; -------------------------------------------------------------------------------- ; @Title: CycloneVSOC On-Chip Peripherals ; @Props: Released ; @Author: BUJ ; @Changelog: ; 2013-03-27 BUJ ; 2013-09-04 BUJ ; @Manufacturer: ALTERA - Altera Corporation ; @Doc: 201211_cv_5v4_Hard_Processor_System.pdf (2012-11, v1.3); hps.html ; hps_new.html ; @Core: Cortex-A9MPCore ; @Chip: CYCLONEVSOC ; @Copyright: (C) 1989-2017 Lauterbach GmbH, licensed for use with TRACE32(R) only ; -------------------------------------------------------------------------------- ; $Id: percyclonevsoc.per 12606 2020-12-01 08:16:37Z pegold $ config 16. 8. width 0x0b tree "Core Registers (Cortex-A9MPCore)" width 0x8 ; -------------------------------------------------------------------------------- ; Identification registers ; -------------------------------------------------------------------------------- tree "ID Registers" rgroup.long c15:0x0++0x0 line.long 0x0 "MIDR,Main ID Register" hexmask.long.byte 0x0 24.--31. 0x1 " IMPL ,Implementer code" bitfld.long 0x0 20.--23. " VAR ,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0 16.--19. " ARCH , Architecture" "Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,ARMv7" textline " " hexmask.long.word 0x0 4.--15. 0x1 " PART ,Primary Part Number" bitfld.long 0x0 0.--3. " REV ,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long c15:0x100++0x0 line.long 0x0 "CTR,Cache Type Register" bitfld.long 0x0 29.--31. " FORMAT ,Format" "Not ARMv7,Not ARMv7,Not ARMv7,Not ARMv7,ARMv7,Not ARMv7,Not ARMv7,Not ARMv7" bitfld.long 0x0 24.--27. " CWG ,Cache Writeback Granule" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x0 20.--23. " ERG ,Exclusives Reservation Granule" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0 16.--19. " DMINLINE ,D-Cache Minimum Line Size" "1 word,2 words,4 words,8 words,16 words,32 words,64 words,128 words,256 words,512 words,1024 words,2048 words,4096 words,8192 words,16384 words,32768 words" textline " " bitfld.long 0x0 14.--15. " L1POLICY ,L1 Instruction cache policy" "Reserved,ASID,Virtual,Physical" bitfld.long 0x0 0.--3. " IMINLINE ,I-Cache Minimum Line Size" "1 word,2 words,4 words,8 words,16 words,32 words,64 words,128 words,256 words,512 words,1024 words,2048 words,4096 words,8192 words,16384 words,32768 words" rgroup.long c15:0x200++0x0 line.long 0x0 "TCMTR,Tighly-Coupled Memory Type Register" rgroup.long c15:0x300++0x0 line.long 0x0 "TLBTR,TLB Type Register" hexmask.long.byte 0x0 16.--23. 0x1 " ILSIZE ,Specifies the number of instruction TLB lockable entries" hexmask.long.byte 0x0 8.--15. 0x1 " DLSIZE ,Specifies the number of unified or data TLB lockable entries" bitfld.long 0x0 1. " TLB_size ,TLB Size" "64,128" textline " " bitfld.long 0x0 0. " nU ,Unified or Separate TLBs" "Unified,Separate" rgroup.long c15:0x500++0x0 line.long 0x0 "MPIDR,Multiprocessor Affinity Register" bitfld.long 0x00 30. " U ,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,Uniprocessor" bitfld.long 0x00 8.--11. " ClusterID ,Value read in CLUSTERID configuration pins" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--1. " CPUID ,Value depends on the number of configured CPUs" "0,1,2,3" rgroup.long c15:0x0410++0x00 line.long 0x00 "MMFR0,Memory Model Feature Register 0" bitfld.long 0x00 28.--31. " ISB ,Innermost shareability bits" "Non-cacheable,Hardware coherency,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Ignored" bitfld.long 0x00 24.--27. " FCSE ,Fast Context Switch Memory Mappings Support" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. " ARS ,Auxiliary Registers Support" "Not supported,Control only,Fault status and Control,?..." textline " " bitfld.long 0x00 16.--19. " TCM ,TCM and Associated DMA Support" "Not supported,IMPLEMENTATION DEFINED,?..." bitfld.long 0x00 12.--15. " SLS ,Shareability levels Support" "One level,Two levels,?..." bitfld.long 0x00 8.--11. " OSS ,Outermost shareability Support" "Non-cacheable,Supported,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Ignored" textline " " bitfld.long 0x00 4.--7. " PMSA ,Physical Memory System Architecture (PMSA) Support" "Not supported,IMPLEMENTATION DEFINED,PMSAv6,PMSAv7,?..." bitfld.long 0x00 0.--3. " VMSA ,Virtual Memory System Architecture (VMSA) Support" "Not supported,IMPLEMENTATION DEFINED,VMSAv6,VMSAv7,?..." rgroup.long c15:0x0510++0x00 line.long 0x00 "MMFR1,Memory Model Feature Register 1" bitfld.long 0x00 28.--31. " BTB ,Branch Predictor" "Disabled,Required,Required,Required,Not required,?..." bitfld.long 0x00 24.--27. " L1TCO ,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 20.--23. " L1UCMO ,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 16.--19. " L1HCMO ,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 12.--15. " L1UCLMOSW ,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. " L1HCLMOSW ,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 4.--7. " L1UCLMOMVA ,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 0.--3. " L1HCLMOMVA ,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..." rgroup.long c15:0x0610++0x00 line.long 0x00 "MMFR2,Memory Model Feature Register 2" bitfld.long 0x00 28.--31. " HAF ,Hardware Access Flag Support" "Not supported,Supported,?..." bitfld.long 0x00 24.--27. " WFI ,Wait for Interrupt Stalling Support" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. " MBF ,Memory Barrier Operations Support" "Not supported,Supported,Supported,?..." textline " " bitfld.long 0x00 16.--19. " UTLBMO ,TLB Maintenance Operations/Unified Architecture Support" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x00 12.--15. " HTLBMO ,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 8.--11. " HL1CMRO ,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " HL1BPCRO ,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,Supported,?..." bitfld.long 0x00 0.--3. " HL1FPCRO ,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,Supported,?..." rgroup.long c15:0x0710++0x00 line.long 0x00 "MMFR3,Memory Model Feature Register 3" bitfld.long 0x00 28.--31. " SS ,Supersection support" "Supported,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Not supported" bitfld.long 0x00 20.--23. " CW ,Coherent walk" "Supported,?..." bitfld.long 0x00 12.--15. " MB ,Invalidate broadcast Support" "Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 8.--11. " BPM ,Invalidate Branch predictor Support" "Not supported,Supported,?..." bitfld.long 0x00 4.--7. " HCMOSW ,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Not supported,Supported,?..." bitfld.long 0x00 0.--3. " HCMOMVA ,Invalidate Cache MVA Support" "Not supported,Supported,?..." rgroup.long c15:0x0020++0x00 line.long 0x00 "ISAR0,Instruction Set Attribute Register 0" bitfld.long 0x00 24.--27. " DIVI ,Divide Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. " DEBI ,Debug Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 16.--19. " CI ,Coprocessor Instructions Support" "Not supported,Supported,Supported,Supported,Supported,?..." textline " " bitfld.long 0x00 12.--15. " CBI ,Combined Compare and Branch Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 8.--11. " BI ,Bitfield Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 4.--7. " BCI ,Bit Counting Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 0.--3. " SI ,Swap Instructions Support" "Not supported,Supported,?..." rgroup.long c15:0x0120++0x00 line.long 0x00 "ISAR1,Instruction Set Attribute Register 1" bitfld.long 0x00 28.--31. " JI ,Jazelle Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 24.--27. " INTI ,Interwork Instructions Support" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x00 20.--23. " IMMI ,Immediate Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 16.--19. " ITEI ,If Then Instructions Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 12.--15. " EXTI ,Extend Instructions Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 8.--11. " E2I ,Exception 2 Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " E1I ,Exception 1 Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 0.--3. " ENDI ,Endian Instructions Support" "Not supported,Supported,?..." rgroup.long c15:0x0220++0x00 line.long 0x00 "ISAR2,Instruction Set Attribute Register 2" bitfld.long 0x00 28.--31. " RI ,Reversal Instructions Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 24.--27. " PSRI ,PSR Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. " UMI ,Advanced Unsigned Multiply Instructions Support" "Not supported,Supported,Supported,?..." textline " " bitfld.long 0x00 16.--19. " SMI ,Advanced Signed Multiply Instructions Support" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x00 12.--15. " MI ,Multiply Instructions Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 8.--11. " II ,Multi-Access Interruptible Instructions Support" "Not supported,Supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " MHI ,Memory Hint Instructions Support" "Not supported,Supported,Supported,Supported,Supported,?..." bitfld.long 0x00 0.--3. " LSI ,Load and Store Instructions Support" "Not supported,Supported,?..." rgroup.long c15:0x0320++0x00 line.long 0x00 "ISAR3,Instruction Set Attribute Register 3" bitfld.long 0x00 28.--31. " T2E ,Thumb-2 Extensions Support" "Not supported,Supported,?..." bitfld.long 0x00 24.--27. " NOPI ,True NOP Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. " TCI ,Thumb Copy Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 16.--19. " TBI ,Table Branch Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 12.--15. " SPI ,Synchronization Primitive Instructions Support" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x00 8.--11. " SVCI ,SVC Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " SIMDI ,Single Instruction Multiple Data (SIMD) Instructions Support" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x00 0.--3. " SI ,Saturate Instructions Support" "Not supported,Supported,?..." rgroup.long c15:0x0420++0x00 line.long 0x00 "ISAR4,Instruction Set Attribute Register 4" bitfld.long 0x00 28.--31. " SWP_frac ,SWAP_frac" "Not supported,Supported,?..." bitfld.long 0x00 24.--27. " PSR_M_I ,PSR_M Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. " SPRI ,Synchronization Primitive instructions" "Not supported,Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 16.--19. " BI ,Barrier Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 12.--15. " SMCI ,SMC Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 8.--11. " WBI ,Write-Back Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " WSI ,With-Shift Instructions Support" "Not supported,Supported,Supported,Supported,Supported,?..." bitfld.long 0x00 0.--3. " UI ,Unprivileged Instructions Support" "Not supported,Supported,Supported,?..." rgroup.long c15:0x0010++0x00 line.long 0x00 "PFR0,Processor Feature Register 0" bitfld.long 0x00 12.--15. " State3 ,Thumb-2 Execution Environment (Thumb-2EE) Support" "Not supported,Supported,?..." bitfld.long 0x00 8.--11. " State2 ,Java Extension Interface Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 4.--7. " State1 ,Thumb Encoding Supported by the Processor Type" "Not supported,Supported,Reserved,Supported,?..." textline " " bitfld.long 0x00 0.--3. " State0 ,ARM Instruction Set Support" "Not supported,Supported,?..." rgroup.long c15:0x0110++0x00 line.long 0x00 "PFR1,Processor Feature Register 1" bitfld.long 0x00 8.--11. " MPM ,Microcontroller Programmer's Model Support" "Not supported,Reserved,Supported,?..." bitfld.long 0x00 4.--7. " SE ,Security Extensions Architecture v1 Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 0.--3. " PM ,Standard ARMv4 Programmer's Model Support" "Not supported,Supported,?..." rgroup.long c15:0x0210++0x00 line.long 0x00 "DFR0,Debug Feature Register 0" bitfld.long 0x00 20.--23. " MDM_MM ,Microcontroller Debug Model Support" "Not supported,Supported,?..." bitfld.long 0x00 16.--19. " TDM_MM ,Trace Debug Model (Memory-Mapped) Support" "Not supported,Supported,?..." bitfld.long 0x00 12.--15. " TDM_CB ,Coprocessor-Based Trace Debug Model Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 8.--11. " CDM_MM ,Memory-Mapped Debug Model Support" "Not supported,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 4.--7. " SDM_CB ,Secure Debug Model (Coprocessor) Support" "Not supported,Reserved,Reserved,v6.1,v7,?..." bitfld.long 0x00 0.--3. " CDM_CB ,Coprocessor Debug Model Support" "Not supported,Reserved,v6,v6.1,v7,?..." tree.end width 0x8 tree "System Control and Configuration" group.long c15:0x1++0x0 line.long 0x0 "SCTLR,Control Register" bitfld.long 0x0 30. " TE ,Thumb exception enable" "ARM,Thumb" bitfld.long 0x0 29. " AFE ,Access Flag Enable" "Disabled,Enabled" bitfld.long 0x0 28. " TRE ,TEX remap enable" "Disabled,Enabled" textline " " bitfld.long 0x0 27. " NMFI ,Nonmaskable Fast Interrupt enable" "Disabled,Enabled" bitfld.long 0x0 25. " EE ,Exception endianess" "Little,Big" bitfld.long 0x0 14. " RR ,Replacement strategy for caches, BTAC, and micro TLBs" "Random,Round robin" textline " " bitfld.long 0x0 13. " V ,Base Location of Exception Registers" "0x00000000,0xFFFF0000" bitfld.long 0x0 12. " I ,Instruction Cache Enable" "Disabled,Enabled" bitfld.long 0x0 11. " Z ,Branch Prediction Enable" "Disabled,Enabled" textline " " bitfld.long 0x0 10. " SW ,SWP/SWPB Enable" "Disabled,Enabled" bitfld.long 0x0 2. " C ,Enable unified cache or data cache" "Disabled,Enabled" bitfld.long 0x0 1. " A ,Strict Alignment" "Disabled,Enabled" textline " " bitfld.long 0x0 0. " M ,MMU or Protection Unit" "Disabled,Enabled" group.long c15:0x101++0x0 line.long 0x0 "ACTLR,Auxiliary Control Register" bitfld.long 0x00 9. " PARON ,Parity On" "Disabled,Enabled" bitfld.long 0x00 8. " ALIOW ,Enable allocation in one cache way only" "Disabled,Enabled" bitfld.long 0x00 7. " EXCL ,Exclusive cache Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 6. " SMP ,Signals if the Cortex-A9 processor is taking part in coherency or not" "0,1" bitfld.long 0x00 3. " FOZ ,Full Of Zero mode Enable" "Disabled,Enabled" bitfld.long 0x00 2. " DP1 ,L1 Dside prefetch Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " PH2 ,L2 prefetch hint Enable" "Disabled,Enabled" bitfld.long 0x00 0. " FW ,Cache and TLB maintenance broadcast" "Disabled,Enabled" group.long c15:0x201++0x0 line.long 0x0 "CPACR,Coprocessor Access Control Register" bitfld.long 0x0 31. " ASEDIS ,Disable Advanced SIMD Extension functionality" "No,Yes" bitfld.long 0x0 30. " D32DIS ,Disable use of D16-D31 of the VFP register file" "No,Yes" bitfld.long 0x0 22.--23. " CP11 ,Coprocesor access control" "Denied,Privileged,Reserved,Full" textline " " bitfld.long 0x0 20.--21. " CP10 ,Coprocesor access control" "Denied,Privileged,Reserved,Full" textline " " group.long c15:0x11++0x0 line.long 0x0 "SCR,Secure Configuration Register" bitfld.long 0x00 6. " nET ,Not early termination" "Not early,Early" bitfld.long 0x00 5. " AW ,Controls whether the Non-secure world can modify the A-bit in the CPSR" "Not allowed,Allowed" bitfld.long 0x00 4. " FW ,FW-bit controls whether the Non-secure world can modify the F-bit in the CPSR" "Not allowed,Allowed" textline " " bitfld.long 0x00 3. " EA ,External Abort exceptions handled in Abort mode or Monitor mode" "Abort,Monitor" bitfld.long 0x00 2. " FIQ ,FIQ exceptions handled in Abort mode or Monitor mode" "FIQ,Monitor" bitfld.long 0x00 1. " IRQ ,IRQ exceptions handled in Abort mode or Monitor mode" "IRQ,Monitor" textline " " bitfld.long 0x00 0. " NS ,Secure mode " "Secure,Non-secure" group.long c15:0x111++0x0 line.long 0x0 "SDER,Secure Debug Enable Register" bitfld.long 0x00 1. " SUNIDEN ,Non-Invasive Secure User Debug Enable bit" "Denied,Permitted" bitfld.long 0x00 0. " SUIDEN ,Invasive Secure User Debug Enable bit" "Denied,Permitted" group.long c15:0x0211++0x00 line.long 0x00 "NSACR,Non-Secure Access Control Register" bitfld.long 0x00 18. " NS_SMP ,Determines if the SMP bit of the Auxiliary Control Register is writable in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 17. " TL ,Lockable Page Table Entries Allocation in Nonsecure World" "Denied,Permitted" bitfld.long 0x00 16. " PLE ,NS accesses to the Preload Engine resources control" "Secure,Non-secure" textline " " bitfld.long 0x00 15. " NSASEDIS ,Disable Non-secure Advanced SIMD Extension functionality" "No,Yes" bitfld.long 0x00 14. " NSD32DIS ,Disable the Non-secure use of D16-D31 of the VFP register" "No,Yes" bitfld.long 0x00 11. " CP11 ,Coprocessor 11 in the Nonsecure World Access Permission" "Denied,Permitted" textline " " bitfld.long 0x00 10. " CP10 ,Coprocessor 10 in the Nonsecure World Access Permission" "Denied,Permitted" group.long c15:0x0311++0x00 line.long 0x00 "VCR,Virtualization Control Register" bitfld.long 0x00 8. " AMO ,Abort Mask Override" "0,1" bitfld.long 0x00 7. " IMO ,IRQ Mask Override" "0,1" bitfld.long 0x00 6. " IFO ,FIQ Mask Override" "0,1" group.long c15:0xf++0x0 line.long 0x00 "PCR,Power Control Register" bitfld.long 0x00 8.--10. " MCL ,Max Clock Latency" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EDCG ,Enable Dynamic Clock Gating" "Disabled,Enabled" textline " " group.long c15:0x000c++0x00 line.long 0x00 "VBAR,Secure or Nonsecure Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 " VBA ,Base Address" group.long c15:0x10c++0x00 line.long 0x0 "MVBAR,Monitor Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 " MVBA , Monitor Vector Base Address" rgroup.long c15:0x1C++0x0 line.long 0x0 "ISR,Interrupt status Register" bitfld.long 0x0 8. " A ,Pending External Abort" "Not pending,Pending" bitfld.long 0x0 7. " I ,Pending IRQ" "Not pending,Pending" bitfld.long 0x0 6. " F ,Pending FIQ" "Not pending,Pending" group.long c15:0x11c++0x0 line.long 0x00 "VIR,Virtualization Interrupt Register" bitfld.long 0x00 8. " VA ,Virtual Abort" "0,1" bitfld.long 0x00 7. " VI ,Virtual IRQ" "0,1" bitfld.long 0x00 6. " VF ,Virtual FIQ" "0,1" tree.end width 0x0d tree "Memory Management Unit" group.long c15:0x1++0x0 line.long 0x0 "SCTLR,Control Register" bitfld.long 0x0 30. " TE ,Thumb exception enable" "ARM,Thumb" bitfld.long 0x0 29. " AFE ,Access Flag Enable" "Disabled,Enabled" bitfld.long 0x0 28. " TRE ,TEX remap enable" "Disabled,Enabled" textline " " bitfld.long 0x0 27. " NMFI ,DNonmaskable Fast Interrupt enable" "Disabled,Enabled" bitfld.long 0x0 25. " EE ,Exception endianess" "Little,Big" bitfld.long 0x0 14. " RR ,Replacement strategy for caches, BTAC, and micro TLBs" "Random,Round robin" textline " " bitfld.long 0x0 13. " V ,Base Location of Exception Registers" "0x00000000,0xFFFF0000" bitfld.long 0x0 12. " I ,Instruction Cache Enable" "Disabled,Enabled" bitfld.long 0x0 11. " Z ,Branch Prediction Enable" "Disabled,Enabled" textline " " bitfld.long 0x0 10. " SW ,SWP/SWPB Enable" "Disabled,Enabled" bitfld.long 0x0 2. " C ,Enable unified cache or data cache" "Disabled,Enabled" bitfld.long 0x0 1. " A ,Strict Alignment" "Disabled,Enabled" textline " " bitfld.long 0x0 0. " M ,MMU or Protection Unit" "Disabled,Enabled" textline " " group.long c15:0x0002++0x00 line.long 0x00 "TTBR0,Translation Table Base Register 0" hexmask.long 0x00 14.--31. 0x4000 " TTB0 ,Translation Table Base Address" bitfld.long 0x00 0. 6. " IRGN[1:0] ,Indicates inner cacheability" "Noncacheable,Back/allocated,Through,Back/not allocated" bitfld.long 0x00 5. " NOS ,Not Outer Shareable" "Outer,Inner" textline " " bitfld.long 0x00 3.--4. " RGN ,Outer Cacheable Attributes for Page Table Walking" "Noncacheable,Back/allocated,Through,Back/not allocated" bitfld.long 0x00 2. " IMP ,Implementation Defined" "0,1" bitfld.long 0x00 1. " S ,Page Table Walk to Shared Memory" "Nonshared,Shared" textline " " bitfld.long 0x00 0. " C ,Cacheable" "Non-cacheable,Cacheable" group.long c15:0x0102++0x00 line.long 0x00 "TTBR1,Translation Table Base Register 1" hexmask.long 0x00 14.--31. 0x4000 " TTB1 ,Translation Table Base Address" bitfld.long 0x00 0. 6. " IRGN[1:0] ,Indicates inner cacheability" "Noncacheable,Back/allocated,Through,Back/not allocated" bitfld.long 0x00 5. " NOS ,Not Outer Shareable" "Outer,Inner" textline " " bitfld.long 0x00 3.--4. " RGN ,Outer Cacheable Attributes for Page Table Walking" "Noncacheable,Back/allocated,Through,Back/not allocated" bitfld.long 0x00 2. " IMP ,Implementation Defined" "0,1" bitfld.long 0x00 1. " S ,Page Table Walk to Shared Memory" "Nonshared,Shared" textline " " bitfld.long 0x00 0. " C ,Cacheable" "Non-cacheable,Cacheable" group.long c15:0x0202++0x00 line.long 0x00 "TTBCR,Translation Table Base Control Register" bitfld.long 0x00 5. " PD1 ,Page Table Walk on a TLB Miss When Using Translation Table Base Register 1" "Enable,Disable" bitfld.long 0x00 4. " PD0 ,Page Table Walk on a TLB Miss When Using Translation Table Base Register 0" "Enable,Disable" bitfld.long 0x0 0.--2. " N ,Translation Table Base Register 0 page table boundary size" "Off,0x80000000,0x40000000,0x20000000,0x10000000,0x08000000,0x04000000,0x02000000" textline " " group.long c15:0x3--0x3 line.long 0x0 "DACR,Domain Access Control Register" bitfld.long 0x0 30.--31. " D15 ,Domain Access 15" "Denied,Client,Reserved,Manager" bitfld.long 0x0 28.--29. " D14 ,Domain Access 14" "Denied,Client,Reserved,Manager" bitfld.long 0x0 26.--27. " D13 ,Domain Access 13" "Denied,Client,Reserved,Manager" bitfld.long 0x0 24.--25. " D12 ,Domain Access 12" "Denied,Client,Reserved,Manager" textline " " bitfld.long 0x0 22.--23. " D11 ,Domain Access 11" "Denied,Client,Reserved,Manager" bitfld.long 0x0 20.--21. " D10 ,Domain Access 10" "Denied,Client,Reserved,Manager" bitfld.long 0x0 18.--19. " D9 ,Domain Access 9" "Denied,Client,Reserved,Manager" bitfld.long 0x0 16.--17. " D8 ,Domain Access 8" "Denied,Client,Reserved,Manager" textline " " bitfld.long 0x0 14.--15. " D7 ,Domain Access 7" "Denied,Client,Reserved,Manager" bitfld.long 0x0 12.--13. " D6 ,Domain Access 6" "Denied,Client,Reserved,Manager" bitfld.long 0x0 10.--11. " D5 ,Domain Access 5" "Denied,Client,Reserved,Manager" bitfld.long 0x0 8.--9. " D4 ,Domain Access 4" "Denied,Client,Reserved,Manager" textline " " bitfld.long 0x0 6.--7. " D3 ,Domain Access 3" "Denied,Client,Reserved,Manager" bitfld.long 0x0 4.--5. " D2 ,Domain Access 2" "Denied,Client,Reserved,Manager" bitfld.long 0x0 2.--3. " D1 ,Domain Access 1" "Denied,Client,Reserved,Manager" bitfld.long 0x0 0.--1. " D0 ,Domain Access 0" "Denied,Client,Reserved,Manager" textline " " group.long c15:0x0005++0x00 line.long 0x00 "DFSR,Data Fault Status Register" bitfld.long 0x00 12. " EXT ,External Abort Qualifier" "DECERR,SLVERR" bitfld.long 0x00 11. " RW ,Access Caused an Abort Type" "Read,Write" textline " " bitfld.long 0x00 4.--7. " DOMAIN ,Domain Accessed When a Data Fault Occurs" "D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15" bitfld.long 0x00 0.--3. 10. " STATUS ,Generated Exception Type" "Reserved,Alignment,Debug,Access/section,Instruction,Translation/section,Access/page,Translation/page,Nontranslation/synchronous external,Domain/section,Reserved,Domain/page,L1/external,Permission/section,L2/external,Permission/page,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous external,?..." group.long c15:0x0006++0x00 line.long 0x00 "DFAR,Data Fault Address Register" hexmask.long 0x00 0.--31. 1. " DFA ,Data Fault Address" group.long c15:0x0105++0x00 line.long 0x00 "IFSR,Instruction Fault Status Register" bitfld.long 0x00 12. " SD ,External Abort Qualifier" "DECERR,SLVERR" bitfld.long 0x00 0.--3. 10. " STATUS ,Generated Exception Type" "Reserved,Alignment,Debug,Access/section,Instruction,Translation/section,Access/page,Translation/page,Nontranslation/synchronous external,Domain/section,Reserved,Domain/page,L1/external,Permission/section,L2/external,Permission/page,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous external,?..." group.long c15:0x0206++0x00 line.long 0x00 "IFAR,Instruction Fault Address Register" hexmask.long 0x00 0.--31. 1. " IFA ,Instruction Fault Address" group.long c15:0x0015++0x00 line.long 0x00 "ADFSR,Auxiliary Data Fault Status Register" hexmask.long 0x00 0.--31. 1. " DAFS ,Data Auxiliary Fault Status" group.long c15:0x0115++0x00 line.long 0x00 "AIFSR,AuxiliaryInstruction Fault Status Register" hexmask.long 0x00 0.--31. 1. " IAFS ,Instruction Auxiliary Fault Status" textline " " group.long c15:0xa++0x0 line.long 0x0 "TLBLR,TLB Lockdown Register" bitfld.long 0x0 28.--29. " VICTIM ,Victim Value Increments after Each Tabel Walk" "0,1,2,3" bitfld.long 0x0 0. " P ,Lockdown by Victim or Set Associative Region of TLB" "Associative,Lockdown" group.long c15:0x0047++0x00 line.long 0x00 "PAR,PA Register" hexmask.long 0x00 12.--31. 0x1000 " PA ,Physical Adress" bitfld.long 0x00 10. " NOS ,Not Outer Shareable attribute" "Outer shareable,Not outer shareable" textline " " bitfld.long 0x00 9. " NS ,Non-secure" "Not secured,Secured" bitfld.long 0x00 7. " SH ,Shareable attribute" "Non-shareable,Shareable" textline " " bitfld.long 0x00 4.--6. " Inner ,Signals region inner attributes" "Noncacheable,Strongly-ordered,Reserved,Device,Reserved,Write-back allocate,Write-through,Write-back" bitfld.long 0x00 2.--3. " Outer ,Signals region outer attributes for normal memory type" "Noncacheable,Write-back allocate,Write-through,Write-back" textline " " bitfld.long 0x00 1. " SS ,Supersection Enable bit" "Disabled,Enabled" bitfld.long 0x00 0. " F ,Translation Successful" "Successful,No successful" textline " " group.long c15:0x002A++0x0 line.long 0x00 "PRRR,Primary Region Remap Register" bitfld.long 0x00 31. " NOS7 ,Outer Shareable property mapping for memory attribute 7" "Outer,Inner" bitfld.long 0x00 30. " NOS6 ,Outer Shareable property mapping for memory attribute 6" "Outer,Inner" textline " " bitfld.long 0x00 29. " NOS5 ,Outer Shareable property mapping for memory attribute 5" "Outer,Inner" bitfld.long 0x00 28. " NOS4 ,Outer Shareable property mapping for memory attribute 4" "Outer,Inner" textline " " bitfld.long 0x00 27. " NOS3 ,Outer Shareable property mapping for memory attribute 3" "Outer,Inner" bitfld.long 0x00 26. " NOS2 ,Outer Shareable property mapping for memory attribute 2" "Outer,Inner" textline " " bitfld.long 0x00 25. " NOS1 ,Outer Shareable property mapping for memory attribute 1" "Outer,Inner" bitfld.long 0x00 24. " NOS0 ,Outer Shareable property mapping for memory attribute 0" "Outer,Inner" textline " " bitfld.long 0x00 19. " NS1 ,Shareable Attribute Remap when S=1 for Normal Regions" "Remapped,Not remapped" bitfld.long 0x00 18. " NS0 ,Shareable Attribute Remap when S=0 for Normal Regions" "Not remapped,Remapped" textline " " bitfld.long 0x00 17. " DS1 ,Shareable Attribute Remap when S=1 for Device regions" "Remapped,Not remapped" bitfld.long 0x00 16. " DS0 ,Shareable Attribute Remap when S=0 for Device regions" "Not remapped,Remapped" textline " " bitfld.long 0x00 14.--15. " TR7 ,{TEX[0] C B} = b111 Remap" "Strongly ordered,Device,Normal,?..." bitfld.long 0x00 12.--13. " TR6 ,{TEX[0] C B} = b110 Remap" "Strongly ordered,Device,Normal,?..." textline " " bitfld.long 0x00 10.--11. " TR5 ,{TEX[0] C B} = b101 Remap" "Strongly ordered,Device,Normal,?..." bitfld.long 0x00 8.--9. " TR4 ,{TEX[0] C B} = b100 Remap" "Strongly ordered,Device,Normal,?..." textline " " bitfld.long 0x00 6.--7. " TR3 ,{TEX[0] C B} = b011 Remap" "Strongly ordered,Device,Normal,?..." bitfld.long 0x00 4.--5. " TR2 ,{TEX[0] C B} = b010 Remap" "Strongly ordered,Device,Normal,?..." textline " " bitfld.long 0x00 2.--3. " TR1 ,{TEX[0] C B} = b001 Remap" "Strongly ordered,Device,Normal,?..." bitfld.long 0x00 0.--1. " TR0 ,{TEX[0] C B} = b000 Remap" "Strongly ordered,Device,Normal,?..." group.long c15:0x012A++0x0 line.long 0x00 "NMRR,Normal Memory Remap Register" bitfld.long 0x00 30.--31. " OR7 ,Outer Attribute for {TEX[0] C B} = b111 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 28.--29. " OR6 ,Outer Attribute for {TEX[0] C B} = b110 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 26.--27. " OR5 ,Outer Attribute for {TEX[0] C B} = b101 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 24.--25. " OR4 ,Outer Attribute for {TEX[0] C B} = b100 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 22.--23. " OR3 ,Outer Attribute for {TEX[0] C B} = b011 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 20.--21. " OR2 ,Outer Attribute for {TEX[0] C B} = b010 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 18.--19. " OR1 ,Outer Attribute for {TEX[0] C B} = b001 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 16.--17. " OR0 ,Outer Attribute for {TEX[0] C B} = b000 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 14.--15. " IR7 ,Inner attribute for {TEX[0] C B} = b111 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 12.--13. " IR6 ,Inner attribute for {TEX[0] C B} = b110 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 10.--11. " IR5 ,Inner attribute for {TEX[0] C B} = b101 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 8.--9. " IR4 ,Inner attribute for {TEX[0] C B} = b100 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 6.--7. " IR3 ,Inner attribute for {TEX[0] C B} = b011 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 4.--5. " IR2 ,Inner attribute for {TEX[0] C B} = b010 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 2.--3. " IR1 ,Inner attribute for {TEX[0] C B} = b001 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 0.--1. " IR0 ,Inner attribute for {TEX[0] C B} = b000 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " group.long c15:0x400f++0x0 line.long 0x00 "CBAR,Configuration Base Address Register" hexmask.long 0x00 0.--31. 1. " CBA ,Configuration Base Address" textline " " rgroup.long c15:0x000d++0x00 line.long 0x00 "FCSEIDR,FCSE PID Register" hexmask.long.byte 0x00 25.--31. 0x02 " PID ,Process for Fast Context Switch Identification and Specification" group.long c15:0x10d++0x0 line.long 0x0 "CONTEXTIDR,Context ID Register" hexmask.long.tbyte 0x0 8.--31. 1. " PROCID ,Process ID" hexmask.long.byte 0x0 0.--7. 1. " ASID ,Application Space ID" group.long c15:0x020d++0x00 line.long 0x00 "TPIDRURW,User Read/Write Thread ID Register" hexmask.long 0x00 0.--31. 1. " TPIDRURW ,User Read/Write Thread ID" group.long c15:0x030d++0x00 line.long 0x00 "TPIDRURO,User Read-only Thread ID Register" hexmask.long 0x00 0.--31. 1. " TPIDRURO ,User Read-only Thread ID" group.long c15:0x040d++0x00 line.long 0x00 "TPIDRPRW,Privileged Only Thread ID Register" hexmask.long 0x00 0.--31. 1. " TPIDRPRW ,Privileged Only Thread ID" tree.end width 0xC tree "Cache Control and Configuration" rgroup.long c15:0x1100++0x0 line.long 0x0 "CLIDR,Cache Level ID Register" bitfld.long 0x00 27.--29. " LOU ,Level of Unification" "Level 1,Level 2,Level 3,Level 4,Level 5,Level 6,Level 7,Level 8" bitfld.long 0x00 24.--26. " LOC ,Level of Coherency" "Level 1,Level 2,Level 3,Level 4,Level 5,Level 6,Level 7,Level 8" textline " " bitfld.long 0x00 21.--23. " LOUIS ,Level of Unification Inner Shareable" "Level 1,Level 2,Level 3,Level 4,Level 5,Level 6,Level 7,Level 8" bitfld.long 0x00 18.--20. " CType7 ,Cache type for levels 7" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." textline " " bitfld.long 0x00 15.--17. " CType6 ,Cache type for levels 6" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." bitfld.long 0x00 12.--14. " CType5 ,Cache type for levels 5" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." textline " " bitfld.long 0x00 9.--11. " CType4 ,Cache type for levels 4" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." bitfld.long 0x00 6.--8. " CType3 ,Cache type for levels 3" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." textline " " bitfld.long 0x00 3.--5. " CType2 ,Cache type for levels 2" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." bitfld.long 0x00 0.--2. " CType1 ,Cache type for levels 1" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." rgroup.long c15:0x1000++0x0 line.long 0x0 "CCSIDR,Current Cache Size ID Register" bitfld.long 0x00 31. " WT ,Write-Through" "Not Supported,Supported" bitfld.long 0x00 30. " WB ,Write-Back" "Not Supported,Supported" textline " " bitfld.long 0x00 29. " RA ,Read-Allocate" "Not Supported,Supported" bitfld.long 0x00 28. " WA ,Write-Allocate" "Not Supported,Supported" textline " " hexmask.long.word 0x00 13.--27. 1. " SETS ,Number of Sets" hexmask.long.word 0x00 3.--12. 1. " ASSOC ,Associativity" textline " " bitfld.long 0x00 0.--2. " LSIZE ,Line Size" "4 words,8 words,16 words,32 words,64 words,128 words,256 words,512 words" group.long c15:0x2000++0x0 line.long 0x0 "CSSELR,Cache Size Selection Register" bitfld.long 0x00 1.--3. " LEVEL ,Level" "Level 1,Level 2,Level 3,Level 4,Level 5,Level 6,Level 7,Level 8" bitfld.long 0x00 0. " IND ,Instruction/Not Data" "Data,Instruction" tree.end width 12. tree "System Performance Monitor" group.long c15:0xC9++0x0 line.long 0x0 "PMCR,Performance Monitor Control Register" hexmask.long.byte 0x00 24.--31. 1. " IMP ,Implementer code" hexmask.long.byte 0x00 16.--23. 1. " IDCODE ,Identification code" bitfld.long 0x00 11.--15. " N ,Number of counters implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " DP ,Disable CCNT when prohibited" "Enabled,Disabled" textline " " bitfld.long 0x00 4. " X ,Export Enabled" "Disabled,Enabled" bitfld.long 0x00 3. " D ,Clock Divider" "Every cycle,64th cycle" bitfld.long 0x00 2. " C ,Clock Counter Reset" "No action,Reset" bitfld.long 0x00 1. " P ,Performance Counter Reset" "No action,Reset" textline " " bitfld.long 0x00 0. " E ,Counters Enable" "Disabled,Enabled" group.long c15:0x1C9++0x0 line.long 0x0 "PMCNTENSET,Count Enable Set Register" bitfld.long 0x00 31. " C ,CCNT Enabled" "Disabled,Enabled" bitfld.long 0x00 5. " P5 ,PMN5 Enabled" "Disabled,Enabled" bitfld.long 0x00 4. " P4 ,PMN5 Enabled" "Disabled,Enabled" bitfld.long 0x00 3. " P3 ,PMN3 Enabled" "Disabled,Enabled" textline " " bitfld.long 0x00 2. " P2 ,PMN2 Enabled" "Disabled,Enabled" bitfld.long 0x00 1. " P1 ,PMN1 Enabled" "Disabled,Enabled" bitfld.long 0x00 0. " P0 ,PMN0 Enabled" "Disabled,Enabled" group.long c15:0x2C9++0x0 line.long 0x0 "PMCNTENCLR,Count Enable Clear Register" bitfld.long 0x00 31. " C ,CCNT Enabled" "Disabled,Enabled" bitfld.long 0x00 5. " P5 ,PMN5 Enabled" "Disabled,Enabled" bitfld.long 0x00 4. " P4 ,PMN5 Enabled" "Disabled,Enabled" bitfld.long 0x00 3. " P3 ,PMN3 Enabled" "Disabled,Enabled" textline " " bitfld.long 0x00 2. " P2 ,PMN2 Enabled" "Disabled,Enabled" bitfld.long 0x00 1. " P1 ,PMN1 Enabled" "Disabled,Enabled" bitfld.long 0x00 0. " P0 ,PMN0 Enabled" "Disabled,Enabled" group.long c15:0x3C9++0x0 line.long 0x0 "PMOVSR,Overflow Flag Status Register" eventfld.long 0x00 31. " C ,CCNT overflowed" "No overflow,Overflow" eventfld.long 0x00 5. " P5 ,PMN5 overflow" "No overflow,Overflow" eventfld.long 0x00 4. " P4 ,PMN5 overflow" "No overflow,Overflow" eventfld.long 0x00 3. " P3 ,PMN3 overflow" "No overflow,Overflow" textline " " eventfld.long 0x00 2. " P2 ,PMN2 overflow" "No overflow,Overflow" eventfld.long 0x00 1. " P1 ,PMN1 overflow" "No overflow,Overflow" eventfld.long 0x00 0. " P0 ,PMN0 overflow" "No overflow,Overflow" group.long c15:0x4C9++0x0 line.long 0x0 "PMSWINC,Software Increment Register" eventfld.long 0x00 5. " P5 ,Increment PMN2" "No action,Increment" eventfld.long 0x00 4. " P4 ,Increment PMN1" "No action,Increment" eventfld.long 0x00 3. " P3 ,Increment PMN3" "No action,Increment" eventfld.long 0x00 2. " P2 ,Increment PMN2" "No action,Increment" textline " " eventfld.long 0x00 1. " P1 ,Increment PMN1" "No action,Increment" eventfld.long 0x00 0. " P0 ,Increment PMN0" "No action,Increment" group.long c15:0x5C9++0x0 line.long 0x0 "PMSELR,Performance Counter Selection Register" bitfld.long 0x00 0.--5. " SEL ,Selection value" "CNT0,CNT1,CNT2,CNT3,CNT4,CNT5,?..." group.long c15:0xD9++0x0 line.long 0x00 "PMCCNTR,Cycle Count Register" hexmask.long 0x00 0.--31. 1. " CCNT ,Cycle Count" group.long c15:0x01d9++0x00 line.long 0x00 "PMXEVTYPER,Event Type Select Register" hexmask.long.byte 0x00 0.--7. 1. " EVCNT ,Event to count" group.long c15:0x02d9++0x00 line.long 0x00 "PMXEVCNTR,Event Count Register" hexmask.long 0x00 0.--31. 1. " PMNX ,Event Count" group.long c15:0xE9++0x0 line.long 0x0 "PMUSERENR,User Enable Register" bitfld.long 0x00 0. " EN ,User Mode Enable" "Disabled,Enabled" group.long c15:0x1E9++0x0 line.long 0x0 "PMINTENSET,Interrupt Enable Set Register" bitfld.long 0x00 31. " C ,CCNT Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. " P5 ,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 4. " P4 ,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. " P3 ,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 2. " P2 ,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. " P1 ,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. " P0 ,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.long c15:0x2E9++0x0 line.long 0x0 "PMINTENCLR,Interrupt Enable Clear Register" eventfld.long 0x00 31. " C ,CCNT Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 5. " P5 ,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 4. " P4 ,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 3. " P3 ,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" textline " " eventfld.long 0x00 2. " P2 ,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 1. " P1 ,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 0. " P0 ,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" tree.end width 8. tree "Preload Engine" rgroup.long c15:0x000b++0x00 line.long 0x00 "PLEIDR,PLE ID Register" bitfld.long 0x00 16.--20. " FIFOS ,PLE FIFO size" "Not present,Reserved,Reserved,Reserved,4,Reserved,Reserved,Reserved,8,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,16,?..." bitfld.long 0x00 0. " PEP ,Preload Engine presence" "Not present,Present" rgroup.long c15:0x020b++0x00 line.long 0x00 "PLEASR,PLE Activity Status Register" bitfld.long 0x00 0. " R ,PLE Channel running" "Not running,Running" rgroup.long c15:0x040b++0x00 line.long 0x00 "PLEFSR,PLE FIFO Status Register" bitfld.long 0x00 0.--4. " AE ,Number of available entries in the PLE FIFO" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long c15:0x001b++0x00 line.long 0x00 "PLEUAR,Preload Engine User Accessibility Register" bitfld.long 0x00 0. " U ,User accessibility" "Not permited,Permited" group.long c15:0x011b++0x00 line.long 0x00 "PLEPCR,Preload Engine Parameters Control Register" hexmask.long.word 0x00 16.--29. 1. " BSM ,Block size mask" hexmask.long.byte 0x00 8.--15. 1. " BNM ,Block number mask" hexmask.long.byte 0x00 0.--7. 1. " WS ,PLE wait states" tree.end tree "NEON" rgroup.long c15:0x000f++0x00 line.long 0x00 "NEON,NEON busy Register" bitfld.long 0x00 0. " Busy ,NEON busy" "Not busy,Busy" tree.end width 0xb width 9. tree "Debug Registers" tree "Jazelle Register" group.long c14:0x7000++0x0 line.long 0x00 "JIDR,Jazelle ID Register" bitfld.long 0x00 28.--31. " ARCH ,Architecture code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 20.--27. 1. " DESIGN ,Implementor code of the designer of the subarchitecture" textline " " hexmask.long.byte 0x00 12.--19. 1. " SAMAJ ,The subarchitecture code" bitfld.long 0x00 8.--11. " SAMIN ,The subarchitecture minor code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 6. " TRTBFR ,Format of the Jazelle Configurable Opcode Translation Table Register" "0,1" bitfld.long 0x00 0.--5. " TRTBSZ ,Size of the Jazelle Configurable Opcode Translation Table Register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long c14:0x7001++0x0 line.long 0x00 "JOSCR,Jazelle OS Control Register" bitfld.long 0x00 1. " CV ,Configuration Valid" "Not valid,Valid" bitfld.long 0x00 0. " CD ,Configuration Disabled" "No,Yes" group.long c14:0x7002++0x0 line.long 0x00 "JMCR,Jazelle Main Configuration Register" bitfld.long 0x00 31. " nAR ,Not Array Operations" "Disabled,Enabled" bitfld.long 0x00 30. " FP ,Floating-point opcodes handler" "VM implementation,VFP instructions" bitfld.long 0x00 29. " AP ,Array Pointer" "Handler,Pointer" textline " " bitfld.long 0x00 28. " OP ,Object Pointer" "Handler,Pointer" bitfld.long 0x00 27. " IS ,Index Size" "8 bits,16 bits" bitfld.long 0x00 26. " SP ,Static Pointer" "Handler,Pointer" textline " " bitfld.long 0x00 0. " JE ,Jazelle Enable" "Disabled,Enabled" group.long c14:0x7003++0x0 line.long 0x00 "JPR,Jazelle Parameters Register" bitfld.long 0x00 17.--21. " BSH ,Bounds SHift" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 12.--16. " sADO ,Signed Array Descriptor Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 8.--11. " ARO ,Array Reference Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 4.--7. " STO ,STatic Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " ODO ,Object Descriptor Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" wgroup.long c14:0x7004++0x0 line.long 0x00 "JCOTTRR,Jazelle Configurable Opcode Translation Table Register" bitfld.long 0x00 10.--15. " OPCODE ,Bottom bits of the configurable opcode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--3. " OPERATION ,Code for the operation" "0,1,2,3,4,5,6,7,8,9,?..." tree.end width 11. tree "Processor Identifier Registers" rgroup c14:0x340--0x340 line.long 0x00 "CPUID,Main ID Register" hexmask.long.byte 0x0 24.--31. 0x1 " IMPL ,Implementer code" hexmask.long.byte 0x0 20.--23. 0x1 " SPECREV ,Variant number" textline " " hexmask.long.byte 0x0 16.--19. 0x1 " ARCH , Architecture" hexmask.long.word 0x0 4.--15. 0x1 " PARTNUM ,Part Number" textline " " hexmask.long.byte 0x0 0.--3. 0x1 " REV ,Layout Revision" rgroup c14:0x341--0x341 line.long 0x00 "CACHETYPE,Cache Type Register" bitfld.long 0x0 29.--31. " FORMAT ,Format" "Not ARMv7,Not ARMv7,Not ARMv7,Not ARMv7,ARMv7,Not ARMv7,Not ARMv7,Not ARMv7" bitfld.long 0x0 24.--27. " CWG ,Cache Writeback Granule" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x0 20.--23. " ERG ,Exclusives Reservation Granule" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " DMinLine ,Words of Smallest Line Length in L1 or L2 Data Cache Number" "Reserved,Reserved,Reserved,Reserved,16x32-bit words,?..." textline " " bitfld.long 0x00 14.--15. " L1_Ipolicy ,VIPT Instruction Cache Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " IMinLine ,Words of Smallest Line Length in L1 or L2 Instruction Cache Number" "Reserved,Reserved,Reserved,Reserved,16x32-bit words,?..." rgroup c14:0x343--0x343 line.long 0x00 "TLBTYPE,TLB Type Register" hexmask.long.byte 0x0 16.--23. 0x1 " ILsize ,Specifies the number of instruction TLB lockable entries" hexmask.long.byte 0x0 8.--15. 0x1 " DLsize ,Specifies the number of unified or data TLB lockable entries" textline " " bitfld.long 0x0 1. " TLB_size ,TLB Size" "64,128" bitfld.long 0x0 0. " U ,Unified or separate instruction TLBs" "Unified,Separate" rgroup c14:0x348--0x348 line.long 0x00 "ID_PFR0,Processor Feature Register 0" bitfld.long 0x00 12.--15. " State3 ,Thumb-2 Execution Environment (Thumb-2EE) Support" "Not supported,Supported,?..." bitfld.long 0x00 8.--11. " State2 ,Java Extension Interface Support" "Not supported,Supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " State1 ,Thumb Encoding Supported by the Processor Type" "Not supported,Supported,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " State0 ,ARM Instruction Set Support" "Not supported,Supported,?..." rgroup c14:0x349--0x349 line.long 0x00 "ID_PFR1,Processor Feature Register 1" bitfld.long 0x00 8.--11. " MPM ,Microcontroller Programmer's Model Support" "Not supported,Reserved,Supported,?..." bitfld.long 0x00 4.--7. " SE ,Security Extensions Architecture v1 Support" "Not supported,Supported,Supported,?..." textline " " bitfld.long 0x00 0.--3. " PM ,Standard ARMv4 Programmer's Model Support" "Not supported,Supported,?..." rgroup c14:0x34a--0x34a line.long 0x00 "ID_DFR0,Debug Feature Register 0" bitfld.long 0x00 20.--23. " MDM_MM ,Microcontroller Debug Model Support" "Not supported,Supported,?..." bitfld.long 0x00 16.--19. " TDM_MM ,Trace Debug Model (Memory-Mapped) Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 12.--15. " TDM_CB ,Coprocessor-Based Trace Debug Model Support" "Not supported,Supported,?..." bitfld.long 0x00 8.--11. " CDM_MM ,Memory-Mapped Debug Model Support" "Not supported,Reserved,Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " SDM_CB ,Secure Debug Model (Coprocessor) Support" "Not supported,Reserved,Reserved,v6.1,v7,?..." bitfld.long 0x00 0.--3. " CDM_CB ,Coprocessor Debug Model Support" "Not supported,Reserved,v6,v6.1,v7,?..." rgroup c14:0x34c--0x34c line.long 0x00 "ID_MMFR0,Processor Feature Register 0" bitfld.long 0x00 28.--31. " ISB ,Innermost shareability bits" "Non-cacheable,Hardware coherency,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Ignored" bitfld.long 0x00 24.--27. " FCSE ,Fast Context Switch Memory Mappings Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 20.--23. " ARS ,Auxiliary Registers Support" "Not supported,Control only,Fault status and Control,?..." bitfld.long 0x00 16.--19. " TCM ,TCM and Associated DMA Support" "Not supported,IMPLEMENTATION DEFINED,?..." textline " " bitfld.long 0x00 12.--15. " SLS ,Shareability levels Support" "One level,Two levels,?..." bitfld.long 0x00 8.--11. " OSS ,Outermost shareability Support" "Non-cacheable,Supported,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Ignored" textline " " bitfld.long 0x00 4.--7. " PMSA ,Physical Memory System Architecture (PMSA) Support" "Not supported,IMPLEMENTATION DEFINED,PMSAv6,PMSAv7,?..." bitfld.long 0x00 0.--3. " VMSA ,Virtual Memory System Architecture (VMSA) Support" "Not supported,IMPLEMENTATION DEFINED,VMSAv6,VMSAv7,?..." rgroup c14:0x34d--0x34d line.long 0x00 "ID_MMFR1,Processor Feature Register 1" bitfld.long 0x00 28.--31. " BTB ,Branch Predictor" "Disabled,Required,Required,Required,Not required,?..." bitfld.long 0x00 24.--27. " L1TCO ,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 20.--23. " L1UCMO ,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 16.--19. " L1HCMO ,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 12.--15. " L1UCLMOSW ,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. " L1HCLMOSW ,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 4.--7. " L1UCLMOMVA ,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 0.--3. " L1HCLMOMVA ,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..." rgroup c14:0x34e--0x34e line.long 0x00 "ID_MMFR2,Processor Feature Register 2" bitfld.long 0x00 28.--31. " HAF ,Hardware Access Flag Support" "Not supported,Supported,?..." bitfld.long 0x00 24.--27. " WFI ,Wait for Interrupt Stalling Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 20.--23. " MBF ,Memory Barrier Operations Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 16.--19. " UTLBMO ,TLB Maintenance Operations/Unified Architecture Support" "Not supported,Supported,Supported,Supported,?..." textline " " bitfld.long 0x00 12.--15. " HTLBMO ,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 8.--11. " HL1CMRO ,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " HL1BPCRO ,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,Supported,?..." bitfld.long 0x00 0.--3. " HL1FPCRO ,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,Supported,?..." rgroup c14:0x34f--0x34f line.long 0x00 "ID_MMFR3,Processor Feature Register 3" bitfld.long 0x00 28.--31. " SS ,Supersection support" "Supported,?..." bitfld.long 0x00 20.--23. " CW ,Coherent walk" "Supported,?..." textline " " bitfld.long 0x00 12.--15. " MB ,Invalidate broadcast Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. " BPM ,Invalidate Branch predictor Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " HCMOSW ,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. " HCMOMVA ,Invalidate Cache MVA Support" "Reserved,Supported,?..." rgroup c14:0x350--0x350 line.long 0x00 "ID_ISAR0,ISA Feature Register 0" bitfld.long 0x00 24.--27. " DIVI ,Divide Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 20.--23. " DEBI ,Debug Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 16.--19. " CI ,Coprocessor Instructions Support" "Not supported,Supported,Supported,Supported,Supported,?..." bitfld.long 0x00 12.--15. " CBI ,Combined Compare and Branch Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 8.--11. " BI ,Bitfield Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 4.--7. " BCI ,Bit Counting Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 0.--3. " SI ,Swap Instructions Support" "Not supported,Supported,?..." rgroup c14:0x351--0x351 line.long 0x00 "ID_ISAR1,ISA Feature Register 1" bitfld.long 0x00 28.--31. " JI ,Jazelle Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 24.--27. " INTI ,Interwork Instructions Support" "Not supported,Supported,Supported,Supported,?..." textline " " bitfld.long 0x00 20.--23. " IMMI ,Immediate Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 16.--19. " ITEI ,If Then Instructions Support" "Not supported,Supported,Supported,?..." textline " " bitfld.long 0x00 12.--15. " EXTI ,Extend Instructions Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 8.--11. " E2I ,Exception 2 Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " E1I ,Exception 1 Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 0.--3. " ENDI ,Endian Instructions Support" "Not supported,Supported,?..." rgroup c14:0x352--0x352 line.long 0x00 "ID_ISAR2,ISA Feature Register 2" bitfld.long 0x00 28.--31. " RI ,Reversal Instructions Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 24.--27. " PSRI ,PSR Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 20.--23. " UMI ,Advanced Unsigned Multiply Instructions Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 16.--19. " SMI ,Advanced Signed Multiply Instructions Support" "Not supported,Supported,Supported,Supported,?..." textline " " bitfld.long 0x00 12.--15. " MI ,Multiply Instructions Support" "Not supported,Supported,Supported,?..." bitfld.long 0x00 8.--11. " II ,Multi-Access Interruptible Instructions Support" "Not supported,Supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " MHI ,Memory Hint Instructions Support" "Not supported,Supported,Supported,Supported,Supported,?..." bitfld.long 0x00 0.--3. " LSI ,Load and Store Instructions Support" "Not supported,Supported,?..." rgroup c14:0x353--0x353 line.long 0x00 "ID_ISAR3,ISA Feature Register 3" bitfld.long 0x00 28.--31. " T2E ,Thumb-2 Extensions Support" "Not supported,Supported,?..." bitfld.long 0x00 24.--27. " NOPI ,True NOP Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 20.--23. " TCI ,Thumb Copy Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 16.--19. " TBI ,Table Branch Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 12.--15. " SPI ,Synchronization Primitive Instructions Support" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x00 8.--11. " SVCI ,SVC Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " SIMDI ,Single Instruction Multiple Data (SIMD) Instructions Support" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x00 0.--3. " SI ,Saturate Instructions Support" "Not supported,Supported,?..." rgroup c14:0x354--0x354 line.long 0x00 "ID_ISAR4,ISA Feature Register 4" bitfld.long 0x00 28.--31. " SWP_frac ,SWAP_frac" "Not supported,Supported,?..." bitfld.long 0x00 24.--27. " PSR_M_I ,PSR_M Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 20.--23. " SPRI ,Synchronization Primitive instructions" "Not supported,Reserved,Reserved,Supported,?..." bitfld.long 0x00 16.--19. " BI ,Barrier Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 12.--15. " SMCI ,SMC Instructions Support" "Not supported,Supported,?..." bitfld.long 0x00 8.--11. " WBI ,Write-Back Instructions Support" "Not supported,Supported,?..." textline " " bitfld.long 0x00 4.--7. " WSI ,With-Shift Instructions Support" "Not supported,Supported,Supported,Supported,Supported,?..." bitfld.long 0x00 0.--3. " UI ,Unprivileged Instructions Support" "Not supported,Supported,Supported,?..." tree.end tree "Coresight Management Registers" width 0xC textline " " group c14:0x3c0--0x3c0 line.long 0x0 "ITCTRL,Integration Mode Control Register" bitfld.long 0x0 0. " IME ,Integration Mode Enable" "Disabled,Enabled" group c14:0x3e8--0x3e8 line.long 0x0 "CLAIMSET,Claim Tag Set Register" bitfld.long 0x0 7. " CT7 ,Claim Tag 7" "No Effect,Set" bitfld.long 0x0 6. " CT6 ,Claim Tag 6" "No Effect,Set" textline " " bitfld.long 0x0 5. " CT5 ,Claim Tag 5" "No Effect,Set" bitfld.long 0x0 4. " CT4 ,Claim Tag 4" "No Effect,Set" textline " " bitfld.long 0x0 3. " CT3 ,Claim Tag 3" "No Effect,Set" bitfld.long 0x0 2. " CT2 ,Claim Tag 2" "No Effect,Set" textline " " bitfld.long 0x0 1. " CT1 ,Claim Tag 1" "No Effect,Set" bitfld.long 0x0 0. " CT0 ,Claim Tag 0" "No Effect,Set" group c14:0x3e9--0x3e9 line.long 0x0 "CLAIMCLR,Claim Tag Clear Register" bitfld.long 0x0 7. " CT7 ,Claim Tag 7" "No Effect,Cleared" bitfld.long 0x0 6. " CT6 ,Claim Tag 6" "No Effect,Cleared" textline " " bitfld.long 0x0 5. " CT5 ,Claim Tag 5" "No Effect,Cleared" bitfld.long 0x0 4. " CT4 ,Claim Tag 4" "No Effect,Cleared" textline " " bitfld.long 0x0 3. " CT3 ,Claim Tag 3" "No Effect,Cleared" bitfld.long 0x0 2. " CT2 ,Claim Tag 2" "No Effect,Cleared" textline " " bitfld.long 0x0 1. " CT1 ,Claim Tag 1" "No Effect,Cleared" bitfld.long 0x0 0. " CT0 ,Claim Tag 0" "No Effect,Cleared" wgroup c14:0x3ec--0x3ec line.long 0x0 "LAR,Lock Access Register" hexmask.long.long 0x0 0.--31. 1. " LACK ,Lock Access Control Key" rgroup c14:0x3ed--0x3ed line.long 0x0 "LSR,Lock Status Register" bitfld.long 0x0 2. " 32ACND ,32-bit Access Needed" "Needed,Not needed" bitfld.long 0x0 1. " WLCK ,Writes Lock" "Permitted,Ignored" textline " " bitfld.long 0x0 0. " LI ,Lock Implementation" "Lock ignored,Unlock required" width 0xc rgroup c14:0x3ee--0x3ee line.long 0x0 "AUTHSTATUS,Authentication Status Register" bitfld.long 0x0 7. " SNIDFI ,Secure Non-invasive Debug Features Implemented" "Not Implemented,Implemented" bitfld.long 0x0 6. " SNIDE ,Secure Non-invasive Debug Enable" "Disabled,Enabled" textline " " bitfld.long 0x0 5. " SIDFI ,Secure Invasive Debug Feauter Implemented" "Not Implemented,Implemented" bitfld.long 0x0 4. " SIDE ,Secure Invasive Debug Enable" "Disabled,Enabled" textline " " bitfld.long 0x0 3. " NSNIDFI ,Non-secure Non-invasive Debug Feature Implemented" "Not Implemented,Implemented" bitfld.long 0x0 2. " NSNIDE ,Non-secure Non-invasive Debug Enable" "Disabled,Enabled" textline " " bitfld.long 0x0 1. " NSIDFI ,Non-secure Invasive Debug Implemented" "Not Implemented,Implemented" bitfld.long 0x0 0. " NSIDE ,Non-secure Invasive Debug Enable" "Disabled,Enabled" width 0xc rgroup c14:0x3f2--0x3f2 line.long 0x0 "DEVID,Device Identifier" bitfld.long 0x00 0.--3. " PCSAMPLE ,Level of Program Counter sampling support (DBGPCSR and DBGCIDSR)" "Not implemented,DBGPCSR,Both,?..." rgroup c14:0x3f3--0x3f3 line.long 0x0 "DEVTYPE,Device Type" hexmask.long.byte 0x0 4.--7. 1. " STPC ,Sub Type: Processor Core" hexmask.long.byte 0x0 0.--3. 1. " MCDL ,Main Class: Debug Logic" rgroup c14:0x3f8--0x3f8 line.long 0x0 "PID0,Peripherial ID0" hexmask.long.byte 0x0 0.--7. 1. " PN ,Part Number [7:0]" rgroup c14:0x3f9--0x3f9 line.long 0x0 "PID1,Peripherial ID1" hexmask.long.byte 0x0 4.--7. 1. " JEP106 ,JEP106 Identity Code [3:0]" hexmask.long.byte 0x0 0.--3. 1. " PN ,Part Number [11:8]" rgroup c14:0x3fa--0x3fa line.long 0x0 "PID2,Peripherial ID2" hexmask.long.byte 0x0 4.--7. 1. " REV ,Revision" bitfld.long 0x00 3. " JEPCD ,JEP 106 ID code" "Not used,Used" textline " " hexmask.long.byte 0x0 0.--2. 1. " JEP106 ,JEP106 Identity Code [6:4]" rgroup c14:0x3fb--0x3fb line.long 0x0 "PID3,Peripherial ID3" hexmask.long.byte 0x0 4.--7. 1. " REVA ,RevAnd" hexmask.long.byte 0x0 0.--3. 1. " CMOD ,Customer Modified" rgroup c14:0x3f4--0x3f4 line.long 0x0 "PID4,Peripherial ID4" bitfld.long 0x0 4.--7. " 4KBC ,Number of 4KB Blocks Occupied" "1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768" bitfld.long 0x0 0.--3. " JEP106 ,JEP106 Continuation Code" "0000,0001,0010,0011,0100,0101,0110,0111,1000,1001,1010,1011,1100,1101,1110,1111" rgroup c14:0x3fc--0x3fc line.long 0x0 "COMPONENTID0,Component ID0" hexmask.long.byte 0x0 0.--7. 1. " PRBL ,Preamble" rgroup c14:0x3fd--0x3fd line.long 0x0 "COMPONENTID1,Component ID1" hexmask.long.byte 0x0 4.--7. 1. " CCLASS ,Component Class (CoreSight Component)" hexmask.long.byte 0x0 0.--3. 1. " PRBL ,Preamble" rgroup c14:0x3fe--0x3fe line.long 0x0 "COMPONENTID2,Component ID2" hexmask.long.byte 0x0 0.--7. 1. " PRBL ,Preamble" rgroup c14:0x3ff--0x3ff line.long 0x0 "COMPONENTID3,Component ID3" hexmask.long.byte 0x0 0.--7. 1. " PRBL ,Preamble" tree.end textline " " width 0x7 rgroup c14:0x000--0x000 line.long 0x0 "DIDR,Debug ID Register" bitfld.long 0x0 28.--31. " WRP ,Number of Watchpoint Register Pairs" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x0 24.--27. " BRP ,Number of Breakpoint Register Pairs" "Reserved,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x0 20.--23. " CTX_CMP ,Number of BRPs with Context ID Comparison Capability" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x0 16.--19. " Version ,Debug Architecture Version" "Reserved,ARMv6,ARMv6.1,ARMv7,ARMv7 no ext.,?..." textline " " bitfld.long 0x0 15. " DEVID_IMP ,Debug Device ID Register DBGDEVID implemented" "Not implemented,Implemented" bitfld.long 0x0 14. " NSUHD_IMP ,Secure User halting debug implemented" "Not implemented,Implemented" textline " " bitfld.long 0x0 13. " PCSR_IMP ,Program Counter Sampling Register implemented" "Not implemented,Implemented" bitfld.long 0x0 12. " SE_IMP ,Security Extensions implemented" "Not implemented,Implemented" textline " " bitfld.long 0x0 4.--7. " Variant ,Implementation-defined Variant Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0 0.--3. " Revision ,Implementation-defined Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" width 0x7 group c14:0x22--0x22 line.long 0x0 "DSCR,Debug Status and Control Register" bitfld.long 0x0 30. " DTRRXfull ,The DTRRX Full Flag" "Empty,Full" bitfld.long 0x0 29. " DTRTXfull ,The DTRTX Full Flag" "Empty,Full" textline " " bitfld.long 0x00 27. " DTRRXfull_l ,The DTRRX Full Flag 1" "Empty,Full" bitfld.long 0x00 26. " DTRTXfull_l ,The DTRTX Full Flag 1" "Empty,Full" textline " " bitfld.long 0x0 25. " PIPEADV ,Sticky Pipeline Advance" "No effect,Instruction retired" bitfld.long 0x0 24. " INSTRCOMPL_L ,Latched Instruction Complete" "Executing,Not executing" textline " " bitfld.long 0x0 20.--21. " EXTDCCMODE ,External DCC access mode" "Non-blocking,Stall,Fast,?..." bitfld.long 0x0 19. " ADADISCARD ,Asynchronous Data Aborts Discarded" "Not discarded,Discarded" textline " " bitfld.long 0x0 18. " NS ,Non-secure World Status" "Secured,Not secured" bitfld.long 0x0 17. " SPNIDDIS ,Secure Privileged Non-Invasive Debug Disabled" "No,Yes" textline " " bitfld.long 0x0 16. " SPIDDIS ,Secure Privileged Invasive Debug Disabled" "No,Yes" bitfld.long 0x0 15. " MDBGEN ,Monitor Debug-mode enable" "Disabled,Enabled" textline " " bitfld.long 0x0 14. " HDEn ,Halting Debug-mode enable" "Disabled,Enabled" bitfld.long 0x0 13. " ITREN ,Execute ARM instruction enable" "Disabled,Enabled" textline " " bitfld.long 0x0 12. " UDCCDIS ,User mode access to Comms Channel disable" "No,Yes" bitfld.long 0x0 11. " IntDis ,Disable Interrupts" "No,Yes" textline " " bitfld.long 0x0 10. " DbgAck ,Force Debug Acknowledge" "Not forced,Forced" bitfld.long 0x0 8. " UND_l ,Sticky Undefined Instruction" "No exception,Exception" textline " " bitfld.long 0x0 7. " ADABORT_l ,Sticky Asynchronous Data Abort" "Not aborted,Aborted" bitfld.long 0x0 6. " SDABORT_l ,Sticky Synchronous Data Abort" "Not aborted,Aborted" textline " " bitfld.long 0x0 2.--5. " MOE ,Method of Debug Entry" "Halt request,Breakpoint,Asynchronous Watchpoint,BKPT instruction,External debug,Vector catch,Reserved,Reserved,OS Unlock,Reserved,Synchronous Watchpoint,?..." bitfld.long 0x0 1. " RESTARTED ,Core Restarted" "Debug not exited,Debug exited" textline " " bitfld.long 0x0 0. " HALTED ,Core Halted" "Normal state,Debug state" width 0x7 if (((data.long(c14:0x00))&0x01000)==0x00000) group c14:0x007--0x007 line.long 0x0 "VCR,Vector Catch Register" bitfld.long 0x0 7. " FIQ ,Vector Catch Enable FIQ" "Disabled,Enabled" bitfld.long 0x0 6. " IRQ ,Vector Catch Enable IRQ" "Disabled,Enabled" textline " " bitfld.long 0x0 4. " DABORT ,Vector Catch Enable Data Abort" "Disabled,Enabled" bitfld.long 0x0 3. " PABORT ,Vector Catch Enable Prefetch Abort" "Disabled,Enabled" textline " " bitfld.long 0x0 2. " SWI ,Vector Catch Enable SWI" "Disabled,Enabled" bitfld.long 0x0 1. " UNDEF ,Vector Catch Enable Undefined Instruction" "Disabled,Enabled" textline " " bitfld.long 0x0 0. " RESET ,Vector Catch Enable Reset" "Disabled,Enabled" else group c14:0x007--0x007 line.long 0x0 "VCR,Vector Catch Register" bitfld.long 0x0 31. " FIQN ,Vector Catch Enable FIQ (Non-secure)" "Disabled,Enabled" bitfld.long 0x0 30. " IRQN ,Vector Catch Enable IRQ (Non-secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 28. " DABORTN ,Vector Catch Enable Data Abort (Non-secure)" "Disabled,Enabled" bitfld.long 0x0 27. " PABORTN ,Vector Catch Enable Prefetch abort (Non-secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 26. " SWIN ,Vector Catch Enable SWI (Non-secure)" "Disabled,Enabled" bitfld.long 0x0 25. " UNDEFS ,Vector Catch Enable Undefined (Non-secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 15. " FIQS ,Vector Catch Enable FIQ (Secure)" "Disabled,Enabled" bitfld.long 0x0 14. " IRQS ,Vector Catch Enable IRQ (Secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 12. " DABORTS ,Vector Catch Enable Data Abort (Secure)" "Disabled,Enabled" bitfld.long 0x00 11. " PABORTS ,Vector Catch Enable Prefetch abort (Secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 10. " SMI ,Vector Catch Enable SMI (Secure)" "Disabled,Enabled" bitfld.long 0x0 7. " FIQ ,Vector Catch Enable FIQ" "Disabled,Enabled" textline " " bitfld.long 0x0 6. " IRQ ,Vector Catch Enable IRQ" "Disabled,Enabled" bitfld.long 0x0 4. " DABORT0 ,Vector Catch Enable Data Abort" "Disabled,Enabled" textline " " bitfld.long 0x0 3. " PABORT ,Vector Catch Enable Prefetch Abort" "Disabled,Enabled" bitfld.long 0x0 2. " SWI ,Vector Catch Enable SWI" "Disabled,Enabled" textline " " bitfld.long 0x0 1. " UNDEF ,Vector Catch Enable Undefined Instruction" "Disabled,Enabled" bitfld.long 0x0 0. " RESET ,Vector Catch Enable Reset" "Disabled,Enabled" endif ;rgroup c14:0x1++0x1 ; line.long 0x0 "DRAR,Debug ROM Address Register" ; hexmask.long 0x0 12.--31. 0x1000 " DBROMPA ,Debug bus ROM physical address" ; bitfld.long 0x0 0.--1. " VB ,Valid bits" "Not valid,Reserved,Reserved,Valid" ; line.long 0x4 "DSAR,Debug Self Address Offset Register" ; hexmask.long 0x4 12.--31. 0x1000 " DBSAOV ,Debug bus self-address offset value" ; bitfld.long 0x4 0.--1. " VB ,Valid bits" "Not valid,Reserved,Reserved,Valid" ;hgroup c14:0x50++0x0 ; hide.long 0x0 "DTR,Data Transfer Register" ; in width 0x7 hgroup c14:0x020--0x020 hide.long 0x0 "DTRRX,Target -> Host Data Transfer Register" in group c14:0x023--0x023 line.long 0x0 "DTRTX,Host -> Target Data Transfer Register" hexmask.long 0x00 0.--31. 1. " HTD ,Host -> target data" wgroup c14:0x21++0x00 line.long 0x00 "ITR,Instruction Transfer Register" hexmask.long 0x00 0.--31. 1. " Data ,ARM Instruction for the Processor in Debug State Execute" wgroup c14:0x24++0x00 line.long 0x00 "DRCR,Debug Run Control Register" bitfld.long 0x00 4. " CBIUR , Cancel Bus Interface Unit Requests" "Not canceled,Canceled" bitfld.long 0x00 3. " CSPA ,Clear Sticky Pipeline Advance" "Not cleared,Cleared" textline " " bitfld.long 0x00 2. " CSE ,Clear Sticky Exceptions" "Not cleared,Cleared" bitfld.long 0x00 1. " RR ,Restart Request" "Not requested,Requested" textline " " bitfld.long 0x00 0. " HR ,Halt Request" "Not requested,Requested" rgroup c14:0xc4++0x00 line.long 0x00 "PRCR,Device Power-Down and Reset Control Register" bitfld.long 0x00 2. " HNDLR ,Hold non-debug logic reset" "No reset,Reset" bitfld.long 0x00 1. " WRR ,Warm reset request" "Not requested,Requested" textline " " bitfld.long 0x00 0. " NPD ,No Power-Down" "DBGNOPWRDWN low,DBGNOPWRDWN high" hgroup c14:0xc5++0x00 hide.long 0x00 "PRSR,Device Power-Down and Reset Status Register" in tree.end width 6. tree "Breakpoint Registers" group c14:0x40++0x00 line.long 0x00 "BVR0,Breakpoint Value Register 0" hexmask.long 0x00 0.--31. 1. " BV0 ,Breakpoint Value 0" group c14:0x50++0x00 line.long 0x00 "BCR0,Breakpoint Control Register 0" bitfld.long 0x00 24.--28. " BAM ,Breakpoint Address Mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20.--22. " M ,BVR Meaning" "IVA match,Linked IVA match,Unlinked context ID,Linked context ID,IVA mismatch,Linked IVA mismatch,?..." bitfld.long 0x00 16.--19. " LBRP ,Linked BRP Number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x00 14.--15. " SSAC ,Secure state access control" "Both,Nonsecure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" bitfld.long 0x00 1.--2. " SP ,Supervisor Access Control" "User/system/supervisor,Privileged,User,Any" bitfld.long 0x00 0. " B ,Breakpoint Enable" "Disabled,Enabled" group c14:0x41++0x00 line.long 0x00 "BVR1,Breakpoint Value Register 1" hexmask.long 0x00 0.--31. 1. " BV1 ,Breakpoint Value 1" group c14:0x51++0x00 line.long 0x00 "BCR1,Breakpoint Control Register 1" bitfld.long 0x00 24.--28. " BAM ,Breakpoint Address Mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20.--22. " M ,BVR Meaning" "IVA match,Linked IVA match,Unlinked context ID,Linked context ID,IVA mismatch,Linked IVA mismatch,?..." bitfld.long 0x00 16.--19. " LBRP ,Linked BRP Number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x00 14.--15. " SSAC ,Secure state access control" "Both,Nonsecure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" bitfld.long 0x00 1.--2. " SP ,Supervisor Access Control" "User/system/supervisor,Privileged,User,Any" bitfld.long 0x00 0. " B ,Breakpoint Enable" "Disabled,Enabled" group c14:0x42++0x00 line.long 0x00 "BVR2,Breakpoint Value Register 2" hexmask.long 0x00 0.--31. 1. " BV2 ,Breakpoint Value 2" group c14:0x52++0x00 line.long 0x00 "BCR2,Breakpoint Control Register 2" bitfld.long 0x00 24.--28. " BAM ,Breakpoint Address Mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20.--22. " M ,BVR Meaning" "IVA match,Linked IVA match,Unlinked context ID,Linked context ID,IVA mismatch,Linked IVA mismatch,?..." bitfld.long 0x00 16.--19. " LBRP ,Linked BRP Number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x00 14.--15. " SSAC ,Secure state access control" "Both,Nonsecure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" bitfld.long 0x00 1.--2. " SP ,Supervisor Access Control" "User/system/supervisor,Privileged,User,Any" bitfld.long 0x00 0. " B ,Breakpoint Enable" "Disabled,Enabled" group c14:0x43++0x00 line.long 0x00 "BVR3,Breakpoint Value Register 3" hexmask.long 0x00 0.--31. 1. " BV3 ,Breakpoint Value 3" group c14:0x53++0x00 line.long 0x00 "BCR3,Breakpoint Control Register 3" bitfld.long 0x00 24.--28. " BAM ,Breakpoint Address Mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20.--22. " M ,BVR Meaning" "IVA match,Linked IVA match,Unlinked context ID,Linked context ID,IVA mismatch,Linked IVA mismatch,?..." bitfld.long 0x00 16.--19. " LBRP ,Linked BRP Number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x00 14.--15. " SSAC ,Secure state access control" "Both,Nonsecure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" bitfld.long 0x00 1.--2. " SP ,Supervisor Access Control" "User/system/supervisor,Privileged,User,Any" bitfld.long 0x00 0. " B ,Breakpoint Enable" "Disabled,Enabled" group c14:0x44++0x00 line.long 0x00 "BVR4,Breakpoint Value Register 4" hexmask.long 0x00 0.--31. 1. " BV4 ,Breakpoint Value 4" group c14:0x54++0x00 line.long 0x00 "BCR4,Breakpoint Control Register 4" bitfld.long 0x00 24.--28. " BAM ,Breakpoint Address Mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20.--22. " M ,BVR Meaning" "IVA match,Linked IVA match,Unlinked context ID,Linked context ID,IVA mismatch,Linked IVA mismatch,?..." bitfld.long 0x00 16.--19. " LBRP ,Linked BRP Number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x00 14.--15. " SSAC ,Secure state access control" "Both,Nonsecure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" bitfld.long 0x00 1.--2. " SP ,Supervisor Access Control" "User/system/supervisor,Privileged,User,Any" bitfld.long 0x00 0. " B ,Breakpoint Enable" "Disabled,Enabled" group c14:0x45++0x00 line.long 0x00 "BVR5,Breakpoint Value Register 5" hexmask.long 0x00 0.--31. 1. " BV5 ,Breakpoint Value 5" group c14:0x55++0x00 line.long 0x00 "BCR5,Breakpoint Control Register 5" bitfld.long 0x00 24.--28. " BAM ,Breakpoint Address Mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x00 20.--22. " M ,BVR Meaning" "IVA match,Linked IVA match,Unlinked context ID,Linked context ID,IVA mismatch,Linked IVA mismatch,?..." bitfld.long 0x00 16.--19. " LBRP ,Linked BRP Number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x00 14.--15. " SSAC ,Secure state access control" "Both,Nonsecure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" bitfld.long 0x00 1.--2. " SP ,Supervisor Access Control" "User/system/supervisor,Privileged,User,Any" bitfld.long 0x00 0. " B ,Breakpoint Enable" "Disabled,Enabled" tree.end width 6. tree "Watchpoint Control Registers" group c14:0x60++0x00 line.long 0x00 "WVR0,Watchpoint Value Register 0" hexmask.long 0x00 2.--31. 0x04 " WA0 ,Watchpoint Address 0" group c14:0x70--0x70 line.long 0x0 "WCR0,Watchpoint Control Register 0" bitfld.long 0x0 24.--28. " BAM ,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x0 20. " EL ,Enable Linking" "Disabled,Enabled" textline " " bitfld.long 0x0 16.--19. " LBN ,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x0 14.--15. " SWAC ,Secure world access control" "Non-secure & Secure,Non-secure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" textline " " bitfld.long 0x0 3.--4. " L/S ,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x0 1.--2. " PAC ,Privileged access control" "Reserved,Privileged,USR,Any" textline " " bitfld.long 0x0 0. " WE ,Watchpoint enable" "Disabled,Enabled" group c14:0x61++0x00 line.long 0x00 "WVR1,Watchpoint Value Register 1" hexmask.long 0x00 2.--31. 0x04 " WA1 ,Watchpoint Address 1" group c14:0x71--0x71 line.long 0x0 "WCR1,Watchpoint Control Register 1" bitfld.long 0x0 24.--28. " BAM ,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x0 20. " EL ,Enable Linking" "Disabled,Enabled" textline " " bitfld.long 0x0 16.--19. " LBN ,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x0 14.--15. " SWAC ,Secure world access control" "Non-secure & Secure,Non-secure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" textline " " bitfld.long 0x0 3.--4. " L/S ,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x0 1.--2. " PAC ,Privileged access control" "Reserved,Privileged,USR,Any" textline " " bitfld.long 0x0 0. " WE ,Watchpoint enable" "Disabled,Enabled" group c14:0x62++0x00 line.long 0x00 "WVR2,Watchpoint Value Register 2" hexmask.long 0x00 2.--31. 0x04 " WA2 ,Watchpoint Address 2" group c14:0x72--0x72 line.long 0x0 "WCR2,Watchpoint Control Register 2" bitfld.long 0x0 24.--28. " BAM ,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x0 20. " EL ,Enable Linking" "Disabled,Enabled" textline " " bitfld.long 0x0 16.--19. " LBN ,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x0 14.--15. " SWAC ,Secure world access control" "Non-secure & Secure,Non-secure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" textline " " bitfld.long 0x0 3.--4. " L/S ,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x0 1.--2. " PAC ,Privileged access control" "Reserved,Privileged,USR,Any" textline " " bitfld.long 0x0 0. " WE ,Watchpoint enable" "Disabled,Enabled" group c14:0x63++0x00 line.long 0x00 "WVR3,Watchpoint Value Register 3" hexmask.long 0x00 2.--31. 0x04 " WA3 ,Watchpoint Address 3" group c14:0x73--0x73 line.long 0x0 "WCR3,Watchpoint Control Register 3" bitfld.long 0x0 24.--28. " BAM ,Watchpoint address mask" "Not masked,Reserved,Reserved,0x7,0xF,0x1F,0x3F,0x7F,0xFF,0x1FF,0x3FF,0x7FF,0xFFF,0x1FFF,0x3FFF,0x7FFF,0xFFFF,0x1FFFF,0x3FFFF,0x7FFFF,0xFFFFF,0x1FFFFF,0x3FFFFF,0x7FFFFF,0xFFFFFF,0x1FFFFFF,0x3FFFFFF,0x7FFFFFF,0xFFFFFFF,0x1FFFFFFF,0x3FFFFFFF,0x7FFFFFFF" bitfld.long 0x0 20. " EL ,Enable Linking" "Disabled,Enabled" textline " " bitfld.long 0x0 16.--19. " LBN ,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x0 14.--15. " SWAC ,Secure world access control" "Non-secure & Secure,Non-secure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" textline " " bitfld.long 0x0 3.--4. " L/S ,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x0 1.--2. " PAC ,Privileged access control" "Reserved,Privileged,USR,Any" textline " " bitfld.long 0x0 0. " WE ,Watchpoint enable" "Disabled,Enabled" group c14:0x006--0x006 line.long 0x0 "WFAR,Watchpoint Fault Address Register" hexmask.long 0x00 1.--31. 0x02 " WFAR ,Address of the watchpointed instruction" tree.end width 0xb width 9. base ad:(d.l(c15:0x400f)) tree "Snoop Control Unit (SCU)" group.long 0x00++0x03 line.long 0x00 "SCUCR,SCU Control Register" bitfld.long 0x00 6. " ICSE ,IC standby enable" "Disabled,Enabled" bitfld.long 0x00 5. " SCUSE ,SCU standby enable" "Disabled,Enabled" bitfld.long 0x00 4. " FADTP0E ,Force all Device to port0 enable" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " SCUSLE ,SCU Speculative linefills enable" "Disabled,Enabled" bitfld.long 0x00 2. " SCURPE ,SCU RAMs Parity enable" "Disabled,Enabled" bitfld.long 0x00 1. " AFE ,Address filtering enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " SCUE ,SCU enable" "Disabled,Enabled" rgroup.long 0x04++0x03 line.long 0x00 "SCUCON,SCU Configuration Register" bitfld.long 0x00 14.--15. " RAM3 ,Cortex-A9 CPU3 Tag RAM Size" "16KB,32KB,64KB,?..." bitfld.long 0x00 12.--13. " RAM2 ,Cortex-A9 CPU2 Tag RAM Size" "16KB,32KB,64KB,?..." bitfld.long 0x00 10.--11. " RAM1 ,Cortex-A9 CPU1 Tag RAM Size" "16KB,32KB,64KB,?..." textline " " bitfld.long 0x00 8.--9. " RAM0 ,Cortex-A9 CPU0 Tag RAM Size" "16KB,32KB,64KB,?..." bitfld.long 0x00 7. " MOD3 ,CPU3 Mode" "AMP,SMP" bitfld.long 0x00 6. " MOD2 ,CPU2 Mode" "AMP,SMP" textline " " bitfld.long 0x00 5. " MOD1 ,CPU1 Mode" "AMP,SMP" bitfld.long 0x00 4. " MOD0 ,CPU0 Mode" "AMP,SMP" bitfld.long 0x00 0.--1. " NUM ,CPU Number" "CPU0,CPU0-CPU1,CPU0-CPU2,CPU0-CPU3" group.long 0x08++0x03 line.long 0x00 "SCUSTAT,SCU CPU Power Status Register" bitfld.long 0x00 24.--25. " STAT3 ,CPU3 Status" "Normal,Reserved,Dormant,Powered-off" bitfld.long 0x00 16.--17. " STAT2 ,CPU2 Status" "Normal,Reserved,Dormant,Powered-off" textline " " bitfld.long 0x00 8.--9. " STAT1 ,CPU1 Status" "Normal,Reserved,Dormant,Powered-off" bitfld.long 0x00 0.--1. " STAT0 ,CPU0 Status" "Normal,Reserved,Dormant,Powered-off" wgroup.long 0x0c++0x03 line.long 0x00 "INV,SCU Invalidate All Register" bitfld.long 0x00 12.--15. " WAY3 ,Cortex-A9 CPU3 Invalidated Ways" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " WAY2 ,Cortex-A9 CPU2 Invalidated Ways" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--7. " WAY1 ,Cortex-A9 CPU1 Invalidated Ways" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 0.--3. " WAY0 ,Cortex-A9 CPU0 Invalidated Ways" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x40++0x03 line.long 0x00 "FSAR,Filtering Start Address Register" hexmask.long.word 0x00 20.--31. 0x10 " FSA ,Filtering start address" group.long 0x44++0x03 line.long 0x00 "FEAR,Filtering End Address Register" hexmask.long.word 0x00 20.--31. 0x10 " FEA ,Filtering end address" group.long 0x50++0x03 line.long 0x00 "SAC,SCU Access Control Register" bitfld.long 0x00 3. " CPU3 ,CPU3 Access the SAC" "No access,Access" bitfld.long 0x00 2. " CPU2 ,CPU2 Access the SAC" "No access,Access" bitfld.long 0x00 1. " CPU1 ,CPU1 Access the SAC" "No access,Access" textline " " bitfld.long 0x00 0. " CPU0 ,CPU0 Access the SAC" "No access,Access" group.long 0x54++0x03 line.long 0x00 "SSAC,SCU Secure Access Control Register" bitfld.long 0x00 11. " GCPU3 ,Global timer for CPU3" "Secure only,Secure/Non-secure" bitfld.long 0x00 10. " GCPU2 ,Global timer for CPU2" "Secure only,Secure/Non-secure" bitfld.long 0x00 9. " GCPU1 ,Global timer for CPU1" "Secure only,Secure/Non-secure" textline " " bitfld.long 0x00 8. " GCPU0 ,Global timer for CPU0" "Secure only,Secure/Non-secure" bitfld.long 0x00 7. " TCPU3 ,Private timer for CPU3 Access" "Secure only,Secure/Non-secure" bitfld.long 0x00 6. " TCPU2 ,Private timer for CPU2 Access" "Secure only,Secure/Non-secure" textline " " bitfld.long 0x00 5. " TCPU1 ,Private timer for CPU1 Access" "Secure only,Secure/Non-secure" bitfld.long 0x00 4. " TCPU0 ,Private timer for CPU0 Access" "Secure only,Secure/Non-secure" bitfld.long 0x00 3. " CPU3 ,CPU3 Access the SAC" "No access,Access" textline " " bitfld.long 0x00 2. " CPU2 ,CPU2 Access the SAC" "No access,Access" bitfld.long 0x00 1. " CPU1 ,CPU1 Access the SAC" "No access,Access" bitfld.long 0x00 0. " CPU0 ,CPU0 Access the SAC" "No access,Access" tree.end width 0xb width 8. tree "Timer and Watchdog Blocks" base ad:(d.l(c15:0x400f))+0x600 group.long 0x00++0xb "Timer" line.long 0x00 "TLR,Timer Load Register" line.long 0x04 "TCR,Timer Counter Register" line.long 0x08 "TCONR,Timer Control Register" hexmask.long.byte 0x08 8.--15. 1. " PRES ,Prescaler" bitfld.long 0x08 2. " IRQEN ,IRQ Enable" "Disabled,Enabled" bitfld.long 0x08 1. " AREL ,Auto reload" "Single shot,Auto-reload" bitfld.long 0x08 0. " TEN ,Global Timer Enable" "Disabled,Enabled" group.long 0x0c++0x3 line.long 0x00 "TISR,Timer Interrupt Status Register" eventfld.long 0x00 0. " EFLAG ,Event Flag" "0,1" group.long 0x20++0x13 "Watchdog" line.long 0x00 "WLR,Watchdog Load Register" line.long 0x04 "WCR,Watchdog Counter Register" line.long 0x08 "WCONR,Watchdog Control Register" hexmask.long.byte 0x08 8.--15. 1. " PRES ,Prescaler" bitfld.long 0x08 3. " WDM ,WD Mode" "Timer,Watchdog" bitfld.long 0x08 2. " ITEN ,IT Enable" "Disabled,Enabled" bitfld.long 0x08 1. " AREL ,Auto-Reload" "Single shot,Auto-reload" textline " " bitfld.long 0x08 0. " WEN ,Watchdog Enable" "Disabled,Enabled" line.long 0x0c "WISR,Watchdog Interrupt Status Register" eventfld.long 0x0C 0. " EFLAG ,Event Flag" "0,1" line.long 0x10 "WRSR,Watchdog Reset Sent Register" eventfld.long 0x10 0. " RFLAG ,Reset Flag" "No effect,Reset" wgroup.long 0x34++0x3 line.long 0x00 "WDR,Watchdog Disable Register" base ad:(d.l(c15:0x400f))+0x200 group.long 0x00++0xb "Global Timer" line.long 0x00 "GTLCR,Lower 32-bit Timer Counter Register" line.long 0x04 "GTUCR,Upper 32-bit Timer Counter Register" line.long 0x08 "GTCONR,Timer Control Register" hexmask.long.byte 0x08 8.--15. 1. " PRES ,Prescaler" bitfld.long 0x08 3. " AINC ,Auto Increment" "Single shot,Auto increment" bitfld.long 0x08 2. " IRQEN ,IRQ Enable" "Disabled,Enabled" bitfld.long 0x08 1. " COMPEN ,Comp Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 0. " TEN ,Global Timer Enable" "Disabled,Enabled" group.long 0x0c++0x3 line.long 0x00 "GTSR,Timer Status Register" eventfld.long 0x00 0. " EFLAG ,Event Flag" "0,1" group.long 0x10++0xb line.long 0x00 "GTLCOMR,Lower 32-bit Comparator Register" line.long 0x04 "GTUCOMR,Upper 32-bit Comparator Register" line.long 0x08 "GTINCR,Auto-increment Register for Comparator" tree.end width 11. tree.open "Interrupt Controller (PL-390)" width 17. base AD:0xfffed000 tree "Distributor Interface" if (((d.l(AD:0xfffed000+0x04))&0x400)==0x400) group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register (Secure access)" bitfld.long 0x00 1. " ENABLEGRP1 ,Global Interrupt Enable Group 1" "Disabled,Enabled" bitfld.long 0x00 0. " ENABLEGRP0 ,Global Interrupt Enable Group 1" "Disabled,Enabled" else group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register" bitfld.long 0x00 0. " ENABLE ,Global enable for forwarding pending interrupts from the Distributor to the CPU interfaces" "Disabled,Enabled" endif if (((d.l(AD:0xfffed000+0x04))&0x400)==0x400) rgroup.long 0x0004++0x03 line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register" bitfld.long 0x00 11.--15. " LSPI ,Locable Shared Peripheral Interrupts" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10. " SECURITYEXTN ,Indicate whether interrupt controller implements the security extensions" "Not implemented,Implemented" textline " " bitfld.long 0x00 5.--7. " CPUNUMBER ,Indicates the number of implemented CPU interfaces" "1,2,3,4,?..." bitfld.long 0x00 0.--4. " ITLN ,Indicates the number of interrupts that the interrupt controller supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Up to 1020" else rgroup.long 0x0004++0x03 line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register" bitfld.long 0x00 10. " SECURITYEXTN ,Indicates whether interrupt controller implements the security extensions" "Not implemented,Implemented" textline " " bitfld.long 0x00 5.--7. " CPUNUMBER ,Indicates the number of implemented CPU interfaces" "1,2,3,4,?..." bitfld.long 0x00 0.--4. " ITLN ,Indicates the number of interrupts that the interrupt controller supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Up to 1020" endif rgroup.long 0x0008++0x03 line.long 0x00 "GICD_IIDR,Distributor Implementer Identification Register" bitfld.long 0x00 24.--31. " PRODID ,Indicates the product ID" "PL390,PL390,GIC400,GIC400,?..." hexmask.long.word 0x00 12.--23. 1. " REV_NUM ,Returns the revision number of the GIC" textline " " hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" sif CPU.FEATURE(hypervisor)||CPU.FEATURE(secure) width 17. tree "Group/Security Registers" group.long 0x0080++0x03 line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Non-secure access)" bitfld.long 0x00 31. " GSB31 ,Group Status Bit 31" "Group 0,Group 1" bitfld.long 0x00 30. " GSB30 ,Group Status Bit 30" "Group 0,Group 1" bitfld.long 0x00 29. " GSB29 ,Group Status Bit 29" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB28 ,Group Status Bit 28" "Group 0,Group 1" bitfld.long 0x00 27. " GSB27 ,Group Status Bit 27" "Group 0,Group 1" bitfld.long 0x00 26. " GSB26 ,Group Status Bit 26" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB25 ,Group Status Bit 25" "Group 0,Group 1" bitfld.long 0x00 24. " GSB24 ,Group Status Bit 24" "Group 0,Group 1" bitfld.long 0x00 23. " GSB23 ,Group Status Bit 23" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB22 ,Group Status Bit 22" "Group 0,Group 1" bitfld.long 0x00 21. " GSB21 ,Group Status Bit 21" "Group 0,Group 1" bitfld.long 0x00 20. " GSB20 ,Group Status Bit 20" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB19 ,Group Status Bit 19" "Group 0,Group 1" bitfld.long 0x00 18. " GSB18 ,Group Status Bit 18" "Group 0,Group 1" bitfld.long 0x00 17. " GSB17 ,Group Status Bit 17" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB16 ,Group Status Bit 16" "Group 0,Group 1" bitfld.long 0x00 15. " GSB15 ,Group Status Bit 15" "Group 0,Group 1" bitfld.long 0x00 14. " GSB14 ,Group Status Bit 14" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB13 ,Group Status Bit 13" "Group 0,Group 1" bitfld.long 0x00 12. " GSB12 ,Group Status Bit 12" "Group 0,Group 1" bitfld.long 0x00 11. " GSB11 ,Group Status Bit 11" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB10 ,Group Status Bit 10" "Group 0,Group 1" bitfld.long 0x00 9. " GSB9 ,Group Status Bit 9" "Group 0,Group 1" bitfld.long 0x00 8. " GSB8 ,Group Status Bit 8" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB7 ,Group Status Bit 7" "Group 0,Group 1" bitfld.long 0x00 6. " GSB6 ,Group Status Bit 6" "Group 0,Group 1" bitfld.long 0x00 5. " GSB5 ,Group Status Bit 5" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB4 ,Group Status Bit 4" "Group 0,Group 1" bitfld.long 0x00 3. " GSB3 ,Group Status Bit 3" "Group 0,Group 1" bitfld.long 0x00 2. " GSB2 ,Group Status Bit 2" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB1 ,Group Status Bit 1" "Group 0,Group 1" bitfld.long 0x00 0. " GSB0 ,Group Status Bit 0" "Group 0,Group 1" if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x01) group.long 0x0084++0x03 line.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1 (Non-secure access)" bitfld.long 0x00 31. " GSB63 ,Group Status Bit 63" "Group 0,Group 1" bitfld.long 0x00 30. " GSB62 ,Group Status Bit 62" "Group 0,Group 1" bitfld.long 0x00 29. " GSB61 ,Group Status Bit 61" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB60 ,Group Status Bit 60" "Group 0,Group 1" bitfld.long 0x00 27. " GSB59 ,Group Status Bit 59" "Group 0,Group 1" bitfld.long 0x00 26. " GSB58 ,Group Status Bit 58" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB57 ,Group Status Bit 57" "Group 0,Group 1" bitfld.long 0x00 24. " GSB56 ,Group Status Bit 56" "Group 0,Group 1" bitfld.long 0x00 23. " GSB55 ,Group Status Bit 55" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB54 ,Group Status Bit 54" "Group 0,Group 1" bitfld.long 0x00 21. " GSB53 ,Group Status Bit 53" "Group 0,Group 1" bitfld.long 0x00 20. " GSB52 ,Group Status Bit 52" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB51 ,Group Status Bit 51" "Group 0,Group 1" bitfld.long 0x00 18. " GSB50 ,Group Status Bit 50" "Group 0,Group 1" bitfld.long 0x00 17. " GSB49 ,Group Status Bit 49" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB48 ,Group Status Bit 48" "Group 0,Group 1" bitfld.long 0x00 15. " GSB47 ,Group Status Bit 47" "Group 0,Group 1" bitfld.long 0x00 14. " GSB46 ,Group Status Bit 46" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB45 ,Group Status Bit 45" "Group 0,Group 1" bitfld.long 0x00 12. " GSB44 ,Group Status Bit 44" "Group 0,Group 1" bitfld.long 0x00 11. " GSB43 ,Group Status Bit 43" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB42 ,Group Status Bit 42" "Group 0,Group 1" bitfld.long 0x00 9. " GSB41 ,Group Status Bit 41" "Group 0,Group 1" bitfld.long 0x00 8. " GSB40 ,Group Status Bit 40" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB39 ,Group Status Bit 39" "Group 0,Group 1" bitfld.long 0x00 6. " GSB38 ,Group Status Bit 38" "Group 0,Group 1" bitfld.long 0x00 5. " GSB37 ,Group Status Bit 37" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB36 ,Group Status Bit 36" "Group 0,Group 1" bitfld.long 0x00 3. " GSB35 ,Group Status Bit 35" "Group 0,Group 1" bitfld.long 0x00 2. " GSB34 ,Group Status Bit 34" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB33 ,Group Status Bit 33" "Group 0,Group 1" bitfld.long 0x00 0. " GSB32 ,Group Status Bit 32" "Group 0,Group 1" else hgroup.long 0x0084++0x03 hide.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x02) group.long 0x0088++0x03 line.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2 (Non-secure access)" bitfld.long 0x00 31. " GSB95 ,Group Status Bit 95" "Group 0,Group 1" bitfld.long 0x00 30. " GSB94 ,Group Status Bit 94" "Group 0,Group 1" bitfld.long 0x00 29. " GSB93 ,Group Status Bit 93" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB92 ,Group Status Bit 92" "Group 0,Group 1" bitfld.long 0x00 27. " GSB91 ,Group Status Bit 91" "Group 0,Group 1" bitfld.long 0x00 26. " GSB90 ,Group Status Bit 90" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB89 ,Group Status Bit 89" "Group 0,Group 1" bitfld.long 0x00 24. " GSB88 ,Group Status Bit 88" "Group 0,Group 1" bitfld.long 0x00 23. " GSB87 ,Group Status Bit 87" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB86 ,Group Status Bit 86" "Group 0,Group 1" bitfld.long 0x00 21. " GSB85 ,Group Status Bit 85" "Group 0,Group 1" bitfld.long 0x00 20. " GSB84 ,Group Status Bit 84" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB83 ,Group Status Bit 83" "Group 0,Group 1" bitfld.long 0x00 18. " GSB82 ,Group Status Bit 82" "Group 0,Group 1" bitfld.long 0x00 17. " GSB81 ,Group Status Bit 81" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB80 ,Group Status Bit 80" "Group 0,Group 1" bitfld.long 0x00 15. " GSB79 ,Group Status Bit 79" "Group 0,Group 1" bitfld.long 0x00 14. " GSB78 ,Group Status Bit 78" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB77 ,Group Status Bit 77" "Group 0,Group 1" bitfld.long 0x00 12. " GSB76 ,Group Status Bit 76" "Group 0,Group 1" bitfld.long 0x00 11. " GSB75 ,Group Status Bit 75" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB74 ,Group Status Bit 74" "Group 0,Group 1" bitfld.long 0x00 9. " GSB73 ,Group Status Bit 73" "Group 0,Group 1" bitfld.long 0x00 8. " GSB72 ,Group Status Bit 72" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB71 ,Group Status Bit 71" "Group 0,Group 1" bitfld.long 0x00 6. " GSB70 ,Group Status Bit 70" "Group 0,Group 1" bitfld.long 0x00 5. " GSB69 ,Group Status Bit 69" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB68 ,Group Status Bit 68" "Group 0,Group 1" bitfld.long 0x00 3. " GSB67 ,Group Status Bit 67" "Group 0,Group 1" bitfld.long 0x00 2. " GSB66 ,Group Status Bit 66" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB65 ,Group Status Bit 65" "Group 0,Group 1" bitfld.long 0x00 0. " GSB64 ,Group Status Bit 64" "Group 0,Group 1" else hgroup.long 0x0088++0x03 hide.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x03) group.long 0x008C++0x03 line.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3 (Non-secure access)" bitfld.long 0x00 31. " GSB127 ,Group Status Bit 127" "Group 0,Group 1" bitfld.long 0x00 30. " GSB126 ,Group Status Bit 126" "Group 0,Group 1" bitfld.long 0x00 29. " GSB125 ,Group Status Bit 125" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB124 ,Group Status Bit 124" "Group 0,Group 1" bitfld.long 0x00 27. " GSB123 ,Group Status Bit 123" "Group 0,Group 1" bitfld.long 0x00 26. " GSB122 ,Group Status Bit 122" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB121 ,Group Status Bit 121" "Group 0,Group 1" bitfld.long 0x00 24. " GSB120 ,Group Status Bit 120" "Group 0,Group 1" bitfld.long 0x00 23. " GSB119 ,Group Status Bit 119" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB118 ,Group Status Bit 118" "Group 0,Group 1" bitfld.long 0x00 21. " GSB117 ,Group Status Bit 117" "Group 0,Group 1" bitfld.long 0x00 20. " GSB116 ,Group Status Bit 116" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB115 ,Group Status Bit 115" "Group 0,Group 1" bitfld.long 0x00 18. " GSB114 ,Group Status Bit 114" "Group 0,Group 1" bitfld.long 0x00 17. " GSB113 ,Group Status Bit 113" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB112 ,Group Status Bit 112" "Group 0,Group 1" bitfld.long 0x00 15. " GSB111 ,Group Status Bit 111" "Group 0,Group 1" bitfld.long 0x00 14. " GSB110 ,Group Status Bit 110" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB109 ,Group Status Bit 109" "Group 0,Group 1" bitfld.long 0x00 12. " GSB108 ,Group Status Bit 108" "Group 0,Group 1" bitfld.long 0x00 11. " GSB107 ,Group Status Bit 107" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB106 ,Group Status Bit 106" "Group 0,Group 1" bitfld.long 0x00 9. " GSB105 ,Group Status Bit 105" "Group 0,Group 1" bitfld.long 0x00 8. " GSB104 ,Group Status Bit 104" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB103 ,Group Status Bit 103" "Group 0,Group 1" bitfld.long 0x00 6. " GSB102 ,Group Status Bit 102" "Group 0,Group 1" bitfld.long 0x00 5. " GSB101 ,Group Status Bit 101" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB100 ,Group Status Bit 100" "Group 0,Group 1" bitfld.long 0x00 3. " GSB99 ,Group Status Bit 99" "Group 0,Group 1" bitfld.long 0x00 2. " GSB98 ,Group Status Bit 98" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB97 ,Group Status Bit 97" "Group 0,Group 1" bitfld.long 0x00 0. " GSB96 ,Group Status Bit 96" "Group 0,Group 1" else hgroup.long 0x008C++0x03 hide.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x04) group.long 0x0090++0x03 line.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4 (Non-secure access)" bitfld.long 0x00 31. " GSB159 ,Group Status Bit 159" "Group 0,Group 1" bitfld.long 0x00 30. " GSB158 ,Group Status Bit 158" "Group 0,Group 1" bitfld.long 0x00 29. " GSB157 ,Group Status Bit 157" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB156 ,Group Status Bit 156" "Group 0,Group 1" bitfld.long 0x00 27. " GSB155 ,Group Status Bit 155" "Group 0,Group 1" bitfld.long 0x00 26. " GSB154 ,Group Status Bit 154" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB153 ,Group Status Bit 153" "Group 0,Group 1" bitfld.long 0x00 24. " GSB152 ,Group Status Bit 152" "Group 0,Group 1" bitfld.long 0x00 23. " GSB151 ,Group Status Bit 151" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB150 ,Group Status Bit 150" "Group 0,Group 1" bitfld.long 0x00 21. " GSB149 ,Group Status Bit 149" "Group 0,Group 1" bitfld.long 0x00 20. " GSB148 ,Group Status Bit 148" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB147 ,Group Status Bit 147" "Group 0,Group 1" bitfld.long 0x00 18. " GSB146 ,Group Status Bit 146" "Group 0,Group 1" bitfld.long 0x00 17. " GSB145 ,Group Status Bit 145" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB144 ,Group Status Bit 144" "Group 0,Group 1" bitfld.long 0x00 15. " GSB143 ,Group Status Bit 143" "Group 0,Group 1" bitfld.long 0x00 14. " GSB142 ,Group Status Bit 142" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB141 ,Group Status Bit 141" "Group 0,Group 1" bitfld.long 0x00 12. " GSB140 ,Group Status Bit 140" "Group 0,Group 1" bitfld.long 0x00 11. " GSB139 ,Group Status Bit 139" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB138 ,Group Status Bit 138" "Group 0,Group 1" bitfld.long 0x00 9. " GSB137 ,Group Status Bit 137" "Group 0,Group 1" bitfld.long 0x00 8. " GSB136 ,Group Status Bit 136" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB135 ,Group Status Bit 135" "Group 0,Group 1" bitfld.long 0x00 6. " GSB134 ,Group Status Bit 134" "Group 0,Group 1" bitfld.long 0x00 5. " GSB133 ,Group Status Bit 133" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB132 ,Group Status Bit 132" "Group 0,Group 1" bitfld.long 0x00 3. " GSB131 ,Group Status Bit 131" "Group 0,Group 1" bitfld.long 0x00 2. " GSB130 ,Group Status Bit 130" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB129 ,Group Status Bit 129" "Group 0,Group 1" bitfld.long 0x00 0. " GSB128 ,Group Status Bit 128" "Group 0,Group 1" else hgroup.long 0x0090++0x03 hide.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x05) group.long 0x0094++0x03 line.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5 (Non-secure access)" bitfld.long 0x00 31. " GSB191 ,Group Status Bit 191" "Group 0,Group 1" bitfld.long 0x00 30. " GSB190 ,Group Status Bit 190" "Group 0,Group 1" bitfld.long 0x00 29. " GSB189 ,Group Status Bit 189" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB188 ,Group Status Bit 188" "Group 0,Group 1" bitfld.long 0x00 27. " GSB187 ,Group Status Bit 187" "Group 0,Group 1" bitfld.long 0x00 26. " GSB186 ,Group Status Bit 186" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB185 ,Group Status Bit 185" "Group 0,Group 1" bitfld.long 0x00 24. " GSB184 ,Group Status Bit 184" "Group 0,Group 1" bitfld.long 0x00 23. " GSB183 ,Group Status Bit 183" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB182 ,Group Status Bit 182" "Group 0,Group 1" bitfld.long 0x00 21. " GSB181 ,Group Status Bit 181" "Group 0,Group 1" bitfld.long 0x00 20. " GSB180 ,Group Status Bit 180" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB179 ,Group Status Bit 179" "Group 0,Group 1" bitfld.long 0x00 18. " GSB178 ,Group Status Bit 178" "Group 0,Group 1" bitfld.long 0x00 17. " GSB177 ,Group Status Bit 177" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB176 ,Group Status Bit 176" "Group 0,Group 1" bitfld.long 0x00 15. " GSB175 ,Group Status Bit 175" "Group 0,Group 1" bitfld.long 0x00 14. " GSB174 ,Group Status Bit 174" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB173 ,Group Status Bit 173" "Group 0,Group 1" bitfld.long 0x00 12. " GSB172 ,Group Status Bit 172" "Group 0,Group 1" bitfld.long 0x00 11. " GSB171 ,Group Status Bit 171" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB170 ,Group Status Bit 170" "Group 0,Group 1" bitfld.long 0x00 9. " GSB169 ,Group Status Bit 169" "Group 0,Group 1" bitfld.long 0x00 8. " GSB168 ,Group Status Bit 168" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB167 ,Group Status Bit 167" "Group 0,Group 1" bitfld.long 0x00 6. " GSB166 ,Group Status Bit 166" "Group 0,Group 1" bitfld.long 0x00 5. " GSB165 ,Group Status Bit 165" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB164 ,Group Status Bit 164" "Group 0,Group 1" bitfld.long 0x00 3. " GSB163 ,Group Status Bit 163" "Group 0,Group 1" bitfld.long 0x00 2. " GSB162 ,Group Status Bit 162" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB161 ,Group Status Bit 161" "Group 0,Group 1" bitfld.long 0x00 0. " GSB160 ,Group Status Bit 160" "Group 0,Group 1" else hgroup.long 0x0094++0x03 hide.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x06) group.long 0x0098++0x03 line.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6 (Non-secure access)" bitfld.long 0x00 31. " GSB223 ,Group Status Bit 223" "Group 0,Group 1" bitfld.long 0x00 30. " GSB222 ,Group Status Bit 222" "Group 0,Group 1" bitfld.long 0x00 29. " GSB221 ,Group Status Bit 221" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB220 ,Group Status Bit 220" "Group 0,Group 1" bitfld.long 0x00 27. " GSB219 ,Group Status Bit 219" "Group 0,Group 1" bitfld.long 0x00 26. " GSB218 ,Group Status Bit 218" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB217 ,Group Status Bit 217" "Group 0,Group 1" bitfld.long 0x00 24. " GSB216 ,Group Status Bit 216" "Group 0,Group 1" bitfld.long 0x00 23. " GSB215 ,Group Status Bit 215" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB214 ,Group Status Bit 214" "Group 0,Group 1" bitfld.long 0x00 21. " GSB213 ,Group Status Bit 213" "Group 0,Group 1" bitfld.long 0x00 20. " GSB212 ,Group Status Bit 212" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB211 ,Group Status Bit 211" "Group 0,Group 1" bitfld.long 0x00 18. " GSB210 ,Group Status Bit 210" "Group 0,Group 1" bitfld.long 0x00 17. " GSB209 ,Group Status Bit 209" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB208 ,Group Status Bit 208" "Group 0,Group 1" bitfld.long 0x00 15. " GSB207 ,Group Status Bit 207" "Group 0,Group 1" bitfld.long 0x00 14. " GSB206 ,Group Status Bit 206" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB205 ,Group Status Bit 205" "Group 0,Group 1" bitfld.long 0x00 12. " GSB204 ,Group Status Bit 204" "Group 0,Group 1" bitfld.long 0x00 11. " GSB203 ,Group Status Bit 203" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB202 ,Group Status Bit 202" "Group 0,Group 1" bitfld.long 0x00 9. " GSB201 ,Group Status Bit 201" "Group 0,Group 1" bitfld.long 0x00 8. " GSB200 ,Group Status Bit 200" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB199 ,Group Status Bit 199" "Group 0,Group 1" bitfld.long 0x00 6. " GSB198 ,Group Status Bit 198" "Group 0,Group 1" bitfld.long 0x00 5. " GSB197 ,Group Status Bit 197" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB196 ,Group Status Bit 196" "Group 0,Group 1" bitfld.long 0x00 3. " GSB195 ,Group Status Bit 195" "Group 0,Group 1" bitfld.long 0x00 2. " GSB194 ,Group Status Bit 194" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB193 ,Group Status Bit 193" "Group 0,Group 1" bitfld.long 0x00 0. " GSB192 ,Group Status Bit 192" "Group 0,Group 1" else hgroup.long 0x0098++0x03 hide.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x07) group.long 0x009C++0x03 line.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7 (Non-secure access)" bitfld.long 0x00 31. " GSB255 ,Group Status Bit 255" "Group 0,Group 1" bitfld.long 0x00 30. " GSB254 ,Group Status Bit 254" "Group 0,Group 1" bitfld.long 0x00 29. " GSB253 ,Group Status Bit 253" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB252 ,Group Status Bit 252" "Group 0,Group 1" bitfld.long 0x00 27. " GSB251 ,Group Status Bit 251" "Group 0,Group 1" bitfld.long 0x00 26. " GSB250 ,Group Status Bit 250" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB249 ,Group Status Bit 249" "Group 0,Group 1" bitfld.long 0x00 24. " GSB248 ,Group Status Bit 248" "Group 0,Group 1" bitfld.long 0x00 23. " GSB247 ,Group Status Bit 247" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB246 ,Group Status Bit 246" "Group 0,Group 1" bitfld.long 0x00 21. " GSB245 ,Group Status Bit 245" "Group 0,Group 1" bitfld.long 0x00 20. " GSB244 ,Group Status Bit 244" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB243 ,Group Status Bit 243" "Group 0,Group 1" bitfld.long 0x00 18. " GSB242 ,Group Status Bit 242" "Group 0,Group 1" bitfld.long 0x00 17. " GSB241 ,Group Status Bit 241" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB240 ,Group Status Bit 240" "Group 0,Group 1" bitfld.long 0x00 15. " GSB239 ,Group Status Bit 239" "Group 0,Group 1" bitfld.long 0x00 14. " GSB238 ,Group Status Bit 238" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB237 ,Group Status Bit 237" "Group 0,Group 1" bitfld.long 0x00 12. " GSB236 ,Group Status Bit 236" "Group 0,Group 1" bitfld.long 0x00 11. " GSB235 ,Group Status Bit 235" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB234 ,Group Status Bit 234" "Group 0,Group 1" bitfld.long 0x00 9. " GSB233 ,Group Status Bit 233" "Group 0,Group 1" bitfld.long 0x00 8. " GSB232 ,Group Status Bit 232" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB231 ,Group Status Bit 231" "Group 0,Group 1" bitfld.long 0x00 6. " GSB230 ,Group Status Bit 230" "Group 0,Group 1" bitfld.long 0x00 5. " GSB229 ,Group Status Bit 229" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB228 ,Group Status Bit 228" "Group 0,Group 1" bitfld.long 0x00 3. " GSB227 ,Group Status Bit 227" "Group 0,Group 1" bitfld.long 0x00 2. " GSB226 ,Group Status Bit 226" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB225 ,Group Status Bit 225" "Group 0,Group 1" bitfld.long 0x00 0. " GSB224 ,Group Status Bit 224" "Group 0,Group 1" else hgroup.long 0x009C++0x03 hide.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x08) group.long 0x00A0++0x03 line.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8 (Non-secure access)" bitfld.long 0x00 31. " GSB287 ,Group Status Bit 287" "Group 0,Group 1" bitfld.long 0x00 30. " GSB286 ,Group Status Bit 286" "Group 0,Group 1" bitfld.long 0x00 29. " GSB285 ,Group Status Bit 285" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB284 ,Group Status Bit 284" "Group 0,Group 1" bitfld.long 0x00 27. " GSB283 ,Group Status Bit 283" "Group 0,Group 1" bitfld.long 0x00 26. " GSB282 ,Group Status Bit 282" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB281 ,Group Status Bit 281" "Group 0,Group 1" bitfld.long 0x00 24. " GSB280 ,Group Status Bit 280" "Group 0,Group 1" bitfld.long 0x00 23. " GSB279 ,Group Status Bit 279" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB278 ,Group Status Bit 278" "Group 0,Group 1" bitfld.long 0x00 21. " GSB277 ,Group Status Bit 277" "Group 0,Group 1" bitfld.long 0x00 20. " GSB276 ,Group Status Bit 276" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB275 ,Group Status Bit 275" "Group 0,Group 1" bitfld.long 0x00 18. " GSB274 ,Group Status Bit 274" "Group 0,Group 1" bitfld.long 0x00 17. " GSB273 ,Group Status Bit 273" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB272 ,Group Status Bit 272" "Group 0,Group 1" bitfld.long 0x00 15. " GSB271 ,Group Status Bit 271" "Group 0,Group 1" bitfld.long 0x00 14. " GSB270 ,Group Status Bit 270" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB269 ,Group Status Bit 269" "Group 0,Group 1" bitfld.long 0x00 12. " GSB268 ,Group Status Bit 268" "Group 0,Group 1" bitfld.long 0x00 11. " GSB267 ,Group Status Bit 267" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB266 ,Group Status Bit 266" "Group 0,Group 1" bitfld.long 0x00 9. " GSB265 ,Group Status Bit 265" "Group 0,Group 1" bitfld.long 0x00 8. " GSB264 ,Group Status Bit 264" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB263 ,Group Status Bit 263" "Group 0,Group 1" bitfld.long 0x00 6. " GSB262 ,Group Status Bit 262" "Group 0,Group 1" bitfld.long 0x00 5. " GSB261 ,Group Status Bit 261" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB260 ,Group Status Bit 260" "Group 0,Group 1" bitfld.long 0x00 3. " GSB259 ,Group Status Bit 259" "Group 0,Group 1" bitfld.long 0x00 2. " GSB258 ,Group Status Bit 258" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB257 ,Group Status Bit 257" "Group 0,Group 1" bitfld.long 0x00 0. " GSB256 ,Group Status Bit 256" "Group 0,Group 1" else hgroup.long 0x00A0++0x03 hide.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x09) group.long 0x00A4++0x03 line.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9 (Non-secure access)" bitfld.long 0x00 31. " GSB319 ,Group Status Bit 319" "Group 0,Group 1" bitfld.long 0x00 30. " GSB318 ,Group Status Bit 318" "Group 0,Group 1" bitfld.long 0x00 29. " GSB317 ,Group Status Bit 317" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB316 ,Group Status Bit 316" "Group 0,Group 1" bitfld.long 0x00 27. " GSB315 ,Group Status Bit 315" "Group 0,Group 1" bitfld.long 0x00 26. " GSB314 ,Group Status Bit 314" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB313 ,Group Status Bit 313" "Group 0,Group 1" bitfld.long 0x00 24. " GSB312 ,Group Status Bit 312" "Group 0,Group 1" bitfld.long 0x00 23. " GSB311 ,Group Status Bit 311" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB310 ,Group Status Bit 310" "Group 0,Group 1" bitfld.long 0x00 21. " GSB309 ,Group Status Bit 309" "Group 0,Group 1" bitfld.long 0x00 20. " GSB308 ,Group Status Bit 308" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB307 ,Group Status Bit 307" "Group 0,Group 1" bitfld.long 0x00 18. " GSB306 ,Group Status Bit 306" "Group 0,Group 1" bitfld.long 0x00 17. " GSB305 ,Group Status Bit 305" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB304 ,Group Status Bit 304" "Group 0,Group 1" bitfld.long 0x00 15. " GSB303 ,Group Status Bit 303" "Group 0,Group 1" bitfld.long 0x00 14. " GSB302 ,Group Status Bit 302" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB301 ,Group Status Bit 301" "Group 0,Group 1" bitfld.long 0x00 12. " GSB300 ,Group Status Bit 300" "Group 0,Group 1" bitfld.long 0x00 11. " GSB299 ,Group Status Bit 299" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB298 ,Group Status Bit 298" "Group 0,Group 1" bitfld.long 0x00 9. " GSB297 ,Group Status Bit 297" "Group 0,Group 1" bitfld.long 0x00 8. " GSB296 ,Group Status Bit 296" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB295 ,Group Status Bit 295" "Group 0,Group 1" bitfld.long 0x00 6. " GSB294 ,Group Status Bit 294" "Group 0,Group 1" bitfld.long 0x00 5. " GSB293 ,Group Status Bit 293" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB292 ,Group Status Bit 292" "Group 0,Group 1" bitfld.long 0x00 3. " GSB291 ,Group Status Bit 291" "Group 0,Group 1" bitfld.long 0x00 2. " GSB290 ,Group Status Bit 290" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB289 ,Group Status Bit 289" "Group 0,Group 1" bitfld.long 0x00 0. " GSB288 ,Group Status Bit 288" "Group 0,Group 1" else hgroup.long 0x00A4++0x03 hide.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0A) group.long 0x00A8++0x03 line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10 (Non-secure access)" bitfld.long 0x00 31. " GSB351 ,Group Status Bit 351" "Group 0,Group 1" bitfld.long 0x00 30. " GSB350 ,Group Status Bit 350" "Group 0,Group 1" bitfld.long 0x00 29. " GSB349 ,Group Status Bit 349" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB348 ,Group Status Bit 348" "Group 0,Group 1" bitfld.long 0x00 27. " GSB347 ,Group Status Bit 347" "Group 0,Group 1" bitfld.long 0x00 26. " GSB346 ,Group Status Bit 346" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB345 ,Group Status Bit 345" "Group 0,Group 1" bitfld.long 0x00 24. " GSB344 ,Group Status Bit 344" "Group 0,Group 1" bitfld.long 0x00 23. " GSB343 ,Group Status Bit 343" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB342 ,Group Status Bit 342" "Group 0,Group 1" bitfld.long 0x00 21. " GSB341 ,Group Status Bit 341" "Group 0,Group 1" bitfld.long 0x00 20. " GSB340 ,Group Status Bit 340" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB339 ,Group Status Bit 339" "Group 0,Group 1" bitfld.long 0x00 18. " GSB338 ,Group Status Bit 338" "Group 0,Group 1" bitfld.long 0x00 17. " GSB337 ,Group Status Bit 337" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB336 ,Group Status Bit 336" "Group 0,Group 1" bitfld.long 0x00 15. " GSB335 ,Group Status Bit 335" "Group 0,Group 1" bitfld.long 0x00 14. " GSB334 ,Group Status Bit 334" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB333 ,Group Status Bit 333" "Group 0,Group 1" bitfld.long 0x00 12. " GSB332 ,Group Status Bit 332" "Group 0,Group 1" bitfld.long 0x00 11. " GSB331 ,Group Status Bit 331" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB330 ,Group Status Bit 330" "Group 0,Group 1" bitfld.long 0x00 9. " GSB329 ,Group Status Bit 329" "Group 0,Group 1" bitfld.long 0x00 8. " GSB328 ,Group Status Bit 328" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB327 ,Group Status Bit 327" "Group 0,Group 1" bitfld.long 0x00 6. " GSB326 ,Group Status Bit 326" "Group 0,Group 1" bitfld.long 0x00 5. " GSB325 ,Group Status Bit 325" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB324 ,Group Status Bit 324" "Group 0,Group 1" bitfld.long 0x00 3. " GSB323 ,Group Status Bit 323" "Group 0,Group 1" bitfld.long 0x00 2. " GSB322 ,Group Status Bit 322" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB321 ,Group Status Bit 321" "Group 0,Group 1" bitfld.long 0x00 0. " GSB320 ,Group Status Bit 320" "Group 0,Group 1" else hgroup.long 0x00A8++0x03 hide.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0B) group.long 0x00AC++0x03 line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11 (Non-secure access)" bitfld.long 0x00 31. " GSB383 ,Group Status Bit 383" "Group 0,Group 1" bitfld.long 0x00 30. " GSB382 ,Group Status Bit 382" "Group 0,Group 1" bitfld.long 0x00 29. " GSB381 ,Group Status Bit 381" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB380 ,Group Status Bit 380" "Group 0,Group 1" bitfld.long 0x00 27. " GSB379 ,Group Status Bit 379" "Group 0,Group 1" bitfld.long 0x00 26. " GSB378 ,Group Status Bit 378" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB377 ,Group Status Bit 377" "Group 0,Group 1" bitfld.long 0x00 24. " GSB376 ,Group Status Bit 376" "Group 0,Group 1" bitfld.long 0x00 23. " GSB375 ,Group Status Bit 375" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB374 ,Group Status Bit 374" "Group 0,Group 1" bitfld.long 0x00 21. " GSB373 ,Group Status Bit 373" "Group 0,Group 1" bitfld.long 0x00 20. " GSB372 ,Group Status Bit 372" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB371 ,Group Status Bit 371" "Group 0,Group 1" bitfld.long 0x00 18. " GSB370 ,Group Status Bit 370" "Group 0,Group 1" bitfld.long 0x00 17. " GSB369 ,Group Status Bit 369" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB368 ,Group Status Bit 368" "Group 0,Group 1" bitfld.long 0x00 15. " GSB367 ,Group Status Bit 367" "Group 0,Group 1" bitfld.long 0x00 14. " GSB366 ,Group Status Bit 366" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB365 ,Group Status Bit 365" "Group 0,Group 1" bitfld.long 0x00 12. " GSB364 ,Group Status Bit 364" "Group 0,Group 1" bitfld.long 0x00 11. " GSB363 ,Group Status Bit 363" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB362 ,Group Status Bit 362" "Group 0,Group 1" bitfld.long 0x00 9. " GSB361 ,Group Status Bit 361" "Group 0,Group 1" bitfld.long 0x00 8. " GSB360 ,Group Status Bit 360" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB359 ,Group Status Bit 359" "Group 0,Group 1" bitfld.long 0x00 6. " GSB358 ,Group Status Bit 358" "Group 0,Group 1" bitfld.long 0x00 5. " GSB357 ,Group Status Bit 357" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB356 ,Group Status Bit 356" "Group 0,Group 1" bitfld.long 0x00 3. " GSB355 ,Group Status Bit 355" "Group 0,Group 1" bitfld.long 0x00 2. " GSB354 ,Group Status Bit 354" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB353 ,Group Status Bit 353" "Group 0,Group 1" bitfld.long 0x00 0. " GSB352 ,Group Status Bit 352" "Group 0,Group 1" else hgroup.long 0x00AC++0x03 hide.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0C) group.long 0x00B0++0x03 line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12 (Non-secure access)" bitfld.long 0x00 31. " GSB415 ,Group Status Bit 415" "Group 0,Group 1" bitfld.long 0x00 30. " GSB414 ,Group Status Bit 414" "Group 0,Group 1" bitfld.long 0x00 29. " GSB413 ,Group Status Bit 413" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB412 ,Group Status Bit 412" "Group 0,Group 1" bitfld.long 0x00 27. " GSB411 ,Group Status Bit 411" "Group 0,Group 1" bitfld.long 0x00 26. " GSB410 ,Group Status Bit 410" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB409 ,Group Status Bit 409" "Group 0,Group 1" bitfld.long 0x00 24. " GSB408 ,Group Status Bit 408" "Group 0,Group 1" bitfld.long 0x00 23. " GSB407 ,Group Status Bit 407" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB406 ,Group Status Bit 406" "Group 0,Group 1" bitfld.long 0x00 21. " GSB405 ,Group Status Bit 405" "Group 0,Group 1" bitfld.long 0x00 20. " GSB404 ,Group Status Bit 404" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB403 ,Group Status Bit 403" "Group 0,Group 1" bitfld.long 0x00 18. " GSB402 ,Group Status Bit 402" "Group 0,Group 1" bitfld.long 0x00 17. " GSB401 ,Group Status Bit 401" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB400 ,Group Status Bit 400" "Group 0,Group 1" bitfld.long 0x00 15. " GSB399 ,Group Status Bit 399" "Group 0,Group 1" bitfld.long 0x00 14. " GSB398 ,Group Status Bit 398" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB397 ,Group Status Bit 397" "Group 0,Group 1" bitfld.long 0x00 12. " GSB396 ,Group Status Bit 396" "Group 0,Group 1" bitfld.long 0x00 11. " GSB395 ,Group Status Bit 395" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB394 ,Group Status Bit 394" "Group 0,Group 1" bitfld.long 0x00 9. " GSB393 ,Group Status Bit 393" "Group 0,Group 1" bitfld.long 0x00 8. " GSB392 ,Group Status Bit 392" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB391 ,Group Status Bit 391" "Group 0,Group 1" bitfld.long 0x00 6. " GSB390 ,Group Status Bit 390" "Group 0,Group 1" bitfld.long 0x00 5. " GSB389 ,Group Status Bit 389" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB388 ,Group Status Bit 388" "Group 0,Group 1" bitfld.long 0x00 3. " GSB387 ,Group Status Bit 387" "Group 0,Group 1" bitfld.long 0x00 2. " GSB386 ,Group Status Bit 386" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB385 ,Group Status Bit 385" "Group 0,Group 1" bitfld.long 0x00 0. " GSB384 ,Group Status Bit 384" "Group 0,Group 1" else hgroup.long 0x00B0++0x03 hide.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0D) group.long 0x00B4++0x03 line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13 (Non-secure access)" bitfld.long 0x00 31. " GSB447 ,Group Status Bit 447" "Group 0,Group 1" bitfld.long 0x00 30. " GSB446 ,Group Status Bit 446" "Group 0,Group 1" bitfld.long 0x00 29. " GSB445 ,Group Status Bit 445" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB444 ,Group Status Bit 444" "Group 0,Group 1" bitfld.long 0x00 27. " GSB443 ,Group Status Bit 443" "Group 0,Group 1" bitfld.long 0x00 26. " GSB442 ,Group Status Bit 442" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB441 ,Group Status Bit 441" "Group 0,Group 1" bitfld.long 0x00 24. " GSB440 ,Group Status Bit 440" "Group 0,Group 1" bitfld.long 0x00 23. " GSB439 ,Group Status Bit 439" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB438 ,Group Status Bit 438" "Group 0,Group 1" bitfld.long 0x00 21. " GSB437 ,Group Status Bit 437" "Group 0,Group 1" bitfld.long 0x00 20. " GSB436 ,Group Status Bit 436" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB435 ,Group Status Bit 435" "Group 0,Group 1" bitfld.long 0x00 18. " GSB434 ,Group Status Bit 434" "Group 0,Group 1" bitfld.long 0x00 17. " GSB433 ,Group Status Bit 433" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB432 ,Group Status Bit 432" "Group 0,Group 1" bitfld.long 0x00 15. " GSB431 ,Group Status Bit 431" "Group 0,Group 1" bitfld.long 0x00 14. " GSB430 ,Group Status Bit 430" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB429 ,Group Status Bit 429" "Group 0,Group 1" bitfld.long 0x00 12. " GSB428 ,Group Status Bit 428" "Group 0,Group 1" bitfld.long 0x00 11. " GSB427 ,Group Status Bit 427" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB426 ,Group Status Bit 426" "Group 0,Group 1" bitfld.long 0x00 9. " GSB425 ,Group Status Bit 425" "Group 0,Group 1" bitfld.long 0x00 8. " GSB424 ,Group Status Bit 424" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB423 ,Group Status Bit 423" "Group 0,Group 1" bitfld.long 0x00 6. " GSB422 ,Group Status Bit 422" "Group 0,Group 1" bitfld.long 0x00 5. " GSB421 ,Group Status Bit 421" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB420 ,Group Status Bit 420" "Group 0,Group 1" bitfld.long 0x00 3. " GSB419 ,Group Status Bit 419" "Group 0,Group 1" bitfld.long 0x00 2. " GSB418 ,Group Status Bit 418" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB417 ,Group Status Bit 417" "Group 0,Group 1" bitfld.long 0x00 0. " GSB416 ,Group Status Bit 416" "Group 0,Group 1" else hgroup.long 0x00B4++0x03 hide.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0E) group.long 0x00B8++0x03 line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14 (Non-secure access)" bitfld.long 0x00 31. " GSB479 ,Group Status Bit 479" "Group 0,Group 1" bitfld.long 0x00 30. " GSB478 ,Group Status Bit 478" "Group 0,Group 1" bitfld.long 0x00 29. " GSB477 ,Group Status Bit 477" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB476 ,Group Status Bit 476" "Group 0,Group 1" bitfld.long 0x00 27. " GSB475 ,Group Status Bit 475" "Group 0,Group 1" bitfld.long 0x00 26. " GSB474 ,Group Status Bit 474" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB473 ,Group Status Bit 473" "Group 0,Group 1" bitfld.long 0x00 24. " GSB472 ,Group Status Bit 472" "Group 0,Group 1" bitfld.long 0x00 23. " GSB471 ,Group Status Bit 471" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB470 ,Group Status Bit 470" "Group 0,Group 1" bitfld.long 0x00 21. " GSB469 ,Group Status Bit 469" "Group 0,Group 1" bitfld.long 0x00 20. " GSB468 ,Group Status Bit 468" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB467 ,Group Status Bit 467" "Group 0,Group 1" bitfld.long 0x00 18. " GSB466 ,Group Status Bit 466" "Group 0,Group 1" bitfld.long 0x00 17. " GSB465 ,Group Status Bit 465" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB464 ,Group Status Bit 464" "Group 0,Group 1" bitfld.long 0x00 15. " GSB463 ,Group Status Bit 463" "Group 0,Group 1" bitfld.long 0x00 14. " GSB462 ,Group Status Bit 462" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB461 ,Group Status Bit 461" "Group 0,Group 1" bitfld.long 0x00 12. " GSB460 ,Group Status Bit 460" "Group 0,Group 1" bitfld.long 0x00 11. " GSB459 ,Group Status Bit 459" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB458 ,Group Status Bit 458" "Group 0,Group 1" bitfld.long 0x00 9. " GSB457 ,Group Status Bit 457" "Group 0,Group 1" bitfld.long 0x00 8. " GSB456 ,Group Status Bit 456" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB455 ,Group Status Bit 455" "Group 0,Group 1" bitfld.long 0x00 6. " GSB454 ,Group Status Bit 454" "Group 0,Group 1" bitfld.long 0x00 5. " GSB453 ,Group Status Bit 453" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB452 ,Group Status Bit 452" "Group 0,Group 1" bitfld.long 0x00 3. " GSB451 ,Group Status Bit 451" "Group 0,Group 1" bitfld.long 0x00 2. " GSB450 ,Group Status Bit 450" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB449 ,Group Status Bit 449" "Group 0,Group 1" bitfld.long 0x00 0. " GSB448 ,Group Status Bit 448" "Group 0,Group 1" else hgroup.long 0x00B8++0x03 hide.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0F) group.long 0x00BC++0x03 line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15 (Non-secure access)" bitfld.long 0x00 31. " GSB511 ,Group Status Bit 511" "Group 0,Group 1" bitfld.long 0x00 30. " GSB510 ,Group Status Bit 510" "Group 0,Group 1" bitfld.long 0x00 29. " GSB509 ,Group Status Bit 509" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB508 ,Group Status Bit 508" "Group 0,Group 1" bitfld.long 0x00 27. " GSB507 ,Group Status Bit 507" "Group 0,Group 1" bitfld.long 0x00 26. " GSB506 ,Group Status Bit 506" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB505 ,Group Status Bit 505" "Group 0,Group 1" bitfld.long 0x00 24. " GSB504 ,Group Status Bit 504" "Group 0,Group 1" bitfld.long 0x00 23. " GSB503 ,Group Status Bit 503" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB502 ,Group Status Bit 502" "Group 0,Group 1" bitfld.long 0x00 21. " GSB501 ,Group Status Bit 501" "Group 0,Group 1" bitfld.long 0x00 20. " GSB500 ,Group Status Bit 500" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB499 ,Group Status Bit 499" "Group 0,Group 1" bitfld.long 0x00 18. " GSB498 ,Group Status Bit 498" "Group 0,Group 1" bitfld.long 0x00 17. " GSB497 ,Group Status Bit 497" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB496 ,Group Status Bit 496" "Group 0,Group 1" bitfld.long 0x00 15. " GSB495 ,Group Status Bit 495" "Group 0,Group 1" bitfld.long 0x00 14. " GSB494 ,Group Status Bit 494" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB493 ,Group Status Bit 493" "Group 0,Group 1" bitfld.long 0x00 12. " GSB492 ,Group Status Bit 492" "Group 0,Group 1" bitfld.long 0x00 11. " GSB491 ,Group Status Bit 491" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB490 ,Group Status Bit 490" "Group 0,Group 1" bitfld.long 0x00 9. " GSB489 ,Group Status Bit 489" "Group 0,Group 1" bitfld.long 0x00 8. " GSB488 ,Group Status Bit 488" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB487 ,Group Status Bit 487" "Group 0,Group 1" bitfld.long 0x00 6. " GSB486 ,Group Status Bit 486" "Group 0,Group 1" bitfld.long 0x00 5. " GSB485 ,Group Status Bit 485" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB484 ,Group Status Bit 484" "Group 0,Group 1" bitfld.long 0x00 3. " GSB483 ,Group Status Bit 483" "Group 0,Group 1" bitfld.long 0x00 2. " GSB482 ,Group Status Bit 482" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB481 ,Group Status Bit 481" "Group 0,Group 1" bitfld.long 0x00 0. " GSB480 ,Group Status Bit 480" "Group 0,Group 1" else hgroup.long 0x00BC++0x03 hide.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x10) group.long 0x00C0++0x03 line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16 (Non-secure access)" bitfld.long 0x00 31. " GSB543 ,Group Status Bit 543" "Group 0,Group 1" bitfld.long 0x00 30. " GSB542 ,Group Status Bit 542" "Group 0,Group 1" bitfld.long 0x00 29. " GSB541 ,Group Status Bit 541" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB540 ,Group Status Bit 540" "Group 0,Group 1" bitfld.long 0x00 27. " GSB539 ,Group Status Bit 539" "Group 0,Group 1" bitfld.long 0x00 26. " GSB538 ,Group Status Bit 538" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB537 ,Group Status Bit 537" "Group 0,Group 1" bitfld.long 0x00 24. " GSB536 ,Group Status Bit 536" "Group 0,Group 1" bitfld.long 0x00 23. " GSB535 ,Group Status Bit 535" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB534 ,Group Status Bit 534" "Group 0,Group 1" bitfld.long 0x00 21. " GSB533 ,Group Status Bit 533" "Group 0,Group 1" bitfld.long 0x00 20. " GSB532 ,Group Status Bit 532" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB531 ,Group Status Bit 531" "Group 0,Group 1" bitfld.long 0x00 18. " GSB530 ,Group Status Bit 530" "Group 0,Group 1" bitfld.long 0x00 17. " GSB529 ,Group Status Bit 529" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB528 ,Group Status Bit 528" "Group 0,Group 1" bitfld.long 0x00 15. " GSB527 ,Group Status Bit 527" "Group 0,Group 1" bitfld.long 0x00 14. " GSB526 ,Group Status Bit 526" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB525 ,Group Status Bit 525" "Group 0,Group 1" bitfld.long 0x00 12. " GSB524 ,Group Status Bit 524" "Group 0,Group 1" bitfld.long 0x00 11. " GSB523 ,Group Status Bit 523" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB522 ,Group Status Bit 522" "Group 0,Group 1" bitfld.long 0x00 9. " GSB521 ,Group Status Bit 521" "Group 0,Group 1" bitfld.long 0x00 8. " GSB520 ,Group Status Bit 520" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB519 ,Group Status Bit 519" "Group 0,Group 1" bitfld.long 0x00 6. " GSB518 ,Group Status Bit 518" "Group 0,Group 1" bitfld.long 0x00 5. " GSB517 ,Group Status Bit 517" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB516 ,Group Status Bit 516" "Group 0,Group 1" bitfld.long 0x00 3. " GSB515 ,Group Status Bit 515" "Group 0,Group 1" bitfld.long 0x00 2. " GSB514 ,Group Status Bit 514" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB513 ,Group Status Bit 513" "Group 0,Group 1" bitfld.long 0x00 0. " GSB512 ,Group Status Bit 512" "Group 0,Group 1" else hgroup.long 0x00C0++0x03 hide.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x11) group.long 0x00C4++0x03 line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17 (Non-secure access)" bitfld.long 0x00 31. " GSB575 ,Group Status Bit 575" "Group 0,Group 1" bitfld.long 0x00 30. " GSB574 ,Group Status Bit 574" "Group 0,Group 1" bitfld.long 0x00 29. " GSB573 ,Group Status Bit 573" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB572 ,Group Status Bit 572" "Group 0,Group 1" bitfld.long 0x00 27. " GSB571 ,Group Status Bit 571" "Group 0,Group 1" bitfld.long 0x00 26. " GSB570 ,Group Status Bit 570" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB569 ,Group Status Bit 569" "Group 0,Group 1" bitfld.long 0x00 24. " GSB568 ,Group Status Bit 568" "Group 0,Group 1" bitfld.long 0x00 23. " GSB567 ,Group Status Bit 567" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB566 ,Group Status Bit 566" "Group 0,Group 1" bitfld.long 0x00 21. " GSB565 ,Group Status Bit 565" "Group 0,Group 1" bitfld.long 0x00 20. " GSB564 ,Group Status Bit 564" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB563 ,Group Status Bit 563" "Group 0,Group 1" bitfld.long 0x00 18. " GSB562 ,Group Status Bit 562" "Group 0,Group 1" bitfld.long 0x00 17. " GSB561 ,Group Status Bit 561" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB560 ,Group Status Bit 560" "Group 0,Group 1" bitfld.long 0x00 15. " GSB559 ,Group Status Bit 559" "Group 0,Group 1" bitfld.long 0x00 14. " GSB558 ,Group Status Bit 558" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB557 ,Group Status Bit 557" "Group 0,Group 1" bitfld.long 0x00 12. " GSB556 ,Group Status Bit 556" "Group 0,Group 1" bitfld.long 0x00 11. " GSB555 ,Group Status Bit 555" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB554 ,Group Status Bit 554" "Group 0,Group 1" bitfld.long 0x00 9. " GSB553 ,Group Status Bit 553" "Group 0,Group 1" bitfld.long 0x00 8. " GSB552 ,Group Status Bit 552" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB551 ,Group Status Bit 551" "Group 0,Group 1" bitfld.long 0x00 6. " GSB550 ,Group Status Bit 550" "Group 0,Group 1" bitfld.long 0x00 5. " GSB549 ,Group Status Bit 549" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB548 ,Group Status Bit 548" "Group 0,Group 1" bitfld.long 0x00 3. " GSB547 ,Group Status Bit 547" "Group 0,Group 1" bitfld.long 0x00 2. " GSB546 ,Group Status Bit 546" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB545 ,Group Status Bit 545" "Group 0,Group 1" bitfld.long 0x00 0. " GSB544 ,Group Status Bit 544" "Group 0,Group 1" else hgroup.long 0x00C4++0x03 hide.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x12) group.long 0x00C8++0x03 line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18 (Non-secure access)" bitfld.long 0x00 31. " GSB607 ,Group Status Bit 607" "Group 0,Group 1" bitfld.long 0x00 30. " GSB606 ,Group Status Bit 606" "Group 0,Group 1" bitfld.long 0x00 29. " GSB605 ,Group Status Bit 605" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB604 ,Group Status Bit 604" "Group 0,Group 1" bitfld.long 0x00 27. " GSB603 ,Group Status Bit 603" "Group 0,Group 1" bitfld.long 0x00 26. " GSB602 ,Group Status Bit 602" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB601 ,Group Status Bit 601" "Group 0,Group 1" bitfld.long 0x00 24. " GSB600 ,Group Status Bit 600" "Group 0,Group 1" bitfld.long 0x00 23. " GSB599 ,Group Status Bit 599" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB598 ,Group Status Bit 598" "Group 0,Group 1" bitfld.long 0x00 21. " GSB597 ,Group Status Bit 597" "Group 0,Group 1" bitfld.long 0x00 20. " GSB596 ,Group Status Bit 596" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB595 ,Group Status Bit 595" "Group 0,Group 1" bitfld.long 0x00 18. " GSB594 ,Group Status Bit 594" "Group 0,Group 1" bitfld.long 0x00 17. " GSB593 ,Group Status Bit 593" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB592 ,Group Status Bit 592" "Group 0,Group 1" bitfld.long 0x00 15. " GSB591 ,Group Status Bit 591" "Group 0,Group 1" bitfld.long 0x00 14. " GSB590 ,Group Status Bit 590" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB589 ,Group Status Bit 589" "Group 0,Group 1" bitfld.long 0x00 12. " GSB588 ,Group Status Bit 588" "Group 0,Group 1" bitfld.long 0x00 11. " GSB587 ,Group Status Bit 587" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB586 ,Group Status Bit 586" "Group 0,Group 1" bitfld.long 0x00 9. " GSB585 ,Group Status Bit 585" "Group 0,Group 1" bitfld.long 0x00 8. " GSB584 ,Group Status Bit 584" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB583 ,Group Status Bit 583" "Group 0,Group 1" bitfld.long 0x00 6. " GSB582 ,Group Status Bit 582" "Group 0,Group 1" bitfld.long 0x00 5. " GSB581 ,Group Status Bit 581" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB580 ,Group Status Bit 580" "Group 0,Group 1" bitfld.long 0x00 3. " GSB579 ,Group Status Bit 579" "Group 0,Group 1" bitfld.long 0x00 2. " GSB578 ,Group Status Bit 578" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB577 ,Group Status Bit 577" "Group 0,Group 1" bitfld.long 0x00 0. " GSB576 ,Group Status Bit 576" "Group 0,Group 1" else hgroup.long 0x00C8++0x03 hide.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x13) group.long 0x00CC++0x03 line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19 (Non-secure access)" bitfld.long 0x00 31. " GSB639 ,Group Status Bit 639" "Group 0,Group 1" bitfld.long 0x00 30. " GSB638 ,Group Status Bit 638" "Group 0,Group 1" bitfld.long 0x00 29. " GSB637 ,Group Status Bit 637" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB636 ,Group Status Bit 636" "Group 0,Group 1" bitfld.long 0x00 27. " GSB635 ,Group Status Bit 635" "Group 0,Group 1" bitfld.long 0x00 26. " GSB634 ,Group Status Bit 634" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB633 ,Group Status Bit 633" "Group 0,Group 1" bitfld.long 0x00 24. " GSB632 ,Group Status Bit 632" "Group 0,Group 1" bitfld.long 0x00 23. " GSB631 ,Group Status Bit 631" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB630 ,Group Status Bit 630" "Group 0,Group 1" bitfld.long 0x00 21. " GSB629 ,Group Status Bit 629" "Group 0,Group 1" bitfld.long 0x00 20. " GSB628 ,Group Status Bit 628" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB627 ,Group Status Bit 627" "Group 0,Group 1" bitfld.long 0x00 18. " GSB626 ,Group Status Bit 626" "Group 0,Group 1" bitfld.long 0x00 17. " GSB625 ,Group Status Bit 625" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB624 ,Group Status Bit 624" "Group 0,Group 1" bitfld.long 0x00 15. " GSB623 ,Group Status Bit 623" "Group 0,Group 1" bitfld.long 0x00 14. " GSB622 ,Group Status Bit 622" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB621 ,Group Status Bit 621" "Group 0,Group 1" bitfld.long 0x00 12. " GSB620 ,Group Status Bit 620" "Group 0,Group 1" bitfld.long 0x00 11. " GSB619 ,Group Status Bit 619" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB618 ,Group Status Bit 618" "Group 0,Group 1" bitfld.long 0x00 9. " GSB617 ,Group Status Bit 617" "Group 0,Group 1" bitfld.long 0x00 8. " GSB616 ,Group Status Bit 616" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB615 ,Group Status Bit 615" "Group 0,Group 1" bitfld.long 0x00 6. " GSB614 ,Group Status Bit 614" "Group 0,Group 1" bitfld.long 0x00 5. " GSB613 ,Group Status Bit 613" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB612 ,Group Status Bit 612" "Group 0,Group 1" bitfld.long 0x00 3. " GSB611 ,Group Status Bit 611" "Group 0,Group 1" bitfld.long 0x00 2. " GSB610 ,Group Status Bit 610" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB609 ,Group Status Bit 609" "Group 0,Group 1" bitfld.long 0x00 0. " GSB608 ,Group Status Bit 608" "Group 0,Group 1" else hgroup.long 0x00CC++0x03 hide.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x14) group.long 0x00D0++0x03 line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20 (Non-secure access)" bitfld.long 0x00 31. " GSB671 ,Group Status Bit 671" "Group 0,Group 1" bitfld.long 0x00 30. " GSB670 ,Group Status Bit 670" "Group 0,Group 1" bitfld.long 0x00 29. " GSB669 ,Group Status Bit 669" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB668 ,Group Status Bit 668" "Group 0,Group 1" bitfld.long 0x00 27. " GSB667 ,Group Status Bit 667" "Group 0,Group 1" bitfld.long 0x00 26. " GSB666 ,Group Status Bit 666" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB665 ,Group Status Bit 665" "Group 0,Group 1" bitfld.long 0x00 24. " GSB664 ,Group Status Bit 664" "Group 0,Group 1" bitfld.long 0x00 23. " GSB663 ,Group Status Bit 663" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB662 ,Group Status Bit 662" "Group 0,Group 1" bitfld.long 0x00 21. " GSB661 ,Group Status Bit 661" "Group 0,Group 1" bitfld.long 0x00 20. " GSB660 ,Group Status Bit 660" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB659 ,Group Status Bit 659" "Group 0,Group 1" bitfld.long 0x00 18. " GSB658 ,Group Status Bit 658" "Group 0,Group 1" bitfld.long 0x00 17. " GSB657 ,Group Status Bit 657" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB656 ,Group Status Bit 656" "Group 0,Group 1" bitfld.long 0x00 15. " GSB655 ,Group Status Bit 655" "Group 0,Group 1" bitfld.long 0x00 14. " GSB654 ,Group Status Bit 654" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB653 ,Group Status Bit 653" "Group 0,Group 1" bitfld.long 0x00 12. " GSB652 ,Group Status Bit 652" "Group 0,Group 1" bitfld.long 0x00 11. " GSB651 ,Group Status Bit 651" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB650 ,Group Status Bit 650" "Group 0,Group 1" bitfld.long 0x00 9. " GSB649 ,Group Status Bit 649" "Group 0,Group 1" bitfld.long 0x00 8. " GSB648 ,Group Status Bit 648" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB647 ,Group Status Bit 647" "Group 0,Group 1" bitfld.long 0x00 6. " GSB646 ,Group Status Bit 646" "Group 0,Group 1" bitfld.long 0x00 5. " GSB645 ,Group Status Bit 645" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB644 ,Group Status Bit 644" "Group 0,Group 1" bitfld.long 0x00 3. " GSB643 ,Group Status Bit 643" "Group 0,Group 1" bitfld.long 0x00 2. " GSB642 ,Group Status Bit 642" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB641 ,Group Status Bit 641" "Group 0,Group 1" bitfld.long 0x00 0. " GSB640 ,Group Status Bit 640" "Group 0,Group 1" else hgroup.long 0x00D0++0x03 hide.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x15) group.long 0x00D4++0x03 line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21 (Non-secure access)" bitfld.long 0x00 31. " GSB703 ,Group Status Bit 703" "Group 0,Group 1" bitfld.long 0x00 30. " GSB702 ,Group Status Bit 702" "Group 0,Group 1" bitfld.long 0x00 29. " GSB701 ,Group Status Bit 701" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB700 ,Group Status Bit 700" "Group 0,Group 1" bitfld.long 0x00 27. " GSB699 ,Group Status Bit 699" "Group 0,Group 1" bitfld.long 0x00 26. " GSB698 ,Group Status Bit 698" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB697 ,Group Status Bit 697" "Group 0,Group 1" bitfld.long 0x00 24. " GSB696 ,Group Status Bit 696" "Group 0,Group 1" bitfld.long 0x00 23. " GSB695 ,Group Status Bit 695" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB694 ,Group Status Bit 694" "Group 0,Group 1" bitfld.long 0x00 21. " GSB693 ,Group Status Bit 693" "Group 0,Group 1" bitfld.long 0x00 20. " GSB692 ,Group Status Bit 692" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB691 ,Group Status Bit 691" "Group 0,Group 1" bitfld.long 0x00 18. " GSB690 ,Group Status Bit 690" "Group 0,Group 1" bitfld.long 0x00 17. " GSB689 ,Group Status Bit 689" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB688 ,Group Status Bit 688" "Group 0,Group 1" bitfld.long 0x00 15. " GSB687 ,Group Status Bit 687" "Group 0,Group 1" bitfld.long 0x00 14. " GSB686 ,Group Status Bit 686" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB685 ,Group Status Bit 685" "Group 0,Group 1" bitfld.long 0x00 12. " GSB684 ,Group Status Bit 684" "Group 0,Group 1" bitfld.long 0x00 11. " GSB683 ,Group Status Bit 683" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB682 ,Group Status Bit 682" "Group 0,Group 1" bitfld.long 0x00 9. " GSB681 ,Group Status Bit 681" "Group 0,Group 1" bitfld.long 0x00 8. " GSB680 ,Group Status Bit 680" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB679 ,Group Status Bit 679" "Group 0,Group 1" bitfld.long 0x00 6. " GSB678 ,Group Status Bit 678" "Group 0,Group 1" bitfld.long 0x00 5. " GSB677 ,Group Status Bit 677" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB676 ,Group Status Bit 676" "Group 0,Group 1" bitfld.long 0x00 3. " GSB675 ,Group Status Bit 675" "Group 0,Group 1" bitfld.long 0x00 2. " GSB674 ,Group Status Bit 674" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB673 ,Group Status Bit 673" "Group 0,Group 1" bitfld.long 0x00 0. " GSB672 ,Group Status Bit 672" "Group 0,Group 1" else hgroup.long 0x00D4++0x03 hide.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x16) group.long 0x00D8++0x03 line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22 (Non-secure access)" bitfld.long 0x00 31. " GSB735 ,Group Status Bit 735" "Group 0,Group 1" bitfld.long 0x00 30. " GSB734 ,Group Status Bit 734" "Group 0,Group 1" bitfld.long 0x00 29. " GSB733 ,Group Status Bit 733" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB732 ,Group Status Bit 732" "Group 0,Group 1" bitfld.long 0x00 27. " GSB731 ,Group Status Bit 731" "Group 0,Group 1" bitfld.long 0x00 26. " GSB730 ,Group Status Bit 730" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB729 ,Group Status Bit 729" "Group 0,Group 1" bitfld.long 0x00 24. " GSB728 ,Group Status Bit 728" "Group 0,Group 1" bitfld.long 0x00 23. " GSB727 ,Group Status Bit 727" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB726 ,Group Status Bit 726" "Group 0,Group 1" bitfld.long 0x00 21. " GSB725 ,Group Status Bit 725" "Group 0,Group 1" bitfld.long 0x00 20. " GSB724 ,Group Status Bit 724" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB723 ,Group Status Bit 723" "Group 0,Group 1" bitfld.long 0x00 18. " GSB722 ,Group Status Bit 722" "Group 0,Group 1" bitfld.long 0x00 17. " GSB721 ,Group Status Bit 721" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB720 ,Group Status Bit 720" "Group 0,Group 1" bitfld.long 0x00 15. " GSB719 ,Group Status Bit 719" "Group 0,Group 1" bitfld.long 0x00 14. " GSB718 ,Group Status Bit 718" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB717 ,Group Status Bit 717" "Group 0,Group 1" bitfld.long 0x00 12. " GSB716 ,Group Status Bit 716" "Group 0,Group 1" bitfld.long 0x00 11. " GSB715 ,Group Status Bit 715" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB714 ,Group Status Bit 714" "Group 0,Group 1" bitfld.long 0x00 9. " GSB713 ,Group Status Bit 713" "Group 0,Group 1" bitfld.long 0x00 8. " GSB712 ,Group Status Bit 712" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB711 ,Group Status Bit 711" "Group 0,Group 1" bitfld.long 0x00 6. " GSB710 ,Group Status Bit 710" "Group 0,Group 1" bitfld.long 0x00 5. " GSB709 ,Group Status Bit 709" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB708 ,Group Status Bit 708" "Group 0,Group 1" bitfld.long 0x00 3. " GSB707 ,Group Status Bit 707" "Group 0,Group 1" bitfld.long 0x00 2. " GSB706 ,Group Status Bit 706" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB705 ,Group Status Bit 705" "Group 0,Group 1" bitfld.long 0x00 0. " GSB704 ,Group Status Bit 704" "Group 0,Group 1" else hgroup.long 0x00D8++0x03 hide.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x17) group.long 0x00DC++0x03 line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23 (Non-secure access)" bitfld.long 0x00 31. " GSB767 ,Group Status Bit 767" "Group 0,Group 1" bitfld.long 0x00 30. " GSB766 ,Group Status Bit 766" "Group 0,Group 1" bitfld.long 0x00 29. " GSB765 ,Group Status Bit 765" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB764 ,Group Status Bit 764" "Group 0,Group 1" bitfld.long 0x00 27. " GSB763 ,Group Status Bit 763" "Group 0,Group 1" bitfld.long 0x00 26. " GSB762 ,Group Status Bit 762" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB761 ,Group Status Bit 761" "Group 0,Group 1" bitfld.long 0x00 24. " GSB760 ,Group Status Bit 760" "Group 0,Group 1" bitfld.long 0x00 23. " GSB759 ,Group Status Bit 759" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB758 ,Group Status Bit 758" "Group 0,Group 1" bitfld.long 0x00 21. " GSB757 ,Group Status Bit 757" "Group 0,Group 1" bitfld.long 0x00 20. " GSB756 ,Group Status Bit 756" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB755 ,Group Status Bit 755" "Group 0,Group 1" bitfld.long 0x00 18. " GSB754 ,Group Status Bit 754" "Group 0,Group 1" bitfld.long 0x00 17. " GSB753 ,Group Status Bit 753" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB752 ,Group Status Bit 752" "Group 0,Group 1" bitfld.long 0x00 15. " GSB751 ,Group Status Bit 751" "Group 0,Group 1" bitfld.long 0x00 14. " GSB750 ,Group Status Bit 750" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB749 ,Group Status Bit 749" "Group 0,Group 1" bitfld.long 0x00 12. " GSB748 ,Group Status Bit 748" "Group 0,Group 1" bitfld.long 0x00 11. " GSB747 ,Group Status Bit 747" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB746 ,Group Status Bit 746" "Group 0,Group 1" bitfld.long 0x00 9. " GSB745 ,Group Status Bit 745" "Group 0,Group 1" bitfld.long 0x00 8. " GSB744 ,Group Status Bit 744" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB743 ,Group Status Bit 743" "Group 0,Group 1" bitfld.long 0x00 6. " GSB742 ,Group Status Bit 742" "Group 0,Group 1" bitfld.long 0x00 5. " GSB741 ,Group Status Bit 741" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB740 ,Group Status Bit 740" "Group 0,Group 1" bitfld.long 0x00 3. " GSB739 ,Group Status Bit 739" "Group 0,Group 1" bitfld.long 0x00 2. " GSB738 ,Group Status Bit 738" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB737 ,Group Status Bit 737" "Group 0,Group 1" bitfld.long 0x00 0. " GSB736 ,Group Status Bit 736" "Group 0,Group 1" else hgroup.long 0x00DC++0x03 hide.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x18) group.long 0x00E0++0x03 line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24 (Non-secure access)" bitfld.long 0x00 31. " GSB799 ,Group Status Bit 799" "Group 0,Group 1" bitfld.long 0x00 30. " GSB798 ,Group Status Bit 798" "Group 0,Group 1" bitfld.long 0x00 29. " GSB797 ,Group Status Bit 797" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB796 ,Group Status Bit 796" "Group 0,Group 1" bitfld.long 0x00 27. " GSB795 ,Group Status Bit 795" "Group 0,Group 1" bitfld.long 0x00 26. " GSB794 ,Group Status Bit 794" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB793 ,Group Status Bit 793" "Group 0,Group 1" bitfld.long 0x00 24. " GSB792 ,Group Status Bit 792" "Group 0,Group 1" bitfld.long 0x00 23. " GSB791 ,Group Status Bit 791" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB790 ,Group Status Bit 790" "Group 0,Group 1" bitfld.long 0x00 21. " GSB789 ,Group Status Bit 789" "Group 0,Group 1" bitfld.long 0x00 20. " GSB788 ,Group Status Bit 788" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB787 ,Group Status Bit 787" "Group 0,Group 1" bitfld.long 0x00 18. " GSB786 ,Group Status Bit 786" "Group 0,Group 1" bitfld.long 0x00 17. " GSB785 ,Group Status Bit 785" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB784 ,Group Status Bit 784" "Group 0,Group 1" bitfld.long 0x00 15. " GSB783 ,Group Status Bit 783" "Group 0,Group 1" bitfld.long 0x00 14. " GSB782 ,Group Status Bit 782" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB781 ,Group Status Bit 781" "Group 0,Group 1" bitfld.long 0x00 12. " GSB780 ,Group Status Bit 780" "Group 0,Group 1" bitfld.long 0x00 11. " GSB779 ,Group Status Bit 779" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB778 ,Group Status Bit 778" "Group 0,Group 1" bitfld.long 0x00 9. " GSB777 ,Group Status Bit 777" "Group 0,Group 1" bitfld.long 0x00 8. " GSB776 ,Group Status Bit 776" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB775 ,Group Status Bit 775" "Group 0,Group 1" bitfld.long 0x00 6. " GSB774 ,Group Status Bit 774" "Group 0,Group 1" bitfld.long 0x00 5. " GSB773 ,Group Status Bit 773" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB772 ,Group Status Bit 772" "Group 0,Group 1" bitfld.long 0x00 3. " GSB771 ,Group Status Bit 771" "Group 0,Group 1" bitfld.long 0x00 2. " GSB770 ,Group Status Bit 770" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB769 ,Group Status Bit 769" "Group 0,Group 1" bitfld.long 0x00 0. " GSB768 ,Group Status Bit 768" "Group 0,Group 1" else hgroup.long 0x0E0++0x03 hide.