x03
hide.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151"
hgroup.long 0xA60++0x03
hide.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152"
hgroup.long 0xA64++0x03
hide.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153"
hgroup.long 0xA68++0x03
hide.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154"
hgroup.long 0xA6C++0x03
hide.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155"
hgroup.long 0xA70++0x03
hide.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156"
hgroup.long 0xA74++0x03
hide.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157"
hgroup.long 0xA78++0x03
hide.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158"
hgroup.long 0xA7C++0x03
hide.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159"
hgroup.long 0xA80++0x03
hide.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160"
hgroup.long 0xA84++0x03
hide.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161"
hgroup.long 0xA88++0x03
hide.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162"
hgroup.long 0xA8C++0x03
hide.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163"
hgroup.long 0xA90++0x03
hide.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164"
hgroup.long 0xA94++0x03
hide.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165"
hgroup.long 0xA98++0x03
hide.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166"
hgroup.long 0xA9C++0x03
hide.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167"
hgroup.long 0xAA0++0x03
hide.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168"
hgroup.long 0xAA4++0x03
hide.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169"
hgroup.long 0xAA8++0x03
hide.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170"
hgroup.long 0xAAC++0x03
hide.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171"
hgroup.long 0xAB0++0x03
hide.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172"
hgroup.long 0xAB4++0x03
hide.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173"
hgroup.long 0xAB8++0x03
hide.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174"
hgroup.long 0xABC++0x03
hide.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175"
hgroup.long 0xAC0++0x03
hide.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176"
hgroup.long 0xAC4++0x03
hide.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177"
hgroup.long 0xAC8++0x03
hide.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178"
hgroup.long 0xACC++0x03
hide.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179"
hgroup.long 0xAD0++0x03
hide.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180"
hgroup.long 0xAD4++0x03
hide.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181"
hgroup.long 0xAD8++0x03
hide.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182"
hgroup.long 0xADC++0x03
hide.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183"
hgroup.long 0xAE0++0x03
hide.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184"
hgroup.long 0xAE4++0x03
hide.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185"
hgroup.long 0xAE8++0x03
hide.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186"
hgroup.long 0xAEC++0x03
hide.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187"
hgroup.long 0xAF0++0x03
hide.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188"
hgroup.long 0xAF4++0x03
hide.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189"
hgroup.long 0xAF8++0x03
hide.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190"
hgroup.long 0xAFC++0x03
hide.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191"
hgroup.long 0xB00++0x03
hide.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192"
hgroup.long 0xB04++0x03
hide.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193"
hgroup.long 0xB08++0x03
hide.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194"
hgroup.long 0xB0C++0x03
hide.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195"
hgroup.long 0xB10++0x03
hide.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196"
hgroup.long 0xB14++0x03
hide.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197"
hgroup.long 0xB18++0x03
hide.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198"
hgroup.long 0xB1C++0x03
hide.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199"
hgroup.long 0xB20++0x03
hide.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200"
hgroup.long 0xB24++0x03
hide.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201"
hgroup.long 0xB28++0x03
hide.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202"
hgroup.long 0xB2C++0x03
hide.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203"
hgroup.long 0xB30++0x03
hide.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204"
hgroup.long 0xB34++0x03
hide.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205"
hgroup.long 0xB38++0x03
hide.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206"
hgroup.long 0xB3C++0x03
hide.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207"
hgroup.long 0xB40++0x03
hide.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208"
hgroup.long 0xB44++0x03
hide.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209"
hgroup.long 0xB48++0x03
hide.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210"
hgroup.long 0xB4C++0x03
hide.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211"
hgroup.long 0xB50++0x03
hide.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212"
hgroup.long 0xB54++0x03
hide.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213"
hgroup.long 0xB58++0x03
hide.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214"
hgroup.long 0xB5C++0x03
hide.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215"
hgroup.long 0xB60++0x03
hide.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216"
hgroup.long 0xB64++0x03
hide.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217"
hgroup.long 0xB68++0x03
hide.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218"
hgroup.long 0xB6C++0x03
hide.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219"
hgroup.long 0xB70++0x03
hide.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220"
hgroup.long 0xB74++0x03
hide.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221"
hgroup.long 0xB78++0x03
hide.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222"
hgroup.long 0xB7C++0x03
hide.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223"
hgroup.long 0xB80++0x03
hide.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224"
hgroup.long 0xB84++0x03
hide.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225"
hgroup.long 0xB88++0x03
hide.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226"
hgroup.long 0xB8C++0x03
hide.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227"
hgroup.long 0xB90++0x03
hide.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228"
hgroup.long 0xB94++0x03
hide.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229"
hgroup.long 0xB98++0x03
hide.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230"
hgroup.long 0xB9C++0x03
hide.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231"
hgroup.long 0xBA0++0x03
hide.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232"
hgroup.long 0xBA4++0x03
hide.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233"
hgroup.long 0xBA8++0x03
hide.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234"
hgroup.long 0xBAC++0x03
hide.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235"
hgroup.long 0xBB0++0x03
hide.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236"
hgroup.long 0xBB4++0x03
hide.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237"
hgroup.long 0xBB8++0x03
hide.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238"
hgroup.long 0xBBC++0x03
hide.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239"
hgroup.long 0xBC0++0x03
hide.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240"
hgroup.long 0xBC4++0x03
hide.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241"
hgroup.long 0xBC8++0x03
hide.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242"
hgroup.long 0xBCC++0x03
hide.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243"
hgroup.long 0xBD0++0x03
hide.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244"
hgroup.long 0xBD4++0x03
hide.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245"
hgroup.long 0xBD8++0x03
hide.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246"
hgroup.long 0xBDC++0x03
hide.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247"
endif
tree.end
width 14.
tree "Configuration Registers"
rgroup.long 0xC00++0x03
line.long 0x00 "GICD_ICFGR0,Interrupt Configuration Register"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SGI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SGI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SGI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SGI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SGI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SGI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SGI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SGI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SGI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SGI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SGI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SGI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SGI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SGI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SGI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SGI)" "Level,Edge"
group.long 0xC04++0x03
line.long 0x00 "GICD_ICFGR1,Interrupt Configuration Register"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (PPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (PPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (PPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (PPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (PPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (PPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (PPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (PPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (PPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (PPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (PPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (PPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (PPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (PPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (PPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (PPI)" "Level,Edge"
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1)
group.long 0xC08++0x03
line.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC0C++0x03
line.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC08++0x03
hide.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2"
hgroup.long 0xC0C++0x03
hide.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x2)
group.long 0xC10++0x03
line.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC14++0x03
line.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC10++0x03
hide.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4"
hgroup.long 0xC14++0x03
hide.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x3)
group.long 0xC18++0x03
line.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC1C++0x03
line.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC18++0x03
hide.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6"
hgroup.long 0xC1C++0x03
hide.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x4)
group.long 0xC20++0x03
line.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC24++0x03
line.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC20++0x03
hide.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8"
hgroup.long 0xC24++0x03
hide.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x5)
group.long 0xC28++0x03
line.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC2C++0x03
line.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC28++0x03
hide.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10"
hgroup.long 0xC2C++0x03
hide.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x6)
group.long 0xC30++0x03
line.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC34++0x03
line.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC30++0x03
hide.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12"
hgroup.long 0xC34++0x03
hide.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x7)
group.long 0xC38++0x03
line.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC3C++0x03
line.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC38++0x03
hide.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14"
hgroup.long 0xC3C++0x03
hide.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x8)
group.long 0xC40++0x03
line.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC44++0x03
line.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC40++0x03
hide.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16"
hgroup.long 0xC44++0x03
hide.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x9)
group.long 0xC48++0x03
line.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC4C++0x03
line.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC48++0x03
hide.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18"
hgroup.long 0xC4C++0x03
hide.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xA)
group.long 0xC50++0x03
line.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC54++0x03
line.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC50++0x03
hide.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20"
hgroup.long 0xC54++0x03
hide.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xB)
group.long 0xC58++0x03
line.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC5C++0x03
line.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC58++0x03
hide.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22"
hgroup.long 0xC5C++0x03
hide.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xC)
group.long 0xC60++0x03
line.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC64++0x03
line.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC60++0x03
hide.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24"
hgroup.long 0xC64++0x03
hide.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xD)
group.long 0xC68++0x03
line.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC6C++0x03
line.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC68++0x03
hide.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26"
hgroup.long 0xC6C++0x03
hide.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xE)
group.long 0xC70++0x03
line.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC74++0x03
line.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC70++0x03
hide.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28"
hgroup.long 0xC74++0x03
hide.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0xF)
group.long 0xC78++0x03
line.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC7C++0x03
line.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC78++0x03
hide.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30"
hgroup.long 0xC7C++0x03
hide.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)
group.long 0xC80++0x03
line.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC84++0x03
line.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC80++0x03
hide.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32"
hgroup.long 0xC84++0x03
hide.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)
group.long 0xC88++0x03
line.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC8C++0x03
line.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC88++0x03
hide.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34"
hgroup.long 0xC8C++0x03
hide.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)
group.long 0xC90++0x03
line.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC94++0x03
line.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC90++0x03
hide.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36"
hgroup.long 0xC94++0x03
hide.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)
group.long 0xC98++0x03
line.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xC9C++0x03
line.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xC98++0x03
hide.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38"
hgroup.long 0xC9C++0x03
hide.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)
group.long 0xCA0++0x03
line.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCA4++0x03
line.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCA0++0x03
hide.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40"
hgroup.long 0xCA4++0x03
hide.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)
group.long 0xCA8++0x03
line.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCAC++0x03
line.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCA8++0x03
hide.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42"
hgroup.long 0xCAC++0x03
hide.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)
group.long 0xCB0++0x03
line.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCB4++0x03
line.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCB0++0x03
hide.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44"
hgroup.long 0xCB4++0x03
hide.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)
group.long 0xCB8++0x03
line.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCBC++0x03
line.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCB8++0x03
hide.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46"
hgroup.long 0xCBC++0x03
hide.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)
group.long 0xCC0++0x03
line.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCC4++0x03
line.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCC0++0x03
hide.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48"
hgroup.long 0xCC4++0x03
hide.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)
group.long 0xCC8++0x03
line.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCCC++0x03
line.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCC8++0x03
hide.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50"
hgroup.long 0xCCC++0x03
hide.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A)
group.long 0xCD0++0x03
line.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCD4++0x03
line.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCD0++0x03
hide.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52"
hgroup.long 0xCD4++0x03
hide.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)
group.long 0xCD8++0x03
line.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCDC++0x03
line.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCD8++0x03
hide.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54"
hgroup.long 0xCDC++0x03
hide.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)
group.long 0xCE0++0x03
line.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCE4++0x03
line.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCE0++0x03
hide.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56"
hgroup.long 0xCE4++0x03
hide.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)
group.long 0xCE8++0x03
line.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCEC++0x03
line.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCE8++0x03
hide.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58"
hgroup.long 0xCEC++0x03
hide.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)
group.long 0xCF0++0x03
line.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
group.long 0xCF4++0x03
line.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61"
bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15 (SPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14 ,Interrupt Configuration 14 (SPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13 ,Interrupt Configuration 13 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12 (SPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11 ,Interrupt Configuration 11 (SPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10 ,Interrupt Configuration 10 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 19. " ICF9  ,Interrupt Configuration 9 (SPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8  ,Interrupt Configuration 8 (SPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7  ,Interrupt Configuration 7 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 13. " ICF6  ,Interrupt Configuration 6 (SPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5  ,Interrupt Configuration 5 (SPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4  ,Interrupt Configuration 4 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 7. " ICF3  ,Interrupt Configuration 3 (SPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2  ,Interrupt Configuration 2 (SPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1  ,Interrupt Configuration 1 (SPI)" "Level,Edge"
textline "                       "
bitfld.long 0x00 1. " ICF0  ,Interrupt Configuration 0 (SPI)" "Level,Edge"
else
hgroup.long 0xCF0++0x03
hide.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60"
hgroup.long 0xCF4++0x03
hide.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61"
endif
tree.end
width 17.
tree "Interrupt Group Modifier Registers"
hgroup.long 0x0D00++0x03
hide.long 0x0 "GICD_IGRPMODR0,Interrupt Group Modifier Register 0"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D00))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01))
group.long 0x0D04++0x03
line.long 0x0 "GICD_IGRPMODR1,Interrupt Group Modifier Register 1"
bitfld.long 0x00 31. " GMB63  ,Group Modifier Bit 63" "0,1"
bitfld.long 0x00 30. "  GMB62  ,Group Modifier Bit 62" "0,1"
bitfld.long 0x00 29. "  GMB61  ,Group Modifier Bit 61" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB60  ,Group Modifier Bit 60" "0,1"
bitfld.long 0x00 27. "  GMB59  ,Group Modifier Bit 59" "0,1"
bitfld.long 0x00 26. "  GMB58  ,Group Modifier Bit 58" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB57  ,Group Modifier Bit 57" "0,1"
bitfld.long 0x00 24. "  GMB56  ,Group Modifier Bit 56" "0,1"
bitfld.long 0x00 23. "  GMB55  ,Group Modifier Bit 55" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB54  ,Group Modifier Bit 54" "0,1"
bitfld.long 0x00 21. "  GMB53  ,Group Modifier Bit 53" "0,1"
bitfld.long 0x00 20. "  GMB52  ,Group Modifier Bit 52" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB51  ,Group Modifier Bit 51" "0,1"
bitfld.long 0x00 18. "  GMB50  ,Group Modifier Bit 50" "0,1"
bitfld.long 0x00 17. "  GMB49  ,Group Modifier Bit 49" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB48  ,Group Modifier Bit 48" "0,1"
bitfld.long 0x00 15. "  GMB47  ,Group Modifier Bit 47" "0,1"
bitfld.long 0x00 14. "  GMB46  ,Group Modifier Bit 46" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB45  ,Group Modifier Bit 45" "0,1"
bitfld.long 0x00 12. "  GMB44  ,Group Modifier Bit 44" "0,1"
bitfld.long 0x00 11. "  GMB43  ,Group Modifier Bit 43" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB42  ,Group Modifier Bit 42" "0,1"
bitfld.long 0x00 9. "  GMB41  ,Group Modifier Bit 41" "0,1"
bitfld.long 0x00 8. "  GMB40  ,Group Modifier Bit 40" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB39  ,Group Modifier Bit 39" "0,1"
bitfld.long 0x00 6. "  GMB38  ,Group Modifier Bit 38" "0,1"
bitfld.long 0x00 5. "  GMB37  ,Group Modifier Bit 37" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB36  ,Group Modifier Bit 36" "0,1"
bitfld.long 0x00 3. "  GMB35  ,Group Modifier Bit 35" "0,1"
bitfld.long 0x00 2. "  GMB34  ,Group Modifier Bit 34" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB33  ,Group Modifier Bit 33" "0,1"
bitfld.long 0x00 0. "  GMB32  ,Group Modifier Bit 32" "0,1"
else
hgroup.long 0x0D04++0x03
hide.long 0x0 "GICD_IGRPMODR1,Interrupt Group Modifier Register 1"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D08))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02))
group.long 0x0D08++0x03
line.long 0x0 "GICD_IGRPMODR2,Interrupt Group Modifier Register 2"
bitfld.long 0x00 31. " GMB95  ,Group Modifier Bit 95" "0,1"
bitfld.long 0x00 30. "  GMB94  ,Group Modifier Bit 94" "0,1"
bitfld.long 0x00 29. "  GMB93  ,Group Modifier Bit 93" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB92  ,Group Modifier Bit 92" "0,1"
bitfld.long 0x00 27. "  GMB91  ,Group Modifier Bit 91" "0,1"
bitfld.long 0x00 26. "  GMB90  ,Group Modifier Bit 90" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB89  ,Group Modifier Bit 89" "0,1"
bitfld.long 0x00 24. "  GMB88  ,Group Modifier Bit 88" "0,1"
bitfld.long 0x00 23. "  GMB87  ,Group Modifier Bit 87" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB86  ,Group Modifier Bit 86" "0,1"
bitfld.long 0x00 21. "  GMB85  ,Group Modifier Bit 85" "0,1"
bitfld.long 0x00 20. "  GMB84  ,Group Modifier Bit 84" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB83  ,Group Modifier Bit 83" "0,1"
bitfld.long 0x00 18. "  GMB82  ,Group Modifier Bit 82" "0,1"
bitfld.long 0x00 17. "  GMB81  ,Group Modifier Bit 81" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB80  ,Group Modifier Bit 80" "0,1"
bitfld.long 0x00 15. "  GMB79  ,Group Modifier Bit 79" "0,1"
bitfld.long 0x00 14. "  GMB78  ,Group Modifier Bit 78" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB77  ,Group Modifier Bit 77" "0,1"
bitfld.long 0x00 12. "  GMB76  ,Group Modifier Bit 76" "0,1"
bitfld.long 0x00 11. "  GMB75  ,Group Modifier Bit 75" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB74  ,Group Modifier Bit 74" "0,1"
bitfld.long 0x00 9. "  GMB73  ,Group Modifier Bit 73" "0,1"
bitfld.long 0x00 8. "  GMB72  ,Group Modifier Bit 72" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB71  ,Group Modifier Bit 71" "0,1"
bitfld.long 0x00 6. "  GMB70  ,Group Modifier Bit 70" "0,1"
bitfld.long 0x00 5. "  GMB69  ,Group Modifier Bit 69" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB68  ,Group Modifier Bit 68" "0,1"
bitfld.long 0x00 3. "  GMB67  ,Group Modifier Bit 67" "0,1"
bitfld.long 0x00 2. "  GMB66  ,Group Modifier Bit 66" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB65  ,Group Modifier Bit 65" "0,1"
bitfld.long 0x00 0. "  GMB64  ,Group Modifier Bit 64" "0,1"
else
hgroup.long 0x0D08++0x03
hide.long 0x0 "GICD_IGRPMODR2,Interrupt Group Modifier Register 2"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D0C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03))
group.long 0x0D0C++0x03
line.long 0x0 "GICD_IGRPMODR3,Interrupt Group Modifier Register 3"
bitfld.long 0x00 31. " GMB127 ,Group Modifier Bit 127" "0,1"
bitfld.long 0x00 30. "  GMB126 ,Group Modifier Bit 126" "0,1"
bitfld.long 0x00 29. "  GMB125 ,Group Modifier Bit 125" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB124 ,Group Modifier Bit 124" "0,1"
bitfld.long 0x00 27. "  GMB123 ,Group Modifier Bit 123" "0,1"
bitfld.long 0x00 26. "  GMB122 ,Group Modifier Bit 122" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB121 ,Group Modifier Bit 121" "0,1"
bitfld.long 0x00 24. "  GMB120 ,Group Modifier Bit 120" "0,1"
bitfld.long 0x00 23. "  GMB119 ,Group Modifier Bit 119" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB118 ,Group Modifier Bit 118" "0,1"
bitfld.long 0x00 21. "  GMB117 ,Group Modifier Bit 117" "0,1"
bitfld.long 0x00 20. "  GMB116 ,Group Modifier Bit 116" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB115 ,Group Modifier Bit 115" "0,1"
bitfld.long 0x00 18. "  GMB114 ,Group Modifier Bit 114" "0,1"
bitfld.long 0x00 17. "  GMB113 ,Group Modifier Bit 113" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB112 ,Group Modifier Bit 112" "0,1"
bitfld.long 0x00 15. "  GMB111 ,Group Modifier Bit 111" "0,1"
bitfld.long 0x00 14. "  GMB110 ,Group Modifier Bit 110" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB109 ,Group Modifier Bit 109" "0,1"
bitfld.long 0x00 12. "  GMB108 ,Group Modifier Bit 108" "0,1"
bitfld.long 0x00 11. "  GMB107 ,Group Modifier Bit 107" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB106 ,Group Modifier Bit 106" "0,1"
bitfld.long 0x00 9. "  GMB105 ,Group Modifier Bit 105" "0,1"
bitfld.long 0x00 8. "  GMB104 ,Group Modifier Bit 104" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB103 ,Group Modifier Bit 103" "0,1"
bitfld.long 0x00 6. "  GMB102 ,Group Modifier Bit 102" "0,1"
bitfld.long 0x00 5. "  GMB101 ,Group Modifier Bit 101" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB100 ,Group Modifier Bit 100" "0,1"
bitfld.long 0x00 3. "  GMB99  ,Group Modifier Bit 99" "0,1"
bitfld.long 0x00 2. "  GMB98  ,Group Modifier Bit 98" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB97  ,Group Modifier Bit 97" "0,1"
bitfld.long 0x00 0. "  GMB96  ,Group Modifier Bit 96" "0,1"
else
hgroup.long 0x0D0C++0x03
hide.long 0x0 "GICD_IGRPMODR3,Interrupt Group Modifier Register 3"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D10))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04))
group.long 0x0D10++0x03
line.long 0x0 "GICD_IGRPMODR4,Interrupt Group Modifier Register 4"
bitfld.long 0x00 31. " GMB159 ,Group Modifier Bit 159" "0,1"
bitfld.long 0x00 30. "  GMB158 ,Group Modifier Bit 158" "0,1"
bitfld.long 0x00 29. "  GMB157 ,Group Modifier Bit 157" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB156 ,Group Modifier Bit 156" "0,1"
bitfld.long 0x00 27. "  GMB155 ,Group Modifier Bit 155" "0,1"
bitfld.long 0x00 26. "  GMB154 ,Group Modifier Bit 154" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB153 ,Group Modifier Bit 153" "0,1"
bitfld.long 0x00 24. "  GMB152 ,Group Modifier Bit 152" "0,1"
bitfld.long 0x00 23. "  GMB151 ,Group Modifier Bit 151" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB150 ,Group Modifier Bit 150" "0,1"
bitfld.long 0x00 21. "  GMB149 ,Group Modifier Bit 149" "0,1"
bitfld.long 0x00 20. "  GMB148 ,Group Modifier Bit 148" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB147 ,Group Modifier Bit 147" "0,1"
bitfld.long 0x00 18. "  GMB146 ,Group Modifier Bit 146" "0,1"
bitfld.long 0x00 17. "  GMB145 ,Group Modifier Bit 145" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB144 ,Group Modifier Bit 144" "0,1"
bitfld.long 0x00 15. "  GMB143 ,Group Modifier Bit 143" "0,1"
bitfld.long 0x00 14. "  GMB142 ,Group Modifier Bit 142" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB141 ,Group Modifier Bit 141" "0,1"
bitfld.long 0x00 12. "  GMB140 ,Group Modifier Bit 140" "0,1"
bitfld.long 0x00 11. "  GMB139 ,Group Modifier Bit 139" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB138 ,Group Modifier Bit 138" "0,1"
bitfld.long 0x00 9. "  GMB137 ,Group Modifier Bit 137" "0,1"
bitfld.long 0x00 8. "  GMB136 ,Group Modifier Bit 136" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB135 ,Group Modifier Bit 135" "0,1"
bitfld.long 0x00 6. "  GMB134 ,Group Modifier Bit 134" "0,1"
bitfld.long 0x00 5. "  GMB133 ,Group Modifier Bit 133" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB132 ,Group Modifier Bit 132" "0,1"
bitfld.long 0x00 3. "  GMB131 ,Group Modifier Bit 131" "0,1"
bitfld.long 0x00 2. "  GMB130 ,Group Modifier Bit 130" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB129 ,Group Modifier Bit 129" "0,1"
bitfld.long 0x00 0. "  GMB128 ,Group Modifier Bit 128" "0,1"
else
hgroup.long 0x0D10++0x03
hide.long 0x0 "GICD_IGRPMODR4,Interrupt Group Modifier Register 4"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D14))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05))
group.long 0x0D14++0x03
line.long 0x0 "GICD_IGRPMODR5,Interrupt Group Modifier Register 5"
bitfld.long 0x00 31. " GMB191 ,Group Modifier Bit 191" "0,1"
bitfld.long 0x00 30. "  GMB190 ,Group Modifier Bit 190" "0,1"
bitfld.long 0x00 29. "  GMB189 ,Group Modifier Bit 189" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB188 ,Group Modifier Bit 188" "0,1"
bitfld.long 0x00 27. "  GMB187 ,Group Modifier Bit 187" "0,1"
bitfld.long 0x00 26. "  GMB186 ,Group Modifier Bit 186" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB185 ,Group Modifier Bit 185" "0,1"
bitfld.long 0x00 24. "  GMB184 ,Group Modifier Bit 184" "0,1"
bitfld.long 0x00 23. "  GMB183 ,Group Modifier Bit 183" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB182 ,Group Modifier Bit 182" "0,1"
bitfld.long 0x00 21. "  GMB181 ,Group Modifier Bit 181" "0,1"
bitfld.long 0x00 20. "  GMB180 ,Group Modifier Bit 180" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB179 ,Group Modifier Bit 179" "0,1"
bitfld.long 0x00 18. "  GMB178 ,Group Modifier Bit 178" "0,1"
bitfld.long 0x00 17. "  GMB177 ,Group Modifier Bit 177" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB176 ,Group Modifier Bit 176" "0,1"
bitfld.long 0x00 15. "  GMB175 ,Group Modifier Bit 175" "0,1"
bitfld.long 0x00 14. "  GMB174 ,Group Modifier Bit 174" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB173 ,Group Modifier Bit 173" "0,1"
bitfld.long 0x00 12. "  GMB172 ,Group Modifier Bit 172" "0,1"
bitfld.long 0x00 11. "  GMB171 ,Group Modifier Bit 171" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB170 ,Group Modifier Bit 170" "0,1"
bitfld.long 0x00 9. "  GMB169 ,Group Modifier Bit 169" "0,1"
bitfld.long 0x00 8. "  GMB168 ,Group Modifier Bit 168" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB167 ,Group Modifier Bit 167" "0,1"
bitfld.long 0x00 6. "  GMB166 ,Group Modifier Bit 166" "0,1"
bitfld.long 0x00 5. "  GMB165 ,Group Modifier Bit 165" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB164 ,Group Modifier Bit 164" "0,1"
bitfld.long 0x00 3. "  GMB163 ,Group Modifier Bit 163" "0,1"
bitfld.long 0x00 2. "  GMB162 ,Group Modifier Bit 162" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB161 ,Group Modifier Bit 161" "0,1"
bitfld.long 0x00 0. "  GMB160 ,Group Modifier Bit 160" "0,1"
else
hgroup.long 0x0D14++0x03
hide.long 0x0 "GICD_IGRPMODR5,Interrupt Group Modifier Register 5"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D18))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06))
group.long 0x0D18++0x03
line.long 0x0 "GICD_IGRPMODR6,Interrupt Group Modifier Register 6"
bitfld.long 0x00 31. " GMB223 ,Group Modifier Bit 223" "0,1"
bitfld.long 0x00 30. "  GMB222 ,Group Modifier Bit 222" "0,1"
bitfld.long 0x00 29. "  GMB221 ,Group Modifier Bit 221" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB220 ,Group Modifier Bit 220" "0,1"
bitfld.long 0x00 27. "  GMB219 ,Group Modifier Bit 219" "0,1"
bitfld.long 0x00 26. "  GMB218 ,Group Modifier Bit 218" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB217 ,Group Modifier Bit 217" "0,1"
bitfld.long 0x00 24. "  GMB216 ,Group Modifier Bit 216" "0,1"
bitfld.long 0x00 23. "  GMB215 ,Group Modifier Bit 215" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB214 ,Group Modifier Bit 214" "0,1"
bitfld.long 0x00 21. "  GMB213 ,Group Modifier Bit 213" "0,1"
bitfld.long 0x00 20. "  GMB212 ,Group Modifier Bit 212" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB211 ,Group Modifier Bit 211" "0,1"
bitfld.long 0x00 18. "  GMB210 ,Group Modifier Bit 210" "0,1"
bitfld.long 0x00 17. "  GMB209 ,Group Modifier Bit 209" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB208 ,Group Modifier Bit 208" "0,1"
bitfld.long 0x00 15. "  GMB207 ,Group Modifier Bit 207" "0,1"
bitfld.long 0x00 14. "  GMB206 ,Group Modifier Bit 206" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB205 ,Group Modifier Bit 205" "0,1"
bitfld.long 0x00 12. "  GMB204 ,Group Modifier Bit 204" "0,1"
bitfld.long 0x00 11. "  GMB203 ,Group Modifier Bit 203" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB202 ,Group Modifier Bit 202" "0,1"
bitfld.long 0x00 9. "  GMB201 ,Group Modifier Bit 201" "0,1"
bitfld.long 0x00 8. "  GMB200 ,Group Modifier Bit 200" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB199 ,Group Modifier Bit 199" "0,1"
bitfld.long 0x00 6. "  GMB198 ,Group Modifier Bit 198" "0,1"
bitfld.long 0x00 5. "  GMB197 ,Group Modifier Bit 197" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB196 ,Group Modifier Bit 196" "0,1"
bitfld.long 0x00 3. "  GMB195 ,Group Modifier Bit 195" "0,1"
bitfld.long 0x00 2. "  GMB194 ,Group Modifier Bit 194" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB193 ,Group Modifier Bit 193" "0,1"
bitfld.long 0x00 0. "  GMB192 ,Group Modifier Bit 192" "0,1"
else
hgroup.long 0x0D18++0x03
hide.long 0x0 "GICD_IGRPMODR6,Interrupt Group Modifier Register 6"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D1C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07))
group.long 0x0D1C++0x03
line.long 0x0 "GICD_IGRPMODR7,Interrupt Group Modifier Register 7"
bitfld.long 0x00 31. " GMB255 ,Group Modifier Bit 255" "0,1"
bitfld.long 0x00 30. "  GMB254 ,Group Modifier Bit 254" "0,1"
bitfld.long 0x00 29. "  GMB253 ,Group Modifier Bit 253" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB252 ,Group Modifier Bit 252" "0,1"
bitfld.long 0x00 27. "  GMB251 ,Group Modifier Bit 251" "0,1"
bitfld.long 0x00 26. "  GMB250 ,Group Modifier Bit 250" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB249 ,Group Modifier Bit 249" "0,1"
bitfld.long 0x00 24. "  GMB248 ,Group Modifier Bit 248" "0,1"
bitfld.long 0x00 23. "  GMB247 ,Group Modifier Bit 247" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB246 ,Group Modifier Bit 246" "0,1"
bitfld.long 0x00 21. "  GMB245 ,Group Modifier Bit 245" "0,1"
bitfld.long 0x00 20. "  GMB244 ,Group Modifier Bit 244" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB243 ,Group Modifier Bit 243" "0,1"
bitfld.long 0x00 18. "  GMB242 ,Group Modifier Bit 242" "0,1"
bitfld.long 0x00 17. "  GMB241 ,Group Modifier Bit 241" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB240 ,Group Modifier Bit 240" "0,1"
bitfld.long 0x00 15. "  GMB239 ,Group Modifier Bit 239" "0,1"
bitfld.long 0x00 14. "  GMB238 ,Group Modifier Bit 238" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB237 ,Group Modifier Bit 237" "0,1"
bitfld.long 0x00 12. "  GMB236 ,Group Modifier Bit 236" "0,1"
bitfld.long 0x00 11. "  GMB235 ,Group Modifier Bit 235" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB234 ,Group Modifier Bit 234" "0,1"
bitfld.long 0x00 9. "  GMB233 ,Group Modifier Bit 233" "0,1"
bitfld.long 0x00 8. "  GMB232 ,Group Modifier Bit 232" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB231 ,Group Modifier Bit 231" "0,1"
bitfld.long 0x00 6. "  GMB230 ,Group Modifier Bit 230" "0,1"
bitfld.long 0x00 5. "  GMB229 ,Group Modifier Bit 229" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB228 ,Group Modifier Bit 228" "0,1"
bitfld.long 0x00 3. "  GMB227 ,Group Modifier Bit 227" "0,1"
bitfld.long 0x00 2. "  GMB226 ,Group Modifier Bit 226" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB225 ,Group Modifier Bit 225" "0,1"
bitfld.long 0x00 0. "  GMB224 ,Group Modifier Bit 224" "0,1"
else
hgroup.long 0x0D1C++0x03
hide.long 0x0 "GICD_IGRPMODR7,Interrupt Group Modifier Register 7"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D20))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08))
group.long 0x0D20++0x03
line.long 0x0 "GICD_IGRPMODR8,Interrupt Group Modifier Register 8"
bitfld.long 0x00 31. " GMB287 ,Group Modifier Bit 287" "0,1"
bitfld.long 0x00 30. "  GMB286 ,Group Modifier Bit 286" "0,1"
bitfld.long 0x00 29. "  GMB285 ,Group Modifier Bit 285" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB284 ,Group Modifier Bit 284" "0,1"
bitfld.long 0x00 27. "  GMB283 ,Group Modifier Bit 283" "0,1"
bitfld.long 0x00 26. "  GMB282 ,Group Modifier Bit 282" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB281 ,Group Modifier Bit 281" "0,1"
bitfld.long 0x00 24. "  GMB280 ,Group Modifier Bit 280" "0,1"
bitfld.long 0x00 23. "  GMB279 ,Group Modifier Bit 279" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB278 ,Group Modifier Bit 278" "0,1"
bitfld.long 0x00 21. "  GMB277 ,Group Modifier Bit 277" "0,1"
bitfld.long 0x00 20. "  GMB276 ,Group Modifier Bit 276" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB275 ,Group Modifier Bit 275" "0,1"
bitfld.long 0x00 18. "  GMB274 ,Group Modifier Bit 274" "0,1"
bitfld.long 0x00 17. "  GMB273 ,Group Modifier Bit 273" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB272 ,Group Modifier Bit 272" "0,1"
bitfld.long 0x00 15. "  GMB271 ,Group Modifier Bit 271" "0,1"
bitfld.long 0x00 14. "  GMB270 ,Group Modifier Bit 270" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB269 ,Group Modifier Bit 269" "0,1"
bitfld.long 0x00 12. "  GMB268 ,Group Modifier Bit 268" "0,1"
bitfld.long 0x00 11. "  GMB267 ,Group Modifier Bit 267" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB266 ,Group Modifier Bit 266" "0,1"
bitfld.long 0x00 9. "  GMB265 ,Group Modifier Bit 265" "0,1"
bitfld.long 0x00 8. "  GMB264 ,Group Modifier Bit 264" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB263 ,Group Modifier Bit 263" "0,1"
bitfld.long 0x00 6. "  GMB262 ,Group Modifier Bit 262" "0,1"
bitfld.long 0x00 5. "  GMB261 ,Group Modifier Bit 261" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB260 ,Group Modifier Bit 260" "0,1"
bitfld.long 0x00 3. "  GMB259 ,Group Modifier Bit 259" "0,1"
bitfld.long 0x00 2. "  GMB258 ,Group Modifier Bit 258" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB257 ,Group Modifier Bit 257" "0,1"
bitfld.long 0x00 0. "  GMB256 ,Group Modifier Bit 256" "0,1"
else
hgroup.long 0x0D20++0x03
hide.long 0x0 "GICD_IGRPMODR8,Interrupt Group Modifier Register 8"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D24))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09))
group.long 0x0D24++0x03
line.long 0x0 "GICD_IGRPMODR9,Interrupt Group Modifier Register 9"
bitfld.long 0x00 31. " GMB319 ,Group Modifier Bit 319" "0,1"
bitfld.long 0x00 30. "  GMB318 ,Group Modifier Bit 318" "0,1"
bitfld.long 0x00 29. "  GMB317 ,Group Modifier Bit 317" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB316 ,Group Modifier Bit 316" "0,1"
bitfld.long 0x00 27. "  GMB315 ,Group Modifier Bit 315" "0,1"
bitfld.long 0x00 26. "  GMB314 ,Group Modifier Bit 314" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB313 ,Group Modifier Bit 313" "0,1"
bitfld.long 0x00 24. "  GMB312 ,Group Modifier Bit 312" "0,1"
bitfld.long 0x00 23. "  GMB311 ,Group Modifier Bit 311" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB310 ,Group Modifier Bit 310" "0,1"
bitfld.long 0x00 21. "  GMB309 ,Group Modifier Bit 309" "0,1"
bitfld.long 0x00 20. "  GMB308 ,Group Modifier Bit 308" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB307 ,Group Modifier Bit 307" "0,1"
bitfld.long 0x00 18. "  GMB306 ,Group Modifier Bit 306" "0,1"
bitfld.long 0x00 17. "  GMB305 ,Group Modifier Bit 305" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB304 ,Group Modifier Bit 304" "0,1"
bitfld.long 0x00 15. "  GMB303 ,Group Modifier Bit 303" "0,1"
bitfld.long 0x00 14. "  GMB302 ,Group Modifier Bit 302" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB301 ,Group Modifier Bit 301" "0,1"
bitfld.long 0x00 12. "  GMB300 ,Group Modifier Bit 300" "0,1"
bitfld.long 0x00 11. "  GMB299 ,Group Modifier Bit 299" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB298 ,Group Modifier Bit 298" "0,1"
bitfld.long 0x00 9. "  GMB297 ,Group Modifier Bit 297" "0,1"
bitfld.long 0x00 8. "  GMB296 ,Group Modifier Bit 296" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB295 ,Group Modifier Bit 295" "0,1"
bitfld.long 0x00 6. "  GMB294 ,Group Modifier Bit 294" "0,1"
bitfld.long 0x00 5. "  GMB293 ,Group Modifier Bit 293" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB292 ,Group Modifier Bit 292" "0,1"
bitfld.long 0x00 3. "  GMB291 ,Group Modifier Bit 291" "0,1"
bitfld.long 0x00 2. "  GMB290 ,Group Modifier Bit 290" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB289 ,Group Modifier Bit 289" "0,1"
bitfld.long 0x00 0. "  GMB288 ,Group Modifier Bit 288" "0,1"
else
hgroup.long 0x0D24++0x03
hide.long 0x0 "GICD_IGRPMODR9,Interrupt Group Modifier Register 9"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D28))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A))
group.long 0x0D28++0x03
line.long 0x0 "GICD_IGRPMODR10,Interrupt Group Modifier Register 10"
bitfld.long 0x00 31. " GMB351 ,Group Modifier Bit 351" "0,1"
bitfld.long 0x00 30. "  GMB350 ,Group Modifier Bit 350" "0,1"
bitfld.long 0x00 29. "  GMB349 ,Group Modifier Bit 349" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB348 ,Group Modifier Bit 348" "0,1"
bitfld.long 0x00 27. "  GMB347 ,Group Modifier Bit 347" "0,1"
bitfld.long 0x00 26. "  GMB346 ,Group Modifier Bit 346" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB345 ,Group Modifier Bit 345" "0,1"
bitfld.long 0x00 24. "  GMB344 ,Group Modifier Bit 344" "0,1"
bitfld.long 0x00 23. "  GMB343 ,Group Modifier Bit 343" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB342 ,Group Modifier Bit 342" "0,1"
bitfld.long 0x00 21. "  GMB341 ,Group Modifier Bit 341" "0,1"
bitfld.long 0x00 20. "  GMB340 ,Group Modifier Bit 340" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB339 ,Group Modifier Bit 339" "0,1"
bitfld.long 0x00 18. "  GMB338 ,Group Modifier Bit 338" "0,1"
bitfld.long 0x00 17. "  GMB337 ,Group Modifier Bit 337" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB336 ,Group Modifier Bit 336" "0,1"
bitfld.long 0x00 15. "  GMB335 ,Group Modifier Bit 335" "0,1"
bitfld.long 0x00 14. "  GMB334 ,Group Modifier Bit 334" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB333 ,Group Modifier Bit 333" "0,1"
bitfld.long 0x00 12. "  GMB332 ,Group Modifier Bit 332" "0,1"
bitfld.long 0x00 11. "  GMB331 ,Group Modifier Bit 331" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB330 ,Group Modifier Bit 330" "0,1"
bitfld.long 0x00 9. "  GMB329 ,Group Modifier Bit 329" "0,1"
bitfld.long 0x00 8. "  GMB328 ,Group Modifier Bit 328" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB327 ,Group Modifier Bit 327" "0,1"
bitfld.long 0x00 6. "  GMB326 ,Group Modifier Bit 326" "0,1"
bitfld.long 0x00 5. "  GMB325 ,Group Modifier Bit 325" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB324 ,Group Modifier Bit 324" "0,1"
bitfld.long 0x00 3. "  GMB323 ,Group Modifier Bit 323" "0,1"
bitfld.long 0x00 2. "  GMB322 ,Group Modifier Bit 322" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB321 ,Group Modifier Bit 321" "0,1"
bitfld.long 0x00 0. "  GMB320 ,Group Modifier Bit 320" "0,1"
else
hgroup.long 0x0D28++0x03
hide.long 0x0 "GICD_IGRPMODR10,Interrupt Group Modifier Register 10"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D2C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B))
group.long 0x0D2C++0x03
line.long 0x0 "GICD_IGRPMODR11,Interrupt Group Modifier Register 11"
bitfld.long 0x00 31. " GMB383 ,Group Modifier Bit 383" "0,1"
bitfld.long 0x00 30. "  GMB382 ,Group Modifier Bit 382" "0,1"
bitfld.long 0x00 29. "  GMB381 ,Group Modifier Bit 381" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB380 ,Group Modifier Bit 380" "0,1"
bitfld.long 0x00 27. "  GMB379 ,Group Modifier Bit 379" "0,1"
bitfld.long 0x00 26. "  GMB378 ,Group Modifier Bit 378" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB377 ,Group Modifier Bit 377" "0,1"
bitfld.long 0x00 24. "  GMB376 ,Group Modifier Bit 376" "0,1"
bitfld.long 0x00 23. "  GMB375 ,Group Modifier Bit 375" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB374 ,Group Modifier Bit 374" "0,1"
bitfld.long 0x00 21. "  GMB373 ,Group Modifier Bit 373" "0,1"
bitfld.long 0x00 20. "  GMB372 ,Group Modifier Bit 372" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB371 ,Group Modifier Bit 371" "0,1"
bitfld.long 0x00 18. "  GMB370 ,Group Modifier Bit 370" "0,1"
bitfld.long 0x00 17. "  GMB369 ,Group Modifier Bit 369" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB368 ,Group Modifier Bit 368" "0,1"
bitfld.long 0x00 15. "  GMB367 ,Group Modifier Bit 367" "0,1"
bitfld.long 0x00 14. "  GMB366 ,Group Modifier Bit 366" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB365 ,Group Modifier Bit 365" "0,1"
bitfld.long 0x00 12. "  GMB364 ,Group Modifier Bit 364" "0,1"
bitfld.long 0x00 11. "  GMB363 ,Group Modifier Bit 363" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB362 ,Group Modifier Bit 362" "0,1"
bitfld.long 0x00 9. "  GMB361 ,Group Modifier Bit 361" "0,1"
bitfld.long 0x00 8. "  GMB360 ,Group Modifier Bit 360" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB359 ,Group Modifier Bit 359" "0,1"
bitfld.long 0x00 6. "  GMB358 ,Group Modifier Bit 358" "0,1"
bitfld.long 0x00 5. "  GMB357 ,Group Modifier Bit 357" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB356 ,Group Modifier Bit 356" "0,1"
bitfld.long 0x00 3. "  GMB355 ,Group Modifier Bit 355" "0,1"
bitfld.long 0x00 2. "  GMB354 ,Group Modifier Bit 354" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB353 ,Group Modifier Bit 353" "0,1"
bitfld.long 0x00 0. "  GMB352 ,Group Modifier Bit 352" "0,1"
else
hgroup.long 0x0D2C++0x03
hide.long 0x0 "GICD_IGRPMODR11,Interrupt Group Modifier Register 11"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D30))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C))
group.long 0x0D30++0x03
line.long 0x0 "GICD_IGRPMODR12,Interrupt Group Modifier Register 12"
bitfld.long 0x00 31. " GMB415 ,Group Modifier Bit 415" "0,1"
bitfld.long 0x00 30. "  GMB414 ,Group Modifier Bit 414" "0,1"
bitfld.long 0x00 29. "  GMB413 ,Group Modifier Bit 413" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB412 ,Group Modifier Bit 412" "0,1"
bitfld.long 0x00 27. "  GMB411 ,Group Modifier Bit 411" "0,1"
bitfld.long 0x00 26. "  GMB410 ,Group Modifier Bit 410" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB409 ,Group Modifier Bit 409" "0,1"
bitfld.long 0x00 24. "  GMB408 ,Group Modifier Bit 408" "0,1"
bitfld.long 0x00 23. "  GMB407 ,Group Modifier Bit 407" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB406 ,Group Modifier Bit 406" "0,1"
bitfld.long 0x00 21. "  GMB405 ,Group Modifier Bit 405" "0,1"
bitfld.long 0x00 20. "  GMB404 ,Group Modifier Bit 404" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB403 ,Group Modifier Bit 403" "0,1"
bitfld.long 0x00 18. "  GMB402 ,Group Modifier Bit 402" "0,1"
bitfld.long 0x00 17. "  GMB401 ,Group Modifier Bit 401" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB400 ,Group Modifier Bit 400" "0,1"
bitfld.long 0x00 15. "  GMB399 ,Group Modifier Bit 399" "0,1"
bitfld.long 0x00 14. "  GMB398 ,Group Modifier Bit 398" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB397 ,Group Modifier Bit 397" "0,1"
bitfld.long 0x00 12. "  GMB396 ,Group Modifier Bit 396" "0,1"
bitfld.long 0x00 11. "  GMB395 ,Group Modifier Bit 395" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB394 ,Group Modifier Bit 394" "0,1"
bitfld.long 0x00 9. "  GMB393 ,Group Modifier Bit 393" "0,1"
bitfld.long 0x00 8. "  GMB392 ,Group Modifier Bit 392" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB391 ,Group Modifier Bit 391" "0,1"
bitfld.long 0x00 6. "  GMB390 ,Group Modifier Bit 390" "0,1"
bitfld.long 0x00 5. "  GMB389 ,Group Modifier Bit 389" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB388 ,Group Modifier Bit 388" "0,1"
bitfld.long 0x00 3. "  GMB387 ,Group Modifier Bit 387" "0,1"
bitfld.long 0x00 2. "  GMB386 ,Group Modifier Bit 386" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB385 ,Group Modifier Bit 385" "0,1"
bitfld.long 0x00 0. "  GMB384 ,Group Modifier Bit 384" "0,1"
else
hgroup.long 0x0D30++0x03
hide.long 0x0 "GICD_IGRPMODR12,Interrupt Group Modifier Register 12"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D34))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D))
group.long 0x0D34++0x03
line.long 0x0 "GICD_IGRPMODR13,Interrupt Group Modifier Register 13"
bitfld.long 0x00 31. " GMB447 ,Group Modifier Bit 447" "0,1"
bitfld.long 0x00 30. "  GMB446 ,Group Modifier Bit 446" "0,1"
bitfld.long 0x00 29. "  GMB445 ,Group Modifier Bit 445" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB444 ,Group Modifier Bit 444" "0,1"
bitfld.long 0x00 27. "  GMB443 ,Group Modifier Bit 443" "0,1"
bitfld.long 0x00 26. "  GMB442 ,Group Modifier Bit 442" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB441 ,Group Modifier Bit 441" "0,1"
bitfld.long 0x00 24. "  GMB440 ,Group Modifier Bit 440" "0,1"
bitfld.long 0x00 23. "  GMB439 ,Group Modifier Bit 439" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB438 ,Group Modifier Bit 438" "0,1"
bitfld.long 0x00 21. "  GMB437 ,Group Modifier Bit 437" "0,1"
bitfld.long 0x00 20. "  GMB436 ,Group Modifier Bit 436" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB435 ,Group Modifier Bit 435" "0,1"
bitfld.long 0x00 18. "  GMB434 ,Group Modifier Bit 434" "0,1"
bitfld.long 0x00 17. "  GMB433 ,Group Modifier Bit 433" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB432 ,Group Modifier Bit 432" "0,1"
bitfld.long 0x00 15. "  GMB431 ,Group Modifier Bit 431" "0,1"
bitfld.long 0x00 14. "  GMB430 ,Group Modifier Bit 430" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB429 ,Group Modifier Bit 429" "0,1"
bitfld.long 0x00 12. "  GMB428 ,Group Modifier Bit 428" "0,1"
bitfld.long 0x00 11. "  GMB427 ,Group Modifier Bit 427" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB426 ,Group Modifier Bit 426" "0,1"
bitfld.long 0x00 9. "  GMB425 ,Group Modifier Bit 425" "0,1"
bitfld.long 0x00 8. "  GMB424 ,Group Modifier Bit 424" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB423 ,Group Modifier Bit 423" "0,1"
bitfld.long 0x00 6. "  GMB422 ,Group Modifier Bit 422" "0,1"
bitfld.long 0x00 5. "  GMB421 ,Group Modifier Bit 421" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB420 ,Group Modifier Bit 420" "0,1"
bitfld.long 0x00 3. "  GMB419 ,Group Modifier Bit 419" "0,1"
bitfld.long 0x00 2. "  GMB418 ,Group Modifier Bit 418" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB417 ,Group Modifier Bit 417" "0,1"
bitfld.long 0x00 0. "  GMB416 ,Group Modifier Bit 416" "0,1"
else
hgroup.long 0x0D34++0x03
hide.long 0x0 "GICD_IGRPMODR13,Interrupt Group Modifier Register 13"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D38))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E))
group.long 0x0D38++0x03
line.long 0x0 "GICD_IGRPMODR14,Interrupt Group Modifier Register 14"
bitfld.long 0x00 31. " GMB479 ,Group Modifier Bit 479" "0,1"
bitfld.long 0x00 30. "  GMB478 ,Group Modifier Bit 478" "0,1"
bitfld.long 0x00 29. "  GMB477 ,Group Modifier Bit 477" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB476 ,Group Modifier Bit 476" "0,1"
bitfld.long 0x00 27. "  GMB475 ,Group Modifier Bit 475" "0,1"
bitfld.long 0x00 26. "  GMB474 ,Group Modifier Bit 474" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB473 ,Group Modifier Bit 473" "0,1"
bitfld.long 0x00 24. "  GMB472 ,Group Modifier Bit 472" "0,1"
bitfld.long 0x00 23. "  GMB471 ,Group Modifier Bit 471" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB470 ,Group Modifier Bit 470" "0,1"
bitfld.long 0x00 21. "  GMB469 ,Group Modifier Bit 469" "0,1"
bitfld.long 0x00 20. "  GMB468 ,Group Modifier Bit 468" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB467 ,Group Modifier Bit 467" "0,1"
bitfld.long 0x00 18. "  GMB466 ,Group Modifier Bit 466" "0,1"
bitfld.long 0x00 17. "  GMB465 ,Group Modifier Bit 465" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB464 ,Group Modifier Bit 464" "0,1"
bitfld.long 0x00 15. "  GMB463 ,Group Modifier Bit 463" "0,1"
bitfld.long 0x00 14. "  GMB462 ,Group Modifier Bit 462" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB461 ,Group Modifier Bit 461" "0,1"
bitfld.long 0x00 12. "  GMB460 ,Group Modifier Bit 460" "0,1"
bitfld.long 0x00 11. "  GMB459 ,Group Modifier Bit 459" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB458 ,Group Modifier Bit 458" "0,1"
bitfld.long 0x00 9. "  GMB457 ,Group Modifier Bit 457" "0,1"
bitfld.long 0x00 8. "  GMB456 ,Group Modifier Bit 456" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB455 ,Group Modifier Bit 455" "0,1"
bitfld.long 0x00 6. "  GMB454 ,Group Modifier Bit 454" "0,1"
bitfld.long 0x00 5. "  GMB453 ,Group Modifier Bit 453" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB452 ,Group Modifier Bit 452" "0,1"
bitfld.long 0x00 3. "  GMB451 ,Group Modifier Bit 451" "0,1"
bitfld.long 0x00 2. "  GMB450 ,Group Modifier Bit 450" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB449 ,Group Modifier Bit 449" "0,1"
bitfld.long 0x00 0. "  GMB448 ,Group Modifier Bit 448" "0,1"
else
hgroup.long 0x0D38++0x03
hide.long 0x0 "GICD_IGRPMODR14,Interrupt Group Modifier Register 14"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D3C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F))
group.long 0x0D3C++0x03
line.long 0x0 "GICD_IGRPMODR15,Interrupt Group Modifier Register 15"
bitfld.long 0x00 31. " GMB511 ,Group Modifier Bit 511" "0,1"
bitfld.long 0x00 30. "  GMB510 ,Group Modifier Bit 510" "0,1"
bitfld.long 0x00 29. "  GMB509 ,Group Modifier Bit 509" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB508 ,Group Modifier Bit 508" "0,1"
bitfld.long 0x00 27. "  GMB507 ,Group Modifier Bit 507" "0,1"
bitfld.long 0x00 26. "  GMB506 ,Group Modifier Bit 506" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB505 ,Group Modifier Bit 505" "0,1"
bitfld.long 0x00 24. "  GMB504 ,Group Modifier Bit 504" "0,1"
bitfld.long 0x00 23. "  GMB503 ,Group Modifier Bit 503" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB502 ,Group Modifier Bit 502" "0,1"
bitfld.long 0x00 21. "  GMB501 ,Group Modifier Bit 501" "0,1"
bitfld.long 0x00 20. "  GMB500 ,Group Modifier Bit 500" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB499 ,Group Modifier Bit 499" "0,1"
bitfld.long 0x00 18. "  GMB498 ,Group Modifier Bit 498" "0,1"
bitfld.long 0x00 17. "  GMB497 ,Group Modifier Bit 497" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB496 ,Group Modifier Bit 496" "0,1"
bitfld.long 0x00 15. "  GMB495 ,Group Modifier Bit 495" "0,1"
bitfld.long 0x00 14. "  GMB494 ,Group Modifier Bit 494" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB493 ,Group Modifier Bit 493" "0,1"
bitfld.long 0x00 12. "  GMB492 ,Group Modifier Bit 492" "0,1"
bitfld.long 0x00 11. "  GMB491 ,Group Modifier Bit 491" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB490 ,Group Modifier Bit 490" "0,1"
bitfld.long 0x00 9. "  GMB489 ,Group Modifier Bit 489" "0,1"
bitfld.long 0x00 8. "  GMB488 ,Group Modifier Bit 488" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB487 ,Group Modifier Bit 487" "0,1"
bitfld.long 0x00 6. "  GMB486 ,Group Modifier Bit 486" "0,1"
bitfld.long 0x00 5. "  GMB485 ,Group Modifier Bit 485" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB484 ,Group Modifier Bit 484" "0,1"
bitfld.long 0x00 3. "  GMB483 ,Group Modifier Bit 483" "0,1"
bitfld.long 0x00 2. "  GMB482 ,Group Modifier Bit 482" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB481 ,Group Modifier Bit 481" "0,1"
bitfld.long 0x00 0. "  GMB480 ,Group Modifier Bit 480" "0,1"
else
hgroup.long 0x0D3C++0x03
hide.long 0x0 "GICD_IGRPMODR15,Interrupt Group Modifier Register 15"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D40))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10))
group.long 0x0D40++0x03
line.long 0x0 "GICD_IGRPMODR16,Interrupt Group Modifier Register 16"
bitfld.long 0x00 31. " GMB543 ,Group Modifier Bit 543" "0,1"
bitfld.long 0x00 30. "  GMB542 ,Group Modifier Bit 542" "0,1"
bitfld.long 0x00 29. "  GMB541 ,Group Modifier Bit 541" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB540 ,Group Modifier Bit 540" "0,1"
bitfld.long 0x00 27. "  GMB539 ,Group Modifier Bit 539" "0,1"
bitfld.long 0x00 26. "  GMB538 ,Group Modifier Bit 538" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB537 ,Group Modifier Bit 537" "0,1"
bitfld.long 0x00 24. "  GMB536 ,Group Modifier Bit 536" "0,1"
bitfld.long 0x00 23. "  GMB535 ,Group Modifier Bit 535" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB534 ,Group Modifier Bit 534" "0,1"
bitfld.long 0x00 21. "  GMB533 ,Group Modifier Bit 533" "0,1"
bitfld.long 0x00 20. "  GMB532 ,Group Modifier Bit 532" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB531 ,Group Modifier Bit 531" "0,1"
bitfld.long 0x00 18. "  GMB530 ,Group Modifier Bit 530" "0,1"
bitfld.long 0x00 17. "  GMB529 ,Group Modifier Bit 529" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB528 ,Group Modifier Bit 528" "0,1"
bitfld.long 0x00 15. "  GMB527 ,Group Modifier Bit 527" "0,1"
bitfld.long 0x00 14. "  GMB526 ,Group Modifier Bit 526" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB525 ,Group Modifier Bit 525" "0,1"
bitfld.long 0x00 12. "  GMB524 ,Group Modifier Bit 524" "0,1"
bitfld.long 0x00 11. "  GMB523 ,Group Modifier Bit 523" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB522 ,Group Modifier Bit 522" "0,1"
bitfld.long 0x00 9. "  GMB521 ,Group Modifier Bit 521" "0,1"
bitfld.long 0x00 8. "  GMB520 ,Group Modifier Bit 520" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB519 ,Group Modifier Bit 519" "0,1"
bitfld.long 0x00 6. "  GMB518 ,Group Modifier Bit 518" "0,1"
bitfld.long 0x00 5. "  GMB517 ,Group Modifier Bit 517" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB516 ,Group Modifier Bit 516" "0,1"
bitfld.long 0x00 3. "  GMB515 ,Group Modifier Bit 515" "0,1"
bitfld.long 0x00 2. "  GMB514 ,Group Modifier Bit 514" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB513 ,Group Modifier Bit 513" "0,1"
bitfld.long 0x00 0. "  GMB512 ,Group Modifier Bit 512" "0,1"
else
hgroup.long 0x0D40++0x03
hide.long 0x0 "GICD_IGRPMODR16,Interrupt Group Modifier Register 16"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D44))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11))
group.long 0x0D44++0x03
line.long 0x0 "GICD_IGRPMODR17,Interrupt Group Modifier Register 17"
bitfld.long 0x00 31. " GMB575 ,Group Modifier Bit 575" "0,1"
bitfld.long 0x00 30. "  GMB574 ,Group Modifier Bit 574" "0,1"
bitfld.long 0x00 29. "  GMB573 ,Group Modifier Bit 573" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB572 ,Group Modifier Bit 572" "0,1"
bitfld.long 0x00 27. "  GMB571 ,Group Modifier Bit 571" "0,1"
bitfld.long 0x00 26. "  GMB570 ,Group Modifier Bit 570" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB569 ,Group Modifier Bit 569" "0,1"
bitfld.long 0x00 24. "  GMB568 ,Group Modifier Bit 568" "0,1"
bitfld.long 0x00 23. "  GMB567 ,Group Modifier Bit 567" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB566 ,Group Modifier Bit 566" "0,1"
bitfld.long 0x00 21. "  GMB565 ,Group Modifier Bit 565" "0,1"
bitfld.long 0x00 20. "  GMB564 ,Group Modifier Bit 564" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB563 ,Group Modifier Bit 563" "0,1"
bitfld.long 0x00 18. "  GMB562 ,Group Modifier Bit 562" "0,1"
bitfld.long 0x00 17. "  GMB561 ,Group Modifier Bit 561" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB560 ,Group Modifier Bit 560" "0,1"
bitfld.long 0x00 15. "  GMB559 ,Group Modifier Bit 559" "0,1"
bitfld.long 0x00 14. "  GMB558 ,Group Modifier Bit 558" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB557 ,Group Modifier Bit 557" "0,1"
bitfld.long 0x00 12. "  GMB556 ,Group Modifier Bit 556" "0,1"
bitfld.long 0x00 11. "  GMB555 ,Group Modifier Bit 555" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB554 ,Group Modifier Bit 554" "0,1"
bitfld.long 0x00 9. "  GMB553 ,Group Modifier Bit 553" "0,1"
bitfld.long 0x00 8. "  GMB552 ,Group Modifier Bit 552" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB551 ,Group Modifier Bit 551" "0,1"
bitfld.long 0x00 6. "  GMB550 ,Group Modifier Bit 550" "0,1"
bitfld.long 0x00 5. "  GMB549 ,Group Modifier Bit 549" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB548 ,Group Modifier Bit 548" "0,1"
bitfld.long 0x00 3. "  GMB547 ,Group Modifier Bit 547" "0,1"
bitfld.long 0x00 2. "  GMB546 ,Group Modifier Bit 546" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB545 ,Group Modifier Bit 545" "0,1"
bitfld.long 0x00 0. "  GMB544 ,Group Modifier Bit 544" "0,1"
else
hgroup.long 0x0D44++0x03
hide.long 0x0 "GICD_IGRPMODR17,Interrupt Group Modifier Register 17"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D48))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12))
group.long 0x0D48++0x03
line.long 0x0 "GICD_IGRPMODR18,Interrupt Group Modifier Register 18"
bitfld.long 0x00 31. " GMB607 ,Group Modifier Bit 607" "0,1"
bitfld.long 0x00 30. "  GMB606 ,Group Modifier Bit 606" "0,1"
bitfld.long 0x00 29. "  GMB605 ,Group Modifier Bit 605" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB604 ,Group Modifier Bit 604" "0,1"
bitfld.long 0x00 27. "  GMB603 ,Group Modifier Bit 603" "0,1"
bitfld.long 0x00 26. "  GMB602 ,Group Modifier Bit 602" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB601 ,Group Modifier Bit 601" "0,1"
bitfld.long 0x00 24. "  GMB600 ,Group Modifier Bit 600" "0,1"
bitfld.long 0x00 23. "  GMB599 ,Group Modifier Bit 599" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB598 ,Group Modifier Bit 598" "0,1"
bitfld.long 0x00 21. "  GMB597 ,Group Modifier Bit 597" "0,1"
bitfld.long 0x00 20. "  GMB596 ,Group Modifier Bit 596" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB595 ,Group Modifier Bit 595" "0,1"
bitfld.long 0x00 18. "  GMB594 ,Group Modifier Bit 594" "0,1"
bitfld.long 0x00 17. "  GMB593 ,Group Modifier Bit 593" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB592 ,Group Modifier Bit 592" "0,1"
bitfld.long 0x00 15. "  GMB591 ,Group Modifier Bit 591" "0,1"
bitfld.long 0x00 14. "  GMB590 ,Group Modifier Bit 590" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB589 ,Group Modifier Bit 589" "0,1"
bitfld.long 0x00 12. "  GMB588 ,Group Modifier Bit 588" "0,1"
bitfld.long 0x00 11. "  GMB587 ,Group Modifier Bit 587" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB586 ,Group Modifier Bit 586" "0,1"
bitfld.long 0x00 9. "  GMB585 ,Group Modifier Bit 585" "0,1"
bitfld.long 0x00 8. "  GMB584 ,Group Modifier Bit 584" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB583 ,Group Modifier Bit 583" "0,1"
bitfld.long 0x00 6. "  GMB582 ,Group Modifier Bit 582" "0,1"
bitfld.long 0x00 5. "  GMB581 ,Group Modifier Bit 581" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB580 ,Group Modifier Bit 580" "0,1"
bitfld.long 0x00 3. "  GMB579 ,Group Modifier Bit 579" "0,1"
bitfld.long 0x00 2. "  GMB578 ,Group Modifier Bit 578" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB577 ,Group Modifier Bit 577" "0,1"
bitfld.long 0x00 0. "  GMB576 ,Group Modifier Bit 576" "0,1"
else
hgroup.long 0x0D48++0x03
hide.long 0x0 "GICD_IGRPMODR18,Interrupt Group Modifier Register 18"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D4C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13))
group.long 0x0D4C++0x03
line.long 0x0 "GICD_IGRPMODR19,Interrupt Group Modifier Register 19"
bitfld.long 0x00 31. " GMB639 ,Group Modifier Bit 639" "0,1"
bitfld.long 0x00 30. "  GMB638 ,Group Modifier Bit 638" "0,1"
bitfld.long 0x00 29. "  GMB637 ,Group Modifier Bit 637" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB636 ,Group Modifier Bit 636" "0,1"
bitfld.long 0x00 27. "  GMB635 ,Group Modifier Bit 635" "0,1"
bitfld.long 0x00 26. "  GMB634 ,Group Modifier Bit 634" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB633 ,Group Modifier Bit 633" "0,1"
bitfld.long 0x00 24. "  GMB632 ,Group Modifier Bit 632" "0,1"
bitfld.long 0x00 23. "  GMB631 ,Group Modifier Bit 631" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB630 ,Group Modifier Bit 630" "0,1"
bitfld.long 0x00 21. "  GMB629 ,Group Modifier Bit 629" "0,1"
bitfld.long 0x00 20. "  GMB628 ,Group Modifier Bit 628" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB627 ,Group Modifier Bit 627" "0,1"
bitfld.long 0x00 18. "  GMB626 ,Group Modifier Bit 626" "0,1"
bitfld.long 0x00 17. "  GMB625 ,Group Modifier Bit 625" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB624 ,Group Modifier Bit 624" "0,1"
bitfld.long 0x00 15. "  GMB623 ,Group Modifier Bit 623" "0,1"
bitfld.long 0x00 14. "  GMB622 ,Group Modifier Bit 622" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB621 ,Group Modifier Bit 621" "0,1"
bitfld.long 0x00 12. "  GMB620 ,Group Modifier Bit 620" "0,1"
bitfld.long 0x00 11. "  GMB619 ,Group Modifier Bit 619" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB618 ,Group Modifier Bit 618" "0,1"
bitfld.long 0x00 9. "  GMB617 ,Group Modifier Bit 617" "0,1"
bitfld.long 0x00 8. "  GMB616 ,Group Modifier Bit 616" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB615 ,Group Modifier Bit 615" "0,1"
bitfld.long 0x00 6. "  GMB614 ,Group Modifier Bit 614" "0,1"
bitfld.long 0x00 5. "  GMB613 ,Group Modifier Bit 613" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB612 ,Group Modifier Bit 612" "0,1"
bitfld.long 0x00 3. "  GMB611 ,Group Modifier Bit 611" "0,1"
bitfld.long 0x00 2. "  GMB610 ,Group Modifier Bit 610" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB609 ,Group Modifier Bit 609" "0,1"
bitfld.long 0x00 0. "  GMB608 ,Group Modifier Bit 608" "0,1"
else
hgroup.long 0x0D4C++0x03
hide.long 0x0 "GICD_IGRPMODR19,Interrupt Group Modifier Register 19"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D50))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14))
group.long 0x0D50++0x03
line.long 0x0 "GICD_IGRPMODR20,Interrupt Group Modifier Register 20"
bitfld.long 0x00 31. " GMB671 ,Group Modifier Bit 671" "0,1"
bitfld.long 0x00 30. "  GMB670 ,Group Modifier Bit 670" "0,1"
bitfld.long 0x00 29. "  GMB669 ,Group Modifier Bit 669" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB668 ,Group Modifier Bit 668" "0,1"
bitfld.long 0x00 27. "  GMB667 ,Group Modifier Bit 667" "0,1"
bitfld.long 0x00 26. "  GMB666 ,Group Modifier Bit 666" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB665 ,Group Modifier Bit 665" "0,1"
bitfld.long 0x00 24. "  GMB664 ,Group Modifier Bit 664" "0,1"
bitfld.long 0x00 23. "  GMB663 ,Group Modifier Bit 663" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB662 ,Group Modifier Bit 662" "0,1"
bitfld.long 0x00 21. "  GMB661 ,Group Modifier Bit 661" "0,1"
bitfld.long 0x00 20. "  GMB660 ,Group Modifier Bit 660" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB659 ,Group Modifier Bit 659" "0,1"
bitfld.long 0x00 18. "  GMB658 ,Group Modifier Bit 658" "0,1"
bitfld.long 0x00 17. "  GMB657 ,Group Modifier Bit 657" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB656 ,Group Modifier Bit 656" "0,1"
bitfld.long 0x00 15. "  GMB655 ,Group Modifier Bit 655" "0,1"
bitfld.long 0x00 14. "  GMB654 ,Group Modifier Bit 654" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB653 ,Group Modifier Bit 653" "0,1"
bitfld.long 0x00 12. "  GMB652 ,Group Modifier Bit 652" "0,1"
bitfld.long 0x00 11. "  GMB651 ,Group Modifier Bit 651" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB650 ,Group Modifier Bit 650" "0,1"
bitfld.long 0x00 9. "  GMB649 ,Group Modifier Bit 649" "0,1"
bitfld.long 0x00 8. "  GMB648 ,Group Modifier Bit 648" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB647 ,Group Modifier Bit 647" "0,1"
bitfld.long 0x00 6. "  GMB646 ,Group Modifier Bit 646" "0,1"
bitfld.long 0x00 5. "  GMB645 ,Group Modifier Bit 645" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB644 ,Group Modifier Bit 644" "0,1"
bitfld.long 0x00 3. "  GMB643 ,Group Modifier Bit 643" "0,1"
bitfld.long 0x00 2. "  GMB642 ,Group Modifier Bit 642" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB641 ,Group Modifier Bit 641" "0,1"
bitfld.long 0x00 0. "  GMB640 ,Group Modifier Bit 640" "0,1"
else
hgroup.long 0x0D50++0x03
hide.long 0x0 "GICD_IGRPMODR20,Interrupt Group Modifier Register 20"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D54))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15))
group.long 0x0D54++0x03
line.long 0x0 "GICD_IGRPMODR21,Interrupt Group Modifier Register 21"
bitfld.long 0x00 31. " GMB703 ,Group Modifier Bit 703" "0,1"
bitfld.long 0x00 30. "  GMB702 ,Group Modifier Bit 702" "0,1"
bitfld.long 0x00 29. "  GMB701 ,Group Modifier Bit 701" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB700 ,Group Modifier Bit 700" "0,1"
bitfld.long 0x00 27. "  GMB699 ,Group Modifier Bit 699" "0,1"
bitfld.long 0x00 26. "  GMB698 ,Group Modifier Bit 698" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB697 ,Group Modifier Bit 697" "0,1"
bitfld.long 0x00 24. "  GMB696 ,Group Modifier Bit 696" "0,1"
bitfld.long 0x00 23. "  GMB695 ,Group Modifier Bit 695" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB694 ,Group Modifier Bit 694" "0,1"
bitfld.long 0x00 21. "  GMB693 ,Group Modifier Bit 693" "0,1"
bitfld.long 0x00 20. "  GMB692 ,Group Modifier Bit 692" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB691 ,Group Modifier Bit 691" "0,1"
bitfld.long 0x00 18. "  GMB690 ,Group Modifier Bit 690" "0,1"
bitfld.long 0x00 17. "  GMB689 ,Group Modifier Bit 689" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB688 ,Group Modifier Bit 688" "0,1"
bitfld.long 0x00 15. "  GMB687 ,Group Modifier Bit 687" "0,1"
bitfld.long 0x00 14. "  GMB686 ,Group Modifier Bit 686" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB685 ,Group Modifier Bit 685" "0,1"
bitfld.long 0x00 12. "  GMB684 ,Group Modifier Bit 684" "0,1"
bitfld.long 0x00 11. "  GMB683 ,Group Modifier Bit 683" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB682 ,Group Modifier Bit 682" "0,1"
bitfld.long 0x00 9. "  GMB681 ,Group Modifier Bit 681" "0,1"
bitfld.long 0x00 8. "  GMB680 ,Group Modifier Bit 680" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB679 ,Group Modifier Bit 679" "0,1"
bitfld.long 0x00 6. "  GMB678 ,Group Modifier Bit 678" "0,1"
bitfld.long 0x00 5. "  GMB677 ,Group Modifier Bit 677" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB676 ,Group Modifier Bit 676" "0,1"
bitfld.long 0x00 3. "  GMB675 ,Group Modifier Bit 675" "0,1"
bitfld.long 0x00 2. "  GMB674 ,Group Modifier Bit 674" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB673 ,Group Modifier Bit 673" "0,1"
bitfld.long 0x00 0. "  GMB672 ,Group Modifier Bit 672" "0,1"
else
hgroup.long 0x0D54++0x03
hide.long 0x0 "GICD_IGRPMODR21,Interrupt Group Modifier Register 21"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D58))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16))
group.long 0x0D58++0x03
line.long 0x0 "GICD_IGRPMODR22,Interrupt Group Modifier Register 22"
bitfld.long 0x00 31. " GMB735 ,Group Modifier Bit 735" "0,1"
bitfld.long 0x00 30. "  GMB734 ,Group Modifier Bit 734" "0,1"
bitfld.long 0x00 29. "  GMB733 ,Group Modifier Bit 733" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB732 ,Group Modifier Bit 732" "0,1"
bitfld.long 0x00 27. "  GMB731 ,Group Modifier Bit 731" "0,1"
bitfld.long 0x00 26. "  GMB730 ,Group Modifier Bit 730" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB729 ,Group Modifier Bit 729" "0,1"
bitfld.long 0x00 24. "  GMB728 ,Group Modifier Bit 728" "0,1"
bitfld.long 0x00 23. "  GMB727 ,Group Modifier Bit 727" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB726 ,Group Modifier Bit 726" "0,1"
bitfld.long 0x00 21. "  GMB725 ,Group Modifier Bit 725" "0,1"
bitfld.long 0x00 20. "  GMB724 ,Group Modifier Bit 724" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB723 ,Group Modifier Bit 723" "0,1"
bitfld.long 0x00 18. "  GMB722 ,Group Modifier Bit 722" "0,1"
bitfld.long 0x00 17. "  GMB721 ,Group Modifier Bit 721" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB720 ,Group Modifier Bit 720" "0,1"
bitfld.long 0x00 15. "  GMB719 ,Group Modifier Bit 719" "0,1"
bitfld.long 0x00 14. "  GMB718 ,Group Modifier Bit 718" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB717 ,Group Modifier Bit 717" "0,1"
bitfld.long 0x00 12. "  GMB716 ,Group Modifier Bit 716" "0,1"
bitfld.long 0x00 11. "  GMB715 ,Group Modifier Bit 715" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB714 ,Group Modifier Bit 714" "0,1"
bitfld.long 0x00 9. "  GMB713 ,Group Modifier Bit 713" "0,1"
bitfld.long 0x00 8. "  GMB712 ,Group Modifier Bit 712" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB711 ,Group Modifier Bit 711" "0,1"
bitfld.long 0x00 6. "  GMB710 ,Group Modifier Bit 710" "0,1"
bitfld.long 0x00 5. "  GMB709 ,Group Modifier Bit 709" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB708 ,Group Modifier Bit 708" "0,1"
bitfld.long 0x00 3. "  GMB707 ,Group Modifier Bit 707" "0,1"
bitfld.long 0x00 2. "  GMB706 ,Group Modifier Bit 706" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB705 ,Group Modifier Bit 705" "0,1"
bitfld.long 0x00 0. "  GMB704 ,Group Modifier Bit 704" "0,1"
else
hgroup.long 0x0D58++0x03
hide.long 0x0 "GICD_IGRPMODR22,Interrupt Group Modifier Register 22"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D5C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17))
group.long 0x0D5C++0x03
line.long 0x0 "GICD_IGRPMODR23,Interrupt Group Modifier Register 23"
bitfld.long 0x00 31. " GMB767 ,Group Modifier Bit 767" "0,1"
bitfld.long 0x00 30. "  GMB766 ,Group Modifier Bit 766" "0,1"
bitfld.long 0x00 29. "  GMB765 ,Group Modifier Bit 765" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB764 ,Group Modifier Bit 764" "0,1"
bitfld.long 0x00 27. "  GMB763 ,Group Modifier Bit 763" "0,1"
bitfld.long 0x00 26. "  GMB762 ,Group Modifier Bit 762" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB761 ,Group Modifier Bit 761" "0,1"
bitfld.long 0x00 24. "  GMB760 ,Group Modifier Bit 760" "0,1"
bitfld.long 0x00 23. "  GMB759 ,Group Modifier Bit 759" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB758 ,Group Modifier Bit 758" "0,1"
bitfld.long 0x00 21. "  GMB757 ,Group Modifier Bit 757" "0,1"
bitfld.long 0x00 20. "  GMB756 ,Group Modifier Bit 756" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB755 ,Group Modifier Bit 755" "0,1"
bitfld.long 0x00 18. "  GMB754 ,Group Modifier Bit 754" "0,1"
bitfld.long 0x00 17. "  GMB753 ,Group Modifier Bit 753" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB752 ,Group Modifier Bit 752" "0,1"
bitfld.long 0x00 15. "  GMB751 ,Group Modifier Bit 751" "0,1"
bitfld.long 0x00 14. "  GMB750 ,Group Modifier Bit 750" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB749 ,Group Modifier Bit 749" "0,1"
bitfld.long 0x00 12. "  GMB748 ,Group Modifier Bit 748" "0,1"
bitfld.long 0x00 11. "  GMB747 ,Group Modifier Bit 747" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB746 ,Group Modifier Bit 746" "0,1"
bitfld.long 0x00 9. "  GMB745 ,Group Modifier Bit 745" "0,1"
bitfld.long 0x00 8. "  GMB744 ,Group Modifier Bit 744" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB743 ,Group Modifier Bit 743" "0,1"
bitfld.long 0x00 6. "  GMB742 ,Group Modifier Bit 742" "0,1"
bitfld.long 0x00 5. "  GMB741 ,Group Modifier Bit 741" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB740 ,Group Modifier Bit 740" "0,1"
bitfld.long 0x00 3. "  GMB739 ,Group Modifier Bit 739" "0,1"
bitfld.long 0x00 2. "  GMB738 ,Group Modifier Bit 738" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB737 ,Group Modifier Bit 737" "0,1"
bitfld.long 0x00 0. "  GMB736 ,Group Modifier Bit 736" "0,1"
else
hgroup.long 0x0D5C++0x03
hide.long 0x0 "GICD_IGRPMODR23,Interrupt Group Modifier Register 23"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D60))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18))
group.long 0x0D60++0x03
line.long 0x0 "GICD_IGRPMODR24,Interrupt Group Modifier Register 24"
bitfld.long 0x00 31. " GMB799 ,Group Modifier Bit 799" "0,1"
bitfld.long 0x00 30. "  GMB798 ,Group Modifier Bit 798" "0,1"
bitfld.long 0x00 29. "  GMB797 ,Group Modifier Bit 797" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB796 ,Group Modifier Bit 796" "0,1"
bitfld.long 0x00 27. "  GMB795 ,Group Modifier Bit 795" "0,1"
bitfld.long 0x00 26. "  GMB794 ,Group Modifier Bit 794" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB793 ,Group Modifier Bit 793" "0,1"
bitfld.long 0x00 24. "  GMB792 ,Group Modifier Bit 792" "0,1"
bitfld.long 0x00 23. "  GMB791 ,Group Modifier Bit 791" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB790 ,Group Modifier Bit 790" "0,1"
bitfld.long 0x00 21. "  GMB789 ,Group Modifier Bit 789" "0,1"
bitfld.long 0x00 20. "  GMB788 ,Group Modifier Bit 788" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB787 ,Group Modifier Bit 787" "0,1"
bitfld.long 0x00 18. "  GMB786 ,Group Modifier Bit 786" "0,1"
bitfld.long 0x00 17. "  GMB785 ,Group Modifier Bit 785" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB784 ,Group Modifier Bit 784" "0,1"
bitfld.long 0x00 15. "  GMB783 ,Group Modifier Bit 783" "0,1"
bitfld.long 0x00 14. "  GMB782 ,Group Modifier Bit 782" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB781 ,Group Modifier Bit 781" "0,1"
bitfld.long 0x00 12. "  GMB780 ,Group Modifier Bit 780" "0,1"
bitfld.long 0x00 11. "  GMB779 ,Group Modifier Bit 779" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB778 ,Group Modifier Bit 778" "0,1"
bitfld.long 0x00 9. "  GMB777 ,Group Modifier Bit 777" "0,1"
bitfld.long 0x00 8. "  GMB776 ,Group Modifier Bit 776" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB775 ,Group Modifier Bit 775" "0,1"
bitfld.long 0x00 6. "  GMB774 ,Group Modifier Bit 774" "0,1"
bitfld.long 0x00 5. "  GMB773 ,Group Modifier Bit 773" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB772 ,Group Modifier Bit 772" "0,1"
bitfld.long 0x00 3. "  GMB771 ,Group Modifier Bit 771" "0,1"
bitfld.long 0x00 2. "  GMB770 ,Group Modifier Bit 770" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB769 ,Group Modifier Bit 769" "0,1"
bitfld.long 0x00 0. "  GMB768 ,Group Modifier Bit 768" "0,1"
else
hgroup.long 0x0D60++0x03
hide.long 0x0 "GICD_IGRPMODR24,Interrupt Group Modifier Register 24"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D64))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19))
group.long 0x0D64++0x03
line.long 0x0 "GICD_IGRPMODR25,Interrupt Group Modifier Register 25"
bitfld.long 0x00 31. " GMB831 ,Group Modifier Bit 831" "0,1"
bitfld.long 0x00 30. "  GMB830 ,Group Modifier Bit 830" "0,1"
bitfld.long 0x00 29. "  GMB829 ,Group Modifier Bit 829" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB828 ,Group Modifier Bit 828" "0,1"
bitfld.long 0x00 27. "  GMB827 ,Group Modifier Bit 827" "0,1"
bitfld.long 0x00 26. "  GMB826 ,Group Modifier Bit 826" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB825 ,Group Modifier Bit 825" "0,1"
bitfld.long 0x00 24. "  GMB824 ,Group Modifier Bit 824" "0,1"
bitfld.long 0x00 23. "  GMB823 ,Group Modifier Bit 823" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB822 ,Group Modifier Bit 822" "0,1"
bitfld.long 0x00 21. "  GMB821 ,Group Modifier Bit 821" "0,1"
bitfld.long 0x00 20. "  GMB820 ,Group Modifier Bit 820" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB819 ,Group Modifier Bit 819" "0,1"
bitfld.long 0x00 18. "  GMB818 ,Group Modifier Bit 818" "0,1"
bitfld.long 0x00 17. "  GMB817 ,Group Modifier Bit 817" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB816 ,Group Modifier Bit 816" "0,1"
bitfld.long 0x00 15. "  GMB815 ,Group Modifier Bit 815" "0,1"
bitfld.long 0x00 14. "  GMB814 ,Group Modifier Bit 814" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB813 ,Group Modifier Bit 813" "0,1"
bitfld.long 0x00 12. "  GMB812 ,Group Modifier Bit 812" "0,1"
bitfld.long 0x00 11. "  GMB811 ,Group Modifier Bit 811" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB810 ,Group Modifier Bit 810" "0,1"
bitfld.long 0x00 9. "  GMB809 ,Group Modifier Bit 809" "0,1"
bitfld.long 0x00 8. "  GMB808 ,Group Modifier Bit 808" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB807 ,Group Modifier Bit 807" "0,1"
bitfld.long 0x00 6. "  GMB806 ,Group Modifier Bit 806" "0,1"
bitfld.long 0x00 5. "  GMB805 ,Group Modifier Bit 805" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB804 ,Group Modifier Bit 804" "0,1"
bitfld.long 0x00 3. "  GMB803 ,Group Modifier Bit 803" "0,1"
bitfld.long 0x00 2. "  GMB802 ,Group Modifier Bit 802" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB801 ,Group Modifier Bit 801" "0,1"
bitfld.long 0x00 0. "  GMB800 ,Group Modifier Bit 800" "0,1"
else
hgroup.long 0x0D64++0x03
hide.long 0x0 "GICD_IGRPMODR25,Interrupt Group Modifier Register 25"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D68))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01A))
group.long 0x0D68++0x03
line.long 0x0 "GICD_IGRPMODR26,Interrupt Group Modifier Register 26"
bitfld.long 0x00 31. " GMB863 ,Group Modifier Bit 863" "0,1"
bitfld.long 0x00 30. "  GMB862 ,Group Modifier Bit 862" "0,1"
bitfld.long 0x00 29. "  GMB861 ,Group Modifier Bit 861" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB860 ,Group Modifier Bit 860" "0,1"
bitfld.long 0x00 27. "  GMB859 ,Group Modifier Bit 859" "0,1"
bitfld.long 0x00 26. "  GMB858 ,Group Modifier Bit 858" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB857 ,Group Modifier Bit 857" "0,1"
bitfld.long 0x00 24. "  GMB856 ,Group Modifier Bit 856" "0,1"
bitfld.long 0x00 23. "  GMB855 ,Group Modifier Bit 855" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB854 ,Group Modifier Bit 854" "0,1"
bitfld.long 0x00 21. "  GMB853 ,Group Modifier Bit 853" "0,1"
bitfld.long 0x00 20. "  GMB852 ,Group Modifier Bit 852" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB851 ,Group Modifier Bit 851" "0,1"
bitfld.long 0x00 18. "  GMB850 ,Group Modifier Bit 850" "0,1"
bitfld.long 0x00 17. "  GMB849 ,Group Modifier Bit 849" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB848 ,Group Modifier Bit 848" "0,1"
bitfld.long 0x00 15. "  GMB847 ,Group Modifier Bit 847" "0,1"
bitfld.long 0x00 14. "  GMB846 ,Group Modifier Bit 846" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB845 ,Group Modifier Bit 845" "0,1"
bitfld.long 0x00 12. "  GMB844 ,Group Modifier Bit 844" "0,1"
bitfld.long 0x00 11. "  GMB843 ,Group Modifier Bit 843" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB842 ,Group Modifier Bit 842" "0,1"
bitfld.long 0x00 9. "  GMB841 ,Group Modifier Bit 841" "0,1"
bitfld.long 0x00 8. "  GMB840 ,Group Modifier Bit 840" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB839 ,Group Modifier Bit 839" "0,1"
bitfld.long 0x00 6. "  GMB838 ,Group Modifier Bit 838" "0,1"
bitfld.long 0x00 5. "  GMB837 ,Group Modifier Bit 837" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB836 ,Group Modifier Bit 836" "0,1"
bitfld.long 0x00 3. "  GMB835 ,Group Modifier Bit 835" "0,1"
bitfld.long 0x00 2. "  GMB834 ,Group Modifier Bit 834" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB833 ,Group Modifier Bit 833" "0,1"
bitfld.long 0x00 0. "  GMB832 ,Group Modifier Bit 832" "0,1"
else
hgroup.long 0x0D68++0x03
hide.long 0x0 "GICD_IGRPMODR26,Interrupt Group Modifier Register 26"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D6C))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B))
group.long 0x0D6C++0x03
line.long 0x0 "GICD_IGRPMODR27,Interrupt Group Modifier Register 27"
bitfld.long 0x00 31. " GMB895 ,Group Modifier Bit 895" "0,1"
bitfld.long 0x00 30. "  GMB894 ,Group Modifier Bit 894" "0,1"
bitfld.long 0x00 29. "  GMB893 ,Group Modifier Bit 893" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB892 ,Group Modifier Bit 892" "0,1"
bitfld.long 0x00 27. "  GMB891 ,Group Modifier Bit 891" "0,1"
bitfld.long 0x00 26. "  GMB890 ,Group Modifier Bit 890" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB889 ,Group Modifier Bit 889" "0,1"
bitfld.long 0x00 24. "  GMB888 ,Group Modifier Bit 888" "0,1"
bitfld.long 0x00 23. "  GMB887 ,Group Modifier Bit 887" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB886 ,Group Modifier Bit 886" "0,1"
bitfld.long 0x00 21. "  GMB885 ,Group Modifier Bit 885" "0,1"
bitfld.long 0x00 20. "  GMB884 ,Group Modifier Bit 884" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB883 ,Group Modifier Bit 883" "0,1"
bitfld.long 0x00 18. "  GMB882 ,Group Modifier Bit 882" "0,1"
bitfld.long 0x00 17. "  GMB881 ,Group Modifier Bit 881" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB880 ,Group Modifier Bit 880" "0,1"
bitfld.long 0x00 15. "  GMB879 ,Group Modifier Bit 879" "0,1"
bitfld.long 0x00 14. "  GMB878 ,Group Modifier Bit 878" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB877 ,Group Modifier Bit 877" "0,1"
bitfld.long 0x00 12. "  GMB876 ,Group Modifier Bit 876" "0,1"
bitfld.long 0x00 11. "  GMB875 ,Group Modifier Bit 875" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB874 ,Group Modifier Bit 874" "0,1"
bitfld.long 0x00 9. "  GMB873 ,Group Modifier Bit 873" "0,1"
bitfld.long 0x00 8. "  GMB872 ,Group Modifier Bit 872" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB871 ,Group Modifier Bit 871" "0,1"
bitfld.long 0x00 6. "  GMB870 ,Group Modifier Bit 870" "0,1"
bitfld.long 0x00 5. "  GMB869 ,Group Modifier Bit 869" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB868 ,Group Modifier Bit 868" "0,1"
bitfld.long 0x00 3. "  GMB867 ,Group Modifier Bit 867" "0,1"
bitfld.long 0x00 2. "  GMB866 ,Group Modifier Bit 866" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB865 ,Group Modifier Bit 865" "0,1"
bitfld.long 0x00 0. "  GMB864 ,Group Modifier Bit 864" "0,1"
else
hgroup.long 0x0D6C++0x03
hide.long 0x0 "GICD_IGRPMODR27,Interrupt Group Modifier Register 27"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D70))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C))
group.long 0x0D70++0x03
line.long 0x0 "GICD_IGRPMODR28,Interrupt Group Modifier Register 28"
bitfld.long 0x00 31. " GMB927 ,Group Modifier Bit 927" "0,1"
bitfld.long 0x00 30. "  GMB926 ,Group Modifier Bit 926" "0,1"
bitfld.long 0x00 29. "  GMB925 ,Group Modifier Bit 925" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB924 ,Group Modifier Bit 924" "0,1"
bitfld.long 0x00 27. "  GMB923 ,Group Modifier Bit 923" "0,1"
bitfld.long 0x00 26. "  GMB922 ,Group Modifier Bit 922" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB921 ,Group Modifier Bit 921" "0,1"
bitfld.long 0x00 24. "  GMB920 ,Group Modifier Bit 920" "0,1"
bitfld.long 0x00 23. "  GMB919 ,Group Modifier Bit 919" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB918 ,Group Modifier Bit 918" "0,1"
bitfld.long 0x00 21. "  GMB917 ,Group Modifier Bit 917" "0,1"
bitfld.long 0x00 20. "  GMB916 ,Group Modifier Bit 916" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB915 ,Group Modifier Bit 915" "0,1"
bitfld.long 0x00 18. "  GMB914 ,Group Modifier Bit 914" "0,1"
bitfld.long 0x00 17. "  GMB913 ,Group Modifier Bit 913" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB912 ,Group Modifier Bit 912" "0,1"
bitfld.long 0x00 15. "  GMB911 ,Group Modifier Bit 911" "0,1"
bitfld.long 0x00 14. "  GMB910 ,Group Modifier Bit 910" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB909 ,Group Modifier Bit 909" "0,1"
bitfld.long 0x00 12. "  GMB908 ,Group Modifier Bit 908" "0,1"
bitfld.long 0x00 11. "  GMB907 ,Group Modifier Bit 907" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB906 ,Group Modifier Bit 906" "0,1"
bitfld.long 0x00 9. "  GMB905 ,Group Modifier Bit 905" "0,1"
bitfld.long 0x00 8. "  GMB904 ,Group Modifier Bit 904" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB903 ,Group Modifier Bit 903" "0,1"
bitfld.long 0x00 6. "  GMB902 ,Group Modifier Bit 902" "0,1"
bitfld.long 0x00 5. "  GMB901 ,Group Modifier Bit 901" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB900 ,Group Modifier Bit 900" "0,1"
bitfld.long 0x00 3. "  GMB899 ,Group Modifier Bit 899" "0,1"
bitfld.long 0x00 2. "  GMB898 ,Group Modifier Bit 898" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB897 ,Group Modifier Bit 897" "0,1"
bitfld.long 0x00 0. "  GMB896 ,Group Modifier Bit 896" "0,1"
else
hgroup.long 0x0D70++0x03
hide.long 0x0 "GICD_IGRPMODR28,Interrupt Group Modifier Register 28"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D74))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D))
group.long 0x0D74++0x03
line.long 0x0 "GICD_IGRPMODR29,Interrupt Group Modifier Register 29"
bitfld.long 0x00 31. " GMB959 ,Group Modifier Bit 959" "0,1"
bitfld.long 0x00 30. "  GMB958 ,Group Modifier Bit 958" "0,1"
bitfld.long 0x00 29. "  GMB957 ,Group Modifier Bit 957" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB956 ,Group Modifier Bit 956" "0,1"
bitfld.long 0x00 27. "  GMB955 ,Group Modifier Bit 955" "0,1"
bitfld.long 0x00 26. "  GMB954 ,Group Modifier Bit 954" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB953 ,Group Modifier Bit 953" "0,1"
bitfld.long 0x00 24. "  GMB952 ,Group Modifier Bit 952" "0,1"
bitfld.long 0x00 23. "  GMB951 ,Group Modifier Bit 951" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB950 ,Group Modifier Bit 950" "0,1"
bitfld.long 0x00 21. "  GMB949 ,Group Modifier Bit 949" "0,1"
bitfld.long 0x00 20. "  GMB948 ,Group Modifier Bit 948" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB947 ,Group Modifier Bit 947" "0,1"
bitfld.long 0x00 18. "  GMB946 ,Group Modifier Bit 946" "0,1"
bitfld.long 0x00 17. "  GMB945 ,Group Modifier Bit 945" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB944 ,Group Modifier Bit 944" "0,1"
bitfld.long 0x00 15. "  GMB943 ,Group Modifier Bit 943" "0,1"
bitfld.long 0x00 14. "  GMB942 ,Group Modifier Bit 942" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB941 ,Group Modifier Bit 941" "0,1"
bitfld.long 0x00 12. "  GMB940 ,Group Modifier Bit 940" "0,1"
bitfld.long 0x00 11. "  GMB939 ,Group Modifier Bit 939" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB938 ,Group Modifier Bit 938" "0,1"
bitfld.long 0x00 9. "  GMB937 ,Group Modifier Bit 937" "0,1"
bitfld.long 0x00 8. "  GMB936 ,Group Modifier Bit 936" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB935 ,Group Modifier Bit 935" "0,1"
bitfld.long 0x00 6. "  GMB934 ,Group Modifier Bit 934" "0,1"
bitfld.long 0x00 5. "  GMB933 ,Group Modifier Bit 933" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB932 ,Group Modifier Bit 932" "0,1"
bitfld.long 0x00 3. "  GMB931 ,Group Modifier Bit 931" "0,1"
bitfld.long 0x00 2. "  GMB930 ,Group Modifier Bit 930" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB929 ,Group Modifier Bit 929" "0,1"
bitfld.long 0x00 0. "  GMB928 ,Group Modifier Bit 928" "0,1"
else
hgroup.long 0x0D74++0x03
hide.long 0x0 "GICD_IGRPMODR29,Interrupt Group Modifier Register 29"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0x0D78))&&(((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E))
group.long 0x0D78++0x03
line.long 0x0 "GICD_IGRPMODR30,Interrupt Group Modifier Register 30"
bitfld.long 0x00 31. " GMB991 ,Group Modifier Bit 991" "0,1"
bitfld.long 0x00 30. "  GMB990 ,Group Modifier Bit 990" "0,1"
bitfld.long 0x00 29. "  GMB989 ,Group Modifier Bit 989" "0,1"
textline "                          "
bitfld.long 0x00 28. " GMB988 ,Group Modifier Bit 988" "0,1"
bitfld.long 0x00 27. "  GMB987 ,Group Modifier Bit 987" "0,1"
bitfld.long 0x00 26. "  GMB986 ,Group Modifier Bit 986" "0,1"
textline "                          "
bitfld.long 0x00 25. " GMB985 ,Group Modifier Bit 985" "0,1"
bitfld.long 0x00 24. "  GMB984 ,Group Modifier Bit 984" "0,1"
bitfld.long 0x00 23. "  GMB983 ,Group Modifier Bit 983" "0,1"
textline "                          "
bitfld.long 0x00 22. " GMB982 ,Group Modifier Bit 982" "0,1"
bitfld.long 0x00 21. "  GMB981 ,Group Modifier Bit 981" "0,1"
bitfld.long 0x00 20. "  GMB980 ,Group Modifier Bit 980" "0,1"
textline "                          "
bitfld.long 0x00 19. " GMB979 ,Group Modifier Bit 979" "0,1"
bitfld.long 0x00 18. "  GMB978 ,Group Modifier Bit 978" "0,1"
bitfld.long 0x00 17. "  GMB977 ,Group Modifier Bit 977" "0,1"
textline "                          "
bitfld.long 0x00 16. " GMB976 ,Group Modifier Bit 976" "0,1"
bitfld.long 0x00 15. "  GMB975 ,Group Modifier Bit 975" "0,1"
bitfld.long 0x00 14. "  GMB974 ,Group Modifier Bit 974" "0,1"
textline "                          "
bitfld.long 0x00 13. " GMB973 ,Group Modifier Bit 973" "0,1"
bitfld.long 0x00 12. "  GMB972 ,Group Modifier Bit 972" "0,1"
bitfld.long 0x00 11. "  GMB971 ,Group Modifier Bit 971" "0,1"
textline "                          "
bitfld.long 0x00 10. " GMB970 ,Group Modifier Bit 970" "0,1"
bitfld.long 0x00 9. "  GMB969 ,Group Modifier Bit 969" "0,1"
bitfld.long 0x00 8. "  GMB968 ,Group Modifier Bit 968" "0,1"
textline "                          "
bitfld.long 0x00 7. " GMB967 ,Group Modifier Bit 967" "0,1"
bitfld.long 0x00 6. "  GMB966 ,Group Modifier Bit 966" "0,1"
bitfld.long 0x00 5. "  GMB965 ,Group Modifier Bit 965" "0,1"
textline "                          "
bitfld.long 0x00 4. " GMB964 ,Group Modifier Bit 964" "0,1"
bitfld.long 0x00 3. "  GMB963 ,Group Modifier Bit 963" "0,1"
bitfld.long 0x00 2. "  GMB962 ,Group Modifier Bit 962" "0,1"
textline "                          "
bitfld.long 0x00 1. " GMB961 ,Group Modifier Bit 961" "0,1"
bitfld.long 0x00 0. "  GMB960 ,Group Modifier Bit 960" "0,1"
else
hgroup.long 0x0D78++0x03
hide.long 0x0 "GICD_IGRPMODR30,Interrupt Group Modifier Register 30"
endif
tree.end
width 14.
tree "Non-secure Access Control Registers"
hgroup.long 0x0E00++0x03
hide.long 0x00 "GICD_NSACR0,Non-secure Access Control Register 0"
hgroup.long 0xE04++0x03
hide.long 0x00 "GICD_NSACR1,Non-secure Access Control Register 1"
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE08)))
group.long 0xE08++0x03
line.long 0x00 "GICD_NSACR2,Non-secure Access Control Register 2"
bitfld.long 0x00 30.--31. " NS_ACCESS47  ,Controls Non-secure access of the interrupt with ID47 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS46  ,Controls Non-secure access of the interrupt with ID46 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS45  ,Controls Non-secure access of the interrupt with ID45 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS44  ,Controls Non-secure access of the interrupt with ID44 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS43  ,Controls Non-secure access of the interrupt with ID43 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS42  ,Controls Non-secure access of the interrupt with ID42 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS41  ,Controls Non-secure access of the interrupt with ID41 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS40  ,Controls Non-secure access of the interrupt with ID40 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS39  ,Controls Non-secure access of the interrupt with ID39 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS38  ,Controls Non-secure access of the interrupt with ID38 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS37  ,Controls Non-secure access of the interrupt with ID37 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS36  ,Controls Non-secure access of the interrupt with ID36 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS35  ,Controls Non-secure access of the interrupt with ID35 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS34  ,Controls Non-secure access of the interrupt with ID34 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS33  ,Controls Non-secure access of the interrupt with ID33 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS32  ,Controls Non-secure access of the interrupt with ID32 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE08++0x03
hide.long 0x00 "GICD_NSACR2,Non-secure Access Control Register 2"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE0C)))
group.long 0xE0C++0x03
line.long 0x00 "GICD_NSACR3,Non-secure Access Control Register 3"
bitfld.long 0x00 30.--31. " NS_ACCESS63  ,Controls Non-secure access of the interrupt with ID63 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS62  ,Controls Non-secure access of the interrupt with ID62 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS61  ,Controls Non-secure access of the interrupt with ID61 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS60  ,Controls Non-secure access of the interrupt with ID60 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS59  ,Controls Non-secure access of the interrupt with ID59 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS58  ,Controls Non-secure access of the interrupt with ID58 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS57  ,Controls Non-secure access of the interrupt with ID57 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS56  ,Controls Non-secure access of the interrupt with ID56 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS55  ,Controls Non-secure access of the interrupt with ID55 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS54  ,Controls Non-secure access of the interrupt with ID54 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS53  ,Controls Non-secure access of the interrupt with ID53 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS52  ,Controls Non-secure access of the interrupt with ID52 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS51  ,Controls Non-secure access of the interrupt with ID51 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS50  ,Controls Non-secure access of the interrupt with ID50 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS49  ,Controls Non-secure access of the interrupt with ID49 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS48  ,Controls Non-secure access of the interrupt with ID48 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE0C++0x03
hide.long 0x00 "GICD_NSACR3,Non-secure Access Control Register 3"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE10)))
group.long 0xE10++0x03
line.long 0x00 "GICD_NSACR4,Non-secure Access Control Register 4"
bitfld.long 0x00 30.--31. " NS_ACCESS79  ,Controls Non-secure access of the interrupt with ID79 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS78  ,Controls Non-secure access of the interrupt with ID78 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS77  ,Controls Non-secure access of the interrupt with ID77 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS76  ,Controls Non-secure access of the interrupt with ID76 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS75  ,Controls Non-secure access of the interrupt with ID75 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS74  ,Controls Non-secure access of the interrupt with ID74 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS73  ,Controls Non-secure access of the interrupt with ID73 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS72  ,Controls Non-secure access of the interrupt with ID72 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS71  ,Controls Non-secure access of the interrupt with ID71 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS70  ,Controls Non-secure access of the interrupt with ID70 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS69  ,Controls Non-secure access of the interrupt with ID69 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS68  ,Controls Non-secure access of the interrupt with ID68 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS67  ,Controls Non-secure access of the interrupt with ID67 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS66  ,Controls Non-secure access of the interrupt with ID66 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS65  ,Controls Non-secure access of the interrupt with ID65 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS64  ,Controls Non-secure access of the interrupt with ID64 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE10++0x03
hide.long 0x00 "GICD_NSACR4,Non-secure Access Control Register 4"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE14)))
group.long 0xE14++0x03
line.long 0x00 "GICD_NSACR5,Non-secure Access Control Register 5"
bitfld.long 0x00 30.--31. " NS_ACCESS95  ,Controls Non-secure access of the interrupt with ID95 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS94  ,Controls Non-secure access of the interrupt with ID94 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS93  ,Controls Non-secure access of the interrupt with ID93 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS92  ,Controls Non-secure access of the interrupt with ID92 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS91  ,Controls Non-secure access of the interrupt with ID91 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS90  ,Controls Non-secure access of the interrupt with ID90 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS89  ,Controls Non-secure access of the interrupt with ID89 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS88  ,Controls Non-secure access of the interrupt with ID88 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS87  ,Controls Non-secure access of the interrupt with ID87 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS86  ,Controls Non-secure access of the interrupt with ID86 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS85  ,Controls Non-secure access of the interrupt with ID85 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS84  ,Controls Non-secure access of the interrupt with ID84 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS83  ,Controls Non-secure access of the interrupt with ID83 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS82  ,Controls Non-secure access of the interrupt with ID82 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS81  ,Controls Non-secure access of the interrupt with ID81 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS80  ,Controls Non-secure access of the interrupt with ID80 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE14++0x03
hide.long 0x00 "GICD_NSACR5,Non-secure Access Control Register 5"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE18)))
group.long 0xE18++0x03
line.long 0x00 "GICD_NSACR6,Non-secure Access Control Register 6"
bitfld.long 0x00 30.--31. " NS_ACCESS111 ,Controls Non-secure access of the interrupt with ID111" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS110 ,Controls Non-secure access of the interrupt with ID110" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS109 ,Controls Non-secure access of the interrupt with ID109" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS108 ,Controls Non-secure access of the interrupt with ID108" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS107 ,Controls Non-secure access of the interrupt with ID107" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS106 ,Controls Non-secure access of the interrupt with ID106" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS105 ,Controls Non-secure access of the interrupt with ID105" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS104 ,Controls Non-secure access of the interrupt with ID104" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS103 ,Controls Non-secure access of the interrupt with ID103" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS102 ,Controls Non-secure access of the interrupt with ID102" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS101 ,Controls Non-secure access of the interrupt with ID101" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS100 ,Controls Non-secure access of the interrupt with ID100" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS99  ,Controls Non-secure access of the interrupt with ID99 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS98  ,Controls Non-secure access of the interrupt with ID98 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS97  ,Controls Non-secure access of the interrupt with ID97 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS96  ,Controls Non-secure access of the interrupt with ID96 " "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE18++0x03
hide.long 0x00 "GICD_NSACR6,Non-secure Access Control Register 6"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE1C)))
group.long 0xE1C++0x03
line.long 0x00 "GICD_NSACR7,Non-secure Access Control Register 7"
bitfld.long 0x00 30.--31. " NS_ACCESS127 ,Controls Non-secure access of the interrupt with ID127" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS126 ,Controls Non-secure access of the interrupt with ID126" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS125 ,Controls Non-secure access of the interrupt with ID125" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS124 ,Controls Non-secure access of the interrupt with ID124" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS123 ,Controls Non-secure access of the interrupt with ID123" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS122 ,Controls Non-secure access of the interrupt with ID122" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS121 ,Controls Non-secure access of the interrupt with ID121" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS120 ,Controls Non-secure access of the interrupt with ID120" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS119 ,Controls Non-secure access of the interrupt with ID119" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS118 ,Controls Non-secure access of the interrupt with ID118" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS117 ,Controls Non-secure access of the interrupt with ID117" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS116 ,Controls Non-secure access of the interrupt with ID116" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS115 ,Controls Non-secure access of the interrupt with ID115" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS114 ,Controls Non-secure access of the interrupt with ID114" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS113 ,Controls Non-secure access of the interrupt with ID113" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS112 ,Controls Non-secure access of the interrupt with ID112" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE1C++0x03
hide.long 0x00 "GICD_NSACR7,Non-secure Access Control Register 7"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE20)))
group.long 0xE20++0x03
line.long 0x00 "GICD_NSACR8,Non-secure Access Control Register 8"
bitfld.long 0x00 30.--31. " NS_ACCESS143 ,Controls Non-secure access of the interrupt with ID143" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS142 ,Controls Non-secure access of the interrupt with ID142" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS141 ,Controls Non-secure access of the interrupt with ID141" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS140 ,Controls Non-secure access of the interrupt with ID140" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS139 ,Controls Non-secure access of the interrupt with ID139" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS138 ,Controls Non-secure access of the interrupt with ID138" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS137 ,Controls Non-secure access of the interrupt with ID137" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS136 ,Controls Non-secure access of the interrupt with ID136" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS135 ,Controls Non-secure access of the interrupt with ID135" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS134 ,Controls Non-secure access of the interrupt with ID134" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS133 ,Controls Non-secure access of the interrupt with ID133" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS132 ,Controls Non-secure access of the interrupt with ID132" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS131 ,Controls Non-secure access of the interrupt with ID131" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS130 ,Controls Non-secure access of the interrupt with ID130" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS129 ,Controls Non-secure access of the interrupt with ID129" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS128 ,Controls Non-secure access of the interrupt with ID128" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE20++0x03
hide.long 0x00 "GICD_NSACR8,Non-secure Access Control Register 8"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE24)))
group.long 0xE24++0x03
line.long 0x00 "GICD_NSACR9,Non-secure Access Control Register 9"
bitfld.long 0x00 30.--31. " NS_ACCESS159 ,Controls Non-secure access of the interrupt with ID159" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS158 ,Controls Non-secure access of the interrupt with ID158" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS157 ,Controls Non-secure access of the interrupt with ID157" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS156 ,Controls Non-secure access of the interrupt with ID156" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS155 ,Controls Non-secure access of the interrupt with ID155" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS154 ,Controls Non-secure access of the interrupt with ID154" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS153 ,Controls Non-secure access of the interrupt with ID153" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS152 ,Controls Non-secure access of the interrupt with ID152" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS151 ,Controls Non-secure access of the interrupt with ID151" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS150 ,Controls Non-secure access of the interrupt with ID150" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS149 ,Controls Non-secure access of the interrupt with ID149" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS148 ,Controls Non-secure access of the interrupt with ID148" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS147 ,Controls Non-secure access of the interrupt with ID147" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS146 ,Controls Non-secure access of the interrupt with ID146" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS145 ,Controls Non-secure access of the interrupt with ID145" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS144 ,Controls Non-secure access of the interrupt with ID144" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE24++0x03
hide.long 0x00 "GICD_NSACR9,Non-secure Access Control Register 9"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE28)))
group.long 0xE28++0x03
line.long 0x00 "GICD_NSACR10,Non-secure Access Control Register 10"
bitfld.long 0x00 30.--31. " NS_ACCESS175 ,Controls Non-secure access of the interrupt with ID175" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS174 ,Controls Non-secure access of the interrupt with ID174" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS173 ,Controls Non-secure access of the interrupt with ID173" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS172 ,Controls Non-secure access of the interrupt with ID172" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS171 ,Controls Non-secure access of the interrupt with ID171" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS170 ,Controls Non-secure access of the interrupt with ID170" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS169 ,Controls Non-secure access of the interrupt with ID169" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS168 ,Controls Non-secure access of the interrupt with ID168" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS167 ,Controls Non-secure access of the interrupt with ID167" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS166 ,Controls Non-secure access of the interrupt with ID166" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS165 ,Controls Non-secure access of the interrupt with ID165" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS164 ,Controls Non-secure access of the interrupt with ID164" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS163 ,Controls Non-secure access of the interrupt with ID163" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS162 ,Controls Non-secure access of the interrupt with ID162" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS161 ,Controls Non-secure access of the interrupt with ID161" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS160 ,Controls Non-secure access of the interrupt with ID160" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE28++0x03
hide.long 0x00 "GICD_NSACR10,Non-secure Access Control Register 10"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE2C)))
group.long 0xE2C++0x03
line.long 0x00 "GICD_NSACR11,Non-secure Access Control Register 11"
bitfld.long 0x00 30.--31. " NS_ACCESS191 ,Controls Non-secure access of the interrupt with ID191" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS190 ,Controls Non-secure access of the interrupt with ID190" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS189 ,Controls Non-secure access of the interrupt with ID189" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS188 ,Controls Non-secure access of the interrupt with ID188" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS187 ,Controls Non-secure access of the interrupt with ID187" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS186 ,Controls Non-secure access of the interrupt with ID186" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS185 ,Controls Non-secure access of the interrupt with ID185" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS184 ,Controls Non-secure access of the interrupt with ID184" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS183 ,Controls Non-secure access of the interrupt with ID183" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS182 ,Controls Non-secure access of the interrupt with ID182" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS181 ,Controls Non-secure access of the interrupt with ID181" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS180 ,Controls Non-secure access of the interrupt with ID180" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS179 ,Controls Non-secure access of the interrupt with ID179" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS178 ,Controls Non-secure access of the interrupt with ID178" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS177 ,Controls Non-secure access of the interrupt with ID177" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS176 ,Controls Non-secure access of the interrupt with ID176" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE2C++0x03
hide.long 0x00 "GICD_NSACR11,Non-secure Access Control Register 11"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE30)))
group.long 0xE30++0x03
line.long 0x00 "GICD_NSACR12,Non-secure Access Control Register 12"
bitfld.long 0x00 30.--31. " NS_ACCESS207 ,Controls Non-secure access of the interrupt with ID207" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS206 ,Controls Non-secure access of the interrupt with ID206" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS205 ,Controls Non-secure access of the interrupt with ID205" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS204 ,Controls Non-secure access of the interrupt with ID204" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS203 ,Controls Non-secure access of the interrupt with ID203" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS202 ,Controls Non-secure access of the interrupt with ID202" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS201 ,Controls Non-secure access of the interrupt with ID201" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS200 ,Controls Non-secure access of the interrupt with ID200" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS199 ,Controls Non-secure access of the interrupt with ID199" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS198 ,Controls Non-secure access of the interrupt with ID198" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS197 ,Controls Non-secure access of the interrupt with ID197" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS196 ,Controls Non-secure access of the interrupt with ID196" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS195 ,Controls Non-secure access of the interrupt with ID195" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS194 ,Controls Non-secure access of the interrupt with ID194" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS193 ,Controls Non-secure access of the interrupt with ID193" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS192 ,Controls Non-secure access of the interrupt with ID192" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE30++0x03
hide.long 0x00 "GICD_NSACR12,Non-secure Access Control Register 12"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE34)))
group.long 0xE34++0x03
line.long 0x00 "GICD_NSACR13,Non-secure Access Control Register 13"
bitfld.long 0x00 30.--31. " NS_ACCESS223 ,Controls Non-secure access of the interrupt with ID223" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS222 ,Controls Non-secure access of the interrupt with ID222" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS221 ,Controls Non-secure access of the interrupt with ID221" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS220 ,Controls Non-secure access of the interrupt with ID220" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS219 ,Controls Non-secure access of the interrupt with ID219" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS218 ,Controls Non-secure access of the interrupt with ID218" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS217 ,Controls Non-secure access of the interrupt with ID217" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS216 ,Controls Non-secure access of the interrupt with ID216" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS215 ,Controls Non-secure access of the interrupt with ID215" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS214 ,Controls Non-secure access of the interrupt with ID214" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS213 ,Controls Non-secure access of the interrupt with ID213" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS212 ,Controls Non-secure access of the interrupt with ID212" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS211 ,Controls Non-secure access of the interrupt with ID211" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS210 ,Controls Non-secure access of the interrupt with ID210" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS209 ,Controls Non-secure access of the interrupt with ID209" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS208 ,Controls Non-secure access of the interrupt with ID208" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE34++0x03
hide.long 0x00 "GICD_NSACR13,Non-secure Access Control Register 13"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE38)))
group.long 0xE38++0x03
line.long 0x00 "GICD_NSACR14,Non-secure Access Control Register 14"
bitfld.long 0x00 30.--31. " NS_ACCESS239 ,Controls Non-secure access of the interrupt with ID239" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS238 ,Controls Non-secure access of the interrupt with ID238" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS237 ,Controls Non-secure access of the interrupt with ID237" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS236 ,Controls Non-secure access of the interrupt with ID236" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS235 ,Controls Non-secure access of the interrupt with ID235" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS234 ,Controls Non-secure access of the interrupt with ID234" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS233 ,Controls Non-secure access of the interrupt with ID233" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS232 ,Controls Non-secure access of the interrupt with ID232" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS231 ,Controls Non-secure access of the interrupt with ID231" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS230 ,Controls Non-secure access of the interrupt with ID230" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS229 ,Controls Non-secure access of the interrupt with ID229" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS228 ,Controls Non-secure access of the interrupt with ID228" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS227 ,Controls Non-secure access of the interrupt with ID227" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS226 ,Controls Non-secure access of the interrupt with ID226" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS225 ,Controls Non-secure access of the interrupt with ID225" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS224 ,Controls Non-secure access of the interrupt with ID224" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE38++0x03
hide.long 0x00 "GICD_NSACR14,Non-secure Access Control Register 14"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE3C)))
group.long 0xE3C++0x03
line.long 0x00 "GICD_NSACR15,Non-secure Access Control Register 15"
bitfld.long 0x00 30.--31. " NS_ACCESS255 ,Controls Non-secure access of the interrupt with ID255" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS254 ,Controls Non-secure access of the interrupt with ID254" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS253 ,Controls Non-secure access of the interrupt with ID253" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS252 ,Controls Non-secure access of the interrupt with ID252" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS251 ,Controls Non-secure access of the interrupt with ID251" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS250 ,Controls Non-secure access of the interrupt with ID250" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS249 ,Controls Non-secure access of the interrupt with ID249" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS248 ,Controls Non-secure access of the interrupt with ID248" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS247 ,Controls Non-secure access of the interrupt with ID247" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS246 ,Controls Non-secure access of the interrupt with ID246" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS245 ,Controls Non-secure access of the interrupt with ID245" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS244 ,Controls Non-secure access of the interrupt with ID244" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS243 ,Controls Non-secure access of the interrupt with ID243" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS242 ,Controls Non-secure access of the interrupt with ID242" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS241 ,Controls Non-secure access of the interrupt with ID241" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS240 ,Controls Non-secure access of the interrupt with ID240" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE3C++0x03
hide.long 0x00 "GICD_NSACR15,Non-secure Access Control Register 15"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE40)))
group.long 0xE40++0x03
line.long 0x00 "GICD_NSACR16,Non-secure Access Control Register 16"
bitfld.long 0x00 30.--31. " NS_ACCESS271 ,Controls Non-secure access of the interrupt with ID271" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS270 ,Controls Non-secure access of the interrupt with ID270" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS269 ,Controls Non-secure access of the interrupt with ID269" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS268 ,Controls Non-secure access of the interrupt with ID268" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS267 ,Controls Non-secure access of the interrupt with ID267" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS266 ,Controls Non-secure access of the interrupt with ID266" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS265 ,Controls Non-secure access of the interrupt with ID265" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS264 ,Controls Non-secure access of the interrupt with ID264" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS263 ,Controls Non-secure access of the interrupt with ID263" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS262 ,Controls Non-secure access of the interrupt with ID262" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS261 ,Controls Non-secure access of the interrupt with ID261" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS260 ,Controls Non-secure access of the interrupt with ID260" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS259 ,Controls Non-secure access of the interrupt with ID259" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS258 ,Controls Non-secure access of the interrupt with ID258" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS257 ,Controls Non-secure access of the interrupt with ID257" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS256 ,Controls Non-secure access of the interrupt with ID256" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE40++0x03
hide.long 0x00 "GICD_NSACR16,Non-secure Access Control Register 16"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE44)))
group.long 0xE44++0x03
line.long 0x00 "GICD_NSACR17,Non-secure Access Control Register 17"
bitfld.long 0x00 30.--31. " NS_ACCESS287 ,Controls Non-secure access of the interrupt with ID287" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS286 ,Controls Non-secure access of the interrupt with ID286" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS285 ,Controls Non-secure access of the interrupt with ID285" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS284 ,Controls Non-secure access of the interrupt with ID284" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS283 ,Controls Non-secure access of the interrupt with ID283" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS282 ,Controls Non-secure access of the interrupt with ID282" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS281 ,Controls Non-secure access of the interrupt with ID281" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS280 ,Controls Non-secure access of the interrupt with ID280" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS279 ,Controls Non-secure access of the interrupt with ID279" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS278 ,Controls Non-secure access of the interrupt with ID278" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS277 ,Controls Non-secure access of the interrupt with ID277" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS276 ,Controls Non-secure access of the interrupt with ID276" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS275 ,Controls Non-secure access of the interrupt with ID275" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS274 ,Controls Non-secure access of the interrupt with ID274" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS273 ,Controls Non-secure access of the interrupt with ID273" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS272 ,Controls Non-secure access of the interrupt with ID272" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE44++0x03
hide.long 0x00 "GICD_NSACR17,Non-secure Access Control Register 17"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE48)))
group.long 0xE48++0x03
line.long 0x00 "GICD_NSACR18,Non-secure Access Control Register 18"
bitfld.long 0x00 30.--31. " NS_ACCESS303 ,Controls Non-secure access of the interrupt with ID303" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS302 ,Controls Non-secure access of the interrupt with ID302" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS301 ,Controls Non-secure access of the interrupt with ID301" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS300 ,Controls Non-secure access of the interrupt with ID300" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS299 ,Controls Non-secure access of the interrupt with ID299" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS298 ,Controls Non-secure access of the interrupt with ID298" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS297 ,Controls Non-secure access of the interrupt with ID297" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS296 ,Controls Non-secure access of the interrupt with ID296" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS295 ,Controls Non-secure access of the interrupt with ID295" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS294 ,Controls Non-secure access of the interrupt with ID294" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS293 ,Controls Non-secure access of the interrupt with ID293" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS292 ,Controls Non-secure access of the interrupt with ID292" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS291 ,Controls Non-secure access of the interrupt with ID291" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS290 ,Controls Non-secure access of the interrupt with ID290" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS289 ,Controls Non-secure access of the interrupt with ID289" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS288 ,Controls Non-secure access of the interrupt with ID288" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE48++0x03
hide.long 0x00 "GICD_NSACR18,Non-secure Access Control Register 18"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE4C)))
group.long 0xE4C++0x03
line.long 0x00 "GICD_NSACR19,Non-secure Access Control Register 19"
bitfld.long 0x00 30.--31. " NS_ACCESS319 ,Controls Non-secure access of the interrupt with ID319" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS318 ,Controls Non-secure access of the interrupt with ID318" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS317 ,Controls Non-secure access of the interrupt with ID317" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS316 ,Controls Non-secure access of the interrupt with ID316" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS315 ,Controls Non-secure access of the interrupt with ID315" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS314 ,Controls Non-secure access of the interrupt with ID314" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS313 ,Controls Non-secure access of the interrupt with ID313" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS312 ,Controls Non-secure access of the interrupt with ID312" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS311 ,Controls Non-secure access of the interrupt with ID311" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS310 ,Controls Non-secure access of the interrupt with ID310" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS309 ,Controls Non-secure access of the interrupt with ID309" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS308 ,Controls Non-secure access of the interrupt with ID308" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS307 ,Controls Non-secure access of the interrupt with ID307" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS306 ,Controls Non-secure access of the interrupt with ID306" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS305 ,Controls Non-secure access of the interrupt with ID305" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS304 ,Controls Non-secure access of the interrupt with ID304" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE4C++0x03
hide.long 0x00 "GICD_NSACR19,Non-secure Access Control Register 19"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE50)))
group.long 0xE50++0x03
line.long 0x00 "GICD_NSACR20,Non-secure Access Control Register 20"
bitfld.long 0x00 30.--31. " NS_ACCESS335 ,Controls Non-secure access of the interrupt with ID335" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS334 ,Controls Non-secure access of the interrupt with ID334" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS333 ,Controls Non-secure access of the interrupt with ID333" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS332 ,Controls Non-secure access of the interrupt with ID332" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS331 ,Controls Non-secure access of the interrupt with ID331" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS330 ,Controls Non-secure access of the interrupt with ID330" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS329 ,Controls Non-secure access of the interrupt with ID329" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS328 ,Controls Non-secure access of the interrupt with ID328" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS327 ,Controls Non-secure access of the interrupt with ID327" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS326 ,Controls Non-secure access of the interrupt with ID326" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS325 ,Controls Non-secure access of the interrupt with ID325" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS324 ,Controls Non-secure access of the interrupt with ID324" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS323 ,Controls Non-secure access of the interrupt with ID323" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS322 ,Controls Non-secure access of the interrupt with ID322" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS321 ,Controls Non-secure access of the interrupt with ID321" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS320 ,Controls Non-secure access of the interrupt with ID320" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE50++0x03
hide.long 0x00 "GICD_NSACR20,Non-secure Access Control Register 20"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE54)))
group.long 0xE54++0x03
line.long 0x00 "GICD_NSACR21,Non-secure Access Control Register 21"
bitfld.long 0x00 30.--31. " NS_ACCESS351 ,Controls Non-secure access of the interrupt with ID351" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS350 ,Controls Non-secure access of the interrupt with ID350" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS349 ,Controls Non-secure access of the interrupt with ID349" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS348 ,Controls Non-secure access of the interrupt with ID348" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS347 ,Controls Non-secure access of the interrupt with ID347" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS346 ,Controls Non-secure access of the interrupt with ID346" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS345 ,Controls Non-secure access of the interrupt with ID345" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS344 ,Controls Non-secure access of the interrupt with ID344" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS343 ,Controls Non-secure access of the interrupt with ID343" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS342 ,Controls Non-secure access of the interrupt with ID342" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS341 ,Controls Non-secure access of the interrupt with ID341" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS340 ,Controls Non-secure access of the interrupt with ID340" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS339 ,Controls Non-secure access of the interrupt with ID339" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS338 ,Controls Non-secure access of the interrupt with ID338" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS337 ,Controls Non-secure access of the interrupt with ID337" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS336 ,Controls Non-secure access of the interrupt with ID336" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE54++0x03
hide.long 0x00 "GICD_NSACR21,Non-secure Access Control Register 21"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE58)))
group.long 0xE58++0x03
line.long 0x00 "GICD_NSACR22,Non-secure Access Control Register 22"
bitfld.long 0x00 30.--31. " NS_ACCESS367 ,Controls Non-secure access of the interrupt with ID367" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS366 ,Controls Non-secure access of the interrupt with ID366" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS365 ,Controls Non-secure access of the interrupt with ID365" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS364 ,Controls Non-secure access of the interrupt with ID364" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS363 ,Controls Non-secure access of the interrupt with ID363" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS362 ,Controls Non-secure access of the interrupt with ID362" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS361 ,Controls Non-secure access of the interrupt with ID361" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS360 ,Controls Non-secure access of the interrupt with ID360" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS359 ,Controls Non-secure access of the interrupt with ID359" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS358 ,Controls Non-secure access of the interrupt with ID358" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS357 ,Controls Non-secure access of the interrupt with ID357" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS356 ,Controls Non-secure access of the interrupt with ID356" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS355 ,Controls Non-secure access of the interrupt with ID355" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS354 ,Controls Non-secure access of the interrupt with ID354" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS353 ,Controls Non-secure access of the interrupt with ID353" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS352 ,Controls Non-secure access of the interrupt with ID352" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE58++0x03
hide.long 0x00 "GICD_NSACR22,Non-secure Access Control Register 22"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE5C)))
group.long 0xE5C++0x03
line.long 0x00 "GICD_NSACR23,Non-secure Access Control Register 23"
bitfld.long 0x00 30.--31. " NS_ACCESS383 ,Controls Non-secure access of the interrupt with ID383" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS382 ,Controls Non-secure access of the interrupt with ID382" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS381 ,Controls Non-secure access of the interrupt with ID381" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS380 ,Controls Non-secure access of the interrupt with ID380" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS379 ,Controls Non-secure access of the interrupt with ID379" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS378 ,Controls Non-secure access of the interrupt with ID378" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS377 ,Controls Non-secure access of the interrupt with ID377" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS376 ,Controls Non-secure access of the interrupt with ID376" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS375 ,Controls Non-secure access of the interrupt with ID375" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS374 ,Controls Non-secure access of the interrupt with ID374" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS373 ,Controls Non-secure access of the interrupt with ID373" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS372 ,Controls Non-secure access of the interrupt with ID372" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS371 ,Controls Non-secure access of the interrupt with ID371" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS370 ,Controls Non-secure access of the interrupt with ID370" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS369 ,Controls Non-secure access of the interrupt with ID369" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS368 ,Controls Non-secure access of the interrupt with ID368" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE5C++0x03
hide.long 0x00 "GICD_NSACR23,Non-secure Access Control Register 23"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE60)))
group.long 0xE60++0x03
line.long 0x00 "GICD_NSACR24,Non-secure Access Control Register 24"
bitfld.long 0x00 30.--31. " NS_ACCESS399 ,Controls Non-secure access of the interrupt with ID399" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS398 ,Controls Non-secure access of the interrupt with ID398" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS397 ,Controls Non-secure access of the interrupt with ID397" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS396 ,Controls Non-secure access of the interrupt with ID396" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS395 ,Controls Non-secure access of the interrupt with ID395" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS394 ,Controls Non-secure access of the interrupt with ID394" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS393 ,Controls Non-secure access of the interrupt with ID393" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS392 ,Controls Non-secure access of the interrupt with ID392" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS391 ,Controls Non-secure access of the interrupt with ID391" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS390 ,Controls Non-secure access of the interrupt with ID390" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS389 ,Controls Non-secure access of the interrupt with ID389" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS388 ,Controls Non-secure access of the interrupt with ID388" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS387 ,Controls Non-secure access of the interrupt with ID387" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS386 ,Controls Non-secure access of the interrupt with ID386" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS385 ,Controls Non-secure access of the interrupt with ID385" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS384 ,Controls Non-secure access of the interrupt with ID384" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE60++0x03
hide.long 0x00 "GICD_NSACR24,Non-secure Access Control Register 24"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE64)))
group.long 0xE64++0x03
line.long 0x00 "GICD_NSACR25,Non-secure Access Control Register 25"
bitfld.long 0x00 30.--31. " NS_ACCESS415 ,Controls Non-secure access of the interrupt with ID415" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS414 ,Controls Non-secure access of the interrupt with ID414" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS413 ,Controls Non-secure access of the interrupt with ID413" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS412 ,Controls Non-secure access of the interrupt with ID412" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS411 ,Controls Non-secure access of the interrupt with ID411" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS410 ,Controls Non-secure access of the interrupt with ID410" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS409 ,Controls Non-secure access of the interrupt with ID409" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS408 ,Controls Non-secure access of the interrupt with ID408" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS407 ,Controls Non-secure access of the interrupt with ID407" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS406 ,Controls Non-secure access of the interrupt with ID406" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS405 ,Controls Non-secure access of the interrupt with ID405" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS404 ,Controls Non-secure access of the interrupt with ID404" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS403 ,Controls Non-secure access of the interrupt with ID403" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS402 ,Controls Non-secure access of the interrupt with ID402" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS401 ,Controls Non-secure access of the interrupt with ID401" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS400 ,Controls Non-secure access of the interrupt with ID400" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE64++0x03
hide.long 0x00 "GICD_NSACR25,Non-secure Access Control Register 25"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE68)))
group.long 0xE68++0x03
line.long 0x00 "GICD_NSACR26,Non-secure Access Control Register 26"
bitfld.long 0x00 30.--31. " NS_ACCESS431 ,Controls Non-secure access of the interrupt with ID431" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS430 ,Controls Non-secure access of the interrupt with ID430" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS429 ,Controls Non-secure access of the interrupt with ID429" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS428 ,Controls Non-secure access of the interrupt with ID428" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS427 ,Controls Non-secure access of the interrupt with ID427" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS426 ,Controls Non-secure access of the interrupt with ID426" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS425 ,Controls Non-secure access of the interrupt with ID425" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS424 ,Controls Non-secure access of the interrupt with ID424" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS423 ,Controls Non-secure access of the interrupt with ID423" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS422 ,Controls Non-secure access of the interrupt with ID422" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS421 ,Controls Non-secure access of the interrupt with ID421" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS420 ,Controls Non-secure access of the interrupt with ID420" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS419 ,Controls Non-secure access of the interrupt with ID419" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS418 ,Controls Non-secure access of the interrupt with ID418" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS417 ,Controls Non-secure access of the interrupt with ID417" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS416 ,Controls Non-secure access of the interrupt with ID416" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE68++0x03
hide.long 0x00 "GICD_NSACR26,Non-secure Access Control Register 26"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE6C)))
group.long 0xE6C++0x03
line.long 0x00 "GICD_NSACR27,Non-secure Access Control Register 27"
bitfld.long 0x00 30.--31. " NS_ACCESS447 ,Controls Non-secure access of the interrupt with ID447" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS446 ,Controls Non-secure access of the interrupt with ID446" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS445 ,Controls Non-secure access of the interrupt with ID445" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS444 ,Controls Non-secure access of the interrupt with ID444" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS443 ,Controls Non-secure access of the interrupt with ID443" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS442 ,Controls Non-secure access of the interrupt with ID442" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS441 ,Controls Non-secure access of the interrupt with ID441" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS440 ,Controls Non-secure access of the interrupt with ID440" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS439 ,Controls Non-secure access of the interrupt with ID439" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS438 ,Controls Non-secure access of the interrupt with ID438" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS437 ,Controls Non-secure access of the interrupt with ID437" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS436 ,Controls Non-secure access of the interrupt with ID436" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS435 ,Controls Non-secure access of the interrupt with ID435" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS434 ,Controls Non-secure access of the interrupt with ID434" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS433 ,Controls Non-secure access of the interrupt with ID433" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS432 ,Controls Non-secure access of the interrupt with ID432" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE6C++0x03
hide.long 0x00 "GICD_NSACR27,Non-secure Access Control Register 27"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE70)))
group.long 0xE70++0x03
line.long 0x00 "GICD_NSACR28,Non-secure Access Control Register 28"
bitfld.long 0x00 30.--31. " NS_ACCESS463 ,Controls Non-secure access of the interrupt with ID463" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS462 ,Controls Non-secure access of the interrupt with ID462" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS461 ,Controls Non-secure access of the interrupt with ID461" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS460 ,Controls Non-secure access of the interrupt with ID460" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS459 ,Controls Non-secure access of the interrupt with ID459" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS458 ,Controls Non-secure access of the interrupt with ID458" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS457 ,Controls Non-secure access of the interrupt with ID457" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS456 ,Controls Non-secure access of the interrupt with ID456" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS455 ,Controls Non-secure access of the interrupt with ID455" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS454 ,Controls Non-secure access of the interrupt with ID454" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS453 ,Controls Non-secure access of the interrupt with ID453" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS452 ,Controls Non-secure access of the interrupt with ID452" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS451 ,Controls Non-secure access of the interrupt with ID451" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS450 ,Controls Non-secure access of the interrupt with ID450" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS449 ,Controls Non-secure access of the interrupt with ID449" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS448 ,Controls Non-secure access of the interrupt with ID448" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE70++0x03
hide.long 0x00 "GICD_NSACR28,Non-secure Access Control Register 28"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE74)))
group.long 0xE74++0x03
line.long 0x00 "GICD_NSACR29,Non-secure Access Control Register 29"
bitfld.long 0x00 30.--31. " NS_ACCESS479 ,Controls Non-secure access of the interrupt with ID479" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS478 ,Controls Non-secure access of the interrupt with ID478" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS477 ,Controls Non-secure access of the interrupt with ID477" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS476 ,Controls Non-secure access of the interrupt with ID476" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS475 ,Controls Non-secure access of the interrupt with ID475" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS474 ,Controls Non-secure access of the interrupt with ID474" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS473 ,Controls Non-secure access of the interrupt with ID473" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS472 ,Controls Non-secure access of the interrupt with ID472" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS471 ,Controls Non-secure access of the interrupt with ID471" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS470 ,Controls Non-secure access of the interrupt with ID470" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS469 ,Controls Non-secure access of the interrupt with ID469" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS468 ,Controls Non-secure access of the interrupt with ID468" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS467 ,Controls Non-secure access of the interrupt with ID467" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS466 ,Controls Non-secure access of the interrupt with ID466" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS465 ,Controls Non-secure access of the interrupt with ID465" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS464 ,Controls Non-secure access of the interrupt with ID464" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE74++0x03
hide.long 0x00 "GICD_NSACR29,Non-secure Access Control Register 29"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE78)))
group.long 0xE78++0x03
line.long 0x00 "GICD_NSACR30,Non-secure Access Control Register 30"
bitfld.long 0x00 30.--31. " NS_ACCESS495 ,Controls Non-secure access of the interrupt with ID495" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS494 ,Controls Non-secure access of the interrupt with ID494" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS493 ,Controls Non-secure access of the interrupt with ID493" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS492 ,Controls Non-secure access of the interrupt with ID492" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS491 ,Controls Non-secure access of the interrupt with ID491" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS490 ,Controls Non-secure access of the interrupt with ID490" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS489 ,Controls Non-secure access of the interrupt with ID489" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS488 ,Controls Non-secure access of the interrupt with ID488" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS487 ,Controls Non-secure access of the interrupt with ID487" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS486 ,Controls Non-secure access of the interrupt with ID486" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS485 ,Controls Non-secure access of the interrupt with ID485" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS484 ,Controls Non-secure access of the interrupt with ID484" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS483 ,Controls Non-secure access of the interrupt with ID483" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS482 ,Controls Non-secure access of the interrupt with ID482" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS481 ,Controls Non-secure access of the interrupt with ID481" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS480 ,Controls Non-secure access of the interrupt with ID480" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE78++0x03
hide.long 0x00 "GICD_NSACR30,Non-secure Access Control Register 30"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE7C)))
group.long 0xE7C++0x03
line.long 0x00 "GICD_NSACR31,Non-secure Access Control Register 31"
bitfld.long 0x00 30.--31. " NS_ACCESS511 ,Controls Non-secure access of the interrupt with ID511" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS510 ,Controls Non-secure access of the interrupt with ID510" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS509 ,Controls Non-secure access of the interrupt with ID509" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS508 ,Controls Non-secure access of the interrupt with ID508" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS507 ,Controls Non-secure access of the interrupt with ID507" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS506 ,Controls Non-secure access of the interrupt with ID506" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS505 ,Controls Non-secure access of the interrupt with ID505" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS504 ,Controls Non-secure access of the interrupt with ID504" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS503 ,Controls Non-secure access of the interrupt with ID503" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS502 ,Controls Non-secure access of the interrupt with ID502" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS501 ,Controls Non-secure access of the interrupt with ID501" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS500 ,Controls Non-secure access of the interrupt with ID500" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS499 ,Controls Non-secure access of the interrupt with ID499" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS498 ,Controls Non-secure access of the interrupt with ID498" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS497 ,Controls Non-secure access of the interrupt with ID497" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS496 ,Controls Non-secure access of the interrupt with ID496" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE7C++0x03
hide.long 0x00 "GICD_NSACR31,Non-secure Access Control Register 31"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE80)))
group.long 0xE80++0x03
line.long 0x00 "GICD_NSACR32,Non-secure Access Control Register 32"
bitfld.long 0x00 30.--31. " NS_ACCESS527 ,Controls Non-secure access of the interrupt with ID527" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS526 ,Controls Non-secure access of the interrupt with ID526" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS525 ,Controls Non-secure access of the interrupt with ID525" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS524 ,Controls Non-secure access of the interrupt with ID524" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS523 ,Controls Non-secure access of the interrupt with ID523" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS522 ,Controls Non-secure access of the interrupt with ID522" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS521 ,Controls Non-secure access of the interrupt with ID521" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS520 ,Controls Non-secure access of the interrupt with ID520" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS519 ,Controls Non-secure access of the interrupt with ID519" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS518 ,Controls Non-secure access of the interrupt with ID518" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS517 ,Controls Non-secure access of the interrupt with ID517" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS516 ,Controls Non-secure access of the interrupt with ID516" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS515 ,Controls Non-secure access of the interrupt with ID515" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS514 ,Controls Non-secure access of the interrupt with ID514" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS513 ,Controls Non-secure access of the interrupt with ID513" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS512 ,Controls Non-secure access of the interrupt with ID512" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE80++0x03
hide.long 0x00 "GICD_NSACR32,Non-secure Access Control Register 32"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE84)))
group.long 0xE84++0x03
line.long 0x00 "GICD_NSACR33,Non-secure Access Control Register 33"
bitfld.long 0x00 30.--31. " NS_ACCESS543 ,Controls Non-secure access of the interrupt with ID543" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS542 ,Controls Non-secure access of the interrupt with ID542" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS541 ,Controls Non-secure access of the interrupt with ID541" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS540 ,Controls Non-secure access of the interrupt with ID540" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS539 ,Controls Non-secure access of the interrupt with ID539" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS538 ,Controls Non-secure access of the interrupt with ID538" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS537 ,Controls Non-secure access of the interrupt with ID537" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS536 ,Controls Non-secure access of the interrupt with ID536" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS535 ,Controls Non-secure access of the interrupt with ID535" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS534 ,Controls Non-secure access of the interrupt with ID534" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS533 ,Controls Non-secure access of the interrupt with ID533" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS532 ,Controls Non-secure access of the interrupt with ID532" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS531 ,Controls Non-secure access of the interrupt with ID531" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS530 ,Controls Non-secure access of the interrupt with ID530" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS529 ,Controls Non-secure access of the interrupt with ID529" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS528 ,Controls Non-secure access of the interrupt with ID528" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE84++0x03
hide.long 0x00 "GICD_NSACR33,Non-secure Access Control Register 33"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE88)))
group.long 0xE88++0x03
line.long 0x00 "GICD_NSACR34,Non-secure Access Control Register 34"
bitfld.long 0x00 30.--31. " NS_ACCESS559 ,Controls Non-secure access of the interrupt with ID559" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS558 ,Controls Non-secure access of the interrupt with ID558" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS557 ,Controls Non-secure access of the interrupt with ID557" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS556 ,Controls Non-secure access of the interrupt with ID556" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS555 ,Controls Non-secure access of the interrupt with ID555" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS554 ,Controls Non-secure access of the interrupt with ID554" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS553 ,Controls Non-secure access of the interrupt with ID553" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS552 ,Controls Non-secure access of the interrupt with ID552" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS551 ,Controls Non-secure access of the interrupt with ID551" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS550 ,Controls Non-secure access of the interrupt with ID550" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS549 ,Controls Non-secure access of the interrupt with ID549" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS548 ,Controls Non-secure access of the interrupt with ID548" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS547 ,Controls Non-secure access of the interrupt with ID547" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS546 ,Controls Non-secure access of the interrupt with ID546" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS545 ,Controls Non-secure access of the interrupt with ID545" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS544 ,Controls Non-secure access of the interrupt with ID544" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE88++0x03
hide.long 0x00 "GICD_NSACR34,Non-secure Access Control Register 34"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE8C)))
group.long 0xE8C++0x03
line.long 0x00 "GICD_NSACR35,Non-secure Access Control Register 35"
bitfld.long 0x00 30.--31. " NS_ACCESS575 ,Controls Non-secure access of the interrupt with ID575" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS574 ,Controls Non-secure access of the interrupt with ID574" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS573 ,Controls Non-secure access of the interrupt with ID573" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS572 ,Controls Non-secure access of the interrupt with ID572" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS571 ,Controls Non-secure access of the interrupt with ID571" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS570 ,Controls Non-secure access of the interrupt with ID570" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS569 ,Controls Non-secure access of the interrupt with ID569" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS568 ,Controls Non-secure access of the interrupt with ID568" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS567 ,Controls Non-secure access of the interrupt with ID567" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS566 ,Controls Non-secure access of the interrupt with ID566" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS565 ,Controls Non-secure access of the interrupt with ID565" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS564 ,Controls Non-secure access of the interrupt with ID564" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS563 ,Controls Non-secure access of the interrupt with ID563" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS562 ,Controls Non-secure access of the interrupt with ID562" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS561 ,Controls Non-secure access of the interrupt with ID561" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS560 ,Controls Non-secure access of the interrupt with ID560" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE8C++0x03
hide.long 0x00 "GICD_NSACR35,Non-secure Access Control Register 35"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE90)))
group.long 0xE90++0x03
line.long 0x00 "GICD_NSACR36,Non-secure Access Control Register 36"
bitfld.long 0x00 30.--31. " NS_ACCESS591 ,Controls Non-secure access of the interrupt with ID591" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS590 ,Controls Non-secure access of the interrupt with ID590" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS589 ,Controls Non-secure access of the interrupt with ID589" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS588 ,Controls Non-secure access of the interrupt with ID588" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS587 ,Controls Non-secure access of the interrupt with ID587" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS586 ,Controls Non-secure access of the interrupt with ID586" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS585 ,Controls Non-secure access of the interrupt with ID585" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS584 ,Controls Non-secure access of the interrupt with ID584" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS583 ,Controls Non-secure access of the interrupt with ID583" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS582 ,Controls Non-secure access of the interrupt with ID582" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS581 ,Controls Non-secure access of the interrupt with ID581" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS580 ,Controls Non-secure access of the interrupt with ID580" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS579 ,Controls Non-secure access of the interrupt with ID579" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS578 ,Controls Non-secure access of the interrupt with ID578" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS577 ,Controls Non-secure access of the interrupt with ID577" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS576 ,Controls Non-secure access of the interrupt with ID576" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE90++0x03
hide.long 0x00 "GICD_NSACR36,Non-secure Access Control Register 36"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE94)))
group.long 0xE94++0x03
line.long 0x00 "GICD_NSACR37,Non-secure Access Control Register 37"
bitfld.long 0x00 30.--31. " NS_ACCESS607 ,Controls Non-secure access of the interrupt with ID607" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS606 ,Controls Non-secure access of the interrupt with ID606" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS605 ,Controls Non-secure access of the interrupt with ID605" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS604 ,Controls Non-secure access of the interrupt with ID604" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS603 ,Controls Non-secure access of the interrupt with ID603" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS602 ,Controls Non-secure access of the interrupt with ID602" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS601 ,Controls Non-secure access of the interrupt with ID601" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS600 ,Controls Non-secure access of the interrupt with ID600" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS599 ,Controls Non-secure access of the interrupt with ID599" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS598 ,Controls Non-secure access of the interrupt with ID598" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS597 ,Controls Non-secure access of the interrupt with ID597" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS596 ,Controls Non-secure access of the interrupt with ID596" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS595 ,Controls Non-secure access of the interrupt with ID595" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS594 ,Controls Non-secure access of the interrupt with ID594" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS593 ,Controls Non-secure access of the interrupt with ID593" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS592 ,Controls Non-secure access of the interrupt with ID592" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE94++0x03
hide.long 0x00 "GICD_NSACR37,Non-secure Access Control Register 37"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE98)))
group.long 0xE98++0x03
line.long 0x00 "GICD_NSACR38,Non-secure Access Control Register 38"
bitfld.long 0x00 30.--31. " NS_ACCESS623 ,Controls Non-secure access of the interrupt with ID623" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS622 ,Controls Non-secure access of the interrupt with ID622" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS621 ,Controls Non-secure access of the interrupt with ID621" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS620 ,Controls Non-secure access of the interrupt with ID620" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS619 ,Controls Non-secure access of the interrupt with ID619" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS618 ,Controls Non-secure access of the interrupt with ID618" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS617 ,Controls Non-secure access of the interrupt with ID617" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS616 ,Controls Non-secure access of the interrupt with ID616" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS615 ,Controls Non-secure access of the interrupt with ID615" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS614 ,Controls Non-secure access of the interrupt with ID614" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS613 ,Controls Non-secure access of the interrupt with ID613" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS612 ,Controls Non-secure access of the interrupt with ID612" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS611 ,Controls Non-secure access of the interrupt with ID611" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS610 ,Controls Non-secure access of the interrupt with ID610" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS609 ,Controls Non-secure access of the interrupt with ID609" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS608 ,Controls Non-secure access of the interrupt with ID608" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE98++0x03
hide.long 0x00 "GICD_NSACR38,Non-secure Access Control Register 38"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xE9C)))
group.long 0xE9C++0x03
line.long 0x00 "GICD_NSACR39,Non-secure Access Control Register 39"
bitfld.long 0x00 30.--31. " NS_ACCESS639 ,Controls Non-secure access of the interrupt with ID639" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS638 ,Controls Non-secure access of the interrupt with ID638" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS637 ,Controls Non-secure access of the interrupt with ID637" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS636 ,Controls Non-secure access of the interrupt with ID636" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS635 ,Controls Non-secure access of the interrupt with ID635" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS634 ,Controls Non-secure access of the interrupt with ID634" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS633 ,Controls Non-secure access of the interrupt with ID633" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS632 ,Controls Non-secure access of the interrupt with ID632" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS631 ,Controls Non-secure access of the interrupt with ID631" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS630 ,Controls Non-secure access of the interrupt with ID630" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS629 ,Controls Non-secure access of the interrupt with ID629" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS628 ,Controls Non-secure access of the interrupt with ID628" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS627 ,Controls Non-secure access of the interrupt with ID627" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS626 ,Controls Non-secure access of the interrupt with ID626" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS625 ,Controls Non-secure access of the interrupt with ID625" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS624 ,Controls Non-secure access of the interrupt with ID624" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xE9C++0x03
hide.long 0x00 "GICD_NSACR39,Non-secure Access Control Register 39"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEA0)))
group.long 0xEA0++0x03
line.long 0x00 "GICD_NSACR40,Non-secure Access Control Register 40"
bitfld.long 0x00 30.--31. " NS_ACCESS655 ,Controls Non-secure access of the interrupt with ID655" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS654 ,Controls Non-secure access of the interrupt with ID654" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS653 ,Controls Non-secure access of the interrupt with ID653" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS652 ,Controls Non-secure access of the interrupt with ID652" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS651 ,Controls Non-secure access of the interrupt with ID651" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS650 ,Controls Non-secure access of the interrupt with ID650" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS649 ,Controls Non-secure access of the interrupt with ID649" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS648 ,Controls Non-secure access of the interrupt with ID648" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS647 ,Controls Non-secure access of the interrupt with ID647" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS646 ,Controls Non-secure access of the interrupt with ID646" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS645 ,Controls Non-secure access of the interrupt with ID645" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS644 ,Controls Non-secure access of the interrupt with ID644" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS643 ,Controls Non-secure access of the interrupt with ID643" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS642 ,Controls Non-secure access of the interrupt with ID642" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS641 ,Controls Non-secure access of the interrupt with ID641" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS640 ,Controls Non-secure access of the interrupt with ID640" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEA0++0x03
hide.long 0x00 "GICD_NSACR40,Non-secure Access Control Register 40"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEA4)))
group.long 0xEA4++0x03
line.long 0x00 "GICD_NSACR41,Non-secure Access Control Register 41"
bitfld.long 0x00 30.--31. " NS_ACCESS671 ,Controls Non-secure access of the interrupt with ID671" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS670 ,Controls Non-secure access of the interrupt with ID670" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS669 ,Controls Non-secure access of the interrupt with ID669" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS668 ,Controls Non-secure access of the interrupt with ID668" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS667 ,Controls Non-secure access of the interrupt with ID667" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS666 ,Controls Non-secure access of the interrupt with ID666" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS665 ,Controls Non-secure access of the interrupt with ID665" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS664 ,Controls Non-secure access of the interrupt with ID664" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS663 ,Controls Non-secure access of the interrupt with ID663" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS662 ,Controls Non-secure access of the interrupt with ID662" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS661 ,Controls Non-secure access of the interrupt with ID661" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS660 ,Controls Non-secure access of the interrupt with ID660" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS659 ,Controls Non-secure access of the interrupt with ID659" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS658 ,Controls Non-secure access of the interrupt with ID658" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS657 ,Controls Non-secure access of the interrupt with ID657" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS656 ,Controls Non-secure access of the interrupt with ID656" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEA4++0x03
hide.long 0x00 "GICD_NSACR41,Non-secure Access Control Register 41"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEA8)))
group.long 0xEA8++0x03
line.long 0x00 "GICD_NSACR42,Non-secure Access Control Register 42"
bitfld.long 0x00 30.--31. " NS_ACCESS687 ,Controls Non-secure access of the interrupt with ID687" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS686 ,Controls Non-secure access of the interrupt with ID686" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS685 ,Controls Non-secure access of the interrupt with ID685" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS684 ,Controls Non-secure access of the interrupt with ID684" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS683 ,Controls Non-secure access of the interrupt with ID683" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS682 ,Controls Non-secure access of the interrupt with ID682" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS681 ,Controls Non-secure access of the interrupt with ID681" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS680 ,Controls Non-secure access of the interrupt with ID680" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS679 ,Controls Non-secure access of the interrupt with ID679" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS678 ,Controls Non-secure access of the interrupt with ID678" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS677 ,Controls Non-secure access of the interrupt with ID677" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS676 ,Controls Non-secure access of the interrupt with ID676" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS675 ,Controls Non-secure access of the interrupt with ID675" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS674 ,Controls Non-secure access of the interrupt with ID674" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS673 ,Controls Non-secure access of the interrupt with ID673" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS672 ,Controls Non-secure access of the interrupt with ID672" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEA8++0x03
hide.long 0x00 "GICD_NSACR42,Non-secure Access Control Register 42"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEAC)))
group.long 0xEAC++0x03
line.long 0x00 "GICD_NSACR43,Non-secure Access Control Register 43"
bitfld.long 0x00 30.--31. " NS_ACCESS703 ,Controls Non-secure access of the interrupt with ID703" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS702 ,Controls Non-secure access of the interrupt with ID702" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS701 ,Controls Non-secure access of the interrupt with ID701" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS700 ,Controls Non-secure access of the interrupt with ID700" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS699 ,Controls Non-secure access of the interrupt with ID699" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS698 ,Controls Non-secure access of the interrupt with ID698" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS697 ,Controls Non-secure access of the interrupt with ID697" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS696 ,Controls Non-secure access of the interrupt with ID696" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS695 ,Controls Non-secure access of the interrupt with ID695" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS694 ,Controls Non-secure access of the interrupt with ID694" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS693 ,Controls Non-secure access of the interrupt with ID693" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS692 ,Controls Non-secure access of the interrupt with ID692" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS691 ,Controls Non-secure access of the interrupt with ID691" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS690 ,Controls Non-secure access of the interrupt with ID690" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS689 ,Controls Non-secure access of the interrupt with ID689" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS688 ,Controls Non-secure access of the interrupt with ID688" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEAC++0x03
hide.long 0x00 "GICD_NSACR43,Non-secure Access Control Register 43"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEB0)))
group.long 0xEB0++0x03
line.long 0x00 "GICD_NSACR44,Non-secure Access Control Register 44"
bitfld.long 0x00 30.--31. " NS_ACCESS719 ,Controls Non-secure access of the interrupt with ID719" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS718 ,Controls Non-secure access of the interrupt with ID718" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS717 ,Controls Non-secure access of the interrupt with ID717" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS716 ,Controls Non-secure access of the interrupt with ID716" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS715 ,Controls Non-secure access of the interrupt with ID715" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS714 ,Controls Non-secure access of the interrupt with ID714" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS713 ,Controls Non-secure access of the interrupt with ID713" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS712 ,Controls Non-secure access of the interrupt with ID712" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS711 ,Controls Non-secure access of the interrupt with ID711" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS710 ,Controls Non-secure access of the interrupt with ID710" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS709 ,Controls Non-secure access of the interrupt with ID709" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS708 ,Controls Non-secure access of the interrupt with ID708" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS707 ,Controls Non-secure access of the interrupt with ID707" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS706 ,Controls Non-secure access of the interrupt with ID706" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS705 ,Controls Non-secure access of the interrupt with ID705" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS704 ,Controls Non-secure access of the interrupt with ID704" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEB0++0x03
hide.long 0x00 "GICD_NSACR44,Non-secure Access Control Register 44"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEB4)))
group.long 0xEB4++0x03
line.long 0x00 "GICD_NSACR45,Non-secure Access Control Register 45"
bitfld.long 0x00 30.--31. " NS_ACCESS735 ,Controls Non-secure access of the interrupt with ID735" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS734 ,Controls Non-secure access of the interrupt with ID734" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS733 ,Controls Non-secure access of the interrupt with ID733" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS732 ,Controls Non-secure access of the interrupt with ID732" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS731 ,Controls Non-secure access of the interrupt with ID731" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS730 ,Controls Non-secure access of the interrupt with ID730" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS729 ,Controls Non-secure access of the interrupt with ID729" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS728 ,Controls Non-secure access of the interrupt with ID728" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS727 ,Controls Non-secure access of the interrupt with ID727" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS726 ,Controls Non-secure access of the interrupt with ID726" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS725 ,Controls Non-secure access of the interrupt with ID725" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS724 ,Controls Non-secure access of the interrupt with ID724" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS723 ,Controls Non-secure access of the interrupt with ID723" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS722 ,Controls Non-secure access of the interrupt with ID722" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS721 ,Controls Non-secure access of the interrupt with ID721" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS720 ,Controls Non-secure access of the interrupt with ID720" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEB4++0x03
hide.long 0x00 "GICD_NSACR45,Non-secure Access Control Register 45"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEB8)))
group.long 0xEB8++0x03
line.long 0x00 "GICD_NSACR46,Non-secure Access Control Register 46"
bitfld.long 0x00 30.--31. " NS_ACCESS751 ,Controls Non-secure access of the interrupt with ID751" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS750 ,Controls Non-secure access of the interrupt with ID750" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS749 ,Controls Non-secure access of the interrupt with ID749" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS748 ,Controls Non-secure access of the interrupt with ID748" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS747 ,Controls Non-secure access of the interrupt with ID747" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS746 ,Controls Non-secure access of the interrupt with ID746" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS745 ,Controls Non-secure access of the interrupt with ID745" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS744 ,Controls Non-secure access of the interrupt with ID744" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS743 ,Controls Non-secure access of the interrupt with ID743" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS742 ,Controls Non-secure access of the interrupt with ID742" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS741 ,Controls Non-secure access of the interrupt with ID741" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS740 ,Controls Non-secure access of the interrupt with ID740" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS739 ,Controls Non-secure access of the interrupt with ID739" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS738 ,Controls Non-secure access of the interrupt with ID738" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS737 ,Controls Non-secure access of the interrupt with ID737" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS736 ,Controls Non-secure access of the interrupt with ID736" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEB8++0x03
hide.long 0x00 "GICD_NSACR46,Non-secure Access Control Register 46"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEBC)))
group.long 0xEBC++0x03
line.long 0x00 "GICD_NSACR47,Non-secure Access Control Register 47"
bitfld.long 0x00 30.--31. " NS_ACCESS767 ,Controls Non-secure access of the interrupt with ID767" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS766 ,Controls Non-secure access of the interrupt with ID766" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS765 ,Controls Non-secure access of the interrupt with ID765" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS764 ,Controls Non-secure access of the interrupt with ID764" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS763 ,Controls Non-secure access of the interrupt with ID763" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS762 ,Controls Non-secure access of the interrupt with ID762" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS761 ,Controls Non-secure access of the interrupt with ID761" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS760 ,Controls Non-secure access of the interrupt with ID760" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS759 ,Controls Non-secure access of the interrupt with ID759" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS758 ,Controls Non-secure access of the interrupt with ID758" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS757 ,Controls Non-secure access of the interrupt with ID757" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS756 ,Controls Non-secure access of the interrupt with ID756" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS755 ,Controls Non-secure access of the interrupt with ID755" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS754 ,Controls Non-secure access of the interrupt with ID754" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS753 ,Controls Non-secure access of the interrupt with ID753" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS752 ,Controls Non-secure access of the interrupt with ID752" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEBC++0x03
hide.long 0x00 "GICD_NSACR47,Non-secure Access Control Register 47"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEC0)))
group.long 0xEC0++0x03
line.long 0x00 "GICD_NSACR48,Non-secure Access Control Register 48"
bitfld.long 0x00 30.--31. " NS_ACCESS783 ,Controls Non-secure access of the interrupt with ID783" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS782 ,Controls Non-secure access of the interrupt with ID782" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS781 ,Controls Non-secure access of the interrupt with ID781" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS780 ,Controls Non-secure access of the interrupt with ID780" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS779 ,Controls Non-secure access of the interrupt with ID779" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS778 ,Controls Non-secure access of the interrupt with ID778" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS777 ,Controls Non-secure access of the interrupt with ID777" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS776 ,Controls Non-secure access of the interrupt with ID776" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS775 ,Controls Non-secure access of the interrupt with ID775" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS774 ,Controls Non-secure access of the interrupt with ID774" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS773 ,Controls Non-secure access of the interrupt with ID773" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS772 ,Controls Non-secure access of the interrupt with ID772" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS771 ,Controls Non-secure access of the interrupt with ID771" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS770 ,Controls Non-secure access of the interrupt with ID770" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS769 ,Controls Non-secure access of the interrupt with ID769" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS768 ,Controls Non-secure access of the interrupt with ID768" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEC0++0x03
hide.long 0x00 "GICD_NSACR48,Non-secure Access Control Register 48"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEC4)))
group.long 0xEC4++0x03
line.long 0x00 "GICD_NSACR49,Non-secure Access Control Register 49"
bitfld.long 0x00 30.--31. " NS_ACCESS799 ,Controls Non-secure access of the interrupt with ID799" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS798 ,Controls Non-secure access of the interrupt with ID798" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS797 ,Controls Non-secure access of the interrupt with ID797" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS796 ,Controls Non-secure access of the interrupt with ID796" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS795 ,Controls Non-secure access of the interrupt with ID795" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS794 ,Controls Non-secure access of the interrupt with ID794" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS793 ,Controls Non-secure access of the interrupt with ID793" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS792 ,Controls Non-secure access of the interrupt with ID792" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS791 ,Controls Non-secure access of the interrupt with ID791" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS790 ,Controls Non-secure access of the interrupt with ID790" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS789 ,Controls Non-secure access of the interrupt with ID789" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS788 ,Controls Non-secure access of the interrupt with ID788" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS787 ,Controls Non-secure access of the interrupt with ID787" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS786 ,Controls Non-secure access of the interrupt with ID786" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS785 ,Controls Non-secure access of the interrupt with ID785" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS784 ,Controls Non-secure access of the interrupt with ID784" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEC4++0x03
hide.long 0x00 "GICD_NSACR49,Non-secure Access Control Register 49"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEC8)))
group.long 0xEC8++0x03
line.long 0x00 "GICD_NSACR50,Non-secure Access Control Register 50"
bitfld.long 0x00 30.--31. " NS_ACCESS815 ,Controls Non-secure access of the interrupt with ID815" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS814 ,Controls Non-secure access of the interrupt with ID814" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS813 ,Controls Non-secure access of the interrupt with ID813" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS812 ,Controls Non-secure access of the interrupt with ID812" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS811 ,Controls Non-secure access of the interrupt with ID811" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS810 ,Controls Non-secure access of the interrupt with ID810" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS809 ,Controls Non-secure access of the interrupt with ID809" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS808 ,Controls Non-secure access of the interrupt with ID808" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS807 ,Controls Non-secure access of the interrupt with ID807" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS806 ,Controls Non-secure access of the interrupt with ID806" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS805 ,Controls Non-secure access of the interrupt with ID805" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS804 ,Controls Non-secure access of the interrupt with ID804" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS803 ,Controls Non-secure access of the interrupt with ID803" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS802 ,Controls Non-secure access of the interrupt with ID802" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS801 ,Controls Non-secure access of the interrupt with ID801" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS800 ,Controls Non-secure access of the interrupt with ID800" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEC8++0x03
hide.long 0x00 "GICD_NSACR50,Non-secure Access Control Register 50"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xECC)))
group.long 0xECC++0x03
line.long 0x00 "GICD_NSACR51,Non-secure Access Control Register 51"
bitfld.long 0x00 30.--31. " NS_ACCESS831 ,Controls Non-secure access of the interrupt with ID831" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS830 ,Controls Non-secure access of the interrupt with ID830" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS829 ,Controls Non-secure access of the interrupt with ID829" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS828 ,Controls Non-secure access of the interrupt with ID828" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS827 ,Controls Non-secure access of the interrupt with ID827" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS826 ,Controls Non-secure access of the interrupt with ID826" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS825 ,Controls Non-secure access of the interrupt with ID825" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS824 ,Controls Non-secure access of the interrupt with ID824" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS823 ,Controls Non-secure access of the interrupt with ID823" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS822 ,Controls Non-secure access of the interrupt with ID822" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS821 ,Controls Non-secure access of the interrupt with ID821" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS820 ,Controls Non-secure access of the interrupt with ID820" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS819 ,Controls Non-secure access of the interrupt with ID819" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS818 ,Controls Non-secure access of the interrupt with ID818" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS817 ,Controls Non-secure access of the interrupt with ID817" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS816 ,Controls Non-secure access of the interrupt with ID816" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xECC++0x03
hide.long 0x00 "GICD_NSACR51,Non-secure Access Control Register 51"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xED0)))
group.long 0xED0++0x03
line.long 0x00 "GICD_NSACR52,Non-secure Access Control Register 52"
bitfld.long 0x00 30.--31. " NS_ACCESS847 ,Controls Non-secure access of the interrupt with ID847" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS846 ,Controls Non-secure access of the interrupt with ID846" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS845 ,Controls Non-secure access of the interrupt with ID845" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS844 ,Controls Non-secure access of the interrupt with ID844" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS843 ,Controls Non-secure access of the interrupt with ID843" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS842 ,Controls Non-secure access of the interrupt with ID842" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS841 ,Controls Non-secure access of the interrupt with ID841" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS840 ,Controls Non-secure access of the interrupt with ID840" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS839 ,Controls Non-secure access of the interrupt with ID839" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS838 ,Controls Non-secure access of the interrupt with ID838" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS837 ,Controls Non-secure access of the interrupt with ID837" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS836 ,Controls Non-secure access of the interrupt with ID836" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS835 ,Controls Non-secure access of the interrupt with ID835" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS834 ,Controls Non-secure access of the interrupt with ID834" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS833 ,Controls Non-secure access of the interrupt with ID833" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS832 ,Controls Non-secure access of the interrupt with ID832" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xED0++0x03
hide.long 0x00 "GICD_NSACR52,Non-secure Access Control Register 52"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xED4)))
group.long 0xED4++0x03
line.long 0x00 "GICD_NSACR53,Non-secure Access Control Register 53"
bitfld.long 0x00 30.--31. " NS_ACCESS863 ,Controls Non-secure access of the interrupt with ID863" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS862 ,Controls Non-secure access of the interrupt with ID862" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS861 ,Controls Non-secure access of the interrupt with ID861" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS860 ,Controls Non-secure access of the interrupt with ID860" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS859 ,Controls Non-secure access of the interrupt with ID859" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS858 ,Controls Non-secure access of the interrupt with ID858" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS857 ,Controls Non-secure access of the interrupt with ID857" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS856 ,Controls Non-secure access of the interrupt with ID856" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS855 ,Controls Non-secure access of the interrupt with ID855" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS854 ,Controls Non-secure access of the interrupt with ID854" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS853 ,Controls Non-secure access of the interrupt with ID853" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS852 ,Controls Non-secure access of the interrupt with ID852" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS851 ,Controls Non-secure access of the interrupt with ID851" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS850 ,Controls Non-secure access of the interrupt with ID850" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS849 ,Controls Non-secure access of the interrupt with ID849" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS848 ,Controls Non-secure access of the interrupt with ID848" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xED4++0x03
hide.long 0x00 "GICD_NSACR53,Non-secure Access Control Register 53"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xED8)))
group.long 0xED8++0x03
line.long 0x00 "GICD_NSACR54,Non-secure Access Control Register 54"
bitfld.long 0x00 30.--31. " NS_ACCESS879 ,Controls Non-secure access of the interrupt with ID879" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS878 ,Controls Non-secure access of the interrupt with ID878" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS877 ,Controls Non-secure access of the interrupt with ID877" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS876 ,Controls Non-secure access of the interrupt with ID876" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS875 ,Controls Non-secure access of the interrupt with ID875" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS874 ,Controls Non-secure access of the interrupt with ID874" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS873 ,Controls Non-secure access of the interrupt with ID873" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS872 ,Controls Non-secure access of the interrupt with ID872" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS871 ,Controls Non-secure access of the interrupt with ID871" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS870 ,Controls Non-secure access of the interrupt with ID870" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS869 ,Controls Non-secure access of the interrupt with ID869" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS868 ,Controls Non-secure access of the interrupt with ID868" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS867 ,Controls Non-secure access of the interrupt with ID867" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS866 ,Controls Non-secure access of the interrupt with ID866" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS865 ,Controls Non-secure access of the interrupt with ID865" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS864 ,Controls Non-secure access of the interrupt with ID864" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xED8++0x03
hide.long 0x00 "GICD_NSACR54,Non-secure Access Control Register 54"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEDC)))
group.long 0xEDC++0x03
line.long 0x00 "GICD_NSACR55,Non-secure Access Control Register 55"
bitfld.long 0x00 30.--31. " NS_ACCESS895 ,Controls Non-secure access of the interrupt with ID895" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS894 ,Controls Non-secure access of the interrupt with ID894" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS893 ,Controls Non-secure access of the interrupt with ID893" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS892 ,Controls Non-secure access of the interrupt with ID892" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS891 ,Controls Non-secure access of the interrupt with ID891" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS890 ,Controls Non-secure access of the interrupt with ID890" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS889 ,Controls Non-secure access of the interrupt with ID889" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS888 ,Controls Non-secure access of the interrupt with ID888" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS887 ,Controls Non-secure access of the interrupt with ID887" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS886 ,Controls Non-secure access of the interrupt with ID886" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS885 ,Controls Non-secure access of the interrupt with ID885" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS884 ,Controls Non-secure access of the interrupt with ID884" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS883 ,Controls Non-secure access of the interrupt with ID883" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS882 ,Controls Non-secure access of the interrupt with ID882" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS881 ,Controls Non-secure access of the interrupt with ID881" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS880 ,Controls Non-secure access of the interrupt with ID880" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEDC++0x03
hide.long 0x00 "GICD_NSACR55,Non-secure Access Control Register 55"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEE0)))
group.long 0xEE0++0x03
line.long 0x00 "GICD_NSACR56,Non-secure Access Control Register 56"
bitfld.long 0x00 30.--31. " NS_ACCESS911 ,Controls Non-secure access of the interrupt with ID911" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS910 ,Controls Non-secure access of the interrupt with ID910" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS909 ,Controls Non-secure access of the interrupt with ID909" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS908 ,Controls Non-secure access of the interrupt with ID908" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS907 ,Controls Non-secure access of the interrupt with ID907" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS906 ,Controls Non-secure access of the interrupt with ID906" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS905 ,Controls Non-secure access of the interrupt with ID905" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS904 ,Controls Non-secure access of the interrupt with ID904" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS903 ,Controls Non-secure access of the interrupt with ID903" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS902 ,Controls Non-secure access of the interrupt with ID902" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS901 ,Controls Non-secure access of the interrupt with ID901" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS900 ,Controls Non-secure access of the interrupt with ID900" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS899 ,Controls Non-secure access of the interrupt with ID899" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS898 ,Controls Non-secure access of the interrupt with ID898" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS897 ,Controls Non-secure access of the interrupt with ID897" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS896 ,Controls Non-secure access of the interrupt with ID896" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEE0++0x03
hide.long 0x00 "GICD_NSACR56,Non-secure Access Control Register 56"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEE4)))
group.long 0xEE4++0x03
line.long 0x00 "GICD_NSACR57,Non-secure Access Control Register 57"
bitfld.long 0x00 30.--31. " NS_ACCESS927 ,Controls Non-secure access of the interrupt with ID927" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS926 ,Controls Non-secure access of the interrupt with ID926" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS925 ,Controls Non-secure access of the interrupt with ID925" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS924 ,Controls Non-secure access of the interrupt with ID924" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS923 ,Controls Non-secure access of the interrupt with ID923" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS922 ,Controls Non-secure access of the interrupt with ID922" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS921 ,Controls Non-secure access of the interrupt with ID921" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS920 ,Controls Non-secure access of the interrupt with ID920" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS919 ,Controls Non-secure access of the interrupt with ID919" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS918 ,Controls Non-secure access of the interrupt with ID918" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS917 ,Controls Non-secure access of the interrupt with ID917" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS916 ,Controls Non-secure access of the interrupt with ID916" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS915 ,Controls Non-secure access of the interrupt with ID915" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS914 ,Controls Non-secure access of the interrupt with ID914" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS913 ,Controls Non-secure access of the interrupt with ID913" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS912 ,Controls Non-secure access of the interrupt with ID912" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEE4++0x03
hide.long 0x00 "GICD_NSACR57,Non-secure Access Control Register 57"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEE8)))
group.long 0xEE8++0x03
line.long 0x00 "GICD_NSACR58,Non-secure Access Control Register 58"
bitfld.long 0x00 30.--31. " NS_ACCESS943 ,Controls Non-secure access of the interrupt with ID943" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS942 ,Controls Non-secure access of the interrupt with ID942" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS941 ,Controls Non-secure access of the interrupt with ID941" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS940 ,Controls Non-secure access of the interrupt with ID940" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS939 ,Controls Non-secure access of the interrupt with ID939" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS938 ,Controls Non-secure access of the interrupt with ID938" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS937 ,Controls Non-secure access of the interrupt with ID937" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS936 ,Controls Non-secure access of the interrupt with ID936" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS935 ,Controls Non-secure access of the interrupt with ID935" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS934 ,Controls Non-secure access of the interrupt with ID934" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS933 ,Controls Non-secure access of the interrupt with ID933" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS932 ,Controls Non-secure access of the interrupt with ID932" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS931 ,Controls Non-secure access of the interrupt with ID931" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS930 ,Controls Non-secure access of the interrupt with ID930" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS929 ,Controls Non-secure access of the interrupt with ID929" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS928 ,Controls Non-secure access of the interrupt with ID928" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEE8++0x03
hide.long 0x00 "GICD_NSACR58,Non-secure Access Control Register 58"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEEC)))
group.long 0xEEC++0x03
line.long 0x00 "GICD_NSACR59,Non-secure Access Control Register 59"
bitfld.long 0x00 30.--31. " NS_ACCESS959 ,Controls Non-secure access of the interrupt with ID959" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS958 ,Controls Non-secure access of the interrupt with ID958" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS957 ,Controls Non-secure access of the interrupt with ID957" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS956 ,Controls Non-secure access of the interrupt with ID956" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS955 ,Controls Non-secure access of the interrupt with ID955" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS954 ,Controls Non-secure access of the interrupt with ID954" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS953 ,Controls Non-secure access of the interrupt with ID953" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS952 ,Controls Non-secure access of the interrupt with ID952" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS951 ,Controls Non-secure access of the interrupt with ID951" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS950 ,Controls Non-secure access of the interrupt with ID950" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS949 ,Controls Non-secure access of the interrupt with ID949" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS948 ,Controls Non-secure access of the interrupt with ID948" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS947 ,Controls Non-secure access of the interrupt with ID947" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS946 ,Controls Non-secure access of the interrupt with ID946" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS945 ,Controls Non-secure access of the interrupt with ID945" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS944 ,Controls Non-secure access of the interrupt with ID944" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEEC++0x03
hide.long 0x00 "GICD_NSACR59,Non-secure Access Control Register 59"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEF0)))
group.long 0xEF0++0x03
line.long 0x00 "GICD_NSACR60,Non-secure Access Control Register 60"
bitfld.long 0x00 30.--31. " NS_ACCESS975 ,Controls Non-secure access of the interrupt with ID975" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS974 ,Controls Non-secure access of the interrupt with ID974" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS973 ,Controls Non-secure access of the interrupt with ID973" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS972 ,Controls Non-secure access of the interrupt with ID972" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS971 ,Controls Non-secure access of the interrupt with ID971" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS970 ,Controls Non-secure access of the interrupt with ID970" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS969 ,Controls Non-secure access of the interrupt with ID969" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS968 ,Controls Non-secure access of the interrupt with ID968" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS967 ,Controls Non-secure access of the interrupt with ID967" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS966 ,Controls Non-secure access of the interrupt with ID966" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS965 ,Controls Non-secure access of the interrupt with ID965" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS964 ,Controls Non-secure access of the interrupt with ID964" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS963 ,Controls Non-secure access of the interrupt with ID963" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS962 ,Controls Non-secure access of the interrupt with ID962" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS961 ,Controls Non-secure access of the interrupt with ID961" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS960 ,Controls Non-secure access of the interrupt with ID960" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEF0++0x03
hide.long 0x00 "GICD_NSACR60,Non-secure Access Control Register 60"
endif
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICD",-1.)+0xEF4)))
group.long 0xEF4++0x03
line.long 0x00 "GICD_NSACR61,Non-secure Access Control Register 61"
bitfld.long 0x00 30.--31. " NS_ACCESS991 ,Controls Non-secure access of the interrupt with ID991" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 28.--29. " NS_ACCESS990 ,Controls Non-secure access of the interrupt with ID990" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 26.--27. " NS_ACCESS989 ,Controls Non-secure access of the interrupt with ID989" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 24.--25. " NS_ACCESS988 ,Controls Non-secure access of the interrupt with ID988" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 22.--23. " NS_ACCESS987 ,Controls Non-secure access of the interrupt with ID987" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 20.--21. " NS_ACCESS986 ,Controls Non-secure access of the interrupt with ID986" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 18.--19. " NS_ACCESS985 ,Controls Non-secure access of the interrupt with ID985" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 16.--17. " NS_ACCESS984 ,Controls Non-secure access of the interrupt with ID984" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 14.--15. " NS_ACCESS983 ,Controls Non-secure access of the interrupt with ID983" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 12.--13. " NS_ACCESS982 ,Controls Non-secure access of the interrupt with ID982" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 10.--11. " NS_ACCESS981 ,Controls Non-secure access of the interrupt with ID981" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 8.--9. " NS_ACCESS980 ,Controls Non-secure access of the interrupt with ID980" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 6.--7. " NS_ACCESS979 ,Controls Non-secure access of the interrupt with ID979" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 4.--5. " NS_ACCESS978 ,Controls Non-secure access of the interrupt with ID978" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 2.--3. " NS_ACCESS977 ,Controls Non-secure access of the interrupt with ID977" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
textline "                       "
bitfld.long 0x00 0.--1. " NS_ACCESS976 ,Controls Non-secure access of the interrupt with ID976" "No access,SET_CLR_PENDR/SETSPI_NSR/SGIR,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER,SET_CLR_PENDR/SETSPI_NSR/SGIR/CLRSPI_NSR/SET_CLR_ACTIVER/ITARGETSR/IROUTER"
else
hgroup.long 0xEF4++0x03
hide.long 0x00 "GICD_NSACR61,Non-secure Access Control Register 61"
endif
tree.end
width 25.
tree "Software Generated Interrupt"
if (((per.l(COMP.BASE("GICD",-1.)))&0x10)==0x10)
hgroup.long 0x0F00++0x03
hide.long 0x00 "GICD_SGIR,Software Generated Interrupt Register"
hgroup.long 0xF10++0x03
hide.long 0x00 "GICD_CLR_PENDSGIR0,SGI Clear Pending Register 0"
hgroup.long 0xF14++0x03
hide.long 0x00 "GICD_CLR_PENDSGIR1,SGI Clear Pending Register 1"
hgroup.long 0xF18++0x03
hide.long 0x00 "GICD_CLR_PENDSGIR2,SGI Clear Pending Register 2"
hgroup.long 0xF1C++0x03
hide.long 0x00 "GICD_CLR_PENDSGIR3,SGI Clear Pending Register 3"
hgroup.long 0xF20++0x03
hide.long 0x00 "GICD_SET_PENDSGIR0,SGI Set Pending Register 0"
hgroup.long 0xF24++0x03
hide.long 0x00 "GICD_SET_PENDSGIR1,SGI Set Pending Register 1"
hgroup.long 0xF28++0x03
hide.long 0x00 "GICD_SET_PENDSGIR2,SGI Set Pending Register 2"
hgroup.long 0xF2C++0x03
hide.long 0x00 "GICD_SET_PENDSGIR3,SGI Set Pending Register 3"
else
wgroup.long 0x0F00++0x03
line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register"
group.long 0xF10++0x03
line.long 0x00 "GICD_CLR_PENDSGIR0,SGI Clear Pending Register 0"
group.long 0xF14++0x03
line.long 0x00 "GICD_CLR_PENDSGIR1,SGI Clear Pending Register 1"
group.long 0xF18++0x03
line.long 0x00 "GICD_CLR_PENDSGIR2,SGI Clear Pending Register 2"
group.long 0xF1C++0x03
line.long 0x00 "GICD_CLR_PENDSGIR3,SGI Clear Pending Register 3"
group.long 0xF20++0x03
line.long 0x00 "GICD_SET_PENDSGIR0,SGI Set Pending Register 0"
group.long 0xF24++0x03
line.long 0x00 "GICD_SET_PENDSGIR1,SGI Set Pending Register 1"
group.long 0xF28++0x03
line.long 0x00 "GICD_SET_PENDSGIR2,SGI Set Pending Register 2"
group.long 0xF2C++0x03
line.long 0x00 "GICD_SET_PENDSGIR3,SGI Set Pending Register 3"
endif
tree.end
width 24.
tree "Interrupt Routing Registers"
group.quad 0x6100++0x07
line.quad 0x00 "GICD_IROUTER32 ,Interrupt Routing Register 32 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6108++0x07
line.quad 0x00 "GICD_IROUTER33 ,Interrupt Routing Register 33 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6110++0x07
line.quad 0x00 "GICD_IROUTER34 ,Interrupt Routing Register 34 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6118++0x07
line.quad 0x00 "GICD_IROUTER35 ,Interrupt Routing Register 35 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6120++0x07
line.quad 0x00 "GICD_IROUTER36 ,Interrupt Routing Register 36 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6128++0x07
line.quad 0x00 "GICD_IROUTER37 ,Interrupt Routing Register 37 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6130++0x07
line.quad 0x00 "GICD_IROUTER38 ,Interrupt Routing Register 38 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6138++0x07
line.quad 0x00 "GICD_IROUTER39 ,Interrupt Routing Register 39 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6140++0x07
line.quad 0x00 "GICD_IROUTER40 ,Interrupt Routing Register 40 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6148++0x07
line.quad 0x00 "GICD_IROUTER41 ,Interrupt Routing Register 41 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6150++0x07
line.quad 0x00 "GICD_IROUTER42 ,Interrupt Routing Register 42 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6158++0x07
line.quad 0x00 "GICD_IROUTER43 ,Interrupt Routing Register 43 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6160++0x07
line.quad 0x00 "GICD_IROUTER44 ,Interrupt Routing Register 44 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6168++0x07
line.quad 0x00 "GICD_IROUTER45 ,Interrupt Routing Register 45 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6170++0x07
line.quad 0x00 "GICD_IROUTER46 ,Interrupt Routing Register 46 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6178++0x07
line.quad 0x00 "GICD_IROUTER47 ,Interrupt Routing Register 47 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6180++0x07
line.quad 0x00 "GICD_IROUTER48 ,Interrupt Routing Register 48 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6188++0x07
line.quad 0x00 "GICD_IROUTER49 ,Interrupt Routing Register 49 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6190++0x07
line.quad 0x00 "GICD_IROUTER50 ,Interrupt Routing Register 50 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6198++0x07
line.quad 0x00 "GICD_IROUTER51 ,Interrupt Routing Register 51 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61A0++0x07
line.quad 0x00 "GICD_IROUTER52 ,Interrupt Routing Register 52 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61A8++0x07
line.quad 0x00 "GICD_IROUTER53 ,Interrupt Routing Register 53 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61B0++0x07
line.quad 0x00 "GICD_IROUTER54 ,Interrupt Routing Register 54 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61B8++0x07
line.quad 0x00 "GICD_IROUTER55 ,Interrupt Routing Register 55 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61C0++0x07
line.quad 0x00 "GICD_IROUTER56 ,Interrupt Routing Register 56 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61C8++0x07
line.quad 0x00 "GICD_IROUTER57 ,Interrupt Routing Register 57 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61D0++0x07
line.quad 0x00 "GICD_IROUTER58 ,Interrupt Routing Register 58 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61D8++0x07
line.quad 0x00 "GICD_IROUTER59 ,Interrupt Routing Register 59 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61E0++0x07
line.quad 0x00 "GICD_IROUTER60 ,Interrupt Routing Register 60 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61E8++0x07
line.quad 0x00 "GICD_IROUTER61 ,Interrupt Routing Register 61 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61F0++0x07
line.quad 0x00 "GICD_IROUTER62 ,Interrupt Routing Register 62 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x61F8++0x07
line.quad 0x00 "GICD_IROUTER63 ,Interrupt Routing Register 63 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6200++0x07
line.quad 0x00 "GICD_IROUTER64 ,Interrupt Routing Register 64 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6208++0x07
line.quad 0x00 "GICD_IROUTER65 ,Interrupt Routing Register 65 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6210++0x07
line.quad 0x00 "GICD_IROUTER66 ,Interrupt Routing Register 66 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6218++0x07
line.quad 0x00 "GICD_IROUTER67 ,Interrupt Routing Register 67 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6220++0x07
line.quad 0x00 "GICD_IROUTER68 ,Interrupt Routing Register 68 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6228++0x07
line.quad 0x00 "GICD_IROUTER69 ,Interrupt Routing Register 69 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6230++0x07
line.quad 0x00 "GICD_IROUTER70 ,Interrupt Routing Register 70 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6238++0x07
line.quad 0x00 "GICD_IROUTER71 ,Interrupt Routing Register 71 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6240++0x07
line.quad 0x00 "GICD_IROUTER72 ,Interrupt Routing Register 72 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6248++0x07
line.quad 0x00 "GICD_IROUTER73 ,Interrupt Routing Register 73 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6250++0x07
line.quad 0x00 "GICD_IROUTER74 ,Interrupt Routing Register 74 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6258++0x07
line.quad 0x00 "GICD_IROUTER75 ,Interrupt Routing Register 75 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6260++0x07
line.quad 0x00 "GICD_IROUTER76 ,Interrupt Routing Register 76 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6268++0x07
line.quad 0x00 "GICD_IROUTER77 ,Interrupt Routing Register 77 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6270++0x07
line.quad 0x00 "GICD_IROUTER78 ,Interrupt Routing Register 78 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6278++0x07
line.quad 0x00 "GICD_IROUTER79 ,Interrupt Routing Register 79 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6280++0x07
line.quad 0x00 "GICD_IROUTER80 ,Interrupt Routing Register 80 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6288++0x07
line.quad 0x00 "GICD_IROUTER81 ,Interrupt Routing Register 81 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6290++0x07
line.quad 0x00 "GICD_IROUTER82 ,Interrupt Routing Register 82 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6298++0x07
line.quad 0x00 "GICD_IROUTER83 ,Interrupt Routing Register 83 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62A0++0x07
line.quad 0x00 "GICD_IROUTER84 ,Interrupt Routing Register 84 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62A8++0x07
line.quad 0x00 "GICD_IROUTER85 ,Interrupt Routing Register 85 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62B0++0x07
line.quad 0x00 "GICD_IROUTER86 ,Interrupt Routing Register 86 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62B8++0x07
line.quad 0x00 "GICD_IROUTER87 ,Interrupt Routing Register 87 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62C0++0x07
line.quad 0x00 "GICD_IROUTER88 ,Interrupt Routing Register 88 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62C8++0x07
line.quad 0x00 "GICD_IROUTER89 ,Interrupt Routing Register 89 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62D0++0x07
line.quad 0x00 "GICD_IROUTER90 ,Interrupt Routing Register 90 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62D8++0x07
line.quad 0x00 "GICD_IROUTER91 ,Interrupt Routing Register 91 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62E0++0x07
line.quad 0x00 "GICD_IROUTER92 ,Interrupt Routing Register 92 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62E8++0x07
line.quad 0x00 "GICD_IROUTER93 ,Interrupt Routing Register 93 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62F0++0x07
line.quad 0x00 "GICD_IROUTER94 ,Interrupt Routing Register 94 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x62F8++0x07
line.quad 0x00 "GICD_IROUTER95 ,Interrupt Routing Register 95 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6300++0x07
line.quad 0x00 "GICD_IROUTER96 ,Interrupt Routing Register 96 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6308++0x07
line.quad 0x00 "GICD_IROUTER97 ,Interrupt Routing Register 97 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6310++0x07
line.quad 0x00 "GICD_IROUTER98 ,Interrupt Routing Register 98 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6318++0x07
line.quad 0x00 "GICD_IROUTER99 ,Interrupt Routing Register 99 "
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6320++0x07
line.quad 0x00 "GICD_IROUTER100,Interrupt Routing Register 100"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6328++0x07
line.quad 0x00 "GICD_IROUTER101,Interrupt Routing Register 101"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6330++0x07
line.quad 0x00 "GICD_IROUTER102,Interrupt Routing Register 102"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6338++0x07
line.quad 0x00 "GICD_IROUTER103,Interrupt Routing Register 103"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6340++0x07
line.quad 0x00 "GICD_IROUTER104,Interrupt Routing Register 104"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6348++0x07
line.quad 0x00 "GICD_IROUTER105,Interrupt Routing Register 105"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6350++0x07
line.quad 0x00 "GICD_IROUTER106,Interrupt Routing Register 106"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6358++0x07
line.quad 0x00 "GICD_IROUTER107,Interrupt Routing Register 107"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6360++0x07
line.quad 0x00 "GICD_IROUTER108,Interrupt Routing Register 108"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6368++0x07
line.quad 0x00 "GICD_IROUTER109,Interrupt Routing Register 109"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6370++0x07
line.quad 0x00 "GICD_IROUTER110,Interrupt Routing Register 110"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6378++0x07
line.quad 0x00 "GICD_IROUTER111,Interrupt Routing Register 111"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6380++0x07
line.quad 0x00 "GICD_IROUTER112,Interrupt Routing Register 112"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6388++0x07
line.quad 0x00 "GICD_IROUTER113,Interrupt Routing Register 113"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6390++0x07
line.quad 0x00 "GICD_IROUTER114,Interrupt Routing Register 114"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6398++0x07
line.quad 0x00 "GICD_IROUTER115,Interrupt Routing Register 115"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63A0++0x07
line.quad 0x00 "GICD_IROUTER116,Interrupt Routing Register 116"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63A8++0x07
line.quad 0x00 "GICD_IROUTER117,Interrupt Routing Register 117"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63B0++0x07
line.quad 0x00 "GICD_IROUTER118,Interrupt Routing Register 118"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63B8++0x07
line.quad 0x00 "GICD_IROUTER119,Interrupt Routing Register 119"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63C0++0x07
line.quad 0x00 "GICD_IROUTER120,Interrupt Routing Register 120"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63C8++0x07
line.quad 0x00 "GICD_IROUTER121,Interrupt Routing Register 121"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63D0++0x07
line.quad 0x00 "GICD_IROUTER122,Interrupt Routing Register 122"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63D8++0x07
line.quad 0x00 "GICD_IROUTER123,Interrupt Routing Register 123"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63E0++0x07
line.quad 0x00 "GICD_IROUTER124,Interrupt Routing Register 124"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63E8++0x07
line.quad 0x00 "GICD_IROUTER125,Interrupt Routing Register 125"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63F0++0x07
line.quad 0x00 "GICD_IROUTER126,Interrupt Routing Register 126"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x63F8++0x07
line.quad 0x00 "GICD_IROUTER127,Interrupt Routing Register 127"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6400++0x07
line.quad 0x00 "GICD_IROUTER128,Interrupt Routing Register 128"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6408++0x07
line.quad 0x00 "GICD_IROUTER129,Interrupt Routing Register 129"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6410++0x07
line.quad 0x00 "GICD_IROUTER130,Interrupt Routing Register 130"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6418++0x07
line.quad 0x00 "GICD_IROUTER131,Interrupt Routing Register 131"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6420++0x07
line.quad 0x00 "GICD_IROUTER132,Interrupt Routing Register 132"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6428++0x07
line.quad 0x00 "GICD_IROUTER133,Interrupt Routing Register 133"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6430++0x07
line.quad 0x00 "GICD_IROUTER134,Interrupt Routing Register 134"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6438++0x07
line.quad 0x00 "GICD_IROUTER135,Interrupt Routing Register 135"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6440++0x07
line.quad 0x00 "GICD_IROUTER136,Interrupt Routing Register 136"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6448++0x07
line.quad 0x00 "GICD_IROUTER137,Interrupt Routing Register 137"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6450++0x07
line.quad 0x00 "GICD_IROUTER138,Interrupt Routing Register 138"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6458++0x07
line.quad 0x00 "GICD_IROUTER139,Interrupt Routing Register 139"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6460++0x07
line.quad 0x00 "GICD_IROUTER140,Interrupt Routing Register 140"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6468++0x07
line.quad 0x00 "GICD_IROUTER141,Interrupt Routing Register 141"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6470++0x07
line.quad 0x00 "GICD_IROUTER142,Interrupt Routing Register 142"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6478++0x07
line.quad 0x00 "GICD_IROUTER143,Interrupt Routing Register 143"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6480++0x07
line.quad 0x00 "GICD_IROUTER144,Interrupt Routing Register 144"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6488++0x07
line.quad 0x00 "GICD_IROUTER145,Interrupt Routing Register 145"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6490++0x07
line.quad 0x00 "GICD_IROUTER146,Interrupt Routing Register 146"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6498++0x07
line.quad 0x00 "GICD_IROUTER147,Interrupt Routing Register 147"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64A0++0x07
line.quad 0x00 "GICD_IROUTER148,Interrupt Routing Register 148"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64A8++0x07
line.quad 0x00 "GICD_IROUTER149,Interrupt Routing Register 149"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64B0++0x07
line.quad 0x00 "GICD_IROUTER150,Interrupt Routing Register 150"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64B8++0x07
line.quad 0x00 "GICD_IROUTER151,Interrupt Routing Register 151"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64C0++0x07
line.quad 0x00 "GICD_IROUTER152,Interrupt Routing Register 152"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64C8++0x07
line.quad 0x00 "GICD_IROUTER153,Interrupt Routing Register 153"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64D0++0x07
line.quad 0x00 "GICD_IROUTER154,Interrupt Routing Register 154"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64D8++0x07
line.quad 0x00 "GICD_IROUTER155,Interrupt Routing Register 155"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64E0++0x07
line.quad 0x00 "GICD_IROUTER156,Interrupt Routing Register 156"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64E8++0x07
line.quad 0x00 "GICD_IROUTER157,Interrupt Routing Register 157"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64F0++0x07
line.quad 0x00 "GICD_IROUTER158,Interrupt Routing Register 158"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x64F8++0x07
line.quad 0x00 "GICD_IROUTER159,Interrupt Routing Register 159"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6500++0x07
line.quad 0x00 "GICD_IROUTER160,Interrupt Routing Register 160"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6508++0x07
line.quad 0x00 "GICD_IROUTER161,Interrupt Routing Register 161"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6510++0x07
line.quad 0x00 "GICD_IROUTER162,Interrupt Routing Register 162"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6518++0x07
line.quad 0x00 "GICD_IROUTER163,Interrupt Routing Register 163"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6520++0x07
line.quad 0x00 "GICD_IROUTER164,Interrupt Routing Register 164"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6528++0x07
line.quad 0x00 "GICD_IROUTER165,Interrupt Routing Register 165"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6530++0x07
line.quad 0x00 "GICD_IROUTER166,Interrupt Routing Register 166"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6538++0x07
line.quad 0x00 "GICD_IROUTER167,Interrupt Routing Register 167"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6540++0x07
line.quad 0x00 "GICD_IROUTER168,Interrupt Routing Register 168"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6548++0x07
line.quad 0x00 "GICD_IROUTER169,Interrupt Routing Register 169"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6550++0x07
line.quad 0x00 "GICD_IROUTER170,Interrupt Routing Register 170"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6558++0x07
line.quad 0x00 "GICD_IROUTER171,Interrupt Routing Register 171"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6560++0x07
line.quad 0x00 "GICD_IROUTER172,Interrupt Routing Register 172"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6568++0x07
line.quad 0x00 "GICD_IROUTER173,Interrupt Routing Register 173"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6570++0x07
line.quad 0x00 "GICD_IROUTER174,Interrupt Routing Register 174"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6578++0x07
line.quad 0x00 "GICD_IROUTER175,Interrupt Routing Register 175"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6580++0x07
line.quad 0x00 "GICD_IROUTER176,Interrupt Routing Register 176"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6588++0x07
line.quad 0x00 "GICD_IROUTER177,Interrupt Routing Register 177"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6590++0x07
line.quad 0x00 "GICD_IROUTER178,Interrupt Routing Register 178"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6598++0x07
line.quad 0x00 "GICD_IROUTER179,Interrupt Routing Register 179"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65A0++0x07
line.quad 0x00 "GICD_IROUTER180,Interrupt Routing Register 180"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65A8++0x07
line.quad 0x00 "GICD_IROUTER181,Interrupt Routing Register 181"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65B0++0x07
line.quad 0x00 "GICD_IROUTER182,Interrupt Routing Register 182"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65B8++0x07
line.quad 0x00 "GICD_IROUTER183,Interrupt Routing Register 183"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65C0++0x07
line.quad 0x00 "GICD_IROUTER184,Interrupt Routing Register 184"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65C8++0x07
line.quad 0x00 "GICD_IROUTER185,Interrupt Routing Register 185"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65D0++0x07
line.quad 0x00 "GICD_IROUTER186,Interrupt Routing Register 186"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65D8++0x07
line.quad 0x00 "GICD_IROUTER187,Interrupt Routing Register 187"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65E0++0x07
line.quad 0x00 "GICD_IROUTER188,Interrupt Routing Register 188"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65E8++0x07
line.quad 0x00 "GICD_IROUTER189,Interrupt Routing Register 189"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65F0++0x07
line.quad 0x00 "GICD_IROUTER190,Interrupt Routing Register 190"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x65F8++0x07
line.quad 0x00 "GICD_IROUTER191,Interrupt Routing Register 191"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6600++0x07
line.quad 0x00 "GICD_IROUTER192,Interrupt Routing Register 192"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6608++0x07
line.quad 0x00 "GICD_IROUTER193,Interrupt Routing Register 193"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6610++0x07
line.quad 0x00 "GICD_IROUTER194,Interrupt Routing Register 194"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6618++0x07
line.quad 0x00 "GICD_IROUTER195,Interrupt Routing Register 195"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6620++0x07
line.quad 0x00 "GICD_IROUTER196,Interrupt Routing Register 196"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6628++0x07
line.quad 0x00 "GICD_IROUTER197,Interrupt Routing Register 197"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6630++0x07
line.quad 0x00 "GICD_IROUTER198,Interrupt Routing Register 198"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6638++0x07
line.quad 0x00 "GICD_IROUTER199,Interrupt Routing Register 199"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6640++0x07
line.quad 0x00 "GICD_IROUTER200,Interrupt Routing Register 200"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6648++0x07
line.quad 0x00 "GICD_IROUTER201,Interrupt Routing Register 201"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6650++0x07
line.quad 0x00 "GICD_IROUTER202,Interrupt Routing Register 202"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6658++0x07
line.quad 0x00 "GICD_IROUTER203,Interrupt Routing Register 203"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6660++0x07
line.quad 0x00 "GICD_IROUTER204,Interrupt Routing Register 204"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6668++0x07
line.quad 0x00 "GICD_IROUTER205,Interrupt Routing Register 205"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6670++0x07
line.quad 0x00 "GICD_IROUTER206,Interrupt Routing Register 206"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6678++0x07
line.quad 0x00 "GICD_IROUTER207,Interrupt Routing Register 207"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6680++0x07
line.quad 0x00 "GICD_IROUTER208,Interrupt Routing Register 208"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6688++0x07
line.quad 0x00 "GICD_IROUTER209,Interrupt Routing Register 209"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6690++0x07
line.quad 0x00 "GICD_IROUTER210,Interrupt Routing Register 210"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6698++0x07
line.quad 0x00 "GICD_IROUTER211,Interrupt Routing Register 211"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66A0++0x07
line.quad 0x00 "GICD_IROUTER212,Interrupt Routing Register 212"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66A8++0x07
line.quad 0x00 "GICD_IROUTER213,Interrupt Routing Register 213"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66B0++0x07
line.quad 0x00 "GICD_IROUTER214,Interrupt Routing Register 214"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66B8++0x07
line.quad 0x00 "GICD_IROUTER215,Interrupt Routing Register 215"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66C0++0x07
line.quad 0x00 "GICD_IROUTER216,Interrupt Routing Register 216"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66C8++0x07
line.quad 0x00 "GICD_IROUTER217,Interrupt Routing Register 217"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66D0++0x07
line.quad 0x00 "GICD_IROUTER218,Interrupt Routing Register 218"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66D8++0x07
line.quad 0x00 "GICD_IROUTER219,Interrupt Routing Register 219"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66E0++0x07
line.quad 0x00 "GICD_IROUTER220,Interrupt Routing Register 220"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66E8++0x07
line.quad 0x00 "GICD_IROUTER221,Interrupt Routing Register 221"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66F0++0x07
line.quad 0x00 "GICD_IROUTER222,Interrupt Routing Register 222"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x66F8++0x07
line.quad 0x00 "GICD_IROUTER223,Interrupt Routing Register 223"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6700++0x07
line.quad 0x00 "GICD_IROUTER224,Interrupt Routing Register 224"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6708++0x07
line.quad 0x00 "GICD_IROUTER225,Interrupt Routing Register 225"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6710++0x07
line.quad 0x00 "GICD_IROUTER226,Interrupt Routing Register 226"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6718++0x07
line.quad 0x00 "GICD_IROUTER227,Interrupt Routing Register 227"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6720++0x07
line.quad 0x00 "GICD_IROUTER228,Interrupt Routing Register 228"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6728++0x07
line.quad 0x00 "GICD_IROUTER229,Interrupt Routing Register 229"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6730++0x07
line.quad 0x00 "GICD_IROUTER230,Interrupt Routing Register 230"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6738++0x07
line.quad 0x00 "GICD_IROUTER231,Interrupt Routing Register 231"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6740++0x07
line.quad 0x00 "GICD_IROUTER232,Interrupt Routing Register 232"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6748++0x07
line.quad 0x00 "GICD_IROUTER233,Interrupt Routing Register 233"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6750++0x07
line.quad 0x00 "GICD_IROUTER234,Interrupt Routing Register 234"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6758++0x07
line.quad 0x00 "GICD_IROUTER235,Interrupt Routing Register 235"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6760++0x07
line.quad 0x00 "GICD_IROUTER236,Interrupt Routing Register 236"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6768++0x07
line.quad 0x00 "GICD_IROUTER237,Interrupt Routing Register 237"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6770++0x07
line.quad 0x00 "GICD_IROUTER238,Interrupt Routing Register 238"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6778++0x07
line.quad 0x00 "GICD_IROUTER239,Interrupt Routing Register 239"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6780++0x07
line.quad 0x00 "GICD_IROUTER240,Interrupt Routing Register 240"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6788++0x07
line.quad 0x00 "GICD_IROUTER241,Interrupt Routing Register 241"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6790++0x07
line.quad 0x00 "GICD_IROUTER242,Interrupt Routing Register 242"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6798++0x07
line.quad 0x00 "GICD_IROUTER243,Interrupt Routing Register 243"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67A0++0x07
line.quad 0x00 "GICD_IROUTER244,Interrupt Routing Register 244"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67A8++0x07
line.quad 0x00 "GICD_IROUTER245,Interrupt Routing Register 245"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67B0++0x07
line.quad 0x00 "GICD_IROUTER246,Interrupt Routing Register 246"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67B8++0x07
line.quad 0x00 "GICD_IROUTER247,Interrupt Routing Register 247"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67C0++0x07
line.quad 0x00 "GICD_IROUTER248,Interrupt Routing Register 248"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67C8++0x07
line.quad 0x00 "GICD_IROUTER249,Interrupt Routing Register 249"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67D0++0x07
line.quad 0x00 "GICD_IROUTER250,Interrupt Routing Register 250"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67D8++0x07
line.quad 0x00 "GICD_IROUTER251,Interrupt Routing Register 251"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67E0++0x07
line.quad 0x00 "GICD_IROUTER252,Interrupt Routing Register 252"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67E8++0x07
line.quad 0x00 "GICD_IROUTER253,Interrupt Routing Register 253"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67F0++0x07
line.quad 0x00 "GICD_IROUTER254,Interrupt Routing Register 254"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x67F8++0x07
line.quad 0x00 "GICD_IROUTER255,Interrupt Routing Register 255"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6800++0x07
line.quad 0x00 "GICD_IROUTER256,Interrupt Routing Register 256"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6808++0x07
line.quad 0x00 "GICD_IROUTER257,Interrupt Routing Register 257"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6810++0x07
line.quad 0x00 "GICD_IROUTER258,Interrupt Routing Register 258"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6818++0x07
line.quad 0x00 "GICD_IROUTER259,Interrupt Routing Register 259"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6820++0x07
line.quad 0x00 "GICD_IROUTER260,Interrupt Routing Register 260"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6828++0x07
line.quad 0x00 "GICD_IROUTER261,Interrupt Routing Register 261"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6830++0x07
line.quad 0x00 "GICD_IROUTER262,Interrupt Routing Register 262"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6838++0x07
line.quad 0x00 "GICD_IROUTER263,Interrupt Routing Register 263"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6840++0x07
line.quad 0x00 "GICD_IROUTER264,Interrupt Routing Register 264"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6848++0x07
line.quad 0x00 "GICD_IROUTER265,Interrupt Routing Register 265"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6850++0x07
line.quad 0x00 "GICD_IROUTER266,Interrupt Routing Register 266"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6858++0x07
line.quad 0x00 "GICD_IROUTER267,Interrupt Routing Register 267"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6860++0x07
line.quad 0x00 "GICD_IROUTER268,Interrupt Routing Register 268"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6868++0x07
line.quad 0x00 "GICD_IROUTER269,Interrupt Routing Register 269"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6870++0x07
line.quad 0x00 "GICD_IROUTER270,Interrupt Routing Register 270"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6878++0x07
line.quad 0x00 "GICD_IROUTER271,Interrupt Routing Register 271"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6880++0x07
line.quad 0x00 "GICD_IROUTER272,Interrupt Routing Register 272"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6888++0x07
line.quad 0x00 "GICD_IROUTER273,Interrupt Routing Register 273"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6890++0x07
line.quad 0x00 "GICD_IROUTER274,Interrupt Routing Register 274"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6898++0x07
line.quad 0x00 "GICD_IROUTER275,Interrupt Routing Register 275"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68A0++0x07
line.quad 0x00 "GICD_IROUTER276,Interrupt Routing Register 276"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68A8++0x07
line.quad 0x00 "GICD_IROUTER277,Interrupt Routing Register 277"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68B0++0x07
line.quad 0x00 "GICD_IROUTER278,Interrupt Routing Register 278"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68B8++0x07
line.quad 0x00 "GICD_IROUTER279,Interrupt Routing Register 279"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68C0++0x07
line.quad 0x00 "GICD_IROUTER280,Interrupt Routing Register 280"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68C8++0x07
line.quad 0x00 "GICD_IROUTER281,Interrupt Routing Register 281"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68D0++0x07
line.quad 0x00 "GICD_IROUTER282,Interrupt Routing Register 282"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68D8++0x07
line.quad 0x00 "GICD_IROUTER283,Interrupt Routing Register 283"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68E0++0x07
line.quad 0x00 "GICD_IROUTER284,Interrupt Routing Register 284"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68E8++0x07
line.quad 0x00 "GICD_IROUTER285,Interrupt Routing Register 285"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68F0++0x07
line.quad 0x00 "GICD_IROUTER286,Interrupt Routing Register 286"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x68F8++0x07
line.quad 0x00 "GICD_IROUTER287,Interrupt Routing Register 287"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6900++0x07
line.quad 0x00 "GICD_IROUTER288,Interrupt Routing Register 288"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6908++0x07
line.quad 0x00 "GICD_IROUTER289,Interrupt Routing Register 289"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6910++0x07
line.quad 0x00 "GICD_IROUTER290,Interrupt Routing Register 290"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6918++0x07
line.quad 0x00 "GICD_IROUTER291,Interrupt Routing Register 291"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6920++0x07
line.quad 0x00 "GICD_IROUTER292,Interrupt Routing Register 292"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6928++0x07
line.quad 0x00 "GICD_IROUTER293,Interrupt Routing Register 293"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6930++0x07
line.quad 0x00 "GICD_IROUTER294,Interrupt Routing Register 294"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6938++0x07
line.quad 0x00 "GICD_IROUTER295,Interrupt Routing Register 295"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6940++0x07
line.quad 0x00 "GICD_IROUTER296,Interrupt Routing Register 296"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6948++0x07
line.quad 0x00 "GICD_IROUTER297,Interrupt Routing Register 297"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6950++0x07
line.quad 0x00 "GICD_IROUTER298,Interrupt Routing Register 298"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6958++0x07
line.quad 0x00 "GICD_IROUTER299,Interrupt Routing Register 299"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6960++0x07
line.quad 0x00 "GICD_IROUTER300,Interrupt Routing Register 300"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6968++0x07
line.quad 0x00 "GICD_IROUTER301,Interrupt Routing Register 301"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6970++0x07
line.quad 0x00 "GICD_IROUTER302,Interrupt Routing Register 302"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6978++0x07
line.quad 0x00 "GICD_IROUTER303,Interrupt Routing Register 303"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6980++0x07
line.quad 0x00 "GICD_IROUTER304,Interrupt Routing Register 304"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6988++0x07
line.quad 0x00 "GICD_IROUTER305,Interrupt Routing Register 305"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6990++0x07
line.quad 0x00 "GICD_IROUTER306,Interrupt Routing Register 306"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6998++0x07
line.quad 0x00 "GICD_IROUTER307,Interrupt Routing Register 307"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69A0++0x07
line.quad 0x00 "GICD_IROUTER308,Interrupt Routing Register 308"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69A8++0x07
line.quad 0x00 "GICD_IROUTER309,Interrupt Routing Register 309"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69B0++0x07
line.quad 0x00 "GICD_IROUTER310,Interrupt Routing Register 310"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69B8++0x07
line.quad 0x00 "GICD_IROUTER311,Interrupt Routing Register 311"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69C0++0x07
line.quad 0x00 "GICD_IROUTER312,Interrupt Routing Register 312"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69C8++0x07
line.quad 0x00 "GICD_IROUTER313,Interrupt Routing Register 313"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69D0++0x07
line.quad 0x00 "GICD_IROUTER314,Interrupt Routing Register 314"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69D8++0x07
line.quad 0x00 "GICD_IROUTER315,Interrupt Routing Register 315"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69E0++0x07
line.quad 0x00 "GICD_IROUTER316,Interrupt Routing Register 316"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69E8++0x07
line.quad 0x00 "GICD_IROUTER317,Interrupt Routing Register 317"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69F0++0x07
line.quad 0x00 "GICD_IROUTER318,Interrupt Routing Register 318"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x69F8++0x07
line.quad 0x00 "GICD_IROUTER319,Interrupt Routing Register 319"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A00++0x07
line.quad 0x00 "GICD_IROUTER320,Interrupt Routing Register 320"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A08++0x07
line.quad 0x00 "GICD_IROUTER321,Interrupt Routing Register 321"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A10++0x07
line.quad 0x00 "GICD_IROUTER322,Interrupt Routing Register 322"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A18++0x07
line.quad 0x00 "GICD_IROUTER323,Interrupt Routing Register 323"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A20++0x07
line.quad 0x00 "GICD_IROUTER324,Interrupt Routing Register 324"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A28++0x07
line.quad 0x00 "GICD_IROUTER325,Interrupt Routing Register 325"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A30++0x07
line.quad 0x00 "GICD_IROUTER326,Interrupt Routing Register 326"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A38++0x07
line.quad 0x00 "GICD_IROUTER327,Interrupt Routing Register 327"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A40++0x07
line.quad 0x00 "GICD_IROUTER328,Interrupt Routing Register 328"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A48++0x07
line.quad 0x00 "GICD_IROUTER329,Interrupt Routing Register 329"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A50++0x07
line.quad 0x00 "GICD_IROUTER330,Interrupt Routing Register 330"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A58++0x07
line.quad 0x00 "GICD_IROUTER331,Interrupt Routing Register 331"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A60++0x07
line.quad 0x00 "GICD_IROUTER332,Interrupt Routing Register 332"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A68++0x07
line.quad 0x00 "GICD_IROUTER333,Interrupt Routing Register 333"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A70++0x07
line.quad 0x00 "GICD_IROUTER334,Interrupt Routing Register 334"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A78++0x07
line.quad 0x00 "GICD_IROUTER335,Interrupt Routing Register 335"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A80++0x07
line.quad 0x00 "GICD_IROUTER336,Interrupt Routing Register 336"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A88++0x07
line.quad 0x00 "GICD_IROUTER337,Interrupt Routing Register 337"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A90++0x07
line.quad 0x00 "GICD_IROUTER338,Interrupt Routing Register 338"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6A98++0x07
line.quad 0x00 "GICD_IROUTER339,Interrupt Routing Register 339"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AA0++0x07
line.quad 0x00 "GICD_IROUTER340,Interrupt Routing Register 340"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AA8++0x07
line.quad 0x00 "GICD_IROUTER341,Interrupt Routing Register 341"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AB0++0x07
line.quad 0x00 "GICD_IROUTER342,Interrupt Routing Register 342"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AB8++0x07
line.quad 0x00 "GICD_IROUTER343,Interrupt Routing Register 343"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AC0++0x07
line.quad 0x00 "GICD_IROUTER344,Interrupt Routing Register 344"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AC8++0x07
line.quad 0x00 "GICD_IROUTER345,Interrupt Routing Register 345"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AD0++0x07
line.quad 0x00 "GICD_IROUTER346,Interrupt Routing Register 346"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AD8++0x07
line.quad 0x00 "GICD_IROUTER347,Interrupt Routing Register 347"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AE0++0x07
line.quad 0x00 "GICD_IROUTER348,Interrupt Routing Register 348"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AE8++0x07
line.quad 0x00 "GICD_IROUTER349,Interrupt Routing Register 349"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AF0++0x07
line.quad 0x00 "GICD_IROUTER350,Interrupt Routing Register 350"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6AF8++0x07
line.quad 0x00 "GICD_IROUTER351,Interrupt Routing Register 351"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B00++0x07
line.quad 0x00 "GICD_IROUTER352,Interrupt Routing Register 352"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B08++0x07
line.quad 0x00 "GICD_IROUTER353,Interrupt Routing Register 353"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B10++0x07
line.quad 0x00 "GICD_IROUTER354,Interrupt Routing Register 354"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B18++0x07
line.quad 0x00 "GICD_IROUTER355,Interrupt Routing Register 355"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B20++0x07
line.quad 0x00 "GICD_IROUTER356,Interrupt Routing Register 356"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B28++0x07
line.quad 0x00 "GICD_IROUTER357,Interrupt Routing Register 357"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B30++0x07
line.quad 0x00 "GICD_IROUTER358,Interrupt Routing Register 358"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B38++0x07
line.quad 0x00 "GICD_IROUTER359,Interrupt Routing Register 359"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B40++0x07
line.quad 0x00 "GICD_IROUTER360,Interrupt Routing Register 360"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B48++0x07
line.quad 0x00 "GICD_IROUTER361,Interrupt Routing Register 361"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B50++0x07
line.quad 0x00 "GICD_IROUTER362,Interrupt Routing Register 362"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B58++0x07
line.quad 0x00 "GICD_IROUTER363,Interrupt Routing Register 363"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B60++0x07
line.quad 0x00 "GICD_IROUTER364,Interrupt Routing Register 364"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B68++0x07
line.quad 0x00 "GICD_IROUTER365,Interrupt Routing Register 365"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B70++0x07
line.quad 0x00 "GICD_IROUTER366,Interrupt Routing Register 366"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B78++0x07
line.quad 0x00 "GICD_IROUTER367,Interrupt Routing Register 367"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B80++0x07
line.quad 0x00 "GICD_IROUTER368,Interrupt Routing Register 368"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B88++0x07
line.quad 0x00 "GICD_IROUTER369,Interrupt Routing Register 369"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B90++0x07
line.quad 0x00 "GICD_IROUTER370,Interrupt Routing Register 370"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6B98++0x07
line.quad 0x00 "GICD_IROUTER371,Interrupt Routing Register 371"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BA0++0x07
line.quad 0x00 "GICD_IROUTER372,Interrupt Routing Register 372"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BA8++0x07
line.quad 0x00 "GICD_IROUTER373,Interrupt Routing Register 373"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BB0++0x07
line.quad 0x00 "GICD_IROUTER374,Interrupt Routing Register 374"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BB8++0x07
line.quad 0x00 "GICD_IROUTER375,Interrupt Routing Register 375"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BC0++0x07
line.quad 0x00 "GICD_IROUTER376,Interrupt Routing Register 376"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BC8++0x07
line.quad 0x00 "GICD_IROUTER377,Interrupt Routing Register 377"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BD0++0x07
line.quad 0x00 "GICD_IROUTER378,Interrupt Routing Register 378"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BD8++0x07
line.quad 0x00 "GICD_IROUTER379,Interrupt Routing Register 379"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BE0++0x07
line.quad 0x00 "GICD_IROUTER380,Interrupt Routing Register 380"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BE8++0x07
line.quad 0x00 "GICD_IROUTER381,Interrupt Routing Register 381"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BF0++0x07
line.quad 0x00 "GICD_IROUTER382,Interrupt Routing Register 382"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6BF8++0x07
line.quad 0x00 "GICD_IROUTER383,Interrupt Routing Register 383"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C00++0x07
line.quad 0x00 "GICD_IROUTER384,Interrupt Routing Register 384"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C08++0x07
line.quad 0x00 "GICD_IROUTER385,Interrupt Routing Register 385"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C10++0x07
line.quad 0x00 "GICD_IROUTER386,Interrupt Routing Register 386"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C18++0x07
line.quad 0x00 "GICD_IROUTER387,Interrupt Routing Register 387"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C20++0x07
line.quad 0x00 "GICD_IROUTER388,Interrupt Routing Register 388"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C28++0x07
line.quad 0x00 "GICD_IROUTER389,Interrupt Routing Register 389"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C30++0x07
line.quad 0x00 "GICD_IROUTER390,Interrupt Routing Register 390"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C38++0x07
line.quad 0x00 "GICD_IROUTER391,Interrupt Routing Register 391"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C40++0x07
line.quad 0x00 "GICD_IROUTER392,Interrupt Routing Register 392"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C48++0x07
line.quad 0x00 "GICD_IROUTER393,Interrupt Routing Register 393"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C50++0x07
line.quad 0x00 "GICD_IROUTER394,Interrupt Routing Register 394"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C58++0x07
line.quad 0x00 "GICD_IROUTER395,Interrupt Routing Register 395"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C60++0x07
line.quad 0x00 "GICD_IROUTER396,Interrupt Routing Register 396"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C68++0x07
line.quad 0x00 "GICD_IROUTER397,Interrupt Routing Register 397"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C70++0x07
line.quad 0x00 "GICD_IROUTER398,Interrupt Routing Register 398"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C78++0x07
line.quad 0x00 "GICD_IROUTER399,Interrupt Routing Register 399"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C80++0x07
line.quad 0x00 "GICD_IROUTER400,Interrupt Routing Register 400"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C88++0x07
line.quad 0x00 "GICD_IROUTER401,Interrupt Routing Register 401"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C90++0x07
line.quad 0x00 "GICD_IROUTER402,Interrupt Routing Register 402"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6C98++0x07
line.quad 0x00 "GICD_IROUTER403,Interrupt Routing Register 403"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CA0++0x07
line.quad 0x00 "GICD_IROUTER404,Interrupt Routing Register 404"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CA8++0x07
line.quad 0x00 "GICD_IROUTER405,Interrupt Routing Register 405"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CB0++0x07
line.quad 0x00 "GICD_IROUTER406,Interrupt Routing Register 406"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CB8++0x07
line.quad 0x00 "GICD_IROUTER407,Interrupt Routing Register 407"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CC0++0x07
line.quad 0x00 "GICD_IROUTER408,Interrupt Routing Register 408"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CC8++0x07
line.quad 0x00 "GICD_IROUTER409,Interrupt Routing Register 409"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CD0++0x07
line.quad 0x00 "GICD_IROUTER410,Interrupt Routing Register 410"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CD8++0x07
line.quad 0x00 "GICD_IROUTER411,Interrupt Routing Register 411"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CE0++0x07
line.quad 0x00 "GICD_IROUTER412,Interrupt Routing Register 412"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CE8++0x07
line.quad 0x00 "GICD_IROUTER413,Interrupt Routing Register 413"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CF0++0x07
line.quad 0x00 "GICD_IROUTER414,Interrupt Routing Register 414"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6CF8++0x07
line.quad 0x00 "GICD_IROUTER415,Interrupt Routing Register 415"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D00++0x07
line.quad 0x00 "GICD_IROUTER416,Interrupt Routing Register 416"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D08++0x07
line.quad 0x00 "GICD_IROUTER417,Interrupt Routing Register 417"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D10++0x07
line.quad 0x00 "GICD_IROUTER418,Interrupt Routing Register 418"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D18++0x07
line.quad 0x00 "GICD_IROUTER419,Interrupt Routing Register 419"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D20++0x07
line.quad 0x00 "GICD_IROUTER420,Interrupt Routing Register 420"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D28++0x07
line.quad 0x00 "GICD_IROUTER421,Interrupt Routing Register 421"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D30++0x07
line.quad 0x00 "GICD_IROUTER422,Interrupt Routing Register 422"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D38++0x07
line.quad 0x00 "GICD_IROUTER423,Interrupt Routing Register 423"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D40++0x07
line.quad 0x00 "GICD_IROUTER424,Interrupt Routing Register 424"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D48++0x07
line.quad 0x00 "GICD_IROUTER425,Interrupt Routing Register 425"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D50++0x07
line.quad 0x00 "GICD_IROUTER426,Interrupt Routing Register 426"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D58++0x07
line.quad 0x00 "GICD_IROUTER427,Interrupt Routing Register 427"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D60++0x07
line.quad 0x00 "GICD_IROUTER428,Interrupt Routing Register 428"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D68++0x07
line.quad 0x00 "GICD_IROUTER429,Interrupt Routing Register 429"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D70++0x07
line.quad 0x00 "GICD_IROUTER430,Interrupt Routing Register 430"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D78++0x07
line.quad 0x00 "GICD_IROUTER431,Interrupt Routing Register 431"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D80++0x07
line.quad 0x00 "GICD_IROUTER432,Interrupt Routing Register 432"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D88++0x07
line.quad 0x00 "GICD_IROUTER433,Interrupt Routing Register 433"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D90++0x07
line.quad 0x00 "GICD_IROUTER434,Interrupt Routing Register 434"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6D98++0x07
line.quad 0x00 "GICD_IROUTER435,Interrupt Routing Register 435"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DA0++0x07
line.quad 0x00 "GICD_IROUTER436,Interrupt Routing Register 436"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DA8++0x07
line.quad 0x00 "GICD_IROUTER437,Interrupt Routing Register 437"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DB0++0x07
line.quad 0x00 "GICD_IROUTER438,Interrupt Routing Register 438"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DB8++0x07
line.quad 0x00 "GICD_IROUTER439,Interrupt Routing Register 439"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DC0++0x07
line.quad 0x00 "GICD_IROUTER440,Interrupt Routing Register 440"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DC8++0x07
line.quad 0x00 "GICD_IROUTER441,Interrupt Routing Register 441"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DD0++0x07
line.quad 0x00 "GICD_IROUTER442,Interrupt Routing Register 442"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DD8++0x07
line.quad 0x00 "GICD_IROUTER443,Interrupt Routing Register 443"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DE0++0x07
line.quad 0x00 "GICD_IROUTER444,Interrupt Routing Register 444"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DE8++0x07
line.quad 0x00 "GICD_IROUTER445,Interrupt Routing Register 445"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DF0++0x07
line.quad 0x00 "GICD_IROUTER446,Interrupt Routing Register 446"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6DF8++0x07
line.quad 0x00 "GICD_IROUTER447,Interrupt Routing Register 447"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E00++0x07
line.quad 0x00 "GICD_IROUTER448,Interrupt Routing Register 448"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E08++0x07
line.quad 0x00 "GICD_IROUTER449,Interrupt Routing Register 449"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E10++0x07
line.quad 0x00 "GICD_IROUTER450,Interrupt Routing Register 450"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E18++0x07
line.quad 0x00 "GICD_IROUTER451,Interrupt Routing Register 451"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E20++0x07
line.quad 0x00 "GICD_IROUTER452,Interrupt Routing Register 452"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E28++0x07
line.quad 0x00 "GICD_IROUTER453,Interrupt Routing Register 453"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E30++0x07
line.quad 0x00 "GICD_IROUTER454,Interrupt Routing Register 454"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E38++0x07
line.quad 0x00 "GICD_IROUTER455,Interrupt Routing Register 455"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E40++0x07
line.quad 0x00 "GICD_IROUTER456,Interrupt Routing Register 456"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E48++0x07
line.quad 0x00 "GICD_IROUTER457,Interrupt Routing Register 457"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E50++0x07
line.quad 0x00 "GICD_IROUTER458,Interrupt Routing Register 458"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E58++0x07
line.quad 0x00 "GICD_IROUTER459,Interrupt Routing Register 459"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E60++0x07
line.quad 0x00 "GICD_IROUTER460,Interrupt Routing Register 460"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E68++0x07
line.quad 0x00 "GICD_IROUTER461,Interrupt Routing Register 461"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E70++0x07
line.quad 0x00 "GICD_IROUTER462,Interrupt Routing Register 462"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E78++0x07
line.quad 0x00 "GICD_IROUTER463,Interrupt Routing Register 463"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E80++0x07
line.quad 0x00 "GICD_IROUTER464,Interrupt Routing Register 464"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E88++0x07
line.quad 0x00 "GICD_IROUTER465,Interrupt Routing Register 465"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E90++0x07
line.quad 0x00 "GICD_IROUTER466,Interrupt Routing Register 466"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6E98++0x07
line.quad 0x00 "GICD_IROUTER467,Interrupt Routing Register 467"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EA0++0x07
line.quad 0x00 "GICD_IROUTER468,Interrupt Routing Register 468"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EA8++0x07
line.quad 0x00 "GICD_IROUTER469,Interrupt Routing Register 469"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EB0++0x07
line.quad 0x00 "GICD_IROUTER470,Interrupt Routing Register 470"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EB8++0x07
line.quad 0x00 "GICD_IROUTER471,Interrupt Routing Register 471"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EC0++0x07
line.quad 0x00 "GICD_IROUTER472,Interrupt Routing Register 472"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EC8++0x07
line.quad 0x00 "GICD_IROUTER473,Interrupt Routing Register 473"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6ED0++0x07
line.quad 0x00 "GICD_IROUTER474,Interrupt Routing Register 474"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6ED8++0x07
line.quad 0x00 "GICD_IROUTER475,Interrupt Routing Register 475"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EE0++0x07
line.quad 0x00 "GICD_IROUTER476,Interrupt Routing Register 476"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EE8++0x07
line.quad 0x00 "GICD_IROUTER477,Interrupt Routing Register 477"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EF0++0x07
line.quad 0x00 "GICD_IROUTER478,Interrupt Routing Register 478"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6EF8++0x07
line.quad 0x00 "GICD_IROUTER479,Interrupt Routing Register 479"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F00++0x07
line.quad 0x00 "GICD_IROUTER480,Interrupt Routing Register 480"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F08++0x07
line.quad 0x00 "GICD_IROUTER481,Interrupt Routing Register 481"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F10++0x07
line.quad 0x00 "GICD_IROUTER482,Interrupt Routing Register 482"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F18++0x07
line.quad 0x00 "GICD_IROUTER483,Interrupt Routing Register 483"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F20++0x07
line.quad 0x00 "GICD_IROUTER484,Interrupt Routing Register 484"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F28++0x07
line.quad 0x00 "GICD_IROUTER485,Interrupt Routing Register 485"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F30++0x07
line.quad 0x00 "GICD_IROUTER486,Interrupt Routing Register 486"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F38++0x07
line.quad 0x00 "GICD_IROUTER487,Interrupt Routing Register 487"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F40++0x07
line.quad 0x00 "GICD_IROUTER488,Interrupt Routing Register 488"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F48++0x07
line.quad 0x00 "GICD_IROUTER489,Interrupt Routing Register 489"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F50++0x07
line.quad 0x00 "GICD_IROUTER490,Interrupt Routing Register 490"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F58++0x07
line.quad 0x00 "GICD_IROUTER491,Interrupt Routing Register 491"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F60++0x07
line.quad 0x00 "GICD_IROUTER492,Interrupt Routing Register 492"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F68++0x07
line.quad 0x00 "GICD_IROUTER493,Interrupt Routing Register 493"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F70++0x07
line.quad 0x00 "GICD_IROUTER494,Interrupt Routing Register 494"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F78++0x07
line.quad 0x00 "GICD_IROUTER495,Interrupt Routing Register 495"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F80++0x07
line.quad 0x00 "GICD_IROUTER496,Interrupt Routing Register 496"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F88++0x07
line.quad 0x00 "GICD_IROUTER497,Interrupt Routing Register 497"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F90++0x07
line.quad 0x00 "GICD_IROUTER498,Interrupt Routing Register 498"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6F98++0x07
line.quad 0x00 "GICD_IROUTER499,Interrupt Routing Register 499"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FA0++0x07
line.quad 0x00 "GICD_IROUTER500,Interrupt Routing Register 500"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FA8++0x07
line.quad 0x00 "GICD_IROUTER501,Interrupt Routing Register 501"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FB0++0x07
line.quad 0x00 "GICD_IROUTER502,Interrupt Routing Register 502"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FB8++0x07
line.quad 0x00 "GICD_IROUTER503,Interrupt Routing Register 503"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FC0++0x07
line.quad 0x00 "GICD_IROUTER504,Interrupt Routing Register 504"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FC8++0x07
line.quad 0x00 "GICD_IROUTER505,Interrupt Routing Register 505"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FD0++0x07
line.quad 0x00 "GICD_IROUTER506,Interrupt Routing Register 506"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FD8++0x07
line.quad 0x00 "GICD_IROUTER507,Interrupt Routing Register 507"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FE0++0x07
line.quad 0x00 "GICD_IROUTER508,Interrupt Routing Register 508"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FE8++0x07
line.quad 0x00 "GICD_IROUTER509,Interrupt Routing Register 509"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FF0++0x07
line.quad 0x00 "GICD_IROUTER510,Interrupt Routing Register 510"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x6FF8++0x07
line.quad 0x00 "GICD_IROUTER511,Interrupt Routing Register 511"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7000++0x07
line.quad 0x00 "GICD_IROUTER512,Interrupt Routing Register 512"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7008++0x07
line.quad 0x00 "GICD_IROUTER513,Interrupt Routing Register 513"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7010++0x07
line.quad 0x00 "GICD_IROUTER514,Interrupt Routing Register 514"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7018++0x07
line.quad 0x00 "GICD_IROUTER515,Interrupt Routing Register 515"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7020++0x07
line.quad 0x00 "GICD_IROUTER516,Interrupt Routing Register 516"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7028++0x07
line.quad 0x00 "GICD_IROUTER517,Interrupt Routing Register 517"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7030++0x07
line.quad 0x00 "GICD_IROUTER518,Interrupt Routing Register 518"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7038++0x07
line.quad 0x00 "GICD_IROUTER519,Interrupt Routing Register 519"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7040++0x07
line.quad 0x00 "GICD_IROUTER520,Interrupt Routing Register 520"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7048++0x07
line.quad 0x00 "GICD_IROUTER521,Interrupt Routing Register 521"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7050++0x07
line.quad 0x00 "GICD_IROUTER522,Interrupt Routing Register 522"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7058++0x07
line.quad 0x00 "GICD_IROUTER523,Interrupt Routing Register 523"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7060++0x07
line.quad 0x00 "GICD_IROUTER524,Interrupt Routing Register 524"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7068++0x07
line.quad 0x00 "GICD_IROUTER525,Interrupt Routing Register 525"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7070++0x07
line.quad 0x00 "GICD_IROUTER526,Interrupt Routing Register 526"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7078++0x07
line.quad 0x00 "GICD_IROUTER527,Interrupt Routing Register 527"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7080++0x07
line.quad 0x00 "GICD_IROUTER528,Interrupt Routing Register 528"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7088++0x07
line.quad 0x00 "GICD_IROUTER529,Interrupt Routing Register 529"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7090++0x07
line.quad 0x00 "GICD_IROUTER530,Interrupt Routing Register 530"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7098++0x07
line.quad 0x00 "GICD_IROUTER531,Interrupt Routing Register 531"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70A0++0x07
line.quad 0x00 "GICD_IROUTER532,Interrupt Routing Register 532"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70A8++0x07
line.quad 0x00 "GICD_IROUTER533,Interrupt Routing Register 533"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70B0++0x07
line.quad 0x00 "GICD_IROUTER534,Interrupt Routing Register 534"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70B8++0x07
line.quad 0x00 "GICD_IROUTER535,Interrupt Routing Register 535"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70C0++0x07
line.quad 0x00 "GICD_IROUTER536,Interrupt Routing Register 536"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70C8++0x07
line.quad 0x00 "GICD_IROUTER537,Interrupt Routing Register 537"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70D0++0x07
line.quad 0x00 "GICD_IROUTER538,Interrupt Routing Register 538"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70D8++0x07
line.quad 0x00 "GICD_IROUTER539,Interrupt Routing Register 539"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70E0++0x07
line.quad 0x00 "GICD_IROUTER540,Interrupt Routing Register 540"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70E8++0x07
line.quad 0x00 "GICD_IROUTER541,Interrupt Routing Register 541"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70F0++0x07
line.quad 0x00 "GICD_IROUTER542,Interrupt Routing Register 542"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x70F8++0x07
line.quad 0x00 "GICD_IROUTER543,Interrupt Routing Register 543"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7100++0x07
line.quad 0x00 "GICD_IROUTER544,Interrupt Routing Register 544"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7108++0x07
line.quad 0x00 "GICD_IROUTER545,Interrupt Routing Register 545"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7110++0x07
line.quad 0x00 "GICD_IROUTER546,Interrupt Routing Register 546"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7118++0x07
line.quad 0x00 "GICD_IROUTER547,Interrupt Routing Register 547"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7120++0x07
line.quad 0x00 "GICD_IROUTER548,Interrupt Routing Register 548"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7128++0x07
line.quad 0x00 "GICD_IROUTER549,Interrupt Routing Register 549"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7130++0x07
line.quad 0x00 "GICD_IROUTER550,Interrupt Routing Register 550"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7138++0x07
line.quad 0x00 "GICD_IROUTER551,Interrupt Routing Register 551"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7140++0x07
line.quad 0x00 "GICD_IROUTER552,Interrupt Routing Register 552"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7148++0x07
line.quad 0x00 "GICD_IROUTER553,Interrupt Routing Register 553"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7150++0x07
line.quad 0x00 "GICD_IROUTER554,Interrupt Routing Register 554"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7158++0x07
line.quad 0x00 "GICD_IROUTER555,Interrupt Routing Register 555"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7160++0x07
line.quad 0x00 "GICD_IROUTER556,Interrupt Routing Register 556"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7168++0x07
line.quad 0x00 "GICD_IROUTER557,Interrupt Routing Register 557"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7170++0x07
line.quad 0x00 "GICD_IROUTER558,Interrupt Routing Register 558"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7178++0x07
line.quad 0x00 "GICD_IROUTER559,Interrupt Routing Register 559"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7180++0x07
line.quad 0x00 "GICD_IROUTER560,Interrupt Routing Register 560"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7188++0x07
line.quad 0x00 "GICD_IROUTER561,Interrupt Routing Register 561"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7190++0x07
line.quad 0x00 "GICD_IROUTER562,Interrupt Routing Register 562"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7198++0x07
line.quad 0x00 "GICD_IROUTER563,Interrupt Routing Register 563"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71A0++0x07
line.quad 0x00 "GICD_IROUTER564,Interrupt Routing Register 564"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71A8++0x07
line.quad 0x00 "GICD_IROUTER565,Interrupt Routing Register 565"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71B0++0x07
line.quad 0x00 "GICD_IROUTER566,Interrupt Routing Register 566"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71B8++0x07
line.quad 0x00 "GICD_IROUTER567,Interrupt Routing Register 567"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71C0++0x07
line.quad 0x00 "GICD_IROUTER568,Interrupt Routing Register 568"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71C8++0x07
line.quad 0x00 "GICD_IROUTER569,Interrupt Routing Register 569"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71D0++0x07
line.quad 0x00 "GICD_IROUTER570,Interrupt Routing Register 570"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71D8++0x07
line.quad 0x00 "GICD_IROUTER571,Interrupt Routing Register 571"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71E0++0x07
line.quad 0x00 "GICD_IROUTER572,Interrupt Routing Register 572"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71E8++0x07
line.quad 0x00 "GICD_IROUTER573,Interrupt Routing Register 573"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71F0++0x07
line.quad 0x00 "GICD_IROUTER574,Interrupt Routing Register 574"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x71F8++0x07
line.quad 0x00 "GICD_IROUTER575,Interrupt Routing Register 575"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7200++0x07
line.quad 0x00 "GICD_IROUTER576,Interrupt Routing Register 576"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7208++0x07
line.quad 0x00 "GICD_IROUTER577,Interrupt Routing Register 577"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7210++0x07
line.quad 0x00 "GICD_IROUTER578,Interrupt Routing Register 578"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7218++0x07
line.quad 0x00 "GICD_IROUTER579,Interrupt Routing Register 579"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7220++0x07
line.quad 0x00 "GICD_IROUTER580,Interrupt Routing Register 580"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7228++0x07
line.quad 0x00 "GICD_IROUTER581,Interrupt Routing Register 581"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7230++0x07
line.quad 0x00 "GICD_IROUTER582,Interrupt Routing Register 582"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7238++0x07
line.quad 0x00 "GICD_IROUTER583,Interrupt Routing Register 583"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7240++0x07
line.quad 0x00 "GICD_IROUTER584,Interrupt Routing Register 584"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7248++0x07
line.quad 0x00 "GICD_IROUTER585,Interrupt Routing Register 585"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7250++0x07
line.quad 0x00 "GICD_IROUTER586,Interrupt Routing Register 586"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7258++0x07
line.quad 0x00 "GICD_IROUTER587,Interrupt Routing Register 587"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7260++0x07
line.quad 0x00 "GICD_IROUTER588,Interrupt Routing Register 588"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7268++0x07
line.quad 0x00 "GICD_IROUTER589,Interrupt Routing Register 589"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7270++0x07
line.quad 0x00 "GICD_IROUTER590,Interrupt Routing Register 590"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7278++0x07
line.quad 0x00 "GICD_IROUTER591,Interrupt Routing Register 591"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7280++0x07
line.quad 0x00 "GICD_IROUTER592,Interrupt Routing Register 592"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7288++0x07
line.quad 0x00 "GICD_IROUTER593,Interrupt Routing Register 593"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7290++0x07
line.quad 0x00 "GICD_IROUTER594,Interrupt Routing Register 594"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7298++0x07
line.quad 0x00 "GICD_IROUTER595,Interrupt Routing Register 595"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72A0++0x07
line.quad 0x00 "GICD_IROUTER596,Interrupt Routing Register 596"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72A8++0x07
line.quad 0x00 "GICD_IROUTER597,Interrupt Routing Register 597"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72B0++0x07
line.quad 0x00 "GICD_IROUTER598,Interrupt Routing Register 598"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72B8++0x07
line.quad 0x00 "GICD_IROUTER599,Interrupt Routing Register 599"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72C0++0x07
line.quad 0x00 "GICD_IROUTER600,Interrupt Routing Register 600"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72C8++0x07
line.quad 0x00 "GICD_IROUTER601,Interrupt Routing Register 601"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72D0++0x07
line.quad 0x00 "GICD_IROUTER602,Interrupt Routing Register 602"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72D8++0x07
line.quad 0x00 "GICD_IROUTER603,Interrupt Routing Register 603"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72E0++0x07
line.quad 0x00 "GICD_IROUTER604,Interrupt Routing Register 604"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72E8++0x07
line.quad 0x00 "GICD_IROUTER605,Interrupt Routing Register 605"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72F0++0x07
line.quad 0x00 "GICD_IROUTER606,Interrupt Routing Register 606"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x72F8++0x07
line.quad 0x00 "GICD_IROUTER607,Interrupt Routing Register 607"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7300++0x07
line.quad 0x00 "GICD_IROUTER608,Interrupt Routing Register 608"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7308++0x07
line.quad 0x00 "GICD_IROUTER609,Interrupt Routing Register 609"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7310++0x07
line.quad 0x00 "GICD_IROUTER610,Interrupt Routing Register 610"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7318++0x07
line.quad 0x00 "GICD_IROUTER611,Interrupt Routing Register 611"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7320++0x07
line.quad 0x00 "GICD_IROUTER612,Interrupt Routing Register 612"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7328++0x07
line.quad 0x00 "GICD_IROUTER613,Interrupt Routing Register 613"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7330++0x07
line.quad 0x00 "GICD_IROUTER614,Interrupt Routing Register 614"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7338++0x07
line.quad 0x00 "GICD_IROUTER615,Interrupt Routing Register 615"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7340++0x07
line.quad 0x00 "GICD_IROUTER616,Interrupt Routing Register 616"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7348++0x07
line.quad 0x00 "GICD_IROUTER617,Interrupt Routing Register 617"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7350++0x07
line.quad 0x00 "GICD_IROUTER618,Interrupt Routing Register 618"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7358++0x07
line.quad 0x00 "GICD_IROUTER619,Interrupt Routing Register 619"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7360++0x07
line.quad 0x00 "GICD_IROUTER620,Interrupt Routing Register 620"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7368++0x07
line.quad 0x00 "GICD_IROUTER621,Interrupt Routing Register 621"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7370++0x07
line.quad 0x00 "GICD_IROUTER622,Interrupt Routing Register 622"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7378++0x07
line.quad 0x00 "GICD_IROUTER623,Interrupt Routing Register 623"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7380++0x07
line.quad 0x00 "GICD_IROUTER624,Interrupt Routing Register 624"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7388++0x07
line.quad 0x00 "GICD_IROUTER625,Interrupt Routing Register 625"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7390++0x07
line.quad 0x00 "GICD_IROUTER626,Interrupt Routing Register 626"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7398++0x07
line.quad 0x00 "GICD_IROUTER627,Interrupt Routing Register 627"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73A0++0x07
line.quad 0x00 "GICD_IROUTER628,Interrupt Routing Register 628"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73A8++0x07
line.quad 0x00 "GICD_IROUTER629,Interrupt Routing Register 629"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73B0++0x07
line.quad 0x00 "GICD_IROUTER630,Interrupt Routing Register 630"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73B8++0x07
line.quad 0x00 "GICD_IROUTER631,Interrupt Routing Register 631"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73C0++0x07
line.quad 0x00 "GICD_IROUTER632,Interrupt Routing Register 632"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73C8++0x07
line.quad 0x00 "GICD_IROUTER633,Interrupt Routing Register 633"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73D0++0x07
line.quad 0x00 "GICD_IROUTER634,Interrupt Routing Register 634"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73D8++0x07
line.quad 0x00 "GICD_IROUTER635,Interrupt Routing Register 635"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73E0++0x07
line.quad 0x00 "GICD_IROUTER636,Interrupt Routing Register 636"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73E8++0x07
line.quad 0x00 "GICD_IROUTER637,Interrupt Routing Register 637"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73F0++0x07
line.quad 0x00 "GICD_IROUTER638,Interrupt Routing Register 638"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x73F8++0x07
line.quad 0x00 "GICD_IROUTER639,Interrupt Routing Register 639"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7400++0x07
line.quad 0x00 "GICD_IROUTER640,Interrupt Routing Register 640"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7408++0x07
line.quad 0x00 "GICD_IROUTER641,Interrupt Routing Register 641"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7410++0x07
line.quad 0x00 "GICD_IROUTER642,Interrupt Routing Register 642"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7418++0x07
line.quad 0x00 "GICD_IROUTER643,Interrupt Routing Register 643"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7420++0x07
line.quad 0x00 "GICD_IROUTER644,Interrupt Routing Register 644"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7428++0x07
line.quad 0x00 "GICD_IROUTER645,Interrupt Routing Register 645"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7430++0x07
line.quad 0x00 "GICD_IROUTER646,Interrupt Routing Register 646"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7438++0x07
line.quad 0x00 "GICD_IROUTER647,Interrupt Routing Register 647"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7440++0x07
line.quad 0x00 "GICD_IROUTER648,Interrupt Routing Register 648"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7448++0x07
line.quad 0x00 "GICD_IROUTER649,Interrupt Routing Register 649"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7450++0x07
line.quad 0x00 "GICD_IROUTER650,Interrupt Routing Register 650"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7458++0x07
line.quad 0x00 "GICD_IROUTER651,Interrupt Routing Register 651"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7460++0x07
line.quad 0x00 "GICD_IROUTER652,Interrupt Routing Register 652"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7468++0x07
line.quad 0x00 "GICD_IROUTER653,Interrupt Routing Register 653"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7470++0x07
line.quad 0x00 "GICD_IROUTER654,Interrupt Routing Register 654"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7478++0x07
line.quad 0x00 "GICD_IROUTER655,Interrupt Routing Register 655"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7480++0x07
line.quad 0x00 "GICD_IROUTER656,Interrupt Routing Register 656"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7488++0x07
line.quad 0x00 "GICD_IROUTER657,Interrupt Routing Register 657"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7490++0x07
line.quad 0x00 "GICD_IROUTER658,Interrupt Routing Register 658"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7498++0x07
line.quad 0x00 "GICD_IROUTER659,Interrupt Routing Register 659"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74A0++0x07
line.quad 0x00 "GICD_IROUTER660,Interrupt Routing Register 660"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74A8++0x07
line.quad 0x00 "GICD_IROUTER661,Interrupt Routing Register 661"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74B0++0x07
line.quad 0x00 "GICD_IROUTER662,Interrupt Routing Register 662"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74B8++0x07
line.quad 0x00 "GICD_IROUTER663,Interrupt Routing Register 663"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74C0++0x07
line.quad 0x00 "GICD_IROUTER664,Interrupt Routing Register 664"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74C8++0x07
line.quad 0x00 "GICD_IROUTER665,Interrupt Routing Register 665"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74D0++0x07
line.quad 0x00 "GICD_IROUTER666,Interrupt Routing Register 666"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74D8++0x07
line.quad 0x00 "GICD_IROUTER667,Interrupt Routing Register 667"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74E0++0x07
line.quad 0x00 "GICD_IROUTER668,Interrupt Routing Register 668"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74E8++0x07
line.quad 0x00 "GICD_IROUTER669,Interrupt Routing Register 669"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74F0++0x07
line.quad 0x00 "GICD_IROUTER670,Interrupt Routing Register 670"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x74F8++0x07
line.quad 0x00 "GICD_IROUTER671,Interrupt Routing Register 671"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7500++0x07
line.quad 0x00 "GICD_IROUTER672,Interrupt Routing Register 672"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7508++0x07
line.quad 0x00 "GICD_IROUTER673,Interrupt Routing Register 673"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7510++0x07
line.quad 0x00 "GICD_IROUTER674,Interrupt Routing Register 674"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7518++0x07
line.quad 0x00 "GICD_IROUTER675,Interrupt Routing Register 675"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7520++0x07
line.quad 0x00 "GICD_IROUTER676,Interrupt Routing Register 676"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7528++0x07
line.quad 0x00 "GICD_IROUTER677,Interrupt Routing Register 677"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7530++0x07
line.quad 0x00 "GICD_IROUTER678,Interrupt Routing Register 678"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7538++0x07
line.quad 0x00 "GICD_IROUTER679,Interrupt Routing Register 679"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7540++0x07
line.quad 0x00 "GICD_IROUTER680,Interrupt Routing Register 680"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7548++0x07
line.quad 0x00 "GICD_IROUTER681,Interrupt Routing Register 681"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7550++0x07
line.quad 0x00 "GICD_IROUTER682,Interrupt Routing Register 682"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7558++0x07
line.quad 0x00 "GICD_IROUTER683,Interrupt Routing Register 683"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7560++0x07
line.quad 0x00 "GICD_IROUTER684,Interrupt Routing Register 684"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7568++0x07
line.quad 0x00 "GICD_IROUTER685,Interrupt Routing Register 685"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7570++0x07
line.quad 0x00 "GICD_IROUTER686,Interrupt Routing Register 686"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7578++0x07
line.quad 0x00 "GICD_IROUTER687,Interrupt Routing Register 687"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7580++0x07
line.quad 0x00 "GICD_IROUTER688,Interrupt Routing Register 688"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7588++0x07
line.quad 0x00 "GICD_IROUTER689,Interrupt Routing Register 689"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7590++0x07
line.quad 0x00 "GICD_IROUTER690,Interrupt Routing Register 690"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7598++0x07
line.quad 0x00 "GICD_IROUTER691,Interrupt Routing Register 691"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75A0++0x07
line.quad 0x00 "GICD_IROUTER692,Interrupt Routing Register 692"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75A8++0x07
line.quad 0x00 "GICD_IROUTER693,Interrupt Routing Register 693"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75B0++0x07
line.quad 0x00 "GICD_IROUTER694,Interrupt Routing Register 694"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75B8++0x07
line.quad 0x00 "GICD_IROUTER695,Interrupt Routing Register 695"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75C0++0x07
line.quad 0x00 "GICD_IROUTER696,Interrupt Routing Register 696"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75C8++0x07
line.quad 0x00 "GICD_IROUTER697,Interrupt Routing Register 697"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75D0++0x07
line.quad 0x00 "GICD_IROUTER698,Interrupt Routing Register 698"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75D8++0x07
line.quad 0x00 "GICD_IROUTER699,Interrupt Routing Register 699"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75E0++0x07
line.quad 0x00 "GICD_IROUTER700,Interrupt Routing Register 700"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75E8++0x07
line.quad 0x00 "GICD_IROUTER701,Interrupt Routing Register 701"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75F0++0x07
line.quad 0x00 "GICD_IROUTER702,Interrupt Routing Register 702"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x75F8++0x07
line.quad 0x00 "GICD_IROUTER703,Interrupt Routing Register 703"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7600++0x07
line.quad 0x00 "GICD_IROUTER704,Interrupt Routing Register 704"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7608++0x07
line.quad 0x00 "GICD_IROUTER705,Interrupt Routing Register 705"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7610++0x07
line.quad 0x00 "GICD_IROUTER706,Interrupt Routing Register 706"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7618++0x07
line.quad 0x00 "GICD_IROUTER707,Interrupt Routing Register 707"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7620++0x07
line.quad 0x00 "GICD_IROUTER708,Interrupt Routing Register 708"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7628++0x07
line.quad 0x00 "GICD_IROUTER709,Interrupt Routing Register 709"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7630++0x07
line.quad 0x00 "GICD_IROUTER710,Interrupt Routing Register 710"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7638++0x07
line.quad 0x00 "GICD_IROUTER711,Interrupt Routing Register 711"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7640++0x07
line.quad 0x00 "GICD_IROUTER712,Interrupt Routing Register 712"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7648++0x07
line.quad 0x00 "GICD_IROUTER713,Interrupt Routing Register 713"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7650++0x07
line.quad 0x00 "GICD_IROUTER714,Interrupt Routing Register 714"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7658++0x07
line.quad 0x00 "GICD_IROUTER715,Interrupt Routing Register 715"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7660++0x07
line.quad 0x00 "GICD_IROUTER716,Interrupt Routing Register 716"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7668++0x07
line.quad 0x00 "GICD_IROUTER717,Interrupt Routing Register 717"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7670++0x07
line.quad 0x00 "GICD_IROUTER718,Interrupt Routing Register 718"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7678++0x07
line.quad 0x00 "GICD_IROUTER719,Interrupt Routing Register 719"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7680++0x07
line.quad 0x00 "GICD_IROUTER720,Interrupt Routing Register 720"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7688++0x07
line.quad 0x00 "GICD_IROUTER721,Interrupt Routing Register 721"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7690++0x07
line.quad 0x00 "GICD_IROUTER722,Interrupt Routing Register 722"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7698++0x07
line.quad 0x00 "GICD_IROUTER723,Interrupt Routing Register 723"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76A0++0x07
line.quad 0x00 "GICD_IROUTER724,Interrupt Routing Register 724"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76A8++0x07
line.quad 0x00 "GICD_IROUTER725,Interrupt Routing Register 725"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76B0++0x07
line.quad 0x00 "GICD_IROUTER726,Interrupt Routing Register 726"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76B8++0x07
line.quad 0x00 "GICD_IROUTER727,Interrupt Routing Register 727"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76C0++0x07
line.quad 0x00 "GICD_IROUTER728,Interrupt Routing Register 728"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76C8++0x07
line.quad 0x00 "GICD_IROUTER729,Interrupt Routing Register 729"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76D0++0x07
line.quad 0x00 "GICD_IROUTER730,Interrupt Routing Register 730"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76D8++0x07
line.quad 0x00 "GICD_IROUTER731,Interrupt Routing Register 731"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76E0++0x07
line.quad 0x00 "GICD_IROUTER732,Interrupt Routing Register 732"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76E8++0x07
line.quad 0x00 "GICD_IROUTER733,Interrupt Routing Register 733"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76F0++0x07
line.quad 0x00 "GICD_IROUTER734,Interrupt Routing Register 734"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x76F8++0x07
line.quad 0x00 "GICD_IROUTER735,Interrupt Routing Register 735"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7700++0x07
line.quad 0x00 "GICD_IROUTER736,Interrupt Routing Register 736"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7708++0x07
line.quad 0x00 "GICD_IROUTER737,Interrupt Routing Register 737"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7710++0x07
line.quad 0x00 "GICD_IROUTER738,Interrupt Routing Register 738"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7718++0x07
line.quad 0x00 "GICD_IROUTER739,Interrupt Routing Register 739"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7720++0x07
line.quad 0x00 "GICD_IROUTER740,Interrupt Routing Register 740"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7728++0x07
line.quad 0x00 "GICD_IROUTER741,Interrupt Routing Register 741"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7730++0x07
line.quad 0x00 "GICD_IROUTER742,Interrupt Routing Register 742"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7738++0x07
line.quad 0x00 "GICD_IROUTER743,Interrupt Routing Register 743"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7740++0x07
line.quad 0x00 "GICD_IROUTER744,Interrupt Routing Register 744"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7748++0x07
line.quad 0x00 "GICD_IROUTER745,Interrupt Routing Register 745"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7750++0x07
line.quad 0x00 "GICD_IROUTER746,Interrupt Routing Register 746"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7758++0x07
line.quad 0x00 "GICD_IROUTER747,Interrupt Routing Register 747"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7760++0x07
line.quad 0x00 "GICD_IROUTER748,Interrupt Routing Register 748"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7768++0x07
line.quad 0x00 "GICD_IROUTER749,Interrupt Routing Register 749"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7770++0x07
line.quad 0x00 "GICD_IROUTER750,Interrupt Routing Register 750"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7778++0x07
line.quad 0x00 "GICD_IROUTER751,Interrupt Routing Register 751"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7780++0x07
line.quad 0x00 "GICD_IROUTER752,Interrupt Routing Register 752"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7788++0x07
line.quad 0x00 "GICD_IROUTER753,Interrupt Routing Register 753"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7790++0x07
line.quad 0x00 "GICD_IROUTER754,Interrupt Routing Register 754"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7798++0x07
line.quad 0x00 "GICD_IROUTER755,Interrupt Routing Register 755"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77A0++0x07
line.quad 0x00 "GICD_IROUTER756,Interrupt Routing Register 756"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77A8++0x07
line.quad 0x00 "GICD_IROUTER757,Interrupt Routing Register 757"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77B0++0x07
line.quad 0x00 "GICD_IROUTER758,Interrupt Routing Register 758"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77B8++0x07
line.quad 0x00 "GICD_IROUTER759,Interrupt Routing Register 759"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77C0++0x07
line.quad 0x00 "GICD_IROUTER760,Interrupt Routing Register 760"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77C8++0x07
line.quad 0x00 "GICD_IROUTER761,Interrupt Routing Register 761"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77D0++0x07
line.quad 0x00 "GICD_IROUTER762,Interrupt Routing Register 762"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77D8++0x07
line.quad 0x00 "GICD_IROUTER763,Interrupt Routing Register 763"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77E0++0x07
line.quad 0x00 "GICD_IROUTER764,Interrupt Routing Register 764"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77E8++0x07
line.quad 0x00 "GICD_IROUTER765,Interrupt Routing Register 765"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77F0++0x07
line.quad 0x00 "GICD_IROUTER766,Interrupt Routing Register 766"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x77F8++0x07
line.quad 0x00 "GICD_IROUTER767,Interrupt Routing Register 767"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7800++0x07
line.quad 0x00 "GICD_IROUTER768,Interrupt Routing Register 768"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7808++0x07
line.quad 0x00 "GICD_IROUTER769,Interrupt Routing Register 769"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7810++0x07
line.quad 0x00 "GICD_IROUTER770,Interrupt Routing Register 770"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7818++0x07
line.quad 0x00 "GICD_IROUTER771,Interrupt Routing Register 771"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7820++0x07
line.quad 0x00 "GICD_IROUTER772,Interrupt Routing Register 772"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7828++0x07
line.quad 0x00 "GICD_IROUTER773,Interrupt Routing Register 773"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7830++0x07
line.quad 0x00 "GICD_IROUTER774,Interrupt Routing Register 774"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7838++0x07
line.quad 0x00 "GICD_IROUTER775,Interrupt Routing Register 775"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7840++0x07
line.quad 0x00 "GICD_IROUTER776,Interrupt Routing Register 776"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7848++0x07
line.quad 0x00 "GICD_IROUTER777,Interrupt Routing Register 777"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7850++0x07
line.quad 0x00 "GICD_IROUTER778,Interrupt Routing Register 778"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7858++0x07
line.quad 0x00 "GICD_IROUTER779,Interrupt Routing Register 779"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7860++0x07
line.quad 0x00 "GICD_IROUTER780,Interrupt Routing Register 780"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7868++0x07
line.quad 0x00 "GICD_IROUTER781,Interrupt Routing Register 781"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7870++0x07
line.quad 0x00 "GICD_IROUTER782,Interrupt Routing Register 782"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7878++0x07
line.quad 0x00 "GICD_IROUTER783,Interrupt Routing Register 783"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7880++0x07
line.quad 0x00 "GICD_IROUTER784,Interrupt Routing Register 784"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7888++0x07
line.quad 0x00 "GICD_IROUTER785,Interrupt Routing Register 785"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7890++0x07
line.quad 0x00 "GICD_IROUTER786,Interrupt Routing Register 786"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7898++0x07
line.quad 0x00 "GICD_IROUTER787,Interrupt Routing Register 787"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78A0++0x07
line.quad 0x00 "GICD_IROUTER788,Interrupt Routing Register 788"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78A8++0x07
line.quad 0x00 "GICD_IROUTER789,Interrupt Routing Register 789"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78B0++0x07
line.quad 0x00 "GICD_IROUTER790,Interrupt Routing Register 790"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78B8++0x07
line.quad 0x00 "GICD_IROUTER791,Interrupt Routing Register 791"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78C0++0x07
line.quad 0x00 "GICD_IROUTER792,Interrupt Routing Register 792"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78C8++0x07
line.quad 0x00 "GICD_IROUTER793,Interrupt Routing Register 793"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78D0++0x07
line.quad 0x00 "GICD_IROUTER794,Interrupt Routing Register 794"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78D8++0x07
line.quad 0x00 "GICD_IROUTER795,Interrupt Routing Register 795"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78E0++0x07
line.quad 0x00 "GICD_IROUTER796,Interrupt Routing Register 796"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78E8++0x07
line.quad 0x00 "GICD_IROUTER797,Interrupt Routing Register 797"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78F0++0x07
line.quad 0x00 "GICD_IROUTER798,Interrupt Routing Register 798"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x78F8++0x07
line.quad 0x00 "GICD_IROUTER799,Interrupt Routing Register 799"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7900++0x07
line.quad 0x00 "GICD_IROUTER800,Interrupt Routing Register 800"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7908++0x07
line.quad 0x00 "GICD_IROUTER801,Interrupt Routing Register 801"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7910++0x07
line.quad 0x00 "GICD_IROUTER802,Interrupt Routing Register 802"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7918++0x07
line.quad 0x00 "GICD_IROUTER803,Interrupt Routing Register 803"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7920++0x07
line.quad 0x00 "GICD_IROUTER804,Interrupt Routing Register 804"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7928++0x07
line.quad 0x00 "GICD_IROUTER805,Interrupt Routing Register 805"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7930++0x07
line.quad 0x00 "GICD_IROUTER806,Interrupt Routing Register 806"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7938++0x07
line.quad 0x00 "GICD_IROUTER807,Interrupt Routing Register 807"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7940++0x07
line.quad 0x00 "GICD_IROUTER808,Interrupt Routing Register 808"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7948++0x07
line.quad 0x00 "GICD_IROUTER809,Interrupt Routing Register 809"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7950++0x07
line.quad 0x00 "GICD_IROUTER810,Interrupt Routing Register 810"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7958++0x07
line.quad 0x00 "GICD_IROUTER811,Interrupt Routing Register 811"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7960++0x07
line.quad 0x00 "GICD_IROUTER812,Interrupt Routing Register 812"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7968++0x07
line.quad 0x00 "GICD_IROUTER813,Interrupt Routing Register 813"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7970++0x07
line.quad 0x00 "GICD_IROUTER814,Interrupt Routing Register 814"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7978++0x07
line.quad 0x00 "GICD_IROUTER815,Interrupt Routing Register 815"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7980++0x07
line.quad 0x00 "GICD_IROUTER816,Interrupt Routing Register 816"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7988++0x07
line.quad 0x00 "GICD_IROUTER817,Interrupt Routing Register 817"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7990++0x07
line.quad 0x00 "GICD_IROUTER818,Interrupt Routing Register 818"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7998++0x07
line.quad 0x00 "GICD_IROUTER819,Interrupt Routing Register 819"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79A0++0x07
line.quad 0x00 "GICD_IROUTER820,Interrupt Routing Register 820"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79A8++0x07
line.quad 0x00 "GICD_IROUTER821,Interrupt Routing Register 821"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79B0++0x07
line.quad 0x00 "GICD_IROUTER822,Interrupt Routing Register 822"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79B8++0x07
line.quad 0x00 "GICD_IROUTER823,Interrupt Routing Register 823"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79C0++0x07
line.quad 0x00 "GICD_IROUTER824,Interrupt Routing Register 824"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79C8++0x07
line.quad 0x00 "GICD_IROUTER825,Interrupt Routing Register 825"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79D0++0x07
line.quad 0x00 "GICD_IROUTER826,Interrupt Routing Register 826"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79D8++0x07
line.quad 0x00 "GICD_IROUTER827,Interrupt Routing Register 827"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79E0++0x07
line.quad 0x00 "GICD_IROUTER828,Interrupt Routing Register 828"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79E8++0x07
line.quad 0x00 "GICD_IROUTER829,Interrupt Routing Register 829"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79F0++0x07
line.quad 0x00 "GICD_IROUTER830,Interrupt Routing Register 830"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x79F8++0x07
line.quad 0x00 "GICD_IROUTER831,Interrupt Routing Register 831"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A00++0x07
line.quad 0x00 "GICD_IROUTER832,Interrupt Routing Register 832"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A08++0x07
line.quad 0x00 "GICD_IROUTER833,Interrupt Routing Register 833"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A10++0x07
line.quad 0x00 "GICD_IROUTER834,Interrupt Routing Register 834"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A18++0x07
line.quad 0x00 "GICD_IROUTER835,Interrupt Routing Register 835"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A20++0x07
line.quad 0x00 "GICD_IROUTER836,Interrupt Routing Register 836"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A28++0x07
line.quad 0x00 "GICD_IROUTER837,Interrupt Routing Register 837"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A30++0x07
line.quad 0x00 "GICD_IROUTER838,Interrupt Routing Register 838"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A38++0x07
line.quad 0x00 "GICD_IROUTER839,Interrupt Routing Register 839"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A40++0x07
line.quad 0x00 "GICD_IROUTER840,Interrupt Routing Register 840"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A48++0x07
line.quad 0x00 "GICD_IROUTER841,Interrupt Routing Register 841"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A50++0x07
line.quad 0x00 "GICD_IROUTER842,Interrupt Routing Register 842"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A58++0x07
line.quad 0x00 "GICD_IROUTER843,Interrupt Routing Register 843"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A60++0x07
line.quad 0x00 "GICD_IROUTER844,Interrupt Routing Register 844"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A68++0x07
line.quad 0x00 "GICD_IROUTER845,Interrupt Routing Register 845"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A70++0x07
line.quad 0x00 "GICD_IROUTER846,Interrupt Routing Register 846"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A78++0x07
line.quad 0x00 "GICD_IROUTER847,Interrupt Routing Register 847"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A80++0x07
line.quad 0x00 "GICD_IROUTER848,Interrupt Routing Register 848"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A88++0x07
line.quad 0x00 "GICD_IROUTER849,Interrupt Routing Register 849"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A90++0x07
line.quad 0x00 "GICD_IROUTER850,Interrupt Routing Register 850"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7A98++0x07
line.quad 0x00 "GICD_IROUTER851,Interrupt Routing Register 851"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AA0++0x07
line.quad 0x00 "GICD_IROUTER852,Interrupt Routing Register 852"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AA8++0x07
line.quad 0x00 "GICD_IROUTER853,Interrupt Routing Register 853"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AB0++0x07
line.quad 0x00 "GICD_IROUTER854,Interrupt Routing Register 854"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AB8++0x07
line.quad 0x00 "GICD_IROUTER855,Interrupt Routing Register 855"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AC0++0x07
line.quad 0x00 "GICD_IROUTER856,Interrupt Routing Register 856"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AC8++0x07
line.quad 0x00 "GICD_IROUTER857,Interrupt Routing Register 857"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AD0++0x07
line.quad 0x00 "GICD_IROUTER858,Interrupt Routing Register 858"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AD8++0x07
line.quad 0x00 "GICD_IROUTER859,Interrupt Routing Register 859"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AE0++0x07
line.quad 0x00 "GICD_IROUTER860,Interrupt Routing Register 860"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AE8++0x07
line.quad 0x00 "GICD_IROUTER861,Interrupt Routing Register 861"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AF0++0x07
line.quad 0x00 "GICD_IROUTER862,Interrupt Routing Register 862"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7AF8++0x07
line.quad 0x00 "GICD_IROUTER863,Interrupt Routing Register 863"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B00++0x07
line.quad 0x00 "GICD_IROUTER864,Interrupt Routing Register 864"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B08++0x07
line.quad 0x00 "GICD_IROUTER865,Interrupt Routing Register 865"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B10++0x07
line.quad 0x00 "GICD_IROUTER866,Interrupt Routing Register 866"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B18++0x07
line.quad 0x00 "GICD_IROUTER867,Interrupt Routing Register 867"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B20++0x07
line.quad 0x00 "GICD_IROUTER868,Interrupt Routing Register 868"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B28++0x07
line.quad 0x00 "GICD_IROUTER869,Interrupt Routing Register 869"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B30++0x07
line.quad 0x00 "GICD_IROUTER870,Interrupt Routing Register 870"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B38++0x07
line.quad 0x00 "GICD_IROUTER871,Interrupt Routing Register 871"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B40++0x07
line.quad 0x00 "GICD_IROUTER872,Interrupt Routing Register 872"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B48++0x07
line.quad 0x00 "GICD_IROUTER873,Interrupt Routing Register 873"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B50++0x07
line.quad 0x00 "GICD_IROUTER874,Interrupt Routing Register 874"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B58++0x07
line.quad 0x00 "GICD_IROUTER875,Interrupt Routing Register 875"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B60++0x07
line.quad 0x00 "GICD_IROUTER876,Interrupt Routing Register 876"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B68++0x07
line.quad 0x00 "GICD_IROUTER877,Interrupt Routing Register 877"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B70++0x07
line.quad 0x00 "GICD_IROUTER878,Interrupt Routing Register 878"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B78++0x07
line.quad 0x00 "GICD_IROUTER879,Interrupt Routing Register 879"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B80++0x07
line.quad 0x00 "GICD_IROUTER880,Interrupt Routing Register 880"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B88++0x07
line.quad 0x00 "GICD_IROUTER881,Interrupt Routing Register 881"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B90++0x07
line.quad 0x00 "GICD_IROUTER882,Interrupt Routing Register 882"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7B98++0x07
line.quad 0x00 "GICD_IROUTER883,Interrupt Routing Register 883"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BA0++0x07
line.quad 0x00 "GICD_IROUTER884,Interrupt Routing Register 884"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BA8++0x07
line.quad 0x00 "GICD_IROUTER885,Interrupt Routing Register 885"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BB0++0x07
line.quad 0x00 "GICD_IROUTER886,Interrupt Routing Register 886"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BB8++0x07
line.quad 0x00 "GICD_IROUTER887,Interrupt Routing Register 887"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BC0++0x07
line.quad 0x00 "GICD_IROUTER888,Interrupt Routing Register 888"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BC8++0x07
line.quad 0x00 "GICD_IROUTER889,Interrupt Routing Register 889"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BD0++0x07
line.quad 0x00 "GICD_IROUTER890,Interrupt Routing Register 890"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BD8++0x07
line.quad 0x00 "GICD_IROUTER891,Interrupt Routing Register 891"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BE0++0x07
line.quad 0x00 "GICD_IROUTER892,Interrupt Routing Register 892"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BE8++0x07
line.quad 0x00 "GICD_IROUTER893,Interrupt Routing Register 893"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BF0++0x07
line.quad 0x00 "GICD_IROUTER894,Interrupt Routing Register 894"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7BF8++0x07
line.quad 0x00 "GICD_IROUTER895,Interrupt Routing Register 895"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C00++0x07
line.quad 0x00 "GICD_IROUTER896,Interrupt Routing Register 896"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C08++0x07
line.quad 0x00 "GICD_IROUTER897,Interrupt Routing Register 897"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C10++0x07
line.quad 0x00 "GICD_IROUTER898,Interrupt Routing Register 898"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C18++0x07
line.quad 0x00 "GICD_IROUTER899,Interrupt Routing Register 899"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C20++0x07
line.quad 0x00 "GICD_IROUTER900,Interrupt Routing Register 900"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C28++0x07
line.quad 0x00 "GICD_IROUTER901,Interrupt Routing Register 901"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C30++0x07
line.quad 0x00 "GICD_IROUTER902,Interrupt Routing Register 902"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C38++0x07
line.quad 0x00 "GICD_IROUTER903,Interrupt Routing Register 903"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C40++0x07
line.quad 0x00 "GICD_IROUTER904,Interrupt Routing Register 904"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C48++0x07
line.quad 0x00 "GICD_IROUTER905,Interrupt Routing Register 905"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C50++0x07
line.quad 0x00 "GICD_IROUTER906,Interrupt Routing Register 906"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C58++0x07
line.quad 0x00 "GICD_IROUTER907,Interrupt Routing Register 907"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C60++0x07
line.quad 0x00 "GICD_IROUTER908,Interrupt Routing Register 908"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C68++0x07
line.quad 0x00 "GICD_IROUTER909,Interrupt Routing Register 909"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C70++0x07
line.quad 0x00 "GICD_IROUTER910,Interrupt Routing Register 910"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C78++0x07
line.quad 0x00 "GICD_IROUTER911,Interrupt Routing Register 911"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C80++0x07
line.quad 0x00 "GICD_IROUTER912,Interrupt Routing Register 912"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C88++0x07
line.quad 0x00 "GICD_IROUTER913,Interrupt Routing Register 913"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C90++0x07
line.quad 0x00 "GICD_IROUTER914,Interrupt Routing Register 914"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7C98++0x07
line.quad 0x00 "GICD_IROUTER915,Interrupt Routing Register 915"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CA0++0x07
line.quad 0x00 "GICD_IROUTER916,Interrupt Routing Register 916"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CA8++0x07
line.quad 0x00 "GICD_IROUTER917,Interrupt Routing Register 917"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CB0++0x07
line.quad 0x00 "GICD_IROUTER918,Interrupt Routing Register 918"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CB8++0x07
line.quad 0x00 "GICD_IROUTER919,Interrupt Routing Register 919"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CC0++0x07
line.quad 0x00 "GICD_IROUTER920,Interrupt Routing Register 920"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CC8++0x07
line.quad 0x00 "GICD_IROUTER921,Interrupt Routing Register 921"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CD0++0x07
line.quad 0x00 "GICD_IROUTER922,Interrupt Routing Register 922"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CD8++0x07
line.quad 0x00 "GICD_IROUTER923,Interrupt Routing Register 923"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CE0++0x07
line.quad 0x00 "GICD_IROUTER924,Interrupt Routing Register 924"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CE8++0x07
line.quad 0x00 "GICD_IROUTER925,Interrupt Routing Register 925"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CF0++0x07
line.quad 0x00 "GICD_IROUTER926,Interrupt Routing Register 926"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7CF8++0x07
line.quad 0x00 "GICD_IROUTER927,Interrupt Routing Register 927"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D00++0x07
line.quad 0x00 "GICD_IROUTER928,Interrupt Routing Register 928"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D08++0x07
line.quad 0x00 "GICD_IROUTER929,Interrupt Routing Register 929"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D10++0x07
line.quad 0x00 "GICD_IROUTER930,Interrupt Routing Register 930"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D18++0x07
line.quad 0x00 "GICD_IROUTER931,Interrupt Routing Register 931"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D20++0x07
line.quad 0x00 "GICD_IROUTER932,Interrupt Routing Register 932"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D28++0x07
line.quad 0x00 "GICD_IROUTER933,Interrupt Routing Register 933"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D30++0x07
line.quad 0x00 "GICD_IROUTER934,Interrupt Routing Register 934"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D38++0x07
line.quad 0x00 "GICD_IROUTER935,Interrupt Routing Register 935"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D40++0x07
line.quad 0x00 "GICD_IROUTER936,Interrupt Routing Register 936"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D48++0x07
line.quad 0x00 "GICD_IROUTER937,Interrupt Routing Register 937"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D50++0x07
line.quad 0x00 "GICD_IROUTER938,Interrupt Routing Register 938"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D58++0x07
line.quad 0x00 "GICD_IROUTER939,Interrupt Routing Register 939"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D60++0x07
line.quad 0x00 "GICD_IROUTER940,Interrupt Routing Register 940"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D68++0x07
line.quad 0x00 "GICD_IROUTER941,Interrupt Routing Register 941"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D70++0x07
line.quad 0x00 "GICD_IROUTER942,Interrupt Routing Register 942"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D78++0x07
line.quad 0x00 "GICD_IROUTER943,Interrupt Routing Register 943"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D80++0x07
line.quad 0x00 "GICD_IROUTER944,Interrupt Routing Register 944"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D88++0x07
line.quad 0x00 "GICD_IROUTER945,Interrupt Routing Register 945"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D90++0x07
line.quad 0x00 "GICD_IROUTER946,Interrupt Routing Register 946"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7D98++0x07
line.quad 0x00 "GICD_IROUTER947,Interrupt Routing Register 947"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DA0++0x07
line.quad 0x00 "GICD_IROUTER948,Interrupt Routing Register 948"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DA8++0x07
line.quad 0x00 "GICD_IROUTER949,Interrupt Routing Register 949"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DB0++0x07
line.quad 0x00 "GICD_IROUTER950,Interrupt Routing Register 950"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DB8++0x07
line.quad 0x00 "GICD_IROUTER951,Interrupt Routing Register 951"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DC0++0x07
line.quad 0x00 "GICD_IROUTER952,Interrupt Routing Register 952"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DC8++0x07
line.quad 0x00 "GICD_IROUTER953,Interrupt Routing Register 953"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DD0++0x07
line.quad 0x00 "GICD_IROUTER954,Interrupt Routing Register 954"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DD8++0x07
line.quad 0x00 "GICD_IROUTER955,Interrupt Routing Register 955"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DE0++0x07
line.quad 0x00 "GICD_IROUTER956,Interrupt Routing Register 956"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DE8++0x07
line.quad 0x00 "GICD_IROUTER957,Interrupt Routing Register 957"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DF0++0x07
line.quad 0x00 "GICD_IROUTER958,Interrupt Routing Register 958"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7DF8++0x07
line.quad 0x00 "GICD_IROUTER959,Interrupt Routing Register 959"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E00++0x07
line.quad 0x00 "GICD_IROUTER960,Interrupt Routing Register 960"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E08++0x07
line.quad 0x00 "GICD_IROUTER961,Interrupt Routing Register 961"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E10++0x07
line.quad 0x00 "GICD_IROUTER962,Interrupt Routing Register 962"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E18++0x07
line.quad 0x00 "GICD_IROUTER963,Interrupt Routing Register 963"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E20++0x07
line.quad 0x00 "GICD_IROUTER964,Interrupt Routing Register 964"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E28++0x07
line.quad 0x00 "GICD_IROUTER965,Interrupt Routing Register 965"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E30++0x07
line.quad 0x00 "GICD_IROUTER966,Interrupt Routing Register 966"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E38++0x07
line.quad 0x00 "GICD_IROUTER967,Interrupt Routing Register 967"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E40++0x07
line.quad 0x00 "GICD_IROUTER968,Interrupt Routing Register 968"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E48++0x07
line.quad 0x00 "GICD_IROUTER969,Interrupt Routing Register 969"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E50++0x07
line.quad 0x00 "GICD_IROUTER970,Interrupt Routing Register 970"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E58++0x07
line.quad 0x00 "GICD_IROUTER971,Interrupt Routing Register 971"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E60++0x07
line.quad 0x00 "GICD_IROUTER972,Interrupt Routing Register 972"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E68++0x07
line.quad 0x00 "GICD_IROUTER973,Interrupt Routing Register 973"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E70++0x07
line.quad 0x00 "GICD_IROUTER974,Interrupt Routing Register 974"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E78++0x07
line.quad 0x00 "GICD_IROUTER975,Interrupt Routing Register 975"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E80++0x07
line.quad 0x00 "GICD_IROUTER976,Interrupt Routing Register 976"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E88++0x07
line.quad 0x00 "GICD_IROUTER977,Interrupt Routing Register 977"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E90++0x07
line.quad 0x00 "GICD_IROUTER978,Interrupt Routing Register 978"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7E98++0x07
line.quad 0x00 "GICD_IROUTER979,Interrupt Routing Register 979"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EA0++0x07
line.quad 0x00 "GICD_IROUTER980,Interrupt Routing Register 980"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EA8++0x07
line.quad 0x00 "GICD_IROUTER981,Interrupt Routing Register 981"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EB0++0x07
line.quad 0x00 "GICD_IROUTER982,Interrupt Routing Register 982"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EB8++0x07
line.quad 0x00 "GICD_IROUTER983,Interrupt Routing Register 983"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EC0++0x07
line.quad 0x00 "GICD_IROUTER984,Interrupt Routing Register 984"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EC8++0x07
line.quad 0x00 "GICD_IROUTER985,Interrupt Routing Register 985"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7ED0++0x07
line.quad 0x00 "GICD_IROUTER986,Interrupt Routing Register 986"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7ED8++0x07
line.quad 0x00 "GICD_IROUTER987,Interrupt Routing Register 987"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EE0++0x07
line.quad 0x00 "GICD_IROUTER988,Interrupt Routing Register 988"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EE8++0x07
line.quad 0x00 "GICD_IROUTER989,Interrupt Routing Register 989"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EF0++0x07
line.quad 0x00 "GICD_IROUTER990,Interrupt Routing Register 990"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
group.quad 0x7EF8++0x07
line.quad 0x00 "GICD_IROUTER991,Interrupt Routing Register 991"
hexmask.quad.byte 0x00 32.--39. 1. " AFF3 ,Affinity level 3"
bitfld.quad 0x00 31. "  IRM  ,Interrupt Routing Mode. Defines how SPIs are routed in an affinity hierarchy" "PE specified by AFFn fields,Any PE defined as a participating node"
textline "                                         "
hexmask.quad.byte 0x00 16.--23. 1. " AFF2 ,Affinity level 2"
hexmask.quad.byte 0x00 8.--15. 1. "  AFF1 ,Affinity level 1"
textline "                                         "
hexmask.quad.byte 0x00 0.--7. 1. " AFF0 ,Affinity level 0"
tree.end
width 22.