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x19) group.long 0x00E4++0x03 line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25 (Non-secure access)" bitfld.long 0x00 31. " GSB831 ,Group Status Bit 831" "Group 0,Group 1" bitfld.long 0x00 30. " GSB830 ,Group Status Bit 830" "Group 0,Group 1" bitfld.long 0x00 29. " GSB829 ,Group Status Bit 829" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB828 ,Group Status Bit 828" "Group 0,Group 1" bitfld.long 0x00 27. " GSB827 ,Group Status Bit 827" "Group 0,Group 1" bitfld.long 0x00 26. " GSB826 ,Group Status Bit 826" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB825 ,Group Status Bit 825" "Group 0,Group 1" bitfld.long 0x00 24. " GSB824 ,Group Status Bit 824" "Group 0,Group 1" bitfld.long 0x00 23. " GSB823 ,Group Status Bit 823" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB822 ,Group Status Bit 822" "Group 0,Group 1" bitfld.long 0x00 21. " GSB821 ,Group Status Bit 821" "Group 0,Group 1" bitfld.long 0x00 20. " GSB820 ,Group Status Bit 820" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB819 ,Group Status Bit 819" "Group 0,Group 1" bitfld.long 0x00 18. " GSB818 ,Group Status Bit 818" "Group 0,Group 1" bitfld.long 0x00 17. " GSB817 ,Group Status Bit 817" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB816 ,Group Status Bit 816" "Group 0,Group 1" bitfld.long 0x00 15. " GSB815 ,Group Status Bit 815" "Group 0,Group 1" bitfld.long 0x00 14. " GSB814 ,Group Status Bit 814" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB813 ,Group Status Bit 813" "Group 0,Group 1" bitfld.long 0x00 12. " GSB812 ,Group Status Bit 812" "Group 0,Group 1" bitfld.long 0x00 11. " GSB811 ,Group Status Bit 811" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB810 ,Group Status Bit 810" "Group 0,Group 1" bitfld.long 0x00 9. " GSB809 ,Group Status Bit 809" "Group 0,Group 1" bitfld.long 0x00 8. " GSB808 ,Group Status Bit 808" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB807 ,Group Status Bit 807" "Group 0,Group 1" bitfld.long 0x00 6. " GSB806 ,Group Status Bit 806" "Group 0,Group 1" bitfld.long 0x00 5. " GSB805 ,Group Status Bit 805" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB804 ,Group Status Bit 804" "Group 0,Group 1" bitfld.long 0x00 3. " GSB803 ,Group Status Bit 803" "Group 0,Group 1" bitfld.long 0x00 2. " GSB802 ,Group Status Bit 802" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB801 ,Group Status Bit 801" "Group 0,Group 1" bitfld.long 0x00 0. " GSB800 ,Group Status Bit 800" "Group 0,Group 1" else hgroup.long 0x00E4++0x03 hide.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1A) group.long 0x00E8++0x03 line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26 (Non-secure access)" bitfld.long 0x00 31. " GSB863 ,Group Status Bit 863" "Group 0,Group 1" bitfld.long 0x00 30. " GSB862 ,Group Status Bit 862" "Group 0,Group 1" bitfld.long 0x00 29. " GSB861 ,Group Status Bit 861" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB860 ,Group Status Bit 860" "Group 0,Group 1" bitfld.long 0x00 27. " GSB859 ,Group Status Bit 859" "Group 0,Group 1" bitfld.long 0x00 26. " GSB858 ,Group Status Bit 858" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB857 ,Group Status Bit 857" "Group 0,Group 1" bitfld.long 0x00 24. " GSB856 ,Group Status Bit 856" "Group 0,Group 1" bitfld.long 0x00 23. " GSB855 ,Group Status Bit 855" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB854 ,Group Status Bit 854" "Group 0,Group 1" bitfld.long 0x00 21. " GSB853 ,Group Status Bit 853" "Group 0,Group 1" bitfld.long 0x00 20. " GSB852 ,Group Status Bit 852" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB851 ,Group Status Bit 851" "Group 0,Group 1" bitfld.long 0x00 18. " GSB850 ,Group Status Bit 850" "Group 0,Group 1" bitfld.long 0x00 17. " GSB849 ,Group Status Bit 849" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB848 ,Group Status Bit 848" "Group 0,Group 1" bitfld.long 0x00 15. " GSB847 ,Group Status Bit 847" "Group 0,Group 1" bitfld.long 0x00 14. " GSB846 ,Group Status Bit 846" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB845 ,Group Status Bit 845" "Group 0,Group 1" bitfld.long 0x00 12. " GSB844 ,Group Status Bit 844" "Group 0,Group 1" bitfld.long 0x00 11. " GSB843 ,Group Status Bit 843" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB842 ,Group Status Bit 842" "Group 0,Group 1" bitfld.long 0x00 9. " GSB841 ,Group Status Bit 841" "Group 0,Group 1" bitfld.long 0x00 8. " GSB840 ,Group Status Bit 840" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB839 ,Group Status Bit 839" "Group 0,Group 1" bitfld.long 0x00 6. " GSB838 ,Group Status Bit 838" "Group 0,Group 1" bitfld.long 0x00 5. " GSB837 ,Group Status Bit 837" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB836 ,Group Status Bit 836" "Group 0,Group 1" bitfld.long 0x00 3. " GSB835 ,Group Status Bit 835" "Group 0,Group 1" bitfld.long 0x00 2. " GSB834 ,Group Status Bit 834" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB833 ,Group Status Bit 833" "Group 0,Group 1" bitfld.long 0x00 0. " GSB832 ,Group Status Bit 832" "Group 0,Group 1" else hgroup.long 0x00E8++0x03 hide.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1B) group.long 0x00EC++0x03 line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27 (Non-Secure access)" bitfld.long 0x00 31. " GSB895 ,Group Status Bit 895" "Group 0,Group 1" bitfld.long 0x00 30. " GSB894 ,Group Status Bit 894" "Group 0,Group 1" bitfld.long 0x00 29. " GSB893 ,Group Status Bit 893" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB892 ,Group Status Bit 892" "Group 0,Group 1" bitfld.long 0x00 27. " GSB891 ,Group Status Bit 891" "Group 0,Group 1" bitfld.long 0x00 26. " GSB890 ,Group Status Bit 890" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB889 ,Group Status Bit 889" "Group 0,Group 1" bitfld.long 0x00 24. " GSB888 ,Group Status Bit 888" "Group 0,Group 1" bitfld.long 0x00 23. " GSB887 ,Group Status Bit 887" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB886 ,Group Status Bit 886" "Group 0,Group 1" bitfld.long 0x00 21. " GSB885 ,Group Status Bit 885" "Group 0,Group 1" bitfld.long 0x00 20. " GSB884 ,Group Status Bit 884" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB883 ,Group Status Bit 883" "Group 0,Group 1" bitfld.long 0x00 18. " GSB882 ,Group Status Bit 882" "Group 0,Group 1" bitfld.long 0x00 17. " GSB881 ,Group Status Bit 881" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB880 ,Group Status Bit 880" "Group 0,Group 1" bitfld.long 0x00 15. " GSB879 ,Group Status Bit 879" "Group 0,Group 1" bitfld.long 0x00 14. " GSB878 ,Group Status Bit 878" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB877 ,Group Status Bit 877" "Group 0,Group 1" bitfld.long 0x00 12. " GSB876 ,Group Status Bit 876" "Group 0,Group 1" bitfld.long 0x00 11. " GSB875 ,Group Status Bit 875" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB874 ,Group Status Bit 874" "Group 0,Group 1" bitfld.long 0x00 9. " GSB873 ,Group Status Bit 873" "Group 0,Group 1" bitfld.long 0x00 8. " GSB872 ,Group Status Bit 872" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB871 ,Group Status Bit 871" "Group 0,Group 1" bitfld.long 0x00 6. " GSB870 ,Group Status Bit 870" "Group 0,Group 1" bitfld.long 0x00 5. " GSB869 ,Group Status Bit 869" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB868 ,Group Status Bit 868" "Group 0,Group 1" bitfld.long 0x00 3. " GSB867 ,Group Status Bit 867" "Group 0,Group 1" bitfld.long 0x00 2. " GSB866 ,Group Status Bit 866" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB865 ,Group Status Bit 865" "Group 0,Group 1" bitfld.long 0x00 0. " GSB864 ,Group Status Bit 864" "Group 0,Group 1" else hgroup.long 0x00EC++0x03 hide.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1C) group.long 0x00F0++0x03 line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28 (Non-secure access)" bitfld.long 0x00 31. " GSB927 ,Group Status Bit 927" "Group 0,Group 1" bitfld.long 0x00 30. " GSB926 ,Group Status Bit 926" "Group 0,Group 1" bitfld.long 0x00 29. " GSB925 ,Group Status Bit 925" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB924 ,Group Status Bit 924" "Group 0,Group 1" bitfld.long 0x00 27. " GSB923 ,Group Status Bit 923" "Group 0,Group 1" bitfld.long 0x00 26. " GSB922 ,Group Status Bit 922" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB921 ,Group Status Bit 921" "Group 0,Group 1" bitfld.long 0x00 24. " GSB920 ,Group Status Bit 920" "Group 0,Group 1" bitfld.long 0x00 23. " GSB919 ,Group Status Bit 919" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB918 ,Group Status Bit 918" "Group 0,Group 1" bitfld.long 0x00 21. " GSB917 ,Group Status Bit 917" "Group 0,Group 1" bitfld.long 0x00 20. " GSB916 ,Group Status Bit 916" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB915 ,Group Status Bit 915" "Group 0,Group 1" bitfld.long 0x00 18. " GSB914 ,Group Status Bit 914" "Group 0,Group 1" bitfld.long 0x00 17. " GSB913 ,Group Status Bit 913" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB912 ,Group Status Bit 912" "Group 0,Group 1" bitfld.long 0x00 15. " GSB911 ,Group Status Bit 911" "Group 0,Group 1" bitfld.long 0x00 14. " GSB910 ,Group Status Bit 910" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB909 ,Group Status Bit 909" "Group 0,Group 1" bitfld.long 0x00 12. " GSB908 ,Group Status Bit 908" "Group 0,Group 1" bitfld.long 0x00 11. " GSB907 ,Group Status Bit 907" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB906 ,Group Status Bit 906" "Group 0,Group 1" bitfld.long 0x00 9. " GSB905 ,Group Status Bit 905" "Group 0,Group 1" bitfld.long 0x00 8. " GSB904 ,Group Status Bit 904" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB903 ,Group Status Bit 903" "Group 0,Group 1" bitfld.long 0x00 6. " GSB902 ,Group Status Bit 902" "Group 0,Group 1" bitfld.long 0x00 5. " GSB901 ,Group Status Bit 901" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB900 ,Group Status Bit 900" "Group 0,Group 1" bitfld.long 0x00 3. " GSB899 ,Group Status Bit 899" "Group 0,Group 1" bitfld.long 0x00 2. " GSB898 ,Group Status Bit 898" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB897 ,Group Status Bit 897" "Group 0,Group 1" bitfld.long 0x00 0. " GSB896 ,Group Status Bit 896" "Group 0,Group 1" else hgroup.long 0x0F0++0x03 hide.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1D) group.long 0x00F4++0x03 line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29 (Non-secure access)" bitfld.long 0x00 31. " GSB959 ,Group Status Bit 959" "Group 0,Group 1" bitfld.long 0x00 30. " GSB958 ,Group Status Bit 958" "Group 0,Group 1" bitfld.long 0x00 29. " GSB957 ,Group Status Bit 957" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB956 ,Group Status Bit 956" "Group 0,Group 1" bitfld.long 0x00 27. " GSB955 ,Group Status Bit 955" "Group 0,Group 1" bitfld.long 0x00 26. " GSB954 ,Group Status Bit 954" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB953 ,Group Status Bit 953" "Group 0,Group 1" bitfld.long 0x00 24. " GSB952 ,Group Status Bit 952" "Group 0,Group 1" bitfld.long 0x00 23. " GSB951 ,Group Status Bit 951" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB950 ,Group Status Bit 950" "Group 0,Group 1" bitfld.long 0x00 21. " GSB949 ,Group Status Bit 949" "Group 0,Group 1" bitfld.long 0x00 20. " GSB948 ,Group Status Bit 948" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB947 ,Group Status Bit 947" "Group 0,Group 1" bitfld.long 0x00 18. " GSB946 ,Group Status Bit 946" "Group 0,Group 1" bitfld.long 0x00 17. " GSB945 ,Group Status Bit 945" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB944 ,Group Status Bit 944" "Group 0,Group 1" bitfld.long 0x00 15. " GSB943 ,Group Status Bit 943" "Group 0,Group 1" bitfld.long 0x00 14. " GSB942 ,Group Status Bit 942" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB941 ,Group Status Bit 941" "Group 0,Group 1" bitfld.long 0x00 12. " GSB940 ,Group Status Bit 940" "Group 0,Group 1" bitfld.long 0x00 11. " GSB939 ,Group Status Bit 939" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB938 ,Group Status Bit 938" "Group 0,Group 1" bitfld.long 0x00 9. " GSB937 ,Group Status Bit 937" "Group 0,Group 1" bitfld.long 0x00 8. " GSB936 ,Group Status Bit 936" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB935 ,Group Status Bit 935" "Group 0,Group 1" bitfld.long 0x00 6. " GSB934 ,Group Status Bit 934" "Group 0,Group 1" bitfld.long 0x00 5. " GSB933 ,Group Status Bit 933" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB932 ,Group Status Bit 932" "Group 0,Group 1" bitfld.long 0x00 3. " GSB931 ,Group Status Bit 931" "Group 0,Group 1" bitfld.long 0x00 2. " GSB930 ,Group Status Bit 930" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB929 ,Group Status Bit 929" "Group 0,Group 1" bitfld.long 0x00 0. " GSB928 ,Group Status Bit 928" "Group 0,Group 1" else hgroup.long 0x00F4++0x03 hide.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1E) group.long 0x00F8++0x03 line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30 (Non-secure access)" bitfld.long 0x00 31. " GSB991 ,Group Status Bit 991" "Group 0,Group 1" bitfld.long 0x00 30. " GSB990 ,Group Status Bit 990" "Group 0,Group 1" bitfld.long 0x00 29. " GSB989 ,Group Status Bit 989" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB988 ,Group Status Bit 988" "Group 0,Group 1" bitfld.long 0x00 27. " GSB987 ,Group Status Bit 987" "Group 0,Group 1" bitfld.long 0x00 26. " GSB986 ,Group Status Bit 986" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB985 ,Group Status Bit 985" "Group 0,Group 1" bitfld.long 0x00 24. " GSB984 ,Group Status Bit 984" "Group 0,Group 1" bitfld.long 0x00 23. " GSB983 ,Group Status Bit 983" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB982 ,Group Status Bit 982" "Group 0,Group 1" bitfld.long 0x00 21. " GSB981 ,Group Status Bit 981" "Group 0,Group 1" bitfld.long 0x00 20. " GSB980 ,Group Status Bit 980" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB979 ,Group Status Bit 979" "Group 0,Group 1" bitfld.long 0x00 18. " GSB978 ,Group Status Bit 978" "Group 0,Group 1" bitfld.long 0x00 17. " GSB977 ,Group Status Bit 977" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB976 ,Group Status Bit 976" "Group 0,Group 1" bitfld.long 0x00 15. " GSB975 ,Group Status Bit 975" "Group 0,Group 1" bitfld.long 0x00 14. " GSB974 ,Group Status Bit 974" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB973 ,Group Status Bit 973" "Group 0,Group 1" bitfld.long 0x00 12. " GSB972 ,Group Status Bit 972" "Group 0,Group 1" bitfld.long 0x00 11. " GSB971 ,Group Status Bit 971" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB970 ,Group Status Bit 970" "Group 0,Group 1" bitfld.long 0x00 9. " GSB969 ,Group Status Bit 969" "Group 0,Group 1" bitfld.long 0x00 8. " GSB968 ,Group Status Bit 968" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB967 ,Group Status Bit 967" "Group 0,Group 1" bitfld.long 0x00 6. " GSB966 ,Group Status Bit 966" "Group 0,Group 1" bitfld.long 0x00 5. " GSB965 ,Group Status Bit 965" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB964 ,Group Status Bit 964" "Group 0,Group 1" bitfld.long 0x00 3. " GSB963 ,Group Status Bit 963" "Group 0,Group 1" bitfld.long 0x00 2. " GSB962 ,Group Status Bit 962" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB961 ,Group Status Bit 961" "Group 0,Group 1" bitfld.long 0x00 0. " GSB960 ,Group Status Bit 960" "Group 0,Group 1" else hgroup.long 0x00F8++0x03 hide.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)==0x1F) group.long 0x00FC++0x03 line.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31 (Non-secure access)" bitfld.long 0x00 27. " GSB1019 ,Group Status Bit 1019" "Group 0,Group 1" bitfld.long 0x00 26. " GSB1018 ,Group Status Bit 1018" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB1017 ,Group Status Bit 1017" "Group 0,Group 1" bitfld.long 0x00 24. " GSB1016 ,Group Status Bit 1016" "Group 0,Group 1" bitfld.long 0x00 23. " GSB1015 ,Group Status Bit 1015" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB1014 ,Group Status Bit 1014" "Group 0,Group 1" bitfld.long 0x00 21. " GSB1013 ,Group Status Bit 1013" "Group 0,Group 1" bitfld.long 0x00 20. " GSB1012 ,Group Status Bit 1012" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB1011 ,Group Status Bit 1011" "Group 0,Group 1" bitfld.long 0x00 18. " GSB1010 ,Group Status Bit 1010" "Group 0,Group 1" bitfld.long 0x00 17. " GSB1009 ,Group Status Bit 1009" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB1008 ,Group Status Bit 1008" "Group 0,Group 1" bitfld.long 0x00 15. " GSB1007 ,Group Status Bit 1007" "Group 0,Group 1" bitfld.long 0x00 14. " GSB1006 ,Group Status Bit 1006" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB1005 ,Group Status Bit 1005" "Group 0,Group 1" bitfld.long 0x00 12. " GSB1004 ,Group Status Bit 1004" "Group 0,Group 1" bitfld.long 0x00 11. " GSB1003 ,Group Status Bit 1003" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB1002 ,Group Status Bit 1002" "Group 0,Group 1" bitfld.long 0x00 9. " GSB1001 ,Group Status Bit 1001" "Group 0,Group 1" bitfld.long 0x00 8. " GSB1000 ,Group Status Bit 1000" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB999 ,Group Status Bit 999" "Group 0,Group 1" bitfld.long 0x00 6. " GSB998 ,Group Status Bit 998" "Group 0,Group 1" bitfld.long 0x00 5. " GSB997 ,Group Status Bit 997" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB996 ,Group Status Bit 996" "Group 0,Group 1" bitfld.long 0x00 3. " GSB995 ,Group Status Bit 995" "Group 0,Group 1" bitfld.long 0x00 2. " GSB994 ,Group Status Bit 994" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB993 ,Group Status Bit 993" "Group 0,Group 1" bitfld.long 0x00 0. " GSB992 ,Group Status Bit 992" "Group 0,Group 1" else hgroup.long 0x00FC++0x03 hide.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end endif width 24. tree "Set/Clear Enable Registers" group.long 0x0100++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB31 ,Set/Clear Enable Bit 31" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB30 ,Set/Clear Enable Bit 30" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB29 ,Set/Clear Enable Bit 29" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB28 ,Set/Clear Enable Bit 28" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB27 ,Set/Clear Enable Bit 27" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB26 ,Set/Clear Enable Bit 26" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB25 ,Set/Clear Enable Bit 25" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB24 ,Set/Clear Enable Bit 24" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB23 ,Set/Clear Enable Bit 23" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB22 ,Set/Clear Enable Bit 22" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB21 ,Set/Clear Enable Bit 21" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB20 ,Set/Clear Enable Bit 20" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB19 ,Set/Clear Enable Bit 19" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB18 ,Set/Clear Enable Bit 18" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB17 ,Set/Clear Enable Bit 17" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB16 ,Set/Clear Enable Bit 16" "Disabled,Enabled" if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x01) group.long 0x0104++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB63 ,Set/Clear Enable Bit 63" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB62 ,Set/Clear Enable Bit 62" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB61 ,Set/Clear Enable Bit 61" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB60 ,Set/Clear Enable Bit 60" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB59 ,Set/Clear Enable Bit 59" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB58 ,Set/Clear Enable Bit 58" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB57 ,Set/Clear Enable Bit 57" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB56 ,Set/Clear Enable Bit 56" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB55 ,Set/Clear Enable Bit 55" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB54 ,Set/Clear Enable Bit 54" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB53 ,Set/Clear Enable Bit 53" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB52 ,Set/Clear Enable Bit 52" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB51 ,Set/Clear Enable Bit 51" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB50 ,Set/Clear Enable Bit 50" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB49 ,Set/Clear Enable Bit 49" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB48 ,Set/Clear Enable Bit 48" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB47 ,Set/Clear Enable Bit 47" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB46 ,Set/Clear Enable Bit 46" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB45 ,Set/Clear Enable Bit 45" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB44 ,Set/Clear Enable Bit 44" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB43 ,Set/Clear Enable Bit 43" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB42 ,Set/Clear Enable Bit 42" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB41 ,Set/Clear Enable Bit 41" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB40 ,Set/Clear Enable Bit 40" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB39 ,Set/Clear Enable Bit 39" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB38 ,Set/Clear Enable Bit 38" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB37 ,Set/Clear Enable Bit 37" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB36 ,Set/Clear Enable Bit 36" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB35 ,Set/Clear Enable Bit 35" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB34 ,Set/Clear Enable Bit 34" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB33 ,Set/Clear Enable Bit 33" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB32 ,Set/Clear Enable Bit 32" "Disabled,Enabled" else hgroup.long 0x0104++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x02) group.long 0x0108++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB95 ,Set/Clear Enable Bit 95" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB94 ,Set/Clear Enable Bit 94" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB93 ,Set/Clear Enable Bit 93" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB92 ,Set/Clear Enable Bit 92" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB91 ,Set/Clear Enable Bit 91" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB90 ,Set/Clear Enable Bit 90" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB89 ,Set/Clear Enable Bit 89" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB88 ,Set/Clear Enable Bit 88" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB87 ,Set/Clear Enable Bit 87" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB86 ,Set/Clear Enable Bit 86" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB85 ,Set/Clear Enable Bit 85" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB84 ,Set/Clear Enable Bit 84" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB83 ,Set/Clear Enable Bit 83" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB82 ,Set/Clear Enable Bit 82" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB81 ,Set/Clear Enable Bit 81" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB80 ,Set/Clear Enable Bit 80" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB79 ,Set/Clear Enable Bit 79" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB78 ,Set/Clear Enable Bit 78" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB77 ,Set/Clear Enable Bit 77" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB76 ,Set/Clear Enable Bit 76" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB75 ,Set/Clear Enable Bit 75" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB74 ,Set/Clear Enable Bit 74" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB73 ,Set/Clear Enable Bit 73" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB72 ,Set/Clear Enable Bit 72" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB71 ,Set/Clear Enable Bit 71" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB70 ,Set/Clear Enable Bit 70" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB69 ,Set/Clear Enable Bit 69" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB68 ,Set/Clear Enable Bit 68" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB67 ,Set/Clear Enable Bit 67" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB66 ,Set/Clear Enable Bit 66" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB65 ,Set/Clear Enable Bit 65" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB64 ,Set/Clear Enable Bit 64" "Disabled,Enabled" else hgroup.long 0x0108++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x03) group.long 0x010C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB127 ,Set/Clear Enable Bit 127" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB126 ,Set/Clear Enable Bit 126" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB125 ,Set/Clear Enable Bit 125" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB124 ,Set/Clear Enable Bit 124" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB123 ,Set/Clear Enable Bit 123" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB122 ,Set/Clear Enable Bit 122" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB121 ,Set/Clear Enable Bit 121" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB120 ,Set/Clear Enable Bit 120" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB119 ,Set/Clear Enable Bit 119" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB118 ,Set/Clear Enable Bit 118" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB117 ,Set/Clear Enable Bit 117" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB116 ,Set/Clear Enable Bit 116" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB115 ,Set/Clear Enable Bit 115" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB114 ,Set/Clear Enable Bit 114" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB113 ,Set/Clear Enable Bit 113" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB112 ,Set/Clear Enable Bit 112" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB111 ,Set/Clear Enable Bit 111" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB110 ,Set/Clear Enable Bit 110" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB109 ,Set/Clear Enable Bit 109" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB108 ,Set/Clear Enable Bit 108" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB107 ,Set/Clear Enable Bit 107" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB106 ,Set/Clear Enable Bit 106" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB105 ,Set/Clear Enable Bit 105" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB104 ,Set/Clear Enable Bit 104" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB103 ,Set/Clear Enable Bit 103" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB102 ,Set/Clear Enable Bit 102" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB101 ,Set/Clear Enable Bit 101" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB100 ,Set/Clear Enable Bit 100" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB99 ,Set/Clear Enable Bit 99" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB98 ,Set/Clear Enable Bit 98" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB97 ,Set/Clear Enable Bit 97" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB96 ,Set/Clear Enable Bit 96" "Disabled,Enabled" else hgroup.long 0x010C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x04) group.long 0x0110++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB159 ,Set/Clear Enable Bit 159" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB158 ,Set/Clear Enable Bit 158" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB157 ,Set/Clear Enable Bit 157" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB156 ,Set/Clear Enable Bit 156" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB155 ,Set/Clear Enable Bit 155" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB154 ,Set/Clear Enable Bit 154" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB153 ,Set/Clear Enable Bit 153" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB152 ,Set/Clear Enable Bit 152" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB151 ,Set/Clear Enable Bit 151" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB150 ,Set/Clear Enable Bit 150" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB149 ,Set/Clear Enable Bit 149" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB148 ,Set/Clear Enable Bit 148" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB147 ,Set/Clear Enable Bit 147" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB146 ,Set/Clear Enable Bit 146" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB145 ,Set/Clear Enable Bit 145" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB144 ,Set/Clear Enable Bit 144" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB143 ,Set/Clear Enable Bit 143" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB142 ,Set/Clear Enable Bit 142" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB141 ,Set/Clear Enable Bit 141" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB140 ,Set/Clear Enable Bit 140" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB139 ,Set/Clear Enable Bit 139" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB138 ,Set/Clear Enable Bit 138" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB137 ,Set/Clear Enable Bit 137" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB136 ,Set/Clear Enable Bit 136" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB135 ,Set/Clear Enable Bit 135" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB134 ,Set/Clear Enable Bit 134" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB133 ,Set/Clear Enable Bit 133" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB132 ,Set/Clear Enable Bit 132" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB131 ,Set/Clear Enable Bit 131" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB130 ,Set/Clear Enable Bit 130" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB129 ,Set/Clear Enable Bit 129" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB128 ,Set/Clear Enable Bit 128" "Disabled,Enabled" else hgroup.long 0x0110++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x05) group.long 0x0114++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB191 ,Set/Clear Enable Bit 191" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB190 ,Set/Clear Enable Bit 190" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB189 ,Set/Clear Enable Bit 189" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB188 ,Set/Clear Enable Bit 188" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB187 ,Set/Clear Enable Bit 187" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB186 ,Set/Clear Enable Bit 186" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB185 ,Set/Clear Enable Bit 185" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB184 ,Set/Clear Enable Bit 184" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB183 ,Set/Clear Enable Bit 183" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB182 ,Set/Clear Enable Bit 182" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB181 ,Set/Clear Enable Bit 181" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB180 ,Set/Clear Enable Bit 180" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB179 ,Set/Clear Enable Bit 179" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB178 ,Set/Clear Enable Bit 178" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB177 ,Set/Clear Enable Bit 177" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB176 ,Set/Clear Enable Bit 176" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB175 ,Set/Clear Enable Bit 175" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB174 ,Set/Clear Enable Bit 174" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB173 ,Set/Clear Enable Bit 173" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB172 ,Set/Clear Enable Bit 172" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB171 ,Set/Clear Enable Bit 171" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB170 ,Set/Clear Enable Bit 170" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB169 ,Set/Clear Enable Bit 169" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB168 ,Set/Clear Enable Bit 168" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB167 ,Set/Clear Enable Bit 167" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB166 ,Set/Clear Enable Bit 166" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB165 ,Set/Clear Enable Bit 165" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB164 ,Set/Clear Enable Bit 164" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB163 ,Set/Clear Enable Bit 163" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB162 ,Set/Clear Enable Bit 162" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB161 ,Set/Clear Enable Bit 161" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB160 ,Set/Clear Enable Bit 160" "Disabled,Enabled" else hgroup.long 0x0114++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x06) group.long 0x0118++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB223 ,Set/Clear Enable Bit 223" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB222 ,Set/Clear Enable Bit 222" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB221 ,Set/Clear Enable Bit 221" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB220 ,Set/Clear Enable Bit 220" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB219 ,Set/Clear Enable Bit 219" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB218 ,Set/Clear Enable Bit 218" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB217 ,Set/Clear Enable Bit 217" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB216 ,Set/Clear Enable Bit 216" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB215 ,Set/Clear Enable Bit 215" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB214 ,Set/Clear Enable Bit 214" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB213 ,Set/Clear Enable Bit 213" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB212 ,Set/Clear Enable Bit 212" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB211 ,Set/Clear Enable Bit 211" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB210 ,Set/Clear Enable Bit 210" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB209 ,Set/Clear Enable Bit 209" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB208 ,Set/Clear Enable Bit 208" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB207 ,Set/Clear Enable Bit 207" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB206 ,Set/Clear Enable Bit 206" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB205 ,Set/Clear Enable Bit 205" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB204 ,Set/Clear Enable Bit 204" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB203 ,Set/Clear Enable Bit 203" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB202 ,Set/Clear Enable Bit 202" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB201 ,Set/Clear Enable Bit 201" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB200 ,Set/Clear Enable Bit 200" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB199 ,Set/Clear Enable Bit 199" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB198 ,Set/Clear Enable Bit 198" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB197 ,Set/Clear Enable Bit 197" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB196 ,Set/Clear Enable Bit 196" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB195 ,Set/Clear Enable Bit 195" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB194 ,Set/Clear Enable Bit 194" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB193 ,Set/Clear Enable Bit 193" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB192 ,Set/Clear Enable Bit 192" "Disabled,Enabled" else hgroup.long 0x0118++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x07) group.long 0x011C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB255 ,Set/Clear Enable Bit 255" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB254 ,Set/Clear Enable Bit 254" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB253 ,Set/Clear Enable Bit 253" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB252 ,Set/Clear Enable Bit 252" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB251 ,Set/Clear Enable Bit 251" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB250 ,Set/Clear Enable Bit 250" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB249 ,Set/Clear Enable Bit 249" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB248 ,Set/Clear Enable Bit 248" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB247 ,Set/Clear Enable Bit 247" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB246 ,Set/Clear Enable Bit 246" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB245 ,Set/Clear Enable Bit 245" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB244 ,Set/Clear Enable Bit 244" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB243 ,Set/Clear Enable Bit 243" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB242 ,Set/Clear Enable Bit 242" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB241 ,Set/Clear Enable Bit 241" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB240 ,Set/Clear Enable Bit 240" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB239 ,Set/Clear Enable Bit 239" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB238 ,Set/Clear Enable Bit 238" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB237 ,Set/Clear Enable Bit 237" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB236 ,Set/Clear Enable Bit 236" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB235 ,Set/Clear Enable Bit 235" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB234 ,Set/Clear Enable Bit 234" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB233 ,Set/Clear Enable Bit 233" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB232 ,Set/Clear Enable Bit 232" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB231 ,Set/Clear Enable Bit 231" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB230 ,Set/Clear Enable Bit 230" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB229 ,Set/Clear Enable Bit 229" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB228 ,Set/Clear Enable Bit 228" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB227 ,Set/Clear Enable Bit 227" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB226 ,Set/Clear Enable Bit 226" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB225 ,Set/Clear Enable Bit 225" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB224 ,Set/Clear Enable Bit 224" "Disabled,Enabled" else hgroup.long 0x011C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x08) group.long 0x0120++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB287 ,Set/Clear Enable Bit 287" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB286 ,Set/Clear Enable Bit 286" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB285 ,Set/Clear Enable Bit 285" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB284 ,Set/Clear Enable Bit 284" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB283 ,Set/Clear Enable Bit 283" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB282 ,Set/Clear Enable Bit 282" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB281 ,Set/Clear Enable Bit 281" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB280 ,Set/Clear Enable Bit 280" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB279 ,Set/Clear Enable Bit 279" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB278 ,Set/Clear Enable Bit 278" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB277 ,Set/Clear Enable Bit 277" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB276 ,Set/Clear Enable Bit 276" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB275 ,Set/Clear Enable Bit 275" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB274 ,Set/Clear Enable Bit 274" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB273 ,Set/Clear Enable Bit 273" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB272 ,Set/Clear Enable Bit 272" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB271 ,Set/Clear Enable Bit 271" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB270 ,Set/Clear Enable Bit 270" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB269 ,Set/Clear Enable Bit 269" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB268 ,Set/Clear Enable Bit 268" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB267 ,Set/Clear Enable Bit 267" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB266 ,Set/Clear Enable Bit 266" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB265 ,Set/Clear Enable Bit 265" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB264 ,Set/Clear Enable Bit 264" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB263 ,Set/Clear Enable Bit 263" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB262 ,Set/Clear Enable Bit 262" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB261 ,Set/Clear Enable Bit 261" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB260 ,Set/Clear Enable Bit 260" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB259 ,Set/Clear Enable Bit 259" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB258 ,Set/Clear Enable Bit 258" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB257 ,Set/Clear Enable Bit 257" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB256 ,Set/Clear Enable Bit 256" "Disabled,Enabled" else hgroup.long 0x0120++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x09) group.long 0x0124++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB319 ,Set/Clear Enable Bit 319" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB318 ,Set/Clear Enable Bit 318" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB317 ,Set/Clear Enable Bit 317" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB316 ,Set/Clear Enable Bit 316" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB315 ,Set/Clear Enable Bit 315" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB314 ,Set/Clear Enable Bit 314" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB313 ,Set/Clear Enable Bit 313" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB312 ,Set/Clear Enable Bit 312" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB311 ,Set/Clear Enable Bit 311" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB310 ,Set/Clear Enable Bit 310" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB309 ,Set/Clear Enable Bit 309" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB308 ,Set/Clear Enable Bit 308" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB307 ,Set/Clear Enable Bit 307" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB306 ,Set/Clear Enable Bit 306" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB305 ,Set/Clear Enable Bit 305" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB304 ,Set/Clear Enable Bit 304" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB303 ,Set/Clear Enable Bit 303" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB302 ,Set/Clear Enable Bit 302" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB301 ,Set/Clear Enable Bit 301" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB300 ,Set/Clear Enable Bit 300" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB299 ,Set/Clear Enable Bit 299" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB298 ,Set/Clear Enable Bit 298" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB297 ,Set/Clear Enable Bit 297" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB296 ,Set/Clear Enable Bit 296" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB295 ,Set/Clear Enable Bit 295" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB294 ,Set/Clear Enable Bit 294" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB293 ,Set/Clear Enable Bit 293" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB292 ,Set/Clear Enable Bit 292" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB291 ,Set/Clear Enable Bit 291" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB290 ,Set/Clear Enable Bit 290" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB289 ,Set/Clear Enable Bit 289" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB288 ,Set/Clear Enable Bit 288" "Disabled,Enabled" else hgroup.long 0x0124++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0A) group.long 0x0128++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB351 ,Set/Clear Enable Bit 351" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB350 ,Set/Clear Enable Bit 350" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB349 ,Set/Clear Enable Bit 349" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB348 ,Set/Clear Enable Bit 348" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB347 ,Set/Clear Enable Bit 347" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB346 ,Set/Clear Enable Bit 346" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB345 ,Set/Clear Enable Bit 345" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB344 ,Set/Clear Enable Bit 344" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB343 ,Set/Clear Enable Bit 343" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB342 ,Set/Clear Enable Bit 342" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB341 ,Set/Clear Enable Bit 341" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB340 ,Set/Clear Enable Bit 340" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB339 ,Set/Clear Enable Bit 339" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB338 ,Set/Clear Enable Bit 338" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB337 ,Set/Clear Enable Bit 337" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB336 ,Set/Clear Enable Bit 336" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB335 ,Set/Clear Enable Bit 335" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB334 ,Set/Clear Enable Bit 334" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB333 ,Set/Clear Enable Bit 333" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB332 ,Set/Clear Enable Bit 332" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB331 ,Set/Clear Enable Bit 331" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB330 ,Set/Clear Enable Bit 330" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB329 ,Set/Clear Enable Bit 329" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB328 ,Set/Clear Enable Bit 328" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB327 ,Set/Clear Enable Bit 327" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB326 ,Set/Clear Enable Bit 326" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB325 ,Set/Clear Enable Bit 325" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB324 ,Set/Clear Enable Bit 324" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB323 ,Set/Clear Enable Bit 323" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB322 ,Set/Clear Enable Bit 322" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB321 ,Set/Clear Enable Bit 321" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB320 ,Set/Clear Enable Bit 320" "Disabled,Enabled" else hgroup.long 0x0128++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0B) group.long 0x012C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB383 ,Set/Clear Enable Bit 383" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB382 ,Set/Clear Enable Bit 382" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB381 ,Set/Clear Enable Bit 381" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB380 ,Set/Clear Enable Bit 380" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB379 ,Set/Clear Enable Bit 379" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB378 ,Set/Clear Enable Bit 378" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB377 ,Set/Clear Enable Bit 377" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB376 ,Set/Clear Enable Bit 376" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB375 ,Set/Clear Enable Bit 375" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB374 ,Set/Clear Enable Bit 374" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB373 ,Set/Clear Enable Bit 373" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB372 ,Set/Clear Enable Bit 372" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB371 ,Set/Clear Enable Bit 371" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB370 ,Set/Clear Enable Bit 370" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB369 ,Set/Clear Enable Bit 369" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB368 ,Set/Clear Enable Bit 368" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB367 ,Set/Clear Enable Bit 367" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB366 ,Set/Clear Enable Bit 366" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB365 ,Set/Clear Enable Bit 365" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB364 ,Set/Clear Enable Bit 364" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB363 ,Set/Clear Enable Bit 363" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB362 ,Set/Clear Enable Bit 362" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB361 ,Set/Clear Enable Bit 361" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB360 ,Set/Clear Enable Bit 360" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB359 ,Set/Clear Enable Bit 359" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB358 ,Set/Clear Enable Bit 358" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB357 ,Set/Clear Enable Bit 357" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB356 ,Set/Clear Enable Bit 356" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB355 ,Set/Clear Enable Bit 355" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB354 ,Set/Clear Enable Bit 354" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB353 ,Set/Clear Enable Bit 353" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB352 ,Set/Clear Enable Bit 352" "Disabled,Enabled" else hgroup.long 0x012C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0C) group.long 0x0130++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB415 ,Set/Clear Enable Bit 415" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB414 ,Set/Clear Enable Bit 414" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB413 ,Set/Clear Enable Bit 413" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB412 ,Set/Clear Enable Bit 412" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB411 ,Set/Clear Enable Bit 411" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB410 ,Set/Clear Enable Bit 410" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB409 ,Set/Clear Enable Bit 409" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB408 ,Set/Clear Enable Bit 408" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB407 ,Set/Clear Enable Bit 407" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB406 ,Set/Clear Enable Bit 406" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB405 ,Set/Clear Enable Bit 405" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB404 ,Set/Clear Enable Bit 404" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB403 ,Set/Clear Enable Bit 403" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB402 ,Set/Clear Enable Bit 402" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB401 ,Set/Clear Enable Bit 401" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB400 ,Set/Clear Enable Bit 400" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB399 ,Set/Clear Enable Bit 399" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB398 ,Set/Clear Enable Bit 398" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB397 ,Set/Clear Enable Bit 397" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB396 ,Set/Clear Enable Bit 396" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB395 ,Set/Clear Enable Bit 395" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB394 ,Set/Clear Enable Bit 394" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB393 ,Set/Clear Enable Bit 393" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB392 ,Set/Clear Enable Bit 392" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB391 ,Set/Clear Enable Bit 391" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB390 ,Set/Clear Enable Bit 390" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB389 ,Set/Clear Enable Bit 389" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB388 ,Set/Clear Enable Bit 388" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB387 ,Set/Clear Enable Bit 387" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB386 ,Set/Clear Enable Bit 386" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB385 ,Set/Clear Enable Bit 385" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB384 ,Set/Clear Enable Bit 384" "Disabled,Enabled" else hgroup.long 0x0130++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0D) group.long 0x0134++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB447 ,Set/Clear Enable Bit 447" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB446 ,Set/Clear Enable Bit 446" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB445 ,Set/Clear Enable Bit 445" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB444 ,Set/Clear Enable Bit 444" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB443 ,Set/Clear Enable Bit 443" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB442 ,Set/Clear Enable Bit 442" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB441 ,Set/Clear Enable Bit 441" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB440 ,Set/Clear Enable Bit 440" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB439 ,Set/Clear Enable Bit 439" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB438 ,Set/Clear Enable Bit 438" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB437 ,Set/Clear Enable Bit 437" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB436 ,Set/Clear Enable Bit 436" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB435 ,Set/Clear Enable Bit 435" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB434 ,Set/Clear Enable Bit 434" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB433 ,Set/Clear Enable Bit 433" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB432 ,Set/Clear Enable Bit 432" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB431 ,Set/Clear Enable Bit 431" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB430 ,Set/Clear Enable Bit 430" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB429 ,Set/Clear Enable Bit 429" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB428 ,Set/Clear Enable Bit 428" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB427 ,Set/Clear Enable Bit 427" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB426 ,Set/Clear Enable Bit 426" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB425 ,Set/Clear Enable Bit 425" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB424 ,Set/Clear Enable Bit 424" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB423 ,Set/Clear Enable Bit 423" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB422 ,Set/Clear Enable Bit 422" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB421 ,Set/Clear Enable Bit 421" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB420 ,Set/Clear Enable Bit 420" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB419 ,Set/Clear Enable Bit 419" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB418 ,Set/Clear Enable Bit 418" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB417 ,Set/Clear Enable Bit 417" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB416 ,Set/Clear Enable Bit 416" "Disabled,Enabled" else hgroup.long 0x0134++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0E) group.long 0x0138++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB479 ,Set/Clear Enable Bit 479" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB478 ,Set/Clear Enable Bit 478" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB477 ,Set/Clear Enable Bit 477" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB476 ,Set/Clear Enable Bit 476" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB475 ,Set/Clear Enable Bit 475" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB474 ,Set/Clear Enable Bit 474" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB473 ,Set/Clear Enable Bit 473" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB472 ,Set/Clear Enable Bit 472" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB471 ,Set/Clear Enable Bit 471" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB470 ,Set/Clear Enable Bit 470" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB469 ,Set/Clear Enable Bit 469" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB468 ,Set/Clear Enable Bit 468" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB467 ,Set/Clear Enable Bit 467" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB466 ,Set/Clear Enable Bit 466" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB465 ,Set/Clear Enable Bit 465" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB464 ,Set/Clear Enable Bit 464" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB463 ,Set/Clear Enable Bit 463" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB462 ,Set/Clear Enable Bit 462" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB461 ,Set/Clear Enable Bit 461" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB460 ,Set/Clear Enable Bit 460" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB459 ,Set/Clear Enable Bit 459" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB458 ,Set/Clear Enable Bit 458" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB457 ,Set/Clear Enable Bit 457" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB456 ,Set/Clear Enable Bit 456" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB455 ,Set/Clear Enable Bit 455" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB454 ,Set/Clear Enable Bit 454" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB453 ,Set/Clear Enable Bit 453" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB452 ,Set/Clear Enable Bit 452" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB451 ,Set/Clear Enable Bit 451" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB450 ,Set/Clear Enable Bit 450" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB449 ,Set/Clear Enable Bit 449" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB448 ,Set/Clear Enable Bit 448" "Disabled,Enabled" else hgroup.long 0x0138++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0F) group.long 0x013C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB511 ,Set/Clear Enable Bit 511" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB510 ,Set/Clear Enable Bit 510" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB509 ,Set/Clear Enable Bit 509" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB508 ,Set/Clear Enable Bit 508" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB507 ,Set/Clear Enable Bit 507" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB506 ,Set/Clear Enable Bit 506" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB505 ,Set/Clear Enable Bit 505" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB504 ,Set/Clear Enable Bit 504" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB503 ,Set/Clear Enable Bit 503" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB502 ,Set/Clear Enable Bit 502" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB501 ,Set/Clear Enable Bit 501" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB500 ,Set/Clear Enable Bit 500" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB499 ,Set/Clear Enable Bit 499" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB498 ,Set/Clear Enable Bit 498" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB497 ,Set/Clear Enable Bit 497" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB496 ,Set/Clear Enable Bit 496" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB495 ,Set/Clear Enable Bit 495" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB494 ,Set/Clear Enable Bit 494" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB493 ,Set/Clear Enable Bit 493" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB492 ,Set/Clear Enable Bit 492" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB491 ,Set/Clear Enable Bit 491" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB490 ,Set/Clear Enable Bit 490" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB489 ,Set/Clear Enable Bit 489" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB488 ,Set/Clear Enable Bit 488" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB487 ,Set/Clear Enable Bit 487" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB486 ,Set/Clear Enable Bit 486" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB485 ,Set/Clear Enable Bit 485" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB484 ,Set/Clear Enable Bit 484" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB483 ,Set/Clear Enable Bit 483" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB482 ,Set/Clear Enable Bit 482" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB481 ,Set/Clear Enable Bit 481" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB480 ,Set/Clear Enable Bit 480" "Disabled,Enabled" else hgroup.long 0x013C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x10) group.long 0x0140++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB543 ,Set/Clear Enable Bit 543" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB542 ,Set/Clear Enable Bit 542" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB541 ,Set/Clear Enable Bit 541" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB540 ,Set/Clear Enable Bit 540" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB539 ,Set/Clear Enable Bit 539" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB538 ,Set/Clear Enable Bit 538" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB537 ,Set/Clear Enable Bit 537" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB536 ,Set/Clear Enable Bit 536" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB535 ,Set/Clear Enable Bit 535" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB534 ,Set/Clear Enable Bit 534" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB533 ,Set/Clear Enable Bit 533" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB532 ,Set/Clear Enable Bit 532" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB531 ,Set/Clear Enable Bit 531" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB530 ,Set/Clear Enable Bit 530" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB529 ,Set/Clear Enable Bit 529" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB528 ,Set/Clear Enable Bit 528" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB527 ,Set/Clear Enable Bit 527" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB526 ,Set/Clear Enable Bit 526" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB525 ,Set/Clear Enable Bit 525" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB524 ,Set/Clear Enable Bit 524" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB523 ,Set/Clear Enable Bit 523" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB522 ,Set/Clear Enable Bit 522" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB521 ,Set/Clear Enable Bit 521" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB520 ,Set/Clear Enable Bit 520" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB519 ,Set/Clear Enable Bit 519" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB518 ,Set/Clear Enable Bit 518" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB517 ,Set/Clear Enable Bit 517" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB516 ,Set/Clear Enable Bit 516" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB515 ,Set/Clear Enable Bit 515" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB514 ,Set/Clear Enable Bit 514" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB513 ,Set/Clear Enable Bit 513" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB512 ,Set/Clear Enable Bit 512" "Disabled,Enabled" else hgroup.long 0x0140++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x11) group.long 0x0144++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB575 ,Set/Clear Enable Bit 575" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB574 ,Set/Clear Enable Bit 574" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB573 ,Set/Clear Enable Bit 573" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB572 ,Set/Clear Enable Bit 572" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB571 ,Set/Clear Enable Bit 571" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB570 ,Set/Clear Enable Bit 570" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB569 ,Set/Clear Enable Bit 569" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB568 ,Set/Clear Enable Bit 568" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB567 ,Set/Clear Enable Bit 567" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB566 ,Set/Clear Enable Bit 566" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB565 ,Set/Clear Enable Bit 565" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB564 ,Set/Clear Enable Bit 564" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB563 ,Set/Clear Enable Bit 563" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB562 ,Set/Clear Enable Bit 562" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB561 ,Set/Clear Enable Bit 561" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB560 ,Set/Clear Enable Bit 560" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB559 ,Set/Clear Enable Bit 559" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB558 ,Set/Clear Enable Bit 558" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB557 ,Set/Clear Enable Bit 557" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB556 ,Set/Clear Enable Bit 556" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB555 ,Set/Clear Enable Bit 555" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB554 ,Set/Clear Enable Bit 554" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB553 ,Set/Clear Enable Bit 553" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB552 ,Set/Clear Enable Bit 552" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB551 ,Set/Clear Enable Bit 551" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB550 ,Set/Clear Enable Bit 550" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB549 ,Set/Clear Enable Bit 549" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB548 ,Set/Clear Enable Bit 548" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB547 ,Set/Clear Enable Bit 547" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB546 ,Set/Clear Enable Bit 546" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB545 ,Set/Clear Enable Bit 545" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB544 ,Set/Clear Enable Bit 544" "Disabled,Enabled" else hgroup.long 0x0144++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x12) group.long 0x0148++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB607 ,Set/Clear Enable Bit 607" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB606 ,Set/Clear Enable Bit 606" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB605 ,Set/Clear Enable Bit 605" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB604 ,Set/Clear Enable Bit 604" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB603 ,Set/Clear Enable Bit 603" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB602 ,Set/Clear Enable Bit 602" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB601 ,Set/Clear Enable Bit 601" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB600 ,Set/Clear Enable Bit 600" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB599 ,Set/Clear Enable Bit 599" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB598 ,Set/Clear Enable Bit 598" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB597 ,Set/Clear Enable Bit 597" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB596 ,Set/Clear Enable Bit 596" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB595 ,Set/Clear Enable Bit 595" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB594 ,Set/Clear Enable Bit 594" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB593 ,Set/Clear Enable Bit 593" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB592 ,Set/Clear Enable Bit 592" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB591 ,Set/Clear Enable Bit 591" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB590 ,Set/Clear Enable Bit 590" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB589 ,Set/Clear Enable Bit 589" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB588 ,Set/Clear Enable Bit 588" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB587 ,Set/Clear Enable Bit 587" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB586 ,Set/Clear Enable Bit 586" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB585 ,Set/Clear Enable Bit 585" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB584 ,Set/Clear Enable Bit 584" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB583 ,Set/Clear Enable Bit 583" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB582 ,Set/Clear Enable Bit 582" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB581 ,Set/Clear Enable Bit 581" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB580 ,Set/Clear Enable Bit 580" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB579 ,Set/Clear Enable Bit 579" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB578 ,Set/Clear Enable Bit 578" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB577 ,Set/Clear Enable Bit 577" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB576 ,Set/Clear Enable Bit 576" "Disabled,Enabled" else hgroup.long 0x0148++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x13) group.long 0x014C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB639 ,Set/Clear Enable Bit 639" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB638 ,Set/Clear Enable Bit 638" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB637 ,Set/Clear Enable Bit 637" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB636 ,Set/Clear Enable Bit 636" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB635 ,Set/Clear Enable Bit 635" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB634 ,Set/Clear Enable Bit 634" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB633 ,Set/Clear Enable Bit 633" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB632 ,Set/Clear Enable Bit 632" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB631 ,Set/Clear Enable Bit 631" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB630 ,Set/Clear Enable Bit 630" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB629 ,Set/Clear Enable Bit 629" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB628 ,Set/Clear Enable Bit 628" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB627 ,Set/Clear Enable Bit 627" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB626 ,Set/Clear Enable Bit 626" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB625 ,Set/Clear Enable Bit 625" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB624 ,Set/Clear Enable Bit 624" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB623 ,Set/Clear Enable Bit 623" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB622 ,Set/Clear Enable Bit 622" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB621 ,Set/Clear Enable Bit 621" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB620 ,Set/Clear Enable Bit 620" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB619 ,Set/Clear Enable Bit 619" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB618 ,Set/Clear Enable Bit 618" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB617 ,Set/Clear Enable Bit 617" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB616 ,Set/Clear Enable Bit 616" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB615 ,Set/Clear Enable Bit 615" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB614 ,Set/Clear Enable Bit 614" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB613 ,Set/Clear Enable Bit 613" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB612 ,Set/Clear Enable Bit 612" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB611 ,Set/Clear Enable Bit 611" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB610 ,Set/Clear Enable Bit 610" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB609 ,Set/Clear Enable Bit 609" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB608 ,Set/Clear Enable Bit 608" "Disabled,Enabled" else hgroup.long 0x014C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x14) group.long 0x0150++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB671 ,Set/Clear Enable Bit 671" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB670 ,Set/Clear Enable Bit 670" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB669 ,Set/Clear Enable Bit 669" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB668 ,Set/Clear Enable Bit 668" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB667 ,Set/Clear Enable Bit 667" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB666 ,Set/Clear Enable Bit 666" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB665 ,Set/Clear Enable Bit 665" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB664 ,Set/Clear Enable Bit 664" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB663 ,Set/Clear Enable Bit 663" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB662 ,Set/Clear Enable Bit 662" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB661 ,Set/Clear Enable Bit 661" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB660 ,Set/Clear Enable Bit 660" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB659 ,Set/Clear Enable Bit 659" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB658 ,Set/Clear Enable Bit 658" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB657 ,Set/Clear Enable Bit 657" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB656 ,Set/Clear Enable Bit 656" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB655 ,Set/Clear Enable Bit 655" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB654 ,Set/Clear Enable Bit 654" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB653 ,Set/Clear Enable Bit 653" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB652 ,Set/Clear Enable Bit 652" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB651 ,Set/Clear Enable Bit 651" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB650 ,Set/Clear Enable Bit 650" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB649 ,Set/Clear Enable Bit 649" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB648 ,Set/Clear Enable Bit 648" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB647 ,Set/Clear Enable Bit 647" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB646 ,Set/Clear Enable Bit 646" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB645 ,Set/Clear Enable Bit 645" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB644 ,Set/Clear Enable Bit 644" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB643 ,Set/Clear Enable Bit 643" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB642 ,Set/Clear Enable Bit 642" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB641 ,Set/Clear Enable Bit 641" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB640 ,Set/Clear Enable Bit 640" "Disabled,Enabled" else hgroup.long 0x0150++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x15) group.long 0x0154++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB703 ,Set/Clear Enable Bit 703" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB702 ,Set/Clear Enable Bit 702" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB701 ,Set/Clear Enable Bit 701" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB700 ,Set/Clear Enable Bit 700" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB699 ,Set/Clear Enable Bit 699" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB698 ,Set/Clear Enable Bit 698" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB697 ,Set/Clear Enable Bit 697" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB696 ,Set/Clear Enable Bit 696" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB695 ,Set/Clear Enable Bit 695" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB694 ,Set/Clear Enable Bit 694" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB693 ,Set/Clear Enable Bit 693" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB692 ,Set/Clear Enable Bit 692" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB691 ,Set/Clear Enable Bit 691" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB690 ,Set/Clear Enable Bit 690" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB689 ,Set/Clear Enable Bit 689" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB688 ,Set/Clear Enable Bit 688" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB687 ,Set/Clear Enable Bit 687" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB686 ,Set/Clear Enable Bit 686" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB685 ,Set/Clear Enable Bit 685" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB684 ,Set/Clear Enable Bit 684" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB683 ,Set/Clear Enable Bit 683" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB682 ,Set/Clear Enable Bit 682" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB681 ,Set/Clear Enable Bit 681" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB680 ,Set/Clear Enable Bit 680" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB679 ,Set/Clear Enable Bit 679" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB678 ,Set/Clear Enable Bit 678" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB677 ,Set/Clear Enable Bit 677" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB676 ,Set/Clear Enable Bit 676" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB675 ,Set/Clear Enable Bit 675" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB674 ,Set/Clear Enable Bit 674" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB673 ,Set/Clear Enable Bit 673" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB672 ,Set/Clear Enable Bit 672" "Disabled,Enabled" else hgroup.long 0x0154++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x16) group.long 0x0158++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB735 ,Set/Clear Enable Bit 735" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB734 ,Set/Clear Enable Bit 734" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB733 ,Set/Clear Enable Bit 733" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB732 ,Set/Clear Enable Bit 732" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB731 ,Set/Clear Enable Bit 731" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB730 ,Set/Clear Enable Bit 730" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB729 ,Set/Clear Enable Bit 729" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB728 ,Set/Clear Enable Bit 728" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB727 ,Set/Clear Enable Bit 727" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB726 ,Set/Clear Enable Bit 726" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB725 ,Set/Clear Enable Bit 725" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB724 ,Set/Clear Enable Bit 724" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB723 ,Set/Clear Enable Bit 723" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB722 ,Set/Clear Enable Bit 722" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB721 ,Set/Clear Enable Bit 721" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB720 ,Set/Clear Enable Bit 720" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB719 ,Set/Clear Enable Bit 719" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB718 ,Set/Clear Enable Bit 718" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB717 ,Set/Clear Enable Bit 717" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB716 ,Set/Clear Enable Bit 716" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB715 ,Set/Clear Enable Bit 715" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB714 ,Set/Clear Enable Bit 714" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB713 ,Set/Clear Enable Bit 713" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB712 ,Set/Clear Enable Bit 712" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB711 ,Set/Clear Enable Bit 711" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB710 ,Set/Clear Enable Bit 710" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB709 ,Set/Clear Enable Bit 709" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB708 ,Set/Clear Enable Bit 708" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB707 ,Set/Clear Enable Bit 707" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB706 ,Set/Clear Enable Bit 706" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB705 ,Set/Clear Enable Bit 705" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB704 ,Set/Clear Enable Bit 704" "Disabled,Enabled" else hgroup.long 0x0158++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x17) group.long 0x015C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB767 ,Set/Clear Enable Bit 767" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB766 ,Set/Clear Enable Bit 766" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB765 ,Set/Clear Enable Bit 765" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB764 ,Set/Clear Enable Bit 764" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB763 ,Set/Clear Enable Bit 763" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB762 ,Set/Clear Enable Bit 762" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB761 ,Set/Clear Enable Bit 761" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB760 ,Set/Clear Enable Bit 760" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB759 ,Set/Clear Enable Bit 759" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB758 ,Set/Clear Enable Bit 758" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB757 ,Set/Clear Enable Bit 757" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB756 ,Set/Clear Enable Bit 756" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB755 ,Set/Clear Enable Bit 755" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB754 ,Set/Clear Enable Bit 754" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB753 ,Set/Clear Enable Bit 753" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB752 ,Set/Clear Enable Bit 752" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB751 ,Set/Clear Enable Bit 751" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB750 ,Set/Clear Enable Bit 750" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB749 ,Set/Clear Enable Bit 749" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB748 ,Set/Clear Enable Bit 748" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB747 ,Set/Clear Enable Bit 747" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB746 ,Set/Clear Enable Bit 746" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB745 ,Set/Clear Enable Bit 745" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB744 ,Set/Clear Enable Bit 744" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB743 ,Set/Clear Enable Bit 743" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB742 ,Set/Clear Enable Bit 742" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB741 ,Set/Clear Enable Bit 741" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB740 ,Set/Clear Enable Bit 740" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB739 ,Set/Clear Enable Bit 739" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB738 ,Set/Clear Enable Bit 738" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB737 ,Set/Clear Enable Bit 737" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB736 ,Set/Clear Enable Bit 736" "Disabled,Enabled" else hgroup.long 0x015C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x18) group.long 0x0160++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB799 ,Set/Clear Enable Bit 799" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB798 ,Set/Clear Enable Bit 798" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB797 ,Set/Clear Enable Bit 797" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB796 ,Set/Clear Enable Bit 796" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB795 ,Set/Clear Enable Bit 795" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB794 ,Set/Clear Enable Bit 794" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB793 ,Set/Clear Enable Bit 793" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB792 ,Set/Clear Enable Bit 792" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB791 ,Set/Clear Enable Bit 791" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB790 ,Set/Clear Enable Bit 790" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB789 ,Set/Clear Enable Bit 789" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB788 ,Set/Clear Enable Bit 788" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB787 ,Set/Clear Enable Bit 787" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB786 ,Set/Clear Enable Bit 786" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB785 ,Set/Clear Enable Bit 785" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB784 ,Set/Clear Enable Bit 784" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB783 ,Set/Clear Enable Bit 783" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB782 ,Set/Clear Enable Bit 782" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB781 ,Set/Clear Enable Bit 781" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB780 ,Set/Clear Enable Bit 780" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB779 ,Set/Clear Enable Bit 779" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB778 ,Set/Clear Enable Bit 778" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB777 ,Set/Clear Enable Bit 777" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB776 ,Set/Clear Enable Bit 776" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB775 ,Set/Clear Enable Bit 775" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB774 ,Set/Clear Enable Bit 774" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB773 ,Set/Clear Enable Bit 773" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB772 ,Set/Clear Enable Bit 772" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB771 ,Set/Clear Enable Bit 771" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB770 ,Set/Clear Enable Bit 770" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB769 ,Set/Clear Enable Bit 769" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB768 ,Set/Clear Enable Bit 768" "Disabled,Enabled" else hgroup.long 0x0160++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x19) group.long 0x0164++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB831 ,Set/Clear Enable Bit 831" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB830 ,Set/Clear Enable Bit 830" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB829 ,Set/Clear Enable Bit 829" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB828 ,Set/Clear Enable Bit 828" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB827 ,Set/Clear Enable Bit 827" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB826 ,Set/Clear Enable Bit 826" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB825 ,Set/Clear Enable Bit 825" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB824 ,Set/Clear Enable Bit 824" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB823 ,Set/Clear Enable Bit 823" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB822 ,Set/Clear Enable Bit 822" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB821 ,Set/Clear Enable Bit 821" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB820 ,Set/Clear Enable Bit 820" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB819 ,Set/Clear Enable Bit 819" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB818 ,Set/Clear Enable Bit 818" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB817 ,Set/Clear Enable Bit 817" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB816 ,Set/Clear Enable Bit 816" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB815 ,Set/Clear Enable Bit 815" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB814 ,Set/Clear Enable Bit 814" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB813 ,Set/Clear Enable Bit 813" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB812 ,Set/Clear Enable Bit 812" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB811 ,Set/Clear Enable Bit 811" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB810 ,Set/Clear Enable Bit 810" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB809 ,Set/Clear Enable Bit 809" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB808 ,Set/Clear Enable Bit 808" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB807 ,Set/Clear Enable Bit 807" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB806 ,Set/Clear Enable Bit 806" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB805 ,Set/Clear Enable Bit 805" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB804 ,Set/Clear Enable Bit 804" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB803 ,Set/Clear Enable Bit 803" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB802 ,Set/Clear Enable Bit 802" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB801 ,Set/Clear Enable Bit 801" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB800 ,Set/Clear Enable Bit 800" "Disabled,Enabled" else hgroup.long 0x0164++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1A) group.long 0x0168++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB863 ,Set/Clear Enable Bit 863" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB862 ,Set/Clear Enable Bit 862" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB861 ,Set/Clear Enable Bit 861" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB860 ,Set/Clear Enable Bit 860" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB859 ,Set/Clear Enable Bit 859" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB858 ,Set/Clear Enable Bit 858" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB857 ,Set/Clear Enable Bit 857" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB856 ,Set/Clear Enable Bit 856" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB855 ,Set/Clear Enable Bit 855" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB854 ,Set/Clear Enable Bit 854" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB853 ,Set/Clear Enable Bit 853" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB852 ,Set/Clear Enable Bit 852" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB851 ,Set/Clear Enable Bit 851" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB850 ,Set/Clear Enable Bit 850" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB849 ,Set/Clear Enable Bit 849" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB848 ,Set/Clear Enable Bit 848" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB847 ,Set/Clear Enable Bit 847" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB846 ,Set/Clear Enable Bit 846" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB845 ,Set/Clear Enable Bit 845" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB844 ,Set/Clear Enable Bit 844" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB843 ,Set/Clear Enable Bit 843" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB842 ,Set/Clear Enable Bit 842" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB841 ,Set/Clear Enable Bit 841" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB840 ,Set/Clear Enable Bit 840" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB839 ,Set/Clear Enable Bit 839" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB838 ,Set/Clear Enable Bit 838" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB837 ,Set/Clear Enable Bit 837" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB836 ,Set/Clear Enable Bit 836" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB835 ,Set/Clear Enable Bit 835" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB834 ,Set/Clear Enable Bit 834" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB833 ,Set/Clear Enable Bit 833" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB832 ,Set/Clear Enable Bit 832" "Disabled,Enabled" else hgroup.long 0x0168++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1B) group.long 0x016C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB895 ,Set/Clear Enable Bit 895" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB894 ,Set/Clear Enable Bit 894" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB893 ,Set/Clear Enable Bit 893" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB892 ,Set/Clear Enable Bit 892" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB891 ,Set/Clear Enable Bit 891" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB890 ,Set/Clear Enable Bit 890" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB889 ,Set/Clear Enable Bit 889" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB888 ,Set/Clear Enable Bit 888" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB887 ,Set/Clear Enable Bit 887" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB886 ,Set/Clear Enable Bit 886" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB885 ,Set/Clear Enable Bit 885" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB884 ,Set/Clear Enable Bit 884" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB883 ,Set/Clear Enable Bit 883" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB882 ,Set/Clear Enable Bit 882" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB881 ,Set/Clear Enable Bit 881" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB880 ,Set/Clear Enable Bit 880" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB879 ,Set/Clear Enable Bit 879" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB878 ,Set/Clear Enable Bit 878" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB877 ,Set/Clear Enable Bit 877" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB876 ,Set/Clear Enable Bit 876" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB875 ,Set/Clear Enable Bit 875" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB874 ,Set/Clear Enable Bit 874" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB873 ,Set/Clear Enable Bit 873" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB872 ,Set/Clear Enable Bit 872" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB871 ,Set/Clear Enable Bit 871" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB870 ,Set/Clear Enable Bit 870" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB869 ,Set/Clear Enable Bit 869" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB868 ,Set/Clear Enable Bit 868" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB867 ,Set/Clear Enable Bit 867" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB866 ,Set/Clear Enable Bit 866" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB865 ,Set/Clear Enable Bit 865" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB864 ,Set/Clear Enable Bit 864" "Disabled,Enabled" else hgroup.long 0x016C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1C) group.long 0x0170++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB927 ,Set/Clear Enable Bit 927" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB926 ,Set/Clear Enable Bit 926" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB925 ,Set/Clear Enable Bit 925" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB924 ,Set/Clear Enable Bit 924" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB923 ,Set/Clear Enable Bit 923" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB922 ,Set/Clear Enable Bit 922" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB921 ,Set/Clear Enable Bit 921" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB920 ,Set/Clear Enable Bit 920" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB919 ,Set/Clear Enable Bit 919" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB918 ,Set/Clear Enable Bit 918" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB917 ,Set/Clear Enable Bit 917" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB916 ,Set/Clear Enable Bit 916" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB915 ,Set/Clear Enable Bit 915" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB914 ,Set/Clear Enable Bit 914" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB913 ,Set/Clear Enable Bit 913" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB912 ,Set/Clear Enable Bit 912" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB911 ,Set/Clear Enable Bit 911" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB910 ,Set/Clear Enable Bit 910" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB909 ,Set/Clear Enable Bit 909" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB908 ,Set/Clear Enable Bit 908" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB907 ,Set/Clear Enable Bit 907" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB906 ,Set/Clear Enable Bit 906" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB905 ,Set/Clear Enable Bit 905" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB904 ,Set/Clear Enable Bit 904" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB903 ,Set/Clear Enable Bit 903" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB902 ,Set/Clear Enable Bit 902" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB901 ,Set/Clear Enable Bit 901" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB900 ,Set/Clear Enable Bit 900" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB899 ,Set/Clear Enable Bit 899" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB898 ,Set/Clear Enable Bit 898" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB897 ,Set/Clear Enable Bit 897" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB896 ,Set/Clear Enable Bit 896" "Disabled,Enabled" else hgroup.long 0x0170++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1D) group.long 0x0174++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB959 ,Set/Clear Enable Bit 959" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB958 ,Set/Clear Enable Bit 958" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB957 ,Set/Clear Enable Bit 957" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB956 ,Set/Clear Enable Bit 956" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB955 ,Set/Clear Enable Bit 955" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB954 ,Set/Clear Enable Bit 954" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB953 ,Set/Clear Enable Bit 953" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB952 ,Set/Clear Enable Bit 952" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB951 ,Set/Clear Enable Bit 951" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB950 ,Set/Clear Enable Bit 950" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB949 ,Set/Clear Enable Bit 949" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB948 ,Set/Clear Enable Bit 948" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB947 ,Set/Clear Enable Bit 947" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB946 ,Set/Clear Enable Bit 946" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB945 ,Set/Clear Enable Bit 945" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB944 ,Set/Clear Enable Bit 944" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB943 ,Set/Clear Enable Bit 943" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB942 ,Set/Clear Enable Bit 942" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB941 ,Set/Clear Enable Bit 941" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB940 ,Set/Clear Enable Bit 940" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB939 ,Set/Clear Enable Bit 939" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB938 ,Set/Clear Enable Bit 938" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB937 ,Set/Clear Enable Bit 937" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB936 ,Set/Clear Enable Bit 936" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB935 ,Set/Clear Enable Bit 935" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB934 ,Set/Clear Enable Bit 934" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB933 ,Set/Clear Enable Bit 933" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB932 ,Set/Clear Enable Bit 932" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB931 ,Set/Clear Enable Bit 931" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB930 ,Set/Clear Enable Bit 930" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB929 ,Set/Clear Enable Bit 929" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB928 ,Set/Clear Enable Bit 928" "Disabled,Enabled" else hgroup.long 0x0174++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1E) group.long 0x0178++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB991 ,Set/Clear Enable Bit 991" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB990 ,Set/Clear Enable Bit 990" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB989 ,Set/Clear Enable Bit 989" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB988 ,Set/Clear Enable Bit 988" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB987 ,Set/Clear Enable Bit 987" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB986 ,Set/Clear Enable Bit 986" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB985 ,Set/Clear Enable Bit 985" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB984 ,Set/Clear Enable Bit 984" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB983 ,Set/Clear Enable Bit 983" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB982 ,Set/Clear Enable Bit 982" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB981 ,Set/Clear Enable Bit 981" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB980 ,Set/Clear Enable Bit 980" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB979 ,Set/Clear Enable Bit 979" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB978 ,Set/Clear Enable Bit 978" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB977 ,Set/Clear Enable Bit 977" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB976 ,Set/Clear Enable Bit 976" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB975 ,Set/Clear Enable Bit 975" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB974 ,Set/Clear Enable Bit 974" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB973 ,Set/Clear Enable Bit 973" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB972 ,Set/Clear Enable Bit 972" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB971 ,Set/Clear Enable Bit 971" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB970 ,Set/Clear Enable Bit 970" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB969 ,Set/Clear Enable Bit 969" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB968 ,Set/Clear Enable Bit 968" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB967 ,Set/Clear Enable Bit 967" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB966 ,Set/Clear Enable Bit 966" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB965 ,Set/Clear Enable Bit 965" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB964 ,Set/Clear Enable Bit 964" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB963 ,Set/Clear Enable Bit 963" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB962 ,Set/Clear Enable Bit 962" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB961 ,Set/Clear Enable Bit 961" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB960 ,Set/Clear Enable Bit 960" "Disabled,Enabled" else hgroup.long 0x0178++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)==0x1F) group.long 0x017C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER31,Interrupt Set/Clear Enable Register 31" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB1019 ,Set/Clear Enable Bit 1019" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB1018 ,Set/Clear Enable Bit 1018" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB1017 ,Set/Clear Enable Bit 1017" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB1016 ,Set/Clear Enable Bit 1016" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB1015 ,Set/Clear Enable Bit 1015" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB1014 ,Set/Clear Enable Bit 1014" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB1013 ,Set/Clear Enable Bit 1013" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB1012 ,Set/Clear Enable Bit 1012" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB1011 ,Set/Clear Enable Bit 1011" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB1010 ,Set/Clear Enable Bit 1010" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB1009 ,Set/Clear Enable Bit 1009" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB1008 ,Set/Clear Enable Bit 1008" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB1007 ,Set/Clear Enable Bit 1007" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB1006 ,Set/Clear Enable Bit 1006" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB1005 ,Set/Clear Enable Bit 1005" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB1004 ,Set/Clear Enable Bit 1004" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB1003 ,Set/Clear Enable Bit 1003" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB1002 ,Set/Clear Enable Bit 1002" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB1001 ,Set/Clear Enable Bit 1001" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB1000 ,Set/Clear Enable Bit 1000" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB999 ,Set/Clear Enable Bit 999" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB998 ,Set/Clear Enable Bit 998" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB997 ,Set/Clear Enable Bit 997" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB996 ,Set/Clear Enable Bit 996" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB995 ,Set/Clear Enable Bit 995" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB994 ,Set/Clear Enable Bit 994" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB993 ,Set/Clear Enable Bit 993" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB992 ,Set/Clear Enable Bit 992" "Disabled,Enabled" else hgroup.long 0x017C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER31,Interrupt Set/Clear Enable Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 22. tree "Set/Clear Pending Registers" group.long 0x0200++0x03 line.long 0x0 "GICD_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND31 ,Set/Clear Pending Bit 31" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND30 ,Set/Clear Pending Bit 30" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND29 ,Set/Clear Pending Bit 29" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND28 ,Set/Clear Pending Bit 28" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND27 ,Set/Clear Pending Bit 27" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND26 ,Set/Clear Pending Bit 26" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND25 ,Set/Clear Pending Bit 25" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND24 ,Set/Clear Pending Bit 24" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND23 ,Set/Clear Pending Bit 23" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND22 ,Set/Clear Pending Bit 22" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND21 ,Set/Clear Pending Bit 21" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND20 ,Set/Clear Pending Bit 20" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND19 ,Set/Clear Pending Bit 19" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND18 ,Set/Clear Pending Bit 18" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND17 ,Set/Clear Pending Bit 17" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND16 ,Set/Clear Pending Bit 16" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND15 ,Set/Clear Pending Bit 15" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND14 ,Set/Clear Pending Bit 14" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND13 ,Set/Clear Pending Bit 13" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND12 ,Set/Clear Pending Bit 12" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND11 ,Set/Clear Pending Bit 11" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND10 ,Set/Clear Pending Bit 10" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND9 ,Set/Clear Pending Bit 9" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND8 ,Set/Clear Pending Bit 8" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND7 ,Set/Clear Pending Bit 7" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND6 ,Set/Clear Pending Bit 6" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND5 ,Set/Clear Pending Bit 5" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND4 ,Set/Clear Pending Bit 4" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND3 ,Set/Clear Pending Bit 3" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND2 ,Set/Clear Pending Bit 2" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND1 ,Set/Clear Pending Bit 1" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND0 ,Set/Clear Pending Bit 0" "Disabled,Enabled" if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x01) group.long 0x0204++0x03 line.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND63 ,Set/Clear Pending Bit 63" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND62 ,Set/Clear Pending Bit 62" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND61 ,Set/Clear Pending Bit 61" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND60 ,Set/Clear Pending Bit 60" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND59 ,Set/Clear Pending Bit 59" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND58 ,Set/Clear Pending Bit 58" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND57 ,Set/Clear Pending Bit 57" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND56 ,Set/Clear Pending Bit 56" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND55 ,Set/Clear Pending Bit 55" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND54 ,Set/Clear Pending Bit 54" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND53 ,Set/Clear Pending Bit 53" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND52 ,Set/Clear Pending Bit 52" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND51 ,Set/Clear Pending Bit 51" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND50 ,Set/Clear Pending Bit 50" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND49 ,Set/Clear Pending Bit 49" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND48 ,Set/Clear Pending Bit 48" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND47 ,Set/Clear Pending Bit 47" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND46 ,Set/Clear Pending Bit 46" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND45 ,Set/Clear Pending Bit 45" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND44 ,Set/Clear Pending Bit 44" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND43 ,Set/Clear Pending Bit 43" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND42 ,Set/Clear Pending Bit 42" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND41 ,Set/Clear Pending Bit 41" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND40 ,Set/Clear Pending Bit 40" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND39 ,Set/Clear Pending Bit 39" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND38 ,Set/Clear Pending Bit 38" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND37 ,Set/Clear Pending Bit 37" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND36 ,Set/Clear Pending Bit 36" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND35 ,Set/Clear Pending Bit 35" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND34 ,Set/Clear Pending Bit 34" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND33 ,Set/Clear Pending Bit 33" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND32 ,Set/Clear Pending Bit 32" "Disabled,Enabled" else hgroup.long 0x0204++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x02) group.long 0x0208++0x03 line.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND95 ,Set/Clear Pending Bit 95" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND94 ,Set/Clear Pending Bit 94" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND93 ,Set/Clear Pending Bit 93" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND92 ,Set/Clear Pending Bit 92" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND91 ,Set/Clear Pending Bit 91" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND90 ,Set/Clear Pending Bit 90" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND89 ,Set/Clear Pending Bit 89" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND88 ,Set/Clear Pending Bit 88" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND87 ,Set/Clear Pending Bit 87" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND86 ,Set/Clear Pending Bit 86" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND85 ,Set/Clear Pending Bit 85" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND84 ,Set/Clear Pending Bit 84" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND83 ,Set/Clear Pending Bit 83" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND82 ,Set/Clear Pending Bit 82" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND81 ,Set/Clear Pending Bit 81" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND80 ,Set/Clear Pending Bit 80" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND79 ,Set/Clear Pending Bit 79" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND78 ,Set/Clear Pending Bit 78" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND77 ,Set/Clear Pending Bit 77" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND76 ,Set/Clear Pending Bit 76" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND75 ,Set/Clear Pending Bit 75" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND74 ,Set/Clear Pending Bit 74" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND73 ,Set/Clear Pending Bit 73" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND72 ,Set/Clear Pending Bit 72" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND71 ,Set/Clear Pending Bit 71" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND70 ,Set/Clear Pending Bit 70" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND69 ,Set/Clear Pending Bit 69" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND68 ,Set/Clear Pending Bit 68" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND67 ,Set/Clear Pending Bit 67" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND66 ,Set/Clear Pending Bit 66" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND65 ,Set/Clear Pending Bit 65" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND64 ,Set/Clear Pending Bit 64" "Disabled,Enabled" else hgroup.long 0x0208++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x03) group.long 0x020C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND127 ,Set/Clear Pending Bit 127" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND126 ,Set/Clear Pending Bit 126" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND125 ,Set/Clear Pending Bit 125" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND124 ,Set/Clear Pending Bit 124" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND123 ,Set/Clear Pending Bit 123" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND122 ,Set/Clear Pending Bit 122" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND121 ,Set/Clear Pending Bit 121" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND120 ,Set/Clear Pending Bit 120" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND119 ,Set/Clear Pending Bit 119" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND118 ,Set/Clear Pending Bit 118" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND117 ,Set/Clear Pending Bit 117" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND116 ,Set/Clear Pending Bit 116" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND115 ,Set/Clear Pending Bit 115" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND114 ,Set/Clear Pending Bit 114" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND113 ,Set/Clear Pending Bit 113" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND112 ,Set/Clear Pending Bit 112" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND111 ,Set/Clear Pending Bit 111" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND110 ,Set/Clear Pending Bit 110" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND109 ,Set/Clear Pending Bit 109" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND108 ,Set/Clear Pending Bit 108" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND107 ,Set/Clear Pending Bit 107" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND106 ,Set/Clear Pending Bit 106" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND105 ,Set/Clear Pending Bit 105" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND104 ,Set/Clear Pending Bit 104" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND103 ,Set/Clear Pending Bit 103" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND102 ,Set/Clear Pending Bit 102" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND101 ,Set/Clear Pending Bit 101" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND100 ,Set/Clear Pending Bit 100" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND99 ,Set/Clear Pending Bit 99" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND98 ,Set/Clear Pending Bit 98" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND97 ,Set/Clear Pending Bit 97" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND96 ,Set/Clear Pending Bit 96" "Disabled,Enabled" else hgroup.long 0x020C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x04) group.long 0x0210++0x03 line.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND159 ,Set/Clear Pending Bit 159" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND158 ,Set/Clear Pending Bit 158" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND157 ,Set/Clear Pending Bit 157" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND156 ,Set/Clear Pending Bit 156" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND155 ,Set/Clear Pending Bit 155" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND154 ,Set/Clear Pending Bit 154" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND153 ,Set/Clear Pending Bit 153" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND152 ,Set/Clear Pending Bit 152" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND151 ,Set/Clear Pending Bit 151" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND150 ,Set/Clear Pending Bit 150" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND149 ,Set/Clear Pending Bit 149" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND148 ,Set/Clear Pending Bit 148" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND147 ,Set/Clear Pending Bit 147" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND146 ,Set/Clear Pending Bit 146" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND145 ,Set/Clear Pending Bit 145" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND144 ,Set/Clear Pending Bit 144" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND143 ,Set/Clear Pending Bit 143" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND142 ,Set/Clear Pending Bit 142" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND141 ,Set/Clear Pending Bit 141" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND140 ,Set/Clear Pending Bit 140" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND139 ,Set/Clear Pending Bit 139" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND138 ,Set/Clear Pending Bit 138" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND137 ,Set/Clear Pending Bit 137" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND136 ,Set/Clear Pending Bit 136" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND135 ,Set/Clear Pending Bit 135" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND134 ,Set/Clear Pending Bit 134" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND133 ,Set/Clear Pending Bit 133" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND132 ,Set/Clear Pending Bit 132" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND131 ,Set/Clear Pending Bit 131" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND130 ,Set/Clear Pending Bit 130" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND129 ,Set/Clear Pending Bit 129" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND128 ,Set/Clear Pending Bit 128" "Disabled,Enabled" else hgroup.long 0x0210++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x05) group.long 0x0214++0x03 line.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND191 ,Set/Clear Pending Bit 191" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND190 ,Set/Clear Pending Bit 190" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND189 ,Set/Clear Pending Bit 189" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND188 ,Set/Clear Pending Bit 188" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND187 ,Set/Clear Pending Bit 187" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND186 ,Set/Clear Pending Bit 186" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND185 ,Set/Clear Pending Bit 185" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND184 ,Set/Clear Pending Bit 184" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND183 ,Set/Clear Pending Bit 183" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND182 ,Set/Clear Pending Bit 182" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND181 ,Set/Clear Pending Bit 181" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND180 ,Set/Clear Pending Bit 180" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND179 ,Set/Clear Pending Bit 179" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND178 ,Set/Clear Pending Bit 178" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND177 ,Set/Clear Pending Bit 177" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND176 ,Set/Clear Pending Bit 176" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND175 ,Set/Clear Pending Bit 175" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND174 ,Set/Clear Pending Bit 174" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND173 ,Set/Clear Pending Bit 173" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND172 ,Set/Clear Pending Bit 172" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND171 ,Set/Clear Pending Bit 171" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND170 ,Set/Clear Pending Bit 170" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND169 ,Set/Clear Pending Bit 169" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND168 ,Set/Clear Pending Bit 168" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND167 ,Set/Clear Pending Bit 167" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND166 ,Set/Clear Pending Bit 166" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND165 ,Set/Clear Pending Bit 165" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND164 ,Set/Clear Pending Bit 164" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND163 ,Set/Clear Pending Bit 163" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND162 ,Set/Clear Pending Bit 162" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND161 ,Set/Clear Pending Bit 161" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND160 ,Set/Clear Pending Bit 160" "Disabled,Enabled" else hgroup.long 0x0214++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x06) group.long 0x0218++0x03 line.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND223 ,Set/Clear Pending Bit 223" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND222 ,Set/Clear Pending Bit 222" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND221 ,Set/Clear Pending Bit 221" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND220 ,Set/Clear Pending Bit 220" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND219 ,Set/Clear Pending Bit 219" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND218 ,Set/Clear Pending Bit 218" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND217 ,Set/Clear Pending Bit 217" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND216 ,Set/Clear Pending Bit 216" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND215 ,Set/Clear Pending Bit 215" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND214 ,Set/Clear Pending Bit 214" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND213 ,Set/Clear Pending Bit 213" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND212 ,Set/Clear Pending Bit 212" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND211 ,Set/Clear Pending Bit 211" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND210 ,Set/Clear Pending Bit 210" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND209 ,Set/Clear Pending Bit 209" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND208 ,Set/Clear Pending Bit 208" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND207 ,Set/Clear Pending Bit 207" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND206 ,Set/Clear Pending Bit 206" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND205 ,Set/Clear Pending Bit 205" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND204 ,Set/Clear Pending Bit 204" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND203 ,Set/Clear Pending Bit 203" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND202 ,Set/Clear Pending Bit 202" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND201 ,Set/Clear Pending Bit 201" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND200 ,Set/Clear Pending Bit 200" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND199 ,Set/Clear Pending Bit 199" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND198 ,Set/Clear Pending Bit 198" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND197 ,Set/Clear Pending Bit 197" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND196 ,Set/Clear Pending Bit 196" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND195 ,Set/Clear Pending Bit 195" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND194 ,Set/Clear Pending Bit 194" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND193 ,Set/Clear Pending Bit 193" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND192 ,Set/Clear Pending Bit 192" "Disabled,Enabled" else hgroup.long 0x0218++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x07) group.long 0x021C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND255 ,Set/Clear Pending Bit 255" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND254 ,Set/Clear Pending Bit 254" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND253 ,Set/Clear Pending Bit 253" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND252 ,Set/Clear Pending Bit 252" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND251 ,Set/Clear Pending Bit 251" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND250 ,Set/Clear Pending Bit 250" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND249 ,Set/Clear Pending Bit 249" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND248 ,Set/Clear Pending Bit 248" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND247 ,Set/Clear Pending Bit 247" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND246 ,Set/Clear Pending Bit 246" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND245 ,Set/Clear Pending Bit 245" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND244 ,Set/Clear Pending Bit 244" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND243 ,Set/Clear Pending Bit 243" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND242 ,Set/Clear Pending Bit 242" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND241 ,Set/Clear Pending Bit 241" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND240 ,Set/Clear Pending Bit 240" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND239 ,Set/Clear Pending Bit 239" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND238 ,Set/Clear Pending Bit 238" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND237 ,Set/Clear Pending Bit 237" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND236 ,Set/Clear Pending Bit 236" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND235 ,Set/Clear Pending Bit 235" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND234 ,Set/Clear Pending Bit 234" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND233 ,Set/Clear Pending Bit 233" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND232 ,Set/Clear Pending Bit 232" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND231 ,Set/Clear Pending Bit 231" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND230 ,Set/Clear Pending Bit 230" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND229 ,Set/Clear Pending Bit 229" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND228 ,Set/Clear Pending Bit 228" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND227 ,Set/Clear Pending Bit 227" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND226 ,Set/Clear Pending Bit 226" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND225 ,Set/Clear Pending Bit 225" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND224 ,Set/Clear Pending Bit 224" "Disabled,Enabled" else hgroup.long 0x021C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x08) group.long 0x0220++0x03 line.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND287 ,Set/Clear Pending Bit 287" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND286 ,Set/Clear Pending Bit 286" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND285 ,Set/Clear Pending Bit 285" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND284 ,Set/Clear Pending Bit 284" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND283 ,Set/Clear Pending Bit 283" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND282 ,Set/Clear Pending Bit 282" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND281 ,Set/Clear Pending Bit 281" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND280 ,Set/Clear Pending Bit 280" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND279 ,Set/Clear Pending Bit 279" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND278 ,Set/Clear Pending Bit 278" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND277 ,Set/Clear Pending Bit 277" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND276 ,Set/Clear Pending Bit 276" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND275 ,Set/Clear Pending Bit 275" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND274 ,Set/Clear Pending Bit 274" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND273 ,Set/Clear Pending Bit 273" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND272 ,Set/Clear Pending Bit 272" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND271 ,Set/Clear Pending Bit 271" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND270 ,Set/Clear Pending Bit 270" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND269 ,Set/Clear Pending Bit 269" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND268 ,Set/Clear Pending Bit 268" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND267 ,Set/Clear Pending Bit 267" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND266 ,Set/Clear Pending Bit 266" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND265 ,Set/Clear Pending Bit 265" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND264 ,Set/Clear Pending Bit 264" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND263 ,Set/Clear Pending Bit 263" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND262 ,Set/Clear Pending Bit 262" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND261 ,Set/Clear Pending Bit 261" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND260 ,Set/Clear Pending Bit 260" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND259 ,Set/Clear Pending Bit 259" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND258 ,Set/Clear Pending Bit 258" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND257 ,Set/Clear Pending Bit 257" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND256 ,Set/Clear Pending Bit 256" "Disabled,Enabled" else hgroup.long 0x0220++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x09) group.long 0x0224++0x03 line.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND319 ,Set/Clear Pending Bit 319" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND318 ,Set/Clear Pending Bit 318" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND317 ,Set/Clear Pending Bit 317" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND316 ,Set/Clear Pending Bit 316" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND315 ,Set/Clear Pending Bit 315" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND314 ,Set/Clear Pending Bit 314" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND313 ,Set/Clear Pending Bit 313" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND312 ,Set/Clear Pending Bit 312" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND311 ,Set/Clear Pending Bit 311" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND310 ,Set/Clear Pending Bit 310" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND309 ,Set/Clear Pending Bit 309" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND308 ,Set/Clear Pending Bit 308" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND307 ,Set/Clear Pending Bit 307" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND306 ,Set/Clear Pending Bit 306" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND305 ,Set/Clear Pending Bit 305" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND304 ,Set/Clear Pending Bit 304" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND303 ,Set/Clear Pending Bit 303" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND302 ,Set/Clear Pending Bit 302" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND301 ,Set/Clear Pending Bit 301" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND300 ,Set/Clear Pending Bit 300" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND299 ,Set/Clear Pending Bit 299" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND298 ,Set/Clear Pending Bit 298" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND297 ,Set/Clear Pending Bit 297" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND296 ,Set/Clear Pending Bit 296" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND295 ,Set/Clear Pending Bit 295" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND294 ,Set/Clear Pending Bit 294" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND293 ,Set/Clear Pending Bit 293" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND292 ,Set/Clear Pending Bit 292" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND291 ,Set/Clear Pending Bit 291" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND290 ,Set/Clear Pending Bit 290" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND289 ,Set/Clear Pending Bit 289" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND288 ,Set/Clear Pending Bit 288" "Disabled,Enabled" else hgroup.long 0x0224++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0A) group.long 0x0228++0x03 line.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND351 ,Set/Clear Pending Bit 351" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND350 ,Set/Clear Pending Bit 350" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND349 ,Set/Clear Pending Bit 349" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND348 ,Set/Clear Pending Bit 348" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND347 ,Set/Clear Pending Bit 347" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND346 ,Set/Clear Pending Bit 346" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND345 ,Set/Clear Pending Bit 345" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND344 ,Set/Clear Pending Bit 344" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND343 ,Set/Clear Pending Bit 343" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND342 ,Set/Clear Pending Bit 342" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND341 ,Set/Clear Pending Bit 341" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND340 ,Set/Clear Pending Bit 340" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND339 ,Set/Clear Pending Bit 339" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND338 ,Set/Clear Pending Bit 338" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND337 ,Set/Clear Pending Bit 337" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND336 ,Set/Clear Pending Bit 336" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND335 ,Set/Clear Pending Bit 335" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND334 ,Set/Clear Pending Bit 334" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND333 ,Set/Clear Pending Bit 333" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND332 ,Set/Clear Pending Bit 332" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND331 ,Set/Clear Pending Bit 331" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND330 ,Set/Clear Pending Bit 330" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND329 ,Set/Clear Pending Bit 329" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND328 ,Set/Clear Pending Bit 328" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND327 ,Set/Clear Pending Bit 327" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND326 ,Set/Clear Pending Bit 326" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND325 ,Set/Clear Pending Bit 325" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND324 ,Set/Clear Pending Bit 324" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND323 ,Set/Clear Pending Bit 323" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND322 ,Set/Clear Pending Bit 322" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND321 ,Set/Clear Pending Bit 321" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND320 ,Set/Clear Pending Bit 320" "Disabled,Enabled" else hgroup.long 0x0228++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0B) group.long 0x022C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND383 ,Set/Clear Pending Bit 383" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND382 ,Set/Clear Pending Bit 382" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND381 ,Set/Clear Pending Bit 381" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND380 ,Set/Clear Pending Bit 380" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND379 ,Set/Clear Pending Bit 379" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND378 ,Set/Clear Pending Bit 378" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND377 ,Set/Clear Pending Bit 377" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND376 ,Set/Clear Pending Bit 376" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND375 ,Set/Clear Pending Bit 375" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND374 ,Set/Clear Pending Bit 374" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND373 ,Set/Clear Pending Bit 373" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND372 ,Set/Clear Pending Bit 372" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND371 ,Set/Clear Pending Bit 371" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND370 ,Set/Clear Pending Bit 370" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND369 ,Set/Clear Pending Bit 369" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND368 ,Set/Clear Pending Bit 368" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND367 ,Set/Clear Pending Bit 367" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND366 ,Set/Clear Pending Bit 366" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND365 ,Set/Clear Pending Bit 365" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND364 ,Set/Clear Pending Bit 364" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND363 ,Set/Clear Pending Bit 363" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND362 ,Set/Clear Pending Bit 362" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND361 ,Set/Clear Pending Bit 361" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND360 ,Set/Clear Pending Bit 360" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND359 ,Set/Clear Pending Bit 359" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND358 ,Set/Clear Pending Bit 358" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND357 ,Set/Clear Pending Bit 357" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND356 ,Set/Clear Pending Bit 356" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND355 ,Set/Clear Pending Bit 355" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND354 ,Set/Clear Pending Bit 354" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND353 ,Set/Clear Pending Bit 353" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND352 ,Set/Clear Pending Bit 352" "Disabled,Enabled" else hgroup.long 0x022C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0C) group.long 0x0230++0x03 line.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND415 ,Set/Clear Pending Bit 415" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND414 ,Set/Clear Pending Bit 414" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND413 ,Set/Clear Pending Bit 413" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND412 ,Set/Clear Pending Bit 412" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND411 ,Set/Clear Pending Bit 411" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND410 ,Set/Clear Pending Bit 410" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND409 ,Set/Clear Pending Bit 409" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND408 ,Set/Clear Pending Bit 408" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND407 ,Set/Clear Pending Bit 407" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND406 ,Set/Clear Pending Bit 406" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND405 ,Set/Clear Pending Bit 405" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND404 ,Set/Clear Pending Bit 404" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND403 ,Set/Clear Pending Bit 403" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND402 ,Set/Clear Pending Bit 402" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND401 ,Set/Clear Pending Bit 401" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND400 ,Set/Clear Pending Bit 400" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND399 ,Set/Clear Pending Bit 399" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND398 ,Set/Clear Pending Bit 398" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND397 ,Set/Clear Pending Bit 397" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND396 ,Set/Clear Pending Bit 396" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND395 ,Set/Clear Pending Bit 395" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND394 ,Set/Clear Pending Bit 394" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND393 ,Set/Clear Pending Bit 393" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND392 ,Set/Clear Pending Bit 392" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND391 ,Set/Clear Pending Bit 391" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND390 ,Set/Clear Pending Bit 390" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND389 ,Set/Clear Pending Bit 389" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND388 ,Set/Clear Pending Bit 388" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND387 ,Set/Clear Pending Bit 387" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND386 ,Set/Clear Pending Bit 386" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND385 ,Set/Clear Pending Bit 385" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND384 ,Set/Clear Pending Bit 384" "Disabled,Enabled" else hgroup.long 0x0230++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0D) group.long 0x0234++0x03 line.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND447 ,Set/Clear Pending Bit 447" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND446 ,Set/Clear Pending Bit 446" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND445 ,Set/Clear Pending Bit 445" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND444 ,Set/Clear Pending Bit 444" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND443 ,Set/Clear Pending Bit 443" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND442 ,Set/Clear Pending Bit 442" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND441 ,Set/Clear Pending Bit 441" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND440 ,Set/Clear Pending Bit 440" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND439 ,Set/Clear Pending Bit 439" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND438 ,Set/Clear Pending Bit 438" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND437 ,Set/Clear Pending Bit 437" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND436 ,Set/Clear Pending Bit 436" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND435 ,Set/Clear Pending Bit 435" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND434 ,Set/Clear Pending Bit 434" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND433 ,Set/Clear Pending Bit 433" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND432 ,Set/Clear Pending Bit 432" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND431 ,Set/Clear Pending Bit 431" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND430 ,Set/Clear Pending Bit 430" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND429 ,Set/Clear Pending Bit 429" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND428 ,Set/Clear Pending Bit 428" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND427 ,Set/Clear Pending Bit 427" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND426 ,Set/Clear Pending Bit 426" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND425 ,Set/Clear Pending Bit 425" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND424 ,Set/Clear Pending Bit 424" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND423 ,Set/Clear Pending Bit 423" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND422 ,Set/Clear Pending Bit 422" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND421 ,Set/Clear Pending Bit 421" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND420 ,Set/Clear Pending Bit 420" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND419 ,Set/Clear Pending Bit 419" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND418 ,Set/Clear Pending Bit 418" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND417 ,Set/Clear Pending Bit 417" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND416 ,Set/Clear Pending Bit 416" "Disabled,Enabled" else hgroup.long 0x0234++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0E) group.long 0x0238++0x03 line.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND479 ,Set/Clear Pending Bit 479" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND478 ,Set/Clear Pending Bit 478" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND477 ,Set/Clear Pending Bit 477" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND476 ,Set/Clear Pending Bit 476" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND475 ,Set/Clear Pending Bit 475" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND474 ,Set/Clear Pending Bit 474" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND473 ,Set/Clear Pending Bit 473" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND472 ,Set/Clear Pending Bit 472" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND471 ,Set/Clear Pending Bit 471" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND470 ,Set/Clear Pending Bit 470" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND469 ,Set/Clear Pending Bit 469" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND468 ,Set/Clear Pending Bit 468" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND467 ,Set/Clear Pending Bit 467" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND466 ,Set/Clear Pending Bit 466" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND465 ,Set/Clear Pending Bit 465" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND464 ,Set/Clear Pending Bit 464" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND463 ,Set/Clear Pending Bit 463" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND462 ,Set/Clear Pending Bit 462" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND461 ,Set/Clear Pending Bit 461" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND460 ,Set/Clear Pending Bit 460" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND459 ,Set/Clear Pending Bit 459" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND458 ,Set/Clear Pending Bit 458" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND457 ,Set/Clear Pending Bit 457" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND456 ,Set/Clear Pending Bit 456" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND455 ,Set/Clear Pending Bit 455" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND454 ,Set/Clear Pending Bit 454" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND453 ,Set/Clear Pending Bit 453" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND452 ,Set/Clear Pending Bit 452" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND451 ,Set/Clear Pending Bit 451" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND450 ,Set/Clear Pending Bit 450" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND449 ,Set/Clear Pending Bit 449" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND448 ,Set/Clear Pending Bit 448" "Disabled,Enabled" else hgroup.long 0x0238++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0F) group.long 0x023C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND511 ,Set/Clear Pending Bit 511" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND510 ,Set/Clear Pending Bit 510" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND509 ,Set/Clear Pending Bit 509" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND508 ,Set/Clear Pending Bit 508" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND507 ,Set/Clear Pending Bit 507" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND506 ,Set/Clear Pending Bit 506" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND505 ,Set/Clear Pending Bit 505" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND504 ,Set/Clear Pending Bit 504" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND503 ,Set/Clear Pending Bit 503" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND502 ,Set/Clear Pending Bit 502" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND501 ,Set/Clear Pending Bit 501" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND500 ,Set/Clear Pending Bit 500" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND499 ,Set/Clear Pending Bit 499" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND498 ,Set/Clear Pending Bit 498" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND497 ,Set/Clear Pending Bit 497" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND496 ,Set/Clear Pending Bit 496" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND495 ,Set/Clear Pending Bit 495" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND494 ,Set/Clear Pending Bit 494" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND493 ,Set/Clear Pending Bit 493" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND492 ,Set/Clear Pending Bit 492" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND491 ,Set/Clear Pending Bit 491" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND490 ,Set/Clear Pending Bit 490" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND489 ,Set/Clear Pending Bit 489" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND488 ,Set/Clear Pending Bit 488" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND487 ,Set/Clear Pending Bit 487" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND486 ,Set/Clear Pending Bit 486" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND485 ,Set/Clear Pending Bit 485" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND484 ,Set/Clear Pending Bit 484" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND483 ,Set/Clear Pending Bit 483" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND482 ,Set/Clear Pending Bit 482" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND481 ,Set/Clear Pending Bit 481" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND480 ,Set/Clear Pending Bit 480" "Disabled,Enabled" else hgroup.long 0x023C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x10) group.long 0x0240++0x03 line.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND543 ,Set/Clear Pending Bit 543" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND542 ,Set/Clear Pending Bit 542" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND541 ,Set/Clear Pending Bit 541" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND540 ,Set/Clear Pending Bit 540" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND539 ,Set/Clear Pending Bit 539" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND538 ,Set/Clear Pending Bit 538" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND537 ,Set/Clear Pending Bit 537" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND536 ,Set/Clear Pending Bit 536" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND535 ,Set/Clear Pending Bit 535" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND534 ,Set/Clear Pending Bit 534" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND533 ,Set/Clear Pending Bit 533" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND532 ,Set/Clear Pending Bit 532" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND531 ,Set/Clear Pending Bit 531" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND530 ,Set/Clear Pending Bit 530" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND529 ,Set/Clear Pending Bit 529" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND528 ,Set/Clear Pending Bit 528" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND527 ,Set/Clear Pending Bit 527" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND526 ,Set/Clear Pending Bit 526" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND525 ,Set/Clear Pending Bit 525" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND524 ,Set/Clear Pending Bit 524" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND523 ,Set/Clear Pending Bit 523" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND522 ,Set/Clear Pending Bit 522" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND521 ,Set/Clear Pending Bit 521" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND520 ,Set/Clear Pending Bit 520" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND519 ,Set/Clear Pending Bit 519" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND518 ,Set/Clear Pending Bit 518" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND517 ,Set/Clear Pending Bit 517" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND516 ,Set/Clear Pending Bit 516" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND515 ,Set/Clear Pending Bit 515" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND514 ,Set/Clear Pending Bit 514" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND513 ,Set/Clear Pending Bit 513" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND512 ,Set/Clear Pending Bit 512" "Disabled,Enabled" else hgroup.long 0x0240++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x11) group.long 0x0244++0x03 line.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND575 ,Set/Clear Pending Bit 575" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND574 ,Set/Clear Pending Bit 574" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND573 ,Set/Clear Pending Bit 573" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND572 ,Set/Clear Pending Bit 572" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND571 ,Set/Clear Pending Bit 571" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND570 ,Set/Clear Pending Bit 570" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND569 ,Set/Clear Pending Bit 569" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND568 ,Set/Clear Pending Bit 568" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND567 ,Set/Clear Pending Bit 567" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND566 ,Set/Clear Pending Bit 566" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND565 ,Set/Clear Pending Bit 565" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND564 ,Set/Clear Pending Bit 564" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND563 ,Set/Clear Pending Bit 563" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND562 ,Set/Clear Pending Bit 562" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND561 ,Set/Clear Pending Bit 561" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND560 ,Set/Clear Pending Bit 560" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND559 ,Set/Clear Pending Bit 559" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND558 ,Set/Clear Pending Bit 558" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND557 ,Set/Clear Pending Bit 557" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND556 ,Set/Clear Pending Bit 556" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND555 ,Set/Clear Pending Bit 555" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND554 ,Set/Clear Pending Bit 554" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND553 ,Set/Clear Pending Bit 553" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND552 ,Set/Clear Pending Bit 552" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND551 ,Set/Clear Pending Bit 551" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND550 ,Set/Clear Pending Bit 550" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND549 ,Set/Clear Pending Bit 549" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND548 ,Set/Clear Pending Bit 548" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND547 ,Set/Clear Pending Bit 547" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND546 ,Set/Clear Pending Bit 546" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND545 ,Set/Clear Pending Bit 545" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND544 ,Set/Clear Pending Bit 544" "Disabled,Enabled" else hgroup.long 0x0244++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x12) group.long 0x0248++0x03 line.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND607 ,Set/Clear Pending Bit 607" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND606 ,Set/Clear Pending Bit 606" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND605 ,Set/Clear Pending Bit 605" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND604 ,Set/Clear Pending Bit 604" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND603 ,Set/Clear Pending Bit 603" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND602 ,Set/Clear Pending Bit 602" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND601 ,Set/Clear Pending Bit 601" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND600 ,Set/Clear Pending Bit 600" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND599 ,Set/Clear Pending Bit 599" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND598 ,Set/Clear Pending Bit 598" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND597 ,Set/Clear Pending Bit 597" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND596 ,Set/Clear Pending Bit 596" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND595 ,Set/Clear Pending Bit 595" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND594 ,Set/Clear Pending Bit 594" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND593 ,Set/Clear Pending Bit 593" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND592 ,Set/Clear Pending Bit 592" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND591 ,Set/Clear Pending Bit 591" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND590 ,Set/Clear Pending Bit 590" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND589 ,Set/Clear Pending Bit 589" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND588 ,Set/Clear Pending Bit 588" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND587 ,Set/Clear Pending Bit 587" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND586 ,Set/Clear Pending Bit 586" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND585 ,Set/Clear Pending Bit 585" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND584 ,Set/Clear Pending Bit 584" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND583 ,Set/Clear Pending Bit 583" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND582 ,Set/Clear Pending Bit 582" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND581 ,Set/Clear Pending Bit 581" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND580 ,Set/Clear Pending Bit 580" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND579 ,Set/Clear Pending Bit 579" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND578 ,Set/Clear Pending Bit 578" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND577 ,Set/Clear Pending Bit 577" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND576 ,Set/Clear Pending Bit 576" "Disabled,Enabled" else hgroup.long 0x0248++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x13) group.long 0x024C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND639 ,Set/Clear Pending Bit 639" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND638 ,Set/Clear Pending Bit 638" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND637 ,Set/Clear Pending Bit 637" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND636 ,Set/Clear Pending Bit 636" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND635 ,Set/Clear Pending Bit 635" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND634 ,Set/Clear Pending Bit 634" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND633 ,Set/Clear Pending Bit 633" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND632 ,Set/Clear Pending Bit 632" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND631 ,Set/Clear Pending Bit 631" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND630 ,Set/Clear Pending Bit 630" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND629 ,Set/Clear Pending Bit 629" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND628 ,Set/Clear Pending Bit 628" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND627 ,Set/Clear Pending Bit 627" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND626 ,Set/Clear Pending Bit 626" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND625 ,Set/Clear Pending Bit 625" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND624 ,Set/Clear Pending Bit 624" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND623 ,Set/Clear Pending Bit 623" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND622 ,Set/Clear Pending Bit 622" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND621 ,Set/Clear Pending Bit 621" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND620 ,Set/Clear Pending Bit 620" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND619 ,Set/Clear Pending Bit 619" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND618 ,Set/Clear Pending Bit 618" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND617 ,Set/Clear Pending Bit 617" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND616 ,Set/Clear Pending Bit 616" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND615 ,Set/Clear Pending Bit 615" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND614 ,Set/Clear Pending Bit 614" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND613 ,Set/Clear Pending Bit 613" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND612 ,Set/Clear Pending Bit 612" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND611 ,Set/Clear Pending Bit 611" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND610 ,Set/Clear Pending Bit 610" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND609 ,Set/Clear Pending Bit 609" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND608 ,Set/Clear Pending Bit 608" "Disabled,Enabled" else hgroup.long 0x024C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x14) group.long 0x0250++0x03 line.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND671 ,Set/Clear Pending Bit 671" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND670 ,Set/Clear Pending Bit 670" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND669 ,Set/Clear Pending Bit 669" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND668 ,Set/Clear Pending Bit 668" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND667 ,Set/Clear Pending Bit 667" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND666 ,Set/Clear Pending Bit 666" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND665 ,Set/Clear Pending Bit 665" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND664 ,Set/Clear Pending Bit 664" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND663 ,Set/Clear Pending Bit 663" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND662 ,Set/Clear Pending Bit 662" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND661 ,Set/Clear Pending Bit 661" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND660 ,Set/Clear Pending Bit 660" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND659 ,Set/Clear Pending Bit 659" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND658 ,Set/Clear Pending Bit 658" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND657 ,Set/Clear Pending Bit 657" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND656 ,Set/Clear Pending Bit 656" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND655 ,Set/Clear Pending Bit 655" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND654 ,Set/Clear Pending Bit 654" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND653 ,Set/Clear Pending Bit 653" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND652 ,Set/Clear Pending Bit 652" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND651 ,Set/Clear Pending Bit 651" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND650 ,Set/Clear Pending Bit 650" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND649 ,Set/Clear Pending Bit 649" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND648 ,Set/Clear Pending Bit 648" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND647 ,Set/Clear Pending Bit 647" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND646 ,Set/Clear Pending Bit 646" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND645 ,Set/Clear Pending Bit 645" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND644 ,Set/Clear Pending Bit 644" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND643 ,Set/Clear Pending Bit 643" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND642 ,Set/Clear Pending Bit 642" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND641 ,Set/Clear Pending Bit 641" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND640 ,Set/Clear Pending Bit 640" "Disabled,Enabled" else hgroup.long 0x0250++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x15) group.long 0x0254++0x03 line.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND703 ,Set/Clear Pending Bit 703" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND702 ,Set/Clear Pending Bit 702" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND701 ,Set/Clear Pending Bit 701" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND700 ,Set/Clear Pending Bit 700" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND699 ,Set/Clear Pending Bit 699" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND698 ,Set/Clear Pending Bit 698" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND697 ,Set/Clear Pending Bit 697" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND696 ,Set/Clear Pending Bit 696" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND695 ,Set/Clear Pending Bit 695" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND694 ,Set/Clear Pending Bit 694" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND693 ,Set/Clear Pending Bit 693" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND692 ,Set/Clear Pending Bit 692" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND691 ,Set/Clear Pending Bit 691" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND690 ,Set/Clear Pending Bit 690" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND689 ,Set/Clear Pending Bit 689" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND688 ,Set/Clear Pending Bit 688" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND687 ,Set/Clear Pending Bit 687" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND686 ,Set/Clear Pending Bit 686" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND685 ,Set/Clear Pending Bit 685" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND684 ,Set/Clear Pending Bit 684" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND683 ,Set/Clear Pending Bit 683" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND682 ,Set/Clear Pending Bit 682" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND681 ,Set/Clear Pending Bit 681" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND680 ,Set/Clear Pending Bit 680" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND679 ,Set/Clear Pending Bit 679" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND678 ,Set/Clear Pending Bit 678" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND677 ,Set/Clear Pending Bit 677" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND676 ,Set/Clear Pending Bit 676" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND675 ,Set/Clear Pending Bit 675" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND674 ,Set/Clear Pending Bit 674" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND673 ,Set/Clear Pending Bit 673" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND672 ,Set/Clear Pending Bit 672" "Disabled,Enabled" else hgroup.long 0x0254++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x16) group.long 0x0258++0x03 line.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND735 ,Set/Clear Pending Bit 735" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND734 ,Set/Clear Pending Bit 734" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND733 ,Set/Clear Pending Bit 733" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND732 ,Set/Clear Pending Bit 732" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND731 ,Set/Clear Pending Bit 731" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND730 ,Set/Clear Pending Bit 730" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND729 ,Set/Clear Pending Bit 729" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND728 ,Set/Clear Pending Bit 728" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND727 ,Set/Clear Pending Bit 727" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND726 ,Set/Clear Pending Bit 726" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND725 ,Set/Clear Pending Bit 725" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND724 ,Set/Clear Pending Bit 724" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND723 ,Set/Clear Pending Bit 723" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND722 ,Set/Clear Pending Bit 722" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND721 ,Set/Clear Pending Bit 721" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND720 ,Set/Clear Pending Bit 720" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND719 ,Set/Clear Pending Bit 719" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND718 ,Set/Clear Pending Bit 718" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND717 ,Set/Clear Pending Bit 717" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND716 ,Set/Clear Pending Bit 716" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND715 ,Set/Clear Pending Bit 715" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND714 ,Set/Clear Pending Bit 714" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND713 ,Set/Clear Pending Bit 713" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND712 ,Set/Clear Pending Bit 712" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND711 ,Set/Clear Pending Bit 711" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND710 ,Set/Clear Pending Bit 710" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND709 ,Set/Clear Pending Bit 709" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND708 ,Set/Clear Pending Bit 708" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND707 ,Set/Clear Pending Bit 707" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND706 ,Set/Clear Pending Bit 706" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND705 ,Set/Clear Pending Bit 705" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND704 ,Set/Clear Pending Bit 704" "Disabled,Enabled" else hgroup.long 0x0258++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x17) group.long 0x025C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND767 ,Set/Clear Pending Bit 767" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND766 ,Set/Clear Pending Bit 766" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND765 ,Set/Clear Pending Bit 765" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND764 ,Set/Clear Pending Bit 764" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND763 ,Set/Clear Pending Bit 763" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND762 ,Set/Clear Pending Bit 762" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND761 ,Set/Clear Pending Bit 761" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND760 ,Set/Clear Pending Bit 760" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND759 ,Set/Clear Pending Bit 759" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND758 ,Set/Clear Pending Bit 758" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND757 ,Set/Clear Pending Bit 757" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND756 ,Set/Clear Pending Bit 756" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND755 ,Set/Clear Pending Bit 755" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND754 ,Set/Clear Pending Bit 754" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND753 ,Set/Clear Pending Bit 753" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND752 ,Set/Clear Pending Bit 752" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND751 ,Set/Clear Pending Bit 751" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND750 ,Set/Clear Pending Bit 750" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND749 ,Set/Clear Pending Bit 749" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND748 ,Set/Clear Pending Bit 748" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND747 ,Set/Clear Pending Bit 747" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND746 ,Set/Clear Pending Bit 746" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND745 ,Set/Clear Pending Bit 745" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND744 ,Set/Clear Pending Bit 744" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND743 ,Set/Clear Pending Bit 743" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND742 ,Set/Clear Pending Bit 742" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND741 ,Set/Clear Pending Bit 741" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND740 ,Set/Clear Pending Bit 740" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND739 ,Set/Clear Pending Bit 739" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND738 ,Set/Clear Pending Bit 738" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND737 ,Set/Clear Pending Bit 737" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND736 ,Set/Clear Pending Bit 736" "Disabled,Enabled" else hgroup.long 0x025C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x18) group.long 0x0260++0x03 line.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND799 ,Set/Clear Pending Bit 799" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND798 ,Set/Clear Pending Bit 798" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND797 ,Set/Clear Pending Bit 797" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND796 ,Set/Clear Pending Bit 796" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND795 ,Set/Clear Pending Bit 795" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND794 ,Set/Clear Pending Bit 794" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND793 ,Set/Clear Pending Bit 793" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND792 ,Set/Clear Pending Bit 792" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND791 ,Set/Clear Pending Bit 791" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND790 ,Set/Clear Pending Bit 790" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND789 ,Set/Clear Pending Bit 789" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND788 ,Set/Clear Pending Bit 788" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND787 ,Set/Clear Pending Bit 787" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND786 ,Set/Clear Pending Bit 786" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND785 ,Set/Clear Pending Bit 785" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND784 ,Set/Clear Pending Bit 784" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND783 ,Set/Clear Pending Bit 783" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND782 ,Set/Clear Pending Bit 782" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND781 ,Set/Clear Pending Bit 781" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND780 ,Set/Clear Pending Bit 780" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND779 ,Set/Clear Pending Bit 779" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND778 ,Set/Clear Pending Bit 778" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND777 ,Set/Clear Pending Bit 777" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND776 ,Set/Clear Pending Bit 776" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND775 ,Set/Clear Pending Bit 775" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND774 ,Set/Clear Pending Bit 774" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND773 ,Set/Clear Pending Bit 773" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND772 ,Set/Clear Pending Bit 772" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND771 ,Set/Clear Pending Bit 771" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND770 ,Set/Clear Pending Bit 770" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND769 ,Set/Clear Pending Bit 769" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND768 ,Set/Clear Pending Bit 768" "Disabled,Enabled" else hgroup.long 0x0260++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x19) group.long 0x0264++0x03 line.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND831 ,Set/Clear Pending Bit 831" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND830 ,Set/Clear Pending Bit 830" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND829 ,Set/Clear Pending Bit 829" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND828 ,Set/Clear Pending Bit 828" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND827 ,Set/Clear Pending Bit 827" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND826 ,Set/Clear Pending Bit 826" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND825 ,Set/Clear Pending Bit 825" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND824 ,Set/Clear Pending Bit 824" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND823 ,Set/Clear Pending Bit 823" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND822 ,Set/Clear Pending Bit 822" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND821 ,Set/Clear Pending Bit 821" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND820 ,Set/Clear Pending Bit 820" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND819 ,Set/Clear Pending Bit 819" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND818 ,Set/Clear Pending Bit 818" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND817 ,Set/Clear Pending Bit 817" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND816 ,Set/Clear Pending Bit 816" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND815 ,Set/Clear Pending Bit 815" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND814 ,Set/Clear Pending Bit 814" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND813 ,Set/Clear Pending Bit 813" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND812 ,Set/Clear Pending Bit 812" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND811 ,Set/Clear Pending Bit 811" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND810 ,Set/Clear Pending Bit 810" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND809 ,Set/Clear Pending Bit 809" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND808 ,Set/Clear Pending Bit 808" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND807 ,Set/Clear Pending Bit 807" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND806 ,Set/Clear Pending Bit 806" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND805 ,Set/Clear Pending Bit 805" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND804 ,Set/Clear Pending Bit 804" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND803 ,Set/Clear Pending Bit 803" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND802 ,Set/Clear Pending Bit 802" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND801 ,Set/Clear Pending Bit 801" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND800 ,Set/Clear Pending Bit 800" "Disabled,Enabled" else hgroup.long 0x0264++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1A) group.long 0x0268++0x03 line.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND863 ,Set/Clear Pending Bit 863" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND862 ,Set/Clear Pending Bit 862" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND861 ,Set/Clear Pending Bit 861" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND860 ,Set/Clear Pending Bit 860" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND859 ,Set/Clear Pending Bit 859" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND858 ,Set/Clear Pending Bit 858" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND857 ,Set/Clear Pending Bit 857" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND856 ,Set/Clear Pending Bit 856" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND855 ,Set/Clear Pending Bit 855" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND854 ,Set/Clear Pending Bit 854" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND853 ,Set/Clear Pending Bit 853" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND852 ,Set/Clear Pending Bit 852" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND851 ,Set/Clear Pending Bit 851" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND850 ,Set/Clear Pending Bit 850" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND849 ,Set/Clear Pending Bit 849" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND848 ,Set/Clear Pending Bit 848" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND847 ,Set/Clear Pending Bit 847" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND846 ,Set/Clear Pending Bit 846" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND845 ,Set/Clear Pending Bit 845" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND844 ,Set/Clear Pending Bit 844" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND843 ,Set/Clear Pending Bit 843" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND842 ,Set/Clear Pending Bit 842" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND841 ,Set/Clear Pending Bit 841" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND840 ,Set/Clear Pending Bit 840" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND839 ,Set/Clear Pending Bit 839" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND838 ,Set/Clear Pending Bit 838" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND837 ,Set/Clear Pending Bit 837" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND836 ,Set/Clear Pending Bit 836" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND835 ,Set/Clear Pending Bit 835" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND834 ,Set/Clear Pending Bit 834" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND833 ,Set/Clear Pending Bit 833" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND832 ,Set/Clear Pending Bit 832" "Disabled,Enabled" else hgroup.long 0x0268++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1B) group.long 0x026C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND895 ,Set/Clear Pending Bit 895" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND894 ,Set/Clear Pending Bit 894" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND893 ,Set/Clear Pending Bit 893" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND892 ,Set/Clear Pending Bit 892" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND891 ,Set/Clear Pending Bit 891" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND890 ,Set/Clear Pending Bit 890" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND889 ,Set/Clear Pending Bit 889" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND888 ,Set/Clear Pending Bit 888" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND887 ,Set/Clear Pending Bit 887" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND886 ,Set/Clear Pending Bit 886" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND885 ,Set/Clear Pending Bit 885" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND884 ,Set/Clear Pending Bit 884" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND883 ,Set/Clear Pending Bit 883" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND882 ,Set/Clear Pending Bit 882" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND881 ,Set/Clear Pending Bit 881" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND880 ,Set/Clear Pending Bit 880" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND879 ,Set/Clear Pending Bit 879" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND878 ,Set/Clear Pending Bit 878" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND877 ,Set/Clear Pending Bit 877" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND876 ,Set/Clear Pending Bit 876" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND875 ,Set/Clear Pending Bit 875" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND874 ,Set/Clear Pending Bit 874" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND873 ,Set/Clear Pending Bit 873" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND872 ,Set/Clear Pending Bit 872" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND871 ,Set/Clear Pending Bit 871" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND870 ,Set/Clear Pending Bit 870" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND869 ,Set/Clear Pending Bit 869" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND868 ,Set/Clear Pending Bit 868" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND867 ,Set/Clear Pending Bit 867" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND866 ,Set/Clear Pending Bit 866" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND865 ,Set/Clear Pending Bit 865" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND864 ,Set/Clear Pending Bit 864" "Disabled,Enabled" else hgroup.long 0x026C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1C) group.long 0x0270++0x03 line.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND927 ,Set/Clear Pending Bit 927" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND926 ,Set/Clear Pending Bit 926" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND925 ,Set/Clear Pending Bit 925" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND924 ,Set/Clear Pending Bit 924" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND923 ,Set/Clear Pending Bit 923" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND922 ,Set/Clear Pending Bit 922" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND921 ,Set/Clear Pending Bit 921" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND920 ,Set/Clear Pending Bit 920" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND919 ,Set/Clear Pending Bit 919" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND918 ,Set/Clear Pending Bit 918" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND917 ,Set/Clear Pending Bit 917" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND916 ,Set/Clear Pending Bit 916" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND915 ,Set/Clear Pending Bit 915" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND914 ,Set/Clear Pending Bit 914" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND913 ,Set/Clear Pending Bit 913" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND912 ,Set/Clear Pending Bit 912" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND911 ,Set/Clear Pending Bit 911" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND910 ,Set/Clear Pending Bit 910" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND909 ,Set/Clear Pending Bit 909" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND908 ,Set/Clear Pending Bit 908" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND907 ,Set/Clear Pending Bit 907" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND906 ,Set/Clear Pending Bit 906" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND905 ,Set/Clear Pending Bit 905" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND904 ,Set/Clear Pending Bit 904" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND903 ,Set/Clear Pending Bit 903" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND902 ,Set/Clear Pending Bit 902" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND901 ,Set/Clear Pending Bit 901" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND900 ,Set/Clear Pending Bit 900" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND899 ,Set/Clear Pending Bit 899" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND898 ,Set/Clear Pending Bit 898" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND897 ,Set/Clear Pending Bit 897" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND896 ,Set/Clear Pending Bit 896" "Disabled,Enabled" else hgroup.long 0x0270++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1D) group.long 0x0274++0x03 line.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND959 ,Set/Clear Pending Bit 959" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND958 ,Set/Clear Pending Bit 958" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND957 ,Set/Clear Pending Bit 957" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND956 ,Set/Clear Pending Bit 956" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND955 ,Set/Clear Pending Bit 955" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND954 ,Set/Clear Pending Bit 954" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND953 ,Set/Clear Pending Bit 953" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND952 ,Set/Clear Pending Bit 952" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND951 ,Set/Clear Pending Bit 951" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND950 ,Set/Clear Pending Bit 950" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND949 ,Set/Clear Pending Bit 949" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND948 ,Set/Clear Pending Bit 948" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND947 ,Set/Clear Pending Bit 947" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND946 ,Set/Clear Pending Bit 946" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND945 ,Set/Clear Pending Bit 945" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND944 ,Set/Clear Pending Bit 944" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND943 ,Set/Clear Pending Bit 943" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND942 ,Set/Clear Pending Bit 942" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND941 ,Set/Clear Pending Bit 941" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND940 ,Set/Clear Pending Bit 940" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND939 ,Set/Clear Pending Bit 939" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND938 ,Set/Clear Pending Bit 938" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND937 ,Set/Clear Pending Bit 937" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND936 ,Set/Clear Pending Bit 936" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND935 ,Set/Clear Pending Bit 935" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND934 ,Set/Clear Pending Bit 934" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND933 ,Set/Clear Pending Bit 933" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND932 ,Set/Clear Pending Bit 932" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND931 ,Set/Clear Pending Bit 931" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND930 ,Set/Clear Pending Bit 930" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND929 ,Set/Clear Pending Bit 929" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND928 ,Set/Clear Pending Bit 928" "Disabled,Enabled" else hgroup.long 0x0274++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1E) group.long 0x0278++0x03 line.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND991 ,Set/Clear Pending Bit 991" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND990 ,Set/Clear Pending Bit 990" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND989 ,Set/Clear Pending Bit 989" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND988 ,Set/Clear Pending Bit 988" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND987 ,Set/Clear Pending Bit 987" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND986 ,Set/Clear Pending Bit 986" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND985 ,Set/Clear Pending Bit 985" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND984 ,Set/Clear Pending Bit 984" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND983 ,Set/Clear Pending Bit 983" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND982 ,Set/Clear Pending Bit 982" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND981 ,Set/Clear Pending Bit 981" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND980 ,Set/Clear Pending Bit 980" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND979 ,Set/Clear Pending Bit 979" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND978 ,Set/Clear Pending Bit 978" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND977 ,Set/Clear Pending Bit 977" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND976 ,Set/Clear Pending Bit 976" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND975 ,Set/Clear Pending Bit 975" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND974 ,Set/Clear Pending Bit 974" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND973 ,Set/Clear Pending Bit 973" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND972 ,Set/Clear Pending Bit 972" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND971 ,Set/Clear Pending Bit 971" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND970 ,Set/Clear Pending Bit 970" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND969 ,Set/Clear Pending Bit 969" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND968 ,Set/Clear Pending Bit 968" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND967 ,Set/Clear Pending Bit 967" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND966 ,Set/Clear Pending Bit 966" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND965 ,Set/Clear Pending Bit 965" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND964 ,Set/Clear Pending Bit 964" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND963 ,Set/Clear Pending Bit 963" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND962 ,Set/Clear Pending Bit 962" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND961 ,Set/Clear Pending Bit 961" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND960 ,Set/Clear Pending Bit 960" "Disabled,Enabled" else hgroup.long 0x0278++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)==0x1F) group.long 0x027C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR31,Interrupt Set/Clear Pending Register 31" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND1019 ,Set/Clear Pending Bit 1019" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND1018 ,Set/Clear Pending Bit 1018" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND1017 ,Set/Clear Pending Bit 1017" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND1016 ,Set/Clear Pending Bit 1016" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND1015 ,Set/Clear Pending Bit 1015" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND1014 ,Set/Clear Pending Bit 1014" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND1013 ,Set/Clear Pending Bit 1013" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND1012 ,Set/Clear Pending Bit 1012" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND1011 ,Set/Clear Pending Bit 1011" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND1010 ,Set/Clear Pending Bit 1010" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND1009 ,Set/Clear Pending Bit 1009" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND1008 ,Set/Clear Pending Bit 1008" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND1007 ,Set/Clear Pending Bit 1007" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND1006 ,Set/Clear Pending Bit 1006" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND1005 ,Set/Clear Pending Bit 1005" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND1004 ,Set/Clear Pending Bit 1004" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND1003 ,Set/Clear Pending Bit 1003" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND1002 ,Set/Clear Pending Bit 1002" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND1001 ,Set/Clear Pending Bit 1001" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND1000 ,Set/Clear Pending Bit 1000" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND999 ,Set/Clear Pending Bit 999" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND998 ,Set/Clear Pending Bit 998" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND997 ,Set/Clear Pending Bit 997" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND996 ,Set/Clear Pending Bit 996" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND995 ,Set/Clear Pending Bit 995" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND994 ,Set/Clear Pending Bit 994" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND993 ,Set/Clear Pending Bit 993" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND992 ,Set/Clear Pending Bit 992" "Disabled,Enabled" else hgroup.long 0x027C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR31,Interrupt Set/Clear Pending Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 24. tree "Set/Clear Active Registers" rgroup.long 0x0300++0x03 line.long 0x0 "GICD_ICDABR0,Active Status Register 0" bitfld.long 0x00 31. " ASB31 ,Active Status Bit 31" "Not active,Active" bitfld.long 0x00 30. " ASB30 ,Active Status Bit 30" "Not active,Active" bitfld.long 0x00 29. " ASB29 ,Active Status Bit 29" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB28 ,Active Status Bit 28" "Not active,Active" bitfld.long 0x00 27. " ASB27 ,Active Status Bit 27" "Not active,Active" bitfld.long 0x00 26. " ASB26 ,Active Status Bit 26" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB25 ,Active Status Bit 25" "Not active,Active" bitfld.long 0x00 24. " ASB24 ,Active Status Bit 24" "Not active,Active" bitfld.long 0x00 23. " ASB23 ,Active Status Bit 23" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB22 ,Active Status Bit 22" "Not active,Active" bitfld.long 0x00 21. " ASB21 ,Active Status Bit 21" "Not active,Active" bitfld.long 0x00 20. " ASB20 ,Active Status Bit 20" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB19 ,Active Status Bit 19" "Not active,Active" bitfld.long 0x00 18. " ASB18 ,Active Status Bit 18" "Not active,Active" bitfld.long 0x00 17. " ASB17 ,Active Status Bit 17" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB16 ,Active Status Bit 16" "Not active,Active" bitfld.long 0x00 15. " ASB15 ,Active Status Bit 15" "Not active,Active" bitfld.long 0x00 14. " ASB14 ,Active Status Bit 14" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB13 ,Active Status Bit 13" "Not active,Active" bitfld.long 0x00 12. " ASB12 ,Active Status Bit 12" "Not active,Active" bitfld.long 0x00 11. " ASB11 ,Active Status Bit 11" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB10 ,Active Status Bit 10" "Not active,Active" bitfld.long 0x00 9. " ASB9 ,Active Status Bit 9" "Not active,Active" bitfld.long 0x00 8. " ASB8 ,Active Status Bit 8" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB7 ,Active Status Bit 7" "Not active,Active" bitfld.long 0x00 6. " ASB6 ,Active Status Bit 6" "Not active,Active" bitfld.long 0x00 5. " ASB5 ,Active Status Bit 5" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB4 ,Active Status Bit 4" "Not active,Active" bitfld.long 0x00 3. " ASB3 ,Active Status Bit 3" "Not active,Active" bitfld.long 0x00 2. " ASB2 ,Active Status Bit 2" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB1 ,Active Status Bit 1" "Not active,Active" bitfld.long 0x00 0. " ASB0 ,Active Status Bit 0" "Not active,Active" if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x01) rgroup.long 0x0304++0x03 line.long 0x0 "GICD_ICDABR1,Active Status Register 1" bitfld.long 0x00 31. " ASB63 ,Active Status Bit 63" "Not active,Active" bitfld.long 0x00 30. " ASB62 ,Active Status Bit 62" "Not active,Active" bitfld.long 0x00 29. " ASB61 ,Active Status Bit 61" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB60 ,Active Status Bit 60" "Not active,Active" bitfld.long 0x00 27. " ASB59 ,Active Status Bit 59" "Not active,Active" bitfld.long 0x00 26. " ASB58 ,Active Status Bit 58" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB57 ,Active Status Bit 57" "Not active,Active" bitfld.long 0x00 24. " ASB56 ,Active Status Bit 56" "Not active,Active" bitfld.long 0x00 23. " ASB55 ,Active Status Bit 55" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB54 ,Active Status Bit 54" "Not active,Active" bitfld.long 0x00 21. " ASB53 ,Active Status Bit 53" "Not active,Active" bitfld.long 0x00 20. " ASB52 ,Active Status Bit 52" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB51 ,Active Status Bit 51" "Not active,Active" bitfld.long 0x00 18. " ASB50 ,Active Status Bit 50" "Not active,Active" bitfld.long 0x00 17. " ASB49 ,Active Status Bit 49" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB48 ,Active Status Bit 48" "Not active,Active" bitfld.long 0x00 15. " ASB47 ,Active Status Bit 47" "Not active,Active" bitfld.long 0x00 14. " ASB46 ,Active Status Bit 46" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB45 ,Active Status Bit 45" "Not active,Active" bitfld.long 0x00 12. " ASB44 ,Active Status Bit 44" "Not active,Active" bitfld.long 0x00 11. " ASB43 ,Active Status Bit 43" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB42 ,Active Status Bit 42" "Not active,Active" bitfld.long 0x00 9. " ASB41 ,Active Status Bit 41" "Not active,Active" bitfld.long 0x00 8. " ASB40 ,Active Status Bit 40" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB39 ,Active Status Bit 39" "Not active,Active" bitfld.long 0x00 6. " ASB38 ,Active Status Bit 38" "Not active,Active" bitfld.long 0x00 5. " ASB37 ,Active Status Bit 37" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB36 ,Active Status Bit 36" "Not active,Active" bitfld.long 0x00 3. " ASB35 ,Active Status Bit 35" "Not active,Active" bitfld.long 0x00 2. " ASB34 ,Active Status Bit 34" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB33 ,Active Status Bit 33" "Not active,Active" bitfld.long 0x00 0. " ASB32 ,Active Status Bit 32" "Not active,Active" else hgroup.long 0x0304++0x03 hide.long 0x0 "GICD_ICDABR1,Active Status Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x02) rgroup.long 0x0308++0x03 line.long 0x0 "GICD_ICDABR2,Active Status Register 2" bitfld.long 0x00 31. " ASB95 ,Active Status Bit 95" "Not active,Active" bitfld.long 0x00 30. " ASB94 ,Active Status Bit 94" "Not active,Active" bitfld.long 0x00 29. " ASB93 ,Active Status Bit 93" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB92 ,Active Status Bit 92" "Not active,Active" bitfld.long 0x00 27. " ASB91 ,Active Status Bit 91" "Not active,Active" bitfld.long 0x00 26. " ASB90 ,Active Status Bit 90" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB89 ,Active Status Bit 89" "Not active,Active" bitfld.long 0x00 24. " ASB88 ,Active Status Bit 88" "Not active,Active" bitfld.long 0x00 23. " ASB87 ,Active Status Bit 87" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB86 ,Active Status Bit 86" "Not active,Active" bitfld.long 0x00 21. " ASB85 ,Active Status Bit 85" "Not active,Active" bitfld.long 0x00 20. " ASB84 ,Active Status Bit 84" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB83 ,Active Status Bit 83" "Not active,Active" bitfld.long 0x00 18. " ASB82 ,Active Status Bit 82" "Not active,Active" bitfld.long 0x00 17. " ASB81 ,Active Status Bit 81" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB80 ,Active Status Bit 80" "Not active,Active" bitfld.long 0x00 15. " ASB79 ,Active Status Bit 79" "Not active,Active" bitfld.long 0x00 14. " ASB78 ,Active Status Bit 78" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB77 ,Active Status Bit 77" "Not active,Active" bitfld.long 0x00 12. " ASB76 ,Active Status Bit 76" "Not active,Active" bitfld.long 0x00 11. " ASB75 ,Active Status Bit 75" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB74 ,Active Status Bit 74" "Not active,Active" bitfld.long 0x00 9. " ASB73 ,Active Status Bit 73" "Not active,Active" bitfld.long 0x00 8. " ASB72 ,Active Status Bit 72" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB71 ,Active Status Bit 71" "Not active,Active" bitfld.long 0x00 6. " ASB70 ,Active Status Bit 70" "Not active,Active" bitfld.long 0x00 5. " ASB69 ,Active Status Bit 69" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB68 ,Active Status Bit 68" "Not active,Active" bitfld.long 0x00 3. " ASB67 ,Active Status Bit 67" "Not active,Active" bitfld.long 0x00 2. " ASB66 ,Active Status Bit 66" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB65 ,Active Status Bit 65" "Not active,Active" bitfld.long 0x00 0. " ASB64 ,Active Status Bit 64" "Not active,Active" else hgroup.long 0x0308++0x03 hide.long 0x0 "GICD_ICDABR2,Active Status Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x03) rgroup.long 0x030C++0x03 line.long 0x0 "GICD_ICDABR3,Active Status Register 3" bitfld.long 0x00 31. " ASB127 ,Active Status Bit 127" "Not active,Active" bitfld.long 0x00 30. " ASB126 ,Active Status Bit 126" "Not active,Active" bitfld.long 0x00 29. " ASB125 ,Active Status Bit 125" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB124 ,Active Status Bit 124" "Not active,Active" bitfld.long 0x00 27. " ASB123 ,Active Status Bit 123" "Not active,Active" bitfld.long 0x00 26. " ASB122 ,Active Status Bit 122" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB121 ,Active Status Bit 121" "Not active,Active" bitfld.long 0x00 24. " ASB120 ,Active Status Bit 120" "Not active,Active" bitfld.long 0x00 23. " ASB119 ,Active Status Bit 119" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB118 ,Active Status Bit 118" "Not active,Active" bitfld.long 0x00 21. " ASB117 ,Active Status Bit 117" "Not active,Active" bitfld.long 0x00 20. " ASB116 ,Active Status Bit 116" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB115 ,Active Status Bit 115" "Not active,Active" bitfld.long 0x00 18. " ASB114 ,Active Status Bit 114" "Not active,Active" bitfld.long 0x00 17. " ASB113 ,Active Status Bit 113" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB112 ,Active Status Bit 112" "Not active,Active" bitfld.long 0x00 15. " ASB111 ,Active Status Bit 111" "Not active,Active" bitfld.long 0x00 14. " ASB110 ,Active Status Bit 110" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB109 ,Active Status Bit 109" "Not active,Active" bitfld.long 0x00 12. " ASB108 ,Active Status Bit 108" "Not active,Active" bitfld.long 0x00 11. " ASB107 ,Active Status Bit 107" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB106 ,Active Status Bit 106" "Not active,Active" bitfld.long 0x00 9. " ASB105 ,Active Status Bit 105" "Not active,Active" bitfld.long 0x00 8. " ASB104 ,Active Status Bit 104" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB103 ,Active Status Bit 103" "Not active,Active" bitfld.long 0x00 6. " ASB102 ,Active Status Bit 102" "Not active,Active" bitfld.long 0x00 5. " ASB101 ,Active Status Bit 101" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB100 ,Active Status Bit 100" "Not active,Active" bitfld.long 0x00 3. " ASB99 ,Active Status Bit 99" "Not active,Active" bitfld.long 0x00 2. " ASB98 ,Active Status Bit 98" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB97 ,Active Status Bit 97" "Not active,Active" bitfld.long 0x00 0. " ASB96 ,Active Status Bit 96" "Not active,Active" else hgroup.long 0x030C++0x03 hide.long 0x0 "GICD_ICDABR3,Active Status Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x04) rgroup.long 0x0310++0x03 line.long 0x0 "GICD_ICDABR4,Active Status Register 4" bitfld.long 0x00 31. " ASB159 ,Active Status Bit 159" "Not active,Active" bitfld.long 0x00 30. " ASB158 ,Active Status Bit 158" "Not active,Active" bitfld.long 0x00 29. " ASB157 ,Active Status Bit 157" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB156 ,Active Status Bit 156" "Not active,Active" bitfld.long 0x00 27. " ASB155 ,Active Status Bit 155" "Not active,Active" bitfld.long 0x00 26. " ASB154 ,Active Status Bit 154" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB153 ,Active Status Bit 153" "Not active,Active" bitfld.long 0x00 24. " ASB152 ,Active Status Bit 152" "Not active,Active" bitfld.long 0x00 23. " ASB151 ,Active Status Bit 151" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB150 ,Active Status Bit 150" "Not active,Active" bitfld.long 0x00 21. " ASB149 ,Active Status Bit 149" "Not active,Active" bitfld.long 0x00 20. " ASB148 ,Active Status Bit 148" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB147 ,Active Status Bit 147" "Not active,Active" bitfld.long 0x00 18. " ASB146 ,Active Status Bit 146" "Not active,Active" bitfld.long 0x00 17. " ASB145 ,Active Status Bit 145" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB144 ,Active Status Bit 144" "Not active,Active" bitfld.long 0x00 15. " ASB143 ,Active Status Bit 143" "Not active,Active" bitfld.long 0x00 14. " ASB142 ,Active Status Bit 142" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB141 ,Active Status Bit 141" "Not active,Active" bitfld.long 0x00 12. " ASB140 ,Active Status Bit 140" "Not active,Active" bitfld.long 0x00 11. " ASB139 ,Active Status Bit 139" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB138 ,Active Status Bit 138" "Not active,Active" bitfld.long 0x00 9. " ASB137 ,Active Status Bit 137" "Not active,Active" bitfld.long 0x00 8. " ASB136 ,Active Status Bit 136" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB135 ,Active Status Bit 135" "Not active,Active" bitfld.long 0x00 6. " ASB134 ,Active Status Bit 134" "Not active,Active" bitfld.long 0x00 5. " ASB133 ,Active Status Bit 133" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB132 ,Active Status Bit 132" "Not active,Active" bitfld.long 0x00 3. " ASB131 ,Active Status Bit 131" "Not active,Active" bitfld.long 0x00 2. " ASB130 ,Active Status Bit 130" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB129 ,Active Status Bit 129" "Not active,Active" bitfld.long 0x00 0. " ASB128 ,Active Status Bit 128" "Not active,Active" else hgroup.long 0x0310++0x03 hide.long 0x0 "GICD_ICDABR4,Active Status Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x05) rgroup.long 0x0314++0x03 line.long 0x0 "GICD_ICDABR5,Active Status Register 5" bitfld.long 0x00 31. " ASB191 ,Active Status Bit 191" "Not active,Active" bitfld.long 0x00 30. " ASB190 ,Active Status Bit 190" "Not active,Active" bitfld.long 0x00 29. " ASB189 ,Active Status Bit 189" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB188 ,Active Status Bit 188" "Not active,Active" bitfld.long 0x00 27. " ASB187 ,Active Status Bit 187" "Not active,Active" bitfld.long 0x00 26. " ASB186 ,Active Status Bit 186" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB185 ,Active Status Bit 185" "Not active,Active" bitfld.long 0x00 24. " ASB184 ,Active Status Bit 184" "Not active,Active" bitfld.long 0x00 23. " ASB183 ,Active Status Bit 183" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB182 ,Active Status Bit 182" "Not active,Active" bitfld.long 0x00 21. " ASB181 ,Active Status Bit 181" "Not active,Active" bitfld.long 0x00 20. " ASB180 ,Active Status Bit 180" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB179 ,Active Status Bit 179" "Not active,Active" bitfld.long 0x00 18. " ASB178 ,Active Status Bit 178" "Not active,Active" bitfld.long 0x00 17. " ASB177 ,Active Status Bit 177" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB176 ,Active Status Bit 176" "Not active,Active" bitfld.long 0x00 15. " ASB175 ,Active Status Bit 175" "Not active,Active" bitfld.long 0x00 14. " ASB174 ,Active Status Bit 174" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB173 ,Active Status Bit 173" "Not active,Active" bitfld.long 0x00 12. " ASB172 ,Active Status Bit 172" "Not active,Active" bitfld.long 0x00 11. " ASB171 ,Active Status Bit 171" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB170 ,Active Status Bit 170" "Not active,Active" bitfld.long 0x00 9. " ASB169 ,Active Status Bit 169" "Not active,Active" bitfld.long 0x00 8. " ASB168 ,Active Status Bit 168" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB167 ,Active Status Bit 167" "Not active,Active" bitfld.long 0x00 6. " ASB166 ,Active Status Bit 166" "Not active,Active" bitfld.long 0x00 5. " ASB165 ,Active Status Bit 165" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB164 ,Active Status Bit 164" "Not active,Active" bitfld.long 0x00 3. " ASB163 ,Active Status Bit 163" "Not active,Active" bitfld.long 0x00 2. " ASB162 ,Active Status Bit 162" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB161 ,Active Status Bit 161" "Not active,Active" bitfld.long 0x00 0. " ASB160 ,Active Status Bit 160" "Not active,Active" else hgroup.long 0x0314++0x03 hide.long 0x0 "GICD_ICDABR5,Active Status Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x06) rgroup.long 0x0318++0x03 line.long 0x0 "GICD_ICDABR6,Active Status Register 6" bitfld.long 0x00 31. " ASB223 ,Active Status Bit 223" "Not active,Active" bitfld.long 0x00 30. " ASB222 ,Active Status Bit 222" "Not active,Active" bitfld.long 0x00 29. " ASB221 ,Active Status Bit 221" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB220 ,Active Status Bit 220" "Not active,Active" bitfld.long 0x00 27. " ASB219 ,Active Status Bit 219" "Not active,Active" bitfld.long 0x00 26. " ASB218 ,Active Status Bit 218" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB217 ,Active Status Bit 217" "Not active,Active" bitfld.long 0x00 24. " ASB216 ,Active Status Bit 216" "Not active,Active" bitfld.long 0x00 23. " ASB215 ,Active Status Bit 215" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB214 ,Active Status Bit 214" "Not active,Active" bitfld.long 0x00 21. " ASB213 ,Active Status Bit 213" "Not active,Active" bitfld.long 0x00 20. " ASB212 ,Active Status Bit 212" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB211 ,Active Status Bit 211" "Not active,Active" bitfld.long 0x00 18. " ASB210 ,Active Status Bit 210" "Not active,Active" bitfld.long 0x00 17. " ASB209 ,Active Status Bit 209" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB208 ,Active Status Bit 208" "Not active,Active" bitfld.long 0x00 15. " ASB207 ,Active Status Bit 207" "Not active,Active" bitfld.long 0x00 14. " ASB206 ,Active Status Bit 206" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB205 ,Active Status Bit 205" "Not active,Active" bitfld.long 0x00 12. " ASB204 ,Active Status Bit 204" "Not active,Active" bitfld.long 0x00 11. " ASB203 ,Active Status Bit 203" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB202 ,Active Status Bit 202" "Not active,Active" bitfld.long 0x00 9. " ASB201 ,Active Status Bit 201" "Not active,Active" bitfld.long 0x00 8. " ASB200 ,Active Status Bit 200" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB199 ,Active Status Bit 199" "Not active,Active" bitfld.long 0x00 6. " ASB198 ,Active Status Bit 198" "Not active,Active" bitfld.long 0x00 5. " ASB197 ,Active Status Bit 197" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB196 ,Active Status Bit 196" "Not active,Active" bitfld.long 0x00 3. " ASB195 ,Active Status Bit 195" "Not active,Active" bitfld.long 0x00 2. " ASB194 ,Active Status Bit 194" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB193 ,Active Status Bit 193" "Not active,Active" bitfld.long 0x00 0. " ASB192 ,Active Status Bit 192" "Not active,Active" else hgroup.long 0x0318++0x03 hide.long 0x0 "GICD_ICDABR6,Active Status Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x07) rgroup.long 0x031C++0x03 line.long 0x0 "GICD_ICDABR7,Active Status Register 7" bitfld.long 0x00 31. " ASB255 ,Active Status Bit 255" "Not active,Active" bitfld.long 0x00 30. " ASB254 ,Active Status Bit 254" "Not active,Active" bitfld.long 0x00 29. " ASB253 ,Active Status Bit 253" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB252 ,Active Status Bit 252" "Not active,Active" bitfld.long 0x00 27. " ASB251 ,Active Status Bit 251" "Not active,Active" bitfld.long 0x00 26. " ASB250 ,Active Status Bit 250" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB249 ,Active Status Bit 249" "Not active,Active" bitfld.long 0x00 24. " ASB248 ,Active Status Bit 248" "Not active,Active" bitfld.long 0x00 23. " ASB247 ,Active Status Bit 247" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB246 ,Active Status Bit 246" "Not active,Active" bitfld.long 0x00 21. " ASB245 ,Active Status Bit 245" "Not active,Active" bitfld.long 0x00 20. " ASB244 ,Active Status Bit 244" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB243 ,Active Status Bit 243" "Not active,Active" bitfld.long 0x00 18. " ASB242 ,Active Status Bit 242" "Not active,Active" bitfld.long 0x00 17. " ASB241 ,Active Status Bit 241" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB240 ,Active Status Bit 240" "Not active,Active" bitfld.long 0x00 15. " ASB239 ,Active Status Bit 239" "Not active,Active" bitfld.long 0x00 14. " ASB238 ,Active Status Bit 238" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB237 ,Active Status Bit 237" "Not active,Active" bitfld.long 0x00 12. " ASB236 ,Active Status Bit 236" "Not active,Active" bitfld.long 0x00 11. " ASB235 ,Active Status Bit 235" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB234 ,Active Status Bit 234" "Not active,Active" bitfld.long 0x00 9. " ASB233 ,Active Status Bit 233" "Not active,Active" bitfld.long 0x00 8. " ASB232 ,Active Status Bit 232" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB231 ,Active Status Bit 231" "Not active,Active" bitfld.long 0x00 6. " ASB230 ,Active Status Bit 230" "Not active,Active" bitfld.long 0x00 5. " ASB229 ,Active Status Bit 229" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB228 ,Active Status Bit 228" "Not active,Active" bitfld.long 0x00 3. " ASB227 ,Active Status Bit 227" "Not active,Active" bitfld.long 0x00 2. " ASB226 ,Active Status Bit 226" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB225 ,Active Status Bit 225" "Not active,Active" bitfld.long 0x00 0. " ASB224 ,Active Status Bit 224" "Not active,Active" else hgroup.long 0x031C++0x03 hide.long 0x0 "GICD_ICDABR7,Active Status Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x08) rgroup.long 0x0320++0x03 line.long 0x0 "GICD_ICDABR8,Active Status Register 8" bitfld.long 0x00 31. " ASB287 ,Active Status Bit 287" "Not active,Active" bitfld.long 0x00 30. " ASB286 ,Active Status Bit 286" "Not active,Active" bitfld.long 0x00 29. " ASB285 ,Active Status Bit 285" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB284 ,Active Status Bit 284" "Not active,Active" bitfld.long 0x00 27. " ASB283 ,Active Status Bit 283" "Not active,Active" bitfld.long 0x00 26. " ASB282 ,Active Status Bit 282" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB281 ,Active Status Bit 281" "Not active,Active" bitfld.long 0x00 24. " ASB280 ,Active Status Bit 280" "Not active,Active" bitfld.long 0x00 23. " ASB279 ,Active Status Bit 279" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB278 ,Active Status Bit 278" "Not active,Active" bitfld.long 0x00 21. " ASB277 ,Active Status Bit 277" "Not active,Active" bitfld.long 0x00 20. " ASB276 ,Active Status Bit 276" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB275 ,Active Status Bit 275" "Not active,Active" bitfld.long 0x00 18. " ASB274 ,Active Status Bit 274" "Not active,Active" bitfld.long 0x00 17. " ASB273 ,Active Status Bit 273" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB272 ,Active Status Bit 272" "Not active,Active" bitfld.long 0x00 15. " ASB271 ,Active Status Bit 271" "Not active,Active" bitfld.long 0x00 14. " ASB270 ,Active Status Bit 270" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB269 ,Active Status Bit 269" "Not active,Active" bitfld.long 0x00 12. " ASB268 ,Active Status Bit 268" "Not active,Active" bitfld.long 0x00 11. " ASB267 ,Active Status Bit 267" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB266 ,Active Status Bit 266" "Not active,Active" bitfld.long 0x00 9. " ASB265 ,Active Status Bit 265" "Not active,Active" bitfld.long 0x00 8. " ASB264 ,Active Status Bit 264" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB263 ,Active Status Bit 263" "Not active,Active" bitfld.long 0x00 6. " ASB262 ,Active Status Bit 262" "Not active,Active" bitfld.long 0x00 5. " ASB261 ,Active Status Bit 261" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB260 ,Active Status Bit 260" "Not active,Active" bitfld.long 0x00 3. " ASB259 ,Active Status Bit 259" "Not active,Active" bitfld.long 0x00 2. " ASB258 ,Active Status Bit 258" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB257 ,Active Status Bit 257" "Not active,Active" bitfld.long 0x00 0. " ASB256 ,Active Status Bit 256" "Not active,Active" else hgroup.long 0x0320++0x03 hide.long 0x0 "GICD_ICDABR8,Active Status Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x09) rgroup.long 0x0324++0x03 line.long 0x0 "GICD_ICDABR9,Active Status Register 9" bitfld.long 0x00 31. " ASB319 ,Active Status Bit 319" "Not active,Active" bitfld.long 0x00 30. " ASB318 ,Active Status Bit 318" "Not active,Active" bitfld.long 0x00 29. " ASB317 ,Active Status Bit 317" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB316 ,Active Status Bit 316" "Not active,Active" bitfld.long 0x00 27. " ASB315 ,Active Status Bit 315" "Not active,Active" bitfld.long 0x00 26. " ASB314 ,Active Status Bit 314" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB313 ,Active Status Bit 313" "Not active,Active" bitfld.long 0x00 24. " ASB312 ,Active Status Bit 312" "Not active,Active" bitfld.long 0x00 23. " ASB311 ,Active Status Bit 311" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB310 ,Active Status Bit 310" "Not active,Active" bitfld.long 0x00 21. " ASB309 ,Active Status Bit 309" "Not active,Active" bitfld.long 0x00 20. " ASB308 ,Active Status Bit 308" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB307 ,Active Status Bit 307" "Not active,Active" bitfld.long 0x00 18. " ASB306 ,Active Status Bit 306" "Not active,Active" bitfld.long 0x00 17. " ASB305 ,Active Status Bit 305" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB304 ,Active Status Bit 304" "Not active,Active" bitfld.long 0x00 15. " ASB303 ,Active Status Bit 303" "Not active,Active" bitfld.long 0x00 14. " ASB302 ,Active Status Bit 302" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB301 ,Active Status Bit 301" "Not active,Active" bitfld.long 0x00 12. " ASB300 ,Active Status Bit 300" "Not active,Active" bitfld.long 0x00 11. " ASB299 ,Active Status Bit 299" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB298 ,Active Status Bit 298" "Not active,Active" bitfld.long 0x00 9. " ASB297 ,Active Status Bit 297" "Not active,Active" bitfld.long 0x00 8. " ASB296 ,Active Status Bit 296" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB295 ,Active Status Bit 295" "Not active,Active" bitfld.long 0x00 6. " ASB294 ,Active Status Bit 294" "Not active,Active" bitfld.long 0x00 5. " ASB293 ,Active Status Bit 293" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB292 ,Active Status Bit 292" "Not active,Active" bitfld.long 0x00 3. " ASB291 ,Active Status Bit 291" "Not active,Active" bitfld.long 0x00 2. " ASB290 ,Active Status Bit 290" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB289 ,Active Status Bit 289" "Not active,Active" bitfld.long 0x00 0. " ASB288 ,Active Status Bit 288" "Not active,Active" else hgroup.long 0x0324++0x03 hide.long 0x0 "GICD_ICDABR9,Active Status Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0A) rgroup.long 0x0328++0x03 line.long 0x0 "GICD_ICDABR10,Active Status Register 10" bitfld.long 0x00 31. " ASB351 ,Active Status Bit 351" "Not active,Active" bitfld.long 0x00 30. " ASB350 ,Active Status Bit 350" "Not active,Active" bitfld.long 0x00 29. " ASB349 ,Active Status Bit 349" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB348 ,Active Status Bit 348" "Not active,Active" bitfld.long 0x00 27. " ASB347 ,Active Status Bit 347" "Not active,Active" bitfld.long 0x00 26. " ASB346 ,Active Status Bit 346" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB345 ,Active Status Bit 345" "Not active,Active" bitfld.long 0x00 24. " ASB344 ,Active Status Bit 344" "Not active,Active" bitfld.long 0x00 23. " ASB343 ,Active Status Bit 343" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB342 ,Active Status Bit 342" "Not active,Active" bitfld.long 0x00 21. " ASB341 ,Active Status Bit 341" "Not active,Active" bitfld.long 0x00 20. " ASB340 ,Active Status Bit 340" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB339 ,Active Status Bit 339" "Not active,Active" bitfld.long 0x00 18. " ASB338 ,Active Status Bit 338" "Not active,Active" bitfld.long 0x00 17. " ASB337 ,Active Status Bit 337" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB336 ,Active Status Bit 336" "Not active,Active" bitfld.long 0x00 15. " ASB335 ,Active Status Bit 335" "Not active,Active" bitfld.long 0x00 14. " ASB334 ,Active Status Bit 334" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB333 ,Active Status Bit 333" "Not active,Active" bitfld.long 0x00 12. " ASB332 ,Active Status Bit 332" "Not active,Active" bitfld.long 0x00 11. " ASB331 ,Active Status Bit 331" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB330 ,Active Status Bit 330" "Not active,Active" bitfld.long 0x00 9. " ASB329 ,Active Status Bit 329" "Not active,Active" bitfld.long 0x00 8. " ASB328 ,Active Status Bit 328" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB327 ,Active Status Bit 327" "Not active,Active" bitfld.long 0x00 6. " ASB326 ,Active Status Bit 326" "Not active,Active" bitfld.long 0x00 5. " ASB325 ,Active Status Bit 325" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB324 ,Active Status Bit 324" "Not active,Active" bitfld.long 0x00 3. " ASB323 ,Active Status Bit 323" "Not active,Active" bitfld.long 0x00 2. " ASB322 ,Active Status Bit 322" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB321 ,Active Status Bit 321" "Not active,Active" bitfld.long 0x00 0. " ASB320 ,Active Status Bit 320" "Not active,Active" else hgroup.long 0x0328++0x03 hide.long 0x0 "GICD_ICDABR10,Active Status Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0B) rgroup.long 0x032C++0x03 line.long 0x0 "GICD_ICDABR11,Active Status Register 11" bitfld.long 0x00 31. " ASB383 ,Active Status Bit 383" "Not active,Active" bitfld.long 0x00 30. " ASB382 ,Active Status Bit 382" "Not active,Active" bitfld.long 0x00 29. " ASB381 ,Active Status Bit 381" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB380 ,Active Status Bit 380" "Not active,Active" bitfld.long 0x00 27. " ASB379 ,Active Status Bit 379" "Not active,Active" bitfld.long 0x00 26. " ASB378 ,Active Status Bit 378" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB377 ,Active Status Bit 377" "Not active,Active" bitfld.long 0x00 24. " ASB376 ,Active Status Bit 376" "Not active,Active" bitfld.long 0x00 23. " ASB375 ,Active Status Bit 375" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB374 ,Active Status Bit 374" "Not active,Active" bitfld.long 0x00 21. " ASB373 ,Active Status Bit 373" "Not active,Active" bitfld.long 0x00 20. " ASB372 ,Active Status Bit 372" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB371 ,Active Status Bit 371" "Not active,Active" bitfld.long 0x00 18. " ASB370 ,Active Status Bit 370" "Not active,Active" bitfld.long 0x00 17. " ASB369 ,Active Status Bit 369" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB368 ,Active Status Bit 368" "Not active,Active" bitfld.long 0x00 15. " ASB367 ,Active Status Bit 367" "Not active,Active" bitfld.long 0x00 14. " ASB366 ,Active Status Bit 366" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB365 ,Active Status Bit 365" "Not active,Active" bitfld.long 0x00 12. " ASB364 ,Active Status Bit 364" "Not active,Active" bitfld.long 0x00 11. " ASB363 ,Active Status Bit 363" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB362 ,Active Status Bit 362" "Not active,Active" bitfld.long 0x00 9. " ASB361 ,Active Status Bit 361" "Not active,Active" bitfld.long 0x00 8. " ASB360 ,Active Status Bit 360" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB359 ,Active Status Bit 359" "Not active,Active" bitfld.long 0x00 6. " ASB358 ,Active Status Bit 358" "Not active,Active" bitfld.long 0x00 5. " ASB357 ,Active Status Bit 357" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB356 ,Active Status Bit 356" "Not active,Active" bitfld.long 0x00 3. " ASB355 ,Active Status Bit 355" "Not active,Active" bitfld.long 0x00 2. " ASB354 ,Active Status Bit 354" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB353 ,Active Status Bit 353" "Not active,Active" bitfld.long 0x00 0. " ASB352 ,Active Status Bit 352" "Not active,Active" else hgroup.long 0x032C++0x03 hide.long 0x0 "GICD_ICDABR11,Active Status Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0C) rgroup.long 0x0330++0x03 line.long 0x0 "GICD_ICDABR12,Active Status Register 12" bitfld.long 0x00 31. " ASB415 ,Active Status Bit 415" "Not active,Active" bitfld.long 0x00 30. " ASB414 ,Active Status Bit 414" "Not active,Active" bitfld.long 0x00 29. " ASB413 ,Active Status Bit 413" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB412 ,Active Status Bit 412" "Not active,Active" bitfld.long 0x00 27. " ASB411 ,Active Status Bit 411" "Not active,Active" bitfld.long 0x00 26. " ASB410 ,Active Status Bit 410" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB409 ,Active Status Bit 409" "Not active,Active" bitfld.long 0x00 24. " ASB408 ,Active Status Bit 408" "Not active,Active" bitfld.long 0x00 23. " ASB407 ,Active Status Bit 407" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB406 ,Active Status Bit 406" "Not active,Active" bitfld.long 0x00 21. " ASB405 ,Active Status Bit 405" "Not active,Active" bitfld.long 0x00 20. " ASB404 ,Active Status Bit 404" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB403 ,Active Status Bit 403" "Not active,Active" bitfld.long 0x00 18. " ASB402 ,Active Status Bit 402" "Not active,Active" bitfld.long 0x00 17. " ASB401 ,Active Status Bit 401" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB400 ,Active Status Bit 400" "Not active,Active" bitfld.long 0x00 15. " ASB399 ,Active Status Bit 399" "Not active,Active" bitfld.long 0x00 14. " ASB398 ,Active Status Bit 398" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB397 ,Active Status Bit 397" "Not active,Active" bitfld.long 0x00 12. " ASB396 ,Active Status Bit 396" "Not active,Active" bitfld.long 0x00 11. " ASB395 ,Active Status Bit 395" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB394 ,Active Status Bit 394" "Not active,Active" bitfld.long 0x00 9. " ASB393 ,Active Status Bit 393" "Not active,Active" bitfld.long 0x00 8. " ASB392 ,Active Status Bit 392" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB391 ,Active Status Bit 391" "Not active,Active" bitfld.long 0x00 6. " ASB390 ,Active Status Bit 390" "Not active,Active" bitfld.long 0x00 5. " ASB389 ,Active Status Bit 389" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB388 ,Active Status Bit 388" "Not active,Active" bitfld.long 0x00 3. " ASB387 ,Active Status Bit 387" "Not active,Active" bitfld.long 0x00 2. " ASB386 ,Active Status Bit 386" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB385 ,Active Status Bit 385" "Not active,Active" bitfld.long 0x00 0. " ASB384 ,Active Status Bit 384" "Not active,Active" else hgroup.long 0x0330++0x03 hide.long 0x0 "GICD_ICDABR12,Active Status Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0D) rgroup.long 0x0334++0x03 line.long 0x0 "GICD_ICDABR13,Active Status Register 13" bitfld.long 0x00 31. " ASB447 ,Active Status Bit 447" "Not active,Active" bitfld.long 0x00 30. " ASB446 ,Active Status Bit 446" "Not active,Active" bitfld.long 0x00 29. " ASB445 ,Active Status Bit 445" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB444 ,Active Status Bit 444" "Not active,Active" bitfld.long 0x00 27. " ASB443 ,Active Status Bit 443" "Not active,Active" bitfld.long 0x00 26. " ASB442 ,Active Status Bit 442" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB441 ,Active Status Bit 441" "Not active,Active" bitfld.long 0x00 24. " ASB440 ,Active Status Bit 440" "Not active,Active" bitfld.long 0x00 23. " ASB439 ,Active Status Bit 439" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB438 ,Active Status Bit 438" "Not active,Active" bitfld.long 0x00 21. " ASB437 ,Active Status Bit 437" "Not active,Active" bitfld.long 0x00 20. " ASB436 ,Active Status Bit 436" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB435 ,Active Status Bit 435" "Not active,Active" bitfld.long 0x00 18. " ASB434 ,Active Status Bit 434" "Not active,Active" bitfld.long 0x00 17. " ASB433 ,Active Status Bit 433" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB432 ,Active Status Bit 432" "Not active,Active" bitfld.long 0x00 15. " ASB431 ,Active Status Bit 431" "Not active,Active" bitfld.long 0x00 14. " ASB430 ,Active Status Bit 430" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB429 ,Active Status Bit 429" "Not active,Active" bitfld.long 0x00 12. " ASB428 ,Active Status Bit 428" "Not active,Active" bitfld.long 0x00 11. " ASB427 ,Active Status Bit 427" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB426 ,Active Status Bit 426" "Not active,Active" bitfld.long 0x00 9. " ASB425 ,Active Status Bit 425" "Not active,Active" bitfld.long 0x00 8. " ASB424 ,Active Status Bit 424" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB423 ,Active Status Bit 423" "Not active,Active" bitfld.long 0x00 6. " ASB422 ,Active Status Bit 422" "Not active,Active" bitfld.long 0x00 5. " ASB421 ,Active Status Bit 421" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB420 ,Active Status Bit 420" "Not active,Active" bitfld.long 0x00 3. " ASB419 ,Active Status Bit 419" "Not active,Active" bitfld.long 0x00 2. " ASB418 ,Active Status Bit 418" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB417 ,Active Status Bit 417" "Not active,Active" bitfld.long 0x00 0. " ASB416 ,Active Status Bit 416" "Not active,Active" else hgroup.long 0x0334++0x03 hide.long 0x0 "GICD_ICDABR13,Active Status Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0E) rgroup.long 0x0338++0x03 line.long 0x0 "GICD_ICDABR14,Active Status Register 14" bitfld.long 0x00 31. " ASB479 ,Active Status Bit 479" "Not active,Active" bitfld.long 0x00 30. " ASB478 ,Active Status Bit 478" "Not active,Active" bitfld.long 0x00 29. " ASB477 ,Active Status Bit 477" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB476 ,Active Status Bit 476" "Not active,Active" bitfld.long 0x00 27. " ASB475 ,Active Status Bit 475" "Not active,Active" bitfld.long 0x00 26. " ASB474 ,Active Status Bit 474" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB473 ,Active Status Bit 473" "Not active,Active" bitfld.long 0x00 24. " ASB472 ,Active Status Bit 472" "Not active,Active" bitfld.long 0x00 23. " ASB471 ,Active Status Bit 471" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB470 ,Active Status Bit 470" "Not active,Active" bitfld.long 0x00 21. " ASB469 ,Active Status Bit 469" "Not active,Active" bitfld.long 0x00 20. " ASB468 ,Active Status Bit 468" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB467 ,Active Status Bit 467" "Not active,Active" bitfld.long 0x00 18. " ASB466 ,Active Status Bit 466" "Not active,Active" bitfld.long 0x00 17. " ASB465 ,Active Status Bit 465" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB464 ,Active Status Bit 464" "Not active,Active" bitfld.long 0x00 15. " ASB463 ,Active Status Bit 463" "Not active,Active" bitfld.long 0x00 14. " ASB462 ,Active Status Bit 462" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB461 ,Active Status Bit 461" "Not active,Active" bitfld.long 0x00 12. " ASB460 ,Active Status Bit 460" "Not active,Active" bitfld.long 0x00 11. " ASB459 ,Active Status Bit 459" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB458 ,Active Status Bit 458" "Not active,Active" bitfld.long 0x00 9. " ASB457 ,Active Status Bit 457" "Not active,Active" bitfld.long 0x00 8. " ASB456 ,Active Status Bit 456" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB455 ,Active Status Bit 455" "Not active,Active" bitfld.long 0x00 6. " ASB454 ,Active Status Bit 454" "Not active,Active" bitfld.long 0x00 5. " ASB453 ,Active Status Bit 453" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB452 ,Active Status Bit 452" "Not active,Active" bitfld.long 0x00 3. " ASB451 ,Active Status Bit 451" "Not active,Active" bitfld.long 0x00 2. " ASB450 ,Active Status Bit 450" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB449 ,Active Status Bit 449" "Not active,Active" bitfld.long 0x00 0. " ASB448 ,Active Status Bit 448" "Not active,Active" else hgroup.long 0x0338++0x03 hide.long 0x0 "GICD_ICDABR14,Active Status Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0F) rgroup.long 0x033C++0x03 line.long 0x0 "GICD_ICDABR15,Active Status Register 15" bitfld.long 0x00 31. " ASB511 ,Active Status Bit 511" "Not active,Active" bitfld.long 0x00 30. " ASB510 ,Active Status Bit 510" "Not active,Active" bitfld.long 0x00 29. " ASB509 ,Active Status Bit 509" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB508 ,Active Status Bit 508" "Not active,Active" bitfld.long 0x00 27. " ASB507 ,Active Status Bit 507" "Not active,Active" bitfld.long 0x00 26. " ASB506 ,Active Status Bit 506" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB505 ,Active Status Bit 505" "Not active,Active" bitfld.long 0x00 24. " ASB504 ,Active Status Bit 504" "Not active,Active" bitfld.long 0x00 23. " ASB503 ,Active Status Bit 503" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB502 ,Active Status Bit 502" "Not active,Active" bitfld.long 0x00 21. " ASB501 ,Active Status Bit 501" "Not active,Active" bitfld.long 0x00 20. " ASB500 ,Active Status Bit 500" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB499 ,Active Status Bit 499" "Not active,Active" bitfld.long 0x00 18. " ASB498 ,Active Status Bit 498" "Not active,Active" bitfld.long 0x00 17. " ASB497 ,Active Status Bit 497" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB496 ,Active Status Bit 496" "Not active,Active" bitfld.long 0x00 15. " ASB495 ,Active Status Bit 495" "Not active,Active" bitfld.long 0x00 14. " ASB494 ,Active Status Bit 494" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB493 ,Active Status Bit 493" "Not active,Active" bitfld.long 0x00 12. " ASB492 ,Active Status Bit 492" "Not active,Active" bitfld.long 0x00 11. " ASB491 ,Active Status Bit 491" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB490 ,Active Status Bit 490" "Not active,Active" bitfld.long 0x00 9. " ASB489 ,Active Status Bit 489" "Not active,Active" bitfld.long 0x00 8. " ASB488 ,Active Status Bit 488" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB487 ,Active Status Bit 487" "Not active,Active" bitfld.long 0x00 6. " ASB486 ,Active Status Bit 486" "Not active,Active" bitfld.long 0x00 5. " ASB485 ,Active Status Bit 485" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB484 ,Active Status Bit 484" "Not active,Active" bitfld.long 0x00 3. " ASB483 ,Active Status Bit 483" "Not active,Active" bitfld.long 0x00 2. " ASB482 ,Active Status Bit 482" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB481 ,Active Status Bit 481" "Not active,Active" bitfld.long 0x00 0. " ASB480 ,Active Status Bit 480" "Not active,Active" else hgroup.long 0x033C++0x03 hide.long 0x0 "GICD_ICDABR15,Active Status Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x10) rgroup.long 0x0340++0x03 line.long 0x0 "GICD_ICDABR16,Active Status Register 16" bitfld.long 0x00 31. " ASB543 ,Active Status Bit 543" "Not active,Active" bitfld.long 0x00 30. " ASB542 ,Active Status Bit 542" "Not active,Active" bitfld.long 0x00 29. " ASB541 ,Active Status Bit 541" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB540 ,Active Status Bit 540" "Not active,Active" bitfld.long 0x00 27. " ASB539 ,Active Status Bit 539" "Not active,Active" bitfld.long 0x00 26. " ASB538 ,Active Status Bit 538" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB537 ,Active Status Bit 537" "Not active,Active" bitfld.long 0x00 24. " ASB536 ,Active Status Bit 536" "Not active,Active" bitfld.long 0x00 23. " ASB535 ,Active Status Bit 535" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB534 ,Active Status Bit 534" "Not active,Active" bitfld.long 0x00 21. " ASB533 ,Active Status Bit 533" "Not active,Active" bitfld.long 0x00 20. " ASB532 ,Active Status Bit 532" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB531 ,Active Status Bit 531" "Not active,Active" bitfld.long 0x00 18. " ASB530 ,Active Status Bit 530" "Not active,Active" bitfld.long 0x00 17. " ASB529 ,Active Status Bit 529" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB528 ,Active Status Bit 528" "Not active,Active" bitfld.long 0x00 15. " ASB527 ,Active Status Bit 527" "Not active,Active" bitfld.long 0x00 14. " ASB526 ,Active Status Bit 526" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB525 ,Active Status Bit 525" "Not active,Active" bitfld.long 0x00 12. " ASB524 ,Active Status Bit 524" "Not active,Active" bitfld.long 0x00 11. " ASB523 ,Active Status Bit 523" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB522 ,Active Status Bit 522" "Not active,Active" bitfld.long 0x00 9. " ASB521 ,Active Status Bit 521" "Not active,Active" bitfld.long 0x00 8. " ASB520 ,Active Status Bit 520" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB519 ,Active Status Bit 519" "Not active,Active" bitfld.long 0x00 6. " ASB518 ,Active Status Bit 518" "Not active,Active" bitfld.long 0x00 5. " ASB517 ,Active Status Bit 517" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB516 ,Active Status Bit 516" "Not active,Active" bitfld.long 0x00 3. " ASB515 ,Active Status Bit 515" "Not active,Active" bitfld.long 0x00 2. " ASB514 ,Active Status Bit 514" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB513 ,Active Status Bit 513" "Not active,Active" bitfld.long 0x00 0. " ASB512 ,Active Status Bit 512" "Not active,Active" else hgroup.long 0x0340++0x03 hide.long 0x0 "GICD_ICDABR16,Active Status Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x11) rgroup.long 0x0344++0x03 line.long 0x0 "GICD_ICDABR17,Active Status Register 17" bitfld.long 0x00 31. " ASB575 ,Active Status Bit 575" "Not active,Active" bitfld.long 0x00 30. " ASB574 ,Active Status Bit 574" "Not active,Active" bitfld.long 0x00 29. " ASB573 ,Active Status Bit 573" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB572 ,Active Status Bit 572" "Not active,Active" bitfld.long 0x00 27. " ASB571 ,Active Status Bit 571" "Not active,Active" bitfld.long 0x00 26. " ASB570 ,Active Status Bit 570" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB569 ,Active Status Bit 569" "Not active,Active" bitfld.long 0x00 24. " ASB568 ,Active Status Bit 568" "Not active,Active" bitfld.long 0x00 23. " ASB567 ,Active Status Bit 567" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB566 ,Active Status Bit 566" "Not active,Active" bitfld.long 0x00 21. " ASB565 ,Active Status Bit 565" "Not active,Active" bitfld.long 0x00 20. " ASB564 ,Active Status Bit 564" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB563 ,Active Status Bit 563" "Not active,Active" bitfld.long 0x00 18. " ASB562 ,Active Status Bit 562" "Not active,Active" bitfld.long 0x00 17. " ASB561 ,Active Status Bit 561" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB560 ,Active Status Bit 560" "Not active,Active" bitfld.long 0x00 15. " ASB559 ,Active Status Bit 559" "Not active,Active" bitfld.long 0x00 14. " ASB558 ,Active Status Bit 558" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB557 ,Active Status Bit 557" "Not active,Active" bitfld.long 0x00 12. " ASB556 ,Active Status Bit 556" "Not active,Active" bitfld.long 0x00 11. " ASB555 ,Active Status Bit 555" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB554 ,Active Status Bit 554" "Not active,Active" bitfld.long 0x00 9. " ASB553 ,Active Status Bit 553" "Not active,Active" bitfld.long 0x00 8. " ASB552 ,Active Status Bit 552" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB551 ,Active Status Bit 551" "Not active,Active" bitfld.long 0x00 6. " ASB550 ,Active Status Bit 550" "Not active,Active" bitfld.long 0x00 5. " ASB549 ,Active Status Bit 549" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB548 ,Active Status Bit 548" "Not active,Active" bitfld.long 0x00 3. " ASB547 ,Active Status Bit 547" "Not active,Active" bitfld.long 0x00 2. " ASB546 ,Active Status Bit 546" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB545 ,Active Status Bit 545" "Not active,Active" bitfld.long 0x00 0. " ASB544 ,Active Status Bit 544" "Not active,Active" else hgroup.long 0x0344++0x03 hide.long 0x0 "GICD_ICDABR17,Active Status Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x12) rgroup.long 0x0348++0x03 line.long 0x0 "GICD_ICDABR18,Active Status Register 18" bitfld.long 0x00 31. " ASB607 ,Active Status Bit 607" "Not active,Active" bitfld.long 0x00 30. " ASB606 ,Active Status Bit 606" "Not active,Active" bitfld.long 0x00 29. " ASB605 ,Active Status Bit 605" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB604 ,Active Status Bit 604" "Not active,Active" bitfld.long 0x00 27. " ASB603 ,Active Status Bit 603" "Not active,Active" bitfld.long 0x00 26. " ASB602 ,Active Status Bit 602" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB601 ,Active Status Bit 601" "Not active,Active" bitfld.long 0x00 24. " ASB600 ,Active Status Bit 600" "Not active,Active" bitfld.long 0x00 23. " ASB599 ,Active Status Bit 599" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB598 ,Active Status Bit 598" "Not active,Active" bitfld.long 0x00 21. " ASB597 ,Active Status Bit 597" "Not active,Active" bitfld.long 0x00 20. " ASB596 ,Active Status Bit 596" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB595 ,Active Status Bit 595" "Not active,Active" bitfld.long 0x00 18. " ASB594 ,Active Status Bit 594" "Not active,Active" bitfld.long 0x00 17. " ASB593 ,Active Status Bit 593" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB592 ,Active Status Bit 592" "Not active,Active" bitfld.long 0x00 15. " ASB591 ,Active Status Bit 591" "Not active,Active" bitfld.long 0x00 14. " ASB590 ,Active Status Bit 590" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB589 ,Active Status Bit 589" "Not active,Active" bitfld.long 0x00 12. " ASB588 ,Active Status Bit 588" "Not active,Active" bitfld.long 0x00 11. " ASB587 ,Active Status Bit 587" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB586 ,Active Status Bit 586" "Not active,Active" bitfld.long 0x00 9. " ASB585 ,Active Status Bit 585" "Not active,Active" bitfld.long 0x00 8. " ASB584 ,Active Status Bit 584" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB583 ,Active Status Bit 583" "Not active,Active" bitfld.long 0x00 6. " ASB582 ,Active Status Bit 582" "Not active,Active" bitfld.long 0x00 5. " ASB581 ,Active Status Bit 581" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB580 ,Active Status Bit 580" "Not active,Active" bitfld.long 0x00 3. " ASB579 ,Active Status Bit 579" "Not active,Active" bitfld.long 0x00 2. " ASB578 ,Active Status Bit 578" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB577 ,Active Status Bit 577" "Not active,Active" bitfld.long 0x00 0. " ASB576 ,Active Status Bit 576" "Not active,Active" else hgroup.long 0x0348++0x03 hide.long 0x0 "GICD_ICDABR18,Active Status Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x13) rgroup.long 0x034C++0x03 line.long 0x0 "GICD_ICDABR19,Active Status Register 19" bitfld.long 0x00 31. " ASB639 ,Active Status Bit 639" "Not active,Active" bitfld.long 0x00 30. " ASB638 ,Active Status Bit 638" "Not active,Active" bitfld.long 0x00 29. " ASB637 ,Active Status Bit 637" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB636 ,Active Status Bit 636" "Not active,Active" bitfld.long 0x00 27. " ASB635 ,Active Status Bit 635" "Not active,Active" bitfld.long 0x00 26. " ASB634 ,Active Status Bit 634" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB633 ,Active Status Bit 633" "Not active,Active" bitfld.long 0x00 24. " ASB632 ,Active Status Bit 632" "Not active,Active" bitfld.long 0x00 23. " ASB631 ,Active Status Bit 631" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB630 ,Active Status Bit 630" "Not active,Active" bitfld.long 0x00 21. " ASB629 ,Active Status Bit 629" "Not active,Active" bitfld.long 0x00 20. " ASB628 ,Active Status Bit 628" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB627 ,Active Status Bit 627" "Not active,Active" bitfld.long 0x00 18. " ASB626 ,Active Status Bit 626" "Not active,Active" bitfld.long 0x00 17. " ASB625 ,Active Status Bit 625" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB624 ,Active Status Bit 624" "Not active,Active" bitfld.long 0x00 15. " ASB623 ,Active Status Bit 623" "Not active,Active" bitfld.long 0x00 14. " ASB622 ,Active Status Bit 622" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB621 ,Active Status Bit 621" "Not active,Active" bitfld.long 0x00 12. " ASB620 ,Active Status Bit 620" "Not active,Active" bitfld.long 0x00 11. " ASB619 ,Active Status Bit 619" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB618 ,Active Status Bit 618" "Not active,Active" bitfld.long 0x00 9. " ASB617 ,Active Status Bit 617" "Not active,Active" bitfld.long 0x00 8. " ASB616 ,Active Status Bit 616" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB615 ,Active Status Bit 615" "Not active,Active" bitfld.long 0x00 6. " ASB614 ,Active Status Bit 614" "Not active,Active" bitfld.long 0x00 5. " ASB613 ,Active Status Bit 613" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB612 ,Active Status Bit 612" "Not active,Active" bitfld.long 0x00 3. " ASB611 ,Active Status Bit 611" "Not active,Active" bitfld.long 0x00 2. " ASB610 ,Active Status Bit 610" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB609 ,Active Status Bit 609" "Not active,Active" bitfld.long 0x00 0. " ASB608 ,Active Status Bit 608" "Not active,Active" else hgroup.long 0x034C++0x03 hide.long 0x0 "GICD_ICDABR19,Active Status Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x14) rgroup.long 0x0350++0x03 line.long 0x0 "GICD_ICDABR20,Active Status Register 20" bitfld.long 0x00 31. " ASB671 ,Active Status Bit 671" "Not active,Active" bitfld.long 0x00 30. " ASB670 ,Active Status Bit 670" "Not active,Active" bitfld.long 0x00 29. " ASB669 ,Active Status Bit 669" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB668 ,Active Status Bit 668" "Not active,Active" bitfld.long 0x00 27. " ASB667 ,Active Status Bit 667" "Not active,Active" bitfld.long 0x00 26. " ASB666 ,Active Status Bit 666" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB665 ,Active Status Bit 665" "Not active,Active" bitfld.long 0x00 24. " ASB664 ,Active Status Bit 664" "Not active,Active" bitfld.long 0x00 23. " ASB663 ,Active Status Bit 663" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB662 ,Active Status Bit 662" "Not active,Active" bitfld.long 0x00 21. " ASB661 ,Active Status Bit 661" "Not active,Active" bitfld.long 0x00 20. " ASB660 ,Active Status Bit 660" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB659 ,Active Status Bit 659" "Not active,Active" bitfld.long 0x00 18. " ASB658 ,Active Status Bit 658" "Not active,Active" bitfld.long 0x00 17. " ASB657 ,Active Status Bit 657" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB656 ,Active Status Bit 656" "Not active,Active" bitfld.long 0x00 15. " ASB655 ,Active Status Bit 655" "Not active,Active" bitfld.long 0x00 14. " ASB654 ,Active Status Bit 654" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB653 ,Active Status Bit 653" "Not active,Active" bitfld.long 0x00 12. " ASB652 ,Active Status Bit 652" "Not active,Active" bitfld.long 0x00 11. " ASB651 ,Active Status Bit 651" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB650 ,Active Status Bit 650" "Not active,Active" bitfld.long 0x00 9. " ASB649 ,Active Status Bit 649" "Not active,Active" bitfld.long 0x00 8. " ASB648 ,Active Status Bit 648" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB647 ,Active Status Bit 647" "Not active,Active" bitfld.long 0x00 6. " ASB646 ,Active Status Bit 646" "Not active,Active" bitfld.long 0x00 5. " ASB645 ,Active Status Bit 645" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB644 ,Active Status Bit 644" "Not active,Active" bitfld.long 0x00 3. " ASB643 ,Active Status Bit 643" "Not active,Active" bitfld.long 0x00 2. " ASB642 ,Active Status Bit 642" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB641 ,Active Status Bit 641" "Not active,Active" bitfld.long 0x00 0. " ASB640 ,Active Status Bit 640" "Not active,Active" else hgroup.long 0x0350++0x03 hide.long 0x0 "GICD_ICDABR20,Active Status Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x15) rgroup.long 0x0354++0x03 line.long 0x0 "GICD_ICDABR21,Active Status Register 21" bitfld.long 0x00 31. " ASB703 ,Active Status Bit 703" "Not active,Active" bitfld.long 0x00 30. " ASB702 ,Active Status Bit 702" "Not active,Active" bitfld.long 0x00 29. " ASB701 ,Active Status Bit 701" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB700 ,Active Status Bit 700" "Not active,Active" bitfld.long 0x00 27. " ASB699 ,Active Status Bit 699" "Not active,Active" bitfld.long 0x00 26. " ASB698 ,Active Status Bit 698" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB697 ,Active Status Bit 697" "Not active,Active" bitfld.long 0x00 24. " ASB696 ,Active Status Bit 696" "Not active,Active" bitfld.long 0x00 23. " ASB695 ,Active Status Bit 695" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB694 ,Active Status Bit 694" "Not active,Active" bitfld.long 0x00 21. " ASB693 ,Active Status Bit 693" "Not active,Active" bitfld.long 0x00 20. " ASB692 ,Active Status Bit 692" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB691 ,Active Status Bit 691" "Not active,Active" bitfld.long 0x00 18. " ASB690 ,Active Status Bit 690" "Not active,Active" bitfld.long 0x00 17. " ASB689 ,Active Status Bit 689" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB688 ,Active Status Bit 688" "Not active,Active" bitfld.long 0x00 15. " ASB687 ,Active Status Bit 687" "Not active,Active" bitfld.long 0x00 14. " ASB686 ,Active Status Bit 686" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB685 ,Active Status Bit 685" "Not active,Active" bitfld.long 0x00 12. " ASB684 ,Active Status Bit 684" "Not active,Active" bitfld.long 0x00 11. " ASB683 ,Active Status Bit 683" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB682 ,Active Status Bit 682" "Not active,Active" bitfld.long 0x00 9. " ASB681 ,Active Status Bit 681" "Not active,Active" bitfld.long 0x00 8. " ASB680 ,Active Status Bit 680" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB679 ,Active Status Bit 679" "Not active,Active" bitfld.long 0x00 6. " ASB678 ,Active Status Bit 678" "Not active,Active" bitfld.long 0x00 5. " ASB677 ,Active Status Bit 677" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB676 ,Active Status Bit 676" "Not active,Active" bitfld.long 0x00 3. " ASB675 ,Active Status Bit 675" "Not active,Active" bitfld.long 0x00 2. " ASB674 ,Active Status Bit 674" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB673 ,Active Status Bit 673" "Not active,Active" bitfld.long 0x00 0. " ASB672 ,Active Status Bit 672" "Not active,Active" else hgroup.long 0x0354++0x03 hide.long 0x0 "GICD_ICDABR21,Active Status Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x16) rgroup.long 0x0358++0x03 line.long 0x0 "GICD_ICDABR22,Active Status Register 22" bitfld.long 0x00 31. " ASB735 ,Active Status Bit 735" "Not active,Active" bitfld.long 0x00 30. " ASB734 ,Active Status Bit 734" "Not active,Active" bitfld.long 0x00 29. " ASB733 ,Active Status Bit 733" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB732 ,Active Status Bit 732" "Not active,Active" bitfld.long 0x00 27. " ASB731 ,Active Status Bit 731" "Not active,Active" bitfld.long 0x00 26. " ASB730 ,Active Status Bit 730" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB729 ,Active Status Bit 729" "Not active,Active" bitfld.long 0x00 24. " ASB728 ,Active Status Bit 728" "Not active,Active" bitfld.long 0x00 23. " ASB727 ,Active Status Bit 727" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB726 ,Active Status Bit 726" "Not active,Active" bitfld.long 0x00 21. " ASB725 ,Active Status Bit 725" "Not active,Active" bitfld.long 0x00 20. " ASB724 ,Active Status Bit 724" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB723 ,Active Status Bit 723" "Not active,Active" bitfld.long 0x00 18. " ASB722 ,Active Status Bit 722" "Not active,Active" bitfld.long 0x00 17. " ASB721 ,Active Status Bit 721" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB720 ,Active Status Bit 720" "Not active,Active" bitfld.long 0x00 15. " ASB719 ,Active Status Bit 719" "Not active,Active" bitfld.long 0x00 14. " ASB718 ,Active Status Bit 718" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB717 ,Active Status Bit 717" "Not active,Active" bitfld.long 0x00 12. " ASB716 ,Active Status Bit 716" "Not active,Active" bitfld.long 0x00 11. " ASB715 ,Active Status Bit 715" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB714 ,Active Status Bit 714" "Not active,Active" bitfld.long 0x00 9. " ASB713 ,Active Status Bit 713" "Not active,Active" bitfld.long 0x00 8. " ASB712 ,Active Status Bit 712" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB711 ,Active Status Bit 711" "Not active,Active" bitfld.long 0x00 6. " ASB710 ,Active Status Bit 710" "Not active,Active" bitfld.long 0x00 5. " ASB709 ,Active Status Bit 709" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB708 ,Active Status Bit 708" "Not active,Active" bitfld.long 0x00 3. " ASB707 ,Active Status Bit 707" "Not active,Active" bitfld.long 0x00 2. " ASB706 ,Active Status Bit 706" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB705 ,Active Status Bit 705" "Not active,Active" bitfld.long 0x00 0. " ASB704 ,Active Status Bit 704" "Not active,Active" else hgroup.long 0x0358++0x03 hide.long 0x0 "GICD_ICDABR22,Active Status Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x17) rgroup.long 0x035C++0x03 line.long 0x0 "GICD_ICDABR23,Active Status Register 23" bitfld.long 0x00 31. " ASB767 ,Active Status Bit 767" "Not active,Active" bitfld.long 0x00 30. " ASB766 ,Active Status Bit 766" "Not active,Active" bitfld.long 0x00 29. " ASB765 ,Active Status Bit 765" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB764 ,Active Status Bit 764" "Not active,Active" bitfld.long 0x00 27. " ASB763 ,Active Status Bit 763" "Not active,Active" bitfld.long 0x00 26. " ASB762 ,Active Status Bit 762" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB761 ,Active Status Bit 761" "Not active,Active" bitfld.long 0x00 24. " ASB760 ,Active Status Bit 760" "Not active,Active" bitfld.long 0x00 23. " ASB759 ,Active Status Bit 759" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB758 ,Active Status Bit 758" "Not active,Active" bitfld.long 0x00 21. " ASB757 ,Active Status Bit 757" "Not active,Active" bitfld.long 0x00 20. " ASB756 ,Active Status Bit 756" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB755 ,Active Status Bit 755" "Not active,Active" bitfld.long 0x00 18. " ASB754 ,Active Status Bit 754" "Not active,Active" bitfld.long 0x00 17. " ASB753 ,Active Status Bit 753" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB752 ,Active Status Bit 752" "Not active,Active" bitfld.long 0x00 15. " ASB751 ,Active Status Bit 751" "Not active,Active" bitfld.long 0x00 14. " ASB750 ,Active Status Bit 750" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB749 ,Active Status Bit 749" "Not active,Active" bitfld.long 0x00 12. " ASB748 ,Active Status Bit 748" "Not active,Active" bitfld.long 0x00 11. " ASB747 ,Active Status Bit 747" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB746 ,Active Status Bit 746" "Not active,Active" bitfld.long 0x00 9. " ASB745 ,Active Status Bit 745" "Not active,Active" bitfld.long 0x00 8. " ASB744 ,Active Status Bit 744" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB743 ,Active Status Bit 743" "Not active,Active" bitfld.long 0x00 6. " ASB742 ,Active Status Bit 742" "Not active,Active" bitfld.long 0x00 5. " ASB741 ,Active Status Bit 741" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB740 ,Active Status Bit 740" "Not active,Active" bitfld.long 0x00 3. " ASB739 ,Active Status Bit 739" "Not active,Active" bitfld.long 0x00 2. " ASB738 ,Active Status Bit 738" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB737 ,Active Status Bit 737" "Not active,Active" bitfld.long 0x00 0. " ASB736 ,Active Status Bit 736" "Not active,Active" else hgroup.long 0x035C++0x03 hide.long 0x0 "GICD_ICDABR23,Active Status Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x18) rgroup.long 0x0360++0x03 line.long 0x0 "GICD_ICDABR24,Active Status Register 24" bitfld.long 0x00 31. " ASB799 ,Active Status Bit 799" "Not active,Active" bitfld.long 0x00 30. " ASB798 ,Active Status Bit 798" "Not active,Active" bitfld.long 0x00 29. " ASB797 ,Active Status Bit 797" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB796 ,Active Status Bit 796" "Not active,Active" bitfld.long 0x00 27. " ASB795 ,Active Status Bit 795" "Not active,Active" bitfld.long 0x00 26. " ASB794 ,Active Status Bit 794" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB793 ,Active Status Bit 793" "Not active,Active" bitfld.long 0x00 24. " ASB792 ,Active Status Bit 792" "Not active,Active" bitfld.long 0x00 23. " ASB791 ,Active Status Bit 791" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB790 ,Active Status Bit 790" "Not active,Active" bitfld.long 0x00 21. " ASB789 ,Active Status Bit 789" "Not active,Active" bitfld.long 0x00 20. " ASB788 ,Active Status Bit 788" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB787 ,Active Status Bit 787" "Not active,Active" bitfld.long 0x00 18. " ASB786 ,Active Status Bit 786" "Not active,Active" bitfld.long 0x00 17. " ASB785 ,Active Status Bit 785" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB784 ,Active Status Bit 784" "Not active,Active" bitfld.long 0x00 15. " ASB783 ,Active Status Bit 783" "Not active,Active" bitfld.long 0x00 14. " ASB782 ,Active Status Bit 782" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB781 ,Active Status Bit 781" "Not active,Active" bitfld.long 0x00 12. " ASB780 ,Active Status Bit 780" "Not active,Active" bitfld.long 0x00 11. " ASB779 ,Active Status Bit 779" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB778 ,Active Status Bit 778" "Not active,Active" bitfld.long 0x00 9. " ASB777 ,Active Status Bit 777" "Not active,Active" bitfld.long 0x00 8. " ASB776 ,Active Status Bit 776" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB775 ,Active Status Bit 775" "Not active,Active" bitfld.long 0x00 6. " ASB774 ,Active Status Bit 774" "Not active,Active" bitfld.long 0x00 5. " ASB773 ,Active Status Bit 773" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB772 ,Active Status Bit 772" "Not active,Active" bitfld.long 0x00 3. " ASB771 ,Active Status Bit 771" "Not active,Active" bitfld.long 0x00 2. " ASB770 ,Active Status Bit 770" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB769 ,Active Status Bit 769" "Not active,Active" bitfld.long 0x00 0. " ASB768 ,Active Status Bit 768" "Not active,Active" else hgroup.long 0x0360++0x03 hide.long 0x0 "GICD_ICDABR24,Active Status Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x19) rgroup.long 0x0364++0x03 line.long 0x0 "GICD_ICDABR25,Active Status Register 25" bitfld.long 0x00 31. " ASB831 ,Active Status Bit 831" "Not active,Active" bitfld.long 0x00 30. " ASB830 ,Active Status Bit 830" "Not active,Active" bitfld.long 0x00 29. " ASB829 ,Active Status Bit 829" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB828 ,Active Status Bit 828" "Not active,Active" bitfld.long 0x00 27. " ASB827 ,Active Status Bit 827" "Not active,Active" bitfld.long 0x00 26. " ASB826 ,Active Status Bit 826" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB825 ,Active Status Bit 825" "Not active,Active" bitfld.long 0x00 24. " ASB824 ,Active Status Bit 824" "Not active,Active" bitfld.long 0x00 23. " ASB823 ,Active Status Bit 823" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB822 ,Active Status Bit 822" "Not active,Active" bitfld.long 0x00 21. " ASB821 ,Active Status Bit 821" "Not active,Active" bitfld.long 0x00 20. " ASB820 ,Active Status Bit 820" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB819 ,Active Status Bit 819" "Not active,Active" bitfld.long 0x00 18. " ASB818 ,Active Status Bit 818" "Not active,Active" bitfld.long 0x00 17. " ASB817 ,Active Status Bit 817" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB816 ,Active Status Bit 816" "Not active,Active" bitfld.long 0x00 15. " ASB815 ,Active Status Bit 815" "Not active,Active" bitfld.long 0x00 14. " ASB814 ,Active Status Bit 814" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB813 ,Active Status Bit 813" "Not active,Active" bitfld.long 0x00 12. " ASB812 ,Active Status Bit 812" "Not active,Active" bitfld.long 0x00 11. " ASB811 ,Active Status Bit 811" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB810 ,Active Status Bit 810" "Not active,Active" bitfld.long 0x00 9. " ASB809 ,Active Status Bit 809" "Not active,Active" bitfld.long 0x00 8. " ASB808 ,Active Status Bit 808" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB807 ,Active Status Bit 807" "Not active,Active" bitfld.long 0x00 6. " ASB806 ,Active Status Bit 806" "Not active,Active" bitfld.long 0x00 5. " ASB805 ,Active Status Bit 805" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB804 ,Active Status Bit 804" "Not active,Active" bitfld.long 0x00 3. " ASB803 ,Active Status Bit 803" "Not active,Active" bitfld.long 0x00 2. " ASB802 ,Active Status Bit 802" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB801 ,Active Status Bit 801" "Not active,Active" bitfld.long 0x00 0. " ASB800 ,Active Status Bit 800" "Not active,Active" else hgroup.long 0x0364++0x03 hide.long 0x0 "GICD_ICDABR25,Active Status Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1A) rgroup.long 0x0368++0x03 line.long 0x0 "GICD_ICDABR26,Active Status Register 26" bitfld.long 0x00 31. " ASB863 ,Active Status Bit 863" "Not active,Active" bitfld.long 0x00 30. " ASB862 ,Active Status Bit 862" "Not active,Active" bitfld.long 0x00 29. " ASB861 ,Active Status Bit 861" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB860 ,Active Status Bit 860" "Not active,Active" bitfld.long 0x00 27. " ASB859 ,Active Status Bit 859" "Not active,Active" bitfld.long 0x00 26. " ASB858 ,Active Status Bit 858" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB857 ,Active Status Bit 857" "Not active,Active" bitfld.long 0x00 24. " ASB856 ,Active Status Bit 856" "Not active,Active" bitfld.long 0x00 23. " ASB855 ,Active Status Bit 855" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB854 ,Active Status Bit 854" "Not active,Active" bitfld.long 0x00 21. " ASB853 ,Active Status Bit 853" "Not active,Active" bitfld.long 0x00 20. " ASB852 ,Active Status Bit 852" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB851 ,Active Status Bit 851" "Not active,Active" bitfld.long 0x00 18. " ASB850 ,Active Status Bit 850" "Not active,Active" bitfld.long 0x00 17. " ASB849 ,Active Status Bit 849" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB848 ,Active Status Bit 848" "Not active,Active" bitfld.long 0x00 15. " ASB847 ,Active Status Bit 847" "Not active,Active" bitfld.long 0x00 14. " ASB846 ,Active Status Bit 846" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB845 ,Active Status Bit 845" "Not active,Active" bitfld.long 0x00 12. " ASB844 ,Active Status Bit 844" "Not active,Active" bitfld.long 0x00 11. " ASB843 ,Active Status Bit 843" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB842 ,Active Status Bit 842" "Not active,Active" bitfld.long 0x00 9. " ASB841 ,Active Status Bit 841" "Not active,Active" bitfld.long 0x00 8. " ASB840 ,Active Status Bit 840" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB839 ,Active Status Bit 839" "Not active,Active" bitfld.long 0x00 6. " ASB838 ,Active Status Bit 838" "Not active,Active" bitfld.long 0x00 5. " ASB837 ,Active Status Bit 837" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB836 ,Active Status Bit 836" "Not active,Active" bitfld.long 0x00 3. " ASB835 ,Active Status Bit 835" "Not active,Active" bitfld.long 0x00 2. " ASB834 ,Active Status Bit 834" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB833 ,Active Status Bit 833" "Not active,Active" bitfld.long 0x00 0. " ASB832 ,Active Status Bit 832" "Not active,Active" else hgroup.long 0x0368++0x03 hide.long 0x0 "GICD_ICDABR26,Active Status Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1B) rgroup.long 0x036C++0x03 line.long 0x0 "GICD_ICDABR27,Active Status Register 27" bitfld.long 0x00 31. " ASB895 ,Active Status Bit 895" "Not active,Active" bitfld.long 0x00 30. " ASB894 ,Active Status Bit 894" "Not active,Active" bitfld.long 0x00 29. " ASB893 ,Active Status Bit 893" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB892 ,Active Status Bit 892" "Not active,Active" bitfld.long 0x00 27. " ASB891 ,Active Status Bit 891" "Not active,Active" bitfld.long 0x00 26. " ASB890 ,Active Status Bit 890" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB889 ,Active Status Bit 889" "Not active,Active" bitfld.long 0x00 24. " ASB888 ,Active Status Bit 888" "Not active,Active" bitfld.long 0x00 23. " ASB887 ,Active Status Bit 887" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB886 ,Active Status Bit 886" "Not active,Active" bitfld.long 0x00 21. " ASB885 ,Active Status Bit 885" "Not active,Active" bitfld.long 0x00 20. " ASB884 ,Active Status Bit 884" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB883 ,Active Status Bit 883" "Not active,Active" bitfld.long 0x00 18. " ASB882 ,Active Status Bit 882" "Not active,Active" bitfld.long 0x00 17. " ASB881 ,Active Status Bit 881" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB880 ,Active Status Bit 880" "Not active,Active" bitfld.long 0x00 15. " ASB879 ,Active Status Bit 879" "Not active,Active" bitfld.long 0x00 14. " ASB878 ,Active Status Bit 878" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB877 ,Active Status Bit 877" "Not active,Active" bitfld.long 0x00 12. " ASB876 ,Active Status Bit 876" "Not active,Active" bitfld.long 0x00 11. " ASB875 ,Active Status Bit 875" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB874 ,Active Status Bit 874" "Not active,Active" bitfld.long 0x00 9. " ASB873 ,Active Status Bit 873" "Not active,Active" bitfld.long 0x00 8. " ASB872 ,Active Status Bit 872" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB871 ,Active Status Bit 871" "Not active,Active" bitfld.long 0x00 6. " ASB870 ,Active Status Bit 870" "Not active,Active" bitfld.long 0x00 5. " ASB869 ,Active Status Bit 869" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB868 ,Active Status Bit 868" "Not active,Active" bitfld.long 0x00 3. " ASB867 ,Active Status Bit 867" "Not active,Active" bitfld.long 0x00 2. " ASB866 ,Active Status Bit 866" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB865 ,Active Status Bit 865" "Not active,Active" bitfld.long 0x00 0. " ASB864 ,Active Status Bit 864" "Not active,Active" else hgroup.long 0x036C++0x03 hide.long 0x0 "GICD_ICDABR27,Active Status Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1C) rgroup.long 0x0370++0x03 line.long 0x0 "GICD_ICDABR28,Active Status Register 28" bitfld.long 0x00 31. " ASB927 ,Active Status Bit 927" "Not active,Active" bitfld.long 0x00 30. " ASB926 ,Active Status Bit 926" "Not active,Active" bitfld.long 0x00 29. " ASB925 ,Active Status Bit 925" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB924 ,Active Status Bit 924" "Not active,Active" bitfld.long 0x00 27. " ASB923 ,Active Status Bit 923" "Not active,Active" bitfld.long 0x00 26. " ASB922 ,Active Status Bit 922" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB921 ,Active Status Bit 921" "Not active,Active" bitfld.long 0x00 24. " ASB920 ,Active Status Bit 920" "Not active,Active" bitfld.long 0x00 23. " ASB919 ,Active Status Bit 919" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB918 ,Active Status Bit 918" "Not active,Active" bitfld.long 0x00 21. " ASB917 ,Active Status Bit 917" "Not active,Active" bitfld.long 0x00 20. " ASB916 ,Active Status Bit 916" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB915 ,Active Status Bit 915" "Not active,Active" bitfld.long 0x00 18. " ASB914 ,Active Status Bit 914" "Not active,Active" bitfld.long 0x00 17. " ASB913 ,Active Status Bit 913" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB912 ,Active Status Bit 912" "Not active,Active" bitfld.long 0x00 15. " ASB911 ,Active Status Bit 911" "Not active,Active" bitfld.long 0x00 14. " ASB910 ,Active Status Bit 910" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB909 ,Active Status Bit 909" "Not active,Active" bitfld.long 0x00 12. " ASB908 ,Active Status Bit 908" "Not active,Active" bitfld.long 0x00 11. " ASB907 ,Active Status Bit 907" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB906 ,Active Status Bit 906" "Not active,Active" bitfld.long 0x00 9. " ASB905 ,Active Status Bit 905" "Not active,Active" bitfld.long 0x00 8. " ASB904 ,Active Status Bit 904" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB903 ,Active Status Bit 903" "Not active,Active" bitfld.long 0x00 6. " ASB902 ,Active Status Bit 902" "Not active,Active" bitfld.long 0x00 5. " ASB901 ,Active Status Bit 901" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB900 ,Active Status Bit 900" "Not active,Active" bitfld.long 0x00 3. " ASB899 ,Active Status Bit 899" "Not active,Active" bitfld.long 0x00 2. " ASB898 ,Active Status Bit 898" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB897 ,Active Status Bit 897" "Not active,Active" bitfld.long 0x00 0. " ASB896 ,Active Status Bit 896" "Not active,Active" else hgroup.long 0x0370++0x03 hide.long 0x0 "GICD_ICDABR28,Active Status Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1D) rgroup.long 0x0374++0x03 line.long 0x0 "GICD_ICDABR29,Active Status Register 29" bitfld.long 0x00 31. " ASB959 ,Active Status Bit 959" "Not active,Active" bitfld.long 0x00 30. " ASB958 ,Active Status Bit 958" "Not active,Active" bitfld.long 0x00 29. " ASB957 ,Active Status Bit 957" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB956 ,Active Status Bit 956" "Not active,Active" bitfld.long 0x00 27. " ASB955 ,Active Status Bit 955" "Not active,Active" bitfld.long 0x00 26. " ASB954 ,Active Status Bit 954" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB953 ,Active Status Bit 953" "Not active,Active" bitfld.long 0x00 24. " ASB952 ,Active Status Bit 952" "Not active,Active" bitfld.long 0x00 23. " ASB951 ,Active Status Bit 951" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB950 ,Active Status Bit 950" "Not active,Active" bitfld.long 0x00 21. " ASB949 ,Active Status Bit 949" "Not active,Active" bitfld.long 0x00 20. " ASB948 ,Active Status Bit 948" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB947 ,Active Status Bit 947" "Not active,Active" bitfld.long 0x00 18. " ASB946 ,Active Status Bit 946" "Not active,Active" bitfld.long 0x00 17. " ASB945 ,Active Status Bit 945" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB944 ,Active Status Bit 944" "Not active,Active" bitfld.long 0x00 15. " ASB943 ,Active Status Bit 943" "Not active,Active" bitfld.long 0x00 14. " ASB942 ,Active Status Bit 942" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB941 ,Active Status Bit 941" "Not active,Active" bitfld.long 0x00 12. " ASB940 ,Active Status Bit 940" "Not active,Active" bitfld.long 0x00 11. " ASB939 ,Active Status Bit 939" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB938 ,Active Status Bit 938" "Not active,Active" bitfld.long 0x00 9. " ASB937 ,Active Status Bit 937" "Not active,Active" bitfld.long 0x00 8. " ASB936 ,Active Status Bit 936" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB935 ,Active Status Bit 935" "Not active,Active" bitfld.long 0x00 6. " ASB934 ,Active Status Bit 934" "Not active,Active" bitfld.long 0x00 5. " ASB933 ,Active Status Bit 933" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB932 ,Active Status Bit 932" "Not active,Active" bitfld.long 0x00 3. " ASB931 ,Active Status Bit 931" "Not active,Active" bitfld.long 0x00 2. " ASB930 ,Active Status Bit 930" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB929 ,Active Status Bit 929" "Not active,Active" bitfld.long 0x00 0. " ASB928 ,Active Status Bit 928" "Not active,Active" else hgroup.long 0x0374++0x03 hide.long 0x0 "GICD_ICDABR29,Active Status Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1E) rgroup.long 0x0378++0x03 line.long 0x0 "GICD_ICDABR30,Active Status Register 30" bitfld.long 0x00 31. " ASB991 ,Active Status Bit 991" "Not active,Active" bitfld.long 0x00 30. " ASB990 ,Active Status Bit 990" "Not active,Active" bitfld.long 0x00 29. " ASB989 ,Active Status Bit 989" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB988 ,Active Status Bit 988" "Not active,Active" bitfld.long 0x00 27. " ASB987 ,Active Status Bit 987" "Not active,Active" bitfld.long 0x00 26. " ASB986 ,Active Status Bit 986" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB985 ,Active Status Bit 985" "Not active,Active" bitfld.long 0x00 24. " ASB984 ,Active Status Bit 984" "Not active,Active" bitfld.long 0x00 23. " ASB983 ,Active Status Bit 983" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB982 ,Active Status Bit 982" "Not active,Active" bitfld.long 0x00 21. " ASB981 ,Active Status Bit 981" "Not active,Active" bitfld.long 0x00 20. " ASB980 ,Active Status Bit 980" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB979 ,Active Status Bit 979" "Not active,Active" bitfld.long 0x00 18. " ASB978 ,Active Status Bit 978" "Not active,Active" bitfld.long 0x00 17. " ASB977 ,Active Status Bit 977" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB976 ,Active Status Bit 976" "Not active,Active" bitfld.long 0x00 15. " ASB975 ,Active Status Bit 975" "Not active,Active" bitfld.long 0x00 14. " ASB974 ,Active Status Bit 974" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB973 ,Active Status Bit 973" "Not active,Active" bitfld.long 0x00 12. " ASB972 ,Active Status Bit 972" "Not active,Active" bitfld.long 0x00 11. " ASB971 ,Active Status Bit 971" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB970 ,Active Status Bit 970" "Not active,Active" bitfld.long 0x00 9. " ASB969 ,Active Status Bit 969" "Not active,Active" bitfld.long 0x00 8. " ASB968 ,Active Status Bit 968" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB967 ,Active Status Bit 967" "Not active,Active" bitfld.long 0x00 6. " ASB966 ,Active Status Bit 966" "Not active,Active" bitfld.long 0x00 5. " ASB965 ,Active Status Bit 965" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB964 ,Active Status Bit 964" "Not active,Active" bitfld.long 0x00 3. " ASB963 ,Active Status Bit 963" "Not active,Active" bitfld.long 0x00 2. " ASB962 ,Active Status Bit 962" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB961 ,Active Status Bit 961" "Not active,Active" bitfld.long 0x00 0. " ASB960 ,Active Status Bit 960" "Not active,Active" else hgroup.long 0x0378++0x03 hide.long 0x0 "GICD_ICDABR30,Active Status Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)==0x1F) rgroup.long 0x037C++0x03 line.long 0x0 "GICD_ICDABR31,Active Status Register 31" bitfld.long 0x00 27. " ASB1019 ,Active Status Bit 1019" "Not active,Active" bitfld.long 0x00 26. " ASB1018 ,Active Status Bit 1018" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB1017 ,Active Status Bit 1017" "Not active,Active" bitfld.long 0x00 24. " ASB1016 ,Active Status Bit 1016" "Not active,Active" bitfld.long 0x00 23. " ASB1015 ,Active Status Bit 1015" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB1014 ,Active Status Bit 1014" "Not active,Active" bitfld.long 0x00 21. " ASB1013 ,Active Status Bit 1013" "Not active,Active" bitfld.long 0x00 20. " ASB1012 ,Active Status Bit 1012" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB1011 ,Active Status Bit 1011" "Not active,Active" bitfld.long 0x00 18. " ASB1010 ,Active Status Bit 1010" "Not active,Active" bitfld.long 0x00 17. " ASB1009 ,Active Status Bit 1009" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB1008 ,Active Status Bit 1008" "Not active,Active" bitfld.long 0x00 15. " ASB1007 ,Active Status Bit 1007" "Not active,Active" bitfld.long 0x00 14. " ASB1006 ,Active Status Bit 1006" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB1005 ,Active Status Bit 1005" "Not active,Active" bitfld.long 0x00 12. " ASB1004 ,Active Status Bit 1004" "Not active,Active" bitfld.long 0x00 11. " ASB1003 ,Active Status Bit 1003" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB1002 ,Active Status Bit 1002" "Not active,Active" bitfld.long 0x00 9. " ASB1001 ,Active Status Bit 1001" "Not active,Active" bitfld.long 0x00 8. " ASB1000 ,Active Status Bit 1000" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB999 ,Active Status Bit 999" "Not active,Active" bitfld.long 0x00 6. " ASB998 ,Active Status Bit 998" "Not active,Active" bitfld.long 0x00 5. " ASB997 ,Active Status Bit 997" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB996 ,Active Status Bit 996" "Not active,Active" bitfld.long 0x00 3. " ASB995 ,Active Status Bit 995" "Not active,Active" bitfld.long 0x00 2. " ASB994 ,Active Status Bit 994" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB993 ,Active Status Bit 993" "Not active,Active" bitfld.long 0x00 0. " ASB992 ,Active Status Bit 992" "Not active,Active" else hgroup.long 0x037C++0x03 hide.long 0x0 "GICD_ICDABR31,Active Status Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 20. tree "Priority Registers" group.long 0x400++0x03 line.long 0x00 "GICD_IPRIORITYR0,Interrupt Priority Register 0" hexmask.long.byte 0x00 24.--31. 1. " INTID3 ,Interrupt ID3 Priority/Priority Byte Offset 3 " hexmask.long.byte 0x00 16.--23. 1. " INTID2 ,Interrupt ID2 Priority/Priority Byte Offset 2 " hexmask.long.byte 0x00 8.--15. 1. " INTID1 ,Interrupt ID1 Priority/Priority Byte Offset 1 " hexmask.long.byte 0x00 0.--7. 1. " INTID0 ,Interrupt ID0 Priority/Priority Byte Offset 0 " group.long 0x404++0x03 line.long 0x00 "GICD_IPRIORITYR1,Interrupt Priority Register 1" hexmask.long.byte 0x00 24.--31. 1. " INTID7 ,Interrupt ID7 Priority/Priority Byte Offset 7 " hexmask.long.byte 0x00 16.--23. 1. " INTID6 ,Interrupt ID6 Priority/Priority Byte Offset 6 " hexmask.long.byte 0x00 8.--15. 1. " INTID5 ,Interrupt ID5 Priority/Priority Byte Offset 5 " hexmask.long.byte 0x00 0.--7. 1. " INTID4 ,Interrupt ID4 Priority/Priority Byte Offset 4 " group.long 0x408++0x03 line.long 0x00 "GICD_IPRIORITYR2,Interrupt Priority Register 2" hexmask.long.byte 0x00 24.--31. 1. " INTID11 ,Interrupt ID11 Priority/Priority Byte Offset 11 " hexmask.long.byte 0x00 16.--23. 1. " INTID10 ,Interrupt ID10 Priority/Priority Byte Offset 10 " hexmask.long.byte 0x00 8.--15. 1. " INTID9 ,Interrupt ID9 Priority/Priority Byte Offset 9 " hexmask.long.byte 0x00 0.--7. 1. " INTID8 ,Interrupt ID8 Priority/Priority Byte Offset 8 " group.long 0x40C++0x03 line.long 0x00 "GICD_IPRIORITYR3,Interrupt Priority Register 3" hexmask.long.byte 0x00 24.--31. 1. " INTID15 ,Interrupt ID15 Priority/Priority Byte Offset 15 " hexmask.long.byte 0x00 16.--23. 1. " INTID14 ,Interrupt ID14 Priority/Priority Byte Offset 14 " hexmask.long.byte 0x00 8.--15. 1. " INTID13 ,Interrupt ID13 Priority/Priority Byte Offset 13 " hexmask.long.byte 0x00 0.--7. 1. " INTID12 ,Interrupt ID12 Priority/Priority Byte Offset 12 " group.long 0x410++0x03 line.long 0x00 "GICD_IPRIORITYR4,Interrupt Priority Register 4" hexmask.long.byte 0x00 24.--31. 1. " INTID19 ,Interrupt ID19 Priority/Priority Byte Offset 19 " hexmask.long.byte 0x00 16.--23. 1. " INTID18 ,Interrupt ID18 Priority/Priority Byte Offset 18 " hexmask.long.byte 0x00 8.--15. 1. " INTID17 ,Interrupt ID17 Priority/Priority Byte Offset 17 " hexmask.long.byte 0x00 0.--7. 1. " INTID16 ,Interrupt ID16 Priority/Priority Byte Offset 16 " group.long 0x414++0x03 line.long 0x00 "GICD_IPRIORITYR5,Interrupt Priority Register 5" hexmask.long.byte 0x00 24.--31. 1. " INTID23 ,Interrupt ID23 Priority/Priority Byte Offset 23 " hexmask.long.byte 0x00 16.--23. 1. " INTID22 ,Interrupt ID22 Priority/Priority Byte Offset 22 " hexmask.long.byte 0x00 8.--15. 1. " INTID21 ,Interrupt ID21 Priority/Priority Byte Offset 21 " hexmask.long.byte 0x00 0.--7. 1. " INTID20 ,Interrupt ID20 Priority/Priority Byte Offset 20 " group.long 0x418++0x03 line.long 0x00 "GICD_IPRIORITYR6,Interrupt Priority Register 6" hexmask.long.byte 0x00 24.--31. 1. " INTID27 ,Interrupt ID27 Priority/Priority Byte Offset 27 " hexmask.long.byte 0x00 16.--23. 1. " INTID26 ,Interrupt ID26 Priority/Priority Byte Offset 26 " hexmask.long.byte 0x00 8.--15. 1. " INTID25 ,Interrupt ID25 Priority/Priority Byte Offset 25 " hexmask.long.byte 0x00 0.--7. 1. " INTID24 ,Interrupt ID24 Priority/Priority Byte Offset 24 " group.long 0x41C++0x03 line.long 0x00 "GICD_IPRIORITYR7,Interrupt Priority Register 7" hexmask.long.byte 0x00 24.--31. 1. " INTID31 ,Interrupt ID31 Priority/Priority Byte Offset 31 " hexmask.long.byte 0x00 16.--23. 1. " INTID30 ,Interrupt ID30 Priority/Priority Byte Offset 30 " hexmask.long.byte 0x00 8.--15. 1. " INTID29 ,Interrupt ID29 Priority/Priority Byte Offset 29 " hexmask.long.byte 0x00 0.--7. 1. " INTID28 ,Interrupt ID28 Priority/Priority Byte Offset 28 " if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x01) group.long 0x420++0x03 line.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8" hexmask.long.byte 0x00 24.--31. 1. " INTID35 ,Interrupt ID35 Priority/Priority Byte Offset 35 " hexmask.long.byte 0x00 16.--23. 1. " INTID34 ,Interrupt ID34 Priority/Priority Byte Offset 34 " hexmask.long.byte 0x00 8.--15. 1. " INTID33 ,Interrupt ID33 Priority/Priority Byte Offset 33 " hexmask.long.byte 0x00 0.--7. 1. " INTID32 ,Interrupt ID32 Priority/Priority Byte Offset 32 " group.long 0x424++0x03 line.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9" hexmask.long.byte 0x00 24.--31. 1. " INTID39 ,Interrupt ID39 Priority/Priority Byte Offset 39 " hexmask.long.byte 0x00 16.--23. 1. " INTID38 ,Interrupt ID38 Priority/Priority Byte Offset 38 " hexmask.long.byte 0x00 8.--15. 1. " INTID37 ,Interrupt ID37 Priority/Priority Byte Offset 37 " hexmask.long.byte 0x00 0.--7. 1. " INTID36 ,Interrupt ID36 Priority/Priority Byte Offset 36 " group.long 0x428++0x03 line.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10" hexmask.long.byte 0x00 24.--31. 1. " INTID43 ,Interrupt ID43 Priority/Priority Byte Offset 43 " hexmask.long.byte 0x00 16.--23. 1. " INTID42 ,Interrupt ID42 Priority/Priority Byte Offset 42 " hexmask.long.byte 0x00 8.--15. 1. " INTID41 ,Interrupt ID41 Priority/Priority Byte Offset 41 " hexmask.long.byte 0x00 0.--7. 1. " INTID40 ,Interrupt ID40 Priority/Priority Byte Offset 40 " group.long 0x42C++0x03 line.