tree "Implementation Defined Test Registers"
rgroup.long 0xC000++0x03
line.long 0x00 "GICD_ESTATUSR,GICD_ESTATUSR"
bitfld.long 0x00 31. " SRWP     ,Super Register Write Pending" "Not pending,Pending"
wgroup.long 0xC004++0x03
line.long 0x00 "GICD_ERRTESTR,Error Test Register"
bitfld.long 0x00 1. " AXIM_ERR ,Drives the axim_err pin to 0b1 for 1 cycle" "Low,High"
bitfld.long 0x00 0. "         ECC_FATAL ,Drives the ecc_fatal pin to 0b1 for 1 cycle" "Low,High"
textline "                               "
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x01)
rgroup.long 0xC084++0x03
line.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 0"
bitfld.long 0x00 31. " SPIS63  ,SPI Status Bit 63" "Low,High"
bitfld.long 0x00 30. "  SPIS62  ,SPI Status Bit 62" "Low,High"
bitfld.long 0x00 29. "  SPIS61  ,SPI Status Bit 61" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS60  ,SPI Status Bit 60" "Low,High"
bitfld.long 0x00 27. "  SPIS59  ,SPI Status Bit 59" "Low,High"
bitfld.long 0x00 26. "  SPIS58  ,SPI Status Bit 58" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS57  ,SPI Status Bit 57" "Low,High"
bitfld.long 0x00 24. "  SPIS56  ,SPI Status Bit 56" "Low,High"
bitfld.long 0x00 23. "  SPIS55  ,SPI Status Bit 55" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS54  ,SPI Status Bit 54" "Low,High"
bitfld.long 0x00 21. "  SPIS53  ,SPI Status Bit 53" "Low,High"
bitfld.long 0x00 20. "  SPIS52  ,SPI Status Bit 52" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS51  ,SPI Status Bit 51" "Low,High"
bitfld.long 0x00 18. "  SPIS50  ,SPI Status Bit 50" "Low,High"
bitfld.long 0x00 17. "  SPIS49  ,SPI Status Bit 49" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS48  ,SPI Status Bit 48" "Low,High"
bitfld.long 0x00 15. "  SPIS47  ,SPI Status Bit 47" "Low,High"
bitfld.long 0x00 14. "  SPIS46  ,SPI Status Bit 46" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS45  ,SPI Status Bit 45" "Low,High"
bitfld.long 0x00 12. "  SPIS44  ,SPI Status Bit 44" "Low,High"
bitfld.long 0x00 11. "  SPIS43  ,SPI Status Bit 43" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS42  ,SPI Status Bit 42" "Low,High"
bitfld.long 0x00 9. "  SPIS41  ,SPI Status Bit 41" "Low,High"
bitfld.long 0x00 8. "  SPIS40  ,SPI Status Bit 40" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS39  ,SPI Status Bit 39" "Low,High"
bitfld.long 0x00 6. "  SPIS38  ,SPI Status Bit 38" "Low,High"
bitfld.long 0x00 5. "  SPIS37  ,SPI Status Bit 37" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS36  ,SPI Status Bit 36" "Low,High"
bitfld.long 0x00 3. "  SPIS35  ,SPI Status Bit 35" "Low,High"
bitfld.long 0x00 2. "  SPIS34  ,SPI Status Bit 34" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS33  ,SPI Status Bit 33" "Low,High"
bitfld.long 0x00 0. "  SPIS32  ,SPI Status Bit 32" "Low,High"
else
hgroup.long 0xC084++0x03
hide.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 0"
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
textline "                               "
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x02)
rgroup.long 0xC088++0x03
line.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1"
bitfld.long 0x00 31. " SPIS95  ,SPI Status Bit 95" "Low,High"
bitfld.long 0x00 30. "  SPIS94  ,SPI Status Bit 94" "Low,High"
bitfld.long 0x00 29. "  SPIS93  ,SPI Status Bit 93" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS92  ,SPI Status Bit 92" "Low,High"
bitfld.long 0x00 27. "  SPIS91  ,SPI Status Bit 91" "Low,High"
bitfld.long 0x00 26. "  SPIS90  ,SPI Status Bit 90" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS89  ,SPI Status Bit 89" "Low,High"
bitfld.long 0x00 24. "  SPIS88  ,SPI Status Bit 88" "Low,High"
bitfld.long 0x00 23. "  SPIS87  ,SPI Status Bit 87" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS86  ,SPI Status Bit 86" "Low,High"
bitfld.long 0x00 21. "  SPIS85  ,SPI Status Bit 85" "Low,High"
bitfld.long 0x00 20. "  SPIS84  ,SPI Status Bit 84" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS83  ,SPI Status Bit 83" "Low,High"
bitfld.long 0x00 18. "  SPIS82  ,SPI Status Bit 82" "Low,High"
bitfld.long 0x00 17. "  SPIS81  ,SPI Status Bit 81" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS80  ,SPI Status Bit 80" "Low,High"
bitfld.long 0x00 15. "  SPIS79  ,SPI Status Bit 79" "Low,High"
bitfld.long 0x00 14. "  SPIS78  ,SPI Status Bit 78" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS77  ,SPI Status Bit 77" "Low,High"
bitfld.long 0x00 12. "  SPIS76  ,SPI Status Bit 76" "Low,High"
bitfld.long 0x00 11. "  SPIS75  ,SPI Status Bit 75" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS74  ,SPI Status Bit 74" "Low,High"
bitfld.long 0x00 9. "  SPIS73  ,SPI Status Bit 73" "Low,High"
bitfld.long 0x00 8. "  SPIS72  ,SPI Status Bit 72" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS71  ,SPI Status Bit 71" "Low,High"
bitfld.long 0x00 6. "  SPIS70  ,SPI Status Bit 70" "Low,High"
bitfld.long 0x00 5. "  SPIS69  ,SPI Status Bit 69" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS68  ,SPI Status Bit 68" "Low,High"
bitfld.long 0x00 3. "  SPIS67  ,SPI Status Bit 67" "Low,High"
bitfld.long 0x00 2. "  SPIS66  ,SPI Status Bit 66" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS65  ,SPI Status Bit 65" "Low,High"
bitfld.long 0x00 0. "  SPIS64  ,SPI Status Bit 64" "Low,High"
else
hgroup.long 0xC088++0x03
hide.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x03)
rgroup.long 0xC08C++0x03
line.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2"
bitfld.long 0x00 31. " SPIS127 ,SPI Status Bit 127" "Low,High"
bitfld.long 0x00 30. "  SPIS126 ,SPI Status Bit 126" "Low,High"
bitfld.long 0x00 29. "  SPIS125 ,SPI Status Bit 125" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS124 ,SPI Status Bit 124" "Low,High"
bitfld.long 0x00 27. "  SPIS123 ,SPI Status Bit 123" "Low,High"
bitfld.long 0x00 26. "  SPIS122 ,SPI Status Bit 122" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS121 ,SPI Status Bit 121" "Low,High"
bitfld.long 0x00 24. "  SPIS120 ,SPI Status Bit 120" "Low,High"
bitfld.long 0x00 23. "  SPIS119 ,SPI Status Bit 119" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS118 ,SPI Status Bit 118" "Low,High"
bitfld.long 0x00 21. "  SPIS117 ,SPI Status Bit 117" "Low,High"
bitfld.long 0x00 20. "  SPIS116 ,SPI Status Bit 116" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS115 ,SPI Status Bit 115" "Low,High"
bitfld.long 0x00 18. "  SPIS114 ,SPI Status Bit 114" "Low,High"
bitfld.long 0x00 17. "  SPIS113 ,SPI Status Bit 113" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS112 ,SPI Status Bit 112" "Low,High"
bitfld.long 0x00 15. "  SPIS111 ,SPI Status Bit 111" "Low,High"
bitfld.long 0x00 14. "  SPIS110 ,SPI Status Bit 110" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS109 ,SPI Status Bit 109" "Low,High"
bitfld.long 0x00 12. "  SPIS108 ,SPI Status Bit 108" "Low,High"
bitfld.long 0x00 11. "  SPIS107 ,SPI Status Bit 107" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS106 ,SPI Status Bit 106" "Low,High"
bitfld.long 0x00 9. "  SPIS105 ,SPI Status Bit 105" "Low,High"
bitfld.long 0x00 8. "  SPIS104 ,SPI Status Bit 104" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS103 ,SPI Status Bit 103" "Low,High"
bitfld.long 0x00 6. "  SPIS102 ,SPI Status Bit 102" "Low,High"
bitfld.long 0x00 5. "  SPIS101 ,SPI Status Bit 101" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS100 ,SPI Status Bit 100" "Low,High"
bitfld.long 0x00 3. "  SPIS99  ,SPI Status Bit 99" "Low,High"
bitfld.long 0x00 2. "  SPIS98  ,SPI Status Bit 98" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS97  ,SPI Status Bit 97" "Low,High"
bitfld.long 0x00 0. "  SPIS96  ,SPI Status Bit 96" "Low,High"
else
hgroup.long 0xC08C++0x03
hide.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x04)
rgroup.long 0xC090++0x03
line.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3"
bitfld.long 0x00 31. " SPIS159 ,SPI Status Bit 159" "Low,High"
bitfld.long 0x00 30. "  SPIS158 ,SPI Status Bit 158" "Low,High"
bitfld.long 0x00 29. "  SPIS157 ,SPI Status Bit 157" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS156 ,SPI Status Bit 156" "Low,High"
bitfld.long 0x00 27. "  SPIS155 ,SPI Status Bit 155" "Low,High"
bitfld.long 0x00 26. "  SPIS154 ,SPI Status Bit 154" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS153 ,SPI Status Bit 153" "Low,High"
bitfld.long 0x00 24. "  SPIS152 ,SPI Status Bit 152" "Low,High"
bitfld.long 0x00 23. "  SPIS151 ,SPI Status Bit 151" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS150 ,SPI Status Bit 150" "Low,High"
bitfld.long 0x00 21. "  SPIS149 ,SPI Status Bit 149" "Low,High"
bitfld.long 0x00 20. "  SPIS148 ,SPI Status Bit 148" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS147 ,SPI Status Bit 147" "Low,High"
bitfld.long 0x00 18. "  SPIS146 ,SPI Status Bit 146" "Low,High"
bitfld.long 0x00 17. "  SPIS145 ,SPI Status Bit 145" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS144 ,SPI Status Bit 144" "Low,High"
bitfld.long 0x00 15. "  SPIS143 ,SPI Status Bit 143" "Low,High"
bitfld.long 0x00 14. "  SPIS142 ,SPI Status Bit 142" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS141 ,SPI Status Bit 141" "Low,High"
bitfld.long 0x00 12. "  SPIS140 ,SPI Status Bit 140" "Low,High"
bitfld.long 0x00 11. "  SPIS139 ,SPI Status Bit 139" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS138 ,SPI Status Bit 138" "Low,High"
bitfld.long 0x00 9. "  SPIS137 ,SPI Status Bit 137" "Low,High"
bitfld.long 0x00 8. "  SPIS136 ,SPI Status Bit 136" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS135 ,SPI Status Bit 135" "Low,High"
bitfld.long 0x00 6. "  SPIS134 ,SPI Status Bit 134" "Low,High"
bitfld.long 0x00 5. "  SPIS133 ,SPI Status Bit 133" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS132 ,SPI Status Bit 132" "Low,High"
bitfld.long 0x00 3. "  SPIS131 ,SPI Status Bit 131" "Low,High"
bitfld.long 0x00 2. "  SPIS130 ,SPI Status Bit 130" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS129 ,SPI Status Bit 129" "Low,High"
bitfld.long 0x00 0. "  SPIS128 ,SPI Status Bit 128" "Low,High"
else
hgroup.long 0xC090++0x03
hide.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x05)
rgroup.long 0xC094++0x03
line.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4"
bitfld.long 0x00 31. " SPIS191 ,SPI Status Bit 191" "Low,High"
bitfld.long 0x00 30. "  SPIS190 ,SPI Status Bit 190" "Low,High"
bitfld.long 0x00 29. "  SPIS189 ,SPI Status Bit 189" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS188 ,SPI Status Bit 188" "Low,High"
bitfld.long 0x00 27. "  SPIS187 ,SPI Status Bit 187" "Low,High"
bitfld.long 0x00 26. "  SPIS186 ,SPI Status Bit 186" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS185 ,SPI Status Bit 185" "Low,High"
bitfld.long 0x00 24. "  SPIS184 ,SPI Status Bit 184" "Low,High"
bitfld.long 0x00 23. "  SPIS183 ,SPI Status Bit 183" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS182 ,SPI Status Bit 182" "Low,High"
bitfld.long 0x00 21. "  SPIS181 ,SPI Status Bit 181" "Low,High"
bitfld.long 0x00 20. "  SPIS180 ,SPI Status Bit 180" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS179 ,SPI Status Bit 179" "Low,High"
bitfld.long 0x00 18. "  SPIS178 ,SPI Status Bit 178" "Low,High"
bitfld.long 0x00 17. "  SPIS177 ,SPI Status Bit 177" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS176 ,SPI Status Bit 176" "Low,High"
bitfld.long 0x00 15. "  SPIS175 ,SPI Status Bit 175" "Low,High"
bitfld.long 0x00 14. "  SPIS174 ,SPI Status Bit 174" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS173 ,SPI Status Bit 173" "Low,High"
bitfld.long 0x00 12. "  SPIS172 ,SPI Status Bit 172" "Low,High"
bitfld.long 0x00 11. "  SPIS171 ,SPI Status Bit 171" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS170 ,SPI Status Bit 170" "Low,High"
bitfld.long 0x00 9. "  SPIS169 ,SPI Status Bit 169" "Low,High"
bitfld.long 0x00 8. "  SPIS168 ,SPI Status Bit 168" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS167 ,SPI Status Bit 167" "Low,High"
bitfld.long 0x00 6. "  SPIS166 ,SPI Status Bit 166" "Low,High"
bitfld.long 0x00 5. "  SPIS165 ,SPI Status Bit 165" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS164 ,SPI Status Bit 164" "Low,High"
bitfld.long 0x00 3. "  SPIS163 ,SPI Status Bit 163" "Low,High"
bitfld.long 0x00 2. "  SPIS162 ,SPI Status Bit 162" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS161 ,SPI Status Bit 161" "Low,High"
bitfld.long 0x00 0. "  SPIS160 ,SPI Status Bit 160" "Low,High"
else
hgroup.long 0xC094++0x03
hide.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x06)
rgroup.long 0xC098++0x03
line.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5"
bitfld.long 0x00 31. " SPIS223 ,SPI Status Bit 223" "Low,High"
bitfld.long 0x00 30. "  SPIS222 ,SPI Status Bit 222" "Low,High"
bitfld.long 0x00 29. "  SPIS221 ,SPI Status Bit 221" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS220 ,SPI Status Bit 220" "Low,High"
bitfld.long 0x00 27. "  SPIS219 ,SPI Status Bit 219" "Low,High"
bitfld.long 0x00 26. "  SPIS218 ,SPI Status Bit 218" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS217 ,SPI Status Bit 217" "Low,High"
bitfld.long 0x00 24. "  SPIS216 ,SPI Status Bit 216" "Low,High"
bitfld.long 0x00 23. "  SPIS215 ,SPI Status Bit 215" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS214 ,SPI Status Bit 214" "Low,High"
bitfld.long 0x00 21. "  SPIS213 ,SPI Status Bit 213" "Low,High"
bitfld.long 0x00 20. "  SPIS212 ,SPI Status Bit 212" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS211 ,SPI Status Bit 211" "Low,High"
bitfld.long 0x00 18. "  SPIS210 ,SPI Status Bit 210" "Low,High"
bitfld.long 0x00 17. "  SPIS209 ,SPI Status Bit 209" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS208 ,SPI Status Bit 208" "Low,High"
bitfld.long 0x00 15. "  SPIS207 ,SPI Status Bit 207" "Low,High"
bitfld.long 0x00 14. "  SPIS206 ,SPI Status Bit 206" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS205 ,SPI Status Bit 205" "Low,High"
bitfld.long 0x00 12. "  SPIS204 ,SPI Status Bit 204" "Low,High"
bitfld.long 0x00 11. "  SPIS203 ,SPI Status Bit 203" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS202 ,SPI Status Bit 202" "Low,High"
bitfld.long 0x00 9. "  SPIS201 ,SPI Status Bit 201" "Low,High"
bitfld.long 0x00 8. "  SPIS200 ,SPI Status Bit 200" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS199 ,SPI Status Bit 199" "Low,High"
bitfld.long 0x00 6. "  SPIS198 ,SPI Status Bit 198" "Low,High"
bitfld.long 0x00 5. "  SPIS197 ,SPI Status Bit 197" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS196 ,SPI Status Bit 196" "Low,High"
bitfld.long 0x00 3. "  SPIS195 ,SPI Status Bit 195" "Low,High"
bitfld.long 0x00 2. "  SPIS194 ,SPI Status Bit 194" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS193 ,SPI Status Bit 193" "Low,High"
bitfld.long 0x00 0. "  SPIS192 ,SPI Status Bit 192" "Low,High"
else
hgroup.long 0xC098++0x03
hide.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x07)
rgroup.long 0xC09C++0x03
line.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6"
bitfld.long 0x00 31. " SPIS255 ,SPI Status Bit 255" "Low,High"
bitfld.long 0x00 30. "  SPIS254 ,SPI Status Bit 254" "Low,High"
bitfld.long 0x00 29. "  SPIS253 ,SPI Status Bit 253" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS252 ,SPI Status Bit 252" "Low,High"
bitfld.long 0x00 27. "  SPIS251 ,SPI Status Bit 251" "Low,High"
bitfld.long 0x00 26. "  SPIS250 ,SPI Status Bit 250" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS249 ,SPI Status Bit 249" "Low,High"
bitfld.long 0x00 24. "  SPIS248 ,SPI Status Bit 248" "Low,High"
bitfld.long 0x00 23. "  SPIS247 ,SPI Status Bit 247" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS246 ,SPI Status Bit 246" "Low,High"
bitfld.long 0x00 21. "  SPIS245 ,SPI Status Bit 245" "Low,High"
bitfld.long 0x00 20. "  SPIS244 ,SPI Status Bit 244" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS243 ,SPI Status Bit 243" "Low,High"
bitfld.long 0x00 18. "  SPIS242 ,SPI Status Bit 242" "Low,High"
bitfld.long 0x00 17. "  SPIS241 ,SPI Status Bit 241" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS240 ,SPI Status Bit 240" "Low,High"
bitfld.long 0x00 15. "  SPIS239 ,SPI Status Bit 239" "Low,High"
bitfld.long 0x00 14. "  SPIS238 ,SPI Status Bit 238" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS237 ,SPI Status Bit 237" "Low,High"
bitfld.long 0x00 12. "  SPIS236 ,SPI Status Bit 236" "Low,High"
bitfld.long 0x00 11. "  SPIS235 ,SPI Status Bit 235" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS234 ,SPI Status Bit 234" "Low,High"
bitfld.long 0x00 9. "  SPIS233 ,SPI Status Bit 233" "Low,High"
bitfld.long 0x00 8. "  SPIS232 ,SPI Status Bit 232" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS231 ,SPI Status Bit 231" "Low,High"
bitfld.long 0x00 6. "  SPIS230 ,SPI Status Bit 230" "Low,High"
bitfld.long 0x00 5. "  SPIS229 ,SPI Status Bit 229" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS228 ,SPI Status Bit 228" "Low,High"
bitfld.long 0x00 3. "  SPIS227 ,SPI Status Bit 227" "Low,High"
bitfld.long 0x00 2. "  SPIS226 ,SPI Status Bit 226" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS225 ,SPI Status Bit 225" "Low,High"
bitfld.long 0x00 0. "  SPIS224 ,SPI Status Bit 224" "Low,High"
else
hgroup.long 0xC09C++0x03
hide.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x08)
rgroup.long 0xC0A0++0x03
line.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7"
bitfld.long 0x00 31. " SPIS287 ,SPI Status Bit 287" "Low,High"
bitfld.long 0x00 30. "  SPIS286 ,SPI Status Bit 286" "Low,High"
bitfld.long 0x00 29. "  SPIS285 ,SPI Status Bit 285" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS284 ,SPI Status Bit 284" "Low,High"
bitfld.long 0x00 27. "  SPIS283 ,SPI Status Bit 283" "Low,High"
bitfld.long 0x00 26. "  SPIS282 ,SPI Status Bit 282" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS281 ,SPI Status Bit 281" "Low,High"
bitfld.long 0x00 24. "  SPIS280 ,SPI Status Bit 280" "Low,High"
bitfld.long 0x00 23. "  SPIS279 ,SPI Status Bit 279" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS278 ,SPI Status Bit 278" "Low,High"
bitfld.long 0x00 21. "  SPIS277 ,SPI Status Bit 277" "Low,High"
bitfld.long 0x00 20. "  SPIS276 ,SPI Status Bit 276" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS275 ,SPI Status Bit 275" "Low,High"
bitfld.long 0x00 18. "  SPIS274 ,SPI Status Bit 274" "Low,High"
bitfld.long 0x00 17. "  SPIS273 ,SPI Status Bit 273" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS272 ,SPI Status Bit 272" "Low,High"
bitfld.long 0x00 15. "  SPIS271 ,SPI Status Bit 271" "Low,High"
bitfld.long 0x00 14. "  SPIS270 ,SPI Status Bit 270" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS269 ,SPI Status Bit 269" "Low,High"
bitfld.long 0x00 12. "  SPIS268 ,SPI Status Bit 268" "Low,High"
bitfld.long 0x00 11. "  SPIS267 ,SPI Status Bit 267" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS266 ,SPI Status Bit 266" "Low,High"
bitfld.long 0x00 9. "  SPIS265 ,SPI Status Bit 265" "Low,High"
bitfld.long 0x00 8. "  SPIS264 ,SPI Status Bit 264" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS263 ,SPI Status Bit 263" "Low,High"
bitfld.long 0x00 6. "  SPIS262 ,SPI Status Bit 262" "Low,High"
bitfld.long 0x00 5. "  SPIS261 ,SPI Status Bit 261" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS260 ,SPI Status Bit 260" "Low,High"
bitfld.long 0x00 3. "  SPIS259 ,SPI Status Bit 259" "Low,High"
bitfld.long 0x00 2. "  SPIS258 ,SPI Status Bit 258" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS257 ,SPI Status Bit 257" "Low,High"
bitfld.long 0x00 0. "  SPIS256 ,SPI Status Bit 256" "Low,High"
else
hgroup.long 0xC0A0++0x03
hide.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x09)
rgroup.long 0xC0A4++0x03
line.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8"
bitfld.long 0x00 31. " SPIS319 ,SPI Status Bit 319" "Low,High"
bitfld.long 0x00 30. "  SPIS318 ,SPI Status Bit 318" "Low,High"
bitfld.long 0x00 29. "  SPIS317 ,SPI Status Bit 317" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS316 ,SPI Status Bit 316" "Low,High"
bitfld.long 0x00 27. "  SPIS315 ,SPI Status Bit 315" "Low,High"
bitfld.long 0x00 26. "  SPIS314 ,SPI Status Bit 314" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS313 ,SPI Status Bit 313" "Low,High"
bitfld.long 0x00 24. "  SPIS312 ,SPI Status Bit 312" "Low,High"
bitfld.long 0x00 23. "  SPIS311 ,SPI Status Bit 311" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS310 ,SPI Status Bit 310" "Low,High"
bitfld.long 0x00 21. "  SPIS309 ,SPI Status Bit 309" "Low,High"
bitfld.long 0x00 20. "  SPIS308 ,SPI Status Bit 308" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS307 ,SPI Status Bit 307" "Low,High"
bitfld.long 0x00 18. "  SPIS306 ,SPI Status Bit 306" "Low,High"
bitfld.long 0x00 17. "  SPIS305 ,SPI Status Bit 305" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS304 ,SPI Status Bit 304" "Low,High"
bitfld.long 0x00 15. "  SPIS303 ,SPI Status Bit 303" "Low,High"
bitfld.long 0x00 14. "  SPIS302 ,SPI Status Bit 302" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS301 ,SPI Status Bit 301" "Low,High"
bitfld.long 0x00 12. "  SPIS300 ,SPI Status Bit 300" "Low,High"
bitfld.long 0x00 11. "  SPIS299 ,SPI Status Bit 299" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS298 ,SPI Status Bit 298" "Low,High"
bitfld.long 0x00 9. "  SPIS297 ,SPI Status Bit 297" "Low,High"
bitfld.long 0x00 8. "  SPIS296 ,SPI Status Bit 296" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS295 ,SPI Status Bit 295" "Low,High"
bitfld.long 0x00 6. "  SPIS294 ,SPI Status Bit 294" "Low,High"
bitfld.long 0x00 5. "  SPIS293 ,SPI Status Bit 293" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS292 ,SPI Status Bit 292" "Low,High"
bitfld.long 0x00 3. "  SPIS291 ,SPI Status Bit 291" "Low,High"
bitfld.long 0x00 2. "  SPIS290 ,SPI Status Bit 290" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS289 ,SPI Status Bit 289" "Low,High"
bitfld.long 0x00 0. "  SPIS288 ,SPI Status Bit 288" "Low,High"
else
hgroup.long 0xC0A4++0x03
hide.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0A)
rgroup.long 0xC0A8++0x03
line.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9"
bitfld.long 0x00 31. " SPIS351 ,SPI Status Bit 351" "Low,High"
bitfld.long 0x00 30. "  SPIS350 ,SPI Status Bit 350" "Low,High"
bitfld.long 0x00 29. "  SPIS349 ,SPI Status Bit 349" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS348 ,SPI Status Bit 348" "Low,High"
bitfld.long 0x00 27. "  SPIS347 ,SPI Status Bit 347" "Low,High"
bitfld.long 0x00 26. "  SPIS346 ,SPI Status Bit 346" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS345 ,SPI Status Bit 345" "Low,High"
bitfld.long 0x00 24. "  SPIS344 ,SPI Status Bit 344" "Low,High"
bitfld.long 0x00 23. "  SPIS343 ,SPI Status Bit 343" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS342 ,SPI Status Bit 342" "Low,High"
bitfld.long 0x00 21. "  SPIS341 ,SPI Status Bit 341" "Low,High"
bitfld.long 0x00 20. "  SPIS340 ,SPI Status Bit 340" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS339 ,SPI Status Bit 339" "Low,High"
bitfld.long 0x00 18. "  SPIS338 ,SPI Status Bit 338" "Low,High"
bitfld.long 0x00 17. "  SPIS337 ,SPI Status Bit 337" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS336 ,SPI Status Bit 336" "Low,High"
bitfld.long 0x00 15. "  SPIS335 ,SPI Status Bit 335" "Low,High"
bitfld.long 0x00 14. "  SPIS334 ,SPI Status Bit 334" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS333 ,SPI Status Bit 333" "Low,High"
bitfld.long 0x00 12. "  SPIS332 ,SPI Status Bit 332" "Low,High"
bitfld.long 0x00 11. "  SPIS331 ,SPI Status Bit 331" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS330 ,SPI Status Bit 330" "Low,High"
bitfld.long 0x00 9. "  SPIS329 ,SPI Status Bit 329" "Low,High"
bitfld.long 0x00 8. "  SPIS328 ,SPI Status Bit 328" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS327 ,SPI Status Bit 327" "Low,High"
bitfld.long 0x00 6. "  SPIS326 ,SPI Status Bit 326" "Low,High"
bitfld.long 0x00 5. "  SPIS325 ,SPI Status Bit 325" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS324 ,SPI Status Bit 324" "Low,High"
bitfld.long 0x00 3. "  SPIS323 ,SPI Status Bit 323" "Low,High"
bitfld.long 0x00 2. "  SPIS322 ,SPI Status Bit 322" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS321 ,SPI Status Bit 321" "Low,High"
bitfld.long 0x00 0. "  SPIS320 ,SPI Status Bit 320" "Low,High"
else
hgroup.long 0xC0A8++0x03
hide.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0B)
rgroup.long 0xC0AC++0x03
line.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10"
bitfld.long 0x00 31. " SPIS383 ,SPI Status Bit 383" "Low,High"
bitfld.long 0x00 30. "  SPIS382 ,SPI Status Bit 382" "Low,High"
bitfld.long 0x00 29. "  SPIS381 ,SPI Status Bit 381" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS380 ,SPI Status Bit 380" "Low,High"
bitfld.long 0x00 27. "  SPIS379 ,SPI Status Bit 379" "Low,High"
bitfld.long 0x00 26. "  SPIS378 ,SPI Status Bit 378" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS377 ,SPI Status Bit 377" "Low,High"
bitfld.long 0x00 24. "  SPIS376 ,SPI Status Bit 376" "Low,High"
bitfld.long 0x00 23. "  SPIS375 ,SPI Status Bit 375" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS374 ,SPI Status Bit 374" "Low,High"
bitfld.long 0x00 21. "  SPIS373 ,SPI Status Bit 373" "Low,High"
bitfld.long 0x00 20. "  SPIS372 ,SPI Status Bit 372" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS371 ,SPI Status Bit 371" "Low,High"
bitfld.long 0x00 18. "  SPIS370 ,SPI Status Bit 370" "Low,High"
bitfld.long 0x00 17. "  SPIS369 ,SPI Status Bit 369" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS368 ,SPI Status Bit 368" "Low,High"
bitfld.long 0x00 15. "  SPIS367 ,SPI Status Bit 367" "Low,High"
bitfld.long 0x00 14. "  SPIS366 ,SPI Status Bit 366" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS365 ,SPI Status Bit 365" "Low,High"
bitfld.long 0x00 12. "  SPIS364 ,SPI Status Bit 364" "Low,High"
bitfld.long 0x00 11. "  SPIS363 ,SPI Status Bit 363" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS362 ,SPI Status Bit 362" "Low,High"
bitfld.long 0x00 9. "  SPIS361 ,SPI Status Bit 361" "Low,High"
bitfld.long 0x00 8. "  SPIS360 ,SPI Status Bit 360" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS359 ,SPI Status Bit 359" "Low,High"
bitfld.long 0x00 6. "  SPIS358 ,SPI Status Bit 358" "Low,High"
bitfld.long 0x00 5. "  SPIS357 ,SPI Status Bit 357" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS356 ,SPI Status Bit 356" "Low,High"
bitfld.long 0x00 3. "  SPIS355 ,SPI Status Bit 355" "Low,High"
bitfld.long 0x00 2. "  SPIS354 ,SPI Status Bit 354" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS353 ,SPI Status Bit 353" "Low,High"
bitfld.long 0x00 0. "  SPIS352 ,SPI Status Bit 352" "Low,High"
else
hgroup.long 0xC0AC++0x03
hide.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0C)
rgroup.long 0xC0B0++0x03
line.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11"
bitfld.long 0x00 31. " SPIS415 ,SPI Status Bit 415" "Low,High"
bitfld.long 0x00 30. "  SPIS414 ,SPI Status Bit 414" "Low,High"
bitfld.long 0x00 29. "  SPIS413 ,SPI Status Bit 413" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS412 ,SPI Status Bit 412" "Low,High"
bitfld.long 0x00 27. "  SPIS411 ,SPI Status Bit 411" "Low,High"
bitfld.long 0x00 26. "  SPIS410 ,SPI Status Bit 410" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS409 ,SPI Status Bit 409" "Low,High"
bitfld.long 0x00 24. "  SPIS408 ,SPI Status Bit 408" "Low,High"
bitfld.long 0x00 23. "  SPIS407 ,SPI Status Bit 407" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS406 ,SPI Status Bit 406" "Low,High"
bitfld.long 0x00 21. "  SPIS405 ,SPI Status Bit 405" "Low,High"
bitfld.long 0x00 20. "  SPIS404 ,SPI Status Bit 404" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS403 ,SPI Status Bit 403" "Low,High"
bitfld.long 0x00 18. "  SPIS402 ,SPI Status Bit 402" "Low,High"
bitfld.long 0x00 17. "  SPIS401 ,SPI Status Bit 401" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS400 ,SPI Status Bit 400" "Low,High"
bitfld.long 0x00 15. "  SPIS399 ,SPI Status Bit 399" "Low,High"
bitfld.long 0x00 14. "  SPIS398 ,SPI Status Bit 398" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS397 ,SPI Status Bit 397" "Low,High"
bitfld.long 0x00 12. "  SPIS396 ,SPI Status Bit 396" "Low,High"
bitfld.long 0x00 11. "  SPIS395 ,SPI Status Bit 395" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS394 ,SPI Status Bit 394" "Low,High"
bitfld.long 0x00 9. "  SPIS393 ,SPI Status Bit 393" "Low,High"
bitfld.long 0x00 8. "  SPIS392 ,SPI Status Bit 392" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS391 ,SPI Status Bit 391" "Low,High"
bitfld.long 0x00 6. "  SPIS390 ,SPI Status Bit 390" "Low,High"
bitfld.long 0x00 5. "  SPIS389 ,SPI Status Bit 389" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS388 ,SPI Status Bit 388" "Low,High"
bitfld.long 0x00 3. "  SPIS387 ,SPI Status Bit 387" "Low,High"
bitfld.long 0x00 2. "  SPIS386 ,SPI Status Bit 386" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS385 ,SPI Status Bit 385" "Low,High"
bitfld.long 0x00 0. "  SPIS384 ,SPI Status Bit 384" "Low,High"
else
hgroup.long 0xC0B0++0x03
hide.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0D)
rgroup.long 0xC0B4++0x03
line.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12"
bitfld.long 0x00 31. " SPIS447 ,SPI Status Bit 447" "Low,High"
bitfld.long 0x00 30. "  SPIS446 ,SPI Status Bit 446" "Low,High"
bitfld.long 0x00 29. "  SPIS445 ,SPI Status Bit 445" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS444 ,SPI Status Bit 444" "Low,High"
bitfld.long 0x00 27. "  SPIS443 ,SPI Status Bit 443" "Low,High"
bitfld.long 0x00 26. "  SPIS442 ,SPI Status Bit 442" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS441 ,SPI Status Bit 441" "Low,High"
bitfld.long 0x00 24. "  SPIS440 ,SPI Status Bit 440" "Low,High"
bitfld.long 0x00 23. "  SPIS439 ,SPI Status Bit 439" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS438 ,SPI Status Bit 438" "Low,High"
bitfld.long 0x00 21. "  SPIS437 ,SPI Status Bit 437" "Low,High"
bitfld.long 0x00 20. "  SPIS436 ,SPI Status Bit 436" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS435 ,SPI Status Bit 435" "Low,High"
bitfld.long 0x00 18. "  SPIS434 ,SPI Status Bit 434" "Low,High"
bitfld.long 0x00 17. "  SPIS433 ,SPI Status Bit 433" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS432 ,SPI Status Bit 432" "Low,High"
bitfld.long 0x00 15. "  SPIS431 ,SPI Status Bit 431" "Low,High"
bitfld.long 0x00 14. "  SPIS430 ,SPI Status Bit 430" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS429 ,SPI Status Bit 429" "Low,High"
bitfld.long 0x00 12. "  SPIS428 ,SPI Status Bit 428" "Low,High"
bitfld.long 0x00 11. "  SPIS427 ,SPI Status Bit 427" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS426 ,SPI Status Bit 426" "Low,High"
bitfld.long 0x00 9. "  SPIS425 ,SPI Status Bit 425" "Low,High"
bitfld.long 0x00 8. "  SPIS424 ,SPI Status Bit 424" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS423 ,SPI Status Bit 423" "Low,High"
bitfld.long 0x00 6. "  SPIS422 ,SPI Status Bit 422" "Low,High"
bitfld.long 0x00 5. "  SPIS421 ,SPI Status Bit 421" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS420 ,SPI Status Bit 420" "Low,High"
bitfld.long 0x00 3. "  SPIS419 ,SPI Status Bit 419" "Low,High"
bitfld.long 0x00 2. "  SPIS418 ,SPI Status Bit 418" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS417 ,SPI Status Bit 417" "Low,High"
bitfld.long 0x00 0. "  SPIS416 ,SPI Status Bit 416" "Low,High"
else
hgroup.long 0xC0B4++0x03
hide.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0E)
rgroup.long 0xC0B8++0x03
line.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13"
bitfld.long 0x00 31. " SPIS479 ,SPI Status Bit 479" "Low,High"
bitfld.long 0x00 30. "  SPIS478 ,SPI Status Bit 478" "Low,High"
bitfld.long 0x00 29. "  SPIS477 ,SPI Status Bit 477" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS476 ,SPI Status Bit 476" "Low,High"
bitfld.long 0x00 27. "  SPIS475 ,SPI Status Bit 475" "Low,High"
bitfld.long 0x00 26. "  SPIS474 ,SPI Status Bit 474" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS473 ,SPI Status Bit 473" "Low,High"
bitfld.long 0x00 24. "  SPIS472 ,SPI Status Bit 472" "Low,High"
bitfld.long 0x00 23. "  SPIS471 ,SPI Status Bit 471" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS470 ,SPI Status Bit 470" "Low,High"
bitfld.long 0x00 21. "  SPIS469 ,SPI Status Bit 469" "Low,High"
bitfld.long 0x00 20. "  SPIS468 ,SPI Status Bit 468" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS467 ,SPI Status Bit 467" "Low,High"
bitfld.long 0x00 18. "  SPIS466 ,SPI Status Bit 466" "Low,High"
bitfld.long 0x00 17. "  SPIS465 ,SPI Status Bit 465" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS464 ,SPI Status Bit 464" "Low,High"
bitfld.long 0x00 15. "  SPIS463 ,SPI Status Bit 463" "Low,High"
bitfld.long 0x00 14. "  SPIS462 ,SPI Status Bit 462" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS461 ,SPI Status Bit 461" "Low,High"
bitfld.long 0x00 12. "  SPIS460 ,SPI Status Bit 460" "Low,High"
bitfld.long 0x00 11. "  SPIS459 ,SPI Status Bit 459" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS458 ,SPI Status Bit 458" "Low,High"
bitfld.long 0x00 9. "  SPIS457 ,SPI Status Bit 457" "Low,High"
bitfld.long 0x00 8. "  SPIS456 ,SPI Status Bit 456" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS455 ,SPI Status Bit 455" "Low,High"
bitfld.long 0x00 6. "  SPIS454 ,SPI Status Bit 454" "Low,High"
bitfld.long 0x00 5. "  SPIS453 ,SPI Status Bit 453" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS452 ,SPI Status Bit 452" "Low,High"
bitfld.long 0x00 3. "  SPIS451 ,SPI Status Bit 451" "Low,High"
bitfld.long 0x00 2. "  SPIS450 ,SPI Status Bit 450" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS449 ,SPI Status Bit 449" "Low,High"
bitfld.long 0x00 0. "  SPIS448 ,SPI Status Bit 448" "Low,High"
else
hgroup.long 0xC0B8++0x03
hide.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x0F)
rgroup.long 0xC0BC++0x03
line.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14"
bitfld.long 0x00 31. " SPIS511 ,SPI Status Bit 511" "Low,High"
bitfld.long 0x00 30. "  SPIS510 ,SPI Status Bit 510" "Low,High"
bitfld.long 0x00 29. "  SPIS509 ,SPI Status Bit 509" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS508 ,SPI Status Bit 508" "Low,High"
bitfld.long 0x00 27. "  SPIS507 ,SPI Status Bit 507" "Low,High"
bitfld.long 0x00 26. "  SPIS506 ,SPI Status Bit 506" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS505 ,SPI Status Bit 505" "Low,High"
bitfld.long 0x00 24. "  SPIS504 ,SPI Status Bit 504" "Low,High"
bitfld.long 0x00 23. "  SPIS503 ,SPI Status Bit 503" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS502 ,SPI Status Bit 502" "Low,High"
bitfld.long 0x00 21. "  SPIS501 ,SPI Status Bit 501" "Low,High"
bitfld.long 0x00 20. "  SPIS500 ,SPI Status Bit 500" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS499 ,SPI Status Bit 499" "Low,High"
bitfld.long 0x00 18. "  SPIS498 ,SPI Status Bit 498" "Low,High"
bitfld.long 0x00 17. "  SPIS497 ,SPI Status Bit 497" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS496 ,SPI Status Bit 496" "Low,High"
bitfld.long 0x00 15. "  SPIS495 ,SPI Status Bit 495" "Low,High"
bitfld.long 0x00 14. "  SPIS494 ,SPI Status Bit 494" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS493 ,SPI Status Bit 493" "Low,High"
bitfld.long 0x00 12. "  SPIS492 ,SPI Status Bit 492" "Low,High"
bitfld.long 0x00 11. "  SPIS491 ,SPI Status Bit 491" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS490 ,SPI Status Bit 490" "Low,High"
bitfld.long 0x00 9. "  SPIS489 ,SPI Status Bit 489" "Low,High"
bitfld.long 0x00 8. "  SPIS488 ,SPI Status Bit 488" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS487 ,SPI Status Bit 487" "Low,High"
bitfld.long 0x00 6. "  SPIS486 ,SPI Status Bit 486" "Low,High"
bitfld.long 0x00 5. "  SPIS485 ,SPI Status Bit 485" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS484 ,SPI Status Bit 484" "Low,High"
bitfld.long 0x00 3. "  SPIS483 ,SPI Status Bit 483" "Low,High"
bitfld.long 0x00 2. "  SPIS482 ,SPI Status Bit 482" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS481 ,SPI Status Bit 481" "Low,High"
bitfld.long 0x00 0. "  SPIS480 ,SPI Status Bit 480" "Low,High"
else
hgroup.long 0xC0BC++0x03
hide.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x10)
rgroup.long 0xC0C0++0x03
line.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15"
bitfld.long 0x00 31. " SPIS543 ,SPI Status Bit 543" "Low,High"
bitfld.long 0x00 30. "  SPIS542 ,SPI Status Bit 542" "Low,High"
bitfld.long 0x00 29. "  SPIS541 ,SPI Status Bit 541" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS540 ,SPI Status Bit 540" "Low,High"
bitfld.long 0x00 27. "  SPIS539 ,SPI Status Bit 539" "Low,High"
bitfld.long 0x00 26. "  SPIS538 ,SPI Status Bit 538" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS537 ,SPI Status Bit 537" "Low,High"
bitfld.long 0x00 24. "  SPIS536 ,SPI Status Bit 536" "Low,High"
bitfld.long 0x00 23. "  SPIS535 ,SPI Status Bit 535" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS534 ,SPI Status Bit 534" "Low,High"
bitfld.long 0x00 21. "  SPIS533 ,SPI Status Bit 533" "Low,High"
bitfld.long 0x00 20. "  SPIS532 ,SPI Status Bit 532" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS531 ,SPI Status Bit 531" "Low,High"
bitfld.long 0x00 18. "  SPIS530 ,SPI Status Bit 530" "Low,High"
bitfld.long 0x00 17. "  SPIS529 ,SPI Status Bit 529" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS528 ,SPI Status Bit 528" "Low,High"
bitfld.long 0x00 15. "  SPIS527 ,SPI Status Bit 527" "Low,High"
bitfld.long 0x00 14. "  SPIS526 ,SPI Status Bit 526" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS525 ,SPI Status Bit 525" "Low,High"
bitfld.long 0x00 12. "  SPIS524 ,SPI Status Bit 524" "Low,High"
bitfld.long 0x00 11. "  SPIS523 ,SPI Status Bit 523" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS522 ,SPI Status Bit 522" "Low,High"
bitfld.long 0x00 9. "  SPIS521 ,SPI Status Bit 521" "Low,High"
bitfld.long 0x00 8. "  SPIS520 ,SPI Status Bit 520" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS519 ,SPI Status Bit 519" "Low,High"
bitfld.long 0x00 6. "  SPIS518 ,SPI Status Bit 518" "Low,High"
bitfld.long 0x00 5. "  SPIS517 ,SPI Status Bit 517" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS516 ,SPI Status Bit 516" "Low,High"
bitfld.long 0x00 3. "  SPIS515 ,SPI Status Bit 515" "Low,High"
bitfld.long 0x00 2. "  SPIS514 ,SPI Status Bit 514" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS513 ,SPI Status Bit 513" "Low,High"
bitfld.long 0x00 0. "  SPIS512 ,SPI Status Bit 512" "Low,High"
else
hgroup.long 0xC0C0++0x03
hide.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x11)
rgroup.long 0xC0C4++0x03
line.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16"
bitfld.long 0x00 31. " SPIS575 ,SPI Status Bit 575" "Low,High"
bitfld.long 0x00 30. "  SPIS574 ,SPI Status Bit 574" "Low,High"
bitfld.long 0x00 29. "  SPIS573 ,SPI Status Bit 573" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS572 ,SPI Status Bit 572" "Low,High"
bitfld.long 0x00 27. "  SPIS571 ,SPI Status Bit 571" "Low,High"
bitfld.long 0x00 26. "  SPIS570 ,SPI Status Bit 570" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS569 ,SPI Status Bit 569" "Low,High"
bitfld.long 0x00 24. "  SPIS568 ,SPI Status Bit 568" "Low,High"
bitfld.long 0x00 23. "  SPIS567 ,SPI Status Bit 567" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS566 ,SPI Status Bit 566" "Low,High"
bitfld.long 0x00 21. "  SPIS565 ,SPI Status Bit 565" "Low,High"
bitfld.long 0x00 20. "  SPIS564 ,SPI Status Bit 564" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS563 ,SPI Status Bit 563" "Low,High"
bitfld.long 0x00 18. "  SPIS562 ,SPI Status Bit 562" "Low,High"
bitfld.long 0x00 17. "  SPIS561 ,SPI Status Bit 561" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS560 ,SPI Status Bit 560" "Low,High"
bitfld.long 0x00 15. "  SPIS559 ,SPI Status Bit 559" "Low,High"
bitfld.long 0x00 14. "  SPIS558 ,SPI Status Bit 558" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS557 ,SPI Status Bit 557" "Low,High"
bitfld.long 0x00 12. "  SPIS556 ,SPI Status Bit 556" "Low,High"
bitfld.long 0x00 11. "  SPIS555 ,SPI Status Bit 555" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS554 ,SPI Status Bit 554" "Low,High"
bitfld.long 0x00 9. "  SPIS553 ,SPI Status Bit 553" "Low,High"
bitfld.long 0x00 8. "  SPIS552 ,SPI Status Bit 552" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS551 ,SPI Status Bit 551" "Low,High"
bitfld.long 0x00 6. "  SPIS550 ,SPI Status Bit 550" "Low,High"
bitfld.long 0x00 5. "  SPIS549 ,SPI Status Bit 549" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS548 ,SPI Status Bit 548" "Low,High"
bitfld.long 0x00 3. "  SPIS547 ,SPI Status Bit 547" "Low,High"
bitfld.long 0x00 2. "  SPIS546 ,SPI Status Bit 546" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS545 ,SPI Status Bit 545" "Low,High"
bitfld.long 0x00 0. "  SPIS544 ,SPI Status Bit 544" "Low,High"
else
hgroup.long 0xC0C4++0x03
hide.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x12)
rgroup.long 0xC0C8++0x03
line.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17"
bitfld.long 0x00 31. " SPIS607 ,SPI Status Bit 607" "Low,High"
bitfld.long 0x00 30. "  SPIS606 ,SPI Status Bit 606" "Low,High"
bitfld.long 0x00 29. "  SPIS605 ,SPI Status Bit 605" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS604 ,SPI Status Bit 604" "Low,High"
bitfld.long 0x00 27. "  SPIS603 ,SPI Status Bit 603" "Low,High"
bitfld.long 0x00 26. "  SPIS602 ,SPI Status Bit 602" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS601 ,SPI Status Bit 601" "Low,High"
bitfld.long 0x00 24. "  SPIS600 ,SPI Status Bit 600" "Low,High"
bitfld.long 0x00 23. "  SPIS599 ,SPI Status Bit 599" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS598 ,SPI Status Bit 598" "Low,High"
bitfld.long 0x00 21. "  SPIS597 ,SPI Status Bit 597" "Low,High"
bitfld.long 0x00 20. "  SPIS596 ,SPI Status Bit 596" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS595 ,SPI Status Bit 595" "Low,High"
bitfld.long 0x00 18. "  SPIS594 ,SPI Status Bit 594" "Low,High"
bitfld.long 0x00 17. "  SPIS593 ,SPI Status Bit 593" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS592 ,SPI Status Bit 592" "Low,High"
bitfld.long 0x00 15. "  SPIS591 ,SPI Status Bit 591" "Low,High"
bitfld.long 0x00 14. "  SPIS590 ,SPI Status Bit 590" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS589 ,SPI Status Bit 589" "Low,High"
bitfld.long 0x00 12. "  SPIS588 ,SPI Status Bit 588" "Low,High"
bitfld.long 0x00 11. "  SPIS587 ,SPI Status Bit 587" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS586 ,SPI Status Bit 586" "Low,High"
bitfld.long 0x00 9. "  SPIS585 ,SPI Status Bit 585" "Low,High"
bitfld.long 0x00 8. "  SPIS584 ,SPI Status Bit 584" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS583 ,SPI Status Bit 583" "Low,High"
bitfld.long 0x00 6. "  SPIS582 ,SPI Status Bit 582" "Low,High"
bitfld.long 0x00 5. "  SPIS581 ,SPI Status Bit 581" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS580 ,SPI Status Bit 580" "Low,High"
bitfld.long 0x00 3. "  SPIS579 ,SPI Status Bit 579" "Low,High"
bitfld.long 0x00 2. "  SPIS578 ,SPI Status Bit 578" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS577 ,SPI Status Bit 577" "Low,High"
bitfld.long 0x00 0. "  SPIS576 ,SPI Status Bit 576" "Low,High"
else
hgroup.long 0xC0C8++0x03
hide.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x13)
rgroup.long 0xC0CC++0x03
line.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18"
bitfld.long 0x00 31. " SPIS639 ,SPI Status Bit 639" "Low,High"
bitfld.long 0x00 30. "  SPIS638 ,SPI Status Bit 638" "Low,High"
bitfld.long 0x00 29. "  SPIS637 ,SPI Status Bit 637" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS636 ,SPI Status Bit 636" "Low,High"
bitfld.long 0x00 27. "  SPIS635 ,SPI Status Bit 635" "Low,High"
bitfld.long 0x00 26. "  SPIS634 ,SPI Status Bit 634" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS633 ,SPI Status Bit 633" "Low,High"
bitfld.long 0x00 24. "  SPIS632 ,SPI Status Bit 632" "Low,High"
bitfld.long 0x00 23. "  SPIS631 ,SPI Status Bit 631" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS630 ,SPI Status Bit 630" "Low,High"
bitfld.long 0x00 21. "  SPIS629 ,SPI Status Bit 629" "Low,High"
bitfld.long 0x00 20. "  SPIS628 ,SPI Status Bit 628" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS627 ,SPI Status Bit 627" "Low,High"
bitfld.long 0x00 18. "  SPIS626 ,SPI Status Bit 626" "Low,High"
bitfld.long 0x00 17. "  SPIS625 ,SPI Status Bit 625" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS624 ,SPI Status Bit 624" "Low,High"
bitfld.long 0x00 15. "  SPIS623 ,SPI Status Bit 623" "Low,High"
bitfld.long 0x00 14. "  SPIS622 ,SPI Status Bit 622" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS621 ,SPI Status Bit 621" "Low,High"
bitfld.long 0x00 12. "  SPIS620 ,SPI Status Bit 620" "Low,High"
bitfld.long 0x00 11. "  SPIS619 ,SPI Status Bit 619" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS618 ,SPI Status Bit 618" "Low,High"
bitfld.long 0x00 9. "  SPIS617 ,SPI Status Bit 617" "Low,High"
bitfld.long 0x00 8. "  SPIS616 ,SPI Status Bit 616" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS615 ,SPI Status Bit 615" "Low,High"
bitfld.long 0x00 6. "  SPIS614 ,SPI Status Bit 614" "Low,High"
bitfld.long 0x00 5. "  SPIS613 ,SPI Status Bit 613" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS612 ,SPI Status Bit 612" "Low,High"
bitfld.long 0x00 3. "  SPIS611 ,SPI Status Bit 611" "Low,High"
bitfld.long 0x00 2. "  SPIS610 ,SPI Status Bit 610" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS609 ,SPI Status Bit 609" "Low,High"
bitfld.long 0x00 0. "  SPIS608 ,SPI Status Bit 608" "Low,High"
else
hgroup.long 0xC0CC++0x03
hide.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x14)
rgroup.long 0xC0D0++0x03
line.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19"
bitfld.long 0x00 31. " SPIS671 ,SPI Status Bit 671" "Low,High"
bitfld.long 0x00 30. "  SPIS670 ,SPI Status Bit 670" "Low,High"
bitfld.long 0x00 29. "  SPIS669 ,SPI Status Bit 669" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS668 ,SPI Status Bit 668" "Low,High"
bitfld.long 0x00 27. "  SPIS667 ,SPI Status Bit 667" "Low,High"
bitfld.long 0x00 26. "  SPIS666 ,SPI Status Bit 666" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS665 ,SPI Status Bit 665" "Low,High"
bitfld.long 0x00 24. "  SPIS664 ,SPI Status Bit 664" "Low,High"
bitfld.long 0x00 23. "  SPIS663 ,SPI Status Bit 663" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS662 ,SPI Status Bit 662" "Low,High"
bitfld.long 0x00 21. "  SPIS661 ,SPI Status Bit 661" "Low,High"
bitfld.long 0x00 20. "  SPIS660 ,SPI Status Bit 660" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS659 ,SPI Status Bit 659" "Low,High"
bitfld.long 0x00 18. "  SPIS658 ,SPI Status Bit 658" "Low,High"
bitfld.long 0x00 17. "  SPIS657 ,SPI Status Bit 657" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS656 ,SPI Status Bit 656" "Low,High"
bitfld.long 0x00 15. "  SPIS655 ,SPI Status Bit 655" "Low,High"
bitfld.long 0x00 14. "  SPIS654 ,SPI Status Bit 654" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS653 ,SPI Status Bit 653" "Low,High"
bitfld.long 0x00 12. "  SPIS652 ,SPI Status Bit 652" "Low,High"
bitfld.long 0x00 11. "  SPIS651 ,SPI Status Bit 651" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS650 ,SPI Status Bit 650" "Low,High"
bitfld.long 0x00 9. "  SPIS649 ,SPI Status Bit 649" "Low,High"
bitfld.long 0x00 8. "  SPIS648 ,SPI Status Bit 648" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS647 ,SPI Status Bit 647" "Low,High"
bitfld.long 0x00 6. "  SPIS646 ,SPI Status Bit 646" "Low,High"
bitfld.long 0x00 5. "  SPIS645 ,SPI Status Bit 645" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS644 ,SPI Status Bit 644" "Low,High"
bitfld.long 0x00 3. "  SPIS643 ,SPI Status Bit 643" "Low,High"
bitfld.long 0x00 2. "  SPIS642 ,SPI Status Bit 642" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS641 ,SPI Status Bit 641" "Low,High"
bitfld.long 0x00 0. "  SPIS640 ,SPI Status Bit 640" "Low,High"
else
hgroup.long 0xC0D0++0x03
hide.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x15)
rgroup.long 0xC0D4++0x03
line.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20"
bitfld.long 0x00 31. " SPIS703 ,SPI Status Bit 703" "Low,High"
bitfld.long 0x00 30. "  SPIS702 ,SPI Status Bit 702" "Low,High"
bitfld.long 0x00 29. "  SPIS701 ,SPI Status Bit 701" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS700 ,SPI Status Bit 700" "Low,High"
bitfld.long 0x00 27. "  SPIS699 ,SPI Status Bit 699" "Low,High"
bitfld.long 0x00 26. "  SPIS698 ,SPI Status Bit 698" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS697 ,SPI Status Bit 697" "Low,High"
bitfld.long 0x00 24. "  SPIS696 ,SPI Status Bit 696" "Low,High"
bitfld.long 0x00 23. "  SPIS695 ,SPI Status Bit 695" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS694 ,SPI Status Bit 694" "Low,High"
bitfld.long 0x00 21. "  SPIS693 ,SPI Status Bit 693" "Low,High"
bitfld.long 0x00 20. "  SPIS692 ,SPI Status Bit 692" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS691 ,SPI Status Bit 691" "Low,High"
bitfld.long 0x00 18. "  SPIS690 ,SPI Status Bit 690" "Low,High"
bitfld.long 0x00 17. "  SPIS689 ,SPI Status Bit 689" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS688 ,SPI Status Bit 688" "Low,High"
bitfld.long 0x00 15. "  SPIS687 ,SPI Status Bit 687" "Low,High"
bitfld.long 0x00 14. "  SPIS686 ,SPI Status Bit 686" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS685 ,SPI Status Bit 685" "Low,High"
bitfld.long 0x00 12. "  SPIS684 ,SPI Status Bit 684" "Low,High"
bitfld.long 0x00 11. "  SPIS683 ,SPI Status Bit 683" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS682 ,SPI Status Bit 682" "Low,High"
bitfld.long 0x00 9. "  SPIS681 ,SPI Status Bit 681" "Low,High"
bitfld.long 0x00 8. "  SPIS680 ,SPI Status Bit 680" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS679 ,SPI Status Bit 679" "Low,High"
bitfld.long 0x00 6. "  SPIS678 ,SPI Status Bit 678" "Low,High"
bitfld.long 0x00 5. "  SPIS677 ,SPI Status Bit 677" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS676 ,SPI Status Bit 676" "Low,High"
bitfld.long 0x00 3. "  SPIS675 ,SPI Status Bit 675" "Low,High"
bitfld.long 0x00 2. "  SPIS674 ,SPI Status Bit 674" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS673 ,SPI Status Bit 673" "Low,High"
bitfld.long 0x00 0. "  SPIS672 ,SPI Status Bit 672" "Low,High"
else
hgroup.long 0xC0D4++0x03
hide.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x16)
rgroup.long 0xC0D8++0x03
line.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21"
bitfld.long 0x00 31. " SPIS735 ,SPI Status Bit 735" "Low,High"
bitfld.long 0x00 30. "  SPIS734 ,SPI Status Bit 734" "Low,High"
bitfld.long 0x00 29. "  SPIS733 ,SPI Status Bit 733" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS732 ,SPI Status Bit 732" "Low,High"
bitfld.long 0x00 27. "  SPIS731 ,SPI Status Bit 731" "Low,High"
bitfld.long 0x00 26. "  SPIS730 ,SPI Status Bit 730" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS729 ,SPI Status Bit 729" "Low,High"
bitfld.long 0x00 24. "  SPIS728 ,SPI Status Bit 728" "Low,High"
bitfld.long 0x00 23. "  SPIS727 ,SPI Status Bit 727" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS726 ,SPI Status Bit 726" "Low,High"
bitfld.long 0x00 21. "  SPIS725 ,SPI Status Bit 725" "Low,High"
bitfld.long 0x00 20. "  SPIS724 ,SPI Status Bit 724" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS723 ,SPI Status Bit 723" "Low,High"
bitfld.long 0x00 18. "  SPIS722 ,SPI Status Bit 722" "Low,High"
bitfld.long 0x00 17. "  SPIS721 ,SPI Status Bit 721" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS720 ,SPI Status Bit 720" "Low,High"
bitfld.long 0x00 15. "  SPIS719 ,SPI Status Bit 719" "Low,High"
bitfld.long 0x00 14. "  SPIS718 ,SPI Status Bit 718" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS717 ,SPI Status Bit 717" "Low,High"
bitfld.long 0x00 12. "  SPIS716 ,SPI Status Bit 716" "Low,High"
bitfld.long 0x00 11. "  SPIS715 ,SPI Status Bit 715" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS714 ,SPI Status Bit 714" "Low,High"
bitfld.long 0x00 9. "  SPIS713 ,SPI Status Bit 713" "Low,High"
bitfld.long 0x00 8. "  SPIS712 ,SPI Status Bit 712" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS711 ,SPI Status Bit 711" "Low,High"
bitfld.long 0x00 6. "  SPIS710 ,SPI Status Bit 710" "Low,High"
bitfld.long 0x00 5. "  SPIS709 ,SPI Status Bit 709" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS708 ,SPI Status Bit 708" "Low,High"
bitfld.long 0x00 3. "  SPIS707 ,SPI Status Bit 707" "Low,High"
bitfld.long 0x00 2. "  SPIS706 ,SPI Status Bit 706" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS705 ,SPI Status Bit 705" "Low,High"
bitfld.long 0x00 0. "  SPIS704 ,SPI Status Bit 704" "Low,High"
else
hgroup.long 0xC0D8++0x03
hide.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x17)
rgroup.long 0xC0DC++0x03
line.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22"
bitfld.long 0x00 31. " SPIS767 ,SPI Status Bit 767" "Low,High"
bitfld.long 0x00 30. "  SPIS766 ,SPI Status Bit 766" "Low,High"
bitfld.long 0x00 29. "  SPIS765 ,SPI Status Bit 765" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS764 ,SPI Status Bit 764" "Low,High"
bitfld.long 0x00 27. "  SPIS763 ,SPI Status Bit 763" "Low,High"
bitfld.long 0x00 26. "  SPIS762 ,SPI Status Bit 762" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS761 ,SPI Status Bit 761" "Low,High"
bitfld.long 0x00 24. "  SPIS760 ,SPI Status Bit 760" "Low,High"
bitfld.long 0x00 23. "  SPIS759 ,SPI Status Bit 759" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS758 ,SPI Status Bit 758" "Low,High"
bitfld.long 0x00 21. "  SPIS757 ,SPI Status Bit 757" "Low,High"
bitfld.long 0x00 20. "  SPIS756 ,SPI Status Bit 756" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS755 ,SPI Status Bit 755" "Low,High"
bitfld.long 0x00 18. "  SPIS754 ,SPI Status Bit 754" "Low,High"
bitfld.long 0x00 17. "  SPIS753 ,SPI Status Bit 753" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS752 ,SPI Status Bit 752" "Low,High"
bitfld.long 0x00 15. "  SPIS751 ,SPI Status Bit 751" "Low,High"
bitfld.long 0x00 14. "  SPIS750 ,SPI Status Bit 750" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS749 ,SPI Status Bit 749" "Low,High"
bitfld.long 0x00 12. "  SPIS748 ,SPI Status Bit 748" "Low,High"
bitfld.long 0x00 11. "  SPIS747 ,SPI Status Bit 747" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS746 ,SPI Status Bit 746" "Low,High"
bitfld.long 0x00 9. "  SPIS745 ,SPI Status Bit 745" "Low,High"
bitfld.long 0x00 8. "  SPIS744 ,SPI Status Bit 744" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS743 ,SPI Status Bit 743" "Low,High"
bitfld.long 0x00 6. "  SPIS742 ,SPI Status Bit 742" "Low,High"
bitfld.long 0x00 5. "  SPIS741 ,SPI Status Bit 741" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS740 ,SPI Status Bit 740" "Low,High"
bitfld.long 0x00 3. "  SPIS739 ,SPI Status Bit 739" "Low,High"
bitfld.long 0x00 2. "  SPIS738 ,SPI Status Bit 738" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS737 ,SPI Status Bit 737" "Low,High"
bitfld.long 0x00 0. "  SPIS736 ,SPI Status Bit 736" "Low,High"
else
hgroup.long 0xC0DC++0x03
hide.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x18)
rgroup.long 0xC0E0++0x03
line.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23"
bitfld.long 0x00 31. " SPIS799 ,SPI Status Bit 799" "Low,High"
bitfld.long 0x00 30. "  SPIS798 ,SPI Status Bit 798" "Low,High"
bitfld.long 0x00 29. "  SPIS797 ,SPI Status Bit 797" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS796 ,SPI Status Bit 796" "Low,High"
bitfld.long 0x00 27. "  SPIS795 ,SPI Status Bit 795" "Low,High"
bitfld.long 0x00 26. "  SPIS794 ,SPI Status Bit 794" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS793 ,SPI Status Bit 793" "Low,High"
bitfld.long 0x00 24. "  SPIS792 ,SPI Status Bit 792" "Low,High"
bitfld.long 0x00 23. "  SPIS791 ,SPI Status Bit 791" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS790 ,SPI Status Bit 790" "Low,High"
bitfld.long 0x00 21. "  SPIS789 ,SPI Status Bit 789" "Low,High"
bitfld.long 0x00 20. "  SPIS788 ,SPI Status Bit 788" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS787 ,SPI Status Bit 787" "Low,High"
bitfld.long 0x00 18. "  SPIS786 ,SPI Status Bit 786" "Low,High"
bitfld.long 0x00 17. "  SPIS785 ,SPI Status Bit 785" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS784 ,SPI Status Bit 784" "Low,High"
bitfld.long 0x00 15. "  SPIS783 ,SPI Status Bit 783" "Low,High"
bitfld.long 0x00 14. "  SPIS782 ,SPI Status Bit 782" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS781 ,SPI Status Bit 781" "Low,High"
bitfld.long 0x00 12. "  SPIS780 ,SPI Status Bit 780" "Low,High"
bitfld.long 0x00 11. "  SPIS779 ,SPI Status Bit 779" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS778 ,SPI Status Bit 778" "Low,High"
bitfld.long 0x00 9. "  SPIS777 ,SPI Status Bit 777" "Low,High"
bitfld.long 0x00 8. "  SPIS776 ,SPI Status Bit 776" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS775 ,SPI Status Bit 775" "Low,High"
bitfld.long 0x00 6. "  SPIS774 ,SPI Status Bit 774" "Low,High"
bitfld.long 0x00 5. "  SPIS773 ,SPI Status Bit 773" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS772 ,SPI Status Bit 772" "Low,High"
bitfld.long 0x00 3. "  SPIS771 ,SPI Status Bit 771" "Low,High"
bitfld.long 0x00 2. "  SPIS770 ,SPI Status Bit 770" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS769 ,SPI Status Bit 769" "Low,High"
bitfld.long 0x00 0. "  SPIS768 ,SPI Status Bit 768" "Low,High"
else
hgroup.long 0xC0E0++0x03
hide.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x19)
rgroup.long 0xC0E4++0x03
line.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24"
bitfld.long 0x00 31. " SPIS831 ,SPI Status Bit 831" "Low,High"
bitfld.long 0x00 30. "  SPIS830 ,SPI Status Bit 830" "Low,High"
bitfld.long 0x00 29. "  SPIS829 ,SPI Status Bit 829" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS828 ,SPI Status Bit 828" "Low,High"
bitfld.long 0x00 27. "  SPIS827 ,SPI Status Bit 827" "Low,High"
bitfld.long 0x00 26. "  SPIS826 ,SPI Status Bit 826" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS825 ,SPI Status Bit 825" "Low,High"
bitfld.long 0x00 24. "  SPIS824 ,SPI Status Bit 824" "Low,High"
bitfld.long 0x00 23. "  SPIS823 ,SPI Status Bit 823" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS822 ,SPI Status Bit 822" "Low,High"
bitfld.long 0x00 21. "  SPIS821 ,SPI Status Bit 821" "Low,High"
bitfld.long 0x00 20. "  SPIS820 ,SPI Status Bit 820" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS819 ,SPI Status Bit 819" "Low,High"
bitfld.long 0x00 18. "  SPIS818 ,SPI Status Bit 818" "Low,High"
bitfld.long 0x00 17. "  SPIS817 ,SPI Status Bit 817" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS816 ,SPI Status Bit 816" "Low,High"
bitfld.long 0x00 15. "  SPIS815 ,SPI Status Bit 815" "Low,High"
bitfld.long 0x00 14. "  SPIS814 ,SPI Status Bit 814" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS813 ,SPI Status Bit 813" "Low,High"
bitfld.long 0x00 12. "  SPIS812 ,SPI Status Bit 812" "Low,High"
bitfld.long 0x00 11. "  SPIS811 ,SPI Status Bit 811" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS810 ,SPI Status Bit 810" "Low,High"
bitfld.long 0x00 9. "  SPIS809 ,SPI Status Bit 809" "Low,High"
bitfld.long 0x00 8. "  SPIS808 ,SPI Status Bit 808" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS807 ,SPI Status Bit 807" "Low,High"
bitfld.long 0x00 6. "  SPIS806 ,SPI Status Bit 806" "Low,High"
bitfld.long 0x00 5. "  SPIS805 ,SPI Status Bit 805" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS804 ,SPI Status Bit 804" "Low,High"
bitfld.long 0x00 3. "  SPIS803 ,SPI Status Bit 803" "Low,High"
bitfld.long 0x00 2. "  SPIS802 ,SPI Status Bit 802" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS801 ,SPI Status Bit 801" "Low,High"
bitfld.long 0x00 0. "  SPIS800 ,SPI Status Bit 800" "Low,High"
else
hgroup.long 0xC0E4++0x03
hide.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1A)
rgroup.long 0xC0E8++0x03
line.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25"
bitfld.long 0x00 31. " SPIS863 ,SPI Status Bit 863" "Low,High"
bitfld.long 0x00 30. "  SPIS862 ,SPI Status Bit 862" "Low,High"
bitfld.long 0x00 29. "  SPIS861 ,SPI Status Bit 861" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS860 ,SPI Status Bit 860" "Low,High"
bitfld.long 0x00 27. "  SPIS859 ,SPI Status Bit 859" "Low,High"
bitfld.long 0x00 26. "  SPIS858 ,SPI Status Bit 858" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS857 ,SPI Status Bit 857" "Low,High"
bitfld.long 0x00 24. "  SPIS856 ,SPI Status Bit 856" "Low,High"
bitfld.long 0x00 23. "  SPIS855 ,SPI Status Bit 855" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS854 ,SPI Status Bit 854" "Low,High"
bitfld.long 0x00 21. "  SPIS853 ,SPI Status Bit 853" "Low,High"
bitfld.long 0x00 20. "  SPIS852 ,SPI Status Bit 852" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS851 ,SPI Status Bit 851" "Low,High"
bitfld.long 0x00 18. "  SPIS850 ,SPI Status Bit 850" "Low,High"
bitfld.long 0x00 17. "  SPIS849 ,SPI Status Bit 849" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS848 ,SPI Status Bit 848" "Low,High"
bitfld.long 0x00 15. "  SPIS847 ,SPI Status Bit 847" "Low,High"
bitfld.long 0x00 14. "  SPIS846 ,SPI Status Bit 846" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS845 ,SPI Status Bit 845" "Low,High"
bitfld.long 0x00 12. "  SPIS844 ,SPI Status Bit 844" "Low,High"
bitfld.long 0x00 11. "  SPIS843 ,SPI Status Bit 843" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS842 ,SPI Status Bit 842" "Low,High"
bitfld.long 0x00 9. "  SPIS841 ,SPI Status Bit 841" "Low,High"
bitfld.long 0x00 8. "  SPIS840 ,SPI Status Bit 840" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS839 ,SPI Status Bit 839" "Low,High"
bitfld.long 0x00 6. "  SPIS838 ,SPI Status Bit 838" "Low,High"
bitfld.long 0x00 5. "  SPIS837 ,SPI Status Bit 837" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS836 ,SPI Status Bit 836" "Low,High"
bitfld.long 0x00 3. "  SPIS835 ,SPI Status Bit 835" "Low,High"
bitfld.long 0x00 2. "  SPIS834 ,SPI Status Bit 834" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS833 ,SPI Status Bit 833" "Low,High"
bitfld.long 0x00 0. "  SPIS832 ,SPI Status Bit 832" "Low,High"
else
hgroup.long 0xC0E8++0x03
hide.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1B)
rgroup.long 0xC0EC++0x03
line.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26"
bitfld.long 0x00 31. " SPIS895 ,SPI Status Bit 895" "Low,High"
bitfld.long 0x00 30. "  SPIS894 ,SPI Status Bit 894" "Low,High"
bitfld.long 0x00 29. "  SPIS893 ,SPI Status Bit 893" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS892 ,SPI Status Bit 892" "Low,High"
bitfld.long 0x00 27. "  SPIS891 ,SPI Status Bit 891" "Low,High"
bitfld.long 0x00 26. "  SPIS890 ,SPI Status Bit 890" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS889 ,SPI Status Bit 889" "Low,High"
bitfld.long 0x00 24. "  SPIS888 ,SPI Status Bit 888" "Low,High"
bitfld.long 0x00 23. "  SPIS887 ,SPI Status Bit 887" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS886 ,SPI Status Bit 886" "Low,High"
bitfld.long 0x00 21. "  SPIS885 ,SPI Status Bit 885" "Low,High"
bitfld.long 0x00 20. "  SPIS884 ,SPI Status Bit 884" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS883 ,SPI Status Bit 883" "Low,High"
bitfld.long 0x00 18. "  SPIS882 ,SPI Status Bit 882" "Low,High"
bitfld.long 0x00 17. "  SPIS881 ,SPI Status Bit 881" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS880 ,SPI Status Bit 880" "Low,High"
bitfld.long 0x00 15. "  SPIS879 ,SPI Status Bit 879" "Low,High"
bitfld.long 0x00 14. "  SPIS878 ,SPI Status Bit 878" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS877 ,SPI Status Bit 877" "Low,High"
bitfld.long 0x00 12. "  SPIS876 ,SPI Status Bit 876" "Low,High"
bitfld.long 0x00 11. "  SPIS875 ,SPI Status Bit 875" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS874 ,SPI Status Bit 874" "Low,High"
bitfld.long 0x00 9. "  SPIS873 ,SPI Status Bit 873" "Low,High"
bitfld.long 0x00 8. "  SPIS872 ,SPI Status Bit 872" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS871 ,SPI Status Bit 871" "Low,High"
bitfld.long 0x00 6. "  SPIS870 ,SPI Status Bit 870" "Low,High"
bitfld.long 0x00 5. "  SPIS869 ,SPI Status Bit 869" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS868 ,SPI Status Bit 868" "Low,High"
bitfld.long 0x00 3. "  SPIS867 ,SPI Status Bit 867" "Low,High"
bitfld.long 0x00 2. "  SPIS866 ,SPI Status Bit 866" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS865 ,SPI Status Bit 865" "Low,High"
bitfld.long 0x00 0. "  SPIS864 ,SPI Status Bit 864" "Low,High"
else
hgroup.long 0xC0EC++0x03
hide.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1C)
rgroup.long 0xC0F0++0x03
line.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27"
bitfld.long 0x00 31. " SPIS927 ,SPI Status Bit 927" "Low,High"
bitfld.long 0x00 30. "  SPIS926 ,SPI Status Bit 926" "Low,High"
bitfld.long 0x00 29. "  SPIS925 ,SPI Status Bit 925" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS924 ,SPI Status Bit 924" "Low,High"
bitfld.long 0x00 27. "  SPIS923 ,SPI Status Bit 923" "Low,High"
bitfld.long 0x00 26. "  SPIS922 ,SPI Status Bit 922" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS921 ,SPI Status Bit 921" "Low,High"
bitfld.long 0x00 24. "  SPIS920 ,SPI Status Bit 920" "Low,High"
bitfld.long 0x00 23. "  SPIS919 ,SPI Status Bit 919" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS918 ,SPI Status Bit 918" "Low,High"
bitfld.long 0x00 21. "  SPIS917 ,SPI Status Bit 917" "Low,High"
bitfld.long 0x00 20. "  SPIS916 ,SPI Status Bit 916" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS915 ,SPI Status Bit 915" "Low,High"
bitfld.long 0x00 18. "  SPIS914 ,SPI Status Bit 914" "Low,High"
bitfld.long 0x00 17. "  SPIS913 ,SPI Status Bit 913" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS912 ,SPI Status Bit 912" "Low,High"
bitfld.long 0x00 15. "  SPIS911 ,SPI Status Bit 911" "Low,High"
bitfld.long 0x00 14. "  SPIS910 ,SPI Status Bit 910" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS909 ,SPI Status Bit 909" "Low,High"
bitfld.long 0x00 12. "  SPIS908 ,SPI Status Bit 908" "Low,High"
bitfld.long 0x00 11. "  SPIS907 ,SPI Status Bit 907" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS906 ,SPI Status Bit 906" "Low,High"
bitfld.long 0x00 9. "  SPIS905 ,SPI Status Bit 905" "Low,High"
bitfld.long 0x00 8. "  SPIS904 ,SPI Status Bit 904" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS903 ,SPI Status Bit 903" "Low,High"
bitfld.long 0x00 6. "  SPIS902 ,SPI Status Bit 902" "Low,High"
bitfld.long 0x00 5. "  SPIS901 ,SPI Status Bit 901" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS900 ,SPI Status Bit 900" "Low,High"
bitfld.long 0x00 3. "  SPIS899 ,SPI Status Bit 899" "Low,High"
bitfld.long 0x00 2. "  SPIS898 ,SPI Status Bit 898" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS897 ,SPI Status Bit 897" "Low,High"
bitfld.long 0x00 0. "  SPIS896 ,SPI Status Bit 896" "Low,High"
else
hgroup.long 0xC0F0++0x03
hide.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1D)
rgroup.long 0xC0F4++0x03
line.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28"
bitfld.long 0x00 31. " SPIS959 ,SPI Status Bit 959" "Low,High"
bitfld.long 0x00 30. "  SPIS958 ,SPI Status Bit 958" "Low,High"
bitfld.long 0x00 29. "  SPIS957 ,SPI Status Bit 957" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS956 ,SPI Status Bit 956" "Low,High"
bitfld.long 0x00 27. "  SPIS955 ,SPI Status Bit 955" "Low,High"
bitfld.long 0x00 26. "  SPIS954 ,SPI Status Bit 954" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS953 ,SPI Status Bit 953" "Low,High"
bitfld.long 0x00 24. "  SPIS952 ,SPI Status Bit 952" "Low,High"
bitfld.long 0x00 23. "  SPIS951 ,SPI Status Bit 951" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS950 ,SPI Status Bit 950" "Low,High"
bitfld.long 0x00 21. "  SPIS949 ,SPI Status Bit 949" "Low,High"
bitfld.long 0x00 20. "  SPIS948 ,SPI Status Bit 948" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS947 ,SPI Status Bit 947" "Low,High"
bitfld.long 0x00 18. "  SPIS946 ,SPI Status Bit 946" "Low,High"
bitfld.long 0x00 17. "  SPIS945 ,SPI Status Bit 945" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS944 ,SPI Status Bit 944" "Low,High"
bitfld.long 0x00 15. "  SPIS943 ,SPI Status Bit 943" "Low,High"
bitfld.long 0x00 14. "  SPIS942 ,SPI Status Bit 942" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS941 ,SPI Status Bit 941" "Low,High"
bitfld.long 0x00 12. "  SPIS940 ,SPI Status Bit 940" "Low,High"
bitfld.long 0x00 11. "  SPIS939 ,SPI Status Bit 939" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS938 ,SPI Status Bit 938" "Low,High"
bitfld.long 0x00 9. "  SPIS937 ,SPI Status Bit 937" "Low,High"
bitfld.long 0x00 8. "  SPIS936 ,SPI Status Bit 936" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS935 ,SPI Status Bit 935" "Low,High"
bitfld.long 0x00 6. "  SPIS934 ,SPI Status Bit 934" "Low,High"
bitfld.long 0x00 5. "  SPIS933 ,SPI Status Bit 933" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS932 ,SPI Status Bit 932" "Low,High"
bitfld.long 0x00 3. "  SPIS931 ,SPI Status Bit 931" "Low,High"
bitfld.long 0x00 2. "  SPIS930 ,SPI Status Bit 930" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS929 ,SPI Status Bit 929" "Low,High"
bitfld.long 0x00 0. "  SPIS928 ,SPI Status Bit 928" "Low,High"
else
hgroup.long 0xC0F4++0x03
hide.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28"
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x0000001F)>=0x1E)
rgroup.long 0xC0F8++0x03
line.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29"
bitfld.long 0x00 31. " SPIS991 ,SPI Status Bit 991" "Low,High"
bitfld.long 0x00 30. "  SPIS990 ,SPI Status Bit 990" "Low,High"
bitfld.long 0x00 29. "  SPIS989 ,SPI Status Bit 989" "Low,High"
textline "                               "
bitfld.long 0x00 28. " SPIS988 ,SPI Status Bit 988" "Low,High"
bitfld.long 0x00 27. "  SPIS987 ,SPI Status Bit 987" "Low,High"
bitfld.long 0x00 26. "  SPIS986 ,SPI Status Bit 986" "Low,High"
textline "                               "
bitfld.long 0x00 25. " SPIS985 ,SPI Status Bit 985" "Low,High"
bitfld.long 0x00 24. "  SPIS984 ,SPI Status Bit 984" "Low,High"
bitfld.long 0x00 23. "  SPIS983 ,SPI Status Bit 983" "Low,High"
textline "                               "
bitfld.long 0x00 22. " SPIS982 ,SPI Status Bit 982" "Low,High"
bitfld.long 0x00 21. "  SPIS981 ,SPI Status Bit 981" "Low,High"
bitfld.long 0x00 20. "  SPIS980 ,SPI Status Bit 980" "Low,High"
textline "                               "
bitfld.long 0x00 19. " SPIS979 ,SPI Status Bit 979" "Low,High"
bitfld.long 0x00 18. "  SPIS978 ,SPI Status Bit 978" "Low,High"
bitfld.long 0x00 17. "  SPIS977 ,SPI Status Bit 977" "Low,High"
textline "                               "
bitfld.long 0x00 16. " SPIS976 ,SPI Status Bit 976" "Low,High"
bitfld.long 0x00 15. "  SPIS975 ,SPI Status Bit 975" "Low,High"
bitfld.long 0x00 14. "  SPIS974 ,SPI Status Bit 974" "Low,High"
textline "                               "
bitfld.long 0x00 13. " SPIS973 ,SPI Status Bit 973" "Low,High"
bitfld.long 0x00 12. "  SPIS972 ,SPI Status Bit 972" "Low,High"
bitfld.long 0x00 11. "  SPIS971 ,SPI Status Bit 971" "Low,High"
textline "                               "
bitfld.long 0x00 10. " SPIS970 ,SPI Status Bit 970" "Low,High"
bitfld.long 0x00 9. "  SPIS969 ,SPI Status Bit 969" "Low,High"
bitfld.long 0x00 8. "  SPIS968 ,SPI Status Bit 968" "Low,High"
textline "                               "
bitfld.long 0x00 7. " SPIS967 ,SPI Status Bit 967" "Low,High"
bitfld.long 0x00 6. "  SPIS966 ,SPI Status Bit 966" "Low,High"
bitfld.long 0x00 5. "  SPIS965 ,SPI Status Bit 965" "Low,High"
textline "                               "
bitfld.long 0x00 4. " SPIS964 ,SPI Status Bit 964" "Low,High"
bitfld.long 0x00 3. "  SPIS963 ,SPI Status Bit 963" "Low,High"
bitfld.long 0x00 2. "  SPIS962 ,SPI Status Bit 962" "Low,High"
textline "                               "
bitfld.long 0x00 1. " SPIS961 ,SPI Status Bit 961" "Low,High"
bitfld.long 0x00 0. "  SPIS960 ,SPI Status Bit 960" "Low,High"
else
hgroup.long 0xC0F8++0x03
hide.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29"
endif
tree.end
width 12.
tree "Peripheral/Component ID Registers"
rgroup.long 0xFFE0++0x03
line.long 0x00 "GICD_PIDR0,Peripheral ID0 Register"
hexmask.long.byte 0x00 0.--7. 1. " PART_0  ,Part number[7:0]"
rgroup.long 0xFFE4++0x03
line.long 0x00 "GICD_PIDR1,Peripheral ID1 Register"
bitfld.long 0x00 4.--7. " DES_1   ,JEP106 identity code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "        PART_1 ,         Part number[11:8]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xFFE8++0x03
line.long 0x00 "GICD_PIDR2,Peripheral ID2 Register"
bitfld.long 0x00 4.--7. " ARCHREV ,Identifies the version of the GIC architecture with which the GIC-500 complies" "Reserved,Reserved,Reserved,v3.0,?..."
bitfld.long 0x00 3. "  JEDEC  ,Indicates that a JEDEC-assigned JEP106 identity code is used" "Not Used,Used"
bitfld.long 0x00 0.--2. "  DES_1 ,JEP106 identity code [6:4]" "0,1,2,3,4,5,6,7"
rgroup.long 0xFFEC++0x03
line.long 0x00 "GICD_PIDR3,Peripheral ID3 Register"
bitfld.long 0x00 4.--7. " REVAND  ,Manufacturer defined revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "        CMOD   ,Indicates if the customer has modified the behavior of the component" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xFFD0++0x03
line.long 0x00 "GICD_PIDR4,Peripheral ID4 Register"
bitfld.long 0x00 4.--7. " SIZE    ,64 KB software visible page" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "        DES_2  ,ARM implementation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hgroup.long 0xFFD4++0x03
hide.long 0x00 "GICD_PIDR5,Peripheral ID5 Register"
hgroup.long 0xFFD8++0x03
hide.long 0x00 "GICD_PIDR6,Peripheral ID6 Register"
hgroup.long 0xFFDC++0x03
hide.long 0x00 "GICD_PIDR7,Peripheral ID7 Register"
rgroup.long 0xFFF0++0x03
line.long 0x00 "GICD_CIDR0,Component ID0 Register"
hexmask.long.byte 0x00 0.--7. 1. " FIXVAL  ,ARM-defined fixed values for the preamble for component discovery"
rgroup.long 0xFFF4++0x03
line.long 0x00 "GICD_CIDR1,Component ID1 Register"
hexmask.long.byte 0x00 0.--7. 1. " FIXVAL  ,ARM-defined fixed values for the preamble for component discovery"
rgroup.long 0xFFF8++0x03
line.long 0x00 "GICD_CIDR2,Component ID2 Register"
hexmask.long.byte 0x00 0.--7. 1. " FIXVAL  ,ARM-defined fixed values for the preamble for component discovery"
rgroup.long 0xFFFC++0x03
line.long 0x00 "GICD_CIDR3,Component ID3 Register"
hexmask.long.byte 0x00 0.--7. 1. " FIXVAL  ,ARM-defined fixed values for the preamble for component discovery"
tree.end
tree.end
width 0x0B
base (COMP.BASE("GICD",-1.)+0x20000)
width 24.
tree "Interrupt Translation Service"
group.long 0x00++0x03
line.long 0x00 "GITS_CTLR,ITS Control Register"
rbitfld.long 0x00 31. "         QUIESCENT              ,Indicates completion of all ITS operations" "Not quiescent,Quiescent"
bitfld.long 0x00 0. "                      ENABLED                ,Controls whether the ITS is enabled" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "GITS_IIDR,ITS Implementer Identification Register"
bitfld.long 0x00 24.--31. "         PRODID                 ,Indicates the product ID" "GIC-500,?..."
bitfld.long 0x00 16.--19. "                            VAR                    ,Major revison number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                                         "
bitfld.long 0x00 12.--15. " REV                    ,Minor revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "                                 IMP                    ,Implementer"
if (((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0008))&0x1000000000)==0x1000000000)&&(((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0008))&0xFF000000)!=0x00)
rgroup.quad 0x08++0x07
line.quad 0x00 "GITS_TYPER,ITS Type Register"
bitfld.quad 0x00 37. " VMOVP                  ,Indicates the form of the VMOVP command" "All ITSs,One ITS"
bitfld.quad 0x00 36. "                           CIL                    ,Collection ID Limit" "16-bit,GITS_TYPER.CIDBITS value"
textline "                                         "
bitfld.quad 0x00 32.--35. " CIDBITS                ,Number of Collection ID bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 24.--31. 1. "                                 HCC                    ,Hardware Collection Count"
textline "                                         "
bitfld.quad 0x00 19. " PTA                    ,Indicates the format of the target address" "GICR_TYPER.PROCESSOR_NUMBER value,Base physical address"
bitfld.quad 0x00 18. "  SEIS                   ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not suppported,Supported"
textline "                                         "
bitfld.quad 0x00 13.--17. " DEVBITS                ,The number of DeviceID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.quad 0x00 8.--12. "                                 ID_BITS                ,The number of EventID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
textline "                                         "
rbitfld.quad 0x00 4.--7. " ITT_ENTRY_SIZE         ,The number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.quad 0x00 2. "                                 CCT                    ,Cumulative Collection Tables" "0,1"
elif (((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0008))&0x1000000000)==0x1000000000)
rgroup.quad 0x08++0x07
line.quad 0x00 "GITS_TYPER,ITS Type Register"
bitfld.quad 0x00 37. " VMOVP                  ,Indicates the form of the VMOVP command" "All ITSs,One ITS"
bitfld.quad 0x00 36. "                           CIL                    ,Collection ID Limit" "16-bit,GITS_TYPER.CIDBITS value"
textline "                                         "
bitfld.quad 0x00 32.--35. " CIDBITS                ,Number of Collection ID bits minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.quad.byte 0x00 24.--31. 1. "                                 HCC                    ,Hardware Collection Count"
textline "                                         "
bitfld.quad 0x00 19. " PTA                    ,Indicates the format of the target address" "GICR_TYPER.PROCESSOR_NUMBER value,Base physical address"
bitfld.quad 0x00 18. "  SEIS                   ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not suppported,Supported"
textline "                                         "
bitfld.quad 0x00 13.--17. " DEVBITS                ,The number of DeviceID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.quad 0x00 8.--12. "                                 ID_BITS                ,The number of EventID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
textline "                                         "
rbitfld.quad 0x00 4.--7. " ITT_ENTRY_SIZE         ,The number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
elif (((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0008))&0xFF000000)!=0x00)
rgroup.quad 0x08++0x07
line.quad 0x00 "GITS_TYPER,ITS Type Register"
bitfld.quad 0x00 37. " VMOVP                  ,Indicates the form of the VMOVP command" "All ITSs,One ITS"
bitfld.quad 0x00 36. "                           CIL                    ,Collection ID Limit" "16-bit,GITS_TYPER.CIDBITS value"
textline "                                         "
hexmask.quad.byte 0x00 24.--31. 1. " HCC                    ,Hardware Collection Count"
bitfld.quad 0x00 19. "                                 PTA                    ,Indicates the format of the target address" "GICR_TYPER.PROCESSOR_NUMBER value,Base physical address"
textline "                                         "
bitfld.quad 0x00 18. " SEIS                   ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not suppported,Supported"
bitfld.quad 0x00 13.--17. "                     DEVBITS                ,The number of DeviceID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
textline "                                         "
bitfld.quad 0x00 8.--12. " ID_BITS                ,The number of EventID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rbitfld.quad 0x00 4.--7. "                                 ITT_ENTRY_SIZE         ,The number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                                         "
bitfld.quad 0x00 2. " CCT                    ,Cumulative Collection Tables" "0,1"
else
rgroup.quad 0x08++0x07
line.quad 0x00 "GITS_TYPER,ITS Type Register"
bitfld.quad 0x00 37. " VMOVP                  ,Indicates the form of the VMOVP command" "All ITSs,One ITS"
bitfld.quad 0x00 36. "                           CIL                    ,Collection ID Limit" "16-bit,GITS_TYPER.CIDBITS value"
textline "                                         "
hexmask.quad.byte 0x00 24.--31. 1. " HCC                    ,Hardware Collection Count"
bitfld.quad 0x00 19. "                                 PTA                    ,Indicates the format of the target address" "GICR_TYPER.PROCESSOR_NUMBER value,Base physical address"
textline "                                         "
bitfld.quad 0x00 18. " SEIS                   ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not suppported,Supported"
bitfld.quad 0x00 13.--17. "                     DEVBITS                ,The number of DeviceID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
textline "                                         "
bitfld.quad 0x00 8.--12. " ID_BITS                ,The number of EventID bits implemented minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rbitfld.quad 0x00 4.--7. "                                 ITT_ENTRY_SIZE         ,The number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
endif
group.quad 0x80++0x07
line.quad 0x00 "GITS_CBASER,The command queue control register"
bitfld.quad 0x00 63. " VALID                  ,Indicates whether software has allocated memory for the command queue" "Not allocated,Allocated"
bitfld.quad 0x00 59.--61. "                      INNERCACHE             ,Indicates the Inner Cacheability attributes of accesses to the command queue" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable"
textline "                                         "
bitfld.quad 0x00 53.--55. " OUTERCACHE             ,Indicates the Outer Cacheability attributes of accesses to the command queue" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable"
hexmask.quad 0x00 12.--51. 0x10 "    PHYSICAL_ADDRESS       ,Bits [51:12] of the base physical address of the command queue"
textline "                                         "
bitfld.quad 0x00 10.--11. " SHAREABILITY           ,Indicates the Shareability attributes of accesses to the command queue" "Non-shareable,Inner Shareable,Outer Shareable,?..."
hexmask.quad.byte 0x00 0.--7. 1. "                    SIZE                   ,The number of 4KB pages of physical memory allocated to the command queue minus one"
group.quad 0x88++0x7
line.quad 0x00 "GITS_CWRITER,The command queue write pointer"
hexmask.quad.word 0x00 5.--19. 0x20 " OFFSET                 ,Bits [19:5] of the offset from GITS_CBASER"
bitfld.quad 0x00 0. "                               RETRY                  ,Restarts the processing of commands by the ITS if it stalled because of a command error" "No effect,Restarted"
group.quad 0x90++0x07
line.quad 0x00 "GITS_CREADR,The command queue read pointer"
hexmask.quad.word 0x00 5.--19. 0x20 " OFFSET                 ,Bits [19:5] of the offset from GITS_CBASER"
bitfld.quad 0x00 0. "                               STALLED                ,Reports whether the processing of commands is stalled because of a command error" "Not stalled,Stalled"
if (((per.q((COMP.BASE("GICD",-1.)+0x20000)+0x0100))&0x700000000000000)==0x00)
group.quad 0x100++0x07
line.quad 0x00 "GITS_BASER0,ITS table control register"
bitfld.quad 0x00 63. " VALID                  ,Indicates whether software has allocated memory for the translation table" "Not allocated,Allocated"
bitfld.quad 0x00 62. "                      INDIRECT               ,This field indicates whether an implemented register specifies a single flat table or a two-level table where the first level contains a list of descriptors" "Single Level,Two Level"
textline "                                         "
bitfld.quad 0x00 59.--61. " INNERCACHE             ,Indicates the Inner Cacheability attributes of accesses to the table" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable"
rbitfld.quad 0x00 56.--58. "    TYPE                   ,Specifies the type of entity that requires entries in the corresponding translation table" "Unimplemented,Devices,Reserved,Reserved,Interrupt collections,?..."
textline "                                         "
bitfld.quad 0x00 53.--55. " OUTERCACHE             ,Indicates the Outer Cacheability attributes of accesses to the table" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable"
rbitfld.quad 0x00 48.--52. "    ENTRY_SIZE             ,Specifies the number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
textline "                                         "
hexmask.quad 0x00 12.--47. 1. " PHYSICAL_ADDRESS       ,Physical Address"
bitfld.quad 0x00 10.--11. "                   SHAREABILITY           ,Indicates the Shareability attributes of accesses to the table" "Non-shareable,Inner Shareable,Outer Shareable,?..."
textline "                                         "
bitfld.quad 0x00 8.--9. " PAGE_SIZE              ,The size of page that the translation table uses" "4KB,16KB,64KB,?..."
else
group.quad 0x100++0x07
line.quad 0x00 "GITS_BASER0,ITS table control register"
bitfld.quad 0x00 63. " VALID                  ,Indicates whether software has allocated memory for the translation table" "Not allocated,Allocated"
bitfld.quad 0x00 62. "                      INDIRECT               ,This field indicates whether an implemented register specifies a single flat table or a two-level table where the first level contains a list of descriptors" "Single Level,Two Level"
textline "                                         "
bitfld.quad 0x00 59.--61. " INNERCACHE             ,Indicates the Inner Cacheability attributes of accesses to the table" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable"
rbitfld.quad 0x00 56.--58. "    TYPE                   ,Specifies the type of entity that requires entries in the corresponding translation table" "Unimplemented,Devices,Reserved,Reserved,Interrupt collections,?..."
textline "                                         "
bitfld.quad 0x00 53.--55. " OUTERCACHE             ,Indicates the Outer Cacheability attributes of accesses to the table" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable"
rbitfld.quad 0x00 48.--52. "    ENTRY_SIZE             ,Specifies the number of bytes per translation table entry minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
textline "                                         "
hexmask.quad 0x00 12.--47. 0x10 " PHYSICAL_ADDRESS       ,Physical Address"
bitfld.quad 0x00 10.--11. "                   SHAREABILITY           ,Indicates the Shareability attributes of accesses to the table" "Non-shareable,Inner Shareable,Outer Shareable,?..."
textline "                                         "
bitfld.quad 0x00 8.--9. " PAGE_SIZE              ,The size of page that the translation table uses" "4KB,16KB,64KB,?..."
hexmask.quad.byte 0x00 0.--7. 1. "                               SIZE                   ,The number of pages of physical memory allocated to the table minus one"
endif
textline "                                         "
wgroup.long 0xC000++0x03
line.long 0x00 "GITS_TRKCTLR,Tracking Control Register"
bitfld.long 0x00 1. "         LPI_TRACK              ,Write 0b1 to capture information about the next interrupt that the ITS generated or failed to generate because of misprogramming" "No effect,Capture"
bitfld.long 0x00 0. "  CACHE_COUNT_RESET      ,Write 0b1 to reset the cache hit and miss counters in GITS_TRKICR and GITS_TRKLCR" "No effect,Reset"
if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x1F)==0x01)
rgroup.long 0xC004++0x03
line.long 0x00 "GITS_TRKR,Tracking Status Register"
bitfld.long 0x00 6. "         PID_OUT_OF_RANGE       ,Indicates that the LPI PID is larger than that allowed by the IDbits field in the GICR_PROPBASER" "0,1"
bitfld.long 0x00 5. "          TARGET_OUT_OF_RANGE    ,Indicates that target collection has not been successfully mapped using MAPC or that the target core does not have LPIs enabled in GICR_CTLR" "0,1"
textline "                                 "
bitfld.long 0x00 4. "         NO_TRANSLATION         ,Indicates that no valid MAPI or MAPVI has successfully been performed for this combination of input ID and Device ID" "0,1"
bitfld.long 0x00 3. "          INPUT_ID_OUT_OF_RANGE  ,Indicates that the input ID is larger than that allowed for that Device ID which is set during the MAPD command or it is larger than 65535" "0,1"
textline "                                 "
bitfld.long 0x00 2. "         DEVICE_ID_UNMAPPED     ,Indicates that no valid MAPD has successfully been performed for this Device ID" "0,1"
bitfld.long 0x00 1. "          DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1"
textline "                                 "
bitfld.long 0x00 0. "         LPI_TRACKED            ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid"
elif (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0xF)==0x01)
rgroup.long 0xC004++0x03
line.long 0x00 "GITS_TRKR,Tracking Status Register"
bitfld.long 0x00 4. "         NO_TRANSLATION         ,Indicates that no valid MAPI or MAPVI has successfully been performed for this combination of input ID and Device ID" "0,1"
bitfld.long 0x00 3. "          INPUT_ID_OUT_OF_RANGE  ,Indicates that the input ID is larger than that allowed for that Device ID which is set during the MAPD command or it is larger than 65535" "0,1"
textline "                                 "
bitfld.long 0x00 2. "         DEVICE_ID_UNMAPPED     ,Indicates that no valid MAPD has successfully been performed for this Device ID" "0,1"
bitfld.long 0x00 1. "          DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1"
textline "                                 "
bitfld.long 0x00 0. "         LPI_TRACKED            ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid"
elif (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x7)==0x01)
rgroup.long 0xC004++0x03
line.long 0x00 "GITS_TRKR,Tracking Status Register"
bitfld.long 0x00 3. "         INPUT_ID_OUT_OF_RANGE  ,Indicates that the input ID is larger than that allowed for that Device ID which is set during the MAPD command or it is larger than 65535" "0,1"
bitfld.long 0x00 2. "          DEVICE_ID_UNMAPPED     ,Indicates that no valid MAPD has successfully been performed for this Device ID" "0,1"
textline "                                 "
bitfld.long 0x00 1. "         DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1"
bitfld.long 0x00 0. "          LPI_TRACKED            ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid"
elif (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x3)==0x01)
rgroup.long 0xC004++0x03
line.long 0x00 "GITS_TRKR,Tracking Status Register"
bitfld.long 0x00 2. "         DEVICE_ID_UNMAPPED     ,Indicates that no valid MAPD has successfully been performed for this Device ID" "0,1"
bitfld.long 0x00 1. "          DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1"
textline "                                 "
bitfld.long 0x00 0. "         LPI_TRACKED            ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid"
else
rgroup.long 0xC004++0x03
line.long 0x00 "GITS_TRKR,Tracking Status Register"
bitfld.long 0x00 1. "         DEVICE_ID_OUT_OF_RANGE ,Indicates that the Device ID is larger than that allowed by the Size and Page Size in GITS_BASER0 or larger than the number of Device IDs configured" "0,1"
bitfld.long 0x00 0. "          LPI_TRACKED            ,Indicates that the LPI tracking initiated by the LPI track bit in the GITS_TRKCTLR register is completed and the contents of the Debug Tracked registers are valid" "Not valid,Valid"
endif
if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x01)==0x01)
rgroup.long 0xC008++0x03
line.long 0x00 "GITS_TRKDIDR,Debug Tracked DID Register"
hexmask.long.tbyte 0x00 0.--19. 1. "         LPI_DID                ,The Device ID for the interrupt that was tracked"
else
hgroup.long 0xC008++0x03
hide.long 0x00 "GITS_TRKDIDR,Debug Tracked DID Register"
endif
if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x7F)==0x01)
rgroup.long 0xC00C++0x03
line.long 0x00 "GITS_TRKPIDR,Debug Tracked PID Register"
hexmask.long.word 0x00 0.--15. 1. "         LPI_PID                ,The ID after translation for an interrupt that was tracked and generated an LPI successfully"
else
hgroup.long 0xC00C++0x03
hide.long 0x00 "GITS_TRKPIDR,Debug Tracked PID Register"
endif
if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x01)==0x01)
rgroup.long 0xC010++0x03
line.long 0x00 "GITS_TRKVIDR,Debug Tracked ID Register"
hexmask.long.word 0x00 0.--15. 1. "         LPI_ID                 ,The ID before translation of the interrupt that was tracked"
else
hgroup.long 0xC010++0x03
hide.long 0x00 "GITS_TRKVIDR,Debug Tracked ID Register"
endif
if (((per.l((COMP.BASE("GICD",-1.)+0x20000)+0xC004))&0x7F)==0x01)
rgroup.long 0xC014++0x03
line.long 0x00 "GITS_TRKTGTR,Debug Tracked Target Register"
hexmask.long.byte 0x00 0.--6. 1. "         LPI_TARGET_CORE        ,The target core for an interrupt that was tracked and generated an LPI successfully"
else
hgroup.long 0xC014++0x03
hide.long 0x00 "GITS_TRKTGTR,Debug Tracked Target Register"
endif
rgroup.long 0xC018++0x03
line.long 0x00 "GITS_TRKICR,Debug ITE Cache Statistics"
hexmask.long.word 0x00 16.--31. 1. "         ITE_CACHE_HITS         ,Number of hits in the ITE cache"
hexmask.long.word 0x00 0.--15. 1. "       ITE_CACHE_MISSES       ,Number of misses in the ITE cache"
rgroup.long 0xC01C++0x03
line.long 0x00 "GITS_TRKLCR,Debug LPI Cache Statistics"
hexmask.long.word 0x00 16.--31. 1. "         LPI_CACHE_HITS         ,Number of hits in the LPI cache"
hexmask.long.word 0x00 0.--15. 1. "       LPI_CACHE_MISSES       ,Number of misses in the LPI cache"
rgroup.long 0xFFE0++0x03
line.long 0x00 "GITS_PIDR0,Peripheral ID0 Register"
hexmask.long.byte 0x00 0.--7. 1. "         PART_0                 ,Part number[7:0]"
rgroup.long 0xFFE4++0x03
line.long 0x00 "GITS_PIDR1,Peripheral ID1 Register"
bitfld.long 0x00 4.--7. "         DES_1                  ,JEP106 identity code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "         PART_1                 ,         Part number[11:8]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xFFE8++0x03
line.long 0x00 "GITS_PIDR2,Peripheral ID2 Register"
bitfld.long 0x00 4.--7. "         ARCHREV                ,Identifies the version of the GIC architecture with which the GIC-500 complies" "Reserved,Reserved,Reserved,v3.0,?..."
bitfld.long 0x00 3. "   JEDEC                  ,Indicates that a JEDEC-assigned JEP106 identity code is used" "Low,High"
textline "                                 "
bitfld.long 0x00 0.--2. "         DES_1                  ,JEP106 identity code [6:4]" "0,1,2,3,4,5,6,7"
rgroup.long 0xFFEC++0x03
line.long 0x00 "GITS_PIDR3,Peripheral ID3 Register"
bitfld.long 0x00 4.--7. "         REVAND                 ,Manufacturer defined revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "         CMOD                   ,Indicates if the customer has modified the behavior of the component" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xFFD0++0x03
line.long 0x00 "GITS_PIDR4,Peripheral ID4 Register"
bitfld.long 0x00 4.--7. "         SIZE                   ,64 KB software visible page" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "         DES_2                  ,ARM implementation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hgroup.long 0xFFD4++0x03
hide.long 0x00 "GITS_PIDR5,Peripheral ID5 Register"
hgroup.long 0xFFD8++0x03
hide.long 0x00 "GITS_PIDR6,Peripheral ID6 Register"
hgroup.long 0xFFDC++0x03
hide.long 0x00 "GITS_PIDR7,Peripheral ID7 Register"
rgroup.long 0xFFF0++0x03
line.long 0x00 "GITS_CIDR0,Component ID0 Register"
hexmask.long.byte 0x00 0.--7. 1. "         FIXVAL                 ,ARM-defined fixed values for the preamble for component discovery"
rgroup.long 0xFFF4++0x03
line.long 0x00 "GITS_CIDR1,Component ID1 Register"
hexmask.long.byte 0x00 0.--7. 1. "         FIXVAL                 ,ARM-defined fixed values for the preamble for component discovery"
rgroup.long 0xFFF8++0x03
line.long 0x00 "GITS_CIDR2,Component ID2 Register"
hexmask.long.byte 0x00 0.--7. 1. "         FIXVAL                 ,ARM-defined fixed values for the preamble for component discovery"
rgroup.long 0xFFFC++0x03
line.long 0x00 "GITS_CIDR3,Component ID3 Register"
hexmask.long.byte 0x00 0.--7. 1. "         FIXVAL                 ,ARM-defined fixed values for the preamble for component discovery"
textline "                                 "
base (COMP.BASE("GICD",-1.)+0x20000)+0x10000
if (((per.l((COMP.BASE("GICD",-1.)+0x20000)))&0x01)==0x01)
wgroup.long 0x40++0x03
line.long 0x00 "GITS_TRANSLATER,ITS Translation Register"
else
hgroup.long 0x40++0x03
hide.long 0x00 "GITS_TRANSLATER,ITS Translation Register"
endif
tree.end
width 0x0B
base COMP.BASE("GICR",-1.)
width 17.
tree "Redistributor Interface"
tree "Control Registers"
if (((per.q(COMP.BASE("GICR",-1.)+0x08))&0x21)==0x21)
group.long 0x0000++0x03
line.long 0x00 "GICR_CTLR,Redistributor Control Register"
rbitfld.long 0x00 31. "         UWP       ,Upstream Write Pending. Indicates whether all upstream writes have been communicated to the Distributor" "Not pending,Pending"
bitfld.long 0x00 26. "       DPG1S          ,Disable Processor selection for Group 1 Secure interrupts" "No,Yes"
bitfld.long 0x00 25. "             DPG1NS           ,Disable Processor selection for Group 1 Non-secure interrupts" "No,Yes"
textline "                                  "
bitfld.long 0x00 24. " DPG0      ,Disable Processor selection for Group 0 interrupts" "No,Yes"
bitfld.long 0x00 3. "               RWP            ,Register Write Pending. Indicates whether a register write for the current Security state is in progress or not" "Not pending,Pending"
bitfld.long 0x00 0. "     ENABLE_LPIS      ,Enables LPIs in implementations where affinity routing is enabled for Security state" "Disabled,Enabled"
elif (((per.q(COMP.BASE("GICR",-1.)+0x08))&0x21)==0x20)
group.long 0x0000++0x03
line.long 0x00 "GICR_CTLR,Redistributor Control Register"
rbitfld.long 0x00 31. "         UWP       ,Upstream Write Pending. Indicates whether all upstream writes have been communicated to the Distributor" "Not pending,Pending"
bitfld.long 0x00 26. "       DPG1S          ,Disable Processor selection for Group 1 Secure interrupts" "No,Yes"
bitfld.long 0x00 25. "             DPG1NS           ,Disable Processor selection for Group 1 Non-secure interrupts" "No,Yes"
textline "                                  "
bitfld.long 0x00 24. " DPG0      ,Disable Processor selection for Group 0 interrupts" "No,Yes"
bitfld.long 0x00 3. "               RWP            ,Register Write Pending. Indicates whether a register write for the current Security state is in progress or not" "Not pending,Pending"
elif (((per.q(COMP.BASE("GICR",-1.)+0x08))&0x21)==0x01)
group.long 0x0000++0x03
line.long 0x00 "GICR_CTLR,Redistributor Control Register"
rbitfld.long 0x00 31. "         UWP       ,Upstream Write Pending. Indicates whether all upstream writes have been communicated to the Distributor" "Not pending,Pending"
bitfld.long 0x00 3. "       RWP            ,Register Write Pending. Indicates whether a register write for the current Security state is in progress or not" "Not pending,Pending"
bitfld.long 0x00 0. "     ENABLE_LPIS      ,Enables LPIs in implementations where affinity routing is enabled for Security state" "Disabled,Enabled"
else
group.long 0x0000++0x03
line.long 0x00 "GICR_CTLR,Redistributor Control Register"
rbitfld.long 0x00 31. "         UWP       ,Upstream Write Pending. Indicates whether all upstream writes have been communicated to the Distributor" "Not pending,Pending"
bitfld.long 0x00 3. "       RWP            ,Register Write Pending. Indicates whether a register write for the current Security state is in progress or not" "Not pending,Pending"
endif
rgroup.long 0x0004++0x03
line.long 0x00 "GICR_IIDR,Distributor Implementer Identification Register"
bitfld.long 0x00 24.--31. "         PRODID    ,Indicates the product ID" "GIC-500,?..."
bitfld.long 0x00 16.--19. "           VAR            ,Major revison number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
textline "                                  "
bitfld.long 0x00 12.--15. " REV       ,Minor revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "                IMP            ,Implementer"
rgroup.quad 0x0008++0x07
line.quad 0x00 "GICR_TYPER,Interrupt Controller Type Register"
hexmask.quad.byte 0x00 56.--63. 1. " AFF3      ,Affinity level 3 value for the Redistributor"
hexmask.quad.byte 0x00 48.--55. 1. "                AFF2           ,Affinity level 2 value for the Redistributor"
hexmask.quad.byte 0x00 40.--47. 1. "              AFF1             ,Affinity level 1 value for the Redistributor"
textline "                                  "
hexmask.quad.byte 0x00 32.--39. 1. " AFF0      ,Affinity level 0 value for the Redistributor"
bitfld.quad 0x00 24.--25. "                COMMONLPIAFF   ,The affinity level at which Redistributors share a LPI Configuration table" "All levels,AFF3,AFF3/AFF2,AFF3/AFF2/AFF1"
hexmask.quad.word 0x00 8.--23. 1. "  PROCESSOR_NUMBER ,A unique identifier for the PE"
textline "                                  "
bitfld.quad 0x00 5. " DPGS      ,Sets support for GICR_CTLR.DPG* bits" "Not supported,Supported"
bitfld.quad 0x00 4. "     LAST           ,Indicates whether this Redistributor is the highest-numbered Redistributor in a series of contiguous Redistributor pages" "Not highest,Highest"
bitfld.quad 0x00 3. "     DIRECTLPI        ,Indicates whether this Redistributor supports direct injection of LPIs" "Not supported,Supported"
textline "                                  "
bitfld.quad 0x00 0. " PLPIS     ,Indicates whether the GIC implementation supports physical LPIs" "Not supported,Supported"
if ((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x00)||((((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICR",-1.)+0x0014))))
group.long 0x0014++0x03
line.long 0x00 "GICR_WAKER,Power Management Control Register"
bitfld.long 0x00 31. "         QUIESCENT ,This bit shows that the GIC-500 is idle and can be powered down if required" "Not quiescent,Quiescent"
bitfld.long 0x00 2. "     CHILDRENASLEEP ,Indicates the bus between the CPU interface and this Redistributor is quiescent" "Not quiescent,Quiescent"
bitfld.long 0x00 1. "   PROCESSORASLEEP  ,Indicates if this Redistributor must assert a WakeRequest if there is a pending interrupt targeted at the connected core" "No,Yes"
textline "                                  "
bitfld.long 0x00 0. " SLEEP     ,Indicates if GIC-500 ensures that all the caches are consistent with external memory and that it is safe to power off" "No,Yes"
textline "                                  "
else
hgroup.long 0x0014++0x03
hide.long 0x00 "GICR_WAKER,Power Management Control Register"
endif
group.quad 0x070++0x07
line.quad 0x00 "GICR_PROPBASER,Common LPI configuration table base register"
bitfld.quad 0x00 56.--58. " OUTERCACHE       ,Indicates the Outer Cacheability attributes of accesses to the LPI Configuration table" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable"
hexmask.quad 0x00 12.--51. 0x10 "  PHYSICAL_ADDRESS ,Bits [51:12] of the physical address containing the LPI Configuration table"
textline "                                  "
bitfld.quad 0x00 10.--11. " SHAREABILITY     ,Indicates the Shareability attributes of accesses to the LPI Configuration table" "Non-shareable,Inner Shareable,Outer Shareable,?..."
bitfld.quad 0x00 7.--9. "                  INNERCACHE       ,Indicates the Inner Cacheability attributes of accesses to the LPI Configuration table" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable"
textline "                                  "
bitfld.quad 0x00 0.--4. " IDBITS           ,The number of bits of LPI INTID supported minus one by the LPI Configuration table starting at Physical_Address"
group.quad 0x78++0x07
line.quad 0x00 "GICR_PENDBASER,LPI pending table base register"
bitfld.quad 0x00 62. "         PTZ              ,Pending Table Zero" "Not zero,Zero" 
bitfld.quad 0x00 56.--58. "                         OUTERCACHE       ,Indicates the Outer Cacheability attributes of accesses to the LPI Pending table" "Defined in INNERCACHE,Normal outer non-cacheable,Normal outer RA WT cacheable,Normal outer RA WB cacheable,Normal outer WA WT cacheable,Normal outer WA WB cacheable,Normal outer RA WA WT cacheable,Normal outer RA WA WB cacheable"
textline "                                  "
hexmask.quad 0x00 16.--51. 0x10 " PHYSICAL_ADDRESS ,Bits [51:16] of the physical address containing the LPI Pending table"
bitfld.quad 0x00 10.--11. "                 SHAREABILITY     ,Indicates the Shareability attributes of accesses to the LPI Pending table" "Non-shareable,Inner Shareable,Outer Shareable,?..."
textline "                                  "
bitfld.quad 0x00 7.--9. " INNERCACHE       ,Indicates the Inner Cacheability attributes of accesses to the LPI Pending table" "Device-nGnRnE,Normal inner non-cacheable,Normal inner RA WT cacheable,Normal inner RA WB cacheable,Normal inner WA WT cacheable,Normal inner WA WB cacheable,Normal inner RA WA WT cacheable,Normal inner RA WA WB cacheable"
textline "                                 "
tree.end
tree "SGI and PPI Registers"
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICR",-1.)+0x10080))
group.long 0x10080++0x03
line.long 0x0 "GICR_IGROUPR0,Interrupt Group Register 0"
bitfld.long 0x00 31. "         GSB31 ,Group Status Bit 31" "Secure,Non-secure Group 1"
bitfld.long 0x00 30. "  GSB30 ,Group Status Bit 30" "Secure,Non-secure Group 1"
bitfld.long 0x00 29. "  GSB29 ,Group Status Bit 29" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 28. "         GSB28 ,Group Status Bit 28" "Secure,Non-secure Group 1"
bitfld.long 0x00 27. "  GSB27 ,Group Status Bit 27" "Secure,Non-secure Group 1"
bitfld.long 0x00 26. "  GSB26 ,Group Status Bit 26" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 25. "         GSB25 ,Group Status Bit 25" "Secure,Non-secure Group 1"
bitfld.long 0x00 24. "  GSB24 ,Group Status Bit 24" "Secure,Non-secure Group 1"
bitfld.long 0x00 23. "  GSB23 ,Group Status Bit 23" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 22. "         GSB22 ,Group Status Bit 22" "Secure,Non-secure Group 1"
bitfld.long 0x00 21. "  GSB21 ,Group Status Bit 21" "Secure,Non-secure Group 1"
bitfld.long 0x00 20. "  GSB20 ,Group Status Bit 20" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 19. "         GSB19 ,Group Status Bit 19" "Secure,Non-secure Group 1"
bitfld.long 0x00 18. "  GSB18 ,Group Status Bit 18" "Secure,Non-secure Group 1"
bitfld.long 0x00 17. "  GSB17 ,Group Status Bit 17" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 16. "         GSB16 ,Group Status Bit 16" "Secure,Non-secure Group 1"
bitfld.long 0x00 15. "  GSB15 ,Group Status Bit 15" "Secure,Non-secure Group 1"
bitfld.long 0x00 14. "  GSB14 ,Group Status Bit 14" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 13. "         GSB13 ,Group Status Bit 13" "Secure,Non-secure Group 1"
bitfld.long 0x00 12. "  GSB12 ,Group Status Bit 12" "Secure,Non-secure Group 1"
bitfld.long 0x00 11. "  GSB11 ,Group Status Bit 11" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 10. "         GSB10 ,Group Status Bit 10" "Secure,Non-secure Group 1"
bitfld.long 0x00 9. "  GSB9  ,Group Status Bit 9" "Secure,Non-secure Group 1"
bitfld.long 0x00 8. "  GSB8  ,Group Status Bit 8" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 7. "         GSB7  ,Group Status Bit 7" "Secure,Non-secure Group 1"
bitfld.long 0x00 6. "  GSB6  ,Group Status Bit 6" "Secure,Non-secure Group 1"
bitfld.long 0x00 5. "  GSB5  ,Group Status Bit 5" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 4. "         GSB4  ,Group Status Bit 4" "Secure,Non-secure Group 1"
bitfld.long 0x00 3. "  GSB3  ,Group Status Bit 3" "Secure,Non-secure Group 1"
bitfld.long 0x00 2. "  GSB2  ,Group Status Bit 2" "Secure,Non-secure Group 1"
textline "                          "
bitfld.long 0x00 1. "         GSB1  ,Group Status Bit 1" "Secure,Non-secure Group 1"
bitfld.long 0x00 0. "  GSB0  ,Group Status Bit 0" "Secure,Non-secure Group 1"
elif (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x000)
group.long 0x10080++0x03
line.long 0x0 "GICR_IGROUPR0,Interrupt Group Register 0"
bitfld.long 0x00 31. "         GSB31 ,Group Status Bit 31" "Group 0,Group 1"
bitfld.long 0x00 30. "             GSB30 ,Group Status Bit 30" "Group 0,Group 1"
bitfld.long 0x00 29. "             GSB29 ,Group Status Bit 29" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 28. "         GSB28 ,Group Status Bit 28" "Group 0,Group 1"
bitfld.long 0x00 27. "             GSB27 ,Group Status Bit 27" "Group 0,Group 1"
bitfld.long 0x00 26. "             GSB26 ,Group Status Bit 26" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 25. "         GSB25 ,Group Status Bit 25" "Group 0,Group 1"
bitfld.long 0x00 24. "             GSB24 ,Group Status Bit 24" "Group 0,Group 1"
bitfld.long 0x00 23. "             GSB23 ,Group Status Bit 23" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 22. "         GSB22 ,Group Status Bit 22" "Group 0,Group 1"
bitfld.long 0x00 21. "             GSB21 ,Group Status Bit 21" "Group 0,Group 1"
bitfld.long 0x00 20. "             GSB20 ,Group Status Bit 20" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 19. "         GSB19 ,Group Status Bit 19" "Group 0,Group 1"
bitfld.long 0x00 18. "             GSB18 ,Group Status Bit 18" "Group 0,Group 1"
bitfld.long 0x00 17. "             GSB17 ,Group Status Bit 17" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 16. "         GSB16 ,Group Status Bit 16" "Group 0,Group 1"
bitfld.long 0x00 15. "             GSB15 ,Group Status Bit 15" "Group 0,Group 1"
bitfld.long 0x00 14. "             GSB14 ,Group Status Bit 14" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 13. "         GSB13 ,Group Status Bit 13" "Group 0,Group 1"
bitfld.long 0x00 12. "             GSB12 ,Group Status Bit 12" "Group 0,Group 1"
bitfld.long 0x00 11. "             GSB11 ,Group Status Bit 11" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 10. "         GSB10 ,Group Status Bit 10" "Group 0,Group 1"
bitfld.long 0x00 9. "             GSB9  ,Group Status Bit 9" "Group 0,Group 1"
bitfld.long 0x00 8. "             GSB8  ,Group Status Bit 8" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 7. "         GSB7  ,Group Status Bit 7" "Group 0,Group 1"
bitfld.long 0x00 6. "             GSB6  ,Group Status Bit 6" "Group 0,Group 1"
bitfld.long 0x00 5. "             GSB5  ,Group Status Bit 5" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 4. "         GSB4  ,Group Status Bit 4" "Group 0,Group 1"
bitfld.long 0x00 3. "             GSB3  ,Group Status Bit 3" "Group 0,Group 1"
bitfld.long 0x00 2. "             GSB2  ,Group Status Bit 2" "Group 0,Group 1"
textline "                          "
bitfld.long 0x00 1. "         GSB1  ,Group Status Bit 1" "Group 0,Group 1"
bitfld.long 0x00 0. "             GSB0  ,Group Status Bit 0" "Group 0,Group 1"
else
hgroup.long 0x10080++0x03
hide.long 0x00 "GICR_IGROUPR0,Interrupt Group Register 0"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
textline "                          "
width 24.
group.long 0x10100++0x03
line.long 0x0 "GICR_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. "  SET/CLRENB31    ,Set/Clear Enable Bit 31" "Disabled,Enabled"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRENB30    ,Set/Clear Enable Bit 30" "Disabled,Enabled"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRENB29    ,Set/Clear Enable Bit 29" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  SET/CLRENB28    ,Set/Clear Enable Bit 28" "Disabled,Enabled"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRENB27    ,Set/Clear Enable Bit 27" "Disabled,Enabled"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRENB26    ,Set/Clear Enable Bit 26" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. "  SET/CLRENB25    ,Set/Clear Enable Bit 25" "Disabled,Enabled"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRENB24    ,Set/Clear Enable Bit 24" "Disabled,Enabled"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRENB23    ,Set/Clear Enable Bit 23" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  SET/CLRENB22    ,Set/Clear Enable Bit 22" "Disabled,Enabled"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRENB21    ,Set/Clear Enable Bit 21" "Disabled,Enabled"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRENB20    ,Set/Clear Enable Bit 20" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. "  SET/CLRENB19    ,Set/Clear Enable Bit 19" "Disabled,Enabled"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRENB18    ,Set/Clear Enable Bit 18" "Disabled,Enabled"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRENB17    ,Set/Clear Enable Bit 17" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  SET/CLRENB16    ,Set/Clear Enable Bit 16" "Disabled,Enabled"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRENB15    ,Set/Clear Enable Bit 15" "Disabled,Enabled"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRENB14    ,Set/Clear Enable Bit 14" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. "  SET/CLRENB13    ,Set/Clear Enable Bit 13" "Disabled,Enabled"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRENB12    ,Set/Clear Enable Bit 12" "Disabled,Enabled"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRENB11    ,Set/Clear Enable Bit 11" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  SET/CLRENB10    ,Set/Clear Enable Bit 10" "Disabled,Enabled"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRENB9     ,Set/Clear Enable Bit 9" "Disabled,Enabled"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRENB8     ,Set/Clear Enable Bit 8" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. "  SET/CLRENB7     ,Set/Clear Enable Bit 7" "Disabled,Enabled"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRENB6     ,Set/Clear Enable Bit 6" "Disabled,Enabled"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRENB5     ,Set/Clear Enable Bit 5" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  SET/CLRENB4     ,Set/Clear Enable Bit 4" "Disabled,Enabled"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRENB3     ,Set/Clear Enable Bit 3" "Disabled,Enabled"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRENB2     ,Set/Clear Enable Bit 2" "Disabled,Enabled"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. "  SET/CLRENB1     ,Set/Clear Enable Bit 1" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRENB0     ,Set/Clear Enable Bit 0" "Disabled,Enabled"
group.long 0x10200++0x03
line.long 0x0 "GICR_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. "  SET/CLRPEND31   ,Set/Clear Pending Bit 31" "Not pending,Pending"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "    SET/CLRPEND30   ,Set/Clear Pending Bit 30" "Not pending,Pending"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "    SET/CLRPEND29   ,Set/Clear Pending Bit 29" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  SET/CLRPEND28   ,Set/Clear Pending Bit 28" "Not pending,Pending"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "    SET/CLRPEND27   ,Set/Clear Pending Bit 27" "Not pending,Pending"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "    SET/CLRPEND26   ,Set/Clear Pending Bit 26" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. "  SET/CLRPEND25   ,Set/Clear Pending Bit 25" "Not pending,Pending"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "    SET/CLRPEND24   ,Set/Clear Pending Bit 24" "Not pending,Pending"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "    SET/CLRPEND23   ,Set/Clear Pending Bit 23" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  SET/CLRPEND22   ,Set/Clear Pending Bit 22" "Not pending,Pending"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "    SET/CLRPEND21   ,Set/Clear Pending Bit 21" "Not pending,Pending"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "    SET/CLRPEND20   ,Set/Clear Pending Bit 20" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. "  SET/CLRPEND19   ,Set/Clear Pending Bit 19" "Not pending,Pending"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "    SET/CLRPEND18   ,Set/Clear Pending Bit 18" "Not pending,Pending"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "    SET/CLRPEND17   ,Set/Clear Pending Bit 17" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  SET/CLRPEND16   ,Set/Clear Pending Bit 16" "Not pending,Pending"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "    SET/CLRPEND15   ,Set/Clear Pending Bit 15" "Not pending,Pending"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "    SET/CLRPEND14   ,Set/Clear Pending Bit 14" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. "  SET/CLRPEND13   ,Set/Clear Pending Bit 13" "Not pending,Pending"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "    SET/CLRPEND12   ,Set/Clear Pending Bit 12" "Not pending,Pending"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "    SET/CLRPEND11   ,Set/Clear Pending Bit 11" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  SET/CLRPEND10   ,Set/Clear Pending Bit 10" "Not pending,Pending"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "    SET/CLRPEND9    ,Set/Clear Pending Bit 9" "Not pending,Pending"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "    SET/CLRPEND8    ,Set/Clear Pending Bit 8" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. "  SET/CLRPEND7    ,Set/Clear Pending Bit 7" "Not pending,Pending"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "    SET/CLRPEND6    ,Set/Clear Pending Bit 6" "Not pending,Pending"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "    SET/CLRPEND5    ,Set/Clear Pending Bit 5" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  SET/CLRPEND4    ,Set/Clear Pending Bit 4" "Not pending,Pending"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "    SET/CLRPEND3    ,Set/Clear Pending Bit 3" "Not pending,Pending"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "    SET/CLRPEND2    ,Set/Clear Pending Bit 2" "Not pending,Pending"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. "  SET/CLRPEND1    ,Set/Clear Pending Bit 1" "Not pending,Pending"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "    SET/CLRPEND0    ,Set/Clear Pending Bit 0" "Not pending,Pending"
group.long 0x10300++0x03
line.long 0x0 "GICR_SET/CLR_ACTIVER0,Interrupt Set/Clear Active Register 0"
setclrfld.long 0x00 31. 0x00 31. 0x80 31. "  SET/CLRACTIVE31 ,Set/Clear Active Bit 31" "Not active,Active"
setclrfld.long 0x00 30. 0x00 30. 0x80 30. "  SET/CLRACTIVE30 ,Set/Clear Active Bit 30" "Not active,Active"
setclrfld.long 0x00 29. 0x00 29. 0x80 29. "  SET/CLRACTIVE29 ,Set/Clear Active Bit 29" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 28. 0x00 28. 0x80 28. "  SET/CLRACTIVE28 ,Set/Clear Active Bit 28" "Not active,Active"
setclrfld.long 0x00 27. 0x00 27. 0x80 27. "  SET/CLRACTIVE27 ,Set/Clear Active Bit 27" "Not active,Active"
setclrfld.long 0x00 26. 0x00 26. 0x80 26. "  SET/CLRACTIVE26 ,Set/Clear Active Bit 26" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 25. 0x00 25. 0x80 25. "  SET/CLRACTIVE25 ,Set/Clear Active Bit 25" "Not active,Active"
setclrfld.long 0x00 24. 0x00 24. 0x80 24. "  SET/CLRACTIVE24 ,Set/Clear Active Bit 24" "Not active,Active"
setclrfld.long 0x00 23. 0x00 23. 0x80 23. "  SET/CLRACTIVE23 ,Set/Clear Active Bit 23" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 22. 0x00 22. 0x80 22. "  SET/CLRACTIVE22 ,Set/Clear Active Bit 22" "Not active,Active"
setclrfld.long 0x00 21. 0x00 21. 0x80 21. "  SET/CLRACTIVE21 ,Set/Clear Active Bit 21" "Not active,Active"
setclrfld.long 0x00 20. 0x00 20. 0x80 20. "  SET/CLRACTIVE20 ,Set/Clear Active Bit 20" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 19. 0x00 19. 0x80 19. "  SET/CLRACTIVE19 ,Set/Clear Active Bit 19" "Not active,Active"
setclrfld.long 0x00 18. 0x00 18. 0x80 18. "  SET/CLRACTIVE18 ,Set/Clear Active Bit 18" "Not active,Active"
setclrfld.long 0x00 17. 0x00 17. 0x80 17. "  SET/CLRACTIVE17 ,Set/Clear Active Bit 17" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 16. 0x00 16. 0x80 16. "  SET/CLRACTIVE16 ,Set/Clear Active Bit 16" "Not active,Active"
setclrfld.long 0x00 15. 0x00 15. 0x80 15. "  SET/CLRACTIVE15 ,Set/Clear Active Bit 15" "Not active,Active"
setclrfld.long 0x00 14. 0x00 14. 0x80 14. "  SET/CLRACTIVE14 ,Set/Clear Active Bit 14" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 13. 0x00 13. 0x80 13. "  SET/CLRACTIVE13 ,Set/Clear Active Bit 13" "Not active,Active"
setclrfld.long 0x00 12. 0x00 12. 0x80 12. "  SET/CLRACTIVE12 ,Set/Clear Active Bit 12" "Not active,Active"
setclrfld.long 0x00 11. 0x00 11. 0x80 11. "  SET/CLRACTIVE11 ,Set/Clear Active Bit 11" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 10. 0x00 10. 0x80 10. "  SET/CLRACTIVE10 ,Set/Clear Active Bit 10" "Not active,Active"
setclrfld.long 0x00 9. 0x00 9. 0x80 9. "  SET/CLRACTIVE9  ,Set/Clear Active Bit 9" "Not active,Active"
setclrfld.long 0x00 8. 0x00 8. 0x80 8. "  SET/CLRACTIVE8  ,Set/Clear Active Bit 8" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 7. 0x00 7. 0x80 7. "  SET/CLRACTIVE7  ,Set/Clear Active Bit 7" "Not active,Active"
setclrfld.long 0x00 6. 0x00 6. 0x80 6. "  SET/CLRACTIVE6  ,Set/Clear Active Bit 6" "Not active,Active"
setclrfld.long 0x00 5. 0x00 5. 0x80 5. "  SET/CLRACTIVE5  ,Set/Clear Active Bit 5" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 4. 0x00 4. 0x80 4. "  SET/CLRACTIVE4  ,Set/Clear Active Bit 4" "Not active,Active"
setclrfld.long 0x00 3. 0x00 3. 0x80 3. "  SET/CLRACTIVE3  ,Set/Clear Active Bit 3" "Not active,Active"
setclrfld.long 0x00 2. 0x00 2. 0x80 2. "  SET/CLRACTIVE2  ,Set/Clear Active Bit 2" "Not active,Active"
textline "                                 "
setclrfld.long 0x00 1. 0x00 1. 0x80 1. "  SET/CLRACTIVE1  ,Set/Clear Active Bit 1" "Not active,Active"
setclrfld.long 0x00 0. 0x00 0. 0x80 0. "  SET/CLRACTIVE0  ,Set/Clear Active Bit 0" "Not active,Active"
textline "                                 "
width 18.
group.long 0x10400++0x03
line.long 0x00 "GICR_IPRIORITYR0,Interrupt Priority Register 0"
hexmask.long.byte 0x00 24.--31. 1. " INTID3    ,Interrupt ID3    Priority/Priority Byte Offset 3   "
hexmask.long.byte 0x00 16.--23. 1. "     INTID2    ,Interrupt ID2    Priority/Priority Byte Offset 2   "
hexmask.long.byte 0x00 8.--15. 1. "     INTID1    ,Interrupt ID1    Priority/Priority Byte Offset 1   "
hexmask.long.byte 0x00 0.--7. 1. "     INTID0    ,Interrupt ID0    Priority/Priority Byte Offset 0   "
group.long 0x10404++0x03
line.long 0x00 "GICR_IPRIORITYR1,Interrupt Priority Register 1"
hexmask.long.byte 0x00 24.--31. 1. " INTID7    ,Interrupt ID7    Priority/Priority Byte Offset 7   "
hexmask.long.byte 0x00 16.--23. 1. "     INTID6    ,Interrupt ID6    Priority/Priority Byte Offset 6   "
hexmask.long.byte 0x00 8.--15. 1. "     INTID5    ,Interrupt ID5    Priority/Priority Byte Offset 5   "
hexmask.long.byte 0x00 0.--7. 1. "     INTID4    ,Interrupt ID4    Priority/Priority Byte Offset 4   "
group.long 0x10408++0x03
line.long 0x00 "GICR_IPRIORITYR2,Interrupt Priority Register 2"
hexmask.long.byte 0x00 24.--31. 1. " INTID11   ,Interrupt ID11   Priority/Priority Byte Offset 11  "
hexmask.long.byte 0x00 16.--23. 1. "     INTID10   ,Interrupt ID10   Priority/Priority Byte Offset 10  "
hexmask.long.byte 0x00 8.--15. 1. "     INTID9    ,Interrupt ID9    Priority/Priority Byte Offset 9   "
hexmask.long.byte 0x00 0.--7. 1. "     INTID8    ,Interrupt ID8    Priority/Priority Byte Offset 8   "
group.long 0x1040C++0x03
line.long 0x00 "GICR_IPRIORITYR3,Interrupt Priority Register 3"
hexmask.long.byte 0x00 24.--31. 1. " INTID15   ,Interrupt ID15   Priority/Priority Byte Offset 15  "
hexmask.long.byte 0x00 16.--23. 1. "     INTID14   ,Interrupt ID14   Priority/Priority Byte Offset 14  "
hexmask.long.byte 0x00 8.--15. 1. "     INTID13   ,Interrupt ID13   Priority/Priority Byte Offset 13  "
hexmask.long.byte 0x00 0.--7. 1. "     INTID12   ,Interrupt ID12   Priority/Priority Byte Offset 12  "
group.long 0x10410++0x03
line.long 0x00 "GICR_IPRIORITYR4,Interrupt Priority Register 4"
hexmask.long.byte 0x00 24.--31. 1. " INTID19   ,Interrupt ID19   Priority/Priority Byte Offset 19  "
hexmask.long.byte 0x00 16.--23. 1. "     INTID18   ,Interrupt ID18   Priority/Priority Byte Offset 18  "
hexmask.long.byte 0x00 8.--15. 1. "     INTID17   ,Interrupt ID17   Priority/Priority Byte Offset 17  "
hexmask.long.byte 0x00 0.--7. 1. "     INTID16   ,Interrupt ID16   Priority/Priority Byte Offset 16  "
group.long 0x10414++0x03
line.long 0x00 "GICR_IPRIORITYR5,Interrupt Priority Register 5"
hexmask.long.byte 0x00 24.--31. 1. " INTID23   ,Interrupt ID23   Priority/Priority Byte Offset 23  "
hexmask.long.byte 0x00 16.--23. 1. "     INTID22   ,Interrupt ID22   Priority/Priority Byte Offset 22  "
hexmask.long.byte 0x00 8.--15. 1. "     INTID21   ,Interrupt ID21   Priority/Priority Byte Offset 21  "
hexmask.long.byte 0x00 0.--7. 1. "     INTID20   ,Interrupt ID20   Priority/Priority Byte Offset 20  "
group.long 0x10418++0x03
line.long 0x00 "GICR_IPRIORITYR6,Interrupt Priority Register 6"
hexmask.long.byte 0x00 24.--31. 1. " INTID27   ,Interrupt ID27   Priority/Priority Byte Offset 27  "
hexmask.long.byte 0x00 16.--23. 1. "     INTID26   ,Interrupt ID26   Priority/Priority Byte Offset 26  "
hexmask.long.byte 0x00 8.--15. 1. "     INTID25   ,Interrupt ID25   Priority/Priority Byte Offset 25  "
hexmask.long.byte 0x00 0.--7. 1. "     INTID24   ,Interrupt ID24   Priority/Priority Byte Offset 24  "
group.long 0x1041C++0x03
line.long 0x00 "GICR_IPRIORITYR7,Interrupt Priority Register 7"
hexmask.long.byte 0x00 24.--31. 1. " INTID31   ,Interrupt ID31   Priority/Priority Byte Offset 31  "
hexmask.long.byte 0x00 16.--23. 1. "     INTID30   ,Interrupt ID30   Priority/Priority Byte Offset 30  "
hexmask.long.byte 0x00 8.--15. 1. "     INTID29   ,Interrupt ID29   Priority/Priority Byte Offset 29  "
hexmask.long.byte 0x00 0.--7. 1. "     INTID28   ,Interrupt ID28   Priority/Priority Byte Offset 28  "
textline "                                 "
rgroup.long 0x10C00++0x03
line.long 0x00 "GICR_ICFGR0,Interrupt Configuration Register"
bitfld.long 0x00 31. " ICF15   ,Interrupt Configuration 15 (SGI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14   ,Interrupt Configuration 14 (SGI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13   ,Interrupt Configuration 13 (SGI)" "Level,Edge"
textline "                           "
bitfld.long 0x00 25. " ICF12   ,Interrupt Configuration 12 (SGI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11   ,Interrupt Configuration 11 (SGI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10   ,Interrupt Configuration 10 (SGI)" "Level,Edge"
textline "                           "
bitfld.long 0x00 19. " ICF9    ,Interrupt Configuration 9 (SGI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8    ,Interrupt Configuration 8 (SGI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7    ,Interrupt Configuration 7 (SGI)" "Level,Edge"
textline "                           "
bitfld.long 0x00 13. " ICF6    ,Interrupt Configuration 6 (SGI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5    ,Interrupt Configuration 5 (SGI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4    ,Interrupt Configuration 4 (SGI)" "Level,Edge"
textline "                           "
bitfld.long 0x00 7. " ICF3    ,Interrupt Configuration 3 (SGI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2    ,Interrupt Configuration 2 (SGI)" "Level,Edge"
group.long 0x10C04++0x03
line.long 0x00 "GICR_ICFGR1,Interrupt Configuration Register"
bitfld.long 0x00 31. " ICF15   ,Interrupt Configuration 15 (PPI)" "Level,Edge"
bitfld.long 0x00 29. "  ICF14   ,Interrupt Configuration 14 (PPI)" "Level,Edge"
bitfld.long 0x00 27. "  ICF13   ,Interrupt Configuration 13 (PPI)" "Level,Edge"
textline "                           "
bitfld.long 0x00 25. " ICF12   ,Interrupt Configuration 12 (PPI)" "Level,Edge"
bitfld.long 0x00 23. "  ICF11   ,Interrupt Configuration 11 (PPI)" "Level,Edge"
bitfld.long 0x00 21. "  ICF10   ,Interrupt Configuration 10 (PPI)" "Level,Edge"
textline "                           "
bitfld.long 0x00 19. " ICF9    ,Interrupt Configuration 9 (PPI)" "Level,Edge"
bitfld.long 0x00 17. "  ICF8    ,Interrupt Configuration 8 (PPI)" "Level,Edge"
bitfld.long 0x00 15. "  ICF7    ,Interrupt Configuration 7 (PPI)" "Level,Edge"
textline "                           "
bitfld.long 0x00 13. " ICF6    ,Interrupt Configuration 6 (PPI)" "Level,Edge"
bitfld.long 0x00 11. "  ICF5    ,Interrupt Configuration 5 (PPI)" "Level,Edge"
bitfld.long 0x00 9. "  ICF4    ,Interrupt Configuration 4 (PPI)" "Level,Edge"
textline "                           "
bitfld.long 0x00 7. " ICF3    ,Interrupt Configuration 3 (PPI)" "Level,Edge"
bitfld.long 0x00 5. "  ICF2    ,Interrupt Configuration 2 (PPI)" "Level,Edge"
bitfld.long 0x00 3. "  ICF1    ,Interrupt Configuration 1 (PPI)" "Level,Edge"
textline "                           "
width 18.
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICR",-1.)+0x10D00))
group.long 0x10D00++0x03
line.long 0x0 "GICR_IGRPMODR0,Interrupt Group Modifier Register 0"
bitfld.long 0x00 31. " GMB31 ,Group Modifier Bit 31" "0,1"
bitfld.long 0x00 30. "  GMB30 ,Group Modifier Bit 30" "0,1"
bitfld.long 0x00 29. "  GMB29 ,Group Modifier Bit 29" "0,1"
textline "                           "
bitfld.long 0x00 28. " GMB28 ,Group Modifier Bit 28" "0,1"
bitfld.long 0x00 27. "  GMB27 ,Group Modifier Bit 27" "0,1"
bitfld.long 0x00 26. "  GMB26 ,Group Modifier Bit 26" "0,1"
textline "                           "
bitfld.long 0x00 25. " GMB25 ,Group Modifier Bit 25" "0,1"
bitfld.long 0x00 24. "  GMB24 ,Group Modifier Bit 24" "0,1"
bitfld.long 0x00 23. "  GMB23 ,Group Modifier Bit 23" "0,1"
textline "                           "
bitfld.long 0x00 22. " GMB22 ,Group Modifier Bit 22" "0,1"
bitfld.long 0x00 21. "  GMB21 ,Group Modifier Bit 21" "0,1"
bitfld.long 0x00 20. "  GMB20 ,Group Modifier Bit 20" "0,1"
textline "                           "
bitfld.long 0x00 19. " GMB19 ,Group Modifier Bit 19" "0,1"
bitfld.long 0x00 18. "  GMB18 ,Group Modifier Bit 18" "0,1"
bitfld.long 0x00 17. "  GMB17 ,Group Modifier Bit 17" "0,1"
textline "                           "
bitfld.long 0x00 16. " GMB16 ,Group Modifier Bit 16" "0,1"
bitfld.long 0x00 15. "  GMB15 ,Group Modifier Bit 15" "0,1"
bitfld.long 0x00 14. "  GMB14 ,Group Modifier Bit 14" "0,1"
textline "                           "
bitfld.long 0x00 13. " GMB13 ,Group Modifier Bit 13" "0,1"
bitfld.long 0x00 12. "  GMB12 ,Group Modifier Bit 12" "0,1"
bitfld.long 0x00 11. "  GMB11 ,Group Modifier Bit 11" "0,1"
textline "                           "
bitfld.long 0x00 10. " GMB10 ,Group Modifier Bit 10" "0,1"
bitfld.long 0x00 9. "  GMB9  ,Group Modifier Bit 9" "0,1"
bitfld.long 0x00 8. "  GMB8  ,Group Modifier Bit 8" "0,1"
textline "                           "
bitfld.long 0x00 7. " GMB7  ,Group Modifier Bit 7" "0,1"
bitfld.long 0x00 6. "  GMB6  ,Group Modifier Bit 6" "0,1"
bitfld.long 0x00 5. "  GMB5  ,Group Modifier Bit 5" "0,1"
textline "                           "
bitfld.long 0x00 4. " GMB4  ,Group Modifier Bit 4" "0,1"
bitfld.long 0x00 3. "  GMB3  ,Group Modifier Bit 3" "0,1"
bitfld.long 0x00 2. "  GMB2  ,Group Modifier Bit 2" "0,1"
textline "                           "
bitfld.long 0x00 1. " GMB1  ,Group Modifier Bit 1" "0,1"
bitfld.long 0x00 0. "  GMB0  ,Group Modifier Bit 0" "0,1"
textline "                           "
else
hgroup.long 0x10D00++0x03
hide.long 0x0 "GICR_IGRPMODR0,Interrupt Group Modifier Register 0"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICR",-1.)+0x10E00))
group.long 0x10E00++0x03
line.long 0x00 "GICR_NSACR,Non-secure Access Control Register"
bitfld.long 0x00 30.--31. " NS_ACCESS15 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID15" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 28.--29. "  NS_ACCESS14 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID14" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 26.--27. "  NS_ACCESS13 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID13" "No access,G0S,G0S/G1S,?..."
textline "                           "
bitfld.long 0x00 24.--25. " NS_ACCESS12 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID12" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 22.--23. "  NS_ACCESS11 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID11" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 20.--21. "  NS_ACCESS10 ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID10" "No access,G0S,G0S/G1S,?..."
textline "                           "
bitfld.long 0x00 18.--19. " NS_ACCESS9  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID9" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 16.--17. "  NS_ACCESS8  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID8" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 14.--15. "  NS_ACCESS7  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID7" "No access,G0S,G0S/G1S,?..."
textline "                           "
bitfld.long 0x00 12.--13. " NS_ACCESS6  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID6" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 10.--11. "  NS_ACCESS5  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID5" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 8.--9. "  NS_ACCESS4  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID4" "No access,G0S,G0S/G1S,?..."
textline "                           "
bitfld.long 0x00 6.--7. " NS_ACCESS3  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID3" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 4.--5. "  NS_ACCESS2  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID2" "No access,G0S,G0S/G1S,?..."
bitfld.long 0x00 2.--3. "  NS_ACCESS1  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID1" "No access,G0S,G0S/G1S,?..."
textline "                           "
bitfld.long 0x00 0.--1. " NS_ACCESS0  ,Configures the level of Non-secure access permitted when the SGI is in Secure Group 0 or Secure Group 1 for interrupt ID0" "No access,G0S,G0S/G1S,?..."
textline "                           "
else
hgroup.long 0x10E00++0x03
hide.long 0x00 "GICR_NSACR,Non-secure Access Control Register"
textline "                          "
textline "                          "
textline "                          "
textline "                          "
textline "                          "
endif
rgroup.long 0x1C000++0x03
line.long 0x00 "GICR_MISCSTATUSR,Miscellaneous Status Register"
bitfld.long 0x00 31. " CPU_AS     ,CPU active state. This bit returns the actual status of the cpu_active signal for the core corresponding to the Redistributor whose register is being read" "Low,High"
bitfld.long 0x00 2. "  ENABLEGRP1_S ,EnableGrp1 Secure" "0,1"
bitfld.long 0x00 1. "     ENABLEGRP1_NS ,EnableGrp1 Non-secure" "0,1"
textline "                           "
bitfld.long 0x00 0. " ENABLEGRP0 ,EnableGrp0" "0,1"
rgroup.long 0x1C080++0x03
line.long 0x00 "GICR_PPISR,Private Peripheral Interrupt Status Register"
bitfld.long 0x00 31. " PPI31S     ,Actual status of the PPI31 input signal" "Low,High"
bitfld.long 0x00 30. "  PPI30S       ,Actual status of the PPI30 input signal" "Low,High"
bitfld.long 0x00 29. "  PPI29S        ,Actual status of the PPI29 input signal" "Low,High"
textline "                           "
bitfld.long 0x00 28. " PPI28S     ,Actual status of the PPI28 input signal" "Low,High"
bitfld.long 0x00 27. "  PPI27S       ,Actual status of the PPI27 input signal" "Low,High"
bitfld.long 0x00 26. "  PPI26S        ,Actual status of the PPI26 input signal" "Low,High"
textline "                           "
bitfld.long 0x00 25. " PPI25S     ,Actual status of the PPI25 input signal" "Low,High"
bitfld.long 0x00 24. "  PPI24S       ,Actual status of the PPI24 input signal" "Low,High"
bitfld.long 0x00 23. "  PPI23S        ,Actual status of the PPI23 input signal" "Low,High"
textline "                           "
bitfld.long 0x00 22. " PPI22S     ,Actual status of the PPI22 input signal" "Low,High"
bitfld.long 0x00 21. "  PPI21S       ,Actual status of the PPI21 input signal" "Low,High"
bitfld.long 0x00 20. "  PPI20S        ,Actual status of the PPI20 input signal" "Low,High"
textline "                           "
bitfld.long 0x00 19. " PPI19S     ,Actual status of the PPI19 input signal" "Low,High"
bitfld.long 0x00 18. "  PPI18S       ,Actual status of the PPI18 input signal" "Low,High"
bitfld.long 0x00 17. "  PPI17S        ,Actual status of the PPI17 input signal" "Low,High"
textline "                           "
bitfld.long 0x00 16. " PPI16S     ,Actual status of the PPI16 input signal" "Low,High"
tree.end
width 12.
tree "Peripheral/Component ID Registers"
rgroup.long 0xFFE0++0x03
line.long 0x00 "GICR_PIDR0,Peripheral ID0 Register"
hexmask.long.byte 0x00 0.--7. 1. " PART_0  ,Part number[7:0]"
rgroup.long 0xFFE4++0x03
line.long 0x00 "GICR_PIDR1,Peripheral ID1 Register"
bitfld.long 0x00 4.--7. " DES_1   ,JEP106 identity code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "        PART_1 ,         Part number[11:8]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xFFE8++0x03
line.long 0x00 "GICR_PIDR2,Peripheral ID2 Register"
bitfld.long 0x00 4.--7. " ARCHREV ,Identifies the version of the GIC architecture with which the GIC-500 complies" "Reserved,Reserved,Reserved,v3.0,?..."
bitfld.long 0x00 3. "  JEDEC  ,Indicates that a JEDEC-assigned JEP106 identity code is used" "Low,High"
bitfld.long 0x00 0.--2. "  DES_1 ,JEP106 identity code [6:4]" "0,1,2,3,4,5,6,7"
rgroup.long 0xFFEC++0x03
line.long 0x00 "GICR_PIDR3,Peripheral ID3 Register"
bitfld.long 0x00 4.--7. " REVAND  ,Manufacturer defined revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "        CMOD   ,Indicates if the customer has modified the behavior of the component" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xFFD0++0x03
line.long 0x00 "GICR_PIDR4,Peripheral ID4 Register"
bitfld.long 0x00 4.--7. " SIZE    ,64 KB software visible page" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "        DES_2  ,ARM implementation" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hgroup.long 0xFFD4++0x03
hide.long 0x00 "GICR_PIDR5,Peripheral ID5 Register"
hgroup.long 0xFFD8++0x03
hide.long 0x00 "GICR_PIDR6,Peripheral ID6 Register"
hgroup.long 0xFFDC++0x03
hide.long 0x00 "GICR_PIDR7,Peripheral ID7 Register"
rgroup.long 0xFFF0++0x03
line.long 0x00 "GICR_CIDR0,Component ID0 Register"
hexmask.long 0x00 0.--7. 1. " FIXVAL  ,ARM-defined fixed values for the preamble for component discovery"
rgroup.long 0xFFF4++0x03
line.long 0x00 "GICR_CIDR1,Component ID1 Register"
hexmask.long 0x00 0.--7. 1. " FIXVAL  ,ARM-defined fixed values for the preamble for component discovery"
rgroup.long 0xFFF8++0x03
line.long 0x00 "GICR_CIDR2,Component ID2 Register"
hexmask.long 0x00 0.--7. 1. " FIXVAL  ,ARM-defined fixed values for the preamble for component discovery"
rgroup.long 0xFFFC++0x03
line.long 0x00 "GICR_CIDR3,Component ID3 Register"
hexmask.long 0x00 0.--7. 1. " FIXVAL  ,ARM-defined fixed values for the preamble for component discovery"
tree.end
tree.end
width 0x0B
sif COMP.AVAILABLE("GICC")
base COMP.BASE("GICC",-1.)
width 14.
tree "CPU Interface"
if (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)&&(PER.ADDRESS.isSECUREEX(COMP.BASE("GICC",-1.)))
group.long 0x00++0x03
line.long 0x00 "GICC_CTLR,CPU Interface Control Register"
bitfld.long 0x00 10. " EOIMODENS     ,Controls the behavior of Non-secure accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID"
bitfld.long 0x00 9. "  EOIMODES      ,Controls the behavior of Secure accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID"
bitfld.long 0x00 8. "  IRQBYPDISGRP1 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 1" "Signaled,Not signaled"
textline "                       "
bitfld.long 0x00 7. " FIQBYPDISGRP1 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 1" "Signaled,Not signaled"
bitfld.long 0x00 6. "          IRQBYPDISGRP0 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 0" "Signaled,Not signaled"
bitfld.long 0x00 5. "          FIQBYPDISGRP0 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 0" "Signaled,Not signaled"
textline "                       "
bitfld.long 0x00 4. " CBPR          ,Controls whether GICC_BPR provides common control of preemption to Group 0 and Group 1 interrupts" "Group 0,Both"
bitfld.long 0x00 3. "               FIQEN         ,Controls whether the CPU interface signals Group 0 interrupts to a target PE using the FIQ or IRQ signal" "IRQ,FIQ"
bitfld.long 0x00 1. "                   ENABLEGRP1    ,Enables the signaling of Group 1 interrupts by the CPU interface to a target PE" "Disabled,Enabled"
textline "                       "
bitfld.long 0x00 0. " ENABLEGRP0    ,Enables the signaling of Group 0 interrupts by the CPU interface to a target PE" "Disabled,Enabled"
elif (((per.l(COMP.BASE("GICD",-1.)+0x04))&0x400)==0x400)
group.long 0x00++0x03
line.long 0x00 "GICC_CTLR,CPU Interface Control Register"
bitfld.long 0x00 9. " EOIMODENS     ,Controls the behavior of Non-secure accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID"
bitfld.long 0x00 6. "  IRQBYPDISGRP1 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 1" "Signaled,Not signaled"
bitfld.long 0x00 5. "          FIQBYPDISGRP1 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 1" "Signaled,Not signaled"
textline "                       "
bitfld.long 0x00 0. " ENABLEGRP1    ,Enables the signaling of Group 1 interrupts by the CPU interface to a target PE" "Disabled,Enabled"
else
group.long 0x00++0x03
line.long 0x00 "GICC_CTLR,CPU Interface Control Register"
bitfld.long 0x00 9. " EOIMODE       ,Controls the behavior of accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID"
bitfld.long 0x00 8. "  IRQBYPDISGRP1 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 1" "Signaled,Not signaled"
bitfld.long 0x00 7. "          FIQBYPDISGRP1 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 1" "Signaled,Not signaled"
textline "                       "
bitfld.long 0x00 6. " IRQBYPDISGRP0 ,Controls whether the bypass IRQ signal is signaled to the PE for Group 0" "Signaled,Not signaled"
bitfld.long 0x00 5. "          FIQBYPDISGRP0 ,Controls whether the bypass FIQ signal is signaled to the PE for Group 0" "Signaled,Not signaled"
bitfld.long 0x00 4. "          CBPR          ,Controls whether GICC_BPR provides common control of preemption to Group 0 and Group 1 interrupts" "Group 0,Both"
textline "                       "
bitfld.long 0x00 3. " FIQEN         ,Controls whether the CPU interface signals Group 0 interrupts to a target PE using the FIQ or IRQ signal" "IRQ,FIQ"
bitfld.long 0x00 1. "                   ENABLEGRP1    ,Enables the signaling of Group 1 interrupts by the CPU interface to a target PE" "Disabled,Enabled"
bitfld.long 0x00 0. "              ENABLEGRP0    ,Enables the signaling of Group 0 interrupts by the CPU interface to a target PE" "Disabled,Enabled"
endif
textline "                       "
group.long 0x04++0x03
line.long 0x00 "GICC_PMR,Interrupt Priority Mask Register"
hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,Priority mask level for CPU interface"
group.long 0x08++0x03
line.long 0x00 "GICC_BPR,Binary Point Register"
bitfld.long 0x00 0.--2. " BP       ,Binary point" "0,1,2,3,4,5,6,7"
hgroup.long 0x0C++0x03
hide.long 0x00 "GICC_IAR,Interrupt Acknowledge Register"
in
wgroup.long 0x10++0x03
line.long 0x00 "GICC_EOIR,End Of Interrupt Register"
hexmask.long.tbyte 0x00 0.--23. 1. " INTID    ,Interrupt ID"
rgroup.long 0x14++0x03
line.long 0x00 "GICC_RPR,Running Priority Register"
hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,Priority value of highest priority interrupt"
rgroup.long 0x18++0x03
line.long 0x00 "GICC_HPPIR,Highest Priority Pending Interrupt Register"
hexmask.long.tbyte 0x00 0.--23. 1. " INTID    ,Interrupt ID"
group.long 0x1C++0x03
line.long 0x00 "GICC_ABPR,Aliased Binary Point Register"
bitfld.long 0x00 0.--2. " BP       ,Binary point" "0,1,2,3,4,5,6,7"
hgroup.long 0x20++0x03
hide.long 0x00 "GICC_AIAR,Aliased Interrupt Acknowledge Register"
in
wgroup.long 0x24++0x03
line.long 0x00 "GICC_AEOIR,Aliased End of Interrupt Register"
hexmask.long.tbyte 0x00 0.--23. 1. " INTID    ,Interrupt ID"
rgroup.long 0x28++0x03
line.long 0x00 "GICC_AHPPIR,Aliased Highest Priority Pending Interrupt Register"
hexmask.long.tbyte 0x00 0.--23. 1. " INTID    ,Interrupt ID"
rgroup.long 0x2C++0x03
line.long 0x00 "GICC_STATUSR,CPU Interface Status Register"
bitfld.long 0x00 4. " ASV      ,Attempted security violation" "Not detected,Detected"
bitfld.long 0x00 3. "  WROD    ,Write to an RO location" "Not detected,Detected"
bitfld.long 0x00 2. "  RWOD ,Read of a WO location" "Not detected,Detected"
textline "                       "
bitfld.long 0x00 1. " WRD      ,Write to a reserved location" "Not detected,Detected"
bitfld.long 0x00 0. "  RRD     ,Read of a reserved location" "Not detected,Detected"
group.long 0xD0++0x03
line.long 0x00 "GICC_APR0,Active Priorities Register 0"
group.long 0xD4++0x03
line.long 0x00 "GICC_APR1,Active Priorities Register 1"
group.long 0xD8++0x03
line.long 0x00 "GICC_APR2,Active Priorities Register 2"
group.long 0xDC++0x03
line.long 0x00 "GICC_APR3,Active Priorities Register 3"
group.long 0xE0++0x03
line.long 0x00 "GICC_NSAPR0,Non-Secure Active Priorities Register 0"
group.long 0xE4++0x03
line.long 0x00 "GICC_NSAPR1,Non-Secure Active Priorities Register 1"
group.long 0xE8++0x03
line.long 0x00 "GICC_NSAPR2,Non-Secure Active Priorities Register 2"
group.long 0xEC++0x03
line.long 0x00 "GICC_NSAPR3,Non-Secure Active Priorities Register 3"
rgroup.long 0xFC++0x03
line.long 0x00 "GICC_IIDR,CPU Interface Identification Register"
hexmask.long.word 0x00 20.--31. 1. " PRODID   ,Product ID"
bitfld.long 0x00 16.--19. "          ARCHVER ,The version of the GIC architecture that is implemented" ",,,GICv3,?..."
bitfld.long 0x00 12.--15. "         REV  ,Revision number for the CPU interface" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--11. 1. "            IMP ,Implementer"
wgroup.long 0x1000++0x03
line.long 0x00 "GICC_DIR,Deactivate Interrupt Register"
hexmask.long.tbyte 0x00 0.--23. 1. " INTID    ,Interrupt ID"
tree.end
width 0x0b
endif
sif COMP.AVAILABLE("GICH")
base COMP.BASE("GICH",-1.)
width 13.
tree "Virtual CPU Control Interface"
group.long 0x00++0x03
line.long 0x00 "GICH_HCR,Hypervisor Control Register"
bitfld.long 0x00 27.--31. " EOICOUNT ,Counts the number of EOIs received that do not have a corresponding entry in the List registers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "             VGRP1DIE ,VM Group 1 Disabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 6. "      VGRP1EIE ,VM Group 1 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 5. "             VGRP0DIE ,VM Group 0 Disabled Interrupt Enable" "Disabled,Enabled"
textline "                      "
bitfld.long 0x00 4. " VGRP0EIE ,VM Group 0 Enabled Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 3. "       NPIE     ,No Pending Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 2. "      LRENPIE  ,List Register Entry Not Present Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x00 1. "             UIE      ,Underflow Interrupt Enable" "Disabled,Enabled"
textline "                      "
bitfld.long 0x00 0. " EN       ,Virtual CPU interface Enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "GICH_VTR,Virtual Type Register"
bitfld.long 0x00 29.--31. " PRIBITS  ,Number of priority bits" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 26.--28. "              PREBITS  ,Number of pre-emption bits" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 23.--25. "             IDBITS   ,The number of virtual interrupt identifier bits supported" "16 bits,24 bits,?..."
textline "                      "
bitfld.long 0x00 22. " SEIS     ,Indicates whether the virtual CPU interface supports generation of SEIs" "Not supported,Supported"
bitfld.long 0x00 21. "  A3V      ,Affinity 3 valid" "Invalid,Valid"
bitfld.long 0x00 0.--4. "       LISTREGS ,List regs number" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32"
group.long 0x08++0x03
line.long 0x00 "GICH_VMCR,Virtual Machine Control Register"
hexmask.long.byte 0x00 24.--31. 1. " VPMR     ,Virtual priority mask"
bitfld.long 0x00 21.--23. "             VBPR0    ,Defines the point at which the priority value fields split into two parts the group priority field and the subpriority field (group 0)" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 18.--20. "             VBPR1    ,Defines the point at which the priority value fields split into two parts the group priority field and the subpriority field (group 1)" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 9. "                    VEOIM    ,Virtual EOImode. DP - Drop the priority / ID - interrupt deactivate" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID"
textline "                      "
bitfld.long 0x00 4. " VCBPR    ,Virtual Common Binary Point Register" "ABPR,BPR"
bitfld.long 0x00 3. "           VFIQEN   ,Virtual FIQ enable" "Disabled,Enabled"
bitfld.long 0x00 2. "      VACKCTL  ,Virtual AckCtl" "INTID=1022,INTID=corresponding"
bitfld.long 0x00 1. "  VENG1    ,Virtual interrupt enable for group 1" "Disabled,Enabled"
textline "                      "
bitfld.long 0x00 0. " VENG0    ,Virtual interrupt enable for group 0" "Disabled,Enabled"
rgroup.long 0x10++0x03
line.long 0x00 "GICH_MISR,Maintenance Interrupt Status Register"
bitfld.long 0x00 7. " VGRP1D   ,vPE Group 1 Disabled maintenance interrupt assertion" "Not asserted,Asserted"
bitfld.long 0x00 6. "   VGRP1E   ,vPE Group 1 Enabled maintenance interrupt assertion" "Not asserted,Asserted"
bitfld.long 0x00 5. "  VGRP0D   ,vPE Group 0 Disabled maintenance interrupt assertion" "Not asserted,Asserted"
bitfld.long 0x00 4. "         VGRP0E   ,vPE Group 0 Enabled maintenance interrupt assertion" "Not asserted,Asserted"
textline "                      "
bitfld.long 0x00 3. " NP       ,No Pending maintenance interrupt assertion" "Not asserted,Asserted"
bitfld.long 0x00 2. "   LRENP    ,List Register Entry Not Present maintenance interrupt assertion" "Not asserted,Asserted"
bitfld.long 0x00 1. "  U        ,Underflow maintenance interrupt assertion" "Not asserted,Asserted"
bitfld.long 0x00 0. "         EOI      ,End Of Interrupt maintenance interrupt assertion" "Not asserted,Asserted"
rgroup.long 0x20++0x03
line.long 0x00 "GICH_EISR0,End of Interrupt Status Register"
bitfld.long 0x00 15. " STATUS15 ,EOI maintenance interrupt status for List register 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "   STATUS14 ,EOI maintenance interrupt status for List register 14" "No interrupt,Interrupt"
bitfld.long 0x00 13. "  STATUS13 ,EOI maintenance interrupt status for List register 13" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 12. " STATUS12 ,EOI maintenance interrupt status for List register 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "   STATUS11 ,EOI maintenance interrupt status for List register 11" "No interrupt,Interrupt"
bitfld.long 0x00 10. "  STATUS10 ,EOI maintenance interrupt status for List register 10" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 9. " STATUS9  ,EOI maintenance interrupt status for List register 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "   STATUS8  ,EOI maintenance interrupt status for List register 8" "No interrupt,Interrupt"
bitfld.long 0x00 7. "  STATUS7  ,EOI maintenance interrupt status for List register 7" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 6. " STATUS6  ,EOI maintenance interrupt status for List register 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "   STATUS5  ,EOI maintenance interrupt status for List register 5" "No interrupt,Interrupt"
bitfld.long 0x00 4. "  STATUS4  ,EOI maintenance interrupt status for List register 4" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 3. " STATUS3  ,EOI maintenance interrupt status for List register 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "   STATUS2  ,EOI maintenance interrupt status for List register 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "  STATUS1  ,EOI maintenance interrupt status for List register 1" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 0. " STATUS0  ,EOI maintenance interrupt status for List register 0" "No interrupt,Interrupt"
rgroup.long 0x30++0x03
line.long 0x00 "GICH_ELRSR0,Empty List register Status Register"
bitfld.long 0x00 15. " STATUS15 ,Status bit for List register 15" "No interrupt,Interrupt"
bitfld.long 0x00 14. "   STATUS14 ,Status bit for List register 14" "No interrupt,Interrupt"
bitfld.long 0x00 13. "  STATUS13 ,Status bit for List register 13" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 12. " STATUS12 ,Status bit for List register 12" "No interrupt,Interrupt"
bitfld.long 0x00 11. "   STATUS11 ,Status bit for List register 11" "No interrupt,Interrupt"
bitfld.long 0x00 10. "  STATUS10 ,Status bit for List register 10" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 9. " STATUS9  ,Status bit for List register 9" "No interrupt,Interrupt"
bitfld.long 0x00 8. "   STATUS8  ,Status bit for List register 8" "No interrupt,Interrupt"
bitfld.long 0x00 7. "  STATUS7  ,Status bit for List register 7" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 6. " STATUS6  ,Status bit for List register 6" "No interrupt,Interrupt"
bitfld.long 0x00 5. "   STATUS5  ,Status bit for List register 5" "No interrupt,Interrupt"
bitfld.long 0x00 4. "  STATUS4  ,Status bit for List register 4" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 3. " STATUS3  ,Status bit for List register 3" "No interrupt,Interrupt"
bitfld.long 0x00 2. "   STATUS2  ,Status bit for List register 2" "No interrupt,Interrupt"
bitfld.long 0x00 1. "  STATUS1  ,Status bit for List register 1" "No interrupt,Interrupt"
textline "                      "
bitfld.long 0x00 0. " STATUS0  ,Status bit for List register 0" "No interrupt,Interrupt"
textline "                      "
group.long 0xF0++0x03
line.long 0x00 "GICH_APR0,Active Priorities Register 0"
bitfld.long 0x00 31. "  P31 ,Active Priority 31" "0,1"
bitfld.long 0x00 30. "  P30 ,Active Priority 30" "0,1"
bitfld.long 0x00 29. "  P29 ,Active Priority 29" "0,1"
bitfld.long 0x00 28. "  P28 ,Active Priority 28" "0,1"
textline "                       "
bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1"
bitfld.long 0x00 26. "  P26 ,Active Priority 26" "0,1"
bitfld.long 0x00 25. "  P25 ,Active Priority 25" "0,1"
bitfld.long 0x00 24. "  P24 ,Active Priority 24" "0,1"
textline "                       "
bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1"
bitfld.long 0x00 22. "  P22 ,Active Priority 22" "0,1"
bitfld.long 0x00 21. "  P21 ,Active Priority 21" "0,1"
bitfld.long 0x00 20. "  P20 ,Active Priority 20" "0,1"
textline "                       "
bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1"
bitfld.long 0x00 18. "  P18 ,Active Priority 18" "0,1"
bitfld.long 0x00 17. "  P17 ,Active Priority 17" "0,1"
bitfld.long 0x00 16. "  P16 ,Active Priority 16" "0,1"
textline "                       "
bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1"
bitfld.long 0x00 14. "  P14 ,Active Priority 14" "0,1"
bitfld.long 0x00 13. "  P13 ,Active Priority 13" "0,1"
bitfld.long 0x00 12. "  P12 ,Active Priority 12" "0,1"
textline "                       "
bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1"
bitfld.long 0x00 10. "  P10 ,Active Priority 10" "0,1"
bitfld.long 0x00 9. "  P9  ,Active Priority 9" "0,1"
bitfld.long 0x00 8. "  P8  ,Active Priority 8" "0,1"
textline "                       "
bitfld.long 0x00 7. " P7  ,Active Priority 7" "0,1"
bitfld.long 0x00 6. "  P6  ,Active Priority 6" "0,1"
bitfld.long 0x00 5. "  P5  ,Active Priority 5" "0,1"
bitfld.long 0x00 4. "  P4  ,Active Priority 4" "0,1"
textline "                       "
bitfld.long 0x00 3. " P3  ,Active Priority 3" "0,1"
bitfld.long 0x00 2. "  P2  ,Active Priority 2" "0,1"
bitfld.long 0x00 1. "  P1  ,Active Priority 1" "0,1"
bitfld.long 0x00 0. "  P0  ,Active Priority 0" "0,1"
group.long 0xF4++0x03
line.long 0x00 "GICH_APR1,Active Priorities Register 1"
bitfld.long 0x00 31. "  P31 ,Active Priority 31" "0,1"
bitfld.long 0x00 30. "  P30 ,Active Priority 30" "0,1"
bitfld.long 0x00 29. "  P29 ,Active Priority 29" "0,1"
bitfld.long 0x00 28. "  P28 ,Active Priority 28" "0,1"
textline "                       "
bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1"
bitfld.long 0x00 26. "  P26 ,Active Priority 26" "0,1"
bitfld.long 0x00 25. "  P25 ,Active Priority 25" "0,1"
bitfld.long 0x00 24. "  P24 ,Active Priority 24" "0,1"
textline "                       "
bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1"
bitfld.long 0x00 22. "  P22 ,Active Priority 22" "0,1"
bitfld.long 0x00 21. "  P21 ,Active Priority 21" "0,1"
bitfld.long 0x00 20. "  P20 ,Active Priority 20" "0,1"
textline "                       "
bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1"
bitfld.long 0x00 18. "  P18 ,Active Priority 18" "0,1"
bitfld.long 0x00 17. "  P17 ,Active Priority 17" "0,1"
bitfld.long 0x00 16. "  P16 ,Active Priority 16" "0,1"
textline "                       "
bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1"
bitfld.long 0x00 14. "  P14 ,Active Priority 14" "0,1"
bitfld.long 0x00 13. "  P13 ,Active Priority 13" "0,1"
bitfld.long 0x00 12. "  P12 ,Active Priority 12" "0,1"
textline "                       "
bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1"
bitfld.long 0x00 10. "  P10 ,Active Priority 10" "0,1"
bitfld.long 0x00 9. "  P9  ,Active Priority 9" "0,1"
bitfld.long 0x00 8. "  P8  ,Active Priority 8" "0,1"
textline "                       "
bitfld.long 0x00 7. " P7  ,Active Priority 7" "0,1"
bitfld.long 0x00 6. "  P6  ,Active Priority 6" "0,1"
bitfld.long 0x00 5. "  P5  ,Active Priority 5" "0,1"
bitfld.long 0x00 4. "  P4  ,Active Priority 4" "0,1"
textline "                       "
bitfld.long 0x00 3. " P3  ,Active Priority 3" "0,1"
bitfld.long 0x00 2. "  P2  ,Active Priority 2" "0,1"
bitfld.long 0x00 1. "  P1  ,Active Priority 1" "0,1"
bitfld.long 0x00 0. "  P0  ,Active Priority 0" "0,1"
group.long 0xF8++0x03
line.long 0x00 "GICH_APR2,Active Priorities Register 2"
bitfld.long 0x00 31. "  P31 ,Active Priority 31" "0,1"
bitfld.long 0x00 30. "  P30 ,Active Priority 30" "0,1"
bitfld.long 0x00 29. "  P29 ,Active Priority 29" "0,1"
bitfld.long 0x00 28. "  P28 ,Active Priority 28" "0,1"
textline "                       "
bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1"
bitfld.long 0x00 26. "  P26 ,Active Priority 26" "0,1"
bitfld.long 0x00 25. "  P25 ,Active Priority 25" "0,1"
bitfld.long 0x00 24. "  P24 ,Active Priority 24" "0,1"
textline "                       "
bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1"
bitfld.long 0x00 22. "  P22 ,Active Priority 22" "0,1"
bitfld.long 0x00 21. "  P21 ,Active Priority 21" "0,1"
bitfld.long 0x00 20. "  P20 ,Active Priority 20" "0,1"
textline "                       "
bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1"
bitfld.long 0x00 18. "  P18 ,Active Priority 18" "0,1"
bitfld.long 0x00 17. "  P17 ,Active Priority 17" "0,1"
bitfld.long 0x00 16. "  P16 ,Active Priority 16" "0,1"
textline "                       "
bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1"
bitfld.long 0x00 14. "  P14 ,Active Priority 14" "0,1"
bitfld.long 0x00 13. "  P13 ,Active Priority 13" "0,1"
bitfld.long 0x00 12. "  P12 ,Active Priority 12" "0,1"
textline "                       "
bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1"
bitfld.long 0x00 10. "  P10 ,Active Priority 10" "0,1"
bitfld.long 0x00 9. "  P9  ,Active Priority 9" "0,1"
bitfld.long 0x00 8. "  P8  ,Active Priority 8" "0,1"
textline "                       "
bitfld.long 0x00 7. " P7  ,Active Priority 7" "0,1"
bitfld.long 0x00 6. "  P6  ,Active Priority 6" "0,1"
bitfld.long 0x00 5. "  P5  ,Active Priority 5" "0,1"
bitfld.long 0x00 4. "  P4  ,Active Priority 4" "0,1"
textline "                       "
bitfld.long 0x00 3. " P3  ,Active Priority 3" "0,1"
bitfld.long 0x00 2. "  P2  ,Active Priority 2" "0,1"
bitfld.long 0x00 1. "  P1  ,Active Priority 1" "0,1"
bitfld.long 0x00 0. "  P0  ,Active Priority 0" "0,1"
group.long 0xFC++0x03
line.long 0x00 "GICH_APR3,Active Priorities Register 3"
bitfld.long 0x00 31. "  P31 ,Active Priority 31" "0,1"
bitfld.long 0x00 30. "  P30 ,Active Priority 30" "0,1"
bitfld.long 0x00 29. "  P29 ,Active Priority 29" "0,1"
bitfld.long 0x00 28. "  P28 ,Active Priority 28" "0,1"
textline "                       "
bitfld.long 0x00 27. " P27 ,Active Priority 27" "0,1"
bitfld.long 0x00 26. "  P26 ,Active Priority 26" "0,1"
bitfld.long 0x00 25. "  P25 ,Active Priority 25" "0,1"
bitfld.long 0x00 24. "  P24 ,Active Priority 24" "0,1"
textline "                       "
bitfld.long 0x00 23. " P23 ,Active Priority 23" "0,1"
bitfld.long 0x00 22. "  P22 ,Active Priority 22" "0,1"
bitfld.long 0x00 21. "  P21 ,Active Priority 21" "0,1"
bitfld.long 0x00 20. "  P20 ,Active Priority 20" "0,1"
textline "                       "
bitfld.long 0x00 19. " P19 ,Active Priority 19" "0,1"
bitfld.long 0x00 18. "  P18 ,Active Priority 18" "0,1"
bitfld.long 0x00 17. "  P17 ,Active Priority 17" "0,1"
bitfld.long 0x00 16. "  P16 ,Active Priority 16" "0,1"
textline "                       "
bitfld.long 0x00 15. " P15 ,Active Priority 15" "0,1"
bitfld.long 0x00 14. "  P14 ,Active Priority 14" "0,1"
bitfld.long 0x00 13. "  P13 ,Active Priority 13" "0,1"
bitfld.long 0x00 12. "  P12 ,Active Priority 12" "0,1"
textline "                       "
bitfld.long 0x00 11. " P11 ,Active Priority 11" "0,1"
bitfld.long 0x00 10. "  P10 ,Active Priority 10" "0,1"
bitfld.long 0x00 9. "  P9  ,Active Priority 9" "0,1"
bitfld.long 0x00 8. "  P8  ,Active Priority 8" "0,1"
textline "                       "
bitfld.long 0x00 7. " P7  ,Active Priority 7" "0,1"
bitfld.long 0x00 6. "  P6  ,Active Priority 6" "0,1"
bitfld.long 0x00 5. "  P5  ,Active Priority 5" "0,1"
bitfld.long 0x00 4. "  P4  ,Active Priority 4" "0,1"
textline "                       "
bitfld.long 0x00 3. " P3  ,Active Priority 3" "0,1"
bitfld.long 0x00 2. "  P2  ,Active Priority 2" "0,1"
bitfld.long 0x00 1. "  P1  ,Active Priority 1" "0,1"
bitfld.long 0x00 0. "  P0  ,Active Priority 0" "0,1"
textline "                       "
group.long 0x100++0x03
line.long 0x00 "GICH_LR0,List Register 0"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x104++0x03
line.long 0x00 "GICH_LR1,List Register 1"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x108++0x03
line.long 0x00 "GICH_LR2,List Register 2"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x10C++0x03
line.long 0x00 "GICH_LR3,List Register 3"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x110++0x03
line.long 0x00 "GICH_LR4,List Register 4"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x114++0x03
line.long 0x00 "GICH_LR5,List Register 5"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x118++0x03
line.long 0x00 "GICH_LR6,List Register 6"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x11C++0x03
line.long 0x00 "GICH_LR7,List Register 7"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x120++0x03
line.long 0x00 "GICH_LR8,List Register 8"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x124++0x03
line.long 0x00 "GICH_LR9,List Register 9"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x128++0x03
line.long 0x00 "GICH_LR10,List Register 10"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x12C++0x03
line.long 0x00 "GICH_LR11,List Register 11"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x130++0x03
line.long 0x00 "GICH_LR12,List Register 12"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x134++0x03
line.long 0x00 "GICH_LR13,List Register 13"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
group.long 0x138++0x03
line.long 0x00 "GICH_LR14,List Register 14"
bitfld.long 0x00 31. " HW ,Indicates whether this virtual interrupt is a hardware interrupt" "Software,Hardware"
bitfld.long 0x00 30. "  GROUP ,Indicates whether the interrupt is Group 0 or Group 1" "Group 0,Group 1"
bitfld.long 0x00 28.--29. "  STATE ,The state of the interrupt" "Inactive,Pending,Active,Active/Pending"
bitfld.long 0x00 23.--27. "  PRIORITY ,The priority of this interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x00 10.--19. 1. "  PINTID ,Physical interrupt ID"
hexmask.long.word 0x00 0.--9. 1. "  VINTID ,Virtual interrupt ID"
tree.end
width 0x0b
endif
sif COMP.AVAILABLE("GICV")
base COMP.BASE("GICV",-1.)
width 14.
tree "Virtual CPU Interface"
group.long 0x00++0x03
line.long 0x00 "GICV_CTLR,VM Control Register"
bitfld.long 0x00 9. " EOIMODE    ,Controls the behaviour of Non-secure accesses to GICC_EOIR/GICC_AEOIR/GICC_DIR. PD - Priority Drop / ID - Interrupt Deactivation" "EOIR+AEOIR=PD+ID,EOIR+AEOIR=PD/DIR=ID"
bitfld.long 0x00 4. "  CBPR       ,Controls whether GICV_BPR affects both Group 0 and Group 1 interrupts" "Group 0,Both"
bitfld.long 0x00 3. "       FIQEN ,FIQ Enable" "Disabled,Enabled"
bitfld.long 0x00 2. "      ACKCTL ,Acknowledge control. Return ID of the corresponding interrupt" "1022,Corresponding"
textline "                      "
bitfld.long 0x00 1. "  ENABLEGRP1 ,Enables the signalling of Group 1 interrupts by the CPU interface to the virtual machine" "Disabled,Enabled"
bitfld.long 0x00 0. "              ENABLEGRP0 ,Enables the signalling of Group 0 interrupts by the CPU interface to the virtual machine" "Disabled,Enabled"
group.long 0x04++0x03
line.long 0x00 "GICV_PMR,VM Priority Mask Register"
hexmask.long.byte 0x00 0.--7. 1. " PRIORITY   ,Priority mask level for the virtual CPU interface"
group.long 0x08++0x03
line.long 0x00 "GICV_BPR,VM Binary Point Register"
bitfld.long 0x00 0.--2. " BP         ,Binary point" "0,1,2,3,4,5,6,7"
rgroup.long 0x0C++0x03
line.long 0x00 "GICV_IAR,VM Interrupt Acknowledge Register"
hexmask.long 0x00 0.--24. 1. " INTID      ,Interrupt ID"
wgroup.long 0x10++0x03
line.long 0x00 "GICV_EOIR,VM End Of Interrupt Register"
hexmask.long 0x00 0.--24. 1. " INTID      ,Interrupt ID"
rgroup.long 0x14++0x03
line.long 0x00 "GICV_RPR,VM Running Priority Register"
hexmask.long.byte 0x00 0.--7. 1. " PRIORITY   ,Priority value of highest priority interrupt"
rgroup.long 0x18++0x03
line.long 0x00 "GICV_HPPIR,VM Highest Priority Pending Interrupt Register"
hexmask.long 0x00 0.--24. 1. " INTID      ,Interrupt ID"
group.long 0x1C++0x03
line.long 0x00 "GICV_ABPR,VM Aliased Binary Point Register"
bitfld.long 0x00 0.--2. " BP         ,Binary point" "0,1,2,3,4,5,6,7"
rgroup.long 0x20++0x03
line.long 0x00 "GICV_AIAR,VM Aliased Interrupt Acknowledge Register"
hexmask.long 0x00 0.--24. 1. " INTID      ,Interrupt ID"
wgroup.long 0x24++0x03
line.long 0x00 "GICV_AEOIR,VM Aliased End of Interrupt Register"
hexmask.long 0x00 0.--24. 1. " INTID      ,Interrupt ID"
rgroup.long 0x28++0x03
line.long 0x00 "GICV_AHPPIR,VM Aliased Highest Priority Pending Interrupt Register"
hexmask.long 0x00 0.--24. 1. " INTID      ,Interrupt ID"
textline ""
group.long 0xD0++0x03
line.long 0x00 "GICV_APR0,VM Active Priority Register 0"
bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1"
bitfld.long 0x00 30. "   P30 ,Active Priority 30" "0,1"
bitfld.long 0x00 29. "   P29 ,Active Priority 29" "0,1"
bitfld.long 0x00 28. "   P28 ,Active Priority 28" "0,1"
textline "                      "
bitfld.long 0x00 27. "  P27 ,Active Priority 27" "0,1"
bitfld.long 0x00 26. "   P26 ,Active Priority 26" "0,1"
bitfld.long 0x00 25. "   P25 ,Active Priority 25" "0,1"
bitfld.long 0x00 24. "   P24 ,Active Priority 24" "0,1"
textline "                      "
bitfld.long 0x00 23. "  P23 ,Active Priority 23" "0,1"
bitfld.long 0x00 22. "   P22 ,Active Priority 22" "0,1"
bitfld.long 0x00 21. "   P21 ,Active Priority 21" "0,1"
bitfld.long 0x00 20. "   P20 ,Active Priority 20" "0,1"
textline "                      "
bitfld.long 0x00 19. "  P19 ,Active Priority 19" "0,1"
bitfld.long 0x00 18. "   P18 ,Active Priority 18" "0,1"
bitfld.long 0x00 17. "   P17 ,Active Priority 17" "0,1"
bitfld.long 0x00 16. "   P16 ,Active Priority 16" "0,1"
textline "                      "
bitfld.long 0x00 15. "  P15 ,Active Priority 15" "0,1"
bitfld.long 0x00 14. "   P14 ,Active Priority 14" "0,1"
bitfld.long 0x00 13. "   P13 ,Active Priority 13" "0,1"
bitfld.long 0x00 12. "   P12 ,Active Priority 12" "0,1"
textline "                      "
bitfld.long 0x00 11. "  P11 ,Active Priority 11" "0,1"
bitfld.long 0x00 10. "   P10 ,Active Priority 10" "0,1"
bitfld.long 0x00 9. "   P9  ,Active Priority 9" "0,1"
bitfld.long 0x00 8. "   P8  ,Active Priority 8" "0,1"
textline "                      "
bitfld.long 0x00 7. "  P7  ,Active Priority 7" "0,1"
bitfld.long 0x00 6. "   P6  ,Active Priority 6" "0,1"
bitfld.long 0x00 5. "   P5  ,Active Priority 5" "0,1"
bitfld.long 0x00 4. "   P4  ,Active Priority 4" "0,1"
textline "                      "
bitfld.long 0x00 3. "  P3  ,Active Priority 3" "0,1"
bitfld.long 0x00 2. "   P2  ,Active Priority 2" "0,1"
bitfld.long 0x00 1. "   P1  ,Active Priority 1" "0,1"
bitfld.long 0x00 0. "   P0  ,Active Priority 0" "0,1"
group.long 0xD4++0x03
line.long 0x00 "GICV_APR1,VM Active Priority Register 1"
bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1"
bitfld.long 0x00 30. "   P30 ,Active Priority 30" "0,1"
bitfld.long 0x00 29. "   P29 ,Active Priority 29" "0,1"
bitfld.long 0x00 28. "   P28 ,Active Priority 28" "0,1"
textline "                      "
bitfld.long 0x00 27. "  P27 ,Active Priority 27" "0,1"
bitfld.long 0x00 26. "   P26 ,Active Priority 26" "0,1"
bitfld.long 0x00 25. "   P25 ,Active Priority 25" "0,1"
bitfld.long 0x00 24. "   P24 ,Active Priority 24" "0,1"
textline "                      "
bitfld.long 0x00 23. "  P23 ,Active Priority 23" "0,1"
bitfld.long 0x00 22. "   P22 ,Active Priority 22" "0,1"
bitfld.long 0x00 21. "   P21 ,Active Priority 21" "0,1"
bitfld.long 0x00 20. "   P20 ,Active Priority 20" "0,1"
textline "                      "
bitfld.long 0x00 19. "  P19 ,Active Priority 19" "0,1"
bitfld.long 0x00 18. "   P18 ,Active Priority 18" "0,1"
bitfld.long 0x00 17. "   P17 ,Active Priority 17" "0,1"
bitfld.long 0x00 16. "   P16 ,Active Priority 16" "0,1"
textline "                      "
bitfld.long 0x00 15. "  P15 ,Active Priority 15" "0,1"
bitfld.long 0x00 14. "   P14 ,Active Priority 14" "0,1"
bitfld.long 0x00 13. "   P13 ,Active Priority 13" "0,1"
bitfld.long 0x00 12. "   P12 ,Active Priority 12" "0,1"
textline "                      "
bitfld.long 0x00 11. "  P11 ,Active Priority 11" "0,1"
bitfld.long 0x00 10. "   P10 ,Active Priority 10" "0,1"
bitfld.long 0x00 9. "   P9  ,Active Priority 9" "0,1"
bitfld.long 0x00 8. "   P8  ,Active Priority 8" "0,1"
textline "                      "
bitfld.long 0x00 7. "  P7  ,Active Priority 7" "0,1"
bitfld.long 0x00 6. "   P6  ,Active Priority 6" "0,1"
bitfld.long 0x00 5. "   P5  ,Active Priority 5" "0,1"
bitfld.long 0x00 4. "   P4  ,Active Priority 4" "0,1"
textline "                      "
bitfld.long 0x00 3. "  P3  ,Active Priority 3" "0,1"
bitfld.long 0x00 2. "   P2  ,Active Priority 2" "0,1"
bitfld.long 0x00 1. "   P1  ,Active Priority 1" "0,1"
bitfld.long 0x00 0. "   P0  ,Active Priority 0" "0,1"
group.long 0xD8++0x03
line.long 0x00 "GICV_APR2,VM Active Priority Register 2"
bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1"
bitfld.long 0x00 30. "   P30 ,Active Priority 30" "0,1"
bitfld.long 0x00 29. "   P29 ,Active Priority 29" "0,1"
bitfld.long 0x00 28. "   P28 ,Active Priority 28" "0,1"
textline "                      "
bitfld.long 0x00 27. "  P27 ,Active Priority 27" "0,1"
bitfld.long 0x00 26. "   P26 ,Active Priority 26" "0,1"
bitfld.long 0x00 25. "   P25 ,Active Priority 25" "0,1"
bitfld.long 0x00 24. "   P24 ,Active Priority 24" "0,1"
textline "                      "
bitfld.long 0x00 23. "  P23 ,Active Priority 23" "0,1"
bitfld.long 0x00 22. "   P22 ,Active Priority 22" "0,1"
bitfld.long 0x00 21. "   P21 ,Active Priority 21" "0,1"
bitfld.long 0x00 20. "   P20 ,Active Priority 20" "0,1"
textline "                      "
bitfld.long 0x00 19. "  P19 ,Active Priority 19" "0,1"
bitfld.long 0x00 18. "   P18 ,Active Priority 18" "0,1"
bitfld.long 0x00 17. "   P17 ,Active Priority 17" "0,1"
bitfld.long 0x00 16. "   P16 ,Active Priority 16" "0,1"
textline "                      "
bitfld.long 0x00 15. "  P15 ,Active Priority 15" "0,1"
bitfld.long 0x00 14. "   P14 ,Active Priority 14" "0,1"
bitfld.long 0x00 13. "   P13 ,Active Priority 13" "0,1"
bitfld.long 0x00 12. "   P12 ,Active Priority 12" "0,1"
textline "                      "
bitfld.long 0x00 11. "  P11 ,Active Priority 11" "0,1"
bitfld.long 0x00 10. "   P10 ,Active Priority 10" "0,1"
bitfld.long 0x00 9. "   P9  ,Active Priority 9" "0,1"
bitfld.long 0x00 8. "   P8  ,Active Priority 8" "0,1"
textline "                      "
bitfld.long 0x00 7. "  P7  ,Active Priority 7" "0,1"
bitfld.long 0x00 6. "   P6  ,Active Priority 6" "0,1"
bitfld.long 0x00 5. "   P5  ,Active Priority 5" "0,1"
bitfld.long 0x00 4. "   P4  ,Active Priority 4" "0,1"
textline "                      "
bitfld.long 0x00 3. "  P3  ,Active Priority 3" "0,1"
bitfld.long 0x00 2. "   P2  ,Active Priority 2" "0,1"
bitfld.long 0x00 1. "   P1  ,Active Priority 1" "0,1"
bitfld.long 0x00 0. "   P0  ,Active Priority 0" "0,1"
group.long 0xDC++0x03
line.long 0x00 "GICV_APR3,VM Active Priority Register 3"
bitfld.long 0x00 31. " P31 ,Active Priority 31" "0,1"
bitfld.long 0x00 30. "   P30 ,Active Priority 30" "0,1"
bitfld.long 0x00 29. "   P29 ,Active Priority 29" "0,1"
bitfld.long 0x00 28. "   P28 ,Active Priority 28" "0,1"
textline "                      "
bitfld.long 0x00 27. "  P27 ,Active Priority 27" "0,1"
bitfld.long 0x00 26. "   P26 ,Active Priority 26" "0,1"
bitfld.long 0x00 25. "   P25 ,Active Priority 25" "0,1"
bitfld.long 0x00 24. "   P24 ,Active Priority 24" "0,1"
textline "                      "
bitfld.long 0x00 23. "  P23 ,Active Priority 23" "0,1"
bitfld.long 0x00 22. "   P22 ,Active Priority 22" "0,1"
bitfld.long 0x00 21. "   P21 ,Active Priority 21" "0,1"
bitfld.long 0x00 20. "   P20 ,Active Priority 20" "0,1"
textline "                      "
bitfld.long 0x00 19. "  P19 ,Active Priority 19" "0,1"
bitfld.long 0x00 18. "   P18 ,Active Priority 18" "0,1"
bitfld.long 0x00 17. "   P17 ,Active Priority 17" "0,1"
bitfld.long 0x00 16. "   P16 ,Active Priority 16" "0,1"
textline "                      "
bitfld.long 0x00 15. "  P15 ,Active Priority 15" "0,1"
bitfld.long 0x00 14. "   P14 ,Active Priority 14" "0,1"
bitfld.long 0x00 13. "   P13 ,Active Priority 13" "0,1"
bitfld.long 0x00 12. "   P12 ,Active Priority 12" "0,1"
textline "                      "
bitfld.long 0x00 11. "  P11 ,Active Priority 11" "0,1"
bitfld.long 0x00 10. "   P10 ,Active Priority 10" "0,1"
bitfld.long 0x00 9. "   P9  ,Active Priority 9" "0,1"
bitfld.long 0x00 8. "   P8  ,Active Priority 8" "0,1"
textline "                      "
bitfld.long 0x00 7. "  P7  ,Active Priority 7" "0,1"
bitfld.long 0x00 6. "   P6  ,Active Priority 6" "0,1"
bitfld.long 0x00 5. "   P5  ,Active Priority 5" "0,1"
bitfld.long 0x00 4. "   P4  ,Active Priority 4" "0,1"
textline "                      "
bitfld.long 0x00 3. "  P3  ,Active Priority 3" "0,1"
bitfld.long 0x00 2. "   P2  ,Active Priority 2" "0,1"
bitfld.long 0x00 1. "   P1  ,Active Priority 1" "0,1"
bitfld.long 0x00 0. "   P0  ,Active Priority 0" "0,1"
textline "                      "
rgroup.long 0xFC++0x03
line.long 0x00 "GICV_IIDR,Virtual Machine CPU Interface Identification Register"
hexmask.long.word 0x00 20.--31. 1. " PRODID     ,Product ID"
bitfld.long 0x00 16.--19. "    ARCHVER ,The version of the GIC architecture that is implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 12.--15. "  REV ,Revision number for the CPU interface" ",,,GICv3,?..."
hexmask.long.word 0x00 0.--11. 1. "  IMP ,Implementer"
wgroup.long 0x1000++0x03
line.long 0x00 "GICV_DIR,VM Deactivate Interrupt Register"
hexmask.long 0x00 0.--24. 1. " INTID      ,Interrupt ID"
tree.end
width 0x0b
endif
width 0x0B
tree.end
tree.end
autoindent.on center tree
tree "Reset Clocking And Initialization Registers"
tree "RST (Reset Registers)"
base ad:0x01E60000
group.long 0x00++0x07
line.long 0x00 "RSTCR,Reset Control Register"
bitfld.long 0x00 1. "RESET_REQ,Hardware reset request" "Not requested,Requested"
line.long 0x04 "RSTCRSP,Service Processor Reset Control Register"
bitfld.long 0x04 1. "RESET_REQ,Hardware reset request" "Not requested,Requested"
group.long 0x10++0x03
line.long 0x00 "RSTRQMR1,Reset Request Mask Register"
bitfld.long 0x00 20. "SRDS_RST_MSK,SerDes reset request event mask" "Not masked,Masked"
bitfld.long 0x00 19. "RPTOE_MSK,RCPM Time Out reset request event mask" "Not masked,Masked"
bitfld.long 0x00 17. "MBEE_MSK,Multi-bit ECC error reset request mask" "Not masked,Masked"
bitfld.long 0x00 16. "SDC_MSK,Security Debug Controller error reset request mask" "Not masked,Masked"
newline
bitfld.long 0x00 14. "SFP_MSK,Security Fuse Processor error during POR fuse process reset mask" "Not masked,Masked"
bitfld.long 0x00 13. "SP_MSK,Service Processor error reset mask" "Not masked,Masked"
group.long 0x18++0x03
line.long 0x00 "RSTRQSR1,Reset Request Status Register"
eventfld.long 0x00 22. "TZONE_WDT_RR,TrustZone WDOG reset request" "Not requested,Requested"
eventfld.long 0x00 21. "SP_WDT_RR,Service Processor WDOG reset request" "Not requested,Requested"
eventfld.long 0x00 20. "SRDS_RST_RR,SerDes reset event" "Not requested,Requested"
eventfld.long 0x00 19. "RPTOE_RR,RCPM Time Out reset request event" "Not requested,Requested"
newline
eventfld.long 0x00 17. "MBEE_RR,Multi-bit ECC reset request" "Not requested,Requested"
eventfld.long 0x00 16. "SDC_RR,Security Debug Controller reset request" "Not requested,Requested"
eventfld.long 0x00 15. "SECM_RR,Security Monitor error during POR fuse process caused reset request" "Not requested,Requested"
eventfld.long 0x00 14. "SFP_RR,Security Fuse Processor error during POR fuse process caused reset request" "Not requested,Requested"
newline
eventfld.long 0x00 13. "SP_RR,Service Processor reset request" "Not requested,Requested"
eventfld.long 0x00 11. "SW_RR,Software settable reset requested" "Not requested,Requested"
eventfld.long 0x00 10. "WDT_RR,WD reset requested" "Not requested,Requested"
group.long 0x20++0x03
line.long 0x00 "RSTRQWDTMRL,Reset Request WDT Mask Register"
bitfld.long 0x00 1. "WDT_MSK1,Core 1 WDT reset request mask" "Not masked,Masked"
bitfld.long 0x00 0. "WDT_MSK0,Core 0 WDT reset request mask" "Not masked,Masked"
group.long 0x30++0x03
line.long 0x00 "RSTRQWDTSRL,Reset Request WDT Status Register"
eventfld.long 0x00 1. "WDT_RR1,WDT reset request status" "Not requested,Requested"
eventfld.long 0x00 0. "WDT_RR0,WDT reset request status" "Not requested,Requested"
group.long 0x60++0x03
line.long 0x00 "BRRL,Boot Release Register"
bitfld.long 0x00 1. "CR1,Core 1 release for booting" "Not released,Released"
bitfld.long 0x00 0. "CR0,Core 0 release for booting" "Not released,Released"
rgroup.long 0x90++0x03
line.long 0x00 "BRCORENBR,Core Enable Boot Release Status Register"
abitfld.long 0x00 0.--5. "CORE_NBR,Designates which core will begin booting out of reset" "0x00=Core 0,0x01=Core 1"
rgroup.long 0x100++0x03
line.long 0x00 "RCW_REQR,RCW Request Register"
bitfld.long 0x00 0. "RQ,Service Processor was requested for RCW loading" "Not requested,Requested"
group.long 0x104++0x03
line.long 0x00 "RCW_COMPLETIONR,RCW Completion Register"
hexmask.long.byte 0x00 16.--23. 1. "ERR_CODE,RCW error code"
bitfld.long 0x00 0. "DONE,RCW done bit" "Not done,Done"
rgroup.long 0x110++0x03
line.long 0x00 "PBI_REQR,PBI Request Register"
bitfld.long 0x00 0. "RQ,Service Processor was requested for PBI phase" "Not requested,Requested"
group.long 0x114++0x03
line.long 0x00 "PBI_COMPLETIONR,PBI Completion Register"
hexmask.long.byte 0x00 16.--23. 1. "ERR_CODE,PBI error code"
bitfld.long 0x00 0. "DONE,PBI done bit" "Not done,Done"
repeat 2. (increment 0x400 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "CRSTSR$2,Core Reset Status Register $2"
eventfld.long 0x00 11. "RST_CORE[3],Core was reset in response to internal core request to reset itself by setting bit DBCR0[RST] register" "No reset,Reset"
eventfld.long 0x00 10. "[2],Core was reset in response to internal core request to reset itself by setting bit DBCR0[RST] register" "No reset,Reset"
eventfld.long 0x00 9. "[1],Core was reset in response to internal core request to reset itself by setting bit DBCR0[RST] register" "No reset,Reset"
eventfld.long 0x00 8. "[0],Core was reset in response to internal core request to reset itself by setting bit DBCR0[RST] register" "No reset,Reset"
newline
rbitfld.long 0x00 2. "READY,Core ready pin" "Not ready,Ready"
eventfld.long 0x00 1. "RST_HRST,Core was reset due to an HRESET" "No reset,Reset"
eventfld.long 0x00 0. "RST_PORST,Core was reset due to a PORESET" "No reset,Reset"
repeat.end
rgroup.long 0xBF8++0x07
line.long 0x00 "IP_REV1,IP Block Revision Register 1"
hexmask.long.word 0x00 16.--31. 1. "IP_ID,Block ID"
hexmask.long.byte 0x00 8.--15. 1. "IP_MJ,Major revision"
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "IP_REV2,IP Block Revision Register 2"
hexmask.long.byte 0x04 16.--23. 1. "IP_INT,Block ID"
hexmask.long.byte 0x04 0.--7. 1. "IP_CFG,IP block configuration ID"
tree.end
tree "CGU_P (Platform CGU CCSR)"
base ad:0x01360000
group.long 0x00++0x03
line.long 0x00 "CLKCSR,Platform Clock Control/Status Register"
bitfld.long 0x00 16. "CLKOEN1,CLKOUT pad enable" "Disabled,Enabled"
bitfld.long 0x00 11.--15. "CLKOSEL1,Observation signal select" ",,,,,,,,,,,,,,,,,,,,,,,,platform_pll_vco_out_div8,platform_pll_vco_out_div6,platform_pll_clk_out_div4,platform_pll_clk_out_div2,platform_pll_clk_out,platform_pll_vco_bufout,platform_pll_fdbk_bufout,platform_pll_sys_bufout"
bitfld.long 0x00 9.--10. "CLKODIV1,Select division setting for clockout mux output" "/1,/2,/4,/8"
tree.end
tree "CGU_CGA (CGU Cluster CCSR)"
base ad:0x01300000
repeat 4. (increment 0x10 0x20)(increment 1. 1.)(list 1. 2. 1. 2.)(list 2. 1. 2. 1.)
group.long $1++0x03
line.long 0x00 "HWA$2CSR,HW Accelerator Clock Frequency Selection Control Register $2"
bitfld.long 0x00 27.--30. "HWACLKSEL,HW accelerator clock frequency selection" "Platform clock,PLL$3/1,PLL$3/2,PLL$3/3,PLL$3/4,,PLL$4/2,PLL$4/3,?..."
repeat.end
tree.end
tree "COPCLK (CCU CCSR)"
base ad:0x01370000
group.long 0x00++0x03
line.long 0x00 "CLKC1CSR,Core Cluster 1 Clock Control/Status Register"
bitfld.long 0x00 27.--30. "CLKSEL[3:0],Clock source select" "PLL1 output,PLL1/2,PLL1/4,,PLL2 output,PLL2/2,PLL2/4,?..."
tree.end
tree "CGU_DDR (CGU DDR CCSR)"
base ad:0x01380000
group.long 0x00++0x03
line.long 0x00 "CLKCSR,DDR Clock Control/Status Register"
bitfld.long 0x00 27.--30. "CLKSEL[3:0],CGU feed forward divider select" "No divide,/2,?..."
tree.end
tree.end
tree "ISC (Interrupts Sampling Registers)"
base ad:0x01F70000
rgroup.long 0x20++0x03
line.long 0x00 "TWDTSR0,Thread WatchDog Reset Timer Status Register"
bitfld.long 0x00 1. "TWDTSTAT1,Core 1 thread watchdog timer status" "Not occurred,Occurred"
bitfld.long 0x00 0. "TWDTSTAT0,Core 0 thread watchdog timer status" "Not occurred,Occurred"
group.long 0x40++0x03
line.long 0x00 "TWDTCR,Thread WatchDog Reset Timer Control Register"
bitfld.long 0x00 0. "INT_EN,Interrupt enable" "Disabled,Enabled"
rgroup.long 0x60++0x03
line.long 0x00 "SWDTSR,SoC WatchDog Reset Timer Status Register"
bitfld.long 0x00 1. "SWDTSTAT1,TrustZone watchdog timer status" "Not occurred,Occurred"
bitfld.long 0x00 0. "SWDTSTAT0,Service processor watchdog timer status" "Not occurred,Occurred"
tree.end
tree "SCFG (Supplement Configuration Unit)"
base ad:0x01FC0000
group.long 0x230++0x0B
line.long 0x00 "EDP_PHY_RESET,eDP PHY Reset Register"
bitfld.long 0x00 0. "EDP_PHY_RESETN,eDP PHY reset" "Reset,No reset"
line.long 0x04 "ECC_SBIT_ERR_EN,ECC Single Bit Error Enable Register"
bitfld.long 0x04 1. "EDP_LCD_SBIT_ECC_ERR_EN,eDP LCD single bit error output enable" "Disabled,Enabled"
bitfld.long 0x04 0. "GPU_SBIT_ECC_ERR_EN,GPU single bit error output enable" "Disabled,Enabled"
line.long 0x08 "ECC_MBIT_ERR_EN,ECC Multi Bit Error Enable Register"
bitfld.long 0x08 1. "EDP_LCD_MBIT_ECC_ERR_EN,eDP LCD multi bit error output enable" "Disabled,Enabled"
bitfld.long 0x08 0. "GPU_MBIT_ECC_ERR_EN,GPU multi bit error output enable" "Disabled,Enabled"
tree.end
tree "DCFG (Device Configuration Unit)"
base ad:0x01E00000
rgroup.long 0x00++0x07
line.long 0x00 "PORSR1,POR Status Register 1"
bitfld.long 0x00 23.--26. "RCW_SRC,Reset configuration word source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "PORSR2,POR Status Register 2"
bitfld.long 0x04 30.--31. "SVR_VER,System version register version" "0,1,2,3"
bitfld.long 0x04 29. "DRAM_TYPE,DRAM type selector" "DDR4,DDR3L"
rgroup.long 0x20++0x03
line.long 0x00 "GPPORCR$2,General-Purpose POR Configuration Register $2"
hexmask.long.byte 0x00 0.--7. 1. "POR_CFG_VEC,General-purpose POR configuration vector"
rgroup.long 0x60++0x03
line.long 0x00 "FUSESR,Fuse Status Register"
bitfld.long 0x00 25.--29. "DA_V,Minimum voltage required to reach the frequency specified" "1.0000 V,,,,,,,,0.9 V,,,,,,,,1.0000 V,?..."
bitfld.long 0x00 20.--24. "DA_ALT_V,Secondary voltage field for VDD" "1.0000 V,,,,,,,,0.9 V,,,,,,,,1.0000 V,?..."
group.long 0x70++0x17
line.long 0x00 "DEVDISR1,Device Disable Register 1"
bitfld.long 0x00 22. "SEC,SEC disable" "No,Yes"
bitfld.long 0x00 16. "SATA1,SATA1/SAS1/FC1 disable" "No,Yes"
newline
bitfld.long 0x00 13. "USB2,USB2 disable" "No,Yes"
bitfld.long 0x00 12. "USB1,USB1 disable" "No,Yes"
newline
bitfld.long 0x00 11. "EDMA,eDMA and eDMA channel muxes disable" "No,Yes"
bitfld.long 0x00 10. "ESDHC2,eSDHC2 disable" "No,Yes"
newline
bitfld.long 0x00 8. "QDMA,QDMA disable" "No,Yes"
bitfld.long 0x00 2. "ESDHC1,eSDHC1 disable" "No,Yes"
line.long 0x04 "DEVDISR2,Device Disable Register 2"
bitfld.long 0x04 31. "ENETC,ENETC disable" "No,Yes"
bitfld.long 0x04 24. "TSN,TSN disable" "No,Yes"
newline
bitfld.long 0x04 5. "TSN_MAC_6,TSN_MAC_6 disable" "No,Yes"
bitfld.long 0x04 4. "TSN_MAC_5,TSN_MAC_5 disable" "No,Yes"
newline
bitfld.long 0x04 3. "TSN_MAC_4,TSN_MAC_4 disable" "No,Yes"
bitfld.long 0x04 2. "TSN_MAC_3,TSN_MAC_3 disable" "No,Yes"
newline
bitfld.long 0x04 1. "TSN_MAC_2,TSN_MAC_2 disable" "No,Yes"
bitfld.long 0x04 0. "TSN_MAC_1,TSN_MAC_1 disable" "No,Yes"
line.long 0x08 "DEVDISR3,Device Disable Register 3"
bitfld.long 0x08 1. "PEX2,PEX2 disable" "No,Yes"
bitfld.long 0x08 0. "PEX1,PEX1 disable" "No,Yes"
line.long 0x0C "DEVDISR4,Device Disable Register 4"
bitfld.long 0x0C 10. "I2C7_8,I2C7-8 disable" "No,Yes"
bitfld.long 0x0C 9. "I2C4_6,I2C4-6 disable" "No,Yes"
newline
bitfld.long 0x0C 8. "I2C3,I2C3 disable" "No,Yes"
bitfld.long 0x0C 5. "SPI,DSPI/DSPI2 disable" "No,Yes"
newline
bitfld.long 0x0C 4. "FLEXSPI,FlexSPI disable" "No,Yes"
bitfld.long 0x0C 3. "LPUART,LPUARTs disable" "No,Yes"
newline
bitfld.long 0x0C 2. "DUART1,DUART1 disable" "No,Yes"
bitfld.long 0x0C 1. "I2C2,I2C2 disable" "No,Yes"
newline
bitfld.long 0x0C 0. "I2C1,I2C1 disable" "No,Yes"
line.long 0x10 "DEVDISR5,Device Disable Register 5"
bitfld.long 0x10 19. "SAI,SAI disable" "No,Yes"
bitfld.long 0x10 17. "CAN,CAN disable" "No,Yes"
newline
bitfld.long 0x10 15. "FLEXTIMERS5_8,FlexTimers5-8 disable" "No,Yes"
bitfld.long 0x10 14. "FLEXTIMERS1_4,FlexTimers1-4 disable" "No,Yes"
newline
bitfld.long 0x10 13. "TMU,TMU disable" "No,Yes"
bitfld.long 0x10 12. "OCRAM,OCRAM disable" "No,Yes"
newline
bitfld.long 0x10 10. "DBG,DBG disable" "No,Yes"
bitfld.long 0x10 9. "GPIO,GPIO disable" "No,Yes"
newline
bitfld.long 0x10 0. "DDR1,DDR1 disable" "No,Yes"
line.long 0x14 "DEVDISR6,Device Disable Register 6"
bitfld.long 0x14 14. "DISPLAY,Display disable" "No,Yes"
bitfld.long 0x14 12. "GPU,GPU disable" "No,Yes"
hgroup.long 0x144++0x03
hide.long 0x00 "DEVDISR7,Device Disable Register 7"
group.long 0x94++0x03
line.long 0x00 "COREDISR,Core Disable Register"
bitfld.long 0x00 1. "CD1,Core 1 disable" "No,Yes"
bitfld.long 0x00 0. "CD0,Core 0 disable" "No,Yes"
rgroup.long 0xA4++0x03
line.long 0x00 "SVR,System Version Register"
hexmask.long.byte 0x00 28.--31. 0x10 "MFR_ID,Manufacturer ID"
hexmask.long.byte 0x00 24.--27. 0x01 "FAMILY,Family"
newline
hexmask.long.byte 0x00 16.--21. 0x01 "SOC_DEV_ID,SoC device ID"
bitfld.long 0x00 13. "VAR_PER[5],Dual core personality selection" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "VAR_PER[2],Multimedia personality selection" "Display,Non-display"
bitfld.long 0x00 8. "VAR_PER[0],Cryptography personality selection" "SEC,Non-SEC"
newline
hexmask.long.byte 0x00 4.--7. 0x10 "MAJOR_REV,Major revision number"
hexmask.long.byte 0x00 0.--3. 1. "MINOR_REV,Minor revision number"
rgroup.long 0x100++0x07
line.long 0x00 "RCWSR1,Reset Configuration Word Status Register 1"
bitfld.long 0x00 26.--31. "CGA_PLL1_RAT,Cluster group A PLL 1 multiplier/ratio" ",,,,,,,,8:1,9:1,10:1,11:1,12:1,13:1,14:1,15:1,?..."
bitfld.long 0x00 24.--25. "CGA_PLL1_CFG,Cluster group A PLL 1 configuration" "All valid cluster group A PLL frequencies,?..."
newline
bitfld.long 0x00 10.--15. "MEM_PLL_RAT,Memory controller complex PLL multiplier/ratio" ",,,,,,,,,,,,,13:1,14:1,15:1,16:1,?..."
bitfld.long 0x00 8.--9. "MEM_PLL_CFG,Memory controller complex PLL configuration" "All valid DDR PLL frequencies,?..."
newline
bitfld.long 0x00 2.--6. "SYS_PLL_RAT,System PLL multiplier/ratio" ",,,3:1,4:1,?..."
bitfld.long 0x00 0.--1. "SYS_PLL_CFG,System PLL configuration" "For all valid Platform PLL frequencies,?..."
line.long 0x04 "RCWSR2,Reset Configuration Word Status Register 2"
bitfld.long 0x04 2.--7. "CGA_PLL2_RAT,Cluster group A PLL 2 multiplier/ratio" ",,,,,,,,8:1,9:1,10:1,11:1,12:1,13:1,14:1,15:1,?..."
bitfld.long 0x04 0.--1. "CGA_PLL2_CFG,Cluster group A PLL 2 configuration" "All valid cluster group A PLL frequencies,?..."
hgroup.long 0x108++0x03
hide.long 0x00 "RCWSR3,Reset Configuration Word Status 3"
hgroup.long 0x10C++0x03
hide.long 0x00 "RCWSR4,Reset Configuration Word Status 4"
if (((per.l(ad:0x01E00000+0x110))&0x30)==0x30)
rgroup.long 0x110++0x0B
line.long 0x00 "RCWSR5,Reset Configuration Word Status Register 5"
bitfld.long 0x00 16.--19. "C1_PLL_SEL,Cluster 1 PLL select" "CGA_PLL1 /1,,CGA_PLL1 /2,,CGA_PLL2 /1,,CGA_PLL2 /2,?..."
bitfld.long 0x00 5. "CGA_PLL2_SPD,Cluster group A PLL 2 speed select" ">=1000MHz,<1000MHz"
newline
bitfld.long 0x00 4. "CGA_PLL1_SPD,Cluster group A PLL 1 speed select" ">=1000MHz,<1000MHz"
bitfld.long 0x00 1. "MEM_PLL_SPD,Memory controller complex PLL speed select" "0,?..."
newline
bitfld.long 0x00 0. "SYS_PLL_SPD,System PLL speed select" ">=400MHz,<400MHz"
line.long 0x04 "RCWSR6,Reset Configuration Word Status Register 6"
bitfld.long 0x04 22.--24. "HWA_CGA_M3_CLK_SEL,Hardware accelerator block cluster group A mux 3 clock select" ",Async mode PLL2 /1,,Async mode PLL2 /1.5,Async mode PLL2 /2,,,Async mode PLL1 /1.5"
bitfld.long 0x04 19.--21. "HWA_CGA_M2_CLK_SEL,Hardware accelerator block cluster group A mux 2 clock select" ",Async mode PLL2 /1,,Async mode PLL2 /1.5,Async mode PLL2 /2,,,Async mode PLL1 /1.5"
newline
bitfld.long 0x04 16.--18. "HWA_CGA_M1_CLK_SEL,Hardware accelerator block cluster group A mux 1 clock select" ",Async mode PLL2 /1,,Async mode PLL2 /1.5,Async mode PLL2 /2,,,Async mode PLL1 /1.5"
line.long 0x08 "RCWSR7,Reset Configuration Word Status Register 7"
bitfld.long 0x08 23. "DDR_RATE,DDR data rate" "0,1"
bitfld.long 0x08 21.--22. "DRAM_LAT,DDR latency" ",8-8-8/9-9-9/10-10-10/11-11-11 or higher,?..."
newline
bitfld.long 0x08 19.--20. "DDR_REFCLK_SEL,DDR reference clock selection" ",,System,?..."
bitfld.long 0x08 14.--16. "HWA_CGA_M4_CLK_SEL,Hardware accelerator block cluster group A mux 4 clock select" "Platform clock,Async mode PLL2 /1,,Async mode PLL2 /1.5,Async mode PLL2 /2,,,Async mode PLL1 /1.5"
elif (((per.l(ad:0x01E00000+0x110))&0x30)==0x20)
rgroup.long 0x110++0x0B
line.long 0x00 "RCWSR5,Reset Configuration Word Status Register 5"
bitfld.long 0x00 16.--19. "C1_PLL_SEL,Cluster 1 PLL select" "CGA_PLL1 /1,CGA_PLL1 /2,CGA_PLL1 /4,,CGA_PLL2 /1,,CGA_PLL2 /2,?..."
bitfld.long 0x00 5. "CGA_PLL2_SPD,Cluster group A PLL 2 speed select" ">=1000MHz,<1000MHz"
newline
bitfld.long 0x00 4. "CGA_PLL1_SPD,Cluster group A PLL 1 speed select" ">=1000MHz,<1000MHz"
bitfld.long 0x00 1. "MEM_PLL_SPD,Memory controller complex PLL speed select" "0,?..."
newline
bitfld.long 0x00 0. "SYS_PLL_SPD,System PLL speed select" ">=400MHz,<400MHz"
line.long 0x04 "RCWSR6,Reset Configuration Word Status Register 6"
bitfld.long 0x04 22.--24. "HWA_CGA_M3_CLK_SEL,Hardware accelerator block cluster group A mux 3 clock select" ",Async mode PLL2 /1,,Async mode PLL2 /1.5,Async mode PLL2 /2,,Async mode PLL1 /2,Async mode PLL1 /3"
bitfld.long 0x04 19.--21. "HWA_CGA_M2_CLK_SEL,Hardware accelerator block cluster group A mux 2 clock select" ",Async mode PLL2 /1,,Async mode PLL2 /1.5,Async mode PLL2 /2,,Async mode PLL1 /2,Async mode PLL1 /3"
newline
bitfld.long 0x04 16.--18. "HWA_CGA_M1_CLK_SEL,Hardware accelerator block cluster group A mux 1 clock select" ",Async mode PLL2 /1,,Async mode PLL2 /1.5,Async mode PLL2 /2,,Async mode PLL1 /2,Async mode PLL1 /3"
line.long 0x08 "RCWSR7,Reset Configuration Word Status Register 7"
bitfld.long 0x08 23. "DDR_RATE,DDR data rate" "0,1"
bitfld.long 0x08 21.--22. "DRAM_LAT,DDR latency" ",8-8-8/9-9-9/10-10-10/11-11-11 or higher,?..."
newline
bitfld.long 0x08 19.--20. "DDR_REFCLK_SEL,DDR reference clock selection" ",,System,?..."
bitfld.long 0x08 14.--16. "HWA_CGA_M4_CLK_SEL,Hardware accelerator block cluster group A mux 4 clock select" "Platform clock,Async mode PLL2 /1,,Async mode PLL2 /1.5,Async mode PLL2 /2,,Async mode PLL1 /2,Async mode PLL1 /3"
elif (((per.l(ad:0x01E00000+0x110))&0x30)==0x10)
rgroup.long 0x110++0x0B
line.long 0x00 "RCWSR5,Reset Configuration Word Status Register 5"
bitfld.long 0x00 16.--19. "C1_PLL_SEL,Cluster 1 PLL select" "CGA_PLL1 /1,,CGA_PLL1 /2,,CGA_PLL2 /1,CGA_PLL2 /2,CGA_PLL2 /4,?..."
bitfld.long 0x00 5. "CGA_PLL2_SPD,Cluster group A PLL 2 speed select" ">=1000MHz,<1000MHz"
newline
bitfld.long 0x00 4. "CGA_PLL1_SPD,Cluster group A PLL 1 speed select" ">=1000MHz,<1000MHz"
bitfld.long 0x00 1. "MEM_PLL_SPD,Memory controller complex PLL speed select" "0,?..."
newline
bitfld.long 0x00 0. "SYS_PLL_SPD,System PLL speed select" ">=400MHz,<400MHz"
line.long 0x04 "RCWSR6,Reset Configuration Word Status Register 6"
bitfld.long 0x04 22.--24. "HWA_CGA_M3_CLK_SEL,Hardware accelerator block cluster group A mux 3 clock select" ",Async mode PLL2 /1,Async mode PLL2 /2,Async mode PLL2 /3,Async mode PLL2 /4,,,Async mode PLL1 /1.5"
bitfld.long 0x04 19.--21. "HWA_CGA_M2_CLK_SEL,Hardware accelerator block cluster group A mux 2 clock select" ",Async mode PLL2 /1,Async mode PLL2 /2,Async mode PLL2 /3,Async mode PLL2 /4,,,Async mode PLL1 /1.5"
newline
bitfld.long 0x04 16.--18. "HWA_CGA_M1_CLK_SEL,Hardware accelerator block cluster group A mux 1 clock select" ",Async mode PLL2 /1,Async mode PLL2 /2,Async mode PLL2 /3,Async mode PLL2 /4,,,Async mode PLL1 /1.5"
line.long 0x08 "RCWSR7,Reset Configuration Word Status Register 7"
bitfld.long 0x08 23. "DDR_RATE,DDR data rate" "0,1"
bitfld.long 0x08 21.--22. "DRAM_LAT,DDR latency" ",8-8-8/9-9-9/10-10-10/11-11-11 or higher,?..."
newline
bitfld.long 0x08 19.--20. "DDR_REFCLK_SEL,DDR reference clock selection" ",,System,?..."
bitfld.long 0x08 14.--16. "HWA_CGA_M4_CLK_SEL,Hardware accelerator block cluster group A mux 4 clock select" "Platform clock,Async mode PLL2 /1,Async mode PLL2 /2,Async mode PLL2 /3,Async mode PLL2 /4,,,Async mode PLL1 /1.5"
else
rgroup.long 0x110++0x0B
line.long 0x00 "RCWSR5,Reset Configuration Word Status Register 5"
bitfld.long 0x00 16.--19. "C1_PLL_SEL,Cluster 1 PLL select" "CGA_PLL1 /1,CGA_PLL1 /2,CGA_PLL1 /4,,CGA_PLL2 /1,CGA_PLL2 /2,CGA_PLL2 /4,?..."
bitfld.long 0x00 5. "CGA_PLL2_SPD,Cluster group A PLL 2 speed select" ">=1000MHz,<1000MHz"
newline
bitfld.long 0x00 4. "CGA_PLL1_SPD,Cluster group A PLL 1 speed select" ">=1000MHz,<1000MHz"
bitfld.long 0x00 1. "MEM_PLL_SPD,Memory controller complex PLL speed select" "0,?..."
newline
bitfld.long 0x00 0. "SYS_PLL_SPD,System PLL speed select" ">=400MHz,<400MHz"
line.long 0x04 "RCWSR6,Reset Configuration Word Status Register 6"
bitfld.long 0x04 22.--24. "HWA_CGA_M3_CLK_SEL,Hardware accelerator block cluster group A mux 3 clock select" ",Async mode PLL2 /1,Async mode PLL2 /2,Async mode PLL2 /3,Async mode PLL2 /4,,Async mode PLL1 /2,Async mode PLL1 /3"
bitfld.long 0x04 19.--21. "HWA_CGA_M2_CLK_SEL,Hardware accelerator block cluster group A mux 2 clock select" ",Async mode PLL2 /1,Async mode PLL2 /2,Async mode PLL2 /3,Async mode PLL2 /4,,Async mode PLL1 /2,Async mode PLL1 /3"
newline
bitfld.long 0x04 16.--18. "HWA_CGA_M1_CLK_SEL,Hardware accelerator block cluster group A mux 1 clock select" ",Async mode PLL2 /1,Async mode PLL2 /2,Async mode PLL2 /3,Async mode PLL2 /4,,Async mode PLL1 /2,Async mode PLL1 /3"
line.long 0x08 "RCWSR7,Reset Configuration Word Status Register 7"
bitfld.long 0x08 23. "DDR_RATE,DDR data rate" "0,1"
bitfld.long 0x08 21.--22. "DRAM_LAT,DDR latency" ",8-8-8/9-9-9/10-10-10/11-11-11 or higher,?..."
newline
bitfld.long 0x08 19.--20. "DDR_REFCLK_SEL,DDR reference clock selection" ",,System,?..."
bitfld.long 0x08 14.--16. "HWA_CGA_M4_CLK_SEL,Hardware accelerator block cluster group A mux 4 clock select" "Platform clock,Async mode PLL2 /1,Async mode PLL2 /2,Async mode PLL2 /3,Async mode PLL2 /4,,Async mode PLL1 /2,Async mode PLL1 /3"
endif
rgroup.long 0x11C++0x0B
line.long 0x00 "RCWSR8,Reset Configuration Word Status Register 8"
bitfld.long 0x00 5.--6. "DDR_FDBK_MULT,DDR PLL feedback path selection and multiplication enabler" "0,?..."
line.long 0x04 "RCWSR9,Reset Configuration Word Status Register 9"
hexmask.long.word 0x04 20.--31. 1. "PBI_LENGTH,Pre-Boot initialization length"
bitfld.long 0x04 12.--13. "FLASH_CFG1,NAND Flash configuration 1" "Not addressable/not multiplane,Not addressable/multiplane,Addressable/not multiplane,Addressable/multiplane"
newline
bitfld.long 0x04 10. "SB_EN,Secure boot enable" "Disabled,Enabled"
bitfld.long 0x04 9. "BOOT_HO,Boot holdoff" "All cores except core 0 in hold off,All cores in hold off"
newline
bitfld.long 0x04 4.--8. "BOOT_LOC,Boot location" "PCIe1,PCIe2,PCIe3,PCIe4,,,,,,,,,,,,,,,,,Memory Complex,OCRAM,,,IFC,,Serial NOR,?..."
line.long 0x08 "RCWSR10,Reset Configuration Word Status Register 10"
bitfld.long 0x08 23. "GPIO_LED_EN,GPIO LED enable" "Disabled,Enabled"
hexmask.long.byte 0x08 16.--22. 1. "GPIO_LED_NUM,GPIO LED number"
newline
abitfld.long 0x08 4.--13. 1. "SYSCLK_FREQ,System clock frequency" "0x358=100Mhz"
bitfld.long 0x08 0. "SDBGEN,Secure debug enable" "Disabled,Enabled"
hgroup.long 0x128++0x03
hide.long 0x00 "RCWSR11,Reset Configuration Word Status Register 11"
rgroup.long 0x12C++0x0B
line.long 0x00 "RCWSR12,Reset Configuration Word Status Register 12"
bitfld.long 0x00 24.--26. "SDHC1_BASE_PMUX,SDHC1 base pin configuration" "SDHC1,GPIO,SPI1,SAI_TX,SAI_RX,?..."
bitfld.long 0x00 21.--23. "XSPI1_A_BASE_PMUX,XSPI1_A pins configuration" "XSPI1_A,GPIO,,,FTM8,?..."
newline
bitfld.long 0x00 18.--20. "XSPI1_A_DATA30_PMUX,XSPI1_A_DATA[3:0] pin configuration" "XSPI1_A,GPIO,,LPUART3,FTM3,?..."
bitfld.long 0x00 15.--17. "XSPI1_A_DATA74_PMUX,XSPI1_A_DATA[7:4] pin configuration" "XSPI1_A,GPIO,,LPUART2,FTM2,?..."
newline
bitfld.long 0x00 12.--14. "IIC6_PMUX,IIC6 pin configuration" "IIC6,GPIO,SDHC2,USB2,,,EVT3/EVT0,?..."
bitfld.long 0x00 9.--11. "IIC5_PMUX,IIC5 pin configuration" "IIC5,GPIO,SDHC1,,,,EVT1/EVT2,?..."
newline
bitfld.long 0x00 6.--8. "IIC4_PMUX,IIC4 pin configuration" "IIC4,GPIO,CAN2,LPUART1,FTM7,,EVT,?..."
bitfld.long 0x00 3.--5. "IIC3_PMUX,IIC3 pin configuration" "IIC3,GPIO,CAN1,LPUART1,FTM7,,EVT,?..."
newline
bitfld.long 0x00 0.--2. "IIC2_PMUX,IIC2 pin configuration" "IIC2,GPIO,FlexTimer,,,,SDHC1,?..."
line.long 0x04 "RCWSR13,Reset Configuration Word Status Register 13"
bitfld.long 0x04 12.--14. "UART2_SOUTSIN_PMUX,UART2 SOUT and SIN pin configuration" "UART2,GPIO,,LPUART6,FTM6,?..."
bitfld.long 0x04 6.--8. "UART1_SOUTSIN_PMUX,UART1 SOUT and SIN pin configuration" "UART1,GPIO,,LPUART6,FTM6,?..."
newline
bitfld.long 0x04 3.--5. "SDHC2_BASE_PMUX,SDHC2 base pin configuration" "SDHC2,GPIO,SPI2,GPIO2/LPUART5,GPIO2/FTM5,,XSPI1_B,?..."
bitfld.long 0x04 0.--2. "SDHC2_DAT74_PMUX,SDHC2_DAT[7:4] pin configuration" "SDHC2,GPIO,I2C7/I2C8,LPUART4,FTM4,,XSPI1_B,?..."
line.long 0x08 "RCWSR14,Reset Configuration Word Status Register 14"
bitfld.long 0x08 10. "IIC1_PMUX,IIC1 pin configuration" "IIC1,GPIO"
bitfld.long 0x08 9. "RESET_REQ_PMUX,RESET_REQ_B pin configuration" "RESET_REQ_B,GPIO"
newline
bitfld.long 0x08 6.--8. "ASLEEP_PMUX,ASLEEP pin configuration" "ASLEEP,GPIO,EVT,?..."
bitfld.long 0x08 3.--5. "CLK_OUT_PMUX,CLK_OUT pin configuration" "CLK_OUT,GPIO,FlexTimer,,,,EVT4_B,?..."
hgroup.long 0x138++0x03
hide.long 0x00 "RCWSR15,Reset Configuration Word Status Register 15"
rgroup.long 0x13C++0x03
line.long 0x00 "RCWSR16,Reset Configuration Word Status Register 16"
bitfld.long 0x00 6. "HOST_AGT_PEX2,Host/Agent PEX2" "Host,Agent"
bitfld.long 0x00 5. "HOST_AGT_PEX1,Host/Agent PEX1" "Host,Agent"
repeat 8. (increment 0x140 0x04)(increment 17. 1.)
hgroup.long $1++0x03
hide.long 0x00 "RCWSR$2,Reset Configuration Word Status Register $2"
repeat.end
rgroup.long 0x160++0x03
line.long 0x00 "RCWSR25,Reset Configuration Word Status Register 25"
hgroup.long 0x164++0x03
hide.long 0x00 "RCWSR26,Reset Configuration Word Status Register 26"
rgroup.long 0x168++0x03
line.long 0x00 "RCWSR27,Reset Configuration Word Status Register 27"
bitfld.long 0x00 28.--29. "GTX_CLK125_PMUX,125 MHz EC GTX CLK configuration" "EC1_GTX_CLK125,GPIO3_DAT[6],EC1_1722_DAT[0],?..."
bitfld.long 0x00 26.--27. "SPI3_PMUX,SPI3 reference clock select" "SPI3/CS,GPIO3_DAT[16:13],EC1_1588/EC1_1722,SWITCH_1588/EC1_1722"
newline
hexmask.long.word 0x00 18.--25. 1. "ENETC_RCW,ENETC RCW pin configuration"
bitfld.long 0x00 12.--17. "USB3_CLK_FSEL,USB3 clock frequency selection (FSEL)" ",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,100Mhz,?..."
newline
bitfld.long 0x00 10.--11. "USB_PWRFAULT_PMUX,USB_PWRFAULT configuration" "USB_PWRFAULT,GPIO3_DAT[17],SPI3_PCS[1],?..."
bitfld.long 0x00 8.--9. "USB_DRVVBUS_PMUX,USB_DRVVBUS configuration" "USB_DRVVBUS,GPIO3_DAT[18],SPI3_PCS[2],?..."
newline
bitfld.long 0x00 4.--6. "EC1_SAI3_6_PMUX,EC1 pin configuration" "ENETC_RGMII,GPIO3,SAI3_TX,SAI3_RX,FTM1,EC1/GPIO3,?..."
bitfld.long 0x00 1.--3. "EC1_SAI4_5_PMUX,EC1 pin configuration" "EC1,GPIO3,SAI5_TX,SAI5_RX,FTM1,EC1/GPIO3,?..."
hgroup.long 0x16C++0x03
hide.long 0x00 "RCWSR28,Reset Configuration Word Status Register 28"
rgroup.long 0x170++0x07
line.long 0x00 "RCWSR29,Reset Configuration Word Status Register 29"
bitfld.long 0x00 28.--31. "SRDS_PRTCL_S1_LN3,SerDes protocol select - SerDes 1 Lane 3" "Unused,,,,,,,SGMII 2.5G-S,,SGMII 1G-S,,PCIe1 x1,PCIe2 x2,PCIe1 x4,SATA,?..."
bitfld.long 0x00 24.--27. "SRDS_PRTCL_S1_LN2,SerDes protocol select - SerDes 1 Lane 2" "Unused,,,,,,,SGMII 2.5G-S,SGMII 1G-T,SGMII 1G-S,,PCIe2 x1,PCIe2 x2,PCIe1 x4,?..."
newline
bitfld.long 0x00 20.--23. "SRDS_PRTCL_S1_LN1,SerDes protocol select - SerDes 1 Lane 1" "Unused,,,10G QXGMII,,QSGMII,,SGMII 2.5G-S,SGMII 1G-T,SGMII 1G-S,,,PCIe1 x2,PCIe1 x4,?..."
bitfld.long 0x00 16.--19. "SRDS_PRTCL_S1_LN0,SerDes protocol select - SerDes 1 Lane 0" "Unused,10G QXGMII,,,,,SGMII 2.5G-T,SGMII 2.5G-S,SGMII 1G-T,SGMII 1G-S,,PCIe1 x1,PCIe1 x2,PCIe1 x4,?..."
newline
bitfld.long 0x00 1. "SRDS_PLL_PD_PLL2,SerDes PLL 2 power down" "Powered up,Powered down"
bitfld.long 0x00 0. "SRDS_PLL_PD_PLL1,SerDes PLL 1 power down" "Powered up,Powered down"
line.long 0x04 "RCWSR30,Reset Configuration Word Status Register 30"
bitfld.long 0x04 24.--25. "SRDS_S1_REFCLK_SRC_SEL,SERDES1 PLL1/2 reference clock source select" "SDA1_REG_CLK1_P/SDA1_REG_CLK2_P,DIFF_SYSCLK_B/SD1_REF_CLK2_P,,DIFF_SYSCLK_B"
bitfld.long 0x04 20.--21. "SRDS_DIV_PEX_S1,SerDes frequency divider - SerDes 1" "8G/5G,5G,2.5G,?..."
newline
bitfld.long 0x04 16.--17. "SRDS_PLL_REF_CLK_SEL_S1,SerDes PLL reference clock select - SerDes 1" "100MHz/125MHz/156.25MHz,125MHz/156.25MHz/Res,?..."
tree "Scratch Registers"
repeat 32. (increment 0x200 0x04)(increment 1 1)
group.long $1++0x03
line.long 0x00 "SCRATCHRW$2,Scratch Read/Write Register $2"
repeat.end
repeat 4. (increment 0x300 0x04)(increment 1 1)
group.long $1++0x03
line.long 0x00 "SCRATCHW1R$2,Scratch Read Register $2"
repeat.end
tree.end
newline
group.long 0x400++0x07
line.long 0x00 "BOOTLOCPTRL,Boot Location Pointer Low-Order Address Register"
line.long 0x04 "BOOTLOCPTRH,Boot Location Pointer High-Order Address Register"
repeat 2. (increment 0x520 0x04)(increment 1 1)
group.long $1++0x03
line.long 0x00 "USB$2_AMQR,USB $2 Access Management Qualifier Register"
bitfld.long 0x00 18. "PL,Privileged level bit" "Incorrect,Correct"
bitfld.long 0x00 17. "BMT,Bypass memory translation bit" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 16. "VA,Virtual address bit" "Physical,Virtual"
hexmask.long.byte 0x00 0.--6. 1. "ICID,Isolation context"
repeat.end
repeat 2. (increment 0x530 0x04)(increment 1 1)
group.long $1++0x03
line.long 0x00 "SDMM$2_AMQR,SD/MMC Access Management Qualifier Register $2"
bitfld.long 0x00 18. "PL,Privileged level bit" "Incorrect,Correct"
bitfld.long 0x00 17. "BMT,Bypass memory translation bit" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 16. "VA,Virtual address bit" "Physical,Virtual"
hexmask.long.byte 0x00 0.--6. 1. "ICID,Isolation context"
repeat.end
group.long 0x550++0x03
line.long 0x00 "SATA1_AMQR,SATA 1 Access Management Qualifier Register"
bitfld.long 0x00 18. "PL,Privileged level bit" "Incorrect,Correct"
bitfld.long 0x00 17. "BMT,Bypass memory translation bit" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 16. "VA,Virtual address bit" "Physical,Virtual"
hexmask.long.byte 0x00 0.--6. 1. "ICID,Isolation context"
group.long 0x570++0x03
line.long 0x00 "GPU_AMQR,GPU Access Management Qualifier Register"
bitfld.long 0x00 18. "PL,Privileged level bit" "Incorrect,Correct"
bitfld.long 0x00 17. "BMT,Bypass memory translation bit" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 16. "VA,Virtual address bit" "Physical,Virtual"
hexmask.long.byte 0x00 0.--6. 1. "ICID,Isolation context"
group.long 0x590++0x0B
line.long 0x00 "QDMA_AMQR,QDMA Access Management Qualifier Register"
bitfld.long 0x00 18. "PL,Privileged level bit" "Incorrect,Correct"
bitfld.long 0x00 17. "BMT,Bypass memory translation bit" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 16. "VA,Virtual address bit" "Physical,Virtual"
line.long 0x04 "DISPLAY_AMQR,DISPLAY Access Management Qualifier Register"
bitfld.long 0x04 18. "PL,Privileged level bit" "Incorrect,Correct"
bitfld.long 0x04 17. "BMT,Bypass memory translation bit" "Not bypassed,Bypassed"
newline
bitfld.long 0x04 16. "VA,Virtual address bit" "Physical,Virtual"
hexmask.long.byte 0x04 0.--6. 1. "ICID,Isolation context"
line.long 0x08 "EDMA_AMQR,eDMA Access Management Qualifier Register"
bitfld.long 0x08 18. "PL,Privileged level bit" "Incorrect,Correct"
bitfld.long 0x08 17. "BMT,Bypass memory translation bit" "Not bypassed,Bypassed"
newline
bitfld.long 0x08 16. "VA,Virtual address bit" "Physical,Virtual"
hexmask.long.byte 0x08 0.--6. 1. "ICID,Isolation context"
group.long 0x620++0x03
line.long 0x00 "GENCR1,General Control Register"
bitfld.long 0x00 31. "SYSBARDISABLE,A72 input configuration signal" "0,1"
bitfld.long 0x00 29. "BROADCASTCACHEMAINT,A72 input configuration signal" "0,1"
newline
autoindent.on right grid 10. 12.
repeat 6. (increment 0x624 0x04)(increment 2. 1.)
group.long $1++0x03
line.long 0x00 "GENCR$2,General Control Register"
bitfld.long 0x00 31. "GEN[31],Spare control bit 31" "0,1"
bitfld.long 0x00 30. "[30],Spare control bit 30" "0,1"
bitfld.long 0x00 29. "[29],Spare control bit 29" "0,1"
bitfld.long 0x00 28. "[28],Spare control bit 28" "0,1"
bitfld.long 0x00 27. "[27],Spare control bit 27" "0,1"
bitfld.long 0x00 26. "[26],Spare control bit 26" "0,1"
bitfld.long 0x00 25. "[25],Spare control bit 25" "0,1"
bitfld.long 0x00 24. "[24],Spare control bit 24" "0,1"
bitfld.long 0x00 23. "[23],Spare control bit 23" "0,1"
bitfld.long 0x00 22. "[22],Spare control bit 22" "0,1"
bitfld.long 0x00 21. "[21],Spare control bit 21" "0,1"
bitfld.long 0x00 20. "[20],Spare control bit 20" "0,1"
bitfld.long 0x00 19. "[19],Spare control bit 19" "0,1"
bitfld.long 0x00 18. "[18],Spare control bit 18" "0,1"
bitfld.long 0x00 17. "[17],Spare control bit 17" "0,1"
bitfld.long 0x00 16. "[16],Spare control bit 16" "0,1"
bitfld.long 0x00 15. "[15],Spare control bit 15" "0,1"
bitfld.long 0x00 14. "[14],Spare control bit 14" "0,1"
bitfld.long 0x00 13. "[13],Spare control bit 13" "0,1"
bitfld.long 0x00 12. "[12],Spare control bit 12" "0,1"
bitfld.long 0x00 11. "[11],Spare control bit 11" "0,1"
bitfld.long 0x00 10. "[10],Spare control bit 10" "0,1"
bitfld.long 0x00 9. "[9],Spare control bit 9" "0,1"
bitfld.long 0x00 8. "[8],Spare control bit 8" "0,1"
bitfld.long 0x00 7. "[7],Spare control bit 7" "0,1"
bitfld.long 0x00 6. "[6],Spare control bit 6" "0,1"
bitfld.long 0x00 5. "[5],Spare control bit 5" "0,1"
bitfld.long 0x00 4. "[4],Spare control bit 4" "0,1"
bitfld.long 0x00 3. "[3],Spare control bit 3" "0,1"
bitfld.long 0x00 2. "[2],Spare control bit 2" "0,1"
bitfld.long 0x00 1. "[1],Spare control bit 1" "0,1"
bitfld.long 0x00 0. "[0],Spare control bit 0" "0,1"
repeat.end
newline
autoindent.on center tree
repeat 4. (increment 0x740 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "TP_ITYP$2,Topology Initiator Type Register $2"
abitfld.long 0x00 0.--7. 1. "INIT_TYPE,Initiator type for this index" "0x00=Null initiator,0x80=Unavailable,0x81=Available"
repeat.end
rgroup.long 0x844++0x03
line.long 0x00 "TP_CLUSTER1L,Core Cluster 1 Topology Register"
bitfld.long 0x00 30.--31. "EOC,End of clusters" "Not last,Last,Last,Last"
bitfld.long 0x00 24.--29. "IT_IDX_PC4,Initiator type index for this cluster's fourth initiator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 16.--21. "IT_IDX_PC3,Initiator type index for this cluster third initiator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 8.--13. "IT_IDX_PC2,Initiator type index for this cluster second initiator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 0.--5. "IT_IDX_PC1,Initiator type index for this cluster first initiator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x900++0x03
line.long 0x00 "FLEXSPICR1,FlexSPI Control Register"
bitfld.long 0x00 0.--4. "FLEXSPI_CLK_DIV,FlexSPI clock divisor" "/1,/2,/3,/4,/5,/6,/7,/8,,,,/12,,,,/16,/20,/24,/28,/32,/80,?..."
repeat 4. (increment 0x920 0x04)(increment 1. 1.)
group.long $1++0x03
line.long 0x00 "IOQOSCR$2,I/O Quality of Services Register $2"
bitfld.long 0x00 0.--3. "QOS1,Slave interface base quality of service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x940++0x03
line.long 0x00 "UCCR,UART Connectivity Control Register"
bitfld.long 0x00 29. "EN2,Channel 2 UART enable" "Disabled,Enabled"
bitfld.long 0x00 28. "EN1,Channel 1 UART enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--7. "CH2_SEL,Channel 2 UART connectivity select" "UART1,UART2,?..."
bitfld.long 0x00 0.--3. "CH1_SEL,Channel 1 UART connectivity select" "UART1,UART2,?..."
group.long 0x960++0x03
line.long 0x00 "FTMCR,FlexTimer Control Register"
bitfld.long 0x00 6. "CASC08_07,Cascade flex timer 8 to flex timer 7" "Not cascaded,Cascaded"
bitfld.long 0x00 5. "CASC07_06,Cascade flex timer 7 to flex timer 6" "Not cascaded,Cascaded"
newline
bitfld.long 0x00 4. "CASC06_05,Cascade flex timer 6 to flex timer 5" "Not cascaded,Cascaded"
bitfld.long 0x00 3. "CASC05_04,Cascade flex timer 5 to flex timer 4" "Not cascaded,Cascaded"
newline
bitfld.long 0x00 2. "CASC04_03,Cascade flex timer 4 to flex timer 3" "Not cascaded,Cascaded"
bitfld.long 0x00 1. "CASC03_02,Cascade flex timer 3 to flex timer 2" "Not cascaded,Cascaded"
newline
bitfld.long 0x00 0. "CASC02_01,Cascade flex timer 2 to flex timer 1" "Not cascaded,Cascaded"
rgroup.long 0x990++0x03
line.long 0x00 "COREDISABLESR,Core Disable Status Register"
bitfld.long 0x00 1. "CD1,Core 1 disable" "No,Yes"
bitfld.long 0x00 0. "CD0,Core 0 disable" "No,Yes"
group.long 0xA00++0x03
line.long 0x00 "SDBGCR,Secure Debug Configuration Register"
bitfld.long 0x00 0. "SDBG_NS,Secure debug - TZ not secure" "Secure,Not secure"
rgroup.long 0xBF8++0x07
line.long 0x00 "IPBRR1,IP Block Revision Register 1"
hexmask.long.word 0x00 16.--31. 1. "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 1. "IP_MJ,Major revision"
newline
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "IPBRR2,IP Block Revision Register 2"
hexmask.long.byte 0x04 16.--23. 1. "IP_INT,IP block integration options"
hexmask.long.byte 0x04 0.--7. 1. "IP_CFG,IP block configuration options"
tree "PINCNTL"
base ad:0x01FF0000
group.long 0xE60++0x03
line.long 0x00 "DDRCLKDR,DDR Clock Disable Register"
bitfld.long 0x00 31. "D1_MCK0_DIS,DDR controller 1 clock 0 disable" "No,Yes"
bitfld.long 0x00 30. "D1_MCK1_DIS,DDR controller 1 clock 1 disable" "No,Yes"
newline
bitfld.long 0x00 29. "D1_MCK2_DIS,DDR controller 1 clock 2 disable" "No,Yes"
bitfld.long 0x00 28. "D1_MCK3_DIS,DDR controller 1 clock 3 disable" "No,Yes"
tree.end
tree "PINS_CONTROL_DFT"
base ad:0x01FF8000
group.long 0x14++0x03
line.long 0x00 "HYST_ANA_CNTRL1,Hyst Analog Control 1"
bitfld.long 0x00 17. "HYST_SDHC1_CLK,Hysteresis control for SDHC1_CLK" "CMOS input,Schmitt trigger input"
bitfld.long 0x00 16. "HYST_SDHC1_DAT3,Hysteresis control for SDHC1_DAT3" "CMOS input,Schmitt trigger input"
newline
bitfld.long 0x00 15. "HYST_SDHC1_DAT2,Hysteresis control for SDHC1_DAT2" "CMOS input,Schmitt trigger input"
bitfld.long 0x00 14. "HYST_SDHC1_DAT1,Hysteresis control for SDHC1_DAT1" "CMOS input,Schmitt trigger input"
newline
bitfld.long 0x00 13. "HYST_SDHC1_DAT0,Hysteresis control for SDHC1_DAT0" "CMOS input,Schmitt trigger input"
bitfld.long 0x00 12. "HYST_SDHC1_CMD,Hysteresis control for SDHC1_CMD" "CMOS input,Schmitt trigger input"
group.long 0x30++0x03
line.long 0x00 "VSEL_CNTRL1,VSEL Control 1"
bitfld.long 0x00 3.--4. "EVDD_VSEL,EVDD voltage select" "3.3V,,,1.8V"
bitfld.long 0x00 0. "AUTO_VOLT_CTRL,Auto-detect voltage control" "Auto,Manual"
tree.end
tree.end
tree "CCI-400 (Cache Coherent Interconnect)"
base ad:0x04090000
group.long 0x00++0x0B
line.long 0x00 "CONTROL_OVERRIDE,Control Override Register"
bitfld.long 0x00 5. "DISABLE_RETRY_REDUCTION_BUFFERS,Disable retry reduction buffers for speculative fetches" "No,Yes"
bitfld.long 0x00 4. "DISABLE_PRIORITY_PROMOTION,ARQOSARBS inputs are ignored" "No,Yes"
newline
bitfld.long 0x00 3. "TERMINATE_BARRIERS,Terminate Barriers" "BARRIERTERMINATE inputs,All interface terminate"
bitfld.long 0x00 2. "DISABLE_SPECULATIVE_FETCHES,Disable Speculative Fetches" "No,Yes"
newline
bitfld.long 0x00 1. "DVM_MESSAGE_DISABLE,DVM Message Disable" "No,Yes"
bitfld.long 0x00 0. "SNOOP_DISABLE,Snoop Disable" "No,Yes"
line.long 0x04 "SPECULATION_CONTROL,Speculation Control Register"
bitfld.long 0x04 20. "DISABLE_SPECULATIVE_FETCHES_S4,Disable speculative fetches from slave 4" "No,Yes"
bitfld.long 0x04 19. "DISABLE_SPECULATIVE_FETCHES_S3,Disable speculative fetches from slave 3" "No,Yes"
newline
bitfld.long 0x04 18. "DISABLE_SPECULATIVE_FETCHES_S2,Disable speculative fetches from slave 2" "No,Yes"
bitfld.long 0x04 17. "DISABLE_SPECULATIVE_FETCHES_S1,Disable speculative fetches from slave 1" "No,Yes"
newline
bitfld.long 0x04 16. "DISABLE_SPECULATIVE_FETCHES_S0,Disable speculative fetches from slave 0" "No,Yes"
bitfld.long 0x04 2. "DISABLE_SPECULATIVE_FETCHES_M2,Disable speculative fetches from master 2" "No,Yes"
newline
bitfld.long 0x04 1. "DISABLE_SPECULATIVE_FETCHES_M1,Disable speculative fetches from master 1" "No,Yes"
bitfld.long 0x04 0. "DISABLE_SPECULATIVE_FETCHES_M0,Disable speculative fetches from master 0" "No,Yes"
line.long 0x08 "SECURE_ACCESS,Secure Access Register"
bitfld.long 0x08 0. "SECURE_ACCESS_CONTROL,Secure Access Control" "Disabled,Enabled"
rgroup.long 0x0C++0x03
line.long 0x00 "STATUS,Status Register"
bitfld.long 0x00 0. "CCI_STATUS,CCI_Status" "Not pending,Pending"
group.long 0x10++0x03
line.long 0x00 "IMPRECISE_ERROR,Imprecise Error Register"
bitfld.long 0x00 20. "IMP_ERR_S4,Imprecise error indicator for slave interface S4" "No error,Error"
bitfld.long 0x00 19. "IMP_ERR_S3,Imprecise error indicator for slave interface S3" "No error,Error"
newline
bitfld.long 0x00 18. "IMP_ERR_S2,Imprecise error indicator for slave interface S2" "No error,Error"
bitfld.long 0x00 17. "IMP_ERR_S1,Imprecise error indicator for slave interface S1" "No error,Error"
newline
bitfld.long 0x00 16. "IMP_ERR_S0,Imprecise error indicator for slave interface S0" "No error,Error"
bitfld.long 0x00 2. "IMP_ERR_M2,Imprecise error indicator for master interface M2" "No error,Error"
newline
bitfld.long 0x00 1. "IMP_ERR_M1,Imprecise error indicator for master interface M1" "No error,Error"
bitfld.long 0x00 0. "IMP_ERR_M0,Imprecise error indicator for master interface M0" "No error,Error"
group.long 0x1000++0x07 "Slave 0"
line.long 0x00 "SNOOP_CONTROL_S0,Snoop Controls Register 0"
rbitfld.long 0x00 31. "SUPPORT_DVMS,Slave interface supports DVM messages" "Not supported,Supported"
rbitfld.long 0x00 30. "SUPPORT_SNOOPS,Slave interface supports snoops" "Not supported,Supported"
newline
bitfld.long 0x00 1. "ENABLE_DVMS,Enable DVMs" "Disabled,Enabled"
line.long 0x04 "SHAREABLE_OVERRIDE_S0,Shareable Overrides Register 0"
bitfld.long 0x04 0.--1. "AXDOMAIN_OVERRIDE,AxDOMAIN override" "Not overridden,Not overridden,Overridden to 0b00,Overridden to 0b01"
group.long (0x1000+0x100)++0x07
line.long 0x00 "READ_QOS_OVERRIDE_S0,Read Channel QoS Value Override Register 0"
rbitfld.long 0x00 8.--11. "ARQOS_OVERRIDE_READBACK,ARQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "ARQOS_VALUE,ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "WRITE_QOS_OVERRIDE_S0,Write QoS Override Register 0"
rbitfld.long 0x04 8.--11. "AWQOS_OVERRIDE_READBACK,AWQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "AWQOS_VALUE,AWQOS value for slave interface S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x1000+0x10C)++0x07
line.long 0x00 "QOS_CONTROL_S0,QoS Control Register 0"
rbitfld.long 0x00 31. "QOS_REGULATION_DISABLED,QoS regulation disabled" "No,Yes"
bitfld.long 0x00 21. "BANDWIDTH_REGULATION_MODE,Bandwidth regulation mode" "Normal,Quiesce high"
newline
bitfld.long 0x00 20. "ARQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for read transactions" "Latency,Period"
bitfld.long 0x00 16. "AWQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for write transaction" "Latency,Period"
newline
bitfld.long 0x00 3. "AR_OT_REGULATION,Enable regulation of outstanding read transactions for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 2. "AW_OT_REGULATION,Enable regulation of outstanding write transactions for slave interfaces" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "ARQOS_REGULATION_READ,Enable QoS value regulation on reads for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 0. "AWQOS_REGULATION_WRITE,Enable QoS value regulation on writes for slave interfaces" "Disabled,Enabled"
line.long 0x04 "MAX_OT_S0,Max OTs Register 0"
bitfld.long 0x04 24.--29. "INT_OT_AR,Integer part of the maximum outstanding AR addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 16.--23. 1. "FRAC_OT_AR,Fractional part of the maximum outstanding AR addresses S0"
newline
bitfld.long 0x04 8.--13. "INT_OT_AW,Integer part of the maximum outstanding AW addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 0.--7. 1. "FRAC_OT_AW,Fractional part of the maximum outstanding AW addresses S0"
group.long (0x1000+0x130)++0x03
line.long 0x00 "TARGET_LATENCY_S0,Regulator Targets Register 0"
hexmask.long.word 0x00 16.--27. 1. "AR_LAT,AR channel target latency"
hexmask.long.word 0x00 0.--11. 1. "AW_LAT,AW channel target latency"
group.long (0x1000+0x138)++0x03
line.long 0x00 "QOS_RANGE_S0,QoS Range Register 0"
bitfld.long 0x00 24.--27. "MAX_ARQOS,Maximum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "MIN_ARQOS,Minimum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--11. "MAX_AWQOS,Maximum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "MIN_AWQOS,Minimum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x1000+0x1268)++0x03
line.long 0x00 "LATENCY_REGULATION_S0,QoS Regulator Scale Factors Register 0"
bitfld.long 0x00 8.--10. "AR_SCALE_FACT,ARQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
bitfld.long 0x00 0.--2. "AW_SCALE_FACT,AWQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
group.long 0x2000++0x07 "Slave 1"
line.long 0x00 "SNOOP_CONTROL_S1,Snoop Controls Register 1"
rbitfld.long 0x00 31. "SUPPORT_DVMS,Slave interface supports DVM messages" "Not supported,Supported"
rbitfld.long 0x00 30. "SUPPORT_SNOOPS,Slave interface supports snoops" "Not supported,Supported"
newline
bitfld.long 0x00 1. "ENABLE_DVMS,Enable DVMs" "Disabled,Enabled"
line.long 0x04 "SHAREABLE_OVERRIDE_S1,Shareable Overrides Register 1"
bitfld.long 0x04 0.--1. "AXDOMAIN_OVERRIDE,AxDOMAIN override" "Not overridden,Not overridden,Overridden to 0b00,Overridden to 0b01"
group.long (0x2000+0x100)++0x07
line.long 0x00 "READ_QOS_OVERRIDE_S1,Read Channel QoS Value Override Register 1"
rbitfld.long 0x00 8.--11. "ARQOS_OVERRIDE_READBACK,ARQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "ARQOS_VALUE,ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "WRITE_QOS_OVERRIDE_S1,Write QoS Override Register 1"
rbitfld.long 0x04 8.--11. "AWQOS_OVERRIDE_READBACK,AWQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "AWQOS_VALUE,AWQOS value for slave interface S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x2000+0x10C)++0x07
line.long 0x00 "QOS_CONTROL_S1,QoS Control Register 1"
rbitfld.long 0x00 31. "QOS_REGULATION_DISABLED,QoS regulation disabled" "No,Yes"
bitfld.long 0x00 21. "BANDWIDTH_REGULATION_MODE,Bandwidth regulation mode" "Normal,Quiesce high"
newline
bitfld.long 0x00 20. "ARQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for read transactions" "Latency,Period"
bitfld.long 0x00 16. "AWQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for write transaction" "Latency,Period"
newline
bitfld.long 0x00 3. "AR_OT_REGULATION,Enable regulation of outstanding read transactions for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 2. "AW_OT_REGULATION,Enable regulation of outstanding write transactions for slave interfaces" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "ARQOS_REGULATION_READ,Enable QoS value regulation on reads for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 0. "AWQOS_REGULATION_WRITE,Enable QoS value regulation on writes for slave interfaces" "Disabled,Enabled"
line.long 0x04 "MAX_OT_S1,Max OTs Register 1"
bitfld.long 0x04 24.--29. "INT_OT_AR,Integer part of the maximum outstanding AR addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 16.--23. 1. "FRAC_OT_AR,Fractional part of the maximum outstanding AR addresses S0"
newline
bitfld.long 0x04 8.--13. "INT_OT_AW,Integer part of the maximum outstanding AW addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 0.--7. 1. "FRAC_OT_AW,Fractional part of the maximum outstanding AW addresses S0"
group.long (0x2000+0x130)++0x03
line.long 0x00 "TARGET_LATENCY_S1,Regulator Targets Register 1"
hexmask.long.word 0x00 16.--27. 1. "AR_LAT,AR channel target latency"
hexmask.long.word 0x00 0.--11. 1. "AW_LAT,AW channel target latency"
group.long (0x2000+0x138)++0x03
line.long 0x00 "QOS_RANGE_S1,QoS Range Register 1"
bitfld.long 0x00 24.--27. "MAX_ARQOS,Maximum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "MIN_ARQOS,Minimum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--11. "MAX_AWQOS,Maximum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "MIN_AWQOS,Minimum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x2000+0x1268)++0x03
line.long 0x00 "LATENCY_REGULATION_S1,QoS Regulator Scale Factors Register 1"
bitfld.long 0x00 8.--10. "AR_SCALE_FACT,ARQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
bitfld.long 0x00 0.--2. "AW_SCALE_FACT,AWQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
group.long 0x3000++0x07 "Slave 2"
line.long 0x00 "SNOOP_CONTROL_S2,Snoop Controls Register 2"
rbitfld.long 0x00 31. "SUPPORT_DVMS,Slave interface supports DVM messages" "Not supported,Supported"
rbitfld.long 0x00 30. "SUPPORT_SNOOPS,Slave interface supports snoops" "Not supported,Supported"
newline
bitfld.long 0x00 1. "ENABLE_DVMS,Enable DVMs" "Disabled,Enabled"
line.long 0x04 "SHAREABLE_OVERRIDE_S2,Shareable Overrides Register 2"
bitfld.long 0x04 0.--1. "AXDOMAIN_OVERRIDE,AxDOMAIN override" "Not overridden,Not overridden,Overridden to 0b00,Overridden to 0b01"
group.long (0x3000+0x100)++0x07
line.long 0x00 "READ_QOS_OVERRIDE_S2,Read Channel QoS Value Override Register 2"
rbitfld.long 0x00 8.--11. "ARQOS_OVERRIDE_READBACK,ARQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "ARQOS_VALUE,ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "WRITE_QOS_OVERRIDE_S2,Write QoS Override Register 2"
rbitfld.long 0x04 8.--11. "AWQOS_OVERRIDE_READBACK,AWQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "AWQOS_VALUE,AWQOS value for slave interface S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x3000+0x10C)++0x07
line.long 0x00 "QOS_CONTROL_S2,QoS Control Register 2"
rbitfld.long 0x00 31. "QOS_REGULATION_DISABLED,QoS regulation disabled" "No,Yes"
bitfld.long 0x00 21. "BANDWIDTH_REGULATION_MODE,Bandwidth regulation mode" "Normal,Quiesce high"
newline
bitfld.long 0x00 20. "ARQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for read transactions" "Latency,Period"
bitfld.long 0x00 16. "AWQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for write transaction" "Latency,Period"
newline
bitfld.long 0x00 3. "AR_OT_REGULATION,Enable regulation of outstanding read transactions for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 2. "AW_OT_REGULATION,Enable regulation of outstanding write transactions for slave interfaces" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "ARQOS_REGULATION_READ,Enable QoS value regulation on reads for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 0. "AWQOS_REGULATION_WRITE,Enable QoS value regulation on writes for slave interfaces" "Disabled,Enabled"
line.long 0x04 "MAX_OT_S2,Max OTs Register 2"
bitfld.long 0x04 24.--29. "INT_OT_AR,Integer part of the maximum outstanding AR addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 16.--23. 1. "FRAC_OT_AR,Fractional part of the maximum outstanding AR addresses S0"
newline
bitfld.long 0x04 8.--13. "INT_OT_AW,Integer part of the maximum outstanding AW addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 0.--7. 1. "FRAC_OT_AW,Fractional part of the maximum outstanding AW addresses S0"
group.long (0x3000+0x130)++0x03
line.long 0x00 "TARGET_LATENCY_S2,Regulator Targets Register 2"
hexmask.long.word 0x00 16.--27. 1. "AR_LAT,AR channel target latency"
hexmask.long.word 0x00 0.--11. 1. "AW_LAT,AW channel target latency"
group.long (0x3000+0x138)++0x03
line.long 0x00 "QOS_RANGE_S2,QoS Range Register 2"
bitfld.long 0x00 24.--27. "MAX_ARQOS,Maximum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "MIN_ARQOS,Minimum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--11. "MAX_AWQOS,Maximum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "MIN_AWQOS,Minimum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x3000+0x1268)++0x03
line.long 0x00 "LATENCY_REGULATION_S2,QoS Regulator Scale Factors Register 2"
bitfld.long 0x00 8.--10. "AR_SCALE_FACT,ARQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
bitfld.long 0x00 0.--2. "AW_SCALE_FACT,AWQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
group.long 0x4000++0x07 "Slave 3"
line.long 0x00 "SNOOP_CONTROL_S3,Snoop Controls Register 3"
rbitfld.long 0x00 31. "SUPPORT_DVMS,Slave interface supports DVM messages" "Not supported,Supported"
rbitfld.long 0x00 30. "SUPPORT_SNOOPS,Slave interface supports snoops" "Not supported,Supported"
newline
bitfld.long 0x00 1. "ENABLE_DVMS,Enable DVMs" "Disabled,Enabled"
line.long 0x04 "SHAREABLE_OVERRIDE_S3,Shareable Overrides Register 3"
bitfld.long 0x04 0.--1. "AXDOMAIN_OVERRIDE,AxDOMAIN override" "Not overridden,Not overridden,Overridden to 0b00,Overridden to 0b01"
group.long (0x4000+0x100)++0x07
line.long 0x00 "READ_QOS_OVERRIDE_S3,Read Channel QoS Value Override Register 3"
rbitfld.long 0x00 8.--11. "ARQOS_OVERRIDE_READBACK,ARQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "ARQOS_VALUE,ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "WRITE_QOS_OVERRIDE_S3,Write QoS Override Register 3"
rbitfld.long 0x04 8.--11. "AWQOS_OVERRIDE_READBACK,AWQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "AWQOS_VALUE,AWQOS value for slave interface S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x4000+0x10C)++0x07
line.long 0x00 "QOS_CONTROL_S3,QoS Control Register 3"
rbitfld.long 0x00 31. "QOS_REGULATION_DISABLED,QoS regulation disabled" "No,Yes"
bitfld.long 0x00 21. "BANDWIDTH_REGULATION_MODE,Bandwidth regulation mode" "Normal,Quiesce high"
newline
bitfld.long 0x00 20. "ARQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for read transactions" "Latency,Period"
bitfld.long 0x00 16. "AWQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for write transaction" "Latency,Period"
newline
bitfld.long 0x00 3. "AR_OT_REGULATION,Enable regulation of outstanding read transactions for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 2. "AW_OT_REGULATION,Enable regulation of outstanding write transactions for slave interfaces" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "ARQOS_REGULATION_READ,Enable QoS value regulation on reads for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 0. "AWQOS_REGULATION_WRITE,Enable QoS value regulation on writes for slave interfaces" "Disabled,Enabled"
line.long 0x04 "MAX_OT_S3,Max OTs Register 3"
bitfld.long 0x04 24.--29. "INT_OT_AR,Integer part of the maximum outstanding AR addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 16.--23. 1. "FRAC_OT_AR,Fractional part of the maximum outstanding AR addresses S0"
newline
bitfld.long 0x04 8.--13. "INT_OT_AW,Integer part of the maximum outstanding AW addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 0.--7. 1. "FRAC_OT_AW,Fractional part of the maximum outstanding AW addresses S0"
group.long (0x4000+0x130)++0x03
line.long 0x00 "TARGET_LATENCY_S3,Regulator Targets Register 3"
hexmask.long.word 0x00 16.--27. 1. "AR_LAT,AR channel target latency"
hexmask.long.word 0x00 0.--11. 1. "AW_LAT,AW channel target latency"
group.long (0x4000+0x138)++0x03
line.long 0x00 "QOS_RANGE_S3,QoS Range Register 3"
bitfld.long 0x00 24.--27. "MAX_ARQOS,Maximum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "MIN_ARQOS,Minimum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--11. "MAX_AWQOS,Maximum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "MIN_AWQOS,Minimum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x4000+0x1268)++0x03
line.long 0x00 "LATENCY_REGULATION_S3,QoS Regulator Scale Factors Register 3"
bitfld.long 0x00 8.--10. "AR_SCALE_FACT,ARQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
bitfld.long 0x00 0.--2. "AW_SCALE_FACT,AWQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
group.long 0x5000++0x07 "Slave 4"
line.long 0x00 "SNOOP_CONTROL_S4,Snoop Controls Register 4"
rbitfld.long 0x00 31. "SUPPORT_DVMS,Slave interface supports DVM messages" "Not supported,Supported"
rbitfld.long 0x00 30. "SUPPORT_SNOOPS,Slave interface supports snoops" "Not supported,Supported"
newline
bitfld.long 0x00 1. "ENABLE_DVMS,Enable DVMs" "Disabled,Enabled"
bitfld.long 0x00 0. "ENABLE_SNOOP,Enable issuing of snoop requests from this slave interface" "Disabled,Enabled"
line.long 0x04 "SHAREABLE_OVERRIDE_S4,Shareable Overrides Register 4"
bitfld.long 0x04 0.--1. "AXDOMAIN_OVERRIDE,AxDOMAIN override" "Not overridden,Not overridden,Overridden to 0b00,Overridden to 0b01"
group.long (0x5000+0x100)++0x07
line.long 0x00 "READ_QOS_OVERRIDE_S4,Read Channel QoS Value Override Register 4"
rbitfld.long 0x00 8.--11. "ARQOS_OVERRIDE_READBACK,ARQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "ARQOS_VALUE,ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "WRITE_QOS_OVERRIDE_S4,Write QoS Override Register 4"
rbitfld.long 0x04 8.--11. "AWQOS_OVERRIDE_READBACK,AWQOS override readback" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "AWQOS_VALUE,AWQOS value for slave interface S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x5000+0x10C)++0x07
line.long 0x00 "QOS_CONTROL_S4,QoS Control Register 4"
rbitfld.long 0x00 31. "QOS_REGULATION_DISABLED,QoS regulation disabled" "No,Yes"
bitfld.long 0x00 21. "BANDWIDTH_REGULATION_MODE,Bandwidth regulation mode" "Normal,Quiesce high"
newline
bitfld.long 0x00 20. "ARQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for read transactions" "Latency,Period"
bitfld.long 0x00 16. "AWQOS_REGULATION_MODE,Configures the mode of the QoS value regulator for write transaction" "Latency,Period"
newline
bitfld.long 0x00 3. "AR_OT_REGULATION,Enable regulation of outstanding read transactions for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 2. "AW_OT_REGULATION,Enable regulation of outstanding write transactions for slave interfaces" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "ARQOS_REGULATION_READ,Enable QoS value regulation on reads for slave interfaces" "Disabled,Enabled"
bitfld.long 0x00 0. "AWQOS_REGULATION_WRITE,Enable QoS value regulation on writes for slave interfaces" "Disabled,Enabled"
line.long 0x04 "MAX_OT_S4,Max OTs Register 4"
bitfld.long 0x04 24.--29. "INT_OT_AR,Integer part of the maximum outstanding AR addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 16.--23. 1. "FRAC_OT_AR,Fractional part of the maximum outstanding AR addresses S0"
newline
bitfld.long 0x04 8.--13. "INT_OT_AW,Integer part of the maximum outstanding AW addresses S0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
hexmask.long.byte 0x04 0.--7. 1. "FRAC_OT_AW,Fractional part of the maximum outstanding AW addresses S0"
group.long (0x5000+0x130)++0x03
line.long 0x00 "TARGET_LATENCY_S4,Regulator Targets Register 4"
hexmask.long.word 0x00 16.--27. 1. "AR_LAT,AR channel target latency"
hexmask.long.word 0x00 0.--11. 1. "AW_LAT,AW channel target latency"
group.long (0x5000+0x138)++0x03
line.long 0x00 "QOS_RANGE_S4,QoS Range Register 4"
bitfld.long 0x00 24.--27. "MAX_ARQOS,Maximum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "MIN_ARQOS,Minimum ARQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--11. "MAX_AWQOS,Maximum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "MIN_AWQOS,Minimum AWQOS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x5000+0x1268)++0x03
line.long 0x00 "LATENCY_REGULATION_S4,QoS Regulator Scale Factors Register 4"
bitfld.long 0x00 8.--10. "AR_SCALE_FACT,ARQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
bitfld.long 0x00 0.--2. "AW_SCALE_FACT,AWQOS Scale Factor" "1/32,1/64,1/128,1/256,1/512,1/1024,1/2048,1/4096"
tree.end
tree "DDR (DDR Memory Controller)"
base ad:0x01080000
repeat 4. (increment 0x00 0x08)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "CS$2_BNDS,Chip Select $2 Memory Bounds Register"
hexmask.long.word 0x00 16.--31. 0x01 "SA,Starting address for chip select (bank) $2"
hexmask.long.word 0x00 0.--15. 0x01 "EA,Ending address for chip select (bank) $2"
repeat.end
repeat 4. (increment 0x80 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "CS$2_CONFIG,Chip Select $2 Configuration Register"
bitfld.long 0x00 31. "CS_EN,Chip select $2 enable" "Disabled,Enabled"
bitfld.long 0x00 23. "AP_EN,Chip select $2 auto-precharge enable" "Disabled,Enabled"
bitfld.long 0x00 20.--22. "ODT_RD_CFG,ODT for reads configuration" "Never,On reads to CS$1,On reads to other chip selects,On reads to other DIMM,All reads,On transactions to same DIMM,On transactions to own CS/other DIMM,On transactions to other CS/same DIMM"
newline
bitfld.long 0x00 16.--18. "ODT_WR_CFG,ODT for writes configuration" "Never,On writes to CS$1,On writes to other chip selects,On writes to other DIMM,All writes,On transactions to same DIMM,On transactions to own CS/other DIMM,On transactions to other CS/same DIMM"
bitfld.long 0x00 14.--15. "BA_BITS_CS,Number of bank bits for SDRAM on chip select $1" "2 banks,3 banks,?..."
bitfld.long 0x00 8.--10. "ROW_BITS_CS,Number of row bits for SDRAM on chip select $1" "12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,?..."
newline
bitfld.long 0x00 4.--5. "BG_BITS_CS,Number of bank group bits for SDRAM on chip select $1" "0 banks,1 banks,2 banks,?..."
bitfld.long 0x00 0.--2. "COL_BITS_CS,Number of column bits for SDRAM on chip select $1" "8 bits,9 bits,10 bits,11 bits,?..."
repeat.end
group.long 0x100++0x0B
line.long 0x00 "TIMING_CFG_3,DDR SDRAM Timing Configuration 3 Register"
bitfld.long 0x00 28. "EXT_PRETOACT,Extended precharge-to-activate interval (t_RP)" "0 clocks,16 clocks"
bitfld.long 0x00 24.--25. "EXT_ACTTOPRE,Extended activate to precharge interval (t_RAS)" "0 clocks,16 clocks,32 clocks,48 clocks"
bitfld.long 0x00 22. "EXT_ACTTORW,Extended activate to read/write interval for SDRAM (t_RCD)" "0,1"
newline
bitfld.long 0x00 16.--21. "EXT_REFREC,Extended refresh recovery time (t_RFC)" "0 clocks,16 clocks,32 clocks,48 clocks,64 clocks,80 clocks,96 clocks,112 clocks,128 clocks,144 clocks,160 clocks,176 clocks,192 clocks,208 clocks,224 clocks,240 clocks,256 clocks,272 clocks,288 clocks,304 clocks,320 clocks,336 clocks,352 clocks,368 clocks,384 clocks,400 clocks,416 clocks,432 clocks,448 clocks,464 clocks,480 clocks,496 clocks,512 clocks,528 clocks,544 clocks,560 clocks,576 clocks,592 clocks,608 clocks,624 clocks,640 clocks,656 clocks,672 clocks,688 clocks,704 clocks,720 clocks,736 clocks,752 clocks,?..."
bitfld.long 0x00 12.--13. "EXT_CASLAT,Extended CAS latency" "0 clocks,8 clocks,16 clocks,?..."
bitfld.long 0x00 10. "EXT_ADD_LAT,Extended additive latency" "0 clocks,16 clocks"
newline
bitfld.long 0x00 8. "EXT_WRREC,Extended last data to precharge minimum interval (t_WR)" "0 clocks,16 clocks"
bitfld.long 0x00 0.--2. "CNTL_ADJ,Control adjust" "Aligned,1/4 cycle,1/2 cycle,3/4 cycle,1 cycle,5/4 cycle,?..."
line.long 0x04 "TIMING_CFG_0,DDR SDRAM Timing Configuration 0 Register"
bitfld.long 0x04 30.--31. "RWT,Read-to-write turnaround" "0 clocks,1 clock,2 clocks,3 clocks"
bitfld.long 0x04 28.--29. "WRT,Write-to-read turnaround" "0 clocks,1 clock,2 clocks,3 clocks"
bitfld.long 0x04 26.--27. "RRT,Read-to-read turnaround" "0 clocks,1 clock,2 clocks,3 clocks"
newline
bitfld.long 0x04 24.--25. "WWT,Write-to-write turnaround" "0 clocks,1 clock,2 clocks,3 clocks"
bitfld.long 0x04 20.--23. "ACT_PD_EXIT,Active powerdown exit timing (t_XP)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x04 16.--19. "PRE_PD_EXIT,Precharge powerdown exit timing (t_XP)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
newline
bitfld.long 0x04 14.--15. "EXT_PRE_PD_EXIT,Extended precharge powerdown exit timing (t_XP)" "0 clocks,16 clocks,32 clocks,48 clocks"
bitfld.long 0x04 0.--4. "MRS_CYC,Mode register set cycle time (t_MRD/t_MOD)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,20 clocks,21 clocks,22 clocks,23 clocks,24 clocks,25 clocks,26 clocks,27 clocks,28 clocks,29 clocks,30 clocks,31 clocks"
line.long 0x08 "TIMING_CFG_1,DDR SDRAM Timing Configuration 1 Register"
bitfld.long 0x08 28.--31. "PRETOACT,Precharge-to-activate interval (t_RP)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x08 24.--27. "ACTTOPRE,Activate to precharge interval (t_RAS)" "16 clocks,17 clocks,18 clocks,19 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x08 20.--23. "ACTTORW,Activate to read/write interval for SDRAM (t_RCD)" ",1 clocks,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
newline
bitfld.long 0x08 17.--19. "CASLAT,CAS latency" "1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks"
bitfld.long 0x08 12.--15. "REFREC,Refresh recovery time (t_RFC)" "8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,20 clocks,21 clocks,22 clocks,23 clocks"
bitfld.long 0x08 8.--11. "WRREC,Last data to precharge minimum interval (t_WR)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
newline
bitfld.long 0x08 4.--7. "ACTTOACT,Activate-to-activate interval (t_RRD)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x08 0.--3. "WRTORD,Last write data pair to read command issue interval (t_WTR)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
if (((per.l(ad:0x01080000+0x10C))&0x40000)==0x40000)
group.long 0x10C++0x03
line.long 0x00 "TIMING_CFG_2,DDR SDRAM Timing Configuration 2 Register"
bitfld.long 0x00 28.--31. "ADD_LAT,Additive latency" "0 clocks,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,?..."
bitfld.long 0x00 19.--22. "WR_LAT,Write latency" "0 clocks,1 clocks,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 18. "EXT_WR_LAT,Extended write latency" "0 clocks,16 clocks"
newline
bitfld.long 0x00 13.--16. "RD_TO_PRE,Read to precharge (t_RTP)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 9.--12. "WR_DATA_DELAY,Write command to write data strobe timing adjustment" "0 clock delay,2 clock delay,1/4 clock delay,9/4 clock delay,1/2 clock delay,5/2 clock delay,3/4 clock delay,,1 clock delay,,5/4 clock delay,,3/2 clock delay,,7/4 clock delay,?..."
bitfld.long 0x00 6.--8. "CKE_PLS,Minimum CKE pulse width (t_CKE)" "8 clocks,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks"
newline
bitfld.long 0x00 0.--5. "FOUR_ACT,Window for four activates (t_FAW)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,20 clocks,21 clocks,22 clocks,23 clocks,24 clocks,25 clocks,26 clocks,27 clocks,28 clocks,29 clocks,30 clocks,31 clocks,32 clocks,33 clocks,34 clocks,35 clocks,36 clocks,37 clocks,38 clocks,39 clocks,40 clocks,41 clocks,42 clocks,43 clocks,44 clocks,45 clocks,46 clocks,47 clocks,48 clocks,49 clocks,50 clocks,51 clocks,52 clocks,53 clocks,54 clocks,55 clocks,56 clocks,57 clocks,58 clocks,59 clocks,60 clocks,61 clocks,62 clocks,63 clocks"
else
group.long 0x10C++0x03
line.long 0x00 "TIMING_CFG_2,DDR SDRAM Timing Configuration 2 Register"
bitfld.long 0x00 28.--31. "ADD_LAT,Additive latency" "0 clocks,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,?..."
bitfld.long 0x00 19.--22. "WR_LAT,Write latency" ",,,,,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 18. "EXT_WR_LAT,Extended write latency" "0 clocks,16 clocks"
newline
bitfld.long 0x00 13.--16. "RD_TO_PRE,Read to precharge (t_RTP)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 9.--12. "WR_DATA_DELAY,Write command to write data strobe timing adjustment" "0 clock delay,2 clock delay,1/4 clock delay,9/4 clock delay,1/2 clock delay,5/2 clock delay,3/4 clock delay,,1 clock delay,,5/4 clock delay,,3/2 clock delay,,7/4 clock delay,?..."
bitfld.long 0x00 6.--8. "CKE_PLS,Minimum CKE pulse width (t_CKE)" "8 clocks,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks"
newline
bitfld.long 0x00 0.--5. "FOUR_ACT,Window for four activates (t_FAW)" ",1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,20 clocks,21 clocks,22 clocks,23 clocks,24 clocks,25 clocks,26 clocks,27 clocks,28 clocks,29 clocks,30 clocks,31 clocks,32 clocks,33 clocks,34 clocks,35 clocks,36 clocks,37 clocks,38 clocks,39 clocks,40 clocks,41 clocks,42 clocks,43 clocks,44 clocks,45 clocks,46 clocks,47 clocks,48 clocks,49 clocks,50 clocks,51 clocks,52 clocks,53 clocks,54 clocks,55 clocks,56 clocks,57 clocks,58 clocks,59 clocks,60 clocks,61 clocks,62 clocks,63 clocks"
endif
group.long 0x110++0x1B
line.long 0x00 "SDRAM_CFG,DDR SDRAM Control Configuration Register"
bitfld.long 0x00 31. "MEM_EN,DDR SDRAM interface logic enable" "Disabled,Enabled"
bitfld.long 0x00 30. "SREN,Self refresh enable (during sleep)" "Disabled,Enabled"
bitfld.long 0x00 29. "ECC_EN,ECC enable" "Disabled,Enabled"
newline
bitfld.long 0x00 24.--26. "SDRAM_TYPE,Type of SDRAM device to be used" ",,,,,DDR4,,DDR3"
bitfld.long 0x00 21. "DYN_PWR,Dynamic power management mode enable" "Disabled,Enabled"
bitfld.long 0x00 19.--20. "DBW,DRAM data bus width" ",32-bit,?..."
newline
bitfld.long 0x00 18. "BE_8,8-beat burst enable" "4-beat,8-beat"
bitfld.long 0x00 16. "T3_EN,Enable 3T timing" "Disabled,Enabled"
bitfld.long 0x00 15. "T2_EN,Enable 2T timing" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 8.--14. 1. "BA_INTLV_CTL,Bank (chip select) interleaving control"
bitfld.long 0x00 3. "HSE,Half-strength enable" "Full,Half"
bitfld.long 0x00 2. "ACC_ECC_EN,Accumulated ECC enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "MEM_HALT,DDR memory controller halt" "Not halted,Halted"
bitfld.long 0x00 0. "BI,Bypass initialization" "Not bypassed,Bypassed"
line.long 0x04 "SDRAM_CFG_2,DDR SDRAM Control Configuration 2 Register"
bitfld.long 0x04 31. "FRC_SR,Force self refresh" "Normal,Self-refresh"
bitfld.long 0x04 20.--22. "ODT_CFG,ODT configuration" "Never,,On DRAM reads,?..."
bitfld.long 0x04 12.--15. "NUM_PR,Number of posted refreshes" ",1,2,3,4,5,6,7,8,?..."
newline
bitfld.long 0x04 11. "DDR_SLOW,DDR slow frequency" "1250 MT/s or higher,Less than 1250 MT/s"
bitfld.long 0x04 9. "QD_EN,Quad-rank enable" "Disabled,Enabled"
bitfld.long 0x04 8. "UNQ_MRS_EN,Unique MRS enable" "Disabled,Enabled"
newline
bitfld.long 0x04 6. "OBC_CFG,On-the-fly burst chop configuration" "Disabled,Enabled"
bitfld.long 0x04 5. "AP_EN,Address parity enable" "Disabled,Enabled"
bitfld.long 0x04 4. "D_INIT,DRAM data initialization" "Disabled,Enabled"
newline
bitfld.long 0x04 1. "CD_DIS,Corrupted data disable" "No,Yes"
bitfld.long 0x04 0. "MD_EN,Mirrored DIMM enable" "Disabled,Enabled"
line.long 0x08 "SDRAM_MODE,DDR SDRAM Mode Configuration Register"
hexmask.long.word 0x08 16.--31. 1. "ESDMODE,Extended SDRAM mode"
hexmask.long.word 0x08 0.--15. 1. "SDMODE,SDRAM mode"
line.long 0x0C "SDRAM_MODE2,DDR SDRAM Mode Configuration 2 Register"
hexmask.long.word 0x0C 16.--31. 1. "ESDMODE2,Extended SDRAM mode 2"
hexmask.long.word 0x0C 0.--15. 1. "ESDMODE3,Extended SDRAM mode 3"
line.long 0x10 "SDRAM_MD_CNTL,DDR SDRAM Mode Control Register"
bitfld.long 0x10 31. "MD_EN,Mode enable" "Disabled,Enabled"
bitfld.long 0x10 28.--30. "CS_SEL,Select chip select" "0,1,2,3,0 and 1,2 and 3,?..."
bitfld.long 0x10 24.--27. "MD_SEL,Mode register select" "MR,EMR,EMR2,EMR3,?..."
newline
bitfld.long 0x10 23. "SET_REF,Set refresh" "No refresh,Refresh"
bitfld.long 0x10 22. "SET_PRE,Set precharge" "No precharge,Precharge"
bitfld.long 0x10 20.--21. "CKE_CNTL,Clock enable control" "Not forced,Forced to low value,Forced to high value,?..."
newline
hexmask.long.tbyte 0x10 0.--17. 1. "MD_VALUE,Mode register value"
line.long 0x14 "SDRAM_INTERVAL,DDR SDRAM Interval Configuration Register"
hexmask.long.word 0x14 16.--31. 1. "REFINT,Refresh interval"
hexmask.long.word 0x14 0.--13. 1. "BSTOPRE,Precharge interval"
line.long 0x18 "DATA_INIT,DDR SDRAM Data Initialization Register"
group.long 0x130++0x03
line.long 0x00 "SDRAM_CLK_CNTL,DDR SDRAM Clock Control Register"
bitfld.long 0x00 5.--9. "CLK_ADJUST,Clock adjust. Launch after address/command delay in cycles" "No delay,1/16,1/8,3/16,1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16,1,?..."
group.long 0x148++0x07
line.long 0x00 "INIT_ADDR,DDR Training Initialization Address Register"
line.long 0x04 "INIT_EXT_ADDRESS,DDR Training Initialization Extended Address Register"
bitfld.long 0x04 31. "UIA,Use initialization address" "Default,Initialization"
hexmask.long.byte 0x04 0.--7. 0x01 "INIT_EXT_ADDR,Initialization extended address"
group.long 0x160++0x13
line.long 0x00 "TIMING_CFG_4,DDR SDRAM Timing Configuration 4 Register"
bitfld.long 0x00 28.--31. "RWT,Read-to-write turnaround for same chip select" "Default,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 24.--27. "WRT,Write-to-read turnaround for same chip select" "Default,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 20.--23. "RRT,Read-to-read turnaround for same chip select" "BL/2 clocks,BL/2+1 clock,BL/2+2 clocks,BL/2+3 clocks,BL/2+4 clocks,BL/2+5 clocks,BL/2+6 clocks,BL/2+7 clocks,BL/2+8 clocks,BL/2+9 clocks,BL/2+10 clocks,BL/2+11 clocks,BL/2+12 clocks,BL/2+13 clocks,BL/2+14 clocks,BL/2+15 clocks"
newline
bitfld.long 0x00 16.--19. "WWT,Write-to-write turnaround for same chip select" "BL/2 clocks,BL/2+1 clock,BL/2+2 clocks,BL/2+3 clocks,BL/2+4 clocks,BL/2+5 clocks,BL/2+6 clocks,BL/2+7 clocks,BL/2+8 clocks,BL/2+9 clocks,BL/2+10 clocks,BL/2+11 clocks,BL/2+12 clocks,BL/2+13 clocks,BL/2+14 clocks,BL/2+15 clocks"
bitfld.long 0x00 14.--15. "EXT_RWT,Extended read-to-write turnaround (t_RTW)" "0 clocks,1 clocks,2 clocks,3 clocks"
bitfld.long 0x00 12. "EXT_WRT,Extended write-to-read turnaround" "0 clocks,4 clocks"
newline
bitfld.long 0x00 10. "EXT_RRT,Extended read-to-read turnaround" "0 clocks,4 clocks"
bitfld.long 0x00 8. "EXT_WWT,Extended write-to-write turnaround" "0 clocks,4 clocks"
bitfld.long 0x00 4. "EXT_REFINT,Refresh interval" "0 clocks,65536 clocks"
newline
bitfld.long 0x00 0.--1. "DLL_LOCK,DDR SDRAM DLL lock time" "200 clocks,512 clocks,1024 clocks,?..."
line.long 0x04 "TIMING_CFG_5,DDR SDRAM Timing Configuration 5 Register"
bitfld.long 0x04 24.--28. "RODT_ON,Read to ODT on" "CASLAT-WR_LAT,0 clocks,1 clock,2 clocks,,,,,,,,,11 clocks,?..."
bitfld.long 0x04 20.--22. "RODT_OFF,Read to ODT off" "4 clocks,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks"
bitfld.long 0x04 12.--16. "WODT_ON,Write to ODT on" "0 clocks,0 clocks,1 clock,2 clocks,,,5 clocks,?..."
newline
bitfld.long 0x04 8.--10. "WODT_OFF,Write to ODT off" "4 clocks,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks"
line.long 0x08 "TIMING_CFG_6,DDR SDRAM Timing Configuration 6 Register"
bitfld.long 0x08 24.--28. "HS_CASLAT,MCAS_B latency from READ command while DDR controller is operating at half frequency" "Full speed value,,,,,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,20 clocks,?..."
bitfld.long 0x08 19.--23. "HS_WRLAT,Write latency while DDR controller is operating at half frequency" "Full speed value,16 clocks,,17 clocks,,18 clocks,,,,,5 clocks,,6 clocks,,7 clocks,?..."
bitfld.long 0x08 12.--16. "HS_WRREC,Last data to precharge minimum interval (t_WR) while DDR controller is operating at half frequency" "Full speed value,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,20 clocks,21 clocks,22 clocks,23 clocks,24 clocks,25 clocks,26 clocks,27 clocks,28 clocks,29 clocks,30 clocks,31 clocks"
line.long 0x0C "TIMING_CFG_7,DDR SDRAM Timing Configuration 7 Register"
bitfld.long 0x0C 28.--29. "CKE_RST,CKE reset time (t_XPR)" "200 clocks,256 clocks,512 clocks,1024 clocks"
bitfld.long 0x0C 24.--27. "CKSRE,Valid clock after self refresh entry (t_CKSRE)" "15 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,32 clocks"
bitfld.long 0x0C 20.--23. "CKSRX,Valid clock after self refresh exit (t_CKSRX)" "15 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,27 clocks"
newline
bitfld.long 0x0C 16.--19. "PAR_LAT,Number of cycles to be used for the parity latency for DDR4 memories" "Disabled,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,?..."
bitfld.long 0x0C 4.--7. "CS_TO_CMD,Number of cycles from a chip select until the command is launched" "Disabled,1 clock,2 clocks,3 clocks,4 clock,5 clocks,6 clocks,7 clocks,8 clocks,?..."
line.long 0x10 "ZQ_CNTL,DDR ZQ Calibration Control Register"
bitfld.long 0x10 31. "ZQ_EN,ZQ calibration enable" "Disabled,Enabled"
bitfld.long 0x10 24.--27. "ZQINIT,POR ZQ calibration time (t_ZQinit)" ",,,,,,,128 clocks,256 clocks,512 clocks,1024 clocks,?..."
bitfld.long 0x10 16.--19. "ZQOPER,Normal operation full calibration time (t_ZQoper)" ",,,,,,,128 clocks,256 clocks,512 clocks,1024 clocks,?..."
newline
bitfld.long 0x10 8.--11. "ZQCS,Normal operation short calibration time (t_ZQCS)" "1 clock,2 clocks,4 clocks,8 clocks,16 clocks,32 clocks,64 clocks,128 clocks,256 clocks,512 clocks,?..."
bitfld.long 0x10 0.--3. "ZQCS_INT,ZQCS interval" "32,64,128,256,512,1024,2048,4096,8192,16384,32768,,,,,Disabled"
if (((per.l(ad:0x01080000+0x174))&0x80000000)==0x80000000)
group.long 0x174++0x03
line.long 0x00 "WRLVL_CNTL,DDR Write Leveling Control Register"
bitfld.long 0x00 31. "WRLVL_EN,Write leveling enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "WRLVL_DONE,Write leveling done" "Not completed,Completed"
bitfld.long 0x00 24.--26. "WRLVL_MRD,First DQS pulse rising edge after margining mode is programmed (t_WL_MRD)" "1 clock,2 clocks,4 clocks,8 clocks,16 clocks,32 clocks,64 clocks,128 clocks"
newline
bitfld.long 0x00 20.--22. "WRLVL_ODTEN,ODT delay after margining mode is programmed (t_WL_ODTEN)" "1 clock,2 clocks,4 clocks,8 clocks,16 clocks,32 clocks,64 clocks,128 clocks"
bitfld.long 0x00 16.--18. "WRLVL_DQSEN,DQS/DQS_B delay after margining mode is programmed (t_WL_DQSEN)" "1 clock,2 clocks,4 clocks,8 clocks,16 clocks,32 clocks,64 clocks,128 clocks"
bitfld.long 0x00 12.--15. "WRLVL_SMPL,Write leveling sample time" "32,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 8.--10. "WRLVL_WLR,Write leveling repetition time" "1,2,4,8,16,32,64,128"
bitfld.long 0x00 0.--4. "WRLVL_START,Write leveling start time (delay) for DQS[0]" "0,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
else
group.long 0x174++0x03
line.long 0x00 "WRLVL_CNTL,DDR Write Leveling Control Register"
bitfld.long 0x00 31. "WRLVL_EN,Write leveling enable" "Disabled,Enabled"
rbitfld.long 0x00 30. "WRLVL_DONE,Write leveling done" "Not completed,Completed"
bitfld.long 0x00 0.--4. "WRLVL_START,Write leveling start time (delay) for DQS[0]" "0,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
endif
group.long 0x17C++0x0B
line.long 0x00 "SR_CNTR,DDR Self Refresh Counter Register"
bitfld.long 0x00 16.--19. "SR_IT,Self refresh idle threshold number of DRAM cycles" "Disabled,2^10,2^12,2^14,2^16,2^18,2^20,2^22,2^24,2^26,2^28,2^30,?..."
line.long 0x04 "SDRAM_RCW_1,DDR Register Control Words 1"
bitfld.long 0x04 28.--31. "RCW0,Register control word 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 24.--27. "RCW1,Register control word 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 20.--23. "RCW2,Register control word 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x04 16.--19. "RCW3,Register control word 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 12.--15. "RCW4,Register control word 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "RCW5,Register control word 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x04 4.--7. "RCW6,Register control word 6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "RCW7,Register control word 7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x08 "SDRAM_RCW_2,DDR Register Control Words 2"
bitfld.long 0x08 28.--31. "RCW8,Register control word 8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 24.--27. "RCW9,Register control word 9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 20.--23. "RCW10,Register control word 10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x08 16.--19. "RCW11,Register control word 11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 12.--15. "RCW12,Register control word 12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 8.--11. "RCW13,Register control word 13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x08 4.--7. "RCW14,Register control word 14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 0.--3. "RCW15,Register control word 15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x190++0x07
line.long 0x00 "WRLVL_CNTL_2,DDR Write Leveling Control 2 Register"
bitfld.long 0x00 24.--28. "WRLVL_START_1,Write leveling start time for DQS[1]" "WRLVL_START,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
bitfld.long 0x00 16.--20. "WRLVL_START_2,Write leveling start time for DQS[2]" "WRLVL_START,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
bitfld.long 0x00 8.--12. "WRLVL_START_3,Write leveling start time for DQS[3]" "WRLVL_START,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
newline
bitfld.long 0x00 0.--4. "WRLVL_START_4,Write leveling start time for DQS[4]" "WRLVL_START,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
line.long 0x04 "WRLVL_CNTL_3,DDR Write Leveling Control 3 Register"
bitfld.long 0x04 24.--28. "WRLVL_START_5,Write leveling start time for DQS[5]" "WRLVL_START,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
bitfld.long 0x04 16.--20. "WRLVL_START_6,Write leveling start time for DQS[6]" "WRLVL_START,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
bitfld.long 0x04 8.--12. "WRLVL_START_7,Write leveling start time for DQS[7]" "WRLVL_START,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
newline
bitfld.long 0x04 0.--4. "WRLVL_START_8,Write leveling start time for DQS[8]" "WRLVL_START,1/8,1/4,3/8,1/2,5/8,3/4,7/8,1,9/8,5/4,11/8,3/2,13/8,7/4,15/8,2,17/8,9/4,19/8,5/2,21/8,16/4,23/8,3,25/8,13/4,27/8,7/2,29/8,15/4,31/8"
if (((per.l(ad:0x01080000+0x110))&0x7000000)==0x5000000)
group.long 0x1A0++0x0F
line.long 0x00 "SDRAM_RCW_3,DDR Register Control Words 3"
hexmask.long.byte 0x00 24.--31. 1. "RCW1X,Register control word 1X"
hexmask.long.byte 0x00 16.--23. 1. "RCW2X,Register control word 2X"
hexmask.long.byte 0x00 8.--15. 1. "RCW3X,Register control word 3X"
newline
hexmask.long.byte 0x00 0.--7. 1. "RCW4X,Register control word 4X"
line.long 0x04 "SDRAM_RCW_4,DDR Register Control Words 4"
hexmask.long.byte 0x04 24.--31. 1. "RCW5X,Register control word 5X"
hexmask.long.byte 0x04 16.--23. 1. "RCW6X,Register control word 6X"
hexmask.long.byte 0x04 8.--15. 1. "RCW7X,Register control word 7X"
newline
hexmask.long.byte 0x04 0.--7. 1. "RCW8X,Register control word 8X"
line.long 0x08 "SDRAM_RCW_5,DDR Register Control Words 5"
hexmask.long.byte 0x08 24.--31. 1. "RCW9X,Register control word 9X"
hexmask.long.byte 0x08 16.--23. 1. "RCW10X,Register control word 10X"
hexmask.long.byte 0x08 8.--15. 1. "RCW11X,Register control word 11X"
newline
hexmask.long.byte 0x08 0.--7. 1. "RCW12X,Register control word 12X"
line.long 0x0C "SDRAM_RCW_6,DDR Register Control Words 6"
hexmask.long.byte 0x0C 24.--31. 1. "RCW13X,Register control word 13X"
hexmask.long.byte 0x0C 16.--23. 1. "RCW14X,Register control word 14X"
hexmask.long.byte 0x0C 8.--15. 1. "RCW15X,Register control word 15X"
newline
hexmask.long.byte 0x0C 0.--7. 1. "SPARE_CNFG,Spare config bits"
else
hgroup.long 0x1A0++0x03
hide.long 0x00 "SDRAM_RCW_3,DDR Register Control Words 3"
hgroup.long 0x1A4++0x03
hide.long 0x00 "SDRAM_RCW_4,DDR Register Control Words 4"
hgroup.long 0x1A8++0x03
hide.long 0x00 "SDRAM_RCW_5,DDR Register Control Words 5"
hgroup.long 0x1AC++0x03
hide.long 0x00 "SDRAM_RCW_6,DDR Register Control Words 6"
endif
group.long 0x200++0x17
line.long 0x00 "SDRAM_MODE_3,DDR SDRAM Mode Configuration 3 Register"
hexmask.long.word 0x00 16.--31. 1. "ESDMODE,Extended SDRAM mode"
hexmask.long.word 0x00 0.--15. 1. "SDMODE,SDRAM mode"
line.long 0x04 "SDRAM_MODE_4,DDR SDRAM Mode Configuration 4 Register"
hexmask.long.word 0x04 16.--31. 1. "ESDMODE2,Extended SDRAM mode 2"
hexmask.long.word 0x04 0.--15. 1. "ESDMODE3,Extended SDRAM mode 3"
line.long 0x08 "SDRAM_MODE_5,DDR SDRAM Mode Configuration 5 Register"
hexmask.long.word 0x08 16.--31. 1. "ESDMODE,Extended SDRAM mode"
hexmask.long.word 0x08 0.--15. 1. "SDMODE,SDRAM mode"
line.long 0x0C "SDRAM_MODE_6,DDR SDRAM Mode Configuration 6 Register"
hexmask.long.word 0x0C 16.--31. 1. "ESDMODE2,Extended SDRAM mode 2"
hexmask.long.word 0x0C 0.--15. 1. "ESDMODE3,Extended SDRAM mode 3"
line.long 0x10 "SDRAM_MODE_7,DDR SDRAM Mode Configuration 7 Register"
hexmask.long.word 0x10 16.--31. 1. "ESDMODE,Extended SDRAM mode"
hexmask.long.word 0x10 0.--15. 1. "SDMODE,SDRAM mode"
line.long 0x14 "SDRAM_MODE_8,DDR SDRAM Mode Configuration 8 Register"
hexmask.long.word 0x14 16.--31. 1. "ESDMODE2,Extended SDRAM mode 2"
hexmask.long.word 0x14 0.--15. 1. "ESDMODE3,Extended SDRAM mode 3"
group.long 0x220++0x1F
line.long 0x00 "SDRAM_MODE_9,DDR SDRAM Mode Configuration 9 Register"
hexmask.long.word 0x00 16.--31. 1. "ESDMODE4,Extended SDRAM mode 4"
hexmask.long.word 0x00 0.--15. 1. "ESDMODE5,Extended SDRAM mode 5"
line.long 0x04 "SDRAM_MODE_10,DDR SDRAM Mode Configuration 10 Register"
hexmask.long.word 0x04 16.--31. 1. "ESDMODE6,Extended SDRAM mode 6"
hexmask.long.word 0x04 0.--15. 1. "ESDMODE7,Extended SDRAM mode 7"
line.long 0x08 "SDRAM_MODE_11,DDR SDRAM Mode Configuration 11 Register"
hexmask.long.word 0x08 16.--31. 1. "ESDMODE4,Extended SDRAM mode 4"
hexmask.long.word 0x08 0.--15. 1. "ESDMODE5,Extended SDRAM mode 5"
line.long 0x0C "SDRAM_MODE_12,DDR SDRAM Mode Configuration 12 Register"
hexmask.long.word 0x0C 16.--31. 1. "ESDMODE6,Extended SDRAM mode 6"
hexmask.long.word 0x0C 0.--15. 1. "ESDMODE7,Extended SDRAM mode 7"
line.long 0x10 "SDRAM_MODE_13,DDR SDRAM Mode Configuration 13 Register"
hexmask.long.word 0x10 16.--31. 1. "ESDMODE4,Extended SDRAM mode 4"
hexmask.long.word 0x10 0.--15. 1. "ESDMODE5,Extended SDRAM mode 5"
line.long 0x14 "SDRAM_MODE_14,DDR SDRAM Mode Configuration 14 Register"
hexmask.long.word 0x14 16.--31. 1. "ESDMODE6,Extended SDRAM mode 6"
hexmask.long.word 0x14 0.--15. 1. "ESDMODE7,Extended SDRAM mode 7"
line.long 0x18 "SDRAM_MODE_15,DDR SDRAM Mode Configuration 15 Register"
hexmask.long.word 0x18 16.--31. 1. "ESDMODE4,Extended SDRAM mode 4"
hexmask.long.word 0x18 0.--15. 1. "ESDMODE5,Extended SDRAM mode 5"
line.long 0x1C "SDRAM_MODE_16,DDR SDRAM Mode Configuration 16 Register"
hexmask.long.word 0x1C 16.--31. 1. "ESDMODE6,Extended SDRAM mode 6"
hexmask.long.word 0x1C 0.--15. 1. "ESDMODE7,Extended SDRAM mode 7"
if (((per.l(ad:0x01080000+0x110))&0xE0)==0xA0)
group.long 0x250++0x03
line.long 0x00 "TIMING_CFG_8,DDR SDRAM Timing Configuration 8 Register"
bitfld.long 0x00 28.--31. "RWT_BG,Read-to-write turnaround for same chip select and same bank group" "Default,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 24.--27. "WRT_BG,Write-to-read turnaround for same chip select and same bank group" "Default,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 20.--23. "RRT_BG,Read-to-read turnaround for same chip select and same bank group" "BL/2 clocks,BL/2+1 clock,BL/2+2 clocks,BL/2+3 clocks,BL/2+4 clocks,BL/2+5 clocks,BL/2+6 clocks,BL/2+7 clocks,BL/2+8 clocks,BL/2+9 clocks,BL/2+10 clocks,BL/2+11 clocks,BL/2+12 clocks,BL/2+13 clocks,BL/2+14 clocks,BL/2+15 clocks"
newline
bitfld.long 0x00 16.--19. "WWT_BG,Write-to-write turnaround for same chip select and same bank group" "BL/2 clocks,BL/2+1 clock,BL/2+2 clocks,BL/2+3 clocks,BL/2+4 clocks,BL/2+5 clocks,BL/2+6 clocks,BL/2+7 clocks,BL/2+8 clocks,BL/2+9 clocks,BL/2+10 clocks,BL/2+11 clocks,BL/2+12 clocks,BL/2+13 clocks,BL/2+14 clocks,BL/2+15 clocks"
bitfld.long 0x00 12.--15. "ACTTOACT_BG,Activate-to-activate interval for the same bank group(t_RRD_L)" "Disabled,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 8.--11. "WRTORD_BG,Last write data pair to read command issue interval for the same bank group(t_WTR_L)" "Disabled,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
newline
bitfld.long 0x00 0.--4. "PRE_ALL_REC,Precharge all-to-activate interval" "TIMING_CFG_1,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,20 clocks,21 clocks,22 clocks,23 clocks,24 clocks,25 clocks,26 clocks,27 clocks,28 clocks,29 clocks,30 clocks,31 clocks"
else
group.long 0x250++0x03
line.long 0x00 "TIMING_CFG_8,DDR SDRAM Timing Configuration 8 Register"
bitfld.long 0x00 28.--31. "RWT_BG,Read-to-write turnaround for same chip select and same bank group" "Default,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 24.--27. "WRT_BG,Write-to-read turnaround for same chip select and same bank group" "Default,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks"
bitfld.long 0x00 20.--23. "RRT_BG,Read-to-read turnaround for same chip select and same bank group" "BL/2 clocks,BL/2+1 clock,BL/2+2 clocks,BL/2+3 clocks,BL/2+4 clocks,BL/2+5 clocks,BL/2+6 clocks,BL/2+7 clocks,BL/2+8 clocks,BL/2+9 clocks,BL/2+10 clocks,BL/2+11 clocks,BL/2+12 clocks,BL/2+13 clocks,BL/2+14 clocks,BL/2+15 clocks"
newline
bitfld.long 0x00 16.--19. "WWT_BG,Write-to-write turnaround for same chip select and same bank group" "BL/2 clocks,BL/2+1 clock,BL/2+2 clocks,BL/2+3 clocks,BL/2+4 clocks,BL/2+5 clocks,BL/2+6 clocks,BL/2+7 clocks,BL/2+8 clocks,BL/2+9 clocks,BL/2+10 clocks,BL/2+11 clocks,BL/2+12 clocks,BL/2+13 clocks,BL/2+14 clocks,BL/2+15 clocks"
bitfld.long 0x00 12.--15. "ACTTOACT_BG,Activate-to-activate interval for the same bank group(t_RRD_L)" "Disabled,?..."
bitfld.long 0x00 8.--11. "WRTORD_BG,Last write data pair to read command issue interval for the same bank group(t_WTR_L)" "Disabled,?..."
newline
bitfld.long 0x00 0.--4. "PRE_ALL_REC,Precharge all-to-activate interval" "TIMING_CFG_1,1 clock,2 clocks,3 clocks,4 clocks,5 clocks,6 clocks,7 clocks,8 clocks,9 clocks,10 clocks,11 clocks,12 clocks,13 clocks,14 clocks,15 clocks,16 clocks,17 clocks,18 clocks,19 clocks,20 clocks,21 clocks,22 clocks,23 clocks,24 clocks,25 clocks,26 clocks,27 clocks,28 clocks,29 clocks,30 clocks,31 clocks"
endif
group.long 0x260++0x03
line.long 0x00 "SDRAM_CFG_3,DDR SDRAM Control Configuration 3 Register"
bitfld.long 0x00 31. "DDRC_RST,DDR controller reset" "No reset,Reset"
bitfld.long 0x00 30. "ECC_FIX_EN,ECC fixing enable" "Disabled,Enabled"
bitfld.long 0x00 24.--27. "ECC_SCRUB_INT,ECC scrubbing interval" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384"
newline
bitfld.long 0x00 12.--13. "DM_CFG,Data mask config" "Normal data masks,,Data bus inversion,Not used"
bitfld.long 0x00 8.--9. "REF_MODE,Refresh mode" "Disabled,2x,4x,?..."
bitfld.long 0x00 0. "DIS_MRS_PAR,Disable MRS on parity error" "No,Yes"
group.long 0x400++0x0F
line.long 0x00 "DQ_MAP0,DQ Mapping Register 0"
bitfld.long 0x00 26.--31. "DQ[0:3],DQ[0:3] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x00 20.--25. "DQ[4:7],DQ[4:7] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x00 14.--19. "DQ[8:11],DQ[8:11] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
newline
bitfld.long 0x00 8.--13. "DQ[12:15],DQ[12:15] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x00 2.--7. "DQ[16:19},DQ[16:19] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
line.long 0x04 "DQ_MAP1,DQ Mapping Register 1"
bitfld.long 0x04 26.--31. "DQ[20:23],DQ[20:23] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x04 20.--25. "DQ[24:27],DQ[24:27] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x04 14.--19. "DQ[28:31],DQ[28:31] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
newline
bitfld.long 0x04 8.--13. "DQ[32:35],DQ[32:35] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x04 2.--7. "DQ[36:39],DQ[36:39] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
line.long 0x08 "DQ_MAP2,DQ Mapping Register 2"
bitfld.long 0x08 26.--31. "DQ[40:43],DQ[40:43] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x08 20.--25. "DQ[44:47],DQ[44:47] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x08 14.--19. "DQ[48:51],DQ[48:51] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
newline
bitfld.long 0x08 8.--13. "DQ[52:55],DQ[52:55] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x08 2.--7. "DQ[56:59],DQ[56:59] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
line.long 0x0C "DQ_MAP3,DQ Mapping Register 3"
bitfld.long 0x0C 0. "ORS,Odd rank swizzle" "Disabled,Enabled"
bitfld.long 0x0C 14.--19. "ECC[4:7],ECC[4:7] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
bitfld.long 0x0C 20.--25. "ECC[0:3],ECC[0:3] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
newline
bitfld.long 0x0C 26.--31. "DQ[60:63},DQ[60:63] mapping" "0-1-2-3,0-1-2-3,0-1-3-2,0-2-1-3,0-2-3-1,0-3-1-2,0-3-2-1,1-0-2-3,1-0-3-2,1-2-0-3,1-2-3-0,1-3-0-2,1-3-2-0,2-0-1-3,2-0-3-1,2-1-0-3,2-1-3-0,2-3-0-1,2-3-1-0,3-0-1-2,3-0-2-1,3-1-0-2,3-1-2-0,3-2-0-1,3-2-1-0,,,,,,,,,4-5-6-7,4-5-7-6,4-6-5-7,4-6-7-5,4-7-5-6,4-7-6-5,5-4-6-7,5-4-7-6,5-6-4-7,5-6-7-4,5-7-4-6,5-7-6-4,6-4-5-7,6-4-7-5,6-5-4-7,6-5-7-4,6-7-4-5,6-7-5-4,7-4-5-6,7-4-6-5,7-5-4-6,7-5-6-4,7-6-4-5,7-6-5-4,?..."
rgroup.long 0xB20++0x03
line.long 0x00 "DDRDSR_1,DDR Debug Status Register 1"
bitfld.long 0x00 15. "CZ,Current setting of driver command impedance" "High,Low"
bitfld.long 0x00 7. "DZ,Current setting of driver data impedance" "High,Low"
group.long 0xB24++0x0B
line.long 0x00 "DDRDSR_2,DDR Debug Status Register 2"
bitfld.long 0x00 31. "CLKZ,Current setting of driver clock impedance" "High,Low"
eventfld.long 0x00 1. "RPD_ST,Rapid clear of memory start" "Not started,Started"
eventfld.long 0x00 0. "RPD_END,Rapid clear of memory end" "Not completed,Completed"
line.long 0x04 "DDRCDR_1,DDR Control Driver Register 1"
bitfld.long 0x04 31. "DHC_EN,DDR driver hardware compensation enable" "Disabled,Enabled"
bitfld.long 0x04 18.--19. "ODT,ODT termination value for IOs" "0,1,2,3"
bitfld.long 0x04 17. "DSO_C_EN,Driver software override enable for address/command" "Disabled,Enabled"
newline
bitfld.long 0x04 16. "DSO_D_EN,Driver software override enable for data" "Disabled,Enabled"
bitfld.long 0x04 15. "DSO_CZ,DDR driver software command impedance override" "Highest,Lowest"
bitfld.long 0x04 7. "DSO_DZ,Driver software data impedance override" "Highest,Lowest"
line.long 0x08 "DDRCDR_2,DDR Control Driver Register 2"
bitfld.long 0x08 31. "DSO_CLK_EN,Driver software override enable for clocks" "Disabled,Enabled"
bitfld.long 0x08 27. "DSO_CLKZ,Driver software clocks impedance override" "Highest,Lowest"
bitfld.long 0x08 15. "VREF_OVRD_EN,Internal VRef generation override enable" "Disabled,Enabled"
newline
bitfld.long 0x08 8.--13. "VREF_OVRD_VAL,Defines the override value to use for the internal VRef if VREF_OVRD_EN is set" "37%,38%,39%,40%,41%,42%,43%,44%,45%,46%,47%,48%,49%,50%,51%,52%,53%,54%,55%,56%,57%,58%,59%,60%,61%,62%,63%,64%,65%,66%,67%,68%,69%,70%,71%,72%,73%,74%,75%,76%,77%,78%,79%,80%,81%,82%,83%,84%,85%,86%,87%,88%,89%,90%,91%,92%,93%,94%,95%,96%,97%,98%,99%,100%"
bitfld.long 0x08 7. "VREF_TRAIN_EN,Enable DRAM VRef training" "Disabled,Enabled"
bitfld.long 0x08 6. "VREF_DRAM_RANGE,The VRef range during DRAM training" "Range1,Range2"
newline
bitfld.long 0x08 0. "ODT,ODT termination value for IOs" "0,1"
rgroup.long 0xBF8++0x07
line.long 0x00 "IP_REV1,DDR IP Block Revision 1 Register"
hexmask.long.word 0x00 16.--31. 1. "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 1. "IP_MJ,Major revision"
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "IP_REV2,DDR IP Block Revision 2 Register"
hexmask.long.byte 0x04 16.--23. 1. "IP_INT,IP block integration options"
hexmask.long.byte 0x04 0.--7. 1. "IP_CFG,IP block configuration options"
if (((per.l(ad:0x01080000+0xD00))&0x3000000)==0x00)
group.long 0xD00++0x03
line.long 0x00 "MTCR,DDR Memory Test Control Register"
bitfld.long 0x00 31. "MT_EN,Memory test enable" "Disabled,Enabled"
bitfld.long 0x00 24.--25. "MT_TYP,Memory test type" "Writes and reads,Writes only,Reads only,?..."
bitfld.long 0x00 16.--19. "MT_TRNARND,Memory test turnaround" "Entire mem write then read,1 transaction each,2 transaction each,4 transaction each,?..."
newline
bitfld.long 0x00 9. "MT_ADDR_EN,Memory test address range enable" "Disabled,Enabled"
bitfld.long 0x00 0. "MT_STAT,Memory test status" "No fail,Fail"
else
group.long 0xD00++0x03
line.long 0x00 "MTCR,DDR Memory Test Control Register"
bitfld.long 0x00 31. "MT_EN,Memory test enable" "Disabled,Enabled"
bitfld.long 0x00 24.--25. "MT_TYP,Memory test type" "Writes and reads,Writes only,Reads only,?..."