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11" hexmask.long.byte 0x00 24.--31. 1. " INTID47 ,Interrupt ID47 Priority/Priority Byte Offset 47 " hexmask.long.byte 0x00 16.--23. 1. " INTID46 ,Interrupt ID46 Priority/Priority Byte Offset 46 " hexmask.long.byte 0x00 8.--15. 1. " INTID45 ,Interrupt ID45 Priority/Priority Byte Offset 45 " hexmask.long.byte 0x00 0.--7. 1. " INTID44 ,Interrupt ID44 Priority/Priority Byte Offset 44 " group.long 0x430++0x03 line.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12" hexmask.long.byte 0x00 24.--31. 1. " INTID51 ,Interrupt ID51 Priority/Priority Byte Offset 51 " hexmask.long.byte 0x00 16.--23. 1. " INTID50 ,Interrupt ID50 Priority/Priority Byte Offset 50 " hexmask.long.byte 0x00 8.--15. 1. " INTID49 ,Interrupt ID49 Priority/Priority Byte Offset 49 " hexmask.long.byte 0x00 0.--7. 1. " INTID48 ,Interrupt ID48 Priority/Priority Byte Offset 48 " group.long 0x434++0x03 line.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13" hexmask.long.byte 0x00 24.--31. 1. " INTID55 ,Interrupt ID55 Priority/Priority Byte Offset 55 " hexmask.long.byte 0x00 16.--23. 1. " INTID54 ,Interrupt ID54 Priority/Priority Byte Offset 54 " hexmask.long.byte 0x00 8.--15. 1. " INTID53 ,Interrupt ID53 Priority/Priority Byte Offset 53 " hexmask.long.byte 0x00 0.--7. 1. " INTID52 ,Interrupt ID52 Priority/Priority Byte Offset 52 " group.long 0x438++0x03 line.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14" hexmask.long.byte 0x00 24.--31. 1. " INTID59 ,Interrupt ID59 Priority/Priority Byte Offset 59 " hexmask.long.byte 0x00 16.--23. 1. " INTID58 ,Interrupt ID58 Priority/Priority Byte Offset 58 " hexmask.long.byte 0x00 8.--15. 1. " INTID57 ,Interrupt ID57 Priority/Priority Byte Offset 57 " hexmask.long.byte 0x00 0.--7. 1. " INTID56 ,Interrupt ID56 Priority/Priority Byte Offset 56 " group.long 0x43C++0x03 line.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15" hexmask.long.byte 0x00 24.--31. 1. " INTID63 ,Interrupt ID63 Priority/Priority Byte Offset 63 " hexmask.long.byte 0x00 16.--23. 1. " INTID62 ,Interrupt ID62 Priority/Priority Byte Offset 62 " hexmask.long.byte 0x00 8.--15. 1. " INTID61 ,Interrupt ID61 Priority/Priority Byte Offset 61 " hexmask.long.byte 0x00 0.--7. 1. " INTID60 ,Interrupt ID60 Priority/Priority Byte Offset 60 " else hgroup.long 0x420++0x03 hide.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8" hgroup.long 0x424++0x03 hide.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9" hgroup.long 0x428++0x03 hide.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10" hgroup.long 0x42C++0x03 hide.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11" hgroup.long 0x430++0x03 hide.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12" hgroup.long 0x434++0x03 hide.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13" hgroup.long 0x438++0x03 hide.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14" hgroup.long 0x43C++0x03 hide.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x02) group.long 0x440++0x03 line.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16" hexmask.long.byte 0x00 24.--31. 1. " INTID67 ,Interrupt ID67 Priority/Priority Byte Offset 67 " hexmask.long.byte 0x00 16.--23. 1. " INTID66 ,Interrupt ID66 Priority/Priority Byte Offset 66 " hexmask.long.byte 0x00 8.--15. 1. " INTID65 ,Interrupt ID65 Priority/Priority Byte Offset 65 " hexmask.long.byte 0x00 0.--7. 1. " INTID64 ,Interrupt ID64 Priority/Priority Byte Offset 64 " group.long 0x444++0x03 line.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17" hexmask.long.byte 0x00 24.--31. 1. " INTID71 ,Interrupt ID71 Priority/Priority Byte Offset 71 " hexmask.long.byte 0x00 16.--23. 1. " INTID70 ,Interrupt ID70 Priority/Priority Byte Offset 70 " hexmask.long.byte 0x00 8.--15. 1. " INTID69 ,Interrupt ID69 Priority/Priority Byte Offset 69 " hexmask.long.byte 0x00 0.--7. 1. " INTID68 ,Interrupt ID68 Priority/Priority Byte Offset 68 " group.long 0x448++0x03 line.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18" hexmask.long.byte 0x00 24.--31. 1. " INTID75 ,Interrupt ID75 Priority/Priority Byte Offset 75 " hexmask.long.byte 0x00 16.--23. 1. " INTID74 ,Interrupt ID74 Priority/Priority Byte Offset 74 " hexmask.long.byte 0x00 8.--15. 1. " INTID73 ,Interrupt ID73 Priority/Priority Byte Offset 73 " hexmask.long.byte 0x00 0.--7. 1. " INTID72 ,Interrupt ID72 Priority/Priority Byte Offset 72 " group.long 0x44C++0x03 line.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19" hexmask.long.byte 0x00 24.--31. 1. " INTID79 ,Interrupt ID79 Priority/Priority Byte Offset 79 " hexmask.long.byte 0x00 16.--23. 1. " INTID78 ,Interrupt ID78 Priority/Priority Byte Offset 78 " hexmask.long.byte 0x00 8.--15. 1. " INTID77 ,Interrupt ID77 Priority/Priority Byte Offset 77 " hexmask.long.byte 0x00 0.--7. 1. " INTID76 ,Interrupt ID76 Priority/Priority Byte Offset 76 " group.long 0x450++0x03 line.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20" hexmask.long.byte 0x00 24.--31. 1. " INTID83 ,Interrupt ID83 Priority/Priority Byte Offset 83 " hexmask.long.byte 0x00 16.--23. 1. " INTID82 ,Interrupt ID82 Priority/Priority Byte Offset 82 " hexmask.long.byte 0x00 8.--15. 1. " INTID81 ,Interrupt ID81 Priority/Priority Byte Offset 81 " hexmask.long.byte 0x00 0.--7. 1. " INTID80 ,Interrupt ID80 Priority/Priority Byte Offset 80 " group.long 0x454++0x03 line.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21" hexmask.long.byte 0x00 24.--31. 1. " INTID87 ,Interrupt ID87 Priority/Priority Byte Offset 87 " hexmask.long.byte 0x00 16.--23. 1. " INTID86 ,Interrupt ID86 Priority/Priority Byte Offset 86 " hexmask.long.byte 0x00 8.--15. 1. " INTID85 ,Interrupt ID85 Priority/Priority Byte Offset 85 " hexmask.long.byte 0x00 0.--7. 1. " INTID84 ,Interrupt ID84 Priority/Priority Byte Offset 84 " group.long 0x458++0x03 line.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22" hexmask.long.byte 0x00 24.--31. 1. " INTID91 ,Interrupt ID91 Priority/Priority Byte Offset 91 " hexmask.long.byte 0x00 16.--23. 1. " INTID90 ,Interrupt ID90 Priority/Priority Byte Offset 90 " hexmask.long.byte 0x00 8.--15. 1. " INTID89 ,Interrupt ID89 Priority/Priority Byte Offset 89 " hexmask.long.byte 0x00 0.--7. 1. " INTID88 ,Interrupt ID88 Priority/Priority Byte Offset 88 " group.long 0x45C++0x03 line.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23" hexmask.long.byte 0x00 24.--31. 1. " INTID95 ,Interrupt ID95 Priority/Priority Byte Offset 95 " hexmask.long.byte 0x00 16.--23. 1. " INTID94 ,Interrupt ID94 Priority/Priority Byte Offset 94 " hexmask.long.byte 0x00 8.--15. 1. " INTID93 ,Interrupt ID93 Priority/Priority Byte Offset 93 " hexmask.long.byte 0x00 0.--7. 1. " INTID92 ,Interrupt ID92 Priority/Priority Byte Offset 92 " else hgroup.long 0x440++0x03 hide.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16" hgroup.long 0x444++0x03 hide.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17" hgroup.long 0x448++0x03 hide.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18" hgroup.long 0x44C++0x03 hide.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19" hgroup.long 0x450++0x03 hide.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20" hgroup.long 0x454++0x03 hide.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21" hgroup.long 0x458++0x03 hide.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22" hgroup.long 0x45C++0x03 hide.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x03) group.long 0x460++0x03 line.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24" hexmask.long.byte 0x00 24.--31. 1. " INTID99 ,Interrupt ID99 Priority/Priority Byte Offset 99 " hexmask.long.byte 0x00 16.--23. 1. " INTID98 ,Interrupt ID98 Priority/Priority Byte Offset 98 " hexmask.long.byte 0x00 8.--15. 1. " INTID97 ,Interrupt ID97 Priority/Priority Byte Offset 97 " hexmask.long.byte 0x00 0.--7. 1. " INTID96 ,Interrupt ID96 Priority/Priority Byte Offset 96 " group.long 0x464++0x03 line.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25" hexmask.long.byte 0x00 24.--31. 1. " INTID103 ,Interrupt ID103 Priority/Priority Byte Offset 103 " hexmask.long.byte 0x00 16.--23. 1. " INTID102 ,Interrupt ID102 Priority/Priority Byte Offset 102 " hexmask.long.byte 0x00 8.--15. 1. " INTID101 ,Interrupt ID101 Priority/Priority Byte Offset 101 " hexmask.long.byte 0x00 0.--7. 1. " INTID100 ,Interrupt ID100 Priority/Priority Byte Offset 100 " group.long 0x468++0x03 line.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26" hexmask.long.byte 0x00 24.--31. 1. " INTID107 ,Interrupt ID107 Priority/Priority Byte Offset 107 " hexmask.long.byte 0x00 16.--23. 1. " INTID106 ,Interrupt ID106 Priority/Priority Byte Offset 106 " hexmask.long.byte 0x00 8.--15. 1. " INTID105 ,Interrupt ID105 Priority/Priority Byte Offset 105 " hexmask.long.byte 0x00 0.--7. 1. " INTID104 ,Interrupt ID104 Priority/Priority Byte Offset 104 " group.long 0x46C++0x03 line.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27" hexmask.long.byte 0x00 24.--31. 1. " INTID111 ,Interrupt ID111 Priority/Priority Byte Offset 111 " hexmask.long.byte 0x00 16.--23. 1. " INTID110 ,Interrupt ID110 Priority/Priority Byte Offset 110 " hexmask.long.byte 0x00 8.--15. 1. " INTID109 ,Interrupt ID109 Priority/Priority Byte Offset 109 " hexmask.long.byte 0x00 0.--7. 1. " INTID108 ,Interrupt ID108 Priority/Priority Byte Offset 108 " group.long 0x470++0x03 line.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28" hexmask.long.byte 0x00 24.--31. 1. " INTID115 ,Interrupt ID115 Priority/Priority Byte Offset 115 " hexmask.long.byte 0x00 16.--23. 1. " INTID114 ,Interrupt ID114 Priority/Priority Byte Offset 114 " hexmask.long.byte 0x00 8.--15. 1. " INTID113 ,Interrupt ID113 Priority/Priority Byte Offset 113 " hexmask.long.byte 0x00 0.--7. 1. " INTID112 ,Interrupt ID112 Priority/Priority Byte Offset 112 " group.long 0x474++0x03 line.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29" hexmask.long.byte 0x00 24.--31. 1. " INTID119 ,Interrupt ID119 Priority/Priority Byte Offset 119 " hexmask.long.byte 0x00 16.--23. 1. " INTID118 ,Interrupt ID118 Priority/Priority Byte Offset 118 " hexmask.long.byte 0x00 8.--15. 1. " INTID117 ,Interrupt ID117 Priority/Priority Byte Offset 117 " hexmask.long.byte 0x00 0.--7. 1. " INTID116 ,Interrupt ID116 Priority/Priority Byte Offset 116 " group.long 0x478++0x03 line.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30" hexmask.long.byte 0x00 24.--31. 1. " INTID123 ,Interrupt ID123 Priority/Priority Byte Offset 123 " hexmask.long.byte 0x00 16.--23. 1. " INTID122 ,Interrupt ID122 Priority/Priority Byte Offset 122 " hexmask.long.byte 0x00 8.--15. 1. " INTID121 ,Interrupt ID121 Priority/Priority Byte Offset 121 " hexmask.long.byte 0x00 0.--7. 1. " INTID120 ,Interrupt ID120 Priority/Priority Byte Offset 120 " group.long 0x47C++0x03 line.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31" hexmask.long.byte 0x00 24.--31. 1. " INTID127 ,Interrupt ID127 Priority/Priority Byte Offset 127 " hexmask.long.byte 0x00 16.--23. 1. " INTID126 ,Interrupt ID126 Priority/Priority Byte Offset 126 " hexmask.long.byte 0x00 8.--15. 1. " INTID125 ,Interrupt ID125 Priority/Priority Byte Offset 125 " hexmask.long.byte 0x00 0.--7. 1. " INTID124 ,Interrupt ID124 Priority/Priority Byte Offset 124 " else hgroup.long 0x460++0x03 hide.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24" hgroup.long 0x464++0x03 hide.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25" hgroup.long 0x468++0x03 hide.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26" hgroup.long 0x46C++0x03 hide.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27" hgroup.long 0x470++0x03 hide.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28" hgroup.long 0x474++0x03 hide.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29" hgroup.long 0x478++0x03 hide.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30" hgroup.long 0x47C++0x03 hide.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x04) group.long 0x480++0x03 line.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32" hexmask.long.byte 0x00 24.--31. 1. " INTID131 ,Interrupt ID131 Priority/Priority Byte Offset 131 " hexmask.long.byte 0x00 16.--23. 1. " INTID130 ,Interrupt ID130 Priority/Priority Byte Offset 130 " hexmask.long.byte 0x00 8.--15. 1. " INTID129 ,Interrupt ID129 Priority/Priority Byte Offset 129 " hexmask.long.byte 0x00 0.--7. 1. " INTID128 ,Interrupt ID128 Priority/Priority Byte Offset 128 " group.long 0x484++0x03 line.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33" hexmask.long.byte 0x00 24.--31. 1. " INTID135 ,Interrupt ID135 Priority/Priority Byte Offset 135 " hexmask.long.byte 0x00 16.--23. 1. " INTID134 ,Interrupt ID134 Priority/Priority Byte Offset 134 " hexmask.long.byte 0x00 8.--15. 1. " INTID133 ,Interrupt ID133 Priority/Priority Byte Offset 133 " hexmask.long.byte 0x00 0.--7. 1. " INTID132 ,Interrupt ID132 Priority/Priority Byte Offset 132 " group.long 0x488++0x03 line.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34" hexmask.long.byte 0x00 24.--31. 1. " INTID139 ,Interrupt ID139 Priority/Priority Byte Offset 139 " hexmask.long.byte 0x00 16.--23. 1. " INTID138 ,Interrupt ID138 Priority/Priority Byte Offset 138 " hexmask.long.byte 0x00 8.--15. 1. " INTID137 ,Interrupt ID137 Priority/Priority Byte Offset 137 " hexmask.long.byte 0x00 0.--7. 1. " INTID136 ,Interrupt ID136 Priority/Priority Byte Offset 136 " group.long 0x48C++0x03 line.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35" hexmask.long.byte 0x00 24.--31. 1. " INTID143 ,Interrupt ID143 Priority/Priority Byte Offset 143 " hexmask.long.byte 0x00 16.--23. 1. " INTID142 ,Interrupt ID142 Priority/Priority Byte Offset 142 " hexmask.long.byte 0x00 8.--15. 1. " INTID141 ,Interrupt ID141 Priority/Priority Byte Offset 141 " hexmask.long.byte 0x00 0.--7. 1. " INTID140 ,Interrupt ID140 Priority/Priority Byte Offset 140 " group.long 0x490++0x03 line.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36" hexmask.long.byte 0x00 24.--31. 1. " INTID147 ,Interrupt ID147 Priority/Priority Byte Offset 147 " hexmask.long.byte 0x00 16.--23. 1. " INTID146 ,Interrupt ID146 Priority/Priority Byte Offset 146 " hexmask.long.byte 0x00 8.--15. 1. " INTID145 ,Interrupt ID145 Priority/Priority Byte Offset 145 " hexmask.long.byte 0x00 0.--7. 1. " INTID144 ,Interrupt ID144 Priority/Priority Byte Offset 144 " group.long 0x494++0x03 line.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37" hexmask.long.byte 0x00 24.--31. 1. " INTID151 ,Interrupt ID151 Priority/Priority Byte Offset 151 " hexmask.long.byte 0x00 16.--23. 1. " INTID150 ,Interrupt ID150 Priority/Priority Byte Offset 150 " hexmask.long.byte 0x00 8.--15. 1. " INTID149 ,Interrupt ID149 Priority/Priority Byte Offset 149 " hexmask.long.byte 0x00 0.--7. 1. " INTID148 ,Interrupt ID148 Priority/Priority Byte Offset 148 " group.long 0x498++0x03 line.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38" hexmask.long.byte 0x00 24.--31. 1. " INTID155 ,Interrupt ID155 Priority/Priority Byte Offset 155 " hexmask.long.byte 0x00 16.--23. 1. " INTID154 ,Interrupt ID154 Priority/Priority Byte Offset 154 " hexmask.long.byte 0x00 8.--15. 1. " INTID153 ,Interrupt ID153 Priority/Priority Byte Offset 153 " hexmask.long.byte 0x00 0.--7. 1. " INTID152 ,Interrupt ID152 Priority/Priority Byte Offset 152 " group.long 0x49C++0x03 line.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39" hexmask.long.byte 0x00 24.--31. 1. " INTID159 ,Interrupt ID159 Priority/Priority Byte Offset 159 " hexmask.long.byte 0x00 16.--23. 1. " INTID158 ,Interrupt ID158 Priority/Priority Byte Offset 158 " hexmask.long.byte 0x00 8.--15. 1. " INTID157 ,Interrupt ID157 Priority/Priority Byte Offset 157 " hexmask.long.byte 0x00 0.--7. 1. " INTID156 ,Interrupt ID156 Priority/Priority Byte Offset 156 " else hgroup.long 0x480++0x03 hide.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32" hgroup.long 0x484++0x03 hide.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33" hgroup.long 0x488++0x03 hide.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34" hgroup.long 0x48C++0x03 hide.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35" hgroup.long 0x490++0x03 hide.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36" hgroup.long 0x494++0x03 hide.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37" hgroup.long 0x498++0x03 hide.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38" hgroup.long 0x49C++0x03 hide.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x05) group.long 0x4A0++0x03 line.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40" hexmask.long.byte 0x00 24.--31. 1. " INTID163 ,Interrupt ID163 Priority/Priority Byte Offset 163 " hexmask.long.byte 0x00 16.--23. 1. " INTID162 ,Interrupt ID162 Priority/Priority Byte Offset 162 " hexmask.long.byte 0x00 8.--15. 1. " INTID161 ,Interrupt ID161 Priority/Priority Byte Offset 161 " hexmask.long.byte 0x00 0.--7. 1. " INTID160 ,Interrupt ID160 Priority/Priority Byte Offset 160 " group.long 0x4A4++0x03 line.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41" hexmask.long.byte 0x00 24.--31. 1. " INTID167 ,Interrupt ID167 Priority/Priority Byte Offset 167 " hexmask.long.byte 0x00 16.--23. 1. " INTID166 ,Interrupt ID166 Priority/Priority Byte Offset 166 " hexmask.long.byte 0x00 8.--15. 1. " INTID165 ,Interrupt ID165 Priority/Priority Byte Offset 165 " hexmask.long.byte 0x00 0.--7. 1. " INTID164 ,Interrupt ID164 Priority/Priority Byte Offset 164 " group.long 0x4A8++0x03 line.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42" hexmask.long.byte 0x00 24.--31. 1. " INTID171 ,Interrupt ID171 Priority/Priority Byte Offset 171 " hexmask.long.byte 0x00 16.--23. 1. " INTID170 ,Interrupt ID170 Priority/Priority Byte Offset 170 " hexmask.long.byte 0x00 8.--15. 1. " INTID169 ,Interrupt ID169 Priority/Priority Byte Offset 169 " hexmask.long.byte 0x00 0.--7. 1. " INTID168 ,Interrupt ID168 Priority/Priority Byte Offset 168 " group.long 0x4AC++0x03 line.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43" hexmask.long.byte 0x00 24.--31. 1. " INTID175 ,Interrupt ID175 Priority/Priority Byte Offset 175 " hexmask.long.byte 0x00 16.--23. 1. " INTID174 ,Interrupt ID174 Priority/Priority Byte Offset 174 " hexmask.long.byte 0x00 8.--15. 1. " INTID173 ,Interrupt ID173 Priority/Priority Byte Offset 173 " hexmask.long.byte 0x00 0.--7. 1. " INTID172 ,Interrupt ID172 Priority/Priority Byte Offset 172 " group.long 0x4B0++0x03 line.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44" hexmask.long.byte 0x00 24.--31. 1. " INTID179 ,Interrupt ID179 Priority/Priority Byte Offset 179 " hexmask.long.byte 0x00 16.--23. 1. " INTID178 ,Interrupt ID178 Priority/Priority Byte Offset 178 " hexmask.long.byte 0x00 8.--15. 1. " INTID177 ,Interrupt ID177 Priority/Priority Byte Offset 177 " hexmask.long.byte 0x00 0.--7. 1. " INTID176 ,Interrupt ID176 Priority/Priority Byte Offset 176 " group.long 0x4B4++0x03 line.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45" hexmask.long.byte 0x00 24.--31. 1. " INTID183 ,Interrupt ID183 Priority/Priority Byte Offset 183 " hexmask.long.byte 0x00 16.--23. 1. " INTID182 ,Interrupt ID182 Priority/Priority Byte Offset 182 " hexmask.long.byte 0x00 8.--15. 1. " INTID181 ,Interrupt ID181 Priority/Priority Byte Offset 181 " hexmask.long.byte 0x00 0.--7. 1. " INTID180 ,Interrupt ID180 Priority/Priority Byte Offset 180 " group.long 0x4B8++0x03 line.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46" hexmask.long.byte 0x00 24.--31. 1. " INTID187 ,Interrupt ID187 Priority/Priority Byte Offset 187 " hexmask.long.byte 0x00 16.--23. 1. " INTID186 ,Interrupt ID186 Priority/Priority Byte Offset 186 " hexmask.long.byte 0x00 8.--15. 1. " INTID185 ,Interrupt ID185 Priority/Priority Byte Offset 185 " hexmask.long.byte 0x00 0.--7. 1. " INTID184 ,Interrupt ID184 Priority/Priority Byte Offset 184 " group.long 0x4BC++0x03 line.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47" hexmask.long.byte 0x00 24.--31. 1. " INTID191 ,Interrupt ID191 Priority/Priority Byte Offset 191 " hexmask.long.byte 0x00 16.--23. 1. " INTID190 ,Interrupt ID190 Priority/Priority Byte Offset 190 " hexmask.long.byte 0x00 8.--15. 1. " INTID189 ,Interrupt ID189 Priority/Priority Byte Offset 189 " hexmask.long.byte 0x00 0.--7. 1. " INTID188 ,Interrupt ID188 Priority/Priority Byte Offset 188 " else hgroup.long 0x4A0++0x03 hide.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40" hgroup.long 0x4A4++0x03 hide.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41" hgroup.long 0x4A8++0x03 hide.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42" hgroup.long 0x4AC++0x03 hide.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43" hgroup.long 0x4B0++0x03 hide.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44" hgroup.long 0x4B4++0x03 hide.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45" hgroup.long 0x4B8++0x03 hide.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46" hgroup.long 0x4BC++0x03 hide.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x06) group.long 0x4C0++0x03 line.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48" hexmask.long.byte 0x00 24.--31. 1. " INTID195 ,Interrupt ID195 Priority/Priority Byte Offset 195 " hexmask.long.byte 0x00 16.--23. 1. " INTID194 ,Interrupt ID194 Priority/Priority Byte Offset 194 " hexmask.long.byte 0x00 8.--15. 1. " INTID193 ,Interrupt ID193 Priority/Priority Byte Offset 193 " hexmask.long.byte 0x00 0.--7. 1. " INTID192 ,Interrupt ID192 Priority/Priority Byte Offset 192 " group.long 0x4C4++0x03 line.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49" hexmask.long.byte 0x00 24.--31. 1. " INTID199 ,Interrupt ID199 Priority/Priority Byte Offset 199 " hexmask.long.byte 0x00 16.--23. 1. " INTID198 ,Interrupt ID198 Priority/Priority Byte Offset 198 " hexmask.long.byte 0x00 8.--15. 1. " INTID197 ,Interrupt ID197 Priority/Priority Byte Offset 197 " hexmask.long.byte 0x00 0.--7. 1. " INTID196 ,Interrupt ID196 Priority/Priority Byte Offset 196 " group.long 0x4C8++0x03 line.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50" hexmask.long.byte 0x00 24.--31. 1. " INTID203 ,Interrupt ID203 Priority/Priority Byte Offset 203 " hexmask.long.byte 0x00 16.--23. 1. " INTID202 ,Interrupt ID202 Priority/Priority Byte Offset 202 " hexmask.long.byte 0x00 8.--15. 1. " INTID201 ,Interrupt ID201 Priority/Priority Byte Offset 201 " hexmask.long.byte 0x00 0.--7. 1. " INTID200 ,Interrupt ID200 Priority/Priority Byte Offset 200 " group.long 0x4CC++0x03 line.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51" hexmask.long.byte 0x00 24.--31. 1. " INTID207 ,Interrupt ID207 Priority/Priority Byte Offset 207 " hexmask.long.byte 0x00 16.--23. 1. " INTID206 ,Interrupt ID206 Priority/Priority Byte Offset 206 " hexmask.long.byte 0x00 8.--15. 1. " INTID205 ,Interrupt ID205 Priority/Priority Byte Offset 205 " hexmask.long.byte 0x00 0.--7. 1. " INTID204 ,Interrupt ID204 Priority/Priority Byte Offset 204 " group.long 0x4D0++0x03 line.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52" hexmask.long.byte 0x00 24.--31. 1. " INTID211 ,Interrupt ID211 Priority/Priority Byte Offset 211 " hexmask.long.byte 0x00 16.--23. 1. " INTID210 ,Interrupt ID210 Priority/Priority Byte Offset 210 " hexmask.long.byte 0x00 8.--15. 1. " INTID209 ,Interrupt ID209 Priority/Priority Byte Offset 209 " hexmask.long.byte 0x00 0.--7. 1. " INTID208 ,Interrupt ID208 Priority/Priority Byte Offset 208 " group.long 0x4D4++0x03 line.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53" hexmask.long.byte 0x00 24.--31. 1. " INTID215 ,Interrupt ID215 Priority/Priority Byte Offset 215 " hexmask.long.byte 0x00 16.--23. 1. " INTID214 ,Interrupt ID214 Priority/Priority Byte Offset 214 " hexmask.long.byte 0x00 8.--15. 1. " INTID213 ,Interrupt ID213 Priority/Priority Byte Offset 213 " hexmask.long.byte 0x00 0.--7. 1. " INTID212 ,Interrupt ID212 Priority/Priority Byte Offset 212 " group.long 0x4D8++0x03 line.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54" hexmask.long.byte 0x00 24.--31. 1. " INTID219 ,Interrupt ID219 Priority/Priority Byte Offset 219 " hexmask.long.byte 0x00 16.--23. 1. " INTID218 ,Interrupt ID218 Priority/Priority Byte Offset 218 " hexmask.long.byte 0x00 8.--15. 1. " INTID217 ,Interrupt ID217 Priority/Priority Byte Offset 217 " hexmask.long.byte 0x00 0.--7. 1. " INTID216 ,Interrupt ID216 Priority/Priority Byte Offset 216 " group.long 0x4DC++0x03 line.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55" hexmask.long.byte 0x00 24.--31. 1. " INTID223 ,Interrupt ID223 Priority/Priority Byte Offset 223 " hexmask.long.byte 0x00 16.--23. 1. " INTID222 ,Interrupt ID222 Priority/Priority Byte Offset 222 " hexmask.long.byte 0x00 8.--15. 1. " INTID221 ,Interrupt ID221 Priority/Priority Byte Offset 221 " hexmask.long.byte 0x00 0.--7. 1. " INTID220 ,Interrupt ID220 Priority/Priority Byte Offset 220 " else hgroup.long 0x4C0++0x03 hide.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48" hgroup.long 0x4C4++0x03 hide.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49" hgroup.long 0x4C8++0x03 hide.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50" hgroup.long 0x4CC++0x03 hide.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51" hgroup.long 0x4D0++0x03 hide.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52" hgroup.long 0x4D4++0x03 hide.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53" hgroup.long 0x4D8++0x03 hide.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54" hgroup.long 0x4DC++0x03 hide.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x07) group.long 0x4E0++0x03 line.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56" hexmask.long.byte 0x00 24.--31. 1. " INTID227 ,Interrupt ID227 Priority/Priority Byte Offset 227 " hexmask.long.byte 0x00 16.--23. 1. " INTID226 ,Interrupt ID226 Priority/Priority Byte Offset 226 " hexmask.long.byte 0x00 8.--15. 1. " INTID225 ,Interrupt ID225 Priority/Priority Byte Offset 225 " hexmask.long.byte 0x00 0.--7. 1. " INTID224 ,Interrupt ID224 Priority/Priority Byte Offset 224 " group.long 0x4E4++0x03 line.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57" hexmask.long.byte 0x00 24.--31. 1. " INTID231 ,Interrupt ID231 Priority/Priority Byte Offset 231 " hexmask.long.byte 0x00 16.--23. 1. " INTID230 ,Interrupt ID230 Priority/Priority Byte Offset 230 " hexmask.long.byte 0x00 8.--15. 1. " INTID229 ,Interrupt ID229 Priority/Priority Byte Offset 229 " hexmask.long.byte 0x00 0.--7. 1. " INTID228 ,Interrupt ID228 Priority/Priority Byte Offset 228 " group.long 0x4E8++0x03 line.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58" hexmask.long.byte 0x00 24.--31. 1. " INTID235 ,Interrupt ID235 Priority/Priority Byte Offset 235 " hexmask.long.byte 0x00 16.--23. 1. " INTID234 ,Interrupt ID234 Priority/Priority Byte Offset 234 " hexmask.long.byte 0x00 8.--15. 1. " INTID233 ,Interrupt ID233 Priority/Priority Byte Offset 233 " hexmask.long.byte 0x00 0.--7. 1. " INTID232 ,Interrupt ID232 Priority/Priority Byte Offset 232 " group.long 0x4EC++0x03 line.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59" hexmask.long.byte 0x00 24.--31. 1. " INTID239 ,Interrupt ID239 Priority/Priority Byte Offset 239 " hexmask.long.byte 0x00 16.--23. 1. " INTID238 ,Interrupt ID238 Priority/Priority Byte Offset 238 " hexmask.long.byte 0x00 8.--15. 1. " INTID237 ,Interrupt ID237 Priority/Priority Byte Offset 237 " hexmask.long.byte 0x00 0.--7. 1. " INTID236 ,Interrupt ID236 Priority/Priority Byte Offset 236 " group.long 0x4F0++0x03 line.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60" hexmask.long.byte 0x00 24.--31. 1. " INTID243 ,Interrupt ID243 Priority/Priority Byte Offset 243 " hexmask.long.byte 0x00 16.--23. 1. " INTID242 ,Interrupt ID242 Priority/Priority Byte Offset 242 " hexmask.long.byte 0x00 8.--15. 1. " INTID241 ,Interrupt ID241 Priority/Priority Byte Offset 241 " hexmask.long.byte 0x00 0.--7. 1. " INTID240 ,Interrupt ID240 Priority/Priority Byte Offset 240 " group.long 0x4F4++0x03 line.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61" hexmask.long.byte 0x00 24.--31. 1. " INTID247 ,Interrupt ID247 Priority/Priority Byte Offset 247 " hexmask.long.byte 0x00 16.--23. 1. " INTID246 ,Interrupt ID246 Priority/Priority Byte Offset 246 " hexmask.long.byte 0x00 8.--15. 1. " INTID245 ,Interrupt ID245 Priority/Priority Byte Offset 245 " hexmask.long.byte 0x00 0.--7. 1. " INTID244 ,Interrupt ID244 Priority/Priority Byte Offset 244 " group.long 0x4F8++0x03 line.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62" hexmask.long.byte 0x00 24.--31. 1. " INTID251 ,Interrupt ID251 Priority/Priority Byte Offset 251 " hexmask.long.byte 0x00 16.--23. 1. " INTID250 ,Interrupt ID250 Priority/Priority Byte Offset 250 " hexmask.long.byte 0x00 8.--15. 1. " INTID249 ,Interrupt ID249 Priority/Priority Byte Offset 249 " hexmask.long.byte 0x00 0.--7. 1. " INTID248 ,Interrupt ID248 Priority/Priority Byte Offset 248 " group.long 0x4FC++0x03 line.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63" hexmask.long.byte 0x00 24.--31. 1. " INTID255 ,Interrupt ID255 Priority/Priority Byte Offset 255 " hexmask.long.byte 0x00 16.--23. 1. " INTID254 ,Interrupt ID254 Priority/Priority Byte Offset 254 " hexmask.long.byte 0x00 8.--15. 1. " INTID253 ,Interrupt ID253 Priority/Priority Byte Offset 253 " hexmask.long.byte 0x00 0.--7. 1. " INTID252 ,Interrupt ID252 Priority/Priority Byte Offset 252 " else hgroup.long 0x4E0++0x03 hide.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56" hgroup.long 0x4E4++0x03 hide.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57" hgroup.long 0x4E8++0x03 hide.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58" hgroup.long 0x4EC++0x03 hide.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59" hgroup.long 0x4F0++0x03 hide.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60" hgroup.long 0x4F4++0x03 hide.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61" hgroup.long 0x4F8++0x03 hide.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62" hgroup.long 0x4FC++0x03 hide.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x08) group.long 0x500++0x03 line.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64" hexmask.long.byte 0x00 24.--31. 1. " INTID259 ,Interrupt ID259 Priority/Priority Byte Offset 259 " hexmask.long.byte 0x00 16.--23. 1. " INTID258 ,Interrupt ID258 Priority/Priority Byte Offset 258 " hexmask.long.byte 0x00 8.--15. 1. " INTID257 ,Interrupt ID257 Priority/Priority Byte Offset 257 " hexmask.long.byte 0x00 0.--7. 1. " INTID256 ,Interrupt ID256 Priority/Priority Byte Offset 256 " group.long 0x504++0x03 line.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65" hexmask.long.byte 0x00 24.--31. 1. " INTID263 ,Interrupt ID263 Priority/Priority Byte Offset 263 " hexmask.long.byte 0x00 16.--23. 1. " INTID262 ,Interrupt ID262 Priority/Priority Byte Offset 262 " hexmask.long.byte 0x00 8.--15. 1. " INTID261 ,Interrupt ID261 Priority/Priority Byte Offset 261 " hexmask.long.byte 0x00 0.--7. 1. " INTID260 ,Interrupt ID260 Priority/Priority Byte Offset 260 " group.long 0x508++0x03 line.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66" hexmask.long.byte 0x00 24.--31. 1. " INTID267 ,Interrupt ID267 Priority/Priority Byte Offset 267 " hexmask.long.byte 0x00 16.--23. 1. " INTID266 ,Interrupt ID266 Priority/Priority Byte Offset 266 " hexmask.long.byte 0x00 8.--15. 1. " INTID265 ,Interrupt ID265 Priority/Priority Byte Offset 265 " hexmask.long.byte 0x00 0.--7. 1. " INTID264 ,Interrupt ID264 Priority/Priority Byte Offset 264 " group.long 0x50C++0x03 line.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67" hexmask.long.byte 0x00 24.--31. 1. " INTID271 ,Interrupt ID271 Priority/Priority Byte Offset 271 " hexmask.long.byte 0x00 16.--23. 1. " INTID270 ,Interrupt ID270 Priority/Priority Byte Offset 270 " hexmask.long.byte 0x00 8.--15. 1. " INTID269 ,Interrupt ID269 Priority/Priority Byte Offset 269 " hexmask.long.byte 0x00 0.--7. 1. " INTID268 ,Interrupt ID268 Priority/Priority Byte Offset 268 " group.long 0x510++0x03 line.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68" hexmask.long.byte 0x00 24.--31. 1. " INTID275 ,Interrupt ID275 Priority/Priority Byte Offset 275 " hexmask.long.byte 0x00 16.--23. 1. " INTID274 ,Interrupt ID274 Priority/Priority Byte Offset 274 " hexmask.long.byte 0x00 8.--15. 1. " INTID273 ,Interrupt ID273 Priority/Priority Byte Offset 273 " hexmask.long.byte 0x00 0.--7. 1. " INTID272 ,Interrupt ID272 Priority/Priority Byte Offset 272 " group.long 0x514++0x03 line.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69" hexmask.long.byte 0x00 24.--31. 1. " INTID279 ,Interrupt ID279 Priority/Priority Byte Offset 279 " hexmask.long.byte 0x00 16.--23. 1. " INTID278 ,Interrupt ID278 Priority/Priority Byte Offset 278 " hexmask.long.byte 0x00 8.--15. 1. " INTID277 ,Interrupt ID277 Priority/Priority Byte Offset 277 " hexmask.long.byte 0x00 0.--7. 1. " INTID276 ,Interrupt ID276 Priority/Priority Byte Offset 276 " group.long 0x518++0x03 line.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70" hexmask.long.byte 0x00 24.--31. 1. " INTID283 ,Interrupt ID283 Priority/Priority Byte Offset 283 " hexmask.long.byte 0x00 16.--23. 1. " INTID282 ,Interrupt ID282 Priority/Priority Byte Offset 282 " hexmask.long.byte 0x00 8.--15. 1. " INTID281 ,Interrupt ID281 Priority/Priority Byte Offset 281 " hexmask.long.byte 0x00 0.--7. 1. " INTID280 ,Interrupt ID280 Priority/Priority Byte Offset 280 " group.long 0x51C++0x03 line.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71" hexmask.long.byte 0x00 24.--31. 1. " INTID287 ,Interrupt ID287 Priority/Priority Byte Offset 287 " hexmask.long.byte 0x00 16.--23. 1. " INTID286 ,Interrupt ID286 Priority/Priority Byte Offset 286 " hexmask.long.byte 0x00 8.--15. 1. " INTID285 ,Interrupt ID285 Priority/Priority Byte Offset 285 " hexmask.long.byte 0x00 0.--7. 1. " INTID284 ,Interrupt ID284 Priority/Priority Byte Offset 284 " else hgroup.long 0x500++0x03 hide.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64" hgroup.long 0x504++0x03 hide.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65" hgroup.long 0x508++0x03 hide.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66" hgroup.long 0x50C++0x03 hide.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67" hgroup.long 0x510++0x03 hide.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68" hgroup.long 0x514++0x03 hide.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69" hgroup.long 0x518++0x03 hide.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70" hgroup.long 0x51C++0x03 hide.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x09) group.long 0x520++0x03 line.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72" hexmask.long.byte 0x00 24.--31. 1. " INTID291 ,Interrupt ID291 Priority/Priority Byte Offset 291 " hexmask.long.byte 0x00 16.--23. 1. " INTID290 ,Interrupt ID290 Priority/Priority Byte Offset 290 " hexmask.long.byte 0x00 8.--15. 1. " INTID289 ,Interrupt ID289 Priority/Priority Byte Offset 289 " hexmask.long.byte 0x00 0.--7. 1. " INTID288 ,Interrupt ID288 Priority/Priority Byte Offset 288 " group.long 0x524++0x03 line.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73" hexmask.long.byte 0x00 24.--31. 1. " INTID295 ,Interrupt ID295 Priority/Priority Byte Offset 295 " hexmask.long.byte 0x00 16.--23. 1. " INTID294 ,Interrupt ID294 Priority/Priority Byte Offset 294 " hexmask.long.byte 0x00 8.--15. 1. " INTID293 ,Interrupt ID293 Priority/Priority Byte Offset 293 " hexmask.long.byte 0x00 0.--7. 1. " INTID292 ,Interrupt ID292 Priority/Priority Byte Offset 292 " group.long 0x528++0x03 line.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74" hexmask.long.byte 0x00 24.--31. 1. " INTID299 ,Interrupt ID299 Priority/Priority Byte Offset 299 " hexmask.long.byte 0x00 16.--23. 1. " INTID298 ,Interrupt ID298 Priority/Priority Byte Offset 298 " hexmask.long.byte 0x00 8.--15. 1. " INTID297 ,Interrupt ID297 Priority/Priority Byte Offset 297 " hexmask.long.byte 0x00 0.--7. 1. " INTID296 ,Interrupt ID296 Priority/Priority Byte Offset 296 " group.long 0x52C++0x03 line.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75" hexmask.long.byte 0x00 24.--31. 1. " INTID303 ,Interrupt ID303 Priority/Priority Byte Offset 303 " hexmask.long.byte 0x00 16.--23. 1. " INTID302 ,Interrupt ID302 Priority/Priority Byte Offset 302 " hexmask.long.byte 0x00 8.--15. 1. " INTID301 ,Interrupt ID301 Priority/Priority Byte Offset 301 " hexmask.long.byte 0x00 0.--7. 1. " INTID300 ,Interrupt ID300 Priority/Priority Byte Offset 300 " group.long 0x530++0x03 line.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76" hexmask.long.byte 0x00 24.--31. 1. " INTID307 ,Interrupt ID307 Priority/Priority Byte Offset 307 " hexmask.long.byte 0x00 16.--23. 1. " INTID306 ,Interrupt ID306 Priority/Priority Byte Offset 306 " hexmask.long.byte 0x00 8.--15. 1. " INTID305 ,Interrupt ID305 Priority/Priority Byte Offset 305 " hexmask.long.byte 0x00 0.--7. 1. " INTID304 ,Interrupt ID304 Priority/Priority Byte Offset 304 " group.long 0x534++0x03 line.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77" hexmask.long.byte 0x00 24.--31. 1. " INTID311 ,Interrupt ID311 Priority/Priority Byte Offset 311 " hexmask.long.byte 0x00 16.--23. 1. " INTID310 ,Interrupt ID310 Priority/Priority Byte Offset 310 " hexmask.long.byte 0x00 8.--15. 1. " INTID309 ,Interrupt ID309 Priority/Priority Byte Offset 309 " hexmask.long.byte 0x00 0.--7. 1. " INTID308 ,Interrupt ID308 Priority/Priority Byte Offset 308 " group.long 0x538++0x03 line.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78" hexmask.long.byte 0x00 24.--31. 1. " INTID315 ,Interrupt ID315 Priority/Priority Byte Offset 315 " hexmask.long.byte 0x00 16.--23. 1. " INTID314 ,Interrupt ID314 Priority/Priority Byte Offset 314 " hexmask.long.byte 0x00 8.--15. 1. " INTID313 ,Interrupt ID313 Priority/Priority Byte Offset 313 " hexmask.long.byte 0x00 0.--7. 1. " INTID312 ,Interrupt ID312 Priority/Priority Byte Offset 312 " group.long 0x53C++0x03 line.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79" hexmask.long.byte 0x00 24.--31. 1. " INTID319 ,Interrupt ID319 Priority/Priority Byte Offset 319 " hexmask.long.byte 0x00 16.--23. 1. " INTID318 ,Interrupt ID318 Priority/Priority Byte Offset 318 " hexmask.long.byte 0x00 8.--15. 1. " INTID317 ,Interrupt ID317 Priority/Priority Byte Offset 317 " hexmask.long.byte 0x00 0.--7. 1. " INTID316 ,Interrupt ID316 Priority/Priority Byte Offset 316 " else hgroup.long 0x520++0x03 hide.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72" hgroup.long 0x524++0x03 hide.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73" hgroup.long 0x528++0x03 hide.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74" hgroup.long 0x52C++0x03 hide.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75" hgroup.long 0x530++0x03 hide.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76" hgroup.long 0x534++0x03 hide.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77" hgroup.long 0x538++0x03 hide.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78" hgroup.long 0x53C++0x03 hide.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0A) group.long 0x540++0x03 line.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80" hexmask.long.byte 0x00 24.--31. 1. " INTID323 ,Interrupt ID323 Priority/Priority Byte Offset 323 " hexmask.long.byte 0x00 16.--23. 1. " INTID322 ,Interrupt ID322 Priority/Priority Byte Offset 322 " hexmask.long.byte 0x00 8.--15. 1. " INTID321 ,Interrupt ID321 Priority/Priority Byte Offset 321 " hexmask.long.byte 0x00 0.--7. 1. " INTID320 ,Interrupt ID320 Priority/Priority Byte Offset 320 " group.long 0x544++0x03 line.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81" hexmask.long.byte 0x00 24.--31. 1. " INTID327 ,Interrupt ID327 Priority/Priority Byte Offset 327 " hexmask.long.byte 0x00 16.--23. 1. " INTID326 ,Interrupt ID326 Priority/Priority Byte Offset 326 " hexmask.long.byte 0x00 8.--15. 1. " INTID325 ,Interrupt ID325 Priority/Priority Byte Offset 325 " hexmask.long.byte 0x00 0.--7. 1. " INTID324 ,Interrupt ID324 Priority/Priority Byte Offset 324 " group.long 0x548++0x03 line.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82" hexmask.long.byte 0x00 24.--31. 1. " INTID331 ,Interrupt ID331 Priority/Priority Byte Offset 331 " hexmask.long.byte 0x00 16.--23. 1. " INTID330 ,Interrupt ID330 Priority/Priority Byte Offset 330 " hexmask.long.byte 0x00 8.--15. 1. " INTID329 ,Interrupt ID329 Priority/Priority Byte Offset 329 " hexmask.long.byte 0x00 0.--7. 1. " INTID328 ,Interrupt ID328 Priority/Priority Byte Offset 328 " group.long 0x54C++0x03 line.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83" hexmask.long.byte 0x00 24.--31. 1. " INTID335 ,Interrupt ID335 Priority/Priority Byte Offset 335 " hexmask.long.byte 0x00 16.--23. 1. " INTID334 ,Interrupt ID334 Priority/Priority Byte Offset 334 " hexmask.long.byte 0x00 8.--15. 1. " INTID333 ,Interrupt ID333 Priority/Priority Byte Offset 333 " hexmask.long.byte 0x00 0.--7. 1. " INTID332 ,Interrupt ID332 Priority/Priority Byte Offset 332 " group.long 0x550++0x03 line.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84" hexmask.long.byte 0x00 24.--31. 1. " INTID339 ,Interrupt ID339 Priority/Priority Byte Offset 339 " hexmask.long.byte 0x00 16.--23. 1. " INTID338 ,Interrupt ID338 Priority/Priority Byte Offset 338 " hexmask.long.byte 0x00 8.--15. 1. " INTID337 ,Interrupt ID337 Priority/Priority Byte Offset 337 " hexmask.long.byte 0x00 0.--7. 1. " INTID336 ,Interrupt ID336 Priority/Priority Byte Offset 336 " group.long 0x554++0x03 line.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85" hexmask.long.byte 0x00 24.--31. 1. " INTID343 ,Interrupt ID343 Priority/Priority Byte Offset 343 " hexmask.long.byte 0x00 16.--23. 1. " INTID342 ,Interrupt ID342 Priority/Priority Byte Offset 342 " hexmask.long.byte 0x00 8.--15. 1. " INTID341 ,Interrupt ID341 Priority/Priority Byte Offset 341 " hexmask.long.byte 0x00 0.--7. 1. " INTID340 ,Interrupt ID340 Priority/Priority Byte Offset 340 " group.long 0x558++0x03 line.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86" hexmask.long.byte 0x00 24.--31. 1. " INTID347 ,Interrupt ID347 Priority/Priority Byte Offset 347 " hexmask.long.byte 0x00 16.--23. 1. " INTID346 ,Interrupt ID346 Priority/Priority Byte Offset 346 " hexmask.long.byte 0x00 8.--15. 1. " INTID345 ,Interrupt ID345 Priority/Priority Byte Offset 345 " hexmask.long.byte 0x00 0.--7. 1. " INTID344 ,Interrupt ID344 Priority/Priority Byte Offset 344 " group.long 0x55C++0x03 line.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87" hexmask.long.byte 0x00 24.--31. 1. " INTID351 ,Interrupt ID351 Priority/Priority Byte Offset 351 " hexmask.long.byte 0x00 16.--23. 1. " INTID350 ,Interrupt ID350 Priority/Priority Byte Offset 350 " hexmask.long.byte 0x00 8.--15. 1. " INTID349 ,Interrupt ID349 Priority/Priority Byte Offset 349 " hexmask.long.byte 0x00 0.--7. 1. " INTID348 ,Interrupt ID348 Priority/Priority Byte Offset 348 " else hgroup.long 0x540++0x03 hide.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80" hgroup.long 0x544++0x03 hide.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81" hgroup.long 0x548++0x03 hide.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82" hgroup.long 0x54C++0x03 hide.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83" hgroup.long 0x550++0x03 hide.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84" hgroup.long 0x554++0x03 hide.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85" hgroup.long 0x558++0x03 hide.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86" hgroup.long 0x55C++0x03 hide.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0B) group.long 0x560++0x03 line.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88" hexmask.long.byte 0x00 24.--31. 1. " INTID355 ,Interrupt ID355 Priority/Priority Byte Offset 355 " hexmask.long.byte 0x00 16.--23. 1. " INTID354 ,Interrupt ID354 Priority/Priority Byte Offset 354 " hexmask.long.byte 0x00 8.--15. 1. " INTID353 ,Interrupt ID353 Priority/Priority Byte Offset 353 " hexmask.long.byte 0x00 0.--7. 1. " INTID352 ,Interrupt ID352 Priority/Priority Byte Offset 352 " group.long 0x564++0x03 line.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89" hexmask.long.byte 0x00 24.--31. 1. " INTID359 ,Interrupt ID359 Priority/Priority Byte Offset 359 " hexmask.long.byte 0x00 16.--23. 1. " INTID358 ,Interrupt ID358 Priority/Priority Byte Offset 358 " hexmask.long.byte 0x00 8.--15. 1. " INTID357 ,Interrupt ID357 Priority/Priority Byte Offset 357 " hexmask.long.byte 0x00 0.--7. 1. " INTID356 ,Interrupt ID356 Priority/Priority Byte Offset 356 " group.long 0x568++0x03 line.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90" hexmask.long.byte 0x00 24.--31. 1. " INTID363 ,Interrupt ID363 Priority/Priority Byte Offset 363 " hexmask.long.byte 0x00 16.--23. 1. " INTID362 ,Interrupt ID362 Priority/Priority Byte Offset 362 " hexmask.long.byte 0x00 8.--15. 1. " INTID361 ,Interrupt ID361 Priority/Priority Byte Offset 361 " hexmask.long.byte 0x00 0.--7. 1. " INTID360 ,Interrupt ID360 Priority/Priority Byte Offset 360 " group.long 0x56C++0x03 line.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91" hexmask.long.byte 0x00 24.--31. 1. " INTID367 ,Interrupt ID367 Priority/Priority Byte Offset 367 " hexmask.long.byte 0x00 16.--23. 1. " INTID366 ,Interrupt ID366 Priority/Priority Byte Offset 366 " hexmask.long.byte 0x00 8.--15. 1. " INTID365 ,Interrupt ID365 Priority/Priority Byte Offset 365 " hexmask.long.byte 0x00 0.--7. 1. " INTID364 ,Interrupt ID364 Priority/Priority Byte Offset 364 " group.long 0x570++0x03 line.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92" hexmask.long.byte 0x00 24.--31. 1. " INTID371 ,Interrupt ID371 Priority/Priority Byte Offset 371 " hexmask.long.byte 0x00 16.--23. 1. " INTID370 ,Interrupt ID370 Priority/Priority Byte Offset 370 " hexmask.long.byte 0x00 8.--15. 1. " INTID369 ,Interrupt ID369 Priority/Priority Byte Offset 369 " hexmask.long.byte 0x00 0.--7. 1. " INTID368 ,Interrupt ID368 Priority/Priority Byte Offset 368 " group.long 0x574++0x03 line.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93" hexmask.long.byte 0x00 24.--31. 1. " INTID375 ,Interrupt ID375 Priority/Priority Byte Offset 375 " hexmask.long.byte 0x00 16.--23. 1. " INTID374 ,Interrupt ID374 Priority/Priority Byte Offset 374 " hexmask.long.byte 0x00 8.--15. 1. " INTID373 ,Interrupt ID373 Priority/Priority Byte Offset 373 " hexmask.long.byte 0x00 0.--7. 1. " INTID372 ,Interrupt ID372 Priority/Priority Byte Offset 372 " group.long 0x578++0x03 line.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94" hexmask.long.byte 0x00 24.--31. 1. " INTID379 ,Interrupt ID379 Priority/Priority Byte Offset 379 " hexmask.long.byte 0x00 16.--23. 1. " INTID378 ,Interrupt ID378 Priority/Priority Byte Offset 378 " hexmask.long.byte 0x00 8.--15. 1. " INTID377 ,Interrupt ID377 Priority/Priority Byte Offset 377 " hexmask.long.byte 0x00 0.--7. 1. " INTID376 ,Interrupt ID376 Priority/Priority Byte Offset 376 " group.long 0x57C++0x03 line.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95" hexmask.long.byte 0x00 24.--31. 1. " INTID383 ,Interrupt ID383 Priority/Priority Byte Offset 383 " hexmask.long.byte 0x00 16.--23. 1. " INTID382 ,Interrupt ID382 Priority/Priority Byte Offset 382 " hexmask.long.byte 0x00 8.--15. 1. " INTID381 ,Interrupt ID381 Priority/Priority Byte Offset 381 " hexmask.long.byte 0x00 0.--7. 1. " INTID380 ,Interrupt ID380 Priority/Priority Byte Offset 380 " else hgroup.long 0x560++0x03 hide.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88" hgroup.long 0x564++0x03 hide.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89" hgroup.long 0x568++0x03 hide.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90" hgroup.long 0x56C++0x03 hide.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91" hgroup.long 0x570++0x03 hide.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92" hgroup.long 0x574++0x03 hide.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93" hgroup.long 0x578++0x03 hide.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94" hgroup.long 0x57C++0x03 hide.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0C) group.long 0x580++0x03 line.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96" hexmask.long.byte 0x00 24.--31. 1. " INTID387 ,Interrupt ID387 Priority/Priority Byte Offset 387 " hexmask.long.byte 0x00 16.--23. 1. " INTID386 ,Interrupt ID386 Priority/Priority Byte Offset 386 " hexmask.long.byte 0x00 8.--15. 1. " INTID385 ,Interrupt ID385 Priority/Priority Byte Offset 385 " hexmask.long.byte 0x00 0.--7. 1. " INTID384 ,Interrupt ID384 Priority/Priority Byte Offset 384 " group.long 0x584++0x03 line.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97" hexmask.long.byte 0x00 24.--31. 1. " INTID391 ,Interrupt ID391 Priority/Priority Byte Offset 391 " hexmask.long.byte 0x00 16.--23. 1. " INTID390 ,Interrupt ID390 Priority/Priority Byte Offset 390 " hexmask.long.byte 0x00 8.--15. 1. " INTID389 ,Interrupt ID389 Priority/Priority Byte Offset 389 " hexmask.long.byte 0x00 0.--7. 1. " INTID388 ,Interrupt ID388 Priority/Priority Byte Offset 388 " group.long 0x588++0x03 line.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98" hexmask.long.byte 0x00 24.--31. 1. " INTID395 ,Interrupt ID395 Priority/Priority Byte Offset 395 " hexmask.long.byte 0x00 16.--23. 1. " INTID394 ,Interrupt ID394 Priority/Priority Byte Offset 394 " hexmask.long.byte 0x00 8.--15. 1. " INTID393 ,Interrupt ID393 Priority/Priority Byte Offset 393 " hexmask.long.byte 0x00 0.--7. 1. " INTID392 ,Interrupt ID392 Priority/Priority Byte Offset 392 " group.long 0x58C++0x03 line.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99" hexmask.long.byte 0x00 24.--31. 1. " INTID399 ,Interrupt ID399 Priority/Priority Byte Offset 399 " hexmask.long.byte 0x00 16.--23. 1. " INTID398 ,Interrupt ID398 Priority/Priority Byte Offset 398 " hexmask.long.byte 0x00 8.--15. 1. " INTID397 ,Interrupt ID397 Priority/Priority Byte Offset 397 " hexmask.long.byte 0x00 0.--7. 1. " INTID396 ,Interrupt ID396 Priority/Priority Byte Offset 396 " group.long 0x590++0x03 line.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100" hexmask.long.byte 0x00 24.--31. 1. " INTID403 ,Interrupt ID403 Priority/Priority Byte Offset 403 " hexmask.long.byte 0x00 16.--23. 1. " INTID402 ,Interrupt ID402 Priority/Priority Byte Offset 402 " hexmask.long.byte 0x00 8.--15. 1. " INTID401 ,Interrupt ID401 Priority/Priority Byte Offset 401 " hexmask.long.byte 0x00 0.--7. 1. " INTID400 ,Interrupt ID400 Priority/Priority Byte Offset 400 " group.long 0x594++0x03 line.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101" hexmask.long.byte 0x00 24.--31. 1. " INTID407 ,Interrupt ID407 Priority/Priority Byte Offset 407 " hexmask.long.byte 0x00 16.--23. 1. " INTID406 ,Interrupt ID406 Priority/Priority Byte Offset 406 " hexmask.long.byte 0x00 8.--15. 1. " INTID405 ,Interrupt ID405 Priority/Priority Byte Offset 405 " hexmask.long.byte 0x00 0.--7. 1. " INTID404 ,Interrupt ID404 Priority/Priority Byte Offset 404 " group.long 0x598++0x03 line.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102" hexmask.long.byte 0x00 24.--31. 1. " INTID411 ,Interrupt ID411 Priority/Priority Byte Offset 411 " hexmask.long.byte 0x00 16.--23. 1. " INTID410 ,Interrupt ID410 Priority/Priority Byte Offset 410 " hexmask.long.byte 0x00 8.--15. 1. " INTID409 ,Interrupt ID409 Priority/Priority Byte Offset 409 " hexmask.long.byte 0x00 0.--7. 1. " INTID408 ,Interrupt ID408 Priority/Priority Byte Offset 408 " group.long 0x59C++0x03 line.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103" hexmask.long.byte 0x00 24.--31. 1. " INTID415 ,Interrupt ID415 Priority/Priority Byte Offset 415 " hexmask.long.byte 0x00 16.--23. 1. " INTID414 ,Interrupt ID414 Priority/Priority Byte Offset 414 " hexmask.long.byte 0x00 8.--15. 1. " INTID413 ,Interrupt ID413 Priority/Priority Byte Offset 413 " hexmask.long.byte 0x00 0.--7. 1. " INTID412 ,Interrupt ID412 Priority/Priority Byte Offset 412 " else hgroup.long 0x580++0x03 hide.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96" hgroup.long 0x584++0x03 hide.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97" hgroup.long 0x588++0x03 hide.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98" hgroup.long 0x58C++0x03 hide.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99" hgroup.long 0x590++0x03 hide.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100" hgroup.long 0x594++0x03 hide.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101" hgroup.long 0x598++0x03 hide.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102" hgroup.long 0x59C++0x03 hide.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0D) group.long 0x5A0++0x03 line.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104" hexmask.long.byte 0x00 24.--31. 1. " INTID419 ,Interrupt ID419 Priority/Priority Byte Offset 419 " hexmask.long.byte 0x00 16.--23. 1. " INTID418 ,Interrupt ID418 Priority/Priority Byte Offset 418 " hexmask.long.byte 0x00 8.--15. 1. " INTID417 ,Interrupt ID417 Priority/Priority Byte Offset 417 " hexmask.long.byte 0x00 0.--7. 1. " INTID416 ,Interrupt ID416 Priority/Priority Byte Offset 416 " group.long 0x5A4++0x03 line.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105" hexmask.long.byte 0x00 24.--31. 1. " INTID423 ,Interrupt ID423 Priority/Priority Byte Offset 423 " hexmask.long.byte 0x00 16.--23. 1. " INTID422 ,Interrupt ID422 Priority/Priority Byte Offset 422 " hexmask.long.byte 0x00 8.--15. 1. " INTID421 ,Interrupt ID421 Priority/Priority Byte Offset 421 " hexmask.long.byte 0x00 0.--7. 1. " INTID420 ,Interrupt ID420 Priority/Priority Byte Offset 420 " group.long 0x5A8++0x03 line.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106" hexmask.long.byte 0x00 24.--31. 1. " INTID427 ,Interrupt ID427 Priority/Priority Byte Offset 427 " hexmask.long.byte 0x00 16.--23. 1. " INTID426 ,Interrupt ID426 Priority/Priority Byte Offset 426 " hexmask.long.byte 0x00 8.--15. 1. " INTID425 ,Interrupt ID425 Priority/Priority Byte Offset 425 " hexmask.long.byte 0x00 0.--7. 1. " INTID424 ,Interrupt ID424 Priority/Priority Byte Offset 424 " group.long 0x5AC++0x03 line.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107" hexmask.long.byte 0x00 24.--31. 1. " INTID431 ,Interrupt ID431 Priority/Priority Byte Offset 431 " hexmask.long.byte 0x00 16.--23. 1. " INTID430 ,Interrupt ID430 Priority/Priority Byte Offset 430 " hexmask.long.byte 0x00 8.--15. 1. " INTID429 ,Interrupt ID429 Priority/Priority Byte Offset 429 " hexmask.long.byte 0x00 0.--7. 1. " INTID428 ,Interrupt ID428 Priority/Priority Byte Offset 428 " group.long 0x5B0++0x03 line.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108" hexmask.long.byte 0x00 24.--31. 1. " INTID435 ,Interrupt ID435 Priority/Priority Byte Offset 435 " hexmask.long.byte 0x00 16.--23. 1. " INTID434 ,Interrupt ID434 Priority/Priority Byte Offset 434 " hexmask.long.byte 0x00 8.--15. 1. " INTID433 ,Interrupt ID433 Priority/Priority Byte Offset 433 " hexmask.long.byte 0x00 0.--7. 1. " INTID432 ,Interrupt ID432 Priority/Priority Byte Offset 432 " group.long 0x5B4++0x03 line.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109" hexmask.long.byte 0x00 24.--31. 1. " INTID439 ,Interrupt ID439 Priority/Priority Byte Offset 439 " hexmask.long.byte 0x00 16.--23. 1. " INTID438 ,Interrupt ID438 Priority/Priority Byte Offset 438 " hexmask.long.byte 0x00 8.--15. 1. " INTID437 ,Interrupt ID437 Priority/Priority Byte Offset 437 " hexmask.long.byte 0x00 0.--7. 1. " INTID436 ,Interrupt ID436 Priority/Priority Byte Offset 436 " group.long 0x5B8++0x03 line.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110" hexmask.long.byte 0x00 24.--31. 1. " INTID443 ,Interrupt ID443 Priority/Priority Byte Offset 443 " hexmask.long.byte 0x00 16.--23. 1. " INTID442 ,Interrupt ID442 Priority/Priority Byte Offset 442 " hexmask.long.byte 0x00 8.--15. 1. " INTID441 ,Interrupt ID441 Priority/Priority Byte Offset 441 " hexmask.long.byte 0x00 0.--7. 1. " INTID440 ,Interrupt ID440 Priority/Priority Byte Offset 440 " group.long 0x5BC++0x03 line.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111" hexmask.long.byte 0x00 24.--31. 1. " INTID447 ,Interrupt ID447 Priority/Priority Byte Offset 447 " hexmask.long.byte 0x00 16.--23. 1. " INTID446 ,Interrupt ID446 Priority/Priority Byte Offset 446 " hexmask.long.byte 0x00 8.--15. 1. " INTID445 ,Interrupt ID445 Priority/Priority Byte Offset 445 " hexmask.long.byte 0x00 0.--7. 1. " INTID444 ,Interrupt ID444 Priority/Priority Byte Offset 444 " else hgroup.long 0x5A0++0x03 hide.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104" hgroup.long 0x5A4++0x03 hide.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105" hgroup.long 0x5A8++0x03 hide.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106" hgroup.long 0x5AC++0x03 hide.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107" hgroup.long 0x5B0++0x03 hide.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108" hgroup.long 0x5B4++0x03 hide.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109" hgroup.long 0x5B8++0x03 hide.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110" hgroup.long 0x5BC++0x03 hide.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0E) group.long 0x5C0++0x03 line.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112" hexmask.long.byte 0x00 24.--31. 1. " INTID451 ,Interrupt ID451 Priority/Priority Byte Offset 451 " hexmask.long.byte 0x00 16.--23. 1. " INTID450 ,Interrupt ID450 Priority/Priority Byte Offset 450 " hexmask.long.byte 0x00 8.--15. 1. " INTID449 ,Interrupt ID449 Priority/Priority Byte Offset 449 " hexmask.long.byte 0x00 0.--7. 1. " INTID448 ,Interrupt ID448 Priority/Priority Byte Offset 448 " group.long 0x5C4++0x03 line.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113" hexmask.long.byte 0x00 24.--31. 1. " INTID455 ,Interrupt ID455 Priority/Priority Byte Offset 455 " hexmask.long.byte 0x00 16.--23. 1. " INTID454 ,Interrupt ID454 Priority/Priority Byte Offset 454 " hexmask.long.byte 0x00 8.--15. 1. " INTID453 ,Interrupt ID453 Priority/Priority Byte Offset 453 " hexmask.long.byte 0x00 0.--7. 1. " INTID452 ,Interrupt ID452 Priority/Priority Byte Offset 452 " group.long 0x5C8++0x03 line.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114" hexmask.long.byte 0x00 24.--31. 1. " INTID459 ,Interrupt ID459 Priority/Priority Byte Offset 459 " hexmask.long.byte 0x00 16.--23. 1. " INTID458 ,Interrupt ID458 Priority/Priority Byte Offset 458 " hexmask.long.byte 0x00 8.--15. 1. " INTID457 ,Interrupt ID457 Priority/Priority Byte Offset 457 " hexmask.long.byte 0x00 0.--7. 1. " INTID456 ,Interrupt ID456 Priority/Priority Byte Offset 456 " group.long 0x5CC++0x03 line.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115" hexmask.long.byte 0x00 24.--31. 1. " INTID463 ,Interrupt ID463 Priority/Priority Byte Offset 463 " hexmask.long.byte 0x00 16.--23. 1. " INTID462 ,Interrupt ID462 Priority/Priority Byte Offset 462 " hexmask.long.byte 0x00 8.--15. 1. " INTID461 ,Interrupt ID461 Priority/Priority Byte Offset 461 " hexmask.long.byte 0x00 0.--7. 1. " INTID460 ,Interrupt ID460 Priority/Priority Byte Offset 460 " group.long 0x5D0++0x03 line.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116" hexmask.long.byte 0x00 24.--31. 1. " INTID467 ,Interrupt ID467 Priority/Priority Byte Offset 467 " hexmask.long.byte 0x00 16.--23. 1. " INTID466 ,Interrupt ID466 Priority/Priority Byte Offset 466 " hexmask.long.byte 0x00 8.--15. 1. " INTID465 ,Interrupt ID465 Priority/Priority Byte Offset 465 " hexmask.long.byte 0x00 0.--7. 1. " INTID464 ,Interrupt ID464 Priority/Priority Byte Offset 464 " group.long 0x5D4++0x03 line.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117" hexmask.long.byte 0x00 24.--31. 1. " INTID471 ,Interrupt ID471 Priority/Priority Byte Offset 471 " hexmask.long.byte 0x00 16.--23. 1. " INTID470 ,Interrupt ID470 Priority/Priority Byte Offset 470 " hexmask.long.byte 0x00 8.--15. 1. " INTID469 ,Interrupt ID469 Priority/Priority Byte Offset 469 " hexmask.long.byte 0x00 0.--7. 1. " INTID468 ,Interrupt ID468 Priority/Priority Byte Offset 468 " group.long 0x5D8++0x03 line.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118" hexmask.long.byte 0x00 24.--31. 1. " INTID475 ,Interrupt ID475 Priority/Priority Byte Offset 475 " hexmask.long.byte 0x00 16.--23. 1. " INTID474 ,Interrupt ID474 Priority/Priority Byte Offset 474 " hexmask.long.byte 0x00 8.--15. 1. " INTID473 ,Interrupt ID473 Priority/Priority Byte Offset 473 " hexmask.long.byte 0x00 0.--7. 1. " INTID472 ,Interrupt ID472 Priority/Priority Byte Offset 472 " group.long 0x5DC++0x03 line.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119" hexmask.long.byte 0x00 24.--31. 1. " INTID479 ,Interrupt ID479 Priority/Priority Byte Offset 479 " hexmask.long.byte 0x00 16.--23. 1. " INTID478 ,Interrupt ID478 Priority/Priority Byte Offset 478 " hexmask.long.byte 0x00 8.--15. 1. " INTID477 ,Interrupt ID477 Priority/Priority Byte Offset 477 " hexmask.long.byte 0x00 0.--7. 1. " INTID476 ,Interrupt ID476 Priority/Priority Byte Offset 476 " else hgroup.long 0x5C0++0x03 hide.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112" hgroup.long 0x5C4++0x03 hide.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113" hgroup.long 0x5C8++0x03 hide.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114" hgroup.long 0x5CC++0x03 hide.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115" hgroup.long 0x5D0++0x03 hide.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116" hgroup.long 0x5D4++0x03 hide.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117" hgroup.long 0x5D8++0x03 hide.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118" hgroup.long 0x5DC++0x03 hide.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0F) group.long 0x5E0++0x03 line.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120" hexmask.long.byte 0x00 24.--31. 1. " INTID483 ,Interrupt ID483 Priority/Priority Byte Offset 483 " hexmask.long.byte 0x00 16.--23. 1. " INTID482 ,Interrupt ID482 Priority/Priority Byte Offset 482 " hexmask.long.byte 0x00 8.--15. 1. " INTID481 ,Interrupt ID481 Priority/Priority Byte Offset 481 " hexmask.long.byte 0x00 0.--7. 1. " INTID480 ,Interrupt ID480 Priority/Priority Byte Offset 480 " group.long 0x5E4++0x03 line.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121" hexmask.long.byte 0x00 24.--31. 1. " INTID487 ,Interrupt ID487 Priority/Priority Byte Offset 487 " hexmask.long.byte 0x00 16.--23. 1. " INTID486 ,Interrupt ID486 Priority/Priority Byte Offset 486 " hexmask.long.byte 0x00 8.--15. 1. " INTID485 ,Interrupt ID485 Priority/Priority Byte Offset 485 " hexmask.long.byte 0x00 0.--7. 1. " INTID484 ,Interrupt ID484 Priority/Priority Byte Offset 484 " group.long 0x5E8++0x03 line.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122" hexmask.long.byte 0x00 24.--31. 1. " INTID491 ,Interrupt ID491 Priority/Priority Byte Offset 491 " hexmask.long.byte 0x00 16.--23. 1. " INTID490 ,Interrupt ID490 Priority/Priority Byte Offset 490 " hexmask.long.byte 0x00 8.--15. 1. " INTID489 ,Interrupt ID489 Priority/Priority Byte Offset 489 " hexmask.long.byte 0x00 0.--7. 1. " INTID488 ,Interrupt ID488 Priority/Priority Byte Offset 488 " group.long 0x5EC++0x03 line.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123" hexmask.long.byte 0x00 24.--31. 1. " INTID495 ,Interrupt ID495 Priority/Priority Byte Offset 495 " hexmask.long.byte 0x00 16.--23. 1. " INTID494 ,Interrupt ID494 Priority/Priority Byte Offset 494 " hexmask.long.byte 0x00 8.--15. 1. " INTID493 ,Interrupt ID493 Priority/Priority Byte Offset 493 " hexmask.long.byte 0x00 0.--7. 1. " INTID492 ,Interrupt ID492 Priority/Priority Byte Offset 492 " group.long 0x5F0++0x03 line.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124" hexmask.long.byte 0x00 24.--31. 1. " INTID499 ,Interrupt ID499 Priority/Priority Byte Offset 499 " hexmask.long.byte 0x00 16.--23. 1. " INTID498 ,Interrupt ID498 Priority/Priority Byte Offset 498 " hexmask.long.byte 0x00 8.--15. 1. " INTID497 ,Interrupt ID497 Priority/Priority Byte Offset 497 " hexmask.long.byte 0x00 0.--7. 1. " INTID496 ,Interrupt ID496 Priority/Priority Byte Offset 496 " group.long 0x5F4++0x03 line.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125" hexmask.long.byte 0x00 24.--31. 1. " INTID503 ,Interrupt ID503 Priority/Priority Byte Offset 503 " hexmask.long.byte 0x00 16.--23. 1. " INTID502 ,Interrupt ID502 Priority/Priority Byte Offset 502 " hexmask.long.byte 0x00 8.--15. 1. " INTID501 ,Interrupt ID501 Priority/Priority Byte Offset 501 " hexmask.long.byte 0x00 0.--7. 1. " INTID500 ,Interrupt ID500 Priority/Priority Byte Offset 500 " group.long 0x5F8++0x03 line.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126" hexmask.long.byte 0x00 24.--31. 1. " INTID507 ,Interrupt ID507 Priority/Priority Byte Offset 507 " hexmask.long.byte 0x00 16.--23. 1. " INTID506 ,Interrupt ID506 Priority/Priority Byte Offset 506 " hexmask.long.byte 0x00 8.--15. 1. " INTID505 ,Interrupt ID505 Priority/Priority Byte Offset 505 " hexmask.long.byte 0x00 0.--7. 1. " INTID504 ,Interrupt ID504 Priority/Priority Byte Offset 504 " group.long 0x5FC++0x03 line.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127" hexmask.long.byte 0x00 24.--31. 1. " INTID511 ,Interrupt ID511 Priority/Priority Byte Offset 511 " hexmask.long.byte 0x00 16.--23. 1. " INTID510 ,Interrupt ID510 Priority/Priority Byte Offset 510 " hexmask.long.byte 0x00 8.--15. 1. " INTID509 ,Interrupt ID509 Priority/Priority Byte Offset 509 " hexmask.long.byte 0x00 0.--7. 1. " INTID508 ,Interrupt ID508 Priority/Priority Byte Offset 508 " else hgroup.long 0x5E0++0x03 hide.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120" hgroup.long 0x5E4++0x03 hide.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121" hgroup.long 0x5E8++0x03 hide.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122" hgroup.long 0x5EC++0x03 hide.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123" hgroup.long 0x5F0++0x03 hide.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124" hgroup.long 0x5F4++0x03 hide.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125" hgroup.long 0x5F8++0x03 hide.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126" hgroup.long 0x5FC++0x03 hide.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x10) group.long 0x600++0x03 line.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128" hexmask.long.byte 0x00 24.--31. 1. " INTID515 ,Interrupt ID515 Priority/Priority Byte Offset 515 " hexmask.long.byte 0x00 16.--23. 1. " INTID514 ,Interrupt ID514 Priority/Priority Byte Offset 514 " hexmask.long.byte 0x00 8.--15. 1. " INTID513 ,Interrupt ID513 Priority/Priority Byte Offset 513 " hexmask.long.byte 0x00 0.--7. 1. " INTID512 ,Interrupt ID512 Priority/Priority Byte Offset 512 " group.long 0x604++0x03 line.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129" hexmask.long.byte 0x00 24.--31. 1. " INTID519 ,Interrupt ID519 Priority/Priority Byte Offset 519 " hexmask.long.byte 0x00 16.--23. 1. " INTID518 ,Interrupt ID518 Priority/Priority Byte Offset 518 " hexmask.long.byte 0x00 8.--15. 1. " INTID517 ,Interrupt ID517 Priority/Priority Byte Offset 517 " hexmask.long.byte 0x00 0.--7. 1. " INTID516 ,Interrupt ID516 Priority/Priority Byte Offset 516 " group.long 0x608++0x03 line.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130" hexmask.long.byte 0x00 24.--31. 1. " INTID523 ,Interrupt ID523 Priority/Priority Byte Offset 523 " hexmask.long.byte 0x00 16.--23. 1. " INTID522 ,Interrupt ID522 Priority/Priority Byte Offset 522 " hexmask.long.byte 0x00 8.--15. 1. " INTID521 ,Interrupt ID521 Priority/Priority Byte Offset 521 " hexmask.long.byte 0x00 0.--7. 1. " INTID520 ,Interrupt ID520 Priority/Priority Byte Offset 520 " group.long 0x60C++0x03 line.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131" hexmask.long.byte 0x00 24.--31. 1. " INTID527 ,Interrupt ID527 Priority/Priority Byte Offset 527 " hexmask.long.byte 0x00 16.--23. 1. " INTID526 ,Interrupt ID526 Priority/Priority Byte Offset 526 " hexmask.long.byte 0x00 8.--15. 1. " INTID525 ,Interrupt ID525 Priority/Priority Byte Offset 525 " hexmask.long.byte 0x00 0.--7. 1. " INTID524 ,Interrupt ID524 Priority/Priority Byte Offset 524 " group.long 0x610++0x03 line.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132" hexmask.long.byte 0x00 24.--31. 1. " INTID531 ,Interrupt ID531 Priority/Priority Byte Offset 531 " hexmask.long.byte 0x00 16.--23. 1. " INTID530 ,Interrupt ID530 Priority/Priority Byte Offset 530 " hexmask.long.byte 0x00 8.--15. 1. " INTID529 ,Interrupt ID529 Priority/Priority Byte Offset 529 " hexmask.long.byte 0x00 0.--7. 1. " INTID528 ,Interrupt ID528 Priority/Priority Byte Offset 528 " group.long 0x614++0x03 line.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133" hexmask.long.byte 0x00 24.--31. 1. " INTID535 ,Interrupt ID535 Priority/Priority Byte Offset 535 " hexmask.long.byte 0x00 16.--23. 1. " INTID534 ,Interrupt ID534 Priority/Priority Byte Offset 534 " hexmask.long.byte 0x00 8.--15. 1. " INTID533 ,Interrupt ID533 Priority/Priority Byte Offset 533 " hexmask.long.byte 0x00 0.--7. 1. " INTID532 ,Interrupt ID532 Priority/Priority Byte Offset 532 " group.long 0x618++0x03 line.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134" hexmask.long.byte 0x00 24.--31. 1. " INTID539 ,Interrupt ID539 Priority/Priority Byte Offset 539 " hexmask.long.byte 0x00 16.--23. 1. " INTID538 ,Interrupt ID538 Priority/Priority Byte Offset 538 " hexmask.long.byte 0x00 8.--15. 1. " INTID537 ,Interrupt ID537 Priority/Priority Byte Offset 537 " hexmask.long.byte 0x00 0.--7. 1. " INTID536 ,Interrupt ID536 Priority/Priority Byte Offset 536 " group.long 0x61C++0x03 line.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135" hexmask.long.byte 0x00 24.--31. 1. " INTID543 ,Interrupt ID543 Priority/Priority Byte Offset 543 " hexmask.long.byte 0x00 16.--23. 1. " INTID542 ,Interrupt ID542 Priority/Priority Byte Offset 542 " hexmask.long.byte 0x00 8.--15. 1. " INTID541 ,Interrupt ID541 Priority/Priority Byte Offset 541 " hexmask.long.byte 0x00 0.--7. 1. " INTID540 ,Interrupt ID540 Priority/Priority Byte Offset 540 " else hgroup.long 0x600++0x03 hide.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128" hgroup.long 0x604++0x03 hide.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129" hgroup.long 0x608++0x03 hide.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130" hgroup.long 0x60C++0x03 hide.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131" hgroup.long 0x610++0x03 hide.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132" hgroup.long 0x614++0x03 hide.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133" hgroup.long 0x618++0x03 hide.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134" hgroup.long 0x61C++0x03 hide.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x11) group.long 0x620++0x03 line.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136" hexmask.long.byte 0x00 24.--31. 1. " INTID547 ,Interrupt ID547 Priority/Priority Byte Offset 547 " hexmask.long.byte 0x00 16.--23. 1. " INTID546 ,Interrupt ID546 Priority/Priority Byte Offset 546 " hexmask.long.byte 0x00 8.--15. 1. " INTID545 ,Interrupt ID545 Priority/Priority Byte Offset 545 " hexmask.long.byte 0x00 0.--7. 1. " INTID544 ,Interrupt ID544 Priority/Priority Byte Offset 544 " group.long 0x624++0x03 line.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137" hexmask.long.byte 0x00 24.--31. 1. " INTID551 ,Interrupt ID551 Priority/Priority Byte Offset 551 " hexmask.long.byte 0x00 16.--23. 1. " INTID550 ,Interrupt ID550 Priority/Priority Byte Offset 550 " hexmask.long.byte 0x00 8.--15. 1. " INTID549 ,Interrupt ID549 Priority/Priority Byte Offset 549 " hexmask.long.byte 0x00 0.--7. 1. " INTID548 ,Interrupt ID548 Priority/Priority Byte Offset 548 " group.long 0x628++0x03 line.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138" hexmask.long.byte 0x00 24.--31. 1. " INTID555 ,Interrupt ID555 Priority/Priority Byte Offset 555 " hexmask.long.byte 0x00 16.--23. 1. " INTID554 ,Interrupt ID554 Priority/Priority Byte Offset 554 " hexmask.long.byte 0x00 8.--15. 1. " INTID553 ,Interrupt ID553 Priority/Priority Byte Offset 553 " hexmask.long.byte 0x00 0.--7. 1. " INTID552 ,Interrupt ID552 Priority/Priority Byte Offset 552 " group.long 0x62C++0x03 line.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139" hexmask.long.byte 0x00 24.--31. 1. " INTID559 ,Interrupt ID559 Priority/Priority Byte Offset 559 " hexmask.long.byte 0x00 16.--23. 1. " INTID558 ,Interrupt ID558 Priority/Priority Byte Offset 558 " hexmask.long.byte 0x00 8.--15. 1. " INTID557 ,Interrupt ID557 Priority/Priority Byte Offset 557 " hexmask.long.byte 0x00 0.--7. 1. " INTID556 ,Interrupt ID556 Priority/Priority Byte Offset 556 " group.long 0x630++0x03 line.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140" hexmask.long.byte 0x00 24.--31. 1. " INTID563 ,Interrupt ID563 Priority/Priority Byte Offset 563 " hexmask.long.byte 0x00 16.--23. 1. " INTID562 ,Interrupt ID562 Priority/Priority Byte Offset 562 " hexmask.long.byte 0x00 8.--15. 1. " INTID561 ,Interrupt ID561 Priority/Priority Byte Offset 561 " hexmask.long.byte 0x00 0.--7. 1. " INTID560 ,Interrupt ID560 Priority/Priority Byte Offset 560 " group.long 0x634++0x03 line.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141" hexmask.long.byte 0x00 24.--31. 1. " INTID567 ,Interrupt ID567 Priority/Priority Byte Offset 567 " hexmask.long.byte 0x00 16.--23. 1. " INTID566 ,Interrupt ID566 Priority/Priority Byte Offset 566 " hexmask.long.byte 0x00 8.--15. 1. " INTID565 ,Interrupt ID565 Priority/Priority Byte Offset 565 " hexmask.long.byte 0x00 0.--7. 1. " INTID564 ,Interrupt ID564 Priority/Priority Byte Offset 564 " group.long 0x638++0x03 line.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142" hexmask.long.byte 0x00 24.--31. 1. " INTID571 ,Interrupt ID571 Priority/Priority Byte Offset 571 " hexmask.long.byte 0x00 16.--23. 1. " INTID570 ,Interrupt ID570 Priority/Priority Byte Offset 570 " hexmask.long.byte 0x00 8.--15. 1. " INTID569 ,Interrupt ID569 Priority/Priority Byte Offset 569 " hexmask.long.byte 0x00 0.--7. 1. " INTID568 ,Interrupt ID568 Priority/Priority Byte Offset 568 " group.long 0x63C++0x03 line.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143" hexmask.long.byte 0x00 24.--31. 1. " INTID575 ,Interrupt ID575 Priority/Priority Byte Offset 575 " hexmask.long.byte 0x00 16.--23. 1. " INTID574 ,Interrupt ID574 Priority/Priority Byte Offset 574 " hexmask.long.byte 0x00 8.--15. 1. " INTID573 ,Interrupt ID573 Priority/Priority Byte Offset 573 " hexmask.long.byte 0x00 0.--7. 1. " INTID572 ,Interrupt ID572 Priority/Priority Byte Offset 572 " else hgroup.long 0x620++0x03 hide.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136" hgroup.long 0x624++0x03 hide.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137" hgroup.long 0x628++0x03 hide.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138" hgroup.long 0x62C++0x03 hide.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139" hgroup.long 0x630++0x03 hide.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140" hgroup.long 0x634++0x03 hide.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141" hgroup.long 0x638++0x03 hide.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142" hgroup.long 0x63C++0x03 hide.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x12) group.long 0x640++0x03 line.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144" hexmask.long.byte 0x00 24.--31. 1. " INTID579 ,Interrupt ID579 Priority/Priority Byte Offset 579 " hexmask.long.byte 0x00 16.--23. 1. " INTID578 ,Interrupt ID578 Priority/Priority Byte Offset 578 " hexmask.long.byte 0x00 8.--15. 1. " INTID577 ,Interrupt ID577 Priority/Priority Byte Offset 577 " hexmask.long.byte 0x00 0.--7. 1. " INTID576 ,Interrupt ID576 Priority/Priority Byte Offset 576 " group.long 0x644++0x03 line.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145" hexmask.long.byte 0x00 24.--31. 1. " INTID583 ,Interrupt ID583 Priority/Priority Byte Offset 583 " hexmask.long.byte 0x00 16.--23. 1. " INTID582 ,Interrupt ID582 Priority/Priority Byte Offset 582 " hexmask.long.byte 0x00 8.--15. 1. " INTID581 ,Interrupt ID581 Priority/Priority Byte Offset 581 " hexmask.long.byte 0x00 0.--7. 1. " INTID580 ,Interrupt ID580 Priority/Priority Byte Offset 580 " group.long 0x648++0x03 line.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146" hexmask.long.byte 0x00 24.--31. 1. " INTID587 ,Interrupt ID587 Priority/Priority Byte Offset 587 " hexmask.long.byte 0x00 16.--23. 1. " INTID586 ,Interrupt ID586 Priority/Priority Byte Offset 586 " hexmask.long.byte 0x00 8.--15. 1. " INTID585 ,Interrupt ID585 Priority/Priority Byte Offset 585 " hexmask.long.byte 0x00 0.--7. 1. " INTID584 ,Interrupt ID584 Priority/Priority Byte Offset 584 " group.long 0x64C++0x03 line.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147" hexmask.long.byte 0x00 24.--31. 1. " INTID591 ,Interrupt ID591 Priority/Priority Byte Offset 591 " hexmask.long.byte 0x00 16.--23. 1. " INTID590 ,Interrupt ID590 Priority/Priority Byte Offset 590 " hexmask.long.byte 0x00 8.--15. 1. " INTID589 ,Interrupt ID589 Priority/Priority Byte Offset 589 " hexmask.long.byte 0x00 0.--7. 1. " INTID588 ,Interrupt ID588 Priority/Priority Byte Offset 588 " group.long 0x650++0x03 line.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148" hexmask.long.byte 0x00 24.--31. 1. " INTID595 ,Interrupt ID595 Priority/Priority Byte Offset 595 " hexmask.long.byte 0x00 16.--23. 1. " INTID594 ,Interrupt ID594 Priority/Priority Byte Offset 594 " hexmask.long.byte 0x00 8.--15. 1. " INTID593 ,Interrupt ID593 Priority/Priority Byte Offset 593 " hexmask.long.byte 0x00 0.--7. 1. " INTID592 ,Interrupt ID592 Priority/Priority Byte Offset 592 " group.long 0x654++0x03 line.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149" hexmask.long.byte 0x00 24.--31. 1. " INTID599 ,Interrupt ID599 Priority/Priority Byte Offset 599 " hexmask.long.byte 0x00 16.--23. 1. " INTID598 ,Interrupt ID598 Priority/Priority Byte Offset 598 " hexmask.long.byte 0x00 8.--15. 1. " INTID597 ,Interrupt ID597 Priority/Priority Byte Offset 597 " hexmask.long.byte 0x00 0.--7. 1. " INTID596 ,Interrupt ID596 Priority/Priority Byte Offset 596 " group.long 0x658++0x03 line.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150" hexmask.long.byte 0x00 24.--31. 1. " INTID603 ,Interrupt ID603 Priority/Priority Byte Offset 603 " hexmask.long.byte 0x00 16.--23. 1. " INTID602 ,Interrupt ID602 Priority/Priority Byte Offset 602 " hexmask.long.byte 0x00 8.--15. 1. " INTID601 ,Interrupt ID601 Priority/Priority Byte Offset 601 " hexmask.long.byte 0x00 0.--7. 1. " INTID600 ,Interrupt ID600 Priority/Priority Byte Offset 600 " group.long 0x65C++0x03 line.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151" hexmask.long.byte 0x00 24.--31. 1. " INTID607 ,Interrupt ID607 Priority/Priority Byte Offset 607 " hexmask.long.byte 0x00 16.--23. 1. " INTID606 ,Interrupt ID606 Priority/Priority Byte Offset 606 " hexmask.long.byte 0x00 8.--15. 1. " INTID605 ,Interrupt ID605 Priority/Priority Byte Offset 605 " hexmask.long.byte 0x00 0.--7. 1. " INTID604 ,Interrupt ID604 Priority/Priority Byte Offset 604 " else hgroup.long 0x640++0x03 hide.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144" hgroup.long 0x644++0x03 hide.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145" hgroup.long 0x648++0x03 hide.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146" hgroup.long 0x64C++0x03 hide.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147" hgroup.long 0x650++0x03 hide.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148" hgroup.long 0x654++0x03 hide.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149" hgroup.long 0x658++0x03 hide.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150" hgroup.long 0x65C++0x03 hide.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x13) group.long 0x660++0x03 line.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152" hexmask.long.byte 0x00 24.--31. 1. " INTID611 ,Interrupt ID611 Priority/Priority Byte Offset 611 " hexmask.long.byte 0x00 16.--23. 1. " INTID610 ,Interrupt ID610 Priority/Priority Byte Offset 610 " hexmask.long.byte 0x00 8.--15. 1. " INTID609 ,Interrupt ID609 Priority/Priority Byte Offset 609 " hexmask.long.byte 0x00 0.--7. 1. " INTID608 ,Interrupt ID608 Priority/Priority Byte Offset 608 " group.long 0x664++0x03 line.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153" hexmask.long.byte 0x00 24.--31. 1. " INTID615 ,Interrupt ID615 Priority/Priority Byte Offset 615 " hexmask.long.byte 0x00 16.--23. 1. " INTID614 ,Interrupt ID614 Priority/Priority Byte Offset 614 " hexmask.long.byte 0x00 8.--15. 1. " INTID613 ,Interrupt ID613 Priority/Priority Byte Offset 613 " hexmask.long.byte 0x00 0.--7. 1. " INTID612 ,Interrupt ID612 Priority/Priority Byte Offset 612 " group.long 0x668++0x03 line.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154" hexmask.long.byte 0x00 24.--31. 1. " INTID619 ,Interrupt ID619 Priority/Priority Byte Offset 619 " hexmask.long.byte 0x00 16.--23. 1. " INTID618 ,Interrupt ID618 Priority/Priority Byte Offset 618 " hexmask.long.byte 0x00 8.--15. 1. " INTID617 ,Interrupt ID617 Priority/Priority Byte Offset 617 " hexmask.long.byte 0x00 0.--7. 1. " INTID616 ,Interrupt ID616 Priority/Priority Byte Offset 616 " group.long 0x66C++0x03 line.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155" hexmask.long.byte 0x00 24.--31. 1. " INTID623 ,Interrupt ID623 Priority/Priority Byte Offset 623 " hexmask.long.byte 0x00 16.--23. 1. " INTID622 ,Interrupt ID622 Priority/Priority Byte Offset 622 " hexmask.long.byte 0x00 8.--15. 1. " INTID621 ,Interrupt ID621 Priority/Priority Byte Offset 621 " hexmask.long.byte 0x00 0.--7. 1. " INTID620 ,Interrupt ID620 Priority/Priority Byte Offset 620 " group.long 0x670++0x03 line.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156" hexmask.long.byte 0x00 24.--31. 1. " INTID627 ,Interrupt ID627 Priority/Priority Byte Offset 627 " hexmask.long.byte 0x00 16.--23. 1. " INTID626 ,Interrupt ID626 Priority/Priority Byte Offset 626 " hexmask.long.byte 0x00 8.--15. 1. " INTID625 ,Interrupt ID625 Priority/Priority Byte Offset 625 " hexmask.long.byte 0x00 0.--7. 1. " INTID624 ,Interrupt ID624 Priority/Priority Byte Offset 624 " group.long 0x674++0x03 line.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157" hexmask.long.byte 0x00 24.--31. 1. " INTID631 ,Interrupt ID631 Priority/Priority Byte Offset 631 " hexmask.long.byte 0x00 16.--23. 1. " INTID630 ,Interrupt ID630 Priority/Priority Byte Offset 630 " hexmask.long.byte 0x00 8.--15. 1. " INTID629 ,Interrupt ID629 Priority/Priority Byte Offset 629 " hexmask.long.byte 0x00 0.--7. 1. " INTID628 ,Interrupt ID628 Priority/Priority Byte Offset 628 " group.long 0x678++0x03 line.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158" hexmask.long.byte 0x00 24.--31. 1. " INTID635 ,Interrupt ID635 Priority/Priority Byte Offset 635 " hexmask.long.byte 0x00 16.--23. 1. " INTID634 ,Interrupt ID634 Priority/Priority Byte Offset 634 " hexmask.long.byte 0x00 8.--15. 1. " INTID633 ,Interrupt ID633 Priority/Priority Byte Offset 633 " hexmask.long.byte 0x00 0.--7. 1. " INTID632 ,Interrupt ID632 Priority/Priority Byte Offset 632 " group.long 0x67C++0x03 line.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159" hexmask.long.byte 0x00 24.--31. 1. " INTID639 ,Interrupt ID639 Priority/Priority Byte Offset 639 " hexmask.long.byte 0x00 16.--23. 1. " INTID638 ,Interrupt ID638 Priority/Priority Byte Offset 638 " hexmask.long.byte 0x00 8.--15. 1. " INTID637 ,Interrupt ID637 Priority/Priority Byte Offset 637 " hexmask.long.byte 0x00 0.--7. 1. " INTID636 ,Interrupt ID636 Priority/Priority Byte Offset 636 " else hgroup.long 0x660++0x03 hide.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152" hgroup.long 0x664++0x03 hide.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153" hgroup.long 0x668++0x03 hide.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154" hgroup.long 0x66C++0x03 hide.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155" hgroup.long 0x670++0x03 hide.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156" hgroup.long 0x674++0x03 hide.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157" hgroup.long 0x678++0x03 hide.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158" hgroup.long 0x67C++0x03 hide.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x14) group.long 0x680++0x03 line.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160" hexmask.long.byte 0x00 24.--31. 1. " INTID643 ,Interrupt ID643 Priority/Priority Byte Offset 643 " hexmask.long.byte 0x00 16.--23. 1. " INTID642 ,Interrupt ID642 Priority/Priority Byte Offset 642 " hexmask.long.byte 0x00 8.--15. 1. " INTID641 ,Interrupt ID641 Priority/Priority Byte Offset 641 " hexmask.long.byte 0x00 0.--7. 1. " INTID640 ,Interrupt ID640 Priority/Priority Byte Offset 640 " group.long 0x684++0x03 line.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161" hexmask.long.byte 0x00 24.--31. 1. " INTID647 ,Interrupt ID647 Priority/Priority Byte Offset 647 " hexmask.long.byte 0x00 16.--23. 1. " INTID646 ,Interrupt ID646 Priority/Priority Byte Offset 646 " hexmask.long.byte 0x00 8.--15. 1. " INTID645 ,Interrupt ID645 Priority/Priority Byte Offset 645 " hexmask.long.byte 0x00 0.--7. 1. " INTID644 ,Interrupt ID644 Priority/Priority Byte Offset 644 " group.long 0x688++0x03 line.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162" hexmask.long.byte 0x00 24.--31. 1. " INTID651 ,Interrupt ID651 Priority/Priority Byte Offset 651 " hexmask.long.byte 0x00 16.--23. 1. " INTID650 ,Interrupt ID650 Priority/Priority Byte Offset 650 " hexmask.long.byte 0x00 8.--15. 1. " INTID649 ,Interrupt ID649 Priority/Priority Byte Offset 649 " hexmask.long.byte 0x00 0.--7. 1. " INTID648 ,Interrupt ID648 Priority/Priority Byte Offset 648 " group.long 0x68C++0x03 line.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163" hexmask.long.byte 0x00 24.--31. 1. " INTID655 ,Interrupt ID655 Priority/Priority Byte Offset 655 " hexmask.long.byte 0x00 16.--23. 1. " INTID654 ,Interrupt ID654 Priority/Priority Byte Offset 654 " hexmask.long.byte 0x00 8.--15. 1. " INTID653 ,Interrupt ID653 Priority/Priority Byte Offset 653 " hexmask.long.byte 0x00 0.--7. 1. " INTID652 ,Interrupt ID652 Priority/Priority Byte Offset 652 " group.long 0x690++0x03 line.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164" hexmask.long.byte 0x00 24.--31. 1. " INTID659 ,Interrupt ID659 Priority/Priority Byte Offset 659 " hexmask.long.byte 0x00 16.--23. 1. " INTID658 ,Interrupt ID658 Priority/Priority Byte Offset 658 " hexmask.long.byte 0x00 8.--15. 1. " INTID657 ,Interrupt ID657 Priority/Priority Byte Offset 657 " hexmask.long.byte 0x00 0.--7. 1. " INTID656 ,Interrupt ID656 Priority/Priority Byte Offset 656 " group.long 0x694++0x03 line.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165" hexmask.long.byte 0x00 24.--31. 1. " INTID663 ,Interrupt ID663 Priority/Priority Byte Offset 663 " hexmask.long.byte 0x00 16.--23. 1. " INTID662 ,Interrupt ID662 Priority/Priority Byte Offset 662 " hexmask.long.byte 0x00 8.--15. 1. " INTID661 ,Interrupt ID661 Priority/Priority Byte Offset 661 " hexmask.long.byte 0x00 0.--7. 1. " INTID660 ,Interrupt ID660 Priority/Priority Byte Offset 660 " group.long 0x698++0x03 line.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166" hexmask.long.byte 0x00 24.--31. 1. " INTID667 ,Interrupt ID667 Priority/Priority Byte Offset 667 " hexmask.long.byte 0x00 16.--23. 1. " INTID666 ,Interrupt ID666 Priority/Priority Byte Offset 666 " hexmask.long.byte 0x00 8.--15. 1. " INTID665 ,Interrupt ID665 Priority/Priority Byte Offset 665 " hexmask.long.byte 0x00 0.--7. 1. " INTID664 ,Interrupt ID664 Priority/Priority Byte Offset 664 " group.long 0x69C++0x03 line.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167" hexmask.long.byte 0x00 24.--31. 1. " INTID671 ,Interrupt ID671 Priority/Priority Byte Offset 671 " hexmask.long.byte 0x00 16.--23. 1. " INTID670 ,Interrupt ID670 Priority/Priority Byte Offset 670 " hexmask.long.byte 0x00 8.--15. 1. " INTID669 ,Interrupt ID669 Priority/Priority Byte Offset 669 " hexmask.long.byte 0x00 0.--7. 1. " INTID668 ,Interrupt ID668 Priority/Priority Byte Offset 668 " else hgroup.long 0x680++0x03 hide.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160" hgroup.long 0x684++0x03 hide.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161" hgroup.long 0x688++0x03 hide.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162" hgroup.long 0x68C++0x03 hide.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163" hgroup.long 0x690++0x03 hide.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164" hgroup.long 0x694++0x03 hide.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165" hgroup.long 0x698++0x03 hide.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166" hgroup.long 0x69C++0x03 hide.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x15) group.long 0x6A0++0x03 line.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168" hexmask.long.byte 0x00 24.--31. 1. " INTID675 ,Interrupt ID675 Priority/Priority Byte Offset 675 " hexmask.long.byte 0x00 16.--23. 1. " INTID674 ,Interrupt ID674 Priority/Priority Byte Offset 674 " hexmask.long.byte 0x00 8.--15. 1. " INTID673 ,Interrupt ID673 Priority/Priority Byte Offset 673 " hexmask.long.byte 0x00 0.--7. 1. " INTID672 ,Interrupt ID672 Priority/Priority Byte Offset 672 " group.long 0x6A4++0x03 line.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169" hexmask.long.byte 0x00 24.--31. 1. " INTID679 ,Interrupt ID679 Priority/Priority Byte Offset 679 " hexmask.long.byte 0x00 16.--23. 1. " INTID678 ,Interrupt ID678 Priority/Priority Byte Offset 678 " hexmask.long.byte 0x00 8.--15. 1. " INTID677 ,Interrupt ID677 Priority/Priority Byte Offset 677 " hexmask.long.byte 0x00 0.--7. 1. " INTID676 ,Interrupt ID676 Priority/Priority Byte Offset 676 " group.long 0x6A8++0x03 line.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170" hexmask.long.byte 0x00 24.--31. 1. " INTID683 ,Interrupt ID683 Priority/Priority Byte Offset 683 " hexmask.long.byte 0x00 16.--23. 1. " INTID682 ,Interrupt ID682 Priority/Priority Byte Offset 682 " hexmask.long.byte 0x00 8.--15. 1. " INTID681 ,Interrupt ID681 Priority/Priority Byte Offset 681 " hexmask.long.byte 0x00 0.--7. 1. " INTID680 ,Interrupt ID680 Priority/Priority Byte Offset 680 " group.long 0x6AC++0x03 line.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171" hexmask.long.byte 0x00 24.--31. 1. " INTID687 ,Interrupt ID687 Priority/Priority Byte Offset 687 " hexmask.long.byte 0x00 16.--23. 1. " INTID686 ,Interrupt ID686 Priority/Priority Byte Offset 686 " hexmask.long.byte 0x00 8.--15. 1. " INTID685 ,Interrupt ID685 Priority/Priority Byte Offset 685 " hexmask.long.byte 0x00 0.--7. 1. " INTID684 ,Interrupt ID684 Priority/Priority Byte Offset 684 " group.long 0x6B0++0x03 line.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172" hexmask.long.byte 0x00 24.--31. 1. " INTID691 ,Interrupt ID691 Priority/Priority Byte Offset 691 " hexmask.long.byte 0x00 16.--23. 1. " INTID690 ,Interrupt ID690 Priority/Priority Byte Offset 690 " hexmask.long.byte 0x00 8.--15. 1. " INTID689 ,Interrupt ID689 Priority/Priority Byte Offset 689 " hexmask.long.byte 0x00 0.--7. 1. " INTID688 ,Interrupt ID688 Priority/Priority Byte Offset 688 " group.long 0x6B4++0x03 line.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173" hexmask.long.byte 0x00 24.--31. 1. " INTID695 ,Interrupt ID695 Priority/Priority Byte Offset 695 " hexmask.long.byte 0x00 16.--23. 1. " INTID694 ,Interrupt ID694 Priority/Priority Byte Offset 694 " hexmask.long.byte 0x00 8.--15. 1. " INTID693 ,Interrupt ID693 Priority/Priority Byte Offset 693 " hexmask.long.byte 0x00 0.--7. 1. " INTID692 ,Interrupt ID692 Priority/Priority Byte Offset 692 " group.long 0x6B8++0x03 line.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174" hexmask.long.byte 0x00 24.--31. 1. " INTID699 ,Interrupt ID699 Priority/Priority Byte Offset 699 " hexmask.long.byte 0x00 16.--23. 1. " INTID698 ,Interrupt ID698 Priority/Priority Byte Offset 698 " hexmask.long.byte 0x00 8.--15. 1. " INTID697 ,Interrupt ID697 Priority/Priority Byte Offset 697 " hexmask.long.byte 0x00 0.--7. 1. " INTID696 ,Interrupt ID696 Priority/Priority Byte Offset 696 " group.long 0x6BC++0x03 line.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175" hexmask.long.byte 0x00 24.--31. 1. " INTID703 ,Interrupt ID703 Priority/Priority Byte Offset 703 " hexmask.long.byte 0x00 16.--23. 1. " INTID702 ,Interrupt ID702 Priority/Priority Byte Offset 702 " hexmask.long.byte 0x00 8.--15. 1. " INTID701 ,Interrupt ID701 Priority/Priority Byte Offset 701 " hexmask.long.byte 0x00 0.--7. 1. " INTID700 ,Interrupt ID700 Priority/Priority Byte Offset 700 " else hgroup.long 0x6A0++0x03 hide.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168" hgroup.long 0x6A4++0x03 hide.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169" hgroup.long 0x6A8++0x03 hide.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170" hgroup.long 0x6AC++0x03 hide.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171" hgroup.long 0x6B0++0x03 hide.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172" hgroup.long 0x6B4++0x03 hide.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173" hgroup.long 0x6B8++0x03 hide.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174" hgroup.long 0x6BC++0x03 hide.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x16) group.long 0x6C0++0x03 line.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176" hexmask.long.byte 0x00 24.--31. 1. " INTID707 ,Interrupt ID707 Priority/Priority Byte Offset 707 " hexmask.long.byte 0x00 16.--23. 1. " INTID706 ,Interrupt ID706 Priority/Priority Byte Offset 706 " hexmask.long.byte 0x00 8.--15. 1. " INTID705 ,Interrupt ID705 Priority/Priority Byte Offset 705 " hexmask.long.byte 0x00 0.--7. 1. " INTID704 ,Interrupt ID704 Priority/Priority Byte Offset 704 " group.long 0x6C4++0x03 line.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177" hexmask.long.byte 0x00 24.--31. 1. " INTID711 ,Interrupt ID711 Priority/Priority Byte Offset 711 " hexmask.long.byte 0x00 16.--23. 1. " INTID710 ,Interrupt ID710 Priority/Priority Byte Offset 710 " hexmask.long.byte 0x00 8.--15. 1. " INTID709 ,Interrupt ID709 Priority/Priority Byte Offset 709 " hexmask.long.byte 0x00 0.--7. 1. " INTID708 ,Interrupt ID708 Priority/Priority Byte Offset 708 " group.long 0x6C8++0x03 line.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178" hexmask.long.byte 0x00 24.--31. 1. " INTID715 ,Interrupt ID715 Priority/Priority Byte Offset 715 " hexmask.long.byte 0x00 16.--23. 1. " INTID714 ,Interrupt ID714 Priority/Priority Byte Offset 714 " hexmask.long.byte 0x00 8.--15. 1. " INTID713 ,Interrupt ID713 Priority/Priority Byte Offset 713 " hexmask.long.byte 0x00 0.--7. 1. " INTID712 ,Interrupt ID712 Priority/Priority Byte Offset 712 " group.long 0x6CC++0x03 line.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179" hexmask.long.byte 0x00 24.--31. 1. " INTID719 ,Interrupt ID719 Priority/Priority Byte Offset 719 " hexmask.long.byte 0x00 16.--23. 1. " INTID718 ,Interrupt ID718 Priority/Priority Byte Offset 718 " hexmask.long.byte 0x00 8.--15. 1. " INTID717 ,Interrupt ID717 Priority/Priority Byte Offset 717 " hexmask.long.byte 0x00 0.--7. 1. " INTID716 ,Interrupt ID716 Priority/Priority Byte Offset 716 " group.long 0x6D0++0x03 line.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180" hexmask.long.byte 0x00 24.--31. 1. " INTID723 ,Interrupt ID723 Priority/Priority Byte Offset 723 " hexmask.long.byte 0x00 16.--23. 1. " INTID722 ,Interrupt ID722 Priority/Priority Byte Offset 722 " hexmask.long.byte 0x00 8.--15. 1. " INTID721 ,Interrupt ID721 Priority/Priority Byte Offset 721 " hexmask.long.byte 0x00 0.--7. 1. " INTID720 ,Interrupt ID720 Priority/Priority Byte Offset 720 " group.long 0x6D4++0x03 line.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181" hexmask.long.byte 0x00 24.--31. 1. " INTID727 ,Interrupt ID727 Priority/Priority Byte Offset 727 " hexmask.long.byte 0x00 16.--23. 1. " INTID726 ,Interrupt ID726 Priority/Priority Byte Offset 726 " hexmask.long.byte 0x00 8.--15. 1. " INTID725 ,Interrupt ID725 Priority/Priority Byte Offset 725 " hexmask.long.byte 0x00 0.--7. 1. " INTID724 ,Interrupt ID724 Priority/Priority Byte Offset 724 " group.long 0x6D8++0x03 line.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182" hexmask.long.byte 0x00 24.--31. 1. " INTID731 ,Interrupt ID731 Priority/Priority Byte Offset 731 " hexmask.long.byte 0x00 16.--23. 1. " INTID730 ,Interrupt ID730 Priority/Priority Byte Offset 730 " hexmask.long.byte 0x00 8.--15. 1. " INTID729 ,Interrupt ID729 Priority/Priority Byte Offset 729 " hexmask.long.byte 0x00 0.--7. 1. " INTID728 ,Interrupt ID728 Priority/Priority Byte Offset 728 " group.long 0x6DC++0x03 line.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183" hexmask.long.byte 0x00 24.--31. 1. " INTID735 ,Interrupt ID735 Priority/Priority Byte Offset 735 " hexmask.long.byte 0x00 16.--23. 1. " INTID734 ,Interrupt ID734 Priority/Priority Byte Offset 734 " hexmask.long.byte 0x00 8.--15. 1. " INTID733 ,Interrupt ID733 Priority/Priority Byte Offset 733 " hexmask.long.byte 0x00 0.--7. 1. " INTID732 ,Interrupt ID732 Priority/Priority Byte Offset 732 " else hgroup.long 0x6C0++0x03 hide.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176" hgroup.long 0x6C4++0x03 hide.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177" hgroup.long 0x6C8++0x03 hide.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178" hgroup.long 0x6CC++0x03 hide.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179" hgroup.long 0x6D0++0x03 hide.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180" hgroup.long 0x6D4++0x03 hide.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181" hgroup.long 0x6D8++0x03 hide.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182" hgroup.long 0x6DC++0x03 hide.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x17) group.long 0x6E0++0x03 line.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184" hexmask.long.byte 0x00 24.--31. 1. " INTID739 ,Interrupt ID739 Priority/Priority Byte Offset 739 " hexmask.long.byte 0x00 16.--23. 1. " INTID738 ,Interrupt ID738 Priority/Priority Byte Offset 738 " hexmask.long.byte 0x00 8.--15. 1. " INTID737 ,Interrupt ID737 Priority/Priority Byte Offset 737 " hexmask.long.byte 0x00 0.--7. 1. " INTID736 ,Interrupt ID736 Priority/Priority Byte Offset 736 " group.long 0x6E4++0x03 line.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185" hexmask.long.byte 0x00 24.--31. 1. " INTID743 ,Interrupt ID743 Priority/Priority Byte Offset 743 " hexmask.long.byte 0x00 16.--23. 1. " INTID742 ,Interrupt ID742 Priority/Priority Byte Offset 742 " hexmask.long.byte 0x00 8.--15. 1. " INTID741 ,Interrupt ID741 Priority/Priority Byte Offset 741 " hexmask.long.byte 0x00 0.--7. 1. " INTID740 ,Interrupt ID740 Priority/Priority Byte Offset 740 " group.long 0x6E8++0x03 line.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186" hexmask.long.byte 0x00 24.--31. 1. " INTID747 ,Interrupt ID747 Priority/Priority Byte Offset 747 " hexmask.long.byte 0x00 16.--23. 1. " INTID746 ,Interrupt ID746 Priority/Priority Byte Offset 746 " hexmask.long.byte 0x00 8.--15. 1. " INTID745 ,Interrupt ID745 Priority/Priority Byte Offset 745 " hexmask.long.byte 0x00 0.--7. 1. " INTID744 ,Interrupt ID744 Priority/Priority Byte Offset 744 " group.long 0x6EC++0x03 line.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187" hexmask.long.byte 0x00 24.--31. 1. " INTID751 ,Interrupt ID751 Priority/Priority Byte Offset 751 " hexmask.long.byte 0x00 16.--23. 1. " INTID750 ,Interrupt ID750 Priority/Priority Byte Offset 750 " hexmask.long.byte 0x00 8.--15. 1. " INTID749 ,Interrupt ID749 Priority/Priority Byte Offset 749 " hexmask.long.byte 0x00 0.--7. 1. " INTID748 ,Interrupt ID748 Priority/Priority Byte Offset 748 " group.long 0x6F0++0x03 line.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188" hexmask.long.byte 0x00 24.--31. 1. " INTID755 ,Interrupt ID755 Priority/Priority Byte Offset 755 " hexmask.long.byte 0x00 16.--23. 1. " INTID754 ,Interrupt ID754 Priority/Priority Byte Offset 754 " hexmask.long.byte 0x00 8.--15. 1. " INTID753 ,Interrupt ID753 Priority/Priority Byte Offset 753 " hexmask.long.byte 0x00 0.--7. 1. " INTID752 ,Interrupt ID752 Priority/Priority Byte Offset 752 " group.long 0x6F4++0x03 line.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189" hexmask.long.byte 0x00 24.--31. 1. " INTID759 ,Interrupt ID759 Priority/Priority Byte Offset 759 " hexmask.long.byte 0x00 16.--23. 1. " INTID758 ,Interrupt ID758 Priority/Priority Byte Offset 758 " hexmask.long.byte 0x00 8.--15. 1. " INTID757 ,Interrupt ID757 Priority/Priority Byte Offset 757 " hexmask.long.byte 0x00 0.--7. 1. " INTID756 ,Interrupt ID756 Priority/Priority Byte Offset 756 " group.long 0x6F8++0x03 line.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190" hexmask.long.byte 0x00 24.--31. 1. " INTID763 ,Interrupt ID763 Priority/Priority Byte Offset 763 " hexmask.long.byte 0x00 16.--23. 1. " INTID762 ,Interrupt ID762 Priority/Priority Byte Offset 762 " hexmask.long.byte 0x00 8.--15. 1. " INTID761 ,Interrupt ID761 Priority/Priority Byte Offset 761 " hexmask.long.byte 0x00 0.--7. 1. " INTID760 ,Interrupt ID760 Priority/Priority Byte Offset 760 " group.long 0x6FC++0x03 line.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191" hexmask.long.byte 0x00 24.--31. 1. " INTID767 ,Interrupt ID767 Priority/Priority Byte Offset 767 " hexmask.long.byte 0x00 16.--23. 1. " INTID766 ,Interrupt ID766 Priority/Priority Byte Offset 766 " hexmask.long.byte 0x00 8.--15. 1. " INTID765 ,Interrupt ID765 Priority/Priority Byte Offset 765 " hexmask.long.byte 0x00 0.--7. 1. " INTID764 ,Interrupt ID764 Priority/Priority Byte Offset 764 " else hgroup.long 0x6E0++0x03 hide.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184" hgroup.long 0x6E4++0x03 hide.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185" hgroup.long 0x6E8++0x03 hide.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186" hgroup.long 0x6EC++0x03 hide.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187" hgroup.long 0x6F0++0x03 hide.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188" hgroup.long 0x6F4++0x03 hide.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189" hgroup.long 0x6F8++0x03 hide.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190" hgroup.long 0x6FC++0x03 hide.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x18) group.long 0x700++0x03 line.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192" hexmask.long.byte 0x00 24.--31. 1. " INTID771 ,Interrupt ID771 Priority/Priority Byte Offset 771 " hexmask.long.byte 0x00 16.--23. 1. " INTID770 ,Interrupt ID770 Priority/Priority Byte Offset 770 " hexmask.long.byte 0x00 8.--15. 1. " INTID769 ,Interrupt ID769 Priority/Priority Byte Offset 769 " hexmask.long.byte 0x00 0.--7. 1. " INTID768 ,Interrupt ID768 Priority/Priority Byte Offset 768 " group.long 0x704++0x03 line.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193" hexmask.long.byte 0x00 24.--31. 1. " INTID775 ,Interrupt ID775 Priority/Priority Byte Offset 775 " hexmask.long.byte 0x00 16.--23. 1. " INTID774 ,Interrupt ID774 Priority/Priority Byte Offset 774 " hexmask.long.byte 0x00 8.--15. 1. " INTID773 ,Interrupt ID773 Priority/Priority Byte Offset 773 " hexmask.long.byte 0x00 0.--7. 1. " INTID772 ,Interrupt ID772 Priority/Priority Byte Offset 772 " group.long 0x708++0x03 line.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194" hexmask.long.byte 0x00 24.--31. 1. " INTID779 ,Interrupt ID779 Priority/Priority Byte Offset 779 " hexmask.long.byte 0x00 16.--23. 1. " INTID778 ,Interrupt ID778 Priority/Priority Byte Offset 778 " hexmask.long.byte 0x00 8.--15. 1. " INTID777 ,Interrupt ID777 Priority/Priority Byte Offset 777 " hexmask.long.byte 0x00 0.--7. 1. " INTID776 ,Interrupt ID776 Priority/Priority Byte Offset 776 " group.long 0x70C++0x03 line.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195" hexmask.long.byte 0x00 24.--31. 1. " INTID783 ,Interrupt ID783 Priority/Priority Byte Offset 783 " hexmask.long.byte 0x00 16.--23. 1. " INTID782 ,Interrupt ID782 Priority/Priority Byte Offset 782 " hexmask.long.byte 0x00 8.--15. 1. " INTID781 ,Interrupt ID781 Priority/Priority Byte Offset 781 " hexmask.long.byte 0x00 0.--7. 1. " INTID780 ,Interrupt ID780 Priority/Priority Byte Offset 780 " group.long 0x710++0x03 line.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196" hexmask.long.byte 0x00 24.--31. 1. " INTID787 ,Interrupt ID787 Priority/Priority Byte Offset 787 " hexmask.long.byte 0x00 16.--23. 1. " INTID786 ,Interrupt ID786 Priority/Priority Byte Offset 786 " hexmask.long.byte 0x00 8.--15. 1. " INTID785 ,Interrupt ID785 Priority/Priority Byte Offset 785 " hexmask.long.byte 0x00 0.--7. 1. " INTID784 ,Interrupt ID784 Priority/Priority Byte Offset 784 " group.long 0x714++0x03 line.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197" hexmask.long.byte 0x00 24.--31. 1. " INTID791 ,Interrupt ID791 Priority/Priority Byte Offset 791 " hexmask.long.byte 0x00 16.--23. 1. " INTID790 ,Interrupt ID790 Priority/Priority Byte Offset 790 " hexmask.long.byte 0x00 8.--15. 1. " INTID789 ,Interrupt ID789 Priority/Priority Byte Offset 789 " hexmask.long.byte 0x00 0.--7. 1. " INTID788 ,Interrupt ID788 Priority/Priority Byte Offset 788 " group.long 0x718++0x03 line.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198" hexmask.long.byte 0x00 24.--31. 1. " INTID795 ,Interrupt ID795 Priority/Priority Byte Offset 795 " hexmask.long.byte 0x00 16.--23. 1. " INTID794 ,Interrupt ID794 Priority/Priority Byte Offset 794 " hexmask.long.byte 0x00 8.--15. 1. " INTID793 ,Interrupt ID793 Priority/Priority Byte Offset 793 " hexmask.long.byte 0x00 0.--7. 1. " INTID792 ,Interrupt ID792 Priority/Priority Byte Offset 792 " group.long 0x71C++0x03 line.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199" hexmask.long.byte 0x00 24.--31. 1. " INTID799 ,Interrupt ID799 Priority/Priority Byte Offset 799 " hexmask.long.byte 0x00 16.--23. 1. " INTID798 ,Interrupt ID798 Priority/Priority Byte Offset 798 " hexmask.long.byte 0x00 8.--15. 1. " INTID797 ,Interrupt ID797 Priority/Priority Byte Offset 797 " hexmask.long.byte 0x00 0.--7. 1. " INTID796 ,Interrupt ID796 Priority/Priority Byte Offset 796 " else hgroup.long 0x700++0x03 hide.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192" hgroup.long 0x704++0x03 hide.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193" hgroup.long 0x708++0x03 hide.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194" hgroup.long 0x70C++0x03 hide.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195" hgroup.long 0x710++0x03 hide.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196" hgroup.long 0x714++0x03 hide.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197" hgroup.long 0x718++0x03 hide.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198" hgroup.long 0x71C++0x03 hide.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x19) group.long 0x720++0x03 line.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200" hexmask.long.byte 0x00 24.--31. 1. " INTID803 ,Interrupt ID803 Priority/Priority Byte Offset 803 " hexmask.long.byte 0x00 16.--23. 1. " INTID802 ,Interrupt ID802 Priority/Priority Byte Offset 802 " hexmask.long.byte 0x00 8.--15. 1. " INTID801 ,Interrupt ID801 Priority/Priority Byte Offset 801 " hexmask.long.byte 0x00 0.--7. 1. " INTID800 ,Interrupt ID800 Priority/Priority Byte Offset 800 " group.long 0x724++0x03 line.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201" hexmask.long.byte 0x00 24.--31. 1. " INTID807 ,Interrupt ID807 Priority/Priority Byte Offset 807 " hexmask.long.byte 0x00 16.--23. 1. " INTID806 ,Interrupt ID806 Priority/Priority Byte Offset 806 " hexmask.long.byte 0x00 8.--15. 1. " INTID805 ,Interrupt ID805 Priority/Priority Byte Offset 805 " hexmask.long.byte 0x00 0.--7. 1. " INTID804 ,Interrupt ID804 Priority/Priority Byte Offset 804 " group.long 0x728++0x03 line.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202" hexmask.long.byte 0x00 24.--31. 1. " INTID811 ,Interrupt ID811 Priority/Priority Byte Offset 811 " hexmask.long.byte 0x00 16.--23. 1. " INTID810 ,Interrupt ID810 Priority/Priority Byte Offset 810 " hexmask.long.byte 0x00 8.--15. 1. " INTID809 ,Interrupt ID809 Priority/Priority Byte Offset 809 " hexmask.long.byte 0x00 0.--7. 1. " INTID808 ,Interrupt ID808 Priority/Priority Byte Offset 808 " group.long 0x72C++0x03 line.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203" hexmask.long.byte 0x00 24.--31. 1. " INTID815 ,Interrupt ID815 Priority/Priority Byte Offset 815 " hexmask.long.byte 0x00 16.--23. 1. " INTID814 ,Interrupt ID814 Priority/Priority Byte Offset 814 " hexmask.long.byte 0x00 8.--15. 1. " INTID813 ,Interrupt ID813 Priority/Priority Byte Offset 813 " hexmask.long.byte 0x00 0.--7. 1. " INTID812 ,Interrupt ID812 Priority/Priority Byte Offset 812 " group.long 0x730++0x03 line.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204" hexmask.long.byte 0x00 24.--31. 1. " INTID819 ,Interrupt ID819 Priority/Priority Byte Offset 819 " hexmask.long.byte 0x00 16.--23. 1. " INTID818 ,Interrupt ID818 Priority/Priority Byte Offset 818 " hexmask.long.byte 0x00 8.--15. 1. " INTID817 ,Interrupt ID817 Priority/Priority Byte Offset 817 " hexmask.long.byte 0x00 0.--7. 1. " INTID816 ,Interrupt ID816 Priority/Priority Byte Offset 816 " group.long 0x734++0x03 line.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205" hexmask.long.byte 0x00 24.--31. 1. " INTID823 ,Interrupt ID823 Priority/Priority Byte Offset 823 " hexmask.long.byte 0x00 16.--23. 1. " INTID822 ,Interrupt ID822 Priority/Priority Byte Offset 822 " hexmask.long.byte 0x00 8.--15. 1. " INTID821 ,Interrupt ID821 Priority/Priority Byte Offset 821 " hexmask.long.byte 0x00 0.--7. 1. " INTID820 ,Interrupt ID820 Priority/Priority Byte Offset 820 " group.long 0x738++0x03 line.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206" hexmask.long.byte 0x00 24.--31. 1. " INTID827 ,Interrupt ID827 Priority/Priority Byte Offset 827 " hexmask.long.byte 0x00 16.--23. 1. " INTID826 ,Interrupt ID826 Priority/Priority Byte Offset 826 " hexmask.long.byte 0x00 8.--15. 1. " INTID825 ,Interrupt ID825 Priority/Priority Byte Offset 825 " hexmask.long.byte 0x00 0.--7. 1. " INTID824 ,Interrupt ID824 Priority/Priority Byte Offset 824 " group.long 0x73C++0x03 line.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207" hexmask.long.byte 0x00 24.--31. 1. " INTID831 ,Interrupt ID831 Priority/Priority Byte Offset 831 " hexmask.long.byte 0x00 16.--23. 1. " INTID830 ,Interrupt ID830 Priority/Priority Byte Offset 830 " hexmask.long.byte 0x00 8.--15. 1. " INTID829 ,Interrupt ID829 Priority/Priority Byte Offset 829 " hexmask.long.byte 0x00 0.--7. 1. " INTID828 ,Interrupt ID828 Priority/Priority Byte Offset 828 " else hgroup.long 0x720++0x03 hide.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200" hgroup.long 0x724++0x03 hide.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201" hgroup.long 0x728++0x03 hide.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202" hgroup.long 0x72C++0x03 hide.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203" hgroup.long 0x730++0x03 hide.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204" hgroup.long 0x734++0x03 hide.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205" hgroup.long 0x738++0x03 hide.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206" hgroup.long 0x73C++0x03 hide.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1A) group.long 0x740++0x03 line.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208" hexmask.long.byte 0x00 24.--31. 1. " INTID835 ,Interrupt ID835 Priority/Priority Byte Offset 835 " hexmask.long.byte 0x00 16.--23. 1. " INTID834 ,Interrupt ID834 Priority/Priority Byte Offset 834 " hexmask.long.byte 0x00 8.--15. 1. " INTID833 ,Interrupt ID833 Priority/Priority Byte Offset 833 " hexmask.long.byte 0x00 0.--7. 1. " INTID832 ,Interrupt ID832 Priority/Priority Byte Offset 832 " group.long 0x744++0x03 line.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209" hexmask.long.byte 0x00 24.--31. 1. " INTID839 ,Interrupt ID839 Priority/Priority Byte Offset 839 " hexmask.long.byte 0x00 16.--23. 1. " INTID838 ,Interrupt ID838 Priority/Priority Byte Offset 838 " hexmask.long.byte 0x00 8.--15. 1. " INTID837 ,Interrupt ID837 Priority/Priority Byte Offset 837 " hexmask.long.byte 0x00 0.--7. 1. " INTID836 ,Interrupt ID836 Priority/Priority Byte Offset 836 " group.long 0x748++0x03 line.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210" hexmask.long.byte 0x00 24.--31. 1. " INTID843 ,Interrupt ID843 Priority/Priority Byte Offset 843 " hexmask.long.byte 0x00 16.--23. 1. " INTID842 ,Interrupt ID842 Priority/Priority Byte Offset 842 " hexmask.long.byte 0x00 8.--15. 1. " INTID841 ,Interrupt ID841 Priority/Priority Byte Offset 841 " hexmask.long.byte 0x00 0.--7. 1. " INTID840 ,Interrupt ID840 Priority/Priority Byte Offset 840 " group.long 0x74C++0x03 line.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211" hexmask.long.byte 0x00 24.--31. 1. " INTID847 ,Interrupt ID847 Priority/Priority Byte Offset 847 " hexmask.long.byte 0x00 16.--23. 1. " INTID846 ,Interrupt ID846 Priority/Priority Byte Offset 846 " hexmask.long.byte 0x00 8.--15. 1. " INTID845 ,Interrupt ID845 Priority/Priority Byte Offset 845 " hexmask.long.byte 0x00 0.--7. 1. " INTID844 ,Interrupt ID844 Priority/Priority Byte Offset 844 " group.long 0x750++0x03 line.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212" hexmask.long.byte 0x00 24.--31. 1. " INTID851 ,Interrupt ID851 Priority/Priority Byte Offset 851 " hexmask.long.byte 0x00 16.--23. 1. " INTID850 ,Interrupt ID850 Priority/Priority Byte Offset 850 " hexmask.long.byte 0x00 8.--15. 1. " INTID849 ,Interrupt ID849 Priority/Priority Byte Offset 849 " hexmask.long.byte 0x00 0.--7. 1. " INTID848 ,Interrupt ID848 Priority/Priority Byte Offset 848 " group.long 0x754++0x03 line.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213" hexmask.long.byte 0x00 24.--31. 1. " INTID855 ,Interrupt ID855 Priority/Priority Byte Offset 855 " hexmask.long.byte 0x00 16.--23. 1. " INTID854 ,Interrupt ID854 Priority/Priority Byte Offset 854 " hexmask.long.byte 0x00 8.--15. 1. " INTID853 ,Interrupt ID853 Priority/Priority Byte Offset 853 " hexmask.long.byte 0x00 0.--7. 1. " INTID852 ,Interrupt ID852 Priority/Priority Byte Offset 852 " group.long 0x758++0x03 line.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214" hexmask.long.byte 0x00 24.--31. 1. " INTID859 ,Interrupt ID859 Priority/Priority Byte Offset 859 " hexmask.long.byte 0x00 16.--23. 1. " INTID858 ,Interrupt ID858 Priority/Priority Byte Offset 858 " hexmask.long.byte 0x00 8.--15. 1. " INTID857 ,Interrupt ID857 Priority/Priority Byte Offset 857 " hexmask.long.byte 0x00 0.--7. 1. " INTID856 ,Interrupt ID856 Priority/Priority Byte Offset 856 " group.long 0x75C++0x03 line.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215" hexmask.long.byte 0x00 24.--31. 1. " INTID863 ,Interrupt ID863 Priority/Priority Byte Offset 863 " hexmask.long.byte 0x00 16.--23. 1. " INTID862 ,Interrupt ID862 Priority/Priority Byte Offset 862 " hexmask.long.byte 0x00 8.--15. 1. " INTID861 ,Interrupt ID861 Priority/Priority Byte Offset 861 " hexmask.long.byte 0x00 0.--7. 1. " INTID860 ,Interrupt ID860 Priority/Priority Byte Offset 860 " else hgroup.long 0x740++0x03 hide.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208" hgroup.long 0x744++0x03 hide.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209" hgroup.long 0x748++0x03 hide.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210" hgroup.long 0x74C++0x03 hide.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211" hgroup.long 0x750++0x03 hide.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212" hgroup.long 0x754++0x03 hide.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213" hgroup.long 0x758++0x03 hide.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214" hgroup.long 0x75C++0x03 hide.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1B) group.long 0x760++0x03 line.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216" hexmask.long.byte 0x00 24.--31. 1. " INTID867 ,Interrupt ID867 Priority/Priority Byte Offset 867 " hexmask.long.byte 0x00 16.--23. 1. " INTID866 ,Interrupt ID866 Priority/Priority Byte Offset 866 " hexmask.long.byte 0x00 8.--15. 1. " INTID865 ,Interrupt ID865 Priority/Priority Byte Offset 865 " hexmask.long.byte 0x00 0.--7. 1. " INTID864 ,Interrupt ID864 Priority/Priority Byte Offset 864 " group.long 0x764++0x03 line.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217" hexmask.long.byte 0x00 24.--31. 1. " INTID871 ,Interrupt ID871 Priority/Priority Byte Offset 871 " hexmask.long.byte 0x00 16.--23. 1. " INTID870 ,Interrupt ID870 Priority/Priority Byte Offset 870 " hexmask.long.byte 0x00 8.--15. 1. " INTID869 ,Interrupt ID869 Priority/Priority Byte Offset 869 " hexmask.long.byte 0x00 0.--7. 1. " INTID868 ,Interrupt ID868 Priority/Priority Byte Offset 868 " group.long 0x768++0x03 line.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218" hexmask.long.byte 0x00 24.--31. 1. " INTID875 ,Interrupt ID875 Priority/Priority Byte Offset 875 " hexmask.long.byte 0x00 16.--23. 1. " INTID874 ,Interrupt ID874 Priority/Priority Byte Offset 874 " hexmask.long.byte 0x00 8.--15. 1. " INTID873 ,Interrupt ID873 Priority/Priority Byte Offset 873 " hexmask.long.byte 0x00 0.--7. 1. " INTID872 ,Interrupt ID872 Priority/Priority Byte Offset 872 " group.long 0x76C++0x03 line.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219" hexmask.long.byte 0x00 24.--31. 1. " INTID879 ,Interrupt ID879 Priority/Priority Byte Offset 879 " hexmask.long.byte 0x00 16.--23. 1. " INTID878 ,Interrupt ID878 Priority/Priority Byte Offset 878 " hexmask.long.byte 0x00 8.--15. 1. " INTID877 ,Interrupt ID877 Priority/Priority Byte Offset 877 " hexmask.long.byte 0x00 0.--7. 1. " INTID876 ,Interrupt ID876 Priority/Priority Byte Offset 876 " group.long 0x770++0x03 line.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220" hexmask.long.byte 0x00 24.--31. 1. " INTID883 ,Interrupt ID883 Priority/Priority Byte Offset 883 " hexmask.long.byte 0x00 16.--23. 1. " INTID882 ,Interrupt ID882 Priority/Priority Byte Offset 882 " hexmask.long.byte 0x00 8.--15. 1. " INTID881 ,Interrupt ID881 Priority/Priority Byte Offset 881 " hexmask.long.byte 0x00 0.--7. 1. " INTID880 ,Interrupt ID880 Priority/Priority Byte Offset 880 " group.long 0x774++0x03 line.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221" hexmask.long.byte 0x00 24.--31. 1. " INTID887 ,Interrupt ID887 Priority/Priority Byte Offset 887 " hexmask.long.byte 0x00 16.--23. 1. " INTID886 ,Interrupt ID886 Priority/Priority Byte Offset 886 " hexmask.long.byte 0x00 8.--15. 1. " INTID885 ,Interrupt ID885 Priority/Priority Byte Offset 885 " hexmask.long.byte 0x00 0.--7. 1. " INTID884 ,Interrupt ID884 Priority/Priority Byte Offset 884 " group.long 0x778++0x03 line.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222" hexmask.long.byte 0x00 24.--31. 1. " INTID891 ,Interrupt ID891 Priority/Priority Byte Offset 891 " hexmask.long.byte 0x00 16.--23. 1. " INTID890 ,Interrupt ID890 Priority/Priority Byte Offset 890 " hexmask.long.byte 0x00 8.--15. 1. " INTID889 ,Interrupt ID889 Priority/Priority Byte Offset 889 " hexmask.long.byte 0x00 0.--7. 1. " INTID888 ,Interrupt ID888 Priority/Priority Byte Offset 888 " group.long 0x77C++0x03 line.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223" hexmask.long.byte 0x00 24.--31. 1. " INTID895 ,Interrupt ID895 Priority/Priority Byte Offset 895 " hexmask.long.byte 0x00 16.--23. 1. " INTID894 ,Interrupt ID894 Priority/Priority Byte Offset 894 " hexmask.long.byte 0x00 8.--15. 1. " INTID893 ,Interrupt ID893 Priority/Priority Byte Offset 893 " hexmask.long.byte 0x00 0.--7. 1. " INTID892 ,Interrupt ID892 Priority/Priority Byte Offset 892 " else hgroup.long 0x760++0x03 hide.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216" hgroup.long 0x764++0x03 hide.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217" hgroup.long 0x768++0x03 hide.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218" hgroup.long 0x76C++0x03 hide.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219" hgroup.long 0x770++0x03 hide.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220" hgroup.long 0x774++0x03 hide.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221" hgroup.long 0x778++0x03 hide.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222" hgroup.long 0x77C++0x03 hide.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1C) group.long 0x780++0x03 line.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224" hexmask.long.byte 0x00 24.--31. 1. " INTID899 ,Interrupt ID899 Priority/Priority Byte Offset 899 " hexmask.long.byte 0x00 16.--23. 1. " INTID898 ,Interrupt ID898 Priority/Priority Byte Offset 898 " hexmask.long.byte 0x00 8.--15. 1. " INTID897 ,Interrupt ID897 Priority/Priority Byte Offset 897 " hexmask.long.byte 0x00 0.--7. 1. " INTID896 ,Interrupt ID896 Priority/Priority Byte Offset 896 " group.long 0x784++0x03 line.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225" hexmask.long.byte 0x00 24.--31. 1. " INTID903 ,Interrupt ID903 Priority/Priority Byte Offset 903 " hexmask.long.byte 0x00 16.--23. 1. " INTID902 ,Interrupt ID902 Priority/Priority Byte Offset 902 " hexmask.long.byte 0x00 8.--15. 1. " INTID901 ,Interrupt ID901 Priority/Priority Byte Offset 901 " hexmask.long.byte 0x00 0.--7. 1. " INTID900 ,Interrupt ID900 Priority/Priority Byte Offset 900 " group.long 0x788++0x03 line.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226" hexmask.long.byte 0x00 24.--31. 1. " INTID907 ,Interrupt ID907 Priority/Priority Byte Offset 907 " hexmask.long.byte 0x00 16.--23. 1. " INTID906 ,Interrupt ID906 Priority/Priority Byte Offset 906 " hexmask.long.byte 0x00 8.--15. 1. " INTID905 ,Interrupt ID905 Priority/Priority Byte Offset 905 " hexmask.long.byte 0x00 0.--7. 1. " INTID904 ,Interrupt ID904 Priority/Priority Byte Offset 904 " group.long 0x78C++0x03 line.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227" hexmask.long.byte 0x00 24.--31. 1. " INTID911 ,Interrupt ID911 Priority/Priority Byte Offset 911 " hexmask.long.byte 0x00 16.--23. 1. " INTID910 ,Interrupt ID910 Priority/Priority Byte Offset 910 " hexmask.long.byte 0x00 8.--15. 1. " INTID909 ,Interrupt ID909 Priority/Priority Byte Offset 909 " hexmask.long.byte 0x00 0.--7. 1. " INTID908 ,Interrupt ID908 Priority/Priority Byte Offset 908 " group.long 0x790++0x03 line.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228" hexmask.long.byte 0x00 24.--31. 1. " INTID915 ,Interrupt ID915 Priority/Priority Byte Offset 915 " hexmask.long.byte 0x00 16.--23. 1. " INTID914 ,Interrupt ID914 Priority/Priority Byte Offset 914 " hexmask.long.byte 0x00 8.--15. 1. " INTID913 ,Interrupt ID913 Priority/Priority Byte Offset 913 " hexmask.long.byte 0x00 0.--7. 1. " INTID912 ,Interrupt ID912 Priority/Priority Byte Offset 912 " group.long 0x794++0x03 line.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229" hexmask.long.byte 0x00 24.--31. 1. " INTID919 ,Interrupt ID919 Priority/Priority Byte Offset 919 " hexmask.long.byte 0x00 16.--23. 1. " INTID918 ,Interrupt ID918 Priority/Priority Byte Offset 918 " hexmask.long.byte 0x00 8.--15. 1. " INTID917 ,Interrupt ID917 Priority/Priority Byte Offset 917 " hexmask.long.byte 0x00 0.--7. 1. " INTID916 ,Interrupt ID916 Priority/Priority Byte Offset 916 " group.long 0x798++0x03 line.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230" hexmask.long.byte 0x00 24.--31. 1. " INTID923 ,Interrupt ID923 Priority/Priority Byte Offset 923 " hexmask.long.byte 0x00 16.--23. 1. " INTID922 ,Interrupt ID922 Priority/Priority Byte Offset 922 " hexmask.long.byte 0x00 8.--15. 1. " INTID921 ,Interrupt ID921 Priority/Priority Byte Offset 921 " hexmask.long.byte 0x00 0.--7. 1. " INTID920 ,Interrupt ID920 Priority/Priority Byte Offset 920 " group.long 0x79C++0x03 line.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231" hexmask.long.byte 0x00 24.--31. 1. " INTID927 ,Interrupt ID927 Priority/Priority Byte Offset 927 " hexmask.long.byte 0x00 16.--23. 1. " INTID926 ,Interrupt ID926 Priority/Priority Byte Offset 926 " hexmask.long.byte 0x00 8.--15. 1. " INTID925 ,Interrupt ID925 Priority/Priority Byte Offset 925 " hexmask.long.byte 0x00 0.--7. 1. " INTID924 ,Interrupt ID924 Priority/Priority Byte Offset 924 " else hgroup.long 0x780++0x03 hide.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224" hgroup.long 0x784++0x03 hide.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225" hgroup.long 0x788++0x03 hide.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226" hgroup.long 0x78C++0x03 hide.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227" hgroup.long 0x790++0x03 hide.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228" hgroup.long 0x794++0x03 hide.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229" hgroup.long 0x798++0x03 hide.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230" hgroup.long 0x79C++0x03 hide.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1D) group.long 0x7A0++0x03 line.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232" hexmask.long.byte 0x00 24.--31. 1. " INTID931 ,Interrupt ID931 Priority/Priority Byte Offset 931 " hexmask.long.byte 0x00 16.--23. 1. " INTID930 ,Interrupt ID930 Priority/Priority Byte Offset 930 " hexmask.long.byte 0x00 8.--15. 1. " INTID929 ,Interrupt ID929 Priority/Priority Byte Offset 929 " hexmask.long.byte 0x00 0.--7. 1. " INTID928 ,Interrupt ID928 Priority/Priority Byte Offset 928 " group.long 0x7A4++0x03 line.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233" hexmask.long.byte 0x00 24.--31. 1. " INTID935 ,Interrupt ID935 Priority/Priority Byte Offset 935 " hexmask.long.byte 0x00 16.--23. 1. " INTID934 ,Interrupt ID934 Priority/Priority Byte Offset 934 " hexmask.long.byte 0x00 8.--15. 1. " INTID933 ,Interrupt ID933 Priority/Priority Byte Offset 933 " hexmask.long.byte 0x00 0.--7. 1. " INTID932 ,Interrupt ID932 Priority/Priority Byte Offset 932 " group.long 0x7A8++0x03 line.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234" hexmask.long.byte 0x00 24.--31. 1. " INTID939 ,Interrupt ID939 Priority/Priority Byte Offset 939 " hexmask.long.byte 0x00 16.--23. 1. " INTID938 ,Interrupt ID938 Priority/Priority Byte Offset 938 " hexmask.long.byte 0x00 8.--15. 1. " INTID937 ,Interrupt ID937 Priority/Priority Byte Offset 937 " hexmask.long.byte 0x00 0.--7. 1. " INTID936 ,Interrupt ID936 Priority/Priority Byte Offset 936 " group.long 0x7AC++0x03 line.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235" hexmask.long.byte 0x00 24.--31. 1. " INTID943 ,Interrupt ID943 Priority/Priority Byte Offset 943 " hexmask.long.byte 0x00 16.--23. 1. " INTID942 ,Interrupt ID942 Priority/Priority Byte Offset 942 " hexmask.long.byte 0x00 8.--15. 1. " INTID941 ,Interrupt ID941 Priority/Priority Byte Offset 941 " hexmask.long.byte 0x00 0.--7. 1. " INTID940 ,Interrupt ID940 Priority/Priority Byte Offset 940 " group.long 0x7B0++0x03 line.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236" hexmask.long.byte 0x00 24.--31. 1. " INTID947 ,Interrupt ID947 Priority/Priority Byte Offset 947 " hexmask.long.byte 0x00 16.--23. 1. " INTID946 ,Interrupt ID946 Priority/Priority Byte Offset 946 " hexmask.long.byte 0x00 8.--15. 1. " INTID945 ,Interrupt ID945 Priority/Priority Byte Offset 945 " hexmask.long.byte 0x00 0.--7. 1. " INTID944 ,Interrupt ID944 Priority/Priority Byte Offset 944 " group.long 0x7B4++0x03 line.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237" hexmask.long.byte 0x00 24.--31. 1. " INTID951 ,Interrupt ID951 Priority/Priority Byte Offset 951 " hexmask.long.byte 0x00 16.--23. 1. " INTID950 ,Interrupt ID950 Priority/Priority Byte Offset 950 " hexmask.long.byte 0x00 8.--15. 1. " INTID949 ,Interrupt ID949 Priority/Priority Byte Offset 949 " hexmask.long.byte 0x00 0.--7. 1. " INTID948 ,Interrupt ID948 Priority/Priority Byte Offset 948 " group.long 0x7B8++0x03 line.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238" hexmask.long.byte 0x00 24.--31. 1. " INTID955 ,Interrupt ID955 Priority/Priority Byte Offset 955 " hexmask.long.byte 0x00 16.--23. 1. " INTID954 ,Interrupt ID954 Priority/Priority Byte Offset 954 " hexmask.long.byte 0x00 8.--15. 1. " INTID953 ,Interrupt ID953 Priority/Priority Byte Offset 953 " hexmask.long.byte 0x00 0.--7. 1. " INTID952 ,Interrupt ID952 Priority/Priority Byte Offset 952 " group.long 0x7BC++0x03 line.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239" hexmask.long.byte 0x00 24.--31. 1. " INTID959 ,Interrupt ID959 Priority/Priority Byte Offset 959 " hexmask.long.byte 0x00 16.--23. 1. " INTID958 ,Interrupt ID958 Priority/Priority Byte Offset 958 " hexmask.long.byte 0x00 8.--15. 1. " INTID957 ,Interrupt ID957 Priority/Priority Byte Offset 957 " hexmask.long.byte 0x00 0.--7. 1. " INTID956 ,Interrupt ID956 Priority/Priority Byte Offset 956 " else hgroup.long 0x7A0++0x03 hide.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232" hgroup.long 0x7A4++0x03 hide.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233" hgroup.long 0x7A8++0x03 hide.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234" hgroup.long 0x7AC++0x03 hide.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235" hgroup.long 0x7B0++0x03 hide.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236" hgroup.long 0x7B4++0x03 hide.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237" hgroup.long 0x7B8++0x03 hide.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238" hgroup.long 0x7BC++0x03 hide.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1E) group.long 0x7C0++0x03 line.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240" hexmask.long.byte 0x00 24.--31. 1. " INTID963 ,Interrupt ID963 Priority/Priority Byte Offset 963 " hexmask.long.byte 0x00 16.--23. 1. " INTID962 ,Interrupt ID962 Priority/Priority Byte Offset 962 " hexmask.long.byte 0x00 8.--15. 1. " INTID961 ,Interrupt ID961 Priority/Priority Byte Offset 961 " hexmask.long.byte 0x00 0.--7. 1. " INTID960 ,Interrupt ID960 Priority/Priority Byte Offset 960 " group.long 0x7C4++0x03 line.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241" hexmask.long.byte 0x00 24.--31. 1. " INTID967 ,Interrupt ID967 Priority/Priority Byte Offset 967 " hexmask.long.byte 0x00 16.--23. 1. " INTID966 ,Interrupt ID966 Priority/Priority Byte Offset 966 " hexmask.long.byte 0x00 8.--15. 1. " INTID965 ,Interrupt ID965 Priority/Priority Byte Offset 965 " hexmask.long.byte 0x00 0.--7. 1. " INTID964 ,Interrupt ID964 Priority/Priority Byte Offset 964 " group.long 0x7C8++0x03 line.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242" hexmask.long.byte 0x00 24.--31. 1. " INTID971 ,Interrupt ID971 Priority/Priority Byte Offset 971 " hexmask.long.byte 0x00 16.--23. 1. " INTID970 ,Interrupt ID970 Priority/Priority Byte Offset 970 " hexmask.long.byte 0x00 8.--15. 1. " INTID969 ,Interrupt ID969 Priority/Priority Byte Offset 969 " hexmask.long.byte 0x00 0.--7. 1. " INTID968 ,Interrupt ID968 Priority/Priority Byte Offset 968 " group.long 0x7CC++0x03 line.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243" hexmask.long.byte 0x00 24.--31. 1. " INTID975 ,Interrupt ID975 Priority/Priority Byte Offset 975 " hexmask.long.byte 0x00 16.--23. 1. " INTID974 ,Interrupt ID974 Priority/Priority Byte Offset 974 " hexmask.long.byte 0x00 8.--15. 1. " INTID973 ,Interrupt ID973 Priority/Priority Byte Offset 973 " hexmask.long.byte 0x00 0.--7. 1. " INTID972 ,Interrupt ID972 Priority/Priority Byte Offset 972 " group.long 0x7D0++0x03 line.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244" hexmask.long.byte 0x00 24.--31. 1. " INTID979 ,Interrupt ID979 Priority/Priority Byte Offset 979 " hexmask.long.byte 0x00 16.--23. 1. " INTID978 ,Interrupt ID978 Priority/Priority Byte Offset 978 " hexmask.long.byte 0x00 8.--15. 1. " INTID977 ,Interrupt ID977 Priority/Priority Byte Offset 977 " hexmask.long.byte 0x00 0.--7. 1. " INTID976 ,Interrupt ID976 Priority/Priority Byte Offset 976 " group.long 0x7D4++0x03 line.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245" hexmask.long.byte 0x00 24.--31. 1. " INTID983 ,Interrupt ID983 Priority/Priority Byte Offset 983 " hexmask.long.byte 0x00 16.--23. 1. " INTID982 ,Interrupt ID982 Priority/Priority Byte Offset 982 " hexmask.long.byte 0x00 8.--15. 1. " INTID981 ,Interrupt ID981 Priority/Priority Byte Offset 981 " hexmask.long.byte 0x00 0.--7. 1. " INTID980 ,Interrupt ID980 Priority/Priority Byte Offset 980 " group.long 0x7D8++0x03 line.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246" hexmask.long.byte 0x00 24.--31. 1. " INTID987 ,Interrupt ID987 Priority/Priority Byte Offset 987 " hexmask.long.byte 0x00 16.--23. 1. " INTID986 ,Interrupt ID986 Priority/Priority Byte Offset 986 " hexmask.long.byte 0x00 8.--15. 1. " INTID985 ,Interrupt ID985 Priority/Priority Byte Offset 985 " hexmask.long.byte 0x00 0.--7. 1. " INTID984 ,Interrupt ID984 Priority/Priority Byte Offset 984 " group.long 0x7DC++0x03 line.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247" hexmask.long.byte 0x00 24.--31. 1. " INTID991 ,Interrupt ID991 Priority/Priority Byte Offset 991 " hexmask.long.byte 0x00 16.--23. 1. " INTID990 ,Interrupt ID990 Priority/Priority Byte Offset 990 " hexmask.long.byte 0x00 8.--15. 1. " INTID989 ,Interrupt ID989 Priority/Priority Byte Offset 989 " hexmask.long.byte 0x00 0.--7. 1. " INTID988 ,Interrupt ID988 Priority/Priority Byte Offset 988 " else hgroup.long 0x7C0++0x03 hide.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240" hgroup.long 0x7C4++0x03 hide.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241" hgroup.long 0x7C8++0x03 hide.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242" hgroup.long 0x7CC++0x03 hide.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243" hgroup.long 0x7D0++0x03 hide.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244" hgroup.long 0x7D4++0x03 hide.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245" hgroup.long 0x7D8++0x03 hide.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246" hgroup.long 0x7DC++0x03 hide.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1F) group.long 0x7E0++0x03 line.long 0x00 "GICD_IPRIORITYR248,Interrupt Priority Register 248" hexmask.long.byte 0x00 24.--31. 1. " INTID995 ,Interrupt ID995 Priority/Priority Byte Offset 995 " hexmask.long.byte 0x00 16.--23. 1. " INTID994 ,Interrupt ID994 Priority/Priority Byte Offset 994 " hexmask.long.byte 0x00 8.--15. 1. " INTID993 ,Interrupt ID993 Priority/Priority Byte Offset 993 " hexmask.long.byte 0x00 0.--7. 1. " INTID992 ,Interrupt ID992 Priority/Priority Byte Offset 992 " group.long 0x7E4++0x03 line.long 0x00 "GICD_IPRIORITYR249,Interrupt Priority Register 249" hexmask.long.byte 0x00 24.--31. 1. " INTID999 ,Interrupt ID999 Priority/Priority Byte Offset 999 " hexmask.long.byte 0x00 16.--23. 1. " INTID998 ,Interrupt ID998 Priority/Priority Byte Offset 998 " hexmask.long.byte 0x00 8.--15. 1. " INTID997 ,Interrupt ID997 Priority/Priority Byte Offset 997 " hexmask.long.byte 0x00 0.--7. 1. " INTID996 ,Interrupt ID996 Priority/Priority Byte Offset 996 " group.long 0x7E8++0x03 line.long 0x00 "GICD_IPRIORITYR250,Interrupt Priority Register 250" hexmask.long.byte 0x00 24.--31. 1. " INTID1003 ,Interrupt ID1003 Priority/Priority Byte Offset 1003" hexmask.long.byte 0x00 16.--23. 1. " INTID1002 ,Interrupt ID1002 Priority/Priority Byte Offset 1002" hexmask.long.byte 0x00 8.--15. 1. " INTID1001 ,Interrupt ID1001 Priority/Priority Byte Offset 1001" hexmask.long.byte 0x00 0.--7. 1. " INTID1000 ,Interrupt ID1000 Priority/Priority Byte Offset 1000" group.long 0x7EC++0x03 line.long 0x00 "GICD_IPRIORITYR251,Interrupt Priority Register 251" hexmask.long.byte 0x00 24.--31. 1. " INTID1007 ,Interrupt ID1007 Priority/Priority Byte Offset 1007" hexmask.long.byte 0x00 16.--23. 1. " INTID1006 ,Interrupt ID1006 Priority/Priority Byte Offset 1006" hexmask.long.byte 0x00 8.--15. 1. " INTID1005 ,Interrupt ID1005 Priority/Priority Byte Offset 1005" hexmask.long.byte 0x00 0.--7. 1. " INTID1004 ,Interrupt ID1004 Priority/Priority Byte Offset 1004" group.long 0x7F0++0x03 line.long 0x00 "GICD_IPRIORITYR252,Interrupt Priority Register 252" hexmask.long.byte 0x00 24.--31. 1. " INTID1011 ,Interrupt ID1011 Priority/Priority Byte Offset 1011" hexmask.long.byte 0x00 16.--23. 1. " INTID1010 ,Interrupt ID1010 Priority/Priority Byte Offset 1010" hexmask.long.byte 0x00 8.--15. 1. " INTID1009 ,Interrupt ID1009 Priority/Priority Byte Offset 1009" hexmask.long.byte 0x00 0.--7. 1. " INTID1008 ,Interrupt ID1008 Priority/Priority Byte Offset 1008" group.long 0x7F4++0x03 line.long 0x00 "GICD_IPRIORITYR253,Interrupt Priority Register 253" hexmask.long.byte 0x00 24.--31. 1. " INTID1015 ,Interrupt ID1015 Priority/Priority Byte Offset 1015" hexmask.long.byte 0x00 16.--23. 1. " INTID1014 ,Interrupt ID1014 Priority/Priority Byte Offset 1014" hexmask.long.byte 0x00 8.--15. 1. " INTID1013 ,Interrupt ID1013 Priority/Priority Byte Offset 1013" hexmask.long.byte 0x00 0.--7. 1. " INTID1012 ,Interrupt ID1012 Priority/Priority Byte Offset 1012" group.long 0x7F8++0x03 line.long 0x00 "GICD_IPRIORITYR254,Interrupt Priority Register 254" hexmask.long.byte 0x00 24.--31. 1. " INTID1019 ,Interrupt ID1019 Priority/Priority Byte Offset 1019" hexmask.long.byte 0x00 16.--23. 1. " INTID1018 ,Interrupt ID1018 Priority/Priority Byte Offset 1018" hexmask.long.byte 0x00 8.--15. 1. " INTID1017 ,Interrupt ID1017 Priority/Priority Byte Offset 1017" hexmask.long.byte 0x00 0.--7. 1. " INTID1016 ,Interrupt ID1016 Priority/Priority Byte Offset 1016" else hgroup.long 0x7E0++0x03 hide.long 0x00 "GICD_IPRIORITYR248,Interrupt Priority Register 248" hgroup.long 0x7E4++0x03 hide.long 0x00 "GICD_IPRIORITYR249,Interrupt Priority Register 249" hgroup.long 0x7E8++0x03 hide.long 0x00 "GICD_IPRIORITYR250,Interrupt Priority Register 250" hgroup.long 0x7EC++0x03 hide.long 0x00 "GICD_IPRIORITYR251,Interrupt Priority Register 251" hgroup.long 0x7F0++0x03 hide.long 0x00 "GICD_IPRIORITYR252,Interrupt Priority Register 252" hgroup.long 0x7F4++0x03 hide.long 0x00 "GICD_IPRIORITYR253,Interrupt Priority Register 253" hgroup.long 0x7F8++0x03 hide.long 0x00 "GICD_IPRIORITYR254,Interrupt Priority Register 254" endif tree.end width 19. tree "Processor Targets Registers" if (((d.l(AD:0xfffed000+0x04))&0x000000E0)>0x1) rgroup.long 0x800++0x03 line.long 0x00 "GICD_ITARGETSR0,Interrupt Processor Targets Register 0" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO3 ,CPU Targets Byte Offset 3 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO2 ,CPU Targets Byte Offset 2 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1 ,CPU Targets Byte Offset 1 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO0 ,CPU Targets Byte Offset 0 " rgroup.long 0x804++0x03 line.long 0x00 "GICD_ITARGETSR1,Interrupt Processor Targets Register 1" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO7 ,CPU Targets Byte Offset 7 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO6 ,CPU Targets Byte Offset 6 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO5 ,CPU Targets Byte Offset 5 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO4 ,CPU Targets Byte Offset 4 " rgroup.long 0x808++0x03 line.long 0x00 "GICD_ITARGETSR2,Interrupt Processor Targets Register 2" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO11 ,CPU Targets Byte Offset 11 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO10 ,CPU Targets Byte Offset 10 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO9 ,CPU Targets Byte Offset 9 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO8 ,CPU Targets Byte Offset 8 " rgroup.long 0x80C++0x03 line.long 0x00 "GICD_ITARGETSR3,Interrupt Processor Targets Register 3" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO15 ,CPU Targets Byte Offset 15 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO14 ,CPU Targets Byte Offset 14 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO13 ,CPU Targets Byte Offset 13 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO12 ,CPU Targets Byte Offset 12 " rgroup.long 0x810++0x03 line.long 0x00 "GICD_ITARGETSR4,Interrupt Processor Targets Register 4" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO19 ,CPU Targets Byte Offset 19 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO18 ,CPU Targets Byte Offset 18 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO17 ,CPU Targets Byte Offset 17 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO16 ,CPU Targets Byte Offset 16 " rgroup.long 0x814++0x03 line.long 0x00 "GICD_ITARGETSR5,Interrupt Processor Targets Register 5" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO23 ,CPU Targets Byte Offset 23 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO22 ,CPU Targets Byte Offset 22 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO21 ,CPU Targets Byte Offset 21 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO20 ,CPU Targets Byte Offset 20 " rgroup.long 0x818++0x03 line.long 0x00 "GICD_ITARGETSR6,Interrupt Processor Targets Register 6" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO27 ,CPU Targets Byte Offset 27 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO26 ,CPU Targets Byte Offset 26 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO25 ,CPU Targets Byte Offset 25 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO24 ,CPU Targets Byte Offset 24 " rgroup.long 0x81C++0x03 line.long 0x00 "GICD_ITARGETSR7,Interrupt Processor Targets Register 7" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO31 ,CPU Targets Byte Offset 31 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO30 ,CPU Targets Byte Offset 30 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO29 ,CPU Targets Byte Offset 29 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO28 ,CPU Targets Byte Offset 28 " if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x01) group.long 0x820++0x03 line.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO35 ,CPU Targets Byte Offset 35 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO34 ,CPU Targets Byte Offset 34 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO33 ,CPU Targets Byte Offset 33 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO32 ,CPU Targets Byte Offset 32 " group.long 0x824++0x03 line.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO39 ,CPU Targets Byte Offset 39 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO38 ,CPU Targets Byte Offset 38 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO37 ,CPU Targets Byte Offset 37 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO36 ,CPU Targets Byte Offset 36 " group.long 0x828++0x03 line.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO43 ,CPU Targets Byte Offset 43 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO42 ,CPU Targets Byte Offset 42 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO41 ,CPU Targets Byte Offset 41 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO40 ,CPU Targets Byte Offset 40 " group.long 0x82C++0x03 line.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO47 ,CPU Targets Byte Offset 47 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO46 ,CPU Targets Byte Offset 46 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO45 ,CPU Targets Byte Offset 45 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO44 ,CPU Targets Byte Offset 44 " group.long 0x830++0x03 line.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO51 ,CPU Targets Byte Offset 51 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO50 ,CPU Targets Byte Offset 50 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO49 ,CPU Targets Byte Offset 49 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO48 ,CPU Targets Byte Offset 48 " group.long 0x834++0x03 line.