bitfld.long 0x00 9. "MT_ADDR_EN,Memory test address range enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "MT_STAT,Memory test status" "No fail,Fail"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD20++0x03
line.long 0x00 "MTP0,DDR Memory Test Pattern 0 Register"
else
hgroup.long 0xD20++0x03
hide.long 0x00 "MTP0,DDR Memory Test Pattern 0 Register"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD24++0x03
line.long 0x00 "MTP1,DDR Memory Test Pattern 1 Register"
else
hgroup.long 0xD24++0x03
hide.long 0x00 "MTP1,DDR Memory Test Pattern 1 Register"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD28++0x03
line.long 0x00 "MTP2,DDR Memory Test Pattern 2 Register"
else
hgroup.long 0xD28++0x03
hide.long 0x00 "MTP2,DDR Memory Test Pattern 2 Register"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD2C++0x03
line.long 0x00 "MTP3,DDR Memory Test Pattern 3 Register"
else
hgroup.long 0xD2C++0x03
hide.long 0x00 "MTP3,DDR Memory Test Pattern 3 Register"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD30++0x03
line.long 0x00 "MTP4,DDR Memory Test Pattern 4 Register"
else
hgroup.long 0xD30++0x03
hide.long 0x00 "MTP4,DDR Memory Test Pattern 4 Register"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD34++0x03
line.long 0x00 "MTP5,DDR Memory Test Pattern 5 Register"
else
hgroup.long 0xD34++0x03
hide.long 0x00 "MTP5,DDR Memory Test Pattern 5 Register"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD38++0x03
line.long 0x00 "MTP6,DDR Memory Test Pattern 6 Register"
else
hgroup.long 0xD38++0x03
hide.long 0x00 "MTP6,DDR Memory Test Pattern 6 Register"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD3C++0x03
line.long 0x00 "MTP7,DDR Memory Test Pattern 7 Register"
else
hgroup.long 0xD3C++0x03
hide.long 0x00 "MTP7,DDR Memory Test Pattern 7 Register"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD40++0x03
line.long 0x00 "MTP8,DDR Memory Test Pattern 8 Register"
else
hgroup.long 0xD40++0x03
hide.long 0x00 "MTP8,DDR Memory Test Pattern 8 Register"
endif
if (((per.l(ad:0x01080000+0xD00))&0x80000000)==0x80000000)
group.long 0xD44++0x03
line.long 0x00 "MTP9,DDR Memory Test Pattern 9 Register"
else
hgroup.long 0xD44++0x03
hide.long 0x00 "MTP9,DDR Memory Test Pattern 9 Register"
endif
group.long 0xD60++0x0F
line.long 0x00 "MT_ST_EXT_ADDR,DDR Memory Test Start Extended Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "MT_ST_EXT_ADDR,This field represents the starting extended address"
line.long 0x04 "MT_ST_ADDR,DDR Memory Test Start Address"
line.long 0x08 "MT_END_EXT_ADDR,DDR Memory Test End Extended Address Register"
hexmask.long.byte 0x08 0.--7. 0x01 "MT_END_EXT_ADDR,This field represents the ending extended address"
line.long 0x0C "MT_END_ADDR,DDR Memory Test End Address"
group.long 0xE00++0x07
line.long 0x00 "DATA_ERR_INJECT_HI,Memory Data Path Error Injection Mask High Register"
line.long 0x04 "DATA_ERR_INJECT_LO,Memory Data Path Error Injection Mask Low Register"
group.long 0xE08++0x03
line.long 0x00 "ECC_ERR_INJECT,Memory Data Path Error Injection Mask ECC Register"
bitfld.long 0x00 16. "APIEN,Address parity error injection enable" "Disabled,Enabled"
bitfld.long 0x00 9. "EMB,ECC mirror byte enable" "Disabled,Enabled"
bitfld.long 0x00 8. "EIEN,Error injection enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--7. 1. "EEIM,ECC error injection mask"
group.long 0xE20++0x0B
line.long 0x00 "CAPTURE_DATA_HI,Memory Data Path Read Capture High Register"
line.long 0x04 "CAPTURE_DATA_LO,Memory Data Path Read Capture Low Register"
line.long 0x08 "CAPTURE_ECC,Memory Data Path Read Capture ECC Register"
group.long 0xE40++0x1B
line.long 0x00 "ERR_DETECT,Memory Error Detect Register"
eventfld.long 0x00 31. "MME,Multiple memory errors" "No error,Error"
eventfld.long 0x00 12. "SSBE,Scrubbed single-bit ECC error" "No error,Error"
eventfld.long 0x00 8. "APE,Address parity error" "No error,Error"
newline
eventfld.long 0x00 7. "ACE,Automatic calibration error" "No error,Error"
eventfld.long 0x00 4. "CDE,Corrupted data error" "No error,Error"
eventfld.long 0x00 3. "MBE,Multiple-bit error" "No error,Error"
newline
eventfld.long 0x00 2. "SBE,Single-bit ECC error" "No error,Error"
eventfld.long 0x00 0. "MSE,Memory select error" "No error,Error"
line.long 0x04 "ERR_DISABLE,Memory Error Disable Register"
bitfld.long 0x04 12. "SSBED,Scrubbed single-bit ECC error disable" "No,Yes"
bitfld.long 0x04 8. "APED,Address parity error disable" "No,Yes"
bitfld.long 0x04 7. "ACED,Automatic calibration error disable" "No,Yes"
newline
bitfld.long 0x04 4. "CDED,Corrupted data error disable" "No,Yes"
bitfld.long 0x04 3. "MBED,Multiple-bit ECC error disable" "No,Yes"
bitfld.long 0x04 2. "SBED,Single-bit ECC error disable" "No,Yes"
newline
bitfld.long 0x04 0. "MSED,Memory select error disable" "No,Yes"
line.long 0x08 "ERR_INT_EN,Memory Error Interrupt Enable Register"
bitfld.long 0x08 12. "SSBEE,Scrubbed single-bit ECC error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 8. "APEE,Address parity error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 7. "ACEE,Automatic calibration error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 4. "CDEE,Corrupted data error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 3. "MBEE,Multiple-bit ECC error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 2. "SBEE,Single-bit ECC error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 0. "MSEE,Memory select error interrupt enable" "Disabled,Enabled"
line.long 0x0C "CAPTURE_ATTRIBUTES,Memory Error Attributes Capture Register"
bitfld.long 0x0C 28.--30. "BNUM,Data beat number" "0,1,2,3,4,5,6,7"
bitfld.long 0x0C 24.--26. "TSIZ,Transaction size for the error in double words" "8 double words,1 double word,2 double words,3 double words,4 double words,5 double words,6 double words,7 double words"
hexmask.long.byte 0x0C 16.--23. 1. "TSRC,Transaction source for the error"
newline
bitfld.long 0x0C 12.--13. "TTYP,Transaction type for the error" ",Write,Read,Read-modify-write"
bitfld.long 0x0C 0. "VLD,Valid" "Not valid,Valid"
line.long 0x10 "CAPTURE_ADDRESS,Memory Error Address Capture Register"
line.long 0x14 "CAPTURE_EXT_ADDRESS,Memory Error Extended Address Capture Register"
hexmask.long.byte 0x14 0.--7. 0x01 "CEADDR,Captured extended address"
line.long 0x18 "ERR_SBE,Single-Bit ECC Memory Error Management Register"
hexmask.long.byte 0x18 24.--31. 1. "SSBET,Scrubbed single-bit error threshold"
hexmask.long.byte 0x18 16.--23. 1. "SBET,Single-bit error threshold"
hexmask.long.byte 0x18 8.--15. 1. "SSBEC,Scrubbed single-bit error counter"
newline
hexmask.long.byte 0x18 0.--7. 1. "SBEC,Single-bit error counter"
tree.end
tree "DUART (Dual Universal Asynchronous Receiver/Transmitters)"
tree "UART1"
base ad:0x021C0500
if (((per.b(ad:0x021C0500+0x03))&0x80)==0x80)
hgroup.byte 0x00++0x00
hide.byte 0x00 "URBR1/UTHR1,UART Receiver Buffer/Transmitter Holding Register"
in
newline
group.byte 0x01++0x00
line.byte 0x00 "UDMB1,UART Divisor Most Significant Byte Register"
newline
hgroup.byte 0x02++0x00
hide.byte 0x00 "UFCR1/UIIR1,UART FIFO Control/Interrupt ID Register"
in
newline
else
group.byte 0x00++0x00
line.byte 0x00 "UDLB1,UART Divisor Least Significant Byte Register"
group.byte 0x01++0x00
line.byte 0x00 "UIER1,UART Interrupt Enable Register"
bitfld.byte 0x00 2. "ERLSI,Enables receiver line status interrupt" "Disabled,Enabled"
bitfld.byte 0x00 1. "ETHREI,Enables transmitter holding register empty interrupt" "Disabled,Enabled"
bitfld.byte 0x00 0. "ERDAI,Enables received data available interrupt" "Disabled,Enabled"
group.byte 0x02++0x00
line.byte 0x00 "UAFR1,UART Alternate Function Register"
bitfld.byte 0x00 1. "BO,Baud clock select" "Not gated,Gated"
bitfld.byte 0x00 0. "CW,Concurrent write enable" "Disabled,Enabled"
endif
if ((per.b(ad:0x021C0500+0x03))&0x03)==0x00
group.byte 0x03++0x00
line.byte 0x00 "ULCR1,UART Line Control Register"
bitfld.byte 0x00 7. "DLAB,Divisor latch access bit" "Not set,Set"
bitfld.byte 0x00 6. "SB,Set break" "Not set,Set"
bitfld.byte 0x00 3.--5. "PEN_EPS_SP,Stick parity/Even parity select/Parity enable" "No parity,No parity,No parity,No parity,Odd parity,Mark parity,Even parity,Space parity"
newline
bitfld.byte 0x00 2. "NSTB,Number of STOP bits" "1,1 1/2"
bitfld.byte 0x00 0.--1. "WLS,Word length select" "5 bits,6 bits,7 bits,8 bits"
else
group.byte 0x03++0x00
line.byte 0x00 "ULCR1,UART Line Control Register"
bitfld.byte 0x00 7. "DLAB,Divisor latch access bit" "Not set,Set"
bitfld.byte 0x00 6. "SB,Set break" "Not set,Set"
bitfld.byte 0x00 3.--5. "PEN_EPS_SP,Stick parity/Even parity select/Parity enable" "No parity,No parity,No parity,No parity,Odd parity,Mark parity,Even parity,Space parity"
newline
bitfld.byte 0x00 2. "NSTB,Number of STOP bits" "1,2"
bitfld.byte 0x00 0.--1. "WLS,Word length select" "5 bits,6 bits,7 bits,8 bits"
endif
newline
hgroup.byte 0x05++0x00
hide.byte 0x00 "ULSR1,UART Line Status Register"
in
newline
if (((per.b(ad:0x021C0500+0x03))&0x80)==0x00)
group.byte 0x07++0x00
line.byte 0x00 "USCR1,UART Scratch Register"
rgroup.byte 0x10++0x00
line.byte 0x00 "UDSR1,UART DMA Status Register"
bitfld.byte 0x00 1. "TXRDY,Transmitter ready" "Cleared,Set"
bitfld.byte 0x00 0. "RXRDY,Receiver ready" "Cleared,Set"
else
hgroup.byte 0x07++0x00
hide.byte 0x00 "USCR1,UART Scratch Register"
hgroup.byte 0x10++0x00
hide.byte 0x00 "UDSR1,UART DMA Status Register"
endif
tree.end
tree "UART2"
base ad:0x021C0600
if (((per.b(ad:0x021C0600+0x03))&0x80)==0x80)
hgroup.byte 0x00++0x00
hide.byte 0x00 "URBR2/UTHR2,UART Receiver Buffer/Transmitter Holding Register"
in
newline
group.byte 0x01++0x00
line.byte 0x00 "UDMB2,UART Divisor Most Significant Byte Register"
newline
hgroup.byte 0x02++0x00
hide.byte 0x00 "UFCR2/UIIR2,UART FIFO Control/Interrupt ID Register"
in
newline
else
group.byte 0x00++0x00
line.byte 0x00 "UDLB2,UART Divisor Least Significant Byte Register"
group.byte 0x01++0x00
line.byte 0x00 "UIER2,UART Interrupt Enable Register"
bitfld.byte 0x00 2. "ERLSI,Enables receiver line status interrupt" "Disabled,Enabled"
bitfld.byte 0x00 1. "ETHREI,Enables transmitter holding register empty interrupt" "Disabled,Enabled"
bitfld.byte 0x00 0. "ERDAI,Enables received data available interrupt" "Disabled,Enabled"
group.byte 0x02++0x00
line.byte 0x00 "UAFR2,UART Alternate Function Register"
bitfld.byte 0x00 1. "BO,Baud clock select" "Not gated,Gated"
bitfld.byte 0x00 0. "CW,Concurrent write enable" "Disabled,Enabled"
endif
if ((per.b(ad:0x021C0600+0x03))&0x03)==0x00
group.byte 0x03++0x00
line.byte 0x00 "ULCR2,UART Line Control Register"
bitfld.byte 0x00 7. "DLAB,Divisor latch access bit" "Not set,Set"
bitfld.byte 0x00 6. "SB,Set break" "Not set,Set"
bitfld.byte 0x00 3.--5. "PEN_EPS_SP,Stick parity/Even parity select/Parity enable" "No parity,No parity,No parity,No parity,Odd parity,Mark parity,Even parity,Space parity"
newline
bitfld.byte 0x00 2. "NSTB,Number of STOP bits" "1,1 1/2"
bitfld.byte 0x00 0.--1. "WLS,Word length select" "5 bits,6 bits,7 bits,8 bits"
else
group.byte 0x03++0x00
line.byte 0x00 "ULCR2,UART Line Control Register"
bitfld.byte 0x00 7. "DLAB,Divisor latch access bit" "Not set,Set"
bitfld.byte 0x00 6. "SB,Set break" "Not set,Set"
bitfld.byte 0x00 3.--5. "PEN_EPS_SP,Stick parity/Even parity select/Parity enable" "No parity,No parity,No parity,No parity,Odd parity,Mark parity,Even parity,Space parity"
newline
bitfld.byte 0x00 2. "NSTB,Number of STOP bits" "1,2"
bitfld.byte 0x00 0.--1. "WLS,Word length select" "5 bits,6 bits,7 bits,8 bits"
endif
newline
hgroup.byte 0x05++0x00
hide.byte 0x00 "ULSR2,UART Line Status Register"
in
newline
if (((per.b(ad:0x021C0600+0x03))&0x80)==0x00)
group.byte 0x07++0x00
line.byte 0x00 "USCR2,UART Scratch Register"
rgroup.byte 0x10++0x00
line.byte 0x00 "UDSR2,UART DMA Status Register"
bitfld.byte 0x00 1. "TXRDY,Transmitter ready" "Cleared,Set"
bitfld.byte 0x00 0. "RXRDY,Receiver ready" "Cleared,Set"
else
hgroup.byte 0x07++0x00
hide.byte 0x00 "USCR2,UART Scratch Register"
hgroup.byte 0x10++0x00
hide.byte 0x00 "UDSR2,UART DMA Status Register"
endif
tree.end
tree.end
tree "DMAMUX (Direct Memory Access Multiplexer)"
tree "DMAMUX1"
base ad:0x022D0000
group.byte 0x0++0x00
line.byte 0x00 "DMAMUX1_CHCFG3,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0x1++0x00
line.byte 0x00 "DMAMUX1_CHCFG2,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0x2++0x00
line.byte 0x00 "DMAMUX1_CHCFG1,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0x3++0x00
line.byte 0x00 "DMAMUX1_CHCFG0,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0x4++0x00
line.byte 0x00 "DMAMUX1_CHCFG7,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0x5++0x00
line.byte 0x00 "DMAMUX1_CHCFG6,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0x6++0x00
line.byte 0x00 "DMAMUX1_CHCFG5,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0x7++0x00
line.byte 0x00 "DMAMUX1_CHCFG4,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0x8++0x00
line.byte 0x00 "DMAMUX1_CHCFG11,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0x9++0x00
line.byte 0x00 "DMAMUX1_CHCFG10,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0xA++0x00
line.byte 0x00 "DMAMUX1_CHCFG9,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0xB++0x00
line.byte 0x00 "DMAMUX1_CHCFG8,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0xC++0x00
line.byte 0x00 "DMAMUX1_CHCFG15,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0xD++0x00
line.byte 0x00 "DMAMUX1_CHCFG14,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0xE++0x00
line.byte 0x00 "DMAMUX1_CHCFG13,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
group.byte 0xF++0x00
line.byte 0x00 "DMAMUX1_CHCFG12,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",SPI3,SPI3 RFDF,FlexTimer6[0],FlexTimer6[1],FlexTimer6[2],FlexTimer6[3],FlexTimer6[4],FlexTimer6[5],FlexTimer6[6],FlexTimer6[7],FlexTimer5[0],FlexTimer5[1],FlexTimer5[2],FlexTimer5[3],FlexTimer5[4],FlexTimer5[5],FlexTimer5[6],FlexTimer5[7],FlexTimer4[0],FlexTimer4[1],FlexTimer4[2],FlexTimer4[3],FlexTimer4[4],FlexTimer4[5],FlexTimer4[6],FlexTimer4[7],FlexTimer3[0],FlexTimer3[1],FlexTimer3[2],FlexTimer3[3],FlexTimer3[4],FlexTimer3[5],FlexTimer3[6],FlexTimer3[7],FlexTimer2[0],FlexTimer2[1],FlexTimer2[2],FlexTimer2[3],FlexTimer2[4],FlexTimer2[5],FlexTimer2[6],FlexTimer2[7],FlexTimer1[0],FlexTimer1[1],FlexTimer1[2],FlexTimer1[3],FlexTimer1[4],FlexTimer1[5],FlexTimer1[6],FlexTimer1[7],CAN1 REQ,CAN2 REQ,SPI3 CMD,SPI3 TF,SPI2,SPI2 RFDF,SPI2 CMD,SPI2 TF,SPI1,SPI1 RFDF,SPI1 CMD,SPI1 TF,Always enabled"
tree.end
tree "DMAMUX2"
base ad:0x022E0000
group.byte 0x0++0x00
line.byte 0x00 "DMAMUX2_CHCFG3,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0x1++0x00
line.byte 0x00 "DMAMUX2_CHCFG2,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0x2++0x00
line.byte 0x00 "DMAMUX2_CHCFG1,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0x3++0x00
line.byte 0x00 "DMAMUX2_CHCFG0,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0x4++0x00
line.byte 0x00 "DMAMUX2_CHCFG7,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0x5++0x00
line.byte 0x00 "DMAMUX2_CHCFG6,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0x6++0x00
line.byte 0x00 "DMAMUX2_CHCFG5,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0x7++0x00
line.byte 0x00 "DMAMUX2_CHCFG4,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0x8++0x00
line.byte 0x00 "DMAMUX2_CHCFG11,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0x9++0x00
line.byte 0x00 "DMAMUX2_CHCFG10,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0xA++0x00
line.byte 0x00 "DMAMUX2_CHCFG9,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0xB++0x00
line.byte 0x00 "DMAMUX2_CHCFG8,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0xC++0x00
line.byte 0x00 "DMAMUX2_CHCFG15,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0xD++0x00
line.byte 0x00 "DMAMUX2_CHCFG14,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0xE++0x00
line.byte 0x00 "DMAMUX2_CHCFG13,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
group.byte 0xF++0x00
line.byte 0x00 "DMAMUX2_CHCFG12,Channel Configuration Register"
bitfld.byte 0x00 7. "ENBL,DMA channel enable" "Disabled,Enabled"
bitfld.byte 0x00 0.--5. "SOURCE,DMA channel source (Slot)" ",,,SAI1 RX,SAI1 TX,SAI2 RX,SAI2 TX,SAI3 RX,SAI3 TX,SAI4 RX,SAI4 TX,SAI5 RX,SAI5 TX,SAI6 RX,SAI6 TX,,IIC8 RX,IIC8 TX,FlexTimer7[7],FlexSPI RXWA,FlexSPI TXWE,,LPUART6 RX,LPUART6 TX,LPUART5 RX,LPUART5 TX,LPUART4 RX,LPUART4 TX,LPUART3 RX,LPUART3 TX,LPUART2 RX,LPUART2 TX,LPUART1 RX,LPUART1 TX,IIC3 RX,IIC3 TX,IIC2 RX,IIC2 TX,IIC1 RX,IIC1 TX,IIC4 RX,IIC4 TX,IIC5 RX,IIC5 TX,IIC6 RX,IIC6 TX,IIC7 RX,IIC7 TX,FlexTimer8[0],FlexTimer8[1],FlexTimer8[2],FlexTimer8[3],FlexTimer8[4],FlexTimer8[5],FlexTimer8[6],FlexTimer8[7],FlexTimer7[0],FlexTimer7[1],FlexTimer7[2],FlexTimer7[3],FlexTimer7[4],FlexTimer7[5],FlexTimer7[6],Always enabled"
tree.end
tree.end
tree "eDMA (Enhanced Direct Memory Access)"
base ad:0x022C0000
group.long 0x00++0x03
line.long 0x00 "CR,Control Register"
bitfld.long 0x00 17. "CX,Cancel transfer" "Not canceled,Canceled"
bitfld.long 0x00 16. "ECX,Error cancel transfer" "Not canceled,Canceled"
bitfld.long 0x00 10. "GRP1PRI,Channel group 1 priority" "Low,High"
bitfld.long 0x00 8. "GRP0PRI,Channel group 0 priority" "Low,High"
newline
bitfld.long 0x00 7. "EMLM,Enable minor loop mapping" "Disabled,Enabled"
bitfld.long 0x00 6. "CLM,Continuous link mode" "Arbitration,No arbitration"
bitfld.long 0x00 5. "HALT,Halt DMA operations" "Not halted,Halted"
bitfld.long 0x00 4. "HOE,Halt on error" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "ERGA,Enable round robin group arbitration" "Fixed priority,Round robin"
bitfld.long 0x00 2. "ERCA,Enable round robin channel arbitration" "Fixed priority,Round robin"
bitfld.long 0x00 1. "EDBG,Enable debug" "DMA not stalled,New DMA channel start stalled"
newline
rgroup.long 0x04++0x03
line.long 0x00 "ES,Error Status Register"
bitfld.long 0x00 31. "VLD,Logical OR of all ERR status bits" "No error,Error"
bitfld.long 0x00 16. "ECX,Transfer canceled" "No error,Error"
bitfld.long 0x00 15. "GPE,Group priority error" "No error,Error"
bitfld.long 0x00 14. "CPE,Channel priority error" "No error,Error"
newline
bitfld.long 0x00 8.--12. "ERR_CHN,Error channel number or canceled channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 7. "SAE,Source address error" "No error,Error"
bitfld.long 0x00 6. "SOE,Source offset error" "No error,Error"
bitfld.long 0x00 5. "DAE,Destination address error" "No error,Error"
newline
bitfld.long 0x00 4. "DOE,Destination offset error" "No error,Error"
bitfld.long 0x00 3. "NCE,NBYTES/CITER configuration error" "No error,Error"
bitfld.long 0x00 2. "SGE,Scatter/gather configuration error" "No error,Error"
bitfld.long 0x00 1. "SBE,Source bus error" "No error,Error"
newline
bitfld.long 0x00 0. "DBE,Destination bus error" "No error,Error"
group.long 0x0C++0x03
line.long 0x00 "ERQ,Enable Request Register"
bitfld.long 0x00 31. "ERQ[31],Enable DMA request 31" "Disabled,Enabled"
bitfld.long 0x00 30. "[30],Enable DMA request 30" "Disabled,Enabled"
bitfld.long 0x00 29. "[29],Enable DMA request 29" "Disabled,Enabled"
bitfld.long 0x00 28. "[28],Enable DMA request 28" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "[27],Enable DMA request 27" "Disabled,Enabled"
bitfld.long 0x00 26. "[26],Enable DMA request 26" "Disabled,Enabled"
bitfld.long 0x00 25. "[25],Enable DMA request 25" "Disabled,Enabled"
bitfld.long 0x00 24. "[24],Enable DMA request 24" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "[23],Enable DMA request 23" "Disabled,Enabled"
bitfld.long 0x00 22. "[22],Enable DMA request 22" "Disabled,Enabled"
bitfld.long 0x00 21. "[21],Enable DMA request 21" "Disabled,Enabled"
bitfld.long 0x00 20. "[20],Enable DMA request 20" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "[19],Enable DMA request 19" "Disabled,Enabled"
bitfld.long 0x00 18. "[18],Enable DMA request 18" "Disabled,Enabled"
bitfld.long 0x00 17. "[17],Enable DMA request 17" "Disabled,Enabled"
bitfld.long 0x00 16. "[16],Enable DMA request 16" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "[15],Enable DMA request 15" "Disabled,Enabled"
bitfld.long 0x00 14. "[14],Enable DMA request 14" "Disabled,Enabled"
bitfld.long 0x00 13. "[13],Enable DMA request 13" "Disabled,Enabled"
bitfld.long 0x00 12. "[12],Enable DMA request 12" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "[11],Enable DMA request 11" "Disabled,Enabled"
bitfld.long 0x00 10. "[10],Enable DMA request 10" "Disabled,Enabled"
bitfld.long 0x00 9. "[9],Enable DMA request 9" "Disabled,Enabled"
bitfld.long 0x00 8. "[8],Enable DMA request 8" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "[7],Enable DMA request 7" "Disabled,Enabled"
bitfld.long 0x00 6. "[6],Enable DMA request 6" "Disabled,Enabled"
bitfld.long 0x00 5. "[5],Enable DMA request 5" "Disabled,Enabled"
bitfld.long 0x00 4. "[4],Enable DMA request 4" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "[3],Enable DMA request 3" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],Enable DMA request 2" "Disabled,Enabled"
bitfld.long 0x00 1. "[1],Enable DMA request 1" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],Enable DMA request 0" "Disabled,Enabled"
group.long 0x14++0x03
line.long 0x00 "EEI,Enable Error Interrupt Register"
bitfld.long 0x00 31. "EEI[31],Enable error interrupt 31" "Disabled,Enabled"
bitfld.long 0x00 30. "[30],Enable error interrupt 30" "Disabled,Enabled"
bitfld.long 0x00 29. "[29],Enable error interrupt 29" "Disabled,Enabled"
bitfld.long 0x00 28. "[28],Enable error interrupt 28" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "[27],Enable error interrupt 27" "Disabled,Enabled"
bitfld.long 0x00 26. "[26],Enable error interrupt 26" "Disabled,Enabled"
bitfld.long 0x00 25. "[25],Enable error interrupt 25" "Disabled,Enabled"
bitfld.long 0x00 24. "[24],Enable error interrupt 24" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "[23],Enable error interrupt 23" "Disabled,Enabled"
bitfld.long 0x00 22. "[22],Enable error interrupt 22" "Disabled,Enabled"
bitfld.long 0x00 21. "[21],Enable error interrupt 21" "Disabled,Enabled"
bitfld.long 0x00 20. "[20],Enable error interrupt 20" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "[19],Enable error interrupt 19" "Disabled,Enabled"
bitfld.long 0x00 18. "[18],Enable error interrupt 18" "Disabled,Enabled"
bitfld.long 0x00 17. "[17],Enable error interrupt 17" "Disabled,Enabled"
bitfld.long 0x00 16. "[16],Enable error interrupt 16" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "[15],Enable error interrupt 15" "Disabled,Enabled"
bitfld.long 0x00 14. "[14],Enable error interrupt 14" "Disabled,Enabled"
bitfld.long 0x00 13. "[13],Enable error interrupt 13" "Disabled,Enabled"
bitfld.long 0x00 12. "[12],Enable error interrupt 12" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "[11],Enable error interrupt 11" "Disabled,Enabled"
bitfld.long 0x00 10. "[10],Enable error interrupt 10" "Disabled,Enabled"
bitfld.long 0x00 9. "[9],Enable error interrupt 9" "Disabled,Enabled"
bitfld.long 0x00 8. "[8],Enable error interrupt 8" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "[7],Enable error interrupt 7" "Disabled,Enabled"
bitfld.long 0x00 6. "[6],Enable error interrupt 6" "Disabled,Enabled"
bitfld.long 0x00 5. "[5],Enable error interrupt 5" "Disabled,Enabled"
bitfld.long 0x00 4. "[4],Enable error interrupt 4" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "[3],Enable error interrupt 3" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],Enable error interrupt 2" "Disabled,Enabled"
bitfld.long 0x00 1. "[1],Enable error interrupt 1" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],Enable error interrupt 0" "Disabled,Enabled"
wgroup.byte 0x18++0x07
line.byte 0x00 "CEEI,Clear Enable Error Interrupt Register"
bitfld.byte 0x00 7. "NOP,No Op enable" "Disable,Enable"
bitfld.byte 0x00 6. "CAEE,Clear all enable error interrupts" "CEEI specified,All EEI bits"
bitfld.byte 0x00 0.--4. "CEEI,Clear enable error interrupt for corresponding bit in EEI" "EEI[31],EEI[30],EEI[29],EEI[28],EEI[27],EEI[26],EEI[25],EEI[24],EEI[23],EEI[22],EEI[21],EEI[20],EEI[19],EEI[18],EEI[17],EEI[16],EEI[15],EEI[14],EEI[13],EEI[12],EEI[11],EEI[10],EEI[9],EEI[8],EEI[7],EEI[6],EEI[5],EEI[4],EEI[3],EEI[2],EEI[1],EEI[0]"
line.byte 0x01 "SEEI,Set Enable Error Interrupt Register"
bitfld.byte 0x01 7. "NOP,No Op enable" "Disable,Enable"
bitfld.byte 0x01 6. "SAEE,Sets all enable error interrupts" "SEEI specified,All EEI bits"
bitfld.byte 0x01 0.--4. "SEEI,Set enable error interrupt for corresponding bit in EEI" "EEI[31],EEI[30],EEI[29],EEI[28],EEI[27],EEI[26],EEI[25],EEI[24],EEI[23],EEI[22],EEI[21],EEI[20],EEI[19],EEI[18],EEI[17],EEI[16],EEI[15],EEI[14],EEI[13],EEI[12],EEI[11],EEI[10],EEI[9],EEI[8],EEI[7],EEI[6],EEI[5],EEI[4],EEI[3],EEI[2],EEI[1],EEI[0]"
line.byte 0x02 "CERQ,Clear Enable Request Register"
bitfld.byte 0x02 7. "NOP,No Op enable" "Disable,Enable"
bitfld.byte 0x02 6. "CAER,Clear all enable requests" "CERQ specified,All ERQ bits"
bitfld.byte 0x02 0.--4. "CERQ,Clear enable request for corresponding bit in ERQ" "ERQ[31],ERQ[30],ERQ[29],ERQ[28],ERQ[27],ERQ[26],ERQ[25],ERQ[24],ERQ[23],ERQ[22],ERQ[21],ERQ[20],ERQ[19],ERQ[18],ERQ[17],ERQ[16],ERQ[15],ERQ[14],ERQ[13],ERQ[12],ERQ[11],ERQ[10],ERQ[9],ERQ[8],ERQ[7],ERQ[6],ERQ[5],ERQ[4],ERQ[3],ERQ[2],ERQ[1],ERQ[0]"
line.byte 0x03 "SERQ,Set Enable Request Register"
bitfld.byte 0x03 7. "NOP,No Op enable" "Disable,Enable"
bitfld.byte 0x03 6. "SAER,Set all enable requests" "SERQ specified,All ERQ bits"
bitfld.byte 0x03 0.--4. "SERQ,Set enable request for corresponding bit in ERQ" "ERQ[31],ERQ[30],ERQ[29],ERQ[28],ERQ[27],ERQ[26],ERQ[25],ERQ[24],ERQ[23],ERQ[22],ERQ[21],ERQ[20],ERQ[19],ERQ[18],ERQ[17],ERQ[16],ERQ[15],ERQ[14],ERQ[13],ERQ[12],ERQ[11],ERQ[10],ERQ[9],ERQ[8],ERQ[7],ERQ[6],ERQ[5],ERQ[4],ERQ[3],ERQ[2],ERQ[1],ERQ[0]"
line.byte 0x04 "CDNE,Clear DONE Status Bit Register"
bitfld.byte 0x04 7. "NOP,No Op enable" "Disable,Enable"
bitfld.byte 0x04 6. "CADN,Clears all DONE bits" "CDNE specified,All CSR[DONE] bits"
bitfld.byte 0x04 0.--4. "CDNE,Clear DONE for TCDn_CSR[DONE]" "TCD31_CSR[DONE],TCD30_CSR[DONE],TCD29_CSR[DONE],TCD28_CSR[DONE],TCD27_CSR[DONE],TCD26_CSR[DONE],TCD25_CSR[DONE],TCD24_CSR[DONE],TCD23_CSR[DONE],TCD22_CSR[DONE],TCD21_CSR[DONE],TCD20_CSR[DONE],TCD19_CSR[DONE],TCD18_CSR[DONE],TCD17_CSR[DONE],TCD16_CSR[DONE],TCD15_CSR[DONE],TCD14_CSR[DONE],TCD13_CSR[DONE],TCD12_CSR[DONE],TCD11_CSR[DONE],TCD10_CSR[DONE],TCD9_CSR[DONE],TCD8_CSR[DONE],TCD7_CSR[DONE],TCD6_CSR[DONE],TCD5_CSR[DONE],TCD4_CSR[DONE],TCD3_CSR[DONE],TCD2_CSR[DONE],TCD1_CSR[DONE],TCD0_CSR[DONE]"
line.byte 0x05 "SSRT,Set START Bit Register"
bitfld.byte 0x05 7. "NOP,No Op enable" "Disable,Enable"
bitfld.byte 0x05 6. "SAST,Set all START bits (activates all channels)" "SSRT specified,All CSR[START] bits"
bitfld.byte 0x05 0.--4. "SSRT,Set START for TCDn_CSR[START]" "TCD31_CSR[START],TCD30_CSR[START],TCD29_CSR[START],TCD28_CSR[START],TCD27_CSR[START],TCD26_CSR[START],TCD25_CSR[START],TCD24_CSR[START],TCD23_CSR[START],TCD22_CSR[START],TCD21_CSR[START],TCD20_CSR[START],TCD19_CSR[START],TCD18_CSR[START],TCD17_CSR[START],TCD16_CSR[START],TCD15_CSR[START],TCD14_CSR[START],TCD13_CSR[START],TCD12_CSR[START],TCD11_CSR[START],TCD10_CSR[START],TCD9_CSR[START],TCD8_CSR[START],TCD7_CSR[START],TCD6_CSR[START],TCD5_CSR[START],TCD4_CSR[START],TCD3_CSR[START],TCD2_CSR[START],TCD1_CSR[START],TCD0_CSR[START]"
line.byte 0x06 "CERR,Clear Error Register"
bitfld.byte 0x06 7. "NOP,No Op enable" "Disable,Enable"
bitfld.byte 0x06 6. "CAEI,Clear all error indicators" "CERR specified,All ERR bits"
bitfld.byte 0x06 0.--4. "CERR,Clear error indicator for corresponding bit in ERR" "ERR[31],ERR[30],ERR[29],ERR[28],ERR[27],ERR[26],ERR[25],ERR[24],ERR[23],ERR[22],ERR[21],ERR[20],ERR[19],ERR[18],ERR[17],ERR[16],ERR[15],ERR[14],ERR[13],ERR[12],ERR[11],ERR[10],ERR[9],ERR[8],ERR[7],ERR[6],ERR[5],ERR[4],ERR[3],ERR[2],ERR[1],ERR[0]"
line.byte 0x07 "CINT,Clear Interrupt Request Register"
bitfld.byte 0x07 7. "NOP,No Op enable" "Disable,Enable"
bitfld.byte 0x07 6. "CAIR,Clear all interrupt requests" "CINT specified,All INT bits"
bitfld.byte 0x07 0.--4. "CINT4,Clear interrupt request bit [4]" "INT[31],INT[30],INT[29],INT[28],INT[27],INT[26],INT[25],INT[24],INT[23],INT[22],INT[21],INT[20],INT[19],INT[18],INT[17],INT[16],INT[15],INT[14],INT[13],INT[12],INT[11],INT[10],INT[9],INT[8],INT[7],INT[6],INT[5],INT[4],INT[3],INT[2],INT[1],INT[0]"
group.long 0x24++0x03
line.long 0x00 "INT,Interrupt Request Register"
eventfld.long 0x00 31. "INT[31],Interrupt request 31" "No interrupt,Interrupt"
eventfld.long 0x00 30. "[30],Interrupt request 30" "No interrupt,Interrupt"
eventfld.long 0x00 29. "[29],Interrupt request 29" "No interrupt,Interrupt"
eventfld.long 0x00 28. "[28],Interrupt request 28" "No interrupt,Interrupt"
newline
eventfld.long 0x00 27. "[27],Interrupt request 27" "No interrupt,Interrupt"
eventfld.long 0x00 26. "[26],Interrupt request 26" "No interrupt,Interrupt"
eventfld.long 0x00 25. "[25],Interrupt request 25" "No interrupt,Interrupt"
eventfld.long 0x00 24. "[24],Interrupt request 24" "No interrupt,Interrupt"
newline
eventfld.long 0x00 23. "[23],Interrupt request 23" "No interrupt,Interrupt"
eventfld.long 0x00 22. "[22],Interrupt request 22" "No interrupt,Interrupt"
eventfld.long 0x00 21. "[21],Interrupt request 21" "No interrupt,Interrupt"
eventfld.long 0x00 20. "[20],Interrupt request 20" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. "[19],Interrupt request 19" "No interrupt,Interrupt"
eventfld.long 0x00 18. "[18],Interrupt request 18" "No interrupt,Interrupt"
eventfld.long 0x00 17. "[17],Interrupt request 17" "No interrupt,Interrupt"
eventfld.long 0x00 16. "[16],Interrupt request 16" "No interrupt,Interrupt"
newline
eventfld.long 0x00 15. "[15],Interrupt request 15" "No interrupt,Interrupt"
eventfld.long 0x00 14. "[14],Interrupt request 14" "No interrupt,Interrupt"
eventfld.long 0x00 13. "[13],Interrupt request 13" "No interrupt,Interrupt"
eventfld.long 0x00 12. "[12],Interrupt request 12" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "[11],Interrupt request 11" "No interrupt,Interrupt"
eventfld.long 0x00 10. "[10],Interrupt request 10" "No interrupt,Interrupt"
eventfld.long 0x00 9. "[9],Interrupt request 9" "No interrupt,Interrupt"
eventfld.long 0x00 8. "[8],Interrupt request 8" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "[7],Interrupt request 7" "No interrupt,Interrupt"
eventfld.long 0x00 6. "[6],Interrupt request 6" "No interrupt,Interrupt"
eventfld.long 0x00 5. "[5],Interrupt request 5" "No interrupt,Interrupt"
eventfld.long 0x00 4. "[4],Interrupt request 4" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "[3],Interrupt request 3" "No interrupt,Interrupt"
eventfld.long 0x00 2. "[2],Interrupt request 2" "No interrupt,Interrupt"
eventfld.long 0x00 1. "[1],Interrupt request 1" "No interrupt,Interrupt"
eventfld.long 0x00 0. "[0],Interrupt request 0" "No interrupt,Interrupt"
group.long 0x2C++0x03
line.long 0x00 "ERR,Error Register"
eventfld.long 0x00 31. "ERR[31],Error in channel 31" "No error,Error"
eventfld.long 0x00 30. "[30],Error in channel 30" "No error,Error"
eventfld.long 0x00 29. "[29],Error in channel 29" "No error,Error"
eventfld.long 0x00 28. "[28],Error in channel 28" "No error,Error"
newline
eventfld.long 0x00 27. "[27],Error in channel 27" "No error,Error"
eventfld.long 0x00 26. "[26],Error in channel 26" "No error,Error"
eventfld.long 0x00 25. "[25],Error in channel 25" "No error,Error"
eventfld.long 0x00 24. "[24],Error in channel 24" "No error,Error"
newline
eventfld.long 0x00 23. "[23],Error in channel 23" "No error,Error"
eventfld.long 0x00 22. "[22],Error in channel 22" "No error,Error"
eventfld.long 0x00 21. "[21],Error in channel 21" "No error,Error"
eventfld.long 0x00 20. "[20],Error in channel 20" "No error,Error"
newline
eventfld.long 0x00 19. "[19],Error in channel 19" "No error,Error"
eventfld.long 0x00 18. "[18],Error in channel 18" "No error,Error"
eventfld.long 0x00 17. "[17],Error in channel 17" "No error,Error"
eventfld.long 0x00 16. "[16],Error in channel 16" "No error,Error"
newline
eventfld.long 0x00 15. "[15],Error in channel 15" "No error,Error"
eventfld.long 0x00 14. "[14],Error in channel 14" "No error,Error"
eventfld.long 0x00 13. "[13],Error in channel 13" "No error,Error"
eventfld.long 0x00 12. "[12],Error in channel 12" "No error,Error"
newline
eventfld.long 0x00 11. "[11],Error in channel 11" "No error,Error"
eventfld.long 0x00 10. "[10],Error in channel 10" "No error,Error"
eventfld.long 0x00 9. "[9],Error in channel 9" "No error,Error"
eventfld.long 0x00 8. "[8],Error in channel 8" "No error,Error"
newline
eventfld.long 0x00 7. "[7],Error in channel 7" "No error,Error"
eventfld.long 0x00 6. "[6],Error in channel 6" "No error,Error"
eventfld.long 0x00 5. "[5],Error in channel 5" "No error,Error"
eventfld.long 0x00 4. "[4],Error in channel 4" "No error,Error"
newline
eventfld.long 0x00 3. "[3],Error in channel 3" "No error,Error"
eventfld.long 0x00 2. "[2],Error in channel 2" "No error,Error"
eventfld.long 0x00 1. "[1],Error in channel 1" "No error,Error"
eventfld.long 0x00 0. "[0],Error in channel 0" "No error,Error"
rgroup.long 0x34++0x03
line.long 0x00 "HRS,Hardware Request Status Register"
bitfld.long 0x00 31. "HRS[31],Hardware request status channel 31" "No request,Request"
bitfld.long 0x00 30. "[30],Hardware request status channel 30" "No request,Request"
bitfld.long 0x00 29. "[29],Hardware request status channel 29" "No request,Request"
bitfld.long 0x00 28. "[28],Hardware request status channel 28" "No request,Request"
newline
bitfld.long 0x00 27. "[27],Hardware request status channel 27" "No request,Request"
bitfld.long 0x00 26. "[26],Hardware request status channel 26" "No request,Request"
bitfld.long 0x00 25. "[25],Hardware request status channel 25" "No request,Request"
bitfld.long 0x00 24. "[24],Hardware request status channel 24" "No request,Request"
newline
bitfld.long 0x00 23. "[23],Hardware request status channel 23" "No request,Request"
bitfld.long 0x00 22. "[22],Hardware request status channel 22" "No request,Request"
bitfld.long 0x00 21. "[21],Hardware request status channel 21" "No request,Request"
bitfld.long 0x00 20. "[20],Hardware request status channel 20" "No request,Request"
newline
bitfld.long 0x00 19. "[19],Hardware request status channel 19" "No request,Request"
bitfld.long 0x00 18. "[18],Hardware request status channel 18" "No request,Request"
bitfld.long 0x00 17. "[17],Hardware request status channel 17" "No request,Request"
bitfld.long 0x00 16. "[16],Hardware request status channel 16" "No request,Request"
newline
bitfld.long 0x00 15. "[15],Hardware request status channel 15" "No request,Request"
bitfld.long 0x00 14. "[14],Hardware request status channel 14" "No request,Request"
bitfld.long 0x00 13. "[13],Hardware request status channel 13" "No request,Request"
bitfld.long 0x00 12. "[12],Hardware request status channel 12" "No request,Request"
newline
bitfld.long 0x00 11. "[11],Hardware request status channel 11" "No request,Request"
bitfld.long 0x00 10. "[10],Hardware request status channel 10" "No request,Request"
bitfld.long 0x00 9. "[9],Hardware request status channel 9" "No request,Request"
bitfld.long 0x00 8. "[8],Hardware request status channel 8" "No request,Request"
newline
bitfld.long 0x00 7. "[7],Hardware request status channel 7" "No request,Request"
bitfld.long 0x00 6. "[6],Hardware request status channel 6" "No request,Request"
bitfld.long 0x00 5. "[5],Hardware request status channel 5" "No request,Request"
bitfld.long 0x00 4. "[4],Hardware request status channel 4" "No request,Request"
newline
bitfld.long 0x00 3. "[3],Hardware request status channel 3" "No request,Request"
bitfld.long 0x00 2. "[2],Hardware request status channel 2" "No request,Request"
bitfld.long 0x00 1. "[1],Hardware request status channel 1" "No request,Request"
bitfld.long 0x00 0. "[0],Hardware request status channel 0" "No request,Request"
group.byte 0x100++0x00
line.byte 0x00 "DCHPRI3,Channel 3 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 3 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 3 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x101++0x00
line.byte 0x00 "DCHPRI2,Channel 2 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 2 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 2 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x102++0x00
line.byte 0x00 "DCHPRI1,Channel 1 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 1 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 1 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x103++0x00
line.byte 0x00 "DCHPRI0,Channel 0 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 0 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 0 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x104++0x00
line.byte 0x00 "DCHPRI7,Channel 7 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 7 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 7 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x105++0x00
line.byte 0x00 "DCHPRI6,Channel 6 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 6 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 6 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x106++0x00
line.byte 0x00 "DCHPRI5,Channel 5 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 5 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 5 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x107++0x00
line.byte 0x00 "DCHPRI4,Channel 4 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 4 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 4 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x108++0x00
line.byte 0x00 "DCHPRI11,Channel 11 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 11 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 11 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x109++0x00
line.byte 0x00 "DCHPRI10,Channel 10 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 10 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 10 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x10A++0x00
line.byte 0x00 "DCHPRI9,Channel 9 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 9 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 9 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x10B++0x00
line.byte 0x00 "DCHPRI8,Channel 8 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 8 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 8 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x10C++0x00
line.byte 0x00 "DCHPRI15,Channel 15 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 15 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 15 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x10D++0x00
line.byte 0x00 "DCHPRI14,Channel 14 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 14 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 14 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x10E++0x00
line.byte 0x00 "DCHPRI13,Channel 13 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 13 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 13 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x10F++0x00
line.byte 0x00 "DCHPRI12,Channel 12 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 12 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 12 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x110++0x00
line.byte 0x00 "DCHPRI19,Channel 19 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 19 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 19 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x111++0x00
line.byte 0x00 "DCHPRI18,Channel 18 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 18 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 18 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x112++0x00
line.byte 0x00 "DCHPRI17,Channel 17 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 17 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 17 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x113++0x00
line.byte 0x00 "DCHPRI16,Channel 16 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 16 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 16 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x114++0x00
line.byte 0x00 "DCHPRI23,Channel 23 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 23 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 23 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x115++0x00
line.byte 0x00 "DCHPRI22,Channel 22 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 22 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 22 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x116++0x00
line.byte 0x00 "DCHPRI21,Channel 21 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 21 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 21 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x117++0x00
line.byte 0x00 "DCHPRI20,Channel 20 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 20 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 20 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x118++0x00
line.byte 0x00 "DCHPRI27,Channel 27 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 27 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 27 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x119++0x00
line.byte 0x00 "DCHPRI26,Channel 26 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 26 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 26 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x11A++0x00
line.byte 0x00 "DCHPRI25,Channel 25 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 25 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 25 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x11B++0x00
line.byte 0x00 "DCHPRI24,Channel 24 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 24 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 24 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x11C++0x00
line.byte 0x00 "DCHPRI31,Channel 31 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 31 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 31 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x11D++0x00
line.byte 0x00 "DCHPRI30,Channel 30 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 30 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 30 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x11E++0x00
line.byte 0x00 "DCHPRI29,Channel 29 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 29 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 29 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
group.byte 0x11F++0x00
line.byte 0x00 "DCHPRI28,Channel 28 Priority Register"
bitfld.byte 0x00 7. "ECP,Enable channel preemption" "Disabled,Enabled"
bitfld.byte 0x00 6. "DPA,Disable preempt ability" "No,Yes"
rbitfld.byte 0x00 4.--5. "GRPPRI,Channel 28 current group priority" "Lowest,1,2,Highest"
bitfld.byte 0x00 0.--3. "CHPRI,Channel 28 arbitration priority" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,Highest"
newline
tree "TCD0"
group.long 0x1000++0x03
line.long 0x00 "TCD0_SADDR,TCD Source Address Register"
group.word (0x1000+0x04)++0x03
line.word 0x00 "TCD0_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD0_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1000+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1000+0x08)++0x03
line.long 0x00 "TCD0_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1000+0x08))&0xC0000000)==0x00)
group.long (0x1000+0x08)++0x03
line.long 0x00 "TCD0_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1000+0x08)++0x03
line.long 0x00 "TCD0_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1000+0x0C)++0x07
line.long 0x00 "TCD0_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD0_DADDR,TCD Destination Address Register"
group.word (0x1000+0x14)++0x01
line.word 0x00 "TCD0_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1000+0x16))&0x8000)==0x8000)
group.word (0x1000+0x16)++0x01
line.word 0x00 "TCD0_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1000+0x16)++0x01
line.word 0x00 "TCD0_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1000+0x18)++0x03
line.long 0x00 "TCD0_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1000+0x1C)++0x01
line.word 0x00 "TCD0_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1000+0x1E))&0x8000)==0x8000)
group.word (0x1000+0x1E)++0x01
line.word 0x00 "TCD0_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1000+0x1E)++0x01
line.word 0x00 "TCD0_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD1"
group.long 0x1020++0x03
line.long 0x00 "TCD1_SADDR,TCD Source Address Register"
group.word (0x1020+0x04)++0x03
line.word 0x00 "TCD1_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD1_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1020+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1020+0x08)++0x03
line.long 0x00 "TCD1_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1020+0x08))&0xC0000000)==0x00)
group.long (0x1020+0x08)++0x03
line.long 0x00 "TCD1_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1020+0x08)++0x03
line.long 0x00 "TCD1_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1020+0x0C)++0x07
line.long 0x00 "TCD1_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD1_DADDR,TCD Destination Address Register"
group.word (0x1020+0x14)++0x01
line.word 0x00 "TCD1_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1020+0x16))&0x8000)==0x8000)
group.word (0x1020+0x16)++0x01
line.word 0x00 "TCD1_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1020+0x16)++0x01
line.word 0x00 "TCD1_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1020+0x18)++0x03
line.long 0x00 "TCD1_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1020+0x1C)++0x01
line.word 0x00 "TCD1_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1020+0x1E))&0x8000)==0x8000)
group.word (0x1020+0x1E)++0x01
line.word 0x00 "TCD1_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1020+0x1E)++0x01
line.word 0x00 "TCD1_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD2"
group.long 0x1040++0x03
line.long 0x00 "TCD2_SADDR,TCD Source Address Register"
group.word (0x1040+0x04)++0x03
line.word 0x00 "TCD2_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD2_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1040+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1040+0x08)++0x03
line.long 0x00 "TCD2_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1040+0x08))&0xC0000000)==0x00)
group.long (0x1040+0x08)++0x03
line.long 0x00 "TCD2_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1040+0x08)++0x03
line.long 0x00 "TCD2_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1040+0x0C)++0x07
line.long 0x00 "TCD2_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD2_DADDR,TCD Destination Address Register"
group.word (0x1040+0x14)++0x01
line.word 0x00 "TCD2_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1040+0x16))&0x8000)==0x8000)
group.word (0x1040+0x16)++0x01
line.word 0x00 "TCD2_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1040+0x16)++0x01
line.word 0x00 "TCD2_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1040+0x18)++0x03
line.long 0x00 "TCD2_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1040+0x1C)++0x01
line.word 0x00 "TCD2_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1040+0x1E))&0x8000)==0x8000)
group.word (0x1040+0x1E)++0x01
line.word 0x00 "TCD2_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1040+0x1E)++0x01
line.word 0x00 "TCD2_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD3"
group.long 0x1060++0x03
line.long 0x00 "TCD3_SADDR,TCD Source Address Register"
group.word (0x1060+0x04)++0x03
line.word 0x00 "TCD3_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD3_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1060+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1060+0x08)++0x03
line.long 0x00 "TCD3_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1060+0x08))&0xC0000000)==0x00)
group.long (0x1060+0x08)++0x03
line.long 0x00 "TCD3_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1060+0x08)++0x03
line.long 0x00 "TCD3_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1060+0x0C)++0x07
line.long 0x00 "TCD3_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD3_DADDR,TCD Destination Address Register"
group.word (0x1060+0x14)++0x01
line.word 0x00 "TCD3_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1060+0x16))&0x8000)==0x8000)
group.word (0x1060+0x16)++0x01
line.word 0x00 "TCD3_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1060+0x16)++0x01
line.word 0x00 "TCD3_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1060+0x18)++0x03
line.long 0x00 "TCD3_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1060+0x1C)++0x01
line.word 0x00 "TCD3_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1060+0x1E))&0x8000)==0x8000)
group.word (0x1060+0x1E)++0x01
line.word 0x00 "TCD3_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1060+0x1E)++0x01
line.word 0x00 "TCD3_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD4"
group.long 0x1080++0x03
line.long 0x00 "TCD4_SADDR,TCD Source Address Register"
group.word (0x1080+0x04)++0x03
line.word 0x00 "TCD4_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD4_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1080+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1080+0x08)++0x03
line.long 0x00 "TCD4_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1080+0x08))&0xC0000000)==0x00)
group.long (0x1080+0x08)++0x03
line.long 0x00 "TCD4_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1080+0x08)++0x03
line.long 0x00 "TCD4_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1080+0x0C)++0x07
line.long 0x00 "TCD4_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD4_DADDR,TCD Destination Address Register"
group.word (0x1080+0x14)++0x01
line.word 0x00 "TCD4_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1080+0x16))&0x8000)==0x8000)
group.word (0x1080+0x16)++0x01
line.word 0x00 "TCD4_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1080+0x16)++0x01
line.word 0x00 "TCD4_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1080+0x18)++0x03
line.long 0x00 "TCD4_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1080+0x1C)++0x01
line.word 0x00 "TCD4_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1080+0x1E))&0x8000)==0x8000)
group.word (0x1080+0x1E)++0x01
line.word 0x00 "TCD4_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1080+0x1E)++0x01
line.word 0x00 "TCD4_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD5"
group.long 0x10A0++0x03
line.long 0x00 "TCD5_SADDR,TCD Source Address Register"
group.word (0x10A0+0x04)++0x03
line.word 0x00 "TCD5_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD5_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x10A0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x10A0+0x08)++0x03
line.long 0x00 "TCD5_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x10A0+0x08))&0xC0000000)==0x00)
group.long (0x10A0+0x08)++0x03
line.long 0x00 "TCD5_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x10A0+0x08)++0x03
line.long 0x00 "TCD5_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x10A0+0x0C)++0x07
line.long 0x00 "TCD5_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD5_DADDR,TCD Destination Address Register"
group.word (0x10A0+0x14)++0x01
line.word 0x00 "TCD5_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x10A0+0x16))&0x8000)==0x8000)
group.word (0x10A0+0x16)++0x01
line.word 0x00 "TCD5_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x10A0+0x16)++0x01
line.word 0x00 "TCD5_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x10A0+0x18)++0x03
line.long 0x00 "TCD5_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x10A0+0x1C)++0x01
line.word 0x00 "TCD5_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x10A0+0x1E))&0x8000)==0x8000)
group.word (0x10A0+0x1E)++0x01
line.word 0x00 "TCD5_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x10A0+0x1E)++0x01
line.word 0x00 "TCD5_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD6"
group.long 0x10C0++0x03
line.long 0x00 "TCD6_SADDR,TCD Source Address Register"
group.word (0x10C0+0x04)++0x03
line.word 0x00 "TCD6_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD6_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x10C0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x10C0+0x08)++0x03
line.long 0x00 "TCD6_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x10C0+0x08))&0xC0000000)==0x00)
group.long (0x10C0+0x08)++0x03
line.long 0x00 "TCD6_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x10C0+0x08)++0x03
line.long 0x00 "TCD6_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x10C0+0x0C)++0x07
line.long 0x00 "TCD6_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD6_DADDR,TCD Destination Address Register"
group.word (0x10C0+0x14)++0x01
line.word 0x00 "TCD6_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x10C0+0x16))&0x8000)==0x8000)
group.word (0x10C0+0x16)++0x01
line.word 0x00 "TCD6_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x10C0+0x16)++0x01
line.word 0x00 "TCD6_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x10C0+0x18)++0x03
line.long 0x00 "TCD6_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x10C0+0x1C)++0x01
line.word 0x00 "TCD6_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x10C0+0x1E))&0x8000)==0x8000)
group.word (0x10C0+0x1E)++0x01
line.word 0x00 "TCD6_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x10C0+0x1E)++0x01
line.word 0x00 "TCD6_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD7"
group.long 0x10E0++0x03
line.long 0x00 "TCD7_SADDR,TCD Source Address Register"
group.word (0x10E0+0x04)++0x03
line.word 0x00 "TCD7_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD7_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x10E0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x10E0+0x08)++0x03
line.long 0x00 "TCD7_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x10E0+0x08))&0xC0000000)==0x00)
group.long (0x10E0+0x08)++0x03
line.long 0x00 "TCD7_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x10E0+0x08)++0x03
line.long 0x00 "TCD7_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x10E0+0x0C)++0x07
line.long 0x00 "TCD7_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD7_DADDR,TCD Destination Address Register"
group.word (0x10E0+0x14)++0x01
line.word 0x00 "TCD7_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x10E0+0x16))&0x8000)==0x8000)
group.word (0x10E0+0x16)++0x01
line.word 0x00 "TCD7_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x10E0+0x16)++0x01
line.word 0x00 "TCD7_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x10E0+0x18)++0x03
line.long 0x00 "TCD7_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x10E0+0x1C)++0x01
line.word 0x00 "TCD7_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x10E0+0x1E))&0x8000)==0x8000)
group.word (0x10E0+0x1E)++0x01
line.word 0x00 "TCD7_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x10E0+0x1E)++0x01
line.word 0x00 "TCD7_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD8"
group.long 0x1100++0x03
line.long 0x00 "TCD8_SADDR,TCD Source Address Register"
group.word (0x1100+0x04)++0x03
line.word 0x00 "TCD8_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD8_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1100+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1100+0x08)++0x03
line.long 0x00 "TCD8_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1100+0x08))&0xC0000000)==0x00)
group.long (0x1100+0x08)++0x03
line.long 0x00 "TCD8_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1100+0x08)++0x03
line.long 0x00 "TCD8_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1100+0x0C)++0x07
line.long 0x00 "TCD8_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD8_DADDR,TCD Destination Address Register"
group.word (0x1100+0x14)++0x01
line.word 0x00 "TCD8_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1100+0x16))&0x8000)==0x8000)
group.word (0x1100+0x16)++0x01
line.word 0x00 "TCD8_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1100+0x16)++0x01
line.word 0x00 "TCD8_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1100+0x18)++0x03
line.long 0x00 "TCD8_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1100+0x1C)++0x01
line.word 0x00 "TCD8_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1100+0x1E))&0x8000)==0x8000)
group.word (0x1100+0x1E)++0x01
line.word 0x00 "TCD8_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1100+0x1E)++0x01
line.word 0x00 "TCD8_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD9"
group.long 0x1120++0x03
line.long 0x00 "TCD9_SADDR,TCD Source Address Register"
group.word (0x1120+0x04)++0x03
line.word 0x00 "TCD9_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD9_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1120+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1120+0x08)++0x03
line.long 0x00 "TCD9_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1120+0x08))&0xC0000000)==0x00)
group.long (0x1120+0x08)++0x03
line.long 0x00 "TCD9_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1120+0x08)++0x03
line.long 0x00 "TCD9_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1120+0x0C)++0x07
line.long 0x00 "TCD9_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD9_DADDR,TCD Destination Address Register"
group.word (0x1120+0x14)++0x01
line.word 0x00 "TCD9_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1120+0x16))&0x8000)==0x8000)
group.word (0x1120+0x16)++0x01
line.word 0x00 "TCD9_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1120+0x16)++0x01
line.word 0x00 "TCD9_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1120+0x18)++0x03
line.long 0x00 "TCD9_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1120+0x1C)++0x01
line.word 0x00 "TCD9_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1120+0x1E))&0x8000)==0x8000)
group.word (0x1120+0x1E)++0x01
line.word 0x00 "TCD9_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1120+0x1E)++0x01
line.word 0x00 "TCD9_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD10"
group.long 0x1140++0x03
line.long 0x00 "TCD10_SADDR,TCD Source Address Register"
group.word (0x1140+0x04)++0x03
line.word 0x00 "TCD10_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD10_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1140+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1140+0x08)++0x03
line.long 0x00 "TCD10_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1140+0x08))&0xC0000000)==0x00)
group.long (0x1140+0x08)++0x03
line.long 0x00 "TCD10_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1140+0x08)++0x03
line.long 0x00 "TCD10_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1140+0x0C)++0x07
line.long 0x00 "TCD10_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD10_DADDR,TCD Destination Address Register"
group.word (0x1140+0x14)++0x01
line.word 0x00 "TCD10_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1140+0x16))&0x8000)==0x8000)
group.word (0x1140+0x16)++0x01
line.word 0x00 "TCD10_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1140+0x16)++0x01
line.word 0x00 "TCD10_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1140+0x18)++0x03
line.long 0x00 "TCD10_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1140+0x1C)++0x01
line.word 0x00 "TCD10_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1140+0x1E))&0x8000)==0x8000)
group.word (0x1140+0x1E)++0x01
line.word 0x00 "TCD10_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1140+0x1E)++0x01
line.word 0x00 "TCD10_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD11"
group.long 0x1160++0x03
line.long 0x00 "TCD11_SADDR,TCD Source Address Register"
group.word (0x1160+0x04)++0x03
line.word 0x00 "TCD11_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD11_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1160+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1160+0x08)++0x03
line.long 0x00 "TCD11_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1160+0x08))&0xC0000000)==0x00)
group.long (0x1160+0x08)++0x03
line.long 0x00 "TCD11_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1160+0x08)++0x03
line.long 0x00 "TCD11_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1160+0x0C)++0x07
line.long 0x00 "TCD11_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD11_DADDR,TCD Destination Address Register"
group.word (0x1160+0x14)++0x01
line.word 0x00 "TCD11_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1160+0x16))&0x8000)==0x8000)
group.word (0x1160+0x16)++0x01
line.word 0x00 "TCD11_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1160+0x16)++0x01
line.word 0x00 "TCD11_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1160+0x18)++0x03
line.long 0x00 "TCD11_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1160+0x1C)++0x01
line.word 0x00 "TCD11_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1160+0x1E))&0x8000)==0x8000)
group.word (0x1160+0x1E)++0x01
line.word 0x00 "TCD11_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1160+0x1E)++0x01
line.word 0x00 "TCD11_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD12"
group.long 0x1180++0x03
line.long 0x00 "TCD12_SADDR,TCD Source Address Register"
group.word (0x1180+0x04)++0x03
line.word 0x00 "TCD12_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD12_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1180+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1180+0x08)++0x03
line.long 0x00 "TCD12_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1180+0x08))&0xC0000000)==0x00)
group.long (0x1180+0x08)++0x03
line.long 0x00 "TCD12_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1180+0x08)++0x03
line.long 0x00 "TCD12_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1180+0x0C)++0x07
line.long 0x00 "TCD12_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD12_DADDR,TCD Destination Address Register"
group.word (0x1180+0x14)++0x01
line.word 0x00 "TCD12_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1180+0x16))&0x8000)==0x8000)
group.word (0x1180+0x16)++0x01
line.word 0x00 "TCD12_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1180+0x16)++0x01
line.word 0x00 "TCD12_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1180+0x18)++0x03
line.long 0x00 "TCD12_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1180+0x1C)++0x01
line.word 0x00 "TCD12_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1180+0x1E))&0x8000)==0x8000)
group.word (0x1180+0x1E)++0x01
line.word 0x00 "TCD12_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1180+0x1E)++0x01
line.word 0x00 "TCD12_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD13"
group.long 0x11A0++0x03
line.long 0x00 "TCD13_SADDR,TCD Source Address Register"
group.word (0x11A0+0x04)++0x03
line.word 0x00 "TCD13_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD13_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x11A0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x11A0+0x08)++0x03
line.long 0x00 "TCD13_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x11A0+0x08))&0xC0000000)==0x00)
group.long (0x11A0+0x08)++0x03
line.long 0x00 "TCD13_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x11A0+0x08)++0x03
line.long 0x00 "TCD13_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x11A0+0x0C)++0x07
line.long 0x00 "TCD13_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD13_DADDR,TCD Destination Address Register"
group.word (0x11A0+0x14)++0x01
line.word 0x00 "TCD13_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x11A0+0x16))&0x8000)==0x8000)
group.word (0x11A0+0x16)++0x01
line.word 0x00 "TCD13_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x11A0+0x16)++0x01
line.word 0x00 "TCD13_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x11A0+0x18)++0x03
line.long 0x00 "TCD13_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x11A0+0x1C)++0x01
line.word 0x00 "TCD13_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x11A0+0x1E))&0x8000)==0x8000)
group.word (0x11A0+0x1E)++0x01
line.word 0x00 "TCD13_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x11A0+0x1E)++0x01
line.word 0x00 "TCD13_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD14"
group.long 0x11C0++0x03
line.long 0x00 "TCD14_SADDR,TCD Source Address Register"
group.word (0x11C0+0x04)++0x03
line.word 0x00 "TCD14_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD14_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x11C0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x11C0+0x08)++0x03
line.long 0x00 "TCD14_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x11C0+0x08))&0xC0000000)==0x00)
group.long (0x11C0+0x08)++0x03
line.long 0x00 "TCD14_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x11C0+0x08)++0x03
line.long 0x00 "TCD14_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x11C0+0x0C)++0x07
line.long 0x00 "TCD14_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD14_DADDR,TCD Destination Address Register"
group.word (0x11C0+0x14)++0x01
line.word 0x00 "TCD14_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x11C0+0x16))&0x8000)==0x8000)
group.word (0x11C0+0x16)++0x01
line.word 0x00 "TCD14_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x11C0+0x16)++0x01
line.word 0x00 "TCD14_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x11C0+0x18)++0x03
line.long 0x00 "TCD14_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x11C0+0x1C)++0x01
line.word 0x00 "TCD14_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x11C0+0x1E))&0x8000)==0x8000)
group.word (0x11C0+0x1E)++0x01
line.word 0x00 "TCD14_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x11C0+0x1E)++0x01
line.word 0x00 "TCD14_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD15"
group.long 0x11E0++0x03
line.long 0x00 "TCD15_SADDR,TCD Source Address Register"
group.word (0x11E0+0x04)++0x03
line.word 0x00 "TCD15_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD15_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x11E0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x11E0+0x08)++0x03
line.long 0x00 "TCD15_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x11E0+0x08))&0xC0000000)==0x00)
group.long (0x11E0+0x08)++0x03
line.long 0x00 "TCD15_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x11E0+0x08)++0x03
line.long 0x00 "TCD15_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x11E0+0x0C)++0x07
line.long 0x00 "TCD15_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD15_DADDR,TCD Destination Address Register"
group.word (0x11E0+0x14)++0x01
line.word 0x00 "TCD15_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x11E0+0x16))&0x8000)==0x8000)
group.word (0x11E0+0x16)++0x01
line.word 0x00 "TCD15_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x11E0+0x16)++0x01
line.word 0x00 "TCD15_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x11E0+0x18)++0x03
line.long 0x00 "TCD15_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x11E0+0x1C)++0x01
line.word 0x00 "TCD15_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x11E0+0x1E))&0x8000)==0x8000)
group.word (0x11E0+0x1E)++0x01
line.word 0x00 "TCD15_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x11E0+0x1E)++0x01
line.word 0x00 "TCD15_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD16"
group.long 0x1200++0x03
line.long 0x00 "TCD16_SADDR,TCD Source Address Register"
group.word (0x1200+0x04)++0x03
line.word 0x00 "TCD16_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD16_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1200+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1200+0x08)++0x03
line.long 0x00 "TCD16_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1200+0x08))&0xC0000000)==0x00)
group.long (0x1200+0x08)++0x03
line.long 0x00 "TCD16_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1200+0x08)++0x03
line.long 0x00 "TCD16_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1200+0x0C)++0x07
line.long 0x00 "TCD16_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD16_DADDR,TCD Destination Address Register"
group.word (0x1200+0x14)++0x01
line.word 0x00 "TCD16_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1200+0x16))&0x8000)==0x8000)
group.word (0x1200+0x16)++0x01
line.word 0x00 "TCD16_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1200+0x16)++0x01
line.word 0x00 "TCD16_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1200+0x18)++0x03
line.long 0x00 "TCD16_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1200+0x1C)++0x01
line.word 0x00 "TCD16_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1200+0x1E))&0x8000)==0x8000)
group.word (0x1200+0x1E)++0x01
line.word 0x00 "TCD16_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1200+0x1E)++0x01
line.word 0x00 "TCD16_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD17"
group.long 0x1220++0x03
line.long 0x00 "TCD17_SADDR,TCD Source Address Register"
group.word (0x1220+0x04)++0x03
line.word 0x00 "TCD17_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD17_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1220+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1220+0x08)++0x03
line.long 0x00 "TCD17_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1220+0x08))&0xC0000000)==0x00)
group.long (0x1220+0x08)++0x03
line.long 0x00 "TCD17_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1220+0x08)++0x03
line.long 0x00 "TCD17_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1220+0x0C)++0x07
line.long 0x00 "TCD17_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD17_DADDR,TCD Destination Address Register"
group.word (0x1220+0x14)++0x01
line.word 0x00 "TCD17_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1220+0x16))&0x8000)==0x8000)
group.word (0x1220+0x16)++0x01
line.word 0x00 "TCD17_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1220+0x16)++0x01
line.word 0x00 "TCD17_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1220+0x18)++0x03
line.long 0x00 "TCD17_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1220+0x1C)++0x01
line.word 0x00 "TCD17_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1220+0x1E))&0x8000)==0x8000)
group.word (0x1220+0x1E)++0x01
line.word 0x00 "TCD17_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1220+0x1E)++0x01
line.word 0x00 "TCD17_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD18"
group.long 0x1240++0x03
line.long 0x00 "TCD18_SADDR,TCD Source Address Register"
group.word (0x1240+0x04)++0x03
line.word 0x00 "TCD18_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD18_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1240+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1240+0x08)++0x03
line.long 0x00 "TCD18_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1240+0x08))&0xC0000000)==0x00)
group.long (0x1240+0x08)++0x03
line.long 0x00 "TCD18_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1240+0x08)++0x03
line.long 0x00 "TCD18_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1240+0x0C)++0x07
line.long 0x00 "TCD18_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD18_DADDR,TCD Destination Address Register"
group.word (0x1240+0x14)++0x01
line.word 0x00 "TCD18_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1240+0x16))&0x8000)==0x8000)
group.word (0x1240+0x16)++0x01
line.word 0x00 "TCD18_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1240+0x16)++0x01
line.word 0x00 "TCD18_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1240+0x18)++0x03
line.long 0x00 "TCD18_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1240+0x1C)++0x01
line.word 0x00 "TCD18_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1240+0x1E))&0x8000)==0x8000)
group.word (0x1240+0x1E)++0x01
line.word 0x00 "TCD18_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1240+0x1E)++0x01
line.word 0x00 "TCD18_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD19"
group.long 0x1260++0x03
line.long 0x00 "TCD19_SADDR,TCD Source Address Register"
group.word (0x1260+0x04)++0x03
line.word 0x00 "TCD19_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD19_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1260+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1260+0x08)++0x03
line.long 0x00 "TCD19_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1260+0x08))&0xC0000000)==0x00)
group.long (0x1260+0x08)++0x03
line.long 0x00 "TCD19_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1260+0x08)++0x03
line.long 0x00 "TCD19_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1260+0x0C)++0x07
line.long 0x00 "TCD19_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD19_DADDR,TCD Destination Address Register"
group.word (0x1260+0x14)++0x01
line.word 0x00 "TCD19_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1260+0x16))&0x8000)==0x8000)
group.word (0x1260+0x16)++0x01
line.word 0x00 "TCD19_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1260+0x16)++0x01
line.word 0x00 "TCD19_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1260+0x18)++0x03
line.long 0x00 "TCD19_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1260+0x1C)++0x01
line.word 0x00 "TCD19_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1260+0x1E))&0x8000)==0x8000)
group.word (0x1260+0x1E)++0x01
line.word 0x00 "TCD19_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1260+0x1E)++0x01
line.word 0x00 "TCD19_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD20"
group.long 0x1280++0x03
line.long 0x00 "TCD20_SADDR,TCD Source Address Register"
group.word (0x1280+0x04)++0x03
line.word 0x00 "TCD20_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD20_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1280+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1280+0x08)++0x03
line.long 0x00 "TCD20_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1280+0x08))&0xC0000000)==0x00)
group.long (0x1280+0x08)++0x03
line.long 0x00 "TCD20_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1280+0x08)++0x03
line.long 0x00 "TCD20_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1280+0x0C)++0x07
line.long 0x00 "TCD20_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD20_DADDR,TCD Destination Address Register"
group.word (0x1280+0x14)++0x01
line.word 0x00 "TCD20_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1280+0x16))&0x8000)==0x8000)
group.word (0x1280+0x16)++0x01
line.word 0x00 "TCD20_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1280+0x16)++0x01
line.word 0x00 "TCD20_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1280+0x18)++0x03
line.long 0x00 "TCD20_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1280+0x1C)++0x01
line.word 0x00 "TCD20_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1280+0x1E))&0x8000)==0x8000)
group.word (0x1280+0x1E)++0x01
line.word 0x00 "TCD20_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1280+0x1E)++0x01
line.word 0x00 "TCD20_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD21"
group.long 0x12A0++0x03
line.long 0x00 "TCD21_SADDR,TCD Source Address Register"
group.word (0x12A0+0x04)++0x03
line.word 0x00 "TCD21_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD21_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x12A0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x12A0+0x08)++0x03
line.long 0x00 "TCD21_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x12A0+0x08))&0xC0000000)==0x00)
group.long (0x12A0+0x08)++0x03
line.long 0x00 "TCD21_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x12A0+0x08)++0x03
line.long 0x00 "TCD21_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x12A0+0x0C)++0x07
line.long 0x00 "TCD21_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD21_DADDR,TCD Destination Address Register"
group.word (0x12A0+0x14)++0x01
line.word 0x00 "TCD21_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x12A0+0x16))&0x8000)==0x8000)
group.word (0x12A0+0x16)++0x01
line.word 0x00 "TCD21_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x12A0+0x16)++0x01
line.word 0x00 "TCD21_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x12A0+0x18)++0x03
line.long 0x00 "TCD21_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x12A0+0x1C)++0x01
line.word 0x00 "TCD21_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x12A0+0x1E))&0x8000)==0x8000)
group.word (0x12A0+0x1E)++0x01
line.word 0x00 "TCD21_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x12A0+0x1E)++0x01
line.word 0x00 "TCD21_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD22"
group.long 0x12C0++0x03
line.long 0x00 "TCD22_SADDR,TCD Source Address Register"
group.word (0x12C0+0x04)++0x03
line.word 0x00 "TCD22_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD22_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x12C0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x12C0+0x08)++0x03
line.long 0x00 "TCD22_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x12C0+0x08))&0xC0000000)==0x00)
group.long (0x12C0+0x08)++0x03
line.long 0x00 "TCD22_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x12C0+0x08)++0x03
line.long 0x00 "TCD22_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x12C0+0x0C)++0x07
line.long 0x00 "TCD22_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD22_DADDR,TCD Destination Address Register"
group.word (0x12C0+0x14)++0x01
line.word 0x00 "TCD22_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x12C0+0x16))&0x8000)==0x8000)
group.word (0x12C0+0x16)++0x01
line.word 0x00 "TCD22_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x12C0+0x16)++0x01
line.word 0x00 "TCD22_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x12C0+0x18)++0x03
line.long 0x00 "TCD22_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x12C0+0x1C)++0x01
line.word 0x00 "TCD22_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x12C0+0x1E))&0x8000)==0x8000)
group.word (0x12C0+0x1E)++0x01
line.word 0x00 "TCD22_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x12C0+0x1E)++0x01
line.word 0x00 "TCD22_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD23"
group.long 0x12E0++0x03
line.long 0x00 "TCD23_SADDR,TCD Source Address Register"
group.word (0x12E0+0x04)++0x03
line.word 0x00 "TCD23_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD23_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x12E0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x12E0+0x08)++0x03
line.long 0x00 "TCD23_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x12E0+0x08))&0xC0000000)==0x00)
group.long (0x12E0+0x08)++0x03
line.long 0x00 "TCD23_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x12E0+0x08)++0x03
line.long 0x00 "TCD23_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x12E0+0x0C)++0x07
line.long 0x00 "TCD23_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD23_DADDR,TCD Destination Address Register"
group.word (0x12E0+0x14)++0x01
line.word 0x00 "TCD23_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x12E0+0x16))&0x8000)==0x8000)
group.word (0x12E0+0x16)++0x01
line.word 0x00 "TCD23_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x12E0+0x16)++0x01
line.word 0x00 "TCD23_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x12E0+0x18)++0x03
line.long 0x00 "TCD23_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x12E0+0x1C)++0x01
line.word 0x00 "TCD23_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x12E0+0x1E))&0x8000)==0x8000)
group.word (0x12E0+0x1E)++0x01
line.word 0x00 "TCD23_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x12E0+0x1E)++0x01
line.word 0x00 "TCD23_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD24"
group.long 0x1300++0x03
line.long 0x00 "TCD24_SADDR,TCD Source Address Register"
group.word (0x1300+0x04)++0x03
line.word 0x00 "TCD24_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD24_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1300+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1300+0x08)++0x03
line.long 0x00 "TCD24_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1300+0x08))&0xC0000000)==0x00)
group.long (0x1300+0x08)++0x03
line.long 0x00 "TCD24_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1300+0x08)++0x03
line.long 0x00 "TCD24_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1300+0x0C)++0x07
line.long 0x00 "TCD24_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD24_DADDR,TCD Destination Address Register"
group.word (0x1300+0x14)++0x01
line.word 0x00 "TCD24_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1300+0x16))&0x8000)==0x8000)
group.word (0x1300+0x16)++0x01
line.word 0x00 "TCD24_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1300+0x16)++0x01
line.word 0x00 "TCD24_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1300+0x18)++0x03
line.long 0x00 "TCD24_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1300+0x1C)++0x01
line.word 0x00 "TCD24_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1300+0x1E))&0x8000)==0x8000)
group.word (0x1300+0x1E)++0x01
line.word 0x00 "TCD24_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1300+0x1E)++0x01
line.word 0x00 "TCD24_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD25"
group.long 0x1320++0x03
line.long 0x00 "TCD25_SADDR,TCD Source Address Register"
group.word (0x1320+0x04)++0x03
line.word 0x00 "TCD25_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD25_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1320+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1320+0x08)++0x03
line.long 0x00 "TCD25_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1320+0x08))&0xC0000000)==0x00)
group.long (0x1320+0x08)++0x03
line.long 0x00 "TCD25_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1320+0x08)++0x03
line.long 0x00 "TCD25_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1320+0x0C)++0x07
line.long 0x00 "TCD25_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD25_DADDR,TCD Destination Address Register"
group.word (0x1320+0x14)++0x01
line.word 0x00 "TCD25_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1320+0x16))&0x8000)==0x8000)
group.word (0x1320+0x16)++0x01
line.word 0x00 "TCD25_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1320+0x16)++0x01
line.word 0x00 "TCD25_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1320+0x18)++0x03
line.long 0x00 "TCD25_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1320+0x1C)++0x01
line.word 0x00 "TCD25_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1320+0x1E))&0x8000)==0x8000)
group.word (0x1320+0x1E)++0x01
line.word 0x00 "TCD25_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1320+0x1E)++0x01
line.word 0x00 "TCD25_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD26"
group.long 0x1340++0x03
line.long 0x00 "TCD26_SADDR,TCD Source Address Register"
group.word (0x1340+0x04)++0x03
line.word 0x00 "TCD26_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD26_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1340+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1340+0x08)++0x03
line.long 0x00 "TCD26_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1340+0x08))&0xC0000000)==0x00)
group.long (0x1340+0x08)++0x03
line.long 0x00 "TCD26_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1340+0x08)++0x03
line.long 0x00 "TCD26_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1340+0x0C)++0x07
line.long 0x00 "TCD26_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD26_DADDR,TCD Destination Address Register"
group.word (0x1340+0x14)++0x01
line.word 0x00 "TCD26_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1340+0x16))&0x8000)==0x8000)
group.word (0x1340+0x16)++0x01
line.word 0x00 "TCD26_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1340+0x16)++0x01
line.word 0x00 "TCD26_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1340+0x18)++0x03
line.long 0x00 "TCD26_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1340+0x1C)++0x01
line.word 0x00 "TCD26_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1340+0x1E))&0x8000)==0x8000)
group.word (0x1340+0x1E)++0x01
line.word 0x00 "TCD26_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1340+0x1E)++0x01
line.word 0x00 "TCD26_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD27"
group.long 0x1360++0x03
line.long 0x00 "TCD27_SADDR,TCD Source Address Register"
group.word (0x1360+0x04)++0x03
line.word 0x00 "TCD27_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD27_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1360+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1360+0x08)++0x03
line.long 0x00 "TCD27_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1360+0x08))&0xC0000000)==0x00)
group.long (0x1360+0x08)++0x03
line.long 0x00 "TCD27_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1360+0x08)++0x03
line.long 0x00 "TCD27_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1360+0x0C)++0x07
line.long 0x00 "TCD27_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD27_DADDR,TCD Destination Address Register"
group.word (0x1360+0x14)++0x01
line.word 0x00 "TCD27_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1360+0x16))&0x8000)==0x8000)
group.word (0x1360+0x16)++0x01
line.word 0x00 "TCD27_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1360+0x16)++0x01
line.word 0x00 "TCD27_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1360+0x18)++0x03
line.long 0x00 "TCD27_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1360+0x1C)++0x01
line.word 0x00 "TCD27_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1360+0x1E))&0x8000)==0x8000)
group.word (0x1360+0x1E)++0x01
line.word 0x00 "TCD27_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1360+0x1E)++0x01
line.word 0x00 "TCD27_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD28"
group.long 0x1380++0x03
line.long 0x00 "TCD28_SADDR,TCD Source Address Register"
group.word (0x1380+0x04)++0x03
line.word 0x00 "TCD28_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD28_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1380+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x1380+0x08)++0x03
line.long 0x00 "TCD28_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x1380+0x08))&0xC0000000)==0x00)
group.long (0x1380+0x08)++0x03
line.long 0x00 "TCD28_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x1380+0x08)++0x03
line.long 0x00 "TCD28_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x1380+0x0C)++0x07
line.long 0x00 "TCD28_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD28_DADDR,TCD Destination Address Register"
group.word (0x1380+0x14)++0x01
line.word 0x00 "TCD28_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x1380+0x16))&0x8000)==0x8000)
group.word (0x1380+0x16)++0x01
line.word 0x00 "TCD28_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x1380+0x16)++0x01
line.word 0x00 "TCD28_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x1380+0x18)++0x03
line.long 0x00 "TCD28_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x1380+0x1C)++0x01
line.word 0x00 "TCD28_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x1380+0x1E))&0x8000)==0x8000)
group.word (0x1380+0x1E)++0x01
line.word 0x00 "TCD28_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x1380+0x1E)++0x01
line.word 0x00 "TCD28_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD29"
group.long 0x13A0++0x03
line.long 0x00 "TCD29_SADDR,TCD Source Address Register"
group.word (0x13A0+0x04)++0x03
line.word 0x00 "TCD29_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD29_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x13A0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x13A0+0x08)++0x03
line.long 0x00 "TCD29_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x13A0+0x08))&0xC0000000)==0x00)
group.long (0x13A0+0x08)++0x03
line.long 0x00 "TCD29_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x13A0+0x08)++0x03
line.long 0x00 "TCD29_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x13A0+0x0C)++0x07
line.long 0x00 "TCD29_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD29_DADDR,TCD Destination Address Register"
group.word (0x13A0+0x14)++0x01
line.word 0x00 "TCD29_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x13A0+0x16))&0x8000)==0x8000)
group.word (0x13A0+0x16)++0x01
line.word 0x00 "TCD29_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x13A0+0x16)++0x01
line.word 0x00 "TCD29_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x13A0+0x18)++0x03
line.long 0x00 "TCD29_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x13A0+0x1C)++0x01
line.word 0x00 "TCD29_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x13A0+0x1E))&0x8000)==0x8000)
group.word (0x13A0+0x1E)++0x01
line.word 0x00 "TCD29_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x13A0+0x1E)++0x01
line.word 0x00 "TCD29_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD30"
group.long 0x13C0++0x03
line.long 0x00 "TCD30_SADDR,TCD Source Address Register"
group.word (0x13C0+0x04)++0x03
line.word 0x00 "TCD30_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD30_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x13C0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x13C0+0x08)++0x03
line.long 0x00 "TCD30_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x13C0+0x08))&0xC0000000)==0x00)
group.long (0x13C0+0x08)++0x03
line.long 0x00 "TCD30_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x13C0+0x08)++0x03
line.long 0x00 "TCD30_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x13C0+0x0C)++0x07
line.long 0x00 "TCD30_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD30_DADDR,TCD Destination Address Register"
group.word (0x13C0+0x14)++0x01
line.word 0x00 "TCD30_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x13C0+0x16))&0x8000)==0x8000)
group.word (0x13C0+0x16)++0x01
line.word 0x00 "TCD30_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x13C0+0x16)++0x01
line.word 0x00 "TCD30_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x13C0+0x18)++0x03
line.long 0x00 "TCD30_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x13C0+0x1C)++0x01
line.word 0x00 "TCD30_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x13C0+0x1E))&0x8000)==0x8000)
group.word (0x13C0+0x1E)++0x01
line.word 0x00 "TCD30_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x13C0+0x1E)++0x01
line.word 0x00 "TCD30_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree "TCD31"
group.long 0x13E0++0x03
line.long 0x00 "TCD31_SADDR,TCD Source Address Register"
group.word (0x13E0+0x04)++0x03
line.word 0x00 "TCD31_SOFF,TCD Signed Source Address Offset Register"
line.word 0x02 "TCD31_ATTR,TCD Transfer Attributes Register"
bitfld.word 0x02 11.--15. "SMOD,Source address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 8.--10. "SSIZE,Source data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
bitfld.word 0x02 3.--7. "DMOD,Destination address modulo" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "DSIZE,Destination data transfer size" "8-bit,16-bit,32-bit,,16-byte,32-byte,?..."
if (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x13E0+0x08))&0xC0000000)==(0xC0000000||0x80000000||0x40000000))
group.long (0x13E0+0x08)++0x03
line.long 0x00 "TCD31_NBYTES_MLOFFYES,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 10.--29. 0x04 "MLOFF,A sign-extended offset applied to the source or destination address to form the next-state value after the minor loop completes"
hexmask.long.word 0x00 0.--9. 1. "NBYTES,Minor byte transfer count"
elif (((per.l(ad:0x022C0000))&0x80)==0x80)&&(((per.l(ad:0x022C0000+0x13E0+0x08))&0xC0000000)==0x00)
group.long (0x13E0+0x08)++0x03
line.long 0x00 "TCD31_NBYTES_MLOFFNO,TCD Signed Minor Loop Offset Register"
bitfld.long 0x00 31. "SMLOE,Source minor loop offset enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DMLOE,Destination minor loop offset enable" "Disabled,Enabled"
hexmask.long 0x00 0.--29. 1. "NBYTES,Minor byte transfer count"
else
group.long (0x13E0+0x08)++0x03
line.long 0x00 "TCD31_NBYTES_MLNO,TCD Minor Byte Count (Minor Loop Disabled) Register"
endif
group.long (0x13E0+0x0C)++0x07
line.long 0x00 "TCD31_SLAST,TCD Last Source Address Adjustment Register"
line.long 0x04 "TCD31_DADDR,TCD Destination Address Register"
group.word (0x13E0+0x14)++0x01
line.word 0x00 "TCD31_DOFF,TCD Signed Destination Address Offset Register"
if (((per.w(ad:0x022C0000+0x13E0+0x16))&0x8000)==0x8000)
group.word (0x13E0+0x16)++0x01
line.word 0x00 "TCD31_CITER_ELINKYES,TCD Current Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "CITER,Current major iteration count"
else
group.word (0x13E0+0x16)++0x01
line.word 0x00 "TCD31_CITER_ELINKNO,TCD Current Minor Loop Link/Major Loop Count"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "CITER,Current major iteration count"
endif
group.long (0x13E0+0x18)++0x03
line.long 0x00 "TCD31_DLASTSGA,TCD Last Destination Address Adjustment/Scatter Gather Address Register"
group.word (0x13E0+0x1C)++0x01
line.word 0x00 "TCD31_CSR,TCD Control and Status Register"
bitfld.word 0x00 13.--14. "BWC,Bandwidth control" "No eDMA stalls,HPE,4 cycles,8 cycles"
bitfld.word 0x00 8.--12. "MAJORLINKCH,Link channel number" "None channel,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 7. "DONE,Channel done" "Not completed,Completed"
bitfld.word 0x00 6. "ACTIVE,Channel active" "Not active,Active"
newline
bitfld.word 0x00 5. "MAJORELINK,Enable channel-to-channel linking on major loop complete" "Disabled,Enabled"
bitfld.word 0x00 4. "ESG,Enable scatter/gather processing" "Disabled,Enabled"
bitfld.word 0x00 3. "DREQ,Disable request" "No,Yes"
bitfld.word 0x00 2. "INTHALF,Enable an interrupt when major counter is half complete" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "INTMAJOR,Enable an interrupt when major iteration count completes" "Disabled,Enabled"
bitfld.word 0x00 0. "START,Channel start" "Not started,Started"
if (((per.w(ad:0x022C0000+0x13E0+0x1E))&0x8000)==0x8000)
group.word (0x13E0+0x1E)++0x01
line.word 0x00 "TCD31_BITER_ELINKYES,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
bitfld.word 0x00 9.--13. "LINKCH,Link channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.word 0x00 0.--8. 1. "BITER,Starting major iteration count"
else
group.word (0x13E0+0x1E)++0x01
line.word 0x00 "TCD31_BITER_ELINKNO,TCD Beginning Minor Loop Link/Major Loop Count Register"
bitfld.word 0x00 15. "ELINK,Enable channel-to-channel linking on minor-loop complete" "Disabled,Enabled"
hexmask.word 0x00 0.--14. 1. "BITER,Starting major iteration count"
endif
tree.end
tree.end
tree "eSDHC (Enhanced Secured Digital Host Controller)"
tree "eSDHC1"
base ad:0x02140000
group.long 0x00++0x03
line.long 0x00 "DSADDR_BLKATTR2,SDMA System Address Register/Block Attributes 2"
if (per.l(ad:0x02140000+0x0C)&0x02)==0x02
group.long 0x04++0x03
line.long 0x00 "BLKATTR,Block Attributes Register"
hexmask.long.word 0x00 16.--31. 1. "BLKCNT,Blocks count for current transfer"
hexmask.long.word 0x00 0.--11. 1. "BLKSIZE,Transfer block size"
else
group.long 0x04++0x03
line.long 0x00 "BLKATTR,Block Attributes Register"
hexmask.long.word 0x00 0.--11. 1. "BLKSIZE,Transfer block size"
endif
if (per.l(ad:0x02140000+0x24)&0x01)==0x01
rgroup.long 0x08++0x03
line.long 0x00 "CMDARG,Command Argument Register"
else
group.long 0x08++0x03
line.long 0x00 "CMDARG,Command Argument Register"
endif
group.long 0x0C++0x03
line.long 0x00 "XFERTYP,Transfer Type Register"
bitfld.long 0x00 24.--29. "CMDINX,Command index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "CMDTYP,Command Type" "Normal,Suspend CMD52,Resume CMD52,Abort CMD12 CMD52"
bitfld.long 0x00 21. "DPSEL,Data present select" "No data present,Data present"
newline
bitfld.long 0x00 20. "CICEN,Command index check enable" "Disabled,Enabled"
bitfld.long 0x00 19. "CCCEN,Command CRC check enable" "Disabled,Enabled"
bitfld.long 0x00 16.--17. "RSPTYP,Response length type select" "No response,136,48,48-check busy after"
newline
bitfld.long 0x00 5. "MSBSEL,Multi-/single-block select" "Single,Multiple"
bitfld.long 0x00 4. "DTDSEL,Data transfer direction select" "Write (host to card),Read (card to host)"
bitfld.long 0x00 2.--3. "ACEN,Auto CMD12 enable" "Auto CMD disabled,Auto CMD12 enabled,Auto CMD23 enabled,?..."
newline
bitfld.long 0x00 1. "BCEN,Block count enable" "Disabled,Enabled"
bitfld.long 0x00 0. "DMAEN,DMA enable" "Disabled,Enabled"
rgroup.long 0x10++0x0F
line.long 0x00 "CMDRSP0,Command Response 0 Register"
line.long 0x04 "CMDRSP1,Command Response 1 Register"
line.long 0x08 "CMDRSP2,Command Response 2 Register"
line.long 0x0C "CMDRSP3,Command Response 3 Register"
group.long 0x20++0x03
line.long 0x00 "DATPORT,Buffer Data Port Register"
rgroup.long 0x24++0x03
line.long 0x00 "PRSSTAT,Present State Register"
bitfld.long 0x00 31. "DLSL[7],DAT7 line signal level" "0,1"
bitfld.long 0x00 30. "[6],DAT6 line signal level" "0,1"
bitfld.long 0x00 29. "[5],DAT5 line signal level" "0,1"
newline
bitfld.long 0x00 28. "[4],DAT4 line signal level" "0,1"
bitfld.long 0x00 27. "[3],DAT3 line signal level" "0,1"
bitfld.long 0x00 26. "[2],DAT2 line signal level" "0,1"
newline
bitfld.long 0x00 25. "[1],DAT1 line signal level" "0,1"
bitfld.long 0x00 24. "[0],DAT0 line signal level" "0,1"
bitfld.long 0x00 23. "CLSL,CMD line signal level" "0,1"
newline
bitfld.long 0x00 19. "WPS,Write protect state" "Write protected,Write enabled"
bitfld.long 0x00 18. "CDS,Card detect state" "Not present,Present"
bitfld.long 0x00 16. "CINS,Card inserted" "Not inserted,Inserted"
newline
bitfld.long 0x00 11. "BREN,Buffer read enable" "Disabled,Enabled"
bitfld.long 0x00 10. "BWEN,Buffer write enable" "Disabled,Enabled"
bitfld.long 0x00 9. "RTA,Read transfer active" "Inactive,Active"
newline
bitfld.long 0x00 8. "WTA,Write transfer active" "Inactive,Active"
bitfld.long 0x00 7. "SDOFF,SD clock gated off internally" "Active,Gated off"
bitfld.long 0x00 3. "SDSTB,SD clock stable" "Not stable,Stable"
newline
bitfld.long 0x00 2. "DLA,Data line active" "Inactive,Active"
bitfld.long 0x00 1. "CDIHB,Command inhibit (DAT)" "Not inhibited,Inhibited"
bitfld.long 0x00 0. "CIHB,Command inhibit (CMD)" "Not inhibited,Inhibited"
group.long 0x28++0x03
line.long 0x00 "PROCTL,Protocol Control Register"
bitfld.long 0x00 26. "WECRM,Wakeup event enable on SD card removal" "Disabled,Enabled"
bitfld.long 0x00 25. "WECINS,Wakeup event enable on SD card insertion" "Disabled,Enabled"
bitfld.long 0x00 24. "WECINT,Wakeup event enable on card interrupt" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "IABG,Interrupt at block gap" "Disabled,Enabled"
bitfld.long 0x00 18. "RWCTL,Read wait control" "Disabled,Enabled"
bitfld.long 0x00 17. "CREQ,Continue request" "No effect,Restart"
newline
bitfld.long 0x00 16. "SABGREQ,Stop at block gap request" "Transfer,Stop"
bitfld.long 0x00 10. "VOLT_SEL,Voltage selection" "3.0V,1.8V"
bitfld.long 0x00 8.--9. "DMAS,DMA select" "Single DMA,ADMA1,,64-bit ADMA2"
newline
bitfld.long 0x00 7. "CDSS,Card detect signal selection" "SD CD pin,CDTL bit"
bitfld.long 0x00 6. "CDTL,Card detect test level" "Not inserted,Inserted"
bitfld.long 0x00 4.--5. "EMODE,Endian mode" "Big endian,,Little endian,?..."
newline
bitfld.long 0x00 1.--2. "DTW,Data transfer width" "1-bit,4-bit,8-bit,?..."
if (((per.l(ad:0x02140000+0x40C))&0x10000)==0x10000)
group.long 0x2C++0x03
line.long 0x00 "SYSCTL_ESDHCCTL_CRS_1,System Control Register 1"
bitfld.long 0x00 27. "INITA,Initialization active" "Not active,Active"
bitfld.long 0x00 26. "RSTD,Software reset for DAT line" "No reset,Reset"
bitfld.long 0x00 25. "RSTC,Software reset for CMD line" "No reset,Reset"
newline
bitfld.long 0x00 24. "RSTA,Software reset for all" "No reset,Reset"
bitfld.long 0x00 16.--19. "DTOCV,Data timeout counter value" "SDCLK x 2^13,SDCLK x 2^14,SDCLK x 2^15,SDCLK x 2^16,SDCLK x 2^17,SDCLK x 2^18,SDCLK x 2^19,SDCLK x 2^20,SDCLK x 2^21,SDCLK x 2^22,SDCLK x 2^23,SDCLK x 2^24,SDCLK x 2^25,SDCLK x 2^26,SDCLK x 2^27,?..."
hexmask.long.byte 0x00 8.--15. 1. "SDCLKFS,SDCLK frequency select"
newline
bitfld.long 0x00 6.--7. "USDCLKFS,Upper bits of SDCLK frequency select" "0,1,2,3"
bitfld.long 0x00 5. "CGS,10-bit SDCLKFS clock mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "SDCLKEN,SD clock enable" "Disabled,Enabled"
else
group.long 0x2C++0x03
line.long 0x00 "SYSCTL_ESDHCCTL_CRS_0,System Control Register 0"
bitfld.long 0x00 27. "INITA,Initialization active" "Not active,Active"
bitfld.long 0x00 26. "RSTD,Software reset for DAT line" "No reset,Reset"
bitfld.long 0x00 25. "RSTC,Software reset for CMD line" "No reset,Reset"
newline
bitfld.long 0x00 24. "RSTA,Software reset for all" "No reset,Reset"
bitfld.long 0x00 16.--19. "DTOCV,Data timeout counter value" "SDCLK x 2^13,SDCLK x 2^14,SDCLK x 2^15,SDCLK x 2^16,SDCLK x 2^17,SDCLK x 2^18,SDCLK x 2^19,SDCLK x 2^20,SDCLK x 2^21,SDCLK x 2^22,SDCLK x 2^23,SDCLK x 2^24,SDCLK x 2^25,SDCLK x 2^26,SDCLK x 2^27,?..."
hexmask.long.byte 0x00 8.--15. 1. "SDCLKFS,SDCLK frequency select"
newline
bitfld.long 0x00 4.--7. "DVS,Provides more exact divisor to generate desired SD clock frequency" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16"
bitfld.long 0x00 3. "SDCLKEN,SD clock enable" "Disabled,Enabled"
endif
group.long 0x30++0x0F
line.long 0x00 "IRQSTAT,Interrupt Status Register"
eventfld.long 0x00 29. "RTOE,Register access timeout error" "No error,Error"
eventfld.long 0x00 28. "DMAE,DMA error" "No error,Error"
eventfld.long 0x00 26. "TNE,Tuning Error" "No error,Error"
newline
eventfld.long 0x00 25. "ADMAE,ADMA error" "No error,Error"
eventfld.long 0x00 24. "AC12E,Auto CMD12 error" "No error,Error"
eventfld.long 0x00 22. "DEBE,Data end bit error" "No error,Error"
newline
eventfld.long 0x00 21. "DCE,Data CRC error" "No error,Error"
eventfld.long 0x00 20. "DTOE,Data timeout error" "No error,Error"
eventfld.long 0x00 19. "CIE,Command index error" "No error,Error"
newline
eventfld.long 0x00 18. "CEBE,Command end bit error" "No error,Error"
eventfld.long 0x00 17. "CCE,Command CRC error" "No error,Error"
eventfld.long 0x00 16. "CTOE,Command timeout error" "No error,Error"
newline
eventfld.long 0x00 12. "RTE,Re-tuning event" "Not required,Required"
rbitfld.long 0x00 8. "CINT,Card interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 7. "CRM,Card removal" "Inserted or unstable,Removed"
newline
eventfld.long 0x00 6. "CINS,Card insertion" "Removed or unstable,Inserted"
eventfld.long 0x00 5. "BRR,Buffer read ready" "Not ready,Ready"
eventfld.long 0x00 4. "BWR,Buffer write ready" "Not ready,Ready"
newline
eventfld.long 0x00 3. "DINT,DMA interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "BGE,Block gap event" "No block gap,Stopped at block gap"
eventfld.long 0x00 1. "TC,Transfer complete" "Not completed,Completed"
newline
eventfld.long 0x00 0. "CC,Command complete" "Not completed,Completed"
line.long 0x04 "IRQSTATEN,Interrupt Status Enable Register"
bitfld.long 0x04 29. "RTOESEN,Register access timeout status enable" "Disabled,Enabled"
bitfld.long 0x04 28. "DMAESEN,DMA error status enable" "Disabled,Enabled"
bitfld.long 0x04 26. "TNESEN,Tuning error status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 25. "ADMAESEN,ADMA error status enable" "Disabled,Enabled"
bitfld.long 0x04 24. "AC12ESEN,Auto CMD12 error status enable" "Disabled,Enabled"
bitfld.long 0x04 22. "DEBESEN,Data end bit error status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 21. "DCESEN,Data CRC error status enable" "Disabled,Enabled"
bitfld.long 0x04 20. "DTOESEN,Data timeout error status enable" "Disabled,Enabled"
bitfld.long 0x04 19. "CIESEN,Command index error status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 18. "CEBESEN,Command end bit error status enable" "Disabled,Enabled"
bitfld.long 0x04 17. "CCESEN,Command CRC error status enable" "Disabled,Enabled"
bitfld.long 0x04 16. "CTOESEN,Command timeout error status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 12. "RTESEN,Re-tuning event status enable" "Disabled,Enabled"
bitfld.long 0x04 8. "CINTSEN,Card interrupt status enable" "Disabled,Enabled"
bitfld.long 0x04 7. "CRMSEN,Card removal status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 6. "CINSEN,Card insertion status enable" "Disabled,Enabled"
bitfld.long 0x04 5. "BRRSEN,Buffer read ready status enable" "Disabled,Enabled"
bitfld.long 0x04 4. "BWRSEN,Buffer write ready status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 3. "DINTSEN,DMA interrupt status enable" "Disabled,Enabled"
bitfld.long 0x04 2. "BGESEN,Block gap event status enable" "Disabled,Enabled"
bitfld.long 0x04 1. "TCSEN,Transfer complete status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "CCSEN,Command complete status enable" "Disabled,Enabled"
line.long 0x08 "IRQSIGEN,Interrupt Signal Enable Register"
bitfld.long 0x08 29. "RTOEIEN,Register timeout error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 28. "DMAEIEN,DMA error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 26. "TNEIEN,Tuning error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 25. "ADMAEIEN,ADMA error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 24. "AC12EIEN,Auto CMD12 error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 22. "DEBEIEN,Data end bit error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 21. "DCEIEN,Data CRC error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 20. "DTOEIEN,Data timeout error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 19. "CIEIEN,Command index error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 18. "CEBEIEN,Command end bit error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 17. "CCEIEN,Command CRC error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 16. "CTOEIEN,Command timeout error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 12. "RTEIEN,Re-tuning event interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 8. "CINTIEN,Card interrupt interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 7. "CRMIEN,Card removal interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 6. "CINSIEN,Card insertion interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 5. "BRRIEN,Buffer read ready interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 4. "BWRIEN,Buffer write ready interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "DINTIEN,DMA interrupt interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 2. "BGEIEN,Block gap event interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 1. "TCIEN,Transfer complete interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 0. "CCIEN,Command complete interrupt enable" "Disabled,Enabled"
line.long 0x0C "AUTOCERR_SYSCTL2,Auto CMD Error Status Register / System Control 2 Register"
bitfld.long 0x0C 30. "AIE,Asynchronous Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x0C 23. "SMPCLKSEL,Tuning procedure success" "Unsuccessful,Successful"
bitfld.long 0x0C 22. "EXTN,Execute Tuning" "Not executed,Executed"
newline
bitfld.long 0x0C 16.--18. "UHSM,UHS mode select" "SD: SDR12 SD2.0: 52Mhz,SD: SDR25,SD: SDR50,SD: SDR104 MMC: HS200,DDR,?..."
rbitfld.long 0x0C 7. "CNIBAC12E,Command not issued by Auto CMD12 error" "No error,Error"
rbitfld.long 0x0C 4. "AC12IE,Auto CMD index error" "No error,Error"
newline
rbitfld.long 0x0C 3. "AC12EBE,Auto CMD end bit error" "No error,Error"
rbitfld.long 0x0C 2. "AC12CE,Auto CMD CRC error" "No error,Error"
rbitfld.long 0x0C 1. "AC12TOE,Auto CMD timeout error" "No error,Error"
newline
rbitfld.long 0x0C 0. "AC12NE,Auto CMD12 not executed" "Executed,Not executed"
rgroup.long 0x40++0x07
line.long 0x00 "HOSTCAPBLT,Host Controller Capabilities Register"
bitfld.long 0x00 29. "AIS,Asynchronous interrupt support" "Not supported,Supported"
bitfld.long 0x00 28. "SBS64B,64-bit system bus support" "Not supported,Supported"
bitfld.long 0x00 26. "VS18,Voltage support 1.8V" "Not supported,Supported"
newline
bitfld.long 0x00 25. "VS30,Voltage support 3.0V" "Not supported,Supported"
bitfld.long 0x00 24. "VS33,Voltage support 3.3V" "Not supported,Supported"
bitfld.long 0x00 23. "SRS,Suspend/resume support" "Not supported,Supported"
newline
bitfld.long 0x00 22. "DMAS,DMA support" "Not supported,Supported"
bitfld.long 0x00 21. "HSS,High speed support" "Not supported,Supported"
bitfld.long 0x00 20. "ADMAS,ADMA support" "Not supported,Supported"
newline
bitfld.long 0x00 16.--18. "MBL,Maximum block length" "512 bytes,1 KB,2 KB,?..."
line.long 0x04 "WML,Watermark Level Register"
bitfld.long 0x04 24.--27. "WR_BRST_LEN,Max write burst length" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x04 16.--23. 1. "WR_WML,Write watermark level"
bitfld.long 0x04 8.--11. "RD_BRST_LEN,Max read burst length" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.byte 0x04 0.--7. 1. "RD_WML,Read watermark level"
wgroup.long 0x50++0x03
line.long 0x00 "FEVT,Force Event Register"
bitfld.long 0x00 28. "FEVTDMAE,Force event DMA error" "No effect,Force"
bitfld.long 0x00 25. "FEVTADMAE,Force event ADMA error" "No effect,Force"
bitfld.long 0x00 24. "FEVTAC12E,Force event Auto CMD12 error" "No effect,Force"
newline
bitfld.long 0x00 22. "FEVTDEBE,Force event data end bit error" "No effect,Force"
bitfld.long 0x00 21. "FEVTDCE,Force event data CRC error" "No effect,Force"
bitfld.long 0x00 20. "FEVTDTOE,Force event data time out error" "No effect,Force"
newline
bitfld.long 0x00 19. "FEVTCIE,Force event command index error" "No effect,Force"
bitfld.long 0x00 18. "FEVTCEBE,Force event command end bit error" "No effect,Force"
bitfld.long 0x00 17. "FEVTCCE,Force event command CRC error" "No effect,Force"
newline
bitfld.long 0x00 16. "FEVTCTOE,Force event command time out error" "No effect,Force"
bitfld.long 0x00 7. "FEVTCNIBAC12E,Force event command not executed by Auto CMD12 error" "No effect,Force"
bitfld.long 0x00 4. "FEVTAC12IE,Force event Auto CMD12 index error" "No effect,Force"
newline
bitfld.long 0x00 3. "FEVTAC12EBE,Force event Auto CMD12 end bit error" "No effect,Force"
bitfld.long 0x00 2. "FEVTAC12CE,Force event Auto CMD12 CRC error" "No effect,Force"
bitfld.long 0x00 1. "EVTAC12TOE,Force event Auto CMD12 time out error" "No effect,Force"
newline
bitfld.long 0x00 0. "FEVTAC12NE,Force event Auto CMD12 not executed" "No effect,Force"
rgroup.long 0x54++0x03
line.long 0x00 "ADMAES,ADMA Error Status Register"
bitfld.long 0x00 4. "ADMAIBE,ADMA internal bus error" "No error,Error"
bitfld.long 0x00 3. "ADMADCE,ADMA descriptor error" "No error,Error"
bitfld.long 0x00 2. "ADMALME,ADMA length mismatch error" "No error,Error"
newline
bitfld.long 0x00 0.--1. "ADMAES,ADMA Error State" "Idle,Fetch descriptor,Data transfer,Wait for ADMA to stop"
group.long 0x58++0x07
line.long 0x00 "ADSADDRL,ADMA System Address Low Register"
line.long 0x04 "ADSADDRH,ADMA System Address High Register"
rgroup.long 0xFC++0x03
line.long 0x00 "HOSTVER,Host Controller Version Register"
abitfld.long 0x00 8.--15. "VVM,Vendor version number" "0x00=Version 1.0,0x10=Version 2.0,0x11=Version 2.1,0x12=Version 2.2,0x13=Version 2.3,0x20=Version 3.0,0x21=Version 3.1,0x22=Version 3.2"
abitfld.long 0x00 0.--7. "SVN,Specification version number" "0x00=Version 1.0,0x01=Version 2.0,0x02=Version 3.0"
rgroup.long 0x104++0x0B
line.long 0x00 "DMAERRADDRL,DMA Error Address Low Register"
line.long 0x04 "DMAERRADDRH,DMA Error Address High Register"
line.long 0x08 "DMAERRATTR,DMA Error Attribute Register"
bitfld.long 0x08 4.--6. "DMA_SIZE,System bus burst size" "0,1,2,3,4,5,6,7"
bitfld.long 0x08 0.--3. "DMA_LEN,System bus burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x114++0x03
line.long 0x00 "HOSTCAPBLT2,Host Controller Capabilities Register 2"
bitfld.long 0x00 14.--15. "RTM,Re-tuning modes" "Mode 1,Mode 2,Mode 3,?..."
bitfld.long 0x00 13. "UTSDR50,Use tuning for SDR50" "Not supported,Supported"
bitfld.long 0x00 8.--11. "TCRT,Timer Count for Re-Tuning" "Disabled,1s,2s,4s,8s,16s,32s,64s,128s,256s,512s,1024s,,,,Other source"
newline
bitfld.long 0x00 6. "DTDS,Driver type D support" "Not supported,Supported"
bitfld.long 0x00 5. "DTCS,Driver type C support" "Not supported,Supported"
bitfld.long 0x00 4. "DTAS,Driver type A support" "Not supported,Supported"
newline
bitfld.long 0x00 2. "DDR50,DDR50 support" "Not supported,Supported"
bitfld.long 0x00 1. "SDR104,SDR104 Support" "Not supported,Supported"
bitfld.long 0x00 0. "SDR50,SDR50 support" "Not supported,Supported"
group.long 0x120++0x0B
line.long 0x00 "TBCTL,Tuning Block Control Register"
bitfld.long 0x00 6. "HS400_WNDW_ADJUST,HS400 tuning window adjust" "Not shifted,Shifted"
bitfld.long 0x00 5. "SAMPL_CMD_RSP_DQS,Sample command response on DQS" "SD clock,DQS"
bitfld.long 0x00 4. "HS400_MODE,HS400 mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "TB_EN,Tuning block enabled" "Disabled,Enabled"
bitfld.long 0x00 0.--1. "TB_MODE,Tuning Mode" "Mode 1,Mode 2,Mode 3,SW tuning mode"
line.long 0x04 "TBSTAT,Tuning Block Status Register"
line.long 0x08 "TBPTR,Tuning Block Pointer Register"
hexmask.long.byte 0x08 8.--14. 0x01 "TB_WNDW_STRT_PTR,Selects window start pointer for software tuning mode"
hexmask.long.byte 0x08 0.--6. 0x01 "TB_WNDW_END_PTR,Selects window end pointer for software tuning mode"
group.long 0x140++0x0B
line.long 0x00 "SDDIRCTL,SD Direction Control Register"
bitfld.long 0x00 0.--2. "DIR_CTL,Direction control-SD clock periods for turnaround" "Not required,1 SD clk,2 SD clk,3 SD clk,4 SD clk,5 SD clk,6 SD clk,7 SD clk"
line.long 0x04 "SDCLKCTL,SD Clock Control Register"
bitfld.long 0x04 31. "LPBK_CLK_SEL,SD loopback clock select" "Internal,External"
bitfld.long 0x04 30. "LPBK_SD_CLK_DLY_DIR,SD loopback clock delay Direction" "Delayed,Early"
hexmask.long.word 0x04 16.--27. 1. "LPBK_CLK_DLY,SSD loopback clock delay"
newline
bitfld.long 0x04 15. "CMD_CLK_CTL,Command logic clock control" "Same,25% earlier"
line.long 0x08 "SDTIMNGCTL,SD Timing Control Register"
bitfld.long 0x08 15. "FLW_CTL_BG,Flow control at block gap" "Disabled,Enabled"
bitfld.long 0x08 5. "OBE_EARLY,Output buffer enable early" "Disabled,Enabled"
group.long 0x160++0x07
line.long 0x00 "DLLCFG0,DLL Config 0 Register"
bitfld.long 0x00 31. "DLL_ENABLE,DLL enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DLL_RESET,DLL reset" "No reset,Reset"
bitfld.long 0x00 27. "DLL_FREQ_SEL,This field selects between the fast and the slow delay chain for DQS shift" "Slow,Fast"
line.long 0x04 "DLLCFG1,DLL Config 1 Register"
bitfld.long 0x04 31. "DLL_PD_PULSE_STRETCH_SEL,Used to select between a 2 delay cells or 4 delays cells" "4 delay cells,2 delay cells"
rgroup.long 0x170++0x03
line.long 0x00 "DLLSTAT0,DLL Status 0 Register"
bitfld.long 0x00 31. "DLL_STS_REF_LOCK,DLL reference delay line lock status" "0,1"
bitfld.long 0x00 27. "DLL_STS_SLV_LOCK,DLL slave delay chain lock status" "0,1"
hexmask.long.byte 0x00 12.--19. 1. "DLL_STS_REF_SEL,Status of selected tap for reference delay line"
newline
hexmask.long.byte 0x00 0.--7. 1. "DLL_STS_SLV_SEL,Status of selected tap for slave delay line"
group.long 0x40C++0x03
line.long 0x00 "ESDHCCTL,eSDHC Control Register"
bitfld.long 0x00 20.--21. "RTOCV,Register timeout count value" "2^10 clocks,2^11 clocks,2^12 clocks,2^13 clocks"
bitfld.long 0x00 19. "PCS,Peripheral clock select" "Platform,Peripheral/2"
bitfld.long 0x00 18. "FAF,Flush asynchronous FIFO" "No effect,Flush"
newline
rbitfld.long 0x00 17. "RTR,Re-tuning request" "Not requested,Requested"
bitfld.long 0x00 16. "CRS,Clock register select" "8-bit/DVS active,10-bit/CGS active"
bitfld.long 0x00 8.--12. "RD_PRFTCH_BLKCNT,Read prefetch block count" "No prefetch,1 SD block,2 SD blocks,3 SD blocks,4 SD blocks,5 SD blocks,6 SD blocks,7 SD blocks,8 SD blocks,9 SD blocks,10 SD blocks,11 SD blocks,12 SD blocks,13 SD blocks,14 SD blocks,15 SD blocks,16 SD blocks,17 SD blocks,18 SD blocks,19 SD blocks,20 SD blocks,21 SD blocks,22 SD blocks,23 SD blocks,24 SD blocks,25 SD blocks,26 SD blocks,27 SD blocks,28 SD blocks,29 SD blocks,30 SD blocks,31 SD blocks"
newline
bitfld.long 0x00 7. "PAD_DIS,Pad disable" "No,Yes"
bitfld.long 0x00 6. "SNOOP,Snoop attribute" "Not snooped,Snooped"
bitfld.long 0x00 3. "WR_BUF,Write bufferable" "Not bufferable,Bufferable"
newline
bitfld.long 0x00 2. "RD_SAFE,Read safe (to read more bytes that were intended)" "Not safe,Safe"
tree.end
tree "eSDHC2"
base ad:0x02150000
group.long 0x00++0x03
line.long 0x00 "DSADDR_BLKATTR2,SDMA System Address Register/Block Attributes 2"
if (per.l(ad:0x02150000+0x0C)&0x02)==0x02
group.long 0x04++0x03
line.long 0x00 "BLKATTR,Block Attributes Register"
hexmask.long.word 0x00 16.--31. 1. "BLKCNT,Blocks count for current transfer"
hexmask.long.word 0x00 0.--11. 1. "BLKSIZE,Transfer block size"
else
group.long 0x04++0x03
line.long 0x00 "BLKATTR,Block Attributes Register"
hexmask.long.word 0x00 0.--11. 1. "BLKSIZE,Transfer block size"
endif
if (per.l(ad:0x02150000+0x24)&0x01)==0x01
rgroup.long 0x08++0x03
line.long 0x00 "CMDARG,Command Argument Register"
else
group.long 0x08++0x03
line.long 0x00 "CMDARG,Command Argument Register"
endif
group.long 0x0C++0x03
line.long 0x00 "XFERTYP,Transfer Type Register"
bitfld.long 0x00 24.--29. "CMDINX,Command index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 22.--23. "CMDTYP,Command Type" "Normal,Suspend CMD52,Resume CMD52,Abort CMD12 CMD52"
bitfld.long 0x00 21. "DPSEL,Data present select" "No data present,Data present"
newline
bitfld.long 0x00 20. "CICEN,Command index check enable" "Disabled,Enabled"
bitfld.long 0x00 19. "CCCEN,Command CRC check enable" "Disabled,Enabled"
bitfld.long 0x00 16.--17. "RSPTYP,Response length type select" "No response,136,48,48-check busy after"
newline
bitfld.long 0x00 5. "MSBSEL,Multi-/single-block select" "Single,Multiple"
bitfld.long 0x00 4. "DTDSEL,Data transfer direction select" "Write (host to card),Read (card to host)"
bitfld.long 0x00 2.--3. "ACEN,Auto CMD12 enable" "Auto CMD disabled,Auto CMD12 enabled,Auto CMD23 enabled,?..."
newline
bitfld.long 0x00 1. "BCEN,Block count enable" "Disabled,Enabled"
bitfld.long 0x00 0. "DMAEN,DMA enable" "Disabled,Enabled"
rgroup.long 0x10++0x0F
line.long 0x00 "CMDRSP0,Command Response 0 Register"
line.long 0x04 "CMDRSP1,Command Response 1 Register"
line.long 0x08 "CMDRSP2,Command Response 2 Register"
line.long 0x0C "CMDRSP3,Command Response 3 Register"
group.long 0x20++0x03
line.long 0x00 "DATPORT,Buffer Data Port Register"
rgroup.long 0x24++0x03
line.long 0x00 "PRSSTAT,Present State Register"
bitfld.long 0x00 31. "DLSL[7],DAT7 line signal level" "0,1"
bitfld.long 0x00 30. "[6],DAT6 line signal level" "0,1"
bitfld.long 0x00 29. "[5],DAT5 line signal level" "0,1"
newline
bitfld.long 0x00 28. "[4],DAT4 line signal level" "0,1"
bitfld.long 0x00 27. "[3],DAT3 line signal level" "0,1"
bitfld.long 0x00 26. "[2],DAT2 line signal level" "0,1"
newline
bitfld.long 0x00 25. "[1],DAT1 line signal level" "0,1"
bitfld.long 0x00 24. "[0],DAT0 line signal level" "0,1"
bitfld.long 0x00 23. "CLSL,CMD line signal level" "0,1"
newline
bitfld.long 0x00 19. "WPS,Write protect state" "Write protected,Write enabled"
bitfld.long 0x00 18. "CDS,Card detect state" "Not present,Present"
bitfld.long 0x00 16. "CINS,Card inserted" "Not inserted,Inserted"
newline
bitfld.long 0x00 11. "BREN,Buffer read enable" "Disabled,Enabled"
bitfld.long 0x00 10. "BWEN,Buffer write enable" "Disabled,Enabled"
bitfld.long 0x00 9. "RTA,Read transfer active" "Inactive,Active"
newline
bitfld.long 0x00 8. "WTA,Write transfer active" "Inactive,Active"
bitfld.long 0x00 7. "SDOFF,SD clock gated off internally" "Active,Gated off"
bitfld.long 0x00 3. "SDSTB,SD clock stable" "Not stable,Stable"
newline
bitfld.long 0x00 2. "DLA,Data line active" "Inactive,Active"
bitfld.long 0x00 1. "CDIHB,Command inhibit (DAT)" "Not inhibited,Inhibited"
bitfld.long 0x00 0. "CIHB,Command inhibit (CMD)" "Not inhibited,Inhibited"
group.long 0x28++0x03
line.long 0x00 "PROCTL,Protocol Control Register"
bitfld.long 0x00 26. "WECRM,Wakeup event enable on SD card removal" "Disabled,Enabled"
bitfld.long 0x00 25. "WECINS,Wakeup event enable on SD card insertion" "Disabled,Enabled"
bitfld.long 0x00 24. "WECINT,Wakeup event enable on card interrupt" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "IABG,Interrupt at block gap" "Disabled,Enabled"
bitfld.long 0x00 18. "RWCTL,Read wait control" "Disabled,Enabled"
bitfld.long 0x00 17. "CREQ,Continue request" "No effect,Restart"
newline
bitfld.long 0x00 16. "SABGREQ,Stop at block gap request" "Transfer,Stop"
bitfld.long 0x00 10. "VOLT_SEL,Voltage selection" "3.0V,1.8V"
bitfld.long 0x00 8.--9. "DMAS,DMA select" "Single DMA,ADMA1,,64-bit ADMA2"
newline
bitfld.long 0x00 7. "CDSS,Card detect signal selection" "SD CD pin,CDTL bit"
bitfld.long 0x00 6. "CDTL,Card detect test level" "Not inserted,Inserted"
bitfld.long 0x00 4.--5. "EMODE,Endian mode" "Big endian,,Little endian,?..."
newline
bitfld.long 0x00 1.--2. "DTW,Data transfer width" "1-bit,4-bit,8-bit,?..."
if (((per.l(ad:0x02150000+0x40C))&0x10000)==0x10000)
group.long 0x2C++0x03
line.long 0x00 "SYSCTL_ESDHCCTL_CRS_1,System Control Register 1"
bitfld.long 0x00 27. "INITA,Initialization active" "Not active,Active"
bitfld.long 0x00 26. "RSTD,Software reset for DAT line" "No reset,Reset"
bitfld.long 0x00 25. "RSTC,Software reset for CMD line" "No reset,Reset"
newline
bitfld.long 0x00 24. "RSTA,Software reset for all" "No reset,Reset"
bitfld.long 0x00 16.--19. "DTOCV,Data timeout counter value" "SDCLK x 2^13,SDCLK x 2^14,SDCLK x 2^15,SDCLK x 2^16,SDCLK x 2^17,SDCLK x 2^18,SDCLK x 2^19,SDCLK x 2^20,SDCLK x 2^21,SDCLK x 2^22,SDCLK x 2^23,SDCLK x 2^24,SDCLK x 2^25,SDCLK x 2^26,SDCLK x 2^27,?..."
hexmask.long.byte 0x00 8.--15. 1. "SDCLKFS,SDCLK frequency select"
newline
bitfld.long 0x00 6.--7. "USDCLKFS,Upper bits of SDCLK frequency select" "0,1,2,3"
bitfld.long 0x00 5. "CGS,10-bit SDCLKFS clock mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "SDCLKEN,SD clock enable" "Disabled,Enabled"
else
group.long 0x2C++0x03
line.long 0x00 "SYSCTL_ESDHCCTL_CRS_0,System Control Register 0"
bitfld.long 0x00 27. "INITA,Initialization active" "Not active,Active"
bitfld.long 0x00 26. "RSTD,Software reset for DAT line" "No reset,Reset"
bitfld.long 0x00 25. "RSTC,Software reset for CMD line" "No reset,Reset"
newline
bitfld.long 0x00 24. "RSTA,Software reset for all" "No reset,Reset"
bitfld.long 0x00 16.--19. "DTOCV,Data timeout counter value" "SDCLK x 2^13,SDCLK x 2^14,SDCLK x 2^15,SDCLK x 2^16,SDCLK x 2^17,SDCLK x 2^18,SDCLK x 2^19,SDCLK x 2^20,SDCLK x 2^21,SDCLK x 2^22,SDCLK x 2^23,SDCLK x 2^24,SDCLK x 2^25,SDCLK x 2^26,SDCLK x 2^27,?..."
hexmask.long.byte 0x00 8.--15. 1. "SDCLKFS,SDCLK frequency select"
newline
bitfld.long 0x00 4.--7. "DVS,Provides more exact divisor to generate desired SD clock frequency" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16"
bitfld.long 0x00 3. "SDCLKEN,SD clock enable" "Disabled,Enabled"
endif
group.long 0x30++0x0F
line.long 0x00 "IRQSTAT,Interrupt Status Register"
eventfld.long 0x00 29. "RTOE,Register access timeout error" "No error,Error"
eventfld.long 0x00 28. "DMAE,DMA error" "No error,Error"
eventfld.long 0x00 26. "TNE,Tuning Error" "No error,Error"
newline
eventfld.long 0x00 25. "ADMAE,ADMA error" "No error,Error"
eventfld.long 0x00 24. "AC12E,Auto CMD12 error" "No error,Error"
eventfld.long 0x00 22. "DEBE,Data end bit error" "No error,Error"
newline
eventfld.long 0x00 21. "DCE,Data CRC error" "No error,Error"
eventfld.long 0x00 20. "DTOE,Data timeout error" "No error,Error"
eventfld.long 0x00 19. "CIE,Command index error" "No error,Error"
newline
eventfld.long 0x00 18. "CEBE,Command end bit error" "No error,Error"
eventfld.long 0x00 17. "CCE,Command CRC error" "No error,Error"
eventfld.long 0x00 16. "CTOE,Command timeout error" "No error,Error"
newline
eventfld.long 0x00 12. "RTE,Re-tuning event" "Not required,Required"
rbitfld.long 0x00 8. "CINT,Card interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 7. "CRM,Card removal" "Inserted or unstable,Removed"
newline
eventfld.long 0x00 6. "CINS,Card insertion" "Removed or unstable,Inserted"
eventfld.long 0x00 5. "BRR,Buffer read ready" "Not ready,Ready"
eventfld.long 0x00 4. "BWR,Buffer write ready" "Not ready,Ready"
newline
eventfld.long 0x00 3. "DINT,DMA interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "BGE,Block gap event" "No block gap,Stopped at block gap"
eventfld.long 0x00 1. "TC,Transfer complete" "Not completed,Completed"
newline
eventfld.long 0x00 0. "CC,Command complete" "Not completed,Completed"
line.long 0x04 "IRQSTATEN,Interrupt Status Enable Register"
bitfld.long 0x04 29. "RTOESEN,Register access timeout status enable" "Disabled,Enabled"
bitfld.long 0x04 28. "DMAESEN,DMA error status enable" "Disabled,Enabled"
bitfld.long 0x04 26. "TNESEN,Tuning error status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 25. "ADMAESEN,ADMA error status enable" "Disabled,Enabled"
bitfld.long 0x04 24. "AC12ESEN,Auto CMD12 error status enable" "Disabled,Enabled"
bitfld.long 0x04 22. "DEBESEN,Data end bit error status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 21. "DCESEN,Data CRC error status enable" "Disabled,Enabled"
bitfld.long 0x04 20. "DTOESEN,Data timeout error status enable" "Disabled,Enabled"
bitfld.long 0x04 19. "CIESEN,Command index error status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 18. "CEBESEN,Command end bit error status enable" "Disabled,Enabled"
bitfld.long 0x04 17. "CCESEN,Command CRC error status enable" "Disabled,Enabled"
bitfld.long 0x04 16. "CTOESEN,Command timeout error status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 12. "RTESEN,Re-tuning event status enable" "Disabled,Enabled"
bitfld.long 0x04 8. "CINTSEN,Card interrupt status enable" "Disabled,Enabled"
bitfld.long 0x04 7. "CRMSEN,Card removal status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 6. "CINSEN,Card insertion status enable" "Disabled,Enabled"
bitfld.long 0x04 5. "BRRSEN,Buffer read ready status enable" "Disabled,Enabled"
bitfld.long 0x04 4. "BWRSEN,Buffer write ready status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 3. "DINTSEN,DMA interrupt status enable" "Disabled,Enabled"
bitfld.long 0x04 2. "BGESEN,Block gap event status enable" "Disabled,Enabled"
bitfld.long 0x04 1. "TCSEN,Transfer complete status enable" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "CCSEN,Command complete status enable" "Disabled,Enabled"
line.long 0x08 "IRQSIGEN,Interrupt Signal Enable Register"
bitfld.long 0x08 29. "RTOEIEN,Register timeout error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 28. "DMAEIEN,DMA error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 26. "TNEIEN,Tuning error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 25. "ADMAEIEN,ADMA error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 24. "AC12EIEN,Auto CMD12 error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 22. "DEBEIEN,Data end bit error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 21. "DCEIEN,Data CRC error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 20. "DTOEIEN,Data timeout error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 19. "CIEIEN,Command index error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 18. "CEBEIEN,Command end bit error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 17. "CCEIEN,Command CRC error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 16. "CTOEIEN,Command timeout error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 12. "RTEIEN,Re-tuning event interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 8. "CINTIEN,Card interrupt interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 7. "CRMIEN,Card removal interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 6. "CINSIEN,Card insertion interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 5. "BRRIEN,Buffer read ready interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 4. "BWRIEN,Buffer write ready interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "DINTIEN,DMA interrupt interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 2. "BGEIEN,Block gap event interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 1. "TCIEN,Transfer complete interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x08 0. "CCIEN,Command complete interrupt enable" "Disabled,Enabled"
line.long 0x0C "AUTOCERR_SYSCTL2,Auto CMD Error Status Register / System Control 2 Register"
bitfld.long 0x0C 30. "AIE,Asynchronous Interrupt Enable" "Disabled,Enabled"
bitfld.long 0x0C 23. "SMPCLKSEL,Tuning procedure success" "Unsuccessful,Successful"
bitfld.long 0x0C 22. "EXTN,Execute Tuning" "Not executed,Executed"
newline
bitfld.long 0x0C 16.--18. "UHSM,UHS mode select" "SD: SDR12 SD2.0: 52Mhz,SD: SDR25,SD: SDR50,SD: SDR104 MMC: HS200,DDR,?..."
rbitfld.long 0x0C 7. "CNIBAC12E,Command not issued by Auto CMD12 error" "No error,Error"
rbitfld.long 0x0C 4. "AC12IE,Auto CMD index error" "No error,Error"
newline
rbitfld.long 0x0C 3. "AC12EBE,Auto CMD end bit error" "No error,Error"
rbitfld.long 0x0C 2. "AC12CE,Auto CMD CRC error" "No error,Error"
rbitfld.long 0x0C 1. "AC12TOE,Auto CMD timeout error" "No error,Error"
newline
rbitfld.long 0x0C 0. "AC12NE,Auto CMD12 not executed" "Executed,Not executed"
rgroup.long 0x40++0x07
line.long 0x00 "HOSTCAPBLT,Host Controller Capabilities Register"
bitfld.long 0x00 29. "AIS,Asynchronous interrupt support" "Not supported,Supported"
bitfld.long 0x00 28. "SBS64B,64-bit system bus support" "Not supported,Supported"
bitfld.long 0x00 26. "VS18,Voltage support 1.8V" "Not supported,Supported"
newline
bitfld.long 0x00 25. "VS30,Voltage support 3.0V" "Not supported,Supported"
bitfld.long 0x00 24. "VS33,Voltage support 3.3V" "Not supported,Supported"
bitfld.long 0x00 23. "SRS,Suspend/resume support" "Not supported,Supported"
newline
bitfld.long 0x00 22. "DMAS,DMA support" "Not supported,Supported"
bitfld.long 0x00 21. "HSS,High speed support" "Not supported,Supported"
bitfld.long 0x00 20. "ADMAS,ADMA support" "Not supported,Supported"
newline
bitfld.long 0x00 16.--18. "MBL,Maximum block length" "512 bytes,1 KB,2 KB,?..."
line.long 0x04 "WML,Watermark Level Register"
bitfld.long 0x04 24.--27. "WR_BRST_LEN,Max write burst length" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x04 16.--23. 1. "WR_WML,Write watermark level"
bitfld.long 0x04 8.--11. "RD_BRST_LEN,Max read burst length" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.byte 0x04 0.--7. 1. "RD_WML,Read watermark level"
wgroup.long 0x50++0x03
line.long 0x00 "FEVT,Force Event Register"
bitfld.long 0x00 28. "FEVTDMAE,Force event DMA error" "No effect,Force"
bitfld.long 0x00 25. "FEVTADMAE,Force event ADMA error" "No effect,Force"
bitfld.long 0x00 24. "FEVTAC12E,Force event Auto CMD12 error" "No effect,Force"
newline
bitfld.long 0x00 22. "FEVTDEBE,Force event data end bit error" "No effect,Force"
bitfld.long 0x00 21. "FEVTDCE,Force event data CRC error" "No effect,Force"
bitfld.long 0x00 20. "FEVTDTOE,Force event data time out error" "No effect,Force"
newline
bitfld.long 0x00 19. "FEVTCIE,Force event command index error" "No effect,Force"
bitfld.long 0x00 18. "FEVTCEBE,Force event command end bit error" "No effect,Force"
bitfld.long 0x00 17. "FEVTCCE,Force event command CRC error" "No effect,Force"
newline
bitfld.long 0x00 16. "FEVTCTOE,Force event command time out error" "No effect,Force"
bitfld.long 0x00 7. "FEVTCNIBAC12E,Force event command not executed by Auto CMD12 error" "No effect,Force"
bitfld.long 0x00 4. "FEVTAC12IE,Force event Auto CMD12 index error" "No effect,Force"
newline
bitfld.long 0x00 3. "FEVTAC12EBE,Force event Auto CMD12 end bit error" "No effect,Force"
bitfld.long 0x00 2. "FEVTAC12CE,Force event Auto CMD12 CRC error" "No effect,Force"
bitfld.long 0x00 1. "EVTAC12TOE,Force event Auto CMD12 time out error" "No effect,Force"
newline
bitfld.long 0x00 0. "FEVTAC12NE,Force event Auto CMD12 not executed" "No effect,Force"
rgroup.long 0x54++0x03
line.long 0x00 "ADMAES,ADMA Error Status Register"
bitfld.long 0x00 4. "ADMAIBE,ADMA internal bus error" "No error,Error"
bitfld.long 0x00 3. "ADMADCE,ADMA descriptor error" "No error,Error"
bitfld.long 0x00 2. "ADMALME,ADMA length mismatch error" "No error,Error"
newline
bitfld.long 0x00 0.--1. "ADMAES,ADMA Error State" "Idle,Fetch descriptor,Data transfer,Wait for ADMA to stop"
group.long 0x58++0x07
line.long 0x00 "ADSADDRL,ADMA System Address Low Register"
line.long 0x04 "ADSADDRH,ADMA System Address High Register"
rgroup.long 0xFC++0x03
line.long 0x00 "HOSTVER,Host Controller Version Register"
abitfld.long 0x00 8.--15. "VVM,Vendor version number" "0x00=Version 1.0,0x10=Version 2.0,0x11=Version 2.1,0x12=Version 2.2,0x13=Version 2.3,0x20=Version 3.0,0x21=Version 3.1,0x22=Version 3.2"
abitfld.long 0x00 0.--7. "SVN,Specification version number" "0x00=Version 1.0,0x01=Version 2.0,0x02=Version 3.0"
rgroup.long 0x104++0x0B
line.long 0x00 "DMAERRADDRL,DMA Error Address Low Register"
line.long 0x04 "DMAERRADDRH,DMA Error Address High Register"
line.long 0x08 "DMAERRATTR,DMA Error Attribute Register"
bitfld.long 0x08 4.--6. "DMA_SIZE,System bus burst size" "0,1,2,3,4,5,6,7"
bitfld.long 0x08 0.--3. "DMA_LEN,System bus burst length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x114++0x03
line.long 0x00 "HOSTCAPBLT2,Host Controller Capabilities Register 2"
bitfld.long 0x00 14.--15. "RTM,Re-tuning modes" "Mode 1,Mode 2,Mode 3,?..."
bitfld.long 0x00 13. "UTSDR50,Use tuning for SDR50" "Not supported,Supported"
bitfld.long 0x00 8.--11. "TCRT,Timer Count for Re-Tuning" "Disabled,1s,2s,4s,8s,16s,32s,64s,128s,256s,512s,1024s,,,,Other source"
newline
bitfld.long 0x00 6. "DTDS,Driver type D support" "Not supported,Supported"
bitfld.long 0x00 5. "DTCS,Driver type C support" "Not supported,Supported"
bitfld.long 0x00 4. "DTAS,Driver type A support" "Not supported,Supported"
newline
bitfld.long 0x00 2. "DDR50,DDR50 support" "Not supported,Supported"
bitfld.long 0x00 1. "SDR104,SDR104 Support" "Not supported,Supported"
bitfld.long 0x00 0. "SDR50,SDR50 support" "Not supported,Supported"
group.long 0x120++0x0B
line.long 0x00 "TBCTL,Tuning Block Control Register"
bitfld.long 0x00 6. "HS400_WNDW_ADJUST,HS400 tuning window adjust" "Not shifted,Shifted"
bitfld.long 0x00 5. "SAMPL_CMD_RSP_DQS,Sample command response on DQS" "SD clock,DQS"
bitfld.long 0x00 4. "HS400_MODE,HS400 mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "TB_EN,Tuning block enabled" "Disabled,Enabled"
bitfld.long 0x00 0.--1. "TB_MODE,Tuning Mode" "Mode 1,Mode 2,Mode 3,SW tuning mode"
line.long 0x04 "TBSTAT,Tuning Block Status Register"
line.long 0x08 "TBPTR,Tuning Block Pointer Register"
hexmask.long.byte 0x08 8.--14. 0x01 "TB_WNDW_STRT_PTR,Selects window start pointer for software tuning mode"
hexmask.long.byte 0x08 0.--6. 0x01 "TB_WNDW_END_PTR,Selects window end pointer for software tuning mode"
group.long 0x140++0x0B
line.long 0x00 "SDDIRCTL,SD Direction Control Register"
bitfld.long 0x00 0.--2. "DIR_CTL,Direction control-SD clock periods for turnaround" "Not required,1 SD clk,2 SD clk,3 SD clk,4 SD clk,5 SD clk,6 SD clk,7 SD clk"
line.long 0x04 "SDCLKCTL,SD Clock Control Register"
bitfld.long 0x04 31. "LPBK_CLK_SEL,SD loopback clock select" "Internal,External"
bitfld.long 0x04 30. "LPBK_SD_CLK_DLY_DIR,SD loopback clock delay Direction" "Delayed,Early"
hexmask.long.word 0x04 16.--27. 1. "LPBK_CLK_DLY,SSD loopback clock delay"
newline
bitfld.long 0x04 15. "CMD_CLK_CTL,Command logic clock control" "Same,25% earlier"
line.long 0x08 "SDTIMNGCTL,SD Timing Control Register"
bitfld.long 0x08 15. "FLW_CTL_BG,Flow control at block gap" "Disabled,Enabled"
bitfld.long 0x08 5. "OBE_EARLY,Output buffer enable early" "Disabled,Enabled"
group.long 0x160++0x07
line.long 0x00 "DLLCFG0,DLL Config 0 Register"
bitfld.long 0x00 31. "DLL_ENABLE,DLL enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DLL_RESET,DLL reset" "No reset,Reset"
bitfld.long 0x00 27. "DLL_FREQ_SEL,This field selects between the fast and the slow delay chain for DQS shift" "Slow,Fast"
line.long 0x04 "DLLCFG1,DLL Config 1 Register"
bitfld.long 0x04 31. "DLL_PD_PULSE_STRETCH_SEL,Used to select between a 2 delay cells or 4 delays cells" "4 delay cells,2 delay cells"
rgroup.long 0x170++0x03
line.long 0x00 "DLLSTAT0,DLL Status 0 Register"
bitfld.long 0x00 31. "DLL_STS_REF_LOCK,DLL reference delay line lock status" "0,1"
bitfld.long 0x00 27. "DLL_STS_SLV_LOCK,DLL slave delay chain lock status" "0,1"
hexmask.long.byte 0x00 12.--19. 1. "DLL_STS_REF_SEL,Status of selected tap for reference delay line"
newline
hexmask.long.byte 0x00 0.--7. 1. "DLL_STS_SLV_SEL,Status of selected tap for slave delay line"
group.long 0x40C++0x03
line.long 0x00 "ESDHCCTL,eSDHC Control Register"
bitfld.long 0x00 20.--21. "RTOCV,Register timeout count value" "2^10 clocks,2^11 clocks,2^12 clocks,2^13 clocks"
bitfld.long 0x00 19. "PCS,Peripheral clock select" "Platform,Peripheral/2"
bitfld.long 0x00 18. "FAF,Flush asynchronous FIFO" "No effect,Flush"
newline
rbitfld.long 0x00 17. "RTR,Re-tuning request" "Not requested,Requested"
bitfld.long 0x00 16. "CRS,Clock register select" "8-bit/DVS active,10-bit/CGS active"
bitfld.long 0x00 8.--12. "RD_PRFTCH_BLKCNT,Read prefetch block count" "No prefetch,1 SD block,2 SD blocks,3 SD blocks,4 SD blocks,5 SD blocks,6 SD blocks,7 SD blocks,8 SD blocks,9 SD blocks,10 SD blocks,11 SD blocks,12 SD blocks,13 SD blocks,14 SD blocks,15 SD blocks,16 SD blocks,17 SD blocks,18 SD blocks,19 SD blocks,20 SD blocks,21 SD blocks,22 SD blocks,23 SD blocks,24 SD blocks,25 SD blocks,26 SD blocks,27 SD blocks,28 SD blocks,29 SD blocks,30 SD blocks,31 SD blocks"
newline
bitfld.long 0x00 7. "PAD_DIS,Pad disable" "No,Yes"
bitfld.long 0x00 6. "SNOOP,Snoop attribute" "Not snooped,Snooped"
bitfld.long 0x00 3. "WR_BUF,Write bufferable" "Not bufferable,Bufferable"
newline
bitfld.long 0x00 2. "RD_SAFE,Read safe (to read more bytes that were intended)" "Not safe,Safe"
tree.end
tree.end
tree "Ethernet Subsystem"
tree "IEPRC (Integrated Endpoint Root Complex)"
tree "PCI Express ECAM Event Collector Config Registers"
base ad:0x1F00F8000
rgroup.long 0x00++0x03
line.long 0x00 "PCI_CFH_DID_VID,PCI Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
group.word 0x04++0x01
line.word 0x00 "PCI_CFH_CMD,PCI Command Register"
bitfld.word 0x00 10. "INTR_DISABLE,Interrupt disable" "No,Yes"
rgroup.word 0x06++0x01
line.word 0x00 "PCI_CFH_STAT,PCI Status Register"
bitfld.word 0x00 4. "CAP_LIST,Extended Capability list item presence" "Not present,Present"
bitfld.word 0x00 3. "INTR_STATUS,Interrupt is pending for the Event Collector" "Not pending,Pending"
rgroup.long 0x08++0x03
line.long 0x00 "PCI_CFH_REVID_CLASSCODE,PCI Revision ID and Classcode Register"
hexmask.long.tbyte 0x00 8.--31. 1. "CLASS_CODE,Class code is used to identify the generic function of the device in some cases"
hexmask.long.byte 0x00 0.--7. 1. "REV_ID,Specifies a device specific revision identifier"
group.byte 0x0C++0x00
line.byte 0x00 "PCI_CFH_CL_SIZE,PCI Cache Line Size Register"
rgroup.byte 0x0E++0x00
line.byte 0x00 "PCI_CFH_HDR_TYPE,PCI Header Type Register"
bitfld.byte 0x00 7. "MULT_FUNC_DEV,Multi-function device" "0,1"
hexmask.byte 0x00 0.--6. 1. "HDR_TYPE,Header type"
rgroup.word 0x2C++0x03
line.word 0x00 "PCI_CFH_SUBSYS_VID,PCI Subsystem Vendor ID Register"
line.word 0x02 "PCI_CFH_SUBSYS_ID,PCI Subsystem ID Register"
rgroup.byte 0x34++0x00
line.byte 0x00 "PCI_CFH_CAP_PTR,PCI Capabilities Pointer Register"
group.byte 0x3C++0x00
line.byte 0x00 "PCI_CFH_INT_LINE,PCI Interrupt Line Register"
rgroup.byte 0x3D++0x00
line.byte 0x00 "PCI_CFH_INT_PIN,PCI Interrupt Pin Register"
rgroup.word 0x40++0x03
line.word 0x00 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI express capability structure"
line.word 0x02 "PCI_CFC_PCIE_CAP,PCI PCIe Capabilities Register"
bitfld.word 0x02 9.--13. "INT_MSG_NUM,Interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 4.--7. "DEV_PORT_TYPE,Device/port type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.word.byte 0x02 0.--3. 1. "CAP_VER,Capability version"
rgroup.long 0x44++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe Device Capabilities Register"
bitfld.long 0x00 28. "FLR_CAP,Function level reset capability" "Not supported,Supported"
rgroup.word 0x4A++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe Device Status Register"
bitfld.word 0x00 5. "TRANS_PEND,Transaction pending" "Finished,Pending"
group.word 0x5C++0x01
line.word 0x00 "PCI_CFC_PCIE_ROOT_CTL,PCI PCIe Root Control Register"
bitfld.word 0x00 3. "PME_INT_EN,Enable PME interrupt generation upon receipt of a PME Message as reflected in the PME Status bit" "Disabled,Enabled"
group.long 0x60++0x03
line.long 0x00 "PCI_CFC_PCIE_ROOT_STAT,PCI PCIe Root Status Register"
rbitfld.long 0x00 17. "PME_PEND,PME pending" "Not pending,Pending"
eventfld.long 0x00 16. "PME_STATUS,Indicates that PME was asserted by the PME Requester indicated in the ID field" "Not effect,Clear"
newline
rhexmask.long.word 0x00 0.--15. 1. "PME_REQ_ID,PME requester ID of the last PME Requester"
rgroup.word 0x80++0x03
line.word 0x00 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,MSI-X capability structure"
line.word 0x02 "PCI_CFC_PCIPM_CAP,PCI PCI-PM Capabilities Register"
bitfld.word 0x02 11.--15. "PME_SUPPORT,PME support" "Not supported,Supported,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 0.--2. "VERSION,RCEC complies with the PCI PM specification" "0,1,2,3,4,5,6,7"
group.word 0x84++0x01
line.word 0x00 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM Control and Status Register"
bitfld.word 0x00 3. "NO_SOFT_RST,Soft reset during transition from D3hot to D0active disable" "No,Yes"
bitfld.word 0x00 0.--1. "PWR_STATE,Power state" "D0,D1,D2,D3"
rgroup.long 0x100++0x03
line.long 0x00 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER Extended Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
newline
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
group.long 0x12C++0x07
line.long 0x00 "PCIE_CFC_AER_ROOT_ERR_CMD,PCIe AER Root Error Command Register"
bitfld.long 0x00 2. "FATAL_ERR_RPT_EN,Fatal error reporting enable" "Disabled,Enabled"
bitfld.long 0x00 1. "NON_FATAL_ERR_RPT_EN,Non-fatal error reporting enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "CORR_ERR_RPT_EN,Correctable error reporting enable" "Disabled,Enabled"
line.long 0x04 "PCIE_CFC_AER_ROOT_ERR_STAT,PCIe AER Root Error Status Register"
eventfld.long 0x04 6. "ERR_FATAL,Fatal error received" "No error,Error"
eventfld.long 0x04 5. "ERR_NON_FATAL,Non-fatal error received" "No error,Error"
newline
eventfld.long 0x04 4. "FIRST_UCORR_FATAL,First uncorrectable error fatal" "No error,Error"
eventfld.long 0x04 3. "MULT_ERR_FATAL_NON_FATAL,Multiple fatal/non-fatal errors received" "Not occurred,Occurred"
newline
eventfld.long 0x04 2. "ERR_FATAL_NON_FATAL,Fatal/non-fatal error received" "No error,Error"
eventfld.long 0x04 1. "MULT_ERR_CORR,Multiple correctable errors received" "Not occurred,Occurred"
newline
eventfld.long 0x04 0. "ERR_CORR,Correctable error received" "No error,Error"
rgroup.long 0x134++0x0B
line.long 0x00 "PCIE_CFC_AER_ERR_SRC_ID,PCIe AER Error Source Identification Register"
hexmask.long.word 0x00 16.--31. 0x01 "ERR_FATAL_NON_FATAL_SRC_ID,ERR_FATAL_NON_FATAL Source Identification"
hexmask.long.word 0x00 0.--15. 0x01 "ERR_CORR_SRC_ID,ERR_CORR Source Identification"
line.long 0x04 "PCIE_CFC_RCEC_EPA_EXT_CAP_HDR,PCIe RCEC Endpoint Association Extended Capability Header"
hexmask.long.word 0x04 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
bitfld.long 0x04 16.--19. "CAP_VER,Capability version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x04 0.--15. 0x01 "PCIE_EXT_CAP_ID,The extended capability ID for the Event Collector"
line.long 0x08 "PCIE_CFC_RCEC_EPA_BITMAP,PCIe RCEC Endpoint Association Bitmap Register"
tree.end
tree "ECIERB (Event Collector Integrated Endpoint Register Block)"
base ad:0x1F09F0000
group.long 0x00++0x07
line.long 0x00 "F0_EC_CFH_DIDVID,EC Config Header Device ID and Vendor ID Register"
hexmask.long.word 0x00 16.--31. 0x01 "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
line.long 0x04 "F0_EC_CFH_SIDSVID,EC Config Header Subsystem ID and Subsystem Vendor ID Register"
hexmask.long.word 0x04 16.--31. 0x01 "SUBSYSTEM_DEVICE_ID,Device ID"
hexmask.long.word 0x04 0.--15. 1. "SUBSYSTEM_VENDOR_ID,Vendor ID"
tree.end
tree.end
tree "ENETC (Ethernet Controller)"
tree "PCI Express ECAM PF Config Registers"
tree "PF0_PCI_HDR_TYPE0"
base ad:0x1F0000000
rgroup.long 0x00++0x03
line.long 0x00 "PCI_CFH_DID_VID,PCI Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
group.word 0x04++0x01
line.word 0x00 "PCI_CFH_CMD,PCI Command Register"
bitfld.word 0x00 10. "INTR_DISABLE,Interrupt disable" "No,Yes"
bitfld.word 0x00 2. "BUS_MASTER_EN,Bus master enable" "Disabled,Enabled"
bitfld.word 0x00 1. "MEM_ACCESS,Memory access enable" "Disabled,Enabled"
rgroup.word 0x06++0x01
line.word 0x00 "PCI_CFH_STAT,PCI Status Register"
bitfld.word 0x00 4. "CAP_LIST,Extended Capability list item presence" "Not present,Present"
rgroup.long 0x08++0x03
line.long 0x00 "PCI_CFH_REVID_CLASSCODE,PCI Revision ID and Classcode Register"
hexmask.long.tbyte 0x00 8.--31. 1. "CLASS_CODE,Class code is used to identify the generic function of the device in some cases"
hexmask.long.byte 0x00 0.--7. 1. "REV_ID,Specifies a device specific revision identifier"
group.byte 0x0C++0x00
line.byte 0x00 "PCI_CFH_CL_SIZE,PCI Cache Line Size Register"
rgroup.byte 0x0E++0x00
line.byte 0x00 "PCI_CFH_HDR_TYPE,PCI Header Type Register"
bitfld.byte 0x00 7. "MULT_FUNC_DEV,Multi-function device" "0,1"
hexmask.byte 0x00 0.--6. 1. "HDR_TYPE,Header type"
repeat 6. (increment 0x10 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFH_BAR$2,PCI Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.word 0x2C++0x03
line.word 0x00 "PCI_CFH_SUBSYS_VID,PCI Subsystem Vendor ID Register"
line.word 0x02 "PCI_CFH_SUBSYS_ID,PCI Subsystem ID Register"
rgroup.byte 0x34++0x00
line.byte 0x00 "PCI_CFH_CAP_PTR,PCI Capabilities Pointer Register"
rgroup.word 0x40++0x03
line.word 0x00 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI express capability structure"
line.word 0x02 "PCI_CFC_PCIE_CAP,PCI PCIe Capabilities Register"
bitfld.word 0x02 9.--13. "INT_MSG_NUM,Interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 4.--7. "DEV_PORT_TYPE,Device/port type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.word.byte 0x02 0.--3. 1. "CAP_VER,Capability version"
rgroup.long 0x44++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe Device Capabilities Register"
bitfld.long 0x00 28. "FLR_CAP,Function level reset capability" "Not supported,Supported"
wgroup.word 0x48++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe Device Control Register"
bitfld.word 0x00 15. "INIT_FLR,Initiate function level reset" "Not initiated,Initiated"
rgroup.word 0x4A++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe Device Status Register"
bitfld.word 0x00 5. "TRANS_PEND,Transaction pending" "Finished,Pending"
rgroup.long 0x64++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe Device Capabilities 2 Register"
bitfld.long 0x00 4. "CMPL_TO_DIS_SUPP,Completion timeout disable supported" "Not supported,Supported"
bitfld.long 0x00 0.--3. "CMPL_TO_RNG_SUPP,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x68++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe Device Control 2 Register"
bitfld.word 0x00 4. "CMPL_TO_EN,Completion timeout enable" "Disabled,Enabled"
bitfld.word 0x00 0.--3. "CMPL_TO_VALUE,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x80++0x01
line.word 0x00 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,MSI-X capability structure"
group.word 0x82++0x01
line.word 0x00 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X Message Control Register"
bitfld.word 0x00 15. "MSIX_EN,MSI-X enable" "Disabled,Enabled"
bitfld.word 0x00 14. "FUNC_MASK,Function mask" "Not masked,Masked"
hexmask.word 0x00 0.--10. 1. "TABLE_SIZE,Table size"
rgroup.long 0x84++0x07
line.long 0x00 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X Table Offset/BIR Register"
hexmask.long 0x00 3.--31. 0x08 "TABLE_OFFSET,Table offset"
bitfld.long 0x00 0.--2. "TABLE_BIR,Table BIR" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA Offset/BIR Register"
hexmask.long 0x04 3.--31. 0x08 "PBA_OFFSET,PBA offset"
bitfld.long 0x04 0.--2. "PBA_BIR,PBA BIR" "0,1,2,3,4,5,6,7"
rgroup.word 0x90++0x03
line.word 0x00 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI-PM capability structure"
line.word 0x02 "PCI_CFC_PCIPM_CAP,PCI PCI-PM Capabilities Register"
bitfld.word 0x02 15. "PME_SUPPORT[4],PME support for D3 cold state" "Not supported,Supported"
bitfld.word 0x02 14. "[3],PME support for D3 hot state" "Not supported,Supported"
bitfld.word 0x02 13. "[2],PME support for D2 state" "Not supported,Supported"
newline
bitfld.word 0x02 12. "[1],PME support for D1 state" "Not supported,Supported"
bitfld.word 0x02 11. "[0],PME support for D0 state" "Not supported,Supported"
hexmask.word.byte 0x02 0.--2. 1. "VERSION,Version"
group.word 0x94++0x01
line.word 0x00 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM Control And Status Register"
rbitfld.word 0x00 3. "NO_SOFT_RST,Soft reset during transition from D3hot to D0active disable" "No,Yes"
bitfld.word 0x00 0.--1. "PWR_STATE,Power state" "D0,D1,D2,D3"
rgroup.word 0x9C++0x03
line.word 0x00 "PCI_CFC_EA_CAP_LIST,PCI EA Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,Enhanced allocation (EA) capability structure"
line.word 0x02 "PCI_CFC_EA_CAP,PCI EA Capabilities Register"
bitfld.word 0x02 0.--5. "NUM_ENTRIES,Number of entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0xA0++0x0B
line.long 0x00 "PCI_CFC_EA_PE0_FMT,PCI EA Per-Entry 0 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE0_BASE,PCI EA Per-Entry 0 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE0_MAXOFF,PCI EA Per-Entry 0 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
repeat 4. (increment 0xAC 0x10)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFC_EA_PE$2_EXT_BASE,PCI EA Per-Entry $2 Extended Base Register"
repeat.end
rgroup.long 0xB0++0x0B
line.long 0x00 "PCI_CFC_EA_PE1_FMT,PCI EA Per-Entry 1 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE1_BASE,PCI EA Per-Entry 1 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE1_MAXOFF,PCI EA Per-Entry 1 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0xC0++0x0B
line.long 0x00 "PCI_CFC_EA_PE2_FMT,PCI EA Per-Entry 2 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE2_BASE,PCI EA Per-Entry 2 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE2_MAXOFF,PCI EA Per-Entry 2 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0xD0++0x0B
line.long 0x00 "PCI_CFC_EA_PE3_FMT,PCI EA Per-Entry 3 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE3_BASE,PCI EA Per-Entry 3 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE3_MAXOFF,PCI EA Per-Entry 3 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0x100++0x03
line.long 0x00 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER Extended Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
group.long 0x104++0x0B
line.long 0x00 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER Uncorrectable Error Status Register"
eventfld.long 0x00 22. "UCORR_INT_ERR,Uncorrectable internal error" "No error,Error"
eventfld.long 0x00 21. "ACS_VIOLATION_STAT,ACS violation status" "Not occurred,Occurred"
line.long 0x04 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER Uncorrectable Error Mask Register"
bitfld.long 0x04 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask" "Not masked,Masked"
line.long 0x08 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER Uncorrectable Error Severity Register"
bitfld.long 0x08 22. "UCORR_INT_SEV,Uncorrectable internal severity" "Non-fatal,Fatal"
group.long 0x110++0x07
line.long 0x00 "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER Correctable Error Status Register"
eventfld.long 0x00 14. "CORR_INT_ERR,Correctable internal error" "No error,Error"
line.long 0x04 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER Correctable Error Mask Register"
bitfld.long 0x04 14. "CORR_INT_MASK,Correctable internal error mask" "Not masked,Masked"
rgroup.long 0x118++0x03
line.long 0x00 "PCIE_CFC_AER_CAP_CTL,PCIe AER Capabilities And Control Register"
bitfld.long 0x00 0.--4. "FIRST_ERR_PTR,First error pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x130++0x03
line.long 0x00 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
rgroup.word 0x134++0x03
line.word 0x00 "PCIE_CFC_ACS_CAP,PCIe ACS Capability Register"
bitfld.word 0x00 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T)" "Not supported,Supported"
bitfld.word 0x00 2. "ACS_P2P_REQ_REDIR,ACS P2P request redirect (R)" "Not supported,Supported"
bitfld.word 0x00 1. "ACS_TRANS_BLOCK,ACS translation blocking (B)" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_ACS_CTL,PCIe ACS Control Register"
bitfld.word 0x02 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T)" "Disabled,Enabled"
bitfld.word 0x02 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request redirect enable (R)" "Disabled,Enabled"
bitfld.word 0x02 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B)" "Disabled,Enabled"
rgroup.long 0x140++0x07
line.long 0x00 "PCIE_CFC_SRIOV_CAP_HDR,PCIe SR-IOV Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
line.long 0x04 "PCIE_CFC_SRIOV_CAP,PCIe SR_IOV Capability Register"
hexmask.long.word 0x04 21.--31. 1. "VF_MIGRATION_ING_MSG_NUM,VF migration interrupt message number"
bitfld.long 0x04 1. "ARI_CAP_HIER_PRSV,ARI capable hierarchy preserved" "0,1"
bitfld.long 0x04 0. "VF_MIGRATION_CAP,VF migration capable" "Not capable,Capable"
group.word 0x148++0x01
line.word 0x00 "PCIE_CFC_SRIOV_CTL,PCIe SR-IOV Control Register"
rbitfld.word 0x00 11.--15. "PME_SUPPORT,PME support" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rbitfld.word 0x00 10. "D2_SUPPORT,PCI-PM D2 support" "Not supported,Supported"
rbitfld.word 0x00 4. "ARI_CAP_HIERARCHY,ARI capable hierarchy" "0,1"
newline
bitfld.word 0x00 3. "VF_MSE,Memory space for virtual functions enable" "Disabled,Enabled"
rbitfld.word 0x00 2. "VF_MIGRATION_INT_ENABLE,VF migration interrupt enable" "Disabled,Enabled"
rbitfld.word 0x00 1. "VF_MIGRATION_ENABLE,VF migration enable" "Disabled,Enabled"
newline
bitfld.word 0x00 0. "VF_ENABLE,VF enable" "Disabled,Enabled"
rgroup.word 0x14A++0x05
line.word 0x00 "PCIE_CFC_SRIOV_STAT,PCIe SR-IOV Status Register"
bitfld.word 0x00 0. "VF_MIGRATION_STATUS,VF migration status" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_SRIOV_INIT_VFS,PCIe SR-IOV Initial VFs Register"
line.word 0x04 "PCIE_CFC_SRIOV_TOTAL_VFS,PCIe SR-IOV Total VFs Register"
group.word 0x150++0x01
line.word 0x00 "PCIE_CFC_SRIOV_NUM_VFS,PCIe SR-IOV Num VFs Register"
rgroup.word 0x152++0x05
line.word 0x00 "PCIE_CFC_SRIOV_FUNC_DEP_LIST,PCIe SR-IOV Function Dependency List Register"
line.word 0x02 "PCIE_CFC_SRIOV_FIRST_VF_OFF,PCIe SR-IOV First VF Offset Register"
line.word 0x04 "PCIE_CFC_SRIOV_VF_STRIDE,PCIe SR-IOV VF Stride Register"
rgroup.word 0x15A++0x01
line.word 0x00 "PCIE_CFC_SRIOV_VF_DEV_ID,PCIe SR-IOV VF Device ID Register"
rgroup.long 0x15C++0x07
line.long 0x00 "PCIE_CFC_SRIOV_SUP_PAGE_SIZES,PCIe SR-IOV Supported Page Sizes ID Register"
line.long 0x04 "PCIE_CFC_SRIOV_SYS_PAGE_SIZE,PCIe SR-IOV System Page Size ID Register"
repeat 6. (increment 0x164 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCIE_CFC_VF_BAR$2,PCIe SR-IOV VF Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address space"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.long 0x17C++0x03
line.long 0x00 "PCIE_CFC_SRIOV_VF_MIG_STATE_ARR_OFF,PCIe SR-IOV VF Migration State Array Offset Register"
tree.end
tree "PF1_PCI_HDR_TYPE0"
base ad:0x1F0001000
rgroup.long 0x00++0x03
line.long 0x00 "PCI_CFH_DID_VID,PCI Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
group.word 0x04++0x01
line.word 0x00 "PCI_CFH_CMD,PCI Command Register"
bitfld.word 0x00 10. "INTR_DISABLE,Interrupt disable" "No,Yes"
bitfld.word 0x00 2. "BUS_MASTER_EN,Bus master enable" "Disabled,Enabled"
bitfld.word 0x00 1. "MEM_ACCESS,Memory access enable" "Disabled,Enabled"
rgroup.word 0x06++0x01
line.word 0x00 "PCI_CFH_STAT,PCI Status Register"
bitfld.word 0x00 4. "CAP_LIST,Extended Capability list item presence" "Not present,Present"
rgroup.long 0x08++0x03
line.long 0x00 "PCI_CFH_REVID_CLASSCODE,PCI Revision ID and Classcode Register"
hexmask.long.tbyte 0x00 8.--31. 1. "CLASS_CODE,Class code is used to identify the generic function of the device in some cases"
hexmask.long.byte 0x00 0.--7. 1. "REV_ID,Specifies a device specific revision identifier"
group.byte 0x0C++0x00
line.byte 0x00 "PCI_CFH_CL_SIZE,PCI Cache Line Size Register"
rgroup.byte 0x0E++0x00
line.byte 0x00 "PCI_CFH_HDR_TYPE,PCI Header Type Register"
bitfld.byte 0x00 7. "MULT_FUNC_DEV,Multi-function device" "0,1"
hexmask.byte 0x00 0.--6. 1. "HDR_TYPE,Header type"
repeat 6. (increment 0x10 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFH_BAR$2,PCI Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.word 0x2C++0x03
line.word 0x00 "PCI_CFH_SUBSYS_VID,PCI Subsystem Vendor ID Register"
line.word 0x02 "PCI_CFH_SUBSYS_ID,PCI Subsystem ID Register"
rgroup.byte 0x34++0x00
line.byte 0x00 "PCI_CFH_CAP_PTR,PCI Capabilities Pointer Register"
rgroup.word 0x40++0x03
line.word 0x00 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI express capability structure"
line.word 0x02 "PCI_CFC_PCIE_CAP,PCI PCIe Capabilities Register"
bitfld.word 0x02 9.--13. "INT_MSG_NUM,Interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 4.--7. "DEV_PORT_TYPE,Device/port type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.word.byte 0x02 0.--3. 1. "CAP_VER,Capability version"
rgroup.long 0x44++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe Device Capabilities Register"
bitfld.long 0x00 28. "FLR_CAP,Function level reset capability" "Not supported,Supported"
wgroup.word 0x48++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe Device Control Register"
bitfld.word 0x00 15. "INIT_FLR,Initiate function level reset" "Not initiated,Initiated"
rgroup.word 0x4A++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe Device Status Register"
bitfld.word 0x00 5. "TRANS_PEND,Transaction pending" "Finished,Pending"
rgroup.long 0x64++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe Device Capabilities 2 Register"
bitfld.long 0x00 4. "CMPL_TO_DIS_SUPP,Completion timeout disable supported" "Not supported,Supported"
bitfld.long 0x00 0.--3. "CMPL_TO_RNG_SUPP,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x68++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe Device Control 2 Register"
bitfld.word 0x00 4. "CMPL_TO_EN,Completion timeout enable" "Disabled,Enabled"
bitfld.word 0x00 0.--3. "CMPL_TO_VALUE,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x80++0x01
line.word 0x00 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,MSI-X capability structure"
group.word 0x82++0x01
line.word 0x00 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X Message Control Register"
bitfld.word 0x00 15. "MSIX_EN,MSI-X enable" "Disabled,Enabled"
bitfld.word 0x00 14. "FUNC_MASK,Function mask" "Not masked,Masked"
hexmask.word 0x00 0.--10. 1. "TABLE_SIZE,Table size"
rgroup.long 0x84++0x07
line.long 0x00 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X Table Offset/BIR Register"
hexmask.long 0x00 3.--31. 0x08 "TABLE_OFFSET,Table offset"
bitfld.long 0x00 0.--2. "TABLE_BIR,Table BIR" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA Offset/BIR Register"
hexmask.long 0x04 3.--31. 0x08 "PBA_OFFSET,PBA offset"
bitfld.long 0x04 0.--2. "PBA_BIR,PBA BIR" "0,1,2,3,4,5,6,7"
rgroup.word 0x90++0x03
line.word 0x00 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI-PM capability structure"
line.word 0x02 "PCI_CFC_PCIPM_CAP,PCI PCI-PM Capabilities Register"
bitfld.word 0x02 15. "PME_SUPPORT[4],PME support for D3 cold state" "Not supported,Supported"
bitfld.word 0x02 14. "[3],PME support for D3 hot state" "Not supported,Supported"
bitfld.word 0x02 13. "[2],PME support for D2 state" "Not supported,Supported"
newline
bitfld.word 0x02 12. "[1],PME support for D1 state" "Not supported,Supported"
bitfld.word 0x02 11. "[0],PME support for D0 state" "Not supported,Supported"
hexmask.word.byte 0x02 0.--2. 1. "VERSION,Version"
group.word 0x94++0x01
line.word 0x00 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM Control And Status Register"
eventfld.word 0x00 15. "PME_STATUS,PME status" "No effect,Clear"
bitfld.word 0x00 8. "PME_EN,Function to generate PM_PME messages to root complex event collector enable" "Disabled,Enabled"
newline
rbitfld.word 0x00 3. "NO_SOFT_RST,Soft reset during transition from D3hot to D0active disable" "No,Yes"
bitfld.word 0x00 0.--1. "PWR_STATE,Power state" "D0,D1,D2,D3"
rgroup.word 0x9C++0x03
line.word 0x00 "PCI_CFC_EA_CAP_LIST,PCI EA Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,Enhanced allocation (EA) capability structure"
line.word 0x02 "PCI_CFC_EA_CAP,PCI EA Capabilities Register"
bitfld.word 0x02 0.--5. "NUM_ENTRIES,Number of entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0xA0++0x0B
line.long 0x00 "PCI_CFC_EA_PE0_FMT,PCI EA Per-Entry 0 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE0_BASE,PCI EA Per-Entry 0 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE0_MAXOFF,PCI EA Per-Entry 0 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
repeat 4. (increment 0xAC 0x10)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFC_EA_PE$2_EXT_BASE,PCI EA Per-Entry $2 Extended Base Register"
repeat.end
rgroup.long 0xB0++0x0B
line.long 0x00 "PCI_CFC_EA_PE1_FMT,PCI EA Per-Entry 1 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE1_BASE,PCI EA Per-Entry 1 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE1_MAXOFF,PCI EA Per-Entry 1 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0xC0++0x0B
line.long 0x00 "PCI_CFC_EA_PE2_FMT,PCI EA Per-Entry 2 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE2_BASE,PCI EA Per-Entry 2 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE2_MAXOFF,PCI EA Per-Entry 2 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0xD0++0x0B
line.long 0x00 "PCI_CFC_EA_PE3_FMT,PCI EA Per-Entry 3 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE3_BASE,PCI EA Per-Entry 3 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE3_MAXOFF,PCI EA Per-Entry 3 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0x100++0x03
line.long 0x00 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER Extended Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
group.long 0x104++0x0B
line.long 0x00 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER Uncorrectable Error Status Register"
eventfld.long 0x00 22. "UCORR_INT_ERR,Uncorrectable internal error" "No error,Error"
eventfld.long 0x00 21. "ACS_VIOLATION_STAT,ACS violation status" "Not occurred,Occurred"
line.long 0x04 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER Uncorrectable Error Mask Register"
bitfld.long 0x04 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask" "Not masked,Masked"
line.long 0x08 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER Uncorrectable Error Severity Register"
bitfld.long 0x08 22. "UCORR_INT_SEV,Uncorrectable internal severity" "Non-fatal,Fatal"
group.long 0x110++0x07
line.long 0x00 "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER Correctable Error Status Register"
eventfld.long 0x00 14. "CORR_INT_ERR,Correctable internal error" "No error,Error"
line.long 0x04 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER Correctable Error Mask Register"
bitfld.long 0x04 14. "CORR_INT_MASK,Correctable internal error mask" "Not masked,Masked"
rgroup.long 0x118++0x03
line.long 0x00 "PCIE_CFC_AER_CAP_CTL,PCIe AER Capabilities And Control Register"
bitfld.long 0x00 0.--4. "FIRST_ERR_PTR,First error pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x130++0x03
line.long 0x00 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
rgroup.word 0x134++0x03
line.word 0x00 "PCIE_CFC_ACS_CAP,PCIe ACS Capability Register"
bitfld.word 0x00 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T)" "Not supported,Supported"
bitfld.word 0x00 2. "ACS_P2P_REQ_REDIR,ACS P2P request redirect (R)" "Not supported,Supported"
bitfld.word 0x00 1. "ACS_TRANS_BLOCK,ACS translation blocking (B)" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_ACS_CTL,PCIe ACS Control Register"
bitfld.word 0x02 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T)" "Disabled,Enabled"
bitfld.word 0x02 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request redirect enable (R)" "Disabled,Enabled"
bitfld.word 0x02 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B)" "Disabled,Enabled"
rgroup.long 0x140++0x07
line.long 0x00 "PCIE_CFC_SRIOV_CAP_HDR,PCIe SR-IOV Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
line.long 0x04 "PCIE_CFC_SRIOV_CAP,PCIe SR_IOV Capability Register"
hexmask.long.word 0x04 21.--31. 1. "VF_MIGRATION_ING_MSG_NUM,VF migration interrupt message number"
bitfld.long 0x04 1. "ARI_CAP_HIER_PRSV,ARI capable hierarchy preserved" "0,1"
bitfld.long 0x04 0. "VF_MIGRATION_CAP,VF migration capable" "Not capable,Capable"
group.word 0x148++0x01
line.word 0x00 "PCIE_CFC_SRIOV_CTL,PCIe SR-IOV Control Register"
rbitfld.word 0x00 11.--15. "PME_SUPPORT,PME support" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rbitfld.word 0x00 10. "D2_SUPPORT,PCI-PM D2 support" "Not supported,Supported"
rbitfld.word 0x00 4. "ARI_CAP_HIERARCHY,ARI capable hierarchy" "0,1"
newline
bitfld.word 0x00 3. "VF_MSE,Memory space for virtual functions enable" "Disabled,Enabled"
rbitfld.word 0x00 2. "VF_MIGRATION_INT_ENABLE,VF migration interrupt enable" "Disabled,Enabled"
rbitfld.word 0x00 1. "VF_MIGRATION_ENABLE,VF migration enable" "Disabled,Enabled"
newline
bitfld.word 0x00 0. "VF_ENABLE,VF enable" "Disabled,Enabled"
rgroup.word 0x14A++0x05
line.word 0x00 "PCIE_CFC_SRIOV_STAT,PCIe SR-IOV Status Register"
bitfld.word 0x00 0. "VF_MIGRATION_STATUS,VF migration status" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_SRIOV_INIT_VFS,PCIe SR-IOV Initial VFs Register"
line.word 0x04 "PCIE_CFC_SRIOV_TOTAL_VFS,PCIe SR-IOV Total VFs Register"
group.word 0x150++0x01
line.word 0x00 "PCIE_CFC_SRIOV_NUM_VFS,PCIe SR-IOV Num VFs Register"
rgroup.word 0x152++0x05
line.word 0x00 "PCIE_CFC_SRIOV_FUNC_DEP_LIST,PCIe SR-IOV Function Dependency List Register"
line.word 0x02 "PCIE_CFC_SRIOV_FIRST_VF_OFF,PCIe SR-IOV First VF Offset Register"
line.word 0x04 "PCIE_CFC_SRIOV_VF_STRIDE,PCIe SR-IOV VF Stride Register"
rgroup.word 0x15A++0x01
line.word 0x00 "PCIE_CFC_SRIOV_VF_DEV_ID,PCIe SR-IOV VF Device ID Register"
rgroup.long 0x15C++0x07
line.long 0x00 "PCIE_CFC_SRIOV_SUP_PAGE_SIZES,PCIe SR-IOV Supported Page Sizes ID Register"
line.long 0x04 "PCIE_CFC_SRIOV_SYS_PAGE_SIZE,PCIe SR-IOV System Page Size ID Register"
repeat 6. (increment 0x164 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCIE_CFC_VF_BAR$2,PCIe SR-IOV VF Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address space"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.long 0x17C++0x03
line.long 0x00 "PCIE_CFC_SRIOV_VF_MIG_STATE_ARR_OFF,PCIe SR-IOV VF Migration State Array Offset Register"
tree.end
tree "PF2_PCI_HDR_TYPE0"
base ad:0x1F0002000
rgroup.long 0x00++0x03
line.long 0x00 "PCI_CFH_DID_VID,PCI Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
group.word 0x04++0x01
line.word 0x00 "PCI_CFH_CMD,PCI Command Register"
bitfld.word 0x00 10. "INTR_DISABLE,Interrupt disable" "No,Yes"
bitfld.word 0x00 2. "BUS_MASTER_EN,Bus master enable" "Disabled,Enabled"
bitfld.word 0x00 1. "MEM_ACCESS,Memory access enable" "Disabled,Enabled"
rgroup.word 0x06++0x01
line.word 0x00 "PCI_CFH_STAT,PCI Status Register"
bitfld.word 0x00 4. "CAP_LIST,Extended Capability list item presence" "Not present,Present"
rgroup.long 0x08++0x03
line.long 0x00 "PCI_CFH_REVID_CLASSCODE,PCI Revision ID and Classcode Register"
hexmask.long.tbyte 0x00 8.--31. 1. "CLASS_CODE,Class code is used to identify the generic function of the device in some cases"
hexmask.long.byte 0x00 0.--7. 1. "REV_ID,Specifies a device specific revision identifier"
group.byte 0x0C++0x00
line.byte 0x00 "PCI_CFH_CL_SIZE,PCI Cache Line Size Register"
rgroup.byte 0x0E++0x00
line.byte 0x00 "PCI_CFH_HDR_TYPE,PCI Header Type Register"
bitfld.byte 0x00 7. "MULT_FUNC_DEV,Multi-function device" "0,1"
hexmask.byte 0x00 0.--6. 1. "HDR_TYPE,Header type"
repeat 6. (increment 0x10 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFH_BAR$2,PCI Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.word 0x2C++0x03
line.word 0x00 "PCI_CFH_SUBSYS_VID,PCI Subsystem Vendor ID Register"
line.word 0x02 "PCI_CFH_SUBSYS_ID,PCI Subsystem ID Register"
rgroup.byte 0x34++0x00
line.byte 0x00 "PCI_CFH_CAP_PTR,PCI Capabilities Pointer Register"
rgroup.word 0x40++0x03
line.word 0x00 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI express capability structure"
line.word 0x02 "PCI_CFC_PCIE_CAP,PCI PCIe Capabilities Register"
bitfld.word 0x02 9.--13. "INT_MSG_NUM,Interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 4.--7. "DEV_PORT_TYPE,Device/port type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.word.byte 0x02 0.--3. 1. "CAP_VER,Capability version"
rgroup.long 0x44++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe Device Capabilities Register"
bitfld.long 0x00 28. "FLR_CAP,Function level reset capability" "Not supported,Supported"
wgroup.word 0x48++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe Device Control Register"
bitfld.word 0x00 15. "INIT_FLR,Initiate function level reset" "Not initiated,Initiated"
rgroup.word 0x4A++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe Device Status Register"
bitfld.word 0x00 5. "TRANS_PEND,Transaction pending" "Finished,Pending"
rgroup.long 0x64++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe Device Capabilities 2 Register"
bitfld.long 0x00 4. "CMPL_TO_DIS_SUPP,Completion timeout disable supported" "Not supported,Supported"
bitfld.long 0x00 0.--3. "CMPL_TO_RNG_SUPP,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x68++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe Device Control 2 Register"
bitfld.word 0x00 4. "CMPL_TO_EN,Completion timeout enable" "Disabled,Enabled"
bitfld.word 0x00 0.--3. "CMPL_TO_VALUE,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x80++0x01
line.word 0x00 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,MSI-X capability structure"
group.word 0x82++0x01
line.word 0x00 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X Message Control Register"
bitfld.word 0x00 15. "MSIX_EN,MSI-X enable" "Disabled,Enabled"
bitfld.word 0x00 14. "FUNC_MASK,Function mask" "Not masked,Masked"
hexmask.word 0x00 0.--10. 1. "TABLE_SIZE,Table size"
rgroup.long 0x84++0x07
line.long 0x00 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X Table Offset/BIR Register"
hexmask.long 0x00 3.--31. 0x08 "TABLE_OFFSET,Table offset"
bitfld.long 0x00 0.--2. "TABLE_BIR,Table BIR" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA Offset/BIR Register"
hexmask.long 0x04 3.--31. 0x08 "PBA_OFFSET,PBA offset"
bitfld.long 0x04 0.--2. "PBA_BIR,PBA BIR" "0,1,2,3,4,5,6,7"
rgroup.word 0x90++0x03
line.word 0x00 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI-PM capability structure"
line.word 0x02 "PCI_CFC_PCIPM_CAP,PCI PCI-PM Capabilities Register"
bitfld.word 0x02 15. "PME_SUPPORT[4],PME support for D3 cold state" "Not supported,Supported"
bitfld.word 0x02 14. "[3],PME support for D3 hot state" "Not supported,Supported"
bitfld.word 0x02 13. "[2],PME support for D2 state" "Not supported,Supported"
newline
bitfld.word 0x02 12. "[1],PME support for D1 state" "Not supported,Supported"
bitfld.word 0x02 11. "[0],PME support for D0 state" "Not supported,Supported"
hexmask.word.byte 0x02 0.--2. 1. "VERSION,Version"
group.word 0x94++0x01
line.word 0x00 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM Control And Status Register"
rbitfld.word 0x00 3. "NO_SOFT_RST,Soft reset during transition from D3hot to D0active disable" "No,Yes"
bitfld.word 0x00 0.--1. "PWR_STATE,Power state" "D0,D1,D2,D3"
rgroup.word 0x9C++0x03
line.word 0x00 "PCI_CFC_EA_CAP_LIST,PCI EA Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,Enhanced allocation (EA) capability structure"
line.word 0x02 "PCI_CFC_EA_CAP,PCI EA Capabilities Register"
bitfld.word 0x02 0.--5. "NUM_ENTRIES,Number of entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0xA0++0x0B
line.long 0x00 "PCI_CFC_EA_PE0_FMT,PCI EA Per-Entry 0 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE0_BASE,PCI EA Per-Entry 0 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE0_MAXOFF,PCI EA Per-Entry 0 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
repeat 3. (increment 0xAC 0x10)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFC_EA_PE$2_EXT_BASE,PCI EA Per-Entry $2 Extended Base Register"
repeat.end
rgroup.long 0xB0++0x0B
line.long 0x00 "PCI_CFC_EA_PE1_FMT,PCI EA Per-Entry 1 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE1_BASE,PCI EA Per-Entry 1 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE1_MAXOFF,PCI EA Per-Entry 1 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0xC0++0x0B
line.long 0x00 "PCI_CFC_EA_PE2_FMT,PCI EA Per-Entry 2 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE2_BASE,PCI EA Per-Entry 2 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE2_MAXOFF,PCI EA Per-Entry 2 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0x100++0x03
line.long 0x00 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER Extended Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
group.long 0x104++0x0B
line.long 0x00 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER Uncorrectable Error Status Register"
eventfld.long 0x00 22. "UCORR_INT_ERR,Uncorrectable internal error" "No error,Error"
eventfld.long 0x00 21. "ACS_VIOLATION_STAT,ACS violation status" "Not occurred,Occurred"
line.long 0x04 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER Uncorrectable Error Mask Register"
bitfld.long 0x04 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask" "Not masked,Masked"
line.long 0x08 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER Uncorrectable Error Severity Register"
bitfld.long 0x08 22. "UCORR_INT_SEV,Uncorrectable internal severity" "Non-fatal,Fatal"
group.long 0x110++0x07
line.long 0x00 "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER Correctable Error Status Register"
eventfld.long 0x00 14. "CORR_INT_ERR,Correctable internal error" "No error,Error"
line.long 0x04 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER Correctable Error Mask Register"
bitfld.long 0x04 14. "CORR_INT_MASK,Correctable internal error mask" "Not masked,Masked"
rgroup.long 0x118++0x03
line.long 0x00 "PCIE_CFC_AER_CAP_CTL,PCIe AER Capabilities And Control Register"
bitfld.long 0x00 0.--4. "FIRST_ERR_PTR,First error pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x130++0x03
line.long 0x00 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
rgroup.word 0x134++0x03
line.word 0x00 "PCIE_CFC_ACS_CAP,PCIe ACS Capability Register"
bitfld.word 0x00 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T)" "Not supported,Supported"
bitfld.word 0x00 2. "ACS_P2P_REQ_REDIR,ACS P2P request redirect (R)" "Not supported,Supported"
bitfld.word 0x00 1. "ACS_TRANS_BLOCK,ACS translation blocking (B)" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_ACS_CTL,PCIe ACS Control Register"
bitfld.word 0x02 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T)" "Disabled,Enabled"
bitfld.word 0x02 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request redirect enable (R)" "Disabled,Enabled"
bitfld.word 0x02 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B)" "Disabled,Enabled"
tree.end
tree "PF3_PCI_HDR_TYPE0"
base ad:0x1F0003000
rgroup.long 0x00++0x03
line.long 0x00 "PCI_CFH_DID_VID,PCI Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
group.word 0x04++0x01
line.word 0x00 "PCI_CFH_CMD,PCI Command Register"
bitfld.word 0x00 10. "INTR_DISABLE,Interrupt disable" "No,Yes"
bitfld.word 0x00 2. "BUS_MASTER_EN,Bus master enable" "Disabled,Enabled"
bitfld.word 0x00 1. "MEM_ACCESS,Memory access enable" "Disabled,Enabled"
rgroup.word 0x06++0x01
line.word 0x00 "PCI_CFH_STAT,PCI Status Register"
bitfld.word 0x00 4. "CAP_LIST,Extended Capability list item presence" "Not present,Present"
rgroup.long 0x08++0x03
line.long 0x00 "PCI_CFH_REVID_CLASSCODE,PCI Revision ID and Classcode Register"
hexmask.long.tbyte 0x00 8.--31. 1. "CLASS_CODE,Class code is used to identify the generic function of the device in some cases"
hexmask.long.byte 0x00 0.--7. 1. "REV_ID,Specifies a device specific revision identifier"
group.byte 0x0C++0x00
line.byte 0x00 "PCI_CFH_CL_SIZE,PCI Cache Line Size Register"
rgroup.byte 0x0E++0x00
line.byte 0x00 "PCI_CFH_HDR_TYPE,PCI Header Type Register"
bitfld.byte 0x00 7. "MULT_FUNC_DEV,Multi-function device" "0,1"
hexmask.byte 0x00 0.--6. 1. "HDR_TYPE,Header type"
repeat 6. (increment 0x10 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFH_BAR$2,PCI Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.word 0x2C++0x03
line.word 0x00 "PCI_CFH_SUBSYS_VID,PCI Subsystem Vendor ID Register"
line.word 0x02 "PCI_CFH_SUBSYS_ID,PCI Subsystem ID Register"
rgroup.byte 0x34++0x00
line.byte 0x00 "PCI_CFH_CAP_PTR,PCI Capabilities Pointer Register"
rgroup.word 0x40++0x03
line.word 0x00 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI express capability structure"
line.word 0x02 "PCI_CFC_PCIE_CAP,PCI PCIe Capabilities Register"
bitfld.word 0x02 9.--13. "INT_MSG_NUM,Interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 4.--7. "DEV_PORT_TYPE,Device/port type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.word.byte 0x02 0.--3. 1. "CAP_VER,Capability version"
rgroup.long 0x44++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe Device Capabilities Register"
bitfld.long 0x00 28. "FLR_CAP,Function level reset capability" "Not supported,Supported"
wgroup.word 0x48++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe Device Control Register"
bitfld.word 0x00 15. "INIT_FLR,Initiate function level reset" "Not initiated,Initiated"
rgroup.word 0x4A++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe Device Status Register"
bitfld.word 0x00 5. "TRANS_PEND,Transaction pending" "Finished,Pending"
rgroup.long 0x64++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe Device Capabilities 2 Register"
bitfld.long 0x00 4. "CMPL_TO_DIS_SUPP,Completion timeout disable supported" "Not supported,Supported"
bitfld.long 0x00 0.--3. "CMPL_TO_RNG_SUPP,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x68++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe Device Control 2 Register"
bitfld.word 0x00 4. "CMPL_TO_EN,Completion timeout enable" "Disabled,Enabled"
bitfld.word 0x00 0.--3. "CMPL_TO_VALUE,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x80++0x01
line.word 0x00 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,MSI-X capability structure"
group.word 0x82++0x01
line.word 0x00 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X Message Control Register"
bitfld.word 0x00 15. "MSIX_EN,MSI-X enable" "Disabled,Enabled"
bitfld.word 0x00 14. "FUNC_MASK,Function mask" "Not masked,Masked"
hexmask.word 0x00 0.--10. 1. "TABLE_SIZE,Table size"
rgroup.long 0x84++0x07
line.long 0x00 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X Table Offset/BIR Register"
hexmask.long 0x00 3.--31. 0x08 "TABLE_OFFSET,Table offset"
bitfld.long 0x00 0.--2. "TABLE_BIR,Table BIR" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA Offset/BIR Register"
hexmask.long 0x04 3.--31. 0x08 "PBA_OFFSET,PBA offset"
bitfld.long 0x04 0.--2. "PBA_BIR,PBA BIR" "0,1,2,3,4,5,6,7"
rgroup.word 0x90++0x03
line.word 0x00 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI-PM capability structure"
line.word 0x02 "PCI_CFC_PCIPM_CAP,PCI PCI-PM Capabilities Register"
bitfld.word 0x02 15. "PME_SUPPORT[4],PME support for D3 cold state" "Not supported,Supported"
bitfld.word 0x02 14. "[3],PME support for D3 hot state" "Not supported,Supported"
bitfld.word 0x02 13. "[2],PME support for D2 state" "Not supported,Supported"
newline
bitfld.word 0x02 12. "[1],PME support for D1 state" "Not supported,Supported"
bitfld.word 0x02 11. "[0],PME support for D0 state" "Not supported,Supported"
hexmask.word.byte 0x02 0.--2. 1. "VERSION,Version"
group.word 0x94++0x01
line.word 0x00 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM Control And Status Register"
rbitfld.word 0x00 3. "NO_SOFT_RST,Soft reset during transition from D3hot to D0active disable" "No,Yes"
bitfld.word 0x00 0.--1. "PWR_STATE,Power state" "D0,D1,D2,D3"
rgroup.word 0x9C++0x03
line.word 0x00 "PCI_CFC_EA_CAP_LIST,PCI EA Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,Enhanced allocation (EA) capability structure"
line.word 0x02 "PCI_CFC_EA_CAP,PCI EA Capabilities Register"
bitfld.word 0x02 0.--5. "NUM_ENTRIES,Number of entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0xA0++0x0B
line.long 0x00 "PCI_CFC_EA_PE0_FMT,PCI EA Per-Entry 0 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE0_BASE,PCI EA Per-Entry 0 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE0_MAXOFF,PCI EA Per-Entry 0 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
repeat 2. (increment 0xAC 0x10)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFC_EA_PE$2_EXT_BASE,PCI EA Per-Entry $2 Extended Base Register"
repeat.end
rgroup.long 0xB0++0x0B
line.long 0x00 "PCI_CFC_EA_PE1_FMT,PCI EA Per-Entry 1 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE1_BASE,PCI EA Per-Entry 1 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE1_MAXOFF,PCI EA Per-Entry 1 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0x100++0x03
line.long 0x00 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER Extended Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
group.long 0x104++0x0B
line.long 0x00 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER Uncorrectable Error Status Register"
eventfld.long 0x00 22. "UCORR_INT_ERR,Uncorrectable internal error" "No error,Error"
eventfld.long 0x00 21. "ACS_VIOLATION_STAT,ACS violation status" "Not occurred,Occurred"
line.long 0x04 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER Uncorrectable Error Mask Register"
bitfld.long 0x04 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask" "Not masked,Masked"
line.long 0x08 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER Uncorrectable Error Severity Register"
bitfld.long 0x08 22. "UCORR_INT_SEV,Uncorrectable internal severity" "Non-fatal,Fatal"
rgroup.long 0x118++0x03
line.long 0x00 "PCIE_CFC_AER_CAP_CTL,PCIe AER Capabilities And Control Register"
bitfld.long 0x00 0.--4. "FIRST_ERR_PTR,First error pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x130++0x03
line.long 0x00 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
rgroup.word 0x134++0x03
line.word 0x00 "PCIE_CFC_ACS_CAP,PCIe ACS Capability Register"
bitfld.word 0x00 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T)" "Not supported,Supported"
bitfld.word 0x00 2. "ACS_P2P_REQ_REDIR,ACS P2P request redirect (R)" "Not supported,Supported"
bitfld.word 0x00 1. "ACS_TRANS_BLOCK,ACS translation blocking (B)" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_ACS_CTL,PCIe ACS Control Register"
bitfld.word 0x02 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T)" "Disabled,Enabled"
bitfld.word 0x02 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request redirect enable (R)" "Disabled,Enabled"
bitfld.word 0x02 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B)" "Disabled,Enabled"
tree.end
tree "PF4_PCI_HDR_TYPE0"
base ad:0x1F0004000
rgroup.long 0x00++0x03
line.long 0x00 "PCI_CFH_DID_VID,PCI Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
group.word 0x04++0x01
line.word 0x00 "PCI_CFH_CMD,PCI Command Register"
bitfld.word 0x00 10. "INTR_DISABLE,Interrupt disable" "No,Yes"
bitfld.word 0x00 2. "BUS_MASTER_EN,Bus master enable" "Disabled,Enabled"
bitfld.word 0x00 1. "MEM_ACCESS,Memory access enable" "Disabled,Enabled"
rgroup.word 0x06++0x01
line.word 0x00 "PCI_CFH_STAT,PCI Status Register"
bitfld.word 0x00 4. "CAP_LIST,Extended Capability list item presence" "Not present,Present"
rgroup.long 0x08++0x03
line.long 0x00 "PCI_CFH_REVID_CLASSCODE,PCI Revision ID and Classcode Register"
hexmask.long.tbyte 0x00 8.--31. 1. "CLASS_CODE,Class code is used to identify the generic function of the device in some cases"
hexmask.long.byte 0x00 0.--7. 1. "REV_ID,Specifies a device specific revision identifier"
group.byte 0x0C++0x00
line.byte 0x00 "PCI_CFH_CL_SIZE,PCI Cache Line Size Register"
rgroup.byte 0x0E++0x00
line.byte 0x00 "PCI_CFH_HDR_TYPE,PCI Header Type Register"
bitfld.byte 0x00 7. "MULT_FUNC_DEV,Multi-function device" "0,1"
hexmask.byte 0x00 0.--6. 1. "HDR_TYPE,Header type"
repeat 6. (increment 0x10 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFH_BAR$2,PCI Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.word 0x2C++0x03
line.word 0x00 "PCI_CFH_SUBSYS_VID,PCI Subsystem Vendor ID Register"
line.word 0x02 "PCI_CFH_SUBSYS_ID,PCI Subsystem ID Register"
rgroup.byte 0x34++0x00
line.byte 0x00 "PCI_CFH_CAP_PTR,PCI Capabilities Pointer Register"
rgroup.word 0x40++0x03
line.word 0x00 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI express capability structure"
line.word 0x02 "PCI_CFC_PCIE_CAP,PCI PCIe Capabilities Register"
bitfld.word 0x02 9.--13. "INT_MSG_NUM,Interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 4.--7. "DEV_PORT_TYPE,Device/port type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.word.byte 0x02 0.--3. 1. "CAP_VER,Capability version"
rgroup.long 0x44++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe Device Capabilities Register"
bitfld.long 0x00 28. "FLR_CAP,Function level reset capability" "Not supported,Supported"
wgroup.word 0x48++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe Device Control Register"
bitfld.word 0x00 15. "INIT_FLR,Initiate function level reset" "Not initiated,Initiated"
rgroup.word 0x4A++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe Device Status Register"
bitfld.word 0x00 5. "TRANS_PEND,Transaction pending" "Finished,Pending"
rgroup.long 0x64++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe Device Capabilities 2 Register"
bitfld.long 0x00 4. "CMPL_TO_DIS_SUPP,Completion timeout disable supported" "Not supported,Supported"
bitfld.long 0x00 0.--3. "CMPL_TO_RNG_SUPP,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x68++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe Device Control 2 Register"
bitfld.word 0x00 4. "CMPL_TO_EN,Completion timeout enable" "Disabled,Enabled"
bitfld.word 0x00 0.--3. "CMPL_TO_VALUE,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x80++0x01
line.word 0x00 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,MSI-X capability structure"
group.word 0x82++0x01
line.word 0x00 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X Message Control Register"
bitfld.word 0x00 15. "MSIX_EN,MSI-X enable" "Disabled,Enabled"
bitfld.word 0x00 14. "FUNC_MASK,Function mask" "Not masked,Masked"
hexmask.word 0x00 0.--10. 1. "TABLE_SIZE,Table size"
rgroup.long 0x84++0x07
line.long 0x00 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X Table Offset/BIR Register"
hexmask.long 0x00 3.--31. 0x08 "TABLE_OFFSET,Table offset"
bitfld.long 0x00 0.--2. "TABLE_BIR,Table BIR" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA Offset/BIR Register"
hexmask.long 0x04 3.--31. 0x08 "PBA_OFFSET,PBA offset"
bitfld.long 0x04 0.--2. "PBA_BIR,PBA BIR" "0,1,2,3,4,5,6,7"
rgroup.word 0x90++0x03
line.word 0x00 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI-PM capability structure"
line.word 0x02 "PCI_CFC_PCIPM_CAP,PCI PCI-PM Capabilities Register"
bitfld.word 0x02 15. "PME_SUPPORT[4],PME support for D3 cold state" "Not supported,Supported"
bitfld.word 0x02 14. "[3],PME support for D3 hot state" "Not supported,Supported"
bitfld.word 0x02 13. "[2],PME support for D2 state" "Not supported,Supported"
newline
bitfld.word 0x02 12. "[1],PME support for D1 state" "Not supported,Supported"
bitfld.word 0x02 11. "[0],PME support for D0 state" "Not supported,Supported"
hexmask.word.byte 0x02 0.--2. 1. "VERSION,Version"
group.word 0x94++0x01
line.word 0x00 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM Control And Status Register"
rbitfld.word 0x00 3. "NO_SOFT_RST,Soft reset during transition from D3hot to D0active disable" "No,Yes"
bitfld.word 0x00 0.--1. "PWR_STATE,Power state" "D0,D1,D2,D3"
rgroup.word 0x9C++0x03
line.word 0x00 "PCI_CFC_EA_CAP_LIST,PCI EA Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,Enhanced allocation (EA) capability structure"
line.word 0x02 "PCI_CFC_EA_CAP,PCI EA Capabilities Register"
bitfld.word 0x02 0.--5. "NUM_ENTRIES,Number of entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0xA0++0x0B
line.long 0x00 "PCI_CFC_EA_PE0_FMT,PCI EA Per-Entry 0 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE0_BASE,PCI EA Per-Entry 0 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE0_MAXOFF,PCI EA Per-Entry 0 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
repeat 2. (increment 0xAC 0x10)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFC_EA_PE$2_EXT_BASE,PCI EA Per-Entry $2 Extended Base Register"
repeat.end
rgroup.long 0xB0++0x0B
line.long 0x00 "PCI_CFC_EA_PE1_FMT,PCI EA Per-Entry 1 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE1_BASE,PCI EA Per-Entry 1 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE1_MAXOFF,PCI EA Per-Entry 1 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0x100++0x03
line.long 0x00 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER Extended Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
group.long 0x104++0x0B
line.long 0x00 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER Uncorrectable Error Status Register"
eventfld.long 0x00 22. "UCORR_INT_ERR,Uncorrectable internal error" "No error,Error"
eventfld.long 0x00 21. "ACS_VIOLATION_STAT,ACS violation status" "Not occurred,Occurred"
line.long 0x04 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER Uncorrectable Error Mask Register"
bitfld.long 0x04 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask" "Not masked,Masked"
line.long 0x08 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER Uncorrectable Error Severity Register"
bitfld.long 0x08 22. "UCORR_INT_SEV,Uncorrectable internal severity" "Non-fatal,Fatal"
rgroup.long 0x118++0x03
line.long 0x00 "PCIE_CFC_AER_CAP_CTL,PCIe AER Capabilities And Control Register"
bitfld.long 0x00 0.--4. "FIRST_ERR_PTR,First error pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x130++0x03
line.long 0x00 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
rgroup.word 0x134++0x03
line.word 0x00 "PCIE_CFC_ACS_CAP,PCIe ACS Capability Register"
bitfld.word 0x00 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T)" "Not supported,Supported"
bitfld.word 0x00 2. "ACS_P2P_REQ_REDIR,ACS P2P request redirect (R)" "Not supported,Supported"
bitfld.word 0x00 1. "ACS_TRANS_BLOCK,ACS translation blocking (B)" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_ACS_CTL,PCIe ACS Control Register"
bitfld.word 0x02 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T)" "Disabled,Enabled"
bitfld.word 0x02 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request redirect enable (R)" "Disabled,Enabled"
bitfld.word 0x02 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B)" "Disabled,Enabled"
tree.end
tree "PF5_PCI_HDR_TYPE0"
base ad:0x1F0005000
rgroup.long 0x00++0x03
line.long 0x00 "PCI_CFH_DID_VID,PCI Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
group.word 0x04++0x01
line.word 0x00 "PCI_CFH_CMD,PCI Command Register"
bitfld.word 0x00 10. "INTR_DISABLE,Interrupt disable" "No,Yes"
bitfld.word 0x00 2. "BUS_MASTER_EN,Bus master enable" "Disabled,Enabled"
bitfld.word 0x00 1. "MEM_ACCESS,Memory access enable" "Disabled,Enabled"
rgroup.word 0x06++0x01
line.word 0x00 "PCI_CFH_STAT,PCI Status Register"
bitfld.word 0x00 4. "CAP_LIST,Extended Capability list item presence" "Not present,Present"
rgroup.long 0x08++0x03
line.long 0x00 "PCI_CFH_REVID_CLASSCODE,PCI Revision ID and Classcode Register"
hexmask.long.tbyte 0x00 8.--31. 1. "CLASS_CODE,Class code is used to identify the generic function of the device in some cases"
hexmask.long.byte 0x00 0.--7. 1. "REV_ID,Specifies a device specific revision identifier"
group.byte 0x0C++0x00
line.byte 0x00 "PCI_CFH_CL_SIZE,PCI Cache Line Size Register"
rgroup.byte 0x0E++0x00
line.byte 0x00 "PCI_CFH_HDR_TYPE,PCI Header Type Register"
bitfld.byte 0x00 7. "MULT_FUNC_DEV,Multi-function device" "0,1"
hexmask.byte 0x00 0.--6. 1. "HDR_TYPE,Header type"
repeat 6. (increment 0x10 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFH_BAR$2,PCI Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.word 0x2C++0x03
line.word 0x00 "PCI_CFH_SUBSYS_VID,PCI Subsystem Vendor ID Register"
line.word 0x02 "PCI_CFH_SUBSYS_ID,PCI Subsystem ID Register"
rgroup.byte 0x34++0x00
line.byte 0x00 "PCI_CFH_CAP_PTR,PCI Capabilities Pointer Register"
group.byte 0x3C++0x00
line.byte 0x00 "PCI_CFH_INT_LINE,PCI Interrupt Line Register"
rgroup.byte 0x3D++0x00
line.byte 0x00 "PCI_CFH_INT_PIN,PCI Interrupt Pin Register"
rgroup.word 0x40++0x03
line.word 0x00 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI express capability structure"
line.word 0x02 "PCI_CFC_PCIE_CAP,PCI PCIe Capabilities Register"
bitfld.word 0x02 9.--13. "INT_MSG_NUM,Interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 4.--7. "DEV_PORT_TYPE,Device/port type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.word.byte 0x02 0.--3. 1. "CAP_VER,Capability version"
rgroup.long 0x44++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe Device Capabilities Register"
bitfld.long 0x00 28. "FLR_CAP,Function level reset capability" "Not supported,Supported"
wgroup.word 0x48++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe Device Control Register"
bitfld.word 0x00 15. "INIT_FLR,Initiate function level reset" "Not initiated,Initiated"
rgroup.word 0x4A++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe Device Status Register"
bitfld.word 0x00 5. "TRANS_PEND,Transaction pending" "Finished,Pending"
rgroup.long 0x64++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe Device Capabilities 2 Register"
bitfld.long 0x00 4. "CMPL_TO_DIS_SUPP,Completion timeout disable supported" "Not supported,Supported"
bitfld.long 0x00 0.--3. "CMPL_TO_RNG_SUPP,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x68++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe Device Control 2 Register"
bitfld.word 0x00 4. "CMPL_TO_EN,Completion timeout enable" "Disabled,Enabled"
bitfld.word 0x00 0.--3. "CMPL_TO_VALUE,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x80++0x01
line.word 0x00 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,MSI-X capability structure"
group.word 0x82++0x01
line.word 0x00 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X Message Control Register"
bitfld.word 0x00 15. "MSIX_EN,MSI-X enable" "Disabled,Enabled"
bitfld.word 0x00 14. "FUNC_MASK,Function mask" "Not masked,Masked"
hexmask.word 0x00 0.--10. 1. "TABLE_SIZE,Table size"
rgroup.long 0x84++0x07
line.long 0x00 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X Table Offset/BIR Register"
hexmask.long 0x00 3.--31. 0x08 "TABLE_OFFSET,Table offset"
bitfld.long 0x00 0.--2. "TABLE_BIR,Table BIR" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA Offset/BIR Register"
hexmask.long 0x04 3.--31. 0x08 "PBA_OFFSET,PBA offset"
bitfld.long 0x04 0.--2. "PBA_BIR,PBA BIR" "0,1,2,3,4,5,6,7"
rgroup.word 0x90++0x03
line.word 0x00 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI-PM capability structure"
line.word 0x02 "PCI_CFC_PCIPM_CAP,PCI PCI-PM Capabilities Register"
bitfld.word 0x02 15. "PME_SUPPORT[4],PME support for D3 cold state" "Not supported,Supported"
bitfld.word 0x02 14. "[3],PME support for D3 hot state" "Not supported,Supported"
bitfld.word 0x02 13. "[2],PME support for D2 state" "Not supported,Supported"
newline
bitfld.word 0x02 12. "[1],PME support for D1 state" "Not supported,Supported"
bitfld.word 0x02 11. "[0],PME support for D0 state" "Not supported,Supported"
hexmask.word.byte 0x02 0.--2. 1. "VERSION,Version"
group.word 0x94++0x01
line.word 0x00 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM Control And Status Register"
rbitfld.word 0x00 3. "NO_SOFT_RST,Soft reset during transition from D3hot to D0active disable" "No,Yes"
bitfld.word 0x00 0.--1. "PWR_STATE,Power state" "D0,D1,D2,D3"
rgroup.word 0x9C++0x03
line.word 0x00 "PCI_CFC_EA_CAP_LIST,PCI EA Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,Enhanced allocation (EA) capability structure"
line.word 0x02 "PCI_CFC_EA_CAP,PCI EA Capabilities Register"
bitfld.word 0x02 0.--5. "NUM_ENTRIES,Number of entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0xA0++0x0B
line.long 0x00 "PCI_CFC_EA_PE0_FMT,PCI EA Per-Entry 0 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE0_BASE,PCI EA Per-Entry 0 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE0_MAXOFF,PCI EA Per-Entry 0 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
repeat 3. (increment 0xAC 0x10)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFC_EA_PE$2_EXT_BASE,PCI EA Per-Entry $2 Extended Base Register"
repeat.end
rgroup.long 0xB0++0x0B
line.long 0x00 "PCI_CFC_EA_PE1_FMT,PCI EA Per-Entry 1 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE1_BASE,PCI EA Per-Entry 1 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE1_MAXOFF,PCI EA Per-Entry 1 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0xC0++0x0B
line.long 0x00 "PCI_CFC_EA_PE2_FMT,PCI EA Per-Entry 2 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE2_BASE,PCI EA Per-Entry 2 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE2_MAXOFF,PCI EA Per-Entry 2 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0x100++0x03
line.long 0x00 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER Extended Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
group.long 0x104++0x0B
line.long 0x00 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER Uncorrectable Error Status Register"
eventfld.long 0x00 22. "UCORR_INT_ERR,Uncorrectable internal error" "No error,Error"
eventfld.long 0x00 21. "ACS_VIOLATION_STAT,ACS violation status" "Not occurred,Occurred"
line.long 0x04 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER Uncorrectable Error Mask Register"
bitfld.long 0x04 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask" "Not masked,Masked"
line.long 0x08 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER Uncorrectable Error Severity Register"
bitfld.long 0x08 22. "UCORR_INT_SEV,Uncorrectable internal severity" "Non-fatal,Fatal"
rgroup.long 0x118++0x03
line.long 0x00 "PCIE_CFC_AER_CAP_CTL,PCIe AER Capabilities And Control Register"
bitfld.long 0x00 0.--4. "FIRST_ERR_PTR,First error pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x130++0x03
line.long 0x00 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
rgroup.word 0x134++0x03
line.word 0x00 "PCIE_CFC_ACS_CAP,PCIe ACS Capability Register"
bitfld.word 0x00 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T)" "Not supported,Supported"
bitfld.word 0x00 2. "ACS_P2P_REQ_REDIR,ACS P2P request redirect (R)" "Not supported,Supported"
bitfld.word 0x00 1. "ACS_TRANS_BLOCK,ACS translation blocking (B)" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_ACS_CTL,PCIe ACS Control Register"
bitfld.word 0x02 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T)" "Disabled,Enabled"
bitfld.word 0x02 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request redirect enable (R)" "Disabled,Enabled"
bitfld.word 0x02 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B)" "Disabled,Enabled"
tree.end
tree "PF6_PCI_HDR_TYPE0"
base ad:0x1F0006000
rgroup.long 0x00++0x03
line.long 0x00 "PCI_CFH_DID_VID,PCI Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
group.word 0x04++0x01
line.word 0x00 "PCI_CFH_CMD,PCI Command Register"
bitfld.word 0x00 10. "INTR_DISABLE,Interrupt disable" "No,Yes"
bitfld.word 0x00 2. "BUS_MASTER_EN,Bus master enable" "Disabled,Enabled"
bitfld.word 0x00 1. "MEM_ACCESS,Memory access enable" "Disabled,Enabled"
rgroup.word 0x06++0x01
line.word 0x00 "PCI_CFH_STAT,PCI Status Register"
bitfld.word 0x00 4. "CAP_LIST,Extended Capability list item presence" "Not present,Present"
rgroup.long 0x08++0x03
line.long 0x00 "PCI_CFH_REVID_CLASSCODE,PCI Revision ID and Classcode Register"
hexmask.long.tbyte 0x00 8.--31. 1. "CLASS_CODE,Class code is used to identify the generic function of the device in some cases"
hexmask.long.byte 0x00 0.--7. 1. "REV_ID,Specifies a device specific revision identifier"
group.byte 0x0C++0x00
line.byte 0x00 "PCI_CFH_CL_SIZE,PCI Cache Line Size Register"
rgroup.byte 0x0E++0x00
line.byte 0x00 "PCI_CFH_HDR_TYPE,PCI Header Type Register"
bitfld.byte 0x00 7. "MULT_FUNC_DEV,Multi-function device" "0,1"
hexmask.byte 0x00 0.--6. 1. "HDR_TYPE,Header type"
repeat 6. (increment 0x10 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFH_BAR$2,PCI Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.word 0x2C++0x03
line.word 0x00 "PCI_CFH_SUBSYS_VID,PCI Subsystem Vendor ID Register"
line.word 0x02 "PCI_CFH_SUBSYS_ID,PCI Subsystem ID Register"
rgroup.byte 0x34++0x00
line.byte 0x00 "PCI_CFH_CAP_PTR,PCI Capabilities Pointer Register"
rgroup.word 0x40++0x03
line.word 0x00 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI express capability structure"
line.word 0x02 "PCI_CFC_PCIE_CAP,PCI PCIe Capabilities Register"
bitfld.word 0x02 9.--13. "INT_MSG_NUM,Interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 4.--7. "DEV_PORT_TYPE,Device/port type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.word.byte 0x02 0.--3. 1. "CAP_VER,Capability version"
rgroup.long 0x44++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe Device Capabilities Register"
bitfld.long 0x00 28. "FLR_CAP,Function level reset capability" "Not supported,Supported"
wgroup.word 0x48++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe Device Control Register"
bitfld.word 0x00 15. "INIT_FLR,Initiate function level reset" "Not initiated,Initiated"
rgroup.word 0x4A++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe Device Status Register"
bitfld.word 0x00 5. "TRANS_PEND,Transaction pending" "Finished,Pending"
rgroup.long 0x64++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe Device Capabilities 2 Register"
bitfld.long 0x00 4. "CMPL_TO_DIS_SUPP,Completion timeout disable supported" "Not supported,Supported"
bitfld.long 0x00 0.--3. "CMPL_TO_RNG_SUPP,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x68++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe Device Control 2 Register"
bitfld.word 0x00 4. "CMPL_TO_EN,Completion timeout enable" "Disabled,Enabled"
bitfld.word 0x00 0.--3. "CMPL_TO_VALUE,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x80++0x01
line.word 0x00 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,MSI-X capability structure"
group.word 0x82++0x01
line.word 0x00 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X Message Control Register"
bitfld.word 0x00 15. "MSIX_EN,MSI-X enable" "Disabled,Enabled"
bitfld.word 0x00 14. "FUNC_MASK,Function mask" "Not masked,Masked"
hexmask.word 0x00 0.--10. 1. "TABLE_SIZE,Table size"
rgroup.long 0x84++0x07
line.long 0x00 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X Table Offset/BIR Register"
hexmask.long 0x00 3.--31. 0x08 "TABLE_OFFSET,Table offset"
bitfld.long 0x00 0.--2. "TABLE_BIR,Table BIR" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA Offset/BIR Register"
hexmask.long 0x04 3.--31. 0x08 "PBA_OFFSET,PBA offset"
bitfld.long 0x04 0.--2. "PBA_BIR,PBA BIR" "0,1,2,3,4,5,6,7"
rgroup.word 0x90++0x03
line.word 0x00 "PCI_CFC_PCIPM_CAP_LIST,PCI PCI-PM Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI-PM capability structure"
line.word 0x02 "PCI_CFC_PCIPM_CAP,PCI PCI-PM Capabilities Register"
bitfld.word 0x02 15. "PME_SUPPORT[4],PME support for D3 cold state" "Not supported,Supported"
bitfld.word 0x02 14. "[3],PME support for D3 hot state" "Not supported,Supported"
bitfld.word 0x02 13. "[2],PME support for D2 state" "Not supported,Supported"
newline
bitfld.word 0x02 12. "[1],PME support for D1 state" "Not supported,Supported"
bitfld.word 0x02 11. "[0],PME support for D0 state" "Not supported,Supported"
hexmask.word.byte 0x02 0.--2. 1. "VERSION,Version"
group.word 0x94++0x01
line.word 0x00 "PCI_CFC_PCIPM_CTL_STAT,PCI PCI-PM Control And Status Register"
rbitfld.word 0x00 3. "NO_SOFT_RST,Soft reset during transition from D3hot to D0active disable" "No,Yes"
bitfld.word 0x00 0.--1. "PWR_STATE,Power state" "D0,D1,D2,D3"
rgroup.word 0x9C++0x03
line.word 0x00 "PCI_CFC_EA_CAP_LIST,PCI EA Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,Enhanced allocation (EA) capability structure"
line.word 0x02 "PCI_CFC_EA_CAP,PCI EA Capabilities Register"
bitfld.word 0x02 0.--5. "NUM_ENTRIES,Number of entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0xA0++0x0B
line.long 0x00 "PCI_CFC_EA_PE0_FMT,PCI EA Per-Entry 0 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE0_BASE,PCI EA Per-Entry 0 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE0_MAXOFF,PCI EA Per-Entry 0 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
repeat 2. (increment 0xAC 0x10)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFC_EA_PE$2_EXT_BASE,PCI EA Per-Entry $2 Extended Base Register"
repeat.end
rgroup.long 0xB0++0x0B
line.long 0x00 "PCI_CFC_EA_PE1_FMT,PCI EA Per-Entry 1 Format Register"
bitfld.long 0x00 31. "ENABLE,Enable" "Disabled,Enabled"
bitfld.long 0x00 30. "WRITABLE,Writable" "Read-only,Readable/Writable"
hexmask.long.byte 0x00 16.--23. 1. "SEC_PROP,Secondary properties"
newline
hexmask.long.byte 0x00 8.--15. 1. "PRIM_PROP,Primary properties"
bitfld.long 0x00 4.--7. "BEI,BAR equivalent indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--2. "ENTRY_SIZE,Entry size" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_EA_PE1_BASE,PCI EA Per-Entry 1 Base Register"
hexmask.long 0x04 2.--31. 0x04 "BASE,DW address of the start of the resource range"
bitfld.long 0x04 1. "S,Field size" "32-bit,64-bit"
line.long 0x08 "PCI_CFC_EA_PE1_MAXOFF,PCI EA Per-Entry 1 Max Offset Register"
hexmask.long 0x08 2.--31. 0x04 "MAX_OFFSET,Max offset"
bitfld.long 0x08 1. "S,Field size" "32-bit,64-bit"
rgroup.long 0x100++0x03
line.long 0x00 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER Extended Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
group.long 0x104++0x0B
line.long 0x00 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER Uncorrectable Error Status Register"
eventfld.long 0x00 22. "UCORR_INT_ERR,Uncorrectable internal error" "No error,Error"
eventfld.long 0x00 21. "ACS_VIOLATION_STAT,ACS violation status" "Not occurred,Occurred"
line.long 0x04 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER Uncorrectable Error Mask Register"
bitfld.long 0x04 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask" "Not masked,Masked"
line.long 0x08 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER Uncorrectable Error Severity Register"
bitfld.long 0x08 22. "UCORR_INT_SEV,Uncorrectable internal severity" "Non-fatal,Fatal"
group.long 0x110++0x07
line.long 0x00 "PCIE_CFC_AER_CORR_ERR_STAT,PCIe AER Correctable Error Status Register"
eventfld.long 0x00 14. "CORR_INT_ERR,Correctable internal error" "No error,Error"
line.long 0x04 "PCIE_CFC_AER_CORR_ERR_MASK,PCIe AER Correctable Error Mask Register"
bitfld.long 0x04 14. "CORR_INT_MASK,Correctable internal error mask" "Not masked,Masked"
rgroup.long 0x118++0x03
line.long 0x00 "PCIE_CFC_AER_CAP_CTL,PCIe AER Capabilities And Control Register"
bitfld.long 0x00 0.--4. "FIRST_ERR_PTR,First error pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0x130++0x03
line.long 0x00 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
rgroup.word 0x134++0x03
line.word 0x00 "PCIE_CFC_ACS_CAP,PCIe ACS Capability Register"
bitfld.word 0x00 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T)" "Not supported,Supported"
bitfld.word 0x00 2. "ACS_P2P_REQ_REDIR,ACS P2P request redirect (R)" "Not supported,Supported"
bitfld.word 0x00 1. "ACS_TRANS_BLOCK,ACS translation blocking (B)" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_ACS_CTL,PCIe ACS Control Register"
bitfld.word 0x02 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T)" "Disabled,Enabled"
bitfld.word 0x02 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request redirect enable (R)" "Disabled,Enabled"
bitfld.word 0x02 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B)" "Disabled,Enabled"
tree.end
tree.end
tree "PCI Express ECAM VF Config Registers"
repeat 4. (increment ad:0x1F0008000 0x1000)(list 0 0 1 1)(list 1 2 1 2)
tree "VF$2_$3_PCI_HDR_TYPE0"
base $1
rgroup.long 0x00++0x03
line.long 0x00 "PCI_CFH_DID_VID,PCI Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
group.word 0x04++0x01
line.word 0x00 "PCI_CFH_CMD,PCI Command Register"
bitfld.word 0x00 2. "BUS_MASTER_EN,Bus master enable" "Disabled,Enabled"
rgroup.word 0x06++0x01
line.word 0x00 "PCI_CFH_STAT,PCI Status Register"
bitfld.word 0x00 4. "CAP_LIST,Extended Capability list item presence" "Not present,Present"
rgroup.long 0x08++0x03
line.long 0x00 "PCI_CFH_REVID_CLASSCODE,PCI Revision ID and Classcode Register"
hexmask.long.tbyte 0x00 8.--31. 1. "CLASS_CODE,Class code is used to identify the generic function of the device in some cases"
hexmask.long.byte 0x00 0.--7. 1. "REV_ID,Specifies a device specific revision identifier"
rgroup.byte 0x0E++0x00
line.byte 0x00 "PCI_CFH_HDR_TYPE,PCI Header Type Register"
bitfld.byte 0x00 7. "MULT_FUNC_DEV,Multi-function device" "Not set,Set"
hexmask.byte 0x00 0.--6. 1. "HDR_TYPE,Header type"
repeat 6. (increment 0x10 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "PCI_CFH_BAR$2,PCI Base Address Register $2"
hexmask.long 0x00 4.--31. 0x10 "ADDR,Address"
bitfld.long 0x00 3. "PF_MEM,PF memory" "0,1"
bitfld.long 0x00 1.--2. "MEM_TYPE,Memory type" "0,1,2,3"
newline
bitfld.long 0x00 0. "MEM_IO_IND,Memory IO IND" "0,1"
repeat.end
rgroup.long 0x28++0x03
line.long 0x00 "PCI_CFH_CARDBUS_CIS,PCI Cardbus CIS Register"
rgroup.word 0x2C++0x03
line.word 0x00 "PCI_CFH_SUBSYS_VID,PCI Subsystem Vendor ID Register"
line.word 0x02 "PCI_CFH_SUBSYS_ID,PCI Subsystem ID Register"
rgroup.long 0x30++0x03
line.long 0x00 "PCI_CFH_EXP_ROM_BA,PCI Expansion ROM Base Address Register"
rgroup.byte 0x34++0x00
line.byte 0x00 "PCI_CFH_CAP_PTR,PCI Capabilities Pointer Register"
rgroup.word 0x40++0x03
line.word 0x00 "PCI_CFC_PCIE_CAP_LIST,PCI PCIe Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,PCI express capability structure"
line.word 0x02 "PCI_CFC_PCIE_CAP,PCI PCIe Capabilities Register"
bitfld.word 0x02 9.--13. "INT_MSG_NUM,Interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x02 4.--7. "DEV_PORT_TYPE,Device/port type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.word.byte 0x02 0.--3. 1. "CAP_VER,Capability version"
rgroup.long 0x44++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP,PCI PCIe Device Capabilities Register"
bitfld.long 0x00 28. "FLR_CAP,Function level reset capability" "Not supported,Supported"
wgroup.word 0x48++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL,PCI PCIe Device Control Register"
bitfld.word 0x00 15. "INIT_FLR,Initiate function level reset" "Not initiated,Initiated"
rgroup.word 0x4A++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_STAT,PCI PCIe Device Status Register"
bitfld.word 0x00 5. "TRANS_PEND,Transaction pending" "Finished,Pending"
rgroup.long 0x64++0x03
line.long 0x00 "PCI_CFC_PCIE_DEV_CAP2,PCI PCIe Device Capabilities 2 Register"
bitfld.long 0x00 4. "CMPL_TO_DIS_SUPP,Completion timeout disable supported" "Not supported,Supported"
bitfld.long 0x00 0.--3. "CMPL_TO_RNG_SUPP,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x68++0x01
line.word 0x00 "PCI_CFC_PCIE_DEV_CTL2,PCI PCIe Device Control 2 Register"
bitfld.word 0x00 4. "CMPL_TO_EN,Completion timeout enable" "Disabled,Enabled"
bitfld.word 0x00 0.--3. "CMPL_TO_VALUE,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0x80++0x01
line.word 0x00 "PCI_CFC_MSIX_CAP_LIST,PCI MSI-X Capabilities List Register"
hexmask.word.byte 0x00 8.--15. 0x01 "NEXT_CAP_PTR,Next PCI capability structure offset"
hexmask.word.byte 0x00 0.--7. 1. "CAP_ID,MSI-X capability structure"
group.word 0x82++0x01
line.word 0x00 "PCI_CFC_MSIX_MSG_CTL,PCI MSI-X Message Control Register"
bitfld.word 0x00 15. "MSIX_EN,MSI-X enable" "Disabled,Enabled"
bitfld.word 0x00 14. "FUNC_MASK,Function mask" "Not masked,Masked"
hexmask.word 0x00 0.--10. 1. "TABLE_SIZE,Table size"
rgroup.long 0x84++0x07
line.long 0x00 "PCI_CFC_MSIX_TABLE_OFF_BIR,PCI MSI-X Table Offset/BIR Register"
hexmask.long 0x00 3.--31. 0x08 "TABLE_OFFSET,Table offset"
bitfld.long 0x00 0.--2. "TABLE_BIR,Table BIR" "0,1,2,3,4,5,6,7"
line.long 0x04 "PCI_CFC_MSIX_PBA_OFF_BIR,PCI MSI-X PBA Offset/BIR Register"
hexmask.long 0x04 3.--31. 0x08 "PBA_OFFSET,PBA offset"
bitfld.long 0x04 0.--2. "PBA_BIR,PBA BIR" "0,1,2,3,4,5,6,7"
rgroup.long 0x100++0x03
line.long 0x00 "PCIE_CFC_AER_EXT_CAP_HDR,PCIe AER Extended Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
group.long 0x104++0x0B
line.long 0x00 "PCIE_CFC_AER_UCORR_ERR_STAT,PCIe AER Uncorrectable Error Status Register"
eventfld.long 0x00 22. "UCORR_INT_ERR,Uncorrectable internal error" "No error,Error"
line.long 0x04 "PCIE_CFC_AER_UCORR_ERR_MASK,PCIe AER Uncorrectable Error Mask Register"
bitfld.long 0x04 22. "UCORR_INT_ERR_MASK,Uncorrectable internal error mask" "Not masked,Masked"
line.long 0x08 "PCIE_CFC_AER_UCORR_ERR_SEV,PCIe AER Uncorrectable Error Severity Register"
bitfld.long 0x08 22. "UCORR_INT_SEV,Uncorrectable internal severity" "Non-fatal,Fatal"
rgroup.long 0x118++0x03
line.long 0x00 "PCIE_CFC_AER_CAP_CTL,PCIe AER Capabilities And Control Register"
hexmask.long.byte 0x00 0.--4. 0x01 "FIRST_ERR_PTR,First error pointer"
rgroup.long 0x130++0x03
line.long 0x00 "PCIE_CFC_ACS_CAP_HDR,PCIe ACS Capability Header"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_CAP_OFF,Next capability offset"
hexmask.long.byte 0x00 16.--19. 1. "CAP_VER,Capability version"
hexmask.long.word 0x00 0.--15. 1. "PCIE_EXT_CAP_ID,Extended capability ID"
rgroup.word 0x134++0x03
line.word 0x00 "PCIE_CFC_ACS_CAP,PCIe ACS Capability Register"
bitfld.word 0x00 6. "ACS_DIR_TRANS_P2P,ACS direct translated P2P (T)" "Not supported,Supported"
bitfld.word 0x00 2. "ACS_P2P_REQ_REDIR,ACS P2P request redirect (R)" "Not supported,Supported"
bitfld.word 0x00 1. "ACS_TRANS_BLOCK,ACS translation blocking (B)" "Not supported,Supported"
line.word 0x02 "PCIE_CFC_ACS_CTL,PCIe ACS Control Register"
bitfld.word 0x02 6. "ACS_DIR_TRANS_P2P_EN,ACS direct translated P2P enable (T)" "Disabled,Enabled"
bitfld.word 0x02 2. "ACS_P2P_REQ_REDIR_EN,ACS P2P request redirect enable (R)" "Disabled,Enabled"
bitfld.word 0x02 1. "ACS_TRANS_BLOCK_EN,ACS translation blocking enable (B)" "Disabled,Enabled"
tree.end
repeat.end
tree.end
tree "IERB (Integrated Endpoint Register Block)"
base ad:0x1F0800000
repeat 3. (increment 0x00 0x1000)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PF$2_IEP_CFH_DIDVID,PF $2 IEP Config Header Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
repeat.end
repeat 3. (increment 0x04 0x1000)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PF$2_IEP_CFH_SIDSVID,PF $2 IEP Config Header Subsystem ID And Subsystem Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "SUBSYSTEM_DEVICE_ID,Subsystem device ID"
hexmask.long.word 0x00 0.--15. 1. "SUBSYSTEM_VENDOR_ID,Subsystem vendor ID"
repeat.end
repeat 2. (increment 0x08 0x1000)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PF$2_IEP_CFC_VFDID,PF $2 IEP Config Capability VF Device ID Register"
hexmask.long.word 0x00 16.--31. 1. "VF_DEVICE_ID,VF device ID"
repeat.end
repeat 2. (increment 0x800 0x1000)(increment 0. 1.)
group.long $1++0x0B
line.long 0x00 "PF$2_IEP_PFAMQ,PF $2 IEP PF Access Management Qualifier Register"
bitfld.long 0x00 31. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
hexmask.long.word 0x00 0.--14. 1. "ICID,Isolation context ID"
line.long 0x04 "PF$2_IEP_VF1AMQ,PF $2 IEP VF 1 Access Management Qualifier Register"
bitfld.long 0x04 31. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
hexmask.long.word 0x04 0.--14. 1. "ICID,Isolation context ID"
line.long 0x08 "PF$2_IEP_VF2AMQ,PF $2 IEP VF 2 Access Management Qualifier Register"
bitfld.long 0x08 31. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
hexmask.long.word 0x08 0.--14. 1. "ICID,Isolation context ID"
repeat.end
group.long 0x2800++0x03
line.long 0x00 "PF2_IEP_PFAMQ,PF 2 IEP PF Access Management Qualifier Register"
bitfld.long 0x00 31. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
hexmask.long.word 0x00 0.--14. 1. "ICID,Isolation context ID"
repeat 4. (increment 0x3000 0x1000)(increment 3. 1.)
group.long $1++0x07
line.long 0x00 "PF$2_IEP_CFH_DIDVID,PF $2 IEP Config Header Device ID And Vendor ID Register"
hexmask.long.word 0x00 16.--31. 1. "DEVICE_ID,Device ID"
hexmask.long.word 0x00 0.--15. 1. "VENDOR_ID,Vendor ID"
line.long 0x04 "PF$2_IEP_CFH_SIDSVID,PF $2 IEP Config Header Subsystem ID And Subsystem Vendor ID Register"
hexmask.long.word 0x04 16.--31. 1. "SUBSYSTEM_DEVICE_ID,Subsystem device ID"
hexmask.long.word 0x04 0.--15. 1. "SUBSYSTEM_VENDOR_ID,Subsystem vendor ID"
group.long ($1+0x800)++0x03
line.long 0x00 "PF$2_IEP_PFAMQ,PF $2 IEP PF Access Management Qualifier Register"
bitfld.long 0x00 31. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
hexmask.long.word 0x00 0.--14. 1. "ICID,Isolation context ID"
repeat.end
group.long 0x8000++0x03
line.long 0x00 "P0SI0PMAR0,Port 0 Station Interface 0 Primary MAC Address Register 0"
group.long (0x8000+0x08)++0x03
line.long 0x00 "P0SI1PMAR0,Port 0 Station Interface 1 Primary MAC Address Register 0"
group.long (0x8000+0x10)++0x03
line.long 0x00 "P0SI2PMAR0,Port 0 Station Interface 2 Primary MAC Address Register 0"
group.long 0x8100++0x03
line.long 0x00 "P1SI0PMAR0,Port 1 Station Interface 0 Primary MAC Address Register 0"
group.long (0x8100+0x08)++0x03
line.long 0x00 "P1SI1PMAR0,Port 1 Station Interface 1 Primary MAC Address Register 0"
group.long (0x8100+0x10)++0x03
line.long 0x00 "P1SI2PMAR0,Port 1 Station Interface 2 Primary MAC Address Register 0"
group.long 0x8200++0x03
line.long 0x00 "P2SI0PMAR0,Port 2 Station Interface 0 Primary MAC Address Register 0"
group.long 0x8300++0x03
line.long 0x00 "P3SI0PMAR0,Port 3 Station Interface 0 Primary MAC Address Register 0"
group.long 0x8004++0x03
line.long 0x00 "P0SI0PMAR1,Port 0 Station Interface 0 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long (0x8004+0x08)++0x03
line.long 0x00 "P0SI1PMAR1,Port 0 Station Interface 1 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long (0x8004+0x10)++0x03
line.long 0x00 "P0SI2PMAR1,Port 0 Station Interface 2 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x8104++0x03
line.long 0x00 "P1SI0PMAR1,Port 1 Station Interface 0 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long (0x8104+0x08)++0x03
line.long 0x00 "P1SI1PMAR1,Port 1 Station Interface 1 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long (0x8104+0x10)++0x03
line.long 0x00 "P1SI2PMAR1,Port 1 Station Interface 2 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x8204++0x03
line.long 0x00 "P2SI0PMAR1,Port 2 Station Interface 0 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x8304++0x03
line.long 0x00 "P3SI0PMAR1,Port 3 Station Interface 0 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
repeat 4. (increment 0x8080 0x100)(increment 0. 1.)
hgroup.long $1++0x03
hide.long 0x00 "P$2TXMBAR,Port $2 Transmit Memory Buffer Allocation Register"
in
repeat.end
repeat 4. (increment 0x8090 0x100)(increment 0. 1.)
hgroup.long $1++0x03
hide.long 0x00 "P$2RXMBER,Port $2 Receive Memory Buffer Entitlement Register"
in
repeat.end
repeat 4. (increment 0x8094 0x100)(increment 0. 1.)
hgroup.long $1++0x03
hide.long 0x00 "P$2RXMBLR,Port $2 Receive Memory Buffer Limit Register"
in
repeat.end
repeat 4. (increment 0x80A0 0x100)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "P$2RXBCR,Port $2 Receive Byte Credit Register"
hexmask.long.word 0x00 0.--13. 1. "CREDIT,Credit"
repeat.end
group.long 0x80A8++0x03
line.long 0x00 "P0TXBCR,Port 0 Transmit Byte Credit Register"
hexmask.long.word 0x00 0.--15. 1. "CREDIT,Credit"
repeat 2. (increment 0x80B0 0x200)(increment 0. 2.)
group.long $1++0x03
line.long 0x00 "P$2ESMATOR,Port $2 Egress Selection Manager Advance Time Offset Register"
hexmask.long.word 0x00 0.--15. 0x01 "ADV_TIME_OFFSET,Advance time offset"
repeat.end
repeat 3. (increment 0x81A8 0x100)(increment 1. 1.)
group.long $1++0x03
line.long 0x00 "P$2TXBCR,Port $2 Transmit Byte Credit Register"
hexmask.long.word 0x00 0.--15. 1. "CREDIT,Credit"
repeat.end
group.long 0xA000++0x03
line.long 0x00 "FMBDTR,Free Memory Buffer Depletion Threshold Register"
hexmask.long 0x00 0.--27. 1. "THRESH,Free buffer depletion threshold (bytes)"
group.long 0xA100++0x07
line.long 0x00 "PSFPMR,Per-Stream Filtering And Policing Mode Register"
bitfld.long 0x00 3. "PSFP_P3_EN,PSFP port 3 enabled" "Disabled,Enabled"
bitfld.long 0x00 2. "PSFP_P2_EN,PSFP port 2 enabled" "Disabled,Enabled"
bitfld.long 0x00 1. "PSFP_P1_EN,PSFP port 1 enabled" "Disabled,Enabled"
bitfld.long 0x00 0. "PSFP_P0_EN,PSFP port 0 enabled" "Disabled,Enabled"
line.long 0x04 "SGLTTR,Stream Gating Lag Time For Timestamp Refresh Register"
bitfld.long 0x04 0.--4. "LAG_TIME,Lag time [ns]" "2^0,2^1,2^2,2^3,2^4,2^5,2^6,2^7,2^8,2^9,2^10,2^11,2^12,2^13,2^14,2^15,2^16,2^17,2^18,2^19,2^20,2^21,2^22,2^23,2^24,2^25,2^26,2^27,2^28,2^29,2^30,2^31"
group.long 0xA200++0x03
line.long 0x00 "TGLSTR,Time Gating Lookahead Scheduling Time Register"
hexmask.long.tbyte 0x00 0.--19. 1. "MIN_LOOKAHEAD,Minimum lookahead"
group.long 0xA400++0x03
line.long 0x00 "MSICAR,MSI-X Cache Attribute Register"
bitfld.long 0x00 6. "MSI_WRSNP,MSI-X write snoop" "0,1"
bitfld.long 0x00 4.--5. "MSI_WRDOMAIN,MSI-X write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "MSI_WRCACHE,MSI-X write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0xD000++0x03
line.long 0x00 "PF0BLPR0,PF 0 Boot Loader Parameter Register 0"
group.long (0xD000+0x04)++0x03
line.long 0x00 "PF0BLPR1,PF 0 Boot Loader Parameter Register 1"
group.long 0xD010++0x03
line.long 0x00 "PF1BLPR0,PF 1 Boot Loader Parameter Register 0"
group.long (0xD010+0x04)++0x03
line.long 0x00 "PF1BLPR1,PF 1 Boot Loader Parameter Register 1"
group.long 0xD020++0x03
line.long 0x00 "PF2BLPR0,PF 2 Boot Loader Parameter Register 0"
group.long (0xD020+0x04)++0x03
line.long 0x00 "PF2BLPR1,PF 2 Boot Loader Parameter Register 1"
group.long 0xD030++0x03
line.long 0x00 "PF3BLPR0,PF 3 Boot Loader Parameter Register 0"
group.long 0xD040++0x03
line.long 0x00 "PF4BLPR0,PF 4 Boot Loader Parameter Register 0"
group.long (0xD040+0x04)++0x03
line.long 0x00 "PF4BLPR1,PF 4 Boot Loader Parameter Register 1"
group.long 0xD050++0x03
line.long 0x00 "PF5BLPR0,PF 5 Boot Loader Parameter Register 0"
group.long (0xD050+0x04)++0x03
line.long 0x00 "PF5BLPR1,PF 5 Boot Loader Parameter Register 1"
group.long 0xD060++0x03
line.long 0x00 "PF6BLPR0,PF 6 Boot Loader Parameter Register 0"
group.long (0xD060+0x04)++0x03
line.long 0x00 "PF6BLPR1,PF 6 Boot Loader Parameter Register 1"
repeat 2. (increment 0xD0F0 0x100)(increment 0. 1.)
group.long $1++0x07
line.long 0x00 "PF$2VF1BLPR0,PF $2 VF1 Boot Loader Parameter Register 0"
line.long 0x04 "PF$2VF1BLPR1,PF $2 VF1 Boot Loader Parameter Register 1"
group.long ($1+0x10)++0x07
line.long 0x00 "PF$2VF2BLPR0,PF $2 VF2 Boot Loader Parameter Register 0"
line.long 0x04 "PF$2VF2BLPR1,PF $2 VF2 Boot Loader Parameter Register 1"
repeat.end
tree.end
tree "Port Device Registers"
tree "ENETC_PF0"
base ad:0x1F8000000
group.long 0x00++0x03
line.long 0x00 "PMR,Port Mode Register"
bitfld.long 0x00 18. "SI2EN,Station interface 2 enable" "Disabled,Enabled"
bitfld.long 0x00 17. "SI1EN,Station interface 1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "SI0EN,Station interface 0 enable" "Disabled,Enabled"
bitfld.long 0x00 8.--11. "PSPEED,Port speed" "10Mbps,100Mbps,1000Mbps,10Gbps,2.5Gbps,5Gbps,?..."
rgroup.long 0x04++0x03
line.long 0x00 "PSR,Port Status Register"
bitfld.long 0x00 1. "RX_BUSY,Receive busy" "Idle,Busy"
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
group.long 0x14++0x0B
line.long 0x00 "PPFALOR,Port Per-Frame Accounting Length Overhead Register"
bitfld.long 0x00 31. "PFALOE,Per-frame accounting length overhead enable" "Disabled,Enabled"
hexmask.long.byte 0x00 0.--7. 1. "BCO,Byte count overhead"
line.long 0x04 "PSIPMMR,Port Station Interface Promiscuous MAC Mode Register"
bitfld.long 0x04 18. "SI2_MAC_MP,SI 2 MAC multicast promiscuous" "Not qualified,Qualified"
bitfld.long 0x04 17. "SI1_MAC_MP,SI 1 MAC multicast promiscuous" "Not qualified,Qualified"
newline
bitfld.long 0x04 16. "SI0_MAC_MP,SI 0 MAC multicast promiscuous" "Not qualified,Qualified"
bitfld.long 0x04 2. "SI2_MAC_UP,SI 2 MAC unicast promiscuous" "Not qualified,Qualified"
newline
bitfld.long 0x04 1. "SI1_MAC_UP,SI 1 MAC unicast promiscuous" "Not qualified,Qualified"
bitfld.long 0x04 0. "SI0_MAC_UP,SI 0 MAC unicast promiscuous" "Not qualified,Qualified"
line.long 0x08 "PSIPVMR,Port Station Interface Promiscuous VLAN Mode Register"
bitfld.long 0x08 18. "SI2_VLAN_UTA,SI 2 untagged frames (no VLAN) accepted" "Not qualified,Qualified"
bitfld.long 0x08 17. "SI1_VLAN_UTA,SI 1 untagged frames (no VLAN) accepted" "Not qualified,Qualified"
newline
bitfld.long 0x08 16. "SI0_VLAN_UTA,SI 0 untagged frames (no VLAN) accepted" "Not qualified,Qualified"
bitfld.long 0x08 2. "SI2_VLAN_P,SI 2 VLAN promiscuous" "Not qualified,Qualified"
newline
bitfld.long 0x08 1. "SI1_VLAN_P,SI 1 VLAN promiscuous" "Not qualified,Qualified"
bitfld.long 0x08 0. "SI0_VLAN_P,SI 0 VLAN promiscuous" "Not qualified,Qualified"
group.long 0x100++0x03
line.long 0x00 "PSI0PMAR0,Port Station Interface 0 Primary MAC Address Register 0"
group.long 0x108++0x03
line.long 0x00 "PSI1PMAR0,Port Station Interface 1 Primary MAC Address Register 0"
group.long 0x110++0x03
line.long 0x00 "PSI2PMAR0,Port Station Interface 2 Primary MAC Address Register 0"
group.long 0x104++0x03
line.long 0x00 "PSI0PMAR1,Port Station Interface 0 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x10C++0x03
line.long 0x00 "PSI1PMAR1,Port Station Interface 1 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x114++0x03
line.long 0x00 "PSI2PMAR1,Port Station Interface 2 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x200++0x0B
line.long 0x00 "PONVLANR,Port Outer Native VLAN Register"
bitfld.long 0x00 19. "VZE,Port outer native VLAN VID used" "Not used,Used"
bitfld.long 0x00 18. "PNE,Port outer native VLAN used" "Not used,Used"
newline
bitfld.long 0x00 16.--17. "TPID,VLAN Ethertype used" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR.ETYPE"
bitfld.long 0x00 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI,Drop eligible indicator" "Not eligible,Eligible"
hexmask.long.word 0x00 0.--11. 1. "VID,VLAN identifier"
line.long 0x04 "PINVLANR,Port Inner Native VLAN Register"
bitfld.long 0x04 19. "VZE,Port outer native VLAN VID used" "Not used,Used"
bitfld.long 0x04 18. "PNE,Port outer native VLAN used" "Not used,Used"
newline
bitfld.long 0x04 16.--17. "TPID,VLAN Ethertype used" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR2.ETYPE"
bitfld.long 0x04 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12. "DEI,Drop eligible indicator" "Not eligible,Eligible"
hexmask.long.word 0x04 0.--11. 1. "VID,VLAN identifier"
line.long 0x08 "PVCLCTR,Port VLAN Classification Control Register"
bitfld.long 0x08 9. "OAI,Outer as inner" "Not used,Used"
bitfld.long 0x08 8. "IV2,Inner VLAN must be second" "Nth,2nd"
newline
bitfld.long 0x08 7. "IVTPIDL[3],Custom VLAN as defined by PCVLANR2.ETYPE acceptable as inner VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 6. "[2],Custom VLAN as defined by PCVLANR1.ETYPE acceptable as inner VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 5. "[1],Standard S-VLAN 0x88A8 acceptable as inner VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 4. "[0],Standard C-VLAN 0x8100 acceptable as inner VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 3. "OVTPIDL[3],Custom VLAN as defined by PCVLANR2.ETYPE acceptable as outer VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 2. "[2],Custom VLAN as defined by PCVLANR1.ETYPE acceptable as outer VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 1. "[1],Standard S-VLAN 0x88A8 acceptable as outer VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 0. "[0],Standard C-VLAN 0x8100 acceptable as outer VLAN tag" "Not accepted,Accepted"
repeat 2. (increment 0x210 0x04)(increment 1. 1.)
group.long $1++0x03
line.long 0x00 "PCVLANR$2,Port Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x240++0x03
line.long 0x00 "PSI1VLANR,Port Station Interface 1 VLAN Register"
bitfld.long 0x00 31. "E,SI-based VLAN enabled" "Disabled,Enabled"
bitfld.long 0x00 16.--17. "TPID,Tag protocol identifier" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR2.ETYPE"
newline
bitfld.long 0x00 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12. "DEI,Drop eligible indicator" "Not dropped,Dropped"
newline
hexmask.long.word 0x00 0.--11. 1. "VID,VLAN identifier"
group.long 0x244++0x03
line.long 0x00 "PSI2VLANR,Port Station Interface 2 VLAN Register"
bitfld.long 0x00 31. "E,SI-based VLAN enabled" "Disabled,Enabled"
bitfld.long 0x00 16.--17. "TPID,Tag protocol identifier" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR2.ETYPE"
newline
bitfld.long 0x00 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12. "DEI,Drop eligible indicator" "Not dropped,Dropped"
newline
hexmask.long.word 0x00 0.--11. 1. "VID,VLAN identifier"
group.long 0x408++0x03
line.long 0x00 "PQCMR,Port HTA QoS Congestion Mapping Register"
bitfld.long 0x00 21. "PRIORITY_MAP7,Mapping of priority value 7 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 18. "PRIORITY_MAP6,Mapping of priority value 6 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 15. "PRIORITY_MAP5,Mapping of priority value 5 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 12. "PRIORITY_MAP4,Mapping of priority value 4 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 9. "PRIORITY_MAP3,Mapping of priority value 3 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 6. "PRIORITY_MAP2,Mapping of priority value 2 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 3. "PRIORITY_MAP1,Mapping of priority value 1 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 0. "PRIORITY_MAP0,Mapping of priority value 0 to ICM receive port queue priority" "High,Low"
group.long 0x410++0x07
line.long 0x00 "PPAUONTR,Port Pause ON Threshold Register"
hexmask.long 0x00 0.--27. 1. "THRESH,Amount of data accumulated in the internal receive buffer"
line.long 0x04 "PPAUOFFTR,Port Pause OFF Threshold Register"
hexmask.long 0x04 0.--27. 1. "THRESH,Amount of data accumulated in the internal receive buffer"
group.long 0x500++0x03
line.long 0x00 "PQOSMR,Port QoS Mode Register"
bitfld.long 0x00 8. "DTE,DSCP QoS classification enabled for VLAN tagged IP frames" "Disabled,Enabled"
bitfld.long 0x00 7. "DUE,DSCP QoS classification enabled for untagged VLAN IP frames" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--6. "DIPV,Default IPV" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--3. "DDR,Default Discard Resilience" "0,1,2,3"
newline
bitfld.long 0x00 1. "VE,VLAN enable" "Disabled,Enabled"
bitfld.long 0x00 0. "VS,VLAN tag select" "Inner,Outer"
group.long 0x510++0x0B
line.long 0x00 "PVLANIPVMR0,Port VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for receive data path 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for receive data path 6" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for receive data path 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for receive data path 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for receive data path 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for receive data path 2" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for receive data path 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for receive data path 0" "0,1,2,3,4,5,6,7"
line.long 0x04 "PVLANIPVMR1,Port VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for receive data path 15" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for receive data path 14" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for receive data path 13" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for receive data path 12" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for receive data path 11" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for receive data path 10" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for receive data path 9" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for receive data path 8" "0,1,2,3,4,5,6,7"
line.long 0x08 "PVLANDRMR,Port VLAN To DR Mapping Register"
bitfld.long 0x08 30.--31. "PCP_DEI_15,DR value used for receive data path 15" "0,1,2,3"
bitfld.long 0x08 28.--29. "PCP_DEI_14,DR value used for receive data path 14" "0,1,2,3"
newline
bitfld.long 0x08 26.--27. "PCP_DEI_13,DR value used for receive data path 13" "0,1,2,3"
bitfld.long 0x08 24.--25. "PCP_DEI_12,DR value used for receive data path 12" "0,1,2,3"
newline
bitfld.long 0x08 22.--23. "PCP_DEI_11,DR value used for receive data path 11" "0,1,2,3"
bitfld.long 0x08 20.--21. "PCP_DEI_10,DR value used for receive data path 10" "0,1,2,3"
newline
bitfld.long 0x08 18.--19. "PCP_DEI_9,DR value used for receive data path 9" "0,1,2,3"
bitfld.long 0x08 16.--17. "PCP_DEI_8,DR value used for receive data path 8" "0,1,2,3"
newline
bitfld.long 0x08 14.--15. "PCP_DEI_7,DR value used for receive data path 7" "0,1,2,3"
bitfld.long 0x08 12.--13. "PCP_DEI_6,DR value used for receive data path 6" "0,1,2,3"
newline
bitfld.long 0x08 10.--11. "PCP_DEI_5,DR value used for receive data path 5" "0,1,2,3"
bitfld.long 0x08 8.--9. "PCP_DEI_4,DR value used for receive data path 4" "0,1,2,3"
newline
bitfld.long 0x08 6.--7. "PCP_DEI_3,DR value used for receive data path 3" "0,1,2,3"
bitfld.long 0x08 4.--5. "PCP_DEI_2,DR value used for receive data path 2" "0,1,2,3"
newline
bitfld.long 0x08 2.--3. "PCP_DEI_1,DR value used for receive data path 1" "0,1,2,3"
bitfld.long 0x08 0.--1. "PCP_DEI_0,DR value used for receive data path 0" "0,1,2,3"
rgroup.long 0x600++0x07
line.long 0x00 "PRXMBER,Port HTA Receive Memory Buffer Entitlement Register"
hexmask.long 0x00 0.--27. 1. "AMOUNT,Port receive memory buffer entitlement for each port (bytes)"
line.long 0x04 "PRXMBLR,Port HTA Receive Memory Buffer Limit Register"
hexmask.long 0x04 0.--27. 1. "LIMIT,Port receive memory buffer limit for each port (bytes)"
group.long 0x608++0x03
line.long 0x00 "PTXMBAR,Port HTA Transmit Memory Buffer Allocation Register"
hexmask.long 0x00 0.--27. 1. "ALLOC,Transmit buffer memory allocation for each port (bytes)"
rgroup.long 0x60C++0x03
line.long 0x00 "FMBDTR,Free Memory Buffer Depletion Threshold Register"
hexmask.long 0x00 0.--27. 1. "THRESH,Free buffer depletion threshold (bytes)"
rgroup.long 0x680++0x1F
line.long 0x00 "FMBCR,Free Memory Buffer Count Register"
line.long 0x04 "FMBCLWMR,Free Memory Buffer Count Low Watermark Register"
line.long 0x08 "UMBCR,Unassigned Memory Buffer Count Register"
line.long 0x0C "UMBCHWMR,Unassigned Memory Buffer Count High Watermark Register"
line.long 0x10 "PRXMBCR,Port HTA Receive Buffer Count Register"
hexmask.long 0x10 0.--27. 1. "COUNT,Current receive buffer usage count for this port (bytes)"
line.long 0x14 "PRXMBCHWMR,Port HTA Receive Buffer Count High Watermark Register"
hexmask.long 0x14 0.--27. 1. "WATERMARK,High watermark for receive buffer usage since the last read of this register (bytes)"
line.long 0x18 "PTXMBCR,Port HTA Transmit Memory Buffer Count Register"
hexmask.long 0x18 0.--27. 1. "COUNT,Current amount of transmit buffer memory in use (bytes)"
line.long 0x1C "PTXMBCHWMR,Port HTA Transmit Memory Buffer Count High Watermark"
hexmask.long 0x1C 0.--27. 1. "WATERMARK,High watermark for transmit buffer memory since the last read of this register (bytes)"
group.long 0x700++0x03
line.long 0x00 "PICDR0DCR,Port HTA Ingress Congestion DR0 Discard Count Register"
group.long 0x710++0x03
line.long 0x00 "PICDR1DCR,Port HTA Ingress Congestion DR1 Discard Count Register"
group.long 0x720++0x03
line.long 0x00 "PICDR2DCR,Port HTA Ingress Congestion DR2 Discard Count Register"
group.long 0x730++0x03
line.long 0x00 "PICDR3DCR,Port HTA Ingress Congestion DR3 Discard Count Register"
group.long 0x708++0x03
line.long 0x00 "PICDR0DCRRR,Port HTA Ingress Congestion DR0 Discard Count Read-Reset Register"
group.long 0x718++0x03
line.long 0x00 "PICDR1DCRRR,Port HTA Ingress Congestion DR1 Discard Count Read-Reset Register"
group.long 0x728++0x03
line.long 0x00 "PICDR2DCRRR,Port HTA Ingress Congestion DR2 Discard Count Read-Reset Register"
group.long 0x738++0x03
line.long 0x00 "PICDR3DCRRR,Port HTA Ingress Congestion DR3 Discard Count Read-Reset Register"
group.long 0x740++0x03
line.long 0x00 "PICPDSR,Port HTA Ingress Congestion Priority Discard Status Register"
eventfld.long 0x00 28. "DR3_P1DS,DR3 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 24. "DR3_P0DS,DR3 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 20. "DR2_P1DS,DR2 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 16. "DR2_P0DS,DR2 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 12. "DR1_P1DS,DR1 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 8. "DR1_P0DS,DR1 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 4. "DR0_P1DS,DR0 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 0. "DR0_P0DS,DR0 priority 0 discard status" "No clear,Clear"
rgroup.long 0x810++0x03
line.long 0x00 "PBFDSIR,Port Broadcast Frame Drop SI Rejection Register"
rgroup.long 0x900++0x07
line.long 0x00 "PCAPR0,Port Capability Register 0"
hexmask.long.byte 0x00 24.--31. 1. "NUM_RX_BDR,Number of total receive buffer descriptor rings for the port"
hexmask.long.byte 0x00 16.--23. 1. "NUM_TX_BDR,Number of total transmit buffer descriptor rings for the port"
newline
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
newline
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci (Per-Stream Filtering and Policing)" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci (Per-Stream Filtering and Policing)" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
newline
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating (IEEE 802.1Qbv)" "Not supported,Supported"
newline
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload (GRO) support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload (GSO) support" "Not supported,Supported"
line.long 0x04 "PCAPR1,Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1K,2K,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multi-cast hash entries per SI" "64,128,256,512"
newline
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1(0),2(0-1),3(0-2),4(0-3),5(0-4),6(0-5),7(0-6),8(0-7)"
group.long 0x940++0x03
line.long 0x00 "PSI0CFGR0,Port Station Interface 0 Configuration Register 0"
bitfld.long 0x00 28.--31. "SIBW,Station interface traffic class bandwidth weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "SIVC[3],Custom VLAN as defined by PCVLANR2.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 26. "[2],Custom VLAN as defined by PCVLANR1.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
bitfld.long 0x00 25. "[1],Standard S-VLAN 0x88A8 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 24. "[0],Standard C-VLAN 0x8100 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
newline
bitfld.long 0x00 15. "ASE,Anti-spoofing enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SIVIE,Software VLAN insertion enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SPE,Source pruning enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
group.long 0x94C++0x03
line.long 0x00 "PSI1CFGR0,Port Station Interface 1 Configuration Register 0"
bitfld.long 0x00 28.--31. "SIBW,Station interface traffic class bandwidth weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "SIVC[3],Custom VLAN as defined by PCVLANR2.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 26. "[2],Custom VLAN as defined by PCVLANR1.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
bitfld.long 0x00 25. "[1],Standard S-VLAN 0x88A8 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 24. "[0],Standard C-VLAN 0x8100 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
newline
bitfld.long 0x00 15. "ASE,Anti-spoofing enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SIVIE,Software VLAN insertion enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SPE,Source pruning enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
group.long 0x958++0x03
line.long 0x00 "PSI2CFGR0,Port Station Interface 2 Configuration Register 0"
bitfld.long 0x00 28.--31. "SIBW,Station interface traffic class bandwidth weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "SIVC[3],Custom VLAN as defined by PCVLANR2.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 26. "[2],Custom VLAN as defined by PCVLANR1.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
bitfld.long 0x00 25. "[1],Standard S-VLAN 0x88A8 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 24. "[0],Standard C-VLAN 0x8100 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
newline
bitfld.long 0x00 15. "ASE,Anti-spoofing enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SIVIE,Software VLAN insertion enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SPE,Source pruning enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
repeat 2. (increment 0x950 0x0C)(increment 1. 1.)
group.long $1++0x03
line.long 0x00 "PSI$2CFGR1,Port Station Interface $2 Configuration Register 1"
bitfld.long 0x00 28.--30. "TC7_MAP,Traffic class 7 mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "TC6_MAP,Traffic class 6 mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "TC5_MAP,Traffic class 5 mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "TC4_MAP,Traffic class 4 mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "TC3_MAP,Traffic class 3 mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "TC2_MAP,Traffic class 2 mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "TC1_MAP,Traffic class 1 mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "TC0_MAP,Traffic class 0 mapping" "0,1,2,3,4,5,6,7"
repeat.end
group.long 0xE10++0x03
line.long 0x00 "PCMEDR,Port Correctable Memory Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Invalid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "No error,Error"
newline
bitfld.long 0x00 29. "RGD,Report global disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE30++0x03
line.long 0x00 "PUMEDR,Port Uncorrectable Memory Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Invalid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "No error,Error"
newline
bitfld.long 0x00 29. "RGD,Report global disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0x1000++0x03
line.long 0x00 "PIPVTCMR0,Port HTA Tx IPV To Traffic Class Mapping Register 0"
bitfld.long 0x00 28.--30. "IPV7TC,IPV7 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6TC,IPV6 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "IPV5TC,IPV5 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4TC,IPV4 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3TC,IPV3 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2TC,IPV2 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "IPV1TC,IPV1 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0TC,IPV0 to traffic class mapping" "0,1,2,3,4,5,6,7"
repeat 8. (increment 0x1110 0x08)(increment 0. 1.)
group.long $1++0x07
line.long 0x00 "PTC$2CBSR0,Port Traffic Class $2 Credit Based Shaper Register 0"
bitfld.long 0x00 31. "CBSE,Credit based shaper enable" "Disabled,Enabled"
hexmask.long.byte 0x00 0.--6. 1. "BW,Bandwidth in percentage units"
line.long 0x04 "PTC$2CBSR1,Port Traffic Class $2 Credit Based Shaper Register 1"
repeat.end
repeat 8. (increment 0x1210 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PTC$2TSDR,Port Traffic Class $2 Time Specific Departure Register"
bitfld.long 0x00 31. "TSDE,Time specific departure enable" "Disabled,Enabled"
repeat.end
rgroup.long 0x1308++0x03
line.long 0x00 "PPMCAPR,Port Parse Match Capability Register"
bitfld.long 0x00 0.--3. "NUM_PSCM,Number of parse summary classification ternary match rules per port" "8,16,32,64,?..."
group.long 0x1400++0x03
line.long 0x00 "PRSSCR,Port RSS Control Register"
bitfld.long 0x00 9. "NON_IP_EN,Non-IP hash enable" "Disabled,Enabled"
bitfld.long 0x00 5. "IP6_DIS,IPv6 packet disable" "No,Yes"
newline
bitfld.long 0x00 4. "IP6UDP_DIS,IPv6 with UDP disable" "No,Yes"
bitfld.long 0x00 3. "IP4UDP_DIS,IPv4 with UDP disable" "No,Yes"
newline
bitfld.long 0x00 2. "IP6TCP_DIS,IPv6 with TCP packet disable" "No,Yes"
bitfld.long 0x00 1. "IP4_DIS,IPv4 packet disable" "No,Yes"
newline
bitfld.long 0x00 0. "IP4TCP_DIS,IPv4 with TCP packet disable" "No,Yes"
rgroup.long 0x1404++0x03
line.long 0x00 "PRSSCAPR,Port RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling (RSS) entries per SI" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 10. (increment 0x1410 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PRSSKR$2,Port RSS Key Register $2"
repeat.end
group.long 0x1500++0x0B
line.long 0x00 "PLPMR,Port Low Power Mode Register"
bitfld.long 0x00 4. "WDRE,Wake-on-LAN drop resilience enable" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "WDR,Wake-on-LAN drop resilience" "0,1,2,3"
newline
bitfld.long 0x00 1. "WME,Wake-on-LAN mode enable" "Disabled,Enabled"
line.long 0x04 "PWOFCR,Port Wake-On Filter Control Register"
bitfld.long 0x04 9. "MDCE,MLD DMAC check enable" "Disabled,Enabled"
bitfld.long 0x04 8. "HVME,Hash VLAN match enable" "Disabled,Enabled"
newline
bitfld.long 0x04 4. "MLDE,MLD request packet Wake-on-LAN enable" "Disabled,Enabled"
bitfld.long 0x04 3. "NDNSE,ND/NS request packet Wake-on-LAN enable" "Disabled,Enabled"
newline
bitfld.long 0x04 2. "ARPE,ARP request packet Wake-on-LAN enable" "Disabled,Enabled"
bitfld.long 0x04 1. "TSE,TCP SYN message Wake-on-LAN enable" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "MPE,Magic packet Wake-on-LAN enable" "Disabled,Enabled"
line.long 0x08 "PWOSR,Port Wake-On Status Register"
rbitfld.long 0x08 31. "WOLA,Wake-On-LAN active" "Inactive,Active"
rbitfld.long 0x08 30. "ICMB,ICM blocked" "Not blocked,Blocked"
newline
bitfld.long 0x08 4. "MLD,MLD request Wake-on-LAN packet" "Not requested,Requested"
bitfld.long 0x08 3. "NDNS,ND/NS request Wake-on-LAN packet" "Not requested,Requested"
newline
bitfld.long 0x08 2. "ARP,ARP request Wake-on-LAN packet" "Not requested,Requested"
bitfld.long 0x08 1. "TS,TCP SYN Wake-on-LAN message" "Not requested,Requested"
newline
bitfld.long 0x08 0. "MP,Magic Wake-on-LAN packet" "Not requested,Requested"
group.long 0x1520++0x03
line.long 0x00 "PIPV4MR,Port IPv4 Mode Register"
bitfld.long 0x00 31. "ATDE,ARP target protocol IP address detect enable" "Disabled,Enabled"
group.long 0x1528++0x03
line.long 0x00 "PIPV4AR,Port IPv4 Address Register"
rgroup.long 0x1604++0x03
line.long 0x00 "PSIMAFCAPR,Port Station Interface MAC Address Filtering Capability Register"
bitfld.long 0x00 12. "MODE,Mode" "0,1"
hexmask.long.word 0x00 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port"
group.long 0x1614++0x03
line.long 0x00 "PSI0VMAFCFGR,Port Station Interface 0 VSI MAC Address Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI"
group.long 0x1618++0x03
line.long 0x00 "PSI1VMAFCFGR,Port Station Interface 1 VSI MAC Address Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI"
group.long 0x161C++0x03
line.long 0x00 "PSI2VMAFCFGR,Port Station Interface 2 VSI MAC Address Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI"
rgroup.long 0x1680++0x07
line.long 0x00 "PUFDMFR,Port Unicast Frames Dropped Due To MAC Filtering Register"
line.long 0x04 "PMFDMFR,Port Multicast Frames Dropped Due To MAC Filtering Register"
group.long 0x1700++0x03
line.long 0x00 "PSIVLANFMR,Port Station Interface VLAN Filtering Mode Register"
bitfld.long 0x00 0. "VS,VLAN tag select" "Inner,Outer"
rgroup.long 0x1704++0x03
line.long 0x00 "PSIVLANFCAPR,Port Station Interface VLAN Filtering Capability Register"
bitfld.long 0x00 12. "MODE,Mode" "0,1"
hexmask.long.word 0x00 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port"
group.long 0x1714++0x03
line.long 0x00 "PSI0VLANFCFGR,Port Station Interface 0 VLAN Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI"
group.long 0x1718++0x03
line.long 0x00 "PSI1VLANFCFGR,Port Station Interface 1 VLAN Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI"
group.long 0x171C++0x03
line.long 0x00 "PSI2VLANFCFGR,Port Station Interface 2 VLAN Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI"
rgroup.long 0x1780++0x0B
line.long 0x00 "PUFDVFR,Port Unicast Frames Dropped VLAN Filtering Register"
line.long 0x04 "PMFDVFR,Port Multicast Frames Dropped VLAN Filtering Register"
line.long 0x08 "PBFDVFR,Port Broadcast Frames Dropped VLAN Filtering Register"
group.long 0x1800++0x03
line.long 0x00 "PRFSMR,Port RFS Mode Register"
bitfld.long 0x00 31. "RFSE,RFS enable" "Disabled,Enabled"
rgroup.long 0x1804++0x03
line.long 0x00 "PRFSCAPR,Port RFS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RFS,Number of receive flow steering (RFS) entries per port" "16,32,48,64,80,96,112,128,144,160,176,192,208,224,240,256"
group.long 0x1814++0x03
line.long 0x00 "PSI0RFSCFGR,Port Station Interface 0 RFS Configuration Register"
hexmask.long.word 0x00 0.--8. 1. "NUM_RFS,Number of receive flow steering (RFS) entries assigned to the SI"
group.long 0x1814++0x03
line.long 0x00 "PSI1RFSCFGR,Port Station Interface 1 RFS Configuration Register"
hexmask.long.word 0x00 0.--8. 1. "NUM_RFS,Number of receive flow steering (RFS) entries assigned to the SI"
group.long 0x1814++0x03
line.long 0x00 "PSI2RFSCFGR,Port Station Interface 2 RFS Configuration Register"
hexmask.long.word 0x00 0.--8. 1. "NUM_RFS,Number of receive flow steering (RFS) entries assigned to the SI"
group.long 0x1900++0x03
line.long 0x00 "PFPMR,Port Frame Preemption Mode Register"
bitfld.long 0x00 1. "PMACE,Preemptive MAC enable" "Disabled,Enabled"
group.long 0x1910++0x03
line.long 0x00 "PTC0FPR,Port Traffic Class 0 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1914++0x03
line.long 0x00 "PTC1FPR,Port Traffic Class 1 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1918++0x03
line.long 0x00 "PTC2FPR,Port Traffic Class 2 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x191C++0x03
line.long 0x00 "PTC3FPR,Port Traffic Class 3 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1920++0x03
line.long 0x00 "PTC4FPR,Port Traffic Class 4 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1924++0x03
line.long 0x00 "PTC5FPR,Port Traffic Class 5 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1928++0x03
line.long 0x00 "PTC6FPR,Port Traffic Class 6 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x192C++0x03
line.long 0x00 "PTC7FPR,Port Traffic Class 7 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1A00++0x03
line.long 0x00 "PTGCR,Port Time Gating Control Register"
bitfld.long 0x00 31. "TGE,Time gating enable" "Disabled,Enabled"
bitfld.long 0x00 30. "TGPE,Time gate fusing disable" "No,Yes"
newline
bitfld.long 0x00 29. "TG_DROP_DISABLE,Time gate drop disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "HOLD_ADVANCE,Hold-advance value"
rgroup.long 0x1A08++0x03
line.long 0x00 "PTGCAPR,Port Time Gating Capability Register"
hexmask.long.word 0x00 0.--15. 1. "MAX_GCL_LEN,Max time gating (Qbv) gate control list length"
rgroup.long 0x1A10++0x13
line.long 0x00 "PTGAGLSR,Port Time Gating Admin Gate List Status Register"
bitfld.long 0x00 1. "CFG_PEND,New configuration processed" "Completed,Pending"
bitfld.long 0x00 0. "TG,Time gated" "Not active,Active"
line.long 0x04 "PTGAGLLR,Port Time Gating Admin Gate List Length Register"
hexmask.long.word 0x04 0.--15. 1. "ADMIN_GATE_LIST_LENGTH,Administrative gate list length"
line.long 0x08 "PTGOGLSR,Port Time Gating Operational Gate List Status Register"
hexmask.long.word 0x08 0.--15. 1. "CURR_POS,Current position in the operational gate list table"
line.long 0x0C "PTGOGLLR,Port Time Gating Operational Gate List Length Register"
hexmask.long.word 0x0C 0.--15. 1. "OPER_GATE_LIST_LENGTH,Operation gate list length"
line.long 0x10 "PTGLDFCR,Port Time Gating Late Discarded Frame Count Register"
group.long 0x1A24++0x03
line.long 0x00 "PESMATOR,Port Egress Selection Manager Advance Time Offset Register"
hexmask.long.word 0x00 0.--15. 0x01 "ADV_TIME_OFFSET,Advance time offset"
repeat 8. (increment 0x1A44 0x10)(increment 0. 1.)
rgroup.long $1++0x0B
line.long 0x00 "PTC$2TGSR,Port Traffic Class $2 Time Gating Status Register"
bitfld.long 0x00 0. "CURR_STATE,Current gate state" "Closed,Open"
line.long 0x04 "PTC$2TGTOCR0,Port Traffic Class $2 Time Gating Transmission Overrun Counter Register 0"
line.long 0x08 "PTC$2TGTOCR1,Port Traffic Class $2 Time Gating Transmission Overrun Counter"
repeat.end
group.long 0x1B00++0x03
line.long 0x00 "PPSFPMR,Port Per-Stream Filtering And Policing Mode Register"
bitfld.long 0x00 3. "PVZC,Port VLAN zero control" "Ignored,Accepted"
bitfld.long 0x00 2. "PVC,Port VLAN control" "Ignored (untagged),Accepted"
newline
bitfld.long 0x00 1. "VS,Per-stream filtering and policing (PSFP) VLAN selection" "Inner,Outer"
bitfld.long 0x00 0. "PSFPE,Per-stream filtering and policing (PSFP) enable" "Disabled,Enabled"
rgroup.long 0x1B08++0x03
line.long 0x00 "PSIDCAPR,Port Stream Identity Capability Register"
hexmask.long.word 0x00 0.--15. 1. "SIDIT_ENTRIES,Maximum number of stream identity instance table entries"
rgroup.long 0x1B18++0x03
line.long 0x00 "PSFCAPR,Port Stream Filter Capability Register"
hexmask.long.word 0x00 0.--15. 1. "SFIT_ENTRIES,Maximum number of stream filter instance table entries"
rgroup.long 0x1B28++0x03
line.long 0x00 "PSGCAPR,Port Stream Gating Capability Register"
bitfld.long 0x00 16.--18. "GC_LEN,Stream gate control list size (Qci)" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--15. 1. "SGIT_ENTRIES,Maximum number of stream gate instance table entries"
group.long 0x1B30++0x03
line.long 0x00 "PFMCR,Port Flow Meter Control Register"
hexmask.long.byte 0x00 0.--7. 1. "OAL,Overhead accounting length"
rgroup.long 0x1B38++0x03
line.long 0x00 "PFMCAPR,Port Flow Meter Capability Register"
hexmask.long.word 0x00 0.--15. 1. "NUM_FM_INST,Number of flow meters instances in the flow meter instance table"
group.long 0x1D00++0x0F
line.long 0x00 "PSI0UMHFR0,Port Station Interface 0 Unicast MAC Hash Filter Register 0"
line.long 0x04 "PSI0UMHFR1,Port Station Interface 0 Unicast MAC Hash Filter Register 1"
line.long 0x08 "PSI0MMHFR0,Port Station Interface 0 Multicast MAC Hash Filter Register 0"
line.long 0x0C "PSI0MMHFR1,Port Station Interface 0 Multicast MAC Hash Filter Register 1"
group.long 0x1D10++0x0F
line.long 0x00 "PSI1UMHFR0,Port Station Interface 1 Unicast MAC Hash Filter Register 0"
line.long 0x04 "PSI1UMHFR1,Port Station Interface 1 Unicast MAC Hash Filter Register 1"
line.long 0x08 "PSI1MMHFR0,Port Station Interface 1 Multicast MAC Hash Filter Register 0"
line.long 0x0C "PSI1MMHFR1,Port Station Interface 1 Multicast MAC Hash Filter Register 1"
group.long 0x1D20++0x0F
line.long 0x00 "PSI2UMHFR0,Port Station Interface 2 Unicast MAC Hash Filter Register 0"
line.long 0x04 "PSI2UMHFR1,Port Station Interface 2 Unicast MAC Hash Filter Register 1"
line.long 0x08 "PSI2MMHFR0,Port Station Interface 2 Multicast MAC Hash Filter Register 0"
line.long 0x0C "PSI2MMHFR1,Port Station Interface 2 Multicast MAC Hash Filter Register 1"
group.long 0x1E00++0x07
line.long 0x00 "PSI0VHFR0,Port Station Interface 0 VLAN Hash Filter Register 0"
line.long 0x04 "PSI0VHFR1,Port Station Interface 0 VLAN Hash Filter Register 1"
group.long 0x1E08++0x07
line.long 0x00 "PSI1VHFR0,Port Station Interface 1 VLAN Hash Filter Register 0"
line.long 0x04 "PSI1VHFR1,Port Station Interface 1 VLAN Hash Filter Register 1"
group.long 0x1E10++0x07
line.long 0x00 "PSI2VHFR0,Port Station Interface 2 VLAN Hash Filter Register 0"
line.long 0x04 "PSI2VHFR1,Port Station Interface 2 VLAN Hash Filter Register 1"
group.long 0x1F00++0x03
line.long 0x00 "MAC_MERGE_MMCSR,Port MAC Merge Control And Status Register"
bitfld.long 0x00 31. "LINK_FAIL,Link fail" "Not failed,Failed"
hexmask.long.word 0x00 23.--29. 1. "VT,Verify time"
newline
rbitfld.long 0x00 21.--22. "TXSTS,Merge status" "Inactive,Active,?..."
rbitfld.long 0x00 18.--20. "VSTS,Verify status" "Disabled,,In progress,Successful,Failed,Undefined state,?..."
newline
bitfld.long 0x00 17. "VDIS,Verify disabled" "No,Yes"
bitfld.long 0x00 16. "ME,Merge enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 8.--9. "RAFS,Remote additional fragment size" "0,1,2,3"
bitfld.long 0x00 7. "RPA,Remote preemption active" "Inactive,Active"
newline
bitfld.long 0x00 6. "RPE,Remote preemption enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "RPS,Remote preemption supported" "Not supported,Supported"
newline
rbitfld.long 0x00 3.--4. "LAFS,Local additional fragment size" "0,1,2,3"
rbitfld.long 0x00 2. "LPA,Local preemption active" "Inactive,Active"
newline
rbitfld.long 0x00 1. "LPE,Local preemption enabled" "Disabled,Enabled"
rbitfld.long 0x00 0. "LPS,Local preemption supported" "Not supported,Supported"
group.long 0x1F08++0x17
line.long 0x00 "MAC_MERGE_MMFAECR,Port MAC Merge Frame Assembly Error Count Register"
line.long 0x04 "MAC_MERGE_MMFSECR,Port MAC Merge Frame SMD Error Count Register"
line.long 0x08 "MAC_MERGE_MMFAOCR,Port MAC Merge Frame Assembly OK Count Register"
line.long 0x0C "MAC_MERGE_MMFCRXR,Port MAC Merge Fragment Count RX Register"
line.long 0x10 "MAC_MERGE_MMFCTXR,Part MAC Merge Fragment Count TX Register"
line.long 0x14 "MAC_MERGE_MMHCR,Port MAC Merge Hold Count Register"
repeat 8. (increment 0x2020 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PTC$2MSDUR,Port Traffic Class $2 Maximum SDU Register"
hexmask.long.word 0x00 0.--15. 1. "MAXSDU,Maximum SDU"
repeat.end
group.long 0x3000++0x03
line.long 0x00 "PAR_VXLAN_DP,VXLAN DP Configuration"
hexmask.long.word 0x00 16.--31. 1. "VXLAN_DP_1,Configured VXLAN DP 1"
hexmask.long.word 0x00 0.--15. 1. "VXLAN_DP_2,Configured VXLAN DP 2"
group.long 0x3024++0x03
line.long 0x00 "PAR_UDP_IPSEC,UDP IPsec"
bitfld.long 0x00 29. "SPPR,Short packet padding removal from checksum calculation" "Not removed,Removed"
repeat 4. (increment 0x303C 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PAR_CUSTETYPE$2,CustEtype $2"
hexmask.long.word 0x00 16.--31. 1. "ETYPE,ETYPE"
bitfld.long 0x00 5. "EN,Detection and mapping enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--3. "CP,Non IP code point" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x3050++0x03
line.long 0x00 "PAR_PORT_CFG,Port Configuration"
bitfld.long 0x00 1. "L3CD,Layer 3 checksum disable" "No,Yes"
bitfld.long 0x00 0. "L4CD,Layer 4 checksum disable" "No,Yes"
group.long 0x8008++0x03
line.long 0x00 "PM0_COMMAND_CONFIG,Port MAC 0 Command And Configuration Register"
bitfld.long 0x00 31. "MG,Magic packet detection enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RXSTP,Rx stop" "Not stopped,Stopped"
newline
bitfld.long 0x00 24. "REG_LOWP_RXETY,Rx low power indication assert" "Low Power Idle,FIFO empty"
bitfld.long 0x00 23. "TX_LOWP_ENA,Transmit low power idle enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "SFD,SFD character check disable at frame start" "No,Yes"
bitfld.long 0x00 17. "NO_LEN_CHK,Payload length check disable" "No,Yes"
newline
bitfld.long 0x00 16. "SEND_IDLE,Frame transmissions suppress and force IDLE" "Not sent,Sent"
bitfld.long 0x00 13. "CNT_FRM_EN,Control frame reception enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "SWR,Software reset" "No reset,Reset"
bitfld.long 0x00 11. "TXP,Padding of frames in transmit direction enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "XGLP,XGMII/GMII loopback enable" "Disabled,Enabled"
bitfld.long 0x00 9. "TX_ADDR_INS,Transmit source MAC address insertion" "Transmit,Overwrite"
newline
bitfld.long 0x00 8. "PAUSE_IGN,Ignore pause frame quanta" "Not ignored,Ignored"
bitfld.long 0x00 7. "PAUSE_FWD,Terminate/forward received pause frames" "Terminated,Forwarded"
newline
bitfld.long 0x00 6. "CRC,Terminate/forward CRC of received frames" "Terminated,Forwarded"
bitfld.long 0x00 5. "PAD,Frame padding removal in receive path enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "PROMIS,Promiscuous operation enable" "Disabled,Enabled"
bitfld.long 0x00 3. "WAN,WAN mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "RX_EN,MAC receive path enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_EN,MAC transmit path enable" "Disabled,Enabled"
group.long 0x9008++0x03
line.long 0x00 "PM1_COMMAND_CONFIG,Port MAC 1 Command And Configuration Register"
bitfld.long 0x00 31. "MG,Magic packet detection enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RXSTP,Rx stop" "Not stopped,Stopped"
newline
bitfld.long 0x00 24. "REG_LOWP_RXETY,Rx low power indication assert" "Low Power Idle,FIFO empty"
bitfld.long 0x00 23. "TX_LOWP_ENA,Transmit low power idle enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "SFD,SFD character check disable at frame start" "No,Yes"
bitfld.long 0x00 17. "NO_LEN_CHK,Payload length check disable" "No,Yes"
newline
bitfld.long 0x00 16. "SEND_IDLE,Frame transmissions suppress and force IDLE" "Not sent,Sent"
bitfld.long 0x00 13. "CNT_FRM_EN,Control frame reception enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "SWR,Software reset" "No reset,Reset"
bitfld.long 0x00 11. "TXP,Padding of frames in transmit direction enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "XGLP,XGMII/GMII loopback enable" "Disabled,Enabled"
bitfld.long 0x00 9. "TX_ADDR_INS,Transmit source MAC address insertion" "Transmit,Overwrite"
newline
bitfld.long 0x00 8. "PAUSE_IGN,Ignore pause frame quanta" "Not ignored,Ignored"
bitfld.long 0x00 7. "PAUSE_FWD,Terminate/forward received pause frames" "Terminated,Forwarded"
newline
bitfld.long 0x00 6. "CRC,Terminate/forward CRC of received frames" "Terminated,Forwarded"
bitfld.long 0x00 5. "PAD,Frame padding removal in receive path enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "PROMIS,Promiscuous operation enable" "Disabled,Enabled"
bitfld.long 0x00 3. "WAN,WAN mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "RX_EN,MAC receive path enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_EN,MAC transmit path enable" "Disabled,Enabled"
group.long 0x8014++0x03
line.long 0x00 "PM0_MAXFRM,Port MAC 0 Maximum Frame Length Register"
hexmask.long.word 0x00 16.--31. 1. "TX_MTU,Maximum length on transmit"
hexmask.long.word 0x00 0.--15. 1. "MAXFRM,Maximum supported received frame length"
group.long 0x9014++0x03
line.long 0x00 "PM1_MAXFRM,Port MAC 1 Maximum Frame Length Register"
hexmask.long.word 0x00 16.--31. 1. "TX_MTU,Maximum length on transmit"
hexmask.long.word 0x00 0.--15. 1. "MAXFRM,Maximum supported received frame length"
group.long 0x801C++0x03
line.long 0x00 "PM0_RX_FIFO_SECTIONS,Port MAC a Receive FIFO Threshold Configuration Register"
bitfld.long 0x00 16.--20. "RX_SECTION_AVAIL,Receive FIFO available" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x901C++0x03
line.long 0x00 "PM1_RX_FIFO_SECTIONS,Port MAC a Receive FIFO Threshold Configuration Register"
bitfld.long 0x00 16.--20. "RX_SECTION_AVAIL,Receive FIFO available" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x8030++0x0B
line.long 0x00 "PM0_MDIO_CFG,Port MAC 0 Internal MDIO Configuration Register"
rbitfld.long 0x00 31. "BSY1,MDIO busy" "Idle,Busy"
eventfld.long 0x00 30. "CMP,MDIO command completion event" "Not occurred,Occurred"
newline
bitfld.long 0x00 29. "CIM,MDIO command completion interrupt mask" "Masked,Enabled"
rbitfld.long 0x00 23. "NEG,MDIO driven by master on MDC negative edge" "Not driven,Driven"
newline
rbitfld.long 0x00 22. "EHOLD,External MDIO hold time (enet_clk cycles)" "Internal,External"
hexmask.long.word 0x00 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor"
newline
bitfld.long 0x00 6. "ENC45,Clause 45 support enable" "Disabled,Enabled"
bitfld.long 0x00 5. "PRE_DIS,MDIO preamble disable" "No,Yes"
newline
bitfld.long 0x00 2.--4. "MDIO_HOLD,MDIO hold time (enet_clk cycles)" "1,3,5,7,9,11,13,15"
rbitfld.long 0x00 0. "BSY2,MDIO busy" "Idle,Busy"
line.long 0x04 "PM0_MDIO_CTL,Port MAC 0 Internal MDIO Interface Control Register"
rbitfld.long 0x04 31. "BSY,MDIO busy" "Idle,Busy"
bitfld.long 0x04 15. "READ,MDIO read initiation" ",Initiated"
newline
bitfld.long 0x04 14. "POST_INC,MDIO read with address post-increment initiation" "Not initiated,Initiated"
bitfld.long 0x04 5.--9. "PORT_ADDR,MDIO port address (clause 45)/PHY address (clause 22)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x04 0.--4. "DEV_ADDR,MDIO device address (clause 45)/Register address (clause 22)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x08 "PM0_MDIO_DATA,Port MAC 0 Internal MDIO Interface Data Register"
rbitfld.long 0x08 31. "BSY,MDIO busy" "Idle,Busy"
hexmask.long.word 0x08 0.--15. 1. "MDIO_DATA,MDIO data (16-bit)"
wgroup.long 0x803C++0x03
line.long 0x00 "PM0_MDIO_ADDR,Port MAC 0 Internal MDIO Register Address Register"
group.long 0x8040++0x07
line.long 0x00 "PM0_IEVENT,Port MAC 0 Interrupt Event Register"
eventfld.long 0x00 31. "LT,XGMII - link training event" "Not received,Received"
eventfld.long 0x00 30. "AN,XGMII - auto negotiation event" "Not occurred,Occurred"
newline
eventfld.long 0x00 29. "PCS,XGMII - PCS event" "Not occurred,Occurred"
eventfld.long 0x00 14. "MGI,Magic packet detection indication event" "Not detected,Detected"
newline
eventfld.long 0x00 12. "RX_OVFL,Receive FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 11. "TX_UNFL,Transmit FIFO underflow event" "Not underflowed,Underflowed"
newline
eventfld.long 0x00 10. "TX_OVFL,Transmit FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 7. "LI_FAULT,Link interruption fault event (XGMII)" "Not occurred,Occurred"
newline
rbitfld.long 0x00 6. "RX_EMPTY,Receive FIFO empty event" "Not occurred,Occurred"
rbitfld.long 0x00 5. "TX_EMPTY,Transmit FIFO empty event" "Not occurred,Occurred"
newline
rbitfld.long 0x00 4. "RX_LOWP,Low power idle event" "Not occurred,Occurred"
eventfld.long 0x00 2. "PHY_LOS,Phy loss of signal event" "Not occurred,Occurred"
newline
eventfld.long 0x00 1. "REM_FAULT,Remote fault event (XGMII)" "Not occurred,Occurred"
eventfld.long 0x00 0. "LOC_FAULT,Local fault event (XGMII)" "Not occurred,Occurred"
line.long 0x04 "PM0_TX_IPG_LENGTH,Port MAC 0 Transmit Inter-Packet Gap Length Register"
hexmask.long.byte 0x04 0.--6. 1. "IPG_LEN,Transmit inter-packet gap value"
group.long (0x8040+0x0C)++0x03
line.long 0x00 "PM0_IMASK,Port MAC 0 Interrupt Mask Register"
bitfld.long 0x00 30. "MGI,Magic packet detection indication normal interrupt mask" "Masked,Enabled"
bitfld.long 0x00 15. "PCS,XGMII - PCS event interrupt mask" "Masked,Enabled"
newline
bitfld.long 0x00 14. "AN,XGMII - auto negotiation event interrupt mask" "Masked,Enabled"
bitfld.long 0x00 13. "LT,XGMII - link training event interrupt mask" "Masked,Enabled"
group.long (0x8040+0x14)++0x03
line.long 0x00 "PM0_PAUSE_QUANTA,Port MAC 0 Pause Quanta Register"
hexmask.long.word 0x00 0.--15. 1. "PQNT,Quanta value used when XOFF is triggered"
group.long (0x8040+0x24)++0x03
line.long 0x00 "PM0_PAUSE_THRESH,Port MAC 0 Pause Quanta Threshold Register"
hexmask.long.word 0x00 0.--15. 1. "QTH,Refresh pause frame sending value"
group.long (0x8040+0x34)++0x03
line.long 0x00 "PM0_RX_PAUSE_STATUS,Port MAC 0 Receive Pause Status Register"
rbitfld.long 0x00 0. "PSTAT,Pause status" "Not paused,Paused"
group.long (0x8040+0x78)++0x0F
line.long 0x00 "PM0_LPWAKE_TIMER,Port MAC 0 EEE Low Power Wakeup Timer Register"
hexmask.long.tbyte 0x00 0.--23. 1. "TW_SYS_TX,Enet_clk cycles number required by PHY"
line.long 0x04 "PM0_SLEEP_TIMER,Port MAC 0 Transmit EEE Low Power Timer Register"
hexmask.long.tbyte 0x04 0.--23. 1. "SLEEPT,Enet_clk cycles number where Tx is idle"
line.long 0x08 "PM0_SINGLE_STEP,Port MAC 0 IEEE1588 Single-Step Control Register"
bitfld.long 0x08 31. "EN,IEEE-1588 single-step enable" "Disabled,Enabled"
hexmask.long.byte 0x08 8.--15. 0x01 "OFFSET,Start offset from the beginning of a frame"
newline
bitfld.long 0x08 7. "CH,Checksum update" "Not required,Required"
line.long 0x0C "PM0_PEER_DELAY,Port MAC 0 IEEE1588 Single-Step Peer Delay Register"
hexmask.long 0x0C 0.--29. 1. "PEERDELAY,Value added to the correction field in addition to the transient time update"
group.long (0x8040+0xA0)++0x03
line.long 0x00 "PM0_STATN_CONFIG,Port MAC 0 Statistics Configuration Register"
eventfld.long 0x00 2. "CLR,Reset all counters" "No reset,Reset"
bitfld.long 0x00 1. "COD,Counter reset by read" "No reset,Reset"
newline
bitfld.long 0x00 0. "SAT,Saturate counters" "No,Yes"
group.long 0x9040++0x07
line.long 0x00 "PM1_IEVENT,Port MAC 1 Interrupt Event Register"
eventfld.long 0x00 31. "LT,XGMII - link training event" "Not received,Received"
eventfld.long 0x00 30. "AN,XGMII - auto negotiation event" "Not occurred,Occurred"
newline
eventfld.long 0x00 29. "PCS,XGMII - PCS event" "Not occurred,Occurred"
eventfld.long 0x00 14. "MGI,Magic packet detection indication event" "Not detected,Detected"
newline
eventfld.long 0x00 12. "RX_OVFL,Receive FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 11. "TX_UNFL,Transmit FIFO underflow event" "Not underflowed,Underflowed"
newline
eventfld.long 0x00 10. "TX_OVFL,Transmit FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 7. "LI_FAULT,Link interruption fault event (XGMII)" "Not occurred,Occurred"
newline
rbitfld.long 0x00 6. "RX_EMPTY,Receive FIFO empty event" "Not occurred,Occurred"
rbitfld.long 0x00 5. "TX_EMPTY,Transmit FIFO empty event" "Not occurred,Occurred"
newline
rbitfld.long 0x00 4. "RX_LOWP,Low power idle event" "Not occurred,Occurred"
eventfld.long 0x00 2. "PHY_LOS,Phy loss of signal event" "Not occurred,Occurred"
newline
eventfld.long 0x00 1. "REM_FAULT,Remote fault event (XGMII)" "Not occurred,Occurred"
eventfld.long 0x00 0. "LOC_FAULT,Local fault event (XGMII)" "Not occurred,Occurred"
line.long 0x04 "PM1_TX_IPG_LENGTH,Port MAC 1 Transmit Inter-Packet Gap Length Register"
hexmask.long.byte 0x04 0.--6. 1. "IPG_LEN,Transmit inter-packet gap value"
group.long (0x9040+0x0C)++0x03
line.long 0x00 "PM1_IMASK,Port MAC 1 Interrupt Mask Register"
bitfld.long 0x00 30. "MGI,Magic packet detection indication normal interrupt mask" "Masked,Enabled"
bitfld.long 0x00 15. "PCS,XGMII - PCS event interrupt mask" "Masked,Enabled"
newline
bitfld.long 0x00 14. "AN,XGMII - auto negotiation event interrupt mask" "Masked,Enabled"
bitfld.long 0x00 13. "LT,XGMII - link training event interrupt mask" "Masked,Enabled"
group.long (0x9040+0x14)++0x03
line.long 0x00 "PM1_PAUSE_QUANTA,Port MAC 1 Pause Quanta Register"
hexmask.long.word 0x00 0.--15. 1. "PQNT,Quanta value used when XOFF is triggered"
group.long (0x9040+0x24)++0x03
line.long 0x00 "PM1_PAUSE_THRESH,Port MAC 1 Pause Quanta Threshold Register"
hexmask.long.word 0x00 0.--15. 1. "QTH,Refresh pause frame sending value"
group.long (0x9040+0x34)++0x03
line.long 0x00 "PM1_RX_PAUSE_STATUS,Port MAC 1 Receive Pause Status Register"
rbitfld.long 0x00 0. "PSTAT,Pause status" "Not paused,Paused"
group.long (0x9040+0x78)++0x0F
line.long 0x00 "PM1_LPWAKE_TIMER,Port MAC 1 EEE Low Power Wakeup Timer Register"
hexmask.long.tbyte 0x00 0.--23. 1. "TW_SYS_TX,Enet_clk cycles number required by PHY"
line.long 0x04 "PM1_SLEEP_TIMER,Port MAC 1 Transmit EEE Low Power Timer Register"
hexmask.long.tbyte 0x04 0.--23. 1. "SLEEPT,Enet_clk cycles number where Tx is idle"
line.long 0x08 "PM1_SINGLE_STEP,Port MAC 1 IEEE1588 Single-Step Control Register"
bitfld.long 0x08 31. "EN,IEEE-1588 single-step enable" "Disabled,Enabled"
hexmask.long.byte 0x08 8.--15. 0x01 "OFFSET,Start offset from the beginning of a frame"
newline
bitfld.long 0x08 7. "CH,Checksum update" "Not required,Required"
line.long 0x0C "PM1_PEER_DELAY,Port MAC 1 IEEE1588 Single-Step Peer Delay Register"
hexmask.long 0x0C 0.--29. 1. "PEERDELAY,Value added to the correction field in addition to the transient time update"
group.long (0x9040+0xA0)++0x03
line.long 0x00 "PM1_STATN_CONFIG,Port MAC 1 Statistics Configuration Register"
eventfld.long 0x00 2. "CLR,Reset all counters" "No reset,Reset"
bitfld.long 0x00 1. "COD,Counter reset by read" "No reset,Reset"
newline
bitfld.long 0x00 0. "SAT,Saturate counters" "No,Yes"
rgroup.quad 0x8100++0xCF
line.quad 0x00 "PM0_REOCTN,Port MAC 0 Receive Ethernet Octets Counter Register"
line.quad 0x08 "PM0_ROCTN,Port MAC 0 Receive Octets Counter Register"
line.quad 0x10 "PM0_RALNN,Port MAC 0 Receive Alignment Error Counter Register"
line.quad 0x18 "PM0_RXPFN,Port MAC 0 Receive Valid Pause Frame Counter Register"
line.quad 0x20 "PM0_RFRMN,Port MAC 0 Receive Frame Counter Register"
line.quad 0x28 "PM0_RFCSN,Port MAC 0 Receive Frame Check Sequence Error Counter Register"
line.quad 0x30 "PM0_RVLANN,Port MAC 0 Receive VLAN Frame Counter Register"
line.quad 0x38 "PM0_RERRN,Port MAC 0 Receive Frame Error Counter Register"
line.quad 0x40 "PM0_RUCAN,Port MAC 0 Receive Unicast Frame Counter Register"
line.quad 0x48 "PM0_RMCAN,Port MAC 0 Receive Multicast Frame Counter Register"
line.quad 0x50 "PM0_RBCAN,Port MAC 0 Receive Broadcast Frame Counter Register"
line.quad 0x58 "PM0_RDRPN,Port MAC 0 Receive Dropped Packets Counter Register"
line.quad 0x60 "PM0_RPKTN,Port MAC 0 Receive Packets Counter Register"
line.quad 0x68 "PM0_RUNDN,Port MAC 0 Receive Undersized Packet Counter Register"
line.quad 0x70 "PM0_R64N,Port MAC 0 Receive 64-Octet Packet Counter Register"
line.quad 0x78 "PM0_R127N,Port MAC 0 Receive 65 to 127-Octet Packet Counter Register"
line.quad 0x80 "PM0_R255N,Port MAC 0 Receive 128 To 255-Octet Packet Counter Register"
line.quad 0x88 "PM0_R511N,Port MAC 0 Receive 256 To 511-Octet Packet Counter Register"
line.quad 0x90 "PM0_R1023N,Port MAC 0 Receive 512 To 1023-Octet Packet Counter Register"
line.quad 0x98 "PM0_R1522N,Port MAC 0 Receive 1024 To 1522-Octet Packet Counter Register"
line.quad 0xA0 "PM0_R1523XN,Port MAC 0 Receive 1523 To Max-Octet Packet Counter Register"
line.quad 0xA8 "PM0_ROVRN,Port MAC 0 Receive Oversized Packet Counter Register"
line.quad 0xB0 "PM0_RJBRN,Port MAC 0 Receive Jabber Packet Counter Register"
line.quad 0xB8 "PM0_RFRGN,Port MAC 0 Receive Fragment Packet Counter Register"
line.quad 0xC0 "PM0_RCNPN,Port MAC 0 Receive Control Packet Counter Register"
line.quad 0xC8 "PM0_RDRNTPN,Port MAC 0 Receive Dropped Not Truncated Packets Counter Register"
rgroup.quad (0x8100+0x100)++0x0F
line.quad 0x00 "PM0_TEOCTN,Port MAC 0 Transmit Ethernet Octets Counter Register"
line.quad 0x08 "PM0_TOCTN,Port MAC 0 Transmit Octets Counter Register"
rgroup.quad (0x8100+0x118)++0x3F
line.quad 0x00 "PM0_TXPFN,Port MAC 0 Transmit Valid Pause Frame Counter Register"
line.quad 0x08 "PM0_TFRMN,Port MAC 0 Transmit Frame Counter Register"
line.quad 0x10 "PM0_TFCSN,Port MAC 0 Transmit Frame Check Sequence Error Counter"
line.quad 0x18 "PM0_TVLANN,Port MAC 0 Transmit VLAN Frame Counter Register"
line.quad 0x20 "PM0_TERRN,Port MAC 0 Transmit Frame Error Counter Register"
line.quad 0x28 "PM0_TUCAN,Port MAC 0 Transmit Unicast Frame Counter Register"
line.quad 0x30 "PM0_TMCAN,Port MAC 0 Transmit Multicast Frame Counter Register"
line.quad 0x38 "PM0_TBCAN,Port MAC 0 Transmit Broadcast Frame Counter Register"
rgroup.quad (0x8100+0x160)++0x47
line.quad 0x00 "PM0_TPKTN,Port MAC 0 Transmit Packets Counter Register"
line.quad 0x08 "PM0_TUNDN,Port MAC 0 Transmit Undersized Packet Counter Register"
line.quad 0x10 "PM0_T64N,Port MAC 0 Transmit 64-Octet Packet Counter Register"
line.quad 0x18 "PM0_T127N,Port MAC 0 Transmit 65 To 127-Octet Packet Counter Register"
line.quad 0x20 "PM0_T255N,Port MAC 0 Transmit 128 To 255-Octet Packet Counter Register"
line.quad 0x28 "PM0_T511N,Port MAC 0 Transmit 256 To 511-Octet Packet Counter Register"
line.quad 0x30 "PM0_T1023N,Port MAC 0 Transmit 512 To 1023-Octet Packet Counter Register"
line.quad 0x38 "PM0_T1522N,Port MAC 0 Transmit 1024 To 1522-Octet Packet Counter Register"
line.quad 0x40 "PM0_T1523N,Port MAC 0 Transmit 1523 To TX_MTU-Octet Packet Counter Register"
rgroup.quad (0x8100+0x1C0)++0x07
line.quad 0x00 "PM0_TCNPN,Port MAC 0 Transmit Control Packet Counter Register"
rgroup.quad 0x9100++0xCF
line.quad 0x00 "PM1_REOCTN,Port MAC 1 Receive Ethernet Octets Counter Register"
line.quad 0x08 "PM1_ROCTN,Port MAC 1 Receive Octets Counter Register"
line.quad 0x10 "PM1_RALNN,Port MAC 1 Receive Alignment Error Counter Register"
line.quad 0x18 "PM1_RXPFN,Port MAC 1 Receive Valid Pause Frame Counter Register"
line.quad 0x20 "PM1_RFRMN,Port MAC 1 Receive Frame Counter Register"
line.quad 0x28 "PM1_RFCSN,Port MAC 1 Receive Frame Check Sequence Error Counter Register"
line.quad 0x30 "PM1_RVLANN,Port MAC 1 Receive VLAN Frame Counter Register"
line.quad 0x38 "PM1_RERRN,Port MAC 1 Receive Frame Error Counter Register"
line.quad 0x40 "PM1_RUCAN,Port MAC 1 Receive Unicast Frame Counter Register"
line.quad 0x48 "PM1_RMCAN,Port MAC 1 Receive Multicast Frame Counter Register"
line.quad 0x50 "PM1_RBCAN,Port MAC 1 Receive Broadcast Frame Counter Register"
line.quad 0x58 "PM1_RDRPN,Port MAC 1 Receive Dropped Packets Counter Register"
line.quad 0x60 "PM1_RPKTN,Port MAC 1 Receive Packets Counter Register"
line.quad 0x68 "PM1_RUNDN,Port MAC 1 Receive Undersized Packet Counter Register"
line.quad 0x70 "PM1_R64N,Port MAC 1 Receive 64-Octet Packet Counter Register"
line.quad 0x78 "PM1_R127N,Port MAC 1 Receive 65 to 127-Octet Packet Counter Register"
line.quad 0x80 "PM1_R255N,Port MAC 1 Receive 128 To 255-Octet Packet Counter Register"
line.quad 0x88 "PM1_R511N,Port MAC 1 Receive 256 To 511-Octet Packet Counter Register"
line.quad 0x90 "PM1_R1023N,Port MAC 1 Receive 512 To 1023-Octet Packet Counter Register"
line.quad 0x98 "PM1_R1522N,Port MAC 1 Receive 1024 To 1522-Octet Packet Counter Register"
line.quad 0xA0 "PM1_R1523XN,Port MAC 1 Receive 1523 To Max-Octet Packet Counter Register"
line.quad 0xA8 "PM1_ROVRN,Port MAC 1 Receive Oversized Packet Counter Register"
line.quad 0xB0 "PM1_RJBRN,Port MAC 1 Receive Jabber Packet Counter Register"
line.quad 0xB8 "PM1_RFRGN,Port MAC 1 Receive Fragment Packet Counter Register"
line.quad 0xC0 "PM1_RCNPN,Port MAC 1 Receive Control Packet Counter Register"
line.quad 0xC8 "PM1_RDRNTPN,Port MAC 1 Receive Dropped Not Truncated Packets Counter Register"
rgroup.quad (0x9100+0x100)++0x0F
line.quad 0x00 "PM1_TEOCTN,Port MAC 1 Transmit Ethernet Octets Counter Register"
line.quad 0x08 "PM1_TOCTN,Port MAC 1 Transmit Octets Counter Register"
rgroup.quad (0x9100+0x118)++0x3F
line.quad 0x00 "PM1_TXPFN,Port MAC 1 Transmit Valid Pause Frame Counter Register"
line.quad 0x08 "PM1_TFRMN,Port MAC 1 Transmit Frame Counter Register"
line.quad 0x10 "PM1_TFCSN,Port MAC 1 Transmit Frame Check Sequence Error Counter"
line.quad 0x18 "PM1_TVLANN,Port MAC 1 Transmit VLAN Frame Counter Register"
line.quad 0x20 "PM1_TERRN,Port MAC 1 Transmit Frame Error Counter Register"
line.quad 0x28 "PM1_TUCAN,Port MAC 1 Transmit Unicast Frame Counter Register"
line.quad 0x30 "PM1_TMCAN,Port MAC 1 Transmit Multicast Frame Counter Register"
line.quad 0x38 "PM1_TBCAN,Port MAC 1 Transmit Broadcast Frame Counter Register"
rgroup.quad (0x9100+0x160)++0x47
line.quad 0x00 "PM1_TPKTN,Port MAC 1 Transmit Packets Counter Register"
line.quad 0x08 "PM1_TUNDN,Port MAC 1 Transmit Undersized Packet Counter Register"
line.quad 0x10 "PM1_T64N,Port MAC 1 Transmit 64-Octet Packet Counter Register"
line.quad 0x18 "PM1_T127N,Port MAC 1 Transmit 65 To 127-Octet Packet Counter Register"
line.quad 0x20 "PM1_T255N,Port MAC 1 Transmit 128 To 255-Octet Packet Counter Register"
line.quad 0x28 "PM1_T511N,Port MAC 1 Transmit 256 To 511-Octet Packet Counter Register"
line.quad 0x30 "PM1_T1023N,Port MAC 1 Transmit 512 To 1023-Octet Packet Counter Register"
line.quad 0x38 "PM1_T1522N,Port MAC 1 Transmit 1024 To 1522-Octet Packet Counter Register"
line.quad 0x40 "PM1_T1523N,Port MAC 1 Transmit 1523 To TX_MTU-Octet Packet Counter Register"
rgroup.quad (0x9100+0x1C0)++0x07
line.quad 0x00 "PM1_TCNPN,Port MAC 1 Transmit Control Packet Counter Register"
if (((per.l(ad:0x1F8000000+0x8300))&0x8000)==0x00)
group.long 0x8300++0x03
line.long 0x00 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 13.--14. "SSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "SFD,Full duplex RGMII mode force" ",Forced"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
else
group.long 0x8300++0x03
line.long 0x00 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
endif
rgroup.long 0x8304++0x03
line.long 0x00 "PM0_IF_STATUS,Port MAC 0 Interface Status Register"
bitfld.long 0x00 15. "RGLINK,Valid link established" "No,Yes"
bitfld.long 0x00 13.--14. "RGSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "RGFD,RGMII full duplex link established" "No link/Half-duplex,Full-duplex"
if (((per.l(ad:0x1F8000000+0x9300))&0x8000)==0x00)
group.long 0x9300++0x03
line.long 0x00 "PM1_IF_MODE,Port MAC 1 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 13.--14. "SSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "SFD,Full duplex RGMII mode force" "Not forced,Forced"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
else
group.long 0x9300++0x03
line.long 0x00 "PM1_IF_MODE,Port MAC 1 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
endif
rgroup.long 0x9304++0x03
line.long 0x00 "PM1_IF_STATUS,Port MAC 1 Interface Status Register"
bitfld.long 0x00 15. "RGLINK,Valid link established" "No,Yes"
bitfld.long 0x00 13.--14. "RGSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "RGFD,RGMII full duplex link established" "No link/Half-duplex,Full-duplex"
tree.end
tree "ENETC_PF1"
base ad:0x1F8040000
group.long 0x00++0x03
line.long 0x00 "PMR,Port Mode Register"
bitfld.long 0x00 18. "SI2EN,Station interface 2 enable" "Disabled,Enabled"
bitfld.long 0x00 17. "SI1EN,Station interface 1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "SI0EN,Station interface 0 enable" "Disabled,Enabled"
bitfld.long 0x00 8.--11. "PSPEED,Port speed" "10Mbps,100Mbps,1000Mbps,10Gbps,2.5Gbps,5Gbps,?..."
rgroup.long 0x04++0x03
line.long 0x00 "PSR,Port Status Register"
bitfld.long 0x00 1. "RX_BUSY,Receive busy" "Idle,Busy"
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
group.long 0x14++0x0B
line.long 0x00 "PPFALOR,Port Per-Frame Accounting Length Overhead Register"
bitfld.long 0x00 31. "PFALOE,Per-frame accounting length overhead enable" "Disabled,Enabled"
hexmask.long.byte 0x00 0.--7. 1. "BCO,Byte count overhead"
line.long 0x04 "PSIPMMR,Port Station Interface Promiscuous MAC Mode Register"
bitfld.long 0x04 18. "SI2_MAC_MP,SI 2 MAC multicast promiscuous" "Not qualified,Qualified"
bitfld.long 0x04 17. "SI1_MAC_MP,SI 1 MAC multicast promiscuous" "Not qualified,Qualified"
newline
bitfld.long 0x04 16. "SI0_MAC_MP,SI 0 MAC multicast promiscuous" "Not qualified,Qualified"
bitfld.long 0x04 2. "SI2_MAC_UP,SI 2 MAC unicast promiscuous" "Not qualified,Qualified"
newline
bitfld.long 0x04 1. "SI1_MAC_UP,SI 1 MAC unicast promiscuous" "Not qualified,Qualified"
bitfld.long 0x04 0. "SI0_MAC_UP,SI 0 MAC unicast promiscuous" "Not qualified,Qualified"
line.long 0x08 "PSIPVMR,Port Station Interface Promiscuous VLAN Mode Register"
bitfld.long 0x08 18. "SI2_VLAN_UTA,SI 2 untagged frames (no VLAN) accepted" "Not qualified,Qualified"
bitfld.long 0x08 17. "SI1_VLAN_UTA,SI 1 untagged frames (no VLAN) accepted" "Not qualified,Qualified"
newline
bitfld.long 0x08 16. "SI0_VLAN_UTA,SI 0 untagged frames (no VLAN) accepted" "Not qualified,Qualified"
bitfld.long 0x08 2. "SI2_VLAN_P,SI 2 VLAN promiscuous" "Not qualified,Qualified"
newline
bitfld.long 0x08 1. "SI1_VLAN_P,SI 1 VLAN promiscuous" "Not qualified,Qualified"
bitfld.long 0x08 0. "SI0_VLAN_P,SI 0 VLAN promiscuous" "Not qualified,Qualified"
group.long 0x100++0x03
line.long 0x00 "PSI0PMAR0,Port Station Interface 0 Primary MAC Address Register 0"
group.long 0x108++0x03
line.long 0x00 "PSI1PMAR0,Port Station Interface 1 Primary MAC Address Register 0"
group.long 0x110++0x03
line.long 0x00 "PSI2PMAR0,Port Station Interface 2 Primary MAC Address Register 0"
group.long 0x104++0x03
line.long 0x00 "PSI0PMAR1,Port Station Interface 0 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x10C++0x03
line.long 0x00 "PSI1PMAR1,Port Station Interface 1 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x114++0x03
line.long 0x00 "PSI2PMAR1,Port Station Interface 2 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x200++0x0B
line.long 0x00 "PONVLANR,Port Outer Native VLAN Register"
bitfld.long 0x00 19. "VZE,Port outer native VLAN VID used" "Not used,Used"
bitfld.long 0x00 18. "PNE,Port outer native VLAN used" "Not used,Used"
newline
bitfld.long 0x00 16.--17. "TPID,VLAN Ethertype used" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR.ETYPE"
bitfld.long 0x00 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI,Drop eligible indicator" "Not eligible,Eligible"
hexmask.long.word 0x00 0.--11. 1. "VID,VLAN identifier"
line.long 0x04 "PINVLANR,Port Inner Native VLAN Register"
bitfld.long 0x04 19. "VZE,Port outer native VLAN VID used" "Not used,Used"
bitfld.long 0x04 18. "PNE,Port outer native VLAN used" "Not used,Used"
newline
bitfld.long 0x04 16.--17. "TPID,VLAN Ethertype used" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR2.ETYPE"
bitfld.long 0x04 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12. "DEI,Drop eligible indicator" "Not eligible,Eligible"
hexmask.long.word 0x04 0.--11. 1. "VID,VLAN identifier"
line.long 0x08 "PVCLCTR,Port VLAN Classification Control Register"
bitfld.long 0x08 9. "OAI,Outer as inner" "Not used,Used"
bitfld.long 0x08 8. "IV2,Inner VLAN must be second" "Nth,2nd"
newline
bitfld.long 0x08 7. "IVTPIDL[3],Custom VLAN as defined by PCVLANR2.ETYPE acceptable as inner VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 6. "[2],Custom VLAN as defined by PCVLANR1.ETYPE acceptable as inner VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 5. "[1],Standard S-VLAN 0x88A8 acceptable as inner VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 4. "[0],Standard C-VLAN 0x8100 acceptable as inner VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 3. "OVTPIDL[3],Custom VLAN as defined by PCVLANR2.ETYPE acceptable as outer VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 2. "[2],Custom VLAN as defined by PCVLANR1.ETYPE acceptable as outer VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 1. "[1],Standard S-VLAN 0x88A8 acceptable as outer VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 0. "[0],Standard C-VLAN 0x8100 acceptable as outer VLAN tag" "Not accepted,Accepted"
repeat 2. (increment 0x210 0x04)(increment 1. 1.)
group.long $1++0x03
line.long 0x00 "PCVLANR$2,Port Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x240++0x03
line.long 0x00 "PSI1VLANR,Port Station Interface 1 VLAN Register"
bitfld.long 0x00 31. "E,SI-based VLAN enabled" "Disabled,Enabled"
bitfld.long 0x00 16.--17. "TPID,Tag protocol identifier" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR2.ETYPE"
newline
bitfld.long 0x00 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12. "DEI,Drop eligible indicator" "Not dropped,Dropped"
newline
hexmask.long.word 0x00 0.--11. 1. "VID,VLAN identifier"
group.long 0x244++0x03
line.long 0x00 "PSI2VLANR,Port Station Interface 2 VLAN Register"
bitfld.long 0x00 31. "E,SI-based VLAN enabled" "Disabled,Enabled"
bitfld.long 0x00 16.--17. "TPID,Tag protocol identifier" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR2.ETYPE"
newline
bitfld.long 0x00 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12. "DEI,Drop eligible indicator" "Not dropped,Dropped"
newline
hexmask.long.word 0x00 0.--11. 1. "VID,VLAN identifier"
group.long 0x408++0x03
line.long 0x00 "PQCMR,Port HTA QoS Congestion Mapping Register"
bitfld.long 0x00 21. "PRIORITY_MAP7,Mapping of priority value 7 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 18. "PRIORITY_MAP6,Mapping of priority value 6 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 15. "PRIORITY_MAP5,Mapping of priority value 5 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 12. "PRIORITY_MAP4,Mapping of priority value 4 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 9. "PRIORITY_MAP3,Mapping of priority value 3 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 6. "PRIORITY_MAP2,Mapping of priority value 2 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 3. "PRIORITY_MAP1,Mapping of priority value 1 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 0. "PRIORITY_MAP0,Mapping of priority value 0 to ICM receive port queue priority" "High,Low"
group.long 0x410++0x07
line.long 0x00 "PPAUONTR,Port Pause ON Threshold Register"
hexmask.long 0x00 0.--27. 1. "THRESH,Amount of data accumulated in the internal receive buffer"
line.long 0x04 "PPAUOFFTR,Port Pause OFF Threshold Register"
hexmask.long 0x04 0.--27. 1. "THRESH,Amount of data accumulated in the internal receive buffer"
group.long 0x500++0x03
line.long 0x00 "PQOSMR,Port QoS Mode Register"
bitfld.long 0x00 8. "DTE,DSCP QoS classification enabled for VLAN tagged IP frames" "Disabled,Enabled"
bitfld.long 0x00 7. "DUE,DSCP QoS classification enabled for untagged VLAN IP frames" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--6. "DIPV,Default IPV" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--3. "DDR,Default Discard Resilience" "0,1,2,3"
newline
bitfld.long 0x00 1. "VE,VLAN enable" "Disabled,Enabled"
bitfld.long 0x00 0. "VS,VLAN tag select" "Inner,Outer"
group.long 0x510++0x0B
line.long 0x00 "PVLANIPVMR0,Port VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for receive data path 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for receive data path 6" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for receive data path 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for receive data path 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for receive data path 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for receive data path 2" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for receive data path 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for receive data path 0" "0,1,2,3,4,5,6,7"
line.long 0x04 "PVLANIPVMR1,Port VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for receive data path 15" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for receive data path 14" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for receive data path 13" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for receive data path 12" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for receive data path 11" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for receive data path 10" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for receive data path 9" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for receive data path 8" "0,1,2,3,4,5,6,7"
line.long 0x08 "PVLANDRMR,Port VLAN To DR Mapping Register"
bitfld.long 0x08 30.--31. "PCP_DEI_15,DR value used for receive data path 15" "0,1,2,3"
bitfld.long 0x08 28.--29. "PCP_DEI_14,DR value used for receive data path 14" "0,1,2,3"
newline
bitfld.long 0x08 26.--27. "PCP_DEI_13,DR value used for receive data path 13" "0,1,2,3"
bitfld.long 0x08 24.--25. "PCP_DEI_12,DR value used for receive data path 12" "0,1,2,3"
newline
bitfld.long 0x08 22.--23. "PCP_DEI_11,DR value used for receive data path 11" "0,1,2,3"
bitfld.long 0x08 20.--21. "PCP_DEI_10,DR value used for receive data path 10" "0,1,2,3"
newline
bitfld.long 0x08 18.--19. "PCP_DEI_9,DR value used for receive data path 9" "0,1,2,3"
bitfld.long 0x08 16.--17. "PCP_DEI_8,DR value used for receive data path 8" "0,1,2,3"
newline
bitfld.long 0x08 14.--15. "PCP_DEI_7,DR value used for receive data path 7" "0,1,2,3"
bitfld.long 0x08 12.--13. "PCP_DEI_6,DR value used for receive data path 6" "0,1,2,3"
newline
bitfld.long 0x08 10.--11. "PCP_DEI_5,DR value used for receive data path 5" "0,1,2,3"
bitfld.long 0x08 8.--9. "PCP_DEI_4,DR value used for receive data path 4" "0,1,2,3"
newline
bitfld.long 0x08 6.--7. "PCP_DEI_3,DR value used for receive data path 3" "0,1,2,3"
bitfld.long 0x08 4.--5. "PCP_DEI_2,DR value used for receive data path 2" "0,1,2,3"
newline
bitfld.long 0x08 2.--3. "PCP_DEI_1,DR value used for receive data path 1" "0,1,2,3"
bitfld.long 0x08 0.--1. "PCP_DEI_0,DR value used for receive data path 0" "0,1,2,3"
rgroup.long 0x600++0x07
line.long 0x00 "PRXMBER,Port HTA Receive Memory Buffer Entitlement Register"
hexmask.long 0x00 0.--27. 1. "AMOUNT,Port receive memory buffer entitlement for each port (bytes)"
line.long 0x04 "PRXMBLR,Port HTA Receive Memory Buffer Limit Register"
hexmask.long 0x04 0.--27. 1. "LIMIT,Port receive memory buffer limit for each port (bytes)"
group.long 0x608++0x03
line.long 0x00 "PTXMBAR,Port HTA Transmit Memory Buffer Allocation Register"
hexmask.long 0x00 0.--27. 1. "ALLOC,Transmit buffer memory allocation for each port (bytes)"
rgroup.long 0x60C++0x03
line.long 0x00 "FMBDTR,Free Memory Buffer Depletion Threshold Register"
hexmask.long 0x00 0.--27. 1. "THRESH,Free buffer depletion threshold (bytes)"
rgroup.long 0x680++0x1F
line.long 0x00 "FMBCR,Free Memory Buffer Count Register"
line.long 0x04 "FMBCLWMR,Free Memory Buffer Count Low Watermark Register"
line.long 0x08 "UMBCR,Unassigned Memory Buffer Count Register"
line.long 0x0C "UMBCHWMR,Unassigned Memory Buffer Count High Watermark Register"
line.long 0x10 "PRXMBCR,Port HTA Receive Buffer Count Register"
hexmask.long 0x10 0.--27. 1. "COUNT,Current receive buffer usage count for this port (bytes)"
line.long 0x14 "PRXMBCHWMR,Port HTA Receive Buffer Count High Watermark Register"
hexmask.long 0x14 0.--27. 1. "WATERMARK,High watermark for receive buffer usage since the last read of this register (bytes)"
line.long 0x18 "PTXMBCR,Port HTA Transmit Memory Buffer Count Register"
hexmask.long 0x18 0.--27. 1. "COUNT,Current amount of transmit buffer memory in use (bytes)"
line.long 0x1C "PTXMBCHWMR,Port HTA Transmit Memory Buffer Count High Watermark"
hexmask.long 0x1C 0.--27. 1. "WATERMARK,High watermark for transmit buffer memory since the last read of this register (bytes)"
group.long 0x700++0x03
line.long 0x00 "PICDR0DCR,Port HTA Ingress Congestion DR0 Discard Count Register"
group.long 0x710++0x03
line.long 0x00 "PICDR1DCR,Port HTA Ingress Congestion DR1 Discard Count Register"
group.long 0x720++0x03
line.long 0x00 "PICDR2DCR,Port HTA Ingress Congestion DR2 Discard Count Register"
group.long 0x730++0x03
line.long 0x00 "PICDR3DCR,Port HTA Ingress Congestion DR3 Discard Count Register"
group.long 0x708++0x03
line.long 0x00 "PICDR0DCRRR,Port HTA Ingress Congestion DR0 Discard Count Read-Reset Register"
group.long 0x718++0x03
line.long 0x00 "PICDR1DCRRR,Port HTA Ingress Congestion DR1 Discard Count Read-Reset Register"
group.long 0x728++0x03
line.long 0x00 "PICDR2DCRRR,Port HTA Ingress Congestion DR2 Discard Count Read-Reset Register"
group.long 0x738++0x03
line.long 0x00 "PICDR3DCRRR,Port HTA Ingress Congestion DR3 Discard Count Read-Reset Register"
group.long 0x740++0x03
line.long 0x00 "PICPDSR,Port HTA Ingress Congestion Priority Discard Status Register"
eventfld.long 0x00 28. "DR3_P1DS,DR3 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 24. "DR3_P0DS,DR3 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 20. "DR2_P1DS,DR2 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 16. "DR2_P0DS,DR2 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 12. "DR1_P1DS,DR1 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 8. "DR1_P0DS,DR1 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 4. "DR0_P1DS,DR0 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 0. "DR0_P0DS,DR0 priority 0 discard status" "No clear,Clear"
rgroup.long 0x810++0x03
line.long 0x00 "PBFDSIR,Port Broadcast Frame Drop SI Rejection Register"
rgroup.long 0x900++0x07
line.long 0x00 "PCAPR0,Port Capability Register 0"
hexmask.long.byte 0x00 24.--31. 1. "NUM_RX_BDR,Number of total receive buffer descriptor rings for the port"
hexmask.long.byte 0x00 16.--23. 1. "NUM_TX_BDR,Number of total transmit buffer descriptor rings for the port"
newline
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
newline
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci (Per-Stream Filtering and Policing)" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci (Per-Stream Filtering and Policing)" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
newline
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating (IEEE 802.1Qbv)" "Not supported,Supported"
newline
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload (GRO) support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload (GSO) support" "Not supported,Supported"
line.long 0x04 "PCAPR1,Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1K,2K,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multi-cast hash entries per SI" "64,128,256,512"
newline
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1(0),2(0-1),3(0-2),4(0-3),5(0-4),6(0-5),7(0-6),8(0-7)"
group.long 0x940++0x03
line.long 0x00 "PSI0CFGR0,Port Station Interface 0 Configuration Register 0"
bitfld.long 0x00 28.--31. "SIBW,Station interface traffic class bandwidth weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "SIVC[3],Custom VLAN as defined by PCVLANR2.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 26. "[2],Custom VLAN as defined by PCVLANR1.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
bitfld.long 0x00 25. "[1],Standard S-VLAN 0x88A8 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 24. "[0],Standard C-VLAN 0x8100 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
newline
bitfld.long 0x00 15. "ASE,Anti-spoofing enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SIVIE,Software VLAN insertion enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SPE,Source pruning enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
group.long 0x94C++0x03
line.long 0x00 "PSI1CFGR0,Port Station Interface 1 Configuration Register 0"
bitfld.long 0x00 28.--31. "SIBW,Station interface traffic class bandwidth weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "SIVC[3],Custom VLAN as defined by PCVLANR2.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 26. "[2],Custom VLAN as defined by PCVLANR1.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
bitfld.long 0x00 25. "[1],Standard S-VLAN 0x88A8 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 24. "[0],Standard C-VLAN 0x8100 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
newline
bitfld.long 0x00 15. "ASE,Anti-spoofing enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SIVIE,Software VLAN insertion enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SPE,Source pruning enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
group.long 0x958++0x03
line.long 0x00 "PSI2CFGR0,Port Station Interface 2 Configuration Register 0"
bitfld.long 0x00 28.--31. "SIBW,Station interface traffic class bandwidth weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "SIVC[3],Custom VLAN as defined by PCVLANR2.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 26. "[2],Custom VLAN as defined by PCVLANR1.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
bitfld.long 0x00 25. "[1],Standard S-VLAN 0x88A8 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 24. "[0],Standard C-VLAN 0x8100 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
newline
bitfld.long 0x00 15. "ASE,Anti-spoofing enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SIVIE,Software VLAN insertion enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SPE,Source pruning enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
repeat 2. (increment 0x950 0x0C)(increment 1. 1.)
group.long $1++0x03
line.long 0x00 "PSI$2CFGR1,Port Station Interface $2 Configuration Register 1"
bitfld.long 0x00 28.--30. "TC7_MAP,Traffic class 7 mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "TC6_MAP,Traffic class 6 mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "TC5_MAP,Traffic class 5 mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "TC4_MAP,Traffic class 4 mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "TC3_MAP,Traffic class 3 mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "TC2_MAP,Traffic class 2 mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "TC1_MAP,Traffic class 1 mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "TC0_MAP,Traffic class 0 mapping" "0,1,2,3,4,5,6,7"
repeat.end
group.long 0xE10++0x03
line.long 0x00 "PCMEDR,Port Correctable Memory Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Invalid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "No error,Error"
newline
bitfld.long 0x00 29. "RGD,Report global disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE30++0x03
line.long 0x00 "PUMEDR,Port Uncorrectable Memory Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Invalid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "No error,Error"
newline
bitfld.long 0x00 29. "RGD,Report global disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0x1000++0x03
line.long 0x00 "PIPVTCMR0,Port HTA Tx IPV To Traffic Class Mapping Register 0"
bitfld.long 0x00 28.--30. "IPV7TC,IPV7 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6TC,IPV6 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "IPV5TC,IPV5 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4TC,IPV4 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3TC,IPV3 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2TC,IPV2 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "IPV1TC,IPV1 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0TC,IPV0 to traffic class mapping" "0,1,2,3,4,5,6,7"
repeat 8. (increment 0x1110 0x08)(increment 0. 1.)
group.long $1++0x07
line.long 0x00 "PTC$2CBSR0,Port Traffic Class $2 Credit Based Shaper Register 0"
bitfld.long 0x00 31. "CBSE,Credit based shaper enable" "Disabled,Enabled"
hexmask.long.byte 0x00 0.--6. 1. "BW,Bandwidth in percentage units"
line.long 0x04 "PTC$2CBSR1,Port Traffic Class $2 Credit Based Shaper Register 1"
repeat.end
repeat 8. (increment 0x1210 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PTC$2TSDR,Port Traffic Class $2 Time Specific Departure Register"
bitfld.long 0x00 31. "TSDE,Time specific departure enable" "Disabled,Enabled"
repeat.end
rgroup.long 0x1308++0x03
line.long 0x00 "PPMCAPR,Port Parse Match Capability Register"
bitfld.long 0x00 0.--3. "NUM_PSCM,Number of parse summary classification ternary match rules per port" "8,16,32,64,?..."