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO55 ,CPU Targets Byte Offset 55 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO54 ,CPU Targets Byte Offset 54 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO53 ,CPU Targets Byte Offset 53 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO52 ,CPU Targets Byte Offset 52 " group.long 0x838++0x03 line.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO59 ,CPU Targets Byte Offset 59 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO58 ,CPU Targets Byte Offset 58 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO57 ,CPU Targets Byte Offset 57 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO56 ,CPU Targets Byte Offset 56 " group.long 0x83C++0x03 line.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO63 ,CPU Targets Byte Offset 63 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO62 ,CPU Targets Byte Offset 62 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO61 ,CPU Targets Byte Offset 61 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO60 ,CPU Targets Byte Offset 60 " else hgroup.long 0x820++0x03 hide.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8" hgroup.long 0x824++0x03 hide.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9" hgroup.long 0x828++0x03 hide.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10" hgroup.long 0x82C++0x03 hide.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11" hgroup.long 0x830++0x03 hide.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12" hgroup.long 0x834++0x03 hide.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13" hgroup.long 0x838++0x03 hide.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14" hgroup.long 0x83C++0x03 hide.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x02) group.long 0x840++0x03 line.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO67 ,CPU Targets Byte Offset 67 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO66 ,CPU Targets Byte Offset 66 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO65 ,CPU Targets Byte Offset 65 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO64 ,CPU Targets Byte Offset 64 " group.long 0x844++0x03 line.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO71 ,CPU Targets Byte Offset 71 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO70 ,CPU Targets Byte Offset 70 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO69 ,CPU Targets Byte Offset 69 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO68 ,CPU Targets Byte Offset 68 " group.long 0x848++0x03 line.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO75 ,CPU Targets Byte Offset 75 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO74 ,CPU Targets Byte Offset 74 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO73 ,CPU Targets Byte Offset 73 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO72 ,CPU Targets Byte Offset 72 " group.long 0x84C++0x03 line.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO79 ,CPU Targets Byte Offset 79 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO78 ,CPU Targets Byte Offset 78 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO77 ,CPU Targets Byte Offset 77 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO76 ,CPU Targets Byte Offset 76 " group.long 0x850++0x03 line.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO83 ,CPU Targets Byte Offset 83 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO82 ,CPU Targets Byte Offset 82 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO81 ,CPU Targets Byte Offset 81 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO80 ,CPU Targets Byte Offset 80 " group.long 0x854++0x03 line.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO87 ,CPU Targets Byte Offset 87 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO86 ,CPU Targets Byte Offset 86 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO85 ,CPU Targets Byte Offset 85 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO84 ,CPU Targets Byte Offset 84 " group.long 0x858++0x03 line.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO91 ,CPU Targets Byte Offset 91 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO90 ,CPU Targets Byte Offset 90 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO89 ,CPU Targets Byte Offset 89 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO88 ,CPU Targets Byte Offset 88 " group.long 0x85C++0x03 line.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO95 ,CPU Targets Byte Offset 95 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO94 ,CPU Targets Byte Offset 94 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO93 ,CPU Targets Byte Offset 93 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO92 ,CPU Targets Byte Offset 92 " else hgroup.long 0x840++0x03 hide.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16" hgroup.long 0x844++0x03 hide.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17" hgroup.long 0x848++0x03 hide.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18" hgroup.long 0x84C++0x03 hide.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19" hgroup.long 0x850++0x03 hide.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20" hgroup.long 0x854++0x03 hide.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21" hgroup.long 0x858++0x03 hide.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22" hgroup.long 0x85C++0x03 hide.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x03) group.long 0x860++0x03 line.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO99 ,CPU Targets Byte Offset 99 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO98 ,CPU Targets Byte Offset 98 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO97 ,CPU Targets Byte Offset 97 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO96 ,CPU Targets Byte Offset 96 " group.long 0x864++0x03 line.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO103 ,CPU Targets Byte Offset 103 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO102 ,CPU Targets Byte Offset 102 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO101 ,CPU Targets Byte Offset 101 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO100 ,CPU Targets Byte Offset 100 " group.long 0x868++0x03 line.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO107 ,CPU Targets Byte Offset 107 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO106 ,CPU Targets Byte Offset 106 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO105 ,CPU Targets Byte Offset 105 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO104 ,CPU Targets Byte Offset 104 " group.long 0x86C++0x03 line.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO111 ,CPU Targets Byte Offset 111 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO110 ,CPU Targets Byte Offset 110 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO109 ,CPU Targets Byte Offset 109 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO108 ,CPU Targets Byte Offset 108 " group.long 0x870++0x03 line.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO115 ,CPU Targets Byte Offset 115 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO114 ,CPU Targets Byte Offset 114 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO113 ,CPU Targets Byte Offset 113 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO112 ,CPU Targets Byte Offset 112 " group.long 0x874++0x03 line.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO119 ,CPU Targets Byte Offset 119 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO118 ,CPU Targets Byte Offset 118 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO117 ,CPU Targets Byte Offset 117 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO116 ,CPU Targets Byte Offset 116 " group.long 0x878++0x03 line.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO123 ,CPU Targets Byte Offset 123 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO122 ,CPU Targets Byte Offset 122 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO121 ,CPU Targets Byte Offset 121 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO120 ,CPU Targets Byte Offset 120 " group.long 0x87C++0x03 line.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO127 ,CPU Targets Byte Offset 127 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO126 ,CPU Targets Byte Offset 126 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO125 ,CPU Targets Byte Offset 125 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO124 ,CPU Targets Byte Offset 124 " else hgroup.long 0x860++0x03 hide.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24" hgroup.long 0x864++0x03 hide.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25" hgroup.long 0x868++0x03 hide.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26" hgroup.long 0x86C++0x03 hide.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27" hgroup.long 0x870++0x03 hide.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28" hgroup.long 0x874++0x03 hide.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29" hgroup.long 0x878++0x03 hide.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30" hgroup.long 0x87C++0x03 hide.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x04) group.long 0x880++0x03 line.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO131 ,CPU Targets Byte Offset 131 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO130 ,CPU Targets Byte Offset 130 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO129 ,CPU Targets Byte Offset 129 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO128 ,CPU Targets Byte Offset 128 " group.long 0x884++0x03 line.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO135 ,CPU Targets Byte Offset 135 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO134 ,CPU Targets Byte Offset 134 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO133 ,CPU Targets Byte Offset 133 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO132 ,CPU Targets Byte Offset 132 " group.long 0x888++0x03 line.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO139 ,CPU Targets Byte Offset 139 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO138 ,CPU Targets Byte Offset 138 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO137 ,CPU Targets Byte Offset 137 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO136 ,CPU Targets Byte Offset 136 " group.long 0x88C++0x03 line.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO143 ,CPU Targets Byte Offset 143 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO142 ,CPU Targets Byte Offset 142 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO141 ,CPU Targets Byte Offset 141 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO140 ,CPU Targets Byte Offset 140 " group.long 0x890++0x03 line.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO147 ,CPU Targets Byte Offset 147 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO146 ,CPU Targets Byte Offset 146 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO145 ,CPU Targets Byte Offset 145 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO144 ,CPU Targets Byte Offset 144 " group.long 0x894++0x03 line.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO151 ,CPU Targets Byte Offset 151 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO150 ,CPU Targets Byte Offset 150 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO149 ,CPU Targets Byte Offset 149 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO148 ,CPU Targets Byte Offset 148 " group.long 0x898++0x03 line.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO155 ,CPU Targets Byte Offset 155 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO154 ,CPU Targets Byte Offset 154 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO153 ,CPU Targets Byte Offset 153 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO152 ,CPU Targets Byte Offset 152 " group.long 0x89C++0x03 line.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO159 ,CPU Targets Byte Offset 159 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO158 ,CPU Targets Byte Offset 158 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO157 ,CPU Targets Byte Offset 157 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO156 ,CPU Targets Byte Offset 156 " else hgroup.long 0x880++0x03 hide.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32" hgroup.long 0x884++0x03 hide.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33" hgroup.long 0x888++0x03 hide.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34" hgroup.long 0x88C++0x03 hide.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35" hgroup.long 0x890++0x03 hide.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36" hgroup.long 0x894++0x03 hide.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37" hgroup.long 0x898++0x03 hide.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38" hgroup.long 0x89C++0x03 hide.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x05) group.long 0x8A0++0x03 line.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO163 ,CPU Targets Byte Offset 163 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO162 ,CPU Targets Byte Offset 162 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO161 ,CPU Targets Byte Offset 161 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO160 ,CPU Targets Byte Offset 160 " group.long 0x8A4++0x03 line.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO167 ,CPU Targets Byte Offset 167 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO166 ,CPU Targets Byte Offset 166 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO165 ,CPU Targets Byte Offset 165 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO164 ,CPU Targets Byte Offset 164 " group.long 0x8A8++0x03 line.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO171 ,CPU Targets Byte Offset 171 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO170 ,CPU Targets Byte Offset 170 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO169 ,CPU Targets Byte Offset 169 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO168 ,CPU Targets Byte Offset 168 " group.long 0x8AC++0x03 line.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO175 ,CPU Targets Byte Offset 175 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO174 ,CPU Targets Byte Offset 174 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO173 ,CPU Targets Byte Offset 173 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO172 ,CPU Targets Byte Offset 172 " group.long 0x8B0++0x03 line.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO179 ,CPU Targets Byte Offset 179 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO178 ,CPU Targets Byte Offset 178 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO177 ,CPU Targets Byte Offset 177 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO176 ,CPU Targets Byte Offset 176 " group.long 0x8B4++0x03 line.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO183 ,CPU Targets Byte Offset 183 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO182 ,CPU Targets Byte Offset 182 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO181 ,CPU Targets Byte Offset 181 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO180 ,CPU Targets Byte Offset 180 " group.long 0x8B8++0x03 line.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO187 ,CPU Targets Byte Offset 187 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO186 ,CPU Targets Byte Offset 186 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO185 ,CPU Targets Byte Offset 185 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO184 ,CPU Targets Byte Offset 184 " group.long 0x8BC++0x03 line.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO191 ,CPU Targets Byte Offset 191 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO190 ,CPU Targets Byte Offset 190 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO189 ,CPU Targets Byte Offset 189 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO188 ,CPU Targets Byte Offset 188 " else hgroup.long 0x8A0++0x03 hide.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40" hgroup.long 0x8A4++0x03 hide.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41" hgroup.long 0x8A8++0x03 hide.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42" hgroup.long 0x8AC++0x03 hide.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43" hgroup.long 0x8B0++0x03 hide.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44" hgroup.long 0x8B4++0x03 hide.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45" hgroup.long 0x8B8++0x03 hide.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46" hgroup.long 0x8BC++0x03 hide.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x06) group.long 0x8C0++0x03 line.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO195 ,CPU Targets Byte Offset 195 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO194 ,CPU Targets Byte Offset 194 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO193 ,CPU Targets Byte Offset 193 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO192 ,CPU Targets Byte Offset 192 " group.long 0x8C4++0x03 line.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO199 ,CPU Targets Byte Offset 199 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO198 ,CPU Targets Byte Offset 198 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO197 ,CPU Targets Byte Offset 197 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO196 ,CPU Targets Byte Offset 196 " group.long 0x8C8++0x03 line.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO203 ,CPU Targets Byte Offset 203 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO202 ,CPU Targets Byte Offset 202 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO201 ,CPU Targets Byte Offset 201 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO200 ,CPU Targets Byte Offset 200 " group.long 0x8CC++0x03 line.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO207 ,CPU Targets Byte Offset 207 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO206 ,CPU Targets Byte Offset 206 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO205 ,CPU Targets Byte Offset 205 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO204 ,CPU Targets Byte Offset 204 " group.long 0x8D0++0x03 line.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO211 ,CPU Targets Byte Offset 211 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO210 ,CPU Targets Byte Offset 210 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO209 ,CPU Targets Byte Offset 209 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO208 ,CPU Targets Byte Offset 208 " group.long 0x8D4++0x03 line.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO215 ,CPU Targets Byte Offset 215 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO214 ,CPU Targets Byte Offset 214 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO213 ,CPU Targets Byte Offset 213 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO212 ,CPU Targets Byte Offset 212 " group.long 0x8D8++0x03 line.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO219 ,CPU Targets Byte Offset 219 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO218 ,CPU Targets Byte Offset 218 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO217 ,CPU Targets Byte Offset 217 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO216 ,CPU Targets Byte Offset 216 " group.long 0x8DC++0x03 line.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO223 ,CPU Targets Byte Offset 223 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO222 ,CPU Targets Byte Offset 222 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO221 ,CPU Targets Byte Offset 221 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO220 ,CPU Targets Byte Offset 220 " else hgroup.long 0x8C0++0x03 hide.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48" hgroup.long 0x8C4++0x03 hide.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49" hgroup.long 0x8C8++0x03 hide.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50" hgroup.long 0x8CC++0x03 hide.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51" hgroup.long 0x8D0++0x03 hide.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52" hgroup.long 0x8D4++0x03 hide.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53" hgroup.long 0x8D8++0x03 hide.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54" hgroup.long 0x8DC++0x03 hide.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x07) group.long 0x8E0++0x03 line.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO227 ,CPU Targets Byte Offset 227 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO226 ,CPU Targets Byte Offset 226 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO225 ,CPU Targets Byte Offset 225 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO224 ,CPU Targets Byte Offset 224 " group.long 0x8E4++0x03 line.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO231 ,CPU Targets Byte Offset 231 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO230 ,CPU Targets Byte Offset 230 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO229 ,CPU Targets Byte Offset 229 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO228 ,CPU Targets Byte Offset 228 " group.long 0x8E8++0x03 line.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO235 ,CPU Targets Byte Offset 235 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO234 ,CPU Targets Byte Offset 234 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO233 ,CPU Targets Byte Offset 233 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO232 ,CPU Targets Byte Offset 232 " group.long 0x8EC++0x03 line.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO239 ,CPU Targets Byte Offset 239 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO238 ,CPU Targets Byte Offset 238 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO237 ,CPU Targets Byte Offset 237 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO236 ,CPU Targets Byte Offset 236 " group.long 0x8F0++0x03 line.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO243 ,CPU Targets Byte Offset 243 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO242 ,CPU Targets Byte Offset 242 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO241 ,CPU Targets Byte Offset 241 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO240 ,CPU Targets Byte Offset 240 " group.long 0x8F4++0x03 line.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO247 ,CPU Targets Byte Offset 247 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO246 ,CPU Targets Byte Offset 246 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO245 ,CPU Targets Byte Offset 245 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO244 ,CPU Targets Byte Offset 244 " group.long 0x8F8++0x03 line.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO251 ,CPU Targets Byte Offset 251 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO250 ,CPU Targets Byte Offset 250 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO249 ,CPU Targets Byte Offset 249 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO248 ,CPU Targets Byte Offset 248 " group.long 0x8FC++0x03 line.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO255 ,CPU Targets Byte Offset 255 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO254 ,CPU Targets Byte Offset 254 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO253 ,CPU Targets Byte Offset 253 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO252 ,CPU Targets Byte Offset 252 " else hgroup.long 0x8E0++0x03 hide.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56" hgroup.long 0x8E4++0x03 hide.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57" hgroup.long 0x8E8++0x03 hide.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58" hgroup.long 0x8EC++0x03 hide.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59" hgroup.long 0x8F0++0x03 hide.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60" hgroup.long 0x8F4++0x03 hide.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61" hgroup.long 0x8F8++0x03 hide.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62" hgroup.long 0x8FC++0x03 hide.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x08) group.long 0x900++0x03 line.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO259 ,CPU Targets Byte Offset 259 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO258 ,CPU Targets Byte Offset 258 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO257 ,CPU Targets Byte Offset 257 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO256 ,CPU Targets Byte Offset 256 " group.long 0x904++0x03 line.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO263 ,CPU Targets Byte Offset 263 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO262 ,CPU Targets Byte Offset 262 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO261 ,CPU Targets Byte Offset 261 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO260 ,CPU Targets Byte Offset 260 " group.long 0x908++0x03 line.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO267 ,CPU Targets Byte Offset 267 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO266 ,CPU Targets Byte Offset 266 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO265 ,CPU Targets Byte Offset 265 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO264 ,CPU Targets Byte Offset 264 " group.long 0x90C++0x03 line.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO271 ,CPU Targets Byte Offset 271 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO270 ,CPU Targets Byte Offset 270 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO269 ,CPU Targets Byte Offset 269 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO268 ,CPU Targets Byte Offset 268 " group.long 0x910++0x03 line.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO275 ,CPU Targets Byte Offset 275 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO274 ,CPU Targets Byte Offset 274 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO273 ,CPU Targets Byte Offset 273 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO272 ,CPU Targets Byte Offset 272 " group.long 0x914++0x03 line.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO279 ,CPU Targets Byte Offset 279 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO278 ,CPU Targets Byte Offset 278 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO277 ,CPU Targets Byte Offset 277 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO276 ,CPU Targets Byte Offset 276 " group.long 0x918++0x03 line.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO283 ,CPU Targets Byte Offset 283 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO282 ,CPU Targets Byte Offset 282 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO281 ,CPU Targets Byte Offset 281 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO280 ,CPU Targets Byte Offset 280 " group.long 0x91C++0x03 line.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO287 ,CPU Targets Byte Offset 287 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO286 ,CPU Targets Byte Offset 286 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO285 ,CPU Targets Byte Offset 285 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO284 ,CPU Targets Byte Offset 284 " else hgroup.long 0x900++0x03 hide.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64" hgroup.long 0x904++0x03 hide.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65" hgroup.long 0x908++0x03 hide.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66" hgroup.long 0x90C++0x03 hide.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67" hgroup.long 0x910++0x03 hide.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68" hgroup.long 0x914++0x03 hide.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69" hgroup.long 0x918++0x03 hide.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70" hgroup.long 0x91C++0x03 hide.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x09) group.long 0x920++0x03 line.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO291 ,CPU Targets Byte Offset 291 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO290 ,CPU Targets Byte Offset 290 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO289 ,CPU Targets Byte Offset 289 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO288 ,CPU Targets Byte Offset 288 " group.long 0x924++0x03 line.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO295 ,CPU Targets Byte Offset 295 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO294 ,CPU Targets Byte Offset 294 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO293 ,CPU Targets Byte Offset 293 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO292 ,CPU Targets Byte Offset 292 " group.long 0x928++0x03 line.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO299 ,CPU Targets Byte Offset 299 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO298 ,CPU Targets Byte Offset 298 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO297 ,CPU Targets Byte Offset 297 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO296 ,CPU Targets Byte Offset 296 " group.long 0x92C++0x03 line.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO303 ,CPU Targets Byte Offset 303 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO302 ,CPU Targets Byte Offset 302 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO301 ,CPU Targets Byte Offset 301 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO300 ,CPU Targets Byte Offset 300 " group.long 0x930++0x03 line.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO307 ,CPU Targets Byte Offset 307 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO306 ,CPU Targets Byte Offset 306 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO305 ,CPU Targets Byte Offset 305 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO304 ,CPU Targets Byte Offset 304 " group.long 0x934++0x03 line.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO311 ,CPU Targets Byte Offset 311 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO310 ,CPU Targets Byte Offset 310 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO309 ,CPU Targets Byte Offset 309 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO308 ,CPU Targets Byte Offset 308 " group.long 0x938++0x03 line.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO315 ,CPU Targets Byte Offset 315 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO314 ,CPU Targets Byte Offset 314 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO313 ,CPU Targets Byte Offset 313 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO312 ,CPU Targets Byte Offset 312 " group.long 0x93C++0x03 line.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO319 ,CPU Targets Byte Offset 319 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO318 ,CPU Targets Byte Offset 318 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO317 ,CPU Targets Byte Offset 317 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO316 ,CPU Targets Byte Offset 316 " else hgroup.long 0x920++0x03 hide.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72" hgroup.long 0x924++0x03 hide.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73" hgroup.long 0x928++0x03 hide.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74" hgroup.long 0x92C++0x03 hide.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75" hgroup.long 0x930++0x03 hide.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76" hgroup.long 0x934++0x03 hide.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77" hgroup.long 0x938++0x03 hide.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78" hgroup.long 0x93C++0x03 hide.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0A) group.long 0x940++0x03 line.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO323 ,CPU Targets Byte Offset 323 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO322 ,CPU Targets Byte Offset 322 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO321 ,CPU Targets Byte Offset 321 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO320 ,CPU Targets Byte Offset 320 " group.long 0x944++0x03 line.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO327 ,CPU Targets Byte Offset 327 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO326 ,CPU Targets Byte Offset 326 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO325 ,CPU Targets Byte Offset 325 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO324 ,CPU Targets Byte Offset 324 " group.long 0x948++0x03 line.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO331 ,CPU Targets Byte Offset 331 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO330 ,CPU Targets Byte Offset 330 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO329 ,CPU Targets Byte Offset 329 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO328 ,CPU Targets Byte Offset 328 " group.long 0x94C++0x03 line.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO335 ,CPU Targets Byte Offset 335 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO334 ,CPU Targets Byte Offset 334 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO333 ,CPU Targets Byte Offset 333 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO332 ,CPU Targets Byte Offset 332 " group.long 0x950++0x03 line.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO339 ,CPU Targets Byte Offset 339 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO338 ,CPU Targets Byte Offset 338 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO337 ,CPU Targets Byte Offset 337 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO336 ,CPU Targets Byte Offset 336 " group.long 0x954++0x03 line.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO343 ,CPU Targets Byte Offset 343 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO342 ,CPU Targets Byte Offset 342 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO341 ,CPU Targets Byte Offset 341 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO340 ,CPU Targets Byte Offset 340 " group.long 0x958++0x03 line.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO347 ,CPU Targets Byte Offset 347 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO346 ,CPU Targets Byte Offset 346 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO345 ,CPU Targets Byte Offset 345 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO344 ,CPU Targets Byte Offset 344 " group.long 0x95C++0x03 line.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO351 ,CPU Targets Byte Offset 351 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO350 ,CPU Targets Byte Offset 350 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO349 ,CPU Targets Byte Offset 349 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO348 ,CPU Targets Byte Offset 348 " else hgroup.long 0x940++0x03 hide.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80" hgroup.long 0x944++0x03 hide.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81" hgroup.long 0x948++0x03 hide.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82" hgroup.long 0x94C++0x03 hide.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83" hgroup.long 0x950++0x03 hide.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84" hgroup.long 0x954++0x03 hide.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85" hgroup.long 0x958++0x03 hide.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86" hgroup.long 0x95C++0x03 hide.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0B) group.long 0x960++0x03 line.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO355 ,CPU Targets Byte Offset 355 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO354 ,CPU Targets Byte Offset 354 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO353 ,CPU Targets Byte Offset 353 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO352 ,CPU Targets Byte Offset 352 " group.long 0x964++0x03 line.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO359 ,CPU Targets Byte Offset 359 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO358 ,CPU Targets Byte Offset 358 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO357 ,CPU Targets Byte Offset 357 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO356 ,CPU Targets Byte Offset 356 " group.long 0x968++0x03 line.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO363 ,CPU Targets Byte Offset 363 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO362 ,CPU Targets Byte Offset 362 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO361 ,CPU Targets Byte Offset 361 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO360 ,CPU Targets Byte Offset 360 " group.long 0x96C++0x03 line.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO367 ,CPU Targets Byte Offset 367 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO366 ,CPU Targets Byte Offset 366 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO365 ,CPU Targets Byte Offset 365 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO364 ,CPU Targets Byte Offset 364 " group.long 0x970++0x03 line.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO371 ,CPU Targets Byte Offset 371 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO370 ,CPU Targets Byte Offset 370 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO369 ,CPU Targets Byte Offset 369 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO368 ,CPU Targets Byte Offset 368 " group.long 0x974++0x03 line.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO375 ,CPU Targets Byte Offset 375 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO374 ,CPU Targets Byte Offset 374 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO373 ,CPU Targets Byte Offset 373 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO372 ,CPU Targets Byte Offset 372 " group.long 0x978++0x03 line.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO379 ,CPU Targets Byte Offset 379 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO378 ,CPU Targets Byte Offset 378 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO377 ,CPU Targets Byte Offset 377 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO376 ,CPU Targets Byte Offset 376 " group.long 0x97C++0x03 line.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO383 ,CPU Targets Byte Offset 383 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO382 ,CPU Targets Byte Offset 382 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO381 ,CPU Targets Byte Offset 381 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO380 ,CPU Targets Byte Offset 380 " else hgroup.long 0x960++0x03 hide.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88" hgroup.long 0x964++0x03 hide.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89" hgroup.long 0x968++0x03 hide.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90" hgroup.long 0x96C++0x03 hide.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91" hgroup.long 0x970++0x03 hide.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92" hgroup.long 0x974++0x03 hide.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93" hgroup.long 0x978++0x03 hide.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94" hgroup.long 0x97C++0x03 hide.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0C) group.long 0x980++0x03 line.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO387 ,CPU Targets Byte Offset 387 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO386 ,CPU Targets Byte Offset 386 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO385 ,CPU Targets Byte Offset 385 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO384 ,CPU Targets Byte Offset 384 " group.long 0x984++0x03 line.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO391 ,CPU Targets Byte Offset 391 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO390 ,CPU Targets Byte Offset 390 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO389 ,CPU Targets Byte Offset 389 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO388 ,CPU Targets Byte Offset 388 " group.long 0x988++0x03 line.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO395 ,CPU Targets Byte Offset 395 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO394 ,CPU Targets Byte Offset 394 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO393 ,CPU Targets Byte Offset 393 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO392 ,CPU Targets Byte Offset 392 " group.long 0x98C++0x03 line.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO399 ,CPU Targets Byte Offset 399 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO398 ,CPU Targets Byte Offset 398 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO397 ,CPU Targets Byte Offset 397 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO396 ,CPU Targets Byte Offset 396 " group.long 0x990++0x03 line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO403 ,CPU Targets Byte Offset 403 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO402 ,CPU Targets Byte Offset 402 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO401 ,CPU Targets Byte Offset 401 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO400 ,CPU Targets Byte Offset 400 " group.long 0x994++0x03 line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO407 ,CPU Targets Byte Offset 407 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO406 ,CPU Targets Byte Offset 406 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO405 ,CPU Targets Byte Offset 405 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO404 ,CPU Targets Byte Offset 404 " group.long 0x998++0x03 line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO411 ,CPU Targets Byte Offset 411 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO410 ,CPU Targets Byte Offset 410 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO409 ,CPU Targets Byte Offset 409 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO408 ,CPU Targets Byte Offset 408 " group.long 0x99C++0x03 line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO415 ,CPU Targets Byte Offset 415 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO414 ,CPU Targets Byte Offset 414 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO413 ,CPU Targets Byte Offset 413 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO412 ,CPU Targets Byte Offset 412 " else hgroup.long 0x980++0x03 hide.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96" hgroup.long 0x984++0x03 hide.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97" hgroup.long 0x988++0x03 hide.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98" hgroup.long 0x98C++0x03 hide.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99" hgroup.long 0x990++0x03 hide.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hgroup.long 0x994++0x03 hide.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hgroup.long 0x998++0x03 hide.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hgroup.long 0x99C++0x03 hide.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0D) group.long 0x9A0++0x03 line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO419 ,CPU Targets Byte Offset 419 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO418 ,CPU Targets Byte Offset 418 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO417 ,CPU Targets Byte Offset 417 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO416 ,CPU Targets Byte Offset 416 " group.long 0x9A4++0x03 line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO423 ,CPU Targets Byte Offset 423 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO422 ,CPU Targets Byte Offset 422 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO421 ,CPU Targets Byte Offset 421 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO420 ,CPU Targets Byte Offset 420 " group.long 0x9A8++0x03 line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO427 ,CPU Targets Byte Offset 427 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO426 ,CPU Targets Byte Offset 426 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO425 ,CPU Targets Byte Offset 425 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO424 ,CPU Targets Byte Offset 424 " group.long 0x9AC++0x03 line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO431 ,CPU Targets Byte Offset 431 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO430 ,CPU Targets Byte Offset 430 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO429 ,CPU Targets Byte Offset 429 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO428 ,CPU Targets Byte Offset 428 " group.long 0x9B0++0x03 line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO435 ,CPU Targets Byte Offset 435 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO434 ,CPU Targets Byte Offset 434 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO433 ,CPU Targets Byte Offset 433 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO432 ,CPU Targets Byte Offset 432 " group.long 0x9B4++0x03 line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO439 ,CPU Targets Byte Offset 439 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO438 ,CPU Targets Byte Offset 438 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO437 ,CPU Targets Byte Offset 437 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO436 ,CPU Targets Byte Offset 436 " group.long 0x9B8++0x03 line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO443 ,CPU Targets Byte Offset 443 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO442 ,CPU Targets Byte Offset 442 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO441 ,CPU Targets Byte Offset 441 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO440 ,CPU Targets Byte Offset 440 " group.long 0x9BC++0x03 line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO447 ,CPU Targets Byte Offset 447 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO446 ,CPU Targets Byte Offset 446 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO445 ,CPU Targets Byte Offset 445 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO444 ,CPU Targets Byte Offset 444 " else hgroup.long 0x9A0++0x03 hide.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hgroup.long 0x9A4++0x03 hide.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hgroup.long 0x9A8++0x03 hide.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hgroup.long 0x9AC++0x03 hide.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hgroup.long 0x9B0++0x03 hide.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hgroup.long 0x9B4++0x03 hide.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hgroup.long 0x9B8++0x03 hide.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hgroup.long 0x9BC++0x03 hide.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0E) group.long 0x9C0++0x03 line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO451 ,CPU Targets Byte Offset 451 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO450 ,CPU Targets Byte Offset 450 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO449 ,CPU Targets Byte Offset 449 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO448 ,CPU Targets Byte Offset 448 " group.long 0x9C4++0x03 line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO455 ,CPU Targets Byte Offset 455 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO454 ,CPU Targets Byte Offset 454 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO453 ,CPU Targets Byte Offset 453 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO452 ,CPU Targets Byte Offset 452 " group.long 0x9C8++0x03 line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO459 ,CPU Targets Byte Offset 459 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO458 ,CPU Targets Byte Offset 458 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO457 ,CPU Targets Byte Offset 457 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO456 ,CPU Targets Byte Offset 456 " group.long 0x9CC++0x03 line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO463 ,CPU Targets Byte Offset 463 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO462 ,CPU Targets Byte Offset 462 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO461 ,CPU Targets Byte Offset 461 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO460 ,CPU Targets Byte Offset 460 " group.long 0x9D0++0x03 line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO467 ,CPU Targets Byte Offset 467 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO466 ,CPU Targets Byte Offset 466 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO465 ,CPU Targets Byte Offset 465 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO464 ,CPU Targets Byte Offset 464 " group.long 0x9D4++0x03 line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO471 ,CPU Targets Byte Offset 471 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO470 ,CPU Targets Byte Offset 470 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO469 ,CPU Targets Byte Offset 469 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO468 ,CPU Targets Byte Offset 468 " group.long 0x9D8++0x03 line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO475 ,CPU Targets Byte Offset 475 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO474 ,CPU Targets Byte Offset 474 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO473 ,CPU Targets Byte Offset 473 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO472 ,CPU Targets Byte Offset 472 " group.long 0x9DC++0x03 line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO479 ,CPU Targets Byte Offset 479 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO478 ,CPU Targets Byte Offset 478 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO477 ,CPU Targets Byte Offset 477 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO476 ,CPU Targets Byte Offset 476 " else hgroup.long 0x9C0++0x03 hide.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hgroup.long 0x9C4++0x03 hide.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hgroup.long 0x9C8++0x03 hide.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hgroup.long 0x9CC++0x03 hide.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hgroup.long 0x9D0++0x03 hide.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hgroup.long 0x9D4++0x03 hide.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hgroup.long 0x9D8++0x03 hide.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hgroup.long 0x9DC++0x03 hide.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0F) group.long 0x9E0++0x03 line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO483 ,CPU Targets Byte Offset 483 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO482 ,CPU Targets Byte Offset 482 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO481 ,CPU Targets Byte Offset 481 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO480 ,CPU Targets Byte Offset 480 " group.long 0x9E4++0x03 line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO487 ,CPU Targets Byte Offset 487 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO486 ,CPU Targets Byte Offset 486 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO485 ,CPU Targets Byte Offset 485 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO484 ,CPU Targets Byte Offset 484 " group.long 0x9E8++0x03 line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO491 ,CPU Targets Byte Offset 491 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO490 ,CPU Targets Byte Offset 490 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO489 ,CPU Targets Byte Offset 489 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO488 ,CPU Targets Byte Offset 488 " group.long 0x9EC++0x03 line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO495 ,CPU Targets Byte Offset 495 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO494 ,CPU Targets Byte Offset 494 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO493 ,CPU Targets Byte Offset 493 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO492 ,CPU Targets Byte Offset 492 " group.long 0x9F0++0x03 line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO499 ,CPU Targets Byte Offset 499 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO498 ,CPU Targets Byte Offset 498 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO497 ,CPU Targets Byte Offset 497 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO496 ,CPU Targets Byte Offset 496 " group.long 0x9F4++0x03 line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO503 ,CPU Targets Byte Offset 503 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO502 ,CPU Targets Byte Offset 502 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO501 ,CPU Targets Byte Offset 501 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO500 ,CPU Targets Byte Offset 500 " group.long 0x9F8++0x03 line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO507 ,CPU Targets Byte Offset 507 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO506 ,CPU Targets Byte Offset 506 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO505 ,CPU Targets Byte Offset 505 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO504 ,CPU Targets Byte Offset 504 " group.long 0x9FC++0x03 line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO511 ,CPU Targets Byte Offset 511 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO510 ,CPU Targets Byte Offset 510 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO509 ,CPU Targets Byte Offset 509 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO508 ,CPU Targets Byte Offset 508 " else hgroup.long 0x9E0++0x03 hide.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hgroup.long 0x9E4++0x03 hide.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hgroup.long 0x9E8++0x03 hide.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hgroup.long 0x9EC++0x03 hide.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hgroup.long 0x9F0++0x03 hide.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hgroup.long 0x9F4++0x03 hide.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hgroup.long 0x9F8++0x03 hide.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hgroup.long 0x9FC++0x03 hide.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x10) group.long 0xA00++0x03 line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO515 ,CPU Targets Byte Offset 515 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO514 ,CPU Targets Byte Offset 514 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO513 ,CPU Targets Byte Offset 513 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO512 ,CPU Targets Byte Offset 512 " group.long 0xA04++0x03 line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO519 ,CPU Targets Byte Offset 519 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO518 ,CPU Targets Byte Offset 518 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO517 ,CPU Targets Byte Offset 517 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO516 ,CPU Targets Byte Offset 516 " group.long 0xA08++0x03 line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO523 ,CPU Targets Byte Offset 523 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO522 ,CPU Targets Byte Offset 522 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO521 ,CPU Targets Byte Offset 521 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO520 ,CPU Targets Byte Offset 520 " group.long 0xA0C++0x03 line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO527 ,CPU Targets Byte Offset 527 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO526 ,CPU Targets Byte Offset 526 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO525 ,CPU Targets Byte Offset 525 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO524 ,CPU Targets Byte Offset 524 " group.long 0xA10++0x03 line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO531 ,CPU Targets Byte Offset 531 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO530 ,CPU Targets Byte Offset 530 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO529 ,CPU Targets Byte Offset 529 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO528 ,CPU Targets Byte Offset 528 " group.long 0xA14++0x03 line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO535 ,CPU Targets Byte Offset 535 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO534 ,CPU Targets Byte Offset 534 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO533 ,CPU Targets Byte Offset 533 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO532 ,CPU Targets Byte Offset 532 " group.long 0xA18++0x03 line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO539 ,CPU Targets Byte Offset 539 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO538 ,CPU Targets Byte Offset 538 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO537 ,CPU Targets Byte Offset 537 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO536 ,CPU Targets Byte Offset 536 " group.long 0xA1C++0x03 line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO543 ,CPU Targets Byte Offset 543 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO542 ,CPU Targets Byte Offset 542 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO541 ,CPU Targets Byte Offset 541 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO540 ,CPU Targets Byte Offset 540 " else hgroup.long 0xA00++0x03 hide.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hgroup.long 0xA04++0x03 hide.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hgroup.long 0xA08++0x03 hide.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hgroup.long 0xA0C++0x03 hide.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hgroup.long 0xA10++0x03 hide.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hgroup.long 0xA14++0x03 hide.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hgroup.long 0xA18++0x03 hide.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hgroup.long 0xA1C++0x03 hide.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x11) group.long 0xA20++0x03 line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO547 ,CPU Targets Byte Offset 547 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO546 ,CPU Targets Byte Offset 546 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO545 ,CPU Targets Byte Offset 545 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO544 ,CPU Targets Byte Offset 544 " group.long 0xA24++0x03 line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO551 ,CPU Targets Byte Offset 551 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO550 ,CPU Targets Byte Offset 550 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO549 ,CPU Targets Byte Offset 549 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO548 ,CPU Targets Byte Offset 548 " group.long 0xA28++0x03 line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO555 ,CPU Targets Byte Offset 555 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO554 ,CPU Targets Byte Offset 554 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO553 ,CPU Targets Byte Offset 553 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO552 ,CPU Targets Byte Offset 552 " group.long 0xA2C++0x03 line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO559 ,CPU Targets Byte Offset 559 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO558 ,CPU Targets Byte Offset 558 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO557 ,CPU Targets Byte Offset 557 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO556 ,CPU Targets Byte Offset 556 " group.long 0xA30++0x03 line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO563 ,CPU Targets Byte Offset 563 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO562 ,CPU Targets Byte Offset 562 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO561 ,CPU Targets Byte Offset 561 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO560 ,CPU Targets Byte Offset 560 " group.long 0xA34++0x03 line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO567 ,CPU Targets Byte Offset 567 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO566 ,CPU Targets Byte Offset 566 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO565 ,CPU Targets Byte Offset 565 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO564 ,CPU Targets Byte Offset 564 " group.long 0xA38++0x03 line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO571 ,CPU Targets Byte Offset 571 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO570 ,CPU Targets Byte Offset 570 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO569 ,CPU Targets Byte Offset 569 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO568 ,CPU Targets Byte Offset 568 " group.long 0xA3C++0x03 line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO575 ,CPU Targets Byte Offset 575 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO574 ,CPU Targets Byte Offset 574 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO573 ,CPU Targets Byte Offset 573 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO572 ,CPU Targets Byte Offset 572 " else hgroup.long 0xA20++0x03 hide.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hgroup.long 0xA24++0x03 hide.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hgroup.long 0xA28++0x03 hide.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hgroup.long 0xA2C++0x03 hide.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hgroup.long 0xA30++0x03 hide.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hgroup.long 0xA34++0x03 hide.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hgroup.long 0xA38++0x03 hide.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hgroup.long 0xA3C++0x03 hide.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x12) group.long 0xA40++0x03 line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO579 ,CPU Targets Byte Offset 579 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO578 ,CPU Targets Byte Offset 578 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO577 ,CPU Targets Byte Offset 577 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO576 ,CPU Targets Byte Offset 576 " group.long 0xA44++0x03 line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO583 ,CPU Targets Byte Offset 583 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO582 ,CPU Targets Byte Offset 582 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO581 ,CPU Targets Byte Offset 581 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO580 ,CPU Targets Byte Offset 580 " group.long 0xA48++0x03 line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO587 ,CPU Targets Byte Offset 587 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO586 ,CPU Targets Byte Offset 586 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO585 ,CPU Targets Byte Offset 585 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO584 ,CPU Targets Byte Offset 584 " group.long 0xA4C++0x03 line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO591 ,CPU Targets Byte Offset 591 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO590 ,CPU Targets Byte Offset 590 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO589 ,CPU Targets Byte Offset 589 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO588 ,CPU Targets Byte Offset 588 " group.long 0xA50++0x03 line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO595 ,CPU Targets Byte Offset 595 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO594 ,CPU Targets Byte Offset 594 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO593 ,CPU Targets Byte Offset 593 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO592 ,CPU Targets Byte Offset 592 " group.long 0xA54++0x03 line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO599 ,CPU Targets Byte Offset 599 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO598 ,CPU Targets Byte Offset 598 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO597 ,CPU Targets Byte Offset 597 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO596 ,CPU Targets Byte Offset 596 " group.long 0xA58++0x03 line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO603 ,CPU Targets Byte Offset 603 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO602 ,CPU Targets Byte Offset 602 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO601 ,CPU Targets Byte Offset 601 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO600 ,CPU Targets Byte Offset 600 " group.long 0xA5C++0x03 line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO607 ,CPU Targets Byte Offset 607 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO606 ,CPU Targets Byte Offset 606 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO605 ,CPU Targets Byte Offset 605 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO604 ,CPU Targets Byte Offset 604 " else hgroup.long 0xA40++0x03 hide.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hgroup.long 0xA44++0x03 hide.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hgroup.long 0xA48++0x03 hide.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hgroup.long 0xA4C++0x03 hide.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hgroup.long 0xA50++0x03 hide.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hgroup.long 0xA54++0x03 hide.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hgroup.long 0xA58++0x03 hide.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hgroup.long 0xA5C++0x03 hide.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x13) group.long 0xA60++0x03 line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO611 ,CPU Targets Byte Offset 611 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO610 ,CPU Targets Byte Offset 610 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO609 ,CPU Targets Byte Offset 609 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO608 ,CPU Targets Byte Offset 608 " group.long 0xA64++0x03 line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO615 ,CPU Targets Byte Offset 615 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO614 ,CPU Targets Byte Offset 614 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO613 ,CPU Targets Byte Offset 613 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO612 ,CPU Targets Byte Offset 612 " group.long 0xA68++0x03 line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO619 ,CPU Targets Byte Offset 619 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO618 ,CPU Targets Byte Offset 618 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO617 ,CPU Targets Byte Offset 617 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO616 ,CPU Targets Byte Offset 616 " group.long 0xA6C++0x03 line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO623 ,CPU Targets Byte Offset 623 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO622 ,CPU Targets Byte Offset 622 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO621 ,CPU Targets Byte Offset 621 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO620 ,CPU Targets Byte Offset 620 " group.long 0xA70++0x03 line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO627 ,CPU Targets Byte Offset 627 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO626 ,CPU Targets Byte Offset 626 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO625 ,CPU Targets Byte Offset 625 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO624 ,CPU Targets Byte Offset 624 " group.long 0xA74++0x03 line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO631 ,CPU Targets Byte Offset 631 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO630 ,CPU Targets Byte Offset 630 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO629 ,CPU Targets Byte Offset 629 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO628 ,CPU Targets Byte Offset 628 " group.long 0xA78++0x03 line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO635 ,CPU Targets Byte Offset 635 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO634 ,CPU Targets Byte Offset 634 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO633 ,CPU Targets Byte Offset 633 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO632 ,CPU Targets Byte Offset 632 " group.long 0xA7C++0x03 line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO639 ,CPU Targets Byte Offset 639 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO638 ,CPU Targets Byte Offset 638 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO637 ,CPU Targets Byte Offset 637 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO636 ,CPU Targets Byte Offset 636 " else hgroup.long 0xA60++0x03 hide.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hgroup.long 0xA64++0x03 hide.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hgroup.long 0xA68++0x03 hide.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hgroup.long 0xA6C++0x03 hide.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hgroup.long 0xA70++0x03 hide.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hgroup.long 0xA74++0x03 hide.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hgroup.long 0xA78++0x03 hide.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hgroup.long 0xA7C++0x03 hide.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x14) group.long 0xA80++0x03 line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO643 ,CPU Targets Byte Offset 643 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO642 ,CPU Targets Byte Offset 642 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO641 ,CPU Targets Byte Offset 641 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO640 ,CPU Targets Byte Offset 640 " group.long 0xA84++0x03 line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO647 ,CPU Targets Byte Offset 647 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO646 ,CPU Targets Byte Offset 646 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO645 ,CPU Targets Byte Offset 645 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO644 ,CPU Targets Byte Offset 644 " group.long 0xA88++0x03 line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO651 ,CPU Targets Byte Offset 651 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO650 ,CPU Targets Byte Offset 650 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO649 ,CPU Targets Byte Offset 649 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO648 ,CPU Targets Byte Offset 648 " group.long 0xA8C++0x03 line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO655 ,CPU Targets Byte Offset 655 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO654 ,CPU Targets Byte Offset 654 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO653 ,CPU Targets Byte Offset 653 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO652 ,CPU Targets Byte Offset 652 " group.long 0xA90++0x03 line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO659 ,CPU Targets Byte Offset 659 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO658 ,CPU Targets Byte Offset 658 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO657 ,CPU Targets Byte Offset 657 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO656 ,CPU Targets Byte Offset 656 " group.long 0xA94++0x03 line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO663 ,CPU Targets Byte Offset 663 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO662 ,CPU Targets Byte Offset 662 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO661 ,CPU Targets Byte Offset 661 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO660 ,CPU Targets Byte Offset 660 " group.long 0xA98++0x03 line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO667 ,CPU Targets Byte Offset 667 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO666 ,CPU Targets Byte Offset 666 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO665 ,CPU Targets Byte Offset 665 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO664 ,CPU Targets Byte Offset 664 " group.long 0xA9C++0x03 line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO671 ,CPU Targets Byte Offset 671 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO670 ,CPU Targets Byte Offset 670 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO669 ,CPU Targets Byte Offset 669 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO668 ,CPU Targets Byte Offset 668 " else hgroup.long 0xA80++0x03 hide.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hgroup.long 0xA84++0x03 hide.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hgroup.long 0xA88++0x03 hide.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hgroup.long 0xA8C++0x03 hide.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hgroup.long 0xA90++0x03 hide.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hgroup.long 0xA94++0x03 hide.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hgroup.long 0xA98++0x03 hide.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hgroup.long 0xA9C++0x03 hide.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x15) group.long 0xAA0++0x03 line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO675 ,CPU Targets Byte Offset 675 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO674 ,CPU Targets Byte Offset 674 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO673 ,CPU Targets Byte Offset 673 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO672 ,CPU Targets Byte Offset 672 " group.long 0xAA4++0x03 line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO679 ,CPU Targets Byte Offset 679 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO678 ,CPU Targets Byte Offset 678 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO677 ,CPU Targets Byte Offset 677 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO676 ,CPU Targets Byte Offset 676 " group.long 0xAA8++0x03 line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO683 ,CPU Targets Byte Offset 683 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO682 ,CPU Targets Byte Offset 682 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO681 ,CPU Targets Byte Offset 681 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO680 ,CPU Targets Byte Offset 680 " group.long 0xAAC++0x03 line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO687 ,CPU Targets Byte Offset 687 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO686 ,CPU Targets Byte Offset 686 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO685 ,CPU Targets Byte Offset 685 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO684 ,CPU Targets Byte Offset 684 " group.long 0xAB0++0x03 line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO691 ,CPU Targets Byte Offset 691 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO690 ,CPU Targets Byte Offset 690 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO689 ,CPU Targets Byte Offset 689 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO688 ,CPU Targets Byte Offset 688 " group.long 0xAB4++0x03 line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO695 ,CPU Targets Byte Offset 695 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO694 ,CPU Targets Byte Offset 694 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO693 ,CPU Targets Byte Offset 693 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO692 ,CPU Targets Byte Offset 692 " group.long 0xAB8++0x03 line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO699 ,CPU Targets Byte Offset 699 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO698 ,CPU Targets Byte Offset 698 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO697 ,CPU Targets Byte Offset 697 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO696 ,CPU Targets Byte Offset 696 " group.long 0xABC++0x03 line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO703 ,CPU Targets Byte Offset 703 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO702 ,CPU Targets Byte Offset 702 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO701 ,CPU Targets Byte Offset 701 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO700 ,CPU Targets Byte Offset 700 " else hgroup.long 0xAA0++0x03 hide.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hgroup.long 0xAA4++0x03 hide.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hgroup.long 0xAA8++0x03 hide.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hgroup.long 0xAAC++0x03 hide.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hgroup.long 0xAB0++0x03 hide.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hgroup.long 0xAB4++0x03 hide.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hgroup.long 0xAB8++0x03 hide.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hgroup.long 0xABC++0x03 hide.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x16) group.long 0xAC0++0x03 line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO707 ,CPU Targets Byte Offset 707 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO706 ,CPU Targets Byte Offset 706 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO705 ,CPU Targets Byte Offset 705 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO704 ,CPU Targets Byte Offset 704 " group.long 0xAC4++0x03 line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO711 ,CPU Targets Byte Offset 711 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO710 ,CPU Targets Byte Offset 710 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO709 ,CPU Targets Byte Offset 709 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO708 ,CPU Targets Byte Offset 708 " group.long 0xAC8++0x03 line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO715 ,CPU Targets Byte Offset 715 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO714 ,CPU Targets Byte Offset 714 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO713 ,CPU Targets Byte Offset 713 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO712 ,CPU Targets Byte Offset 712 " group.long 0xACC++0x03 line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO719 ,CPU Targets Byte Offset 719 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO718 ,CPU Targets Byte Offset 718 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO717 ,CPU Targets Byte Offset 717 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO716 ,CPU Targets Byte Offset 716 " group.long 0xAD0++0x03 line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO723 ,CPU Targets Byte Offset 723 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO722 ,CPU Targets Byte Offset 722 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO721 ,CPU Targets Byte Offset 721 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO720 ,CPU Targets Byte Offset 720 " group.long 0xAD4++0x03 line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO727 ,CPU Targets Byte Offset 727 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO726 ,CPU Targets Byte Offset 726 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO725 ,CPU Targets Byte Offset 725 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO724 ,CPU Targets Byte Offset 724 " group.long 0xAD8++0x03 line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO731 ,CPU Targets Byte Offset 731 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO730 ,CPU Targets Byte Offset 730 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO729 ,CPU Targets Byte Offset 729 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO728 ,CPU Targets Byte Offset 728 " group.long 0xADC++0x03 line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO735 ,CPU Targets Byte Offset 735 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO734 ,CPU Targets Byte Offset 734 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO733 ,CPU Targets Byte Offset 733 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO732 ,CPU Targets Byte Offset 732 " else hgroup.long 0xAC0++0x03 hide.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hgroup.long 0xAC4++0x03 hide.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hgroup.long 0xAC8++0x03 hide.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hgroup.long 0xACC++0x03 hide.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hgroup.long 0xAD0++0x03 hide.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hgroup.long 0xAD4++0x03 hide.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hgroup.long 0xAD8++0x03 hide.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hgroup.long 0xADC++0x03 hide.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x17) group.long 0xAE0++0x03 line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO739 ,CPU Targets Byte Offset 739 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO738 ,CPU Targets Byte Offset 738 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO737 ,CPU Targets Byte Offset 737 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO736 ,CPU Targets Byte Offset 736 " group.long 0xAE4++0x03 line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO743 ,CPU Targets Byte Offset 743 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO742 ,CPU Targets Byte Offset 742 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO741 ,CPU Targets Byte Offset 741 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO740 ,CPU Targets Byte Offset 740 " group.long 0xAE8++0x03 line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO747 ,CPU Targets Byte Offset 747 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO746 ,CPU Targets Byte Offset 746 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO745 ,CPU Targets Byte Offset 745 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO744 ,CPU Targets Byte Offset 744 " group.long 0xAEC++0x03 line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO751 ,CPU Targets Byte Offset 751 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO750 ,CPU Targets Byte Offset 750 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO749 ,CPU Targets Byte Offset 749 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO748 ,CPU Targets Byte Offset 748 " group.long 0xAF0++0x03 line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO755 ,CPU Targets Byte Offset 755 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO754 ,CPU Targets Byte Offset 754 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO753 ,CPU Targets Byte Offset 753 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO752 ,CPU Targets Byte Offset 752 " group.long 0xAF4++0x03 line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO759 ,CPU Targets Byte Offset 759 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO758 ,CPU Targets Byte Offset 758 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO757 ,CPU Targets Byte Offset 757 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO756 ,CPU Targets Byte Offset 756 " group.long 0xAF8++0x03 line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO763 ,CPU Targets Byte Offset 763 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO762 ,CPU Targets Byte Offset 762 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO761 ,CPU Targets Byte Offset 761 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO760 ,CPU Targets Byte Offset 760 " group.long 0xAFC++0x03 line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO767 ,CPU Targets Byte Offset 767 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO766 ,CPU Targets Byte Offset 766 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO765 ,CPU Targets Byte Offset 765 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO764 ,CPU Targets Byte Offset 764 " else hgroup.long 0xAE0++0x03 hide.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hgroup.long 0xAE4++0x03 hide.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hgroup.long 0xAE8++0x03 hide.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hgroup.long 0xAEC++0x03 hide.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hgroup.long 0xAF0++0x03 hide.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hgroup.long 0xAF4++0x03 hide.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hgroup.long 0xAF8++0x03 hide.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hgroup.long 0xAFC++0x03 hide.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x18) group.long 0xB00++0x03 line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO771 ,CPU Targets Byte Offset 771 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO770 ,CPU Targets Byte Offset 770 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO769 ,CPU Targets Byte Offset 769 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO768 ,CPU Targets Byte Offset 768 " group.long 0xB04++0x03 line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO775 ,CPU Targets Byte Offset 775 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO774 ,CPU Targets Byte Offset 774 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO773 ,CPU Targets Byte Offset 773 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO772 ,CPU Targets Byte Offset 772 " group.long 0xB08++0x03 line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO779 ,CPU Targets Byte Offset 779 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO778 ,CPU Targets Byte Offset 778 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO777 ,CPU Targets Byte Offset 777 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO776 ,CPU Targets Byte Offset 776 " group.long 0xB0C++0x03 line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO783 ,CPU Targets Byte Offset 783 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO782 ,CPU Targets Byte Offset 782 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO781 ,CPU Targets Byte Offset 781 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO780 ,CPU Targets Byte Offset 780 " group.long 0xB10++0x03 line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO787 ,CPU Targets Byte Offset 787 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO786 ,CPU Targets Byte Offset 786 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO785 ,CPU Targets Byte Offset 785 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO784 ,CPU Targets Byte Offset 784 " group.long 0xB14++0x03 line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO791 ,CPU Targets Byte Offset 791 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO790 ,CPU Targets Byte Offset 790 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO789 ,CPU Targets Byte Offset 789 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO788 ,CPU Targets Byte Offset 788 " group.long 0xB18++0x03 line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO795 ,CPU Targets Byte Offset 795 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO794 ,CPU Targets Byte Offset 794 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO793 ,CPU Targets Byte Offset 793 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO792 ,CPU Targets Byte Offset 792 " group.long 0xB1C++0x03 line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO799 ,CPU Targets Byte Offset 799 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO798 ,CPU Targets Byte Offset 798 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO797 ,CPU Targets Byte Offset 797 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO796 ,CPU Targets Byte Offset 796 " else hgroup.long 0xB00++0x03 hide.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hgroup.long 0xB04++0x03 hide.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hgroup.long 0xB08++0x03 hide.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hgroup.long 0xB0C++0x03 hide.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hgroup.long 0xB10++0x03 hide.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hgroup.long 0xB14++0x03 hide.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hgroup.long 0xB18++0x03 hide.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hgroup.long 0xB1C++0x03 hide.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x19) group.long 0xB20++0x03 line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO803 ,CPU Targets Byte Offset 803 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO802 ,CPU Targets Byte Offset 802 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO801 ,CPU Targets Byte Offset 801 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO800 ,CPU Targets Byte Offset 800 " group.long 0xB24++0x03 line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO807 ,CPU Targets Byte Offset 807 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO806 ,CPU Targets Byte Offset 806 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO805 ,CPU Targets Byte Offset 805 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO804 ,CPU Targets Byte Offset 804 " group.long 0xB28++0x03 line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO811 ,CPU Targets Byte Offset 811 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO810 ,CPU Targets Byte Offset 810 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO809 ,CPU Targets Byte Offset 809 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO808 ,CPU Targets Byte Offset 808 " group.long 0xB2C++0x03 line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO815 ,CPU Targets Byte Offset 815 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO814 ,CPU Targets Byte Offset 814 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO813 ,CPU Targets Byte Offset 813 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO812 ,CPU Targets Byte Offset 812 " group.long 0xB30++0x03 line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO819 ,CPU Targets Byte Offset 819 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO818 ,CPU Targets Byte Offset 818 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO817 ,CPU Targets Byte Offset 817 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO816 ,CPU Targets Byte Offset 816 " group.long 0xB34++0x03 line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO823 ,CPU Targets Byte Offset 823 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO822 ,CPU Targets Byte Offset 822 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO821 ,CPU Targets Byte Offset 821 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO820 ,CPU Targets Byte Offset 820 " group.long 0xB38++0x03 line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO827 ,CPU Targets Byte Offset 827 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO826 ,CPU Targets Byte Offset 826 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO825 ,CPU Targets Byte Offset 825 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO824 ,CPU Targets Byte Offset 824 " group.long 0xB3C++0x03 line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO831 ,CPU Targets Byte Offset 831 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO830 ,CPU Targets Byte Offset 830 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO829 ,CPU Targets Byte Offset 829 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO828 ,CPU Targets Byte Offset 828 " else hgroup.long 0xB20++0x03 hide.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hgroup.long 0xB24++0x03 hide.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hgroup.long 0xB28++0x03 hide.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hgroup.long 0xB2C++0x03 hide.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hgroup.long 0xB30++0x03 hide.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hgroup.long 0xB34++0x03 hide.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hgroup.long 0xB38++0x03 hide.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hgroup.long 0xB3C++0x03 hide.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1A) group.long 0xB40++0x03 line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO835 ,CPU Targets Byte Offset 835 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO834 ,CPU Targets Byte Offset 834 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO833 ,CPU Targets Byte Offset 833 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO832 ,CPU Targets Byte Offset 832 " group.long 0xB44++0x03 line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO839 ,CPU Targets Byte Offset 839 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO838 ,CPU Targets Byte Offset 838 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO837 ,CPU Targets Byte Offset 837 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO836 ,CPU Targets Byte Offset 836 " group.long 0xB48++0x03 line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO843 ,CPU Targets Byte Offset 843 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO842 ,CPU Targets Byte Offset 842 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO841 ,CPU Targets Byte Offset 841 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO840 ,CPU Targets Byte Offset 840 " group.long 0xB4C++0x03 line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO847 ,CPU Targets Byte Offset 847 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO846 ,CPU Targets Byte Offset 846 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO845 ,CPU Targets Byte Offset 845 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO844 ,CPU Targets Byte Offset 844 " group.long 0xB50++0x03 line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO851 ,CPU Targets Byte Offset 851 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO850 ,CPU Targets Byte Offset 850 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO849 ,CPU Targets Byte Offset 849 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO848 ,CPU Targets Byte Offset 848 " group.long 0xB54++0x03 line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO855 ,CPU Targets Byte Offset 855 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO854 ,CPU Targets Byte Offset 854 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO853 ,CPU Targets Byte Offset 853 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO852 ,CPU Targets Byte Offset 852 " group.long 0xB58++0x03 line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO859 ,CPU Targets Byte Offset 859 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO858 ,CPU Targets Byte Offset 858 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO857 ,CPU Targets Byte Offset 857 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO856 ,CPU Targets Byte Offset 856 " group.long 0xB5C++0x03 line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO863 ,CPU Targets Byte Offset 863 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO862 ,CPU Targets Byte Offset 862 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO861 ,CPU Targets Byte Offset 861 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO860 ,CPU Targets Byte Offset 860 " else hgroup.long 0xB40++0x03 hide.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hgroup.long 0xB44++0x03 hide.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hgroup.long 0xB48++0x03 hide.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hgroup.long 0xB4C++0x03 hide.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hgroup.long 0xB50++0x03 hide.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hgroup.long 0xB54++0x03 hide.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hgroup.long 0xB58++0x03 hide.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hgroup.long 0xB5C++0x03 hide.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1B) group.long 0xB60++0x03 line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO867 ,CPU Targets Byte Offset 867 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO866 ,CPU Targets Byte Offset 866 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO865 ,CPU Targets Byte Offset 865 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO864 ,CPU Targets Byte Offset 864 " group.long 0xB64++0x03 line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO871 ,CPU Targets Byte Offset 871 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO870 ,CPU Targets Byte Offset 870 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO869 ,CPU Targets Byte Offset 869 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO868 ,CPU Targets Byte Offset 868 " group.long 0xB68++0x03 line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO875 ,CPU Targets Byte Offset 875 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO874 ,CPU Targets Byte Offset 874 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO873 ,CPU Targets Byte Offset 873 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO872 ,CPU Targets Byte Offset 872 " group.long 0xB6C++0x03 line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO879 ,CPU Targets Byte Offset 879 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO878 ,CPU Targets Byte Offset 878 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO877 ,CPU Targets Byte Offset 877 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO876 ,CPU Targets Byte Offset 876 " group.long 0xB70++0x03 line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO883 ,CPU Targets Byte Offset 883 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO882 ,CPU Targets Byte Offset 882 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO881 ,CPU Targets Byte Offset 881 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO880 ,CPU Targets Byte Offset 880 " group.long 0xB74++0x03 line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO887 ,CPU Targets Byte Offset 887 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO886 ,CPU Targets Byte Offset 886 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO885 ,CPU Targets Byte Offset 885 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO884 ,CPU Targets Byte Offset 884 " group.long 0xB78++0x03 line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO891 ,CPU Targets Byte Offset 891 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO890 ,CPU Targets Byte Offset 890 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO889 ,CPU Targets Byte Offset 889 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO888 ,CPU Targets Byte Offset 888 " group.long 0xB7C++0x03 line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO895 ,CPU Targets Byte Offset 895 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO894 ,CPU Targets Byte Offset 894 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO893 ,CPU Targets Byte Offset 893 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO892 ,CPU Targets Byte Offset 892 " else hgroup.long 0xB60++0x03 hide.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hgroup.long 0xB64++0x03 hide.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hgroup.long 0xB68++0x03 hide.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hgroup.long 0xB6C++0x03 hide.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hgroup.long 0xB70++0x03 hide.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hgroup.long 0xB74++0x03 hide.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hgroup.long 0xB78++0x03 hide.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hgroup.long 0xB7C++0x03 hide.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1C) group.long 0xB80++0x03 line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO899 ,CPU Targets Byte Offset 899 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO898 ,CPU Targets Byte Offset 898 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO897 ,CPU Targets Byte Offset 897 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO896 ,CPU Targets Byte Offset 896 " group.long 0xB84++0x03 line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO903 ,CPU Targets Byte Offset 903 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO902 ,CPU Targets Byte Offset 902 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO901 ,CPU Targets Byte Offset 901 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO900 ,CPU Targets Byte Offset 900 " group.long 0xB88++0x03 line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO907 ,CPU Targets Byte Offset 907 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO906 ,CPU Targets Byte Offset 906 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO905 ,CPU Targets Byte Offset 905 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO904 ,CPU Targets Byte Offset 904 " group.long 0xB8C++0x03 line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO911 ,CPU Targets Byte Offset 911 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO910 ,CPU Targets Byte Offset 910 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO909 ,CPU Targets Byte Offset 909 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO908 ,CPU Targets Byte Offset 908 " group.long 0xB90++0x03 line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO915 ,CPU Targets Byte Offset 915 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO914 ,CPU Targets Byte Offset 914 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO913 ,CPU Targets Byte Offset 913 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO912 ,CPU Targets Byte Offset 912 " group.long 0xB94++0x03 line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO919 ,CPU Targets Byte Offset 919 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO918 ,CPU Targets Byte Offset 918 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO917 ,CPU Targets Byte Offset 917 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO916 ,CPU Targets Byte Offset 916 " group.long 0xB98++0x03 line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO923 ,CPU Targets Byte Offset 923 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO922 ,CPU Targets Byte Offset 922 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO921 ,CPU Targets Byte Offset 921 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO920 ,CPU Targets Byte Offset 920 " group.long 0xB9C++0x03 line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO927 ,CPU Targets Byte Offset 927 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO926 ,CPU Targets Byte Offset 926 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO925 ,CPU Targets Byte Offset 925 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO924 ,CPU Targets Byte Offset 924 " else hgroup.long 0xB80++0x03 hide.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hgroup.long 0xB84++0x03 hide.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hgroup.long 0xB88++0x03 hide.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hgroup.long 0xB8C++0x03 hide.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hgroup.long 0xB90++0x03 hide.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hgroup.long 0xB94++0x03 hide.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hgroup.long 0xB98++0x03 hide.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hgroup.long 0xB9C++0x03 hide.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1D) group.long 0xBA0++0x03 line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO931 ,CPU Targets Byte Offset 931 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO930 ,CPU Targets Byte Offset 930 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO929 ,CPU Targets Byte Offset 929 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO928 ,CPU Targets Byte Offset 928 " group.long 0xBA4++0x03 line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO935 ,CPU Targets Byte Offset 935 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO934 ,CPU Targets Byte Offset 934 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO933 ,CPU Targets Byte Offset 933 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO932 ,CPU Targets Byte Offset 932 " group.long 0xBA8++0x03 line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO939 ,CPU Targets Byte Offset 939 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO938 ,CPU Targets Byte Offset 938 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO937 ,CPU Targets Byte Offset 937 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO936 ,CPU Targets Byte Offset 936 " group.long 0xBAC++0x03 line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO943 ,CPU Targets Byte Offset 943 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO942 ,CPU Targets Byte Offset 942 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO941 ,CPU Targets Byte Offset 941 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO940 ,CPU Targets Byte Offset 940 " group.long 0xBB0++0x03 line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO947 ,CPU Targets Byte Offset 947 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO946 ,CPU Targets Byte Offset 946 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO945 ,CPU Targets Byte Offset 945 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO944 ,CPU Targets Byte Offset 944 " group.long 0xBB4++0x03 line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO951 ,CPU Targets Byte Offset 951 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO950 ,CPU Targets Byte Offset 950 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO949 ,CPU Targets Byte Offset 949 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO948 ,CPU Targets Byte Offset 948 " group.long 0xBB8++0x03 line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO955 ,CPU Targets Byte Offset 955 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO954 ,CPU Targets Byte Offset 954 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO953 ,CPU Targets Byte Offset 953 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO952 ,CPU Targets Byte Offset 952 " group.long 0xBBC++0x03 line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO959 ,CPU Targets Byte Offset 959 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO958 ,CPU Targets Byte Offset 958 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO957 ,CPU Targets Byte Offset 957 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO956 ,CPU Targets Byte Offset 956 " else hgroup.long 0xBA0++0x03 hide.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hgroup.long 0xBA4++0x03 hide.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hgroup.long 0xBA8++0x03 hide.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hgroup.long 0xBAC++0x03 hide.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hgroup.long 0xBB0++0x03 hide.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hgroup.long 0xBB4++0x03 hide.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hgroup.long 0xBB8++0x03 hide.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hgroup.long 0xBBC++0x03 hide.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1E) group.long 0xBC0++0x03 line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO963 ,CPU Targets Byte Offset 963 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO962 ,CPU Targets Byte Offset 962 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO961 ,CPU Targets Byte Offset 961 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO960 ,CPU Targets Byte Offset 960 " group.long 0xBC4++0x03 line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO967 ,CPU Targets Byte Offset 967 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO966 ,CPU Targets Byte Offset 966 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO965 ,CPU Targets Byte Offset 965 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO964 ,CPU Targets Byte Offset 964 " group.long 0xBC8++0x03 line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO971 ,CPU Targets Byte Offset 971 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO970 ,CPU Targets Byte Offset 970 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO969 ,CPU Targets Byte Offset 969 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO968 ,CPU Targets Byte Offset 968 " group.long 0xBCC++0x03 line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO975 ,CPU Targets Byte Offset 975 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO974 ,CPU Targets Byte Offset 974 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO973 ,CPU Targets Byte Offset 973 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO972 ,CPU Targets Byte Offset 972 " group.long 0xBD0++0x03 line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO979 ,CPU Targets Byte Offset 979 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO978 ,CPU Targets Byte Offset 978 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO977 ,CPU Targets Byte Offset 977 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO976 ,CPU Targets Byte Offset 976 " group.long 0xBD4++0x03 line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO983 ,CPU Targets Byte Offset 983 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO982 ,CPU Targets Byte Offset 982 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO981 ,CPU Targets Byte Offset 981 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO980 ,CPU Targets Byte Offset 980 " group.long 0xBD8++0x03 line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO987 ,CPU Targets Byte Offset 987 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO986 ,CPU Targets Byte Offset 986 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO985 ,CPU Targets Byte Offset 985 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO984 ,CPU Targets Byte Offset 984 " group.long 0xBDC++0x03 line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO991 ,CPU Targets Byte Offset 991 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO990 ,CPU Targets Byte Offset 990 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO989 ,CPU Targets Byte Offset 989 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO988 ,CPU Targets Byte Offset 988 " else hgroup.long 0xBC0++0x03 hide.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hgroup.long 0xBC4++0x03 hide.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hgroup.long 0xBC8++0x03 hide.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hgroup.long 0xBCC++0x03 hide.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hgroup.long 0xBD0++0x03 hide.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hgroup.long 0xBD4++0x03 hide.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hgroup.long 0xBD8++0x03 hide.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hgroup.long 0xBDC++0x03 hide.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1F) group.long 0xBE0++0x03 line.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO995 ,CPU Targets Byte Offset 995 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO994 ,CPU Targets Byte Offset 994 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO993 ,CPU Targets Byte Offset 993 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO992 ,CPU Targets Byte Offset 992 " group.long 0xBE4++0x03 line.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO999 ,CPU Targets Byte Offset 999 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO998 ,CPU Targets Byte Offset 998 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO997 ,CPU Targets Byte Offset 997 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO996 ,CPU Targets Byte Offset 996 " group.long 0xBE8++0x03 line.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1003 ,CPU Targets Byte Offset 1003" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1002 ,CPU Targets Byte Offset 1002" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1001 ,CPU Targets Byte Offset 1001" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1000 ,CPU Targets Byte Offset 1000" group.long 0xBEC++0x03 line.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1007 ,CPU Targets Byte Offset 1007" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1006 ,CPU Targets Byte Offset 1006" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1005 ,CPU Targets Byte Offset 1005" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1004 ,CPU Targets Byte Offset 1004" group.long 0xBF0++0x03 line.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1011 ,CPU Targets Byte Offset 1011" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1010 ,CPU Targets Byte Offset 1010" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1009 ,CPU Targets Byte Offset 1009" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1008 ,CPU Targets Byte Offset 1008" group.long 0xBF4++0x03 line.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1015 ,CPU Targets Byte Offset 1015" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1014 ,CPU Targets Byte Offset 1014" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1013 ,CPU Targets Byte Offset 1013" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1012 ,CPU Targets Byte Offset 1012" group.long 0xBF8++0x03 line.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1019 ,CPU Targets Byte Offset 1019" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1018 ,CPU Targets Byte Offset 1018" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1017 ,CPU Targets Byte Offset 1017" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1016 ,CPU Targets Byte Offset 1016" else hgroup.long 0xBE0++0x03 hide.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248" hgroup.long 0xBE4++0x03 hide.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249" hgroup.long 0xBE8++0x03 hide.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250" hgroup.long 0xBEC++0x03 hide.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251" hgroup.long 0xBF0++0x03 hide.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252" hgroup.long 0xBF4++0x03 hide.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253" hgroup.long 0xBF8++0x03 hide.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254" endif else hgroup.long 0x800++0x03 hide.long 0x00 "GICD_ITARGETSR0 ,Interrupt Processor Targets Register 0 " hgroup.long 0x804++0x03 hide.long 0x00 "GICD_ITARGETSR1 ,Interrupt Processor Targets Register 1 " hgroup.long 0x808++0x03 hide.long 0x00 "GICD_ITARGETSR2 ,Interrupt Processor Targets Register 2 " hgroup.long 0x80C++0x03 hide.long 0x00 "GICD_ITARGETSR3 ,Interrupt Processor Targets Register 3 " hgroup.long 0x810++0x03 hide.long 0x00 "GICD_ITARGETSR4 ,Interrupt Processor Targets Register 4 " hgroup.long 0x814++0x03 hide.long 0x00 "GICD_ITARGETSR5 ,Interrupt Processor Targets Register 5 " hgroup.long 0x818++0x03 hide.long 0x00 "GICD_ITARGETSR6 ,Interrupt Processor Targets Register 6 " hgroup.long 0x81C++0x03 hide.long 0x00 "GICD_ITARGETSR7 ,Interrupt Processor Targets Register 7 " hgroup.long 0x820++0x03 hide.long 0x00 "GICD_ITARGETSR8 ,Interrupt Processor Targets Register 8 " hgroup.long 0x824++0x03 hide.long 0x00 "GICD_ITARGETSR9 ,Interrupt Processor Targets Register 9 " hgroup.long 0x828++0x03 hide.long 0x00 "GICD_ITARGETSR10 ,Interrupt Processor Targets Register 10 " hgroup.long 0x82C++0x03 hide.long 0x00 "GICD_ITARGETSR11 ,Interrupt Processor Targets Register 11 " hgroup.long 0x830++0x03 hide.long 0x00 "GICD_ITARGETSR12 ,Interrupt Processor Targets Register 12 " hgroup.long 0x834++0x03 hide.long 0x00 "GICD_ITARGETSR13 ,Interrupt Processor Targets Register 13 " hgroup.long 0x838++0x03 hide.long 0x00 "GICD_ITARGETSR14 ,Interrupt Processor Targets Register 14 " hgroup.long 0x83C++0x03 hide.long 0x00 "GICD_ITARGETSR15 ,Interrupt Processor Targets Register 15 " hgroup.long 0x840++0x03 hide.long 0x00 "GICD_ITARGETSR16 ,Interrupt Processor Targets Register 16 " hgroup.long 0x844++0x03 hide.long 0x00 "GICD_ITARGETSR17 ,Interrupt Processor Targets Register 17 " hgroup.long 0x848++0x03 hide.long 0x00 "GICD_ITARGETSR18 ,Interrupt Processor Targets Register 18 " hgroup.long 0x84C++0x03 hide.long 0x00 "GICD_ITARGETSR19 ,Interrupt Processor Targets Register 19 " hgroup.long 0x850++0x03 hide.long 0x00 "GICD_ITARGETSR20 ,Interrupt Processor Targets Register 20 " hgroup.long 0x854++0x03 hide.long 0x00 "GICD_ITARGETSR21 ,Interrupt Processor Targets Register 21 " hgroup.long 0x858++0x03 hide.long 0x00 "GICD_ITARGETSR22 ,Interrupt Processor Targets Register 22 " hgroup.long 0x85C++0x03 hide.long 0x00 "GICD_ITARGETSR23 ,Interrupt Processor Targets Register 23 " hgroup.long 0x860++0x03 hide.long 0x00 "GICD_ITARGETSR24 ,Interrupt Processor Targets Register 24 " hgroup.long 0x864++0x03 hide.long 0x00 "GICD_ITARGETSR25 ,Interrupt Processor Targets Register 25 " hgroup.long 0x868++0x03 hide.long 0x00 "GICD_ITARGETSR26 ,Interrupt Processor Targets Register 26 " hgroup.long 0x86C++0x03 hide.long 0x00 "GICD_ITARGETSR27 ,Interrupt Processor Targets Register 27 " hgroup.long 0x870++0x03 hide.long 0x00 "GICD_ITARGETSR28 ,Interrupt Processor Targets Register 28 " hgroup.long 0x874++0x03 hide.long 0x00 "GICD_ITARGETSR29 ,Interrupt Processor Targets Register 29 " hgroup.long 0x878++0x03 hide.long 0x00 "GICD_ITARGETSR30 ,Interrupt Processor Targets Register 30 " hgroup.long 0x87C++0x03 hide.long 0x00 "GICD_ITARGETSR31 ,Interrupt Processor Targets Register 31 " hgroup.long 0x880++0x03 hide.long 0x00 "GICD_ITARGETSR32 ,Interrupt Processor Targets Register 32 " hgroup.long 0x884++0x03 hide.long 0x00 "GICD_ITARGETSR33 ,Interrupt Processor Targets Register 33 " hgroup.long 0x888++0x03 hide.long 0x00 "GICD_ITARGETSR34 ,Interrupt Processor Targets Register 34 " hgroup.long 0x88C++0x03 hide.long 0x00 "GICD_ITARGETSR35 ,Interrupt Processor Targets Register 35 " hgroup.long 0x890++0x03 hide.long 0x00 "GICD_ITARGETSR36 ,Interrupt Processor Targets Register 36 " hgroup.long 0x894++0x03 hide.long 0x00 "GICD_ITARGETSR37 ,Interrupt Processor Targets Register 37 " hgroup.long 0x898++0x03 hide.long 0x00 "GICD_ITARGETSR38 ,Interrupt Processor Targets Register 38 " hgroup.long 0x89C++0x03 hide.long 0x00 "GICD_ITARGETSR39 ,Interrupt Processor Targets Register 39 " hgroup.long 0x8A0++0x03 hide.long 0x00 "GICD_ITARGETSR40 ,Interrupt Processor Targets Register 40 " hgroup.long 0x8A4++0x03 hide.long 0x00 "GICD_ITARGETSR41 ,Interrupt Processor Targets Register 41 " hgroup.long 0x8A8++0x03 hide.long 0x00 "GICD_ITARGETSR42 ,Interrupt Processor Targets Register 42 " hgroup.long 0x8AC++0x03 hide.long 0x00 "GICD_ITARGETSR43 ,Interrupt Processor Targets Register 43 " hgroup.long 0x8B0++0x03 hide.long 0x00 "GICD_ITARGETSR44 ,Interrupt Processor Targets Register 44 " hgroup.long 0x8B4++0x03 hide.long 0x00 "GICD_ITARGETSR45 ,Interrupt Processor Targets Register 45 " hgroup.long 0x8B8++0x03 hide.long 0x00 "GICD_ITARGETSR46 ,Interrupt Processor Targets Register 46 " hgroup.long 0x8BC++0x03 hide.long 0x00 "GICD_ITARGETSR47 ,Interrupt Processor Targets Register 47 " hgroup.long 0x8C0++0x03 hide.long 0x00 "GICD_ITARGETSR48 ,Interrupt Processor Targets Register 48 " hgroup.long 0x8C4++0x03 hide.long 0x00 "GICD_ITARGETSR49 ,Interrupt Processor Targets Register 49 " hgroup.long 0x8C8++0x03 hide.long 0x00 "GICD_ITARGETSR50 ,Interrupt Processor Targets Register 50 " hgroup.long 0x8CC++0x03 hide.long 0x00 "GICD_ITARGETSR51 ,Interrupt Processor Targets Register 51 " hgroup.long 0x8D0++0x03 hide.long 0x00 "GICD_ITARGETSR52 ,Interrupt Processor Targets Register 52 " hgroup.long 0x8D4++0x03 hide.long 0x00 "GICD_ITARGETSR53 ,Interrupt Processor Targets Register 53 " hgroup.long 0x8D8++0x03 hide.long 0x00 "GICD_ITARGETSR54 ,Interrupt Processor Targets Register 54 " hgroup.long 0x8DC++0x03 hide.long 0x00 "GICD_ITARGETSR55 ,Interrupt Processor Targets Register 55 " hgroup.long 0x8E0++0x03 hide.long 0x00 "GICD_ITARGETSR56 ,Interrupt Processor Targets Register 56 " hgroup.long 0x8E4++0x03 hide.long 0x00 "GICD_ITARGETSR57 ,Interrupt Processor Targets Register 57 " hgroup.long 0x8E8++0x03 hide.long 0x00 "GICD_ITARGETSR58 ,Interrupt Processor Targets Register 58 " hgroup.long 0x8EC++0x03 hide.long 0x00 "GICD_ITARGETSR59 ,Interrupt Processor Targets Register 59 " hgroup.long 0x8F0++0x03 hide.long 0x00 "GICD_ITARGETSR60 ,Interrupt Processor Targets Register 60 " hgroup.long 0x8F4++0x03 hide.long 0x00 "GICD_ITARGETSR61 ,Interrupt Processor Targets Register 61 " hgroup.long 0x8F8++0x03 hide.long 0x00 "GICD_ITARGETSR62 ,Interrupt Processor Targets Register 62 " hgroup.long 0x8FC++0x03 hide.long 0x00 "GICD_ITARGETSR63 ,Interrupt Processor Targets Register 63 " hgroup.long 0x900++0x03 hide.long 0x00 "GICD_ITARGETSR64 ,Interrupt Processor Targets Register 64 " hgroup.long 0x904++0x03 hide.long 0x00 "GICD_ITARGETSR65 ,Interrupt Processor Targets Register 65 " hgroup.long 0x908++0x03 hide.long 0x00 "GICD_ITARGETSR66 ,Interrupt Processor Targets Register 66 " hgroup.long 0x90C++0x03 hide.long 0x00 "GICD_ITARGETSR67 ,Interrupt Processor Targets Register 67 " hgroup.long 0x910++0x03 hide.long 0x00 "GICD_ITARGETSR68 ,Interrupt Processor Targets Register 68 " hgroup.long 0x914++0x03 hide.long 0x00 "GICD_ITARGETSR69 ,Interrupt Processor Targets Register 69 " hgroup.long 0x918++0x03 hide.long 0x00 "GICD_ITARGETSR70 ,Interrupt Processor Targets Register 70 " hgroup.long 0x91C++0x03 hide.long 0x00 "GICD_ITARGETSR71 ,Interrupt Processor Targets Register 71 " hgroup.long 0x920++0x03 hide.long 0x00 "GICD_ITARGETSR72 ,Interrupt Processor Targets Register 72 " hgroup.long 0x924++0x03 hide.long 0x00 "GICD_ITARGETSR73 ,Interrupt Processor Targets Register 73 " hgroup.long 0x928++0x03 hide.long 0x00 "GICD_ITARGETSR74 ,Interrupt Processor Targets Register 74 " hgroup.long 0x92C++0x03 hide.long 0x00 "GICD_ITARGETSR75 ,Interrupt Processor Targets Register 75 " hgroup.long 0x930++0x03 hide.long 0x00 "GICD_ITARGETSR76 ,Interrupt Processor Targets Register 76 " hgroup.long 0x934++0x03 hide.long 0x00 "GICD_ITARGETSR77 ,Interrupt Processor Targets Register 77 " hgroup.long 0x938++0x03 hide.long 0x00 "GICD_ITARGETSR78 ,Interrupt Processor Targets Register 78 " hgroup.long 0x93C++0x03 hide.long 0x00 "GICD_ITARGETSR79 ,Interrupt Processor Targets Register 79 " hgroup.long 0x940++0x03 hide.long 0x00 "GICD_ITARGETSR80 ,Interrupt Processor Targets Register 80 " hgroup.long 0x944++0x03 hide.long 0x00 "GICD_ITARGETSR81 ,Interrupt Processor Targets Register 81 " hgroup.long 0x948++0x03 hide.long 0x00 "GICD_ITARGETSR82 ,Interrupt Processor Targets Register 82 " hgroup.long 0x94C++0x03 hide.long 0x00 "GICD_ITARGETSR83 ,Interrupt Processor Targets Register 83 " hgroup.long 0x950++0x03 hide.long 0x00 "GICD_ITARGETSR84 ,Interrupt Processor Targets Register 84 " hgroup.long 0x954++0x03 hide.long 0x00 "GICD_ITARGETSR85 ,Interrupt Processor Targets Register 85 " hgroup.long 0x958++0x03 hide.long 0x00 "GICD_ITARGETSR86 ,Interrupt Processor Targets Register 86 " hgroup.long 0x95C++0x03 hide.long 0x00 "GICD_ITARGETSR87 ,Interrupt Processor Targets Register 87 " hgroup.long 0x960++0x03 hide.long 0x00 "GICD_ITARGETSR88 ,Interrupt Processor Targets Register 88 " hgroup.long 0x964++0x03 hide.long 0x00 "GICD_ITARGETSR89 ,Interrupt Processor Targets Register 89 " hgroup.long 0x968++0x03 hide.long 0x00 "GICD_ITARGETSR90 ,Interrupt Processor Targets Register 90 " hgroup.long 0x96C++0x03 hide.long 0x00 "GICD_ITARGETSR91 ,Interrupt Processor Targets Register 91 " hgroup.long 0x970++0x03 hide.long 0x00 "GICD_ITARGETSR92 ,Interrupt Processor Targets Register 92 " hgroup.long 0x974++0x03 hide.long 0x00 "GICD_ITARGETSR93 ,Interrupt Processor Targets Register 93 " hgroup.long 0x978++0x03 hide.long 0x00 "GICD_ITARGETSR94 ,Interrupt Processor Targets Register 94 " hgroup.long 0x97C++0x03 hide.long 0x00 "GICD_ITARGETSR95 ,Interrupt Processor Targets Register 95 " hgroup.long 0x980++0x03 hide.long 0x00 "GICD_ITARGETSR96 ,Interrupt Processor Targets Register 96 " hgroup.long 0x984++0x03 hide.long 0x00 "GICD_ITARGETSR97 ,Interrupt Processor Targets Register 97 " hgroup.long 0x988++0x03 hide.long 0x00 "GICD_ITARGETSR98 ,Interrupt Processor Targets Register 98 " hgroup.long 0x98C++0x03 hide.long 0x00 "GICD_ITARGETSR99 ,Interrupt Processor Targets Register 99 " hgroup.long 0x990++0x03 hide.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hgroup.long 0x994++0x03 hide.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hgroup.long 0x998++0x03 hide.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hgroup.long 0x99C++0x03 hide.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" hgroup.long 0x9A0++0x03 hide.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hgroup.long 0x9A4++0x03 hide.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hgroup.long 0x9A8++0x03 hide.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hgroup.long 0x9AC++0x03 hide.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hgroup.long 0x9B0++0x03 hide.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hgroup.long 0x9B4++0x03 hide.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hgroup.long 0x9B8++0x03 hide.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hgroup.long 0x9BC++0x03 hide.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" hgroup.long 0x9C0++0x03 hide.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hgroup.long 0x9C4++0x03 hide.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hgroup.long 0x9C8++0x03 hide.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hgroup.long 0x9CC++0x03 hide.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hgroup.long 0x9D0++0x03 hide.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hgroup.long 0x9D4++0x03 hide.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hgroup.long 0x9D8++0x03 hide.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hgroup.long 0x9DC++0x03 hide.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" hgroup.long 0x9E0++0x03 hide.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hgroup.long 0x9E4++0x03 hide.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hgroup.long 0x9E8++0x03 hide.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hgroup.long 0x9EC++0x03 hide.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hgroup.long 0x9F0++0x03 hide.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hgroup.long 0x9F4++0x03 hide.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hgroup.long 0x9F8++0x03 hide.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hgroup.long 0x9FC++0x03 hide.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" hgroup.long 0xA00++0x03 hide.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hgroup.long 0xA04++0x03 hide.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hgroup.long 0xA08++0x03 hide.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hgroup.long 0xA0C++0x03 hide.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hgroup.long 0xA10++0x03 hide.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hgroup.long 0xA14++0x03 hide.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hgroup.long 0xA18++0x03 hide.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hgroup.long 0xA1C++0x03 hide.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" hgroup.long 0xA20++0x03 hide.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hgroup.long 0xA24++0x03 hide.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hgroup.long 0xA28++0x03 hide.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hgroup.long 0xA2C++0x03 hide.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hgroup.long 0xA30++0x03 hide.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hgroup.long 0xA34++0x03 hide.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hgroup.long 0xA38++0x03 hide.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hgroup.long 0xA3C++0x03 hide.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" hgroup.long 0xA40++0x03 hide.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hgroup.long 0xA44++0x03 hide.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hgroup.long 0xA48++0x03 hide.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hgroup.long 0xA4C++0x03 hide.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hgroup.long 0xA50++0x03 hide.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hgroup.long 0xA54++0x03 hide.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hgroup.long 0xA58++0x03 hide.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hgroup.long 0xA5C++0x03 hide.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" hgroup.long 0xA60++0x03 hide.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hgroup.long 0xA64++0x03 hide.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hgroup.long 0xA68++0x03 hide.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hgroup.long 0xA6C++0x03 hide.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hgroup.long 0xA70++0x03 hide.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hgroup.long 0xA74++0x03 hide.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hgroup.long 0xA78++0x03 hide.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hgroup.long 0xA7C++0x03 hide.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" hgroup.long 0xA80++0x03 hide.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hgroup.long 0xA84++0x03 hide.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hgroup.long 0xA88++0x03 hide.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hgroup.long 0xA8C++0x03 hide.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hgroup.long 0xA90++0x03 hide.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hgroup.long 0xA94++0x03 hide.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hgroup.long 0xA98++0x03 hide.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hgroup.long 0xA9C++0x03 hide.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" hgroup.long 0xAA0++0x03 hide.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hgroup.long 0xAA4++0x03 hide.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hgroup.long 0xAA8++0x03 hide.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hgroup.long 0xAAC++0x03 hide.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hgroup.long 0xAB0++0x03 hide.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hgroup.long 0xAB4++0x03 hide.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hgroup.long 0xAB8++0x03 hide.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hgroup.long 0xABC++0x03 hide.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" hgroup.long 0xAC0++0x03 hide.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hgroup.long 0xAC4++0x03 hide.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hgroup.long 0xAC8++0x03 hide.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hgroup.long 0xACC++0x03 hide.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hgroup.long 0xAD0++0x03 hide.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hgroup.long 0xAD4++0x03 hide.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hgroup.long 0xAD8++0x03 hide.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hgroup.long 0xADC++0x03 hide.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" hgroup.long 0xAE0++0x03 hide.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hgroup.long 0xAE4++0x03 hide.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hgroup.long 0xAE8++0x03 hide.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hgroup.long 0xAEC++0x03 hide.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hgroup.long 0xAF0++0x03 hide.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hgroup.long 0xAF4++0x03 hide.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hgroup.long 0xAF8++0x03 hide.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hgroup.long 0xAFC++0x03 hide.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" hgroup.long 0xB00++0x03 hide.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hgroup.long 0xB04++0x03 hide.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hgroup.long 0xB08++0x03 hide.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hgroup.long 0xB0C++0x03 hide.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hgroup.long 0xB10++0x03 hide.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hgroup.long 0xB14++0x03 hide.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hgroup.long 0xB18++0x03 hide.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hgroup.long 0xB1C++0x03 hide.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" hgroup.long 0xB20++0x03 hide.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hgroup.long 0xB24++0x03 hide.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hgroup.long 0xB28++0x03 hide.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hgroup.long 0xB2C++0x03 hide.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hgroup.long 0xB30++0x03 hide.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hgroup.long 0xB34++0x03 hide.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hgroup.long 0xB38++0x03 hide.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hgroup.long 0xB3C++0x03 hide.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" hgroup.long 0xB40++0x03 hide.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hgroup.long 0xB44++0x03 hide.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hgroup.long 0xB48++0x03 hide.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hgroup.long 0xB4C++0x03 hide.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hgroup.long 0xB50++0x03 hide.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hgroup.long 0xB54++0x03 hide.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hgroup.long 0xB58++0x03 hide.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hgroup.long 0xB5C++0x03 hide.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" hgroup.long 0xB60++0x03 hide.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hgroup.long 0xB64++0x03 hide.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hgroup.long 0xB68++0x03 hide.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hgroup.long 0xB6C++0x03 hide.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hgroup.long 0xB70++0x03 hide.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hgroup.long 0xB74++0x03 hide.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hgroup.long 0xB78++0x03 hide.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hgroup.long 0xB7C++0x03 hide.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" hgroup.long 0xB80++0x03 hide.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hgroup.long 0xB84++0x03 hide.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hgroup.long 0xB88++0x03 hide.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hgroup.long 0xB8C++0x03 hide.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hgroup.long 0xB90++0x03 hide.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hgroup.long 0xB94++0x03 hide.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hgroup.long 0xB98++0x03 hide.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hgroup.long 0xB9C++0x03 hide.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" hgroup.long 0xBA0++0x03 hide.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hgroup.long 0xBA4++0x03 hide.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hgroup.long 0xBA8++0x03 hide.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hgroup.long 0xBAC++0x03 hide.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hgroup.long 0xBB0++0x03 hide.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hgroup.long 0xBB4++0x03 hide.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hgroup.long 0xBB8++0x03 hide.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hgroup.long 0xBBC++0x03 hide.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" hgroup.long 0xBC0++0x03 hide.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hgroup.long 0xBC4++0x03 hide.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hgroup.long 0xBC8++0x03 hide.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hgroup.long 0xBCC++0x03 hide.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hgroup.long 0xBD0++0x03 hide.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hgroup.long 0xBD4++0x03 hide.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hgroup.long 0xBD8++0x03 hide.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hgroup.long 0xBDC++0x03 hide.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" hgroup.long 0xBE0++0x03 hide.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248" hgroup.long 0xBE4++0x03 hide.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249" hgroup.long 0xBE8++0x03 hide.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250" hgroup.long 0xBEC++0x03 hide.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251" hgroup.long 0xBF0++0x03 hide.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252" hgroup.long 0xBF4++0x03 hide.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253" hgroup.long 0xBF8++0x03 hide.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254" endif tree.end width 14. tree "Configuration Registers" hgroup.long 0xC00++0x03 hide.long 0x00 "GICD_ICFGR0,Interrupt Configuration Register" textline " " rgroup.long 0xC04++0x03 line.long 0x00 "GICD_ICFGR1,Interrupt Configuration Register" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1) group.long 0xC08++0x03 line.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC0C++0x03 line.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC08++0x03 hide.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2" hgroup.long 0xC0C++0x03 hide.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x2) group.long 0xC10++0x03 line.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC14++0x03 line.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC10++0x03 hide.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4" hgroup.long 0xC14++0x03 hide.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x3) group.long 0xC18++0x03 line.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC1C++0x03 line.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC18++0x03 hide.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6" hgroup.long 0xC1C++0x03 hide.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x4) group.long 0xC20++0x03 line.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC24++0x03 line.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC20++0x03 hide.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8" hgroup.long 0xC24++0x03 hide.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x5) group.long 0xC28++0x03 line.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC2C++0x03 line.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC28++0x03 hide.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10" hgroup.long 0xC2C++0x03 hide.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x6) group.long 0xC30++0x03 line.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC34++0x03 line.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC30++0x03 hide.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12" hgroup.long 0xC34++0x03 hide.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x7) group.long 0xC38++0x03 line.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC3C++0x03 line.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC38++0x03 hide.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14" hgroup.long 0xC3C++0x03 hide.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x8) group.long 0xC40++0x03 line.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC44++0x03 line.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC40++0x03 hide.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16" hgroup.long 0xC44++0x03 hide.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x9) group.long 0xC48++0x03 line.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC4C++0x03 line.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC48++0x03 hide.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18" hgroup.long 0xC4C++0x03 hide.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0xA) group.long 0xC50++0x03 line.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC54++0x03 line.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC50++0x03 hide.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20" hgroup.long 0xC54++0x03 hide.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0xB) group.long 0xC58++0x03 line.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC5C++0x03 line.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC58++0x03 hide.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22" hgroup.long 0xC5C++0x03 hide.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0xC) group.long 0xC60++0x03 line.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC64++0x03 line.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC60++0x03 hide.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24" hgroup.long 0xC64++0x03 hide.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0xD) group.long 0xC68++0x03 line.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC6C++0x03 line.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC68++0x03 hide.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26" hgroup.long 0xC6C++0x03 hide.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0xE) group.long 0xC70++0x03 line.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC74++0x03 line.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC70++0x03 hide.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28" hgroup.long 0xC74++0x03 hide.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0xF) group.long 0xC78++0x03 line.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC7C++0x03 line.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC78++0x03 hide.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30" hgroup.long 0xC7C++0x03 hide.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x10) group.long 0xC80++0x03 line.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC84++0x03 line.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC80++0x03 hide.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32" hgroup.long 0xC84++0x03 hide.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x11) group.long 0xC88++0x03 line.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC8C++0x03 line.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC88++0x03 hide.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34" hgroup.long 0xC8C++0x03 hide.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x12) group.long 0xC90++0x03 line.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC94++0x03 line.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC90++0x03 hide.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36" hgroup.long 0xC94++0x03 hide.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x13) group.long 0xC98++0x03 line.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC9C++0x03 line.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC98++0x03 hide.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38" hgroup.long 0xC9C++0x03 hide.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x14) group.long 0xCA0++0x03 line.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCA4++0x03 line.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCA0++0x03 hide.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40" hgroup.long 0xCA4++0x03 hide.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x15) group.long 0xCA8++0x03 line.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCAC++0x03 line.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCA8++0x03 hide.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42" hgroup.long 0xCAC++0x03 hide.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x16) group.long 0xCB0++0x03 line.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCB4++0x03 line.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCB0++0x03 hide.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44" hgroup.long 0xCB4++0x03 hide.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x17) group.long 0xCB8++0x03 line.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCBC++0x03 line.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCB8++0x03 hide.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46" hgroup.long 0xCBC++0x03 hide.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x18) group.long 0xCC0++0x03 line.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCC4++0x03 line.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCC0++0x03 hide.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48" hgroup.long 0xCC4++0x03 hide.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x19) group.long 0xCC8++0x03 line.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCCC++0x03 line.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCC8++0x03 hide.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50" hgroup.long 0xCCC++0x03 hide.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1A) group.long 0xCD0++0x03 line.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCD4++0x03 line.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCD0++0x03 hide.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52" hgroup.long 0xCD4++0x03 hide.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1B) group.long 0xCD8++0x03 line.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCDC++0x03 line.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCD8++0x03 hide.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54" hgroup.long 0xCDC++0x03 hide.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1C) group.long 0xCE0++0x03 line.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCE4++0x03 line.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCE0++0x03 hide.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56" hgroup.long 0xCE4++0x03 hide.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1D) group.long 0xCE8++0x03 line.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCEC++0x03 line.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCE8++0x03 hide.