group.long 0x1400++0x03
line.long 0x00 "PRSSCR,Port RSS Control Register"
bitfld.long 0x00 9. "NON_IP_EN,Non-IP hash enable" "Disabled,Enabled"
bitfld.long 0x00 5. "IP6_DIS,IPv6 packet disable" "No,Yes"
newline
bitfld.long 0x00 4. "IP6UDP_DIS,IPv6 with UDP disable" "No,Yes"
bitfld.long 0x00 3. "IP4UDP_DIS,IPv4 with UDP disable" "No,Yes"
newline
bitfld.long 0x00 2. "IP6TCP_DIS,IPv6 with TCP packet disable" "No,Yes"
bitfld.long 0x00 1. "IP4_DIS,IPv4 packet disable" "No,Yes"
newline
bitfld.long 0x00 0. "IP4TCP_DIS,IPv4 with TCP packet disable" "No,Yes"
rgroup.long 0x1404++0x03
line.long 0x00 "PRSSCAPR,Port RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling (RSS) entries per SI" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 10. (increment 0x1410 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PRSSKR$2,Port RSS Key Register $2"
repeat.end
group.long 0x1500++0x0B
line.long 0x00 "PLPMR,Port Low Power Mode Register"
bitfld.long 0x00 4. "WDRE,Wake-on-LAN drop resilience enable" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "WDR,Wake-on-LAN drop resilience" "0,1,2,3"
newline
bitfld.long 0x00 1. "WME,Wake-on-LAN mode enable" "Disabled,Enabled"
line.long 0x04 "PWOFCR,Port Wake-On Filter Control Register"
bitfld.long 0x04 9. "MDCE,MLD DMAC check enable" "Disabled,Enabled"
bitfld.long 0x04 8. "HVME,Hash VLAN match enable" "Disabled,Enabled"
newline
bitfld.long 0x04 4. "MLDE,MLD request packet Wake-on-LAN enable" "Disabled,Enabled"
bitfld.long 0x04 3. "NDNSE,ND/NS request packet Wake-on-LAN enable" "Disabled,Enabled"
newline
bitfld.long 0x04 2. "ARPE,ARP request packet Wake-on-LAN enable" "Disabled,Enabled"
bitfld.long 0x04 1. "TSE,TCP SYN message Wake-on-LAN enable" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "MPE,Magic packet Wake-on-LAN enable" "Disabled,Enabled"
line.long 0x08 "PWOSR,Port Wake-On Status Register"
rbitfld.long 0x08 31. "WOLA,Wake-On-LAN active" "Inactive,Active"
rbitfld.long 0x08 30. "ICMB,ICM blocked" "Not blocked,Blocked"
newline
bitfld.long 0x08 4. "MLD,MLD request Wake-on-LAN packet" "Not requested,Requested"
bitfld.long 0x08 3. "NDNS,ND/NS request Wake-on-LAN packet" "Not requested,Requested"
newline
bitfld.long 0x08 2. "ARP,ARP request Wake-on-LAN packet" "Not requested,Requested"
bitfld.long 0x08 1. "TS,TCP SYN Wake-on-LAN message" "Not requested,Requested"
newline
bitfld.long 0x08 0. "MP,Magic Wake-on-LAN packet" "Not requested,Requested"
group.long 0x1520++0x03
line.long 0x00 "PIPV4MR,Port IPv4 Mode Register"
bitfld.long 0x00 31. "ATDE,ARP target protocol IP address detect enable" "Disabled,Enabled"
group.long 0x1528++0x03
line.long 0x00 "PIPV4AR,Port IPv4 Address Register"
rgroup.long 0x1604++0x03
line.long 0x00 "PSIMAFCAPR,Port Station Interface MAC Address Filtering Capability Register"
bitfld.long 0x00 12. "MODE,Mode" "0,1"
hexmask.long.word 0x00 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port"
group.long 0x1614++0x03
line.long 0x00 "PSI0VMAFCFGR,Port Station Interface 0 VSI MAC Address Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI"
group.long 0x1618++0x03
line.long 0x00 "PSI1VMAFCFGR,Port Station Interface 1 VSI MAC Address Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI"
group.long 0x161C++0x03
line.long 0x00 "PSI2VMAFCFGR,Port Station Interface 2 VSI MAC Address Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI"
rgroup.long 0x1680++0x07
line.long 0x00 "PUFDMFR,Port Unicast Frames Dropped Due To MAC Filtering Register"
line.long 0x04 "PMFDMFR,Port Multicast Frames Dropped Due To MAC Filtering Register"
group.long 0x1700++0x03
line.long 0x00 "PSIVLANFMR,Port Station Interface VLAN Filtering Mode Register"
bitfld.long 0x00 0. "VS,VLAN tag select" "Inner,Outer"
rgroup.long 0x1704++0x03
line.long 0x00 "PSIVLANFCAPR,Port Station Interface VLAN Filtering Capability Register"
bitfld.long 0x00 12. "MODE,Mode" "0,1"
hexmask.long.word 0x00 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port"
group.long 0x1714++0x03
line.long 0x00 "PSI0VLANFCFGR,Port Station Interface 0 VLAN Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI"
group.long 0x1718++0x03
line.long 0x00 "PSI1VLANFCFGR,Port Station Interface 1 VLAN Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI"
group.long 0x171C++0x03
line.long 0x00 "PSI2VLANFCFGR,Port Station Interface 2 VLAN Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI"
rgroup.long 0x1780++0x0B
line.long 0x00 "PUFDVFR,Port Unicast Frames Dropped VLAN Filtering Register"
line.long 0x04 "PMFDVFR,Port Multicast Frames Dropped VLAN Filtering Register"
line.long 0x08 "PBFDVFR,Port Broadcast Frames Dropped VLAN Filtering Register"
group.long 0x1800++0x03
line.long 0x00 "PRFSMR,Port RFS Mode Register"
bitfld.long 0x00 31. "RFSE,RFS enable" "Disabled,Enabled"
rgroup.long 0x1804++0x03
line.long 0x00 "PRFSCAPR,Port RFS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RFS,Number of receive flow steering (RFS) entries per port" "16,32,48,64,80,96,112,128,144,160,176,192,208,224,240,256"
group.long 0x1814++0x03
line.long 0x00 "PSI0RFSCFGR,Port Station Interface 0 RFS Configuration Register"
hexmask.long.word 0x00 0.--8. 1. "NUM_RFS,Number of receive flow steering (RFS) entries assigned to the SI"
group.long 0x1814++0x03
line.long 0x00 "PSI1RFSCFGR,Port Station Interface 1 RFS Configuration Register"
hexmask.long.word 0x00 0.--8. 1. "NUM_RFS,Number of receive flow steering (RFS) entries assigned to the SI"
group.long 0x1814++0x03
line.long 0x00 "PSI2RFSCFGR,Port Station Interface 2 RFS Configuration Register"
hexmask.long.word 0x00 0.--8. 1. "NUM_RFS,Number of receive flow steering (RFS) entries assigned to the SI"
group.long 0x1A00++0x03
line.long 0x00 "PTGCR,Port Time Gating Control Register"
bitfld.long 0x00 31. "TGE,Time gating enable" "Disabled,Enabled"
bitfld.long 0x00 30. "TGPE,Time gate fusing disable" "No,Yes"
newline
bitfld.long 0x00 29. "TG_DROP_DISABLE,Time gate drop disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "HOLD_ADVANCE,Hold-advance value"
rgroup.long 0x1A08++0x03
line.long 0x00 "PTGCAPR,Port Time Gating Capability Register"
hexmask.long.word 0x00 0.--15. 1. "MAX_GCL_LEN,Max time gating (Qbv) gate control list length"
rgroup.long 0x1A10++0x13
line.long 0x00 "PTGAGLSR,Port Time Gating Admin Gate List Status Register"
bitfld.long 0x00 1. "CFG_PEND,New configuration processed" "Completed,Pending"
bitfld.long 0x00 0. "TG,Time gated" "Not active,Active"
line.long 0x04 "PTGAGLLR,Port Time Gating Admin Gate List Length Register"
hexmask.long.word 0x04 0.--15. 1. "ADMIN_GATE_LIST_LENGTH,Administrative gate list length"
line.long 0x08 "PTGOGLSR,Port Time Gating Operational Gate List Status Register"
hexmask.long.word 0x08 0.--15. 1. "CURR_POS,Current position in the operational gate list table"
line.long 0x0C "PTGOGLLR,Port Time Gating Operational Gate List Length Register"
hexmask.long.word 0x0C 0.--15. 1. "OPER_GATE_LIST_LENGTH,Operation gate list length"
line.long 0x10 "PTGLDFCR,Port Time Gating Late Discarded Frame Count Register"
group.long 0x1A24++0x03
line.long 0x00 "PESMATOR,Port Egress Selection Manager Advance Time Offset Register"
hexmask.long.word 0x00 0.--15. 0x01 "ADV_TIME_OFFSET,Advance time offset"
repeat 8. (increment 0x1A44 0x10)(increment 0. 1.)
rgroup.long $1++0x0B
line.long 0x00 "PTC$2TGSR,Port Traffic Class $2 Time Gating Status Register"
bitfld.long 0x00 0. "CURR_STATE,Current gate state" "Closed,Open"
line.long 0x04 "PTC$2TGTOCR0,Port Traffic Class $2 Time Gating Transmission Overrun Counter Register 0"
line.long 0x08 "PTC$2TGTOCR1,Port Traffic Class $2 Time Gating Transmission Overrun Counter"
repeat.end
group.long 0x1B00++0x03
line.long 0x00 "PPSFPMR,Port Per-Stream Filtering And Policing Mode Register"
bitfld.long 0x00 3. "PVZC,Port VLAN zero control" "Ignored,Accepted"
bitfld.long 0x00 2. "PVC,Port VLAN control" "Ignored (untagged),Accepted"
newline
bitfld.long 0x00 1. "VS,Per-stream filtering and policing (PSFP) VLAN selection" "Inner,Outer"
bitfld.long 0x00 0. "PSFPE,Per-stream filtering and policing (PSFP) enable" "Disabled,Enabled"
rgroup.long 0x1B08++0x03
line.long 0x00 "PSIDCAPR,Port Stream Identity Capability Register"
hexmask.long.word 0x00 0.--15. 1. "SIDIT_ENTRIES,Maximum number of stream identity instance table entries"
rgroup.long 0x1B18++0x03
line.long 0x00 "PSFCAPR,Port Stream Filter Capability Register"
hexmask.long.word 0x00 0.--15. 1. "SFIT_ENTRIES,Maximum number of stream filter instance table entries"
rgroup.long 0x1B28++0x03
line.long 0x00 "PSGCAPR,Port Stream Gating Capability Register"
bitfld.long 0x00 16.--18. "GC_LEN,Stream gate control list size (Qci)" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--15. 1. "SGIT_ENTRIES,Maximum number of stream gate instance table entries"
group.long 0x1B30++0x03
line.long 0x00 "PFMCR,Port Flow Meter Control Register"
hexmask.long.byte 0x00 0.--7. 1. "OAL,Overhead accounting length"
rgroup.long 0x1B38++0x03
line.long 0x00 "PFMCAPR,Port Flow Meter Capability Register"
hexmask.long.word 0x00 0.--15. 1. "NUM_FM_INST,Number of flow meters instances in the flow meter instance table"
group.long 0x1D00++0x0F
line.long 0x00 "PSI0UMHFR0,Port Station Interface 0 Unicast MAC Hash Filter Register 0"
line.long 0x04 "PSI0UMHFR1,Port Station Interface 0 Unicast MAC Hash Filter Register 1"
line.long 0x08 "PSI0MMHFR0,Port Station Interface 0 Multicast MAC Hash Filter Register 0"
line.long 0x0C "PSI0MMHFR1,Port Station Interface 0 Multicast MAC Hash Filter Register 1"
group.long 0x1D10++0x0F
line.long 0x00 "PSI1UMHFR0,Port Station Interface 1 Unicast MAC Hash Filter Register 0"
line.long 0x04 "PSI1UMHFR1,Port Station Interface 1 Unicast MAC Hash Filter Register 1"
line.long 0x08 "PSI1MMHFR0,Port Station Interface 1 Multicast MAC Hash Filter Register 0"
line.long 0x0C "PSI1MMHFR1,Port Station Interface 1 Multicast MAC Hash Filter Register 1"
group.long 0x1D20++0x0F
line.long 0x00 "PSI2UMHFR0,Port Station Interface 2 Unicast MAC Hash Filter Register 0"
line.long 0x04 "PSI2UMHFR1,Port Station Interface 2 Unicast MAC Hash Filter Register 1"
line.long 0x08 "PSI2MMHFR0,Port Station Interface 2 Multicast MAC Hash Filter Register 0"
line.long 0x0C "PSI2MMHFR1,Port Station Interface 2 Multicast MAC Hash Filter Register 1"
group.long 0x1E00++0x07
line.long 0x00 "PSI0VHFR0,Port Station Interface 0 VLAN Hash Filter Register 0"
line.long 0x04 "PSI0VHFR1,Port Station Interface 0 VLAN Hash Filter Register 1"
group.long 0x1E08++0x07
line.long 0x00 "PSI1VHFR0,Port Station Interface 1 VLAN Hash Filter Register 0"
line.long 0x04 "PSI1VHFR1,Port Station Interface 1 VLAN Hash Filter Register 1"
group.long 0x1E10++0x07
line.long 0x00 "PSI2VHFR0,Port Station Interface 2 VLAN Hash Filter Register 0"
line.long 0x04 "PSI2VHFR1,Port Station Interface 2 VLAN Hash Filter Register 1"
repeat 8. (increment 0x2020 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PTC$2MSDUR,Port Traffic Class $2 Maximum SDU Register"
hexmask.long.word 0x00 0.--15. 1. "MAXSDU,Maximum SDU"
repeat.end
group.long 0x3000++0x03
line.long 0x00 "PAR_VXLAN_DP,VXLAN DP Configuration"
hexmask.long.word 0x00 16.--31. 1. "VXLAN_DP_1,Configured VXLAN DP 1"
hexmask.long.word 0x00 0.--15. 1. "VXLAN_DP_2,Configured VXLAN DP 2"
group.long 0x3024++0x03
line.long 0x00 "PAR_UDP_IPSEC,UDP IPsec"
bitfld.long 0x00 29. "SPPR,Short packet padding removal from checksum calculation" "Not removed,Removed"
repeat 4. (increment 0x303C 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PAR_CUSTETYPE$2,CustEtype $2"
hexmask.long.word 0x00 16.--31. 1. "ETYPE,ETYPE"
bitfld.long 0x00 5. "EN,Detection and mapping enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--3. "CP,Non IP code point" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x3050++0x03
line.long 0x00 "PAR_PORT_CFG,Port Configuration"
bitfld.long 0x00 1. "L3CD,Layer 3 checksum disable" "No,Yes"
bitfld.long 0x00 0. "L4CD,Layer 4 checksum disable" "No,Yes"
group.long 0x8008++0x03
line.long 0x00 "PM0_COMMAND_CONFIG,Port MAC 0 Command And Configuration Register"
bitfld.long 0x00 31. "MG,Magic packet detection enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RXSTP,Rx stop" "Not stopped,Stopped"
newline
bitfld.long 0x00 24. "REG_LOWP_RXETY,Rx low power indication assert" "Low Power Idle,FIFO empty"
bitfld.long 0x00 23. "TX_LOWP_ENA,Transmit low power idle enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "SFD,SFD character check disable at frame start" "No,Yes"
bitfld.long 0x00 17. "NO_LEN_CHK,Payload length check disable" "No,Yes"
newline
bitfld.long 0x00 16. "SEND_IDLE,Frame transmissions suppress and force IDLE" "Not sent,Sent"
bitfld.long 0x00 13. "CNT_FRM_EN,Control frame reception enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "SWR,Software reset" "No reset,Reset"
bitfld.long 0x00 11. "TXP,Padding of frames in transmit direction enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "XGLP,XGMII/GMII loopback enable" "Disabled,Enabled"
bitfld.long 0x00 9. "TX_ADDR_INS,Transmit source MAC address insertion" "Transmit,Overwrite"
newline
bitfld.long 0x00 8. "PAUSE_IGN,Ignore pause frame quanta" "Not ignored,Ignored"
bitfld.long 0x00 7. "PAUSE_FWD,Terminate/forward received pause frames" "Terminated,Forwarded"
newline
bitfld.long 0x00 6. "CRC,Terminate/forward CRC of received frames" "Terminated,Forwarded"
bitfld.long 0x00 5. "PAD,Frame padding removal in receive path enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "PROMIS,Promiscuous operation enable" "Disabled,Enabled"
bitfld.long 0x00 3. "WAN,WAN mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "RX_EN,MAC receive path enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_EN,MAC transmit path enable" "Disabled,Enabled"
group.long 0x8014++0x03
line.long 0x00 "PM0_MAXFRM,Port MAC 0 Maximum Frame Length Register"
hexmask.long.word 0x00 16.--31. 1. "TX_MTU,Maximum length on transmit"
hexmask.long.word 0x00 0.--15. 1. "MAXFRM,Maximum supported received frame length"
group.long 0x801C++0x03
line.long 0x00 "PM0_RX_FIFO_SECTIONS,Port MAC a Receive FIFO Threshold Configuration Register"
bitfld.long 0x00 16.--20. "RX_SECTION_AVAIL,Receive FIFO available" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x8040++0x07
line.long 0x00 "PM0_IEVENT,Port MAC 0 Interrupt Event Register"
eventfld.long 0x00 31. "LT,XGMII - link training event" "Not received,Received"
eventfld.long 0x00 30. "AN,XGMII - auto negotiation event" "Not occurred,Occurred"
newline
eventfld.long 0x00 29. "PCS,XGMII - PCS event" "Not occurred,Occurred"
eventfld.long 0x00 14. "MGI,Magic packet detection indication event" "Not detected,Detected"
newline
eventfld.long 0x00 12. "RX_OVFL,Receive FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 11. "TX_UNFL,Transmit FIFO underflow event" "Not underflowed,Underflowed"
newline
eventfld.long 0x00 10. "TX_OVFL,Transmit FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 7. "LI_FAULT,Link interruption fault event (XGMII)" "Not occurred,Occurred"
newline
rbitfld.long 0x00 6. "RX_EMPTY,Receive FIFO empty event" "Not occurred,Occurred"
rbitfld.long 0x00 5. "TX_EMPTY,Transmit FIFO empty event" "Not occurred,Occurred"
newline
rbitfld.long 0x00 4. "RX_LOWP,Low power idle event" "Not occurred,Occurred"
eventfld.long 0x00 2. "PHY_LOS,Phy loss of signal event" "Not occurred,Occurred"
newline
eventfld.long 0x00 1. "REM_FAULT,Remote fault event (XGMII)" "Not occurred,Occurred"
eventfld.long 0x00 0. "LOC_FAULT,Local fault event (XGMII)" "Not occurred,Occurred"
line.long 0x04 "PM0_TX_IPG_LENGTH,Port MAC 0 Transmit Inter-Packet Gap Length Register"
hexmask.long.byte 0x04 0.--6. 1. "IPG_LEN,Transmit inter-packet gap value"
group.long (0x8040+0x0C)++0x03
line.long 0x00 "PM0_IMASK,Port MAC 0 Interrupt Mask Register"
bitfld.long 0x00 30. "MGI,Magic packet detection indication normal interrupt mask" "Masked,Enabled"
bitfld.long 0x00 15. "PCS,XGMII - PCS event interrupt mask" "Masked,Enabled"
newline
bitfld.long 0x00 14. "AN,XGMII - auto negotiation event interrupt mask" "Masked,Enabled"
bitfld.long 0x00 13. "LT,XGMII - link training event interrupt mask" "Masked,Enabled"
group.long (0x8040+0x14)++0x03
line.long 0x00 "PM0_PAUSE_QUANTA,Port MAC 0 Pause Quanta Register"
hexmask.long.word 0x00 0.--15. 1. "PQNT,Quanta value used when XOFF is triggered"
group.long (0x8040+0x24)++0x03
line.long 0x00 "PM0_PAUSE_THRESH,Port MAC 0 Pause Quanta Threshold Register"
hexmask.long.word 0x00 0.--15. 1. "QTH,Refresh pause frame sending value"
group.long (0x8040+0x34)++0x03
line.long 0x00 "PM0_RX_PAUSE_STATUS,Port MAC 0 Receive Pause Status Register"
rbitfld.long 0x00 0. "PSTAT,Pause status" "Not paused,Paused"
group.long (0x8040+0x78)++0x0F
line.long 0x00 "PM0_LPWAKE_TIMER,Port MAC 0 EEE Low Power Wakeup Timer Register"
hexmask.long.tbyte 0x00 0.--23. 1. "TW_SYS_TX,Enet_clk cycles number required by PHY"
line.long 0x04 "PM0_SLEEP_TIMER,Port MAC 0 Transmit EEE Low Power Timer Register"
hexmask.long.tbyte 0x04 0.--23. 1. "SLEEPT,Enet_clk cycles number where Tx is idle"
line.long 0x08 "PM0_SINGLE_STEP,Port MAC 0 IEEE1588 Single-Step Control Register"
bitfld.long 0x08 31. "EN,IEEE-1588 single-step enable" "Disabled,Enabled"
hexmask.long.byte 0x08 8.--15. 0x01 "OFFSET,Start offset from the beginning of a frame"
newline
bitfld.long 0x08 7. "CH,Checksum update" "Not required,Required"
line.long 0x0C "PM0_PEER_DELAY,Port MAC 0 IEEE1588 Single-Step Peer Delay Register"
hexmask.long 0x0C 0.--29. 1. "PEERDELAY,Value added to the correction field in addition to the transient time update"
group.long (0x8040+0xA0)++0x03
line.long 0x00 "PM0_STATN_CONFIG,Port MAC 0 Statistics Configuration Register"
eventfld.long 0x00 2. "CLR,Reset all counters" "No reset,Reset"
bitfld.long 0x00 1. "COD,Counter reset by read" "No reset,Reset"
newline
bitfld.long 0x00 0. "SAT,Saturate counters" "No,Yes"
rgroup.quad 0x8100++0xCF
line.quad 0x00 "PM0_REOCTN,Port MAC 0 Receive Ethernet Octets Counter Register"
line.quad 0x08 "PM0_ROCTN,Port MAC 0 Receive Octets Counter Register"
line.quad 0x10 "PM0_RALNN,Port MAC 0 Receive Alignment Error Counter Register"
line.quad 0x18 "PM0_RXPFN,Port MAC 0 Receive Valid Pause Frame Counter Register"
line.quad 0x20 "PM0_RFRMN,Port MAC 0 Receive Frame Counter Register"
line.quad 0x28 "PM0_RFCSN,Port MAC 0 Receive Frame Check Sequence Error Counter Register"
line.quad 0x30 "PM0_RVLANN,Port MAC 0 Receive VLAN Frame Counter Register"
line.quad 0x38 "PM0_RERRN,Port MAC 0 Receive Frame Error Counter Register"
line.quad 0x40 "PM0_RUCAN,Port MAC 0 Receive Unicast Frame Counter Register"
line.quad 0x48 "PM0_RMCAN,Port MAC 0 Receive Multicast Frame Counter Register"
line.quad 0x50 "PM0_RBCAN,Port MAC 0 Receive Broadcast Frame Counter Register"
line.quad 0x58 "PM0_RDRPN,Port MAC 0 Receive Dropped Packets Counter Register"
line.quad 0x60 "PM0_RPKTN,Port MAC 0 Receive Packets Counter Register"
line.quad 0x68 "PM0_RUNDN,Port MAC 0 Receive Undersized Packet Counter Register"
line.quad 0x70 "PM0_R64N,Port MAC 0 Receive 64-Octet Packet Counter Register"
line.quad 0x78 "PM0_R127N,Port MAC 0 Receive 65 to 127-Octet Packet Counter Register"
line.quad 0x80 "PM0_R255N,Port MAC 0 Receive 128 To 255-Octet Packet Counter Register"
line.quad 0x88 "PM0_R511N,Port MAC 0 Receive 256 To 511-Octet Packet Counter Register"
line.quad 0x90 "PM0_R1023N,Port MAC 0 Receive 512 To 1023-Octet Packet Counter Register"
line.quad 0x98 "PM0_R1522N,Port MAC 0 Receive 1024 To 1522-Octet Packet Counter Register"
line.quad 0xA0 "PM0_R1523XN,Port MAC 0 Receive 1523 To Max-Octet Packet Counter Register"
line.quad 0xA8 "PM0_ROVRN,Port MAC 0 Receive Oversized Packet Counter Register"
line.quad 0xB0 "PM0_RJBRN,Port MAC 0 Receive Jabber Packet Counter Register"
line.quad 0xB8 "PM0_RFRGN,Port MAC 0 Receive Fragment Packet Counter Register"
line.quad 0xC0 "PM0_RCNPN,Port MAC 0 Receive Control Packet Counter Register"
line.quad 0xC8 "PM0_RDRNTPN,Port MAC 0 Receive Dropped Not Truncated Packets Counter Register"
rgroup.quad (0x8100+0x100)++0x0F
line.quad 0x00 "PM0_TEOCTN,Port MAC 0 Transmit Ethernet Octets Counter Register"
line.quad 0x08 "PM0_TOCTN,Port MAC 0 Transmit Octets Counter Register"
rgroup.quad (0x8100+0x118)++0x3F
line.quad 0x00 "PM0_TXPFN,Port MAC 0 Transmit Valid Pause Frame Counter Register"
line.quad 0x08 "PM0_TFRMN,Port MAC 0 Transmit Frame Counter Register"
line.quad 0x10 "PM0_TFCSN,Port MAC 0 Transmit Frame Check Sequence Error Counter"
line.quad 0x18 "PM0_TVLANN,Port MAC 0 Transmit VLAN Frame Counter Register"
line.quad 0x20 "PM0_TERRN,Port MAC 0 Transmit Frame Error Counter Register"
line.quad 0x28 "PM0_TUCAN,Port MAC 0 Transmit Unicast Frame Counter Register"
line.quad 0x30 "PM0_TMCAN,Port MAC 0 Transmit Multicast Frame Counter Register"
line.quad 0x38 "PM0_TBCAN,Port MAC 0 Transmit Broadcast Frame Counter Register"
rgroup.quad (0x8100+0x160)++0x47
line.quad 0x00 "PM0_TPKTN,Port MAC 0 Transmit Packets Counter Register"
line.quad 0x08 "PM0_TUNDN,Port MAC 0 Transmit Undersized Packet Counter Register"
line.quad 0x10 "PM0_T64N,Port MAC 0 Transmit 64-Octet Packet Counter Register"
line.quad 0x18 "PM0_T127N,Port MAC 0 Transmit 65 To 127-Octet Packet Counter Register"
line.quad 0x20 "PM0_T255N,Port MAC 0 Transmit 128 To 255-Octet Packet Counter Register"
line.quad 0x28 "PM0_T511N,Port MAC 0 Transmit 256 To 511-Octet Packet Counter Register"
line.quad 0x30 "PM0_T1023N,Port MAC 0 Transmit 512 To 1023-Octet Packet Counter Register"
line.quad 0x38 "PM0_T1522N,Port MAC 0 Transmit 1024 To 1522-Octet Packet Counter Register"
line.quad 0x40 "PM0_T1523N,Port MAC 0 Transmit 1523 To TX_MTU-Octet Packet Counter Register"
rgroup.quad (0x8100+0x1C0)++0x07
line.quad 0x00 "PM0_TCNPN,Port MAC 0 Transmit Control Packet Counter Register"
if (((per.l(ad:0x1F8040000+0x8300))&0x8000)==0x00)
group.long 0x8300++0x03
line.long 0x00 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 13.--14. "SSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "SFD,Full duplex RGMII mode force" ",Forced"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
else
group.long 0x8300++0x03
line.long 0x00 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
endif
rgroup.long 0x8304++0x03
line.long 0x00 "PM0_IF_STATUS,Port MAC 0 Interface Status Register"
bitfld.long 0x00 15. "RGLINK,Valid link established" "No,Yes"
bitfld.long 0x00 13.--14. "RGSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "RGFD,RGMII full duplex link established" "No link/Half-duplex,Full-duplex"
tree.end
tree "ENETC_PF2"
base ad:0x1F8080000
group.long 0x00++0x03
line.long 0x00 "PMR,Port Mode Register"
bitfld.long 0x00 16. "SI0EN,Station interface 0 enable" "Disabled,Enabled"
bitfld.long 0x00 8.--11. "PSPEED,Port speed" "10Mbps,100Mbps,1000Mbps,10Gbps,2.5Gbps,5Gbps,?..."
rgroup.long 0x04++0x03
line.long 0x00 "PSR,Port Status Register"
bitfld.long 0x00 1. "RX_BUSY,Receive busy" "Idle,Busy"
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
group.long 0x14++0x0B
line.long 0x00 "PPFALOR,Port Per-Frame Accounting Length Overhead Register"
bitfld.long 0x00 31. "PFALOE,Per-frame accounting length overhead enable" "Disabled,Enabled"
hexmask.long.byte 0x00 0.--7. 1. "BCO,Byte count overhead"
line.long 0x04 "PSIPMMR,Port Station Interface Promiscuous MAC Mode Register"
bitfld.long 0x04 16. "SI0_MAC_MP,SI 0 MAC multicast promiscuous" "Not qualified,Qualified"
bitfld.long 0x04 0. "SI0_MAC_UP,SI 0 MAC unicast promiscuous" "Not qualified,Qualified"
line.long 0x08 "PSIPVMR,Port Station Interface Promiscuous VLAN Mode Register"
bitfld.long 0x08 16. "SI0_VLAN_UTA,SI 0 untagged frames (no VLAN) accepted" "Not qualified,Qualified"
bitfld.long 0x08 0. "SI0_VLAN_P,SI 0 VLAN promiscuous" "Not qualified,Qualified"
group.long 0x100++0x03
line.long 0x00 "PSI0PMAR0,Port Station Interface 0 Primary MAC Address Register 0"
group.long 0x104++0x03
line.long 0x00 "PSI0PMAR1,Port Station Interface 0 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x200++0x0B
line.long 0x00 "PONVLANR,Port Outer Native VLAN Register"
bitfld.long 0x00 19. "VZE,Port outer native VLAN VID used" "Not used,Used"
bitfld.long 0x00 18. "PNE,Port outer native VLAN used" "Not used,Used"
newline
bitfld.long 0x00 16.--17. "TPID,VLAN Ethertype used" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR.ETYPE"
bitfld.long 0x00 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI,Drop eligible indicator" "Not eligible,Eligible"
hexmask.long.word 0x00 0.--11. 1. "VID,VLAN identifier"
line.long 0x04 "PINVLANR,Port Inner Native VLAN Register"
bitfld.long 0x04 19. "VZE,Port outer native VLAN VID used" "Not used,Used"
bitfld.long 0x04 18. "PNE,Port outer native VLAN used" "Not used,Used"
newline
bitfld.long 0x04 16.--17. "TPID,VLAN Ethertype used" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR2.ETYPE"
bitfld.long 0x04 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12. "DEI,Drop eligible indicator" "Not eligible,Eligible"
hexmask.long.word 0x04 0.--11. 1. "VID,VLAN identifier"
line.long 0x08 "PVCLCTR,Port VLAN Classification Control Register"
bitfld.long 0x08 9. "OAI,Outer as inner" "Not used,Used"
bitfld.long 0x08 8. "IV2,Inner VLAN must be second" "Nth,2nd"
newline
bitfld.long 0x08 7. "IVTPIDL[3],Custom VLAN as defined by PCVLANR2.ETYPE acceptable as inner VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 6. "[2],Custom VLAN as defined by PCVLANR1.ETYPE acceptable as inner VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 5. "[1],Standard S-VLAN 0x88A8 acceptable as inner VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 4. "[0],Standard C-VLAN 0x8100 acceptable as inner VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 3. "OVTPIDL[3],Custom VLAN as defined by PCVLANR2.ETYPE acceptable as outer VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 2. "[2],Custom VLAN as defined by PCVLANR1.ETYPE acceptable as outer VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 1. "[1],Standard S-VLAN 0x88A8 acceptable as outer VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 0. "[0],Standard C-VLAN 0x8100 acceptable as outer VLAN tag" "Not accepted,Accepted"
repeat 2. (increment 0x210 0x04)(increment 1. 1.)
group.long $1++0x03
line.long 0x00 "PCVLANR$2,Port Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x408++0x03
line.long 0x00 "PQCMR,Port HTA QoS Congestion Mapping Register"
bitfld.long 0x00 21. "PRIORITY_MAP7,Mapping of priority value 7 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 18. "PRIORITY_MAP6,Mapping of priority value 6 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 15. "PRIORITY_MAP5,Mapping of priority value 5 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 12. "PRIORITY_MAP4,Mapping of priority value 4 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 9. "PRIORITY_MAP3,Mapping of priority value 3 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 6. "PRIORITY_MAP2,Mapping of priority value 2 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 3. "PRIORITY_MAP1,Mapping of priority value 1 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 0. "PRIORITY_MAP0,Mapping of priority value 0 to ICM receive port queue priority" "High,Low"
group.long 0x410++0x07
line.long 0x00 "PPAUONTR,Port Pause ON Threshold Register"
hexmask.long 0x00 0.--27. 1. "THRESH,Amount of data accumulated in the internal receive buffer"
line.long 0x04 "PPAUOFFTR,Port Pause OFF Threshold Register"
hexmask.long 0x04 0.--27. 1. "THRESH,Amount of data accumulated in the internal receive buffer"
group.long 0x500++0x03
line.long 0x00 "PQOSMR,Port QoS Mode Register"
bitfld.long 0x00 8. "DTE,DSCP QoS classification enabled for VLAN tagged IP frames" "Disabled,Enabled"
bitfld.long 0x00 7. "DUE,DSCP QoS classification enabled for untagged VLAN IP frames" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--6. "DIPV,Default IPV" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--3. "DDR,Default Discard Resilience" "0,1,2,3"
newline
bitfld.long 0x00 1. "VE,VLAN enable" "Disabled,Enabled"
bitfld.long 0x00 0. "VS,VLAN tag select" "Inner,Outer"
group.long 0x510++0x0B
line.long 0x00 "PVLANIPVMR0,Port VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for receive data path 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for receive data path 6" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for receive data path 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for receive data path 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for receive data path 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for receive data path 2" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for receive data path 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for receive data path 0" "0,1,2,3,4,5,6,7"
line.long 0x04 "PVLANIPVMR1,Port VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for receive data path 15" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for receive data path 14" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for receive data path 13" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for receive data path 12" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for receive data path 11" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for receive data path 10" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for receive data path 9" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for receive data path 8" "0,1,2,3,4,5,6,7"
line.long 0x08 "PVLANDRMR,Port VLAN To DR Mapping Register"
bitfld.long 0x08 30.--31. "PCP_DEI_15,DR value used for receive data path 15" "0,1,2,3"
bitfld.long 0x08 28.--29. "PCP_DEI_14,DR value used for receive data path 14" "0,1,2,3"
newline
bitfld.long 0x08 26.--27. "PCP_DEI_13,DR value used for receive data path 13" "0,1,2,3"
bitfld.long 0x08 24.--25. "PCP_DEI_12,DR value used for receive data path 12" "0,1,2,3"
newline
bitfld.long 0x08 22.--23. "PCP_DEI_11,DR value used for receive data path 11" "0,1,2,3"
bitfld.long 0x08 20.--21. "PCP_DEI_10,DR value used for receive data path 10" "0,1,2,3"
newline
bitfld.long 0x08 18.--19. "PCP_DEI_9,DR value used for receive data path 9" "0,1,2,3"
bitfld.long 0x08 16.--17. "PCP_DEI_8,DR value used for receive data path 8" "0,1,2,3"
newline
bitfld.long 0x08 14.--15. "PCP_DEI_7,DR value used for receive data path 7" "0,1,2,3"
bitfld.long 0x08 12.--13. "PCP_DEI_6,DR value used for receive data path 6" "0,1,2,3"
newline
bitfld.long 0x08 10.--11. "PCP_DEI_5,DR value used for receive data path 5" "0,1,2,3"
bitfld.long 0x08 8.--9. "PCP_DEI_4,DR value used for receive data path 4" "0,1,2,3"
newline
bitfld.long 0x08 6.--7. "PCP_DEI_3,DR value used for receive data path 3" "0,1,2,3"
bitfld.long 0x08 4.--5. "PCP_DEI_2,DR value used for receive data path 2" "0,1,2,3"
newline
bitfld.long 0x08 2.--3. "PCP_DEI_1,DR value used for receive data path 1" "0,1,2,3"
bitfld.long 0x08 0.--1. "PCP_DEI_0,DR value used for receive data path 0" "0,1,2,3"
rgroup.long 0x600++0x07
line.long 0x00 "PRXMBER,Port HTA Receive Memory Buffer Entitlement Register"
hexmask.long 0x00 0.--27. 1. "AMOUNT,Port receive memory buffer entitlement for each port (bytes)"
line.long 0x04 "PRXMBLR,Port HTA Receive Memory Buffer Limit Register"
hexmask.long 0x04 0.--27. 1. "LIMIT,Port receive memory buffer limit for each port (bytes)"
group.long 0x608++0x03
line.long 0x00 "PTXMBAR,Port HTA Transmit Memory Buffer Allocation Register"
hexmask.long 0x00 0.--27. 1. "ALLOC,Transmit buffer memory allocation for each port (bytes)"
rgroup.long 0x60C++0x03
line.long 0x00 "FMBDTR,Free Memory Buffer Depletion Threshold Register"
hexmask.long 0x00 0.--27. 1. "THRESH,Free buffer depletion threshold (bytes)"
rgroup.long 0x680++0x1F
line.long 0x00 "FMBCR,Free Memory Buffer Count Register"
line.long 0x04 "FMBCLWMR,Free Memory Buffer Count Low Watermark Register"
line.long 0x08 "UMBCR,Unassigned Memory Buffer Count Register"
line.long 0x0C "UMBCHWMR,Unassigned Memory Buffer Count High Watermark Register"
line.long 0x10 "PRXMBCR,Port HTA Receive Buffer Count Register"
hexmask.long 0x10 0.--27. 1. "COUNT,Current receive buffer usage count for this port (bytes)"
line.long 0x14 "PRXMBCHWMR,Port HTA Receive Buffer Count High Watermark Register"
hexmask.long 0x14 0.--27. 1. "WATERMARK,High watermark for receive buffer usage since the last read of this register (bytes)"
line.long 0x18 "PTXMBCR,Port HTA Transmit Memory Buffer Count Register"
hexmask.long 0x18 0.--27. 1. "COUNT,Current amount of transmit buffer memory in use (bytes)"
line.long 0x1C "PTXMBCHWMR,Port HTA Transmit Memory Buffer Count High Watermark"
hexmask.long 0x1C 0.--27. 1. "WATERMARK,High watermark for transmit buffer memory since the last read of this register (bytes)"
group.long 0x700++0x03
line.long 0x00 "PICDR0DCR,Port HTA Ingress Congestion DR0 Discard Count Register"
group.long 0x710++0x03
line.long 0x00 "PICDR1DCR,Port HTA Ingress Congestion DR1 Discard Count Register"
group.long 0x720++0x03
line.long 0x00 "PICDR2DCR,Port HTA Ingress Congestion DR2 Discard Count Register"
group.long 0x730++0x03
line.long 0x00 "PICDR3DCR,Port HTA Ingress Congestion DR3 Discard Count Register"
group.long 0x708++0x03
line.long 0x00 "PICDR0DCRRR,Port HTA Ingress Congestion DR0 Discard Count Read-Reset Register"
group.long 0x718++0x03
line.long 0x00 "PICDR1DCRRR,Port HTA Ingress Congestion DR1 Discard Count Read-Reset Register"
group.long 0x728++0x03
line.long 0x00 "PICDR2DCRRR,Port HTA Ingress Congestion DR2 Discard Count Read-Reset Register"
group.long 0x738++0x03
line.long 0x00 "PICDR3DCRRR,Port HTA Ingress Congestion DR3 Discard Count Read-Reset Register"
group.long 0x740++0x03
line.long 0x00 "PICPDSR,Port HTA Ingress Congestion Priority Discard Status Register"
eventfld.long 0x00 28. "DR3_P1DS,DR3 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 24. "DR3_P0DS,DR3 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 20. "DR2_P1DS,DR2 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 16. "DR2_P0DS,DR2 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 12. "DR1_P1DS,DR1 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 8. "DR1_P0DS,DR1 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 4. "DR0_P1DS,DR0 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 0. "DR0_P0DS,DR0 priority 0 discard status" "No clear,Clear"
rgroup.long 0x810++0x03
line.long 0x00 "PBFDSIR,Port Broadcast Frame Drop SI Rejection Register"
rgroup.long 0x900++0x07
line.long 0x00 "PCAPR0,Port Capability Register 0"
hexmask.long.byte 0x00 24.--31. 1. "NUM_RX_BDR,Number of total receive buffer descriptor rings for the port"
hexmask.long.byte 0x00 16.--23. 1. "NUM_TX_BDR,Number of total transmit buffer descriptor rings for the port"
newline
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
newline
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci (Per-Stream Filtering and Policing)" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci (Per-Stream Filtering and Policing)" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
newline
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating (IEEE 802.1Qbv)" "Not supported,Supported"
newline
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload (GRO) support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload (GSO) support" "Not supported,Supported"
line.long 0x04 "PCAPR1,Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1K,2K,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multi-cast hash entries per SI" "64,128,256,512"
newline
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1(0),2(0-1),3(0-2),4(0-3),5(0-4),6(0-5),7(0-6),8(0-7)"
group.long 0x940++0x03
line.long 0x00 "PSI0CFGR0,Port Station Interface 0 Configuration Register 0"
bitfld.long 0x00 28.--31. "SIBW,Station interface traffic class bandwidth weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "SIVC[3],Custom VLAN as defined by PCVLANR2.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 26. "[2],Custom VLAN as defined by PCVLANR1.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
bitfld.long 0x00 25. "[1],Standard S-VLAN 0x88A8 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 24. "[0],Standard C-VLAN 0x8100 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
newline
bitfld.long 0x00 15. "ASE,Anti-spoofing enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SIVIE,Software VLAN insertion enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SPE,Source pruning enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
group.long 0xE10++0x03
line.long 0x00 "PCMEDR,Port Correctable Memory Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Invalid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "No error,Error"
newline
bitfld.long 0x00 29. "RGD,Report global disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE30++0x03
line.long 0x00 "PUMEDR,Port Uncorrectable Memory Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Invalid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "No error,Error"
newline
bitfld.long 0x00 29. "RGD,Report global disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0x1000++0x03
line.long 0x00 "PIPVTCMR0,Port HTA Tx IPV To Traffic Class Mapping Register 0"
bitfld.long 0x00 28.--30. "IPV7TC,IPV7 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6TC,IPV6 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "IPV5TC,IPV5 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4TC,IPV4 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3TC,IPV3 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2TC,IPV2 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "IPV1TC,IPV1 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0TC,IPV0 to traffic class mapping" "0,1,2,3,4,5,6,7"
repeat 8. (increment 0x1110 0x08)(increment 0. 1.)
group.long $1++0x07
line.long 0x00 "PTC$2CBSR0,Port Traffic Class $2 Credit Based Shaper Register 0"
bitfld.long 0x00 31. "CBSE,Credit based shaper enable" "Disabled,Enabled"
hexmask.long.byte 0x00 0.--6. 1. "BW,Bandwidth in percentage units"
line.long 0x04 "PTC$2CBSR1,Port Traffic Class $2 Credit Based Shaper Register 1"
repeat.end
repeat 8. (increment 0x1210 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PTC$2TSDR,Port Traffic Class $2 Time Specific Departure Register"
bitfld.long 0x00 31. "TSDE,Time specific departure enable" "Disabled,Enabled"
repeat.end
rgroup.long 0x1308++0x03
line.long 0x00 "PPMCAPR,Port Parse Match Capability Register"
bitfld.long 0x00 0.--3. "NUM_PSCM,Number of parse summary classification ternary match rules per port" "8,16,32,64,?..."
group.long 0x1400++0x03
line.long 0x00 "PRSSCR,Port RSS Control Register"
bitfld.long 0x00 9. "NON_IP_EN,Non-IP hash enable" "Disabled,Enabled"
bitfld.long 0x00 5. "IP6_DIS,IPv6 packet disable" "No,Yes"
newline
bitfld.long 0x00 4. "IP6UDP_DIS,IPv6 with UDP disable" "No,Yes"
bitfld.long 0x00 3. "IP4UDP_DIS,IPv4 with UDP disable" "No,Yes"
newline
bitfld.long 0x00 2. "IP6TCP_DIS,IPv6 with TCP packet disable" "No,Yes"
bitfld.long 0x00 1. "IP4_DIS,IPv4 packet disable" "No,Yes"
newline
bitfld.long 0x00 0. "IP4TCP_DIS,IPv4 with TCP packet disable" "No,Yes"
rgroup.long 0x1404++0x03
line.long 0x00 "PRSSCAPR,Port RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling (RSS) entries per SI" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 10. (increment 0x1410 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PRSSKR$2,Port RSS Key Register $2"
repeat.end
group.long 0x1500++0x0B
line.long 0x00 "PLPMR,Port Low Power Mode Register"
bitfld.long 0x00 4. "WDRE,Wake-on-LAN drop resilience enable" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "WDR,Wake-on-LAN drop resilience" "0,1,2,3"
newline
bitfld.long 0x00 1. "WME,Wake-on-LAN mode enable" "Disabled,Enabled"
line.long 0x04 "PWOFCR,Port Wake-On Filter Control Register"
bitfld.long 0x04 9. "MDCE,MLD DMAC check enable" "Disabled,Enabled"
bitfld.long 0x04 8. "HVME,Hash VLAN match enable" "Disabled,Enabled"
newline
bitfld.long 0x04 4. "MLDE,MLD request packet Wake-on-LAN enable" "Disabled,Enabled"
bitfld.long 0x04 3. "NDNSE,ND/NS request packet Wake-on-LAN enable" "Disabled,Enabled"
newline
bitfld.long 0x04 2. "ARPE,ARP request packet Wake-on-LAN enable" "Disabled,Enabled"
bitfld.long 0x04 1. "TSE,TCP SYN message Wake-on-LAN enable" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "MPE,Magic packet Wake-on-LAN enable" "Disabled,Enabled"
line.long 0x08 "PWOSR,Port Wake-On Status Register"
rbitfld.long 0x08 31. "WOLA,Wake-On-LAN active" "Inactive,Active"
rbitfld.long 0x08 30. "ICMB,ICM blocked" "Not blocked,Blocked"
newline
bitfld.long 0x08 4. "MLD,MLD request Wake-on-LAN packet" "Not requested,Requested"
bitfld.long 0x08 3. "NDNS,ND/NS request Wake-on-LAN packet" "Not requested,Requested"
newline
bitfld.long 0x08 2. "ARP,ARP request Wake-on-LAN packet" "Not requested,Requested"
bitfld.long 0x08 1. "TS,TCP SYN Wake-on-LAN message" "Not requested,Requested"
newline
bitfld.long 0x08 0. "MP,Magic Wake-on-LAN packet" "Not requested,Requested"
group.long 0x1520++0x03
line.long 0x00 "PIPV4MR,Port IPv4 Mode Register"
bitfld.long 0x00 31. "ATDE,ARP target protocol IP address detect enable" "Disabled,Enabled"
group.long 0x1528++0x03
line.long 0x00 "PIPV4AR,Port IPv4 Address Register"
rgroup.long 0x1604++0x03
line.long 0x00 "PSIMAFCAPR,Port Station Interface MAC Address Filtering Capability Register"
bitfld.long 0x00 12. "MODE,Mode" "0,1"
hexmask.long.word 0x00 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port"
group.long 0x1614++0x03
line.long 0x00 "PSI0VMAFCFGR,Port Station Interface 0 VSI MAC Address Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI"
rgroup.long 0x1680++0x07
line.long 0x00 "PUFDMFR,Port Unicast Frames Dropped Due To MAC Filtering Register"
line.long 0x04 "PMFDMFR,Port Multicast Frames Dropped Due To MAC Filtering Register"
group.long 0x1700++0x03
line.long 0x00 "PSIVLANFMR,Port Station Interface VLAN Filtering Mode Register"
bitfld.long 0x00 0. "VS,VLAN tag select" "Inner,Outer"
rgroup.long 0x1704++0x03
line.long 0x00 "PSIVLANFCAPR,Port Station Interface VLAN Filtering Capability Register"
bitfld.long 0x00 12. "MODE,Mode" "0,1"
hexmask.long.word 0x00 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port"
group.long 0x1714++0x03
line.long 0x00 "PSI0VLANFCFGR,Port Station Interface 0 VLAN Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI"
rgroup.long 0x1780++0x0B
line.long 0x00 "PUFDVFR,Port Unicast Frames Dropped VLAN Filtering Register"
line.long 0x04 "PMFDVFR,Port Multicast Frames Dropped VLAN Filtering Register"
line.long 0x08 "PBFDVFR,Port Broadcast Frames Dropped VLAN Filtering Register"
group.long 0x1800++0x03
line.long 0x00 "PRFSMR,Port RFS Mode Register"
bitfld.long 0x00 31. "RFSE,RFS enable" "Disabled,Enabled"
rgroup.long 0x1804++0x03
line.long 0x00 "PRFSCAPR,Port RFS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RFS,Number of receive flow steering (RFS) entries per port" "16,32,48,64,80,96,112,128,144,160,176,192,208,224,240,256"
group.long 0x1814++0x03
line.long 0x00 "PSI0RFSCFGR,Port Station Interface 0 RFS Configuration Register"
hexmask.long.word 0x00 0.--8. 1. "NUM_RFS,Number of receive flow steering (RFS) entries assigned to the SI"
group.long 0x1900++0x03
line.long 0x00 "PFPMR,Port Frame Preemption Mode Register"
bitfld.long 0x00 1. "PMACE,Preemptive MAC enable" "Disabled,Enabled"
group.long 0x1910++0x03
line.long 0x00 "PTC0FPR,Port Traffic Class 0 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1914++0x03
line.long 0x00 "PTC1FPR,Port Traffic Class 1 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1918++0x03
line.long 0x00 "PTC2FPR,Port Traffic Class 2 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x191C++0x03
line.long 0x00 "PTC3FPR,Port Traffic Class 3 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1920++0x03
line.long 0x00 "PTC4FPR,Port Traffic Class 4 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1924++0x03
line.long 0x00 "PTC5FPR,Port Traffic Class 5 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1928++0x03
line.long 0x00 "PTC6FPR,Port Traffic Class 6 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x192C++0x03
line.long 0x00 "PTC7FPR,Port Traffic Class 7 Frame Preemption Register"
bitfld.long 0x00 31. "FPE,Frame preemption enable" "Disabled,Enabled"
group.long 0x1A00++0x03
line.long 0x00 "PTGCR,Port Time Gating Control Register"
bitfld.long 0x00 31. "TGE,Time gating enable" "Disabled,Enabled"
bitfld.long 0x00 30. "TGPE,Time gate fusing disable" "No,Yes"
newline
bitfld.long 0x00 29. "TG_DROP_DISABLE,Time gate drop disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "HOLD_ADVANCE,Hold-advance value"
rgroup.long 0x1A08++0x03
line.long 0x00 "PTGCAPR,Port Time Gating Capability Register"
hexmask.long.word 0x00 0.--15. 1. "MAX_GCL_LEN,Max time gating (Qbv) gate control list length"
rgroup.long 0x1A10++0x13
line.long 0x00 "PTGAGLSR,Port Time Gating Admin Gate List Status Register"
bitfld.long 0x00 1. "CFG_PEND,New configuration processed" "Completed,Pending"
bitfld.long 0x00 0. "TG,Time gated" "Not active,Active"
line.long 0x04 "PTGAGLLR,Port Time Gating Admin Gate List Length Register"
hexmask.long.word 0x04 0.--15. 1. "ADMIN_GATE_LIST_LENGTH,Administrative gate list length"
line.long 0x08 "PTGOGLSR,Port Time Gating Operational Gate List Status Register"
hexmask.long.word 0x08 0.--15. 1. "CURR_POS,Current position in the operational gate list table"
line.long 0x0C "PTGOGLLR,Port Time Gating Operational Gate List Length Register"
hexmask.long.word 0x0C 0.--15. 1. "OPER_GATE_LIST_LENGTH,Operation gate list length"
line.long 0x10 "PTGLDFCR,Port Time Gating Late Discarded Frame Count Register"
group.long 0x1A24++0x03
line.long 0x00 "PESMATOR,Port Egress Selection Manager Advance Time Offset Register"
hexmask.long.word 0x00 0.--15. 0x01 "ADV_TIME_OFFSET,Advance time offset"
repeat 8. (increment 0x1A44 0x10)(increment 0. 1.)
rgroup.long $1++0x0B
line.long 0x00 "PTC$2TGSR,Port Traffic Class $2 Time Gating Status Register"
bitfld.long 0x00 0. "CURR_STATE,Current gate state" "Closed,Open"
line.long 0x04 "PTC$2TGTOCR0,Port Traffic Class $2 Time Gating Transmission Overrun Counter Register 0"
line.long 0x08 "PTC$2TGTOCR1,Port Traffic Class $2 Time Gating Transmission Overrun Counter"
repeat.end
group.long 0x1B00++0x03
line.long 0x00 "PPSFPMR,Port Per-Stream Filtering And Policing Mode Register"
bitfld.long 0x00 3. "PVZC,Port VLAN zero control" "Ignored,Accepted"
bitfld.long 0x00 2. "PVC,Port VLAN control" "Ignored (untagged),Accepted"
newline
bitfld.long 0x00 1. "VS,Per-stream filtering and policing (PSFP) VLAN selection" "Inner,Outer"
bitfld.long 0x00 0. "PSFPE,Per-stream filtering and policing (PSFP) enable" "Disabled,Enabled"
rgroup.long 0x1B08++0x03
line.long 0x00 "PSIDCAPR,Port Stream Identity Capability Register"
hexmask.long.word 0x00 0.--15. 1. "SIDIT_ENTRIES,Maximum number of stream identity instance table entries"
rgroup.long 0x1B18++0x03
line.long 0x00 "PSFCAPR,Port Stream Filter Capability Register"
hexmask.long.word 0x00 0.--15. 1. "SFIT_ENTRIES,Maximum number of stream filter instance table entries"
rgroup.long 0x1B28++0x03
line.long 0x00 "PSGCAPR,Port Stream Gating Capability Register"
bitfld.long 0x00 16.--18. "GC_LEN,Stream gate control list size (Qci)" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--15. 1. "SGIT_ENTRIES,Maximum number of stream gate instance table entries"
group.long 0x1B30++0x03
line.long 0x00 "PFMCR,Port Flow Meter Control Register"
hexmask.long.byte 0x00 0.--7. 1. "OAL,Overhead accounting length"
rgroup.long 0x1B38++0x03
line.long 0x00 "PFMCAPR,Port Flow Meter Capability Register"
hexmask.long.word 0x00 0.--15. 1. "NUM_FM_INST,Number of flow meters instances in the flow meter instance table"
group.long 0x1D00++0x0F
line.long 0x00 "PSI0UMHFR0,Port Station Interface 0 Unicast MAC Hash Filter Register 0"
line.long 0x04 "PSI0UMHFR1,Port Station Interface 0 Unicast MAC Hash Filter Register 1"
line.long 0x08 "PSI0MMHFR0,Port Station Interface 0 Multicast MAC Hash Filter Register 0"
line.long 0x0C "PSI0MMHFR1,Port Station Interface 0 Multicast MAC Hash Filter Register 1"
group.long 0x1E00++0x07
line.long 0x00 "PSI0VHFR0,Port Station Interface 0 VLAN Hash Filter Register 0"
line.long 0x04 "PSI0VHFR1,Port Station Interface 0 VLAN Hash Filter Register 1"
group.long 0x1F00++0x03
line.long 0x00 "MAC_MERGE_MMCSR,Port MAC Merge Control And Status Register"
bitfld.long 0x00 31. "LINK_FAIL,Link fail" "Not failed,Failed"
hexmask.long.word 0x00 23.--29. 1. "VT,Verify time"
newline
rbitfld.long 0x00 21.--22. "TXSTS,Merge status" "Inactive,Active,?..."
rbitfld.long 0x00 18.--20. "VSTS,Verify status" "Disabled,,In progress,Successful,Failed,Undefined state,?..."
newline
bitfld.long 0x00 17. "VDIS,Verify disabled" "No,Yes"
bitfld.long 0x00 16. "ME,Merge enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 8.--9. "RAFS,Remote additional fragment size" "0,1,2,3"
bitfld.long 0x00 7. "RPA,Remote preemption active" "Inactive,Active"
newline
bitfld.long 0x00 6. "RPE,Remote preemption enabled" "Disabled,Enabled"
bitfld.long 0x00 5. "RPS,Remote preemption supported" "Not supported,Supported"
newline
rbitfld.long 0x00 3.--4. "LAFS,Local additional fragment size" "0,1,2,3"
rbitfld.long 0x00 2. "LPA,Local preemption active" "Inactive,Active"
newline
rbitfld.long 0x00 1. "LPE,Local preemption enabled" "Disabled,Enabled"
rbitfld.long 0x00 0. "LPS,Local preemption supported" "Not supported,Supported"
group.long 0x1F08++0x17
line.long 0x00 "MAC_MERGE_MMFAECR,Port MAC Merge Frame Assembly Error Count Register"
line.long 0x04 "MAC_MERGE_MMFSECR,Port MAC Merge Frame SMD Error Count Register"
line.long 0x08 "MAC_MERGE_MMFAOCR,Port MAC Merge Frame Assembly OK Count Register"
line.long 0x0C "MAC_MERGE_MMFCRXR,Port MAC Merge Fragment Count RX Register"
line.long 0x10 "MAC_MERGE_MMFCTXR,Part MAC Merge Fragment Count TX Register"
line.long 0x14 "MAC_MERGE_MMHCR,Port MAC Merge Hold Count Register"
repeat 8. (increment 0x2020 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PTC$2MSDUR,Port Traffic Class $2 Maximum SDU Register"
hexmask.long.word 0x00 0.--15. 1. "MAXSDU,Maximum SDU"
repeat.end
group.long 0x3000++0x03
line.long 0x00 "PAR_VXLAN_DP,VXLAN DP Configuration"
hexmask.long.word 0x00 16.--31. 1. "VXLAN_DP_1,Configured VXLAN DP 1"
hexmask.long.word 0x00 0.--15. 1. "VXLAN_DP_2,Configured VXLAN DP 2"
group.long 0x3024++0x03
line.long 0x00 "PAR_UDP_IPSEC,UDP IPsec"
bitfld.long 0x00 29. "SPPR,Short packet padding removal from checksum calculation" "Not removed,Removed"
repeat 4. (increment 0x303C 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PAR_CUSTETYPE$2,CustEtype $2"
hexmask.long.word 0x00 16.--31. 1. "ETYPE,ETYPE"
bitfld.long 0x00 5. "EN,Detection and mapping enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--3. "CP,Non IP code point" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x3050++0x03
line.long 0x00 "PAR_PORT_CFG,Port Configuration"
bitfld.long 0x00 1. "L3CD,Layer 3 checksum disable" "No,Yes"
bitfld.long 0x00 0. "L4CD,Layer 4 checksum disable" "No,Yes"
group.long 0x8008++0x03
line.long 0x00 "PM0_COMMAND_CONFIG,Port MAC 0 Command And Configuration Register"
bitfld.long 0x00 31. "MG,Magic packet detection enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RXSTP,Rx stop" "Not stopped,Stopped"
newline
bitfld.long 0x00 24. "REG_LOWP_RXETY,Rx low power indication assert" "Low Power Idle,FIFO empty"
bitfld.long 0x00 23. "TX_LOWP_ENA,Transmit low power idle enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "SFD,SFD character check disable at frame start" "No,Yes"
bitfld.long 0x00 17. "NO_LEN_CHK,Payload length check disable" "No,Yes"
newline
bitfld.long 0x00 16. "SEND_IDLE,Frame transmissions suppress and force IDLE" "Not sent,Sent"
bitfld.long 0x00 13. "CNT_FRM_EN,Control frame reception enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "SWR,Software reset" "No reset,Reset"
bitfld.long 0x00 11. "TXP,Padding of frames in transmit direction enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "XGLP,XGMII/GMII loopback enable" "Disabled,Enabled"
bitfld.long 0x00 9. "TX_ADDR_INS,Transmit source MAC address insertion" "Transmit,Overwrite"
newline
bitfld.long 0x00 8. "PAUSE_IGN,Ignore pause frame quanta" "Not ignored,Ignored"
bitfld.long 0x00 7. "PAUSE_FWD,Terminate/forward received pause frames" "Terminated,Forwarded"
newline
bitfld.long 0x00 6. "CRC,Terminate/forward CRC of received frames" "Terminated,Forwarded"
bitfld.long 0x00 5. "PAD,Frame padding removal in receive path enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "PROMIS,Promiscuous operation enable" "Disabled,Enabled"
bitfld.long 0x00 3. "WAN,WAN mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "RX_EN,MAC receive path enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_EN,MAC transmit path enable" "Disabled,Enabled"
group.long 0x9008++0x03
line.long 0x00 "PM1_COMMAND_CONFIG,Port MAC 1 Command And Configuration Register"
bitfld.long 0x00 31. "MG,Magic packet detection enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RXSTP,Rx stop" "Not stopped,Stopped"
newline
bitfld.long 0x00 24. "REG_LOWP_RXETY,Rx low power indication assert" "Low Power Idle,FIFO empty"
bitfld.long 0x00 23. "TX_LOWP_ENA,Transmit low power idle enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "SFD,SFD character check disable at frame start" "No,Yes"
bitfld.long 0x00 17. "NO_LEN_CHK,Payload length check disable" "No,Yes"
newline
bitfld.long 0x00 16. "SEND_IDLE,Frame transmissions suppress and force IDLE" "Not sent,Sent"
bitfld.long 0x00 13. "CNT_FRM_EN,Control frame reception enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "SWR,Software reset" "No reset,Reset"
bitfld.long 0x00 11. "TXP,Padding of frames in transmit direction enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "XGLP,XGMII/GMII loopback enable" "Disabled,Enabled"
bitfld.long 0x00 9. "TX_ADDR_INS,Transmit source MAC address insertion" "Transmit,Overwrite"
newline
bitfld.long 0x00 8. "PAUSE_IGN,Ignore pause frame quanta" "Not ignored,Ignored"
bitfld.long 0x00 7. "PAUSE_FWD,Terminate/forward received pause frames" "Terminated,Forwarded"
newline
bitfld.long 0x00 6. "CRC,Terminate/forward CRC of received frames" "Terminated,Forwarded"
bitfld.long 0x00 5. "PAD,Frame padding removal in receive path enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "PROMIS,Promiscuous operation enable" "Disabled,Enabled"
bitfld.long 0x00 3. "WAN,WAN mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "RX_EN,MAC receive path enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_EN,MAC transmit path enable" "Disabled,Enabled"
group.long 0x8014++0x03
line.long 0x00 "PM0_MAXFRM,Port MAC 0 Maximum Frame Length Register"
hexmask.long.word 0x00 16.--31. 1. "TX_MTU,Maximum length on transmit"
hexmask.long.word 0x00 0.--15. 1. "MAXFRM,Maximum supported received frame length"
group.long 0x9014++0x03
line.long 0x00 "PM1_MAXFRM,Port MAC 1 Maximum Frame Length Register"
hexmask.long.word 0x00 16.--31. 1. "TX_MTU,Maximum length on transmit"
hexmask.long.word 0x00 0.--15. 1. "MAXFRM,Maximum supported received frame length"
group.long 0x801C++0x03
line.long 0x00 "PM0_RX_FIFO_SECTIONS,Port MAC a Receive FIFO Threshold Configuration Register"
bitfld.long 0x00 16.--20. "RX_SECTION_AVAIL,Receive FIFO available" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x901C++0x03
line.long 0x00 "PM1_RX_FIFO_SECTIONS,Port MAC a Receive FIFO Threshold Configuration Register"
bitfld.long 0x00 16.--20. "RX_SECTION_AVAIL,Receive FIFO available" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x8030++0x0B
line.long 0x00 "PM0_MDIO_CFG,Port MAC 0 Internal MDIO Configuration Register"
rbitfld.long 0x00 31. "BSY1,MDIO busy" "Idle,Busy"
eventfld.long 0x00 30. "CMP,MDIO command completion event" "Not occurred,Occurred"
newline
bitfld.long 0x00 29. "CIM,MDIO command completion interrupt mask" "Masked,Enabled"
rbitfld.long 0x00 23. "NEG,MDIO driven by master on MDC negative edge" "Not driven,Driven"
newline
rbitfld.long 0x00 22. "EHOLD,External MDIO hold time (enet_clk cycles)" "Internal,External"
hexmask.long.word 0x00 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor"
newline
bitfld.long 0x00 6. "ENC45,Clause 45 support enable" "Disabled,Enabled"
bitfld.long 0x00 5. "PRE_DIS,MDIO preamble disable" "No,Yes"
newline
bitfld.long 0x00 2.--4. "MDIO_HOLD,MDIO hold time (enet_clk cycles)" "1,3,5,7,9,11,13,15"
rbitfld.long 0x00 0. "BSY2,MDIO busy" "Idle,Busy"
line.long 0x04 "PM0_MDIO_CTL,Port MAC 0 Internal MDIO Interface Control Register"
rbitfld.long 0x04 31. "BSY,MDIO busy" "Idle,Busy"
bitfld.long 0x04 15. "READ,MDIO read initiation" ",Initiated"
newline
bitfld.long 0x04 14. "POST_INC,MDIO read with address post-increment initiation" "Not initiated,Initiated"
bitfld.long 0x04 5.--9. "PORT_ADDR,MDIO port address (clause 45)/PHY address (clause 22)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x04 0.--4. "DEV_ADDR,MDIO device address (clause 45)/Register address (clause 22)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x08 "PM0_MDIO_DATA,Port MAC 0 Internal MDIO Interface Data Register"
rbitfld.long 0x08 31. "BSY,MDIO busy" "Idle,Busy"
hexmask.long.word 0x08 0.--15. 1. "MDIO_DATA,MDIO data (16-bit)"
wgroup.long 0x803C++0x03
line.long 0x00 "PM0_MDIO_ADDR,Port MAC 0 Internal MDIO Register Address Register"
group.long 0x8040++0x07
line.long 0x00 "PM0_IEVENT,Port MAC 0 Interrupt Event Register"
eventfld.long 0x00 31. "LT,XGMII - link training event" "Not received,Received"
eventfld.long 0x00 30. "AN,XGMII - auto negotiation event" "Not occurred,Occurred"
newline
eventfld.long 0x00 29. "PCS,XGMII - PCS event" "Not occurred,Occurred"
eventfld.long 0x00 14. "MGI,Magic packet detection indication event" "Not detected,Detected"
newline
eventfld.long 0x00 12. "RX_OVFL,Receive FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 11. "TX_UNFL,Transmit FIFO underflow event" "Not underflowed,Underflowed"
newline
eventfld.long 0x00 10. "TX_OVFL,Transmit FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 7. "LI_FAULT,Link interruption fault event (XGMII)" "Not occurred,Occurred"
newline
rbitfld.long 0x00 6. "RX_EMPTY,Receive FIFO empty event" "Not occurred,Occurred"
rbitfld.long 0x00 5. "TX_EMPTY,Transmit FIFO empty event" "Not occurred,Occurred"
newline
rbitfld.long 0x00 4. "RX_LOWP,Low power idle event" "Not occurred,Occurred"
eventfld.long 0x00 2. "PHY_LOS,Phy loss of signal event" "Not occurred,Occurred"
newline
eventfld.long 0x00 1. "REM_FAULT,Remote fault event (XGMII)" "Not occurred,Occurred"
eventfld.long 0x00 0. "LOC_FAULT,Local fault event (XGMII)" "Not occurred,Occurred"
line.long 0x04 "PM0_TX_IPG_LENGTH,Port MAC 0 Transmit Inter-Packet Gap Length Register"
hexmask.long.byte 0x04 0.--6. 1. "IPG_LEN,Transmit inter-packet gap value"
group.long (0x8040+0x0C)++0x03
line.long 0x00 "PM0_IMASK,Port MAC 0 Interrupt Mask Register"
bitfld.long 0x00 30. "MGI,Magic packet detection indication normal interrupt mask" "Masked,Enabled"
bitfld.long 0x00 15. "PCS,XGMII - PCS event interrupt mask" "Masked,Enabled"
newline
bitfld.long 0x00 14. "AN,XGMII - auto negotiation event interrupt mask" "Masked,Enabled"
bitfld.long 0x00 13. "LT,XGMII - link training event interrupt mask" "Masked,Enabled"
group.long (0x8040+0x14)++0x03
line.long 0x00 "PM0_PAUSE_QUANTA,Port MAC 0 Pause Quanta Register"
hexmask.long.word 0x00 0.--15. 1. "PQNT,Quanta value used when XOFF is triggered"
group.long (0x8040+0x24)++0x03
line.long 0x00 "PM0_PAUSE_THRESH,Port MAC 0 Pause Quanta Threshold Register"
hexmask.long.word 0x00 0.--15. 1. "QTH,Refresh pause frame sending value"
group.long (0x8040+0x34)++0x03
line.long 0x00 "PM0_RX_PAUSE_STATUS,Port MAC 0 Receive Pause Status Register"
rbitfld.long 0x00 0. "PSTAT,Pause status" "Not paused,Paused"
group.long (0x8040+0x78)++0x0F
line.long 0x00 "PM0_LPWAKE_TIMER,Port MAC 0 EEE Low Power Wakeup Timer Register"
hexmask.long.tbyte 0x00 0.--23. 1. "TW_SYS_TX,Enet_clk cycles number required by PHY"
line.long 0x04 "PM0_SLEEP_TIMER,Port MAC 0 Transmit EEE Low Power Timer Register"
hexmask.long.tbyte 0x04 0.--23. 1. "SLEEPT,Enet_clk cycles number where Tx is idle"
line.long 0x08 "PM0_SINGLE_STEP,Port MAC 0 IEEE1588 Single-Step Control Register"
bitfld.long 0x08 31. "EN,IEEE-1588 single-step enable" "Disabled,Enabled"
hexmask.long.byte 0x08 8.--15. 0x01 "OFFSET,Start offset from the beginning of a frame"
newline
bitfld.long 0x08 7. "CH,Checksum update" "Not required,Required"
line.long 0x0C "PM0_PEER_DELAY,Port MAC 0 IEEE1588 Single-Step Peer Delay Register"
hexmask.long 0x0C 0.--29. 1. "PEERDELAY,Value added to the correction field in addition to the transient time update"
group.long (0x8040+0xA0)++0x03
line.long 0x00 "PM0_STATN_CONFIG,Port MAC 0 Statistics Configuration Register"
eventfld.long 0x00 2. "CLR,Reset all counters" "No reset,Reset"
bitfld.long 0x00 1. "COD,Counter reset by read" "No reset,Reset"
newline
bitfld.long 0x00 0. "SAT,Saturate counters" "No,Yes"
group.long 0x9040++0x07
line.long 0x00 "PM1_IEVENT,Port MAC 1 Interrupt Event Register"
eventfld.long 0x00 31. "LT,XGMII - link training event" "Not received,Received"
eventfld.long 0x00 30. "AN,XGMII - auto negotiation event" "Not occurred,Occurred"
newline
eventfld.long 0x00 29. "PCS,XGMII - PCS event" "Not occurred,Occurred"
eventfld.long 0x00 14. "MGI,Magic packet detection indication event" "Not detected,Detected"
newline
eventfld.long 0x00 12. "RX_OVFL,Receive FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 11. "TX_UNFL,Transmit FIFO underflow event" "Not underflowed,Underflowed"
newline
eventfld.long 0x00 10. "TX_OVFL,Transmit FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 7. "LI_FAULT,Link interruption fault event (XGMII)" "Not occurred,Occurred"
newline
rbitfld.long 0x00 6. "RX_EMPTY,Receive FIFO empty event" "Not occurred,Occurred"
rbitfld.long 0x00 5. "TX_EMPTY,Transmit FIFO empty event" "Not occurred,Occurred"
newline
rbitfld.long 0x00 4. "RX_LOWP,Low power idle event" "Not occurred,Occurred"
eventfld.long 0x00 2. "PHY_LOS,Phy loss of signal event" "Not occurred,Occurred"
newline
eventfld.long 0x00 1. "REM_FAULT,Remote fault event (XGMII)" "Not occurred,Occurred"
eventfld.long 0x00 0. "LOC_FAULT,Local fault event (XGMII)" "Not occurred,Occurred"
line.long 0x04 "PM1_TX_IPG_LENGTH,Port MAC 1 Transmit Inter-Packet Gap Length Register"
hexmask.long.byte 0x04 0.--6. 1. "IPG_LEN,Transmit inter-packet gap value"
group.long (0x9040+0x0C)++0x03
line.long 0x00 "PM1_IMASK,Port MAC 1 Interrupt Mask Register"
bitfld.long 0x00 30. "MGI,Magic packet detection indication normal interrupt mask" "Masked,Enabled"
bitfld.long 0x00 15. "PCS,XGMII - PCS event interrupt mask" "Masked,Enabled"
newline
bitfld.long 0x00 14. "AN,XGMII - auto negotiation event interrupt mask" "Masked,Enabled"
bitfld.long 0x00 13. "LT,XGMII - link training event interrupt mask" "Masked,Enabled"
group.long (0x9040+0x14)++0x03
line.long 0x00 "PM1_PAUSE_QUANTA,Port MAC 1 Pause Quanta Register"
hexmask.long.word 0x00 0.--15. 1. "PQNT,Quanta value used when XOFF is triggered"
group.long (0x9040+0x24)++0x03
line.long 0x00 "PM1_PAUSE_THRESH,Port MAC 1 Pause Quanta Threshold Register"
hexmask.long.word 0x00 0.--15. 1. "QTH,Refresh pause frame sending value"
group.long (0x9040+0x34)++0x03
line.long 0x00 "PM1_RX_PAUSE_STATUS,Port MAC 1 Receive Pause Status Register"
rbitfld.long 0x00 0. "PSTAT,Pause status" "Not paused,Paused"
group.long (0x9040+0x78)++0x0F
line.long 0x00 "PM1_LPWAKE_TIMER,Port MAC 1 EEE Low Power Wakeup Timer Register"
hexmask.long.tbyte 0x00 0.--23. 1. "TW_SYS_TX,Enet_clk cycles number required by PHY"
line.long 0x04 "PM1_SLEEP_TIMER,Port MAC 1 Transmit EEE Low Power Timer Register"
hexmask.long.tbyte 0x04 0.--23. 1. "SLEEPT,Enet_clk cycles number where Tx is idle"
line.long 0x08 "PM1_SINGLE_STEP,Port MAC 1 IEEE1588 Single-Step Control Register"
bitfld.long 0x08 31. "EN,IEEE-1588 single-step enable" "Disabled,Enabled"
hexmask.long.byte 0x08 8.--15. 0x01 "OFFSET,Start offset from the beginning of a frame"
newline
bitfld.long 0x08 7. "CH,Checksum update" "Not required,Required"
line.long 0x0C "PM1_PEER_DELAY,Port MAC 1 IEEE1588 Single-Step Peer Delay Register"
hexmask.long 0x0C 0.--29. 1. "PEERDELAY,Value added to the correction field in addition to the transient time update"
group.long (0x9040+0xA0)++0x03
line.long 0x00 "PM1_STATN_CONFIG,Port MAC 1 Statistics Configuration Register"
eventfld.long 0x00 2. "CLR,Reset all counters" "No reset,Reset"
bitfld.long 0x00 1. "COD,Counter reset by read" "No reset,Reset"
newline
bitfld.long 0x00 0. "SAT,Saturate counters" "No,Yes"
rgroup.quad 0x8100++0xCF
line.quad 0x00 "PM0_REOCTN,Port MAC 0 Receive Ethernet Octets Counter Register"
line.quad 0x08 "PM0_ROCTN,Port MAC 0 Receive Octets Counter Register"
line.quad 0x10 "PM0_RALNN,Port MAC 0 Receive Alignment Error Counter Register"
line.quad 0x18 "PM0_RXPFN,Port MAC 0 Receive Valid Pause Frame Counter Register"
line.quad 0x20 "PM0_RFRMN,Port MAC 0 Receive Frame Counter Register"
line.quad 0x28 "PM0_RFCSN,Port MAC 0 Receive Frame Check Sequence Error Counter Register"
line.quad 0x30 "PM0_RVLANN,Port MAC 0 Receive VLAN Frame Counter Register"
line.quad 0x38 "PM0_RERRN,Port MAC 0 Receive Frame Error Counter Register"
line.quad 0x40 "PM0_RUCAN,Port MAC 0 Receive Unicast Frame Counter Register"
line.quad 0x48 "PM0_RMCAN,Port MAC 0 Receive Multicast Frame Counter Register"
line.quad 0x50 "PM0_RBCAN,Port MAC 0 Receive Broadcast Frame Counter Register"
line.quad 0x58 "PM0_RDRPN,Port MAC 0 Receive Dropped Packets Counter Register"
line.quad 0x60 "PM0_RPKTN,Port MAC 0 Receive Packets Counter Register"
line.quad 0x68 "PM0_RUNDN,Port MAC 0 Receive Undersized Packet Counter Register"
line.quad 0x70 "PM0_R64N,Port MAC 0 Receive 64-Octet Packet Counter Register"
line.quad 0x78 "PM0_R127N,Port MAC 0 Receive 65 to 127-Octet Packet Counter Register"
line.quad 0x80 "PM0_R255N,Port MAC 0 Receive 128 To 255-Octet Packet Counter Register"
line.quad 0x88 "PM0_R511N,Port MAC 0 Receive 256 To 511-Octet Packet Counter Register"
line.quad 0x90 "PM0_R1023N,Port MAC 0 Receive 512 To 1023-Octet Packet Counter Register"
line.quad 0x98 "PM0_R1522N,Port MAC 0 Receive 1024 To 1522-Octet Packet Counter Register"
line.quad 0xA0 "PM0_R1523XN,Port MAC 0 Receive 1523 To Max-Octet Packet Counter Register"
line.quad 0xA8 "PM0_ROVRN,Port MAC 0 Receive Oversized Packet Counter Register"
line.quad 0xB0 "PM0_RJBRN,Port MAC 0 Receive Jabber Packet Counter Register"
line.quad 0xB8 "PM0_RFRGN,Port MAC 0 Receive Fragment Packet Counter Register"
line.quad 0xC0 "PM0_RCNPN,Port MAC 0 Receive Control Packet Counter Register"
line.quad 0xC8 "PM0_RDRNTPN,Port MAC 0 Receive Dropped Not Truncated Packets Counter Register"
rgroup.quad (0x8100+0x100)++0x0F
line.quad 0x00 "PM0_TEOCTN,Port MAC 0 Transmit Ethernet Octets Counter Register"
line.quad 0x08 "PM0_TOCTN,Port MAC 0 Transmit Octets Counter Register"
rgroup.quad (0x8100+0x118)++0x3F
line.quad 0x00 "PM0_TXPFN,Port MAC 0 Transmit Valid Pause Frame Counter Register"
line.quad 0x08 "PM0_TFRMN,Port MAC 0 Transmit Frame Counter Register"
line.quad 0x10 "PM0_TFCSN,Port MAC 0 Transmit Frame Check Sequence Error Counter"
line.quad 0x18 "PM0_TVLANN,Port MAC 0 Transmit VLAN Frame Counter Register"
line.quad 0x20 "PM0_TERRN,Port MAC 0 Transmit Frame Error Counter Register"
line.quad 0x28 "PM0_TUCAN,Port MAC 0 Transmit Unicast Frame Counter Register"
line.quad 0x30 "PM0_TMCAN,Port MAC 0 Transmit Multicast Frame Counter Register"
line.quad 0x38 "PM0_TBCAN,Port MAC 0 Transmit Broadcast Frame Counter Register"
rgroup.quad (0x8100+0x160)++0x47
line.quad 0x00 "PM0_TPKTN,Port MAC 0 Transmit Packets Counter Register"
line.quad 0x08 "PM0_TUNDN,Port MAC 0 Transmit Undersized Packet Counter Register"
line.quad 0x10 "PM0_T64N,Port MAC 0 Transmit 64-Octet Packet Counter Register"
line.quad 0x18 "PM0_T127N,Port MAC 0 Transmit 65 To 127-Octet Packet Counter Register"
line.quad 0x20 "PM0_T255N,Port MAC 0 Transmit 128 To 255-Octet Packet Counter Register"
line.quad 0x28 "PM0_T511N,Port MAC 0 Transmit 256 To 511-Octet Packet Counter Register"
line.quad 0x30 "PM0_T1023N,Port MAC 0 Transmit 512 To 1023-Octet Packet Counter Register"
line.quad 0x38 "PM0_T1522N,Port MAC 0 Transmit 1024 To 1522-Octet Packet Counter Register"
line.quad 0x40 "PM0_T1523N,Port MAC 0 Transmit 1523 To TX_MTU-Octet Packet Counter Register"
rgroup.quad (0x8100+0x1C0)++0x07
line.quad 0x00 "PM0_TCNPN,Port MAC 0 Transmit Control Packet Counter Register"
rgroup.quad 0x9100++0xCF
line.quad 0x00 "PM1_REOCTN,Port MAC 1 Receive Ethernet Octets Counter Register"
line.quad 0x08 "PM1_ROCTN,Port MAC 1 Receive Octets Counter Register"
line.quad 0x10 "PM1_RALNN,Port MAC 1 Receive Alignment Error Counter Register"
line.quad 0x18 "PM1_RXPFN,Port MAC 1 Receive Valid Pause Frame Counter Register"
line.quad 0x20 "PM1_RFRMN,Port MAC 1 Receive Frame Counter Register"
line.quad 0x28 "PM1_RFCSN,Port MAC 1 Receive Frame Check Sequence Error Counter Register"
line.quad 0x30 "PM1_RVLANN,Port MAC 1 Receive VLAN Frame Counter Register"
line.quad 0x38 "PM1_RERRN,Port MAC 1 Receive Frame Error Counter Register"
line.quad 0x40 "PM1_RUCAN,Port MAC 1 Receive Unicast Frame Counter Register"
line.quad 0x48 "PM1_RMCAN,Port MAC 1 Receive Multicast Frame Counter Register"
line.quad 0x50 "PM1_RBCAN,Port MAC 1 Receive Broadcast Frame Counter Register"
line.quad 0x58 "PM1_RDRPN,Port MAC 1 Receive Dropped Packets Counter Register"
line.quad 0x60 "PM1_RPKTN,Port MAC 1 Receive Packets Counter Register"
line.quad 0x68 "PM1_RUNDN,Port MAC 1 Receive Undersized Packet Counter Register"
line.quad 0x70 "PM1_R64N,Port MAC 1 Receive 64-Octet Packet Counter Register"
line.quad 0x78 "PM1_R127N,Port MAC 1 Receive 65 to 127-Octet Packet Counter Register"
line.quad 0x80 "PM1_R255N,Port MAC 1 Receive 128 To 255-Octet Packet Counter Register"
line.quad 0x88 "PM1_R511N,Port MAC 1 Receive 256 To 511-Octet Packet Counter Register"
line.quad 0x90 "PM1_R1023N,Port MAC 1 Receive 512 To 1023-Octet Packet Counter Register"
line.quad 0x98 "PM1_R1522N,Port MAC 1 Receive 1024 To 1522-Octet Packet Counter Register"
line.quad 0xA0 "PM1_R1523XN,Port MAC 1 Receive 1523 To Max-Octet Packet Counter Register"
line.quad 0xA8 "PM1_ROVRN,Port MAC 1 Receive Oversized Packet Counter Register"
line.quad 0xB0 "PM1_RJBRN,Port MAC 1 Receive Jabber Packet Counter Register"
line.quad 0xB8 "PM1_RFRGN,Port MAC 1 Receive Fragment Packet Counter Register"
line.quad 0xC0 "PM1_RCNPN,Port MAC 1 Receive Control Packet Counter Register"
line.quad 0xC8 "PM1_RDRNTPN,Port MAC 1 Receive Dropped Not Truncated Packets Counter Register"
rgroup.quad (0x9100+0x100)++0x0F
line.quad 0x00 "PM1_TEOCTN,Port MAC 1 Transmit Ethernet Octets Counter Register"
line.quad 0x08 "PM1_TOCTN,Port MAC 1 Transmit Octets Counter Register"
rgroup.quad (0x9100+0x118)++0x3F
line.quad 0x00 "PM1_TXPFN,Port MAC 1 Transmit Valid Pause Frame Counter Register"
line.quad 0x08 "PM1_TFRMN,Port MAC 1 Transmit Frame Counter Register"
line.quad 0x10 "PM1_TFCSN,Port MAC 1 Transmit Frame Check Sequence Error Counter"
line.quad 0x18 "PM1_TVLANN,Port MAC 1 Transmit VLAN Frame Counter Register"
line.quad 0x20 "PM1_TERRN,Port MAC 1 Transmit Frame Error Counter Register"
line.quad 0x28 "PM1_TUCAN,Port MAC 1 Transmit Unicast Frame Counter Register"
line.quad 0x30 "PM1_TMCAN,Port MAC 1 Transmit Multicast Frame Counter Register"
line.quad 0x38 "PM1_TBCAN,Port MAC 1 Transmit Broadcast Frame Counter Register"
rgroup.quad (0x9100+0x160)++0x47
line.quad 0x00 "PM1_TPKTN,Port MAC 1 Transmit Packets Counter Register"
line.quad 0x08 "PM1_TUNDN,Port MAC 1 Transmit Undersized Packet Counter Register"
line.quad 0x10 "PM1_T64N,Port MAC 1 Transmit 64-Octet Packet Counter Register"
line.quad 0x18 "PM1_T127N,Port MAC 1 Transmit 65 To 127-Octet Packet Counter Register"
line.quad 0x20 "PM1_T255N,Port MAC 1 Transmit 128 To 255-Octet Packet Counter Register"
line.quad 0x28 "PM1_T511N,Port MAC 1 Transmit 256 To 511-Octet Packet Counter Register"
line.quad 0x30 "PM1_T1023N,Port MAC 1 Transmit 512 To 1023-Octet Packet Counter Register"
line.quad 0x38 "PM1_T1522N,Port MAC 1 Transmit 1024 To 1522-Octet Packet Counter Register"
line.quad 0x40 "PM1_T1523N,Port MAC 1 Transmit 1523 To TX_MTU-Octet Packet Counter Register"
rgroup.quad (0x9100+0x1C0)++0x07
line.quad 0x00 "PM1_TCNPN,Port MAC 1 Transmit Control Packet Counter Register"
if (((per.l(ad:0x1F8080000+0x8300))&0x8000)==0x00)
group.long 0x8300++0x03
line.long 0x00 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 13.--14. "SSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "SFD,Full duplex RGMII mode force" ",Forced"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
else
group.long 0x8300++0x03
line.long 0x00 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
endif
rgroup.long 0x8304++0x03
line.long 0x00 "PM0_IF_STATUS,Port MAC 0 Interface Status Register"
bitfld.long 0x00 15. "RGLINK,Valid link established" "No,Yes"
bitfld.long 0x00 13.--14. "RGSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "RGFD,RGMII full duplex link established" "No link/Half-duplex,Full-duplex"
if (((per.l(ad:0x1F8080000+0x9300))&0x8000)==0x00)
group.long 0x9300++0x03
line.long 0x00 "PM1_IF_MODE,Port MAC 1 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 13.--14. "SSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "SFD,Full duplex RGMII mode force" "Not forced,Forced"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
else
group.long 0x9300++0x03
line.long 0x00 "PM1_IF_MODE,Port MAC 1 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
endif
rgroup.long 0x9304++0x03
line.long 0x00 "PM1_IF_STATUS,Port MAC 1 Interface Status Register"
bitfld.long 0x00 15. "RGLINK,Valid link established" "No,Yes"
bitfld.long 0x00 13.--14. "RGSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "RGFD,RGMII full duplex link established" "No link/Half-duplex,Full-duplex"
tree.end
tree "ENETC_PF6"
base ad:0x1F8060000
group.long 0x00++0x03
line.long 0x00 "PMR,Port Mode Register"
bitfld.long 0x00 16. "SI0EN,Station interface 0 enable" "Disabled,Enabled"
bitfld.long 0x00 8.--11. "PSPEED,Port speed" "10Mbps,100Mbps,1000Mbps,10Gbps,2.5Gbps,5Gbps,?..."
rgroup.long 0x04++0x03
line.long 0x00 "PSR,Port Status Register"
bitfld.long 0x00 1. "RX_BUSY,Receive busy" "Idle,Busy"
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
group.long 0x14++0x0B
line.long 0x00 "PPFALOR,Port Per-Frame Accounting Length Overhead Register"
bitfld.long 0x00 31. "PFALOE,Per-frame accounting length overhead enable" "Disabled,Enabled"
hexmask.long.byte 0x00 0.--7. 1. "BCO,Byte count overhead"
line.long 0x04 "PSIPMMR,Port Station Interface Promiscuous MAC Mode Register"
bitfld.long 0x04 16. "SI0_MAC_MP,SI 0 MAC multicast promiscuous" "Not qualified,Qualified"
bitfld.long 0x04 0. "SI0_MAC_UP,SI 0 MAC unicast promiscuous" "Not qualified,Qualified"
line.long 0x08 "PSIPVMR,Port Station Interface Promiscuous VLAN Mode Register"
bitfld.long 0x08 16. "SI0_VLAN_UTA,SI 0 untagged frames (no VLAN) accepted" "Not qualified,Qualified"
bitfld.long 0x08 0. "SI0_VLAN_P,SI 0 VLAN promiscuous" "Not qualified,Qualified"
group.long 0x100++0x03
line.long 0x00 "PSI0PMAR0,Port Station Interface 0 Primary MAC Address Register 0"
group.long 0x104++0x03
line.long 0x00 "PSI0PMAR1,Port Station Interface 0 Primary MAC Address Register 1"
hexmask.long.word 0x00 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
group.long 0x200++0x0B
line.long 0x00 "PONVLANR,Port Outer Native VLAN Register"
bitfld.long 0x00 19. "VZE,Port outer native VLAN VID used" "Not used,Used"
bitfld.long 0x00 18. "PNE,Port outer native VLAN used" "Not used,Used"
newline
bitfld.long 0x00 16.--17. "TPID,VLAN Ethertype used" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR.ETYPE"
bitfld.long 0x00 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12. "DEI,Drop eligible indicator" "Not eligible,Eligible"
hexmask.long.word 0x00 0.--11. 1. "VID,VLAN identifier"
line.long 0x04 "PINVLANR,Port Inner Native VLAN Register"
bitfld.long 0x04 19. "VZE,Port outer native VLAN VID used" "Not used,Used"
bitfld.long 0x04 18. "PNE,Port outer native VLAN used" "Not used,Used"
newline
bitfld.long 0x04 16.--17. "TPID,VLAN Ethertype used" "C-VLAN 0x8100,S-VLAN 0x88A8,VLAN defined by PCVLANR1.ETYPE,VLAN defined by PCVLANR2.ETYPE"
bitfld.long 0x04 13.--15. "PCP,Priority code point" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12. "DEI,Drop eligible indicator" "Not eligible,Eligible"
hexmask.long.word 0x04 0.--11. 1. "VID,VLAN identifier"
line.long 0x08 "PVCLCTR,Port VLAN Classification Control Register"
bitfld.long 0x08 9. "OAI,Outer as inner" "Not used,Used"
bitfld.long 0x08 8. "IV2,Inner VLAN must be second" "Nth,2nd"
newline
bitfld.long 0x08 7. "IVTPIDL[3],Custom VLAN as defined by PCVLANR2.ETYPE acceptable as inner VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 6. "[2],Custom VLAN as defined by PCVLANR1.ETYPE acceptable as inner VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 5. "[1],Standard S-VLAN 0x88A8 acceptable as inner VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 4. "[0],Standard C-VLAN 0x8100 acceptable as inner VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 3. "OVTPIDL[3],Custom VLAN as defined by PCVLANR2.ETYPE acceptable as outer VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 2. "[2],Custom VLAN as defined by PCVLANR1.ETYPE acceptable as outer VLAN tag" "Not accepted,Accepted"
newline
bitfld.long 0x08 1. "[1],Standard S-VLAN 0x88A8 acceptable as outer VLAN tag" "Not accepted,Accepted"
bitfld.long 0x08 0. "[0],Standard C-VLAN 0x8100 acceptable as outer VLAN tag" "Not accepted,Accepted"
repeat 2. (increment 0x210 0x04)(increment 1. 1.)
group.long $1++0x03
line.long 0x00 "PCVLANR$2,Port Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x408++0x03
line.long 0x00 "PQCMR,Port HTA QoS Congestion Mapping Register"
bitfld.long 0x00 21. "PRIORITY_MAP7,Mapping of priority value 7 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 18. "PRIORITY_MAP6,Mapping of priority value 6 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 15. "PRIORITY_MAP5,Mapping of priority value 5 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 12. "PRIORITY_MAP4,Mapping of priority value 4 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 9. "PRIORITY_MAP3,Mapping of priority value 3 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 6. "PRIORITY_MAP2,Mapping of priority value 2 to ICM receive port queue priority" "High,Low"
newline
bitfld.long 0x00 3. "PRIORITY_MAP1,Mapping of priority value 1 to ICM receive port queue priority" "High,Low"
bitfld.long 0x00 0. "PRIORITY_MAP0,Mapping of priority value 0 to ICM receive port queue priority" "High,Low"
group.long 0x410++0x07
line.long 0x00 "PPAUONTR,Port Pause ON Threshold Register"
hexmask.long 0x00 0.--27. 1. "THRESH,Amount of data accumulated in the internal receive buffer"
line.long 0x04 "PPAUOFFTR,Port Pause OFF Threshold Register"
hexmask.long 0x04 0.--27. 1. "THRESH,Amount of data accumulated in the internal receive buffer"
group.long 0x500++0x03
line.long 0x00 "PQOSMR,Port QoS Mode Register"
bitfld.long 0x00 8. "DTE,DSCP QoS classification enabled for VLAN tagged IP frames" "Disabled,Enabled"
bitfld.long 0x00 7. "DUE,DSCP QoS classification enabled for untagged VLAN IP frames" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--6. "DIPV,Default IPV" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--3. "DDR,Default Discard Resilience" "0,1,2,3"
newline
bitfld.long 0x00 1. "VE,VLAN enable" "Disabled,Enabled"
bitfld.long 0x00 0. "VS,VLAN tag select" "Inner,Outer"
group.long 0x510++0x0B
line.long 0x00 "PVLANIPVMR0,Port VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for receive data path 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for receive data path 6" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for receive data path 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for receive data path 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for receive data path 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for receive data path 2" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for receive data path 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for receive data path 0" "0,1,2,3,4,5,6,7"
line.long 0x04 "PVLANIPVMR1,Port VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for receive data path 15" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for receive data path 14" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for receive data path 13" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for receive data path 12" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for receive data path 11" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for receive data path 10" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for receive data path 9" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for receive data path 8" "0,1,2,3,4,5,6,7"
line.long 0x08 "PVLANDRMR,Port VLAN To DR Mapping Register"
bitfld.long 0x08 30.--31. "PCP_DEI_15,DR value used for receive data path 15" "0,1,2,3"
bitfld.long 0x08 28.--29. "PCP_DEI_14,DR value used for receive data path 14" "0,1,2,3"
newline
bitfld.long 0x08 26.--27. "PCP_DEI_13,DR value used for receive data path 13" "0,1,2,3"
bitfld.long 0x08 24.--25. "PCP_DEI_12,DR value used for receive data path 12" "0,1,2,3"
newline
bitfld.long 0x08 22.--23. "PCP_DEI_11,DR value used for receive data path 11" "0,1,2,3"
bitfld.long 0x08 20.--21. "PCP_DEI_10,DR value used for receive data path 10" "0,1,2,3"
newline
bitfld.long 0x08 18.--19. "PCP_DEI_9,DR value used for receive data path 9" "0,1,2,3"
bitfld.long 0x08 16.--17. "PCP_DEI_8,DR value used for receive data path 8" "0,1,2,3"
newline
bitfld.long 0x08 14.--15. "PCP_DEI_7,DR value used for receive data path 7" "0,1,2,3"
bitfld.long 0x08 12.--13. "PCP_DEI_6,DR value used for receive data path 6" "0,1,2,3"
newline
bitfld.long 0x08 10.--11. "PCP_DEI_5,DR value used for receive data path 5" "0,1,2,3"
bitfld.long 0x08 8.--9. "PCP_DEI_4,DR value used for receive data path 4" "0,1,2,3"
newline
bitfld.long 0x08 6.--7. "PCP_DEI_3,DR value used for receive data path 3" "0,1,2,3"
bitfld.long 0x08 4.--5. "PCP_DEI_2,DR value used for receive data path 2" "0,1,2,3"
newline
bitfld.long 0x08 2.--3. "PCP_DEI_1,DR value used for receive data path 1" "0,1,2,3"
bitfld.long 0x08 0.--1. "PCP_DEI_0,DR value used for receive data path 0" "0,1,2,3"
rgroup.long 0x600++0x07
line.long 0x00 "PRXMBER,Port HTA Receive Memory Buffer Entitlement Register"
hexmask.long 0x00 0.--27. 1. "AMOUNT,Port receive memory buffer entitlement for each port (bytes)"
line.long 0x04 "PRXMBLR,Port HTA Receive Memory Buffer Limit Register"
hexmask.long 0x04 0.--27. 1. "LIMIT,Port receive memory buffer limit for each port (bytes)"
group.long 0x608++0x03
line.long 0x00 "PTXMBAR,Port HTA Transmit Memory Buffer Allocation Register"
hexmask.long 0x00 0.--27. 1. "ALLOC,Transmit buffer memory allocation for each port (bytes)"
rgroup.long 0x60C++0x03
line.long 0x00 "FMBDTR,Free Memory Buffer Depletion Threshold Register"
hexmask.long 0x00 0.--27. 1. "THRESH,Free buffer depletion threshold (bytes)"
rgroup.long 0x680++0x1F
line.long 0x00 "FMBCR,Free Memory Buffer Count Register"
line.long 0x04 "FMBCLWMR,Free Memory Buffer Count Low Watermark Register"
line.long 0x08 "UMBCR,Unassigned Memory Buffer Count Register"
line.long 0x0C "UMBCHWMR,Unassigned Memory Buffer Count High Watermark Register"
line.long 0x10 "PRXMBCR,Port HTA Receive Buffer Count Register"
hexmask.long 0x10 0.--27. 1. "COUNT,Current receive buffer usage count for this port (bytes)"
line.long 0x14 "PRXMBCHWMR,Port HTA Receive Buffer Count High Watermark Register"
hexmask.long 0x14 0.--27. 1. "WATERMARK,High watermark for receive buffer usage since the last read of this register (bytes)"
line.long 0x18 "PTXMBCR,Port HTA Transmit Memory Buffer Count Register"
hexmask.long 0x18 0.--27. 1. "COUNT,Current amount of transmit buffer memory in use (bytes)"
line.long 0x1C "PTXMBCHWMR,Port HTA Transmit Memory Buffer Count High Watermark"
hexmask.long 0x1C 0.--27. 1. "WATERMARK,High watermark for transmit buffer memory since the last read of this register (bytes)"
group.long 0x700++0x03
line.long 0x00 "PICDR0DCR,Port HTA Ingress Congestion DR0 Discard Count Register"
group.long 0x710++0x03
line.long 0x00 "PICDR1DCR,Port HTA Ingress Congestion DR1 Discard Count Register"
group.long 0x720++0x03
line.long 0x00 "PICDR2DCR,Port HTA Ingress Congestion DR2 Discard Count Register"
group.long 0x730++0x03
line.long 0x00 "PICDR3DCR,Port HTA Ingress Congestion DR3 Discard Count Register"
group.long 0x708++0x03
line.long 0x00 "PICDR0DCRRR,Port HTA Ingress Congestion DR0 Discard Count Read-Reset Register"
group.long 0x718++0x03
line.long 0x00 "PICDR1DCRRR,Port HTA Ingress Congestion DR1 Discard Count Read-Reset Register"
group.long 0x728++0x03
line.long 0x00 "PICDR2DCRRR,Port HTA Ingress Congestion DR2 Discard Count Read-Reset Register"
group.long 0x738++0x03
line.long 0x00 "PICDR3DCRRR,Port HTA Ingress Congestion DR3 Discard Count Read-Reset Register"
group.long 0x740++0x03
line.long 0x00 "PICPDSR,Port HTA Ingress Congestion Priority Discard Status Register"
eventfld.long 0x00 28. "DR3_P1DS,DR3 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 24. "DR3_P0DS,DR3 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 20. "DR2_P1DS,DR2 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 16. "DR2_P0DS,DR2 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 12. "DR1_P1DS,DR1 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 8. "DR1_P0DS,DR1 priority 0 discard status" "No clear,Clear"
newline
eventfld.long 0x00 4. "DR0_P1DS,DR0 priority 1 discard status" "No clear,Clear"
eventfld.long 0x00 0. "DR0_P0DS,DR0 priority 0 discard status" "No clear,Clear"
rgroup.long 0x810++0x03
line.long 0x00 "PBFDSIR,Port Broadcast Frame Drop SI Rejection Register"
rgroup.long 0x900++0x07
line.long 0x00 "PCAPR0,Port Capability Register 0"
hexmask.long.byte 0x00 24.--31. 1. "NUM_RX_BDR,Number of total receive buffer descriptor rings for the port"
hexmask.long.byte 0x00 16.--23. 1. "NUM_TX_BDR,Number of total transmit buffer descriptor rings for the port"
newline
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
newline
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci (Per-Stream Filtering and Policing)" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci (Per-Stream Filtering and Policing)" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
newline
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating (IEEE 802.1Qbv)" "Not supported,Supported"
newline
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload (GRO) support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload (GSO) support" "Not supported,Supported"
line.long 0x04 "PCAPR1,Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1K,2K,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multi-cast hash entries per SI" "64,128,256,512"
newline
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1(0),2(0-1),3(0-2),4(0-3),5(0-4),6(0-5),7(0-6),8(0-7)"
group.long 0x940++0x03
line.long 0x00 "PSI0CFGR0,Port Station Interface 0 Configuration Register 0"
bitfld.long 0x00 28.--31. "SIBW,Station interface traffic class bandwidth weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "SIVC[3],Custom VLAN as defined by PCVLANR2.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 26. "[2],Custom VLAN as defined by PCVLANR1.ETYPE inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
bitfld.long 0x00 25. "[1],Standard S-VLAN 0x88A8 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
newline
bitfld.long 0x00 24. "[0],Standard C-VLAN 0x8100 inserted by the SI driver in frame date/through Tx BD" "Not inserted,Inserted"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
newline
bitfld.long 0x00 15. "ASE,Anti-spoofing enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SIVIE,Software VLAN insertion enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SPE,Source pruning enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
group.long 0xE10++0x03
line.long 0x00 "PCMEDR,Port Correctable Memory Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Invalid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "No error,Error"
newline
bitfld.long 0x00 29. "RGD,Report global disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE30++0x03
line.long 0x00 "PUMEDR,Port Uncorrectable Memory Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Invalid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "No error,Error"
newline
bitfld.long 0x00 29. "RGD,Report global disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0x1000++0x03
line.long 0x00 "PIPVTCMR0,Port HTA Tx IPV To Traffic Class Mapping Register 0"
bitfld.long 0x00 28.--30. "IPV7TC,IPV7 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6TC,IPV6 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20.--22. "IPV5TC,IPV5 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4TC,IPV4 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3TC,IPV3 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2TC,IPV2 to traffic class mapping" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 4.--6. "IPV1TC,IPV1 to traffic class mapping" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0TC,IPV0 to traffic class mapping" "0,1,2,3,4,5,6,7"
repeat 8. (increment 0x1110 0x08)(increment 0. 1.)
group.long $1++0x07
line.long 0x00 "PTC$2CBSR0,Port Traffic Class $2 Credit Based Shaper Register 0"
bitfld.long 0x00 31. "CBSE,Credit based shaper enable" "Disabled,Enabled"
hexmask.long.byte 0x00 0.--6. 1. "BW,Bandwidth in percentage units"
line.long 0x04 "PTC$2CBSR1,Port Traffic Class $2 Credit Based Shaper Register 1"
repeat.end
repeat 8. (increment 0x1210 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PTC$2TSDR,Port Traffic Class $2 Time Specific Departure Register"
bitfld.long 0x00 31. "TSDE,Time specific departure enable" "Disabled,Enabled"
repeat.end
rgroup.long 0x1308++0x03
line.long 0x00 "PPMCAPR,Port Parse Match Capability Register"
bitfld.long 0x00 0.--3. "NUM_PSCM,Number of parse summary classification ternary match rules per port" "8,16,32,64,?..."
group.long 0x1400++0x03
line.long 0x00 "PRSSCR,Port RSS Control Register"
bitfld.long 0x00 9. "NON_IP_EN,Non-IP hash enable" "Disabled,Enabled"
bitfld.long 0x00 5. "IP6_DIS,IPv6 packet disable" "No,Yes"
newline
bitfld.long 0x00 4. "IP6UDP_DIS,IPv6 with UDP disable" "No,Yes"
bitfld.long 0x00 3. "IP4UDP_DIS,IPv4 with UDP disable" "No,Yes"
newline
bitfld.long 0x00 2. "IP6TCP_DIS,IPv6 with TCP packet disable" "No,Yes"
bitfld.long 0x00 1. "IP4_DIS,IPv4 packet disable" "No,Yes"
newline
bitfld.long 0x00 0. "IP4TCP_DIS,IPv4 with TCP packet disable" "No,Yes"
rgroup.long 0x1404++0x03
line.long 0x00 "PRSSCAPR,Port RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling (RSS) entries per SI" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 10. (increment 0x1410 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PRSSKR$2,Port RSS Key Register $2"
repeat.end
group.long 0x1500++0x0B
line.long 0x00 "PLPMR,Port Low Power Mode Register"
bitfld.long 0x00 4. "WDRE,Wake-on-LAN drop resilience enable" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "WDR,Wake-on-LAN drop resilience" "0,1,2,3"
newline
bitfld.long 0x00 1. "WME,Wake-on-LAN mode enable" "Disabled,Enabled"
line.long 0x04 "PWOFCR,Port Wake-On Filter Control Register"
bitfld.long 0x04 9. "MDCE,MLD DMAC check enable" "Disabled,Enabled"
bitfld.long 0x04 8. "HVME,Hash VLAN match enable" "Disabled,Enabled"
newline
bitfld.long 0x04 4. "MLDE,MLD request packet Wake-on-LAN enable" "Disabled,Enabled"
bitfld.long 0x04 3. "NDNSE,ND/NS request packet Wake-on-LAN enable" "Disabled,Enabled"
newline
bitfld.long 0x04 2. "ARPE,ARP request packet Wake-on-LAN enable" "Disabled,Enabled"
bitfld.long 0x04 1. "TSE,TCP SYN message Wake-on-LAN enable" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "MPE,Magic packet Wake-on-LAN enable" "Disabled,Enabled"
line.long 0x08 "PWOSR,Port Wake-On Status Register"
rbitfld.long 0x08 31. "WOLA,Wake-On-LAN active" "Inactive,Active"
rbitfld.long 0x08 30. "ICMB,ICM blocked" "Not blocked,Blocked"
newline
bitfld.long 0x08 4. "MLD,MLD request Wake-on-LAN packet" "Not requested,Requested"
bitfld.long 0x08 3. "NDNS,ND/NS request Wake-on-LAN packet" "Not requested,Requested"
newline
bitfld.long 0x08 2. "ARP,ARP request Wake-on-LAN packet" "Not requested,Requested"
bitfld.long 0x08 1. "TS,TCP SYN Wake-on-LAN message" "Not requested,Requested"
newline
bitfld.long 0x08 0. "MP,Magic Wake-on-LAN packet" "Not requested,Requested"
group.long 0x1520++0x03
line.long 0x00 "PIPV4MR,Port IPv4 Mode Register"
bitfld.long 0x00 31. "ATDE,ARP target protocol IP address detect enable" "Disabled,Enabled"
group.long 0x1528++0x03
line.long 0x00 "PIPV4AR,Port IPv4 Address Register"
rgroup.long 0x1604++0x03
line.long 0x00 "PSIMAFCAPR,Port Station Interface MAC Address Filtering Capability Register"
bitfld.long 0x00 12. "MODE,Mode" "0,1"
hexmask.long.word 0x00 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port"
group.long 0x1614++0x03
line.long 0x00 "PSI0VMAFCFGR,Port Station Interface 0 VSI MAC Address Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_MAC_AFTE,Number of SI MAC address filter table entries assigned to the SI"
rgroup.long 0x1680++0x07
line.long 0x00 "PUFDMFR,Port Unicast Frames Dropped Due To MAC Filtering Register"
line.long 0x04 "PMFDMFR,Port Multicast Frames Dropped Due To MAC Filtering Register"
group.long 0x1700++0x03
line.long 0x00 "PSIVLANFMR,Port Station Interface VLAN Filtering Mode Register"
bitfld.long 0x00 0. "VS,VLAN tag select" "Inner,Outer"
rgroup.long 0x1704++0x03
line.long 0x00 "PSIVLANFCAPR,Port Station Interface VLAN Filtering Capability Register"
bitfld.long 0x00 12. "MODE,Mode" "0,1"
hexmask.long.word 0x00 0.--11. 1. "NUM_MAC_AFTE,Number of SI MAC address filter rules per port"
group.long 0x1714++0x03
line.long 0x00 "PSI0VLANFCFGR,Port Station Interface 0 VLAN Filtering Configuration Register"
hexmask.long.byte 0x00 0.--7. 1. "NUM_VLAN_FTE,Number of VLAN filter table entries assigned to the SI"
rgroup.long 0x1780++0x0B
line.long 0x00 "PUFDVFR,Port Unicast Frames Dropped VLAN Filtering Register"
line.long 0x04 "PMFDVFR,Port Multicast Frames Dropped VLAN Filtering Register"
line.long 0x08 "PBFDVFR,Port Broadcast Frames Dropped VLAN Filtering Register"
group.long 0x1800++0x03
line.long 0x00 "PRFSMR,Port RFS Mode Register"
bitfld.long 0x00 31. "RFSE,RFS enable" "Disabled,Enabled"
rgroup.long 0x1804++0x03
line.long 0x00 "PRFSCAPR,Port RFS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RFS,Number of receive flow steering (RFS) entries per port" "16,32,48,64,80,96,112,128,144,160,176,192,208,224,240,256"
group.long 0x1814++0x03
line.long 0x00 "PSI0RFSCFGR,Port Station Interface 0 RFS Configuration Register"
hexmask.long.word 0x00 0.--8. 1. "NUM_RFS,Number of receive flow steering (RFS) entries assigned to the SI"
group.long 0x1A00++0x03
line.long 0x00 "PTGCR,Port Time Gating Control Register"
bitfld.long 0x00 31. "TGE,Time gating enable" "Disabled,Enabled"
bitfld.long 0x00 30. "TGPE,Time gate fusing disable" "No,Yes"
newline
bitfld.long 0x00 29. "TG_DROP_DISABLE,Time gate drop disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "HOLD_ADVANCE,Hold-advance value"
rgroup.long 0x1A08++0x03
line.long 0x00 "PTGCAPR,Port Time Gating Capability Register"
hexmask.long.word 0x00 0.--15. 1. "MAX_GCL_LEN,Max time gating (Qbv) gate control list length"
rgroup.long 0x1A10++0x13
line.long 0x00 "PTGAGLSR,Port Time Gating Admin Gate List Status Register"
bitfld.long 0x00 1. "CFG_PEND,New configuration processed" "Completed,Pending"
bitfld.long 0x00 0. "TG,Time gated" "Not active,Active"
line.long 0x04 "PTGAGLLR,Port Time Gating Admin Gate List Length Register"
hexmask.long.word 0x04 0.--15. 1. "ADMIN_GATE_LIST_LENGTH,Administrative gate list length"
line.long 0x08 "PTGOGLSR,Port Time Gating Operational Gate List Status Register"
hexmask.long.word 0x08 0.--15. 1. "CURR_POS,Current position in the operational gate list table"
line.long 0x0C "PTGOGLLR,Port Time Gating Operational Gate List Length Register"
hexmask.long.word 0x0C 0.--15. 1. "OPER_GATE_LIST_LENGTH,Operation gate list length"
line.long 0x10 "PTGLDFCR,Port Time Gating Late Discarded Frame Count Register"
group.long 0x1A24++0x03
line.long 0x00 "PESMATOR,Port Egress Selection Manager Advance Time Offset Register"
hexmask.long.word 0x00 0.--15. 0x01 "ADV_TIME_OFFSET,Advance time offset"
repeat 8. (increment 0x1A44 0x10)(increment 0. 1.)
rgroup.long $1++0x0B
line.long 0x00 "PTC$2TGSR,Port Traffic Class $2 Time Gating Status Register"
bitfld.long 0x00 0. "CURR_STATE,Current gate state" "Closed,Open"
line.long 0x04 "PTC$2TGTOCR0,Port Traffic Class $2 Time Gating Transmission Overrun Counter Register 0"
line.long 0x08 "PTC$2TGTOCR1,Port Traffic Class $2 Time Gating Transmission Overrun Counter"
repeat.end
group.long 0x1B00++0x03
line.long 0x00 "PPSFPMR,Port Per-Stream Filtering And Policing Mode Register"
bitfld.long 0x00 3. "PVZC,Port VLAN zero control" "Ignored,Accepted"
bitfld.long 0x00 2. "PVC,Port VLAN control" "Ignored (untagged),Accepted"
newline
bitfld.long 0x00 1. "VS,Per-stream filtering and policing (PSFP) VLAN selection" "Inner,Outer"
bitfld.long 0x00 0. "PSFPE,Per-stream filtering and policing (PSFP) enable" "Disabled,Enabled"
rgroup.long 0x1B08++0x03
line.long 0x00 "PSIDCAPR,Port Stream Identity Capability Register"
hexmask.long.word 0x00 0.--15. 1. "SIDIT_ENTRIES,Maximum number of stream identity instance table entries"
rgroup.long 0x1B18++0x03
line.long 0x00 "PSFCAPR,Port Stream Filter Capability Register"
hexmask.long.word 0x00 0.--15. 1. "SFIT_ENTRIES,Maximum number of stream filter instance table entries"
rgroup.long 0x1B28++0x03
line.long 0x00 "PSGCAPR,Port Stream Gating Capability Register"
bitfld.long 0x00 16.--18. "GC_LEN,Stream gate control list size (Qci)" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--15. 1. "SGIT_ENTRIES,Maximum number of stream gate instance table entries"
group.long 0x1B30++0x03
line.long 0x00 "PFMCR,Port Flow Meter Control Register"
hexmask.long.byte 0x00 0.--7. 1. "OAL,Overhead accounting length"
rgroup.long 0x1B38++0x03
line.long 0x00 "PFMCAPR,Port Flow Meter Capability Register"
hexmask.long.word 0x00 0.--15. 1. "NUM_FM_INST,Number of flow meters instances in the flow meter instance table"
group.long 0x1D00++0x0F
line.long 0x00 "PSI0UMHFR0,Port Station Interface 0 Unicast MAC Hash Filter Register 0"
line.long 0x04 "PSI0UMHFR1,Port Station Interface 0 Unicast MAC Hash Filter Register 1"
line.long 0x08 "PSI0MMHFR0,Port Station Interface 0 Multicast MAC Hash Filter Register 0"
line.long 0x0C "PSI0MMHFR1,Port Station Interface 0 Multicast MAC Hash Filter Register 1"
group.long 0x1E00++0x07
line.long 0x00 "PSI0VHFR0,Port Station Interface 0 VLAN Hash Filter Register 0"
line.long 0x04 "PSI0VHFR1,Port Station Interface 0 VLAN Hash Filter Register 1"
repeat 8. (increment 0x2020 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PTC$2MSDUR,Port Traffic Class $2 Maximum SDU Register"
hexmask.long.word 0x00 0.--15. 1. "MAXSDU,Maximum SDU"
repeat.end
group.long 0x3000++0x03
line.long 0x00 "PAR_VXLAN_DP,VXLAN DP Configuration"
hexmask.long.word 0x00 16.--31. 1. "VXLAN_DP_1,Configured VXLAN DP 1"
hexmask.long.word 0x00 0.--15. 1. "VXLAN_DP_2,Configured VXLAN DP 2"
group.long 0x3024++0x03
line.long 0x00 "PAR_UDP_IPSEC,UDP IPsec"
bitfld.long 0x00 29. "SPPR,Short packet padding removal from checksum calculation" "Not removed,Removed"
repeat 4. (increment 0x303C 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PAR_CUSTETYPE$2,CustEtype $2"
hexmask.long.word 0x00 16.--31. 1. "ETYPE,ETYPE"
bitfld.long 0x00 5. "EN,Detection and mapping enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--3. "CP,Non IP code point" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x3050++0x03
line.long 0x00 "PAR_PORT_CFG,Port Configuration"
bitfld.long 0x00 1. "L3CD,Layer 3 checksum disable" "No,Yes"
bitfld.long 0x00 0. "L4CD,Layer 4 checksum disable" "No,Yes"
group.long 0x8008++0x03
line.long 0x00 "PM0_COMMAND_CONFIG,Port MAC 0 Command And Configuration Register"
bitfld.long 0x00 31. "MG,Magic packet detection enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RXSTP,Rx stop" "Not stopped,Stopped"
newline
bitfld.long 0x00 24. "REG_LOWP_RXETY,Rx low power indication assert" "Low Power Idle,FIFO empty"
bitfld.long 0x00 23. "TX_LOWP_ENA,Transmit low power idle enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "SFD,SFD character check disable at frame start" "No,Yes"
bitfld.long 0x00 17. "NO_LEN_CHK,Payload length check disable" "No,Yes"
newline
bitfld.long 0x00 16. "SEND_IDLE,Frame transmissions suppress and force IDLE" "Not sent,Sent"
bitfld.long 0x00 13. "CNT_FRM_EN,Control frame reception enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "SWR,Software reset" "No reset,Reset"
bitfld.long 0x00 11. "TXP,Padding of frames in transmit direction enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "XGLP,XGMII/GMII loopback enable" "Disabled,Enabled"
bitfld.long 0x00 9. "TX_ADDR_INS,Transmit source MAC address insertion" "Transmit,Overwrite"
newline
bitfld.long 0x00 8. "PAUSE_IGN,Ignore pause frame quanta" "Not ignored,Ignored"
bitfld.long 0x00 7. "PAUSE_FWD,Terminate/forward received pause frames" "Terminated,Forwarded"
newline
bitfld.long 0x00 6. "CRC,Terminate/forward CRC of received frames" "Terminated,Forwarded"
bitfld.long 0x00 5. "PAD,Frame padding removal in receive path enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "PROMIS,Promiscuous operation enable" "Disabled,Enabled"
bitfld.long 0x00 3. "WAN,WAN mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "RX_EN,MAC receive path enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_EN,MAC transmit path enable" "Disabled,Enabled"
group.long 0x8014++0x03
line.long 0x00 "PM0_MAXFRM,Port MAC 0 Maximum Frame Length Register"
hexmask.long.word 0x00 16.--31. 1. "TX_MTU,Maximum length on transmit"
hexmask.long.word 0x00 0.--15. 1. "MAXFRM,Maximum supported received frame length"
group.long 0x801C++0x03
line.long 0x00 "PM0_RX_FIFO_SECTIONS,Port MAC a Receive FIFO Threshold Configuration Register"
bitfld.long 0x00 16.--20. "RX_SECTION_AVAIL,Receive FIFO available" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x8040++0x07
line.long 0x00 "PM0_IEVENT,Port MAC 0 Interrupt Event Register"
eventfld.long 0x00 31. "LT,XGMII - link training event" "Not received,Received"
eventfld.long 0x00 30. "AN,XGMII - auto negotiation event" "Not occurred,Occurred"
newline
eventfld.long 0x00 29. "PCS,XGMII - PCS event" "Not occurred,Occurred"
eventfld.long 0x00 14. "MGI,Magic packet detection indication event" "Not detected,Detected"
newline
eventfld.long 0x00 12. "RX_OVFL,Receive FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 11. "TX_UNFL,Transmit FIFO underflow event" "Not underflowed,Underflowed"
newline
eventfld.long 0x00 10. "TX_OVFL,Transmit FIFO overflow event" "Not overflowed,Overflowed"
eventfld.long 0x00 7. "LI_FAULT,Link interruption fault event (XGMII)" "Not occurred,Occurred"
newline
rbitfld.long 0x00 6. "RX_EMPTY,Receive FIFO empty event" "Not occurred,Occurred"
rbitfld.long 0x00 5. "TX_EMPTY,Transmit FIFO empty event" "Not occurred,Occurred"
newline
rbitfld.long 0x00 4. "RX_LOWP,Low power idle event" "Not occurred,Occurred"
eventfld.long 0x00 2. "PHY_LOS,Phy loss of signal event" "Not occurred,Occurred"
newline
eventfld.long 0x00 1. "REM_FAULT,Remote fault event (XGMII)" "Not occurred,Occurred"
eventfld.long 0x00 0. "LOC_FAULT,Local fault event (XGMII)" "Not occurred,Occurred"
line.long 0x04 "PM0_TX_IPG_LENGTH,Port MAC 0 Transmit Inter-Packet Gap Length Register"
hexmask.long.byte 0x04 0.--6. 1. "IPG_LEN,Transmit inter-packet gap value"
group.long (0x8040+0x0C)++0x03
line.long 0x00 "PM0_IMASK,Port MAC 0 Interrupt Mask Register"
bitfld.long 0x00 30. "MGI,Magic packet detection indication normal interrupt mask" "Masked,Enabled"
bitfld.long 0x00 15. "PCS,XGMII - PCS event interrupt mask" "Masked,Enabled"
newline
bitfld.long 0x00 14. "AN,XGMII - auto negotiation event interrupt mask" "Masked,Enabled"
bitfld.long 0x00 13. "LT,XGMII - link training event interrupt mask" "Masked,Enabled"
group.long (0x8040+0x14)++0x03
line.long 0x00 "PM0_PAUSE_QUANTA,Port MAC 0 Pause Quanta Register"
hexmask.long.word 0x00 0.--15. 1. "PQNT,Quanta value used when XOFF is triggered"
group.long (0x8040+0x24)++0x03
line.long 0x00 "PM0_PAUSE_THRESH,Port MAC 0 Pause Quanta Threshold Register"
hexmask.long.word 0x00 0.--15. 1. "QTH,Refresh pause frame sending value"
group.long (0x8040+0x34)++0x03
line.long 0x00 "PM0_RX_PAUSE_STATUS,Port MAC 0 Receive Pause Status Register"
rbitfld.long 0x00 0. "PSTAT,Pause status" "Not paused,Paused"
group.long (0x8040+0x78)++0x0F
line.long 0x00 "PM0_LPWAKE_TIMER,Port MAC 0 EEE Low Power Wakeup Timer Register"
hexmask.long.tbyte 0x00 0.--23. 1. "TW_SYS_TX,Enet_clk cycles number required by PHY"
line.long 0x04 "PM0_SLEEP_TIMER,Port MAC 0 Transmit EEE Low Power Timer Register"
hexmask.long.tbyte 0x04 0.--23. 1. "SLEEPT,Enet_clk cycles number where Tx is idle"
line.long 0x08 "PM0_SINGLE_STEP,Port MAC 0 IEEE1588 Single-Step Control Register"
bitfld.long 0x08 31. "EN,IEEE-1588 single-step enable" "Disabled,Enabled"
hexmask.long.byte 0x08 8.--15. 0x01 "OFFSET,Start offset from the beginning of a frame"
newline
bitfld.long 0x08 7. "CH,Checksum update" "Not required,Required"
line.long 0x0C "PM0_PEER_DELAY,Port MAC 0 IEEE1588 Single-Step Peer Delay Register"
hexmask.long 0x0C 0.--29. 1. "PEERDELAY,Value added to the correction field in addition to the transient time update"
group.long (0x8040+0xA0)++0x03
line.long 0x00 "PM0_STATN_CONFIG,Port MAC 0 Statistics Configuration Register"
eventfld.long 0x00 2. "CLR,Reset all counters" "No reset,Reset"
bitfld.long 0x00 1. "COD,Counter reset by read" "No reset,Reset"
newline
bitfld.long 0x00 0. "SAT,Saturate counters" "No,Yes"
rgroup.quad 0x8100++0xCF
line.quad 0x00 "PM0_REOCTN,Port MAC 0 Receive Ethernet Octets Counter Register"
line.quad 0x08 "PM0_ROCTN,Port MAC 0 Receive Octets Counter Register"
line.quad 0x10 "PM0_RALNN,Port MAC 0 Receive Alignment Error Counter Register"
line.quad 0x18 "PM0_RXPFN,Port MAC 0 Receive Valid Pause Frame Counter Register"
line.quad 0x20 "PM0_RFRMN,Port MAC 0 Receive Frame Counter Register"
line.quad 0x28 "PM0_RFCSN,Port MAC 0 Receive Frame Check Sequence Error Counter Register"
line.quad 0x30 "PM0_RVLANN,Port MAC 0 Receive VLAN Frame Counter Register"
line.quad 0x38 "PM0_RERRN,Port MAC 0 Receive Frame Error Counter Register"
line.quad 0x40 "PM0_RUCAN,Port MAC 0 Receive Unicast Frame Counter Register"
line.quad 0x48 "PM0_RMCAN,Port MAC 0 Receive Multicast Frame Counter Register"
line.quad 0x50 "PM0_RBCAN,Port MAC 0 Receive Broadcast Frame Counter Register"
line.quad 0x58 "PM0_RDRPN,Port MAC 0 Receive Dropped Packets Counter Register"
line.quad 0x60 "PM0_RPKTN,Port MAC 0 Receive Packets Counter Register"
line.quad 0x68 "PM0_RUNDN,Port MAC 0 Receive Undersized Packet Counter Register"
line.quad 0x70 "PM0_R64N,Port MAC 0 Receive 64-Octet Packet Counter Register"
line.quad 0x78 "PM0_R127N,Port MAC 0 Receive 65 to 127-Octet Packet Counter Register"
line.quad 0x80 "PM0_R255N,Port MAC 0 Receive 128 To 255-Octet Packet Counter Register"
line.quad 0x88 "PM0_R511N,Port MAC 0 Receive 256 To 511-Octet Packet Counter Register"
line.quad 0x90 "PM0_R1023N,Port MAC 0 Receive 512 To 1023-Octet Packet Counter Register"
line.quad 0x98 "PM0_R1522N,Port MAC 0 Receive 1024 To 1522-Octet Packet Counter Register"
line.quad 0xA0 "PM0_R1523XN,Port MAC 0 Receive 1523 To Max-Octet Packet Counter Register"
line.quad 0xA8 "PM0_ROVRN,Port MAC 0 Receive Oversized Packet Counter Register"
line.quad 0xB0 "PM0_RJBRN,Port MAC 0 Receive Jabber Packet Counter Register"
line.quad 0xB8 "PM0_RFRGN,Port MAC 0 Receive Fragment Packet Counter Register"
line.quad 0xC0 "PM0_RCNPN,Port MAC 0 Receive Control Packet Counter Register"
line.quad 0xC8 "PM0_RDRNTPN,Port MAC 0 Receive Dropped Not Truncated Packets Counter Register"
rgroup.quad (0x8100+0x100)++0x0F
line.quad 0x00 "PM0_TEOCTN,Port MAC 0 Transmit Ethernet Octets Counter Register"
line.quad 0x08 "PM0_TOCTN,Port MAC 0 Transmit Octets Counter Register"
rgroup.quad (0x8100+0x118)++0x3F
line.quad 0x00 "PM0_TXPFN,Port MAC 0 Transmit Valid Pause Frame Counter Register"
line.quad 0x08 "PM0_TFRMN,Port MAC 0 Transmit Frame Counter Register"
line.quad 0x10 "PM0_TFCSN,Port MAC 0 Transmit Frame Check Sequence Error Counter"
line.quad 0x18 "PM0_TVLANN,Port MAC 0 Transmit VLAN Frame Counter Register"
line.quad 0x20 "PM0_TERRN,Port MAC 0 Transmit Frame Error Counter Register"
line.quad 0x28 "PM0_TUCAN,Port MAC 0 Transmit Unicast Frame Counter Register"
line.quad 0x30 "PM0_TMCAN,Port MAC 0 Transmit Multicast Frame Counter Register"
line.quad 0x38 "PM0_TBCAN,Port MAC 0 Transmit Broadcast Frame Counter Register"
rgroup.quad (0x8100+0x160)++0x47
line.quad 0x00 "PM0_TPKTN,Port MAC 0 Transmit Packets Counter Register"
line.quad 0x08 "PM0_TUNDN,Port MAC 0 Transmit Undersized Packet Counter Register"
line.quad 0x10 "PM0_T64N,Port MAC 0 Transmit 64-Octet Packet Counter Register"
line.quad 0x18 "PM0_T127N,Port MAC 0 Transmit 65 To 127-Octet Packet Counter Register"
line.quad 0x20 "PM0_T255N,Port MAC 0 Transmit 128 To 255-Octet Packet Counter Register"
line.quad 0x28 "PM0_T511N,Port MAC 0 Transmit 256 To 511-Octet Packet Counter Register"
line.quad 0x30 "PM0_T1023N,Port MAC 0 Transmit 512 To 1023-Octet Packet Counter Register"
line.quad 0x38 "PM0_T1522N,Port MAC 0 Transmit 1024 To 1522-Octet Packet Counter Register"
line.quad 0x40 "PM0_T1523N,Port MAC 0 Transmit 1523 To TX_MTU-Octet Packet Counter Register"
rgroup.quad (0x8100+0x1C0)++0x07
line.quad 0x00 "PM0_TCNPN,Port MAC 0 Transmit Control Packet Counter Register"
if (((per.l(ad:0x1F8060000+0x8300))&0x8000)==0x00)
group.long 0x8300++0x03
line.long 0x00 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 13.--14. "SSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "SFD,Full duplex RGMII mode force" ",Forced"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
else
group.long 0x8300++0x03
line.long 0x00 "PM0_IF_MODE,Port MAC 0 Interface Mode Control Register"
bitfld.long 0x00 15. "ENA,Automatic speed selection enable" "Disabled,Enabled"
bitfld.long 0x00 11. "INV,Inverted operation" "Normal,Inverted"
newline
bitfld.long 0x00 5. "RLP,RGMII internal loopback operation" "Normal,Loopback"
bitfld.long 0x00 2. "RG,RGMII mode" "Not activated,Activated"
newline
bitfld.long 0x00 0.--1. "IFMODE,Mode" "XGMII,,GMII,?..."
endif
rgroup.long 0x8304++0x03
line.long 0x00 "PM0_IF_STATUS,Port MAC 0 Interface Status Register"
bitfld.long 0x00 15. "RGLINK,Valid link established" "No,Yes"
bitfld.long 0x00 13.--14. "RGSP,RGMII speed [Mbps]" "100,10,1000,?..."
newline
bitfld.long 0x00 12. "RGFD,RGMII full duplex link established" "No link/Half-duplex,Full-duplex"
tree.end
tree.end
tree "Port Station Interface Registers"
tree "ENETC_P0_SI0"
base ad:0x1F8000000
group.long 0x00++0x03
line.long 0x00 "SIMR,Station Interface Mode Register"
bitfld.long 0x00 31. "EN,Enable station interface" "Disabled,Enabled"
bitfld.long 0x00 16. "DEFAULT_RX_GROUP,Default receive group" "0,1"
bitfld.long 0x00 4. "V2IPVE,VLAN to IPV mapping enable" "Disabled,Enabled"
bitfld.long 0x00 3. "RNBM,Receive no broad-cast mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "RNMM,Receive no multi-cast mode" "Disabled,Enabled"
bitfld.long 0x00 1. "RNUM,Receive no unicast-cast mode" "Disabled,Enabled"
bitfld.long 0x00 0. "RSEE,RSS classification enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "SISR,Station Interface Status Register"
bitfld.long 0x00 4. "VLAN_UTA,SI VLAN untagged frames accepted" "Not accepted,Accepted"
bitfld.long 0x00 3. "VLAN_P,SI VLAN promiscuous" "0,1"
bitfld.long 0x00 2. "MAC_MP,SI MAC multicast promiscuous" "0,1"
bitfld.long 0x00 1. "MAC_UP,SI MAC unicast promiscuous" "0,1"
newline
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
repeat 2. (increment 0x18 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SICTR$2,Station Interface Current Time Register $2"
repeat.end
rgroup.long 0x20++0x07
line.long 0x00 "SIPCAPR0,Station Interface Port Capability Register 0"
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating" "Not supported,Supported"
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload support" "Not supported,Supported"
line.long 0x04 "SIPCAPR1,Station Interface Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1k,2k,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multicast hash entries per SI" "64,128,256,512"
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1,2,3,4,5,6,7,8"
rgroup.long 0x30++0x03
line.long 0x00 "SITGTGR,Station Interface Time Gating Tick Granularity Register"
group.long 0x38++0x03
line.long 0x00 "SIRBGCR,Station Interface Receive BDR Group Control Register"
bitfld.long 0x00 16.--18. "RINGS_PER_GROUP,Number of rings per group" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 0.--1. "NUM_GROUPS,Number of groups used" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SICAR0,Station Interface Cache Attribute Register 0"
bitfld.long 0x00 30. "RDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "RDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "RDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "BD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "BD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "WRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "WRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "BD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "BD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x44++0x03
line.long 0x00 "SICAR1,Station Interface Cache Attribute Register 1"
bitfld.long 0x00 22. "MSG_RDSNP,SI messaging read data snoop" "0,1"
bitfld.long 0x00 20.--21. "MSG_RDDOMAIN,SI messaging read data domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "MSG_RDCACHE,SI messaging read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "MSG_WRSNP,SI messaging write snoop" "0,1"
newline
bitfld.long 0x00 4.--5. "MSG_WRDOMAIN,SI messaging write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "MSG_WRCACHE,SI messaging write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x48++0x03
line.long 0x00 "SICAR2,Station Interface Cache Attribute Register 2"
bitfld.long 0x00 30. "CRDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "CRDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "CRDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "CBD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "CBD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "CBD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "CWRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "CWRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "CBD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "CBD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "CBD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x80++0x07
line.long 0x00 "SIPMAR0,Station Interface Primary MAC Address Register 0"
line.long 0x04 "SIPMAR1,Station Interface Primary MAC Address Register 1"
hexmask.long.word 0x04 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
repeat 2. (increment 0x90 0x04)(increment 1 1)
rgroup.long $1++0x03
line.long 0x00 "SICVLANR$2,Station Interface Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x100++0x07
line.long 0x00 "SIVLANIPVMR0,Station Interface VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
line.long 0x04 "SIVLANIPVMR1,Station Interface VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
group.long 0x150++0x03
line.long 0x00 "SIIPVBDRMR,Station Interface IPV To Ring Mapping Register"
bitfld.long 0x00 28.--30. "IPV7BDR,BD ring used within the group for IPV 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6BDR,BD ring used within the group for IPV 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "IPV5BDR,BD ring used within the group for IPV 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4BDR,BD ring used within the group for IPV 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3BDR,BD ring used within the group for IPV 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2BDR,BD ring used within the group for IPV 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "IPV1BDR,BD ring used within the group for IPV 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0BDR,BD ring used within the group for IPV 0" "0,1,2,3,4,5,6,7"
group.long 0x204++0x07
line.long 0x00 "PSIMSGRR,Physical Station Interface Message Receive Register"
hexmask.long.word 0x00 16.--31. 1. "MC,Message code"
eventfld.long 0x00 2. "MR2,Message received from VSI 2" "Not received,Received"
eventfld.long 0x00 1. "MR1,Message received from VSI 1" "Not received,Received"
line.long 0x04 "PSIMSGSR,Physical Station Interface Message Send Register"
hexmask.long.word 0x04 16.--31. 1. "MC,Message code"
eventfld.long 0x04 2. "MR2,Message received from VSI 2" "Not received,Received"
eventfld.long 0x04 1. "MR1,Message received from VSI 1" "Not received,Received"
repeat 2. (increment 0x210 0x08)(increment 1 1)
group.long $1++0x07
line.long 0x00 "PSIV$2MSGRCVAR0,PSI VSI $2 Message Receive Address Register 0"
hexmask.long 0x00 6.--31. 0x40 "ADDRL,Message address low"
rbitfld.long 0x00 0.--4. "MSIZE,Message size" "1024B,32B,64B,96B,128B,160B,192B,224B,256B,288B,320B,352B,384B,416B,448B,480B,512B,544B,576B,608B,640B,672B,704B,736B,768B,800B,832B,864B,896B,928B,960B,992B"
line.long 0x04 "PSIV$2MSGRCVAR1,PSI VSI $2 Message Receive Address Register 1"
repeat.end
repeat 2. (increment 0x300 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIROCT$2,Station Interface Receive Octets Counter $2"
repeat.end
repeat 2. (increment 0x308 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRFRM$2,Station Interface Receive Frame Counter $2"
repeat.end
repeat 2. (increment 0x310 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRUCA$2,Station Interface Receive Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x318 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRMCA$2,Station Interface Receive Multicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x320 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITOCT$2,Station Interface Transmit Octets Counter $2"
repeat.end
repeat 2. (increment 0x328 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITFRM$2,Station Interface Transmit Frame Counter $2"
repeat.end
repeat 2. (increment 0x330 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITUCA$2,Station Interface Transmit Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x338 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITMCA$2,Station Interface Transmit Multicast Frame Counter $2"
repeat.end
group.long 0x800++0x03
line.long 0x00 "SICBDRMR,Station Interface Control BDR Mode Register"
bitfld.long 0x00 31. "EN,Enable control buffer descriptor ring" "Disabled,Enabled"
rgroup.long 0x804++0x03
line.long 0x00 "SICBDRSR,Station Interface Control BDR Status Register"
bitfld.long 0x00 0. "BUSY,Busy" "Idle,Busy"
group.long 0x810++0x13
line.long 0x00 "SICBDRBAR0,Station Interface Control BDR Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits"
line.long 0x04 "SICBDRBAR1,Station Interface Control BDR Base Address Register 1"
line.long 0x08 "SICBDRPIR,Station Interface Control BDR Producer Index Register"
hexmask.long.word 0x08 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring producer index"
line.long 0x0C "SICBDRCIR,Station Interface Control BDR Consumer Index Register"
hexmask.long.word 0x0C 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring consumer index"
line.long 0x10 "SICBDRLENR,Station Interface Control BDR Length Register"
hexmask.long.word 0x10 3.--10. 0x08 "LENGTH,BD ring length"
group.long 0x8A4++0x03
line.long 0x00 "SICBDREDR,Station Interface Control BDR Event Detect Register"
eventfld.long 0x00 0. "CBDC,Control BD completed" "Not completed,Completed"
rgroup.long 0x900++0x0B
line.long 0x00 "SICAPR0,Station Interface Capability Register 0"
bitfld.long 0x00 28.--29. "NUM_MAC_ADR,Number of MAC address" "1,2,3,4"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
line.long 0x04 "SICAPR1,Station Interface Capability Register 1"
hexmask.long.byte 0x04 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI"
line.long 0x08 "SICAPR2,Station Interface Capability Register 2"
bitfld.long 0x08 3. "VTP[3],VLAN types permitted bit 3 [Standard C-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 2. "VTP[2],VLAN types permitted bit 2 [Standard S-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 1. "VTP[1],VLAN types permitted bit 1 [VLAN defined by PCVLANR1]" "Not permitted,Permitted"
bitfld.long 0x08 0. "VTP[0],VLAN types permitted bit 0 [VLAN defined by PCVLANR2]" "Not permitted,Permitted"
group.long 0xA00++0x03
line.long 0x00 "PSIIER,Physical Station Interface Interrupt Enable Register"
bitfld.long 0x00 18. "FLR2IE,Function 2 level reset interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 17. "FLR1IE,Function 1 level reset interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "MR2IE,Message 2 receive interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "MR1IE,Message 1 receive interrupt enable" "Disabled,Enabled"
group.long 0xA08++0x03
line.long 0x00 "PSIIDR,Physical Station Interface Interrupt Detect Register"
eventfld.long 0x00 18. "FLR2,Function 2 level reset" "No reset,Reset"
eventfld.long 0x00 17. "FLR1,Function 1 level reset" "No reset,Reset"
rbitfld.long 0x00 16. "RXR,Summary of detected interrupt for all receive rings belonging to the SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "MR2,Message 2 received from VSI 2" "Not received,Received"
newline
eventfld.long 0x00 1. "MR1,Message 1 received from VSI 1" "Not received,Received"
rbitfld.long 0x00 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI" "No interrupt,Interrupt"
group.long 0xA18++0x03
line.long 0x00 "SITXIDR,Station Interface Transmit Interrupt Detect Register"
eventfld.long 0x00 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "TXT9,Summary of detected threshold frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "TXT8,Summary of detected threshold frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "TXT7,Summary of detected threshold frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "TXT6,Summary of detected threshold frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "TXT5,Summary of detected threshold frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "TXT4,Summary of detected threshold frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "TXT3,Summary of detected threshold frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "TXT2,Summary of detected threshold frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "TXT1,Summary of detected threshold frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "TXT0,Summary of detected threshold frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA28++0x03
line.long 0x00 "SIRXIDR,Station Interface Receive Interrupt Detect Register"
eventfld.long 0x00 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA30++0x03
line.long 0x00 "SIMSIVR,Station Interface MSI-X Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat 16. (increment 0xB00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSITR$2VR,Station Interface MSI-X Transmit Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 16. (increment 0xB80 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSIRR$2VR,Station Interface MSI-X Receive Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
group.long 0xE20++0x07
line.long 0x00 "SIUEDR,Station Interface Uncorrectable Error Detect Register"
eventfld.long 0x00 19. "DROP_RING_SEL,Non-existing receive ring counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 18. "DROP_GRP_SEL,Non-existing receive group counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 17. "DROP_RING_EN,Station interface ring disabled drop counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 16. "DROP_SI_EN,Station interface disabled drop counted in SIUEFDCR" "No effect,Cleared"
newline
eventfld.long 0x00 0. "PE,Programming error" "No effect,Cleared"
line.long 0x04 "SIUERER,Station Interface Uncorrectable Error Report Enable Register"
bitfld.long 0x04 0. "PERE,Programming error report enable" "Disabled,Enabled"
rgroup.long 0xE28++0x03
line.long 0x00 "SIUEFDCR,Station Interface Uncorrectable Error Frame Drop Count Register"
rgroup.long 0xE30++0x03
line.long 0x00 "SIUMEDR,Station Interface Uncorrectable Memory Error Detect Register"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
bitfld.long 0x00 30. "M,Multiple" "Low,High"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE38++0x03
line.long 0x00 "SIUSBEDR,Station Interface Uncorrectable System Bus Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Not valid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "Low,High"
bitfld.long 0x00 29. "RD,Report disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
rgroup.long 0x1000++0x03
line.long 0x00 "SIMAFTCAPR,Station Interface MAC Address Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI"
rgroup.long 0x1100++0x03
line.long 0x00 "SIVFTCAPR,Station Interface VLAN Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI"
rgroup.long 0x1200++0x03
line.long 0x00 "SIRFSCAPR,Station Interface RFS Capability Register"
hexmask.long.word 0x00 0.--8. 0x01 "NUM_RFS,Number of receive flow steering entries available for use"
rgroup.long 0x1600++0x03
line.long 0x00 "SIRSSCAPR,Station Interface RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 16. (increment 0x00 0x200)(increment 0 1)
tree "BDR $2"
group.long ($1+0x8000)++0x07
line.long 0x00 "TB$2MR,Tx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable transmit buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 9. "VIH,VLAN insert hint" "Not inserted,Inserted"
bitfld.long 0x00 8. "CRC,User CRC provided" "Not provided,Provided"
bitfld.long 0x00 4.--6. "WRR,WRR weight" "1,2,3,4,5,6,7,8"
newline
bitfld.long 0x00 0.--2. "PRIO,Priority" "Lowest,1,2,3,4,5,6,Highest"
line.long 0x04 "TB$2SR,Tx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "BUSY,Transmit ring is busy" "Idle,Busy"
group.long ($1+0x8010)++0x13
line.long 0x00 "TB$2BAR0,Tx BDR $2 Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x04 "TB$2BAR1,Tx BDR $2 Base Address Register 1"
line.long 0x08 "TB$2PIR,Tx BDR $2 Producer Index Register"
hexmask.long.word 0x08 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
line.long 0x0C "TB$2CIR,Tx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 16.--31. 0x01 "STAT_ID,Status identifier"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring consumer index"
line.long 0x10 "TB$2LENR,Tx BDR $2 Length Register"
hexmask.long.tbyte 0x10 3.--16. 0x08 "LENGTH,BD ring length"
group.long ($1+0x80A0)++0x03
line.long 0x00 "TB$2IER,Tx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 1. "TXFIE,Transmit frame interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TXTIE,Transmit threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x80A4)++0x03
line.long 0x00 "TB$2IDR,Tx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 1. "TXF,Transmit of frame" "No transmit,Transmit"
bitfld.long 0x00 0. "TXT,Transmit threshold" "No threshold,Threshold"
group.long ($1+0x80A8)++0x07
line.long 0x00 "TB$2ICR0,Tx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "ICPT,Interrupt coalescing packet threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384"
line.long 0x04 "TB$2ICR1,Tx BDR $2 Interrupt Coalescing Register 1"
group.long ($1+0x8100)++0x1B
line.long 0x00 "RB$2MR,Rx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable receive buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 6. "VTPD,VLAN tag presentation disable" "No,Yes"
bitfld.long 0x00 5. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CM,Congestion mode" "Lossy,Lossless"
newline
bitfld.long 0x00 2. "BDS,BD size" "16B,32B"
bitfld.long 0x00 0. "AL,Header alignment" "Not added,Added"
line.long 0x04 "RB$2SR,Rx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "EMPTY,Ring is empty" "Not empty,Empty"
line.long 0x08 "RB$2BSR,Rx BDR $2 Buffer Size Register"
hexmask.long.word 0x08 0.--15. 0x01 "BSIZE,Buffer size"
line.long 0x0C "RB$2CIR,Rx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,receive buffer descriptor ring consumer index"
line.long 0x10 "RB$2BAR0,Rx BDR $2 Base Address Register 0"
hexmask.long 0x10 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x14 "RB$2BAR1,Rx BDR $2 Base Address Register 1"
line.long 0x18 "RB$2PIR,Rx BDR $2 Producer Index Register"
hexmask.long.word 0x18 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
group.long ($1+0x8120)++0x03
line.long 0x00 "RB$2LENR,Rx BDR $2 Length Register"
hexmask.long.tbyte 0x00 3.--16. 0x08 "LENGTH,BD ring length"
rgroup.long ($1+0x8180)++0x03
line.long 0x00 "RB$2DCR,Rx BDR $2 Drop Count Register"
group.long ($1+0x81A0)++0x03
line.long 0x00 "RB$2IER,Rx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 0. "RXTIE,Receive threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x81A4)++0x03
line.long 0x00 "RB$2IDR,Rx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 0. "RXT,Receive threshold" "No threshold,Threshold"
group.long ($1+0x81A8)++0x07
line.long 0x00 "RB$2ICR0,Rx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--8. 0x01 "ICPT,Interrupt coalescing packet threshold"
line.long 0x04 "RB$2ICR1,Rx BDR $2 Interrupt Coalescing Register 1"
tree.end
repeat.end
tree.end
tree "ENETC_P0_SI1"
base ad:0x1F81D0000
group.long 0x00++0x03
line.long 0x00 "SIMR,Station Interface Mode Register"
bitfld.long 0x00 31. "EN,Enable station interface" "Disabled,Enabled"
bitfld.long 0x00 16. "DEFAULT_RX_GROUP,Default receive group" "0,1"
bitfld.long 0x00 4. "V2IPVE,VLAN to IPV mapping enable" "Disabled,Enabled"
bitfld.long 0x00 3. "RNBM,Receive no broad-cast mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "RNMM,Receive no multi-cast mode" "Disabled,Enabled"
bitfld.long 0x00 1. "RNUM,Receive no unicast-cast mode" "Disabled,Enabled"
bitfld.long 0x00 0. "RSEE,RSS classification enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "SISR,Station Interface Status Register"
bitfld.long 0x00 4. "VLAN_UTA,SI VLAN untagged frames accepted" "Not accepted,Accepted"
bitfld.long 0x00 3. "VLAN_P,SI VLAN promiscuous" "0,1"
bitfld.long 0x00 2. "MAC_MP,SI MAC multicast promiscuous" "0,1"
bitfld.long 0x00 1. "MAC_UP,SI MAC unicast promiscuous" "0,1"
newline
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
repeat 2. (increment 0x18 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SICTR$2,Station Interface Current Time Register $2"
repeat.end
rgroup.long 0x20++0x07
line.long 0x00 "SIPCAPR0,Station Interface Port Capability Register 0"
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating" "Not supported,Supported"
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload support" "Not supported,Supported"
line.long 0x04 "SIPCAPR1,Station Interface Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1k,2k,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multicast hash entries per SI" "64,128,256,512"
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1,2,3,4,5,6,7,8"
rgroup.long 0x30++0x03
line.long 0x00 "SITGTGR,Station Interface Time Gating Tick Granularity Register"
group.long 0x38++0x03
line.long 0x00 "SIRBGCR,Station Interface Receive BDR Group Control Register"
bitfld.long 0x00 16.--18. "RINGS_PER_GROUP,Number of rings per group" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 0.--1. "NUM_GROUPS,Number of groups used" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SICAR0,Station Interface Cache Attribute Register 0"
bitfld.long 0x00 30. "RDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "RDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "RDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "BD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "BD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "WRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "WRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "BD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "BD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x48++0x03
line.long 0x00 "SICAR2,Station Interface Cache Attribute Register 2"
bitfld.long 0x00 30. "CRDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "CRDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "CRDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "CBD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "CBD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "CBD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "CWRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "CWRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "CBD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "CBD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "CBD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x80++0x07
line.long 0x00 "SIPMAR0,Station Interface Primary MAC Address Register 0"
line.long 0x04 "SIPMAR1,Station Interface Primary MAC Address Register 1"
hexmask.long.word 0x04 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
repeat 2. (increment 0x90 0x04)(increment 1 1)
rgroup.long $1++0x03
line.long 0x00 "SICVLANR$2,Station Interface Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x100++0x07
line.long 0x00 "SIVLANIPVMR0,Station Interface VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
line.long 0x04 "SIVLANIPVMR1,Station Interface VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
group.long 0x150++0x03
line.long 0x00 "SIIPVBDRMR,Station Interface IPV To Ring Mapping Register"
bitfld.long 0x00 28.--30. "IPV7BDR,BD ring used within the group for IPV 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6BDR,BD ring used within the group for IPV 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "IPV5BDR,BD ring used within the group for IPV 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4BDR,BD ring used within the group for IPV 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3BDR,BD ring used within the group for IPV 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2BDR,BD ring used within the group for IPV 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "IPV1BDR,BD ring used within the group for IPV 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0BDR,BD ring used within the group for IPV 0" "0,1,2,3,4,5,6,7"
group.long 0x204++0x07
line.long 0x00 "VSIMSGSR,Virtual Station Interface Message Send Register"
hexmask.long.word 0x00 16.--31. 1. "MC,Message code"
bitfld.long 0x00 1. "MS,Message status" "Success,Fail"
bitfld.long 0x00 0. "MB,Message busy" "Idle,Busy"
line.long 0x04 "VSIMSGRR,Virtual Station Interface Message Receive Register"
hexmask.long.word 0x04 16.--31. 1. "MC,Message code"
bitfld.long 0x04 0. "MR,Message received" "Not received,Received"
group.long 0x210++0x07
line.long 0x00 "VSIMSGSNDAR0,Virtual Station Interface Message Send Register 0"
hexmask.long 0x00 6.--31. 0x40 "ADDRL,Message address low"
bitfld.long 0x00 0.--4. "MSIZE,Message size" "1024B,32B,64B,96B,128B,160B,192B,224B,256B,288B,320B,352B,384B,416B,448B,480B,512B,544B,576B,608B,640B,672B,704B,736B,768B,800B,832B,864B,896B,928B,960B,992B"
line.long 0x04 "VSIMSGSNDAR1,Virtual Station Interface Message Send Register 1"
repeat 2. (increment 0x300 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIROCT$2,Station Interface Receive Octets Counter $2"
repeat.end
repeat 2. (increment 0x308 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRFRM$2,Station Interface Receive Frame Counter $2"
repeat.end
repeat 2. (increment 0x310 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRUCA$2,Station Interface Receive Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x318 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRMCA$2,Station Interface Receive Multicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x320 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITOCT$2,Station Interface Transmit Octets Counter $2"
repeat.end
repeat 2. (increment 0x328 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITFRM$2,Station Interface Transmit Frame Counter $2"
repeat.end
repeat 2. (increment 0x330 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITUCA$2,Station Interface Transmit Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x338 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITMCA$2,Station Interface Transmit Multicast Frame Counter $2"
repeat.end
group.long 0x800++0x03
line.long 0x00 "SICBDRMR,Station Interface Control BDR Mode Register"
bitfld.long 0x00 31. "EN,Enable control buffer descriptor ring" "Disabled,Enabled"
rgroup.long 0x804++0x03
line.long 0x00 "SICBDRSR,Station Interface Control BDR Status Register"
bitfld.long 0x00 0. "BUSY,Busy" "Idle,Busy"
group.long 0x810++0x13
line.long 0x00 "SICBDRBAR0,Station Interface Control BDR Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits"
line.long 0x04 "SICBDRBAR1,Station Interface Control BDR Base Address Register 1"
line.long 0x08 "SICBDRPIR,Station Interface Control BDR Producer Index Register"
hexmask.long.word 0x08 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring producer index"
line.long 0x0C "SICBDRCIR,Station Interface Control BDR Consumer Index Register"
hexmask.long.word 0x0C 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring consumer index"
line.long 0x10 "SICBDRLENR,Station Interface Control BDR Length Register"
hexmask.long.word 0x10 3.--10. 0x08 "LENGTH,BD ring length"
group.long 0x8A4++0x03
line.long 0x00 "SICBDREDR,Station Interface Control BDR Event Detect Register"
eventfld.long 0x00 0. "CBDC,Control BD completed" "Not completed,Completed"
rgroup.long 0x900++0x0B
line.long 0x00 "SICAPR0,Station Interface Capability Register 0"
bitfld.long 0x00 28.--29. "NUM_MAC_ADR,Number of MAC address" "1,2,3,4"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
line.long 0x04 "SICAPR1,Station Interface Capability Register 1"
hexmask.long.byte 0x04 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI"
line.long 0x08 "SICAPR2,Station Interface Capability Register 2"
bitfld.long 0x08 3. "VTP[3],VLAN types permitted bit 3 [Standard C-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 2. "VTP[2],VLAN types permitted bit 2 [Standard S-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 1. "VTP[1],VLAN types permitted bit 1 [VLAN defined by PCVLANR1]" "Not permitted,Permitted"
bitfld.long 0x08 0. "VTP[0],VLAN types permitted bit 0 [VLAN defined by PCVLANR2]" "Not permitted,Permitted"
group.long 0xA00++0x03
line.long 0x00 "VSIIER,Virtual Station Interface Interrupt Enable Register"
bitfld.long 0x00 9. "MRIE,Message received interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "MSIE,Message sent interrupt enable" "Disabled,Enabled"
group.long 0xA08++0x03
line.long 0x00 "VSIIDR,Virtual Station Interface Interrupt Detect Register"
rbitfld.long 0x00 16. "RXR,Summary of detected interrupt for all receive rings belonging to the SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "MR,Message received" "Not received,Received"
newline
eventfld.long 0x00 8. "MS,Message sent" "Not sent,Sent"
rbitfld.long 0x00 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI" "No interrupt,Interrupt"
group.long 0xA18++0x03
line.long 0x00 "SITXIDR,Station Interface Transmit Interrupt Detect Register"
eventfld.long 0x00 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "TXT9,Summary of detected threshold frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "TXT8,Summary of detected threshold frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "TXT7,Summary of detected threshold frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "TXT6,Summary of detected threshold frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "TXT5,Summary of detected threshold frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "TXT4,Summary of detected threshold frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "TXT3,Summary of detected threshold frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "TXT2,Summary of detected threshold frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "TXT1,Summary of detected threshold frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "TXT0,Summary of detected threshold frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA28++0x03
line.long 0x00 "SIRXIDR,Station Interface Receive Interrupt Detect Register"
eventfld.long 0x00 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA30++0x03
line.long 0x00 "SIMSIVR,Station Interface MSI-X Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat 16. (increment 0xB00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSITR$2VR,Station Interface MSI-X Transmit Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 16. (increment 0xB80 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSIRR$2VR,Station Interface MSI-X Receive Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
group.long 0xE20++0x07
line.long 0x00 "SIUEDR,Station Interface Uncorrectable Error Detect Register"
eventfld.long 0x00 19. "DROP_RING_SEL,Non-existing receive ring counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 18. "DROP_GRP_SEL,Non-existing receive group counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 17. "DROP_RING_EN,Station interface ring disabled drop counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 16. "DROP_SI_EN,Station interface disabled drop counted in SIUEFDCR" "No effect,Cleared"
newline
eventfld.long 0x00 0. "PE,Programming error" "No effect,Cleared"
line.long 0x04 "SIUERER,Station Interface Uncorrectable Error Report Enable Register"
bitfld.long 0x04 0. "PERE,Programming error report enable" "Disabled,Enabled"
rgroup.long 0xE28++0x03
line.long 0x00 "SIUEFDCR,Station Interface Uncorrectable Error Frame Drop Count Register"
rgroup.long 0xE30++0x03
line.long 0x00 "SIUMEDR,Station Interface Uncorrectable Memory Error Detect Register"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
bitfld.long 0x00 30. "M,Multiple" "Low,High"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE38++0x03
line.long 0x00 "SIUSBEDR,Station Interface Uncorrectable System Bus Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Not valid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "Low,High"
bitfld.long 0x00 29. "RD,Report disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
rgroup.long 0x1000++0x03
line.long 0x00 "SIMAFTCAPR,Station Interface MAC Address Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI"
rgroup.long 0x1100++0x03
line.long 0x00 "SIVFTCAPR,Station Interface VLAN Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI"
rgroup.long 0x1200++0x03
line.long 0x00 "SIRFSCAPR,Station Interface RFS Capability Register"
hexmask.long.word 0x00 0.--8. 0x01 "NUM_RFS,Number of receive flow steering entries available for use"
rgroup.long 0x1600++0x03
line.long 0x00 "SIRSSCAPR,Station Interface RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 16. (increment 0x00 0x200)(increment 0 1)
tree "BDR $2"
group.long ($1+0x8000)++0x07
line.long 0x00 "TB$2MR,Tx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable transmit buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 9. "VIH,VLAN insert hint" "Not inserted,Inserted"
bitfld.long 0x00 8. "CRC,User CRC provided" "Not provided,Provided"
bitfld.long 0x00 4.--6. "WRR,WRR weight" "1,2,3,4,5,6,7,8"
newline
bitfld.long 0x00 0.--2. "PRIO,Priority" "Lowest,1,2,3,4,5,6,Highest"
line.long 0x04 "TB$2SR,Tx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "BUSY,Transmit ring is busy" "Idle,Busy"
group.long ($1+0x8010)++0x13
line.long 0x00 "TB$2BAR0,Tx BDR $2 Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x04 "TB$2BAR1,Tx BDR $2 Base Address Register 1"
line.long 0x08 "TB$2PIR,Tx BDR $2 Producer Index Register"
hexmask.long.word 0x08 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
line.long 0x0C "TB$2CIR,Tx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 16.--31. 0x01 "STAT_ID,Status identifier"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring consumer index"
line.long 0x10 "TB$2LENR,Tx BDR $2 Length Register"
hexmask.long.tbyte 0x10 3.--16. 0x08 "LENGTH,BD ring length"
group.long ($1+0x80A0)++0x03
line.long 0x00 "TB$2IER,Tx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 1. "TXFIE,Transmit frame interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TXTIE,Transmit threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x80A4)++0x03
line.long 0x00 "TB$2IDR,Tx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 1. "TXF,Transmit of frame" "No transmit,Transmit"
bitfld.long 0x00 0. "TXT,Transmit threshold" "No threshold,Threshold"
group.long ($1+0x80A8)++0x07
line.long 0x00 "TB$2ICR0,Tx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "ICPT,Interrupt coalescing packet threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384"
line.long 0x04 "TB$2ICR1,Tx BDR $2 Interrupt Coalescing Register 1"
group.long ($1+0x8100)++0x1B
line.long 0x00 "RB$2MR,Rx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable receive buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 6. "VTPD,VLAN tag presentation disable" "No,Yes"
bitfld.long 0x00 5. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CM,Congestion mode" "Lossy,Lossless"
newline
bitfld.long 0x00 2. "BDS,BD size" "16B,32B"
bitfld.long 0x00 0. "AL,Header alignment" "Not added,Added"
line.long 0x04 "RB$2SR,Rx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "EMPTY,Ring is empty" "Not empty,Empty"
line.long 0x08 "RB$2BSR,Rx BDR $2 Buffer Size Register"
hexmask.long.word 0x08 0.--15. 0x01 "BSIZE,Buffer size"
line.long 0x0C "RB$2CIR,Rx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,receive buffer descriptor ring consumer index"
line.long 0x10 "RB$2BAR0,Rx BDR $2 Base Address Register 0"
hexmask.long 0x10 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x14 "RB$2BAR1,Rx BDR $2 Base Address Register 1"
line.long 0x18 "RB$2PIR,Rx BDR $2 Producer Index Register"
hexmask.long.word 0x18 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
group.long ($1+0x8120)++0x03
line.long 0x00 "RB$2LENR,Rx BDR $2 Length Register"
hexmask.long.tbyte 0x00 3.--16. 0x08 "LENGTH,BD ring length"
rgroup.long ($1+0x8180)++0x03
line.long 0x00 "RB$2DCR,Rx BDR $2 Drop Count Register"
group.long ($1+0x81A0)++0x03
line.long 0x00 "RB$2IER,Rx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 0. "RXTIE,Receive threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x81A4)++0x03
line.long 0x00 "RB$2IDR,Rx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 0. "RXT,Receive threshold" "No threshold,Threshold"
group.long ($1+0x81A8)++0x07
line.long 0x00 "RB$2ICR0,Rx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--8. 0x01 "ICPT,Interrupt coalescing packet threshold"
line.long 0x04 "RB$2ICR1,Rx BDR $2 Interrupt Coalescing Register 1"
tree.end
repeat.end
tree.end
tree "ENETC_P0_SI2"
base ad:0x1F81E0000
group.long 0x00++0x03
line.long 0x00 "SIMR,Station Interface Mode Register"
bitfld.long 0x00 31. "EN,Enable station interface" "Disabled,Enabled"
bitfld.long 0x00 16. "DEFAULT_RX_GROUP,Default receive group" "0,1"
bitfld.long 0x00 4. "V2IPVE,VLAN to IPV mapping enable" "Disabled,Enabled"
bitfld.long 0x00 3. "RNBM,Receive no broad-cast mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "RNMM,Receive no multi-cast mode" "Disabled,Enabled"
bitfld.long 0x00 1. "RNUM,Receive no unicast-cast mode" "Disabled,Enabled"
bitfld.long 0x00 0. "RSEE,RSS classification enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "SISR,Station Interface Status Register"
bitfld.long 0x00 4. "VLAN_UTA,SI VLAN untagged frames accepted" "Not accepted,Accepted"
bitfld.long 0x00 3. "VLAN_P,SI VLAN promiscuous" "0,1"
bitfld.long 0x00 2. "MAC_MP,SI MAC multicast promiscuous" "0,1"
bitfld.long 0x00 1. "MAC_UP,SI MAC unicast promiscuous" "0,1"
newline
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
repeat 2. (increment 0x18 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SICTR$2,Station Interface Current Time Register $2"
repeat.end
rgroup.long 0x20++0x07
line.long 0x00 "SIPCAPR0,Station Interface Port Capability Register 0"
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating" "Not supported,Supported"
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload support" "Not supported,Supported"
line.long 0x04 "SIPCAPR1,Station Interface Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1k,2k,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multicast hash entries per SI" "64,128,256,512"
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1,2,3,4,5,6,7,8"
rgroup.long 0x30++0x03
line.long 0x00 "SITGTGR,Station Interface Time Gating Tick Granularity Register"
group.long 0x38++0x03
line.long 0x00 "SIRBGCR,Station Interface Receive BDR Group Control Register"
bitfld.long 0x00 16.--18. "RINGS_PER_GROUP,Number of rings per group" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 0.--1. "NUM_GROUPS,Number of groups used" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SICAR0,Station Interface Cache Attribute Register 0"
bitfld.long 0x00 30. "RDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "RDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "RDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "BD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "BD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "WRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "WRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "BD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "BD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x48++0x03
line.long 0x00 "SICAR2,Station Interface Cache Attribute Register 2"
bitfld.long 0x00 30. "CRDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "CRDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "CRDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "CBD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "CBD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "CBD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "CWRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "CWRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "CBD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "CBD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "CBD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x80++0x07
line.long 0x00 "SIPMAR0,Station Interface Primary MAC Address Register 0"
line.long 0x04 "SIPMAR1,Station Interface Primary MAC Address Register 1"
hexmask.long.word 0x04 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
repeat 2. (increment 0x90 0x04)(increment 1 1)
rgroup.long $1++0x03
line.long 0x00 "SICVLANR$2,Station Interface Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x100++0x07
line.long 0x00 "SIVLANIPVMR0,Station Interface VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
line.long 0x04 "SIVLANIPVMR1,Station Interface VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
group.long 0x150++0x03
line.long 0x00 "SIIPVBDRMR,Station Interface IPV To Ring Mapping Register"
bitfld.long 0x00 28.--30. "IPV7BDR,BD ring used within the group for IPV 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6BDR,BD ring used within the group for IPV 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "IPV5BDR,BD ring used within the group for IPV 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4BDR,BD ring used within the group for IPV 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3BDR,BD ring used within the group for IPV 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2BDR,BD ring used within the group for IPV 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "IPV1BDR,BD ring used within the group for IPV 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0BDR,BD ring used within the group for IPV 0" "0,1,2,3,4,5,6,7"
group.long 0x204++0x07
line.long 0x00 "VSIMSGSR,Virtual Station Interface Message Send Register"
hexmask.long.word 0x00 16.--31. 1. "MC,Message code"
bitfld.long 0x00 1. "MS,Message status" "Success,Fail"
bitfld.long 0x00 0. "MB,Message busy" "Idle,Busy"
line.long 0x04 "VSIMSGRR,Virtual Station Interface Message Receive Register"
hexmask.long.word 0x04 16.--31. 1. "MC,Message code"
bitfld.long 0x04 0. "MR,Message received" "Not received,Received"
group.long 0x210++0x07
line.long 0x00 "VSIMSGSNDAR0,Virtual Station Interface Message Send Register 0"
hexmask.long 0x00 6.--31. 0x40 "ADDRL,Message address low"
bitfld.long 0x00 0.--4. "MSIZE,Message size" "1024B,32B,64B,96B,128B,160B,192B,224B,256B,288B,320B,352B,384B,416B,448B,480B,512B,544B,576B,608B,640B,672B,704B,736B,768B,800B,832B,864B,896B,928B,960B,992B"
line.long 0x04 "VSIMSGSNDAR1,Virtual Station Interface Message Send Register 1"
repeat 2. (increment 0x300 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIROCT$2,Station Interface Receive Octets Counter $2"
repeat.end
repeat 2. (increment 0x308 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRFRM$2,Station Interface Receive Frame Counter $2"
repeat.end
repeat 2. (increment 0x310 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRUCA$2,Station Interface Receive Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x318 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRMCA$2,Station Interface Receive Multicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x320 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITOCT$2,Station Interface Transmit Octets Counter $2"
repeat.end
repeat 2. (increment 0x328 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITFRM$2,Station Interface Transmit Frame Counter $2"
repeat.end
repeat 2. (increment 0x330 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITUCA$2,Station Interface Transmit Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x338 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITMCA$2,Station Interface Transmit Multicast Frame Counter $2"
repeat.end
group.long 0x800++0x03
line.long 0x00 "SICBDRMR,Station Interface Control BDR Mode Register"
bitfld.long 0x00 31. "EN,Enable control buffer descriptor ring" "Disabled,Enabled"
rgroup.long 0x804++0x03
line.long 0x00 "SICBDRSR,Station Interface Control BDR Status Register"
bitfld.long 0x00 0. "BUSY,Busy" "Idle,Busy"
group.long 0x810++0x13
line.long 0x00 "SICBDRBAR0,Station Interface Control BDR Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits"
line.long 0x04 "SICBDRBAR1,Station Interface Control BDR Base Address Register 1"
line.long 0x08 "SICBDRPIR,Station Interface Control BDR Producer Index Register"
hexmask.long.word 0x08 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring producer index"
line.long 0x0C "SICBDRCIR,Station Interface Control BDR Consumer Index Register"
hexmask.long.word 0x0C 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring consumer index"
line.long 0x10 "SICBDRLENR,Station Interface Control BDR Length Register"
hexmask.long.word 0x10 3.--10. 0x08 "LENGTH,BD ring length"
group.long 0x8A4++0x03
line.long 0x00 "SICBDREDR,Station Interface Control BDR Event Detect Register"
eventfld.long 0x00 0. "CBDC,Control BD completed" "Not completed,Completed"
rgroup.long 0x900++0x0B
line.long 0x00 "SICAPR0,Station Interface Capability Register 0"
bitfld.long 0x00 28.--29. "NUM_MAC_ADR,Number of MAC address" "1,2,3,4"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
line.long 0x04 "SICAPR1,Station Interface Capability Register 1"
hexmask.long.byte 0x04 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI"
line.long 0x08 "SICAPR2,Station Interface Capability Register 2"
bitfld.long 0x08 3. "VTP[3],VLAN types permitted bit 3 [Standard C-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 2. "VTP[2],VLAN types permitted bit 2 [Standard S-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 1. "VTP[1],VLAN types permitted bit 1 [VLAN defined by PCVLANR1]" "Not permitted,Permitted"
bitfld.long 0x08 0. "VTP[0],VLAN types permitted bit 0 [VLAN defined by PCVLANR2]" "Not permitted,Permitted"
group.long 0xA00++0x03
line.long 0x00 "VSIIER,Virtual Station Interface Interrupt Enable Register"
bitfld.long 0x00 9. "MRIE,Message received interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "MSIE,Message sent interrupt enable" "Disabled,Enabled"
group.long 0xA08++0x03
line.long 0x00 "VSIIDR,Virtual Station Interface Interrupt Detect Register"
rbitfld.long 0x00 16. "RXR,Summary of detected interrupt for all receive rings belonging to the SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "MR,Message received" "Not received,Received"
newline
eventfld.long 0x00 8. "MS,Message sent" "Not sent,Sent"
rbitfld.long 0x00 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI" "No interrupt,Interrupt"
group.long 0xA18++0x03
line.long 0x00 "SITXIDR,Station Interface Transmit Interrupt Detect Register"
eventfld.long 0x00 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "TXT9,Summary of detected threshold frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "TXT8,Summary of detected threshold frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "TXT7,Summary of detected threshold frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "TXT6,Summary of detected threshold frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "TXT5,Summary of detected threshold frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "TXT4,Summary of detected threshold frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "TXT3,Summary of detected threshold frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "TXT2,Summary of detected threshold frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "TXT1,Summary of detected threshold frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "TXT0,Summary of detected threshold frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA28++0x03
line.long 0x00 "SIRXIDR,Station Interface Receive Interrupt Detect Register"
eventfld.long 0x00 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA30++0x03
line.long 0x00 "SIMSIVR,Station Interface MSI-X Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat 16. (increment 0xB00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSITR$2VR,Station Interface MSI-X Transmit Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 16. (increment 0xB80 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSIRR$2VR,Station Interface MSI-X Receive Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
group.long 0xE20++0x07
line.long 0x00 "SIUEDR,Station Interface Uncorrectable Error Detect Register"
eventfld.long 0x00 19. "DROP_RING_SEL,Non-existing receive ring counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 18. "DROP_GRP_SEL,Non-existing receive group counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 17. "DROP_RING_EN,Station interface ring disabled drop counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 16. "DROP_SI_EN,Station interface disabled drop counted in SIUEFDCR" "No effect,Cleared"
newline
eventfld.long 0x00 0. "PE,Programming error" "No effect,Cleared"
line.long 0x04 "SIUERER,Station Interface Uncorrectable Error Report Enable Register"
bitfld.long 0x04 0. "PERE,Programming error report enable" "Disabled,Enabled"
rgroup.long 0xE28++0x03
line.long 0x00 "SIUEFDCR,Station Interface Uncorrectable Error Frame Drop Count Register"
rgroup.long 0xE30++0x03
line.long 0x00 "SIUMEDR,Station Interface Uncorrectable Memory Error Detect Register"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
bitfld.long 0x00 30. "M,Multiple" "Low,High"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE38++0x03
line.long 0x00 "SIUSBEDR,Station Interface Uncorrectable System Bus Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Not valid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "Low,High"
bitfld.long 0x00 29. "RD,Report disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
rgroup.long 0x1000++0x03
line.long 0x00 "SIMAFTCAPR,Station Interface MAC Address Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI"
rgroup.long 0x1100++0x03
line.long 0x00 "SIVFTCAPR,Station Interface VLAN Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI"
rgroup.long 0x1200++0x03
line.long 0x00 "SIRFSCAPR,Station Interface RFS Capability Register"
hexmask.long.word 0x00 0.--8. 0x01 "NUM_RFS,Number of receive flow steering entries available for use"
rgroup.long 0x1600++0x03
line.long 0x00 "SIRSSCAPR,Station Interface RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 16. (increment 0x00 0x200)(increment 0 1)
tree "BDR $2"
group.long ($1+0x8000)++0x07
line.long 0x00 "TB$2MR,Tx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable transmit buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 9. "VIH,VLAN insert hint" "Not inserted,Inserted"
bitfld.long 0x00 8. "CRC,User CRC provided" "Not provided,Provided"
bitfld.long 0x00 4.--6. "WRR,WRR weight" "1,2,3,4,5,6,7,8"
newline
bitfld.long 0x00 0.--2. "PRIO,Priority" "Lowest,1,2,3,4,5,6,Highest"
line.long 0x04 "TB$2SR,Tx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "BUSY,Transmit ring is busy" "Idle,Busy"
group.long ($1+0x8010)++0x13
line.long 0x00 "TB$2BAR0,Tx BDR $2 Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x04 "TB$2BAR1,Tx BDR $2 Base Address Register 1"
line.long 0x08 "TB$2PIR,Tx BDR $2 Producer Index Register"
hexmask.long.word 0x08 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
line.long 0x0C "TB$2CIR,Tx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 16.--31. 0x01 "STAT_ID,Status identifier"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring consumer index"
line.long 0x10 "TB$2LENR,Tx BDR $2 Length Register"
hexmask.long.tbyte 0x10 3.--16. 0x08 "LENGTH,BD ring length"
group.long ($1+0x80A0)++0x03
line.long 0x00 "TB$2IER,Tx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 1. "TXFIE,Transmit frame interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TXTIE,Transmit threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x80A4)++0x03
line.long 0x00 "TB$2IDR,Tx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 1. "TXF,Transmit of frame" "No transmit,Transmit"
bitfld.long 0x00 0. "TXT,Transmit threshold" "No threshold,Threshold"
group.long ($1+0x80A8)++0x07
line.long 0x00 "TB$2ICR0,Tx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "ICPT,Interrupt coalescing packet threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384"
line.long 0x04 "TB$2ICR1,Tx BDR $2 Interrupt Coalescing Register 1"
group.long ($1+0x8100)++0x1B
line.long 0x00 "RB$2MR,Rx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable receive buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 6. "VTPD,VLAN tag presentation disable" "No,Yes"
bitfld.long 0x00 5. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CM,Congestion mode" "Lossy,Lossless"
newline
bitfld.long 0x00 2. "BDS,BD size" "16B,32B"
bitfld.long 0x00 0. "AL,Header alignment" "Not added,Added"
line.long 0x04 "RB$2SR,Rx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "EMPTY,Ring is empty" "Not empty,Empty"
line.long 0x08 "RB$2BSR,Rx BDR $2 Buffer Size Register"
hexmask.long.word 0x08 0.--15. 0x01 "BSIZE,Buffer size"
line.long 0x0C "RB$2CIR,Rx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,receive buffer descriptor ring consumer index"
line.long 0x10 "RB$2BAR0,Rx BDR $2 Base Address Register 0"
hexmask.long 0x10 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x14 "RB$2BAR1,Rx BDR $2 Base Address Register 1"
line.long 0x18 "RB$2PIR,Rx BDR $2 Producer Index Register"
hexmask.long.word 0x18 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
group.long ($1+0x8120)++0x03
line.long 0x00 "RB$2LENR,Rx BDR $2 Length Register"
hexmask.long.tbyte 0x00 3.--16. 0x08 "LENGTH,BD ring length"
rgroup.long ($1+0x8180)++0x03
line.long 0x00 "RB$2DCR,Rx BDR $2 Drop Count Register"
group.long ($1+0x81A0)++0x03
line.long 0x00 "RB$2IER,Rx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 0. "RXTIE,Receive threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x81A4)++0x03
line.long 0x00 "RB$2IDR,Rx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 0. "RXT,Receive threshold" "No threshold,Threshold"
group.long ($1+0x81A8)++0x07
line.long 0x00 "RB$2ICR0,Rx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--8. 0x01 "ICPT,Interrupt coalescing packet threshold"
line.long 0x04 "RB$2ICR1,Rx BDR $2 Interrupt Coalescing Register 1"
tree.end
repeat.end
tree.end
tree "ENETC_P1_SI0"
base ad:0x1F8040000
group.long 0x00++0x03
line.long 0x00 "SIMR,Station Interface Mode Register"
bitfld.long 0x00 31. "EN,Enable station interface" "Disabled,Enabled"
bitfld.long 0x00 16. "DEFAULT_RX_GROUP,Default receive group" "0,1"
bitfld.long 0x00 4. "V2IPVE,VLAN to IPV mapping enable" "Disabled,Enabled"
bitfld.long 0x00 3. "RNBM,Receive no broad-cast mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "RNMM,Receive no multi-cast mode" "Disabled,Enabled"
bitfld.long 0x00 1. "RNUM,Receive no unicast-cast mode" "Disabled,Enabled"
bitfld.long 0x00 0. "RSEE,RSS classification enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "SISR,Station Interface Status Register"
bitfld.long 0x00 4. "VLAN_UTA,SI VLAN untagged frames accepted" "Not accepted,Accepted"
bitfld.long 0x00 3. "VLAN_P,SI VLAN promiscuous" "0,1"
bitfld.long 0x00 2. "MAC_MP,SI MAC multicast promiscuous" "0,1"
bitfld.long 0x00 1. "MAC_UP,SI MAC unicast promiscuous" "0,1"
newline
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
repeat 2. (increment 0x18 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SICTR$2,Station Interface Current Time Register $2"
repeat.end
rgroup.long 0x20++0x07
line.long 0x00 "SIPCAPR0,Station Interface Port Capability Register 0"
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating" "Not supported,Supported"
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload support" "Not supported,Supported"
line.long 0x04 "SIPCAPR1,Station Interface Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1k,2k,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multicast hash entries per SI" "64,128,256,512"
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1,2,3,4,5,6,7,8"
rgroup.long 0x30++0x03
line.long 0x00 "SITGTGR,Station Interface Time Gating Tick Granularity Register"
group.long 0x38++0x03
line.long 0x00 "SIRBGCR,Station Interface Receive BDR Group Control Register"
bitfld.long 0x00 16.--18. "RINGS_PER_GROUP,Number of rings per group" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 0.--1. "NUM_GROUPS,Number of groups used" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SICAR0,Station Interface Cache Attribute Register 0"
bitfld.long 0x00 30. "RDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "RDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "RDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "BD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "BD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "WRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "WRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "BD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "BD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x44++0x03
line.long 0x00 "SICAR1,Station Interface Cache Attribute Register 1"
bitfld.long 0x00 22. "MSG_RDSNP,SI messaging read data snoop" "0,1"
bitfld.long 0x00 20.--21. "MSG_RDDOMAIN,SI messaging read data domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "MSG_RDCACHE,SI messaging read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "MSG_WRSNP,SI messaging write snoop" "0,1"
newline
bitfld.long 0x00 4.--5. "MSG_WRDOMAIN,SI messaging write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "MSG_WRCACHE,SI messaging write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x48++0x03
line.long 0x00 "SICAR2,Station Interface Cache Attribute Register 2"
bitfld.long 0x00 30. "CRDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "CRDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "CRDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "CBD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "CBD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "CBD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "CWRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "CWRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "CBD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "CBD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "CBD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x80++0x07
line.long 0x00 "SIPMAR0,Station Interface Primary MAC Address Register 0"
line.long 0x04 "SIPMAR1,Station Interface Primary MAC Address Register 1"
hexmask.long.word 0x04 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
repeat 2. (increment 0x90 0x04)(increment 1 1)
rgroup.long $1++0x03
line.long 0x00 "SICVLANR$2,Station Interface Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x100++0x07
line.long 0x00 "SIVLANIPVMR0,Station Interface VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
line.long 0x04 "SIVLANIPVMR1,Station Interface VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
group.long 0x150++0x03
line.long 0x00 "SIIPVBDRMR,Station Interface IPV To Ring Mapping Register"
bitfld.long 0x00 28.--30. "IPV7BDR,BD ring used within the group for IPV 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6BDR,BD ring used within the group for IPV 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "IPV5BDR,BD ring used within the group for IPV 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4BDR,BD ring used within the group for IPV 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3BDR,BD ring used within the group for IPV 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2BDR,BD ring used within the group for IPV 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "IPV1BDR,BD ring used within the group for IPV 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0BDR,BD ring used within the group for IPV 0" "0,1,2,3,4,5,6,7"
group.long 0x204++0x07
line.long 0x00 "PSIMSGRR,Physical Station Interface Message Receive Register"
hexmask.long.word 0x00 16.--31. 1. "MC,Message code"
eventfld.long 0x00 2. "MR2,Message received from VSI 2" "Not received,Received"
eventfld.long 0x00 1. "MR1,Message received from VSI 1" "Not received,Received"
line.long 0x04 "PSIMSGSR,Physical Station Interface Message Send Register"
hexmask.long.word 0x04 16.--31. 1. "MC,Message code"
eventfld.long 0x04 2. "MR2,Message received from VSI 2" "Not received,Received"
eventfld.long 0x04 1. "MR1,Message received from VSI 1" "Not received,Received"
repeat 2. (increment 0x210 0x08)(increment 1 1)
group.long $1++0x07
line.long 0x00 "PSIV$2MSGRCVAR0,PSI VSI $2 Message Receive Address Register 0"
hexmask.long 0x00 6.--31. 0x40 "ADDRL,Message address low"
rbitfld.long 0x00 0.--4. "MSIZE,Message size" "1024B,32B,64B,96B,128B,160B,192B,224B,256B,288B,320B,352B,384B,416B,448B,480B,512B,544B,576B,608B,640B,672B,704B,736B,768B,800B,832B,864B,896B,928B,960B,992B"
line.long 0x04 "PSIV$2MSGRCVAR1,PSI VSI $2 Message Receive Address Register 1"
repeat.end
repeat 2. (increment 0x300 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIROCT$2,Station Interface Receive Octets Counter $2"
repeat.end
repeat 2. (increment 0x308 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRFRM$2,Station Interface Receive Frame Counter $2"
repeat.end
repeat 2. (increment 0x310 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRUCA$2,Station Interface Receive Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x318 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRMCA$2,Station Interface Receive Multicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x320 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITOCT$2,Station Interface Transmit Octets Counter $2"
repeat.end
repeat 2. (increment 0x328 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITFRM$2,Station Interface Transmit Frame Counter $2"
repeat.end
repeat 2. (increment 0x330 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITUCA$2,Station Interface Transmit Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x338 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITMCA$2,Station Interface Transmit Multicast Frame Counter $2"
repeat.end
group.long 0x800++0x03
line.long 0x00 "SICBDRMR,Station Interface Control BDR Mode Register"
bitfld.long 0x00 31. "EN,Enable control buffer descriptor ring" "Disabled,Enabled"
rgroup.long 0x804++0x03
line.long 0x00 "SICBDRSR,Station Interface Control BDR Status Register"
bitfld.long 0x00 0. "BUSY,Busy" "Idle,Busy"
group.long 0x810++0x13
line.long 0x00 "SICBDRBAR0,Station Interface Control BDR Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits"
line.long 0x04 "SICBDRBAR1,Station Interface Control BDR Base Address Register 1"
line.long 0x08 "SICBDRPIR,Station Interface Control BDR Producer Index Register"
hexmask.long.word 0x08 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring producer index"
line.long 0x0C "SICBDRCIR,Station Interface Control BDR Consumer Index Register"
hexmask.long.word 0x0C 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring consumer index"
line.long 0x10 "SICBDRLENR,Station Interface Control BDR Length Register"
hexmask.long.word 0x10 3.--10. 0x08 "LENGTH,BD ring length"
group.long 0x8A4++0x03
line.long 0x00 "SICBDREDR,Station Interface Control BDR Event Detect Register"
eventfld.long 0x00 0. "CBDC,Control BD completed" "Not completed,Completed"
rgroup.long 0x900++0x0B
line.long 0x00 "SICAPR0,Station Interface Capability Register 0"
bitfld.long 0x00 28.--29. "NUM_MAC_ADR,Number of MAC address" "1,2,3,4"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
line.long 0x04 "SICAPR1,Station Interface Capability Register 1"
hexmask.long.byte 0x04 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI"
line.long 0x08 "SICAPR2,Station Interface Capability Register 2"
bitfld.long 0x08 3. "VTP[3],VLAN types permitted bit 3 [Standard C-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 2. "VTP[2],VLAN types permitted bit 2 [Standard S-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 1. "VTP[1],VLAN types permitted bit 1 [VLAN defined by PCVLANR1]" "Not permitted,Permitted"
bitfld.long 0x08 0. "VTP[0],VLAN types permitted bit 0 [VLAN defined by PCVLANR2]" "Not permitted,Permitted"
group.long 0xA00++0x03
line.long 0x00 "PSIIER,Physical Station Interface Interrupt Enable Register"
bitfld.long 0x00 18. "FLR2IE,Function 2 level reset interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 17. "FLR1IE,Function 1 level reset interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "MR2IE,Message 2 receive interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "MR1IE,Message 1 receive interrupt enable" "Disabled,Enabled"
group.long 0xA08++0x03
line.long 0x00 "PSIIDR,Physical Station Interface Interrupt Detect Register"
eventfld.long 0x00 18. "FLR2,Function 2 level reset" "No reset,Reset"
eventfld.long 0x00 17. "FLR1,Function 1 level reset" "No reset,Reset"
rbitfld.long 0x00 16. "RXR,Summary of detected interrupt for all receive rings belonging to the SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "MR2,Message 2 received from VSI 2" "Not received,Received"
newline
eventfld.long 0x00 1. "MR1,Message 1 received from VSI 1" "Not received,Received"
rbitfld.long 0x00 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI" "No interrupt,Interrupt"
group.long 0xA18++0x03
line.long 0x00 "SITXIDR,Station Interface Transmit Interrupt Detect Register"
eventfld.long 0x00 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "TXT9,Summary of detected threshold frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "TXT8,Summary of detected threshold frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "TXT7,Summary of detected threshold frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "TXT6,Summary of detected threshold frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "TXT5,Summary of detected threshold frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "TXT4,Summary of detected threshold frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "TXT3,Summary of detected threshold frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "TXT2,Summary of detected threshold frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "TXT1,Summary of detected threshold frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "TXT0,Summary of detected threshold frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA28++0x03
line.long 0x00 "SIRXIDR,Station Interface Receive Interrupt Detect Register"
eventfld.long 0x00 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA30++0x03
line.long 0x00 "SIMSIVR,Station Interface MSI-X Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat 16. (increment 0xB00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSITR$2VR,Station Interface MSI-X Transmit Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 16. (increment 0xB80 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSIRR$2VR,Station Interface MSI-X Receive Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
group.long 0xE20++0x07
line.long 0x00 "SIUEDR,Station Interface Uncorrectable Error Detect Register"
eventfld.long 0x00 19. "DROP_RING_SEL,Non-existing receive ring counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 18. "DROP_GRP_SEL,Non-existing receive group counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 17. "DROP_RING_EN,Station interface ring disabled drop counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 16. "DROP_SI_EN,Station interface disabled drop counted in SIUEFDCR" "No effect,Cleared"
newline
eventfld.long 0x00 0. "PE,Programming error" "No effect,Cleared"
line.long 0x04 "SIUERER,Station Interface Uncorrectable Error Report Enable Register"
bitfld.long 0x04 0. "PERE,Programming error report enable" "Disabled,Enabled"
rgroup.long 0xE28++0x03
line.long 0x00 "SIUEFDCR,Station Interface Uncorrectable Error Frame Drop Count Register"
rgroup.long 0xE30++0x03
line.long 0x00 "SIUMEDR,Station Interface Uncorrectable Memory Error Detect Register"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
bitfld.long 0x00 30. "M,Multiple" "Low,High"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE38++0x03
line.long 0x00 "SIUSBEDR,Station Interface Uncorrectable System Bus Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Not valid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "Low,High"
bitfld.long 0x00 29. "RD,Report disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
rgroup.long 0x1000++0x03
line.long 0x00 "SIMAFTCAPR,Station Interface MAC Address Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI"
rgroup.long 0x1100++0x03
line.long 0x00 "SIVFTCAPR,Station Interface VLAN Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI"
rgroup.long 0x1200++0x03
line.long 0x00 "SIRFSCAPR,Station Interface RFS Capability Register"
hexmask.long.word 0x00 0.--8. 0x01 "NUM_RFS,Number of receive flow steering entries available for use"
rgroup.long 0x1600++0x03
line.long 0x00 "SIRSSCAPR,Station Interface RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 16. (increment 0x00 0x200)(increment 0 1)
tree "BDR $2"
group.long ($1+0x8000)++0x07
line.long 0x00 "TB$2MR,Tx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable transmit buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 9. "VIH,VLAN insert hint" "Not inserted,Inserted"
bitfld.long 0x00 8. "CRC,User CRC provided" "Not provided,Provided"
bitfld.long 0x00 4.--6. "WRR,WRR weight" "1,2,3,4,5,6,7,8"
newline
bitfld.long 0x00 0.--2. "PRIO,Priority" "Lowest,1,2,3,4,5,6,Highest"
line.long 0x04 "TB$2SR,Tx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "BUSY,Transmit ring is busy" "Idle,Busy"
group.long ($1+0x8010)++0x13
line.long 0x00 "TB$2BAR0,Tx BDR $2 Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x04 "TB$2BAR1,Tx BDR $2 Base Address Register 1"
line.long 0x08 "TB$2PIR,Tx BDR $2 Producer Index Register"
hexmask.long.word 0x08 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
line.long 0x0C "TB$2CIR,Tx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 16.--31. 0x01 "STAT_ID,Status identifier"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring consumer index"
line.long 0x10 "TB$2LENR,Tx BDR $2 Length Register"
hexmask.long.tbyte 0x10 3.--16. 0x08 "LENGTH,BD ring length"
group.long ($1+0x80A0)++0x03
line.long 0x00 "TB$2IER,Tx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 1. "TXFIE,Transmit frame interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TXTIE,Transmit threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x80A4)++0x03
line.long 0x00 "TB$2IDR,Tx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 1. "TXF,Transmit of frame" "No transmit,Transmit"
bitfld.long 0x00 0. "TXT,Transmit threshold" "No threshold,Threshold"
group.long ($1+0x80A8)++0x07
line.long 0x00 "TB$2ICR0,Tx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "ICPT,Interrupt coalescing packet threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384"
line.long 0x04 "TB$2ICR1,Tx BDR $2 Interrupt Coalescing Register 1"
group.long ($1+0x8100)++0x1B
line.long 0x00 "RB$2MR,Rx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable receive buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 6. "VTPD,VLAN tag presentation disable" "No,Yes"
bitfld.long 0x00 5. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CM,Congestion mode" "Lossy,Lossless"
newline
bitfld.long 0x00 2. "BDS,BD size" "16B,32B"
bitfld.long 0x00 0. "AL,Header alignment" "Not added,Added"
line.long 0x04 "RB$2SR,Rx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "EMPTY,Ring is empty" "Not empty,Empty"
line.long 0x08 "RB$2BSR,Rx BDR $2 Buffer Size Register"
hexmask.long.word 0x08 0.--15. 0x01 "BSIZE,Buffer size"
line.long 0x0C "RB$2CIR,Rx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,receive buffer descriptor ring consumer index"
line.long 0x10 "RB$2BAR0,Rx BDR $2 Base Address Register 0"
hexmask.long 0x10 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x14 "RB$2BAR1,Rx BDR $2 Base Address Register 1"
line.long 0x18 "RB$2PIR,Rx BDR $2 Producer Index Register"
hexmask.long.word 0x18 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
group.long ($1+0x8120)++0x03
line.long 0x00 "RB$2LENR,Rx BDR $2 Length Register"
hexmask.long.tbyte 0x00 3.--16. 0x08 "LENGTH,BD ring length"
rgroup.long ($1+0x8180)++0x03
line.long 0x00 "RB$2DCR,Rx BDR $2 Drop Count Register"
group.long ($1+0x81A0)++0x03
line.long 0x00 "RB$2IER,Rx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 0. "RXTIE,Receive threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x81A4)++0x03
line.long 0x00 "RB$2IDR,Rx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 0. "RXT,Receive threshold" "No threshold,Threshold"
group.long ($1+0x81A8)++0x07
line.long 0x00 "RB$2ICR0,Rx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--8. 0x01 "ICPT,Interrupt coalescing packet threshold"
line.long 0x04 "RB$2ICR1,Rx BDR $2 Interrupt Coalescing Register 1"
tree.end
repeat.end
tree.end
tree "ENETC_P1_SI1"
base ad:0x1F8210000
group.long 0x00++0x03
line.long 0x00 "SIMR,Station Interface Mode Register"
bitfld.long 0x00 31. "EN,Enable station interface" "Disabled,Enabled"
bitfld.long 0x00 16. "DEFAULT_RX_GROUP,Default receive group" "0,1"
bitfld.long 0x00 4. "V2IPVE,VLAN to IPV mapping enable" "Disabled,Enabled"
bitfld.long 0x00 3. "RNBM,Receive no broad-cast mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "RNMM,Receive no multi-cast mode" "Disabled,Enabled"
bitfld.long 0x00 1. "RNUM,Receive no unicast-cast mode" "Disabled,Enabled"
bitfld.long 0x00 0. "RSEE,RSS classification enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "SISR,Station Interface Status Register"
bitfld.long 0x00 4. "VLAN_UTA,SI VLAN untagged frames accepted" "Not accepted,Accepted"
bitfld.long 0x00 3. "VLAN_P,SI VLAN promiscuous" "0,1"
bitfld.long 0x00 2. "MAC_MP,SI MAC multicast promiscuous" "0,1"
bitfld.long 0x00 1. "MAC_UP,SI MAC unicast promiscuous" "0,1"
newline
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
repeat 2. (increment 0x18 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SICTR$2,Station Interface Current Time Register $2"
repeat.end
rgroup.long 0x20++0x07
line.long 0x00 "SIPCAPR0,Station Interface Port Capability Register 0"
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating" "Not supported,Supported"
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload support" "Not supported,Supported"
line.long 0x04 "SIPCAPR1,Station Interface Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1k,2k,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multicast hash entries per SI" "64,128,256,512"
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1,2,3,4,5,6,7,8"
rgroup.long 0x30++0x03
line.long 0x00 "SITGTGR,Station Interface Time Gating Tick Granularity Register"
group.long 0x38++0x03
line.long 0x00 "SIRBGCR,Station Interface Receive BDR Group Control Register"
bitfld.long 0x00 16.--18. "RINGS_PER_GROUP,Number of rings per group" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 0.--1. "NUM_GROUPS,Number of groups used" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SICAR0,Station Interface Cache Attribute Register 0"
bitfld.long 0x00 30. "RDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "RDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "RDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "BD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "BD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "WRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "WRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "BD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "BD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x48++0x03
line.long 0x00 "SICAR2,Station Interface Cache Attribute Register 2"
bitfld.long 0x00 30. "CRDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "CRDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "CRDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "CBD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "CBD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "CBD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "CWRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "CWRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "CBD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "CBD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "CBD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x80++0x07
line.long 0x00 "SIPMAR0,Station Interface Primary MAC Address Register 0"
line.long 0x04 "SIPMAR1,Station Interface Primary MAC Address Register 1"
hexmask.long.word 0x04 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
repeat 2. (increment 0x90 0x04)(increment 1 1)
rgroup.long $1++0x03
line.long 0x00 "SICVLANR$2,Station Interface Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x100++0x07
line.long 0x00 "SIVLANIPVMR0,Station Interface VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
line.long 0x04 "SIVLANIPVMR1,Station Interface VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
group.long 0x150++0x03
line.long 0x00 "SIIPVBDRMR,Station Interface IPV To Ring Mapping Register"
bitfld.long 0x00 28.--30. "IPV7BDR,BD ring used within the group for IPV 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6BDR,BD ring used within the group for IPV 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "IPV5BDR,BD ring used within the group for IPV 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4BDR,BD ring used within the group for IPV 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3BDR,BD ring used within the group for IPV 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2BDR,BD ring used within the group for IPV 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "IPV1BDR,BD ring used within the group for IPV 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0BDR,BD ring used within the group for IPV 0" "0,1,2,3,4,5,6,7"
group.long 0x204++0x07
line.long 0x00 "VSIMSGSR,Virtual Station Interface Message Send Register"
hexmask.long.word 0x00 16.--31. 1. "MC,Message code"
bitfld.long 0x00 1. "MS,Message status" "Success,Fail"
bitfld.long 0x00 0. "MB,Message busy" "Idle,Busy"
line.long 0x04 "VSIMSGRR,Virtual Station Interface Message Receive Register"
hexmask.long.word 0x04 16.--31. 1. "MC,Message code"
bitfld.long 0x04 0. "MR,Message received" "Not received,Received"
group.long 0x210++0x07
line.long 0x00 "VSIMSGSNDAR0,Virtual Station Interface Message Send Register 0"
hexmask.long 0x00 6.--31. 0x40 "ADDRL,Message address low"
bitfld.long 0x00 0.--4. "MSIZE,Message size" "1024B,32B,64B,96B,128B,160B,192B,224B,256B,288B,320B,352B,384B,416B,448B,480B,512B,544B,576B,608B,640B,672B,704B,736B,768B,800B,832B,864B,896B,928B,960B,992B"
line.long 0x04 "VSIMSGSNDAR1,Virtual Station Interface Message Send Register 1"
repeat 2. (increment 0x300 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIROCT$2,Station Interface Receive Octets Counter $2"
repeat.end
repeat 2. (increment 0x308 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRFRM$2,Station Interface Receive Frame Counter $2"
repeat.end
repeat 2. (increment 0x310 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRUCA$2,Station Interface Receive Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x318 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRMCA$2,Station Interface Receive Multicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x320 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITOCT$2,Station Interface Transmit Octets Counter $2"
repeat.end
repeat 2. (increment 0x328 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITFRM$2,Station Interface Transmit Frame Counter $2"
repeat.end
repeat 2. (increment 0x330 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITUCA$2,Station Interface Transmit Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x338 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITMCA$2,Station Interface Transmit Multicast Frame Counter $2"
repeat.end
group.long 0x800++0x03
line.long 0x00 "SICBDRMR,Station Interface Control BDR Mode Register"
bitfld.long 0x00 31. "EN,Enable control buffer descriptor ring" "Disabled,Enabled"
rgroup.long 0x804++0x03
line.long 0x00 "SICBDRSR,Station Interface Control BDR Status Register"
bitfld.long 0x00 0. "BUSY,Busy" "Idle,Busy"
group.long 0x810++0x13
line.long 0x00 "SICBDRBAR0,Station Interface Control BDR Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits"
line.long 0x04 "SICBDRBAR1,Station Interface Control BDR Base Address Register 1"
line.long 0x08 "SICBDRPIR,Station Interface Control BDR Producer Index Register"
hexmask.long.word 0x08 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring producer index"
line.long 0x0C "SICBDRCIR,Station Interface Control BDR Consumer Index Register"
hexmask.long.word 0x0C 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring consumer index"
line.long 0x10 "SICBDRLENR,Station Interface Control BDR Length Register"
hexmask.long.word 0x10 3.--10. 0x08 "LENGTH,BD ring length"
group.long 0x8A4++0x03
line.long 0x00 "SICBDREDR,Station Interface Control BDR Event Detect Register"
eventfld.long 0x00 0. "CBDC,Control BD completed" "Not completed,Completed"
rgroup.long 0x900++0x0B
line.long 0x00 "SICAPR0,Station Interface Capability Register 0"
bitfld.long 0x00 28.--29. "NUM_MAC_ADR,Number of MAC address" "1,2,3,4"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
line.long 0x04 "SICAPR1,Station Interface Capability Register 1"
hexmask.long.byte 0x04 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI"
line.long 0x08 "SICAPR2,Station Interface Capability Register 2"
bitfld.long 0x08 3. "VTP[3],VLAN types permitted bit 3 [Standard C-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 2. "VTP[2],VLAN types permitted bit 2 [Standard S-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 1. "VTP[1],VLAN types permitted bit 1 [VLAN defined by PCVLANR1]" "Not permitted,Permitted"
bitfld.long 0x08 0. "VTP[0],VLAN types permitted bit 0 [VLAN defined by PCVLANR2]" "Not permitted,Permitted"
group.long 0xA00++0x03
line.long 0x00 "VSIIER,Virtual Station Interface Interrupt Enable Register"
bitfld.long 0x00 9. "MRIE,Message received interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "MSIE,Message sent interrupt enable" "Disabled,Enabled"
group.long 0xA08++0x03
line.long 0x00 "VSIIDR,Virtual Station Interface Interrupt Detect Register"
rbitfld.long 0x00 16. "RXR,Summary of detected interrupt for all receive rings belonging to the SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "MR,Message received" "Not received,Received"
newline
eventfld.long 0x00 8. "MS,Message sent" "Not sent,Sent"
rbitfld.long 0x00 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI" "No interrupt,Interrupt"
group.long 0xA18++0x03
line.long 0x00 "SITXIDR,Station Interface Transmit Interrupt Detect Register"
eventfld.long 0x00 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "TXT9,Summary of detected threshold frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "TXT8,Summary of detected threshold frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "TXT7,Summary of detected threshold frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "TXT6,Summary of detected threshold frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "TXT5,Summary of detected threshold frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "TXT4,Summary of detected threshold frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "TXT3,Summary of detected threshold frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "TXT2,Summary of detected threshold frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "TXT1,Summary of detected threshold frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "TXT0,Summary of detected threshold frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA28++0x03
line.long 0x00 "SIRXIDR,Station Interface Receive Interrupt Detect Register"
eventfld.long 0x00 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA30++0x03
line.long 0x00 "SIMSIVR,Station Interface MSI-X Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat 16. (increment 0xB00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSITR$2VR,Station Interface MSI-X Transmit Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 16. (increment 0xB80 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSIRR$2VR,Station Interface MSI-X Receive Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
group.long 0xE20++0x07
line.long 0x00 "SIUEDR,Station Interface Uncorrectable Error Detect Register"
eventfld.long 0x00 19. "DROP_RING_SEL,Non-existing receive ring counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 18. "DROP_GRP_SEL,Non-existing receive group counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 17. "DROP_RING_EN,Station interface ring disabled drop counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 16. "DROP_SI_EN,Station interface disabled drop counted in SIUEFDCR" "No effect,Cleared"
newline
eventfld.long 0x00 0. "PE,Programming error" "No effect,Cleared"
line.long 0x04 "SIUERER,Station Interface Uncorrectable Error Report Enable Register"
bitfld.long 0x04 0. "PERE,Programming error report enable" "Disabled,Enabled"
rgroup.long 0xE28++0x03
line.long 0x00 "SIUEFDCR,Station Interface Uncorrectable Error Frame Drop Count Register"
rgroup.long 0xE30++0x03
line.long 0x00 "SIUMEDR,Station Interface Uncorrectable Memory Error Detect Register"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
bitfld.long 0x00 30. "M,Multiple" "Low,High"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE38++0x03
line.long 0x00 "SIUSBEDR,Station Interface Uncorrectable System Bus Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Not valid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "Low,High"
bitfld.long 0x00 29. "RD,Report disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
rgroup.long 0x1000++0x03
line.long 0x00 "SIMAFTCAPR,Station Interface MAC Address Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI"
rgroup.long 0x1100++0x03
line.long 0x00 "SIVFTCAPR,Station Interface VLAN Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI"
rgroup.long 0x1200++0x03
line.long 0x00 "SIRFSCAPR,Station Interface RFS Capability Register"
hexmask.long.word 0x00 0.--8. 0x01 "NUM_RFS,Number of receive flow steering entries available for use"
rgroup.long 0x1600++0x03
line.long 0x00 "SIRSSCAPR,Station Interface RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 16. (increment 0x00 0x200)(increment 0 1)
tree "BDR $2"
group.long ($1+0x8000)++0x07
line.long 0x00 "TB$2MR,Tx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable transmit buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 9. "VIH,VLAN insert hint" "Not inserted,Inserted"
bitfld.long 0x00 8. "CRC,User CRC provided" "Not provided,Provided"
bitfld.long 0x00 4.--6. "WRR,WRR weight" "1,2,3,4,5,6,7,8"
newline
bitfld.long 0x00 0.--2. "PRIO,Priority" "Lowest,1,2,3,4,5,6,Highest"
line.long 0x04 "TB$2SR,Tx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "BUSY,Transmit ring is busy" "Idle,Busy"
group.long ($1+0x8010)++0x13
line.long 0x00 "TB$2BAR0,Tx BDR $2 Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x04 "TB$2BAR1,Tx BDR $2 Base Address Register 1"
line.long 0x08 "TB$2PIR,Tx BDR $2 Producer Index Register"
hexmask.long.word 0x08 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
line.long 0x0C "TB$2CIR,Tx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 16.--31. 0x01 "STAT_ID,Status identifier"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring consumer index"
line.long 0x10 "TB$2LENR,Tx BDR $2 Length Register"
hexmask.long.tbyte 0x10 3.--16. 0x08 "LENGTH,BD ring length"
group.long ($1+0x80A0)++0x03
line.long 0x00 "TB$2IER,Tx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 1. "TXFIE,Transmit frame interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TXTIE,Transmit threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x80A4)++0x03
line.long 0x00 "TB$2IDR,Tx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 1. "TXF,Transmit of frame" "No transmit,Transmit"
bitfld.long 0x00 0. "TXT,Transmit threshold" "No threshold,Threshold"
group.long ($1+0x80A8)++0x07
line.long 0x00 "TB$2ICR0,Tx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "ICPT,Interrupt coalescing packet threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384"
line.long 0x04 "TB$2ICR1,Tx BDR $2 Interrupt Coalescing Register 1"
group.long ($1+0x8100)++0x1B
line.long 0x00 "RB$2MR,Rx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable receive buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 6. "VTPD,VLAN tag presentation disable" "No,Yes"
bitfld.long 0x00 5. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CM,Congestion mode" "Lossy,Lossless"
newline
bitfld.long 0x00 2. "BDS,BD size" "16B,32B"
bitfld.long 0x00 0. "AL,Header alignment" "Not added,Added"
line.long 0x04 "RB$2SR,Rx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "EMPTY,Ring is empty" "Not empty,Empty"
line.long 0x08 "RB$2BSR,Rx BDR $2 Buffer Size Register"
hexmask.long.word 0x08 0.--15. 0x01 "BSIZE,Buffer size"
line.long 0x0C "RB$2CIR,Rx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,receive buffer descriptor ring consumer index"
line.long 0x10 "RB$2BAR0,Rx BDR $2 Base Address Register 0"
hexmask.long 0x10 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x14 "RB$2BAR1,Rx BDR $2 Base Address Register 1"
line.long 0x18 "RB$2PIR,Rx BDR $2 Producer Index Register"
hexmask.long.word 0x18 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
group.long ($1+0x8120)++0x03
line.long 0x00 "RB$2LENR,Rx BDR $2 Length Register"
hexmask.long.tbyte 0x00 3.--16. 0x08 "LENGTH,BD ring length"
rgroup.long ($1+0x8180)++0x03
line.long 0x00 "RB$2DCR,Rx BDR $2 Drop Count Register"
group.long ($1+0x81A0)++0x03
line.long 0x00 "RB$2IER,Rx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 0. "RXTIE,Receive threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x81A4)++0x03
line.long 0x00 "RB$2IDR,Rx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 0. "RXT,Receive threshold" "No threshold,Threshold"
group.long ($1+0x81A8)++0x07
line.long 0x00 "RB$2ICR0,Rx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--8. 0x01 "ICPT,Interrupt coalescing packet threshold"
line.long 0x04 "RB$2ICR1,Rx BDR $2 Interrupt Coalescing Register 1"
tree.end
repeat.end
tree.end
tree "ENETC_P1_SI2"
base ad:0x1F8220000
group.long 0x00++0x03
line.long 0x00 "SIMR,Station Interface Mode Register"
bitfld.long 0x00 31. "EN,Enable station interface" "Disabled,Enabled"
bitfld.long 0x00 16. "DEFAULT_RX_GROUP,Default receive group" "0,1"
bitfld.long 0x00 4. "V2IPVE,VLAN to IPV mapping enable" "Disabled,Enabled"
bitfld.long 0x00 3. "RNBM,Receive no broad-cast mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "RNMM,Receive no multi-cast mode" "Disabled,Enabled"
bitfld.long 0x00 1. "RNUM,Receive no unicast-cast mode" "Disabled,Enabled"
bitfld.long 0x00 0. "RSEE,RSS classification enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "SISR,Station Interface Status Register"
bitfld.long 0x00 4. "VLAN_UTA,SI VLAN untagged frames accepted" "Not accepted,Accepted"
bitfld.long 0x00 3. "VLAN_P,SI VLAN promiscuous" "0,1"
bitfld.long 0x00 2. "MAC_MP,SI MAC multicast promiscuous" "0,1"
bitfld.long 0x00 1. "MAC_UP,SI MAC unicast promiscuous" "0,1"
newline
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
repeat 2. (increment 0x18 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SICTR$2,Station Interface Current Time Register $2"
repeat.end
rgroup.long 0x20++0x07
line.long 0x00 "SIPCAPR0,Station Interface Port Capability Register 0"
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating" "Not supported,Supported"
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload support" "Not supported,Supported"
line.long 0x04 "SIPCAPR1,Station Interface Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1k,2k,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multicast hash entries per SI" "64,128,256,512"
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1,2,3,4,5,6,7,8"
rgroup.long 0x30++0x03
line.long 0x00 "SITGTGR,Station Interface Time Gating Tick Granularity Register"
group.long 0x38++0x03
line.long 0x00 "SIRBGCR,Station Interface Receive BDR Group Control Register"
bitfld.long 0x00 16.--18. "RINGS_PER_GROUP,Number of rings per group" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 0.--1. "NUM_GROUPS,Number of groups used" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SICAR0,Station Interface Cache Attribute Register 0"
bitfld.long 0x00 30. "RDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "RDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "RDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "BD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "BD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "WRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "WRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "BD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "BD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x48++0x03
line.long 0x00 "SICAR2,Station Interface Cache Attribute Register 2"
bitfld.long 0x00 30. "CRDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "CRDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "CRDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "CBD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "CBD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "CBD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "CWRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "CWRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "CBD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "CBD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "CBD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x80++0x07
line.long 0x00 "SIPMAR0,Station Interface Primary MAC Address Register 0"
line.long 0x04 "SIPMAR1,Station Interface Primary MAC Address Register 1"
hexmask.long.word 0x04 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
repeat 2. (increment 0x90 0x04)(increment 1 1)
rgroup.long $1++0x03
line.long 0x00 "SICVLANR$2,Station Interface Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x100++0x07
line.long 0x00 "SIVLANIPVMR0,Station Interface VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
line.long 0x04 "SIVLANIPVMR1,Station Interface VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
group.long 0x150++0x03
line.long 0x00 "SIIPVBDRMR,Station Interface IPV To Ring Mapping Register"
bitfld.long 0x00 28.--30. "IPV7BDR,BD ring used within the group for IPV 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6BDR,BD ring used within the group for IPV 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "IPV5BDR,BD ring used within the group for IPV 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4BDR,BD ring used within the group for IPV 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3BDR,BD ring used within the group for IPV 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2BDR,BD ring used within the group for IPV 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "IPV1BDR,BD ring used within the group for IPV 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0BDR,BD ring used within the group for IPV 0" "0,1,2,3,4,5,6,7"
group.long 0x204++0x07
line.long 0x00 "VSIMSGSR,Virtual Station Interface Message Send Register"
hexmask.long.word 0x00 16.--31. 1. "MC,Message code"
bitfld.long 0x00 1. "MS,Message status" "Success,Fail"
bitfld.long 0x00 0. "MB,Message busy" "Idle,Busy"
line.long 0x04 "VSIMSGRR,Virtual Station Interface Message Receive Register"
hexmask.long.word 0x04 16.--31. 1. "MC,Message code"
bitfld.long 0x04 0. "MR,Message received" "Not received,Received"
group.long 0x210++0x07
line.long 0x00 "VSIMSGSNDAR0,Virtual Station Interface Message Send Register 0"
hexmask.long 0x00 6.--31. 0x40 "ADDRL,Message address low"
bitfld.long 0x00 0.--4. "MSIZE,Message size" "1024B,32B,64B,96B,128B,160B,192B,224B,256B,288B,320B,352B,384B,416B,448B,480B,512B,544B,576B,608B,640B,672B,704B,736B,768B,800B,832B,864B,896B,928B,960B,992B"
line.long 0x04 "VSIMSGSNDAR1,Virtual Station Interface Message Send Register 1"
repeat 2. (increment 0x300 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIROCT$2,Station Interface Receive Octets Counter $2"
repeat.end
repeat 2. (increment 0x308 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRFRM$2,Station Interface Receive Frame Counter $2"
repeat.end
repeat 2. (increment 0x310 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRUCA$2,Station Interface Receive Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x318 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRMCA$2,Station Interface Receive Multicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x320 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITOCT$2,Station Interface Transmit Octets Counter $2"
repeat.end
repeat 2. (increment 0x328 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITFRM$2,Station Interface Transmit Frame Counter $2"
repeat.end
repeat 2. (increment 0x330 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITUCA$2,Station Interface Transmit Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x338 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITMCA$2,Station Interface Transmit Multicast Frame Counter $2"
repeat.end
group.long 0x800++0x03
line.long 0x00 "SICBDRMR,Station Interface Control BDR Mode Register"
bitfld.long 0x00 31. "EN,Enable control buffer descriptor ring" "Disabled,Enabled"
rgroup.long 0x804++0x03
line.long 0x00 "SICBDRSR,Station Interface Control BDR Status Register"
bitfld.long 0x00 0. "BUSY,Busy" "Idle,Busy"
group.long 0x810++0x13
line.long 0x00 "SICBDRBAR0,Station Interface Control BDR Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits"
line.long 0x04 "SICBDRBAR1,Station Interface Control BDR Base Address Register 1"
line.long 0x08 "SICBDRPIR,Station Interface Control BDR Producer Index Register"
hexmask.long.word 0x08 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring producer index"
line.long 0x0C "SICBDRCIR,Station Interface Control BDR Consumer Index Register"
hexmask.long.word 0x0C 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring consumer index"
line.long 0x10 "SICBDRLENR,Station Interface Control BDR Length Register"
hexmask.long.word 0x10 3.--10. 0x08 "LENGTH,BD ring length"
group.long 0x8A4++0x03
line.long 0x00 "SICBDREDR,Station Interface Control BDR Event Detect Register"
eventfld.long 0x00 0. "CBDC,Control BD completed" "Not completed,Completed"
rgroup.long 0x900++0x0B
line.long 0x00 "SICAPR0,Station Interface Capability Register 0"
bitfld.long 0x00 28.--29. "NUM_MAC_ADR,Number of MAC address" "1,2,3,4"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
line.long 0x04 "SICAPR1,Station Interface Capability Register 1"
hexmask.long.byte 0x04 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI"
line.long 0x08 "SICAPR2,Station Interface Capability Register 2"
bitfld.long 0x08 3. "VTP[3],VLAN types permitted bit 3 [Standard C-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 2. "VTP[2],VLAN types permitted bit 2 [Standard S-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 1. "VTP[1],VLAN types permitted bit 1 [VLAN defined by PCVLANR1]" "Not permitted,Permitted"
bitfld.long 0x08 0. "VTP[0],VLAN types permitted bit 0 [VLAN defined by PCVLANR2]" "Not permitted,Permitted"
group.long 0xA00++0x03
line.long 0x00 "VSIIER,Virtual Station Interface Interrupt Enable Register"
bitfld.long 0x00 9. "MRIE,Message received interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "MSIE,Message sent interrupt enable" "Disabled,Enabled"
group.long 0xA08++0x03
line.long 0x00 "VSIIDR,Virtual Station Interface Interrupt Detect Register"
rbitfld.long 0x00 16. "RXR,Summary of detected interrupt for all receive rings belonging to the SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "MR,Message received" "Not received,Received"
newline
eventfld.long 0x00 8. "MS,Message sent" "Not sent,Sent"
rbitfld.long 0x00 0. "TXR,Summary of detected interrupts for all transmit rings belonging to the SI" "No interrupt,Interrupt"
group.long 0xA18++0x03
line.long 0x00 "SITXIDR,Station Interface Transmit Interrupt Detect Register"
eventfld.long 0x00 31. "TXF15,Summary of detected transmit frame interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 30. "TXF14,Summary of detected transmit frame interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 29. "TXF13,Summary of detected transmit frame interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 28. "TXF12,Summary of detected transmit frame interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 27. "TXF11,Summary of detected transmit frame interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 26. "TXF10,Summary of detected transmit frame interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 25. "TXF9,Summary of detected transmit frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 24. "TXF8,Summary of detected transmit frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 15. "TXT15,Summary of detected threshold interrupts for transmit ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "TXT14,Summary of detected threshold interrupts for transmit ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "TXT13,Summary of detected threshold interrupts for transmit ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "TXT12,Summary of detected threshold interrupts for transmit ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "TXT11,Summary of detected threshold interrupts for transmit ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "TXT10,Summary of detected threshold interrupts for transmit ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "TXT9,Summary of detected threshold frame interrupts for transmit ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "TXT8,Summary of detected threshold frame interrupts for transmit ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "TXT7,Summary of detected threshold frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "TXT6,Summary of detected threshold frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "TXT5,Summary of detected threshold frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "TXT4,Summary of detected threshold frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "TXT3,Summary of detected threshold frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "TXT2,Summary of detected threshold frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "TXT1,Summary of detected threshold frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "TXT0,Summary of detected threshold frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA28++0x03
line.long 0x00 "SIRXIDR,Station Interface Receive Interrupt Detect Register"
eventfld.long 0x00 15. "RX15,Summary of detected interrupts for receive ring 15 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 14. "RX14,Summary of detected interrupts for receive ring 14 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 13. "RX13,Summary of detected interrupts for receive ring 13 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 12. "RX12,Summary of detected interrupts for receive ring 12 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 11. "RX11,Summary of detected interrupts for receive ring 11 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 10. "RX10,Summary of detected interrupts for receive ring 10 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 9. "RX9,Summary of detected interrupts for receive ring 9 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 8. "RX8,Summary of detected interrupts for receive ring 8 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA30++0x03
line.long 0x00 "SIMSIVR,Station Interface MSI-X Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat 16. (increment 0xB00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSITR$2VR,Station Interface MSI-X Transmit Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 16. (increment 0xB80 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSIRR$2VR,Station Interface MSI-X Receive Ring A Vector Register"
bitfld.long 0x00 0.--4. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
group.long 0xE20++0x07
line.long 0x00 "SIUEDR,Station Interface Uncorrectable Error Detect Register"
eventfld.long 0x00 19. "DROP_RING_SEL,Non-existing receive ring counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 18. "DROP_GRP_SEL,Non-existing receive group counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 17. "DROP_RING_EN,Station interface ring disabled drop counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 16. "DROP_SI_EN,Station interface disabled drop counted in SIUEFDCR" "No effect,Cleared"
newline
eventfld.long 0x00 0. "PE,Programming error" "No effect,Cleared"
line.long 0x04 "SIUERER,Station Interface Uncorrectable Error Report Enable Register"
bitfld.long 0x04 0. "PERE,Programming error report enable" "Disabled,Enabled"
rgroup.long 0xE28++0x03
line.long 0x00 "SIUEFDCR,Station Interface Uncorrectable Error Frame Drop Count Register"
rgroup.long 0xE30++0x03
line.long 0x00 "SIUMEDR,Station Interface Uncorrectable Memory Error Detect Register"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
bitfld.long 0x00 30. "M,Multiple" "Low,High"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE38++0x03
line.long 0x00 "SIUSBEDR,Station Interface Uncorrectable System Bus Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Not valid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "Low,High"
bitfld.long 0x00 29. "RD,Report disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
rgroup.long 0x1000++0x03
line.long 0x00 "SIMAFTCAPR,Station Interface MAC Address Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI"
rgroup.long 0x1100++0x03
line.long 0x00 "SIVFTCAPR,Station Interface VLAN Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI"
rgroup.long 0x1200++0x03
line.long 0x00 "SIRFSCAPR,Station Interface RFS Capability Register"
hexmask.long.word 0x00 0.--8. 0x01 "NUM_RFS,Number of receive flow steering entries available for use"
rgroup.long 0x1600++0x03
line.long 0x00 "SIRSSCAPR,Station Interface RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 16. (increment 0x00 0x200)(increment 0 1)
tree "BDR $2"
group.long ($1+0x8000)++0x07
line.long 0x00 "TB$2MR,Tx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable transmit buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 9. "VIH,VLAN insert hint" "Not inserted,Inserted"
bitfld.long 0x00 8. "CRC,User CRC provided" "Not provided,Provided"
bitfld.long 0x00 4.--6. "WRR,WRR weight" "1,2,3,4,5,6,7,8"
newline
bitfld.long 0x00 0.--2. "PRIO,Priority" "Lowest,1,2,3,4,5,6,Highest"
line.long 0x04 "TB$2SR,Tx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "BUSY,Transmit ring is busy" "Idle,Busy"
group.long ($1+0x8010)++0x13
line.long 0x00 "TB$2BAR0,Tx BDR $2 Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x04 "TB$2BAR1,Tx BDR $2 Base Address Register 1"
line.long 0x08 "TB$2PIR,Tx BDR $2 Producer Index Register"
hexmask.long.word 0x08 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
line.long 0x0C "TB$2CIR,Tx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 16.--31. 0x01 "STAT_ID,Status identifier"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring consumer index"
line.long 0x10 "TB$2LENR,Tx BDR $2 Length Register"
hexmask.long.tbyte 0x10 3.--16. 0x08 "LENGTH,BD ring length"
group.long ($1+0x80A0)++0x03
line.long 0x00 "TB$2IER,Tx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 1. "TXFIE,Transmit frame interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TXTIE,Transmit threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x80A4)++0x03
line.long 0x00 "TB$2IDR,Tx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 1. "TXF,Transmit of frame" "No transmit,Transmit"
bitfld.long 0x00 0. "TXT,Transmit threshold" "No threshold,Threshold"
group.long ($1+0x80A8)++0x07
line.long 0x00 "TB$2ICR0,Tx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "ICPT,Interrupt coalescing packet threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384"
line.long 0x04 "TB$2ICR1,Tx BDR $2 Interrupt Coalescing Register 1"
group.long ($1+0x8100)++0x1B
line.long 0x00 "RB$2MR,Rx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable receive buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 6. "VTPD,VLAN tag presentation disable" "No,Yes"
bitfld.long 0x00 5. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CM,Congestion mode" "Lossy,Lossless"
newline
bitfld.long 0x00 2. "BDS,BD size" "16B,32B"
bitfld.long 0x00 0. "AL,Header alignment" "Not added,Added"
line.long 0x04 "RB$2SR,Rx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "EMPTY,Ring is empty" "Not empty,Empty"
line.long 0x08 "RB$2BSR,Rx BDR $2 Buffer Size Register"
hexmask.long.word 0x08 0.--15. 0x01 "BSIZE,Buffer size"
line.long 0x0C "RB$2CIR,Rx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,receive buffer descriptor ring consumer index"
line.long 0x10 "RB$2BAR0,Rx BDR $2 Base Address Register 0"
hexmask.long 0x10 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x14 "RB$2BAR1,Rx BDR $2 Base Address Register 1"
line.long 0x18 "RB$2PIR,Rx BDR $2 Producer Index Register"
hexmask.long.word 0x18 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
group.long ($1+0x8120)++0x03
line.long 0x00 "RB$2LENR,Rx BDR $2 Length Register"
hexmask.long.tbyte 0x00 3.--16. 0x08 "LENGTH,BD ring length"
rgroup.long ($1+0x8180)++0x03
line.long 0x00 "RB$2DCR,Rx BDR $2 Drop Count Register"
group.long ($1+0x81A0)++0x03
line.long 0x00 "RB$2IER,Rx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 0. "RXTIE,Receive threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x81A4)++0x03
line.long 0x00 "RB$2IDR,Rx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 0. "RXT,Receive threshold" "No threshold,Threshold"
group.long ($1+0x81A8)++0x07
line.long 0x00 "RB$2ICR0,Rx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--8. 0x01 "ICPT,Interrupt coalescing packet threshold"
line.long 0x04 "RB$2ICR1,Rx BDR $2 Interrupt Coalescing Register 1"
tree.end
repeat.end
tree.end
tree "ENETC_P2_SI0"
base ad:0x1F8080000
group.long 0x00++0x03
line.long 0x00 "SIMR,Station Interface Mode Register"
bitfld.long 0x00 31. "EN,Enable station interface" "Disabled,Enabled"
bitfld.long 0x00 16. "DEFAULT_RX_GROUP,Default receive group" "0,1"
bitfld.long 0x00 4. "V2IPVE,VLAN to IPV mapping enable" "Disabled,Enabled"
bitfld.long 0x00 3. "RNBM,Receive no broad-cast mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "RNMM,Receive no multi-cast mode" "Disabled,Enabled"
bitfld.long 0x00 1. "RNUM,Receive no unicast-cast mode" "Disabled,Enabled"
bitfld.long 0x00 0. "RSEE,RSS classification enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "SISR,Station Interface Status Register"
bitfld.long 0x00 4. "VLAN_UTA,SI VLAN untagged frames accepted" "Not accepted,Accepted"
bitfld.long 0x00 3. "VLAN_P,SI VLAN promiscuous" "0,1"
bitfld.long 0x00 2. "MAC_MP,SI MAC multicast promiscuous" "0,1"
bitfld.long 0x00 1. "MAC_UP,SI MAC unicast promiscuous" "0,1"
newline
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
repeat 2. (increment 0x18 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SICTR$2,Station Interface Current Time Register $2"
repeat.end
rgroup.long 0x20++0x07
line.long 0x00 "SIPCAPR0,Station Interface Port Capability Register 0"
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating" "Not supported,Supported"
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload support" "Not supported,Supported"
line.long 0x04 "SIPCAPR1,Station Interface Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1k,2k,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multicast hash entries per SI" "64,128,256,512"
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1,2,3,4,5,6,7,8"
rgroup.long 0x30++0x03
line.long 0x00 "SITGTGR,Station Interface Time Gating Tick Granularity Register"
group.long 0x38++0x03
line.long 0x00 "SIRBGCR,Station Interface Receive BDR Group Control Register"
bitfld.long 0x00 16.--18. "RINGS_PER_GROUP,Number of rings per group" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 0.--1. "NUM_GROUPS,Number of groups used" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SICAR0,Station Interface Cache Attribute Register 0"
bitfld.long 0x00 30. "RDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "RDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "RDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "BD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "BD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "WRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "WRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "BD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "BD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x48++0x03
line.long 0x00 "SICAR2,Station Interface Cache Attribute Register 2"
bitfld.long 0x00 30. "CRDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "CRDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "CRDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "CBD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "CBD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "CBD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "CWRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "CWRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "CBD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "CBD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "CBD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x80++0x07
line.long 0x00 "SIPMAR0,Station Interface Primary MAC Address Register 0"
line.long 0x04 "SIPMAR1,Station Interface Primary MAC Address Register 1"
hexmask.long.word 0x04 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
repeat 2. (increment 0x90 0x04)(increment 1 1)
rgroup.long $1++0x03
line.long 0x00 "SICVLANR$2,Station Interface Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x100++0x07
line.long 0x00 "SIVLANIPVMR0,Station Interface VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
line.long 0x04 "SIVLANIPVMR1,Station Interface VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
group.long 0x150++0x03
line.long 0x00 "SIIPVBDRMR,Station Interface IPV To Ring Mapping Register"
bitfld.long 0x00 28.--30. "IPV7BDR,BD ring used within the group for IPV 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6BDR,BD ring used within the group for IPV 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "IPV5BDR,BD ring used within the group for IPV 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4BDR,BD ring used within the group for IPV 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3BDR,BD ring used within the group for IPV 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2BDR,BD ring used within the group for IPV 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "IPV1BDR,BD ring used within the group for IPV 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0BDR,BD ring used within the group for IPV 0" "0,1,2,3,4,5,6,7"
repeat 2. (increment 0x300 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIROCT$2,Station Interface Receive Octets Counter $2"
repeat.end
repeat 2. (increment 0x308 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRFRM$2,Station Interface Receive Frame Counter $2"
repeat.end
repeat 2. (increment 0x310 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRUCA$2,Station Interface Receive Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x318 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRMCA$2,Station Interface Receive Multicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x320 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITOCT$2,Station Interface Transmit Octets Counter $2"
repeat.end
repeat 2. (increment 0x328 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITFRM$2,Station Interface Transmit Frame Counter $2"
repeat.end
repeat 2. (increment 0x330 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITUCA$2,Station Interface Transmit Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x338 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITMCA$2,Station Interface Transmit Multicast Frame Counter $2"
repeat.end
group.long 0x800++0x03
line.long 0x00 "SICBDRMR,Station Interface Control BDR Mode Register"
bitfld.long 0x00 31. "EN,Enable control buffer descriptor ring" "Disabled,Enabled"
rgroup.long 0x804++0x03
line.long 0x00 "SICBDRSR,Station Interface Control BDR Status Register"
bitfld.long 0x00 0. "BUSY,Busy" "Idle,Busy"
group.long 0x810++0x13
line.long 0x00 "SICBDRBAR0,Station Interface Control BDR Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits"
line.long 0x04 "SICBDRBAR1,Station Interface Control BDR Base Address Register 1"
line.long 0x08 "SICBDRPIR,Station Interface Control BDR Producer Index Register"
hexmask.long.word 0x08 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring producer index"
line.long 0x0C "SICBDRCIR,Station Interface Control BDR Consumer Index Register"
hexmask.long.word 0x0C 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring consumer index"
line.long 0x10 "SICBDRLENR,Station Interface Control BDR Length Register"
hexmask.long.word 0x10 3.--10. 0x08 "LENGTH,BD ring length"
group.long 0x8A4++0x03
line.long 0x00 "SICBDREDR,Station Interface Control BDR Event Detect Register"
eventfld.long 0x00 0. "CBDC,Control BD completed" "Not completed,Completed"
rgroup.long 0x900++0x0B
line.long 0x00 "SICAPR0,Station Interface Capability Register 0"
bitfld.long 0x00 28.--29. "NUM_MAC_ADR,Number of MAC address" "1,2,3,4"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
line.long 0x04 "SICAPR1,Station Interface Capability Register 1"
hexmask.long.byte 0x04 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI"
line.long 0x08 "SICAPR2,Station Interface Capability Register 2"
bitfld.long 0x08 3. "VTP[3],VLAN types permitted bit 3 [Standard C-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 2. "VTP[2],VLAN types permitted bit 2 [Standard S-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 1. "VTP[1],VLAN types permitted bit 1 [VLAN defined by PCVLANR1]" "Not permitted,Permitted"
bitfld.long 0x08 0. "VTP[0],VLAN types permitted bit 0 [VLAN defined by PCVLANR2]" "Not permitted,Permitted"
group.long 0xA18++0x03
line.long 0x00 "SITXIDR,Station Interface Transmit Interrupt Detect Register"
eventfld.long 0x00 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "TXT7,Summary of detected threshold frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "TXT6,Summary of detected threshold frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "TXT5,Summary of detected threshold frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "TXT4,Summary of detected threshold frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "TXT3,Summary of detected threshold frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "TXT2,Summary of detected threshold frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "TXT1,Summary of detected threshold frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "TXT0,Summary of detected threshold frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA28++0x03
line.long 0x00 "SIRXIDR,Station Interface Receive Interrupt Detect Register"
eventfld.long 0x00 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA30++0x03
line.long 0x00 "SIMSIVR,Station Interface MSI-X Vector Register"
bitfld.long 0x00 0.--3. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat 8. (increment 0xB00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSITR$2VR,Station Interface MSI-X Transmit Ring A Vector Register"
bitfld.long 0x00 0.--3. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 8. (increment 0xB80 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSIRR$2VR,Station Interface MSI-X Receive Ring A Vector Register"
bitfld.long 0x00 0.--3. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0xE20++0x07
line.long 0x00 "SIUEDR,Station Interface Uncorrectable Error Detect Register"
eventfld.long 0x00 19. "DROP_RING_SEL,Non-existing receive ring counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 18. "DROP_GRP_SEL,Non-existing receive group counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 17. "DROP_RING_EN,Station interface ring disabled drop counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 16. "DROP_SI_EN,Station interface disabled drop counted in SIUEFDCR" "No effect,Cleared"
newline
eventfld.long 0x00 0. "PE,Programming error" "No effect,Cleared"
line.long 0x04 "SIUERER,Station Interface Uncorrectable Error Report Enable Register"
bitfld.long 0x04 0. "PERE,Programming error report enable" "Disabled,Enabled"
rgroup.long 0xE28++0x03
line.long 0x00 "SIUEFDCR,Station Interface Uncorrectable Error Frame Drop Count Register"
rgroup.long 0xE30++0x03
line.long 0x00 "SIUMEDR,Station Interface Uncorrectable Memory Error Detect Register"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
bitfld.long 0x00 30. "M,Multiple" "Low,High"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE38++0x03
line.long 0x00 "SIUSBEDR,Station Interface Uncorrectable System Bus Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Not valid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "Low,High"
bitfld.long 0x00 29. "RD,Report disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
rgroup.long 0x1000++0x03
line.long 0x00 "SIMAFTCAPR,Station Interface MAC Address Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI"
rgroup.long 0x1100++0x03
line.long 0x00 "SIVFTCAPR,Station Interface VLAN Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI"
rgroup.long 0x1200++0x03
line.long 0x00 "SIRFSCAPR,Station Interface RFS Capability Register"
hexmask.long.word 0x00 0.--8. 0x01 "NUM_RFS,Number of receive flow steering entries available for use"
rgroup.long 0x1600++0x03
line.long 0x00 "SIRSSCAPR,Station Interface RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 8. (increment 0x00 0x200)(increment 0 1)
tree "BDR $2"
group.long ($1+0x8000)++0x07
line.long 0x00 "TB$2MR,Tx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable transmit buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 9. "VIH,VLAN insert hint" "Not inserted,Inserted"
bitfld.long 0x00 8. "CRC,User CRC provided" "Not provided,Provided"
bitfld.long 0x00 4.--6. "WRR,WRR weight" "1,2,3,4,5,6,7,8"
newline
bitfld.long 0x00 0.--2. "PRIO,Priority" "Lowest,1,2,3,4,5,6,Highest"
line.long 0x04 "TB$2SR,Tx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "BUSY,Transmit ring is busy" "Idle,Busy"
group.long ($1+0x8010)++0x13
line.long 0x00 "TB$2BAR0,Tx BDR $2 Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x04 "TB$2BAR1,Tx BDR $2 Base Address Register 1"
line.long 0x08 "TB$2PIR,Tx BDR $2 Producer Index Register"
hexmask.long.word 0x08 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
line.long 0x0C "TB$2CIR,Tx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 16.--31. 0x01 "STAT_ID,Status identifier"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring consumer index"
line.long 0x10 "TB$2LENR,Tx BDR $2 Length Register"
hexmask.long.tbyte 0x10 3.--16. 0x08 "LENGTH,BD ring length"
group.long ($1+0x80A0)++0x03
line.long 0x00 "TB$2IER,Tx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 1. "TXFIE,Transmit frame interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TXTIE,Transmit threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x80A4)++0x03
line.long 0x00 "TB$2IDR,Tx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 1. "TXF,Transmit of frame" "No transmit,Transmit"
bitfld.long 0x00 0. "TXT,Transmit threshold" "No threshold,Threshold"
group.long ($1+0x80A8)++0x07
line.long 0x00 "TB$2ICR0,Tx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "ICPT,Interrupt coalescing packet threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384"
line.long 0x04 "TB$2ICR1,Tx BDR $2 Interrupt Coalescing Register 1"
group.long ($1+0x8100)++0x1B
line.long 0x00 "RB$2MR,Rx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable receive buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 6. "VTPD,VLAN tag presentation disable" "No,Yes"
bitfld.long 0x00 5. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CM,Congestion mode" "Lossy,Lossless"
newline
bitfld.long 0x00 2. "BDS,BD size" "16B,32B"
bitfld.long 0x00 0. "AL,Header alignment" "Not added,Added"
line.long 0x04 "RB$2SR,Rx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "EMPTY,Ring is empty" "Not empty,Empty"
line.long 0x08 "RB$2BSR,Rx BDR $2 Buffer Size Register"
hexmask.long.word 0x08 0.--15. 0x01 "BSIZE,Buffer size"
line.long 0x0C "RB$2CIR,Rx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,receive buffer descriptor ring consumer index"
line.long 0x10 "RB$2BAR0,Rx BDR $2 Base Address Register 0"
hexmask.long 0x10 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x14 "RB$2BAR1,Rx BDR $2 Base Address Register 1"
line.long 0x18 "RB$2PIR,Rx BDR $2 Producer Index Register"
hexmask.long.word 0x18 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
group.long ($1+0x8120)++0x03
line.long 0x00 "RB$2LENR,Rx BDR $2 Length Register"
hexmask.long.tbyte 0x00 3.--16. 0x08 "LENGTH,BD ring length"
rgroup.long ($1+0x8180)++0x03
line.long 0x00 "RB$2DCR,Rx BDR $2 Drop Count Register"
group.long ($1+0x81A0)++0x03
line.long 0x00 "RB$2IER,Rx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 0. "RXTIE,Receive threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x81A4)++0x03
line.long 0x00 "RB$2IDR,Rx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 0. "RXT,Receive threshold" "No threshold,Threshold"
group.long ($1+0x81A8)++0x07
line.long 0x00 "RB$2ICR0,Rx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--8. 0x01 "ICPT,Interrupt coalescing packet threshold"
line.long 0x04 "RB$2ICR1,Rx BDR $2 Interrupt Coalescing Register 1"
tree.end
repeat.end
tree.end
tree "ENETC_P3_SI0"
base ad:0x1F80C0000
group.long 0x00++0x03
line.long 0x00 "SIMR,Station Interface Mode Register"
bitfld.long 0x00 31. "EN,Enable station interface" "Disabled,Enabled"
bitfld.long 0x00 16. "DEFAULT_RX_GROUP,Default receive group" "0,1"
bitfld.long 0x00 4. "V2IPVE,VLAN to IPV mapping enable" "Disabled,Enabled"
bitfld.long 0x00 3. "RNBM,Receive no broad-cast mode" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "RNMM,Receive no multi-cast mode" "Disabled,Enabled"
bitfld.long 0x00 1. "RNUM,Receive no unicast-cast mode" "Disabled,Enabled"
bitfld.long 0x00 0. "RSEE,RSS classification enable" "Disabled,Enabled"
rgroup.long 0x04++0x03
line.long 0x00 "SISR,Station Interface Status Register"
bitfld.long 0x00 4. "VLAN_UTA,SI VLAN untagged frames accepted" "Not accepted,Accepted"
bitfld.long 0x00 3. "VLAN_P,SI VLAN promiscuous" "0,1"
bitfld.long 0x00 2. "MAC_MP,SI MAC multicast promiscuous" "0,1"
bitfld.long 0x00 1. "MAC_UP,SI MAC unicast promiscuous" "0,1"
newline
bitfld.long 0x00 0. "TX_BUSY,Transmit busy" "Idle,Busy"
repeat 2. (increment 0x18 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SICTR$2,Station Interface Current Time Register $2"
repeat.end
rgroup.long 0x20++0x07
line.long 0x00 "SIPCAPR0,Station Interface Port Capability Register 0"
bitfld.long 0x00 13. "WO,Support for Wake-on-LAN in low-power mode" "Not supported,Supported"
bitfld.long 0x00 12. "PSC,Parse summary classification support" "Not supported,Supported"
bitfld.long 0x00 11. "MDIO,Internal MDIO port supported" "Not supported,Supported"
bitfld.long 0x00 10. "PSFPM,Managing support for IEEE 802.1Qci" "Not supported,Supported"
newline
bitfld.long 0x00 9. "PSFP,Support for IEEE 802.1Qci" "Not supported,Supported"
bitfld.long 0x00 8. "RSS,Support for RSS" "Not supported,Supported"
bitfld.long 0x00 7. "AR,Support for auto-respond" "Not supported,Supported"
bitfld.long 0x00 6. "MSEC,Support for MACsec" "Not supported,Supported"
newline
bitfld.long 0x00 5. "TSD,Support for time specific departure" "Not supported,Supported"
bitfld.long 0x00 4. "QBV,Support for time gating" "Not supported,Supported"
bitfld.long 0x00 3. "QBU,IEEE 802.1Qbu preemptive MAC support" "Not supported,Supported"
bitfld.long 0x00 2. "RFS,Receive flow steering support" "Not supported,Supported"
newline
bitfld.long 0x00 1. "GRO,TCP/UDP reassembly offload support" "Not supported,Supported"
bitfld.long 0x00 0. "GSO,TCP/UDP assembly offload support" "Not supported,Supported"
line.long 0x04 "SIPCAPR1,Station Interface Port Capability Register 1"
bitfld.long 0x04 12.--15. "NUM_MSIX,Number of MSI-X vectors per physical/virtual function" "8,16,32,64,128,256,512,1k,2k,?..."
bitfld.long 0x04 8.--9. "NUM_MCH,Number of multicast hash entries per SI" "64,128,256,512"
bitfld.long 0x04 4.--6. "NUM_TCS,Number of traffic classes" "1,2,3,4,5,6,7,8"
rgroup.long 0x30++0x03
line.long 0x00 "SITGTGR,Station Interface Time Gating Tick Granularity Register"
group.long 0x38++0x03
line.long 0x00 "SIRBGCR,Station Interface Receive BDR Group Control Register"
bitfld.long 0x00 16.--18. "RINGS_PER_GROUP,Number of rings per group" "1,2,3,4,5,6,7,8"
bitfld.long 0x00 0.--1. "NUM_GROUPS,Number of groups used" "0,1,2,3"
group.long 0x40++0x03
line.long 0x00 "SICAR0,Station Interface Cache Attribute Register 0"
bitfld.long 0x00 30. "RDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "RDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "RDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "BD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "BD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "BD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "WRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "WRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "BD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "BD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "BD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x48++0x03
line.long 0x00 "SICAR2,Station Interface Cache Attribute Register 2"
bitfld.long 0x00 30. "CRDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "CRDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "CRDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 22. "CBD_RDSNP,Buffer descriptor read snoop" "0,1"
newline
bitfld.long 0x00 20.--21. "CBD_RDDOMAIN,Buffer descriptor read domain" "0,1,2,3"
bitfld.long 0x00 16.--19. "CBD_RDCACHE,Buffer descriptor read cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "CWRSNP,Write data snoop" "0,1"
bitfld.long 0x00 12.--13. "CWRDOMAIN,Write data domain" "0,1,2,3"
newline
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 6. "CBD_WRSNP,Buffer descriptor write snoop" "0,1"
bitfld.long 0x00 4.--5. "CBD_WRDOMAIN,Buffer descriptor write domain" "0,1,2,3"
bitfld.long 0x00 0.--3. "CBD_WRCACHE,Buffer descriptor write cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x80++0x07
line.long 0x00 "SIPMAR0,Station Interface Primary MAC Address Register 0"
line.long 0x04 "SIPMAR1,Station Interface Primary MAC Address Register 1"
hexmask.long.word 0x04 0.--15. 0x01 "PRIM_MAC_ADDR,Primary MAC address"
repeat 2. (increment 0x90 0x04)(increment 1 1)
rgroup.long $1++0x03
line.long 0x00 "SICVLANR$2,Station Interface Custom VLAN Register $2"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.word 0x00 0.--15. 1. "ETYPE,Ethertype"
repeat.end
group.long 0x100++0x07
line.long 0x00 "SIVLANIPVMR0,Station Interface VLAN To IPV Mapping Register 0"
bitfld.long 0x00 28.--30. "PCP_DEI_7,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "PCP_DEI_6,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "PCP_DEI_5,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "PCP_DEI_4,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "PCP_DEI_3,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "PCP_DEI_2,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "PCP_DEI_1,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "PCP_DEI_0,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
line.long 0x04 "SIVLANIPVMR1,Station Interface VLAN To IPV Mapping Register 1"
bitfld.long 0x04 28.--30. "PCP_DEI_15,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "PCP_DEI_14,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 20.--22. "PCP_DEI_13,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "PCP_DEI_12,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "PCP_DEI_11,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "PCP_DEI_10,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 4.--6. "PCP_DEI_9,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "PCP_DEI_8,IPV value used for PCP+DEI attribute" "0,1,2,3,4,5,6,7"
group.long 0x150++0x03
line.long 0x00 "SIIPVBDRMR,Station Interface IPV To Ring Mapping Register"
bitfld.long 0x00 28.--30. "IPV7BDR,BD ring used within the group for IPV 7" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 24.--26. "IPV6BDR,BD ring used within the group for IPV 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "IPV5BDR,BD ring used within the group for IPV 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "IPV4BDR,BD ring used within the group for IPV 4" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "IPV3BDR,BD ring used within the group for IPV 3" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "IPV2BDR,BD ring used within the group for IPV 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "IPV1BDR,BD ring used within the group for IPV 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "IPV0BDR,BD ring used within the group for IPV 0" "0,1,2,3,4,5,6,7"
repeat 2. (increment 0x300 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIROCT$2,Station Interface Receive Octets Counter $2"
repeat.end
repeat 2. (increment 0x308 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRFRM$2,Station Interface Receive Frame Counter $2"
repeat.end
repeat 2. (increment 0x310 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRUCA$2,Station Interface Receive Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x318 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SIRMCA$2,Station Interface Receive Multicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x320 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITOCT$2,Station Interface Transmit Octets Counter $2"
repeat.end
repeat 2. (increment 0x328 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITFRM$2,Station Interface Transmit Frame Counter $2"
repeat.end
repeat 2. (increment 0x330 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITUCA$2,Station Interface Transmit Unicast Frame Counter $2"
repeat.end
repeat 2. (increment 0x338 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SITMCA$2,Station Interface Transmit Multicast Frame Counter $2"
repeat.end
group.long 0x800++0x03
line.long 0x00 "SICBDRMR,Station Interface Control BDR Mode Register"
bitfld.long 0x00 31. "EN,Enable control buffer descriptor ring" "Disabled,Enabled"
rgroup.long 0x804++0x03
line.long 0x00 "SICBDRSR,Station Interface Control BDR Status Register"
bitfld.long 0x00 0. "BUSY,Busy" "Idle,Busy"
group.long 0x810++0x13
line.long 0x00 "SICBDRBAR0,Station Interface Control BDR Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits"
line.long 0x04 "SICBDRBAR1,Station Interface Control BDR Base Address Register 1"
line.long 0x08 "SICBDRPIR,Station Interface Control BDR Producer Index Register"
hexmask.long.word 0x08 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring producer index"
line.long 0x0C "SICBDRCIR,Station Interface Control BDR Consumer Index Register"
hexmask.long.word 0x0C 0.--9. 1. "BSR_INDEX,Control buffer descriptor ring consumer index"
line.long 0x10 "SICBDRLENR,Station Interface Control BDR Length Register"
hexmask.long.word 0x10 3.--10. 0x08 "LENGTH,BD ring length"
group.long 0x8A4++0x03
line.long 0x00 "SICBDREDR,Station Interface Control BDR Event Detect Register"
eventfld.long 0x00 0. "CBDC,Control BD completed" "Not completed,Completed"
rgroup.long 0x900++0x0B
line.long 0x00 "SICAPR0,Station Interface Capability Register 0"
bitfld.long 0x00 28.--29. "NUM_MAC_ADR,Number of MAC address" "1,2,3,4"
hexmask.long.byte 0x00 16.--23. 1. "NUM_RX_BDR,Number of receive buffer descriptor rings assigned to the SI"
hexmask.long.byte 0x00 0.--7. 1. "NUM_TX_BDR,Number of transmit buffer descriptor rings assigned to the SI"
line.long 0x04 "SICAPR1,Station Interface Capability Register 1"
hexmask.long.byte 0x04 16.--23. 1. "NUM_RX_GRP,Max number of receive buffer descriptor ring groups available to the SI"
line.long 0x08 "SICAPR2,Station Interface Capability Register 2"
bitfld.long 0x08 3. "VTP[3],VLAN types permitted bit 3 [Standard C-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 2. "VTP[2],VLAN types permitted bit 2 [Standard S-VLAN]" "Not permitted,Permitted"
bitfld.long 0x08 1. "VTP[1],VLAN types permitted bit 1 [VLAN defined by PCVLANR1]" "Not permitted,Permitted"
bitfld.long 0x08 0. "VTP[0],VLAN types permitted bit 0 [VLAN defined by PCVLANR2]" "Not permitted,Permitted"
group.long 0xA18++0x03
line.long 0x00 "SITXIDR,Station Interface Transmit Interrupt Detect Register"
eventfld.long 0x00 23. "TXF7,Summary of detected transmit frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 22. "TXF6,Summary of detected transmit frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 21. "TXF5,Summary of detected transmit frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 20. "TXF4,Summary of detected transmit frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 19. "TXF3,Summary of detected transmit frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 18. "TXF2,Summary of detected transmit frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 17. "TXF1,Summary of detected transmit frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 16. "TXF0,Summary of detected transmit frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "TXT7,Summary of detected threshold frame interrupts for transmit ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "TXT6,Summary of detected threshold frame interrupts for transmit ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "TXT5,Summary of detected threshold frame interrupts for transmit ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "TXT4,Summary of detected threshold frame interrupts for transmit ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "TXT3,Summary of detected threshold frame interrupts for transmit ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "TXT2,Summary of detected threshold frame interrupts for transmit ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "TXT1,Summary of detected threshold frame interrupts for transmit ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "TXT0,Summary of detected threshold frame interrupts for transmit ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA28++0x03
line.long 0x00 "SIRXIDR,Station Interface Receive Interrupt Detect Register"
eventfld.long 0x00 7. "RX7,Summary of detected interrupts for receive ring 7 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 6. "RX6,Summary of detected interrupts for receive ring 6 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 5. "RX5,Summary of detected interrupts for receive ring 5 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 4. "RX4,Summary of detected interrupts for receive ring 4 assigned to SI" "No interrupt,Interrupt"
newline
eventfld.long 0x00 3. "RX3,Summary of detected interrupts for receive ring 3 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 2. "RX2,Summary of detected interrupts for receive ring 2 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 1. "RX1,Summary of detected interrupts for receive ring 1 assigned to SI" "No interrupt,Interrupt"
eventfld.long 0x00 0. "RX0,Summary of detected interrupts for receive ring 0 assigned to SI" "No interrupt,Interrupt"
group.long 0xA30++0x03
line.long 0x00 "SIMSIVR,Station Interface MSI-X Vector Register"
bitfld.long 0x00 0.--3. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat 8. (increment 0xB00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSITR$2VR,Station Interface MSI-X Transmit Ring A Vector Register"
bitfld.long 0x00 0.--3. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
repeat 8. (increment 0xB80 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SIMSIRR$2VR,Station Interface MSI-X Receive Ring A Vector Register"
bitfld.long 0x00 0.--3. "VECTOR,Vector" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0xE20++0x07
line.long 0x00 "SIUEDR,Station Interface Uncorrectable Error Detect Register"
eventfld.long 0x00 19. "DROP_RING_SEL,Non-existing receive ring counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 18. "DROP_GRP_SEL,Non-existing receive group counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 17. "DROP_RING_EN,Station interface ring disabled drop counted in SIUEFDCR" "No effect,Cleared"
eventfld.long 0x00 16. "DROP_SI_EN,Station interface disabled drop counted in SIUEFDCR" "No effect,Cleared"
newline
eventfld.long 0x00 0. "PE,Programming error" "No effect,Cleared"
line.long 0x04 "SIUERER,Station Interface Uncorrectable Error Report Enable Register"
bitfld.long 0x04 0. "PERE,Programming error report enable" "Disabled,Enabled"
rgroup.long 0xE28++0x03
line.long 0x00 "SIUEFDCR,Station Interface Uncorrectable Error Frame Drop Count Register"
rgroup.long 0xE30++0x03
line.long 0x00 "SIUMEDR,Station Interface Uncorrectable Memory Error Detect Register"
bitfld.long 0x00 31. "V,Valid" "Not valid,Valid"
bitfld.long 0x00 30. "M,Multiple" "Low,High"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xE38++0x03
line.long 0x00 "SIUSBEDR,Station Interface Uncorrectable System Bus Error Detect Register"
eventfld.long 0x00 31. "V,Valid" "Not valid,Valid"
rbitfld.long 0x00 30. "M,Multiple" "Low,High"
bitfld.long 0x00 29. "RD,Report disable" "No,Yes"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
rgroup.long 0x1000++0x03
line.long 0x00 "SIMAFTCAPR,Station Interface MAC Address Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_MAC_AFTE,Number of MAC address filter table entries for use by SI"
rgroup.long 0x1100++0x03
line.long 0x00 "SIVFTCAPR,Station Interface VLAN Filter Table Capability Register"
hexmask.long.byte 0x00 0.--7. 0x01 "NUM_VLAN_FTE,Number of VLAN filter table entries for use by SI"
rgroup.long 0x1200++0x03
line.long 0x00 "SIRFSCAPR,Station Interface RFS Capability Register"
hexmask.long.word 0x00 0.--8. 0x01 "NUM_RFS,Number of receive flow steering entries available for use"
rgroup.long 0x1600++0x03
line.long 0x00 "SIRSSCAPR,Station Interface RSS Capability Register"
bitfld.long 0x00 0.--3. "NUM_RSS,Number of receive side-scaling" "32,64,128,256,512,1K,2K,4K,8K,16K,32K,64K,128K,256K,512K,1M"
repeat 8. (increment 0x00 0x200)(increment 0 1)
tree "BDR $2"
group.long ($1+0x8000)++0x07
line.long 0x00 "TB$2MR,Tx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable transmit buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 9. "VIH,VLAN insert hint" "Not inserted,Inserted"
bitfld.long 0x00 8. "CRC,User CRC provided" "Not provided,Provided"
bitfld.long 0x00 4.--6. "WRR,WRR weight" "1,2,3,4,5,6,7,8"
newline
bitfld.long 0x00 0.--2. "PRIO,Priority" "Lowest,1,2,3,4,5,6,Highest"
line.long 0x04 "TB$2SR,Tx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "BUSY,Transmit ring is busy" "Idle,Busy"
group.long ($1+0x8010)++0x13
line.long 0x00 "TB$2BAR0,Tx BDR $2 Base Address Register 0"
hexmask.long 0x00 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x04 "TB$2BAR1,Tx BDR $2 Base Address Register 1"
line.long 0x08 "TB$2PIR,Tx BDR $2 Producer Index Register"
hexmask.long.word 0x08 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
line.long 0x0C "TB$2CIR,Tx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 16.--31. 0x01 "STAT_ID,Status identifier"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring consumer index"
line.long 0x10 "TB$2LENR,Tx BDR $2 Length Register"
hexmask.long.tbyte 0x10 3.--16. 0x08 "LENGTH,BD ring length"
group.long ($1+0x80A0)++0x03
line.long 0x00 "TB$2IER,Tx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 1. "TXFIE,Transmit frame interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TXTIE,Transmit threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x80A4)++0x03
line.long 0x00 "TB$2IDR,Tx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 1. "TXF,Transmit of frame" "No transmit,Transmit"
bitfld.long 0x00 0. "TXT,Transmit threshold" "No threshold,Threshold"
group.long ($1+0x80A8)++0x07
line.long 0x00 "TB$2ICR0,Tx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "ICPT,Interrupt coalescing packet threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384"
line.long 0x04 "TB$2ICR1,Tx BDR $2 Interrupt Coalescing Register 1"
group.long ($1+0x8100)++0x1B
line.long 0x00 "RB$2MR,Rx BDR $2 Mode Register"
bitfld.long 0x00 31. "EN,Enable receive buffer descriptor ring" "Disabled,Enabled"
bitfld.long 0x00 6. "VTPD,VLAN tag presentation disable" "No,Yes"
bitfld.long 0x00 5. "VTE,VLAN tag extract enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CM,Congestion mode" "Lossy,Lossless"
newline
bitfld.long 0x00 2. "BDS,BD size" "16B,32B"
bitfld.long 0x00 0. "AL,Header alignment" "Not added,Added"
line.long 0x04 "RB$2SR,Rx BDR $2 Status Register"
eventfld.long 0x04 16. "SBE,System bus error" "Not cleared,Cleared"
rbitfld.long 0x04 0. "EMPTY,Ring is empty" "Not empty,Empty"
line.long 0x08 "RB$2BSR,Rx BDR $2 Buffer Size Register"
hexmask.long.word 0x08 0.--15. 0x01 "BSIZE,Buffer size"
line.long 0x0C "RB$2CIR,Rx BDR $2 Consumer Index Register"
hexmask.long.word 0x0C 0.--15. 0x01 "BDR_INDEX,receive buffer descriptor ring consumer index"
line.long 0x10 "RB$2BAR0,Rx BDR $2 Base Address Register 0"
hexmask.long 0x10 7.--31. 0x80 "ADDRL,Lower address bits 31-7"
line.long 0x14 "RB$2BAR1,Rx BDR $2 Base Address Register 1"
line.long 0x18 "RB$2PIR,Rx BDR $2 Producer Index Register"
hexmask.long.word 0x18 0.--15. 0x01 "BDR_INDEX,Transmit buffer descriptor ring producer index"
group.long ($1+0x8120)++0x03
line.long 0x00 "RB$2LENR,Rx BDR $2 Length Register"
hexmask.long.tbyte 0x00 3.--16. 0x08 "LENGTH,BD ring length"
rgroup.long ($1+0x8180)++0x03
line.long 0x00 "RB$2DCR,Rx BDR $2 Drop Count Register"
group.long ($1+0x81A0)++0x03
line.long 0x00 "RB$2IER,Rx BDR $2 Interrupt Enable Register"
bitfld.long 0x00 0. "RXTIE,Receive threshold interrupt enable" "Disabled,Enabled"
rgroup.long ($1+0x81A4)++0x03
line.long 0x00 "RB$2IDR,Rx BDR $2 Interrupt Detect Register"
bitfld.long 0x00 0. "RXT,Receive threshold" "No threshold,Threshold"
group.long ($1+0x81A8)++0x07
line.long 0x00 "RB$2ICR0,Rx BDR $2 Interrupt Coalescing Register 0"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--8. 0x01 "ICPT,Interrupt coalescing packet threshold"
line.long 0x04 "RB$2ICR1,Rx BDR $2 Interrupt Coalescing Register 1"
tree.end
repeat.end
tree.end
tree.end
tree "EMDIO Embedded Function Registers"
base ad:0x1F8100000
if (((per.l(ad:0x1F8100000+0x1C00))&0x400000)==0x400000)
group.long 0x1C00++0x03
line.long 0x00 "EMDIO_CFG,External MDIO Configuration Register"
rbitfld.long 0x00 31. "BSY1,MDIO busy" "Not busy,Busy"
eventfld.long 0x00 30. "CMP,MDIO command completion event" "Not occurred,Occurred"
bitfld.long 0x00 29. "CIM,MDIO command completion interrupt enable mask" "Masked,Not masked"
newline
bitfld.long 0x00 23. "NEG,MDIO drive by master on MDC negative edge" "Normal operation,Negative edge"
bitfld.long 0x00 22. "EHOLD,Extended hold" "Not extended,Extended"
rbitfld.long 0x00 16.--18. "WHOAMI,Virtual port ID" "0,1,2,3,4,5,6,7"
newline
hexmask.long.word 0x00 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor"
bitfld.long 0x00 6. "ENC45,Clause 45 support enable" "Disabled,Enabled"
bitfld.long 0x00 2.--4. "MDIO_HOLD,MDIO hold time in cycles" "1,9,17,25,33,41,49,57"
newline
rbitfld.long 0x00 1. "MDIO_RD_ER,MDIO read error" "No error,Error"
rbitfld.long 0x00 0. "BSY2,MDIO busy" "Not busy,Busy"
else
group.long 0x1C00++0x03
line.long 0x00 "EMDIO_CFG,External MDIO Configuration Register"
rbitfld.long 0x00 31. "BSY1,MDIO busy" "Not busy,Busy"
eventfld.long 0x00 30. "CMP,MDIO command completion event" "Not occurred,Occurred"
bitfld.long 0x00 29. "CIM,MDIO command completion interrupt enable mask" "Masked,Not masked"
newline
bitfld.long 0x00 23. "NEG,MDIO drive by master on MDC negative edge" "Normal operation,Negative edge"
bitfld.long 0x00 22. "EHOLD,Extended hold" "Not extended,Extended"
rbitfld.long 0x00 16.--18. "WHOAMI,Virtual port ID" "0,1,2,3,4,5,6,7"
newline
hexmask.long.word 0x00 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor"
bitfld.long 0x00 6. "ENC45,Clause 45 support enable" "Disabled,Enabled"
bitfld.long 0x00 2.--4. "MDIO_HOLD,MDIO hold time in cycles" "1,3,5,7,9,11,13,15"
newline
rbitfld.long 0x00 1. "MDIO_RD_ER,MDIO read error" "No error,Error"
rbitfld.long 0x00 0. "BSY2,MDIO busy" "Not busy,Busy"
endif
if (((per.l(ad:0x1F8100000+0x1C00))&0x40)==0x40)
group.long 0x1C04++0x03
line.long 0x00 "EMDIO_CTL,External MDIO Interface Control Register"
bitfld.long 0x00 31. "BSY,MDIO busy" "Not occurred,Occurred"
bitfld.long 0x00 15. "READ,MDIO read initiation" "Not initiated,Initiated"
newline
bitfld.long 0x00 14. "POST_INC,MDIO read with address post-increment initiation" "Not initiated,Initiated"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,MDIO port address"
newline
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,MDIO device address"
else
group.long 0x1C04++0x03
line.long 0x00 "EMDIO_CTL,External MDIO Interface Control Register"
bitfld.long 0x00 31. "BSY,MDIO busy" "Not occurred,Occurred"
bitfld.long 0x00 15. "READ,MDIO read initiation" "Not initiated,Initiated"
newline
bitfld.long 0x00 14. "POST_INC,MDIO read with address post-increment initiation" "Not initiated,Initiated"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,PHY address"
newline
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,Register address"
endif
group.long 0x1C08++0x07
line.long 0x00 "EMDIO_DATA,External MDIO Interface Data Register"
hexmask.long.word 0x00 0.--15. 1. "MDIO_DATA,16-bit MDIO data"
line.long 0x04 "EMDIO_ADDR,External MDIO Register Address Register"
hexmask.long.word 0x04 0.--15. 0x01 "REGADDR,MDIO PHY register address"
rgroup.long 0x1C10++0x03
line.long 0x00 "EMDIO_STAT,External MDIO Status Register"
bitfld.long 0x00 19. "REQ_TYPE,Request type of the active virtual port" "MDIO,PHY"
bitfld.long 0x00 16.--18. "PORT_ID,Port ID" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "BSY,Global MDIO busy" "Not busy,Busy"
group.long 0x1C20++0x03
line.long 0x00 "PHY_STATUS_CFG,PHY Status Configuration Register"
hexmask.long.word 0x00 16.--31. 1. "STATUS_INTERVAL,Amount of time to wait between PHY status reads"
rbitfld.long 0x00 1. "MDIO_RD_ER,MDIO read error" "No error,Error"
rbitfld.long 0x00 0. "BSY,MDIO busy" "Not busy,Busy"
if (((per.l(ad:0x1F8100000+0x1C00))&0x40)==0x40)
wgroup.long 0x1C24++0x03
line.long 0x00 "PHY_STATUS_CTL,PHY Status Control Register"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,MDIO port address"
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,MDIO device address"
else
wgroup.long 0x1C24++0x03
line.long 0x00 "PHY_STATUS_CTL,PHY Status Control Register"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,PHY address"
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,Register address"
endif
rgroup.long 0x1C28++0x03
line.long 0x00 "PHY_STATUS_DATA,PHY Status Data Register"
hexmask.long.word 0x00 16.--31. 1. "CURR_CNT,Current value of status interval counter"
hexmask.long.word 0x00 0.--15. 1. "MDIO_DATA,MDIO Data"
group.long 0x1C2C++0x0B
line.long 0x00 "PHY_STATUS_ADDR,PHY Status Register Address Register"
hexmask.long.word 0x00 0.--15. 0x01 "REGADDR,MDIO PHY register address"
line.long 0x04 "PHY_STATUS_EVENT,PHY Status Event Register"
eventfld.long 0x04 31. "STATUS_EVENT_LH[15],Transition 0->1 on data bit 15" "Not occurred,Occurred"
eventfld.long 0x04 30. "[14],Transition 0->1 on data bit 14" "Not occurred,Occurred"
eventfld.long 0x04 29. "[13],Transition 0->1 on data bit 13" "Not occurred,Occurred"
eventfld.long 0x04 28. "[12],Transition 0->1 on data bit 12" "Not occurred,Occurred"
newline
eventfld.long 0x04 27. "[11],Transition 0->1 on data bit 11" "Not occurred,Occurred"
eventfld.long 0x04 26. "[10],Transition 0->1 on data bit 10" "Not occurred,Occurred"
eventfld.long 0x04 25. "[9],Transition 0->1 on data bit 9" "Not occurred,Occurred"
eventfld.long 0x04 24. "[8],Transition 0->1 on data bit 8" "Not occurred,Occurred"
newline
eventfld.long 0x04 23. "[7],Transition 0->1 on data bit 7" "Not occurred,Occurred"
eventfld.long 0x04 22. "[6],Transition 0->1 on data bit 6" "Not occurred,Occurred"
eventfld.long 0x04 21. "[5],Transition 0->1 on data bit 5" "Not occurred,Occurred"
eventfld.long 0x04 20. "[4],Transition 0->1 on data bit 4" "Not occurred,Occurred"
newline
eventfld.long 0x04 19. "[3],Transition 0->1 on data bit 3" "Not occurred,Occurred"
eventfld.long 0x04 18. "[2],Transition 0->1 on data bit 2" "Not occurred,Occurred"
eventfld.long 0x04 17. "[1],Transition 0->1 on data bit 1" "Not occurred,Occurred"
eventfld.long 0x04 16. "[0],Transition 0->1 on data bit 0" "Not occurred,Occurred"
newline
eventfld.long 0x04 15. "STATUS_EVENT_HL[15],Transition 1->0 on data bit 15" "Not occurred,Occurred"
eventfld.long 0x04 14. "[14],Transition 1->0 on data bit 14" "Not occurred,Occurred"
eventfld.long 0x04 13. "[13],Transition 1->0 on data bit 13" "Not occurred,Occurred"
eventfld.long 0x04 12. "[12],Transition 1->0 on data bit 12" "Not occurred,Occurred"
newline
eventfld.long 0x04 11. "[11],Transition 1->0 on data bit 11" "Not occurred,Occurred"
eventfld.long 0x04 10. "[10],Transition 1->0 on data bit 10" "Not occurred,Occurred"
eventfld.long 0x04 9. "[9],Transition 1->0 on data bit 9" "Not occurred,Occurred"
eventfld.long 0x04 8. "[8],Transition 1->0 on data bit 8" "Not occurred,Occurred"
newline
eventfld.long 0x04 7. "[7],Transition 1->0 on data bit 7" "Not occurred,Occurred"
eventfld.long 0x04 6. "[6],Transition 1->0 on data bit 6" "Not occurred,Occurred"
eventfld.long 0x04 5. "[5],Transition 1->0 on data bit 5" "Not occurred,Occurred"
eventfld.long 0x04 4. "[4],Transition 1->0 on data bit 4" "Not occurred,Occurred"
newline
eventfld.long 0x04 3. "[3],Transition 1->0 on data bit 3" "Not occurred,Occurred"
eventfld.long 0x04 2. "[2],Transition 1->0 on data bit 2" "Not occurred,Occurred"
eventfld.long 0x04 1. "[1],Transition 1->0 on data bit 1" "Not occurred,Occurred"
eventfld.long 0x04 0. "[0],Transition 1->0 on data bit 0" "Not occurred,Occurred"
line.long 0x08 "PHY_STATUS_MASK,PHY Status Mask Register"
bitfld.long 0x08 31. "STATUS_MASK_LH[15],Status mask low-to-high bit 15" "0,1"
bitfld.long 0x08 30. "[14],Status mask low-to-high bit 14" "0,1"
bitfld.long 0x08 29. "[13],Status mask low-to-high bit 13" "0,1"
bitfld.long 0x08 28. "[12],Status mask low-to-high bit 12" "0,1"
newline
bitfld.long 0x08 27. "[11],Status mask low-to-high bit 11" "0,1"
bitfld.long 0x08 26. "[10],Status mask low-to-high bit 10" "0,1"
bitfld.long 0x08 25. "[9],Status mask low-to-high bit 9" "0,1"
bitfld.long 0x08 24. "[8],Status mask low-to-high bit 8" "0,1"
newline
bitfld.long 0x08 23. "[7],Status mask low-to-high bit 7" "0,1"
bitfld.long 0x08 22. "[6],Status mask low-to-high bit 6" "0,1"
bitfld.long 0x08 21. "[5],Status mask low-to-high bit 5" "0,1"
bitfld.long 0x08 20. "[4],Status mask low-to-high bit 4" "0,1"
newline
bitfld.long 0x08 19. "[3],Status mask low-to-high bit 3" "0,1"
bitfld.long 0x08 18. "[2],Status mask low-to-high bit 2" "0,1"
bitfld.long 0x08 17. "[1],Status mask low-to-high bit 1" "0,1"
bitfld.long 0x08 16. "[0],Status mask low-to-high bit 0" "0,1"
newline
bitfld.long 0x08 15. "STATUS_MASK_HL[15],Status mask high-to-low bit 15" "0,1"
bitfld.long 0x08 14. "[14],Status mask high-to-low bit 14" "0,1"
bitfld.long 0x08 13. "[13],Status mask high-to-low bit 13" "0,1"
bitfld.long 0x08 12. "[12],Status mask high-to-low bit 12" "0,1"
newline
bitfld.long 0x08 11. "[11],Status mask high-to-low bit 11" "0,1"
bitfld.long 0x08 10. "[10],Status mask high-to-low bit 10" "0,1"
bitfld.long 0x08 9. "[9],Status mask high-to-low bit 9" "0,1"
bitfld.long 0x08 8. "[8],Status mask high-to-low bit 8" "0,1"
newline
bitfld.long 0x08 7. "[7],Status mask high-to-low bit 7" "0,1"
bitfld.long 0x08 6. "[6],Status mask high-to-low bit 6" "0,1"
bitfld.long 0x08 5. "[5],Status mask high-to-low bit 5" "0,1"
bitfld.long 0x08 4. "[4],Status mask high-to-low bit 4" "0,1"
newline
bitfld.long 0x08 3. "[3],Status mask high-to-low bit 3" "0,1"
bitfld.long 0x08 2. "[2],Status mask high-to-low bit 2" "0,1"
bitfld.long 0x08 1. "[1],Status mask high-to-low bit 1" "0,1"
bitfld.long 0x08 0. "[0],Status mask high-to-low bit 0" "0,1"
tree.end
tree "IEEE 1588/1722 Embedded Function Registers"
base ad:0x1F8200000
rgroup.long 0x00++0x07
line.long 0x00 "TMR_ID,Module ID Register"
hexmask.long.word 0x00 16.--31. 0x01 "TRM_ID,Value identifying the 1588 timer module"
hexmask.long.byte 0x00 8.--15. 0x01 "REV_MJ,Value identifies the major revision of the 1588 timer module"
hexmask.long.byte 0x00 0.--7. 1. "REV_MN,Value identifies the minor revision of the 1588 timer module"
line.long 0x04 "TMR_ID2,Controller ID Register"
hexmask.long.byte 0x00 16.--23. 0x01 "INT,Static integration option"
hexmask.long.byte 0x00 8.--15. 0x01 "MAINT,Maintenance revision"
hexmask.long.byte 0x00 0.--7. 0x01 "CFG,Static configuration option"
group.long 0x80++0x0F
line.long 0x00 "TMR_CTRL,Timer Control Register"
bitfld.long 0x00 31. "ALM1P,Alarm1 output polarity" "Active high,Active low"
bitfld.long 0x00 30. "ALM2P,Alarm2 output polarity" "Active high,Active low"
bitfld.long 0x00 28. "FS,FIPER start indication" "Timer only,Timer/alarm"
bitfld.long 0x00 27. "PP1L,FIPER pulse loopback mode enabled" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "PP2L,FIPER pulse loopback mode enabled" "Disabled,Enabled"
hexmask.long.byte 0x00 16.--25. 0x01 "TCLK_PERIOD,1588 timer reference clock period"
bitfld.long 0x00 14. "FRD,FIPER realignment disable" "No,Yes"
bitfld.long 0x00 9. "ETEP2,External trigger 2 edge polarity" "Rising edge,Falling edge"
newline
bitfld.long 0x00 8. "ETEP1,External trigger 1 edge polarity" "Rising edge,Falling edge"
bitfld.long 0x00 7. "COPH,Generated clock output phase" "Non-inverted,Inverted"
bitfld.long 0x00 6. "CIPH,External oscillator input clock phase" "Non-inverted,Inverted"
bitfld.long 0x00 5. "TMSR,Timer soft reset" "No reset,Reset"
newline
bitfld.long 0x00 3. "BYP,Bypass drift compensated clock" "Accumulator overflow,External oscillator"
bitfld.long 0x00 2. "TE,1588 timer enable" "Not enabled,Enabled"
bitfld.long 0x00 0.--1. "CK_SEL,1588 timer reference clock source select" "External,ENETC,?..."
line.long 0x04 "TMR_TEVENT,Timer Event Register"
eventfld.long 0x04 29. "ETS2_OV,External trigger 2 timestamp FIFO overflow" "Not overflowed,Overflowed"
eventfld.long 0x04 28. "ETS1_OV,External trigger 1 timestamp FIFO overflow" "Not overflowed,Overflowed"
eventfld.long 0x04 25. "ETS2,External trigger 2 new timestamp sampled in TMR_ETTS2_H/L" "Not sampled,Sampled"
eventfld.long 0x04 24. "ETS1,External trigger 1 new timestamp sampled in TMR_ETTS1_H/L" "Not sampled,Sampled"
newline
eventfld.long 0x04 21. "ETS2_THR,External trigger 2 timestamp FIFO threshold level hit" "Less than/equal,More"
eventfld.long 0x04 20. "ETS1_THR,External trigger 1 timestamp FIFO threshold level hit" "Less than/equal,More"
eventfld.long 0x04 17. "ALM2,Current time equalled alarm time register 2" "Not reached,Reached"
eventfld.long 0x04 16. "ALM1,Current time equalled alarm time register 1" "Not reached,Reached"
newline
eventfld.long 0x04 7. "PP1,Indicates that a periodic pulse has been generated based on FIPER1 register" "Not generated,Generated"
eventfld.long 0x04 6. "PP2,Indicates that a periodic pulse has been generated based on FIPER2 register" "Not generated,Generated"
eventfld.long 0x04 5. "PP3,Indicates that a periodic pulse has been generated based on FIPER3 register" "Not generated,Generated"
line.long 0x08 "TMR_TEMASK,Timer Event Mask Register"
bitfld.long 0x08 29. "ETS2_OVEN,External trigger 2 timestamp FIFO Overflow event enabled" "Disabled,Enabled"
bitfld.long 0x08 28. "ETS1_OVEN,External trigger 1 timestamp FIFO Overflow event enabled" "Disabled,Enabled"
bitfld.long 0x08 25. "ETS2EN,External trigger 2 new timestamp sample event enable" "Disabled,Enabled"
bitfld.long 0x08 24. "ETS1EN,External trigger 1 new timestamp sample event enable" "Disabled,Enabled"
newline
bitfld.long 0x08 21. "ETS2_THREN,External trigger 2 timestamp FIFO threshold level hit sample event enable" "Disabled,Enabled"
bitfld.long 0x08 20. "ETS1_THREN,External trigger 1 timestamp FIFO threshold level hit sample event enable" "Disabled,Enabled"
bitfld.long 0x08 17. "ALM2EN,Timer ALM1 event enable" "Disabled,Enabled"
bitfld.long 0x08 16. "ALM1EN,Timer ALM2 event enable" "Disabled,Enabled"
newline
bitfld.long 0x08 7. "PP1EN,Periodic pulse event 1 enable" "Disabled,Enabled"
bitfld.long 0x08 6. "PP2EN,Periodic pulse event 2 enable" "Disabled,Enabled"
bitfld.long 0x08 5. "PP3EN,Periodic pulse event 3 enable" "Disabled,Enabled"
line.long 0x0C "TMR_MSIVEC,Timer MSI-X Vector Register"
bitfld.long 0x0C 0. "VECTOR,Index into MSI-X address/data table" "0,1"
rgroup.long 0x94++0x03
line.long 0x00 "TMR_STAT,Timer Status Register"
bitfld.long 0x00 31. "RCD,Timer reference clock detected" "Inactive,Active"
bitfld.long 0x00 25. "ETS2_VLD,External trigger 2 valid time-stamp" "Read,Unread"
bitfld.long 0x00 24. "ETS2_VLD,External trigger 2 valid time-stamp" "Read,Unread"
group.long 0x98++0x0B
line.long 0x00 "TMR_CNT_H,Timer Counter High Register"
line.long 0x04 "TMR_CNT_L,Timer Counter Low Register"
line.long 0x08 "TMR_ADD,Timer Drift Compensation Addend Register"
rgroup.long 0xA4++0x03
line.long 0x00 "TMR_ACC,Timer Accumulator Register"
group.long 0xA8++0x1F
line.long 0x00 "TMR_PRSC,Timer Prescale Register"
line.long 0x04 "TMR_ECTRL,Extended Timer Control Register"
line.long 0x08 "TMROFF_H,Timer Offset High Register"
line.long 0x0C "TMROFF_L,Timer Offset Low Register"
line.long 0x10 "TMR_ALARM1_H,Alarm 1 Time Comparator High Register"
line.long 0x14 "TMR_ALARM1_L,Alarm 1 Time Comparator Low Register"
line.long 0x18 "TMR_ALARM2_H,Alarm 2 Time Comparator High Register"
line.long 0x1C "TMR_ALARM2_L,Alarm 2 Time Comparator Low Register"
repeat 3. (increment 0xD0 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "TMR_FIPER$2,Timer $2 Fixed Interval Period Register"
repeat.end
rgroup.long 0xE0++0x17
line.long 0x00 "TMR_ETTS1_H,External Trigger Stamp Register"
line.long 0x04 "TMR_ETTS1_L,External Trigger Stamp Register"
line.long 0x08 "TMR_ETTS2_H,External Trigger Stamp Register"
line.long 0x0C "TMR_ETTS2_L,External Trigger Stamp Register"
line.long 0x10 "TMR_CUR_TIME_H,Timer Current Time High Register"
line.long 0x14 "TMR_CUR_TIME_L,Timer Current Time Low Register"
group.long 0xF8++0x03
line.long 0x00 "TMR_TIME_CTRL,Timer Time Control Register"
repeat 4. (increment 0x100 0x20)(increment 0 1)
group.long $1++0x03
line.long 0x00 "PTCMR$2,Port Timer Control Mode Register $2"
bitfld.long 0x00 11.--15. "TPCW,Timer pulse width control (cycles)" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32"
bitfld.long 0x00 5.--10. "THRESHOLD,Timer ring threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 4. "TDRE,Timer DMA request enable" "Disabled,Enabled"
bitfld.long 0x00 0.--3. "TMODE,Timer channel mode" "Disabled,Input/rising edge,Input/falling edge,Input/both edges,Toggle output,Clear output,Clear output/set on overflow,Set output,Set output/clear on overflow,Pulse output low,Pulse output high,?..."
rgroup.long ($1+0x04)++0x03
line.long 0x00 "PTCSR$2,Port Timer Control Status Register $2"
bitfld.long 0x00 3. "TAE,Timer AXE error" "No error,Error"
bitfld.long 0x00 2. "TTC,Timer threshold crossed" "Not exceeded,Exceeded"
bitfld.long 0x00 1. "TRF,Timer ring full/empty" "Empty,Full"
bitfld.long 0x00 0. "TF,Timer flag" "Not occurred,Occurred"
group.long ($1+0x08)++0x17
line.long 0x00 "PTSTDR$2,Port Timestamp Transit Delay Register $2"
line.long 0x04 "PTCCR$2,Port Timer Compare Capture Register $2"
line.long 0x08 "PTSAUBAR$2,Port Timestamp Array Upper Base Register $2"
line.long 0x0C "PTSALBAR$2,Port Timestamp Array Lower Base Register $2"
hexmask.long 0x0C 8.--31. 0x01 "BASE_LADDR,Lower address bits 32-8"
line.long 0x10 "PTSACIR$2,Port Timestamp Array Consumer Index Register $2"
hexmask.long.byte 0x10 0.--6. 1. "CI,Consumer index"
line.long 0x14 "PTSAPIR$2,Port Timestamp Array Producer Index Register $2"
hexmask.long.byte 0x14 0.--6. 1. "PI,Producer index"
repeat.end
group.long 0x1A0++0x0F
line.long 0x00 "PIER,Port Interrupt Enable Register"
bitfld.long 0x00 15. "TAE3IE,Timer AXI error 3 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "TTC3IE,Timer threshold crossed 3 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "TRF3IE,Timer ring full/empty 3 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 12. "TF3IE,Timer flag 3 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "TAE2IE,Timer AXI error 2 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 10. "TTC2IE,Timer threshold crossed 2 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 9. "TRF2IE,Timer ring full/empty 2 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "TF2IE,Timer flag 2 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "TAE1IE,Timer AXI error 1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 6. "TTC1IE,Timer threshold crossed 1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "TRF1IE,Timer ring full/empty 1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "TF1IE,Timer flag 1 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "TAE0IE,Timer AXI error 0 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "TTC0IE,Timer threshold crossed 0 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "TRF0IE,Timer ring full/empty 0 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TF0IE,Timer flag 0 interrupt enable" "Disabled,Enabled"
line.long 0x04 "PIDR,Port Interrupt Detect Register"
eventfld.long 0x00 15. "TAE3IE,Timer AXI error for channel 3" "Not set,Set"
eventfld.long 0x00 14. "TTC3IE,Timer threshold crossed for channel 3" "Not set,Set"
eventfld.long 0x00 13. "TRF3IE,Timer ring full/empty for channel 3" "Not set,Set"
eventfld.long 0x00 12. "TF3IE,Timer flag for channel 3" "Not set,Set"
newline
eventfld.long 0x00 11. "TAE2IE,Timer AXI error for channel 2" "Not set,Set"
eventfld.long 0x00 10. "TTC2IE,Timer threshold crossed for channel 2" "Not set,Set"
eventfld.long 0x00 9. "TRF2IE,Timer ring full/empty for channel 2" "Not set,Set"
eventfld.long 0x00 8. "TF2IE,Timer flag for channel 2" "Not set,Set"
newline
eventfld.long 0x00 7. "TAE1IE,Timer AXI error for channel 1" "Not set,Set"
eventfld.long 0x00 6. "TTC1IE,Timer threshold crossed for channel 1" "Not set,Set"
eventfld.long 0x00 5. "TRF1IE,Timer ring full/empty for channel 1" "Not set,Set"
eventfld.long 0x00 4. "TF1IE,Timer flag for channel 1" "Not set,Set"
newline
eventfld.long 0x00 3. "TAE0IE,Timer AXI error for channel 0" "Not set,Set"
eventfld.long 0x00 2. "TTC0IE,Timer threshold crossed for channel 0" "Not set,Set"
eventfld.long 0x00 1. "TRF0IE,Timer ring full/empty for channel 0" "Not set,Set"
eventfld.long 0x00 0. "TF0IE,Timer flag for channel 0" "Not set,Set"
line.long 0x08 "PMSIVR,Port MSI-X Vector Register"
bitfld.long 0x00 0. "VECTOR,Index into MSI-X address/data table" "0,1"
line.long 0x0C "TMR_CAR,Timer Interface Cache Attribute Register"
bitfld.long 0x00 30. "RDSNP,Read data snoop" "0,1"
bitfld.long 0x00 28.--29. "RDDOMAIN,Read data domain" "0,1,2,3"
bitfld.long 0x00 24.--27. "RDCACHE,Read data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 14. "WRSNP,Write data snoop" "0,1"
newline
bitfld.long 0x00 12.--13. "WRDOMAIN,Write data domain" "0,1,2,3"
bitfld.long 0x00 8.--11. "WRCACHE,Write data cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree "TSN Ethernet Switch Function Registers"
base ad:0x1F8140000
if (((per.l(ad:0x1F8140000+0x1C00))&0x400000)==0x400000)
group.long 0x1C00++0x03
line.long 0x00 "EMDIO_CFG,External MDIO Configuration Register"
rbitfld.long 0x00 31. "BSY1,MDIO busy" "Not busy,Busy"
eventfld.long 0x00 30. "CMP,MDIO command completion event" "Not occurred,Occurred"
bitfld.long 0x00 29. "CIM,MDIO command completion interrupt enable mask" "Masked,Not masked"
newline
bitfld.long 0x00 23. "NEG,MDIO drive by master on MDC negative edge" "Normal operation,Negative edge"
bitfld.long 0x00 22. "EHOLD,Extended hold" "Not extended,Extended"
rbitfld.long 0x00 16.--18. "WHOAMI,Virtual port ID" "0,1,2,3,4,5,6,7"
newline
hexmask.long.word 0x00 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor"
bitfld.long 0x00 6. "ENC45,Clause 45 support enable" "Disabled,Enabled"
bitfld.long 0x00 2.--4. "MDIO_HOLD,MDIO hold time in cycles" "1,9,17,25,33,41,49,57"
newline
rbitfld.long 0x00 1. "MDIO_RD_ER,MDIO read error" "No error,Error"
rbitfld.long 0x00 0. "BSY2,MDIO busy" "Not busy,Busy"
else
group.long 0x1C00++0x03
line.long 0x00 "EMDIO_CFG,External MDIO Configuration Register"
rbitfld.long 0x00 31. "BSY1,MDIO busy" "Not busy,Busy"
eventfld.long 0x00 30. "CMP,MDIO command completion event" "Not occurred,Occurred"
bitfld.long 0x00 29. "CIM,MDIO command completion interrupt enable mask" "Masked,Not masked"
newline
bitfld.long 0x00 23. "NEG,MDIO drive by master on MDC negative edge" "Normal operation,Negative edge"
bitfld.long 0x00 22. "EHOLD,Extended hold" "Not extended,Extended"
rbitfld.long 0x00 16.--18. "WHOAMI,Virtual port ID" "0,1,2,3,4,5,6,7"
newline
hexmask.long.word 0x00 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor"
bitfld.long 0x00 6. "ENC45,Clause 45 support enable" "Disabled,Enabled"
bitfld.long 0x00 2.--4. "MDIO_HOLD,MDIO hold time in cycles" "1,3,5,7,9,11,13,15"
newline
rbitfld.long 0x00 1. "MDIO_RD_ER,MDIO read error" "No error,Error"
rbitfld.long 0x00 0. "BSY2,MDIO busy" "Not busy,Busy"
endif
if (((per.l(ad:0x1F8140000+0x1C00))&0x40)==0x40)
group.long 0x1C04++0x03
line.long 0x00 "EMDIO_CTL,External MDIO Interface Control Register"
bitfld.long 0x00 31. "BSY,MDIO busy" "Not occurred,Occurred"
bitfld.long 0x00 15. "READ,MDIO read initiation" "Not initiated,Initiated"
newline
bitfld.long 0x00 14. "POST_INC,MDIO read with address post-increment initiation" "Not initiated,Initiated"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,MDIO port address"
newline
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,MDIO device address"
else
group.long 0x1C04++0x03
line.long 0x00 "EMDIO_CTL,External MDIO Interface Control Register"
bitfld.long 0x00 31. "BSY,MDIO busy" "Not occurred,Occurred"
bitfld.long 0x00 15. "READ,MDIO read initiation" "Not initiated,Initiated"
newline
bitfld.long 0x00 14. "POST_INC,MDIO read with address post-increment initiation" "Not initiated,Initiated"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,PHY address"
newline
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,Register address"
endif
group.long 0x1C08++0x07
line.long 0x00 "EMDIO_DATA,External MDIO Interface Data Register"
hexmask.long.word 0x00 0.--15. 1. "MDIO_DATA,16-bit MDIO data"
line.long 0x04 "EMDIO_ADDR,External MDIO Register Address Register"
hexmask.long.word 0x04 0.--15. 0x01 "REGADDR,MDIO PHY register address"
rgroup.long 0x1C10++0x03
line.long 0x00 "EMDIO_STAT,External MDIO Status Register"
bitfld.long 0x00 31. "BSY1,Global MDIO busy" "Not busy,Busy"
bitfld.long 0x00 19. "REQ_TYPE,Request type of the active virtual port" "MDIO,PHY"
bitfld.long 0x00 16.--18. "PORT_ID,Port ID" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0. "BSY2,Global MDIO busy" "Not busy,Busy"
group.long 0x1C20++0x03
line.long 0x00 "PHY_STATUS_CFG,PHY Status Configuration Register"
hexmask.long.word 0x00 16.--31. 1. "STATUS_INTERVAL,Amount of time to wait between PHY status reads"
rbitfld.long 0x00 1. "MDIO_RD_ER,MDIO read error" "No error,Error"
rbitfld.long 0x00 0. "BSY,MDIO busy" "Not busy,Busy"
if (((per.l(ad:0x1F8140000+0x1C00))&0x40)==0x40)
wgroup.long 0x1C24++0x03
line.long 0x00 "PHY_STATUS_CTL,PHY Status Control Register"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,MDIO port address"
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,MDIO device address"
else
wgroup.long 0x1C24++0x03
line.long 0x00 "PHY_STATUS_CTL,PHY Status Control Register"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,PHY address"
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,Register address"
endif
rgroup.long 0x1C28++0x03
line.long 0x00 "PHY_STATUS_DATA,PHY Status Data Register"
hexmask.long.word 0x00 16.--31. 1. "CURR_CNT,Current value of status interval counter"
hexmask.long.word 0x00 0.--15. 1. "MDIO_DATA,MDIO Data"
group.long 0x1C2C++0x0B
line.long 0x00 "PHY_STATUS_ADDR,PHY Status Register Address Register"
hexmask.long.word 0x00 0.--15. 0x01 "REGADDR,MDIO PHY register address"
line.long 0x04 "PHY_STATUS_EVENT,PHY Status Event Register"
eventfld.long 0x04 31. "STATUS_EVENT_LH[15],Transition 0->1 on data bit 15" "Not occurred,Occurred"
eventfld.long 0x04 30. "[14],Transition 0->1 on data bit 14" "Not occurred,Occurred"
eventfld.long 0x04 29. "[13],Transition 0->1 on data bit 13" "Not occurred,Occurred"
newline
eventfld.long 0x04 28. "[12],Transition 0->1 on data bit 12" "Not occurred,Occurred"
eventfld.long 0x04 27. "[11],Transition 0->1 on data bit 11" "Not occurred,Occurred"
eventfld.long 0x04 26. "[10],Transition 0->1 on data bit 10" "Not occurred,Occurred"
newline
eventfld.long 0x04 25. "[9],Transition 0->1 on data bit 9" "Not occurred,Occurred"
eventfld.long 0x04 24. "[8],Transition 0->1 on data bit 8" "Not occurred,Occurred"
eventfld.long 0x04 23. "[7],Transition 0->1 on data bit 7" "Not occurred,Occurred"
newline
eventfld.long 0x04 22. "[6],Transition 0->1 on data bit 6" "Not occurred,Occurred"
eventfld.long 0x04 21. "[5],Transition 0->1 on data bit 5" "Not occurred,Occurred"
eventfld.long 0x04 20. "[4],Transition 0->1 on data bit 4" "Not occurred,Occurred"
newline
eventfld.long 0x04 19. "[3],Transition 0->1 on data bit 3" "Not occurred,Occurred"
eventfld.long 0x04 18. "[2],Transition 0->1 on data bit 2" "Not occurred,Occurred"
eventfld.long 0x04 17. "[1],Transition 0->1 on data bit 1" "Not occurred,Occurred"
newline
eventfld.long 0x04 16. "[0],Transition 0->1 on data bit 0" "Not occurred,Occurred"
eventfld.long 0x04 15. "STATUS_EVENT_HL[15],Transition 1->0 on data bit 15" "Not occurred,Occurred"
eventfld.long 0x04 14. "[14],Transition 1->0 on data bit 14" "Not occurred,Occurred"
newline
eventfld.long 0x04 13. "[13],Transition 1->0 on data bit 13" "Not occurred,Occurred"
eventfld.long 0x04 12. "[12],Transition 1->0 on data bit 12" "Not occurred,Occurred"
eventfld.long 0x04 11. "[11],Transition 1->0 on data bit 11" "Not occurred,Occurred"
newline
eventfld.long 0x04 10. "[10],Transition 1->0 on data bit 10" "Not occurred,Occurred"
eventfld.long 0x04 9. "[9],Transition 1->0 on data bit 9" "Not occurred,Occurred"
eventfld.long 0x04 8. "[8],Transition 1->0 on data bit 8" "Not occurred,Occurred"
newline
eventfld.long 0x04 7. "[7],Transition 1->0 on data bit 7" "Not occurred,Occurred"
eventfld.long 0x04 6. "[6],Transition 1->0 on data bit 6" "Not occurred,Occurred"
eventfld.long 0x04 5. "[5],Transition 1->0 on data bit 5" "Not occurred,Occurred"
newline
eventfld.long 0x04 4. "[4],Transition 1->0 on data bit 4" "Not occurred,Occurred"
eventfld.long 0x04 3. "[3],Transition 1->0 on data bit 3" "Not occurred,Occurred"
eventfld.long 0x04 2. "[2],Transition 1->0 on data bit 2" "Not occurred,Occurred"
newline
eventfld.long 0x04 1. "[1],Transition 1->0 on data bit 1" "Not occurred,Occurred"
eventfld.long 0x04 0. "[0],Transition 1->0 on data bit 0" "Not occurred,Occurred"
newline
line.long 0x08 "PHY_STATUS_MASK,PHY Status Mask Register"
bitfld.long 0x08 31. "STATUS_MASK_LH[15],Status mask low-to-high bit 15" "0,1"
bitfld.long 0x08 30. "[14],Status mask low-to-high bit 14" "0,1"
bitfld.long 0x08 29. "[13],Status mask low-to-high bit 13" "0,1"
bitfld.long 0x08 28. "[12],Status mask low-to-high bit 12" "0,1"
newline
bitfld.long 0x08 27. "[11],Status mask low-to-high bit 11" "0,1"
bitfld.long 0x08 26. "[10],Status mask low-to-high bit 10" "0,1"
bitfld.long 0x08 25. "[9],Status mask low-to-high bit 9" "0,1"
bitfld.long 0x08 24. "[8],Status mask low-to-high bit 8" "0,1"
newline
bitfld.long 0x08 23. "[7],Status mask low-to-high bit 7" "0,1"
bitfld.long 0x08 22. "[6],Status mask low-to-high bit 6" "0,1"
bitfld.long 0x08 21. "[5],Status mask low-to-high bit 5" "0,1"
bitfld.long 0x08 20. "[4],Status mask low-to-high bit 4" "0,1"
newline
bitfld.long 0x08 19. "[3],Status mask low-to-high bit 3" "0,1"
bitfld.long 0x08 18. "[2],Status mask low-to-high bit 2" "0,1"
bitfld.long 0x08 17. "[1],Status mask low-to-high bit 1" "0,1"
bitfld.long 0x08 16. "[0],Status mask low-to-high bit 0" "0,1"
newline
bitfld.long 0x08 15. "STATUS_MASK_HL[15],Status mask high-to-low bit 15" "0,1"
bitfld.long 0x08 14. "[14],Status mask high-to-low bit 14" "0,1"
bitfld.long 0x08 13. "[13],Status mask high-to-low bit 13" "0,1"
bitfld.long 0x08 12. "[12],Status mask high-to-low bit 12" "0,1"
newline
bitfld.long 0x08 11. "[11],Status mask high-to-low bit 11" "0,1"
bitfld.long 0x08 10. "[10],Status mask high-to-low bit 10" "0,1"
bitfld.long 0x08 9. "[9],Status mask high-to-low bit 9" "0,1"
bitfld.long 0x08 8. "[8],Status mask high-to-low bit 8" "0,1"
newline
bitfld.long 0x08 7. "[7],Status mask high-to-low bit 7" "0,1"
bitfld.long 0x08 6. "[6],Status mask high-to-low bit 6" "0,1"
bitfld.long 0x08 5. "[5],Status mask high-to-low bit 5" "0,1"
bitfld.long 0x08 4. "[4],Status mask high-to-low bit 4" "0,1"
newline
bitfld.long 0x08 3. "[3],Status mask high-to-low bit 3" "0,1"
bitfld.long 0x08 2. "[2],Status mask high-to-low bit 2" "0,1"
bitfld.long 0x08 1. "[1],Status mask high-to-low bit 1" "0,1"
bitfld.long 0x08 0. "[0],Status mask high-to-low bit 0" "0,1"
if (((per.l(ad:0x1F8140000+0x8030))&0x400000)==0x400000)
group.long 0x8030++0x03
line.long 0x00 "PM0_MDIO_CFG,Port MAC 0 Internal MDIO Configuration Register"
rbitfld.long 0x00 31. "BSY1,MDIO busy" "Not busy,Busy"
eventfld.long 0x00 30. "CMP,MDIO command completion event" "Not occurred,Occurred"
bitfld.long 0x00 29. "CIM,MDIO command completion interrupt enable mask" "Masked,Not masked"
newline
bitfld.long 0x00 23. "NEG,MDIO drive by master on MDC negative edge" "Normal operation,Negative edge"
bitfld.long 0x00 22. "EHOLD,Extended hold" "Not extended,Extended"
rbitfld.long 0x00 16.--18. "WHOAMI,Virtual port ID" "0,1,2,3,4,5,6,7"
newline
hexmask.long.word 0x00 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor"
bitfld.long 0x00 6. "ENC45,Clause 45 support enable" "Disabled,Enabled"
bitfld.long 0x00 2.--4. "MDIO_HOLD,MDIO hold time in cycles" "1,9,17,25,33,41,49,57"
newline
rbitfld.long 0x00 1. "MDIO_RD_ER,MDIO read error" "No error,Error"
rbitfld.long 0x00 0. "BSY2,MDIO busy" "Not busy,Busy"
else
group.long 0x8030++0x03
line.long 0x00 "PM0_MDIO_CFG,Port MAC 0 Internal MDIO Configuration Register"
rbitfld.long 0x00 31. "BSY1,MDIO busy" "Not busy,Busy"
eventfld.long 0x00 30. "CMP,MDIO command completion event" "Not occurred,Occurred"
bitfld.long 0x00 29. "CIM,MDIO command completion interrupt enable mask" "Masked,Not masked"
newline
bitfld.long 0x00 23. "NEG,MDIO drive by master on MDC negative edge" "Normal operation,Negative edge"
bitfld.long 0x00 22. "EHOLD,Extended hold" "Not extended,Extended"
rbitfld.long 0x00 16.--18. "WHOAMI,Virtual port ID" "0,1,2,3,4,5,6,7"
newline
hexmask.long.word 0x00 7.--15. 1. "MDIO_CLK_DIV,MDIO clock divisor"
bitfld.long 0x00 6. "ENC45,Clause 45 support enable" "Disabled,Enabled"
bitfld.long 0x00 2.--4. "MDIO_HOLD,MDIO hold time in cycles" "1,3,5,7,9,11,13,15"
newline
rbitfld.long 0x00 1. "MDIO_RD_ER,MDIO read error" "No error,Error"
rbitfld.long 0x00 0. "BSY2,MDIO busy" "Not busy,Busy"
endif
if (((per.l(ad:0x1F8140000+0x8030))&0x40)==0x40)
group.long 0x8034++0x03
line.long 0x00 "PM0_MDIO_CTL,Port MAC 0 Internal Interface Control Register"
bitfld.long 0x00 31. "BSY,MDIO busy" "Not occurred,Occurred"
bitfld.long 0x00 15. "READ,MDIO read initiation" "Not initiated,Initiated"
newline
bitfld.long 0x00 14. "POST_INC,MDIO read with address post-increment initiation" "Not initiated,Initiated"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,MDIO port address"
newline
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,MDIO device address"
else
group.long 0x8034++0x03
line.long 0x00 "PM0_MDIO_CTL,Port MAC 0 Internal Interface Control Register"
bitfld.long 0x00 31. "BSY,MDIO busy" "Not occurred,Occurred"
bitfld.long 0x00 15. "READ,MDIO read initiation" "Not initiated,Initiated"
newline
bitfld.long 0x00 14. "POST_INC,MDIO read with address post-increment initiation" "Not initiated,Initiated"
hexmask.long.byte 0x00 5.--9. 0x20 "PORT_ADDR,PHY address"
newline
hexmask.long.byte 0x00 0.--4. 0x01 "DEV_ADDR,Register address"
endif
group.long 0x8038++0x03
line.long 0x00 "PM0_MDIO_DATA,Port MAC 0 Internal MDIO Interface Data Register"
rbitfld.long 0x00 31. "BUSY,MDIO busy bit" "Valid,Invalid"
hexmask.long.word 0x00 0.--15. 1. "MDIO_DATA,16-bit MDIO data"
wgroup.long 0x803C++0x03
line.long 0x00 "PM0_MDIO_ADDR,Port MAC 0 Internal MDIO Register Address Register"
tree.end
tree "Global Registers"
tree "ENETC_PF0_GLOBAL"
base ad:0x1F8020000
group.long 0x00++0x03
line.long 0x00 "GMR,Global mode register"
bitfld.long 0x00 1. "QUIESCE,Set the quiesce bit to stop all further processing of transmit rings and schedule pending transmit frames immediately" "Disabled,Enabled"
bitfld.long 0x00 0. "SR,Soft reset" "No reset,Reset"
rgroup.long 0xBF8++0x07
line.long 0x00 "EIPBRR0,ENETC IP Block Revision Register 0"
hexmask.long.word 0x00 16.--31. 0x01 "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 0x01 "IP_MJ,Major revision"
newline
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "EIPBRR1,ENETC IP Block Revision Register 1"
bitfld.long 0x04 17. "IP_INT[1],ENETC PCIe function 6 is enabled/present" "Disabled,Enabled"
bitfld.long 0x04 16. "IP_INT[0],ENETC PCIe function 5 is enabled/present" "Disabled,Enabled"
newline
hexmask.long.byte 0x04 8.--15. 0x01 "IP_MNT,IP block maintenance version"
hexmask.long.byte 0x04 0.--7. 0x01 "IP_CFG,IP block configuration options"
rgroup.long 0xD00++0x07
line.long 0x00 "EPFBLPR0,ENETC PF Boot Loader Parameter Register 0"
line.long 0x04 "EPFBLPR1,ENETC PF Boot Loader Parameter Register 1"
group.long 0xE20++0x07
line.long 0x00 "EUEDR,ENETC Uncorrectable Error Detect Register"
rbitfld.long 0x00 22. "PF6_MULT,Multiple error detected for PF6" "Not detected,Detected"
rbitfld.long 0x00 21. "PF5_MULT,Multiple error detected for PF5" "Not detected,Detected"
newline
rbitfld.long 0x00 20. "PF4_MULT,Multiple error detected for PF4" "Not detected,Detected"
rbitfld.long 0x00 19. "PF3_MULT,Multiple error detected for PF3" "Not detected,Detected"
newline
rbitfld.long 0x00 18. "PF2_MULT,Multiple error detected for PF2" "Not detected,Detected"
rbitfld.long 0x00 17. "PF1_MULT,Multiple error detected for PF1" "Not detected,Detected"
newline
rbitfld.long 0x00 16. "PF0_MULT,Multiple error detected for PF0" "Not detected,Detected"
eventfld.long 0x00 6. "PF6_ERR,Error detected for PF6" "No error,Error"
newline
eventfld.long 0x00 5. "PF5_ERR,Error detected for PF5" "No error,Error"
eventfld.long 0x00 4. "PF4_ERR,Error detected for PF4" "No error,Error"
newline
eventfld.long 0x00 3. "PF3_ERR,Error detected for PF3" "No error,Error"
eventfld.long 0x00 2. "PF2_ERR,Error detected for PF2" "No error,Error"
newline
eventfld.long 0x00 1. "PF1_ERR,Error detected for PF1" "No error,Error"
eventfld.long 0x00 0. "PF0_ERR,Error detected for PF0" "No error,Error"
line.long 0x04 "EUERDR,ENETC Uncorrectable Error Report Disable Register"
bitfld.long 0x00 6. "PF6_DIS,Error report disable for PF6" "No,Yes"
bitfld.long 0x00 5. "PF5_DIS,Error report disable for PF5" "No,Yes"
newline
bitfld.long 0x00 4. "PF4_DIS,Error report disable for PF4" "No,Yes"
bitfld.long 0x00 3. "PF3_DIS,Error report disable for PF3" "No,Yes"
newline
bitfld.long 0x00 2. "PF2_DIS,Error report disable for PF2" "No,Yes"
bitfld.long 0x00 1. "PF1_DIS,Error report disable for PF1" "No,Yes"
newline
bitfld.long 0x00 0. "PF0_DIS,Error report disable for PF0" "No,Yes"
rgroup.long 0xE28++0x03
line.long 0x00 "EUESR,ENETC Uncorrectable Error Syndrome Register"
hexmask.long.word 0x00 16.--31. 1. "VF,Virtual function"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xF00++0x07
line.long 0x00 "EPMMR,ENETC Performance Monitor Mode Register"
bitfld.long 0x00 0.--1. "MODE,Determines which set of performance events to monitor" "Receive/transmit ring,?..."
line.long 0x04 "EPMPMR,ENETC Performance Monitor Port Mask Register"
bitfld.long 0x04 3. "PORT_MASK[3],Exclude the port 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 2. "[2],Exclude the port 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x04 1. "[1],Exclude the port 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 0. "[0],Exclude the port 0 from monitoring" "Not excluded,Excluded"
group.long 0xF10++0x03
line.long 0x00 "EPMBDRMR,ENETC Performance Monitor BDR Mask Register 0"
bitfld.long 0x00 15. "BDR_MASK[15],Exclude the BDR 15 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 14. "[14],Exclude the BDR 14 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 13. "[13],Exclude the BDR 13 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 12. "[12],Exclude the BDR 12 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 11. "[11],Exclude the BDR 11 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 10. "[10],Exclude the BDR 10 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 9. "[9],Exclude the BDR 9 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 8. "[8],Exclude the BDR 8 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 7. "[7],Exclude the BDR 7 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 6. "[6],Exclude the BDR 6 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 5. "[5],Exclude the BDR 5 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 4. "[4],Exclude the BDR 4 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 3. "[3],Exclude the BDR 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 2. "[2],Exclude the BDR 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 1. "[1],Exclude the BDR 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 0. "[0],Exclude the BDR 0 from monitoring" "Not excluded,Excluded"
group.long 0xF20++0x07
line.long 0x00 "IRLM_AVG,Initiator Read Latency Monitor Average Register"
hexmask.long.word 0x00 8.--19. 0x01 "IRLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x00 0.--7. 1. "IRLM_AVG_FRACT,Fractional portion of the measured average latency value"
line.long 0x04 "IWLM_AVG,Initiator Write Latency Monitor Average Register"
hexmask.long.word 0x04 8.--19. 0x01 "IWLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x04 0.--7. 1. "IWLM_AVG_FRACT,Fractional portion of the measured average latency value"
tree.end
tree "ENETC_PF1_GLOBAL"
base ad:0x1F8060000
group.long 0x00++0x03
line.long 0x00 "GMR,Global mode register"
bitfld.long 0x00 1. "QUIESCE,Set the quiesce bit to stop all further processing of transmit rings and schedule pending transmit frames immediately" "Disabled,Enabled"
bitfld.long 0x00 0. "SR,Soft reset" "No reset,Reset"
rgroup.long 0xBF8++0x07
line.long 0x00 "EIPBRR0,ENETC IP Block Revision Register 0"
hexmask.long.word 0x00 16.--31. 0x01 "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 0x01 "IP_MJ,Major revision"
newline
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "EIPBRR1,ENETC IP Block Revision Register 1"
bitfld.long 0x04 17. "IP_INT[1],ENETC PCIe function 6 is enabled/present" "Disabled,Enabled"
bitfld.long 0x04 16. "IP_INT[0],ENETC PCIe function 5 is enabled/present" "Disabled,Enabled"
newline
hexmask.long.byte 0x04 8.--15. 0x01 "IP_MNT,IP block maintenance version"
hexmask.long.byte 0x04 0.--7. 0x01 "IP_CFG,IP block configuration options"
rgroup.long 0xD00++0x07
line.long 0x00 "EPFBLPR0,ENETC PF Boot Loader Parameter Register 0"
line.long 0x04 "EPFBLPR1,ENETC PF Boot Loader Parameter Register 1"
group.long 0xE20++0x07
line.long 0x00 "EUEDR,ENETC Uncorrectable Error Detect Register"
rbitfld.long 0x00 22. "PF6_MULT,Multiple error detected for PF6" "Not detected,Detected"
rbitfld.long 0x00 21. "PF5_MULT,Multiple error detected for PF5" "Not detected,Detected"
newline
rbitfld.long 0x00 20. "PF4_MULT,Multiple error detected for PF4" "Not detected,Detected"
rbitfld.long 0x00 19. "PF3_MULT,Multiple error detected for PF3" "Not detected,Detected"
newline
rbitfld.long 0x00 18. "PF2_MULT,Multiple error detected for PF2" "Not detected,Detected"
rbitfld.long 0x00 17. "PF1_MULT,Multiple error detected for PF1" "Not detected,Detected"
newline
rbitfld.long 0x00 16. "PF0_MULT,Multiple error detected for PF0" "Not detected,Detected"
eventfld.long 0x00 6. "PF6_ERR,Error detected for PF6" "No error,Error"
newline
eventfld.long 0x00 5. "PF5_ERR,Error detected for PF5" "No error,Error"
eventfld.long 0x00 4. "PF4_ERR,Error detected for PF4" "No error,Error"
newline
eventfld.long 0x00 3. "PF3_ERR,Error detected for PF3" "No error,Error"
eventfld.long 0x00 2. "PF2_ERR,Error detected for PF2" "No error,Error"
newline
eventfld.long 0x00 1. "PF1_ERR,Error detected for PF1" "No error,Error"
eventfld.long 0x00 0. "PF0_ERR,Error detected for PF0" "No error,Error"
line.long 0x04 "EUERDR,ENETC Uncorrectable Error Report Disable Register"
bitfld.long 0x00 6. "PF6_DIS,Error report disable for PF6" "No,Yes"
bitfld.long 0x00 5. "PF5_DIS,Error report disable for PF5" "No,Yes"
newline
bitfld.long 0x00 4. "PF4_DIS,Error report disable for PF4" "No,Yes"
bitfld.long 0x00 3. "PF3_DIS,Error report disable for PF3" "No,Yes"
newline
bitfld.long 0x00 2. "PF2_DIS,Error report disable for PF2" "No,Yes"
bitfld.long 0x00 1. "PF1_DIS,Error report disable for PF1" "No,Yes"
newline
bitfld.long 0x00 0. "PF0_DIS,Error report disable for PF0" "No,Yes"
rgroup.long 0xE28++0x03
line.long 0x00 "EUESR,ENETC Uncorrectable Error Syndrome Register"
hexmask.long.word 0x00 16.--31. 1. "VF,Virtual function"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xF00++0x07
line.long 0x00 "EPMMR,ENETC Performance Monitor Mode Register"
bitfld.long 0x00 0.--1. "MODE,Determines which set of performance events to monitor" "Receive/transmit ring,?..."
line.long 0x04 "EPMPMR,ENETC Performance Monitor Port Mask Register"
bitfld.long 0x04 3. "PORT_MASK[3],Exclude the port 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 2. "[2],Exclude the port 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x04 1. "[1],Exclude the port 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 0. "[0],Exclude the port 0 from monitoring" "Not excluded,Excluded"
group.long 0xF10++0x03
line.long 0x00 "EPMBDRMR,ENETC Performance Monitor BDR Mask Register 0"
bitfld.long 0x00 15. "BDR_MASK[15],Exclude the BDR 15 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 14. "[14],Exclude the BDR 14 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 13. "[13],Exclude the BDR 13 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 12. "[12],Exclude the BDR 12 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 11. "[11],Exclude the BDR 11 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 10. "[10],Exclude the BDR 10 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 9. "[9],Exclude the BDR 9 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 8. "[8],Exclude the BDR 8 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 7. "[7],Exclude the BDR 7 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 6. "[6],Exclude the BDR 6 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 5. "[5],Exclude the BDR 5 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 4. "[4],Exclude the BDR 4 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 3. "[3],Exclude the BDR 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 2. "[2],Exclude the BDR 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 1. "[1],Exclude the BDR 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 0. "[0],Exclude the BDR 0 from monitoring" "Not excluded,Excluded"
group.long 0xF20++0x07
line.long 0x00 "IRLM_AVG,Initiator Read Latency Monitor Average Register"
hexmask.long.word 0x00 8.--19. 0x01 "IRLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x00 0.--7. 1. "IRLM_AVG_FRACT,Fractional portion of the measured average latency value"
line.long 0x04 "IWLM_AVG,Initiator Write Latency Monitor Average Register"
hexmask.long.word 0x04 8.--19. 0x01 "IWLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x04 0.--7. 1. "IWLM_AVG_FRACT,Fractional portion of the measured average latency value"
tree.end
tree "ENETC_PF2_GLOBAL"
base ad:0x1F80A0000
group.long 0x00++0x03
line.long 0x00 "GMR,Global mode register"
bitfld.long 0x00 1. "QUIESCE,Set the quiesce bit to stop all further processing of transmit rings and schedule pending transmit frames immediately" "Disabled,Enabled"
bitfld.long 0x00 0. "SR,Soft reset" "No reset,Reset"
rgroup.long 0xBF8++0x07
line.long 0x00 "EIPBRR0,ENETC IP Block Revision Register 0"
hexmask.long.word 0x00 16.--31. 0x01 "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 0x01 "IP_MJ,Major revision"
newline
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "EIPBRR1,ENETC IP Block Revision Register 1"
bitfld.long 0x04 17. "IP_INT[1],ENETC PCIe function 6 is enabled/present" "Disabled,Enabled"
bitfld.long 0x04 16. "IP_INT[0],ENETC PCIe function 5 is enabled/present" "Disabled,Enabled"
newline
hexmask.long.byte 0x04 8.--15. 0x01 "IP_MNT,IP block maintenance version"
hexmask.long.byte 0x04 0.--7. 0x01 "IP_CFG,IP block configuration options"
rgroup.long 0xD00++0x07
line.long 0x00 "EPFBLPR0,ENETC PF Boot Loader Parameter Register 0"
line.long 0x04 "EPFBLPR1,ENETC PF Boot Loader Parameter Register 1"
group.long 0xE20++0x07
line.long 0x00 "EUEDR,ENETC Uncorrectable Error Detect Register"
rbitfld.long 0x00 22. "PF6_MULT,Multiple error detected for PF6" "Not detected,Detected"
rbitfld.long 0x00 21. "PF5_MULT,Multiple error detected for PF5" "Not detected,Detected"
newline
rbitfld.long 0x00 20. "PF4_MULT,Multiple error detected for PF4" "Not detected,Detected"
rbitfld.long 0x00 19. "PF3_MULT,Multiple error detected for PF3" "Not detected,Detected"
newline
rbitfld.long 0x00 18. "PF2_MULT,Multiple error detected for PF2" "Not detected,Detected"
rbitfld.long 0x00 17. "PF1_MULT,Multiple error detected for PF1" "Not detected,Detected"
newline
rbitfld.long 0x00 16. "PF0_MULT,Multiple error detected for PF0" "Not detected,Detected"
eventfld.long 0x00 6. "PF6_ERR,Error detected for PF6" "No error,Error"
newline
eventfld.long 0x00 5. "PF5_ERR,Error detected for PF5" "No error,Error"
eventfld.long 0x00 4. "PF4_ERR,Error detected for PF4" "No error,Error"
newline
eventfld.long 0x00 3. "PF3_ERR,Error detected for PF3" "No error,Error"
eventfld.long 0x00 2. "PF2_ERR,Error detected for PF2" "No error,Error"
newline
eventfld.long 0x00 1. "PF1_ERR,Error detected for PF1" "No error,Error"
eventfld.long 0x00 0. "PF0_ERR,Error detected for PF0" "No error,Error"
line.long 0x04 "EUERDR,ENETC Uncorrectable Error Report Disable Register"
bitfld.long 0x00 6. "PF6_DIS,Error report disable for PF6" "No,Yes"
bitfld.long 0x00 5. "PF5_DIS,Error report disable for PF5" "No,Yes"
newline
bitfld.long 0x00 4. "PF4_DIS,Error report disable for PF4" "No,Yes"
bitfld.long 0x00 3. "PF3_DIS,Error report disable for PF3" "No,Yes"
newline
bitfld.long 0x00 2. "PF2_DIS,Error report disable for PF2" "No,Yes"
bitfld.long 0x00 1. "PF1_DIS,Error report disable for PF1" "No,Yes"
newline
bitfld.long 0x00 0. "PF0_DIS,Error report disable for PF0" "No,Yes"
rgroup.long 0xE28++0x03
line.long 0x00 "EUESR,ENETC Uncorrectable Error Syndrome Register"
hexmask.long.word 0x00 16.--31. 1. "VF,Virtual function"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xF00++0x07
line.long 0x00 "EPMMR,ENETC Performance Monitor Mode Register"
bitfld.long 0x00 0.--1. "MODE,Determines which set of performance events to monitor" "Receive/transmit ring,?..."
line.long 0x04 "EPMPMR,ENETC Performance Monitor Port Mask Register"
bitfld.long 0x04 3. "PORT_MASK[3],Exclude the port 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 2. "[2],Exclude the port 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x04 1. "[1],Exclude the port 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 0. "[0],Exclude the port 0 from monitoring" "Not excluded,Excluded"
group.long 0xF10++0x03
line.long 0x00 "EPMBDRMR,ENETC Performance Monitor BDR Mask Register 0"
bitfld.long 0x00 15. "BDR_MASK[15],Exclude the BDR 15 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 14. "[14],Exclude the BDR 14 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 13. "[13],Exclude the BDR 13 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 12. "[12],Exclude the BDR 12 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 11. "[11],Exclude the BDR 11 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 10. "[10],Exclude the BDR 10 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 9. "[9],Exclude the BDR 9 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 8. "[8],Exclude the BDR 8 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 7. "[7],Exclude the BDR 7 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 6. "[6],Exclude the BDR 6 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 5. "[5],Exclude the BDR 5 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 4. "[4],Exclude the BDR 4 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 3. "[3],Exclude the BDR 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 2. "[2],Exclude the BDR 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 1. "[1],Exclude the BDR 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 0. "[0],Exclude the BDR 0 from monitoring" "Not excluded,Excluded"
group.long 0xF20++0x07
line.long 0x00 "IRLM_AVG,Initiator Read Latency Monitor Average Register"
hexmask.long.word 0x00 8.--19. 0x01 "IRLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x00 0.--7. 1. "IRLM_AVG_FRACT,Fractional portion of the measured average latency value"
line.long 0x04 "IWLM_AVG,Initiator Write Latency Monitor Average Register"
hexmask.long.word 0x04 8.--19. 0x01 "IWLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x04 0.--7. 1. "IWLM_AVG_FRACT,Fractional portion of the measured average latency value"
tree.end
tree "ENETC_PF3_GLOBAL"
base ad:0x1F8120000
group.long 0x00++0x03
line.long 0x00 "GMR,Global mode register"
bitfld.long 0x00 1. "QUIESCE,Set the quiesce bit to stop all further processing of transmit rings and schedule pending transmit frames immediately" "Disabled,Enabled"
bitfld.long 0x00 0. "SR,Soft reset" "No reset,Reset"
rgroup.long 0xBF8++0x07
line.long 0x00 "EIPBRR0,ENETC IP Block Revision Register 0"
hexmask.long.word 0x00 16.--31. 0x01 "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 0x01 "IP_MJ,Major revision"
newline
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "EIPBRR1,ENETC IP Block Revision Register 1"
bitfld.long 0x04 17. "IP_INT[1],ENETC PCIe function 6 is enabled/present" "Disabled,Enabled"
bitfld.long 0x04 16. "IP_INT[0],ENETC PCIe function 5 is enabled/present" "Disabled,Enabled"
newline
hexmask.long.byte 0x04 8.--15. 0x01 "IP_MNT,IP block maintenance version"
hexmask.long.byte 0x04 0.--7. 0x01 "IP_CFG,IP block configuration options"
rgroup.long 0xD00++0x07
line.long 0x00 "EPFBLPR0,ENETC PF Boot Loader Parameter Register 0"
line.long 0x04 "EPFBLPR1,ENETC PF Boot Loader Parameter Register 1"
group.long 0xE20++0x07
line.long 0x00 "EUEDR,ENETC Uncorrectable Error Detect Register"
rbitfld.long 0x00 22. "PF6_MULT,Multiple error detected for PF6" "Not detected,Detected"
rbitfld.long 0x00 21. "PF5_MULT,Multiple error detected for PF5" "Not detected,Detected"
newline
rbitfld.long 0x00 20. "PF4_MULT,Multiple error detected for PF4" "Not detected,Detected"
rbitfld.long 0x00 19. "PF3_MULT,Multiple error detected for PF3" "Not detected,Detected"
newline
rbitfld.long 0x00 18. "PF2_MULT,Multiple error detected for PF2" "Not detected,Detected"
rbitfld.long 0x00 17. "PF1_MULT,Multiple error detected for PF1" "Not detected,Detected"
newline
rbitfld.long 0x00 16. "PF0_MULT,Multiple error detected for PF0" "Not detected,Detected"
eventfld.long 0x00 6. "PF6_ERR,Error detected for PF6" "No error,Error"
newline
eventfld.long 0x00 5. "PF5_ERR,Error detected for PF5" "No error,Error"
eventfld.long 0x00 4. "PF4_ERR,Error detected for PF4" "No error,Error"
newline
eventfld.long 0x00 3. "PF3_ERR,Error detected for PF3" "No error,Error"
eventfld.long 0x00 2. "PF2_ERR,Error detected for PF2" "No error,Error"
newline
eventfld.long 0x00 1. "PF1_ERR,Error detected for PF1" "No error,Error"
eventfld.long 0x00 0. "PF0_ERR,Error detected for PF0" "No error,Error"
line.long 0x04 "EUERDR,ENETC Uncorrectable Error Report Disable Register"
bitfld.long 0x00 6. "PF6_DIS,Error report disable for PF6" "No,Yes"
bitfld.long 0x00 5. "PF5_DIS,Error report disable for PF5" "No,Yes"
newline
bitfld.long 0x00 4. "PF4_DIS,Error report disable for PF4" "No,Yes"
bitfld.long 0x00 3. "PF3_DIS,Error report disable for PF3" "No,Yes"
newline
bitfld.long 0x00 2. "PF2_DIS,Error report disable for PF2" "No,Yes"
bitfld.long 0x00 1. "PF1_DIS,Error report disable for PF1" "No,Yes"
newline
bitfld.long 0x00 0. "PF0_DIS,Error report disable for PF0" "No,Yes"
rgroup.long 0xE28++0x03
line.long 0x00 "EUESR,ENETC Uncorrectable Error Syndrome Register"
hexmask.long.word 0x00 16.--31. 1. "VF,Virtual function"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xF00++0x07
line.long 0x00 "EPMMR,ENETC Performance Monitor Mode Register"
bitfld.long 0x00 0.--1. "MODE,Determines which set of performance events to monitor" "Receive/transmit ring,?..."
line.long 0x04 "EPMPMR,ENETC Performance Monitor Port Mask Register"
bitfld.long 0x04 3. "PORT_MASK[3],Exclude the port 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 2. "[2],Exclude the port 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x04 1. "[1],Exclude the port 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 0. "[0],Exclude the port 0 from monitoring" "Not excluded,Excluded"
group.long 0xF10++0x03
line.long 0x00 "EPMBDRMR,ENETC Performance Monitor BDR Mask Register 0"
bitfld.long 0x00 15. "BDR_MASK[15],Exclude the BDR 15 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 14. "[14],Exclude the BDR 14 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 13. "[13],Exclude the BDR 13 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 12. "[12],Exclude the BDR 12 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 11. "[11],Exclude the BDR 11 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 10. "[10],Exclude the BDR 10 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 9. "[9],Exclude the BDR 9 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 8. "[8],Exclude the BDR 8 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 7. "[7],Exclude the BDR 7 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 6. "[6],Exclude the BDR 6 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 5. "[5],Exclude the BDR 5 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 4. "[4],Exclude the BDR 4 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 3. "[3],Exclude the BDR 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 2. "[2],Exclude the BDR 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 1. "[1],Exclude the BDR 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 0. "[0],Exclude the BDR 0 from monitoring" "Not excluded,Excluded"
group.long 0xF20++0x07
line.long 0x00 "IRLM_AVG,Initiator Read Latency Monitor Average Register"
hexmask.long.word 0x00 8.--19. 0x01 "IRLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x00 0.--7. 1. "IRLM_AVG_FRACT,Fractional portion of the measured average latency value"
line.long 0x04 "IWLM_AVG,Initiator Write Latency Monitor Average Register"
hexmask.long.word 0x04 8.--19. 0x01 "IWLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x04 0.--7. 1. "IWLM_AVG_FRACT,Fractional portion of the measured average latency value"
tree.end
tree "ENETC_PF4_GLOBAL"
base ad:0x1F8140000
group.long 0x00++0x03
line.long 0x00 "GMR,Global mode register"
bitfld.long 0x00 1. "QUIESCE,Set the quiesce bit to stop all further processing of transmit rings and schedule pending transmit frames immediately" "Disabled,Enabled"
bitfld.long 0x00 0. "SR,Soft reset" "No reset,Reset"
rgroup.long 0xBF8++0x07
line.long 0x00 "EIPBRR0,ENETC IP Block Revision Register 0"
hexmask.long.word 0x00 16.--31. 0x01 "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 0x01 "IP_MJ,Major revision"
newline
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "EIPBRR1,ENETC IP Block Revision Register 1"
bitfld.long 0x04 17. "IP_INT[1],ENETC PCIe function 6 is enabled/present" "Disabled,Enabled"
bitfld.long 0x04 16. "IP_INT[0],ENETC PCIe function 5 is enabled/present" "Disabled,Enabled"
newline
hexmask.long.byte 0x04 8.--15. 0x01 "IP_MNT,IP block maintenance version"
hexmask.long.byte 0x04 0.--7. 0x01 "IP_CFG,IP block configuration options"
rgroup.long 0xD00++0x07
line.long 0x00 "EPFBLPR0,ENETC PF Boot Loader Parameter Register 0"
line.long 0x04 "EPFBLPR1,ENETC PF Boot Loader Parameter Register 1"
group.long 0xE20++0x07
line.long 0x00 "EUEDR,ENETC Uncorrectable Error Detect Register"
rbitfld.long 0x00 22. "PF6_MULT,Multiple error detected for PF6" "Not detected,Detected"
rbitfld.long 0x00 21. "PF5_MULT,Multiple error detected for PF5" "Not detected,Detected"
newline
rbitfld.long 0x00 20. "PF4_MULT,Multiple error detected for PF4" "Not detected,Detected"
rbitfld.long 0x00 19. "PF3_MULT,Multiple error detected for PF3" "Not detected,Detected"
newline
rbitfld.long 0x00 18. "PF2_MULT,Multiple error detected for PF2" "Not detected,Detected"
rbitfld.long 0x00 17. "PF1_MULT,Multiple error detected for PF1" "Not detected,Detected"
newline
rbitfld.long 0x00 16. "PF0_MULT,Multiple error detected for PF0" "Not detected,Detected"
eventfld.long 0x00 6. "PF6_ERR,Error detected for PF6" "No error,Error"
newline
eventfld.long 0x00 5. "PF5_ERR,Error detected for PF5" "No error,Error"
eventfld.long 0x00 4. "PF4_ERR,Error detected for PF4" "No error,Error"
newline
eventfld.long 0x00 3. "PF3_ERR,Error detected for PF3" "No error,Error"
eventfld.long 0x00 2. "PF2_ERR,Error detected for PF2" "No error,Error"
newline
eventfld.long 0x00 1. "PF1_ERR,Error detected for PF1" "No error,Error"
eventfld.long 0x00 0. "PF0_ERR,Error detected for PF0" "No error,Error"
line.long 0x04 "EUERDR,ENETC Uncorrectable Error Report Disable Register"
bitfld.long 0x00 6. "PF6_DIS,Error report disable for PF6" "No,Yes"
bitfld.long 0x00 5. "PF5_DIS,Error report disable for PF5" "No,Yes"
newline
bitfld.long 0x00 4. "PF4_DIS,Error report disable for PF4" "No,Yes"
bitfld.long 0x00 3. "PF3_DIS,Error report disable for PF3" "No,Yes"
newline
bitfld.long 0x00 2. "PF2_DIS,Error report disable for PF2" "No,Yes"
bitfld.long 0x00 1. "PF1_DIS,Error report disable for PF1" "No,Yes"
newline
bitfld.long 0x00 0. "PF0_DIS,Error report disable for PF0" "No,Yes"
rgroup.long 0xE28++0x03
line.long 0x00 "EUESR,ENETC Uncorrectable Error Syndrome Register"
hexmask.long.word 0x00 16.--31. 1. "VF,Virtual function"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xF00++0x07
line.long 0x00 "EPMMR,ENETC Performance Monitor Mode Register"
bitfld.long 0x00 0.--1. "MODE,Determines which set of performance events to monitor" "Receive/transmit ring,?..."
line.long 0x04 "EPMPMR,ENETC Performance Monitor Port Mask Register"
bitfld.long 0x04 3. "PORT_MASK[3],Exclude the port 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 2. "[2],Exclude the port 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x04 1. "[1],Exclude the port 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 0. "[0],Exclude the port 0 from monitoring" "Not excluded,Excluded"
group.long 0xF10++0x03
line.long 0x00 "EPMBDRMR,ENETC Performance Monitor BDR Mask Register 0"
bitfld.long 0x00 15. "BDR_MASK[15],Exclude the BDR 15 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 14. "[14],Exclude the BDR 14 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 13. "[13],Exclude the BDR 13 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 12. "[12],Exclude the BDR 12 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 11. "[11],Exclude the BDR 11 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 10. "[10],Exclude the BDR 10 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 9. "[9],Exclude the BDR 9 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 8. "[8],Exclude the BDR 8 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 7. "[7],Exclude the BDR 7 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 6. "[6],Exclude the BDR 6 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 5. "[5],Exclude the BDR 5 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 4. "[4],Exclude the BDR 4 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 3. "[3],Exclude the BDR 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 2. "[2],Exclude the BDR 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 1. "[1],Exclude the BDR 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 0. "[0],Exclude the BDR 0 from monitoring" "Not excluded,Excluded"
group.long 0xF20++0x07
line.long 0x00 "IRLM_AVG,Initiator Read Latency Monitor Average Register"
hexmask.long.word 0x00 8.--19. 0x01 "IRLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x00 0.--7. 1. "IRLM_AVG_FRACT,Fractional portion of the measured average latency value"
line.long 0x04 "IWLM_AVG,Initiator Write Latency Monitor Average Register"
hexmask.long.word 0x04 8.--19. 0x01 "IWLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x04 0.--7. 1. "IWLM_AVG_FRACT,Fractional portion of the measured average latency value"
tree.end
tree "ENETC_PF5_GLOBAL"
base ad:0x1F8160000
group.long 0x00++0x03
line.long 0x00 "GMR,Global mode register"
bitfld.long 0x00 1. "QUIESCE,Set the quiesce bit to stop all further processing of transmit rings and schedule pending transmit frames immediately" "Disabled,Enabled"
bitfld.long 0x00 0. "SR,Soft reset" "No reset,Reset"
rgroup.long 0xBF8++0x07
line.long 0x00 "EIPBRR0,ENETC IP Block Revision Register 0"
hexmask.long.word 0x00 16.--31. 0x01 "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 0x01 "IP_MJ,Major revision"
newline
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "EIPBRR1,ENETC IP Block Revision Register 1"
bitfld.long 0x04 17. "IP_INT[1],ENETC PCIe function 6 is enabled/present" "Disabled,Enabled"
bitfld.long 0x04 16. "IP_INT[0],ENETC PCIe function 5 is enabled/present" "Disabled,Enabled"
newline
hexmask.long.byte 0x04 8.--15. 0x01 "IP_MNT,IP block maintenance version"
hexmask.long.byte 0x04 0.--7. 0x01 "IP_CFG,IP block configuration options"
rgroup.long 0xD00++0x07
line.long 0x00 "EPFBLPR0,ENETC PF Boot Loader Parameter Register 0"
line.long 0x04 "EPFBLPR1,ENETC PF Boot Loader Parameter Register 1"
group.long 0xE20++0x07
line.long 0x00 "EUEDR,ENETC Uncorrectable Error Detect Register"
rbitfld.long 0x00 22. "PF6_MULT,Multiple error detected for PF6" "Not detected,Detected"
rbitfld.long 0x00 21. "PF5_MULT,Multiple error detected for PF5" "Not detected,Detected"
newline
rbitfld.long 0x00 20. "PF4_MULT,Multiple error detected for PF4" "Not detected,Detected"
rbitfld.long 0x00 19. "PF3_MULT,Multiple error detected for PF3" "Not detected,Detected"
newline
rbitfld.long 0x00 18. "PF2_MULT,Multiple error detected for PF2" "Not detected,Detected"
rbitfld.long 0x00 17. "PF1_MULT,Multiple error detected for PF1" "Not detected,Detected"
newline
rbitfld.long 0x00 16. "PF0_MULT,Multiple error detected for PF0" "Not detected,Detected"
eventfld.long 0x00 6. "PF6_ERR,Error detected for PF6" "No error,Error"
newline
eventfld.long 0x00 5. "PF5_ERR,Error detected for PF5" "No error,Error"
eventfld.long 0x00 4. "PF4_ERR,Error detected for PF4" "No error,Error"
newline
eventfld.long 0x00 3. "PF3_ERR,Error detected for PF3" "No error,Error"
eventfld.long 0x00 2. "PF2_ERR,Error detected for PF2" "No error,Error"
newline
eventfld.long 0x00 1. "PF1_ERR,Error detected for PF1" "No error,Error"
eventfld.long 0x00 0. "PF0_ERR,Error detected for PF0" "No error,Error"
line.long 0x04 "EUERDR,ENETC Uncorrectable Error Report Disable Register"
bitfld.long 0x00 6. "PF6_DIS,Error report disable for PF6" "No,Yes"
bitfld.long 0x00 5. "PF5_DIS,Error report disable for PF5" "No,Yes"
newline
bitfld.long 0x00 4. "PF4_DIS,Error report disable for PF4" "No,Yes"
bitfld.long 0x00 3. "PF3_DIS,Error report disable for PF3" "No,Yes"
newline
bitfld.long 0x00 2. "PF2_DIS,Error report disable for PF2" "No,Yes"
bitfld.long 0x00 1. "PF1_DIS,Error report disable for PF1" "No,Yes"
newline
bitfld.long 0x00 0. "PF0_DIS,Error report disable for PF0" "No,Yes"
rgroup.long 0xE28++0x03
line.long 0x00 "EUESR,ENETC Uncorrectable Error Syndrome Register"
hexmask.long.word 0x00 16.--31. 1. "VF,Virtual function"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xF00++0x07
line.long 0x00 "EPMMR,ENETC Performance Monitor Mode Register"
bitfld.long 0x00 0.--1. "MODE,Determines which set of performance events to monitor" "Receive/transmit ring,?..."
line.long 0x04 "EPMPMR,ENETC Performance Monitor Port Mask Register"
bitfld.long 0x04 3. "PORT_MASK[3],Exclude the port 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 2. "[2],Exclude the port 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x04 1. "[1],Exclude the port 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 0. "[0],Exclude the port 0 from monitoring" "Not excluded,Excluded"
group.long 0xF10++0x03
line.long 0x00 "EPMBDRMR,ENETC Performance Monitor BDR Mask Register 0"
bitfld.long 0x00 15. "BDR_MASK[15],Exclude the BDR 15 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 14. "[14],Exclude the BDR 14 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 13. "[13],Exclude the BDR 13 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 12. "[12],Exclude the BDR 12 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 11. "[11],Exclude the BDR 11 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 10. "[10],Exclude the BDR 10 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 9. "[9],Exclude the BDR 9 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 8. "[8],Exclude the BDR 8 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 7. "[7],Exclude the BDR 7 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 6. "[6],Exclude the BDR 6 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 5. "[5],Exclude the BDR 5 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 4. "[4],Exclude the BDR 4 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 3. "[3],Exclude the BDR 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 2. "[2],Exclude the BDR 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 1. "[1],Exclude the BDR 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 0. "[0],Exclude the BDR 0 from monitoring" "Not excluded,Excluded"
group.long 0xF20++0x07
line.long 0x00 "IRLM_AVG,Initiator Read Latency Monitor Average Register"
hexmask.long.word 0x00 8.--19. 0x01 "IRLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x00 0.--7. 1. "IRLM_AVG_FRACT,Fractional portion of the measured average latency value"
line.long 0x04 "IWLM_AVG,Initiator Write Latency Monitor Average Register"
hexmask.long.word 0x04 8.--19. 0x01 "IWLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x04 0.--7. 1. "IWLM_AVG_FRACT,Fractional portion of the measured average latency value"
tree.end
tree "ENETC_PF6_GLOBAL"
base ad:0x1F80E0000
group.long 0x00++0x03
line.long 0x00 "GMR,Global mode register"
bitfld.long 0x00 1. "QUIESCE,Set the quiesce bit to stop all further processing of transmit rings and schedule pending transmit frames immediately" "Disabled,Enabled"
bitfld.long 0x00 0. "SR,Soft reset" "No reset,Reset"
rgroup.long 0xBF8++0x07
line.long 0x00 "EIPBRR0,ENETC IP Block Revision Register 0"
hexmask.long.word 0x00 16.--31. 0x01 "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 0x01 "IP_MJ,Major revision"
newline
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "EIPBRR1,ENETC IP Block Revision Register 1"
bitfld.long 0x04 17. "IP_INT[1],ENETC PCIe function 6 is enabled/present" "Disabled,Enabled"
bitfld.long 0x04 16. "IP_INT[0],ENETC PCIe function 5 is enabled/present" "Disabled,Enabled"
newline
hexmask.long.byte 0x04 8.--15. 0x01 "IP_MNT,IP block maintenance version"
hexmask.long.byte 0x04 0.--7. 0x01 "IP_CFG,IP block configuration options"
rgroup.long 0xD00++0x07
line.long 0x00 "EPFBLPR0,ENETC PF Boot Loader Parameter Register 0"
line.long 0x04 "EPFBLPR1,ENETC PF Boot Loader Parameter Register 1"
group.long 0xE20++0x07
line.long 0x00 "EUEDR,ENETC Uncorrectable Error Detect Register"
rbitfld.long 0x00 22. "PF6_MULT,Multiple error detected for PF6" "Not detected,Detected"
rbitfld.long 0x00 21. "PF5_MULT,Multiple error detected for PF5" "Not detected,Detected"
newline
rbitfld.long 0x00 20. "PF4_MULT,Multiple error detected for PF4" "Not detected,Detected"
rbitfld.long 0x00 19. "PF3_MULT,Multiple error detected for PF3" "Not detected,Detected"
newline
rbitfld.long 0x00 18. "PF2_MULT,Multiple error detected for PF2" "Not detected,Detected"
rbitfld.long 0x00 17. "PF1_MULT,Multiple error detected for PF1" "Not detected,Detected"
newline
rbitfld.long 0x00 16. "PF0_MULT,Multiple error detected for PF0" "Not detected,Detected"
eventfld.long 0x00 6. "PF6_ERR,Error detected for PF6" "No error,Error"
newline
eventfld.long 0x00 5. "PF5_ERR,Error detected for PF5" "No error,Error"
eventfld.long 0x00 4. "PF4_ERR,Error detected for PF4" "No error,Error"
newline
eventfld.long 0x00 3. "PF3_ERR,Error detected for PF3" "No error,Error"
eventfld.long 0x00 2. "PF2_ERR,Error detected for PF2" "No error,Error"
newline
eventfld.long 0x00 1. "PF1_ERR,Error detected for PF1" "No error,Error"
eventfld.long 0x00 0. "PF0_ERR,Error detected for PF0" "No error,Error"
line.long 0x04 "EUERDR,ENETC Uncorrectable Error Report Disable Register"
bitfld.long 0x00 6. "PF6_DIS,Error report disable for PF6" "No,Yes"
bitfld.long 0x00 5. "PF5_DIS,Error report disable for PF5" "No,Yes"
newline
bitfld.long 0x00 4. "PF4_DIS,Error report disable for PF4" "No,Yes"
bitfld.long 0x00 3. "PF3_DIS,Error report disable for PF3" "No,Yes"
newline
bitfld.long 0x00 2. "PF2_DIS,Error report disable for PF2" "No,Yes"
bitfld.long 0x00 1. "PF1_DIS,Error report disable for PF1" "No,Yes"
newline
bitfld.long 0x00 0. "PF0_DIS,Error report disable for PF0" "No,Yes"
rgroup.long 0xE28++0x03
line.long 0x00 "EUESR,ENETC Uncorrectable Error Syndrome Register"
hexmask.long.word 0x00 16.--31. 1. "VF,Virtual function"
hexmask.long.word 0x00 0.--15. 1. "SOURCE_ID,Source identifier"
group.long 0xF00++0x07
line.long 0x00 "EPMMR,ENETC Performance Monitor Mode Register"
bitfld.long 0x00 0.--1. "MODE,Determines which set of performance events to monitor" "Receive/transmit ring,?..."
line.long 0x04 "EPMPMR,ENETC Performance Monitor Port Mask Register"
bitfld.long 0x04 3. "PORT_MASK[3],Exclude the port 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 2. "[2],Exclude the port 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x04 1. "[1],Exclude the port 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x04 0. "[0],Exclude the port 0 from monitoring" "Not excluded,Excluded"
group.long 0xF10++0x03
line.long 0x00 "EPMBDRMR,ENETC Performance Monitor BDR Mask Register 0"
bitfld.long 0x00 15. "BDR_MASK[15],Exclude the BDR 15 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 14. "[14],Exclude the BDR 14 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 13. "[13],Exclude the BDR 13 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 12. "[12],Exclude the BDR 12 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 11. "[11],Exclude the BDR 11 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 10. "[10],Exclude the BDR 10 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 9. "[9],Exclude the BDR 9 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 8. "[8],Exclude the BDR 8 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 7. "[7],Exclude the BDR 7 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 6. "[6],Exclude the BDR 6 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 5. "[5],Exclude the BDR 5 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 4. "[4],Exclude the BDR 4 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 3. "[3],Exclude the BDR 3 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 2. "[2],Exclude the BDR 2 from monitoring" "Not excluded,Excluded"
newline
bitfld.long 0x00 1. "[1],Exclude the BDR 1 from monitoring" "Not excluded,Excluded"
bitfld.long 0x00 0. "[0],Exclude the BDR 0 from monitoring" "Not excluded,Excluded"
group.long 0xF20++0x07
line.long 0x00 "IRLM_AVG,Initiator Read Latency Monitor Average Register"
hexmask.long.word 0x00 8.--19. 0x01 "IRLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x00 0.--7. 1. "IRLM_AVG_FRACT,Fractional portion of the measured average latency value"
line.long 0x04 "IWLM_AVG,Initiator Write Latency Monitor Average Register"
hexmask.long.word 0x04 8.--19. 0x01 "IWLM_AVG_INT,Integer portion of the measured average latency value"
hexmask.long.byte 0x04 0.--7. 1. "IWLM_AVG_FRACT,Fractional portion of the measured average latency value"
tree.end
tree.end
tree.end
tree "TSN (TSN-Capable Ethernet Switch)"
base ad:0x1FC000000
tree "ANA"
base ad:0x1FC000000+0x280000
base ad:0x1FC000000+0x280000+0x89A0
tree "ES_ANA_ANA Registers"
group.long 0x00++0x07
line.long 0x00 "ADVLEARN,Advanced Learning Setup Register"
bitfld.long 0x00 6. "VLAN_CHK,VLAN check" "Low,High"
bitfld.long 0x00 0.--5. "LEARN_MIRROR,Learn mirror" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "VLANMASK,VLAN Source Port Mask Register"
hexmask.long.byte 0x04 0.--6. 1. "VLANMASK,Requiring VLAN ingress filtering mask"
group.long 0x0C++0x0B
line.long 0x00 "ANAGEFIL,Aging Filter Register"
bitfld.long 0x00 20. "AGE_LOCKED,Age locked" "Unlocked,Locked"
bitfld.long 0x00 19. "PID_EN,PID enable" "Disabled,Enabled"
bitfld.long 0x00 14.--18. "PID_VAL,PID value destination index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 13. "VID_EN,VID enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--12. 1. "VID_VAL,VID value"
line.long 0x04 "ANAEVENTS,Event Sticky Bits Register"
eventfld.long 0x04 30. "FLOOD_DISCARD,Flood frame discarded" "Not discarded,Discarded"
eventfld.long 0x04 26. "AUTOAGE,Auto age run perform" "Not performed,Performed"
eventfld.long 0x04 24. "STORM_DROP,Frame discard due to flooding storm limitations exceed" "Not discarded,Discarded"
newline
eventfld.long 0x04 23. "LEARN_DROP,Frame discard due to being a subject to learning while DropMode flag was set" "Not discarded,Discarded"
eventfld.long 0x04 22. "AGED_ENTRY,Entry removed at CPU learn/CPU requested aging process" "Not removed,Removed"
eventfld.long 0x04 21. "CPU_LEARN_FAILED,Learn operation failed due to hash table depletion" "Not failed,Failed"
newline
eventfld.long 0x04 20. "AUTO_LEARN_FAILED,Learn operation of incoming source MAC address failed due to hash table depletion" "Not failed,Failed"
eventfld.long 0x04 19. "LEARN_REMOVE,Entry removed when learning a new source MAC address" "Not removed,Removed"
eventfld.long 0x04 18. "AUTO_LEARNED,Entry learned from an incoming frame" "Not learned,Learned"
newline
eventfld.long 0x04 17. "AUTO_MOVED,Station was moved to another port" "Not moved,Moved"
eventfld.long 0x04 15. "CLASSIFIED_DROP,Frame was not forwarded due to classification" "Not forwarded,Forwarded"
eventfld.long 0x04 14. "CLASSIFIED_COPY,Frame was copied to the CPU due to classification" "Not copied,Copied"
newline
eventfld.long 0x04 13. "VLAN_DISCARD,Frame discard due to lack of VLAN membership on source port" "Not discarded,Discarded"
eventfld.long 0x04 12. "FWD_DISCARD,Frame discard due to missing forwarding state on source port" "Not discarded,Discarded"
eventfld.long 0x04 11. "MULTICAST_FLOOD,Frame flooded with multicast flooding mask" "Not flooded,Flooded"
newline
eventfld.long 0x04 10. "UNICAST_FLOOD,Frame flooded with unicast flooding mask" "Not flooded,Flooded"
eventfld.long 0x04 9. "DEST_KNOWN,Frame forwarded with known destination MAC address" "Not forwarded,Forwarded"
eventfld.long 0x04 8. "BUCKET3_MATCH,Destination found in hash table bucket 3" "Not found,Found"
newline
eventfld.long 0x04 7. "BUCKET2_MATCH,Destination found in hash table bucket 2" "Not found,Found"
eventfld.long 0x04 6. "BUCKET1_MATCH,Destination found in hash table bucket 1" "Not found,Found"
eventfld.long 0x04 5. "BUCKET0_MATCH,Destination found in hash table bucket 0" "Not found,Found"
newline
eventfld.long 0x04 4. "CPU_OPERATION,CPU-initiated operation on the MAC/VLAN table process" "Not processed,Processed"
eventfld.long 0x04 3. "DMAC_LOOKUP,Destination address looked up in the MAC table" "Not looked up,Looked up"
eventfld.long 0x04 2. "SMAC_LOOKUP,Destination address looked up in the MAC table" "Not looked up,Looked up"
newline
eventfld.long 0x04 1. "SEQ_GEN_ERR_0,Switch expected to sequence the stream" "No error,Error"
eventfld.long 0x04 0. "SEQ_GEN_ERR_1,Sequence generation not enabled in switch" "No error,Error"
line.long 0x08 "STORMLIMIT_BURST,Storm Policer Burst Register"
bitfld.long 0x08 0.--3. "STORM_BURST,Allowed number of frames" "1,2,4,8,16,32,64,128,256,512,1024,2048,4096,?..."
repeat 4. (increment 0x18 0x04)(increment 0 1)(strings "UC Storm" "BC Storm" "MC" "Learn")
group.long $1++0x03
line.long 0x00 "STORMLIMIT_CFG$2,$3 Policer Configuration Per Storm Policer Register $2"
bitfld.long 0x00 3.--6. "STORM_RATE,Allowed rate of storm policer" "1,2,4,8,16,32,64,128,256,512,1024,?..."
bitfld.long 0x00 2. "SOTRM_UNIT,Storm unit selection" "Kiloframe,Frame"
bitfld.long 0x00 0.--1. "STORM_MODE,Mode of operation for storm policed" "Disabled,CPU destination,Front port destination,Both"
repeat.end
group.long 0x28++0x1F
line.long 0x00 "ISOLATED_PORTS,Private VLAN Mask For Isolated Ports Register"
hexmask.long.byte 0x00 0.--6. 1. "ISOL_PORTS,Isolated ports mask"
line.long 0x04 "COMMUNITY_PORTS,Private VLAN Mask For Community Ports Register"
hexmask.long.byte 0x04 0.--6. 1. "COMM_PORTS,Community ports mask"
line.long 0x08 "AUTOAGE,Auto-Age Timer Register"
bitfld.long 0x08 21. "AGE_FAST,Age fast option enable" "Disabled,Enabled"
hexmask.long.tbyte 0x08 1.--20. 1. "AGE_PERDION,Time between automatic aging of a MAC table entry"
bitfld.long 0x08 0. "AUTOAGE_LOCKED,Setting of the AGED_FLAG for locked entries in MAC table enable" "Disabled,Enabled"
line.long 0x0C "MACTOPTIONS,MAC Table Options Register"
bitfld.long 0x0C 1. "REDUCED_TABLE,MAC table reduced" "Not reduced,Reduced"
bitfld.long 0x0C 0. "SHADOW,MAC table shadow registers enable" "Disabled,Enabled"
line.long 0x10 "LEARNDISC,Learn Discard Counter Register"
line.long 0x14 "AGENCTRL,Analyzer Configuration Register"
hexmask.long.word 0x14 12.--23. 1. "FID_MASK,Mask used to enable shared learning among multiple VLANs"
bitfld.long 0x14 11. "IGNORE_DMAC_FLAGS,DMAC flags ignored" "Not ignored,Ignored"
bitfld.long 0x14 10. "IGNORE_SMAC_FLAGS,SMAC flags ignored" "Not ignored,Ignored"
newline
bitfld.long 0x14 9. "FLOOD_SPECIAL,Flood frames using the lowest 7 bits of DMAC as destination port mask" "Not used,Used"
bitfld.long 0x14 8. "FLOOD_IGNORE_VLAN,Flood frames ignore VLAN" "Not ignored,Ignored"
bitfld.long 0x14 7. "MIRROR_CPU,Mirror CPU" "Low,High"
newline
bitfld.long 0x14 6. "LEARN_CPU_COPY,Auto-learned stations get the CPU_COPY flag set in the MAC table entry" "Disabled,Enabled"
bitfld.long 0x14 5. "LEARN_SRC_KILL,Auto-learned station get the SRC_KILL flag set in the MAC table entry" "Disabled,Enabled"
bitfld.long 0x14 4. "LEARN_IGNORE_VAN,Auto-learned stations get the IGNORE_VLAN flag set in the MAC table entry" "Disabled,Enabled"
newline
bitfld.long 0x14 3. "CPU_CPU_KILL_ENA,CPU injected frames never sent back to the CPU enable" "Disabled,Enabled"
bitfld.long 0x14 2. "GREEN_COUNT_MODE,Counter mode for the Rx priority counters for green frames" "Octets,Frames"
bitfld.long 0x14 1. "YELLOW_COUNT_MODE,Counter mode for the Rx priority counters for yellow frames" "Octets,Frames"
newline
bitfld.long 0x14 0. "RED_COUNT_MODE,Counter mode for the Rx priority counters for red frames" "Octets,Frames"
line.long 0x18 "MIRRORPORTS,Mirror Target Ports Register"
hexmask.long.byte 0x18 0.--6. 1. "MIRRORPORTS,Ports set in this mask receive a mirror copy"
line.long 0x1C "EMIRRORPORTS,Egress Mirror Mask Register"
hexmask.long.byte 0x1C 0.--6. 1. "EMIRRORPORTS,Frames forwarded to ports in this mask are mirrored to the port set configured in MIRRORPORTS"
repeat 8. (increment 0x48 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "FLOODING$2,Standard Flooding Configuration Register $2"
bitfld.long 0x00 12.--17. "FLD_UNICAST,Set the PGID mask to use when flooding unknown unicast frames" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--11. "FLD_BROADCAST,Set the PGID mask to use when flooding unknown broadcast frames" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--5. "FLD_MULTICAST,Set the PGID mask to use when flooding unknown multicast frames" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
repeat.end
group.long 0x68++0x03
line.long 0x00 "FLOODING_IPMC,Flooding Configuration For IP Multicasts Register"
bitfld.long 0x00 18.--23. "FLD_MC4_CTRL,Set the PGID mask to use when flooding unknown IPv4 multicast control frames" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 12.--17. "FLD_MC4_DATA,Set the PGID mask to use when flooding unknown IPv4 multicast data frames" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 6.--11. "FLD_MC6_CTRL,Set the PGID mask to use when flooding unknown IPv6 multicast control frames" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 0.--5. "FLD_MC6_DATA,Set the PGID mask to use when flooding unknown IPv6 multicast data frames" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
repeat 7. (increment 0x6C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SFLOW_CFG$2,SFLOW Sampling Configuration Per Switch Port $2"
hexmask.long.word 0x00 2.--13. 1. "SF_RATE,Probability of a frame being SFLOW sampled"
bitfld.long 0x00 1. "SF_SAMPLE_RX,Enable SFLOW sampling of frames received on this port" "Disabled,Enabled"
bitfld.long 0x00 0. "SF_SAMPLE_TX,Enable SFLOW sampling of frames transmitted on this port" "Disabled,Enabled"
repeat.end
repeat 8. (increment 0x88 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "PORT_MODE$2,Port Configuration Per Device Port Register $2"
bitfld.long 0x00 3. "REDTAG_PARSE_CFG,Configuration to enable parsing of redundancy tag" "Disabled,Enabled"
bitfld.long 0x00 0. "L3_PARSE_CFG,Enable frame analysis on Layer-3 and Layer-4 protocol information" "Disabled,Enabled"
repeat.end
repeat 7. (increment 0xA8 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "CUT_THRU_CFG$2,Specified Cut-Through Traffic Queues Register $2"
bitfld.long 0x00 7. "CUT_THRU_ENA[7],Queue 7 cut-through mode of operation" "Disabled,Enabled"
bitfld.long 0x00 6. "[6],Queue 6 cut-through mode of operation" "Disabled,Enabled"
bitfld.long 0x00 5. "[5],Queue 5 cut-through mode of operation" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "[4],Queue 4 cut-through mode of operation" "Disabled,Enabled"
bitfld.long 0x00 3. "[3],Queue 3 cut-through mode of operation" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],Queue 2 cut-through mode of operation" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "[1],Queue 1 cut-through mode of operation" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],Queue 0 cut-through mode of operation" "Disabled,Enabled"
repeat.end
tree.end
base ad:0x1FC000000+0x280000+0x8400
tree "ES_ANA_PGID Registers"
repeat 86. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "PGID$2,Port Group Identifiers Register $2"
bitfld.long 0x00 27.--29. "CPUQ_DST_PGID,CPU extraction queue used when CPU port is enable in PGID" "0,1,2,3,4,5,6,7"
hexmask.long.byte 0x00 0.--6. 1. "PGID,Port group ID"
repeat.end
tree.end
base ad:0x1FC000000+0x280000+0x7F00
tree "ES_ANA_ANA_TABLES Registers"
repeat 7. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "ENTRYLIM$2,MAC Table Entry Limits Per Switch Port $2"
bitfld.long 0x00 14.--17. "ENTRYLIM,Maximum number of unlocked in the MAC table learned on this port" "1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,8192,8192"
hexmask.long.word 0x00 0.--13. 1. "ENTRYSTAT,Current number of unlocked MAC table entries learned on this port"
repeat.end
group.long 0x1C++0x1F
line.long 0x00 "ANMOVED,Station Move Logger Register"
hexmask.long.byte 0x00 0.--6. 1. "ANMOVED,Port moves in the MAC table detection"
line.long 0x04 "MACHDATA,MAC Address High Register"
hexmask.long.word 0x04 16.--28. 1. "VID,VID used in MAC table operations through MACACCESS"
hexmask.long.word 0x04 0.--15. 0x01 "MACHDATA,Most significant 16 MAC address bits used in MAC table operations through MACACCESS"
line.long 0x08 "MACLDATA,MAC Address Low Register"
line.long 0x0C "STREAMDATA,Stream Information Register"
bitfld.long 0x0C 16. "SSID_VALID,Indicates whether SSID value is valid" "Invalid,Valid"
hexmask.long.byte 0x0C 9.--15. 1. "SSID,Indicates TSN seamless redundancy stream ID"
bitfld.long 0x0C 8. "SFID_VALID,SFID value valid" "Invalid,Valid"
newline
hexmask.long.byte 0x0C 0.--7. 1. "SFID,TSN stream filter ID"
line.long 0x10 "MACACCESS,MAC Table Command Register"
bitfld.long 0x10 15. "MAC_CPU_COPY,Frames matching this entry are copied to the CPU extraction queue" "Not copied,Copied"
bitfld.long 0x10 14. "SRC_KILL,Frames matching this entry are discarded" "Disabled,Enabled"
bitfld.long 0x10 13. "IGNORE_VLAN,VLAN mask ignore" "Not ignored,Ignored"
newline
bitfld.long 0x10 12. "AGED_FLAG,Aged flag" "Not set,Set"
bitfld.long 0x10 11. "VALID,Valid entry" "Invalid,Valid"
bitfld.long 0x10 9.--10. "ENTRY_TYPE,Type of entry" "Normal,Locked,IPv4,IPv6"
newline
bitfld.long 0x10 3.--8. "DEST_IDX,Destination index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x10 0.--2. "MAC_TABLE_CMD,MAC table command" "IDLE,LEARN,FORGET,AGE,GET_NEXT,INIT,READ,WRITE"
line.long 0x14 "MACTINDX,MAC Table Index Register"
bitfld.long 0x14 11.--12. "BUCKET,MAC table entries in a row select" "0,1,2,3"
hexmask.long.word 0x14 0.--10. 1. "M_INDEX,MAC table row select"
line.long 0x18 "VLANACCESS,VLAN Table Command Register"
hexmask.long.word 0x18 2.--8. 1. "VLAN_PORT_MASK,VLAN port mask"
bitfld.long 0x18 0.--1. "VLAN_TBL_CMD,VLAN table command" "IDLE,READ,WRITE,INIT"
line.long 0x1C "VLANTIDX,VLAN Table Index Register"
bitfld.long 0x1C 17. "VLAN_SEC_FWD_ENA,Enable secure forwarding on a per VLAN basis" "Disabled,Enabled"
bitfld.long 0x1C 16. "VLAN_FLOOD_DIS,Disable flooding of frames with unknown DMAC on a per VLAN basis" "No,Yes"
bitfld.long 0x1C 15. "VLAN_PRIV_VLAN,VLAN access type" "Public,Private"
newline
bitfld.long 0x1C 14. "VLAN_LEARN_DISABLED,Disable learning for this VLAN" "No,Yes"
bitfld.long 0x1C 13. "VLAN_MIRROR,All frames classified to this VLAN are mirrored to the port configures in MIRRORPORTS" "No,Yes"
bitfld.long 0x1C 12. "VLAN_SRC_CHK,VLAN ingress filtering enable for this VLAN" "Disabled,Enabled"
newline
hexmask.long.word 0x1C 0.--11. 1. "V_INDEX,Index used to select VLAN table entry for read/write operations"
group.long 0x44++0x23
line.long 0x00 "PTP_ID_HIGH,PTP Identifiers 63-32 Register"
bitfld.long 0x00 31. "PTP_ID_HIGH[63],Timestamp identifier 63" "Low,High"
bitfld.long 0x00 30. "[62],Timestamp identifier 62" "Low,High"
bitfld.long 0x00 29. "[61],Timestamp identifier 61" "Low,High"
newline
bitfld.long 0x00 28. "[60],Timestamp identifier 60" "Low,High"
bitfld.long 0x00 27. "[59],Timestamp identifier 59" "Low,High"
bitfld.long 0x00 26. "[58],Timestamp identifier 58" "Low,High"
newline
bitfld.long 0x00 25. "[57],Timestamp identifier 57" "Low,High"
bitfld.long 0x00 24. "[56],Timestamp identifier 56" "Low,High"
bitfld.long 0x00 23. "[55],Timestamp identifier 55" "Low,High"
newline
bitfld.long 0x00 22. "[54],Timestamp identifier 54" "Low,High"
bitfld.long 0x00 21. "[53],Timestamp identifier 53" "Low,High"
bitfld.long 0x00 20. "[52],Timestamp identifier 52" "Low,High"
newline
bitfld.long 0x00 19. "[51],Timestamp identifier 51" "Low,High"
bitfld.long 0x00 18. "[50],Timestamp identifier 50" "Low,High"
bitfld.long 0x00 17. "[49],Timestamp identifier 49" "Low,High"
newline
bitfld.long 0x00 16. "[48],Timestamp identifier 48" "Low,High"
bitfld.long 0x00 15. "[47],Timestamp identifier 47" "Low,High"
bitfld.long 0x00 14. "[46],Timestamp identifier 46" "Low,High"
newline
bitfld.long 0x00 13. "[45],Timestamp identifier 45" "Low,High"
bitfld.long 0x00 12. "[44],Timestamp identifier 44" "Low,High"
bitfld.long 0x00 11. "[43],Timestamp identifier 43" "Low,High"
newline
bitfld.long 0x00 10. "[42],Timestamp identifier 42" "Low,High"
bitfld.long 0x00 9. "[41],Timestamp identifier 41" "Low,High"
bitfld.long 0x00 8. "[40],Timestamp identifier 40" "Low,High"
newline
bitfld.long 0x00 7. "[39],Timestamp identifier 39" "Low,High"
bitfld.long 0x00 6. "[38],Timestamp identifier 38" "Low,High"
bitfld.long 0x00 5. "[37],Timestamp identifier 37" "Low,High"
newline
bitfld.long 0x00 4. "[36],Timestamp identifier 36" "Low,High"
bitfld.long 0x00 3. "[35],Timestamp identifier 35" "Low,High"
bitfld.long 0x00 2. "[34],Timestamp identifier 34" "Low,High"
newline
bitfld.long 0x00 1. "[33],Timestamp identifier 33" "Low,High"
bitfld.long 0x00 0. "[32],Timestamp identifier 32" "Low,High"
line.long 0x04 "PTP_ID_HIGH,PTP Identifiers 63-32 Register"
bitfld.long 0x04 31. "PTP_ID_HIGH[31],Timestamp identifier 31" "Low,High"
bitfld.long 0x04 30. "[30],Timestamp identifier 30" "Low,High"
bitfld.long 0x04 29. "[29],Timestamp identifier 29" "Low,High"
newline
bitfld.long 0x04 28. "[28],Timestamp identifier 28" "Low,High"
bitfld.long 0x04 27. "[27],Timestamp identifier 27" "Low,High"
bitfld.long 0x04 26. "[26],Timestamp identifier 26" "Low,High"
newline
bitfld.long 0x04 25. "[25],Timestamp identifier 25" "Low,High"
bitfld.long 0x04 24. "[24],Timestamp identifier 24" "Low,High"
bitfld.long 0x04 23. "[23],Timestamp identifier 23" "Low,High"
newline
bitfld.long 0x04 22. "[22],Timestamp identifier 22" "Low,High"
bitfld.long 0x04 21. "[21],Timestamp identifier 21" "Low,High"
bitfld.long 0x04 20. "[20],Timestamp identifier 20" "Low,High"
newline
bitfld.long 0x04 19. "[19],Timestamp identifier 19" "Low,High"
bitfld.long 0x04 18. "[18],Timestamp identifier 18" "Low,High"
bitfld.long 0x04 17. "[17],Timestamp identifier 17" "Low,High"
newline
bitfld.long 0x04 16. "[16],Timestamp identifier 16" "Low,High"
bitfld.long 0x04 15. "[15],Timestamp identifier 15" "Low,High"
bitfld.long 0x04 14. "[14],Timestamp identifier 14" "Low,High"
newline
bitfld.long 0x04 13. "[13],Timestamp identifier 13" "Low,High"
bitfld.long 0x04 12. "[12],Timestamp identifier 12" "Low,High"
bitfld.long 0x04 11. "[11],Timestamp identifier 11" "Low,High"
newline
bitfld.long 0x04 10. "[10],Timestamp identifier 10" "Low,High"
bitfld.long 0x04 9. "[9],Timestamp identifier 9" "Low,High"
bitfld.long 0x04 8. "[8],Timestamp identifier 8" "Low,High"
newline
bitfld.long 0x04 7. "[7],Timestamp identifier 7" "Low,High"
bitfld.long 0x04 6. "[6],Timestamp identifier 6" "Low,High"
bitfld.long 0x04 5. "[5],Timestamp identifier 5" "Low,High"
newline
bitfld.long 0x04 4. "[4],Timestamp identifier 4" "Low,High"
bitfld.long 0x04 3. "[3],Timestamp identifier 3" "Low,High"
bitfld.long 0x04 2. "[2],Timestamp identifier 2" "Low,High"
newline
bitfld.long 0x04 1. "[1],Timestamp identifier 1" "Low,High"
bitfld.long 0x04 0. "[0],Timestamp identifier 0" "Low,High"
line.long 0x08 "STREAMACCESS,Stream Table Command Register"
hexmask.long 0x08 4.--31. 1. "GEN_REC_SEQ_NUM,Generation/recovery sequence number"
bitfld.long 0x08 3. "SEQ_GEN_REC_ENA,Sequence generation/recovery enable" "Disabled,Enabled"
bitfld.long 0x08 2. "GEN_REC_TYPE,Type of stream sequence parameters" "Generation,Recovery"
newline
bitfld.long 0x08 0.--1. "STREAM_TBL_CMD,Stream table command" "IDLE,READ,WRITE,INIT"
line.long 0x0C "STREAMTIDX,Stream Table Index Register"
bitfld.long 0x0C 31. "SEQ_GEN_ERR_STATUS[1],Sequence generation error status bit 1" "No error,Error"
bitfld.long 0x0C 30. "[0],Sequence generation error status bit 0" "No error,Error"
hexmask.long.byte 0x0C 16.--22. 1. "S_INDEX,Index used to select STREAM table entry for read/write"
newline
bitfld.long 0x0C 14. "FORCE_SF_BEHAVIOUR,Force store-forward behavior" "Not forced,Forced"
bitfld.long 0x0C 8.--13. "SEQ_HISTORY_LEN,Sequence history length" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,?..."
bitfld.long 0x0C 7. "RESET_ON_ROGUE,Reset on rogue" "Disabled,Enabled"
newline
bitfld.long 0x0C 6. "REDTAG_POP,Enable removal of redundancy tag from the packet" "Disabled,Enabled"
bitfld.long 0x0C 5. "STREAM_SPLIT,Enable stream splitting function" "Disabled,Enabled"
bitfld.long 0x0C 0.--4. "SEQ_SPACE_LOG2,Number of bits to be used for sequence number" ",1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,?..."
line.long 0x10 "SEQ_HISTORY,Sequence History Register"
line.long 0x14 "SEQ_MASK,Masks Used By Sequence Generator Register"
hexmask.long.byte 0x14 16.--22. 1. "SPLIT_MASK,Port mask used to add redundant paths"
hexmask.long.byte 0x14 0.--6. 1. "INPUT_PORT_MASK,Input port mask"
line.long 0x18 "SFID_MASK,IGR Port Mask And Enable Of IGR Port Mask Register"
hexmask.long.byte 0x18 1.--7. 1. "IGR_PORT_MASK,IGR port mask"
bitfld.long 0x18 0. "IGR_SRCPORT_MATCH_ENA,IGR source port match enable" "Disabled,Enabled"
line.long 0x1C "SFIDACCESS,Stream Filter Table Command Register"
bitfld.long 0x1C 24. "BLOCK_OVERSIZE_FRM,Block oversize frame" "Not dropped,Dropped"
bitfld.long 0x1C 23. "BLOCK_OVERSIZE_FRM_ENA,Block oversize frame enable" "Disabled,Enabled"
bitfld.long 0x1C 22. "IGR_PRIO_MATCH_ENA,IGR priority match enable" "Disabled,Enabled"
newline
bitfld.long 0x1C 19.--21. "IGR_PRIO,IGR priority" "0,1,2,3,4,5,6,7"
bitfld.long 0x1C 18. "FORCE_BLOCK,Force block mode enable" "Disabled,Enabled"
hexmask.long.tbyte 0x1C 2.--17. 1. "MAX_SDU_LEN,Maximum allowed frame size for the selected stream"
newline
bitfld.long 0x1C 0.--1. "SFID_TBL_CMD,Stream filter table command" "IDLE,READ,WRITE,INIT"
line.long 0x20 "SFIDTIDX,Stream Filter Table Index Register"
bitfld.long 0x20 26. "SGID_VALID,SGID valid value" "Invalid,Valid"
hexmask.long.word 0x20 18.--25. 0x04 "SGID,Stream gate ID pointer"
bitfld.long 0x20 17. "POL_ENA,Policer enable" "Disabled,Enabled"
newline
hexmask.long.byte 0x20 0.--7. 1. "SFID_INDEX,Stream filter ID index"
tree.end
base ad:0x1FC000000+0x280000+0x8A64
tree "ES_ANA_SG_ACCESS Register"
group.long 0x00++0x03
line.long 0x00 "CTRL,Stream Gate Access Controller"
bitfld.long 0x00 28. "CONFIG_CHANGE,Indicates that admin parameters are ready to be copied" "Not ready,Ready"
hexmask.long.byte 0x00 0.--7. 1. "SGID,Stream gate identifier value"
tree.end
base ad:0x1FC000000+0x280000+0x7F80
tree "ES_ANA_SG_CONFIG Registers"
repeat 4. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x0B
line.long 0x00 "SG_GCL_GS_CONFIG$2,SG - Admin Gate Control List (GCL) Gate State Configuration $2 Register"
bitfld.long 0x00 4. "GATE_STATE,Gates state of the stream for time interval specified through TIME_INTERVAL" "0,1"
bitfld.long 0x00 3. "IPS[3],IPS [0:2] valid" "Not valid,Valid"
bitfld.long 0x00 0.--2. "[0:2],Internal priority value" "0,1,2,3,4,5,6,7"
line.long 0x04 "SG_GCL_TI_CONFIG$2,SG - Admin Gate Control List (GCL) Time Interval Configuration $2 Register"
line.long 0x08 "SG_GCL_OCT_CONFIG$2,SG - Admin Gate Control List (GCL) Interval Octet Max Configuration $2 Register"
repeat.end
group.long 0x30++0x03
line.long 0x00 "SG_CONFIG_REG_1,SG Admin Parameter Configuration Register 1"
group.long 0x34++0x03
line.long 0x00 "SG_CONFIG_REG_2,SG Admin Parameter Configuration Register 2"
group.long 0x38++0x03
line.long 0x00 "SG_CONFIG_REG_3,SG Admin Parameter Configuration Register 3"
bitfld.long 0x00 29. "OCTETS_EXCEEDED,Octets exceed" "Not exceeded,Exceeded"
bitfld.long 0x00 28. "OCTETS_EXCEEDED_ENA,Octets exceed function enable" "Disabled,Enabled"
bitfld.long 0x00 27. "INVALID_RX,Invalid Rx" "Valid,Invalid"
newline
bitfld.long 0x00 26. "INVALID_RX_ENA,Invalid Rx function enable" "Disabled,Enabled"
bitfld.long 0x00 25. "INIT_GATE_STATE,Initial state of stream gate" "Closed,Opened"
bitfld.long 0x00 24. "INIT_IPS[3],Initial OperIPS value valid" "Not valid,Valid"
newline
bitfld.long 0x00 21.--23. "[0:2],Initial OperIPS value" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20. "GATE_ENABLE,Stream gate FSMs for the stream enable" "Disabled,Enabled"
bitfld.long 0x00 16.--18. "LIST_LENGTH,Length of the control list" "0,1,2,3,4,5,6,7"
newline
hexmask.long.word 0x00 0.--15. 1. "BASE_TIME_SEC_MSB,Most significant 16 bits of second part of PSFPAdminBaseTime"
group.long 0x3C++0x03
line.long 0x00 "SG_CONFIG_REG_4,SG Admin Parameter Configuration Register 4"
group.long 0x40++0x03
line.long 0x00 "SG_CONFIG_REG_5,SG Admin Parameter Configuration Register 5"
tree.end
base ad:0x1FC000000+0x280000+0x8980
tree "ES_ANA_SG_STATUS Registers"
rgroup.long 0x0++0x03
line.long 0x00 "SG_STATUS_REG_1,SG Oper Status Register 1"
rgroup.long 0x4++0x03
line.long 0x00 "SG_STATUS_REG_2,SG Oper Status Register 2"
rgroup.long 0x8++0x03
line.long 0x00 "SG_STATUS_REG_3,SG Oper Status Register 3"
bitfld.long 0x00 24. "CONFIG_PENDING,Current PSFPConfigPending status" "0,1"
bitfld.long 0x00 23. "IPS[3],IPS [0:2] valid" "Not valid,Valid"
bitfld.long 0x00 20.--22. "[0:2],Internal priority value" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16. "GATE_STATE,Current gate state of stream" "0,1"
hexmask.long.word 0x00 0.--15. 1. "CFG_CHG_TIME_SEC_MSB,Most significant 16 bits of seconds part of PSFPConfigChangeTime"
tree.end
base ad:0x1FC000000+0x280000+0x7800
repeat 7. (increment 0x00 0x100)(increment 0 1)
tree "ES_ANA_PORT $2 Registers"
group.long $1++0xA3
line.long 0x00 "VLAN_CFG,Port VLAN Configuration Register"
bitfld.long 0x00 20. "VLAN_AWARE_ENA,Enable VLAN awareness" "Disabled,Enabled"
bitfld.long 0x00 18.--19. "VLAN_POP_CNT,Number of tag headers to remove from ingress frame" "Keep all tags,Pop up to 1 tag,Pop up to 2 tags,Rewriting disabled"
bitfld.long 0x00 17. "VLAN_INNER_TAG_ENA,VLAN inner tag enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "VLAN_TAG_TYPE,Tag protocol identifier type for port-based VLAN" "C-tag,S-tag"
bitfld.long 0x00 15. "VLAN_DEI,DEI value for port-based VLAN" "0,1"
bitfld.long 0x00 12.--14. "VLAN_PCP,PCP value for port-based VLAN" "0,1,2,3,4,5,6,7"
newline
hexmask.long.word 0x00 0.--11. 1. "VLAN_VID,VID value for port-based VLAN"
line.long 0x04 "DROP_CFG,VLAN Acceptance Filtering Register"
bitfld.long 0x04 6. "DROP_UNTAGGED_ENA,Drop untagged frames enable" "Disabled,Enabled"
bitfld.long 0x04 5. "DOP_S_TAGGED_ENA,Drop S-tagged frames enable" "Disabled,Enabled"
bitfld.long 0x04 4. "DROP_C_TAGGED_ENA,Drop C-tagged frames enable" "Disabled,Enabled"
newline
bitfld.long 0x04 3. "DROP_PRIO_S_TAGGED_ENA,Drop S-tagged frames enable" "Disabled,Enabled"
bitfld.long 0x04 2. "DROP_PRIO_C_TAGGED_ENA,Drop priority C-tagged frames enable" "Disabled,Enabled"
bitfld.long 0x04 1. "DROP_NULL_MAC_ENA,Drop frames with source or destination MAC address equal to 0x00 enable" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "DROP_MC_SMAC_ENA,Drop frames with multicast source MAC address enable" "Disabled,Enabled"
line.long 0x08 "QOS_CFG,QoS And DSCP Configuration Register"
bitfld.long 0x08 8. "DP_DEFAULT_VAL,Default drop precedence level" "0,1"
bitfld.long 0x08 5.--7. "QOS_DEFAULT_VAL,Default QoS class" "0,1,2,3,4,5,6,7"
bitfld.long 0x08 4. "QOS_DSCP_ENA,DP level and QoS class can be based on DSCP values enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "QOS_PCP_ENA,DP level and QoS class can be based on the PCP and DEI bits for tagged frames enable" "Disabled,Enabled"
bitfld.long 0x08 2. "DSCP_TRANSLATE_ENA,DSCP translate enable" "Disabled,Enabled"
bitfld.long 0x08 0.--1. "DSCP_REWR_CFG,Configure which DSCP values to rewrite based on DP level and QoS class" "None,If DSCP=0,For selected values,All"
line.long 0x0C "VCAP_CFG,VCAP Configuration Register"
bitfld.long 0x0C 14. "S1_ENA,S1 enable" "Disabled,Enabled"
bitfld.long 0x0C 13. "S1_DMAC_DIP_ENA[2],S1 DMAC destination IP address for lookup[2] enable" "Disabled,Enabled"
bitfld.long 0x0C 12. "[1],S1 DMAC destination IP address for lookup[1] enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 11. "[0],S1 DMAC destination IP address for lookup[0] enable" "Disabled,Enabled"
bitfld.long 0x0C 10. "S1_VLAN_INNER_TAG_ENA[2],S1 VLAN inner tag for lookup[2] enable" "Disabled,Enabled"
bitfld.long 0x0C 9. "[1],S1 VLAN inner tag for lookup[1] enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 8. "[0],S1 VLAN inner tag for lookup[0] enable" "Disabled,Enabled"
hexmask.long.byte 0x0C 0.--7. 1. "PAG_VAL,Default PAG value used as input to S2"
line.long 0x10 "VCAP_S1_KEY_CFG0,VCAP S1 Key Configuration Per S1 Lookup 0 Register"
bitfld.long 0x10 4.--6. "S1_KEY_IP6_CFG,Key per lookup in S1 for IPv6 frames select" "Normal,7TUPLE,5TUPLE_IP4,Normal IP6,5TUPLE_IP6,DBL_VID,?..."
bitfld.long 0x10 2.--3. "S1_KEY_IP4_CFG,Key per lookup in S1 for IPv4 frames select" "Normal,7TUPLE,5TUPLE_IP4,DBL_VID"
bitfld.long 0x10 0.--1. "S1_KEY_OTHER_CFG,Key per lookup in S1 for non-IP frames select" "Normal,7TUPLE,DBL_VID,?..."
line.long 0x14 "VCAP_S1_KEY_CFG1,VCAP S1 Key Configuration Per S1 Lookup 1 Register"
bitfld.long 0x14 4.--6. "S1_KEY_IP6_CFG,Key per lookup in S1 for IPv6 frames select" "Normal,7TUPLE,5TUPLE_IP4,Normal IP6,5TUPLE_IP6,DBL_VID,?..."
bitfld.long 0x14 2.--3. "S1_KEY_IP4_CFG,Key per lookup in S1 for IPv4 frames select" "Normal,7TUPLE,5TUPLE_IP4,DBL_VID"
bitfld.long 0x14 0.--1. "S1_KEY_OTHER_CFG,Key per lookup in S1 for non-IP frames select" "Normal,7TUPLE,DBL_VID,?..."
line.long 0x18 "VCAP_S1_KEY_CFG2,VCAP S1 Key Configuration Per S1 Lookup 2 Register"
bitfld.long 0x18 4.--6. "S1_KEY_IP6_CFG,Key per lookup in S1 for IPv6 frames select" "Normal,7TUPLE,5TUPLE_IP4,Normal IP6,5TUPLE_IP6,DBL_VID,?..."
bitfld.long 0x18 2.--3. "S1_KEY_IP4_CFG,Key per lookup in S1 for IPv4 frames select" "Normal,7TUPLE,5TUPLE_IP4,DBL_VID"
bitfld.long 0x18 0.--1. "S1_KEY_OTHER_CFG,Key per lookup in S1 for non-IP frames select" "Normal,7TUPLE,DBL_VID,?..."
line.long 0x1C "VCAP_S2_CFG,VCAP S2 Configuration Register"
bitfld.long 0x1C 14. "S2_ENA,S2 enable" "Disabled,Enabled"
bitfld.long 0x1C 13. "S2_SNAP_DIS[1],MAC_SNAP frames receive for second lookup disable" "No,Yes"
bitfld.long 0x1C 12. "[0],MAC_SNAP frames receive for first lookup disable" "No,Yes"
newline
bitfld.long 0x1C 11. "S2_ARP_DIS,MAC_ARP frames receive for second lookup disable" "No,Yes"
bitfld.long 0x1C 10. "[0],MAC_ARP frames receive for first lookup disable" "No,Yes"
bitfld.long 0x1C 9. "S2_IP_TCPUDP_DIS[1],IP_TCPUDP frames receive for second lookup disable" "No,Yes"
newline
bitfld.long 0x1C 8. "[0],IP_TCPUDP frames receive for first lookup disable" "No,Yes"
bitfld.long 0x1C 7. "S2_IP_OTHER_DIS[1],IP_OTHER frames receive for second lookup disable" "No,Yes"
bitfld.long 0x1C 6. "[0],IP_OTHER frames receive for first lookup disable" "No,Yes"
newline
bitfld.long 0x1C 4.--5. "S2_IP6_CFG[2:3],The key generation for IPv6 frames control for second lookup" "IP6_[TCPUDP/OTHER],IP6_STD,IP4_[TCPUDP/OTHER],MAC_ETYPE"
bitfld.long 0x1C 2.--3. "[0:1],The key generation for IPv6 frames control for first lookup" "IP6_[TCPUDP/OTHER],IP6_STD,IP4_[TCPUDP/OTHER],MAC_ETYPE"
line.long 0x20 "QOS_PCP_DEI_MAP_CFG0,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 0 Register"
bitfld.long 0x20 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x20 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x24 "QOS_PCP_DEI_MAP_CFG1,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 1 Register"
bitfld.long 0x24 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x24 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x28 "QOS_PCP_DEI_MAP_CFG2,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 2 Register"
bitfld.long 0x28 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x28 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x2C "QOS_PCP_DEI_MAP_CFG3,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 3 Register"
bitfld.long 0x2C 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x2C 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x30 "QOS_PCP_DEI_MAP_CFG4,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 4 Register"
bitfld.long 0x30 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x30 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x34 "QOS_PCP_DEI_MAP_CFG5,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 5 Register"
bitfld.long 0x34 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x34 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x38 "QOS_PCP_DEI_MAP_CFG6,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 6 Register"
bitfld.long 0x38 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x38 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x3C "QOS_PCP_DEI_MAP_CFG7,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 7 Register"
bitfld.long 0x3C 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x3C 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x40 "QOS_PCP_DEI_MAP_CFG8,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 8 Register"
bitfld.long 0x40 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x40 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x44 "QOS_PCP_DEI_MAP_CFG9,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 9 Register"
bitfld.long 0x44 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x44 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x48 "QOS_PCP_DEI_MAP_CFG10,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 10 Register"
bitfld.long 0x48 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x48 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x4C "QOS_PCP_DEI_MAP_CFG11,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 11 Register"
bitfld.long 0x4C 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x4C 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x50 "QOS_PCP_DEI_MAP_CFG12,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 12 Register"
bitfld.long 0x50 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x50 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x54 "QOS_PCP_DEI_MAP_CFG13,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 13 Register"
bitfld.long 0x54 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x54 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x58 "QOS_PCP_DEI_MAP_CFG14,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 14 Register"
bitfld.long 0x58 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x58 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x5C "QOS_PCP_DEI_MAP_CFG15,Mapping of DEI And PCP To QoS Class And Drop Precedence Level 15 Register"
bitfld.long 0x5C 3. "DP_PCP_DEI_VAL,Frame's PCP and DEI values to a drop precedence level" "0,1"
bitfld.long 0x5C 0.--2. "QOS_PCP_DEI_VAL,Frame's PCP and DEI values to a QoS class" "0,1,2,3,4,5,6,7"
line.long 0x60 "CPU_FWD_CFG,CPU Forwarding Of Special Protocols Register"
bitfld.long 0x60 6. "CPU_MLD_REDIR_ENA,MLD frames to CPU redirection enable" "Disabled,Enabled"
bitfld.long 0x60 5. "CPU_IGMP_REDIR_ENA,IGMP frames to CPU redirection enable" "Disabled,Enabled"
bitfld.long 0x60 4. "CPU_IPMC_CTRL_COPY_ENA,IPv4 multicast frames control enable" "Disabled,Enabled"
newline
bitfld.long 0x60 3. "CPU_SRC_COPY_ENA,All frames copy to the CPU copy enable" "Disabled,Enabled"
bitfld.long 0x60 2. "CPU_ALLBRIDGE_DROP_ENA,All LANs bridge management group access frames drop enable" "Disabled,Enabled"
bitfld.long 0x60 1. "CPU_ALLBRIDGE_REDIR_ENA,All LANs bridge management group access frames redirect enable" "Disabled,Enabled"
line.long 0x64 "CPU_FWD_BPDU_CFG,CPU Forwarding Of BPDU Frames Register"
bitfld.long 0x64 15. 31. "BPDU_FWD[15],BPDU frames forwarding control [15]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 14. 30. "[14],BPDU frames forwarding control [14]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 13. 29. "[13],BPDU frames forwarding control [13]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x64 12. 28. "[12],BPDU frames forwarding control [12]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 11. 27. "[11],BPDU frames forwarding control [11]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 10. 26. "[10],BPDU frames forwarding control [10]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x64 9. 25. "[9],BPDU frames forwarding control [9]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 8. 24. "[8],BPDU frames forwarding control [8]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 7. 23. "[7],BPDU frames forwarding control [7]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x64 6. 22. "[6],BPDU frames forwarding control [6]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 5. 21. "[5],BPDU frames forwarding control [5]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 4. 20. "[4],BPDU frames forwarding control [4]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x64 3. 19. "[3],BPDU frames forwarding control [3]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 2. 18. "[2],BPDU frames forwarding control [2]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x64 1. 17. "[1],BPDU frames forwarding control [1]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x64 0. 16. "[0],BPDU frames forwarding control [0]" "No action,Redirected to CPU,Discarded,Copied to CPU"
line.long 0x68 "CPU_FWD_GARP_CFG,CPU Forwarding Of GARP Frames Register"
bitfld.long 0x68 15. 31. "GARP_FWD[15],GARP frames forwarding control [15]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 14. 30. "[14],GARP frames forwarding control [14]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 13. 29. "[13],GARP frames forwarding control [13]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x68 12. 28. "[12],GARP frames forwarding control [12]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 11. 27. "[11],GARP frames forwarding control [11]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 10. 26. "[10],GARP frames forwarding control [10]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x68 9. 25. "[9],GARP frames forwarding control [9]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 8. 24. "[8],GARP frames forwarding control [8]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 7. 23. "[7],GARP frames forwarding control [7]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x68 6. 22. "[6],GARP frames forwarding control [6]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 5. 21. "[5],GARP frames forwarding control [5]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 4. 20. "[4],GARP frames forwarding control [4]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x68 3. 19. "[3],GARP frames forwarding control [3]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 2. 18. "[2],GARP frames forwarding control [2]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x68 1. 17. "[1],GARP frames forwarding control [1]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x68 0. 16. "[0],GARP frames forwarding control [0]" "No action,Redirected to CPU,Discarded,Copied to CPU"
line.long 0x6C "CPU_FWD_CCM_CFG,CPU Forwarding Of CCM/Link trace Frames Register"
bitfld.long 0x6C 15. 31. "CCM_FWD[15],CCM/Link trace frames forwarding control [15]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 14. 30. "[14],CCM/Link trace frames forwarding control [14]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 13. 29. "[13],CCM/Link trace frames forwarding control [13]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x6C 12. 28. "[12],CCM/Link trace frames forwarding control [12]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 11. 27. "[11],CCM/Link trace frames forwarding control [11]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 10. 26. "[10],CCM/Link trace frames forwarding control [10]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x6C 9. 25. "[9],CCM/Link trace frames forwarding control [9]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 8. 24. "[8],CCM/Link trace frames forwarding control [8]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 7. 23. "[7],CCM/Link trace frames forwarding control [7]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x6C 6. 22. "[6],CCM/Link trace frames forwarding control [6]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 5. 21. "[5],CCM/Link trace frames forwarding control [5]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 4. 20. "[4],CCM/Link trace frames forwarding control [4]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x6C 3. 19. "[3],CCM/Link trace frames forwarding control [3]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 2. 18. "[2],CCM/Link trace frames forwarding control [2]" "No action,Redirected to CPU,Discarded,Copied to CPU"
bitfld.long 0x6C 1. 17. "[1],CCM/Link trace frames forwarding control [1]" "No action,Redirected to CPU,Discarded,Copied to CPU"
newline
bitfld.long 0x6C 0. 16. "[0],CCM/Link trace frames forwarding control [0]" "No action,Redirected to CPU,Discarded,Copied to CPU"
line.long 0x70 "PORT_CFG,Special Port Configuration Register"
bitfld.long 0x70 15. "SCR_MIRROR_ENA,Mirror error enable" "Disabled,Enabled"
bitfld.long 0x70 14. "LIMIT_DROP,Learn frame on an ingress port drop" "Not dropped,Dropped"
bitfld.long 0x70 13. "LIMIT_CPU,Learn frames on ingress port to CPU copy" "Not copied,Copied"
newline
bitfld.long 0x70 12. "LOCKED_PORTMOVE_DROP,Incoming frames triggering a port move drop" "Not dropped,Dropped"
bitfld.long 0x70 11. "LOCKED_PORTMOVE_CPU,Incoming frames triggering a port move to CPU copy" "Not copied,Copied"
bitfld.long 0x70 10. "LEARNDROP,Incoming frames received on this port drop" "Not dropped,Dropped"
newline
bitfld.long 0x70 9. "LEARNCPU,Incoming frames received on this port to the CPU copy" "Not copied,Copied"
bitfld.long 0x70 8. "LEARNAUTO,Incoming frames received on this port auto learn enable" "Disabled,Enabled"
bitfld.long 0x70 7. "LEARN_ENA,Learning for frames received on this port enable" "Disabled,Enabled"
newline
bitfld.long 0x70 6. "RECV_ENA,Enable forwarding from this port based on VLAN and destination MAC address" "Disabled,Enabled"
bitfld.long 0x70 2.--5. "PORTID_VAL,Logical port number for front port" "0,1,2,3,4,5,6,7,8,?..."
line.long 0x74 "POL_CFG,Policer Selection Register"
bitfld.long 0x74 19. "POL_CPU_REDIR_8021,Frames with DMAC = IEEE reserved address copied to the CPU not policed" "No,Yes"
bitfld.long 0x74 18. "POL_CPU_REDIR_IP,IGMP and MLD frames redirected to the CPU not policed" "No,Yes"
bitfld.long 0x74 17. "PORT_POL_ENA,Enable port policing for frames received on this port" "Disabled,Enabled"
newline
bitfld.long 0x74 16. "QUEUE_POL_ENA[7],Enable policing of frames classified to QoS class 7 on this port" "Disabled,Enabled"
bitfld.long 0x74 15. "[6],Enable policing of frames classified to QoS class 6 on this port" "Disabled,Enabled"
bitfld.long 0x74 14. "[5],Enable policing of frames classified to QoS class 5 on this port" "Disabled,Enabled"
newline
bitfld.long 0x74 13. "[4],Enable policing of frames classified to QoS class 4 on this port" "Disabled,Enabled"
bitfld.long 0x74 12. "[3],Enable policing of frames classified to QoS class 3 on this port" "Disabled,Enabled"
bitfld.long 0x74 11. "[2],Enable policing of frames classified to QoS class 2 on this port" "Disabled,Enabled"
newline
bitfld.long 0x74 10. "[1],Enable policing of frames classified to QoS class 1 on this port" "Disabled,Enabled"
bitfld.long 0x74 9. "[0],Enable policing of frames classified to QoS class 0 on this port" "Disabled,Enabled"
bitfld.long 0x74 8. "POL_ORDER[8],VCAP policers must be open in orded to update VCAP policer with frame" "No,Yes"
newline
bitfld.long 0x74 7. "[7],QoS policer must be open in order to update VCAP policer with frame" "No,Yes"
bitfld.long 0x74 6. "[6],Port policer must be open in order to update VCAP policer with frame" "No,Yes"
bitfld.long 0x74 5. "[5],VCAP policer must be open in order to update QoS policer with frame" "No,Yes"
newline
bitfld.long 0x74 4. "[4],QoS policer must be open in order to update QoS policer with frame" "No,Yes"
bitfld.long 0x74 3. "[3],Port policer must be open in order to update QoS policer with frame" "No,Yes"
bitfld.long 0x74 2. "[2],VCAP policer must be open in order to update port policer with frame" "No,Yes"
newline
bitfld.long 0x74 1. "[1],QoS policer must be open in order to update port policer with frame" "No,Yes"
bitfld.long 0x74 0. "[0],Port policer must be open in order to update port policer with frame" "No,Yes"
line.long 0x78 "PTP_CFG,Timing Protocol Configuration Register"
bitfld.long 0x78 0. "PTP_BACKPLANE_MODE,Backplane mode for PTP" "0,1"
line.long 0x7C "PTP_DLY1_CFG,PTP Ingress Delay 1 Configuration Register"
line.long 0x80 "PTP_DLY2_CFG,PTP Ingress Delay 2 Configuration Register"
line.long 0x84 "SFID_CFG0,Stream Filter ID(SFID) Configuration Per Port Per CoS Register 0"
bitfld.long 0x84 8. "SFID_VALID,Stream filter ID value for corresponding CoS valid" "Not valid,Valid"
hexmask.long.byte 0x84 0.--7. 1. "SFID,Stream filter ID value"
line.long 0x88 "SFID_CFG1,Stream Filter ID(SFID) Configuration Per Port Per CoS Register 1"
bitfld.long 0x88 8. "SFID_VALID,Stream filter ID value for corresponding CoS valid" "Not valid,Valid"
hexmask.long.byte 0x88 0.--7. 1. "SFID,Stream filter ID value"
line.long 0x8C "SFID_CFG2,Stream Filter ID(SFID) Configuration Per Port Per CoS Register 2"
bitfld.long 0x8C 8. "SFID_VALID,Stream filter ID value for corresponding CoS valid" "Not valid,Valid"
hexmask.long.byte 0x8C 0.--7. 1. "SFID,Stream filter ID value"
line.long 0x90 "SFID_CFG3,Stream Filter ID(SFID) Configuration Per Port Per CoS Register 3"
bitfld.long 0x90 8. "SFID_VALID,Stream filter ID value for corresponding CoS valid" "Not valid,Valid"
hexmask.long.byte 0x90 0.--7. 1. "SFID,Stream filter ID value"
line.long 0x94 "SFID_CFG4,Stream Filter ID(SFID) Configuration Per Port Per CoS Register 4"
bitfld.long 0x94 8. "SFID_VALID,Stream filter ID value for corresponding CoS valid" "Not valid,Valid"
hexmask.long.byte 0x94 0.--7. 1. "SFID,Stream filter ID value"
line.long 0x98 "SFID_CFG5,Stream Filter ID(SFID) Configuration Per Port Per CoS Register 5"
bitfld.long 0x98 8. "SFID_VALID,Stream filter ID value for corresponding CoS valid" "Not valid,Valid"
hexmask.long.byte 0x98 0.--7. 1. "SFID,Stream filter ID value"
line.long 0x9C "SFID_CFG6,Stream Filter ID(SFID) Configuration Per Port Per CoS Register 6"
bitfld.long 0x9C 8. "SFID_VALID,Stream filter ID value for corresponding CoS valid" "Not valid,Valid"
hexmask.long.byte 0x9C 0.--7. 1. "SFID,Stream filter ID value"
line.long 0xA0 "SFID_CFG7,Stream Filter ID(SFID) Configuration Per Port Per CoS Register 7"
bitfld.long 0xA0 8. "SFID_VALID,Stream filter ID value for corresponding CoS valid" "Not valid,Valid"
hexmask.long.byte 0xA0 0.--7. 1. "SFID,Stream filter ID value"
tree.end
repeat.end
base ad:0x1FC000000+0x280000+0x8800
tree "ES_ANA_PFC Registers"
repeat 6. (increment 0x00 0x40)(increment 0 1)
group.long $1++0x03
line.long 0x00 "PFC_CFG,Priority-Based Flow Control Configuration Register $2"
bitfld.long 0x00 9. "RX_PFC_ENA[7],Enable PFC per priority 7" "Disabled,Enabled"
bitfld.long 0x00 8. "[6],Enable PFC per priority 6" "Disabled,Enabled"
bitfld.long 0x00 7. "[5],Enable PFC per priority 5" "Disabled,Enabled"
bitfld.long 0x00 6. "[4],Enable PFC per priority 4" "Disabled,Enabled"
bitfld.long 0x00 5. "[3],Enable PFC per priority 3" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "[2],Enable PFC per priority 2" "Disabled,Enabled"
bitfld.long 0x00 3. "[1],Enable PFC per priority 1" "Disabled,Enabled"
bitfld.long 0x00 2. "[0],Enable PFC per priority 0" "Disabled,Enabled"
bitfld.long 0x00 0.--1. "FC_LINK_SPEED,Configures the link speed" "2500 Mbps,1000 Mbps,100 Mbps,10 Mbps"
repeat.end
tree.end
base ad:0x1FC000000+0x280000+0x8A68
tree "ES_ANA_COMMON Registers"
group.long 0x00++0x07
line.long 0x00 "AGGR_CFG,Aggregation Code Generation Register"
bitfld.long 0x00 7. "AC_RND_ENA,Pseudo random number for aggregation code enable" "Disabled,Enabled"
bitfld.long 0x00 6. "AC_DMAC_ENA,Use the lower 12 bits of the destination MAC address for aggregation code" "Disabled,Enabled"
bitfld.long 0x00 5. "AC_SMAC_ENA,Use the lower 12 bits of the source MAC address for aggregation code" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "AC_IP6_FLOW_LBL_ENA,Use the 20-bit IPv6 flow label for aggregation code" "Disabled,Enabled"
bitfld.long 0x00 3. "AC_IP6_TCPUDP_ENA,Use least significant 8 bits of both source port and destination port of IPv6 frames for aggregation code" "Disabled,Enabled"
bitfld.long 0x00 2. "AC_IP4_SIPDIP_ENA,Use least significant 8 bits of both source IP address and destination IP address of IPv4 frames for aggregation code" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "AC_IP4_TCPUDP_ENA,Use least significant 8 bits of both source port and destination port of IPv4 frames for aggregation code" "Disabled,Enabled"
line.long 0x04 "CPUQ_CFG,CPU Extraction Queue Configuration Register"
bitfld.long 0x04 27.--29. "CPUQ_MLD,CPU extraction queue used for MLD frames" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "CPUQ_IGMP,CPU extraction queue used for IGMP frames" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 21.--23. "CPUQ_IPMC_CTRL,CPU extraction queue used for IPv4 multicast control frame" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 18.--20. "CPUQ_ALLBRIDGE,CPU extraction queue used for all LANs bridge management group address frames" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 15.--17. "CPUQ_LOCKED_PORTMOVE,CPU extraction queue for frames triggering a port move for a locked MAC table entry" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 12.--14. "CPUQ_SRC_COPY,CPU extraction queue for frames copied due to CPU_SRC_COPY_ENA" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 9.--11. "CPUQ_MAC_COPY,CPU extraction queue for frames copied due to CPU_COPY return by MAC table lookup" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 6.--8. "CPUQ_LRN,CPU extraction queue for frames copied due to learned or moved stations" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 3.--5. "CPUQ_MIRROR,CPU extraction queue for frames copied due to mirroring to the CPU" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 0.--2. "CPUQ_SFLOW,CPU extraction queue for frames copied due to SFLOW sampling" "0,1,2,3,4,5,6,7"
repeat 16. (increment 0x0C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "CPUQ_8021_CFG$2,CPU Extraction Queue Per Address Of BPDU Register $2"
bitfld.long 0x00 6.--8. "CPUQ_BPDU_VAL,CPU extraction queue used for BPDU frames" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 3.--5. "CPUQ_GARP_VAL,CPU extraction queue used for GARP frames" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "CPUQ_CCM_VAL,CPU extraction queue used for CCM/Link trace frames" "0,1,2,3,4,5,6,7"
repeat.end
repeat 64. (increment 0x4C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "DSCP_CFG$2,DSCP Configuration Per DSCP Value Register $2"
bitfld.long 0x00 11. "DP_DSCP_VAL,DSCP frame value to a drop precedence level" "0,1"
bitfld.long 0x00 8.--10. "QOS_DSCP_VAL,DSCP frame value to a QoS class" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 2.--7. "DSCP_TRANSLATE_VAL,Translated DSCP value triggered if DSCP translation is set for port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 1. "DSCP_TRUST_ENA,DSCP trust enable" "Disabled,Enabled"
bitfld.long 0x00 0. "DSCP_REWR_ENA,DSCP value is selected to be rewritten" "Not selected,Selected"
repeat.end
repeat 16. (increment 0x14C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "DSCP_REWR_CFG$2,DSCP Rewrite Values Per DP Level And QoS Class Register $2"
bitfld.long 0x00 0.--5. "DSCP_QOS_REWR_VAL,Map the frame's DP level and QoS class to a DSCP value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
repeat.end
repeat 8. (increment 0x18C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_RNG_TYPE_CFG$2,VCAP Range Checkers Register $2"
bitfld.long 0x00 0.--2. "VCAP_RNG_CFG,VCAP range configuration" "Idle,TCP/UDP destination port,TCP/UDP source port,TCP/UDP both ports,VID,DSCP,?..."
repeat.end
repeat 8. (increment 0x1AC 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_RNG_VAL_CFG$2,Range Configuration Per Range Checker Register $2"
hexmask.long.word 0x00 16.--31. 1. "VCAP_RNG_MIN_VAL,VCAP range minimum value"
hexmask.long.word 0x00 0.--15. 1. "VCAP_RNG_MAX_VAL,VCAP range maximum value"
repeat.end
group.long 0x1D8++0x07
line.long 0x00 "DISCARD_CFG,Various Options For Discard Filters Register"
bitfld.long 0x00 1. "DROP_TAGGING_S2_ENA,Frames discarded due to wrong tagging will still allow S2 lookup enable" "Disabled,Enabled"
bitfld.long 0x00 0. "DROP_CTRLPROT_S2_ENA,Frames discarded with L2/L3 protocol filter will still allow S2 lookup enable" "Disabled,Enabled"
line.long 0x04 "FID_CFG,FID Selector Configuration Register"
bitfld.long 0x04 0. "VID_MC_ENA,VID instead of the FID usage enable" "Disabled,Enabled"
tree.end
base ad:0x1FC000000+0x280000+0x4000
tree "ES_ANA_POL Registers"
repeat 384. (increment 0x00 0x20)(increment 0 1)
group.long $1++0x13 "POL Instance No. $2"
line.long 0x00 "PIR_CFG,Excess Configuration Register"
hexmask.long.tbyte 0x00 6.--20. 1. "PIR_RATE,Excess information rate"
bitfld.long 0x00 0.--5. "PIR_BURST,Excess burst size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,?..."
line.long 0x04 "CIR_CFG,Committed Configuration Register"
hexmask.long.tbyte 0x04 6.--20. 1. "CIR_RATE,Committed information rate"
bitfld.long 0x04 0.--5. "CIR_BURST,Committed burst size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,?..."
line.long 0x08 "MODE_CFG,Common Configuration For This Policer Register"
bitfld.long 0x08 5.--9. "IPG_SIZE,Size of interframe gap to add to each frame" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x08 3.--4. "FRM_MODE,Accounting mode of the policer" "Line rate,Data rate,Frame rate 33 1/3,Frame rate 1/3"
bitfld.long 0x08 2. "DLB_COUPLED,Coupling flag" "Disabled,Enabled"
bitfld.long 0x08 1. "CIR_ENA,Enable dual leaky bucket mode" "Disabled,Enabled"
line.long 0x0C "PIR_STATE,Excess State Of The Policer Register"
hexmask.long.tbyte 0x0C 0.--21. 1. "PIR_LVL,Current fill level of the excess bucket"
line.long 0x10 "CIR_STATE,Committed State Of The Policer Register"
hexmask.long.tbyte 0x10 0.--21. 1. "CIR_LVL,Current fill level of the committed bucket"
repeat.end
tree.end
base ad:0x1FC000000+0x280000+0x8C48
tree "ES_ANA_POL_MISC Registers"
repeat 7. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "FLOWC$2,Flow Control Configuration Per Front Port Register $2"
bitfld.long 0x00 0. "POL_FLOWC,Flow control enable" "Disabled,Enabled"
repeat.end
group.long 0x6C++0x03
line.long 0x00 "POL_HYST,Set Flow Control Hysteresis Register"
bitfld.long 0x00 4.--9. "POL_FC_HYST,Set hysteresis for when to re-open a bucket after the burst capacity has been used [in kilobytes]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--3. "POL_DROP_HYST,Set hysteresis for when to re-open a bucket after the burst capacity has been used [in kilobytes]" "0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,30"
tree.end
tree.end
tree "DEV_GMII"
tree "DEV_GMII[0]"
base ad:0x1FC000000+0x100000
tree "ES_DEV_GMII_PORT_MODE Registers"
group.long 0x00++0x07
line.long 0x00 "CLOCK_CFG,Link Speed Configuration And Reset"
bitfld.long 0x00 5. "MAC_TX_RST,Reset Tx direction in MAC" "No reset,Reset"
bitfld.long 0x00 4. "MAC_RX_RST,Reset Rx direction in MAC" "No reset,Reset"
bitfld.long 0x00 3. "PORT_RST,Reset port module" "No reset,Reset"
bitfld.long 0x00 0.--1. "LINK_SPEED,Selects the link speed" "No link,1000/2500Mbps,100Mbps,10Mbps"
line.long 0x04 "PORT_MISC,Loop Configuration And Error Frame Handling"
bitfld.long 0x04 3. "FWD_PAUSE_ENA,Forward pause frames enable" "Disabled,Enabled"
bitfld.long 0x04 2. "FWD_CTRL_ENA,Forward MAC control frames enable" "Disabled,Enabled"
bitfld.long 0x04 1. "GMII_LOOP_ENA,Loop GMII transmit directly enable" "Disabled,Enabled"
bitfld.long 0x04 0. "DEV_LOOP_ENA,Loop the device bus enable" "Disabled,Enabled"
group.long 0x0C++0x0B
line.long 0x00 "EEE_CFG,Control Energy Efficient Ethernet Operation"
bitfld.long 0x00 22. "EEE_ENA,Enable EEE operation on the port" "Disabled,Enabled"
hexmask.long.word 0x00 15.--21. 1. "EEE_TIMER_AGE,Maximum time frames in any queue must wait before the port is activated"
hexmask.long.byte 0x00 8.--14. 1. "EEE_TIMER_WAKEUP,Time from the egress port is activated until frame transmission is restarted"
hexmask.long.byte 0x00 1.--7. 1. "EEE_TIMER_HOLDOFF,Timer passed value"
newline
bitfld.long 0x00 0. "PORT_LPI,Port is in low-power-idle" "No,Yes"
line.long 0x04 "RX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x04 0.--23. 1. "RX_PATH_DELAY,Delay through the local system receive patch"
line.long 0x08 "TX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x08 0.--23. 1. "TX_PATH_DELAY,Delay through the local system receive patch"
tree.end
base ad:0x1FC000000+0x100000+0x1C
tree "ES_DEV_GMII_MAC_CFG_STATUS Registers"
group.long 0x00++0x1B
line.long 0x00 "MAC_ENA_CFG,Enable Configuration"
bitfld.long 0x00 4. "RX_ENA,Receiver module enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_ENA,Transmitter module enable" "Disabled,Enabled"
line.long 0x04 "MAC_MODE_CFG,Mode Configuration"
bitfld.long 0x04 0. "FDX_ENA,Enable full-duplex" "Disabled,Enabled"
line.long 0x08 "MAC_MAXLEN_CFG,Max Length Configuration"
hexmask.long.word 0x08 0.--15. 1. "MAX_LEN,Maximum frame length in bytes accepted by the MAC"
line.long 0x0C "MAC_TAGS_CFG,VLAN/Service Tag Configuration"
hexmask.long.word 0x0C 16.--31. 1. "TAG_ID,EtherTypes recognized as a VLAN TPID"
bitfld.long 0x0C 2. "VLAN_LEN_AWR_ENA,Enable allow single tagged frames to by 4 bytes longer than MAC_MAXLEN_CFG" "Disabled,Enabled"
bitfld.long 0x0C 1. "VLAN_DBL_AWR_ENA,Enable double tagged frames" "Disabled,Enabled"
newline
bitfld.long 0x0C 0. "VLAN_AWR_ENA,Enable single tagged frames" "Disabled,Enabled"
line.long 0x10 "MAC_ADV_CHK_CFG,Advanced Check Feature Configuration"
bitfld.long 0x10 0. "LEN_DROP_ENA,Length drop enable" "Disabled,Enabled"
line.long 0x14 "MAC_IFG_CFG,Inter Frame Gap Configuration Register"
bitfld.long 0x14 8.--12. "TX_IFG,Inter-frame gap in the Tx direction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 4.--7. "RX_IFG2,Duration of the second part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x14 0.--3. "RX_IFG1,Duration of the first part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "MAC_HDX_CFG,Half-Duplex Configuration"
bitfld.long 0x18 24. "WEXC_DIS,Disable back off" "No,Yes"
hexmask.long.byte 0x18 16.--23. 1. "SEED,Seed value"
bitfld.long 0x18 12. "SEED_LOAD,Load SEED value into PRNG register" "Not loaded,Loaded"
newline
bitfld.long 0x18 8. "RETRY_AFTER_EXC_COL_ENA,MAC retransmit a frame after early collision enable" "Disabled,Enabled"
hexmask.long.byte 0x18 0.--6. 1. "LATE_COL_POS,Adjustment of early/late collision boundary"
group.long 0x20++0x0B
line.long 0x00 "MAC_FC_MAC_LOW_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x00 0.--23. 1. "MAC_LOW,Lower three bytes in the SMAC"
line.long 0x04 "MAC_FC_MAC_HIGH_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x04 0.--23. 1. "MAC_HIGH,Higher three bytes in the SMAC"
line.long 0x08 "MAC_STICKY,Sticky Bit"
eventfld.long 0x08 9. "RX_IPG_SHRINK_STICKY,Inter packet gap sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 8. "RX_PREAM_SHRINK_STICKY,Preamble shrink detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 7. "RX_CARRIER_EXT_STICKY,Carrier extend detected sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 6. "RX_CARRIER_EXT_ERR_STICKY,Carrier extend error detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 5. "RX_JUNK_STICKY,Junk receive sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 4. "TX_RETRANSMIT_STICKY,Transmit MAC asked the host for a frame retransmission sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 3. "TX_JAM_STICKY,Transmit host issued a jamming signal sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 2. "TX_FIFO_OFLW_STICKY,MAC transmit FIFO overrun sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 1. "TX_FRM_LEN_OVR_STICKY,Transmit frame length overrun sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 0. "TX_ABORT_STICKY,Transmit host initiated abort sticky bit" "Not cleared,Cleared"
tree.end
base ad:0x1FC000000+0x100000+0x48
tree "ES_DEV_GMII_MM_CONFIG Registers"
group.long 0x00++0x07
line.long 0x00 "ENABLE_CONFIG,Enables The MAC Merge Layer For This Port"
bitfld.long 0x00 8. "KEEP_S_AFTER_D,MM receiver waiting for SMD-C will be processed or discarded" "Discarded,Processed"
bitfld.long 0x00 4. "MM_TX_ENA,Enable the MAC_MERGE layer transmit block" "Disabled,Enabled"
bitfld.long 0x00 0. "MM_RX_ENA,Enable the MAC_MERGE layer receive block" "Disabled,Enabled"
line.long 0x04 "VERIF_CONFIG,Configuration To Control The Preemption Verification-Response Of Port"
hexmask.long.byte 0x04 4.--11. 1. "PRM_VERIFY_TIME,Wait time between verification attempts"
bitfld.long 0x04 0. "PRM_VERIFY_DIS,Disable the verification of preemption capabilities of link partner" "No,Yes"
tree.end
base ad:0x1FC000000+0x100000+0x50
tree "ES_DEV_GMII_MM_STATISTICS Registers"
group.long 0x00++0x03
line.long 0x00 "MM_STATUS,Status of MAC Merge Layer Of This Port"
rbitfld.long 0x00 28. "MM_TX_PRMPT_STATUS,P-Frame is being preempted from this MM TX MAC" "Not preempted,Preempted"
rbitfld.long 0x00 24. "MM_TX_FRAME_STATUS,Last transmitted frame by MM was from P-MAC or E-MAC" "E-MAC,P-MAC"
rbitfld.long 0x00 20. "MM_RX_FRAME_STATUS,Last received frame by MM was delivered to P-MAC" "0,1"
newline
eventfld.long 0x00 16. "UNEXP_TX_PFRM_STICKY,P-Fragmented request to be transmitted sticky bit" "Not cleared,Cleared"
eventfld.long 0x00 12. "UNEXP_RX_PFRM_STICKY,Unexpected P-Frame receive sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 8.--10. "PRMPT_VERIFY_STATE,Status of MAC merge sub-layer" "Initial,Verifying,Successful,Failed,Disabled,?..."
newline
eventfld.long 0x00 4. "PRMPT_ACTIVE_STICKY,Change in preemption state sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 0. "PRMPT_ACTIVE_STATUS,Preemption is currently active on this port" "Not active,Active"
tree.end
tree.end
tree "DEV_GMII[1]"
base ad:0x1FC000000+0x110000
tree "ES_DEV_GMII_PORT_MODE Registers"
group.long 0x00++0x07
line.long 0x00 "CLOCK_CFG,Link Speed Configuration And Reset"
bitfld.long 0x00 5. "MAC_TX_RST,Reset Tx direction in MAC" "No reset,Reset"
bitfld.long 0x00 4. "MAC_RX_RST,Reset Rx direction in MAC" "No reset,Reset"
bitfld.long 0x00 3. "PORT_RST,Reset port module" "No reset,Reset"
bitfld.long 0x00 0.--1. "LINK_SPEED,Selects the link speed" "No link,1000/2500Mbps,100Mbps,10Mbps"
line.long 0x04 "PORT_MISC,Loop Configuration And Error Frame Handling"
bitfld.long 0x04 3. "FWD_PAUSE_ENA,Forward pause frames enable" "Disabled,Enabled"
bitfld.long 0x04 2. "FWD_CTRL_ENA,Forward MAC control frames enable" "Disabled,Enabled"
bitfld.long 0x04 1. "GMII_LOOP_ENA,Loop GMII transmit directly enable" "Disabled,Enabled"
bitfld.long 0x04 0. "DEV_LOOP_ENA,Loop the device bus enable" "Disabled,Enabled"
group.long 0x0C++0x0B
line.long 0x00 "EEE_CFG,Control Energy Efficient Ethernet Operation"
bitfld.long 0x00 22. "EEE_ENA,Enable EEE operation on the port" "Disabled,Enabled"
hexmask.long.word 0x00 15.--21. 1. "EEE_TIMER_AGE,Maximum time frames in any queue must wait before the port is activated"
hexmask.long.byte 0x00 8.--14. 1. "EEE_TIMER_WAKEUP,Time from the egress port is activated until frame transmission is restarted"
hexmask.long.byte 0x00 1.--7. 1. "EEE_TIMER_HOLDOFF,Timer passed value"
newline
bitfld.long 0x00 0. "PORT_LPI,Port is in low-power-idle" "No,Yes"
line.long 0x04 "RX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x04 0.--23. 1. "RX_PATH_DELAY,Delay through the local system receive patch"
line.long 0x08 "TX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x08 0.--23. 1. "TX_PATH_DELAY,Delay through the local system receive patch"
tree.end
base ad:0x1FC000000+0x110000+0x1C
tree "ES_DEV_GMII_MAC_CFG_STATUS Registers"
group.long 0x00++0x1B
line.long 0x00 "MAC_ENA_CFG,Enable Configuration"
bitfld.long 0x00 4. "RX_ENA,Receiver module enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_ENA,Transmitter module enable" "Disabled,Enabled"
line.long 0x04 "MAC_MODE_CFG,Mode Configuration"
bitfld.long 0x04 0. "FDX_ENA,Enable full-duplex" "Disabled,Enabled"
line.long 0x08 "MAC_MAXLEN_CFG,Max Length Configuration"
hexmask.long.word 0x08 0.--15. 1. "MAX_LEN,Maximum frame length in bytes accepted by the MAC"
line.long 0x0C "MAC_TAGS_CFG,VLAN/Service Tag Configuration"
hexmask.long.word 0x0C 16.--31. 1. "TAG_ID,EtherTypes recognized as a VLAN TPID"
bitfld.long 0x0C 2. "VLAN_LEN_AWR_ENA,Enable allow single tagged frames to by 4 bytes longer than MAC_MAXLEN_CFG" "Disabled,Enabled"
bitfld.long 0x0C 1. "VLAN_DBL_AWR_ENA,Enable double tagged frames" "Disabled,Enabled"
newline
bitfld.long 0x0C 0. "VLAN_AWR_ENA,Enable single tagged frames" "Disabled,Enabled"
line.long 0x10 "MAC_ADV_CHK_CFG,Advanced Check Feature Configuration"
bitfld.long 0x10 0. "LEN_DROP_ENA,Length drop enable" "Disabled,Enabled"
line.long 0x14 "MAC_IFG_CFG,Inter Frame Gap Configuration Register"
bitfld.long 0x14 8.--12. "TX_IFG,Inter-frame gap in the Tx direction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 4.--7. "RX_IFG2,Duration of the second part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x14 0.--3. "RX_IFG1,Duration of the first part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "MAC_HDX_CFG,Half-Duplex Configuration"
bitfld.long 0x18 24. "WEXC_DIS,Disable back off" "No,Yes"
hexmask.long.byte 0x18 16.--23. 1. "SEED,Seed value"
bitfld.long 0x18 12. "SEED_LOAD,Load SEED value into PRNG register" "Not loaded,Loaded"
newline
bitfld.long 0x18 8. "RETRY_AFTER_EXC_COL_ENA,MAC retransmit a frame after early collision enable" "Disabled,Enabled"
hexmask.long.byte 0x18 0.--6. 1. "LATE_COL_POS,Adjustment of early/late collision boundary"
group.long 0x20++0x0B
line.long 0x00 "MAC_FC_MAC_LOW_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x00 0.--23. 1. "MAC_LOW,Lower three bytes in the SMAC"
line.long 0x04 "MAC_FC_MAC_HIGH_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x04 0.--23. 1. "MAC_HIGH,Higher three bytes in the SMAC"
line.long 0x08 "MAC_STICKY,Sticky Bit"
eventfld.long 0x08 9. "RX_IPG_SHRINK_STICKY,Inter packet gap sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 8. "RX_PREAM_SHRINK_STICKY,Preamble shrink detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 7. "RX_CARRIER_EXT_STICKY,Carrier extend detected sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 6. "RX_CARRIER_EXT_ERR_STICKY,Carrier extend error detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 5. "RX_JUNK_STICKY,Junk receive sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 4. "TX_RETRANSMIT_STICKY,Transmit MAC asked the host for a frame retransmission sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 3. "TX_JAM_STICKY,Transmit host issued a jamming signal sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 2. "TX_FIFO_OFLW_STICKY,MAC transmit FIFO overrun sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 1. "TX_FRM_LEN_OVR_STICKY,Transmit frame length overrun sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 0. "TX_ABORT_STICKY,Transmit host initiated abort sticky bit" "Not cleared,Cleared"
tree.end
base ad:0x1FC000000+0x110000+0x48
tree "ES_DEV_GMII_MM_CONFIG Registers"
group.long 0x00++0x07
line.long 0x00 "ENABLE_CONFIG,Enables The MAC Merge Layer For This Port"
bitfld.long 0x00 8. "KEEP_S_AFTER_D,MM receiver waiting for SMD-C will be processed or discarded" "Discarded,Processed"
bitfld.long 0x00 4. "MM_TX_ENA,Enable the MAC_MERGE layer transmit block" "Disabled,Enabled"
bitfld.long 0x00 0. "MM_RX_ENA,Enable the MAC_MERGE layer receive block" "Disabled,Enabled"
line.long 0x04 "VERIF_CONFIG,Configuration To Control The Preemption Verification-Response Of Port"
hexmask.long.byte 0x04 4.--11. 1. "PRM_VERIFY_TIME,Wait time between verification attempts"
bitfld.long 0x04 0. "PRM_VERIFY_DIS,Disable the verification of preemption capabilities of link partner" "No,Yes"
tree.end
base ad:0x1FC000000+0x110000+0x50
tree "ES_DEV_GMII_MM_STATISTICS Registers"
group.long 0x00++0x03
line.long 0x00 "MM_STATUS,Status of MAC Merge Layer Of This Port"
rbitfld.long 0x00 28. "MM_TX_PRMPT_STATUS,P-Frame is being preempted from this MM TX MAC" "Not preempted,Preempted"
rbitfld.long 0x00 24. "MM_TX_FRAME_STATUS,Last transmitted frame by MM was from P-MAC or E-MAC" "E-MAC,P-MAC"
rbitfld.long 0x00 20. "MM_RX_FRAME_STATUS,Last received frame by MM was delivered to P-MAC" "0,1"
newline
eventfld.long 0x00 16. "UNEXP_TX_PFRM_STICKY,P-Fragmented request to be transmitted sticky bit" "Not cleared,Cleared"
eventfld.long 0x00 12. "UNEXP_RX_PFRM_STICKY,Unexpected P-Frame receive sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 8.--10. "PRMPT_VERIFY_STATE,Status of MAC merge sub-layer" "Initial,Verifying,Successful,Failed,Disabled,?..."
newline
eventfld.long 0x00 4. "PRMPT_ACTIVE_STICKY,Change in preemption state sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 0. "PRMPT_ACTIVE_STATUS,Preemption is currently active on this port" "Not active,Active"
tree.end
tree.end
tree "DEV_GMII[2]"
base ad:0x1FC000000+0x120000
tree "ES_DEV_GMII_PORT_MODE Registers"
group.long 0x00++0x07
line.long 0x00 "CLOCK_CFG,Link Speed Configuration And Reset"
bitfld.long 0x00 5. "MAC_TX_RST,Reset Tx direction in MAC" "No reset,Reset"
bitfld.long 0x00 4. "MAC_RX_RST,Reset Rx direction in MAC" "No reset,Reset"
bitfld.long 0x00 3. "PORT_RST,Reset port module" "No reset,Reset"
bitfld.long 0x00 0.--1. "LINK_SPEED,Selects the link speed" "No link,1000/2500Mbps,100Mbps,10Mbps"
line.long 0x04 "PORT_MISC,Loop Configuration And Error Frame Handling"
bitfld.long 0x04 3. "FWD_PAUSE_ENA,Forward pause frames enable" "Disabled,Enabled"
bitfld.long 0x04 2. "FWD_CTRL_ENA,Forward MAC control frames enable" "Disabled,Enabled"
bitfld.long 0x04 1. "GMII_LOOP_ENA,Loop GMII transmit directly enable" "Disabled,Enabled"
bitfld.long 0x04 0. "DEV_LOOP_ENA,Loop the device bus enable" "Disabled,Enabled"
group.long 0x0C++0x0B
line.long 0x00 "EEE_CFG,Control Energy Efficient Ethernet Operation"
bitfld.long 0x00 22. "EEE_ENA,Enable EEE operation on the port" "Disabled,Enabled"
hexmask.long.word 0x00 15.--21. 1. "EEE_TIMER_AGE,Maximum time frames in any queue must wait before the port is activated"
hexmask.long.byte 0x00 8.--14. 1. "EEE_TIMER_WAKEUP,Time from the egress port is activated until frame transmission is restarted"
hexmask.long.byte 0x00 1.--7. 1. "EEE_TIMER_HOLDOFF,Timer passed value"
newline
bitfld.long 0x00 0. "PORT_LPI,Port is in low-power-idle" "No,Yes"
line.long 0x04 "RX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x04 0.--23. 1. "RX_PATH_DELAY,Delay through the local system receive patch"
line.long 0x08 "TX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x08 0.--23. 1. "TX_PATH_DELAY,Delay through the local system receive patch"
tree.end
base ad:0x1FC000000+0x120000+0x1C
tree "ES_DEV_GMII_MAC_CFG_STATUS Registers"
group.long 0x00++0x1B
line.long 0x00 "MAC_ENA_CFG,Enable Configuration"
bitfld.long 0x00 4. "RX_ENA,Receiver module enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_ENA,Transmitter module enable" "Disabled,Enabled"
line.long 0x04 "MAC_MODE_CFG,Mode Configuration"
bitfld.long 0x04 0. "FDX_ENA,Enable full-duplex" "Disabled,Enabled"
line.long 0x08 "MAC_MAXLEN_CFG,Max Length Configuration"
hexmask.long.word 0x08 0.--15. 1. "MAX_LEN,Maximum frame length in bytes accepted by the MAC"
line.long 0x0C "MAC_TAGS_CFG,VLAN/Service Tag Configuration"
hexmask.long.word 0x0C 16.--31. 1. "TAG_ID,EtherTypes recognized as a VLAN TPID"
bitfld.long 0x0C 2. "VLAN_LEN_AWR_ENA,Enable allow single tagged frames to by 4 bytes longer than MAC_MAXLEN_CFG" "Disabled,Enabled"
bitfld.long 0x0C 1. "VLAN_DBL_AWR_ENA,Enable double tagged frames" "Disabled,Enabled"
newline
bitfld.long 0x0C 0. "VLAN_AWR_ENA,Enable single tagged frames" "Disabled,Enabled"
line.long 0x10 "MAC_ADV_CHK_CFG,Advanced Check Feature Configuration"
bitfld.long 0x10 0. "LEN_DROP_ENA,Length drop enable" "Disabled,Enabled"
line.long 0x14 "MAC_IFG_CFG,Inter Frame Gap Configuration Register"
bitfld.long 0x14 8.--12. "TX_IFG,Inter-frame gap in the Tx direction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 4.--7. "RX_IFG2,Duration of the second part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x14 0.--3. "RX_IFG1,Duration of the first part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "MAC_HDX_CFG,Half-Duplex Configuration"
bitfld.long 0x18 24. "WEXC_DIS,Disable back off" "No,Yes"
hexmask.long.byte 0x18 16.--23. 1. "SEED,Seed value"
bitfld.long 0x18 12. "SEED_LOAD,Load SEED value into PRNG register" "Not loaded,Loaded"
newline
bitfld.long 0x18 8. "RETRY_AFTER_EXC_COL_ENA,MAC retransmit a frame after early collision enable" "Disabled,Enabled"
hexmask.long.byte 0x18 0.--6. 1. "LATE_COL_POS,Adjustment of early/late collision boundary"
group.long 0x20++0x0B
line.long 0x00 "MAC_FC_MAC_LOW_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x00 0.--23. 1. "MAC_LOW,Lower three bytes in the SMAC"
line.long 0x04 "MAC_FC_MAC_HIGH_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x04 0.--23. 1. "MAC_HIGH,Higher three bytes in the SMAC"
line.long 0x08 "MAC_STICKY,Sticky Bit"
eventfld.long 0x08 9. "RX_IPG_SHRINK_STICKY,Inter packet gap sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 8. "RX_PREAM_SHRINK_STICKY,Preamble shrink detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 7. "RX_CARRIER_EXT_STICKY,Carrier extend detected sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 6. "RX_CARRIER_EXT_ERR_STICKY,Carrier extend error detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 5. "RX_JUNK_STICKY,Junk receive sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 4. "TX_RETRANSMIT_STICKY,Transmit MAC asked the host for a frame retransmission sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 3. "TX_JAM_STICKY,Transmit host issued a jamming signal sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 2. "TX_FIFO_OFLW_STICKY,MAC transmit FIFO overrun sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 1. "TX_FRM_LEN_OVR_STICKY,Transmit frame length overrun sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 0. "TX_ABORT_STICKY,Transmit host initiated abort sticky bit" "Not cleared,Cleared"
tree.end
base ad:0x1FC000000+0x120000+0x48
tree "ES_DEV_GMII_MM_CONFIG Registers"
group.long 0x00++0x07
line.long 0x00 "ENABLE_CONFIG,Enables The MAC Merge Layer For This Port"
bitfld.long 0x00 8. "KEEP_S_AFTER_D,MM receiver waiting for SMD-C will be processed or discarded" "Discarded,Processed"
bitfld.long 0x00 4. "MM_TX_ENA,Enable the MAC_MERGE layer transmit block" "Disabled,Enabled"
bitfld.long 0x00 0. "MM_RX_ENA,Enable the MAC_MERGE layer receive block" "Disabled,Enabled"
line.long 0x04 "VERIF_CONFIG,Configuration To Control The Preemption Verification-Response Of Port"
hexmask.long.byte 0x04 4.--11. 1. "PRM_VERIFY_TIME,Wait time between verification attempts"
bitfld.long 0x04 0. "PRM_VERIFY_DIS,Disable the verification of preemption capabilities of link partner" "No,Yes"
tree.end
base ad:0x1FC000000+0x120000+0x50
tree "ES_DEV_GMII_MM_STATISTICS Registers"
group.long 0x00++0x03
line.long 0x00 "MM_STATUS,Status of MAC Merge Layer Of This Port"
rbitfld.long 0x00 28. "MM_TX_PRMPT_STATUS,P-Frame is being preempted from this MM TX MAC" "Not preempted,Preempted"
rbitfld.long 0x00 24. "MM_TX_FRAME_STATUS,Last transmitted frame by MM was from P-MAC or E-MAC" "E-MAC,P-MAC"
rbitfld.long 0x00 20. "MM_RX_FRAME_STATUS,Last received frame by MM was delivered to P-MAC" "0,1"
newline
eventfld.long 0x00 16. "UNEXP_TX_PFRM_STICKY,P-Fragmented request to be transmitted sticky bit" "Not cleared,Cleared"
eventfld.long 0x00 12. "UNEXP_RX_PFRM_STICKY,Unexpected P-Frame receive sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 8.--10. "PRMPT_VERIFY_STATE,Status of MAC merge sub-layer" "Initial,Verifying,Successful,Failed,Disabled,?..."
newline
eventfld.long 0x00 4. "PRMPT_ACTIVE_STICKY,Change in preemption state sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 0. "PRMPT_ACTIVE_STATUS,Preemption is currently active on this port" "Not active,Active"
tree.end
tree.end
tree "DEV_GMII[3]"
base ad:0x1FC000000+0x130000
tree "ES_DEV_GMII_PORT_MODE Registers"
group.long 0x00++0x07
line.long 0x00 "CLOCK_CFG,Link Speed Configuration And Reset"
bitfld.long 0x00 5. "MAC_TX_RST,Reset Tx direction in MAC" "No reset,Reset"
bitfld.long 0x00 4. "MAC_RX_RST,Reset Rx direction in MAC" "No reset,Reset"
bitfld.long 0x00 3. "PORT_RST,Reset port module" "No reset,Reset"
bitfld.long 0x00 0.--1. "LINK_SPEED,Selects the link speed" "No link,1000/2500Mbps,100Mbps,10Mbps"
line.long 0x04 "PORT_MISC,Loop Configuration And Error Frame Handling"
bitfld.long 0x04 3. "FWD_PAUSE_ENA,Forward pause frames enable" "Disabled,Enabled"
bitfld.long 0x04 2. "FWD_CTRL_ENA,Forward MAC control frames enable" "Disabled,Enabled"
bitfld.long 0x04 1. "GMII_LOOP_ENA,Loop GMII transmit directly enable" "Disabled,Enabled"
bitfld.long 0x04 0. "DEV_LOOP_ENA,Loop the device bus enable" "Disabled,Enabled"
group.long 0x0C++0x0B
line.long 0x00 "EEE_CFG,Control Energy Efficient Ethernet Operation"
bitfld.long 0x00 22. "EEE_ENA,Enable EEE operation on the port" "Disabled,Enabled"
hexmask.long.word 0x00 15.--21. 1. "EEE_TIMER_AGE,Maximum time frames in any queue must wait before the port is activated"
hexmask.long.byte 0x00 8.--14. 1. "EEE_TIMER_WAKEUP,Time from the egress port is activated until frame transmission is restarted"
hexmask.long.byte 0x00 1.--7. 1. "EEE_TIMER_HOLDOFF,Timer passed value"
newline
bitfld.long 0x00 0. "PORT_LPI,Port is in low-power-idle" "No,Yes"
line.long 0x04 "RX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x04 0.--23. 1. "RX_PATH_DELAY,Delay through the local system receive patch"
line.long 0x08 "TX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x08 0.--23. 1. "TX_PATH_DELAY,Delay through the local system receive patch"
tree.end
base ad:0x1FC000000+0x130000+0x1C
tree "ES_DEV_GMII_MAC_CFG_STATUS Registers"
group.long 0x00++0x1B
line.long 0x00 "MAC_ENA_CFG,Enable Configuration"
bitfld.long 0x00 4. "RX_ENA,Receiver module enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_ENA,Transmitter module enable" "Disabled,Enabled"
line.long 0x04 "MAC_MODE_CFG,Mode Configuration"
bitfld.long 0x04 0. "FDX_ENA,Enable full-duplex" "Disabled,Enabled"
line.long 0x08 "MAC_MAXLEN_CFG,Max Length Configuration"
hexmask.long.word 0x08 0.--15. 1. "MAX_LEN,Maximum frame length in bytes accepted by the MAC"
line.long 0x0C "MAC_TAGS_CFG,VLAN/Service Tag Configuration"
hexmask.long.word 0x0C 16.--31. 1. "TAG_ID,EtherTypes recognized as a VLAN TPID"
bitfld.long 0x0C 2. "VLAN_LEN_AWR_ENA,Enable allow single tagged frames to by 4 bytes longer than MAC_MAXLEN_CFG" "Disabled,Enabled"
bitfld.long 0x0C 1. "VLAN_DBL_AWR_ENA,Enable double tagged frames" "Disabled,Enabled"
newline
bitfld.long 0x0C 0. "VLAN_AWR_ENA,Enable single tagged frames" "Disabled,Enabled"
line.long 0x10 "MAC_ADV_CHK_CFG,Advanced Check Feature Configuration"
bitfld.long 0x10 0. "LEN_DROP_ENA,Length drop enable" "Disabled,Enabled"
line.long 0x14 "MAC_IFG_CFG,Inter Frame Gap Configuration Register"
bitfld.long 0x14 8.--12. "TX_IFG,Inter-frame gap in the Tx direction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 4.--7. "RX_IFG2,Duration of the second part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x14 0.--3. "RX_IFG1,Duration of the first part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "MAC_HDX_CFG,Half-Duplex Configuration"
bitfld.long 0x18 24. "WEXC_DIS,Disable back off" "No,Yes"
hexmask.long.byte 0x18 16.--23. 1. "SEED,Seed value"
bitfld.long 0x18 12. "SEED_LOAD,Load SEED value into PRNG register" "Not loaded,Loaded"
newline
bitfld.long 0x18 8. "RETRY_AFTER_EXC_COL_ENA,MAC retransmit a frame after early collision enable" "Disabled,Enabled"
hexmask.long.byte 0x18 0.--6. 1. "LATE_COL_POS,Adjustment of early/late collision boundary"
group.long 0x20++0x0B
line.long 0x00 "MAC_FC_MAC_LOW_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x00 0.--23. 1. "MAC_LOW,Lower three bytes in the SMAC"
line.long 0x04 "MAC_FC_MAC_HIGH_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x04 0.--23. 1. "MAC_HIGH,Higher three bytes in the SMAC"
line.long 0x08 "MAC_STICKY,Sticky Bit"
eventfld.long 0x08 9. "RX_IPG_SHRINK_STICKY,Inter packet gap sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 8. "RX_PREAM_SHRINK_STICKY,Preamble shrink detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 7. "RX_CARRIER_EXT_STICKY,Carrier extend detected sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 6. "RX_CARRIER_EXT_ERR_STICKY,Carrier extend error detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 5. "RX_JUNK_STICKY,Junk receive sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 4. "TX_RETRANSMIT_STICKY,Transmit MAC asked the host for a frame retransmission sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 3. "TX_JAM_STICKY,Transmit host issued a jamming signal sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 2. "TX_FIFO_OFLW_STICKY,MAC transmit FIFO overrun sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 1. "TX_FRM_LEN_OVR_STICKY,Transmit frame length overrun sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 0. "TX_ABORT_STICKY,Transmit host initiated abort sticky bit" "Not cleared,Cleared"
tree.end
base ad:0x1FC000000+0x130000+0x48
tree "ES_DEV_GMII_MM_CONFIG Registers"
group.long 0x00++0x07
line.long 0x00 "ENABLE_CONFIG,Enables The MAC Merge Layer For This Port"
bitfld.long 0x00 8. "KEEP_S_AFTER_D,MM receiver waiting for SMD-C will be processed or discarded" "Discarded,Processed"
bitfld.long 0x00 4. "MM_TX_ENA,Enable the MAC_MERGE layer transmit block" "Disabled,Enabled"
bitfld.long 0x00 0. "MM_RX_ENA,Enable the MAC_MERGE layer receive block" "Disabled,Enabled"
line.long 0x04 "VERIF_CONFIG,Configuration To Control The Preemption Verification-Response Of Port"
hexmask.long.byte 0x04 4.--11. 1. "PRM_VERIFY_TIME,Wait time between verification attempts"
bitfld.long 0x04 0. "PRM_VERIFY_DIS,Disable the verification of preemption capabilities of link partner" "No,Yes"
tree.end
base ad:0x1FC000000+0x130000+0x50
tree "ES_DEV_GMII_MM_STATISTICS Registers"
group.long 0x00++0x03
line.long 0x00 "MM_STATUS,Status of MAC Merge Layer Of This Port"
rbitfld.long 0x00 28. "MM_TX_PRMPT_STATUS,P-Frame is being preempted from this MM TX MAC" "Not preempted,Preempted"
rbitfld.long 0x00 24. "MM_TX_FRAME_STATUS,Last transmitted frame by MM was from P-MAC or E-MAC" "E-MAC,P-MAC"
rbitfld.long 0x00 20. "MM_RX_FRAME_STATUS,Last received frame by MM was delivered to P-MAC" "0,1"
newline
eventfld.long 0x00 16. "UNEXP_TX_PFRM_STICKY,P-Fragmented request to be transmitted sticky bit" "Not cleared,Cleared"
eventfld.long 0x00 12. "UNEXP_RX_PFRM_STICKY,Unexpected P-Frame receive sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 8.--10. "PRMPT_VERIFY_STATE,Status of MAC merge sub-layer" "Initial,Verifying,Successful,Failed,Disabled,?..."
newline
eventfld.long 0x00 4. "PRMPT_ACTIVE_STICKY,Change in preemption state sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 0. "PRMPT_ACTIVE_STATUS,Preemption is currently active on this port" "Not active,Active"
tree.end
tree.end
tree "DEV_GMII[4]"
base ad:0x1FC000000+0x140000
tree "ES_DEV_GMII_PORT_MODE Registers"
group.long 0x00++0x07
line.long 0x00 "CLOCK_CFG,Link Speed Configuration And Reset"
bitfld.long 0x00 5. "MAC_TX_RST,Reset Tx direction in MAC" "No reset,Reset"
bitfld.long 0x00 4. "MAC_RX_RST,Reset Rx direction in MAC" "No reset,Reset"
bitfld.long 0x00 3. "PORT_RST,Reset port module" "No reset,Reset"
bitfld.long 0x00 0.--1. "LINK_SPEED,Selects the link speed" "No link,1000/2500Mbps,100Mbps,10Mbps"
line.long 0x04 "PORT_MISC,Loop Configuration And Error Frame Handling"
bitfld.long 0x04 3. "FWD_PAUSE_ENA,Forward pause frames enable" "Disabled,Enabled"
bitfld.long 0x04 2. "FWD_CTRL_ENA,Forward MAC control frames enable" "Disabled,Enabled"
bitfld.long 0x04 1. "GMII_LOOP_ENA,Loop GMII transmit directly enable" "Disabled,Enabled"
bitfld.long 0x04 0. "DEV_LOOP_ENA,Loop the device bus enable" "Disabled,Enabled"
group.long 0x0C++0x0B
line.long 0x00 "EEE_CFG,Control Energy Efficient Ethernet Operation"
bitfld.long 0x00 22. "EEE_ENA,Enable EEE operation on the port" "Disabled,Enabled"
hexmask.long.word 0x00 15.--21. 1. "EEE_TIMER_AGE,Maximum time frames in any queue must wait before the port is activated"
hexmask.long.byte 0x00 8.--14. 1. "EEE_TIMER_WAKEUP,Time from the egress port is activated until frame transmission is restarted"
hexmask.long.byte 0x00 1.--7. 1. "EEE_TIMER_HOLDOFF,Timer passed value"
newline
bitfld.long 0x00 0. "PORT_LPI,Port is in low-power-idle" "No,Yes"
line.long 0x04 "RX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x04 0.--23. 1. "RX_PATH_DELAY,Delay through the local system receive patch"
line.long 0x08 "TX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x08 0.--23. 1. "TX_PATH_DELAY,Delay through the local system receive patch"
tree.end
base ad:0x1FC000000+0x140000+0x1C
tree "ES_DEV_GMII_MAC_CFG_STATUS Registers"
group.long 0x00++0x1B
line.long 0x00 "MAC_ENA_CFG,Enable Configuration"
bitfld.long 0x00 4. "RX_ENA,Receiver module enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_ENA,Transmitter module enable" "Disabled,Enabled"
line.long 0x04 "MAC_MODE_CFG,Mode Configuration"
bitfld.long 0x04 0. "FDX_ENA,Enable full-duplex" "Disabled,Enabled"
line.long 0x08 "MAC_MAXLEN_CFG,Max Length Configuration"
hexmask.long.word 0x08 0.--15. 1. "MAX_LEN,Maximum frame length in bytes accepted by the MAC"
line.long 0x0C "MAC_TAGS_CFG,VLAN/Service Tag Configuration"
hexmask.long.word 0x0C 16.--31. 1. "TAG_ID,EtherTypes recognized as a VLAN TPID"
bitfld.long 0x0C 2. "VLAN_LEN_AWR_ENA,Enable allow single tagged frames to by 4 bytes longer than MAC_MAXLEN_CFG" "Disabled,Enabled"
bitfld.long 0x0C 1. "VLAN_DBL_AWR_ENA,Enable double tagged frames" "Disabled,Enabled"
newline
bitfld.long 0x0C 0. "VLAN_AWR_ENA,Enable single tagged frames" "Disabled,Enabled"
line.long 0x10 "MAC_ADV_CHK_CFG,Advanced Check Feature Configuration"
bitfld.long 0x10 0. "LEN_DROP_ENA,Length drop enable" "Disabled,Enabled"
line.long 0x14 "MAC_IFG_CFG,Inter Frame Gap Configuration Register"
bitfld.long 0x14 8.--12. "TX_IFG,Inter-frame gap in the Tx direction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 4.--7. "RX_IFG2,Duration of the second part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x14 0.--3. "RX_IFG1,Duration of the first part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "MAC_HDX_CFG,Half-Duplex Configuration"
bitfld.long 0x18 24. "WEXC_DIS,Disable back off" "No,Yes"
hexmask.long.byte 0x18 16.--23. 1. "SEED,Seed value"
bitfld.long 0x18 12. "SEED_LOAD,Load SEED value into PRNG register" "Not loaded,Loaded"
newline
bitfld.long 0x18 8. "RETRY_AFTER_EXC_COL_ENA,MAC retransmit a frame after early collision enable" "Disabled,Enabled"
hexmask.long.byte 0x18 0.--6. 1. "LATE_COL_POS,Adjustment of early/late collision boundary"
group.long 0x20++0x0B
line.long 0x00 "MAC_FC_MAC_LOW_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x00 0.--23. 1. "MAC_LOW,Lower three bytes in the SMAC"
line.long 0x04 "MAC_FC_MAC_HIGH_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x04 0.--23. 1. "MAC_HIGH,Higher three bytes in the SMAC"
line.long 0x08 "MAC_STICKY,Sticky Bit"
eventfld.long 0x08 9. "RX_IPG_SHRINK_STICKY,Inter packet gap sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 8. "RX_PREAM_SHRINK_STICKY,Preamble shrink detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 7. "RX_CARRIER_EXT_STICKY,Carrier extend detected sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 6. "RX_CARRIER_EXT_ERR_STICKY,Carrier extend error detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 5. "RX_JUNK_STICKY,Junk receive sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 4. "TX_RETRANSMIT_STICKY,Transmit MAC asked the host for a frame retransmission sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 3. "TX_JAM_STICKY,Transmit host issued a jamming signal sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 2. "TX_FIFO_OFLW_STICKY,MAC transmit FIFO overrun sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 1. "TX_FRM_LEN_OVR_STICKY,Transmit frame length overrun sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 0. "TX_ABORT_STICKY,Transmit host initiated abort sticky bit" "Not cleared,Cleared"
tree.end
base ad:0x1FC000000+0x140000+0x48
tree "ES_DEV_GMII_MM_CONFIG Registers"
group.long 0x00++0x07
line.long 0x00 "ENABLE_CONFIG,Enables The MAC Merge Layer For This Port"
bitfld.long 0x00 8. "KEEP_S_AFTER_D,MM receiver waiting for SMD-C will be processed or discarded" "Discarded,Processed"
bitfld.long 0x00 4. "MM_TX_ENA,Enable the MAC_MERGE layer transmit block" "Disabled,Enabled"
bitfld.long 0x00 0. "MM_RX_ENA,Enable the MAC_MERGE layer receive block" "Disabled,Enabled"
line.long 0x04 "VERIF_CONFIG,Configuration To Control The Preemption Verification-Response Of Port"
hexmask.long.byte 0x04 4.--11. 1. "PRM_VERIFY_TIME,Wait time between verification attempts"
bitfld.long 0x04 0. "PRM_VERIFY_DIS,Disable the verification of preemption capabilities of link partner" "No,Yes"
tree.end
base ad:0x1FC000000+0x140000+0x50
tree "ES_DEV_GMII_MM_STATISTICS Registers"
group.long 0x00++0x03
line.long 0x00 "MM_STATUS,Status of MAC Merge Layer Of This Port"
rbitfld.long 0x00 28. "MM_TX_PRMPT_STATUS,P-Frame is being preempted from this MM TX MAC" "Not preempted,Preempted"
rbitfld.long 0x00 24. "MM_TX_FRAME_STATUS,Last transmitted frame by MM was from P-MAC or E-MAC" "E-MAC,P-MAC"
rbitfld.long 0x00 20. "MM_RX_FRAME_STATUS,Last received frame by MM was delivered to P-MAC" "0,1"
newline
eventfld.long 0x00 16. "UNEXP_TX_PFRM_STICKY,P-Fragmented request to be transmitted sticky bit" "Not cleared,Cleared"
eventfld.long 0x00 12. "UNEXP_RX_PFRM_STICKY,Unexpected P-Frame receive sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 8.--10. "PRMPT_VERIFY_STATE,Status of MAC merge sub-layer" "Initial,Verifying,Successful,Failed,Disabled,?..."
newline
eventfld.long 0x00 4. "PRMPT_ACTIVE_STICKY,Change in preemption state sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 0. "PRMPT_ACTIVE_STATUS,Preemption is currently active on this port" "Not active,Active"
tree.end
tree.end
tree "DEV_GMII[5]"
base ad:0x1FC000000+0x150000
tree "ES_DEV_GMII_PORT_MODE Registers"
group.long 0x00++0x07
line.long 0x00 "CLOCK_CFG,Link Speed Configuration And Reset"
bitfld.long 0x00 5. "MAC_TX_RST,Reset Tx direction in MAC" "No reset,Reset"
bitfld.long 0x00 4. "MAC_RX_RST,Reset Rx direction in MAC" "No reset,Reset"
bitfld.long 0x00 3. "PORT_RST,Reset port module" "No reset,Reset"
bitfld.long 0x00 0.--1. "LINK_SPEED,Selects the link speed" "No link,1000/2500Mbps,100Mbps,10Mbps"
line.long 0x04 "PORT_MISC,Loop Configuration And Error Frame Handling"
bitfld.long 0x04 3. "FWD_PAUSE_ENA,Forward pause frames enable" "Disabled,Enabled"
bitfld.long 0x04 2. "FWD_CTRL_ENA,Forward MAC control frames enable" "Disabled,Enabled"
bitfld.long 0x04 1. "GMII_LOOP_ENA,Loop GMII transmit directly enable" "Disabled,Enabled"
bitfld.long 0x04 0. "DEV_LOOP_ENA,Loop the device bus enable" "Disabled,Enabled"
group.long 0x0C++0x0B
line.long 0x00 "EEE_CFG,Control Energy Efficient Ethernet Operation"
bitfld.long 0x00 22. "EEE_ENA,Enable EEE operation on the port" "Disabled,Enabled"
hexmask.long.word 0x00 15.--21. 1. "EEE_TIMER_AGE,Maximum time frames in any queue must wait before the port is activated"
hexmask.long.byte 0x00 8.--14. 1. "EEE_TIMER_WAKEUP,Time from the egress port is activated until frame transmission is restarted"
hexmask.long.byte 0x00 1.--7. 1. "EEE_TIMER_HOLDOFF,Timer passed value"
newline
bitfld.long 0x00 0. "PORT_LPI,Port is in low-power-idle" "No,Yes"
line.long 0x04 "RX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x04 0.--23. 1. "RX_PATH_DELAY,Delay through the local system receive patch"
line.long 0x08 "TX_PATH_DELAY,Local Path Delay compensation Per Front Port"
hexmask.long.tbyte 0x08 0.--23. 1. "TX_PATH_DELAY,Delay through the local system receive patch"
tree.end
base ad:0x1FC000000+0x150000+0x1C
tree "ES_DEV_GMII_MAC_CFG_STATUS Registers"
group.long 0x00++0x1B
line.long 0x00 "MAC_ENA_CFG,Enable Configuration"
bitfld.long 0x00 4. "RX_ENA,Receiver module enable" "Disabled,Enabled"
bitfld.long 0x00 0. "TX_ENA,Transmitter module enable" "Disabled,Enabled"
line.long 0x04 "MAC_MODE_CFG,Mode Configuration"
bitfld.long 0x04 0. "FDX_ENA,Enable full-duplex" "Disabled,Enabled"
line.long 0x08 "MAC_MAXLEN_CFG,Max Length Configuration"
hexmask.long.word 0x08 0.--15. 1. "MAX_LEN,Maximum frame length in bytes accepted by the MAC"
line.long 0x0C "MAC_TAGS_CFG,VLAN/Service Tag Configuration"
hexmask.long.word 0x0C 16.--31. 1. "TAG_ID,EtherTypes recognized as a VLAN TPID"
bitfld.long 0x0C 2. "VLAN_LEN_AWR_ENA,Enable allow single tagged frames to by 4 bytes longer than MAC_MAXLEN_CFG" "Disabled,Enabled"
bitfld.long 0x0C 1. "VLAN_DBL_AWR_ENA,Enable double tagged frames" "Disabled,Enabled"
newline
bitfld.long 0x0C 0. "VLAN_AWR_ENA,Enable single tagged frames" "Disabled,Enabled"
line.long 0x10 "MAC_ADV_CHK_CFG,Advanced Check Feature Configuration"
bitfld.long 0x10 0. "LEN_DROP_ENA,Length drop enable" "Disabled,Enabled"
line.long 0x14 "MAC_IFG_CFG,Inter Frame Gap Configuration Register"
bitfld.long 0x14 8.--12. "TX_IFG,Inter-frame gap in the Tx direction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 4.--7. "RX_IFG2,Duration of the second part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x14 0.--3. "RX_IFG1,Duration of the first part of the inter-frame gap" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "MAC_HDX_CFG,Half-Duplex Configuration"
bitfld.long 0x18 24. "WEXC_DIS,Disable back off" "No,Yes"
hexmask.long.byte 0x18 16.--23. 1. "SEED,Seed value"
bitfld.long 0x18 12. "SEED_LOAD,Load SEED value into PRNG register" "Not loaded,Loaded"
newline
bitfld.long 0x18 8. "RETRY_AFTER_EXC_COL_ENA,MAC retransmit a frame after early collision enable" "Disabled,Enabled"
hexmask.long.byte 0x18 0.--6. 1. "LATE_COL_POS,Adjustment of early/late collision boundary"
group.long 0x20++0x0B
line.long 0x00 "MAC_FC_MAC_LOW_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x00 0.--23. 1. "MAC_LOW,Lower three bytes in the SMAC"
line.long 0x04 "MAC_FC_MAC_HIGH_CFG,MAC Flow Control Configuration"
hexmask.long.tbyte 0x04 0.--23. 1. "MAC_HIGH,Higher three bytes in the SMAC"
line.long 0x08 "MAC_STICKY,Sticky Bit"
eventfld.long 0x08 9. "RX_IPG_SHRINK_STICKY,Inter packet gap sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 8. "RX_PREAM_SHRINK_STICKY,Preamble shrink detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 7. "RX_CARRIER_EXT_STICKY,Carrier extend detected sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 6. "RX_CARRIER_EXT_ERR_STICKY,Carrier extend error detected sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 5. "RX_JUNK_STICKY,Junk receive sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 4. "TX_RETRANSMIT_STICKY,Transmit MAC asked the host for a frame retransmission sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 3. "TX_JAM_STICKY,Transmit host issued a jamming signal sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 2. "TX_FIFO_OFLW_STICKY,MAC transmit FIFO overrun sticky bit" "Not cleared,Cleared"
eventfld.long 0x08 1. "TX_FRM_LEN_OVR_STICKY,Transmit frame length overrun sticky bit" "Not cleared,Cleared"
newline
eventfld.long 0x08 0. "TX_ABORT_STICKY,Transmit host initiated abort sticky bit" "Not cleared,Cleared"
tree.end
base ad:0x1FC000000+0x150000+0x48
tree "ES_DEV_GMII_MM_CONFIG Registers"
group.long 0x00++0x07
line.long 0x00 "ENABLE_CONFIG,Enables The MAC Merge Layer For This Port"
bitfld.long 0x00 8. "KEEP_S_AFTER_D,MM receiver waiting for SMD-C will be processed or discarded" "Discarded,Processed"
bitfld.long 0x00 4. "MM_TX_ENA,Enable the MAC_MERGE layer transmit block" "Disabled,Enabled"
bitfld.long 0x00 0. "MM_RX_ENA,Enable the MAC_MERGE layer receive block" "Disabled,Enabled"
line.long 0x04 "VERIF_CONFIG,Configuration To Control The Preemption Verification-Response Of Port"
hexmask.long.byte 0x04 4.--11. 1. "PRM_VERIFY_TIME,Wait time between verification attempts"
bitfld.long 0x04 0. "PRM_VERIFY_DIS,Disable the verification of preemption capabilities of link partner" "No,Yes"
tree.end
base ad:0x1FC000000+0x150000+0x50
tree "ES_DEV_GMII_MM_STATISTICS Registers"
group.long 0x00++0x03
line.long 0x00 "MM_STATUS,Status of MAC Merge Layer Of This Port"
rbitfld.long 0x00 28. "MM_TX_PRMPT_STATUS,P-Frame is being preempted from this MM TX MAC" "Not preempted,Preempted"
rbitfld.long 0x00 24. "MM_TX_FRAME_STATUS,Last transmitted frame by MM was from P-MAC or E-MAC" "E-MAC,P-MAC"
rbitfld.long 0x00 20. "MM_RX_FRAME_STATUS,Last received frame by MM was delivered to P-MAC" "0,1"
newline
eventfld.long 0x00 16. "UNEXP_TX_PFRM_STICKY,P-Fragmented request to be transmitted sticky bit" "Not cleared,Cleared"
eventfld.long 0x00 12. "UNEXP_RX_PFRM_STICKY,Unexpected P-Frame receive sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 8.--10. "PRMPT_VERIFY_STATE,Status of MAC merge sub-layer" "Initial,Verifying,Successful,Failed,Disabled,?..."
newline
eventfld.long 0x00 4. "PRMPT_ACTIVE_STICKY,Change in preemption state sticky bit" "Not cleared,Cleared"
rbitfld.long 0x00 0. "PRMPT_ACTIVE_STATUS,Preemption is currently active on this port" "Not active,Active"
tree.end
tree.end
tree.end
tree "DEVCPU_GCB"
base ad:0x1FC000000+0x70000
base ad:0x1FC000000+0x70000
tree "ES_DEVCPU_GCB_CHIP_REGS Registers"
group.long 0x00++0x07
line.long 0x00 "GPR,General Purpose"
line.long 0x04 "SOFT_RST,Reset Control"
bitfld.long 0x04 0. "SOFT_SWC_RST,Reset whole switch core" "No reset,Reset"
tree.end
base ad:0x1FC000000+0x70000+0x08
tree "ES_DEVCPU_GCB_GPIO Registers"
group.long (0x30+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OUT0_SET/CLR,GPIO Output 0"
setclrfld.long 0x00 5. -0x18 5. -0x30 5. "G_OUT[5],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 4. -0x18 4. -0x30 4. "[4],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 3. -0x18 3. -0x30 3. "[3],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 2. -0x18 2. -0x30 2. "[2],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 1. -0x18 1. -0x30 1. "[1],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 0. -0x18 0. -0x30 0. "[0],Enable GPIO pin for output" "Disabled,Enabled"
group.long (0x34+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OUT1_SET/CLR,GPIO Output 1"
setclrfld.long 0x00 5. -0x18 5. -0x30 5. "G_OUT[5],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 4. -0x18 4. -0x30 4. "[4],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 3. -0x18 3. -0x30 3. "[3],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 2. -0x18 2. -0x30 2. "[2],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 1. -0x18 1. -0x30 1. "[1],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 0. -0x18 0. -0x30 0. "[0],Enable GPIO pin for output" "Disabled,Enabled"
group.long (0x38+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OUT2_SET/CLR,GPIO Output 2"
setclrfld.long 0x00 5. -0x18 5. -0x30 5. "G_OUT[5],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 4. -0x18 4. -0x30 4. "[4],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 3. -0x18 3. -0x30 3. "[3],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 2. -0x18 2. -0x30 2. "[2],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 1. -0x18 1. -0x30 1. "[1],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 0. -0x18 0. -0x30 0. "[0],Enable GPIO pin for output" "Disabled,Enabled"
group.long (0x3C+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OUT3_SET/CLR,GPIO Output 3"
setclrfld.long 0x00 5. -0x18 5. -0x30 5. "G_OUT[5],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 4. -0x18 4. -0x30 4. "[4],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 3. -0x18 3. -0x30 3. "[3],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 2. -0x18 2. -0x30 2. "[2],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 1. -0x18 1. -0x30 1. "[1],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 0. -0x18 0. -0x30 0. "[0],Enable GPIO pin for output" "Disabled,Enabled"
group.long (0x40+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OUT4_SET/CLR,GPIO Output 4"
setclrfld.long 0x00 5. -0x18 5. -0x30 5. "G_OUT[5],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 4. -0x18 4. -0x30 4. "[4],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 3. -0x18 3. -0x30 3. "[3],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 2. -0x18 2. -0x30 2. "[2],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 1. -0x18 1. -0x30 1. "[1],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 0. -0x18 0. -0x30 0. "[0],Enable GPIO pin for output" "Disabled,Enabled"
group.long (0x44+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OUT5_SET/CLR,GPIO Output 5"
setclrfld.long 0x00 5. -0x18 5. -0x30 5. "G_OUT[5],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 4. -0x18 4. -0x30 4. "[4],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 3. -0x18 3. -0x30 3. "[3],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 2. -0x18 2. -0x30 2. "[2],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 1. -0x18 1. -0x30 1. "[1],Enable GPIO pin for output" "Disabled,Enabled"
setclrfld.long 0x00 0. -0x18 0. -0x30 0. "[0],Enable GPIO pin for output" "Disabled,Enabled"
group.long (0x48+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_IN0,GPIO Input 0"
bitfld.long 0x00 5. "G_IN[5],GPIO input" "Low,High"
bitfld.long 0x00 4. "[4],GPIO input" "Low,High"
bitfld.long 0x00 3. "[3],GPIO input" "Low,High"
bitfld.long 0x00 2. "[2],GPIO input" "Low,High"
bitfld.long 0x00 1. "[1],GPIO input" "Low,High"
bitfld.long 0x00 0. "[0],GPIO input" "Low,High"
group.long (0x4C+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_IN1,GPIO Input 1"
bitfld.long 0x00 5. "G_IN[5],GPIO input" "Low,High"
bitfld.long 0x00 4. "[4],GPIO input" "Low,High"
bitfld.long 0x00 3. "[3],GPIO input" "Low,High"
bitfld.long 0x00 2. "[2],GPIO input" "Low,High"
bitfld.long 0x00 1. "[1],GPIO input" "Low,High"
bitfld.long 0x00 0. "[0],GPIO input" "Low,High"
group.long (0x50+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_IN2,GPIO Input 2"
bitfld.long 0x00 5. "G_IN[5],GPIO input" "Low,High"
bitfld.long 0x00 4. "[4],GPIO input" "Low,High"
bitfld.long 0x00 3. "[3],GPIO input" "Low,High"
bitfld.long 0x00 2. "[2],GPIO input" "Low,High"
bitfld.long 0x00 1. "[1],GPIO input" "Low,High"
bitfld.long 0x00 0. "[0],GPIO input" "Low,High"
group.long (0x54+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_IN3,GPIO Input 3"
bitfld.long 0x00 5. "G_IN[5],GPIO input" "Low,High"
bitfld.long 0x00 4. "[4],GPIO input" "Low,High"
bitfld.long 0x00 3. "[3],GPIO input" "Low,High"
bitfld.long 0x00 2. "[2],GPIO input" "Low,High"
bitfld.long 0x00 1. "[1],GPIO input" "Low,High"
bitfld.long 0x00 0. "[0],GPIO input" "Low,High"
group.long (0x58+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_IN4,GPIO Input 4"
bitfld.long 0x00 5. "G_IN[5],GPIO input" "Low,High"
bitfld.long 0x00 4. "[4],GPIO input" "Low,High"
bitfld.long 0x00 3. "[3],GPIO input" "Low,High"
bitfld.long 0x00 2. "[2],GPIO input" "Low,High"
bitfld.long 0x00 1. "[1],GPIO input" "Low,High"
bitfld.long 0x00 0. "[0],GPIO input" "Low,High"
group.long (0x5C+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_IN5,GPIO Input 5"
bitfld.long 0x00 5. "G_IN[5],GPIO input" "Low,High"
bitfld.long 0x00 4. "[4],GPIO input" "Low,High"
bitfld.long 0x00 3. "[3],GPIO input" "Low,High"
bitfld.long 0x00 2. "[2],GPIO input" "Low,High"
bitfld.long 0x00 1. "[1],GPIO input" "Low,High"
bitfld.long 0x00 0. "[0],GPIO input" "Low,High"
group.long (0x60+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OE0,GPIO Input 0"
bitfld.long 0x00 5. "G_OE[5],GPIO pin direction" "Input,Output"
bitfld.long 0x00 4. "[4],GPIO pin direction" "Input,Output"
bitfld.long 0x00 3. "[3],GPIO pin direction" "Input,Output"
bitfld.long 0x00 2. "[2],GPIO pin direction" "Input,Output"
bitfld.long 0x00 1. "[1],GPIO pin direction" "Input,Output"
bitfld.long 0x00 0. "[0],GPIO pin direction" "Input,Output"
group.long (0x64+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OE1,GPIO Input 1"
bitfld.long 0x00 5. "G_OE[5],GPIO pin direction" "Input,Output"
bitfld.long 0x00 4. "[4],GPIO pin direction" "Input,Output"
bitfld.long 0x00 3. "[3],GPIO pin direction" "Input,Output"
bitfld.long 0x00 2. "[2],GPIO pin direction" "Input,Output"
bitfld.long 0x00 1. "[1],GPIO pin direction" "Input,Output"
bitfld.long 0x00 0. "[0],GPIO pin direction" "Input,Output"
group.long (0x68+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OE2,GPIO Input 2"
bitfld.long 0x00 5. "G_OE[5],GPIO pin direction" "Input,Output"
bitfld.long 0x00 4. "[4],GPIO pin direction" "Input,Output"
bitfld.long 0x00 3. "[3],GPIO pin direction" "Input,Output"
bitfld.long 0x00 2. "[2],GPIO pin direction" "Input,Output"
bitfld.long 0x00 1. "[1],GPIO pin direction" "Input,Output"
bitfld.long 0x00 0. "[0],GPIO pin direction" "Input,Output"
group.long (0x6C+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OE3,GPIO Input 3"
bitfld.long 0x00 5. "G_OE[5],GPIO pin direction" "Input,Output"
bitfld.long 0x00 4. "[4],GPIO pin direction" "Input,Output"
bitfld.long 0x00 3. "[3],GPIO pin direction" "Input,Output"
bitfld.long 0x00 2. "[2],GPIO pin direction" "Input,Output"
bitfld.long 0x00 1. "[1],GPIO pin direction" "Input,Output"
bitfld.long 0x00 0. "[0],GPIO pin direction" "Input,Output"
group.long (0x70+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OE4,GPIO Input 4"
bitfld.long 0x00 5. "G_OE[5],GPIO pin direction" "Input,Output"
bitfld.long 0x00 4. "[4],GPIO pin direction" "Input,Output"
bitfld.long 0x00 3. "[3],GPIO pin direction" "Input,Output"
bitfld.long 0x00 2. "[2],GPIO pin direction" "Input,Output"
bitfld.long 0x00 1. "[1],GPIO pin direction" "Input,Output"
bitfld.long 0x00 0. "[0],GPIO pin direction" "Input,Output"
group.long (0x74+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_OE5,GPIO Input 5"
bitfld.long 0x00 5. "G_OE[5],GPIO pin direction" "Input,Output"
bitfld.long 0x00 4. "[4],GPIO pin direction" "Input,Output"
bitfld.long 0x00 3. "[3],GPIO pin direction" "Input,Output"
bitfld.long 0x00 2. "[2],GPIO pin direction" "Input,Output"
bitfld.long 0x00 1. "[1],GPIO pin direction" "Input,Output"
bitfld.long 0x00 0. "[0],GPIO pin direction" "Input,Output"
group.long (0x78+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR0,GPIO Interrupt 0"
eventfld.long 0x00 5. "G_INTR[5],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 4. "[4],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 3. "[3],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "[2],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 1. "[1],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 0. "[0],GPIO interrupt" "No interrupt,Interrupt"
group.long (0x7C+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR1,GPIO Interrupt 1"
eventfld.long 0x00 5. "G_INTR[5],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 4. "[4],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 3. "[3],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "[2],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 1. "[1],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 0. "[0],GPIO interrupt" "No interrupt,Interrupt"
group.long (0x80+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR2,GPIO Interrupt 2"
eventfld.long 0x00 5. "G_INTR[5],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 4. "[4],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 3. "[3],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "[2],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 1. "[1],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 0. "[0],GPIO interrupt" "No interrupt,Interrupt"
group.long (0x84+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR3,GPIO Interrupt 3"
eventfld.long 0x00 5. "G_INTR[5],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 4. "[4],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 3. "[3],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "[2],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 1. "[1],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 0. "[0],GPIO interrupt" "No interrupt,Interrupt"
group.long (0x88+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR4,GPIO Interrupt 4"
eventfld.long 0x00 5. "G_INTR[5],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 4. "[4],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 3. "[3],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "[2],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 1. "[1],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 0. "[0],GPIO interrupt" "No interrupt,Interrupt"
group.long (0x8C+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR5,GPIO Interrupt 5"
eventfld.long 0x00 5. "G_INTR[5],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 4. "[4],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 3. "[3],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "[2],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 1. "[1],GPIO interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 0. "[0],GPIO interrupt" "No interrupt,Interrupt"
group.long (0x90+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_ENA0,GPIO Interrupt Enable 0"
bitfld.long 0x00 5. "G_INTR_ENA[5],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "[4],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "[3],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "[1],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],GPIO interrupt enable" "Disabled,Enabled"
group.long (0x94+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_ENA1,GPIO Interrupt Enable 1"
bitfld.long 0x00 5. "G_INTR_ENA[5],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "[4],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "[3],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "[1],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],GPIO interrupt enable" "Disabled,Enabled"
group.long (0x98+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_ENA2,GPIO Interrupt Enable 2"
bitfld.long 0x00 5. "G_INTR_ENA[5],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "[4],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "[3],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "[1],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],GPIO interrupt enable" "Disabled,Enabled"
group.long (0x9C+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_ENA3,GPIO Interrupt Enable 3"
bitfld.long 0x00 5. "G_INTR_ENA[5],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "[4],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "[3],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "[1],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],GPIO interrupt enable" "Disabled,Enabled"
group.long (0xA0+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_ENA4,GPIO Interrupt Enable 4"
bitfld.long 0x00 5. "G_INTR_ENA[5],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "[4],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "[3],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "[1],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],GPIO interrupt enable" "Disabled,Enabled"
group.long (0xA4+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_ENA5,GPIO Interrupt Enable 5"
bitfld.long 0x00 5. "G_INTR_ENA[5],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 4. "[4],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "[3],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "[1],GPIO interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],GPIO interrupt enable" "Disabled,Enabled"
group.long (0xA8+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_IDENT0,GPIO Interrupt Identity 0"
bitfld.long 0x00 5. "G_INTR_IDENT[5],GPIO interrupt identity" "0,1"
bitfld.long 0x00 4. "[4],GPIO interrupt identity" "0,1"
bitfld.long 0x00 3. "[3],GPIO interrupt identity" "0,1"
bitfld.long 0x00 2. "[2],GPIO interrupt identity" "0,1"
bitfld.long 0x00 1. "[1],GPIO interrupt identity" "0,1"
bitfld.long 0x00 0. "[0],GPIO interrupt identity" "0,1"
group.long (0xAC+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_IDENT1,GPIO Interrupt Identity 1"
bitfld.long 0x00 5. "G_INTR_IDENT[5],GPIO interrupt identity" "0,1"
bitfld.long 0x00 4. "[4],GPIO interrupt identity" "0,1"
bitfld.long 0x00 3. "[3],GPIO interrupt identity" "0,1"
bitfld.long 0x00 2. "[2],GPIO interrupt identity" "0,1"
bitfld.long 0x00 1. "[1],GPIO interrupt identity" "0,1"
bitfld.long 0x00 0. "[0],GPIO interrupt identity" "0,1"
group.long (0xB0+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_IDENT2,GPIO Interrupt Identity 2"
bitfld.long 0x00 5. "G_INTR_IDENT[5],GPIO interrupt identity" "0,1"
bitfld.long 0x00 4. "[4],GPIO interrupt identity" "0,1"
bitfld.long 0x00 3. "[3],GPIO interrupt identity" "0,1"
bitfld.long 0x00 2. "[2],GPIO interrupt identity" "0,1"
bitfld.long 0x00 1. "[1],GPIO interrupt identity" "0,1"
bitfld.long 0x00 0. "[0],GPIO interrupt identity" "0,1"
group.long (0xB4+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_IDENT3,GPIO Interrupt Identity 3"
bitfld.long 0x00 5. "G_INTR_IDENT[5],GPIO interrupt identity" "0,1"
bitfld.long 0x00 4. "[4],GPIO interrupt identity" "0,1"
bitfld.long 0x00 3. "[3],GPIO interrupt identity" "0,1"
bitfld.long 0x00 2. "[2],GPIO interrupt identity" "0,1"
bitfld.long 0x00 1. "[1],GPIO interrupt identity" "0,1"
bitfld.long 0x00 0. "[0],GPIO interrupt identity" "0,1"
group.long (0xB8+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_IDENT4,GPIO Interrupt Identity 4"
bitfld.long 0x00 5. "G_INTR_IDENT[5],GPIO interrupt identity" "0,1"
bitfld.long 0x00 4. "[4],GPIO interrupt identity" "0,1"
bitfld.long 0x00 3. "[3],GPIO interrupt identity" "0,1"
bitfld.long 0x00 2. "[2],GPIO interrupt identity" "0,1"
bitfld.long 0x00 1. "[1],GPIO interrupt identity" "0,1"
bitfld.long 0x00 0. "[0],GPIO interrupt identity" "0,1"
group.long (0xBC+ad:0x1FC000000+0x70000)++0x03
line.long 0x00 "GPIO_INTR_IDENT5,GPIO Interrupt Identity 5"
bitfld.long 0x00 5. "G_INTR_IDENT[5],GPIO interrupt identity" "0,1"
bitfld.long 0x00 4. "[4],GPIO interrupt identity" "0,1"
bitfld.long 0x00 3. "[3],GPIO interrupt identity" "0,1"
bitfld.long 0x00 2. "[2],GPIO interrupt identity" "0,1"
bitfld.long 0x00 1. "[1],GPIO interrupt identity" "0,1"
bitfld.long 0x00 0. "[0],GPIO interrupt identity" "0,1"
tree.end
base ad:0x1FC000000+0x70000+0xC8
tree "ES_DEVCPU_GCB_MIIM Registers"
rgroup.long 0x00++0x03
line.long 0x00 "MII_STATUS,MIIM Status Register"
bitfld.long 0x00 4. "MIIM_SCAN_COMPLETE,MIIM auto scan complete" "Not completed,Completed"
bitfld.long 0x00 3. "MIIM_STAT_BUSY,MIIM controller current state" "Idle,Busy"
bitfld.long 0x00 2. "MIIM_STAT_OPR_PEND,MIIM controller read/write pending" "Not pending,Pending"
newline
bitfld.long 0x00 1. "MIIM_STAT_PENDING_RD,Read operation via MIIM interface in progress" "Not in progress,In progress"
bitfld.long 0x00 0. "MIIM_STAT_PENDING_WR,Write operation via MIIM interface in progress" "Not in progress,In progress"
group.long 0x08++0x03
line.long 0x00 "MII_CMD,MIIM Command Register"
bitfld.long 0x00 31. "MIIM_CMD_VLD,MIIM command valid" "Write ignored,Write processed"
bitfld.long 0x00 25.--29. "MIIM_CMD_PHYAD,Addressed PHY number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20.--24. "MIIM_CMD_REGAD,Addressed of register within PHY that shall be accessed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
hexmask.long.word 0x00 4.--19. 1. "MIIM_CMD_WRDATA,Data to be written in the PHY register"
bitfld.long 0x00 3. "MIIM_CMD_SINGLE_SCAN,Single scan mode enable" "Disabled,Enabled"
bitfld.long 0x00 1.--2. "MIIM_CMD_OPR_FIELD,Indicates type of operation[C22/C45]" "-/Address,Write/Write,Read/Read inc,-/Read"
newline
bitfld.long 0x00 0. "MIIM_CMD_SCAN,Automatic scanning enable" "Disabled,Enabled"
rgroup.long 0x0C++0x03
line.long 0x00 "MII_DATA,MIIM Reply Data Register"
bitfld.long 0x00 16.--17. "MIIM_DATA_SUCCESS,Read operation failed/succeeded indication" "OK,,,Error"
hexmask.long.word 0x00 0.--15. 1. "MIIM_DATA_RDDATA,Data read from PHY register"
group.long 0x10++0x0B
line.long 0x00 "MII_CFG,MIIM Configuration Register"
bitfld.long 0x00 9.--10. "MIIM_ST_CFG_FIELD,Start of frame field configuration" "Clause 45,Clause 22,?..."
hexmask.long.byte 0x00 0.--7. 1. "MIIM_CFG_PRESCALE,MIIM clock frequency configuration"
line.long 0x04 "MII_SCAN_0,MIIM Scan 0 Register"
bitfld.long 0x04 5.--9. "MIIM_SCAN_PHYADHI,High PHY number to scan during automatic scanning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x04 0.--4. "MIIM_SCAN_PHYADLO,Low PHY number to scan during automatic scanning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x08 "MII_SCAN_1,MIIM Scan 1 Register"
hexmask.long.word 0x08 16.--31. 1. "MIIM_SCAN_MASK,Mask for comparing PHY registers during automatic scan"
hexmask.long.word 0x08 0.--15. 1. "MIIM_SCAN_EXPECT,Expected value for comparing PHY registers during automatic scan"
rgroup.long 0x1C++0x07
line.long 0x00 "MII_SCAN_LAST_RSLTS,MIIM Results Register"
bitfld.long 0x00 31. "MIIM_LAST_RSLT[31],PHY register 31 match expected value" "Mismatched,Matched"
bitfld.long 0x00 30. "[30],PHY register 30 match expected value" "Mismatched,Matched"
bitfld.long 0x00 29. "[29],PHY register 29 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 28. "[28],PHY register 28 match expected value" "Mismatched,Matched"
bitfld.long 0x00 27. "[27],PHY register 27 match expected value" "Mismatched,Matched"
bitfld.long 0x00 26. "[26],PHY register 26 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 25. "[25],PHY register 25 match expected value" "Mismatched,Matched"
bitfld.long 0x00 24. "[24],PHY register 24 match expected value" "Mismatched,Matched"
bitfld.long 0x00 23. "[23],PHY register 23 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 22. "[22],PHY register 22 match expected value" "Mismatched,Matched"
bitfld.long 0x00 21. "[21],PHY register 21 match expected value" "Mismatched,Matched"
bitfld.long 0x00 20. "[20],PHY register 20 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 19. "[19],PHY register 19 match expected value" "Mismatched,Matched"
bitfld.long 0x00 18. "[18],PHY register 18 match expected value" "Mismatched,Matched"
bitfld.long 0x00 17. "[17],PHY register 17 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 16. "[16],PHY register 16 match expected value" "Mismatched,Matched"
bitfld.long 0x00 15. "[15],PHY register 15 match expected value" "Mismatched,Matched"
bitfld.long 0x00 14. "[14],PHY register 14 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 13. "[13],PHY register 13 match expected value" "Mismatched,Matched"
bitfld.long 0x00 12. "[12],PHY register 12 match expected value" "Mismatched,Matched"
bitfld.long 0x00 11. "[11],PHY register 11 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 10. "[10],PHY register 10 match expected value" "Mismatched,Matched"
bitfld.long 0x00 9. "[9],PHY register 9 match expected value" "Mismatched,Matched"
bitfld.long 0x00 8. "[8],PHY register 8 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 7. "[7],PHY register 7 match expected value" "Mismatched,Matched"
bitfld.long 0x00 6. "[6],PHY register 6 match expected value" "Mismatched,Matched"
bitfld.long 0x00 5. "[5],PHY register 5 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 4. "[4],PHY register 4 match expected value" "Mismatched,Matched"
bitfld.long 0x00 3. "[3],PHY register 3 match expected value" "Mismatched,Matched"
bitfld.long 0x00 2. "[2],PHY register 2 match expected value" "Mismatched,Matched"
newline
bitfld.long 0x00 1. "[1],PHY register 1 match expected value" "Mismatched,Matched"
bitfld.long 0x00 0. "[0],PHY register 0 match expected value" "Mismatched,Matched"
line.long 0x04 "MII_SCAN_LAST_RSLTS_VLD,MIIM Results Valid Register"
bitfld.long 0x04 31. "MIIM_LAST_RSLT_VLD[31],PHY register 31 matched valid" "Not valid,Valid"
bitfld.long 0x04 30. "[30],PHY register 30 matched valid" "Not valid,Valid"
bitfld.long 0x04 29. "[29],PHY register 29 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 28. "[28],PHY register 28 matched valid" "Not valid,Valid"
bitfld.long 0x04 27. "[27],PHY register 27 matched valid" "Not valid,Valid"
bitfld.long 0x04 26. "[26],PHY register 26 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 25. "[25],PHY register 25 matched valid" "Not valid,Valid"
bitfld.long 0x04 24. "[24],PHY register 24 matched valid" "Not valid,Valid"
bitfld.long 0x04 23. "[23],PHY register 23 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 22. "[22],PHY register 22 matched valid" "Not valid,Valid"
bitfld.long 0x04 21. "[21],PHY register 21 matched valid" "Not valid,Valid"
bitfld.long 0x04 20. "[20],PHY register 20 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 19. "[19],PHY register 19 matched valid" "Not valid,Valid"
bitfld.long 0x04 18. "[18],PHY register 18 matched valid" "Not valid,Valid"
bitfld.long 0x04 17. "[17],PHY register 17 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 16. "[16],PHY register 16 matched valid" "Not valid,Valid"
bitfld.long 0x04 15. "[15],PHY register 15 matched valid" "Not valid,Valid"
bitfld.long 0x04 14. "[14],PHY register 14 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 13. "[13],PHY register 13 matched valid" "Not valid,Valid"
bitfld.long 0x04 12. "[12],PHY register 12 matched valid" "Not valid,Valid"
bitfld.long 0x04 11. "[11],PHY register 11 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 10. "[10],PHY register 10 matched valid" "Not valid,Valid"
bitfld.long 0x04 9. "[9],PHY register 9 matched valid" "Not valid,Valid"
bitfld.long 0x04 8. "[8],PHY register 8 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 7. "[7],PHY register 7 matched valid" "Not valid,Valid"
bitfld.long 0x04 6. "[6],PHY register 6 matched valid" "Not valid,Valid"
bitfld.long 0x04 5. "[5],PHY register 5 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 4. "[4],PHY register 4 matched valid" "Not valid,Valid"
bitfld.long 0x04 3. "[3],PHY register 3 matched valid" "Not valid,Valid"
bitfld.long 0x04 2. "[2],PHY register 2 matched valid" "Not valid,Valid"
newline
bitfld.long 0x04 1. "[1],PHY register 1 matched valid" "Not valid,Valid"
bitfld.long 0x04 0. "[0],PHY register 0 matched valid" "Not valid,Valid"
tree.end
base ad:0x1FC000000+0x70000+0x110
tree "ES_DEVCPU_GCB_MIIM_READ_SCAN Registers"
rgroup.long 0x00++0x07
line.long 0x00 "ES_MII_SCAN_RSLTS_STICKY0,MIIM Results Sticky Register 0"
bitfld.long 0x00 31. "MIIM_SCAN_RSLTS_STICKY[31],PHY register 31 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 30. "[30],PHY register 30 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 29. "[29],PHY register 29 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 28. "[28],PHY register 28 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x00 27. "[27],PHY register 27 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 26. "[26],PHY register 26 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 25. "[25],PHY register 25 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 24. "[24],PHY register 24 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x00 23. "[23],PHY register 23 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 22. "[22],PHY register 22 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 21. "[21],PHY register 21 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 20. "[20],PHY register 20 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x00 19. "[19],PHY register 19 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 18. "[18],PHY register 18 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 17. "[17],PHY register 17 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 16. "[16],PHY register 16 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x00 15. "[15],PHY register 15 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 14. "[14],PHY register 14 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 13. "[13],PHY register 13 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 12. "[12],PHY register 12 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x00 11. "[11],PHY register 11 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 10. "[10],PHY register 10 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 9. "[9],PHY register 9 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 8. "[8],PHY register 8 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x00 7. "[7],PHY register 7 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 6. "[6],PHY register 6 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 5. "[5],PHY register 5 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 4. "[4],PHY register 4 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x00 3. "[3],PHY register 3 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 2. "[2],PHY register 2 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 1. "[1],PHY register 1 sticky result matched" "Mismatched,Matched"
bitfld.long 0x00 0. "[0],PHY register 0 sticky result matched" "Mismatched,Matched"
line.long 0x04 "ES_MII_SCAN_RSLTS_STICKY1,MIIM Results Sticky Register 1"
bitfld.long 0x04 31. "MIIM_SCAN_RSLTS_STICKY[63],PHY register 63 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 30. "[62],PHY register 62 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 29. "[61],PHY register 61 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 28. "[60],PHY register 60 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x04 27. "[59],PHY register 59 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 26. "[58],PHY register 58 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 25. "[57],PHY register 57 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 24. "[56],PHY register 56 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x04 23. "[55],PHY register 55 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 22. "[54],PHY register 54 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 21. "[53],PHY register 53 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 20. "[52],PHY register 52 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x04 19. "[51],PHY register 51 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 18. "[50],PHY register 50 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 17. "[49],PHY register 49 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 16. "[48],PHY register 48 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x04 15. "[47],PHY register 47 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 14. "[46],PHY register 46 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 13. "[45],PHY register 45 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 12. "[44],PHY register 44 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x04 11. "[43],PHY register 43 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 10. "[42],PHY register 42 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 9. "[41],PHY register 41 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 8. "[40],PHY register 40 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x04 7. "[39],PHY register 39 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 6. "[38],PHY register 38 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 5. "[37],PHY register 37 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 4. "[36],PHY register 36 sticky result matched" "Mismatched,Matched"
newline
bitfld.long 0x04 3. "[35],PHY register 35 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 2. "[34],PHY register 34 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 1. "[33],PHY register 33 sticky result matched" "Mismatched,Matched"
bitfld.long 0x04 0. "[32],PHY register 32 sticky result matched" "Mismatched,Matched"
tree.end
base ad:0x1FC000000+0x70000+0x118
tree "ES_DEVCPU_GCB_MEMITGR Registers"
group.long 0x00++0x03
line.long 0x00 "CTRL,Monitor Control"
bitfld.long 0x00 0. "ACTIVATE,Activate" "0,1"
rgroup.long 0x04++0x0B
line.long 0x00 "STAT,Monitor Status"
bitfld.long 0x00 4. "INDICATION,Indication" "0,1"
bitfld.long 0x00 3. "MODE_LISTEN,Monitor is in LISTEN mode" "No,Yes"
bitfld.long 0x00 2. "MODE_DETECT,Monitor is in DETECT mode" "No,Yes"
bitfld.long 0x00 1. "MODE_IDLE,Monitor is in IDLE mode" "No,Yes"
bitfld.long 0x00 0. "MODE_BUSY,Monitor is in BUSY mode" "No,Yes"
line.long 0x04 "INFO,Memory Indication"
bitfld.long 0x04 31. "MEM_ERR,Monitor detect parity indication" "Not detected,Detected"
bitfld.long 0x04 30. "MEM_COR,Monitor detect correction" "Not detected,Detected"
bitfld.long 0x04 29. "MEM_ERR_OVF,Monitor detect parity indication" "Not detected,Detected"
bitfld.long 0x04 28. "MEM_COR_OVF,Monitor have correction indication" "No,Yes"
hexmask.long 0x04 0.--27. 0x01 "MEM_ADDR,MEM_ADDR"
line.long 0x08 "IDX,Memory Index"
hexmask.long.word 0x08 0.--15. 1. "MEM_IDX,Unique index of memory"
group.long 0x10++0x03
line.long 0x00 "DIV,Monitor Speed"
hexmask.long.word 0x00 0.--15. 1. "MEM_DIV,Configure divider"
tree.end
tree.end
tree "DEVCPU_ORG"
base ad:0x1FC000000
base ad:0x1FC000000+0x00
group.long 0x08++0x0F "ES_DEVCPU_ORG_DEVCPU_ORG"
line.long 0x00 "ORG_CFG,Origin Configuration"
bitfld.long 0x00 0. "FAST_WR,Write accesses return status" "Allowed,Not allowed"
line.long 0x04 "ERR_CNTS,Error counters"
bitfld.long 0x04 16.--19. "ERR_TGT_BUSY,The Target Busy indication" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 12.--15. "ERR_WD_DROP_ORG,The Watch Dog Drop Origin indication" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "ERR_WD_DROP,The Watch Dog Drop indication" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "ERR_NO_ACTION,The No Action indication" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "ERR_UTM,The Unknown Target Module indication" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x08 "TIMEOUT_CFG,Timeout configuration"
hexmask.long.word 0x08 0.--11. 1. "TIMEOUT_CFG,The contents of this field controls the timeout delay for the CSR system"
line.long 0x0C "GPR,General Purpose Register"
tree.end
tree "DEVCPU_PTP"
base ad:0x1FC000000+0x90000
base (ad:0x1FC000000+0x90000)+0xA0
tree "PTP_CFG"
group.long 0x00++0x0F
line.long 0x00 "PTP_MISC_CFG,Misc PTP configurations"
bitfld.long 0x00 2. "PTP_ENA,Enable master counter" "Disabled,Enabled"
bitfld.long 0x00 1. "PTP_HOLD,Hold master counter" "Not held,Held"
bitfld.long 0x00 0. "PTP_TOD_FREEZE,ThePTP_CUR timers will be frozen when this field is set for a domain" "Not frozen,Frozen"
line.long 0x04 "CLK_ADJ_CFG,Generated clock adjustment configuration"
bitfld.long 0x04 1. "CLK_ADJ_DIR,Clock frequency adjustment direction" "Positive adjustment,Negative adjustment"
bitfld.long 0x04 0. "CLK_ADJ_ENA,Clock frequency adjust enable" "Disabled,Enabled"
line.long 0x08 "CLK_ADJ_FRQ,Generated clock frequency adjustment"
bitfld.long 0x08 30. "CLK_ADJ_UNIT,Clock frequency adjust unit" "Picoseconds,Nanoseconds"
hexmask.long 0x08 0.--29. 1. "CLK_ADJ,TClock frequency adjust"
line.long 0x0C "PTP_PIN_INTR,Pending interrupt mask"
eventfld.long 0x0C 4. "INTR_PTP[4],Active edge on pin 4" "No interrupt,Interrupt"
eventfld.long 0x0C 3. "[3],Active edge on pin 3" "No interrupt,Interrupt"
eventfld.long 0x0C 2. "[2],Active edge on pin 2" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 1. "[1],Active edge on pin 1" "No interrupt,Interrupt"
eventfld.long 0x0C 0. "[0],Active edge on pin 0" "No interrupt,Interrupt"
rgroup.long 0x10++0x07
line.long 0x00 "PTP_PIN_INTR_ENA,Enable interrupts per pin"
bitfld.long 0x00 4. "INTR_PTP_ENA[4],Enable interrupt per ptp pin 4" "Disabled,Enabled"
bitfld.long 0x00 3. "[3],Enable interrupt per ptp pin 3" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],Enable interrupt per ptp pin 2" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "[1],Enable interrupt per ptp pin 1" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],Enable interrupt per ptp pin 0" "Disabled,Enabled"
line.long 0x04 "PTP_INTR_IDENT,Current interrupt status"
bitfld.long 0x04 4. "INTR_PTP_IDENT[4],Interrupt is currently pending for pin 4" "No,Yes"
bitfld.long 0x04 3. "[3],Interrupt is currently pending for pin 3" "No,Yes"
bitfld.long 0x04 2. "[2],Interrupt is currently pending for pin 2" "No,Yes"
newline
bitfld.long 0x04 1. "[1],Interrupt is currently pending for pin 1" "No,Yes"
bitfld.long 0x04 0. "[0],Interrupt is currently pending for pin 0" "No,Yes"
group.long 0x18++0x03
line.long 0x00 "PTP_SYS_CLK_CFG,System clock configuration"
bitfld.long 0x00 4.--8. "PTP_SYS_CLK_PER_NS,System clock period (Rounded down to closest interger nanoseconds value)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--3. "PTP_SYS_CLK_PER_PS100,Number of 100ps to add on top of the PTP_SYS_CLK_PER_NS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
base (ad:0x1FC000000+0x90000)+0xBC
tree "PTP_STATUS"
rgroup.long 0x00++0x0F
line.long 0x00 "PTP_CUR_NSF,Current Timestamping Value"
line.long 0x04 "PTP_CUR_NSEC,Current time of day"
hexmask.long 0x04 0.--29. 1. "PTP_CUR_NSEC,Time of day naoseconds(latched when NSF was read)"
line.long 0x08 "PTP_CUR_SEC_LSB,Current time of day"
line.long 0x0C "PTP_CUR_SEC_MSB,Current time of day"
hexmask.long.word 0x0C 0.--15. 1. "PTP_CUR_SEC_MSB,Current time of day - seconds part(latched when NSF was read)"
tree.end
base (ad:0x1FC000000+0x90000)+0x00
tree "PTP_PINS"
group.long 0x00++0x0F
line.long 0x00 "PTP_PIN_CFG,Configuration of use of the register group"
bitfld.long 0x00 3.--5. "PTP_PIN_ACTION,PTP pin action" "IDLE,LOAD,STORE,CLOCK,DELTA,?..."
bitfld.long 0x00 2. "PTP_PIN_SYNC,PTP_PIN_SYNC" "0,1"
bitfld.long 0x00 1. "PTP_PIN_INV_POL,Polarity of the PTP pin" "High,Low"
bitfld.long 0x00 0. "PTP_PIN_DOM,Configures the time domain the pin is connected to" "0,1"
line.long 0x04 "PTP_TOD_SEC_MSB,Time Of Day MSB"
hexmask.long.word 0x04 0.--15. 1. "PTP_TOD_SEC_MSB,Bits 47:32 of the time-of-day seconds"
line.long 0x08 "PTP_TOD_SEC_LSB,Time Of Day LSB"
line.long 0x0C "PTP_TOD_NSEC,Time Of Day nanosecs part"
hexmask.long 0x0C 0.--29. 1. "PTP_TOD_NSEC,Time Of Day nanoseconds loaded or stored into TimeOfDay"
rgroup.long 0x10++0x03
line.long 0x00 "PTP_NSF,Stamper clock"
group.long 0x14++0x07
line.long 0x00 "WF_HIGH_PERIOD,Waveform programming"
hexmask.long 0x00 0.--29. 1. "PIN_WFH,Configure waveform"
line.long 0x04 "WF_LOW_PERIOD,Waveform programming"
hexmask.long 0x04 0.--29. 1. "PIN_WFL,Configure waveform"
tree.end
tree.end
tree "DEVCPU_QS"
base ad:0x1FC000000+0x80000
repeat 2. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "XTR_GRP_CFG$2,Extraction Group Configuration $2 Register"
bitfld.long 0x00 1. "STATUS_WORD_POS,Select order of last data and status words" "Before,After"
bitfld.long 0x00 0. "BYTE_SWAP,Endianess swapping" "Not swapped,Swapped"
repeat.end
repeat 2. (increment 0x08 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "XTR_RD$2,Manual Extraction Data $2 Register"
repeat.end
repeat 2. (increment 0x10 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "XTR_FRM_PRUNING$2,Extraction Frame Pruning $2 Register"
hexmask.long.byte 0x00 0.--7. 1. "PRUNE_SIZE,Extracted frames for the corresponding queue are pruned to 32-bit words"
repeat.end
group.long 0x18++0x03
line.long 0x00 "XTR_FLUSH,Extraction Group Flush Register"
bitfld.long 0x00 1. "FLUSH[1],Enable software flushing of a CPU queue [1]" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],Enable software flushing of a CPU queue [0]" "Disabled,Enabled"
rgroup.long 0x1C++0x03
line.long 0x00 "XTR_DATA_PRESENT,Extraction Status Register"
bitfld.long 0x00 1. "DATA_PRESENT[1],Data available for a CPU queue group [1]" "No frames,At least one frame"
bitfld.long 0x00 0. "[0],Data available for a CPU queue group [0]" "No frames,At least one frame"
base ad:0x1FC000000+0x80000+0x24
repeat 2. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "INJ_GRP_CFG$2,Injection Group Configuration $2 Register"
bitfld.long 0x00 0. "BYTE_SWAP,Endianess swapping" "Not swapped,Swapped"
repeat.end
repeat 2. (increment 0x08 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "INJ_WR$2,Manual Injection Data $2 Register"
repeat.end
repeat 2. (increment 0x10 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "INJ_CTRL$2,Injection Control $2 Register"
bitfld.long 0x00 21.--24. "GAP_SIZE,Controls the min-spacing from EOF to SOF on injected frames" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 20. "ABORT,Set to abort the current frame" "Not set,Set"
bitfld.long 0x00 19. "EOF,Set to indicate that the next data is end-of-frame" "Not set,Set"
bitfld.long 0x00 18. "SOF,Set to indicate that the next data is start-of-frame" "Not set,Set"
newline
bitfld.long 0x00 16.--17. "VLD_BYTES,Set to indicate how many bytes of the next data are valid" "All bytes,1,2,3"
repeat.end
group.long 0x18++0x03
line.long 0x00 "INJ_STATUS,Injection Status Register"
bitfld.long 0x00 5. "WMARK_REACHED[1],Input queue [1] has reached high watermark" "Not reached,Reached"
bitfld.long 0x00 4. "[0],Input queue [0] has reached high watermark" "Not reached,Reached"
bitfld.long 0x00 3. "FIFO_RDY[1],The injector group's FIFO [1] ready for additional data" "Not ready,Ready"
bitfld.long 0x00 2. "[0],The injector group's FIFO [0] ready for additional data" "Not ready,Ready"
newline
bitfld.long 0x00 1. "INJ_IN_PROGRESS[1],Frame injection [1] receiving process" "Not in progress,In progress"
bitfld.long 0x00 0. "[0],Frame injection [0] receiving process" "Not in progress,In progress"
repeat 2. (increment 0x1C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "INJ_ERR$2,Injection Errors $2 Register"
eventfld.long 0x00 1. "ABORT_ERR_STICKY,Set if a frame has been aborted because of double-SOF injection" "No error,Error"
eventfld.long 0x00 0. "WR_ERR_STICKY,Set in case of overflow as a result of not obeying FIFO-ready" "No error,Error"
repeat.end
tree.end
tree "VCAP_CORE"
tree "ES0"
base ad:0x1FC000000+0x40000
base ad:0x1FC000000+0x40000+0x00
tree "VCAP_CORE_CFG"
group.long 0x00++0x07
line.long 0x00 "CFG_VCAP_UPDATE_CTRL,Initiation Of Read/Write/Move/Initialization Operations"
bitfld.long 0x00 22.--24. "UPDATE_CMD,Write and read operations access" "Write cache to VCAP,Read VCAP to cache,Move entry/action up,Move entry/action down,Initialize VCAP,?..."
bitfld.long 0x00 21. "UPDATE_ENTRY_DIS,Disable update of entries for VCAP operations" "No,Yes"
bitfld.long 0x00 20. "UPDATE_ACTION_DIS,Disable update of actions for VCAP operations" "No,Yes"
bitfld.long 0x00 19. "UPDATE_CNT_DIS,disable update of counter for VCAP operations" "No,Yes"
newline
hexmask.long.tbyte 0x00 3.--18. 0x08 "UPDATE_ADDR,The address to access for VCAP operations"
bitfld.long 0x00 2. "UPDATE_SHOT,Initiate the operation specified in UPDATE_CMD" "Not initiated,Initiated"
bitfld.long 0x00 1. "CLEAR_CACHE,Clear the cache" "Not cleared,Cleared"
line.long 0x04 "VCAP_MV_CFG,Configuration For Move/Initialization"
hexmask.long.word 0x04 16.--31. 1. "MV_NUM_POS,Specifies the distance during move operations"
hexmask.long.word 0x04 0.--15. 1. "MV_SIZE,Specifies the number of addresses to move/initialize during move/init operations"
tree.end
base ad:0x1FC000000+0x40000+0x08
tree "VCAP_CORE_CACHE"
repeat 64. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_ENTRY_DAT$2,Entry Data Cache $2"
repeat.end
repeat 64. (increment 0x100 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_MASK_DAT$2,Entry Mask Cache $2"
repeat.end
repeat 64. (increment 0x200 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_ACTION_DAT$2,Action Cache $2"
repeat.end
repeat 32. (increment 0x300 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_CNT_DAT$2,Counter Cache $2"
repeat.end
group.long 0x380++0x03
line.long 0x00 "VCAP_TG_DAT,Entry Type-Group"
tree.end
base ad:0x1FC000000+0x40000+0x38C
tree "VCAP_CORE_MAP"
group.long 0x00++0x03
line.long 0x00 "VCAP_CORE_IDX,Core Index"
bitfld.long 0x00 0.--3. "CORE_IDX,Index of specific core" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x04++0x03
line.long 0x00 "VCAP_CORE_MAP,Mapping Of Core"
bitfld.long 0x00 0.--2. "CORE_MAP,Configure ownership of core n" "0,1,2,3,4,5,6,7"
tree.end
base ad:0x1FC000000+0x40000+0x398
tree "VCAP_CONST"
rgroup.long 0x00++0x27
line.long 0x00 "VCAP_VER,VCAP Version"
line.long 0x04 "ENTRY_WIDTH,Entry Width"
line.long 0x08 "ENTRY_CNT,Number Of Full-Word Entries"
line.long 0x0C "ENTRY_SWCNT,Number Of Subwords Per Full-Word Entry"
line.long 0x10 "ENTRY_TG_WIDTH,Entry Type-Group Width"
line.long 0x14 "ACTION_DEF_CNT,Number Of Defaults"
line.long 0x18 "ACTION_WIDTH,Action Width"
line.long 0x1C "CNT_WIDTH,Counter Width"
line.long 0x20 "CORE_CNT,Number Of Cores"
line.long 0x24 "IF_CNT,Number Of VCAP Interfaces"
tree.end
base ad:0x1FC000000+0x40000+0x3C0
tree "TCAM_BIST"
group.long 0x00++0x03
line.long 0x00 "TCAM_CTRL,Control Of The TCAM"
bitfld.long 0x00 1. "TCAM_BIST,Start manual BIST of the TCAM" "Stopped,Started"
bitfld.long 0x00 0. "TCAM_INIT,Start manual initialization of the TCAM" "Stopped,Started"
rgroup.long 0x08++0x03
line.long 0x00 "TCAM_STAT,Status For The TCAM"
bitfld.long 0x00 2. "BIST_ERR,BIST failed" "No error,Error"
bitfld.long 0x00 1. "BIST_BUSY,BIST is running" "Not busy,Busy"
bitfld.long 0x00 0. "TCAM_RDY,Indicates the current operational state of the TCAM" "Busy,Ready"
tree.end
tree.end
tree "IS1"
base ad:0x1FC000000+0x50000
base ad:0x1FC000000+0x50000+0x00
tree "VCAP_CORE_CFG"
group.long 0x00++0x07
line.long 0x00 "CFG_VCAP_UPDATE_CTRL,Initiation Of Read/Write/Move/Initialization Operations"
bitfld.long 0x00 22.--24. "UPDATE_CMD,Write and read operations access" "Write cache to VCAP,Read VCAP to cache,Move entry/action up,Move entry/action down,Initialize VCAP,?..."
bitfld.long 0x00 21. "UPDATE_ENTRY_DIS,Disable update of entries for VCAP operations" "No,Yes"
bitfld.long 0x00 20. "UPDATE_ACTION_DIS,Disable update of actions for VCAP operations" "No,Yes"
bitfld.long 0x00 19. "UPDATE_CNT_DIS,disable update of counter for VCAP operations" "No,Yes"
newline
hexmask.long.tbyte 0x00 3.--18. 0x08 "UPDATE_ADDR,The address to access for VCAP operations"
bitfld.long 0x00 2. "UPDATE_SHOT,Initiate the operation specified in UPDATE_CMD" "Not initiated,Initiated"
bitfld.long 0x00 1. "CLEAR_CACHE,Clear the cache" "Not cleared,Cleared"
line.long 0x04 "VCAP_MV_CFG,Configuration For Move/Initialization"
hexmask.long.word 0x04 16.--31. 1. "MV_NUM_POS,Specifies the distance during move operations"
hexmask.long.word 0x04 0.--15. 1. "MV_SIZE,Specifies the number of addresses to move/initialize during move/init operations"
tree.end
base ad:0x1FC000000+0x50000+0x08
tree "VCAP_CORE_CACHE"
repeat 64. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_ENTRY_DAT$2,Entry Data Cache $2"
repeat.end
repeat 64. (increment 0x100 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_MASK_DAT$2,Entry Mask Cache $2"
repeat.end
repeat 64. (increment 0x200 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_ACTION_DAT$2,Action Cache $2"
repeat.end
repeat 32. (increment 0x300 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_CNT_DAT$2,Counter Cache $2"
repeat.end
group.long 0x380++0x03
line.long 0x00 "VCAP_TG_DAT,Entry Type-Group"
tree.end
base ad:0x1FC000000+0x50000+0x38C
tree "VCAP_CORE_MAP"
group.long 0x00++0x03
line.long 0x00 "VCAP_CORE_IDX,Core Index"
bitfld.long 0x00 0.--3. "CORE_IDX,Index of specific core" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x04++0x03
line.long 0x00 "VCAP_CORE_MAP,Mapping Of Core"
bitfld.long 0x00 0.--2. "CORE_MAP,Configure ownership of core n" "0,1,2,3,4,5,6,7"
tree.end
base ad:0x1FC000000+0x50000+0x398
tree "VCAP_CONST"
rgroup.long 0x00++0x27
line.long 0x00 "VCAP_VER,VCAP Version"
line.long 0x04 "ENTRY_WIDTH,Entry Width"
line.long 0x08 "ENTRY_CNT,Number Of Full-Word Entries"
line.long 0x0C "ENTRY_SWCNT,Number Of Subwords Per Full-Word Entry"
line.long 0x10 "ENTRY_TG_WIDTH,Entry Type-Group Width"
line.long 0x14 "ACTION_DEF_CNT,Number Of Defaults"
line.long 0x18 "ACTION_WIDTH,Action Width"
line.long 0x1C "CNT_WIDTH,Counter Width"
line.long 0x20 "CORE_CNT,Number Of Cores"
line.long 0x24 "IF_CNT,Number Of VCAP Interfaces"
tree.end
base ad:0x1FC000000+0x50000+0x3C0
tree "TCAM_BIST"
group.long 0x00++0x03
line.long 0x00 "TCAM_CTRL,Control Of The TCAM"
bitfld.long 0x00 1. "TCAM_BIST,Start manual BIST of the TCAM" "Stopped,Started"
bitfld.long 0x00 0. "TCAM_INIT,Start manual initialization of the TCAM" "Stopped,Started"
rgroup.long 0x08++0x03
line.long 0x00 "TCAM_STAT,Status For The TCAM"
bitfld.long 0x00 2. "BIST_ERR,BIST failed" "No error,Error"
bitfld.long 0x00 1. "BIST_BUSY,BIST is running" "Not busy,Busy"
bitfld.long 0x00 0. "TCAM_RDY,Indicates the current operational state of the TCAM" "Busy,Ready"
tree.end
tree.end
tree "IS2"
base ad:0x1FC000000+0x60000
base ad:0x1FC000000+0x60000+0x00
tree "VCAP_CORE_CFG"
group.long 0x00++0x07
line.long 0x00 "CFG_VCAP_UPDATE_CTRL,Initiation Of Read/Write/Move/Initialization Operations"
bitfld.long 0x00 22.--24. "UPDATE_CMD,Write and read operations access" "Write cache to VCAP,Read VCAP to cache,Move entry/action up,Move entry/action down,Initialize VCAP,?..."
bitfld.long 0x00 21. "UPDATE_ENTRY_DIS,Disable update of entries for VCAP operations" "No,Yes"
bitfld.long 0x00 20. "UPDATE_ACTION_DIS,Disable update of actions for VCAP operations" "No,Yes"
bitfld.long 0x00 19. "UPDATE_CNT_DIS,disable update of counter for VCAP operations" "No,Yes"
newline
hexmask.long.tbyte 0x00 3.--18. 0x08 "UPDATE_ADDR,The address to access for VCAP operations"
bitfld.long 0x00 2. "UPDATE_SHOT,Initiate the operation specified in UPDATE_CMD" "Not initiated,Initiated"
bitfld.long 0x00 1. "CLEAR_CACHE,Clear the cache" "Not cleared,Cleared"
line.long 0x04 "VCAP_MV_CFG,Configuration For Move/Initialization"
hexmask.long.word 0x04 16.--31. 1. "MV_NUM_POS,Specifies the distance during move operations"
hexmask.long.word 0x04 0.--15. 1. "MV_SIZE,Specifies the number of addresses to move/initialize during move/init operations"
tree.end
base ad:0x1FC000000+0x60000+0x08
tree "VCAP_CORE_CACHE"
repeat 64. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_ENTRY_DAT$2,Entry Data Cache $2"
repeat.end
repeat 64. (increment 0x100 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_MASK_DAT$2,Entry Mask Cache $2"
repeat.end
repeat 64. (increment 0x200 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_ACTION_DAT$2,Action Cache $2"
repeat.end
repeat 32. (increment 0x300 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "VCAP_CNT_DAT$2,Counter Cache $2"
repeat.end
group.long 0x380++0x03
line.long 0x00 "VCAP_TG_DAT,Entry Type-Group"
tree.end
base ad:0x1FC000000+0x60000+0x38C
tree "VCAP_CORE_MAP"
group.long 0x00++0x03
line.long 0x00 "VCAP_CORE_IDX,Core Index"
bitfld.long 0x00 0.--3. "CORE_IDX,Index of specific core" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x04++0x03
line.long 0x00 "VCAP_CORE_MAP,Mapping Of Core"
bitfld.long 0x00 0.--2. "CORE_MAP,Configure ownership of core n" "0,1,2,3,4,5,6,7"
tree.end
base ad:0x1FC000000+0x60000+0x398
tree "VCAP_CONST"
rgroup.long 0x00++0x27
line.long 0x00 "VCAP_VER,VCAP Version"
line.long 0x04 "ENTRY_WIDTH,Entry Width"
line.long 0x08 "ENTRY_CNT,Number Of Full-Word Entries"
line.long 0x0C "ENTRY_SWCNT,Number Of Subwords Per Full-Word Entry"
line.long 0x10 "ENTRY_TG_WIDTH,Entry Type-Group Width"
line.long 0x14 "ACTION_DEF_CNT,Number Of Defaults"
line.long 0x18 "ACTION_WIDTH,Action Width"
line.long 0x1C "CNT_WIDTH,Counter Width"
line.long 0x20 "CORE_CNT,Number Of Cores"
line.long 0x24 "IF_CNT,Number Of VCAP Interfaces"
tree.end
base ad:0x1FC000000+0x60000+0x3C0
tree "TCAM_BIST"
group.long 0x00++0x03
line.long 0x00 "TCAM_CTRL,Control Of The TCAM"
bitfld.long 0x00 1. "TCAM_BIST,Start manual BIST of the TCAM" "Stopped,Started"
bitfld.long 0x00 0. "TCAM_INIT,Start manual initialization of the TCAM" "Stopped,Started"
rgroup.long 0x08++0x03
line.long 0x00 "TCAM_STAT,Status For The TCAM"
bitfld.long 0x00 2. "BIST_ERR,BIST failed" "No error,Error"
bitfld.long 0x00 1. "BIST_BUSY,BIST is running" "Not busy,Busy"
bitfld.long 0x00 0. "TCAM_RDY,Indicates the current operational state of the TCAM" "Busy,Ready"
tree.end
tree.end
tree.end
tree "QSYS"
base ad:0x1FC000000+0x200000
tree "SYSTEM"
base ad:0x1FC000000+0x200000+0xF460
repeat 8. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "PORT_MODE$2,Port Configuration Per Device Port"
bitfld.long 0x00 1. "DEQUEUE_DIS,Dequeuing from the egress queues disable" "No,Yes"
bitfld.long 0x00 0. "DEQUEUE_LATE,Dequeuing from the egress queues delay" "0,1"
repeat.end
repeat 7. (increment 0x20 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SWITCH_PORT_MODE$2,Various Switch Port Mode Settings Per Switch Port"
bitfld.long 0x00 14. "PORT_ENA,Port enable" "Disabled,Enabled"
bitfld.long 0x00 11.--13. "SCH_NEXT_CFG,Time at which next frame for a port is decided" "EOF cell,One cell,Two cells,Three cells,Four cells,Five cells,Seven cells,All cells"
bitfld.long 0x00 9. "INGRESS_DROP_MODE,Discard frames" "Disabled,Enabled"
hexmask.long.word 0x00 1.--8. 1. "TX_PFC_ENA,Send PRIO pause control frames"
newline
bitfld.long 0x00 0. "TX_PFC_MODE,Congested priority request pause" "Not set,Set"
repeat.end
group.long 0x3C++0x03
line.long 0x00 "STAT_CNT_CFG,Statistics Configuration"
bitfld.long 0x00 5. "TX_GREEN_CNT_MODE,Counter mode for the Tx priority counters for green frames" "Count octets,Count frames"
bitfld.long 0x00 4. "TX_YELLOW_CNT_MODE,Counter mode for the Tx priority counters for yellow frames" "Count octets,Count frames"
bitfld.long 0x00 3. "DROP_GREEN_CNT_MODE,Counter mode for the drop counters for green frames" "Count octets,Count frames"
bitfld.long 0x00 2. "DROP_YELLOW_CNT_MODE,Counter mode for the drop counters for yellow frames" "Count octets,Count frames"
newline
bitfld.long 0x00 0. "DROP_COUNT_EGRESS,Discarded frame counting on the egress/ingress port" "Ingress,Egress"
repeat 6. (increment 0x40 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "EEE_CFG$2,Control Energy Efficient Ethernet Operation Per Front Port $2"
hexmask.long.byte 0x00 0.--7. 1. "EEE_FAST_QUEUES,Queues set in this mask activate the egress port immediately"
repeat.end
group.long 0x58++0x0B
line.long 0x00 "EEE_THRES,Thresholds For Delayed EEE Queues"
hexmask.long.byte 0x00 8.--15. 1. "EEE_HIGH_BYTES,Maximum number of bytes in a queue"
hexmask.long.byte 0x00 0.--7. 1. "EEE_HIGH_FRAMES,Maximum number of frames in a queue"
line.long 0x04 "IGR_NO_SHARING,Control Shared Memory Users"
hexmask.long.byte 0x04 0.--6. 1. "IGR_NO_SHARING,Received frames may use shared resources"
line.long 0x08 "EGR_NO_SHARING,Control Shared Memory Users"
hexmask.long.byte 0x08 0.--6. 1. "EGR_NO_SHARING,Forwarded frames may use shared resources"
repeat 7. (increment 0x64 0x04)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SW_STATUS$2,Various Status Information Per Switch Port $2"
hexmask.long.byte 0x00 0.--7. 1. "EQ_AVAIL,Status bit per egress queue"
repeat.end
group.long 0x80++0x03
line.long 0x00 "EXT_CPU_CFG,External CPU Port Configuration"
bitfld.long 0x00 8.--12. "EXT_CPU_PORT,Select the port to use as the external CPU port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.byte 0x00 0.--7. 1. "EXT_CPUQ_MSK,Frames sent to external CPU"
group.long 0x88++0x03
line.long 0x00 "CPU_GROUP_MAP,Map CPU Extraction Queues To CPU Ports"
bitfld.long 0x00 7. "CPU_GROUP_MAP[7],Map CPU extraction queue 7 to the CPU port" "11,12"
bitfld.long 0x00 6. "[6],Map CPU extraction queue 6 to the CPU port" "11,12"
bitfld.long 0x00 5. "[5],Map CPU extraction queue 5 to the CPU port" "11,12"
bitfld.long 0x00 4. "[4],Map CPU extraction queue 4 to the CPU port" "11,12"
newline
bitfld.long 0x00 3. "[3],Map CPU extraction queue 3 to the CPU port" "11,12"
bitfld.long 0x00 2. "[2],Map CPU extraction queue 2 to the CPU port" "11,12"
bitfld.long 0x00 1. "[1],Map CPU extraction queue 1 to the CPU port" "11,12"
bitfld.long 0x00 0. "[0],Map CPU extraction queue 0 to the CPU port" "11,12"
tree.end
tree "TIMED FRAME CFG"
base ad:0x1FC000000+0x200000+0xF50C
group.long 0x00++0x07
line.long 0x00 "TFRM_MISC,Timed Frame Configuration"
hexmask.long.word 0x00 9.--18. 1. "TIMED_CANCEL_SLOT,Specify slot of timed frame to cancel"
bitfld.long 0x00 8. "TIMED_CANCEL_1SHOT,Cancel a timed transmission" "Not canceled,Canceled"
line.long 0x04 "TFRM_PORT_DLY,Interleaved Transmission Setup"
hexmask.long.byte 0x04 0.--7. 1. "TFRM_PORT_DLY_ENA,Interleave mode enable"
repeat 8. (increment 0x08 0x04)(increment 1 1)
group.long $1++0x03
line.long 0x00 "TFRM_TIMER_CFG_$2,Configures Timers For Timed Transmissions"
repeat.end
tree.end
tree "RES QOS ADV"
base ad:0x1FC000000+0x200000+0xF534
repeat 16. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "RED_PROFILE$2,Weighted Random Early Detection Configuration $2"
hexmask.long.byte 0x00 8.--15. 1. "WM_RED_LOW,Ingress memory consumption by frame's QoS class is under WM_RED_LEVEL"
hexmask.long.byte 0x00 0.--7. 1. "WM_RED_HIGH,Ingress memory consumption by frame's QoS class is above WM_RED_LEVEL"
repeat.end
group.long 0x40++0x03
line.long 0x00 "RES_QOS_MODE,Shared QOS Resource Mode"
hexmask.long.byte 0x00 0.--7. 1. "RES_QOS_RSRVD,QoS class enabled and will have guaranteed shared space"
tree.end
tree "RES CTRL"
base ad:0x1FC000000+0x200000+0xC000
group.long 0x00++0x07
line.long 0x00 "RES_CFG,Watermark Configuration"
bitfld.long 0x00 8. "WM_HIGH[8],Select multiplier unit for watermark" "1,16"
hexmask.long.byte 0x00 0.--7. 1. "WM_HIGH[7:0],Watermark value"
line.long 0x04 "RES_STAT,Resource Status"
hexmask.long.word 0x04 12.--23. 1. "INUSE,Current consumption for corresponding watermark in RES_CFG"
hexmask.long.word 0x04 0.--11. 1. "MAXUSE,Maximum consumption since last read for corresponding watermark in RES_CFG"
tree.end
tree "DROP CFG"
base ad:0x1FC000000+0x200000+0xF578
group.long 0x00++0x03
line.long 0x00 "EGR_DROP_MODE,Egress Ports For Flow Control Configuration Register"
hexmask.long.byte 0x00 0.--6. 1. "EGRESS_DROP_MODE,Discard frames"
tree.end
tree "MMGT"
base ad:0x1FC000000+0x200000+0xF57C
rgroup.long 0x00++0x03
line.long 0x00 "EQ_CTRL,Egress Queue Status"
hexmask.long.word 0x00 0.--15. 1. "FP_FREE_CNT,Number of free frame references"
tree.end
tree "Q MAX SDU"
base ad:0x1FC000000+0x200000+0xF584
repeat 7. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "QMAXSDU_CFG_0$2,MAX SDU For Traffic Class 0 $2"
hexmask.long.word 0x00 0.--15. 1. "QMAXSDU_0,Maximum allowed SDU for the traffic class 0"
repeat.end
repeat 7. (increment 0x1C 0x04)(increment 10. 1.)
group.long $1++0x03
line.long 0x00 "QMAXSDU_CFG_$2,MAX SDU For Traffic Class 1 $2"
hexmask.long.word 0x00 0.--15. 1. "QMAXSDU_1,Maximum allowed SDU for the traffic class 1"
repeat.end
repeat 7. (increment 0x38 0x04)(increment 20. 1.)
group.long $1++0x03
line.long 0x00 "QMAXSDU_CFG_$2,MAX SDU For Traffic Class 2 $2"
hexmask.long.word 0x00 0.--15. 1. "QMAXSDU_2,Maximum allowed SDU for the traffic class 2"
repeat.end
repeat 7. (increment 0x54 0x04)(increment 30. 1.)
group.long $1++0x03
line.long 0x00 "QMAXSDU_CFG_$2,MAX SDU For Traffic Class 3 $2"
hexmask.long.word 0x00 0.--15. 1. "QMAXSDU_3,Maximum allowed SDU for the traffic class 3"
repeat.end
repeat 7. (increment 0x70 0x04)(increment 40. 1.)
group.long $1++0x03
line.long 0x00 "QMAXSDU_CFG_$2,MAX SDU For Traffic Class 4 $2"
hexmask.long.word 0x00 0.--15. 1. "QMAXSDU_4,Maximum allowed SDU for the traffic class 4"
repeat.end
repeat 7. (increment 0x8C 0x04)(increment 50. 1.)
group.long $1++0x03
line.long 0x00 "QMAXSDU_CFG_$2,MAX SDU For Traffic Class 5 $2"
hexmask.long.word 0x00 0.--15. 1. "QMAXSDU_5,Maximum allowed SDU for the traffic class 5"
repeat.end
repeat 7. (increment 0xA8 0x04)(increment 60. 1.)
group.long $1++0x03
line.long 0x00 "QMAXSDU_CFG_$2,MAX SDU For Traffic Class 6 $2"
hexmask.long.word 0x00 0.--15. 1. "QMAXSDU_6,Maximum allowed SDU for the traffic class 6"
repeat.end
repeat 7. (increment 0xC4 0x04)(increment 70. 1.)
group.long $1++0x03
line.long 0x00 "QMAXSDU_CFG_$2,MAX SDU For Traffic Class 7 $2"
hexmask.long.word 0x00 0.--15. 1. "QMAXSDU_7,Maximum allowed SDU for the traffic class 7"
repeat.end
tree.end
tree "PREEMPTION (Preemption Configuration And Status Registers"
base ad:0x1FC000000+0x200000+0xF664
repeat 6. (increment 0x00 0x04)(increment 0 1)
group.long 0x00++0x03
line.long 0x00 "CFG$1,Preemption Configuration Register $1"
hexmask.long.word 0x00 16.--31. 1. "HOLD_ADVANCE,Maximum bytes transmitted between HOLD to the MAC"
bitfld.long 0x00 12.--13. "STRICT_IPG,Controls whether strict bandwidth requirements are to be met" "0,1,2,3"
bitfld.long 0x00 10. "TFRM_PREEMPT_ENA,Timed Frame preempt enable" "Disabled,Enabled"
bitfld.long 0x00 8.--9. "MM_ADD_FRAG_SIZE,Maximum number of bytes over 64 bytes required in non-final fragments" "0,1,2,3"
newline
hexmask.long.byte 0x00 0.--7. 1. "P_QUEUES,A 8-bit vector which specifies preemptable queues within the 8 priorities"
repeat.end
tree.end
tree "HSCH (Configuration Of Scheduling System And Shapers)"
base ad:0x1FC000000+0x200000
group.long 0x00++0x0B
line.long 0x00 "CIR_CFG,Shaping Configuration Of The SE"
hexmask.long.tbyte 0x00 6.--20. 1. "CIR_RATE,Shaper leak rate"
bitfld.long 0x00 0.--5. "CIR_BURST,Shaper burst capacity" "0 kB,4 kB,8 kB,12 kB,16 kB,20 kB,24 kB,28 kB,32 kB,36 kB,40 kB,44 kB,48 kB,52 kB,56 kB,60 kB,64 kB,68 kB,72 kB,76 kB,80 kB,84 kB,88 kB,92 kB,96 kB,100 kB,104 kB,108 kB,112 kB,116 kB,120 kB,124 kB,128 kB,132 kB,136 kB,140 kB,144 kB,148 kB,152 kB,156 kB,160 kB,164 kB,168 kB,172 kB,176 kB,180 kB,184 kB,188 kB,192 kB,196 kB,200 kB,204 kB,208 kB,212 kB,216 kB,220 kB,224 kB,228 kB,232 kB,236 kB,240 kB,244 kB,248 kB,252 kB"
line.long 0x04 "EIR_CFG,Excess Rate Configuration"
hexmask.long.tbyte 0x04 7.--21. 1. "EIR_RATE,Shaper leak rate"
bitfld.long 0x04 1.--6. "EIR_BURST,Shaper burst capacity" "0 kB,4 kB,8 kB,12 kB,16 kB,20 kB,24 kB,28 kB,32 kB,36 kB,40 kB,44 kB,48 kB,52 kB,56 kB,60 kB,64 kB,68 kB,72 kB,76 kB,80 kB,84 kB,88 kB,92 kB,96 kB,100 kB,104 kB,108 kB,112 kB,116 kB,120 kB,124 kB,128 kB,132 kB,136 kB,140 kB,144 kB,148 kB,152 kB,156 kB,160 kB,164 kB,168 kB,172 kB,176 kB,180 kB,184 kB,188 kB,192 kB,196 kB,200 kB,204 kB,208 kB,212 kB,216 kB,220 kB,224 kB,228 kB,232 kB,236 kB,240 kB,244 kB,248 kB,252 kB"
bitfld.long 0x04 0. "EIR_MARK_ENA,Excess rate mark enable" "Disabled,Enabled"
line.long 0x08 "SE_CFG,Configuration Of Shaper And Scheduling Algorithm"
bitfld.long 0x08 6.--8. "SE_DWRR_CNT,Number of input running with DWRR algorithm" "0,1,2,3,4,5,6,7"
bitfld.long 0x08 5. "SE_RR_ENA,Round robin mode enable" "Disabled,Enabled"
bitfld.long 0x08 4. "SE_AVB_ENA,AVB mode enable" "Disabled,Enabled"
bitfld.long 0x08 2.--3. "SE_FRM_MODE,Shaper accounting mode" "Line,Data,Frame 100 fps,Frame 1 fps"
newline
bitfld.long 0x08 1. "SE_EXC_ENA,Exceed level enable" "Disabled,Enabled"
repeat 8. (increment 0x0C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "SE_DWRR_CFG$1,Configuration Of The DWRR Costs Register $1"
bitfld.long 0x00 0.--4. "DWRR_COST,DWRR cost configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
group.long 0x40++0x0B
line.long 0x00 "SE_DLB_SENSE,Configuration Of Which Fill Levels In The Queue System That The DLB Shapers Use To Trigger Excess Information Rate Register"
bitfld.long 0x00 11.--13. "SE_DLB_PRIO,DLB shaper priority" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 7.--10. "SE_DLB_SPORT,DLB source port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 3.--6. "SE_DLB_DPORT,DLB destination port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 2. "SE_DLB_PRIO_ENA,DLB priority enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "SE_DLB_SPORT_ENA,DLB source port enable" "Disabled,Enabled"
bitfld.long 0x00 0. "SE_DLB_DPORT_ENA,DLB destination port enable" "Disabled,Enabled"
line.long 0x04 "CIR_STATE,CIR Status Register"
hexmask.long.tbyte 0x04 4.--25. 0x10 "CIR_LVL,Current fill level"
line.long 0x08 "EIR_STATE,EIR Status Register"
hexmask.long.tbyte 0x08 0.--21. 1. "EIR_LVL,Current fill level"
tree.end
tree "HSCH MISC"
base ad:0x1FC000000+0x200000+0xF67C
group.long 0x00++0x03
line.long 0x00 "CFG,Common Config For HSCH And Policer Module"
bitfld.long 0x00 3.--7. "FRM_ADJ,Values to add each frame when frame length adjustment is in use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
tree.end
tree "QSYS_TAS_CONFIG"
base ad:0x1FC000000+0x200000+0xF680
repeat 6. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "CONFIG_TAG_CONFIG$2,Time Aware Gate Configuration Register $2"
hexmask.long.byte 0x00 16.--23. 1. "SCH_TRAFFIC_QUEUES,A 8-bit vector that determines port queues which will allow scheduled traffic among the 8 queues"
hexmask.long.byte 0x00 8.--15. 1. "INIT_GATE_STATE,Initial state of time aware gate for the port"
bitfld.long 0x00 4.--5. "LINK_SPEED,Specifies the link speed for the port" "2500 Mbps,1000 Mbps,100 Mbps,10 Mbps"
bitfld.long 0x00 0. "ENABLE,Enables time aware shapper's FSMs for the port" "Disabled,Enabled"
repeat.end
group.long 0x18++0x03
line.long 0x00 "CONFIG_TAS_PARAM_CFG_CTRL,TAS Parameters Installer Configuration Register"
bitfld.long 0x00 16. "CONFIG_CHANGE,Admin parameter values for the port ready" "Not ready,Ready"
bitfld.long 0x00 8. "ALWAYS_GUARD_BAND_SCH_Q,Guard band is implemented to any queues" "Non-scheduled,Any"
hexmask.long.byte 0x00 0.--7. 1. "PORT_NUM,Port number"
repeat 6. (increment 0x1C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "CONFIG_PORT_MAX_SDU$2,Port Maximum SDU Configuration Register $2"
hexmask.long.word 0x00 0.--15. 1. "PORT_MAX_SDU,Port maximum length of frame"
repeat.end
tree.end
tree "QSYS_TAS_PARAMS"
base ad:0x1FC000000+0x200000+0xF440
group.long 0x0++0x03
line.long 0x00 "PARAMS_PARAM_CFG_REG_1,TAS Admin Parameter Configuration Register 1"
group.long 0x4++0x03
line.long 0x00 "PARAMS_PARAM_CFG_REG_2,TAS Admin Parameter Configuration Register 2"
group.long 0x8++0x03
line.long 0x00 "PARAMS_PARAM_CFG_REG_3,TAS Admin Parameter Configuration Register 3"
hexmask.long.word 0x00 16.--31. 1. "LIST_LENGTH,Specifies length of the control list"
hexmask.long.word 0x00 0.--15. 1. "BASE_TIME_SEC_MSB,Most significant 16 bits of seconds part of OperBaseTime"
group.long 0xC++0x03
line.long 0x00 "PARAMS_PARAM_CFG_REG_4,TAS Admin Parameter Configuration Register 4"
group.long 0x10++0x03
line.long 0x00 "PARAMS_PARAM_CFG_REG_5,TAS Admin Parameter Configuration Register 5"
group.long 0x14++0x07
line.long 0x00 "PARAMS_GCL_CFG_REG_1,TAS Admin Gate Control List Configuration Register 1"
hexmask.long.byte 0x00 8.--15. 1. "GATE_STATE,A 8 bit vector determing gates state of 8 priorities for the port"
bitfld.long 0x00 0.--5. "GCL_ENTRY_NUM,Specifies address of the gate control entry in the gate control list" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "PARAMS_GCL_CFG_REG_2,TAS Admin Gate Control List Configuration Register 2"
tree.end
tree "QSYS_TAS_STATUS"
base ad:0x1FC000000+0x200000+0xF400
rgroup.long 0x0++0x03
line.long 0x00 "PARAM_STATUS_REG_1,TAS Oper Parameter/Status Register 1"
rgroup.long 0x4++0x03
line.long 0x00 "PARAM_STATUS_REG_2,TAS Oper Parameter/Status Register 2"
rgroup.long 0x8++0x03
line.long 0x00 "PARAM_STATUS_REG_3,TAS Oper Parameter/Status Register 3"
hexmask.long.word 0x00 16.--31. 1. "LIST_LENGTH,Specifies length of the control list"
hexmask.long.word 0x00 0.--15. 1. "BASE_TIME_SEC_MSB,Most significant 16 bits of seconds part of OperBaseTime"
rgroup.long 0xC++0x03
line.long 0x00 "PARAM_STATUS_REG_4,TAS Oper Parameter/Status Register 4"
rgroup.long 0x10++0x03
line.long 0x00 "PARAM_STATUS_REG_5,TAS Oper Parameter/Status Register 5"
rgroup.long 0x14++0x03
line.long 0x00 "PARAM_STATUS_REG_6,TAS Oper Parameter/Status Register 6"
rgroup.long 0x18++0x03
line.long 0x00 "PARAM_STATUS_REG_7,TAS Oper Parameter/Status Register 7"
rgroup.long 0x1C++0x03
line.long 0x00 "PARAM_STATUS_REG_8,TAS Oper Parameter/Status Register 8"
group.long 0x20++0x07
line.long 0x00 "PARAM_STATUS_REG_9,TAS Oper Parameter/Status Register 9"
line.long 0x04 "GCL_STATUS_REG_1,TAS Oper Gate Control List Status Register 1"
hexmask.long.byte 0x04 8.--15. 1. "GATE_STATE,A 8 bit vector determing gates state of 8 priorities for the port"
bitfld.long 0x04 0.--5. "GCL_ENTRY_NUM,Specifies address of the gate control entry in the gate control list" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
rgroup.long 0x28++0x03
line.long 0x00 "GCL_STATUS_REG_2,TAS Oper Gate Control List Status Register 2"
tree.end
tree.end
tree "REW"
base ad:0x1FC000000+0x30000
tree "Port"
group.long 0x00++0x0F
line.long 0x00 "PORT_VLAN_CFG,Port VLAN Configuration"
hexmask.long.word 0x00 16.--31. 1. "PORT_TPID,Tag Protocol Identifier for port"
bitfld.long 0x00 15. "PORT_DEI,DEI value for port" "0,1"
newline
bitfld.long 0x00 12.--14. "PORT_PCP,PCP value for port" "0,1,2,3,4,5,6,7"
hexmask.long.word 0x00 0.--11. 1. "PORT_VID,VID value for port"
line.long 0x04 "TAG_CFG,Tagging Configuration"
bitfld.long 0x04 7.--8. "TAG_CFG,Enable VLAN port tagging" "Disabled,Tag all frames except when VID=0,Tag all frames except when VID=0,Tag all frames"
bitfld.long 0x04 5.--6. "TAG_TPID_CFG,Select TPID EtherType in port tag" "0x8100,0x88A8,Custom value,PORT_TPID value"
newline
bitfld.long 0x04 4. "TAG_VID_CFG,Select VID in port tag" "Classified VID,PORT_VID"
bitfld.long 0x04 2.--3. "TAG_PCP_CFG,Select PCP in port tag" "Classified PCP,PORT_PCP,DP and QoS mapped to PCP,QoS class"
newline
bitfld.long 0x04 0.--1. "TAG_DEI_CFG,Select DEI in port tag" "Classified DEI,PORT_DEI,DP and QoS mapped to DEI,DP level"
line.long 0x08 "PORT_CFG,Special Port Configuration"
bitfld.long 0x08 5. "ES0_ENA,Enable ES0 lookup" "Disabled,Enabled"
bitfld.long 0x08 3.--4. "FCS_UPDATE_NONCPU_CFG,FCS update mode for frames not received on the CPU port" "Update FCS if frame data has changed,Never update,Always update,?..."
newline
bitfld.long 0x08 2. "FCS_UPDATE_CPU_ENA,FCS update CPU enable" "Disabled,Enabled"
bitfld.long 0x08 1. "FLUSH_ENA,FLUSH enable" "Disabled,Enabled"
newline
bitfld.long 0x08 0. "AGE_DIS,AGE disable" "No,Yes"
line.long 0x0C "DSCP_CFG,DSCP Updates"
bitfld.long 0x0C 0.--1. "DSCP_REWR_CFG,Egress DSCP rewrite" "No update/in frame,Update/from analyzer,Update/from analyzer remapped,Update/from analyzer remapped/drop precedence level"
repeat 16. (increment 0x10 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "PCP_DEI_QOS_MAP_CFG$2,Mapping Of DP Level And QoS Class To PCP And DEI Values"
bitfld.long 0x00 3. "DEI_QOS_VAL,Map the frames DP level and QoS class to a DEI value" "0,1"
bitfld.long 0x00 0.--2. "PCP_QOS_VAL,Map the frame's DP level and QoS class to a PCP value" "0,1,2,3,4,5,6,7"
repeat.end
group.long 0x50++0x0B
line.long 0x00 "PTP_CFG,Precision Time Protocol Configuration"
bitfld.long 0x00 7. "PTP_BACKPLANE_MODE,Backplane mode for PTP" "0,1"
bitfld.long 0x00 2. "PTP_1STEP_DIS,Overrules the one-step and the origin PTP commands from IS2" "No,Yes"
newline
bitfld.long 0x00 1. "PTP_2STEP_DIS,Overrules the two-step PTP command from IS2" "No,Yes"
line.long 0x04 "PTP_DLY1_CFG,Asymmetric Delay"
line.long 0x08 "RED_TAG_CFG,Seamless Redundancy Tag Configuration"
bitfld.long 0x08 0. "RED_TAG_CFG,Enable redundancy TAG port tagging" "Disabled,Enabled"
tree.end
tree "Common"
base ad:0x1FC000000+0x30000+0x0410
repeat 64. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "DSCP_REMAP_DP1_CFG,Remap Table Of DSCP Values For Frames With Drop Precedence Set"
hexmask.long.byte 0x00 0.--5. 1. "DSCP_REMAP_DP1_VAL,One to one DSCP remapping table common for all ports"
repeat.end
repeat 64. (increment 0x100 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "DSCP_REMAP_CFG,Remap Table Of DSCP Values"
hexmask.long.byte 0x00 0.--5. 1. "DSCP_REMAP_VAL,One to one DSCP remapping table common for all ports"
repeat.end
group.long 0x204++0x03
line.long 0x00 "REW_STICKY,Sticky Events From Rewriter Block"
eventfld.long 0x00 0. "ES0_TAGB_PUSH_FAILED,TAGB push has failed" "Passed,Failed"
tree.end
tree.end
tree "SYS"
base ad:0x1FC000000+0x10000
base ad:0x1FC000000+0x10000+0xE00
tree "SYSTEM"
group.long 0x00++0x0B
line.long 0x00 "RESET_CFG,Core Reset Control Register"
bitfld.long 0x00 0. "CORE_ENA,Core enable" "Disabled,Enabled"
line.long 0x04 "SR_ETYPE_CFG,Seamless Redundancy EtherType Configuration Register"
hexmask.long.word 0x04 0.--15. 1. "RED_TAG_ETYPE_VAL,Seamless redundancy TAG TPID value"
line.long 0x08 "VLAN_ETYPE_CFG,S-tag Ethernet Type Register"
hexmask.long.word 0x08 0.--15. 1. "VLAN_S_TAG_ETYPE_VAL,Custom Ethernet type for S-tags"
repeat 8. (increment 0x0C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "PORT_MODE$2,Per Device Port Configuration Register $2"
bitfld.long 0x00 5.--6. "DATA_WO_TS,Data WO TS" "0,1,2,3"
bitfld.long 0x00 3.--4. "INCL_INJ_HDR,Formatting mode of incoming frames" "No injection,Injection without prefix,Injection with short prefix,Injection with long prefix"
newline
bitfld.long 0x00 1.--2. "INCL_XTR_HDR,Formating mode of outgoing frames" "No extraction,Extraction without prefix,Extraction with short prefix,Extraction with long prefix"
bitfld.long 0x00 0. "INJ_HDR_ERR,Receiving frame with prefix not complying with the setting in INCL_INJ_HDR enable" "Disabled,Enabled"
repeat.end
repeat 6. (increment 0x2C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "FRONT_PORT_MODE$2,Various Ethernet Port Configurations Per Front Port Register $2"
bitfld.long 0x00 0. "HDX_MODE,Queue system to support the half-duplex mode enable" "Disabled,Enabled"
repeat.end
group.long 0x44++0x07
line.long 0x00 "FRM_AGING,Frame Aging Configuration Register"
bitfld.long 0x00 20. "AGE_TX_ENA,Frames age enable" "Disabled,Enabled"
hexmask.long.tbyte 0x00 0.--19. 1. "MAX_AGE,Max age"
line.long 0x04 "STAT_CFG,Statistics Configuration Register"
bitfld.long 0x04 14. "STAT_CLEAR_SHOT[4],Rx counters clear" "Not cleared,Cleared"
bitfld.long 0x04 13. "[3],Tx counters clear" "Not cleared,Cleared"
bitfld.long 0x04 12. "[2],Drop counters clear" "Not cleared,Cleared"
newline
bitfld.long 0x04 11. "[1],Seamless stream counters clear" "Not cleared,Cleared"
bitfld.long 0x04 10. "[0],Stream filter counters clear" "Not cleared,Cleared"
hexmask.long.word 0x04 0.--9. 1. "STAT_VIEW,Port which counters are readable through the SYS:STAT:CNT register or can be cleared through STAT_CLEAR_SHOT"
repeat 6. (increment 0x6C 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "REW_MAC_HIGH_CFG$2,Mac Address High Configuration Register $2"
hexmask.long.word 0x00 0.--15. 1. "REW_MAC_HIGH,Upper part of MAC address used when replacing source MAC address"
repeat.end
repeat 6. (increment 0x84 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "REW_MAC_LOW_CFG$2,Mac Address Low Configuration Register $2"
repeat.end
group.long 0x9C++0x03
line.long 0x00 "TIMESTAMP_OFFSET,TX Time-Stamp Offset Configuration Register"
hexmask.long.tbyte 0x00 6.--21. 1. "ETH_TYPE_CFG,ETH type field to be matched for placing timestamp at an offset specified by TIMESTAMP_OFFSET field"
hexmask.long.byte 0x00 0.--5. 0x01 "TIMESTAMP_OFFSET,Offset at which Tx timestamp has to be placed"
tree.end
base ad:0x1FC000000+0x10000+0xEA0
tree "PAUSE_CFG"
repeat 7. (increment 0x00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "PAUSE_CFG$2,Watermarks For Flow Control Condition Per Switch Port Register $2"
hexmask.long.word 0x00 10.--18. 1. "PAUSE_START,Pausing ingress stream start"
hexmask.long.word 0x00 1.--9. 1. "PAUSE_STOP,Pausing ingress stream stop"
bitfld.long 0x00 0. "PAUSE_ENA,Pause feedback to the MAC enable" "Disabled,Enabled"
repeat.end
group.long 0x1C++0x03
line.long 0x00 "PAUSE_TOT_CFG,Total Memory Pause Condition Configuration Register"
hexmask.long.word 0x00 9.--17. 1. "PAUSE_TOT_START,TOTPAUSE condition assert"
hexmask.long.word 0x00 0.--8. 1. "PAUSE_TOT_STOP,TOTPAUSE condition deassert"
repeat 7. (increment 0x20 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "ATOP$2,Tail Dropping Level Register $2"
hexmask.long.word 0x00 0.--8. 1. "ATOP,Pocket memory level"
repeat.end
group.long 0x3C++0x03
line.long 0x00 "ATOP_TOT_CFG,Total Raw Memory Use Before Tail Dropping Configuration Register"
hexmask.long.word 0x00 0.--8. 1. "ATOP_TOT,Total raw memory use before tail dropping is activated"
repeat 6. (increment 0x40 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "MAC_FC_CFG$2,MAC Flow Control Configuration Register $2"
bitfld.long 0x00 26.--27. "FC_LINK_SPEED,Link speed" "2500 Mbps,1000 Mbps,100 Mbps,10 Mbps"
bitfld.long 0x00 20.--25. "FC_LATENCY_CFG,Accepted reaction time for link partner after the port has transmitted a pause frame" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 18. "ZERO_PAUSE_ENA,Zero-delay pause frame transmitting when flow control is deasserted enable" "Disabled,Enabled"
newline
bitfld.long 0x00 17. "TX_FC_ENA,MAC sending pause control frames in the Tx direction enable" "Disabled,Enabled"
bitfld.long 0x00 16. "RX_FC_ENA,MAC obeys receiving pause control frames enable" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 1. "PAUSE_VAL_CFG,Pause timer value inserted in generated pause frames"
repeat.end
tree.end
base ad:0x1FC000000+0x10000+0xEF8
tree "MMGT"
rgroup.long 0x00++0x003
line.long 0x00 "MMGT,Packet Memory Status Register"
hexmask.long.word 0x00 0.--15. 1. "FREECNT,Number of 192-byte free memory words"
tree.end
base ad:0x1FC000000+0x10000+0x00
tree "STAT"
group.long 0x00++0x03
line.long 0x00 "STAT_CNT,Counter Values Register"
tree.end
base ad:0x1FC000000+0x10000+0xF14
tree "PTP"
rgroup.long 0x00++0x07
line.long 0x00 "STATUS,Stored Timestamp And Timestamp Queue Status Register"
bitfld.long 0x00 28. "PTP_OVFL,Timestamp queue has overflow" "No overflow,Overflow"
bitfld.long 0x00 27. "PTP_MESS_VLD,Timestamp entry read ready" "Not ready,Ready"
newline
bitfld.long 0x00 21.--26. "PTP_MESS_ID,Timestamp identifier for head-of-line timestamp entry" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--20. "PTP_MESS_TXPORT,The transmit port for the head-of-line timestamp entry" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
hexmask.long.word 0x00 0.--15. 1. "PTP_MESS_SEQ_ID,Timestamp sequence identifier for head-of-line timestamp entry"
line.long 0x04 "TXSTAMP,Timestamp Value Register"
bitfld.long 0x04 31. "PTP_TXSTAMP_SEC,The timestamp value for the head-of-line timestamp entry TOD_SEC value" "0,1"
hexmask.long 0x04 0.--29. 1. "PTP_TXSTAMP,The timestamp value for the head-of-line timestamp entry"
group.long 0x08++0x07
line.long 0x00 "NXT,Advancing The Timestamp Queue Register"
bitfld.long 0x00 0. "PTP_NXT,Advance to the next timestamp entry" "0,1"
line.long 0x04 "CFG,System Configuration Of PTP Register"
bitfld.long 0x04 2.--7. "PTP_STAMP_WID,Timestamp value LS bits size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x04 0.--1. "PTP_CF_ROLL_MODE,Rollover protection done mode" "4 CS LSbits filled out timestamp MSbits,1 CS LSbit filled out timestamp MSbit,CF[62] bit filled out timestamp MSbit,?..."