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58" hgroup.long 0xCEC++0x03 hide.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1E) group.long 0xCF0++0x03 line.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCF4++0x03 line.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCF0++0x03 hide.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60" hgroup.long 0xCF4++0x03 hide.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61" endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1F) group.long 0xCF8++0x03 line.long 0x00 "GICD_ICFGR62,Interrupt Configuration Register 62" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCFC++0x03 line.long 0x00 "GICD_ICFGR63,Interrupt Configuration Register 63" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCF8++0x03 hide.long 0x00 "GICD_ICFGR62,Interrupt Configuration Register 62" hgroup.long 0xCFC++0x03 hide.long 0x00 "GICD_ICFGR63,Interrupt Configuration Register 63" endif tree.end width 12. tree "Peripheral Interrupt Status Registers" rgroup.long 0x0D00++0x03 line.long 0x00 "GICD_PPISR,Private Peripheral Interrupt Status Register" bitfld.long 0x00 15. " PPI_C[15] ,Returns the status of the ppi_c[15] inputs on the Distributor" "Low,High" bitfld.long 0x00 14. " PPI_C[14] ,Returns the status of the ppi_c[14] inputs on the Distributor" "Low,High" bitfld.long 0x00 13. " PPI_C[13] ,Returns the status of the ppi_c[13] inputs on the Distributor" "Low,High" bitfld.long 0x00 12. " PPI_C[12] ,Returns the status of the ppi_c[12] inputs on the Distributor" "Low,High" textline " " bitfld.long 0x00 11. " PPI_C[11] ,Returns the status of the ppi_c[11] inputs on the Distributor" "Low,High" bitfld.long 0x00 10. " PPI_C[10] ,Returns the status of the ppi_c[10] inputs on the Distributor" "Low,High" bitfld.long 0x00 9. " PPI_C[9] ,Returns the status of the ppi_c[9] inputs on the Distributor" "Low,High" bitfld.long 0x00 8. " PPI_C[8] ,Returns the status of the ppi_c[8] inputs on the Distributor" "Low,High" textline " " bitfld.long 0x00 7. " PPI_C[7] ,Returns the status of the ppi_c[7] inputs on the Distributor" "Low,High" bitfld.long 0x00 6. " PPI_C[6] ,Returns the status of the ppi_c[6] inputs on the Distributor" "Low,High" bitfld.long 0x00 5. " PPI_C[5] ,Returns the status of the ppi_c[5] inputs on the Distributor" "Low,High" bitfld.long 0x00 4. " PPI_C[4] ,Returns the status of the ppi_c[4] inputs on the Distributor" "Low,High" textline " " bitfld.long 0x00 3. " PPI_C[3] ,Returns the status of the ppi_c[3] inputs on the Distributor" "Low,High" bitfld.long 0x00 2. " PPI_C[2] ,Returns the status of the ppi_c[2] inputs on the Distributor" "Low,High" bitfld.long 0x00 1. " PPI_C[1] ,Returns the status of the ppi_c[1] inputs on the Distributor" "Low,High" bitfld.long 0x00 0. " PPI_C[0] ,Returns the status of the ppi_c[0] inputs on the Distributor" "Low,High" textline " " width 22. if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x01) rgroup.long 0x0D04++0x03 line.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 0" bitfld.long 0x00 31. " IRQS31 ,IRQS Status Bit 31" "Low,High" bitfld.long 0x00 30. " IRQS30 ,IRQS Status Bit 30" "Low,High" bitfld.long 0x00 29. " IRQS29 ,IRQS Status Bit 29" "Low,High" textline " " bitfld.long 0x00 28. " IRQS28 ,IRQS Status Bit 28" "Low,High" bitfld.long 0x00 27. " IRQS27 ,IRQS Status Bit 27" "Low,High" bitfld.long 0x00 26. " IRQS26 ,IRQS Status Bit 26" "Low,High" textline " " bitfld.long 0x00 25. " IRQS25 ,IRQS Status Bit 25" "Low,High" bitfld.long 0x00 24. " IRQS24 ,IRQS Status Bit 24" "Low,High" bitfld.long 0x00 23. " IRQS23 ,IRQS Status Bit 23" "Low,High" textline " " bitfld.long 0x00 22. " IRQS22 ,IRQS Status Bit 22" "Low,High" bitfld.long 0x00 21. " IRQS21 ,IRQS Status Bit 21" "Low,High" bitfld.long 0x00 20. " IRQS20 ,IRQS Status Bit 20" "Low,High" textline " " bitfld.long 0x00 19. " IRQS19 ,IRQS Status Bit 19" "Low,High" bitfld.long 0x00 18. " IRQS18 ,IRQS Status Bit 18" "Low,High" bitfld.long 0x00 17. " IRQS17 ,IRQS Status Bit 17" "Low,High" textline " " bitfld.long 0x00 16. " IRQS16 ,IRQS Status Bit 16" "Low,High" bitfld.long 0x00 15. " IRQS15 ,IRQS Status Bit 15" "Low,High" bitfld.long 0x00 14. " IRQS14 ,IRQS Status Bit 14" "Low,High" textline " " bitfld.long 0x00 13. " IRQS13 ,IRQS Status Bit 13" "Low,High" bitfld.long 0x00 12. " IRQS12 ,IRQS Status Bit 12" "Low,High" bitfld.long 0x00 11. " IRQS11 ,IRQS Status Bit 11" "Low,High" textline " " bitfld.long 0x00 10. " IRQS10 ,IRQS Status Bit 10" "Low,High" bitfld.long 0x00 9. " IRQS9 ,IRQS Status Bit 9" "Low,High" bitfld.long 0x00 8. " IRQS8 ,IRQS Status Bit 8" "Low,High" textline " " bitfld.long 0x00 7. " IRQS7 ,IRQS Status Bit 7" "Low,High" bitfld.long 0x00 6. " IRQS6 ,IRQS Status Bit 6" "Low,High" bitfld.long 0x00 5. " IRQS5 ,IRQS Status Bit 5" "Low,High" textline " " bitfld.long 0x00 4. " IRQS4 ,IRQS Status Bit 4" "Low,High" bitfld.long 0x00 3. " IRQS3 ,IRQS Status Bit 3" "Low,High" bitfld.long 0x00 2. " IRQS2 ,IRQS Status Bit 2" "Low,High" textline " " bitfld.long 0x00 1. " IRQS1 ,IRQS Status Bit 1" "Low,High" bitfld.long 0x00 0. " IRQS0 ,IRQS Status Bit 0" "Low,High" else hgroup.long 0x0D04++0x03 hide.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x02) rgroup.long 0x0D08++0x03 line.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1" bitfld.long 0x00 31. " IRQS63 ,IRQS Status Bit 63" "Low,High" bitfld.long 0x00 30. " IRQS62 ,IRQS Status Bit 62" "Low,High" bitfld.long 0x00 29. " IRQS61 ,IRQS Status Bit 61" "Low,High" textline " " bitfld.long 0x00 28. " IRQS60 ,IRQS Status Bit 60" "Low,High" bitfld.long 0x00 27. " IRQS59 ,IRQS Status Bit 59" "Low,High" bitfld.long 0x00 26. " IRQS58 ,IRQS Status Bit 58" "Low,High" textline " " bitfld.long 0x00 25. " IRQS57 ,IRQS Status Bit 57" "Low,High" bitfld.long 0x00 24. " IRQS56 ,IRQS Status Bit 56" "Low,High" bitfld.long 0x00 23. " IRQS55 ,IRQS Status Bit 55" "Low,High" textline " " bitfld.long 0x00 22. " IRQS54 ,IRQS Status Bit 54" "Low,High" bitfld.long 0x00 21. " IRQS53 ,IRQS Status Bit 53" "Low,High" bitfld.long 0x00 20. " IRQS52 ,IRQS Status Bit 52" "Low,High" textline " " bitfld.long 0x00 19. " IRQS51 ,IRQS Status Bit 51" "Low,High" bitfld.long 0x00 18. " IRQS50 ,IRQS Status Bit 50" "Low,High" bitfld.long 0x00 17. " IRQS49 ,IRQS Status Bit 49" "Low,High" textline " " bitfld.long 0x00 16. " IRQS48 ,IRQS Status Bit 48" "Low,High" bitfld.long 0x00 15. " IRQS47 ,IRQS Status Bit 47" "Low,High" bitfld.long 0x00 14. " IRQS46 ,IRQS Status Bit 46" "Low,High" textline " " bitfld.long 0x00 13. " IRQS45 ,IRQS Status Bit 45" "Low,High" bitfld.long 0x00 12. " IRQS44 ,IRQS Status Bit 44" "Low,High" bitfld.long 0x00 11. " IRQS43 ,IRQS Status Bit 43" "Low,High" textline " " bitfld.long 0x00 10. " IRQS42 ,IRQS Status Bit 42" "Low,High" bitfld.long 0x00 9. " IRQS41 ,IRQS Status Bit 41" "Low,High" bitfld.long 0x00 8. " IRQS40 ,IRQS Status Bit 40" "Low,High" textline " " bitfld.long 0x00 7. " IRQS39 ,IRQS Status Bit 39" "Low,High" bitfld.long 0x00 6. " IRQS38 ,IRQS Status Bit 38" "Low,High" bitfld.long 0x00 5. " IRQS37 ,IRQS Status Bit 37" "Low,High" textline " " bitfld.long 0x00 4. " IRQS36 ,IRQS Status Bit 36" "Low,High" bitfld.long 0x00 3. " IRQS35 ,IRQS Status Bit 35" "Low,High" bitfld.long 0x00 2. " IRQS34 ,IRQS Status Bit 34" "Low,High" textline " " bitfld.long 0x00 1. " IRQS33 ,IRQS Status Bit 33" "Low,High" bitfld.long 0x00 0. " IRQS32 ,IRQS Status Bit 32" "Low,High" else hgroup.long 0x0D08++0x03 hide.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x03) rgroup.long 0x0D0C++0x03 line.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2" bitfld.long 0x00 31. " IRQS95 ,IRQS Status Bit 95" "Low,High" bitfld.long 0x00 30. " IRQS94 ,IRQS Status Bit 94" "Low,High" bitfld.long 0x00 29. " IRQS93 ,IRQS Status Bit 93" "Low,High" textline " " bitfld.long 0x00 28. " IRQS92 ,IRQS Status Bit 92" "Low,High" bitfld.long 0x00 27. " IRQS91 ,IRQS Status Bit 91" "Low,High" bitfld.long 0x00 26. " IRQS90 ,IRQS Status Bit 90" "Low,High" textline " " bitfld.long 0x00 25. " IRQS89 ,IRQS Status Bit 89" "Low,High" bitfld.long 0x00 24. " IRQS88 ,IRQS Status Bit 88" "Low,High" bitfld.long 0x00 23. " IRQS87 ,IRQS Status Bit 87" "Low,High" textline " " bitfld.long 0x00 22. " IRQS86 ,IRQS Status Bit 86" "Low,High" bitfld.long 0x00 21. " IRQS85 ,IRQS Status Bit 85" "Low,High" bitfld.long 0x00 20. " IRQS84 ,IRQS Status Bit 84" "Low,High" textline " " bitfld.long 0x00 19. " IRQS83 ,IRQS Status Bit 83" "Low,High" bitfld.long 0x00 18. " IRQS82 ,IRQS Status Bit 82" "Low,High" bitfld.long 0x00 17. " IRQS81 ,IRQS Status Bit 81" "Low,High" textline " " bitfld.long 0x00 16. " IRQS80 ,IRQS Status Bit 80" "Low,High" bitfld.long 0x00 15. " IRQS79 ,IRQS Status Bit 79" "Low,High" bitfld.long 0x00 14. " IRQS78 ,IRQS Status Bit 78" "Low,High" textline " " bitfld.long 0x00 13. " IRQS77 ,IRQS Status Bit 77" "Low,High" bitfld.long 0x00 12. " IRQS76 ,IRQS Status Bit 76" "Low,High" bitfld.long 0x00 11. " IRQS75 ,IRQS Status Bit 75" "Low,High" textline " " bitfld.long 0x00 10. " IRQS74 ,IRQS Status Bit 74" "Low,High" bitfld.long 0x00 9. " IRQS73 ,IRQS Status Bit 73" "Low,High" bitfld.long 0x00 8. " IRQS72 ,IRQS Status Bit 72" "Low,High" textline " " bitfld.long 0x00 7. " IRQS71 ,IRQS Status Bit 71" "Low,High" bitfld.long 0x00 6. " IRQS70 ,IRQS Status Bit 70" "Low,High" bitfld.long 0x00 5. " IRQS69 ,IRQS Status Bit 69" "Low,High" textline " " bitfld.long 0x00 4. " IRQS68 ,IRQS Status Bit 68" "Low,High" bitfld.long 0x00 3. " IRQS67 ,IRQS Status Bit 67" "Low,High" bitfld.long 0x00 2. " IRQS66 ,IRQS Status Bit 66" "Low,High" textline " " bitfld.long 0x00 1. " IRQS65 ,IRQS Status Bit 65" "Low,High" bitfld.long 0x00 0. " IRQS64 ,IRQS Status Bit 64" "Low,High" else hgroup.long 0x0D0C++0x03 hide.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x04) rgroup.long 0x0D10++0x03 line.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3" bitfld.long 0x00 31. " IRQS127 ,IRQS Status Bit 127" "Low,High" bitfld.long 0x00 30. " IRQS126 ,IRQS Status Bit 126" "Low,High" bitfld.long 0x00 29. " IRQS125 ,IRQS Status Bit 125" "Low,High" textline " " bitfld.long 0x00 28. " IRQS124 ,IRQS Status Bit 124" "Low,High" bitfld.long 0x00 27. " IRQS123 ,IRQS Status Bit 123" "Low,High" bitfld.long 0x00 26. " IRQS122 ,IRQS Status Bit 122" "Low,High" textline " " bitfld.long 0x00 25. " IRQS121 ,IRQS Status Bit 121" "Low,High" bitfld.long 0x00 24. " IRQS120 ,IRQS Status Bit 120" "Low,High" bitfld.long 0x00 23. " IRQS119 ,IRQS Status Bit 119" "Low,High" textline " " bitfld.long 0x00 22. " IRQS118 ,IRQS Status Bit 118" "Low,High" bitfld.long 0x00 21. " IRQS117 ,IRQS Status Bit 117" "Low,High" bitfld.long 0x00 20. " IRQS116 ,IRQS Status Bit 116" "Low,High" textline " " bitfld.long 0x00 19. " IRQS115 ,IRQS Status Bit 115" "Low,High" bitfld.long 0x00 18. " IRQS114 ,IRQS Status Bit 114" "Low,High" bitfld.long 0x00 17. " IRQS113 ,IRQS Status Bit 113" "Low,High" textline " " bitfld.long 0x00 16. " IRQS112 ,IRQS Status Bit 112" "Low,High" bitfld.long 0x00 15. " IRQS111 ,IRQS Status Bit 111" "Low,High" bitfld.long 0x00 14. " IRQS110 ,IRQS Status Bit 110" "Low,High" textline " " bitfld.long 0x00 13. " IRQS109 ,IRQS Status Bit 109" "Low,High" bitfld.long 0x00 12. " IRQS108 ,IRQS Status Bit 108" "Low,High" bitfld.long 0x00 11. " IRQS107 ,IRQS Status Bit 107" "Low,High" textline " " bitfld.long 0x00 10. " IRQS106 ,IRQS Status Bit 106" "Low,High" bitfld.long 0x00 9. " IRQS105 ,IRQS Status Bit 105" "Low,High" bitfld.long 0x00 8. " IRQS104 ,IRQS Status Bit 104" "Low,High" textline " " bitfld.long 0x00 7. " IRQS103 ,IRQS Status Bit 103" "Low,High" bitfld.long 0x00 6. " IRQS102 ,IRQS Status Bit 102" "Low,High" bitfld.long 0x00 5. " IRQS101 ,IRQS Status Bit 101" "Low,High" textline " " bitfld.long 0x00 4. " IRQS100 ,IRQS Status Bit 100" "Low,High" bitfld.long 0x00 3. " IRQS99 ,IRQS Status Bit 99" "Low,High" bitfld.long 0x00 2. " IRQS98 ,IRQS Status Bit 98" "Low,High" textline " " bitfld.long 0x00 1. " IRQS97 ,IRQS Status Bit 97" "Low,High" bitfld.long 0x00 0. " IRQS96 ,IRQS Status Bit 96" "Low,High" else hgroup.long 0x0D10++0x03 hide.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x05) rgroup.long 0x0D14++0x03 line.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4" bitfld.long 0x00 31. " IRQS159 ,IRQS Status Bit 159" "Low,High" bitfld.long 0x00 30. " IRQS158 ,IRQS Status Bit 158" "Low,High" bitfld.long 0x00 29. " IRQS157 ,IRQS Status Bit 157" "Low,High" textline " " bitfld.long 0x00 28. " IRQS156 ,IRQS Status Bit 156" "Low,High" bitfld.long 0x00 27. " IRQS155 ,IRQS Status Bit 155" "Low,High" bitfld.long 0x00 26. " IRQS154 ,IRQS Status Bit 154" "Low,High" textline " " bitfld.long 0x00 25. " IRQS153 ,IRQS Status Bit 153" "Low,High" bitfld.long 0x00 24. " IRQS152 ,IRQS Status Bit 152" "Low,High" bitfld.long 0x00 23. " IRQS151 ,IRQS Status Bit 151" "Low,High" textline " " bitfld.long 0x00 22. " IRQS150 ,IRQS Status Bit 150" "Low,High" bitfld.long 0x00 21. " IRQS149 ,IRQS Status Bit 149" "Low,High" bitfld.long 0x00 20. " IRQS148 ,IRQS Status Bit 148" "Low,High" textline " " bitfld.long 0x00 19. " IRQS147 ,IRQS Status Bit 147" "Low,High" bitfld.long 0x00 18. " IRQS146 ,IRQS Status Bit 146" "Low,High" bitfld.long 0x00 17. " IRQS145 ,IRQS Status Bit 145" "Low,High" textline " " bitfld.long 0x00 16. " IRQS144 ,IRQS Status Bit 144" "Low,High" bitfld.long 0x00 15. " IRQS143 ,IRQS Status Bit 143" "Low,High" bitfld.long 0x00 14. " IRQS142 ,IRQS Status Bit 142" "Low,High" textline " " bitfld.long 0x00 13. " IRQS141 ,IRQS Status Bit 141" "Low,High" bitfld.long 0x00 12. " IRQS140 ,IRQS Status Bit 140" "Low,High" bitfld.long 0x00 11. " IRQS139 ,IRQS Status Bit 139" "Low,High" textline " " bitfld.long 0x00 10. " IRQS138 ,IRQS Status Bit 138" "Low,High" bitfld.long 0x00 9. " IRQS137 ,IRQS Status Bit 137" "Low,High" bitfld.long 0x00 8. " IRQS136 ,IRQS Status Bit 136" "Low,High" textline " " bitfld.long 0x00 7. " IRQS135 ,IRQS Status Bit 135" "Low,High" bitfld.long 0x00 6. " IRQS134 ,IRQS Status Bit 134" "Low,High" bitfld.long 0x00 5. " IRQS133 ,IRQS Status Bit 133" "Low,High" textline " " bitfld.long 0x00 4. " IRQS132 ,IRQS Status Bit 132" "Low,High" bitfld.long 0x00 3. " IRQS131 ,IRQS Status Bit 131" "Low,High" bitfld.long 0x00 2. " IRQS130 ,IRQS Status Bit 130" "Low,High" textline " " bitfld.long 0x00 1. " IRQS129 ,IRQS Status Bit 129" "Low,High" bitfld.long 0x00 0. " IRQS128 ,IRQS Status Bit 128" "Low,High" else hgroup.long 0x0D14++0x03 hide.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x06) rgroup.long 0x0D18++0x03 line.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5" bitfld.long 0x00 31. " IRQS191 ,IRQS Status Bit 191" "Low,High" bitfld.long 0x00 30. " IRQS190 ,IRQS Status Bit 190" "Low,High" bitfld.long 0x00 29. " IRQS189 ,IRQS Status Bit 189" "Low,High" textline " " bitfld.long 0x00 28. " IRQS188 ,IRQS Status Bit 188" "Low,High" bitfld.long 0x00 27. " IRQS187 ,IRQS Status Bit 187" "Low,High" bitfld.long 0x00 26. " IRQS186 ,IRQS Status Bit 186" "Low,High" textline " " bitfld.long 0x00 25. " IRQS185 ,IRQS Status Bit 185" "Low,High" bitfld.long 0x00 24. " IRQS184 ,IRQS Status Bit 184" "Low,High" bitfld.long 0x00 23. " IRQS183 ,IRQS Status Bit 183" "Low,High" textline " " bitfld.long 0x00 22. " IRQS182 ,IRQS Status Bit 182" "Low,High" bitfld.long 0x00 21. " IRQS181 ,IRQS Status Bit 181" "Low,High" bitfld.long 0x00 20. " IRQS180 ,IRQS Status Bit 180" "Low,High" textline " " bitfld.long 0x00 19. " IRQS179 ,IRQS Status Bit 179" "Low,High" bitfld.long 0x00 18. " IRQS178 ,IRQS Status Bit 178" "Low,High" bitfld.long 0x00 17. " IRQS177 ,IRQS Status Bit 177" "Low,High" textline " " bitfld.long 0x00 16. " IRQS176 ,IRQS Status Bit 176" "Low,High" bitfld.long 0x00 15. " IRQS175 ,IRQS Status Bit 175" "Low,High" bitfld.long 0x00 14. " IRQS174 ,IRQS Status Bit 174" "Low,High" textline " " bitfld.long 0x00 13. " IRQS173 ,IRQS Status Bit 173" "Low,High" bitfld.long 0x00 12. " IRQS172 ,IRQS Status Bit 172" "Low,High" bitfld.long 0x00 11. " IRQS171 ,IRQS Status Bit 171" "Low,High" textline " " bitfld.long 0x00 10. " IRQS170 ,IRQS Status Bit 170" "Low,High" bitfld.long 0x00 9. " IRQS169 ,IRQS Status Bit 169" "Low,High" bitfld.long 0x00 8. " IRQS168 ,IRQS Status Bit 168" "Low,High" textline " " bitfld.long 0x00 7. " IRQS167 ,IRQS Status Bit 167" "Low,High" bitfld.long 0x00 6. " IRQS166 ,IRQS Status Bit 166" "Low,High" bitfld.long 0x00 5. " IRQS165 ,IRQS Status Bit 165" "Low,High" textline " " bitfld.long 0x00 4. " IRQS164 ,IRQS Status Bit 164" "Low,High" bitfld.long 0x00 3. " IRQS163 ,IRQS Status Bit 163" "Low,High" bitfld.long 0x00 2. " IRQS162 ,IRQS Status Bit 162" "Low,High" textline " " bitfld.long 0x00 1. " IRQS161 ,IRQS Status Bit 161" "Low,High" bitfld.long 0x00 0. " IRQS160 ,IRQS Status Bit 160" "Low,High" else hgroup.long 0x0D18++0x03 hide.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x07) rgroup.long 0x0D1C++0x03 line.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6" bitfld.long 0x00 31. " IRQS223 ,IRQS Status Bit 223" "Low,High" bitfld.long 0x00 30. " IRQS222 ,IRQS Status Bit 222" "Low,High" bitfld.long 0x00 29. " IRQS221 ,IRQS Status Bit 221" "Low,High" textline " " bitfld.long 0x00 28. " IRQS220 ,IRQS Status Bit 220" "Low,High" bitfld.long 0x00 27. " IRQS219 ,IRQS Status Bit 219" "Low,High" bitfld.long 0x00 26. " IRQS218 ,IRQS Status Bit 218" "Low,High" textline " " bitfld.long 0x00 25. " IRQS217 ,IRQS Status Bit 217" "Low,High" bitfld.long 0x00 24. " IRQS216 ,IRQS Status Bit 216" "Low,High" bitfld.long 0x00 23. " IRQS215 ,IRQS Status Bit 215" "Low,High" textline " " bitfld.long 0x00 22. " IRQS214 ,IRQS Status Bit 214" "Low,High" bitfld.long 0x00 21. " IRQS213 ,IRQS Status Bit 213" "Low,High" bitfld.long 0x00 20. " IRQS212 ,IRQS Status Bit 212" "Low,High" textline " " bitfld.long 0x00 19. " IRQS211 ,IRQS Status Bit 211" "Low,High" bitfld.long 0x00 18. " IRQS210 ,IRQS Status Bit 210" "Low,High" bitfld.long 0x00 17. " IRQS209 ,IRQS Status Bit 209" "Low,High" textline " " bitfld.long 0x00 16. " IRQS208 ,IRQS Status Bit 208" "Low,High" bitfld.long 0x00 15. " IRQS207 ,IRQS Status Bit 207" "Low,High" bitfld.long 0x00 14. " IRQS206 ,IRQS Status Bit 206" "Low,High" textline " " bitfld.long 0x00 13. " IRQS205 ,IRQS Status Bit 205" "Low,High" bitfld.long 0x00 12. " IRQS204 ,IRQS Status Bit 204" "Low,High" bitfld.long 0x00 11. " IRQS203 ,IRQS Status Bit 203" "Low,High" textline " " bitfld.long 0x00 10. " IRQS202 ,IRQS Status Bit 202" "Low,High" bitfld.long 0x00 9. " IRQS201 ,IRQS Status Bit 201" "Low,High" bitfld.long 0x00 8. " IRQS200 ,IRQS Status Bit 200" "Low,High" textline " " bitfld.long 0x00 7. " IRQS199 ,IRQS Status Bit 199" "Low,High" bitfld.long 0x00 6. " IRQS198 ,IRQS Status Bit 198" "Low,High" bitfld.long 0x00 5. " IRQS197 ,IRQS Status Bit 197" "Low,High" textline " " bitfld.long 0x00 4. " IRQS196 ,IRQS Status Bit 196" "Low,High" bitfld.long 0x00 3. " IRQS195 ,IRQS Status Bit 195" "Low,High" bitfld.long 0x00 2. " IRQS194 ,IRQS Status Bit 194" "Low,High" textline " " bitfld.long 0x00 1. " IRQS193 ,IRQS Status Bit 193" "Low,High" bitfld.long 0x00 0. " IRQS192 ,IRQS Status Bit 192" "Low,High" else hgroup.long 0x0D1C++0x03 hide.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x08) rgroup.long 0x0D20++0x03 line.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7" bitfld.long 0x00 31. " IRQS255 ,IRQS Status Bit 255" "Low,High" bitfld.long 0x00 30. " IRQS254 ,IRQS Status Bit 254" "Low,High" bitfld.long 0x00 29. " IRQS253 ,IRQS Status Bit 253" "Low,High" textline " " bitfld.long 0x00 28. " IRQS252 ,IRQS Status Bit 252" "Low,High" bitfld.long 0x00 27. " IRQS251 ,IRQS Status Bit 251" "Low,High" bitfld.long 0x00 26. " IRQS250 ,IRQS Status Bit 250" "Low,High" textline " " bitfld.long 0x00 25. " IRQS249 ,IRQS Status Bit 249" "Low,High" bitfld.long 0x00 24. " IRQS248 ,IRQS Status Bit 248" "Low,High" bitfld.long 0x00 23. " IRQS247 ,IRQS Status Bit 247" "Low,High" textline " " bitfld.long 0x00 22. " IRQS246 ,IRQS Status Bit 246" "Low,High" bitfld.long 0x00 21. " IRQS245 ,IRQS Status Bit 245" "Low,High" bitfld.long 0x00 20. " IRQS244 ,IRQS Status Bit 244" "Low,High" textline " " bitfld.long 0x00 19. " IRQS243 ,IRQS Status Bit 243" "Low,High" bitfld.long 0x00 18. " IRQS242 ,IRQS Status Bit 242" "Low,High" bitfld.long 0x00 17. " IRQS241 ,IRQS Status Bit 241" "Low,High" textline " " bitfld.long 0x00 16. " IRQS240 ,IRQS Status Bit 240" "Low,High" bitfld.long 0x00 15. " IRQS239 ,IRQS Status Bit 239" "Low,High" bitfld.long 0x00 14. " IRQS238 ,IRQS Status Bit 238" "Low,High" textline " " bitfld.long 0x00 13. " IRQS237 ,IRQS Status Bit 237" "Low,High" bitfld.long 0x00 12. " IRQS236 ,IRQS Status Bit 236" "Low,High" bitfld.long 0x00 11. " IRQS235 ,IRQS Status Bit 235" "Low,High" textline " " bitfld.long 0x00 10. " IRQS234 ,IRQS Status Bit 234" "Low,High" bitfld.long 0x00 9. " IRQS233 ,IRQS Status Bit 233" "Low,High" bitfld.long 0x00 8. " IRQS232 ,IRQS Status Bit 232" "Low,High" textline " " bitfld.long 0x00 7. " IRQS231 ,IRQS Status Bit 231" "Low,High" bitfld.long 0x00 6. " IRQS230 ,IRQS Status Bit 230" "Low,High" bitfld.long 0x00 5. " IRQS229 ,IRQS Status Bit 229" "Low,High" textline " " bitfld.long 0x00 4. " IRQS228 ,IRQS Status Bit 228" "Low,High" bitfld.long 0x00 3. " IRQS227 ,IRQS Status Bit 227" "Low,High" bitfld.long 0x00 2. " IRQS226 ,IRQS Status Bit 226" "Low,High" textline " " bitfld.long 0x00 1. " IRQS225 ,IRQS Status Bit 225" "Low,High" bitfld.long 0x00 0. " IRQS224 ,IRQS Status Bit 224" "Low,High" else hgroup.long 0x0D20++0x03 hide.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x09) rgroup.long 0x0D24++0x03 line.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8" bitfld.long 0x00 31. " IRQS287 ,IRQS Status Bit 287" "Low,High" bitfld.long 0x00 30. " IRQS286 ,IRQS Status Bit 286" "Low,High" bitfld.long 0x00 29. " IRQS285 ,IRQS Status Bit 285" "Low,High" textline " " bitfld.long 0x00 28. " IRQS284 ,IRQS Status Bit 284" "Low,High" bitfld.long 0x00 27. " IRQS283 ,IRQS Status Bit 283" "Low,High" bitfld.long 0x00 26. " IRQS282 ,IRQS Status Bit 282" "Low,High" textline " " bitfld.long 0x00 25. " IRQS281 ,IRQS Status Bit 281" "Low,High" bitfld.long 0x00 24. " IRQS280 ,IRQS Status Bit 280" "Low,High" bitfld.long 0x00 23. " IRQS279 ,IRQS Status Bit 279" "Low,High" textline " " bitfld.long 0x00 22. " IRQS278 ,IRQS Status Bit 278" "Low,High" bitfld.long 0x00 21. " IRQS277 ,IRQS Status Bit 277" "Low,High" bitfld.long 0x00 20. " IRQS276 ,IRQS Status Bit 276" "Low,High" textline " " bitfld.long 0x00 19. " IRQS275 ,IRQS Status Bit 275" "Low,High" bitfld.long 0x00 18. " IRQS274 ,IRQS Status Bit 274" "Low,High" bitfld.long 0x00 17. " IRQS273 ,IRQS Status Bit 273" "Low,High" textline " " bitfld.long 0x00 16. " IRQS272 ,IRQS Status Bit 272" "Low,High" bitfld.long 0x00 15. " IRQS271 ,IRQS Status Bit 271" "Low,High" bitfld.long 0x00 14. " IRQS270 ,IRQS Status Bit 270" "Low,High" textline " " bitfld.long 0x00 13. " IRQS269 ,IRQS Status Bit 269" "Low,High" bitfld.long 0x00 12. " IRQS268 ,IRQS Status Bit 268" "Low,High" bitfld.long 0x00 11. " IRQS267 ,IRQS Status Bit 267" "Low,High" textline " " bitfld.long 0x00 10. " IRQS266 ,IRQS Status Bit 266" "Low,High" bitfld.long 0x00 9. " IRQS265 ,IRQS Status Bit 265" "Low,High" bitfld.long 0x00 8. " IRQS264 ,IRQS Status Bit 264" "Low,High" textline " " bitfld.long 0x00 7. " IRQS263 ,IRQS Status Bit 263" "Low,High" bitfld.long 0x00 6. " IRQS262 ,IRQS Status Bit 262" "Low,High" bitfld.long 0x00 5. " IRQS261 ,IRQS Status Bit 261" "Low,High" textline " " bitfld.long 0x00 4. " IRQS260 ,IRQS Status Bit 260" "Low,High" bitfld.long 0x00 3. " IRQS259 ,IRQS Status Bit 259" "Low,High" bitfld.long 0x00 2. " IRQS258 ,IRQS Status Bit 258" "Low,High" textline " " bitfld.long 0x00 1. " IRQS257 ,IRQS Status Bit 257" "Low,High" bitfld.long 0x00 0. " IRQS256 ,IRQS Status Bit 256" "Low,High" else hgroup.long 0x0D24++0x03 hide.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0A) rgroup.long 0x0D28++0x03 line.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9" bitfld.long 0x00 31. " IRQS319 ,IRQS Status Bit 319" "Low,High" bitfld.long 0x00 30. " IRQS318 ,IRQS Status Bit 318" "Low,High" bitfld.long 0x00 29. " IRQS317 ,IRQS Status Bit 317" "Low,High" textline " " bitfld.long 0x00 28. " IRQS316 ,IRQS Status Bit 316" "Low,High" bitfld.long 0x00 27. " IRQS315 ,IRQS Status Bit 315" "Low,High" bitfld.long 0x00 26. " IRQS314 ,IRQS Status Bit 314" "Low,High" textline " " bitfld.long 0x00 25. " IRQS313 ,IRQS Status Bit 313" "Low,High" bitfld.long 0x00 24. " IRQS312 ,IRQS Status Bit 312" "Low,High" bitfld.long 0x00 23. " IRQS311 ,IRQS Status Bit 311" "Low,High" textline " " bitfld.long 0x00 22. " IRQS310 ,IRQS Status Bit 310" "Low,High" bitfld.long 0x00 21. " IRQS309 ,IRQS Status Bit 309" "Low,High" bitfld.long 0x00 20. " IRQS308 ,IRQS Status Bit 308" "Low,High" textline " " bitfld.long 0x00 19. " IRQS307 ,IRQS Status Bit 307" "Low,High" bitfld.long 0x00 18. " IRQS306 ,IRQS Status Bit 306" "Low,High" bitfld.long 0x00 17. " IRQS305 ,IRQS Status Bit 305" "Low,High" textline " " bitfld.long 0x00 16. " IRQS304 ,IRQS Status Bit 304" "Low,High" bitfld.long 0x00 15. " IRQS303 ,IRQS Status Bit 303" "Low,High" bitfld.long 0x00 14. " IRQS302 ,IRQS Status Bit 302" "Low,High" textline " " bitfld.long 0x00 13. " IRQS301 ,IRQS Status Bit 301" "Low,High" bitfld.long 0x00 12. " IRQS300 ,IRQS Status Bit 300" "Low,High" bitfld.long 0x00 11. " IRQS299 ,IRQS Status Bit 299" "Low,High" textline " " bitfld.long 0x00 10. " IRQS298 ,IRQS Status Bit 298" "Low,High" bitfld.long 0x00 9. " IRQS297 ,IRQS Status Bit 297" "Low,High" bitfld.long 0x00 8. " IRQS296 ,IRQS Status Bit 296" "Low,High" textline " " bitfld.long 0x00 7. " IRQS295 ,IRQS Status Bit 295" "Low,High" bitfld.long 0x00 6. " IRQS294 ,IRQS Status Bit 294" "Low,High" bitfld.long 0x00 5. " IRQS293 ,IRQS Status Bit 293" "Low,High" textline " " bitfld.long 0x00 4. " IRQS292 ,IRQS Status Bit 292" "Low,High" bitfld.long 0x00 3. " IRQS291 ,IRQS Status Bit 291" "Low,High" bitfld.long 0x00 2. " IRQS290 ,IRQS Status Bit 290" "Low,High" textline " " bitfld.long 0x00 1. " IRQS289 ,IRQS Status Bit 289" "Low,High" bitfld.long 0x00 0. " IRQS288 ,IRQS Status Bit 288" "Low,High" else hgroup.long 0x0D28++0x03 hide.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0B) rgroup.long 0x0D2C++0x03 line.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10" bitfld.long 0x00 31. " IRQS351 ,IRQS Status Bit 351" "Low,High" bitfld.long 0x00 30. " IRQS350 ,IRQS Status Bit 350" "Low,High" bitfld.long 0x00 29. " IRQS349 ,IRQS Status Bit 349" "Low,High" textline " " bitfld.long 0x00 28. " IRQS348 ,IRQS Status Bit 348" "Low,High" bitfld.long 0x00 27. " IRQS347 ,IRQS Status Bit 347" "Low,High" bitfld.long 0x00 26. " IRQS346 ,IRQS Status Bit 346" "Low,High" textline " " bitfld.long 0x00 25. " IRQS345 ,IRQS Status Bit 345" "Low,High" bitfld.long 0x00 24. " IRQS344 ,IRQS Status Bit 344" "Low,High" bitfld.long 0x00 23. " IRQS343 ,IRQS Status Bit 343" "Low,High" textline " " bitfld.long 0x00 22. " IRQS342 ,IRQS Status Bit 342" "Low,High" bitfld.long 0x00 21. " IRQS341 ,IRQS Status Bit 341" "Low,High" bitfld.long 0x00 20. " IRQS340 ,IRQS Status Bit 340" "Low,High" textline " " bitfld.long 0x00 19. " IRQS339 ,IRQS Status Bit 339" "Low,High" bitfld.long 0x00 18. " IRQS338 ,IRQS Status Bit 338" "Low,High" bitfld.long 0x00 17. " IRQS337 ,IRQS Status Bit 337" "Low,High" textline " " bitfld.long 0x00 16. " IRQS336 ,IRQS Status Bit 336" "Low,High" bitfld.long 0x00 15. " IRQS335 ,IRQS Status Bit 335" "Low,High" bitfld.long 0x00 14. " IRQS334 ,IRQS Status Bit 334" "Low,High" textline " " bitfld.long 0x00 13. " IRQS333 ,IRQS Status Bit 333" "Low,High" bitfld.long 0x00 12. " IRQS332 ,IRQS Status Bit 332" "Low,High" bitfld.long 0x00 11. " IRQS331 ,IRQS Status Bit 331" "Low,High" textline " " bitfld.long 0x00 10. " IRQS330 ,IRQS Status Bit 330" "Low,High" bitfld.long 0x00 9. " IRQS329 ,IRQS Status Bit 329" "Low,High" bitfld.long 0x00 8. " IRQS328 ,IRQS Status Bit 328" "Low,High" textline " " bitfld.long 0x00 7. " IRQS327 ,IRQS Status Bit 327" "Low,High" bitfld.long 0x00 6. " IRQS326 ,IRQS Status Bit 326" "Low,High" bitfld.long 0x00 5. " IRQS325 ,IRQS Status Bit 325" "Low,High" textline " " bitfld.long 0x00 4. " IRQS324 ,IRQS Status Bit 324" "Low,High" bitfld.long 0x00 3. " IRQS323 ,IRQS Status Bit 323" "Low,High" bitfld.long 0x00 2. " IRQS322 ,IRQS Status Bit 322" "Low,High" textline " " bitfld.long 0x00 1. " IRQS321 ,IRQS Status Bit 321" "Low,High" bitfld.long 0x00 0. " IRQS320 ,IRQS Status Bit 320" "Low,High" else hgroup.long 0x0D2C++0x03 hide.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0C) rgroup.long 0x0D30++0x03 line.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11" bitfld.long 0x00 31. " IRQS383 ,IRQS Status Bit 383" "Low,High" bitfld.long 0x00 30. " IRQS382 ,IRQS Status Bit 382" "Low,High" bitfld.long 0x00 29. " IRQS381 ,IRQS Status Bit 381" "Low,High" textline " " bitfld.long 0x00 28. " IRQS380 ,IRQS Status Bit 380" "Low,High" bitfld.long 0x00 27. " IRQS379 ,IRQS Status Bit 379" "Low,High" bitfld.long 0x00 26. " IRQS378 ,IRQS Status Bit 378" "Low,High" textline " " bitfld.long 0x00 25. " IRQS377 ,IRQS Status Bit 377" "Low,High" bitfld.long 0x00 24. " IRQS376 ,IRQS Status Bit 376" "Low,High" bitfld.long 0x00 23. " IRQS375 ,IRQS Status Bit 375" "Low,High" textline " " bitfld.long 0x00 22. " IRQS374 ,IRQS Status Bit 374" "Low,High" bitfld.long 0x00 21. " IRQS373 ,IRQS Status Bit 373" "Low,High" bitfld.long 0x00 20. " IRQS372 ,IRQS Status Bit 372" "Low,High" textline " " bitfld.long 0x00 19. " IRQS371 ,IRQS Status Bit 371" "Low,High" bitfld.long 0x00 18. " IRQS370 ,IRQS Status Bit 370" "Low,High" bitfld.long 0x00 17. " IRQS369 ,IRQS Status Bit 369" "Low,High" textline " " bitfld.long 0x00 16. " IRQS368 ,IRQS Status Bit 368" "Low,High" bitfld.long 0x00 15. " IRQS367 ,IRQS Status Bit 367" "Low,High" bitfld.long 0x00 14. " IRQS366 ,IRQS Status Bit 366" "Low,High" textline " " bitfld.long 0x00 13. " IRQS365 ,IRQS Status Bit 365" "Low,High" bitfld.long 0x00 12. " IRQS364 ,IRQS Status Bit 364" "Low,High" bitfld.long 0x00 11. " IRQS363 ,IRQS Status Bit 363" "Low,High" textline " " bitfld.long 0x00 10. " IRQS362 ,IRQS Status Bit 362" "Low,High" bitfld.long 0x00 9. " IRQS361 ,IRQS Status Bit 361" "Low,High" bitfld.long 0x00 8. " IRQS360 ,IRQS Status Bit 360" "Low,High" textline " " bitfld.long 0x00 7. " IRQS359 ,IRQS Status Bit 359" "Low,High" bitfld.long 0x00 6. " IRQS358 ,IRQS Status Bit 358" "Low,High" bitfld.long 0x00 5. " IRQS357 ,IRQS Status Bit 357" "Low,High" textline " " bitfld.long 0x00 4. " IRQS356 ,IRQS Status Bit 356" "Low,High" bitfld.long 0x00 3. " IRQS355 ,IRQS Status Bit 355" "Low,High" bitfld.long 0x00 2. " IRQS354 ,IRQS Status Bit 354" "Low,High" textline " " bitfld.long 0x00 1. " IRQS353 ,IRQS Status Bit 353" "Low,High" bitfld.long 0x00 0. " IRQS352 ,IRQS Status Bit 352" "Low,High" else hgroup.long 0x0D30++0x03 hide.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0D) rgroup.long 0x0D34++0x03 line.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12" bitfld.long 0x00 31. " IRQS415 ,IRQS Status Bit 415" "Low,High" bitfld.long 0x00 30. " IRQS414 ,IRQS Status Bit 414" "Low,High" bitfld.long 0x00 29. " IRQS413 ,IRQS Status Bit 413" "Low,High" textline " " bitfld.long 0x00 28. " IRQS412 ,IRQS Status Bit 412" "Low,High" bitfld.long 0x00 27. " IRQS411 ,IRQS Status Bit 411" "Low,High" bitfld.long 0x00 26. " IRQS410 ,IRQS Status Bit 410" "Low,High" textline " " bitfld.long 0x00 25. " IRQS409 ,IRQS Status Bit 409" "Low,High" bitfld.long 0x00 24. " IRQS408 ,IRQS Status Bit 408" "Low,High" bitfld.long 0x00 23. " IRQS407 ,IRQS Status Bit 407" "Low,High" textline " " bitfld.long 0x00 22. " IRQS406 ,IRQS Status Bit 406" "Low,High" bitfld.long 0x00 21. " IRQS405 ,IRQS Status Bit 405" "Low,High" bitfld.long 0x00 20. " IRQS404 ,IRQS Status Bit 404" "Low,High" textline " " bitfld.long 0x00 19. " IRQS403 ,IRQS Status Bit 403" "Low,High" bitfld.long 0x00 18. " IRQS402 ,IRQS Status Bit 402" "Low,High" bitfld.long 0x00 17. " IRQS401 ,IRQS Status Bit 401" "Low,High" textline " " bitfld.long 0x00 16. " IRQS400 ,IRQS Status Bit 400" "Low,High" bitfld.long 0x00 15. " IRQS399 ,IRQS Status Bit 399" "Low,High" bitfld.long 0x00 14. " IRQS398 ,IRQS Status Bit 398" "Low,High" textline " " bitfld.long 0x00 13. " IRQS397 ,IRQS Status Bit 397" "Low,High" bitfld.long 0x00 12. " IRQS396 ,IRQS Status Bit 396" "Low,High" bitfld.long 0x00 11. " IRQS395 ,IRQS Status Bit 395" "Low,High" textline " " bitfld.long 0x00 10. " IRQS394 ,IRQS Status Bit 394" "Low,High" bitfld.long 0x00 9. " IRQS393 ,IRQS Status Bit 393" "Low,High" bitfld.long 0x00 8. " IRQS392 ,IRQS Status Bit 392" "Low,High" textline " " bitfld.long 0x00 7. " IRQS391 ,IRQS Status Bit 391" "Low,High" bitfld.long 0x00 6. " IRQS390 ,IRQS Status Bit 390" "Low,High" bitfld.long 0x00 5. " IRQS389 ,IRQS Status Bit 389" "Low,High" textline " " bitfld.long 0x00 4. " IRQS388 ,IRQS Status Bit 388" "Low,High" bitfld.long 0x00 3. " IRQS387 ,IRQS Status Bit 387" "Low,High" bitfld.long 0x00 2. " IRQS386 ,IRQS Status Bit 386" "Low,High" textline " " bitfld.long 0x00 1. " IRQS385 ,IRQS Status Bit 385" "Low,High" bitfld.long 0x00 0. " IRQS384 ,IRQS Status Bit 384" "Low,High" else hgroup.long 0x0D34++0x03 hide.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0E) rgroup.long 0x0D38++0x03 line.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13" bitfld.long 0x00 31. " IRQS447 ,IRQS Status Bit 447" "Low,High" bitfld.long 0x00 30. " IRQS446 ,IRQS Status Bit 446" "Low,High" bitfld.long 0x00 29. " IRQS445 ,IRQS Status Bit 445" "Low,High" textline " " bitfld.long 0x00 28. " IRQS444 ,IRQS Status Bit 444" "Low,High" bitfld.long 0x00 27. " IRQS443 ,IRQS Status Bit 443" "Low,High" bitfld.long 0x00 26. " IRQS442 ,IRQS Status Bit 442" "Low,High" textline " " bitfld.long 0x00 25. " IRQS441 ,IRQS Status Bit 441" "Low,High" bitfld.long 0x00 24. " IRQS440 ,IRQS Status Bit 440" "Low,High" bitfld.long 0x00 23. " IRQS439 ,IRQS Status Bit 439" "Low,High" textline " " bitfld.long 0x00 22. " IRQS438 ,IRQS Status Bit 438" "Low,High" bitfld.long 0x00 21. " IRQS437 ,IRQS Status Bit 437" "Low,High" bitfld.long 0x00 20. " IRQS436 ,IRQS Status Bit 436" "Low,High" textline " " bitfld.long 0x00 19. " IRQS435 ,IRQS Status Bit 435" "Low,High" bitfld.long 0x00 18. " IRQS434 ,IRQS Status Bit 434" "Low,High" bitfld.long 0x00 17. " IRQS433 ,IRQS Status Bit 433" "Low,High" textline " " bitfld.long 0x00 16. " IRQS432 ,IRQS Status Bit 432" "Low,High" bitfld.long 0x00 15. " IRQS431 ,IRQS Status Bit 431" "Low,High" bitfld.long 0x00 14. " IRQS430 ,IRQS Status Bit 430" "Low,High" textline " " bitfld.long 0x00 13. " IRQS429 ,IRQS Status Bit 429" "Low,High" bitfld.long 0x00 12. " IRQS428 ,IRQS Status Bit 428" "Low,High" bitfld.long 0x00 11. " IRQS427 ,IRQS Status Bit 427" "Low,High" textline " " bitfld.long 0x00 10. " IRQS426 ,IRQS Status Bit 426" "Low,High" bitfld.long 0x00 9. " IRQS425 ,IRQS Status Bit 425" "Low,High" bitfld.long 0x00 8. " IRQS424 ,IRQS Status Bit 424" "Low,High" textline " " bitfld.long 0x00 7. " IRQS423 ,IRQS Status Bit 423" "Low,High" bitfld.long 0x00 6. " IRQS422 ,IRQS Status Bit 422" "Low,High" bitfld.long 0x00 5. " IRQS421 ,IRQS Status Bit 421" "Low,High" textline " " bitfld.long 0x00 4. " IRQS420 ,IRQS Status Bit 420" "Low,High" bitfld.long 0x00 3. " IRQS419 ,IRQS Status Bit 419" "Low,High" bitfld.long 0x00 2. " IRQS418 ,IRQS Status Bit 418" "Low,High" textline " " bitfld.long 0x00 1. " IRQS417 ,IRQS Status Bit 417" "Low,High" bitfld.long 0x00 0. " IRQS416 ,IRQS Status Bit 416" "Low,High" else hgroup.long 0x0D38++0x03 hide.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x0F) rgroup.long 0x0D3C++0x03 line.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14" bitfld.long 0x00 31. " IRQS479 ,IRQS Status Bit 479" "Low,High" bitfld.long 0x00 30. " IRQS478 ,IRQS Status Bit 478" "Low,High" bitfld.long 0x00 29. " IRQS477 ,IRQS Status Bit 477" "Low,High" textline " " bitfld.long 0x00 28. " IRQS476 ,IRQS Status Bit 476" "Low,High" bitfld.long 0x00 27. " IRQS475 ,IRQS Status Bit 475" "Low,High" bitfld.long 0x00 26. " IRQS474 ,IRQS Status Bit 474" "Low,High" textline " " bitfld.long 0x00 25. " IRQS473 ,IRQS Status Bit 473" "Low,High" bitfld.long 0x00 24. " IRQS472 ,IRQS Status Bit 472" "Low,High" bitfld.long 0x00 23. " IRQS471 ,IRQS Status Bit 471" "Low,High" textline " " bitfld.long 0x00 22. " IRQS470 ,IRQS Status Bit 470" "Low,High" bitfld.long 0x00 21. " IRQS469 ,IRQS Status Bit 469" "Low,High" bitfld.long 0x00 20. " IRQS468 ,IRQS Status Bit 468" "Low,High" textline " " bitfld.long 0x00 19. " IRQS467 ,IRQS Status Bit 467" "Low,High" bitfld.long 0x00 18. " IRQS466 ,IRQS Status Bit 466" "Low,High" bitfld.long 0x00 17. " IRQS465 ,IRQS Status Bit 465" "Low,High" textline " " bitfld.long 0x00 16. " IRQS464 ,IRQS Status Bit 464" "Low,High" bitfld.long 0x00 15. " IRQS463 ,IRQS Status Bit 463" "Low,High" bitfld.long 0x00 14. " IRQS462 ,IRQS Status Bit 462" "Low,High" textline " " bitfld.long 0x00 13. " IRQS461 ,IRQS Status Bit 461" "Low,High" bitfld.long 0x00 12. " IRQS460 ,IRQS Status Bit 460" "Low,High" bitfld.long 0x00 11. " IRQS459 ,IRQS Status Bit 459" "Low,High" textline " " bitfld.long 0x00 10. " IRQS458 ,IRQS Status Bit 458" "Low,High" bitfld.long 0x00 9. " IRQS457 ,IRQS Status Bit 457" "Low,High" bitfld.long 0x00 8. " IRQS456 ,IRQS Status Bit 456" "Low,High" textline " " bitfld.long 0x00 7. " IRQS455 ,IRQS Status Bit 455" "Low,High" bitfld.long 0x00 6. " IRQS454 ,IRQS Status Bit 454" "Low,High" bitfld.long 0x00 5. " IRQS453 ,IRQS Status Bit 453" "Low,High" textline " " bitfld.long 0x00 4. " IRQS452 ,IRQS Status Bit 452" "Low,High" bitfld.long 0x00 3. " IRQS451 ,IRQS Status Bit 451" "Low,High" bitfld.long 0x00 2. " IRQS450 ,IRQS Status Bit 450" "Low,High" textline " " bitfld.long 0x00 1. " IRQS449 ,IRQS Status Bit 449" "Low,High" bitfld.long 0x00 0. " IRQS448 ,IRQS Status Bit 448" "Low,High" else hgroup.long 0x0D3C++0x03 hide.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x10) rgroup.long 0x0D40++0x03 line.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15" bitfld.long 0x00 31. " IRQS511 ,IRQS Status Bit 511" "Low,High" bitfld.long 0x00 30. " IRQS510 ,IRQS Status Bit 510" "Low,High" bitfld.long 0x00 29. " IRQS509 ,IRQS Status Bit 509" "Low,High" textline " " bitfld.long 0x00 28. " IRQS508 ,IRQS Status Bit 508" "Low,High" bitfld.long 0x00 27. " IRQS507 ,IRQS Status Bit 507" "Low,High" bitfld.long 0x00 26. " IRQS506 ,IRQS Status Bit 506" "Low,High" textline " " bitfld.long 0x00 25. " IRQS505 ,IRQS Status Bit 505" "Low,High" bitfld.long 0x00 24. " IRQS504 ,IRQS Status Bit 504" "Low,High" bitfld.long 0x00 23. " IRQS503 ,IRQS Status Bit 503" "Low,High" textline " " bitfld.long 0x00 22. " IRQS502 ,IRQS Status Bit 502" "Low,High" bitfld.long 0x00 21. " IRQS501 ,IRQS Status Bit 501" "Low,High" bitfld.long 0x00 20. " IRQS500 ,IRQS Status Bit 500" "Low,High" textline " " bitfld.long 0x00 19. " IRQS499 ,IRQS Status Bit 499" "Low,High" bitfld.long 0x00 18. " IRQS498 ,IRQS Status Bit 498" "Low,High" bitfld.long 0x00 17. " IRQS497 ,IRQS Status Bit 497" "Low,High" textline " " bitfld.long 0x00 16. " IRQS496 ,IRQS Status Bit 496" "Low,High" bitfld.long 0x00 15. " IRQS495 ,IRQS Status Bit 495" "Low,High" bitfld.long 0x00 14. " IRQS494 ,IRQS Status Bit 494" "Low,High" textline " " bitfld.long 0x00 13. " IRQS493 ,IRQS Status Bit 493" "Low,High" bitfld.long 0x00 12. " IRQS492 ,IRQS Status Bit 492" "Low,High" bitfld.long 0x00 11. " IRQS491 ,IRQS Status Bit 491" "Low,High" textline " " bitfld.long 0x00 10. " IRQS490 ,IRQS Status Bit 490" "Low,High" bitfld.long 0x00 9. " IRQS489 ,IRQS Status Bit 489" "Low,High" bitfld.long 0x00 8. " IRQS488 ,IRQS Status Bit 488" "Low,High" textline " " bitfld.long 0x00 7. " IRQS487 ,IRQS Status Bit 487" "Low,High" bitfld.long 0x00 6. " IRQS486 ,IRQS Status Bit 486" "Low,High" bitfld.long 0x00 5. " IRQS485 ,IRQS Status Bit 485" "Low,High" textline " " bitfld.long 0x00 4. " IRQS484 ,IRQS Status Bit 484" "Low,High" bitfld.long 0x00 3. " IRQS483 ,IRQS Status Bit 483" "Low,High" bitfld.long 0x00 2. " IRQS482 ,IRQS Status Bit 482" "Low,High" textline " " bitfld.long 0x00 1. " IRQS481 ,IRQS Status Bit 481" "Low,High" bitfld.long 0x00 0. " IRQS480 ,IRQS Status Bit 480" "Low,High" else hgroup.long 0x0D40++0x03 hide.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x11) rgroup.long 0x0D44++0x03 line.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16" bitfld.long 0x00 31. " IRQS543 ,IRQS Status Bit 543" "Low,High" bitfld.long 0x00 30. " IRQS542 ,IRQS Status Bit 542" "Low,High" bitfld.long 0x00 29. " IRQS541 ,IRQS Status Bit 541" "Low,High" textline " " bitfld.long 0x00 28. " IRQS540 ,IRQS Status Bit 540" "Low,High" bitfld.long 0x00 27. " IRQS539 ,IRQS Status Bit 539" "Low,High" bitfld.long 0x00 26. " IRQS538 ,IRQS Status Bit 538" "Low,High" textline " " bitfld.long 0x00 25. " IRQS537 ,IRQS Status Bit 537" "Low,High" bitfld.long 0x00 24. " IRQS536 ,IRQS Status Bit 536" "Low,High" bitfld.long 0x00 23. " IRQS535 ,IRQS Status Bit 535" "Low,High" textline " " bitfld.long 0x00 22. " IRQS534 ,IRQS Status Bit 534" "Low,High" bitfld.long 0x00 21. " IRQS533 ,IRQS Status Bit 533" "Low,High" bitfld.long 0x00 20. " IRQS532 ,IRQS Status Bit 532" "Low,High" textline " " bitfld.long 0x00 19. " IRQS531 ,IRQS Status Bit 531" "Low,High" bitfld.long 0x00 18. " IRQS530 ,IRQS Status Bit 530" "Low,High" bitfld.long 0x00 17. " IRQS529 ,IRQS Status Bit 529" "Low,High" textline " " bitfld.long 0x00 16. " IRQS528 ,IRQS Status Bit 528" "Low,High" bitfld.long 0x00 15. " IRQS527 ,IRQS Status Bit 527" "Low,High" bitfld.long 0x00 14. " IRQS526 ,IRQS Status Bit 526" "Low,High" textline " " bitfld.long 0x00 13. " IRQS525 ,IRQS Status Bit 525" "Low,High" bitfld.long 0x00 12. " IRQS524 ,IRQS Status Bit 524" "Low,High" bitfld.long 0x00 11. " IRQS523 ,IRQS Status Bit 523" "Low,High" textline " " bitfld.long 0x00 10. " IRQS522 ,IRQS Status Bit 522" "Low,High" bitfld.long 0x00 9. " IRQS521 ,IRQS Status Bit 521" "Low,High" bitfld.long 0x00 8. " IRQS520 ,IRQS Status Bit 520" "Low,High" textline " " bitfld.long 0x00 7. " IRQS519 ,IRQS Status Bit 519" "Low,High" bitfld.long 0x00 6. " IRQS518 ,IRQS Status Bit 518" "Low,High" bitfld.long 0x00 5. " IRQS517 ,IRQS Status Bit 517" "Low,High" textline " " bitfld.long 0x00 4. " IRQS516 ,IRQS Status Bit 516" "Low,High" bitfld.long 0x00 3. " IRQS515 ,IRQS Status Bit 515" "Low,High" bitfld.long 0x00 2. " IRQS514 ,IRQS Status Bit 514" "Low,High" textline " " bitfld.long 0x00 1. " IRQS513 ,IRQS Status Bit 513" "Low,High" bitfld.long 0x00 0. " IRQS512 ,IRQS Status Bit 512" "Low,High" else hgroup.long 0x0D44++0x03 hide.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x12) rgroup.long 0x0D48++0x03 line.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17" bitfld.long 0x00 31. " IRQS575 ,IRQS Status Bit 575" "Low,High" bitfld.long 0x00 30. " IRQS574 ,IRQS Status Bit 574" "Low,High" bitfld.long 0x00 29. " IRQS573 ,IRQS Status Bit 573" "Low,High" textline " " bitfld.long 0x00 28. " IRQS572 ,IRQS Status Bit 572" "Low,High" bitfld.long 0x00 27. " IRQS571 ,IRQS Status Bit 571" "Low,High" bitfld.long 0x00 26. " IRQS570 ,IRQS Status Bit 570" "Low,High" textline " " bitfld.long 0x00 25. " IRQS569 ,IRQS Status Bit 569" "Low,High" bitfld.long 0x00 24. " IRQS568 ,IRQS Status Bit 568" "Low,High" bitfld.long 0x00 23. " IRQS567 ,IRQS Status Bit 567" "Low,High" textline " " bitfld.long 0x00 22. " IRQS566 ,IRQS Status Bit 566" "Low,High" bitfld.long 0x00 21. " IRQS565 ,IRQS Status Bit 565" "Low,High" bitfld.long 0x00 20. " IRQS564 ,IRQS Status Bit 564" "Low,High" textline " " bitfld.long 0x00 19. " IRQS563 ,IRQS Status Bit 563" "Low,High" bitfld.long 0x00 18. " IRQS562 ,IRQS Status Bit 562" "Low,High" bitfld.long 0x00 17. " IRQS561 ,IRQS Status Bit 561" "Low,High" textline " " bitfld.long 0x00 16. " IRQS560 ,IRQS Status Bit 560" "Low,High" bitfld.long 0x00 15. " IRQS559 ,IRQS Status Bit 559" "Low,High" bitfld.long 0x00 14. " IRQS558 ,IRQS Status Bit 558" "Low,High" textline " " bitfld.long 0x00 13. " IRQS557 ,IRQS Status Bit 557" "Low,High" bitfld.long 0x00 12. " IRQS556 ,IRQS Status Bit 556" "Low,High" bitfld.long 0x00 11. " IRQS555 ,IRQS Status Bit 555" "Low,High" textline " " bitfld.long 0x00 10. " IRQS554 ,IRQS Status Bit 554" "Low,High" bitfld.long 0x00 9. " IRQS553 ,IRQS Status Bit 553" "Low,High" bitfld.long 0x00 8. " IRQS552 ,IRQS Status Bit 552" "Low,High" textline " " bitfld.long 0x00 7. " IRQS551 ,IRQS Status Bit 551" "Low,High" bitfld.long 0x00 6. " IRQS550 ,IRQS Status Bit 550" "Low,High" bitfld.long 0x00 5. " IRQS549 ,IRQS Status Bit 549" "Low,High" textline " " bitfld.long 0x00 4. " IRQS548 ,IRQS Status Bit 548" "Low,High" bitfld.long 0x00 3. " IRQS547 ,IRQS Status Bit 547" "Low,High" bitfld.long 0x00 2. " IRQS546 ,IRQS Status Bit 546" "Low,High" textline " " bitfld.long 0x00 1. " IRQS545 ,IRQS Status Bit 545" "Low,High" bitfld.long 0x00 0. " IRQS544 ,IRQS Status Bit 544" "Low,High" else hgroup.long 0x0D48++0x03 hide.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x13) rgroup.long 0x0D4C++0x03 line.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18" bitfld.long 0x00 31. " IRQS607 ,IRQS Status Bit 607" "Low,High" bitfld.long 0x00 30. " IRQS606 ,IRQS Status Bit 606" "Low,High" bitfld.long 0x00 29. " IRQS605 ,IRQS Status Bit 605" "Low,High" textline " " bitfld.long 0x00 28. " IRQS604 ,IRQS Status Bit 604" "Low,High" bitfld.long 0x00 27. " IRQS603 ,IRQS Status Bit 603" "Low,High" bitfld.long 0x00 26. " IRQS602 ,IRQS Status Bit 602" "Low,High" textline " " bitfld.long 0x00 25. " IRQS601 ,IRQS Status Bit 601" "Low,High" bitfld.long 0x00 24. " IRQS600 ,IRQS Status Bit 600" "Low,High" bitfld.long 0x00 23. " IRQS599 ,IRQS Status Bit 599" "Low,High" textline " " bitfld.long 0x00 22. " IRQS598 ,IRQS Status Bit 598" "Low,High" bitfld.long 0x00 21. " IRQS597 ,IRQS Status Bit 597" "Low,High" bitfld.long 0x00 20. " IRQS596 ,IRQS Status Bit 596" "Low,High" textline " " bitfld.long 0x00 19. " IRQS595 ,IRQS Status Bit 595" "Low,High" bitfld.long 0x00 18. " IRQS594 ,IRQS Status Bit 594" "Low,High" bitfld.long 0x00 17. " IRQS593 ,IRQS Status Bit 593" "Low,High" textline " " bitfld.long 0x00 16. " IRQS592 ,IRQS Status Bit 592" "Low,High" bitfld.long 0x00 15. " IRQS591 ,IRQS Status Bit 591" "Low,High" bitfld.long 0x00 14. " IRQS590 ,IRQS Status Bit 590" "Low,High" textline " " bitfld.long 0x00 13. " IRQS589 ,IRQS Status Bit 589" "Low,High" bitfld.long 0x00 12. " IRQS588 ,IRQS Status Bit 588" "Low,High" bitfld.long 0x00 11. " IRQS587 ,IRQS Status Bit 587" "Low,High" textline " " bitfld.long 0x00 10. " IRQS586 ,IRQS Status Bit 586" "Low,High" bitfld.long 0x00 9. " IRQS585 ,IRQS Status Bit 585" "Low,High" bitfld.long 0x00 8. " IRQS584 ,IRQS Status Bit 584" "Low,High" textline " " bitfld.long 0x00 7. " IRQS583 ,IRQS Status Bit 583" "Low,High" bitfld.long 0x00 6. " IRQS582 ,IRQS Status Bit 582" "Low,High" bitfld.long 0x00 5. " IRQS581 ,IRQS Status Bit 581" "Low,High" textline " " bitfld.long 0x00 4. " IRQS580 ,IRQS Status Bit 580" "Low,High" bitfld.long 0x00 3. " IRQS579 ,IRQS Status Bit 579" "Low,High" bitfld.long 0x00 2. " IRQS578 ,IRQS Status Bit 578" "Low,High" textline " " bitfld.long 0x00 1. " IRQS577 ,IRQS Status Bit 577" "Low,High" bitfld.long 0x00 0. " IRQS576 ,IRQS Status Bit 576" "Low,High" else hgroup.long 0x0D4C++0x03 hide.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x14) rgroup.long 0x0D50++0x03 line.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19" bitfld.long 0x00 31. " IRQS639 ,IRQS Status Bit 639" "Low,High" bitfld.long 0x00 30. " IRQS638 ,IRQS Status Bit 638" "Low,High" bitfld.long 0x00 29. " IRQS637 ,IRQS Status Bit 637" "Low,High" textline " " bitfld.long 0x00 28. " IRQS636 ,IRQS Status Bit 636" "Low,High" bitfld.long 0x00 27. " IRQS635 ,IRQS Status Bit 635" "Low,High" bitfld.long 0x00 26. " IRQS634 ,IRQS Status Bit 634" "Low,High" textline " " bitfld.long 0x00 25. " IRQS633 ,IRQS Status Bit 633" "Low,High" bitfld.long 0x00 24. " IRQS632 ,IRQS Status Bit 632" "Low,High" bitfld.long 0x00 23. " IRQS631 ,IRQS Status Bit 631" "Low,High" textline " " bitfld.long 0x00 22. " IRQS630 ,IRQS Status Bit 630" "Low,High" bitfld.long 0x00 21. " IRQS629 ,IRQS Status Bit 629" "Low,High" bitfld.long 0x00 20. " IRQS628 ,IRQS Status Bit 628" "Low,High" textline " " bitfld.long 0x00 19. " IRQS627 ,IRQS Status Bit 627" "Low,High" bitfld.long 0x00 18. " IRQS626 ,IRQS Status Bit 626" "Low,High" bitfld.long 0x00 17. " IRQS625 ,IRQS Status Bit 625" "Low,High" textline " " bitfld.long 0x00 16. " IRQS624 ,IRQS Status Bit 624" "Low,High" bitfld.long 0x00 15. " IRQS623 ,IRQS Status Bit 623" "Low,High" bitfld.long 0x00 14. " IRQS622 ,IRQS Status Bit 622" "Low,High" textline " " bitfld.long 0x00 13. " IRQS621 ,IRQS Status Bit 621" "Low,High" bitfld.long 0x00 12. " IRQS620 ,IRQS Status Bit 620" "Low,High" bitfld.long 0x00 11. " IRQS619 ,IRQS Status Bit 619" "Low,High" textline " " bitfld.long 0x00 10. " IRQS618 ,IRQS Status Bit 618" "Low,High" bitfld.long 0x00 9. " IRQS617 ,IRQS Status Bit 617" "Low,High" bitfld.long 0x00 8. " IRQS616 ,IRQS Status Bit 616" "Low,High" textline " " bitfld.long 0x00 7. " IRQS615 ,IRQS Status Bit 615" "Low,High" bitfld.long 0x00 6. " IRQS614 ,IRQS Status Bit 614" "Low,High" bitfld.long 0x00 5. " IRQS613 ,IRQS Status Bit 613" "Low,High" textline " " bitfld.long 0x00 4. " IRQS612 ,IRQS Status Bit 612" "Low,High" bitfld.long 0x00 3. " IRQS611 ,IRQS Status Bit 611" "Low,High" bitfld.long 0x00 2. " IRQS610 ,IRQS Status Bit 610" "Low,High" textline " " bitfld.long 0x00 1. " IRQS609 ,IRQS Status Bit 609" "Low,High" bitfld.long 0x00 0. " IRQS608 ,IRQS Status Bit 608" "Low,High" else hgroup.long 0x0D50++0x03 hide.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x15) rgroup.long 0x0D54++0x03 line.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20" bitfld.long 0x00 31. " IRQS671 ,IRQS Status Bit 671" "Low,High" bitfld.long 0x00 30. " IRQS670 ,IRQS Status Bit 670" "Low,High" bitfld.long 0x00 29. " IRQS669 ,IRQS Status Bit 669" "Low,High" textline " " bitfld.long 0x00 28. " IRQS668 ,IRQS Status Bit 668" "Low,High" bitfld.long 0x00 27. " IRQS667 ,IRQS Status Bit 667" "Low,High" bitfld.long 0x00 26. " IRQS666 ,IRQS Status Bit 666" "Low,High" textline " " bitfld.long 0x00 25. " IRQS665 ,IRQS Status Bit 665" "Low,High" bitfld.long 0x00 24. " IRQS664 ,IRQS Status Bit 664" "Low,High" bitfld.long 0x00 23. " IRQS663 ,IRQS Status Bit 663" "Low,High" textline " " bitfld.long 0x00 22. " IRQS662 ,IRQS Status Bit 662" "Low,High" bitfld.long 0x00 21. " IRQS661 ,IRQS Status Bit 661" "Low,High" bitfld.long 0x00 20. " IRQS660 ,IRQS Status Bit 660" "Low,High" textline " " bitfld.long 0x00 19. " IRQS659 ,IRQS Status Bit 659" "Low,High" bitfld.long 0x00 18. " IRQS658 ,IRQS Status Bit 658" "Low,High" bitfld.long 0x00 17. " IRQS657 ,IRQS Status Bit 657" "Low,High" textline " " bitfld.long 0x00 16. " IRQS656 ,IRQS Status Bit 656" "Low,High" bitfld.long 0x00 15. " IRQS655 ,IRQS Status Bit 655" "Low,High" bitfld.long 0x00 14. " IRQS654 ,IRQS Status Bit 654" "Low,High" textline " " bitfld.long 0x00 13. " IRQS653 ,IRQS Status Bit 653" "Low,High" bitfld.long 0x00 12. " IRQS652 ,IRQS Status Bit 652" "Low,High" bitfld.long 0x00 11. " IRQS651 ,IRQS Status Bit 651" "Low,High" textline " " bitfld.long 0x00 10. " IRQS650 ,IRQS Status Bit 650" "Low,High" bitfld.long 0x00 9. " IRQS649 ,IRQS Status Bit 649" "Low,High" bitfld.long 0x00 8. " IRQS648 ,IRQS Status Bit 648" "Low,High" textline " " bitfld.long 0x00 7. " IRQS647 ,IRQS Status Bit 647" "Low,High" bitfld.long 0x00 6. " IRQS646 ,IRQS Status Bit 646" "Low,High" bitfld.long 0x00 5. " IRQS645 ,IRQS Status Bit 645" "Low,High" textline " " bitfld.long 0x00 4. " IRQS644 ,IRQS Status Bit 644" "Low,High" bitfld.long 0x00 3. " IRQS643 ,IRQS Status Bit 643" "Low,High" bitfld.long 0x00 2. " IRQS642 ,IRQS Status Bit 642" "Low,High" textline " " bitfld.long 0x00 1. " IRQS641 ,IRQS Status Bit 641" "Low,High" bitfld.long 0x00 0. " IRQS640 ,IRQS Status Bit 640" "Low,High" else hgroup.long 0x0D54++0x03 hide.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x16) rgroup.long 0x0D58++0x03 line.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21" bitfld.long 0x00 31. " IRQS703 ,IRQS Status Bit 703" "Low,High" bitfld.long 0x00 30. " IRQS702 ,IRQS Status Bit 702" "Low,High" bitfld.long 0x00 29. " IRQS701 ,IRQS Status Bit 701" "Low,High" textline " " bitfld.long 0x00 28. " IRQS700 ,IRQS Status Bit 700" "Low,High" bitfld.long 0x00 27. " IRQS699 ,IRQS Status Bit 699" "Low,High" bitfld.long 0x00 26. " IRQS698 ,IRQS Status Bit 698" "Low,High" textline " " bitfld.long 0x00 25. " IRQS697 ,IRQS Status Bit 697" "Low,High" bitfld.long 0x00 24. " IRQS696 ,IRQS Status Bit 696" "Low,High" bitfld.long 0x00 23. " IRQS695 ,IRQS Status Bit 695" "Low,High" textline " " bitfld.long 0x00 22. " IRQS694 ,IRQS Status Bit 694" "Low,High" bitfld.long 0x00 21. " IRQS693 ,IRQS Status Bit 693" "Low,High" bitfld.long 0x00 20. " IRQS692 ,IRQS Status Bit 692" "Low,High" textline " " bitfld.long 0x00 19. " IRQS691 ,IRQS Status Bit 691" "Low,High" bitfld.long 0x00 18. " IRQS690 ,IRQS Status Bit 690" "Low,High" bitfld.long 0x00 17. " IRQS689 ,IRQS Status Bit 689" "Low,High" textline " " bitfld.long 0x00 16. " IRQS688 ,IRQS Status Bit 688" "Low,High" bitfld.long 0x00 15. " IRQS687 ,IRQS Status Bit 687" "Low,High" bitfld.long 0x00 14. " IRQS686 ,IRQS Status Bit 686" "Low,High" textline " " bitfld.long 0x00 13. " IRQS685 ,IRQS Status Bit 685" "Low,High" bitfld.long 0x00 12. " IRQS684 ,IRQS Status Bit 684" "Low,High" bitfld.long 0x00 11. " IRQS683 ,IRQS Status Bit 683" "Low,High" textline " " bitfld.long 0x00 10. " IRQS682 ,IRQS Status Bit 682" "Low,High" bitfld.long 0x00 9. " IRQS681 ,IRQS Status Bit 681" "Low,High" bitfld.long 0x00 8. " IRQS680 ,IRQS Status Bit 680" "Low,High" textline " " bitfld.long 0x00 7. " IRQS679 ,IRQS Status Bit 679" "Low,High" bitfld.long 0x00 6. " IRQS678 ,IRQS Status Bit 678" "Low,High" bitfld.long 0x00 5. " IRQS677 ,IRQS Status Bit 677" "Low,High" textline " " bitfld.long 0x00 4. " IRQS676 ,IRQS Status Bit 676" "Low,High" bitfld.long 0x00 3. " IRQS675 ,IRQS Status Bit 675" "Low,High" bitfld.long 0x00 2. " IRQS674 ,IRQS Status Bit 674" "Low,High" textline " " bitfld.long 0x00 1. " IRQS673 ,IRQS Status Bit 673" "Low,High" bitfld.long 0x00 0. " IRQS672 ,IRQS Status Bit 672" "Low,High" else hgroup.long 0x0D58++0x03 hide.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x17) rgroup.long 0x0D5C++0x03 line.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22" bitfld.long 0x00 31. " IRQS735 ,IRQS Status Bit 735" "Low,High" bitfld.long 0x00 30. " IRQS734 ,IRQS Status Bit 734" "Low,High" bitfld.long 0x00 29. " IRQS733 ,IRQS Status Bit 733" "Low,High" textline " " bitfld.long 0x00 28. " IRQS732 ,IRQS Status Bit 732" "Low,High" bitfld.long 0x00 27. " IRQS731 ,IRQS Status Bit 731" "Low,High" bitfld.long 0x00 26. " IRQS730 ,IRQS Status Bit 730" "Low,High" textline " " bitfld.long 0x00 25. " IRQS729 ,IRQS Status Bit 729" "Low,High" bitfld.long 0x00 24. " IRQS728 ,IRQS Status Bit 728" "Low,High" bitfld.long 0x00 23. " IRQS727 ,IRQS Status Bit 727" "Low,High" textline " " bitfld.long 0x00 22. " IRQS726 ,IRQS Status Bit 726" "Low,High" bitfld.long 0x00 21. " IRQS725 ,IRQS Status Bit 725" "Low,High" bitfld.long 0x00 20. " IRQS724 ,IRQS Status Bit 724" "Low,High" textline " " bitfld.long 0x00 19. " IRQS723 ,IRQS Status Bit 723" "Low,High" bitfld.long 0x00 18. " IRQS722 ,IRQS Status Bit 722" "Low,High" bitfld.long 0x00 17. " IRQS721 ,IRQS Status Bit 721" "Low,High" textline " " bitfld.long 0x00 16. " IRQS720 ,IRQS Status Bit 720" "Low,High" bitfld.long 0x00 15. " IRQS719 ,IRQS Status Bit 719" "Low,High" bitfld.long 0x00 14. " IRQS718 ,IRQS Status Bit 718" "Low,High" textline " " bitfld.long 0x00 13. " IRQS717 ,IRQS Status Bit 717" "Low,High" bitfld.long 0x00 12. " IRQS716 ,IRQS Status Bit 716" "Low,High" bitfld.long 0x00 11. " IRQS715 ,IRQS Status Bit 715" "Low,High" textline " " bitfld.long 0x00 10. " IRQS714 ,IRQS Status Bit 714" "Low,High" bitfld.long 0x00 9. " IRQS713 ,IRQS Status Bit 713" "Low,High" bitfld.long 0x00 8. " IRQS712 ,IRQS Status Bit 712" "Low,High" textline " " bitfld.long 0x00 7. " IRQS711 ,IRQS Status Bit 711" "Low,High" bitfld.long 0x00 6. " IRQS710 ,IRQS Status Bit 710" "Low,High" bitfld.long 0x00 5. " IRQS709 ,IRQS Status Bit 709" "Low,High" textline " " bitfld.long 0x00 4. " IRQS708 ,IRQS Status Bit 708" "Low,High" bitfld.long 0x00 3. " IRQS707 ,IRQS Status Bit 707" "Low,High" bitfld.long 0x00 2. " IRQS706 ,IRQS Status Bit 706" "Low,High" textline " " bitfld.long 0x00 1. " IRQS705 ,IRQS Status Bit 705" "Low,High" bitfld.long 0x00 0. " IRQS704 ,IRQS Status Bit 704" "Low,High" else hgroup.long 0x0D5C++0x03 hide.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x18) rgroup.long 0x060++0x03 line.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23" bitfld.long 0x00 31. " IRQS767 ,IRQS Status Bit 767" "Low,High" bitfld.long 0x00 30. " IRQS766 ,IRQS Status Bit 766" "Low,High" bitfld.long 0x00 29. " IRQS765 ,IRQS Status Bit 765" "Low,High" textline " " bitfld.long 0x00 28. " IRQS764 ,IRQS Status Bit 764" "Low,High" bitfld.long 0x00 27. " IRQS763 ,IRQS Status Bit 763" "Low,High" bitfld.long 0x00 26. " IRQS762 ,IRQS Status Bit 762" "Low,High" textline " " bitfld.long 0x00 25. " IRQS761 ,IRQS Status Bit 761" "Low,High" bitfld.long 0x00 24. " IRQS760 ,IRQS Status Bit 760" "Low,High" bitfld.long 0x00 23. " IRQS759 ,IRQS Status Bit 759" "Low,High" textline " " bitfld.long 0x00 22. " IRQS758 ,IRQS Status Bit 758" "Low,High" bitfld.long 0x00 21. " IRQS757 ,IRQS Status Bit 757" "Low,High" bitfld.long 0x00 20. " IRQS756 ,IRQS Status Bit 756" "Low,High" textline " " bitfld.long 0x00 19. " IRQS755 ,IRQS Status Bit 755" "Low,High" bitfld.long 0x00 18. " IRQS754 ,IRQS Status Bit 754" "Low,High" bitfld.long 0x00 17. " IRQS753 ,IRQS Status Bit 753" "Low,High" textline " " bitfld.long 0x00 16. " IRQS752 ,IRQS Status Bit 752" "Low,High" bitfld.long 0x00 15. " IRQS751 ,IRQS Status Bit 751" "Low,High" bitfld.long 0x00 14. " IRQS750 ,IRQS Status Bit 750" "Low,High" textline " " bitfld.long 0x00 13. " IRQS749 ,IRQS Status Bit 749" "Low,High" bitfld.long 0x00 12. " IRQS748 ,IRQS Status Bit 748" "Low,High" bitfld.long 0x00 11. " IRQS747 ,IRQS Status Bit 747" "Low,High" textline " " bitfld.long 0x00 10. " IRQS746 ,IRQS Status Bit 746" "Low,High" bitfld.long 0x00 9. " IRQS745 ,IRQS Status Bit 745" "Low,High" bitfld.long 0x00 8. " IRQS744 ,IRQS Status Bit 744" "Low,High" textline " " bitfld.long 0x00 7. " IRQS743 ,IRQS Status Bit 743" "Low,High" bitfld.long 0x00 6. " IRQS742 ,IRQS Status Bit 742" "Low,High" bitfld.long 0x00 5. " IRQS741 ,IRQS Status Bit 741" "Low,High" textline " " bitfld.long 0x00 4. " IRQS740 ,IRQS Status Bit 740" "Low,High" bitfld.long 0x00 3. " IRQS739 ,IRQS Status Bit 739" "Low,High" bitfld.long 0x00 2. " IRQS738 ,IRQS Status Bit 738" "Low,High" textline " " bitfld.long 0x00 1. " IRQS737 ,IRQS Status Bit 737" "Low,High" bitfld.long 0x00 0. " IRQS736 ,IRQS Status Bit 736" "Low,High" else hgroup.long 0x0D60++0x03 hide.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x19) rgroup.long 0x0D64++0x03 line.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24" bitfld.long 0x00 31. " IRQS799 ,IRQS Status Bit 799" "Low,High" bitfld.long 0x00 30. " IRQS798 ,IRQS Status Bit 798" "Low,High" bitfld.long 0x00 29. " IRQS797 ,IRQS Status Bit 797" "Low,High" textline " " bitfld.long 0x00 28. " IRQS796 ,IRQS Status Bit 796" "Low,High" bitfld.long 0x00 27. " IRQS795 ,IRQS Status Bit 795" "Low,High" bitfld.long 0x00 26. " IRQS794 ,IRQS Status Bit 794" "Low,High" textline " " bitfld.long 0x00 25. " IRQS793 ,IRQS Status Bit 793" "Low,High" bitfld.long 0x00 24. " IRQS792 ,IRQS Status Bit 792" "Low,High" bitfld.long 0x00 23. " IRQS791 ,IRQS Status Bit 791" "Low,High" textline " " bitfld.long 0x00 22. " IRQS790 ,IRQS Status Bit 790" "Low,High" bitfld.long 0x00 21. " IRQS789 ,IRQS Status Bit 789" "Low,High" bitfld.long 0x00 20. " IRQS788 ,IRQS Status Bit 788" "Low,High" textline " " bitfld.long 0x00 19. " IRQS787 ,IRQS Status Bit 787" "Low,High" bitfld.long 0x00 18. " IRQS786 ,IRQS Status Bit 786" "Low,High" bitfld.long 0x00 17. " IRQS785 ,IRQS Status Bit 785" "Low,High" textline " " bitfld.long 0x00 16. " IRQS784 ,IRQS Status Bit 784" "Low,High" bitfld.long 0x00 15. " IRQS783 ,IRQS Status Bit 783" "Low,High" bitfld.long 0x00 14. " IRQS782 ,IRQS Status Bit 782" "Low,High" textline " " bitfld.long 0x00 13. " IRQS781 ,IRQS Status Bit 781" "Low,High" bitfld.long 0x00 12. " IRQS780 ,IRQS Status Bit 780" "Low,High" bitfld.long 0x00 11. " IRQS779 ,IRQS Status Bit 779" "Low,High" textline " " bitfld.long 0x00 10. " IRQS778 ,IRQS Status Bit 778" "Low,High" bitfld.long 0x00 9. " IRQS777 ,IRQS Status Bit 777" "Low,High" bitfld.long 0x00 8. " IRQS776 ,IRQS Status Bit 776" "Low,High" textline " " bitfld.long 0x00 7. " IRQS775 ,IRQS Status Bit 775" "Low,High" bitfld.long 0x00 6. " IRQS774 ,IRQS Status Bit 774" "Low,High" bitfld.long 0x00 5. " IRQS773 ,IRQS Status Bit 773" "Low,High" textline " " bitfld.long 0x00 4. " IRQS772 ,IRQS Status Bit 772" "Low,High" bitfld.long 0x00 3. " IRQS771 ,IRQS Status Bit 771" "Low,High" bitfld.long 0x00 2. " IRQS770 ,IRQS Status Bit 770" "Low,High" textline " " bitfld.long 0x00 1. " IRQS769 ,IRQS Status Bit 769" "Low,High" bitfld.long 0x00 0. " IRQS768 ,IRQS Status Bit 768" "Low,High" else hgroup.long 0x0D64++0x03 hide.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1A) rgroup.long 0x0D68++0x03 line.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25" bitfld.long 0x00 31. " IRQS831 ,IRQS Status Bit 831" "Low,High" bitfld.long 0x00 30. " IRQS830 ,IRQS Status Bit 830" "Low,High" bitfld.long 0x00 29. " IRQS829 ,IRQS Status Bit 829" "Low,High" textline " " bitfld.long 0x00 28. " IRQS828 ,IRQS Status Bit 828" "Low,High" bitfld.long 0x00 27. " IRQS827 ,IRQS Status Bit 827" "Low,High" bitfld.long 0x00 26. " IRQS826 ,IRQS Status Bit 826" "Low,High" textline " " bitfld.long 0x00 25. " IRQS825 ,IRQS Status Bit 825" "Low,High" bitfld.long 0x00 24. " IRQS824 ,IRQS Status Bit 824" "Low,High" bitfld.long 0x00 23. " IRQS823 ,IRQS Status Bit 823" "Low,High" textline " " bitfld.long 0x00 22. " IRQS822 ,IRQS Status Bit 822" "Low,High" bitfld.long 0x00 21. " IRQS821 ,IRQS Status Bit 821" "Low,High" bitfld.long 0x00 20. " IRQS820 ,IRQS Status Bit 820" "Low,High" textline " " bitfld.long 0x00 19. " IRQS819 ,IRQS Status Bit 819" "Low,High" bitfld.long 0x00 18. " IRQS818 ,IRQS Status Bit 818" "Low,High" bitfld.long 0x00 17. " IRQS817 ,IRQS Status Bit 817" "Low,High" textline " " bitfld.long 0x00 16. " IRQS816 ,IRQS Status Bit 816" "Low,High" bitfld.long 0x00 15. " IRQS815 ,IRQS Status Bit 815" "Low,High" bitfld.long 0x00 14. " IRQS814 ,IRQS Status Bit 814" "Low,High" textline " " bitfld.long 0x00 13. " IRQS813 ,IRQS Status Bit 813" "Low,High" bitfld.long 0x00 12. " IRQS812 ,IRQS Status Bit 812" "Low,High" bitfld.long 0x00 11. " IRQS811 ,IRQS Status Bit 811" "Low,High" textline " " bitfld.long 0x00 10. " IRQS810 ,IRQS Status Bit 810" "Low,High" bitfld.long 0x00 9. " IRQS809 ,IRQS Status Bit 809" "Low,High" bitfld.long 0x00 8. " IRQS808 ,IRQS Status Bit 808" "Low,High" textline " " bitfld.long 0x00 7. " IRQS807 ,IRQS Status Bit 807" "Low,High" bitfld.long 0x00 6. " IRQS806 ,IRQS Status Bit 806" "Low,High" bitfld.long 0x00 5. " IRQS805 ,IRQS Status Bit 805" "Low,High" textline " " bitfld.long 0x00 4. " IRQS804 ,IRQS Status Bit 804" "Low,High" bitfld.long 0x00 3. " IRQS803 ,IRQS Status Bit 803" "Low,High" bitfld.long 0x00 2. " IRQS802 ,IRQS Status Bit 802" "Low,High" textline " " bitfld.long 0x00 1. " IRQS801 ,IRQS Status Bit 801" "Low,High" bitfld.long 0x00 0. " IRQS800 ,IRQS Status Bit 800" "Low,High" else hgroup.long 0x0D68++0x03 hide.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1B) rgroup.long 0x0D6C++0x03 line.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26" bitfld.long 0x00 31. " IRQS863 ,IRQS Status Bit 863" "Low,High" bitfld.long 0x00 30. " IRQS862 ,IRQS Status Bit 862" "Low,High" bitfld.long 0x00 29. " IRQS861 ,IRQS Status Bit 861" "Low,High" textline " " bitfld.long 0x00 28. " IRQS860 ,IRQS Status Bit 860" "Low,High" bitfld.long 0x00 27. " IRQS859 ,IRQS Status Bit 859" "Low,High" bitfld.long 0x00 26. " IRQS858 ,IRQS Status Bit 858" "Low,High" textline " " bitfld.long 0x00 25. " IRQS857 ,IRQS Status Bit 857" "Low,High" bitfld.long 0x00 24. " IRQS856 ,IRQS Status Bit 856" "Low,High" bitfld.long 0x00 23. " IRQS855 ,IRQS Status Bit 855" "Low,High" textline " " bitfld.long 0x00 22. " IRQS854 ,IRQS Status Bit 854" "Low,High" bitfld.long 0x00 21. " IRQS853 ,IRQS Status Bit 853" "Low,High" bitfld.long 0x00 20. " IRQS852 ,IRQS Status Bit 852" "Low,High" textline " " bitfld.long 0x00 19. " IRQS851 ,IRQS Status Bit 851" "Low,High" bitfld.long 0x00 18. " IRQS850 ,IRQS Status Bit 850" "Low,High" bitfld.long 0x00 17. " IRQS849 ,IRQS Status Bit 849" "Low,High" textline " " bitfld.long 0x00 16. " IRQS848 ,IRQS Status Bit 848" "Low,High" bitfld.long 0x00 15. " IRQS847 ,IRQS Status Bit 847" "Low,High" bitfld.long 0x00 14. " IRQS846 ,IRQS Status Bit 846" "Low,High" textline " " bitfld.long 0x00 13. " IRQS845 ,IRQS Status Bit 845" "Low,High" bitfld.long 0x00 12. " IRQS844 ,IRQS Status Bit 844" "Low,High" bitfld.long 0x00 11. " IRQS843 ,IRQS Status Bit 843" "Low,High" textline " " bitfld.long 0x00 10. " IRQS842 ,IRQS Status Bit 842" "Low,High" bitfld.long 0x00 9. " IRQS841 ,IRQS Status Bit 841" "Low,High" bitfld.long 0x00 8. " IRQS840 ,IRQS Status Bit 840" "Low,High" textline " " bitfld.long 0x00 7. " IRQS839 ,IRQS Status Bit 839" "Low,High" bitfld.long 0x00 6. " IRQS838 ,IRQS Status Bit 838" "Low,High" bitfld.long 0x00 5. " IRQS837 ,IRQS Status Bit 837" "Low,High" textline " " bitfld.long 0x00 4. " IRQS836 ,IRQS Status Bit 836" "Low,High" bitfld.long 0x00 3. " IRQS835 ,IRQS Status Bit 835" "Low,High" bitfld.long 0x00 2. " IRQS834 ,IRQS Status Bit 834" "Low,High" textline " " bitfld.long 0x00 1. " IRQS833 ,IRQS Status Bit 833" "Low,High" bitfld.long 0x00 0. " IRQS832 ,IRQS Status Bit 832" "Low,High" else hgroup.long 0x0D6C++0x03 hide.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1C) rgroup.long 0x0D70++0x03 line.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27" bitfld.long 0x00 31. " IRQS895 ,IRQS Status Bit 895" "Low,High" bitfld.long 0x00 30. " IRQS894 ,IRQS Status Bit 894" "Low,High" bitfld.long 0x00 29. " IRQS893 ,IRQS Status Bit 893" "Low,High" textline " " bitfld.long 0x00 28. " IRQS892 ,IRQS Status Bit 892" "Low,High" bitfld.long 0x00 27. " IRQS891 ,IRQS Status Bit 891" "Low,High" bitfld.long 0x00 26. " IRQS890 ,IRQS Status Bit 890" "Low,High" textline " " bitfld.long 0x00 25. " IRQS889 ,IRQS Status Bit 889" "Low,High" bitfld.long 0x00 24. " IRQS888 ,IRQS Status Bit 888" "Low,High" bitfld.long 0x00 23. " IRQS887 ,IRQS Status Bit 887" "Low,High" textline " " bitfld.long 0x00 22. " IRQS886 ,IRQS Status Bit 886" "Low,High" bitfld.long 0x00 21. " IRQS885 ,IRQS Status Bit 885" "Low,High" bitfld.long 0x00 20. " IRQS884 ,IRQS Status Bit 884" "Low,High" textline " " bitfld.long 0x00 19. " IRQS883 ,IRQS Status Bit 883" "Low,High" bitfld.long 0x00 18. " IRQS882 ,IRQS Status Bit 882" "Low,High" bitfld.long 0x00 17. " IRQS881 ,IRQS Status Bit 881" "Low,High" textline " " bitfld.long 0x00 16. " IRQS880 ,IRQS Status Bit 880" "Low,High" bitfld.long 0x00 15. " IRQS879 ,IRQS Status Bit 879" "Low,High" bitfld.long 0x00 14. " IRQS878 ,IRQS Status Bit 878" "Low,High" textline " " bitfld.long 0x00 13. " IRQS877 ,IRQS Status Bit 877" "Low,High" bitfld.long 0x00 12. " IRQS876 ,IRQS Status Bit 876" "Low,High" bitfld.long 0x00 11. " IRQS875 ,IRQS Status Bit 875" "Low,High" textline " " bitfld.long 0x00 10. " IRQS874 ,IRQS Status Bit 874" "Low,High" bitfld.long 0x00 9. " IRQS873 ,IRQS Status Bit 873" "Low,High" bitfld.long 0x00 8. " IRQS872 ,IRQS Status Bit 872" "Low,High" textline " " bitfld.long 0x00 7. " IRQS871 ,IRQS Status Bit 871" "Low,High" bitfld.long 0x00 6. " IRQS870 ,IRQS Status Bit 870" "Low,High" bitfld.long 0x00 5. " IRQS869 ,IRQS Status Bit 869" "Low,High" textline " " bitfld.long 0x00 4. " IRQS868 ,IRQS Status Bit 868" "Low,High" bitfld.long 0x00 3. " IRQS867 ,IRQS Status Bit 867" "Low,High" bitfld.long 0x00 2. " IRQS866 ,IRQS Status Bit 866" "Low,High" textline " " bitfld.long 0x00 1. " IRQS865 ,IRQS Status Bit 865" "Low,High" bitfld.long 0x00 0. " IRQS864 ,IRQS Status Bit 864" "Low,High" else hgroup.long 0x0D70++0x03 hide.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1D) rgroup.long 0x0D74++0x03 line.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28" bitfld.long 0x00 31. " IRQS927 ,IRQS Status Bit 927" "Low,High" bitfld.long 0x00 30. " IRQS926 ,IRQS Status Bit 926" "Low,High" bitfld.long 0x00 29. " IRQS925 ,IRQS Status Bit 925" "Low,High" textline " " bitfld.long 0x00 28. " IRQS924 ,IRQS Status Bit 924" "Low,High" bitfld.long 0x00 27. " IRQS923 ,IRQS Status Bit 923" "Low,High" bitfld.long 0x00 26. " IRQS922 ,IRQS Status Bit 922" "Low,High" textline " " bitfld.long 0x00 25. " IRQS921 ,IRQS Status Bit 921" "Low,High" bitfld.long 0x00 24. " IRQS920 ,IRQS Status Bit 920" "Low,High" bitfld.long 0x00 23. " IRQS919 ,IRQS Status Bit 919" "Low,High" textline " " bitfld.long 0x00 22. " IRQS918 ,IRQS Status Bit 918" "Low,High" bitfld.long 0x00 21. " IRQS917 ,IRQS Status Bit 917" "Low,High" bitfld.long 0x00 20. " IRQS916 ,IRQS Status Bit 916" "Low,High" textline " " bitfld.long 0x00 19. " IRQS915 ,IRQS Status Bit 915" "Low,High" bitfld.long 0x00 18. " IRQS914 ,IRQS Status Bit 914" "Low,High" bitfld.long 0x00 17. " IRQS913 ,IRQS Status Bit 913" "Low,High" textline " " bitfld.long 0x00 16. " IRQS912 ,IRQS Status Bit 912" "Low,High" bitfld.long 0x00 15. " IRQS911 ,IRQS Status Bit 911" "Low,High" bitfld.long 0x00 14. " IRQS910 ,IRQS Status Bit 910" "Low,High" textline " " bitfld.long 0x00 13. " IRQS909 ,IRQS Status Bit 909" "Low,High" bitfld.long 0x00 12. " IRQS908 ,IRQS Status Bit 908" "Low,High" bitfld.long 0x00 11. " IRQS907 ,IRQS Status Bit 907" "Low,High" textline " " bitfld.long 0x00 10. " IRQS906 ,IRQS Status Bit 906" "Low,High" bitfld.long 0x00 9. " IRQS905 ,IRQS Status Bit 905" "Low,High" bitfld.long 0x00 8. " IRQS904 ,IRQS Status Bit 904" "Low,High" textline " " bitfld.long 0x00 7. " IRQS903 ,IRQS Status Bit 903" "Low,High" bitfld.long 0x00 6. " IRQS902 ,IRQS Status Bit 902" "Low,High" bitfld.long 0x00 5. " IRQS901 ,IRQS Status Bit 901" "Low,High" textline " " bitfld.long 0x00 4. " IRQS900 ,IRQS Status Bit 900" "Low,High" bitfld.long 0x00 3. " IRQS899 ,IRQS Status Bit 899" "Low,High" bitfld.long 0x00 2. " IRQS898 ,IRQS Status Bit 898" "Low,High" textline " " bitfld.long 0x00 1. " IRQS897 ,IRQS Status Bit 897" "Low,High" bitfld.long 0x00 0. " IRQS896 ,IRQS Status Bit 896" "Low,High" else hgroup.long 0x0D74++0x03 hide.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1E) rgroup.long 0x0D78++0x03 line.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29" bitfld.long 0x00 31. " IRQS959 ,IRQS Status Bit 959" "Low,High" bitfld.long 0x00 30. " IRQS958 ,IRQS Status Bit 958" "Low,High" bitfld.long 0x00 29. " IRQS957 ,IRQS Status Bit 957" "Low,High" textline " " bitfld.long 0x00 28. " IRQS956 ,IRQS Status Bit 956" "Low,High" bitfld.long 0x00 27. " IRQS955 ,IRQS Status Bit 955" "Low,High" bitfld.long 0x00 26. " IRQS954 ,IRQS Status Bit 954" "Low,High" textline " " bitfld.long 0x00 25. " IRQS953 ,IRQS Status Bit 953" "Low,High" bitfld.long 0x00 24. " IRQS952 ,IRQS Status Bit 952" "Low,High" bitfld.long 0x00 23. " IRQS951 ,IRQS Status Bit 951" "Low,High" textline " " bitfld.long 0x00 22. " IRQS950 ,IRQS Status Bit 950" "Low,High" bitfld.long 0x00 21. " IRQS949 ,IRQS Status Bit 949" "Low,High" bitfld.long 0x00 20. " IRQS948 ,IRQS Status Bit 948" "Low,High" textline " " bitfld.long 0x00 19. " IRQS947 ,IRQS Status Bit 947" "Low,High" bitfld.long 0x00 18. " IRQS946 ,IRQS Status Bit 946" "Low,High" bitfld.long 0x00 17. " IRQS945 ,IRQS Status Bit 945" "Low,High" textline " " bitfld.long 0x00 16. " IRQS944 ,IRQS Status Bit 944" "Low,High" bitfld.long 0x00 15. " IRQS943 ,IRQS Status Bit 943" "Low,High" bitfld.long 0x00 14. " IRQS942 ,IRQS Status Bit 942" "Low,High" textline " " bitfld.long 0x00 13. " IRQS941 ,IRQS Status Bit 941" "Low,High" bitfld.long 0x00 12. " IRQS940 ,IRQS Status Bit 940" "Low,High" bitfld.long 0x00 11. " IRQS939 ,IRQS Status Bit 939" "Low,High" textline " " bitfld.long 0x00 10. " IRQS938 ,IRQS Status Bit 938" "Low,High" bitfld.long 0x00 9. " IRQS937 ,IRQS Status Bit 937" "Low,High" bitfld.long 0x00 8. " IRQS936 ,IRQS Status Bit 936" "Low,High" textline " " bitfld.long 0x00 7. " IRQS935 ,IRQS Status Bit 935" "Low,High" bitfld.long 0x00 6. " IRQS934 ,IRQS Status Bit 934" "Low,High" bitfld.long 0x00 5. " IRQS933 ,IRQS Status Bit 933" "Low,High" textline " " bitfld.long 0x00 4. " IRQS932 ,IRQS Status Bit 932" "Low,High" bitfld.long 0x00 3. " IRQS931 ,IRQS Status Bit 931" "Low,High" bitfld.long 0x00 2. " IRQS930 ,IRQS Status Bit 930" "Low,High" textline " " bitfld.long 0x00 1. " IRQS929 ,IRQS Status Bit 929" "Low,High" bitfld.long 0x00 0. " IRQS928 ,IRQS Status Bit 928" "Low,High" else hgroup.long 0x0D78++0x03 hide.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((d.l(AD:0xfffed000+0x04))&0x0000001F)>=0x1F) rgroup.long 0x0D7C++0x03 line.long 0x0 "GICD_SPISR30,Shared Peripheral Interrupt Status Register 30" bitfld.long 0x00 27. " IRQS987 ,IRQS Status Bit 987" "Low,High" bitfld.long 0x00 26. " IRQS986 ,IRQS Status Bit 986" "Low,High" textline " " bitfld.long 0x00 25. " IRQS985 ,IRQS Status Bit 985" "Low,High" bitfld.long 0x00 24. " IRQS984 ,IRQS Status Bit 984" "Low,High" bitfld.long 0x00 23. " IRQS983 ,IRQS Status Bit 983" "Low,High" textline " " bitfld.long 0x00 22. " IRQS982 ,IRQS Status Bit 982" "Low,High" bitfld.long 0x00 21. " IRQS981 ,IRQS Status Bit 981" "Low,High" bitfld.long 0x00 20. " IRQS980 ,IRQS Status Bit 980" "Low,High" textline " " bitfld.long 0x00 19. " IRQS979 ,IRQS Status Bit 979" "Low,High" bitfld.long 0x00 18. " IRQS978 ,IRQS Status Bit 978" "Low,High" bitfld.long 0x00 17. " IRQS977 ,IRQS Status Bit 977" "Low,High" textline " " bitfld.long 0x00 16. " IRQS976 ,IRQS Status Bit 976" "Low,High" bitfld.long 0x00 15. " IRQS975 ,IRQS Status Bit 975" "Low,High" bitfld.long 0x00 14. " IRQS974 ,IRQS Status Bit 974" "Low,High" textline " " bitfld.long 0x00 13. " IRQS973 ,IRQS Status Bit 973" "Low,High" bitfld.long 0x00 12. " IRQS972 ,IRQS Status Bit 972" "Low,High" bitfld.long 0x00 11. " IRQS971 ,IRQS Status Bit 971" "Low,High" textline " " bitfld.long 0x00 10. " IRQS970 ,IRQS Status Bit 970" "Low,High" bitfld.long 0x00 9. " IRQS969 ,IRQS Status Bit 969" "Low,High" bitfld.long 0x00 8. " IRQS968 ,IRQS Status Bit 968" "Low,High" textline " " bitfld.long 0x00 7. " IRQS967 ,IRQS Status Bit 967" "Low,High" bitfld.long 0x00 6. " IRQS966 ,IRQS Status Bit 966" "Low,High" bitfld.long 0x00 5. " IRQS965 ,IRQS Status Bit 965" "Low,High" textline " " bitfld.long 0x00 4. " IRQS964 ,IRQS Status Bit 964" "Low,High" bitfld.long 0x00 3. " IRQS963 ,IRQS Status Bit 963" "Low,High" bitfld.long 0x00 2. " IRQS962 ,IRQS Status Bit 962" "Low,High" textline " " bitfld.long 0x00 1. " IRQS961 ,IRQS Status Bit 961" "Low,High" bitfld.long 0x00 0. " IRQS960 ,IRQS Status Bit 960" "Low,High" else hgroup.long 0x0D7C++0x03 hide.long 0x0 "GICD_SPISR30,Shared Peripheral Interrupt Status Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 25. tree "Software Generated Interrupt" if (((d.l(AD:0xfffed000+0x04))&0x400)==0x400) wgroup.long 0x0F00++0x03 line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register" bitfld.long 0x00 24.--25. " TLF ,Target List Filter" "TargetList,All CPUs,Request CPU,?..." hexmask.long.byte 0x00 16.--23. 1. " CPUTL ,CPU Target List" textline " " bitfld.long 0x00 15. " NSATT ,NSATT" "Secure,Non-secure" bitfld.long 0x00 0.--3. " SGINTID ,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" else wgroup.long 0x0F00++0x03 line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register" bitfld.long 0x00 24.--25. " TLF ,Target List Filter" "TargetList,All CPUs,Request CPU,?..." hexmask.long.byte 0x00 16.--23. 1. " CPUTL ,CPU Target List" textline " " bitfld.long 0x00 0.--3. " SGINTID ,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" endif tree.end width 12. tree "Peripheral/Component ID Registers" rgroup.byte 0x0FE0++0x00 line.byte 0x00 "GICD_PIDR0,Peripheral ID0 Register" hexmask.byte 0x00 0.--7. 1. " PART_NUMBER_0 ,Returns 0x90" rgroup.byte 0x0FE4++0x00 line.byte 0x00 "GICD_PIDR1,Peripheral ID1 Register" bitfld.byte 0x00 4.--7. " JEP106_ID_3_0 ,JEP106 identity code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " PART_NUMBER_1 ,Returns 0x3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FE8++0x00 line.byte 0x00 "GICD_PIDR2,Peripheral ID2 Register" bitfld.byte 0x00 4.--7. " ARCHITECTURE ,Identifies the architecture version of the GIC" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 3. " JEDEC_USED ,This indicates that the GIC uses a manufacturers identity code that was allocated by JEDEC according to JEP106" "Low,High" bitfld.byte 0x00 0.--2. " JEP106_ID_CODE ,JEP106 identity code field" "0,1,2,3,4,5,6,7" rgroup.byte 0x0FEC++0x00 line.byte 0x00 "GICD_PIDR3,Peripheral ID3 Register" bitfld.byte 0x00 4.--7. " REVAND ,The top-level RTL provides four AND gates that are tied-off to provide an output value of 0x0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " MOD_NUMBER ,The customer can update this field if they modify the RTL of the GIC" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FD0++0x00 line.byte 0x00 "GICD_PIDR4,Peripheral ID4 Register" bitfld.byte 0x00 4.--7. " 4KB_COUNT ,The number of 4KB address blocks you require to access the registers expressed in powers of 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " JEP106_C_CODE ,The JEP106 continuation code value represents how many 0x7F continuation characters occur in the manufacturers identity code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FD4++0x00 line.byte 0x00 "GICD_PIDR5,Peripheral ID5 Register" bitfld.byte 0x00 5.--7. " PPI_NUMBER_0 ,The LSBs of the number of PPIs that the GIC provides" "0,1,2,3,4,5,6,7" bitfld.byte 0x00 0.--4. " SGI_NUMBER ,The number of SGIs that the GIC provides" "None,INTID0,INTID[1:0],INTID[2:0],INTID[3:0],INTID[4:0],INTID[5:0],INTID[6:0],INTID[7:0],INTID[8:0],INTID[9:0],INTID[10:0],INTID[11:0],INTID[12:0],INTID[13:0],INTID[14:0],INTID[15:0],?..." rgroup.byte 0x0FD8++0x00 line.byte 0x00 "GICD_PIDR6,Peripheral ID6 Register" bitfld.byte 0x00 2.--7. " SPI_NUMBER_0 ,The LSBs of the number of SPIs that the GIC provides" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.byte 0x00 0.--1. " PPI_NUMBER_1 ,The MSBs of the number of PPIs that the GIC provides" "0,1,2,3" rgroup.byte 0x0FDC++0x00 line.byte 0x00 "GICD_PIDR7,Peripheral ID7 Register" bitfld.byte 0x00 7. " TZ ,Identifies the number of security states that the GIC supports" "S,NS&S" bitfld.byte 0x00 4.--6. " PRIORITY ,The number of priority levels that the GIC provides" "16,32,64,128,256,?..." bitfld.byte 0x00 0.--3. " SPI_NUMBER_1 ,The MSBs of the number of SPIs that the GIC provides" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FC0++0x00 line.byte 0x00 "GICD_PIDR8,Peripheral ID8 Register" bitfld.byte 0x00 7. " IDENTIFIER ,Identifies the AMBA interface that this register belongs to" "Distributor,CPU Interface" bitfld.byte 0x00 5.--6. " IF_TYPE ,Identifies the AMBA protocol that the GIC supports" "AXI,AHB-Lite,?..." bitfld.byte 0x00 2.--4. " CPU_IF ,Identifies the number of CPU Interfaces that the GIC contains" "1,2,3,4,5,6,7,8" textline " " bitfld.byte 0x00 1. " FIQ_LEGACY ,Identifies if the GIC provides a legacy FIQ input signal for each CPU Interface" "Not supported,Supported" bitfld.byte 0x00 0. " IRQ_LEGACY ,Identifies if the GIC provides a legacy IRQ input signal for each CPU Interface" "Not supported,Supported" tree.end tree.end base AD:0xfffec100 width 17. tree "CPU Interface" if (((d.l(AD:0xfffed000+0x04))&0x400)==0x0) group.long 0x0000++0x03 line.long 0x00 "GICC_CTLR,CPU Interface Control Register" bitfld.long 0x00 0. " ENABLE ,Enable for the signaling of Group 1 interrupts by the CPU interface to the connected processor" "Disabled,Enabled" textline " " textline " " textline " " else group.long 0x0000++0x03 line.long 0x00 "GICC_CTLR,CPU Interface Control Register (Non-secure access)" bitfld.long 0x00 0. " ENABLE ,Enable for the signaling of Group 1 interrupts by the CPU interface to the connected processor" "Disabled,Enabled" textline " " textline " " textline " " endif group.long 0x0004++0x03 line.long 0x00 "GICC_PMR,Interrupt Priority Mask Register" hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,Priority mask level for CPU interface" if (((d.l(AD:0xfffed000+0x04))&0x400)==0x400) group.long 0x0008++0x03 line.long 0x00 "GICC_BPR,Binary Point Register (Non-secure access)" bitfld.long 0x00 0.--2. " BINARY_POINT ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "Reserved,Reserved,Reserved,[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" else group.long 0x0008++0x03 line.long 0x00 "GICC_BPR,Binary Point Register" bitfld.long 0x00 0.--2. " BINARY_POINT ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "Reserved,Reserved,Reserved,[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" endif hgroup.long 0x000C++0x03 hide.long 0x00 "GICC_IAR,Interrupt Acknowledge Register" in wgroup.long 0x0010++0x03 line.long 0x00 "GICC_EOIR,End Of Interrupt Register" bitfld.long 0x00 10.--12. " CPUID ,On a multiprocessor implementation if the write refers to an SGI this field contains the CPUID value from the corresponding GICC_IAR access" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 0.--9. 1. " EOIINTID ,The Interrupt ID value from the corresponding GICC_IAR access" rgroup.long 0x0014++0x03 line.long 0x00 "GICC_RPR,Running Priority Register" hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,The current running priority on the CPU interface" rgroup.long 0x0018++0x03 line.long 0x00 "GICC_HPIR,Highest Priority Pending Interrupt Register" bitfld.long 0x00 10.--12. " CPUID ,On a multiprocessor implementation if the PENDINTID field returns the ID of an SGI this field contains the CPUID value for that interrupt" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 0.--9. 1. " PENDINTID ,The interrupt ID of the highest priority pending interrupt" if (((d.l(AD:0xfffed000+0x04))&0x400)==0x400) group.long 0x001C++0x03 line.long 0x00 "GICC_ABPR,Aliased Binary Point Register" bitfld.long 0x00 0.--2. " BINARY_POINT ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" else hgroup.long 0x001C++0x03 hide.long 0x00 "GICC_ABPR,Aliased Binary Point Register" endif rgroup.long 0x00FC++0x03 line.long 0x00 "GICC_IIDR,CPU and Virtual CPU Interface Identification Register" hexmask.long.word 0x00 20.--31. 1. " PRODID ,Product ID" bitfld.long 0x00 16.--19. " ARCH_VER ,Identifies the architecture version of the GIC" "GICv1,GICv1,GICv2,GICv2,?..." textline " " bitfld.long 0x00 12.--15. " REV ,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" tree.end width 0x0B tree.end tree.end tree "STM (CoreSight System Trace Macrocell)" base ad:0xFC000000 width 12. group.long 0xC10++0x3 line.long 0x00 "DMACTLR,DMA Control Register" bitfld.long 0x00 2.--3. " SENS ,DMA request to the current buffer level sensitivity" "<25%,<50%,<75%,<100%" rgroup.long 0xDF4++0x3 line.long 0x00 "HEMASTR,Hardware Event Master Number Register" hexmask.long.word 0x00 0.--15. 1. " MASTER ,STPv2 hardware event trace master number" rgroup.long 0xDF8++0x7 line.long 0x00 "HEFEAT1R,Hardware Event Features 1 Register" hexmask.long.word 0x00 15.--23. 1. " NUMHE ,Number of hardware events" bitfld.long 0x00 4.--5. " HECOMP ,Data compression on hardware event tracing support" "Reserved,Reserved,Reserved,Implemented" bitfld.long 0x00 3. " HEMASTR ,HEMASTR support" "Disabled,Enabled" textline " " bitfld.long 0x00 2. " HEERR ,Hardware event error detection support" "Disabled,Enabled" bitfld.long 0x00 0. " HETER ,HETER support" "Disabled,Enabled" line.long 0x04 "HEIDR,Hardware Event Features ID Register" bitfld.long 0x04 8.--11. " VENDSPEC ,Vendor specific modifications or mappings" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4.--7. " CLASSREV ,Revision of the programmers model" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 0.--3. " CLASS ,Programmers model" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xE80++0x3 line.long 0x00 "TCSR,Trace Control and Status Register" bitfld.long 0x00 23. " BUSY ,STM busy" "Not busy,Busy" hexmask.long.byte 0x00 16.--22. 1. " TRACEID ,ATB Trace ID" bitfld.long 0x00 5. " COMPEN ,Stimulus Ports Compression Enable " "Disabled,Enabled" textline " " bitfld.long 0x00 2. " SYNCEN ,STMSYNCR is implemented" "Reserved,Implemented" bitfld.long 0x00 1. " TSEN ,Timestamp request ignore status" "Disabled,Enabled" bitfld.long 0x00 0. " EN ,Global STM enable" "Disabled,Enabled" group.long 0xE94++0x3 line.long 0x00 "AUXCR,Auxiliary Control Register" bitfld.long 0x00 4. " AFREADYHIGH ,AFREADY Override Status" "No override,Override" bitfld.long 0x00 3. " CLKON ,Architectural clock gate enable" "Disabled,Enabled" bitfld.long 0x00 2. " PRIORINVDIS ,Controls arbitration between AXI and HW during flush" "Inverted,Not inverted" textline " " bitfld.long 0x00 1. " ASYNCPE ,ASYNC priority" "Low,High" bitfld.long 0x00 0. " FIFOAF ,Auto-flush" "Disabled,Enabled" rgroup.long 0xEA0++0xB line.long 0x00 "SPFEAT1R,STM Features 1 Register" bitfld.long 0x00 22.--23. " SWOEN ,STMTCSR.SWOEN support" "Reserved,Not implemented,?..." bitfld.long 0x00 20.--21. " SYNCEN ,STMTCSR.SYNCEN support" "Reserved,Reserved,Implemented,?..." bitfld.long 0x00 18.--19. " HWTEN ,STMTCSR.HWTEN support" "Reserved,Not implemented,?..." textline " " bitfld.long 0x00 16.--17. " TSPRESCALE ,Timestamp prescale support" "Reserved,Not implemented,?..." bitfld.long 0x00 14.--15. " TRIGCTL ,Trigger control support" "Reserved,Reserved,Implemented,?..." bitfld.long 0x00 10.--13. " TRACEBUS ,Trace bus support" "Reserved,Implemented,?..." textline " " bitfld.long 0x00 8.--9. " SYNC ,STMSYNCR support" "Reserved,Reserved,Reserved,Implemented" bitfld.long 0x00 7. " FORCETS ,STMTSSTIMR support" "Reserved,Implemented" bitfld.long 0x00 6. " TSFREQ ,Timestamp frequency indication configuration" "Reserved,Read-write" textline " " bitfld.long 0x00 4.--5. " TS ,Timestamp support" "Reserved,Implemented,?..." bitfld.long 0x00 0.--3. " PROT ,Protocol" "Reserved,STPv2,?..." line.long 0x04 "SPFEAT2R,STM Features 2 Register" bitfld.long 0x04 16.--17. " SPTYPE ,Stimulus port type support" "Reserved,Extended only,?..." bitfld.long 0x04 12.--15. " DSIZE ,Fundamental data size" "32-bit data,?..." bitfld.long 0x04 9.--10. " SPTRTYPE ,Stimulus port transaction type support" "Reserved,Reserved,Both supported,?..." textline " " bitfld.long 0x04 7.--8. " PRIVMASK ,PRIVMASKR support" "Reserved,Not implemented,?..." bitfld.long 0x04 6. " SPOVERRIDE ,SPOVERRIDER support" "Reserved,Implemented" bitfld.long 0x04 4.--5. " SPCOMP ,Data compression on stimulus ports support" "Reserved,Reserved,Reserved,Implemented" textline " " bitfld.long 0x04 2. " SPER ,SPER presence" "Implemented,?..." bitfld.long 0x04 0.--1. " SPTER ,SPTER support" "Reserved,Reserved,Implemented,?..." line.long 0x08 "SPFEAT3R,STM Features 3 Register" hexmask.long.byte 0x08 0.--6. 1. " NUMMAST ,Number of stimulus ports masters implemented" wgroup.long 0xEE8++0x7 line.long 0x00 "ITTRIGGER,Integration Test for Cross-Trigger Outputs Register" bitfld.long 0x00 3. " ASYNCOUT_W ,ASYNCOUT output set" "0,1" bitfld.long 0x00 2. " TRIGOUTHETE_W ,TRIGOUTHETE output set" "0,1" bitfld.long 0x00 1. " TRIGOUTSW_W ,TRIGOUTSW output set" "0,1" textline " " bitfld.long 0x00 0. " TRIGOUTSPTE_W ,TRIGOUTSPTE output set" "0,1" line.long 0x04 "ITATBDATA0,Integration Mode ATB Data 0 Register" bitfld.long 0x04 4. " ATDATAM31_W ,ATDATAM[31] output set" "0,1" bitfld.long 0x04 3. " ATDATAM23_W ,ATDATAM[23] output set" "0,1" bitfld.long 0x04 2. " ATDATAM15_W ,ATDATAM[15] output set" "0,1" textline " " bitfld.long 0x04 1. " ATDATAM7_W ,ATDATAM[7] output set" "0,1" bitfld.long 0x04 0. " ATDATAM0_W ,ATDATAM[0] output set" "0,1" rgroup.long 0xEF0++0x3 line.long 0x00 "ITATBCTR2,Integration Mode ATB Control 2 Register" bitfld.long 0x00 1. " AFVALIDM_R ,AFVALIDM input set" "0,1" bitfld.long 0x00 0. " ATREADYM_R ,ATREADYM input set" "0,1" wgroup.long 0xEF4++0x7 line.long 0x00 "ITATBID,Integration Mode ATB Identification Register" hexmask.long.byte 0x00 0.--6. 1. " ATIDM_W ,ATIDM output set" line.long 0x04 "ITATBCTR0,Integration Mode ATB Control 0 Register" bitfld.long 0x04 8.--9. " ATBYTESM_W ,ATBYTESM output set" "b'00,b'01,b'10,b'11" bitfld.long 0x04 1. " AFREADYM_W ,AFREADYM output set" "0,1" bitfld.long 0x04 0. " ATVALIDM_W ,ATVALIDM output set" "0,1" group.long 0xF00++0x3 line.long 0x00 "ITCTRL,Integration Mode Control Register" bitfld.long 0x00 0. " INTEGRATION_MODE ,Integration mode enable" "Disabled,Enabled" wgroup.long 0xFB0++0x3 line.long 0x00 "LAR,Lock Access Register" rgroup.long 0xFB4++0x7 line.long 0x00 "LSR,Lock Status Register" bitfld.long 0x00 2. " TYPE ,Lock Access Register implementation type" "32-bit LAR,8-bit LAR" bitfld.long 0x00 1. " LOCKED ,Lock current status" "Not locked,Locked" bitfld.long 0x00 0. " PRESENT ,Lock control mechanism exist status" "No lock,Lock" line.long 0x04 "AUTHSTATUS,Authentication Status Register" bitfld.long 0x04 6.--7. " SNID ,Secure non-invasive debug level" "Reserved,Reserved,Disabled,Enabled" bitfld.long 0x04 4.--5. " SID ,Secure invasive debug level" "Reserved,Reserved,Disabled,Enabled" bitfld.long 0x04 2.--3. " NSNID ,Non-secure non-invasive debug level" "Reserved,Reserved,Disabled,Enabled" textline " " bitfld.long 0x04 0.--1. " NSID ,Non-secure invasive debug level" "Reserved,Reserved,Disabled,Enabled" rgroup.long 0xFC8++0x7 line.long 0x00 "DEVID,Device Configuration Register" hexmask.long.tbyte 0x00 0.--16. 1. " NUMSP ,Number of stimulus ports implemented" line.long 0x04 "DEVTYPE,Device Type Identifier Register" bitfld.long 0x04 4.--7. " SUB_TYPE ,Sub-classification within the major category" "0,1,2,3,4,5,trace based stimulus,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 0.--3. " MAJOR_TYPE ,Major classification grouping" "0,1,2,ATB output,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFE0++0x13 line.long 0x00 "PIDR0,Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PART_NUMBER_BITS7TO0 ,Component part number" line.long 0x04 "PIDR1,Peripheral ID1 Register" bitfld.long 0x04 4.--7. " JEP106_BITS3TO0 ,JEDEC identity code indicating the designer of the component" "0,1,2,3,4,5,6,7,8,Upper 4 bits,10,Lowest 4 bits,12,13,14,15" bitfld.long 0x04 0.--3. " PART_NUMBER_BITS11TO8 ,Component part number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "PIDR2,Peripheral ID2 Register" bitfld.long 0x08 4.--7. " REVISION ,Revision" "Reserved,r0p1,?..." bitfld.long 0x08 3. " JEDEC ,JEDEC" "Reserved,JEDEC" bitfld.long 0x08 0.--2. " JEP106_BITS6TO4 ,JEDEC identity code bits[6:4]" "Reserved,Reserved,Reserved,Upper 3 bits,?..." line.long 0x0C "PIDR3,Peripheral ID3 Register" bitfld.long 0x0C 4.--7. " REVAND ,Minor errata fixes" "No metal fixes,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0C 0.--3. " CUSTOMER_MODIFIED ,Customer modification" "No modifications,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x10 "PIDR4,Peripheral ID4 Register" bitfld.long 0x10 4.--7. " FOURKB_COUNT ,Memory window total contiguous size" "4KB,8KB,16KB,32KB,64KB,128KB,256KB,512KB,1024KB,2048KB,4096KB,8192KB,16384KB,32768KB,65536KB,131072KB" bitfld.long 0x10 0.--3. " JEP106_CONT ,JEDEC continuation code" "Reserved,Reserved,Reserved,Reserved,5th bank,?..." rgroup.long 0xFF0++0xF line.long 0x00 "CIDR0,Component ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PREAMBLE ,Component identification" line.long 0x04 "CIDR1,Component ID1 Register" bitfld.long 0x04 4.--7. " CLASS ,Class of the component" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,CoreSight,?..." bitfld.long 0x04 0.--3. " PREAMBLE ,Component identification" "Identification,?..." line.long 0x08 "CIDR2,Component ID2 Register" hexmask.long.byte 0x08 0.--7. 1. " PREAMBLE ,Component identification" line.long 0x0C "CIDR3,Component ID3 Register" hexmask.long.byte 0x0C 0.--7. 1. " PREAMBLE ,Component identification" width 0xB tree.end tree "DAP (Debug Access Port)" base ad:0xFF000000 width 11. tree "Common registers" wgroup.long 0x00++0x3 line.long 0x00 "ABORT,AP Abort Register" bitfld.long 0x00 4. " ORUNERRCLR ,STICKYORUN clear" "Not clear,Clear" bitfld.long 0x00 3. " WDERRCLR ,WDATAERR clear" "Not clear,Clear" bitfld.long 0x00 2. " STKERRCLR ,STICKYERR clear" "Not clear,Clear" textline " " bitfld.long 0x00 1. " STKCMPCLR ,STICKYCMP clear" "Not clear,Clear" bitfld.long 0x00 0. " DAPABORT ,DAP abort generate" "Not generate,Generate" group.long 0x04++0xB line.long 0x00 "CTRL_STAT,Control/Status Register" rbitfld.long 0x00 31. " CSYSPWRUPACK ,System power-up acknowledge" "Not acknowledged,Acknowledged" bitfld.long 0x00 30. " CSYSPWRUPREQ ,System power-up request" "Not requested,Requested" rbitfld.long 0x00 29. " CDBGPWRUPACK ,Debug power-up acknowledge" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 28. " CDBGPWRUPREQ ,Debug power-up request" "Not requested,Requested" rbitfld.long 0x00 27. " CDBGRSTACK ,Debug reset acknowledge" "Not acknowledged,Acknowledged" bitfld.long 0x00 26. " CDBGRSTREQ ,Debug reset request" "Not requested,Requested" textline " " hexmask.long.word 0x00 12.--23. 1. " TRNCNT ,Transaction counter" bitfld.long 0x00 8.--11. " MASKLANE ,Mask lane" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rbitfld.long 0x00 7. " WDATAERR ,Write Data Error" "No error,Error" textline " " rbitfld.long 0x00 6. " READOK ,Read ok" "No,Yes" rbitfld.long 0x00 5. " STICKYERR ,Sticky error" "No error,Error" rbitfld.long 0x00 4. " STICKYCMP ,Sticky compare" "Not matched,Matched" textline " " bitfld.long 0x00 2.--3. " TRNMODE ,Transfer mode" "0,1,2,3" rbitfld.long 0x00 1. " STICKYORUN ,Sticky overrun" "No overrun,Overrun" bitfld.long 0x00 0. " ORUNDETECT ,Overrun detect" "Not detected,Detected" line.long 0x04 "SELECT,AP Select Register" hexmask.long.byte 0x04 24.--31. 1. " APSEL ,Current access port select" bitfld.long 0x04 4.--7. " APBANKSEL ,AP Bank select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 0.--3. " DPBANKSEL ,DP Bank select" "CTRL/STAT,DLCR,TARGETID,DLPIDR,?..." line.long 0x08 "RDBUFF,Read Buffer" tree.end width 10. tree "AHB-AP" group.long 0x00++0x7 line.long 0x00 "CSW,Control/Status Word Register" bitfld.long 0x00 30. " SPROT ,Secure transfer request" "Not requested,Requested" bitfld.long 0x00 24.--28. " PROT ,Protection signal encoding" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" rbitfld.long 0x00 23. " SPISTATUS ,SPIDEN port status" "No transfer,Transfer" textline " " bitfld.long 0x00 8.--11. " MODE ,Operation mode" "Normal,?..." rbitfld.long 0x00 7. " TRINPROG ,Transfer in progress" "0,1" rbitfld.long 0x00 6. " DBGSTATUS ,DBGEN port status" "Not permitted,Permitted" textline " " bitfld.long 0x00 4.--5. " ADDRINC ,Auto address increment" "Off,Single,Packed,?..." bitfld.long 0x00 0.--2. " SIZE ,Size of the data access to perform" "8,16,32,?..." line.long 0x04 "TAR,Transfer Address Register" group.long 0x0C++0x13 line.long 0x00 "DRW,Data Read/Write Register" line.long 0x04 "BD0,Banked Data Register 0" line.long 0x08 "BD1,Banked Data Register 1" line.long 0x0C "BD2,Banked Data Register 2" line.long 0x10 "BD3,Banked Data Register 3" rgroup.long 0xF8++0x7 line.long 0x00 "ROM,Debug APB ROM Address" line.long 0x04 "IDR,Identification Register" bitfld.long 0x04 28.--31. " REVISION ," "Reserved,Reserved,Reserved,Reserved,Revision 4,?..." bitfld.long 0x04 24.--27. " JEDEC_B ,JEDEC Bank" "Reserved,Reserved,Reserved,Reserved,ARM,?..." hexmask.long.byte 0x04 17.--23. 1. " JEDEC_C ,JEDEC Code" textline " " bitfld.long 0x04 16. " MEM_AP ,Mem AP" "Reserved,Mem AP" hexmask.long.byte 0x04 0.--7. 1. " ID ,Identity value" tree.end width 10. tree "APB-AP" group.long 0x00++0x7 line.long 0x00 "CSW,Control/Status Word" bitfld.long 0x00 31. " DBGSWENABLE ,Software access enable" "Disabled,Enabled" bitfld.long 0x00 8.--11. " MODE ,Operation mode" "Normal,?..." rbitfld.long 0x00 7. " TRINPROG ,Transfer in progress" "No,Yes" textline " " rbitfld.long 0x00 6. " DEVICEEN ,Device enable" "Disabled,Enabled" bitfld.long 0x00 4.--5. " ADDRINC ,Auto address increment and packing mode" "Disabled,Increment,?..." rbitfld.long 0x00 0.--2. " SIZE ,Size of the access" "Reserved,Reserved,32-bits,?..." line.long 0x04 "TAR,Transfer Address Register" hexmask.long 0x04 2.--31. 0x4 " ADDRESS ,Current transfer address" group.long 0x0C++0x13 line.long 0x00 "DRW,Data Read/Write Register" line.long 0x04 "BD0,Banked Data Register 0" line.long 0x08 "BD1,Banked Data Register 1" line.long 0x0C "BD2,Banked Data Register 2" line.long 0x10 "BD3,Banked Data Register 3" rgroup.long 0xF8++0x7 line.long 0x00 "ROM,Debug APB ROM Address" hexmask.long.tbyte 0x00 12.--31. 0x10 " ROM[31:12] ,ROM Address [31:12]" hexmask.long.word 0x00 0.--11. 1. " ROM[11:0] ,ROM Address [11:0]" line.long 0x04 "IDR,Identification Register" bitfld.long 0x04 28.--31. " REVISION ,REVISION" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 24.--27. " JEDEC_B ,JEDEC Bank" "Reserved,Reserved,Reserved,Reserved,ARM,?..." hexmask.long.byte 0x04 17.--23. 1. " JEDEC_C ,JEDEC Code" textline " " bitfld.long 0x04 16. " MEM_AP ,Mem AP" "Reserved,Standard map" hexmask.long.byte 0x04 0.--7. 1. " ID ,Identity value" tree.end width 13. tree "JTAG-AP" group.long 0x00++0xB line.long 0x00 "CSW,Control/Status Word Register" rbitfld.long 0x00 31. " SERACTV ,JTAG Serializer active" "Not activated,Activated" rbitfld.long 0x00 28.--30. " WFIFOCNT ,Outstanding Write FIFO Byte Count" "0,1,2,3,4,5,6,7" rbitfld.long 0x00 24.--26. " RFIFOCNT ,Outstanding Read FIFO Byte Count" "0,1,2,3,4,5,6,7" textline " " rbitfld.long 0x00 3. " PORTCONNECTED ,PORT Connected" "Not connected,Connected" rbitfld.long 0x00 2. " SRSTCONNECTED ,SRST Connected" "Not connected,Connected" bitfld.long 0x00 1. " TRST_OUT ,TRST Assert" "Not asserted,Asserted" textline " " bitfld.long 0x00 0. " SRST_OUT ,SRST Assert" "Not asserted,Asserted" line.long 0x04 "PORTSEL,Port Select Register" hexmask.long.byte 0x04 0.--7. 1. " PORTSEL ,Port Select" line.long 0x08 "PSTA,Port Status Register" hexmask.long.byte 0x08 0.--7. 1. " PSTA ,Port Status" group.long 0x10++0xF line.long 0x00 "BFIFO0, Byte FIFO register 0" line.long 0x04 "BFIFO1, Byte FIFO register 1" line.long 0x08 "BFIFO2, Byte FIFO register 2" line.long 0x0C "BFIFO3, Byte FIFO register 3" rgroup.long 0xFC++0x3 line.long 0x00 "IDR,Identification Register" bitfld.long 0x00 28.--31. " REVISION ," "Reserved,Reserved,Reserved,Revision 3,?..." bitfld.long 0x00 24.--27. " JEDEC_B ,JEDEC Bank" "Reserved,Reserved,Reserved,Reserved,ARM,?..." hexmask.long.byte 0x00 17.--23. 1. " JEDEC_C ,JEDEC Code" textline " " bitfld.long 0x00 16. " MEM_AP ,Mem AP" "Reserved,Mem AP" hexmask.long.byte 0x00 0.--7. 1. " ID ,Identity value" tree.end tree "ROM table" group.long 0x00++0x3 line.long 0x00 "ROM_ENTRIES,ROM table entries" button "ROM_ENTRIES" "d (0xFF000000)--(0xFF000000+0xEFC) /long" rgroup.long 0xFD0++0x3 line.long 0x00 "PER_ID4,Peripheral ID4" bitfld.long 0x00 4.--7. " COUNT4KB ,4KB count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " JEP106_CC ,JEP106 continuation code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFE0++0x1F line.long 0x00 "PER_ID0,Peripheral ID0" line.long 0x04 "PER_ID1,Peripheral ID1" bitfld.long 0x04 4.--7. " JEP106_IC0TO3 ,JEP106 Identity Code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 0.--3. " PARTNUMBER1 ,Part Number 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "PER_ID2,Peripheral ID2" bitfld.long 0x08 4.--7. " JEP106_IC0TO3 ,JEP106 Identity Code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x08 3. " JEDEC ,JEDEC" "Not used,Used" bitfld.long 0x08 0.--2. " JEP106_IC4TO6 ,JEP106 Identity Code [6:4]" "0,1,2,3,4,5,6,7" line.long 0x0C "PER_ID3,Peripheral ID3" bitfld.long 0x0C 4.--7. " JEP106_IC0TO3 ,JEP106 Identity Code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0C 0.--3. " CUSTMOD ,Customer modified" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x10 "COMP_ID0,Component ID0" line.long 0x14 "COMP_ID1,Component ID1" line.long 0x18 "COMP_ID2,Component ID2" line.long 0x1C "COMP_ID3,Component ID3" tree.end width 0xB tree.end tree "LWHPS2FPGAREGS (LWHPS2FPGA AXI Bridge Module)" base ad:0xFF400000 width 15. tree "ID Register Group" rgroup.long 0x1FD0++0x3 line.long 0x00 "PERIPH_ID_4,Peripheral ID4 Register" hexmask.long.byte 0x00 0.--7. 1. " PERIPH_ID_4 ,Peripheral ID4" rgroup.long 0x1FE0++0xF line.long 0x00 "PERIPH_ID_0,Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PN7TO0 ,Part Number [7:0]" line.long 0x04 "PERIPH_ID_1,Peripheral ID1 Register" hexmask.long.byte 0x04 0.--7. 1. " JEP3TO0_PN11TO8 ,JEP106[3:0] & Part Number [11:8]" line.long 0x08 "PERIPH_ID_2,Peripheral ID2 Register" hexmask.long.byte 0x08 0.--7. 1. " REV_JEPCODE_JEP6TO4 ,Revision & JEP106 code flag & JEP106[6:4]" line.long 0x0C "PERIPH_ID_3,Peripheral ID3 Register" bitfld.long 0x0C 4.--7. " REV_AND ,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0C 0.--3. " CUST_MOD_NUM ,Customer Model Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x1FF0++0xF line.long 0x00 "COMP_ID_0,Component ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PREAMBLE ,Preamble" line.long 0x04 "COMP_ID_1,Component ID1 Register" hexmask.long.byte 0x04 0.--7. 1. " GENIPCOMPCLS_PREAMBLE ,Generic IP component class, Preamble" line.long 0x08 "COMP_ID_2,Component ID2 Register" hexmask.long.byte 0x08 0.--7. 1. " PREAMBLE ,Preamble" line.long 0x0C "COMP_ID_3,Component ID3 Register" hexmask.long.byte 0x0C 0.--7. 1. " PREAMBLE ,Preamble" tree.end tree "Master Register Group" group.long 0x2008++0x3 "FPGA2HPS AXI Bridge Registers" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write transactions mode" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read transactions mode" "Multiple,Single" group.long 0x2044++0x3 line.long 0x00 "AHB_CNTL,AHB Control Register" bitfld.long 0x00 1. " RORCE_INCR ,Force incrementation enable" "Disabled,Enabled" bitfld.long 0x00 0. " DECERR_EN ,DECERR enable" "Disabled,Enabled" group.long 0x3008++0x3 "HPS2FPGA AXI Bridge Registers" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write transactions mode" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read transactions mode" "Multiple,Single" group.long 0x3044++0x3 line.long 0x00 "AHB_CNTL,AHB Control Register" bitfld.long 0x00 1. " RORCE_INCR ,Force incrementation enable" "Disabled,Enabled" bitfld.long 0x00 0. " DECERR_EN ,DECERR enable" "Disabled,Enabled" group.long 0x5008++0x3 "32-bit Master" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write transactions mode" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read transactions mode" "Multiple,Single" group.long 0x5040++0x3 line.long 0x00 "WR_TIDEMARK,Write Tidemark" bitfld.long 0x00 0.--3. " LEVEL ,Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x5108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write transactions mode" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read transactions mode" "Multiple,Single" tree.end tree "Slave Register Group" group.long 0x45108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write transactions mode" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read transactions mode" "Multiple,Single" tree.end width 0xB tree.end tree "HPS2FPGAREGS (HPS2FPGA AXI Bridge Module)" base ad:0xFF500000 width 13. tree "ID Register Group" rgroup.long 0x1FD0++0x3 line.long 0x00 "PERIPH_ID_4,Peripheral ID4 Register" hexmask.long.byte 0x00 0.--7. 1. " PERIPH_ID_4 ,Peripheral ID4" rgroup.long 0x1FE0++0xF line.long 0x00 "PERIPH_ID_0,Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PN7TO0 ,Part Number [7:0]" line.long 0x04 "PERIPH_ID_1,Peripheral ID1 Register" hexmask.long.byte 0x04 0.--7. 1. " JEP3TO0_PN11TO8 ,JEP106[3:0] & Part Number [11:8]" line.long 0x08 "PERIPH_ID_2,Peripheral ID2 Register" hexmask.long.byte 0x08 0.--7. 1. " REV_JEPCODE_JEP6TO4 ,Revision & JEP106 code flag & JEP106[6:4]" line.long 0x0C "PERIPH_ID_3,Peripheral ID3 Register" bitfld.long 0x0C 4.--7. " REV_AND ,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0C 0.--3. " CUST_MOD_NUM ,Customer Model Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x1FF0++0xF line.long 0x00 "COMP_ID_0,Component ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PREAMBLE ,Preamble" line.long 0x04 "COMP_ID_1,Component ID1 Register" hexmask.long.byte 0x04 0.--7. 1. " GENIPCOMPCLS_PREAMBLE ,Generic IP component class, Preamble" line.long 0x08 "COMP_ID_2,Component ID2 Register" hexmask.long.byte 0x08 0.--7. 1. " PREAMBLE ,Preamble" line.long 0x0C "COMP_ID_3,Component ID3 Register" hexmask.long.byte 0x0C 0.--7. 1. " PREAMBLE ,Preamble" tree.end tree "Master Register Group" group.long 0x2024++0x3 "32-bit Master" line.long 0x00 "FN_MOD2,Functionality Modification 2 Register" bitfld.long 0x00 0. " BYPAS_MERGE ,Controls bypass merge of upsizing/downsizing" "Altered,Not altered" group.long 0x2108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write transactions mode" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read transactions mode" "Multiple,Single" group.long 0x4024++0x3 "128-bit Master" line.long 0x00 "FN_MOD2,Functionality Modification 2 Register" bitfld.long 0x00 0. " BYPAS_MERGE ,Controls bypass merge of upsizing/downsizing" "Altered,Not altered" group.long 0x4108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write transactions mode" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read transactions mode" "Multiple,Single" tree.end width 0xB tree.end tree "FPGA2HPSREGS (FPGA2HPS AXI Bridge Module)" base ad:0xFF600000 width 13. tree "ID Register Group" rgroup.long 0x1FD0++0x3 line.long 0x00 "PERIPH_ID_4,Peripheral ID4 Register" hexmask.long.byte 0x00 0.--7. 1. " PERIPH_ID_4 ,Peripheral ID4" rgroup.long 0x1FE0++0xF line.long 0x00 "PERIPH_ID_0,Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PN7TO0 ,Part Number [7:0]" line.long 0x04 "PERIPH_ID_1,Peripheral ID1 Register" hexmask.long.byte 0x04 0.--7. 1. " JEP3TO0_PN11TO8 ,JEP106[3:0] & Part Number [11:8]" line.long 0x08 "PERIPH_ID_2,Peripheral ID2 Register" hexmask.long.byte 0x08 0.--7. 1. " REV_JEPCODE_JEP6TO4 ,Revision & JEP106 code flag & JEP106[6:4]" line.long 0x0C "PERIPH_ID_3,Peripheral ID3 Register" bitfld.long 0x0C 4.--7. " REV_AND ,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0C 0.--3. " CUST_MOD_NUM ,Customer Model Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x1FF0++0xF line.long 0x00 "COMP_ID_0,Component ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PREAMBLE ,Preamble" line.long 0x04 "COMP_ID_1,Component ID1 Register" hexmask.long.byte 0x04 0.--7. 1. " GENIPCOMPCLS_PREAMBLE ,Generic IP component class, Preamble" line.long 0x08 "COMP_ID_2,Component ID2 Register" hexmask.long.byte 0x08 0.--7. 1. " PREAMBLE ,Preamble" line.long 0x0C "COMP_ID_3,Component ID3 Register" hexmask.long.byte 0x0C 0.--7. 1. " PREAMBLE ,Preamble" tree.end tree "Slave Register Group" group.long 0x42024++0x3 "32-bit Slave" line.long 0x00 "FN_MOD2,Functionality Modification 2 Register" bitfld.long 0x00 0. " BYPAS_MERGE ,Controls bypass merge of upsizing/downsizing" "Altered,Not altered" group.long 0x42108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write transactions mode" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read transactions mode" "Multiple,Single" group.long 0x44024++0x3 "128-bit Slave" line.long 0x00 "FN_MOD2,Functionality Modification 2 Register" bitfld.long 0x00 0. " BYPAS_MERGE ,Controls bypass merge of upsizing/downsizing" "Altered,Not altered" group.long 0x44108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write transactions mode" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read transactions mode" "Multiple,Single" tree.end width 0xB tree.end tree.open "EMAC (Ethernet Media Access Controller)" tree "EMAC0" base ad:0xFF700000 width 19. tree "GMAC registers" group.long 0x00++0x07 line.long 0x00 "MAC_CONFIGURATION,MAC Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 30. " SARC[2] ,Source Address Insertion or Replacement Control - MAC address register select" "0,1" bitfld.long 0x00 28.--29. " SARC[1:0] ,Source Address Insertion or Replacement Control" "mti_sa_ctrl_i and ati_sa_ctrl_i,mti_sa_ctrl_i and ati_sa_ctrl_i,Insert MAC address,Replace MAC address" textline " " endif bitfld.long 0x00 27. " TWOKPE ,IEEE 802.3as support for 2K packets Enable" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 26. " SFTERR ,SMII Force Transmit Error" "Not forced,Forced" textline " " endif bitfld.long 0x00 25. " CST ,CRC Stripping of Type Frames" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 24. " TC ,Transmit Configuration in RGMII/SGMII/SMII" "Disabled,Enabled" textline " " else bitfld.long 0x00 24. " TC ,Transmit Configuration in RGMII/SGMII/SMII" "Disabled,Enabled" textline " " endif bitfld.long 0x00 23. " WD ,Watchdog Disable" "No,Yes" textline " " bitfld.long 0x00 22. " JD ,Jabber Disable" "No,Yes" bitfld.long 0x00 21. " BE ,Frame Burst Enable" "Disabled,Enabled" bitfld.long 0x00 20. " JE ,Jumbo Frame Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 17.--19. " IFG ,Inter-Frame Gap" "96bit,88bit,80bit,72bit,64bit,56bit,48bit,40bit" bitfld.long 0x00 16. " DCRS ,Disable Carrier Sense During Transmission" "No,Yes" bitfld.long 0x00 15. " PS ,Port Select" "GMII,MII" textline " " bitfld.long 0x00 14. " FES ,Speed" "10Mbps,100Mbps" bitfld.long 0x00 13. " DO ,Disable Receive Own" "No,Yes" bitfld.long 0x00 12. " LM ,Loopback Mode" "Disabled,Enabled" textline " " bitfld.long 0x00 11. " DM ,Full Duplex Mode" "Disabled,Enabled" bitfld.long 0x00 10. " IPC ,Checksum Offload" "Disabled,Enabled" bitfld.long 0x00 9. " DR ,Disable Retry" "No,Yes" textline " " bitfld.long 0x00 8. " LUD ,Link Up or Down" "Down,Up" bitfld.long 0x00 7. " ACS ,Automatic Pad or CRC Stripping" "Disabled,Enabled" bitfld.long 0x00 5.--6. " BL ,Back-Off Limit" "10,8,4,1" textline " " bitfld.long 0x00 4. " DC ,Deferral Check" "Disabled,Enabled" bitfld.long 0x00 3. " TE ,Transmitter Enable" "Disable,Enable" bitfld.long 0x00 2. " RE ,Receiver Enable" "Disable,Enable" sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--1. " PRELEN ,Preamble Length for Transmit Frames" "7 bytes,5 bytes,3 bytes,1 byte" else textline " " bitfld.long 0x00 0.--1. " PRELEN ,Preamble Length for Transmit Frames" "7 bytes,5 bytes,3 bytes,?..." endif line.long 0x04 "MAC_FRAME_FILTER,MAC Frame Filter" bitfld.long 0x04 31. " RA ,Receive All" "Disabled,Enabled" bitfld.long 0x04 21. " DNTU ,Drop non-TCP/UDP over IP Frames" "Not dropped,Dropped" textline " " bitfld.long 0x04 20. " IPFE ,Layer 3 and Layer 4 Filter Enable" "Disabled,Enabled" bitfld.long 0x04 16. " VTFE ,VLAN Tag Filter Enable" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x04 10. " HPF ,Hash or Perfect Filter" "Disabled,Enabled" textline " " else bitfld.long 0x04 10. " HPF ,Hash or Perfect Filter" "Disabled,Enabled" textline " " endif bitfld.long 0x04 9. " SAF ,Source Address Filter Enable" "Disabled,Enabled" bitfld.long 0x04 8. " SAIF ,SA Inverse Filtering" "Disabled,Enabled" textline " " bitfld.long 0x04 6.--7. " PCF ,Pass Control Frames" "Filters,Forwards w/o PAUSE,Forwards all,Forwards passed" bitfld.long 0x04 5. " DBF ,Disable Broadcast Frames" "No,Yes" textline " " bitfld.long 0x04 4. " PM ,Pass All Multicast" "Disabled,Enabled" bitfld.long 0x04 3. " DAIF ,DA Inverse Filtering" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x04 2. " HMC ,Hash Multicast" "Compare,Hash table" rbitfld.long 0x04 1. " HUC ,Hash Unicast" "Hash table,Compare" textline " " else bitfld.long 0x04 2. " HMC ,Hash Multicast" "Compare,Hash table" bitfld.long 0x04 1. " HUC ,Hash Unicast" "Compare,Hash table" textline " " endif bitfld.long 0x04 0. " PR ,Promiscuous Mode" "Disabled,Enabled" group.long 0x10++0x0F line.long 0x00 "GMII_ADDRESS,GMII Address Register" bitfld.long 0x00 11.--15. " PA ,Physical Layer Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6.--10. " GR ,GMII Register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 2.--5. " CR ,CSR Clock Range" "Div by 42,Div by 62,Div by 16,Div by 26,Div by 102,Div by 124,,,Div by 4,Div by 6,Div by 8,Div by 10,Div by 12,Div by 14,Div by 16,Div by 18" textline " " sif cpu()=="CYCLONEVSOC" bitfld.long 0x00 1. " GW ,GMII Write" "Read,Write" else bitfld.long 0x00 1. " GW ,GMII Write" "Write,Read" endif bitfld.long 0x00 0. " GB ,GMII Busy" "Not busy,Busy" line.long 0x04 "GMII_DATA,GMII Data Register" hexmask.long.word 0x04 0.--15. 1. " GD ,GMII Data" line.long 0x08 "FLOW_CONTROL,Flow Control Register" hexmask.long.word 0x08 16.--31. 1. " PT ,Pause Time" bitfld.long 0x08 7. " DZPQ ,Disable Zero-Quanta Pause" "No,Yes" bitfld.long 0x08 4.--5. " PLT ,Pause Low Threshold" "4 slot,28 slot,144 slot,256 slot" textline " " bitfld.long 0x08 3. " UP ,Unicast Pause Frame Detect" "MCA,MCA & UCA" bitfld.long 0x08 2. " RFE ,Receive Flow Control Enable" "Disabled,Enabled" bitfld.long 0x08 1. " TFE ,Transmit Flow Control Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 0. " FCA_BPA ,Flow Control Busy or Backpressure Activate" "Not activated,Activated" line.long 0x0C "VLAN_TAG,VLAN Tag Register" sif cpu()=="ARRIA10SOC" rbitfld.long 0x0C 19. " VTHM ,VLAN Tag Hash Table Match Enable" "Disabled,Enabled" textline " " else bitfld.long 0x0C 19. " VTHM ,VLAN Tag Hash Table Match Enable" "Disabled,Enabled" textline " " endif bitfld.long 0x0C 18. " ESVL ,Enable S-VLAN" "Disabled,Enabled" bitfld.long 0x0C 17. " VTIM ,VLAN Tag Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x0C 16. " ETV ,Enable 12-Bit VLAN Tag Comparison" "Disabled,Enabled" textline " " bitfld.long 0x0C 13.--15. " VL_UP ,User Priority" "0,1,2,3,4,5,6,7" bitfld.long 0x0C 12. " VL_IND ,Canonical Format Indicator (CFI) or Drop Eligible Indicator (DEI)" "CFI,DEI" hexmask.long.word 0x0C 0.--11. 1. " VID ,VLAN Identifier field" rgroup.long 0x20++0x07 line.long 0x00 "VERSION,Version Register" hexmask.long.byte 0x00 8.--15. 1. " USERVER ,User-defined Version" hexmask.long.byte 0x00 0.--7. 1. " SNPSVER ,Synopsys-defined Version" line.long 0x04 "DEBUG,Debug Register" bitfld.long 0x04 25. " TXSTSFSTS ,MTL TxStatus FIFO Full Status" "Not full,Full" bitfld.long 0x04 24. " TXFSTS ,MTL Tx FIFO Not Empty Status" "Empty,Not empty" bitfld.long 0x04 22. " TWCSTS ,MTL Tx FIFO Write Controller Active Status" "Not activated,Activated" textline " " bitfld.long 0x04 20.--21. " TRCSTS ,Tx FIFO Read Controller Status" "IDLE,READ,Waiting,Writing" bitfld.long 0x04 19. " TXPAUSED ,MAC transmitter in PAUSE" "Disabled,Enabled" bitfld.long 0x04 17.--18. " TFCSTS ,MAC Transmit Frame Controller Status" "IDLE,Waiting,Tx Pause,Tx Input Frame" textline " " bitfld.long 0x04 16. " TPESTS ,MAC GMII or MII Transmit Protocol Engine Status" "Disabled,Enabled" bitfld.long 0x04 8.--9. " RXFSTS ,MTL Rx FIFO Fill-level Status" "Empty,Below threshold,Above threshold,Full" bitfld.long 0x04 5.--6. " RRCSTS ,MTL Rx FIFO Read Controller State" "IDLE,Reading data,Reading status,Flushing" textline " " bitfld.long 0x04 4. " RWCSTS ,MTL Rx FIFO Write Controller Active Status" "Not activated,Activated" bitfld.long 0x04 1.--2. " RFCFCSTS ,MAC Receive Frame Controller FIFO Status" "Disabled,Enabled,?..." bitfld.long 0x04 0. " RPESTS ,MAC GMII or MII Receive Protocol Engine Status" "Idle,Activated" width 29. hgroup.long 0x30++0x03 hide.long 0x00 "LPI_CONTROL_STATUS,LPI Control and Status Register" in group.long 0x34++0x03 line.long 0x00 "LPI_TIMERS_CONTROL,LPI Timers Control Register" hexmask.long.word 0x00 16.--25. 1. " LST ,LPI LS Timer" hexmask.long.word 0x00 0.--15. 1. " TWT ,LPI TW Timer" rgroup.long 0x38++0x03 line.long 0x00 "INTERRUPT_STATUS,Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 11. " GPIIS ,GPI Interrupt Status" "No interrupt,Interrupt" textline " " endif bitfld.long 0x00 10. " LPIIS ,LPI Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " TSIS ,Timestamp Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 7. " MMCRXIPIS ,MMC Receive Checksum Offload Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 6. " MMCTXIS ,MMC Transmit Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 5. " MMCRXIS ,MMC Receive Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 4. " MMCIS ,MMC Interrupt Status" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 3. " PMTIS ,PMT Interrupt Status" "No interrupt,Interrupt" textline " " endif bitfld.long 0x00 2. " PCSANCIS ,PCS Auto-Negotiation Complete" "No interrupt,Interrupt" bitfld.long 0x00 1. " PCSLCHGIS ,PCS Link Status Changed" "No interrupt,Interrupt" bitfld.long 0x00 0. " RGSMIIIS ,RGMII or SMII Interrupt Status" "No interrupt,Interrupt" group.long 0x3C++0x03 line.long 0x00 "INTERRUPT_MASK,Interrupt Mask Register" bitfld.long 0x00 10. " LPIIM ,LPI Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 9. " TSIM ,Timestamp Interrupt Mask" "Not masked,Masked" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 3. " PMTIM ,PMT Interrupt Mask" "Not masked,Masked" textline " " endif bitfld.long 0x00 2. " PCSANCIM ,PCS AN Completion Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 1. " PCSLCHGIM ,PCS Link Status Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 0. " RGSMIIIM ,RGSMIIIM" "Not masked,Masked" width 20. tree "MAC Address 0 - 15 Registers" group.long 0x40++0x07F line.long 0x00 "MAC_ADDRESS0_HIGH,MAC Address0 High Register" rbitfld.long 0x00 31. " AE ,Address Enable" ",Enabled" hexmask.long.word 0x00 0.--15. 1. " ADDRHI ,MAC Address 0" line.long 0x04 "MAC_ADDRESS0_LOW,MAC Address$2 Low Register" line.long 0x8 "MAC_ADDRESS1_HIGH,MAC Address1 High Register" bitfld.long 0x8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x8 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x8 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x8 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x8 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x8 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x8 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x8 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x8 0.--15. 1. " ADDRHI ,MAC Address1" line.long (0x8+0x04) "MAC_ADDRESS1_LOW,MAC Address1 Low Register" line.long 0x10 "MAC_ADDRESS2_HIGH,MAC Address2 High Register" bitfld.long 0x10 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x10 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x10 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x10 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x10 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x10 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x10 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x10 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x10 0.--15. 1. " ADDRHI ,MAC Address2" line.long (0x10+0x04) "MAC_ADDRESS2_LOW,MAC Address2 Low Register" line.long 0x18 "MAC_ADDRESS3_HIGH,MAC Address3 High Register" bitfld.long 0x18 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x18 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x18 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x18 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x18 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x18 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x18 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x18 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x18 0.--15. 1. " ADDRHI ,MAC Address3" line.long (0x18+0x04) "MAC_ADDRESS3_LOW,MAC Address3 Low Register" line.long 0x20 "MAC_ADDRESS4_HIGH,MAC Address4 High Register" bitfld.long 0x20 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x20 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x20 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x20 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x20 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x20 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x20 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x20 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x20 0.--15. 1. " ADDRHI ,MAC Address4" line.long (0x20+0x04) "MAC_ADDRESS4_LOW,MAC Address4 Low Register" line.long 0x28 "MAC_ADDRESS5_HIGH,MAC Address5 High Register" bitfld.long 0x28 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x28 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x28 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x28 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x28 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x28 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x28 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x28 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x28 0.--15. 1. " ADDRHI ,MAC Address5" line.long (0x28+0x04) "MAC_ADDRESS5_LOW,MAC Address5 Low Register" line.long 0x30 "MAC_ADDRESS6_HIGH,MAC Address6 High Register" bitfld.long 0x30 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x30 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x30 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x30 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x30 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x30 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x30 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x30 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x30 0.--15. 1. " ADDRHI ,MAC Address6" line.long (0x30+0x04) "MAC_ADDRESS6_LOW,MAC Address6 Low Register" line.long 0x38 "MAC_ADDRESS7_HIGH,MAC Address7 High Register" bitfld.long 0x38 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x38 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x38 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x38 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x38 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x38 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x38 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x38 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x38 0.--15. 1. " ADDRHI ,MAC Address7" line.long (0x38+0x04) "MAC_ADDRESS7_LOW,MAC Address7 Low Register" line.long 0x40 "MAC_ADDRESS8_HIGH,MAC Address8 High Register" bitfld.long 0x40 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x40 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x40 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x40 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x40 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x40 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x40 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x40 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x40 0.--15. 1. " ADDRHI ,MAC Address8" line.long (0x40+0x04) "MAC_ADDRESS8_LOW,MAC Address8 Low Register" line.long 0x48 "MAC_ADDRESS9_HIGH,MAC Address9 High Register" bitfld.long 0x48 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x48 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x48 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x48 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x48 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x48 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x48 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x48 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x48 0.--15. 1. " ADDRHI ,MAC Address9" line.long (0x48+0x04) "MAC_ADDRESS9_LOW,MAC Address9 Low Register" line.long 0x50 "MAC_ADDRESS10_HIGH,MAC Address10 High Register" bitfld.long 0x50 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x50 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x50 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x50 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x50 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x50 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x50 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x50 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x50 0.--15. 1. " ADDRHI ,MAC Address10" line.long (0x50+0x04) "MAC_ADDRESS10_LOW,MAC Address10 Low Register" line.long 0x58 "MAC_ADDRESS11_HIGH,MAC Address11 High Register" bitfld.long 0x58 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x58 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x58 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x58 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x58 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x58 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x58 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x58 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x58 0.--15. 1. " ADDRHI ,MAC Address11" line.long (0x58+0x04) "MAC_ADDRESS11_LOW,MAC Address11 Low Register" line.long 0x60 "MAC_ADDRESS12_HIGH,MAC Address12 High Register" bitfld.long 0x60 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x60 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x60 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x60 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x60 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x60 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x60 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x60 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x60 0.--15. 1. " ADDRHI ,MAC Address12" line.long (0x60+0x04) "MAC_ADDRESS12_LOW,MAC Address12 Low Register" line.long 0x68 "MAC_ADDRESS13_HIGH,MAC Address13 High Register" bitfld.long 0x68 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x68 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x68 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x68 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x68 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x68 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x68 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x68 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x68 0.--15. 1. " ADDRHI ,MAC Address13" line.long (0x68+0x04) "MAC_ADDRESS13_LOW,MAC Address13 Low Register" line.long 0x70 "MAC_ADDRESS14_HIGH,MAC Address14 High Register" bitfld.long 0x70 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x70 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x70 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x70 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x70 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x70 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x70 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x70 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x70 0.--15. 1. " ADDRHI ,MAC Address14" line.long (0x70+0x04) "MAC_ADDRESS14_LOW,MAC Address14 Low Register" line.long 0x78 "MAC_ADDRESS15_HIGH,MAC Address15 High Register" bitfld.long 0x78 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x78 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x78 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x78 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x78 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x78 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x78 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x78 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x78 0.--15. 1. " ADDRHI ,MAC Address15" line.long (0x78+0x04) "MAC_ADDRESS15_LOW,MAC Address15 Low Register" tree.end width 23. rgroup.long 0xD8++0x03 line.long 0x00 "SGMII_CONTROL_STATUS,SMII Status Register" bitfld.long 0x00 3. " LNKSTS ,Link Status" "Down,Up" bitfld.long 0x00 1.--2. " LNKSPEED ,Link Speed" "2.5MHz,25MHz,125MHz,?..." bitfld.long 0x00 0. " LNKMOD ,Link Mode" "Half-duplex,Full-duplex" sif cpu()=="ARRIA10SOC" group.long 0xDC++0x03 line.long 0x00 "WDOG_TIMEOUT,Watchdog Timeout Register" bitfld.long 0x00 16. " PWE ,Programmable Watchdog Enable" "Disabled,Enabled" hexmask.long.word 0x00 0.--13. 1. " WTO ,Watchdog Timeout" group.long 0xE0++0x03 line.long 0x00 "GENPIO,General Purpose I/O Register" bitfld.long 0x00 24. " GPIT ,GPI Type" "Latched-high,Latched-low" bitfld.long 0x00 16. " GPIE ,GPI Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 8. " GPO ,General Purpose Output" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " GPIS ,General Purpose Input Status" "Low,High" endif group.long 0x100++0x03 line.long 0x00 "MMC_CONTROL,MMC Control Register" bitfld.long 0x00 8. " UCDBC ,Update MMC Counters for Dropped Broadcast Frames" "Disabled,Enabled" bitfld.long 0x00 5. " CNTPRSTLVL ,Full-Half Preset" "Half,Full" bitfld.long 0x00 4. " CNTPRST ,Counters Preset" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " CNTFREEZ ,MMC Counter Freeze" "Disabled,Enabled" bitfld.long 0x00 2. " RSTONRD ,Reset on Read" "Disabled,Enabled" bitfld.long 0x00 1. " CNTSTOPRO ,Counters Stop Rollover" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " CNTRST ,Counters Reset" "Disabled,Enabled" rgroup.long 0x104++0x07 line.long 0x00 "MMC_RECEIVE_INTERRUPT,MMC Receive Interrupt Register" bitfld.long 0x00 25. " RXCTRLFIS ,MMC Receive Control Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 24. " RXRCVERRFIS ,MMC Receive Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 23. " RXWDOGFIS ,MMC Receive Watchdog Error Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 22. " RXVLANGBFIS ,MMC Receive VLAN Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 21. " RXFOVFIS ,MMC Receive FIFO Overflow Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 20. " RXPAUSFIS ,MMC Receive Pause Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 19. " RXORANGEFIS ,MMC Receive Out Of Range Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 18. " RXLENERFIS ,MMC Receive Length Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 17. " RXUCGFIS ,MMC Receive Unicast Good Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 16. " RX1024TMAXOCTGBFIS ,MMC Receive 1024 to Maximum Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 15. " RX512T1023OCTGBFIS ,MMC Receive 512 to 1023 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 14. " RX256T511OCTGBFIS ,MMC Receive 256 to 511 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 13. " RX128T255OCTGBFIS ,MMC Receive 128 to 255 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 12. " RX65T127OCTGBFIS ,MMC Receive 65 to 127 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 11. " RX64OCTGBFIS ,MMC Receive 64 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 10. " RXOSIZEGFIS ,MMC Receive Oversize Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 9. " RXUSIZEGFIS ,MMC Receive Undersize Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 8. " RXJABERFIS ,MMC Receive Jabber Error Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 7. " RXRUNTFIS ,MMC Receive Runt Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 6. " RXALGNERFIS ,MMC Receive Alignment Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 5. " RXCRCERFIS ,MMC Receive CRC Error Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 4. " RXMCGFIS ,MMC Receive Multicast Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 3. " RXBCGFIS ,MMC Receive Broadcast Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 2. " RXGOCTIS ,MMC Receive Good Octet Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 1. " RXGBOCTIS ,MMC Receive Good Bad Octet Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 0. " RXGBFRMIS ,MMC Receive Good Bad Frame Counter Interrupt Status" "Almost half,Almost full" line.long 0x04 "MMC_TRANSMIT_INTERRUPT,RMMC Transmit Interrupt Register" bitfld.long 0x04 25. " TXOSIZEGFIS ,MMC Transmit Oversize Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 24. " TXVLANGFIS ,MMC Transmit VLAN Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 23. " TXPAUSFIS ,MMC Transmit Pause Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 22. " TXEXDEFFIS ,MMC Transmit Excessive Deferral Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 21. " TXGFRMIS ,MMC Transmit Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 20. " TXGOCTIS ,MMC Transmit Good Octet Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 19. " TXCARERFIS ,MMC Transmit Carrier Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 18. " TXEXCOLFIS ,MMC Transmit Excessive Collision Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 17. " TXLATCOLFIS ,MMC Transmit Late Collision Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 16. " TXDEFFIS ,MMC Transmit Deferred Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 15. " TXMCOLGFIS ,MMC Transmit Multiple Collision Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 14. " TXSCOLGFIS ,MMC Transmit Single Collision Good Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 13. " TXUFLOWERFIS ,MMC Transmit Underflow Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 12. " TXBCGBFIS ,MMC Transmit Broadcast Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 11. " TXMCGBFIS ,MMC Transmit Multicast Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 10. " TXUCGBFIS ,MMC Transmit Unicast Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 9. " TX1024TMAXOCTGBFIS ,MMC Transmit 1024 to Maximum Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 8. " TX512T1023OCTGBFIS ,MMC Transmit 512 to 1023 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 7. " TX256T511OCTGBFIS ,MMC Transmit 256 to 511 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 6. " TX128T255OCTGBFIS ,MMC Transmit 128 to 255 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 5. " TX65T127OCTGBFIS ,MMC Transmit 65 to 127 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 4. " TX64OCTGBFIS ,MMC Transmit 64 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 3. " TXMCGFIS ,MMC Transmit Multicast Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 2. " TXBCGFIS ,MMC Transmit Broadcast Good Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 1. " TXGBFRMIS ,MMC Transmit Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 0. " TXGBOCTIS ,MMC Transmit Good Bad Octet Counter Interrupt Status" "< half max,>= half max" width 36. group.long 0x10C++0x07 line.long 0x00 "MMC_RECEIVE_INTERRUPT_MASK,MMC Receive Interrupt Mask Register" bitfld.long 0x00 25. " RXCTRLFIM ,MMC Receive Control Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 24. " RXRCVERRFIM ,MMC Receive Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 23. " RXWDOGFIM ,MMC Receive Watchdog Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 22. " RXVLANGBFIM ,MMC Receive VLAN Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 21. " RXFOVFIM ,MMC Receive FIFO Overflow Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 20. " RXPAUSFIM ,MMC Receive Pause Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 19. " RXORANGEFIM ,MMC Receive Out Of Range Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 18. " RXLENERFIM ,MMC Receive Length Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 17. " RXUCGFIM ,MMC Receive Unicast Good Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 16. " RX1024TMAXOCTGBFIM ,MMC Receive 1024 to Maximum Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 15. " RX512T1023OCTGBFIM ,MMC Receive 512 to 1023 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 14. " RX256T511OCTGBFIM ,MMC Receive 256 to 511 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 13. " RX128T255OCTGBFIM ,MMC Receive 128 to 255 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 12. " RX65T127OCTGBFIM ,MMC Receive 65 to 127 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 11. " RX64OCTGBFIM ,MMC Receive 64 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 10. " RXOSIZEGFIM ,MMC Receive Oversize Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 9. " RXUSIZEGFIM ,MMC Receive Undersize Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 8. " RXJABERFIM ,MMC Receive Jabber Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 7. " RXRUNTFIM ,MMC Receive Runt Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 6. " RXALGNERFIM ,MMC Receive Alignment Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 5. " RXCRCERFIM ,MMC Receive CRC Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 4. " RXMCGFIM ,MMC Receive Multicast Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 3. " RXBCGFIM ,MMC Receive Broadcast Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 2. " RXGOCTIM ,MMC Receive Good Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 1. " RXGBOCTIM ,MMC Receive Good Bad Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 0. " RXGBFRMIM ,MMC Receive Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" line.long 0x04 "MMC_TRANSMIT_INTERRUPT_MASK,MMC Transmit Interrupt Mask Register" bitfld.long 0x04 25. " TXOSIZEGFIM ,MMC Transmit Oversize Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 24. " TXVLANGFIM ,MMC Transmit VLAN Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 23. " TXPAUSFIM ,MMC Transmit Pause Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 22. " TXEXDEFFIM ,MMC Transmit Excessive Deferral Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 21. " TXGFRMIM ,MMC Transmit Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 20. " TXGOCTIM ,MMC Transmit Good Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 19. " TXCARERFIM ,MMC Transmit Carrier Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 18. " TXEXCOLFIM ,MMC Transmit Excessive Collision Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 17. " TXLATCOLFIM ,MMC Transmit Late Collision Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 16. " TXDEFFIM ,MMC Transmit Deferred Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 15. " TXMCOLGFIM ,MMC Transmit Multiple Collision Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 14. " TXSCOLGFIM ,MMC Transmit Single Collision Good Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 13. " TXUFLOWERFIM ,MMC Transmit Underflow Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 12. " TXBCGBFIM ,MMC Transmit Broadcast Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 11. " TXMCGBFIM ,MMC Transmit Multicast Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 10. " TXUCGBFIM ,MMC Transmit Unicast Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 9. " TX1024TMAXOCTGBFIM ,MMC Transmit 1024 to Maximum Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 8. " TX512T1023OCTGBFIM ,MMC Transmit 512 to 1023 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 7. " TX256T511OCTGBFIM ,MMC Transmit 256 to 511 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 6. " TX128T255OCTGBFIM ,MMC Transmit 128 to 255 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 5. " TX65T127OCTGBFIM ,MMC Transmit 65 to 127 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 4. " TX64OCTGBFIM ,MMC Transmit 64 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 3. " TXMCGFIM ,MMC Transmit Multicast Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 2. " TXBCGFIM ,MMC Transmit Broadcast Good Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 1. " TXGBFRMIM ,MMC Transmit Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 0. " TXGBOCTIM ,MMC Transmit Good Bad Octet Counter Interrupt Mask" "Not masked,Masked" rgroup.long 0x114++0x67 line.long 0x00 "TX_OCTET_COUNT_GOOD_BAD,Transmit Octet Count for Good and Bad Frames" line.long 0x04 "TX_FRAME_COUNT_GOOD_BAD,Transmit Frame Count for Good and Bad Frames" line.long 0x08 "TX_BROADCAST_FRAMES_GOOD,Transmit Frame Count for Good Broadcast Frames" line.long 0x0C "TX_MULTICAST_FRAMES_GOOD,Transmit Frame Count for Good Multicast Frames" line.long 0x10 "TX_64OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 64 Byte Frames" line.long 0x14 "TX_65TO127OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 65 to 127 Bytes Frames" line.long 0x18 "TX_128TO255OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 128 to 255 Bytes Frames" line.long 0x1C "TX_256TO511OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 256 to 511 Bytes Frames" line.long 0x20 "TX_512TO1023OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 512 to 1023 Bytes Frames" line.long 0x24 "TX_1024TOMAXOCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 1024 to Maxsize Bytes Frames" line.long 0x28 "TX_UNICAST_FRAMES_GOOD_BAD,Transmit Frame Count for Good and Bad Unicast Frames" line.long 0x2C "TX_MULTICAST_FRAMES_GOOD_BAD,Transmit Frame Count for Good and Bad Multicast Frames" line.long 0x30 "TX_BROADCAST_FRAMES_GOOD_BAD,Transmit Frame Count for Good and Bad Broadcast Frames" line.long 0x34 "TX_UNDERFLOW_ERROR_FRAMES,Transmit Frame Count for Underflow Error Frames" line.long 0x38 "TX_SINGLE_COLLISION_GOOD_FRAMES,Transmit Frame Count for Frames Transmitted after Single Collision" line.long 0x3C "TX_MULTIPLE_COLLISION_GOOD_FRAMES,Transmit Frame Count for Frames Transmitted after Multiple Collision" line.long 0x40 "TX_DEFERRED_FRAMES,Transmit Frame Count for Deferred Frames" line.long 0x44 "TX_LATE_COLLISION_FRAMES,Transmit Frame Count for Late Collision Error Frames" line.long 0x48 "TX_EXCESSIVE_COLLISION_FRAMES,Transmit Frame Count for Excessive Collision Error Frames" line.long 0x4C "TX_CARRIER_ERROR_FRAMES,Transmit Frame Count for Carrier Sense Error Frames" line.long 0x50 "TX_OCTET_COUNT_GOOD,Transmit Octet Count for Good Frames" line.long 0x54 "TX_FRAME_COUNT_GOOD,Transmit Frame Count for Good Frames" line.long 0x58 "TX_EXCESSIVE_DEFERRAL_ERROR,Transmit Frame Count for Excessive Deferral Error Frames" line.long 0x5C "TX_PAUSE_FRAMES,Transmit Frame Count for Good PAUSE Frames" line.long 0x60 "TX_VLAN_FRAMES_GOOD,Transmit Frame Count for Good VLAN Frames" line.long 0x64 "TX_OVERSIZE_G,Number of good and bad frames received" rgroup.long 0x180++0x67 line.long 0x00 "RX_FRAMES_COUNT_GOOD_BAD,Receive Frame Count for Good and Bad Frames" line.long 0x04 "RX_OCTET_COUNT_GOOD_BAD,Receive Octet Count for Good and Bad Frames" line.long 0x08 "RX_OCTET_COUNT_GOOD,Receive Octet Count for Good Frames" line.long 0x0C "RX_BROADCAST_FRAMES_GOOD,Receive Frame Count for Good Broadcast Frames" line.long 0x10 "RX_MULTICAST_FRAMES_GOOD,Receive Frame Count for Good Multicast Frames" line.long 0x14 "RX_CRC_ERROR_FRAMES,Receive Frame Count for CRC Error Frames" line.long 0x18 "RX_ALIGNMENT_ERROR_FRAMES,Receive Frame Count for Alignment Error Frames" line.long 0x1C "RX_RUNT_ERROR_FRAMES,Receive Frame Count for Runt Error Frames" line.long 0x20 "RX_JABBER_ERROR_FRAMES,Receive Frame Count for Jabber Error Frames" line.long 0x24 "RX_UNDERSIZE_FRAMES_GOOD,Receive Frame Count for Undersize Frames" line.long 0x28 "RX_OVERSIZE_FRAMES_GOOD,Receive Frame Count for Oversize Frames" line.long 0x2C "RX_64OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 64 Byte Frames" line.long 0x30 "RX_65TO127OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 65 to 127 Bytes Frames" line.long 0x34 "RX_128TO255OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 128 to 255 Bytes Frames" line.long 0x38 "RX_256TO511OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 256 to 511 Bytes Frames" line.long 0x3C "RX_512TO1023OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 512 to 1,023 Bytes Frames" line.long 0x40 "RX_1024TOMAXOCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 1,024 to Maxsize Bytes Frames" line.long 0x44 "RX_UNICAST_FRAMES_GOOD,Receive Frame Count for Good Unicast Frames" line.long 0x48 "RX_LENGTH_ERROR_FRAMES,Receive Frame Count for Length Error Frames" line.long 0x4C "RX_OUT_OF_RANGE_TYPE_FRAMES,Receive Frame Count for Out of Range Frames" line.long 0x50 "RX_PAUSE_FRAMES,Receive Frame Count for PAUSE Frames" line.long 0x54 "RX_FIFO_OVERFLOW_FRAMES,Receive Frame Count for FIFO Overflow Frames" line.long 0x58 "RX_VLAN_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad VLAN Frames" line.long 0x5C "RX_WATCHDOG_ERROR_FRAMES,Receive Frame Count for Watchdog Error Frames" line.long 0x60 "RX_RECEIVE_ERROR_FRAMES,Receive Frame Count for Receive Error Frames" line.long 0x64 "RX_CTRLF_RAMES_G,Number of received good control frames" group.long 0x200++0x03 line.long 0x00 "MMC_IPC_RECEIVE_INTERRUPT_MASK,MMC Receive Checksum Offload Interrupt Mask Register" bitfld.long 0x00 29. " RXICMPEROIM ,MMC Receive ICMP Error Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 28. " RXICMPGOIM ,MMC Receive ICMP Good Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 27. " RXTCPEROIM ,MMC Receive TCP Error Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 26. " RXTCPGOIM ,MMC Receive TCP Good Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 25. " RXUDPEROIM ,MMC Receive UDP Error Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 24. " RXUDPGOIM ,MMC Receive UDP Good Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 23. " RXIPV6NOPAYOIM ,MMC Receive IPV6 No Payload Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 22. " RXIPV6HEROIM ,MMC Receive IPV6 Header Error Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 21. " RXIPV6GOIM ,MMC Receive IPV6 Good Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 20. " RXIPV4UDSBLOIM ,MMC Receive IPV4 UDP Checksum Disabled Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 19. " RXIPV4FRAGOIM ,MMC Receive IPV4 Fragmented Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 18. " RXIPV4NOPAYOIM ,MMC Receive IPV4 No Payload Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 17. " RXIPV4HEROIM ,MMC Receive IPV4 Header Error Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 16. " RXIPV4GOIM ,MMC Receive IPV4 Good Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 13. " RXICMPERFIM ,MMC Receive ICMP Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 12. " RXICMPGFIM ,MMC Receive ICMP Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 11. " RXTCPERFIM ,MMC Receive TCP Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 10. " RXTCPGFIM ,MMC Receive TCP Good Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 9. " RXUDPERFIM ,MMC Receive UDP Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 8. " RXUDPGFIM ,MMC Receive UDP Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 7. " RXIPV6NOPAYFIM ,MMC Receive IPV6 No Payload Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 6. " RXIPV6HERFIM ,MMC Receive IPV6 Header Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 5. " RXIPV6GFIM ,MMC Receive IPV6 Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 4. " RXIPV4UDSBLFIM ,MMC Receive IPV4 UDP Checksum Disabled Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 3. " RXIPV4FRAGFIM ,MMC Receive IPV4 Fragmented Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 2. " RXIPV4NOPAYFIM ,MMC Receive IPV4 No Payload Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 1. " RXIPV4HERFIM ,MMC Receive IPV4 Header Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 0. " RXIPV4GFIM ,MMC Receive IPV4 Good Frame Counter Interrupt Mask" "Not masked,Masked" rgroup.long 0x208++0x03 line.long 0x00 "MMC_IPC_RECEIVE_INTERRUPT,MMC Receive Checksum Offload Interrupt Register" bitfld.long 0x00 29. " RXICMPEROIS ,MMC Receive ICMP Error Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 28. " RXICMPGOIS ,MMC Receive ICMP Good Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 27. " RXTCPEROIS ,MMC Receive TCP Error Octet Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 26. " RXTCPGOIS ,MMC Receive TCP Good Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 25. " RXUDPEROIS ,MMC Receive UDP Error Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 24. " RXUDPGOIS ,MMC Receive UDP Good Octet Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 23. " RXIPV6NOPAYOIS ,MMC Receive IPV6 No Payload Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 22. " RXIPV6HEROIS ,MMC Receive IPV6 Header Error Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 21. " RXIPV6GOIS ,MMC Receive IPV6 Good Octet Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 20. " RXIPV4UDSBLOIS ,MMC Receive IPV4 UDP Checksum Disabled Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 19. " RXIPV4FRAGOIS ,MMC Receive IPV4 Fragmented Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 18. " RXIPV4NOPAYOIS ,MMC Receive IPV4 No Payload Octet Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 17. " RXIPV4HEROIS ,MMC Receive IPV4 Header Error Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 16. " RXIPV4GOIS ,MMC Receive IPV4 Good Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 13. " RXICMPERFIS ,MMC Receive ICMP Error Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 12. " RXICMPGFIS ,MMC Receive ICMP Good Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 11. " RXTCPERFIS ,MMC Receive TCP Error Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 10. " RXTCPGFIS ,MMC Receive TCP Good Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " RXUDPERFIS ,MMC Receive UDP Error Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " RXUDPGFIS ,MMC Receive UDP Good Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 7. " RXIPV6NOPAYFIS ,MMC Receive IPV6 No Payload Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 6. " RXIPV6HERFIS ,MMC Receive IPV6 Header Error Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 5. " RXIPV6GFIS ,MMC Receive IPV6 Good Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 4. " RXIPV4UDSBLFIS ,MMC Receive IPV4 UDP Checksum Disabled Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " RXIPV4FRAGFIS ,MMC Receive IPV4 Fragmented Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 2. " RXIPV4NOPAYFIS ,MMC Receive IPV4 No Payload Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 1. " RXIPV4HERFIS ,MMC Receive IPV4 Header Error Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 0. " RXIPV4GFIS ,MMC Receive IPV4 Good Frame Counter Interrupt Status" "No interrupt,Interrupt" rgroup.long 0x210++0x037 line.long 0x00 "RXIPV4_GOOD_FRAMES,Receive IPV4 Good Frame Counter Register" line.long 0x04 "RXIPV4_HEADER_ERROR_FRAMES,Receive IPV4 Header Error Frame Counter Register" line.long 0x08 "RXIPV4_NO_PAYLOAD_FRAMES,Receive IPV4 No Payload Frame Counter Register" line.long 0x0C "RXIPV4_FRAGMENTED_FRAMES,Receive IPV4 Fragmented Frame Counter Register" line.long 0x10 "RXIPV4_UDP_CHECKSUM_DISABLED_FRAMES,Receive IPV4 UDP Checksum Disabled Frame Counter Register" line.long 0x14 "RXIPV6_GOOD_FRAMES,Receive IPV6 Good Frame Counter Register" line.long 0x18 "RXIPV6_HEADER_ERROR_FRAMES,Receive IPV6 Header Error Frame Counter Register" line.long 0x1C "RXIPV6_NO_PAYLOAD_FRAMES,Receive IPV6 No Payload Frame Counter Register" line.long 0x20 "RXUDP_GOOD_FRAMES,Receive UDP Good Frame Counter Register" line.long 0x24 "RXUDP_ERROR_FRAMES,Receive UDP Error Frame Counter Register" line.long 0x28 "RXTCP_GOOD_FRAMES,Receive TCP Good Frame Counter Register" line.long 0x2C "RXTCP_ERROR_FRAMES,Receive TCP Error Frame Counter Register" line.long 0x30 "RXICMP_GOOD_FRAMES,Receive ICMP Good Frame Counter Register" line.long 0x34 "RXICMP_ERROR_FRAMES,Receive ICMP Error Frame Counter Register" rgroup.long 0x250++0x037 line.long 0x00 "RXIPV4_GOOD_OCTETS,Receive IPV4 Good Octet Counter Register" line.long 0x04 "RXIPV4_HEADER_ERROR_OCTETS,Receive IPV4 Header Error Octet Counter Register" line.long 0x08 "RXIPV4_NO_PAYLOAD_OCTETS,Receive IPV4 No Payload Octet Counter Register" line.long 0x0C "RXIPV4_FRAGMENTED_OCTETS,Receive IPV4 Fragmented Octet Counter Register" line.long 0x10 "RXIPV4_UDP_CHECKSUM_DISABLE_OCTETS,Receive IPV4 Fragmented Octet Counter Register" line.long 0x14 "RXIPV6_GOOD_OCTETS,Receive IPV6 Good Octet Counter Register" line.long 0x18 "RXIPV6_HEADER_ERROR_OCTETS,Receive IPV6 Header Error Octet Counter Register" line.long 0x1C "RXIPV6_NO_PAYLOAD_OCTETS,Receive IPV6 No Payload Octet Counter Register" line.long 0x20 "RXUDP_GOOD_OCTETS,Receive UDP Good Octet Counter Register" line.long 0x24 "RXUDP_ERROR_OCTETS,Receive UDP Error Octet Counter Register" line.long 0x28 "RXTCP_GOOD_OCTETS,Receive TCP Good Octet Counter Register" line.long 0x2C "RXTCP_ERROR_OCTETS,Receive TCP Error Octet Counter Register" line.long 0x30 "RXICMP_GOOD_OCTETS,Receive ICMP Good Octet Counter Register" line.long 0x34 "RXICMP_ERROR_OCTETS,Receive ICMP Error Octet Counter Register" group.long 0x400++0x07 line.long 0x00 "L3_L4_CONTROL0,Layer 3 and Layer 4 Control Register 0" bitfld.long 0x00 21. " L4DPIM0 ,Layer 4 Destination Port Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 20. " L4DPM0 ,Layer 4 Destination Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 19. " L4SPIM0 ,Layer 4 Source Port Inverse Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " L4SPM0 ,Layer 4 Source Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 16. " L4PEN0 ,Layer 4 Protocol Enable" "Disabled,Enabled" bitfld.long 0x00 11.