tree.end
base ad:0x1FC000000+0x10000+0xF24
tree "RAM_CTRL"
group.long 0x00++0x03
line.long 0x00 "RAM_INIT,Core Reset Control Register"
bitfld.long 0x00 1. "RAM_INIT,Core memories initialize" "Not initialized,Initialized"
tree.end
tree.end
tree.end
tree.end
tree "FlexCAN (Flexible Controller Area Network)"
tree "FlexCAN1"
base ad:0x02180000
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
if (((per.l(ad:0x02180000))&0x100000)==0x100000)
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 30. "FRZ,Freeze enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RFEN,Rx FIFO enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "HALT,Halt FlexCAN" "No freeze,Freeze"
rbitfld.long 0x00 27. "NOTRDY,FlexCAN not ready" "Normal/Listen-Only/Loop-Back,Disable/Doze/Stop/Freeze"
bitfld.long 0x00 26. "WAKMSK,Wake up interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "SOFTRST,Soft reset" "No reset,Reset"
rbitfld.long 0x00 24. "FRZACK,Freeze mode acknowledge" "No freeze,Freeze"
bitfld.long 0x00 23. "SUPV,Supervisor mode" "User,Supervisor"
newline
rbitfld.long 0x00 22. "SLFWAK,Self wake up" "Disabled,Enabled"
bitfld.long 0x00 21. "WRNEN,Warning interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 20. "LPMACK,Low-Power mode acknowledge" "No low-power,Low-power"
newline
bitfld.long 0x00 19. "WAKSRC,Wake up source" "Unfiltered Rx,Filtered Rx"
bitfld.long 0x00 17. "SRXDIS,Self reception disable" "No,Yes"
bitfld.long 0x00 16. "IRMQ,Individual Rx masking and queue enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DMA,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 14. "PNET_EN,Pretended networking enable" "Disabled,Enabled"
bitfld.long 0x00 13. "LPRIOEN,Local priority enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "AEN,Abort enable" "Disabled,Enabled"
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "Disabled,Enabled"
bitfld.long 0x00 8.--9. "IDAM,ID acceptance mode" "Format A,Format B,Format C,Format D"
newline
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Number of the last message buffer"
else
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 30. "FRZ,Freeze enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RFEN,Rx FIFO enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "HALT,Halt FlexCAN" "No freeze,Freeze"
rbitfld.long 0x00 27. "NOTRDY,FlexCAN not ready" "Normal/Listen-Only/Loop-Back,Disable/Doze/Stop/Freeze"
bitfld.long 0x00 26. "WAKMSK,Wake up interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "SOFTRST,Soft reset" "No reset,Reset"
rbitfld.long 0x00 24. "FRZACK,Freeze mode acknowledge" "No freeze,Freeze"
bitfld.long 0x00 23. "SUPV,Supervisor mode" "User,Supervisor"
newline
bitfld.long 0x00 22. "SLFWAK,Self wake up" "Disabled,Enabled"
bitfld.long 0x00 21. "WRNEN,Warning interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 20. "LPMACK,Low-Power mode acknowledge" "No low-power,Low-power"
newline
bitfld.long 0x00 19. "WAKSRC,Wake up source" "Unfiltered Rx,Filtered Rx"
bitfld.long 0x00 17. "SRXDIS,Self reception disable" "No,Yes"
bitfld.long 0x00 16. "IRMQ,Individual Rx masking and queue enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DMA,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 14. "PNET_EN,Pretended networking enable" "Disabled,Enabled"
bitfld.long 0x00 13. "LPRIOEN,Local priority enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "AEN,Abort enable" "Disabled,Enabled"
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "Disabled,Enabled"
bitfld.long 0x00 8.--9. "IDAM,ID acceptance mode" "Format A,Format B,Format C,Format D"
newline
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Number of the last message buffer"
endif
else
if (((per.l(ad:0x02180000))&0x100000)==0x100000)
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 30. "FRZ,Freeze enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RFEN,Rx FIFO enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "HALT,Halt FlexCAN" "No freeze,Freeze"
rbitfld.long 0x00 27. "NOTRDY,FlexCAN not ready" "Normal/Listen-Only/Loop-Back,Disable/Doze/Stop/Freeze"
bitfld.long 0x00 26. "WAKMSK,Wake up interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "SOFTRST,Soft reset" "No reset,Reset"
rbitfld.long 0x00 24. "FRZACK,Freeze mode acknowledge" "No freeze,Freeze"
bitfld.long 0x00 23. "SUPV,Supervisor mode" "User,Supervisor"
newline
rbitfld.long 0x00 22. "SLFWAK,Self wake up" "Disabled,Enabled"
bitfld.long 0x00 21. "WRNEN,Warning interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 20. "LPMACK,Low-Power mode acknowledge" "No low-power,Low-power"
newline
bitfld.long 0x00 19. "WAKSRC,Wake up source" "Unfiltered Rx,Filtered Rx"
bitfld.long 0x00 17. "SRXDIS,Self reception disable" "No,Yes"
bitfld.long 0x00 16. "IRMQ,Individual Rx masking and queue enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DMA,DMA enable" "Disabled,Enabled"
rbitfld.long 0x00 14. "PNET_EN,Pretended networking enable" "Disabled,Enabled"
bitfld.long 0x00 13. "LPRIOEN,Local priority enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "AEN,Abort enable" "Disabled,Enabled"
rbitfld.long 0x00 11. "FDEN,CAN FD operation enable" "Disabled,Enabled"
bitfld.long 0x00 8.--9. "IDAM,ID acceptance mode" "Format A,Format B,Format C,Format D"
newline
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Number of the last message buffer"
else
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 30. "FRZ,Freeze enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RFEN,Rx FIFO enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "HALT,Halt FlexCAN" "No freeze,Freeze"
rbitfld.long 0x00 27. "NOTRDY,FlexCAN not ready" "Normal/Listen-Only/Loop-Back,Disable/Doze/Stop/Freeze"
bitfld.long 0x00 26. "WAKMSK,Wake up interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "SOFTRST,Soft reset" "No reset,Reset"
rbitfld.long 0x00 24. "FRZACK,Freeze mode acknowledge" "No freeze,Freeze"
bitfld.long 0x00 23. "SUPV,Supervisor mode" "User,Supervisor"
newline
bitfld.long 0x00 22. "SLFWAK,Self wake up" "Disabled,Enabled"
bitfld.long 0x00 21. "WRNEN,Warning interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 20. "LPMACK,Low-Power mode acknowledge" "No low-power,Low-power"
newline
bitfld.long 0x00 19. "WAKSRC,Wake up source" "Unfiltered Rx,Filtered Rx"
bitfld.long 0x00 17. "SRXDIS,Self reception disable" "No,Yes"
bitfld.long 0x00 16. "IRMQ,Individual Rx masking and queue enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DMA,DMA enable" "Disabled,Enabled"
rbitfld.long 0x00 14. "PNET_EN,Pretended networking enable" "Disabled,Enabled"
bitfld.long 0x00 13. "LPRIOEN,Local priority enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "AEN,Abort enable" "Disabled,Enabled"
rbitfld.long 0x00 11. "FDEN,CAN FD operation enable" "Disabled,Enabled"
bitfld.long 0x00 8.--9. "IDAM,ID acceptance mode" "Format A,Format B,Format C,Format D"
newline
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Number of the last message buffer"
endif
endif
group.long 0x04++0x07
line.long 0x00 "CTRL1,Control 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler division factor"
bitfld.long 0x00 22.--23. "RJW,Resync jump width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" ",1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "CLKSRC,CAN engine clock source" "Oscillator,Peripheral"
bitfld.long 0x00 12. "LPB,Loop back mode" "Disabled,Enabled"
bitfld.long 0x00 11. "TWRNMSK,Tx warning interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "RWRNMSK,Rx warning interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 7. "SMP,CAN bit sampling" "1 sample,3 samples"
bitfld.long 0x00 6. "BOFFREC,Bus off recovery disable" "No,Yes"
newline
bitfld.long 0x00 5. "TSYN,Timer sync" "Disabled,Enabled"
bitfld.long 0x00 4. "LBUF,Lowest buffer transmitted first" "Highest first,Lowest first"
bitfld.long 0x00 3. "LOM,Listen-Only mode" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--2. "PROPSEG,Propagation segment" "0,1,2,3,4,5,6,7"
line.long 0x04 "TIMER,Free Running Timer"
hexmask.long.word 0x04 0.--15. 1. "TIMER,Timer value"
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x10++0x0B
line.long 0x00 "RXMGMASK,Rx Mailboxes Global Mask Register"
bitfld.long 0x00 31. "MG[31],RX mailboxes global mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],RX mailboxes global mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],RX mailboxes global mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],RX mailboxes global mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],RX mailboxes global mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],RX mailboxes global mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],RX mailboxes global mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],RX mailboxes global mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],RX mailboxes global mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],RX mailboxes global mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],RX mailboxes global mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],RX mailboxes global mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],RX mailboxes global mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],RX mailboxes global mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],RX mailboxes global mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],RX mailboxes global mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],RX mailboxes global mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],RX mailboxes global mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],RX mailboxes global mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],RX mailboxes global mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],RX mailboxes global mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],RX mailboxes global mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],RX mailboxes global mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],RX mailboxes global mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],RX mailboxes global mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],RX mailboxes global mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],RX mailboxes global mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],RX mailboxes global mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],RX mailboxes global mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],RX mailboxes global mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],RX mailboxes global mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],RX mailboxes global mask bit 0" "Not masked,Masked"
line.long 0x04 "RX14MASK,Rx Buffer 14 Mask Register"
bitfld.long 0x04 31. "RX14M[31],RX buffer 14 mask bit 31" "Not masked,Masked"
bitfld.long 0x04 30. "[30],RX buffer 14 mask bit 30" "Not masked,Masked"
bitfld.long 0x04 29. "[29],RX buffer 14 mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x04 28. "[28],RX buffer 14 mask bit 28" "Not masked,Masked"
bitfld.long 0x04 27. "[27],RX buffer 14 mask bit 27" "Not masked,Masked"
bitfld.long 0x04 26. "[26],RX buffer 14 mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x04 25. "[25],RX buffer 14 mask bit 25" "Not masked,Masked"
bitfld.long 0x04 24. "[24],RX buffer 14 mask bit 24" "Not masked,Masked"
bitfld.long 0x04 23. "[23],RX buffer 14 mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x04 22. "[22],RX buffer 14 mask bit 22" "Not masked,Masked"
bitfld.long 0x04 21. "[21],RX buffer 14 mask bit 21" "Not masked,Masked"
bitfld.long 0x04 20. "[20],RX buffer 14 mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x04 19. "[19],RX buffer 14 mask bit 19" "Not masked,Masked"
bitfld.long 0x04 18. "[18],RX buffer 14 mask bit 18" "Not masked,Masked"
bitfld.long 0x04 17. "[17],RX buffer 14 mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x04 16. "[16],RX buffer 14 mask bit 16" "Not masked,Masked"
bitfld.long 0x04 15. "[15],RX buffer 14 mask bit 15" "Not masked,Masked"
bitfld.long 0x04 14. "[14],RX buffer 14 mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x04 13. "[13],RX buffer 14 mask bit 13" "Not masked,Masked"
bitfld.long 0x04 12. "[12],RX buffer 14 mask bit 12" "Not masked,Masked"
bitfld.long 0x04 11. "[11],RX buffer 14 mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x04 10. "[10],RX buffer 14 mask bit 10" "Not masked,Masked"
bitfld.long 0x04 9. "[9],RX buffer 14 mask bit 9" "Not masked,Masked"
bitfld.long 0x04 8. "[8],RX buffer 14 mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x04 7. "[7],RX buffer 14 mask bit 7" "Not masked,Masked"
bitfld.long 0x04 6. "[6],RX buffer 14 mask bit 6" "Not masked,Masked"
bitfld.long 0x04 5. "[5],RX buffer 14 mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x04 4. "[4],RX buffer 14 mask bit 4" "Not masked,Masked"
bitfld.long 0x04 3. "[3],RX buffer 14 mask bit 3" "Not masked,Masked"
bitfld.long 0x04 2. "[2],RX buffer 14 mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x04 1. "[1],RX buffer 14 mask bit 1" "Not masked,Masked"
bitfld.long 0x04 0. "[0],RX buffer 14 mask bit 0" "Not masked,Masked"
line.long 0x08 "RX15MASK,Rx Buffer 15 Mask Register"
bitfld.long 0x08 31. "RX15M[31],RX buffer 15 mask bit 31" "Not masked,Masked"
bitfld.long 0x08 30. "[30],RX buffer 15 mask bit 30" "Not masked,Masked"
bitfld.long 0x08 29. "[30],RX buffer 15 mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x08 28. "[28],RX buffer 15 mask bit 28" "Not masked,Masked"
bitfld.long 0x08 27. "[27],RX buffer 15 mask bit 27" "Not masked,Masked"
bitfld.long 0x08 26. "[26],RX buffer 15 mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x08 25. "[25],RX buffer 15 mask bit 25" "Not masked,Masked"
bitfld.long 0x08 24. "[24],RX buffer 15 mask bit 24" "Not masked,Masked"
bitfld.long 0x08 23. "[23],RX buffer 15 mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x08 22. "[22],RX buffer 15 mask bit 22" "Not masked,Masked"
bitfld.long 0x08 21. "[21],RX buffer 15 mask bit 21" "Not masked,Masked"
bitfld.long 0x08 20. "[20],RX buffer 15 mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x08 19. "[19],RX buffer 15 mask bit 19" "Not masked,Masked"
bitfld.long 0x08 18. "[18],RX buffer 15 mask bit 18" "Not masked,Masked"
bitfld.long 0x08 17. "[17],RX buffer 15 mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x08 16. "[16],RX buffer 15 mask bit 16" "Not masked,Masked"
bitfld.long 0x08 15. "[15],RX buffer 15 mask bit 15" "Not masked,Masked"
bitfld.long 0x08 14. "[14],RX buffer 15 mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x08 13. "[13],RX buffer 15 mask bit 13" "Not masked,Masked"
bitfld.long 0x08 12. "[12],RX buffer 15 mask bit 12" "Not masked,Masked"
bitfld.long 0x08 11. "[11],RX buffer 15 mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x08 10. "[10],RX buffer 15 mask bit 10" "Not masked,Masked"
bitfld.long 0x08 9. "[9],RX buffer 15 mask bit 9" "Not masked,Masked"
bitfld.long 0x08 8. "[8],RX buffer 15 mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x08 7. "[7],RX buffer 15 mask bit 7" "Not masked,Masked"
bitfld.long 0x08 6. "[6],RX buffer 15 mask bit 6" "Not masked,Masked"
bitfld.long 0x08 5. "[5],RX buffer 15 mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x08 4. "[4],RX buffer 15 mask bit 4" "Not masked,Masked"
bitfld.long 0x08 3. "[3],RX buffer 15 mask bit 3" "Not masked,Masked"
bitfld.long 0x08 2. "[2],RX buffer 15 mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x08 1. "[1],RX buffer 15 mask bit 1" "Not masked,Masked"
bitfld.long 0x08 0. "[0],RX buffer 15 mask bit 0" "Not masked,Masked"
else
rgroup.long 0x10++0x0B
line.long 0x00 "RXMGMASK,Rx Mailboxes Global Mask Register"
bitfld.long 0x00 31. "MG[31],RX mailboxes global mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],RX mailboxes global mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],RX mailboxes global mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],RX mailboxes global mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],RX mailboxes global mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],RX mailboxes global mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],RX mailboxes global mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],RX mailboxes global mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],RX mailboxes global mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],RX mailboxes global mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],RX mailboxes global mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],RX mailboxes global mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],RX mailboxes global mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],RX mailboxes global mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],RX mailboxes global mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],RX mailboxes global mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],RX mailboxes global mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],RX mailboxes global mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],RX mailboxes global mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],RX mailboxes global mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],RX mailboxes global mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],RX mailboxes global mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],RX mailboxes global mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],RX mailboxes global mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],RX mailboxes global mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],RX mailboxes global mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],RX mailboxes global mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],RX mailboxes global mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],RX mailboxes global mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],RX mailboxes global mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],RX mailboxes global mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],RX mailboxes global mask bit 0" "Not masked,Masked"
line.long 0x04 "RX14MASK,Rx Buffer 14 Mask Register"
bitfld.long 0x04 31. "RX14M[31],RX buffer 14 mask bit 31" "Not masked,Masked"
bitfld.long 0x04 30. "[30],RX buffer 14 mask bit 30" "Not masked,Masked"
bitfld.long 0x04 29. "[29],RX buffer 14 mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x04 28. "[28],RX buffer 14 mask bit 28" "Not masked,Masked"
bitfld.long 0x04 27. "[27],RX buffer 14 mask bit 27" "Not masked,Masked"
bitfld.long 0x04 26. "[26],RX buffer 14 mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x04 25. "[25],RX buffer 14 mask bit 25" "Not masked,Masked"
bitfld.long 0x04 24. "[24],RX buffer 14 mask bit 24" "Not masked,Masked"
bitfld.long 0x04 23. "[23],RX buffer 14 mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x04 22. "[22],RX buffer 14 mask bit 22" "Not masked,Masked"
bitfld.long 0x04 21. "[21],RX buffer 14 mask bit 21" "Not masked,Masked"
bitfld.long 0x04 20. "[20],RX buffer 14 mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x04 19. "[19],RX buffer 14 mask bit 19" "Not masked,Masked"
bitfld.long 0x04 18. "[18],RX buffer 14 mask bit 18" "Not masked,Masked"
bitfld.long 0x04 17. "[17],RX buffer 14 mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x04 16. "[16],RX buffer 14 mask bit 16" "Not masked,Masked"
bitfld.long 0x04 15. "[15],RX buffer 14 mask bit 15" "Not masked,Masked"
bitfld.long 0x04 14. "[14],RX buffer 14 mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x04 13. "[13],RX buffer 14 mask bit 13" "Not masked,Masked"
bitfld.long 0x04 12. "[12],RX buffer 14 mask bit 12" "Not masked,Masked"
bitfld.long 0x04 11. "[11],RX buffer 14 mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x04 10. "[10],RX buffer 14 mask bit 10" "Not masked,Masked"
bitfld.long 0x04 9. "[9],RX buffer 14 mask bit 9" "Not masked,Masked"
bitfld.long 0x04 8. "[8],RX buffer 14 mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x04 7. "[7],RX buffer 14 mask bit 7" "Not masked,Masked"
bitfld.long 0x04 6. "[6],RX buffer 14 mask bit 6" "Not masked,Masked"
bitfld.long 0x04 5. "[5],RX buffer 14 mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x04 4. "[4],RX buffer 14 mask bit 4" "Not masked,Masked"
bitfld.long 0x04 3. "[3],RX buffer 14 mask bit 3" "Not masked,Masked"
bitfld.long 0x04 2. "[2],RX buffer 14 mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x04 1. "[1],RX buffer 14 mask bit 1" "Not masked,Masked"
bitfld.long 0x04 0. "[0],RX buffer 14 mask bit 0" "Not masked,Masked"
line.long 0x08 "RX15MASK,Rx Buffer 15 Mask Register"
bitfld.long 0x08 31. "RX15M[31],RX buffer 15 mask bit 31" "Not masked,Masked"
bitfld.long 0x08 30. "[30],RX buffer 15 mask bit 30" "Not masked,Masked"
bitfld.long 0x08 29. "[29],RX buffer 15 mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x08 28. "[28],RX buffer 15 mask bit 28" "Not masked,Masked"
bitfld.long 0x08 27. "[27],RX buffer 15 mask bit 27" "Not masked,Masked"
bitfld.long 0x08 26. "[26],RX buffer 15 mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x08 25. "[25],RX buffer 15 mask bit 25" "Not masked,Masked"
bitfld.long 0x08 24. "[24],RX buffer 15 mask bit 24" "Not masked,Masked"
bitfld.long 0x08 23. "[23],RX buffer 15 mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x08 22. "[22],RX buffer 15 mask bit 22" "Not masked,Masked"
bitfld.long 0x08 21. "[21],RX buffer 15 mask bit 21" "Not masked,Masked"
bitfld.long 0x08 20. "[20],RX buffer 15 mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x08 19. "[19],RX buffer 15 mask bit 19" "Not masked,Masked"
bitfld.long 0x08 18. "[18],RX buffer 15 mask bit 18" "Not masked,Masked"
bitfld.long 0x08 17. "[17],RX buffer 15 mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x08 16. "[16],RX buffer 15 mask bit 16" "Not masked,Masked"
bitfld.long 0x08 15. "[15],RX buffer 15 mask bit 15" "Not masked,Masked"
bitfld.long 0x08 14. "[14],RX buffer 15 mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x08 13. "[13],RX buffer 15 mask bit 13" "Not masked,Masked"
bitfld.long 0x08 12. "[12],RX buffer 15 mask bit 12" "Not masked,Masked"
bitfld.long 0x08 11. "[11],RX buffer 15 mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x08 10. "[10],RX buffer 15 mask bit 10" "Not masked,Masked"
bitfld.long 0x08 9. "[9],RX buffer 15 mask bit 9" "Not masked,Masked"
bitfld.long 0x08 8. "[8],RX buffer 15 mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x08 7. "[7],RX buffer 15 mask bit 7" "Not masked,Masked"
bitfld.long 0x08 6. "[6],RX buffer 15 mask bit 6" "Not masked,Masked"
bitfld.long 0x08 5. "[5],RX buffer 15 mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x08 4. "[4],RX buffer 15 mask bit 4" "Not masked,Masked"
bitfld.long 0x08 3. "[3],RX buffer 15 mask bit 3" "Not masked,Masked"
bitfld.long 0x08 2. "[2],RX buffer 15 mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x08 1. "[1],RX buffer 15 mask bit 1" "Not masked,Masked"
bitfld.long 0x08 0. "[0],RX buffer 15 mask bit 0" "Not masked,Masked"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x1C++0x03
line.long 0x00 "ECR,Error Counter Register"
rhexmask.long.byte 0x00 24.--31. 1. "RXERRCNT_FAST,Receive error counter for fast bits"
rhexmask.long.byte 0x00 16.--23. 1. "TXERRCNT_FAST,Transmit error counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RX_ERR_COUNTER,Receive error counter"
newline
hexmask.long.byte 0x00 0.--7. 1. "TX_ERR_COUNTER,Transmit error counter"
else
rgroup.long 0x1C++0x03
line.long 0x00 "ECR,Error Counter Register"
hexmask.long.byte 0x00 24.--31. 1. "RXERRCNT_FAST,Receive error counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TXERRCNT_FAST,Transmit error counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RX_ERR_COUNTER,Receive error counter"
newline
hexmask.long.byte 0x00 0.--7. 1. "TX_ERR_COUNTER,Transmit error counter"
endif
newline
hgroup.long 0x20++0x03
hide.long 0x00 "ESR1,Error and Status 1 Register"
in
newline
group.long 0x24++0x0B
line.long 0x00 "IMASK2,Interrupt Masks 2 Register"
bitfld.long 0x00 31. "BUF[63]TO32M,Buffer MB63 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 30. "[62],Buffer MB62 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 29. "[61],Buffer MB61 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "[60],Buffer MB60 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 27. "[59],Buffer MB59 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 26. "[58],Buffer MB58 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "[57],Buffer MB57 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 24. "[56],Buffer MB56 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 23. "[55],Buffer MB55 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 22. "[54],Buffer MB54 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 21. "[53],Buffer MB52 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 20. "[51],Buffer MB51 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "[50],Buffer MB50 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 18. "[49],Buffer MB49 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 17. "[48],Buffer MB48 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "[47],Buffer MB47 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 15. "[46],Buffer MB46 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "[45],Buffer MB45 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "[44],Buffer MB44 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 12. "[43],Buffer MB43 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 11. "[42],Buffer MB42 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "[10],Buffer MB10 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 9. "[41],Buffer MB41 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "[40],Buffer MB40 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "[39],Buffer MB39 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 6. "[38],Buffer MB38 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "[37],Buffer MB37 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "[36],Buffer MB36 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "[35],Buffer MB35 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[34],Buffer MB34 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "[33],Buffer MB33 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[32],Buffer MB32 interrupt enable" "Disabled,Enabled"
line.long 0x04 "IMASK1,Interrupt Masks 1 Register"
bitfld.long 0x04 31. "BUF[31]TO0M,Buffer MB31 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 30. "[30],Buffer MB30 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 29. "[29],Buffer MB29 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 28. "[28],Buffer MB28 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 27. "[27],Buffer MB27 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 26. "[26],Buffer MB26 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 25. "[25],Buffer MB25 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 24. "[24],Buffer MB24 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 23. "[23],Buffer MB23 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 22. "[22],Buffer MB22 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 21. "[21],Buffer MB21 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 20. "[20],Buffer MB20 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 19. "[19],Buffer MB19 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 18. "[18],Buffer MB18 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 17. "[17],Buffer MB17 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 16. "[16],Buffer MB16 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 15. "[15],Buffer MB15 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 14. "[14],Buffer MB14 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 13. "[13],Buffer MB13 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 12. "[12],Buffer MB12 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 11. "[11],Buffer MB11 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 10. "[10],Buffer MB10 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 9. "[9],Buffer MB9 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 8. "[8],Buffer MB8 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 7. "[7],Buffer MB7 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 6. "[6],Buffer MB6 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 5. "[5],Buffer MB5 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 4. "[4],Buffer MB4 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 3. "[3],Buffer MB3 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 2. "[2],Buffer MB2 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 1. "[1],Buffer MB1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 0. "[0],Buffer MB0 interrupt enable" "Disabled,Enabled"
line.long 0x08 "IFLAG2,Interrupt Flags 2 Register"
eventfld.long 0x08 31. "BUF[63]TO32I,Buffer MB63 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 30. "[62],Buffer MB62 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 29. "[61],Buffer MB61 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 28. "[60],Buffer MB60 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 27. "[59],Buffer MB59 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 26. "[58],Buffer MB58 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 25. "[57],Buffer MB57 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 24. "[56],Buffer MB56 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 23. "[55],Buffer MB55 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 22. "[54],Buffer MB54 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 21. "[53],Buffer MB53 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 20. "[52],Buffer MB52 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 19. "[51],Buffer MB51 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 18. "[50],Buffer MB50 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 17. "[49],Buffer MB49 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 16. "[48],Buffer MB48 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 15. "[47],Buffer MB47 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 14. "[46],Buffer MB46 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 13. "[45],Buffer MB45 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 12. "[44],Buffer MB44 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 11. "[43],Buffer MB43 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 10. "[42],Buffer MB42 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 9. "[41],Buffer MB41 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 8. "[40],Buffer MB40 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 7. "[39],Buffer MB39 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 6. "[38],Buffer MB38 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 5. "[37],Buffer MB37 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 4. "[36],Buffer MB36 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 3. "[35],Buffer MB35 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 2. "[34],Buffer MB34 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 1. "[33],Buffer MB33 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 0. "[32],Buffer MB32 interrupt" "Not occurred,Occurred"
if (((per.l(ad:0x02180000))&0x20008000)==0x20000000)
group.long 0x30++0x03
line.long 0x00 "IFLAG1,Interrupt Flags 1 Register"
eventfld.long 0x00 31. "BUF[31]TO8I,Buffer MB31 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 30. "[30],Buffer MB30 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 29. "[29],Buffer MB29 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 28. "[28],Buffer MB28 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 27. "[27],Buffer MB27 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 26. "[26],Buffer MB26 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 25. "[25],Buffer MB25 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 24. "[24],Buffer MB24 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 23. "[23],Buffer MB23 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 22. "[22],Buffer MB22 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 21. "[21],Buffer MB21 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 20. "[20],Buffer MB20 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 19. "[19],Buffer MB19 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 18. "[18],Buffer MB18 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 17. "[17],Buffer MB17 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 16. "[16],Buffer MB16 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 15. "[15],Buffer MB15 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 14. "[14],Buffer MB14 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 13. "[13],Buffer MB13 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 12. "[12],Buffer MB12 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 11. "[11],Buffer MB11 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 10. "[10],Buffer MB10 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 9. "[9],Buffer MB9 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 8. "[8],Buffer MB8 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 7. "BUF7I,Buffer MB7 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 6. "BUF6I,Buffer MB6 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 5. "BUF5I,Buffer MB5 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 0. "BUF0I,Buffer MB0 interrupt" "Not occurred,Occurred"
else
group.long 0x30++0x03
line.long 0x00 "IFLAG1,Interrupt Flags 1 Register"
eventfld.long 0x00 31. "BUF[31]TO8I,Buffer MB31 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 30. "[30],Buffer MB30 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 29. "[29],Buffer MB29 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 28. "[28],Buffer MB28 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 27. "[27],Buffer MB27 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 26. "[26],Buffer MB26 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 25. "[25],Buffer MB25 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 24. "[24],Buffer MB24 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 23. "[23],Buffer MB23 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 22. "[22],Buffer MB22 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 21. "[21],Buffer MB21 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 20. "[20],Buffer MB20 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 19. "[19],Buffer MB19 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 18. "[18],Buffer MB18 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 17. "[17],Buffer MB17 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 16. "[16],Buffer MB16 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 15. "[15],Buffer MB15 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 14. "[14],Buffer MB14 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 13. "[13],Buffer MB13 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 12. "[12],Buffer MB12 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 11. "[11],Buffer MB11 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 10. "[10],Buffer MB10 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 9. "[9],Buffer MB9 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 8. "[8],Buffer MB8 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 7. "BUF7I,Buffer MB7 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 6. "BUF6I,Buffer MB6 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 5. "BUF5I,Buffer MB5 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 4. "BUF[4]TO1I,Buffer MB4 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 3. "[3],Buffer MB3 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 2. "[2],Buffer MB2 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 1. "[1],Buffer MB1 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 0. "BUF0I,Buffer MB0 interrupt" "Not occurred,Occurred"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x34++0x03
line.long 0x00 "CTRL2,Control 2 Register"
bitfld.long 0x00 31. "ERRMSK_FAST,Error interrupt mask for errors detected in the data phase of fast CAN FD frames" "Disabled,Enabled"
bitfld.long 0x00 30. "BOFFDONEMSK,Bus off done interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 29. "ECRWRE,Error-correction configuration register write enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "WRMFRZ,Write-access to memory in freeze mode" "Disabled,Enabled"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO filters" "8,16,24,32,40,48,56,64,72,80,88,96,104,112,120,128"
bitfld.long 0x00 19.--23. "TASD,Tx arbitration start delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 18. "MRP,Mailboxes reception priority" "Rx FIFO-mailboxes,Mailboxes-Rx FIFO"
bitfld.long 0x00 17. "RRS,Remote request storing" "Generated,Stored"
bitfld.long 0x00 16. "EACEN,Entire frame arbitration field comparison enable for Rx mailboxes" "IDE on-RTR off,IDE and RTR on"
newline
bitfld.long 0x00 15. "TIMER_SRC,Timer source" "CAN bit clock,External"
else
group.long 0x34++0x03
line.long 0x00 "CTRL2,Control 2 Register"
bitfld.long 0x00 31. "ERRMSK_FAST,Error interrupt mask for errors detected in the data phase of fast CAN FD frames" "Disabled,Enabled"
bitfld.long 0x00 30. "BOFFDONEMSK,Bus off done interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 29. "ECRWRE,Error-correction configuration register write enable" "Disabled,Enabled"
newline
rbitfld.long 0x00 28. "WRMFRZ,Write-access to memory in freeze mode" "Disabled,Enabled"
rbitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO filters" "8,16,24,32,40,48,56,64,72,80,88,96,104,112,120,128"
rbitfld.long 0x00 19.--23. "TASD,Tx arbitration start delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
rbitfld.long 0x00 18. "MRP,Mailboxes reception priority" "Rx FIFO-Mailboxes,Mailboxes-Rx FIFO"
rbitfld.long 0x00 17. "RRS,Remote request storing" "Generated,Stored"
rbitfld.long 0x00 16. "EACEN,Entire frame arbitration field comparison enable for Rx mailboxes" "IDE on-RTR off,IDE and RTR on"
newline
rbitfld.long 0x00 15. "TIMER_SRC,Timer source" "CAN bit clock,External"
endif
if (((per.l((ad:0x02180000)+0x38)&0x4000)==0x4000))
rgroup.long 0x38++0x03
line.long 0x00 "ESR2,Error and Status 2 Register"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest priority tx mailbox"
bitfld.long 0x00 14. "VPS,IMB and LPTM contents valid indicator" "Invalid,Valid"
bitfld.long 0x00 13. "IMB,Indicates whether there is any inactive mailbox" "No inactive mailbox,Inactive mailbox"
else
rgroup.long 0x38++0x03
line.long 0x00 "ESR2,Error and Status 2 Register"
bitfld.long 0x00 14. "VPS,IMB and LPTM contents valid indicator" "Invalid,Valid"
endif
rgroup.long 0x44++0x03
line.long 0x00 "CRCR,CRC Register"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC mailbox"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC value"
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x48++0x03
line.long 0x00 "RXFGMASK,Rx FIFO Global Mask Register"
bitfld.long 0x00 31. "FMG[31],RX mailboxes global mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],RX mailboxes global mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],RX mailboxes global mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],RX mailboxes global mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],RX mailboxes global mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],RX mailboxes global mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],RX mailboxes global mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],RX mailboxes global mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],RX mailboxes global mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],RX mailboxes global mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],RX mailboxes global mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],RX mailboxes global mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],RX mailboxes global mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],RX mailboxes global mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],RX mailboxes global mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],RX mailboxes global mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],RX mailboxes global mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],RX mailboxes global mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],RX mailboxes global mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],RX mailboxes global mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],RX mailboxes global mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],RX mailboxes global mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],RX mailboxes global mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],RX mailboxes global mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],RX mailboxes global mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],RX mailboxes global mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],RX mailboxes global mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],RX mailboxes global mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],RX mailboxes global mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],RX mailboxes global mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],RX mailboxes global mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],RX mailboxes global mask bit 0" "Not masked,Masked"
else
rgroup.long 0x48++0x03
line.long 0x00 "RXFGMASK,Rx FIFO Global Mask Register"
bitfld.long 0x00 31. "FMG[31],RX mailboxes global mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],RX mailboxes global mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],RX mailboxes global mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],RX mailboxes global mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],RX mailboxes global mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],RX mailboxes global mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],RX mailboxes global mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],RX mailboxes global mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],RX mailboxes global mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],RX mailboxes global mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],RX mailboxes global mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],RX mailboxes global mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],RX mailboxes global mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],RX mailboxes global mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],RX mailboxes global mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],RX mailboxes global mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],RX mailboxes global mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],RX mailboxes global mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],RX mailboxes global mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],RX mailboxes global mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],RX mailboxes global mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],RX mailboxes global mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],RX mailboxes global mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],RX mailboxes global mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],RX mailboxes global mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],RX mailboxes global mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],RX mailboxes global mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],RX mailboxes global mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],RX mailboxes global mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],RX mailboxes global mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],RX mailboxes global mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],RX mailboxes global mask bit 0" "Not masked,Masked"
endif
if (((per.l(ad:0x02180000+0x30))&0x20)==0x20)
group.long 0x4C++0x03
line.long 0x00 "RXFIR,Rx FIFO Information Register"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,Identifier acceptance filter hit by the received message that is in the output of the Rx FIFO"
else
hgroup.long 0x4C++0x03
hide.long 0x00 "RXFIR,Rx FIFO Information Register"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x50++0x03
line.long 0x00 "CBT,CAN Bit Timing Register"
bitfld.long 0x00 31. "BTF,Bit timing format enable" "Disabled,Enabled"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended prescaler division factor"
bitfld.long 0x00 16.--19. "ERJW,Extended resync jump width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 10.--15. "EPROPSEG,Extended propagation segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended phase segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "EPSEG2,Extended phase segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
else
rgroup.long 0x50++0x03
line.long 0x00 "CBT,CAN Bit Timing Register"
bitfld.long 0x00 31. "BTF,Bit timing format enable" "Disabled,Enabled"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended prescaler division factor"
bitfld.long 0x00 16.--19. "ERJW,Extended resync jump width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 10.--15. "EPROPSEG,Extended propagation segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended phase segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "EPSEG2,Extended phase segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x880++0x03
line.long 0x00 "RXIMR0,Rx Individual Mask Register 0"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x880++0x03
hide.long 0x00 "RXIMR0,Rx Individual Mask Register 0"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x884++0x03
line.long 0x00 "RXIMR1,Rx Individual Mask Register 1"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x884++0x03
hide.long 0x00 "RXIMR1,Rx Individual Mask Register 1"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x888++0x03
line.long 0x00 "RXIMR2,Rx Individual Mask Register 2"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x888++0x03
hide.long 0x00 "RXIMR2,Rx Individual Mask Register 2"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x88C++0x03
line.long 0x00 "RXIMR3,Rx Individual Mask Register 3"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x88C++0x03
hide.long 0x00 "RXIMR3,Rx Individual Mask Register 3"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x890++0x03
line.long 0x00 "RXIMR4,Rx Individual Mask Register 4"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x890++0x03
hide.long 0x00 "RXIMR4,Rx Individual Mask Register 4"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x894++0x03
line.long 0x00 "RXIMR5,Rx Individual Mask Register 5"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x894++0x03
hide.long 0x00 "RXIMR5,Rx Individual Mask Register 5"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x898++0x03
line.long 0x00 "RXIMR6,Rx Individual Mask Register 6"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x898++0x03
hide.long 0x00 "RXIMR6,Rx Individual Mask Register 6"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x89C++0x03
line.long 0x00 "RXIMR7,Rx Individual Mask Register 7"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x89C++0x03
hide.long 0x00 "RXIMR7,Rx Individual Mask Register 7"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8A0++0x03
line.long 0x00 "RXIMR8,Rx Individual Mask Register 8"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8A0++0x03
hide.long 0x00 "RXIMR8,Rx Individual Mask Register 8"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8A4++0x03
line.long 0x00 "RXIMR9,Rx Individual Mask Register 9"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8A4++0x03
hide.long 0x00 "RXIMR9,Rx Individual Mask Register 9"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8A8++0x03
line.long 0x00 "RXIMR10,Rx Individual Mask Register 10"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8A8++0x03
hide.long 0x00 "RXIMR10,Rx Individual Mask Register 10"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8AC++0x03
line.long 0x00 "RXIMR11,Rx Individual Mask Register 11"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8AC++0x03
hide.long 0x00 "RXIMR11,Rx Individual Mask Register 11"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8B0++0x03
line.long 0x00 "RXIMR12,Rx Individual Mask Register 12"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8B0++0x03
hide.long 0x00 "RXIMR12,Rx Individual Mask Register 12"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8B4++0x03
line.long 0x00 "RXIMR13,Rx Individual Mask Register 13"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8B4++0x03
hide.long 0x00 "RXIMR13,Rx Individual Mask Register 13"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8B8++0x03
line.long 0x00 "RXIMR14,Rx Individual Mask Register 14"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8B8++0x03
hide.long 0x00 "RXIMR14,Rx Individual Mask Register 14"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8BC++0x03
line.long 0x00 "RXIMR15,Rx Individual Mask Register 15"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8BC++0x03
hide.long 0x00 "RXIMR15,Rx Individual Mask Register 15"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8C0++0x03
line.long 0x00 "RXIMR16,Rx Individual Mask Register 16"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8C0++0x03
hide.long 0x00 "RXIMR16,Rx Individual Mask Register 16"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8C4++0x03
line.long 0x00 "RXIMR17,Rx Individual Mask Register 17"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8C4++0x03
hide.long 0x00 "RXIMR17,Rx Individual Mask Register 17"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8C8++0x03
line.long 0x00 "RXIMR18,Rx Individual Mask Register 18"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8C8++0x03
hide.long 0x00 "RXIMR18,Rx Individual Mask Register 18"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8CC++0x03
line.long 0x00 "RXIMR19,Rx Individual Mask Register 19"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8CC++0x03
hide.long 0x00 "RXIMR19,Rx Individual Mask Register 19"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8D0++0x03
line.long 0x00 "RXIMR20,Rx Individual Mask Register 20"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8D0++0x03
hide.long 0x00 "RXIMR20,Rx Individual Mask Register 20"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8D4++0x03
line.long 0x00 "RXIMR21,Rx Individual Mask Register 21"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8D4++0x03
hide.long 0x00 "RXIMR21,Rx Individual Mask Register 21"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8D8++0x03
line.long 0x00 "RXIMR22,Rx Individual Mask Register 22"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8D8++0x03
hide.long 0x00 "RXIMR22,Rx Individual Mask Register 22"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8DC++0x03
line.long 0x00 "RXIMR23,Rx Individual Mask Register 23"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8DC++0x03
hide.long 0x00 "RXIMR23,Rx Individual Mask Register 23"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8E0++0x03
line.long 0x00 "RXIMR24,Rx Individual Mask Register 24"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8E0++0x03
hide.long 0x00 "RXIMR24,Rx Individual Mask Register 24"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8E4++0x03
line.long 0x00 "RXIMR25,Rx Individual Mask Register 25"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8E4++0x03
hide.long 0x00 "RXIMR25,Rx Individual Mask Register 25"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8E8++0x03
line.long 0x00 "RXIMR26,Rx Individual Mask Register 26"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8E8++0x03
hide.long 0x00 "RXIMR26,Rx Individual Mask Register 26"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8EC++0x03
line.long 0x00 "RXIMR27,Rx Individual Mask Register 27"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8EC++0x03
hide.long 0x00 "RXIMR27,Rx Individual Mask Register 27"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8F0++0x03
line.long 0x00 "RXIMR28,Rx Individual Mask Register 28"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8F0++0x03
hide.long 0x00 "RXIMR28,Rx Individual Mask Register 28"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8F4++0x03
line.long 0x00 "RXIMR29,Rx Individual Mask Register 29"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8F4++0x03
hide.long 0x00 "RXIMR29,Rx Individual Mask Register 29"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8F8++0x03
line.long 0x00 "RXIMR30,Rx Individual Mask Register 30"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8F8++0x03
hide.long 0x00 "RXIMR30,Rx Individual Mask Register 30"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x8FC++0x03
line.long 0x00 "RXIMR31,Rx Individual Mask Register 31"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8FC++0x03
hide.long 0x00 "RXIMR31,Rx Individual Mask Register 31"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x900++0x03
line.long 0x00 "RXIMR32,Rx Individual Mask Register 32"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x900++0x03
hide.long 0x00 "RXIMR32,Rx Individual Mask Register 32"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x904++0x03
line.long 0x00 "RXIMR33,Rx Individual Mask Register 33"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x904++0x03
hide.long 0x00 "RXIMR33,Rx Individual Mask Register 33"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x908++0x03
line.long 0x00 "RXIMR34,Rx Individual Mask Register 34"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x908++0x03
hide.long 0x00 "RXIMR34,Rx Individual Mask Register 34"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x90C++0x03
line.long 0x00 "RXIMR35,Rx Individual Mask Register 35"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x90C++0x03
hide.long 0x00 "RXIMR35,Rx Individual Mask Register 35"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x910++0x03
line.long 0x00 "RXIMR36,Rx Individual Mask Register 36"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x910++0x03
hide.long 0x00 "RXIMR36,Rx Individual Mask Register 36"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x914++0x03
line.long 0x00 "RXIMR37,Rx Individual Mask Register 37"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x914++0x03
hide.long 0x00 "RXIMR37,Rx Individual Mask Register 37"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x918++0x03
line.long 0x00 "RXIMR38,Rx Individual Mask Register 38"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x918++0x03
hide.long 0x00 "RXIMR38,Rx Individual Mask Register 38"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x91C++0x03
line.long 0x00 "RXIMR39,Rx Individual Mask Register 39"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x91C++0x03
hide.long 0x00 "RXIMR39,Rx Individual Mask Register 39"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x920++0x03
line.long 0x00 "RXIMR40,Rx Individual Mask Register 40"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x920++0x03
hide.long 0x00 "RXIMR40,Rx Individual Mask Register 40"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x924++0x03
line.long 0x00 "RXIMR41,Rx Individual Mask Register 41"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x924++0x03
hide.long 0x00 "RXIMR41,Rx Individual Mask Register 41"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x928++0x03
line.long 0x00 "RXIMR42,Rx Individual Mask Register 42"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x928++0x03
hide.long 0x00 "RXIMR42,Rx Individual Mask Register 42"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x92C++0x03
line.long 0x00 "RXIMR43,Rx Individual Mask Register 43"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x92C++0x03
hide.long 0x00 "RXIMR43,Rx Individual Mask Register 43"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x930++0x03
line.long 0x00 "RXIMR44,Rx Individual Mask Register 44"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x930++0x03
hide.long 0x00 "RXIMR44,Rx Individual Mask Register 44"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x934++0x03
line.long 0x00 "RXIMR45,Rx Individual Mask Register 45"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x934++0x03
hide.long 0x00 "RXIMR45,Rx Individual Mask Register 45"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x938++0x03
line.long 0x00 "RXIMR46,Rx Individual Mask Register 46"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x938++0x03
hide.long 0x00 "RXIMR46,Rx Individual Mask Register 46"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x93C++0x03
line.long 0x00 "RXIMR47,Rx Individual Mask Register 47"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x93C++0x03
hide.long 0x00 "RXIMR47,Rx Individual Mask Register 47"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x940++0x03
line.long 0x00 "RXIMR48,Rx Individual Mask Register 48"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x940++0x03
hide.long 0x00 "RXIMR48,Rx Individual Mask Register 48"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x944++0x03
line.long 0x00 "RXIMR49,Rx Individual Mask Register 49"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x944++0x03
hide.long 0x00 "RXIMR49,Rx Individual Mask Register 49"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x948++0x03
line.long 0x00 "RXIMR50,Rx Individual Mask Register 50"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x948++0x03
hide.long 0x00 "RXIMR50,Rx Individual Mask Register 50"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x94C++0x03
line.long 0x00 "RXIMR51,Rx Individual Mask Register 51"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x94C++0x03
hide.long 0x00 "RXIMR51,Rx Individual Mask Register 51"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x950++0x03
line.long 0x00 "RXIMR52,Rx Individual Mask Register 52"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x950++0x03
hide.long 0x00 "RXIMR52,Rx Individual Mask Register 52"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x954++0x03
line.long 0x00 "RXIMR53,Rx Individual Mask Register 53"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x954++0x03
hide.long 0x00 "RXIMR53,Rx Individual Mask Register 53"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x958++0x03
line.long 0x00 "RXIMR54,Rx Individual Mask Register 54"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x958++0x03
hide.long 0x00 "RXIMR54,Rx Individual Mask Register 54"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x95C++0x03
line.long 0x00 "RXIMR55,Rx Individual Mask Register 55"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x95C++0x03
hide.long 0x00 "RXIMR55,Rx Individual Mask Register 55"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x960++0x03
line.long 0x00 "RXIMR56,Rx Individual Mask Register 56"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x960++0x03
hide.long 0x00 "RXIMR56,Rx Individual Mask Register 56"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x964++0x03
line.long 0x00 "RXIMR57,Rx Individual Mask Register 57"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x964++0x03
hide.long 0x00 "RXIMR57,Rx Individual Mask Register 57"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x968++0x03
line.long 0x00 "RXIMR58,Rx Individual Mask Register 58"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x968++0x03
hide.long 0x00 "RXIMR58,Rx Individual Mask Register 58"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x96C++0x03
line.long 0x00 "RXIMR59,Rx Individual Mask Register 59"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x96C++0x03
hide.long 0x00 "RXIMR59,Rx Individual Mask Register 59"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x970++0x03
line.long 0x00 "RXIMR60,Rx Individual Mask Register 60"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x970++0x03
hide.long 0x00 "RXIMR60,Rx Individual Mask Register 60"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x974++0x03
line.long 0x00 "RXIMR61,Rx Individual Mask Register 61"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x974++0x03
hide.long 0x00 "RXIMR61,Rx Individual Mask Register 61"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x978++0x03
line.long 0x00 "RXIMR62,Rx Individual Mask Register 62"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x978++0x03
hide.long 0x00 "RXIMR62,Rx Individual Mask Register 62"
endif
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0x97C++0x03
line.long 0x00 "RXIMR63,Rx Individual Mask Register 63"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x97C++0x03
hide.long 0x00 "RXIMR63,Rx Individual Mask Register 63"
endif
group.long 0xAE0++0x0F
line.long 0x00 "MECR,Memory Error Control Register"
bitfld.long 0x00 31. "ECRWRDIS,Error configuration register write disable" "No,Yes"
bitfld.long 0x00 19. "HANCEI_MSK,Host access with non-correctable errors interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 18. "FANCEI_MSK,FlexCAN access with non-correctable errors interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable errors interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 15. "HAERRIE,Host access error injection enable" "Disabled,Enabled"
bitfld.long 0x00 14. "FAERRIE,FlexCAN access error injection enable" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "EXTERRIE,Extended error injection enable" "32-bit,64-bit"
bitfld.long 0x00 9. "RERRDIS,Error report disable" "No,Yes"
bitfld.long 0x00 8. "ECCDIS,Error correction disable" "No,Yes"
newline
bitfld.long 0x00 7. "NCEFAFRZ,Non-correctable errors in FlexCAN access put device in Freeze Mode" "No,Yes"
line.long 0x04 "ERRIAR,Error Injection Address Register"
hexmask.long 0x04 2.--31. 0x04 "INJADDR_H,Error injection address high"
bitfld.long 0x04 0.--1. "INJADDR_L,Error injection address low" "0,1,2,3"
line.long 0x08 "ERRIDPR,Error Injection Data Pattern Register"
line.long 0x0C "ERRIPPR,Error Injection Parity Pattern Register"
bitfld.long 0x0C 24.--28. "PFLIP3,Parity flip pattern for byte 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x0C 16.--20. "PFLIP2,Parity flip pattern for byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x0C 8.--12. "PFLIP1,Parity flip pattern for byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x0C 0.--4. "PFLIP0,Parity flip pattern for byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0xAF0++0x0B
line.long 0x00 "RERRAR,Error Report Address Register"
bitfld.long 0x00 24. "NCE,Indicates that the report is due to a non-correctable error" "Correctable,Non-correctable"
bitfld.long 0x00 18. "SAID[2],Identification of the requester of the memory read request" "FlexCAN internal,Host - CPU"
bitfld.long 0x00 17. "[1],Details of FlexCAN operation" "Move,Scanning"
newline
bitfld.long 0x00 16. "[0],Operation that requested the memory read" "Transmission,Reception"
hexmask.long.word 0x00 0.--13. 0x01 "ERRADDR,Address where error detected"
line.long 0x04 "RERRDR,Error Report Data Register"
line.long 0x08 "RERRSYNR,Error Report Syndrome Register"
bitfld.long 0x08 31. "BE3,Byte enabled for byte 3 (most significant)" "Not read,Read"
bitfld.long 0x08 24.--28. "SYND3,Error syndrome for byte 3 (most significant)" "0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F"
bitfld.long 0x08 23. "BE2,Byte enabled for byte 2" "Not read,Read"
newline
bitfld.long 0x08 16.--20. "SYND2,Error syndrome for byte 2" "0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F"
bitfld.long 0x08 15. "BE1,Byte enabled for byte 1" "Not read,Read"
bitfld.long 0x08 8.--12. "SYND1,Error syndrome for byte 1" "0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F"
newline
bitfld.long 0x08 7. "BE0,Byte enabled for byte 0 (least significant)" "Not read,Read"
bitfld.long 0x08 0.--4. "SYND0,Error syndrome for byte 0 (least significant)" "0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F"
group.long 0xAFC++0x2B
line.long 0x00 "ERRSR,Error Status Register"
eventfld.long 0x00 19. "HANCEIF,Host access with non-correctable error interrupt flag" "Not detected,Detected"
eventfld.long 0x00 18. "FANCEIF,FlexCAN access with non-correctable error interrupt flag" "Not detected,Detected"
eventfld.long 0x00 16. "CEIF,Correctable error interrupt flag" "Not detected,Detected"
newline
eventfld.long 0x00 3. "HANCEIOF,Host access with non-correctable error interrupt overrun flag" "No overrun,Overrun"
eventfld.long 0x00 2. "FANCEIOF,FlexCAN access with non-correctable error interrupt overrun flag" "No overrun,Overrun"
eventfld.long 0x00 0. "CEIOF,Correctable error interrupt overrun flag" "No overrun,Overrun"
line.long 0x04 "CTRL1_PN,Pretended Networking Control 1 Register"
bitfld.long 0x04 17. "WTOF_MSK,Wake up by timeout flag mask bit" "Disabled,Enabled"
bitfld.long 0x04 16. "WUMF_MSK,Wake up by match flag mask bit" "Disabled,Enabled"
hexmask.long.byte 0x04 8.--15. 0x10 "NMATCH,Number of messages matching the same filtering criteria"
newline
bitfld.long 0x04 4.--5. "PLFS,Payload filtering selection" "Exact value,Greater than/equal,Smaller than/equal,Inside range"
bitfld.long 0x04 2.--3. "IDFS,ID filtering selection" "Exact value,Greater than/equal,Smaller than/equal,Inside range"
bitfld.long 0x04 0.--1. "FCS,Filtering combination selection" "Message ID only,Message ID/payload,Message ID specified,Message ID/payload specified"
line.long 0x08 "CTRL2_PN,Pretended Networking Control 2 Register"
hexmask.long.word 0x08 0.--15. 1. "MATCHTO,Timeout for no message matching the filtering criteria"
line.long 0x0C "WU_MTC,Pretended Networking Wake Up Match Register"
eventfld.long 0x0C 17. "WTOF,Wake up by timeout flag bit" "Not detected,Detected"
eventfld.long 0x0C 16. "WUMF,Wake up by match flag bit" "Not detected,Detected"
rhexmask.long.byte 0x0C 8.--15. 0x10 "MCOUNTER,Number of matches when in pretended networking"
line.long 0x10 "FLT_ID1,Pretended Networking ID Filter 1 Register"
bitfld.long 0x10 30. "FLT_IDE,ID extended filter" "Disabled,Enabled"
bitfld.long 0x10 29. "FLT_RTR,Remote transmission request filter" "Reject,Accept"
hexmask.long 0x10 0.--28. 1. "FLT_ID1,ID filter 1 for pretended networking filtering"
line.long 0x14 "FLT_DLC,Pretended Networking DLC Filter Register"
bitfld.long 0x14 16.--19. "FLT_DLC_LO,Lower limit for length of data bytes filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x14 0.--3. "FLT_DLC_HI,Upper limit for length of data bytes filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "PL1_LO,Pretended Networking Payload Low Filter 1 Register"
hexmask.long.byte 0x18 24.--31. 1. "DATA_B0,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 0"
hexmask.long.byte 0x18 16.--23. 1. "DATA_B1,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 1"
hexmask.long.byte 0x18 8.--15. 1. "DATA_B2,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 2"
newline
hexmask.long.byte 0x18 0.--7. 1. "DATA_B3,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 3"
line.long 0x1C "PL1_LO,Pretended Networking Payload Low Filter 1 Register"
hexmask.long.byte 0x1C 24.--31. 1. "DATA_B4,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 4"
hexmask.long.byte 0x1C 16.--23. 1. "DATA_B5,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 5"
hexmask.long.byte 0x1C 8.--15. 1. "DATA_B6,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 6"
newline
hexmask.long.byte 0x1C 0.--7. 1. "DATA_B7,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 7"
line.long 0x20 "FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register"
bitfld.long 0x20 30. "IDE_MSK,Indicates whether the frame format (standard/extended) is used as part of the ID reception filter" "Don't care,Checked"
bitfld.long 0x20 29. "RTR_MSK,Indicates whether the frame type (data/remote) is part of the ID reception filter" "Don't care,Checked"
hexmask.long 0x20 0.--28. 1. "FLT_ID2_IDMA_SK,ID filter 2 for pretended networking filtering/ID mask bits for pretended networking ID filtering"
line.long 0x24 "PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register"
hexmask.long.byte 0x24 24.--31. 1. "DATA_BYTE_0,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 0"
hexmask.long.byte 0x24 16.--23. 1. "DATA_BYTE_1,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 1"
hexmask.long.byte 0x24 8.--15. 1. "DATA_BYTE_2,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 2"
newline
hexmask.long.byte 0x24 0.--7. 1. "DATA_BYTE_3,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 3"
line.long 0x28 "PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 / Payload High Mask Register"
hexmask.long.byte 0x28 24.--31. 1. "DATA_BYTE_4,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 4"
hexmask.long.byte 0x28 16.--23. 1. "DATA_BYTE_5,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 5"
hexmask.long.byte 0x28 8.--15. 1. "DATA_BYTE_6,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 6"
newline
hexmask.long.byte 0x28 0.--7. 1. "DATA_BYTE_7,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 7"
repeat 4. (increment 0xB40 0x10)(increment 0 1)
rgroup.long $1++0x0F
line.long 0x00 "WMB$1_CS,Wake Up Message Buffer register for C/S"
bitfld.long 0x00 22. "SRR,Substitute remote request" "Recessive,Dominant"
bitfld.long 0x00 21. "IDE,Identifies whether the frame format is standard or extended" "Standard,Extended"
bitfld.long 0x00 20. "RTR,Identifies whether the frame is remote or not" "Not remote,Remote"
newline
bitfld.long 0x00 16.--19. "DLC,Length of data in bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "WMB$1_ID,Wake Up Message Buffer Register for ID"
hexmask.long 0x04 0.--28. 1. "ID,Received ID under Pretended Networking mode"
line.long 0x08 "WMB$1_D03,Wake Up Message Buffer Register for Data 0-3"
hexmask.long.byte 0x08 24.--31. 1. "DATA_BYTE_0,Received payload corresponding to the data byte 0 under Pretended Networking mode"
hexmask.long.byte 0x08 16.--23. 1. "DATA_BYTE_1,Received payload corresponding to the data byte 1 under Pretended Networking mode"
hexmask.long.byte 0x08 8.--15. 1. "DATA_BYTE_2,Received payload corresponding to the data byte 2 under Pretended Networking mode"
newline
hexmask.long.byte 0x08 0.--7. 1. "DATA_BYTE_3,Received payload corresponding to the data byte 3 under Pretended Networking mode"
line.long 0x0C "WMB$1_D47,Wake Up Message Buffer Register for Data 0-3"
hexmask.long.byte 0x0C 24.--31. 1. "DATA_BYTE_4,Received payload corresponding to the data byte 4 under Pretended Networking mode"
hexmask.long.byte 0x0C 16.--23. 1. "DATA_BYTE_5,Received payload corresponding to the data byte 5 under Pretended Networking mode"
hexmask.long.byte 0x0C 8.--15. 1. "DATA_BYTE_6,Received payload corresponding to the data byte 6 under Pretended Networking mode"
newline
hexmask.long.byte 0x0C 0.--7. 1. "DATA_BYTE_7,Received payload corresponding to the data byte 7 under Pretended Networking mode"
repeat.end
if (((per.l((ad:0x02180000))&0x40000000)==0x40000000))
group.long 0xC00++0x07
line.long 0x00 "FDCTRL,CAN FD Control Register"
bitfld.long 0x00 31. "FDRATE,Bit rate switch enable" "Nominal,Switching"
bitfld.long 0x00 19.--20. "MBDSR1,Message buffer data size for Region 1" "8 B,16 B,32 B,64 B"
bitfld.long 0x00 16.--17. "MBDSR0,Message buffer data size for Region 0" "8 B,16 B,32 B,64 B"
newline
bitfld.long 0x00 15. "TDCEN,Transceiver delay compensation enable" "Disabled,Enabled"
eventfld.long 0x00 14. "TDCFAIL,Transceiver delay compensation fail" "In range,Out of range"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver delay compensation offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver delay compensation value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "FDCBT,CAN FD Bit Timing Register"
hexmask.long.word 0x04 20.--29. 0x10 "FPRESDIV,Fast prescaler division factor"
bitfld.long 0x04 16.--17. "FRJW,Fast resync jump width" "0,1,2,3"
bitfld.long 0x04 10.--14. "FPROPSEG,Fast propagation segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x04 5.--7. "FPSEG1,Fast phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "FPSEG2,Fast phase segment 2" "0,1,2,3,4,5,6,7"
else
group.long 0xC00++0x07
line.long 0x00 "FDCTRL,CAN FD Control Register"
bitfld.long 0x00 31. "FDRATE,Bit rate switch enable" "Nominal,Switching"
bitfld.long 0x00 19.--20. "MBDSR1,Message buffer data size for Region 1" "8 B,16 B,32 B,64 B"
bitfld.long 0x00 16.--17. "MBDSR0,Message buffer data size for Region 0" "8 B,16 B,32 B,64 B"
newline
bitfld.long 0x00 15. "TDCEN,Transceiver delay compensation enable" "Disabled,Enabled"
eventfld.long 0x00 14. "TDCFAIL,Transceiver delay compensation fail" "In range,Out of range"
rbitfld.long 0x00 8.--12. "TDCOFF,Transceiver delay compensation offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver delay compensation value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "FDCBT,CAN FD Bit Timing Register"
hexmask.long.word 0x04 20.--29. 0x10 "FPRESDIV,Fast prescaler division factor"
rbitfld.long 0x04 16.--17. "FRJW,Fast resync jump width" "0,1,2,3"
rbitfld.long 0x04 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
rbitfld.long 0x04 5.--7. "FPSEG1,Fast phase segment 1" "0,1,2,3,4,5,6,7"
rbitfld.long 0x04 0.--2. "FPSEG2,Fast phase segment 2" "0,1,2,3,4,5,6,7"
endif
rgroup.long 0xC04++0x03
line.long 0x00 "FDCRC,CAN FD CRC Register"
hexmask.long.byte 0x00 24.--30. 0x01 "FD_MBCRC,CRC mailbox number for FD_TXCRC"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended transmitted CRC value"
tree.end
tree "FlexCAN2"
base ad:0x02190000
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
if (((per.l(ad:0x02190000))&0x100000)==0x100000)
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 30. "FRZ,Freeze enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RFEN,Rx FIFO enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "HALT,Halt FlexCAN" "No freeze,Freeze"
rbitfld.long 0x00 27. "NOTRDY,FlexCAN not ready" "Normal/Listen-Only/Loop-Back,Disable/Doze/Stop/Freeze"
bitfld.long 0x00 26. "WAKMSK,Wake up interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "SOFTRST,Soft reset" "No reset,Reset"
rbitfld.long 0x00 24. "FRZACK,Freeze mode acknowledge" "No freeze,Freeze"
bitfld.long 0x00 23. "SUPV,Supervisor mode" "User,Supervisor"
newline
rbitfld.long 0x00 22. "SLFWAK,Self wake up" "Disabled,Enabled"
bitfld.long 0x00 21. "WRNEN,Warning interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 20. "LPMACK,Low-Power mode acknowledge" "No low-power,Low-power"
newline
bitfld.long 0x00 19. "WAKSRC,Wake up source" "Unfiltered Rx,Filtered Rx"
bitfld.long 0x00 17. "SRXDIS,Self reception disable" "No,Yes"
bitfld.long 0x00 16. "IRMQ,Individual Rx masking and queue enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DMA,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 14. "PNET_EN,Pretended networking enable" "Disabled,Enabled"
bitfld.long 0x00 13. "LPRIOEN,Local priority enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "AEN,Abort enable" "Disabled,Enabled"
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "Disabled,Enabled"
bitfld.long 0x00 8.--9. "IDAM,ID acceptance mode" "Format A,Format B,Format C,Format D"
newline
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Number of the last message buffer"
else
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 30. "FRZ,Freeze enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RFEN,Rx FIFO enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "HALT,Halt FlexCAN" "No freeze,Freeze"
rbitfld.long 0x00 27. "NOTRDY,FlexCAN not ready" "Normal/Listen-Only/Loop-Back,Disable/Doze/Stop/Freeze"
bitfld.long 0x00 26. "WAKMSK,Wake up interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "SOFTRST,Soft reset" "No reset,Reset"
rbitfld.long 0x00 24. "FRZACK,Freeze mode acknowledge" "No freeze,Freeze"
bitfld.long 0x00 23. "SUPV,Supervisor mode" "User,Supervisor"
newline
bitfld.long 0x00 22. "SLFWAK,Self wake up" "Disabled,Enabled"
bitfld.long 0x00 21. "WRNEN,Warning interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 20. "LPMACK,Low-Power mode acknowledge" "No low-power,Low-power"
newline
bitfld.long 0x00 19. "WAKSRC,Wake up source" "Unfiltered Rx,Filtered Rx"
bitfld.long 0x00 17. "SRXDIS,Self reception disable" "No,Yes"
bitfld.long 0x00 16. "IRMQ,Individual Rx masking and queue enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DMA,DMA enable" "Disabled,Enabled"
bitfld.long 0x00 14. "PNET_EN,Pretended networking enable" "Disabled,Enabled"
bitfld.long 0x00 13. "LPRIOEN,Local priority enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "AEN,Abort enable" "Disabled,Enabled"
bitfld.long 0x00 11. "FDEN,CAN FD operation enable" "Disabled,Enabled"
bitfld.long 0x00 8.--9. "IDAM,ID acceptance mode" "Format A,Format B,Format C,Format D"
newline
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Number of the last message buffer"
endif
else
if (((per.l(ad:0x02190000))&0x100000)==0x100000)
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 30. "FRZ,Freeze enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RFEN,Rx FIFO enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "HALT,Halt FlexCAN" "No freeze,Freeze"
rbitfld.long 0x00 27. "NOTRDY,FlexCAN not ready" "Normal/Listen-Only/Loop-Back,Disable/Doze/Stop/Freeze"
bitfld.long 0x00 26. "WAKMSK,Wake up interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "SOFTRST,Soft reset" "No reset,Reset"
rbitfld.long 0x00 24. "FRZACK,Freeze mode acknowledge" "No freeze,Freeze"
bitfld.long 0x00 23. "SUPV,Supervisor mode" "User,Supervisor"
newline
rbitfld.long 0x00 22. "SLFWAK,Self wake up" "Disabled,Enabled"
bitfld.long 0x00 21. "WRNEN,Warning interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 20. "LPMACK,Low-Power mode acknowledge" "No low-power,Low-power"
newline
bitfld.long 0x00 19. "WAKSRC,Wake up source" "Unfiltered Rx,Filtered Rx"
bitfld.long 0x00 17. "SRXDIS,Self reception disable" "No,Yes"
bitfld.long 0x00 16. "IRMQ,Individual Rx masking and queue enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DMA,DMA enable" "Disabled,Enabled"
rbitfld.long 0x00 14. "PNET_EN,Pretended networking enable" "Disabled,Enabled"
bitfld.long 0x00 13. "LPRIOEN,Local priority enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "AEN,Abort enable" "Disabled,Enabled"
rbitfld.long 0x00 11. "FDEN,CAN FD operation enable" "Disabled,Enabled"
bitfld.long 0x00 8.--9. "IDAM,ID acceptance mode" "Format A,Format B,Format C,Format D"
newline
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Number of the last message buffer"
else
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 30. "FRZ,Freeze enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RFEN,Rx FIFO enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "HALT,Halt FlexCAN" "No freeze,Freeze"
rbitfld.long 0x00 27. "NOTRDY,FlexCAN not ready" "Normal/Listen-Only/Loop-Back,Disable/Doze/Stop/Freeze"
bitfld.long 0x00 26. "WAKMSK,Wake up interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "SOFTRST,Soft reset" "No reset,Reset"
rbitfld.long 0x00 24. "FRZACK,Freeze mode acknowledge" "No freeze,Freeze"
bitfld.long 0x00 23. "SUPV,Supervisor mode" "User,Supervisor"
newline
bitfld.long 0x00 22. "SLFWAK,Self wake up" "Disabled,Enabled"
bitfld.long 0x00 21. "WRNEN,Warning interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 20. "LPMACK,Low-Power mode acknowledge" "No low-power,Low-power"
newline
bitfld.long 0x00 19. "WAKSRC,Wake up source" "Unfiltered Rx,Filtered Rx"
bitfld.long 0x00 17. "SRXDIS,Self reception disable" "No,Yes"
bitfld.long 0x00 16. "IRMQ,Individual Rx masking and queue enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "DMA,DMA enable" "Disabled,Enabled"
rbitfld.long 0x00 14. "PNET_EN,Pretended networking enable" "Disabled,Enabled"
bitfld.long 0x00 13. "LPRIOEN,Local priority enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "AEN,Abort enable" "Disabled,Enabled"
rbitfld.long 0x00 11. "FDEN,CAN FD operation enable" "Disabled,Enabled"
bitfld.long 0x00 8.--9. "IDAM,ID acceptance mode" "Format A,Format B,Format C,Format D"
newline
hexmask.long.byte 0x00 0.--6. 1. "MAXMB,Number of the last message buffer"
endif
endif
group.long 0x04++0x07
line.long 0x00 "CTRL1,Control 1 Register"
hexmask.long.byte 0x00 24.--31. 1. "PRESDIV,Prescaler division factor"
bitfld.long 0x00 22.--23. "RJW,Resync jump width" "0,1,2,3"
bitfld.long 0x00 19.--21. "PSEG1,Phase segment 1" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--18. "PSEG2,Phase segment 2" ",1,2,3,4,5,6,7"
bitfld.long 0x00 15. "BOFFMSK,Bus off interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 14. "ERRMSK,Error interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "CLKSRC,CAN engine clock source" "Oscillator,Peripheral"
bitfld.long 0x00 12. "LPB,Loop back mode" "Disabled,Enabled"
bitfld.long 0x00 11. "TWRNMSK,Tx warning interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "RWRNMSK,Rx warning interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 7. "SMP,CAN bit sampling" "1 sample,3 samples"
bitfld.long 0x00 6. "BOFFREC,Bus off recovery disable" "No,Yes"
newline
bitfld.long 0x00 5. "TSYN,Timer sync" "Disabled,Enabled"
bitfld.long 0x00 4. "LBUF,Lowest buffer transmitted first" "Highest first,Lowest first"
bitfld.long 0x00 3. "LOM,Listen-Only mode" "Disabled,Enabled"
newline
bitfld.long 0x00 0.--2. "PROPSEG,Propagation segment" "0,1,2,3,4,5,6,7"
line.long 0x04 "TIMER,Free Running Timer"
hexmask.long.word 0x04 0.--15. 1. "TIMER,Timer value"
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x10++0x0B
line.long 0x00 "RXMGMASK,Rx Mailboxes Global Mask Register"
bitfld.long 0x00 31. "MG[31],RX mailboxes global mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],RX mailboxes global mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],RX mailboxes global mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],RX mailboxes global mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],RX mailboxes global mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],RX mailboxes global mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],RX mailboxes global mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],RX mailboxes global mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],RX mailboxes global mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],RX mailboxes global mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],RX mailboxes global mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],RX mailboxes global mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],RX mailboxes global mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],RX mailboxes global mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],RX mailboxes global mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],RX mailboxes global mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],RX mailboxes global mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],RX mailboxes global mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],RX mailboxes global mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],RX mailboxes global mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],RX mailboxes global mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],RX mailboxes global mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],RX mailboxes global mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],RX mailboxes global mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],RX mailboxes global mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],RX mailboxes global mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],RX mailboxes global mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],RX mailboxes global mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],RX mailboxes global mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],RX mailboxes global mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],RX mailboxes global mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],RX mailboxes global mask bit 0" "Not masked,Masked"
line.long 0x04 "RX14MASK,Rx Buffer 14 Mask Register"
bitfld.long 0x04 31. "RX14M[31],RX buffer 14 mask bit 31" "Not masked,Masked"
bitfld.long 0x04 30. "[30],RX buffer 14 mask bit 30" "Not masked,Masked"
bitfld.long 0x04 29. "[29],RX buffer 14 mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x04 28. "[28],RX buffer 14 mask bit 28" "Not masked,Masked"
bitfld.long 0x04 27. "[27],RX buffer 14 mask bit 27" "Not masked,Masked"
bitfld.long 0x04 26. "[26],RX buffer 14 mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x04 25. "[25],RX buffer 14 mask bit 25" "Not masked,Masked"
bitfld.long 0x04 24. "[24],RX buffer 14 mask bit 24" "Not masked,Masked"
bitfld.long 0x04 23. "[23],RX buffer 14 mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x04 22. "[22],RX buffer 14 mask bit 22" "Not masked,Masked"
bitfld.long 0x04 21. "[21],RX buffer 14 mask bit 21" "Not masked,Masked"
bitfld.long 0x04 20. "[20],RX buffer 14 mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x04 19. "[19],RX buffer 14 mask bit 19" "Not masked,Masked"
bitfld.long 0x04 18. "[18],RX buffer 14 mask bit 18" "Not masked,Masked"
bitfld.long 0x04 17. "[17],RX buffer 14 mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x04 16. "[16],RX buffer 14 mask bit 16" "Not masked,Masked"
bitfld.long 0x04 15. "[15],RX buffer 14 mask bit 15" "Not masked,Masked"
bitfld.long 0x04 14. "[14],RX buffer 14 mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x04 13. "[13],RX buffer 14 mask bit 13" "Not masked,Masked"
bitfld.long 0x04 12. "[12],RX buffer 14 mask bit 12" "Not masked,Masked"
bitfld.long 0x04 11. "[11],RX buffer 14 mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x04 10. "[10],RX buffer 14 mask bit 10" "Not masked,Masked"
bitfld.long 0x04 9. "[9],RX buffer 14 mask bit 9" "Not masked,Masked"
bitfld.long 0x04 8. "[8],RX buffer 14 mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x04 7. "[7],RX buffer 14 mask bit 7" "Not masked,Masked"
bitfld.long 0x04 6. "[6],RX buffer 14 mask bit 6" "Not masked,Masked"
bitfld.long 0x04 5. "[5],RX buffer 14 mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x04 4. "[4],RX buffer 14 mask bit 4" "Not masked,Masked"
bitfld.long 0x04 3. "[3],RX buffer 14 mask bit 3" "Not masked,Masked"
bitfld.long 0x04 2. "[2],RX buffer 14 mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x04 1. "[1],RX buffer 14 mask bit 1" "Not masked,Masked"
bitfld.long 0x04 0. "[0],RX buffer 14 mask bit 0" "Not masked,Masked"
line.long 0x08 "RX15MASK,Rx Buffer 15 Mask Register"
bitfld.long 0x08 31. "RX15M[31],RX buffer 15 mask bit 31" "Not masked,Masked"
bitfld.long 0x08 30. "[30],RX buffer 15 mask bit 30" "Not masked,Masked"
bitfld.long 0x08 29. "[30],RX buffer 15 mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x08 28. "[28],RX buffer 15 mask bit 28" "Not masked,Masked"
bitfld.long 0x08 27. "[27],RX buffer 15 mask bit 27" "Not masked,Masked"
bitfld.long 0x08 26. "[26],RX buffer 15 mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x08 25. "[25],RX buffer 15 mask bit 25" "Not masked,Masked"
bitfld.long 0x08 24. "[24],RX buffer 15 mask bit 24" "Not masked,Masked"
bitfld.long 0x08 23. "[23],RX buffer 15 mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x08 22. "[22],RX buffer 15 mask bit 22" "Not masked,Masked"
bitfld.long 0x08 21. "[21],RX buffer 15 mask bit 21" "Not masked,Masked"
bitfld.long 0x08 20. "[20],RX buffer 15 mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x08 19. "[19],RX buffer 15 mask bit 19" "Not masked,Masked"
bitfld.long 0x08 18. "[18],RX buffer 15 mask bit 18" "Not masked,Masked"
bitfld.long 0x08 17. "[17],RX buffer 15 mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x08 16. "[16],RX buffer 15 mask bit 16" "Not masked,Masked"
bitfld.long 0x08 15. "[15],RX buffer 15 mask bit 15" "Not masked,Masked"
bitfld.long 0x08 14. "[14],RX buffer 15 mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x08 13. "[13],RX buffer 15 mask bit 13" "Not masked,Masked"
bitfld.long 0x08 12. "[12],RX buffer 15 mask bit 12" "Not masked,Masked"
bitfld.long 0x08 11. "[11],RX buffer 15 mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x08 10. "[10],RX buffer 15 mask bit 10" "Not masked,Masked"
bitfld.long 0x08 9. "[9],RX buffer 15 mask bit 9" "Not masked,Masked"
bitfld.long 0x08 8. "[8],RX buffer 15 mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x08 7. "[7],RX buffer 15 mask bit 7" "Not masked,Masked"
bitfld.long 0x08 6. "[6],RX buffer 15 mask bit 6" "Not masked,Masked"
bitfld.long 0x08 5. "[5],RX buffer 15 mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x08 4. "[4],RX buffer 15 mask bit 4" "Not masked,Masked"
bitfld.long 0x08 3. "[3],RX buffer 15 mask bit 3" "Not masked,Masked"
bitfld.long 0x08 2. "[2],RX buffer 15 mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x08 1. "[1],RX buffer 15 mask bit 1" "Not masked,Masked"
bitfld.long 0x08 0. "[0],RX buffer 15 mask bit 0" "Not masked,Masked"
else
rgroup.long 0x10++0x0B
line.long 0x00 "RXMGMASK,Rx Mailboxes Global Mask Register"
bitfld.long 0x00 31. "MG[31],RX mailboxes global mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],RX mailboxes global mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],RX mailboxes global mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],RX mailboxes global mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],RX mailboxes global mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],RX mailboxes global mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],RX mailboxes global mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],RX mailboxes global mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],RX mailboxes global mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],RX mailboxes global mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],RX mailboxes global mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],RX mailboxes global mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],RX mailboxes global mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],RX mailboxes global mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],RX mailboxes global mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],RX mailboxes global mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],RX mailboxes global mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],RX mailboxes global mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],RX mailboxes global mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],RX mailboxes global mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],RX mailboxes global mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],RX mailboxes global mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],RX mailboxes global mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],RX mailboxes global mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],RX mailboxes global mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],RX mailboxes global mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],RX mailboxes global mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],RX mailboxes global mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],RX mailboxes global mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],RX mailboxes global mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],RX mailboxes global mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],RX mailboxes global mask bit 0" "Not masked,Masked"
line.long 0x04 "RX14MASK,Rx Buffer 14 Mask Register"
bitfld.long 0x04 31. "RX14M[31],RX buffer 14 mask bit 31" "Not masked,Masked"
bitfld.long 0x04 30. "[30],RX buffer 14 mask bit 30" "Not masked,Masked"
bitfld.long 0x04 29. "[29],RX buffer 14 mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x04 28. "[28],RX buffer 14 mask bit 28" "Not masked,Masked"
bitfld.long 0x04 27. "[27],RX buffer 14 mask bit 27" "Not masked,Masked"
bitfld.long 0x04 26. "[26],RX buffer 14 mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x04 25. "[25],RX buffer 14 mask bit 25" "Not masked,Masked"
bitfld.long 0x04 24. "[24],RX buffer 14 mask bit 24" "Not masked,Masked"
bitfld.long 0x04 23. "[23],RX buffer 14 mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x04 22. "[22],RX buffer 14 mask bit 22" "Not masked,Masked"
bitfld.long 0x04 21. "[21],RX buffer 14 mask bit 21" "Not masked,Masked"
bitfld.long 0x04 20. "[20],RX buffer 14 mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x04 19. "[19],RX buffer 14 mask bit 19" "Not masked,Masked"
bitfld.long 0x04 18. "[18],RX buffer 14 mask bit 18" "Not masked,Masked"
bitfld.long 0x04 17. "[17],RX buffer 14 mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x04 16. "[16],RX buffer 14 mask bit 16" "Not masked,Masked"
bitfld.long 0x04 15. "[15],RX buffer 14 mask bit 15" "Not masked,Masked"
bitfld.long 0x04 14. "[14],RX buffer 14 mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x04 13. "[13],RX buffer 14 mask bit 13" "Not masked,Masked"
bitfld.long 0x04 12. "[12],RX buffer 14 mask bit 12" "Not masked,Masked"
bitfld.long 0x04 11. "[11],RX buffer 14 mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x04 10. "[10],RX buffer 14 mask bit 10" "Not masked,Masked"
bitfld.long 0x04 9. "[9],RX buffer 14 mask bit 9" "Not masked,Masked"
bitfld.long 0x04 8. "[8],RX buffer 14 mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x04 7. "[7],RX buffer 14 mask bit 7" "Not masked,Masked"
bitfld.long 0x04 6. "[6],RX buffer 14 mask bit 6" "Not masked,Masked"
bitfld.long 0x04 5. "[5],RX buffer 14 mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x04 4. "[4],RX buffer 14 mask bit 4" "Not masked,Masked"
bitfld.long 0x04 3. "[3],RX buffer 14 mask bit 3" "Not masked,Masked"
bitfld.long 0x04 2. "[2],RX buffer 14 mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x04 1. "[1],RX buffer 14 mask bit 1" "Not masked,Masked"
bitfld.long 0x04 0. "[0],RX buffer 14 mask bit 0" "Not masked,Masked"
line.long 0x08 "RX15MASK,Rx Buffer 15 Mask Register"
bitfld.long 0x08 31. "RX15M[31],RX buffer 15 mask bit 31" "Not masked,Masked"
bitfld.long 0x08 30. "[30],RX buffer 15 mask bit 30" "Not masked,Masked"
bitfld.long 0x08 29. "[29],RX buffer 15 mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x08 28. "[28],RX buffer 15 mask bit 28" "Not masked,Masked"
bitfld.long 0x08 27. "[27],RX buffer 15 mask bit 27" "Not masked,Masked"
bitfld.long 0x08 26. "[26],RX buffer 15 mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x08 25. "[25],RX buffer 15 mask bit 25" "Not masked,Masked"
bitfld.long 0x08 24. "[24],RX buffer 15 mask bit 24" "Not masked,Masked"
bitfld.long 0x08 23. "[23],RX buffer 15 mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x08 22. "[22],RX buffer 15 mask bit 22" "Not masked,Masked"
bitfld.long 0x08 21. "[21],RX buffer 15 mask bit 21" "Not masked,Masked"
bitfld.long 0x08 20. "[20],RX buffer 15 mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x08 19. "[19],RX buffer 15 mask bit 19" "Not masked,Masked"
bitfld.long 0x08 18. "[18],RX buffer 15 mask bit 18" "Not masked,Masked"
bitfld.long 0x08 17. "[17],RX buffer 15 mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x08 16. "[16],RX buffer 15 mask bit 16" "Not masked,Masked"
bitfld.long 0x08 15. "[15],RX buffer 15 mask bit 15" "Not masked,Masked"
bitfld.long 0x08 14. "[14],RX buffer 15 mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x08 13. "[13],RX buffer 15 mask bit 13" "Not masked,Masked"
bitfld.long 0x08 12. "[12],RX buffer 15 mask bit 12" "Not masked,Masked"
bitfld.long 0x08 11. "[11],RX buffer 15 mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x08 10. "[10],RX buffer 15 mask bit 10" "Not masked,Masked"
bitfld.long 0x08 9. "[9],RX buffer 15 mask bit 9" "Not masked,Masked"
bitfld.long 0x08 8. "[8],RX buffer 15 mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x08 7. "[7],RX buffer 15 mask bit 7" "Not masked,Masked"
bitfld.long 0x08 6. "[6],RX buffer 15 mask bit 6" "Not masked,Masked"
bitfld.long 0x08 5. "[5],RX buffer 15 mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x08 4. "[4],RX buffer 15 mask bit 4" "Not masked,Masked"
bitfld.long 0x08 3. "[3],RX buffer 15 mask bit 3" "Not masked,Masked"
bitfld.long 0x08 2. "[2],RX buffer 15 mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x08 1. "[1],RX buffer 15 mask bit 1" "Not masked,Masked"
bitfld.long 0x08 0. "[0],RX buffer 15 mask bit 0" "Not masked,Masked"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x1C++0x03
line.long 0x00 "ECR,Error Counter Register"
rhexmask.long.byte 0x00 24.--31. 1. "RXERRCNT_FAST,Receive error counter for fast bits"
rhexmask.long.byte 0x00 16.--23. 1. "TXERRCNT_FAST,Transmit error counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RX_ERR_COUNTER,Receive error counter"
newline
hexmask.long.byte 0x00 0.--7. 1. "TX_ERR_COUNTER,Transmit error counter"
else
rgroup.long 0x1C++0x03
line.long 0x00 "ECR,Error Counter Register"
hexmask.long.byte 0x00 24.--31. 1. "RXERRCNT_FAST,Receive error counter for fast bits"
hexmask.long.byte 0x00 16.--23. 1. "TXERRCNT_FAST,Transmit error counter for fast bits"
hexmask.long.byte 0x00 8.--15. 1. "RX_ERR_COUNTER,Receive error counter"
newline
hexmask.long.byte 0x00 0.--7. 1. "TX_ERR_COUNTER,Transmit error counter"
endif
newline
hgroup.long 0x20++0x03
hide.long 0x00 "ESR1,Error and Status 1 Register"
in
newline
group.long 0x24++0x0B
line.long 0x00 "IMASK2,Interrupt Masks 2 Register"
bitfld.long 0x00 31. "BUF[63]TO32M,Buffer MB63 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 30. "[62],Buffer MB62 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 29. "[61],Buffer MB61 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "[60],Buffer MB60 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 27. "[59],Buffer MB59 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 26. "[58],Buffer MB58 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "[57],Buffer MB57 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 24. "[56],Buffer MB56 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 23. "[55],Buffer MB55 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 22. "[54],Buffer MB54 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 21. "[53],Buffer MB52 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 20. "[51],Buffer MB51 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "[50],Buffer MB50 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 18. "[49],Buffer MB49 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 17. "[48],Buffer MB48 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "[47],Buffer MB47 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 15. "[46],Buffer MB46 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "[45],Buffer MB45 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "[44],Buffer MB44 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 12. "[43],Buffer MB43 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 11. "[42],Buffer MB42 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "[10],Buffer MB10 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 9. "[41],Buffer MB41 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "[40],Buffer MB40 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "[39],Buffer MB39 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 6. "[38],Buffer MB38 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "[37],Buffer MB37 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "[36],Buffer MB36 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 3. "[35],Buffer MB35 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[34],Buffer MB34 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "[33],Buffer MB33 interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[32],Buffer MB32 interrupt enable" "Disabled,Enabled"
line.long 0x04 "IMASK1,Interrupt Masks 1 Register"
bitfld.long 0x04 31. "BUF[31]TO0M,Buffer MB31 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 30. "[30],Buffer MB30 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 29. "[29],Buffer MB29 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 28. "[28],Buffer MB28 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 27. "[27],Buffer MB27 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 26. "[26],Buffer MB26 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 25. "[25],Buffer MB25 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 24. "[24],Buffer MB24 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 23. "[23],Buffer MB23 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 22. "[22],Buffer MB22 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 21. "[21],Buffer MB21 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 20. "[20],Buffer MB20 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 19. "[19],Buffer MB19 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 18. "[18],Buffer MB18 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 17. "[17],Buffer MB17 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 16. "[16],Buffer MB16 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 15. "[15],Buffer MB15 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 14. "[14],Buffer MB14 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 13. "[13],Buffer MB13 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 12. "[12],Buffer MB12 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 11. "[11],Buffer MB11 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 10. "[10],Buffer MB10 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 9. "[9],Buffer MB9 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 8. "[8],Buffer MB8 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 7. "[7],Buffer MB7 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 6. "[6],Buffer MB6 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 5. "[5],Buffer MB5 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 4. "[4],Buffer MB4 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 3. "[3],Buffer MB3 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 2. "[2],Buffer MB2 interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 1. "[1],Buffer MB1 interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 0. "[0],Buffer MB0 interrupt enable" "Disabled,Enabled"
line.long 0x08 "IFLAG2,Interrupt Flags 2 Register"
eventfld.long 0x08 31. "BUF[63]TO32I,Buffer MB63 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 30. "[62],Buffer MB62 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 29. "[61],Buffer MB61 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 28. "[60],Buffer MB60 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 27. "[59],Buffer MB59 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 26. "[58],Buffer MB58 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 25. "[57],Buffer MB57 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 24. "[56],Buffer MB56 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 23. "[55],Buffer MB55 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 22. "[54],Buffer MB54 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 21. "[53],Buffer MB53 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 20. "[52],Buffer MB52 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 19. "[51],Buffer MB51 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 18. "[50],Buffer MB50 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 17. "[49],Buffer MB49 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 16. "[48],Buffer MB48 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 15. "[47],Buffer MB47 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 14. "[46],Buffer MB46 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 13. "[45],Buffer MB45 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 12. "[44],Buffer MB44 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 11. "[43],Buffer MB43 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 10. "[42],Buffer MB42 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 9. "[41],Buffer MB41 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 8. "[40],Buffer MB40 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 7. "[39],Buffer MB39 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 6. "[38],Buffer MB38 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 5. "[37],Buffer MB37 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 4. "[36],Buffer MB36 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 3. "[35],Buffer MB35 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 2. "[34],Buffer MB34 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x08 1. "[33],Buffer MB33 interrupt" "Not occurred,Occurred"
eventfld.long 0x08 0. "[32],Buffer MB32 interrupt" "Not occurred,Occurred"
if (((per.l(ad:0x02190000))&0x20008000)==0x20000000)
group.long 0x30++0x03
line.long 0x00 "IFLAG1,Interrupt Flags 1 Register"
eventfld.long 0x00 31. "BUF[31]TO8I,Buffer MB31 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 30. "[30],Buffer MB30 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 29. "[29],Buffer MB29 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 28. "[28],Buffer MB28 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 27. "[27],Buffer MB27 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 26. "[26],Buffer MB26 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 25. "[25],Buffer MB25 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 24. "[24],Buffer MB24 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 23. "[23],Buffer MB23 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 22. "[22],Buffer MB22 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 21. "[21],Buffer MB21 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 20. "[20],Buffer MB20 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 19. "[19],Buffer MB19 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 18. "[18],Buffer MB18 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 17. "[17],Buffer MB17 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 16. "[16],Buffer MB16 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 15. "[15],Buffer MB15 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 14. "[14],Buffer MB14 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 13. "[13],Buffer MB13 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 12. "[12],Buffer MB12 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 11. "[11],Buffer MB11 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 10. "[10],Buffer MB10 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 9. "[9],Buffer MB9 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 8. "[8],Buffer MB8 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 7. "BUF7I,Buffer MB7 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 6. "BUF6I,Buffer MB6 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 5. "BUF5I,Buffer MB5 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 0. "BUF0I,Buffer MB0 interrupt" "Not occurred,Occurred"
else
group.long 0x30++0x03
line.long 0x00 "IFLAG1,Interrupt Flags 1 Register"
eventfld.long 0x00 31. "BUF[31]TO8I,Buffer MB31 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 30. "[30],Buffer MB30 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 29. "[29],Buffer MB29 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 28. "[28],Buffer MB28 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 27. "[27],Buffer MB27 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 26. "[26],Buffer MB26 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 25. "[25],Buffer MB25 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 24. "[24],Buffer MB24 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 23. "[23],Buffer MB23 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 22. "[22],Buffer MB22 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 21. "[21],Buffer MB21 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 20. "[20],Buffer MB20 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 19. "[19],Buffer MB19 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 18. "[18],Buffer MB18 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 17. "[17],Buffer MB17 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 16. "[16],Buffer MB16 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 15. "[15],Buffer MB15 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 14. "[14],Buffer MB14 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 13. "[13],Buffer MB13 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 12. "[12],Buffer MB12 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 11. "[11],Buffer MB11 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 10. "[10],Buffer MB10 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 9. "[9],Buffer MB9 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 8. "[8],Buffer MB8 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 7. "BUF7I,Buffer MB7 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 6. "BUF6I,Buffer MB6 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 5. "BUF5I,Buffer MB5 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 4. "BUF[4]TO1I,Buffer MB4 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 3. "[3],Buffer MB3 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 2. "[2],Buffer MB2 interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x00 1. "[1],Buffer MB1 interrupt" "Not occurred,Occurred"
eventfld.long 0x00 0. "BUF0I,Buffer MB0 interrupt" "Not occurred,Occurred"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x34++0x03
line.long 0x00 "CTRL2,Control 2 Register"
bitfld.long 0x00 31. "ERRMSK_FAST,Error interrupt mask for errors detected in the data phase of fast CAN FD frames" "Disabled,Enabled"
bitfld.long 0x00 30. "BOFFDONEMSK,Bus off done interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 29. "ECRWRE,Error-correction configuration register write enable" "Disabled,Enabled"
newline
bitfld.long 0x00 28. "WRMFRZ,Write-access to memory in freeze mode" "Disabled,Enabled"
bitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO filters" "8,16,24,32,40,48,56,64,72,80,88,96,104,112,120,128"
bitfld.long 0x00 19.--23. "TASD,Tx arbitration start delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 18. "MRP,Mailboxes reception priority" "Rx FIFO-mailboxes,Mailboxes-Rx FIFO"
bitfld.long 0x00 17. "RRS,Remote request storing" "Generated,Stored"
bitfld.long 0x00 16. "EACEN,Entire frame arbitration field comparison enable for Rx mailboxes" "IDE on-RTR off,IDE and RTR on"
newline
bitfld.long 0x00 15. "TIMER_SRC,Timer source" "CAN bit clock,External"
else
group.long 0x34++0x03
line.long 0x00 "CTRL2,Control 2 Register"
bitfld.long 0x00 31. "ERRMSK_FAST,Error interrupt mask for errors detected in the data phase of fast CAN FD frames" "Disabled,Enabled"
bitfld.long 0x00 30. "BOFFDONEMSK,Bus off done interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 29. "ECRWRE,Error-correction configuration register write enable" "Disabled,Enabled"
newline
rbitfld.long 0x00 28. "WRMFRZ,Write-access to memory in freeze mode" "Disabled,Enabled"
rbitfld.long 0x00 24.--27. "RFFN,Number of Rx FIFO filters" "8,16,24,32,40,48,56,64,72,80,88,96,104,112,120,128"
rbitfld.long 0x00 19.--23. "TASD,Tx arbitration start delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
rbitfld.long 0x00 18. "MRP,Mailboxes reception priority" "Rx FIFO-Mailboxes,Mailboxes-Rx FIFO"
rbitfld.long 0x00 17. "RRS,Remote request storing" "Generated,Stored"
rbitfld.long 0x00 16. "EACEN,Entire frame arbitration field comparison enable for Rx mailboxes" "IDE on-RTR off,IDE and RTR on"
newline
rbitfld.long 0x00 15. "TIMER_SRC,Timer source" "CAN bit clock,External"
endif
if (((per.l((ad:0x02190000)+0x38)&0x4000)==0x4000))
rgroup.long 0x38++0x03
line.long 0x00 "ESR2,Error and Status 2 Register"
hexmask.long.byte 0x00 16.--22. 1. "LPTM,Lowest priority tx mailbox"
bitfld.long 0x00 14. "VPS,IMB and LPTM contents valid indicator" "Invalid,Valid"
bitfld.long 0x00 13. "IMB,Indicates whether there is any inactive mailbox" "No inactive mailbox,Inactive mailbox"
else
rgroup.long 0x38++0x03
line.long 0x00 "ESR2,Error and Status 2 Register"
bitfld.long 0x00 14. "VPS,IMB and LPTM contents valid indicator" "Invalid,Valid"
endif
rgroup.long 0x44++0x03
line.long 0x00 "CRCR,CRC Register"
hexmask.long.byte 0x00 16.--22. 1. "MBCRC,CRC mailbox"
hexmask.long.word 0x00 0.--14. 1. "TXCRC,Transmitted CRC value"
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x48++0x03
line.long 0x00 "RXFGMASK,Rx FIFO Global Mask Register"
bitfld.long 0x00 31. "FMG[31],RX mailboxes global mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],RX mailboxes global mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],RX mailboxes global mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],RX mailboxes global mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],RX mailboxes global mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],RX mailboxes global mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],RX mailboxes global mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],RX mailboxes global mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],RX mailboxes global mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],RX mailboxes global mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],RX mailboxes global mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],RX mailboxes global mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],RX mailboxes global mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],RX mailboxes global mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],RX mailboxes global mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],RX mailboxes global mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],RX mailboxes global mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],RX mailboxes global mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],RX mailboxes global mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],RX mailboxes global mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],RX mailboxes global mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],RX mailboxes global mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],RX mailboxes global mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],RX mailboxes global mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],RX mailboxes global mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],RX mailboxes global mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],RX mailboxes global mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],RX mailboxes global mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],RX mailboxes global mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],RX mailboxes global mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],RX mailboxes global mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],RX mailboxes global mask bit 0" "Not masked,Masked"
else
rgroup.long 0x48++0x03
line.long 0x00 "RXFGMASK,Rx FIFO Global Mask Register"
bitfld.long 0x00 31. "FMG[31],RX mailboxes global mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],RX mailboxes global mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],RX mailboxes global mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],RX mailboxes global mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],RX mailboxes global mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],RX mailboxes global mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],RX mailboxes global mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],RX mailboxes global mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],RX mailboxes global mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],RX mailboxes global mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],RX mailboxes global mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],RX mailboxes global mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],RX mailboxes global mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],RX mailboxes global mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],RX mailboxes global mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],RX mailboxes global mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],RX mailboxes global mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],RX mailboxes global mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],RX mailboxes global mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],RX mailboxes global mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],RX mailboxes global mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],RX mailboxes global mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],RX mailboxes global mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],RX mailboxes global mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],RX mailboxes global mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],RX mailboxes global mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],RX mailboxes global mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],RX mailboxes global mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],RX mailboxes global mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],RX mailboxes global mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],RX mailboxes global mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],RX mailboxes global mask bit 0" "Not masked,Masked"
endif
if (((per.l(ad:0x02190000+0x30))&0x20)==0x20)
group.long 0x4C++0x03
line.long 0x00 "RXFIR,Rx FIFO Information Register"
hexmask.long.word 0x00 0.--8. 1. "IDHIT,Identifier acceptance filter hit by the received message that is in the output of the Rx FIFO"
else
hgroup.long 0x4C++0x03
hide.long 0x00 "RXFIR,Rx FIFO Information Register"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x50++0x03
line.long 0x00 "CBT,CAN Bit Timing Register"
bitfld.long 0x00 31. "BTF,Bit timing format enable" "Disabled,Enabled"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended prescaler division factor"
bitfld.long 0x00 16.--19. "ERJW,Extended resync jump width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 10.--15. "EPROPSEG,Extended propagation segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended phase segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "EPSEG2,Extended phase segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
else
rgroup.long 0x50++0x03
line.long 0x00 "CBT,CAN Bit Timing Register"
bitfld.long 0x00 31. "BTF,Bit timing format enable" "Disabled,Enabled"
hexmask.long.word 0x00 21.--30. 1. "EPRESDIV,Extended prescaler division factor"
bitfld.long 0x00 16.--19. "ERJW,Extended resync jump width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 10.--15. "EPROPSEG,Extended propagation segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 5.--9. "EPSEG1,Extended phase segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "EPSEG2,Extended phase segment 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x880++0x03
line.long 0x00 "RXIMR0,Rx Individual Mask Register 0"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x880++0x03
hide.long 0x00 "RXIMR0,Rx Individual Mask Register 0"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x884++0x03
line.long 0x00 "RXIMR1,Rx Individual Mask Register 1"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x884++0x03
hide.long 0x00 "RXIMR1,Rx Individual Mask Register 1"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x888++0x03
line.long 0x00 "RXIMR2,Rx Individual Mask Register 2"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x888++0x03
hide.long 0x00 "RXIMR2,Rx Individual Mask Register 2"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x88C++0x03
line.long 0x00 "RXIMR3,Rx Individual Mask Register 3"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x88C++0x03
hide.long 0x00 "RXIMR3,Rx Individual Mask Register 3"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x890++0x03
line.long 0x00 "RXIMR4,Rx Individual Mask Register 4"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x890++0x03
hide.long 0x00 "RXIMR4,Rx Individual Mask Register 4"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x894++0x03
line.long 0x00 "RXIMR5,Rx Individual Mask Register 5"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x894++0x03
hide.long 0x00 "RXIMR5,Rx Individual Mask Register 5"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x898++0x03
line.long 0x00 "RXIMR6,Rx Individual Mask Register 6"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x898++0x03
hide.long 0x00 "RXIMR6,Rx Individual Mask Register 6"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x89C++0x03
line.long 0x00 "RXIMR7,Rx Individual Mask Register 7"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x89C++0x03
hide.long 0x00 "RXIMR7,Rx Individual Mask Register 7"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8A0++0x03
line.long 0x00 "RXIMR8,Rx Individual Mask Register 8"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8A0++0x03
hide.long 0x00 "RXIMR8,Rx Individual Mask Register 8"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8A4++0x03
line.long 0x00 "RXIMR9,Rx Individual Mask Register 9"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8A4++0x03
hide.long 0x00 "RXIMR9,Rx Individual Mask Register 9"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8A8++0x03
line.long 0x00 "RXIMR10,Rx Individual Mask Register 10"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8A8++0x03
hide.long 0x00 "RXIMR10,Rx Individual Mask Register 10"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8AC++0x03
line.long 0x00 "RXIMR11,Rx Individual Mask Register 11"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8AC++0x03
hide.long 0x00 "RXIMR11,Rx Individual Mask Register 11"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8B0++0x03
line.long 0x00 "RXIMR12,Rx Individual Mask Register 12"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8B0++0x03
hide.long 0x00 "RXIMR12,Rx Individual Mask Register 12"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8B4++0x03
line.long 0x00 "RXIMR13,Rx Individual Mask Register 13"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8B4++0x03
hide.long 0x00 "RXIMR13,Rx Individual Mask Register 13"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8B8++0x03
line.long 0x00 "RXIMR14,Rx Individual Mask Register 14"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8B8++0x03
hide.long 0x00 "RXIMR14,Rx Individual Mask Register 14"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8BC++0x03
line.long 0x00 "RXIMR15,Rx Individual Mask Register 15"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8BC++0x03
hide.long 0x00 "RXIMR15,Rx Individual Mask Register 15"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8C0++0x03
line.long 0x00 "RXIMR16,Rx Individual Mask Register 16"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8C0++0x03
hide.long 0x00 "RXIMR16,Rx Individual Mask Register 16"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8C4++0x03
line.long 0x00 "RXIMR17,Rx Individual Mask Register 17"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8C4++0x03
hide.long 0x00 "RXIMR17,Rx Individual Mask Register 17"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8C8++0x03
line.long 0x00 "RXIMR18,Rx Individual Mask Register 18"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8C8++0x03
hide.long 0x00 "RXIMR18,Rx Individual Mask Register 18"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8CC++0x03
line.long 0x00 "RXIMR19,Rx Individual Mask Register 19"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8CC++0x03
hide.long 0x00 "RXIMR19,Rx Individual Mask Register 19"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8D0++0x03
line.long 0x00 "RXIMR20,Rx Individual Mask Register 20"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8D0++0x03
hide.long 0x00 "RXIMR20,Rx Individual Mask Register 20"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8D4++0x03
line.long 0x00 "RXIMR21,Rx Individual Mask Register 21"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8D4++0x03
hide.long 0x00 "RXIMR21,Rx Individual Mask Register 21"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8D8++0x03
line.long 0x00 "RXIMR22,Rx Individual Mask Register 22"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8D8++0x03
hide.long 0x00 "RXIMR22,Rx Individual Mask Register 22"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8DC++0x03
line.long 0x00 "RXIMR23,Rx Individual Mask Register 23"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8DC++0x03
hide.long 0x00 "RXIMR23,Rx Individual Mask Register 23"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8E0++0x03
line.long 0x00 "RXIMR24,Rx Individual Mask Register 24"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8E0++0x03
hide.long 0x00 "RXIMR24,Rx Individual Mask Register 24"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8E4++0x03
line.long 0x00 "RXIMR25,Rx Individual Mask Register 25"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8E4++0x03
hide.long 0x00 "RXIMR25,Rx Individual Mask Register 25"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8E8++0x03
line.long 0x00 "RXIMR26,Rx Individual Mask Register 26"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8E8++0x03
hide.long 0x00 "RXIMR26,Rx Individual Mask Register 26"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8EC++0x03
line.long 0x00 "RXIMR27,Rx Individual Mask Register 27"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8EC++0x03
hide.long 0x00 "RXIMR27,Rx Individual Mask Register 27"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8F0++0x03
line.long 0x00 "RXIMR28,Rx Individual Mask Register 28"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8F0++0x03
hide.long 0x00 "RXIMR28,Rx Individual Mask Register 28"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8F4++0x03
line.long 0x00 "RXIMR29,Rx Individual Mask Register 29"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8F4++0x03
hide.long 0x00 "RXIMR29,Rx Individual Mask Register 29"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8F8++0x03
line.long 0x00 "RXIMR30,Rx Individual Mask Register 30"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8F8++0x03
hide.long 0x00 "RXIMR30,Rx Individual Mask Register 30"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x8FC++0x03
line.long 0x00 "RXIMR31,Rx Individual Mask Register 31"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x8FC++0x03
hide.long 0x00 "RXIMR31,Rx Individual Mask Register 31"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x900++0x03
line.long 0x00 "RXIMR32,Rx Individual Mask Register 32"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x900++0x03
hide.long 0x00 "RXIMR32,Rx Individual Mask Register 32"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x904++0x03
line.long 0x00 "RXIMR33,Rx Individual Mask Register 33"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x904++0x03
hide.long 0x00 "RXIMR33,Rx Individual Mask Register 33"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x908++0x03
line.long 0x00 "RXIMR34,Rx Individual Mask Register 34"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x908++0x03
hide.long 0x00 "RXIMR34,Rx Individual Mask Register 34"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x90C++0x03
line.long 0x00 "RXIMR35,Rx Individual Mask Register 35"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x90C++0x03
hide.long 0x00 "RXIMR35,Rx Individual Mask Register 35"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x910++0x03
line.long 0x00 "RXIMR36,Rx Individual Mask Register 36"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x910++0x03
hide.long 0x00 "RXIMR36,Rx Individual Mask Register 36"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x914++0x03
line.long 0x00 "RXIMR37,Rx Individual Mask Register 37"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x914++0x03
hide.long 0x00 "RXIMR37,Rx Individual Mask Register 37"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x918++0x03
line.long 0x00 "RXIMR38,Rx Individual Mask Register 38"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x918++0x03
hide.long 0x00 "RXIMR38,Rx Individual Mask Register 38"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x91C++0x03
line.long 0x00 "RXIMR39,Rx Individual Mask Register 39"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x91C++0x03
hide.long 0x00 "RXIMR39,Rx Individual Mask Register 39"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x920++0x03
line.long 0x00 "RXIMR40,Rx Individual Mask Register 40"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x920++0x03
hide.long 0x00 "RXIMR40,Rx Individual Mask Register 40"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x924++0x03
line.long 0x00 "RXIMR41,Rx Individual Mask Register 41"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x924++0x03
hide.long 0x00 "RXIMR41,Rx Individual Mask Register 41"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x928++0x03
line.long 0x00 "RXIMR42,Rx Individual Mask Register 42"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x928++0x03
hide.long 0x00 "RXIMR42,Rx Individual Mask Register 42"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x92C++0x03
line.long 0x00 "RXIMR43,Rx Individual Mask Register 43"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x92C++0x03
hide.long 0x00 "RXIMR43,Rx Individual Mask Register 43"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x930++0x03
line.long 0x00 "RXIMR44,Rx Individual Mask Register 44"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x930++0x03
hide.long 0x00 "RXIMR44,Rx Individual Mask Register 44"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x934++0x03
line.long 0x00 "RXIMR45,Rx Individual Mask Register 45"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x934++0x03
hide.long 0x00 "RXIMR45,Rx Individual Mask Register 45"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x938++0x03
line.long 0x00 "RXIMR46,Rx Individual Mask Register 46"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x938++0x03
hide.long 0x00 "RXIMR46,Rx Individual Mask Register 46"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x93C++0x03
line.long 0x00 "RXIMR47,Rx Individual Mask Register 47"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x93C++0x03
hide.long 0x00 "RXIMR47,Rx Individual Mask Register 47"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x940++0x03
line.long 0x00 "RXIMR48,Rx Individual Mask Register 48"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x940++0x03
hide.long 0x00 "RXIMR48,Rx Individual Mask Register 48"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x944++0x03
line.long 0x00 "RXIMR49,Rx Individual Mask Register 49"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x944++0x03
hide.long 0x00 "RXIMR49,Rx Individual Mask Register 49"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x948++0x03
line.long 0x00 "RXIMR50,Rx Individual Mask Register 50"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x948++0x03
hide.long 0x00 "RXIMR50,Rx Individual Mask Register 50"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x94C++0x03
line.long 0x00 "RXIMR51,Rx Individual Mask Register 51"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x94C++0x03
hide.long 0x00 "RXIMR51,Rx Individual Mask Register 51"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x950++0x03
line.long 0x00 "RXIMR52,Rx Individual Mask Register 52"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x950++0x03
hide.long 0x00 "RXIMR52,Rx Individual Mask Register 52"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x954++0x03
line.long 0x00 "RXIMR53,Rx Individual Mask Register 53"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x954++0x03
hide.long 0x00 "RXIMR53,Rx Individual Mask Register 53"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x958++0x03
line.long 0x00 "RXIMR54,Rx Individual Mask Register 54"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x958++0x03
hide.long 0x00 "RXIMR54,Rx Individual Mask Register 54"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x95C++0x03
line.long 0x00 "RXIMR55,Rx Individual Mask Register 55"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x95C++0x03
hide.long 0x00 "RXIMR55,Rx Individual Mask Register 55"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x960++0x03
line.long 0x00 "RXIMR56,Rx Individual Mask Register 56"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x960++0x03
hide.long 0x00 "RXIMR56,Rx Individual Mask Register 56"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x964++0x03
line.long 0x00 "RXIMR57,Rx Individual Mask Register 57"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x964++0x03
hide.long 0x00 "RXIMR57,Rx Individual Mask Register 57"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x968++0x03
line.long 0x00 "RXIMR58,Rx Individual Mask Register 58"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x968++0x03
hide.long 0x00 "RXIMR58,Rx Individual Mask Register 58"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x96C++0x03
line.long 0x00 "RXIMR59,Rx Individual Mask Register 59"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x96C++0x03
hide.long 0x00 "RXIMR59,Rx Individual Mask Register 59"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x970++0x03
line.long 0x00 "RXIMR60,Rx Individual Mask Register 60"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x970++0x03
hide.long 0x00 "RXIMR60,Rx Individual Mask Register 60"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x974++0x03
line.long 0x00 "RXIMR61,Rx Individual Mask Register 61"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x974++0x03
hide.long 0x00 "RXIMR61,Rx Individual Mask Register 61"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x978++0x03
line.long 0x00 "RXIMR62,Rx Individual Mask Register 62"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x978++0x03
hide.long 0x00 "RXIMR62,Rx Individual Mask Register 62"
endif
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0x97C++0x03
line.long 0x00 "RXIMR63,Rx Individual Mask Register 63"
bitfld.long 0x00 31. "MI[31],Individual mask bit 31" "Not masked,Masked"
bitfld.long 0x00 30. "[30],Individual mask bit 30" "Not masked,Masked"
bitfld.long 0x00 29. "[29],Individual mask bit 29" "Not masked,Masked"
newline
bitfld.long 0x00 28. "[28],Individual mask bit 28" "Not masked,Masked"
bitfld.long 0x00 27. "[27],Individual mask bit 27" "Not masked,Masked"
bitfld.long 0x00 26. "[26],Individual mask bit 26" "Not masked,Masked"
newline
bitfld.long 0x00 25. "[25],Individual mask bit 25" "Not masked,Masked"
bitfld.long 0x00 24. "[24],Individual mask bit 24" "Not masked,Masked"
bitfld.long 0x00 23. "[23],Individual mask bit 23" "Not masked,Masked"
newline
bitfld.long 0x00 22. "[22],Individual mask bit 22" "Not masked,Masked"
bitfld.long 0x00 21. "[21],Individual mask bit 21" "Not masked,Masked"
bitfld.long 0x00 20. "[20],Individual mask bit 20" "Not masked,Masked"
newline
bitfld.long 0x00 19. "[19],Individual mask bit 19" "Not masked,Masked"
bitfld.long 0x00 18. "[18],Individual mask bit 18" "Not masked,Masked"
bitfld.long 0x00 17. "[17],Individual mask bit 17" "Not masked,Masked"
newline
bitfld.long 0x00 16. "[16],Individual mask bit 16" "Not masked,Masked"
bitfld.long 0x00 15. "[15],Individual mask bit 15" "Not masked,Masked"
bitfld.long 0x00 14. "[14],Individual mask bit 14" "Not masked,Masked"
newline
bitfld.long 0x00 13. "[13],Individual mask bit 13" "Not masked,Masked"
bitfld.long 0x00 12. "[12],Individual mask bit 12" "Not masked,Masked"
bitfld.long 0x00 11. "[11],Individual mask bit 11" "Not masked,Masked"
newline
bitfld.long 0x00 10. "[10],Individual mask bit 10" "Not masked,Masked"
bitfld.long 0x00 9. "[9],Individual mask bit 9" "Not masked,Masked"
bitfld.long 0x00 8. "[8],Individual mask bit 8" "Not masked,Masked"
newline
bitfld.long 0x00 7. "[7],Individual mask bit 7" "Not masked,Masked"
bitfld.long 0x00 6. "[6],Individual mask bit 6" "Not masked,Masked"
bitfld.long 0x00 5. "[5],Individual mask bit 5" "Not masked,Masked"
newline
bitfld.long 0x00 4. "[4],Individual mask bit 4" "Not masked,Masked"
bitfld.long 0x00 3. "[3],Individual mask bit 3" "Not masked,Masked"
bitfld.long 0x00 2. "[2],Individual mask bit 2" "Not masked,Masked"
newline
bitfld.long 0x00 1. "[1],Individual mask bit 1" "Not masked,Masked"
bitfld.long 0x00 0. "[0],Individual mask bit 0" "Not masked,Masked"
else
hgroup.long 0x97C++0x03
hide.long 0x00 "RXIMR63,Rx Individual Mask Register 63"
endif
group.long 0xAE0++0x0F
line.long 0x00 "MECR,Memory Error Control Register"
bitfld.long 0x00 31. "ECRWRDIS,Error configuration register write disable" "No,Yes"
bitfld.long 0x00 19. "HANCEI_MSK,Host access with non-correctable errors interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 18. "FANCEI_MSK,FlexCAN access with non-correctable errors interrupt mask" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "CEI_MSK,Correctable errors interrupt mask" "Disabled,Enabled"
bitfld.long 0x00 15. "HAERRIE,Host access error injection enable" "Disabled,Enabled"
bitfld.long 0x00 14. "FAERRIE,FlexCAN access error injection enable" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "EXTERRIE,Extended error injection enable" "32-bit,64-bit"
bitfld.long 0x00 9. "RERRDIS,Error report disable" "No,Yes"
bitfld.long 0x00 8. "ECCDIS,Error correction disable" "No,Yes"
newline
bitfld.long 0x00 7. "NCEFAFRZ,Non-correctable errors in FlexCAN access put device in Freeze Mode" "No,Yes"
line.long 0x04 "ERRIAR,Error Injection Address Register"
hexmask.long 0x04 2.--31. 0x04 "INJADDR_H,Error injection address high"
bitfld.long 0x04 0.--1. "INJADDR_L,Error injection address low" "0,1,2,3"
line.long 0x08 "ERRIDPR,Error Injection Data Pattern Register"
line.long 0x0C "ERRIPPR,Error Injection Parity Pattern Register"
bitfld.long 0x0C 24.--28. "PFLIP3,Parity flip pattern for byte 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x0C 16.--20. "PFLIP2,Parity flip pattern for byte 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x0C 8.--12. "PFLIP1,Parity flip pattern for byte 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x0C 0.--4. "PFLIP0,Parity flip pattern for byte 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0xAF0++0x0B
line.long 0x00 "RERRAR,Error Report Address Register"
bitfld.long 0x00 24. "NCE,Indicates that the report is due to a non-correctable error" "Correctable,Non-correctable"
bitfld.long 0x00 18. "SAID[2],Identification of the requester of the memory read request" "FlexCAN internal,Host - CPU"
bitfld.long 0x00 17. "[1],Details of FlexCAN operation" "Move,Scanning"
newline
bitfld.long 0x00 16. "[0],Operation that requested the memory read" "Transmission,Reception"
hexmask.long.word 0x00 0.--13. 0x01 "ERRADDR,Address where error detected"
line.long 0x04 "RERRDR,Error Report Data Register"
line.long 0x08 "RERRSYNR,Error Report Syndrome Register"
bitfld.long 0x08 31. "BE3,Byte enabled for byte 3 (most significant)" "Not read,Read"
bitfld.long 0x08 24.--28. "SYND3,Error syndrome for byte 3 (most significant)" "0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F"
bitfld.long 0x08 23. "BE2,Byte enabled for byte 2" "Not read,Read"
newline
bitfld.long 0x08 16.--20. "SYND2,Error syndrome for byte 2" "0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F"
bitfld.long 0x08 15. "BE1,Byte enabled for byte 1" "Not read,Read"
bitfld.long 0x08 8.--12. "SYND1,Error syndrome for byte 1" "0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F"
newline
bitfld.long 0x08 7. "BE0,Byte enabled for byte 0 (least significant)" "Not read,Read"
bitfld.long 0x08 0.--4. "SYND0,Error syndrome for byte 0 (least significant)" "0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F"
group.long 0xAFC++0x2B
line.long 0x00 "ERRSR,Error Status Register"
eventfld.long 0x00 19. "HANCEIF,Host access with non-correctable error interrupt flag" "Not detected,Detected"
eventfld.long 0x00 18. "FANCEIF,FlexCAN access with non-correctable error interrupt flag" "Not detected,Detected"
eventfld.long 0x00 16. "CEIF,Correctable error interrupt flag" "Not detected,Detected"
newline
eventfld.long 0x00 3. "HANCEIOF,Host access with non-correctable error interrupt overrun flag" "No overrun,Overrun"
eventfld.long 0x00 2. "FANCEIOF,FlexCAN access with non-correctable error interrupt overrun flag" "No overrun,Overrun"
eventfld.long 0x00 0. "CEIOF,Correctable error interrupt overrun flag" "No overrun,Overrun"
line.long 0x04 "CTRL1_PN,Pretended Networking Control 1 Register"
bitfld.long 0x04 17. "WTOF_MSK,Wake up by timeout flag mask bit" "Disabled,Enabled"
bitfld.long 0x04 16. "WUMF_MSK,Wake up by match flag mask bit" "Disabled,Enabled"
hexmask.long.byte 0x04 8.--15. 0x10 "NMATCH,Number of messages matching the same filtering criteria"
newline
bitfld.long 0x04 4.--5. "PLFS,Payload filtering selection" "Exact value,Greater than/equal,Smaller than/equal,Inside range"
bitfld.long 0x04 2.--3. "IDFS,ID filtering selection" "Exact value,Greater than/equal,Smaller than/equal,Inside range"
bitfld.long 0x04 0.--1. "FCS,Filtering combination selection" "Message ID only,Message ID/payload,Message ID specified,Message ID/payload specified"
line.long 0x08 "CTRL2_PN,Pretended Networking Control 2 Register"
hexmask.long.word 0x08 0.--15. 1. "MATCHTO,Timeout for no message matching the filtering criteria"
line.long 0x0C "WU_MTC,Pretended Networking Wake Up Match Register"
eventfld.long 0x0C 17. "WTOF,Wake up by timeout flag bit" "Not detected,Detected"
eventfld.long 0x0C 16. "WUMF,Wake up by match flag bit" "Not detected,Detected"
rhexmask.long.byte 0x0C 8.--15. 0x10 "MCOUNTER,Number of matches when in pretended networking"
line.long 0x10 "FLT_ID1,Pretended Networking ID Filter 1 Register"
bitfld.long 0x10 30. "FLT_IDE,ID extended filter" "Disabled,Enabled"
bitfld.long 0x10 29. "FLT_RTR,Remote transmission request filter" "Reject,Accept"
hexmask.long 0x10 0.--28. 1. "FLT_ID1,ID filter 1 for pretended networking filtering"
line.long 0x14 "FLT_DLC,Pretended Networking DLC Filter Register"
bitfld.long 0x14 16.--19. "FLT_DLC_LO,Lower limit for length of data bytes filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x14 0.--3. "FLT_DLC_HI,Upper limit for length of data bytes filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "PL1_LO,Pretended Networking Payload Low Filter 1 Register"
hexmask.long.byte 0x18 24.--31. 1. "DATA_B0,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 0"
hexmask.long.byte 0x18 16.--23. 1. "DATA_B1,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 1"
hexmask.long.byte 0x18 8.--15. 1. "DATA_B2,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 2"
newline
hexmask.long.byte 0x18 0.--7. 1. "DATA_B3,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 3"
line.long 0x1C "PL1_LO,Pretended Networking Payload Low Filter 1 Register"
hexmask.long.byte 0x1C 24.--31. 1. "DATA_B4,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 4"
hexmask.long.byte 0x1C 16.--23. 1. "DATA_B5,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 5"
hexmask.long.byte 0x1C 8.--15. 1. "DATA_B6,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 6"
newline
hexmask.long.byte 0x1C 0.--7. 1. "DATA_B7,Payload Filter 1 low order bits for Pretended Networking payload filtering corresponding to data byte 7"
line.long 0x20 "FLT_ID2_IDMASK,Pretended Networking ID Filter 2 Register / ID Mask Register"
bitfld.long 0x20 30. "IDE_MSK,Indicates whether the frame format (standard/extended) is used as part of the ID reception filter" "Don't care,Checked"
bitfld.long 0x20 29. "RTR_MSK,Indicates whether the frame type (data/remote) is part of the ID reception filter" "Don't care,Checked"
hexmask.long 0x20 0.--28. 1. "FLT_ID2_IDMA_SK,ID filter 2 for pretended networking filtering/ID mask bits for pretended networking ID filtering"
line.long 0x24 "PL2_PLMASK_LO,Pretended Networking Payload Low Filter 2 Register / Payload Low Mask Register"
hexmask.long.byte 0x24 24.--31. 1. "DATA_BYTE_0,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 0"
hexmask.long.byte 0x24 16.--23. 1. "DATA_BYTE_1,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 1"
hexmask.long.byte 0x24 8.--15. 1. "DATA_BYTE_2,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 2"
newline
hexmask.long.byte 0x24 0.--7. 1. "DATA_BYTE_3,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 3"
line.long 0x28 "PL2_PLMASK_HI,Pretended Networking Payload High Filter 2 / Payload High Mask Register"
hexmask.long.byte 0x28 24.--31. 1. "DATA_BYTE_4,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 4"
hexmask.long.byte 0x28 16.--23. 1. "DATA_BYTE_5,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 5"
hexmask.long.byte 0x28 8.--15. 1. "DATA_BYTE_6,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 6"
newline
hexmask.long.byte 0x28 0.--7. 1. "DATA_BYTE_7,Payload Filter 2 low order bits/payload mask low order bits for Pretended Networking payload filtering corresponding to the data byte 7"
repeat 4. (increment 0xB40 0x10)(increment 0 1)
rgroup.long $1++0x0F
line.long 0x00 "WMB$1_CS,Wake Up Message Buffer register for C/S"
bitfld.long 0x00 22. "SRR,Substitute remote request" "Recessive,Dominant"
bitfld.long 0x00 21. "IDE,Identifies whether the frame format is standard or extended" "Standard,Extended"
bitfld.long 0x00 20. "RTR,Identifies whether the frame is remote or not" "Not remote,Remote"
newline
bitfld.long 0x00 16.--19. "DLC,Length of data in bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "WMB$1_ID,Wake Up Message Buffer Register for ID"
hexmask.long 0x04 0.--28. 1. "ID,Received ID under Pretended Networking mode"
line.long 0x08 "WMB$1_D03,Wake Up Message Buffer Register for Data 0-3"
hexmask.long.byte 0x08 24.--31. 1. "DATA_BYTE_0,Received payload corresponding to the data byte 0 under Pretended Networking mode"
hexmask.long.byte 0x08 16.--23. 1. "DATA_BYTE_1,Received payload corresponding to the data byte 1 under Pretended Networking mode"
hexmask.long.byte 0x08 8.--15. 1. "DATA_BYTE_2,Received payload corresponding to the data byte 2 under Pretended Networking mode"
newline
hexmask.long.byte 0x08 0.--7. 1. "DATA_BYTE_3,Received payload corresponding to the data byte 3 under Pretended Networking mode"
line.long 0x0C "WMB$1_D47,Wake Up Message Buffer Register for Data 0-3"
hexmask.long.byte 0x0C 24.--31. 1. "DATA_BYTE_4,Received payload corresponding to the data byte 4 under Pretended Networking mode"
hexmask.long.byte 0x0C 16.--23. 1. "DATA_BYTE_5,Received payload corresponding to the data byte 5 under Pretended Networking mode"
hexmask.long.byte 0x0C 8.--15. 1. "DATA_BYTE_6,Received payload corresponding to the data byte 6 under Pretended Networking mode"
newline
hexmask.long.byte 0x0C 0.--7. 1. "DATA_BYTE_7,Received payload corresponding to the data byte 7 under Pretended Networking mode"
repeat.end
if (((per.l((ad:0x02190000))&0x40000000)==0x40000000))
group.long 0xC00++0x07
line.long 0x00 "FDCTRL,CAN FD Control Register"
bitfld.long 0x00 31. "FDRATE,Bit rate switch enable" "Nominal,Switching"
bitfld.long 0x00 19.--20. "MBDSR1,Message buffer data size for Region 1" "8 B,16 B,32 B,64 B"
bitfld.long 0x00 16.--17. "MBDSR0,Message buffer data size for Region 0" "8 B,16 B,32 B,64 B"
newline
bitfld.long 0x00 15. "TDCEN,Transceiver delay compensation enable" "Disabled,Enabled"
eventfld.long 0x00 14. "TDCFAIL,Transceiver delay compensation fail" "In range,Out of range"
bitfld.long 0x00 8.--12. "TDCOFF,Transceiver delay compensation offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver delay compensation value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "FDCBT,CAN FD Bit Timing Register"
hexmask.long.word 0x04 20.--29. 0x10 "FPRESDIV,Fast prescaler division factor"
bitfld.long 0x04 16.--17. "FRJW,Fast resync jump width" "0,1,2,3"
bitfld.long 0x04 10.--14. "FPROPSEG,Fast propagation segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x04 5.--7. "FPSEG1,Fast phase segment 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "FPSEG2,Fast phase segment 2" "0,1,2,3,4,5,6,7"
else
group.long 0xC00++0x07
line.long 0x00 "FDCTRL,CAN FD Control Register"
bitfld.long 0x00 31. "FDRATE,Bit rate switch enable" "Nominal,Switching"
bitfld.long 0x00 19.--20. "MBDSR1,Message buffer data size for Region 1" "8 B,16 B,32 B,64 B"
bitfld.long 0x00 16.--17. "MBDSR0,Message buffer data size for Region 0" "8 B,16 B,32 B,64 B"
newline
bitfld.long 0x00 15. "TDCEN,Transceiver delay compensation enable" "Disabled,Enabled"
eventfld.long 0x00 14. "TDCFAIL,Transceiver delay compensation fail" "In range,Out of range"
rbitfld.long 0x00 8.--12. "TDCOFF,Transceiver delay compensation offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--5. "TDCVAL,Transceiver delay compensation value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "FDCBT,CAN FD Bit Timing Register"
hexmask.long.word 0x04 20.--29. 0x10 "FPRESDIV,Fast prescaler division factor"
rbitfld.long 0x04 16.--17. "FRJW,Fast resync jump width" "0,1,2,3"
rbitfld.long 0x04 10.--14. "FPROPSEG,Fast Propagation Segment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
rbitfld.long 0x04 5.--7. "FPSEG1,Fast phase segment 1" "0,1,2,3,4,5,6,7"
rbitfld.long 0x04 0.--2. "FPSEG2,Fast phase segment 2" "0,1,2,3,4,5,6,7"
endif
rgroup.long 0xC04++0x03
line.long 0x00 "FDCRC,CAN FD CRC Register"
hexmask.long.byte 0x00 24.--30. 0x01 "FD_MBCRC,CRC mailbox number for FD_TXCRC"
hexmask.long.tbyte 0x00 0.--20. 1. "FD_TXCRC,Extended transmitted CRC value"
tree.end
tree.end
tree "FlexSPI (Flexible Serial Peripheral Interface)"
base ad:0x020C0000
if (((per.l(ad:0x020C0000))&0x02)==0x02)
group.long 0x00++0x03
line.long 0x00 "MCR0,Module Control Register 0"
hexmask.long.byte 0x00 24.--31. 1. "AHBGRANTWAIT,Timeout wait cycle for AHB command grant"
hexmask.long.byte 0x00 16.--23. 1. "IPGRANTWAIT,Time out wait cycle for IP command grant"
newline
bitfld.long 0x00 15. "LEARNEN,Data learning feature enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SCKFREERUNEN,Force SCK output free-running" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "COMBINATIONEN,Flash octal mode access by combining Port A and B Data pins" "Disabled,Enabled"
bitfld.long 0x00 12. "DOZEEN,Doze mode enable" "Disabled,Enabled"
newline
rbitfld.long 0x00 11. "HSEN,Half speed serial flash access enable" "Disabled,Enabled"
bitfld.long 0x00 8.--10. "SERCLKDIV,The serial root clock could be divided inside FlexSPI" "/1,/2,/3,/4,/5,/6,/7,/8"
newline
bitfld.long 0x00 7. "ATDFEN,Enable AHB bus write access to IP Tx FIFO" "Disabled,Enabled"
bitfld.long 0x00 6. "ARDFEN,Enable AHB bus read access to IP Rx FIFO" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--5. "RXCLKSRC,Sample clock source selection for flash reading" "FlexSPI/internal loopback,FlexSPI/DQS pad loopback,,Flash/DQS pad loopback"
bitfld.long 0x00 1. "MDIS,Module disable" "No,Yes"
newline
bitfld.long 0x00 0. "SWRESET,Software reset" "Not reset,Reset"
else
group.long 0x00++0x03
line.long 0x00 "MCR0,Module Control Register 0"
hexmask.long.byte 0x00 24.--31. 1. "AHBGRANTWAIT,Timeout wait cycle for AHB command grant"
hexmask.long.byte 0x00 16.--23. 1. "IPGRANTWAIT,Time out wait cycle for IP command grant"
newline
bitfld.long 0x00 15. "LEARNEN,Data learning feature enable" "Disabled,Enabled"
bitfld.long 0x00 14. "SCKFREERUNEN,Force SCK output free-running" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "COMBINATIONEN,Flash octal mode access by combining Port A and B Data pins" "Disabled,Enabled"
bitfld.long 0x00 12. "DOZEEN,Doze mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "HSEN,Half speed serial flash access enable" "Disabled,Enabled"
bitfld.long 0x00 8.--10. "SERCLKDIV,The serial root clock could be divided inside FlexSPI" "/1,/2,/3,/4,/5,/6,/7,/8"
newline
bitfld.long 0x00 7. "ATDFEN,Enable AHB bus write access to IP Tx FIFO" "Disabled,Enabled"
bitfld.long 0x00 6. "ARDFEN,Enable AHB bus read access to IP Rx FIFO" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--5. "RXCLKSRC,Sample clock source selection for flash reading" "FlexSPI/internal loopback,FlexSPI/DQS pad loopback,,Flash/DQS pad loopback"
bitfld.long 0x00 1. "MDIS,Module disable" "No,Yes"
newline
bitfld.long 0x00 0. "SWRESET,Software reset" "Not reset,Reset"
endif
group.long 0x04++0x1B
line.long 0x00 "MCR1,Module Control Register 1"
hexmask.long.word 0x00 16.--31. 1. "SEQWAIT,Command sequence execution timeout value"
hexmask.long.word 0x00 0.--15. 1. "AHBBUSWAIT,AHB Read/Write access to serial flash memory space timeout value"
line.long 0x04 "MCR2,Module Control Register 2"
hexmask.long.byte 0x04 24.--31. 1. "RESUMEWAIT,Wait cycle for idle state before suspended command sequence resumed"
bitfld.long 0x04 19. "SCKBDIFFOPT,Use SCKB pad as SCKA differential clock output" "Not used,Used"
newline
bitfld.long 0x04 15. "SAMEDEVICEEN,All external devices are same devices" "Disabled,Enabled"
bitfld.long 0x04 14. "CLRLEARNPHASE,The sampling clock phase selection reset" "No reset,Reset"
newline
bitfld.long 0x04 11. "CLRAHBBUFOPT,Determines whether AHB RX Buffer and AHB TX Buffer is cleaned automaticaly" "Not cleaned,Cleaned"
line.long 0x08 "AHBCR,AHB Bus Control Register"
bitfld.long 0x08 6. "READADDROPT,AHB read address option bit" "Alignment limitation,No alignment limitation"
bitfld.long 0x08 5. "PREFETCHEN,AHB read prefetch enable" "Disabled,Enabled"
newline
bitfld.long 0x08 4. "BUFFERABLEEN,Enable AHB bus bufferable write access support" "Disabled,Enabled"
bitfld.long 0x08 3. "CACHABLEEN,Enable AHB bus cachable read access support" "Disabled,Enabled"
newline
bitfld.long 0x08 0. "APAREN,Parallel mode enabled for AHB triggered command" "Individual,Parallel"
line.long 0x0C "INTEN,Interrupt Enable Register"
bitfld.long 0x0C 11. "SEQTIMEOUTEN,Sequence execution timeout interrupt enable" "Disabled,Enabled"
bitfld.long 0x0C 10. "AHBBUSTIMEOUTEN,AHB Bus timeout interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 9. "SCKSTOPBYWREN,SCK is stopped during command sequence because async TX FIFO empty interrupt enable" "Disabled,Enabled"
bitfld.long 0x0C 8. "SCKSTOPBYRDEN,SCK is stopped during command sequence because async RX FIFO full interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 7. "DATALEARNFAILEN,Data learning failed interrupt enable" "Disabled,Enabled"
bitfld.long 0x0C 6. "IPTXWEEN,IP TX FIFO watermark empty interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 5. "IPRXWAEN,IP RX FIFO watermark available interrupt enable" "Disabled,Enabled"
bitfld.long 0x0C 4. "AHBCMDERREN,AHB triggered command sequences error detected interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 3. "IPCMDERREN,IP triggered command sequences error detected interrupt enable" "Disabled,Enabled"
bitfld.long 0x0C 2. "AHBCMDGEEN,AHB triggered command sequences grant timeout interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 1. "IPCMDGEEN,IP triggered command sequences grant timeout interrupt enable" "Disabled,Enabled"
bitfld.long 0x0C 0. "IPCMDDONEEN,IP triggered command sequences execution finished interrupt enable" "Disabled,Enabled"
line.long 0x10 "INTR,Interrupt Register"
eventfld.long 0x10 11. "SEQTIMEOUT,Sequence execution timeout interrupt" "Not occurred,Occurred"
eventfld.long 0x10 10. "AHBBUSTIMEOUT,AHB bus timeout interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x10 9. "SCKSTOPBYWR,SCLK is stopped during command sequence because async TX FIFO empty interrupt" "Not occurred,Occurred"
eventfld.long 0x10 8. "SCKSTOPBYRD,SCLK is stopped during command sequence because async RX FIFO full interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x10 7. "DATALEARNFAIL,Data learning failed interrupt" "Not occurred,Occurred"
eventfld.long 0x10 6. "IPTXWE,IP TX FIFO watermark empty interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x10 5. "IPRXWA,IP RX FIFO watermark available interrupt" "Not occurred,Occurred"
eventfld.long 0x10 4. "AHBCMDERR,AHB triggered command sequences error detected interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x10 3. "IPCMDERR,IP triggered command sequences error detected interrupt" "Not occurred,Occurred"
eventfld.long 0x10 2. "AHBCMDGE,AHB triggered command sequences grant timeout interrupt" "Not occurred,Occurred"
newline
eventfld.long 0x10 1. "IPCMDGE,IP triggered command sequences grant timeout interrupt" "Not occurred,Occurred"
eventfld.long 0x10 0. "IPCMDDONE,IP triggered command sequences execution finished interrupt" "Not occurred,Occurred"
line.long 0x14 "LUTKEY,LUT Key Register"
line.long 0x18 "LUTCR,LUT Control Register"
bitfld.long 0x18 1. "UNLOCK,Unlock LUT" "Locked,Unlocked"
bitfld.long 0x18 0. "LOCK,Lock LUT" "Unlocked,Locked"
repeat 8. (increment 0x20 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "AHBRXBUF$2CR0,AHB Rx Buffer $2 Control Register 0"
bitfld.long 0x00 31. "PREFETCHEN,AHB read prefetch enable for current AHB RX Buffer corresponding master" "Disabled,Enabled"
bitfld.long 0x00 24.--26. "PRIORITY,AHB master read priority" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--19. "MSTRID,ID of AHB master associated with this buffer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.word 0x00 0.--8. 1. "BUFSZ,AHB RX buffer size in 64 bit"
repeat.end
repeat 4. (increment 0x60 0x04)(strings "A1" "A2" "B1" "B2")
group.long $1++0x03
line.long 0x00 "FLSH$2CR0,Flash Control Register 0"
hexmask.long.tbyte 0x00 0.--22. 1. "FLSHSZ,Flash size in KByte"
repeat.end
repeat 4. (increment 0x70 0x04)(strings "A1" "A2" "B1" "B2")
group.long $1++0x03
line.long 0x00 "FLSH$2CR1,Flash Control Register 1"
hexmask.long.word 0x00 16.--31. 1. "CSINTERVAL,Used to set the minimum interval between flash device Chip selection deassertion and flash device Chip selection assertion"
bitfld.long 0x00 15. "CSINTERVALUNIT,CS interval unit" "1,256"
newline
bitfld.long 0x00 11.--14. "CAS,Column Address Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 10. "WA,Word Addressable" "Disabled,Enabled"
newline
bitfld.long 0x00 5.--9. "TCSH,Serial flash CS hold time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "TCSS,Serial flash CS setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
repeat 4. (increment 0x80 0x04)(strings "A1" "A2" "B1" "B2")
group.long $1++0x03
line.long 0x00 "FLSH$2CR2,Flash Control Register 2"
bitfld.long 0x00 31. "CLRINSTRPTR,Clear the instruction pointer" "Not cleared,Cleared"
bitfld.long 0x00 28.--30. "AWRWAITUNIT,AWRWAIT unit" "2 ahb clock cycle,8 ahb clock cycle,32 ahb clock cycle,128 ahb clock cycle,512 ahb clock cycle,2048 ahb clock cycle,8192 ahb clock cycle,32768 ahb clock cycle"
newline
hexmask.long.word 0x00 16.--27. 1. "AWRWAIT,Time to write data into internal memory"
bitfld.long 0x00 13.--15. "AWRSEQNUM,Sequence Number for AHB Write triggered Command" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8.--12. "AWRSEQID,Sequence index for AHB write triggered command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 5.--7. "ARDSEQNUM,Sequence number for AHB read triggered command in LUT" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--4. "ARDSEQID,Sequence index for AHB read triggered command in LUT" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
repeat.end
group.long 0x94++0x03
line.long 0x00 "FLSHCR4,Flash Control Register 4"
bitfld.long 0x00 3. "WMENB,Write mask enable bit for flash device on port B" "Disabled,Enabled"
bitfld.long 0x00 2. "WMENA,Write mask enable bit for flash device on port A" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "WMOPT1,Write mask option bit 1" "Yes,No"
group.long 0xA0++0x07
line.long 0x00 "IPCR0,IP Control Register 0"
line.long 0x04 "IPCR1,IP Control Register 1"
bitfld.long 0x04 31. "IPAREN,Parallel mode enabled for IP command" "Disabled,Enabled"
bitfld.long 0x04 24.--26. "ISEQNUM,Sequence number for IP command" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 16.--20. "ISEQID,Sequence index in LUT for IP command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
hexmask.long.word 0x04 0.--15. 1. "IDATSZ,Flash read/program data size (in bytes) for IP command"
group.long 0xB0++0x0F
line.long 0x00 "IPCMD,IP Command Register"
bitfld.long 0x00 0. "TRG,IP command trigger" "Not triggered,Triggered"
line.long 0x04 "DLPR,Data Learn Pattern Register"
line.long 0x08 "IPRXFCR,IP RX FIFO Control Register"
hexmask.long.word 0x08 2.--8. 1. "RXWMRK,Watermark level"
bitfld.long 0x08 1. "RXDMAEN,IP RX FIFO reading by DMA enabled" "Processor,DMA"
newline
bitfld.long 0x08 0. "CLRIPRXF,Clear all valid data entries in IP RX FIFO" "Not cleared,Cleared"
line.long 0x0C "IPTXFCR,IP TX FIFO Control Register"
hexmask.long.word 0x0C 2.--8. 1. "TXWMRK,Watermark level"
bitfld.long 0x0C 1. "TXDMAEN,IP TX FIFO filling by DMA enabled" "Processor,DMA"
newline
bitfld.long 0x0C 0. "CLRIPTXF,Clear all valid data entries in IP TX FIFO" "Not cleared,Cleared"
repeat 2. (increment 0xC0 0x04)(strings "A" "B")
group.long $1++0x03
line.long 0x00 "DLL$2CR,DLL$2 Control 0"
bitfld.long 0x00 9.--14. "OVRDVAL,Slave clock delay line delay cell number selection override value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 8. "OVRDEN,Slave clock delay line delay cell number selection override enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3.--6. "SLVDLYTARGET,The delay target for slave delay line" "1/32,2/32,3/32,4/32,5/32,6/32,7/32,8/32,9/32,10/32,11/32,12/32,13/32,14/32,15/32,16/32"
bitfld.long 0x00 1. "DLLRESET,DDL reset" "No reset,Reset"
newline
bitfld.long 0x00 0. "DLLEN,DLL calibration enable" "Disabled,Enabled"
repeat.end
rgroup.long 0xE0++0x17
line.long 0x00 "STS0,Status Register 0"
bitfld.long 0x00 8.--11. "DATALEARNPHASEB,Sampling clock phase selection on Port B after data learning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 4.--7. "DATALEARNPHASEA,Sampling clock phase selection on Port A after data learning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 2.--3. "ARBCMDSRC,Trigger source of current command sequence granted by arbitrator" "AHB Read,AHB Write,IP,Suspended"
bitfld.long 0x00 1. "ARBIDLE,State machine in ARB_CTL" "Busy,Idle"
newline
bitfld.long 0x00 0. "SEQIDLE,State machine in SEQ_CTL" "Busy,Idle"
line.long 0x04 "STS1,Status Register 1"
bitfld.long 0x04 24.--27. "IPCMDERRCODE,IP command error code" "No error,,JMP_ON_CS used with IP command,Unknown opcode,SDR used in DDR,DDR used in SDR,Start address exceed whole flash address range,,,,,,,,Sequence execution timeout,Flash boundary crossed"
bitfld.long 0x04 16.--20. "IPCMDERRID,Sequence index when IP command error detected" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x04 8.--11. "AHBCMDERRCODE,AHB command error code" "No error,,JMP_ON_CS used with AHB write command,Unknown opcode,SDR used in DDR,DDR used in SDR,,,,,,,,,Execution timeout,?..."
bitfld.long 0x04 0.--4. "AHBCMDERRID,Sequence index when an AHB command error is detected" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x08 "STS2,Status Register 2"
bitfld.long 0x08 24.--29. "BREFSEL,Flash B sample clock reference delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x08 18.--23. "BSLVSEL,Flash B sample clock slave delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x08 17. "BREFLOCK,Flash B sample clock reference delay line locked" "Not locked,Locked"
bitfld.long 0x08 16. "BSLVLOCK,Flash B sample clock slave delay line locked" "Not locked,Locked"
newline
bitfld.long 0x08 8.--13. "AREFSEL,Flash A sample clock reference delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x08 2.--7. "ASLVSEL,Flash A sample clock slave delay line delay cell number selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x08 1. "AREFLOCK,Flash A sample clock reference delay line locked" "Not locked,Locked"
bitfld.long 0x08 0. "ASLVLOCK,Flash A sample clock slave delay line locked" "Not locked,Locked"
line.long 0x0C "AHBSPNDSTS,AHB Suspend Status Register"
hexmask.long.word 0x0C 16.--31. 1. "DATLFT,Left Data size for suspended command sequence"
bitfld.long 0x0C 1.--3. "BUFID,AHB RX BUF ID for suspended command sequence" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x0C 0. "ACTIVE,Indicates if an AHB read prefetch command sequence has been suspended" "Not suspended,Suspended"
line.long 0x10 "IPRXFSTS,IP RX FIFO Status Register"
hexmask.long.word 0x10 16.--31. 1. "RDCNTR,Total Read Data Counter"
hexmask.long.byte 0x10 0.--7. 1. "FILL,Fill level of IP RX FIFO"
line.long 0x14 "IPTXFSTS,IP TX FIFO Status Register"
hexmask.long.word 0x14 16.--31. 1. "WRCNTR,Total Write Data Counter"
hexmask.long.byte 0x14 0.--7. 1. "FILL,Fill level of IP TX FIFO"
tree "RFDR Registers"
repeat 32. (increment 0x100 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "RFDR$2,IP Rx FIFO Data Register $2"
repeat.end
tree.end
tree "TFDR Registers"
repeat 32. (increment 0x180 0x04)(increment 0. 1.)
wgroup.long $1++0x03
line.long 0x00 "TFDR$2,IP Tx FIFO Data Register $2"
repeat.end
tree.end
tree "LUT Registers"
repeat 128. (increment 0x200 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "LUT$2,LUT $2 Register"
bitfld.long 0x00 26.--31. "OPCODE1,OPCODE 1" "STOP,CMD_SDR,RADDR_SDR,CADDR_SDR,MODE1_SDR,MODE2_SDR,MODE4_SDR,MODE8_SDR,WRITE_SDR,READ_SDR,LEARN_SDR,DATSZ_SDR,DUMMY_SDR,DUMMY_RWDS_SDR,,,,,,,,,,,,,,,,,,JMP_ON_CS,,CMD_DDR,RADDR_DDR,CADDR_DDR,MODE1_DDR,MODE2_DDR,MODE4_DDR,MODE8_DDR,WRITE_DDR,READ_DDR,LEARN_DDR,DATSZ_DDR,DUMMY_DDR,DUMMY_RWDS_DDR,?..."
bitfld.long 0x00 24.--25. "NUM_PADS1,NUM_PADS 1" "Single mode,Dual mode,Quad mode,Octal mode"
hexmask.long.byte 0x00 16.--23. 1. "OPERAND1,OPERAND 1"
bitfld.long 0x00 10.--15. "OPCODE0,OPCODE" "STOP,CMD_SDR,RADDR_SDR,CADDR_SDR,MODE1_SDR,MODE2_SDR,MODE4_SDR,MODE8_SDR,WRITE_SDR,READ_SDR,LEARN_SDR,DATSZ_SDR,DUMMY_SDR,DUMMY_RWDS_SDR,,,,,,,,,,,,,,,,,,JMP_ON_CS,,CMD_DDR,RADDR_DDR,CADDR_DDR,MODE1_DDR,MODE2_DDR,MODE4_DDR,MODE8_DDR,WRITE_DDR,READ_DDR,LEARN_DDR,DATSZ_DDR,DUMMY_DDR,DUMMY_RWDS_DDR,?..."
bitfld.long 0x00 8.--9. "NUM_PADS0,NUM_PADS 0" "Single mode,Dual mode,Quad mode,Octal mode"
hexmask.long.byte 0x00 0.--7. 1. "OPERAND0,OPERAND 0"
repeat.end
tree.end
tree.end
tree "FTM (FlexTimer Module)"
tree "FlexTimer 1"
base ad:0x2800000
if (((per.l(ad:0x2800000+0x54))&0x04)==0x04)
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
bitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
bitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
else
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
rbitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
rbitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
endif
group.long 0x04++0x07
line.long 0x00 "CNT,Counter Register"
hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value"
line.long 0x04 "MOD,Modulo Register"
hexmask.long.word 0x04 0.--15. 1. "MOD,Modulo value"
repeat 8. (increment 0x0C 0x08)(increment 0. 1.)
if (((per.l(ad:0x2800000+0x54))&0x04)==0x04)
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
bitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
bitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
bitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
else
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
rbitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
rbitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
rbitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
endif
group.long ($1+0x04)++0x03
line.long 0x00 "C$2V,Channel ($2) Value Register"
hexmask.long.word 0x00 0.--15. 1. "VAL,Channel value"
repeat.end
group.long 0x4C++0x03
line.long 0x00 "CNTIN,Counter Initial Value Register"
hexmask.long.word 0x00 0.--15. 1. "INIT,Initial value of the FTM counter"
rgroup.long 0x50++0x03
line.long 0x00 "STATUS,Capture and Compare Status Register"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "Not occurred,Occurred"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "Not occurred,Occurred"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "Not occurred,Occurred"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "Not occurred,Occurred"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "Not occurred,Occurred"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "Not occurred,Occurred"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "Not occurred,Occurred"
if (((per.l(ad:0x2800000+0x54))&0x04)==0x04)
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
bitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
bitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
else
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
rbitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
rbitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
endif
group.long 0x58++0x0B
line.long 0x00 "SYNC,Synchronization Register"
bitfld.long 0x00 7. "SWSYNC,PWM synchronization software trigger" "Not selected,Selected"
bitfld.long 0x00 6. "TRIG2,PWM synchronization hardware trigger 2" "Disabled,Enabled"
bitfld.long 0x00 5. "TRIG1,PWM synchronization hardware trigger 1" "Disabled,Enabled"
bitfld.long 0x00 4. "TRIG0,PWM synchronization hardware trigger 0" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "SYNCHOM,Output mask synchronization" "Rising edges,PWM"
bitfld.long 0x00 2. "REINIT,FTM counter reinitialization by synchronization" "Not reinitialized,Reinitialized"
bitfld.long 0x00 1. "CNTMAX,Maximum loading point enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CNTMIN,Minimum loading point enable" "Disabled,Enabled"
line.long 0x04 "OUTINIT,Initial State for Channels Output Register"
bitfld.long 0x04 7. "CH7OI,Channel 7 output initialization value" "0,1"
bitfld.long 0x04 6. "CH6OI,Channel 6 output initialization value" "0,1"
bitfld.long 0x04 5. "CH5OI,Channel 5 output initialization value" "0,1"
bitfld.long 0x04 4. "CH4OI,Channel 4 output initialization value" "0,1"
newline
bitfld.long 0x04 3. "CH3OI,Channel 3 output initialization value" "0,1"
bitfld.long 0x04 2. "CH2OI,Channel 2 output initialization value" "0,1"
bitfld.long 0x04 1. "CH1OI,Channel 1 output initialization value" "0,1"
bitfld.long 0x04 0. "CH0OI,Channel 0 output initialization value" "0,1"
line.long 0x08 "OUTMASK,Output Mask Register"
bitfld.long 0x08 7. "CH7OM,Channel 7 output mask" "Not masked,Masked"
bitfld.long 0x08 6. "CH6OM,Channel 6 output mask" "Not masked,Masked"
bitfld.long 0x08 5. "CH5OM,Channel 5 output mask" "Not masked,Masked"
bitfld.long 0x08 4. "CH4OM,Channel 4 output mask" "Not masked,Masked"
newline
bitfld.long 0x08 3. "CH3OM,Channel 3 output mask" "Not masked,Masked"
bitfld.long 0x08 2. "CH2OM,Channel 2 output mask" "Not masked,Masked"
bitfld.long 0x08 1. "CH1OM,Channel 1 output mask" "Not masked,Masked"
bitfld.long 0x08 0. "CH0OM,Channel 0 output mask" "Not masked,Masked"
if (((per.l(ad:0x2800000+0x54))&0x04)==0x04)
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
bitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
bitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
bitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
bitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
bitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
bitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
bitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
bitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
bitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
bitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
bitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
bitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
bitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
bitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
else
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
rbitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
rbitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
rbitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
rbitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
rbitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
rbitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
rbitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
rbitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
rbitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
rbitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
rbitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
rbitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
rbitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
rbitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
rbitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
rbitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
endif
if (((per.l(ad:0x2800000+0x54))&0x04)==0x04)
group.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
else
rgroup.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.long 0x6C++0x03
line.long 0x00 "EXTTRIG,FTM External Trigger Register"
rbitfld.long 0x00 7. "TRIGF,Channel trigger flag" "Not triggered,Triggered"
bitfld.long 0x00 6. "INITTRIGEN,Initialization trigger enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CH1TRIG,Channel 1 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CH0TRIG,Channel 0 trigger enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CH5TRIG,Channel 5 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CH4TRIG,Channel 4 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 1. "CH3TRIG,Channel 3 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CH2TRIG,Channel 2 trigger enable" "Disabled,Enabled"
if (((per.l(ad:0x2800000+0x54))&0x04)==0x04)
group.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
else
rgroup.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
endif
group.long 0x74++0x07
line.long 0x00 "FMS,Fault Mode Status"
bitfld.long 0x00 6. "WPEN,Write protection enable" "Disabled,Enabled"
line.long 0x04 "FILTER,Input Capture Filter Control Register"
bitfld.long 0x04 12.--15. "CH3FVAL,Channel 3 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "CH2FVAL,Channel 2 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "CH1FVAL,Channel 1 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "CH0FVAL,Channel 0 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x84++0x03
line.long 0x00 "CONF,Configuration Register"
bitfld.long 0x00 10. "GTBEOUT,Enables global time base signal generation to other FTMs" "Disabled,Enabled"
bitfld.long 0x00 9. "GTBEEN,Configures FTM to use external global time base signal that is generated by another FTM" "Disabled,Enabled"
bitfld.long 0x00 6.--7. "BDMMODE,Selects the FTM behavior in BDM mode" "0,1,2,3"
bitfld.long 0x00 0.--4. "NUMTOF,Selects the ratio between the number of counter overflows to the number of times the TOF bit is set" "Each,Not for next 1,Not for next 2,Not for next 3,Not for next 4,Not for next 5,Not for next 6,Not for next 7,Not for next 8,Not for next 9,Not for next 10,Not for next 11,Not for next 12,Not for next 13,Not for next 14,Not for next 15,Not for next 16,Not for next 17,Not for next 18,Not for next 19,Not for next 20,Not for next 21,Not for next 22,Not for next 23,Not for next 24,Not for next 25,Not for next 26,Not for next 27,Not for next 28,Not for next 29,Not for next 30,Not for next 31"
group.long 0x8C++0x0F
line.long 0x00 "SYNCONF,Synchronization Configuration Register"
bitfld.long 0x00 20. "HWSOC,Software output control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 19. "HWINVC,Inverting control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 18. "HWOM,Output mask synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 17. "HWWRBUF,MOD CNTIN and CV registers synchronization is activated by a hardware trigger" "Not activated,Activated"
newline
bitfld.long 0x00 16. "HWRSTCNT,FTM counter synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 12. "SWSOC,Software output control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 11. "SWINVC,Inverting control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 10. "SWOM,Output mask synchronization is activated by the software trigger" "Not activated,Activated"
newline
bitfld.long 0x00 9. "SWWRBUF,MOD CNTIN and CV registers synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 8. "SWRSTCNT,FTM counter synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 7. "SYNCMODE,Selects the PWM synchronization mode" "Legacy PWM,Enhanced PWM"
bitfld.long 0x00 5. "SWOC,SWOCTRL register synchronization" "All rising edges,PWM synchronization"
newline
bitfld.long 0x00 4. "INVC,INVCTRL register synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 2. "CNTINC,CNTIN Register Synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 0. "HWTRIGMODE,Hardware trigger mode" "Cleared,Not cleared"
line.long 0x04 "INVCTRL,FTM Inverting Control Register"
bitfld.long 0x04 3. "INV3EN,Pair channels 3 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 2. "INV2EN,Pair channels 2 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 1. "INV1EN,Pair channels 1 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 0. "INV0EN,Pair channels 0 inverting enable" "Disabled,Enabled"
line.long 0x08 "SWOCTRL,FTM Software Output Control Register"
bitfld.long 0x08 15. "CH7OCV,Channel 7 software output control value" "0 forced,1 forced"
bitfld.long 0x08 14. "CH6OCV,Channel 6 software output control value" "0 forced,1 forced"
bitfld.long 0x08 13. "CH5OCV,Channel 5 software output control value" "0 forced,1 forced"
bitfld.long 0x08 12. "CH4OCV,Channel 4 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 11. "CH3OCV,Channel 3 software output control value" "0 forced,1 forced"
bitfld.long 0x08 10. "CH2OCV,Channel 2 software output control value" "0 forced,1 forced"
bitfld.long 0x08 9. "CH1OCV,Channel 1 software output control value" "0 forced,1 forced"
bitfld.long 0x08 8. "CH0OCV,Channel 0 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 7. "CH7OC,Channel 7 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 6. "CH6OC,Channel 6 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 5. "CH5OC,Channel 5 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 4. "CH4OC,Channel 4 software output control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "CH3OC,Channel 3 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 2. "CH2OC,Channel 2 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "CH1OC,Channel 1 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 0. "CH0OC,Channel 0 software output control enable" "Disabled,Enabled"
line.long 0x0C "PWMLOAD,FTM PWM Load Register"
bitfld.long 0x0C 9. "LDOK,Load enable" "Disabled,Enabled"
bitfld.long 0x0C 7. "CH7SEL,Includes channel 7 in matching process" "Not included,Included"
bitfld.long 0x0C 6. "CH6SEL,Includes channel 6 in matching process" "Not included,Included"
bitfld.long 0x0C 5. "CH5SEL,Includes channel 5 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 4. "CH4SEL,Includes channel 4 in matching process" "Not included,Included"
bitfld.long 0x0C 3. "CH3SEL,Includes channel 3 in matching process" "Not included,Included"
bitfld.long 0x0C 2. "CH2SEL,Includes channel 2 in matching process" "Not included,Included"
bitfld.long 0x0C 1. "CH1SEL,Includes channel 1 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 0. "CH0SEL,Includes channel 0 in matching process" "Not included,Included"
tree.end
tree "FlexTimer 2"
base ad:0x2810000
if (((per.l(ad:0x2810000+0x54))&0x04)==0x04)
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
bitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
bitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
else
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
rbitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
rbitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
endif
group.long 0x04++0x07
line.long 0x00 "CNT,Counter Register"
hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value"
line.long 0x04 "MOD,Modulo Register"
hexmask.long.word 0x04 0.--15. 1. "MOD,Modulo value"
repeat 8. (increment 0x0C 0x08)(increment 0. 1.)
if (((per.l(ad:0x2810000+0x54))&0x04)==0x04)
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
bitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
bitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
bitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
else
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
rbitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
rbitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
rbitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
endif
group.long ($1+0x04)++0x03
line.long 0x00 "C$2V,Channel ($2) Value Register"
hexmask.long.word 0x00 0.--15. 1. "VAL,Channel value"
repeat.end
group.long 0x4C++0x03
line.long 0x00 "CNTIN,Counter Initial Value Register"
hexmask.long.word 0x00 0.--15. 1. "INIT,Initial value of the FTM counter"
rgroup.long 0x50++0x03
line.long 0x00 "STATUS,Capture and Compare Status Register"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "Not occurred,Occurred"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "Not occurred,Occurred"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "Not occurred,Occurred"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "Not occurred,Occurred"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "Not occurred,Occurred"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "Not occurred,Occurred"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "Not occurred,Occurred"
if (((per.l(ad:0x2810000+0x54))&0x04)==0x04)
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
bitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
bitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
else
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
rbitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
rbitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
endif
group.long 0x58++0x0B
line.long 0x00 "SYNC,Synchronization Register"
bitfld.long 0x00 7. "SWSYNC,PWM synchronization software trigger" "Not selected,Selected"
bitfld.long 0x00 6. "TRIG2,PWM synchronization hardware trigger 2" "Disabled,Enabled"
bitfld.long 0x00 5. "TRIG1,PWM synchronization hardware trigger 1" "Disabled,Enabled"
bitfld.long 0x00 4. "TRIG0,PWM synchronization hardware trigger 0" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "SYNCHOM,Output mask synchronization" "Rising edges,PWM"
bitfld.long 0x00 2. "REINIT,FTM counter reinitialization by synchronization" "Not reinitialized,Reinitialized"
bitfld.long 0x00 1. "CNTMAX,Maximum loading point enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CNTMIN,Minimum loading point enable" "Disabled,Enabled"
line.long 0x04 "OUTINIT,Initial State for Channels Output Register"
bitfld.long 0x04 7. "CH7OI,Channel 7 output initialization value" "0,1"
bitfld.long 0x04 6. "CH6OI,Channel 6 output initialization value" "0,1"
bitfld.long 0x04 5. "CH5OI,Channel 5 output initialization value" "0,1"
bitfld.long 0x04 4. "CH4OI,Channel 4 output initialization value" "0,1"
newline
bitfld.long 0x04 3. "CH3OI,Channel 3 output initialization value" "0,1"
bitfld.long 0x04 2. "CH2OI,Channel 2 output initialization value" "0,1"
bitfld.long 0x04 1. "CH1OI,Channel 1 output initialization value" "0,1"
bitfld.long 0x04 0. "CH0OI,Channel 0 output initialization value" "0,1"
line.long 0x08 "OUTMASK,Output Mask Register"
bitfld.long 0x08 7. "CH7OM,Channel 7 output mask" "Not masked,Masked"
bitfld.long 0x08 6. "CH6OM,Channel 6 output mask" "Not masked,Masked"
bitfld.long 0x08 5. "CH5OM,Channel 5 output mask" "Not masked,Masked"
bitfld.long 0x08 4. "CH4OM,Channel 4 output mask" "Not masked,Masked"
newline
bitfld.long 0x08 3. "CH3OM,Channel 3 output mask" "Not masked,Masked"
bitfld.long 0x08 2. "CH2OM,Channel 2 output mask" "Not masked,Masked"
bitfld.long 0x08 1. "CH1OM,Channel 1 output mask" "Not masked,Masked"
bitfld.long 0x08 0. "CH0OM,Channel 0 output mask" "Not masked,Masked"
if (((per.l(ad:0x2810000+0x54))&0x04)==0x04)
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
bitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
bitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
bitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
bitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
bitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
bitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
bitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
bitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
bitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
bitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
bitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
bitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
bitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
bitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
else
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
rbitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
rbitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
rbitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
rbitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
rbitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
rbitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
rbitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
rbitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
rbitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
rbitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
rbitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
rbitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
rbitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
rbitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
rbitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
rbitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
endif
if (((per.l(ad:0x2810000+0x54))&0x04)==0x04)
group.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
else
rgroup.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.long 0x6C++0x03
line.long 0x00 "EXTTRIG,FTM External Trigger Register"
rbitfld.long 0x00 7. "TRIGF,Channel trigger flag" "Not triggered,Triggered"
bitfld.long 0x00 6. "INITTRIGEN,Initialization trigger enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CH1TRIG,Channel 1 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CH0TRIG,Channel 0 trigger enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CH5TRIG,Channel 5 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CH4TRIG,Channel 4 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 1. "CH3TRIG,Channel 3 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CH2TRIG,Channel 2 trigger enable" "Disabled,Enabled"
if (((per.l(ad:0x2810000+0x54))&0x04)==0x04)
group.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
else
rgroup.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
endif
group.long 0x74++0x07
line.long 0x00 "FMS,Fault Mode Status"
bitfld.long 0x00 6. "WPEN,Write protection enable" "Disabled,Enabled"
line.long 0x04 "FILTER,Input Capture Filter Control Register"
bitfld.long 0x04 12.--15. "CH3FVAL,Channel 3 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "CH2FVAL,Channel 2 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "CH1FVAL,Channel 1 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "CH0FVAL,Channel 0 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x84++0x03
line.long 0x00 "CONF,Configuration Register"
bitfld.long 0x00 10. "GTBEOUT,Enables global time base signal generation to other FTMs" "Disabled,Enabled"
bitfld.long 0x00 9. "GTBEEN,Configures FTM to use external global time base signal that is generated by another FTM" "Disabled,Enabled"
bitfld.long 0x00 6.--7. "BDMMODE,Selects the FTM behavior in BDM mode" "0,1,2,3"
bitfld.long 0x00 0.--4. "NUMTOF,Selects the ratio between the number of counter overflows to the number of times the TOF bit is set" "Each,Not for next 1,Not for next 2,Not for next 3,Not for next 4,Not for next 5,Not for next 6,Not for next 7,Not for next 8,Not for next 9,Not for next 10,Not for next 11,Not for next 12,Not for next 13,Not for next 14,Not for next 15,Not for next 16,Not for next 17,Not for next 18,Not for next 19,Not for next 20,Not for next 21,Not for next 22,Not for next 23,Not for next 24,Not for next 25,Not for next 26,Not for next 27,Not for next 28,Not for next 29,Not for next 30,Not for next 31"
group.long 0x8C++0x0F
line.long 0x00 "SYNCONF,Synchronization Configuration Register"
bitfld.long 0x00 20. "HWSOC,Software output control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 19. "HWINVC,Inverting control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 18. "HWOM,Output mask synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 17. "HWWRBUF,MOD CNTIN and CV registers synchronization is activated by a hardware trigger" "Not activated,Activated"
newline
bitfld.long 0x00 16. "HWRSTCNT,FTM counter synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 12. "SWSOC,Software output control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 11. "SWINVC,Inverting control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 10. "SWOM,Output mask synchronization is activated by the software trigger" "Not activated,Activated"
newline
bitfld.long 0x00 9. "SWWRBUF,MOD CNTIN and CV registers synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 8. "SWRSTCNT,FTM counter synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 7. "SYNCMODE,Selects the PWM synchronization mode" "Legacy PWM,Enhanced PWM"
bitfld.long 0x00 5. "SWOC,SWOCTRL register synchronization" "All rising edges,PWM synchronization"
newline
bitfld.long 0x00 4. "INVC,INVCTRL register synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 2. "CNTINC,CNTIN Register Synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 0. "HWTRIGMODE,Hardware trigger mode" "Cleared,Not cleared"
line.long 0x04 "INVCTRL,FTM Inverting Control Register"
bitfld.long 0x04 3. "INV3EN,Pair channels 3 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 2. "INV2EN,Pair channels 2 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 1. "INV1EN,Pair channels 1 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 0. "INV0EN,Pair channels 0 inverting enable" "Disabled,Enabled"
line.long 0x08 "SWOCTRL,FTM Software Output Control Register"
bitfld.long 0x08 15. "CH7OCV,Channel 7 software output control value" "0 forced,1 forced"
bitfld.long 0x08 14. "CH6OCV,Channel 6 software output control value" "0 forced,1 forced"
bitfld.long 0x08 13. "CH5OCV,Channel 5 software output control value" "0 forced,1 forced"
bitfld.long 0x08 12. "CH4OCV,Channel 4 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 11. "CH3OCV,Channel 3 software output control value" "0 forced,1 forced"
bitfld.long 0x08 10. "CH2OCV,Channel 2 software output control value" "0 forced,1 forced"
bitfld.long 0x08 9. "CH1OCV,Channel 1 software output control value" "0 forced,1 forced"
bitfld.long 0x08 8. "CH0OCV,Channel 0 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 7. "CH7OC,Channel 7 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 6. "CH6OC,Channel 6 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 5. "CH5OC,Channel 5 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 4. "CH4OC,Channel 4 software output control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "CH3OC,Channel 3 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 2. "CH2OC,Channel 2 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "CH1OC,Channel 1 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 0. "CH0OC,Channel 0 software output control enable" "Disabled,Enabled"
line.long 0x0C "PWMLOAD,FTM PWM Load Register"
bitfld.long 0x0C 9. "LDOK,Load enable" "Disabled,Enabled"
bitfld.long 0x0C 7. "CH7SEL,Includes channel 7 in matching process" "Not included,Included"
bitfld.long 0x0C 6. "CH6SEL,Includes channel 6 in matching process" "Not included,Included"
bitfld.long 0x0C 5. "CH5SEL,Includes channel 5 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 4. "CH4SEL,Includes channel 4 in matching process" "Not included,Included"
bitfld.long 0x0C 3. "CH3SEL,Includes channel 3 in matching process" "Not included,Included"
bitfld.long 0x0C 2. "CH2SEL,Includes channel 2 in matching process" "Not included,Included"
bitfld.long 0x0C 1. "CH1SEL,Includes channel 1 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 0. "CH0SEL,Includes channel 0 in matching process" "Not included,Included"
tree.end
tree "FlexTimer 3"
base ad:0x2820000
if (((per.l(ad:0x2820000+0x54))&0x04)==0x04)
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
bitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
bitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
else
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
rbitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
rbitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
endif
group.long 0x04++0x07
line.long 0x00 "CNT,Counter Register"
hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value"
line.long 0x04 "MOD,Modulo Register"
hexmask.long.word 0x04 0.--15. 1. "MOD,Modulo value"
repeat 8. (increment 0x0C 0x08)(increment 0. 1.)
if (((per.l(ad:0x2820000+0x54))&0x04)==0x04)
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
bitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
bitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
bitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
else
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
rbitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
rbitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
rbitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
endif
group.long ($1+0x04)++0x03
line.long 0x00 "C$2V,Channel ($2) Value Register"
hexmask.long.word 0x00 0.--15. 1. "VAL,Channel value"
repeat.end
group.long 0x4C++0x03
line.long 0x00 "CNTIN,Counter Initial Value Register"
hexmask.long.word 0x00 0.--15. 1. "INIT,Initial value of the FTM counter"
rgroup.long 0x50++0x03
line.long 0x00 "STATUS,Capture and Compare Status Register"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "Not occurred,Occurred"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "Not occurred,Occurred"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "Not occurred,Occurred"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "Not occurred,Occurred"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "Not occurred,Occurred"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "Not occurred,Occurred"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "Not occurred,Occurred"
if (((per.l(ad:0x2820000+0x54))&0x04)==0x04)
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
bitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
bitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
else
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
rbitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
rbitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
endif
group.long 0x58++0x0B
line.long 0x00 "SYNC,Synchronization Register"
bitfld.long 0x00 7. "SWSYNC,PWM synchronization software trigger" "Not selected,Selected"
bitfld.long 0x00 6. "TRIG2,PWM synchronization hardware trigger 2" "Disabled,Enabled"
bitfld.long 0x00 5. "TRIG1,PWM synchronization hardware trigger 1" "Disabled,Enabled"
bitfld.long 0x00 4. "TRIG0,PWM synchronization hardware trigger 0" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "SYNCHOM,Output mask synchronization" "Rising edges,PWM"
bitfld.long 0x00 2. "REINIT,FTM counter reinitialization by synchronization" "Not reinitialized,Reinitialized"
bitfld.long 0x00 1. "CNTMAX,Maximum loading point enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CNTMIN,Minimum loading point enable" "Disabled,Enabled"
line.long 0x04 "OUTINIT,Initial State for Channels Output Register"
bitfld.long 0x04 7. "CH7OI,Channel 7 output initialization value" "0,1"
bitfld.long 0x04 6. "CH6OI,Channel 6 output initialization value" "0,1"
bitfld.long 0x04 5. "CH5OI,Channel 5 output initialization value" "0,1"
bitfld.long 0x04 4. "CH4OI,Channel 4 output initialization value" "0,1"
newline
bitfld.long 0x04 3. "CH3OI,Channel 3 output initialization value" "0,1"
bitfld.long 0x04 2. "CH2OI,Channel 2 output initialization value" "0,1"
bitfld.long 0x04 1. "CH1OI,Channel 1 output initialization value" "0,1"
bitfld.long 0x04 0. "CH0OI,Channel 0 output initialization value" "0,1"
line.long 0x08 "OUTMASK,Output Mask Register"
bitfld.long 0x08 7. "CH7OM,Channel 7 output mask" "Not masked,Masked"
bitfld.long 0x08 6. "CH6OM,Channel 6 output mask" "Not masked,Masked"
bitfld.long 0x08 5. "CH5OM,Channel 5 output mask" "Not masked,Masked"
bitfld.long 0x08 4. "CH4OM,Channel 4 output mask" "Not masked,Masked"
newline
bitfld.long 0x08 3. "CH3OM,Channel 3 output mask" "Not masked,Masked"
bitfld.long 0x08 2. "CH2OM,Channel 2 output mask" "Not masked,Masked"
bitfld.long 0x08 1. "CH1OM,Channel 1 output mask" "Not masked,Masked"
bitfld.long 0x08 0. "CH0OM,Channel 0 output mask" "Not masked,Masked"
if (((per.l(ad:0x2820000+0x54))&0x04)==0x04)
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
bitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
bitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
bitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
bitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
bitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
bitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
bitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
bitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
bitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
bitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
bitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
bitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
bitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
bitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
else
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
rbitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
rbitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
rbitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
rbitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
rbitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
rbitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
rbitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
rbitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
rbitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
rbitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
rbitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
rbitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
rbitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
rbitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
rbitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
rbitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
endif
if (((per.l(ad:0x2820000+0x54))&0x04)==0x04)
group.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
else
rgroup.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.long 0x6C++0x03
line.long 0x00 "EXTTRIG,FTM External Trigger Register"
rbitfld.long 0x00 7. "TRIGF,Channel trigger flag" "Not triggered,Triggered"
bitfld.long 0x00 6. "INITTRIGEN,Initialization trigger enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CH1TRIG,Channel 1 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CH0TRIG,Channel 0 trigger enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CH5TRIG,Channel 5 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CH4TRIG,Channel 4 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 1. "CH3TRIG,Channel 3 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CH2TRIG,Channel 2 trigger enable" "Disabled,Enabled"
if (((per.l(ad:0x2820000+0x54))&0x04)==0x04)
group.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
else
rgroup.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
endif
group.long 0x74++0x07
line.long 0x00 "FMS,Fault Mode Status"
bitfld.long 0x00 6. "WPEN,Write protection enable" "Disabled,Enabled"
line.long 0x04 "FILTER,Input Capture Filter Control Register"
bitfld.long 0x04 12.--15. "CH3FVAL,Channel 3 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "CH2FVAL,Channel 2 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "CH1FVAL,Channel 1 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "CH0FVAL,Channel 0 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x84++0x03
line.long 0x00 "CONF,Configuration Register"
bitfld.long 0x00 10. "GTBEOUT,Enables global time base signal generation to other FTMs" "Disabled,Enabled"
bitfld.long 0x00 9. "GTBEEN,Configures FTM to use external global time base signal that is generated by another FTM" "Disabled,Enabled"
bitfld.long 0x00 6.--7. "BDMMODE,Selects the FTM behavior in BDM mode" "0,1,2,3"
bitfld.long 0x00 0.--4. "NUMTOF,Selects the ratio between the number of counter overflows to the number of times the TOF bit is set" "Each,Not for next 1,Not for next 2,Not for next 3,Not for next 4,Not for next 5,Not for next 6,Not for next 7,Not for next 8,Not for next 9,Not for next 10,Not for next 11,Not for next 12,Not for next 13,Not for next 14,Not for next 15,Not for next 16,Not for next 17,Not for next 18,Not for next 19,Not for next 20,Not for next 21,Not for next 22,Not for next 23,Not for next 24,Not for next 25,Not for next 26,Not for next 27,Not for next 28,Not for next 29,Not for next 30,Not for next 31"
group.long 0x8C++0x0F
line.long 0x00 "SYNCONF,Synchronization Configuration Register"
bitfld.long 0x00 20. "HWSOC,Software output control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 19. "HWINVC,Inverting control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 18. "HWOM,Output mask synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 17. "HWWRBUF,MOD CNTIN and CV registers synchronization is activated by a hardware trigger" "Not activated,Activated"
newline
bitfld.long 0x00 16. "HWRSTCNT,FTM counter synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 12. "SWSOC,Software output control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 11. "SWINVC,Inverting control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 10. "SWOM,Output mask synchronization is activated by the software trigger" "Not activated,Activated"
newline
bitfld.long 0x00 9. "SWWRBUF,MOD CNTIN and CV registers synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 8. "SWRSTCNT,FTM counter synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 7. "SYNCMODE,Selects the PWM synchronization mode" "Legacy PWM,Enhanced PWM"
bitfld.long 0x00 5. "SWOC,SWOCTRL register synchronization" "All rising edges,PWM synchronization"
newline
bitfld.long 0x00 4. "INVC,INVCTRL register synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 2. "CNTINC,CNTIN Register Synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 0. "HWTRIGMODE,Hardware trigger mode" "Cleared,Not cleared"
line.long 0x04 "INVCTRL,FTM Inverting Control Register"
bitfld.long 0x04 3. "INV3EN,Pair channels 3 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 2. "INV2EN,Pair channels 2 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 1. "INV1EN,Pair channels 1 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 0. "INV0EN,Pair channels 0 inverting enable" "Disabled,Enabled"
line.long 0x08 "SWOCTRL,FTM Software Output Control Register"
bitfld.long 0x08 15. "CH7OCV,Channel 7 software output control value" "0 forced,1 forced"
bitfld.long 0x08 14. "CH6OCV,Channel 6 software output control value" "0 forced,1 forced"
bitfld.long 0x08 13. "CH5OCV,Channel 5 software output control value" "0 forced,1 forced"
bitfld.long 0x08 12. "CH4OCV,Channel 4 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 11. "CH3OCV,Channel 3 software output control value" "0 forced,1 forced"
bitfld.long 0x08 10. "CH2OCV,Channel 2 software output control value" "0 forced,1 forced"
bitfld.long 0x08 9. "CH1OCV,Channel 1 software output control value" "0 forced,1 forced"
bitfld.long 0x08 8. "CH0OCV,Channel 0 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 7. "CH7OC,Channel 7 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 6. "CH6OC,Channel 6 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 5. "CH5OC,Channel 5 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 4. "CH4OC,Channel 4 software output control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "CH3OC,Channel 3 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 2. "CH2OC,Channel 2 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "CH1OC,Channel 1 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 0. "CH0OC,Channel 0 software output control enable" "Disabled,Enabled"
line.long 0x0C "PWMLOAD,FTM PWM Load Register"
bitfld.long 0x0C 9. "LDOK,Load enable" "Disabled,Enabled"
bitfld.long 0x0C 7. "CH7SEL,Includes channel 7 in matching process" "Not included,Included"
bitfld.long 0x0C 6. "CH6SEL,Includes channel 6 in matching process" "Not included,Included"
bitfld.long 0x0C 5. "CH5SEL,Includes channel 5 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 4. "CH4SEL,Includes channel 4 in matching process" "Not included,Included"
bitfld.long 0x0C 3. "CH3SEL,Includes channel 3 in matching process" "Not included,Included"
bitfld.long 0x0C 2. "CH2SEL,Includes channel 2 in matching process" "Not included,Included"
bitfld.long 0x0C 1. "CH1SEL,Includes channel 1 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 0. "CH0SEL,Includes channel 0 in matching process" "Not included,Included"
tree.end
tree "FlexTimer 4"
base ad:0x2830000
if (((per.l(ad:0x2830000+0x54))&0x04)==0x04)
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
bitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
bitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
else
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
rbitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
rbitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
endif
group.long 0x04++0x07
line.long 0x00 "CNT,Counter Register"
hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value"
line.long 0x04 "MOD,Modulo Register"
hexmask.long.word 0x04 0.--15. 1. "MOD,Modulo value"
repeat 8. (increment 0x0C 0x08)(increment 0. 1.)
if (((per.l(ad:0x2830000+0x54))&0x04)==0x04)
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
bitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
bitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
bitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
else
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
rbitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
rbitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
rbitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
endif
group.long ($1+0x04)++0x03
line.long 0x00 "C$2V,Channel ($2) Value Register"
hexmask.long.word 0x00 0.--15. 1. "VAL,Channel value"
repeat.end
group.long 0x4C++0x03
line.long 0x00 "CNTIN,Counter Initial Value Register"
hexmask.long.word 0x00 0.--15. 1. "INIT,Initial value of the FTM counter"
rgroup.long 0x50++0x03
line.long 0x00 "STATUS,Capture and Compare Status Register"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "Not occurred,Occurred"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "Not occurred,Occurred"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "Not occurred,Occurred"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "Not occurred,Occurred"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "Not occurred,Occurred"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "Not occurred,Occurred"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "Not occurred,Occurred"
if (((per.l(ad:0x2830000+0x54))&0x04)==0x04)
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
bitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
bitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
else
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
rbitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
rbitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
endif
group.long 0x58++0x0B
line.long 0x00 "SYNC,Synchronization Register"
bitfld.long 0x00 7. "SWSYNC,PWM synchronization software trigger" "Not selected,Selected"
bitfld.long 0x00 6. "TRIG2,PWM synchronization hardware trigger 2" "Disabled,Enabled"
bitfld.long 0x00 5. "TRIG1,PWM synchronization hardware trigger 1" "Disabled,Enabled"
bitfld.long 0x00 4. "TRIG0,PWM synchronization hardware trigger 0" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "SYNCHOM,Output mask synchronization" "Rising edges,PWM"
bitfld.long 0x00 2. "REINIT,FTM counter reinitialization by synchronization" "Not reinitialized,Reinitialized"
bitfld.long 0x00 1. "CNTMAX,Maximum loading point enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CNTMIN,Minimum loading point enable" "Disabled,Enabled"
line.long 0x04 "OUTINIT,Initial State for Channels Output Register"
bitfld.long 0x04 7. "CH7OI,Channel 7 output initialization value" "0,1"
bitfld.long 0x04 6. "CH6OI,Channel 6 output initialization value" "0,1"
bitfld.long 0x04 5. "CH5OI,Channel 5 output initialization value" "0,1"
bitfld.long 0x04 4. "CH4OI,Channel 4 output initialization value" "0,1"
newline
bitfld.long 0x04 3. "CH3OI,Channel 3 output initialization value" "0,1"
bitfld.long 0x04 2. "CH2OI,Channel 2 output initialization value" "0,1"
bitfld.long 0x04 1. "CH1OI,Channel 1 output initialization value" "0,1"
bitfld.long 0x04 0. "CH0OI,Channel 0 output initialization value" "0,1"
line.long 0x08 "OUTMASK,Output Mask Register"
bitfld.long 0x08 7. "CH7OM,Channel 7 output mask" "Not masked,Masked"
bitfld.long 0x08 6. "CH6OM,Channel 6 output mask" "Not masked,Masked"
bitfld.long 0x08 5. "CH5OM,Channel 5 output mask" "Not masked,Masked"
bitfld.long 0x08 4. "CH4OM,Channel 4 output mask" "Not masked,Masked"
newline
bitfld.long 0x08 3. "CH3OM,Channel 3 output mask" "Not masked,Masked"
bitfld.long 0x08 2. "CH2OM,Channel 2 output mask" "Not masked,Masked"
bitfld.long 0x08 1. "CH1OM,Channel 1 output mask" "Not masked,Masked"
bitfld.long 0x08 0. "CH0OM,Channel 0 output mask" "Not masked,Masked"
if (((per.l(ad:0x2830000+0x54))&0x04)==0x04)
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
bitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
bitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
bitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
bitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
bitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
bitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
bitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
bitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
bitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
bitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
bitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
bitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
bitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
bitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
else
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
rbitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
rbitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
rbitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
rbitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
rbitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
rbitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
rbitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
rbitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
rbitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
rbitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
rbitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
rbitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
rbitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
rbitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
rbitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
rbitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
endif
if (((per.l(ad:0x2830000+0x54))&0x04)==0x04)
group.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
else
rgroup.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.long 0x6C++0x03
line.long 0x00 "EXTTRIG,FTM External Trigger Register"
rbitfld.long 0x00 7. "TRIGF,Channel trigger flag" "Not triggered,Triggered"
bitfld.long 0x00 6. "INITTRIGEN,Initialization trigger enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CH1TRIG,Channel 1 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CH0TRIG,Channel 0 trigger enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CH5TRIG,Channel 5 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CH4TRIG,Channel 4 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 1. "CH3TRIG,Channel 3 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CH2TRIG,Channel 2 trigger enable" "Disabled,Enabled"
if (((per.l(ad:0x2830000+0x54))&0x04)==0x04)
group.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
else
rgroup.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
endif
group.long 0x74++0x07
line.long 0x00 "FMS,Fault Mode Status"
bitfld.long 0x00 6. "WPEN,Write protection enable" "Disabled,Enabled"
line.long 0x04 "FILTER,Input Capture Filter Control Register"
bitfld.long 0x04 12.--15. "CH3FVAL,Channel 3 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "CH2FVAL,Channel 2 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "CH1FVAL,Channel 1 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "CH0FVAL,Channel 0 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x84++0x03
line.long 0x00 "CONF,Configuration Register"
bitfld.long 0x00 10. "GTBEOUT,Enables global time base signal generation to other FTMs" "Disabled,Enabled"
bitfld.long 0x00 9. "GTBEEN,Configures FTM to use external global time base signal that is generated by another FTM" "Disabled,Enabled"
bitfld.long 0x00 6.--7. "BDMMODE,Selects the FTM behavior in BDM mode" "0,1,2,3"
bitfld.long 0x00 0.--4. "NUMTOF,Selects the ratio between the number of counter overflows to the number of times the TOF bit is set" "Each,Not for next 1,Not for next 2,Not for next 3,Not for next 4,Not for next 5,Not for next 6,Not for next 7,Not for next 8,Not for next 9,Not for next 10,Not for next 11,Not for next 12,Not for next 13,Not for next 14,Not for next 15,Not for next 16,Not for next 17,Not for next 18,Not for next 19,Not for next 20,Not for next 21,Not for next 22,Not for next 23,Not for next 24,Not for next 25,Not for next 26,Not for next 27,Not for next 28,Not for next 29,Not for next 30,Not for next 31"
group.long 0x8C++0x0F
line.long 0x00 "SYNCONF,Synchronization Configuration Register"
bitfld.long 0x00 20. "HWSOC,Software output control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 19. "HWINVC,Inverting control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 18. "HWOM,Output mask synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 17. "HWWRBUF,MOD CNTIN and CV registers synchronization is activated by a hardware trigger" "Not activated,Activated"
newline
bitfld.long 0x00 16. "HWRSTCNT,FTM counter synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 12. "SWSOC,Software output control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 11. "SWINVC,Inverting control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 10. "SWOM,Output mask synchronization is activated by the software trigger" "Not activated,Activated"
newline
bitfld.long 0x00 9. "SWWRBUF,MOD CNTIN and CV registers synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 8. "SWRSTCNT,FTM counter synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 7. "SYNCMODE,Selects the PWM synchronization mode" "Legacy PWM,Enhanced PWM"
bitfld.long 0x00 5. "SWOC,SWOCTRL register synchronization" "All rising edges,PWM synchronization"
newline
bitfld.long 0x00 4. "INVC,INVCTRL register synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 2. "CNTINC,CNTIN Register Synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 0. "HWTRIGMODE,Hardware trigger mode" "Cleared,Not cleared"
line.long 0x04 "INVCTRL,FTM Inverting Control Register"
bitfld.long 0x04 3. "INV3EN,Pair channels 3 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 2. "INV2EN,Pair channels 2 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 1. "INV1EN,Pair channels 1 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 0. "INV0EN,Pair channels 0 inverting enable" "Disabled,Enabled"
line.long 0x08 "SWOCTRL,FTM Software Output Control Register"
bitfld.long 0x08 15. "CH7OCV,Channel 7 software output control value" "0 forced,1 forced"
bitfld.long 0x08 14. "CH6OCV,Channel 6 software output control value" "0 forced,1 forced"
bitfld.long 0x08 13. "CH5OCV,Channel 5 software output control value" "0 forced,1 forced"
bitfld.long 0x08 12. "CH4OCV,Channel 4 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 11. "CH3OCV,Channel 3 software output control value" "0 forced,1 forced"
bitfld.long 0x08 10. "CH2OCV,Channel 2 software output control value" "0 forced,1 forced"
bitfld.long 0x08 9. "CH1OCV,Channel 1 software output control value" "0 forced,1 forced"
bitfld.long 0x08 8. "CH0OCV,Channel 0 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 7. "CH7OC,Channel 7 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 6. "CH6OC,Channel 6 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 5. "CH5OC,Channel 5 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 4. "CH4OC,Channel 4 software output control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "CH3OC,Channel 3 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 2. "CH2OC,Channel 2 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "CH1OC,Channel 1 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 0. "CH0OC,Channel 0 software output control enable" "Disabled,Enabled"
line.long 0x0C "PWMLOAD,FTM PWM Load Register"
bitfld.long 0x0C 9. "LDOK,Load enable" "Disabled,Enabled"
bitfld.long 0x0C 7. "CH7SEL,Includes channel 7 in matching process" "Not included,Included"
bitfld.long 0x0C 6. "CH6SEL,Includes channel 6 in matching process" "Not included,Included"
bitfld.long 0x0C 5. "CH5SEL,Includes channel 5 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 4. "CH4SEL,Includes channel 4 in matching process" "Not included,Included"
bitfld.long 0x0C 3. "CH3SEL,Includes channel 3 in matching process" "Not included,Included"
bitfld.long 0x0C 2. "CH2SEL,Includes channel 2 in matching process" "Not included,Included"
bitfld.long 0x0C 1. "CH1SEL,Includes channel 1 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 0. "CH0SEL,Includes channel 0 in matching process" "Not included,Included"
tree.end
tree "FlexTimer 5"
base ad:0x2840000
if (((per.l(ad:0x2840000+0x54))&0x04)==0x04)
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
bitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
bitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
else
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
rbitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
rbitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
endif
group.long 0x04++0x07
line.long 0x00 "CNT,Counter Register"
hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value"
line.long 0x04 "MOD,Modulo Register"
hexmask.long.word 0x04 0.--15. 1. "MOD,Modulo value"
repeat 8. (increment 0x0C 0x08)(increment 0. 1.)
if (((per.l(ad:0x2840000+0x54))&0x04)==0x04)
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
bitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
bitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
bitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
else
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
rbitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
rbitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
rbitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
endif
group.long ($1+0x04)++0x03
line.long 0x00 "C$2V,Channel ($2) Value Register"
hexmask.long.word 0x00 0.--15. 1. "VAL,Channel value"
repeat.end
group.long 0x4C++0x03
line.long 0x00 "CNTIN,Counter Initial Value Register"
hexmask.long.word 0x00 0.--15. 1. "INIT,Initial value of the FTM counter"
rgroup.long 0x50++0x03
line.long 0x00 "STATUS,Capture and Compare Status Register"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "Not occurred,Occurred"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "Not occurred,Occurred"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "Not occurred,Occurred"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "Not occurred,Occurred"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "Not occurred,Occurred"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "Not occurred,Occurred"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "Not occurred,Occurred"
if (((per.l(ad:0x2840000+0x54))&0x04)==0x04)
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
bitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
bitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
else
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
rbitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
rbitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
endif
group.long 0x58++0x0B
line.long 0x00 "SYNC,Synchronization Register"
bitfld.long 0x00 7. "SWSYNC,PWM synchronization software trigger" "Not selected,Selected"
bitfld.long 0x00 6. "TRIG2,PWM synchronization hardware trigger 2" "Disabled,Enabled"
bitfld.long 0x00 5. "TRIG1,PWM synchronization hardware trigger 1" "Disabled,Enabled"
bitfld.long 0x00 4. "TRIG0,PWM synchronization hardware trigger 0" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "SYNCHOM,Output mask synchronization" "Rising edges,PWM"
bitfld.long 0x00 2. "REINIT,FTM counter reinitialization by synchronization" "Not reinitialized,Reinitialized"
bitfld.long 0x00 1. "CNTMAX,Maximum loading point enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CNTMIN,Minimum loading point enable" "Disabled,Enabled"
line.long 0x04 "OUTINIT,Initial State for Channels Output Register"
bitfld.long 0x04 7. "CH7OI,Channel 7 output initialization value" "0,1"
bitfld.long 0x04 6. "CH6OI,Channel 6 output initialization value" "0,1"
bitfld.long 0x04 5. "CH5OI,Channel 5 output initialization value" "0,1"
bitfld.long 0x04 4. "CH4OI,Channel 4 output initialization value" "0,1"
newline
bitfld.long 0x04 3. "CH3OI,Channel 3 output initialization value" "0,1"
bitfld.long 0x04 2. "CH2OI,Channel 2 output initialization value" "0,1"
bitfld.long 0x04 1. "CH1OI,Channel 1 output initialization value" "0,1"
bitfld.long 0x04 0. "CH0OI,Channel 0 output initialization value" "0,1"
line.long 0x08 "OUTMASK,Output Mask Register"
bitfld.long 0x08 7. "CH7OM,Channel 7 output mask" "Not masked,Masked"
bitfld.long 0x08 6. "CH6OM,Channel 6 output mask" "Not masked,Masked"
bitfld.long 0x08 5. "CH5OM,Channel 5 output mask" "Not masked,Masked"
bitfld.long 0x08 4. "CH4OM,Channel 4 output mask" "Not masked,Masked"
newline
bitfld.long 0x08 3. "CH3OM,Channel 3 output mask" "Not masked,Masked"
bitfld.long 0x08 2. "CH2OM,Channel 2 output mask" "Not masked,Masked"
bitfld.long 0x08 1. "CH1OM,Channel 1 output mask" "Not masked,Masked"
bitfld.long 0x08 0. "CH0OM,Channel 0 output mask" "Not masked,Masked"
if (((per.l(ad:0x2840000+0x54))&0x04)==0x04)
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
bitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
bitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
bitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
bitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
bitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
bitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
bitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
bitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
bitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
bitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
bitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
bitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
bitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
bitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
else
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
rbitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
rbitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
rbitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
rbitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
rbitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
rbitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
rbitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
rbitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
rbitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
rbitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
rbitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
rbitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
rbitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
rbitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
rbitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
rbitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
endif
if (((per.l(ad:0x2840000+0x54))&0x04)==0x04)
group.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
else
rgroup.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.long 0x6C++0x03
line.long 0x00 "EXTTRIG,FTM External Trigger Register"
rbitfld.long 0x00 7. "TRIGF,Channel trigger flag" "Not triggered,Triggered"
bitfld.long 0x00 6. "INITTRIGEN,Initialization trigger enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CH1TRIG,Channel 1 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CH0TRIG,Channel 0 trigger enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CH5TRIG,Channel 5 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CH4TRIG,Channel 4 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 1. "CH3TRIG,Channel 3 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CH2TRIG,Channel 2 trigger enable" "Disabled,Enabled"
if (((per.l(ad:0x2840000+0x54))&0x04)==0x04)
group.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
else
rgroup.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
endif
group.long 0x74++0x07
line.long 0x00 "FMS,Fault Mode Status"
bitfld.long 0x00 6. "WPEN,Write protection enable" "Disabled,Enabled"
line.long 0x04 "FILTER,Input Capture Filter Control Register"
bitfld.long 0x04 12.--15. "CH3FVAL,Channel 3 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "CH2FVAL,Channel 2 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "CH1FVAL,Channel 1 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "CH0FVAL,Channel 0 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x84++0x03
line.long 0x00 "CONF,Configuration Register"
bitfld.long 0x00 10. "GTBEOUT,Enables global time base signal generation to other FTMs" "Disabled,Enabled"
bitfld.long 0x00 9. "GTBEEN,Configures FTM to use external global time base signal that is generated by another FTM" "Disabled,Enabled"
bitfld.long 0x00 6.--7. "BDMMODE,Selects the FTM behavior in BDM mode" "0,1,2,3"
bitfld.long 0x00 0.--4. "NUMTOF,Selects the ratio between the number of counter overflows to the number of times the TOF bit is set" "Each,Not for next 1,Not for next 2,Not for next 3,Not for next 4,Not for next 5,Not for next 6,Not for next 7,Not for next 8,Not for next 9,Not for next 10,Not for next 11,Not for next 12,Not for next 13,Not for next 14,Not for next 15,Not for next 16,Not for next 17,Not for next 18,Not for next 19,Not for next 20,Not for next 21,Not for next 22,Not for next 23,Not for next 24,Not for next 25,Not for next 26,Not for next 27,Not for next 28,Not for next 29,Not for next 30,Not for next 31"
group.long 0x8C++0x0F
line.long 0x00 "SYNCONF,Synchronization Configuration Register"
bitfld.long 0x00 20. "HWSOC,Software output control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 19. "HWINVC,Inverting control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 18. "HWOM,Output mask synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 17. "HWWRBUF,MOD CNTIN and CV registers synchronization is activated by a hardware trigger" "Not activated,Activated"
newline
bitfld.long 0x00 16. "HWRSTCNT,FTM counter synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 12. "SWSOC,Software output control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 11. "SWINVC,Inverting control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 10. "SWOM,Output mask synchronization is activated by the software trigger" "Not activated,Activated"
newline
bitfld.long 0x00 9. "SWWRBUF,MOD CNTIN and CV registers synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 8. "SWRSTCNT,FTM counter synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 7. "SYNCMODE,Selects the PWM synchronization mode" "Legacy PWM,Enhanced PWM"
bitfld.long 0x00 5. "SWOC,SWOCTRL register synchronization" "All rising edges,PWM synchronization"
newline
bitfld.long 0x00 4. "INVC,INVCTRL register synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 2. "CNTINC,CNTIN Register Synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 0. "HWTRIGMODE,Hardware trigger mode" "Cleared,Not cleared"
line.long 0x04 "INVCTRL,FTM Inverting Control Register"
bitfld.long 0x04 3. "INV3EN,Pair channels 3 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 2. "INV2EN,Pair channels 2 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 1. "INV1EN,Pair channels 1 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 0. "INV0EN,Pair channels 0 inverting enable" "Disabled,Enabled"
line.long 0x08 "SWOCTRL,FTM Software Output Control Register"
bitfld.long 0x08 15. "CH7OCV,Channel 7 software output control value" "0 forced,1 forced"
bitfld.long 0x08 14. "CH6OCV,Channel 6 software output control value" "0 forced,1 forced"
bitfld.long 0x08 13. "CH5OCV,Channel 5 software output control value" "0 forced,1 forced"
bitfld.long 0x08 12. "CH4OCV,Channel 4 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 11. "CH3OCV,Channel 3 software output control value" "0 forced,1 forced"
bitfld.long 0x08 10. "CH2OCV,Channel 2 software output control value" "0 forced,1 forced"
bitfld.long 0x08 9. "CH1OCV,Channel 1 software output control value" "0 forced,1 forced"
bitfld.long 0x08 8. "CH0OCV,Channel 0 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 7. "CH7OC,Channel 7 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 6. "CH6OC,Channel 6 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 5. "CH5OC,Channel 5 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 4. "CH4OC,Channel 4 software output control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "CH3OC,Channel 3 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 2. "CH2OC,Channel 2 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "CH1OC,Channel 1 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 0. "CH0OC,Channel 0 software output control enable" "Disabled,Enabled"
line.long 0x0C "PWMLOAD,FTM PWM Load Register"
bitfld.long 0x0C 9. "LDOK,Load enable" "Disabled,Enabled"
bitfld.long 0x0C 7. "CH7SEL,Includes channel 7 in matching process" "Not included,Included"
bitfld.long 0x0C 6. "CH6SEL,Includes channel 6 in matching process" "Not included,Included"
bitfld.long 0x0C 5. "CH5SEL,Includes channel 5 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 4. "CH4SEL,Includes channel 4 in matching process" "Not included,Included"
bitfld.long 0x0C 3. "CH3SEL,Includes channel 3 in matching process" "Not included,Included"
bitfld.long 0x0C 2. "CH2SEL,Includes channel 2 in matching process" "Not included,Included"
bitfld.long 0x0C 1. "CH1SEL,Includes channel 1 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 0. "CH0SEL,Includes channel 0 in matching process" "Not included,Included"
tree.end
tree "FlexTimer 6"
base ad:0x2850000
if (((per.l(ad:0x2850000+0x54))&0x04)==0x04)
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
bitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
bitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
else
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
rbitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
rbitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
endif
group.long 0x04++0x07
line.long 0x00 "CNT,Counter Register"
hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value"
line.long 0x04 "MOD,Modulo Register"
hexmask.long.word 0x04 0.--15. 1. "MOD,Modulo value"
repeat 8. (increment 0x0C 0x08)(increment 0. 1.)
if (((per.l(ad:0x2850000+0x54))&0x04)==0x04)
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
bitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
bitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
bitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
else
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
rbitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
rbitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
rbitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
endif
group.long ($1+0x04)++0x03
line.long 0x00 "C$2V,Channel ($2) Value Register"
hexmask.long.word 0x00 0.--15. 1. "VAL,Channel value"
repeat.end
group.long 0x4C++0x03
line.long 0x00 "CNTIN,Counter Initial Value Register"
hexmask.long.word 0x00 0.--15. 1. "INIT,Initial value of the FTM counter"
rgroup.long 0x50++0x03
line.long 0x00 "STATUS,Capture and Compare Status Register"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "Not occurred,Occurred"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "Not occurred,Occurred"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "Not occurred,Occurred"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "Not occurred,Occurred"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "Not occurred,Occurred"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "Not occurred,Occurred"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "Not occurred,Occurred"
if (((per.l(ad:0x2850000+0x54))&0x04)==0x04)
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
bitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
bitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
else
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
rbitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
rbitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
endif
group.long 0x58++0x0B
line.long 0x00 "SYNC,Synchronization Register"
bitfld.long 0x00 7. "SWSYNC,PWM synchronization software trigger" "Not selected,Selected"
bitfld.long 0x00 6. "TRIG2,PWM synchronization hardware trigger 2" "Disabled,Enabled"
bitfld.long 0x00 5. "TRIG1,PWM synchronization hardware trigger 1" "Disabled,Enabled"
bitfld.long 0x00 4. "TRIG0,PWM synchronization hardware trigger 0" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "SYNCHOM,Output mask synchronization" "Rising edges,PWM"
bitfld.long 0x00 2. "REINIT,FTM counter reinitialization by synchronization" "Not reinitialized,Reinitialized"
bitfld.long 0x00 1. "CNTMAX,Maximum loading point enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CNTMIN,Minimum loading point enable" "Disabled,Enabled"
line.long 0x04 "OUTINIT,Initial State for Channels Output Register"
bitfld.long 0x04 7. "CH7OI,Channel 7 output initialization value" "0,1"
bitfld.long 0x04 6. "CH6OI,Channel 6 output initialization value" "0,1"
bitfld.long 0x04 5. "CH5OI,Channel 5 output initialization value" "0,1"
bitfld.long 0x04 4. "CH4OI,Channel 4 output initialization value" "0,1"
newline
bitfld.long 0x04 3. "CH3OI,Channel 3 output initialization value" "0,1"
bitfld.long 0x04 2. "CH2OI,Channel 2 output initialization value" "0,1"
bitfld.long 0x04 1. "CH1OI,Channel 1 output initialization value" "0,1"
bitfld.long 0x04 0. "CH0OI,Channel 0 output initialization value" "0,1"
line.long 0x08 "OUTMASK,Output Mask Register"
bitfld.long 0x08 7. "CH7OM,Channel 7 output mask" "Not masked,Masked"
bitfld.long 0x08 6. "CH6OM,Channel 6 output mask" "Not masked,Masked"
bitfld.long 0x08 5. "CH5OM,Channel 5 output mask" "Not masked,Masked"
bitfld.long 0x08 4. "CH4OM,Channel 4 output mask" "Not masked,Masked"
newline
bitfld.long 0x08 3. "CH3OM,Channel 3 output mask" "Not masked,Masked"
bitfld.long 0x08 2. "CH2OM,Channel 2 output mask" "Not masked,Masked"
bitfld.long 0x08 1. "CH1OM,Channel 1 output mask" "Not masked,Masked"
bitfld.long 0x08 0. "CH0OM,Channel 0 output mask" "Not masked,Masked"
if (((per.l(ad:0x2850000+0x54))&0x04)==0x04)
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
bitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
bitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
bitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
bitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
bitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
bitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
bitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
bitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
bitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
bitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
bitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
bitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
bitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
bitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
else
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
rbitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
rbitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
rbitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
rbitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
rbitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
rbitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
rbitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
rbitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
rbitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
rbitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
rbitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
rbitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
rbitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
rbitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
rbitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
rbitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
endif
if (((per.l(ad:0x2850000+0x54))&0x04)==0x04)
group.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
else
rgroup.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.long 0x6C++0x03
line.long 0x00 "EXTTRIG,FTM External Trigger Register"
rbitfld.long 0x00 7. "TRIGF,Channel trigger flag" "Not triggered,Triggered"
bitfld.long 0x00 6. "INITTRIGEN,Initialization trigger enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CH1TRIG,Channel 1 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CH0TRIG,Channel 0 trigger enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CH5TRIG,Channel 5 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CH4TRIG,Channel 4 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 1. "CH3TRIG,Channel 3 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CH2TRIG,Channel 2 trigger enable" "Disabled,Enabled"
if (((per.l(ad:0x2850000+0x54))&0x04)==0x04)
group.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
else
rgroup.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
endif
group.long 0x74++0x07
line.long 0x00 "FMS,Fault Mode Status"
bitfld.long 0x00 6. "WPEN,Write protection enable" "Disabled,Enabled"
line.long 0x04 "FILTER,Input Capture Filter Control Register"
bitfld.long 0x04 12.--15. "CH3FVAL,Channel 3 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "CH2FVAL,Channel 2 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "CH1FVAL,Channel 1 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "CH0FVAL,Channel 0 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x84++0x03
line.long 0x00 "CONF,Configuration Register"
bitfld.long 0x00 10. "GTBEOUT,Enables global time base signal generation to other FTMs" "Disabled,Enabled"
bitfld.long 0x00 9. "GTBEEN,Configures FTM to use external global time base signal that is generated by another FTM" "Disabled,Enabled"
bitfld.long 0x00 6.--7. "BDMMODE,Selects the FTM behavior in BDM mode" "0,1,2,3"
bitfld.long 0x00 0.--4. "NUMTOF,Selects the ratio between the number of counter overflows to the number of times the TOF bit is set" "Each,Not for next 1,Not for next 2,Not for next 3,Not for next 4,Not for next 5,Not for next 6,Not for next 7,Not for next 8,Not for next 9,Not for next 10,Not for next 11,Not for next 12,Not for next 13,Not for next 14,Not for next 15,Not for next 16,Not for next 17,Not for next 18,Not for next 19,Not for next 20,Not for next 21,Not for next 22,Not for next 23,Not for next 24,Not for next 25,Not for next 26,Not for next 27,Not for next 28,Not for next 29,Not for next 30,Not for next 31"
group.long 0x8C++0x0F
line.long 0x00 "SYNCONF,Synchronization Configuration Register"
bitfld.long 0x00 20. "HWSOC,Software output control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 19. "HWINVC,Inverting control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 18. "HWOM,Output mask synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 17. "HWWRBUF,MOD CNTIN and CV registers synchronization is activated by a hardware trigger" "Not activated,Activated"
newline
bitfld.long 0x00 16. "HWRSTCNT,FTM counter synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 12. "SWSOC,Software output control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 11. "SWINVC,Inverting control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 10. "SWOM,Output mask synchronization is activated by the software trigger" "Not activated,Activated"
newline
bitfld.long 0x00 9. "SWWRBUF,MOD CNTIN and CV registers synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 8. "SWRSTCNT,FTM counter synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 7. "SYNCMODE,Selects the PWM synchronization mode" "Legacy PWM,Enhanced PWM"
bitfld.long 0x00 5. "SWOC,SWOCTRL register synchronization" "All rising edges,PWM synchronization"
newline
bitfld.long 0x00 4. "INVC,INVCTRL register synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 2. "CNTINC,CNTIN Register Synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 0. "HWTRIGMODE,Hardware trigger mode" "Cleared,Not cleared"
line.long 0x04 "INVCTRL,FTM Inverting Control Register"
bitfld.long 0x04 3. "INV3EN,Pair channels 3 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 2. "INV2EN,Pair channels 2 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 1. "INV1EN,Pair channels 1 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 0. "INV0EN,Pair channels 0 inverting enable" "Disabled,Enabled"
line.long 0x08 "SWOCTRL,FTM Software Output Control Register"
bitfld.long 0x08 15. "CH7OCV,Channel 7 software output control value" "0 forced,1 forced"
bitfld.long 0x08 14. "CH6OCV,Channel 6 software output control value" "0 forced,1 forced"
bitfld.long 0x08 13. "CH5OCV,Channel 5 software output control value" "0 forced,1 forced"
bitfld.long 0x08 12. "CH4OCV,Channel 4 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 11. "CH3OCV,Channel 3 software output control value" "0 forced,1 forced"
bitfld.long 0x08 10. "CH2OCV,Channel 2 software output control value" "0 forced,1 forced"
bitfld.long 0x08 9. "CH1OCV,Channel 1 software output control value" "0 forced,1 forced"
bitfld.long 0x08 8. "CH0OCV,Channel 0 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 7. "CH7OC,Channel 7 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 6. "CH6OC,Channel 6 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 5. "CH5OC,Channel 5 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 4. "CH4OC,Channel 4 software output control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "CH3OC,Channel 3 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 2. "CH2OC,Channel 2 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "CH1OC,Channel 1 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 0. "CH0OC,Channel 0 software output control enable" "Disabled,Enabled"
line.long 0x0C "PWMLOAD,FTM PWM Load Register"
bitfld.long 0x0C 9. "LDOK,Load enable" "Disabled,Enabled"
bitfld.long 0x0C 7. "CH7SEL,Includes channel 7 in matching process" "Not included,Included"
bitfld.long 0x0C 6. "CH6SEL,Includes channel 6 in matching process" "Not included,Included"
bitfld.long 0x0C 5. "CH5SEL,Includes channel 5 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 4. "CH4SEL,Includes channel 4 in matching process" "Not included,Included"
bitfld.long 0x0C 3. "CH3SEL,Includes channel 3 in matching process" "Not included,Included"
bitfld.long 0x0C 2. "CH2SEL,Includes channel 2 in matching process" "Not included,Included"
bitfld.long 0x0C 1. "CH1SEL,Includes channel 1 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 0. "CH0SEL,Includes channel 0 in matching process" "Not included,Included"
tree.end
tree "FlexTimer 7"
base ad:0x2860000
if (((per.l(ad:0x2860000+0x54))&0x04)==0x04)
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
bitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
bitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
else
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
rbitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
rbitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
endif
group.long 0x04++0x07
line.long 0x00 "CNT,Counter Register"
hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value"
line.long 0x04 "MOD,Modulo Register"
hexmask.long.word 0x04 0.--15. 1. "MOD,Modulo value"
repeat 8. (increment 0x0C 0x08)(increment 0. 1.)
if (((per.l(ad:0x2860000+0x54))&0x04)==0x04)
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
bitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
bitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
bitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
else
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
rbitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
rbitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
rbitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
endif
group.long ($1+0x04)++0x03
line.long 0x00 "C$2V,Channel ($2) Value Register"
hexmask.long.word 0x00 0.--15. 1. "VAL,Channel value"
repeat.end
group.long 0x4C++0x03
line.long 0x00 "CNTIN,Counter Initial Value Register"
hexmask.long.word 0x00 0.--15. 1. "INIT,Initial value of the FTM counter"
rgroup.long 0x50++0x03
line.long 0x00 "STATUS,Capture and Compare Status Register"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "Not occurred,Occurred"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "Not occurred,Occurred"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "Not occurred,Occurred"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "Not occurred,Occurred"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "Not occurred,Occurred"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "Not occurred,Occurred"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "Not occurred,Occurred"
if (((per.l(ad:0x2860000+0x54))&0x04)==0x04)
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
bitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
bitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
else
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
rbitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
rbitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
endif
group.long 0x58++0x0B
line.long 0x00 "SYNC,Synchronization Register"
bitfld.long 0x00 7. "SWSYNC,PWM synchronization software trigger" "Not selected,Selected"
bitfld.long 0x00 6. "TRIG2,PWM synchronization hardware trigger 2" "Disabled,Enabled"
bitfld.long 0x00 5. "TRIG1,PWM synchronization hardware trigger 1" "Disabled,Enabled"
bitfld.long 0x00 4. "TRIG0,PWM synchronization hardware trigger 0" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "SYNCHOM,Output mask synchronization" "Rising edges,PWM"
bitfld.long 0x00 2. "REINIT,FTM counter reinitialization by synchronization" "Not reinitialized,Reinitialized"
bitfld.long 0x00 1. "CNTMAX,Maximum loading point enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CNTMIN,Minimum loading point enable" "Disabled,Enabled"
line.long 0x04 "OUTINIT,Initial State for Channels Output Register"
bitfld.long 0x04 7. "CH7OI,Channel 7 output initialization value" "0,1"
bitfld.long 0x04 6. "CH6OI,Channel 6 output initialization value" "0,1"
bitfld.long 0x04 5. "CH5OI,Channel 5 output initialization value" "0,1"
bitfld.long 0x04 4. "CH4OI,Channel 4 output initialization value" "0,1"
newline
bitfld.long 0x04 3. "CH3OI,Channel 3 output initialization value" "0,1"
bitfld.long 0x04 2. "CH2OI,Channel 2 output initialization value" "0,1"
bitfld.long 0x04 1. "CH1OI,Channel 1 output initialization value" "0,1"
bitfld.long 0x04 0. "CH0OI,Channel 0 output initialization value" "0,1"
line.long 0x08 "OUTMASK,Output Mask Register"
bitfld.long 0x08 7. "CH7OM,Channel 7 output mask" "Not masked,Masked"
bitfld.long 0x08 6. "CH6OM,Channel 6 output mask" "Not masked,Masked"
bitfld.long 0x08 5. "CH5OM,Channel 5 output mask" "Not masked,Masked"
bitfld.long 0x08 4. "CH4OM,Channel 4 output mask" "Not masked,Masked"
newline
bitfld.long 0x08 3. "CH3OM,Channel 3 output mask" "Not masked,Masked"
bitfld.long 0x08 2. "CH2OM,Channel 2 output mask" "Not masked,Masked"
bitfld.long 0x08 1. "CH1OM,Channel 1 output mask" "Not masked,Masked"
bitfld.long 0x08 0. "CH0OM,Channel 0 output mask" "Not masked,Masked"
if (((per.l(ad:0x2860000+0x54))&0x04)==0x04)
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
bitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
bitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
bitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
bitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
bitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
bitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
bitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
bitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
bitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
bitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
bitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
bitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
bitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
bitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
else
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
rbitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
rbitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
rbitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
rbitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
rbitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
rbitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
rbitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
rbitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
rbitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
rbitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
rbitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
rbitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
rbitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
rbitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
rbitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
rbitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
endif
if (((per.l(ad:0x2860000+0x54))&0x04)==0x04)
group.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
else
rgroup.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.long 0x6C++0x03
line.long 0x00 "EXTTRIG,FTM External Trigger Register"
rbitfld.long 0x00 7. "TRIGF,Channel trigger flag" "Not triggered,Triggered"
bitfld.long 0x00 6. "INITTRIGEN,Initialization trigger enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CH1TRIG,Channel 1 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CH0TRIG,Channel 0 trigger enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CH5TRIG,Channel 5 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CH4TRIG,Channel 4 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 1. "CH3TRIG,Channel 3 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CH2TRIG,Channel 2 trigger enable" "Disabled,Enabled"
if (((per.l(ad:0x2860000+0x54))&0x04)==0x04)
group.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
else
rgroup.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
endif
group.long 0x74++0x07
line.long 0x00 "FMS,Fault Mode Status"
bitfld.long 0x00 6. "WPEN,Write protection enable" "Disabled,Enabled"
line.long 0x04 "FILTER,Input Capture Filter Control Register"
bitfld.long 0x04 12.--15. "CH3FVAL,Channel 3 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "CH2FVAL,Channel 2 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "CH1FVAL,Channel 1 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "CH0FVAL,Channel 0 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x84++0x03
line.long 0x00 "CONF,Configuration Register"
bitfld.long 0x00 10. "GTBEOUT,Enables global time base signal generation to other FTMs" "Disabled,Enabled"
bitfld.long 0x00 9. "GTBEEN,Configures FTM to use external global time base signal that is generated by another FTM" "Disabled,Enabled"
bitfld.long 0x00 6.--7. "BDMMODE,Selects the FTM behavior in BDM mode" "0,1,2,3"
bitfld.long 0x00 0.--4. "NUMTOF,Selects the ratio between the number of counter overflows to the number of times the TOF bit is set" "Each,Not for next 1,Not for next 2,Not for next 3,Not for next 4,Not for next 5,Not for next 6,Not for next 7,Not for next 8,Not for next 9,Not for next 10,Not for next 11,Not for next 12,Not for next 13,Not for next 14,Not for next 15,Not for next 16,Not for next 17,Not for next 18,Not for next 19,Not for next 20,Not for next 21,Not for next 22,Not for next 23,Not for next 24,Not for next 25,Not for next 26,Not for next 27,Not for next 28,Not for next 29,Not for next 30,Not for next 31"
group.long 0x8C++0x0F
line.long 0x00 "SYNCONF,Synchronization Configuration Register"
bitfld.long 0x00 20. "HWSOC,Software output control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 19. "HWINVC,Inverting control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 18. "HWOM,Output mask synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 17. "HWWRBUF,MOD CNTIN and CV registers synchronization is activated by a hardware trigger" "Not activated,Activated"
newline
bitfld.long 0x00 16. "HWRSTCNT,FTM counter synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 12. "SWSOC,Software output control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 11. "SWINVC,Inverting control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 10. "SWOM,Output mask synchronization is activated by the software trigger" "Not activated,Activated"
newline
bitfld.long 0x00 9. "SWWRBUF,MOD CNTIN and CV registers synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 8. "SWRSTCNT,FTM counter synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 7. "SYNCMODE,Selects the PWM synchronization mode" "Legacy PWM,Enhanced PWM"
bitfld.long 0x00 5. "SWOC,SWOCTRL register synchronization" "All rising edges,PWM synchronization"
newline
bitfld.long 0x00 4. "INVC,INVCTRL register synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 2. "CNTINC,CNTIN Register Synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 0. "HWTRIGMODE,Hardware trigger mode" "Cleared,Not cleared"
line.long 0x04 "INVCTRL,FTM Inverting Control Register"
bitfld.long 0x04 3. "INV3EN,Pair channels 3 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 2. "INV2EN,Pair channels 2 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 1. "INV1EN,Pair channels 1 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 0. "INV0EN,Pair channels 0 inverting enable" "Disabled,Enabled"
line.long 0x08 "SWOCTRL,FTM Software Output Control Register"
bitfld.long 0x08 15. "CH7OCV,Channel 7 software output control value" "0 forced,1 forced"
bitfld.long 0x08 14. "CH6OCV,Channel 6 software output control value" "0 forced,1 forced"
bitfld.long 0x08 13. "CH5OCV,Channel 5 software output control value" "0 forced,1 forced"
bitfld.long 0x08 12. "CH4OCV,Channel 4 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 11. "CH3OCV,Channel 3 software output control value" "0 forced,1 forced"
bitfld.long 0x08 10. "CH2OCV,Channel 2 software output control value" "0 forced,1 forced"
bitfld.long 0x08 9. "CH1OCV,Channel 1 software output control value" "0 forced,1 forced"
bitfld.long 0x08 8. "CH0OCV,Channel 0 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 7. "CH7OC,Channel 7 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 6. "CH6OC,Channel 6 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 5. "CH5OC,Channel 5 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 4. "CH4OC,Channel 4 software output control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "CH3OC,Channel 3 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 2. "CH2OC,Channel 2 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "CH1OC,Channel 1 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 0. "CH0OC,Channel 0 software output control enable" "Disabled,Enabled"
line.long 0x0C "PWMLOAD,FTM PWM Load Register"
bitfld.long 0x0C 9. "LDOK,Load enable" "Disabled,Enabled"
bitfld.long 0x0C 7. "CH7SEL,Includes channel 7 in matching process" "Not included,Included"
bitfld.long 0x0C 6. "CH6SEL,Includes channel 6 in matching process" "Not included,Included"
bitfld.long 0x0C 5. "CH5SEL,Includes channel 5 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 4. "CH4SEL,Includes channel 4 in matching process" "Not included,Included"
bitfld.long 0x0C 3. "CH3SEL,Includes channel 3 in matching process" "Not included,Included"
bitfld.long 0x0C 2. "CH2SEL,Includes channel 2 in matching process" "Not included,Included"
bitfld.long 0x0C 1. "CH1SEL,Includes channel 1 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 0. "CH0SEL,Includes channel 0 in matching process" "Not included,Included"
tree.end
tree "FlexTimer 8"
base ad:0x2870000
if (((per.l(ad:0x2870000+0x54))&0x04)==0x04)
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
bitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
bitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
else
group.long 0x00++0x03
line.long 0x00 "SC,Status And Control Register"
rbitfld.long 0x00 7. "TOF,Timer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 6. "TOIE,Timer overflow interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "CPWMS,Center-aligned PWM select" "Up,Up-Down"
rbitfld.long 0x00 3.--4. "CLKS,Clock source selection" "None,System,Fixed frequency,External"
newline
rbitfld.long 0x00 0.--2. "PS,Prescale factor selection" "/1,/2,/4,/8,/16,/32,/64,/128"
endif
group.long 0x04++0x07
line.long 0x00 "CNT,Counter Register"
hexmask.long.word 0x00 0.--15. 1. "COUNT,Counter value"
line.long 0x04 "MOD,Modulo Register"
hexmask.long.word 0x04 0.--15. 1. "MOD,Modulo value"
repeat 8. (increment 0x0C 0x08)(increment 0. 1.)
if (((per.l(ad:0x2870000+0x54))&0x04)==0x04)
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
bitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
bitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
bitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
else
group.long $1++0x03
line.long 0x00 "C$2SC,Channel ($2) Status And Control Register"
rbitfld.long 0x00 7. "CHF,Set by hardware when an event occurs on the channel" "Not occurred,Occurred"
bitfld.long 0x00 6. "CHIE,Channel interrupt enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "MSB,Channel mode select" "0,1"
rbitfld.long 0x00 4. "MSA,Channel mode select" "0,1"
newline
rbitfld.long 0x00 3. "ELSB,Edge or level select" "0,1"
rbitfld.long 0x00 2. "ELSA,Edge or level select" "0,1"
endif
group.long ($1+0x04)++0x03
line.long 0x00 "C$2V,Channel ($2) Value Register"
hexmask.long.word 0x00 0.--15. 1. "VAL,Channel value"
repeat.end
group.long 0x4C++0x03
line.long 0x00 "CNTIN,Counter Initial Value Register"
hexmask.long.word 0x00 0.--15. 1. "INIT,Initial value of the FTM counter"
rgroup.long 0x50++0x03
line.long 0x00 "STATUS,Capture and Compare Status Register"
bitfld.long 0x00 7. "CH7F,Channel 7 flag" "Not occurred,Occurred"
bitfld.long 0x00 6. "CH6F,Channel 6 flag" "Not occurred,Occurred"
bitfld.long 0x00 5. "CH5F,Channel 5 flag" "Not occurred,Occurred"
bitfld.long 0x00 4. "CH4F,Channel 4 flag" "Not occurred,Occurred"
newline
bitfld.long 0x00 3. "CH3F,Channel 3 flag" "Not occurred,Occurred"
bitfld.long 0x00 2. "CH2F,Channel 2 flag" "Not occurred,Occurred"
bitfld.long 0x00 1. "CH1F,Channel 1 flag" "Not occurred,Occurred"
bitfld.long 0x00 0. "CH0F,Channel 0 flag" "Not occurred,Occurred"
if (((per.l(ad:0x2870000+0x54))&0x04)==0x04)
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
bitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
bitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
else
group.long 0x54++0x03
line.long 0x00 "MODE,Features Mode Selection Register"
rbitfld.long 0x00 4. "CAPTEST,Capture test mode enable" "Disabled,Enabled"
bitfld.long 0x00 3. "PWMSYNC,PWM synchronization mode" "No restrictions,SW:MOD CnV/HW:OUTMASK FTM"
bitfld.long 0x00 2. "WPDIS,Write protection disable" "No,Yes"
bitfld.long 0x00 1. "INIT,Initialize the channels output" "No effect,Initialize"
newline
rbitfld.long 0x00 0. "FTMEN,FTM enable" "Disabled,Enabled"
endif
group.long 0x58++0x0B
line.long 0x00 "SYNC,Synchronization Register"
bitfld.long 0x00 7. "SWSYNC,PWM synchronization software trigger" "Not selected,Selected"
bitfld.long 0x00 6. "TRIG2,PWM synchronization hardware trigger 2" "Disabled,Enabled"
bitfld.long 0x00 5. "TRIG1,PWM synchronization hardware trigger 1" "Disabled,Enabled"
bitfld.long 0x00 4. "TRIG0,PWM synchronization hardware trigger 0" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "SYNCHOM,Output mask synchronization" "Rising edges,PWM"
bitfld.long 0x00 2. "REINIT,FTM counter reinitialization by synchronization" "Not reinitialized,Reinitialized"
bitfld.long 0x00 1. "CNTMAX,Maximum loading point enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CNTMIN,Minimum loading point enable" "Disabled,Enabled"
line.long 0x04 "OUTINIT,Initial State for Channels Output Register"
bitfld.long 0x04 7. "CH7OI,Channel 7 output initialization value" "0,1"
bitfld.long 0x04 6. "CH6OI,Channel 6 output initialization value" "0,1"
bitfld.long 0x04 5. "CH5OI,Channel 5 output initialization value" "0,1"
bitfld.long 0x04 4. "CH4OI,Channel 4 output initialization value" "0,1"
newline
bitfld.long 0x04 3. "CH3OI,Channel 3 output initialization value" "0,1"
bitfld.long 0x04 2. "CH2OI,Channel 2 output initialization value" "0,1"
bitfld.long 0x04 1. "CH1OI,Channel 1 output initialization value" "0,1"
bitfld.long 0x04 0. "CH0OI,Channel 0 output initialization value" "0,1"
line.long 0x08 "OUTMASK,Output Mask Register"
bitfld.long 0x08 7. "CH7OM,Channel 7 output mask" "Not masked,Masked"
bitfld.long 0x08 6. "CH6OM,Channel 6 output mask" "Not masked,Masked"
bitfld.long 0x08 5. "CH5OM,Channel 5 output mask" "Not masked,Masked"
bitfld.long 0x08 4. "CH4OM,Channel 4 output mask" "Not masked,Masked"
newline
bitfld.long 0x08 3. "CH3OM,Channel 3 output mask" "Not masked,Masked"
bitfld.long 0x08 2. "CH2OM,Channel 2 output mask" "Not masked,Masked"
bitfld.long 0x08 1. "CH1OM,Channel 1 output mask" "Not masked,Masked"
bitfld.long 0x08 0. "CH0OM,Channel 0 output mask" "Not masked,Masked"
if (((per.l(ad:0x2870000+0x54))&0x04)==0x04)
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
bitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
bitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
bitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
bitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
bitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
bitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
bitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
bitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
bitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
bitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
bitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
bitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
bitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
bitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
else
group.long 0x64++0x03
line.long 0x00 "COMBINE,Function for Linked Channels Register"
bitfld.long 0x00 29. "SYNCEN3,Enables PWM synchronization of registers C6V and C7V" "Disabled,Enabled"
rbitfld.long 0x00 28. "DTEN3,Enables the deadtime insertion in the channels 6 and 7" "Disabled,Enabled"
bitfld.long 0x00 27. "DECAP3,Dual edge capture mode for channels 6 and 7" "Inactive,Active"
rbitfld.long 0x00 26. "DECAPEN3,Enables the dual edge capture mode in the channels 6 and 7" "Disabled,Enabled"
newline
rbitfld.long 0x00 25. "COMP3,Enables complementary mode for combined channels 6 and 7" "The same,Complement"
rbitfld.long 0x00 24. "COMBINE3,Enables the combine feature for channels 6 and 7" "Independent,Combined"
bitfld.long 0x00 21. "SYNCEN2,Enables PWM synchronization of registers C4V and C5V" "Disabled,Enabled"
rbitfld.long 0x00 20. "DTEN2,Enables the deadtime insertion in the channels 4 and 5" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "DECAP2,Dual edge capture mode for channels 4 and 5" "Inactive,Active"
rbitfld.long 0x00 18. "DECAPEN2,Enables the dual edge capture mode in the channels 4 and 5" "Disabled,Enabled"
rbitfld.long 0x00 17. "COMP2,Enables complementary mode for combined channels 4 and 5" "The same,Complement"
rbitfld.long 0x00 16. "COMBINE2,Enables the combine feature for channels 4 and 5" "Independent,Combined"
newline
bitfld.long 0x00 13. "SYNCEN1,Enables PWM synchronization of registers C2V and C3V" "Disabled,Enabled"
rbitfld.long 0x00 12. "DTEN1,Enables the deadtime insertion in the channels 2 and 3" "Disabled,Enabled"
bitfld.long 0x00 11. "DECAP1,Dual edge capture mode for channels 2 and 3" "Inactive,Active"
rbitfld.long 0x00 10. "DECAPEN1,Enables the dual edge capture mode in the channels 2 and 3" "Disabled,Enabled"
newline
rbitfld.long 0x00 9. "COMP1,Enables complementary mode for combined channels 2 and 3" "The same,Complement"
rbitfld.long 0x00 8. "COMBINE1,Enables the combine feature for channels 2 and 3" "Independent,Combined"
bitfld.long 0x00 5. "SYNCEN0,Enables PWM synchronization of registers C0V and C1V" "Disabled,Enabled"
rbitfld.long 0x00 4. "DTEN0,Enables the deadtime insertion in the channels 0 and 1" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DECAP0,Dual edge capture mode for channels 0 and 1" "Inactive,Active"
rbitfld.long 0x00 2. "DECAPEN0,Enables the dual edge capture mode in the channels 0 and 1" "Disabled,Enabled"
rbitfld.long 0x00 1. "COMP0,Enables complementary mode for combined channels 0 and 1" "The same,Complement"
rbitfld.long 0x00 0. "COMBINE0,Enables the combine feature for channels 0 and 1" "Independent,Combined"
endif
if (((per.l(ad:0x2870000+0x54))&0x04)==0x04)
group.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
else
rgroup.long 0x68++0x03
line.long 0x00 "DEADTIME,Deadtime Insertion Control Register"
bitfld.long 0x00 6.--7. "DTPS,Deadtime prescaler value" "/1,/1,/4,/16"
bitfld.long 0x00 0.--5. "DTVAL,Deadtime value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
endif
group.long 0x6C++0x03
line.long 0x00 "EXTTRIG,FTM External Trigger Register"
rbitfld.long 0x00 7. "TRIGF,Channel trigger flag" "Not triggered,Triggered"
bitfld.long 0x00 6. "INITTRIGEN,Initialization trigger enable" "Disabled,Enabled"
bitfld.long 0x00 5. "CH1TRIG,Channel 1 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 4. "CH0TRIG,Channel 0 trigger enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CH5TRIG,Channel 5 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 2. "CH4TRIG,Channel 4 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 1. "CH3TRIG,Channel 3 trigger enable" "Disabled,Enabled"
bitfld.long 0x00 0. "CH2TRIG,Channel 2 trigger enable" "Disabled,Enabled"
if (((per.l(ad:0x2870000+0x54))&0x04)==0x04)
group.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
else
rgroup.long 0x70++0x03
line.long 0x00 "POL,Channels Polarity Register"
bitfld.long 0x00 7. "POL7,Channel 7 polarity" "Active high,Active low"
bitfld.long 0x00 6. "POL6,Channel 6 polarity" "Active high,Active low"
bitfld.long 0x00 5. "POL5,Channel 5 polarity" "Active high,Active low"
bitfld.long 0x00 4. "POL4,Channel 4 polarity" "Active high,Active low"
newline
bitfld.long 0x00 3. "POL3,Channel 3 polarity" "Active high,Active low"
bitfld.long 0x00 2. "POL2,Channel 2 polarity" "Active high,Active low"
bitfld.long 0x00 1. "POL1,Channel 1 polarity" "Active high,Active low"
bitfld.long 0x00 0. "POL0,Channel 0 polarity" "Active high,Active low"
endif
group.long 0x74++0x07
line.long 0x00 "FMS,Fault Mode Status"
bitfld.long 0x00 6. "WPEN,Write protection enable" "Disabled,Enabled"
line.long 0x04 "FILTER,Input Capture Filter Control Register"
bitfld.long 0x04 12.--15. "CH3FVAL,Channel 3 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 8.--11. "CH2FVAL,Channel 2 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "CH1FVAL,Channel 1 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "CH0FVAL,Channel 0 input filter" "Disabled,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x84++0x03
line.long 0x00 "CONF,Configuration Register"
bitfld.long 0x00 10. "GTBEOUT,Enables global time base signal generation to other FTMs" "Disabled,Enabled"
bitfld.long 0x00 9. "GTBEEN,Configures FTM to use external global time base signal that is generated by another FTM" "Disabled,Enabled"
bitfld.long 0x00 6.--7. "BDMMODE,Selects the FTM behavior in BDM mode" "0,1,2,3"
bitfld.long 0x00 0.--4. "NUMTOF,Selects the ratio between the number of counter overflows to the number of times the TOF bit is set" "Each,Not for next 1,Not for next 2,Not for next 3,Not for next 4,Not for next 5,Not for next 6,Not for next 7,Not for next 8,Not for next 9,Not for next 10,Not for next 11,Not for next 12,Not for next 13,Not for next 14,Not for next 15,Not for next 16,Not for next 17,Not for next 18,Not for next 19,Not for next 20,Not for next 21,Not for next 22,Not for next 23,Not for next 24,Not for next 25,Not for next 26,Not for next 27,Not for next 28,Not for next 29,Not for next 30,Not for next 31"
group.long 0x8C++0x0F
line.long 0x00 "SYNCONF,Synchronization Configuration Register"
bitfld.long 0x00 20. "HWSOC,Software output control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 19. "HWINVC,Inverting control synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 18. "HWOM,Output mask synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 17. "HWWRBUF,MOD CNTIN and CV registers synchronization is activated by a hardware trigger" "Not activated,Activated"
newline
bitfld.long 0x00 16. "HWRSTCNT,FTM counter synchronization is activated by a hardware trigger" "Not activated,Activated"
bitfld.long 0x00 12. "SWSOC,Software output control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 11. "SWINVC,Inverting control synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 10. "SWOM,Output mask synchronization is activated by the software trigger" "Not activated,Activated"
newline
bitfld.long 0x00 9. "SWWRBUF,MOD CNTIN and CV registers synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 8. "SWRSTCNT,FTM counter synchronization is activated by the software trigger" "Not activated,Activated"
bitfld.long 0x00 7. "SYNCMODE,Selects the PWM synchronization mode" "Legacy PWM,Enhanced PWM"
bitfld.long 0x00 5. "SWOC,SWOCTRL register synchronization" "All rising edges,PWM synchronization"
newline
bitfld.long 0x00 4. "INVC,INVCTRL register synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 2. "CNTINC,CNTIN Register Synchronization" "All rising edges,PWM synchronization"
bitfld.long 0x00 0. "HWTRIGMODE,Hardware trigger mode" "Cleared,Not cleared"
line.long 0x04 "INVCTRL,FTM Inverting Control Register"
bitfld.long 0x04 3. "INV3EN,Pair channels 3 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 2. "INV2EN,Pair channels 2 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 1. "INV1EN,Pair channels 1 inverting enable" "Disabled,Enabled"
bitfld.long 0x04 0. "INV0EN,Pair channels 0 inverting enable" "Disabled,Enabled"
line.long 0x08 "SWOCTRL,FTM Software Output Control Register"
bitfld.long 0x08 15. "CH7OCV,Channel 7 software output control value" "0 forced,1 forced"
bitfld.long 0x08 14. "CH6OCV,Channel 6 software output control value" "0 forced,1 forced"
bitfld.long 0x08 13. "CH5OCV,Channel 5 software output control value" "0 forced,1 forced"
bitfld.long 0x08 12. "CH4OCV,Channel 4 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 11. "CH3OCV,Channel 3 software output control value" "0 forced,1 forced"
bitfld.long 0x08 10. "CH2OCV,Channel 2 software output control value" "0 forced,1 forced"
bitfld.long 0x08 9. "CH1OCV,Channel 1 software output control value" "0 forced,1 forced"
bitfld.long 0x08 8. "CH0OCV,Channel 0 software output control value" "0 forced,1 forced"
newline
bitfld.long 0x08 7. "CH7OC,Channel 7 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 6. "CH6OC,Channel 6 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 5. "CH5OC,Channel 5 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 4. "CH4OC,Channel 4 software output control enable" "Disabled,Enabled"
newline
bitfld.long 0x08 3. "CH3OC,Channel 3 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 2. "CH2OC,Channel 2 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 1. "CH1OC,Channel 1 software output control enable" "Disabled,Enabled"
bitfld.long 0x08 0. "CH0OC,Channel 0 software output control enable" "Disabled,Enabled"
line.long 0x0C "PWMLOAD,FTM PWM Load Register"
bitfld.long 0x0C 9. "LDOK,Load enable" "Disabled,Enabled"
bitfld.long 0x0C 7. "CH7SEL,Includes channel 7 in matching process" "Not included,Included"
bitfld.long 0x0C 6. "CH6SEL,Includes channel 6 in matching process" "Not included,Included"
bitfld.long 0x0C 5. "CH5SEL,Includes channel 5 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 4. "CH4SEL,Includes channel 4 in matching process" "Not included,Included"
bitfld.long 0x0C 3. "CH3SEL,Includes channel 3 in matching process" "Not included,Included"
bitfld.long 0x0C 2. "CH2SEL,Includes channel 2 in matching process" "Not included,Included"
bitfld.long 0x0C 1. "CH1SEL,Includes channel 1 in matching process" "Not included,Included"
newline
bitfld.long 0x0C 0. "CH0SEL,Includes channel 0 in matching process" "Not included,Included"
tree.end
tree.end
tree "GPIO (General Purpose I/O)"
tree "GPIO_1"
base ad:0x02300000
group.long 0x00++0x17
line.long 0x00 "GPDIR,GPIO Direction Register"
bitfld.long 0x00 31. "DR31,Pin 31 direction select" "Input,Output"
bitfld.long 0x00 30. "DR30,Pin 30 direction select" "Input,Output"
bitfld.long 0x00 29. "DR29,Pin 29 direction select" "Input,Output"
bitfld.long 0x00 28. "DR28,Pin 28 direction select" "Input,Output"
newline
bitfld.long 0x00 27. "DR27,Pin 27 direction select" "Input,Output"
bitfld.long 0x00 26. "DR26,Pin 26 direction select" "Input,Output"
bitfld.long 0x00 25. "DR25,Pin 25 direction select" "Input,Output"
bitfld.long 0x00 24. "DR24,Pin 24 direction select" "Input,Output"
newline
bitfld.long 0x00 23. "DR23,Pin 23 direction select" "Input,Output"
bitfld.long 0x00 22. "DR22,Pin 22 direction select" "Input,Output"
bitfld.long 0x00 21. "DR21,Pin 21 direction select" "Input,Output"
bitfld.long 0x00 20. "DR20,Pin 20 direction select" "Input,Output"
newline
bitfld.long 0x00 19. "DR19,Pin 19 direction select" "Input,Output"
bitfld.long 0x00 18. "DR18,Pin 18 direction select" "Input,Output"
bitfld.long 0x00 17. "DR17,Pin 17 direction select" "Input,Output"
bitfld.long 0x00 16. "DR16,Pin 16 direction select" "Input,Output"
newline
bitfld.long 0x00 15. "DR15,Pin 15 direction select" "Input,Output"
bitfld.long 0x00 11. "DR11,Pin 11 direction select" "Input,Output"
bitfld.long 0x00 10. "DR10,Pin 10 direction select" "Input,Output"
bitfld.long 0x00 7. "DR7,Pin 7 direction select" "Input,Output"
newline
bitfld.long 0x00 6. "DR6,Pin 6 direction select" "Input,Output"
bitfld.long 0x00 3. "DR3,Pin 3 direction select" "Input,Output"
bitfld.long 0x00 2. "DR2,Pin 2 direction select" "Input,Output"
line.long 0x04 "GPODR,GPIO Open Drain Register"
bitfld.long 0x04 31. "OD31,Pin 31 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 30. "OD30,Pin 30 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 29. "OD29,Pin 29 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 28. "OD28,Pin 28 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 27. "OD27,Pin 27 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 26. "OD26,Pin 26 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 25. "OD25,Pin 25 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 24. "OD24,Pin 24 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 23. "OD23,Pin 23 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 22. "OD22,Pin 22 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 21. "OD21,Pin 21 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 20. "OD20,Pin 20 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 19. "OD19,Pin 19 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 18. "OD18,Pin 18 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 17. "OD17,Pin 17 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 16. "OD16,Pin 16 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 15. "OD15,Pin 15 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 11. "OD11,Pin 11 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 10. "OD10,Pin 10 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 7. "OD7,Pin 7 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 6. "OD6,Pin 6 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 3. "OD3,Pin 3 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 2. "OD2,Pin 2 open-drain configuration" "Actively driven,Open-drain"
line.long 0x08 "GPDAT,GPIO Data Register"
bitfld.long 0x08 31. "D31,Pin 31 data" "Low,High"
bitfld.long 0x08 30. "D30,Pin 30 data" "Low,High"
bitfld.long 0x08 29. "D29,Pin 29 data" "Low,High"
bitfld.long 0x08 28. "D28,Pin 28 data" "Low,High"
newline
bitfld.long 0x08 27. "D27,Pin 27 data" "Low,High"
bitfld.long 0x08 26. "D26,Pin 26 data" "Low,High"
bitfld.long 0x08 25. "D25,Pin 25 data" "Low,High"
bitfld.long 0x08 24. "D24,Pin 24 data" "Low,High"
newline
bitfld.long 0x08 23. "D23,Pin 23 data" "Low,High"
bitfld.long 0x08 22. "D22,Pin 22 data" "Low,High"
bitfld.long 0x08 21. "D21,Pin 21 data" "Low,High"
bitfld.long 0x08 20. "D20,Pin 20 data" "Low,High"
newline
bitfld.long 0x08 19. "D19,Pin 19 data" "Low,High"
bitfld.long 0x08 18. "D18,Pin 18 data" "Low,High"
bitfld.long 0x08 17. "D17,Pin 17 data" "Low,High"
bitfld.long 0x08 16. "D16,Pin 16 data" "Low,High"
newline
bitfld.long 0x08 15. "D15,Pin 15 data" "Low,High"
bitfld.long 0x08 11. "D11,Pin 11 data" "Low,High"
bitfld.long 0x08 10. "D10,Pin 10 data" "Low,High"
bitfld.long 0x08 7. "D7,Pin 7 data" "Low,High"
newline
bitfld.long 0x08 6. "D6,Pin 6 data" "Low,High"
bitfld.long 0x08 3. "D3,Pin 3 data" "Low,High"
bitfld.long 0x08 2. "D2,Pin 2 data" "Low,High"
line.long 0x0C "GPIER,GPIO Interrupt Event Register"
eventfld.long 0x0C 31. "EV31,Pin 31 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 30. "EV30,Pin 30 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 29. "EV29,Pin 29 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 28. "EV28,Pin 28 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 27. "EV27,Pin 27 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 26. "EV26,Pin 26 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 25. "EV25,Pin 25 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 24. "EV24,Pin 24 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 23. "EV23,Pin 23 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 22. "EV22,Pin 22 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 21. "EV21,Pin 21 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 20. "EV20,Pin 20 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 19. "EV19,Pin 19 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 18. "EV18,Pin 18 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 17. "EV17,Pin 17 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 16. "EV16,Pin 16 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 15. "EV15,Pin 15 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 11. "EV11,Pin 11 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 10. "EV10,Pin 10 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 7. "EV7,Pin 7 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 6. "EV6,Pin 6 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 3. "EV3,Pin 3 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 2. "EV2,Pin 2 interrupt event status" "No interrupt,Interrupt"
line.long 0x10 "GPIMR,GPIO Interrupt Mask Register"
bitfld.long 0x10 31. "IM31,Pin 31 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 30. "IM30,Pin 30 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 29. "IM29,Pin 29 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 28. "IM28,Pin 28 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 27. "IM27,Pin 27 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 26. "IM26,Pin 26 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 25. "IM25,Pin 25 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 24. "IM24,Pin 24 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 23. "IM23,Pin 23 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 22. "IM22,Pin 22 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 21. "IM21,Pin 21 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 20. "IM20,Pin 20 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 19. "IM19,Pin 19 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 18. "IM18,Pin 18 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 17. "IM17,Pin 17 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 16. "IM16,Pin 16 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 15. "IM15,Pin 15 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 11. "IM11,Pin 11 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 10. "IM10,Pin 10 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 7. "IM7,Pin 7 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 6. "IM6,Pin 6 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 3. "IM3,Pin 3 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 2. "IM2,Pin 2 interrupt mask" "Masked,Not masked"
line.long 0x14 "GPICR,GPIO Interrupt Control Register"
bitfld.long 0x14 31. "ED31,Pin 31 edge detection select" "Any change,Falling"
bitfld.long 0x14 30. "ED30,Pin 30 edge detection select" "Any change,Falling"
bitfld.long 0x14 29. "ED29,Pin 29 edge detection select" "Any change,Falling"
bitfld.long 0x14 28. "ED28,Pin 28 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 27. "ED27,Pin 27 edge detection select" "Any change,Falling"
bitfld.long 0x14 26. "ED26,Pin 26 edge detection select" "Any change,Falling"
bitfld.long 0x14 25. "ED25,Pin 25 edge detection select" "Any change,Falling"
bitfld.long 0x14 24. "ED24,Pin 24 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 23. "ED23,Pin 23 edge detection select" "Any change,Falling"
bitfld.long 0x14 22. "ED22,Pin 22 edge detection select" "Any change,Falling"
bitfld.long 0x14 21. "ED21,Pin 21 edge detection select" "Any change,Falling"
bitfld.long 0x14 20. "ED20,Pin 20 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 19. "ED19,Pin 19 edge detection select" "Any change,Falling"
bitfld.long 0x14 18. "ED18,Pin 18 edge detection select" "Any change,Falling"
bitfld.long 0x14 17. "ED17,Pin 17 edge detection select" "Any change,Falling"
bitfld.long 0x14 16. "ED16,Pin 16 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 15. "ED15,Pin 15 edge detection select" "Any change,Falling"
bitfld.long 0x14 11. "ED11,Pin 11 edge detection select" "Any change,Falling"
bitfld.long 0x14 10. "ED10,Pin 10 edge detection select" "Any change,Falling"
bitfld.long 0x14 7. "ED7,Pin 7 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 6. "ED6,Pin 6 edge detection select" "Any change,Falling"
bitfld.long 0x14 3. "ED3,Pin 3 edge detection select" "Any change,Falling"
bitfld.long 0x14 2. "ED2,Pin 2 edge detection select" "Any change,Falling"
tree.end
tree "GPIO_2"
base ad:0x02310000
group.long 0x00++0x17
line.long 0x00 "GPDIR,GPIO Direction Register"
bitfld.long 0x00 31. "DR31,Pin 31 direction select" "Input,Output"
bitfld.long 0x00 30. "DR30,Pin 30 direction select" "Input,Output"
bitfld.long 0x00 29. "DR29,Pin 29 direction select" "Input,Output"
bitfld.long 0x00 28. "DR28,Pin 28 direction select" "Input,Output"
newline
bitfld.long 0x00 27. "DR27,Pin 27 direction select" "Input,Output"
bitfld.long 0x00 26. "DR26,Pin 26 direction select" "Input,Output"
bitfld.long 0x00 25. "DR25,Pin 25 direction select" "Input,Output"
bitfld.long 0x00 24. "DR24,Pin 24 direction select" "Input,Output"
newline
bitfld.long 0x00 23. "DR23,Pin 23 direction select" "Input,Output"
bitfld.long 0x00 22. "DR22,Pin 22 direction select" "Input,Output"
bitfld.long 0x00 21. "DR21,Pin 21 direction select" "Input,Output"
bitfld.long 0x00 20. "DR20,Pin 20 direction select" "Input,Output"
newline
bitfld.long 0x00 19. "DR19,Pin 19 direction select" "Input,Output"
bitfld.long 0x00 18. "DR18,Pin 18 direction select" "Input,Output"
bitfld.long 0x00 17. "DR17,Pin 17 direction select" "Input,Output"
bitfld.long 0x00 16. "DR16,Pin 16 direction select" "Input,Output"
newline
bitfld.long 0x00 15. "DR15,Pin 15 direction select" "Input,Output"
bitfld.long 0x00 14. "DR14,Pin 14 direction select" "Input,Output"
bitfld.long 0x00 13. "DR13,Pin 13 direction select" "Input,Output"
bitfld.long 0x00 12. "DR12,Pin 12 direction select" "Input,Output"
newline
bitfld.long 0x00 11. "DR11,Pin 11 direction select" "Input,Output"
bitfld.long 0x00 10. "DR10,Pin 10 direction select" "Input,Output"
bitfld.long 0x00 9. "DR9,Pin 9 direction select" "Input,Output"
bitfld.long 0x00 8. "DR8,Pin 8 direction select" "Input,Output"
newline
bitfld.long 0x00 7. "DR7,Pin 7 direction select" "Input,Output"
bitfld.long 0x00 6. "DR6,Pin 6 direction select" "Input,Output"
line.long 0x04 "GPODR,GPIO Open Drain Register"
bitfld.long 0x04 31. "OD31,Pin 31 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 30. "OD30,Pin 30 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 29. "OD29,Pin 29 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 28. "OD28,Pin 28 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 27. "OD27,Pin 27 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 26. "OD26,Pin 26 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 25. "OD25,Pin 25 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 24. "OD24,Pin 24 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 23. "OD23,Pin 23 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 22. "OD22,Pin 22 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 21. "OD21,Pin 21 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 20. "OD20,Pin 20 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 19. "OD19,Pin 19 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 18. "OD18,Pin 18 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 17. "OD17,Pin 17 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 16. "OD16,Pin 16 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 15. "OD15,Pin 15 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 14. "OD14,Pin 14 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 13. "OD13,Pin 13 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 12. "OD12,Pin 12 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 11. "OD11,Pin 11 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 10. "OD10,Pin 10 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 9. "OD9,Pin 9 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 8. "OD8,Pin 8 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 7. "OD7,Pin 7 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 6. "OD6,Pin 6 open-drain configuration" "Actively driven,Open-drain"
line.long 0x08 "GPDAT,GPIO Data Register"
bitfld.long 0x08 31. "D31,Pin 31 data" "Low,High"
bitfld.long 0x08 30. "D30,Pin 30 data" "Low,High"
bitfld.long 0x08 29. "D29,Pin 29 data" "Low,High"
bitfld.long 0x08 28. "D28,Pin 28 data" "Low,High"
newline
bitfld.long 0x08 27. "D27,Pin 27 data" "Low,High"
bitfld.long 0x08 26. "D26,Pin 26 data" "Low,High"
bitfld.long 0x08 25. "D25,Pin 25 data" "Low,High"
bitfld.long 0x08 24. "D24,Pin 24 data" "Low,High"
newline
bitfld.long 0x08 23. "D23,Pin 23 data" "Low,High"
bitfld.long 0x08 22. "D22,Pin 22 data" "Low,High"
bitfld.long 0x08 21. "D21,Pin 21 data" "Low,High"
bitfld.long 0x08 20. "D20,Pin 20 data" "Low,High"
newline
bitfld.long 0x08 19. "D19,Pin 19 data" "Low,High"
bitfld.long 0x08 18. "D18,Pin 18 data" "Low,High"
bitfld.long 0x08 17. "D17,Pin 17 data" "Low,High"
bitfld.long 0x08 16. "D16,Pin 16 data" "Low,High"
newline
bitfld.long 0x08 15. "D15,Pin 15 data" "Low,High"
bitfld.long 0x08 14. "D14,Pin 14 data" "Low,High"
bitfld.long 0x08 13. "D13,Pin 13 data" "Low,High"
bitfld.long 0x08 12. "D12,Pin 12 data" "Low,High"
newline
bitfld.long 0x08 11. "D11,Pin 11 data" "Low,High"
bitfld.long 0x08 10. "D10,Pin 10 data" "Low,High"
bitfld.long 0x08 9. "D9,Pin 9 data" "Low,High"
bitfld.long 0x08 8. "D8,Pin 8 data" "Low,High"
newline
bitfld.long 0x08 7. "D7,Pin 7 data" "Low,High"
bitfld.long 0x08 6. "D6,Pin 6 data" "Low,High"
line.long 0x0C "GPIER,GPIO Interrupt Event Register"
eventfld.long 0x0C 31. "EV31,Pin 31 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 30. "EV30,Pin 30 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 29. "EV29,Pin 29 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 28. "EV28,Pin 28 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 27. "EV27,Pin 27 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 26. "EV26,Pin 26 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 25. "EV25,Pin 25 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 24. "EV24,Pin 24 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 23. "EV23,Pin 23 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 22. "EV22,Pin 22 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 21. "EV21,Pin 21 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 20. "EV20,Pin 20 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 19. "EV19,Pin 19 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 18. "EV18,Pin 18 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 17. "EV17,Pin 17 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 16. "EV16,Pin 16 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 15. "EV15,Pin 15 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 14. "EV14,Pin 14 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 13. "EV13,Pin 13 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 12. "EV12,Pin 12 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 11. "EV11,Pin 11 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 10. "EV10,Pin 10 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 9. "EV9,Pin 9 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 8. "EV8,Pin 8 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 7. "EV7,Pin 7 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 6. "EV6,Pin 6 interrupt event status" "No interrupt,Interrupt"
line.long 0x10 "GPIMR,GPIO Interrupt Mask Register"
bitfld.long 0x10 31. "IM31,Pin 31 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 30. "IM30,Pin 30 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 29. "IM29,Pin 29 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 28. "IM28,Pin 28 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 27. "IM27,Pin 27 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 26. "IM26,Pin 26 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 25. "IM25,Pin 25 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 24. "IM24,Pin 24 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 23. "IM23,Pin 23 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 22. "IM22,Pin 22 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 21. "IM21,Pin 21 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 20. "IM20,Pin 20 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 19. "IM19,Pin 19 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 18. "IM18,Pin 18 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 17. "IM17,Pin 17 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 16. "IM16,Pin 16 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 15. "IM15,Pin 15 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 14. "IM14,Pin 14 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 13. "IM13,Pin 13 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 12. "IM12,Pin 12 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 11. "IM11,Pin 11 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 10. "IM10,Pin 10 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 9. "IM9,Pin 9 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 8. "IM8,Pin 8 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 7. "IM7,Pin 7 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 6. "IM6,Pin 6 interrupt mask" "Masked,Not masked"
line.long 0x14 "GPICR,GPIO Interrupt Control Register"
bitfld.long 0x14 31. "ED31,Pin 31 edge detection select" "Any change,Falling"
bitfld.long 0x14 30. "ED30,Pin 30 edge detection select" "Any change,Falling"
bitfld.long 0x14 29. "ED29,Pin 29 edge detection select" "Any change,Falling"
bitfld.long 0x14 28. "ED28,Pin 28 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 27. "ED27,Pin 27 edge detection select" "Any change,Falling"
bitfld.long 0x14 26. "ED26,Pin 26 edge detection select" "Any change,Falling"
bitfld.long 0x14 25. "ED25,Pin 25 edge detection select" "Any change,Falling"
bitfld.long 0x14 24. "ED24,Pin 24 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 23. "ED23,Pin 23 edge detection select" "Any change,Falling"
bitfld.long 0x14 22. "ED22,Pin 22 edge detection select" "Any change,Falling"
bitfld.long 0x14 21. "ED21,Pin 21 edge detection select" "Any change,Falling"
bitfld.long 0x14 20. "ED20,Pin 20 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 19. "ED19,Pin 19 edge detection select" "Any change,Falling"
bitfld.long 0x14 18. "ED18,Pin 18 edge detection select" "Any change,Falling"
bitfld.long 0x14 17. "ED17,Pin 17 edge detection select" "Any change,Falling"
bitfld.long 0x14 16. "ED16,Pin 16 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 15. "ED15,Pin 15 edge detection select" "Any change,Falling"
bitfld.long 0x14 14. "ED14,Pin 14 edge detection select" "Any change,Falling"
bitfld.long 0x14 13. "ED13,Pin 13 edge detection select" "Any change,Falling"
bitfld.long 0x14 12. "ED12,Pin 12 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 11. "ED11,Pin 11 edge detection select" "Any change,Falling"
bitfld.long 0x14 10. "ED10,Pin 10 edge detection select" "Any change,Falling"
bitfld.long 0x14 9. "ED9,Pin 9 edge detection select" "Any change,Falling"
bitfld.long 0x14 8. "ED8,Pin 8 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 7. "ED7,Pin 7 edge detection select" "Any change,Falling"
bitfld.long 0x14 6. "ED6,Pin 6 edge detection select" "Any change,Falling"
tree.end
tree "GPIO_3"
base ad:0x02320000
group.long 0x00++0x17
line.long 0x00 "GPDIR,GPIO Direction Register"
bitfld.long 0x00 18. "DR18,Pin 18 direction select" "Input,Output"
bitfld.long 0x00 17. "DR17,Pin 17 direction select" "Input,Output"
bitfld.long 0x00 16. "DR16,Pin 16 direction select" "Input,Output"
bitfld.long 0x00 15. "DR15,Pin 15 direction select" "Input,Output"
newline
bitfld.long 0x00 14. "DR14,Pin 14 direction select" "Input,Output"
bitfld.long 0x00 13. "DR13,Pin 13 direction select" "Input,Output"
bitfld.long 0x00 12. "DR12,Pin 12 direction select" "Input,Output"
bitfld.long 0x00 11. "DR11,Pin 11 direction select" "Input,Output"
newline
bitfld.long 0x00 10. "DR10,Pin 10 direction select" "Input,Output"
bitfld.long 0x00 9. "DR9,Pin 9 direction select" "Input,Output"
bitfld.long 0x00 8. "DR8,Pin 8 direction select" "Input,Output"
bitfld.long 0x00 7. "DR7,Pin 7 direction select" "Input,Output"
newline
bitfld.long 0x00 6. "DR6,Pin 6 direction select" "Input,Output"
bitfld.long 0x00 5. "DR5,Pin 5 direction select" "Input,Output"
bitfld.long 0x00 4. "DR4,Pin 4 direction select" "Input,Output"
bitfld.long 0x00 3. "DR3,Pin 3 direction select" "Input,Output"
newline
bitfld.long 0x00 2. "DR2,Pin 2 direction select" "Input,Output"
bitfld.long 0x00 1. "DR1,Pin 1 direction select" "Input,Output"
bitfld.long 0x00 0. "DR0,Pin 0 direction select" "Input,Output"
line.long 0x04 "GPODR,GPIO Open Drain Register"
bitfld.long 0x04 18. "OD18,Pin 18 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 17. "OD17,Pin 17 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 16. "OD16,Pin 16 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 15. "OD15,Pin 15 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 14. "OD14,Pin 14 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 13. "OD13,Pin 13 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 12. "OD12,Pin 12 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 11. "OD11,Pin 11 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 10. "OD10,Pin 10 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 9. "OD9,Pin 9 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 8. "OD8,Pin 8 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 7. "OD7,Pin 7 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 6. "OD6,Pin 6 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 6. "OD5,Pin 5 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 6. "OD4,Pin 4 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 6. "OD3,Pin 3 open-drain configuration" "Actively driven,Open-drain"
newline
bitfld.long 0x04 6. "OD2,Pin 2 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 6. "OD1,Pin 1 open-drain configuration" "Actively driven,Open-drain"
bitfld.long 0x04 6. "OD0,Pin 0 open-drain configuration" "Actively driven,Open-drain"
line.long 0x08 "GPDAT,GPIO Data Register"
bitfld.long 0x08 18. "D18,Pin 18 data" "Low,High"
bitfld.long 0x08 17. "D17,Pin 17 data" "Low,High"
bitfld.long 0x08 16. "D16,Pin 16 data" "Low,High"
bitfld.long 0x08 15. "D15,Pin 15 data" "Low,High"
newline
bitfld.long 0x08 14. "D14,Pin 14 data" "Low,High"
bitfld.long 0x08 13. "D13,Pin 13 data" "Low,High"
bitfld.long 0x08 12. "D12,Pin 12 data" "Low,High"
bitfld.long 0x08 11. "D11,Pin 11 data" "Low,High"
newline
bitfld.long 0x08 10. "D10,Pin 10 data" "Low,High"
bitfld.long 0x08 9. "D9,Pin 9 data" "Low,High"
bitfld.long 0x08 8. "D8,Pin 8 data" "Low,High"
bitfld.long 0x08 7. "D7,Pin 7 data" "Low,High"
newline
bitfld.long 0x08 6. "D6,Pin 6 data" "Low,High"
bitfld.long 0x08 5. "D5,Pin 5 data" "Low,High"
bitfld.long 0x08 4. "D4,Pin 4 data" "Low,High"
bitfld.long 0x08 3. "D3,Pin 3 data" "Low,High"
newline
bitfld.long 0x08 2. "D2,Pin 2 data" "Low,High"
bitfld.long 0x08 1. "D1,Pin 1 data" "Low,High"
bitfld.long 0x08 0. "D0,Pin 0 data" "Low,High"
line.long 0x0C "GPIER,GPIO Interrupt Event Register"
eventfld.long 0x0C 18. "EV18,Pin 18 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 17. "EV17,Pin 17 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 16. "EV16,Pin 16 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 15. "EV15,Pin 15 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 14. "EV14,Pin 14 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 13. "EV13,Pin 13 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 12. "EV12,Pin 12 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 11. "EV11,Pin 11 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 10. "EV10,Pin 10 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 9. "EV9,Pin 9 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 8. "EV8,Pin 8 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 7. "EV7,Pin 7 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 6. "EV6,Pin 6 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 5. "EV5,Pin 5 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 4. "EV4,Pin 4 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 3. "EV3,Pin 3 interrupt event status" "No interrupt,Interrupt"
newline
eventfld.long 0x0C 2. "EV2,Pin 2 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 1. "EV1,Pin 1 interrupt event status" "No interrupt,Interrupt"
eventfld.long 0x0C 0. "EV0,Pin 0 interrupt event status" "No interrupt,Interrupt"
line.long 0x10 "GPIMR,GPIO Interrupt Mask Register"
bitfld.long 0x10 18. "IM18,Pin 18 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 17. "IM17,Pin 17 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 16. "IM16,Pin 16 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 15. "IM15,Pin 15 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 14. "IM14,Pin 14 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 13. "IM13,Pin 13 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 12. "IM12,Pin 12 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 11. "IM11,Pin 11 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 10. "IM10,Pin 10 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 9. "IM9,Pin 9 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 8. "IM8,Pin 8 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 7. "IM7,Pin 7 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 6. "IM6,Pin 6 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 5. "IM5,Pin 5 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 4. "IM4,Pin 4 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 3. "IM3,Pin 3 interrupt mask" "Masked,Not masked"
newline
bitfld.long 0x10 2. "IM2,Pin 2 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 1. "IM1,Pin 1 interrupt mask" "Masked,Not masked"
bitfld.long 0x10 0. "IM0,Pin 0 interrupt mask" "Masked,Not masked"
line.long 0x14 "GPICR,GPIO Interrupt Control Register"
bitfld.long 0x14 18. "ED18,Pin 18 edge detection select" "Any change,Falling"
bitfld.long 0x14 17. "ED17,Pin 17 edge detection select" "Any change,Falling"
bitfld.long 0x14 16. "ED16,Pin 16 edge detection select" "Any change,Falling"
bitfld.long 0x14 15. "ED15,Pin 15 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 14. "ED14,Pin 14 edge detection select" "Any change,Falling"
bitfld.long 0x14 13. "ED13,Pin 13 edge detection select" "Any change,Falling"
bitfld.long 0x14 12. "ED12,Pin 12 edge detection select" "Any change,Falling"
bitfld.long 0x14 11. "ED11,Pin 11 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 10. "ED10,Pin 10 edge detection select" "Any change,Falling"
bitfld.long 0x14 9. "ED9,Pin 9 edge detection select" "Any change,Falling"
bitfld.long 0x14 8. "ED8,Pin 8 edge detection select" "Any change,Falling"
bitfld.long 0x14 7. "ED7,Pin 7 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 6. "ED6,Pin 6 edge detection select" "Any change,Falling"
bitfld.long 0x14 5. "ED5,Pin 5 edge detection select" "Any change,Falling"
bitfld.long 0x14 4. "ED4,Pin 4 edge detection select" "Any change,Falling"
bitfld.long 0x14 3. "ED3,Pin 3 edge detection select" "Any change,Falling"
newline
bitfld.long 0x14 2. "ED2,Pin 2 edge detection select" "Any change,Falling"
bitfld.long 0x14 1. "ED1,Pin 1 edge detection select" "Any change,Falling"
bitfld.long 0x14 0. "ED0,Pin 0 edge detection select" "Any change,Falling"
tree.end
tree.end
tree "I2C (Inter-Integrated Circuit)"
repeat 8. (increment ad:0x2000000 0x10000)(increment 1. 1.)
tree "I2C$2"
base $1
group.byte 0x00++0x06
line.byte 0x00 "IBAD,I2C Bus Address Register"
hexmask.byte 0x00 1.--7. 0x02 "ADR,Slave address"
line.byte 0x01 "IBFD,I2C Bus Frequency Divider Register"
line.byte 0x02 "IBCR,I2C Bus Control Register"
bitfld.byte 0x02 7. "MDIS,Module disable" "No,Yes"
bitfld.byte 0x02 6. "IBIE,I2C bus interrupt enable" "Disabled,Enabled"
bitfld.byte 0x02 5. "MSSL,Master/slave mode select" "Slave,Master"
bitfld.byte 0x02 4. "TXRX,Transmit/receive mode select" "Receive,Transmit"
bitfld.byte 0x02 3. "NOACK,Data acknowledge disable" "No,Yes"
bitfld.byte 0x02 2. "RSTA,Repeat START" "No effect,Repeated"
newline
bitfld.byte 0x02 1. "DMAEN,DMA enable" "Disabled,Enabled"
bitfld.byte 0x02 0. "IBDOZE,I2C bus interface stop in DOZE mode" "No effect,Stopped"
line.byte 0x03 "IBSR,I2C Bus Status Register"
rbitfld.byte 0x03 7. "TCF,Transfer complete" "In progress,Completed"
rbitfld.byte 0x03 6. "IAAS,Addressed as a slave" "Not addressed,As a slave"
rbitfld.byte 0x03 5. "IBB,Bus busy" "Idle,Busy"
eventfld.byte 0x03 4. "IBAL,Arbitration lost" "Not occurred,Occurred"
rbitfld.byte 0x03 2. "SRW,Slave read/write" "Read,Write"
eventfld.byte 0x03 1. "IBIF,I2C bus interrupt flag" "Not occurred,Occurred"
newline
rbitfld.byte 0x03 0. "RXAK,Received acknowledge" "Received,Not received"
line.byte 0x04 "IBDR,I2C Bus Data I/O Register"
line.byte 0x05 "IBIC,I2C Bus Interrupt Config Register"
bitfld.byte 0x05 7. "BIIE,Bus idle interrupt enable" "Disabled,Enabled"
bitfld.byte 0x05 6. "BYTERXIE,Byte receive interrupt enable" "Disabled,Enabled"
line.byte 0x06 "IBDBG,I2C Bus Debug Register"
bitfld.byte 0x06 3. "GLFLT_EN,Glitch filter enable" "Disabled,Enabled"
rbitfld.byte 0x06 1. "IPG_DEBUG_HALTED,Debug halted" "Not halted,Halted"
bitfld.byte 0x06 0. "IPG_DEBUG_EN,Debug enable" "Disabled,Enabled"
tree.end
repeat.end
tree.end
tree "SAI (Synchronous Audio Interface)"
repeat 6. (increment ad:0xF100000 0x10000)(increment 1. 1.)
tree "SAI$2"
base $1
group.long 0x00++0x17
line.long 0x00 "TCSR,SAI Transmit Control Register"
bitfld.long 0x00 31. "TE,Transmitter enable" "Disabled,Enabled"
bitfld.long 0x00 28. "BCE,Bit clock enable" "Disabled,Enabled"
bitfld.long 0x00 25. "FR,FIFO reset" "No effect,Reset"
bitfld.long 0x00 24. "SR,Software reset" "No effect,Reset"
newline
eventfld.long 0x00 20. "WSF,Word start flag" "Not occurred,Occurred"
eventfld.long 0x00 19. "SEF,Sync error flag" "Not occurred,Occurred"
eventfld.long 0x00 18. "FEF,FIFO error flag" "Not occurred,Occurred"
rbitfld.long 0x00 17. "FWF,FIFO warning flag" "Not occurred,Occurred"
newline
rbitfld.long 0x00 16. "FRF,FIFO request flag" "Not occurred,Occurred"
bitfld.long 0x00 12. "WSIE,Word start interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SEIE,Sync error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 10. "FEIE,FIFO error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "FWIE,FIFO warning interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "FRIE,FIFO request interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "FWDE,FIFO warning DMA enable" "Disabled,Enabled"
bitfld.long 0x00 0. "FRDE,FIFO request DMA enable" "Disabled,Enabled"
line.long 0x04 "TCR1,SAI Transmit Configuration 1 Register"
bitfld.long 0x04 0.--4. "TFW,Transmit FIFO watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x08 "TCR2,SAI Transmit Configuration 2 Register"
bitfld.long 0x08 30.--31. "SYNC,Synchronous mode" "Asynchronous,Synchronous,?..."
bitfld.long 0x08 29. "BCS,Bit clock swap" "Not swapped,Swapped"
bitfld.long 0x08 28. "BCI,Bit clock input" "No effect,Clocked"
bitfld.long 0x08 26.--27. "MSEL,MCLK select" "MCLK 1,MCLK 1,MCLK 2,MCLK 3"
newline
bitfld.long 0x08 25. "BCP,Bit clock polarity" "Active high,Active low"
bitfld.long 0x08 24. "BCD,Bit clock direction" "External-slave,Internal-master"
hexmask.long.byte 0x08 0.--7. 1. "DIV,Bit clock divide"
line.long 0x0C "TCR3,SAI Transmit Configuration 3 Register"
bitfld.long 0x0C 16. "TCE,Transmit channel enable" "Disabled,Enabled"
bitfld.long 0x0C 0.--4. "WDFL,Word flag configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x10 "TCR4,SAI Transmit Configuration 4 Register"
bitfld.long 0x10 16.--20. "FRSZ,Frame size" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32"
bitfld.long 0x10 8.--12. "SYWD,Sync width" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32"
bitfld.long 0x10 4. "MF,MSB first" "LSB first,MSB first"
bitfld.long 0x10 3. "FSE,Frame sync early" "Disabled,Enabled"
newline
bitfld.long 0x10 1. "FSP,Frame sync polarity" "Active high,Active low"
bitfld.long 0x10 0. "FSD,Frame sync direction" "External-slave,Internal-master"
line.long 0x14 "TCR5,SAI Transmit Configuration 5 Register"
bitfld.long 0x14 24.--28. "WNW,Word N width" ",,,,,,,,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 16.--20. "W0W,Word 0 width" ",,,,,,,,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 8.--12. "FBT,First bit shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
wgroup.long 0x20++0x03
line.long 0x00 "TDR0,SAI Transmit Data Register"
rgroup.long 0x40++0x03
line.long 0x00 "TFR0,SAI Transmit FIFO Register 0"
hexmask.long.byte 0x00 16.--21. 0x01 "WFP,Write FIFO pointer"
hexmask.long.byte 0x00 0.--5. 0x01 "RFP,Read FIFO pointer"
group.long 0x60++0x03
line.long 0x00 "TMR,SAI Transmit Mask Register"
bitfld.long 0x00 31. "TWM[31],Transmit word mask 31" "0,1"
bitfld.long 0x00 30. "[30],Transmit word mask 30" "0,1"
bitfld.long 0x00 29. "[29],Transmit word mask 29" "0,1"
bitfld.long 0x00 28. "[28],Transmit word mask 28" "0,1"
newline
bitfld.long 0x00 27. "[27],Transmit word mask 27" "0,1"
bitfld.long 0x00 26. "[26],Transmit word mask 26" "0,1"
bitfld.long 0x00 25. "[25],Transmit word mask 25" "0,1"
bitfld.long 0x00 24. "[24],Transmit word mask 24" "0,1"
newline
bitfld.long 0x00 23. "[23],Transmit word mask 23" "0,1"
bitfld.long 0x00 22. "[22],Transmit word mask 22" "0,1"
bitfld.long 0x00 21. "[21],Transmit word mask 21" "0,1"
bitfld.long 0x00 20. "[20],Transmit word mask 20" "0,1"
newline
bitfld.long 0x00 19. "[19],Transmit word mask 19" "0,1"
bitfld.long 0x00 18. "[18],Transmit word mask 18" "0,1"
bitfld.long 0x00 17. "[17],Transmit word mask 17" "0,1"
bitfld.long 0x00 16. "[16],Transmit word mask 16" "0,1"
newline
bitfld.long 0x00 15. "[15],Transmit word mask 15" "0,1"
bitfld.long 0x00 14. "[14],Transmit word mask 14" "0,1"
bitfld.long 0x00 13. "[13],Transmit word mask 13" "0,1"
bitfld.long 0x00 12. "[12],Transmit word mask 12" "0,1"
newline
bitfld.long 0x00 11. "[11],Transmit word mask 11" "0,1"
bitfld.long 0x00 10. "[10],Transmit word mask 10" "0,1"
bitfld.long 0x00 9. "[9],Transmit word mask 9" "0,1"
bitfld.long 0x00 8. "[8],Transmit word mask 8" "0,1"
newline
bitfld.long 0x00 7. "[7],Transmit word mask 7" "0,1"
bitfld.long 0x00 6. "[6],Transmit word mask 6" "0,1"
bitfld.long 0x00 5. "[5],Transmit word mask 5" "0,1"
bitfld.long 0x00 4. "[4],Transmit word mask 4" "0,1"
newline
bitfld.long 0x00 3. "[3],Transmit word mask 3" "0,1"
bitfld.long 0x00 2. "[2],Transmit word mask 2" "0,1"
bitfld.long 0x00 1. "[1],Transmit word mask 1" "0,1"
bitfld.long 0x00 0. "[0],Transmit word mask 0" "0,1"
group.long 0x80++0x17
line.long 0x00 "RCSR,SAI Receive Control Register"
bitfld.long 0x00 31. "RE,Receiver enable" "Disabled,Enabled"
bitfld.long 0x00 28. "BCE,Bit clock enable" "Disabled,Enabled"
bitfld.long 0x00 25. "FR,FIFO reset" "No effect,Reset"
bitfld.long 0x00 24. "SR,Software reset" "No effect,Reset"
newline
eventfld.long 0x00 20. "WSF,Word start flag" "Not occurred,Occurred"
eventfld.long 0x00 19. "SEF,Sync error flag" "Not occurred,Occurred"
eventfld.long 0x00 18. "FEF,FIFO error flag" "Not occurred,Occurred"
rbitfld.long 0x00 17. "FWF,FIFO warning flag" "Not occurred,Occurred"
newline
rbitfld.long 0x00 16. "FRF,FIFO request flag" "Not occurred,Occurred"
bitfld.long 0x00 12. "WSIE,Word start interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 11. "SEIE,Sync error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 10. "FEIE,FIFO error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "FWIE,FIFO warning interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "FRIE,FIFO request interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 1. "FWDE,FIFO warning DMA enable" "Disabled,Enabled"
bitfld.long 0x00 0. "FRDE,FIFO request DMA enable" "Disabled,Enabled"
line.long 0x04 "RCR1,SAI Receive Configuration 1 Register"
bitfld.long 0x04 0.--4. "RFW,Receive FIFO watermark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x08 "RCR2,SAI Receive Configuration 2 Register"
bitfld.long 0x08 30.--31. "SYNC,Synchronous mode" "Asynchronous,Synchronous,?..."
bitfld.long 0x08 29. "BCS,Bit clock swap" "Not swapped,Swapped"
bitfld.long 0x08 28. "BCI,Bit clock input" "No effect,Clocked like external"
bitfld.long 0x08 26.--27. "MSEL,MCLK select" "Bus clock,MCLK 1,MCLK 2,MCLK 3"
newline
bitfld.long 0x08 25. "BCP,Bit clock polarity" "Active high,Active low"
bitfld.long 0x08 24. "BCD,Bit clock direction" "External-slave,Internal-master"
hexmask.long.byte 0x08 0.--7. 1. "DIV,Bit clock divide"
line.long 0x0C "RCR3,SAI Receive Configuration 3 Register"
bitfld.long 0x0C 16. "RCE,Receive channel enable" "Disabled,Enabled"
bitfld.long 0x0C 0.--4. "WDFL,Word flag configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x10 "RCR4,SAI Receive Configuration 4 Register"
bitfld.long 0x10 16.--20. "FRSZ,Frame size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x10 8.--12. "SYWD,Sync width" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32"
bitfld.long 0x10 4. "MF,MSB first" "LSB first,MSB first"
bitfld.long 0x10 3. "FSE,Frame sync early" "Not early,Early"
newline
bitfld.long 0x10 1. "FSP,Frame sync polarity" "Active high,Active low"
bitfld.long 0x10 0. "FSD,Frame sync direction" "External-slave,Internal-master"
line.long 0x14 "RCR5,SAI Receive Configuration 5 Register"
bitfld.long 0x14 24.--28. "WNW,Word N width" ",,,,,,,,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 16.--20. "W0W,Word 0 width" ",,,,,,,,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x14 8.--12. "FBT,First bit shifted" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0xA0++0x03
line.long 0x00 "RDR0,SAI Receive Data Register"
rgroup.long 0xC0++0x03
line.long 0x00 "RFR0,SAI Receive FIFO Register"
bitfld.long 0x00 16.--21. "WFP,Write FIFO pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--5. "RFP,Read FIFO pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0xE0++0x03
line.long 0x00 "RMR,SAI Receive Mask Register"
bitfld.long 0x00 31. "RWM[31],Receive word mask 31" "0,1"
bitfld.long 0x00 30. "[30],Receive word mask 30" "0,1"
bitfld.long 0x00 29. "[29],Receive word mask 29" "0,1"
bitfld.long 0x00 28. "[28],Receive word mask 28" "0,1"
newline
bitfld.long 0x00 27. "[27],Receive word mask 27" "0,1"
bitfld.long 0x00 26. "[26],Receive word mask 26" "0,1"
bitfld.long 0x00 25. "[25],Receive word mask 25" "0,1"
bitfld.long 0x00 24. "[24],Receive word mask 24" "0,1"
newline
bitfld.long 0x00 23. "[23],Receive word mask 23" "0,1"
bitfld.long 0x00 22. "[22],Receive word mask 22" "0,1"
bitfld.long 0x00 21. "[21],Receive word mask 21" "0,1"
bitfld.long 0x00 20. "[20],Receive word mask 20" "0,1"
newline
bitfld.long 0x00 19. "[19],Receive word mask 19" "0,1"
bitfld.long 0x00 18. "[18],Receive word mask 18" "0,1"
bitfld.long 0x00 17. "[17],Receive word mask 17" "0,1"
bitfld.long 0x00 16. "[16],Receive word mask 16" "0,1"
newline
bitfld.long 0x00 15. "[15],Receive word mask 15" "0,1"
bitfld.long 0x00 14. "[14],Receive word mask 14" "0,1"
bitfld.long 0x00 13. "[13],Receive word mask 13" "0,1"
bitfld.long 0x00 12. "[12],Receive word mask 12" "0,1"
newline
bitfld.long 0x00 11. "[11],Receive word mask 11" "0,1"
bitfld.long 0x00 10. "[10],Receive word mask 10" "0,1"
bitfld.long 0x00 9. "[9],Receive word mask 9" "0,1"
bitfld.long 0x00 8. "[8],Receive word mask 8" "0,1"
newline
bitfld.long 0x00 7. "[7],Receive word mask 7" "0,1"
bitfld.long 0x00 6. "[6],Receive word mask 6" "0,1"
bitfld.long 0x00 5. "[5],Receive word mask 5" "0,1"
bitfld.long 0x00 4. "[4],Receive word mask 4" "0,1"
newline
bitfld.long 0x00 3. "[3],Receive word mask 3" "0,1"
bitfld.long 0x00 2. "[2],Receive word mask 2" "0,1"
bitfld.long 0x00 1. "[1],Receive word mask 1" "0,1"
bitfld.long 0x00 0. "[0],Receive word mask 0" "0,1"
group.long 0x100++0x07
line.long 0x00 "MCR,SAI MCLK Control Register"
rbitfld.long 0x00 31. "DUF,Divider update flag" "Not updated,Updated on-the-fly"
bitfld.long 0x00 30. "MOE,MCLK Output Enable" "Disabled,Enabled"
bitfld.long 0x00 24.--25. "MICS,MCLK input clock select" "0,,2,3"
line.long 0x04 "MDR,SAI MCLK Divide Register"
hexmask.long.byte 0x04 12.--19. 0x01 "FRACT,MCLK Fraction"
hexmask.long.word 0x04 0.--11. 0x01 "DIVIDE,MCLK Divide"
tree.end
repeat.end
tree.end
tree "LPUART (Low Power Universal Asynchronous Receiver/Transmitter)"
tree "LPUART1"
base ad:0x2260000
if ((per.l(ad:0x2260000+0x08)&0x10)==0x00)
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "8-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Oversampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
else
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "9-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Over sampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
endif
group.long 0x04++0x07
line.long 0x00 "STAT4,Status Register"
eventfld.long 0x00 31. "LBKDIF,LIN break detect interrupt flag" "Not detected,Detected"
eventfld.long 0x00 30. "RXEDGIF,LPUART_RX pin active edge interrupt flag" "Not detected,Detected"
bitfld.long 0x00 29. "MSBF,MSB first" "LSB first,MSB first"
bitfld.long 0x00 28. "RXINV,Receive data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x00 27. "RWUID,Receive wake up idle detect enable" "Disabled,Enabled"
bitfld.long 0x00 26. "BRK13,Break character generation length" "10-13 bit,13-16 bit"
bitfld.long 0x00 25. "LBKDE,LIN break detection enable" "10-13 bit,11-15 bit"
rbitfld.long 0x00 24. "RAF,Receiver active flag" "Not active,Active"
newline
rbitfld.long 0x00 23. "TDRE,Transmit data register empty flag" "Full,Empty"
rbitfld.long 0x00 22. "TC,Transmission complete flag" "Active,Idle"
rbitfld.long 0x00 21. "RDRF,Receive data register full flag" "Empty,Full"
eventfld.long 0x00 20. "IDLE,Idle line flag" "Not detected,Detected"
newline
eventfld.long 0x00 19. "OR,Receiver overrun flag" "No overrun,Overrun"
eventfld.long 0x00 18. "NF,Noise flag" "Not detected,Detected"
eventfld.long 0x00 17. "FE,Framing error flag" "No error,Error"
eventfld.long 0x00 16. "PF,Parity error flag" "No error,Error"
line.long 0x04 "CTRL,Control Register"
bitfld.long 0x04 31. "R8T9,Receive bit 8 / Transmit bit 9" "0,1"
bitfld.long 0x04 30. "R9T8,Receive bit 9 / Transmit bit 8" "0,1"
bitfld.long 0x04 29. "TXDIR,LPUART_TX pin direction in single-wire mode" "Input,Output"
bitfld.long 0x04 28. "TXINV,Transmit data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x04 27. "ORIE,Overrun interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 26. "NEIE,Noise error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 25. "FEIE,Framing error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 24. "PEIE,Parity error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 23. "TIE,Transmit interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 22. "TCIE,Transmission complete interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 21. "RIE,Receiver interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 20. "ILIE,Idle line interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 19. "TE,Transmitter enable" "Disabled,Enabled"
bitfld.long 0x04 18. "RE,Receiver enable" "Disabled,Enabled"
bitfld.long 0x04 17. "RWU,Receiver wakeup control" "Normal operation,Standby"
bitfld.long 0x04 16. "SBK,Send break" "Normal operation,Sent"
newline
bitfld.long 0x04 7. "LOOPS,Loop mode select" "Normal operation,Loop/single-wire"
bitfld.long 0x04 6. "DOZEEN,Doze enable" "Disabled,Enabled"
bitfld.long 0x04 5. "RSRC,Receiver source select" "Internal loop back,Single-wire LPUART"
bitfld.long 0x04 4. "M,9-Bit or 8-Bit mode select" "8-bit,9-bit"
newline
bitfld.long 0x04 3. "WAKE,Receiver wakeup method select" "Idle-line,Address-mark"
bitfld.long 0x04 2. "ILT,Idle line type select" "Start bit,Stop bit"
bitfld.long 0x04 1. "PE,Parity enable" "Disabled,Enabled"
bitfld.long 0x04 0. "PT,Parity type" "Even,Odd"
newline
hgroup.long 0x0C++0x03
hide.long 0x00 "DATA,Data Register"
in
newline
group.long 0x10++0x07
line.long 0x00 "MATCH,Match Address Register"
hexmask.long.byte 0x00 16.--23. 0x01 "MA2,Match Address 2"
hexmask.long.byte 0x00 0.--7. 0x01 "MA1,Match Address 1"
line.long 0x04 "MODIR,Modem IrDA Register"
bitfld.long 0x04 18. "IREN,Infrared enable" "Disabled,Enabled"
bitfld.long 0x04 16.--17. "TNP,Transmitter narrow pulse" "1/OSR,2/OSR,3/OSR,4/OSR"
bitfld.long 0x04 3. "RXRTSE,Receiver request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 2. "TXRTSPOL,Transmitter request-to-send polarity" "Active low,Active high"
newline
bitfld.long 0x04 1. "TXRTSE,Transmitter request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 0. "TXCTSE,Transmitter clear-to-send enable" "Disabled,Enabled"
if ((per.l(ad:0x2260000+0x08)&0xC0000)==0x00)&&((per.l(ad:0x2260000+0x18)&0xC00000)==0xC00000)
group.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
rbitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
rbitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
eventfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
eventfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 15. "TXFLUSH,Transmit FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 14. "RXFLUSH,Receive FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
else
rgroup.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
bitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
newline
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
endif
if ((per.l(ad:0x2260000+0x08)&0x80000)==0x80000)
rgroup.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
hexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
hexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
else
group.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
rhexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
rhexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
endif
tree.end
tree "LPUART2"
base ad:0x2270000
if ((per.l(ad:0x2270000+0x08)&0x10)==0x00)
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "8-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Oversampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
else
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "9-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Over sampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
endif
group.long 0x04++0x07
line.long 0x00 "STAT4,Status Register"
eventfld.long 0x00 31. "LBKDIF,LIN break detect interrupt flag" "Not detected,Detected"
eventfld.long 0x00 30. "RXEDGIF,LPUART_RX pin active edge interrupt flag" "Not detected,Detected"
bitfld.long 0x00 29. "MSBF,MSB first" "LSB first,MSB first"
bitfld.long 0x00 28. "RXINV,Receive data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x00 27. "RWUID,Receive wake up idle detect enable" "Disabled,Enabled"
bitfld.long 0x00 26. "BRK13,Break character generation length" "10-13 bit,13-16 bit"
bitfld.long 0x00 25. "LBKDE,LIN break detection enable" "10-13 bit,11-15 bit"
rbitfld.long 0x00 24. "RAF,Receiver active flag" "Not active,Active"
newline
rbitfld.long 0x00 23. "TDRE,Transmit data register empty flag" "Full,Empty"
rbitfld.long 0x00 22. "TC,Transmission complete flag" "Active,Idle"
rbitfld.long 0x00 21. "RDRF,Receive data register full flag" "Empty,Full"
eventfld.long 0x00 20. "IDLE,Idle line flag" "Not detected,Detected"
newline
eventfld.long 0x00 19. "OR,Receiver overrun flag" "No overrun,Overrun"
eventfld.long 0x00 18. "NF,Noise flag" "Not detected,Detected"
eventfld.long 0x00 17. "FE,Framing error flag" "No error,Error"
eventfld.long 0x00 16. "PF,Parity error flag" "No error,Error"
line.long 0x04 "CTRL,Control Register"
bitfld.long 0x04 31. "R8T9,Receive bit 8 / Transmit bit 9" "0,1"
bitfld.long 0x04 30. "R9T8,Receive bit 9 / Transmit bit 8" "0,1"
bitfld.long 0x04 29. "TXDIR,LPUART_TX pin direction in single-wire mode" "Input,Output"
bitfld.long 0x04 28. "TXINV,Transmit data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x04 27. "ORIE,Overrun interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 26. "NEIE,Noise error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 25. "FEIE,Framing error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 24. "PEIE,Parity error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 23. "TIE,Transmit interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 22. "TCIE,Transmission complete interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 21. "RIE,Receiver interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 20. "ILIE,Idle line interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 19. "TE,Transmitter enable" "Disabled,Enabled"
bitfld.long 0x04 18. "RE,Receiver enable" "Disabled,Enabled"
bitfld.long 0x04 17. "RWU,Receiver wakeup control" "Normal operation,Standby"
bitfld.long 0x04 16. "SBK,Send break" "Normal operation,Sent"
newline
bitfld.long 0x04 7. "LOOPS,Loop mode select" "Normal operation,Loop/single-wire"
bitfld.long 0x04 6. "DOZEEN,Doze enable" "Disabled,Enabled"
bitfld.long 0x04 5. "RSRC,Receiver source select" "Internal loop back,Single-wire LPUART"
bitfld.long 0x04 4. "M,9-Bit or 8-Bit mode select" "8-bit,9-bit"
newline
bitfld.long 0x04 3. "WAKE,Receiver wakeup method select" "Idle-line,Address-mark"
bitfld.long 0x04 2. "ILT,Idle line type select" "Start bit,Stop bit"
bitfld.long 0x04 1. "PE,Parity enable" "Disabled,Enabled"
bitfld.long 0x04 0. "PT,Parity type" "Even,Odd"
newline
hgroup.long 0x0C++0x03
hide.long 0x00 "DATA,Data Register"
in
newline
group.long 0x10++0x07
line.long 0x00 "MATCH,Match Address Register"
hexmask.long.byte 0x00 16.--23. 0x01 "MA2,Match Address 2"
hexmask.long.byte 0x00 0.--7. 0x01 "MA1,Match Address 1"
line.long 0x04 "MODIR,Modem IrDA Register"
bitfld.long 0x04 18. "IREN,Infrared enable" "Disabled,Enabled"
bitfld.long 0x04 16.--17. "TNP,Transmitter narrow pulse" "1/OSR,2/OSR,3/OSR,4/OSR"
bitfld.long 0x04 3. "RXRTSE,Receiver request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 2. "TXRTSPOL,Transmitter request-to-send polarity" "Active low,Active high"
newline
bitfld.long 0x04 1. "TXRTSE,Transmitter request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 0. "TXCTSE,Transmitter clear-to-send enable" "Disabled,Enabled"
if ((per.l(ad:0x2270000+0x08)&0xC0000)==0x00)&&((per.l(ad:0x2270000+0x18)&0xC00000)==0xC00000)
group.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
rbitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
rbitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
eventfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
eventfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 15. "TXFLUSH,Transmit FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 14. "RXFLUSH,Receive FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
else
rgroup.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
bitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
newline
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
endif
if ((per.l(ad:0x2270000+0x08)&0x80000)==0x80000)
rgroup.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
hexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
hexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
else
group.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
rhexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
rhexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
endif
tree.end
tree "LPUART3"
base ad:0x2280000
if ((per.l(ad:0x2280000+0x08)&0x10)==0x00)
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "8-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Oversampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
else
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "9-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Over sampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
endif
group.long 0x04++0x07
line.long 0x00 "STAT4,Status Register"
eventfld.long 0x00 31. "LBKDIF,LIN break detect interrupt flag" "Not detected,Detected"
eventfld.long 0x00 30. "RXEDGIF,LPUART_RX pin active edge interrupt flag" "Not detected,Detected"
bitfld.long 0x00 29. "MSBF,MSB first" "LSB first,MSB first"
bitfld.long 0x00 28. "RXINV,Receive data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x00 27. "RWUID,Receive wake up idle detect enable" "Disabled,Enabled"
bitfld.long 0x00 26. "BRK13,Break character generation length" "10-13 bit,13-16 bit"
bitfld.long 0x00 25. "LBKDE,LIN break detection enable" "10-13 bit,11-15 bit"
rbitfld.long 0x00 24. "RAF,Receiver active flag" "Not active,Active"
newline
rbitfld.long 0x00 23. "TDRE,Transmit data register empty flag" "Full,Empty"
rbitfld.long 0x00 22. "TC,Transmission complete flag" "Active,Idle"
rbitfld.long 0x00 21. "RDRF,Receive data register full flag" "Empty,Full"
eventfld.long 0x00 20. "IDLE,Idle line flag" "Not detected,Detected"
newline
eventfld.long 0x00 19. "OR,Receiver overrun flag" "No overrun,Overrun"
eventfld.long 0x00 18. "NF,Noise flag" "Not detected,Detected"
eventfld.long 0x00 17. "FE,Framing error flag" "No error,Error"
eventfld.long 0x00 16. "PF,Parity error flag" "No error,Error"
line.long 0x04 "CTRL,Control Register"
bitfld.long 0x04 31. "R8T9,Receive bit 8 / Transmit bit 9" "0,1"
bitfld.long 0x04 30. "R9T8,Receive bit 9 / Transmit bit 8" "0,1"
bitfld.long 0x04 29. "TXDIR,LPUART_TX pin direction in single-wire mode" "Input,Output"
bitfld.long 0x04 28. "TXINV,Transmit data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x04 27. "ORIE,Overrun interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 26. "NEIE,Noise error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 25. "FEIE,Framing error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 24. "PEIE,Parity error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 23. "TIE,Transmit interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 22. "TCIE,Transmission complete interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 21. "RIE,Receiver interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 20. "ILIE,Idle line interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 19. "TE,Transmitter enable" "Disabled,Enabled"
bitfld.long 0x04 18. "RE,Receiver enable" "Disabled,Enabled"
bitfld.long 0x04 17. "RWU,Receiver wakeup control" "Normal operation,Standby"
bitfld.long 0x04 16. "SBK,Send break" "Normal operation,Sent"
newline
bitfld.long 0x04 7. "LOOPS,Loop mode select" "Normal operation,Loop/single-wire"
bitfld.long 0x04 6. "DOZEEN,Doze enable" "Disabled,Enabled"
bitfld.long 0x04 5. "RSRC,Receiver source select" "Internal loop back,Single-wire LPUART"
bitfld.long 0x04 4. "M,9-Bit or 8-Bit mode select" "8-bit,9-bit"
newline
bitfld.long 0x04 3. "WAKE,Receiver wakeup method select" "Idle-line,Address-mark"
bitfld.long 0x04 2. "ILT,Idle line type select" "Start bit,Stop bit"
bitfld.long 0x04 1. "PE,Parity enable" "Disabled,Enabled"
bitfld.long 0x04 0. "PT,Parity type" "Even,Odd"
newline
hgroup.long 0x0C++0x03
hide.long 0x00 "DATA,Data Register"
in
newline
group.long 0x10++0x07
line.long 0x00 "MATCH,Match Address Register"
hexmask.long.byte 0x00 16.--23. 0x01 "MA2,Match Address 2"
hexmask.long.byte 0x00 0.--7. 0x01 "MA1,Match Address 1"
line.long 0x04 "MODIR,Modem IrDA Register"
bitfld.long 0x04 18. "IREN,Infrared enable" "Disabled,Enabled"
bitfld.long 0x04 16.--17. "TNP,Transmitter narrow pulse" "1/OSR,2/OSR,3/OSR,4/OSR"
bitfld.long 0x04 3. "RXRTSE,Receiver request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 2. "TXRTSPOL,Transmitter request-to-send polarity" "Active low,Active high"
newline
bitfld.long 0x04 1. "TXRTSE,Transmitter request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 0. "TXCTSE,Transmitter clear-to-send enable" "Disabled,Enabled"
if ((per.l(ad:0x2280000+0x08)&0xC0000)==0x00)&&((per.l(ad:0x2280000+0x18)&0xC00000)==0xC00000)
group.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
rbitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
rbitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
eventfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
eventfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 15. "TXFLUSH,Transmit FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 14. "RXFLUSH,Receive FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
else
rgroup.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
bitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
newline
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
endif
if ((per.l(ad:0x2280000+0x08)&0x80000)==0x80000)
rgroup.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
hexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
hexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
else
group.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
rhexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
rhexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
endif
tree.end
tree "LPUART4"
base ad:0x2290000
if ((per.l(ad:0x2290000+0x08)&0x10)==0x00)
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "8-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Oversampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
else
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "9-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Over sampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
endif
group.long 0x04++0x07
line.long 0x00 "STAT4,Status Register"
eventfld.long 0x00 31. "LBKDIF,LIN break detect interrupt flag" "Not detected,Detected"
eventfld.long 0x00 30. "RXEDGIF,LPUART_RX pin active edge interrupt flag" "Not detected,Detected"
bitfld.long 0x00 29. "MSBF,MSB first" "LSB first,MSB first"
bitfld.long 0x00 28. "RXINV,Receive data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x00 27. "RWUID,Receive wake up idle detect enable" "Disabled,Enabled"
bitfld.long 0x00 26. "BRK13,Break character generation length" "10-13 bit,13-16 bit"
bitfld.long 0x00 25. "LBKDE,LIN break detection enable" "10-13 bit,11-15 bit"
rbitfld.long 0x00 24. "RAF,Receiver active flag" "Not active,Active"
newline
rbitfld.long 0x00 23. "TDRE,Transmit data register empty flag" "Full,Empty"
rbitfld.long 0x00 22. "TC,Transmission complete flag" "Active,Idle"
rbitfld.long 0x00 21. "RDRF,Receive data register full flag" "Empty,Full"
eventfld.long 0x00 20. "IDLE,Idle line flag" "Not detected,Detected"
newline
eventfld.long 0x00 19. "OR,Receiver overrun flag" "No overrun,Overrun"
eventfld.long 0x00 18. "NF,Noise flag" "Not detected,Detected"
eventfld.long 0x00 17. "FE,Framing error flag" "No error,Error"
eventfld.long 0x00 16. "PF,Parity error flag" "No error,Error"
line.long 0x04 "CTRL,Control Register"
bitfld.long 0x04 31. "R8T9,Receive bit 8 / Transmit bit 9" "0,1"
bitfld.long 0x04 30. "R9T8,Receive bit 9 / Transmit bit 8" "0,1"
bitfld.long 0x04 29. "TXDIR,LPUART_TX pin direction in single-wire mode" "Input,Output"
bitfld.long 0x04 28. "TXINV,Transmit data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x04 27. "ORIE,Overrun interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 26. "NEIE,Noise error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 25. "FEIE,Framing error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 24. "PEIE,Parity error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 23. "TIE,Transmit interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 22. "TCIE,Transmission complete interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 21. "RIE,Receiver interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 20. "ILIE,Idle line interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 19. "TE,Transmitter enable" "Disabled,Enabled"
bitfld.long 0x04 18. "RE,Receiver enable" "Disabled,Enabled"
bitfld.long 0x04 17. "RWU,Receiver wakeup control" "Normal operation,Standby"
bitfld.long 0x04 16. "SBK,Send break" "Normal operation,Sent"
newline
bitfld.long 0x04 7. "LOOPS,Loop mode select" "Normal operation,Loop/single-wire"
bitfld.long 0x04 6. "DOZEEN,Doze enable" "Disabled,Enabled"
bitfld.long 0x04 5. "RSRC,Receiver source select" "Internal loop back,Single-wire LPUART"
bitfld.long 0x04 4. "M,9-Bit or 8-Bit mode select" "8-bit,9-bit"
newline
bitfld.long 0x04 3. "WAKE,Receiver wakeup method select" "Idle-line,Address-mark"
bitfld.long 0x04 2. "ILT,Idle line type select" "Start bit,Stop bit"
bitfld.long 0x04 1. "PE,Parity enable" "Disabled,Enabled"
bitfld.long 0x04 0. "PT,Parity type" "Even,Odd"
newline
hgroup.long 0x0C++0x03
hide.long 0x00 "DATA,Data Register"
in
newline
group.long 0x10++0x07
line.long 0x00 "MATCH,Match Address Register"
hexmask.long.byte 0x00 16.--23. 0x01 "MA2,Match Address 2"
hexmask.long.byte 0x00 0.--7. 0x01 "MA1,Match Address 1"
line.long 0x04 "MODIR,Modem IrDA Register"
bitfld.long 0x04 18. "IREN,Infrared enable" "Disabled,Enabled"
bitfld.long 0x04 16.--17. "TNP,Transmitter narrow pulse" "1/OSR,2/OSR,3/OSR,4/OSR"
bitfld.long 0x04 3. "RXRTSE,Receiver request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 2. "TXRTSPOL,Transmitter request-to-send polarity" "Active low,Active high"
newline
bitfld.long 0x04 1. "TXRTSE,Transmitter request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 0. "TXCTSE,Transmitter clear-to-send enable" "Disabled,Enabled"
if ((per.l(ad:0x2290000+0x08)&0xC0000)==0x00)&&((per.l(ad:0x2290000+0x18)&0xC00000)==0xC00000)
group.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
rbitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
rbitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
eventfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
eventfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 15. "TXFLUSH,Transmit FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 14. "RXFLUSH,Receive FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
else
rgroup.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
bitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
newline
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
endif
if ((per.l(ad:0x2290000+0x08)&0x80000)==0x80000)
rgroup.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
hexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
hexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
else
group.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
rhexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
rhexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
endif
tree.end
tree "LPUART5"
base ad:0x22A0000
if ((per.l(ad:0x22A0000+0x08)&0x10)==0x00)
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "8-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Oversampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
else
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "9-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Over sampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
endif
group.long 0x04++0x07
line.long 0x00 "STAT4,Status Register"
eventfld.long 0x00 31. "LBKDIF,LIN break detect interrupt flag" "Not detected,Detected"
eventfld.long 0x00 30. "RXEDGIF,LPUART_RX pin active edge interrupt flag" "Not detected,Detected"
bitfld.long 0x00 29. "MSBF,MSB first" "LSB first,MSB first"
bitfld.long 0x00 28. "RXINV,Receive data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x00 27. "RWUID,Receive wake up idle detect enable" "Disabled,Enabled"
bitfld.long 0x00 26. "BRK13,Break character generation length" "10-13 bit,13-16 bit"
bitfld.long 0x00 25. "LBKDE,LIN break detection enable" "10-13 bit,11-15 bit"
rbitfld.long 0x00 24. "RAF,Receiver active flag" "Not active,Active"
newline
rbitfld.long 0x00 23. "TDRE,Transmit data register empty flag" "Full,Empty"
rbitfld.long 0x00 22. "TC,Transmission complete flag" "Active,Idle"
rbitfld.long 0x00 21. "RDRF,Receive data register full flag" "Empty,Full"
eventfld.long 0x00 20. "IDLE,Idle line flag" "Not detected,Detected"
newline
eventfld.long 0x00 19. "OR,Receiver overrun flag" "No overrun,Overrun"
eventfld.long 0x00 18. "NF,Noise flag" "Not detected,Detected"
eventfld.long 0x00 17. "FE,Framing error flag" "No error,Error"
eventfld.long 0x00 16. "PF,Parity error flag" "No error,Error"
line.long 0x04 "CTRL,Control Register"
bitfld.long 0x04 31. "R8T9,Receive bit 8 / Transmit bit 9" "0,1"
bitfld.long 0x04 30. "R9T8,Receive bit 9 / Transmit bit 8" "0,1"
bitfld.long 0x04 29. "TXDIR,LPUART_TX pin direction in single-wire mode" "Input,Output"
bitfld.long 0x04 28. "TXINV,Transmit data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x04 27. "ORIE,Overrun interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 26. "NEIE,Noise error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 25. "FEIE,Framing error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 24. "PEIE,Parity error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 23. "TIE,Transmit interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 22. "TCIE,Transmission complete interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 21. "RIE,Receiver interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 20. "ILIE,Idle line interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 19. "TE,Transmitter enable" "Disabled,Enabled"
bitfld.long 0x04 18. "RE,Receiver enable" "Disabled,Enabled"
bitfld.long 0x04 17. "RWU,Receiver wakeup control" "Normal operation,Standby"
bitfld.long 0x04 16. "SBK,Send break" "Normal operation,Sent"
newline
bitfld.long 0x04 7. "LOOPS,Loop mode select" "Normal operation,Loop/single-wire"
bitfld.long 0x04 6. "DOZEEN,Doze enable" "Disabled,Enabled"
bitfld.long 0x04 5. "RSRC,Receiver source select" "Internal loop back,Single-wire LPUART"
bitfld.long 0x04 4. "M,9-Bit or 8-Bit mode select" "8-bit,9-bit"
newline
bitfld.long 0x04 3. "WAKE,Receiver wakeup method select" "Idle-line,Address-mark"
bitfld.long 0x04 2. "ILT,Idle line type select" "Start bit,Stop bit"
bitfld.long 0x04 1. "PE,Parity enable" "Disabled,Enabled"
bitfld.long 0x04 0. "PT,Parity type" "Even,Odd"
newline
hgroup.long 0x0C++0x03
hide.long 0x00 "DATA,Data Register"
in
newline
group.long 0x10++0x07
line.long 0x00 "MATCH,Match Address Register"
hexmask.long.byte 0x00 16.--23. 0x01 "MA2,Match Address 2"
hexmask.long.byte 0x00 0.--7. 0x01 "MA1,Match Address 1"
line.long 0x04 "MODIR,Modem IrDA Register"
bitfld.long 0x04 18. "IREN,Infrared enable" "Disabled,Enabled"
bitfld.long 0x04 16.--17. "TNP,Transmitter narrow pulse" "1/OSR,2/OSR,3/OSR,4/OSR"
bitfld.long 0x04 3. "RXRTSE,Receiver request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 2. "TXRTSPOL,Transmitter request-to-send polarity" "Active low,Active high"
newline
bitfld.long 0x04 1. "TXRTSE,Transmitter request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 0. "TXCTSE,Transmitter clear-to-send enable" "Disabled,Enabled"
if ((per.l(ad:0x22A0000+0x08)&0xC0000)==0x00)&&((per.l(ad:0x22A0000+0x18)&0xC00000)==0xC00000)
group.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
rbitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
rbitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
eventfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
eventfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 15. "TXFLUSH,Transmit FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 14. "RXFLUSH,Receive FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
else
rgroup.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
bitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
newline
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
endif
if ((per.l(ad:0x22A0000+0x08)&0x80000)==0x80000)
rgroup.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
hexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
hexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
else
group.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
rhexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
rhexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
endif
tree.end
tree "LPUART6"
base ad:0x22B0000
if ((per.l(ad:0x22B0000+0x08)&0x10)==0x00)
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "8-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Oversampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
else
group.long 0x00++0x03
line.long 0x00 "BAUD,Baud Rate Register"
bitfld.long 0x00 31. "MAEN1,Match address mode enable 1" "Disabled,Enabled"
bitfld.long 0x00 30. "MAEN2,Match address mode enable 2" "Disabled,Enabled"
bitfld.long 0x00 29. "M10,10-bit mode select" "9-bit,10-bit"
bitfld.long 0x00 24.--28. "OSR,Over sampling ratio" ",,,4x,5x,6x,7x,8x,9x,10x,11x,12x,13x,14x,15x,16x,17x,18x,19x,20x,21x,22x,23x,24x,25x,26x,27x,28x,29x,30x,31x,32x"
newline
bitfld.long 0x00 23. "TDMAE,Transmitter DMA enable" "Disabled,Enabled"
bitfld.long 0x00 21. "RDMAE,Receiver full DMA enable" "Disabled,Enabled"
bitfld.long 0x00 17. "BOTHEDGE,Both edge sampling" "Disabled,Enabled"
bitfld.long 0x00 16. "RESYNCDIS,Resynchronization disable" "No,Yes"
newline
bitfld.long 0x00 15. "LBKDIE,LIN break detect interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 14. "RXEDGIE,RX input active edge interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 13. "SBNS,Stop bit number select" "1 bit,2 bits"
hexmask.long.word 0x00 0.--10. 1. "SBR,Baud rate modulo divisor"
endif
group.long 0x04++0x07
line.long 0x00 "STAT4,Status Register"
eventfld.long 0x00 31. "LBKDIF,LIN break detect interrupt flag" "Not detected,Detected"
eventfld.long 0x00 30. "RXEDGIF,LPUART_RX pin active edge interrupt flag" "Not detected,Detected"
bitfld.long 0x00 29. "MSBF,MSB first" "LSB first,MSB first"
bitfld.long 0x00 28. "RXINV,Receive data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x00 27. "RWUID,Receive wake up idle detect enable" "Disabled,Enabled"
bitfld.long 0x00 26. "BRK13,Break character generation length" "10-13 bit,13-16 bit"
bitfld.long 0x00 25. "LBKDE,LIN break detection enable" "10-13 bit,11-15 bit"
rbitfld.long 0x00 24. "RAF,Receiver active flag" "Not active,Active"
newline
rbitfld.long 0x00 23. "TDRE,Transmit data register empty flag" "Full,Empty"
rbitfld.long 0x00 22. "TC,Transmission complete flag" "Active,Idle"
rbitfld.long 0x00 21. "RDRF,Receive data register full flag" "Empty,Full"
eventfld.long 0x00 20. "IDLE,Idle line flag" "Not detected,Detected"
newline
eventfld.long 0x00 19. "OR,Receiver overrun flag" "No overrun,Overrun"
eventfld.long 0x00 18. "NF,Noise flag" "Not detected,Detected"
eventfld.long 0x00 17. "FE,Framing error flag" "No error,Error"
eventfld.long 0x00 16. "PF,Parity error flag" "No error,Error"
line.long 0x04 "CTRL,Control Register"
bitfld.long 0x04 31. "R8T9,Receive bit 8 / Transmit bit 9" "0,1"
bitfld.long 0x04 30. "R9T8,Receive bit 9 / Transmit bit 8" "0,1"
bitfld.long 0x04 29. "TXDIR,LPUART_TX pin direction in single-wire mode" "Input,Output"
bitfld.long 0x04 28. "TXINV,Transmit data inversion" "Not inverted,Inverted"
newline
bitfld.long 0x04 27. "ORIE,Overrun interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 26. "NEIE,Noise error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 25. "FEIE,Framing error interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 24. "PEIE,Parity error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 23. "TIE,Transmit interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 22. "TCIE,Transmission complete interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 21. "RIE,Receiver interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 20. "ILIE,Idle line interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x04 19. "TE,Transmitter enable" "Disabled,Enabled"
bitfld.long 0x04 18. "RE,Receiver enable" "Disabled,Enabled"
bitfld.long 0x04 17. "RWU,Receiver wakeup control" "Normal operation,Standby"
bitfld.long 0x04 16. "SBK,Send break" "Normal operation,Sent"
newline
bitfld.long 0x04 7. "LOOPS,Loop mode select" "Normal operation,Loop/single-wire"
bitfld.long 0x04 6. "DOZEEN,Doze enable" "Disabled,Enabled"
bitfld.long 0x04 5. "RSRC,Receiver source select" "Internal loop back,Single-wire LPUART"
bitfld.long 0x04 4. "M,9-Bit or 8-Bit mode select" "8-bit,9-bit"
newline
bitfld.long 0x04 3. "WAKE,Receiver wakeup method select" "Idle-line,Address-mark"
bitfld.long 0x04 2. "ILT,Idle line type select" "Start bit,Stop bit"
bitfld.long 0x04 1. "PE,Parity enable" "Disabled,Enabled"
bitfld.long 0x04 0. "PT,Parity type" "Even,Odd"
newline
hgroup.long 0x0C++0x03
hide.long 0x00 "DATA,Data Register"
in
newline
group.long 0x10++0x07
line.long 0x00 "MATCH,Match Address Register"
hexmask.long.byte 0x00 16.--23. 0x01 "MA2,Match Address 2"
hexmask.long.byte 0x00 0.--7. 0x01 "MA1,Match Address 1"
line.long 0x04 "MODIR,Modem IrDA Register"
bitfld.long 0x04 18. "IREN,Infrared enable" "Disabled,Enabled"
bitfld.long 0x04 16.--17. "TNP,Transmitter narrow pulse" "1/OSR,2/OSR,3/OSR,4/OSR"
bitfld.long 0x04 3. "RXRTSE,Receiver request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 2. "TXRTSPOL,Transmitter request-to-send polarity" "Active low,Active high"
newline
bitfld.long 0x04 1. "TXRTSE,Transmitter request-to-send enable" "Disabled,Enabled"
bitfld.long 0x04 0. "TXCTSE,Transmitter clear-to-send enable" "Disabled,Enabled"
if ((per.l(ad:0x22B0000+0x08)&0xC0000)==0x00)&&((per.l(ad:0x22B0000+0x18)&0xC00000)==0xC00000)
group.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
rbitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
rbitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
eventfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
eventfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 15. "TXFLUSH,Transmit FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 14. "RXFLUSH,Receive FIFO/Buffer flush" "No effect,Flush"
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
rbitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
else
rgroup.long 0x18++0x03
line.long 0x00 "FIFO,FIFO Register"
bitfld.long 0x00 23. "TXEMPT,Transmit buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 22. "RXEMPT,Receive buffer/FIFO empty" "Not empty,Empty"
bitfld.long 0x00 17. "TXOF,Transmitter buffer overflow flag" "No overflow,Overflow"
bitfld.long 0x00 16. "RXUF,Receiver buffer underflow flag" "No underflow,Underflow"
newline
bitfld.long 0x00 9. "TXOFE,Transmit FIFO overflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 8. "RXUFE,Receive FIFO underflow interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 7. "TXFE,Transmit FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 4.--6. "TXFIFOSIZE,Transmit FIFO buffer depth (datawords)" ",,,,,16,?..."
newline
bitfld.long 0x00 3. "RXFE,Receive FIFO enable" "Disabled,Enabled"
bitfld.long 0x00 0.--2. "RXFIFOSIZE,Receive FIFO buffer depth (datawords)" ",,,,,16,?..."
endif
if ((per.l(ad:0x22B0000+0x08)&0x80000)==0x80000)
rgroup.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
hexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
hexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
else
group.long 0x1C++0x03
line.long 0x00 "WATER,Watermark Register"
rhexmask.long.byte 0x00 24.--31. 1. "RXCOUNT,Receive counter"
hexmask.long.byte 0x00 16.--23. 1. "RXWATER,Receive watermark"
rhexmask.long.byte 0x00 8.--15. 1. "TXCOUNT,Transmit counter"
hexmask.long.byte 0x00 0.--7. 1. "TXWATER,Transmit watermark"
endif
tree.end
tree.end
sif cpuis("LS1028A")||cpuis("LS1018A")
tree "Multimedia Subsystem"
;    tree "LCD (LCD Controller)"
;        tree "DISP_ENG (Display Engine)"
;            base ad:0xF080000
;            %include ls1028a/disp_eng.ph
;        tree.end
;        tree "SCAL_ENG (Scaling Engine)"
;            base ad:0xF080000
;            %include ls1028a/scal_eng.ph
;        tree.end
;    tree.end
tree "GPU (Graphics Processing Unit)"
base ad:0xF0C0000
group.long 0x00++0x03
line.long 0x00 "AQHICLOCKCONTROL,Clock Control Register"
bitfld.long 0x00 20.--23. "PIPE_REG_SELECT,HI/MC used while reading registers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 19. "ISOLATE_GPU,Isolate GPU bit" "Not isolated,Isolated"
newline
bitfld.long 0x00 17. "IDLE2_D,2D pipe is idle" "Not idle,Idle"
rbitfld.long 0x00 16. "IDLE3_D,3D pipe is idle" "Not idle,Idle"
newline
bitfld.long 0x00 13. "DIS_RAM_POWER,Disables Ram power optimization" "No,Yes"
bitfld.long 0x00 10. "DIS_RAM_CLK,Disables Clock gating for rams" "No,Yes"
newline
bitfld.long 0x00 9. "FSC_CMD_LOAD,Core clock frequency scale value" "0,1"
hexmask.long.word 0x00 2.--8. 1. "FSCALE_VAL,Core clock frequency scale value"
newline
bitfld.long 0x00 1. "CLK2D_DIS,Software core clock disable signal" "No,Yes"
bitfld.long 0x00 0. "CLK3D_DIS,Software core clock disable signal for core (clk1x) and 3D (clksh) clocks" "No,Yes"
rgroup.long 0x04++0x03
line.long 0x00 "AQHIIDLE,Idle Status Register"
bitfld.long 0x00 31. "AXI_LP,AXI is in low power mode" "No,Yes"
bitfld.long 0x00 7. "IDLE_TX,TX is idle" "Not idle,Idle"
newline
bitfld.long 0x00 6. "IDLE_RA,RA is idle" "Not idle,Idle"
bitfld.long 0x00 5. "IDLE_SE,SE is idle" "Not idle,Idle"
newline
bitfld.long 0x00 4. "IDLE_PA,PA is idle" "Not idle,Idle"
bitfld.long 0x00 3. "IDLE_SH,SH is idle" "Not idle,Idle"
newline
bitfld.long 0x00 2. "IDLE_PE,PE is idle" "Not idle,Idle"
bitfld.long 0x00 0. "IDLE_FE,FE is idle" "Not idle,Idle"
rgroup.long 0x0C++0x03
line.long 0x00 "AQAXISTATUS,AXI Status Register"
bitfld.long 0x00 9. "DET_RD_ERR,Read error detection" "No error,Error"
bitfld.long 0x00 8. "DET_WR_ERR,Write error detection" "No error,Error"
newline
bitfld.long 0x00 4.--7. "RD_ERR_ID,Read error ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--3. "WR_ERR_ID,Write error ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x10++0x03
line.long 0x00 "AQINTRACKNOWLEDGE,Interrupt Acknowledge Register"
bitfld.long 0x00 31. "AXI_BUS_ERROR,For each interrupt event" "No error,Error"
newline
bitfld.long 0x00 30. "INTR_VEC[30],Interrupt 30 active" "Not active,Active"
bitfld.long 0x00 29. "[29],Interrupt 29 active" "Not active,Active"
newline
bitfld.long 0x00 28. "[28],Interrupt 28 active" "Not active,Active"
bitfld.long 0x00 27. "[27],Interrupt 27 active" "Not active,Active"
newline
bitfld.long 0x00 26. "[26],Interrupt 26 active" "Not active,Active"
bitfld.long 0x00 25. "[25],Interrupt 25 active" "Not active,Active"
newline
bitfld.long 0x00 24. "[24],Interrupt 24 active" "Not active,Active"
bitfld.long 0x00 23. "[23],Interrupt 23 active" "Not active,Active"
newline
bitfld.long 0x00 22. "[22],Interrupt 22 active" "Not active,Active"
bitfld.long 0x00 21. "[21],Interrupt 21 active" "Not active,Active"
newline
bitfld.long 0x00 20. "[20],Interrupt 20 active" "Not active,Active"
bitfld.long 0x00 19. "[19],Interrupt 19 active" "Not active,Active"
newline
bitfld.long 0x00 18. "[18],Interrupt 18 active" "Not active,Active"
bitfld.long 0x00 17. "[17],Interrupt 17 active" "Not active,Active"
newline
bitfld.long 0x00 16. "[16],Interrupt 16 active" "Not active,Active"
bitfld.long 0x00 15. "[15],Interrupt 15 active" "Not active,Active"
newline
bitfld.long 0x00 14. "[14],Interrupt 14 active" "Not active,Active"
bitfld.long 0x00 13. "[13],Interrupt 13 active" "Not active,Active"
newline
bitfld.long 0x00 12. "[12],Interrupt 12 active" "Not active,Active"
bitfld.long 0x00 11. "[11],Interrupt 11 active" "Not active,Active"
newline
bitfld.long 0x00 10. "[10],Interrupt 10 active" "Not active,Active"
bitfld.long 0x00 9. "[9],Interrupt 9 active" "Not active,Active"
newline
bitfld.long 0x00 8. "[8],Interrupt 8 active" "Not active,Active"
bitfld.long 0x00 7. "[7],Interrupt 7 active" "Not active,Active"
newline
bitfld.long 0x00 6. "[6],Interrupt 6 active" "Not active,Active"
bitfld.long 0x00 5. "[5],Interrupt 5 active" "Not active,Active"
newline
bitfld.long 0x00 4. "[4],Interrupt 4 active" "Not active,Active"
bitfld.long 0x00 3. "[3],Interrupt 3 active" "Not active,Active"
newline
bitfld.long 0x00 2. "[2],Interrupt 2 active" "Not active,Active"
bitfld.long 0x00 1. "[1],Interrupt 1 active" "Not active,Active"
newline
bitfld.long 0x00 0. "[0],Interrupt 0 active" "Not active,Active"
group.long 0x14++0x03
line.long 0x00 "AQINTRENBL,Interrupt Enablement Register"
bitfld.long 0x00 31. "INTR_ENBL_VEC[31],Interrupt 31 enable" "Disabled,Enabled"
bitfld.long 0x00 30. "[30],Interrupt 30 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 29. "[29],Interrupt 29 enable" "Disabled,Enabled"
bitfld.long 0x00 28. "[28],Interrupt 28 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "[27],Interrupt 27 enable" "Disabled,Enabled"
bitfld.long 0x00 26. "[26],Interrupt 26 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "[25],Interrupt 25 enable" "Disabled,Enabled"
bitfld.long 0x00 24. "[24],Interrupt 24 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "[23],Interrupt 23 enable" "Disabled,Enabled"
bitfld.long 0x00 22. "[22],Interrupt 22 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21. "[21],Interrupt 21 enable" "Disabled,Enabled"
bitfld.long 0x00 20. "[20],Interrupt 20 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "[19],Interrupt 19 enable" "Disabled,Enabled"
bitfld.long 0x00 18. "[18],Interrupt 18 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 17. "[17],Interrupt 17 enable" "Disabled,Enabled"
bitfld.long 0x00 16. "[16],Interrupt 16 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 15. "[15],Interrupt 15 enable" "Disabled,Enabled"
bitfld.long 0x00 14. "[14],Interrupt 14 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "[13],Interrupt 13 enable" "Disabled,Enabled"
bitfld.long 0x00 12. "[12],Interrupt 12 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "[11],Interrupt 11 enable" "Disabled,Enabled"
bitfld.long 0x00 10. "[10],Interrupt 10 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "[9],Interrupt 9 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "[8],Interrupt 8 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "[7],Interrupt 7 enable" "Disabled,Enabled"
bitfld.long 0x00 6. "[6],Interrupt 6 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "[5],Interrupt 5 enable" "Disabled,Enabled"
bitfld.long 0x00 4. "[4],Interrupt 4 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "[3],Interrupt 3 enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],Interrupt 2 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "[1],Interrupt 1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],Interrupt 0 enable" "Disabled,Enabled"
rgroup.long 0x24++0x07
line.long 0x00 "GCCHIPREV,Chip Revision Register"
line.long 0x04 "GCCHIPDATE,Chip Date Register"
group.long 0x78++0x03
line.long 0x00 "GCTOTALCYCLES,Total Cycles Register"
rgroup.long 0x98++0x03
line.long 0x00 "GCREGHICHIPPATCHREV,Patch Revision Register"
hexmask.long.byte 0x00 0.--7. 1. "PATCH_REV,Patch revision"
rgroup.long 0xA8++0x03
line.long 0x00 "GCPRODUCTID,Product ID Register"
bitfld.long 0x00 24.--27. "TYPE,Core type representator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.tbyte 0x00 4.--23. 1. "NUM,Core number representator"
newline
bitfld.long 0x00 0.--3. "GRADE_LEVEL,Grade level indicator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x100++0x03
line.long 0x00 "GCMODULEPOWERCONTROLS,Level Power Controls Register"
hexmask.long.word 0x00 16.--31. 1. "TURN_COUNT_OFF,Counter value for clock gating the module if the module is idle for this amount of clock cycles"
bitfld.long 0x00 4.--7. "TURN_COUNT_ON,Number of clock cycles to wait after turning on the clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 2. "DIS_STARVE_CLK,Module level clock gating for starve/idle condition disable" "No,Yes"
bitfld.long 0x00 1. "DIS_STALL_CLK,Module level clock gating for stall condition disable" "No,Yes"
newline
bitfld.long 0x00 0. "EN_CLK_GATING,Module level clock gating enable" "Disabled,Enabled"
wgroup.long 0x388++0x0F
line.long 0x00 "GCREGMMUAHBCONTROL,MMU Control Register"
bitfld.long 0x00 0. "MMU,Enable the MMU. For security reasons, once the MMU is enabled it cannot be disabled anymore" "Disabled,Enabled"
line.long 0x04 "GCREGMMUAHBTABLEARRAYBASEADDRESSLOW,MMU Table Array Low Base Address Register"
line.long 0x08 "GCREGMMUAHBTABLEARRAYBASEADDRESSHIGH,MMU Table Array High Base Address Register"
bitfld.long 0x08 9. "MASTER_TLB_SHAREABLE,Master TLB address is shareable or not" "Not shareable,Shareable"
bitfld.long 0x08 8. "MASTER_TLB_SECURE,Master TLB address is secure or not" "Not secured,Secured"
newline
hexmask.long.byte 0x08 0.--7. 1. "MASTER_TLB,Upper 8-bits of the master TLB address to form a true 40-bit address"
line.long 0x0C "GCREGMMUAHBTABLEARRAYSIZE,MMU Table Array Size Register"
hexmask.long.word 0x0C 0.--15. 1. "SIZE,16 bit MMU table array size"
wgroup.long 0x3A4++0x0B
line.long 0x00 "GCREGCMDBUFFERAHBCTRL,Command Buffer AHB Control Register"
bitfld.long 0x00 16. "ENABLE,Enable the command parser" "Disabled,Enabled"
hexmask.long.word 0x00 0.--15. 1. "PREFETCH,Number of 64-bit words to fetch from the command buffer"
line.long 0x04 "GCREGHIAHBCONTROL,AHB Control Register"
bitfld.long 0x04 1. "DEBUG_MODE,Enable debug mode if disabled" "Disabled,Enabled"
bitfld.long 0x04 0. "SOFT_RESET,Soft resets the module" "Disabled,Enabled"
line.long 0x08 "GCREGAXIAHBCONFIG,Axi AHB Configuration Register"
bitfld.long 0x08 20.--23. "AXCACHE_SHARED,AXCACHE value configuration for shareable request" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 18.--19. "AX_NON_SHARED,AXDOMAIN value configuration for non-shareable request" "0,1,2,3"
newline
bitfld.long 0x08 16.--17. "AX_SHARED,AXDOMAIN value configuration for shareable request" "0,1,2,3"
bitfld.long 0x08 12.--15. "ARCACHE,ARCACHE[3:0] value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x08 8.--11. "AWCACHE,AWCACHE[3:0] value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 4.--7. "ARID,ARID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x08 0.--3. "AWID,AWID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long 0x414++0x03
line.long 0x00 "AQMEMORYDEBUG,Memory Debug Register"
bitfld.long 0x00 30. "DONT_STALL_WRITES_TO_SAME_ADDRESS,Do not stall writes to the same address" "Stalled,Not stalled"
bitfld.long 0x00 24.--29. "Z_COMP_LIMIT,Z compression limit functionality" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 23. "DISABLE_WRITE_DATA_SPEEDUP,All write data speed up disable" "No,Yes"
bitfld.long 0x00 22. "DIS_STALL_READS,Stall reads functionality disable" "No,Yes"
newline
bitfld.long 0x00 19. "LIMIT_CONTROL,Data and requests limit control" "Requests,Data"
bitfld.long 0x00 17. "INTERLEAVE_BUFFER_LOW_LATENCY_MODE,Interleaving buffer low latency mode" "0,1"
newline
bitfld.long 0x00 15. "DISABLE_MULTI_VERTEX,Multi vertex capability disable" "No,Yes"
bitfld.long 0x00 14. "DISABLE_MINI_MMU_CACHE,Mini MMU cache disable" "No,Yes"
newline
bitfld.long 0x00 13. "DISABLE_BUBBLE_OPTIMIZATION_IN_DECODER,Bubble optimization in the decoder disable" "No,Yes"
bitfld.long 0x00 12. "DIS_HZ_L2,HZ in L2 disable" "No,Yes"
newline
hexmask.long.byte 0x00 0.--7. 1. "MAX_OUTSTANDING_READS,Total number of outstanding read requests limit"
group.long 0x42C++0x03
line.long 0x00 "AQREGISTERTIMINGCONTROL,Timing Control Register"
bitfld.long 0x00 22. "LIGHT_SLEEP,Light sleep" "0,1"
bitfld.long 0x00 21. "DEEP_SLEEP,Deep sleep" "0,1"
newline
bitfld.long 0x00 20. "POWER_DOWN,Power down memory" "No,Yes"
bitfld.long 0x00 18.--19. "FAST_WTC,WTC for fast RAM" "0,1,2,3"
newline
bitfld.long 0x00 16.--17. "FAST_RTC,RTC for fast RAM" "0,1,2,3"
hexmask.long.byte 0x00 8.--15. 1. "FOR_RF2P,For 2 port RAM"
newline
hexmask.long.byte 0x00 0.--7. 1. "FOR_RF1P,For 4 port RAM"
wgroup.long 0x654++0x03
line.long 0x00 "AQCMDBUFFERADDR,Base Address For The Command Buffer"
rgroup.long 0x664++0x03
line.long 0x00 "AQFEDEBUGCURCMDADR,Command Decoder Address"
hexmask.long 0x00 3.--31. 0x08 "CUR_CMD_ADR,Command buffer base address"
tree.end
tree "DTC (Display Transmitter Controller)"
tree "DP_TX (Display Port TX)"
base ad:0xF200000
group.long 0x904++0x07
line.long 0x00 "SOURCE_DPTX_CAR,Source DisplayPort TX Car Register"
bitfld.long 0x00 11. "DPTX_FRMR_DATA_CLK_RSTN_EN,DPTX framer data clock reset" "Disabled,Enabled"
bitfld.long 0x00 10. "DPTX_FRMR_DATA_CLK_EN,DPTX framer data clock enable" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "DPTX_PHY_DATA_RSTN_EN,DPTX data reset" "Disabled,Enabled"
bitfld.long 0x00 8. "DPTX_PHY_DATA_CLK_EN,DPTX data clock enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "DPTX_PHY_CHAR_RSTN_EN,DPTX char clock reset" "Disabled,Enabled"
bitfld.long 0x00 6. "DPTX_PHY_CHAR_CLK_EN,DPTX char clock enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5. "SOURCE_AUX_SYS_CLK_RSTN_EN,DPTX auxiliary clock reset" "Disabled,Enabled"
bitfld.long 0x00 4. "SOURCE_AUX_SYS_CLK_EN,DPTX auxiliary clock enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "DPTX_SYS_CLK_RSTN_EN,DPTX sys clock reset" "Disabled,Enabled"
bitfld.long 0x00 2. "DPTX_SYS_CLK_EN,DPTX sys clock enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "CFG_DPTX_VIF_CLK_RSTN_EN,DPTX pixel clock reset" "Disabled,Enabled"
bitfld.long 0x00 0. "CFG_DPTX_VIF_CLK_EN,DPTX pixel clock enable" "Disabled,Enabled"
line.long 0x04 "SOURCE_PHY_CAR,Source PHY Car Register"
bitfld.long 0x04 3. "SOURCE_PHY_CHAR_OUT_CLK_RSTN_EN,Source PHY char clock reset" "Reset,No reset"
bitfld.long 0x04 2. "SOURCE_PHY_CHAR_OUT_CLK_EN,Source PHY char clock enable" "Disabled,Enabled"
newline
bitfld.long 0x04 1. "SOURCE_PHY_DATA_OUT_CLK_RSTN_EN,Source PHY data clock reset" "Reset,No reset"
bitfld.long 0x04 0. "SOURCE_PHY_DATA_OUT_CLK_EN,Source PHY data clock enable" "Disabled,Enabled"
group.long 0x918++0x0B
line.long 0x00 "SOURCE_PKT_CAR,Source Packet Car Register"
bitfld.long 0x00 3. "SOURCE_PKT_SYS_RSTN_EN,Source packet interface sys clock reset" "Reset,No reset"
bitfld.long 0x00 2. "SOURCE_PKT_SYS_CLK_EN,Source packet interface sys clock enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "SOURCE_PKT_DATA_RSTN_EN,Source packet interface data clock reset" "Reset,No reset"
bitfld.long 0x00 0. "SOURCE_PKT_DATA_CLK_EN,Source packet interface data clock enable" "Disabled,Enabled"
line.long 0x04 "SOURCE_CIPHER_CAR,Source Cipher Car Register"
bitfld.long 0x04 3. "SOURCE_CIPHER_SYSTEM_CLK_RSTN_EN,Source cipher system clock reset" "Reset,No reset"
bitfld.long 0x04 2. "SOURCE_CIPHER_SYS_CLK_EN,SOurce cipher system clock enable" "Disabled,Enabled"
newline
bitfld.long 0x04 1. "SOURCE_CIPHER_CHAR_CLK_RSTN_EN,Source cipher char clock reset" "Reset,No reset"
bitfld.long 0x04 0. "SOURCE_CIPHER_CHAR_CLK_RSTN_EN,Source cipher char clock enable" "Disabled,Enabled"
line.long 0x08 "SOURCE_CRYPTO_CAR,Source Crypto Car Register"
bitfld.long 0x08 1. "SOURCE_CRYPTO_SYS_CLK_RSTN_EN,Source crypto system clock reset" "Reset,No reset"
bitfld.long 0x08 0. "SOURCE_CRYPTO_SYS_CLK_EN,Source crypto system clock enable" "Disabled,Enabled"
group.long 0x2000++0x03
line.long 0x00 "DP_TX_PHY_CONFIG_REG,Display Transmitter PHY Config Register"
bitfld.long 0x00 21. "DP_TX_PHY_10BIT_ENABLE,10-bit mode enable" "Disabled,Enabled"
bitfld.long 0x00 18.--20. "DP_TX_PHY_LANE3_SKEW,Programmable lane 3 skew" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 15.--17. "DP_TX_PHY_LANE2_SKEW,Programmable lane 2 skew" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12.--14. "DP_TX_PHY_LANE1_SKEW,Programmable lane 1 skew" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 9.--11. "DP_TX_PHY_LANE0_SKEW,Programmable lane 0 skew" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8. "DP_TX_PHY_DISPARITY_RST,Running disparity of the encoder reset" "No reset,Reset"
newline
bitfld.long 0x00 7. "DP_TX_PHY_SKEW_BYPASS,Lane skew bypass" "Not bypassed,Bypassed"
bitfld.long 0x00 6. "DP_TX_PHY_ENCODER_BYPASS,Encoder bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 5. "DP_TX_PHY_SCRAMBLER_BYPASS,Scrambler bypass" "Not bypassed,Bypassed"
bitfld.long 0x00 1.--4. "DP_TX_PHY_TRAINING_TYPE,Training pattern" "PRBS7,TPS1,TPS2,TPS3,TPS4,Custom,D10.2,SERM,CP2520 1,CP2520 2,CP2520 3,?..."
newline
bitfld.long 0x00 0. "DP_TX_PHY_TRAINING_ENABLE,Training sequence enable" "Disabled,Enabled"
group.long 0x200C++0x0B
line.long 0x00 "DP_TX_PHY_TRAINING_01_04,Display Transmitter PHY Training 01-04 Register"
hexmask.long.byte 0x00 24.--31. 1. "DP_TX_PHY_TRAINING_04,Byte 4 of the 80-bit custom training data"
hexmask.long.byte 0x00 16.--23. 1. "DP_TX_PHY_TRAINING_03,Byte 3 of the 80-bit custom training data"
newline
hexmask.long.byte 0x00 8.--15. 1. "DP_TX_PHY_TRAINING_02,Byte 2 of the 80-bit custom training data"
hexmask.long.byte 0x00 0.--7. 1. "DP_TX_PHY_TRAINING_01,Byte 1 of the 80-bit custom training data"
line.long 0x04 "DP_TX_PHY_TRAINING_05_08,Display Transmitter PHY Training 05-08 Register"
hexmask.long.byte 0x04 24.--31. 1. "DP_TX_PHY_TRAINING_08,Byte 8 of the 80-bit custom training data"
hexmask.long.byte 0x04 16.--23. 1. "DP_TX_PHY_TRAINING_07,Byte 7 of the 80-bit custom training data"
newline
hexmask.long.byte 0x04 8.--15. 1. "DP_TX_PHY_TRAINING_06,Byte 6 of the 80-bit custom training data"
hexmask.long.byte 0x04 0.--7. 1. "DP_TX_PHY_TRAINING_05,Byte 5 of the 80-bit custom training data"
line.long 0x08 "DP_TX_PHY_TRAINING_09_10,Display Transmitter PHY Training 09-10 Register"
hexmask.long.byte 0x08 8.--15. 1. "DP_TX_PHY_TRAINING_10,Byte 10 of the 80-bit custom training data"
hexmask.long.byte 0x08 0.--7. 1. "DP_TX_PHY_TRAINING_09,Byte 9 of the 80-bit custom training data"
group.long 0x2200++0x03
line.long 0x00 "DP_FRAMER_GLOBAL_CONFIG,Display Framer Global Config Register"
bitfld.long 0x00 7. "WR_VHSYNC_FALL,Write state machine synchronization on falling edge of vsync" "No,Yes"
bitfld.long 0x00 6. "ENC_RST_DIS,PHY reset by framer disable" "No,Yes"
newline
bitfld.long 0x00 5. "NO_VIDEO,No_video mode configuration bit" "0,1"
bitfld.long 0x00 4. "RG_EN,Rate governor enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "GLOBAL_EN,Complete framer module global enable" "Disabled,Enabled"
bitfld.long 0x00 2. "MST_SST,Mode select" "SST,MST"
newline
bitfld.long 0x00 0.--1. "NUM_LANES,Number of lanes" "1,2,,4"
group.long 0x2208++0x0B
line.long 0x00 "DP_FRAMER_TU,Display Framer TU Register"
hexmask.long.word 0x00 16.--24. 1. "BS_SR_REPLACE_POSITION,BS SR replace position"
bitfld.long 0x00 15. "TU_CNT_RST_EN,TU cnt rst en" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 8.--14. 1. "TU_SIZE,TU size"
bitfld.long 0x00 0.--5. "TU_VALID_SYMBOLS,Number of valid symbols in TU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "DP_FRAMER_PXL_REPR,Display Framer PXL REPR Register"
bitfld.long 0x04 8.--12. "PXL_ENC_FORMAT,Pixel encoding format" ",RGB,YCbCr 4:4:4,,YCbCr 4:2:2,,,,YCbCr 4:2:0,,,,,,,,Y only,?..."
bitfld.long 0x04 0.--4. "COLOR_DEPTH,Color depth" ",6 bpc,8 bpc,,10 bpc,,,,12 bpc,,,,,,,,16 bpc,?..."
line.long 0x08 "DP_FRAMER_SP,Display Framer SP Register"
bitfld.long 0x08 4. "STACKED_3D_EN,Stacked 3D enable" "Disabled,Enabled"
bitfld.long 0x08 3. "FRAMER_3D_EN,Framer 3D enable" "Disabled,Enabled"
newline
bitfld.long 0x08 2. "INTERLACE_EN,Interlace enable" "Disabled,Enabled"
bitfld.long 0x08 1. "HSP,HSYNC polarity" "Active high,Active low"
newline
bitfld.long 0x08 0. "VSP,VSYNC polarity" "Active high,Active low"
group.long 0x2254++0x07
line.long 0x00 "LINE_THRESH,Line Threshold Register"
bitfld.long 0x00 24.--29. "VC_TABLE_63,VC table value for time slot 63" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--21. "VC_TABLE_62,VC table value for time slot 62" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 8.--13. "VC_TABLE_61,VC table value for time slot 61" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--5. "CFG_ACTIVE_LINE_TRESH,Video FIFO latency threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "DP_VB_ID,Display Vertical Blancking ID Register"
hexmask.long.byte 0x04 0.--7. 1. "VB_ID,Vertical blancking ID"
group.long 0x2278++0x17
line.long 0x00 "DP_FRONT_BACK_PORCH,Display Front Back Porch Register"
hexmask.long.word 0x00 16.--31. 1. "FRONT_PORCH,Front porch"
hexmask.long.word 0x00 0.--15. 1. "BACK_PORCH,Back porch"
line.long 0x04 "DP_BYTE_COUNT,Display Byte Count Register"
hexmask.long.word 0x04 0.--15. 1. "BYTE_COUNT,Byte count"
line.long 0x08 "MSA_HORIZONTAL_0,MSA Horizontal 0 Register"
hexmask.long.word 0x08 16.--31. 1. "PCK_STUFF_HSTART,Horizontal active start"
hexmask.long.word 0x08 0.--15. 1. "PCK_STUFF_HTOTAL,Horizontal total"
line.long 0x0C "MSA_HORIZONTAL_1,MSA Horizontal 1 Register"
hexmask.long.word 0x0C 16.--31. 1. "PCK_STUFF_HWIDTH,Horizontal active video width"
bitfld.long 0x0C 15. "PCK_STUFF_HSYNCPOLARITY,Horizontal sync polarity" "0,1"
newline
hexmask.long.word 0x0C 0.--14. 1. "PCK_STUFF_HSYNCWIDTH,Horizontal sync width"
line.long 0x10 "MSA_VERTICAL_0,MSA Vertical 0 Register"
hexmask.long.word 0x10 16.--31. 1. "PCK_STUFF_VSTART,Vertical active start"
hexmask.long.word 0x10 0.--15. 1. "PCK_STUFF_VTOTAL,Vertical total"
line.long 0x14 "MSA_VERTICAL_1,MSA Vertical 1 Register"
hexmask.long.word 0x14 16.--31. 1. "PCK_STUFF_VHEIGHT,Vertical active video width"
bitfld.long 0x14 15. "PCK_STUFF_VSYNCPOLARITY,Vertical sync polarity" "0,1"
newline
hexmask.long.word 0x14 0.--14. 1. "PCK_STUFF_VSYNCWIDTH,Vertical sync width"
group.long 0x2294++0x03
line.long 0x00 "STREAM_CONFIG,Stream Config Register"
bitfld.long 0x00 0.--5. "STREAM_NUM,Number of current data stream" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long 0x22B0++0x0B
line.long 0x00 "DP_HORIZONTAL,Display Horizontal Register"
hexmask.long.word 0x00 16.--31. 1. "HSYNCWIDTH,Horizontal sync width"
hexmask.long.word 0x00 0.--14. 1. "HWIDTH,Horizontal total"
line.long 0x04 "DP_VERTICAL_0,Display Vertical 0 Register"
hexmask.long.word 0x04 16.--31. 1. "VSTART,Vstart"
hexmask.long.word 0x04 0.--15. 1. "VHEIGHT,Vheight"
line.long 0x08 "DP_VERTICAL_1,Display Vertical 1 Register"
bitfld.long 0x08 16. "VTOTAL_EVEN,Vtotal even indicator" "Odd,Even"
hexmask.long.word 0x08 0.--15. 1. "VTOTAL,Vtotal"
group.long 0x2300++0x07
line.long 0x00 "DPTX_LANE_EN,Display Transmitter Lane Enable Register"
bitfld.long 0x00 3. "DPTX_LANE_ENABLE[3],Display transmitter lane 3 enable" "Disabled,Enabled"
bitfld.long 0x00 2. "[2],Display transmitter lane 2 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "[1],Display transmitter lane 1 enable" "Disabled,Enabled"
bitfld.long 0x00 0. "[0],Display transmitter lane 0 enable" "Disabled,Enabled"
line.long 0x04 "DPTX_ENHNCD,Display Transmitter Enhanced Register"
bitfld.long 0x04 0. "DPTX_ENHANCED_MODE,Display transmitter enhanced mode enable" "Disabled,Enabled"
group.long 0x2828++0x03
line.long 0x00 "DP_AUX_DIVIDE_2M,Display AUX Divide 2M Register"
hexmask.long.byte 0x00 0.--7. 1. "AUX_HOST_DIVIDE_2M,Sys_clk/2 MHz ratio"
group.long 0x2830++0x07
line.long 0x00 "DP_AUX_FREQUENCY_1M_MAX,Display AUX Frequency 1M Max Register"
hexmask.long.byte 0x00 0.--7. 1. "AUX_HOST_1M_MAX,AUX host 1m max"
line.long 0x04 "DP_AUX_FREQUENCY_1M_MIN,Display AUX Frequency 1M Min Register"
hexmask.long.byte 0x04 0.--7. 1. "AUX_HOST_1M_MIN,AUX host 1m min"
group.long 0x30800++0x13
line.long 0x00 "SOURCE_PIF_WR_ADDR,Source PIF Write Address Register"
bitfld.long 0x00 0.--3. "WR_ADDR,4 MSB of the packet memory address in which the data is written" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "SOURCE_PIF_WR_REQ,Source PIF Write Request Register"
bitfld.long 0x04 0. "HOST_WR,Write request bit for the host write transaction" "Not requested,Requested"
line.long 0x08 "SOURCE_PIF_RD_ADDR,Source PIF Read Address Register"
bitfld.long 0x08 0.--3. "RD_ADDR,4 MSB of the packet memory address from which the data is read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x0C "SOURCE_PIF_RD_REQ,Source PIF Read Request Register"
bitfld.long 0x0C 0. "HOST_RD,Read request bit for the host read transaction" "Not requested,Requested"
line.long 0x10 "SOURCE_PIF_DATA_WR,Source PIF Write Data Register"
rgroup.long 0x30814++0x03
line.long 0x00 "SOURCE_PIF_DATA_RD,Source PIF Read Data Register"
group.long 0x30818++0x07
line.long 0x00 "SOURCE_PIF_FIFO1_FLUSH,Source PIF FIFO1 Flush Register"
bitfld.long 0x00 0. "FIFO1_FLUSH,FIFO1 flush bit" "Not flushed,Flushed"
line.long 0x04 "SOURCE_PIF_FIFO2_FLUSH,Source PIF FIFO2 Flush Register"
bitfld.long 0x04 0. "FIFO2_FLUSH,FIFO2 flush bit" "Not flushed,Flushed"
rgroup.long 0x30820++0x07
line.long 0x00 "SOURCE_PIF_STATUS,Source PIF Status Register"
bitfld.long 0x00 3. "FIFO2_EMPTY,FIFO2 empty indication" "Not empty,Empty"
bitfld.long 0x00 2. "FIFO1_FULL,FIFO1 full indication" "Not full,Full"
newline
bitfld.long 0x00 0.--1. "SOURCE_PKT_MEM_CTRL_FSM_STATE,State of the FSM that controls packet memory transactions" "0,1,2,3"
line.long 0x04 "SOURCE_PIF_INTERRUPT_SOURCE,Source PIF INterrupt Source Register"
bitfld.long 0x04 9. "FIFO2_UNDERFLOW,FIFO2 underflow indication" "No underflow,Underflow"
bitfld.long 0x04 8. "FIFO2_OVERFLOW,FIFO2 overflow indication" "No overflow,Overflow"
newline
bitfld.long 0x04 7. "FIFO1_UNDERFLOW,FIFO1 underflow indication" "No underflow,Underflow"
bitfld.long 0x04 6. "FIFO1_OVERFLOW,FIFO1 overflow indication" "No overflow,Overflow"
newline
bitfld.long 0x04 5. "ALLOC_WR_ERROR,Invalid write to the allocation table error" "No error,Error"
bitfld.long 0x04 4. "ALLOC_WR_DONE,Successful write to the allocation table" "Not occurred,Occurred"
newline
bitfld.long 0x04 3. "PSLVERR,APB slave error interrupt" "No interrupt,Interrupt"
bitfld.long 0x04 2. "NONVALID_TYPE_REQUESTED_INT,Nonvalid type of packet is requested by the packet interface indication" "Not occurred,Occurred"
newline
bitfld.long 0x04 1. "HOST_RD_DONE_INT,Host read transaction finished indication" "Not finished,Finished"
bitfld.long 0x04 0. "HOST_WR_DONE_INT,Host write transaction finished indication" "Not finished,Finished"
group.long 0x30828++0x0F
line.long 0x00 "SOURCE_PIF_INTERRUPT_MASK,Source PIF Interrupt Mask Register"
bitfld.long 0x00 9. "FIFO2_UNDERFLOW_MASK,FIFO2_UNDERFLOW interrupt mask" "Not masked,Masked"
bitfld.long 0x00 8. "FIFO2_OVERFLOW_MASK,FIFO2_OVERFLOW interrupt mask" "Not masked,Masked"
newline
bitfld.long 0x00 7. "FIFO1_UNDERFLOW_MASK,FIFO1_UNDERFLOW interrupt mask" "Not masked,Masked"
bitfld.long 0x00 6. "FIFO1_OVERFLOW_MASK,FIFO1_OVERFLOW interrupt mask" "Not masked,Masked"
newline
bitfld.long 0x00 5. "ALLOC_WR_ERROR_MASK,ALLOC_WR_ERROR interrupt mask" "Not masked,Masked"
bitfld.long 0x00 4. "ALLOC_WR_DONE_MASK,ALLOC_WR_DONE interrupt mask" "Not masked,Masked"
newline
bitfld.long 0x00 3. "PLSVERR_MASK,PLSVERR interrupt mask" "Not masked,Masked"
bitfld.long 0x00 2. "NONVALID_TYPE_REQUESTED_INT_MASK,NONVALID_TYPE_REQUESTED_INT interrupt mask" "Not masked,Masked"
newline
bitfld.long 0x00 1. "HOST_RD_DONE_INT_MASK,HOST_RD_DONE_INT interrupt mask" "Not masked,Masked"
bitfld.long 0x00 0. "HOST_WR_DONE_INT_MASK,HOST_WR_DONE_INT interrupt mask" "Not masked,Masked"
line.long 0x04 "SOURCE_PIF_PKT_ALLOC_REG,Source PIF Packet Allocation Register"
bitfld.long 0x04 17. "ACTIVE_IDLE_TYPE,Active idle type" "0,1"
bitfld.long 0x04 16. "TYPE_VALID,Type valid" "Nonvalid,Valid"
newline
hexmask.long.byte 0x04 8.--15. 1. "PACKET_TYPE,Type of packet"
bitfld.long 0x04 0.--3. "PKT_ALLOC_ADDRESS,Register address in the source allocation table" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x08 "SOURCE_PIF_PKT_ALLOC_WR_EN,Source PIF Packet Allocation Write Enable Register"
bitfld.long 0x08 0. "PKT_ALLOC_WR_EN,Writing to the allocation table enable" "Disabled,Enabled"
line.long 0x0C "SOURCE_PIF_SW_RESET,Source PIF Software Reset Register"
bitfld.long 0x0C 0. "SW_RST,Software reset" "No reset,Reset"
rgroup.long 0x60000++0x07
line.long 0x00 "HDCP_REVISION,HDCP Revision Register"
hexmask.long.byte 0x00 24.--31. 1. "REG_FILE_REV,Revision number for the register file"
hexmask.long.byte 0x00 16.--23. 1. "HDCP_22_REV,Revision number for the HDCP 2.2 engine"
newline
hexmask.long.byte 0x00 8.--15. 1. "HDCP_14_REV,Revision number for the HDCP 1.4 engine"
hexmask.long.byte 0x00 0.--7. 1. "TOP_HDCP_REV,Revision number for the top level RTL code"
line.long 0x04 "INTERRUPT_SOURCE,Interrupt Source Register"
bitfld.long 0x04 4. "PSLVERR,APB slave error generated when APB address is out of the range" "No error,Error"
bitfld.long 0x04 3. "CIPHER_START_BLOCK_SEQ,Block start event" "Not occurred,Occurred"
newline
bitfld.long 0x04 2. "CIPHER_STERT_REKEY,Start rekey event" "Not occurred,Occurred"
bitfld.long 0x04 1. "FRAME_CNT_WA,Frame counter wraparound event" "Not occurred,Occurred"
newline
bitfld.long 0x04 0. "DATA_CNT_WA,Data counter wraparound event" "Not occurred,Occurred"
group.long 0x60008++0x27
line.long 0x00 "INTERRUPT_MASK,Interrupt Mask Register"
bitfld.long 0x00 4. "PSLVERR_MSK,PSLVERR interrupt mask" "Not masked,Masked"
bitfld.long 0x00 3. "CIPHER_START_BLOCK_SEQ_MASK,CIPHER_START_BLOCK_SEQ interrupt mask" "Not masked,Masked"
newline
bitfld.long 0x00 2. "CIPHER_START_REKEY_MSK,CIPHER_START_REKEY interrupt mask" "Not masked,Masked"
bitfld.long 0x00 1. "FRAME_CNT_WA_MSK,FRAME_COUNT_WA interrupt mask" "Not masked,Masked"
newline
bitfld.long 0x00 0. "DATA_CNT_WA_MSK,DATA_COUNT_WA interrupt mask" "Not masked,Masked"
line.long 0x04 "HDCP_CIPHER_CONFIG,HDCP Cipher Config Register"
bitfld.long 0x04 7. "CIPHER14_CALC_RI_SW_EN,Calculate ri for RX" "Not calculated,Calculated"
bitfld.long 0x04 6. "CFG_REPEATER,HDCP1.x ri calculation repeater bit" "0,1"
newline
bitfld.long 0x04 5. "START_FREE_RUN,Start free running enable for hdcprngcipher operation cipher 1.4 command" "Not started,Started"
bitfld.long 0x04 4. "CORE_SW_RESET,Cipher core software reset signal" "No reset,Reset"
newline
bitfld.long 0x04 3. "HDCP_FUNCTION,HDCP function performed selection" "Transmitter,Receiver"
bitfld.long 0x04 0.--2. "HDCP_SELECT,HDCP core version support" "HDCP 1.4,HDCP 2.2,?..."
line.long 0x08 "AES_128_KEY_0,AES 128 Key 0 Register"
line.long 0x0C "AES_128_KEY_1,AES 128 Key 1 Register"
line.long 0x10 "AES_128_KEY_2,AES 128 Key 2 Register"
line.long 0x14 "AES_128_KEY_3,AES 128 Key 3 Register"
line.long 0x18 "AES_128_RANDOM_0,AES 128 Random 0 Register"
line.long 0x1C "AES_128_RANDOM_1,AES 128 Random 1 Register"
line.long 0x20 "CIPHER14_KM_0,Cipher 1.4 KM 0 Register"
line.long 0x24 "CIPHER14_KM_1,Cipher 1.4 KM 1 Register"
hexmask.long.tbyte 0x24 0.--23. 1. "CIPHER14_KM_1,3 most significant bytes of the km value"
rgroup.long 0x60030++0x0B
line.long 0x00 "CIPHER14_STATUS,Cipher 1.4 Status Register"
hexmask.long.byte 0x00 8.--14. 1. "CIPHER14_COUNT,Cipher 1.4 counter output status"
bitfld.long 0x00 4. "AUTHENTICATED,Authentication" "Not authenticated,Authenticated"
newline
bitfld.long 0x00 0.--3. "CIPHER14_STATE,Cipher 1.4 SM current state" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "CIPHER14_RI_PJ_STATUS,Cipher 1.4 Ri And Pj Status"
hexmask.long.word 0x04 16.--31. 1. "CIPHER14_RI,HDCP 1.4 ri data"
hexmask.long.byte 0x04 0.--7. 1. "CIPHER14_PJ,HDCP 1.4 pj data"
line.long 0x08 "CIPHER_MODE,Cipher Mode Register"
bitfld.long 0x08 0. "CIPHER_HDMI_MODE,Cipher HDMI mode" "DVI,HDMI"
group.long 0x6003C++0x0B
line.long 0x00 "CIPHER14_AN_0,Cipher 14 AN 0 Register"
line.long 0x04 "CIPHER14_AN_1,Cipher 14 AN 1 Register"
line.long 0x08 "CIPHER22_AUTH,Cipher 22 Authentication Register"
bitfld.long 0x08 0. "CIPHER22_AUTH,Cipher 22 authentication" "Not authenticated,Authenticated"
rgroup.long 0x60048++0x03
line.long 0x00 "CIPHER14_R0_DP_STATUS,Cipher 1.4 R0 DP Status Register"
hexmask.long.word 0x00 0.--15. 1. "CIPHER14_R0_DP,R0 of DP"
group.long 0x6004C++0x03
line.long 0x00 "CIPHER14_BOOTSTRAP,Cipher 1.4 Bootstrap Register"
bitfld.long 0x00 0. "CIPHER14_BOOTSTRAP,Cipher14_bootstrap" "Not bootstrapped,Bootstrapped"
tree.end
tree "PHY (PHY Subsystem)"
tree "HDP_PHY_PCS_CMN"
base ad:0xC000
group.word 0x10++0x03
line.word 0x00 "PHY_HDP_MODE_CTL,HDP Mode Control Register"
bitfld.word 0x00 15. "PHY_HDP_MODE_CTL_15_12[15],PHY DP lane 3 disable" "No,Yes"
bitfld.word 0x00 14. "[14],PHY DP lane 2 disable" "No,Yes"
bitfld.word 0x00 13. "[13],PHY DP lane 1 disable" "No,Yes"
bitfld.word 0x00 12. "[12],PHY DP lane 0 disable" "No,Yes"
newline
rbitfld.word 0x00 4.--7. "PHY_HDP_MODE_CTL_7_4,HDP power state acknowledgement" ",A0,A1,,A2,,,,A3,?..."
bitfld.word 0x00 0.--3. "PHY_HDP_MODE_CTL_3_0,HDP power state" ",A0,A1,,A2,,,,A3,?..."
line.word 0x02 "PHY_HDP_CLK_CTL,HDP Clock Control Register"
bitfld.word 0x02 12.--15. "PHY_HDP_CLK_CTL_15_12,DP PLL data rate 1 clock divider value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.word 0x02 8.--11. "PHY_HDP_CLK_CTL_11_8,DP PLL data rate 0 clock divider value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.word 0x02 3. "PHY_HDP_CLK_CTL_3,HDP PLL clock enable acknowledgement" "Disabled,Enabled"
bitfld.word 0x02 2. "PHY_HDP_CLK_CTL_2,HDP PLL clock enable" "Disabled,Enabled"
newline
rbitfld.word 0x02 1. "PHY_HDP_CLK_CTL_1,HDP PLL ready" "Not ready,Ready"
bitfld.word 0x02 0. "PHY_HDP_CLK_CTL_0,HDP PLL enable" "Disabled,Enabled"
newline
hgroup.word 0x1E++0x01
hide.word 0x00 "PHY_STS,PHY Status Register"
in
newline
group.word 0x20++0x01
line.word 0x00 "PHY_ISO_CMN_CTRL,PHY Common Control Signal Isolation Register"
bitfld.word 0x00 0. "PHY_ISO_CMN_CTRL_0,Phy_reset_n PHY input drive when in PHY and PMA isolation modes" "Not driven,Driven"
tree.end
tree "HDP_PHY_PCS_LANE"
base ad:0xC400
group.word 0x10++0x01
line.word 0x00 "PHY_HDP_TX_CTL,HDP Lane Configuration Register"
bitfld.word 0x00 4.--5. "PHY_HDP_TX_CTL_5_4,TX voltage level" "Level 0,Level 1,Level 2,Level 3"
bitfld.word 0x00 0.--1. "PHY_HDP_TX_CTL_1_0,TX de-emphasis setting" "Level 0,Level 1,Level 2,Level 3"
group.word 0x38++0x03
line.word 0x00 "PHY_DP_ISO_TX_DATA_LO,DP TX Data Low Isolation Register"
line.word 0x02 "PHY_DP_ISO_TX_DATA_HI,DP TX Data High Isolation Register"
bitfld.word 0x02 0.--3. "PHY_DP_ISO_TX_DATA_HI_3_0,Phy_pma_tx_data_ln_XX[19:16] drive" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree "HDP_PHY_PMA_CMN"
base ad:0xC800
group.word 0x00++0x01
line.word 0x00 "PHY_PMA_CMN_CTRL1,PMA Common Control 1 Register"
bitfld.word 0x00 14.--15. "PHY_PMA_CMN_CTRL1_15_14,Cmn_ref_clk_ana_div PMA input drive" "0,1,2,3"
bitfld.word 0x00 12.--13. "PHY_PMA_CMN_CTRL1_13_12,Cmn_ref_clk_dig_div PMA input drive" "0,1,2,3"
bitfld.word 0x00 10.--11. "PHY_PMA_CMN_CTRL1_11_10,Cmn_psm_clk_dig_div PMA input drive" "0,1,2,3"
newline
bitfld.word 0x00 4.--6. "PHY_PMA_CMN_CTRL1_6_4,Cmn_ref_clk_sel PMA input drive" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 3. "PHY_PMA_CMN_CTRL1_3,Cmn_ref_clk_rcv_en PMA input drive" "0,1"
rbitfld.word 0x00 2. "PHY_PMA_CMN_CTRL1_2,Cmn_macro_suspend_ack PMA output current value" "0,1"
newline
rbitfld.word 0x00 1. "PHY_PMA_CMN_CTRL1_1,Cmn refclk_active PMA output current value" "0,1"
rbitfld.word 0x00 0. "PHY_PMA_CMN_CTRL1_0,Cmn_ready PMA output current value" "0,1"
rgroup.word 0x02++0x05
line.word 0x00 "PHY_PMA_CMN_CTRL2,PMA Common Control 2 Register"
bitfld.word 0x00 6. "PHY_PMA_CMN_CTRL2_6,Cmn_pll0_locked PMA output current value" "0,1"
bitfld.word 0x00 4. "PHY_PMA_CMN_CTRL2_4,Cmn_pll0_clk_datastart_en_ack PMA output current value" "0,1"
bitfld.word 0x00 2. "PHY_PMA_CMN_CTRL2_2,Cmn_pll0_disabled PMA output current value" "0,1"
newline
bitfld.word 0x00 0. "PHY_PMA_CMN_CTRL2_0,Cmn_pll0_ready PMA output current value" "0,1"
line.word 0x02 "PHY_PMA_SSM_STATE,PMA SSM Current State Register"
hexmask.word 0x02 0.--8. 1. "PHY_PMA_SSM_STATE_8_0,Current state of the PMA startup state machine"
line.word 0x04 "PHY_PMA_ISO_PLL_SM_STATE,PMA PLL State Machine Current State Register"
hexmask.word 0x04 0.--11. 1. "PHY_PMA_ISO_PLL_SM_STATE_11_0,Cmn_pllsm_state[11:0] current value"
group.word 0x20++0x05
line.word 0x00 "PHY_PMA_ISO_CMN_CTRL,PMA Common Control Signal Isolation Register"
rbitfld.word 0x00 7. "PHY_PMA_ISO_CMN_CTRL_7,Cmn_clock_stop_ack PMA output current value" "0,1"
bitfld.word 0x00 6. "PHY_PMA_ISO_CMN_CTRL_6,Cmn_clock_stop_req PMA input drive" "0,1"
rbitfld.word 0x00 5. "PHY_PMA_ISO_CMN_CTRL_5,Cmn_macro_pwr_en_ack PMA output current value" "0,1"
newline
bitfld.word 0x00 4. "PHY_PMA_ISO_CMN_CTRL_4,Cmn_macro_pwr_en PMA input drive" "0,1"
bitfld.word 0x00 3. "PHY_PMA_ISO_CMN_CTRL_3,Cmn_refclk_disable PMA input drive" "0,1"
bitfld.word 0x00 2. "PHY_PMA_ISO_CMN_CTRL_2,Cmn_macro_suspend_req PMA input drive" "0,1"
newline
bitfld.word 0x00 1. "PHY_PMA_ISO_CMN_CTRL_1,Cmn_macro_en PMA input drive" "0,1"
bitfld.word 0x00 0. "PHY_PMA_ISO_CMN_CTRL_0,Cmn_reset_n PMA input drive" "0,1"
line.word 0x02 "PHY_PMA_ISO_PLL_CTRL0,PMA PLL Control 0 Isolation Register"
bitfld.word 0x02 2. "PHY_PMA_ISO_PLL_CTRL0_2,Cmn_pll0_clk_datart_en PMA input drive" "0,1"
bitfld.word 0x02 0. "PHY_PMA_ISO_PLL_CTRL0_0,Cmn_pll0_en PMA input drive" "0,1"
line.word 0x04 "PHY_PMA_ISO_PLL_CTRL1,PMA PLL COntrol 1 Isolation Register"
bitfld.word 0x04 4.--7. "PHY_PMA_ISO_PLL_CTRL1_7_4,Cmn_pll0_clk_datart1_div PMA input drive" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.word 0x04 0.--3. "PHY_PMA_ISO_PLL_CTRL1_3_0,Cmn_pll0_clk_datart0_div PMA input drive" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.word 0x3E++0x01
line.word 0x00 "PHY_PMA_ISOLATION_CTRL,Isolation Control Register"
bitfld.word 0x00 15. "PHY_PMA_ISOLATION_CTRL_15,PHY_PMA isolation enable" "Disabled,Enabled"
bitfld.word 0x00 14. "PHY_PMA_ISOLATION_CTRL_14,PHY_PMA common isolation enable" "Disabled,Enabled"
bitfld.word 0x00 12. "PHY_PMA_ISOLATION_CTRL_12,PHY/PMA isolation mode select" "PHY,PMA"
newline
hexmask.word.byte 0x00 0.--7. 1. "PHY_PMA_ISOLATION_CTRL_7_0,PHY/PMA lane isolation enable"
tree.end
tree "HDP_PHY_PMA_LANE"
base ad:0xCC00
group.word 0x00++0x03
line.word 0x00 "PHY_PMA_XCVR_CTRL,PMA Transceiver Control Register"
rbitfld.word 0x00 10. "PHY_PMA_XCVR_CTRL_10,Xcvr_lane_en_ack PMA output current value for the associated lane" "0,1"
bitfld.word 0x00 8.  "PHY_PMA_XCVR_CTRL_8,Tx_differential_invert PMA input drive for the associated lane" "0,1"
rbitfld.word 0x00 3. "PHY_PMA_XCVR_CTRL_3,Rx_bist_status_ln_{nnn} PMA output current value for the associated lane" "0,1"
rbitfld.word 0x00 2. "PHY_PMA_XCVR_CTRL_2,Rx_bist_err_toggle_ln_{nnn} PMA output current value for the associated lane" "0,1"
newline
rbitfld.word 0x00 1. "PHY_PMA_XCVR_CTRL_1,Rx_bist_sync_ln_{nnn} PMA output current value for the associated lane" "0,1"
line.word 0x02 "PHY_PMA_XCVR_LPBK,PMA Loopback Control Register"
bitfld.word 0x02 8. "PHY_PMA_XCVR_LPBK_8,Tx_bist_hold PMA input drive for all lanes in the associated link" "0,1"
bitfld.word 0x02 5. "PHY_PMA_XCVR_LPBK_5,Txrx_fe_parallel_lpbk_en_ln_{nnn} PMA input drive for the associated lane" "0,1"
bitfld.word 0x02 4. "PHY_PMA_XCVR_LPBK_4,Txrx_ne_parallel_lpbk_en_ln_{nnn} PMA input drive for the associated lane" "0,1"
bitfld.word 0x02 3. "PHY_PMA_XCVR_LPBK_3,Txrx_recovered_clk_lpbk_en_ln_{nnn} PMA input drive for the associated line" "0,1"
newline
bitfld.word 0x02 2. "PHY_PMA_XCVR_LPBK_2,Txrx_line_lpbk_en_ln_{nnn} PMA input drive for the associated lane" "0,1"
bitfld.word 0x02 1. "PHY_PMA_XCVR_LPBK_1,Txrx_isi_gen_lpbk_en_ln_{nnn} PMA input drive for the associated lane" "0,1"
bitfld.word 0x02 0. "PHY_PMA_XCVR_LPBK_0,Txrx_serial_lpbk_en_ln_{nnn} PMA input drive for the associated lane" "0,1"
rgroup.word 0x08++0x03
line.word 0x00 "PHY_PMA_PSM_STATE_LO,PMA PSM Current State Lower Register"
line.word 0x02 "PHY_PMA_PSM_STATE_HI,PMA PSM CUrrent State Higher Register"
hexmask.word.byte 0x02 0.--7. 1. "PHY_PMA_PSM_STATE_HI_7_0,Current state of the PMA power state machine"
group.word 0x20++0x0B
line.word 0x00 "PHY_PMA_ISO_XCVR_CTRL,PMA Isolation Transceiver Control Register"
rbitfld.word 0x00 15. "PHY_PMA_ISO_XCVR_CTRL_15,Xcvr_pll_clk_en_ack PMA output current value for the associated lane" "0,1"
bitfld.word 0x00 14. "PHY_PMA_ISO_XCVR_CTRL_14,Xcvr_pll_clk_en PMA input drive for the associated lane" "0,1"
bitfld.word 0x00 13. "PHY_PMA_ISO_XCVR_CTRL_13,Tx_lfps_en PMA input drive for the associated lane" "0,1"
bitfld.word 0x00 12. "PHY_PMA_ISO_XCVR_CTRL_12,Tx_elec_idle PMA input drive for the associated lane" "0,1"
newline
rbitfld.word 0x00 11. "PHY_PMA_ISO_XCVR_CTRL_11,Xcvr_psm_ready PMA output current value for the associated lane" "0,1"
rbitfld.word 0x00 10. "PHY_PMA_ISO_XCVR_CTRL_10,Tx_rcv_detected PMA output current value for the associated lane" "0,1"
rbitfld.word 0x00 9. "PHY_PMA_ISO_XCVR_CTRL_9,Tx_rcv_detect_done PMA output current value for the associated lane" "0,1"
bitfld.word 0x00 8. "PHY_PMA_ISO_XCVR_CTRL_8,Tx_rcv_detect_en PMA input drive for the associated lane" "0,1"
newline
bitfld.word 0x00 5. "PHY_PMA_ISO_XCVR_CTRL_5,Xcvr_link_reset_n PMA input drive for the associated lane" "0,1"
bitfld.word 0x00 4. "PHY_PMA_ISO_XCVR_CTRL_4,Xcvr_lane_suspend PMA input drive for the associated lane" "0,1"
bitfld.word 0x00 0. "PHY_PMA_ISO_XCVR_CTRL_0,Xcvr_lane_en PMA input drive for the associated lane" "0,1"
line.word 0x02 "PHY_PMA_ISO_TX_CFG,PMA TX Configuration Register"
bitfld.word 0x02 12.--13. "PHY_PMA_ISO_TX_CFG_13_12,Tx_deemphasis PMA input drive for the associated lane" "0,1,2,3"
bitfld.word 0x02 8. "PHY_PMA_ISO_TX_CFG_8,Tx_low_power_swing_en PMA input drive for the associated lane" "0,1"
bitfld.word 0x02 0.--2. "PHY_PMA_ISO_TX_CFG_2_0,Tx_vmargin PMA input drive for the associated lane" "0,1,2,3,4,5,6,7"
line.word 0x04 "PHY_PMA_ISO_LINK_MODE,PMA Isolation Mode Control Register"
bitfld.word 0x04 15. "PHY_PMA_ISO_LINK_MODE_15,Tx_reset_n PMA input drive for the associated lane" "0,1"
bitfld.word 0x04 12. "PHY_PMA_ISO_LINK_MODE_12,Tx_high_z PMA input drive for the associated lane" "0,1"
bitfld.word 0x04 4.--5. "PHY_PMA_ISO_LINK_MODE_5_4,Xcvr_standard_mode PMA input drive for the associated lane" "0,1,2,3"
bitfld.word 0x04 0.--2. "PHY_PMA_ISO_LINK_MODE_2_0,xcvr_data_width PMA input drive for the associated lane" "0,1,2,3,4,5,6,7"
line.word 0x06 "PHY_PMA_ISO_PWRST_CTRL,PMA Isolation Power State Control Register"
bitfld.word 0x06 14. "PHY_PMA_ISO_PWRST_CTRL_14,Tx_cmn_mode_en_ext PMA input for the associated lane" "0,1"
rbitfld.word 0x06 8.--13. "PHY_PMA_ISO_PWRST_CTRL_13_8,Xcvr_power_state_ack PMA output current value for the associated lane" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.word 0x06 0.--5. "PHY_PMA_ISO_WRST_CTRL_5_0,Xcvr power_state_req PMA input drive for the associated lane" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.word 0x08 "PHY_PMA_ISO_TX_DATA_LO,PMA Transmit Low Data Isolation Register"
line.word 0x0A "PHY_PMA_ISO_TX_DATA_HI,PMA Transmit High Data Isolation Register"
bitfld.word 0x0A 0.--3. "PHY_PMA_ISO_TX_DATA_HI_3_0,Tx_td[19:16] PMA input drive for the associated lane" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree.end
tree.end
tree "PLLDIG (PLL Digital Interface)"
base ad:0xF1F0000
group.long 0x20++0x03
line.long 0x00 "PLLCR,PLLDIG PLL Control Register"
bitfld.long 0x00 8.--9. "CLKCFG,Operational state of the PLL" "Off,,,Running"
bitfld.long 0x00 3. "LOLIE,Loss-of-lock interrupt request when PLLDIG_PLLSR[LOLF] = 1" "Not requested,Requested"
bitfld.long 0x00 2. "LOLRE,System reset is asserted or not upon a loss-of-lock indication from PLL" "Not asserted,Asserted"
group.long 0x24++0x03
line.long 0x00 "PLLSR,PLLDIG PLL Status Register"
rbitfld.long 0x00 10. "ENVCO,PLL VCO output enable" "Disabled,Enabled"
rbitfld.long 0x00 9. "ENPHI1,PLL PHI1 output enable" "Disabled,Enabled"
rbitfld.long 0x00 8. "ENPHI,PLL PHI output enable" "Disabled,Enabled"
eventfld.long 0x00 3. "LOLF,Interrupt request flag for the loss-of-lock condition" "Not requested,Requested"
rbitfld.long 0x00 2. "LOCK,Lock status bit" "Unlocked,Locked"
group.long 0x28++0x0B
line.long 0x00 "PLLDV,PLLDIG PLL Divider Register"
bitfld.long 0x00 25.--30. "RFDPHI1,PHI1 reduced frequency divider" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 16.--21. "RFDPHI,PHI reduced frequency divider" ",1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 12.--14. "PREDIV,Input clock predivider" "Divide by 1,Divide by 1,Divide by 2,Divide by 3,Divide by 4,Divide by 5,Divide by 6,Divide by 7"
hexmask.long.byte 0x00 0.--7. 1. "MFD,Loop multiplication factor divider"
line.long 0x04 "PLLFM,PLLDIG PLL Frequency Modulation Register"
bitfld.long 0x04 30. "SSCGBYP,Spectrum modulation" "Not bypassed,Bypassed"
bitfld.long 0x04 29. "MODSEL,Modulation selection" "Centered,Spread"
hexmask.long.word 0x04 16.--25. 1. "STEPSIZE,Modulation period"
hexmask.long.word 0x04 0.--10. 1. "STEPNO,Increment step"
line.long 0x08 "PLLFD,PLLDIG PLL Fractional Divide Register"
bitfld.long 0x08 30. "FDMEN,Fractional divider enable" "Disabled,Enabled"
bitfld.long 0x08 29. "SDM2,Second order sigma delta modulation select" "Disabled,Enabled"
bitfld.long 0x08 28. "SDM3,Third order sigma delta modulation select" "Disabled,Enabled"
bitfld.long 0x08 18.--21. "DTHRCTL,Dither control" ",,,,,,,,,,,,,Enabled,,"
hexmask.long.word 0x08 0.--14. 1. "MFN,Numerator for fractional loop division factor"
group.long 0x38++0x07
line.long 0x00 "PLLCAL1,PLL Calibration Register 1"
hexmask.long.byte 0x00 24.--30. 1. "NDAC1,Limit for calibration DAC"
line.long 0x04 "PLLCAL2,PLL Calibration Register 2"
bitfld.long 0x04 3.--6. "CALCP,Calibration charge pump current" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--2. "V2ICP,V2I charge pump current" "0,1,2,3,4,5,6,7"
tree.end
tree.end
endif
tree "PEX (PCI Express Interface Controller)"
tree "PEX1 (PCI Express Interface Controller 1)"
tree "Configuration Registers"
base ad:0x3400000
rgroup.word 0x00++0x03
line.word 0x00 "VENDOR_ID,PCI Express Vendor ID Register"
line.word 0x02 "DEVICE_ID,PCI Express Device ID Register"
abitfld.word 0x02 0.--15. "DEVICE_ID,DEVICE_ID" "0x82C0=LS1028A with security,0x82C1=LS1028A without security,0x82C4=LS1027A with security,0x82C5=LS1027A without security,0x82E0=LS1018A with security,0x82E1=LS1018A without security,0x82E4=LS1017A with security,0x82E5=LS1017A without security"
group.word 0x04++0x03
line.word 0x00 "COMMAND,PCI Express Command Register"
bitfld.word 0x00 10. "INTERRUPT_DISABLE,Interrupt disable" "No,Yes"
bitfld.word 0x00 8. "SERR,SERR# enable" "Disabled,Enabled"
newline
bitfld.word 0x00 6. "PARITY_ERROR_RESPONSE,Parity error response" "No response,Response"
bitfld.word 0x00 2. "BUS_MASTER,Bus master enable" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "MEMORY_SPACE,Memory space enable" "Disabled,Enabled"
rbitfld.word 0x00 0. "IO_SPACE,I/O space enable" "Disabled,Enabled"
line.word 0x02 "STATUS,PCI Express Status Register"
eventfld.word 0x02 15. "DETECTED_PARITY_ERROR,Detected parity error" "No error,Error"
eventfld.word 0x02 14. "SIGNALED_SYSTEM_ERROR,Signaled system error" "No error,Error"
newline
eventfld.word 0x02 13. "RECEIVED_MASTER_ABORT,Received master abort" "Not received,Received"
eventfld.word 0x02 12. "RECEIVED_TARGET_ABORT,Received target abort" "Not received,Received"
newline
eventfld.word 0x02 11. "SIGNALED_TARGET_ABORT,Signaled target abort" "Not signaled,Signaled"
eventfld.word 0x02 8. "MASTER_DATA_PARITY_ERROR_DETECTED,Master data parity error detected" "No error,Error"
newline
eventfld.word 0x02 4. "CAPABILITIES_LIST,Capabilities list" "Not implemented,Implemented"
eventfld.word 0x02 3. "INTERRUPT_STATUS,Interrupt status" "No interrupt,Interrupt"
rgroup.byte 0x08++0x00
line.byte 0x00 "REVISION_ID,PCI Express Revision ID Register"
rgroup.tbyte 0x09++0x02
line.tbyte 0x00 "CLASS_CODE,PCI Express Class Code Register"
hexmask.tbyte.byte 0x00 16.--23. 1. "BASE_CLASS,Base class"
hexmask.tbyte.byte 0x00 8.--15. 1. "SUB_CLASS,Sub-class"
newline
hexmask.tbyte.byte 0x00 0.--7. 1. "PROGRAMMING_INTERFACE,Programming interface"
group.byte 0x0C++0x00
line.byte 0x00 "CACHE_LINE_SIZE,PCI Express Cache Line Size Register"
rgroup.byte 0x0D++0x01
line.byte 0x00 "LATENCY_TIMER,PCI Express Latency Timer Register"
line.byte 0x01 "HEADER_TYPE,PCI Express Header Type Register"
bitfld.byte 0x01 7. "MULTIFUNCTION,Identifies whether a device supports multiple functions" "Single,Multiple"
abitfld.byte 0x01 0.--6. "HEADER_LAYOUT,Header layout" "0x00=Endpoint - Type 0,0x01=Root Complex - Type 1"
group.long 0x10++0x03
line.long 0x00 "BAR0,PCI Express Base Address Register 0"
hexmask.long.tbyte 0x00 12.--31. 0x10 "ADDRESS,Indicates the base address of the inbound memory window"
bitfld.long 0x00 3. "PREF,Prefetchable" "Not prefetchable,Prefetchable"
newline
bitfld.long 0x00 1.--2. "TYPE,Type" "Locate anywhere/32-bit,?..."
bitfld.long 0x00 0. "MEMSP,Memory space indicator" "Memory space,I/O space"
if (((per.l(ad:0x1E00000+0x13C))&0x20)==0x20)
group.long 0x14++0x13
line.long 0x00 "BAR1,PCI Express Base Address Register 1"
hexmask.long.tbyte 0x00 12.--31. 0x10 "ADDRESS,Indicates the base address of the inbound memory window"
bitfld.long 0x00 3. "PREF,Prefetchable" "Not prefetchable,Prefetchable"
newline
bitfld.long 0x00 1.--2. "TYPE,Type" "Locate anywhere/32-bit,?..."
bitfld.long 0x00 0. "MEMSP,Memory space indicator" "Memory space,I/O space"
line.long 0x04 "BAR2,PCI Express Base Address Register 2"
hexmask.long.tbyte 0x04 12.--31. 0x10 "ADDRESS,Indicates the lower portion of the base address of the inbound memory window"
bitfld.long 0x04 3. "PREF,Prefetchable" "Not prefetchable,Prefetchable"
newline
bitfld.long 0x04 1.--2. "TYPE,Type" "Locate anywhere/32-bit,,Locate anywhere/64-bit,?..."
bitfld.long 0x04 0. "MEMSP,Memory space indicator" "Memory space,I/O space"
line.long 0x08 "BAR3,PCI Express Base Address Register 3"
line.long 0x0C "BAR4,PCI Express Base Address Register 4"
hexmask.long.tbyte 0x0C 12.--31. 0x10 "ADDRESS,Indicates the lower portion of the base address of the inbound memory window"
bitfld.long 0x0C 3. "PREF,Prefetchable" "Not prefetchable,Prefetchable"
newline
bitfld.long 0x0C 1.--2. "TYPE,Type" "Locate anywhere/32-bit,,Locate anywhere/64-bit,?..."
bitfld.long 0x0C 0. "MEMSP,Memory space indicator" "Memory space,I/O space"
line.long 0x10 "BAR5,PCI Express Base Address Register 5"
rgroup.word 0x2C++0x03
line.word 0x00 "SUBSYSTEM_VENDOR_ID,PCI Express Subsystem Vendor ID Register"
line.word 0x02 "SUBSYSTEM_ID,PCI Express Subsystem ID Register"
group.long 0x30++0x03
line.long 0x00 "EXPANSION_ROM_BAR_TYPE0,PCI Express Expansion ROM Base Address Register"
hexmask.long.tbyte 0x00 11.--31. 0x08 "ROM_BASE_ADDRESS,Specifies bits 31:11 of the non-prefetchable expansion ROM space start address"
bitfld.long 0x00 0. "ROMBAR_EN,Address decode enable" "Disabled,Enabled"
else
group.byte 0x18++0x02
line.byte 0x00 "PRIMARY_BUS_NUMBER,PCI Express Primary Bus Number Register"
line.byte 0x01 "SECONDARY_BUS_NUMBER,PCI Express Secondary Bus Number Register"
line.byte 0x02 "SUBORDINATE_BUS_NUMBER,PCI Express Subordinate Bus Number Register"
group.byte 0x1C++0x01
line.byte 0x00 "IO_BASE,PCI Express I/O Base Register"
bitfld.byte 0x00 4.--7. "IO_START_ADDRESS,Specifies bits 15:12 of the I/O space start address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.byte 0x00 0.--3. "ADDRESS_DECODE_TYPE,Specifies the number of I/O address bits" "16-bit,32-bit,?..."
line.byte 0x01 "IO_LIMIT,PCI Express I/O Limit Register"
bitfld.byte 0x01 4.--7. "IO_LIMIT_ADDRESS,Specifies bits 15:12 of the I/O space ending address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.byte 0x01 0.--3. "ADDRESS_DECODE_TYPE,Specifies the number of I/O address bits" "16-bit,32-bit,?..."
group.word 0x1E++0x09
line.word 0x00 "SECONDARY_STATUS,PCI Express Secondary Status Register"
eventfld.word 0x00 15. "DPE,Detected parity error" "Not detected,Detected"
eventfld.word 0x00 14. "SSE,Signaled system error" "Not signaled,Signaled"
newline
eventfld.word 0x00 13. "RMA,Received master abort" "Not received,Received"
eventfld.word 0x00 12. "RTA,Received target abort" "Not received,Received"
newline
eventfld.word 0x00 11. "STA,Signaled target abort" "Not signaled,Signaled"
eventfld.word 0x00 8. "MDPE,Master data parity error" "No error,Error"
line.word 0x02 "MEMORY_BASE,PCI Express Memory Base Register"
hexmask.word 0x02 4.--15. 0x10 "MEMORY_BASE,Specifies bits 31:20 of the non-prefetchable memory space start address"
line.word 0x04 "MEMORY_LIMIT,PCI Express Memory Limit Register"
hexmask.word 0x04 4.--15. 0x10 "MEMORY_LIMIT,Specifies bits 31:20 of the non-prefetchable memory space ending address"
line.word 0x06 "PREFETCHABLE_MEMORY_BASE,PCI Express Prefetchable Memory Base Register"
hexmask.word 0x06 4.--15. 0x10 "PF_MEMORY_BASE,Specifies bits 31:20 of the prefetchable memory space start address"
rbitfld.word 0x06 0.--3. "ADDRESS_DECODE_TYPE,Specifies the number of prefetchable memory address bits" "32-bit,64-bit,?..."
line.word 0x08 "PREFETCHABLE_MEMORY_LIMIT,PCI Express Prefetchable Memory Limit Register"
hexmask.word 0x08 4.--15. 0x10 "PF_MEMORY_LIMIT,Specifies bits 31:20 of the prefetchable memory space ending address"
rbitfld.word 0x08 0.--3. "ADDRESS_DECODE_TYPE,Specifies the number of prefetchable memory address bits" "32-bit,64-bit,?..."
group.long 0x28++0x07
line.long 0x00 "PREFETCHABLE_BASE_UPPER_32_BITS,PCI Express Prefetchable Base Upper 32 Bits Register"
line.long 0x04 "PREFETCHABLE_LIMIT_UPPER_32_BITS,PCI Express Prefetchable Limit Upper 32 Bits Register"
rgroup.word 0x30++0x03
line.word 0x00 "IO_BASE_UPPER_16_BITS,PCI Express I/O Base Upper 16 Bits Register"
line.word 0x02 "IO_LIMIT_UPPER_16_BITS,PCI Express I/O Limit Upper 16 Bits Register"
endif
rgroup.byte 0x34++0x00
line.byte 0x00 "CAPABILITIES_POINTER,Capabilities Pointer Register"
if (((per.l(ad:0x1E00000+0x13C))&0x20)==0x00)
group.long 0x38++0x03
line.long 0x00 "EXPANSION_ROM_BAR_TYPE1,PCI Express Expansion ROM Base Address Register"
hexmask.long.tbyte 0x00 11.--31. 0x08 "ROM_BASE_ADDRESS,Specifies bits 31:11 of the non-prefetchable expansion ROM space start address"
bitfld.long 0x00 0. "ROMBAR_EN,Address decode enable" "Disabled,Enabled"
endif
group.byte 0x3C++0x00
line.byte 0x00 "INTERRUPT_LINE,PCI Express Interrupt Line Register"
rgroup.byte 0x3D++0x00
line.byte 0x00 "INTERRUPT_PIN,PCI Express Interrupt Pin Register"
bitfld.byte 0x00 0.--7. "INTERRUPT_PIN,Legacy INTx message used by this device" "Not used,INTA,?..."
if (((per.l(ad:0x1E00000+0x13C))&0x20)==0x20)
rgroup.byte 0x3E++0x01
line.byte 0x00 "MINIMUM_GRANT,PCI Express Minimum Grant Register"
line.byte 0x01 "MAXIMUM_LATENCY,PCI Express Maximum Latency Register"
else
group.word 0x3E++0x01
line.word 0x00 "BRIDGE_CONTROL,PCI Express Bridge Control Register"
bitfld.word 0x00 6. "SCND_RST,Secondary bus reset" "No reset,Reset"
bitfld.word 0x00 3. "VGA_EN,VGA enable" "Disabled,Enabled"
newline
bitfld.word 0x00 2. "ISA_EN,ISA enable" "Disabled,Enabled"
bitfld.word 0x00 1. "SERR_EN,SERR enable" "Disabled,Enabled"
newline
bitfld.word 0x00 0. "PER,Parity error response" "No response,Response"
endif
rgroup.byte 0x40++0x00
line.byte 0x00 "POWER_MANAGEMENT_CAPABILITY_ID,PCI Express Power Management Capability ID Register"
rgroup.word 0x42++0x01
line.word 0x00 "POWER_MANAGEMENT_CAPABILITIES,PCI Express Power Management Capabilities Register"
bitfld.word 0x00 11.--15. "PME_SUPPORT,Power states supported by this device" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 10. "D2,D2 support" "Not supported,Supported"
newline
bitfld.word 0x00 9. "D1,D1 support" "Not supported,Supported"
bitfld.word 0x00 6.--8. "AUX_CURR,AUX current" "0,1,2,3,4,5,6,7"
newline
bitfld.word 0x00 5. "DSI,Device specific initialization" "0,1"
bitfld.word 0x00 3. "PME_CLK,PME clock" "0,1"
newline
bitfld.word 0x00 0.--2. "VERSION,Version of the specification" "0,1,2,3,4,5,6,7"
group.word 0x44++0x01
line.word 0x00 "POWER_MANAGEMENT_STATUS_AND_CONTROL,PCI Express Power Management Status and Control Register"
eventfld.word 0x00 15. "PME_STAT,PME status" "0,1"
bitfld.word 0x00 13.--14. "DATA_SCALE,Data scale field" "0,1,2,3"
newline
bitfld.word 0x00 9.--12. "DATA_SELECT,Data select field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.word 0x00 8. "PME_EN,PME enable" "Disabled,Enabled"
newline
bitfld.word 0x00 0.--1. "POWER_STATE,Indicates the current power state of the function" "D0,D1,D2,D3"
rgroup.byte 0x47++0x00
line.byte 0x00 "POWER_MANAGEMENT_DATA,PCI Express Power Management Data Register"
if (((per.l(ad:0x1E00000+0x13C))&0x20)==0x20)
rgroup.byte 0x50++0x00
line.byte 0x00 "MSI_MESSAGE_CAPABILITY_ID,PCI Express MSI Message Capability ID Register"
group.word 0x52++0x01
line.word 0x00 "MSI_MESSAGE_CONTROL,PCI Express MSI Message Control Register"
rbitfld.word 0x00 7. "AC_64,64-bit address capable" "Not capable,Capable"
bitfld.word 0x00 4.--6. "MME,Multiple message enable" "0,1,2,3,4,5,6,7"
newline
rbitfld.word 0x00 1.--3. "MMC,Multiple message capable" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 0. "MSIE,MSI enable" "Disabled,Enabled"
group.long 0x54++0x07
line.long 0x00 "MSI_MESSAGE_ADDRESS,PCI Express MSI Message Address Register"
hexmask.long 0x00 2.--31. 0x04 "MESSAGE_ADDRESS,System-specified message address"
line.long 0x04 "MSI_MESSAGE_UPPER_ADDRESS,PCI Express MSI Message Upper Address Register"
group.word 0x5C++0x01
line.word 0x00 "MSI_MESSAGE_DATA,PCI Express MSI Message Data Register"
else
hgroup.byte 0x50++0x00
hide.byte 0x00 "MSI_MESSAGE_CAPABILITY_ID,PCI Express MSI Message Capability ID Register"
hgroup.word 0x52++0x01
hide.word 0x00 "MSI_MESSAGE_CONTROL,PCI Express MSI Message Control Register"
hgroup.long 0x54++0x03
hide.long 0x00 "MSI_MESSAGE_ADDRESS,PCI Express MSI Message Address Register"
hgroup.long 0x58++0x03
hide.long 0x00 "MSI_MESSAGE_UPPER_ADDRESS,PCI Express MSI Message Upper Address Register"
hgroup.word 0x5C++0x01
hide.word 0x00 "MSI_MESSAGE_DATA,PCI Express MSI Message Data Register"
endif
rgroup.byte 0x70++0x00
line.byte 0x00 "CAPABILITY_ID,PCI Express Capability ID Register"
if (((per.l(ad:0x1E00000+0x13C))&0x20)==0x00)
rgroup.word 0x72++0x01
line.word 0x00 "CAPABILITIES,PCI Express Capabilities Register"
bitfld.word 0x00 9.--13. "INTERRUPT_MESSAGE_NUMBER,Contains offset between base message data and the MSI message that is generated when any of the status bits are set" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 8. "SLOT,Slot implemented" "Not implemented,Implemented"
newline
bitfld.word 0x00 4.--7. "DEVICE_PORT_TYPE,Device/Port type" "EP mode,,,,RC mode,?..."
bitfld.word 0x00 0.--3. "CAPABILITY_VERSION,Indicates the defined PCI express capability structure version number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
rgroup.word 0x72++0x01
line.word 0x00 "CAPABILITIES,PCI Express Capabilities Register"
bitfld.word 0x00 9.--13. "INTERRUPT_MESSAGE_NUMBER,Contains offset between base Message Data and the MSI Message that is generated when any of the status bits are set" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.word 0x00 4.--7. "DEVICE_PORT_TYPE,Device/Port type" "EP mode,,,,RC mode,?..."
bitfld.word 0x00 0.--3. "CAPABILITY_VERSION,Indicates the defined PCI Express capability structure version number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
endif
rgroup.long 0x74++0x03
line.long 0x00 "DEVICE_CAPABILITIES,PCI Express Device Capabilities Register"
bitfld.long 0x00 28. "FLRC,Functional level reset capability" "0,1"
bitfld.long 0x00 26.--27. "CSPLS,Captured slot power limit scale" "0,1,2,3"
newline
hexmask.long.word 0x00 18.--25. 1. "CSPLV,Captured slot power limit value"
bitfld.long 0x00 15. "RBER,Role-based error reporting" "0,1"
newline
bitfld.long 0x00 9.--11. "EP_L1_LAT,Endpoint L1 acceptable latency" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6.--8. "EP_L0S_LAT,Endpoint L0s acceptable latency" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 5. "ET,Extended tag field supported" "0,1"
bitfld.long 0x00 3.--4. "PHAN_FCT,Phantom functions supported" "0,1,2,3"
newline
bitfld.long 0x00 0.--2. "MAX_PL_SIZE_SUP,Max_payload_size supported" ",256-bytes,?..."
group.word 0x78++0x03
line.word 0x00 "DEVICE_CONTROL,PCI Express Device Control Register"
bitfld.word 0x00 15. "IFLR,Initiate functional level reset" "No reset,Reset"
bitfld.word 0x00 12.--14. "MAX_READ_SIZE,Maximum_read_request_size" "0,1,2,3,4,5,6,7"
newline
bitfld.word 0x00 11. "ENS,Enable no snoop" "Disabled,Enabled"
bitfld.word 0x00 10. "APE,AUX power PM enable" "Disabled,Enabled"
newline
bitfld.word 0x00 9. "PFE,Phantom functions enable" "Disabled,Enabled"
bitfld.word 0x00 8. "ETE,Extended tag field enable" "Disabled,Enabled"
newline
bitfld.word 0x00 5.--7. "MAX_PAYLOAD_SIZE,Max_payload_size" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 4. "RO,Enable relaxed ordering" "Disabled,Enabled"
newline
bitfld.word 0x00 3. "URR,Unsupported request reporting enable" "Disabled,Enabled"
bitfld.word 0x00 2. "FER,Fatal error reporting enable" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "NFER,Non-fatal error reporting enable" "Disabled,Enabled"
bitfld.word 0x00 0. "CER,Correctable error reporting enable" "Disabled,Enabled"
line.word 0x02 "DEVICE_STATUS,PCI Express Device Status Register"
rbitfld.word 0x02 5. "TP,Transactions pending" "Not pending,Pending"
rbitfld.word 0x02 4. "APD,AUX power detected" "Not detected,Detected"
newline
eventfld.word 0x02 3. "URD,Unsupported request detected" "Not detected,Detected"
eventfld.word 0x02 2. "FED,Fatal error detected" "Not detected,Detected"
newline
eventfld.word 0x02 1. "NFED,Non-fatal error detected" "Not detected,Detected"
eventfld.word 0x02 0. "CED,Correctable error detected" "Not detected,Detected"
rgroup.long 0x7C++0x03
line.long 0x00 "LINK_CAPABILITIES,PCI Express Link Capabilities Register"
hexmask.long.byte 0x00 24.--31. 1. "PORT_NUMBER,Port number"
bitfld.long 0x00 22. "AOC,ASPM optionality compliance" "0,1"
newline
bitfld.long 0x00 21. "LBWN,Link bandwidth notification capability" "Not capable,Capable"
bitfld.long 0x00 20. "DLLARC,Data link layer active reporting capable" "Not capable,Capable"
newline
bitfld.long 0x00 19. "SD_ERR_RPT_CAP,Surprise down error reporting capable" "Not capable,Capable"
bitfld.long 0x00 18. "CPM,Clock power management" "0,1"
newline
bitfld.long 0x00 15.--17. "L1_EX_LAT,L1 exit latency" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12.--14. "L0S_EX_LAT,L0s exit latency" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--11. "ASPM,Active state power management (ASPM) support" "0,1,2,3"
bitfld.long 0x00 4.--9. "MAX_LINK_W,Maximum link width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 0.--3. "MAX_LINK_SP,Maximum link speed" ",2.5 GT/s,5.0 GT/s,8.0 GT/s,?..."
if (((per.l(ad:0x1E00000+0x13C))&0x20)==0x20)
group.word 0x80++0x01
line.word 0x00 "LINK_CONTROL,PCI Express Link Control Register"
bitfld.word 0x00 11. "LABIE,Link autonomous bandwidth interrupt enable" "Disabled,Enabled"
bitfld.word 0x00 10. "LBMIE,Link bandwidth management interrupt enable" "Disabled,Enabled"
newline
bitfld.word 0x00 9. "HW_AUTO_WIDTH_DIS,Hardware Autonomous Width Disable" "No,Yes"
bitfld.word 0x00 8. "ECPM,Enable clock power management" "Disabled,Enabled"
newline
bitfld.word 0x00 7. "EXT_SYNC,Extended synch" "0,1"
bitfld.word 0x00 6. "CCC,Common clock configuration" "0,1"
newline
bitfld.word 0x00 3. "RCB,Read completion boundary" "0,1"
bitfld.word 0x00 0.--1. "ASPM_CTL,Active state power management (ASPM) control" "0,1,2,3"
rgroup.word 0x82++0x01
line.word 0x00 "LINK_STATUS,PCI Express Link Status Register"
bitfld.word 0x00 15. "LABS,Link autonomous bandwidth status" "0,1"
bitfld.word 0x00 14. "LBMS,Link bandwidth management status" "0,1"
newline
bitfld.word 0x00 12. "SCC,Slot clock configuration" "0,1"
bitfld.word 0x00 11. "LT,Link training" "0,1"
newline
bitfld.word 0x00 4.--9. "NEG_LINK_W,Negotiated link width" ",x1,x2,,x4,?..."
bitfld.word 0x00 0.--3. "LINK_SP,Negotiated link speed" ",2.5GT/s,5.0GT/s,8.0GT/s,?..."
hgroup.long 0x84++0x03
hide.long 0x00 "SLOT_CAPABILITIES,PCI Express Slot Capabilities Register"
hgroup.word 0x88++0x01
hide.word 0x00 "SLOT_CONTROL,PCI Express Slot Control Register"
hgroup.word 0x8A++0x01
hide.word 0x00 "SLOT_STATUS,PCI Express Slot Status Register"
hgroup.word 0x8C++0x01
hide.word 0x00 "ROOT_CONTROL,PCI Express Root Control Register"
hgroup.word 0x8E++0x01
hide.word 0x00 "ROOT_CAPABILITIES,PCI Express Root Capabilities"
hgroup.long 0x90++0x03
hide.long 0x00 "ROOT_STATUS,PCI Express Root Status Register"
else
group.word 0x80++0x03
line.word 0x00 "LINK_CONTROL,PCI Express Link Control Register"
bitfld.word 0x00 11. "LABIE,Link autonomous bandwidth interrupt enable" "Disabled,Enabled"
bitfld.word 0x00 10. "LBMIE,Link bandwidth management interrupt enable" "Disabled,Enabled"
newline
bitfld.word 0x00 9. "HW_AUTO_WIDTH_DIS,Hardware Autonomous Width Disable" "No,Yes"
bitfld.word 0x00 8. "ECPM,Enable clock power management" "Disabled,Enabled"
newline
bitfld.word 0x00 7. "EXT_SYNC,Extended synch" "0,1"
bitfld.word 0x00 6. "CCC,Common clock configuration" "0,1"
newline
bitfld.word 0x00 5. "RL,Retrain link" "No effect,Initiated"
bitfld.word 0x00 4. "LD,Link disable" "No,Yes"
newline
bitfld.word 0x00 3. "RCB,Read completion boundary" "0,1"
bitfld.word 0x00 0.--1. "ASPM_CTL,Active state power management (ASPM) control" "0,1,2,3"
line.word 0x02 "LINK_STATUS,PCI Express Link Status Register"
eventfld.word 0x02 15. "LABS,Link autonomous bandwidth status" "0,1"
eventfld.word 0x02 14. "LBMS,Link bandwidth management status" "0,1"
newline
rbitfld.word 0x02 12. "SCC,Slot clock configuration" "0,1"
rbitfld.word 0x02 11. "LT,Link training" "0,1"
newline
rbitfld.word 0x02 4.--9. "NEG_LINK_W,Negotiated link width" ",x1,x2,,x4,,,,x8,?..."
rbitfld.word 0x02 0.--3. "LINK_SP,Negotiated link speed" ",2.5GT/s,5.0GT/s,8.0GT/s,?..."
rgroup.long 0x84++0x03
line.long 0x00 "SLOT_CAPABILITIES,PCI Express Slot Capabilities Register"
hexmask.long.word 0x00 19.--31. 1. "PHYSICAL_SLOT_NUMBER,Indicates the physical slot number attached to this port"
bitfld.long 0x00 18. "NOCMDCPLSUP,No command completed support" "0,1"
newline
bitfld.long 0x00 17. "EMIP,Electromechanical interlock present" "Not present,Present"
bitfld.long 0x00 15.--16. "SPLS,Slot power limit scale" "0,1,2,3"
newline
hexmask.long.word 0x00 7.--14. 1. "SPLV,Slot power limit value"
bitfld.long 0x00 6. "HPD,Hot-plug capable" "Not capable,Capable"
newline
bitfld.long 0x00 5. "HPS,Hot-plug surprise" "0,1"
bitfld.long 0x00 4. "PIP,Power indicator present" "Not present,Present"
newline
bitfld.long 0x00 3. "AIP,Attention indicator present" "Not present,Present"
bitfld.long 0x00 2. "MRLSP,MRL sensor present" "Not present,Present"
newline
bitfld.long 0x00 1. "PCP,Power controller present" "Not present,Present"
bitfld.long 0x00 0. "ABP,Attention button present" "Not present,Present"
group.word 0x88++0x07
line.word 0x00 "SLOT_CONTROL,PCI Express Slot Control Register"
bitfld.word 0x00 12. "DLLSTCHGEN,Data link layer state changed enable" "Disabled,Enabled"
bitfld.word 0x00 11. "EMICTL,Electromechanical interlock control" "0,1"
newline
bitfld.word 0x00 10. "PCC,Power controller control" "0,1"
bitfld.word 0x00 8.--9. "PIC,Power indicator control" ",On,Blink,Off"
newline
bitfld.word 0x00 6.--7. "AIC,Attention indicator control" ",On,Blink,Off"
bitfld.word 0x00 5. "HPIE,Hot plug interrupt enable" "Disabled,Enabled"
newline
bitfld.word 0x00 4. "CCIE,Command completed interrupt enable" "Disabled,Enabled"
bitfld.word 0x00 3. "PDCE,Presence detect changed enable" "Disabled,Enabled"
newline
bitfld.word 0x00 2. "MRLSCE,MRL sensor changed enable" "Disabled,Enabled"
bitfld.word 0x00 1. "PFDE,Power fault detected enable" "Disabled,Enabled"
newline
bitfld.word 0x00 0. "ABPE,Attention button pressed enable" "Disabled,Enabled"
line.word 0x02 "SLOT_STATUS,PCI Express Slot Status Register"
eventfld.word 0x02 8. "DLLSTCHG,Data link layer state changed" "Not changed,Changed"
bitfld.word 0x02 7. "EM_IL_ST,Electromechanical interlock status" "0,1"
newline
rbitfld.word 0x02 6. "PDS,Indicates presence of an adapter in the slot" "Not present,Present"
rbitfld.word 0x02 5. "MRLSS,MRL sensor state" "Closed,Open"
newline
eventfld.word 0x02 4. "CC,Command completed" "Not completed,Completed"
eventfld.word 0x02 3. "PDC,Presence detect changed" "Not changed,Changed"
newline
eventfld.word 0x02 2. "MRLSC,MRL sensor changed" "Not changed,Changed"
eventfld.word 0x02 1. "PFD,Power fault detected" "Not detected,Detected"
newline
eventfld.word 0x02 0. "ABP,Attention button pressed" "Not pressed,Pressed"
line.word 0x04 "ROOT_CONTROL,PCI Express Root Control Register"
bitfld.word 0x04 4. "CRSSWVE,CRS software visibility enable" "Disabled,Enabled"
bitfld.word 0x04 3. "PMEIE,PME interrupt enable" "Disabled,Enabled"
newline
bitfld.word 0x04 2. "SEFEE,System error on fatal error enable" "Disabled,Enabled"
bitfld.word 0x04 1. "SENFEE,System error on non-fatal error enable" "Disabled,Enabled"
newline
bitfld.word 0x04 0. "SECEE,System error on correctable error enable" "Disabled,Enabled"
line.word 0x06 "ROOT_CAPABILITIES,PCI Express Root Capabilities"
bitfld.word 0x06 0. "CRSSWV,CRS software visibility" "Not visible,Visible"
group.long 0x90++0x03
line.long 0x00 "ROOT_STATUS,PCI Express Root Status Register"
bitfld.long 0x00 17. "PMEP,PME pending" "Not pending,Pending"
eventfld.long 0x00 16. "PMES,PME status" "0,1"
newline
hexmask.long.word 0x00 0.--15. 1. "PME_REQUESTER_ID,PME requester ID"
endif
rgroup.long 0x94++0x03
line.long 0x00 "DEVICE_CAPABILITIES_2,PCI Express Device Capabilities 2 Register"
bitfld.long 0x00 5. "ARI_FWD,ARI forwarding supported" "Not supported,Supported"
bitfld.long 0x00 4. "CPL_TO_DS,Completion timeout disable supported" "Not supported,Supported"
newline
bitfld.long 0x00 0.--3. "CPL_TO_RS,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.word 0x98++0x01
line.word 0x00 "DEVICE_CONTROL_2,PCI Express Device Control 2 Register"
bitfld.word 0x00 9. "IDO_CPL_EN,IDO completion enable" "Disabled,Enabled"
bitfld.word 0x00 8. "IDO_REQ_EN,IDO request enable" "Disabled,Enabled"
newline
bitfld.word 0x00 5. "ARIFE,ARI forwarding enable" "Disabled,Enabled"
bitfld.word 0x00 4. "CPL_TOD,Completion timeout disable" "No,Yes"
newline
bitfld.word 0x00 0.--3. "CPL_TO_VAL,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x9C++0x03
line.long 0x00 "LINK_CAPABILITIES_2,PCI Express Link Capabilities 2 Register"
bitfld.long 0x00 8. "CROSSLINK_SUPPORTED,Crosslink supported" "Not supported,Supported"
bitfld.long 0x00 3. "SUPPORT_LINK_SPEED_VECTOR[3],8.0 GT/s link speed support" "Not supported,Supported"
newline
bitfld.long 0x00 2. "[2],5.0 GT/s link speed support" "Not supported,Supported"
bitfld.long 0x00 1. "[1],2.5 GT/s link speed support" "Not supported,Supported"
group.word 0xA0++0x01
line.word 0x00 "LINK_CONTROL_2,PCI Express Link Control 2 Register"
bitfld.word 0x00 12.--15. "CDE,Compliance present/de-emphasis" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.word 0x00 11. "CSOS,Compliance SOS" "0,1"
newline
bitfld.word 0x00 10. "EMC,Enter modified compliance" "0,1"
bitfld.word 0x00 7.--9. "TXM,Transmit margin" "0,1,2,3,4,5,6,7"
newline
bitfld.word 0x00 6. "SDE,Selectable de-emphasis" "0,1"
bitfld.word 0x00 5. "HWASD,Hardware autonomous speed disable" "No,Yes"
newline
bitfld.word 0x00 4. "EC,Enter compliance" "0,1"
bitfld.word 0x00 0.--3. "T_LS,Target link speed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0xA2++0x01
line.word 0x00 "LINK_STATUS_2,PCI Express Link Status 2 Register"
bitfld.word 0x00 5. "LER,Link equalization request" "Not requested,Requested"
bitfld.word 0x00 4. "EP3S,Equalization phase 3 successful" "Not successful,Successful"
newline
bitfld.word 0x00 3. "EP2S,Equalization phase 2 successful" "Not successful,Successful"
bitfld.word 0x00 2. "EP1S,Equalization phase 1 successful" "Not successful,Successful"
newline
bitfld.word 0x00 1. "EC,Equalization complete" "Not completed,Completed"
bitfld.word 0x00 0. "DE_LVL,Current de-emphasis level" "0,1"
rgroup.word 0x100++0x01
line.word 0x00 "ADVANCED_ERROR_REPORTING_CAPABILITY_ID,PCI Express Advanced Error Reporting Capability ID Register"
group.long 0x104++0x13
line.long 0x00 "UNCORRECTABLE_ERROR_STATUS,PCI Express Uncorrectable Error Status Register"
eventfld.long 0x00 20. "URE,Unsupported request error status" "No error,Error"
eventfld.long 0x00 19. "ECRCE,ECRC error status" "No error,Error"
newline
eventfld.long 0x00 18. "MTLP,Malformed TLP status" "No error,Error"
eventfld.long 0x00 17. "RXO,Receiver overflow status" "No error,Error"
newline
eventfld.long 0x00 16. "UC,Unexpected completion status" "No error,Error"
eventfld.long 0x00 15. "CA,Completer abort status" "No error,Error"
newline
eventfld.long 0x00 14. "CTO,Completion timeout status" "No error,Error"
eventfld.long 0x00 13. "FCPE,Flow control protocol error status" "No error,Error"
newline
eventfld.long 0x00 12. "PTLP,Poisoned TLP status" "No error,Error"
eventfld.long 0x00 4. "DLPE,Data link protocol error status" "No error,Error"
line.long 0x04 "UNCORRECTABLE_ERROR_MASK,PCI Express Uncorrectable Error Mask Register"
bitfld.long 0x04 20. "UREM,Unsupported request error mask" "Not masked,Masked"
bitfld.long 0x04 19. "ECRCEM,ECRC error mask" "Not masked,Masked"
newline
bitfld.long 0x04 18. "MTLPM,Malformed TLP mask" "Not masked,Masked"
bitfld.long 0x04 17. "RXOM,Receiver overflow mask" "Not masked,Masked"
newline
bitfld.long 0x04 16. "UCM,Unexpected completion mask" "Not masked,Masked"
bitfld.long 0x04 15. "CAM,Completer abort mask" "Not masked,Masked"
newline
bitfld.long 0x04 14. "CTOM,Completion timeout mask" "Not masked,Masked"
bitfld.long 0x04 13. "FCPEM,Flow control protocol error mask" "Not masked,Masked"
newline
bitfld.long 0x04 12. "PTLPM,Poisoned TLP mask" "Not masked,Masked"
bitfld.long 0x04 4. "DLPEM,Data link protocol error mask" "Not masked,Masked"
line.long 0x08 "UNCORRECTABLE_ERROR_SEVERITY,PCI Express Uncorrectable Error Severity Register"
bitfld.long 0x08 20. "URES,Unsupported request error severity" "Not severe,Severe"
bitfld.long 0x08 19. "ECRCES,ECRC error severity" "Not severe,Severe"
newline
bitfld.long 0x08 18. "MTLPS,Malformed TLP severity" "Not severe,Severe"
bitfld.long 0x08 17. "RXOS,Receiver overflow severity" "Not severe,Severe"
newline
bitfld.long 0x08 16. "UCS,Unexpected completion severity" "Not severe,Severe"
bitfld.long 0x08 15. "CAS,Completer abort severity" "Not severe,Severe"
newline
bitfld.long 0x08 14. "CTOS,Completion timeout severity" "Not severe,Severe"
bitfld.long 0x08 13. "FCPES,Flow control protocol error severity" "Not severe,Severe"
newline
bitfld.long 0x08 12. "PTLPS,Poisoned TLP severity" "Not severe,Severe"
bitfld.long 0x08 4. "DLPES,Data link protocol error severity" "Not severe,Severe"
line.long 0x0C "CORRECTABLE_ERROR_STATUS,PCI Express Correctable Error Status Register"
eventfld.long 0x0C 13. "ADVNFE,Advisory non-fatal error status" "No error,Error"
eventfld.long 0x0C 12. "RTTO,Replay timer timeout status" "No error,Error"
newline
eventfld.long 0x0C 8. "RNR,REPLAY_NUM rollover status" "No error,Error"
eventfld.long 0x0C 7. "BDLLP,Bad DLLP status" "No error,Error"
newline
eventfld.long 0x0C 6. "BTLP,Bad TLP status" "No error,Error"
eventfld.long 0x0C 0. "RXE,Receiver error status" "No error,Error"
line.long 0x10 "CORRECTABLE_ERROR_MASK,PCI Express Correctable Error Mask Register"
bitfld.long 0x10 13. "ADVNFEM,Advisory non-fatal error mask" "Not masked,Masked"
bitfld.long 0x10 12. "RTTOM,Replay timer timeout mask" "Not masked,Masked"
newline
bitfld.long 0x10 8. "RNRM,REPLAY_NUM rollover mask" "Not masked,Masked"
bitfld.long 0x10 7. "BDLLPM,Bad DLLP mask" "Not masked,Masked"
newline
bitfld.long 0x10 6. "BTLPM,Bad TLP mask" "Not masked,Masked"
bitfld.long 0x10 0. "RXEM,Receiver error mask" "Not masked,Masked"
group.long 0x118++0x03
line.long 0x00 "ADVANCED_ERROR_CAPABILITIES_AND_CONTROL,PCI Express Advanced Error Capabilities and Control Register"
bitfld.long 0x00 8. "ECRCCE,ECRC checking enable" "Disabled,Enabled"
rbitfld.long 0x00 7. "ECRCCC,ECRC checking capable" "Not capable,Capable"
newline
bitfld.long 0x00 6. "ECRCGE,ECRC generation enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "ECRCGC,ECRC generation capable" "Not capable,Capable"
newline
rhexmask.long.byte 0x00 0.--4. 0x01 "FIRST_ERROR_POINTER,Identifies the bit position of the first error reported in the uncorrectable error status register"
rgroup.long 0x11C++0x0F
line.long 0x00 "HEADER_LOG_REGISTER_DWORD1,PCI Express Header Log Register 1"
hexmask.long.byte 0x00 24.--31. 1. "BYTE_0,Byte 0 of the TLP header associated with the error"
hexmask.long.byte 0x00 16.--23. 1. "BYTE_1,Byte 1 of the TLP header associated with the error"
newline
hexmask.long.byte 0x00 8.--15. 1. "BYTE_2,Byte 2 of the TLP header associated with the error"
hexmask.long.byte 0x00 0.--7. 1. "BYTE_3,Byte 3 of the TLP header associated with the error"
line.long 0x04 "HEADER_LOG_REGISTER_DWORD2,PCI Express Header Log Register 2"
hexmask.long.byte 0x04 24.--31. 1. "BYTE_4,Byte 4 of the TLP header associated with the error"
hexmask.long.byte 0x04 16.--23. 1. "BYTE_5,Byte 5 of the TLP header associated with the error"
newline
hexmask.long.byte 0x04 8.--15. 1. "BYTE_6,Byte 6 of the TLP header associated with the error"
hexmask.long.byte 0x04 0.--7. 1. "BYTE_7,Byte 7 of the TLP header associated with the error"
line.long 0x08 "HEADER_LOG_REGISTER_DWORD3,PCI Express Header Log Register 3"
hexmask.long.byte 0x08 24.--31. 1. "BYTE_8,Byte 8 of the TLP header associated with the error"
hexmask.long.byte 0x08 16.--23. 1. "BYTE_9,Byte 9 of the TLP header associated with the error"
newline
hexmask.long.byte 0x08 8.--15. 1. "BYTE_A,Byte 10 of the TLP header associated with the error"
hexmask.long.byte 0x08 0.--7. 1. "BYTE_B,Byte 11 of the TLP header associated with the error"
line.long 0x0C "HEADER_LOG_REGISTER_DWORD4,PCI Express Header Log Register 4"
hexmask.long.byte 0x0C 24.--31. 1. "BYTE_C,Byte 12 of the TLP header associated with the error"
hexmask.long.byte 0x0C 16.--23. 1. "BYTE_D,Byte 13 of the TLP header associated with the error"
newline
hexmask.long.byte 0x0C 8.--15. 1. "BYTE_E,Byte 14 of the TLP header associated with the error"
hexmask.long.byte 0x0C 0.--7. 1. "BYTE_F,Byte 15 of the TLP header associated with the error"
group.long 0x12C++0x07
line.long 0x00 "ROOT_ERROR_COMMAND,PCI Express Root Error Command Register"
bitfld.long 0x00 2. "FERE,Fatal error reporting enable" "Disabled,Enabled"
bitfld.long 0x00 1. "NFERE,Non-fatal error reporting enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "CERE,Correctable error reporting enable" "Disabled,Enabled"
line.long 0x04 "ROOT_ERROR_STATUS,PCI Express Root Error Status Register"
rbitfld.long 0x04 27.--31. "AEIMN,Advanced error interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
eventfld.long 0x04 6. "FEMR,Fatal error messages received" "Not received,Received"
newline
eventfld.long 0x04 5. "NFEMR,Non-fatal error messages received" "Not received,Received"
eventfld.long 0x04 4. "FUF,First uncorrectable fatal" "0,1"
newline
eventfld.long 0x04 3. "MEFNFR,Multiple ERR_FATAL/NONFATAL received" "Not received,Received"
eventfld.long 0x04 2. "EFNFR,ERR_FATAL/NONFATAL received" "Not received,Received"
newline
eventfld.long 0x04 1. "MECR,Multiple ERR_COR received" "Not received,Received"
eventfld.long 0x04 0. "ECR,ERR_COR received" "Not received,Received"
rgroup.word 0x134++0x03
line.word 0x00 "CORRECTABLE_ERROR_SOURCE_ID,PCI Express Correctable Error Source ID Register"
line.word 0x02 "ERROR_SOURCE_ID,PCI Express Error Source ID Register"
rgroup.long 0x148++0x03
line.long 0x00 "SPCIE_CAP_HEADER_REG,Secondary PCIE Capability Header Register"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_OFFSET,Pointer to the next capability structure"
bitfld.long 0x00 16.--19. "CAP_VERSION,Version of the capability structure present" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "EXTENDED_CAP_ID,PCI express extended capability ID"
group.long 0x14C++0x03
line.long 0x00 "LINK_CONTROL3_REG,Link Control 3 Register"
bitfld.long 0x00 1. "EQ_REQ_INT_EN,Link equalization request interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "PERFORM_EQ,Perform equalization" "Not performed,Performed"
group.long 0x150++0x03
line.long 0x00 "LANE_ERR_STATUS_REG,Lane Error Status Register"
eventfld.long 0x00 3. "LANE_ERR_STATUS[3],Lane 4 detected a lane-based error" "Not detected,Detected"
eventfld.long 0x00 2. "[2],Lane 3 detected a lane-based error" "Not detected,Detected"
newline
eventfld.long 0x00 1. "[1],Lane 2 detected a lane-based error" "Not detected,Detected"
eventfld.long 0x00 0. "[0],Lane 1 detected a lane-based error" "Not detected,Detected"
repeat 4. (increment 0x154 0x02)(increment 0. 1.)
rgroup.word $1++0x01
line.word 0x00 "LANE$2_EQUALIZATION_CONTROL,Lane Equalization Control Register"
bitfld.word 0x00 12.--14. "USP_RX_PRESET_HINT,Upstream port receiver preset hint" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 8.--11. "USP_TX_PRESET,Upstream port transmitter preset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.word 0x00 4.--6. "DSP_RX_PRESET_HINT,Downstream port receiver preset hint" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 0.--3. "DSP_TX_PRESET,Downstream port transmitter preset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x71C++0x03
line.long 0x00 "SYMBOL_TIMER_FILTER_1_OFF,Symbol Timer and Filter Mask 1 Register"
bitfld.long 0x00 31. "CX_FLT_MASK_RC_CFG_DISCARD,CFG transaction being received RC filter allowance" "Not allowed,Allowed"
bitfld.long 0x00 30. "CX_FLT_MASK_RC_IO_DISCARD,IO transaction being received RC filter allowance" "Not allowed,Allowed"
newline
bitfld.long 0x00 29. "CX_FLT_MASK_MSG_DROP,MSG TLP drop" "Dropped,Not dropped"
bitfld.long 0x00 28. "CX_FLT_MASK_CPL_ECRC_DISCARD,Completions with ECRC errors treatment" "Discarded,Allowed"
newline
bitfld.long 0x00 27. "CX_FLT_MASK_ECRC_DISCARD,TLPs with ECRC errors treatment" "Discarded,Allowed"
bitfld.long 0x00 26. "CX_FLT_MASK_CPL_LEN_MATCH,Enforce length match for completion" "Enforced,Not enforced"
newline
bitfld.long 0x00 25. "CX_FLT_MASK_CPL_ATTR_MATCH,Enforce attribute match for completions" "Enforced,Not enforced"
bitfld.long 0x00 24. "CX_FLT_MASK_CPL_TC_MATCH,Enforce traffic class match for completions" "Enforced,Not enforced"
newline
bitfld.long 0x00 23. "CX_FLT_MASK_CPL_FUNC_MATCH,Enforce function match for completions" "Enforced,Not enforced"
bitfld.long 0x00 22. "CX_FLT_MASK_CPL_REQID_MATCH,Enforce req ID match for completions" "Enforced,Not enforced"
newline
bitfld.long 0x00 21. "CX_FLT_MASK_CPL_TAGERR_MATCH,Enforce tag error rules for completions" "Enforced,Not enforced"
bitfld.long 0x00 20. "CX_FLT_MASK_LOCKED_RD_AS_UR,Locked read TLPs for EP/RC treatment" "UR/Supported,Supported/UR"
newline
bitfld.long 0x00 19. "CX_FLT_MASK_CFG_TYPE1_RE_AS_UR,CFG type1 TLPs for EP/RC treatment" "UR/Supported,Supported/UR"
bitfld.long 0x00 18. "CX_FLT_MASK_UR_OUTSIDE_BAR,Out-of-bar TLPs as UR treatment" "Treated,Not treated"
newline
bitfld.long 0x00 17. "CX_FLT_MASK_UR_POIS,Poisoned request TLPs as UR treatment" "Treated,Not treated"
bitfld.long 0x00 16. "CX_FLT_MASK_UR_FUNC_MISMATCH,Function mismatched TLPs as UR treatment" "Treated,Not treated"
newline
bitfld.long 0x00 15. "DISABLE_FC_WD_TIMER,Disable FC watchdog timer" "No,Yes"
hexmask.long.word 0x00 0.--10. 1. "SKP_INT_VAL,SKP interval value"
group.long 0x890++0x03
line.long 0x00 "GEN3_RELATED_OFF,Gen3 Control Register"
bitfld.long 0x00 16. "GEN3_EQUALIZATION_DISABLE,Equalization disable" "No,Yes"
bitfld.long 0x00 12. "RXEQ_PH01_EN,Rx equalization phase 0/phase 1 hold enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "EQ_EIEOS_CNT,Equalization EIEOS count reset disable" "No,Yes"
group.long 0x8BC++0x03
line.long 0x00 "MISC_CONTROL_1_OFF,DBI Read-Only Write Enable Register"
bitfld.long 0x00 0. "RO_WR_EN,Read-only write enable" "Disabled,Enabled"
group.long 0x8E0++0x07
line.long 0x00 "COHERENCY_CONTROL_1_OFF,Coherency Control 1"
hexmask.long 0x00 2.--31. 0x04 "CFG_MEMTYPE_BOUNDARY_LOW_ADDR,Boundary lower address for memory type"
bitfld.long 0x00 0. "CFG_MEMTYPE_VALUE,Memory type" "CCSR/Memory,?..."
line.long 0x04 "COHERENCY_CONTROL_2_OFF,Coherency Control 2"
hgroup.long 0x8E8++0x03
hide.long 0x00 "COHERENCY_CONTROL_3_OFF,Coherency Control 3"
group.long 0x900++0x03
line.long 0x00 "IATU_VIEWPORT_OFF,IATU Index Register"
bitfld.long 0x00 31. "REGION_DIR,Region direction" "Outbound,Inbound"
hexmask.long.byte 0x00 0.--7. 1. "REGION_INDEX,Region index"
if (((per.l(ad:0x3400000+0x900))&0x80000000)==0x80000000)
if (((per.l(ad:0x1E00000+0x13C))&0x20)==0x20)
group.long 0x904++0x03
line.long 0x00 "IATU_REGION_CTRL_1_OFF_INBOUND_0,IATU Region Control 1 Register"
bitfld.long 0x00 20.--24. "CTRL_1_FUNC_NUM,Function number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--17. "AT,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3"
newline
bitfld.long 0x00 0.--4. "TYPE,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x908++0x03
line.long 0x00 "IATU_REGION_CTRL_2_OFF_INBOUND_0,IATU Region Control 2 Register"
bitfld.long 0x00 31. "REGION_EN,Region enable" "Disabled,Enabled"
bitfld.long 0x00 30. "MATCH_MODE,Match mode" "Address/Routing ID/Address,BAR/Accept/Vendor ID"
newline
bitfld.long 0x00 19. "FUNC_NUM_MATCH_EN,Function number match enable" "Disabled,Enabled"
bitfld.long 0x00 18. "AT_MATCH_EN,AT match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8.--10. "BAR_NUM,BAR number" "BAR 0,BAR 1,BAR 2,BAR 3,BAR 4,BAR 5,ROM,?..."
else
group.long 0x904++0x03
line.long 0x00 "IATU_REGION_CTRL_1_OFF_INBOUND_0,IATU Region Control 1 Register"
bitfld.long 0x00 16.--17. "AT,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3"
bitfld.long 0x00 0.--4. "TYPE,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x908++0x03
line.long 0x00 "IATU_REGION_CTRL_2_OFF_INBOUND_0,IATU Region Control 2 Register"
bitfld.long 0x00 31. "REGION_EN,Region enable" "Disabled,Enabled"
bitfld.long 0x00 30. "MATCH_MODE,Match mode" "Address/Routing ID/Address,BAR/Accept/Vendor ID"
newline
bitfld.long 0x00 18. "AT_MATCH_EN,AT match enable" "Disabled,Enabled"
endif
group.long 0x90C++0x13
line.long 0x00 "IATU_LWR_BASE_ADDR_OFF_INBOUND_0,IATU Lower Base Address Register"
hexmask.long.tbyte 0x00 12.--31. 0x10 "LWR_BASE_RW,Forms bits [31:12] of the start address of the address region to be translated"
hexmask.long.word 0x00 0.--11. 0x01 "LWR_BASE_HW,Forms bits [11:0] of the start address of the address region to be translated"
line.long 0x04 "IATU_UPPER_BASE_ADDR_OFF_INBOUND_0,IATU Upper Base Address Register"
line.long 0x08 "IATU_LIMIT_ADDR_OFF_INBOUND_0,IATU Limit Address Register"
hexmask.long.tbyte 0x08 12.--31. 0x10 "LIMIT_ADDR_RW,Forms bits [31:12] of the end address of the address region to be translated"
hexmask.long.word 0x08 0.--11. 0x01 "LIMIT_ADDR_HW,Forms bits [11:0] of the end address of the address region to be translated"
line.long 0x0C "IATU_LWR_TARGET_ADDR_OFF_INBOUND_0,IATU Region#N Lower Offset Address Register"
hexmask.long.tbyte 0x0C 12.--31. 0x10 "LWR_TARGET_RW,Forms bits [31:12] of the of the new address of the translated region"
hexmask.long.word 0x0C 0.--11. 0x01 "LWR_TARGET_HW,Forms bits [11:0] of the start address of the new address of the translated region"
line.long 0x10 "IATU_UPPER_TARGET_ADDR_OFF_INBOUND_0,IATU Upper Target Address Register"
else
group.long 0x904++0x1B
line.long 0x00 "IATU_REGION_CTRL_1_OFF_OUTBOUND_0,IATU Region Control 1 Register"
bitfld.long 0x00 16.--17. "AT,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3"
bitfld.long 0x00 9.--10. "ATTR,When the ATTR field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3"
newline
bitfld.long 0x00 8. "TD,When the TD field of an inbound TLP is matched to this value then address translation proceeds" "0,1"
bitfld.long 0x00 5.--7. "TC,When the TC field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--4. "TYPE,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "IATU_REGION_CTRL_2_OFF_OUTBOUND_0,IATU Region Control 2 Register"
bitfld.long 0x04 31. "REGION_EN,Region enable" "Disabled,Enabled"
bitfld.long 0x04 28. "CFG_SHIFT_MODE,CFG shift mode" "Not shifted,Shifted"
newline
hexmask.long.byte 0x04 0.--7. 1. "MSG_CODE,Message code"
line.long 0x08 "IATU_LWR_BASE_ADDR_OFF_OUTBOUND_0,IATU Lower Base Address Register"
hexmask.long.tbyte 0x08 12.--31. 0x10 "LWR_BASE_RW,Forms bits [31:12] of the start address of the address region to be translated"
hexmask.long.word 0x08 0.--11. 0x01 "LWR_BASE_HW,Forms bits [11:0] of the start address of the address region to be translated"
line.long 0x0C "IATU_UPPER_BASE_ADDR_OFF_OUTBOUND_0,IATU Upper Base Address Register"
line.long 0x10 "IATU_LIMIT_ADDR_OFF_OUTBOUND_0,IATU Limit Address Register"
hexmask.long.tbyte 0x10 12.--31. 0x10 "LIMIT_ADDR_RW,Forms bits [31:12] of the end address of the address region to be translated"
hexmask.long.word 0x10 0.--11. 0x01 "LIMIT_ADDR_HW,Forms bits [11:0] of the end address of the address region to be translated"
line.long 0x14 "IATU_LWR_TARGET_ADDR_OFF_OUTBOUND_0,IATU Outbound Region#N Lower Offset Address Register"
hexmask.long.tbyte 0x14 12.--31. 0x10 "LWR_TARGET_RW,Forms bits [31:12] of the of the new address of the translated region"
hexmask.long.word 0x14 0.--11. 0x01 "LWR_TARGET_HW,Forms bits [11:0] of the start address of the new address of the translated region"
line.long 0x18 "IATU_UPPER_TARGET_ADDR_OFF_OUTBOUND_0,IATU Upper Target Address Register"
endif
wgroup.long 0x1010++0x07
line.long 0x00 "BAR0_MASK,Base Address 0 Mask Register"
hexmask.long 0x00 1.--31. 1. "MASK,Mask"
bitfld.long 0x00 0. "BAR_EN,Bar enable" "Disabled,Enabled"
line.long 0x04 "BAR1_MASK,Base Address 1 Mask Register"
hexmask.long 0x04 1.--31. 1. "MASK,Mask"
bitfld.long 0x04 0. "BAR_EN,Bar enable" "Disabled,Enabled"
if (((per.l(ad:0x1E00000+0x13C))&0x20)==0x20)
wgroup.long 0x1018++0x0F
line.long 0x00 "BAR2_MASK,Base Address 2 Mask Register"
hexmask.long 0x00 1.--31. 1. "MASK,Mask"
bitfld.long 0x00 0. "BAR_EN,Bar enable" "Disabled,Enabled"
line.long 0x04 "BAR3_MASK,Base Address 3 Mask Register"
hexmask.long 0x04 1.--31. 1. "MASK,Mask"
bitfld.long 0x04 0. "BAR_EN,Bar enable" "Disabled,Enabled"
line.long 0x08 "BAR4_MASK,Base Address 4 Mask Register"
hexmask.long 0x08 1.--31. 1. "MASK,Mask"
bitfld.long 0x08 0. "BAR_EN,Bar enable" "Disabled,Enabled"
line.long 0x0C "BAR5_MASK,Base Address 5 Mask Register"
hexmask.long 0x0C 1.--31. 1. "MASK,Mask"
bitfld.long 0x0C 0. "BAR_EN,Bar enable" "Disabled,Enabled"
wgroup.long 0x1030++0x03
line.long 0x00 "EXP_ROM_BAR_MASK_EP,Expansion ROM Base Address Mask Register"
hexmask.long 0x00 1.--31. 1. "MASK,Expansion ROM BAR Mask"
bitfld.long 0x00 0. "BAR_EN,Expansion ROM BAR enable" "Disabled,Enabled"
else
hgroup.long 0x1018++0x03
hide.long 0x00 "BAR2_MASK,Base Address 2 Mask Register"
hgroup.long 0x101C++0x03
hide.long 0x00 "BAR3_MASK,Base Address 3 Mask Register"
hgroup.long 0x1020++0x03
hide.long 0x00 "BAR4_MASK,Base Address 4 Mask Register"
hgroup.long 0x1024++0x03
hide.long 0x00 "BAR5_MASK,Base Address 5 Mask Register"
wgroup.long 0x1038++0x03
line.long 0x00 "EXP_ROM_BAR_MASK_RC,Expansion ROM Base Address Mask Register"
hexmask.long.tbyte 0x00 11.--31. 1. "MASK,Expansion ROM BAR Mask"
bitfld.long 0x00 0. "BAR_EN,Expansion ROM BAR enable" "Disabled,Enabled"
endif
tree.end
tree "PEX1_LUT Registers"
base ad:(0x3400000+0x80000)
group.long 0x20++0x07
line.long 0x00 "PEXLSR,PEX LUT Status Register"
eventfld.long 0x00 31. "LUTM,Lookup table miss" "Not missed,Missed"
eventfld.long 0x00 30. "MLUTM,Multiple lookup table miss" "Not missed,Missed"
hexmask.long.word 0x00 0.--15. 1. "CREQID,Captured REQID"
line.long 0x04 "PEXLCR,PEX LUT Control Register"
bitfld.long 0x04 31. "DPL,Default privilege level" "0,1"
bitfld.long 0x04 30. "DBMT,Default bypass memory translation" "0,1"
hexmask.long.word 0x04 0.--14. 1. "DICID,Default isolation context ID"
repeat 32. (increment 0x00 0x08)(increment 0. 1.)
group.long ($1+0x800)++0x07
line.long 0x00 "PEX_LUT_PEXL$2UDR,PEX LUT Entry $2 Upper Data Register"
hexmask.long.word 0x00 16.--31. 1. "REQID,The request ID of entry $2 of the PEX lookup table"
hexmask.long.word 0x00 0.--15. 1. "MASK,The mask field of entry $2 of the PEX lookup table"
line.long 0x04 "PEX_LUT_PEXL$2LDR,PEX LUT Entry $2 Lower Data Register"
bitfld.long 0x04 31. "EN,The enable field of entry $2 within the PEX lookup table" "Disabled,Enabled"
bitfld.long 0x04 30. "PL,The privilege level field of entry $2 within the PEX lookup table" "0,1"
bitfld.long 0x04 29. "BMT,Bypass memory translation" "0,1"
newline
hexmask.long.word 0x04 0.--14. 1. "ICID,Isolation context ID"
repeat.end
group.long 0x40014++0x03
line.long 0x00 "PEX_PF0_CONFIG,PEX PF0 Config Register"
bitfld.long 0x00 0. "CFG_READY,Config ready" "Not ready,Ready"
rgroup.long 0x40018++0x03
line.long 0x00 "PEX_PF0_INT_STAT,PEX PF 0 Interrupt Status Register"
bitfld.long 0x00 15. "INTM,Per PF dependent message interrupt is pending" "Not pending,Pending"
bitfld.long 0x00 14. "INTE,Per PF dependent error interrupt is pending" "Not pending,Pending"
group.long 0x40020++0x0B
line.long 0x00 "PEX_PF0_PME_MES_DR,PEX PF 0 PCIE PME and Message Detect Register"
eventfld.long 0x00 15. "PTO,Indicates that PME turn off was detected" "Not detected,Detected"
eventfld.long 0x00 13. "ENL23,Indicates that PCIe core entered L2/L3 ready state" "Not detected,Detected"
eventfld.long 0x00 12. "EXL23,Indicates that PCIe core exited L2/L3 ready state" "Not detected,Detected"
newline
eventfld.long 0x00 10. "HRD,Indicates a hot reset was detected" "Not detected,Detected"
eventfld.long 0x00 9. "LDD,Indicates a link down was detected" "Not detected,Detected"
eventfld.long 0x00 7. "LUD,Indicates a link up was detected" "Not detected,Detected"
line.long 0x04 "PEX_PF0_PME_MES_DISR,PEX PF 0 PCIE PME and Message Disable Register"
bitfld.long 0x04 15. "PTOD,PME turn off detect disabled" "No,Yes"
bitfld.long 0x04 13. "ENL23D,Entered L2/L3 ready state detect disabled" "No,Yes"
bitfld.long 0x04 12. "EXL23D,Exited L2/L3 ready state detect disable" "No,Yes"
newline
bitfld.long 0x04 10. "HRDD,Hot reset detect disable" "No,Yes"
bitfld.long 0x04 9. "LDDD,Link down detect disable" "No,Yes"
bitfld.long 0x04 7. "LUDD,Link up detect disable" "No,Yes"
line.long 0x08 "PEX_PF0_PME_MES_IER,PEX PF 0 PCIE PME And Message Interrupt Enable Register"
bitfld.long 0x08 15. "PTOIE,PME turn off interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 13. "ENL23IE,Entered L2/L3 ready state detect interrupt enabled" "Disabled,Enabled"
bitfld.long 0x08 12. "EXL23IE,Exited L2/L3 ready state detect interrupt enabled" "Disabled,Enabled"
newline
bitfld.long 0x08 10. "HRDIE,Hot reset detect interrupt enabled" "Disabled,Enabled"
bitfld.long 0x08 9. "LDDIE,Link down detect interrupt enabled" "Disabled,Enabled"
bitfld.long 0x08 7. "LUDIE,Link up detect interrupt enabled" "Disabled,Enabled"
if (((per.l(ad:0x1E00000+0x13C))&0x20)==0x00)
group.long 0x4002C++0x03
line.long 0x00 "PEX_PF0_MCR,PEX PF 0 PCIE Message Command Register"
bitfld.long 0x00 4. "INTX,Assert/de-assert intx command" "Not asserted,Asserted"
bitfld.long 0x00 2. "SPMES,Send PM_PME command" "Not sent,Sent"
bitfld.long 0x00 1. "EXL2S,Exit L2 state command" "Not generated,Generated"
newline
bitfld.long 0x00 0. "PTOMR,Generate PME turn off message" "Not generated,Generated"
else
group.long 0x4002C++0x03
line.long 0x00 "PEX_PF0_MCR,PEX PF 0 PCIE Message Command Register"
bitfld.long 0x00 4. "INTX,Assert/de-assert intx command" "Not asserted,Asserted"
bitfld.long 0x00 2. "SPMES,Send PM_PME command" "Not sent,Sent"
bitfld.long 0x00 1. "EXL2S,Exit L2 state command" "Not generated,Generated"
endif
group.long 0x40140++0x03
line.long 0x00 "PEX_PF0_RBP_ADDR_U,PEX PF 0 Route By Port Address Upper Register"
hexmask.long.word 0x00 16.--31. 1. "ADDR_U,Upper 16 bit of the PCIE slave device used for the outbound transactions"
group.long 0x40200++0x03
line.long 0x00 "PEX_PF0_ERR_DR,PEX PF 0 PCIE Error Detect Register"
eventfld.long 0x00 31. "ME,Indicates multiple errors of same type" "Not detected,Detected"
eventfld.long 0x00 23. "PCT,Indicates completion timeout" "Not detected,Detected"
eventfld.long 0x00 21. "PCAC,Completer abort was detected" "Not detected,Detected"
newline
eventfld.long 0x00 19. "CDNSC,Completion with data not successful was detected" "Not detected,Detected"
eventfld.long 0x00 2. "UREP,Indicates an unsupported request completion was detected" "Not detected,Detected"
group.long 0x40208++0x03
line.long 0x00 "PEX_PF0_ERR_EN,PEX PF 0 PCIE Error Interrupt Enable Register"
bitfld.long 0x00 23. "PCTIE,Completion timeout interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 21. "PCACIE,Completer abort interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 19. "CDNSCIE,Completion with data not successful interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "UREPIE,Unsupported request in EP mode interrupt enable" "Disabled,Enabled"
group.long 0x40210++0x03
line.long 0x00 "PEX_PF0_ERR_DISR,PEX PF 0 PCIE Error Disable Register"
eventfld.long 0x00 31. "MED,Multiple errors of same type detection disable" "No,Yes"
newline
bitfld.long 0x00 23. "PCTD,Completion detection disable" "No,Yes"
bitfld.long 0x00 21. "PCACD,Completer abort detection disable" "No,Yes"
bitfld.long 0x00 19. "CDNSCD,Completion with data not successful detection disable" "No,Yes"
newline
bitfld.long 0x00 2. "UREPD,Unsupported request in EP mode detection disable" "No,Yes"
group.long 0x407FC++0x03
line.long 0x00 "PEX_PF0_DBG,PEX PF0 Debug Register"
bitfld.long 0x00 31. "WE,Write enable" "Disabled,Enabled"
bitfld.long 0x00 30. "SR,Soft reset" "No reset,Reset"
rbitfld.long 0x00 0.--5. "LTSSM,Link training status state machine (LTSSM) status" "DETECT_QUIET,DETECT_ACTIVE,POLL_ACTIVE,POLL_COMPLIANCE,POLL_CONFIG,PRE_DETECT_QUIET,DETECT_WAIT,CFG_LINKWD_START,CFG_LINKWD_ACEPT,CFG_LANENUM_WAIT,CFG_LANENUM_ACEPT,CFG_COMPLETE,CFG_IDLE,RCVRY_LOCK,RCVRY_SPEED,RCVRY_RCVRCFG,RCVRY_IDLE,L0,L0S,L123_SEND_EIDLE,L1_IDLE,L2_IDLE,L2_WAKE,DISABLED_ENTRY,DISABLED_IDLE,DISABLED,LPBK_ENTRY,LPBK_ACTIVE,LPBK_EXIT,LPBK_EXIT_TIMEOUT,HOT_RESET_ENTRY,HOT_RESET,RCVRY_EQ0,RCVRY_EQ1,RCVRY_EQ2,RCVRY_EQ3,?..."
tree.end
tree.end
tree "PEX2 (PCI Express Interface Controller 2)"
tree "Configuration Registers"
base ad:0x3500000
rgroup.word 0x00++0x03
line.word 0x00 "VENDOR_ID,PCI Express Vendor ID Register"
line.word 0x02 "DEVICE_ID,PCI Express Device ID Register"
abitfld.word 0x02 0.--15. "DEVICE_ID,DEVICE_ID" "0x82C0=LS1028A with security,0x82C1=LS1028A without security,0x82C4=LS1027A with security,0x82C5=LS1027A without security,0x82E0=LS1018A with security,0x82E1=LS1018A without security,0x82E4=LS1017A with security,0x82E5=LS1017A without security"
group.word 0x04++0x03
line.word 0x00 "COMMAND,PCI Express Command Register"
bitfld.word 0x00 10. "INTERRUPT_DISABLE,Interrupt disable" "No,Yes"
bitfld.word 0x00 8. "SERR,SERR# enable" "Disabled,Enabled"
newline
bitfld.word 0x00 6. "PARITY_ERROR_RESPONSE,Parity error response" "No response,Response"
bitfld.word 0x00 2. "BUS_MASTER,Bus master enable" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "MEMORY_SPACE,Memory space enable" "Disabled,Enabled"
rbitfld.word 0x00 0. "IO_SPACE,I/O space enable" "Disabled,Enabled"
line.word 0x02 "STATUS,PCI Express Status Register"
eventfld.word 0x02 15. "DETECTED_PARITY_ERROR,Detected parity error" "No error,Error"
eventfld.word 0x02 14. "SIGNALED_SYSTEM_ERROR,Signaled system error" "No error,Error"
newline
eventfld.word 0x02 13. "RECEIVED_MASTER_ABORT,Received master abort" "Not received,Received"
eventfld.word 0x02 12. "RECEIVED_TARGET_ABORT,Received target abort" "Not received,Received"
newline
eventfld.word 0x02 11. "SIGNALED_TARGET_ABORT,Signaled target abort" "Not signaled,Signaled"
eventfld.word 0x02 8. "MASTER_DATA_PARITY_ERROR_DETECTED,Master data parity error detected" "No error,Error"
newline
eventfld.word 0x02 4. "CAPABILITIES_LIST,Capabilities list" "Not implemented,Implemented"
eventfld.word 0x02 3. "INTERRUPT_STATUS,Interrupt status" "No interrupt,Interrupt"
rgroup.byte 0x08++0x00
line.byte 0x00 "REVISION_ID,PCI Express Revision ID Register"
rgroup.tbyte 0x09++0x02
line.tbyte 0x00 "CLASS_CODE,PCI Express Class Code Register"
hexmask.tbyte.byte 0x00 16.--23. 1. "BASE_CLASS,Base class"
hexmask.tbyte.byte 0x00 8.--15. 1. "SUB_CLASS,Sub-class"
newline
hexmask.tbyte.byte 0x00 0.--7. 1. "PROGRAMMING_INTERFACE,Programming interface"
group.byte 0x0C++0x00
line.byte 0x00 "CACHE_LINE_SIZE,PCI Express Cache Line Size Register"
rgroup.byte 0x0D++0x01
line.byte 0x00 "LATENCY_TIMER,PCI Express Latency Timer Register"
line.byte 0x01 "HEADER_TYPE,PCI Express Header Type Register"
bitfld.byte 0x01 7. "MULTIFUNCTION,Identifies whether a device supports multiple functions" "Single,Multiple"
abitfld.byte 0x01 0.--6. "HEADER_LAYOUT,Header layout" "0x00=Endpoint - Type 0,0x01=Root Complex - Type 1"
group.long 0x10++0x03
line.long 0x00 "BAR0,PCI Express Base Address Register 0"
hexmask.long.tbyte 0x00 12.--31. 0x10 "ADDRESS,Indicates the base address of the inbound memory window"
bitfld.long 0x00 3. "PREF,Prefetchable" "Not prefetchable,Prefetchable"
newline
bitfld.long 0x00 1.--2. "TYPE,Type" "Locate anywhere/32-bit,?..."
bitfld.long 0x00 0. "MEMSP,Memory space indicator" "Memory space,I/O space"
if (((per.l(ad:0x1E00000+0x13C))&0x40)==0x40)
group.long 0x14++0x13
line.long 0x00 "BAR1,PCI Express Base Address Register 1"
hexmask.long.tbyte 0x00 12.--31. 0x10 "ADDRESS,Indicates the base address of the inbound memory window"
bitfld.long 0x00 3. "PREF,Prefetchable" "Not prefetchable,Prefetchable"
newline
bitfld.long 0x00 1.--2. "TYPE,Type" "Locate anywhere/32-bit,?..."
bitfld.long 0x00 0. "MEMSP,Memory space indicator" "Memory space,I/O space"
line.long 0x04 "BAR2,PCI Express Base Address Register 2"
hexmask.long.tbyte 0x04 12.--31. 0x10 "ADDRESS,Indicates the lower portion of the base address of the inbound memory window"
bitfld.long 0x04 3. "PREF,Prefetchable" "Not prefetchable,Prefetchable"
newline
bitfld.long 0x04 1.--2. "TYPE,Type" "Locate anywhere/32-bit,,Locate anywhere/64-bit,?..."
bitfld.long 0x04 0. "MEMSP,Memory space indicator" "Memory space,I/O space"
line.long 0x08 "BAR3,PCI Express Base Address Register 3"
line.long 0x0C "BAR4,PCI Express Base Address Register 4"
hexmask.long.tbyte 0x0C 12.--31. 0x10 "ADDRESS,Indicates the lower portion of the base address of the inbound memory window"
bitfld.long 0x0C 3. "PREF,Prefetchable" "Not prefetchable,Prefetchable"
newline
bitfld.long 0x0C 1.--2. "TYPE,Type" "Locate anywhere/32-bit,,Locate anywhere/64-bit,?..."
bitfld.long 0x0C 0. "MEMSP,Memory space indicator" "Memory space,I/O space"
line.long 0x10 "BAR5,PCI Express Base Address Register 5"
rgroup.word 0x2C++0x03
line.word 0x00 "SUBSYSTEM_VENDOR_ID,PCI Express Subsystem Vendor ID Register"
line.word 0x02 "SUBSYSTEM_ID,PCI Express Subsystem ID Register"
group.long 0x30++0x03
line.long 0x00 "EXPANSION_ROM_BAR_TYPE0,PCI Express Expansion ROM Base Address Register"
hexmask.long.tbyte 0x00 11.--31. 0x08 "ROM_BASE_ADDRESS,Specifies bits 31:11 of the non-prefetchable expansion ROM space start address"
bitfld.long 0x00 0. "ROMBAR_EN,Address decode enable" "Disabled,Enabled"
else
group.byte 0x18++0x02
line.byte 0x00 "PRIMARY_BUS_NUMBER,PCI Express Primary Bus Number Register"
line.byte 0x01 "SECONDARY_BUS_NUMBER,PCI Express Secondary Bus Number Register"
line.byte 0x02 "SUBORDINATE_BUS_NUMBER,PCI Express Subordinate Bus Number Register"
group.byte 0x1C++0x01
line.byte 0x00 "IO_BASE,PCI Express I/O Base Register"
bitfld.byte 0x00 4.--7. "IO_START_ADDRESS,Specifies bits 15:12 of the I/O space start address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.byte 0x00 0.--3. "ADDRESS_DECODE_TYPE,Specifies the number of I/O address bits" "16-bit,32-bit,?..."
line.byte 0x01 "IO_LIMIT,PCI Express I/O Limit Register"
bitfld.byte 0x01 4.--7. "IO_LIMIT_ADDRESS,Specifies bits 15:12 of the I/O space ending address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.byte 0x01 0.--3. "ADDRESS_DECODE_TYPE,Specifies the number of I/O address bits" "16-bit,32-bit,?..."
group.word 0x1E++0x09
line.word 0x00 "SECONDARY_STATUS,PCI Express Secondary Status Register"
eventfld.word 0x00 15. "DPE,Detected parity error" "Not detected,Detected"
eventfld.word 0x00 14. "SSE,Signaled system error" "Not signaled,Signaled"
newline
eventfld.word 0x00 13. "RMA,Received master abort" "Not received,Received"
eventfld.word 0x00 12. "RTA,Received target abort" "Not received,Received"
newline
eventfld.word 0x00 11. "STA,Signaled target abort" "Not signaled,Signaled"
eventfld.word 0x00 8. "MDPE,Master data parity error" "No error,Error"
line.word 0x02 "MEMORY_BASE,PCI Express Memory Base Register"
hexmask.word 0x02 4.--15. 0x10 "MEMORY_BASE,Specifies bits 31:20 of the non-prefetchable memory space start address"
line.word 0x04 "MEMORY_LIMIT,PCI Express Memory Limit Register"
hexmask.word 0x04 4.--15. 0x10 "MEMORY_LIMIT,Specifies bits 31:20 of the non-prefetchable memory space ending address"
line.word 0x06 "PREFETCHABLE_MEMORY_BASE,PCI Express Prefetchable Memory Base Register"
hexmask.word 0x06 4.--15. 0x10 "PF_MEMORY_BASE,Specifies bits 31:20 of the prefetchable memory space start address"
rbitfld.word 0x06 0.--3. "ADDRESS_DECODE_TYPE,Specifies the number of prefetchable memory address bits" "32-bit,64-bit,?..."
line.word 0x08 "PREFETCHABLE_MEMORY_LIMIT,PCI Express Prefetchable Memory Limit Register"
hexmask.word 0x08 4.--15. 0x10 "PF_MEMORY_LIMIT,Specifies bits 31:20 of the prefetchable memory space ending address"
rbitfld.word 0x08 0.--3. "ADDRESS_DECODE_TYPE,Specifies the number of prefetchable memory address bits" "32-bit,64-bit,?..."
group.long 0x28++0x07
line.long 0x00 "PREFETCHABLE_BASE_UPPER_32_BITS,PCI Express Prefetchable Base Upper 32 Bits Register"
line.long 0x04 "PREFETCHABLE_LIMIT_UPPER_32_BITS,PCI Express Prefetchable Limit Upper 32 Bits Register"
rgroup.word 0x30++0x03
line.word 0x00 "IO_BASE_UPPER_16_BITS,PCI Express I/O Base Upper 16 Bits Register"
line.word 0x02 "IO_LIMIT_UPPER_16_BITS,PCI Express I/O Limit Upper 16 Bits Register"
endif
rgroup.byte 0x34++0x00
line.byte 0x00 "CAPABILITIES_POINTER,Capabilities Pointer Register"
if (((per.l(ad:0x1E00000+0x13C))&0x40)==0x00)
group.long 0x38++0x03
line.long 0x00 "EXPANSION_ROM_BAR_TYPE1,PCI Express Expansion ROM Base Address Register"
hexmask.long.tbyte 0x00 11.--31. 0x08 "ROM_BASE_ADDRESS,Specifies bits 31:11 of the non-prefetchable expansion ROM space start address"
bitfld.long 0x00 0. "ROMBAR_EN,Address decode enable" "Disabled,Enabled"
endif
group.byte 0x3C++0x00
line.byte 0x00 "INTERRUPT_LINE,PCI Express Interrupt Line Register"
rgroup.byte 0x3D++0x00
line.byte 0x00 "INTERRUPT_PIN,PCI Express Interrupt Pin Register"
bitfld.byte 0x00 0.--7. "INTERRUPT_PIN,Legacy INTx message used by this device" "Not used,INTA,?..."
if (((per.l(ad:0x1E00000+0x13C))&0x40)==0x40)
rgroup.byte 0x3E++0x01
line.byte 0x00 "MINIMUM_GRANT,PCI Express Minimum Grant Register"
line.byte 0x01 "MAXIMUM_LATENCY,PCI Express Maximum Latency Register"
else
group.word 0x3E++0x01
line.word 0x00 "BRIDGE_CONTROL,PCI Express Bridge Control Register"
bitfld.word 0x00 6. "SCND_RST,Secondary bus reset" "No reset,Reset"
bitfld.word 0x00 3. "VGA_EN,VGA enable" "Disabled,Enabled"
newline
bitfld.word 0x00 2. "ISA_EN,ISA enable" "Disabled,Enabled"
bitfld.word 0x00 1. "SERR_EN,SERR enable" "Disabled,Enabled"
newline
bitfld.word 0x00 0. "PER,Parity error response" "No response,Response"
endif
rgroup.byte 0x40++0x00
line.byte 0x00 "POWER_MANAGEMENT_CAPABILITY_ID,PCI Express Power Management Capability ID Register"
rgroup.word 0x42++0x01
line.word 0x00 "POWER_MANAGEMENT_CAPABILITIES,PCI Express Power Management Capabilities Register"
bitfld.word 0x00 11.--15. "PME_SUPPORT,Power states supported by this device" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 10. "D2,D2 support" "Not supported,Supported"
newline
bitfld.word 0x00 9. "D1,D1 support" "Not supported,Supported"
bitfld.word 0x00 6.--8. "AUX_CURR,AUX current" "0,1,2,3,4,5,6,7"
newline
bitfld.word 0x00 5. "DSI,Device specific initialization" "0,1"
bitfld.word 0x00 3. "PME_CLK,PME clock" "0,1"
newline
bitfld.word 0x00 0.--2. "VERSION,Version of the specification" "0,1,2,3,4,5,6,7"
group.word 0x44++0x01
line.word 0x00 "POWER_MANAGEMENT_STATUS_AND_CONTROL,PCI Express Power Management Status and Control Register"
eventfld.word 0x00 15. "PME_STAT,PME status" "0,1"
bitfld.word 0x00 13.--14. "DATA_SCALE,Data scale field" "0,1,2,3"
newline
bitfld.word 0x00 9.--12. "DATA_SELECT,Data select field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.word 0x00 8. "PME_EN,PME enable" "Disabled,Enabled"
newline
bitfld.word 0x00 0.--1. "POWER_STATE,Indicates the current power state of the function" "D0,D1,D2,D3"
rgroup.byte 0x47++0x00
line.byte 0x00 "POWER_MANAGEMENT_DATA,PCI Express Power Management Data Register"
if (((per.l(ad:0x1E00000+0x13C))&0x40)==0x40)
rgroup.byte 0x50++0x00
line.byte 0x00 "MSI_MESSAGE_CAPABILITY_ID,PCI Express MSI Message Capability ID Register"
group.word 0x52++0x01
line.word 0x00 "MSI_MESSAGE_CONTROL,PCI Express MSI Message Control Register"
rbitfld.word 0x00 7. "AC_64,64-bit address capable" "Not capable,Capable"
bitfld.word 0x00 4.--6. "MME,Multiple message enable" "0,1,2,3,4,5,6,7"
newline
rbitfld.word 0x00 1.--3. "MMC,Multiple message capable" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 0. "MSIE,MSI enable" "Disabled,Enabled"
group.long 0x54++0x07
line.long 0x00 "MSI_MESSAGE_ADDRESS,PCI Express MSI Message Address Register"
hexmask.long 0x00 2.--31. 0x04 "MESSAGE_ADDRESS,System-specified message address"
line.long 0x04 "MSI_MESSAGE_UPPER_ADDRESS,PCI Express MSI Message Upper Address Register"
group.word 0x5C++0x01
line.word 0x00 "MSI_MESSAGE_DATA,PCI Express MSI Message Data Register"
else
hgroup.byte 0x50++0x00
hide.byte 0x00 "MSI_MESSAGE_CAPABILITY_ID,PCI Express MSI Message Capability ID Register"
hgroup.word 0x52++0x01
hide.word 0x00 "MSI_MESSAGE_CONTROL,PCI Express MSI Message Control Register"
hgroup.long 0x54++0x03
hide.long 0x00 "MSI_MESSAGE_ADDRESS,PCI Express MSI Message Address Register"
hgroup.long 0x58++0x03
hide.long 0x00 "MSI_MESSAGE_UPPER_ADDRESS,PCI Express MSI Message Upper Address Register"
hgroup.word 0x5C++0x01
hide.word 0x00 "MSI_MESSAGE_DATA,PCI Express MSI Message Data Register"
endif
rgroup.byte 0x70++0x00
line.byte 0x00 "CAPABILITY_ID,PCI Express Capability ID Register"
if (((per.l(ad:0x1E00000+0x13C))&0x40)==0x00)
rgroup.word 0x72++0x01
line.word 0x00 "CAPABILITIES,PCI Express Capabilities Register"
bitfld.word 0x00 9.--13. "INTERRUPT_MESSAGE_NUMBER,Contains offset between base message data and the MSI message that is generated when any of the status bits are set" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.word 0x00 8. "SLOT,Slot implemented" "Not implemented,Implemented"
newline
bitfld.word 0x00 4.--7. "DEVICE_PORT_TYPE,Device/Port type" "EP mode,,,,RC mode,?..."
bitfld.word 0x00 0.--3. "CAPABILITY_VERSION,Indicates the defined PCI express capability structure version number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
rgroup.word 0x72++0x01
line.word 0x00 "CAPABILITIES,PCI Express Capabilities Register"
bitfld.word 0x00 9.--13. "INTERRUPT_MESSAGE_NUMBER,Contains offset between base Message Data and the MSI Message that is generated when any of the status bits are set" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.word 0x00 4.--7. "DEVICE_PORT_TYPE,Device/Port type" "EP mode,,,,RC mode,?..."
bitfld.word 0x00 0.--3. "CAPABILITY_VERSION,Indicates the defined PCI Express capability structure version number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
endif
rgroup.long 0x74++0x03
line.long 0x00 "DEVICE_CAPABILITIES,PCI Express Device Capabilities Register"
bitfld.long 0x00 28. "FLRC,Functional level reset capability" "0,1"
bitfld.long 0x00 26.--27. "CSPLS,Captured slot power limit scale" "0,1,2,3"
newline
hexmask.long.word 0x00 18.--25. 1. "CSPLV,Captured slot power limit value"
bitfld.long 0x00 15. "RBER,Role-based error reporting" "0,1"
newline
bitfld.long 0x00 9.--11. "EP_L1_LAT,Endpoint L1 acceptable latency" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 6.--8. "EP_L0S_LAT,Endpoint L0s acceptable latency" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 5. "ET,Extended tag field supported" "0,1"
bitfld.long 0x00 3.--4. "PHAN_FCT,Phantom functions supported" "0,1,2,3"
newline
bitfld.long 0x00 0.--2. "MAX_PL_SIZE_SUP,Max_payload_size supported" ",256-bytes,?..."
group.word 0x78++0x03
line.word 0x00 "DEVICE_CONTROL,PCI Express Device Control Register"
bitfld.word 0x00 15. "IFLR,Initiate functional level reset" "No reset,Reset"
bitfld.word 0x00 12.--14. "MAX_READ_SIZE,Maximum_read_request_size" "0,1,2,3,4,5,6,7"
newline
bitfld.word 0x00 11. "ENS,Enable no snoop" "Disabled,Enabled"
bitfld.word 0x00 10. "APE,AUX power PM enable" "Disabled,Enabled"
newline
bitfld.word 0x00 9. "PFE,Phantom functions enable" "Disabled,Enabled"
bitfld.word 0x00 8. "ETE,Extended tag field enable" "Disabled,Enabled"
newline
bitfld.word 0x00 5.--7. "MAX_PAYLOAD_SIZE,Max_payload_size" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 4. "RO,Enable relaxed ordering" "Disabled,Enabled"
newline
bitfld.word 0x00 3. "URR,Unsupported request reporting enable" "Disabled,Enabled"
bitfld.word 0x00 2. "FER,Fatal error reporting enable" "Disabled,Enabled"
newline
bitfld.word 0x00 1. "NFER,Non-fatal error reporting enable" "Disabled,Enabled"
bitfld.word 0x00 0. "CER,Correctable error reporting enable" "Disabled,Enabled"
line.word 0x02 "DEVICE_STATUS,PCI Express Device Status Register"
rbitfld.word 0x02 5. "TP,Transactions pending" "Not pending,Pending"
rbitfld.word 0x02 4. "APD,AUX power detected" "Not detected,Detected"
newline
eventfld.word 0x02 3. "URD,Unsupported request detected" "Not detected,Detected"
eventfld.word 0x02 2. "FED,Fatal error detected" "Not detected,Detected"
newline
eventfld.word 0x02 1. "NFED,Non-fatal error detected" "Not detected,Detected"
eventfld.word 0x02 0. "CED,Correctable error detected" "Not detected,Detected"
rgroup.long 0x7C++0x03
line.long 0x00 "LINK_CAPABILITIES,PCI Express Link Capabilities Register"
hexmask.long.byte 0x00 24.--31. 1. "PORT_NUMBER,Port number"
bitfld.long 0x00 22. "AOC,ASPM optionality compliance" "0,1"
newline
bitfld.long 0x00 21. "LBWN,Link bandwidth notification capability" "Not capable,Capable"
bitfld.long 0x00 20. "DLLARC,Data link layer active reporting capable" "Not capable,Capable"
newline
bitfld.long 0x00 19. "SD_ERR_RPT_CAP,Surprise down error reporting capable" "Not capable,Capable"
bitfld.long 0x00 18. "CPM,Clock power management" "0,1"
newline
bitfld.long 0x00 15.--17. "L1_EX_LAT,L1 exit latency" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 12.--14. "L0S_EX_LAT,L0s exit latency" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 10.--11. "ASPM,Active state power management (ASPM) support" "0,1,2,3"
bitfld.long 0x00 4.--9. "MAX_LINK_W,Maximum link width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 0.--3. "MAX_LINK_SP,Maximum link speed" ",2.5 GT/s,5.0 GT/s,8.0 GT/s,?..."
if (((per.l(ad:0x1E00000+0x13C))&0x40)==0x40)
group.word 0x80++0x01
line.word 0x00 "LINK_CONTROL,PCI Express Link Control Register"
bitfld.word 0x00 11. "LABIE,Link autonomous bandwidth interrupt enable" "Disabled,Enabled"
bitfld.word 0x00 10. "LBMIE,Link bandwidth management interrupt enable" "Disabled,Enabled"
newline
bitfld.word 0x00 9. "HW_AUTO_WIDTH_DIS,Hardware Autonomous Width Disable" "No,Yes"
bitfld.word 0x00 8. "ECPM,Enable clock power management" "Disabled,Enabled"
newline
bitfld.word 0x00 7. "EXT_SYNC,Extended synch" "0,1"
bitfld.word 0x00 6. "CCC,Common clock configuration" "0,1"
newline
bitfld.word 0x00 3. "RCB,Read completion boundary" "0,1"
bitfld.word 0x00 0.--1. "ASPM_CTL,Active state power management (ASPM) control" "0,1,2,3"
rgroup.word 0x82++0x01
line.word 0x00 "LINK_STATUS,PCI Express Link Status Register"
bitfld.word 0x00 15. "LABS,Link autonomous bandwidth status" "0,1"
bitfld.word 0x00 14. "LBMS,Link bandwidth management status" "0,1"
newline
bitfld.word 0x00 12. "SCC,Slot clock configuration" "0,1"
bitfld.word 0x00 11. "LT,Link training" "0,1"
newline
bitfld.word 0x00 4.--9. "NEG_LINK_W,Negotiated link width" ",x1,x2,,x4,?..."
bitfld.word 0x00 0.--3. "LINK_SP,Negotiated link speed" ",2.5GT/s,5.0GT/s,8.0GT/s,?..."
hgroup.long 0x84++0x03
hide.long 0x00 "SLOT_CAPABILITIES,PCI Express Slot Capabilities Register"
hgroup.word 0x88++0x01
hide.word 0x00 "SLOT_CONTROL,PCI Express Slot Control Register"
hgroup.word 0x8A++0x01
hide.word 0x00 "SLOT_STATUS,PCI Express Slot Status Register"
hgroup.word 0x8C++0x01
hide.word 0x00 "ROOT_CONTROL,PCI Express Root Control Register"
hgroup.word 0x8E++0x01
hide.word 0x00 "ROOT_CAPABILITIES,PCI Express Root Capabilities"
hgroup.long 0x90++0x03
hide.long 0x00 "ROOT_STATUS,PCI Express Root Status Register"
else
group.word 0x80++0x03
line.word 0x00 "LINK_CONTROL,PCI Express Link Control Register"
bitfld.word 0x00 11. "LABIE,Link autonomous bandwidth interrupt enable" "Disabled,Enabled"
bitfld.word 0x00 10. "LBMIE,Link bandwidth management interrupt enable" "Disabled,Enabled"
newline
bitfld.word 0x00 9. "HW_AUTO_WIDTH_DIS,Hardware Autonomous Width Disable" "No,Yes"
bitfld.word 0x00 8. "ECPM,Enable clock power management" "Disabled,Enabled"
newline
bitfld.word 0x00 7. "EXT_SYNC,Extended synch" "0,1"
bitfld.word 0x00 6. "CCC,Common clock configuration" "0,1"
newline
bitfld.word 0x00 5. "RL,Retrain link" "No effect,Initiated"
bitfld.word 0x00 4. "LD,Link disable" "No,Yes"
newline
bitfld.word 0x00 3. "RCB,Read completion boundary" "0,1"
bitfld.word 0x00 0.--1. "ASPM_CTL,Active state power management (ASPM) control" "0,1,2,3"
line.word 0x02 "LINK_STATUS,PCI Express Link Status Register"
eventfld.word 0x02 15. "LABS,Link autonomous bandwidth status" "0,1"
eventfld.word 0x02 14. "LBMS,Link bandwidth management status" "0,1"
newline
rbitfld.word 0x02 12. "SCC,Slot clock configuration" "0,1"
rbitfld.word 0x02 11. "LT,Link training" "0,1"
newline
rbitfld.word 0x02 4.--9. "NEG_LINK_W,Negotiated link width" ",x1,x2,,x4,,,,x8,?..."
rbitfld.word 0x02 0.--3. "LINK_SP,Negotiated link speed" ",2.5GT/s,5.0GT/s,8.0GT/s,?..."
rgroup.long 0x84++0x03
line.long 0x00 "SLOT_CAPABILITIES,PCI Express Slot Capabilities Register"
hexmask.long.word 0x00 19.--31. 1. "PHYSICAL_SLOT_NUMBER,Indicates the physical slot number attached to this port"
bitfld.long 0x00 18. "NOCMDCPLSUP,No command completed support" "0,1"
newline
bitfld.long 0x00 17. "EMIP,Electromechanical interlock present" "Not present,Present"
bitfld.long 0x00 15.--16. "SPLS,Slot power limit scale" "0,1,2,3"
newline
hexmask.long.word 0x00 7.--14. 1. "SPLV,Slot power limit value"
bitfld.long 0x00 6. "HPD,Hot-plug capable" "Not capable,Capable"
newline
bitfld.long 0x00 5. "HPS,Hot-plug surprise" "0,1"
bitfld.long 0x00 4. "PIP,Power indicator present" "Not present,Present"
newline
bitfld.long 0x00 3. "AIP,Attention indicator present" "Not present,Present"
bitfld.long 0x00 2. "MRLSP,MRL sensor present" "Not present,Present"
newline
bitfld.long 0x00 1. "PCP,Power controller present" "Not present,Present"
bitfld.long 0x00 0. "ABP,Attention button present" "Not present,Present"
group.word 0x88++0x07
line.word 0x00 "SLOT_CONTROL,PCI Express Slot Control Register"
bitfld.word 0x00 12. "DLLSTCHGEN,Data link layer state changed enable" "Disabled,Enabled"
bitfld.word 0x00 11. "EMICTL,Electromechanical interlock control" "0,1"
newline
bitfld.word 0x00 10. "PCC,Power controller control" "0,1"
bitfld.word 0x00 8.--9. "PIC,Power indicator control" ",On,Blink,Off"
newline
bitfld.word 0x00 6.--7. "AIC,Attention indicator control" ",On,Blink,Off"
bitfld.word 0x00 5. "HPIE,Hot plug interrupt enable" "Disabled,Enabled"
newline
bitfld.word 0x00 4. "CCIE,Command completed interrupt enable" "Disabled,Enabled"
bitfld.word 0x00 3. "PDCE,Presence detect changed enable" "Disabled,Enabled"
newline
bitfld.word 0x00 2. "MRLSCE,MRL sensor changed enable" "Disabled,Enabled"
bitfld.word 0x00 1. "PFDE,Power fault detected enable" "Disabled,Enabled"
newline
bitfld.word 0x00 0. "ABPE,Attention button pressed enable" "Disabled,Enabled"
line.word 0x02 "SLOT_STATUS,PCI Express Slot Status Register"
eventfld.word 0x02 8. "DLLSTCHG,Data link layer state changed" "Not changed,Changed"
bitfld.word 0x02 7. "EM_IL_ST,Electromechanical interlock status" "0,1"
newline
rbitfld.word 0x02 6. "PDS,Indicates presence of an adapter in the slot" "Not present,Present"
rbitfld.word 0x02 5. "MRLSS,MRL sensor state" "Closed,Open"
newline
eventfld.word 0x02 4. "CC,Command completed" "Not completed,Completed"
eventfld.word 0x02 3. "PDC,Presence detect changed" "Not changed,Changed"
newline
eventfld.word 0x02 2. "MRLSC,MRL sensor changed" "Not changed,Changed"
eventfld.word 0x02 1. "PFD,Power fault detected" "Not detected,Detected"
newline
eventfld.word 0x02 0. "ABP,Attention button pressed" "Not pressed,Pressed"
line.word 0x04 "ROOT_CONTROL,PCI Express Root Control Register"
bitfld.word 0x04 4. "CRSSWVE,CRS software visibility enable" "Disabled,Enabled"
bitfld.word 0x04 3. "PMEIE,PME interrupt enable" "Disabled,Enabled"
newline
bitfld.word 0x04 2. "SEFEE,System error on fatal error enable" "Disabled,Enabled"
bitfld.word 0x04 1. "SENFEE,System error on non-fatal error enable" "Disabled,Enabled"
newline
bitfld.word 0x04 0. "SECEE,System error on correctable error enable" "Disabled,Enabled"
line.word 0x06 "ROOT_CAPABILITIES,PCI Express Root Capabilities"
bitfld.word 0x06 0. "CRSSWV,CRS software visibility" "Not visible,Visible"
group.long 0x90++0x03
line.long 0x00 "ROOT_STATUS,PCI Express Root Status Register"
bitfld.long 0x00 17. "PMEP,PME pending" "Not pending,Pending"
eventfld.long 0x00 16. "PMES,PME status" "0,1"
newline
hexmask.long.word 0x00 0.--15. 1. "PME_REQUESTER_ID,PME requester ID"
endif
rgroup.long 0x94++0x03
line.long 0x00 "DEVICE_CAPABILITIES_2,PCI Express Device Capabilities 2 Register"
bitfld.long 0x00 5. "ARI_FWD,ARI forwarding supported" "Not supported,Supported"
bitfld.long 0x00 4. "CPL_TO_DS,Completion timeout disable supported" "Not supported,Supported"
newline
bitfld.long 0x00 0.--3. "CPL_TO_RS,Completion timeout ranges supported" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.word 0x98++0x01
line.word 0x00 "DEVICE_CONTROL_2,PCI Express Device Control 2 Register"
bitfld.word 0x00 9. "IDO_CPL_EN,IDO completion enable" "Disabled,Enabled"
bitfld.word 0x00 8. "IDO_REQ_EN,IDO request enable" "Disabled,Enabled"
newline
bitfld.word 0x00 5. "ARIFE,ARI forwarding enable" "Disabled,Enabled"
bitfld.word 0x00 4. "CPL_TOD,Completion timeout disable" "No,Yes"
newline
bitfld.word 0x00 0.--3. "CPL_TO_VAL,Completion timeout value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0x9C++0x03
line.long 0x00 "LINK_CAPABILITIES_2,PCI Express Link Capabilities 2 Register"
bitfld.long 0x00 8. "CROSSLINK_SUPPORTED,Crosslink supported" "Not supported,Supported"
bitfld.long 0x00 3. "SUPPORT_LINK_SPEED_VECTOR[3],8.0 GT/s link speed support" "Not supported,Supported"
newline
bitfld.long 0x00 2. "[2],5.0 GT/s link speed support" "Not supported,Supported"
bitfld.long 0x00 1. "[1],2.5 GT/s link speed support" "Not supported,Supported"
group.word 0xA0++0x01
line.word 0x00 "LINK_CONTROL_2,PCI Express Link Control 2 Register"
bitfld.word 0x00 12.--15. "CDE,Compliance present/de-emphasis" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.word 0x00 11. "CSOS,Compliance SOS" "0,1"
newline
bitfld.word 0x00 10. "EMC,Enter modified compliance" "0,1"
bitfld.word 0x00 7.--9. "TXM,Transmit margin" "0,1,2,3,4,5,6,7"
newline
bitfld.word 0x00 6. "SDE,Selectable de-emphasis" "0,1"
bitfld.word 0x00 5. "HWASD,Hardware autonomous speed disable" "No,Yes"
newline
bitfld.word 0x00 4. "EC,Enter compliance" "0,1"
bitfld.word 0x00 0.--3. "T_LS,Target link speed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.word 0xA2++0x01
line.word 0x00 "LINK_STATUS_2,PCI Express Link Status 2 Register"
bitfld.word 0x00 5. "LER,Link equalization request" "Not requested,Requested"
bitfld.word 0x00 4. "EP3S,Equalization phase 3 successful" "Not successful,Successful"
newline
bitfld.word 0x00 3. "EP2S,Equalization phase 2 successful" "Not successful,Successful"
bitfld.word 0x00 2. "EP1S,Equalization phase 1 successful" "Not successful,Successful"
newline
bitfld.word 0x00 1. "EC,Equalization complete" "Not completed,Completed"
bitfld.word 0x00 0. "DE_LVL,Current de-emphasis level" "0,1"
rgroup.word 0x100++0x01
line.word 0x00 "ADVANCED_ERROR_REPORTING_CAPABILITY_ID,PCI Express Advanced Error Reporting Capability ID Register"
group.long 0x104++0x13
line.long 0x00 "UNCORRECTABLE_ERROR_STATUS,PCI Express Uncorrectable Error Status Register"
eventfld.long 0x00 20. "URE,Unsupported request error status" "No error,Error"
eventfld.long 0x00 19. "ECRCE,ECRC error status" "No error,Error"
newline
eventfld.long 0x00 18. "MTLP,Malformed TLP status" "No error,Error"
eventfld.long 0x00 17. "RXO,Receiver overflow status" "No error,Error"
newline
eventfld.long 0x00 16. "UC,Unexpected completion status" "No error,Error"
eventfld.long 0x00 15. "CA,Completer abort status" "No error,Error"
newline
eventfld.long 0x00 14. "CTO,Completion timeout status" "No error,Error"
eventfld.long 0x00 13. "FCPE,Flow control protocol error status" "No error,Error"
newline
eventfld.long 0x00 12. "PTLP,Poisoned TLP status" "No error,Error"
eventfld.long 0x00 4. "DLPE,Data link protocol error status" "No error,Error"
line.long 0x04 "UNCORRECTABLE_ERROR_MASK,PCI Express Uncorrectable Error Mask Register"
bitfld.long 0x04 20. "UREM,Unsupported request error mask" "Not masked,Masked"
bitfld.long 0x04 19. "ECRCEM,ECRC error mask" "Not masked,Masked"
newline
bitfld.long 0x04 18. "MTLPM,Malformed TLP mask" "Not masked,Masked"
bitfld.long 0x04 17. "RXOM,Receiver overflow mask" "Not masked,Masked"
newline
bitfld.long 0x04 16. "UCM,Unexpected completion mask" "Not masked,Masked"
bitfld.long 0x04 15. "CAM,Completer abort mask" "Not masked,Masked"
newline
bitfld.long 0x04 14. "CTOM,Completion timeout mask" "Not masked,Masked"
bitfld.long 0x04 13. "FCPEM,Flow control protocol error mask" "Not masked,Masked"
newline
bitfld.long 0x04 12. "PTLPM,Poisoned TLP mask" "Not masked,Masked"
bitfld.long 0x04 4. "DLPEM,Data link protocol error mask" "Not masked,Masked"
line.long 0x08 "UNCORRECTABLE_ERROR_SEVERITY,PCI Express Uncorrectable Error Severity Register"
bitfld.long 0x08 20. "URES,Unsupported request error severity" "Not severe,Severe"
bitfld.long 0x08 19. "ECRCES,ECRC error severity" "Not severe,Severe"
newline
bitfld.long 0x08 18. "MTLPS,Malformed TLP severity" "Not severe,Severe"
bitfld.long 0x08 17. "RXOS,Receiver overflow severity" "Not severe,Severe"
newline
bitfld.long 0x08 16. "UCS,Unexpected completion severity" "Not severe,Severe"
bitfld.long 0x08 15. "CAS,Completer abort severity" "Not severe,Severe"
newline
bitfld.long 0x08 14. "CTOS,Completion timeout severity" "Not severe,Severe"
bitfld.long 0x08 13. "FCPES,Flow control protocol error severity" "Not severe,Severe"
newline
bitfld.long 0x08 12. "PTLPS,Poisoned TLP severity" "Not severe,Severe"
bitfld.long 0x08 4. "DLPES,Data link protocol error severity" "Not severe,Severe"
line.long 0x0C "CORRECTABLE_ERROR_STATUS,PCI Express Correctable Error Status Register"
eventfld.long 0x0C 13. "ADVNFE,Advisory non-fatal error status" "No error,Error"
eventfld.long 0x0C 12. "RTTO,Replay timer timeout status" "No error,Error"
newline
eventfld.long 0x0C 8. "RNR,REPLAY_NUM rollover status" "No error,Error"
eventfld.long 0x0C 7. "BDLLP,Bad DLLP status" "No error,Error"
newline
eventfld.long 0x0C 6. "BTLP,Bad TLP status" "No error,Error"
eventfld.long 0x0C 0. "RXE,Receiver error status" "No error,Error"
line.long 0x10 "CORRECTABLE_ERROR_MASK,PCI Express Correctable Error Mask Register"
bitfld.long 0x10 13. "ADVNFEM,Advisory non-fatal error mask" "Not masked,Masked"
bitfld.long 0x10 12. "RTTOM,Replay timer timeout mask" "Not masked,Masked"
newline
bitfld.long 0x10 8. "RNRM,REPLAY_NUM rollover mask" "Not masked,Masked"
bitfld.long 0x10 7. "BDLLPM,Bad DLLP mask" "Not masked,Masked"
newline
bitfld.long 0x10 6. "BTLPM,Bad TLP mask" "Not masked,Masked"
bitfld.long 0x10 0. "RXEM,Receiver error mask" "Not masked,Masked"
group.long 0x118++0x03
line.long 0x00 "ADVANCED_ERROR_CAPABILITIES_AND_CONTROL,PCI Express Advanced Error Capabilities and Control Register"
bitfld.long 0x00 8. "ECRCCE,ECRC checking enable" "Disabled,Enabled"
rbitfld.long 0x00 7. "ECRCCC,ECRC checking capable" "Not capable,Capable"
newline
bitfld.long 0x00 6. "ECRCGE,ECRC generation enable" "Disabled,Enabled"
rbitfld.long 0x00 5. "ECRCGC,ECRC generation capable" "Not capable,Capable"
newline
rhexmask.long.byte 0x00 0.--4. 0x01 "FIRST_ERROR_POINTER,Identifies the bit position of the first error reported in the uncorrectable error status register"
rgroup.long 0x11C++0x0F
line.long 0x00 "HEADER_LOG_REGISTER_DWORD1,PCI Express Header Log Register 1"
hexmask.long.byte 0x00 24.--31. 1. "BYTE_0,Byte 0 of the TLP header associated with the error"
hexmask.long.byte 0x00 16.--23. 1. "BYTE_1,Byte 1 of the TLP header associated with the error"
newline
hexmask.long.byte 0x00 8.--15. 1. "BYTE_2,Byte 2 of the TLP header associated with the error"
hexmask.long.byte 0x00 0.--7. 1. "BYTE_3,Byte 3 of the TLP header associated with the error"
line.long 0x04 "HEADER_LOG_REGISTER_DWORD2,PCI Express Header Log Register 2"
hexmask.long.byte 0x04 24.--31. 1. "BYTE_4,Byte 4 of the TLP header associated with the error"
hexmask.long.byte 0x04 16.--23. 1. "BYTE_5,Byte 5 of the TLP header associated with the error"
newline
hexmask.long.byte 0x04 8.--15. 1. "BYTE_6,Byte 6 of the TLP header associated with the error"
hexmask.long.byte 0x04 0.--7. 1. "BYTE_7,Byte 7 of the TLP header associated with the error"
line.long 0x08 "HEADER_LOG_REGISTER_DWORD3,PCI Express Header Log Register 3"
hexmask.long.byte 0x08 24.--31. 1. "BYTE_8,Byte 8 of the TLP header associated with the error"
hexmask.long.byte 0x08 16.--23. 1. "BYTE_9,Byte 9 of the TLP header associated with the error"
newline
hexmask.long.byte 0x08 8.--15. 1. "BYTE_A,Byte 10 of the TLP header associated with the error"
hexmask.long.byte 0x08 0.--7. 1. "BYTE_B,Byte 11 of the TLP header associated with the error"
line.long 0x0C "HEADER_LOG_REGISTER_DWORD4,PCI Express Header Log Register 4"
hexmask.long.byte 0x0C 24.--31. 1. "BYTE_C,Byte 12 of the TLP header associated with the error"
hexmask.long.byte 0x0C 16.--23. 1. "BYTE_D,Byte 13 of the TLP header associated with the error"
newline
hexmask.long.byte 0x0C 8.--15. 1. "BYTE_E,Byte 14 of the TLP header associated with the error"
hexmask.long.byte 0x0C 0.--7. 1. "BYTE_F,Byte 15 of the TLP header associated with the error"
group.long 0x12C++0x07
line.long 0x00 "ROOT_ERROR_COMMAND,PCI Express Root Error Command Register"
bitfld.long 0x00 2. "FERE,Fatal error reporting enable" "Disabled,Enabled"
bitfld.long 0x00 1. "NFERE,Non-fatal error reporting enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "CERE,Correctable error reporting enable" "Disabled,Enabled"
line.long 0x04 "ROOT_ERROR_STATUS,PCI Express Root Error Status Register"
rbitfld.long 0x04 27.--31. "AEIMN,Advanced error interrupt message number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
eventfld.long 0x04 6. "FEMR,Fatal error messages received" "Not received,Received"
newline
eventfld.long 0x04 5. "NFEMR,Non-fatal error messages received" "Not received,Received"
eventfld.long 0x04 4. "FUF,First uncorrectable fatal" "0,1"
newline
eventfld.long 0x04 3. "MEFNFR,Multiple ERR_FATAL/NONFATAL received" "Not received,Received"
eventfld.long 0x04 2. "EFNFR,ERR_FATAL/NONFATAL received" "Not received,Received"
newline
eventfld.long 0x04 1. "MECR,Multiple ERR_COR received" "Not received,Received"
eventfld.long 0x04 0. "ECR,ERR_COR received" "Not received,Received"
rgroup.word 0x134++0x03
line.word 0x00 "CORRECTABLE_ERROR_SOURCE_ID,PCI Express Correctable Error Source ID Register"
line.word 0x02 "ERROR_SOURCE_ID,PCI Express Error Source ID Register"
rgroup.long 0x148++0x03
line.long 0x00 "SPCIE_CAP_HEADER_REG,Secondary PCIE Capability Header Register"
hexmask.long.word 0x00 20.--31. 0x10 "NEXT_OFFSET,Pointer to the next capability structure"
bitfld.long 0x00 16.--19. "CAP_VERSION,Version of the capability structure present" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.word 0x00 0.--15. 1. "EXTENDED_CAP_ID,PCI express extended capability ID"
group.long 0x14C++0x03
line.long 0x00 "LINK_CONTROL3_REG,Link Control 3 Register"
bitfld.long 0x00 1. "EQ_REQ_INT_EN,Link equalization request interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "PERFORM_EQ,Perform equalization" "Not performed,Performed"
group.long 0x150++0x03
line.long 0x00 "LANE_ERR_STATUS_REG,Lane Error Status Register"
eventfld.long 0x00 1. "LANE_ERR_STATUS[1],Lane 2 detected a lane-based error" "Not detected,Detected"
eventfld.long 0x00 0. "[0],Lane 1 detected a lane-based error" "Not detected,Detected"
repeat 2. (increment 0x154 0x02)(increment 0. 1.)
rgroup.word $1++0x01
line.word 0x00 "LANE$2_EQUALIZATION_CONTROL,Lane Equalization Control Register"
bitfld.word 0x00 12.--14. "USP_RX_PRESET_HINT,Upstream port receiver preset hint" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 8.--11. "USP_TX_PRESET,Upstream port transmitter preset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.word 0x00 4.--6. "DSP_RX_PRESET_HINT,Downstream port receiver preset hint" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 0.--3. "DSP_TX_PRESET,Downstream port transmitter preset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
group.long 0x71C++0x03
line.long 0x00 "SYMBOL_TIMER_FILTER_1_OFF,Symbol Timer and Filter Mask 1 Register"
bitfld.long 0x00 31. "CX_FLT_MASK_RC_CFG_DISCARD,CFG transaction being received RC filter allowance" "Not allowed,Allowed"
bitfld.long 0x00 30. "CX_FLT_MASK_RC_IO_DISCARD,IO transaction being received RC filter allowance" "Not allowed,Allowed"
newline
bitfld.long 0x00 29. "CX_FLT_MASK_MSG_DROP,MSG TLP drop" "Dropped,Not dropped"
bitfld.long 0x00 28. "CX_FLT_MASK_CPL_ECRC_DISCARD,Completions with ECRC errors treatment" "Discarded,Allowed"
newline
bitfld.long 0x00 27. "CX_FLT_MASK_ECRC_DISCARD,TLPs with ECRC errors treatment" "Discarded,Allowed"
bitfld.long 0x00 26. "CX_FLT_MASK_CPL_LEN_MATCH,Enforce length match for completion" "Enforced,Not enforced"
newline
bitfld.long 0x00 25. "CX_FLT_MASK_CPL_ATTR_MATCH,Enforce attribute match for completions" "Enforced,Not enforced"
bitfld.long 0x00 24. "CX_FLT_MASK_CPL_TC_MATCH,Enforce traffic class match for completions" "Enforced,Not enforced"
newline
bitfld.long 0x00 23. "CX_FLT_MASK_CPL_FUNC_MATCH,Enforce function match for completions" "Enforced,Not enforced"
bitfld.long 0x00 22. "CX_FLT_MASK_CPL_REQID_MATCH,Enforce req ID match for completions" "Enforced,Not enforced"
newline
bitfld.long 0x00 21. "CX_FLT_MASK_CPL_TAGERR_MATCH,Enforce tag error rules for completions" "Enforced,Not enforced"
bitfld.long 0x00 20. "CX_FLT_MASK_LOCKED_RD_AS_UR,Locked read TLPs for EP/RC treatment" "UR/Supported,Supported/UR"
newline
bitfld.long 0x00 19. "CX_FLT_MASK_CFG_TYPE1_RE_AS_UR,CFG type1 TLPs for EP/RC treatment" "UR/Supported,Supported/UR"
bitfld.long 0x00 18. "CX_FLT_MASK_UR_OUTSIDE_BAR,Out-of-bar TLPs as UR treatment" "Treated,Not treated"
newline
bitfld.long 0x00 17. "CX_FLT_MASK_UR_POIS,Poisoned request TLPs as UR treatment" "Treated,Not treated"
bitfld.long 0x00 16. "CX_FLT_MASK_UR_FUNC_MISMATCH,Function mismatched TLPs as UR treatment" "Treated,Not treated"
newline
bitfld.long 0x00 15. "DISABLE_FC_WD_TIMER,Disable FC watchdog timer" "No,Yes"
hexmask.long.word 0x00 0.--10. 1. "SKP_INT_VAL,SKP interval value"
group.long 0x890++0x03
line.long 0x00 "GEN3_RELATED_OFF,Gen3 Control Register"
bitfld.long 0x00 16. "GEN3_EQUALIZATION_DISABLE,Equalization disable" "No,Yes"
bitfld.long 0x00 12. "RXEQ_PH01_EN,Rx equalization phase 0/phase 1 hold enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "EQ_EIEOS_CNT,Equalization EIEOS count reset disable" "No,Yes"
group.long 0x8BC++0x03
line.long 0x00 "MISC_CONTROL_1_OFF,DBI Read-Only Write Enable Register"
bitfld.long 0x00 0. "RO_WR_EN,Read-only write enable" "Disabled,Enabled"
group.long 0x8E0++0x07
line.long 0x00 "COHERENCY_CONTROL_1_OFF,Coherency Control 1"
hexmask.long 0x00 2.--31. 0x04 "CFG_MEMTYPE_BOUNDARY_LOW_ADDR,Boundary lower address for memory type"
bitfld.long 0x00 0. "CFG_MEMTYPE_VALUE,Memory type" "CCSR/Memory,?..."
line.long 0x04 "COHERENCY_CONTROL_2_OFF,Coherency Control 2"
hgroup.long 0x8E8++0x03
hide.long 0x00 "COHERENCY_CONTROL_3_OFF,Coherency Control 3"
group.long 0x900++0x03
line.long 0x00 "IATU_VIEWPORT_OFF,IATU Index Register"
bitfld.long 0x00 31. "REGION_DIR,Region direction" "Outbound,Inbound"
hexmask.long.byte 0x00 0.--7. 1. "REGION_INDEX,Region index"
if (((per.l(ad:0x3500000+0x900))&0x80000000)==0x80000000)
if (((per.l(ad:0x1E00000+0x13C))&0x40)==0x40)
group.long 0x904++0x03
line.long 0x00 "IATU_REGION_CTRL_1_OFF_INBOUND_0,IATU Region Control 1 Register"
bitfld.long 0x00 20.--24. "CTRL_1_FUNC_NUM,Function number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 16.--17. "AT,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3"
newline
bitfld.long 0x00 0.--4. "TYPE,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x908++0x03
line.long 0x00 "IATU_REGION_CTRL_2_OFF_INBOUND_0,IATU Region Control 2 Register"
bitfld.long 0x00 31. "REGION_EN,Region enable" "Disabled,Enabled"
bitfld.long 0x00 30. "MATCH_MODE,Match mode" "Address/Routing ID/Address,BAR/Accept/Vendor ID"
newline
bitfld.long 0x00 19. "FUNC_NUM_MATCH_EN,Function number match enable" "Disabled,Enabled"
bitfld.long 0x00 18. "AT_MATCH_EN,AT match enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8.--10. "BAR_NUM,BAR number" "BAR 0,BAR 1,BAR 2,BAR 3,BAR 4,BAR 5,ROM,?..."
else
group.long 0x904++0x03
line.long 0x00 "IATU_REGION_CTRL_1_OFF_INBOUND_0,IATU Region Control 1 Register"
bitfld.long 0x00 16.--17. "AT,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3"
bitfld.long 0x00 0.--4. "TYPE,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x908++0x03
line.long 0x00 "IATU_REGION_CTRL_2_OFF_INBOUND_0,IATU Region Control 2 Register"
bitfld.long 0x00 31. "REGION_EN,Region enable" "Disabled,Enabled"
bitfld.long 0x00 30. "MATCH_MODE,Match mode" "Address/Routing ID/Address,BAR/Accept/Vendor ID"
newline
bitfld.long 0x00 18. "AT_MATCH_EN,AT match enable" "Disabled,Enabled"
endif
group.long 0x90C++0x13
line.long 0x00 "IATU_LWR_BASE_ADDR_OFF_INBOUND_0,IATU Lower Base Address Register"
hexmask.long.tbyte 0x00 12.--31. 0x10 "LWR_BASE_RW,Forms bits [31:12] of the start address of the address region to be translated"
hexmask.long.word 0x00 0.--11. 0x01 "LWR_BASE_HW,Forms bits [11:0] of the start address of the address region to be translated"
line.long 0x04 "IATU_UPPER_BASE_ADDR_OFF_INBOUND_0,IATU Upper Base Address Register"
line.long 0x08 "IATU_LIMIT_ADDR_OFF_INBOUND_0,IATU Limit Address Register"
hexmask.long.tbyte 0x08 12.--31. 0x10 "LIMIT_ADDR_RW,Forms bits [31:12] of the end address of the address region to be translated"
hexmask.long.word 0x08 0.--11. 0x01 "LIMIT_ADDR_HW,Forms bits [11:0] of the end address of the address region to be translated"
line.long 0x0C "IATU_LWR_TARGET_ADDR_OFF_INBOUND_0,IATU Region#N Lower Offset Address Register"
hexmask.long.tbyte 0x0C 12.--31. 0x10 "LWR_TARGET_RW,Forms bits [31:12] of the of the new address of the translated region"
hexmask.long.word 0x0C 0.--11. 0x01 "LWR_TARGET_HW,Forms bits [11:0] of the start address of the new address of the translated region"
line.long 0x10 "IATU_UPPER_TARGET_ADDR_OFF_INBOUND_0,IATU Upper Target Address Register"
else
group.long 0x904++0x1B
line.long 0x00 "IATU_REGION_CTRL_1_OFF_OUTBOUND_0,IATU Region Control 1 Register"
bitfld.long 0x00 16.--17. "AT,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3"
bitfld.long 0x00 9.--10. "ATTR,When the ATTR field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3"
newline
bitfld.long 0x00 8. "TD,When the TD field of an inbound TLP is matched to this value then address translation proceeds" "0,1"
bitfld.long 0x00 5.--7. "TC,When the TC field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 0.--4. "TYPE,When the TYPE field of an inbound TLP is matched to this value then address translation proceeds" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "IATU_REGION_CTRL_2_OFF_OUTBOUND_0,IATU Region Control 2 Register"
bitfld.long 0x04 31. "REGION_EN,Region enable" "Disabled,Enabled"
bitfld.long 0x04 28. "CFG_SHIFT_MODE,CFG shift mode" "Not shifted,Shifted"
newline
hexmask.long.byte 0x04 0.--7. 1. "MSG_CODE,Message code"
line.long 0x08 "IATU_LWR_BASE_ADDR_OFF_OUTBOUND_0,IATU Lower Base Address Register"
hexmask.long.tbyte 0x08 12.--31. 0x10 "LWR_BASE_RW,Forms bits [31:12] of the start address of the address region to be translated"
hexmask.long.word 0x08 0.--11. 0x01 "LWR_BASE_HW,Forms bits [11:0] of the start address of the address region to be translated"
line.long 0x0C "IATU_UPPER_BASE_ADDR_OFF_OUTBOUND_0,IATU Upper Base Address Register"
line.long 0x10 "IATU_LIMIT_ADDR_OFF_OUTBOUND_0,IATU Limit Address Register"
hexmask.long.tbyte 0x10 12.--31. 0x10 "LIMIT_ADDR_RW,Forms bits [31:12] of the end address of the address region to be translated"
hexmask.long.word 0x10 0.--11. 0x01 "LIMIT_ADDR_HW,Forms bits [11:0] of the end address of the address region to be translated"
line.long 0x14 "IATU_LWR_TARGET_ADDR_OFF_OUTBOUND_0,IATU Outbound Region#N Lower Offset Address Register"
hexmask.long.tbyte 0x14 12.--31. 0x10 "LWR_TARGET_RW,Forms bits [31:12] of the of the new address of the translated region"
hexmask.long.word 0x14 0.--11. 0x01 "LWR_TARGET_HW,Forms bits [11:0] of the start address of the new address of the translated region"
line.long 0x18 "IATU_UPPER_TARGET_ADDR_OFF_OUTBOUND_0,IATU Upper Target Address Register"
endif
wgroup.long 0x1010++0x07
line.long 0x00 "BAR0_MASK,Base Address 0 Mask Register"
hexmask.long 0x00 1.--31. 1. "MASK,Mask"
bitfld.long 0x00 0. "BAR_EN,Bar enable" "Disabled,Enabled"
line.long 0x04 "BAR1_MASK,Base Address 1 Mask Register"
hexmask.long 0x04 1.--31. 1. "MASK,Mask"
bitfld.long 0x04 0. "BAR_EN,Bar enable" "Disabled,Enabled"
if (((per.l(ad:0x1E00000+0x13C))&0x40)==0x40)
wgroup.long 0x1018++0x0F
line.long 0x00 "BAR2_MASK,Base Address 2 Mask Register"
hexmask.long 0x00 1.--31. 1. "MASK,Mask"
bitfld.long 0x00 0. "BAR_EN,Bar enable" "Disabled,Enabled"
line.long 0x04 "BAR3_MASK,Base Address 3 Mask Register"
hexmask.long 0x04 1.--31. 1. "MASK,Mask"
bitfld.long 0x04 0. "BAR_EN,Bar enable" "Disabled,Enabled"
line.long 0x08 "BAR4_MASK,Base Address 4 Mask Register"
hexmask.long 0x08 1.--31. 1. "MASK,Mask"
bitfld.long 0x08 0. "BAR_EN,Bar enable" "Disabled,Enabled"
line.long 0x0C "BAR5_MASK,Base Address 5 Mask Register"
hexmask.long 0x0C 1.--31. 1. "MASK,Mask"
bitfld.long 0x0C 0. "BAR_EN,Bar enable" "Disabled,Enabled"
wgroup.long 0x1030++0x03
line.long 0x00 "EXP_ROM_BAR_MASK_EP,Expansion ROM Base Address Mask Register"
hexmask.long 0x00 1.--31. 1. "MASK,Expansion ROM BAR Mask"
bitfld.long 0x00 0. "BAR_EN,Expansion ROM BAR enable" "Disabled,Enabled"
else
hgroup.long 0x1018++0x03
hide.long 0x00 "BAR2_MASK,Base Address 2 Mask Register"
hgroup.long 0x101C++0x03
hide.long 0x00 "BAR3_MASK,Base Address 3 Mask Register"
hgroup.long 0x1020++0x03
hide.long 0x00 "BAR4_MASK,Base Address 4 Mask Register"
hgroup.long 0x1024++0x03
hide.long 0x00 "BAR5_MASK,Base Address 5 Mask Register"
wgroup.long 0x1038++0x03
line.long 0x00 "EXP_ROM_BAR_MASK_RC,Expansion ROM Base Address Mask Register"
hexmask.long.tbyte 0x00 11.--31. 1. "MASK,Expansion ROM BAR Mask"
bitfld.long 0x00 0. "BAR_EN,Expansion ROM BAR enable" "Disabled,Enabled"
endif
tree.end
tree "PEX2_LUT Registers"
base ad:(0x3500000+0x80000)
group.long 0x20++0x07
line.long 0x00 "PEXLSR,PEX LUT Status Register"
eventfld.long 0x00 31. "LUTM,Lookup table miss" "Not missed,Missed"
eventfld.long 0x00 30. "MLUTM,Multiple lookup table miss" "Not missed,Missed"
hexmask.long.word 0x00 0.--15. 1. "CREQID,Captured REQID"
line.long 0x04 "PEXLCR,PEX LUT Control Register"
bitfld.long 0x04 31. "DPL,Default privilege level" "0,1"
bitfld.long 0x04 30. "DBMT,Default bypass memory translation" "0,1"
hexmask.long.word 0x04 0.--14. 1. "DICID,Default isolation context ID"
repeat 32. (increment 0x00 0x08)(increment 0. 1.)
group.long ($1+0x800)++0x07
line.long 0x00 "PEX_LUT_PEXL$2UDR,PEX LUT Entry $2 Upper Data Register"
hexmask.long.word 0x00 16.--31. 1. "REQID,The request ID of entry $2 of the PEX lookup table"
hexmask.long.word 0x00 0.--15. 1. "MASK,The mask field of entry $2 of the PEX lookup table"
line.long 0x04 "PEX_LUT_PEXL$2LDR,PEX LUT Entry $2 Lower Data Register"
bitfld.long 0x04 31. "EN,The enable field of entry $2 within the PEX lookup table" "Disabled,Enabled"
bitfld.long 0x04 30. "PL,The privilege level field of entry $2 within the PEX lookup table" "0,1"
bitfld.long 0x04 29. "BMT,Bypass memory translation" "0,1"
newline
hexmask.long.word 0x04 0.--14. 1. "ICID,Isolation context ID"
repeat.end
group.long 0x40014++0x03
line.long 0x00 "PEX_PF0_CONFIG,PEX PF0 Config Register"
bitfld.long 0x00 0. "CFG_READY,Config ready" "Not ready,Ready"
rgroup.long 0x40018++0x03
line.long 0x00 "PEX_PF0_INT_STAT,PEX PF 0 Interrupt Status Register"
bitfld.long 0x00 15. "INTM,Per PF dependent message interrupt is pending" "Not pending,Pending"
bitfld.long 0x00 14. "INTE,Per PF dependent error interrupt is pending" "Not pending,Pending"
group.long 0x40020++0x0B
line.long 0x00 "PEX_PF0_PME_MES_DR,PEX PF 0 PCIE PME and Message Detect Register"
eventfld.long 0x00 15. "PTO,Indicates that PME turn off was detected" "Not detected,Detected"
eventfld.long 0x00 13. "ENL23,Indicates that PCIe core entered L2/L3 ready state" "Not detected,Detected"
eventfld.long 0x00 12. "EXL23,Indicates that PCIe core exited L2/L3 ready state" "Not detected,Detected"
newline
eventfld.long 0x00 10. "HRD,Indicates a hot reset was detected" "Not detected,Detected"
eventfld.long 0x00 9. "LDD,Indicates a link down was detected" "Not detected,Detected"
eventfld.long 0x00 7. "LUD,Indicates a link up was detected" "Not detected,Detected"
line.long 0x04 "PEX_PF0_PME_MES_DISR,PEX PF 0 PCIE PME and Message Disable Register"
bitfld.long 0x04 15. "PTOD,PME turn off detect disabled" "No,Yes"
bitfld.long 0x04 13. "ENL23D,Entered L2/L3 ready state detect disabled" "No,Yes"
bitfld.long 0x04 12. "EXL23D,Exited L2/L3 ready state detect disable" "No,Yes"
newline
bitfld.long 0x04 10. "HRDD,Hot reset detect disable" "No,Yes"
bitfld.long 0x04 9. "LDDD,Link down detect disable" "No,Yes"
bitfld.long 0x04 7. "LUDD,Link up detect disable" "No,Yes"
line.long 0x08 "PEX_PF0_PME_MES_IER,PEX PF 0 PCIE PME And Message Interrupt Enable Register"
bitfld.long 0x08 15. "PTOIE,PME turn off interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 13. "ENL23IE,Entered L2/L3 ready state detect interrupt enabled" "Disabled,Enabled"
bitfld.long 0x08 12. "EXL23IE,Exited L2/L3 ready state detect interrupt enabled" "Disabled,Enabled"
newline
bitfld.long 0x08 10. "HRDIE,Hot reset detect interrupt enabled" "Disabled,Enabled"
bitfld.long 0x08 9. "LDDIE,Link down detect interrupt enabled" "Disabled,Enabled"
bitfld.long 0x08 7. "LUDIE,Link up detect interrupt enabled" "Disabled,Enabled"
if (((per.l(ad:0x1E00000+0x13C))&0x40)==0x00)
group.long 0x4002C++0x03
line.long 0x00 "PEX_PF0_MCR,PEX PF 0 PCIE Message Command Register"
bitfld.long 0x00 4. "INTX,Assert/de-assert intx command" "Not asserted,Asserted"
bitfld.long 0x00 2. "SPMES,Send PM_PME command" "Not sent,Sent"
bitfld.long 0x00 1. "EXL2S,Exit L2 state command" "Not generated,Generated"
newline
bitfld.long 0x00 0. "PTOMR,Generate PME turn off message" "Not generated,Generated"
else
group.long 0x4002C++0x03
line.long 0x00 "PEX_PF0_MCR,PEX PF 0 PCIE Message Command Register"
bitfld.long 0x00 4. "INTX,Assert/de-assert intx command" "Not asserted,Asserted"
bitfld.long 0x00 2. "SPMES,Send PM_PME command" "Not sent,Sent"
bitfld.long 0x00 1. "EXL2S,Exit L2 state command" "Not generated,Generated"
endif
group.long 0x40140++0x03
line.long 0x00 "PEX_PF0_RBP_ADDR_U,PEX PF 0 Route By Port Address Upper Register"
hexmask.long.word 0x00 16.--31. 1. "ADDR_U,Upper 16 bit of the PCIE slave device used for the outbound transactions"
group.long 0x40200++0x03
line.long 0x00 "PEX_PF0_ERR_DR,PEX PF 0 PCIE Error Detect Register"
eventfld.long 0x00 31. "ME,Indicates multiple errors of same type" "Not detected,Detected"
eventfld.long 0x00 23. "PCT,Indicates completion timeout" "Not detected,Detected"
eventfld.long 0x00 21. "PCAC,Completer abort was detected" "Not detected,Detected"
newline
eventfld.long 0x00 19. "CDNSC,Completion with data not successful was detected" "Not detected,Detected"
eventfld.long 0x00 2. "UREP,Indicates an unsupported request completion was detected" "Not detected,Detected"
group.long 0x40208++0x03
line.long 0x00 "PEX_PF0_ERR_EN,PEX PF 0 PCIE Error Interrupt Enable Register"
bitfld.long 0x00 23. "PCTIE,Completion timeout interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 21. "PCACIE,Completer abort interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 19. "CDNSCIE,Completion with data not successful interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "UREPIE,Unsupported request in EP mode interrupt enable" "Disabled,Enabled"
group.long 0x40210++0x03
line.long 0x00 "PEX_PF0_ERR_DISR,PEX PF 0 PCIE Error Disable Register"
eventfld.long 0x00 31. "MED,Multiple errors of same type detection disable" "No,Yes"
newline
bitfld.long 0x00 23. "PCTD,Completion detection disable" "No,Yes"
bitfld.long 0x00 21. "PCACD,Completer abort detection disable" "No,Yes"
bitfld.long 0x00 19. "CDNSCD,Completion with data not successful detection disable" "No,Yes"
newline
bitfld.long 0x00 2. "UREPD,Unsupported request in EP mode detection disable" "No,Yes"
group.long 0x407FC++0x03
line.long 0x00 "PEX_PF0_DBG,PEX PF0 Debug Register"
bitfld.long 0x00 31. "WE,Write enable" "Disabled,Enabled"
bitfld.long 0x00 30. "SR,Soft reset" "No reset,Reset"
rbitfld.long 0x00 0.--5. "LTSSM,Link training status state machine (LTSSM) status" "DETECT_QUIET,DETECT_ACTIVE,POLL_ACTIVE,POLL_COMPLIANCE,POLL_CONFIG,PRE_DETECT_QUIET,DETECT_WAIT,CFG_LINKWD_START,CFG_LINKWD_ACEPT,CFG_LANENUM_WAIT,CFG_LANENUM_ACEPT,CFG_COMPLETE,CFG_IDLE,RCVRY_LOCK,RCVRY_SPEED,RCVRY_RCVRCFG,RCVRY_IDLE,L0,L0S,L123_SEND_EIDLE,L1_IDLE,L2_IDLE,L2_WAKE,DISABLED_ENTRY,DISABLED_IDLE,DISABLED,LPBK_ENTRY,LPBK_ACTIVE,LPBK_EXIT,LPBK_EXIT_TIMEOUT,HOT_RESET_ENTRY,HOT_RESET,RCVRY_EQ0,RCVRY_EQ1,RCVRY_EQ2,RCVRY_EQ3,?..."
tree.end
tree.end
tree.end
tree "PMU (Power Management Unit)"
base ad:0x1E30000
rgroup.long 0x40++0x03
line.long 0x00 "TWAITSR0,Core Wait Status Register"
bitfld.long 0x00 1. "T_WAITING1,Core 1 wait status" "No waiting,Waiting"
bitfld.long 0x00 0. "T_WAITING0,Core 0 wait status" "No waiting,Waiting"
group.long 0x1B0++0x03
line.long 0x00 "TTBHLTCR0,Core Time Base Halt Control Register 0"
bitfld.long 0x00 1. "TTBHLT1,Core 1 timebase behavior during core halted" "Stopped,Active"
bitfld.long 0x00 0. "TTBHLT0,Core 0 timebase behavior during core halted" "Stopped,Active"
group.long 0x824++0x03
line.long 0x00 "PCPH20R_SET/CLR,Physical Core PH20 Set/Clear Control Register"
setclrfld.long 0x00 1. 0x00 1. 0x04 1. "PC_PH20_RQ1,Physical core PH20 request 1" "Not requested,Requested"
setclrfld.long 0x00 0. 0x00 0. 0x04 0. "PC_PH20_RQ0,Physical core PH20 request 0" "Not requested,Requested"
group.long 0x840++0x03
line.long 0x00 "PCPH30SR,Physical Core PH30 Status Register"
bitfld.long 0x00 1. "PC1,Physical core PH30 status 1" "Not in PH30,In PH30"
bitfld.long 0x00 0. "PC0,Physical core PH30 status 0" "Not in PH30,In PH30"
group.long 0x8A0++0x03
line.long 0x00 "PCTBENR,Physical Core Time Base Enable Register"
bitfld.long 0x00 1. "PCTBEN1,Core 1 timebase enable" "Disabled,Enabled"
bitfld.long 0x00 0. "PCTBEN0,Core 0 timebase enable" "Disabled,Enabled"
group.long 0x8A8++0x03
line.long 0x00 "TBCLKDIVR,Time Base Clock Divider Register"
bitfld.long 0x00 0.--4. "TBCLKDIV,Timebase clock divider configuration" "1/16,,1/8,,,,1/24,,1/32,?..."
group.long 0x1000++0x03
line.long 0x00 "CLPCL10SR,Cluster PCL10 (Stop) Status Register"
bitfld.long 0x00 0. "CL0,Cluster 0 PCL10 status" "Not in PCL10,In PCL10"
group.long 0x100C++0x03
line.long 0x00 "CLPCL10PSR,Cluster PCL10 (Stop) Previous Status Register"
eventfld.long 0x00 0. "CL_P_PCL10_0,Cluster PCL10 previous status" "Not in PCL10,In PCL10"
group.long 0x4000++0x03
line.long 0x00 "POWMGTCSR,Power Management Control and Status Register"
bitfld.long 0x00 31. "LYNX_PD,Lynx and protocol converter powerdown control" "Not powerdown,Powerdown"
bitfld.long 0x00 20. "LPM20_RQ,LPM20 state request" "Not requested,Requested"
bitfld.long 0x00 17. "LPM35_RQ,LPM35 state request" "Not requested,Requested"
bitfld.long 0x00 16. "LPM40_RQ,LPM40 state request" "Not requested,Requested"
newline
rbitfld.long 0x00 9. "LPM20_ST,Attempt to reach LPM20 state status" "Not attempted,Attempted"
bitfld.long 0x00 8. "P_LPM20_ST,Previous LPM20 status" "Not in LPM20,In LPM20"
rbitfld.long 0x00 2. "LPM35_ST,Attempt to reach LPM35 state status" "Not attempted,Attempted"
rbitfld.long 0x00 1. "LPM40_ST,Attempt to reach LPM40 state status" "Not attempted,Attempted"
group.long 0x4040++0x17
line.long 0x00 "IPPDEXPCR0,IP Powerdown Exception Control Register 0"
bitfld.long 0x00 22. "CAAM,CAAM powerdown exception" "Powerdown,Powerup"
bitfld.long 0x00 16. "SATA,SATA powerdown exception" "Powerdown,Powerup"
bitfld.long 0x00 13. "USB2,USB2 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x00 12. "USB1,USB1 powerdown exception" "Powerdown,Powerup"
newline
bitfld.long 0x00 11. "EDMA,eDMA powerdown exception" "Powerdown,Powerup"
bitfld.long 0x00 10. "ESDHC2,eSDHC2 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x00 8. "QDMA,qDMA powerdown exception" "Powerdown,Powerup"
bitfld.long 0x00 2. "ESDHC1,eSDHC1 powerdown exception" "Powerdown,Powerup"
line.long 0x04 "IPPDEXPCR1,IP Powerdown Exception Control Register 1"
bitfld.long 0x04 24. "TSN,TSN powerdown exception" "Powerdown,Powerup"
bitfld.long 0x04 5. "TSN_MAC6,TSN_MAC6 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x04 4. "TSN_MAC5,TSN_MAC5 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x04 3. "TSN_MAC4,TSN_MAC4 powerdown exception" "Powerdown,Powerup"
newline
bitfld.long 0x04 2. "TSN_MAC3,TSN_MAC3 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x04 1. "TSN_MAC2,TSN_MAC2 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x04 0. "TSN_MAC1,TSN_MAC1 powerdown exception" "Powerdown,Powerup"
line.long 0x08 "IPPDEXPCR2,IP Powerdown Exception Control Register 2"
bitfld.long 0x08 1. "PEX2,PEX2 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x08 0. "PEX1,PEX1 powerdown exception" "Powerdown,Powerup"
line.long 0x0C "IPPDEXPCR3,IP Powerdown Exception Control Register 3"
bitfld.long 0x0C 10. "I2C78,I2C78 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x0C 9. "I2C456,I2C456 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x0C 8. "I2C3,I2C3 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x0C 5. "DSPI,DSPI1-3 powerdown exception" "Powerdown,Powerup"
newline
bitfld.long 0x0C 4. "FSPI,FlexSPI powerdown exception" "Powerdown,Powerup"
bitfld.long 0x0C 3. "LPUART,LPUART1-6 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x0C 2. "DUART,DUART powerdown exception" "Powerdown,Powerup"
bitfld.long 0x0C 1. "I2C2,I2C2 powerdown exception" "Powerdown,Powerup"
newline
bitfld.long 0x0C 0. "I2C1,I2C1 powerdown exception" "Powerdown,Powerup"
line.long 0x10 "IPPDEXPCR4,IP Powerdown Exception Control Register 4"
bitfld.long 0x10 19. "SAI,SAI1-6 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x10 17. "CAN,CAN1-2 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x10 15. "FTMR5678,FlexTimer5-8 powerdown exception" "Powerdown,Powerup"
bitfld.long 0x10 14. "FTMR1234,FlexTimer1-4 powerdown exception" "Powerdown,Powerup"
newline
bitfld.long 0x10 13. "TMU,TMU powerdown exception" "Powerdown,Powerup"
bitfld.long 0x10 12. "OCRAM,OCRAM and TZPC powerdown exception" "Powerdown,Powerup"
bitfld.long 0x10 10. "DBG,DBG IP powerdown exception" "Powerdown,Powerup"
bitfld.long 0x10 9. "GPIO,GPIO1-3 powerdown exception" "Powerdown,Powerup"
newline
bitfld.long 0x10 0. "DDR,DDR powerdown exception" "Powerdown,Powerup"
line.long 0x14 "IPPDEXPCR5,IP Powerdown Exception Control Register 5"
bitfld.long 0x14 14. "DISP,Display controller powerdown exception" "Powerdown,Powerup"
bitfld.long 0x14 12. "GPU,GPU powerdown exception" "Powerdown,Powerup"
bitfld.long 0x14 0. "ENETC,ENETC powerdown exception" "Powerdown,Powerup"
tree.end
tree "QDMA (Queue Direct Memory Access Controller)"
tree "Common Registers"
base ad:0x08380000
group.long 0x00++0x03
line.long 0x00 "DMR,DMA Mode Register"
bitfld.long 0x00 31. "SR,Soft reset" "No effect,Reset"
bitfld.long 0x00 30. "DQD,Dequeue disable" "No,Yes"
bitfld.long 0x00 29. "GBT,Global bandwidth throttle enable" "Disabled,Enabled"
bitfld.long 0x00 21. "SD,Snoop disable for memory data access" "No,Yes"
newline
bitfld.long 0x00 20. "DSD,Snoop disable for memory descriptor access" "No,Yes"
bitfld.long 0x00 16. "TCD,Throttle control disable" "No,Yes"
bitfld.long 0x00 8.--10. "DQOS,QoS for memory descriptor access" "Lowest,1,2,3,4,5,6,Highest"
rgroup.long 0x04++0x03
line.long 0x00 "DSR_P,DMA Status Register"
bitfld.long 0x00 31. "DB,DMA busy" "Idle,Busy"
group.long 0x40++0x03
line.long 0x00 "DSIDFR,DMA Stream ID Flush Register"
bitfld.long 0x00 30.--31. "FM,Flush mode" "Disabled,Stream ID,?..."
hexmask.long.byte 0x00 0.--7. 1. "STREAM_ID,Stream ID"
rgroup.long 0x10004++0x03
line.long 0x00 "DSR_M,DMA Status Register"
bitfld.long 0x00 31. "DB,DMA busy" "Idle,Busy"
group.long 0x10040++0x03
line.long 0x00 "DGBTR,DMA Global Bandwidth Throttle Register"
bitfld.long 0x00 16.--19. "TBC,Token bucket capacity" ",,,,,,,,256 bytes,512 bytes,1K bytes,2K bytes,4K bytes,?..."
bitfld.long 0x00 8.--10. "MULT,The token addition rate multiplier" "1,2,4,8,16,32,64,128"
bitfld.long 0x00 0.--2. "SCALE,The token addition rate scaler" "1,2,4,8,16,32,64,128"
rgroup.long 0x10BF8++0x07
line.long 0x00 "IPBRR0,IP Block Revision Register 0"
hexmask.long.word 0x00 16.--31. 1. "IP_ID,IP block ID"
hexmask.long.byte 0x00 8.--15. 1. "IP_MJ,Major revision"
hexmask.long.byte 0x00 0.--7. 1. "IP_MN,Minor revision"
line.long 0x04 "IPBRR1,IP Block Revision Register 1"
hexmask.long.byte 0x04 16.--23. 1. "IP_INT,IP block integration options"
hexmask.long.byte 0x04 8.--15. 1. "IP_MNT,IP block maintenance version"
hexmask.long.byte 0x04 0.--7. 1. "IP_CFG,IP block configuration options"
group.long 0x10E00++0x07
line.long 0x00 "DEIER,DMA Error Interrupt Enable Register"
bitfld.long 0x00 31. "MEIE,Multiple error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 29. "RTEIE,Read transaction error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 28. "WTEIE,Write transaction error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 27. "CDEIE,Command descriptor error interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 26. "SDEIE,Source descriptor error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 25. "DDEIE,Destination descriptor error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 24. "EREIE,Enqueue rejection error interrupt enable" "Disabled,Enabled"
line.long 0x04 "DEDR,DMA Error Detect Register"
eventfld.long 0x04 31. "ME,Multiple errors of the same type" "Not detected,Detected"
eventfld.long 0x04 29. "RTE,Read transaction error" "No error,Error"
eventfld.long 0x04 28. "WTE,Write transaction error" "No error,Error"
eventfld.long 0x04 27. "CDE,Command descriptor error" "No error,Error"
newline
eventfld.long 0x04 26. "SDE,Source descriptor error" "No error,Error"
eventfld.long 0x04 25. "DDE,Destination descriptor error" "No error,Error"
eventfld.long 0x04 24. "ERE,Enqueue rejection error" "No error,Error"
rgroup.long 0x10E10++0x0F
line.long 0x00 "DECCDW0R,DMA Error Capture Frame Descriptor Word 0 Register"
line.long 0x04 "DECCDW1R,DMA Error Capture Frame Descriptor Word 1 Register"
line.long 0x08 "DECCDW2R,DMA Error Capture Frame Descriptor Word 2 Register"
line.long 0x0C "DECCDW3R,DMA Error Capture Frame Descriptor Word 3 Register"
rgroup.long 0x10E30++0x07
line.long 0x00 "DECCQIDR,DMA Error Capture Command Queue ID Register"
bitfld.long 0x00 0.--4. "CQID,Command queue ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "DECBR,DMA Error Capture Byte Count Register"
group.long 0x20A00++0x03
line.long 0x00 "CQMR,Command Queue Mode Register"
bitfld.long 0x00 28.--29. "QOS,QoS used for memory access" "0,2,4,6"
hexmask.long.word 0x00 0.--9. 1. "AG_DLA,Arbitration group deadlock avoidance"
group.long 0x20A08++0x0F
line.long 0x00 "CQDSCR1,Command Queue Dequeue Scheduler Configuration Register 1"
bitfld.long 0x00 28.--30. "AGQ0,Arbitration group number for command queue 0" "0,?..."
bitfld.long 0x00 24.--26. "AGQ1,Arbitration group number for command queue 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20.--22. "AGQ2,Arbitration group number for command queue 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 16.--18. "AGQ3,Arbitration group number for command queue 3" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 12.--14. "AGQ4,Arbitration group number for command queue 4" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 8.--10. "AGQ5,Arbitration group number for command queue 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4.--6. "AGQ6,Arbitration group number for command queue 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--2. "AGQ7,Arbitration group number for command queue 7" "0,1,2,3,4,5,6,7"
line.long 0x04 "CQDSCR2,Command Queue Dequeue Scheduler Configuration Register 2"
bitfld.long 0x04 28.--30. "AWQ0,Arbitration weight number for command queue 0" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 24.--26. "AWQ1,Arbitration weight number for command queue 1" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 20.--22. "AWQ2,Arbitration weight number for command queue 2" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 16.--18. "AWQ3,Arbitration weight number for command queue 3" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 12.--14. "AWQ4,Arbitration weight number for command queue 4" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 8.--10. "AWQ5,Arbitration weight number for command queue 5" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 4.--6. "AWQ6,Arbitration weight number for command queue 6" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 0.--2. "AWQ7,Arbitration weight number for command queue 7" "0,1,2,3,4,5,6,7"
line.long 0x08 "CQIER,Command Queue Interrupt Enable Register"
bitfld.long 0x08 31. "MEIE,Multiple error interrupt enable" "Disabled,Enabled"
bitfld.long 0x08 0. "TEIE,Transaction error interrupt enable" "Disabled,Enabled"
line.long 0x0C "CQEDR,Command Queue Error Detect Register"
eventfld.long 0x0C 31. "ME,Multiple error" "No error,Error"
eventfld.long 0x0C 0. "TE,Transaction error" "No error,Error"
rgroup.long 0x20A18++0x07
line.long 0x00 "CQECEAR,Command Queue Error Capture Extended Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "ADDR,Address"
line.long 0x04 "CQECAR,Command Queue Error Capture Address Register"
group.long 0x20A20++0x03
line.long 0x00 "SQCCMR,Status Queue Critical Congestion Management Register"
bitfld.long 0x00 16.--21. "ENTER_WM,Critical congestion enter watermark level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
repeat 4. (increment 0x20A80 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "CQ$2SIDR,Command Queue Block $2 Stream ID Register"
eventfld.long 0x00 31. "V,Valid" "Not valid,Valid"
hexmask.long.byte 0x00 0.--7. 0x01 "STREAM_ID,Stream ID for data and descriptor accesses when using the command queues"
repeat.end
tree.end
tree "Block 0"
base ad:0x83A0000
repeat 8. (increment 0xC0 0x100)(increment 0. 1.)
group.long $1++0x03 "Block 0 Queue $2 Registers"
line.long 0x00 "B0CQ$2MR,Block 0 Command Queue $2 Mode Register"
bitfld.long 0x00 31. "EN,Command queue enable" "Disabled,Enabled"
bitfld.long 0x00 30. "EI,Enqueue pointer increment" "Not incremented,Incremented"
bitfld.long 0x00 20.--23. "CD_THLD,Interrupt threshold" "16,32,64,128,256,512,1024,2048,4096,8192,?..."
bitfld.long 0x00 16.--19. "CQ_SIZE,Circular descriptor queue size" "64,128,256,512,1024,2048,4096,8192,16384,?..."
rgroup.long ($1+0x04)++0x03
line.long 0x00 "B0CQ$2SR,Block 0 Command Queue $2 Status Register"
bitfld.long 0x00 17. "QE,Queue empty" "Not empty,Empty"
bitfld.long 0x00 16. "QF,Queue full" "Not full,Full"
bitfld.long 0x00 0. "XOFF,Command queue congestion management enter" "Not entered,Entered"
group.long ($1+0x08)++0x0F
line.long 0x00 "B0CQ$2EDPAR,Block 0 Command Queue $2 Extended Dequeue Pointer Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "ECQDPA,Extended command queue dequeue pointer address bits"
line.long 0x04 "B0CQ$2DPAR,Block 0 Command Queue $2 Dequeue Pointer Address Register"
hexmask.long 0x04 4.--31. 0x10 "CQDPA,Command queue dequeue pointer address"
line.long 0x08 "B0CQ$2EEPAR,Block 0 Command Queue $2 Extended Enqueue Pointer Address Register"
hexmask.long.byte 0x08 0.--7. 0x01 "ECQEPA,Extended command queue enqueue pointer address bits"
line.long 0x0C "B0CQ$2EPAR,Block 0 Command Queue $2 Enqueue Pointer Address Register"
hexmask.long 0x0C 4.--31. 0x10 "CQEPA,Command queue enqueue pointer address"
repeat.end
group.long 0xE0++0x07 "Block 0 Registers"
line.long 0x00 "B0CQIER,Block 0 Command Queue Interrupt Enable Register"
bitfld.long 0x00 31. "CQ0TIE,Command queue 0 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CQ1TIE,Command queue 1 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 29. "CQ2TIE,Command queue 2 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 28. "CQ3TIE,Command queue 3 threshold interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "CQ4TIE,Command queue 4 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 26. "CQ5TIE,Command queue 5 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 25. "CQ6TIE,Command queue 6 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 24. "CQ7TIE,Command queue 7 threshold interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "SQPEIE,Status queue programming error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 15. "SQTIE,Status queue threshold interrupt enable" "Disabled,Enabled"
line.long 0x04 "B0CQIDR,Block 0 Command Queue Interrupt Detect Register"
eventfld.long 0x04 31. "CQ0T,Command queue 0 threshold" "Not crossed,Crossed"
eventfld.long 0x04 30. "CQ1T,Command queue 1 threshold" "Not crossed,Crossed"
eventfld.long 0x04 29. "CQ2T,Command queue 2 threshold" "Not crossed,Crossed"
eventfld.long 0x04 28. "CQ3T,Command queue 3 threshold" "Not crossed,Crossed"
newline
eventfld.long 0x04 27. "CQ4T,Command queue 4 threshold" "Not crossed,Crossed"
eventfld.long 0x04 26. "CQ5T,Command queue 5 threshold" "Not crossed,Crossed"
eventfld.long 0x04 25. "CQ6T,Command queue 6 threshold" "Not crossed,Crossed"
eventfld.long 0x04 24. "CQ7T,Command queue 7 threshold" "Not crossed,Crossed"
newline
eventfld.long 0x04 23. "SQPE,Status queue programming error" "No error,Error"
eventfld.long 0x04 15. "SQT,Status notification queue threshold" "Not reached,Reached"
group.long 0x800++0x03
line.long 0x00 "B0SQMR,Block 0 Status Queue Mode Register"
bitfld.long 0x00 31. "EN,Status queue enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DI,Dequeue pointer increment" "Not incremented,Incremented"
bitfld.long 0x00 16.--19. "CQ_SIZE,Circular descriptor queue size" "64,128,256,512,1024,2048,4096,8192,16384,?..."
rgroup.long 0x804++0x03
line.long 0x00 "B0SQSR,Block 0 Status Queue Status Register"
bitfld.long 0x00 17. "QE,Queue empty" "Not empty,Empty"
bitfld.long 0x00 16. "QF,Queue full" "Not full,Full"
group.long 0x808++0x0F
line.long 0x00 "B0SQEDPAR,Block 0 Status Queue Extended Dequeue Pointer Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "SQDPA,Upper status queue dequeue pointer address bits"
line.long 0x04 "B0SQDPAR,Block 0 Status Queue Dequeue Pointer Address Register"
hexmask.long 0x04 4.--31. 0x10 "SQDPA,Status queue dequeue pointer address"
line.long 0x08 "B0SQEEPAR,Block 0 Status Queue Extended Enqueue Pointer Address Register"
hexmask.long.byte 0x08 0.--7. 0x01 "SQEPA,Extended status queue dequeue pointer address bits"
line.long 0x0C "B0SQEPAR,Block 0 Status Queue Enqueue Pointer Address Register"
hexmask.long 0x0C 4.--31. 0x10 "SQEPA,Status queue enqueue pointer address"
group.long 0x828++0x03
line.long 0x00 "B0SQICR,Block 0 Status Queue Interrupt Coalescing Register"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "ICST,Interrupt coalescing status notification threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,?..."
hexmask.long.word 0x00 0.--15. 1. "ICTT,Interrupt coalescing timer threshold"
tree.end
tree "Block 1"
base ad:0x83B0000
repeat 8. (increment 0xC0 0x100)(increment 0. 1.)
group.long $1++0x03 "Block 1 Queue $2 Registers"
line.long 0x00 "B1CQ$2MR,Block 1 Command Queue $2 Mode Register"
bitfld.long 0x00 31. "EN,Command queue enable" "Disabled,Enabled"
bitfld.long 0x00 30. "EI,Enqueue pointer increment" "Not incremented,Incremented"
bitfld.long 0x00 20.--23. "CD_THLD,Interrupt threshold" "16,32,64,128,256,512,1024,2048,4096,8192,?..."
bitfld.long 0x00 16.--19. "CQ_SIZE,Circular descriptor queue size" "64,128,256,512,1024,2048,4096,8192,16384,?..."
rgroup.long ($1+0x04)++0x03
line.long 0x00 "B1CQ$2SR,Block 1 Command Queue $2 Status Register"
bitfld.long 0x00 17. "QE,Queue empty" "Not empty,Empty"
bitfld.long 0x00 16. "QF,Queue full" "Not full,Full"
bitfld.long 0x00 0. "XOFF,Command queue congestion management enter" "Not entered,Entered"
group.long ($1+0x08)++0x0F
line.long 0x00 "B1CQ$2EDPAR,Block 1 Command Queue $2 Extended Dequeue Pointer Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "ECQDPA,Extended command queue dequeue pointer address bits"
line.long 0x04 "B1CQ$2DPAR,Block 1 Command Queue $2 Dequeue Pointer Address Register"
hexmask.long 0x04 4.--31. 0x10 "CQDPA,Command queue dequeue pointer address"
line.long 0x08 "B1CQ$2EEPAR,Block 1 Command Queue $2 Extended Enqueue Pointer Address Register"
hexmask.long.byte 0x08 0.--7. 0x01 "ECQEPA,Extended command queue enqueue pointer address bits"
line.long 0x0C "B1CQ$2EPAR,Block 1 Command Queue $2 Enqueue Pointer Address Register"
hexmask.long 0x0C 4.--31. 0x10 "CQEPA,Command queue enqueue pointer address"
repeat.end
group.long 0xE0++0x07 "Block 1 Registers"
line.long 0x00 "B1CQIER,Block 1 Command Queue Interrupt Enable Register"
bitfld.long 0x00 31. "CQ0TIE,Command queue 0 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CQ1TIE,Command queue 1 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 29. "CQ2TIE,Command queue 2 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 28. "CQ3TIE,Command queue 3 threshold interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "CQ4TIE,Command queue 4 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 26. "CQ5TIE,Command queue 5 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 25. "CQ6TIE,Command queue 6 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 24. "CQ7TIE,Command queue 7 threshold interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "SQPEIE,Status queue programming error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 15. "SQTIE,Status queue threshold interrupt enable" "Disabled,Enabled"
line.long 0x04 "B1CQIDR,Block 1 Command Queue Interrupt Detect Register"
eventfld.long 0x04 31. "CQ0T,Command queue 0 threshold" "Not crossed,Crossed"
eventfld.long 0x04 30. "CQ1T,Command queue 1 threshold" "Not crossed,Crossed"
eventfld.long 0x04 29. "CQ2T,Command queue 2 threshold" "Not crossed,Crossed"
eventfld.long 0x04 28. "CQ3T,Command queue 3 threshold" "Not crossed,Crossed"
newline
eventfld.long 0x04 27. "CQ4T,Command queue 4 threshold" "Not crossed,Crossed"
eventfld.long 0x04 26. "CQ5T,Command queue 5 threshold" "Not crossed,Crossed"
eventfld.long 0x04 25. "CQ6T,Command queue 6 threshold" "Not crossed,Crossed"
eventfld.long 0x04 24. "CQ7T,Command queue 7 threshold" "Not crossed,Crossed"
newline
eventfld.long 0x04 23. "SQPE,Status queue programming error" "No error,Error"
eventfld.long 0x04 15. "SQT,Status notification queue threshold" "Not reached,Reached"
group.long 0x800++0x03
line.long 0x00 "B1SQMR,Block 1 Status Queue Mode Register"
bitfld.long 0x00 31. "EN,Status queue enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DI,Dequeue pointer increment" "Not incremented,Incremented"
bitfld.long 0x00 16.--19. "CQ_SIZE,Circular descriptor queue size" "64,128,256,512,1024,2048,4096,8192,16384,?..."
rgroup.long 0x804++0x03
line.long 0x00 "B1SQSR,Block 1 Status Queue Status Register"
bitfld.long 0x00 17. "QE,Queue empty" "Not empty,Empty"
bitfld.long 0x00 16. "QF,Queue full" "Not full,Full"
group.long 0x808++0x0F
line.long 0x00 "B1SQEDPAR,Block 1 Status Queue Extended Dequeue Pointer Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "SQDPA,Upper status queue dequeue pointer address bits"
line.long 0x04 "B1SQDPAR,Block 1 Status Queue Dequeue Pointer Address Register"
hexmask.long 0x04 4.--31. 0x10 "SQDPA,Status queue dequeue pointer address"
line.long 0x08 "B1SQEEPAR,Block 1 Status Queue Extended Enqueue Pointer Address Register"
hexmask.long.byte 0x08 0.--7. 0x01 "SQEPA,Extended status queue dequeue pointer address bits"
line.long 0x0C "B1SQEPAR,Block 1 Status Queue Enqueue Pointer Address Register"
hexmask.long 0x0C 4.--31. 0x10 "SQEPA,Status queue enqueue pointer address"
group.long 0x828++0x03
line.long 0x00 "B1SQICR,Block 1 Status Queue Interrupt Coalescing Register"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "ICST,Interrupt coalescing status notification threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,?..."
hexmask.long.word 0x00 0.--15. 1. "ICTT,Interrupt coalescing timer threshold"
tree.end
tree "Block 2"
base ad:0x83C0000
repeat 8. (increment 0xC0 0x100)(increment 0. 1.)
group.long $1++0x03 "Block 2 Queue $2 Registers"
line.long 0x00 "B2CQ$2MR,Block 2 Command Queue $2 Mode Register"
bitfld.long 0x00 31. "EN,Command queue enable" "Disabled,Enabled"
bitfld.long 0x00 30. "EI,Enqueue pointer increment" "Not incremented,Incremented"
bitfld.long 0x00 20.--23. "CD_THLD,Interrupt threshold" "16,32,64,128,256,512,1024,2048,4096,8192,?..."
bitfld.long 0x00 16.--19. "CQ_SIZE,Circular descriptor queue size" "64,128,256,512,1024,2048,4096,8192,16384,?..."
rgroup.long ($1+0x04)++0x03
line.long 0x00 "B2CQ$2SR,Block 2 Command Queue $2 Status Register"
bitfld.long 0x00 17. "QE,Queue empty" "Not empty,Empty"
bitfld.long 0x00 16. "QF,Queue full" "Not full,Full"
bitfld.long 0x00 0. "XOFF,Command queue congestion management enter" "Not entered,Entered"
group.long ($1+0x08)++0x0F
line.long 0x00 "B2CQ$2EDPAR,Block 2 Command Queue $2 Extended Dequeue Pointer Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "ECQDPA,Extended command queue dequeue pointer address bits"
line.long 0x04 "B2CQ$2DPAR,Block 2 Command Queue $2 Dequeue Pointer Address Register"
hexmask.long 0x04 4.--31. 0x10 "CQDPA,Command queue dequeue pointer address"
line.long 0x08 "B2CQ$2EEPAR,Block 2 Command Queue $2 Extended Enqueue Pointer Address Register"
hexmask.long.byte 0x08 0.--7. 0x01 "ECQEPA,Extended command queue enqueue pointer address bits"
line.long 0x0C "B2CQ$2EPAR,Block 2 Command Queue $2 Enqueue Pointer Address Register"
hexmask.long 0x0C 4.--31. 0x10 "CQEPA,Command queue enqueue pointer address"
repeat.end
group.long 0xE0++0x07 "Block 2 Registers"
line.long 0x00 "B2CQIER,Block 2 Command Queue Interrupt Enable Register"
bitfld.long 0x00 31. "CQ0TIE,Command queue 0 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CQ1TIE,Command queue 1 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 29. "CQ2TIE,Command queue 2 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 28. "CQ3TIE,Command queue 3 threshold interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "CQ4TIE,Command queue 4 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 26. "CQ5TIE,Command queue 5 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 25. "CQ6TIE,Command queue 6 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 24. "CQ7TIE,Command queue 7 threshold interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "SQPEIE,Status queue programming error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 15. "SQTIE,Status queue threshold interrupt enable" "Disabled,Enabled"
line.long 0x04 "B2CQIDR,Block 2 Command Queue Interrupt Detect Register"
eventfld.long 0x04 31. "CQ0T,Command queue 0 threshold" "Not crossed,Crossed"
eventfld.long 0x04 30. "CQ1T,Command queue 1 threshold" "Not crossed,Crossed"
eventfld.long 0x04 29. "CQ2T,Command queue 2 threshold" "Not crossed,Crossed"
eventfld.long 0x04 28. "CQ3T,Command queue 3 threshold" "Not crossed,Crossed"
newline
eventfld.long 0x04 27. "CQ4T,Command queue 4 threshold" "Not crossed,Crossed"
eventfld.long 0x04 26. "CQ5T,Command queue 5 threshold" "Not crossed,Crossed"
eventfld.long 0x04 25. "CQ6T,Command queue 6 threshold" "Not crossed,Crossed"
eventfld.long 0x04 24. "CQ7T,Command queue 7 threshold" "Not crossed,Crossed"
newline
eventfld.long 0x04 23. "SQPE,Status queue programming error" "No error,Error"
eventfld.long 0x04 15. "SQT,Status notification queue threshold" "Not reached,Reached"
group.long 0x800++0x03
line.long 0x00 "B2SQMR,Block 2 Status Queue Mode Register"
bitfld.long 0x00 31. "EN,Status queue enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DI,Dequeue pointer increment" "Not incremented,Incremented"
bitfld.long 0x00 16.--19. "CQ_SIZE,Circular descriptor queue size" "64,128,256,512,1024,2048,4096,8192,16384,?..."
rgroup.long 0x804++0x03
line.long 0x00 "B2SQSR,Block 2 Status Queue Status Register"
bitfld.long 0x00 17. "QE,Queue empty" "Not empty,Empty"
bitfld.long 0x00 16. "QF,Queue full" "Not full,Full"
group.long 0x808++0x0F
line.long 0x00 "B2SQEDPAR,Block 2 Status Queue Extended Dequeue Pointer Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "SQDPA,Upper status queue dequeue pointer address bits"
line.long 0x04 "B2SQDPAR,Block 2 Status Queue Dequeue Pointer Address Register"
hexmask.long 0x04 4.--31. 0x10 "SQDPA,Status queue dequeue pointer address"
line.long 0x08 "B2SQEEPAR,Block 2 Status Queue Extended Enqueue Pointer Address Register"
hexmask.long.byte 0x08 0.--7. 0x01 "SQEPA,Extended status queue dequeue pointer address bits"
line.long 0x0C "B2SQEPAR,Block 2 Status Queue Enqueue Pointer Address Register"
hexmask.long 0x0C 4.--31. 0x10 "SQEPA,Status queue enqueue pointer address"
group.long 0x828++0x03
line.long 0x00 "B2SQICR,Block 2 Status Queue Interrupt Coalescing Register"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "ICST,Interrupt coalescing status notification threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,?..."
hexmask.long.word 0x00 0.--15. 1. "ICTT,Interrupt coalescing timer threshold"
tree.end
tree "Block 3"
base ad:0x83D0000
repeat 8. (increment 0xC0 0x100)(increment 0. 1.)
group.long $1++0x03 "Block 3 Queue $2 Registers"
line.long 0x00 "B3CQ$2MR,Block 3 Command Queue $2 Mode Register"
bitfld.long 0x00 31. "EN,Command queue enable" "Disabled,Enabled"
bitfld.long 0x00 30. "EI,Enqueue pointer increment" "Not incremented,Incremented"
bitfld.long 0x00 20.--23. "CD_THLD,Interrupt threshold" "16,32,64,128,256,512,1024,2048,4096,8192,?..."
bitfld.long 0x00 16.--19. "CQ_SIZE,Circular descriptor queue size" "64,128,256,512,1024,2048,4096,8192,16384,?..."
rgroup.long ($1+0x04)++0x03
line.long 0x00 "B3CQ$2SR,Block 3 Command Queue $2 Status Register"
bitfld.long 0x00 17. "QE,Queue empty" "Not empty,Empty"
bitfld.long 0x00 16. "QF,Queue full" "Not full,Full"
bitfld.long 0x00 0. "XOFF,Command queue congestion management enter" "Not entered,Entered"
group.long ($1+0x08)++0x0F
line.long 0x00 "B3CQ$2EDPAR,Block 3 Command Queue $2 Extended Dequeue Pointer Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "ECQDPA,Extended command queue dequeue pointer address bits"
line.long 0x04 "B3CQ$2DPAR,Block 3 Command Queue $2 Dequeue Pointer Address Register"
hexmask.long 0x04 4.--31. 0x10 "CQDPA,Command queue dequeue pointer address"
line.long 0x08 "B3CQ$2EEPAR,Block 3 Command Queue $2 Extended Enqueue Pointer Address Register"
hexmask.long.byte 0x08 0.--7. 0x01 "ECQEPA,Extended command queue enqueue pointer address bits"
line.long 0x0C "B3CQ$2EPAR,Block 3 Command Queue $2 Enqueue Pointer Address Register"
hexmask.long 0x0C 4.--31. 0x10 "CQEPA,Command queue enqueue pointer address"
repeat.end
group.long 0xE0++0x07 "Block 3 Registers"
line.long 0x00 "B3CQIER,Block 3 Command Queue Interrupt Enable Register"
bitfld.long 0x00 31. "CQ0TIE,Command queue 0 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CQ1TIE,Command queue 1 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 29. "CQ2TIE,Command queue 2 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 28. "CQ3TIE,Command queue 3 threshold interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 27. "CQ4TIE,Command queue 4 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 26. "CQ5TIE,Command queue 5 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 25. "CQ6TIE,Command queue 6 threshold interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 24. "CQ7TIE,Command queue 7 threshold interrupt enable" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "SQPEIE,Status queue programming error interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 15. "SQTIE,Status queue threshold interrupt enable" "Disabled,Enabled"
line.long 0x04 "B3CQIDR,Block 3 Command Queue Interrupt Detect Register"
eventfld.long 0x04 31. "CQ0T,Command queue 0 threshold" "Not crossed,Crossed"
eventfld.long 0x04 30. "CQ1T,Command queue 1 threshold" "Not crossed,Crossed"
eventfld.long 0x04 29. "CQ2T,Command queue 2 threshold" "Not crossed,Crossed"
eventfld.long 0x04 28. "CQ3T,Command queue 3 threshold" "Not crossed,Crossed"
newline
eventfld.long 0x04 27. "CQ4T,Command queue 4 threshold" "Not crossed,Crossed"
eventfld.long 0x04 26. "CQ5T,Command queue 5 threshold" "Not crossed,Crossed"
eventfld.long 0x04 25. "CQ6T,Command queue 6 threshold" "Not crossed,Crossed"
eventfld.long 0x04 24. "CQ7T,Command queue 7 threshold" "Not crossed,Crossed"
newline
eventfld.long 0x04 23. "SQPE,Status queue programming error" "No error,Error"
eventfld.long 0x04 15. "SQT,Status notification queue threshold" "Not reached,Reached"
group.long 0x800++0x03
line.long 0x00 "B3SQMR,Block 3 Status Queue Mode Register"
bitfld.long 0x00 31. "EN,Status queue enable" "Disabled,Enabled"
bitfld.long 0x00 30. "DI,Dequeue pointer increment" "Not incremented,Incremented"
bitfld.long 0x00 16.--19. "CQ_SIZE,Circular descriptor queue size" "64,128,256,512,1024,2048,4096,8192,16384,?..."
rgroup.long 0x804++0x03
line.long 0x00 "B3SQSR,Block 3 Status Queue Status Register"
bitfld.long 0x00 17. "QE,Queue empty" "Not empty,Empty"
bitfld.long 0x00 16. "QF,Queue full" "Not full,Full"
group.long 0x808++0x0F
line.long 0x00 "B3SQEDPAR,Block 3 Status Queue Extended Dequeue Pointer Address Register"
hexmask.long.byte 0x00 0.--7. 0x01 "SQDPA,Upper status queue dequeue pointer address bits"
line.long 0x04 "B3SQDPAR,Block 3 Status Queue Dequeue Pointer Address Register"
hexmask.long 0x04 4.--31. 0x10 "SQDPA,Status queue dequeue pointer address"
line.long 0x08 "B3SQEEPAR,Block 3 Status Queue Extended Enqueue Pointer Address Register"
hexmask.long.byte 0x08 0.--7. 0x01 "SQEPA,Extended status queue dequeue pointer address bits"
line.long 0x0C "B3SQEPAR,Block 3 Status Queue Enqueue Pointer Address Register"
hexmask.long 0x0C 4.--31. 0x10 "SQEPA,Status queue enqueue pointer address"
group.long 0x828++0x03
line.long 0x00 "B3SQICR,Block 3 Status Queue Interrupt Coalescing Register"
bitfld.long 0x00 31. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x00 16.--19. "ICST,Interrupt coalescing status notification threshold" "Disabled,1,2,4,8,16,32,64,128,256,512,1024,2048,?..."
hexmask.long.word 0x00 0.--15. 1. "ICTT,Interrupt coalescing timer threshold"
tree.end
tree.end
tree "SATA (SATA 3.0)"
base ad:0x03200000
tree "Generic Host Controller Registers"
rgroup.long 0x00++0x03
line.long 0x00 "CAP,HBA Capabilities Register"
bitfld.long 0x00 31. "S64A,64-bit addressing support" "Not supported,Supported"
bitfld.long 0x00 30. "SNCQ,Native command queuing support" "Not supported,Supported"
bitfld.long 0x00 29. "SSNTF,SNotification register support" "Not supported,Supported"
bitfld.long 0x00 28. "SMPS,Mechanical presence switch support" "Not supported,Supported"
newline
bitfld.long 0x00 27. "SSS,Staggered spin-up support" "Not supported,Supported"
bitfld.long 0x00 26. "SALP,Aggressive link power management support" "Not supported,Supported"
bitfld.long 0x00 25. "SAL,Activity LED support" "Not supported,Supported"
bitfld.long 0x00 24. "SCLO,Command list override support" "Not supported,Supported"
newline
bitfld.long 0x00 20.--23. "ISS,Interface speed support" ",Gen 1 (1.5 Gbps),Gen 2 (3 Gbps),Gen 3 (6 Gbps),?..."
bitfld.long 0x00 18. "SAM,AHCI only mode support" "Not supported,Supported"
bitfld.long 0x00 17. "SPM,Port multiplier support" "Not supported,Supported"
bitfld.long 0x00 16. "FBSS,FIS-based switching support" "Not supported,Supported"
newline
bitfld.long 0x00 15. "PMD,PIO multiple DRQ block support" "Not supported,Supported"
bitfld.long 0x00 14. "SSC,Slumber state capable" "Not capable,Capable"
bitfld.long 0x00 13. "PSC,Partial state capable" "Not capable,Capable"
bitfld.long 0x00 8.--12. "NCS,Number of command slots" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32"
newline
bitfld.long 0x00 7. "CCCS,Command completion coalescing support" "Not supported,Supported"
bitfld.long 0x00 6. "EMS,Enclosure management support" "Not supported,Supported"
bitfld.long 0x00 5. "SXS,External SATA support" "Not supported,Supported"
bitfld.long 0x00 0.--4. "NP,Number of ports" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32"
if (((per.l(ad:0x03200000)&0x40000)==0x00))
group.long 0x04++0x03
line.long 0x00 "GHC,Global HBA Control Register"
bitfld.long 0x00 31. "AE,AHCI enable" "Disabled,Enabled"
rbitfld.long 0x00 2. "MRSM,MSI revert to single message" "Not reverted,Reverted"
bitfld.long 0x00 1. "IE,Interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "HR,HBA reset" "No reset,Reset"
else
group.long 0x04++0x03
line.long 0x00 "GHC,Global HBA Control Register"
rbitfld.long 0x00 31. "AE,AHCI enable" "Disabled,Enabled"
rbitfld.long 0x00 2. "MRSM,MSI revert to single message" "Not reverted,Reverted"
bitfld.long 0x00 1. "IE,Interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 0. "HR,HBA reset" "No reset,Reset"
endif
rgroup.long 0x10++0x03
line.long 0x00 "VS,AHCI Version Register"
hexmask.long.word 0x00 16.--31. 1. "MJR,Major version number"
hexmask.long.word 0x00 0.--15. 1. "MNR,Minor version number"
group.long 0x14++0x03
line.long 0x00 "CCC_CTL,Command Completion Coalescing Control Register"
hexmask.long.word 0x00 16.--31. 1. "TV,Timeout value"
hexmask.long.byte 0x00 8.--15. 1. "CC,Command completions"
rbitfld.long 0x00 3.--7. "INT,Interrupt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0. "EN,Enable" "Disabled,Enabled"
rgroup.long 0x24++0x03
line.long 0x00 "CAP2,HBA Capabilities Extended Register"
bitfld.long 0x00 2. "APST,Automatic partial to slumber transitions support" "Not supported,Supported"
bitfld.long 0x00 1. "NVMP,NVMHCI present" "Not present,Present"
bitfld.long 0x00 0. "BOH,BIOS/OS handoff support" "Not supported,Supported"
tree.end
tree "Vendor-Specific Registers"
group.long 0xA4++0x27
line.long 0x00 "PCFG,Port Config Register"
hexmask.long.byte 0x00 16.--22. 1. "TPSS,Microsecond timer post scaler"
bitfld.long 0x00 12.--14. "TPRS,Microsecond timer pre scaler" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 0.--5. "PAD,Port address" ",,Addr config,?..."
line.long 0x04 "PPCFG,Port Phy1Cfg Register"
bitfld.long 0x04 31. "ESDF,Enable signal detect filter" "Disabled,Enabled"
bitfld.long 0x04 30. "ERSN,Enable reset speed negotiation" "Disabled,Enabled"
bitfld.long 0x04 29. "PSS,PhyControl SerDes slumber" "Not selected,Selected"
bitfld.long 0x04 28. "PSSO,PhyControl select SerDes OOB" "SerDes decoded,Internally decoded"
newline
rbitfld.long 0x04 27. "STB,Status bit" "Fixed freq. clk,Variable clk"
bitfld.long 0x04 26. "PBPNA,PhyControl BIST pattern no aligns" "No,Yes"
bitfld.long 0x04 25. "PBCE,PhyControl BIST clear error" "Not cleared,Cleared"
bitfld.long 0x04 24. "PBPE,PhyControl BIST pattern enable" "Disabled,Enabled"
newline
bitfld.long 0x04 21.--23. "PBPS,PhyControl BIST pattern select" "LBP,LFTP,MFTP,HFTP,PRBS,BIST,?..."
bitfld.long 0x04 20. "FPR,Force PHY ready" "Not forced,Forced"
bitfld.long 0x04 18. "SNR,Speed negotiation rate" "0,1"
bitfld.long 0x04 17. "SNM,Speed negotiation method" "Decremented,Incremented"
newline
hexmask.long.tbyte 0x04 0.--16. 1. "TTA,Time period that the controller transmit and waits for ALIGNp during speed negotiation"
line.long 0x08 "PP2C,Port Phy2Cfg Register"
hexmask.long.byte 0x08 24.--31. 1. "CINMP,COMINIT negate minimum period"
hexmask.long.byte 0x08 16.--23. 1. "CIBGN,COMINIT burst gap nominal"
hexmask.long.byte 0x08 8.--15. 1. "CIBGMX,COMINIT burst gap maximum"
hexmask.long.byte 0x08 0.--7. 1. "CIBGMN,COMINIT burst gap minimum"
line.long 0x0C "PP3C,Port Phy3Cfg Register"
hexmask.long.byte 0x0C 24.--31. 1. "CWNMP,COMWAKE negate minimum period"
hexmask.long.byte 0x0C 16.--23. 1. "CWBGN,COMWAKE burst gap nominal"
hexmask.long.byte 0x0C 8.--15. 1. "CWBGMX,COMWAKE burst gap maximum"
hexmask.long.byte 0x0C 0.--7. 1. "CWBGMN,COMWAKE burst gap minimum"
line.long 0x10 "PP4C,Port Phy4Cfg Register"
hexmask.long.byte 0x10 24.--31. 1. "PTST,Partial to slumber timer"
hexmask.long.byte 0x10 16.--23. 1. "SFD,Signal failure detection"
hexmask.long.byte 0x10 8.--15. 1. "BNM,COM burst nominal"
hexmask.long.byte 0x10 0.--7. 1. "BMX,COM burst maximum"
line.long 0x14 "PP5C,Port Phy5Cfg Register"
hexmask.long.word 0x14 20.--31. 1. "RCT,Rate change timer"
hexmask.long.tbyte 0x14 0.--19. 1. "RIT,Retry interval timer"
line.long 0x18 "AXICC,AXI Cache Control Register"
bitfld.long 0x18 29. "EARC,Enable ARCACHE" "Disabled,Enabled"
bitfld.long 0x18 28. "EAWC,Enable AWCACHE" "Disabled,Enabled"
hexmask.long.byte 0x18 24.--27. 0x01 "AWCF,Address write cache FIS"
hexmask.long.byte 0x18 20.--23. 0x01 "AWCD,Address write cache data"
newline
hexmask.long.byte 0x18 16.--19. 0x01 "AWCFD,Address write cache final data"
hexmask.long.byte 0x18 12.--15. 0x10 "ARCP,Address read cache PRD"
hexmask.long.byte 0x18 8.--11. 0x01 "ARCH,Address read cache header"
hexmask.long.byte 0x18 4.--7. 0x10 "ARCF,Address read cache FIS"
newline
hexmask.long.byte 0x18 0.--3. 0x01 "ARCA,Address read cache ATAPI"
line.long 0x1C "PAXIC,Port AXICfg Register"
bitfld.long 0x1C 28. "ENPE,Enable non-zero 4 MB PRD entries" "Disabled,Enabled"
bitfld.long 0x1C 25. "AAO,Allow address overwrite" "Not allowed,Allowed"
bitfld.long 0x1C 24. "ECM,Enable the context management" "Disabled,Enabled"
bitfld.long 0x1C 20.--23. "OTL,Outstanding transfer limit" "Limited by TLFIFO,?..."
newline
bitfld.long 0x1C 16.--19. "MARIDD,Memory address read ID for data transfers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x1C 12.--15. "MARID,Memory address read ID for non data transfers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x1C 8.--11. "MAWIDD,Memory address write ID for data transfers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x1C 4.--7. "MAWID,Memory address write ID for non data transfers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x20 "AXIPC,AXI PROT Control Register"
bitfld.long 0x20 29. "EARP,Enable ARPROT" "Disabled,Enabled"
bitfld.long 0x20 28. "EAWP,Enable AWPROT" "Disabled,Enabled"
hexmask.long.byte 0x20 24.--26. 0x01 "AWPF,Address write PROT FIS"
hexmask.long.byte 0x20 20.--22. 0x10 "AWPD,Address write PROT data"
newline
hexmask.long.byte 0x20 16.--18. 0x01 "AWPFD,Address write PROT final data"
hexmask.long.byte 0x20 12.--14. 0x10 "ARPP,Address read PROT PRD"
hexmask.long.byte 0x20 8.--10. 0x01 "ARPH,Address read PROT header"
hexmask.long.byte 0x20 4.--6. 0x10 "ARPF,Address read PROT FIS"
newline
hexmask.long.byte 0x20 0.--2. 0x01 "ARPD,Address read PROT data"
line.long 0x24 "PTC,Port TransCfg Register"
bitfld.long 0x24 9. "ITM,Initialize transport memories" "Not initialized,Initialized"
bitfld.long 0x24 8. "ENBD,Enable back down" "Disabled,Enabled"
hexmask.long.byte 0x24 0.--6. 1. "TXWM,RxWaterMark"
group.long 0xD0++0x0B
line.long 0x00 "PLC,Port LinkCFG Register"
bitfld.long 0x00 27.--31. "PMPRA,Power management primitive rate acknowledge" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 26. "POE,Primitive override enable" "Disabled,Enabled"
hexmask.long.word 0x00 16.--25. 1. "PRT,PHY ready timer"
hexmask.long.byte 0x00 8.--15. 1. "AIR,ALIGN insertion rate"
newline
bitfld.long 0x00 7. "EPNRT,Enable PHY not ready timer" "Disabled,Enabled"
bitfld.long 0x00 6. "S4A,Send 4 aligns" "Not sent,Sent"
bitfld.long 0x00 5. "RXSE,Rx scramble enable" "Disabled,Enabled"
bitfld.long 0x00 4. "TXSE,Tx scramble enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "TXPJ,Tx prim junk" "0,1"
bitfld.long 0x00 2. "TXC,Tx CONT" "Disabled,Enabled"
bitfld.long 0x00 1. "RXBC,Rx bad CRC" "Disabled,Enabled"
bitfld.long 0x00 0. "TXBC,Tx bad CRC" "Disabled,Enabled"
line.long 0x04 "PLC1,Port LinkCfg1 Register"
bitfld.long 0x04 6. "CD,Data character or primitive" "Data,Primitive"
bitfld.long 0x04 0.--5. "POS,Primitive override state" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x08 "PLC2,Port LinkCfg2 Register"
group.long 0xE0++0x0B
line.long 0x00 "PLS1,Port LinkStatus1 Register"
hexmask.long.byte 0x00 24.--31. 1. "KCEC,Kchar error count"
hexmask.long.byte 0x00 16.--23. 1. "PIEC,PHY internal error count"
hexmask.long.byte 0x00 8.--15. 1. "CEC,Code error count"
hexmask.long.byte 0x00 0.--7. 1. "DEC,Disparity error count"
line.long 0x04 "PCMDC,Port CmdConfig Register"
bitfld.long 0x04 29. "TSVIE,Trustzone slave ID violation interrupt enable" "Disabled,Enabled"
bitfld.long 0x04 28. "TSVI,Trustzone slave ID violation interrupt" "No interrupt,Interrupt"
rhexmask.long.word 0x04 12.--27. 1. "TSVT,Trustzone slave ID of violating transaction"
bitfld.long 0x04 1. "ETLL,Enable transport layer loopback" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "ETLLB,Enable transport layer loopback in BIST-L mode" "Disabled,Enabled"
line.long 0x08 "PPCS,Port PhyControl Status Register"
rbitfld.long 0x08 30.--31. "PHYCE,Current 2-bit code error" "0,1,2,3"
rbitfld.long 0x08 28.--29. "PHYDE,Current 2-bit disparity error" "0,1,2,3"
rbitfld.long 0x08 27. "PHYKC,Current 1-bit K character" "0,1"
hexmask.long.tbyte 0x08 11.--26. 1. "PHYD,Current 16-bit data"
newline
bitfld.long 0x08 10. "CCAC,Comma alignment change" "Not changed,Changed"
rbitfld.long 0x08 5.--9. "CCA,Current comma alignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rbitfld.long 0x08 0.--4. "PCTRLS,PHY control state" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xF0++0x03
line.long 0x00 "TCR,Timer Control Register"
hexmask.long.word 0x00 0.--12. 1. "TPS,Timer preScalar value"
tree.end
tree "Port 0 Port Control Registers"
group.long 0x100++0x0F
line.long 0x00 "P0CLB,Port 0 Command List Base Address Register"
hexmask.long.tbyte 0x00 10.--31. 0x04 "CLB,Command list base address"
line.long 0x04 "P0CLBU,Port 0 Command List Base Upper 32-bit Register"
line.long 0x08 "P0FB,Port 0 FIS Base Address Register"
hexmask.long.tbyte 0x08 8.--31. 0x01 "FB,FIS base address"
line.long 0x0C "P0FBU,Port 0 FIS Base Address Upper 32-bit Register"
if (((per.l(ad:0x03200000)&0x10000000)==0x10000000))&&(((per.l(ad:0x03200000+0x118)&0x80000)==0x80000))
group.long 0x110++0x03
line.long 0x00 "P0IS,Port 0 Interrupt Status Register"
bitfld.long 0x00 31. "CPDS,Cold port detect status" "Not detected,Detected"
bitfld.long 0x00 30. "TFES,Task file error status" "No error,Error"
bitfld.long 0x00 29. "HBFS,Host bus fatal error status" "No error,Error"
bitfld.long 0x00 28. "HBDS,Host bus data error status" "No error,Error"
newline
bitfld.long 0x00 27. "IFS,Interface fatal error status" "No error,Error"
bitfld.long 0x00 26. "NTFS,Interface non-fatal error status" "No error,Error"
bitfld.long 0x00 24. "OFS,Overflow status" "No overflow,Overflow"
bitfld.long 0x00 23. "IPMS,Incorrect port multiplier status" "Correct,Incorrect"
newline
rbitfld.long 0x00 22. "PRCS,PhyRdy change status" "Not changed,Changed"
bitfld.long 0x00 7. "DMPS,Device mechanical presence status" "0,1"
rbitfld.long 0x00 6. "PCS,Port connect change status" "Not changed,Changed"
bitfld.long 0x00 5. "DPS,Descriptor processed" "Not processed,Processed"
newline
rbitfld.long 0x00 4. "UFS,Unknown FIS interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 3. "SDBS,Set device bits interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "DSS,DMA setup FIS interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "PSS,PIO setup FIS interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 0. "DHRS,Device to host register FIS interrupt" "No interrupt,Interrupt"
else
group.long 0x110++0x03
line.long 0x00 "P0IS,Port 0 Interrupt Status Register"
bitfld.long 0x00 31. "CPDS,Cold port detect status" "Not detected,Detected"
bitfld.long 0x00 30. "TFES,Task file error status" "No error,Error"
bitfld.long 0x00 29. "HBFS,Host bus fatal error status" "No error,Error"
bitfld.long 0x00 28. "HBDS,Host bus data error status" "No error,Error"
newline
bitfld.long 0x00 27. "IFS,Interface fatal error status" "No error,Error"
bitfld.long 0x00 26. "NTFS,Interface non-fatal error status" "No error,Error"
bitfld.long 0x00 24. "OFS,Overflow status" "No overflow,Overflow"
bitfld.long 0x00 23. "IPMS,Incorrect port multiplier status" "Correct,Incorrect"
newline
rbitfld.long 0x00 22. "PRCS,PhyRdy change status" "Not changed,Changed"
rbitfld.long 0x00 6. "PCS,Port connect change status" "Not changed,Changed"
bitfld.long 0x00 5. "DPS,Descriptor processed" "Not processed,Processed"
rbitfld.long 0x00 4. "UFS,Unknown FIS interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x00 3. "SDBS,Set device bits interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 2. "DSS,DMA setup FIS interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 1. "PSS,PIO setup FIS interrupt" "No interrupt,Interrupt"
bitfld.long 0x00 0. "DHRS,Device to host register FIS interrupt" "No interrupt,Interrupt"
endif
if (((per.l(ad:0x03200000)&0x20000)==0x20000))
if (((per.l(ad:0x03200000)&0x4000000)==0x4000000))&&(((per.l(ad:0x03200000+0x118)&0x01)==0x01))
group.long 0x118++0x03
line.long 0x00 "P0CMD,Port 0 Command And Status Register"
bitfld.long 0x00 28.--31. "ICC,Interface communication control" "Idle,Active,Partial,,,,Slumber,?..."
bitfld.long 0x00 27. "ASP,Aggressive slumber/partial" "Partial,Slumber"
bitfld.long 0x00 26. "ALPE,Aggressive link power management enable" "Disabled,Enabled"
bitfld.long 0x00 23. "APSTE,Automatic partial to slumber transitions enable" "Disabled,Enabled"
newline
rbitfld.long 0x00 22. "FBSCP,FIS-based switching capable port" "Not supported,Supported"
rbitfld.long 0x00 21. "ESP,External SATA port" "Disabled,Enabled"
rbitfld.long 0x00 20. "CPD,Cold presence detection" "Not supported,Supported"
rbitfld.long 0x00 19. "MPSP,Mechanical presence switch attached to port" "Not supported,Supported"
newline
rbitfld.long 0x00 18. "HPCP,Hot plug capable port enable" "Disabled,Enabled"
bitfld.long 0x00 17. "PMA,Port multiplier attached" "Not attached,Attached"
rbitfld.long 0x00 16. "CPS,Cold presence state" "Not attached,Attached"
rbitfld.long 0x00 15. "CR,Command list running" "Not running,Running"
newline
rbitfld.long 0x00 14. "FR,FIS receive running" "Not running,Running"
rbitfld.long 0x00 13. "MPSS,Mechanical presence switch state" "Closed,Opened"
bitfld.long 0x00 8.--12. "CCS,Current command slot" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 4. "FRE,FIS receive enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CLO,Command list override" "Not overridden,Overridden"
bitfld.long 0x00 2. "POD,Power-on device" "Disabled,Enabled"
bitfld.long 0x00 1. "SUD,Spin-up device" "Not supported,Supported"
bitfld.long 0x00 0. "ST,Start" "Not processed,Processed"
elif (((per.l(ad:0x03200000)&0x4000000)==0x4000000))&&(((per.l(ad:0x03200000+0x118)&0x01)==0x00))
group.long 0x118++0x03
line.long 0x00 "P0CMD,Port 0 Command And Status Register"
bitfld.long 0x00 28.--31. "ICC,Interface communication control" "Idle,Active,Partial,,,,Slumber,?..."
bitfld.long 0x00 27. "ASP,Aggressive slumber/partial" "Partial,Slumber"
bitfld.long 0x00 26. "ALPE,Aggressive link power management enable" "Disabled,Enabled"
bitfld.long 0x00 23. "APSTE,Automatic partial to slumber transitions enable" "Disabled,Enabled"
newline
rbitfld.long 0x00 22. "FBSCP,FIS-based switching capable port" "Not supported,Supported"
rbitfld.long 0x00 21. "ESP,External SATA port" "Disabled,Enabled"
rbitfld.long 0x00 20. "CPD,Cold presence detection" "Not supported,Supported"
rbitfld.long 0x00 19. "MPSP,Mechanical presence switch attached to port" "Not supported,Supported"
newline
rbitfld.long 0x00 18. "HPCP,Hot plug capable port enable" "Disabled,Enabled"
bitfld.long 0x00 17. "PMA,Port multiplier attached" "Not attached,Attached"
rbitfld.long 0x00 16. "CPS,Cold presence state" "Not attached,Attached"
rbitfld.long 0x00 15. "CR,Command list running" "Not running,Running"
newline
rbitfld.long 0x00 14. "FR,FIS receive running" "Not running,Running"
rbitfld.long 0x00 13. "MPSS,Mechanical presence switch state" "Closed,Opened"
bitfld.long 0x00 4. "FRE,FIS receive enable" "Disabled,Enabled"
bitfld.long 0x00 3. "CLO,Command list override" "Not overridden,Overridden"
newline
bitfld.long 0x00 2. "POD,Power-on device" "Disabled,Enabled"
bitfld.long 0x00 1. "SUD,Spin-up device" "Not supported,Supported"
bitfld.long 0x00 0. "ST,Start" "Not processed,Processed"
elif (((per.l(ad:0x03200000)&0x4000000)==0x00))&&(((per.l(ad:0x03200000+0x118)&0x01)==0x01))
group.long 0x118++0x03
line.long 0x00 "P0CMD,Port 0 Command And Status Register"
bitfld.long 0x00 28.--31. "ICC,Interface communication control" "Idle,Active,Partial,,,,Slumber,?..."
bitfld.long 0x00 23. "APSTE,Automatic partial to slumber transitions enable" "Disabled,Enabled"
rbitfld.long 0x00 22. "FBSCP,FIS-based switching capable port" "Not supported,Supported"
rbitfld.long 0x00 21. "ESP,External SATA port" "Disabled,Enabled"
newline
rbitfld.long 0x00 20. "CPD,Cold presence detection" "Not supported,Supported"
rbitfld.long 0x00 19. "MPSP,Mechanical presence switch attached to port" "Not supported,Supported"
rbitfld.long 0x00 18. "HPCP,Hot plug capable port enable" "Disabled,Enabled"
bitfld.long 0x00 17. "PMA,Port multiplier attached" "Not attached,Attached"
newline
rbitfld.long 0x00 16. "CPS,Cold presence state" "Not attached,Attached"
rbitfld.long 0x00 15. "CR,Command list running" "Not running,Running"
rbitfld.long 0x00 14. "FR,FIS receive running" "Not running,Running"
rbitfld.long 0x00 13. "MPSS,Mechanical presence switch state" "Closed,Opened"
newline
bitfld.long 0x00 8.--12. "CCS,Current command slot" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 4. "FRE,FIS receive enable" "Disabled,Enabled"
bitfld.long 0x00 3. "CLO,Command list override" "Not overridden,Overridden"
bitfld.long 0x00 2. "POD,Power-on device" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "SUD,Spin-up device" "Not supported,Supported"
bitfld.long 0x00 0. "ST,Start" "Not processed,Processed"
elif (((per.l(ad:0x03200000)&0x4000000)==0x00))&&(((per.l(ad:0x03200000+0x118)&0x01)==0x00))
group.long 0x118++0x03
line.long 0x00 "P0CMD,Port 0 Command And Status Register"
bitfld.long 0x00 28.--31. "ICC,Interface communication control" "Idle,Active,Partial,,,,Slumber,?..."
bitfld.long 0x00 23. "APSTE,Automatic partial to slumber transitions enable" "Disabled,Enabled"
rbitfld.long 0x00 22. "FBSCP,FIS-based switching capable port" "Not supported,Supported"
rbitfld.long 0x00 21. "ESP,External SATA port" "Disabled,Enabled"
newline
rbitfld.long 0x00 20. "CPD,Cold presence detection" "Not supported,Supported"
rbitfld.long 0x00 19. "MPSP,Mechanical presence switch attached to port" "Not supported,Supported"
rbitfld.long 0x00 18. "HPCP,Hot plug capable port enable" "Disabled,Enabled"
bitfld.long 0x00 17. "PMA,Port multiplier attached" "Not attached,Attached"
newline
rbitfld.long 0x00 16. "CPS,Cold presence state" "Not attached,Attached"
rbitfld.long 0x00 15. "CR,Command list running" "Not running,Running"
rbitfld.long 0x00 14. "FR,FIS receive running" "Not running,Running"
rbitfld.long 0x00 13. "MPSS,Mechanical presence switch state" "Closed,Opened"
newline
bitfld.long 0x00 4. "FRE,FIS receive enable" "Disabled,Enabled"
bitfld.long 0x00 3. "CLO,Command list override" "Not overridden,Overridden"
bitfld.long 0x00 2. "POD,Power-on device" "Disabled,Enabled"
bitfld.long 0x00 1. "SUD,Spin-up device" "Not supported,Supported"
newline
bitfld.long 0x00 0. "ST,Start" "Not processed,Processed"
endif
else
if (((per.l(ad:0x03200000)&0x4000000)==0x4000000))&&(((per.l(ad:0x03200000+0x118)&0x01)==0x01))
group.long 0x118++0x03
line.long 0x00 "P0CMD,Port 0 Command And Status Register"
bitfld.long 0x00 28.--31. "ICC,Interface communication control" "Idle,Active,Partial,,,,Slumber,?..."
bitfld.long 0x00 27. "ASP,Aggressive slumber/partial" "Partial,Slumber"
bitfld.long 0x00 26. "ALPE,Aggressive link power management enable" "Disabled,Enabled"
bitfld.long 0x00 23. "APSTE,Automatic partial to slumber transitions enable" "Disabled,Enabled"
newline
rbitfld.long 0x00 22. "FBSCP,FIS-based switching capable port" "Not supported,Supported"
rbitfld.long 0x00 21. "ESP,External SATA port" "Disabled,Enabled"
rbitfld.long 0x00 20. "CPD,Cold presence detection" "Not supported,Supported"
rbitfld.long 0x00 19. "MPSP,Mechanical presence switch attached to port" "Not supported,Supported"
newline
rbitfld.long 0x00 18. "HPCP,Hot plug capable port enable" "Disabled,Enabled"
rbitfld.long 0x00 17. "PMA,Port multiplier attached" "Not attached,Attached"
rbitfld.long 0x00 16. "CPS,Cold presence state" "Not attached,Attached"
rbitfld.long 0x00 15. "CR,Command list running" "Not running,Running"
newline
rbitfld.long 0x00 14. "FR,FIS receive running" "Not running,Running"
rbitfld.long 0x00 13. "MPSS,Mechanical presence switch state" "Closed,Opened"
bitfld.long 0x00 8.--12. "CCS,Current command slot" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 4. "FRE,FIS receive enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "CLO,Command list override" "Not overridden,Overridden"
bitfld.long 0x00 2. "POD,Power-on device" "Disabled,Enabled"
bitfld.long 0x00 1. "SUD,Spin-up device" "Not supported,Supported"
bitfld.long 0x00 0. "ST,Start" "Not processed,Processed"
elif (((per.l(ad:0x03200000)&0x4000000)==0x4000000))&&(((per.l(ad:0x03200000+0x118)&0x01)==0x00))
group.long 0x118++0x03
line.long 0x00 "P0CMD,Port 0 Command And Status Register"
bitfld.long 0x00 28.--31. "ICC,Interface communication control" "Idle,Active,Partial,,,,Slumber,?..."
bitfld.long 0x00 27. "ASP,Aggressive slumber/partial" "Partial,Slumber"
bitfld.long 0x00 26. "ALPE,Aggressive link power management enable" "Disabled,Enabled"
bitfld.long 0x00 23. "APSTE,Automatic partial to slumber transitions enable" "Disabled,Enabled"
newline
rbitfld.long 0x00 22. "FBSCP,FIS-based switching capable port" "Not supported,Supported"
rbitfld.long 0x00 21. "ESP,External SATA port" "Disabled,Enabled"
rbitfld.long 0x00 20. "CPD,Cold presence detection" "Not supported,Supported"
rbitfld.long 0x00 19. "MPSP,Mechanical presence switch attached to port" "Not supported,Supported"
newline
rbitfld.long 0x00 18. "HPCP,Hot plug capable port enable" "Disabled,Enabled"
rbitfld.long 0x00 17. "PMA,Port multiplier attached" "Not attached,Attached"
rbitfld.long 0x00 16. "CPS,Cold presence state" "Not attached,Attached"
rbitfld.long 0x00 15. "CR,Command list running" "Not running,Running"
newline
rbitfld.long 0x00 14. "FR,FIS receive running" "Not running,Running"
rbitfld.long 0x00 13. "MPSS,Mechanical presence switch state" "Closed,Opened"
bitfld.long 0x00 4. "FRE,FIS receive enable" "Disabled,Enabled"
bitfld.long 0x00 3. "CLO,Command list override" "Not overridden,Overridden"
newline
bitfld.long 0x00 2. "POD,Power-on device" "Disabled,Enabled"
bitfld.long 0x00 1. "SUD,Spin-up device" "Not supported,Supported"
bitfld.long 0x00 0. "ST,Start" "Not processed,Processed"
elif (((per.l(ad:0x03200000)&0x4000000)==0x00))&&(((per.l(ad:0x03200000+0x118)&0x01)==0x01))
group.long 0x118++0x03
line.long 0x00 "P0CMD,Port 0 Command And Status Register"
bitfld.long 0x00 28.--31. "ICC,Interface communication control" "Idle,Active,Partial,,,,Slumber,?..."
bitfld.long 0x00 23. "APSTE,Automatic partial to slumber transitions enable" "Disabled,Enabled"
rbitfld.long 0x00 22. "FBSCP,FIS-based switching capable port" "Not supported,Supported"
rbitfld.long 0x00 21. "ESP,External SATA port" "Disabled,Enabled"
newline
rbitfld.long 0x00 20. "CPD,Cold presence detection" "Not supported,Supported"
rbitfld.long 0x00 19. "MPSP,Mechanical presence switch attached to port" "Not supported,Supported"
rbitfld.long 0x00 18. "HPCP,Hot plug capable port enable" "Disabled,Enabled"
rbitfld.long 0x00 17. "PMA,Port multiplier attached" "Not attached,Attached"
newline
rbitfld.long 0x00 16. "CPS,Cold presence state" "Not attached,Attached"
rbitfld.long 0x00 15. "CR,Command list running" "Not running,Running"
rbitfld.long 0x00 14. "FR,FIS receive running" "Not running,Running"
rbitfld.long 0x00 13. "MPSS,Mechanical presence switch state" "Closed,Opened"
newline
bitfld.long 0x00 8.--12. "CCS,Current command slot" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 4. "FRE,FIS receive enable" "Disabled,Enabled"
bitfld.long 0x00 3. "CLO,Command list override" "Not overridden,Overridden"
bitfld.long 0x00 2. "POD,Power-on device" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "SUD,Spin-up device" "Not supported,Supported"
bitfld.long 0x00 0. "ST,Start" "Not processed,Processed"
elif (((per.l(ad:0x03200000)&0x4000000)==0x00))&&(((per.l(ad:0x03200000+0x118)&0x01)==0x00))
group.long 0x118++0x03
line.long 0x00 "P0CMD,Port 0 Command And Status Register"
bitfld.long 0x00 28.--31. "ICC,Interface communication control" "Idle,Active,Partial,,,,Slumber,?..."
bitfld.long 0x00 23. "APSTE,Automatic partial to slumber transitions enable" "Disabled,Enabled"
rbitfld.long 0x00 22. "FBSCP,FIS-based switching capable port" "Not supported,Supported"
rbitfld.long 0x00 21. "ESP,External SATA port" "Disabled,Enabled"
newline
rbitfld.long 0x00 20. "CPD,Cold presence detection" "Not supported,Supported"
rbitfld.long 0x00 19. "MPSP,Mechanical presence switch attached to port" "Not supported,Supported"
rbitfld.long 0x00 18. "HPCP,Hot plug capable port enable" "Disabled,Enabled"
rbitfld.long 0x00 17. "PMA,Port multiplier attached" "Not attached,Attached"
newline
rbitfld.long 0x00 16. "CPS,Cold presence state" "Not attached,Attached"
rbitfld.long 0x00 15. "CR,Command list running" "Not running,Running"
rbitfld.long 0x00 14. "FR,FIS receive running" "Not running,Running"
rbitfld.long 0x00 13. "MPSS,Mechanical presence switch state" "Closed,Opened"
newline
bitfld.long 0x00 4. "FRE,FIS receive enable" "Disabled,Enabled"
bitfld.long 0x00 3. "CLO,Command list override" "Not overridden,Overridden"
bitfld.long 0x00 2. "POD,Power-on device" "Disabled,Enabled"
bitfld.long 0x00 1. "SUD,Spin-up device" "Not supported,Supported"
newline
bitfld.long 0x00 0. "ST,Start" "Not processed,Processed"
endif
endif
rgroup.long 0x128++0x03
line.long 0x00 "P0SSTS,Port 0 SATA Status Register"
bitfld.long 0x00 8.--11. "IPM,Interface power management state" "Not presented,Active,Partial,,,,Slumber,?..."
bitfld.long 0x00 4.--7. "SPD,Current interface speed" "Not presented,Generation 1,Generation 2,Generation 3,?..."
bitfld.long 0x00 0.--3. "DET,Device detection" "Not detected,PHY not connected,,PHY connected,PHY offline,?..."
if (((per.l(ad:0x03200000+0x118)&0x01)==0x00))
group.long 0x12C++0x03
line.long 0x00 "P0SCTL,Port 0 SATA Control Register"
bitfld.long 0x00 8.--11. "IPM,Interface power management transitions disable select" "No restrictions,Partial,Slumber,Both,?..."
bitfld.long 0x00 4.--7. "SPD,Speed limit negotiation" "No restrictions,< Gen1,<= Gen2,<= Gen3,?..."
bitfld.long 0x00 0.--3. "DET,Device detection initialization" "Not detected,Communication established,,,SATA disabled,?..."
else
group.long 0x12C++0x03
line.long 0x00 "P0SCTL,Port 0 SATA Control Register"
bitfld.long 0x00 8.--11. "IPM,Interface power management transitions disable select" "No restrictions,Partial,Slumber,Both,?..."
bitfld.long 0x00 4.--7. "SPD,Speed limit negotiation" "No restrictions,< Gen1,<= Gen2,<= Gen3,?..."
rbitfld.long 0x00 0.--3. "DET,Device detection initialization" "Not detected,Communication established,,,SATA disabled,?..."
endif
group.long 0x130++0x03
line.long 0x00 "P0SERR,Port 0 SATA Error Register"
bitfld.long 0x00 26. "DIAG[10],Exchange" "Not exchanged,Exchanged"
bitfld.long 0x00 25. "[9],Unknown FIS type" "Not received,Received"
bitfld.long 0x00 24. "[8],Transport state transition error" "No error,Error"
bitfld.long 0x00 23. "[7],Link sequence error" "No error,Error"
newline
bitfld.long 0x00 22. "[6],Handshake error" "No error,Error"
bitfld.long 0x00 21. "[5],CRC error" "No error,Error"
bitfld.long 0x00 20. "[4],Disparity error" "No error,Error"
bitfld.long 0x00 19. "[3],10B to 8B decode error" "No error,Error"
newline
bitfld.long 0x00 18. "[2],Comm wake" "Not detected,Detected"
bitfld.long 0x00 17. "[1],PHY internal error" "No error,Error"
bitfld.long 0x00 16. "[0],PhyRdy change" "Not changed,Changed"
newline
bitfld.long 0x00 11. "ERR[11],Internal error" "No error,Error"
bitfld.long 0x00 10. "[10],Protocol error" "No error,Error"
bitfld.long 0x00 9. "[9],Persistent communication or data integrity error" "No error,Error"
bitfld.long 0x00 8. "[8],Transient data integrity error" "No error,Error"
newline
bitfld.long 0x00 1. "[1],Recovered communications error" "No error,Error"
bitfld.long 0x00 0. "[0],Recovered data integrity error" "No error,Error"
group.long 0x138++0x03
line.long 0x00 "P0CI,Port 0 Command Issue Register"
if (((per.l(ad:0x03200000+0x140)&0x04)==0x04))
group.long 0x140++0x03
line.long 0x00 "P0FBS,Port 0 FIS-Based Switching Control Register"
rbitfld.long 0x00 16.--19. "DWE,Device with error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 12.--15. "ADO,Active device optimization number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "DEV,Device to issue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 2. "SDE,Single device error" "No error,Error"
newline
bitfld.long 0x00 1. "DEC,Device error clear" "Not cleared,Cleared"
bitfld.long 0x00 0. "EN,Enable" "Disabled,Enabled"
else
group.long 0x140++0x03
line.long 0x00 "P0FBS,Port 0 FIS-Based Switching Control Register"
rbitfld.long 0x00 12.--15. "ADO,Active device optimization number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 8.--11. "DEV,Device to issue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 2. "SDE,Single device error" "No error,Error"
bitfld.long 0x00 1. "DEC,Device error clear" "Not cleared,Cleared"
newline
bitfld.long 0x00 0. "EN,Enable" "Disabled,Enabled"
endif
group.long 0x170++0x03
line.long 0x00 "PBERR,Port 0 BIST Error Register"
bitfld.long 0x00 1. "BEOS,BIST error one shot bit" "Passed,Failed"
rbitfld.long 0x00 0. "BERR,BIST error" "Passing,Failing"
tree.end
tree.end
tree "SerDes (Serializer/Deserializer)"
tree "SerDes Registers"
base ad:0x01EA0000
if (((per.l(ad:0x01EA0000+0x0))&0x60000000)==0x00)
rgroup.long 0x0++0x03
line.long 0x00 "PLL1RSTCTL,SerDes PLL1 Reset Control Register"
bitfld.long 0x00 31. "RSTREQ,Reset request" "Not requested,Requested"
bitfld.long 0x00 30. "RST_DONE,Reset done" "Not done,Done"
newline
bitfld.long 0x00 29. "RST_ERR,Reset error" "No error,Error"
bitfld.long 0x00 7. "PLLRST_B,PLL reset" "No reset,Reset"
newline
bitfld.long 0x00 6. "SDRST_B,SRDS group reset" "No reset,Reset"
bitfld.long 0x00 5. "SDEN,SerDes enable" "Disabled,Enabled"
else
group.long 0x0++0x03
line.long 0x00 "PLL1RSTCTL,SerDes PLL1 Reset Control Register"
bitfld.long 0x00 31. "RSTREQ,Reset request" "Not requested,Requested"
rbitfld.long 0x00 30. "RST_DONE,Reset done" "Not done,Done"
newline
rbitfld.long 0x00 29. "RST_ERR,Reset error" "No error,Error"
bitfld.long 0x00 7. "PLLRST_B,PLL reset" "No reset,Reset"
newline
bitfld.long 0x00 6. "SDRST_B,SRDS group reset" "No reset,Reset"
bitfld.long 0x00 5. "SDEN,SerDes enable" "Disabled,Enabled"
endif
group.long (0x0+0x04)++0x07
line.long 0x00 "PLL1CR0,SerDes PLL1 Control Register 0"
bitfld.long 0x00 31. "POFF,PLL off" "On,Off"
bitfld.long 0x00 28.--30. "RFCLK_SEL,Reference clock frequency select" "100MHz,125MHz,156.25MHz,150MHz,?..."
newline
bitfld.long 0x00 27. "RFCLK_EN,L2 switch clock enable" "Disabled,Enabled"
rbitfld.long 0x00 23. "PLL_LCK,PLL lock" "Not locked,Locked"
newline
bitfld.long 0x00 16.--19. "FRATE_SEL,Select frequency of PLL VCO" "5.00GHz,,,,,,5.15625GHz,4.00GHz,,3.125GHz,3.00GHz,?..."
bitfld.long 0x00 0.--1. "DLYDIV_SEL,Select PLL1_EX_DLY_CLK divider value" "Off,?..."
line.long 0x04 "PLL1CR1,SerDes PLL1 Control Register 1"
bitfld.long 0x04 27. "PLLBW_SEL,Select higher PLL1 bandwidth" "Nominal,Higher"
group.long (0x0+0x18)++0x03
line.long 0x00 "PLL1CR5,SerDes PLL1 Control Register 5"
bitfld.long 0x00 31. "SEL_REFCLK_AMP_DIS,Disable the reference clock amplifier" "No,Yes"
bitfld.long 0x00 27. "LEFT_REF_BUF_EN,Enable for left directed reference clock buffer" "Disabled,Enabled"
newline
bitfld.long 0x00 24. "RIGHT_REF_BUF_EN,Enable for right directed reference clock buffer" "Disabled,Enabled"
if (((per.l(ad:0x01EA0000+0x20))&0x60000000)==0x00)
rgroup.long 0x20++0x03
line.long 0x00 "PLL2RSTCTL,SerDes PLL2 Reset Control Register"
bitfld.long 0x00 31. "RSTREQ,Reset request" "Not requested,Requested"
bitfld.long 0x00 30. "RST_DONE,Reset done" "Not done,Done"
newline
bitfld.long 0x00 29. "RST_ERR,Reset error" "No error,Error"
bitfld.long 0x00 7. "PLLRST_B,PLL reset" "No reset,Reset"
newline
bitfld.long 0x00 6. "SDRST_B,SRDS group reset" "No reset,Reset"
bitfld.long 0x00 5. "SDEN,SerDes enable" "Disabled,Enabled"
else
group.long 0x20++0x03
line.long 0x00 "PLL2RSTCTL,SerDes PLL2 Reset Control Register"
bitfld.long 0x00 31. "RSTREQ,Reset request" "Not requested,Requested"
rbitfld.long 0x00 30. "RST_DONE,Reset done" "Not done,Done"
newline
rbitfld.long 0x00 29. "RST_ERR,Reset error" "No error,Error"
bitfld.long 0x00 7. "PLLRST_B,PLL reset" "No reset,Reset"
newline
bitfld.long 0x00 6. "SDRST_B,SRDS group reset" "No reset,Reset"
bitfld.long 0x00 5. "SDEN,SerDes enable" "Disabled,Enabled"
endif
group.long (0x20+0x04)++0x07
line.long 0x00 "PLL2CR0,SerDes PLL2 Control Register 0"
bitfld.long 0x00 31. "POFF,PLL off" "On,Off"
bitfld.long 0x00 28.--30. "RFCLK_SEL,Reference clock frequency select" "100MHz,125MHz,156.25MHz,150MHz,?..."
newline
bitfld.long 0x00 27. "RFCLK_EN,L2 switch clock enable" "Disabled,Enabled"
rbitfld.long 0x00 23. "PLL_LCK,PLL lock" "Not locked,Locked"
newline
bitfld.long 0x00 16.--19. "FRATE_SEL,Select frequency of PLL VCO" "5.00GHz,,,,,,5.15625GHz,4.00GHz,,3.125GHz,3.00GHz,?..."
bitfld.long 0x00 0.--1. "DLYDIV_SEL,Select PLL2_EX_DLY_CLK divider value" "Off,?..."
line.long 0x04 "PLL2CR1,SerDes PLL2 Control Register 1"
bitfld.long 0x04 27. "PLLBW_SEL,Select higher PLL2 bandwidth" "Nominal,Higher"
group.long (0x20+0x18)++0x03
line.long 0x00 "PLL2CR5,SerDes PLL2 Control Register 5"
bitfld.long 0x00 31. "SEL_REFCLK_AMP_DIS,Disable the reference clock amplifier" "No,Yes"
bitfld.long 0x00 27. "LEFT_REF_BUF_EN,Enable for left directed reference clock buffer" "Disabled,Enabled"
newline
bitfld.long 0x00 24. "RIGHT_REF_BUF_EN,Enable for right directed reference clock buffer" "Disabled,Enabled"
group.long 0x90++0x07
line.long 0x00 "TCALCR,SerDes Transmit Calibration Control Register"
bitfld.long 0x00 27. "CALRST_B,Reset the transmit calibration" "Reset,Application"
line.long 0x04 "TCALCR1,SerDes Transmit Calibration Control Register 1"
bitfld.long 0x04 27. "DIG_OUT_REFCLK_EN,Enable CMOS digital buffered version of selected REF_CLK to the right" "Disabled,Enabled"
bitfld.long 0x04 24. "ANA_OUT_REF_CLK_EN,Enable CML analog buffered version of selected REF_CLK to the left" "Disabled,Enabled"
group.long 0xA0++0x07
line.long 0x00 "RCALCR,Receive Calibration Control Register"
bitfld.long 0x00 27. "CALRST_B,Reset the receiver calibration" "Reset,Application"
line.long 0x04 "RCALCR1,SerDes Receive Calibration Control Register 1"
bitfld.long 0x04 31. "ANA_IN_REFCLK_BUF_EN,Enable CML analog buffer used to transition SoC ref clock to 10G SerDes" "Disabled,Enabled"
bitfld.long 0x04 27. "DIG_OUT_REFCLK_EN,Enable CMOS digital buffered version of selected REF_CLK to the left" "Disabled,Enabled"
newline
bitfld.long 0x04 24. "ANA_OUT_REFCLK_EN,Enable CML analog buffered version of selected REF_CLK to the left" "Disabled,Enabled"
rbitfld.long 0x04 0.--1. "BI_REFCTL_OUT,Output COP DFT/BurnIn/JTAG reference clock controls to wrapper" "0,1,2,3"
group.long 0xB0++0x03
line.long 0x00 "GR0,General Control Register 0"
bitfld.long 0x00 14. "XPAD_SEL,Describes to SerDes module the value of the power supply being used" "High,Low"
repeat 4. (increment 0x100 0x20)(strings "A" "B" "C" "D")
rgroup.long $1++0x03
line.long 0x00 "LB$2PSSR0,Lane $2 Protocol Select Status Register 0"
hexmask.long.byte 0x00 24.--30. 1. "TYPE,Protocol type"
bitfld.long 0x00 20. "CNTRL,Controller group instance" "L2 switch,ENETC"
newline
bitfld.long 0x00 16.--19. "MAC,MAC instance" "MAC1,MAC2,MAC3,MAC4,?..."
bitfld.long 0x00 8.--10. "PCS,PCS instance of TYPE within PHY" "PCSa/1,PCSb/2,PCSc/3,PCSd/4,?..."
newline
bitfld.long 0x00 0.--3. "LANE,Lane number within PCS" "Lane 0,Lane 1,Lane 2,Lane 3,?..."
repeat.end
group.long 0x200++0x03
line.long 0x00 "PCCR0,Protocol Configuration Register 0"
bitfld.long 0x00 28.--30. "PEXA_CFG,PEXa configuration" "Disabled,x1 on lane 0,x2 [1:0] on lanes [1:0],x4 [3:0] on lanes [3:0],x1 on lane 3,?..."
bitfld.long 0x00 24.--26. "PEXB_CFG,PEXb configuration" "Disabled,x1 on lane 2,x2 [1:0] on lanes [3:2],?..."
group.long 0x208++0x03
line.long 0x00 "PCCR2,Protocol Configuration Register 2"
bitfld.long 0x00 28.--30. "SATAA_CFG,SATAa configuration" "Disabled,x1 on lane 3,?..."
bitfld.long 0x00 12.--14. "TXCLKA_CFG,TXCLKa configuration" "Disabled,x1 on lane 0,x1 on lane 1,x1 on lane 2,?..."
group.long 0x220++0x03
line.long 0x00 "PCCR8,Protocol Configuration Register 8"
bitfld.long 0x00 31. "SGMIIA_KX,SGMIIb 1000Base-KX configuration" "SGMII,1000Base-KX"
bitfld.long 0x00 28.--30. "SGMIIA_CFG,SGMIIa configuration" "Disabled,x1 on lane 0 to TSN L2 switch port 1,x1 on lane 0 to ENETC port 0,?..."
newline
bitfld.long 0x00 27. "SGMIIB_KX,SGMIIc 1000Base-KX configuration" "SGMII,1000Base-KX mode"
bitfld.long 0x00 24.--26. "SGMIIB_CFG,SGMIIb configuration" "Disabled,x1 on Lane 2 to TSN L2 switch port 3,x1 on lane 2 to ENETC port 0,?..."
newline
bitfld.long 0x00 23. "SGMIIC_KX,SGMIId 1000Base-KX configuration" "SGMII,1000Base-KX"
bitfld.long 0x00 20.--22. "SGMIIC_CFG,SGMIIc configuration" "Disabled,Lane 2 x1 to TSN L2 P3,Lane 2 x1 to ENETC P0,?..."
newline
bitfld.long 0x00 19. "SGMIID_KX,SGMIIe 1000Base-KX configuration" "SGMII,1000Base-KX"
bitfld.long 0x00 16.--18. "SGMIID_CFG,SGMIId configuration" "Disabled,x1 on lane 3 to TSN L2 switch port 4,?..."
group.long 0x224++0x03
line.long 0x00 "PCCR9,Protocol Configuration Register 9"
bitfld.long 0x00 28.--30. "QSGMIIA_CFG,QSGMIIa configuration" "Disabled,x1 on lane 1 connected to TSN L2 switch ports 1/2/3/4,?..."
bitfld.long 0x00 12.--14. "QXGMIIA_CFG,QXGMIIa configuration" "Disabled,10G-QXGMII,5G-DXGMII,?..."
group.long 0x22C++0x03
line.long 0x00 "PCCRB,Protocol Configuration Register B"
bitfld.long 0x00 28.--30. "SXGMIIA_CFG,SXGMIIa configuration" "Disabled,10G/5G-SXGGMII on lane 1 connected to ENETC port 0,?..."
group.long 0x300++0x03
line.long 0x00 "PEXEQCR,PCIe Equalization Configuration Register"
bitfld.long 0x00 6.--11. "FS,PCI express FS value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--5. "LF,PCI express LF value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
repeat 11. (increment 0x304 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "PEXEQP$2CR,PCIe Equalization Preset $2 Register"
bitfld.long 0x00 12.--17. "CP1,C(+1) preset value" "0b001100,0b001000,0b001010,0b000110,0b000000,0b000000,0b000000,0b001001,0b000110,0b000000,0b001010,?..."
bitfld.long 0x00 0.--5. "CM1,C(-1) preset value" "0b000000,0b000000,0b000000,0b000000,0b000000,0b000101,0b000110,0b000101,0b000110,0b000000,0b000110,?..."
repeat.end
repeat 4. (increment 0x800 0x40)(strings "A" "B" "C" "D")
group.long $1++0x07
line.long 0x00 "LN$2GCR0,General Control Register 0 - Lane $2"
bitfld.long 0x00 31. "RPLL_LES,Directs the RX portion of lane $2 to use the corresponding PLL" "PLL2,PLL1"
bitfld.long 0x00 28.--29. "RRAT_SEL,Receiver speed selection for lane $2" "FRATE_SEL,FRATE_SEL/2,FRATE_SEL/4,FRATE_SEL*2"
newline
bitfld.long 0x00 27. "TPLL_LES,Direct the TX portion of lane to use the corresponding PLL" "PLL2,PLL1"
bitfld.long 0x00 24.--25. "TRAT_SEL,Transmitter speed selection for lane $2" "FRATE_SEL,FRATE_SEL/2,FRATE_SEL/4,FRATE_SEL*2"
newline
bitfld.long 0x00 22. "RRST_B,Resets receiver for lane $2" "Reset,Application"
bitfld.long 0x00 21. "TRST_B,Resets transmitter for lane $2" "Reset,Application"
newline
bitfld.long 0x00 20. "RX_PD,Lane powerdown for receiver on lane $2" "Active,Powered down"
bitfld.long 0x00 19. "TX_PD,Lane powerdown for transmitter on lane $2" "Active,Powered down"
newline
bitfld.long 0x00 18. "IF20BIT_EN,20-bit interface enable" "10-bit,20-bit"
bitfld.long 0x00 16. "FIRST_LANE,Indicates this lane is the first of a group of lanes" "Not first,First"
newline
bitfld.long 0x00 7.--11. "PROTS,Lane protocol select" "PCIe,SGMII,SATA,,,,,,,,SXGMII,?..."
line.long 0x04 "LN$2GCR1,General Control Register 1 - Lane $2"
bitfld.long 0x04 31. "RDAT_INV,Invert RX data" "Not inverted,Inverted"
bitfld.long 0x04 30. "TDAT_INV,Invert TX data" "Not inverted,Inverted"
newline
bitfld.long 0x04 26. "OPAD_CTL,TX output pad control signal for common mode" "TX enabled,Common mode"
bitfld.long 0x04 20.--22. "REIDL_TH,Receiver electrical idle detection threshold control" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x04 18.--19. "REIDL_EX_SEL,Exit electrical idle filter select" "0,1,2,3"
bitfld.long 0x04 16.--17. "REIDL_ET_SEL,Enter idle filter select" "0,1,2,3"
newline
bitfld.long 0x04 15. "REIDL_EX_MSB,Exit idle filter select MSB" "0,1"
bitfld.long 0x04 14. "REIDL_ET_MSB,Enter idle filter select MSB" "0,1"
newline
bitfld.long 0x04 13. "REQ_CTL_SNP,Initiate snapshot of RX equalization control gaink2/3 and offset registers" "Not initiated,Initiated"
bitfld.long 0x04 12. "REQ_CDR_SNP,Initiate snapshot of RX CDR registers" "Not initiated,Initiated"
newline
bitfld.long 0x04 7. "TRSTDIR,Multi-lane protocol TX clock synchronization control" "Low,High"
bitfld.long 0x04 6. "REQ_BIN_SNP,Initiate snapshot of RX equalization control binning registers" "Not initiated,Initiated"
newline
bitfld.long 0x04 4.--5. "ISLEW_RCTL,Slew control for quadrature generator" "0,1,2,3"
bitfld.long 0x04 0.--1. "OSLEW_RCTL,Phase interpolator output clock edge rate control" "0,1,2,3"
group.long ($1+0x0C)++0x07
line.long 0x00 "LN$2SSCR0,Speed Switch Control Register 0 - Lane $2"
bitfld.long 0x00 29.--31. "REIDL_TH_0,Receiver electrical idle detection threshold control" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 27.--28. "REIDL_EX_SEL_0,Exit electrical idle filter select" "0,1,2,3"
newline
bitfld.long 0x00 25.--26. "REIDL_ET_SEL_0,Enter idle filter select" "0,1,2,3"
bitfld.long 0x00 24. "REIDL_EX_MSB_0,Exit idle filter select MSB" "Low,High"
newline
bitfld.long 0x00 23. "REIDL_ET_MSB_0,Enter idle filter select MSB" "Low,High"
bitfld.long 0x00 21.--22. "ISLEW_RTCL_0,Slew control for quadrature generator" "0,1,2,3"
newline
bitfld.long 0x00 19.--20. "OSLEW_RCTL_0,Phase interpolator output clock edge rate control" "0,1,2,3"
bitfld.long 0x00 18. "RXEQ_BST_0,RX equalization boost" "Low,High"
newline
bitfld.long 0x00 16.--17. "BASE_WAND_0,Baseline wander control select" "Off,BinBLW threshold,BinBLW sign,RX Eq offset"
bitfld.long 0x00 15. "OSETOVD6_0,Binary decode of lane adaptive equalization offset initialization or override value" "0,1"
newline
bitfld.long 0x00 13.--14. "TEQ_TYPE_0,Lane transmit equalization" "No equalization,2 levels,3 levels,?..."
bitfld.long 0x00 12. "SGN_PREQ_0,Precursor sign" "Negative,Positive"
newline
bitfld.long 0x00 11. "SGN_POST1Q_0,Post1q sign" "Negative,Positive"
bitfld.long 0x00 6.--10. "RATIO_PST1Q_0,Ratio of full swing transition bit to first post-cursor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x00 0.--5. "AMP_RED_0,Overall TX amplitude reduction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,?..."
line.long 0x04 "LN$2RECR0,Receive Equalization Control Register 0"
bitfld.long 0x04 28. "RXEQ_BST,RX equalization boost" "Low,High"
bitfld.long 0x04 24.--27. "GK2OVD,Binary decode of lane adaptive equalization gaink2 initialization or override value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x04 16.--19. "GK3OVD,Binary decode of lane adaptive equalization gaink3 initialization or override value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 15. "GK2OVD_EN,Controls source of RX equalization gaink2 setting" "Used RXEQ,Fixed gaink2"
newline
bitfld.long 0x04 14. "GK3OVD_EN,Controls source of RX equalization gaink3 setting" "Used RXEQ,Fixed gaink3"
bitfld.long 0x04 13. "OSETOVD_EN,Controls source of RX equalization offset" "Adjusted,Fixed"
newline
bitfld.long 0x04 10.--11. "BASE_WAND,Baseline wander control select" "Off,Default threshold,Alternate sign,Use OSETOVD"
hexmask.long.byte 0x04 0.--6. 0x01 "OSETOVD,Binary decode of lane adaptive equalization offset"
rgroup.long ($1+0x14)++0x03
line.long 0x00 "LN$2RECR1,Receive Equalization Control Register 1 - Lane $2"
bitfld.long 0x00 2. "EQ_BSNP_DN,Snapshot of RX EQ bin complete" "Not completed,Completed"
bitfld.long 0x00 1. "EQ_CSNP_DN,Snapshot o RX EQ ctrl Complete" "Not completed,Completed"
newline
bitfld.long 0x00 0. "CDR_SNP_DN,Snapshot of CDR loop complete" "Not completed,Completed"
group.long ($1+0x18)++0x0B
line.long 0x00 "LN$2TECR0,Transmit Equalization Control Register 0 - Lane $2"
bitfld.long 0x00 28.--29. "TEQ_TYPE,Selects amount/type of transmit equalization" "No equalization,2 levels,3 levels,?..."
bitfld.long 0x00 26. "SGN_PREQ,Precursor sign" "Negative,Positive"
newline
bitfld.long 0x00 22.--25. "RATIO_PREQ,Ratio of full swing transition bit to pre-cursor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 21. "SGN_POST1Q,Port q sign" "Negative,Positive"
newline
bitfld.long 0x00 16.--20. "RATIO_PST1Q,Ratio of full swing transition bit to first port-cursor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 8.--13. "ADPT_EQ,Transmitter adjustments for 8G/10G" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x00 0.--5. "AMP_RED,Overall TX amplitude reduction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x04 "LN$2SSCR1,Speed Switch Control Register 1 - Lane $2"
bitfld.long 0x04 29.--31. "REIDL_TH_1,Receiver electrical idle detection threshold control" "0,1,2,3,4,5,6,7"
bitfld.long 0x04 27.--28. "REIDL_EX_SEL_1,Exit electrical idle filter select" "0,1,2,3"
newline
bitfld.long 0x04 25.--26. "REIDL_ET_SEL_1,Enter idle filter select" "0,1,2,3"
bitfld.long 0x04 24. "REIDL_EX_MSB_1,Exit idle filter select MSB" "Low,High"
newline
bitfld.long 0x04 23. "REIDL_ET_MSB_1,Enter idle filter select MSB" "Low,High"
bitfld.long 0x04 21.--22. "ISLEW_RTCL_1,Slew control for quadrature generator" "0,1,2,3"
newline
bitfld.long 0x04 19.--20. "OSLEW_RCTL_1,Phase interpolator output clock edge rate control" "0,1,2,3"
bitfld.long 0x04 18. "RXEQ_BST_1,RX equalization boost" "Low,High"
newline
bitfld.long 0x04 16.--17. "BASE_WAND_1,Baseline wander control select" "Off,BinBLW threshold,BinBLW sign,RX Eq offset"
bitfld.long 0x04 15. "OSETOVD6_1,Binary decode of lane adaptive equalization offset initialization or override value" "0,1"
newline
bitfld.long 0x04 13.--14. "TEQ_TYPE_1,Lane transmit equalization" "No equalization,2 levels,3 levels,?..."
bitfld.long 0x04 12. "SGN_PREQ_1,Precursor sign" "Negative,Positive"
newline
bitfld.long 0x04 11. "SGN_POST1Q_1,Post1q sign" "Negative,Positive"
bitfld.long 0x04 6.--10. "RATIO_PST1Q_1,Ratio of full swing transition bit to first post-cursor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x04 0.--5. "AMP_RED_1,Overall TX amplitude reduction" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,?..."
line.long 0x08 "LN$2TTLCR0,TTL Control Register 0 - Lane $2"
bitfld.long 0x08 24.--29. "FLT_SEL,Selects the gain in the CDR loop for the lane" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
group.long ($1+0x3C)++0x03
line.long 0x00 "LN$2TCSR3,Test Control/Status Register 3"
bitfld.long 0x00 28.--29. "LPBK_EN,Loopback data from TX to RX" "Application,Loopback,?..."
rbitfld.long 0x00 27. "CDR_LCK,CDR acquired a valid RX clock" "Not valid,Valid"
repeat.end
repeat 2. (increment 0x1000 0x40)(strings "A" "B")
group.long $1++0x03
line.long 0x00 "PEX$2CR0,PEX$2 Protocol Control Register 0"
bitfld.long 0x00 27. "RD_SW,Reduced swing operation for 8 GT/s" "Full,Reduced"
repeat.end
repeat 4. (increment 0x1804 0x10)(strings "A" "B" "C" "D")
group.long $1++0x03
line.long 0x00 "SGMII$2CR1,SGMII$2 Protocol Control Register 1"
hexmask.long.byte 0x00 27.--31. 0x08 "MDEV_PORT,MDIO bus port address"
bitfld.long 0x00 11. "SGPCS_EN,SGMII PCS enable" "Disabled,Enabled"
rgroup.long ($1+0x08)++0x03
line.long 0x00 "SGMII$2CR3,SGMII$2 Protocol Control Register 3"
bitfld.long 0x00 31. "TX_QU,TX quiet LPI state" "Low,High"
bitfld.long 0x00 30. "TX_ACT,TX active LPI state" "Low,High"
newline
bitfld.long 0x00 27. "RX_QU,RX quiet LPI state" "Low,High"
bitfld.long 0x00 26. "RX_ACT,RX active LPI state" "Low,High"
newline
bitfld.long 0x00 23. "WK_ERR,Error on LPI wake" "Low,High"
repeat.end
group.long 0x1884++0x03
line.long 0x00 "QSGMIIACR1,QSGMIIA Protocol Control Register 1"
bitfld.long 0x00 29.--31. "MDEV_PORT,Device port ID" "0,1,2,3,4,5,6,7"
rgroup.long 0x188C++0x03
line.long 0x00 "QSGMIIACR3,QSGMIIA Protocol Control Register 3"
bitfld.long 0x00 19. "WK_ERR0,Port 0 error on LPI wake" "No error,Error"
bitfld.long 0x00 18. "WK_ERR1,Port 1 error on LPI wake" "No error,Error"
newline
bitfld.long 0x00 17. "WK_ERR2,Port 2 error on LPI wake" "No error,Error"
bitfld.long 0x00 16. "WK_ERR3,Port 3 error on LPI wake" "No error,Error"
newline
bitfld.long 0x00 15. "RX_QU0,Port 0 RX quiet LPI state" "Not quiet,Quiet"
bitfld.long 0x00 14. "RX_QU1,Port 1 RX quiet LPI state" "Not quiet,Quiet"
newline
bitfld.long 0x00 13. "RX_QU2,Port 2 RX quiet LPI state" "Not quiet,Quiet"
bitfld.long 0x00 12. "RX_QU3,Port 3 RX quiet LPI state" "Not quiet,Quiet"
newline
bitfld.long 0x00 11. "RX_ACT0,Port 0 RX active LPI state" "Not active,Active"
bitfld.long 0x00 10. "RX_ACT1,Port 1 RX active LPI state" "Not active,Active"
newline
bitfld.long 0x00 9. "RX_ACT2,Port 2 RX active LPI state" "Not active,Active"
bitfld.long 0x00 8. "RX_ACT3,Port 3 RX active LPI state" "Not active,Active"
newline
bitfld.long 0x00 7. "TX_QU0,Port 0 TX quiet LPI state" "Not quiet,Quiet"
bitfld.long 0x00 6. "TX_QU1,Port 1 TX quiet LPI state" "Not quiet,Quiet"
newline
bitfld.long 0x00 5. "TX_QU2,Port 2 TX quiet LPI state" "Not quiet,Quiet"
bitfld.long 0x00 4. "TX_QU3,Port 3 TX quiet LPI state" "Not quiet,Quiet"
newline
bitfld.long 0x00 3. "TX_ACT0,Port 0 TX active LPI state" "Not active,Active"
bitfld.long 0x00 2. "TX_ACT1,Port 1 TX active LPI state" "Not active,Active"
newline
bitfld.long 0x00 1. "TX_ACT2,Port 2 TX active LPI state" "Not active,Active"
bitfld.long 0x00 0. "TX_ACT3,Port 3 TX active LPI state" "Not active,Active"
group.long 0x1A84++0x07
line.long 0x00 "SXGMIIACR1,SXGMIIA Protocol Control Register 1"
bitfld.long 0x00 29.--31. "MDEV_PORT,Device port ID" "0,1,2,3,4,5,6,7"
line.long 0x04 "SXGMIIACR2,SXGMIIA Protocol Control Register 2"
bitfld.long 0x04 24. "USX_FORCE_SPD,Force USXGMII speed" "Auto-negotiated,USX_SPD_TX/RX"
hexmask.long.word 0x04 12.--21. 1. "USX_SPD_TX,TX speed value for SXGMII"
newline
hexmask.long.word 0x04 0.--9. 1. "USX_SPD_RX,RX speed value for 5G and 10G SXGMII"
rgroup.long 0x1A8C++0x03
line.long 0x00 "SXGMIIACR3,SXGMIIA Protocol Control Register 3"
bitfld.long 0x00 28.--29. "TX_LPI_MD,TX LPI mode" "DATA,QUIET,ALERT,?..."
bitfld.long 0x00 24.--26. "TX_LPI_ST,TX LPI state" "TX_ACTIVE,TX_SLEEP,TX_QUIET,TX_ALERT,TX_WAKE,TX_WAKE2,TX_SCR_BYPASS,?..."
newline
bitfld.long 0x00 20. "RX_LPI_MD,RX LPI mode" "DATA,QUIET"
bitfld.long 0x00 19. "RX_LPI_ST,RX LPI active" "Not active,Active"
newline
bitfld.long 0x00 16.--18. "RX_LPI_ST,RX LPI state" "RX_ACTIVE,RX_TIMER,RX_SLEEP,RX_FW,RX_QUIET,RX_WAKE,RX_WTF,RX_LINK_FAIL"
bitfld.long 0x00 7. "BLOCK_LK,Block lock" "Not locked,Locked"
newline
bitfld.long 0x00 5. "HI_BER,High bit-error-rate indicator" "Low,High"
bitfld.long 0x00 2. "LINK_ST,Link status" "Not up,Up"
newline
bitfld.long 0x00 1. "AN_PABIL_DN,AN partner ability done" "Not done,Done"
bitfld.long 0x00 0. "AN_BUSY,AN busy" "Not busy,Busy"
group.long 0x1B04++0x0B
line.long 0x00 "QXGMIIACR1,QXGMIIA Protocol Control Register 1"
hexmask.long.byte 0x00 29.--31. 0x20 "MDEV_PORT,MDIO bus port address"
line.long 0x04 "QXGMIIACR2,QXGMIIA Protocol Control Register 2"
bitfld.long 0x04 24. "USX_FORCE_SPD,Force USXGMII speed" "Auto-negotiated,USXGMII"
bitfld.long 0x04 23. "USX_SPD_TX_2P5,TX speed value for QXGMII" "USX_SPD_TX,1G"
newline
hexmask.long.word 0x04 12.--21. 1. "USX_SPD_TX,TX speed value for QXGMII"
bitfld.long 0x04 11. "USX_SPD_RX_2P5,RX speed value for QXGMII" "USX_SPD_RX,1G"
newline
hexmask.long.word 0x04 0.--9. 1. "USX_SPD_RX,RX speed value for QXGMII"
line.long 0x08 "QXGMIIACR3,QXGMIIA Protocol Control Register 3"
bitfld.long 0x08 15. "USXM_IND_CLR,USXGMII mux indicator clear" "Not cleared,Cleared"
rbitfld.long 0x08 11. "USXM_ERR_IND,USXGMII mux error indicator" "No error,Error"
newline
rbitfld.long 0x08 10. "USXM_ACTIVE,USXGMII mux active" "Not active,Active"
rbitfld.long 0x08 8. "GB_BLOBK_LK,Gearbox block lock" "Not locked,Locked"
newline
rbitfld.long 0x08 7. "USXM_ALIGN_LK,Align lock" "Not locked,Locked"
repeat 4. (increment 0x1B10 0x04)(increment 4. 1.)
rgroup.long $1++0x03
line.long 0x00 "QXGMIIACR$2,QXGMIIA Protocol Control Register $2"
bitfld.long 0x00 28.--29. "TX_LPI_MD,TX LPI mode" "DATA,QUIET,ALERT,?..."
bitfld.long 0x00 24.--26. "TX_LPI_ST,TX LPI state" "TX_ACTIVE,TX_SLEEP,TX_QUIET,TX_ALERT,TX_WAKE,TX_WAKE2,TX_SCR_BYPASS,?..."
newline
bitfld.long 0x00 20. "RX_LPI_MD,RX LPI mode" "DATA,QUIET"
bitfld.long 0x00 19. "RX_LPI_ACT,RX LPI active" "Not active,Active"
newline
bitfld.long 0x00 16.--18. "RX_LPI_ST,RX LPI state" "RX_ACTIVE,RX_TIMER,RX_SLEEP,RX_FW,RX_QUIET,RX_WAKE,RX_WTF,RX_LINK_FAIL"
bitfld.long 0x00 7. "BLOCK_LK,Block lock" "Not locked,Locked"
newline
bitfld.long 0x00 5. "HI_BER,High bit-error-rate indicator" "Low,High"
bitfld.long 0x00 2. "LINK_ST,Link status" "Not up,Up"
newline
bitfld.long 0x00 1. "AN_PABIL_DN,AN partner ability done" "Not done,Done"
bitfld.long 0x00 0. "AN_BUSY,AN busy" "Not busy,Busy"
repeat.end
tree.end
; tree "MDIO Registers"
; base ad:0x00
; %include ls1028a/mdio.ph ad:0x00
; tree.end
tree.end
tree "SPI (Serial Peripheral Interface)"
tree "SPI1"
base ad:0x02100000
if (((per.l(ad:0x02100000))&0x4000)==0x00)
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MSTR,Master/slave mode select" "Slave,Master"
bitfld.long 0x00 30. "CONT_SCKE,Continuous SCK enable" "Disabled,Enabled"
rbitfld.long 0x00 28.--29. "DCONF,SPI configuration" "SPI,?..."
bitfld.long 0x00 27. "FRZ,Freeze enable" "Not halted,Halted"
newline
bitfld.long 0x00 24. "ROOE,Receive FIFO overflow overwrite enable" "Ignored,Shifted"
bitfld.long 0x00 19. "PCSIS[3],Peripheral chip select 3 inactive state" "Low,High"
bitfld.long 0x00 18. "[2],Peripheral chip select 2 inactive state" "Low,High"
bitfld.long 0x00 17. "[1],Peripheral chip select 1 inactive state" "Low,High"
newline
bitfld.long 0x00 16. "[0],Peripheral chip select 0 inactive state" "Low,High"
bitfld.long 0x00 14. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 13. "DIS_TXF,Disable transmit FIFO" "No,Yes"
bitfld.long 0x00 12. "DIS_RXF,Disable receive FIFO" "No,Yes"
newline
bitfld.long 0x00 11. "CLR_TXF,Clear TX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 10. "CLR_RXF,Clear RX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 3. "XSPI,Extended SPI mode" "Normal,Extended"
bitfld.long 0x00 2. "FCPCS,Fast continuous PCS mode" "Normal/Slow continuous,Fast continuous"
newline
bitfld.long 0x00 1. "PES,Parity error stop" "Continued,Stopped"
bitfld.long 0x00 0. "HALT,Halt" "Start,Stop"
else
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MSTR,Master/slave mode select" "Slave,Master"
bitfld.long 0x00 30. "CONT_SCKE,Continuous SCK enable" "Disabled,Enabled"
rbitfld.long 0x00 28.--29. "DCONF,SPI configuration" "SPI,?..."
bitfld.long 0x00 27. "FRZ,Freeze enable" "Not halted,Halted"
newline
bitfld.long 0x00 24. "ROOE,Receive FIFO overflow overwrite enable" "Ignored,Shifted"
bitfld.long 0x00 19. "PCSIS[3],Peripheral chip select 3 inactive state" "Low,High"
bitfld.long 0x00 18. "[2],Peripheral chip select 2 inactive state" "Low,High"
bitfld.long 0x00 17. "[1],Peripheral chip select 1 inactive state" "Low,High"
newline
bitfld.long 0x00 16. "[0],Peripheral chip select 0 inactive state" "Low,High"
bitfld.long 0x00 14. "MDIS,Module disable" "No,Yes"
rbitfld.long 0x00 13. "DIS_TXF,Disable transmit FIFO" "No,Yes"
rbitfld.long 0x00 12. "DIS_RXF,Disable receive FIFO" "No,Yes"
newline
bitfld.long 0x00 11. "CLR_TXF,Clear TX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 10. "CLR_RXF,Clear RX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 3. "XSPI,Extended SPI mode" "Normal,Extended"
bitfld.long 0x00 2. "FCPCS,Fast continuous PCS mode" "Normal/Slow continuous,Fast continuous"
newline
bitfld.long 0x00 1. "PES,Parity error stop" "Continued,Stopped"
bitfld.long 0x00 0. "HALT,Halt" "Start,Stop"
endif
if (((per.l(ad:0x02100000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0x08++0x03
line.long 0x00 "TCR,Transfer Count Register"
hexmask.long.word 0x00 16.--31. 1. "SPI_TCNT,SPI transfer counter"
else
group.long 0x08++0x03
line.long 0x00 "TCR,Transfer Count Register"
hexmask.long.word 0x00 16.--31. 1. "SPI_TCNT,SPI transfer counter"
endif
if (((per.l(ad:0x02100000))&0x80000000)==0x80000000)
if (((per.l(ad:0x02100000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0xC++0x03
line.long 0x00 "CTAR0,Clock And Transfer Attributes Register 0"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
else
group.long 0xC++0x03
line.long 0x00 "CTAR0,Clock And Transfer Attributes Register 0"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
endif
else
group.long 0xC++0x03
line.long 0x00 "CTAR0_SLAVE,Clock And Transfer Attributes Register 0"
bitfld.long 0x00 27.--31. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits,32 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
bitfld.long 0x00 24. "PE,Parity enable" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "PP,Parity polarity" "Even,Odd"
endif
if (((per.l(ad:0x02100000))&0x80000000)==0x80000000)
if (((per.l(ad:0x02100000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0x10++0x03
line.long 0x00 "CTAR1,Clock And Transfer Attributes Register 1"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
else
group.long 0x10++0x03
line.long 0x00 "CTAR1,Clock And Transfer Attributes Register 1"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
endif
else
endif
if (((per.l(ad:0x02100000))&0x08)==0x08)
group.long 0x2C++0x03
line.long 0x00 "SR,Status Register"
eventfld.long 0x00 31. "TCF,Transfer complete flag" "Not completed,Completed"
rbitfld.long 0x00 30. "TXRXS,TX and RX status" "Stopped,Running"
eventfld.long 0x00 28. "EOQF,End of queue flag" "Not set,Set"
eventfld.long 0x00 27. "TFUF,Transmit FIFO underflow flag" "No underflow,Underflow"
newline
eventfld.long 0x00 25. "TFFF,Transmit FIFO fill flag" "Full,Not full"
rbitfld.long 0x00 24. "BSYF,Busy flag" "Idle,In progress"
eventfld.long 0x00 23. "CMDTCF,Command transfer complete flag" "Not completed,Completed"
eventfld.long 0x00 21. "SPEF,SPI parity error flag" "No error,Error"
newline
eventfld.long 0x00 19. "RFOF,Receive FIFO overflow flag" "No overflow,Overflow"
eventfld.long 0x00 18. "TFIWF,Transmit FIFO invalid write flag" "No invalid data,Invalid data"
rbitfld.long 0x00 17. "RFDF,Receive FIFO drain flag" "Empty,Not empty"
rbitfld.long 0x00 12.--15. "TXCTR,TX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 8.--11. "TXNXTPTR,Transmit next pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 4.--7. "RXCTR,RX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 0.--3. "POPNXTPTR,Pointer to the RX FIFO entry to be returned when the POPR is read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
group.long 0x2C++0x03
line.long 0x00 "SR,Status Register"
eventfld.long 0x00 31. "TCF,Transfer complete flag" "Not completed,Completed"
rbitfld.long 0x00 30. "TXRXS,TX and RX status" "Stopped,Running"
eventfld.long 0x00 28. "EOQF,End of queue flag" "Not set,Set"
eventfld.long 0x00 27. "TFUF,Transmit FIFO underflow flag" "No underflow,Underflow"
newline
eventfld.long 0x00 25. "TFFF,Transmit FIFO fill flag" "Full,Not full"
eventfld.long 0x00 23. "CMDTCF,Command transfer complete flag" "Not completed,Completed"
eventfld.long 0x00 21. "SPEF,SPI parity error flag" "No error,Error"
eventfld.long 0x00 19. "RFOF,Receive FIFO overflow flag" "No overflow,Overflow"
newline
eventfld.long 0x00 18. "TFIWF,Transmit FIFO invalid write flag" "No invalid data,Invalid data"
rbitfld.long 0x00 17. "RFDF,Receive FIFO drain flag" "Empty,Not empty"
rbitfld.long 0x00 12.--15. "TXCTR,TX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 8.--11. "TXNXTPTR,Transmit next pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 4.--7. "RXCTR,RX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 0.--3. "POPNXTPTR,Pointer to the RX FIFO entry to be returned when the POPR is read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
endif
if (((per.l(ad:0x02100000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0x30++0x03
line.long 0x00 "RSER,DMA/Interrupt Request Select And Enable Register"
bitfld.long 0x00 31. "TCF_RE,Transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CMDFFF_RE,Command FIFO fill flag request enable" "Disabled,Enabled"
bitfld.long 0x00 28. "EOQF_RE,Finished request enable" "Disabled,Enabled"
bitfld.long 0x00 27. "TFUF_RE,Transmit FIFO underflow request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "TFFF_RE,Transmit FIFO fill request enable" "Disabled,Enabled"
bitfld.long 0x00 24. "TFFF_DIRS,Transmit FIFO fill DMA or interrupt request select" "Interrupt,DMA"
bitfld.long 0x00 23. "CMDTCF_RE,Command transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 21. "SPEF_RE,SPI parity error request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "RFOF_RE,Receive FIFO overflow request enable" "Disabled,Enabled"
bitfld.long 0x00 18. "TFIWF_RE,Transmit FIFO invalid write request enable" "Disabled,Enabled"
bitfld.long 0x00 17. "RFDF_RE,Receive FIFO drain request enable" "Disabled,Enabled"
bitfld.long 0x00 16. "RFDF_DIRS,Receive FIFO drain DMA or interrupt request select" "Interrupt,DMA"
newline
bitfld.long 0x00 15. "CMDFFF_DIRS,Command FIFO fill DMA or interrupt request select" "Interrupt,DMA"
else
group.long 0x30++0x03
line.long 0x00 "RSER,DMA/Interrupt Request Select And Enable Register"
bitfld.long 0x00 31. "TCF_RE,Transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CMDFFF_RE,Command FIFO fill flag request enable" "Disabled,Enabled"
bitfld.long 0x00 28. "EOQF_RE,Finished request enable" "Disabled,Enabled"
bitfld.long 0x00 27. "TFUF_RE,Transmit FIFO underflow request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "TFFF_RE,Transmit FIFO fill request enable" "Disabled,Enabled"
bitfld.long 0x00 24. "TFFF_DIRS,Transmit FIFO fill DMA or interrupt request select" "Interrupt,DMA"
bitfld.long 0x00 23. "CMDTCF_RE,Command transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 21. "SPEF_RE,SPI parity error request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "RFOF_RE,Receive FIFO overflow request enable" "Disabled,Enabled"
bitfld.long 0x00 18. "TFIWF_RE,Transmit FIFO invalid write request enable" "Disabled,Enabled"
bitfld.long 0x00 17. "RFDF_RE,Receive FIFO drain request enable" "Disabled,Enabled"
bitfld.long 0x00 16. "RFDF_DIRS,Receive FIFO drain DMA or interrupt request select" "Interrupt,DMA"
newline
bitfld.long 0x00 15. "CMDFFF_DIRS,Command FIFO fill DMA or interrupt request select" "Interrupt,DMA"
endif
if (((per.l(ad:0x02100000))&0x80000000)==0x80000000)
if (((per.l(ad:0x02100000))&0x04)==0x04)
group.long 0x34++0x03
line.long 0x00 "PUSHR,PUSH TX FIFO Register In Master Mode"
bitfld.long 0x00 31. "CONT,Continuous peripheral chip select enable" "Disabled,Enabled"
bitfld.long 0x00 28.--30. "CTAS,Clock and transfer attributes select" "CTAR0,CTAR1,?..."
bitfld.long 0x00 27. "EOQ,End of queue" "Not the last,Last"
bitfld.long 0x00 26. "CTCNT,Clear transfer counter" "Not cleared,Cleared"
newline
bitfld.long 0x00 25. "MASC,After-SCK delay masked" "Not masked,Masked"
bitfld.long 0x00 24. "MSCS,PCS to SCK delay masked" "Not masked,Masked"
bitfld.long 0x00 19. "PCS[3],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 18. "[2],Assert PCS for the transfer" "Negate,Assert"
newline
bitfld.long 0x00 17. "[1],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 16. "[0],Assert PCS for the transfer" "Negate,Assert"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
else
group.long 0x34++0x03
line.long 0x00 "PUSHR,PUSH TX FIFO Register In Master Mode"
bitfld.long 0x00 31. "CONT,Continuous peripheral chip select enable" "Disabled,Enabled"
bitfld.long 0x00 28.--30. "CTAS,Clock and transfer attributes select" "CTAR0,CTAR1,CTAR2,?..."
bitfld.long 0x00 27. "EOQ,End of queue" "Not the last,Last"
bitfld.long 0x00 26. "CTCNT,Clear transfer counter" "Not cleared,Cleared"
newline
bitfld.long 0x00 25. "PE,Parity enable" "Disabled,Enabled"
bitfld.long 0x00 24. "PP,Parity polarity" "Even,Odd"
bitfld.long 0x00 19. "PCS[3],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 18. "[2],Assert PCS for the transfer" "Negate,Assert"
newline
bitfld.long 0x00 17. "[1],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 16. "[0],Assert PCS for the transfer" "Negate,Assert"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
endif
else
group.long 0x34++0x03
line.long 0x00 "PUSHR_SLAVE,PUSH TX FIFO Register In Slave Mode"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
endif
hgroup.long 0x38++0x03
hide.long 0x00 "POPR,POP RX FIFO Register"
in
newline
repeat 4. (increment 0x3C 0x04)(increment 0. 1.)
if (((per.l(ad:0x02100000))&0x08)==0x00)
if (((per.l(ad:0x02100000))&0x80000000)==0x80000000)
rgroup.long $1++0x03
line.long 0x00 "TXFR$2,Transmit FIFO Register $2"
hexmask.long.word 0x00 16.--31. 1. "TXCMD,Transmit command"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
else
rgroup.long $1++0x03
line.long 0x00 "TXFR$2,Transmit FIFO Register $2"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
endif
else
hgroup.long $1++0x03
hide.long 0x00 "TXFR$2,Transmit FIFO Register $2"
endif
repeat.end
newline
repeat 4. (increment 0x7C 0x04)(increment 0. 1.)
hgroup.long $1++0x03
hide.long 0x00 "RXFR$2,Receive FIFO Register $2"
in
newline
repeat.end
repeat 2. (increment 0x11C 0x04)(increment 0. 1.)
if (((per.l(ad:0x02100000))&0x08)==0x08)
group.long $1++0x03
line.long 0x00 "CTARE$2,Clock And Transfer Attributes Register Extended $2"
bitfld.long 0x00 16. "FMSZE,Frame size extended" "16b,32b"
hexmask.long.word 0x00 0.--10. 1. "DTCP,Data transfer count preload"
else
hgroup.long $1++0x03
hide.long 0x00 "CTARE$2,Clock And Transfer Attributes Register Extended $2"
endif
repeat.end
rgroup.long 0x13C++0x03
line.long 0x00 "SREX,Status Register Extended"
bitfld.long 0x00 14. "TXCTR4,TX FIFO counter[4]" "0,1"
bitfld.long 0x00 11. "RXCTR4,RX FIFO counter[4]" "0,1"
bitfld.long 0x00 4.--8. "CMDCTR,CMD FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--3. "CMDNXTPTR,Command next pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree "SPI2"
base ad:0x02110000
if (((per.l(ad:0x02110000))&0x4000)==0x00)
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MSTR,Master/slave mode select" "Slave,Master"
bitfld.long 0x00 30. "CONT_SCKE,Continuous SCK enable" "Disabled,Enabled"
rbitfld.long 0x00 28.--29. "DCONF,SPI configuration" "SPI,?..."
bitfld.long 0x00 27. "FRZ,Freeze enable" "Not halted,Halted"
newline
bitfld.long 0x00 24. "ROOE,Receive FIFO overflow overwrite enable" "Ignored,Shifted"
bitfld.long 0x00 19. "PCSIS[3],Peripheral chip select 3 inactive state" "Low,High"
bitfld.long 0x00 18. "[2],Peripheral chip select 2 inactive state" "Low,High"
bitfld.long 0x00 17. "[1],Peripheral chip select 1 inactive state" "Low,High"
newline
bitfld.long 0x00 16. "[0],Peripheral chip select 0 inactive state" "Low,High"
bitfld.long 0x00 14. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 13. "DIS_TXF,Disable transmit FIFO" "No,Yes"
bitfld.long 0x00 12. "DIS_RXF,Disable receive FIFO" "No,Yes"
newline
bitfld.long 0x00 11. "CLR_TXF,Clear TX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 10. "CLR_RXF,Clear RX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 3. "XSPI,Extended SPI mode" "Normal,Extended"
bitfld.long 0x00 2. "FCPCS,Fast continuous PCS mode" "Normal/Slow continuous,Fast continuous"
newline
bitfld.long 0x00 1. "PES,Parity error stop" "Continued,Stopped"
bitfld.long 0x00 0. "HALT,Halt" "Start,Stop"
else
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MSTR,Master/slave mode select" "Slave,Master"
bitfld.long 0x00 30. "CONT_SCKE,Continuous SCK enable" "Disabled,Enabled"
rbitfld.long 0x00 28.--29. "DCONF,SPI configuration" "SPI,?..."
bitfld.long 0x00 27. "FRZ,Freeze enable" "Not halted,Halted"
newline
bitfld.long 0x00 24. "ROOE,Receive FIFO overflow overwrite enable" "Ignored,Shifted"
bitfld.long 0x00 19. "PCSIS[3],Peripheral chip select 3 inactive state" "Low,High"
bitfld.long 0x00 18. "[2],Peripheral chip select 2 inactive state" "Low,High"
bitfld.long 0x00 17. "[1],Peripheral chip select 1 inactive state" "Low,High"
newline
bitfld.long 0x00 16. "[0],Peripheral chip select 0 inactive state" "Low,High"
bitfld.long 0x00 14. "MDIS,Module disable" "No,Yes"
rbitfld.long 0x00 13. "DIS_TXF,Disable transmit FIFO" "No,Yes"
rbitfld.long 0x00 12. "DIS_RXF,Disable receive FIFO" "No,Yes"
newline
bitfld.long 0x00 11. "CLR_TXF,Clear TX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 10. "CLR_RXF,Clear RX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 3. "XSPI,Extended SPI mode" "Normal,Extended"
bitfld.long 0x00 2. "FCPCS,Fast continuous PCS mode" "Normal/Slow continuous,Fast continuous"
newline
bitfld.long 0x00 1. "PES,Parity error stop" "Continued,Stopped"
bitfld.long 0x00 0. "HALT,Halt" "Start,Stop"
endif
if (((per.l(ad:0x02110000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0x08++0x03
line.long 0x00 "TCR,Transfer Count Register"
hexmask.long.word 0x00 16.--31. 1. "SPI_TCNT,SPI transfer counter"
else
group.long 0x08++0x03
line.long 0x00 "TCR,Transfer Count Register"
hexmask.long.word 0x00 16.--31. 1. "SPI_TCNT,SPI transfer counter"
endif
if (((per.l(ad:0x02110000))&0x80000000)==0x80000000)
if (((per.l(ad:0x02110000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0xC++0x03
line.long 0x00 "CTAR0,Clock And Transfer Attributes Register 0"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
else
group.long 0xC++0x03
line.long 0x00 "CTAR0,Clock And Transfer Attributes Register 0"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
endif
else
group.long 0xC++0x03
line.long 0x00 "CTAR0_SLAVE,Clock And Transfer Attributes Register 0"
bitfld.long 0x00 27.--31. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits,32 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
bitfld.long 0x00 24. "PE,Parity enable" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "PP,Parity polarity" "Even,Odd"
endif
if (((per.l(ad:0x02110000))&0x80000000)==0x80000000)
if (((per.l(ad:0x02110000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0x10++0x03
line.long 0x00 "CTAR1,Clock And Transfer Attributes Register 1"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
else
group.long 0x10++0x03
line.long 0x00 "CTAR1,Clock And Transfer Attributes Register 1"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
endif
else
endif
if (((per.l(ad:0x02110000))&0x08)==0x08)
group.long 0x2C++0x03
line.long 0x00 "SR,Status Register"
eventfld.long 0x00 31. "TCF,Transfer complete flag" "Not completed,Completed"
rbitfld.long 0x00 30. "TXRXS,TX and RX status" "Stopped,Running"
eventfld.long 0x00 28. "EOQF,End of queue flag" "Not set,Set"
eventfld.long 0x00 27. "TFUF,Transmit FIFO underflow flag" "No underflow,Underflow"
newline
eventfld.long 0x00 25. "TFFF,Transmit FIFO fill flag" "Full,Not full"
rbitfld.long 0x00 24. "BSYF,Busy flag" "Idle,In progress"
eventfld.long 0x00 23. "CMDTCF,Command transfer complete flag" "Not completed,Completed"
eventfld.long 0x00 21. "SPEF,SPI parity error flag" "No error,Error"
newline
eventfld.long 0x00 19. "RFOF,Receive FIFO overflow flag" "No overflow,Overflow"
eventfld.long 0x00 18. "TFIWF,Transmit FIFO invalid write flag" "No invalid data,Invalid data"
rbitfld.long 0x00 17. "RFDF,Receive FIFO drain flag" "Empty,Not empty"
rbitfld.long 0x00 12.--15. "TXCTR,TX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 8.--11. "TXNXTPTR,Transmit next pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 4.--7. "RXCTR,RX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 0.--3. "POPNXTPTR,Pointer to the RX FIFO entry to be returned when the POPR is read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
group.long 0x2C++0x03
line.long 0x00 "SR,Status Register"
eventfld.long 0x00 31. "TCF,Transfer complete flag" "Not completed,Completed"
rbitfld.long 0x00 30. "TXRXS,TX and RX status" "Stopped,Running"
eventfld.long 0x00 28. "EOQF,End of queue flag" "Not set,Set"
eventfld.long 0x00 27. "TFUF,Transmit FIFO underflow flag" "No underflow,Underflow"
newline
eventfld.long 0x00 25. "TFFF,Transmit FIFO fill flag" "Full,Not full"
eventfld.long 0x00 23. "CMDTCF,Command transfer complete flag" "Not completed,Completed"
eventfld.long 0x00 21. "SPEF,SPI parity error flag" "No error,Error"
eventfld.long 0x00 19. "RFOF,Receive FIFO overflow flag" "No overflow,Overflow"
newline
eventfld.long 0x00 18. "TFIWF,Transmit FIFO invalid write flag" "No invalid data,Invalid data"
rbitfld.long 0x00 17. "RFDF,Receive FIFO drain flag" "Empty,Not empty"
rbitfld.long 0x00 12.--15. "TXCTR,TX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 8.--11. "TXNXTPTR,Transmit next pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 4.--7. "RXCTR,RX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 0.--3. "POPNXTPTR,Pointer to the RX FIFO entry to be returned when the POPR is read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
endif
if (((per.l(ad:0x02110000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0x30++0x03
line.long 0x00 "RSER,DMA/Interrupt Request Select And Enable Register"
bitfld.long 0x00 31. "TCF_RE,Transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CMDFFF_RE,Command FIFO fill flag request enable" "Disabled,Enabled"
bitfld.long 0x00 28. "EOQF_RE,Finished request enable" "Disabled,Enabled"
bitfld.long 0x00 27. "TFUF_RE,Transmit FIFO underflow request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "TFFF_RE,Transmit FIFO fill request enable" "Disabled,Enabled"
bitfld.long 0x00 24. "TFFF_DIRS,Transmit FIFO fill DMA or interrupt request select" "Interrupt,DMA"
bitfld.long 0x00 23. "CMDTCF_RE,Command transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 21. "SPEF_RE,SPI parity error request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "RFOF_RE,Receive FIFO overflow request enable" "Disabled,Enabled"
bitfld.long 0x00 18. "TFIWF_RE,Transmit FIFO invalid write request enable" "Disabled,Enabled"
bitfld.long 0x00 17. "RFDF_RE,Receive FIFO drain request enable" "Disabled,Enabled"
bitfld.long 0x00 16. "RFDF_DIRS,Receive FIFO drain DMA or interrupt request select" "Interrupt,DMA"
newline
bitfld.long 0x00 15. "CMDFFF_DIRS,Command FIFO fill DMA or interrupt request select" "Interrupt,DMA"
else
group.long 0x30++0x03
line.long 0x00 "RSER,DMA/Interrupt Request Select And Enable Register"
bitfld.long 0x00 31. "TCF_RE,Transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CMDFFF_RE,Command FIFO fill flag request enable" "Disabled,Enabled"
bitfld.long 0x00 28. "EOQF_RE,Finished request enable" "Disabled,Enabled"
bitfld.long 0x00 27. "TFUF_RE,Transmit FIFO underflow request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "TFFF_RE,Transmit FIFO fill request enable" "Disabled,Enabled"
bitfld.long 0x00 24. "TFFF_DIRS,Transmit FIFO fill DMA or interrupt request select" "Interrupt,DMA"
bitfld.long 0x00 23. "CMDTCF_RE,Command transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 21. "SPEF_RE,SPI parity error request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "RFOF_RE,Receive FIFO overflow request enable" "Disabled,Enabled"
bitfld.long 0x00 18. "TFIWF_RE,Transmit FIFO invalid write request enable" "Disabled,Enabled"
bitfld.long 0x00 17. "RFDF_RE,Receive FIFO drain request enable" "Disabled,Enabled"
bitfld.long 0x00 16. "RFDF_DIRS,Receive FIFO drain DMA or interrupt request select" "Interrupt,DMA"
newline
bitfld.long 0x00 15. "CMDFFF_DIRS,Command FIFO fill DMA or interrupt request select" "Interrupt,DMA"
endif
if (((per.l(ad:0x02110000))&0x80000000)==0x80000000)
if (((per.l(ad:0x02110000))&0x04)==0x04)
group.long 0x34++0x03
line.long 0x00 "PUSHR,PUSH TX FIFO Register In Master Mode"
bitfld.long 0x00 31. "CONT,Continuous peripheral chip select enable" "Disabled,Enabled"
bitfld.long 0x00 28.--30. "CTAS,Clock and transfer attributes select" "CTAR0,CTAR1,?..."
bitfld.long 0x00 27. "EOQ,End of queue" "Not the last,Last"
bitfld.long 0x00 26. "CTCNT,Clear transfer counter" "Not cleared,Cleared"
newline
bitfld.long 0x00 25. "MASC,After-SCK delay masked" "Not masked,Masked"
bitfld.long 0x00 24. "MSCS,PCS to SCK delay masked" "Not masked,Masked"
bitfld.long 0x00 19. "PCS[3],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 18. "[2],Assert PCS for the transfer" "Negate,Assert"
newline
bitfld.long 0x00 17. "[1],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 16. "[0],Assert PCS for the transfer" "Negate,Assert"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
else
group.long 0x34++0x03
line.long 0x00 "PUSHR,PUSH TX FIFO Register In Master Mode"
bitfld.long 0x00 31. "CONT,Continuous peripheral chip select enable" "Disabled,Enabled"
bitfld.long 0x00 28.--30. "CTAS,Clock and transfer attributes select" "CTAR0,CTAR1,CTAR2,?..."
bitfld.long 0x00 27. "EOQ,End of queue" "Not the last,Last"
bitfld.long 0x00 26. "CTCNT,Clear transfer counter" "Not cleared,Cleared"
newline
bitfld.long 0x00 25. "PE,Parity enable" "Disabled,Enabled"
bitfld.long 0x00 24. "PP,Parity polarity" "Even,Odd"
bitfld.long 0x00 19. "PCS[3],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 18. "[2],Assert PCS for the transfer" "Negate,Assert"
newline
bitfld.long 0x00 17. "[1],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 16. "[0],Assert PCS for the transfer" "Negate,Assert"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
endif
else
group.long 0x34++0x03
line.long 0x00 "PUSHR_SLAVE,PUSH TX FIFO Register In Slave Mode"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
endif
hgroup.long 0x38++0x03
hide.long 0x00 "POPR,POP RX FIFO Register"
in
newline
repeat 4. (increment 0x3C 0x04)(increment 0. 1.)
if (((per.l(ad:0x02110000))&0x08)==0x00)
if (((per.l(ad:0x02110000))&0x80000000)==0x80000000)
rgroup.long $1++0x03
line.long 0x00 "TXFR$2,Transmit FIFO Register $2"
hexmask.long.word 0x00 16.--31. 1. "TXCMD,Transmit command"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
else
rgroup.long $1++0x03
line.long 0x00 "TXFR$2,Transmit FIFO Register $2"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
endif
else
hgroup.long $1++0x03
hide.long 0x00 "TXFR$2,Transmit FIFO Register $2"
endif
repeat.end
newline
repeat 4. (increment 0x7C 0x04)(increment 0. 1.)
hgroup.long $1++0x03
hide.long 0x00 "RXFR$2,Receive FIFO Register $2"
in
newline
repeat.end
repeat 2. (increment 0x11C 0x04)(increment 0. 1.)
if (((per.l(ad:0x02110000))&0x08)==0x08)
group.long $1++0x03
line.long 0x00 "CTARE$2,Clock And Transfer Attributes Register Extended $2"
bitfld.long 0x00 16. "FMSZE,Frame size extended" "16b,32b"
hexmask.long.word 0x00 0.--10. 1. "DTCP,Data transfer count preload"
else
hgroup.long $1++0x03
hide.long 0x00 "CTARE$2,Clock And Transfer Attributes Register Extended $2"
endif
repeat.end
rgroup.long 0x13C++0x03
line.long 0x00 "SREX,Status Register Extended"
bitfld.long 0x00 14. "TXCTR4,TX FIFO counter[4]" "0,1"
bitfld.long 0x00 11. "RXCTR4,RX FIFO counter[4]" "0,1"
bitfld.long 0x00 4.--8. "CMDCTR,CMD FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--3. "CMDNXTPTR,Command next pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree "SPI3"
base ad:0x02120000
if (((per.l(ad:0x02120000))&0x4000)==0x00)
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MSTR,Master/slave mode select" "Slave,Master"
bitfld.long 0x00 30. "CONT_SCKE,Continuous SCK enable" "Disabled,Enabled"
rbitfld.long 0x00 28.--29. "DCONF,SPI configuration" "SPI,?..."
bitfld.long 0x00 27. "FRZ,Freeze enable" "Not halted,Halted"
newline
bitfld.long 0x00 24. "ROOE,Receive FIFO overflow overwrite enable" "Ignored,Shifted"
bitfld.long 0x00 19. "PCSIS[3],Peripheral chip select 3 inactive state" "Low,High"
bitfld.long 0x00 18. "[2],Peripheral chip select 2 inactive state" "Low,High"
bitfld.long 0x00 17. "[1],Peripheral chip select 1 inactive state" "Low,High"
newline
bitfld.long 0x00 16. "[0],Peripheral chip select 0 inactive state" "Low,High"
bitfld.long 0x00 14. "MDIS,Module disable" "No,Yes"
bitfld.long 0x00 13. "DIS_TXF,Disable transmit FIFO" "No,Yes"
bitfld.long 0x00 12. "DIS_RXF,Disable receive FIFO" "No,Yes"
newline
bitfld.long 0x00 11. "CLR_TXF,Clear TX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 10. "CLR_RXF,Clear RX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 3. "XSPI,Extended SPI mode" "Normal,Extended"
bitfld.long 0x00 2. "FCPCS,Fast continuous PCS mode" "Normal/Slow continuous,Fast continuous"
newline
bitfld.long 0x00 1. "PES,Parity error stop" "Continued,Stopped"
bitfld.long 0x00 0. "HALT,Halt" "Start,Stop"
else
group.long 0x00++0x03
line.long 0x00 "MCR,Module Configuration Register"
bitfld.long 0x00 31. "MSTR,Master/slave mode select" "Slave,Master"
bitfld.long 0x00 30. "CONT_SCKE,Continuous SCK enable" "Disabled,Enabled"
rbitfld.long 0x00 28.--29. "DCONF,SPI configuration" "SPI,?..."
bitfld.long 0x00 27. "FRZ,Freeze enable" "Not halted,Halted"
newline
bitfld.long 0x00 24. "ROOE,Receive FIFO overflow overwrite enable" "Ignored,Shifted"
bitfld.long 0x00 19. "PCSIS[3],Peripheral chip select 3 inactive state" "Low,High"
bitfld.long 0x00 18. "[2],Peripheral chip select 2 inactive state" "Low,High"
bitfld.long 0x00 17. "[1],Peripheral chip select 1 inactive state" "Low,High"
newline
bitfld.long 0x00 16. "[0],Peripheral chip select 0 inactive state" "Low,High"
bitfld.long 0x00 14. "MDIS,Module disable" "No,Yes"
rbitfld.long 0x00 13. "DIS_TXF,Disable transmit FIFO" "No,Yes"
rbitfld.long 0x00 12. "DIS_RXF,Disable receive FIFO" "No,Yes"
newline
bitfld.long 0x00 11. "CLR_TXF,Clear TX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 10. "CLR_RXF,Clear RX FIFO" "Not cleared,Cleared"
bitfld.long 0x00 3. "XSPI,Extended SPI mode" "Normal,Extended"
bitfld.long 0x00 2. "FCPCS,Fast continuous PCS mode" "Normal/Slow continuous,Fast continuous"
newline
bitfld.long 0x00 1. "PES,Parity error stop" "Continued,Stopped"
bitfld.long 0x00 0. "HALT,Halt" "Start,Stop"
endif
if (((per.l(ad:0x02120000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0x08++0x03
line.long 0x00 "TCR,Transfer Count Register"
hexmask.long.word 0x00 16.--31. 1. "SPI_TCNT,SPI transfer counter"
else
group.long 0x08++0x03
line.long 0x00 "TCR,Transfer Count Register"
hexmask.long.word 0x00 16.--31. 1. "SPI_TCNT,SPI transfer counter"
endif
if (((per.l(ad:0x02120000))&0x80000000)==0x80000000)
if (((per.l(ad:0x02120000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0xC++0x03
line.long 0x00 "CTAR0,Clock And Transfer Attributes Register 0"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
else
group.long 0xC++0x03
line.long 0x00 "CTAR0,Clock And Transfer Attributes Register 0"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
endif
else
group.long 0xC++0x03
line.long 0x00 "CTAR0_SLAVE,Clock And Transfer Attributes Register 0"
bitfld.long 0x00 27.--31. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits,32 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
bitfld.long 0x00 24. "PE,Parity enable" "Disabled,Enabled"
newline
bitfld.long 0x00 23. "PP,Parity polarity" "Even,Odd"
endif
if (((per.l(ad:0x02120000))&0x80000000)==0x80000000)
if (((per.l(ad:0x02120000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0x10++0x03
line.long 0x00 "CTAR1,Clock And Transfer Attributes Register 1"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
else
group.long 0x10++0x03
line.long 0x00 "CTAR1,Clock And Transfer Attributes Register 1"
bitfld.long 0x00 31. "DBR,Double baud rate" "Normal,Doubled"
bitfld.long 0x00 27.--30. "FMSZ,Frame size" ",,,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits"
bitfld.long 0x00 26. "CPOL,Clock polarity" "Inactive low,Inactive high"
bitfld.long 0x00 25. "CPHA,Clock phase" "Capture-change,Change-capture"
newline
bitfld.long 0x00 24. "LSBFE,LSB first" "MSB first,LSB first"
bitfld.long 0x00 22.--23. "PCSSCK,PCS to SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 20.--21. "PASC,After SCK delay prescaler" "1,3,5,7"
bitfld.long 0x00 18.--19. "PDT,Delay after transfer prescaler" "1,3,5,7"
newline
bitfld.long 0x00 16.--17. "PBR,Baud rate prescaler" "2,3,5,7"
bitfld.long 0x00 12.--15. "CSSCK,PCS to SCK delay scale" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 8.--11. "ASC,After SCK delay scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
bitfld.long 0x00 4.--7. "DT,Delay after transfer scaler" "2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536"
newline
bitfld.long 0x00 0.--3. "BR,Baud rate scaler" "2,4,6,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
endif
else
endif
if (((per.l(ad:0x02120000))&0x08)==0x08)
group.long 0x2C++0x03
line.long 0x00 "SR,Status Register"
eventfld.long 0x00 31. "TCF,Transfer complete flag" "Not completed,Completed"
rbitfld.long 0x00 30. "TXRXS,TX and RX status" "Stopped,Running"
eventfld.long 0x00 28. "EOQF,End of queue flag" "Not set,Set"
eventfld.long 0x00 27. "TFUF,Transmit FIFO underflow flag" "No underflow,Underflow"
newline
eventfld.long 0x00 25. "TFFF,Transmit FIFO fill flag" "Full,Not full"
rbitfld.long 0x00 24. "BSYF,Busy flag" "Idle,In progress"
eventfld.long 0x00 23. "CMDTCF,Command transfer complete flag" "Not completed,Completed"
eventfld.long 0x00 21. "SPEF,SPI parity error flag" "No error,Error"
newline
eventfld.long 0x00 19. "RFOF,Receive FIFO overflow flag" "No overflow,Overflow"
eventfld.long 0x00 18. "TFIWF,Transmit FIFO invalid write flag" "No invalid data,Invalid data"
rbitfld.long 0x00 17. "RFDF,Receive FIFO drain flag" "Empty,Not empty"
rbitfld.long 0x00 12.--15. "TXCTR,TX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 8.--11. "TXNXTPTR,Transmit next pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 4.--7. "RXCTR,RX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 0.--3. "POPNXTPTR,Pointer to the RX FIFO entry to be returned when the POPR is read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
else
group.long 0x2C++0x03
line.long 0x00 "SR,Status Register"
eventfld.long 0x00 31. "TCF,Transfer complete flag" "Not completed,Completed"
rbitfld.long 0x00 30. "TXRXS,TX and RX status" "Stopped,Running"
eventfld.long 0x00 28. "EOQF,End of queue flag" "Not set,Set"
eventfld.long 0x00 27. "TFUF,Transmit FIFO underflow flag" "No underflow,Underflow"
newline
eventfld.long 0x00 25. "TFFF,Transmit FIFO fill flag" "Full,Not full"
eventfld.long 0x00 23. "CMDTCF,Command transfer complete flag" "Not completed,Completed"
eventfld.long 0x00 21. "SPEF,SPI parity error flag" "No error,Error"
eventfld.long 0x00 19. "RFOF,Receive FIFO overflow flag" "No overflow,Overflow"
newline
eventfld.long 0x00 18. "TFIWF,Transmit FIFO invalid write flag" "No invalid data,Invalid data"
rbitfld.long 0x00 17. "RFDF,Receive FIFO drain flag" "Empty,Not empty"
rbitfld.long 0x00 12.--15. "TXCTR,TX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 8.--11. "TXNXTPTR,Transmit next pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
rbitfld.long 0x00 4.--7. "RXCTR,RX FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rbitfld.long 0x00 0.--3. "POPNXTPTR,Pointer to the RX FIFO entry to be returned when the POPR is read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
endif
if (((per.l(ad:0x02120000+0x2C))&0x40000000)==0x40000000)
rgroup.long 0x30++0x03
line.long 0x00 "RSER,DMA/Interrupt Request Select And Enable Register"
bitfld.long 0x00 31. "TCF_RE,Transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CMDFFF_RE,Command FIFO fill flag request enable" "Disabled,Enabled"
bitfld.long 0x00 28. "EOQF_RE,Finished request enable" "Disabled,Enabled"
bitfld.long 0x00 27. "TFUF_RE,Transmit FIFO underflow request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "TFFF_RE,Transmit FIFO fill request enable" "Disabled,Enabled"
bitfld.long 0x00 24. "TFFF_DIRS,Transmit FIFO fill DMA or interrupt request select" "Interrupt,DMA"
bitfld.long 0x00 23. "CMDTCF_RE,Command transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 21. "SPEF_RE,SPI parity error request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "RFOF_RE,Receive FIFO overflow request enable" "Disabled,Enabled"
bitfld.long 0x00 18. "TFIWF_RE,Transmit FIFO invalid write request enable" "Disabled,Enabled"
bitfld.long 0x00 17. "RFDF_RE,Receive FIFO drain request enable" "Disabled,Enabled"
bitfld.long 0x00 16. "RFDF_DIRS,Receive FIFO drain DMA or interrupt request select" "Interrupt,DMA"
newline
bitfld.long 0x00 15. "CMDFFF_DIRS,Command FIFO fill DMA or interrupt request select" "Interrupt,DMA"
else
group.long 0x30++0x03
line.long 0x00 "RSER,DMA/Interrupt Request Select And Enable Register"
bitfld.long 0x00 31. "TCF_RE,Transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 30. "CMDFFF_RE,Command FIFO fill flag request enable" "Disabled,Enabled"
bitfld.long 0x00 28. "EOQF_RE,Finished request enable" "Disabled,Enabled"
bitfld.long 0x00 27. "TFUF_RE,Transmit FIFO underflow request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 25. "TFFF_RE,Transmit FIFO fill request enable" "Disabled,Enabled"
bitfld.long 0x00 24. "TFFF_DIRS,Transmit FIFO fill DMA or interrupt request select" "Interrupt,DMA"
bitfld.long 0x00 23. "CMDTCF_RE,Command transmission complete request enable" "Disabled,Enabled"
bitfld.long 0x00 21. "SPEF_RE,SPI parity error request enable" "Disabled,Enabled"
newline
bitfld.long 0x00 19. "RFOF_RE,Receive FIFO overflow request enable" "Disabled,Enabled"
bitfld.long 0x00 18. "TFIWF_RE,Transmit FIFO invalid write request enable" "Disabled,Enabled"
bitfld.long 0x00 17. "RFDF_RE,Receive FIFO drain request enable" "Disabled,Enabled"
bitfld.long 0x00 16. "RFDF_DIRS,Receive FIFO drain DMA or interrupt request select" "Interrupt,DMA"
newline
bitfld.long 0x00 15. "CMDFFF_DIRS,Command FIFO fill DMA or interrupt request select" "Interrupt,DMA"
endif
if (((per.l(ad:0x02120000))&0x80000000)==0x80000000)
if (((per.l(ad:0x02120000))&0x04)==0x04)
group.long 0x34++0x03
line.long 0x00 "PUSHR,PUSH TX FIFO Register In Master Mode"
bitfld.long 0x00 31. "CONT,Continuous peripheral chip select enable" "Disabled,Enabled"
bitfld.long 0x00 28.--30. "CTAS,Clock and transfer attributes select" "CTAR0,CTAR1,?..."
bitfld.long 0x00 27. "EOQ,End of queue" "Not the last,Last"
bitfld.long 0x00 26. "CTCNT,Clear transfer counter" "Not cleared,Cleared"
newline
bitfld.long 0x00 25. "MASC,After-SCK delay masked" "Not masked,Masked"
bitfld.long 0x00 24. "MSCS,PCS to SCK delay masked" "Not masked,Masked"
bitfld.long 0x00 19. "PCS[3],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 18. "[2],Assert PCS for the transfer" "Negate,Assert"
newline
bitfld.long 0x00 17. "[1],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 16. "[0],Assert PCS for the transfer" "Negate,Assert"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
else
group.long 0x34++0x03
line.long 0x00 "PUSHR,PUSH TX FIFO Register In Master Mode"
bitfld.long 0x00 31. "CONT,Continuous peripheral chip select enable" "Disabled,Enabled"
bitfld.long 0x00 28.--30. "CTAS,Clock and transfer attributes select" "CTAR0,CTAR1,CTAR2,?..."
bitfld.long 0x00 27. "EOQ,End of queue" "Not the last,Last"
bitfld.long 0x00 26. "CTCNT,Clear transfer counter" "Not cleared,Cleared"
newline
bitfld.long 0x00 25. "PE,Parity enable" "Disabled,Enabled"
bitfld.long 0x00 24. "PP,Parity polarity" "Even,Odd"
bitfld.long 0x00 19. "PCS[3],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 18. "[2],Assert PCS for the transfer" "Negate,Assert"
newline
bitfld.long 0x00 17. "[1],Assert PCS for the transfer" "Negate,Assert"
bitfld.long 0x00 16. "[0],Assert PCS for the transfer" "Negate,Assert"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
endif
else
group.long 0x34++0x03
line.long 0x00 "PUSHR_SLAVE,PUSH TX FIFO Register In Slave Mode"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
endif
hgroup.long 0x38++0x03
hide.long 0x00 "POPR,POP RX FIFO Register"
in
newline
repeat 4. (increment 0x3C 0x04)(increment 0. 1.)
if (((per.l(ad:0x02120000))&0x08)==0x00)
if (((per.l(ad:0x02120000))&0x80000000)==0x80000000)
rgroup.long $1++0x03
line.long 0x00 "TXFR$2,Transmit FIFO Register $2"
hexmask.long.word 0x00 16.--31. 1. "TXCMD,Transmit command"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
else
rgroup.long $1++0x03
line.long 0x00 "TXFR$2,Transmit FIFO Register $2"
hexmask.long.word 0x00 0.--15. 1. "TXDATA,Transmit data"
endif
else
hgroup.long $1++0x03
hide.long 0x00 "TXFR$2,Transmit FIFO Register $2"
endif
repeat.end
newline
repeat 4. (increment 0x7C 0x04)(increment 0. 1.)
hgroup.long $1++0x03
hide.long 0x00 "RXFR$2,Receive FIFO Register $2"
in
newline
repeat.end
repeat 2. (increment 0x11C 0x04)(increment 0. 1.)
if (((per.l(ad:0x02120000))&0x08)==0x08)
group.long $1++0x03
line.long 0x00 "CTARE$2,Clock And Transfer Attributes Register Extended $2"
bitfld.long 0x00 16. "FMSZE,Frame size extended" "16b,32b"
hexmask.long.word 0x00 0.--10. 1. "DTCP,Data transfer count preload"
else
hgroup.long $1++0x03
hide.long 0x00 "CTARE$2,Clock And Transfer Attributes Register Extended $2"
endif
repeat.end
rgroup.long 0x13C++0x03
line.long 0x00 "SREX,Status Register Extended"
bitfld.long 0x00 14. "TXCTR4,TX FIFO counter[4]" "0,1"
bitfld.long 0x00 11. "RXCTR4,RX FIFO counter[4]" "0,1"
bitfld.long 0x00 4.--8. "CMDCTR,CMD FIFO counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--3. "CMDNXTPTR,Command next pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
tree.end
tree.end
tree "TMU (Thermal Monitoring Unit)"
base ad:0x01F80000
group.long 0x00++0x03
line.long 0x00 "TMR,Mode Register"
bitfld.long 0x00 31. "ME,Monitoring mode enable" "Disabled,Enabled"
bitfld.long 0x00 26.--27. "ALPF,Average low pass filter setting" "1.0,0.5,0.25,0.125"
bitfld.long 0x00 14.--15. "MSITE,Monitoring site select" "0,1,2,3"
rgroup.long 0x04++0x03
line.long 0x00 "TSR,Status Register"
bitfld.long 0x00 30. "MIE,Monitoring interval exceeded" "Not exceeded,Exceeded"
bitfld.long 0x00 29. "ORL,Out-of-range low temperature measurement" "Not detected,Detected"
bitfld.long 0x00 28. "ORH,Out-of-range high temperature measurement" "Not detected,Detected"
if (((per.l(ad:0x01F80000+0x00))&0x80000000)==0x80000000)
rgroup.long 0x08++0x03
line.long 0x00 "TMTMIR,Monitor Temperature Measurement Interval Register"
bitfld.long 0x00 0.--3. "TMI,Temperature monitoring interval" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,"
else
group.long 0x08++0x03
line.long 0x00 "TMTMIR,Monitor Temperature Measurement Interval Register"
bitfld.long 0x00 0.--3. "TMI,Temperature monitoring interval" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,"
endif
group.long 0x20++0x0F
line.long 0x00 "TIER,Interrupt Enable Register"
bitfld.long 0x00 31. "ITTEIE,Immediate temperature threshold exceeded interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 30. "ATTEIE,Average temperature threshold exceeded interrupt enable" "Disabled,Enabled"
bitfld.long 0x00 29. "ATCTEIE,Average temperature critical threshold exceeded interrupt enable" "Disabled,Enabled"
line.long 0x04 "TIDR,Interrupt Detect Register"
eventfld.long 0x04 31. "ITTE,Immediate temperature threshold exceeded" "Not exceeded,Exceeded"
eventfld.long 0x04 30. "ATTE,Average temperature threshold exceeded" "Not exceeded,Exceeded"
eventfld.long 0x04 29. "ATCTE,Average temperature critical threshold exceeded" "Not exceeded,Exceeded"
line.long 0x08 "TISCR,Interrupt Site Capture Register"
bitfld.long 0x08 30.--31. "ISITE,Temperature sensor site associated with the setting of TIDDR[ITTE]" "0,1,2,3"
bitfld.long 0x08 14.--15. "ASITE,Temperature sensor site associated with the setting of TIDDR[ATTE]" "0,1,2,3"
line.long 0x0C "TICSCR,Interrupt Critical Site Capture Register"
bitfld.long 0x0C 14.--15. "CASITE,Temperature sensor site associated with the setting of TIDR[ATCTE]" "0,1,2,3"
if (((per.l(ad:0x01F80000+0x40))&0x80000000)==0x80000000)
rgroup.long 0x40++0x03
line.long 0x00 "TMHTCR,Monitor High Temperature Capture Register"
bitfld.long 0x00 31. "V,Valid reading" "Not valid,Valid"
hexmask.long.byte 0x00 0.--7. 1. "TEMP,Highest temperature recorded in degrees Celsius"
else
rgroup.long 0x40++0x03
line.long 0x00 "TMHTCR,Monitor High Temperature Capture Register"
bitfld.long 0x00 31. "V,Valid reading" "Not valid,Valid"
endif
if (((per.l(ad:0x01F80000+0x44))&0x80000000)==0x80000000)
rgroup.long 0x44++0x03
line.long 0x00 "TMLTCR,Monitor Low Temperature Capture Register"
bitfld.long 0x00 31. "V,Valid reading" "Not valid,Valid"
hexmask.long.byte 0x00 0.--7. 1. "TEMP,Lowest temperature in Celsius that any enabled monitored site records"
else
rgroup.long 0x44++0x03
line.long 0x00 "TMLTCR,Monitor Low Temperature Capture Register"
bitfld.long 0x00 31. "V,Valid reading" "Not valid,Valid"
endif
group.long 0x50++0x0B
line.long 0x00 "TMHTITR,Monitor High Temperature Immediate Threshold Register"
bitfld.long 0x00 31. "EN,Enable threshold" "Disabled,Enabled"
hexmask.long.byte 0x00 0.--7. 1. "TEMP,High temperature immediate threshold value"
line.long 0x04 "TMHTATR,Monitor High Temperature Average Threshold Register"
bitfld.long 0x04 31. "EN,Enable threshold" "Disabled,Enabled"
hexmask.long.byte 0x04 0.--7. 1. "TEMP,High temperature average threshold value"
line.long 0x08 "TMHTACTR,Monitor High Temperature Average Critical Threshold Register"
bitfld.long 0x08 31. "EN,Enable threshold" "Disabled,Enabled"
hexmask.long.byte 0x08 0.--7. 1. "TEMP,High temperature average critical threshold value"
group.long 0x80++0x07
line.long 0x00 "TTCFGR,Temperature Configuration Register"
line.long 0x04 "TSCFGR,Sensor Configuration Register"
repeat 2. (increment 0x100 0x10)(increment 0. 1.)
rgroup.long $1++0x07
line.long 0x00 "TRITSR$2,Report Immediate Temperature At Site Register $2"
bitfld.long 0x00 31. "V,Valid measured temperature" "Not valid,Valid"
hexmask.long.byte 0x00 0.--7. 1. "TEMP,Last temperature reading at site"
line.long 0x04 "TRATSR$2,Report Average Temperature Site Register $2"
bitfld.long 0x04 31. "V,Valid measured temperature" "Not valid,Valid"
hexmask.long.byte 0x04 0.--7. 1. "TEMP,Average temperature reading at site"
repeat.end
repeat 4. (increment 0xF10 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "TTR$2CR,Temperature Range $2 Control Register"
bitfld.long 0x00 16.--19. "CAL_PTR,Temperature configuration points" ",2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
hexmask.long.byte 0x00 0.--7. 1. "TEMP,Starting temperature in Celsius for range"
repeat.end
tree.end
tree "TZ (Trust Zone)"
tree "TZC400"
base ad:0x1100000
rgroup.long 0x00++0x03
line.long 0x00 "BUILD_CONFIG,Build Configuration Register"
bitfld.long 0x00 24.--25. "NO_OF_FILTERS,Number of filters minus one" "0,1,2,3"
bitfld.long 0x00 8.--13. "ADDRESS_WIDTH,Address width minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x00 0.--4. "NO_OF_REGIONS,Number of regions minus one" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0x04++0x0B
line.long 0x00 "ACTION,Action Register"
bitfld.long 0x00 0.--1. "REACTION_VALUE,Failure reaction" "TZCINT LOW/OKAY response,TZCINT LOW/DECERR response,TZCINT HIGH/OKAY response,TZCINT HIGH/DECERR response"
line.long 0x04 "GATE_KEEPER,Gate Keeper Register"
rbitfld.long 0x04 16. "OPEN_STATUS,Gate keeper open status" "Not opened,Opened"
bitfld.long 0x04 0. "OPEN_REQUEST,Gate keeper open request" "Not requested,Requested"
line.long 0x08 "SPECULATION_CTRL,Speculation Control Register"
bitfld.long 0x08 1. "WRITE_SPEC_DISABLE,Write speculation disable control" "No,Yes"
bitfld.long 0x08 0. "READ_SPEC_DISABLE,Read speculation disable control" "No,Yes"
rgroup.long 0x10++0x03
line.long 0x00 "INT_STATUS,Interrupt Status Register"
bitfld.long 0x00 16. "OVERLAP,Interrupt status - overlap" "No interrupt,Interrupt"
bitfld.long 0x00 8. "OVERRUN,Interrupt status - overrun" "No interrupt,Interrupt"
bitfld.long 0x00 0. "STATUS,Interrupt status" "No interrupt,Interrupt"
wgroup.long 0x14++0x03
line.long 0x00 "INT_CLEAR,Interrupt Clear Register"
bitfld.long 0x00 0. "CLEAR,Interrupt clear" "No clear,Clear"
rgroup.long 0x20++0x0B
line.long 0x00 "FAIL_ADDRESS_LOW_0,Fail Address Low Register"
line.long 0x04 "FAIL_ADDRESS_HIGH_0,Fail Address High Register"
hexmask.long.byte 0x04 0.--7. 0x01 "ADDR_STATUS_HIGH,Failure access's high address"
line.long 0x08 "FAIL_CONTROL_0,Fail Control Register"
bitfld.long 0x08 24. "DIRECTION,Failure access's direction" "Read,Write"
bitfld.long 0x08 21. "NONSECURE,Failure access's security value" "Secure,Non-secure"
bitfld.long 0x08 20. "PRIVILEGED,Failure access's privileged value" "Unprivileged,Privileged"
rgroup.long 0x100++0x0F "Region 0"
line.long 0x00 "REGION_BASE_LOW_0,Region 0 Base Address Low Register"
hexmask.long.tbyte 0x00 12.--31. 0x10 "BASE_ADDRESS_LOW_0,Region base address lower 32bits"
line.long 0x04 "REGION_BASE_HIGH_0,Region 0 Base Address High Register"
hexmask.long.byte 0x04 0.--7. 0x01 "BASE_ADDRESS_HIGH_0,Region base address higher bits"
line.long 0x08 "REGION_TOP_LOW_0,Region 0 Top Address Low Register"
hexmask.long.tbyte 0x08 12.--31. 0x10 "TOP_ADDRESS_LOW_0,Region top address lower 32bits"
hexmask.long.word 0x08 0.--11. 0x10 "HIGH_4KB,Highest byte of a 4KB-aligned area"
line.long 0x0C "REGION_TOP_HIGH_0,Region 0 Top Address High Register"
hexmask.long.byte 0x0C 0.--7. 0x01 "TOP_ADDRESS_HIGH_0,Region top address higher bits"
group.long 0x110++0x03
line.long 0x00 "REGION_ATTRIBUTES_0,Region 0 Attribute Register"
bitfld.long 0x00 31. "S_WR_EN,Region secure write enable" "Disabled,Enabled"
bitfld.long 0x00 30. "S_RD_EN,Region secure read enable" "Disabled,Enabled"
rbitfld.long 0x00 0. "FILTER_EN,Region filter enable" "Disabled,Enabled"
repeat 8. (increment 0x120 0x20)(increment 1. 1.)
group.long $1++0x13 "Region $2"
line.long 0x00 "REGION_BASE_LOW_$2,Region $2 Base Address Low Register"
hexmask.long.tbyte 0x00 12.--31. 0x10 "BASE_ADDRESS_LOW_$2,Region base address lower 32bits"
line.long 0x04 "REGION_BASE_HIGH_$2,Region $2 Base Address High Register"
hexmask.long.byte 0x04 0.--7. 0x01 "BASE_ADDRESS_HIGH_$2,Region base address higher bits"
line.long 0x08 "REGION_TOP_LOW_$2,Region $2 Top Address Low Register"
hexmask.long.tbyte 0x08 12.--31. 0x10 "TOP_ADDRESS_LOW_$2,Region top address lower 32bits"
line.long 0x0C "REGION_TOP_HIGH_$2,Region $2 Top Address High Register"
hexmask.long.byte 0x0C 0.--7. 0x01 "TOP_ADDRESS_HIGH_$2,Region top address higher bits"
line.long 0x10 "REGION_ATTRIBUTES_$2,Region $2 Attribute Register"
bitfld.long 0x10 31. "S_WR_EN,Region secure write enable" "Disabled,Enabled"
bitfld.long 0x10 30. "S_RD_EN,Region secure read enable" "Disabled,Enabled"
bitfld.long 0x10 0. "FILTER_EN,Region filter enable" "Disabled,Enabled"
repeat.end
rgroup.long 0xFE0++0x0F
line.long 0x00 "PID0,Peripheral Identification 0 Register"
hexmask.long.byte 0x00 0.--7. 1. "PART_NUMBER_0,Part number lower 8 bits"
line.long 0x04 "PID1,Peripheral Identification 1 Register"
bitfld.long 0x04 4.--7. "JEP106_ID_3_0,JEP106 Arm's identification code bits 3 down to 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "PART_NUMBER_0,Part number top 4 bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x08 "PID2,Peripheral Identification 2 Register"
bitfld.long 0x08 4.--7. "REVISION,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 3. "JEDEC_USED,Indicates the use of JEP106 manufacturer's identity code" "0,1"
bitfld.long 0x08 0.--2. "JEP106_ID_6_4,JEP106 Arm's identification code bits 6 down to 4" "0,1,2,3,4,5,6,7"
line.long 0x0C "PID3,Peripheral Identification 3 Register"
bitfld.long 0x0C 4.--7. "REVAND,User modifiable revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x0C 0.--3. "MOD_NUMBER,Modification number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat 4. (increment 0xFF0 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "CID$2,Component Identification $2 Register"
hexmask.long.byte 0x00 0.--7. 1. "COMP_ID_$2,Component identity $2"
repeat.end
tree.end
tree "TZPC"
base ad:0x2200000
group.long 0x00++0x03
line.long 0x00 "TZPCR0SIZE,Secure RAM Region Size Register"
hexmask.long.word 0x00 0.--9. 1. "R0SIZE,Secure RAM region size in 4KB steps"
group.long 0x800++0x03
line.long 0x00 "TZDECPROT0_STAT/SET/CLR,TZDECPROT Register 0 Stat/Set/Clr"
setclrfld.long 0x00 7. 0x04 7. 0x08 7. "DDRC,DDRC configuration registers writable" "Not writable,Writable"
setclrfld.long 0x00 3. 0x04 3. 0x08 3. "DCFG_RESET,Accessibility of registers needing protection against non-secure accesses" "Secure transactions,All transactions"
setclrfld.long 0x00 2. 0x04 2. 0x08 2. "SPI,SPI protection" "Secured,Non-secured"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "I2C_1,I2C_1 protection" "Secured,Non-secured"
group.long 0x80C++0x03
line.long 0x00 "TZDECPROT1_STAT/SET/CLR,TZDECPROT Register 1 Stat/Set/Clr"
setclrfld.long 0x00 5. 0x04 5. 0x08 5. "TZ_WDT_CTL,TZ WDOG timer operation status when all GPP cores are in a debug halted state" "Not halted,Halted"
setclrfld.long 0x00 1. 0x04 1. 0x08 1. "SPIDEN,Global secure privileged invasive debug enable" "Disabled,Enabled"
setclrfld.long 0x00 0. 0x04 0. 0x08 0. "SPNIDEN,Global secure privileged non-invasive debug enable" "Disabled,Enabled"
rgroup.long 0xFE0++0x0F
line.long 0x00 "TZPCPERIPHID0,TZPC Peripheral Identification Register 0"
hexmask.long.byte 0x00 0.--7. 1. "PARTNUMBER0,Partnumber0"
line.long 0x04 "TZPCPERIPHID1,TZPC Peripheral Identification Register 1"
bitfld.long 0x04 4.--7. "DESIGNER0,Designer0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "PARTNUMBER1,Partnumber1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x08 "TZPCPERIPHID2,TZPC Peripheral Identification Register 2"
bitfld.long 0x08 4.--7. "REVISION,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 0.--3. "DESIGNER1,Designer1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x0C "TZPCPERIPHID3,TZPC Peripheral Identification Register 3"
hexmask.long.byte 0x0C 0.--7. 1. "CONFIGURATION,Configuration"
repeat 4. (increment 0xFF0 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "TZPCPCELLID$2,TZPC Identification Register $2"
hexmask.long.byte 0x00 0.--7. 1. "TZPCPCELLID$2,PrimeCell identity $2"
repeat.end
tree.end
tree.end
tree "USB 3.0 (Universal Serial Bus Interface 3.0)"
tree "USBC1"
base ad:0x03100000
rgroup.long 0x00++0x1F
line.long 0x00 "CAPLENGTH,Capability Registers Length And HC Interface Version Number"
hexmask.long.word 0x00 16.--31. 1. "HCIVERSION,HC interface version number"
hexmask.long.byte 0x00 0.--7. 1. "CAPLENGTH,Capability registers length"
line.long 0x04 "HCSPARAMS1,Host Controller Structural Parameters 1"
hexmask.long.byte 0x04 24.--31. 1. "MAXPORTS,Maximum number of ports set as 2"
hexmask.long.word 0x04 8.--18. 1. "MAXINTRS,Number of interrupters set as 1"
newline
hexmask.long.byte 0x04 0.--7. 1. "MAXSLOTS,Number of device slots set as 127"
line.long 0x08 "HCSPARAMS2,Host Controller Structural Parameters 2"
bitfld.long 0x08 27.--31. "MAXSCRATCHPADBUFS,Max scratchpad buffers set as 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x08 26. "SPR,Scratchpad restore" "Not restored,Restored"
newline
bitfld.long 0x08 21.--25. "MAXCRATCHPADBUFS_HI,Max scratchpad buffers high" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x08 4.--7. "ERSTMAX,Event ring segment table max set as 15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x08 0.--3. "IST,Isochronous scheduling threshold set as 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x0C "HCSPARAMS3,Host Controller Structural Parameters 3"
hexmask.long.word 0x0C 16.--31. 1. "U2_DEVICE_EXIT_LAT,U2 device exit latency set as 32'h7FF"
hexmask.long.byte 0x0C 0.--7. 1. "U1_DEVICE_EXIT_LAT,U1 device exit latency set as 32'hA"
line.long 0x10 "HCCPARAMS1,Host Controller Capability Parameters 1"
hexmask.long.word 0x10 16.--31. 0x01 "XECP,xHCI extended capabilities pointer set as 544"
bitfld.long 0x10 12.--15. "MAXPSASIZE,Maximum primary stream array size set as 15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x10 11. "CFC,Contiguous frame ID capability" "Not capable,Capable"
bitfld.long 0x10 10. "SEC,Stopper EDLTA capability" "Not capable,Capable"
newline
bitfld.long 0x10 9. "SPC,Short packet capability" "Not capable,Capable"
bitfld.long 0x10 8. "PAE,Parse all event data" "Not parsed,Parsed"
newline
bitfld.long 0x10 7. "NSS,No secondary SID support" "No,Yes"
bitfld.long 0x10 6. "LTC,Latency tolerance messaging capability" "Not capable,Capable"
newline
bitfld.long 0x10 5. "LHRC,Light HC reset capability" "Not capable,Capable"
bitfld.long 0x10 4. "PIND,Port indicators" "Low,High"
newline
bitfld.long 0x10 3. "PPC,Port power control" "Low,High"
bitfld.long 0x10 2. "CSZ,Context size" "Low,High"
newline
bitfld.long 0x10 1. "BNC,BW negotiation capability" "Not capable,Capable"
bitfld.long 0x10 0. "AC64,64-bit addressing capability" "Not capable,Capable"
line.long 0x14 "DBOFF,Doorbell Offset"
hexmask.long 0x14 2.--31. 0x04 "DOORBELL_ARRAY_OFFSET,Doorbell array offset set as 1152"
line.long 0x18 "RTSOFF,Runtime Register Space Offset"
hexmask.long 0x18 5.--31. 0x20 "RUNTIME_REG_SPACE_OFFSET,Runtime register space offset set as 1088"
line.long 0x1C "HCCPARAMS2,Host Controller Capability Parameters 2"
bitfld.long 0x1C 5. "CIC,Configuration information capability" "Not capable,Capable"
bitfld.long 0x1C 4. "LEC,Large ESIT payload capability" "Not capable,Capable"
newline
bitfld.long 0x1C 3. "CTC,Compliance transition capability" "Not capable,Capable"
bitfld.long 0x1C 2. "FSC,Force save context capability" "Not capable,Capable"
newline
bitfld.long 0x1C 1. "CMC,Configure endpoint command max exit latency too large capability" "Not capable,Capable"
bitfld.long 0x1C 0. "U3C,U3 entry capability" "Not capable,Capable"
group.long 0xC100++0x07
line.long 0x00 "GSBUSCFG0,Global SoC Bus Configuration Register 0"
bitfld.long 0x00 28.--31. "DATRDREQINF,AXI-cache for data read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "DESRDREQINF,AXI-cache for descriptor read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "DATWRREQINF,AXI-cache for data write" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "DESWRREQINF,AXI-cache for descriptor write" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 3. "INCR16BRSTENA,INCR16 burst type enable" "Disabled,Enabled"
bitfld.long 0x00 2. "INCR8BRSTENA,INCR 8 burst type enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "INCR4BRSTENA,INCR 4 burst type enable" "Disabled,Enabled"
bitfld.long 0x00 0. "INCRBRSTENA,Undefined length INCR burst type enable" "Disabled,Enabled"
line.long 0x04 "GBUSCFG1,Global SoC Bus Configuration Register 1"
bitfld.long 0x04 12. "EN1KPAGE,1K page boundary enable" "Disabled,Enabled"
bitfld.long 0x04 8.--11. "PIPETRANSLIMIT,AXI pipelined transfers burst request limit" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
if (((per.l(ad:0x03100000+0xC118))&0x03)==0x01)
group.long 0xC108++0x03
line.long 0x00 "GTXTHRCFG,Global Tx Threshold Control Register"
bitfld.long 0x00 29. "USBTXPKTCNTSEL,USB transmit packet count enable" "Disabled,Enabled"
bitfld.long 0x00 24.--27. "USBTXPKTCNT,USB transmit packet count" ",1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.byte 0x00 16.--23. 1. "USBMAXTXBURSTSIZE,USB maximum Tx burst size"
else
hgroup.long 0xC108++0x03
hide.long 0x00 "GTXTHRCFG,Global Tx Threshold Control Register"
endif
if (((per.l(ad:0x03100000+0xC118))&0x03)==0x01)
if (((per.l(ad:0x03100000+0xC10C))&0x20000000)==0x20000000)
group.long 0xC10C++0x03
line.long 0x00 "GRXTHRCFG,Global RX Threshold Control Register"
bitfld.long 0x00 29. "USBRXPKTCNTSEL,USB receive packet count enable" "Disabled,Enabled"
bitfld.long 0x00 24.--27. "USBRXPKTCNT,USB receive packet count" ",1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "USBMAXRXBURSTSIZE,USB maximum receive burst size" ",1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
else
group.long 0xC10C++0x03
line.long 0x00 "GRXTHRCFG,Global RX Threshold Control Register"
bitfld.long 0x00 29. "USBRXPKTCNTSEL,USB receive packet count enable" "Disabled,Enabled"
endif
else
hgroup.long 0xC10C++0x03
hide.long 0x00 "GRXTHRCFG,Global RX Threshold Control Register"
endif
if (((per.l(ad:0x03100000+0xC118))&0x03)==0x00)
if (((per.l(ad:0x03100000+0xC700))&0x07)==(0x04||0x00))
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 16. "U2RSTECN,SuperSpeed mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 14.--15. "FRMSCLDWN,View of a SoF/USOF/ITP scale down SS HS" "125us,62.5us,31.25us,15.625us"
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
newline
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
newline
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
newline
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
elif (((per.l(ad:0x03100000+0xC700))&0x07)==0x01)
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 16. "U2RSTECN,SuperSpeed mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 14.--15. "FRMSCLDWN,View of a SoF/USOF/ITP scale down FS" "1024b,512b,256b,128b"
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
newline
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
newline
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
newline
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
else
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 16. "U2RSTECN,SuperSpeed mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
newline
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
newline
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
endif
else
if (((per.l(ad:0x03100000+0xC700))&0x07)==(0x04||0x00))
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 14.--15. "FRMSCLDWN,View of a SoF/USOF/ITP scale down SS HS" "125us,62.5us,31.25us,15.625us"
newline
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
newline
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
newline
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
elif (((per.l(ad:0x03100000+0xC700))&0x07)==0x01)
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 14.--15. "FRMSCLDWN,View of a SoF/USOF/ITP scale down FS" "1024b,512b,256b,128b"
newline
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
newline
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
newline
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
else
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
newline
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
newline
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
newline
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
endif
endif
group.long 0xC118++0x03
line.long 0x00 "GSTS,Global Status Register"
rbitfld.long 0x00 10. "OTG_IP,OTG interrupt pending" "Not pending,Pending"
rbitfld.long 0x00 7. "HOST_IP,Host interrupt pending" "Not pending,Pending"
newline
rbitfld.long 0x00 6. "DEVICE_IP,Device interrupt pending" "Not pending,Pending"
bitfld.long 0x00 5. "CSRTIMEOUT,CSR timeout" "No timeout,Timeout"
newline
bitfld.long 0x00 4. "BUSERRADDRVLD,Bus error address valid" "Not valid,Valid"
rbitfld.long 0x00 0.--1. "CURMOD,Current mode of operation" "Device,Host,?..."