--15. " L3HDBM0 ,Layer 3 IP DA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 6.--10. " L3HSBM0 ,Layer 3 IP SA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM0 , Layer 3 IP DA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 4. " L3DAM0 ,Layer 3 IP DA Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " L3SAIM0 , Layer 3 IP SA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 2. " L3SAM0 ,Layer 3 IP SA Match Enable" "Disabled,Enabled" bitfld.long 0x00 0. " L3PEN0 , Layer 3 Protocol Enable" "Disabled,Enabled" line.long 0x04 "LAYER4_ADDRESS0,Layer 4 Address Register0" hexmask.long.word 0x04 16.--31. 1. " L4DP0 ,Layer 4 Destination Port Number Field" hexmask.long.word 0x04 0.--15. 1. " L4SP0 ,Layer 4 Source Port Number Field" group.long (0x400+0x10)++0x0F line.long 0x00 "LAYER3_ADDR0_REG0,Layer 3 Address 0 Register 0" line.long 0x04 "LAYER3_ADDR1_REG0,Layer 3 Address 1 Register 0" line.long 0x08 "LAYER3_ADDR2_REG0,Layer 3 Address 2 Register 0" line.long 0x0C "LAYER3_ADDR3_REG0,Layer 3 Address 3 Register 0" group.long 0x430++0x07 line.long 0x00 "L3_L4_CONTROL1,Layer 3 and Layer 4 Control Register 1" bitfld.long 0x00 21. " L4DPIM1 ,Layer 4 Destination Port Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 20. " L4DPM1 ,Layer 4 Destination Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 19. " L4SPIM1 ,Layer 4 Source Port Inverse Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " L4SPM1 ,Layer 4 Source Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 16. " L4PEN1 ,Layer 4 Protocol Enable" "Disabled,Enabled" bitfld.long 0x00 11.--15. " L3HDBM1 ,Layer 3 IP DA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 6.--10. " L3HSBM1 ,Layer 3 IP SA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM1 , Layer 3 IP DA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 4. " L3DAM1 ,Layer 3 IP DA Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " L3SAIM1 , Layer 3 IP SA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 2. " L3SAM1 ,Layer 3 IP SA Match Enable" "Disabled,Enabled" bitfld.long 0x00 0. " L3PEN1 , Layer 3 Protocol Enable" "Disabled,Enabled" line.long 0x04 "LAYER4_ADDRESS1,Layer 4 Address Register1" hexmask.long.word 0x04 16.--31. 1. " L4DP1 ,Layer 4 Destination Port Number Field" hexmask.long.word 0x04 0.--15. 1. " L4SP1 ,Layer 4 Source Port Number Field" group.long (0x430+0x10)++0x0F line.long 0x00 "LAYER3_ADDR0_REG1,Layer 3 Address 0 Register 1" line.long 0x04 "LAYER3_ADDR1_REG1,Layer 3 Address 1 Register 1" line.long 0x08 "LAYER3_ADDR2_REG1,Layer 3 Address 2 Register 1" line.long 0x0C "LAYER3_ADDR3_REG1,Layer 3 Address 3 Register 1" group.long 0x460++0x07 line.long 0x00 "L3_L4_CONTROL2,Layer 3 and Layer 4 Control Register 2" bitfld.long 0x00 21. " L4DPIM2 ,Layer 4 Destination Port Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 20. " L4DPM2 ,Layer 4 Destination Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 19. " L4SPIM2 ,Layer 4 Source Port Inverse Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " L4SPM2 ,Layer 4 Source Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 16. " L4PEN2 ,Layer 4 Protocol Enable" "Disabled,Enabled" bitfld.long 0x00 11.--15. " L3HDBM2 ,Layer 3 IP DA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 6.--10. " L3HSBM2 ,Layer 3 IP SA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM2 , Layer 3 IP DA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 4. " L3DAM2 ,Layer 3 IP DA Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " L3SAIM2 , Layer 3 IP SA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 2. " L3SAM2 ,Layer 3 IP SA Match Enable" "Disabled,Enabled" bitfld.long 0x00 0. " L3PEN2 , Layer 3 Protocol Enable" "Disabled,Enabled" line.long 0x04 "LAYER4_ADDRESS2,Layer 4 Address Register2" hexmask.long.word 0x04 16.--31. 1. " L4DP2 ,Layer 4 Destination Port Number Field" hexmask.long.word 0x04 0.--15. 1. " L4SP2 ,Layer 4 Source Port Number Field" group.long (0x460+0x10)++0x0F line.long 0x00 "LAYER3_ADDR0_REG2,Layer 3 Address 0 Register 2" line.long 0x04 "LAYER3_ADDR1_REG2,Layer 3 Address 1 Register 2" line.long 0x08 "LAYER3_ADDR2_REG2,Layer 3 Address 2 Register 2" line.long 0x0C "LAYER3_ADDR3_REG2,Layer 3 Address 3 Register 2" group.long 0x490++0x07 line.long 0x00 "L3_L4_CONTROL3,Layer 3 and Layer 4 Control Register 3" bitfld.long 0x00 21. " L4DPIM3 ,Layer 4 Destination Port Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 20. " L4DPM3 ,Layer 4 Destination Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 19. " L4SPIM3 ,Layer 4 Source Port Inverse Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " L4SPM3 ,Layer 4 Source Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 16. " L4PEN3 ,Layer 4 Protocol Enable" "Disabled,Enabled" bitfld.long 0x00 11.--15. " L3HDBM3 ,Layer 3 IP DA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 6.--10. " L3HSBM3 ,Layer 3 IP SA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM3 , Layer 3 IP DA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 4. " L3DAM3 ,Layer 3 IP DA Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " L3SAIM3 , Layer 3 IP SA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 2. " L3SAM3 ,Layer 3 IP SA Match Enable" "Disabled,Enabled" bitfld.long 0x00 0. " L3PEN3 , Layer 3 Protocol Enable" "Disabled,Enabled" line.long 0x04 "LAYER4_ADDRESS3,Layer 4 Address Register3" hexmask.long.word 0x04 16.--31. 1. " L4DP3 ,Layer 4 Destination Port Number Field" hexmask.long.word 0x04 0.--15. 1. " L4SP3 ,Layer 4 Source Port Number Field" group.long (0x490+0x10)++0x0F line.long 0x00 "LAYER3_ADDR0_REG3,Layer 3 Address 0 Register 3" line.long 0x04 "LAYER3_ADDR1_REG3,Layer 3 Address 1 Register 3" line.long 0x08 "LAYER3_ADDR2_REG3,Layer 3 Address 2 Register 3" line.long 0x0C "LAYER3_ADDR3_REG3,Layer 3 Address 3 Register 3" group.long 0x500++0x1F line.long 0x00 "HASH_TABLE_REG0,Hash Table Register 0" line.long 0x04 "HASH_TABLE_REG1,Hash Table Register 1" line.long 0x08 "HASH_TABLE_REG2,Hash Table Register 2" line.long 0x0C "HASH_TABLE_REG3,Hash Table Register 3" line.long 0x10 "HASH_TABLE_REG4,Hash Table Register 4" line.long 0x14 "HASH_TABLE_REG5,Hash Table Register 5" line.long 0x18 "HASH_TABLE_REG6,Hash Table Register 6" line.long 0x1C "HASH_TABLE_REG7,Hash Table Register 7" group.long 0x584++0x07 line.long 0x00 "VLAN_INCL_REG,VLAN Tag Inclusion or Replacement Register" bitfld.long 0x00 19. " CSVL ,C-VLAN or S-VLAN" "C-VLAN,S-VLAN" bitfld.long 0x00 18. " VLP ,VLAN Priority Control" "Disabled,Enabled" bitfld.long 0x00 16.--17. " VLC ,VLAN Tag Control in Transmit Frames " "No VLAN tag control,VLAN tag deletion,VLAN tag insertion,VLAN tag replacement" textline " " hexmask.long.word 0x00 0.--15. 1. " VLT ,VLAN Tag for Transmit Frames" line.long 0x04 "VLAN_HASH_TABLE_REG,VLAN Hash Table Register" hexmask.long.word 0x04 0.--15. 1. " VLHT ,VLAN Hash Table" group.long 0x700++0x07 line.long 0x00 "TIMESTAMP_CONTROL,Timestamp Control Register" sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 28. " ATSEN3 ,Auxiliary Snapshot 3 Enable" "Disabled,Enabled" rbitfld.long 0x00 27. " ATSEN2 ,Auxiliary Snapshot 2 Enable" "Disabled,Enabled" rbitfld.long 0x00 26. " ATSEN1 ,Auxiliary Snapshot 1 Enable" "Disabled,Enabled" textline " " rbitfld.long 0x00 25. " ATSEN0 ,Auxiliary Snapshot 0 Enable" "Disabled,Enabled" rbitfld.long 0x00 24. " ATSFC ,Auxiliary Snapshot FIFO Clear" "Not cleared,Cleared" textline " " else bitfld.long 0x00 25. " ATSEN0 ,Auxiliary Snapshot 0 Enable" "Disabled,Enabled" bitfld.long 0x00 24. " ATSFC ,Auxiliary Snapshot FIFO Clear" "Not cleared,Cleared" textline " " endif bitfld.long 0x00 18. " TSENMACADDR ,Enable MAC address for PTP Frame Filtering" "Disabled,Enabled" bitfld.long 0x00 16.--17. " SNAPTYPSEL ,Select PTP packets for Taking Snapshots" "0,1,2,3" textline " " bitfld.long 0x00 15. " TSMSTRENA ,Enable Snapshot for Messages Relevant to Master" "Disabled,Enabled" bitfld.long 0x00 14. " TSEVNTENA ,Enable Timestamp Snapshot for Event Messages" "Disabled,Enabled" textline " " bitfld.long 0x00 13. " TSIPV4ENA ,Enable Processing of PTP Frames Sent over IPv4-UDP" "Disabled,Enabled" bitfld.long 0x00 12. " TSIPV6ENA ,Enable Processing of PTP Frames Sent Over IPv6-UDP" "Disabled,Enabled" bitfld.long 0x00 11. " TSIPENA ,Enable Processing of PTP over Ethernet Frames" "Disabled,Enabled" textline " " bitfld.long 0x00 10. " TSVER2ENA ,Enable PTP packet Processing for Version 2 Format" "Disable,Enable" bitfld.long 0x00 9. " TSCTRLSSR ,Timestamp Digital or Binary Rollover Control" "At 0x7FFF_FFFF,At 1ns" bitfld.long 0x00 8. " TSENALL ,Enable Timestamp for All Frames" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 5. " TSADDREG ,Addend Reg Update" "Not updated,Updated" rbitfld.long 0x00 4. " TSTRIG ,Timestamp Interrupt Trigger Enable" "Disabled,Enabled" rbitfld.long 0x00 3. " TSUPDT ,Timestamp Update" "Not updated,Updated" textline " " rbitfld.long 0x00 2. " TSINIT ,Timestamp Initialize" "Not initialized,Initialized" rbitfld.long 0x00 1. " TSCFUPDT ,Timestamp Fine or Coarse Update" "Coarse,Fine" textline " " else bitfld.long 0x00 5. " TSADDREG ,Addend Reg Update" "Not updated,Updated" bitfld.long 0x00 4. " TSTRIG ,Timestamp Interrupt Trigger Enable" "Disabled,Enabled" bitfld.long 0x00 3. " TSUPDT ,Timestamp Update" "Not updated,Updated" textline " " bitfld.long 0x00 2. " TSINIT ,Timestamp Initialize" "Not initialized,Initialized" bitfld.long 0x00 1. " TSCFUPDT ,Timestamp Fine or Coarse Update" "Coarse,Fine" textline " " endif bitfld.long 0x00 0. " TSENA ,Timestamp Enable" "Disabled,Enabled" line.long 0x04 "SUB_SECOND_INCREMENT,Sub-Second Increment Register" hexmask.long.byte 0x04 0.--7. 1. " SSINC ,Sub-second Increment Value" rgroup.long 0x708++0x07 line.long 0x00 "SYSTEM_TIME_SECONDS, System Time - Seconds Register" line.long 0x04 "SYSTEM_TIME_NANOSECONDS,System Time - Nanoseconds Register" hexmask.long 0x04 0.--30. 1. " TSSS ,Timestamp Sub Seconds" group.long 0x710++0x17 line.long 0x00 "SYSTEM_TIME_SECONDS_UPDATE,System Time - Seconds Update Register" line.long 0x04 "SYSTEM_TIME_NANOSECONDS_UPDATE,System Time - Nanoseconds Update Register" bitfld.long 0x04 31. " ADDSUB ,Add or subtract time" "Add,Subtract" hexmask.long 0x04 0.--30. 1. " TSSS ,Timestamp Sub Second" line.long 0x08 "TIMESTAMP_ADDEND,Timestamp Addend Register" line.long 0x0C "TARGET_TIME_SECONDS,Target Time Seconds Register" line.long 0x10 "TARGET_TIME_NANOSECONDS,Target Time Nanoseconds Register" rbitfld.long 0x10 31. " TRGTBUSY ,Target Time Register Busy" "Not busy,Busy" hexmask.long 0x10 0.--30. 1. " TTSLO ,Target Timestamp Low Register" line.long 0x14 "SYSTEM_TIME_HIGHER_WORD_SECONDS,System Time Higher Word Seconds Register" hexmask.long.word 0x14 0.--15. 1. " TSHWR ,Timestamp Higher Word Register" rgroup.long 0x728++0x03 line.long 0x00 "TIMESTAMP_STATUS,Timestamp Status Register" bitfld.long 0x00 25.--29. " ATSNS ,Number of Auxiliary Timestamp Snapshots" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " ATSSTM ,Auxiliary Timestamp Snapshot Trigger Missed" "Not missed,Missed" bitfld.long 0x00 19. " ATSSTN3 ,Auxiliary Timestamp Snapshot Trigger 3 Identifier" "Not available,Available" textline " " bitfld.long 0x00 18. " ATSSTN2 ,Auxiliary Timestamp Snapshot Trigger 2 Identifier" "Not available,Available" bitfld.long 0x00 17. " ATSSTN1 ,Auxiliary Timestamp Snapshot Trigger 1 Identifier" "Not available,Available" bitfld.long 0x00 16. " ATSSTN0 ,Auxiliary Timestamp Snapshot Trigger 0 Identifier" "Not available,Available" textline " " bitfld.long 0x00 3. " TSTRGTERR ,Timestamp Target Time Error" "No error,Error" bitfld.long 0x00 2. " AUXTSTRIG ,Auxiliary Timestamp Trigger Snapshot" "Not written,Written" bitfld.long 0x00 1. " TSTARGT ,Timestamp Target Time Reached" "Not reached,Reached" textline " " bitfld.long 0x00 0. " TSSOVF ,Timestamp Seconds Overflow" "No overflow,Overflow" if (((d.l(ad:0xFF700000+0x72C))&0x10)==0x10) group.long 0x72C++0x03 line.long 0x00 "PPS_CONTROL,PPS Control Register" bitfld.long 0x00 5.--6. " TRGTMODSEL0 ,Target Time Register Mode for PPS0 Output" "Interrupt event,,Int event and PPS0,No interrupts" bitfld.long 0x00 4. " PPSEN0 ,Flexible PPS Output Mode Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0.--3. " PPSCMD0 ,Flexible PPS0 Output" "No command,START Single Pulse,START Pulse Train,Cancel START,STOP Pulse Train at time,STOP Pulse Train immediately,Cancel STOP Pulse Train,?..." else group.long 0x72C++0x03 line.long 0x00 "PPS_CONTROL,PPS Control Register" bitfld.long 0x00 5.--6. " TRGTMODSEL0 ,Target Time Register Mode for PPS0 Output" "Interrupt event,,Int event and PPS0,No interrupts" bitfld.long 0x00 4. " PPSEN0 ,Flexible PPS Output Mode Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0.--3. " PSCTRL0 ,PPS0 Output Frequency Control" ",2Hz/1Hz,4Hz/2HZ,8Hz/4Hz,16Hz/8Hz,32Hz/16Hz,64Hz/32Hz,128Hz/64Hz,256Hz/128Hz,512Hz/256Hz,1024Hz/512Hz,2048Hz/1024Hz,4096Hz/2048Hz,8192Hz/4096Hz,16384Hz/8192Hz,32768Hz/16384Hz" endif rgroup.long 0x730++0x07 line.long 0x00 "AUXILIARY_TIMESTAMP_NANOSECONDS,Auxiliary Timestamp Nanoseconds Register" hexmask.long 0x00 0.--30. 1. " AUXTSLO ,Auxiliary Timestamp Nanoseconds" line.long 0x04 "AUXILIARY_TIMESTAMP_SECONDS,Auxiliary Timestamp Seconds Register" group.long 0x760++0x07 line.long 0x00 "PPS0_INTERVAL,PPS0 Interval Register" line.long 0x04 "PPS0_WIDTH,PPS0 Width Register" width 21. tree "MAC Address 16 - 127 Registers" group.long 0x800++0x037F line.long 0x0 "MAC_ADDRESS16_HIGH,MAC Address16 High Register" bitfld.long 0x0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x0 0.--15. 1. " ADDRHI ,MAC Address16" line.long (0x0+0x04) "MAC_ADDRESS16_LOW,MAC Address16 Low Register" line.long 0x8 "MAC_ADDRESS17_HIGH,MAC Address17 High Register" bitfld.long 0x8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x8 0.--15. 1. " ADDRHI ,MAC Address17" line.long (0x8+0x04) "MAC_ADDRESS17_LOW,MAC Address17 Low Register" line.long 0x10 "MAC_ADDRESS18_HIGH,MAC Address18 High Register" bitfld.long 0x10 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x10 30. " SA ,Source Address" "DA,SA" bitfld.long 0x10 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x10 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x10 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x10 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x10 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x10 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x10 0.--15. 1. " ADDRHI ,MAC Address18" line.long (0x10+0x04) "MAC_ADDRESS18_LOW,MAC Address18 Low Register" line.long 0x18 "MAC_ADDRESS19_HIGH,MAC Address19 High Register" bitfld.long 0x18 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x18 30. " SA ,Source Address" "DA,SA" bitfld.long 0x18 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x18 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x18 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x18 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x18 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x18 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x18 0.--15. 1. " ADDRHI ,MAC Address19" line.long (0x18+0x04) "MAC_ADDRESS19_LOW,MAC Address19 Low Register" line.long 0x20 "MAC_ADDRESS20_HIGH,MAC Address20 High Register" bitfld.long 0x20 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x20 30. " SA ,Source Address" "DA,SA" bitfld.long 0x20 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x20 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x20 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x20 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x20 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x20 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x20 0.--15. 1. " ADDRHI ,MAC Address20" line.long (0x20+0x04) "MAC_ADDRESS20_LOW,MAC Address20 Low Register" line.long 0x28 "MAC_ADDRESS21_HIGH,MAC Address21 High Register" bitfld.long 0x28 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x28 30. " SA ,Source Address" "DA,SA" bitfld.long 0x28 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x28 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x28 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x28 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x28 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x28 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x28 0.--15. 1. " ADDRHI ,MAC Address21" line.long (0x28+0x04) "MAC_ADDRESS21_LOW,MAC Address21 Low Register" line.long 0x30 "MAC_ADDRESS22_HIGH,MAC Address22 High Register" bitfld.long 0x30 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x30 30. " SA ,Source Address" "DA,SA" bitfld.long 0x30 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x30 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x30 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x30 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x30 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x30 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x30 0.--15. 1. " ADDRHI ,MAC Address22" line.long (0x30+0x04) "MAC_ADDRESS22_LOW,MAC Address22 Low Register" line.long 0x38 "MAC_ADDRESS23_HIGH,MAC Address23 High Register" bitfld.long 0x38 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x38 30. " SA ,Source Address" "DA,SA" bitfld.long 0x38 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x38 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x38 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x38 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x38 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x38 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x38 0.--15. 1. " ADDRHI ,MAC Address23" line.long (0x38+0x04) "MAC_ADDRESS23_LOW,MAC Address23 Low Register" line.long 0x40 "MAC_ADDRESS24_HIGH,MAC Address24 High Register" bitfld.long 0x40 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x40 30. " SA ,Source Address" "DA,SA" bitfld.long 0x40 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x40 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x40 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x40 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x40 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x40 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x40 0.--15. 1. " ADDRHI ,MAC Address24" line.long (0x40+0x04) "MAC_ADDRESS24_LOW,MAC Address24 Low Register" line.long 0x48 "MAC_ADDRESS25_HIGH,MAC Address25 High Register" bitfld.long 0x48 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x48 30. " SA ,Source Address" "DA,SA" bitfld.long 0x48 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x48 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x48 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x48 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x48 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x48 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x48 0.--15. 1. " ADDRHI ,MAC Address25" line.long (0x48+0x04) "MAC_ADDRESS25_LOW,MAC Address25 Low Register" line.long 0x50 "MAC_ADDRESS26_HIGH,MAC Address26 High Register" bitfld.long 0x50 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x50 30. " SA ,Source Address" "DA,SA" bitfld.long 0x50 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x50 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x50 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x50 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x50 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x50 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x50 0.--15. 1. " ADDRHI ,MAC Address26" line.long (0x50+0x04) "MAC_ADDRESS26_LOW,MAC Address26 Low Register" line.long 0x58 "MAC_ADDRESS27_HIGH,MAC Address27 High Register" bitfld.long 0x58 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x58 30. " SA ,Source Address" "DA,SA" bitfld.long 0x58 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x58 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x58 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x58 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x58 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x58 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x58 0.--15. 1. " ADDRHI ,MAC Address27" line.long (0x58+0x04) "MAC_ADDRESS27_LOW,MAC Address27 Low Register" line.long 0x60 "MAC_ADDRESS28_HIGH,MAC Address28 High Register" bitfld.long 0x60 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x60 30. " SA ,Source Address" "DA,SA" bitfld.long 0x60 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x60 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x60 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x60 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x60 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x60 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x60 0.--15. 1. " ADDRHI ,MAC Address28" line.long (0x60+0x04) "MAC_ADDRESS28_LOW,MAC Address28 Low Register" line.long 0x68 "MAC_ADDRESS29_HIGH,MAC Address29 High Register" bitfld.long 0x68 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x68 30. " SA ,Source Address" "DA,SA" bitfld.long 0x68 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x68 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x68 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x68 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x68 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x68 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x68 0.--15. 1. " ADDRHI ,MAC Address29" line.long (0x68+0x04) "MAC_ADDRESS29_LOW,MAC Address29 Low Register" line.long 0x70 "MAC_ADDRESS30_HIGH,MAC Address30 High Register" bitfld.long 0x70 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x70 30. " SA ,Source Address" "DA,SA" bitfld.long 0x70 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x70 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x70 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x70 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x70 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x70 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x70 0.--15. 1. " ADDRHI ,MAC Address30" line.long (0x70+0x04) "MAC_ADDRESS30_LOW,MAC Address30 Low Register" line.long 0x78 "MAC_ADDRESS31_HIGH,MAC Address31 High Register" bitfld.long 0x78 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x78 30. " SA ,Source Address" "DA,SA" bitfld.long 0x78 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x78 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x78 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x78 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x78 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x78 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x78 0.--15. 1. " ADDRHI ,MAC Address31" line.long (0x78+0x04) "MAC_ADDRESS31_LOW,MAC Address31 Low Register" line.long 0x80 "MAC_ADDRESS32_HIGH,MAC Address32 High Register" bitfld.long 0x80 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x80 30. " SA ,Source Address" "DA,SA" bitfld.long 0x80 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x80 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x80 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x80 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x80 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x80 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x80 0.--15. 1. " ADDRHI ,MAC Address32" line.long (0x80+0x04) "MAC_ADDRESS32_LOW,MAC Address32 Low Register" line.long 0x88 "MAC_ADDRESS33_HIGH,MAC Address33 High Register" bitfld.long 0x88 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x88 30. " SA ,Source Address" "DA,SA" bitfld.long 0x88 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x88 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x88 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x88 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x88 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x88 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x88 0.--15. 1. " ADDRHI ,MAC Address33" line.long (0x88+0x04) "MAC_ADDRESS33_LOW,MAC Address33 Low Register" line.long 0x90 "MAC_ADDRESS34_HIGH,MAC Address34 High Register" bitfld.long 0x90 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x90 30. " SA ,Source Address" "DA,SA" bitfld.long 0x90 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x90 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x90 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x90 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x90 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x90 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x90 0.--15. 1. " ADDRHI ,MAC Address34" line.long (0x90+0x04) "MAC_ADDRESS34_LOW,MAC Address34 Low Register" line.long 0x98 "MAC_ADDRESS35_HIGH,MAC Address35 High Register" bitfld.long 0x98 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x98 30. " SA ,Source Address" "DA,SA" bitfld.long 0x98 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x98 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x98 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x98 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x98 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x98 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x98 0.--15. 1. " ADDRHI ,MAC Address35" line.long (0x98+0x04) "MAC_ADDRESS35_LOW,MAC Address35 Low Register" line.long 0xA0 "MAC_ADDRESS36_HIGH,MAC Address36 High Register" bitfld.long 0xA0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xA0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xA0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xA0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xA0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xA0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xA0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xA0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xA0 0.--15. 1. " ADDRHI ,MAC Address36" line.long (0xA0+0x04) "MAC_ADDRESS36_LOW,MAC Address36 Low Register" line.long 0xA8 "MAC_ADDRESS37_HIGH,MAC Address37 High Register" bitfld.long 0xA8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xA8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xA8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xA8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xA8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xA8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xA8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xA8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xA8 0.--15. 1. " ADDRHI ,MAC Address37" line.long (0xA8+0x04) "MAC_ADDRESS37_LOW,MAC Address37 Low Register" line.long 0xB0 "MAC_ADDRESS38_HIGH,MAC Address38 High Register" bitfld.long 0xB0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xB0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xB0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xB0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xB0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xB0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xB0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xB0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xB0 0.--15. 1. " ADDRHI ,MAC Address38" line.long (0xB0+0x04) "MAC_ADDRESS38_LOW,MAC Address38 Low Register" line.long 0xB8 "MAC_ADDRESS39_HIGH,MAC Address39 High Register" bitfld.long 0xB8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xB8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xB8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xB8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xB8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xB8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xB8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xB8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xB8 0.--15. 1. " ADDRHI ,MAC Address39" line.long (0xB8+0x04) "MAC_ADDRESS39_LOW,MAC Address39 Low Register" line.long 0xC0 "MAC_ADDRESS40_HIGH,MAC Address40 High Register" bitfld.long 0xC0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xC0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xC0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xC0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xC0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xC0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xC0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xC0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xC0 0.--15. 1. " ADDRHI ,MAC Address40" line.long (0xC0+0x04) "MAC_ADDRESS40_LOW,MAC Address40 Low Register" line.long 0xC8 "MAC_ADDRESS41_HIGH,MAC Address41 High Register" bitfld.long 0xC8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xC8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xC8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xC8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xC8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xC8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xC8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xC8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xC8 0.--15. 1. " ADDRHI ,MAC Address41" line.long (0xC8+0x04) "MAC_ADDRESS41_LOW,MAC Address41 Low Register" line.long 0xD0 "MAC_ADDRESS42_HIGH,MAC Address42 High Register" bitfld.long 0xD0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xD0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xD0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xD0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xD0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xD0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xD0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xD0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xD0 0.--15. 1. " ADDRHI ,MAC Address42" line.long (0xD0+0x04) "MAC_ADDRESS42_LOW,MAC Address42 Low Register" line.long 0xD8 "MAC_ADDRESS43_HIGH,MAC Address43 High Register" bitfld.long 0xD8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xD8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xD8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xD8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xD8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xD8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xD8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xD8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xD8 0.--15. 1. " ADDRHI ,MAC Address43" line.long (0xD8+0x04) "MAC_ADDRESS43_LOW,MAC Address43 Low Register" line.long 0xE0 "MAC_ADDRESS44_HIGH,MAC Address44 High Register" bitfld.long 0xE0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xE0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xE0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xE0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xE0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xE0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xE0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xE0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xE0 0.--15. 1. " ADDRHI ,MAC Address44" line.long (0xE0+0x04) "MAC_ADDRESS44_LOW,MAC Address44 Low Register" line.long 0xE8 "MAC_ADDRESS45_HIGH,MAC Address45 High Register" bitfld.long 0xE8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xE8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xE8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xE8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xE8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xE8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xE8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xE8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xE8 0.--15. 1. " ADDRHI ,MAC Address45" line.long (0xE8+0x04) "MAC_ADDRESS45_LOW,MAC Address45 Low Register" line.long 0xF0 "MAC_ADDRESS46_HIGH,MAC Address46 High Register" bitfld.long 0xF0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xF0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xF0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xF0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xF0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xF0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xF0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xF0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xF0 0.--15. 1. " ADDRHI ,MAC Address46" line.long (0xF0+0x04) "MAC_ADDRESS46_LOW,MAC Address46 Low Register" line.long 0xF8 "MAC_ADDRESS47_HIGH,MAC Address47 High Register" bitfld.long 0xF8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xF8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xF8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xF8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xF8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xF8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xF8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xF8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xF8 0.--15. 1. " ADDRHI ,MAC Address47" line.long (0xF8+0x04) "MAC_ADDRESS47_LOW,MAC Address47 Low Register" line.long 0x100 "MAC_ADDRESS48_HIGH,MAC Address48 High Register" bitfld.long 0x100 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x100 30. " SA ,Source Address" "DA,SA" bitfld.long 0x100 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x100 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x100 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x100 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x100 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x100 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x100 0.--15. 1. " ADDRHI ,MAC Address48" line.long (0x100+0x04) "MAC_ADDRESS48_LOW,MAC Address48 Low Register" line.long 0x108 "MAC_ADDRESS49_HIGH,MAC Address49 High Register" bitfld.long 0x108 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x108 30. " SA ,Source Address" "DA,SA" bitfld.long 0x108 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x108 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x108 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x108 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x108 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x108 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x108 0.--15. 1. " ADDRHI ,MAC Address49" line.long (0x108+0x04) "MAC_ADDRESS49_LOW,MAC Address49 Low Register" line.long 0x110 "MAC_ADDRESS50_HIGH,MAC Address50 High Register" bitfld.long 0x110 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x110 30. " SA ,Source Address" "DA,SA" bitfld.long 0x110 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x110 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x110 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x110 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x110 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x110 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x110 0.--15. 1. " ADDRHI ,MAC Address50" line.long (0x110+0x04) "MAC_ADDRESS50_LOW,MAC Address50 Low Register" line.long 0x118 "MAC_ADDRESS51_HIGH,MAC Address51 High Register" bitfld.long 0x118 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x118 30. " SA ,Source Address" "DA,SA" bitfld.long 0x118 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x118 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x118 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x118 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x118 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x118 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x118 0.--15. 1. " ADDRHI ,MAC Address51" line.long (0x118+0x04) "MAC_ADDRESS51_LOW,MAC Address51 Low Register" line.long 0x120 "MAC_ADDRESS52_HIGH,MAC Address52 High Register" bitfld.long 0x120 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x120 30. " SA ,Source Address" "DA,SA" bitfld.long 0x120 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x120 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x120 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x120 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x120 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x120 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x120 0.--15. 1. " ADDRHI ,MAC Address52" line.long (0x120+0x04) "MAC_ADDRESS52_LOW,MAC Address52 Low Register" line.long 0x128 "MAC_ADDRESS53_HIGH,MAC Address53 High Register" bitfld.long 0x128 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x128 30. " SA ,Source Address" "DA,SA" bitfld.long 0x128 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x128 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x128 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x128 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x128 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x128 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x128 0.--15. 1. " ADDRHI ,MAC Address53" line.long (0x128+0x04) "MAC_ADDRESS53_LOW,MAC Address53 Low Register" line.long 0x130 "MAC_ADDRESS54_HIGH,MAC Address54 High Register" bitfld.long 0x130 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x130 30. " SA ,Source Address" "DA,SA" bitfld.long 0x130 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x130 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x130 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x130 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x130 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x130 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x130 0.--15. 1. " ADDRHI ,MAC Address54" line.long (0x130+0x04) "MAC_ADDRESS54_LOW,MAC Address54 Low Register" line.long 0x138 "MAC_ADDRESS55_HIGH,MAC Address55 High Register" bitfld.long 0x138 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x138 30. " SA ,Source Address" "DA,SA" bitfld.long 0x138 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x138 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x138 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x138 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x138 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x138 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x138 0.--15. 1. " ADDRHI ,MAC Address55" line.long (0x138+0x04) "MAC_ADDRESS55_LOW,MAC Address55 Low Register" line.long 0x140 "MAC_ADDRESS56_HIGH,MAC Address56 High Register" bitfld.long 0x140 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x140 30. " SA ,Source Address" "DA,SA" bitfld.long 0x140 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x140 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x140 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x140 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x140 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x140 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x140 0.--15. 1. " ADDRHI ,MAC Address56" line.long (0x140+0x04) "MAC_ADDRESS56_LOW,MAC Address56 Low Register" line.long 0x148 "MAC_ADDRESS57_HIGH,MAC Address57 High Register" bitfld.long 0x148 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x148 30. " SA ,Source Address" "DA,SA" bitfld.long 0x148 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x148 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x148 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x148 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x148 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x148 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x148 0.--15. 1. " ADDRHI ,MAC Address57" line.long (0x148+0x04) "MAC_ADDRESS57_LOW,MAC Address57 Low Register" line.long 0x150 "MAC_ADDRESS58_HIGH,MAC Address58 High Register" bitfld.long 0x150 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x150 30. " SA ,Source Address" "DA,SA" bitfld.long 0x150 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x150 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x150 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x150 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x150 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x150 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x150 0.--15. 1. " ADDRHI ,MAC Address58" line.long (0x150+0x04) "MAC_ADDRESS58_LOW,MAC Address58 Low Register" line.long 0x158 "MAC_ADDRESS59_HIGH,MAC Address59 High Register" bitfld.long 0x158 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x158 30. " SA ,Source Address" "DA,SA" bitfld.long 0x158 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x158 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x158 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x158 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x158 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x158 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x158 0.--15. 1. " ADDRHI ,MAC Address59" line.long (0x158+0x04) "MAC_ADDRESS59_LOW,MAC Address59 Low Register" line.long 0x160 "MAC_ADDRESS60_HIGH,MAC Address60 High Register" bitfld.long 0x160 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x160 30. " SA ,Source Address" "DA,SA" bitfld.long 0x160 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x160 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x160 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x160 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x160 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x160 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x160 0.--15. 1. " ADDRHI ,MAC Address60" line.long (0x160+0x04) "MAC_ADDRESS60_LOW,MAC Address60 Low Register" line.long 0x168 "MAC_ADDRESS61_HIGH,MAC Address61 High Register" bitfld.long 0x168 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x168 30. " SA ,Source Address" "DA,SA" bitfld.long 0x168 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x168 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x168 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x168 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x168 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x168 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x168 0.--15. 1. " ADDRHI ,MAC Address61" line.long (0x168+0x04) "MAC_ADDRESS61_LOW,MAC Address61 Low Register" line.long 0x170 "MAC_ADDRESS62_HIGH,MAC Address62 High Register" bitfld.long 0x170 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x170 30. " SA ,Source Address" "DA,SA" bitfld.long 0x170 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x170 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x170 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x170 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x170 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x170 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x170 0.--15. 1. " ADDRHI ,MAC Address62" line.long (0x170+0x04) "MAC_ADDRESS62_LOW,MAC Address62 Low Register" line.long 0x178 "MAC_ADDRESS63_HIGH,MAC Address63 High Register" bitfld.long 0x178 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x178 30. " SA ,Source Address" "DA,SA" bitfld.long 0x178 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x178 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x178 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x178 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x178 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x178 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x178 0.--15. 1. " ADDRHI ,MAC Address63" line.long (0x178+0x04) "MAC_ADDRESS63_LOW,MAC Address63 Low Register" line.long 0x180 "MAC_ADDRESS64_HIGH,MAC Address64 High Register" bitfld.long 0x180 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x180 30. " SA ,Source Address" "DA,SA" bitfld.long 0x180 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x180 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x180 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x180 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x180 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x180 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x180 0.--15. 1. " ADDRHI ,MAC Address64" line.long (0x180+0x04) "MAC_ADDRESS64_LOW,MAC Address64 Low Register" line.long 0x188 "MAC_ADDRESS65_HIGH,MAC Address65 High Register" bitfld.long 0x188 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x188 30. " SA ,Source Address" "DA,SA" bitfld.long 0x188 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x188 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x188 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x188 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x188 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x188 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x188 0.--15. 1. " ADDRHI ,MAC Address65" line.long (0x188+0x04) "MAC_ADDRESS65_LOW,MAC Address65 Low Register" line.long 0x190 "MAC_ADDRESS66_HIGH,MAC Address66 High Register" bitfld.long 0x190 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x190 30. " SA ,Source Address" "DA,SA" bitfld.long 0x190 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x190 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x190 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x190 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x190 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x190 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x190 0.--15. 1. " ADDRHI ,MAC Address66" line.long (0x190+0x04) "MAC_ADDRESS66_LOW,MAC Address66 Low Register" line.long 0x198 "MAC_ADDRESS67_HIGH,MAC Address67 High Register" bitfld.long 0x198 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x198 30. " SA ,Source Address" "DA,SA" bitfld.long 0x198 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x198 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x198 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x198 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x198 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x198 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x198 0.--15. 1. " ADDRHI ,MAC Address67" line.long (0x198+0x04) "MAC_ADDRESS67_LOW,MAC Address67 Low Register" line.long 0x1A0 "MAC_ADDRESS68_HIGH,MAC Address68 High Register" bitfld.long 0x1A0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1A0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1A0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1A0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1A0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1A0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1A0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1A0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1A0 0.--15. 1. " ADDRHI ,MAC Address68" line.long (0x1A0+0x04) "MAC_ADDRESS68_LOW,MAC Address68 Low Register" line.long 0x1A8 "MAC_ADDRESS69_HIGH,MAC Address69 High Register" bitfld.long 0x1A8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1A8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1A8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1A8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1A8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1A8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1A8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1A8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1A8 0.--15. 1. " ADDRHI ,MAC Address69" line.long (0x1A8+0x04) "MAC_ADDRESS69_LOW,MAC Address69 Low Register" line.long 0x1B0 "MAC_ADDRESS70_HIGH,MAC Address70 High Register" bitfld.long 0x1B0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1B0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1B0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1B0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1B0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1B0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1B0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1B0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1B0 0.--15. 1. " ADDRHI ,MAC Address70" line.long (0x1B0+0x04) "MAC_ADDRESS70_LOW,MAC Address70 Low Register" line.long 0x1B8 "MAC_ADDRESS71_HIGH,MAC Address71 High Register" bitfld.long 0x1B8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1B8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1B8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1B8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1B8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1B8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1B8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1B8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1B8 0.--15. 1. " ADDRHI ,MAC Address71" line.long (0x1B8+0x04) "MAC_ADDRESS71_LOW,MAC Address71 Low Register" line.long 0x1C0 "MAC_ADDRESS72_HIGH,MAC Address72 High Register" bitfld.long 0x1C0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1C0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1C0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1C0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1C0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1C0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1C0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1C0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1C0 0.--15. 1. " ADDRHI ,MAC Address72" line.long (0x1C0+0x04) "MAC_ADDRESS72_LOW,MAC Address72 Low Register" line.long 0x1C8 "MAC_ADDRESS73_HIGH,MAC Address73 High Register" bitfld.long 0x1C8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1C8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1C8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1C8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1C8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1C8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1C8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1C8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1C8 0.--15. 1. " ADDRHI ,MAC Address73" line.long (0x1C8+0x04) "MAC_ADDRESS73_LOW,MAC Address73 Low Register" line.long 0x1D0 "MAC_ADDRESS74_HIGH,MAC Address74 High Register" bitfld.long 0x1D0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1D0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1D0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1D0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1D0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1D0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1D0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1D0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1D0 0.--15. 1. " ADDRHI ,MAC Address74" line.long (0x1D0+0x04) "MAC_ADDRESS74_LOW,MAC Address74 Low Register" line.long 0x1D8 "MAC_ADDRESS75_HIGH,MAC Address75 High Register" bitfld.long 0x1D8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1D8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1D8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1D8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1D8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1D8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1D8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1D8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1D8 0.--15. 1. " ADDRHI ,MAC Address75" line.long (0x1D8+0x04) "MAC_ADDRESS75_LOW,MAC Address75 Low Register" line.long 0x1E0 "MAC_ADDRESS76_HIGH,MAC Address76 High Register" bitfld.long 0x1E0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1E0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1E0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1E0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1E0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1E0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1E0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1E0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1E0 0.--15. 1. " ADDRHI ,MAC Address76" line.long (0x1E0+0x04) "MAC_ADDRESS76_LOW,MAC Address76 Low Register" line.long 0x1E8 "MAC_ADDRESS77_HIGH,MAC Address77 High Register" bitfld.long 0x1E8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1E8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1E8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1E8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1E8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1E8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1E8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1E8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1E8 0.--15. 1. " ADDRHI ,MAC Address77" line.long (0x1E8+0x04) "MAC_ADDRESS77_LOW,MAC Address77 Low Register" line.long 0x1F0 "MAC_ADDRESS78_HIGH,MAC Address78 High Register" bitfld.long 0x1F0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1F0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1F0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1F0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1F0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1F0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1F0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1F0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1F0 0.--15. 1. " ADDRHI ,MAC Address78" line.long (0x1F0+0x04) "MAC_ADDRESS78_LOW,MAC Address78 Low Register" line.long 0x1F8 "MAC_ADDRESS79_HIGH,MAC Address79 High Register" bitfld.long 0x1F8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1F8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1F8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1F8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1F8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1F8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1F8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1F8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1F8 0.--15. 1. " ADDRHI ,MAC Address79" line.long (0x1F8+0x04) "MAC_ADDRESS79_LOW,MAC Address79 Low Register" line.long 0x200 "MAC_ADDRESS80_HIGH,MAC Address80 High Register" bitfld.long 0x200 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x200 30. " SA ,Source Address" "DA,SA" bitfld.long 0x200 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x200 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x200 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x200 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x200 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x200 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x200 0.--15. 1. " ADDRHI ,MAC Address80" line.long (0x200+0x04) "MAC_ADDRESS80_LOW,MAC Address80 Low Register" line.long 0x208 "MAC_ADDRESS81_HIGH,MAC Address81 High Register" bitfld.long 0x208 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x208 30. " SA ,Source Address" "DA,SA" bitfld.long 0x208 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x208 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x208 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x208 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x208 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x208 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x208 0.--15. 1. " ADDRHI ,MAC Address81" line.long (0x208+0x04) "MAC_ADDRESS81_LOW,MAC Address81 Low Register" line.long 0x210 "MAC_ADDRESS82_HIGH,MAC Address82 High Register" bitfld.long 0x210 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x210 30. " SA ,Source Address" "DA,SA" bitfld.long 0x210 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x210 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x210 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x210 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x210 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x210 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x210 0.--15. 1. " ADDRHI ,MAC Address82" line.long (0x210+0x04) "MAC_ADDRESS82_LOW,MAC Address82 Low Register" line.long 0x218 "MAC_ADDRESS83_HIGH,MAC Address83 High Register" bitfld.long 0x218 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x218 30. " SA ,Source Address" "DA,SA" bitfld.long 0x218 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x218 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x218 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x218 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x218 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x218 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x218 0.--15. 1. " ADDRHI ,MAC Address83" line.long (0x218+0x04) "MAC_ADDRESS83_LOW,MAC Address83 Low Register" line.long 0x220 "MAC_ADDRESS84_HIGH,MAC Address84 High Register" bitfld.long 0x220 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x220 30. " SA ,Source Address" "DA,SA" bitfld.long 0x220 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x220 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x220 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x220 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x220 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x220 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x220 0.--15. 1. " ADDRHI ,MAC Address84" line.long (0x220+0x04) "MAC_ADDRESS84_LOW,MAC Address84 Low Register" line.long 0x228 "MAC_ADDRESS85_HIGH,MAC Address85 High Register" bitfld.long 0x228 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x228 30. " SA ,Source Address" "DA,SA" bitfld.long 0x228 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x228 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x228 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x228 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x228 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x228 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x228 0.--15. 1. " ADDRHI ,MAC Address85" line.long (0x228+0x04) "MAC_ADDRESS85_LOW,MAC Address85 Low Register" line.long 0x230 "MAC_ADDRESS86_HIGH,MAC Address86 High Register" bitfld.long 0x230 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x230 30. " SA ,Source Address" "DA,SA" bitfld.long 0x230 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x230 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x230 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x230 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x230 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x230 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x230 0.--15. 1. " ADDRHI ,MAC Address86" line.long (0x230+0x04) "MAC_ADDRESS86_LOW,MAC Address86 Low Register" line.long 0x238 "MAC_ADDRESS87_HIGH,MAC Address87 High Register" bitfld.long 0x238 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x238 30. " SA ,Source Address" "DA,SA" bitfld.long 0x238 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x238 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x238 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x238 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x238 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x238 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x238 0.--15. 1. " ADDRHI ,MAC Address87" line.long (0x238+0x04) "MAC_ADDRESS87_LOW,MAC Address87 Low Register" line.long 0x240 "MAC_ADDRESS88_HIGH,MAC Address88 High Register" bitfld.long 0x240 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x240 30. " SA ,Source Address" "DA,SA" bitfld.long 0x240 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x240 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x240 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x240 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x240 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x240 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x240 0.--15. 1. " ADDRHI ,MAC Address88" line.long (0x240+0x04) "MAC_ADDRESS88_LOW,MAC Address88 Low Register" line.long 0x248 "MAC_ADDRESS89_HIGH,MAC Address89 High Register" bitfld.long 0x248 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x248 30. " SA ,Source Address" "DA,SA" bitfld.long 0x248 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x248 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x248 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x248 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x248 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x248 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x248 0.--15. 1. " ADDRHI ,MAC Address89" line.long (0x248+0x04) "MAC_ADDRESS89_LOW,MAC Address89 Low Register" line.long 0x250 "MAC_ADDRESS90_HIGH,MAC Address90 High Register" bitfld.long 0x250 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x250 30. " SA ,Source Address" "DA,SA" bitfld.long 0x250 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x250 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x250 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x250 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x250 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x250 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x250 0.--15. 1. " ADDRHI ,MAC Address90" line.long (0x250+0x04) "MAC_ADDRESS90_LOW,MAC Address90 Low Register" line.long 0x258 "MAC_ADDRESS91_HIGH,MAC Address91 High Register" bitfld.long 0x258 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x258 30. " SA ,Source Address" "DA,SA" bitfld.long 0x258 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x258 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x258 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x258 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x258 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x258 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x258 0.--15. 1. " ADDRHI ,MAC Address91" line.long (0x258+0x04) "MAC_ADDRESS91_LOW,MAC Address91 Low Register" line.long 0x260 "MAC_ADDRESS92_HIGH,MAC Address92 High Register" bitfld.long 0x260 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x260 30. " SA ,Source Address" "DA,SA" bitfld.long 0x260 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x260 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x260 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x260 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x260 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x260 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x260 0.--15. 1. " ADDRHI ,MAC Address92" line.long (0x260+0x04) "MAC_ADDRESS92_LOW,MAC Address92 Low Register" line.long 0x268 "MAC_ADDRESS93_HIGH,MAC Address93 High Register" bitfld.long 0x268 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x268 30. " SA ,Source Address" "DA,SA" bitfld.long 0x268 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x268 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x268 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x268 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x268 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x268 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x268 0.--15. 1. " ADDRHI ,MAC Address93" line.long (0x268+0x04) "MAC_ADDRESS93_LOW,MAC Address93 Low Register" line.long 0x270 "MAC_ADDRESS94_HIGH,MAC Address94 High Register" bitfld.long 0x270 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x270 30. " SA ,Source Address" "DA,SA" bitfld.long 0x270 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x270 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x270 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x270 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x270 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x270 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x270 0.--15. 1. " ADDRHI ,MAC Address94" line.long (0x270+0x04) "MAC_ADDRESS94_LOW,MAC Address94 Low Register" line.long 0x278 "MAC_ADDRESS95_HIGH,MAC Address95 High Register" bitfld.long 0x278 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x278 30. " SA ,Source Address" "DA,SA" bitfld.long 0x278 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x278 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x278 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x278 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x278 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x278 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x278 0.--15. 1. " ADDRHI ,MAC Address95" line.long (0x278+0x04) "MAC_ADDRESS95_LOW,MAC Address95 Low Register" line.long 0x280 "MAC_ADDRESS96_HIGH,MAC Address96 High Register" bitfld.long 0x280 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x280 30. " SA ,Source Address" "DA,SA" bitfld.long 0x280 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x280 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x280 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x280 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x280 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x280 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x280 0.--15. 1. " ADDRHI ,MAC Address96" line.long (0x280+0x04) "MAC_ADDRESS96_LOW,MAC Address96 Low Register" line.long 0x288 "MAC_ADDRESS97_HIGH,MAC Address97 High Register" bitfld.long 0x288 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x288 30. " SA ,Source Address" "DA,SA" bitfld.long 0x288 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x288 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x288 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x288 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x288 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x288 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x288 0.--15. 1. " ADDRHI ,MAC Address97" line.long (0x288+0x04) "MAC_ADDRESS97_LOW,MAC Address97 Low Register" line.long 0x290 "MAC_ADDRESS98_HIGH,MAC Address98 High Register" bitfld.long 0x290 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x290 30. " SA ,Source Address" "DA,SA" bitfld.long 0x290 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x290 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x290 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x290 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x290 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x290 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x290 0.--15. 1. " ADDRHI ,MAC Address98" line.long (0x290+0x04) "MAC_ADDRESS98_LOW,MAC Address98 Low Register" line.long 0x298 "MAC_ADDRESS99_HIGH,MAC Address99 High Register" bitfld.long 0x298 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x298 30. " SA ,Source Address" "DA,SA" bitfld.long 0x298 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x298 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x298 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x298 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x298 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x298 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x298 0.--15. 1. " ADDRHI ,MAC Address99" line.long (0x298+0x04) "MAC_ADDRESS99_LOW,MAC Address99 Low Register" line.long 0x2A0 "MAC_ADDRESS100_HIGH,MAC Address100 High Register" bitfld.long 0x2A0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2A0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2A0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2A0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2A0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2A0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2A0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2A0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2A0 0.--15. 1. " ADDRHI ,MAC Address100" line.long (0x2A0+0x04) "MAC_ADDRESS100_LOW,MAC Address100 Low Register" line.long 0x2A8 "MAC_ADDRESS101_HIGH,MAC Address101 High Register" bitfld.long 0x2A8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2A8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2A8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2A8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2A8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2A8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2A8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2A8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2A8 0.--15. 1. " ADDRHI ,MAC Address101" line.long (0x2A8+0x04) "MAC_ADDRESS101_LOW,MAC Address101 Low Register" line.long 0x2B0 "MAC_ADDRESS102_HIGH,MAC Address102 High Register" bitfld.long 0x2B0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2B0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2B0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2B0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2B0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2B0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2B0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2B0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2B0 0.--15. 1. " ADDRHI ,MAC Address102" line.long (0x2B0+0x04) "MAC_ADDRESS102_LOW,MAC Address102 Low Register" line.long 0x2B8 "MAC_ADDRESS103_HIGH,MAC Address103 High Register" bitfld.long 0x2B8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2B8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2B8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2B8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2B8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2B8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2B8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2B8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2B8 0.--15. 1. " ADDRHI ,MAC Address103" line.long (0x2B8+0x04) "MAC_ADDRESS103_LOW,MAC Address103 Low Register" line.long 0x2C0 "MAC_ADDRESS104_HIGH,MAC Address104 High Register" bitfld.long 0x2C0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2C0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2C0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2C0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2C0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2C0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2C0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2C0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2C0 0.--15. 1. " ADDRHI ,MAC Address104" line.long (0x2C0+0x04) "MAC_ADDRESS104_LOW,MAC Address104 Low Register" line.long 0x2C8 "MAC_ADDRESS105_HIGH,MAC Address105 High Register" bitfld.long 0x2C8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2C8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2C8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2C8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2C8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2C8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2C8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2C8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2C8 0.--15. 1. " ADDRHI ,MAC Address105" line.long (0x2C8+0x04) "MAC_ADDRESS105_LOW,MAC Address105 Low Register" line.long 0x2D0 "MAC_ADDRESS106_HIGH,MAC Address106 High Register" bitfld.long 0x2D0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2D0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2D0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2D0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2D0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2D0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2D0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2D0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2D0 0.--15. 1. " ADDRHI ,MAC Address106" line.long (0x2D0+0x04) "MAC_ADDRESS106_LOW,MAC Address106 Low Register" line.long 0x2D8 "MAC_ADDRESS107_HIGH,MAC Address107 High Register" bitfld.long 0x2D8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2D8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2D8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2D8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2D8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2D8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2D8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2D8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2D8 0.--15. 1. " ADDRHI ,MAC Address107" line.long (0x2D8+0x04) "MAC_ADDRESS107_LOW,MAC Address107 Low Register" line.long 0x2E0 "MAC_ADDRESS108_HIGH,MAC Address108 High Register" bitfld.long 0x2E0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2E0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2E0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2E0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2E0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2E0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2E0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2E0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2E0 0.--15. 1. " ADDRHI ,MAC Address108" line.long (0x2E0+0x04) "MAC_ADDRESS108_LOW,MAC Address108 Low Register" line.long 0x2E8 "MAC_ADDRESS109_HIGH,MAC Address109 High Register" bitfld.long 0x2E8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2E8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2E8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2E8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2E8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2E8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2E8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2E8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2E8 0.--15. 1. " ADDRHI ,MAC Address109" line.long (0x2E8+0x04) "MAC_ADDRESS109_LOW,MAC Address109 Low Register" line.long 0x2F0 "MAC_ADDRESS110_HIGH,MAC Address110 High Register" bitfld.long 0x2F0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2F0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2F0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2F0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2F0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2F0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2F0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2F0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2F0 0.--15. 1. " ADDRHI ,MAC Address110" line.long (0x2F0+0x04) "MAC_ADDRESS110_LOW,MAC Address110 Low Register" line.long 0x2F8 "MAC_ADDRESS111_HIGH,MAC Address111 High Register" bitfld.long 0x2F8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2F8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2F8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2F8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2F8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2F8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2F8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2F8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2F8 0.--15. 1. " ADDRHI ,MAC Address111" line.long (0x2F8+0x04) "MAC_ADDRESS111_LOW,MAC Address111 Low Register" line.long 0x300 "MAC_ADDRESS112_HIGH,MAC Address112 High Register" bitfld.long 0x300 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x300 30. " SA ,Source Address" "DA,SA" bitfld.long 0x300 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x300 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x300 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x300 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x300 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x300 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x300 0.--15. 1. " ADDRHI ,MAC Address112" line.long (0x300+0x04) "MAC_ADDRESS112_LOW,MAC Address112 Low Register" line.long 0x308 "MAC_ADDRESS113_HIGH,MAC Address113 High Register" bitfld.long 0x308 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x308 30. " SA ,Source Address" "DA,SA" bitfld.long 0x308 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x308 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x308 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x308 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x308 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x308 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x308 0.--15. 1. " ADDRHI ,MAC Address113" line.long (0x308+0x04) "MAC_ADDRESS113_LOW,MAC Address113 Low Register" line.long 0x310 "MAC_ADDRESS114_HIGH,MAC Address114 High Register" bitfld.long 0x310 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x310 30. " SA ,Source Address" "DA,SA" bitfld.long 0x310 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x310 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x310 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x310 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x310 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x310 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x310 0.--15. 1. " ADDRHI ,MAC Address114" line.long (0x310+0x04) "MAC_ADDRESS114_LOW,MAC Address114 Low Register" line.long 0x318 "MAC_ADDRESS115_HIGH,MAC Address115 High Register" bitfld.long 0x318 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x318 30. " SA ,Source Address" "DA,SA" bitfld.long 0x318 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x318 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x318 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x318 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x318 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x318 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x318 0.--15. 1. " ADDRHI ,MAC Address115" line.long (0x318+0x04) "MAC_ADDRESS115_LOW,MAC Address115 Low Register" line.long 0x320 "MAC_ADDRESS116_HIGH,MAC Address116 High Register" bitfld.long 0x320 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x320 30. " SA ,Source Address" "DA,SA" bitfld.long 0x320 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x320 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x320 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x320 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x320 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x320 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x320 0.--15. 1. " ADDRHI ,MAC Address116" line.long (0x320+0x04) "MAC_ADDRESS116_LOW,MAC Address116 Low Register" line.long 0x328 "MAC_ADDRESS117_HIGH,MAC Address117 High Register" bitfld.long 0x328 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x328 30. " SA ,Source Address" "DA,SA" bitfld.long 0x328 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x328 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x328 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x328 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x328 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x328 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x328 0.--15. 1. " ADDRHI ,MAC Address117" line.long (0x328+0x04) "MAC_ADDRESS117_LOW,MAC Address117 Low Register" line.long 0x330 "MAC_ADDRESS118_HIGH,MAC Address118 High Register" bitfld.long 0x330 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x330 30. " SA ,Source Address" "DA,SA" bitfld.long 0x330 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x330 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x330 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x330 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x330 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x330 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x330 0.--15. 1. " ADDRHI ,MAC Address118" line.long (0x330+0x04) "MAC_ADDRESS118_LOW,MAC Address118 Low Register" line.long 0x338 "MAC_ADDRESS119_HIGH,MAC Address119 High Register" bitfld.long 0x338 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x338 30. " SA ,Source Address" "DA,SA" bitfld.long 0x338 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x338 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x338 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x338 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x338 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x338 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x338 0.--15. 1. " ADDRHI ,MAC Address119" line.long (0x338+0x04) "MAC_ADDRESS119_LOW,MAC Address119 Low Register" line.long 0x340 "MAC_ADDRESS120_HIGH,MAC Address120 High Register" bitfld.long 0x340 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x340 30. " SA ,Source Address" "DA,SA" bitfld.long 0x340 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x340 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x340 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x340 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x340 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x340 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x340 0.--15. 1. " ADDRHI ,MAC Address120" line.long (0x340+0x04) "MAC_ADDRESS120_LOW,MAC Address120 Low Register" line.long 0x348 "MAC_ADDRESS121_HIGH,MAC Address121 High Register" bitfld.long 0x348 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x348 30. " SA ,Source Address" "DA,SA" bitfld.long 0x348 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x348 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x348 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x348 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x348 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x348 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x348 0.--15. 1. " ADDRHI ,MAC Address121" line.long (0x348+0x04) "MAC_ADDRESS121_LOW,MAC Address121 Low Register" line.long 0x350 "MAC_ADDRESS122_HIGH,MAC Address122 High Register" bitfld.long 0x350 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x350 30. " SA ,Source Address" "DA,SA" bitfld.long 0x350 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x350 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x350 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x350 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x350 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x350 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x350 0.--15. 1. " ADDRHI ,MAC Address122" line.long (0x350+0x04) "MAC_ADDRESS122_LOW,MAC Address122 Low Register" line.long 0x358 "MAC_ADDRESS123_HIGH,MAC Address123 High Register" bitfld.long 0x358 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x358 30. " SA ,Source Address" "DA,SA" bitfld.long 0x358 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x358 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x358 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x358 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x358 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x358 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x358 0.--15. 1. " ADDRHI ,MAC Address123" line.long (0x358+0x04) "MAC_ADDRESS123_LOW,MAC Address123 Low Register" line.long 0x360 "MAC_ADDRESS124_HIGH,MAC Address124 High Register" bitfld.long 0x360 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x360 30. " SA ,Source Address" "DA,SA" bitfld.long 0x360 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x360 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x360 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x360 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x360 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x360 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x360 0.--15. 1. " ADDRHI ,MAC Address124" line.long (0x360+0x04) "MAC_ADDRESS124_LOW,MAC Address124 Low Register" line.long 0x368 "MAC_ADDRESS125_HIGH,MAC Address125 High Register" bitfld.long 0x368 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x368 30. " SA ,Source Address" "DA,SA" bitfld.long 0x368 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x368 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x368 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x368 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x368 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x368 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x368 0.--15. 1. " ADDRHI ,MAC Address125" line.long (0x368+0x04) "MAC_ADDRESS125_LOW,MAC Address125 Low Register" line.long 0x370 "MAC_ADDRESS126_HIGH,MAC Address126 High Register" bitfld.long 0x370 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x370 30. " SA ,Source Address" "DA,SA" bitfld.long 0x370 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x370 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x370 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x370 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x370 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x370 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x370 0.--15. 1. " ADDRHI ,MAC Address126" line.long (0x370+0x04) "MAC_ADDRESS126_LOW,MAC Address126 Low Register" line.long 0x378 "MAC_ADDRESS127_HIGH,MAC Address127 High Register" bitfld.long 0x378 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x378 30. " SA ,Source Address" "DA,SA" bitfld.long 0x378 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x378 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x378 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x378 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x378 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x378 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x378 0.--15. 1. " ADDRHI ,MAC Address127" line.long (0x378+0x04) "MAC_ADDRESS127_LOW,MAC Address127 Low Register" tree.end tree.end width 42. tree "DMA Registers" group.long 0x1000++0x0B line.long 0x00 "BUS_MODE,Bus Mode Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " RIB ,Rebuild INCRx Burst" "No rebuild,Rebuild" bitfld.long 0x00 28.--29. " PRWG ,Channel Priority Weights" "1,2,3,4" bitfld.long 0x00 27. " TXPR ,Transmit Priority" "Below DMA,Above DMA" textline " " bitfld.long 0x00 26. " MB ,Mixed Bursts" "Disabled,Enabled" textline " " endif bitfld.long 0x00 25. " AAL ,Address Aligned Beats" "Disabled,Enabled" bitfld.long 0x00 24. " 8XPBL ,8xPBL Mode" "Disabled,Enabled" bitfld.long 0x00 23. " USP ,Use Seperate PBL" "Disabled,Enabled" textline " " bitfld.long 0x00 17.--22. " RPBL ,Rx DMA PBL" ",1,2,,4,,,,8,,,,,,,,16,,,,,,,,,,,,,,,,32,?..." bitfld.long 0x00 16. " FB ,Fixed Burst" "Single or Increment,Fixed" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 14.--15. " PR ,Priority Ratio" "1 to 1,2 to 1,3 to 1,4 to 1" textline " " endif bitfld.long 0x00 8.--13. " PBL ,Programmable Burst Length" ",1,2,,4,,,,8,,,,,,,,16,,,,,,,,,,,,,,,,32,?..." bitfld.long 0x00 7. " ATDS ,Alternate Descriptor Size" "16 bytes,32 bytes" bitfld.long 0x00 2.--6. " DSL ,Descriptor Skip Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 1. " DA ,DMA Arbitration Scheme" "Weighted round-robin,Fixed priority" textline " " endif bitfld.long 0x00 0. " SWR ,Software Reset" "No reset,Reset" line.long 0x04 "TRANSMIT_POLL_DEMAND,Transmit Poll Demand Register" line.long 0x08 "RECEIVE_POLL_DEMAND,Receive Poll Demand Register" if (d.l(ad:0xFF700000+0x1018)&0x02)==0x02 rgroup.long 0x100C++0x03 line.long 0x00 "RECEIVE_DESCRIPTOR_LIST_ADDRESS,Receive Descriptor List Address Register" hexmask.long 0x00 2.--31. 0x04 " RDESLA_32BIT ,Start of Receive List" else group.long 0x100C++0x03 line.long 0x00 "RECEIVE_DESCRIPTOR_LIST_ADDRESS,Receive Descriptor List Address Register" hexmask.long 0x00 2.--31. 0x04 " RDESLA_32BIT ,Start of Receive List" endif if (d.l(ad:0xFF700000+0x1018)&0x2000)==0x2000 rgroup.long 0x1010++0x03 line.long 0x00 "TRANSMIT_DESCRIPTOR_LIST_ADDRESS,Transmit Descriptor List Address Register" hexmask.long 0x00 2.--31. 0x04 " TDESLA_32BIT ,Start of Transmit List" else group.long 0x1010++0x03 line.long 0x00 "TRANSMIT_DESCRIPTOR_LIST_ADDRESS,Transmit Descriptor List Address Register" hexmask.long 0x00 2.--31. 0x04 " TDESLA_32BIT ,Start of Transmit List" endif if (((d.l(ad:0xFF700000+0x1014))&0x20000)==0x20000) group.long 0x1014++0x03 line.long 0x00 "STATUS,Status Register" rbitfld.long 0x00 30. " GLPII ,GMAC LPI Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 29. " TTI ,Timestamp Trigger Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 28. " GPI ,GMAC PMT Interrupt" "No interrupt,Interrupt" textline " " endif rbitfld.long 0x00 27. " GMI ,GMAC MMC Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 26. " GLI ,GMAC Line interface Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 25. " EB2 ,Error Bit 2" "Data buffer access,Descriptor access" textline " " rbitfld.long 0x00 24. " EB1 ,Error Bit 1" "Write transfer,Read transfer" rbitfld.long 0x00 23. " EB0 ,Error Bit 0" "Data transfer by RxDMA,Data transfer by TxDMA" rbitfld.long 0x00 20.--22. " TS ,Transmit Process State" "Stopped,Running: Fetching,Running: Waiting,Running: Reading,TIME_STAMP write,,Suspended,Running: Closing" textline " " rbitfld.long 0x00 17.--19. " RS ,Received Process State" "Stopped,Running: Fetching,,Running: Waiting,Suspended,Running: Closing,TIME_STAMP write,Running: Transferring" eventfld.long 0x00 16. " NIS ,Normal Interrupt Summary" "Low,High" eventfld.long 0x00 15. " AIS ,Abnormal Interrupt Summary" "Low,High" textline " " bitfld.long 0x00 14. " ERI ,Early Receive Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " FBI ,Fatal Bus Error Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 10. " ETI ,Early Transmit Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " RWT ,Receive Watchdog Timeout" "No timeout,Timeout" bitfld.long 0x00 8. " RPS ,Receive Process Stopped" "Not stopped,Stopped" bitfld.long 0x00 7. " RU ,Receive Buffer Unavailable" "Available,Unavailable" textline " " bitfld.long 0x00 6. " RI ,Receive Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 5. " UNF ,Transmit Underflow" "No underflow,Underflow" bitfld.long 0x00 4. " OVF ,Receive Overflow" "No overflow,Overflow" textline " " bitfld.long 0x00 3. " TJT ,Transmit Jabber Timeout" "No timeout,Timeout" bitfld.long 0x00 2. " TU ,Transmit Buffer Unavailable" "No,Yes" bitfld.long 0x00 1. " TPS ,Transmit Process Stopped" "Not stopped,Stopped" textline " " bitfld.long 0x00 0. " TI ,Transmit Interrupt" "No interrupt,Interrupt" else group.long 0x1014++0x03 line.long 0x00 "STATUS,Status Register" rbitfld.long 0x00 30. " GLPII ,GMAC LPI Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 29. " TTI ,Timestamp Trigger Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 28. " GPI ,GMAC PMT Interrupt" "No interrupt,Interrupt" textline " " endif rbitfld.long 0x00 27. " GMI ,GMAC MMC Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 26. " GLI ,GMAC Line interface Interrupt" "No interrupt,Interrupt" textline " " rbitfld.long 0x00 20.--22. " TS ,Transmit Process State" "Stopped,Running: Fetching,Running: Waiting,Running: Reading,TIME_STAMP write,,Suspended: Transmit,Running: Closing" textline " " rbitfld.long 0x00 17.--19. " RS ,Received Process State" "Stopped,Running: Fetching,,Running: Waiting,Suspended: Receive,Running: Closing,TIME_STAMP write,Running: Transferring" eventfld.long 0x00 16. " NIS ,Normal Interrupt Summary" "Low,High" eventfld.long 0x00 15. " AIS ,Abnormal Interrupt Summary" "Low,High" textline " " bitfld.long 0x00 14. " ERI ,Early Receive Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " FBI ,Fatal Bus Error Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 10. " ETI ,Early Transmit Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " RWT ,Receive Watchdog Timeout" "No timeout,Timeout" bitfld.long 0x00 8. " RPS ,Receive Process Stopped" "Not stopped,Stopped" bitfld.long 0x00 7. " RU ,Receive Buffer Unavailable" "Available,Unavailable" textline " " bitfld.long 0x00 6. " RI ,Receive Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 5. " UNF ,Transmit Underflow" "No underflow,Underflow" bitfld.long 0x00 4. " OVF ,Receive Overflow" "No overflow,Overflow" textline " " bitfld.long 0x00 3. " TJT ,Transmit Jabber Timeout" "No timeout,Timeout" bitfld.long 0x00 2. " TU ,Transmit Buffer Unavailable" "No,Yes" bitfld.long 0x00 1. " TPS ,Transmit Process Stopped" "Not stopped,Stopped" textline " " bitfld.long 0x00 0. " TI ,Transmit Interrupt" "No interrupt,Interrupt" endif group.long 0x1018++0x07 line.long 0x00 "OPERATION_MODE,Operation Mode Register" bitfld.long 0x00 26. " DT ,Disable Dropping of TCP/IP Checksum Error Frames" "No,Yes" bitfld.long 0x00 25. " RSF ,Read Rx FIFO only after complete frame" "Disabled,Enabled" bitfld.long 0x00 24. " DFF ,Disable Flushing of Received Frames" "No,Yes" textline " " bitfld.long 0x00 21. " TSF ,Transmit Store and Forward" "Disabled,Enabled" bitfld.long 0x00 20. " FTF ,Flush Transmit FIFO" "Not flushed,Flushed" textline " " bitfld.long 0x00 14.--16. " TTC ,Transmit Threshold Control" "64,128,192,256,40,32,24,16" bitfld.long 0x00 13. " ST ,Start Transmission Command" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 11.--12. 22. " RFD ,MSB of Threshold for Deactivating Flow Control" "FULL - 1KB,FULL - 2KB,FULL - 3KB,FULL - 4KB,FULL - 5KB,FULL - 6KB,FULL - 7KB,?..." rbitfld.long 0x00 9.--10. 23. " RFA ,MSB of Threshold for Activating Flow Control" "FULL - 1KB,FULL - 2KB,FULL - 3KB,FULL - 4KB,FULL - 5KB,FULL - 6KB,FULL - 7KB,?..." textline " " else bitfld.long 0x00 11.--12. " RFD ,MSB of Threshold for Deactivating Flow Control" "FULL - 1KB,FULL - 2KB,FULL - 3KB,FULL - 4KB" bitfld.long 0x00 9.--10. " RFA ,MSB of Threshold for Activating Flow Control" "FULL - 1KB,FULL - 2KB,FULL - 3KB,FULL - 4KB" textline " " bitfld.long 0x00 8. " EFC ,Enable HW Flow Control" "Disabled,Enabled" textline " " endif bitfld.long 0x00 7. " FEF ,Forward Error Frames" "Disabled,Enabled" bitfld.long 0x00 6. " FUF ,Forward Undersized Good Frames" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " DGF ,Drop Giant Frames" "Disabled,Enabled" textline " " endif bitfld.long 0x00 3.--4. " RTC ,Receive Threshold Control" "64,32,96,128" bitfld.long 0x00 2. " OSF ,Operate on Second Frame" "Disabled,Enabled" bitfld.long 0x00 1. " SR ,Start or Stop Receive" "Stopped,Started" line.long 0x04 "INTERRUPT_ENABLE,Interrupt Enable Register" bitfld.long 0x04 16. " NIE ,Normal Interrupt Summary Enable" "Disabled,Enabled" bitfld.long 0x04 15. " AIE ,Abnormal Interrupt Summary Enable" "Disabled,Enabled" bitfld.long 0x04 14. " ERE ,Early Receive Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 13. " FBE ,Fatal Bus Error Enable" "Disabled,Enabled" bitfld.long 0x04 10. " ETE ,Early Transmit Interrupt Enable" "Disabled,Enabled" bitfld.long 0x04 9. " RWE ,Receive Watchdog Timeout Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 8. " RSE ,Receive Stopped Enable" "Disabled,Enabled" bitfld.long 0x04 7. " RUE ,Receive Buffer Unavailable Enable" "Disabled,Enabled" bitfld.long 0x04 6. " RIE ,Receive Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 5. " UNE ,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x04 4. " OVE ,Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x04 3. " TJE ,Transmit Jabber Timeout Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 2. " TUE ,Transmit Buffer Unavailable Enable" "Disabled,Enabled" bitfld.long 0x04 1. " TSE ,Transmit Stopped Enable" "Disabled,Enabled" bitfld.long 0x04 0. " TIE ,Transmit Interrupt Enable" "Disabled,Enabled" rgroup.long 0x1020++0x03 line.long 0x00 "MISSED_FRAME_AND_BUFFER_OVERFLOW_COUNTER,Missed Frame and Buffer Overflow Counter Register" bitfld.long 0x00 28. " OVFCNTOVF ,Overflow bit for FIFO Overflow Counter" "Not overflowed,Overflowed" hexmask.long.word 0x00 17.--27. 1. " OVFFRMCNT ,Number of frames missed by the application" textline " " bitfld.long 0x00 16. " MISCNTOVF ,Overflow bit for Missed Frame Counter" "Not overflowed,Overflowed" hexmask.long.word 0x00 0.--15. 1. " MISFRMCNT ,Number of frames missed by the controller" group.long 0x1024++0x07 line.long 0x00 "RECEIVE_INTERRUPT_WATCHDOG_TIMER,Receive Interrupt Watchdog Timer Register" hexmask.long.byte 0x00 0.--7. 1. " RIWT ,RI Watchdog Timer Count" line.long 0x04 "AXI_BUS_MODE, AXI Bus Mode Register" bitfld.long 0x04 31. " EN_LPI ,Enable Low Power Interface" "Disabled,Enabled" bitfld.long 0x04 30. " LPI_XIT_FRM ,Exit LPI Mode with Magic Packet" "Disabled,Enabled" bitfld.long 0x04 20.--23. " WR_OSR_LMT ,AXI Maximum Write OutStanding Request Limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x04 16.--19. " RD_OSR_LMT ,AXI Maximum Read OutStanding Request Limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 13. " ONEKBBE ,1 KB Boundary Crossing Enable for the GMAC-AXI Master" "Disabled,Enabled" rbitfld.long 0x04 12. " AXI_AAL ,Address-Aligned burst transfers" "Disabled,Enabled" textline " " bitfld.long 0x04 3. " BLEN16 ,AXI Burst Length 16" "Disabled,Enabled" bitfld.long 0x04 2. " BLEN8 ,AXI Burst Length 8" "Disabled,Enabled" bitfld.long 0x04 1. " BLEN4 ,AXI Burst Length 4" "Disabled,Enabled" textline " " rbitfld.long 0x04 0. " UNDEF ,AXI Undefined Burst Length" "Disabled,Enabled" rgroup.long 0x102C++0x03 line.long 0x00 "AHB_OR_AXI_STATUS,AHB or AXI Status Register" bitfld.long 0x00 1. " AXIRDSTS ,AXI Master Read Channel Status" "Not activated,Activated" bitfld.long 0x00 0. " AXWHSTS ,AXI Master Write Channel or AHB Master Status" "Not activated,Activated" rgroup.long 0x1048++0x13 line.long 0x00 "CURRENT_HOST_TRANSMIT_DESCRIPTOR,Current Host Transmit Descriptor Register" line.long 0x04 "CURRENT_HOST_RECEIVE_DESCRIPTOR,Current Host Receive Descriptor Register" line.long 0x08 "CURRENT_HOST_TRANSMIT_BUFFER_ADDRESS,Current Host Transmit Buffer Address Register" line.long 0x0C "CURRENT_HOST_RECEIVE_BUFFER_ADDRESS,Current Host Receive Buffer Address Register" line.long 0x10 "HW_FEATURE,HW Feature Register" bitfld.long 0x10 28.--30. " ACTPHYIF ,Active or Selected PHY interface" "GMII or MII,RGMII,SGMII,TBI,RMII,RTBI,SMII,RevMII" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x10 27. " SAVLANINS ,Source Address or VLAN Insertion" "Disabled,Enabled" bitfld.long 0x10 26. " FLEXIPPSEN ,Flexible Pulse-Per-Second Output" "Disabled,Enabled" bitfld.long 0x10 25. " INTTSEN ,Timestamping with Internal System Time" "Disabled,Enabled" textline " " endif bitfld.long 0x10 24. " ENHDESSEL ,Enhanced Descriptor Select" "Disabled,Enabled" bitfld.long 0x10 22.--23. " TXCHCNT ,Number of additional Tx channels" "0,1,2,3" textline " " bitfld.long 0x10 20.--21. " RXCHCNT ,Number of additional Rx channels" "0,1,2,3" bitfld.long 0x10 19. " RXFIFOSIZE ,Rx FIFO > 2,048 Bytes" "Disabled,Enabled" bitfld.long 0x10 18. " RXTYP2COE ,Rx Type 2 Checksum Offload" "Disabled,Enabled" textline " " bitfld.long 0x10 17. " RXTYP1COE ,Rx Type 1 Checksum Offload" "Disabled,Enabled" bitfld.long 0x10 16. " TXCOESEL ,Checksum Offload in Tx" "Disabled,Enabled" bitfld.long 0x10 15. " AVSEL ,AV Feature" "Disabled,Enabled" textline " " bitfld.long 0x10 14. " EEESEL ,Energy Efficient Ethernet" "Disabled,Enabled" bitfld.long 0x10 13. " TSVER2SEL ,IEEE 1588-2008 Advanced Timestamp" "Disabled,Enabled" bitfld.long 0x10 12. " TSVER1SEL ,Only IEEE 1588-2002 Timestamp" "Disabled,Enabled" textline " " bitfld.long 0x10 11. " MMCSEL ,RMON Module" "Disabled,Enabled" bitfld.long 0x10 10. " MGKSEL ,PMT Magic Packet" "Disabled,Enabled" textline " " bitfld.long 0x10 9. " RWKSEL ,PMT Remote Wakeup" "Disabled,Enabled" bitfld.long 0x10 8. " SMASEL ,SMA (MDIO) Interface" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x10 7. " L3L4FLTREN ,Layer 3 and Layer 4 Filter Feature" "Disabled,Enabled" textline " " endif bitfld.long 0x10 6. " PCSSEL ,PCS registers" "Disabled,Enabled" bitfld.long 0x10 5. " ADDMACADRSEL ,Multiple MAC Address Registers" "Disabled,Enabled" bitfld.long 0x10 4. " HASHSEL ,HASH Filter" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x10 3. " EXTHASHEN ,Expanded DA Hash Filter" "Disabled,Enabled" textline " " endif bitfld.long 0x10 2. " HDSEL ,Half-Duplex support" "Disabled,Enabled" bitfld.long 0x10 1. " GMIISEL ,1000 Mbps support" "Disabled,Enabled" bitfld.long 0x10 0. " MIISEL ,10 or 100 Mbps support" "Disabled,Enabled" tree.end width 0x0B tree.end tree "EMAC1" base ad:0xFF702000 width 19. tree "GMAC registers" group.long 0x00++0x07 line.long 0x00 "MAC_CONFIGURATION,MAC Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 30. " SARC[2] ,Source Address Insertion or Replacement Control - MAC address register select" "0,1" bitfld.long 0x00 28.--29. " SARC[1:0] ,Source Address Insertion or Replacement Control" "mti_sa_ctrl_i and ati_sa_ctrl_i,mti_sa_ctrl_i and ati_sa_ctrl_i,Insert MAC address,Replace MAC address" textline " " endif bitfld.long 0x00 27. " TWOKPE ,IEEE 802.3as support for 2K packets Enable" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 26. " SFTERR ,SMII Force Transmit Error" "Not forced,Forced" textline " " endif bitfld.long 0x00 25. " CST ,CRC Stripping of Type Frames" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 24. " TC ,Transmit Configuration in RGMII/SGMII/SMII" "Disabled,Enabled" textline " " else bitfld.long 0x00 24. " TC ,Transmit Configuration in RGMII/SGMII/SMII" "Disabled,Enabled" textline " " endif bitfld.long 0x00 23. " WD ,Watchdog Disable" "No,Yes" textline " " bitfld.long 0x00 22. " JD ,Jabber Disable" "No,Yes" bitfld.long 0x00 21. " BE ,Frame Burst Enable" "Disabled,Enabled" bitfld.long 0x00 20. " JE ,Jumbo Frame Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 17.--19. " IFG ,Inter-Frame Gap" "96bit,88bit,80bit,72bit,64bit,56bit,48bit,40bit" bitfld.long 0x00 16. " DCRS ,Disable Carrier Sense During Transmission" "No,Yes" bitfld.long 0x00 15. " PS ,Port Select" "GMII,MII" textline " " bitfld.long 0x00 14. " FES ,Speed" "10Mbps,100Mbps" bitfld.long 0x00 13. " DO ,Disable Receive Own" "No,Yes" bitfld.long 0x00 12. " LM ,Loopback Mode" "Disabled,Enabled" textline " " bitfld.long 0x00 11. " DM ,Full Duplex Mode" "Disabled,Enabled" bitfld.long 0x00 10. " IPC ,Checksum Offload" "Disabled,Enabled" bitfld.long 0x00 9. " DR ,Disable Retry" "No,Yes" textline " " bitfld.long 0x00 8. " LUD ,Link Up or Down" "Down,Up" bitfld.long 0x00 7. " ACS ,Automatic Pad or CRC Stripping" "Disabled,Enabled" bitfld.long 0x00 5.--6. " BL ,Back-Off Limit" "10,8,4,1" textline " " bitfld.long 0x00 4. " DC ,Deferral Check" "Disabled,Enabled" bitfld.long 0x00 3. " TE ,Transmitter Enable" "Disable,Enable" bitfld.long 0x00 2. " RE ,Receiver Enable" "Disable,Enable" sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--1. " PRELEN ,Preamble Length for Transmit Frames" "7 bytes,5 bytes,3 bytes,1 byte" else textline " " bitfld.long 0x00 0.--1. " PRELEN ,Preamble Length for Transmit Frames" "7 bytes,5 bytes,3 bytes,?..." endif line.long 0x04 "MAC_FRAME_FILTER,MAC Frame Filter" bitfld.long 0x04 31. " RA ,Receive All" "Disabled,Enabled" bitfld.long 0x04 21. " DNTU ,Drop non-TCP/UDP over IP Frames" "Not dropped,Dropped" textline " " bitfld.long 0x04 20. " IPFE ,Layer 3 and Layer 4 Filter Enable" "Disabled,Enabled" bitfld.long 0x04 16. " VTFE ,VLAN Tag Filter Enable" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x04 10. " HPF ,Hash or Perfect Filter" "Disabled,Enabled" textline " " else bitfld.long 0x04 10. " HPF ,Hash or Perfect Filter" "Disabled,Enabled" textline " " endif bitfld.long 0x04 9. " SAF ,Source Address Filter Enable" "Disabled,Enabled" bitfld.long 0x04 8. " SAIF ,SA Inverse Filtering" "Disabled,Enabled" textline " " bitfld.long 0x04 6.--7. " PCF ,Pass Control Frames" "Filters,Forwards w/o PAUSE,Forwards all,Forwards passed" bitfld.long 0x04 5. " DBF ,Disable Broadcast Frames" "No,Yes" textline " " bitfld.long 0x04 4. " PM ,Pass All Multicast" "Disabled,Enabled" bitfld.long 0x04 3. " DAIF ,DA Inverse Filtering" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x04 2. " HMC ,Hash Multicast" "Compare,Hash table" rbitfld.long 0x04 1. " HUC ,Hash Unicast" "Hash table,Compare" textline " " else bitfld.long 0x04 2. " HMC ,Hash Multicast" "Compare,Hash table" bitfld.long 0x04 1. " HUC ,Hash Unicast" "Compare,Hash table" textline " " endif bitfld.long 0x04 0. " PR ,Promiscuous Mode" "Disabled,Enabled" group.long 0x10++0x0F line.long 0x00 "GMII_ADDRESS,GMII Address Register" bitfld.long 0x00 11.--15. " PA ,Physical Layer Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6.--10. " GR ,GMII Register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 2.--5. " CR ,CSR Clock Range" "Div by 42,Div by 62,Div by 16,Div by 26,Div by 102,Div by 124,,,Div by 4,Div by 6,Div by 8,Div by 10,Div by 12,Div by 14,Div by 16,Div by 18" textline " " sif cpu()=="CYCLONEVSOC" bitfld.long 0x00 1. " GW ,GMII Write" "Read,Write" else bitfld.long 0x00 1. " GW ,GMII Write" "Write,Read" endif bitfld.long 0x00 0. " GB ,GMII Busy" "Not busy,Busy" line.long 0x04 "GMII_DATA,GMII Data Register" hexmask.long.word 0x04 0.--15. 1. " GD ,GMII Data" line.long 0x08 "FLOW_CONTROL,Flow Control Register" hexmask.long.word 0x08 16.--31. 1. " PT ,Pause Time" bitfld.long 0x08 7. " DZPQ ,Disable Zero-Quanta Pause" "No,Yes" bitfld.long 0x08 4.--5. " PLT ,Pause Low Threshold" "4 slot,28 slot,144 slot,256 slot" textline " " bitfld.long 0x08 3. " UP ,Unicast Pause Frame Detect" "MCA,MCA & UCA" bitfld.long 0x08 2. " RFE ,Receive Flow Control Enable" "Disabled,Enabled" bitfld.long 0x08 1. " TFE ,Transmit Flow Control Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 0. " FCA_BPA ,Flow Control Busy or Backpressure Activate" "Not activated,Activated" line.long 0x0C "VLAN_TAG,VLAN Tag Register" sif cpu()=="ARRIA10SOC" rbitfld.long 0x0C 19. " VTHM ,VLAN Tag Hash Table Match Enable" "Disabled,Enabled" textline " " else bitfld.long 0x0C 19. " VTHM ,VLAN Tag Hash Table Match Enable" "Disabled,Enabled" textline " " endif bitfld.long 0x0C 18. " ESVL ,Enable S-VLAN" "Disabled,Enabled" bitfld.long 0x0C 17. " VTIM ,VLAN Tag Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x0C 16. " ETV ,Enable 12-Bit VLAN Tag Comparison" "Disabled,Enabled" textline " " bitfld.long 0x0C 13.--15. " VL_UP ,User Priority" "0,1,2,3,4,5,6,7" bitfld.long 0x0C 12. " VL_IND ,Canonical Format Indicator (CFI) or Drop Eligible Indicator (DEI)" "CFI,DEI" hexmask.long.word 0x0C 0.--11. 1. " VID ,VLAN Identifier field" rgroup.long 0x20++0x07 line.long 0x00 "VERSION,Version Register" hexmask.long.byte 0x00 8.--15. 1. " USERVER ,User-defined Version" hexmask.long.byte 0x00 0.--7. 1. " SNPSVER ,Synopsys-defined Version" line.long 0x04 "DEBUG,Debug Register" bitfld.long 0x04 25. " TXSTSFSTS ,MTL TxStatus FIFO Full Status" "Not full,Full" bitfld.long 0x04 24. " TXFSTS ,MTL Tx FIFO Not Empty Status" "Empty,Not empty" bitfld.long 0x04 22. " TWCSTS ,MTL Tx FIFO Write Controller Active Status" "Not activated,Activated" textline " " bitfld.long 0x04 20.--21. " TRCSTS ,Tx FIFO Read Controller Status" "IDLE,READ,Waiting,Writing" bitfld.long 0x04 19. " TXPAUSED ,MAC transmitter in PAUSE" "Disabled,Enabled" bitfld.long 0x04 17.--18. " TFCSTS ,MAC Transmit Frame Controller Status" "IDLE,Waiting,Tx Pause,Tx Input Frame" textline " " bitfld.long 0x04 16. " TPESTS ,MAC GMII or MII Transmit Protocol Engine Status" "Disabled,Enabled" bitfld.long 0x04 8.--9. " RXFSTS ,MTL Rx FIFO Fill-level Status" "Empty,Below threshold,Above threshold,Full" bitfld.long 0x04 5.--6. " RRCSTS ,MTL Rx FIFO Read Controller State" "IDLE,Reading data,Reading status,Flushing" textline " " bitfld.long 0x04 4. " RWCSTS ,MTL Rx FIFO Write Controller Active Status" "Not activated,Activated" bitfld.long 0x04 1.--2. " RFCFCSTS ,MAC Receive Frame Controller FIFO Status" "Disabled,Enabled,?..." bitfld.long 0x04 0. " RPESTS ,MAC GMII or MII Receive Protocol Engine Status" "Idle,Activated" width 29. hgroup.long 0x30++0x03 hide.long 0x00 "LPI_CONTROL_STATUS,LPI Control and Status Register" in group.long 0x34++0x03 line.long 0x00 "LPI_TIMERS_CONTROL,LPI Timers Control Register" hexmask.long.word 0x00 16.--25. 1. " LST ,LPI LS Timer" hexmask.long.word 0x00 0.--15. 1. " TWT ,LPI TW Timer" rgroup.long 0x38++0x03 line.long 0x00 "INTERRUPT_STATUS,Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 11. " GPIIS ,GPI Interrupt Status" "No interrupt,Interrupt" textline " " endif bitfld.long 0x00 10. " LPIIS ,LPI Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " TSIS ,Timestamp Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 7. " MMCRXIPIS ,MMC Receive Checksum Offload Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 6. " MMCTXIS ,MMC Transmit Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 5. " MMCRXIS ,MMC Receive Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 4. " MMCIS ,MMC Interrupt Status" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 3. " PMTIS ,PMT Interrupt Status" "No interrupt,Interrupt" textline " " endif bitfld.long 0x00 2. " PCSANCIS ,PCS Auto-Negotiation Complete" "No interrupt,Interrupt" bitfld.long 0x00 1. " PCSLCHGIS ,PCS Link Status Changed" "No interrupt,Interrupt" bitfld.long 0x00 0. " RGSMIIIS ,RGMII or SMII Interrupt Status" "No interrupt,Interrupt" group.long 0x3C++0x03 line.long 0x00 "INTERRUPT_MASK,Interrupt Mask Register" bitfld.long 0x00 10. " LPIIM ,LPI Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 9. " TSIM ,Timestamp Interrupt Mask" "Not masked,Masked" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 3. " PMTIM ,PMT Interrupt Mask" "Not masked,Masked" textline " " endif bitfld.long 0x00 2. " PCSANCIM ,PCS AN Completion Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 1. " PCSLCHGIM ,PCS Link Status Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 0. " RGSMIIIM ,RGSMIIIM" "Not masked,Masked" width 20. tree "MAC Address 0 - 15 Registers" group.long 0x40++0x07F line.long 0x00 "MAC_ADDRESS0_HIGH,MAC Address0 High Register" rbitfld.long 0x00 31. " AE ,Address Enable" ",Enabled" hexmask.long.word 0x00 0.--15. 1. " ADDRHI ,MAC Address 0" line.long 0x04 "MAC_ADDRESS0_LOW,MAC Address$2 Low Register" line.long 0x8 "MAC_ADDRESS1_HIGH,MAC Address1 High Register" bitfld.long 0x8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x8 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x8 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x8 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x8 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x8 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x8 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x8 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x8 0.--15. 1. " ADDRHI ,MAC Address1" line.long (0x8+0x04) "MAC_ADDRESS1_LOW,MAC Address1 Low Register" line.long 0x10 "MAC_ADDRESS2_HIGH,MAC Address2 High Register" bitfld.long 0x10 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x10 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x10 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x10 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x10 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x10 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x10 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x10 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x10 0.--15. 1. " ADDRHI ,MAC Address2" line.long (0x10+0x04) "MAC_ADDRESS2_LOW,MAC Address2 Low Register" line.long 0x18 "MAC_ADDRESS3_HIGH,MAC Address3 High Register" bitfld.long 0x18 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x18 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x18 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x18 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x18 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x18 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x18 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x18 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x18 0.--15. 1. " ADDRHI ,MAC Address3" line.long (0x18+0x04) "MAC_ADDRESS3_LOW,MAC Address3 Low Register" line.long 0x20 "MAC_ADDRESS4_HIGH,MAC Address4 High Register" bitfld.long 0x20 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x20 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x20 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x20 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x20 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x20 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x20 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x20 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x20 0.--15. 1. " ADDRHI ,MAC Address4" line.long (0x20+0x04) "MAC_ADDRESS4_LOW,MAC Address4 Low Register" line.long 0x28 "MAC_ADDRESS5_HIGH,MAC Address5 High Register" bitfld.long 0x28 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x28 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x28 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x28 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x28 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x28 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x28 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x28 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x28 0.--15. 1. " ADDRHI ,MAC Address5" line.long (0x28+0x04) "MAC_ADDRESS5_LOW,MAC Address5 Low Register" line.long 0x30 "MAC_ADDRESS6_HIGH,MAC Address6 High Register" bitfld.long 0x30 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x30 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x30 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x30 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x30 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x30 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x30 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x30 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x30 0.--15. 1. " ADDRHI ,MAC Address6" line.long (0x30+0x04) "MAC_ADDRESS6_LOW,MAC Address6 Low Register" line.long 0x38 "MAC_ADDRESS7_HIGH,MAC Address7 High Register" bitfld.long 0x38 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x38 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x38 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x38 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x38 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x38 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x38 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x38 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x38 0.--15. 1. " ADDRHI ,MAC Address7" line.long (0x38+0x04) "MAC_ADDRESS7_LOW,MAC Address7 Low Register" line.long 0x40 "MAC_ADDRESS8_HIGH,MAC Address8 High Register" bitfld.long 0x40 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x40 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x40 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x40 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x40 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x40 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x40 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x40 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x40 0.--15. 1. " ADDRHI ,MAC Address8" line.long (0x40+0x04) "MAC_ADDRESS8_LOW,MAC Address8 Low Register" line.long 0x48 "MAC_ADDRESS9_HIGH,MAC Address9 High Register" bitfld.long 0x48 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x48 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x48 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x48 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x48 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x48 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x48 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x48 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x48 0.--15. 1. " ADDRHI ,MAC Address9" line.long (0x48+0x04) "MAC_ADDRESS9_LOW,MAC Address9 Low Register" line.long 0x50 "MAC_ADDRESS10_HIGH,MAC Address10 High Register" bitfld.long 0x50 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x50 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x50 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x50 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x50 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x50 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x50 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x50 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x50 0.--15. 1. " ADDRHI ,MAC Address10" line.long (0x50+0x04) "MAC_ADDRESS10_LOW,MAC Address10 Low Register" line.long 0x58 "MAC_ADDRESS11_HIGH,MAC Address11 High Register" bitfld.long 0x58 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x58 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x58 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x58 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x58 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x58 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x58 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x58 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x58 0.--15. 1. " ADDRHI ,MAC Address11" line.long (0x58+0x04) "MAC_ADDRESS11_LOW,MAC Address11 Low Register" line.long 0x60 "MAC_ADDRESS12_HIGH,MAC Address12 High Register" bitfld.long 0x60 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x60 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x60 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x60 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x60 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x60 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x60 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x60 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x60 0.--15. 1. " ADDRHI ,MAC Address12" line.long (0x60+0x04) "MAC_ADDRESS12_LOW,MAC Address12 Low Register" line.long 0x68 "MAC_ADDRESS13_HIGH,MAC Address13 High Register" bitfld.long 0x68 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x68 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x68 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x68 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x68 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x68 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x68 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x68 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x68 0.--15. 1. " ADDRHI ,MAC Address13" line.long (0x68+0x04) "MAC_ADDRESS13_LOW,MAC Address13 Low Register" line.long 0x70 "MAC_ADDRESS14_HIGH,MAC Address14 High Register" bitfld.long 0x70 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x70 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x70 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x70 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x70 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x70 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x70 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x70 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x70 0.--15. 1. " ADDRHI ,MAC Address14" line.long (0x70+0x04) "MAC_ADDRESS14_LOW,MAC Address14 Low Register" line.long 0x78 "MAC_ADDRESS15_HIGH,MAC Address15 High Register" bitfld.long 0x78 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x78 30. " SA ,Source Address" "Disabled,Enabled" bitfld.long 0x78 29. " MBC[5] ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x78 28. " MBC[4] ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x78 27. " MBC[3] ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x78 26. " MBC[2] ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x78 25. " MBC[1] ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x78 24. " MBC[0] ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x78 0.--15. 1. " ADDRHI ,MAC Address15" line.long (0x78+0x04) "MAC_ADDRESS15_LOW,MAC Address15 Low Register" tree.end width 23. rgroup.long 0xD8++0x03 line.long 0x00 "SGMII_CONTROL_STATUS,SMII Status Register" bitfld.long 0x00 3. " LNKSTS ,Link Status" "Down,Up" bitfld.long 0x00 1.--2. " LNKSPEED ,Link Speed" "2.5MHz,25MHz,125MHz,?..." bitfld.long 0x00 0. " LNKMOD ,Link Mode" "Half-duplex,Full-duplex" sif cpu()=="ARRIA10SOC" group.long 0xDC++0x03 line.long 0x00 "WDOG_TIMEOUT,Watchdog Timeout Register" bitfld.long 0x00 16. " PWE ,Programmable Watchdog Enable" "Disabled,Enabled" hexmask.long.word 0x00 0.--13. 1. " WTO ,Watchdog Timeout" group.long 0xE0++0x03 line.long 0x00 "GENPIO,General Purpose I/O Register" bitfld.long 0x00 24. " GPIT ,GPI Type" "Latched-high,Latched-low" bitfld.long 0x00 16. " GPIE ,GPI Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 8. " GPO ,General Purpose Output" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " GPIS ,General Purpose Input Status" "Low,High" endif group.long 0x100++0x03 line.long 0x00 "MMC_CONTROL,MMC Control Register" bitfld.long 0x00 8. " UCDBC ,Update MMC Counters for Dropped Broadcast Frames" "Disabled,Enabled" bitfld.long 0x00 5. " CNTPRSTLVL ,Full-Half Preset" "Half,Full" bitfld.long 0x00 4. " CNTPRST ,Counters Preset" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " CNTFREEZ ,MMC Counter Freeze" "Disabled,Enabled" bitfld.long 0x00 2. " RSTONRD ,Reset on Read" "Disabled,Enabled" bitfld.long 0x00 1. " CNTSTOPRO ,Counters Stop Rollover" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " CNTRST ,Counters Reset" "Disabled,Enabled" rgroup.long 0x104++0x07 line.long 0x00 "MMC_RECEIVE_INTERRUPT,MMC Receive Interrupt Register" bitfld.long 0x00 25. " RXCTRLFIS ,MMC Receive Control Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 24. " RXRCVERRFIS ,MMC Receive Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 23. " RXWDOGFIS ,MMC Receive Watchdog Error Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 22. " RXVLANGBFIS ,MMC Receive VLAN Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 21. " RXFOVFIS ,MMC Receive FIFO Overflow Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 20. " RXPAUSFIS ,MMC Receive Pause Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 19. " RXORANGEFIS ,MMC Receive Out Of Range Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 18. " RXLENERFIS ,MMC Receive Length Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 17. " RXUCGFIS ,MMC Receive Unicast Good Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 16. " RX1024TMAXOCTGBFIS ,MMC Receive 1024 to Maximum Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 15. " RX512T1023OCTGBFIS ,MMC Receive 512 to 1023 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 14. " RX256T511OCTGBFIS ,MMC Receive 256 to 511 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 13. " RX128T255OCTGBFIS ,MMC Receive 128 to 255 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 12. " RX65T127OCTGBFIS ,MMC Receive 65 to 127 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 11. " RX64OCTGBFIS ,MMC Receive 64 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 10. " RXOSIZEGFIS ,MMC Receive Oversize Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 9. " RXUSIZEGFIS ,MMC Receive Undersize Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 8. " RXJABERFIS ,MMC Receive Jabber Error Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 7. " RXRUNTFIS ,MMC Receive Runt Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 6. " RXALGNERFIS ,MMC Receive Alignment Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 5. " RXCRCERFIS ,MMC Receive CRC Error Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 4. " RXMCGFIS ,MMC Receive Multicast Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 3. " RXBCGFIS ,MMC Receive Broadcast Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 2. " RXGOCTIS ,MMC Receive Good Octet Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x00 1. " RXGBOCTIS ,MMC Receive Good Bad Octet Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x00 0. " RXGBFRMIS ,MMC Receive Good Bad Frame Counter Interrupt Status" "Almost half,Almost full" line.long 0x04 "MMC_TRANSMIT_INTERRUPT,RMMC Transmit Interrupt Register" bitfld.long 0x04 25. " TXOSIZEGFIS ,MMC Transmit Oversize Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 24. " TXVLANGFIS ,MMC Transmit VLAN Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 23. " TXPAUSFIS ,MMC Transmit Pause Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 22. " TXEXDEFFIS ,MMC Transmit Excessive Deferral Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 21. " TXGFRMIS ,MMC Transmit Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 20. " TXGOCTIS ,MMC Transmit Good Octet Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 19. " TXCARERFIS ,MMC Transmit Carrier Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 18. " TXEXCOLFIS ,MMC Transmit Excessive Collision Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 17. " TXLATCOLFIS ,MMC Transmit Late Collision Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 16. " TXDEFFIS ,MMC Transmit Deferred Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 15. " TXMCOLGFIS ,MMC Transmit Multiple Collision Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 14. " TXSCOLGFIS ,MMC Transmit Single Collision Good Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 13. " TXUFLOWERFIS ,MMC Transmit Underflow Error Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 12. " TXBCGBFIS ,MMC Transmit Broadcast Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 11. " TXMCGBFIS ,MMC Transmit Multicast Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 10. " TXUCGBFIS ,MMC Transmit Unicast Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 9. " TX1024TMAXOCTGBFIS ,MMC Transmit 1024 to Maximum Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 8. " TX512T1023OCTGBFIS ,MMC Transmit 512 to 1023 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 7. " TX256T511OCTGBFIS ,MMC Transmit 256 to 511 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 6. " TX128T255OCTGBFIS ,MMC Transmit 128 to 255 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 5. " TX65T127OCTGBFIS ,MMC Transmit 65 to 127 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 4. " TX64OCTGBFIS ,MMC Transmit 64 Octet Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 3. " TXMCGFIS ,MMC Transmit Multicast Good Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 2. " TXBCGFIS ,MMC Transmit Broadcast Good Frame Counter Interrupt Status" "< half max,>= half max" textline " " bitfld.long 0x04 1. " TXGBFRMIS ,MMC Transmit Good Bad Frame Counter Interrupt Status" "< half max,>= half max" bitfld.long 0x04 0. " TXGBOCTIS ,MMC Transmit Good Bad Octet Counter Interrupt Status" "< half max,>= half max" width 36. group.long 0x10C++0x07 line.long 0x00 "MMC_RECEIVE_INTERRUPT_MASK,MMC Receive Interrupt Mask Register" bitfld.long 0x00 25. " RXCTRLFIM ,MMC Receive Control Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 24. " RXRCVERRFIM ,MMC Receive Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 23. " RXWDOGFIM ,MMC Receive Watchdog Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 22. " RXVLANGBFIM ,MMC Receive VLAN Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 21. " RXFOVFIM ,MMC Receive FIFO Overflow Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 20. " RXPAUSFIM ,MMC Receive Pause Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 19. " RXORANGEFIM ,MMC Receive Out Of Range Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 18. " RXLENERFIM ,MMC Receive Length Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 17. " RXUCGFIM ,MMC Receive Unicast Good Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 16. " RX1024TMAXOCTGBFIM ,MMC Receive 1024 to Maximum Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 15. " RX512T1023OCTGBFIM ,MMC Receive 512 to 1023 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 14. " RX256T511OCTGBFIM ,MMC Receive 256 to 511 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 13. " RX128T255OCTGBFIM ,MMC Receive 128 to 255 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 12. " RX65T127OCTGBFIM ,MMC Receive 65 to 127 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 11. " RX64OCTGBFIM ,MMC Receive 64 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 10. " RXOSIZEGFIM ,MMC Receive Oversize Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 9. " RXUSIZEGFIM ,MMC Receive Undersize Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 8. " RXJABERFIM ,MMC Receive Jabber Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 7. " RXRUNTFIM ,MMC Receive Runt Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 6. " RXALGNERFIM ,MMC Receive Alignment Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 5. " RXCRCERFIM ,MMC Receive CRC Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 4. " RXMCGFIM ,MMC Receive Multicast Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 3. " RXBCGFIM ,MMC Receive Broadcast Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 2. " RXGOCTIM ,MMC Receive Good Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 1. " RXGBOCTIM ,MMC Receive Good Bad Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 0. " RXGBFRMIM ,MMC Receive Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" line.long 0x04 "MMC_TRANSMIT_INTERRUPT_MASK,MMC Transmit Interrupt Mask Register" bitfld.long 0x04 25. " TXOSIZEGFIM ,MMC Transmit Oversize Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 24. " TXVLANGFIM ,MMC Transmit VLAN Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 23. " TXPAUSFIM ,MMC Transmit Pause Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 22. " TXEXDEFFIM ,MMC Transmit Excessive Deferral Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 21. " TXGFRMIM ,MMC Transmit Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 20. " TXGOCTIM ,MMC Transmit Good Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 19. " TXCARERFIM ,MMC Transmit Carrier Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 18. " TXEXCOLFIM ,MMC Transmit Excessive Collision Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 17. " TXLATCOLFIM ,MMC Transmit Late Collision Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 16. " TXDEFFIM ,MMC Transmit Deferred Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 15. " TXMCOLGFIM ,MMC Transmit Multiple Collision Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 14. " TXSCOLGFIM ,MMC Transmit Single Collision Good Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 13. " TXUFLOWERFIM ,MMC Transmit Underflow Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 12. " TXBCGBFIM ,MMC Transmit Broadcast Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 11. " TXMCGBFIM ,MMC Transmit Multicast Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 10. " TXUCGBFIM ,MMC Transmit Unicast Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 9. " TX1024TMAXOCTGBFIM ,MMC Transmit 1024 to Maximum Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 8. " TX512T1023OCTGBFIM ,MMC Transmit 512 to 1023 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 7. " TX256T511OCTGBFIM ,MMC Transmit 256 to 511 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 6. " TX128T255OCTGBFIM ,MMC Transmit 128 to 255 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 5. " TX65T127OCTGBFIM ,MMC Transmit 65 to 127 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 4. " TX64OCTGBFIM ,MMC Transmit 64 Octet Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 3. " TXMCGFIM ,MMC Transmit Multicast Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 2. " TXBCGFIM ,MMC Transmit Broadcast Good Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x04 1. " TXGBFRMIM ,MMC Transmit Good Bad Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x04 0. " TXGBOCTIM ,MMC Transmit Good Bad Octet Counter Interrupt Mask" "Not masked,Masked" rgroup.long 0x114++0x67 line.long 0x00 "TX_OCTET_COUNT_GOOD_BAD,Transmit Octet Count for Good and Bad Frames" line.long 0x04 "TX_FRAME_COUNT_GOOD_BAD,Transmit Frame Count for Good and Bad Frames" line.long 0x08 "TX_BROADCAST_FRAMES_GOOD,Transmit Frame Count for Good Broadcast Frames" line.long 0x0C "TX_MULTICAST_FRAMES_GOOD,Transmit Frame Count for Good Multicast Frames" line.long 0x10 "TX_64OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 64 Byte Frames" line.long 0x14 "TX_65TO127OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 65 to 127 Bytes Frames" line.long 0x18 "TX_128TO255OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 128 to 255 Bytes Frames" line.long 0x1C "TX_256TO511OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 256 to 511 Bytes Frames" line.long 0x20 "TX_512TO1023OCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 512 to 1023 Bytes Frames" line.long 0x24 "TX_1024TOMAXOCTETS_FRAMES_GOOD_BAD,Transmit Octet Count for Good and Bad 1024 to Maxsize Bytes Frames" line.long 0x28 "TX_UNICAST_FRAMES_GOOD_BAD,Transmit Frame Count for Good and Bad Unicast Frames" line.long 0x2C "TX_MULTICAST_FRAMES_GOOD_BAD,Transmit Frame Count for Good and Bad Multicast Frames" line.long 0x30 "TX_BROADCAST_FRAMES_GOOD_BAD,Transmit Frame Count for Good and Bad Broadcast Frames" line.long 0x34 "TX_UNDERFLOW_ERROR_FRAMES,Transmit Frame Count for Underflow Error Frames" line.long 0x38 "TX_SINGLE_COLLISION_GOOD_FRAMES,Transmit Frame Count for Frames Transmitted after Single Collision" line.long 0x3C "TX_MULTIPLE_COLLISION_GOOD_FRAMES,Transmit Frame Count for Frames Transmitted after Multiple Collision" line.long 0x40 "TX_DEFERRED_FRAMES,Transmit Frame Count for Deferred Frames" line.long 0x44 "TX_LATE_COLLISION_FRAMES,Transmit Frame Count for Late Collision Error Frames" line.long 0x48 "TX_EXCESSIVE_COLLISION_FRAMES,Transmit Frame Count for Excessive Collision Error Frames" line.long 0x4C "TX_CARRIER_ERROR_FRAMES,Transmit Frame Count for Carrier Sense Error Frames" line.long 0x50 "TX_OCTET_COUNT_GOOD,Transmit Octet Count for Good Frames" line.long 0x54 "TX_FRAME_COUNT_GOOD,Transmit Frame Count for Good Frames" line.long 0x58 "TX_EXCESSIVE_DEFERRAL_ERROR,Transmit Frame Count for Excessive Deferral Error Frames" line.long 0x5C "TX_PAUSE_FRAMES,Transmit Frame Count for Good PAUSE Frames" line.long 0x60 "TX_VLAN_FRAMES_GOOD,Transmit Frame Count for Good VLAN Frames" line.long 0x64 "TX_OVERSIZE_G,Number of good and bad frames received" rgroup.long 0x180++0x67 line.long 0x00 "RX_FRAMES_COUNT_GOOD_BAD,Receive Frame Count for Good and Bad Frames" line.long 0x04 "RX_OCTET_COUNT_GOOD_BAD,Receive Octet Count for Good and Bad Frames" line.long 0x08 "RX_OCTET_COUNT_GOOD,Receive Octet Count for Good Frames" line.long 0x0C "RX_BROADCAST_FRAMES_GOOD,Receive Frame Count for Good Broadcast Frames" line.long 0x10 "RX_MULTICAST_FRAMES_GOOD,Receive Frame Count for Good Multicast Frames" line.long 0x14 "RX_CRC_ERROR_FRAMES,Receive Frame Count for CRC Error Frames" line.long 0x18 "RX_ALIGNMENT_ERROR_FRAMES,Receive Frame Count for Alignment Error Frames" line.long 0x1C "RX_RUNT_ERROR_FRAMES,Receive Frame Count for Runt Error Frames" line.long 0x20 "RX_JABBER_ERROR_FRAMES,Receive Frame Count for Jabber Error Frames" line.long 0x24 "RX_UNDERSIZE_FRAMES_GOOD,Receive Frame Count for Undersize Frames" line.long 0x28 "RX_OVERSIZE_FRAMES_GOOD,Receive Frame Count for Oversize Frames" line.long 0x2C "RX_64OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 64 Byte Frames" line.long 0x30 "RX_65TO127OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 65 to 127 Bytes Frames" line.long 0x34 "RX_128TO255OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 128 to 255 Bytes Frames" line.long 0x38 "RX_256TO511OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 256 to 511 Bytes Frames" line.long 0x3C "RX_512TO1023OCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 512 to 1,023 Bytes Frames" line.long 0x40 "RX_1024TOMAXOCTETS_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad 1,024 to Maxsize Bytes Frames" line.long 0x44 "RX_UNICAST_FRAMES_GOOD,Receive Frame Count for Good Unicast Frames" line.long 0x48 "RX_LENGTH_ERROR_FRAMES,Receive Frame Count for Length Error Frames" line.long 0x4C "RX_OUT_OF_RANGE_TYPE_FRAMES,Receive Frame Count for Out of Range Frames" line.long 0x50 "RX_PAUSE_FRAMES,Receive Frame Count for PAUSE Frames" line.long 0x54 "RX_FIFO_OVERFLOW_FRAMES,Receive Frame Count for FIFO Overflow Frames" line.long 0x58 "RX_VLAN_FRAMES_GOOD_BAD,Receive Frame Count for Good and Bad VLAN Frames" line.long 0x5C "RX_WATCHDOG_ERROR_FRAMES,Receive Frame Count for Watchdog Error Frames" line.long 0x60 "RX_RECEIVE_ERROR_FRAMES,Receive Frame Count for Receive Error Frames" line.long 0x64 "RX_CTRLF_RAMES_G,Number of received good control frames" group.long 0x200++0x03 line.long 0x00 "MMC_IPC_RECEIVE_INTERRUPT_MASK,MMC Receive Checksum Offload Interrupt Mask Register" bitfld.long 0x00 29. " RXICMPEROIM ,MMC Receive ICMP Error Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 28. " RXICMPGOIM ,MMC Receive ICMP Good Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 27. " RXTCPEROIM ,MMC Receive TCP Error Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 26. " RXTCPGOIM ,MMC Receive TCP Good Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 25. " RXUDPEROIM ,MMC Receive UDP Error Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 24. " RXUDPGOIM ,MMC Receive UDP Good Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 23. " RXIPV6NOPAYOIM ,MMC Receive IPV6 No Payload Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 22. " RXIPV6HEROIM ,MMC Receive IPV6 Header Error Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 21. " RXIPV6GOIM ,MMC Receive IPV6 Good Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 20. " RXIPV4UDSBLOIM ,MMC Receive IPV4 UDP Checksum Disabled Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 19. " RXIPV4FRAGOIM ,MMC Receive IPV4 Fragmented Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 18. " RXIPV4NOPAYOIM ,MMC Receive IPV4 No Payload Octet Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 17. " RXIPV4HEROIM ,MMC Receive IPV4 Header Error Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 16. " RXIPV4GOIM ,MMC Receive IPV4 Good Octet Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 13. " RXICMPERFIM ,MMC Receive ICMP Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 12. " RXICMPGFIM ,MMC Receive ICMP Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 11. " RXTCPERFIM ,MMC Receive TCP Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 10. " RXTCPGFIM ,MMC Receive TCP Good Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 9. " RXUDPERFIM ,MMC Receive UDP Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 8. " RXUDPGFIM ,MMC Receive UDP Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 7. " RXIPV6NOPAYFIM ,MMC Receive IPV6 No Payload Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 6. " RXIPV6HERFIM ,MMC Receive IPV6 Header Error Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 5. " RXIPV6GFIM ,MMC Receive IPV6 Good Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 4. " RXIPV4UDSBLFIM ,MMC Receive IPV4 UDP Checksum Disabled Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 3. " RXIPV4FRAGFIM ,MMC Receive IPV4 Fragmented Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 2. " RXIPV4NOPAYFIM ,MMC Receive IPV4 No Payload Frame Counter Interrupt Mask" "Not masked,Masked" bitfld.long 0x00 1. " RXIPV4HERFIM ,MMC Receive IPV4 Header Error Frame Counter Interrupt Mask" "Not masked,Masked" textline " " bitfld.long 0x00 0. " RXIPV4GFIM ,MMC Receive IPV4 Good Frame Counter Interrupt Mask" "Not masked,Masked" rgroup.long 0x208++0x03 line.long 0x00 "MMC_IPC_RECEIVE_INTERRUPT,MMC Receive Checksum Offload Interrupt Register" bitfld.long 0x00 29. " RXICMPEROIS ,MMC Receive ICMP Error Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 28. " RXICMPGOIS ,MMC Receive ICMP Good Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 27. " RXTCPEROIS ,MMC Receive TCP Error Octet Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 26. " RXTCPGOIS ,MMC Receive TCP Good Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 25. " RXUDPEROIS ,MMC Receive UDP Error Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 24. " RXUDPGOIS ,MMC Receive UDP Good Octet Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 23. " RXIPV6NOPAYOIS ,MMC Receive IPV6 No Payload Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 22. " RXIPV6HEROIS ,MMC Receive IPV6 Header Error Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 21. " RXIPV6GOIS ,MMC Receive IPV6 Good Octet Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 20. " RXIPV4UDSBLOIS ,MMC Receive IPV4 UDP Checksum Disabled Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 19. " RXIPV4FRAGOIS ,MMC Receive IPV4 Fragmented Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 18. " RXIPV4NOPAYOIS ,MMC Receive IPV4 No Payload Octet Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 17. " RXIPV4HEROIS ,MMC Receive IPV4 Header Error Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 16. " RXIPV4GOIS ,MMC Receive IPV4 Good Octet Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 13. " RXICMPERFIS ,MMC Receive ICMP Error Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 12. " RXICMPGFIS ,MMC Receive ICMP Good Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 11. " RXTCPERFIS ,MMC Receive TCP Error Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 10. " RXTCPGFIS ,MMC Receive TCP Good Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " RXUDPERFIS ,MMC Receive UDP Error Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " RXUDPGFIS ,MMC Receive UDP Good Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 7. " RXIPV6NOPAYFIS ,MMC Receive IPV6 No Payload Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 6. " RXIPV6HERFIS ,MMC Receive IPV6 Header Error Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 5. " RXIPV6GFIS ,MMC Receive IPV6 Good Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 4. " RXIPV4UDSBLFIS ,MMC Receive IPV4 UDP Checksum Disabled Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " RXIPV4FRAGFIS ,MMC Receive IPV4 Fragmented Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 2. " RXIPV4NOPAYFIS ,MMC Receive IPV4 No Payload Frame Counter Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 1. " RXIPV4HERFIS ,MMC Receive IPV4 Header Error Frame Counter Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 0. " RXIPV4GFIS ,MMC Receive IPV4 Good Frame Counter Interrupt Status" "No interrupt,Interrupt" rgroup.long 0x210++0x037 line.long 0x00 "RXIPV4_GOOD_FRAMES,Receive IPV4 Good Frame Counter Register" line.long 0x04 "RXIPV4_HEADER_ERROR_FRAMES,Receive IPV4 Header Error Frame Counter Register" line.long 0x08 "RXIPV4_NO_PAYLOAD_FRAMES,Receive IPV4 No Payload Frame Counter Register" line.long 0x0C "RXIPV4_FRAGMENTED_FRAMES,Receive IPV4 Fragmented Frame Counter Register" line.long 0x10 "RXIPV4_UDP_CHECKSUM_DISABLED_FRAMES,Receive IPV4 UDP Checksum Disabled Frame Counter Register" line.long 0x14 "RXIPV6_GOOD_FRAMES,Receive IPV6 Good Frame Counter Register" line.long 0x18 "RXIPV6_HEADER_ERROR_FRAMES,Receive IPV6 Header Error Frame Counter Register" line.long 0x1C "RXIPV6_NO_PAYLOAD_FRAMES,Receive IPV6 No Payload Frame Counter Register" line.long 0x20 "RXUDP_GOOD_FRAMES,Receive UDP Good Frame Counter Register" line.long 0x24 "RXUDP_ERROR_FRAMES,Receive UDP Error Frame Counter Register" line.long 0x28 "RXTCP_GOOD_FRAMES,Receive TCP Good Frame Counter Register" line.long 0x2C "RXTCP_ERROR_FRAMES,Receive TCP Error Frame Counter Register" line.long 0x30 "RXICMP_GOOD_FRAMES,Receive ICMP Good Frame Counter Register" line.long 0x34 "RXICMP_ERROR_FRAMES,Receive ICMP Error Frame Counter Register" rgroup.long 0x250++0x037 line.long 0x00 "RXIPV4_GOOD_OCTETS,Receive IPV4 Good Octet Counter Register" line.long 0x04 "RXIPV4_HEADER_ERROR_OCTETS,Receive IPV4 Header Error Octet Counter Register" line.long 0x08 "RXIPV4_NO_PAYLOAD_OCTETS,Receive IPV4 No Payload Octet Counter Register" line.long 0x0C "RXIPV4_FRAGMENTED_OCTETS,Receive IPV4 Fragmented Octet Counter Register" line.long 0x10 "RXIPV4_UDP_CHECKSUM_DISABLE_OCTETS,Receive IPV4 Fragmented Octet Counter Register" line.long 0x14 "RXIPV6_GOOD_OCTETS,Receive IPV6 Good Octet Counter Register" line.long 0x18 "RXIPV6_HEADER_ERROR_OCTETS,Receive IPV6 Header Error Octet Counter Register" line.long 0x1C "RXIPV6_NO_PAYLOAD_OCTETS,Receive IPV6 No Payload Octet Counter Register" line.long 0x20 "RXUDP_GOOD_OCTETS,Receive UDP Good Octet Counter Register" line.long 0x24 "RXUDP_ERROR_OCTETS,Receive UDP Error Octet Counter Register" line.long 0x28 "RXTCP_GOOD_OCTETS,Receive TCP Good Octet Counter Register" line.long 0x2C "RXTCP_ERROR_OCTETS,Receive TCP Error Octet Counter Register" line.long 0x30 "RXICMP_GOOD_OCTETS,Receive ICMP Good Octet Counter Register" line.long 0x34 "RXICMP_ERROR_OCTETS,Receive ICMP Error Octet Counter Register" group.long 0x400++0x07 line.long 0x00 "L3_L4_CONTROL0,Layer 3 and Layer 4 Control Register 0" bitfld.long 0x00 21. " L4DPIM0 ,Layer 4 Destination Port Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 20. " L4DPM0 ,Layer 4 Destination Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 19. " L4SPIM0 ,Layer 4 Source Port Inverse Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " L4SPM0 ,Layer 4 Source Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 16. " L4PEN0 ,Layer 4 Protocol Enable" "Disabled,Enabled" bitfld.long 0x00 11.