if (((per.l(ad:0x03100000+0xC118))&0x03)==0x00)
group.long 0xC11C++0x03
line.long 0x00 "GUCTL1,Global User Control Register 1"
bitfld.long 0x00 29. "FILTER_SE0_FSLS_EOP,Filter SE0 for 2 clock for detecting EOP enable" "Disabled,Enabled"
bitfld.long 0x00 28. "TX_IPGAP_LINECHECK_DIS,2.0 MAC linestate check during HS transmit disable" "No,Yes"
newline
bitfld.long 0x00 27. "DEV_TRB_OUT_SPR_IND,OUT TRB status short packet indication enable" "Disabled,Enabled"
bitfld.long 0x00 26. "DEV_FORCE_20_CLK_FOR_30_CLK,UTMI clock route as the pipe3 clock enable" "Disable,Enabled"
newline
bitfld.long 0x00 25. "P3_IN_U2,P3 power state enable" "Disabled,Enabled"
bitfld.long 0x00 24. "DEV_L1_EXIT_BY_HW,Device controlled sending remote wakeup for L1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21.--23. "IP_GAP_ADD_ON,Inter packet gap add on" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20. "DEV_LSP_TAIL_LOCK_DIS,Bug fix for STAR 9000716195 disable" "No,Yes"
newline
bitfld.long 0x00 19. "NAK_PER_ENH_FS,Performance enhancement for FS async endpoints enable" "Disabled,Enabled"
bitfld.long 0x00 18. "NAK_PER_ENH_HS,Performance enhancement for HS async endpoints enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--7. "L1_SUSP_THRLD_FOR_HOST,L1 suspend threshold for host" ",,,,,L1 suspend,L2 suspend,,,,,L1 sleep,,,,Normal working"
bitfld.long 0x00 2. "HC_PARCHK_DISABLE,Host parameter check disable" "No,Yes"
newline
bitfld.long 0x00 1. "OVRLD_L1_SUSP_COM,Overload L1 suspend communication port" "No overload,Overload"
else
group.long 0xC11C++0x03
line.long 0x00 "GUCTL1,Global User Control Register 1"
bitfld.long 0x00 29. "FILTER_SE0_FSLS_EOP,Filter SE0 for 2 clock for detecting EOP enable" "Disabled,Enabled"
bitfld.long 0x00 28. "TX_IPGAP_LINECHECK_DIS,2.0 MAC linestate check during HS transmit disable" "No,Yes"
newline
bitfld.long 0x00 25. "P3_IN_U2,P3 power state enable" "Disabled,Enabled"
bitfld.long 0x00 21.--23. "IP_GAP_ADD_ON,Inter packet gap add on" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20. "DEV_LSP_TAIL_LOCK_DIS,Bug fix for STAR 9000716195 disable" "No,Yes"
bitfld.long 0x00 19. "NAK_PER_ENH_FS,Performance enhancement for FS async endpoints enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. "NAK_PER_ENH_HS,Performance enhancement for HS async endpoints enable" "Disabled,Enabled"
bitfld.long 0x00 16. "PARKMODE_DISABLE_HS,All HS bus instances park mode disable" "No,Yes"
newline
bitfld.long 0x00 8. "L1_SUSP_THRLD_EN_FOR_HOST,L1 suspend threshold enable for host" "Disabled,Enabled"
bitfld.long 0x00 4.--7. "L1_SUSP_THRLD_FOR_HOST,L1 suspend threshold for host" ",,,,,L1 suspend,L2 suspend,,,,,L1 sleep,,,,Normal work"
newline
bitfld.long 0x00 3. "HC_ERRATA_ENABLE,Host ELD enable" "Disabled,Enabled"
bitfld.long 0x00 2. "HC_PARCHK_DISABLE,Host parameter check disable" "No,Yes"
newline
bitfld.long 0x00 1. "OVRLD_L1_SUSP_COM,Overload L1 suspend communication port" "No overload,Overload"
bitfld.long 0x00 0. "LOA_FILTER_EN,USB 2.0 port babble three times check enable" "Disabled,Enabled"
endif
group.long 0xC128++0x03
line.long 0x00 "GUID,Global User ID Register"
if (((per.l(ad:0x03100000+0xC118))&0x03)==0x00)
group.long 0xC12C++0x03
line.long 0x00 "GUCTL,Global User Control Register"
hexmask.long.word 0x00 22.--31. 1. "REFCLKPER,period of ref_clk in nano seconds indication"
bitfld.long 0x00 21. "NOEXTRDI,No extra delay between SOF and the first packet" "Delay,No delay"
newline
bitfld.long 0x00 17. "SPRSCTRLTRANSEN,Sparse control transaction enable" "Disabled,Enabled"
bitfld.long 0x00 14. "USBHSTINAUTORETRYEN,Host IN auto retry" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "ENOVERLAPCHK,Enable check for LFPS overlap during remote Ux exit" "Disabled,Enabled"
bitfld.long 0x00 12. "EXTCAPSUPTEN,External extended capability support enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "NSRTEXTRFSBODI,Insert extra delay between FS bulk" "Not inserted,Inserted"
bitfld.long 0x00 9.--10. "DTCT,Device timeout coarse tuning" "0us,500us,1.5us,6.5us"
newline
hexmask.long.word 0x00 0.--8. 1. "DTFT,Device timeout fine tuning"
else
group.long 0xC12C++0x03
line.long 0x00 "GUCTL,Global User Control Register"
hexmask.long.word 0x00 22.--31. 1. "REFCLKPER,period of ref_clk in nano seconds indication"
bitfld.long 0x00 21. "NOEXTRDI,No extra delay between SOF and the first packet" "Delay,No delay"
newline
bitfld.long 0x00 17. "SPRSCTRLTRANSEN,Sparse control transaction enable" "Disabled,Enabled"
bitfld.long 0x00 16. "RESBWHSEPS,Reserving 85% bandwidth for HS periodic EPs" "80%,85%"
newline
bitfld.long 0x00 15. "CMDEVADDR,Compliance mode for device address" "Equal to slot ID,Increment on command"
bitfld.long 0x00 14. "USBHSTINAUTORETRYEN,Host IN auto retry" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "ENOVERLAPCHK,Enable check for LFPS overlap during remote Ux exit" "Disabled,Enabled"
bitfld.long 0x00 12. "EXTCAPSUPTEN,External extended capability support enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "NSRTEXTRFSBODI,Insert extra delay between FS bulk" "Not inserted,Inserted"
bitfld.long 0x00 9.--10. "DTCT,Device timeout coarse tuning" "0us,500us,1.5us,6.5us"
newline
hexmask.long.word 0x00 0.--8. 1. "DTFT,Device timeout fine tuning"
endif
rgroup.long 0xC130++0x07
line.long 0x00 "GBUSERRADDRLO,Global SoC Bus Error Address Register Low"
line.long 0x04 "GBUSERRADDRHI,Global SoC Bus Error Address Register High"
group.long 0xC138++0x07
line.long 0x00 "GPRTBIMAPLO,Global SS Port To Bus Instance Mapping Register - Low"
bitfld.long 0x00 0.--3. "BINUM1,SS USB instance number for port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "GPRTBIMAPHI,Global SS Port To Bus Instance Mapping Register - High"
bitfld.long 0x04 0.--3. "BINUM9,SS USB instance number for port 9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xC140++0x1F
line.long 0x00 "GHWPARAMS0,Global Hardware Parameters Register 0"
hexmask.long.byte 0x00 24.--31. 1. "DWC_USB3_AWIDTH,Master/slave address bus width: 64 bit"
hexmask.long.byte 0x00 16.--23. 1. "DWC_USB3_SDWIDTH,Slave bus data width: 32 bit"
newline
hexmask.long.byte 0x00 8.--15. 1. "DWC_USB3_MSWIDTH,Master data bus width"
bitfld.long 0x00 6.--7. "DWC_USB3_SBUS_TYPE,Slave bus interface type" "AHB,?..."
newline
bitfld.long 0x00 3.--5. "DWC_USB3_MBUS_TYPE,Master bus interface type" ",AXI,?..."
bitfld.long 0x00 0.--2. "DWC_USB3_MODE,Mode of operation" ",,DRD,?..."
line.long 0x04 "GHWPARAMS1,Global Hardware Parameters Register 1"
bitfld.long 0x04 31. "DWC_USB3_EN_DBC,Enables xHCI debug capability" "Disabled,Enabled"
bitfld.long 0x04 30. "DWC_USB3_RM_OPT_FEATURES,Removes user ID/GPIO ports and SOF toggle and counter ports" "No,Yes"
newline
bitfld.long 0x04 28. "DWC_USB3_RAM_BUS_CLKS_SYNC,RAM and bus clocks synchronized to each other" "No,Yes"
bitfld.long 0x04 27. "DWC_USB3_MAC_RAM_CLKS_SYNC,MAC and RAM clocks synchronized to each other" "No,Yes"
newline
bitfld.long 0x04 26. "DWC_USB3_MAC_PHY_CLKS_SYNC,MAC and PHY clocks synchronized to each other" "No,Yes"
bitfld.long 0x04 24.--25. "DWC_USB3_EN_PWROPT,Power optimization mode" "Disabled,Clock gating only,?..."
newline
bitfld.long 0x04 23. "DWC_USB3_SPRAM_TYP,Synchronous static RAM type" "2-port,Single-port"
bitfld.long 0x04 21.--22. "DWC_USB3_NUM_RAMS,Number of RAMs" "1,2,3,?..."
newline
bitfld.long 0x04 15.--20. "DWC_USB3_DEVICE_NUM_INT,Number of device mode event buffers" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,?..."
bitfld.long 0x04 12.--14. "DWC_USB3_ASPACEWIDTH,Address space port width of master and slave bus interfaces" "1,2,3,4,5,6,?..."
newline
bitfld.long 0x04 9.--11. "DWC_USB3_REQINFOWIDTH,Request/response info port width of master and slave bus interfaces" ",,,4,5,6,?..."
bitfld.long 0x04 6.--8. "DWC_USB3_DATAINFOWIDTH,Data info port width of master and slave bus interfaces" "1,2,3,4,5,6,?..."
newline
bitfld.long 0x04 3.--5. "DWC_USB3_BURSTWIDTH,Burst port width of master and slave bus interfaces" "1,2,3,4,5,6,7,8"
bitfld.long 0x04 0.--2. "DWC_USB3_IDWIDTH1,Master ID port width" ",,,4,5,6,7,8"
line.long 0x08 "GHWPARAMS2,Global Hardware Parameters Register 2"
line.long 0x0C "GHWPARAMS3,Global Hardware Parameters Register 3"
hexmask.long.word 0x0C 23.--30. 1. "DWC_USB3_CACHE_TOTAL_XFER_RESOURCES,Maximum number of transfer resources in the core"
bitfld.long 0x0C 18.--22. "DWC_USB3_NUM_IN_EPS,Number of device mode active IN endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x0C 12.--17. "DWC_USB3_NUM_EPS,Number of device mode endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x0C 10. "DWC_USB3_VENDOR_CTL_INTERFACE,UTMI+ PHY vendor control interface enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 6.--7. "DWC_USB3_HSPHY_DWIDTH,Data width of the UTMI+ PHY interface" ",,8-/16-bits,?..."
bitfld.long 0x0C 2.--3. "DWC_USB3_HSPHY_INTERFACE,High-speed PHY interface" "0,1,2,3"
newline
bitfld.long 0x0C 0.--1. "DWC_USB3_SSPHY_INTERFACE,SuperSpeed PHY interface" "0,1,2,3"
line.long 0x10 "GHWPARAMS4,Global Hardware Parameters Register 4"
bitfld.long 0x10 28.--31. "DWC_USB3_BMU_LSP_DEPTH,Depth of the BMU_LSP status buffer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x10 24.--27. "DWC_USB3_BMU_PTL_DEPTH,Depth of the BMU_PTL source/sink buffers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x10 23. "DWC_USB3_EN_ISOC_SUPT,Isochronous endpoint capability" "Disabled,Enabled"
bitfld.long 0x10 17.--20. "DWC_USB3_NUM_SS_USB_INSTANCES,Number of SuperSpeed USB bus instances" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x10 0.--5. "DWC_USB3_CACHE_TRBS_PER_TRANSFER,Number of cached TRBs per transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "GHWPARAMS5,Global Hardware Parameters Register 5"
bitfld.long 0x14 22.--27. "DWC_USB3_DFQ_FIFO_DEPTH,Size of the BMU descriptor fetch request queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x14 16.--21. "DWC_USB3_DWQ_FIFO_DEPTH,Size of the BMU descriptor write queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x14 10.--15. "DWC_USB3_TXQ_FIFO_DEPTH,Size of the BMU Tx request queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x14 4.--9. "DWC_USB3_RXQ_FIFO_DEPTH,Size of the BMU Rx request queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x14 0.--3. "DWC_USB3_BMU_BUSGM_DEPTH,Depth of the BMU-BUSGM source/sink buffers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "GHWPARAMS6,Global Hardware Parameters Register 6"
hexmask.long.word 0x18 16.--31. 1. "DWC_USB3_RAM0_DEPTH,Total RAM0 depth"
bitfld.long 0x18 15. "BUSFLTRSSUPPORT,VBUS and IF related control inputs from the PHY filter addition" "Not added,Added"
newline
bitfld.long 0x18 12. "ADPSUPPORT,Internal ADP capability of the YSB 3.0 core enable" "Disabled,Enabled"
bitfld.long 0x18 11. "HNPSUPPORT,HNP support enabled" "Disabled,Enabled"
newline
bitfld.long 0x18 10. "SRPSUPPORT,SRP support enabled" "Disabled,Enabled"
bitfld.long 0x18 7. "DWC_USB3_EN_FPGA,Hardware validation/driver development with an FPGA platform" "No,Yes"
newline
bitfld.long 0x18 6. "DWC_USB3_EN_DBG_PORTS,FPGA hardware validation of the core" "No,Yes"
bitfld.long 0x18 0.--5. "DWC_USB3_PSQ_FIFO_DEPTH,Size of the BMU protocol status queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x1C "GHWPARAMS7,Global Hardware Parameters Register 7"
hexmask.long.word 0x1C 16.--31. 1. "DWC_USB3_RAM2_DEPTH,Total RAM2 depth"
hexmask.long.word 0x1C 0.--15. 1. "DWC_USB3_RAM1_DEPTH,Total RAM1 depth"
group.long 0xC180++0x07
line.long 0x00 "GPRTBIMAP_HSLO,Global High-Speed Port To Bus Instance Mapping Register - Low"
bitfld.long 0x00 0.--3. "BINUM1,HS USB instance number for port 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "GPRTBIMAP_HSHI,Global High-Speed Port To Bus Instance Mapping Register - High"
bitfld.long 0x04 0.--3. "BINUM9,HS USB instance number for port 9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
if (((per.l(ad:0x03100000+0xC118))&0x03)==0x00)
group.long 0xC200++0x03
line.long 0x00 "GUSB2PHYCFG,Global USB2 PHY Configuration Register"
bitfld.long 0x00 31. "PHYSOFTRST,UTMI PHY soft reset" "No reset,Reset"
rbitfld.long 0x00 30. "U2_FREECLK_EXISTS,USB 2.0 PHY free-running PHY clock exists" "No,Yes"
newline
bitfld.long 0x00 8. "ENBLKSLPM,Enable UTMI_SLEEP_N and UTMI_L1_SUSPEND_N" "Disabled,Enabled"
bitfld.long 0x00 6. "SUSPENDUSB20,Suspend USB2.0 HS/FS/LS PHY" "Not suspended,Suspended"
newline
bitfld.long 0x00 3. "PHYIF,PHY interface" "8-bit,16-bit"
else
group.long 0xC200++0x03
line.long 0x00 "GUSB2PHYCFG,Global USB2 PHY Configuration Register"
bitfld.long 0x00 31. "PHYSOFTRST,UTMI PHY soft reset" "No reset,Reset"
rbitfld.long 0x00 30. "U2_FREECLK_EXISTS,USB 2.0 PHY free-running PHY clock exists" "No,Yes"
newline
bitfld.long 0x00 22.--24. "LSTRD,LS turnaround time" "2-bit,2.5-bit,3-bit,3.5-bit,4-bit,4.5-bit,5-bit,5.5-bit"
bitfld.long 0x00 19.--21. "LSIPD,LS inter-packet time" "2-bit,2.5-bit,3-bit,3.5-bit,4-bit,4.5-bit,5-bit,5.5-bit"
newline
bitfld.long 0x00 8. "ENBLKSLPM,Enable UTMI_SLEEP_N and UTMI_L1_SUSPEND_N" "Disabled,Enabled"
bitfld.long 0x00 6. "SUSPENDUSB20,Suspend USB2.0 HS/FS/LS PHY" "Not suspended,Suspended"
newline
bitfld.long 0x00 3. "PHYIF,PHY interface" "8-bit,16-bit"
endif
group.long 0xC2C0++0x03
line.long 0x00 "GUSB3PIPECTL,Global USB 3.0 PIPE Control Register"
bitfld.long 0x00 31. "PHYSOFTRST,USB3 PHY soft reset" "No reset,Reset"
bitfld.long 0x00 29. "U2SSINACTP3OK,P3 OK for U2/SSInactive" "P2,P3"
newline
bitfld.long 0x00 28. "DISRXDETP3,Disabled receiver detection in P3" "No,Yes"
bitfld.long 0x00 25. "U1U2EXITFAIL_TO_RECOV,U1U2 exit fail to recovery" "Not failed,Failed"
newline
rbitfld.long 0x00 17. "SUSPENDENABLE,Suspend USB 3.0 SS PHY" "Disabled,?..."
rbitfld.long 0x00 15.--16. "DATWIDTH,PIPE data width" "32 bits,16 bits,8 bits,?..."
newline
bitfld.long 0x00 6. "TX_SWING,Tx swing" "0,1"
bitfld.long 0x00 3.--5. "TX_MARGIN,Tx margin[2:0]" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 1.--2. "TX_DE_EPPHASIS,Tx deemphasis" "0,1,2,3"
bitfld.long 0x00 0. "ELASTIC_BUFFER_MODE,Elastic buffer mode" "0,1"
repeat 4. (increment 0xC300 0x10)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "GTXFIFOSIZ_$2,Global Transmit FIFO Size Register $2"
hexmask.long.word 0x00 16.--31. 0x01 "TXFSTADDR_$2,Transmit FIFO$2 RAM start address"
hexmask.long.word 0x00 0.--15. 1. "TXFDEP_$2,TXFIFO depth"
repeat.end
repeat 3. (increment 0xC380 0x10)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "GRXFIFOSIZ_$2,Global Receive FIFO Size Register $2"
hexmask.long.word 0x00 16.--31. 0x01 "RXFSTADDR_$2,Receive FIFO$2 RAM start address"
hexmask.long.word 0x00 0.--15. 1. "RXFDEP_$2,RXFIFO depth"
repeat.end
group.long 0xC400++0x0F
line.long 0x00 "GEVNTADRLO,Global Event Buffer Address Low Register"
line.long 0x04 "GEVNTADRHI,Global Event Buffer Address High Register"
line.long 0x08 "GEVNTSIZ,Global Event Buffer Size Register"
bitfld.long 0x08 31. "EVNTINTRPTMASK,Event interrupt mask" "Not masked,Masked"
hexmask.long.word 0x08 0.--15. 1. "EVENTSIZ,Event buffer size in bytes"
line.long 0x0C "GEVNTCOUNT,Global Event Buffer Count Register"
hexmask.long.word 0x0C 0.--15. 1. "EVNTCOUNT,Event count"
rgroup.long 0xC600++0x03
line.long 0x00 "GHWPARAMS8,Global Hardware Parameters Register 8"
group.long 0xC610++0x03
line.long 0x00 "GTXFIFOPRIDEV,Global Device TXFIFO DMA Priority Register"
bitfld.long 0x00 0.--3. "GTXFIFOPRIDEV,Device TXFIFO priority" "Low,High,?..."
group.long 0xC618++0x07
line.long 0x00 "GTXFIFOPRIHST,Global Host TXFIFO DMA Priority Register"
bitfld.long 0x00 0.--2. "GTXFIFOPRIHST,Host TXFIFO priority" "Low,High,?..."
line.long 0x04 "GRXFIFOPRIHST,Global Host RXFIFO DMA Priority Register"
bitfld.long 0x04 0.--2. "GRXFIFOPRIHST,Host RXFIFO priority" "Low,High,?..."
group.long 0xC624++0x03
line.long 0x00 "GDMAHLRATIO,Global Host FIFO DMA High-Low Priority Ratio Register"
bitfld.long 0x00 8.--12. "HSTRXFIFO,Host RXFIFO DMA high-low priority ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "HSTTXFIFO,Host TXFIFO DMA high-low priority ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xC630++0x03
line.long 0x00 "GFLADJ,Global Frame Length Adjustment Register"
hexmask.long.word 0x00 8.--21. 1. "GFLADJ_REFCLK_FLADJ,Frame length adjustment to be applied"
bitfld.long 0x00 7. "GFLADJ_30MHZ_REG_SEL,Value in GFLADJ_30MHZ usage" "Not used,Used"
newline
bitfld.long 0x00 0.--5. "GFLADJ_30MHZ,Value used for frame length adjustment" "59488,59504,59520,59536,59552,59568,59584,59600,59616,59632,59648,59664,59680,59696,59712,59728,59744,59760,59776,59792,59808,59824,59840,59856,59872,59888,59904,59920,59936,59952,59968,59984,60000,60016,60032,60048,60064,60080,60096,60112,60128,60144,60160,60176,60192,60208,60224,60240,60256,60272,60288,60304,60320,60336,60352,60368,60384,60400,60416,60432,60448,60464,60480,60496"
group.long 0xC700++0x03
line.long 0x00 "DCFG,Device Configuration Register"
bitfld.long 0x00 23. "IGMSTRMPP,Ignore stream PP" "Not ignored,Ignored"
bitfld.long 0x00 22. "LPMCAP,LPM capable" "Not capable,Capable"
newline
bitfld.long 0x00 17.--21. "NUMP,Number of receive buffers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--16. "INTRNUM,Interrupt number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
hexmask.long.word 0x00 3.--9. 0x08 "DEVADDR,Device address"
bitfld.long 0x00 0.--2. "DEVSPD,Device speed" "HS,FS,,,SS,?..."
if (((per.l(ad:0x03100000+0xC700))&0x07)==0x04)
group.long 0xC704++0x03
line.long 0x00 "DCTL,Device Control Register"
bitfld.long 0x00 31. "RUN_STOP,Device controller operation" "Stopped,Started"
bitfld.long 0x00 30. "CSFTRST,Core soft reset" "No reset,Reset"
newline
bitfld.long 0x00 24.--28. "HIRDTHRES,HIRD threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20.--23. "LPM_NYET_THRES,LPM NYET threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 17. "CRS,Controller restore state" "0,1"
bitfld.long 0x00 16. "CSS,Controller save state" "0,1"
newline
bitfld.long 0x00 12. "INITU2ENA,Initiate U2 enable" "Disabled,Enabled"
bitfld.long 0x00 11. "ACCEPTU2ENA,Accept U2 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "INITU1ENA,Initiate U1 enable" "Disabled,Enabled"
bitfld.long 0x00 9. "ACCEPTU1ENA,Accept U1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5.--8. "ULSTCHNGREQ,USB/link state change request" "No action,,,,SS.Disabled,Rx.Detect,SS.Inactive,,Recovery,?..."
bitfld.long 0x00 1.--4. "TSTCTL,Test control" "Disabled,J mode,K mode,SE0_NAK mode,Packet mode,Force_enable,?..."
else
group.long 0xC704++0x03
line.long 0x00 "DCTL,Device Control Register"
bitfld.long 0x00 31. "RUN_STOP,Device controller operation start" "Stopped,Started"
bitfld.long 0x00 30. "CSFTRST,Core soft reset" "No reset,Reset"
newline
bitfld.long 0x00 24.--28. "HIRDTHRES,HIRD threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20.--23. "LPM_NYET_THRES,LPM NYET threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 17. "CRS,Controller restore state" "0,1"
bitfld.long 0x00 16. "CSS,Controller save state" "0,1"
newline
bitfld.long 0x00 12. "INITU2ENA,Initiate U2 enable" "Disabled,Enabled"
bitfld.long 0x00 11. "ACCEPTU2ENA,Accept U2 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "INITU1ENA,Initiate U1 enable" "Disabled,Enabled"
bitfld.long 0x00 9. "ACCEPTU1ENA,Accept U1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5.--8. "ULSTCHNGREQ,USB/link state change request" ",,,,,,,,Remote wakeup,?..."
bitfld.long 0x00 1.--4. "TSTCTL,Test control" "Disabled,J mode,K mode,SE0_NAK mode,Packet mode,Force_enable,?..."
endif
group.long 0xC708++0x03
line.long 0x00 "DEVTEN,Device Event Enable Register"
bitfld.long 0x00 12. "VENDEVTTSTRCVDEN,Vendor device test LMP received rvent" "Disabled,Enabled"
bitfld.long 0x00 9. "ERRTICERREVTEN,Erratic error event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "SOFTEVTEN,Start of frame enable" "Disabled,Enabled"
bitfld.long 0x00 6. "U3L2L1SUSPEN,U3/L2-L1 suspend event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "WKUPEVTEN,Resume/remote wakeup detected event enable" "Disabled,Enabled"
bitfld.long 0x00 3. "ULSTCNGEN,USB/link state change event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "CONNECTDONEEVTEN,Connection done enable" "Disabled,Enabled"
bitfld.long 0x00 1. "USBRSTEVTEN,USB reset enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DISSCONNEVTEN,Disconnect detected event enable" "Disabled,Enabled"
if (((per.l(ad:0x03100000+0xC700))&0x07)==0x04)
rgroup.long 0xC70C++0x03
line.long 0x00 "DSTS,Device Status Register"
bitfld.long 0x00 25. "RSS,Restore state status" "0,1"
bitfld.long 0x00 24. "SSS,Save state status" "0,1"
newline
bitfld.long 0x00 23. "COREIDLE,Core idle" "Not idle,Idle"
bitfld.long 0x00 22. "DEVCTRLHLT,Device controller halted" "Not halted,Halted"
newline
bitfld.long 0x00 18.--21. "USBLNKST,USB/link state" "U0,U1,U2,U3,SS_DIS,RX_DET,SS_INACT,POLL,RECOV,HRESET,CMPLY,LPBK,Resume/Reset,?..."
bitfld.long 0x00 17. "RXFIFOEMPTY,RXFIFO empty" "Not empty,Empty"
newline
hexmask.long.word 0x00 3.--16. 1. "SOFFN[1],Frame/microframe number of the received SOF"
bitfld.long 0x00 0.--2. "CONNECTSPD,Connected speed" "HS,FS(30/60MHz),LS,FS(48MHz),SS,?..."
else
rgroup.long 0xC70C++0x03
line.long 0x00 "DSTS,Device Status Register"
bitfld.long 0x00 25. "RSS,Restore state status" "0,1"
bitfld.long 0x00 24. "SSS,Save state status" "0,1"
newline
bitfld.long 0x00 23. "COREIDLE,Core idle" "Not idle,Idle"
bitfld.long 0x00 22. "DEVCTRLHLT,Device controller halted" "Not halted,Halted"
newline
bitfld.long 0x00 18.--21. "USBLNKST,USB/link state" "On,,L1 sleep,L2 suspend,Disconnected,?..."
bitfld.long 0x00 17. "RXFIFOEMPTY,RXFIFO empty" "Not empty,Empty"
newline
hexmask.long.word 0x00 3.--16. 1. "SOFFN[1],Frame/microframe number of the received SOF"
bitfld.long 0x00 0.--2. "CONNECTSPD,Connected speed" "HS,FS(30/60MHz),LS,FS(48MHz),SS,?..."
endif
group.long 0xC710++0x07
line.long 0x00 "DGCMDPAR,Device Generic Command Parameter Register"
line.long 0x04 "DGCMD,Device Generic Command Register"
rbitfld.long 0x04 12.--15. "CMDSTATUS,Command status" "Succeed,CmdErr,?..."
bitfld.long 0x04 10. "CMDACT,Command active" "Not active,Active"
newline
bitfld.long 0x04 8. "CMDIOC,Command interrupt on complete" "No interrupt,Interrupt"
hexmask.long.byte 0x04 0.--7. 1. "CMDTYP,Command type"
group.long 0xC720++0x03
line.long 0x00 "DALEPENA,Device Active USB Endpoint Enable Register"
bitfld.long 0x00 7. "USBACTEP[7],USB endpoint 3 IN active" "Not active,Active"
bitfld.long 0x00 6. "[6],USB endpoint 3 OUT active" "Not active,Active"
newline
bitfld.long 0x00 5. "[5],USB endpoint 2 IN active" "Not active,Active"
bitfld.long 0x00 4. "[4],USB endpoint 2 OUT active" "Not active,Active"
newline
bitfld.long 0x00 3. "[3],USB endpoint 1 IN active" "Not active,Active"
bitfld.long 0x00 2. "[2],USB endpoint 1 OUT active" "Not active,Active"
newline
bitfld.long 0x00 1. "[1],USB endpoint 0 IN active" "Not active,Active"
bitfld.long 0x00 0. "[0],USB endpoint 0 OUT active" "Not active,Active"
repeat 8. (increment 0xC800 0x10)(increment 0. 1.)
group.long $1++0x0F
line.long 0x00 "DEPCMDPAR2_$2,Device Physical Endpoint-$2 Command Parameter 2 Register"
line.long 0x04 "DEPCMDPAR1_$2,Device Physical Endpoint-$2 Command Parameter 1 Register"
line.long 0x08 "DEPCMDPAR0_$2,Device Physical Endpoint-$2 Command Parameter 0 Register"
line.long 0x0C "DEPCMD_$2,Device Physical Endpoint-$2 Command Register"
hexmask.long.word 0x0C 16.--31. 1. "COMMANDPARAM,Command parameters"
bitfld.long 0x0C 12.--15. "CMDSTATUS,Command completion status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x0C 11. "HIPRI_FORCERM,High priority/force RM" "0,1"
bitfld.long 0x0C 10. "CMDACT,Command active" "Not active,Active"
newline
bitfld.long 0x0C 8. "CMDIOC,Command interrupt on complete" "No interrupt,Interrupt"
bitfld.long 0x0C 0.--3. "CMDTYP,Command type" ",Set ep configuration,Set ep transfer resource configuration,Get ep state,Set stall,Clear stall,Start transfer,Update transfer,End transfer,Start new configuration,?..."
repeat.end
group.long 0xCC00++0x07
line.long 0x00 "OCFG,OTG Configuration Register"
bitfld.long 0x00 5. "DISPRTPWRCUTOFF,OTG disable port power cut off" "Cut off,VBUS ON"
bitfld.long 0x00 3. "OTGSFTRSTMSK,OTG soft reset mask" "Resets OTG,Masked from OTG"
newline
bitfld.long 0x00 1. "HNPCAP,HNP capability" "Disabled,Enabled"
bitfld.long 0x00 0. "SRPCAP,SRP capability" "Disabled,Enabled"
line.long 0x04 "OCTL,OTG Control Register"
bitfld.long 0x04 6. "PERIMODE,Peripheral mode" "Host,Peripheral"
bitfld.long 0x04 5. "PRTPWRCTL,Port power control" "Disabled,Enabled"
newline
bitfld.long 0x04 4. "HNPREQ,HNP request" "No request,Request"
bitfld.long 0x04 3. "SESREQ,Session request" "No request,Request"
newline
bitfld.long 0x04 2. "TERMSELDLPULSE,TermSel DLine pulsing selection" "Utmi_txvalid,Utmi_termsel"
bitfld.long 0x04 1. "DEVSETHNPEN,Device set HNP enable" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "HSTSETHNPEN,Host set HNP enable" "Disabled,Enabled"
if (((per.l(ad:0x03100000+0xCC08))&0x80000000)==0x00)
group.long 0xCC08++0x03
line.long 0x00 "OEVT,OTG Events Register"
rbitfld.long 0x00 31. "DEVICEMODE,Device is in A-device or B-device mode" "A-device,B-device"
bitfld.long 0x00 27. "OTGXHCIRUNSTPSETEVNT,OTG host run stop set event" "Not occurred,Occurred"
newline
bitfld.long 0x00 26. "OTGDEVRUNSTPSETEVNT,OTG device run stop set event" "Not occurred,Occurred"
bitfld.long 0x00 24. "OTGCONIDSTSCHNGEVNT,Connector ID status change event" "Not occurred,Occurred"
newline
bitfld.long 0x00 21. "OTGADEVIDLEEVNT,A-device A-IDLE event" "Not occurred,Occurred"
bitfld.long 0x00 20. "OTGADEVBHOSTENDEVNT,A-device B-Host end event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
bitfld.long 0x00 19. "OTGADEVHOSTEVNT,A-device host event applicable for OTG 2.0 mode" "Not occurred,Occurred"
bitfld.long 0x00 18. "OTGADEVHNPCHNGEVNT,A-Dev HNP change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
bitfld.long 0x00 17. "OTGADEVSRPDETEVNT,SRP detect event applicable for OTG 2.0 mode" "Not occurred,Occurred"
bitfld.long 0x00 16. "OTGADEVSESSENDDETEVNT,Session end detected event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 11. "OTGBDEVBHOSTENDEVNT,B-Device B-Host end event applicable for OTG 2.0 mode" "Not occurred,Occurred"
rbitfld.long 0x00 10. "OTGBDEVHNPCHNGEVNT,B-device HNP change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 9. "OTGBDEVSESSVLDDETEVNT,Session valid detected event applicable for OTG 2.0 mode" "Not occurred,Occurred"
rbitfld.long 0x00 8. "OTGBDEVVBUSCHNGEVNT,VBUS change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 3. "BSESVLD,B-Session valid applicable for OTG 2.0 mode" "Not valid,Valid"
rbitfld.long 0x00 2. "HSTNEGSTS,Host negotiation status applicable for OTG 2.0 mode" "Failure,Success"
newline
rbitfld.long 0x00 1. "SESREQSTS,Session request status" "Not requested,Requested"
bitfld.long 0x00 0. "OEVTERROR,OTG event error" "No error,Error"
else
group.long 0xCC08++0x03
line.long 0x00 "OEVT,OTG Events Register"
rbitfld.long 0x00 31. "DEVICEMODE,Device is in A-device or B-device mode" "A-device,B-device"
bitfld.long 0x00 27. "OTGXHCIRUNSTPSETEVNT,OTG host run stop set event" "Not occurred,Occurred"
newline
bitfld.long 0x00 26. "OTGDEVRUNSTPSETEVNT,OTG device run stop set event" "Not occurred,Occurred"
bitfld.long 0x00 24. "OTGCONIDSTSCHNGEVNT,Connector ID status change event" "Not occurred,Occurred"
newline
rbitfld.long 0x00 21. "OTGADEVIDLEEVNT,A-device A-IDLE event" "Not occurred,Occurred"
rbitfld.long 0x00 20. "OTGADEVBHOSTENDEVNT,A-device B-Host end event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 19. "OTGADEVHOSTEVNT,A-device host event applicable for OTG 2.0 mode" "Not occurred,Occurred"
rbitfld.long 0x00 18. "OTGADEVHNPCHNGEVNT,A-Dev HNP change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 17. "OTGADEVSRPDETEVNT,SRP detect event applicable for OTG 2.0 mode" "Not occurred,Occurred"
rbitfld.long 0x00 16. "OTGADEVSESSENDDETEVNT,Session end detected event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
bitfld.long 0x00 11. "OTGBDEVBHOSTENDEVNT,B-Device B-Host end event applicable for OTG 2.0 mode" "Not occurred,Occurred"
bitfld.long 0x00 10. "OTGBDEVHNPCHNGEVNT,B-device HNP change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. "OTGBDEVSESSVLDDETEVNT,Session valid detected event applicable for OTG 2.0 mode" "Not occurred,Occurred"
bitfld.long 0x00 8. "OTGBDEVVBUSCHNGEVNT,VBUS change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 3. "BSESVLD,B-Session valid applicable for OTG 2.0 mode" "Not valid,Valid"
rbitfld.long 0x00 2. "HSTNEGSTS,Host negotiation status applicable for OTG 2.0 mode" "Failure,Success"
newline
rbitfld.long 0x00 1. "SESREQSTS,Session request status" "Not requested,Requested"
bitfld.long 0x00 0. "OEVTERROR,OTG event error" "No error,Error"
endif
group.long 0xCC0C++0x07
line.long 0x00 "OEVTEN,OTG Events Enable Register"
bitfld.long 0x00 27. "OTGXHCIRUNSTPSETEVNTEN,OTG host run stop set event enable" "Disabled,Enabled"
bitfld.long 0x00 26. "OTGDEVRUNSTPSETEVNTEN,OTG device run stop set event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 24. "OTGCONIDSTSCHNGEVNTEN,Connector ID status change event enable" "Disabled,Enabled"
bitfld.long 0x00 23. "HRRCONFNOTIFEVNTEN,HRRCONFNOTIF event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 22. "HRRINITNOTIFEVNTEN,HRRINITNOTIF event enable" "Disabled,Enabled"
bitfld.long 0x00 21. "OTGADEVIDLEEVNTEN,A-device A-IDLE event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 20. "OTGADEVBHOSTENDEVNTEN,A-device B-host end event enable" "Disabled,Enabled"
bitfld.long 0x00 19. "OTGADEVHOSTEVNTEN,A-device host event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. "OTGADEVHNPCHNGEVNTEN,A-Device HNP change event enable" "Disabled,Enabled"
bitfld.long 0x00 17. "OTGADEVSRPDETEVNTEN,SRP detect event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "OTGADEVSESSENDDETEVNTEN,Session end detected event enable" "Disabled,Enabled"
bitfld.long 0x00 11. "OTGBDEVBHOSTENDEVNTEN,B-device B-host end event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "OTGBDEVHNPCHNGEVNTEN,B-device HNP change event enable" "Disabled,Enabled"
bitfld.long 0x00 9. "OTGBDEVSESSVLDDETEVNTEN,Session valid detected event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "OTGBDEVVBUSCHNGEVNTEN,VBUS change event enable" "Disabled,Enabled"
line.long 0x04 "OSTS,OTG Status Register"
bitfld.long 0x04 13. "DEVRUNSTP,Status of the DCTL[RUN_STOP] bit" "0,1"
bitfld.long 0x04 12. "XHCIRUNSTP,OTG host run stop set event" "Not occurred,Occurred"
newline
bitfld.long 0x04 4. "PERIPHERALSTATE,Activity of core" "Host,Peripheral"
bitfld.long 0x04 3. "XHCIPRTPOWER,PORTSC[PP] bit in the xHCI register" "0,1"
newline
bitfld.long 0x04 2. "BSESVLD,B-session valid" "Not valid,Valid"
bitfld.long 0x04 1. "ASESVLD,VBUS valid" "Not valid,Valid"
newline
bitfld.long 0x04 0. "CONIDSTS,Connector ID status" "A-device,B-device"
group.long 0xCC20++0x0F
line.long 0x00 "ADPCFG,ADP Configuration Register"
bitfld.long 0x00 30.--31. "PRBPER,Probe period" "0.775 sec,1.55 sec,2.275 sec,?..."
bitfld.long 0x00 28.--29. "PRBDELTA,Probe delta" "1 cycle,2 cycles,3 cycles,4 cycles"
newline
bitfld.long 0x00 26.--27. "PRBDSCHG,Probe discharge" "4 ms,8 ms,16 ms,32 ms"
line.long 0x04 "ADPCTL,ADP Control Register"
bitfld.long 0x04 28. "ENAPRB,Enable probe" "Disabled,Enabled"
bitfld.long 0x04 27. "ENASNS,Enable sense" "Disabled,Enabled"
newline
bitfld.long 0x04 26. "ADPEN,ADP enable" "Disabled,Enabled"
bitfld.long 0x04 25. "ADPRES,ADP reset" "No reset,Reset"
newline
rbitfld.long 0x04 24. "WB,Write busy" "Completed,In progress"
line.long 0x08 "ADPEVT,ADP Event Register"
bitfld.long 0x08 28. "ADPPRBEVNT,ADP probe event" "0,1"
bitfld.long 0x08 27. "ADPSNSEVNT,ADP sense event" "0,1"
newline
bitfld.long 0x08 26. "ADPTMOUTEVNT,ADP timeout event" "Not completed,Completed"
bitfld.long 0x08 25. "ADPRSTCMPLTEVNT,ADP reset complete event" "Not completed,Completed"
newline
hexmask.long.word 0x08 0.--15. 1. "RTIM,Ramp time"
line.long 0x0C "ADPEVTEN,ADP Event Enable Register"
bitfld.long 0x0C 28. "ADPPRBEVNTEN,ADP probe event enable" "Disabled,Enabled"
bitfld.long 0x0C 27. "ADPSNSEVNTEN,ADP sense event enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 26. "ADPTMOUTEVNTEN,ADP timeout event enable" "Disabled,Enabled"
bitfld.long 0x0C 25. "ADPRSTCMPLTEVNTEN,ADP reset complete event enable" "Disabled,Enabled"
tree.end
tree "USBC1_PHY_SS"
base ad:0x704600000
rgroup.word 0x00++0x03
line.word 0x00 "SUP_IDCODE_LO,SUP_IDCODE_LO"
line.word 0x02 "SUP_IDCODE_HI,SUP_IDCODE_HI"
group.word 0x60++0x01
line.word 0x00 "MPLL_LOOP_CTL,MPLL_LOOP_CTL"
bitfld.word 0x00 4.--7. "PROP_CNTRL,Charge pump proportional current setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.word 0x200C++0x01
line.word 0x00 "LANE0_RX_OVRD_IN_HI,LANE0_RX_OVRD_IN_HI"
bitfld.word 0x00 11. "RX_EQ_OVRD,Override value for RX_EQ" "0,1"
bitfld.word 0x00 8.--10. "RX_EQ,Override value for RX_EQ" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 7. "RX_EQ_EN_OVRD,Override enable for RX_EQ_EN" "0,1"
bitfld.word 0x00 6. "RX_EQ_EN,Override value for RX_EQ_EN" "0,1"
tree.end
tree "USBC2"
base ad:0x03110000
rgroup.long 0x00++0x1F
line.long 0x00 "CAPLENGTH,Capability Registers Length And HC Interface Version Number"
hexmask.long.word 0x00 16.--31. 1. "HCIVERSION,HC interface version number"
hexmask.long.byte 0x00 0.--7. 1. "CAPLENGTH,Capability registers length"
line.long 0x04 "HCSPARAMS1,Host Controller Structural Parameters 1"
hexmask.long.byte 0x04 24.--31. 1. "MAXPORTS,Maximum number of ports set as 2"
hexmask.long.word 0x04 8.--18. 1. "MAXINTRS,Number of interrupters set as 1"
newline
hexmask.long.byte 0x04 0.--7. 1. "MAXSLOTS,Number of device slots set as 127"
line.long 0x08 "HCSPARAMS2,Host Controller Structural Parameters 2"
bitfld.long 0x08 27.--31. "MAXSCRATCHPADBUFS,Max scratchpad buffers set as 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x08 26. "SPR,Scratchpad restore" "Not restored,Restored"
newline
bitfld.long 0x08 21.--25. "MAXCRATCHPADBUFS_HI,Max scratchpad buffers high" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x08 4.--7. "ERSTMAX,Event ring segment table max set as 15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x08 0.--3. "IST,Isochronous scheduling threshold set as 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x0C "HCSPARAMS3,Host Controller Structural Parameters 3"
hexmask.long.word 0x0C 16.--31. 1. "U2_DEVICE_EXIT_LAT,U2 device exit latency set as 32'h7FF"
hexmask.long.byte 0x0C 0.--7. 1. "U1_DEVICE_EXIT_LAT,U1 device exit latency set as 32'hA"
line.long 0x10 "HCCPARAMS1,Host Controller Capability Parameters 1"
hexmask.long.word 0x10 16.--31. 0x01 "XECP,xHCI extended capabilities pointer set as 544"
bitfld.long 0x10 12.--15. "MAXPSASIZE,Maximum primary stream array size set as 15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x10 11. "CFC,Contiguous frame ID capability" "Not capable,Capable"
bitfld.long 0x10 10. "SEC,Stopper EDLTA capability" "Not capable,Capable"
newline
bitfld.long 0x10 9. "SPC,Short packet capability" "Not capable,Capable"
bitfld.long 0x10 8. "PAE,Parse all event data" "Not parsed,Parsed"
newline
bitfld.long 0x10 7. "NSS,No secondary SID support" "No,Yes"
bitfld.long 0x10 6. "LTC,Latency tolerance messaging capability" "Not capable,Capable"
newline
bitfld.long 0x10 5. "LHRC,Light HC reset capability" "Not capable,Capable"
bitfld.long 0x10 4. "PIND,Port indicators" "Low,High"
newline
bitfld.long 0x10 3. "PPC,Port power control" "Low,High"
bitfld.long 0x10 2. "CSZ,Context size" "Low,High"
newline
bitfld.long 0x10 1. "BNC,BW negotiation capability" "Not capable,Capable"
bitfld.long 0x10 0. "AC64,64-bit addressing capability" "Not capable,Capable"
line.long 0x14 "DBOFF,Doorbell Offset"
hexmask.long 0x14 2.--31. 0x04 "DOORBELL_ARRAY_OFFSET,Doorbell array offset set as 1152"
line.long 0x18 "RTSOFF,Runtime Register Space Offset"
hexmask.long 0x18 5.--31. 0x20 "RUNTIME_REG_SPACE_OFFSET,Runtime register space offset set as 1088"
line.long 0x1C "HCCPARAMS2,Host Controller Capability Parameters 2"
bitfld.long 0x1C 5. "CIC,Configuration information capability" "Not capable,Capable"
bitfld.long 0x1C 4. "LEC,Large ESIT payload capability" "Not capable,Capable"
newline
bitfld.long 0x1C 3. "CTC,Compliance transition capability" "Not capable,Capable"
bitfld.long 0x1C 2. "FSC,Force save context capability" "Not capable,Capable"
newline
bitfld.long 0x1C 1. "CMC,Configure endpoint command max exit latency too large capability" "Not capable,Capable"
bitfld.long 0x1C 0. "U3C,U3 entry capability" "Not capable,Capable"
group.long 0xC100++0x07
line.long 0x00 "GSBUSCFG0,Global SoC Bus Configuration Register 0"
bitfld.long 0x00 28.--31. "DATRDREQINF,AXI-cache for data read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 24.--27. "DESRDREQINF,AXI-cache for descriptor read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 20.--23. "DATWRREQINF,AXI-cache for data write" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 16.--19. "DESWRREQINF,AXI-cache for descriptor write" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 3. "INCR16BRSTENA,INCR16 burst type enable" "Disabled,Enabled"
bitfld.long 0x00 2. "INCR8BRSTENA,INCR 8 burst type enable" "Disabled,Enabled"
newline
bitfld.long 0x00 1. "INCR4BRSTENA,INCR 4 burst type enable" "Disabled,Enabled"
bitfld.long 0x00 0. "INCRBRSTENA,Undefined length INCR burst type enable" "Disabled,Enabled"
line.long 0x04 "GBUSCFG1,Global SoC Bus Configuration Register 1"
bitfld.long 0x04 12. "EN1KPAGE,1K page boundary enable" "Disabled,Enabled"
bitfld.long 0x04 8.--11. "PIPETRANSLIMIT,AXI pipelined transfers burst request limit" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
if (((per.l(ad:0x03110000+0xC118))&0x03)==0x01)
group.long 0xC108++0x03
line.long 0x00 "GTXTHRCFG,Global Tx Threshold Control Register"
bitfld.long 0x00 29. "USBTXPKTCNTSEL,USB transmit packet count enable" "Disabled,Enabled"
bitfld.long 0x00 24.--27. "USBTXPKTCNT,USB transmit packet count" ",1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
hexmask.long.byte 0x00 16.--23. 1. "USBMAXTXBURSTSIZE,USB maximum Tx burst size"
else
hgroup.long 0xC108++0x03
hide.long 0x00 "GTXTHRCFG,Global Tx Threshold Control Register"
endif
if (((per.l(ad:0x03110000+0xC118))&0x03)==0x01)
if (((per.l(ad:0x03110000+0xC10C))&0x20000000)==0x20000000)
group.long 0xC10C++0x03
line.long 0x00 "GRXTHRCFG,Global RX Threshold Control Register"
bitfld.long 0x00 29. "USBRXPKTCNTSEL,USB receive packet count enable" "Disabled,Enabled"
bitfld.long 0x00 24.--27. "USBRXPKTCNT,USB receive packet count" ",1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 19.--23. "USBMAXRXBURSTSIZE,USB maximum receive burst size" ",1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
else
group.long 0xC10C++0x03
line.long 0x00 "GRXTHRCFG,Global RX Threshold Control Register"
bitfld.long 0x00 29. "USBRXPKTCNTSEL,USB receive packet count enable" "Disabled,Enabled"
endif
else
hgroup.long 0xC10C++0x03
hide.long 0x00 "GRXTHRCFG,Global RX Threshold Control Register"
endif
if (((per.l(ad:0x03110000+0xC118))&0x03)==0x00)
if (((per.l(ad:0x03110000+0xC700))&0x07)==(0x04||0x00))
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 16. "U2RSTECN,SuperSpeed mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 14.--15. "FRMSCLDWN,View of a SoF/USOF/ITP scale down SS HS" "125us,62.5us,31.25us,15.625us"
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
newline
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
newline
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
newline
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
elif (((per.l(ad:0x03110000+0xC700))&0x07)==0x01)
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 16. "U2RSTECN,SuperSpeed mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 14.--15. "FRMSCLDWN,View of a SoF/USOF/ITP scale down FS" "1024b,512b,256b,128b"
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
newline
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
newline
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
newline
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
else
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 16. "U2RSTECN,SuperSpeed mode enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
newline
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
newline
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
endif
else
if (((per.l(ad:0x03110000+0xC700))&0x07)==(0x04||0x00))
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 14.--15. "FRMSCLDWN,View of a SoF/USOF/ITP scale down SS HS" "125us,62.5us,31.25us,15.625us"
newline
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
newline
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
newline
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
elif (((per.l(ad:0x03110000+0xC700))&0x07)==0x01)
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 14.--15. "FRMSCLDWN,View of a SoF/USOF/ITP scale down FS" "1024b,512b,256b,128b"
newline
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
newline
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
newline
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
else
group.long 0xC110++0x03
line.long 0x00 "GCTL,Global Core Control Register"
hexmask.long.word 0x00 19.--31. 1. "PWRDNSCALE,Power down scale"
bitfld.long 0x00 18. "MASTERFILTBYPASS,Master filter bypass" "Not bypassed,Bypassed"
newline
bitfld.long 0x00 17. "BYPSSETADDR,Bypass SetAddress in device mode" "Not bypassed,Bypassed"
bitfld.long 0x00 12.--13. "PRTCAPDIR,Port capability direction" ",Host,Device,?..."
newline
bitfld.long 0x00 11. "CORESOFTRESET,Core soft reset" "No reset,Reset"
rbitfld.long 0x00 10. "SOFITPSYNC,SOFITPSYNC" "0,1"
newline
bitfld.long 0x00 6.--7. "RAMCLKSEL,RAM clock select" "Bus,Pipe,Pipe/2,?..."
bitfld.long 0x00 3. "DISSCRAMBLE,Disable scrambling" "No,Yes"
newline
bitfld.long 0x00 2. "U2EXIT_LFPS,link 8us wait before valid U2 exit detection" "Disabled,Enabled"
bitfld.long 0x00 0. "DSBLCLKGTNG,Disable clock gating" "No,Yes"
endif
endif
group.long 0xC118++0x03
line.long 0x00 "GSTS,Global Status Register"
rbitfld.long 0x00 10. "OTG_IP,OTG interrupt pending" "Not pending,Pending"
rbitfld.long 0x00 7. "HOST_IP,Host interrupt pending" "Not pending,Pending"
newline
rbitfld.long 0x00 6. "DEVICE_IP,Device interrupt pending" "Not pending,Pending"
bitfld.long 0x00 5. "CSRTIMEOUT,CSR timeout" "No timeout,Timeout"
newline
bitfld.long 0x00 4. "BUSERRADDRVLD,Bus error address valid" "Not valid,Valid"
rbitfld.long 0x00 0.--1. "CURMOD,Current mode of operation" "Device,Host,?..."
if (((per.l(ad:0x03110000+0xC118))&0x03)==0x00)
group.long 0xC11C++0x03
line.long 0x00 "GUCTL1,Global User Control Register 1"
bitfld.long 0x00 29. "FILTER_SE0_FSLS_EOP,Filter SE0 for 2 clock for detecting EOP enable" "Disabled,Enabled"
bitfld.long 0x00 28. "TX_IPGAP_LINECHECK_DIS,2.0 MAC linestate check during HS transmit disable" "No,Yes"
newline
bitfld.long 0x00 27. "DEV_TRB_OUT_SPR_IND,OUT TRB status short packet indication enable" "Disabled,Enabled"
bitfld.long 0x00 26. "DEV_FORCE_20_CLK_FOR_30_CLK,UTMI clock route as the pipe3 clock enable" "Disable,Enabled"
newline
bitfld.long 0x00 25. "P3_IN_U2,P3 power state enable" "Disabled,Enabled"
bitfld.long 0x00 24. "DEV_L1_EXIT_BY_HW,Device controlled sending remote wakeup for L1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 21.--23. "IP_GAP_ADD_ON,Inter packet gap add on" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 20. "DEV_LSP_TAIL_LOCK_DIS,Bug fix for STAR 9000716195 disable" "No,Yes"
newline
bitfld.long 0x00 19. "NAK_PER_ENH_FS,Performance enhancement for FS async endpoints enable" "Disabled,Enabled"
bitfld.long 0x00 18. "NAK_PER_ENH_HS,Performance enhancement for HS async endpoints enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4.--7. "L1_SUSP_THRLD_FOR_HOST,L1 suspend threshold for host" ",,,,,L1 suspend,L2 suspend,,,,,L1 sleep,,,,Normal working"
bitfld.long 0x00 2. "HC_PARCHK_DISABLE,Host parameter check disable" "No,Yes"
newline
bitfld.long 0x00 1. "OVRLD_L1_SUSP_COM,Overload L1 suspend communication port" "No overload,Overload"
else
group.long 0xC11C++0x03
line.long 0x00 "GUCTL1,Global User Control Register 1"
bitfld.long 0x00 29. "FILTER_SE0_FSLS_EOP,Filter SE0 for 2 clock for detecting EOP enable" "Disabled,Enabled"
bitfld.long 0x00 28. "TX_IPGAP_LINECHECK_DIS,2.0 MAC linestate check during HS transmit disable" "No,Yes"
newline
bitfld.long 0x00 25. "P3_IN_U2,P3 power state enable" "Disabled,Enabled"
bitfld.long 0x00 21.--23. "IP_GAP_ADD_ON,Inter packet gap add on" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 20. "DEV_LSP_TAIL_LOCK_DIS,Bug fix for STAR 9000716195 disable" "No,Yes"
bitfld.long 0x00 19. "NAK_PER_ENH_FS,Performance enhancement for FS async endpoints enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. "NAK_PER_ENH_HS,Performance enhancement for HS async endpoints enable" "Disabled,Enabled"
bitfld.long 0x00 16. "PARKMODE_DISABLE_HS,All HS bus instances park mode disable" "No,Yes"
newline
bitfld.long 0x00 8. "L1_SUSP_THRLD_EN_FOR_HOST,L1 suspend threshold enable for host" "Disabled,Enabled"
bitfld.long 0x00 4.--7. "L1_SUSP_THRLD_FOR_HOST,L1 suspend threshold for host" ",,,,,L1 suspend,L2 suspend,,,,,L1 sleep,,,,Normal work"
newline
bitfld.long 0x00 3. "HC_ERRATA_ENABLE,Host ELD enable" "Disabled,Enabled"
bitfld.long 0x00 2. "HC_PARCHK_DISABLE,Host parameter check disable" "No,Yes"
newline
bitfld.long 0x00 1. "OVRLD_L1_SUSP_COM,Overload L1 suspend communication port" "No overload,Overload"
bitfld.long 0x00 0. "LOA_FILTER_EN,USB 2.0 port babble three times check enable" "Disabled,Enabled"
endif
group.long 0xC128++0x03
line.long 0x00 "GUID,Global User ID Register"
if (((per.l(ad:0x03110000+0xC118))&0x03)==0x00)
group.long 0xC12C++0x03
line.long 0x00 "GUCTL,Global User Control Register"
hexmask.long.word 0x00 22.--31. 1. "REFCLKPER,period of ref_clk in nano seconds indication"
bitfld.long 0x00 21. "NOEXTRDI,No extra delay between SOF and the first packet" "Delay,No delay"
newline
bitfld.long 0x00 17. "SPRSCTRLTRANSEN,Sparse control transaction enable" "Disabled,Enabled"
bitfld.long 0x00 14. "USBHSTINAUTORETRYEN,Host IN auto retry" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "ENOVERLAPCHK,Enable check for LFPS overlap during remote Ux exit" "Disabled,Enabled"
bitfld.long 0x00 12. "EXTCAPSUPTEN,External extended capability support enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "NSRTEXTRFSBODI,Insert extra delay between FS bulk" "Not inserted,Inserted"
bitfld.long 0x00 9.--10. "DTCT,Device timeout coarse tuning" "0us,500us,1.5us,6.5us"
newline
hexmask.long.word 0x00 0.--8. 1. "DTFT,Device timeout fine tuning"
else
group.long 0xC12C++0x03
line.long 0x00 "GUCTL,Global User Control Register"
hexmask.long.word 0x00 22.--31. 1. "REFCLKPER,period of ref_clk in nano seconds indication"
bitfld.long 0x00 21. "NOEXTRDI,No extra delay between SOF and the first packet" "Delay,No delay"
newline
bitfld.long 0x00 17. "SPRSCTRLTRANSEN,Sparse control transaction enable" "Disabled,Enabled"
bitfld.long 0x00 16. "RESBWHSEPS,Reserving 85% bandwidth for HS periodic EPs" "80%,85%"
newline
bitfld.long 0x00 15. "CMDEVADDR,Compliance mode for device address" "Equal to slot ID,Increment on command"
bitfld.long 0x00 14. "USBHSTINAUTORETRYEN,Host IN auto retry" "Disabled,Enabled"
newline
bitfld.long 0x00 13. "ENOVERLAPCHK,Enable check for LFPS overlap during remote Ux exit" "Disabled,Enabled"
bitfld.long 0x00 12. "EXTCAPSUPTEN,External extended capability support enable" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "NSRTEXTRFSBODI,Insert extra delay between FS bulk" "Not inserted,Inserted"
bitfld.long 0x00 9.--10. "DTCT,Device timeout coarse tuning" "0us,500us,1.5us,6.5us"
newline
hexmask.long.word 0x00 0.--8. 1. "DTFT,Device timeout fine tuning"
endif
rgroup.long 0xC130++0x07
line.long 0x00 "GBUSERRADDRLO,Global SoC Bus Error Address Register Low"
line.long 0x04 "GBUSERRADDRHI,Global SoC Bus Error Address Register High"
group.long 0xC138++0x07
line.long 0x00 "GPRTBIMAPLO,Global SS Port To Bus Instance Mapping Register - Low"
bitfld.long 0x00 0.--3. "BINUM1,SS USB instance number for port" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "GPRTBIMAPHI,Global SS Port To Bus Instance Mapping Register - High"
bitfld.long 0x04 0.--3. "BINUM9,SS USB instance number for port 9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long 0xC140++0x1F
line.long 0x00 "GHWPARAMS0,Global Hardware Parameters Register 0"
hexmask.long.byte 0x00 24.--31. 1. "DWC_USB3_AWIDTH,Master/slave address bus width: 64 bit"
hexmask.long.byte 0x00 16.--23. 1. "DWC_USB3_SDWIDTH,Slave bus data width: 32 bit"
newline
hexmask.long.byte 0x00 8.--15. 1. "DWC_USB3_MSWIDTH,Master data bus width"
bitfld.long 0x00 6.--7. "DWC_USB3_SBUS_TYPE,Slave bus interface type" "AHB,?..."
newline
bitfld.long 0x00 3.--5. "DWC_USB3_MBUS_TYPE,Master bus interface type" ",AXI,?..."
bitfld.long 0x00 0.--2. "DWC_USB3_MODE,Mode of operation" ",,DRD,?..."
line.long 0x04 "GHWPARAMS1,Global Hardware Parameters Register 1"
bitfld.long 0x04 31. "DWC_USB3_EN_DBC,Enables xHCI debug capability" "Disabled,Enabled"
bitfld.long 0x04 30. "DWC_USB3_RM_OPT_FEATURES,Removes user ID/GPIO ports and SOF toggle and counter ports" "No,Yes"
newline
bitfld.long 0x04 28. "DWC_USB3_RAM_BUS_CLKS_SYNC,RAM and bus clocks synchronized to each other" "No,Yes"
bitfld.long 0x04 27. "DWC_USB3_MAC_RAM_CLKS_SYNC,MAC and RAM clocks synchronized to each other" "No,Yes"
newline
bitfld.long 0x04 26. "DWC_USB3_MAC_PHY_CLKS_SYNC,MAC and PHY clocks synchronized to each other" "No,Yes"
bitfld.long 0x04 24.--25. "DWC_USB3_EN_PWROPT,Power optimization mode" "Disabled,Clock gating only,?..."
newline
bitfld.long 0x04 23. "DWC_USB3_SPRAM_TYP,Synchronous static RAM type" "2-port,Single-port"
bitfld.long 0x04 21.--22. "DWC_USB3_NUM_RAMS,Number of RAMs" "1,2,3,?..."
newline
bitfld.long 0x04 15.--20. "DWC_USB3_DEVICE_NUM_INT,Number of device mode event buffers" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,?..."
bitfld.long 0x04 12.--14. "DWC_USB3_ASPACEWIDTH,Address space port width of master and slave bus interfaces" "1,2,3,4,5,6,?..."
newline
bitfld.long 0x04 9.--11. "DWC_USB3_REQINFOWIDTH,Request/response info port width of master and slave bus interfaces" ",,,4,5,6,?..."
bitfld.long 0x04 6.--8. "DWC_USB3_DATAINFOWIDTH,Data info port width of master and slave bus interfaces" "1,2,3,4,5,6,?..."
newline
bitfld.long 0x04 3.--5. "DWC_USB3_BURSTWIDTH,Burst port width of master and slave bus interfaces" "1,2,3,4,5,6,7,8"
bitfld.long 0x04 0.--2. "DWC_USB3_IDWIDTH1,Master ID port width" ",,,4,5,6,7,8"
line.long 0x08 "GHWPARAMS2,Global Hardware Parameters Register 2"
line.long 0x0C "GHWPARAMS3,Global Hardware Parameters Register 3"
hexmask.long.word 0x0C 23.--30. 1. "DWC_USB3_CACHE_TOTAL_XFER_RESOURCES,Maximum number of transfer resources in the core"
bitfld.long 0x0C 18.--22. "DWC_USB3_NUM_IN_EPS,Number of device mode active IN endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
bitfld.long 0x0C 12.--17. "DWC_USB3_NUM_EPS,Number of device mode endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x0C 10. "DWC_USB3_VENDOR_CTL_INTERFACE,UTMI+ PHY vendor control interface enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 6.--7. "DWC_USB3_HSPHY_DWIDTH,Data width of the UTMI+ PHY interface" ",,8-/16-bits,?..."
bitfld.long 0x0C 2.--3. "DWC_USB3_HSPHY_INTERFACE,High-speed PHY interface" "0,1,2,3"
newline
bitfld.long 0x0C 0.--1. "DWC_USB3_SSPHY_INTERFACE,SuperSpeed PHY interface" "0,1,2,3"
line.long 0x10 "GHWPARAMS4,Global Hardware Parameters Register 4"
bitfld.long 0x10 28.--31. "DWC_USB3_BMU_LSP_DEPTH,Depth of the BMU_LSP status buffer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x10 24.--27. "DWC_USB3_BMU_PTL_DEPTH,Depth of the BMU_PTL source/sink buffers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x10 23. "DWC_USB3_EN_ISOC_SUPT,Isochronous endpoint capability" "Disabled,Enabled"
bitfld.long 0x10 17.--20. "DWC_USB3_NUM_SS_USB_INSTANCES,Number of SuperSpeed USB bus instances" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x10 0.--5. "DWC_USB3_CACHE_TRBS_PER_TRANSFER,Number of cached TRBs per transfer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x14 "GHWPARAMS5,Global Hardware Parameters Register 5"
bitfld.long 0x14 22.--27. "DWC_USB3_DFQ_FIFO_DEPTH,Size of the BMU descriptor fetch request queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x14 16.--21. "DWC_USB3_DWQ_FIFO_DEPTH,Size of the BMU descriptor write queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x14 10.--15. "DWC_USB3_TXQ_FIFO_DEPTH,Size of the BMU Tx request queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
bitfld.long 0x14 4.--9. "DWC_USB3_RXQ_FIFO_DEPTH,Size of the BMU Rx request queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
newline
bitfld.long 0x14 0.--3. "DWC_USB3_BMU_BUSGM_DEPTH,Depth of the BMU-BUSGM source/sink buffers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x18 "GHWPARAMS6,Global Hardware Parameters Register 6"
hexmask.long.word 0x18 16.--31. 1. "DWC_USB3_RAM0_DEPTH,Total RAM0 depth"
bitfld.long 0x18 15. "BUSFLTRSSUPPORT,VBUS and IF related control inputs from the PHY filter addition" "Not added,Added"
newline
bitfld.long 0x18 12. "ADPSUPPORT,Internal ADP capability of the YSB 3.0 core enable" "Disabled,Enabled"
bitfld.long 0x18 11. "HNPSUPPORT,HNP support enabled" "Disabled,Enabled"
newline
bitfld.long 0x18 10. "SRPSUPPORT,SRP support enabled" "Disabled,Enabled"
bitfld.long 0x18 7. "DWC_USB3_EN_FPGA,Hardware validation/driver development with an FPGA platform" "No,Yes"
newline
bitfld.long 0x18 6. "DWC_USB3_EN_DBG_PORTS,FPGA hardware validation of the core" "No,Yes"
bitfld.long 0x18 0.--5. "DWC_USB3_PSQ_FIFO_DEPTH,Size of the BMU protocol status queue" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
line.long 0x1C "GHWPARAMS7,Global Hardware Parameters Register 7"
hexmask.long.word 0x1C 16.--31. 1. "DWC_USB3_RAM2_DEPTH,Total RAM2 depth"
hexmask.long.word 0x1C 0.--15. 1. "DWC_USB3_RAM1_DEPTH,Total RAM1 depth"
group.long 0xC180++0x07
line.long 0x00 "GPRTBIMAP_HSLO,Global High-Speed Port To Bus Instance Mapping Register - Low"
bitfld.long 0x00 0.--3. "BINUM1,HS USB instance number for port 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "GPRTBIMAP_HSHI,Global High-Speed Port To Bus Instance Mapping Register - High"
bitfld.long 0x04 0.--3. "BINUM9,HS USB instance number for port 9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
if (((per.l(ad:0x03110000+0xC118))&0x03)==0x00)
group.long 0xC200++0x03
line.long 0x00 "GUSB2PHYCFG,Global USB2 PHY Configuration Register"
bitfld.long 0x00 31. "PHYSOFTRST,UTMI PHY soft reset" "No reset,Reset"
rbitfld.long 0x00 30. "U2_FREECLK_EXISTS,USB 2.0 PHY free-running PHY clock exists" "No,Yes"
newline
bitfld.long 0x00 8. "ENBLKSLPM,Enable UTMI_SLEEP_N and UTMI_L1_SUSPEND_N" "Disabled,Enabled"
bitfld.long 0x00 6. "SUSPENDUSB20,Suspend USB2.0 HS/FS/LS PHY" "Not suspended,Suspended"
newline
bitfld.long 0x00 3. "PHYIF,PHY interface" "8-bit,16-bit"
else
group.long 0xC200++0x03
line.long 0x00 "GUSB2PHYCFG,Global USB2 PHY Configuration Register"
bitfld.long 0x00 31. "PHYSOFTRST,UTMI PHY soft reset" "No reset,Reset"
rbitfld.long 0x00 30. "U2_FREECLK_EXISTS,USB 2.0 PHY free-running PHY clock exists" "No,Yes"
newline
bitfld.long 0x00 22.--24. "LSTRD,LS turnaround time" "2-bit,2.5-bit,3-bit,3.5-bit,4-bit,4.5-bit,5-bit,5.5-bit"
bitfld.long 0x00 19.--21. "LSIPD,LS inter-packet time" "2-bit,2.5-bit,3-bit,3.5-bit,4-bit,4.5-bit,5-bit,5.5-bit"
newline
bitfld.long 0x00 8. "ENBLKSLPM,Enable UTMI_SLEEP_N and UTMI_L1_SUSPEND_N" "Disabled,Enabled"
bitfld.long 0x00 6. "SUSPENDUSB20,Suspend USB2.0 HS/FS/LS PHY" "Not suspended,Suspended"
newline
bitfld.long 0x00 3. "PHYIF,PHY interface" "8-bit,16-bit"
endif
group.long 0xC2C0++0x03
line.long 0x00 "GUSB3PIPECTL,Global USB 3.0 PIPE Control Register"
bitfld.long 0x00 31. "PHYSOFTRST,USB3 PHY soft reset" "No reset,Reset"
bitfld.long 0x00 29. "U2SSINACTP3OK,P3 OK for U2/SSInactive" "P2,P3"
newline
bitfld.long 0x00 28. "DISRXDETP3,Disabled receiver detection in P3" "No,Yes"
bitfld.long 0x00 25. "U1U2EXITFAIL_TO_RECOV,U1U2 exit fail to recovery" "Not failed,Failed"
newline
rbitfld.long 0x00 17. "SUSPENDENABLE,Suspend USB 3.0 SS PHY" "Disabled,?..."
rbitfld.long 0x00 15.--16. "DATWIDTH,PIPE data width" "32 bits,16 bits,8 bits,?..."
newline
bitfld.long 0x00 6. "TX_SWING,Tx swing" "0,1"
bitfld.long 0x00 3.--5. "TX_MARGIN,Tx margin[2:0]" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 1.--2. "TX_DE_EPPHASIS,Tx deemphasis" "0,1,2,3"
bitfld.long 0x00 0. "ELASTIC_BUFFER_MODE,Elastic buffer mode" "0,1"
repeat 4. (increment 0xC300 0x10)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "GTXFIFOSIZ_$2,Global Transmit FIFO Size Register $2"
hexmask.long.word 0x00 16.--31. 0x01 "TXFSTADDR_$2,Transmit FIFO$2 RAM start address"
hexmask.long.word 0x00 0.--15. 1. "TXFDEP_$2,TXFIFO depth"
repeat.end
repeat 3. (increment 0xC380 0x10)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "GRXFIFOSIZ_$2,Global Receive FIFO Size Register $2"
hexmask.long.word 0x00 16.--31. 0x01 "RXFSTADDR_$2,Receive FIFO$2 RAM start address"
hexmask.long.word 0x00 0.--15. 1. "RXFDEP_$2,RXFIFO depth"
repeat.end
group.long 0xC400++0x0F
line.long 0x00 "GEVNTADRLO,Global Event Buffer Address Low Register"
line.long 0x04 "GEVNTADRHI,Global Event Buffer Address High Register"
line.long 0x08 "GEVNTSIZ,Global Event Buffer Size Register"
bitfld.long 0x08 31. "EVNTINTRPTMASK,Event interrupt mask" "Not masked,Masked"
hexmask.long.word 0x08 0.--15. 1. "EVENTSIZ,Event buffer size in bytes"
line.long 0x0C "GEVNTCOUNT,Global Event Buffer Count Register"
hexmask.long.word 0x0C 0.--15. 1. "EVNTCOUNT,Event count"
rgroup.long 0xC600++0x03
line.long 0x00 "GHWPARAMS8,Global Hardware Parameters Register 8"
group.long 0xC610++0x03
line.long 0x00 "GTXFIFOPRIDEV,Global Device TXFIFO DMA Priority Register"
bitfld.long 0x00 0.--3. "GTXFIFOPRIDEV,Device TXFIFO priority" "Low,High,?..."
group.long 0xC618++0x07
line.long 0x00 "GTXFIFOPRIHST,Global Host TXFIFO DMA Priority Register"
bitfld.long 0x00 0.--2. "GTXFIFOPRIHST,Host TXFIFO priority" "Low,High,?..."
line.long 0x04 "GRXFIFOPRIHST,Global Host RXFIFO DMA Priority Register"
bitfld.long 0x04 0.--2. "GRXFIFOPRIHST,Host RXFIFO priority" "Low,High,?..."
group.long 0xC624++0x03
line.long 0x00 "GDMAHLRATIO,Global Host FIFO DMA High-Low Priority Ratio Register"
bitfld.long 0x00 8.--12. "HSTRXFIFO,Host RXFIFO DMA high-low priority ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 0.--4. "HSTTXFIFO,Host TXFIFO DMA high-low priority ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
group.long 0xC630++0x03
line.long 0x00 "GFLADJ,Global Frame Length Adjustment Register"
hexmask.long.word 0x00 8.--21. 1. "GFLADJ_REFCLK_FLADJ,Frame length adjustment to be applied"
bitfld.long 0x00 7. "GFLADJ_30MHZ_REG_SEL,Value in GFLADJ_30MHZ usage" "Not used,Used"
newline
bitfld.long 0x00 0.--5. "GFLADJ_30MHZ,Value used for frame length adjustment" "59488,59504,59520,59536,59552,59568,59584,59600,59616,59632,59648,59664,59680,59696,59712,59728,59744,59760,59776,59792,59808,59824,59840,59856,59872,59888,59904,59920,59936,59952,59968,59984,60000,60016,60032,60048,60064,60080,60096,60112,60128,60144,60160,60176,60192,60208,60224,60240,60256,60272,60288,60304,60320,60336,60352,60368,60384,60400,60416,60432,60448,60464,60480,60496"
group.long 0xC700++0x03
line.long 0x00 "DCFG,Device Configuration Register"
bitfld.long 0x00 23. "IGMSTRMPP,Ignore stream PP" "Not ignored,Ignored"
bitfld.long 0x00 22. "LPMCAP,LPM capable" "Not capable,Capable"
newline
bitfld.long 0x00 17.--21. "NUMP,Number of receive buffers" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 12.--16. "INTRNUM,Interrupt number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
newline
hexmask.long.word 0x00 3.--9. 0x08 "DEVADDR,Device address"
bitfld.long 0x00 0.--2. "DEVSPD,Device speed" "HS,FS,,,SS,?..."
if (((per.l(ad:0x03110000+0xC700))&0x07)==0x04)
group.long 0xC704++0x03
line.long 0x00 "DCTL,Device Control Register"
bitfld.long 0x00 31. "RUN_STOP,Device controller operation" "Stopped,Started"
bitfld.long 0x00 30. "CSFTRST,Core soft reset" "No reset,Reset"
newline
bitfld.long 0x00 24.--28. "HIRDTHRES,HIRD threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20.--23. "LPM_NYET_THRES,LPM NYET threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 17. "CRS,Controller restore state" "0,1"
bitfld.long 0x00 16. "CSS,Controller save state" "0,1"
newline
bitfld.long 0x00 12. "INITU2ENA,Initiate U2 enable" "Disabled,Enabled"
bitfld.long 0x00 11. "ACCEPTU2ENA,Accept U2 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "INITU1ENA,Initiate U1 enable" "Disabled,Enabled"
bitfld.long 0x00 9. "ACCEPTU1ENA,Accept U1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5.--8. "ULSTCHNGREQ,USB/link state change request" "No action,,,,SS.Disabled,Rx.Detect,SS.Inactive,,Recovery,?..."
bitfld.long 0x00 1.--4. "TSTCTL,Test control" "Disabled,J mode,K mode,SE0_NAK mode,Packet mode,Force_enable,?..."
else
group.long 0xC704++0x03
line.long 0x00 "DCTL,Device Control Register"
bitfld.long 0x00 31. "RUN_STOP,Device controller operation start" "Stopped,Started"
bitfld.long 0x00 30. "CSFTRST,Core soft reset" "No reset,Reset"
newline
bitfld.long 0x00 24.--28. "HIRDTHRES,HIRD threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 20.--23. "LPM_NYET_THRES,LPM NYET threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 17. "CRS,Controller restore state" "0,1"
bitfld.long 0x00 16. "CSS,Controller save state" "0,1"
newline
bitfld.long 0x00 12. "INITU2ENA,Initiate U2 enable" "Disabled,Enabled"
bitfld.long 0x00 11. "ACCEPTU2ENA,Accept U2 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "INITU1ENA,Initiate U1 enable" "Disabled,Enabled"
bitfld.long 0x00 9. "ACCEPTU1ENA,Accept U1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 5.--8. "ULSTCHNGREQ,USB/link state change request" ",,,,,,,,Remote wakeup,?..."
bitfld.long 0x00 1.--4. "TSTCTL,Test control" "Disabled,J mode,K mode,SE0_NAK mode,Packet mode,Force_enable,?..."
endif
group.long 0xC708++0x03
line.long 0x00 "DEVTEN,Device Event Enable Register"
bitfld.long 0x00 12. "VENDEVTTSTRCVDEN,Vendor device test LMP received rvent" "Disabled,Enabled"
bitfld.long 0x00 9. "ERRTICERREVTEN,Erratic error event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "SOFTEVTEN,Start of frame enable" "Disabled,Enabled"
bitfld.long 0x00 6. "U3L2L1SUSPEN,U3/L2-L1 suspend event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "WKUPEVTEN,Resume/remote wakeup detected event enable" "Disabled,Enabled"
bitfld.long 0x00 3. "ULSTCNGEN,USB/link state change event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 2. "CONNECTDONEEVTEN,Connection done enable" "Disabled,Enabled"
bitfld.long 0x00 1. "USBRSTEVTEN,USB reset enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "DISSCONNEVTEN,Disconnect detected event enable" "Disabled,Enabled"
if (((per.l(ad:0x03110000+0xC700))&0x07)==0x04)
rgroup.long 0xC70C++0x03
line.long 0x00 "DSTS,Device Status Register"
bitfld.long 0x00 25. "RSS,Restore state status" "0,1"
bitfld.long 0x00 24. "SSS,Save state status" "0,1"
newline
bitfld.long 0x00 23. "COREIDLE,Core idle" "Not idle,Idle"
bitfld.long 0x00 22. "DEVCTRLHLT,Device controller halted" "Not halted,Halted"
newline
bitfld.long 0x00 18.--21. "USBLNKST,USB/link state" "U0,U1,U2,U3,SS_DIS,RX_DET,SS_INACT,POLL,RECOV,HRESET,CMPLY,LPBK,Resume/Reset,?..."
bitfld.long 0x00 17. "RXFIFOEMPTY,RXFIFO empty" "Not empty,Empty"
newline
hexmask.long.word 0x00 3.--16. 1. "SOFFN[1],Frame/microframe number of the received SOF"
bitfld.long 0x00 0.--2. "CONNECTSPD,Connected speed" "HS,FS(30/60MHz),LS,FS(48MHz),SS,?..."
else
rgroup.long 0xC70C++0x03
line.long 0x00 "DSTS,Device Status Register"
bitfld.long 0x00 25. "RSS,Restore state status" "0,1"
bitfld.long 0x00 24. "SSS,Save state status" "0,1"
newline
bitfld.long 0x00 23. "COREIDLE,Core idle" "Not idle,Idle"
bitfld.long 0x00 22. "DEVCTRLHLT,Device controller halted" "Not halted,Halted"
newline
bitfld.long 0x00 18.--21. "USBLNKST,USB/link state" "On,,L1 sleep,L2 suspend,Disconnected,?..."
bitfld.long 0x00 17. "RXFIFOEMPTY,RXFIFO empty" "Not empty,Empty"
newline
hexmask.long.word 0x00 3.--16. 1. "SOFFN[1],Frame/microframe number of the received SOF"
bitfld.long 0x00 0.--2. "CONNECTSPD,Connected speed" "HS,FS(30/60MHz),LS,FS(48MHz),SS,?..."
endif
group.long 0xC710++0x07
line.long 0x00 "DGCMDPAR,Device Generic Command Parameter Register"
line.long 0x04 "DGCMD,Device Generic Command Register"
rbitfld.long 0x04 12.--15. "CMDSTATUS,Command status" "Succeed,CmdErr,?..."
bitfld.long 0x04 10. "CMDACT,Command active" "Not active,Active"
newline
bitfld.long 0x04 8. "CMDIOC,Command interrupt on complete" "No interrupt,Interrupt"
hexmask.long.byte 0x04 0.--7. 1. "CMDTYP,Command type"
group.long 0xC720++0x03
line.long 0x00 "DALEPENA,Device Active USB Endpoint Enable Register"
bitfld.long 0x00 7. "USBACTEP[7],USB endpoint 3 IN active" "Not active,Active"
bitfld.long 0x00 6. "[6],USB endpoint 3 OUT active" "Not active,Active"
newline
bitfld.long 0x00 5. "[5],USB endpoint 2 IN active" "Not active,Active"
bitfld.long 0x00 4. "[4],USB endpoint 2 OUT active" "Not active,Active"
newline
bitfld.long 0x00 3. "[3],USB endpoint 1 IN active" "Not active,Active"
bitfld.long 0x00 2. "[2],USB endpoint 1 OUT active" "Not active,Active"
newline
bitfld.long 0x00 1. "[1],USB endpoint 0 IN active" "Not active,Active"
bitfld.long 0x00 0. "[0],USB endpoint 0 OUT active" "Not active,Active"
repeat 8. (increment 0xC800 0x10)(increment 0. 1.)
group.long $1++0x0F
line.long 0x00 "DEPCMDPAR2_$2,Device Physical Endpoint-$2 Command Parameter 2 Register"
line.long 0x04 "DEPCMDPAR1_$2,Device Physical Endpoint-$2 Command Parameter 1 Register"
line.long 0x08 "DEPCMDPAR0_$2,Device Physical Endpoint-$2 Command Parameter 0 Register"
line.long 0x0C "DEPCMD_$2,Device Physical Endpoint-$2 Command Register"
hexmask.long.word 0x0C 16.--31. 1. "COMMANDPARAM,Command parameters"
bitfld.long 0x0C 12.--15. "CMDSTATUS,Command completion status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x0C 11. "HIPRI_FORCERM,High priority/force RM" "0,1"
bitfld.long 0x0C 10. "CMDACT,Command active" "Not active,Active"
newline
bitfld.long 0x0C 8. "CMDIOC,Command interrupt on complete" "No interrupt,Interrupt"
bitfld.long 0x0C 0.--3. "CMDTYP,Command type" ",Set ep configuration,Set ep transfer resource configuration,Get ep state,Set stall,Clear stall,Start transfer,Update transfer,End transfer,Start new configuration,?..."
repeat.end
group.long 0xCC00++0x07
line.long 0x00 "OCFG,OTG Configuration Register"
bitfld.long 0x00 5. "DISPRTPWRCUTOFF,OTG disable port power cut off" "Cut off,VBUS ON"
bitfld.long 0x00 3. "OTGSFTRSTMSK,OTG soft reset mask" "Resets OTG,Masked from OTG"
newline
bitfld.long 0x00 1. "HNPCAP,HNP capability" "Disabled,Enabled"
bitfld.long 0x00 0. "SRPCAP,SRP capability" "Disabled,Enabled"
line.long 0x04 "OCTL,OTG Control Register"
bitfld.long 0x04 6. "PERIMODE,Peripheral mode" "Host,Peripheral"
bitfld.long 0x04 5. "PRTPWRCTL,Port power control" "Disabled,Enabled"
newline
bitfld.long 0x04 4. "HNPREQ,HNP request" "No request,Request"
bitfld.long 0x04 3. "SESREQ,Session request" "No request,Request"
newline
bitfld.long 0x04 2. "TERMSELDLPULSE,TermSel DLine pulsing selection" "Utmi_txvalid,Utmi_termsel"
bitfld.long 0x04 1. "DEVSETHNPEN,Device set HNP enable" "Disabled,Enabled"
newline
bitfld.long 0x04 0. "HSTSETHNPEN,Host set HNP enable" "Disabled,Enabled"
if (((per.l(ad:0x03110000+0xCC08))&0x80000000)==0x00)
group.long 0xCC08++0x03
line.long 0x00 "OEVT,OTG Events Register"
rbitfld.long 0x00 31. "DEVICEMODE,Device is in A-device or B-device mode" "A-device,B-device"
bitfld.long 0x00 27. "OTGXHCIRUNSTPSETEVNT,OTG host run stop set event" "Not occurred,Occurred"
newline
bitfld.long 0x00 26. "OTGDEVRUNSTPSETEVNT,OTG device run stop set event" "Not occurred,Occurred"
bitfld.long 0x00 24. "OTGCONIDSTSCHNGEVNT,Connector ID status change event" "Not occurred,Occurred"
newline
bitfld.long 0x00 21. "OTGADEVIDLEEVNT,A-device A-IDLE event" "Not occurred,Occurred"
bitfld.long 0x00 20. "OTGADEVBHOSTENDEVNT,A-device B-Host end event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
bitfld.long 0x00 19. "OTGADEVHOSTEVNT,A-device host event applicable for OTG 2.0 mode" "Not occurred,Occurred"
bitfld.long 0x00 18. "OTGADEVHNPCHNGEVNT,A-Dev HNP change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
bitfld.long 0x00 17. "OTGADEVSRPDETEVNT,SRP detect event applicable for OTG 2.0 mode" "Not occurred,Occurred"
bitfld.long 0x00 16. "OTGADEVSESSENDDETEVNT,Session end detected event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 11. "OTGBDEVBHOSTENDEVNT,B-Device B-Host end event applicable for OTG 2.0 mode" "Not occurred,Occurred"
rbitfld.long 0x00 10. "OTGBDEVHNPCHNGEVNT,B-device HNP change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 9. "OTGBDEVSESSVLDDETEVNT,Session valid detected event applicable for OTG 2.0 mode" "Not occurred,Occurred"
rbitfld.long 0x00 8. "OTGBDEVVBUSCHNGEVNT,VBUS change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 3. "BSESVLD,B-Session valid applicable for OTG 2.0 mode" "Not valid,Valid"
rbitfld.long 0x00 2. "HSTNEGSTS,Host negotiation status applicable for OTG 2.0 mode" "Failure,Success"
newline
rbitfld.long 0x00 1. "SESREQSTS,Session request status" "Not requested,Requested"
bitfld.long 0x00 0. "OEVTERROR,OTG event error" "No error,Error"
else
group.long 0xCC08++0x03
line.long 0x00 "OEVT,OTG Events Register"
rbitfld.long 0x00 31. "DEVICEMODE,Device is in A-device or B-device mode" "A-device,B-device"
bitfld.long 0x00 27. "OTGXHCIRUNSTPSETEVNT,OTG host run stop set event" "Not occurred,Occurred"
newline
bitfld.long 0x00 26. "OTGDEVRUNSTPSETEVNT,OTG device run stop set event" "Not occurred,Occurred"
bitfld.long 0x00 24. "OTGCONIDSTSCHNGEVNT,Connector ID status change event" "Not occurred,Occurred"
newline
rbitfld.long 0x00 21. "OTGADEVIDLEEVNT,A-device A-IDLE event" "Not occurred,Occurred"
rbitfld.long 0x00 20. "OTGADEVBHOSTENDEVNT,A-device B-Host end event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 19. "OTGADEVHOSTEVNT,A-device host event applicable for OTG 2.0 mode" "Not occurred,Occurred"
rbitfld.long 0x00 18. "OTGADEVHNPCHNGEVNT,A-Dev HNP change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 17. "OTGADEVSRPDETEVNT,SRP detect event applicable for OTG 2.0 mode" "Not occurred,Occurred"
rbitfld.long 0x00 16. "OTGADEVSESSENDDETEVNT,Session end detected event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
bitfld.long 0x00 11. "OTGBDEVBHOSTENDEVNT,B-Device B-Host end event applicable for OTG 2.0 mode" "Not occurred,Occurred"
bitfld.long 0x00 10. "OTGBDEVHNPCHNGEVNT,B-device HNP change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
bitfld.long 0x00 9. "OTGBDEVSESSVLDDETEVNT,Session valid detected event applicable for OTG 2.0 mode" "Not occurred,Occurred"
bitfld.long 0x00 8. "OTGBDEVVBUSCHNGEVNT,VBUS change event applicable for OTG 2.0 mode" "Not occurred,Occurred"
newline
rbitfld.long 0x00 3. "BSESVLD,B-Session valid applicable for OTG 2.0 mode" "Not valid,Valid"
rbitfld.long 0x00 2. "HSTNEGSTS,Host negotiation status applicable for OTG 2.0 mode" "Failure,Success"
newline
rbitfld.long 0x00 1. "SESREQSTS,Session request status" "Not requested,Requested"
bitfld.long 0x00 0. "OEVTERROR,OTG event error" "No error,Error"
endif
group.long 0xCC0C++0x07
line.long 0x00 "OEVTEN,OTG Events Enable Register"
bitfld.long 0x00 27. "OTGXHCIRUNSTPSETEVNTEN,OTG host run stop set event enable" "Disabled,Enabled"
bitfld.long 0x00 26. "OTGDEVRUNSTPSETEVNTEN,OTG device run stop set event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 24. "OTGCONIDSTSCHNGEVNTEN,Connector ID status change event enable" "Disabled,Enabled"
bitfld.long 0x00 23. "HRRCONFNOTIFEVNTEN,HRRCONFNOTIF event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 22. "HRRINITNOTIFEVNTEN,HRRINITNOTIF event enable" "Disabled,Enabled"
bitfld.long 0x00 21. "OTGADEVIDLEEVNTEN,A-device A-IDLE event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 20. "OTGADEVBHOSTENDEVNTEN,A-device B-host end event enable" "Disabled,Enabled"
bitfld.long 0x00 19. "OTGADEVHOSTEVNTEN,A-device host event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 18. "OTGADEVHNPCHNGEVNTEN,A-Device HNP change event enable" "Disabled,Enabled"
bitfld.long 0x00 17. "OTGADEVSRPDETEVNTEN,SRP detect event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 16. "OTGADEVSESSENDDETEVNTEN,Session end detected event enable" "Disabled,Enabled"
bitfld.long 0x00 11. "OTGBDEVBHOSTENDEVNTEN,B-device B-host end event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "OTGBDEVHNPCHNGEVNTEN,B-device HNP change event enable" "Disabled,Enabled"
bitfld.long 0x00 9. "OTGBDEVSESSVLDDETEVNTEN,Session valid detected event enable" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "OTGBDEVVBUSCHNGEVNTEN,VBUS change event enable" "Disabled,Enabled"
line.long 0x04 "OSTS,OTG Status Register"
bitfld.long 0x04 13. "DEVRUNSTP,Status of the DCTL[RUN_STOP] bit" "0,1"
bitfld.long 0x04 12. "XHCIRUNSTP,OTG host run stop set event" "Not occurred,Occurred"
newline
bitfld.long 0x04 4. "PERIPHERALSTATE,Activity of core" "Host,Peripheral"
bitfld.long 0x04 3. "XHCIPRTPOWER,PORTSC[PP] bit in the xHCI register" "0,1"
newline
bitfld.long 0x04 2. "BSESVLD,B-session valid" "Not valid,Valid"
bitfld.long 0x04 1. "ASESVLD,VBUS valid" "Not valid,Valid"
newline
bitfld.long 0x04 0. "CONIDSTS,Connector ID status" "A-device,B-device"
group.long 0xCC20++0x0F
line.long 0x00 "ADPCFG,ADP Configuration Register"
bitfld.long 0x00 30.--31. "PRBPER,Probe period" "0.775 sec,1.55 sec,2.275 sec,?..."
bitfld.long 0x00 28.--29. "PRBDELTA,Probe delta" "1 cycle,2 cycles,3 cycles,4 cycles"
newline
bitfld.long 0x00 26.--27. "PRBDSCHG,Probe discharge" "4 ms,8 ms,16 ms,32 ms"
line.long 0x04 "ADPCTL,ADP Control Register"
bitfld.long 0x04 28. "ENAPRB,Enable probe" "Disabled,Enabled"
bitfld.long 0x04 27. "ENASNS,Enable sense" "Disabled,Enabled"
newline
bitfld.long 0x04 26. "ADPEN,ADP enable" "Disabled,Enabled"
bitfld.long 0x04 25. "ADPRES,ADP reset" "No reset,Reset"
newline
rbitfld.long 0x04 24. "WB,Write busy" "Completed,In progress"
line.long 0x08 "ADPEVT,ADP Event Register"
bitfld.long 0x08 28. "ADPPRBEVNT,ADP probe event" "0,1"
bitfld.long 0x08 27. "ADPSNSEVNT,ADP sense event" "0,1"
newline
bitfld.long 0x08 26. "ADPTMOUTEVNT,ADP timeout event" "Not completed,Completed"
bitfld.long 0x08 25. "ADPRSTCMPLTEVNT,ADP reset complete event" "Not completed,Completed"
newline
hexmask.long.word 0x08 0.--15. 1. "RTIM,Ramp time"
line.long 0x0C "ADPEVTEN,ADP Event Enable Register"
bitfld.long 0x0C 28. "ADPPRBEVNTEN,ADP probe event enable" "Disabled,Enabled"
bitfld.long 0x0C 27. "ADPSNSEVNTEN,ADP sense event enable" "Disabled,Enabled"
newline
bitfld.long 0x0C 26. "ADPTMOUTEVNTEN,ADP timeout event enable" "Disabled,Enabled"
bitfld.long 0x0C 25. "ADPRSTCMPLTEVNTEN,ADP reset complete event enable" "Disabled,Enabled"
tree.end
tree "USBC2_PHY_SS"
base ad:0x704610000
rgroup.word 0x00++0x03
line.word 0x00 "SUP_IDCODE_LO,SUP_IDCODE_LO"
line.word 0x02 "SUP_IDCODE_HI,SUP_IDCODE_HI"
group.word 0x60++0x01
line.word 0x00 "MPLL_LOOP_CTL,MPLL_LOOP_CTL"
bitfld.word 0x00 4.--7. "PROP_CNTRL,Charge pump proportional current setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.word 0x200C++0x01
line.word 0x00 "LANE0_RX_OVRD_IN_HI,LANE0_RX_OVRD_IN_HI"
bitfld.word 0x00 11. "RX_EQ_OVRD,Override value for RX_EQ" "0,1"
bitfld.word 0x00 8.--10. "RX_EQ,Override value for RX_EQ" "0,1,2,3,4,5,6,7"
bitfld.word 0x00 7. "RX_EQ_EN_OVRD,Override enable for RX_EQ_EN" "0,1"
bitfld.word 0x00 6. "RX_EQ_EN,Override value for RX_EQ_EN" "0,1"
tree.end
tree.end
tree "WDOG (Watchdog Timer Unit)"
tree "CL1_CORE0"
base ad:0xC000000
group.long 0x00++0x03
line.long 0x00 "WDOGLOAD,Watchdog Load Register"
rgroup.long 0x04++0x03
line.long 0x00 "WDOGVALUE,Watchdog Value Register"
group.long 0x08++0x03
line.long 0x00 "WDOGCONTROL,Watchdog Control Register"
bitfld.long 0x00 0. "INTEN,Enable the interrupt event" "Disabled,Enabled"
bitfld.long 0x00 1. "RESEN,Enable watchdog reset output" "Disabled,Enabled"
wgroup.long 0x0C++0x03
line.long 0x00 "WDOGINTCLR,Watchdog Clear Interrupt Register"
bitfld.long 0x00 0. "RAW_WATCHDOG_INTERRUPT,Raw interrupt status from the counter" "Clear,Clear"
rgroup.long 0x10++0x07
line.long 0x00 "WDOGRIS,Watchdog Raw Interrupt Status Register"
bitfld.long 0x00 0. "RAW_WATCHDOG_INTERRUPT,Raw interrupt status from the counter" "No interrupt,Interrupt"
line.long 0x04 "WDOGMIS,Watchdog Interrupt Status Register"
bitfld.long 0x04 0. "WATCHDOG_INTERRUPT,Enabled interrupt status from the counter" "No interrupt,Interrupt"
group.long 0xC00++0x03
line.long 0x00 "WDOGLOCK,Watchdog Lock Register"
bitfld.long 0x00 0. "REGISTER_WRITE_ENABLE_STATUS,Register write access status" "Not locked,Locked"
hexmask.long 0x00 1.--31. 1. "ENABLE_REGISTER_WRITES,All other registers write access enable"
group.long 0xF00++0x03
line.long 0x00 "WDOGITCR,Watchdog Integration Test Control Register"
bitfld.long 0x00 0. "INTEGRATION_TEST_MODE_ENABLE,Integration test mode enable" "Disabled,Enabled"
wgroup.long 0xF04++0x03
line.long 0x00 "WDOGITOP,Watchdog Integration Test Output Set Register"
bitfld.long 0x00 0. "INTEGRATION_TEST_WDOGRES_VALUE,Integration test WDOGRES value" "0,1"
bitfld.long 0x00 1. "INTEGRATION_TEST_WDOGINT_VALUE,Integration test WDOGINT value" "0,1"
rgroup.long 0xFE0++0x0F
line.long 0x00 "WDOGPERIPHID0,Peripheral Identification Register 0"
hexmask.long.byte 0x00 0.--7. 1. "PARTNUMBER0,PartNumber0"
line.long 0x04 "WDOGPERIPHID1,Peripheral Identification Register 1"
bitfld.long 0x04 0.--3. "PARTNUMBER1,PartNumber1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "DESIGNER0,Designer0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x08 "WDOGPERIPHID2,Peripheral Identification Register 2"
bitfld.long 0x08 0.--3. "DESIGNER1,Designer1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 4.--7. "REVISION,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x0C "WDOGPERIPHID3,Peripheral Identification Register 3"
hexmask.long.byte 0x0C 0.--7. 1. "CONFIGURATION,Configuration"
repeat 4. (increment 0xFF0 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "WDOGPCELLID$2,PrimeCell Identification Register $2"
hexmask.long.byte 0x00 0.--7. 1. "WdogPCellID$2,WdogPCellID$2"
repeat.end
tree.end
tree "CL1_CORE1"
base ad:0xC010000
group.long 0x00++0x03
line.long 0x00 "WDOGLOAD,Watchdog Load Register"
rgroup.long 0x04++0x03
line.long 0x00 "WDOGVALUE,Watchdog Value Register"
group.long 0x08++0x03
line.long 0x00 "WDOGCONTROL,Watchdog Control Register"
bitfld.long 0x00 0. "INTEN,Enable the interrupt event" "Disabled,Enabled"
bitfld.long 0x00 1. "RESEN,Enable watchdog reset output" "Disabled,Enabled"
wgroup.long 0x0C++0x03
line.long 0x00 "WDOGINTCLR,Watchdog Clear Interrupt Register"
bitfld.long 0x00 0. "RAW_WATCHDOG_INTERRUPT,Raw interrupt status from the counter" "Clear,Clear"
rgroup.long 0x10++0x07
line.long 0x00 "WDOGRIS,Watchdog Raw Interrupt Status Register"
bitfld.long 0x00 0. "RAW_WATCHDOG_INTERRUPT,Raw interrupt status from the counter" "No interrupt,Interrupt"
line.long 0x04 "WDOGMIS,Watchdog Interrupt Status Register"
bitfld.long 0x04 0. "WATCHDOG_INTERRUPT,Enabled interrupt status from the counter" "No interrupt,Interrupt"
group.long 0xC00++0x03
line.long 0x00 "WDOGLOCK,Watchdog Lock Register"
bitfld.long 0x00 0. "REGISTER_WRITE_ENABLE_STATUS,Register write access status" "Not locked,Locked"
hexmask.long 0x00 1.--31. 1. "ENABLE_REGISTER_WRITES,All other registers write access enable"
group.long 0xF00++0x03
line.long 0x00 "WDOGITCR,Watchdog Integration Test Control Register"
bitfld.long 0x00 0. "INTEGRATION_TEST_MODE_ENABLE,Integration test mode enable" "Disabled,Enabled"
wgroup.long 0xF04++0x03
line.long 0x00 "WDOGITOP,Watchdog Integration Test Output Set Register"
bitfld.long 0x00 0. "INTEGRATION_TEST_WDOGRES_VALUE,Integration test WDOGRES value" "0,1"
bitfld.long 0x00 1. "INTEGRATION_TEST_WDOGINT_VALUE,Integration test WDOGINT value" "0,1"
rgroup.long 0xFE0++0x0F
line.long 0x00 "WDOGPERIPHID0,Peripheral Identification Register 0"
hexmask.long.byte 0x00 0.--7. 1. "PARTNUMBER0,PartNumber0"
line.long 0x04 "WDOGPERIPHID1,Peripheral Identification Register 1"
bitfld.long 0x04 0.--3. "PARTNUMBER1,PartNumber1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "DESIGNER0,Designer0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x08 "WDOGPERIPHID2,Peripheral Identification Register 2"
bitfld.long 0x08 0.--3. "DESIGNER1,Designer1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 4.--7. "REVISION,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x0C "WDOGPERIPHID3,Peripheral Identification Register 3"
hexmask.long.byte 0x0C 0.--7. 1. "CONFIGURATION,Configuration"
repeat 4. (increment 0xFF0 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "WDOGPCELLID$2,PrimeCell Identification Register $2"
hexmask.long.byte 0x00 0.--7. 1. "WdogPCellID$2,WdogPCellID$2"
repeat.end
tree.end
tree "TZWDT"
base ad:0x23C0000
group.long 0x00++0x03
line.long 0x00 "WDOGLOAD,Watchdog Load Register"
rgroup.long 0x04++0x03
line.long 0x00 "WDOGVALUE,Watchdog Value Register"
group.long 0x08++0x03
line.long 0x00 "WDOGCONTROL,Watchdog Control Register"
bitfld.long 0x00 0. "INTEN,Enable the interrupt event" "Disabled,Enabled"
bitfld.long 0x00 1. "RESEN,Enable watchdog reset output" "Disabled,Enabled"
wgroup.long 0x0C++0x03
line.long 0x00 "WDOGINTCLR,Watchdog Clear Interrupt Register"
bitfld.long 0x00 0. "RAW_WATCHDOG_INTERRUPT,Raw interrupt status from the counter" "Clear,Clear"
rgroup.long 0x10++0x07
line.long 0x00 "WDOGRIS,Watchdog Raw Interrupt Status Register"
bitfld.long 0x00 0. "RAW_WATCHDOG_INTERRUPT,Raw interrupt status from the counter" "No interrupt,Interrupt"
line.long 0x04 "WDOGMIS,Watchdog Interrupt Status Register"
bitfld.long 0x04 0. "WATCHDOG_INTERRUPT,Enabled interrupt status from the counter" "No interrupt,Interrupt"
group.long 0xC00++0x03
line.long 0x00 "WDOGLOCK,Watchdog Lock Register"
bitfld.long 0x00 0. "REGISTER_WRITE_ENABLE_STATUS,Register write access status" "Not locked,Locked"
hexmask.long 0x00 1.--31. 1. "ENABLE_REGISTER_WRITES,All other registers write access enable"
group.long 0xF00++0x03
line.long 0x00 "WDOGITCR,Watchdog Integration Test Control Register"
bitfld.long 0x00 0. "INTEGRATION_TEST_MODE_ENABLE,Integration test mode enable" "Disabled,Enabled"
wgroup.long 0xF04++0x03
line.long 0x00 "WDOGITOP,Watchdog Integration Test Output Set Register"
bitfld.long 0x00 0. "INTEGRATION_TEST_WDOGRES_VALUE,Integration test WDOGRES value" "0,1"
bitfld.long 0x00 1. "INTEGRATION_TEST_WDOGINT_VALUE,Integration test WDOGINT value" "0,1"
rgroup.long 0xFE0++0x0F
line.long 0x00 "WDOGPERIPHID0,Peripheral Identification Register 0"
hexmask.long.byte 0x00 0.--7. 1. "PARTNUMBER0,PartNumber0"
line.long 0x04 "WDOGPERIPHID1,Peripheral Identification Register 1"
bitfld.long 0x04 0.--3. "PARTNUMBER1,PartNumber1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 4.--7. "DESIGNER0,Designer0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x08 "WDOGPERIPHID2,Peripheral Identification Register 2"
bitfld.long 0x08 0.--3. "DESIGNER1,Designer1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x08 4.--7. "REVISION,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x0C "WDOGPERIPHID3,Peripheral Identification Register 3"
hexmask.long.byte 0x0C 0.--7. 1. "CONFIGURATION,Configuration"
repeat 4. (increment 0xFF0 0x04)(increment 0. 1.)
rgroup.long $1++0x03
line.long 0x00 "WDOGPCELLID$2,PrimeCell Identification Register $2"
hexmask.long.byte 0x00 0.--7. 1. "WdogPCellID$2,WdogPCellID$2"
repeat.end
tree.end
tree.end
tree "SEC (Security)"
base ad:0x8000000
group.long 0x04++0x03
line.long 0x00 "MCFGR,Master Configuration Register"
bitfld.long 0x00 31. "SWRST,Software reset" "No reset,Reset"
bitfld.long 0x00 30. "WDE,DECO watchdog enable" "Disabled,Enabled"
bitfld.long 0x00 29. "WDF,Watchdog fast" "Normal,Fast"
newline
bitfld.long 0x00 28. "DMA_RST,DMA reset" "No effect,Reset"
bitfld.long 0x00 27. "WRHD,Write handoff disable" "No,Yes"
bitfld.long 0x00 21. "DJPC,Disable job performance counters" "No,Yes"
newline
bitfld.long 0x00 20. "DBPC,Disable byte performance counters" "No,Yes"
bitfld.long 0x00 17. "NSP,No snoop" "Snooped,Not snooped"
bitfld.long 0x00 16. "PS,Pointer size" "32-bit,49-bit"
newline
bitfld.long 0x00 13. "ARCACHE[1],Cacheable/modifiable" "Not modified,Modified"
bitfld.long 0x00 12. "[0],Bufferable" "Not Fetched,Fetched"
bitfld.long 0x00 9. "AWCACHE[1],Cacheable/modifiable" "Not modified,Modified"
newline
bitfld.long 0x00 8. "[0],Bufferable" "Not Generated,Generated"
bitfld.long 0x00 4.--7. "AXIPIPE,AXI pipeline depth" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 2. "LARGE_BURST,Enable large bursts" "Disabled,Enabled"
newline
rbitfld.long 0x00 0. "NORMAL_BURST,Normal burst size" "32 byte,64 byte"
group.long 0x0C++0x03
line.long 0x00 "SCFGR,Security Configuration Register"
rbitfld.long 0x00 28.--31. "MPCURVE,Manufacturing protection curve" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "MPPKRC,Manufacturing Protection Private Key Register Clear" "No effect,Clear"
bitfld.long 0x00 26. "MPMRL,Manufacturing Protection Message Register Lock" "Not locked,Locked"
newline
bitfld.long 0x00 15. "VIRT_EN,Virtualization enable" "Disabled,Enabled"
bitfld.long 0x00 11. "LCK_TRNG,Lock TRNG Program Mode" "Not locked,Locked"
bitfld.long 0x00 10. "RDB,Enable random data buffer" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "RNGSH0,Random Number Generator State Handle 0" "Any mode,Not in deterministic mode"
bitfld.long 0x00 8. "RANDDPAR,Random Differential Power Analysis Resistance (DPAR) Mask" "Default seed,State Handle 0"
bitfld.long 0x00 0.--1. "PRIBLOB,Private blob type during Trusted Mode selection" "Secure boot,Provisioning type 1,Provisioning type 2,Normal operation"
tree "Job Ring ICID Registers"
if ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x10)&0x20000)==0x20000)&&((per.l(ad:0x8000000+0x10)&0x80000000)==0x80000000)
group.long 0x10++0x03
line.long 0x00 "JR0ICID_MS,Job Ring 0 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
rbitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x10)&0x20000)==0x00)&&((per.l(ad:0x8000000+0x10)&0x80000000)==0x80000000)
group.long 0x10++0x03
line.long 0x00 "JR0ICID_MS,Job Ring 0 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x10)&0x20000)==0x20000)&&((per.l(ad:0x8000000+0x10)&0x80000000)==0x80000000)
group.long 0x10++0x03
line.long 0x00 "JR0ICID_MS,Job Ring 0 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
rbitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x10)&0x20000)==0x00)&&((per.l(ad:0x8000000+0x10)&0x80000000)==0x80000000)
group.long 0x10++0x03
line.long 0x00 "JR0ICID_MS,Job Ring 0 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x10)&0x80000000)==0x00)
group.long 0x10++0x03
line.long 0x00 "JR0ICID_MS,Job Ring 0 ICID Register - Most Significant Half"
bitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
bitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x10)&0x80000000)==0x00)
group.long 0x10++0x03
line.long 0x00 "JR0ICID_MS,Job Ring 0 ICID Register - Most Significant Half"
bitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow make trusted descriptor" "Not allowed,Allowed"
newline
bitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security domain identifier"
endif
if ((per.l(ad:0x8000000+0x10)&0x80000000)==0x80000000)
rgroup.long (0x10+0x04)++0x03
line.long 0x00 "JR0ICID_LS,Job Ring 0 ICID Register - Least Significant Half"
bitfld.long 0x00 16. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
bitfld.long 0x00 15. "PL,Privilege level" "Not permitted,Permitted"
hexmask.long.byte 0x00 0.--6. 1. "ICID,ICID value"
else
group.long (0x10+0x04)++0x03
line.long 0x00 "JR0ICID_LS,Job Ring 0 ICID Register - Least Significant Half"
bitfld.long 0x00 16. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
bitfld.long 0x00 15. "PL,Privilege level" "Not permitted,Permitted"
hexmask.long.byte 0x00 0.--6. 1. "ICID,ICID value"
endif
if ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x18)&0x20000)==0x20000)&&((per.l(ad:0x8000000+0x18)&0x80000000)==0x80000000)
group.long 0x18++0x03
line.long 0x00 "JR1ICID_MS,Job Ring 1 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
rbitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x18)&0x20000)==0x00)&&((per.l(ad:0x8000000+0x18)&0x80000000)==0x80000000)
group.long 0x18++0x03
line.long 0x00 "JR1ICID_MS,Job Ring 1 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x18)&0x20000)==0x20000)&&((per.l(ad:0x8000000+0x18)&0x80000000)==0x80000000)
group.long 0x18++0x03
line.long 0x00 "JR1ICID_MS,Job Ring 1 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
rbitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x18)&0x20000)==0x00)&&((per.l(ad:0x8000000+0x18)&0x80000000)==0x80000000)
group.long 0x18++0x03
line.long 0x00 "JR1ICID_MS,Job Ring 1 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x18)&0x80000000)==0x00)
group.long 0x18++0x03
line.long 0x00 "JR1ICID_MS,Job Ring 1 ICID Register - Most Significant Half"
bitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
bitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x18)&0x80000000)==0x00)
group.long 0x18++0x03
line.long 0x00 "JR1ICID_MS,Job Ring 1 ICID Register - Most Significant Half"
bitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow make trusted descriptor" "Not allowed,Allowed"
newline
bitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security domain identifier"
endif
if ((per.l(ad:0x8000000+0x18)&0x80000000)==0x80000000)
rgroup.long (0x18+0x04)++0x03
line.long 0x00 "JR1ICID_LS,Job Ring 1 ICID Register - Least Significant Half"
bitfld.long 0x00 16. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
bitfld.long 0x00 15. "PL,Privilege level" "Not permitted,Permitted"
hexmask.long.byte 0x00 0.--6. 1. "ICID,ICID value"
else
group.long (0x18+0x04)++0x03
line.long 0x00 "JR1ICID_LS,Job Ring 1 ICID Register - Least Significant Half"
bitfld.long 0x00 16. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
bitfld.long 0x00 15. "PL,Privilege level" "Not permitted,Permitted"
hexmask.long.byte 0x00 0.--6. 1. "ICID,ICID value"
endif
if ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x20)&0x20000)==0x20000)&&((per.l(ad:0x8000000+0x20)&0x80000000)==0x80000000)
group.long 0x20++0x03
line.long 0x00 "JR2ICID_MS,Job Ring 2 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
rbitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x20)&0x20000)==0x00)&&((per.l(ad:0x8000000+0x20)&0x80000000)==0x80000000)
group.long 0x20++0x03
line.long 0x00 "JR2ICID_MS,Job Ring 2 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x20)&0x20000)==0x20000)&&((per.l(ad:0x8000000+0x20)&0x80000000)==0x80000000)
group.long 0x20++0x03
line.long 0x00 "JR2ICID_MS,Job Ring 2 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
rbitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x20)&0x20000)==0x00)&&((per.l(ad:0x8000000+0x20)&0x80000000)==0x80000000)
group.long 0x20++0x03
line.long 0x00 "JR2ICID_MS,Job Ring 2 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x20)&0x80000000)==0x00)
group.long 0x20++0x03
line.long 0x00 "JR2ICID_MS,Job Ring 2 ICID Register - Most Significant Half"
bitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
bitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x20)&0x80000000)==0x00)
group.long 0x20++0x03
line.long 0x00 "JR2ICID_MS,Job Ring 2 ICID Register - Most Significant Half"
bitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow make trusted descriptor" "Not allowed,Allowed"
newline
bitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security domain identifier"
endif
if ((per.l(ad:0x8000000+0x20)&0x80000000)==0x80000000)
rgroup.long (0x20+0x04)++0x03
line.long 0x00 "JR2ICID_LS,Job Ring 2 ICID Register - Least Significant Half"
bitfld.long 0x00 16. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
bitfld.long 0x00 15. "PL,Privilege level" "Not permitted,Permitted"
hexmask.long.byte 0x00 0.--6. 1. "ICID,ICID value"
else
group.long (0x20+0x04)++0x03
line.long 0x00 "JR2ICID_LS,Job Ring 2 ICID Register - Least Significant Half"
bitfld.long 0x00 16. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
bitfld.long 0x00 15. "PL,Privilege level" "Not permitted,Permitted"
hexmask.long.byte 0x00 0.--6. 1. "ICID,ICID value"
endif
if ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x28)&0x20000)==0x20000)&&((per.l(ad:0x8000000+0x28)&0x80000000)==0x80000000)
group.long 0x28++0x03
line.long 0x00 "JR3ICID_MS,Job Ring 3 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
rbitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x28)&0x20000)==0x00)&&((per.l(ad:0x8000000+0x28)&0x80000000)==0x80000000)
group.long 0x28++0x03
line.long 0x00 "JR3ICID_MS,Job Ring 3 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x28)&0x20000)==0x20000)&&((per.l(ad:0x8000000+0x28)&0x80000000)==0x80000000)
group.long 0x28++0x03
line.long 0x00 "JR3ICID_MS,Job Ring 3 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
rbitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x28)&0x20000)==0x00)&&((per.l(ad:0x8000000+0x28)&0x80000000)==0x80000000)
group.long 0x28++0x03
line.long 0x00 "JR3ICID_MS,Job Ring 3 ICID Register - Most Significant Half"
rbitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x8000)&&((per.l(ad:0x8000000+0x28)&0x80000000)==0x00)
group.long 0x28++0x03
line.long 0x00 "JR3ICID_MS,Job Ring 3 ICID Register - Most Significant Half"
bitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
bitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow Make Trusted Descriptor" "Not allowed,Allowed"
newline
bitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security Domain Identifier"
elif ((per.l(ad:0x8000000+0x0C)&0x8000)==0x00)&&((per.l(ad:0x8000000+0x28)&0x80000000)==0x00)
group.long 0x28++0x03
line.long 0x00 "JR3ICID_MS,Job Ring 3 ICID Register - Most Significant Half"
bitfld.long 0x00 31. "LICID,Lock ICID" "Not locked,Locked"
rbitfld.long 0x00 17. "LAMTD,Lock AMTD" "Not locked,Locked"
bitfld.long 0x00 16. "AMTD,Allow make trusted descriptor" "Not allowed,Allowed"
newline
bitfld.long 0x00 15. "TZ,TrustZone SecureWorld" "Disabled,Enabled"
hexmask.long.word 0x00 0.--11. 1. "SDID,Security domain identifier"
endif
if ((per.l(ad:0x8000000+0x28)&0x80000000)==0x80000000)
rgroup.long (0x28+0x04)++0x03
line.long 0x00 "JR3ICID_LS,Job Ring 3 ICID Register - Least Significant Half"
bitfld.long 0x00 16. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
bitfld.long 0x00 15. "PL,Privilege level" "Not permitted,Permitted"
hexmask.long.byte 0x00 0.--6. 1. "ICID,ICID value"
else
group.long (0x28+0x04)++0x03
line.long 0x00 "JR3ICID_LS,Job Ring 3 ICID Register - Least Significant Half"
bitfld.long 0x00 16. "BMT,Bypass memory translation" "Not bypassed,Bypassed"
bitfld.long 0x00 15. "PL,Privilege level" "Not permitted,Permitted"
hexmask.long.byte 0x00 0.--6. 1. "ICID,ICID value"
endif
tree.end
newline
group.long 0x58++0x03
line.long 0x00 "DEBUGCTL,Debug Control Register"
rbitfld.long 0x00 17. "STOP_ACK,Job queue controller acknowledge stop" "Not stopped,Stopped"
bitfld.long 0x00 16. "STOP,Stop jobs processing request" "Not requested,Requested"
if (((per.l(ad:0x8000000+0x0C))&0x8000)==0x8000)
group.long 0x5C++0x03
line.long 0x00 "JRSTARTR,Job Ring Start Register"
bitfld.long 0x00 3. "START_JR3,Start job ring 3" "Stop mode,Start mode"
bitfld.long 0x00 2. "START_JR2,Start job ring 2" "Stop mode,Start mode"
bitfld.long 0x00 1. "START_JR1,Start job ring 1" "Stop mode,Start mode"
newline
bitfld.long 0x00 0. "START_JR0,Start job ring 0" "Stop mode,Start mode"
else
rgroup.long 0x5C++0x03
line.long 0x00 "JRSTARTR,Job Ring Start Register"
bitfld.long 0x00 3. "START_JR3,Start job ring 3" "Stop mode,Start mode"
bitfld.long 0x00 2. "START_JR2,Start job ring 2" "Stop mode,Start mode"
bitfld.long 0x00 1. "START_JR1,Start job ring 1" "Stop mode,Start mode"
newline
bitfld.long 0x00 0. "START_JR0,Start job ring 0" "Stop mode,Start mode"
endif
if (((per.l(ad:0x8000000+0x60))&0x80000000)==0x00)&&(((per.l(ad:0x8000000+0x60))&0x40000000)==0x40000000)
group.long 0x60++0x03
line.long 0x00 "RTICAICID_MS,RTIC ICID Register For Block A"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
bitfld.long 0x00 30. "TZCTL,TrustZone control" "Disabled,Enabled"
bitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
elif (((per.l(ad:0x8000000+0x60))&0x80000000)==0x00)&&(((per.l(ad:0x8000000+0x60))&0x40000000)==0x00)
group.long 0x60++0x03
line.long 0x00 "RTICAICID_MS,RTIC ICID Register For Block A"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
bitfld.long 0x00 30. "TZCTL,TrustZone control" "Disabled,Enabled"
rbitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
else
rgroup.long 0x60++0x03
line.long 0x00 "RTICAICID_MS,RTIC ICID Register For Block A"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
bitfld.long 0x00 30. "TZCTL,TrustZone control" "Disabled,Enabled"
bitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
endif
group.long (0x60+0x04)++0x03
line.long 0x00 "RTICAICID_LS,RTIC ICID Register For Block A"
bitfld.long 0x00 16. "BMT,RTIC bypass memory translation" "Not bypassed,Bypassed"
hexmask.long.byte 0x00 0.--6. 1. "R_ICID,RTIC ICID. Defines the ICID value asserted when RTIC accesses the addresses in the hash block A regions of memory"
if (((per.l(ad:0x8000000+0x68))&0x80000000)==0x00)&&(((per.l(ad:0x8000000+0x60))&0x40000000)==0x40000000)
group.long 0x68++0x03
line.long 0x00 "RTICBICID_MS,RTIC ICID Register For Block B"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
bitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
elif (((per.l(ad:0x8000000+0x68))&0x80000000)==0x00)&&(((per.l(ad:0x8000000+0x60))&0x40000000)==0x00)
group.long 0x68++0x03
line.long 0x00 "RTICBICID_MS,RTIC ICID Register For Block B"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
rbitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
else
rgroup.long 0x68++0x03
line.long 0x00 "RTICBICID_MS,RTIC ICID Register For Block B"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
bitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
endif
group.long (0x68+0x04)++0x03
line.long 0x00 "RTICBICID_LS,RTIC ICID Register For Block B"
bitfld.long 0x00 16. "BMT,RTIC bypass memory translation" "Not bypassed,Bypassed"
hexmask.long.byte 0x00 0.--6. 1. "R_ICID,RTIC ICID. Defines the ICID value asserted when RTIC accesses the addresses in the hash block B regions of memory"
if (((per.l(ad:0x8000000+0x70))&0x80000000)==0x00)&&(((per.l(ad:0x8000000+0x60))&0x40000000)==0x40000000)
group.long 0x70++0x03
line.long 0x00 "RTICCICID_MS,RTIC ICID Register For Block C"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
bitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
elif (((per.l(ad:0x8000000+0x70))&0x80000000)==0x00)&&(((per.l(ad:0x8000000+0x60))&0x40000000)==0x00)
group.long 0x70++0x03
line.long 0x00 "RTICCICID_MS,RTIC ICID Register For Block C"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
rbitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
else
rgroup.long 0x70++0x03
line.long 0x00 "RTICCICID_MS,RTIC ICID Register For Block C"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
bitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
endif
group.long (0x70+0x04)++0x03
line.long 0x00 "RTICCICID_LS,RTIC ICID Register For Block C"
bitfld.long 0x00 16. "BMT,RTIC bypass memory translation" "Not bypassed,Bypassed"
hexmask.long.byte 0x00 0.--6. 1. "R_ICID,RTIC ICID. Defines the ICID value asserted when RTIC accesses the addresses in the hash block C regions of memory"
if (((per.l(ad:0x8000000+0x78))&0x80000000)==0x00)&&(((per.l(ad:0x8000000+0x60))&0x40000000)==0x40000000)
group.long 0x78++0x03
line.long 0x00 "RTICDICID_MS,RTIC ICID Register For Block D"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
bitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
elif (((per.l(ad:0x8000000+0x78))&0x80000000)==0x00)&&(((per.l(ad:0x8000000+0x60))&0x40000000)==0x00)
group.long 0x78++0x03
line.long 0x00 "RTICDICID_MS,RTIC ICID Register For Block D"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
rbitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
else
rgroup.long 0x78++0x03
line.long 0x00 "RTICDICID_MS,RTIC ICID Register For Block D"
bitfld.long 0x00 31. "LCK,RTIC ICID lock" "Not locked,Locked"
bitfld.long 0x00 15. "TZ,RTIC TrustZone SecureWorld enable" "Disabled,Enabled"
endif
group.long (0x78+0x04)++0x03
line.long 0x00 "RTICDICID_LS,RTIC ICID Register For Block D"
bitfld.long 0x00 16. "BMT,RTIC bypass memory translation" "Not bypassed,Bypassed"
hexmask.long.byte 0x00 0.--6. 1. "R_ICID,RTIC ICID. Defines the ICID value asserted when RTIC accesses the addresses in the hash block D regions of memory"
group.long 0x84++0x03
line.long 0x00 "PROTCFG,Protocol Configuration Register"
bitfld.long 0x00 0. "IPSEC_CKSUM,Configure the IPSEC checksum calculation" "Included,Not included"
if (((per.l(ad:0x8000000+0x0C))&0x8000)==0x8000)
group.long 0x94++0x03
line.long 0x00 "DECORSR,DECO Request Source Register"
rbitfld.long 0x00 31. "VALID,Job Ring number in JR field validity" "Invalid,Valid"
bitfld.long 0x00 0.--1. "JR,Job Ring number" "0,1,2,3"
else
rgroup.long 0x94++0x03
line.long 0x00 "DECORSR,DECO Request Source Register"
bitfld.long 0x00 31. "VALID,Job Ring number in JR field validity" "Invalid,Valid"
bitfld.long 0x00 0.--1. "JR,Job Ring number" "0,1,2,3"
endif
group.long 0x98++0x03
line.long 0x00 "DECO_BANK_SEL,DECO Bank Select Register"
bitfld.long 0x00 29. "REQALL,Request all" "Not requested,Requested"
bitfld.long 0x00 28. "RELALL,Release all" "Not released,Released"
bitfld.long 0x00 23. "SETNYA,Set NYA bits" "Not set,Set"
if (((per.l(ad:0x8000000+0x94))&0x80000000)==0x80000000)
group.long 0x9C++0x03
line.long 0x00 "DECORR,DECO Request Register"
rbitfld.long 0x00 17. "DEN1,Permission for the software to directly access DECO 1/CCB 1 granted" "Not granted,Granted"
rbitfld.long 0x00 16. "DEN0,Permission for the software to directly access DECO 0/CCB 0 granted" "Not granted,Granted"
bitfld.long 0x00 1. "RQD1,Direct access to DECO 1/CCB 1 request" "Not requested,Requested"
newline
bitfld.long 0x00 0. "RQD0,Direct access to DECO 0/CCB 0 request" "Not requested,Requested"
else
rgroup.long 0x9C++0x03
line.long 0x00 "DECORR,DECO Request Register"
bitfld.long 0x00 17. "DEN1,Permission for the software to directly access DECO 1/CCB 1 granted" "Not granted,Granted"
bitfld.long 0x00 16. "DEN0,Permission for the software to directly access DECO 0/CCB 0 granted" "Not granted,Granted"
bitfld.long 0x00 1. "RQD1,Direct access to DECO 1/CCB 1 request" "Not requested,Requested"
newline
bitfld.long 0x00 0. "RQD0,Direct access to DECO 0/CCB 0 request" "Not requested,Requested"
endif
if (((per.l(ad:0x8000000+0x0C))&0x8000)==0x8000)
rgroup.long 0xA0++0x03
line.long 0x00 "DECO0ICID_MS,DECO0 ICID Most Significant Half Register"
bitfld.long 0x00 31. "LCK,Lock" "Not locked,Locked"
else
group.long 0xA0++0x03
line.long 0x00 "DECO0ICID_MS,DECO0 ICID Most Significant Half Register"
bitfld.long 0x00 31. "LCK,Lock" "Not locked,Locked"
endif
group.long 0xA4++0x03
line.long 0x00 "DECO0ICID_LS,DECO0 ICID Least Significant Half Register"
bitfld.long 0x00 16. "DBMT,DECO bypass memory translation" "Not bypassed,Bypassed"
bitfld.long 0x00 15. "DPL,DECO privilege level" "Not permitted,Permitted"
hexmask.long.byte 0x00 0.--6. 1. "D_ICID,Defines the ICID value asserted for DMA transactions"
group.long 0x120++0x03
line.long 0x00 "DAR,DECO Availability Register"
bitfld.long 0x00 1. "NYA1,Start polling for the availability of DECO 1" "Not started,Started"
bitfld.long 0x00 0. "NYA0,Start polling for the availability of DECO 0" "Not started,Started"
wgroup.long 0x124++0x03
line.long 0x00 "DRR,DECO Reset Register"
bitfld.long 0x00 1. "RST1,Soft reset of DECO 1" "No reset,Reset"
bitfld.long 0x00 0. "RST0,Soft reset of DECO 0" "No reset,Reset"
group.long 0x204++0x03
line.long 0x00 "DMAC,DMA Control Register"
bitfld.long 0x00 1. "WSE,Write safe enable" "Disabled,Enabled"
bitfld.long 0x00 0. "RSE,Read safe enable" "Disabled,Enabled"
group.long 0x504++0x03
line.long 0x00 "DMA_CTRL,DMA Control Register"
bitfld.long 0x00 1. "WSE,Write safe enable" "Disabled,Enabled"
bitfld.long 0x00 0. "RSE,Read safe enable" "Disabled,Enabled"
group.long 0x220++0x03
line.long 0x00 "PBSL,Peak Bandwidth Smoothing Limit Register"
hexmask.long.byte 0x00 0.--6. 1. "PBSL,Peak bandwidth smoothing limit"
tree "DMA AXI ID Mapping Low Registers"
rgroup.long 0x240++0x13
line.long 0x00 "DMA0_AIDL_MAP_MS,Mapping For DMA AXI ID 7-4"
hexmask.long.byte 0x00 24.--31. 1. "AID7_BID,SEC block ID using AXI ID 7"
hexmask.long.byte 0x00 16.--23. 1. "AID6_BID,SEC block ID using AXI ID 6"
hexmask.long.byte 0x00 8.--15. 1. "AID5_BID,SEC block ID using AXI ID 5"
hexmask.long.byte 0x00 0.--7. 1. "AID4_BID,SEC block ID using AXI ID 4"
line.long 0x04 "DMA0_AIDL_MAP_LS,Mapping For DMA AXI ID 3-0"
hexmask.long.byte 0x04 24.--31. 1. "AID3_BID,SEC block ID using AXI ID 3"
hexmask.long.byte 0x04 16.--23. 1. "AID2_BID,SEC block ID using AXI ID 2"
hexmask.long.byte 0x04 8.--15. 1. "AID1_BID,SEC block ID using AXI ID 1"
hexmask.long.byte 0x04 0.--7. 1. "AID0_BID,SEC block ID using AXI ID 0"
line.long 0x08 "DMA0_AIDM_MAP_MS,Mapping For DMA AXI ID 15-12"
hexmask.long.byte 0x08 24.--31. 1. "AID15_BID,SEC block ID using AXI ID 15"
hexmask.long.byte 0x08 16.--23. 1. "AID14_BID,SEC block ID using AXI ID 14"
hexmask.long.byte 0x08 8.--15. 1. "AID13_BID,SEC block ID using AXI ID 13"
hexmask.long.byte 0x08 0.--7. 1. "AID12_BID,SEC block ID using AXI ID 12"
line.long 0x0C "DMA0_AIDM_MAP_LS,Mapping For DMA AXI ID 11-8"
hexmask.long.byte 0x0C 24.--31. 1. "AID11_BID,SEC block ID using AXI ID 11"
hexmask.long.byte 0x0C 16.--23. 1. "AID10_BID,SEC block ID using AXI ID 10"
hexmask.long.byte 0x0C 8.--15. 1. "AID9_BID,SEC block ID using AXI ID 9"
hexmask.long.byte 0x0C 0.--7. 1. "AID8_BID,SEC block ID using AXI ID 8"
line.long 0x10 "DMA0_AID_ENB,DMA$2 AXI ID Enable Register"
bitfld.long 0x10 15. "AID15E,AXI ID 15 enable" "Disabled,Enabled"
bitfld.long 0x10 14. "AID14E,AXI ID 14 enable" "Disabled,Enabled"
bitfld.long 0x10 13. "AID13E,AXI ID 13 enable" "Disabled,Enabled"
bitfld.long 0x10 12. "AID12E,AXI ID 12 enable" "Disabled,Enabled"
newline
bitfld.long 0x10 11. "AID11E,AXI ID 11 enable" "Disabled,Enabled"
bitfld.long 0x10 10. "AID10E,AXI ID 10 enable" "Disabled,Enabled"
bitfld.long 0x10 9. "AID9E,AXI ID 9 enable" "Disabled,Enabled"
bitfld.long 0x10 8. "AID8E,AXI ID 8 enable" "Disabled,Enabled"
newline
bitfld.long 0x10 7. "AID7E,AXI ID 7 enable" "Disabled,Enabled"
bitfld.long 0x10 6. "AID6E,AXI ID 6 enable" "Disabled,Enabled"
bitfld.long 0x10 5. "AID5E,AXI ID 5 enable" "Disabled,Enabled"
bitfld.long 0x10 4. "AID4E,AXI ID 4 enable" "Disabled,Enabled"
newline
bitfld.long 0x10 3. "AID3E,AXI ID 3 enable" "Disabled,Enabled"
bitfld.long 0x10 2. "AID2E,AXI ID 2 enable" "Disabled,Enabled"
bitfld.long 0x10 1. "AID1E,AXI ID 1 enable" "Disabled,Enabled"
bitfld.long 0x10 0. "AID0E,AXI ID 0 enable" "Disabled,Enabled"
if (((per.l(ad:0x8000000+0x260))&0x8000000000000000)==0x00)
group.quad 0x260++0x07
line.quad 0x00 "DMA0_ARD_TC,DMA0 AXI Read Timing Check Register"
bitfld.quad 0x00 63. "ARTCE,AXI read timing check enable" "Disabled,Enabled"
bitfld.quad 0x00 62. "ARCT,AXI read counter test" "Not tested,Tested"
bitfld.quad 0x00 61. "ARTT,AXI read timer test" "Not tested,Tested"
newline
bitfld.quad 0x00 60. "ARTL,AXI read timer last" "First,Last"
hexmask.quad.word 0x00 48.--59. 1. "ARL,AXI read limit"
hexmask.quad.tbyte 0x00 24.--43. 1. "ARLC,AXI read late count"
newline
hexmask.quad.tbyte 0x00 0.--19. 1. "ARSC,AXI read sample count"
else
group.quad 0x260++0x07
line.quad 0x00 "DMA0_ARD_TC,DMA0 AXI Read Timing Check Register"
bitfld.quad 0x00 63. "ARTCE,AXI read timing check enable" "Disabled,Enabled"
bitfld.quad 0x00 62. "ARCT,AXI read counter test" "Not tested,Tested"
bitfld.quad 0x00 61. "ARTT,AXI read timer test" "Not tested,Tested"
newline
bitfld.quad 0x00 60. "ARTL,AXI read timer last" "First,Last"
rhexmask.quad.word 0x00 48.--59. 1. "ARL,AXI read limit"
rhexmask.quad.tbyte 0x00 24.--43. 1. "ARLC,AXI read late count"
newline
rhexmask.quad.tbyte 0x00 0.--19. 1. "ARSC,AXI read sample count"
endif
if (((per.l(ad:0x8000000+0x260))&0x8000000000000000)==0x00)
group.long 0x26C++0x03
line.long 0x00 "DMA0_ARD_LAT,DMA0 Read Timing Check Latency Register"
else
rgroup.long 0x26C++0x03
line.long 0x00 "DMA0_ARD_LAT,DMA0 Read Timing Check Latency Register"
endif
group.quad 0x270++0x07
line.quad 0x00 "DMA0_AWR_TC,DMA0 AXI Write Timing Check Register"
bitfld.quad 0x00 63. "AWTCE,AXI write timing check enable" "Disabled,Enabled"
bitfld.quad 0x00 62. "AWCT,AXI write counter test" "Not tested,Tested"
bitfld.quad 0x00 61. "AWTT,AXI write timer test" "Not tested,Tested"
newline
hexmask.quad.word 0x00 48.--59. 1. "AWL,AXI write limit"
hexmask.quad.tbyte 0x00 24.--43. 1. "AWLC,AXI write late count"
hexmask.quad.tbyte 0x00 0.--19. 1. "AWSC,AXI write sample count"
if (((per.l(ad:0x8000000+0x270))&0x8000000000000000)==0x00)
group.long 0x27C++0x03
line.long 0x00 "DMA0_AWR_LAT,DMA0 Write Timing Check Latency Register"
else
rgroup.long 0x27C++0x03
line.long 0x00 "DMA0_AWR_LAT,DMA0 Write Timing Check Latency Register"
endif
tree.end
tree "Manufacturing Protection Registers"
repeat 64. (increment 0x300 0x01)(increment 0 1)
group.byte $1++0x00
line.byte 0x00 "MPPKR$2,Manufacturing Protection Private Key Register"
repeat.end
repeat 32. (increment 0x380 0x01)(increment 0 1)
group.byte $1++0x00
line.byte 0x00 "MPMR$2,Manufacturing Protection Message Register"
rgroup.byte ($1+0x40)++0x00
line.byte 0x00 "MPTESTR$2,Manufacturing Protection Test Register"
repeat.end
tree.end
tree "Descriptor Key Encryption Key Registers"
if (((per.l(ad:0x8000000+0xFD4))&0x300)==0x00)
repeat 8. (increment 0x400 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "JDKEKR$2,Job Descriptor Key Encryption Key Register $2"
repeat.end
repeat 8. (increment 0x420 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "TDKEKR$2,Trusted Descriptor Key Encryption Key Register $2"
repeat.end
repeat 8. (increment 0x440 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "TDSKR$2,Trusted Descriptor Signing Key Register $2"
repeat.end
else
repeat 8. (increment 0x400 0x04)(increment 0 1)
hgroup.long $1++0x03
hide.long 0x00 "JDKEKR$2,Job Descriptor Key Encryption Key Register $2"
repeat.end
repeat 8. (increment 0x420 0x04)(increment 0 1)
hgroup.long $1++0x03
hide.long 0x00 "TDKEKR0$2,Trusted Descriptor Key Encryption Key Register $2"
repeat.end
repeat 8. (increment 0x440 0x04)(increment 0 1)
hgroup.long $1++0x03
hide.long 0x00 "TDSKR$2,Trusted Descriptor Signing Key Register $2"
repeat.end
endif
tree.end
newline
if (((per.l(ad:0x8000000+0xFD4))&0x300)==0x00)
group.quad 0x4E0++0x07
line.quad 0x00 "SKNR,Secure Key Nonce Register"
hexmask.quad.word 0x00 32.--46. 1. "SK_NONCE_MS,Secure key nonce most significant bits"
hexmask.quad.long 0x00 0.--31. 1. "SK_NONCE_LS,Secure key nonce least significant bits"
else
rgroup.quad 0x4E0++0x07
line.quad 0x00 "SKNR,Secure Key Nonce Register"
hexmask.quad.word 0x00 32.--46. 1. "SK_NONCE_MS,Secure key nonce most significant bits"
hexmask.quad.long 0x00 0.--31. 1. "SK_NONCE_LS,Secure key nonce least significant bits"
endif
rgroup.long 0x50C++0x13
line.long 0x00 "DMA_STA,DMA Status Register"
bitfld.long 0x00 7. "DMA0_IDLE,DMA0 is idle" "Busy,Idle"
bitfld.long 0x00 0.--4. "DMA0_ETIF,DMA0 external transactions in flight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
line.long 0x04 "DMA_X_AID_7_4_MAP,Mapping for DMA AXI IDs 7-4 Register"
hexmask.long.byte 0x04 24.--31. 1. "AID7_BID,SEC block ID using AXI ID 7"
hexmask.long.byte 0x04 16.--23. 1. "AID6_BID,SEC block ID using AXI ID 6"
hexmask.long.byte 0x04 8.--15. 1. "AID5_BID,SEC block ID using AXI ID 5"
newline
hexmask.long.byte 0x04 0.--7. 1. "AID4_BID,SEC block ID using AXI ID 4"
line.long 0x08 "DMA_X_AID_3_0_MAP,Mapping for DMA AXI IDs 3-0 Register"
hexmask.long.byte 0x08 24.--31. 1. "AID3_BID,SEC block ID using AXI ID 3"
hexmask.long.byte 0x08 16.--23. 1. "AID2_BID,SEC block ID using AXI ID 2"
hexmask.long.byte 0x08 8.--15. 1. "AID1_BID,SEC block ID using AXI ID 1"
newline
hexmask.long.byte 0x08 0.--7. 1. "AID0_BID,SEC block ID using AXI ID 0"
line.long 0x0C "DMA_X_AID_15_12_MAP,Mapping for DMA AXI IDs 15-12 Register"
hexmask.long.byte 0x0C 24.--31. 1. "AID15_BID,SEC block ID using AXI ID 15"
hexmask.long.byte 0x0C 16.--23. 1. "AID14_BID,SEC block ID using AXI ID 14"
hexmask.long.byte 0x0C 8.--15. 1. "AID13_BID,SEC block ID using AXI ID 13"
newline
hexmask.long.byte 0x0C 0.--7. 1. "AID12_BID,SEC block ID using AXI ID 12"
line.long 0x10 "DMA_X_AID_11_8_MAP,Mapping for DMA AXI IDs 11-8 Register"
hexmask.long.byte 0x10 24.--31. 1. "AID11_BID,SEC block ID using AXI ID 11"
hexmask.long.byte 0x10 16.--23. 1. "AID10_BID,SEC block ID using AXI ID 10"
hexmask.long.byte 0x10 8.--15. 1. "AID9_BID,SEC block ID using AXI ID 9"
newline
hexmask.long.byte 0x10 0.--7. 1. "AID8_BID,SEC block ID using AXI ID 8"
rgroup.long 0x524++0x03
line.long 0x00 "DMA_X_AID_15_0_EN,DMA_X AXI ID Map Enable Register"
bitfld.long 0x00 15. "AID15E,DMA engine 15 enable" "Disabled,Enabled"
bitfld.long 0x00 14. "AID14E,DMA engine 14 enable" "Disabled,Enabled"
bitfld.long 0x00 13. "AID13E,DMA engine 13 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 12. "AID12E,DMA engine 12 enable" "Disabled,Enabled"
bitfld.long 0x00 11. "AID11E,DMA engine 11 enable" "Disabled,Enabled"
bitfld.long 0x00 10. "AID10E,DMA engine 10 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 9. "AID9E,DMA engine 9 enable" "Disabled,Enabled"
bitfld.long 0x00 8. "AID8E,DMA engine 8 enable" "Disabled,Enabled"
bitfld.long 0x00 7. "AID7E,DMA engine 7 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 6. "AID6E,DMA engine 6 enable" "Disabled,Enabled"
bitfld.long 0x00 5. "AID5E,DMA engine 5 enable" "Disabled,Enabled"
bitfld.long 0x00 4. "AID4E,DMA engine 4 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 3. "AID3E,DMA engine 3 enable" "Disabled,Enabled"
bitfld.long 0x00 2. "AID2E,DMA engine 2 enable" "Disabled,Enabled"
bitfld.long 0x00 1. "AID1E,DMA engine 1 enable" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "AID0E,DMA engine 0 enable" "Disabled,Enabled"
group.long 0x530++0x03
line.long 0x00 "DMA_X_ARTC_CTL,DMA_X AXI Read Timing Check Control Register"
bitfld.long 0x00 31. "ARTCE,AXI Read timing check enable" "Disabled,Enabled"
bitfld.long 0x00 30. "ARCT,AXI Read counter test" "Not tested,Tested"
bitfld.long 0x00 29. "ARTT,AXI read timer test" "Not tested,Tested"
newline
bitfld.long 0x00 28. "ARTL,AXI Read Timer Last" "First,Last"
hexmask.long.word 0x00 16.--27. 1. "ARL,AXI Read Limit"
hexmask.long.word 0x00 0.--11. 1. "ART,AXI Read Timer"
if (((per.l(ad:0x8000000+0x530))&0x80000000)==0x00)
group.long 0x534++0x0B
line.long 0x00 "DMA_X_ARTC_LC,DMA_X AXI Read Timing Check Late Count Register"
hexmask.long.tbyte 0x00 0.--19. 1. "ARLC,AXI read late count"
line.long 0x04 "DMA_X_ARTC_SC,DMA_X AXI Read Timing Check Sample Count Register"
hexmask.long.tbyte 0x04 0.--19. 1. "ARSC,AXI read sample count"
line.long 0x08 "DMA_X_ARTC_LAT,DMA_X Read Timing Check Latency Register"
else
rgroup.long 0x534++0x0B
line.long 0x00 "DMA_X_ARTC_LC,DMA_X AXI Read Timing Check Late Count Register"
hexmask.long.tbyte 0x00 0.--19. 1. "ARLC,AXI read late count"
line.long 0x04 "DMA_X_ARTC_SC,DMA_X AXI Read Timing Check Sample Count Register"
hexmask.long.tbyte 0x04 0.--19. 1. "ARSC,AXI read sample count"
line.long 0x08 "DMA_X_ARTC_LAT,DMA_X Read Timing Check Latency Register"
endif
group.long 0x540++0x03
line.long 0x00 "DMA_X_AWTC_CTL,DMA_X AXI Write Timing Check Control Register"
bitfld.long 0x00 31. "AWTCE,AXI Write timing check enable" "Disabled,Enabled"
bitfld.long 0x00 30. "AWCT,AXI Write counter test" "Not tested,Tested"
bitfld.long 0x00 29. "AWTT,AXI Write timer test" "Not tested,Tested"
newline
hexmask.long.word 0x00 16.--27. 1. "AWL,AXI Write limit"
hexmask.long.word 0x00 0.--11. 1. "AWT,AXI Write timer"
if (((per.l(ad:0x8000000+0x540))&0x80000000)==0x00)
group.long 0x544++0x0B
line.long 0x00 "DMA_X_AWTC_LC,DMA_X AXI Write Timing Check Late Count Register"
hexmask.long.tbyte 0x00 0.--19. 1. "AWLC,AXI write late count"
line.long 0x04 "DMA_X_AWTC_SC,DMA_X AXI Write Timing Check Sample Count Register"
hexmask.long.tbyte 0x04 0.--19. 1. "AWSC,AXI write sample count"
line.long 0x08 "DMA_X_AWTC_LAT,DMA_X Write Timing Check Latency Register"
else
rgroup.long 0x544++0x0B
line.long 0x00 "DMA_X_AWTC_LC,DMA_X AXI Write Timing Check Late Count Register"
hexmask.long.tbyte 0x00 0.--19. 1. "AWLC,AXI write late count"
line.long 0x04 "DMA_X_AWTC_SC,DMA_X AXI Write Timing Check Sample Count Register"
hexmask.long.tbyte 0x04 0.--19. 1. "AWSC,AXI write sample count"
line.long 0x08 "DMA_X_AWTC_LAT,DMA_X Write Timing Check Latency Register"
endif
tree "RNG (Random-Number Generator) Registers"
if ((per.l(ad:0x8000000+0x600)&0x10000)==0x10000)
group.long 0x600++0x0F
line.long 0x00 "RTMCTL,RNG TRNG Miscellaneous Control Register"
bitfld.long 0x00 16. "PRGM,Programming mode select" "Run mode,Program mode"
rbitfld.long 0x00 15. "OSC2_FAIL,Oscillator 2 has failed" "Not failed,Failed"
bitfld.long 0x00 14. "LRUN_CONT,Long run count continues between entropy generations" "Restarted,Run"
newline
rbitfld.long 0x00 13. "TSTOP_OK,TRNG ring oscillator stopped" "Running,Stopped"
eventfld.long 0x00 12. "ERR,Error status" "Not detected,Detected"
rbitfld.long 0x00 11. "TST_OUT,Test point inside ring oscillator" "0,1"
newline
rbitfld.long 0x00 10. "ENT_VAL,Entropy valid" "Not valid,Valid"
rbitfld.long 0x00 9. "FCT_VAL,Frequency count valid" "Not valid,Valid"
rbitfld.long 0x00 8. "FCT_FAIL,Frequency count fail" "Not failed,Failed"
newline
bitfld.long 0x00 7. "FORCE_SYSCLK,Force system clock" "Ring oscillator,TRNG"
bitfld.long 0x00 6. "RST_DEF,Reset defaults" "No reset,Reset"
bitfld.long 0x00 5. "TRNG_ACC,TRNG access mode" "Not set,Set"
newline
bitfld.long 0x00 4. "CLK_OUT_EN,Clock output enable" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "OSC_DIV,Oscillator divide" "No divide,/2,/4,/8"
bitfld.long 0x00 0.--1. "SAMP_MODE,Sample mode [Entropy shifter/Statistical checker]" "Von Neumann/Von Neumann,Raw/Von Neumann,Von Neumann/Raw,?..."
line.long 0x04 "RTSCMISC,RNG TRNG Statistical Check Miscellaneous Register"
bitfld.long 0x04 16.--19. "RTY_CNT,Retry count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x04 0.--7. 1. "LRUN_MAX,Long run max limit"
line.long 0x08 "RTPKRRNG,RNG TRNG Poker Range Register"
hexmask.long.word 0x08 0.--15. 1. "PKR_RNG,Poker range"
line.long 0x0C "RTPKRMAX,RNG TRNG Poker Maximum Limit Register"
hexmask.long.tbyte 0x0C 0.--23. 1. "PKR_MAX,Poker maximum limit"
else
group.long 0x600++0x03
line.long 0x00 "RTMCTL,RNG TRNG Miscellaneous Control Register"
bitfld.long 0x00 16. "PRGM,Programming mode select" "Run mode,Program mode"
rbitfld.long 0x00 15. "OSC2_FAIL,Oscillator 2 has failed" "Not failed,Failed"
bitfld.long 0x00 14. "LRUN_CONT,Long run count continues between entropy generations" "Restarted,Run"
newline
rbitfld.long 0x00 13. "TSTOP_OK,TRNG ring oscillator stopped" "Running,Stopped"
eventfld.long 0x00 12. "ERR,Error status" "Not detected,Detected"
rbitfld.long 0x00 11. "TST_OUT,Test point inside ring oscillator" "0,1"
newline
rbitfld.long 0x00 10. "ENT_VAL,Entropy valid" "Not valid,Valid"
rbitfld.long 0x00 9. "FCT_VAL,Frequency count valid" "Not valid,Valid"
rbitfld.long 0x00 8. "FCT_FAIL,Frequency count fail" "Not failed,Failed"
newline
rbitfld.long 0x00 7. "FORCE_SYSCLK,Force system clock" "Ring oscillator,TRNG"
rbitfld.long 0x00 6. "RST_DEF,Reset defaults" "No reset,Reset"
bitfld.long 0x00 5. "TRNG_ACC,TRNG access mode" "Not set,Set"
newline
bitfld.long 0x00 4. "CLK_OUT_EN,Clock output enable" "Disabled,Enabled"
rbitfld.long 0x00 2.--3. "OSC_DIV,Oscillator divide" "No divide,/2,/4,/8"
rbitfld.long 0x00 0.--1. "SAMP_MODE,Sample mode [Entropy shifter/Statistical checker]" "Von Neumann/Von Neumann,Raw/Von Neumann,Von Neumann/Raw,?..."
hgroup.long 0x604++0x03
hide.long 0x00 "RTSCMISC,RNG TRNG Statistical Check Miscellaneous Register"
hgroup.long 0x608++0x03
hide.long 0x00 "RTPKRRNG,RNG TRNG Poker Range Register"
rgroup.long 0x60C++0x03
line.long 0x00 "RTPKRSQ,RNG TRNG Poker Square Calculation Result Register"
hexmask.long.tbyte 0x00 0.--23. 1. "PKR_SQ,Poker square calculation result"
endif
if ((per.l(ad:0x8000000+0x600)&0x10000)==0x10000)
group.long 0x610++0x03
line.long 0x00 "RTSDCTL,RNG TRNG Seed Control Register"
hexmask.long.word 0x00 16.--31. 1. "ENT_DLY,Entropy delay"
hexmask.long.word 0x00 0.--15. 1. "SAMP_SIZE,Sample size"
else
rgroup.long 0x610++0x03
line.long 0x00 "RTSDCTL,RNG TRNG Seed Control Register"
hexmask.long.word 0x00 16.--31. 1. "ENT_DLY,Entropy delay"
hexmask.long.word 0x00 0.--15. 1. "SAMP_SIZE,Sample size"
endif
if ((per.l(ad:0x8000000+0x600)&0x10000)==0x10000)
group.long 0x614++0x03
line.long 0x00 "RTSBLIM,RNG TRNG Sparse Bit Limit Register"
hexmask.long.word 0x00 0.--9. 1. "SB_LIM,Sparse bit limit"
else
rgroup.long 0x614++0x03
line.long 0x00 "RTTOTSAM,RNG TRNG Total Samples Register"
hexmask.long.tbyte 0x00 0.--19. 1. "TOT_SAM,Total samples"
endif
if ((per.l(ad:0x8000000+0x600)&0x10000)==0x10000)
group.long 0x618++0x23
line.long 0x00 "RTFRQMIN,RNG TRNG Frequency Count Minimum Limit Register"
hexmask.long.tbyte 0x00 0.--21. 1. "FRQ_MIN,Frequency count minimum limit"
line.long 0x04 "RTFRQMAX,RNG TRNG Frequency Count Maximum Limit Register"
hexmask.long.tbyte 0x04 0.--21. 1. "FRQ_MAX,Frequency counter maximum limit"
line.long 0x08 "RTSCML,RNG TRNG Statistical Check Monobit Limit Register"
hexmask.long.word 0x08 16.--31. 1. "MONO_RNG,Monobit range"
hexmask.long.word 0x08 0.--15. 1. "MONO_MAX,Monobit maximum limit"
line.long 0x0C "RTSCR1L,RNG TRNG Statistical Check Run Length 1 Limit Register"
hexmask.long.word 0x0C 16.--30. 1. "RUN1_RNG,Run length 1 range"
hexmask.long.word 0x0C 0.--14. 1. "RUN1_MAX,Run length 1 maximum limit"
line.long 0x10 "RTSCR2L,RNG TRNG Statistical Check Run Length 2 Limit Register"
hexmask.long.word 0x10 16.--29. 1. "RUN2_RNG,Run length 2 range"
hexmask.long.word 0x10 0.--13. 1. "RUN2_MAX,Run length 2 maximum limit"
line.long 0x14 "RTSCR3L,RNG TRNG Statistical Check Run Length 3 Limit Register"
hexmask.long.word 0x14 16.--28. 1. "RUN3_RNG,Run length 3 range"
hexmask.long.word 0x14 0.--12. 1. "RUN3_MAX,Run length 3 maximum limit"
line.long 0x18 "RTSCR4L,RNG TRNG Statistical Check Run Length 4 Limit Register"
hexmask.long.word 0x18 16.--27. 1. "RUN4_RNG,Run length 4 range"
hexmask.long.word 0x18 0.--11. 1. "RUN4_MAX,Run length 4 maximum limit"
line.long 0x1C "RTSCR5L,RNG TRNG Statistical Check Run Length 5 Limit Register"
hexmask.long.word 0x1C 16.--26. 1. "RUN5_RNG,Run length 5 range"
hexmask.long.word 0x1C 0.--10. 1. "RUN5_MAX,Run length 5 maximum limit"
line.long 0x20 "RTSCR6PL,RNG TRNG Statistical Check Run Length 6+ Limit Register"
hexmask.long.word 0x20 16.--26. 1. "RUN6P_RNG,Run length 6+ range"
hexmask.long.word 0x20 0.--10. 1. "RUN6P_MAX,Run length 6+ maximum limit"
else
rgroup.long 0x618++0x23
line.long 0x00 "RTFRQCNT2,RNG TRNG Oscillator 2 Frequency Count Register"
hexmask.long.tbyte 0x00 0.--21. 1. "FRQ_CNT,Frequency count"
line.long 0x04 "RTFRQCNT,RNG TRNG Frequency Count Register"
hexmask.long.tbyte 0x04 0.--21. 1. "FRQ_CNT,Frequency count"
line.long 0x08 "RTSCMC,RNG TRNG Statistical Check Monobit Count Register"
hexmask.long.word 0x08 0.--15. 1. "MONO_CNT,Monobit count"
line.long 0x0C "RTSCR1C,RNG TRNG Statistical Check Run Length 1 Count Register"
hexmask.long.word 0x0C 16.--30. 1. "R1_1_COUNT,Runs of one length 1 count"
hexmask.long.word 0x0C 0.--14. 1. "R1_0_COUNT,Runs of zero length 1 count"
line.long 0x10 "RTSCR2C,RNG TRNG Statistical Check Run Length 2 Count Register"
hexmask.long.word 0x10 16.--29. 1. "R2_1_COUNT,Runs of one length 2 count"
hexmask.long.word 0x10 0.--13. 1. "R2_0_COUNT,Runs of zero length 2 count"
line.long 0x14 "RTSCR3C,RNG TRNG Statistical Check Run Length 3 Count Register"
hexmask.long.word 0x14 16.--28. 1. "R3_1_COUNT,Runs of one length 3 count"
hexmask.long.word 0x14 0.--12. 1. "R3_0_COUNT,Runs of zero length 3 count"
line.long 0x18 "RTSCR4C,RNG TRNG Statistical Check Run Length 4 Count Register"
hexmask.long.word 0x18 16.--27. 1. "R4_1_COUNT,Runs of One Length 4 Count"
hexmask.long.word 0x18 0.--11. 1. "R4_0_COUNT,Runs of zero length 4 count"
line.long 0x1C "RTSCR5C,RNG TRNG Statistical Check Run Length 5 Count Register"
hexmask.long.word 0x1C 16.--26. 1. "R5_1_COUNT,Runs of one length 5 count"
hexmask.long.word 0x1C 0.--10. 1. "R5_0_COUNT,Runs of zero length 5 count"
line.long 0x20 "RTSCR6PC,RNG TRNG Statistical Check Run Length 6+ Count Register"
hexmask.long.word 0x20 16.--26. 1. "R6P_1_COUNT,Runs of one length 6+ count"
hexmask.long.word 0x20 0.--10. 1. "R6P_0_COUNT,Runs of zero length 6+ count"
endif
rgroup.long 0x63C++0x03
line.long 0x00 "RTSTATUS,RNG TRNG Status Register"
bitfld.long 0x00 16.--19. "RETRY_COUNT,Retry count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 15. "FMBTF,Mono bit test fail" "Not failed,Failed"
bitfld.long 0x00 14. "FPTF,Poker test fail" "Not failed,Failed"
newline
bitfld.long 0x00 13. "FLRTF,Long run test fail" "Not failed,Failed"
bitfld.long 0x00 12. "FSBTF,Sparse bit test fail" "Not failed,Failed"
bitfld.long 0x00 11. "F6PBR1TF,6 plus bit run sampling 1s test fail" "Not failed,Failed"
newline
bitfld.long 0x00 10. "F6PBR0TF,6 plus bit run sampling 0s test fail" "Not failed,Failed"
bitfld.long 0x00 9. "F5BR1TF,5-bit run sampling 1s test fail" "Not failed,Failed"
bitfld.long 0x00 8. "F5BR0TF,5-bit run sampling 0s test fail" "Not failed,Failed"
newline
bitfld.long 0x00 7. "F4BR1TF,4-bit run sampling 1s test fail" "Not failed,Failed"
bitfld.long 0x00 6. "F4BR0TF,4-bit run sampling 0s test fail" "Not failed,Failed"
bitfld.long 0x00 5. "F3BR1TF,3-bit run sampling 1s test fail" "Not failed,Failed"
newline
bitfld.long 0x00 4. "F3BR01TF,3-bit run sampling 0s test fail" "Not failed,Failed"
bitfld.long 0x00 3. "F2BR1TF,2-bit run sampling 1s test fail" "Not failed,Failed"
bitfld.long 0x00 2. "F2BR0TF,2-bit run sampling 0s test fail" "Not failed,Failed"
newline
bitfld.long 0x00 1. "F1BR1TF,1-bit run sampling 1s test fail" "Not failed,Failed"
bitfld.long 0x00 0. "F1BR0TF,1-bit run sampling 0s test fail" "Not failed,Failed"
repeat 15. (increment 0x640 0x04)(increment 0. 1.)
group.long $1++0x03
line.long 0x00 "RTENT$2,RNG TRNG Entropy Read Register $2"
repeat.end
hgroup.long 0x67C++0x03
hide.long 0x00 "RTENT15,RNG TRNG Entropy Read Register 15"
in
newline
if (((per.l(ad:0x8000000+0x600))&0x10000)==0x00)
rgroup.long 0x680++0x1F
line.long 0x00 "RTPKRCNT10,RNG TRNG Statistical Check Poker Count 1 and 0 Register"
hexmask.long.word 0x00 16.--31. 1. "PKR_1_CNT,Poker 1h count"
hexmask.long.word 0x00 0.--15. 1. "PKR_0_CNT,Poker 0h count"
line.long 0x04 "RTPKRCNT32,RNG TRNG Statistical Check Poker Count 3 and 2 Register"
hexmask.long.word 0x04 16.--31. 1. "PKR_3_CNT,Poker 3h count"
hexmask.long.word 0x04 0.--15. 1. "PKR_2_CNT,Poker 2h count"
line.long 0x08 "RTPKRCNT54,RNG TRNG Statistical Check Poker Count 5 and 4 Register"
hexmask.long.word 0x08 16.--31. 1. "PKR_5_CNT,Poker 5h count"
hexmask.long.word 0x08 0.--15. 1. "PKR_4_CNT,Poker 4h count"
line.long 0x0C "RTPKRCNT76,RNG TRNG Statistical Check Poker Count 7 and 6 Register"
hexmask.long.word 0x0C 16.--31. 1. "PKR_7_CNT,Poker 7h count"
hexmask.long.word 0x0C 0.--15. 1. "PKR_6_CNT,Poker 6h count"
line.long 0x10 "RTPKRCNT98,RNG TRNG Statistical Check Poker Count 9 and 8 Register"
hexmask.long.word 0x10 16.--31. 1. "PKR_9_CNT,Poker 9h count"
hexmask.long.word 0x10 0.--15. 1. "PKR_8_CNT,Poker 8h count"
line.long 0x14 "RTPKRCNTBA,RNG TRNG Statistical Check Poker Count B and A Register"
hexmask.long.word 0x14 16.--31. 1. "PKR_B_CNT,Poker Bh count"
hexmask.long.word 0x14 0.--15. 1. "PKR_A_CNT,Poker Ah count"
line.long 0x18 "RTPKRCNTDC,RNG TRNG Statistical Check Poker Count D and C Register"
hexmask.long.word 0x18 16.--31. 1. "PKR_D_CNT,Poker Dh count"
hexmask.long.word 0x18 0.--15. 1. "PKR_C_CNT,Poker Ch count"
line.long 0x1C "RTPKRCNTFE,RNG TRNG Statistical Check Poker Count F and E Register"
hexmask.long.word 0x1C 16.--31. 1. "PKR_F_CNT,Poker Fh count"
hexmask.long.word 0x1C 0.--15. 1. "PKR_E_CNT,Poker Eh count"
rgroup.long 0x6C0++0x03
line.long 0x00 "RDSTA,RNG DRNG Status Register"
bitfld.long 0x00 31. "SKVT,Secure key valid test" "Not generated,Generated"
bitfld.long 0x00 30. "SKVN,Secure key valid non-test" "Not generated,Generated"
bitfld.long 0x00 20. "CE,Catastrophic error" "No error,Error"
newline
bitfld.long 0x00 16.--19. "ERRCODE,Error code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 13. "ZSH1,State handle 1 zeroized" "Not zeroized,Zeroized"
bitfld.long 0x00 12. "ZSH0,State handle 0 zeroized" "Not zeroized,Zeroized"
newline
bitfld.long 0x00 9. "TF1,Test flag state handle 1" "Not tested,Tested"
bitfld.long 0x00 8. "TF0,Test flag state handle 0" "Not tested,Tested"
bitfld.long 0x00 5. "PR1,Prediction resistance flag state handle 1" "Not instantiated,Instantiated"
newline
bitfld.long 0x00 4. "PR0,Prediction resistance flag state handle 0" "Not instantiated,Instantiated"
bitfld.long 0x00 1. "IF1,Instantiated flag state handle 1" "Not instantiated,Instantiated"
bitfld.long 0x00 0. "IF0,Instantiated flag state handle 0" "Not instantiated,Instantiated"
else
hgroup.long 0x680++0x03
hide.long 0x00 "RTPKRCNT10,RNG TRNG Statistical Check Poker Count 1 and 0 Register"
hgroup.long 0x684++0x03
hide.long 0x00 "RTPKRCNT32,RNG TRNG Statistical Check Poker Count 3 and 2 Register"
hgroup.long 0x688++0x03
hide.long 0x00 "RTPKRCNT54,RNG TRNG Statistical Check Poker Count 5 and 4 Register"
hgroup.long 0x68C++0x03
hide.long 0x00 "RTPKRCNT76,RNG TRNG Statistical Check Poker Count 7 and 6 Register"
hgroup.long 0x690++0x03
hide.long 0x00 "RTPKRCNT98,RNG TRNG Statistical Check Poker Count 9 and 8 Register"
hgroup.long 0x694++0x03
hide.long 0x00 "RTPKRCNTBA,RNG TRNG Statistical Check Poker Count B and A Register"
hgroup.long 0x698++0x03
hide.long 0x00 "RTPKRCNTDC,RNG TRNG Statistical Check Poker Count D and C Register"
hgroup.long 0x69C++0x03
hide.long 0x00 "RTPKRCNTFE,RNG TRNG Statistical Check Poker Count F and E Register"
hgroup.long 0x6C0++0x03
hide.long 0x00 "RDSTA,RNG DRNG Status Register"
endif
rgroup.long 0x6D0++0x07
line.long 0x00 "RDINT0,RNG DRNG State Handle 0 Reseed Interval Register"
line.long 0x04 "RDINT1,RNG DRNG State Handle 1 Reseed Interval Register"
group.long 0x6E0++0x03
line.long 0x00 "RDHCNTL,RNG DRNG Hash Control Register"
bitfld.long 0x00 4. "HTC,Hashing test mode clear" "No effect,Clear"
bitfld.long 0x00 3. "HTM,Hashing test mode" "Disabled,Enabled"
bitfld.long 0x00 2. "HI,Hashing initialize" "No effect,Initialize"
newline
bitfld.long 0x00 1. "HB,Hashing begin" "No effect,Begin"
rbitfld.long 0x00 0. "HD,Hashing done" "Not done,Done"
newline
hgroup.long 0x6E4++0x03
hide.long 0x00 "RDHDIG,RNG DRNG Hash Digest Register"
in
newline
if (((per.l(ad:0x8000000+0x6E0))&0x08)==0x08)
wgroup.long 0x6E8++0x03
line.long 0x00 "RDHBUF,RNG DRNG Hash Buffer Register"
else
hgroup.long 0x6E8++0x03
hide.long 0x00 "RDHBUF,RNG DRNG Hash Buffer Register"
endif
group.long 0x6EC++0x03
line.long 0x00 "OSC2_CTL,RNG Oscillator 2 Control Register"
bitfld.long 0x00 14. "OSC_FAILSAFE_TEST,Oscillator 2 disable for dual-oscillator mode" "No,Yes"
bitfld.long 0x00 12.--13. "OSC_FAILSAFE_LIMIT,Failsafe limit for determining oscillator failure" "2^12,2^16,2^20,2^22"
rbitfld.long 0x00 11. "OSC2_TST_OUT,Test point inside ring oscillator 2" "0,1"
newline
rbitfld.long 0x00 9. "OSC2_TST_OUT,Oscillator 2 frequency count valid" "Not valid,Valid"
bitfld.long 0x00 4. "OSC2_OUT_EN,Oscillator 2 output enable" "Disabled,Enabled"
bitfld.long 0x00 2.--3. "OSC2_DIV,Oscillator 2 divide control" "Not divided,/2,/4,/8"
newline
bitfld.long 0x00 0.--1. "TRNG_ENT_CTL,TRNG entropy generation control" "Single OSC1,Dual OSC,Single OSC2,?..."
tree.end
newline
group.long 0xB00++0x03
line.long 0x00 "REIS,Recoverable Error Interrupt Status"
eventfld.long 0x00 27. "JBAE3,Job ring 3 bus access error" "No error,Error"
eventfld.long 0x00 26. "JBAE2,Job ring 2 bus access error" "No error,Error"
eventfld.long 0x00 25. "JBAE1,Job ring 1 bus access error" "No error,Error"
newline
eventfld.long 0x00 24. "JBAE0,Job ring 0 bus access error" "No error,Error"
eventfld.long 0x00 16. "RBAE,SEC RTIC bus access error" "No error,Error"
eventfld.long 0x00 0. "CWDE,The SEC watchdog timer expired" "Not expired,Expired"
group.long 0xB0C++0x03
line.long 0x00 "REIH,Recoverable Error Interrupt Halt"
bitfld.long 0x00 27. "JBAE3,Halt SEC if JR3-initiated job execution caused bus access error" "Not halted,Halted"
bitfld.long 0x00 26. "JBAE2,Halt SEC if JR2-initiated job execution caused bus access error" "Not halted,Halted"
bitfld.long 0x00 25. "JBAE1,Halt SEC if JR1-initiated job execution caused bus access error" "Not halted,Halted"
newline
bitfld.long 0x00 24. "JBAE0,Halt SEC if JR0-initiated job execution caused bus access error" "Not halted,Halted"
bitfld.long 0x00 16. "RBAE,Halt SEC if RTIC-initiated job execution caused bus access error" "Not halted,Halted"
bitfld.long 0x00 0. "CWDE,Halt SEC if SEC watchdog timer expires" "Not halted,Halted"
repeat 9. (list 0xBF8 0xFF8 0x10FF8 0x20FF8 0x30FF8 0x40FF8 0x60FF8 0x80FF8 0x90FF8)(increment 0 1)
rgroup.long $1++0x07
line.long 0x00 "SECVID_MS_$2,SEC Version ID Alias $2 Register Most Significant Half"
hexmask.long.word 0x00 16.--31. 1. "IP_ID,ID for SEC"
hexmask.long.byte 0x00 8.--15. 1. "MAJ_REV,Major revision number for SEC"
hexmask.long.byte 0x00 0.--7. 1. "MIN_REV,Minor revision number for SEC"
line.long 0x04 "SECVID_LS_$2,SEC Version ID Alias $2 Register Least Significant Half"
hexmask.long.byte 0x04 24.--31. 1. "COMPILE_OPT,Compile options for SEC"
hexmask.long.byte 0x04 16.--23. 1. "INTG_OPT,Integration options for SEC"
hexmask.long.byte 0x04 8.--15. 1. "ECO_REV,ECO revision for SEC"
newline
hexmask.long.byte 0x04 0.--7. 1. "CONFIG_OPT,Configuration options for SEC"
repeat.end
newline
hgroup.quad 0xC00++0x07
hide.quad 0x00 "HT0_JD_ADDR,Holding Tank 0 Job Descriptor Address Register"
in
newline
rgroup.quad 0xC08++0x07
line.quad 0x00 "HT0_SD_ADDR,Holding Tank 0 Shared Descriptor Address"
hexmask.quad 0x00 0.--48. 0x01 "SD_ADDR,Shared descriptor address"
rgroup.long 0xC10++0x07
line.long 0x00 "HT0_JQ_CTRL_MS,Holding Tank 0 Job Queue Control Most Significant Half Register"
bitfld.long 0x00 29. 16. "WHL,Shared or burst" "No prefetch,Whole job desc./No data,Shared desc./No data,Whole job desc./In data"
bitfld.long 0x00 28. "FOUR,Four words" "Less,At least"
bitfld.long 0x00 27. "ILE,Immediate little endian" "Not swapped,Swapped"
newline
bitfld.long 0x00 22.--26. "SHR_FROM,Share from" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
bitfld.long 0x00 19. "DWORD_SWAP,Double word swap" "MS-LS,LS-MS"
bitfld.long 0x00 17.--18. "HT_ERROR,Holding tank error" "None,Job/Shared desc. length,Job ring/QI shared/Job ring job desc.,?..."
newline
bitfld.long 0x00 15. "AMTD,Allow make trusted descriptor" "Not allowed,Allowed"
bitfld.long 0x00 8.--10. "SRC,Job source" "Job Ring 0,Job Ring 1,Job Ring 2,Job Ring 3,RTIC,?..."
bitfld.long 0x00 0.--3. "ID,Job ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "HT0_JQ_CTRL_LS,Holding Tank 0 Job Queue Control Least Significant Half Register"
bitfld.long 0x04 31. "CTL_PL,Control privilege level" "Low,High"
hexmask.long.byte 0x04 16.--22. 1. "CTL_ICID,Control ICID"
bitfld.long 0x04 15. "OUT_PL,Output privilege level" "Low,High"
newline
hexmask.long.byte 0x04 0.--6. 1. "OUT_ICID,Output ICID value"
newline
hgroup.long 0xC18++0x03
hide.long 0x00 "HT0_STATUS,Holding Tank Status Register"
in
newline
rgroup.long 0xC1C++0x03
line.long 0x00 "HT0_PEND,Holding Tank Pending Status Register"
bitfld.long 0x00 1. "PEND_1,Pending for DECO 1" "Not pending,Pending"
bitfld.long 0x00 0. "PEND_0,Pending for DECO 0" "Not pending,Pending"
group.long 0xC24++0x03
line.long 0x00 "JQ_DEBUG_SEL,Job Queue Debug Select Register"
rbitfld.long 0x00 16.--19. "JOB_ID,Job ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 0.--1. "HT_SEL,Holding tank select" "0,1,2,3"
rgroup.long 0xC40++0x07
line.long 0x00 "JQ_DMA_OUTSTANDING_WC,Job Queue DMA Outstanding Write Count Register"
hexmask.long.byte 0x00 0.--7. 1. "JQ_DMA_OUTSTANDING_WC,Job queue DMA outstanding write count"
line.long 0x04 "JQ_DMA_OUTSTANDING_RC,Job Queue DMA Outstanding Read Count Register"
hexmask.long.byte 0x04 0.--7. 1. "JQ_DMA_OUTSTANDING_WC,Job queue DMA outstanding read count"
rgroup.long 0xC4C++0x0F
line.long 0x00 "TOT_JR_JC,Total Job Ring Job Count Register"
hexmask.long.byte 0x00 0.--7. 1. "TOT_JR_JC,Total job ring job count"
line.long 0x04 "TOT_AA_JC,Total Address Array Job Count Register"
hexmask.long.byte 0x04 0.--7. 1. "TOT_AA_JC,Total address array job count"
line.long 0x08 "TOT_HT_WJ,Total Number Of Holding Tanks With Jobs Register"
hexmask.long.byte 0x08 0.--7. 1. "TOT_HT_WJ,Total number of holding tanks with jobs"
line.long 0x0C "TOT_JR_JW,Total Job Ring Jobs Waiting Register"
hexmask.long.byte 0x0C 0.--7. 1. "TOT_JR_JW,Total job ring jobs waiting"
rgroup.long 0xDBC++0x03
line.long 0x00 "JRJIDU_LS,Job Ring Job IDs in Use Register Least Significant Half"
bitfld.long 0x00 7. "JID7,Job ID 7 is currently in use" "Not used,Used"
bitfld.long 0x00 6. "JID6,Job ID 6 is currently in use" "Not used,Used"
bitfld.long 0x00 5. "JID5,Job ID 5 is currently in use" "Not used,Used"
newline
bitfld.long 0x00 4. "JID4,Job ID 4 is currently in use" "Not used,Used"
bitfld.long 0x00 3. "JID3,Job ID 3 is currently in use" "Not used,Used"
bitfld.long 0x00 2. "JID2,Job ID 2 is currently in use" "Not used,Used"
newline
bitfld.long 0x00 1. "JID1,Job ID 1 is currently in use" "Not used,Used"
bitfld.long 0x00 0. "JID0,Job ID 0 is currently in use" "Not used,Used"
newline
hgroup.long 0xDC0++0x03
hide.long 0x00 "JRJDJIFBC,Job Ring Job-Done Job ID FIFO BC"
in
newline
rgroup.long 0xDC4++0x03
line.long 0x00 "JRJDJIF,Job Ring Job-Done Job ID FIFO"
bitfld.long 0x00 0.--4. "JOB_ID_ENTRY,Job ID entry" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
rgroup.long 0xDE4++0x03
line.long 0x00 "JRJDS1,Job Ring Job-Done Source 1"
bitfld.long 0x00 31. "VALID,JQ_DEBUG_SEL.JOB_ID-specified job completion-status" "Not valid,Valid"
bitfld.long 0x00 0.--1. "SRC,Number of the Job Ring being the source of a job with completion status waiting to be written to an output ring" "0,1,2,3"
rgroup.quad 0xE00++0x07
line.quad 0x00 "JRJDDA,Job Ring Job-Done Descriptor Address 0 Register"
hexmask.quad 0x00 0.--48. 0x01 "JD_ADDR,Job descriptor address"
tree "Version Registers"
repeat 8. (list 0xE80 0x10E80 0x20E80 0x30E80 0x40E80 0x60E80 0x80E80 0x90E80)(increment 0 1)
rgroup.long $1++0x3F
line.long 0x00 "CRCA_VERSION_$2,CRCA Version ID Alias $2 Register"
hexmask.long.byte 0x00 24.--31. 0x01 "CRCA_VID,CRC hardware accelerator version ID"
hexmask.long.byte 0x00 16.--23. 0x01 "CRCA_REV,CRC hardware accelerator revision number"
hexmask.long.byte 0x00 8.--15. 0x01 "CRCA_MISC,CRC hardware accelerator miscellaneous information"
hexmask.long.byte 0x00 0.--7. 1. "CRCA_NUM,Number of CRC hardware accelerators instantiated"
line.long 0x04 "AFHA_VERSION_$2,AFHA Version ID Alias $2 Register"
hexmask.long.byte 0x04 24.--31. 0x01 "AFHA_VID,Alleged RC4 hardware accelerator version ID"
hexmask.long.byte 0x04 16.--23. 0x01 "AFHA_REV,Alleged RC4 hardware accelerator revision number"
hexmask.long.byte 0x04 8.--15. 0x01 "AFHA_MISC,Alleged RC4 hardware accelerator miscellaneous information"
hexmask.long.byte 0x04 0.--7. 1. "AFHA_NUM,Number of alleged RC4 hardware accelerators instantiated"
line.long 0x08 "KFHA_VERSION_$2,KFHA Version ID Alias $2 Register"
hexmask.long.byte 0x08 24.--31. 0x01 "KFHA_VID,Kasumi f8/f9 hardware accelerator version ID"
hexmask.long.byte 0x08 16.--23. 0x01 "KFHA_REV,Kasumi f8/f9 hardware accelerator revision number"
hexmask.long.byte 0x08 8.--15. 0x01 "KFHA_MISC,Kasumi f8/f9 hardware accelerator miscellaneous information"
hexmask.long.byte 0x08 0.--7. 1. "KFHA_NUM,Number of Kasumi f8/f9 hardware accelerators instantiated"
line.long 0x0C "PKHA_VERSION_$2,PKHA Version ID Alias $2 Register"
hexmask.long.byte 0x0C 24.--31. 0x01 "PKHA_VID,PKHA hardware accelerator version ID"
hexmask.long.byte 0x0C 16.--23. 0x01 "PKHA_REV,PKHA hardware accelerator revision number"
hexmask.long.byte 0x0C 8.--15. 0x01 "PKHA_MISC,PKHA hardware accelerator miscellaneous information"
hexmask.long.byte 0x0C 0.--7. 1. "PKHA_NUM,Number of PKHA hardware accelerators instantiated"
line.long 0x10 "AESA_VERSION_$2,AESA Version ID Alias $2 Register"
hexmask.long.byte 0x10 24.--31. 0x01 "AESA_VID,AES hardware accelerator version ID"
hexmask.long.byte 0x10 16.--23. 0x01 "AESA_REV,AES hardware accelerator revision number"
hexmask.long.byte 0x10 8.--15. 0x01 "AESA_MISC,AES hardware accelerator miscellaneous information"
hexmask.long.byte 0x10 0.--7. 1. "AESA_NUM,Number of AES hardware accelerators instantiated"
line.long 0x14 "MDHA_VERSION_$2,MDHA Version ID Alias $2 Register"
hexmask.long.byte 0x14 24.--31. 0x01 "MDHA_VID,MDHA hardware accelerator version ID"
hexmask.long.byte 0x14 16.--23. 0x01 "MDHA_REV,MDHA hardware accelerator revision number"
hexmask.long.byte 0x14 8.--15. 0x01 "MDHA_MISC,MDHA hardware accelerator miscellaneous information"
hexmask.long.byte 0x14 0.--7. 1. "MDHA_NUM,Number of MDHA hardware accelerators instantiated"
line.long 0x18 "DESA_VERSION_$2,DESA Version ID Alias $2 Register"
hexmask.long.byte 0x18 24.--31. 0x01 "DESA_VID,DESA hardware accelerator version ID"
hexmask.long.byte 0x18 16.--23. 0x01 "DESA_REV,DESA hardware accelerator revision number"
hexmask.long.byte 0x18 8.--15. 0x01 "DESA_MISC,DESA hardware accelerator miscellaneous information"
hexmask.long.byte 0x18 0.--7. 1. "DESA_NUM,Number of DESA hardware accelerators instantiated"
line.long 0x1C "SNW8A_VERSION_$2,SNW8A Version ID Alias $2 Register"
hexmask.long.byte 0x1C 24.--31. 0x01 "SNW8_VID,SNW8 hardware accelerator version ID"
hexmask.long.byte 0x1C 16.--23. 0x01 "SNW8_REV,SNW8 hardware accelerator revision number"
hexmask.long.byte 0x1C 8.--15. 0x01 "SNW8_MISC,SNW8 hardware accelerator miscellaneous information"
hexmask.long.byte 0x1C 0.--7. 1. "SNW8_NUM,Number of SNW8 hardware accelerators instantiated"
line.long 0x20 "SNW9A_VERSION_$2,SNW9A Version ID Alias $2 Register"
hexmask.long.byte 0x20 24.--31. 0x01 "SNW9_VID,SNW9 hardware accelerator version ID"
hexmask.long.byte 0x20 16.--23. 0x01 "SNW9_REV,SNW9 hardware accelerator revision number"
hexmask.long.byte 0x20 8.--15. 0x01 "SNW9_MISC,SNW9 hardware accelerator miscellaneous information"
hexmask.long.byte 0x20 0.--7. 1. "SNW9_NUM,Number of SNW9 hardware accelerators instantiated"
line.long 0x24 "ZUCE_VERSION_$2,ZUCE Version ID Alias $2 Register"
hexmask.long.byte 0x24 24.--31. 0x01 "ZUCE_VID,ZUCE hardware accelerator version ID"
hexmask.long.byte 0x24 16.--23. 0x01 "ZUCE_REV,ZUCE hardware accelerator revision number"
hexmask.long.byte 0x24 8.--15. 0x01 "ZUCE_MISC,ZUCE hardware accelerator miscellaneous information"
hexmask.long.byte 0x24 0.--7. 1. "ZUCE_NUM,Number of ZUCE hardware accelerators instantiated"
line.long 0x28 "ZUCA_VERSION_$2,ZUCA Version ID Alias $2 Register"
hexmask.long.byte 0x28 24.--31. 0x01 "ZUCA_VID,ZUCA hardware accelerator version ID"
hexmask.long.byte 0x28 16.--23. 0x01 "ZUCA_REV,ZUCA hardware accelerator revision number"
hexmask.long.byte 0x28 8.--15. 0x01 "ZUCA_MISC,ZUCA hardware accelerator miscellaneous information"
hexmask.long.byte 0x28 0.--7. 1. "ZUCA_NUM,Number of ZUCA hardware accelerators instantiated"
line.long 0x2C "CCHA_VERSION_$2,CCHA Version ID Alias $2 Register"
hexmask.long.byte 0x2C 24.--31. 0x01 "CCHA_VID,CCHA hardware accelerator version ID"
hexmask.long.byte 0x2C 16.--23. 0x01 "CCHA_REV,CCHA hardware accelerator revision number"
hexmask.long.byte 0x2C 8.--15. 0x01 "CCHA_MISC,CCHA hardware accelerator miscellaneous information"
hexmask.long.byte 0x2C 0.--7. 1. "CCHA_NUM,Number of CCHA hardware accelerators instantiated"
line.long 0x30 "PTHA_VERSION_$2,PTHA Version ID Alias $2 Register"
hexmask.long.byte 0x30 24.--31. 0x01 "PTHA_VID,PTHA hardware accelerator version ID"
hexmask.long.byte 0x30 16.--23. 0x01 "PTHA_REV,PTHA hardware accelerator revision number"
hexmask.long.byte 0x30 8.--15. 0x01 "PTHA_MISC,PTHA hardware accelerator miscellaneous information"
hexmask.long.byte 0x30 0.--7. 1. "PTHA_NUM,Number of PTHA hardware accelerators instantiated"
line.long 0x34 "RNG_VERSION_$2,RNG Version ID Alias $2 Register"
hexmask.long.byte 0x34 24.--31. 0x01 "RNG_VID,RNG hardware accelerator version ID"
hexmask.long.byte 0x34 16.--23. 0x01 "RNG_REV,RNG hardware accelerator revision number"
hexmask.long.byte 0x34 8.--15. 0x01 "RNG_MISC,RNG hardware accelerator miscellaneous information"
hexmask.long.byte 0x34 0.--7. 1. "RNG_NUM,Number of RNG hardware accelerators instantiated"
line.long 0x38 "TRNG_VERSION_$2,TRNG Version ID Alias $2 Register"
hexmask.long.byte 0x38 24.--31. 0x01 "TRNG_VID,TRNG hardware accelerator version ID"
hexmask.long.byte 0x38 16.--23. 0x01 "TRNG_REV,TRNG hardware accelerator revision number"
hexmask.long.byte 0x38 8.--15. 0x01 "TRNG_MISC,TRNG hardware accelerator miscellaneous information"
hexmask.long.byte 0x38 0.--7. 1. "TRNG_NUM,Number of TRNG hardware accelerators instantiated"
line.long 0x3C "AAHA_VERSION_$2,Alternate AES Hardware Accelerator Version ID Alias $2 Register"
hexmask.long.byte 0x3C 24.--31. 0x01 "AAHA_VID,Alternate AES hardware accelerator version ID"
hexmask.long.byte 0x3C 16.--23. 0x01 "AAHA_REV,Alternate AES hardware accelerator revision number"
hexmask.long.byte 0x3C 8.--15. 0x01 "AAHA_MISC,Alternate AES hardware accelerator miscellaneous information"
hexmask.long.byte 0x3C 0.--7. 1. "AAHA_NUM,Number of alternate AES hardware accelerators instantiated"
group.long ($1+0x68)++0x17
line.long 0x00 "SR_VERSION_$2,SR Version ID Alias $2 Register"
hexmask.long.byte 0x00 24.--31. 0x01 "SR_VID,SR version ID"
hexmask.long.byte 0x00 16.--23. 0x01 "SR_REV,SR revision number"
hexmask.long.byte 0x00 8.--15. 0x01 "SR_MISC,SR miscellaneous information"
hexmask.long.byte 0x00 0.--7. 1. "SR_NUM,Number of SR instantiated"
line.long 0x04 "DMA_VERSION_$2,DMA Version ID Alias $2 Register"
hexmask.long.byte 0x04 24.--31. 0x01 "DMA_VID,DMA version ID"
hexmask.long.byte 0x04 16.--23. 0x01 "DMA_REV,DMA revision number"
hexmask.long.byte 0x04 8.--15. 0x01 "DMA_MISC,DMA miscellaneous information"
hexmask.long.byte 0x04 0.--7. 1. "DMA_NUM,Number of DMAs instantiated"
line.long 0x08 "AI_VERSION_$2,AI Version ID Alias $2 Register"
hexmask.long.byte 0x08 24.--31. 0x01 "AI_VID,AI version ID"
hexmask.long.byte 0x08 16.--23. 0x01 "AI_REV,AI revision number"
hexmask.long.byte 0x08 8.--15. 0x01 "AI_MISC,AI miscellaneous information"
hexmask.long.byte 0x08 0.--7. 1. "AI_NUM,Number of AIOP interfaces instantiated"
line.long 0x0C "QI_VERSION_$2,QI Version ID Alias $2 Register"
hexmask.long.byte 0x0C 24.--31. 0x01 "QI_VID,QI version ID"
hexmask.long.byte 0x0C 16.--23. 0x01 "QI_REV,QI revision number"
hexmask.long.byte 0x0C 8.--15. 0x01 "QI_MISC,QI miscellaneous information"
hexmask.long.byte 0x0C 0.--7. 1. "QI_NUM,Number of QIs instantiated"
line.long 0x10 "JR_VERSION_$2,JR Version ID Alias $2 Register"
hexmask.long.byte 0x10 24.--31. 0x01 "JR_VID,JR version ID"
hexmask.long.byte 0x10 16.--23. 0x01 "JR_REV,JR revision number"
hexmask.long.byte 0x10 8.--15. 0x01 "JR_MISC,JR miscellaneous information"
hexmask.long.byte 0x10 0.--7. 1. "JR_NUM,Number of JRs instantiated"
line.long 0x14 "DECO_VERSION_$2,DECO Version ID Alias $2 Register"
hexmask.long.byte 0x14 24.--31. 0x01 "DECO_VID,DECO version ID"
hexmask.long.byte 0x14 16.--23. 0x01 "DECO_REV,DECO revision number"
hexmask.long.byte 0x14 8.--15. 0x01 "DECO_MISC,DECO miscellaneous information"
hexmask.long.byte 0x14 0.--7. 1. "DECO_NUM,Number of DECOs instantiated"
repeat.end
tree.end
tree "Performance Counter Registers"
repeat 8. (list 0xF00 0x10F00 0x20F00 0x30F00 0x40F00 0x60F00 0x80F00 0x90F00)(increment 0 1)
group.quad $1++0x37
line.quad 0x00 "PC_REQ_DEQ_$2,Performance Counter Number Of Requests Dequeued Alias $2 Register"
hexmask.quad 0x00 0.--47. 1. "PC_REQ_DEQ,Performance counter requests dequeued"
line.quad 0x08 "PC_OB_ENC_REQ_$2,Performance Counter Number Of Outbound Encrypt Requests Alias $2 Register"
hexmask.quad 0x08 0.--47. 1. "PC_OB_ENC_REQ,Performance counter outbound encryption requests"
line.quad 0x10 "PC_IB_DEC_REQ_$2,Performance Counter Number Of Inbound Decrypt Requests Alias $2 Register"
hexmask.quad 0x10 0.--47. 1. "PC_IB_DEC_REQ,Performance counter inbound decryptions requested"
line.quad 0x18 "PC_OB_ENCRYPT_$2,Performance Counter Number Of Outbound Bytes Encrypted Alias $2 Register"
hexmask.quad 0x18 0.--47. 1. "PC_OB_ENCRYPT,Performance counter outbound bytes encrypted"
line.quad 0x20 "PC_OB_PROTECT_$2,Performance Counter Number Of Outbound Bytes Protected Alias $2 Register"
hexmask.quad 0x20 0.--47. 1. "PC_OB_PROTECT,Performance counter outbound bytes encrypted"
line.quad 0x28 "PC_IB_DECRYPT_$2,Performance Counter Number Of Inbound Bytes Decrypted Alias $2 Register"
hexmask.quad 0x28 0.--47. 1. "PC_IB_DECRYPT,Performance counter inbound bytes decrypted"
line.quad 0x30 "PC_IB_VALIDATED_$2,Performance Counter Number Of Inbound Bytes Validated Alias $2 Register"
hexmask.quad 0x30 0.--47. 1. "PC_IB_VALIDATED,Performance counter inbound bytes validated"
repeat.end
tree.end
tree "Performance Counter Registers"
repeat 8. (list 0xFA8 0x10FA8 0x20FA8 0x30FA8 0x40FA8 0x60FA8 0x80FA8 0x90FA8)(increment 0 1)
rgroup.long $1++0x07
line.long 0x00 "CTPR_MS_$2,Compile Time Parameters Alias $2 Register Most Significant Half"
bitfld.long 0x00 28.--31. "AXI_PIPE_DEPTH,AXI pipeline depth" "Maximum,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 27. "AXI_LIODN,LIODN logic included" "Not implemented,Implemented"
bitfld.long 0x00 26. "AXI_PRI,AXI master priority implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 25. "QI,Queue manager interface (QI)" "Not implemented,Implemented"
bitfld.long 0x00 24. "ACC_CTL,ICID-based access control" "Not implemented,Implemented"
bitfld.long 0x00 23. "C1C2,Separate C1 and C2 registers" "Shared,Separated"
newline
bitfld.long 0x00 21. "PC,Performance counter registers implemented" "Not implemented,Implemented"
bitfld.long 0x00 20. "DECO_WD,DECO watchdog counter implemented" "Not implemented,Implemented"
bitfld.long 0x00 19. "PM_EVT_BUS,Performance monitor event bus implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 18. "SG8,Eight scatter-gather tables implemented" "1 table,8 tables"
bitfld.long 0x00 17. "MCFG_PS,Pointer size field implemented" "Not implemented,Implemented"
bitfld.long 0x00 16. "MCFG_BURST,Support for large AXI bursts" "Not implemented,Implemented"
newline
bitfld.long 0x00 14. "IP_CLK,IP bus slave clock to SEC's AXI bus clock ratio" "1:1,1:2"
bitfld.long 0x00 13. "DPAA2,DPAA2 architecture supported" "Not supported,Supported"
bitfld.long 0x00 11. "AI_INCL,AIOP interface implemented" "Not implemented,Implemented"
newline
bitfld.long 0x00 8.--10. "RNG_I,RNG Instantiations" "0,1,2,3,4,5,6,7"
bitfld.long 0x00 4. "REG_PG_SIZE,SEC register page size" "4Kbyte,64Kbyte"
bitfld.long 0x00 1. "VIRT_EN_POR_VALUE,Job ring virtualization POR state" "Disabled,Enabled"
newline
bitfld.long 0x00 0. "VIRT_EN_INCL,Job ring virtualization programmable" "Not included,Included"
line.long 0x04 "CTPR_LS_$2,Compile Time Parameters Alias $2 Register Least Significant Half"
bitfld.long 0x04 14. "DKP,Derived key protocol" "Not implemented,Implemented"
bitfld.long 0x04 13. "MAN_PROT,Manufacturing protection protocol" "Not implemented,Implemented"
bitfld.long 0x04 12. "DBL_CRC,Double crC protocol" "Not implemented,Implemented"
newline
bitfld.long 0x04 11. "P3G_LTE,3GPP/LTE protocol" "Not implemented,Implemented"
bitfld.long 0x04 10. "RSA,RSA protocol" "Not implemented,Implemented"
bitfld.long 0x04 9. "MACSEC,MACSEC protocol" "Not implemented,Implemented"
newline
bitfld.long 0x04 8. "TLS_PRF,TLS PRF protocol" "Not implemented,Implemented"
bitfld.long 0x04 7. "SSL_TLS,SSL/TLS protocol" "Not implemented,Implemented"
bitfld.long 0x04 6. "IKE,IKE protocols" "Not implemented,Implemented"
newline
bitfld.long 0x04 5. "IPSEC,IPSEC protocols" "Not implemented,Implemented"
bitfld.long 0x04 4. "SRTP,SRTP protocol" "Not implemented,Implemented"
bitfld.long 0x04 3. "WIMAX,WiMax protocol" "Not implemented,Implemented"
newline
bitfld.long 0x04 2. "WIFI,WiFi protocol" "Not implemented,Implemented"
bitfld.long 0x04 1. "BLOB,Blob protocol" "Not implemented,Implemented"
bitfld.long 0x04 0. "KG_DS,PK generation and digital signature protocols" "Not implemented,Implemented"
repeat.end
tree.end
tree "Fault Address Registers"
repeat 8. (list 0xFC0 0x10FC0 0x20FC0 0x30FC0 0x40FC0 0x60FC0 0x80FC0 0x90FC0)(increment 0 1)
hgroup.quad $1++0x07
hide.quad 0x00 "FAR_$2,Fault Address Alias $2 Register"
in
newline
hgroup.long ($1+0x08)++0x03
hide.long 0x00 "FAICID_$2,Fault Address ICID Alias $2 Register"
in
newline
hgroup.long ($1+0x0C)++0x03
hide.long 0x00 "FADR_$2,Fault Address Detail Alias $2 Register"
in
newline
repeat.end
tree.end
tree "SEC Status Registers"
repeat 8. (list 0xFD4 0x10FD4 0x20FD4 0x30FD4 0x40FD4 0x60FD4 0x80FD4 0x90FD4)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "SSTA_$2,SEC Status Alias $2 Register"
bitfld.long 0x00 10. "PLEND,Platform endianness" "Little,Big"
bitfld.long 0x00 8.--9. "MOO,Mode of operation" "Non secure,Secure,Trusted,Failed"
bitfld.long 0x00 2. "TRNG_IDLE,TRNG idle" "Not idle,Idle"
bitfld.long 0x00 1. "IDLE,SEC is idle" "Not idle,Idle"
bitfld.long 0x00 0. "BSY,SEC busy" "Not busy,Busy"
repeat.end
tree.end
tree "RTIC Version ID Registers"
repeat 8. (list 0xFE0 0x10FE0 0x20FE0 0x30FE0 0x40FE0 0x60FE0 0x80FE0 0x90FE0)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "RVID_$2,RTIC Version ID Alias $2 Register"
bitfld.long 0x00 27. "MD,Memory block D available" "Not available,Available"
bitfld.long 0x00 26. "MC,Memory block C available" "Not available,Available"
bitfld.long 0x00 25. "MB,Memory block B available" "Not available,Available"
newline
bitfld.long 0x00 24. "MA,Memory block A available" "Not available,Available"
bitfld.long 0x00 19. "SHA_512,SHA-512" "Not usable,Usable"
bitfld.long 0x00 17. "SHA_256,SHA-256" "Not usable,Usable"
newline
hexmask.long.byte 0x00 8.--15. 1. "RMJV,RTIC major version"
hexmask.long.byte 0x00 0.--7. 1. "RMNV,RTIC minor version"
repeat.end
tree.end
tree "CHA Cluster Block Version ID Registers"
repeat 8. (list 0xFE4 0x10FE4 0x20FE4 0x30FE4 0x40FE4 0x60FE4 0x80FE4 0x90FE4)(increment 0 1)
group.long $1++0x03
line.long 0x00 "CCBVID$2,CHA Cluster Block Version ID Register"
hexmask.long.byte 0x00 24.--31. 1. "SEC_ERA,SEC era"
hexmask.long.byte 0x00 8.--15. 1. "AMJV,Accelerator major revision number"
hexmask.long.byte 0x00 0.--7. 1. "AMNV,Accelerator minor revision number"
repeat.end
tree.end
tree "Job Ring 0"
group.quad 0x10000++0x07
line.quad 0x00 "IRBAR_JR0,Input Ring Base Address Register For Job Ring 0"
hexmask.quad 0x00 0.--48. 0x01 "IRBA,Input ring base address"
group.long (0x10000+0x0C)++0x03
line.long 0x00 "IRSR_JR0,Input Ring Size Register For Job Ring 0"
hexmask.long.word 0x00 0.--9. 1. "IRS,Input ring size"
group.long (0x10000+0x14)++0x03
line.long 0x00 "IRSAR_JR0,Input Ring Slots Available Register For Job Ring 0"
hexmask.long.word 0x00 0.--9. 1. "IRSA,Input ring slots available"
group.long (0x10000+0x1C)++0x03
line.long 0x00 "IRJAR_JR0,Input Ring Jobs Added Register For Job Ring 0"
hexmask.long.word 0x00 0.--9. 1. "IRJA,Input ring jobs added"
group.quad (0x10000+0x20)++0x07
line.quad 0x00 "ORBAR_JR0,Output Ring Base Address Register For Job Ring 0"
hexmask.quad 0x00 0.--48. 0x01 "ORBA,Output ring base address"
group.long (0x10000+0x2C)++0x03
line.long 0x00 "ORSR_JR0,Output Ring Size Register For Job Ring 0"
hexmask.long.word 0x00 0.--9. 1. "ORS,Output ring size"
group.long (0x10000+0x34)++0x03
line.long 0x00 "ORJRR_JR0,Output Ring Jobs Removed Register For Job Ring 0"
hexmask.long.word 0x00 0.--9. 1. "ORJR,Output ring jobs removed"
group.long (0x10000+0x3C)++0x03
line.long 0x00 "ORSFR_JR0,Output Ring Slots Full Register For Job Ring 0"
hexmask.long.word 0x00 0.--9. 1. "ORSF,Output ring slots full"
if (((per.l(ad:0x8000000+0x10000+0x44))&0xF0000000)==0x00)
rgroup.long (0x10000+0x44)++0x03
line.long 0x00 "JRSTAR_JR0,Job Ring Output Status Register For Job Ring 0"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
elif (((per.l(ad:0x8000000+0x10000+0x44))&0xF0000000)==0x20000000)
rgroup.long (0x10000+0x44)++0x03
line.long 0x00 "JRSTAR_JR02,Job Ring Output Status Register For Job Ring 0"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to an error within the descriptor (number of words)"
bitfld.long 0x00 4.--7. "CHAID,Algorithm that generated the error" "CCB,AESA,DESA,,MDHA,RNG,SNOWf8,KFHA f8/9,PKHA,CRCA,SNOWf9,ZUCE,ZUCA,?..."
newline
bitfld.long 0x00 0.--3. "ERRID,Descriptor error ID" "None,Mode,Data size,Key size/Instantiated,Not instantiated/A size,Instantiated/B size,Prediction resistance/Data out of sequence /ECC F2M,Prediction resist./Divide by 0,Modulus even,Key parity/Secure key generation,ICV check failed,Hardware,CCM AAD size/Continuous check/Invalid key,Class 1 or 2 CHA is not reset,Invalid CHA combination,Invalid CHA"
elif (((per.l(ad:0x8000000+0x10000+0x44))&0xF0000000)==0x30000000)
rgroup.long (0x10000+0x44)++0x03
line.long 0x00 "JRSTAR_JR03,Job Ring Output Status Register For Job Ring 0"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to JUMP HALT command within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "LOCAL_OFFSET,User defined value"
elif (((per.l(ad:0x8000000+0x10000+0x44))&0xF0000000)==0x40000000)
rgroup.long (0x10000+0x44)++0x03
line.long 0x00 "JRSTAR_JR04,Job Ring Output Status Register For Job Ring 0"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to an error within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "ERROR,Error Code"
elif (((per.l(ad:0x8000000+0x10000+0x44))&0xF0000000)==0x60000000)
rgroup.long (0x10000+0x44)++0x03
line.long 0x00 "JRSTAR_JR06,Job Ring Output Status Register For Job Ring 0"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 8.--11. "NADDR,Number of descriptor addresses requested" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--7. "ERROR,Error Code" "No error,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Descriptor address,Descriptor,?..."
elif (((per.l(ad:0x8000000+0x10000+0x44))&0xF0000000)==0x70000000)
rgroup.long (0x10000+0x44)++0x03
line.long 0x00 "JRSTAR_JR07,Job Ring Output Status Register For Job Ring 0"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to JUMP HALT command within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "COND,PKHA/Math condition codes field from JUMP HALT command"
endif
group.long (0x10000+0x4C)++0x0B
line.long 0x00 "JRINTR_JR0,Job Ring Interrupt Status Register For Job Ring 0"
hexmask.long.word 0x00 16.--29. 1. "ERR_ORWI,Output ring write index with error"
rbitfld.long 0x00 8.--12. "ERR_TYPE,Error type" ",Writing to OR,,Bad IR,Bad OR,Invalid write to IR,Invalid write to OR,Job ring reset,ORJRR > ORSFR,IRJAR > IRSAR,Writing ORSF > ORS,Writing IRSA > IRS,Writing ORWI > ORS in bytes,Writing IRRI > IRS in bytes,Writing IRSA when ring is active,Writing IRRI when ring is active,Writing ORSF when ring is active,Writing ORWI when ring is active,?..."
newline
eventfld.long 0x00 5. "EXIT_FAIL,Exit SecMon fail state" "Not exited,Exited"
eventfld.long 0x00 4. "ENTER_FAIL,Enter SecMon fail state" "Not entered,Entered"
newline
eventfld.long 0x00 3. "HALT[1],Halt the job ring 1" ",Requested"
eventfld.long 0x00 2. "[0],Halt the job ring 0" ",Flushed-Halted/Clear"
newline
eventfld.long 0x00 1. "JRE,Job ring error" "No error,Error"
eventfld.long 0x00 0. "JRI,Job ring interrupt" "No interrupt,Interrupt"
line.long 0x04 "JRCFGR_JR0_MS,Job Ring Configuration Register For Job Ring 0 Most Significant Half"
bitfld.long 0x04 30. "INCL_SEQ_OUT,Include sequence out length" "Not included,Included"
bitfld.long 0x04 29. "FAIL_MODE,Fail mode control" "Halt,Continue"
line.long 0x08 "JRCFGR_JR0_LS,Job Ring Configuration Register For Job Ring 0 Least Significant Half"
hexmask.long.word 0x08 16.--31. 0x01 "ICTT,Interrupt coalescing timer threshold"
hexmask.long.byte 0x08 8.--15. 0x01 "ICDCT,Interrupt coalescing descriptor count threshold"
newline
bitfld.long 0x08 1. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x08 0. "IMSK,Interrupt mask" "Not masked,Masked"
group.long (0x10000+0x5C)++0x03
line.long 0x00 "IRRIR_JR0,Input Ring Read Index Register For Job Ring 0"
hexmask.long.word 0x00 0.--12. 1. "IRRI,Input ring read index"
group.long (0x10000+0x64)++0x03
line.long 0x00 "ORWIR_JR0,Output Ring Write Index Register For Job Ring 0"
hexmask.long.word 0x00 0.--13. 1. "ORWI,Output ring write index"
wgroup.long (0x10000+0x6C)++0x03
line.long 0x00 "JRCR_JR0,Job Ring Command Register For Job Ring 0"
bitfld.long 0x00 1. "PARK,Park" "No effect,Park"
bitfld.long 0x00 0. "RESET,Reset" "No effect,Reset"
hgroup.long (0x10000+0x704)++0x03
hide.long 0x00 "JR0AAV,Job Ring 0 Address-Array Valid Register"
in
hgroup.quad (0x10000+0x800)++0x07
hide.quad 0x00 "JR0AAA0,Job Ring 0 Address-Array Address 0 Register"
in
hgroup.quad (0x10000+0x808)++0x07
hide.quad 0x00 "JR0AAA0,Job Ring 0 Address-Array Address 1 Register"
in
hgroup.quad (0x10000+0x810)++0x07
hide.quad 0x00 "JR0AAA2,Job Ring 0 Address-Array Address 2 Register"
in
hgroup.quad (0x10000+0x818)++0x07
hide.quad 0x00 "JR0AAA3,Job Ring 0 Address-Array Address 3 Register"
in
rgroup.long (0x10000+0xE00)++0x03
line.long 0x00 "REIR0JR0,Recoverable Error Interrupt Record 0 For Job Ring 0"
bitfld.long 0x00 31. "MISS,Miss" "Not occurred,Occurred"
bitfld.long 0x00 24.--25. "TYPE,Type of the recoverable error" ",Memory access,?..."
rgroup.quad (0x10000+0xE08)++0x07
line.quad 0x00 "REIR2JR0,Recoverable Error Interrupt Record 2 For Job Ring 0"
hexmask.quad 0x00 0.--48. 0x01 "ADDR,Address associated with the recoverable JR error"
rgroup.long (0x10000+0xE10)++0x07
line.long 0x00 "REIR4JR0,Recoverable Error Interrupt Record 4 For Job Ring 0"
bitfld.long 0x00 30.--31. "MIX,Memory interface index" "0,1,2,3"
bitfld.long 0x00 28.--29. "ERR,AXI error response" "0,1,2,3"
newline
bitfld.long 0x00 25. "BMT,Bypass memory translation transaction attribute" "0,1"
bitfld.long 0x00 24. "PL,Privilege level transaction attribute" "0,1"
newline
bitfld.long 0x00 23. "RWB,Read or write" "Read,Write"
bitfld.long 0x00 20.--22. "AXPROT,AXI protection transaction attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--19. "AXCACHE,AXI cache control transaction attribute" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 0.--6. 1. "ICID,Holds the ICID associated with the recoverable error"
line.long 0x04 "REIR5JR0,Recoverable Error Interrupt Record 5 For Job Ring 0"
bitfld.long 0x04 24. "SAFE,Indicates whether the AXI transaction was a 'safe' transaction" "Not safe,Safe"
bitfld.long 0x04 16.--19. "BID,Block identifier of the source of the AXI transaction" "General,Job ring 0,Job ring 1,Job ring 2,Job ring 3,,Real-time integrity check,,DECO 0/CHA CCB 0,DECO 1/CHA CCB 1,?..."
tree.end
tree "Job Ring 1"
group.quad 0x20000++0x07
line.quad 0x00 "IRBAR_JR1,Input Ring Base Address Register For Job Ring 1"
hexmask.quad 0x00 0.--48. 0x01 "IRBA,Input ring base address"
group.long (0x20000+0x0C)++0x03
line.long 0x00 "IRSR_JR1,Input Ring Size Register For Job Ring 1"
hexmask.long.word 0x00 0.--9. 1. "IRS,Input ring size"
group.long (0x20000+0x14)++0x03
line.long 0x00 "IRSAR_JR1,Input Ring Slots Available Register For Job Ring 1"
hexmask.long.word 0x00 0.--9. 1. "IRSA,Input ring slots available"
group.long (0x20000+0x1C)++0x03
line.long 0x00 "IRJAR_JR1,Input Ring Jobs Added Register For Job Ring 1"
hexmask.long.word 0x00 0.--9. 1. "IRJA,Input ring jobs added"
group.quad (0x20000+0x20)++0x07
line.quad 0x00 "ORBAR_JR1,Output Ring Base Address Register For Job Ring 1"
hexmask.quad 0x00 0.--48. 0x01 "ORBA,Output ring base address"
group.long (0x20000+0x2C)++0x03
line.long 0x00 "ORSR_JR1,Output Ring Size Register For Job Ring 1"
hexmask.long.word 0x00 0.--9. 1. "ORS,Output ring size"
group.long (0x20000+0x34)++0x03
line.long 0x00 "ORJRR_JR1,Output Ring Jobs Removed Register For Job Ring 1"
hexmask.long.word 0x00 0.--9. 1. "ORJR,Output ring jobs removed"
group.long (0x20000+0x3C)++0x03
line.long 0x00 "ORSFR_JR1,Output Ring Slots Full Register For Job Ring 1"
hexmask.long.word 0x00 0.--9. 1. "ORSF,Output ring slots full"
if (((per.l(ad:0x8000000+0x20000+0x44))&0xF0000000)==0x00)
rgroup.long (0x20000+0x44)++0x03
line.long 0x00 "JRSTAR_JR1,Job Ring Output Status Register For Job Ring 1"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
elif (((per.l(ad:0x8000000+0x20000+0x44))&0xF0000000)==0x20000000)
rgroup.long (0x20000+0x44)++0x03
line.long 0x00 "JRSTAR_JR12,Job Ring Output Status Register For Job Ring 1"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to an error within the descriptor (number of words)"
bitfld.long 0x00 4.--7. "CHAID,Algorithm that generated the error" "CCB,AESA,DESA,,MDHA,RNG,SNOWf8,KFHA f8/9,PKHA,CRCA,SNOWf9,ZUCE,ZUCA,?..."
newline
bitfld.long 0x00 0.--3. "ERRID,Descriptor error ID" "None,Mode,Data size,Key size/Instantiated,Not instantiated/A size,Instantiated/B size,Prediction resistance/Data out of sequence /ECC F2M,Prediction resist./Divide by 0,Modulus even,Key parity/Secure key generation,ICV check failed,Hardware,CCM AAD size/Continuous check/Invalid key,Class 1 or 2 CHA is not reset,Invalid CHA combination,Invalid CHA"
elif (((per.l(ad:0x8000000+0x20000+0x44))&0xF0000000)==0x30000000)
rgroup.long (0x20000+0x44)++0x03
line.long 0x00 "JRSTAR_JR13,Job Ring Output Status Register For Job Ring 1"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to JUMP HALT command within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "LOCAL_OFFSET,User defined value"
elif (((per.l(ad:0x8000000+0x20000+0x44))&0xF0000000)==0x40000000)
rgroup.long (0x20000+0x44)++0x03
line.long 0x00 "JRSTAR_JR14,Job Ring Output Status Register For Job Ring 1"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to an error within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "ERROR,Error Code"
elif (((per.l(ad:0x8000000+0x20000+0x44))&0xF0000000)==0x60000000)
rgroup.long (0x20000+0x44)++0x03
line.long 0x00 "JRSTAR_JR16,Job Ring Output Status Register For Job Ring 1"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 8.--11. "NADDR,Number of descriptor addresses requested" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--7. "ERROR,Error Code" "No error,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Descriptor address,Descriptor,?..."
elif (((per.l(ad:0x8000000+0x20000+0x44))&0xF0000000)==0x70000000)
rgroup.long (0x20000+0x44)++0x03
line.long 0x00 "JRSTAR_JR17,Job Ring Output Status Register For Job Ring 1"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to JUMP HALT command within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "COND,PKHA/Math condition codes field from JUMP HALT command"
endif
group.long (0x20000+0x4C)++0x0B
line.long 0x00 "JRINTR_JR1,Job Ring Interrupt Status Register For Job Ring 1"
hexmask.long.word 0x00 16.--29. 1. "ERR_ORWI,Output ring write index with error"
rbitfld.long 0x00 8.--12. "ERR_TYPE,Error type" ",Writing to OR,,Bad IR,Bad OR,Invalid write to IR,Invalid write to OR,Job ring reset,ORJRR > ORSFR,IRJAR > IRSAR,Writing ORSF > ORS,Writing IRSA > IRS,Writing ORWI > ORS in bytes,Writing IRRI > IRS in bytes,Writing IRSA when ring is active,Writing IRRI when ring is active,Writing ORSF when ring is active,Writing ORWI when ring is active,?..."
newline
eventfld.long 0x00 5. "EXIT_FAIL,Exit SecMon fail state" "Not exited,Exited"
eventfld.long 0x00 4. "ENTER_FAIL,Enter SecMon fail state" "Not entered,Entered"
newline
eventfld.long 0x00 3. "HALT[1],Halt the job ring 1" ",Requested"
eventfld.long 0x00 2. "[0],Halt the job ring 0" ",Flushed-Halted/Clear"
newline
eventfld.long 0x00 1. "JRE,Job ring error" "No error,Error"
eventfld.long 0x00 0. "JRI,Job ring interrupt" "No interrupt,Interrupt"
line.long 0x04 "JRCFGR_JR1_MS,Job Ring Configuration Register For Job Ring 1 Most Significant Half"
bitfld.long 0x04 30. "INCL_SEQ_OUT,Include sequence out length" "Not included,Included"
bitfld.long 0x04 29. "FAIL_MODE,Fail mode control" "Halt,Continue"
line.long 0x08 "JRCFGR_JR1_LS,Job Ring Configuration Register For Job Ring 1 Least Significant Half"
hexmask.long.word 0x08 16.--31. 0x01 "ICTT,Interrupt coalescing timer threshold"
hexmask.long.byte 0x08 8.--15. 0x01 "ICDCT,Interrupt coalescing descriptor count threshold"
newline
bitfld.long 0x08 1. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x08 0. "IMSK,Interrupt mask" "Not masked,Masked"
group.long (0x20000+0x5C)++0x03
line.long 0x00 "IRRIR_JR1,Input Ring Read Index Register For Job Ring 1"
hexmask.long.word 0x00 0.--12. 1. "IRRI,Input ring read index"
group.long (0x20000+0x64)++0x03
line.long 0x00 "ORWIR_JR1,Output Ring Write Index Register For Job Ring 1"
hexmask.long.word 0x00 0.--13. 1. "ORWI,Output ring write index"
wgroup.long (0x20000+0x6C)++0x03
line.long 0x00 "JRCR_JR1,Job Ring Command Register For Job Ring 1"
bitfld.long 0x00 1. "PARK,Park" "No effect,Park"
bitfld.long 0x00 0. "RESET,Reset" "No effect,Reset"
hgroup.long (0x20000+0x704)++0x03
hide.long 0x00 "JR1AAV,Job Ring 1 Address-Array Valid Register"
in
hgroup.quad (0x20000+0x800)++0x07
hide.quad 0x00 "JR1AAA0,Job Ring 1 Address-Array Address 0 Register"
in
hgroup.quad (0x20000+0x808)++0x07
hide.quad 0x00 "JR1AAA0,Job Ring 1 Address-Array Address 1 Register"
in
hgroup.quad (0x20000+0x810)++0x07
hide.quad 0x00 "JR1AAA2,Job Ring 1 Address-Array Address 2 Register"
in
hgroup.quad (0x20000+0x818)++0x07
hide.quad 0x00 "JR1AAA3,Job Ring 1 Address-Array Address 3 Register"
in
rgroup.long (0x20000+0xE00)++0x03
line.long 0x00 "REIR0JR1,Recoverable Error Interrupt Record 0 For Job Ring 1"
bitfld.long 0x00 31. "MISS,Miss" "Not occurred,Occurred"
bitfld.long 0x00 24.--25. "TYPE,Type of the recoverable error" ",Memory access,?..."
rgroup.quad (0x20000+0xE08)++0x07
line.quad 0x00 "REIR2JR1,Recoverable Error Interrupt Record 2 For Job Ring 1"
hexmask.quad 0x00 0.--48. 0x01 "ADDR,Address associated with the recoverable JR error"
rgroup.long (0x20000+0xE10)++0x07
line.long 0x00 "REIR4JR1,Recoverable Error Interrupt Record 4 For Job Ring 1"
bitfld.long 0x00 30.--31. "MIX,Memory interface index" "0,1,2,3"
bitfld.long 0x00 28.--29. "ERR,AXI error response" "0,1,2,3"
newline
bitfld.long 0x00 25. "BMT,Bypass memory translation transaction attribute" "0,1"
bitfld.long 0x00 24. "PL,Privilege level transaction attribute" "0,1"
newline
bitfld.long 0x00 23. "RWB,Read or write" "Read,Write"
bitfld.long 0x00 20.--22. "AXPROT,AXI protection transaction attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--19. "AXCACHE,AXI cache control transaction attribute" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 0.--6. 1. "ICID,Holds the ICID associated with the recoverable error"
line.long 0x04 "REIR5JR1,Recoverable Error Interrupt Record 5 For Job Ring 1"
bitfld.long 0x04 24. "SAFE,Indicates whether the AXI transaction was a 'safe' transaction" "Not safe,Safe"
bitfld.long 0x04 16.--19. "BID,Block identifier of the source of the AXI transaction" "General,Job ring 0,Job ring 1,Job ring 2,Job ring 3,,Real-time integrity check,,DECO 0/CHA CCB 0,DECO 1/CHA CCB 1,?..."
tree.end
tree "Job Ring 2"
group.quad 0x30000++0x07
line.quad 0x00 "IRBAR_JR2,Input Ring Base Address Register For Job Ring 2"
hexmask.quad 0x00 0.--48. 0x01 "IRBA,Input ring base address"
group.long (0x30000+0x0C)++0x03
line.long 0x00 "IRSR_JR2,Input Ring Size Register For Job Ring 2"
hexmask.long.word 0x00 0.--9. 1. "IRS,Input ring size"
group.long (0x30000+0x14)++0x03
line.long 0x00 "IRSAR_JR2,Input Ring Slots Available Register For Job Ring 2"
hexmask.long.word 0x00 0.--9. 1. "IRSA,Input ring slots available"
group.long (0x30000+0x1C)++0x03
line.long 0x00 "IRJAR_JR2,Input Ring Jobs Added Register For Job Ring 2"
hexmask.long.word 0x00 0.--9. 1. "IRJA,Input ring jobs added"
group.quad (0x30000+0x20)++0x07
line.quad 0x00 "ORBAR_JR2,Output Ring Base Address Register For Job Ring 2"
hexmask.quad 0x00 0.--48. 0x01 "ORBA,Output ring base address"
group.long (0x30000+0x2C)++0x03
line.long 0x00 "ORSR_JR2,Output Ring Size Register For Job Ring 2"
hexmask.long.word 0x00 0.--9. 1. "ORS,Output ring size"
group.long (0x30000+0x34)++0x03
line.long 0x00 "ORJRR_JR2,Output Ring Jobs Removed Register For Job Ring 2"
hexmask.long.word 0x00 0.--9. 1. "ORJR,Output ring jobs removed"
group.long (0x30000+0x3C)++0x03
line.long 0x00 "ORSFR_JR2,Output Ring Slots Full Register For Job Ring 2"
hexmask.long.word 0x00 0.--9. 1. "ORSF,Output ring slots full"
if (((per.l(ad:0x8000000+0x30000+0x44))&0xF0000000)==0x00)
rgroup.long (0x30000+0x44)++0x03
line.long 0x00 "JRSTAR_JR2,Job Ring Output Status Register For Job Ring 2"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
elif (((per.l(ad:0x8000000+0x30000+0x44))&0xF0000000)==0x20000000)
rgroup.long (0x30000+0x44)++0x03
line.long 0x00 "JRSTAR_JR22,Job Ring Output Status Register For Job Ring 2"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to an error within the descriptor (number of words)"
bitfld.long 0x00 4.--7. "CHAID,Algorithm that generated the error" "CCB,AESA,DESA,,MDHA,RNG,SNOWf8,KFHA f8/9,PKHA,CRCA,SNOWf9,ZUCE,ZUCA,?..."
newline
bitfld.long 0x00 0.--3. "ERRID,Descriptor error ID" "None,Mode,Data size,Key size/Instantiated,Not instantiated/A size,Instantiated/B size,Prediction resistance/Data out of sequence /ECC F2M,Prediction resist./Divide by 0,Modulus even,Key parity/Secure key generation,ICV check failed,Hardware,CCM AAD size/Continuous check/Invalid key,Class 1 or 2 CHA is not reset,Invalid CHA combination,Invalid CHA"
elif (((per.l(ad:0x8000000+0x30000+0x44))&0xF0000000)==0x30000000)
rgroup.long (0x30000+0x44)++0x03
line.long 0x00 "JRSTAR_JR23,Job Ring Output Status Register For Job Ring 2"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to JUMP HALT command within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "LOCAL_OFFSET,User defined value"
elif (((per.l(ad:0x8000000+0x30000+0x44))&0xF0000000)==0x40000000)
rgroup.long (0x30000+0x44)++0x03
line.long 0x00 "JRSTAR_JR24,Job Ring Output Status Register For Job Ring 2"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to an error within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "ERROR,Error Code"
elif (((per.l(ad:0x8000000+0x30000+0x44))&0xF0000000)==0x60000000)
rgroup.long (0x30000+0x44)++0x03
line.long 0x00 "JRSTAR_JR26,Job Ring Output Status Register For Job Ring 2"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 8.--11. "NADDR,Number of descriptor addresses requested" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--7. "ERROR,Error Code" "No error,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Descriptor address,Descriptor,?..."
elif (((per.l(ad:0x8000000+0x30000+0x44))&0xF0000000)==0x70000000)
rgroup.long (0x30000+0x44)++0x03
line.long 0x00 "JRSTAR_JR27,Job Ring Output Status Register For Job Ring 2"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to JUMP HALT command within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "COND,PKHA/Math condition codes field from JUMP HALT command"
endif
group.long (0x30000+0x4C)++0x0B
line.long 0x00 "JRINTR_JR2,Job Ring Interrupt Status Register For Job Ring 2"
hexmask.long.word 0x00 16.--29. 1. "ERR_ORWI,Output ring write index with error"
rbitfld.long 0x00 8.--12. "ERR_TYPE,Error type" ",Writing to OR,,Bad IR,Bad OR,Invalid write to IR,Invalid write to OR,Job ring reset,ORJRR > ORSFR,IRJAR > IRSAR,Writing ORSF > ORS,Writing IRSA > IRS,Writing ORWI > ORS in bytes,Writing IRRI > IRS in bytes,Writing IRSA when ring is active,Writing IRRI when ring is active,Writing ORSF when ring is active,Writing ORWI when ring is active,?..."
newline
eventfld.long 0x00 5. "EXIT_FAIL,Exit SecMon fail state" "Not exited,Exited"
eventfld.long 0x00 4. "ENTER_FAIL,Enter SecMon fail state" "Not entered,Entered"
newline
eventfld.long 0x00 3. "HALT[1],Halt the job ring 1" ",Requested"
eventfld.long 0x00 2. "[0],Halt the job ring 0" ",Flushed-Halted/Clear"
newline
eventfld.long 0x00 1. "JRE,Job ring error" "No error,Error"
eventfld.long 0x00 0. "JRI,Job ring interrupt" "No interrupt,Interrupt"
line.long 0x04 "JRCFGR_JR2_MS,Job Ring Configuration Register For Job Ring 2 Most Significant Half"
bitfld.long 0x04 30. "INCL_SEQ_OUT,Include sequence out length" "Not included,Included"
bitfld.long 0x04 29. "FAIL_MODE,Fail mode control" "Halt,Continue"
line.long 0x08 "JRCFGR_JR2_LS,Job Ring Configuration Register For Job Ring 2 Least Significant Half"
hexmask.long.word 0x08 16.--31. 0x01 "ICTT,Interrupt coalescing timer threshold"
hexmask.long.byte 0x08 8.--15. 0x01 "ICDCT,Interrupt coalescing descriptor count threshold"
newline
bitfld.long 0x08 1. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x08 0. "IMSK,Interrupt mask" "Not masked,Masked"
group.long (0x30000+0x5C)++0x03
line.long 0x00 "IRRIR_JR2,Input Ring Read Index Register For Job Ring 2"
hexmask.long.word 0x00 0.--12. 1. "IRRI,Input ring read index"
group.long (0x30000+0x64)++0x03
line.long 0x00 "ORWIR_JR2,Output Ring Write Index Register For Job Ring 2"
hexmask.long.word 0x00 0.--13. 1. "ORWI,Output ring write index"
wgroup.long (0x30000+0x6C)++0x03
line.long 0x00 "JRCR_JR2,Job Ring Command Register For Job Ring 2"
bitfld.long 0x00 1. "PARK,Park" "No effect,Park"
bitfld.long 0x00 0. "RESET,Reset" "No effect,Reset"
hgroup.long (0x30000+0x704)++0x03
hide.long 0x00 "JR2AAV,Job Ring 2 Address-Array Valid Register"
in
hgroup.quad (0x30000+0x800)++0x07
hide.quad 0x00 "JR2AAA0,Job Ring 2 Address-Array Address 0 Register"
in
hgroup.quad (0x30000+0x808)++0x07
hide.quad 0x00 "JR2AAA0,Job Ring 2 Address-Array Address 1 Register"
in
hgroup.quad (0x30000+0x810)++0x07
hide.quad 0x00 "JR2AAA2,Job Ring 2 Address-Array Address 2 Register"
in
hgroup.quad (0x30000+0x818)++0x07
hide.quad 0x00 "JR2AAA3,Job Ring 2 Address-Array Address 3 Register"
in
rgroup.long (0x30000+0xE00)++0x03
line.long 0x00 "REIR0JR2,Recoverable Error Interrupt Record 0 For Job Ring 2"
bitfld.long 0x00 31. "MISS,Miss" "Not occurred,Occurred"
bitfld.long 0x00 24.--25. "TYPE,Type of the recoverable error" ",Memory access,?..."
rgroup.quad (0x30000+0xE08)++0x07
line.quad 0x00 "REIR2JR2,Recoverable Error Interrupt Record 2 For Job Ring 2"
hexmask.quad 0x00 0.--48. 0x01 "ADDR,Address associated with the recoverable JR error"
rgroup.long (0x30000+0xE10)++0x07
line.long 0x00 "REIR4JR2,Recoverable Error Interrupt Record 4 For Job Ring 2"
bitfld.long 0x00 30.--31. "MIX,Memory interface index" "0,1,2,3"
bitfld.long 0x00 28.--29. "ERR,AXI error response" "0,1,2,3"
newline
bitfld.long 0x00 25. "BMT,Bypass memory translation transaction attribute" "0,1"
bitfld.long 0x00 24. "PL,Privilege level transaction attribute" "0,1"
newline
bitfld.long 0x00 23. "RWB,Read or write" "Read,Write"
bitfld.long 0x00 20.--22. "AXPROT,AXI protection transaction attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--19. "AXCACHE,AXI cache control transaction attribute" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 0.--6. 1. "ICID,Holds the ICID associated with the recoverable error"
line.long 0x04 "REIR5JR2,Recoverable Error Interrupt Record 5 For Job Ring 2"
bitfld.long 0x04 24. "SAFE,Indicates whether the AXI transaction was a 'safe' transaction" "Not safe,Safe"
bitfld.long 0x04 16.--19. "BID,Block identifier of the source of the AXI transaction" "General,Job ring 0,Job ring 1,Job ring 2,Job ring 3,,Real-time integrity check,,DECO 0/CHA CCB 0,DECO 1/CHA CCB 1,?..."
tree.end
tree "Job Ring 3"
group.quad 0x40000++0x07
line.quad 0x00 "IRBAR_JR3,Input Ring Base Address Register For Job Ring 3"
hexmask.quad 0x00 0.--48. 0x01 "IRBA,Input ring base address"
group.long (0x40000+0x0C)++0x03
line.long 0x00 "IRSR_JR3,Input Ring Size Register For Job Ring 3"
hexmask.long.word 0x00 0.--9. 1. "IRS,Input ring size"
group.long (0x40000+0x14)++0x03
line.long 0x00 "IRSAR_JR3,Input Ring Slots Available Register For Job Ring 3"
hexmask.long.word 0x00 0.--9. 1. "IRSA,Input ring slots available"
group.long (0x40000+0x1C)++0x03
line.long 0x00 "IRJAR_JR3,Input Ring Jobs Added Register For Job Ring 3"
hexmask.long.word 0x00 0.--9. 1. "IRJA,Input ring jobs added"
group.quad (0x40000+0x20)++0x07
line.quad 0x00 "ORBAR_JR3,Output Ring Base Address Register For Job Ring 3"
hexmask.quad 0x00 0.--48. 0x01 "ORBA,Output ring base address"
group.long (0x40000+0x2C)++0x03
line.long 0x00 "ORSR_JR3,Output Ring Size Register For Job Ring 3"
hexmask.long.word 0x00 0.--9. 1. "ORS,Output ring size"
group.long (0x40000+0x34)++0x03
line.long 0x00 "ORJRR_JR3,Output Ring Jobs Removed Register For Job Ring 3"
hexmask.long.word 0x00 0.--9. 1. "ORJR,Output ring jobs removed"
group.long (0x40000+0x3C)++0x03
line.long 0x00 "ORSFR_JR3,Output Ring Slots Full Register For Job Ring 3"
hexmask.long.word 0x00 0.--9. 1. "ORSF,Output ring slots full"
if (((per.l(ad:0x8000000+0x40000+0x44))&0xF0000000)==0x00)
rgroup.long (0x40000+0x44)++0x03
line.long 0x00 "JRSTAR_JR3,Job Ring Output Status Register For Job Ring 3"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
elif (((per.l(ad:0x8000000+0x40000+0x44))&0xF0000000)==0x20000000)
rgroup.long (0x40000+0x44)++0x03
line.long 0x00 "JRSTAR_JR32,Job Ring Output Status Register For Job Ring 3"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to an error within the descriptor (number of words)"
bitfld.long 0x00 4.--7. "CHAID,Algorithm that generated the error" "CCB,AESA,DESA,,MDHA,RNG,SNOWf8,KFHA f8/9,PKHA,CRCA,SNOWf9,ZUCE,ZUCA,?..."
newline
bitfld.long 0x00 0.--3. "ERRID,Descriptor error ID" "None,Mode,Data size,Key size/Instantiated,Not instantiated/A size,Instantiated/B size,Prediction resistance/Data out of sequence /ECC F2M,Prediction resist./Divide by 0,Modulus even,Key parity/Secure key generation,ICV check failed,Hardware,CCM AAD size/Continuous check/Invalid key,Class 1 or 2 CHA is not reset,Invalid CHA combination,Invalid CHA"
elif (((per.l(ad:0x8000000+0x40000+0x44))&0xF0000000)==0x30000000)
rgroup.long (0x40000+0x44)++0x03
line.long 0x00 "JRSTAR_JR33,Job Ring Output Status Register For Job Ring 3"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to JUMP HALT command within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "LOCAL_OFFSET,User defined value"
elif (((per.l(ad:0x8000000+0x40000+0x44))&0xF0000000)==0x40000000)
rgroup.long (0x40000+0x44)++0x03
line.long 0x00 "JRSTAR_JR34,Job Ring Output Status Register For Job Ring 3"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to an error within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "ERROR,Error Code"
elif (((per.l(ad:0x8000000+0x40000+0x44))&0xF0000000)==0x60000000)
rgroup.long (0x40000+0x44)++0x03
line.long 0x00 "JRSTAR_JR36,Job Ring Output Status Register For Job Ring 3"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 8.--11. "NADDR,Number of descriptor addresses requested" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
newline
bitfld.long 0x00 0.--7. "ERROR,Error Code" "No error,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Descriptor address,Descriptor,?..."
elif (((per.l(ad:0x8000000+0x40000+0x44))&0xF0000000)==0x70000000)
rgroup.long (0x40000+0x44)++0x03
line.long 0x00 "JRSTAR_JR37,Job Ring Output Status Register For Job Ring 3"
bitfld.long 0x00 28.--31. "SSRC,Status source" "None,,CCB,Jump halt user,DECO,,Job ring,Condition codes,?..."
bitfld.long 0x00 27. "JMP,Jump to another descriptor" "Not occurred,Occurred"
newline
hexmask.long.byte 0x00 8.--15. 1. "DESCINDEX,Index to JUMP HALT command within the descriptor (number of words)"
hexmask.long.byte 0x00 0.--7. 1. "COND,PKHA/Math condition codes field from JUMP HALT command"
endif
group.long (0x40000+0x4C)++0x0B
line.long 0x00 "JRINTR_JR3,Job Ring Interrupt Status Register For Job Ring 3"
hexmask.long.word 0x00 16.--29. 1. "ERR_ORWI,Output ring write index with error"
rbitfld.long 0x00 8.--12. "ERR_TYPE,Error type" ",Writing to OR,,Bad IR,Bad OR,Invalid write to IR,Invalid write to OR,Job ring reset,ORJRR > ORSFR,IRJAR > IRSAR,Writing ORSF > ORS,Writing IRSA > IRS,Writing ORWI > ORS in bytes,Writing IRRI > IRS in bytes,Writing IRSA when ring is active,Writing IRRI when ring is active,Writing ORSF when ring is active,Writing ORWI when ring is active,?..."
newline
eventfld.long 0x00 5. "EXIT_FAIL,Exit SecMon fail state" "Not exited,Exited"
eventfld.long 0x00 4. "ENTER_FAIL,Enter SecMon fail state" "Not entered,Entered"
newline
eventfld.long 0x00 3. "HALT[1],Halt the job ring 1" ",Requested"
eventfld.long 0x00 2. "[0],Halt the job ring 0" ",Flushed-Halted/Clear"
newline
eventfld.long 0x00 1. "JRE,Job ring error" "No error,Error"
eventfld.long 0x00 0. "JRI,Job ring interrupt" "No interrupt,Interrupt"
line.long 0x04 "JRCFGR_JR3_MS,Job Ring Configuration Register For Job Ring 3 Most Significant Half"
bitfld.long 0x04 30. "INCL_SEQ_OUT,Include sequence out length" "Not included,Included"
bitfld.long 0x04 29. "FAIL_MODE,Fail mode control" "Halt,Continue"
line.long 0x08 "JRCFGR_JR3_LS,Job Ring Configuration Register For Job Ring 3 Least Significant Half"
hexmask.long.word 0x08 16.--31. 0x01 "ICTT,Interrupt coalescing timer threshold"
hexmask.long.byte 0x08 8.--15. 0x01 "ICDCT,Interrupt coalescing descriptor count threshold"
newline
bitfld.long 0x08 1. "ICEN,Interrupt coalescing enable" "Disabled,Enabled"
bitfld.long 0x08 0. "IMSK,Interrupt mask" "Not masked,Masked"
group.long (0x40000+0x5C)++0x03
line.long 0x00 "IRRIR_JR3,Input Ring Read Index Register For Job Ring 3"
hexmask.long.word 0x00 0.--12. 1. "IRRI,Input ring read index"
group.long (0x40000+0x64)++0x03
line.long 0x00 "ORWIR_JR3,Output Ring Write Index Register For Job Ring 3"
hexmask.long.word 0x00 0.--13. 1. "ORWI,Output ring write index"
wgroup.long (0x40000+0x6C)++0x03
line.long 0x00 "JRCR_JR3,Job Ring Command Register For Job Ring 3"
bitfld.long 0x00 1. "PARK,Park" "No effect,Park"
bitfld.long 0x00 0. "RESET,Reset" "No effect,Reset"
hgroup.long (0x40000+0x704)++0x03
hide.long 0x00 "JR3AAV,Job Ring 3 Address-Array Valid Register"
in
hgroup.quad (0x40000+0x800)++0x07
hide.quad 0x00 "JR3AAA0,Job Ring 3 Address-Array Address 0 Register"
in
hgroup.quad (0x40000+0x808)++0x07
hide.quad 0x00 "JR3AAA0,Job Ring 3 Address-Array Address 1 Register"
in
hgroup.quad (0x40000+0x810)++0x07
hide.quad 0x00 "JR3AAA2,Job Ring 3 Address-Array Address 2 Register"
in
hgroup.quad (0x40000+0x818)++0x07
hide.quad 0x00 "JR3AAA3,Job Ring 3 Address-Array Address 3 Register"
in
rgroup.long (0x40000+0xE00)++0x03
line.long 0x00 "REIR0JR3,Recoverable Error Interrupt Record 0 For Job Ring 3"
bitfld.long 0x00 31. "MISS,Miss" "Not occurred,Occurred"
bitfld.long 0x00 24.--25. "TYPE,Type of the recoverable error" ",Memory access,?..."
rgroup.quad (0x40000+0xE08)++0x07
line.quad 0x00 "REIR2JR3,Recoverable Error Interrupt Record 2 For Job Ring 3"
hexmask.quad 0x00 0.--48. 0x01 "ADDR,Address associated with the recoverable JR error"
rgroup.long (0x40000+0xE10)++0x07
line.long 0x00 "REIR4JR3,Recoverable Error Interrupt Record 4 For Job Ring 3"
bitfld.long 0x00 30.--31. "MIX,Memory interface index" "0,1,2,3"
bitfld.long 0x00 28.--29. "ERR,AXI error response" "0,1,2,3"
newline
bitfld.long 0x00 25. "BMT,Bypass memory translation transaction attribute" "0,1"
bitfld.long 0x00 24. "PL,Privilege level transaction attribute" "0,1"
newline
bitfld.long 0x00 23. "RWB,Read or write" "Read,Write"
bitfld.long 0x00 20.--22. "AXPROT,AXI protection transaction attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--19. "AXCACHE,AXI cache control transaction attribute" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 0.--6. 1. "ICID,Holds the ICID associated with the recoverable error"
line.long 0x04 "REIR5JR3,Recoverable Error Interrupt Record 5 For Job Ring 3"
bitfld.long 0x04 24. "SAFE,Indicates whether the AXI transaction was a 'safe' transaction" "Not safe,Safe"
bitfld.long 0x04 16.--19. "BID,Block identifier of the source of the AXI transaction" "General,Job ring 0,Job ring 1,Job ring 2,Job ring 3,,Real-time integrity check,,DECO 0/CHA CCB 0,DECO 1/CHA CCB 1,?..."
tree.end
tree "RTIC (Run-Time Integrity Checker Registers)"
hgroup.long 0x60004++0x03
hide.long 0x00 "RSTA,RTIC Status Register"
in
newline
group.long 0x6000C++0x03
line.long 0x00 "RCMD,RTIC Command Register"
bitfld.long 0x00 3. "RTD,Run time disable" "No,Yes"
bitfld.long 0x00 2. "RTC,Run time check" "Disable,Enable"
bitfld.long 0x00 1. "HO,Hash once" "Disable,Enable"
newline
bitfld.long 0x00 0. "CINT,Clear interrupt" "No effect,Clear"
group.long 0x60014++0x03
line.long 0x00 "RCTL,RTIC Control Register"
bitfld.long 0x00 31. "DSV,DECOSEL valid" "Not valid,Valid"
bitfld.long 0x00 24.--25. "DECOSEL,DECO select" "DECO 0,DECO 1,?..."
bitfld.long 0x00 20. "RIDLE,RTIC negate setting for the IPG_IDLE signal" "Hashing,Run-Time"
newline
bitfld.long 0x00 19. "RALG[3],RTIC algorithm select for Memory Block D" "SHA-256,SHA-512"
bitfld.long 0x00 18. "[2],RTIC algorithm select for memory block C" "SHA-256,SHA-512"
bitfld.long 0x00 17. "[1],RTIC algorithm select for memory block B" "SHA-256,SHA-512"
newline
bitfld.long 0x00 16. "[0],RTIC algorithm select for memory block A" "SHA-256,SHA-512"
bitfld.long 0x00 15. "RTMU[3],Run time unlock memory block D" "Not unlocked,Unlocked"
bitfld.long 0x00 14. "[2],Run time unlock memory block C" "Not unlocked,Unlocked"
newline
bitfld.long 0x00 13. "[1],Run time unlock memory block B" "Not unlocked,Unlocked"
bitfld.long 0x00 12. "[0],Run time unlock memory block A" "Not unlocked,Unlocked"
bitfld.long 0x00 11. "RTME[3],Run time enable memory block D" "Disabled,Enabled"
newline
bitfld.long 0x00 10. "[2],Run time enable memory block C" "Disabled,Enabled"
bitfld.long 0x00 9. "[1],Run time enable memory block B" "Disabled,Enabled"
bitfld.long 0x00 8. "[0],Run time enable memory block A" "Disabled,Enabled"
newline
bitfld.long 0x00 7. "HOME[3],Hash once enable memory block D" "Disabled,Enabled"
bitfld.long 0x00 6. "[2],Hash once enable memory block C" "Disabled,Enabled"
bitfld.long 0x00 5. "[1],Hash once enable memory block B" "Disabled,Enabled"
newline
bitfld.long 0x00 4. "[0],Hash once enable memory block A" "Disabled,Enabled"
bitfld.long 0x00 1.--3. "RREQS,RTIC request size" "1 block,1 block,2 blocks,3 blocks,4 blocks,5 blocks,6 blocks,7 blocks"
bitfld.long 0x00 0. "IE,Interrupt enable" "Disabled,Enabled"
group.long 0x6001C++0x03
line.long 0x00 "RTHR,RTIC Throttle Register"
group.quad 0x60028++0x07
line.quad 0x00 "RWDOG,RTIC Watchdog Timer"
hexmask.quad 0x00 0.--47. 1. "RWDOG,Run time watchdog time-out value"
tree "RTIC Memory Block Registers"
repeat 8. (increment 0x60100 0x10)(strings "A" "A" "B" "B" "C" "C" "D" "D")(strings "0" "1" "0" "1" "0" "1" "0" "1")
group.quad $1++0x07
line.quad 0x00 "RM$2A$3,RTIC Memory Block $2 Address $3 Register"
hexmask.quad 0x00 0.--48. 0x01 "MEMBLKADDR,Memory block address"
group.long ($1+0x0C)++0x03
line.long 0x00 "RM$2L$3,RTIC Memory Block $2 Length $3 Register"
repeat.end
tree.end
tree "Endian Format Registers"
tree "Big Endian Format"
repeat 32. (increment 0x60200 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "RAMDB_$2,RTIC Memory Block A Hash Result Big Endian Format Register $2"
repeat.end
repeat 32. (increment 0x60300 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "RBMDB_$2,RTIC Memory Block B Hash Result Big Endian Format Register $2"
repeat.end
repeat 32. (increment 0x60400 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "RCMDB_$2,RTIC Memory Block C Hash Result Big Endian Format Register $2"
repeat.end
repeat 32. (increment 0x60500 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "RDMDB_$2,RTIC Memory Block D Hash Result Big Endian Format Register $2"
repeat.end
tree.end
tree "Little Endian Format"
repeat 32. (increment 0x60280 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "RAMDL_$2,RTIC Memory Block A Hash Result Little Endian Format Register $2"
repeat.end
repeat 32. (increment 0x60380 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "RBMDL_$2,RTIC Memory Block B Hash Result Little Endian Format Register $2"
repeat.end
repeat 32. (increment 0x60480 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "RCMDL_$2,RTIC Memory Block C Hash Result Little Endian Format Register $2"
repeat.end
repeat 32. (increment 0x60580 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "RDMDL_$2,RTIC Memory Block D Hash Result Little Endian Format Register $2"
repeat.end
tree.end
tree.end
newline
rgroup.long 0x60E00++0x03
line.long 0x00 "REIR0RTIC,Recoverable Error Interrupt Record 0 For RTIC"
bitfld.long 0x00 31. "MISS,Second RTIC recoverable error occurrence" "Not occurred,Occurred"
bitfld.long 0x00 24.--25. "TYPE,This field indicates the type of the recoverable error" ",Memory access,?..."
rgroup.quad 0x60E08++0x07
line.quad 0x00 "REIR2RTIC,Recoverable Error Interrupt Record 2 For RTIC"
rgroup.long 0x60E10++0x07
line.long 0x00 "REIR4RTIC,Recoverable Error Interrupt Record 4 For RTIC"
bitfld.long 0x00 30.--31. "MIX,Memory interface index associated" "0,1,2,3"
bitfld.long 0x00 28.--29. "ERR,AXI error response associated" "0,1,2,3"
bitfld.long 0x00 25. "BMT,Bypass memory translation transaction attribute" "0,1"
newline
bitfld.long 0x00 24. "PL,Privilege level transaction attribute" "0,1"
bitfld.long 0x00 23. "RWB,Read or write" "Read,Write"
bitfld.long 0x00 20.--22. "AXPROT,AXI protection transaction attribute" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 16.--19. "AXCACHE,AXI cache control transaction attribute" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
hexmask.long.byte 0x00 0.--6. 1. "ICID,ICID transaction attribute associated"
line.long 0x04 "REIR5RTIC,Recoverable Error Interrupt Record 5 For RTIC"
bitfld.long 0x04 24. "SAFE,AXI transaction associated being a safe transaction" "Not safe,Safe"
bitfld.long 0x04 16.--19. "BID,Block identifier of the source of the AXI transaction associated" "General,Job ring 0,Job ring 1,Job ring 2,Job ring 3,,Real-time integrity check,,DECO 0/CHA CCB 0,DECO 1/CHA CCB 1,?..."
tree.end
tree "CCB Mode Control And Status Registers"
if (((per.l(ad:0x8000000+(0x80004+0x44)))&0xF000)==0x5000)
group.long 0x80004++0x03
line.long 0x00 "C0C1MR_RNG,CCB 0 Class 1 Mode Register Format For RNG4"
hexmask.long.byte 0x00 16.--23. 1. "ALG,Algorithm selection"
bitfld.long 0x00 13. "C2K,Class 2 key" "Class 1,Class 2"
bitfld.long 0x00 12. "SK,Secure key" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "AI,Additional input" "Not included,Included"
bitfld.long 0x00 10. "PS,Personalization string" "Not included,Included"
bitfld.long 0x00 9. "OBP,Odd byte parity" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "NZB,Non-zero bytes" "Disabled,Enabled"
bitfld.long 0x00 4.--5. "SH,State handle" "Handle 0,Handle 1,?..."
bitfld.long 0x00 2.--3. "AS,Algorithm state" "Generate,Instantiate,Reseed,Uninstantiate"
newline
bitfld.long 0x00 1. "PR,Prediction resistance" "0,1"
bitfld.long 0x00 0. "TST,Test mode request" "0,1"
elif (((per.l(ad:0x8000000+(0x80004+0x44)))&0xF000)==0x8000)
if (((per.l(ad:0x8000000+0x80004))&0x3F)==0x01)
group.long 0x80004++0x03
line.long 0x00 "C0C1MR_PK,CCB 0 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 19. "ARAM,A RAM for zeroization" "Not selected,Selected"
bitfld.long 0x00 18. "BRAM,B RAM for zeroization" "Not selected,Selected"
bitfld.long 0x00 17. "ERAM,E RAM for zeroization" "Not selected,Selected"
newline
bitfld.long 0x00 16. "NRAM,N RAM for zeroization" "Not selected,Selected"
bitfld.long 0x00 9. "QUADRANT_3,Quadrant 3" "Not selected,Selected"
bitfld.long 0x00 8. "QUADRANT_2,Quadrant 2" "Not selected,Selected"
newline
bitfld.long 0x00 7. "QUADRANT_1,Quadrant 1" "Not selected,Selected"
bitfld.long 0x00 6. "QUADRANT_0,Quadrant 0" "Not selected,Selected"
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
elif (((per.l(ad:0x8000000+0x80004))&0x3F)==(0x02||0x03||0x04||0x05||0x06||0x07||0x08||0x0C||0x0E||0x0F||0x16||0x17||0x18||0x19||0x1A||0x1B||0x1D||0x1E||0x1F))
group.long 0x80004++0x03
line.long 0x00 "C0C1MR_PK,CCB 0 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 19. "INM,Inputs in montgomery form" "Normal,Montgomery"
bitfld.long 0x00 18. "OUTM,Outputs in montgomery form" "Normal,Montgomery"
bitfld.long 0x00 17. "F2M,Integer or binary polynomial arithmetic" "Integer,Binary"
newline
bitfld.long 0x00 10. "TEQ,Timing equalized" "Not selected,Selected"
bitfld.long 0x00 8.--9. "OUTSEL,Output destination select" "B,A,?..."
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
elif (((per.l(ad:0x8000000+0x80004))&0x3F)==(0x09||0x0A||0x0B||0x1C))
group.long 0x80004++0x03
line.long 0x00 "C0C1MR_PK,CCB 0 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 17. "F2M,Integer or binary polynomial arithmetic" "Integer,Binary"
bitfld.long 0x00 16. "R2,R2 mod N supplied as an input or calculated by routine" "Calculated,Input"
bitfld.long 0x00 10. "TEQ,Timing equalized" "Not selected,Selected"
newline
bitfld.long 0x00 8.--9. "OUTSEL,Output destination select" "B,A,?..."
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
elif (((per.l(ad:0x8000000+0x80004))&0x3F)==(0x10||0x11))
group.long 0x80004++0x03
line.long 0x00 "C0C1MR_PK,CCB 0 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 17.--19. "SOURCE_REGISTER,Source register" "A,B,,N,?..."
bitfld.long 0x00 10.--11. 16. "DESTINATION_REGISTER,Destination register" "A,B,E,N,?..."
bitfld.long 0x00 8.--9. "SOURCE_SEGMENT,Source segment" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "DESTINATION_SEGMENT,Destination segment" "0,1,2,3"
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
else
group.long 0x80004++0x03
line.long 0x00 "C0C1MR_PK,CCB 0 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
endif
else
group.long 0x80004++0x03
line.long 0x00 "C0C1MR_NPK,CCB 0 Class 1 Mode Register Format For Non-Public Key Algorithms"
hexmask.long.byte 0x00 16.--23. 1. "ALG,Algorithm selection"
bitfld.long 0x00 13. "C2K,Class 2 key" "Class 1,Class 2"
hexmask.long.word 0x00 4.--12. 1. "AAI,Additional algorithm information"
newline
bitfld.long 0x00 2.--3. "AS,Algorithm state" "Updated,Initialized,Finalized,Initialized/Finalized"
bitfld.long 0x00 1. "ICV_TEST,ICV checking/test AES fault detection" "No,Yes"
bitfld.long 0x00 0. "ENC,Encryption or decryption" "Decrypt,Encrypt"
endif
group.long (0x80004+0x08)++0x03
line.long 0x00 "C0C1KSR,CCB 0 Class 1 Key Size Register"
hexmask.long.byte 0x00 0.--6. 1. "C1KS,Class 1 key size in bytes"
group.quad (0x80004+0x0C)++0x07
line.quad 0x00 "C0C1DSR,CCB 0 Class 1 Data Size Register"
rbitfld.quad 0x00 61.--63. "NUMBITS,Class 1 data size number of bits" "0,1,2,3,4,5,6,7"
rbitfld.quad 0x00 32. "C1CY,Class 1 data size carry" "No carry,Carry"
hexmask.quad.long 0x00 0.--31. 1. "C1DS,Class 1 data size"
group.long (0x80004+0x18)++0x03
line.long 0x00 "C0C1ICVSR,CCB 0 Class 1 ICV Size Register"
bitfld.long 0x00 0.--4. "C1ICVS,Class 1 ICV size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
wgroup.long (0x80004+0x30)++0x03
line.long 0x00 "C0CCTRL,CCB 0 CHA Control Register"
bitfld.long 0x00 27. "UB,Unload the PKHA B memory" "No effect,Unload"
bitfld.long 0x00 26. "UA,Unload the PKHA A memory" "No effect,Unload"
bitfld.long 0x00 24. "UN,Unload the PKHA N memory" "No effect,Unload"
newline
bitfld.long 0x00 23. "UB3,Unload the PKHA B3 memory" "No effect,Unload"
bitfld.long 0x00 22. "UB2,Unload the PKHA B2 memory" "No effect,Unload"
bitfld.long 0x00 21. "UB1,Unload the PKHA B1 memory" "No effect,Unload"
newline
bitfld.long 0x00 20. "UB0,Unload the PKHA B0 memory" "No effect,Unload"
bitfld.long 0x00 19. "UA3,Unload the PKHA A3 memory" "No effect,Unload"
bitfld.long 0x00 18. "UA2,Unload the PKHA A2 memory" "No effect,Unload"
newline
bitfld.long 0x00 17. "UA1,Unload the PKHA A1 memory" "No effect,Unload"
bitfld.long 0x00 16. "UA0,Unload the PKHA A0 memory" "No effect,Unload"
bitfld.long 0x00 13. "AES_C2,Reset AES class 2 CHA" "No effect,Reset"
newline
bitfld.long 0x00 12. "ZUCA,Reset ZUC authentication accelerator" "No effect,Reset"
bitfld.long 0x00 11. "ZUCE,Reset ZUC encryption accelerator" "No effect,Reset"
bitfld.long 0x00 10. "SNF9,Reset SNOW f9 hardware accelerator" "No effect,Reset"
newline
bitfld.long 0x00 9. "RNG,Reset random number generator" "No effect,Reset"
bitfld.long 0x00 8. "CRC,Reset CRC accelerator" "No effect,Reset"
bitfld.long 0x00 7. "MD,Reset message digest hardware accelerator" "No effect,Reset"
newline
bitfld.long 0x00 6. "PK,Reset public key hardware accelerator" "No effect,Reset"
bitfld.long 0x00 5. "SNF8,Reset SNOW f8 hardware accelerator" "No effect,Reset"
bitfld.long 0x00 4. "KAS,Reset kasumi f8/f9 hardware accelerator" "No effect,Reset"
newline
bitfld.long 0x00 2. "DES,Reset DES accelerator" "No effect,Reset"
bitfld.long 0x00 1. "AES,Reset AES accelerator" "No effect,Reset"
bitfld.long 0x00 0. "CCB,Reset CCB" "No effect,Reset"
group.long (0x80004+0x38)++0x03
line.long 0x00 "C0ICTL,CCB 0 Interrupt Control Register"
rbitfld.long 0x00 29. "ASEI,AES sec error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 28. "ZAEI,ZUCA error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 27. "ZEEI,ZUCE error interrupt detection" "Not detected,Detected"
newline
rbitfld.long 0x00 26. "S9EI,SNOW-f9 error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 25. "RNEI,RNG error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 24. "CEI,CRC error interrupt detection" "Not detected,Detected"
newline
rbitfld.long 0x00 23. "MEI,Hashing error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 22. "PEI,Public Key error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 21. "S8EI,SNOW-f8 error interrupt detection" "Not detected,Detected"
newline
rbitfld.long 0x00 20. "KEI,KFHA error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 18. "DEI,DESA error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 17. "AEI,AESA error interrupt detection" "Not detected,Detected"
newline
eventfld.long 0x00 13. "ASDI,AES sec done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 12. "ZADI,ZUCA done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 11. "ZEDI,ZUCE done interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x00 10. "S9DI,SNOW-f9 done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 9. "RNDI,RNG done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 8. "CDI,CRCA done interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "MDI,MDHA hashing done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 6. "PDI,PKHA done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 5. "S8DI,SNOW-f8 done interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x00 4. "KDI,KFHA done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "DDI,DESA done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 1. "ADI,AESA done interrupt" "No interrupt,Interrupt"
wgroup.long (0x80004+0x40)++0x03
line.long 0x00 "C0CWR,CCB 0 Clear Written Register"
bitfld.long 0x00 31. "CIF,Clear input FIFO (and NFIFO)" "No effect,Cleared"
bitfld.long 0x00 30. "COF,Clear output FIFO" "No effect,Cleared"
bitfld.long 0x00 29. "C1RST,Reset class 1 CHA" "No effect,Reset"
newline
bitfld.long 0x00 28. "C2RST,Reset class 2 CHA" "No effect,Reset"
bitfld.long 0x00 27. "C1D,Clear class 1 done interrupt" "No effect,Cleared"
bitfld.long 0x00 26. "C2D,Clear class 2 done interrupt" "No effect,Cleared"
newline
bitfld.long 0x00 25. "CDS,Clear descriptor sharing signal" "No effect,Cleared"
bitfld.long 0x00 22. "C2K,Clear the class 2 key register" "No effect,Cleared"
bitfld.long 0x00 21. "C2C,Clear the class 2 context register" "No effect,Cleared"
newline
bitfld.long 0x00 18. "C2DS,Clear the class 2 data size registers" "No effect,Cleared"
bitfld.long 0x00 16. "C2M,Clear the class 2 mode register" "No effect,Cleared"
bitfld.long 0x00 15. "CPKE,Clear the PKHA A size register" "No effect,Cleared"
newline
bitfld.long 0x00 14. "CPKN,Clear the PKHA N size register" "No effect,Cleared"
bitfld.long 0x00 13. "CPKB,Clear the PKHA B size register" "No effect,Cleared"
bitfld.long 0x00 12. "CPKA,Clear the PKHA E size register" "No effect,Cleared"
newline
bitfld.long 0x00 6. "C1K,Clear the class 1 key register" "No effect,Cleared"
bitfld.long 0x00 5. "C1C,Clear the class 1 context register" "No effect,Cleared"
bitfld.long 0x00 3. "C1ICV,Clear the class 1 ICV size register" "No effect,Cleared"
newline
bitfld.long 0x00 2. "C1DS,Clear the class 1 data size register" "No effect,Cleared"
bitfld.long 0x00 0. "C1M,Clear the class 1 mode register" "No effect,Cleared"
rgroup.long (0x80004+0x44)++0x07
line.long 0x00 "C0CSTA_MS,CCB 0 Status And Error Register (Most Significant)"
bitfld.long 0x00 28.--31. "CL2,Class 2 algorithms" ",,,,MD5/SHA,,,,,CRC,SNOW f9,,ZUC authentication,?..."
bitfld.long 0x00 16.--19. "ERRID2,Error ID 2" ",Mode,Data size,Key size,,,Data arrived out of sequence,,,,ICV check failed,Internal hardware failure,,,Invalid CHA combination,Invalid CHA"
bitfld.long 0x00 12.--15. "CL1,Class 1 algorithms" ",AES,DES,,,RNG,SNOW,Kasumi,Public key,,,ZUC encryption,?..."
newline
bitfld.long 0x00 0.--3. "ERRID1,Error ID 1" ",Mode,Data size,Key size,PKHA A memory size,PKHA B memory size,Data arrived out of sequence,PKHA divide by zero,PKHA modulus even,DES key parity,ICV check failed,Internal hardware failure,CCM AAD size,Class 1 CHA not reset,Invalid CHA combination,Invalid CHA"
line.long 0x04 "C0CSTA_LS,CCB 0 Status And Error Register (Least-Significant)"
bitfld.long 0x04 30. "PIZ,Public key operation is zero" "Not zero,Zero"
bitfld.long 0x04 29. "GCD,Greates common divisor is one" "Not one,One"
bitfld.long 0x04 28. "PRM,Public key is prime" "Not prime,Prime"
newline
bitfld.long 0x04 21. "SEI,Class 2 error interrupt" "No interrupt,Interrupt"
bitfld.long 0x04 20. "PEI,Class 1 error interrupt" "No interrupt,Interrupt"
bitfld.long 0x04 17. "SDI,Class 2 done interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x04 16. "PDI,Class 1 done interrupt" "No interrupt,Interrupt"
bitfld.long 0x04 12. "ZAB,ZUCA block busy" "Idle,Busy"
bitfld.long 0x04 11. "ZEB,ZUCE block busy" "Idle,Busy"
newline
bitfld.long 0x04 10. "S9B,SNOW f9 busy" "Idle,Busy"
bitfld.long 0x04 9. "RNB,RNG block busy" "Idle,Busy"
bitfld.long 0x04 8. "CB,CRC block busy" "Idle,Busy"
newline
bitfld.long 0x04 7. "MB,MDHA busy" "Idle,Busy"
bitfld.long 0x04 6. "PB,PKHA busy" "Idle,Busy"
bitfld.long 0x04 5. "S8B,SNOW f8" "Idle,Busy"
newline
bitfld.long 0x04 4. "KB,KFHA busy" "Idle,Busy"
bitfld.long 0x04 2. "DB,DESA busy" "Idle,Busy"
bitfld.long 0x04 1. "AB,AESA busy" "Idle,Busy"
group.long (0x80004+0x58)++0x03
line.long 0x00 "C0C1AADSZR,CCB 0 AAD Size Register"
bitfld.long 0x00 0.--3. "AASZ,AAD size in bytes mod 16" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x80004+0x60)++0x03
line.long 0x00 "C0C1IVSZR,CCB 0 Class 1 IV Size Register"
bitfld.long 0x00 0.--3. "IVSZ,IV size in bytes mod 16" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x80004+0x80)++0x03
line.long 0x00 "C0PKASZR,PKHA A Size Register 0"
hexmask.long.word 0x00 0.--9. 1. "PKASZ,PKHA A memory key size in bytes"
group.long (0x80004+0x88)++0x03
line.long 0x00 "C0PKBSZR,PKHA B Size Register 0"
hexmask.long.word 0x00 0.--9. 1. "PKBSZ,PKHA B memory key size in bytes"
group.long (0x80004+0x90)++0x03
line.long 0x00 "C0PKNSZR,PKHA N Size Register 0"
hexmask.long.word 0x00 0.--9. 1. "PKNSZ,PKHA N memory key size in bytes"
group.long (0x80004+0x98)++0x03
line.long 0x00 "C0PKESZR,PKHA E Size Register 0"
hexmask.long.word 0x00 0.--9. 1. "PKESZ,PKHA E memory key size in bytes"
if (((per.l(ad:0x8000000+(0x90004+0x44)))&0xF000)==0x5000)
group.long 0x90004++0x03
line.long 0x00 "C1C1MR_RNG,CCB 1 Class 1 Mode Register Format For RNG4"
hexmask.long.byte 0x00 16.--23. 1. "ALG,Algorithm selection"
bitfld.long 0x00 13. "C2K,Class 2 key" "Class 1,Class 2"
bitfld.long 0x00 12. "SK,Secure key" "Disabled,Enabled"
newline
bitfld.long 0x00 11. "AI,Additional input" "Not included,Included"
bitfld.long 0x00 10. "PS,Personalization string" "Not included,Included"
bitfld.long 0x00 9. "OBP,Odd byte parity" "Disabled,Enabled"
newline
bitfld.long 0x00 8. "NZB,Non-zero bytes" "Disabled,Enabled"
bitfld.long 0x00 4.--5. "SH,State handle" "Handle 0,Handle 1,?..."
bitfld.long 0x00 2.--3. "AS,Algorithm state" "Generate,Instantiate,Reseed,Uninstantiate"
newline
bitfld.long 0x00 1. "PR,Prediction resistance" "0,1"
bitfld.long 0x00 0. "TST,Test mode request" "0,1"
elif (((per.l(ad:0x8000000+(0x90004+0x44)))&0xF000)==0x8000)
if (((per.l(ad:0x8000000+0x90004))&0x3F)==0x01)
group.long 0x90004++0x03
line.long 0x00 "C1C1MR_PK,CCB 1 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 19. "ARAM,A RAM for zeroization" "Not selected,Selected"
bitfld.long 0x00 18. "BRAM,B RAM for zeroization" "Not selected,Selected"
bitfld.long 0x00 17. "ERAM,E RAM for zeroization" "Not selected,Selected"
newline
bitfld.long 0x00 16. "NRAM,N RAM for zeroization" "Not selected,Selected"
bitfld.long 0x00 9. "QUADRANT_3,Quadrant 3" "Not selected,Selected"
bitfld.long 0x00 8. "QUADRANT_2,Quadrant 2" "Not selected,Selected"
newline
bitfld.long 0x00 7. "QUADRANT_1,Quadrant 1" "Not selected,Selected"
bitfld.long 0x00 6. "QUADRANT_0,Quadrant 0" "Not selected,Selected"
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
elif (((per.l(ad:0x8000000+0x90004))&0x3F)==(0x02||0x03||0x04||0x05||0x06||0x07||0x08||0x0C||0x0E||0x0F||0x16||0x17||0x18||0x19||0x1A||0x1B||0x1D||0x1E||0x1F))
group.long 0x90004++0x03
line.long 0x00 "C1C1MR_PK,CCB 1 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 19. "INM,Inputs in montgomery form" "Normal,Montgomery"
bitfld.long 0x00 18. "OUTM,Outputs in montgomery form" "Normal,Montgomery"
bitfld.long 0x00 17. "F2M,Integer or binary polynomial arithmetic" "Integer,Binary"
newline
bitfld.long 0x00 10. "TEQ,Timing equalized" "Not selected,Selected"
bitfld.long 0x00 8.--9. "OUTSEL,Output destination select" "B,A,?..."
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
elif (((per.l(ad:0x8000000+0x90004))&0x3F)==(0x09||0x0A||0x0B||0x1C))
group.long 0x90004++0x03
line.long 0x00 "C1C1MR_PK,CCB 1 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 17. "F2M,Integer or binary polynomial arithmetic" "Integer,Binary"
bitfld.long 0x00 16. "R2,R2 mod N supplied as an input or calculated by routine" "Calculated,Input"
bitfld.long 0x00 10. "TEQ,Timing equalized" "Not selected,Selected"
newline
bitfld.long 0x00 8.--9. "OUTSEL,Output destination select" "B,A,?..."
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
elif (((per.l(ad:0x8000000+0x90004))&0x3F)==(0x10||0x11))
group.long 0x90004++0x03
line.long 0x00 "C1C1MR_PK,CCB 1 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 17.--19. "SOURCE_REGISTER,Source register" "A,B,,N,?..."
bitfld.long 0x00 10.--11. 16. "DESTINATION_REGISTER,Destination register" "A,B,E,N,?..."
bitfld.long 0x00 8.--9. "SOURCE_SEGMENT,Source segment" "0,1,2,3"
newline
bitfld.long 0x00 6.--7. "DESTINATION_SEGMENT,Destination segment" "0,1,2,3"
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
else
group.long 0x90004++0x03
line.long 0x00 "C1C1MR_PK,CCB 1 Class 1 Mode Register Format For Public Key Algorithms"
bitfld.long 0x00 0.--5. "FUNCTION,Function" ",CLEAR_MEMORY,ADD,SUB 1,SUB 2,MUL,EXP,AMODN,INV,ECC_MOD_ADD,ECC_MOD_DBL,ECC_MOD_MUL,R2,,GCD,PRIME_TEST,CM_NSIZE,CM_SRC_SIZE,,,,,SML_EXP,SQRT,DBL_A,DBL_B,SQR,CUBE,ECC_MOD_CHECK_POINT,SHIFT_RIGHT,COMPARE,EVALUATE,?..."
endif
else
group.long 0x90004++0x03
line.long 0x00 "C1C1MR_NPK,CCB 1 Class 1 Mode Register Format For Non-Public Key Algorithms"
hexmask.long.byte 0x00 16.--23. 1. "ALG,Algorithm selection"
bitfld.long 0x00 13. "C2K,Class 2 key" "Class 1,Class 2"
hexmask.long.word 0x00 4.--12. 1. "AAI,Additional algorithm information"
newline
bitfld.long 0x00 2.--3. "AS,Algorithm state" "Updated,Initialized,Finalized,Initialized/Finalized"
bitfld.long 0x00 1. "ICV_TEST,ICV checking/test AES fault detection" "No,Yes"
bitfld.long 0x00 0. "ENC,Encryption or decryption" "Decrypt,Encrypt"
endif
group.long (0x90004+0x08)++0x03
line.long 0x00 "C1C1KSR,CCB 1 Class 1 Key Size Register"
hexmask.long.byte 0x00 0.--6. 1. "C1KS,Class 1 key size in bytes"
group.quad (0x90004+0x0C)++0x07
line.quad 0x00 "C1C1DSR,CCB 1 Class 1 Data Size Register"
rbitfld.quad 0x00 61.--63. "NUMBITS,Class 1 data size number of bits" "0,1,2,3,4,5,6,7"
rbitfld.quad 0x00 32. "C1CY,Class 1 data size carry" "No carry,Carry"
hexmask.quad.long 0x00 0.--31. 1. "C1DS,Class 1 data size"
group.long (0x90004+0x18)++0x03
line.long 0x00 "C1C1ICVSR,CCB 1 Class 1 ICV Size Register"
bitfld.long 0x00 0.--4. "C1ICVS,Class 1 ICV size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
wgroup.long (0x90004+0x30)++0x03
line.long 0x00 "C1CCTRL,CCB 1 CHA Control Register"
bitfld.long 0x00 27. "UB,Unload the PKHA B memory" "No effect,Unload"
bitfld.long 0x00 26. "UA,Unload the PKHA A memory" "No effect,Unload"
bitfld.long 0x00 24. "UN,Unload the PKHA N memory" "No effect,Unload"
newline
bitfld.long 0x00 23. "UB3,Unload the PKHA B3 memory" "No effect,Unload"
bitfld.long 0x00 22. "UB2,Unload the PKHA B2 memory" "No effect,Unload"
bitfld.long 0x00 21. "UB1,Unload the PKHA B1 memory" "No effect,Unload"
newline
bitfld.long 0x00 20. "UB0,Unload the PKHA B0 memory" "No effect,Unload"
bitfld.long 0x00 19. "UA3,Unload the PKHA A3 memory" "No effect,Unload"
bitfld.long 0x00 18. "UA2,Unload the PKHA A2 memory" "No effect,Unload"
newline
bitfld.long 0x00 17. "UA1,Unload the PKHA A1 memory" "No effect,Unload"
bitfld.long 0x00 16. "UA0,Unload the PKHA A0 memory" "No effect,Unload"
bitfld.long 0x00 13. "AES_C2,Reset AES class 2 CHA" "No effect,Reset"
newline
bitfld.long 0x00 12. "ZUCA,Reset ZUC authentication accelerator" "No effect,Reset"
bitfld.long 0x00 11. "ZUCE,Reset ZUC encryption accelerator" "No effect,Reset"
bitfld.long 0x00 10. "SNF9,Reset SNOW f9 hardware accelerator" "No effect,Reset"
newline
bitfld.long 0x00 9. "RNG,Reset random number generator" "No effect,Reset"
bitfld.long 0x00 8. "CRC,Reset CRC accelerator" "No effect,Reset"
bitfld.long 0x00 7. "MD,Reset message digest hardware accelerator" "No effect,Reset"
newline
bitfld.long 0x00 6. "PK,Reset public key hardware accelerator" "No effect,Reset"
bitfld.long 0x00 5. "SNF8,Reset SNOW f8 hardware accelerator" "No effect,Reset"
bitfld.long 0x00 4. "KAS,Reset kasumi f8/f9 hardware accelerator" "No effect,Reset"
newline
bitfld.long 0x00 2. "DES,Reset DES accelerator" "No effect,Reset"
bitfld.long 0x00 1. "AES,Reset AES accelerator" "No effect,Reset"
bitfld.long 0x00 0. "CCB,Reset CCB" "No effect,Reset"
group.long (0x90004+0x38)++0x03
line.long 0x00 "C1ICTL,CCB 1 Interrupt Control Register"
rbitfld.long 0x00 29. "ASEI,AES sec error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 28. "ZAEI,ZUCA error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 27. "ZEEI,ZUCE error interrupt detection" "Not detected,Detected"
newline
rbitfld.long 0x00 26. "S9EI,SNOW-f9 error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 25. "RNEI,RNG error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 24. "CEI,CRC error interrupt detection" "Not detected,Detected"
newline
rbitfld.long 0x00 23. "MEI,Hashing error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 22. "PEI,Public Key error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 21. "S8EI,SNOW-f8 error interrupt detection" "Not detected,Detected"
newline
rbitfld.long 0x00 20. "KEI,KFHA error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 18. "DEI,DESA error interrupt detection" "Not detected,Detected"
rbitfld.long 0x00 17. "AEI,AESA error interrupt detection" "Not detected,Detected"
newline
eventfld.long 0x00 13. "ASDI,AES sec done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 12. "ZADI,ZUCA done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 11. "ZEDI,ZUCE done interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x00 10. "S9DI,SNOW-f9 done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 9. "RNDI,RNG done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 8. "CDI,CRCA done interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x00 7. "MDI,MDHA hashing done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 6. "PDI,PKHA done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 5. "S8DI,SNOW-f8 done interrupt" "No interrupt,Interrupt"
newline
eventfld.long 0x00 4. "KDI,KFHA done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 2. "DDI,DESA done interrupt" "No interrupt,Interrupt"
eventfld.long 0x00 1. "ADI,AESA done interrupt" "No interrupt,Interrupt"
wgroup.long (0x90004+0x40)++0x03
line.long 0x00 "C1CWR,CCB 1 Clear Written Register"
bitfld.long 0x00 31. "CIF,Clear input FIFO (and NFIFO)" "No effect,Cleared"
bitfld.long 0x00 30. "COF,Clear output FIFO" "No effect,Cleared"
bitfld.long 0x00 29. "C1RST,Reset class 1 CHA" "No effect,Reset"
newline
bitfld.long 0x00 28. "C2RST,Reset class 2 CHA" "No effect,Reset"
bitfld.long 0x00 27. "C1D,Clear class 1 done interrupt" "No effect,Cleared"
bitfld.long 0x00 26. "C2D,Clear class 2 done interrupt" "No effect,Cleared"
newline
bitfld.long 0x00 25. "CDS,Clear descriptor sharing signal" "No effect,Cleared"
bitfld.long 0x00 22. "C2K,Clear the class 2 key register" "No effect,Cleared"
bitfld.long 0x00 21. "C2C,Clear the class 2 context register" "No effect,Cleared"
newline
bitfld.long 0x00 18. "C2DS,Clear the class 2 data size registers" "No effect,Cleared"
bitfld.long 0x00 16. "C2M,Clear the class 2 mode register" "No effect,Cleared"
bitfld.long 0x00 15. "CPKE,Clear the PKHA A size register" "No effect,Cleared"
newline
bitfld.long 0x00 14. "CPKN,Clear the PKHA N size register" "No effect,Cleared"
bitfld.long 0x00 13. "CPKB,Clear the PKHA B size register" "No effect,Cleared"
bitfld.long 0x00 12. "CPKA,Clear the PKHA E size register" "No effect,Cleared"
newline
bitfld.long 0x00 6. "C1K,Clear the class 1 key register" "No effect,Cleared"
bitfld.long 0x00 5. "C1C,Clear the class 1 context register" "No effect,Cleared"
bitfld.long 0x00 3. "C1ICV,Clear the class 1 ICV size register" "No effect,Cleared"
newline
bitfld.long 0x00 2. "C1DS,Clear the class 1 data size register" "No effect,Cleared"
bitfld.long 0x00 0. "C1M,Clear the class 1 mode register" "No effect,Cleared"
rgroup.long (0x90004+0x44)++0x07
line.long 0x00 "C1CSTA_MS,CCB 1 Status And Error Register (Most Significant)"
bitfld.long 0x00 28.--31. "CL2,Class 2 algorithms" ",,,,MD5/SHA,,,,,CRC,SNOW f9,,ZUC authentication,?..."
bitfld.long 0x00 16.--19. "ERRID2,Error ID 2" ",Mode,Data size,Key size,,,Data arrived out of sequence,,,,ICV check failed,Internal hardware failure,,,Invalid CHA combination,Invalid CHA"
bitfld.long 0x00 12.--15. "CL1,Class 1 algorithms" ",AES,DES,,,RNG,SNOW,Kasumi,Public key,,,ZUC encryption,?..."
newline
bitfld.long 0x00 0.--3. "ERRID1,Error ID 1" ",Mode,Data size,Key size,PKHA A memory size,PKHA B memory size,Data arrived out of sequence,PKHA divide by zero,PKHA modulus even,DES key parity,ICV check failed,Internal hardware failure,CCM AAD size,Class 1 CHA not reset,Invalid CHA combination,Invalid CHA"
line.long 0x04 "C1CSTA_LS,CCB 1 Status And Error Register (Least-Significant)"
bitfld.long 0x04 30. "PIZ,Public key operation is zero" "Not zero,Zero"
bitfld.long 0x04 29. "GCD,Greates common divisor is one" "Not one,One"
bitfld.long 0x04 28. "PRM,Public key is prime" "Not prime,Prime"
newline
bitfld.long 0x04 21. "SEI,Class 2 error interrupt" "No interrupt,Interrupt"
bitfld.long 0x04 20. "PEI,Class 1 error interrupt" "No interrupt,Interrupt"
bitfld.long 0x04 17. "SDI,Class 2 done interrupt" "No interrupt,Interrupt"
newline
bitfld.long 0x04 16. "PDI,Class 1 done interrupt" "No interrupt,Interrupt"
bitfld.long 0x04 12. "ZAB,ZUCA block busy" "Idle,Busy"
bitfld.long 0x04 11. "ZEB,ZUCE block busy" "Idle,Busy"
newline
bitfld.long 0x04 10. "S9B,SNOW f9 busy" "Idle,Busy"
bitfld.long 0x04 9. "RNB,RNG block busy" "Idle,Busy"
bitfld.long 0x04 8. "CB,CRC block busy" "Idle,Busy"
newline
bitfld.long 0x04 7. "MB,MDHA busy" "Idle,Busy"
bitfld.long 0x04 6. "PB,PKHA busy" "Idle,Busy"
bitfld.long 0x04 5. "S8B,SNOW f8" "Idle,Busy"
newline
bitfld.long 0x04 4. "KB,KFHA busy" "Idle,Busy"
bitfld.long 0x04 2. "DB,DESA busy" "Idle,Busy"
bitfld.long 0x04 1. "AB,AESA busy" "Idle,Busy"
group.long (0x90004+0x58)++0x03
line.long 0x00 "C1C1AADSZR,CCB 1 AAD Size Register"
bitfld.long 0x00 0.--3. "AASZ,AAD size in bytes mod 16" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x90004+0x60)++0x03
line.long 0x00 "C1C1IVSZR,CCB 1 Class 1 IV Size Register"
bitfld.long 0x00 0.--3. "IVSZ,IV size in bytes mod 16" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
group.long (0x90004+0x80)++0x03
line.long 0x00 "C1PKASZR,PKHA A Size Register 1"
hexmask.long.word 0x00 0.--9. 1. "PKASZ,PKHA A memory key size in bytes"
group.long (0x90004+0x88)++0x03
line.long 0x00 "C1PKBSZR,PKHA B Size Register 1"
hexmask.long.word 0x00 0.--9. 1. "PKBSZ,PKHA B memory key size in bytes"
group.long (0x90004+0x90)++0x03
line.long 0x00 "C1PKNSZR,PKHA N Size Register 1"
hexmask.long.word 0x00 0.--9. 1. "PKNSZ,PKHA N memory key size in bytes"
group.long (0x90004+0x98)++0x03
line.long 0x00 "C1PKESZR,PKHA E Size Register 1"
hexmask.long.word 0x00 0.--9. 1. "PKESZ,PKHA E memory key size in bytes"
tree.end
tree "CCB Class 1 Context Registers"
repeat 2. (increment 0x80100 0x10000)(increment 0 1)
group.long $1++0x3F
line.long 0x00 "C$2C1CTXR0,CCB $2 Class 1 Context Register Word 0"
line.long 0x04 "C$2C1CTXR1,CCB $2 Class 1 Context Register Word 1"
line.long 0x08 "C$2C1CTXR2,CCB $2 Class 1 Context Register Word 2"
line.long 0x0C "C$2C1CTXR3,CCB $2 Class 1 Context Register Word 3"
line.long 0x10 "C$2C1CTXR4,CCB $2 Class 1 Context Register Word 4"
line.long 0x14 "C$2C1CTXR5,CCB $2 Class 1 Context Register Word 5"
line.long 0x18 "C$2C1CTXR6,CCB $2 Class 1 Context Register Word 6"
line.long 0x1C "C$2C1CTXR7,CCB $2 Class 1 Context Register Word 7"
line.long 0x20 "C$2C1CTXR8,CCB $2 Class 1 Context Register Word 8"
line.long 0x24 "C$2C1CTXR9,CCB $2 Class 1 Context Register Word 9"
line.long 0x28 "C$2C1CTXR10,CCB $2 Class 1 Context Register Word 10"
line.long 0x2C "C$2C1CTXR11,CCB $2 Class 1 Context Register Word 11"
line.long 0x30 "C$2C1CTXR12,CCB $2 Class 1 Context Register Word 12"
line.long 0x34 "C$2C1CTXR13,CCB $2 Class 1 Context Register Word 13"
line.long 0x38 "C$2C1CTXR14,CCB $2 Class 1 Context Register Word 14"
line.long 0x3C "C$2C1CTXR15,CCB $2 Class 1 Context Register Word 15"
repeat.end
tree.end
tree "CCB Class 1 Key Registers"
repeat 2. (increment 0x80200 0x10000)(increment 0 1)
group.long $1++0x1F
line.long 0x00 "C$2C1KR0,CCB $2 Class 1 Key Register Word 0"
line.long 0x04 "C$2C1KR1,CCB $2 Class 1 Key Register Word 1"
line.long 0x08 "C$2C1KR2,CCB $2 Class 1 Key Register Word 2"
line.long 0x0C "C$2C1KR3,CCB $2 Class 1 Key Register Word 3"
line.long 0x10 "C$2C1KR4,CCB $2 Class 1 Key Register Word 4"
line.long 0x14 "C$2C1KR5,CCB $2 Class 1 Key Register Word 5"
line.long 0x18 "C$2C1KR6,CCB $2 Class 1 Key Register Word 6"
line.long 0x1C "C$2C1KR7,CCB $2 Class 1 Key Register Word 7"
repeat.end
tree.end
tree "CCB Class 2 Mode And Size Registers"
repeat 2. (increment 0x80404 0x10000)(increment 0 1)
group.long $1++0x03
line.long 0x00 "C$2C2MR,CCB $2 Class 2 Mode Register"
hexmask.long.byte 0x00 16.--23. 1. "ALG,Algorithm"
hexmask.long.word 0x00 4.--12. 1. "AAI,Additional algorithm information"
bitfld.long 0x00 2.--3. "AS,Algorithm state" "Updated,Initialized,Finalized,Initialized/Finalized"
newline
bitfld.long 0x00 1. "ICV,ICV checking" "Not compared,Compared"
bitfld.long 0x00 0. "AP,Authenticate or protect" "Authenticated,Protected"
group.long ($1+0x08)++0x03
line.long 0x00 "C$2C2KSR,CCB $2 Class 2 Key Size Register"
hexmask.long.byte 0x00 0.--7. 1. "C2KS,Class 2 key size in bytes"
group.quad ($1+0x0C)++0x07
line.quad 0x00 "C$2C2DSR,CCB $2 Class 2 Data Size Register"
rbitfld.quad 0x00 61.--63. "NUMBITS,Class 2 data size number of bits" "0,1,2,3,4,5,6,7"
rbitfld.quad 0x00 32. "C2CY,Class 2 data size carry" "No carry,Carry"
hexmask.quad.long 0x00 0.--31. 1. "C2DS,Class 2 data size"
group.long ($1+0x18)++0x03
line.long 0x00 "C$2C2ICVSZR,CCB $2 Class 2 ICV Size (mod 8) In Bytes"
bitfld.long 0x00 0.--3. "ICVSZ,Class 2 ICV size in bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
tree.end
tree "CCB Class 2 Context Registers"
repeat 2. (increment 0x80500 0x10000)(increment 0 1)
group.long $1++0x47
line.long 0x00 "C$2C2CTXR0,CCB $2 Class 2 Context Register Word 0"
line.long 0x04 "C$2C2CTXR1,CCB $2 Class 2 Context Register Word 1"
line.long 0x08 "C$2C2CTXR2,CCB $2 Class 2 Context Register Word 2"
line.long 0x0C "C$2C2CTXR3,CCB $2 Class 2 Context Register Word 3"
line.long 0x10 "C$2C2CTXR4,CCB $2 Class 2 Context Register Word 4"
line.long 0x14 "C$2C2CTXR5,CCB $2 Class 2 Context Register Word 5"
line.long 0x18 "C$2C2CTXR6,CCB $2 Class 2 Context Register Word 6"
line.long 0x1C "C$2C2CTXR7,CCB $2 Class 2 Context Register Word 7"
line.long 0x20 "C$2C2CTXR8,CCB $2 Class 2 Context Register Word 8"
line.long 0x24 "C$2C2CTXR9,CCB $2 Class 2 Context Register Word 9"
line.long 0x28 "C$2C2CTXR10,CCB $2 Class 2 Context Register Word 10"
line.long 0x2C "C$2C2CTXR11,CCB $2 Class 2 Context Register Word 11"
line.long 0x30 "C$2C2CTXR12,CCB $2 Class 2 Context Register Word 12"
line.long 0x34 "C$2C2CTXR13,CCB $2 Class 2 Context Register Word 13"
line.long 0x38 "C$2C2CTXR14,CCB $2 Class 2 Context Register Word 14"
line.long 0x3C "C$2C2CTXR15,CCB $2 Class 2 Context Register Word 15"
line.long 0x40 "C$2C2CTXR16,CCB $2 Class 2 Context Register Word 16"
line.long 0x44 "C$2C2CTXR17,CCB $2 Class 2 Context Register Word 17"
repeat.end
tree.end
tree "CCB Class 2 Key Registers"
repeat 2. (increment 0x80600 0x10000)(increment 0 1)
group.long $1++0x7F
line.long 0x00 "C$2C2KEYR0,CCB $2 Class 2 Key Register Word 0"
line.long 0x04 "C$2C2KEYR1,CCB $2 Class 2 Key Register Word 1"
line.long 0x08 "C$2C2KEYR2,CCB $2 Class 2 Key Register Word 2"
line.long 0x0C "C$2C2KEYR3,CCB $2 Class 2 Key Register Word 3"
line.long 0x10 "C$2C2KEYR4,CCB $2 Class 2 Key Register Word 4"
line.long 0x14 "C$2C2KEYR5,CCB $2 Class 2 Key Register Word 5"
line.long 0x18 "C$2C2KEYR6,CCB $2 Class 2 Key Register Word 6"
line.long 0x1C "C$2C2KEYR7,CCB $2 Class 2 Key Register Word 7"
line.long 0x20 "C$2C2KEYR8,CCB $2 Class 2 Key Register Word 8"
line.long 0x24 "C$2C2KEYR9,CCB $2 Class 2 Key Register Word 9"
line.long 0x28 "C$2C2KEYR10,CCB $2 Class 2 Key Register Word 10"
line.long 0x2C "C$2C2KEYR11,CCB $2 Class 2 Key Register Word 11"
line.long 0x30 "C$2C2KEYR12,CCB $2 Class 2 Key Register Word 12"
line.long 0x34 "C$2C2KEYR13,CCB $2 Class 2 Key Register Word 13"
line.long 0x38 "C$2C2KEYR14,CCB $2 Class 2 Key Register Word 14"
line.long 0x3C "C$2C2KEYR15,CCB $2 Class 2 Key Register Word 15"
line.long 0x40 "C$2C2KEYR16,CCB $2 Class 2 Key Register Word 16"
line.long 0x44 "C$2C2KEYR17,CCB $2 Class 2 Key Register Word 17"
line.long 0x48 "C$2C2KEYR18,CCB $2 Class 2 Key Register Word 18"
line.long 0x4C "C$2C2KEYR19,CCB $2 Class 2 Key Register Word 19"
line.long 0x50 "C$2C2KEYR20,CCB $2 Class 2 Key Register Word 20"
line.long 0x54 "C$2C2KEYR21,CCB $2 Class 2 Key Register Word 21"
line.long 0x58 "C$2C2KEYR22,CCB $2 Class 2 Key Register Word 22"
line.long 0x5C "C$2C2KEYR23,CCB $2 Class 2 Key Register Word 23"
line.long 0x60 "C$2C2KEYR24,CCB $2 Class 2 Key Register Word 24"
line.long 0x64 "C$2C2KEYR25,CCB $2 Class 2 Key Register Word 25"
line.long 0x68 "C$2C2KEYR26,CCB $2 Class 2 Key Register Word 26"
line.long 0x6C "C$2C2KEYR27,CCB $2 Class 2 Key Register Word 27"
line.long 0x70 "C$2C2KEYR28,CCB $2 Class 2 Key Register Word 28"
line.long 0x74 "C$2C2KEYR29,CCB $2 Class 2 Key Register Word 29"
line.long 0x78 "C$2C2KEYR30,CCB $2 Class 2 Key Register Word 30"
line.long 0x7C "C$2C2KEYR31,CCB $2 Class 2 Key Register Word 31"
repeat.end
tree.end
tree "FIFO/DECO Registers"
repeat 2. (increment 0x807C0 0x10000)(increment 0 1)
rgroup.long $1++0x03
line.long 0x00 "C$2FIFOSTA,CCB $2 FIFO Status"
hexmask.long.byte 0x00 24.--31. 1. "C1IQHEAD,Current head of the class 1 alignment block queue located within the input data FIFO"
hexmask.long.byte 0x00 16.--23. 1. "C2IQHEAD,Current head of the class 2 alignment block queue located within the input data FIFO"
hexmask.long.byte 0x00 8.--15. 1. "DMAOQHEAD,Current head of the DMA queue located within the output data FIFO"
newline
hexmask.long.byte 0x00 0.--7. 1. "DECOOQHEAD,Current head of the DECO alignment block queue located within the output data FIFO"
wgroup.long ($1+0x10)++0x03
line.long 0x00 "C$2NFIFO_2,CCB $2 Information FIFO"
bitfld.long 0x00 30.--31. "DEST,Destination" "DECO alignment block,Class 1,Class 2,Both classes"
bitfld.long 0x00 29. "LC2,Last class 2" "Not last,Last"
bitfld.long 0x00 28. "LC1,Last class 1" "Not last,Last"
newline
bitfld.long 0x00 27. "FC2,Flush class 2" "No flush,Flush"
bitfld.long 0x00 26. "FC1,Flush class 1" "No flush,Flush"
bitfld.long 0x00 24.--25. "STYPE,Source type of the data for the alignment block (AST=0/AST=1)" ",,Padding block,"
newline
bitfld.long 0x00 20.--23. "DTYPE,Data type [PKHA/Other CHAs]" "PKHA A0/-,PKHA A1/ADD,PKHA A2/IV,PKHA A3/SAD,PKHA B0/-,PKHA B1/-,PKHA B2/-,PKHA B3/-,PKHA N/-,PKHA E/-,-/ICV,,PKHA A/-,PKHA B/-,-/DECO ignore,-/Message data"
bitfld.long 0x00 19. "BND,Boundary padding" "Disabled,Enabled"
bitfld.long 0x00 16.--18. "PTYPE,Pad type" "All 0,Random non-0,Incremented,Random,All 0 + num,Random non-0 + 0,N-1,Random non-0 + N"
newline
bitfld.long 0x00 15. "PR,Prediction resistance" "Disabled,Enabled"
bitfld.long 0x00 11. "BM,Boundary minus 1" "Disabled,Enabled"
bitfld.long 0x00 10. "PS,Pad snoop" "Disabled,Enabled"
newline
hexmask.long.byte 0x00 0.--6. 1. "PL,Pad length"
wgroup.long ($1+0x10)++0x03
line.long 0x00 "C$2NFIFO,CCB $2 Information FIFO"
bitfld.long 0x00 30.--31. "DEST,Destination" "DECO alignment block,Class 1,Class 2,Both Classes"
bitfld.long 0x00 29. "LC2,Last class 2" "Not last,Last"
bitfld.long 0x00 28. "LC1,Last class 1" "Not last,Last"
newline
bitfld.long 0x00 27. "FC2,Flush class 2" "No flush,Flush"
bitfld.long 0x00 26. "FC1,Flush class 1" "No flush,Flush"
bitfld.long 0x00 24.--25. "STYPE,Source type of the data for the alignment block (AST=0/AST=1)" "Input/Aux,Output/-,,Outsnooping"
newline
bitfld.long 0x00 20.--23. "DTYPE,Data type [PKHA/Other CHAs]" "PKHA A0/-,PKHA A1/ADD,PKHA A2/IV,PKHA A3/SAD,PKHA B0/-,PKHA B1/-,PKHA B2/-,PKHA B3/-,PKHA N/-,PKHA E/-,-/ICV,,PKHA A/-,PKHA B/-,-/DECO ignore,-/Message data"
bitfld.long 0x00 19. "BND,Boundary padding" "Disabled,Enabled"
bitfld.long 0x00 16.--18. "PTYPE,Pad type" "All 0,Random non-0,Incremented,Random,All 0 + num,Random non-0 + 0,N-1,Random non-0 + N"
newline
bitfld.long 0x00 15. "OC,OFIFO continuation" "Disabled,Enabled"
bitfld.long 0x00 14. "AST,Additional source types" "0,1"
hexmask.long.word 0x00 0.--11. 1. "DL,Data length"
wgroup.long ($1+0x20)++0x03
line.long 0x00 "C$2IFIFO,CCB $2 Input Data FIFO"
hgroup.quad ($1+0x30)++0x07
hide.quad 0x00 "C$2OFIFO,CCB $2 Output Data FIFO"
in
newline
group.long ($1+0x40)++0x03
line.long 0x00 "D$2JQCR_MS,DECO$2 Job Queue Control Register (Most Significant)"
bitfld.long 0x00 31. "STEP,Step" "No effect,Step"
bitfld.long 0x00 30. "SING,Single step mode" "Disabled,Enabled"
bitfld.long 0x00 29. "WHL,Whole descriptor" "Not occurred,Occurred"
newline
bitfld.long 0x00 28. "FOUR,Four words" "Less,At least"
bitfld.long 0x00 27. "ILE,Immediate little endian" "Not swapped,Swapped"
bitfld.long 0x00 24.--26. "SHR_FROM,Share from" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 19. "DWS,Double word swap" "Not swapped,Swapped"
bitfld.long 0x00 16. "SOB,Shared descriptor or input frame burst" "Not passed,Passed"
rbitfld.long 0x00 15. "AMTD,Allow make trusted descriptor" "Not allowed,Allowed"
newline
rbitfld.long 0x00 8.--10. "SRC,Job source" "Job ring 0,Job ring 1,Job ring 2,Job ring 3,RTIC,?..."
bitfld.long 0x00 0.--3. "ID,Job ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
rgroup.long ($1+0x44)++0x03
line.long 0x00 "D$2JQCR_LS,DECO$2 Job Queue Control Register (Least Significant)"
rgroup.quad ($1+0x48)++0x07
line.quad 0x00 "D$2DAR,DECO$2 Descriptor Address Register"
hexmask.quad 0x00 0.--48. 0x01 "DPTR,Descriptor pointer"
rgroup.long ($1+0x50)++0x07
line.long 0x00 "D$2OPSTA_MS,DECO$2 Operation Status Register (Most Significant)"
bitfld.long 0x00 28.--31. "STATUS_TYPE,Status type" "No error,DMA error,CCB error,Jump halt user status,DECO error,,,Jump halt condition code,?..."
bitfld.long 0x00 27. "NLJ,Non-local jump" "Not occurred,Occurred"
hexmask.long.byte 0x00 8.--14. 1. "COMMAND_INDEX,Command index"
newline
hexmask.long.byte 0x00 0.--7. 1. "STATUS,Error status"
line.long 0x04 "D$2OPSTA_LS,DECO$2 Operation Status Register (Least Significant)"
group.long ($1+0x58)++0x03
line.long 0x00 "D$2CKSUMR,DECO$2 Checksum Register"
hexmask.long.word 0x00 0.--15. 1. "CKSUM,Checksum"
rgroup.long ($1+0x60)++0x07
line.long 0x00 "D$2C0ICIDSR,DECO$2 Control And Output ICID Status Register"
bitfld.long 0x00 31. "CPL,Control privilege level" "Not asserted,Asserted"
hexmask.long.byte 0x00 16.--22. 1. "CICID,Control ICID. ICID value used by the DMA when processing control operations during execution"
bitfld.long 0x00 15. "OPL,Output privilege level" "Not asserted,Asserted"
newline
hexmask.long.byte 0x00 0.--6. 1. "OICID,Output ICID. ICID value used by the DMA when processing output operations during execution"
line.long 0x04 "D$2ISR,DECO$2 SDID And Input ICID Status Register"
bitfld.long 0x04 31. "TZ,TrustZone value" "NonSecureWorld,SecureWorld"
hexmask.long.word 0x04 16.--27. 1. "SDID,Security domain identifier"
bitfld.long 0x04 15. "IPL,Input privilege level" "Not asserted,Asserted"
newline
hexmask.long.byte 0x04 0.--6. 1. "IICID,ICID value. ICID value used by the DMA when processing input operations during execution"
repeat.end
tree.end
tree "DECO Math Registers"
repeat 2. (increment 0x80840 0x10000)(increment 0 1)
tree "DECO$2"
group.long $1++0x3F
line.long 0x00 "D$2MTH0_MS,DECO$2 Math Register 0_MS"
line.long 0x04 "D$2MTH0_LS,DECO$2 Math Register 0_LS"
line.long 0x08 "D$2MTH1_MS,DECO$2 Math Register 1_MS"
line.long 0x0C "D$2MTH1_LS,DECO$2 Math Register 1_LS"
line.long 0x10 "D$2MTH2_MS,DECO$2 Math Register 2_MS"
line.long 0x14 "D$2MTH2_LS,DECO$2 Math Register 2_LS"
line.long 0x18 "D$2MTH3_MS,DECO$2 Math Register 3_MS"
line.long 0x1C "D$2MTH3_LS,DECO$2 Math Register 3_LS"
line.long 0x20 "D$2MTH4_MS,DECO$2 Math Register 4_MS"
line.long 0x24 "D$2MTH4_LS,DECO$2 Math Register 4_LS"
line.long 0x28 "D$2MTH5_MS,DECO$2 Math Register 5_MS"
line.long 0x2C "D$2MTH5_LS,DECO$2 Math Register 5_LS"
line.long 0x30 "D$2MTH6_MS,DECO$2 Math Register 6_MS"
line.long 0x34 "D$2MTH6_LS,DECO$2 Math Register 6_LS"
line.long 0x38 "D$2MTH7_MS,DECO$2 Math Register 7_MS"
line.long 0x3C "D$2MTH7_LS,DECO$2 Math Register 7_LS"
tree.end
repeat.end
tree.end
tree "DECO Gather Table Registers"
repeat 2. (increment 0x80880 0x10000)(increment 0 1)
group.quad $1++0x3F
line.quad 0x00 "D$2GTR0_L,DECO$2 Gather Table Register 0 Low"
line.quad 0x08 "D$2GTR0_H,DECO$2 Gather Table Register 0 High"
line.quad 0x10 "D$2GTR1_L,DECO$2 Gather Table Register 1 Low"
line.quad 0x18 "D$2GTR1_H,DECO$2 Gather Table Register 1 High"
line.quad 0x20 "D$2GTR2_L,DECO$2 Gather Table Register 2 Low"
line.quad 0x28 "D$2GTR2_H,DECO$2 Gather Table Register 2 High"
line.quad 0x30 "D$2GTR3_L,DECO$2 Gather Table Register 3 Low"
line.quad 0x38 "D$2GTR3_H,DECO$2 Gather Table Register 3 High"
repeat.end
tree.end
tree "DECO Scatter Table Registers"
repeat 2. (increment 0x80900 0x10000)(increment 0 1)
group.quad $1++0x3F
line.quad 0x00 "D$2STR0_L,DECO$2 Scatter Table Register 0 Low"
line.quad 0x08 "D$2STR0_H,DECO$2 Scatter Table Register 0 High"
line.quad 0x10 "D$2STR1_L,DECO$2 Scatter Table Register 1 Low"
line.quad 0x18 "D$2STR1_H,DECO$2 Scatter Table Register 1 High"
line.quad 0x20 "D$2STR2_H,DECO$2 Scatter Table Register 2 Low"
line.quad 0x28 "D$2STR2_L,DECO$2 Scatter Table Register 2 High"
line.quad 0x30 "D$2STR3_L,DECO$2 Scatter Table Register 3 Low"
line.quad 0x38 "D$2STR3_H,DECO$2 Scatter Table Register 3 High"
repeat.end
tree.end
tree "DECO Descriptor Buffer Word Registers"
tree "DECO0"
repeat 64. (increment 0x80A00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "D0DESB$2,DECO$2 Descriptor Buffer Word $2 Register"
repeat.end
tree.end
tree "DECO1"
repeat 64. (increment 0x90A00 0x04)(increment 0 1)
group.long $1++0x03
line.long 0x00 "D1DESB$2,DECO$2 Descriptor Buffer Word $2 Register"
repeat.end
tree.end
tree.end
newline
repeat 2. (increment 0x80E00 0x10000)(increment 0 1)
rgroup.long $1++0x07
line.long 0x00 "D$2DJR,DECO$2 Debug Job"
bitfld.long 0x00 31. "STEP,Step execution" "Not executed,Executed"
bitfld.long 0x00 30. "SING,Single step mode" "Disabled,Enabled"
bitfld.long 0x00 29. "WHL,Whole descriptor" "Not occurred,Occurred"
newline
bitfld.long 0x00 28. "FOUR,Four words" "Less,At least"
bitfld.long 0x00 27. "ILE,Immediate little endian" "Not swapped,Swapped"
bitfld.long 0x00 24.--26. "SHR_FROM,Share from" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 19. "DWS,Double word swap" "Not swapped,Swapped"
bitfld.long 0x00 16. "GSD,Shared descriptor obtain" "Not obtained,Obtained"
bitfld.long 0x00 15. "AMTD,Allow make trusted descriptor" "Not allowed,Allowed"
newline
bitfld.long 0x00 14. "JDIS,Job descriptor ICID select" "Non-SEQ,SEQ"
bitfld.long 0x00 8.--10. "SRC,Job source" "Job ring 0,Job ring 1,Job ring 2,Job ring 3,RTIC,?..."
bitfld.long 0x00 0.--3. "ID,Job ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
line.long 0x04 "D$2DDR,DECO$2 Debug DECO"
bitfld.long 0x04 31. "VALID,Valid" "Not valid,Valid"
bitfld.long 0x04 30. "SD,Shared descriptor" "Not received,Received"
bitfld.long 0x04 15. "PTCL_RUN,Protocol running" "Not running,Running"
newline
bitfld.long 0x04 14. "NLJ,Took non-local JUMP" "Not occurred,Occurred"
bitfld.long 0x04 3. "NC,No command. DECO is not currently executing a command" "No,Yes"
newline
bitfld.long 0x04 2. "BWB,Burster write busy" "Idle,Busy"
bitfld.long 0x04 1. "BRB,Burster read busy" "Idle,Busy"
bitfld.long 0x04 0. "CT,Checking trusted" "Not trusted,Trusted"
rgroup.quad ($1+0x08)++0x0F
line.quad 0x00 "D$2DJP,DECO$2 Debug Job Pointer"
hexmask.quad 0x00 0.--48. 0x01 "JDPTR,Job descriptor pointer"
line.quad 0x08 "D$2SDP,DECO$2 Debug Shared Pointer"
hexmask.quad 0x08 0.--48. 0x01 "SDPTR,Shared descriptor pointer"
rgroup.long ($1+0x18)++0x07
line.long 0x00 "D$2DIR_MS,DECO$2 Debug_ICID (Most Significant) Register"
bitfld.long 0x00 31. "DCPL,DECO control privilege level" "0,1"
hexmask.long.byte 0x00 16.--22. 1. "CICID,DECO control ICID"
bitfld.long 0x00 15. "DOPL,DECO output privilege level" "0,1"
newline
hexmask.long.byte 0x00 0.--6. 1. "OICID,DECO output ICID"
line.long 0x04 "D$2DIR_LS,DECO$2 Debug_ICID (Least Significant) Register"
bitfld.long 0x04 31. "TZ,DECO TrustZone" "Non-secure,Secure"
hexmask.long.word 0x04 16.--27. 1. "SDID,DECO SDID value"
bitfld.long 0x04 15. "DIPL,DECO input privilege level" "0,1"
newline
hexmask.long.byte 0x04 0.--6. 1. "IICID,DECO input ICID value"
group.long ($1+0x20)++0x1B
line.long 0x00 "SOL$2,Sequence Output Length Register $2"
line.long 0x04 "VSOL$2,Variable Sequence Output Length Register $2"
line.long 0x08 "SIL$2,Sequence Input Length Register $2"
line.long 0x0C "VSIL$2,Variable Sequence Input Length Register $2"
line.long 0x10 "D$2POVRD,Protocol Override Register $2"
line.long 0x14 "UVSOL$2,Variable Sequence Output Length Register $2 Upper 32 Bits"
line.long 0x18 "UVSIL$2,Variable Sequence Input Length Register $2 Upper 32 Bits"
rgroup.long ($1+0x3C)++0x07
line.long 0x00 "D$2DER,DECO$2 Debug Execution Register"
bitfld.long 0x00 24.--27. "TRCT,DMA transaction count" "0,1,2,3,4,?..."
bitfld.long 0x00 16.--19. "DECO_STATE,DECO state" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x00 9.--11. "CMD_STAGE,Command stage" "0,1,2,3,4,5,6,7"
newline
bitfld.long 0x00 8. "CSA,Command stage aux" "0,1"
hexmask.long.byte 0x00 0.--7. 1. "CMD_INDEX,Command index"
line.long 0x04 "D$2DPR,DECO$2 Debug PDB Register"
bitfld.long 0x04 8.--11. "PDB_WB_ST,PDB writeback state" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
bitfld.long 0x04 0.--3. "PDB_STALL,PDB stall state" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
repeat.end
tree.end
autoindent.off
newline