--15. " L3HDBM0 ,Layer 3 IP DA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 6.--10. " L3HSBM0 ,Layer 3 IP SA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM0 , Layer 3 IP DA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 4. " L3DAM0 ,Layer 3 IP DA Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " L3SAIM0 , Layer 3 IP SA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 2. " L3SAM0 ,Layer 3 IP SA Match Enable" "Disabled,Enabled" bitfld.long 0x00 0. " L3PEN0 , Layer 3 Protocol Enable" "Disabled,Enabled" line.long 0x04 "LAYER4_ADDRESS0,Layer 4 Address Register0" hexmask.long.word 0x04 16.--31. 1. " L4DP0 ,Layer 4 Destination Port Number Field" hexmask.long.word 0x04 0.--15. 1. " L4SP0 ,Layer 4 Source Port Number Field" group.long (0x400+0x10)++0x0F line.long 0x00 "LAYER3_ADDR0_REG0,Layer 3 Address 0 Register 0" line.long 0x04 "LAYER3_ADDR1_REG0,Layer 3 Address 1 Register 0" line.long 0x08 "LAYER3_ADDR2_REG0,Layer 3 Address 2 Register 0" line.long 0x0C "LAYER3_ADDR3_REG0,Layer 3 Address 3 Register 0" group.long 0x430++0x07 line.long 0x00 "L3_L4_CONTROL1,Layer 3 and Layer 4 Control Register 1" bitfld.long 0x00 21. " L4DPIM1 ,Layer 4 Destination Port Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 20. " L4DPM1 ,Layer 4 Destination Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 19. " L4SPIM1 ,Layer 4 Source Port Inverse Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " L4SPM1 ,Layer 4 Source Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 16. " L4PEN1 ,Layer 4 Protocol Enable" "Disabled,Enabled" bitfld.long 0x00 11.--15. " L3HDBM1 ,Layer 3 IP DA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 6.--10. " L3HSBM1 ,Layer 3 IP SA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM1 , Layer 3 IP DA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 4. " L3DAM1 ,Layer 3 IP DA Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " L3SAIM1 , Layer 3 IP SA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 2. " L3SAM1 ,Layer 3 IP SA Match Enable" "Disabled,Enabled" bitfld.long 0x00 0. " L3PEN1 , Layer 3 Protocol Enable" "Disabled,Enabled" line.long 0x04 "LAYER4_ADDRESS1,Layer 4 Address Register1" hexmask.long.word 0x04 16.--31. 1. " L4DP1 ,Layer 4 Destination Port Number Field" hexmask.long.word 0x04 0.--15. 1. " L4SP1 ,Layer 4 Source Port Number Field" group.long (0x430+0x10)++0x0F line.long 0x00 "LAYER3_ADDR0_REG1,Layer 3 Address 0 Register 1" line.long 0x04 "LAYER3_ADDR1_REG1,Layer 3 Address 1 Register 1" line.long 0x08 "LAYER3_ADDR2_REG1,Layer 3 Address 2 Register 1" line.long 0x0C "LAYER3_ADDR3_REG1,Layer 3 Address 3 Register 1" group.long 0x460++0x07 line.long 0x00 "L3_L4_CONTROL2,Layer 3 and Layer 4 Control Register 2" bitfld.long 0x00 21. " L4DPIM2 ,Layer 4 Destination Port Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 20. " L4DPM2 ,Layer 4 Destination Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 19. " L4SPIM2 ,Layer 4 Source Port Inverse Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " L4SPM2 ,Layer 4 Source Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 16. " L4PEN2 ,Layer 4 Protocol Enable" "Disabled,Enabled" bitfld.long 0x00 11.--15. " L3HDBM2 ,Layer 3 IP DA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 6.--10. " L3HSBM2 ,Layer 3 IP SA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM2 , Layer 3 IP DA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 4. " L3DAM2 ,Layer 3 IP DA Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " L3SAIM2 , Layer 3 IP SA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 2. " L3SAM2 ,Layer 3 IP SA Match Enable" "Disabled,Enabled" bitfld.long 0x00 0. " L3PEN2 , Layer 3 Protocol Enable" "Disabled,Enabled" line.long 0x04 "LAYER4_ADDRESS2,Layer 4 Address Register2" hexmask.long.word 0x04 16.--31. 1. " L4DP2 ,Layer 4 Destination Port Number Field" hexmask.long.word 0x04 0.--15. 1. " L4SP2 ,Layer 4 Source Port Number Field" group.long (0x460+0x10)++0x0F line.long 0x00 "LAYER3_ADDR0_REG2,Layer 3 Address 0 Register 2" line.long 0x04 "LAYER3_ADDR1_REG2,Layer 3 Address 1 Register 2" line.long 0x08 "LAYER3_ADDR2_REG2,Layer 3 Address 2 Register 2" line.long 0x0C "LAYER3_ADDR3_REG2,Layer 3 Address 3 Register 2" group.long 0x490++0x07 line.long 0x00 "L3_L4_CONTROL3,Layer 3 and Layer 4 Control Register 3" bitfld.long 0x00 21. " L4DPIM3 ,Layer 4 Destination Port Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 20. " L4DPM3 ,Layer 4 Destination Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 19. " L4SPIM3 ,Layer 4 Source Port Inverse Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " L4SPM3 ,Layer 4 Source Port Match Enable" "Disabled,Enabled" bitfld.long 0x00 16. " L4PEN3 ,Layer 4 Protocol Enable" "Disabled,Enabled" bitfld.long 0x00 11.--15. " L3HDBM3 ,Layer 3 IP DA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 6.--10. " L3HSBM3 ,Layer 3 IP SA Higher Bits Match" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM3 , Layer 3 IP DA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 4. " L3DAM3 ,Layer 3 IP DA Match Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " L3SAIM3 , Layer 3 IP SA Inverse Match Enable" "Disabled,Enabled" bitfld.long 0x00 2. " L3SAM3 ,Layer 3 IP SA Match Enable" "Disabled,Enabled" bitfld.long 0x00 0. " L3PEN3 , Layer 3 Protocol Enable" "Disabled,Enabled" line.long 0x04 "LAYER4_ADDRESS3,Layer 4 Address Register3" hexmask.long.word 0x04 16.--31. 1. " L4DP3 ,Layer 4 Destination Port Number Field" hexmask.long.word 0x04 0.--15. 1. " L4SP3 ,Layer 4 Source Port Number Field" group.long (0x490+0x10)++0x0F line.long 0x00 "LAYER3_ADDR0_REG3,Layer 3 Address 0 Register 3" line.long 0x04 "LAYER3_ADDR1_REG3,Layer 3 Address 1 Register 3" line.long 0x08 "LAYER3_ADDR2_REG3,Layer 3 Address 2 Register 3" line.long 0x0C "LAYER3_ADDR3_REG3,Layer 3 Address 3 Register 3" group.long 0x500++0x1F line.long 0x00 "HASH_TABLE_REG0,Hash Table Register 0" line.long 0x04 "HASH_TABLE_REG1,Hash Table Register 1" line.long 0x08 "HASH_TABLE_REG2,Hash Table Register 2" line.long 0x0C "HASH_TABLE_REG3,Hash Table Register 3" line.long 0x10 "HASH_TABLE_REG4,Hash Table Register 4" line.long 0x14 "HASH_TABLE_REG5,Hash Table Register 5" line.long 0x18 "HASH_TABLE_REG6,Hash Table Register 6" line.long 0x1C "HASH_TABLE_REG7,Hash Table Register 7" group.long 0x584++0x07 line.long 0x00 "VLAN_INCL_REG,VLAN Tag Inclusion or Replacement Register" bitfld.long 0x00 19. " CSVL ,C-VLAN or S-VLAN" "C-VLAN,S-VLAN" bitfld.long 0x00 18. " VLP ,VLAN Priority Control" "Disabled,Enabled" bitfld.long 0x00 16.--17. " VLC ,VLAN Tag Control in Transmit Frames " "No VLAN tag control,VLAN tag deletion,VLAN tag insertion,VLAN tag replacement" textline " " hexmask.long.word 0x00 0.--15. 1. " VLT ,VLAN Tag for Transmit Frames" line.long 0x04 "VLAN_HASH_TABLE_REG,VLAN Hash Table Register" hexmask.long.word 0x04 0.--15. 1. " VLHT ,VLAN Hash Table" group.long 0x700++0x07 line.long 0x00 "TIMESTAMP_CONTROL,Timestamp Control Register" sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 28. " ATSEN3 ,Auxiliary Snapshot 3 Enable" "Disabled,Enabled" rbitfld.long 0x00 27. " ATSEN2 ,Auxiliary Snapshot 2 Enable" "Disabled,Enabled" rbitfld.long 0x00 26. " ATSEN1 ,Auxiliary Snapshot 1 Enable" "Disabled,Enabled" textline " " rbitfld.long 0x00 25. " ATSEN0 ,Auxiliary Snapshot 0 Enable" "Disabled,Enabled" rbitfld.long 0x00 24. " ATSFC ,Auxiliary Snapshot FIFO Clear" "Not cleared,Cleared" textline " " else bitfld.long 0x00 25. " ATSEN0 ,Auxiliary Snapshot 0 Enable" "Disabled,Enabled" bitfld.long 0x00 24. " ATSFC ,Auxiliary Snapshot FIFO Clear" "Not cleared,Cleared" textline " " endif bitfld.long 0x00 18. " TSENMACADDR ,Enable MAC address for PTP Frame Filtering" "Disabled,Enabled" bitfld.long 0x00 16.--17. " SNAPTYPSEL ,Select PTP packets for Taking Snapshots" "0,1,2,3" textline " " bitfld.long 0x00 15. " TSMSTRENA ,Enable Snapshot for Messages Relevant to Master" "Disabled,Enabled" bitfld.long 0x00 14. " TSEVNTENA ,Enable Timestamp Snapshot for Event Messages" "Disabled,Enabled" textline " " bitfld.long 0x00 13. " TSIPV4ENA ,Enable Processing of PTP Frames Sent over IPv4-UDP" "Disabled,Enabled" bitfld.long 0x00 12. " TSIPV6ENA ,Enable Processing of PTP Frames Sent Over IPv6-UDP" "Disabled,Enabled" bitfld.long 0x00 11. " TSIPENA ,Enable Processing of PTP over Ethernet Frames" "Disabled,Enabled" textline " " bitfld.long 0x00 10. " TSVER2ENA ,Enable PTP packet Processing for Version 2 Format" "Disable,Enable" bitfld.long 0x00 9. " TSCTRLSSR ,Timestamp Digital or Binary Rollover Control" "At 0x7FFF_FFFF,At 1ns" bitfld.long 0x00 8. " TSENALL ,Enable Timestamp for All Frames" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 5. " TSADDREG ,Addend Reg Update" "Not updated,Updated" rbitfld.long 0x00 4. " TSTRIG ,Timestamp Interrupt Trigger Enable" "Disabled,Enabled" rbitfld.long 0x00 3. " TSUPDT ,Timestamp Update" "Not updated,Updated" textline " " rbitfld.long 0x00 2. " TSINIT ,Timestamp Initialize" "Not initialized,Initialized" rbitfld.long 0x00 1. " TSCFUPDT ,Timestamp Fine or Coarse Update" "Coarse,Fine" textline " " else bitfld.long 0x00 5. " TSADDREG ,Addend Reg Update" "Not updated,Updated" bitfld.long 0x00 4. " TSTRIG ,Timestamp Interrupt Trigger Enable" "Disabled,Enabled" bitfld.long 0x00 3. " TSUPDT ,Timestamp Update" "Not updated,Updated" textline " " bitfld.long 0x00 2. " TSINIT ,Timestamp Initialize" "Not initialized,Initialized" bitfld.long 0x00 1. " TSCFUPDT ,Timestamp Fine or Coarse Update" "Coarse,Fine" textline " " endif bitfld.long 0x00 0. " TSENA ,Timestamp Enable" "Disabled,Enabled" line.long 0x04 "SUB_SECOND_INCREMENT,Sub-Second Increment Register" hexmask.long.byte 0x04 0.--7. 1. " SSINC ,Sub-second Increment Value" rgroup.long 0x708++0x07 line.long 0x00 "SYSTEM_TIME_SECONDS, System Time - Seconds Register" line.long 0x04 "SYSTEM_TIME_NANOSECONDS,System Time - Nanoseconds Register" hexmask.long 0x04 0.--30. 1. " TSSS ,Timestamp Sub Seconds" group.long 0x710++0x17 line.long 0x00 "SYSTEM_TIME_SECONDS_UPDATE,System Time - Seconds Update Register" line.long 0x04 "SYSTEM_TIME_NANOSECONDS_UPDATE,System Time - Nanoseconds Update Register" bitfld.long 0x04 31. " ADDSUB ,Add or subtract time" "Add,Subtract" hexmask.long 0x04 0.--30. 1. " TSSS ,Timestamp Sub Second" line.long 0x08 "TIMESTAMP_ADDEND,Timestamp Addend Register" line.long 0x0C "TARGET_TIME_SECONDS,Target Time Seconds Register" line.long 0x10 "TARGET_TIME_NANOSECONDS,Target Time Nanoseconds Register" rbitfld.long 0x10 31. " TRGTBUSY ,Target Time Register Busy" "Not busy,Busy" hexmask.long 0x10 0.--30. 1. " TTSLO ,Target Timestamp Low Register" line.long 0x14 "SYSTEM_TIME_HIGHER_WORD_SECONDS,System Time Higher Word Seconds Register" hexmask.long.word 0x14 0.--15. 1. " TSHWR ,Timestamp Higher Word Register" rgroup.long 0x728++0x03 line.long 0x00 "TIMESTAMP_STATUS,Timestamp Status Register" bitfld.long 0x00 25.--29. " ATSNS ,Number of Auxiliary Timestamp Snapshots" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " ATSSTM ,Auxiliary Timestamp Snapshot Trigger Missed" "Not missed,Missed" bitfld.long 0x00 19. " ATSSTN3 ,Auxiliary Timestamp Snapshot Trigger 3 Identifier" "Not available,Available" textline " " bitfld.long 0x00 18. " ATSSTN2 ,Auxiliary Timestamp Snapshot Trigger 2 Identifier" "Not available,Available" bitfld.long 0x00 17. " ATSSTN1 ,Auxiliary Timestamp Snapshot Trigger 1 Identifier" "Not available,Available" bitfld.long 0x00 16. " ATSSTN0 ,Auxiliary Timestamp Snapshot Trigger 0 Identifier" "Not available,Available" textline " " bitfld.long 0x00 3. " TSTRGTERR ,Timestamp Target Time Error" "No error,Error" bitfld.long 0x00 2. " AUXTSTRIG ,Auxiliary Timestamp Trigger Snapshot" "Not written,Written" bitfld.long 0x00 1. " TSTARGT ,Timestamp Target Time Reached" "Not reached,Reached" textline " " bitfld.long 0x00 0. " TSSOVF ,Timestamp Seconds Overflow" "No overflow,Overflow" if (((d.l(ad:0xFF702000+0x72C))&0x10)==0x10) group.long 0x72C++0x03 line.long 0x00 "PPS_CONTROL,PPS Control Register" bitfld.long 0x00 5.--6. " TRGTMODSEL0 ,Target Time Register Mode for PPS0 Output" "Interrupt event,,Int event and PPS0,No interrupts" bitfld.long 0x00 4. " PPSEN0 ,Flexible PPS Output Mode Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0.--3. " PPSCMD0 ,Flexible PPS0 Output" "No command,START Single Pulse,START Pulse Train,Cancel START,STOP Pulse Train at time,STOP Pulse Train immediately,Cancel STOP Pulse Train,?..." else group.long 0x72C++0x03 line.long 0x00 "PPS_CONTROL,PPS Control Register" bitfld.long 0x00 5.--6. " TRGTMODSEL0 ,Target Time Register Mode for PPS0 Output" "Interrupt event,,Int event and PPS0,No interrupts" bitfld.long 0x00 4. " PPSEN0 ,Flexible PPS Output Mode Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0.--3. " PSCTRL0 ,PPS0 Output Frequency Control" ",2Hz/1Hz,4Hz/2HZ,8Hz/4Hz,16Hz/8Hz,32Hz/16Hz,64Hz/32Hz,128Hz/64Hz,256Hz/128Hz,512Hz/256Hz,1024Hz/512Hz,2048Hz/1024Hz,4096Hz/2048Hz,8192Hz/4096Hz,16384Hz/8192Hz,32768Hz/16384Hz" endif rgroup.long 0x730++0x07 line.long 0x00 "AUXILIARY_TIMESTAMP_NANOSECONDS,Auxiliary Timestamp Nanoseconds Register" hexmask.long 0x00 0.--30. 1. " AUXTSLO ,Auxiliary Timestamp Nanoseconds" line.long 0x04 "AUXILIARY_TIMESTAMP_SECONDS,Auxiliary Timestamp Seconds Register" group.long 0x760++0x07 line.long 0x00 "PPS0_INTERVAL,PPS0 Interval Register" line.long 0x04 "PPS0_WIDTH,PPS0 Width Register" width 21. tree "MAC Address 16 - 127 Registers" group.long 0x800++0x037F line.long 0x0 "MAC_ADDRESS16_HIGH,MAC Address16 High Register" bitfld.long 0x0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x0 0.--15. 1. " ADDRHI ,MAC Address16" line.long (0x0+0x04) "MAC_ADDRESS16_LOW,MAC Address16 Low Register" line.long 0x8 "MAC_ADDRESS17_HIGH,MAC Address17 High Register" bitfld.long 0x8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x8 0.--15. 1. " ADDRHI ,MAC Address17" line.long (0x8+0x04) "MAC_ADDRESS17_LOW,MAC Address17 Low Register" line.long 0x10 "MAC_ADDRESS18_HIGH,MAC Address18 High Register" bitfld.long 0x10 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x10 30. " SA ,Source Address" "DA,SA" bitfld.long 0x10 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x10 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x10 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x10 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x10 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x10 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x10 0.--15. 1. " ADDRHI ,MAC Address18" line.long (0x10+0x04) "MAC_ADDRESS18_LOW,MAC Address18 Low Register" line.long 0x18 "MAC_ADDRESS19_HIGH,MAC Address19 High Register" bitfld.long 0x18 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x18 30. " SA ,Source Address" "DA,SA" bitfld.long 0x18 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x18 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x18 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x18 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x18 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x18 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x18 0.--15. 1. " ADDRHI ,MAC Address19" line.long (0x18+0x04) "MAC_ADDRESS19_LOW,MAC Address19 Low Register" line.long 0x20 "MAC_ADDRESS20_HIGH,MAC Address20 High Register" bitfld.long 0x20 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x20 30. " SA ,Source Address" "DA,SA" bitfld.long 0x20 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x20 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x20 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x20 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x20 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x20 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x20 0.--15. 1. " ADDRHI ,MAC Address20" line.long (0x20+0x04) "MAC_ADDRESS20_LOW,MAC Address20 Low Register" line.long 0x28 "MAC_ADDRESS21_HIGH,MAC Address21 High Register" bitfld.long 0x28 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x28 30. " SA ,Source Address" "DA,SA" bitfld.long 0x28 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x28 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x28 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x28 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x28 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x28 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x28 0.--15. 1. " ADDRHI ,MAC Address21" line.long (0x28+0x04) "MAC_ADDRESS21_LOW,MAC Address21 Low Register" line.long 0x30 "MAC_ADDRESS22_HIGH,MAC Address22 High Register" bitfld.long 0x30 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x30 30. " SA ,Source Address" "DA,SA" bitfld.long 0x30 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x30 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x30 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x30 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x30 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x30 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x30 0.--15. 1. " ADDRHI ,MAC Address22" line.long (0x30+0x04) "MAC_ADDRESS22_LOW,MAC Address22 Low Register" line.long 0x38 "MAC_ADDRESS23_HIGH,MAC Address23 High Register" bitfld.long 0x38 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x38 30. " SA ,Source Address" "DA,SA" bitfld.long 0x38 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x38 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x38 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x38 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x38 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x38 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x38 0.--15. 1. " ADDRHI ,MAC Address23" line.long (0x38+0x04) "MAC_ADDRESS23_LOW,MAC Address23 Low Register" line.long 0x40 "MAC_ADDRESS24_HIGH,MAC Address24 High Register" bitfld.long 0x40 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x40 30. " SA ,Source Address" "DA,SA" bitfld.long 0x40 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x40 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x40 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x40 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x40 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x40 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x40 0.--15. 1. " ADDRHI ,MAC Address24" line.long (0x40+0x04) "MAC_ADDRESS24_LOW,MAC Address24 Low Register" line.long 0x48 "MAC_ADDRESS25_HIGH,MAC Address25 High Register" bitfld.long 0x48 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x48 30. " SA ,Source Address" "DA,SA" bitfld.long 0x48 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x48 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x48 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x48 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x48 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x48 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x48 0.--15. 1. " ADDRHI ,MAC Address25" line.long (0x48+0x04) "MAC_ADDRESS25_LOW,MAC Address25 Low Register" line.long 0x50 "MAC_ADDRESS26_HIGH,MAC Address26 High Register" bitfld.long 0x50 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x50 30. " SA ,Source Address" "DA,SA" bitfld.long 0x50 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x50 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x50 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x50 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x50 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x50 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x50 0.--15. 1. " ADDRHI ,MAC Address26" line.long (0x50+0x04) "MAC_ADDRESS26_LOW,MAC Address26 Low Register" line.long 0x58 "MAC_ADDRESS27_HIGH,MAC Address27 High Register" bitfld.long 0x58 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x58 30. " SA ,Source Address" "DA,SA" bitfld.long 0x58 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x58 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x58 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x58 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x58 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x58 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x58 0.--15. 1. " ADDRHI ,MAC Address27" line.long (0x58+0x04) "MAC_ADDRESS27_LOW,MAC Address27 Low Register" line.long 0x60 "MAC_ADDRESS28_HIGH,MAC Address28 High Register" bitfld.long 0x60 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x60 30. " SA ,Source Address" "DA,SA" bitfld.long 0x60 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x60 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x60 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x60 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x60 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x60 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x60 0.--15. 1. " ADDRHI ,MAC Address28" line.long (0x60+0x04) "MAC_ADDRESS28_LOW,MAC Address28 Low Register" line.long 0x68 "MAC_ADDRESS29_HIGH,MAC Address29 High Register" bitfld.long 0x68 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x68 30. " SA ,Source Address" "DA,SA" bitfld.long 0x68 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x68 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x68 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x68 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x68 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x68 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x68 0.--15. 1. " ADDRHI ,MAC Address29" line.long (0x68+0x04) "MAC_ADDRESS29_LOW,MAC Address29 Low Register" line.long 0x70 "MAC_ADDRESS30_HIGH,MAC Address30 High Register" bitfld.long 0x70 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x70 30. " SA ,Source Address" "DA,SA" bitfld.long 0x70 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x70 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x70 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x70 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x70 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x70 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x70 0.--15. 1. " ADDRHI ,MAC Address30" line.long (0x70+0x04) "MAC_ADDRESS30_LOW,MAC Address30 Low Register" line.long 0x78 "MAC_ADDRESS31_HIGH,MAC Address31 High Register" bitfld.long 0x78 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x78 30. " SA ,Source Address" "DA,SA" bitfld.long 0x78 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x78 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x78 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x78 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x78 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x78 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x78 0.--15. 1. " ADDRHI ,MAC Address31" line.long (0x78+0x04) "MAC_ADDRESS31_LOW,MAC Address31 Low Register" line.long 0x80 "MAC_ADDRESS32_HIGH,MAC Address32 High Register" bitfld.long 0x80 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x80 30. " SA ,Source Address" "DA,SA" bitfld.long 0x80 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x80 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x80 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x80 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x80 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x80 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x80 0.--15. 1. " ADDRHI ,MAC Address32" line.long (0x80+0x04) "MAC_ADDRESS32_LOW,MAC Address32 Low Register" line.long 0x88 "MAC_ADDRESS33_HIGH,MAC Address33 High Register" bitfld.long 0x88 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x88 30. " SA ,Source Address" "DA,SA" bitfld.long 0x88 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x88 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x88 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x88 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x88 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x88 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x88 0.--15. 1. " ADDRHI ,MAC Address33" line.long (0x88+0x04) "MAC_ADDRESS33_LOW,MAC Address33 Low Register" line.long 0x90 "MAC_ADDRESS34_HIGH,MAC Address34 High Register" bitfld.long 0x90 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x90 30. " SA ,Source Address" "DA,SA" bitfld.long 0x90 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x90 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x90 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x90 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x90 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x90 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x90 0.--15. 1. " ADDRHI ,MAC Address34" line.long (0x90+0x04) "MAC_ADDRESS34_LOW,MAC Address34 Low Register" line.long 0x98 "MAC_ADDRESS35_HIGH,MAC Address35 High Register" bitfld.long 0x98 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x98 30. " SA ,Source Address" "DA,SA" bitfld.long 0x98 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x98 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x98 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x98 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x98 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x98 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x98 0.--15. 1. " ADDRHI ,MAC Address35" line.long (0x98+0x04) "MAC_ADDRESS35_LOW,MAC Address35 Low Register" line.long 0xA0 "MAC_ADDRESS36_HIGH,MAC Address36 High Register" bitfld.long 0xA0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xA0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xA0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xA0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xA0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xA0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xA0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xA0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xA0 0.--15. 1. " ADDRHI ,MAC Address36" line.long (0xA0+0x04) "MAC_ADDRESS36_LOW,MAC Address36 Low Register" line.long 0xA8 "MAC_ADDRESS37_HIGH,MAC Address37 High Register" bitfld.long 0xA8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xA8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xA8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xA8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xA8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xA8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xA8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xA8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xA8 0.--15. 1. " ADDRHI ,MAC Address37" line.long (0xA8+0x04) "MAC_ADDRESS37_LOW,MAC Address37 Low Register" line.long 0xB0 "MAC_ADDRESS38_HIGH,MAC Address38 High Register" bitfld.long 0xB0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xB0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xB0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xB0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xB0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xB0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xB0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xB0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xB0 0.--15. 1. " ADDRHI ,MAC Address38" line.long (0xB0+0x04) "MAC_ADDRESS38_LOW,MAC Address38 Low Register" line.long 0xB8 "MAC_ADDRESS39_HIGH,MAC Address39 High Register" bitfld.long 0xB8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xB8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xB8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xB8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xB8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xB8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xB8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xB8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xB8 0.--15. 1. " ADDRHI ,MAC Address39" line.long (0xB8+0x04) "MAC_ADDRESS39_LOW,MAC Address39 Low Register" line.long 0xC0 "MAC_ADDRESS40_HIGH,MAC Address40 High Register" bitfld.long 0xC0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xC0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xC0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xC0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xC0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xC0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xC0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xC0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xC0 0.--15. 1. " ADDRHI ,MAC Address40" line.long (0xC0+0x04) "MAC_ADDRESS40_LOW,MAC Address40 Low Register" line.long 0xC8 "MAC_ADDRESS41_HIGH,MAC Address41 High Register" bitfld.long 0xC8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xC8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xC8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xC8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xC8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xC8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xC8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xC8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xC8 0.--15. 1. " ADDRHI ,MAC Address41" line.long (0xC8+0x04) "MAC_ADDRESS41_LOW,MAC Address41 Low Register" line.long 0xD0 "MAC_ADDRESS42_HIGH,MAC Address42 High Register" bitfld.long 0xD0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xD0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xD0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xD0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xD0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xD0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xD0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xD0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xD0 0.--15. 1. " ADDRHI ,MAC Address42" line.long (0xD0+0x04) "MAC_ADDRESS42_LOW,MAC Address42 Low Register" line.long 0xD8 "MAC_ADDRESS43_HIGH,MAC Address43 High Register" bitfld.long 0xD8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xD8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xD8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xD8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xD8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xD8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xD8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xD8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xD8 0.--15. 1. " ADDRHI ,MAC Address43" line.long (0xD8+0x04) "MAC_ADDRESS43_LOW,MAC Address43 Low Register" line.long 0xE0 "MAC_ADDRESS44_HIGH,MAC Address44 High Register" bitfld.long 0xE0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xE0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xE0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xE0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xE0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xE0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xE0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xE0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xE0 0.--15. 1. " ADDRHI ,MAC Address44" line.long (0xE0+0x04) "MAC_ADDRESS44_LOW,MAC Address44 Low Register" line.long 0xE8 "MAC_ADDRESS45_HIGH,MAC Address45 High Register" bitfld.long 0xE8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xE8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xE8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xE8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xE8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xE8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xE8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xE8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xE8 0.--15. 1. " ADDRHI ,MAC Address45" line.long (0xE8+0x04) "MAC_ADDRESS45_LOW,MAC Address45 Low Register" line.long 0xF0 "MAC_ADDRESS46_HIGH,MAC Address46 High Register" bitfld.long 0xF0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xF0 30. " SA ,Source Address" "DA,SA" bitfld.long 0xF0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xF0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xF0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xF0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xF0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xF0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xF0 0.--15. 1. " ADDRHI ,MAC Address46" line.long (0xF0+0x04) "MAC_ADDRESS46_LOW,MAC Address46 Low Register" line.long 0xF8 "MAC_ADDRESS47_HIGH,MAC Address47 High Register" bitfld.long 0xF8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0xF8 30. " SA ,Source Address" "DA,SA" bitfld.long 0xF8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0xF8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0xF8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0xF8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0xF8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0xF8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0xF8 0.--15. 1. " ADDRHI ,MAC Address47" line.long (0xF8+0x04) "MAC_ADDRESS47_LOW,MAC Address47 Low Register" line.long 0x100 "MAC_ADDRESS48_HIGH,MAC Address48 High Register" bitfld.long 0x100 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x100 30. " SA ,Source Address" "DA,SA" bitfld.long 0x100 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x100 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x100 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x100 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x100 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x100 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x100 0.--15. 1. " ADDRHI ,MAC Address48" line.long (0x100+0x04) "MAC_ADDRESS48_LOW,MAC Address48 Low Register" line.long 0x108 "MAC_ADDRESS49_HIGH,MAC Address49 High Register" bitfld.long 0x108 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x108 30. " SA ,Source Address" "DA,SA" bitfld.long 0x108 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x108 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x108 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x108 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x108 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x108 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x108 0.--15. 1. " ADDRHI ,MAC Address49" line.long (0x108+0x04) "MAC_ADDRESS49_LOW,MAC Address49 Low Register" line.long 0x110 "MAC_ADDRESS50_HIGH,MAC Address50 High Register" bitfld.long 0x110 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x110 30. " SA ,Source Address" "DA,SA" bitfld.long 0x110 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x110 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x110 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x110 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x110 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x110 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x110 0.--15. 1. " ADDRHI ,MAC Address50" line.long (0x110+0x04) "MAC_ADDRESS50_LOW,MAC Address50 Low Register" line.long 0x118 "MAC_ADDRESS51_HIGH,MAC Address51 High Register" bitfld.long 0x118 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x118 30. " SA ,Source Address" "DA,SA" bitfld.long 0x118 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x118 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x118 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x118 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x118 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x118 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x118 0.--15. 1. " ADDRHI ,MAC Address51" line.long (0x118+0x04) "MAC_ADDRESS51_LOW,MAC Address51 Low Register" line.long 0x120 "MAC_ADDRESS52_HIGH,MAC Address52 High Register" bitfld.long 0x120 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x120 30. " SA ,Source Address" "DA,SA" bitfld.long 0x120 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x120 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x120 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x120 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x120 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x120 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x120 0.--15. 1. " ADDRHI ,MAC Address52" line.long (0x120+0x04) "MAC_ADDRESS52_LOW,MAC Address52 Low Register" line.long 0x128 "MAC_ADDRESS53_HIGH,MAC Address53 High Register" bitfld.long 0x128 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x128 30. " SA ,Source Address" "DA,SA" bitfld.long 0x128 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x128 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x128 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x128 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x128 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x128 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x128 0.--15. 1. " ADDRHI ,MAC Address53" line.long (0x128+0x04) "MAC_ADDRESS53_LOW,MAC Address53 Low Register" line.long 0x130 "MAC_ADDRESS54_HIGH,MAC Address54 High Register" bitfld.long 0x130 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x130 30. " SA ,Source Address" "DA,SA" bitfld.long 0x130 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x130 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x130 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x130 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x130 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x130 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x130 0.--15. 1. " ADDRHI ,MAC Address54" line.long (0x130+0x04) "MAC_ADDRESS54_LOW,MAC Address54 Low Register" line.long 0x138 "MAC_ADDRESS55_HIGH,MAC Address55 High Register" bitfld.long 0x138 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x138 30. " SA ,Source Address" "DA,SA" bitfld.long 0x138 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x138 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x138 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x138 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x138 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x138 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x138 0.--15. 1. " ADDRHI ,MAC Address55" line.long (0x138+0x04) "MAC_ADDRESS55_LOW,MAC Address55 Low Register" line.long 0x140 "MAC_ADDRESS56_HIGH,MAC Address56 High Register" bitfld.long 0x140 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x140 30. " SA ,Source Address" "DA,SA" bitfld.long 0x140 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x140 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x140 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x140 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x140 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x140 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x140 0.--15. 1. " ADDRHI ,MAC Address56" line.long (0x140+0x04) "MAC_ADDRESS56_LOW,MAC Address56 Low Register" line.long 0x148 "MAC_ADDRESS57_HIGH,MAC Address57 High Register" bitfld.long 0x148 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x148 30. " SA ,Source Address" "DA,SA" bitfld.long 0x148 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x148 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x148 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x148 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x148 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x148 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x148 0.--15. 1. " ADDRHI ,MAC Address57" line.long (0x148+0x04) "MAC_ADDRESS57_LOW,MAC Address57 Low Register" line.long 0x150 "MAC_ADDRESS58_HIGH,MAC Address58 High Register" bitfld.long 0x150 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x150 30. " SA ,Source Address" "DA,SA" bitfld.long 0x150 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x150 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x150 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x150 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x150 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x150 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x150 0.--15. 1. " ADDRHI ,MAC Address58" line.long (0x150+0x04) "MAC_ADDRESS58_LOW,MAC Address58 Low Register" line.long 0x158 "MAC_ADDRESS59_HIGH,MAC Address59 High Register" bitfld.long 0x158 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x158 30. " SA ,Source Address" "DA,SA" bitfld.long 0x158 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x158 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x158 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x158 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x158 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x158 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x158 0.--15. 1. " ADDRHI ,MAC Address59" line.long (0x158+0x04) "MAC_ADDRESS59_LOW,MAC Address59 Low Register" line.long 0x160 "MAC_ADDRESS60_HIGH,MAC Address60 High Register" bitfld.long 0x160 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x160 30. " SA ,Source Address" "DA,SA" bitfld.long 0x160 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x160 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x160 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x160 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x160 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x160 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x160 0.--15. 1. " ADDRHI ,MAC Address60" line.long (0x160+0x04) "MAC_ADDRESS60_LOW,MAC Address60 Low Register" line.long 0x168 "MAC_ADDRESS61_HIGH,MAC Address61 High Register" bitfld.long 0x168 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x168 30. " SA ,Source Address" "DA,SA" bitfld.long 0x168 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x168 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x168 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x168 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x168 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x168 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x168 0.--15. 1. " ADDRHI ,MAC Address61" line.long (0x168+0x04) "MAC_ADDRESS61_LOW,MAC Address61 Low Register" line.long 0x170 "MAC_ADDRESS62_HIGH,MAC Address62 High Register" bitfld.long 0x170 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x170 30. " SA ,Source Address" "DA,SA" bitfld.long 0x170 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x170 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x170 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x170 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x170 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x170 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x170 0.--15. 1. " ADDRHI ,MAC Address62" line.long (0x170+0x04) "MAC_ADDRESS62_LOW,MAC Address62 Low Register" line.long 0x178 "MAC_ADDRESS63_HIGH,MAC Address63 High Register" bitfld.long 0x178 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x178 30. " SA ,Source Address" "DA,SA" bitfld.long 0x178 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x178 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x178 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x178 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x178 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x178 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x178 0.--15. 1. " ADDRHI ,MAC Address63" line.long (0x178+0x04) "MAC_ADDRESS63_LOW,MAC Address63 Low Register" line.long 0x180 "MAC_ADDRESS64_HIGH,MAC Address64 High Register" bitfld.long 0x180 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x180 30. " SA ,Source Address" "DA,SA" bitfld.long 0x180 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x180 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x180 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x180 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x180 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x180 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x180 0.--15. 1. " ADDRHI ,MAC Address64" line.long (0x180+0x04) "MAC_ADDRESS64_LOW,MAC Address64 Low Register" line.long 0x188 "MAC_ADDRESS65_HIGH,MAC Address65 High Register" bitfld.long 0x188 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x188 30. " SA ,Source Address" "DA,SA" bitfld.long 0x188 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x188 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x188 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x188 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x188 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x188 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x188 0.--15. 1. " ADDRHI ,MAC Address65" line.long (0x188+0x04) "MAC_ADDRESS65_LOW,MAC Address65 Low Register" line.long 0x190 "MAC_ADDRESS66_HIGH,MAC Address66 High Register" bitfld.long 0x190 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x190 30. " SA ,Source Address" "DA,SA" bitfld.long 0x190 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x190 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x190 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x190 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x190 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x190 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x190 0.--15. 1. " ADDRHI ,MAC Address66" line.long (0x190+0x04) "MAC_ADDRESS66_LOW,MAC Address66 Low Register" line.long 0x198 "MAC_ADDRESS67_HIGH,MAC Address67 High Register" bitfld.long 0x198 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x198 30. " SA ,Source Address" "DA,SA" bitfld.long 0x198 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x198 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x198 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x198 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x198 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x198 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x198 0.--15. 1. " ADDRHI ,MAC Address67" line.long (0x198+0x04) "MAC_ADDRESS67_LOW,MAC Address67 Low Register" line.long 0x1A0 "MAC_ADDRESS68_HIGH,MAC Address68 High Register" bitfld.long 0x1A0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1A0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1A0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1A0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1A0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1A0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1A0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1A0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1A0 0.--15. 1. " ADDRHI ,MAC Address68" line.long (0x1A0+0x04) "MAC_ADDRESS68_LOW,MAC Address68 Low Register" line.long 0x1A8 "MAC_ADDRESS69_HIGH,MAC Address69 High Register" bitfld.long 0x1A8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1A8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1A8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1A8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1A8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1A8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1A8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1A8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1A8 0.--15. 1. " ADDRHI ,MAC Address69" line.long (0x1A8+0x04) "MAC_ADDRESS69_LOW,MAC Address69 Low Register" line.long 0x1B0 "MAC_ADDRESS70_HIGH,MAC Address70 High Register" bitfld.long 0x1B0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1B0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1B0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1B0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1B0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1B0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1B0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1B0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1B0 0.--15. 1. " ADDRHI ,MAC Address70" line.long (0x1B0+0x04) "MAC_ADDRESS70_LOW,MAC Address70 Low Register" line.long 0x1B8 "MAC_ADDRESS71_HIGH,MAC Address71 High Register" bitfld.long 0x1B8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1B8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1B8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1B8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1B8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1B8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1B8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1B8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1B8 0.--15. 1. " ADDRHI ,MAC Address71" line.long (0x1B8+0x04) "MAC_ADDRESS71_LOW,MAC Address71 Low Register" line.long 0x1C0 "MAC_ADDRESS72_HIGH,MAC Address72 High Register" bitfld.long 0x1C0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1C0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1C0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1C0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1C0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1C0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1C0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1C0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1C0 0.--15. 1. " ADDRHI ,MAC Address72" line.long (0x1C0+0x04) "MAC_ADDRESS72_LOW,MAC Address72 Low Register" line.long 0x1C8 "MAC_ADDRESS73_HIGH,MAC Address73 High Register" bitfld.long 0x1C8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1C8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1C8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1C8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1C8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1C8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1C8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1C8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1C8 0.--15. 1. " ADDRHI ,MAC Address73" line.long (0x1C8+0x04) "MAC_ADDRESS73_LOW,MAC Address73 Low Register" line.long 0x1D0 "MAC_ADDRESS74_HIGH,MAC Address74 High Register" bitfld.long 0x1D0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1D0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1D0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1D0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1D0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1D0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1D0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1D0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1D0 0.--15. 1. " ADDRHI ,MAC Address74" line.long (0x1D0+0x04) "MAC_ADDRESS74_LOW,MAC Address74 Low Register" line.long 0x1D8 "MAC_ADDRESS75_HIGH,MAC Address75 High Register" bitfld.long 0x1D8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1D8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1D8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1D8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1D8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1D8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1D8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1D8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1D8 0.--15. 1. " ADDRHI ,MAC Address75" line.long (0x1D8+0x04) "MAC_ADDRESS75_LOW,MAC Address75 Low Register" line.long 0x1E0 "MAC_ADDRESS76_HIGH,MAC Address76 High Register" bitfld.long 0x1E0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1E0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1E0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1E0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1E0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1E0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1E0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1E0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1E0 0.--15. 1. " ADDRHI ,MAC Address76" line.long (0x1E0+0x04) "MAC_ADDRESS76_LOW,MAC Address76 Low Register" line.long 0x1E8 "MAC_ADDRESS77_HIGH,MAC Address77 High Register" bitfld.long 0x1E8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1E8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1E8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1E8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1E8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1E8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1E8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1E8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1E8 0.--15. 1. " ADDRHI ,MAC Address77" line.long (0x1E8+0x04) "MAC_ADDRESS77_LOW,MAC Address77 Low Register" line.long 0x1F0 "MAC_ADDRESS78_HIGH,MAC Address78 High Register" bitfld.long 0x1F0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1F0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1F0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1F0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1F0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1F0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1F0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1F0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1F0 0.--15. 1. " ADDRHI ,MAC Address78" line.long (0x1F0+0x04) "MAC_ADDRESS78_LOW,MAC Address78 Low Register" line.long 0x1F8 "MAC_ADDRESS79_HIGH,MAC Address79 High Register" bitfld.long 0x1F8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x1F8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x1F8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x1F8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x1F8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x1F8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x1F8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x1F8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x1F8 0.--15. 1. " ADDRHI ,MAC Address79" line.long (0x1F8+0x04) "MAC_ADDRESS79_LOW,MAC Address79 Low Register" line.long 0x200 "MAC_ADDRESS80_HIGH,MAC Address80 High Register" bitfld.long 0x200 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x200 30. " SA ,Source Address" "DA,SA" bitfld.long 0x200 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x200 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x200 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x200 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x200 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x200 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x200 0.--15. 1. " ADDRHI ,MAC Address80" line.long (0x200+0x04) "MAC_ADDRESS80_LOW,MAC Address80 Low Register" line.long 0x208 "MAC_ADDRESS81_HIGH,MAC Address81 High Register" bitfld.long 0x208 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x208 30. " SA ,Source Address" "DA,SA" bitfld.long 0x208 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x208 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x208 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x208 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x208 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x208 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x208 0.--15. 1. " ADDRHI ,MAC Address81" line.long (0x208+0x04) "MAC_ADDRESS81_LOW,MAC Address81 Low Register" line.long 0x210 "MAC_ADDRESS82_HIGH,MAC Address82 High Register" bitfld.long 0x210 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x210 30. " SA ,Source Address" "DA,SA" bitfld.long 0x210 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x210 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x210 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x210 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x210 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x210 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x210 0.--15. 1. " ADDRHI ,MAC Address82" line.long (0x210+0x04) "MAC_ADDRESS82_LOW,MAC Address82 Low Register" line.long 0x218 "MAC_ADDRESS83_HIGH,MAC Address83 High Register" bitfld.long 0x218 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x218 30. " SA ,Source Address" "DA,SA" bitfld.long 0x218 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x218 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x218 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x218 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x218 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x218 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x218 0.--15. 1. " ADDRHI ,MAC Address83" line.long (0x218+0x04) "MAC_ADDRESS83_LOW,MAC Address83 Low Register" line.long 0x220 "MAC_ADDRESS84_HIGH,MAC Address84 High Register" bitfld.long 0x220 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x220 30. " SA ,Source Address" "DA,SA" bitfld.long 0x220 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x220 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x220 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x220 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x220 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x220 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x220 0.--15. 1. " ADDRHI ,MAC Address84" line.long (0x220+0x04) "MAC_ADDRESS84_LOW,MAC Address84 Low Register" line.long 0x228 "MAC_ADDRESS85_HIGH,MAC Address85 High Register" bitfld.long 0x228 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x228 30. " SA ,Source Address" "DA,SA" bitfld.long 0x228 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x228 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x228 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x228 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x228 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x228 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x228 0.--15. 1. " ADDRHI ,MAC Address85" line.long (0x228+0x04) "MAC_ADDRESS85_LOW,MAC Address85 Low Register" line.long 0x230 "MAC_ADDRESS86_HIGH,MAC Address86 High Register" bitfld.long 0x230 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x230 30. " SA ,Source Address" "DA,SA" bitfld.long 0x230 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x230 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x230 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x230 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x230 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x230 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x230 0.--15. 1. " ADDRHI ,MAC Address86" line.long (0x230+0x04) "MAC_ADDRESS86_LOW,MAC Address86 Low Register" line.long 0x238 "MAC_ADDRESS87_HIGH,MAC Address87 High Register" bitfld.long 0x238 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x238 30. " SA ,Source Address" "DA,SA" bitfld.long 0x238 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x238 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x238 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x238 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x238 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x238 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x238 0.--15. 1. " ADDRHI ,MAC Address87" line.long (0x238+0x04) "MAC_ADDRESS87_LOW,MAC Address87 Low Register" line.long 0x240 "MAC_ADDRESS88_HIGH,MAC Address88 High Register" bitfld.long 0x240 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x240 30. " SA ,Source Address" "DA,SA" bitfld.long 0x240 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x240 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x240 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x240 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x240 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x240 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x240 0.--15. 1. " ADDRHI ,MAC Address88" line.long (0x240+0x04) "MAC_ADDRESS88_LOW,MAC Address88 Low Register" line.long 0x248 "MAC_ADDRESS89_HIGH,MAC Address89 High Register" bitfld.long 0x248 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x248 30. " SA ,Source Address" "DA,SA" bitfld.long 0x248 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x248 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x248 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x248 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x248 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x248 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x248 0.--15. 1. " ADDRHI ,MAC Address89" line.long (0x248+0x04) "MAC_ADDRESS89_LOW,MAC Address89 Low Register" line.long 0x250 "MAC_ADDRESS90_HIGH,MAC Address90 High Register" bitfld.long 0x250 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x250 30. " SA ,Source Address" "DA,SA" bitfld.long 0x250 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x250 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x250 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x250 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x250 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x250 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x250 0.--15. 1. " ADDRHI ,MAC Address90" line.long (0x250+0x04) "MAC_ADDRESS90_LOW,MAC Address90 Low Register" line.long 0x258 "MAC_ADDRESS91_HIGH,MAC Address91 High Register" bitfld.long 0x258 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x258 30. " SA ,Source Address" "DA,SA" bitfld.long 0x258 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x258 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x258 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x258 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x258 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x258 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x258 0.--15. 1. " ADDRHI ,MAC Address91" line.long (0x258+0x04) "MAC_ADDRESS91_LOW,MAC Address91 Low Register" line.long 0x260 "MAC_ADDRESS92_HIGH,MAC Address92 High Register" bitfld.long 0x260 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x260 30. " SA ,Source Address" "DA,SA" bitfld.long 0x260 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x260 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x260 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x260 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x260 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x260 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x260 0.--15. 1. " ADDRHI ,MAC Address92" line.long (0x260+0x04) "MAC_ADDRESS92_LOW,MAC Address92 Low Register" line.long 0x268 "MAC_ADDRESS93_HIGH,MAC Address93 High Register" bitfld.long 0x268 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x268 30. " SA ,Source Address" "DA,SA" bitfld.long 0x268 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x268 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x268 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x268 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x268 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x268 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x268 0.--15. 1. " ADDRHI ,MAC Address93" line.long (0x268+0x04) "MAC_ADDRESS93_LOW,MAC Address93 Low Register" line.long 0x270 "MAC_ADDRESS94_HIGH,MAC Address94 High Register" bitfld.long 0x270 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x270 30. " SA ,Source Address" "DA,SA" bitfld.long 0x270 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x270 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x270 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x270 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x270 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x270 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x270 0.--15. 1. " ADDRHI ,MAC Address94" line.long (0x270+0x04) "MAC_ADDRESS94_LOW,MAC Address94 Low Register" line.long 0x278 "MAC_ADDRESS95_HIGH,MAC Address95 High Register" bitfld.long 0x278 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x278 30. " SA ,Source Address" "DA,SA" bitfld.long 0x278 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x278 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x278 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x278 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x278 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x278 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x278 0.--15. 1. " ADDRHI ,MAC Address95" line.long (0x278+0x04) "MAC_ADDRESS95_LOW,MAC Address95 Low Register" line.long 0x280 "MAC_ADDRESS96_HIGH,MAC Address96 High Register" bitfld.long 0x280 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x280 30. " SA ,Source Address" "DA,SA" bitfld.long 0x280 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x280 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x280 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x280 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x280 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x280 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x280 0.--15. 1. " ADDRHI ,MAC Address96" line.long (0x280+0x04) "MAC_ADDRESS96_LOW,MAC Address96 Low Register" line.long 0x288 "MAC_ADDRESS97_HIGH,MAC Address97 High Register" bitfld.long 0x288 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x288 30. " SA ,Source Address" "DA,SA" bitfld.long 0x288 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x288 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x288 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x288 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x288 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x288 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x288 0.--15. 1. " ADDRHI ,MAC Address97" line.long (0x288+0x04) "MAC_ADDRESS97_LOW,MAC Address97 Low Register" line.long 0x290 "MAC_ADDRESS98_HIGH,MAC Address98 High Register" bitfld.long 0x290 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x290 30. " SA ,Source Address" "DA,SA" bitfld.long 0x290 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x290 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x290 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x290 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x290 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x290 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x290 0.--15. 1. " ADDRHI ,MAC Address98" line.long (0x290+0x04) "MAC_ADDRESS98_LOW,MAC Address98 Low Register" line.long 0x298 "MAC_ADDRESS99_HIGH,MAC Address99 High Register" bitfld.long 0x298 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x298 30. " SA ,Source Address" "DA,SA" bitfld.long 0x298 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x298 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x298 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x298 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x298 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x298 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x298 0.--15. 1. " ADDRHI ,MAC Address99" line.long (0x298+0x04) "MAC_ADDRESS99_LOW,MAC Address99 Low Register" line.long 0x2A0 "MAC_ADDRESS100_HIGH,MAC Address100 High Register" bitfld.long 0x2A0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2A0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2A0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2A0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2A0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2A0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2A0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2A0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2A0 0.--15. 1. " ADDRHI ,MAC Address100" line.long (0x2A0+0x04) "MAC_ADDRESS100_LOW,MAC Address100 Low Register" line.long 0x2A8 "MAC_ADDRESS101_HIGH,MAC Address101 High Register" bitfld.long 0x2A8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2A8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2A8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2A8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2A8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2A8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2A8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2A8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2A8 0.--15. 1. " ADDRHI ,MAC Address101" line.long (0x2A8+0x04) "MAC_ADDRESS101_LOW,MAC Address101 Low Register" line.long 0x2B0 "MAC_ADDRESS102_HIGH,MAC Address102 High Register" bitfld.long 0x2B0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2B0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2B0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2B0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2B0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2B0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2B0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2B0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2B0 0.--15. 1. " ADDRHI ,MAC Address102" line.long (0x2B0+0x04) "MAC_ADDRESS102_LOW,MAC Address102 Low Register" line.long 0x2B8 "MAC_ADDRESS103_HIGH,MAC Address103 High Register" bitfld.long 0x2B8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2B8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2B8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2B8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2B8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2B8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2B8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2B8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2B8 0.--15. 1. " ADDRHI ,MAC Address103" line.long (0x2B8+0x04) "MAC_ADDRESS103_LOW,MAC Address103 Low Register" line.long 0x2C0 "MAC_ADDRESS104_HIGH,MAC Address104 High Register" bitfld.long 0x2C0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2C0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2C0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2C0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2C0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2C0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2C0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2C0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2C0 0.--15. 1. " ADDRHI ,MAC Address104" line.long (0x2C0+0x04) "MAC_ADDRESS104_LOW,MAC Address104 Low Register" line.long 0x2C8 "MAC_ADDRESS105_HIGH,MAC Address105 High Register" bitfld.long 0x2C8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2C8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2C8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2C8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2C8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2C8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2C8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2C8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2C8 0.--15. 1. " ADDRHI ,MAC Address105" line.long (0x2C8+0x04) "MAC_ADDRESS105_LOW,MAC Address105 Low Register" line.long 0x2D0 "MAC_ADDRESS106_HIGH,MAC Address106 High Register" bitfld.long 0x2D0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2D0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2D0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2D0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2D0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2D0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2D0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2D0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2D0 0.--15. 1. " ADDRHI ,MAC Address106" line.long (0x2D0+0x04) "MAC_ADDRESS106_LOW,MAC Address106 Low Register" line.long 0x2D8 "MAC_ADDRESS107_HIGH,MAC Address107 High Register" bitfld.long 0x2D8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2D8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2D8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2D8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2D8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2D8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2D8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2D8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2D8 0.--15. 1. " ADDRHI ,MAC Address107" line.long (0x2D8+0x04) "MAC_ADDRESS107_LOW,MAC Address107 Low Register" line.long 0x2E0 "MAC_ADDRESS108_HIGH,MAC Address108 High Register" bitfld.long 0x2E0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2E0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2E0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2E0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2E0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2E0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2E0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2E0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2E0 0.--15. 1. " ADDRHI ,MAC Address108" line.long (0x2E0+0x04) "MAC_ADDRESS108_LOW,MAC Address108 Low Register" line.long 0x2E8 "MAC_ADDRESS109_HIGH,MAC Address109 High Register" bitfld.long 0x2E8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2E8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2E8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2E8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2E8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2E8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2E8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2E8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2E8 0.--15. 1. " ADDRHI ,MAC Address109" line.long (0x2E8+0x04) "MAC_ADDRESS109_LOW,MAC Address109 Low Register" line.long 0x2F0 "MAC_ADDRESS110_HIGH,MAC Address110 High Register" bitfld.long 0x2F0 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2F0 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2F0 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2F0 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2F0 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2F0 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2F0 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2F0 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2F0 0.--15. 1. " ADDRHI ,MAC Address110" line.long (0x2F0+0x04) "MAC_ADDRESS110_LOW,MAC Address110 Low Register" line.long 0x2F8 "MAC_ADDRESS111_HIGH,MAC Address111 High Register" bitfld.long 0x2F8 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x2F8 30. " SA ,Source Address" "DA,SA" bitfld.long 0x2F8 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x2F8 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x2F8 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x2F8 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x2F8 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x2F8 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x2F8 0.--15. 1. " ADDRHI ,MAC Address111" line.long (0x2F8+0x04) "MAC_ADDRESS111_LOW,MAC Address111 Low Register" line.long 0x300 "MAC_ADDRESS112_HIGH,MAC Address112 High Register" bitfld.long 0x300 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x300 30. " SA ,Source Address" "DA,SA" bitfld.long 0x300 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x300 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x300 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x300 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x300 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x300 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x300 0.--15. 1. " ADDRHI ,MAC Address112" line.long (0x300+0x04) "MAC_ADDRESS112_LOW,MAC Address112 Low Register" line.long 0x308 "MAC_ADDRESS113_HIGH,MAC Address113 High Register" bitfld.long 0x308 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x308 30. " SA ,Source Address" "DA,SA" bitfld.long 0x308 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x308 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x308 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x308 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x308 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x308 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x308 0.--15. 1. " ADDRHI ,MAC Address113" line.long (0x308+0x04) "MAC_ADDRESS113_LOW,MAC Address113 Low Register" line.long 0x310 "MAC_ADDRESS114_HIGH,MAC Address114 High Register" bitfld.long 0x310 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x310 30. " SA ,Source Address" "DA,SA" bitfld.long 0x310 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x310 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x310 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x310 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x310 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x310 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x310 0.--15. 1. " ADDRHI ,MAC Address114" line.long (0x310+0x04) "MAC_ADDRESS114_LOW,MAC Address114 Low Register" line.long 0x318 "MAC_ADDRESS115_HIGH,MAC Address115 High Register" bitfld.long 0x318 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x318 30. " SA ,Source Address" "DA,SA" bitfld.long 0x318 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x318 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x318 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x318 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x318 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x318 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x318 0.--15. 1. " ADDRHI ,MAC Address115" line.long (0x318+0x04) "MAC_ADDRESS115_LOW,MAC Address115 Low Register" line.long 0x320 "MAC_ADDRESS116_HIGH,MAC Address116 High Register" bitfld.long 0x320 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x320 30. " SA ,Source Address" "DA,SA" bitfld.long 0x320 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x320 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x320 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x320 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x320 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x320 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x320 0.--15. 1. " ADDRHI ,MAC Address116" line.long (0x320+0x04) "MAC_ADDRESS116_LOW,MAC Address116 Low Register" line.long 0x328 "MAC_ADDRESS117_HIGH,MAC Address117 High Register" bitfld.long 0x328 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x328 30. " SA ,Source Address" "DA,SA" bitfld.long 0x328 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x328 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x328 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x328 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x328 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x328 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x328 0.--15. 1. " ADDRHI ,MAC Address117" line.long (0x328+0x04) "MAC_ADDRESS117_LOW,MAC Address117 Low Register" line.long 0x330 "MAC_ADDRESS118_HIGH,MAC Address118 High Register" bitfld.long 0x330 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x330 30. " SA ,Source Address" "DA,SA" bitfld.long 0x330 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x330 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x330 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x330 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x330 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x330 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x330 0.--15. 1. " ADDRHI ,MAC Address118" line.long (0x330+0x04) "MAC_ADDRESS118_LOW,MAC Address118 Low Register" line.long 0x338 "MAC_ADDRESS119_HIGH,MAC Address119 High Register" bitfld.long 0x338 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x338 30. " SA ,Source Address" "DA,SA" bitfld.long 0x338 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x338 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x338 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x338 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x338 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x338 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x338 0.--15. 1. " ADDRHI ,MAC Address119" line.long (0x338+0x04) "MAC_ADDRESS119_LOW,MAC Address119 Low Register" line.long 0x340 "MAC_ADDRESS120_HIGH,MAC Address120 High Register" bitfld.long 0x340 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x340 30. " SA ,Source Address" "DA,SA" bitfld.long 0x340 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x340 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x340 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x340 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x340 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x340 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x340 0.--15. 1. " ADDRHI ,MAC Address120" line.long (0x340+0x04) "MAC_ADDRESS120_LOW,MAC Address120 Low Register" line.long 0x348 "MAC_ADDRESS121_HIGH,MAC Address121 High Register" bitfld.long 0x348 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x348 30. " SA ,Source Address" "DA,SA" bitfld.long 0x348 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x348 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x348 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x348 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x348 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x348 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x348 0.--15. 1. " ADDRHI ,MAC Address121" line.long (0x348+0x04) "MAC_ADDRESS121_LOW,MAC Address121 Low Register" line.long 0x350 "MAC_ADDRESS122_HIGH,MAC Address122 High Register" bitfld.long 0x350 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x350 30. " SA ,Source Address" "DA,SA" bitfld.long 0x350 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x350 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x350 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x350 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x350 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x350 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x350 0.--15. 1. " ADDRHI ,MAC Address122" line.long (0x350+0x04) "MAC_ADDRESS122_LOW,MAC Address122 Low Register" line.long 0x358 "MAC_ADDRESS123_HIGH,MAC Address123 High Register" bitfld.long 0x358 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x358 30. " SA ,Source Address" "DA,SA" bitfld.long 0x358 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x358 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x358 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x358 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x358 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x358 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x358 0.--15. 1. " ADDRHI ,MAC Address123" line.long (0x358+0x04) "MAC_ADDRESS123_LOW,MAC Address123 Low Register" line.long 0x360 "MAC_ADDRESS124_HIGH,MAC Address124 High Register" bitfld.long 0x360 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x360 30. " SA ,Source Address" "DA,SA" bitfld.long 0x360 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x360 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x360 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x360 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x360 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x360 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x360 0.--15. 1. " ADDRHI ,MAC Address124" line.long (0x360+0x04) "MAC_ADDRESS124_LOW,MAC Address124 Low Register" line.long 0x368 "MAC_ADDRESS125_HIGH,MAC Address125 High Register" bitfld.long 0x368 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x368 30. " SA ,Source Address" "DA,SA" bitfld.long 0x368 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x368 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x368 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x368 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x368 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x368 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x368 0.--15. 1. " ADDRHI ,MAC Address125" line.long (0x368+0x04) "MAC_ADDRESS125_LOW,MAC Address125 Low Register" line.long 0x370 "MAC_ADDRESS126_HIGH,MAC Address126 High Register" bitfld.long 0x370 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x370 30. " SA ,Source Address" "DA,SA" bitfld.long 0x370 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x370 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x370 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x370 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x370 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x370 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x370 0.--15. 1. " ADDRHI ,MAC Address126" line.long (0x370+0x04) "MAC_ADDRESS126_LOW,MAC Address126 Low Register" line.long 0x378 "MAC_ADDRESS127_HIGH,MAC Address127 High Register" bitfld.long 0x378 31. " AE ,Address Enable" "Disabled,Enabled" bitfld.long 0x378 30. " SA ,Source Address" "DA,SA" bitfld.long 0x378 29. " MBC5 ,Mask Byte Control 5" "Not masked,Masked" textline " " bitfld.long 0x378 28. " MBC4 ,Mask Byte Control 4" "Not masked,Masked" bitfld.long 0x378 27. " MBC3 ,Mask Byte Control 3" "Not masked,Masked" bitfld.long 0x378 26. " MBC2 ,Mask Byte Control 2" "Not masked,Masked" textline " " bitfld.long 0x378 25. " MBC1 ,Mask Byte Control 1" "Not masked,Masked" bitfld.long 0x378 24. " MBC0 ,Mask Byte Control 0" "Not masked,Masked" hexmask.long.word 0x378 0.--15. 1. " ADDRHI ,MAC Address127" line.long (0x378+0x04) "MAC_ADDRESS127_LOW,MAC Address127 Low Register" tree.end tree.end width 42. tree "DMA Registers" group.long 0x1000++0x0B line.long 0x00 "BUS_MODE,Bus Mode Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " RIB ,Rebuild INCRx Burst" "No rebuild,Rebuild" bitfld.long 0x00 28.--29. " PRWG ,Channel Priority Weights" "1,2,3,4" bitfld.long 0x00 27. " TXPR ,Transmit Priority" "Below DMA,Above DMA" textline " " bitfld.long 0x00 26. " MB ,Mixed Bursts" "Disabled,Enabled" textline " " endif bitfld.long 0x00 25. " AAL ,Address Aligned Beats" "Disabled,Enabled" bitfld.long 0x00 24. " 8XPBL ,8xPBL Mode" "Disabled,Enabled" bitfld.long 0x00 23. " USP ,Use Seperate PBL" "Disabled,Enabled" textline " " bitfld.long 0x00 17.--22. " RPBL ,Rx DMA PBL" ",1,2,,4,,,,8,,,,,,,,16,,,,,,,,,,,,,,,,32,?..." bitfld.long 0x00 16. " FB ,Fixed Burst" "Single or Increment,Fixed" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 14.--15. " PR ,Priority Ratio" "1 to 1,2 to 1,3 to 1,4 to 1" textline " " endif bitfld.long 0x00 8.--13. " PBL ,Programmable Burst Length" ",1,2,,4,,,,8,,,,,,,,16,,,,,,,,,,,,,,,,32,?..." bitfld.long 0x00 7. " ATDS ,Alternate Descriptor Size" "16 bytes,32 bytes" bitfld.long 0x00 2.--6. " DSL ,Descriptor Skip Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 1. " DA ,DMA Arbitration Scheme" "Weighted round-robin,Fixed priority" textline " " endif bitfld.long 0x00 0. " SWR ,Software Reset" "No reset,Reset" line.long 0x04 "TRANSMIT_POLL_DEMAND,Transmit Poll Demand Register" line.long 0x08 "RECEIVE_POLL_DEMAND,Receive Poll Demand Register" if (d.l(ad:0xFF702000+0x1018)&0x02)==0x02 rgroup.long 0x100C++0x03 line.long 0x00 "RECEIVE_DESCRIPTOR_LIST_ADDRESS,Receive Descriptor List Address Register" hexmask.long 0x00 2.--31. 0x04 " RDESLA_32BIT ,Start of Receive List" else group.long 0x100C++0x03 line.long 0x00 "RECEIVE_DESCRIPTOR_LIST_ADDRESS,Receive Descriptor List Address Register" hexmask.long 0x00 2.--31. 0x04 " RDESLA_32BIT ,Start of Receive List" endif if (d.l(ad:0xFF702000+0x1018)&0x2000)==0x2000 rgroup.long 0x1010++0x03 line.long 0x00 "TRANSMIT_DESCRIPTOR_LIST_ADDRESS,Transmit Descriptor List Address Register" hexmask.long 0x00 2.--31. 0x04 " TDESLA_32BIT ,Start of Transmit List" else group.long 0x1010++0x03 line.long 0x00 "TRANSMIT_DESCRIPTOR_LIST_ADDRESS,Transmit Descriptor List Address Register" hexmask.long 0x00 2.--31. 0x04 " TDESLA_32BIT ,Start of Transmit List" endif if (((d.l(ad:0xFF702000+0x1014))&0x20000)==0x20000) group.long 0x1014++0x03 line.long 0x00 "STATUS,Status Register" rbitfld.long 0x00 30. " GLPII ,GMAC LPI Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 29. " TTI ,Timestamp Trigger Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 28. " GPI ,GMAC PMT Interrupt" "No interrupt,Interrupt" textline " " endif rbitfld.long 0x00 27. " GMI ,GMAC MMC Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 26. " GLI ,GMAC Line interface Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 25. " EB2 ,Error Bit 2" "Data buffer access,Descriptor access" textline " " rbitfld.long 0x00 24. " EB1 ,Error Bit 1" "Write transfer,Read transfer" rbitfld.long 0x00 23. " EB0 ,Error Bit 0" "Data transfer by RxDMA,Data transfer by TxDMA" rbitfld.long 0x00 20.--22. " TS ,Transmit Process State" "Stopped,Running: Fetching,Running: Waiting,Running: Reading,TIME_STAMP write,,Suspended,Running: Closing" textline " " rbitfld.long 0x00 17.--19. " RS ,Received Process State" "Stopped,Running: Fetching,,Running: Waiting,Suspended,Running: Closing,TIME_STAMP write,Running: Transferring" eventfld.long 0x00 16. " NIS ,Normal Interrupt Summary" "Low,High" eventfld.long 0x00 15. " AIS ,Abnormal Interrupt Summary" "Low,High" textline " " bitfld.long 0x00 14. " ERI ,Early Receive Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " FBI ,Fatal Bus Error Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 10. " ETI ,Early Transmit Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " RWT ,Receive Watchdog Timeout" "No timeout,Timeout" bitfld.long 0x00 8. " RPS ,Receive Process Stopped" "Not stopped,Stopped" bitfld.long 0x00 7. " RU ,Receive Buffer Unavailable" "Available,Unavailable" textline " " bitfld.long 0x00 6. " RI ,Receive Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 5. " UNF ,Transmit Underflow" "No underflow,Underflow" bitfld.long 0x00 4. " OVF ,Receive Overflow" "No overflow,Overflow" textline " " bitfld.long 0x00 3. " TJT ,Transmit Jabber Timeout" "No timeout,Timeout" bitfld.long 0x00 2. " TU ,Transmit Buffer Unavailable" "No,Yes" bitfld.long 0x00 1. " TPS ,Transmit Process Stopped" "Not stopped,Stopped" textline " " bitfld.long 0x00 0. " TI ,Transmit Interrupt" "No interrupt,Interrupt" else group.long 0x1014++0x03 line.long 0x00 "STATUS,Status Register" rbitfld.long 0x00 30. " GLPII ,GMAC LPI Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 29. " TTI ,Timestamp Trigger Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 28. " GPI ,GMAC PMT Interrupt" "No interrupt,Interrupt" textline " " endif rbitfld.long 0x00 27. " GMI ,GMAC MMC Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 26. " GLI ,GMAC Line interface Interrupt" "No interrupt,Interrupt" textline " " rbitfld.long 0x00 20.--22. " TS ,Transmit Process State" "Stopped,Running: Fetching,Running: Waiting,Running: Reading,TIME_STAMP write,,Suspended: Transmit,Running: Closing" textline " " rbitfld.long 0x00 17.--19. " RS ,Received Process State" "Stopped,Running: Fetching,,Running: Waiting,Suspended: Receive,Running: Closing,TIME_STAMP write,Running: Transferring" eventfld.long 0x00 16. " NIS ,Normal Interrupt Summary" "Low,High" eventfld.long 0x00 15. " AIS ,Abnormal Interrupt Summary" "Low,High" textline " " bitfld.long 0x00 14. " ERI ,Early Receive Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " FBI ,Fatal Bus Error Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 10. " ETI ,Early Transmit Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " RWT ,Receive Watchdog Timeout" "No timeout,Timeout" bitfld.long 0x00 8. " RPS ,Receive Process Stopped" "Not stopped,Stopped" bitfld.long 0x00 7. " RU ,Receive Buffer Unavailable" "Available,Unavailable" textline " " bitfld.long 0x00 6. " RI ,Receive Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 5. " UNF ,Transmit Underflow" "No underflow,Underflow" bitfld.long 0x00 4. " OVF ,Receive Overflow" "No overflow,Overflow" textline " " bitfld.long 0x00 3. " TJT ,Transmit Jabber Timeout" "No timeout,Timeout" bitfld.long 0x00 2. " TU ,Transmit Buffer Unavailable" "No,Yes" bitfld.long 0x00 1. " TPS ,Transmit Process Stopped" "Not stopped,Stopped" textline " " bitfld.long 0x00 0. " TI ,Transmit Interrupt" "No interrupt,Interrupt" endif group.long 0x1018++0x07 line.long 0x00 "OPERATION_MODE,Operation Mode Register" bitfld.long 0x00 26. " DT ,Disable Dropping of TCP/IP Checksum Error Frames" "No,Yes" bitfld.long 0x00 25. " RSF ,Read Rx FIFO only after complete frame" "Disabled,Enabled" bitfld.long 0x00 24. " DFF ,Disable Flushing of Received Frames" "No,Yes" textline " " bitfld.long 0x00 21. " TSF ,Transmit Store and Forward" "Disabled,Enabled" bitfld.long 0x00 20. " FTF ,Flush Transmit FIFO" "Not flushed,Flushed" textline " " bitfld.long 0x00 14.--16. " TTC ,Transmit Threshold Control" "64,128,192,256,40,32,24,16" bitfld.long 0x00 13. " ST ,Start Transmission Command" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 11.--12. 22. " RFD ,MSB of Threshold for Deactivating Flow Control" "FULL - 1KB,FULL - 2KB,FULL - 3KB,FULL - 4KB,FULL - 5KB,FULL - 6KB,FULL - 7KB,?..." rbitfld.long 0x00 9.--10. 23. " RFA ,MSB of Threshold for Activating Flow Control" "FULL - 1KB,FULL - 2KB,FULL - 3KB,FULL - 4KB,FULL - 5KB,FULL - 6KB,FULL - 7KB,?..." textline " " else bitfld.long 0x00 11.--12. " RFD ,MSB of Threshold for Deactivating Flow Control" "FULL - 1KB,FULL - 2KB,FULL - 3KB,FULL - 4KB" bitfld.long 0x00 9.--10. " RFA ,MSB of Threshold for Activating Flow Control" "FULL - 1KB,FULL - 2KB,FULL - 3KB,FULL - 4KB" textline " " bitfld.long 0x00 8. " EFC ,Enable HW Flow Control" "Disabled,Enabled" textline " " endif bitfld.long 0x00 7. " FEF ,Forward Error Frames" "Disabled,Enabled" bitfld.long 0x00 6. " FUF ,Forward Undersized Good Frames" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " DGF ,Drop Giant Frames" "Disabled,Enabled" textline " " endif bitfld.long 0x00 3.--4. " RTC ,Receive Threshold Control" "64,32,96,128" bitfld.long 0x00 2. " OSF ,Operate on Second Frame" "Disabled,Enabled" bitfld.long 0x00 1. " SR ,Start or Stop Receive" "Stopped,Started" line.long 0x04 "INTERRUPT_ENABLE,Interrupt Enable Register" bitfld.long 0x04 16. " NIE ,Normal Interrupt Summary Enable" "Disabled,Enabled" bitfld.long 0x04 15. " AIE ,Abnormal Interrupt Summary Enable" "Disabled,Enabled" bitfld.long 0x04 14. " ERE ,Early Receive Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 13. " FBE ,Fatal Bus Error Enable" "Disabled,Enabled" bitfld.long 0x04 10. " ETE ,Early Transmit Interrupt Enable" "Disabled,Enabled" bitfld.long 0x04 9. " RWE ,Receive Watchdog Timeout Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 8. " RSE ,Receive Stopped Enable" "Disabled,Enabled" bitfld.long 0x04 7. " RUE ,Receive Buffer Unavailable Enable" "Disabled,Enabled" bitfld.long 0x04 6. " RIE ,Receive Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 5. " UNE ,Underflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x04 4. " OVE ,Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x04 3. " TJE ,Transmit Jabber Timeout Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 2. " TUE ,Transmit Buffer Unavailable Enable" "Disabled,Enabled" bitfld.long 0x04 1. " TSE ,Transmit Stopped Enable" "Disabled,Enabled" bitfld.long 0x04 0. " TIE ,Transmit Interrupt Enable" "Disabled,Enabled" rgroup.long 0x1020++0x03 line.long 0x00 "MISSED_FRAME_AND_BUFFER_OVERFLOW_COUNTER,Missed Frame and Buffer Overflow Counter Register" bitfld.long 0x00 28. " OVFCNTOVF ,Overflow bit for FIFO Overflow Counter" "Not overflowed,Overflowed" hexmask.long.word 0x00 17.--27. 1. " OVFFRMCNT ,Number of frames missed by the application" textline " " bitfld.long 0x00 16. " MISCNTOVF ,Overflow bit for Missed Frame Counter" "Not overflowed,Overflowed" hexmask.long.word 0x00 0.--15. 1. " MISFRMCNT ,Number of frames missed by the controller" group.long 0x1024++0x07 line.long 0x00 "RECEIVE_INTERRUPT_WATCHDOG_TIMER,Receive Interrupt Watchdog Timer Register" hexmask.long.byte 0x00 0.--7. 1. " RIWT ,RI Watchdog Timer Count" line.long 0x04 "AXI_BUS_MODE, AXI Bus Mode Register" bitfld.long 0x04 31. " EN_LPI ,Enable Low Power Interface" "Disabled,Enabled" bitfld.long 0x04 30. " LPI_XIT_FRM ,Exit LPI Mode with Magic Packet" "Disabled,Enabled" bitfld.long 0x04 20.--23. " WR_OSR_LMT ,AXI Maximum Write OutStanding Request Limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x04 16.--19. " RD_OSR_LMT ,AXI Maximum Read OutStanding Request Limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 13. " ONEKBBE ,1 KB Boundary Crossing Enable for the GMAC-AXI Master" "Disabled,Enabled" rbitfld.long 0x04 12. " AXI_AAL ,Address-Aligned burst transfers" "Disabled,Enabled" textline " " bitfld.long 0x04 3. " BLEN16 ,AXI Burst Length 16" "Disabled,Enabled" bitfld.long 0x04 2. " BLEN8 ,AXI Burst Length 8" "Disabled,Enabled" bitfld.long 0x04 1. " BLEN4 ,AXI Burst Length 4" "Disabled,Enabled" textline " " rbitfld.long 0x04 0. " UNDEF ,AXI Undefined Burst Length" "Disabled,Enabled" rgroup.long 0x102C++0x03 line.long 0x00 "AHB_OR_AXI_STATUS,AHB or AXI Status Register" bitfld.long 0x00 1. " AXIRDSTS ,AXI Master Read Channel Status" "Not activated,Activated" bitfld.long 0x00 0. " AXWHSTS ,AXI Master Write Channel or AHB Master Status" "Not activated,Activated" rgroup.long 0x1048++0x13 line.long 0x00 "CURRENT_HOST_TRANSMIT_DESCRIPTOR,Current Host Transmit Descriptor Register" line.long 0x04 "CURRENT_HOST_RECEIVE_DESCRIPTOR,Current Host Receive Descriptor Register" line.long 0x08 "CURRENT_HOST_TRANSMIT_BUFFER_ADDRESS,Current Host Transmit Buffer Address Register" line.long 0x0C "CURRENT_HOST_RECEIVE_BUFFER_ADDRESS,Current Host Receive Buffer Address Register" line.long 0x10 "HW_FEATURE,HW Feature Register" bitfld.long 0x10 28.--30. " ACTPHYIF ,Active or Selected PHY interface" "GMII or MII,RGMII,SGMII,TBI,RMII,RTBI,SMII,RevMII" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x10 27. " SAVLANINS ,Source Address or VLAN Insertion" "Disabled,Enabled" bitfld.long 0x10 26. " FLEXIPPSEN ,Flexible Pulse-Per-Second Output" "Disabled,Enabled" bitfld.long 0x10 25. " INTTSEN ,Timestamping with Internal System Time" "Disabled,Enabled" textline " " endif bitfld.long 0x10 24. " ENHDESSEL ,Enhanced Descriptor Select" "Disabled,Enabled" bitfld.long 0x10 22.--23. " TXCHCNT ,Number of additional Tx channels" "0,1,2,3" textline " " bitfld.long 0x10 20.--21. " RXCHCNT ,Number of additional Rx channels" "0,1,2,3" bitfld.long 0x10 19. " RXFIFOSIZE ,Rx FIFO > 2,048 Bytes" "Disabled,Enabled" bitfld.long 0x10 18. " RXTYP2COE ,Rx Type 2 Checksum Offload" "Disabled,Enabled" textline " " bitfld.long 0x10 17. " RXTYP1COE ,Rx Type 1 Checksum Offload" "Disabled,Enabled" bitfld.long 0x10 16. " TXCOESEL ,Checksum Offload in Tx" "Disabled,Enabled" bitfld.long 0x10 15. " AVSEL ,AV Feature" "Disabled,Enabled" textline " " bitfld.long 0x10 14. " EEESEL ,Energy Efficient Ethernet" "Disabled,Enabled" bitfld.long 0x10 13. " TSVER2SEL ,IEEE 1588-2008 Advanced Timestamp" "Disabled,Enabled" bitfld.long 0x10 12. " TSVER1SEL ,Only IEEE 1588-2002 Timestamp" "Disabled,Enabled" textline " " bitfld.long 0x10 11. " MMCSEL ,RMON Module" "Disabled,Enabled" bitfld.long 0x10 10. " MGKSEL ,PMT Magic Packet" "Disabled,Enabled" textline " " bitfld.long 0x10 9. " RWKSEL ,PMT Remote Wakeup" "Disabled,Enabled" bitfld.long 0x10 8. " SMASEL ,SMA (MDIO) Interface" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x10 7. " L3L4FLTREN ,Layer 3 and Layer 4 Filter Feature" "Disabled,Enabled" textline " " endif bitfld.long 0x10 6. " PCSSEL ,PCS registers" "Disabled,Enabled" bitfld.long 0x10 5. " ADDMACADRSEL ,Multiple MAC Address Registers" "Disabled,Enabled" bitfld.long 0x10 4. " HASHSEL ,HASH Filter" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x10 3. " EXTHASHEN ,Expanded DA Hash Filter" "Disabled,Enabled" textline " " endif bitfld.long 0x10 2. " HDSEL ,Half-Duplex support" "Disabled,Enabled" bitfld.long 0x10 1. " GMIISEL ,1000 Mbps support" "Disabled,Enabled" bitfld.long 0x10 0. " MIISEL ,10 or 100 Mbps support" "Disabled,Enabled" tree.end width 0x0B tree.end tree.end tree "SDMMC (Secure Digital/MultiMediaCard)" base ad:0xFF704000 width 9. group.long 0x00++0x0B line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 25. " USE_INTERNAL_DMAC ,SD/MMC DMA use" "Slave interface,Internal DMA" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 24. " ENABLE_OD_PULLUP ,External open-drain pullup enable" "Disabled,Enabled" bitfld.long 0x00 20.--23. " CARD_VOLTAGE_B ,Card regulator-B voltage setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " CARD_VOLTAGE_A ,Card regulator-A voltage setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " endif bitfld.long 0x00 11. " CEATA_DEVICE_INTERRUPT_STATUS ,CEATA device interrupt status" "Disabled,Enabled" bitfld.long 0x00 10. " SEND_AUTO_STOP_CCSD ,Send auto stop ccsd" "Clear,Send" bitfld.long 0x00 9. " SEND_CCSD ,Send ccsd" "Clear,Send" textline " " bitfld.long 0x00 8. " ABORT_READ_DATA ,Abort read data" "No change,Abort read" bitfld.long 0x00 7. " SEND_IRQ_RESPONSE ,Send irq response" "Not send,Send" bitfld.long 0x00 6. " READ_WAIT ,Read wait" "No wait,Wait" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " DMA_ENABLE ,DMA Transfer Mode enable" "Disabled,Enabled" textline " " endif bitfld.long 0x00 4. " INT_ENABLE ,Global interrupt enable/disable bit" "Disabled,Enabled" bitfld.long 0x00 2. " DMA_RESET ,Dma_reset" "No reset,Reset" bitfld.long 0x00 1. " FIFO_RESET ,Fifo reset" "No reset,Reset" textline " " bitfld.long 0x00 0. " CONTROLLER_RESET ,Controller reset" "No reset,Reset" line.long 0x04 "PWREN,Power Enable Register" bitfld.long 0x04 0. " POWER_ENABLE ,Power on/off switch for card" "Power off,Power on" line.long 0x08 "CLKDIV,Clock Divider Register" sif cpu()=="ARRIA10SOC" hexmask.long.byte 0x08 24.--31. 1. " CLK_DIVIDER3 ,Clock divider-3 value" hexmask.long.byte 0x08 16.--23. 1. " CLK_DIVIDER2 ,Clock divider-2 value" hexmask.long.byte 0x08 8.--15. 1. " CLK_DIVIDER1 ,Clock divider-1 value" textline " " endif hexmask.long.byte 0x08 0.--7. 1. " CLK_DIVIDER0 ,Clock divider-0 value" sif cpu()=="ARRIA10SOC" hgroup.long 0x0C++0x03 hide.long 0x00 "CLKSRC,SD Clock Source Register" else group.long 0x0C++0x03 line.long 0x00 "CLKSRC,SD Clock Source Register" bitfld.long 0x00 0.--1. " CLK_SOURCE ,Clock divider source for SD card" "0,1,2,3" endif group.long 0x10++0x1F line.long 0x00 "CLKENA,Clock Enable Register" bitfld.long 0x00 16. " CCLK_LOW_POWER ,Low-power control for SD card clock" "Non-low-power,Low-power" bitfld.long 0x00 0. " CCLK_ENABLE ,Clock-enable control for SD card clock" "Disabled,Enabled" line.long 0x04 "TMOUT,Time-out Register" hexmask.long.tbyte 0x04 8.--31. 1. " DATA_TIMEOUT ,Value for card Data Read time-out" hexmask.long.byte 0x04 0.--7. 1. " RESPONSE_TIMEOUT ,Response time-out value" line.long 0x08 "CTYPE,Card Type Register" bitfld.long 0x08 16. " CARD_WIDTH1 ,Indicates if card is 8-bit" "Non 8-bit,8-bit" bitfld.long 0x08 0. " CARD_WIDTH0 ,Indicates if card is 1-bit or 4-bit" "1-bit,4-bit" line.long 0x0C "BLKSIZ,Block Size Register" hexmask.long.word 0x0C 0.--15. 1. " BLOCK_SIZE ,Block size" line.long 0x10 "BYTCNT,Byte Count Register" line.long 0x14 "INTMASK,Interrupt Mask Register" bitfld.long 0x14 16. " SDIO_INT_MASK ,Mask SDIO interrupt" "Masked,Not masked" bitfld.long 0x14 15. " EBE ,End-bit error (read)/Write no CRC" "Masked,Not masked" bitfld.long 0x14 14. " ACD ,Auto command done" "Masked,Not masked" textline " " bitfld.long 0x14 13. " SBE ,Start-bit error" "Masked,Not masked" bitfld.long 0x14 12. " HLE ,Hardware locked write error" "Masked,Not masked" bitfld.long 0x14 11. " FRUN ,FIFO underrun/overrun error" "Masked,Not masked" textline " " bitfld.long 0x14 10. " HTO ,Data starvation-by-host time-out (HTO) /Volt_switch_int" "Masked,Not masked" bitfld.long 0x14 9. " DRTO ,Data read time-out" "Masked,Not masked" bitfld.long 0x14 8. " RTO ,Response time-out" "Masked,Not masked" textline " " bitfld.long 0x14 7. " DCRC ,Data CRC error" "Masked,Not masked" bitfld.long 0x14 6. " RCRC ,Response CRC error" "Masked,Not masked" bitfld.long 0x14 5. " RXDR ,Receive FIFO data request" "Masked,Not masked" textline " " bitfld.long 0x14 4. " TXDR ,Transmit FIFO data request" "Masked,Not masked" bitfld.long 0x14 3. " DTO ,Data transfer over" "Masked,Not masked" bitfld.long 0x14 2. " CMD ,Command done" "Masked,Not masked" textline " " bitfld.long 0x14 1. " RE ,Response error" "Masked,Not masked" bitfld.long 0x14 0. " CD ,Card detected" "Masked,Not masked" line.long 0x18 "CMDARG,Command Argument Register" line.long 0x1C "CMD,Command Register" bitfld.long 0x1C 31. " START_CMD ,Start command" "Disabled,Enabled" bitfld.long 0x1C 29. " USE_HOLD_REG ,Use Hold Reg" "Bypassed,Not bypassed" bitfld.long 0x1C 28. " VOLT_SWITCH ,Voltage switch bit" "Disabled,Enabled" textline " " bitfld.long 0x1C 27. " BOOT_MODE ,Boot Mode" "Mandatory,Alternate" bitfld.long 0x1C 26. " DISABLE_BOOT ,Disable Boot" "No,Yes" bitfld.long 0x1C 25. " EXPECT_BOOT_ACK ,Expect Boot Acknowledge" "Not expected,Expected" textline " " bitfld.long 0x1C 24. " ENABLE_BOOT ,Enable Boot" "Disabled,Enabled" bitfld.long 0x1C 23. " CCS_EXPECTED ,CCS expected" "Disabled,Enabled" bitfld.long 0x1C 22. " READ_CEATA_DEVICE ,Read ceata device" "Not performing,Performing" textline " " bitfld.long 0x1C 21. " UPDATE_CLOCK_REGISTERS_ONLY ,Update clock registers only" "Normal,Update" bitfld.long 0x1C 16.--20. " CARD_NUMBER ,Conrd number in use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,?..." bitfld.long 0x1C 15. " SEND_INITIALIZATION ,Send initialization" "Not send,Send" textline " " bitfld.long 0x1C 14. " STOP_ABORT_CMD ,Stop abort cmd" "Neither stop,Stop" bitfld.long 0x1C 13. " WAIT_PRVDATA_COMPLETE ,Wait for previous data transfer completion before sending command" "Disabled,Enabled" bitfld.long 0x1C 12. " SEND_AUTO_STOP ,Send auto stop" "Not send,Send" textline " " bitfld.long 0x1C 11. " TRANSFER_MODE ,Transfer mode" "Block,Stream" bitfld.long 0x1C 10. " READ_WRITE ,Read/write" "Read,Write" bitfld.long 0x1C 9. " DATA_EXPECTED ,Data expected" "Not expected,Expected" textline " " bitfld.long 0x1C 8. " CHECK_RESPONSE_CRC ,Check response CRC" "Not checked,Checked" bitfld.long 0x1C 7. " RESPONSE_LENGTH ,Response length" "Short,Long" bitfld.long 0x1C 6. " RESPONSE_EXPECT ,Response expect" "Not expected,Expected" textline " " bitfld.long 0x1C 0.--5. " CMD_INDEX ,Command index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,?..." rgroup.long 0x30++0x0F line.long 0x0 "RESP0,Response Register 0" line.long 0x4 "RESP1,Response Register 1" line.long 0x8 "RESP2,Response Register 2" line.long 0xC "RESP3,Response Register 3" width 9. rgroup.long 0x40++0x03 line.long 0x00 "MINTSTS,Masked Interrupt Status Register" bitfld.long 0x00 16. " SDIO_INTERRUPT ,Interrupt from SDIO card" "Masked,Not masked" bitfld.long 0x00 15. " EBE ,End-bit error" "Masked,Not masked" bitfld.long 0x00 14. " ACD ,Auto command done" "Masked,Not masked" textline " " bitfld.long 0x00 13. " STRERR ,Start-bit error" "Masked,Not masked" bitfld.long 0x00 12. " HLWERR ,Hardware locked write error" "Masked,Not masked" bitfld.long 0x00 11. " FIFOOVUNERR ,FIFO underrun/overrun error" "Masked,Not masked" textline " " bitfld.long 0x00 10. " DSHTO ,Data starvation-by-host time-out" "Masked,Not masked" bitfld.long 0x00 9. " DATARDTO ,Data read time-out" "Masked,Not masked" bitfld.long 0x00 8. " RESPTO ,Response time-out" "Masked,Not masked" textline " " bitfld.long 0x00 7. " DATACRCERR ,Data CRC error" "Masked,Not masked" bitfld.long 0x00 6. " RESPCRCERR ,Response CRC error" "Masked,Not masked" bitfld.long 0x00 5. " RXFIFODR ,Receive FIFO data request" "Masked,Not masked" textline " " bitfld.long 0x00 4. " DTTXFIFODR ,Transmit FIFO data request" "Masked,Not masked" bitfld.long 0x00 3. " DT ,Data transfer over" "Masked,Not masked" bitfld.long 0x00 2. " CMD_DONE ,Command done" "Masked,Not masked" textline " " bitfld.long 0x00 1. " RESP ,Response error" "Masked,Not masked" bitfld.long 0x00 0. " CD ,Card detect" "Masked,Not masked" group.long 0x44++0x03 line.long 0x00 "RINTSTS,Raw Interrupt Status Register" bitfld.long 0x00 16. " SDIO_INTERRUPT ,Interrupt from SDIO card" "No interrupt,Interrupt" eventfld.long 0x00 15. " EBE ,End-bit error" "No interrupt,Interrupt" eventfld.long 0x00 14. " ACD ,Auto command done" "No interrupt,Interrupt" textline " " eventfld.long 0x00 13. " SBE ,Start-bit error" "No interrupt,Interrupt" eventfld.long 0x00 12. " HLE ,Hardware locked write error" "No interrupt,Interrupt" eventfld.long 0x00 11. " FRUN ,FIFO underrun/overrun error" "No interrupt,Interrupt" textline " " eventfld.long 0x00 10. " HTO ,Data starvation-by-host time-out" "No interrupt,Interrupt" eventfld.long 0x00 9. " BDS ,Data read time-out" "No interrupt,Interrupt" eventfld.long 0x00 8. " BAR ,Response time-out" "No interrupt,Interrupt" textline " " eventfld.long 0x00 7. " DCRC ,Data CRC error" "No interrupt,Interrupt" eventfld.long 0x00 6. " RCRC ,Response CRC error" "No interrupt,Interrupt" eventfld.long 0x00 5. " RXDR ,Receive FIFO data request" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " TXDR ,Transmit FIFO data request" "No interrupt,Interrupt" eventfld.long 0x00 3. " DTO ,Data transfer over" "No interrupt,Interrupt" eventfld.long 0x00 2. " CMD ,Command done" "No interrupt,Interrupt" textline " " eventfld.long 0x00 1. " RE ,Response error" "No interrupt,Interrupt" eventfld.long 0x00 0. " CD ,Card detect" "No interrupt,Interrupt" rgroup.long 0x48++0x03 line.long 0x00 "STATUS,Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " DMA_REQ ,DMA request signal state" "Not requested,Requested" bitfld.long 0x00 30. " DMA_ACK ,DMA acknowledge signal state" "Not acknowledged,Acknowledged" textline " " endif hexmask.long.word 0x00 17.--29. 1. " FIFO_COUNT ,FIFO count - number of filled locations in FIFO" textline " " bitfld.long 0x00 11.--16. " RESPONSE_INDEX ,Index of previous response, including any auto-stop sent by core" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 10. " DATA_STATE_MC_BUSY ,Data transmit or receive state-machine is busy" "Not busy,Busy" bitfld.long 0x00 9. " DATA_BUSY ,Inverted version of raw selected card_data" "Not busy,Busy" textline " " bitfld.long 0x00 8. " DATA_3_STATUS ,Raw selected card_data" "Not present,Present" bitfld.long 0x00 4.--7. " CMDFSMSTATES ,Command FSM states" "Idle,Send init sequence,Tx cmd start bit,Tx cmd tx bit,Tx cmd index + arg,Tx cmd crc7,Tx cmd end bit,Rx resp start bit,Rx resp IRQ response,Rx resp tx bit,Rx resp cmd idx,Rx resp data,Rx resp crc7,Rx resp end bit,Cmd path wait NCC,Wait" bitfld.long 0x00 3. " FIFO_FULL ,FIFO is full status" "Not full,Full" textline " " bitfld.long 0x00 2. " FIFO_EMPTY ,FIFO is empty status" "Not empty,Empty" bitfld.long 0x00 1. " FIFO_TX_WATERMARK ,FIFO reached Transmit watermark level" "Not reached,Reached" bitfld.long 0x00 0. " FIFO_RX_WATERMARK ,FIFO reached Receive watermark level" "Not reached,Reached" group.long 0x4C++0x03 line.long 0x00 "FIFOTH,FIFO Threshold Watermark Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 28.--30. " DMA_MTS ,Burst size of multiple transaction" "1,4,8,16,32,64,128,256" textline " " else bitfld.long 0x00 28.--30. " DMA_MTS ,Burst size of multiple transaction" "1,4,8,16,,1,4,8" textline " " endif hexmask.long.word 0x00 16.--27. 1. " RX_WMARK ,FIFO threshold watermark level when receiving data to card" hexmask.long.word 0x00 0.--11. 1. " TX_WMARK ,FIFO threshold watermark level when transmitting data to card" rgroup.long 0x50++0x07 line.long 0x00 "CDETECT,Card Detect Register" bitfld.long 0x00 0. " CARD_DETECT ,Card detect" "Detected,Not detected" line.long 0x04 "WRTPRT,Write Protect Register" bitfld.long 0x04 0. " WRITE_PROTECT ,Write protect" "Disabled,Enabled" sif cpu()=="ARRIA10SOC" group.long 0x58++0x03 line.long 0x00 "GPIO,General Purpose Input/Output Register" hexmask.long.word 0x00 8.--23. 1. " GPO ,GPO Output Value" hexmask.long.byte 0x00 0.--7. 1. " GPI ,GPI Input Value" endif rgroup.long 0x5C++0x07 line.long 0x00 "TCBCNT,Transferred CIU Card Byte Count Register" line.long 0x04 "TBBCNT,Transferred Host to BIU-FIFO Byte Count Register" group.long 0x64++0x07 line.long 0x00 "DEBNCE,Debounce Count Register" hexmask.long.tbyte 0x00 0.--23. 1. " DEBOUNCE_COUNT ,Number of host clocks (clk) used by debounce filter logic for card detect" line.long 0x04 "USRID,User ID Register" rgroup.long 0x6C++0x07 line.long 0x00 "VERID,Version ID Register" line.long 0x04 "HCON,Hardware Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x04 27. " AC ,Address Configuration" "32-bit,64-bit" textline " " endif bitfld.long 0x04 26. " ARO ,Area Optimized" "Not optimized,?..." bitfld.long 0x04 24.--25. " NCD ,Number of Clock Dividers" "One,?..." bitfld.long 0x04 23. " SCFP ,Clock False Path" ",Set" textline " " bitfld.long 0x04 22. " IHR ,Implement Hold Register" ",Implemented" bitfld.long 0x04 21. " RIOS ,FIFO RAM Location" "Outside,?..." bitfld.long 0x04 18.--20. " DMADATAWODITH ,Generic DMA Data Width" ",32-bits wide,?..." textline " " bitfld.long 0x04 16.--17. " DMAINTF ,DMA Interface Type" "None,?..." bitfld.long 0x04 10.--15. " HADDRWIDTH ,Slave Bus Address Width" ",,,,,,,,,,,,13 Bits,?..." bitfld.long 0x04 7.--9. " HDATAWIDTH ,Slave Bus Data Width" ",32 bits,?..." textline " " bitfld.long 0x04 6. " HBUS ,Slave Bus Type" "APB,?..." bitfld.long 0x04 1.--5. " NC ,Number of Cards" "1 card,?..." bitfld.long 0x04 0. " CT ,Card Type" ",SD/MMC" group.long 0x74++0x03 line.long 0x00 "UHS_REG,UHS-1 Register" bitfld.long 0x00 16. " DDR_REG ,DDR Mode" "Disabled,Enabled" bitfld.long 0x00 0. " VOLT_REG ,High Voltage Mode" "3.3V Vdd,1.8V Vdd" group.long 0x78++0x03 line.long 0x00 "RST_N,Hardware Reset" bitfld.long 0x00 0. " CARD_RESET ,Hardware reset" "No reset,Reset" group.long 0x80++0x03 line.long 0x00 "BMOD,Bus Mode Register" bitfld.long 0x00 8.--10. " PBL ,Programmable Burst Length" "1,4,8,16,32,64,128,256" bitfld.long 0x00 7. " DE ,IDMAC enable" "Disabled,Enabled" bitfld.long 0x00 2.--6. " DSL ,Descriptor Skip Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 1. " FB ,Fixed Burst" "No fixed burst,Fixed burst" bitfld.long 0x00 0. " SWR ,Software Reset" "No reset,Reset" wgroup.long 0x84++0x03 line.long 0x00 "PLDMND,Poll Demand Register" group.long 0x88++0x0B line.long 0x00 "DBADDR,Descriptor List Base Address Register" line.long 0x04 "IDSTS,Internal DMAC Status Register" rbitfld.long 0x04 13.--16. " FSM ,DMAC state machine present state" "DMA_IDLE,DMA_SUSPEND,DESC_RD,DESC_CHK,DMA_RD_REQ_WAIT,DMA_WR_REQ_WAIT,DMA_RD,DMA_WR,DESC_CLOSE,?..." rbitfld.long 0x04 10.--12. " EB ,Error Bits (host abort)" ",During transmission,During reception,?..." eventfld.long 0x04 9. " AIS ,Abnormal Interrupt Summary" "No interrupt,Interrupt" textline " " eventfld.long 0x04 8. " NIS ,Normal Interrupt Summary" "No interrupt,Interrupt" eventfld.long 0x04 5. " CES ,Card Error Summary" "No error,Error" eventfld.long 0x04 4. " DU ,Descriptor Unavailable Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x04 2. " FBE ,Fatal Bus Error Interrupt" "No interrupt,Interrupt" eventfld.long 0x04 1. " RI ,Receive Interrupt" "No interrupt,Interrupt" eventfld.long 0x04 0. " TI ,Transmit Interrupt" "No interrupt,Interrupt" line.long 0x08 "IDINTEN,Internal DMAC Interrupt Enable Register" bitfld.long 0x08 9. " AI ,Abnormal Interrupt Summary Enable" "Disabled,Enabled" bitfld.long 0x08 8. " NI ,Normal Interrupt Summary Enable" "Disabled,Enabled" bitfld.long 0x08 5. " CES ,Card Error summary Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 4. " DU ,Descriptor Unavailable Interrupt" "Disabled,Enabled" bitfld.long 0x08 2. " FBE ,Fatal Bus Error Enable" "Disabled,Enabled" bitfld.long 0x08 1. " RI ,Receive Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 0. " TI ,Transmit Interrupt Enable" "Disabled,Enabled" rgroup.long 0x94++0x07 line.long 0x00 "DSCADDR,Current Host Descriptor Address Register" line.long 0x04 "BUFADDR,Current Buffer Descriptor Address Register" width 18. group.long 0x100++0x07 line.long 0x00 "CARDTHRCTL,Card Threshold Control Register" sif cpu()=="ARRIA10SOC" hexmask.long.word 0x00 16.--28. 1. " CARDRDTHRESHOLD ,Card Read Threshold" bitfld.long 0x00 1. " BUSY_CLR_INT_EN ,Busy Clear Interrupt Enable" "Disabled,Enabled" textline " " else hexmask.long.word 0x00 16.--27. 1. " CARDRDTHRESHOLD ,Card Read Threshold" textline " " endif bitfld.long 0x00 0. " CARDRDTHREN ,Card Read Threshold Enable" "Disabled,Enabled" line.long 0x04 "BACK_END_POWER_R,Back End Power Register" hexmask.long.word 0x04 0.--15. 1. " BACK_END_POWER ,Back end power" sif cpu()=="ARRIA10SOC" group.long 0x108++0x0B line.long 0x00 "UHS_REG_EXT,UHS Register Extension" bitfld.long 0x00 30.--31. " EXT_CLK_MUX_CTRL ,Input clock control for cclk_in" "0,1,2,3" hexmask.long.byte 0x00 23.--29. 1. " CLK_DRV_PHASE_CTRL ,Control for amount of phase shift on cclk_in_drv clock" hexmask.long.byte 0x00 16.--22. 1. " CLK_SMPL_PHASE_CTRL ,Control for amount of phase shift on cclk_in_sample clock" textline " " hexmask.long.word 0x00 0.--15. 1. " MMC_VOLT_REG ,Support for 1.2V" line.long 0x04 "EMMC_DDR_REG,EMMC DDR Register" bitfld.long 0x04 0. " HALF_START_BIT ,Start bit detection control" "Full cycle,Half cycle" line.long 0x08 "ENABLE_SHIFT,Shift amount on enables control register" bitfld.long 0x08 0.--1. " ENABLE_SHIFT_CARD ,Phase shift amount control" "Default,Next posedge,Next negedge,?..." endif width 6. group.long 0x200++0x03 line.long 0x00 "DATA,Data FIFO Access" width 0x0B tree.end tree "QSPI (QSPI Flash Controller)" base ad:0xFF705000 width 19. group.long 0x00++0x2B line.long 0x00 "CFG,QSPI Configuration Register" rbitfld.long 0x00 31. " IDLE ,Serial interface and QSPI pipeline is IDLE" "Not idle,Idle" bitfld.long 0x00 19.--22. " BAUDDIV ,Master Mode Baud Rate Divisor" "Div 2,Div 4,Div 6,Div 8,Div 10,Div 12,Div 14,Div 16,Div 18,Div 20,Div 22,Div 24,Div 26,Div 28,Div 30,Div 32" bitfld.long 0x00 18. " ENTERXIPIMM ,Enter XIP Mode Immediately" "Disabled,Enabled" textline " " bitfld.long 0x00 17. " ENTERXIPEXTRD ,Enter XIP Mode on next READ" "Disabled,Enabled" bitfld.long 0x00 16. " ENAHBREMAP ,Enable AHB Address Re-mapping" "Disabled,Enabled" bitfld.long 0x00 15. " ENDMA ,Enable DMA Handshaking Logic" "Disabled,Enabled" textline " " bitfld.long 0x00 14. " WP ,Write Protect Flash Pin" "Disabled,Enabled" bitfld.long 0x00 10.--13. " PERCSLINES ,Peripheral Chip Select Lines" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 9. " PERSELDEC ,Peripheral select decode" "qspi_n_ss_out[3:0],External 4-to-16" textline " " bitfld.long 0x00 8. " ENLEGACYIP ,Legacy IP Mode Enable" "Disabled,Enabled" bitfld.long 0x00 7. " ENDIRACC ,Enable Direct Access Controller" "Disabled,Enabled" bitfld.long 0x00 2. " SELCLKPHASE ,Select Clock Phase" "Active,Inactive" textline " " bitfld.long 0x00 1. " SELCLKPOL ,Clock Polarity" "High,Low" bitfld.long 0x00 0. " EN ,QSPI Enable" "Disabled,Enabled" line.long 0x04 "DEVRD,Device Read Instruction Register" bitfld.long 0x04 24.--28. " DUMMYRDCLKS ,Dummy Read Clock Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x04 20. " ENMODEBITS ,Mode Bit Enable" "Disabled,Enabled" bitfld.long 0x04 16.--17. " DATAWIDTH ,Data Transfer Width" "Single,Dual,Quad,?..." textline " " bitfld.long 0x04 12.--13. " ADDRWIDTH ,Address Transfer Width" "Single,Dual,Quad,?..." bitfld.long 0x04 8.--9. " INSTWIDTH ,Instruction Transfer Width" "Single,Dual,Quad,?..." hexmask.long.byte 0x04 0.--7. 1. " RDOPCODE ,Read Opcode in non-XIP mode" line.long 0x08 "DEVWR,Device Write Instruction Register" bitfld.long 0x08 24.--28. " DUMMYWRCLKS ,Dummy Write Clock Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x08 16.--17. " DATAWIDTH ,Data Transfer Width" "Single,Dual,Quad,?..." bitfld.long 0x08 12.--13. " ADDRWIDTH ,Address Transfer Width" "Single,Dual,Quad,?..." textline " " hexmask.long.byte 0x08 0.--7. 1. " WROPCODE ,Write Opcode" line.long 0x0C "DELAY,QSPI Device Delay Register" hexmask.long.byte 0x0C 24.--31. 1. " NSS ,Clock Delay for Chip Select Deassert" hexmask.long.byte 0x0C 16.--23. 1. " BTWN ,Clock Delay for Chip Select Deactivation" hexmask.long.byte 0x0C 8.--15. 1. " AFTER ,Clock Delay for Last Transaction Bit" textline " " hexmask.long.byte 0x0C 0.--7. 1. " INIT ,Clock Delay with qspi_n_ss_out" line.long 0x10 "RDDATACAP,Read Data Capture Register" bitfld.long 0x10 1.--4. " DELAY ,Read Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x10 0. " BYP ,Bypass" "Not bypassed,Bypassed" line.long 0x14 "DEVSZ,Device Size Register" bitfld.long 0x14 16.--20. " BYTESPERSUBSECTOR ,Number of Bytes per Block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x14 4.--15. 1. " BYTESPERDEVICEPAGE ,Number of Bytes per Device Page" bitfld.long 0x14 0.--3. " NUMADDRBYTES ,Number of address Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x18 "SRAMPART,SRAM Partition Register" hexmask.long.byte 0x18 0.--6. 1. " ADDR ,Indirect Read Partition Size" line.long 0x1C "INDADDRTRIG,Indirect AHB Address Trigger Register" line.long 0x20 "DMAPER,DMA Peripheral Register" bitfld.long 0x20 8.--11. " NUMBURSTREQBYTES ,Number of bytes in a burst type request on the DMA peripheral request" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x20 0.--3. " NUMSGLREQBYTES ,Number of bytes in a single type request on the DMA peripheral request" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x24 "REMAPADRR,Remap Address Register" line.long 0x28 "MODEBIT,Mode Bit Register" hexmask.long.byte 0x28 0.--7. 1. " MODE ,Mode" rgroup.long 0x2C++0x3 line.long 0x00 "SRAMFILL,SRAM Fill Register" hexmask.long.word 0x00 16.--31. 1. " INDWRPART ,SRAM Fill Level (Indirect Write Partition)" hexmask.long.word 0x00 0.--15. 1. " INDRDPART ,SRAM Fill Level (Indirect Read Partition)" group.long 0x30++0x7 line.long 0x00 "TXTRESH,TX Threshold Register" bitfld.long 0x00 0.--3. " LEVEL ,Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "RXTRESH,RX Threshold Register" bitfld.long 0x04 0.--3. " LEVEL ,Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x40++0x7 line.long 0x00 "IRQSTAT,Interrupt Status Register" eventfld.long 0x00 12. " INDSRAMFULL ,Indirect Read Partition Overflow" "No interrupt,Interrupt" eventfld.long 0x00 11. " RXFULL ,Receive FIFO Full" "No interrupt,Interrupt" eventfld.long 0x00 10. " RXTRESHCMP ,Receive FIFO Compared to Threshold" "No interrupt,Interrupt" textline " " eventfld.long 0x00 9. " TXFULL ,Transmit FIFO Full" "No interrupt,Interrupt" eventfld.long 0x00 8. " TXTRESHCMP ,Transmit FIFO Compared to Threshold" "No interrupt,Interrupt" eventfld.long 0x00 7. " RXOVER ,Receive Overflow" "No interrupt,Interrupt" textline " " eventfld.long 0x00 6. " INDXFRLVL ,Transfer Watermark Reached" "No interrupt,Interrupt" eventfld.long 0x00 5. " ILLEGALACC ,Illegal AHB Access Detected" "No interrupt,Interrupt" eventfld.long 0x00 4. " PROTWRATTEMPT ,Protected Area Write Attempt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 3. " INDRDREJECT ,Indirect Read Reject" "No interrupt,Interrupt" eventfld.long 0x00 2. " INDOPDONE ,Indirect Operation Complete" "No interrupt,Interrupt" eventfld.long 0x00 1. " UNDERFLOWDET ,Underflow Detected" "No interrupt,Interrupt" sif cpu()=="ARRIA10SOC" textline " " eventfld.long 0x00 0. " MODE_M_FAIL_FLD ,Mode M Failure" "No interrupt,Interrupt" endif line.long 0x04 "IRQMASK,Interrupt Mask" bitfld.long 0x04 12. " INDSRAMFULL ,Indirect Read Partition Overflow Mask" "Masked,Not masked" bitfld.long 0x04 11. " RXFULL ,Receive FIFO Full Mask" "Masked,Not masked" bitfld.long 0x04 10. " RXTRESHCMP ,Receive FIFO Compared to Threshold Mask" "Masked,Not masked" textline " " bitfld.long 0x04 9. " TXFULL ,Transmit FIFO Full Mask" "Masked,Not masked" bitfld.long 0x04 8. " TXTRESHCMP ,Transmit FIFO Compared to Threshold Mask" "Masked,Not masked" bitfld.long 0x04 7. " RXOVER ,Receive Overflow Mask" "Masked,Not masked" textline " " bitfld.long 0x04 6. " INDXFRLVL ,Transfer Watermark Reached Mask" "Masked,Not masked" bitfld.long 0x04 5. " ILLEGALACC ,Illegal AHB Access Detected Mask" "Masked,Not masked" bitfld.long 0x04 4. " PROTWRATTEMPT ,Protected Area Write Attempt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 3. " INDRDREJECT ,Indirect Read Reject Mask" "Masked,Not masked" bitfld.long 0x04 2. " INDOPDONE ,Indirect Operation Complete Mask" "Masked,Not masked" bitfld.long 0x04 1. " UNDERFLOWDET ,Underflow Detected Mask" "Masked,Not masked" sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0. " MODE_M_FAIL_FLD ,Mode M Failure Mask" "Masked,Not masked" endif group.long 0x50++0xB line.long 0x00 "LOWWRPROT,Lower Write Protection Register" line.long 0x04 "UPPWRPROT,Upper Write Protection Register" line.long 0x08 "WRPROT,Write Protection Register" bitfld.long 0x08 1. " EN ,Write Protection Region Enable Bit" "Disabled,Enabled" bitfld.long 0x08 0. " INV ,Write Protection Region Inversion Bit" "Disabled,Enabled" group.long 0x60++0x1F line.long 0x00 "INDRD,Indirect Read Transfer Register" rbitfld.long 0x00 6.--7. " NUM_IND_OPS_DONE ,Completed Indirect Operations" "0,1,2,3" eventfld.long 0x00 5. " IND_OPS_DONE_STATUS ,Indirect Completion Status" "Not completed,Completed" rbitfld.long 0x00 4. " RD_QUEUED ,Queued Indirect Read Operations" "Not queued,Queued" textline " " eventfld.long 0x00 3. " SRAM_FULL ,SRAM Full" "Not full,Full" rbitfld.long 0x00 2. " RD_STATUS ,Indirect Read Status" "No operation,Operation" bitfld.long 0x00 1. " CANCEL ,Cancel Indirect Read" "Not canceled,Canceled" textline " " bitfld.long 0x00 0. " START ,Start Indirect Read" "Disabled,Enabled" line.long 0x04 "INDRDWATER,Indirect Read Transfer Watermark Register" line.long 0x08 "INDRDSTADDR,Indirect Read Transfer Start Address Register" line.long 0x0C "INDRDCNT,Indirect Read Transfer Number Bytes Register" line.long 0x10 "INDWR,Indirect Write Transfer Register" rbitfld.long 0x10 6.--7. " INDCNT ,Completed Indirect Operations" "0,1,2,3" eventfld.long 0x10 5. " INDDONE ,Indirect Completion Status" "Not completed,Completed" rbitfld.long 0x10 4. " RD_QUEUED ,Queued Indirect Write Operations" "Not queued,Queued" textline " " rbitfld.long 0x10 2. " RDSTAT ,Indirect Write Status" "No operation,Operation" bitfld.long 0x10 1. " CANCEL ,Cancel Indirect Write" "Not canceled,Canceled" bitfld.long 0x10 0. " START ,Start Indirect Write" "Disabled,Enabled" line.long 0x14 "INDWRWATER,Indirect Write Transfer Watermark Register" line.long 0x18 "INDWRSTADDR,Start of Indirect Access" line.long 0x1C "INDWRCNT,Indirect Number of Bytes" group.long 0x90++0x7 line.long 0x00 "FLASHCMD,Flash Command Register" hexmask.long.byte 0x00 24.--31. 1. " CMDOPCODE ,Command Opcode" bitfld.long 0x00 23. " ENRDDATA ,Read Data Enable" "Disabled,Enabled" bitfld.long 0x00 20.--22. " NUMRDDATABYTES ,Number of Read Data Bytes" "1,2,3,4,5,6,7,8" textline " " bitfld.long 0x00 19. " ENCMDADDR ,Command Address Enable" "Disabled,Enabled" bitfld.long 0x00 18. " ENMODEBIT ,Mode Bit Enable" "Disabled,Enabled" bitfld.long 0x00 16.--17. " NUMADDRBYTES ,Number of Address Bytes" "1,2,3,4" textline " " bitfld.long 0x00 15. " ENWRDATA ,Write Data Enable" "Disabled,Enabled" bitfld.long 0x00 12.--14. " NUMWRDATABYTES ,Number of Write Data Bytes" "1,2,3,4,5,6,7,8" bitfld.long 0x00 7.--11. " NUMDUMMYBYTES ,Number of Dummy Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " rbitfld.long 0x00 1. " CMDEXECSTAT ,Command Execution Status" "Not executed,Executed" bitfld.long 0x00 0. " ESECCMD ,Execute Command" "Disabled,Enabled" line.long 0x04 "FLASHCMDADDR,Flash Command Address Register" width 19. group.long 0xA0++0xF line.long 0x00 "FLASHCMDDRDDATALO,Flash Command Read Data Register (Lower)" line.long 0x04 "FLASHCMDDRDDATAUP,Flash Command Read Data Register (Upper)" line.long 0x08 "FLASHCMDWRDDATALO,Flash Command Write Data Register (Lower)" line.long 0x0C "FLASHCMDWRDDATAUP,Flash Command Write Data Register (Upper)" width 19. rgroup.long 0xFC++0x3 line.long 0x00 "MODULEID,Module ID Register" hexmask.long 0x00 0.--24. 1. " VALUE ,Module ID number" width 0x0B tree.end tree.open "FPGAM (FPGA Manager)" tree "FPGAM" base ad:0xFF706000 width 10. group.long 0x00++0x13 "FPGA Manager Module Registers" line.long 0x00 "STAT,Status Register" rbitfld.long 0x00 3.--7. " MSEL ,MSEL input" "PP16_FAST_NOAES_NODC,PP16_FAST_AES_NODC,PP16_FAST_AESOPT_DC,Reserved,PP16_SLOW_NOAES_NODC,PP16_SLOW_AES_NODC,PP16_SLOW_AESOPT_DC,Reserved,PP32_FAST_NOAES_NODC,PP32_FAST_AES_NODC,PP32_FAST_AESOPT_DC,Reserved,PP32_SLOW_NOAES_NODC,PP32_SLOW_AES_NODC,PP32_SLOW_AESOPT_DC,?..." bitfld.long 0x00 0.--2. " MODE ,FPGA Mode" "Off,Reset,Configuration,Initialization,User mode,Not determined,?..." line.long 0x04 "CTRL,Control Register" bitfld.long 0x04 9. " CFGWDTH ,Configuration Data Width" "16-bit,32-bit" bitfld.long 0x04 8. " AXICFGEN ,AXI Configuration Enable" "Disabled,Enabled" bitfld.long 0x04 6.--7. " CDRATIO ,CD Ratio" "x1,x2,x4,x8" textline " " bitfld.long 0x04 5. " PRREQ ,Partial Reconfiguration" "Not asserted,Asserted" bitfld.long 0x04 4. " CONFDONEPULL ,CONF_DONE Pull-Down" "Disabled,Enabled" bitfld.long 0x04 3. " NSTATUSPULL ,nSTATUS Pull-Down" "Disabled,Enabled" textline " " bitfld.long 0x04 2. " NCONFIGPULL ,nCONFIG Pull-Down" "Disabled,Enabled" bitfld.long 0x04 1. " NCE ,nCE" "Enabled,Disabled" bitfld.long 0x04 0. " EN ,Enable" "Disabled,Enabled" line.long 0x08 "DCLKCNT,DCLK Count Register" line.long 0x0C "DCNTSTAT,DCLK Status Register" eventfld.long 0x0C 0. " DCNTDONE ,DCLK Count Done" "Not done,Done" line.long 0x10 "GPO,General-Purpose Output Register" rgroup.long 0x14++0x7 line.long 0x00 "GPI,General-Purpose Input Register" line.long 0x04 "MISCI,Miscellaneous Input Register" bitfld.long 0x04 1. " BOOTFPGARDY ,Boot From FPGA Ready" "Not ready,Ready" bitfld.long 0x04 0. " BOOTFPGAFAIL ,Boot From FPGA on Failure" "Not boot,Boot" width 20. group.long 0x830++0xF "Configuration Monitor (MON) Registers" line.long 0x00 "GPIO_INTEN,Interrupt Enable Register" bitfld.long 0x00 11. " FPO ,FPGA_POWER_ON" "Disabled,Enabled" bitfld.long 0x00 10. " CDP ,CONF_DONE Pin" "Disabled,Enabled" bitfld.long 0x00 9. " NSP ,nSTATUS Pin" "Disabled,Enabled" textline " " bitfld.long 0x00 8. " NCP ,nCONFIG Pin" "Disabled,Enabled" bitfld.long 0x00 7. " PRD ,PR_DONE" "Disabled,Enabled" bitfld.long 0x00 6. " PRE ,PR_ERROR" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " PRR ,PR_READY" "Disabled,Enabled" bitfld.long 0x00 4. " CCD ,CVP_CONF_DONE" "Disabled,Enabled" bitfld.long 0x00 3. " CRC ,CRC_ERROR" "Disabled,Enabled" textline " " bitfld.long 0x00 2. " ID ,INIT_DONE" "Disabled,Enabled" bitfld.long 0x00 1. " CD ,CONF_DONE" "Disabled,Enabled" bitfld.long 0x00 0. " NS ,nSTATUS" "Disabled,Enabled" line.long 0x04 "GPIO_INTMASK,Interrupt Mask Register" bitfld.long 0x04 11. " FPO ,FPGA_POWER_ON" "Not masked,Masked" bitfld.long 0x04 10. " CDP ,CONF_DONE Pin" "Not masked,Masked" bitfld.long 0x04 9. " NSP ,nSTATUS Pin" "Not masked,Masked" textline " " bitfld.long 0x04 8. " NCP ,nCONFIG Pin" "Not masked,Masked" bitfld.long 0x04 7. " PRD ,PR_DONE" "Not masked,Masked" bitfld.long 0x04 6. " PRE ,PR_ERROR" "Not masked,Masked" textline " " bitfld.long 0x04 5. " PRR ,PR_READY" "Not masked,Masked" bitfld.long 0x04 4. " CCD ,CVP_CONF_DONE" "Not masked,Masked" bitfld.long 0x04 3. " CRC ,CRC_ERROR" "Not masked,Masked" textline " " bitfld.long 0x04 2. " ID ,INIT_DONE" "Not masked,Masked" bitfld.long 0x04 1. " CD ,CONF_DONE" "Not masked,Masked" bitfld.long 0x04 0. " NS ,nSTATUS" "Not masked,Masked" line.long 0x08 "GPIO_INTTYPE_LEVEL,Interrupt Level Register" bitfld.long 0x08 11. " FPO ,FPGA_POWER_ON" "Level,Edge" bitfld.long 0x08 10. " CDP ,CONF_DONE Pin" "Level,Edge" bitfld.long 0x08 9. " NSP ,nSTATUS Pin" "Level,Edge" textline " " bitfld.long 0x08 8. " NCP ,nCONFIG Pin" "Level,Edge" bitfld.long 0x08 7. " PRD ,PR_DONE" "Level,Edge" bitfld.long 0x08 6. " PRE ,PR_ERROR" "Level,Edge" textline " " bitfld.long 0x08 5. " PRR ,PR_READY" "Level,Edge" bitfld.long 0x08 4. " CCD ,CVP_CONF_DONE" "Level,Edge" bitfld.long 0x08 3. " CRC ,CRC_ERROR" "Level,Edge" textline " " bitfld.long 0x08 2. " ID ,INIT_DONE" "Level,Edge" bitfld.long 0x08 1. " CD ,CONF_DONE" "Level,Edge" bitfld.long 0x08 0. " NS ,nSTATUS" "Level,Edge" line.long 0x0C "GPIO_INT_POLARITY,Interrupt Polarity Register" bitfld.long 0x0C 11. " FPO ,FPGA_POWER_ON" "Low,High" bitfld.long 0x0C 10. " CDP ,CONF_DONE Pin" "Low,High" bitfld.long 0x0C 9. " NSP ,nSTATUS Pin" "Low,High" textline " " bitfld.long 0x0C 8. " NCP ,nCONFIG Pin" "Low,High" bitfld.long 0x0C 7. " PRD ,PR_DONE" "Low,High" bitfld.long 0x0C 6. " PRE ,PR_ERROR" "Low,High" textline " " bitfld.long 0x0C 5. " PRR ,PR_READY" "Low,High" bitfld.long 0x0C 4. " CCD ,CVP_CONF_DONE" "Low,High" bitfld.long 0x0C 3. " CRC ,CRC_ERROR" "Low,High" textline " " bitfld.long 0x0C 2. " ID ,INIT_DONE" "Low,High" bitfld.long 0x0C 1. " CD ,CONF_DONE" "Low,High" bitfld.long 0x0C 0. " NS ,nSTATUS" "Low,High" rgroup.long 0x840++0x7 line.long 0x00 "GPIO_INTSTATUS,Interrupt Status Register" bitfld.long 0x00 11. " FPO ,FPGA_POWER_ON" "Not activated,Activated" bitfld.long 0x00 10. " CDP ,CONF_DONE Pin" "Not activated,Activated" bitfld.long 0x00 9. " NSP ,nSTATUS Pin" "Not activated,Activated" textline " " bitfld.long 0x00 8. " NCP ,nCONFIG Pin" "Not activated,Activated" bitfld.long 0x00 7. " PRD ,PR_DONE" "Not activated,Activated" bitfld.long 0x00 6. " PRE ,PR_ERROR" "Not activated,Activated" textline " " bitfld.long 0x00 5. " PRR ,PR_READY" "Not activated,Activated" bitfld.long 0x00 4. " CCD ,CVP_CONF_DONE" "Not activated,Activated" bitfld.long 0x00 3. " CRC ,CRC_ERROR" "Not activated,Activated" textline " " bitfld.long 0x00 2. " ID ,INIT_DONE" "Not activated,Activated" bitfld.long 0x00 1. " CD ,CONF_DONE" "Not activated,Activated" bitfld.long 0x00 0. " NS ,nSTATUS" "Not activated,Activated" line.long 0x04 "GPIO_RAW_INTSTATUS,Raw Interrupt Status Register" bitfld.long 0x04 11. " FPO ,FPGA_POWER_ON" "Not activated,Activated" bitfld.long 0x04 10. " CDP ,CONF_DONE Pin" "Not activated,Activated" bitfld.long 0x04 9. " NSP ,nSTATUS Pin" "Not activated,Activated" textline " " bitfld.long 0x04 8. " NCP ,nCONFIG Pin" "Not activated,Activated" bitfld.long 0x04 7. " PRD ,PR_DONE" "Not activated,Activated" bitfld.long 0x04 6. " PRE ,PR_ERROR" "Not activated,Activated" textline " " bitfld.long 0x04 5. " PRR ,PR_READY" "Not activated,Activated" bitfld.long 0x04 4. " CCD ,CVP_CONF_DONE" "Not activated,Activated" bitfld.long 0x04 3. " CRC ,CRC_ERROR" "Not activated,Activated" textline " " bitfld.long 0x04 2. " ID ,INIT_DONE" "Not activated,Activated" bitfld.long 0x04 1. " CD ,CONF_DONE" "Not activated,Activated" bitfld.long 0x04 0. " NS ,nSTATUS" "Not activated,Activated" wgroup.long 0x84C++0x3 line.long 0x00 "GPIO_PORTA_EOI,Clear Interrupt Register" bitfld.long 0x00 11. " FPO ,FPGA_POWER_ON" "No clear,Clear" bitfld.long 0x00 10. " CDP ,CONF_DONE Pin" "No clear,Clear" bitfld.long 0x00 9. " NSP ,nSTATUS Pin" "No clear,Clear" textline " " bitfld.long 0x00 8. " NCP ,nCONFIG Pin" "No clear,Clear" bitfld.long 0x00 7. " PRD ,PR_DONE" "No clear,Clear" bitfld.long 0x00 6. " PRE ,PR_ERROR" "No clear,Clear" textline " " bitfld.long 0x00 5. " PRR ,PR_READY" "No clear,Clear" bitfld.long 0x00 4. " CCD ,CVP_CONF_DONE" "No clear,Clear" bitfld.long 0x00 3. " CRC ,CRC_ERROR" "No clear,Clear" textline " " bitfld.long 0x00 2. " ID ,INIT_DONE" "No clear,Clear" bitfld.long 0x00 1. " CD ,CONF_DONE" "No clear,Clear" bitfld.long 0x00 0. " NS ,nSTATUS" "No clear,Clear" rgroup.long 0x850++0x3 line.long 0x00 "GPIO_EXT_PORTA,External Port A Register" bitfld.long 0x00 11. " FPO ,FPGA_POWER_ON" "0,1" bitfld.long 0x00 10. " CDP ,CONF_DONE Pin" "0,1" bitfld.long 0x00 9. " NSP ,nSTATUS Pin" "0,1" textline " " bitfld.long 0x00 8. " NCP ,nCONFIG Pin" "0,1" bitfld.long 0x00 7. " PRD ,PR_DONE" "0,1" bitfld.long 0x00 6. " PRE ,PR_ERROR" "0,1" textline " " bitfld.long 0x00 5. " PRR ,PR_READY" "0,1" bitfld.long 0x00 4. " CCD ,CVP_CONF_DONE" "0,1" bitfld.long 0x00 3. " CRC ,CRC_ERROR" "0,1" textline " " bitfld.long 0x00 2. " ID ,INIT_DONE" "0,1" bitfld.long 0x00 1. " CD ,CONF_DONE" "0,1" bitfld.long 0x00 0. " NS ,nSTATUS" "0,1" group.long 0x860++0x3 line.long 0x00 "GPIO_LS_SYNC,Synchronization Level Register" bitfld.long 0x00 0. " GPIO_LS_SYNC ,Synchronization Level Field" "Not synchronized,Synchronized" rgroup.long 0x86C++0xB line.long 0x00 "GPIO_VER_ID_CODE,GPIO Version Register" line.long 0x04 "GPIO_CONFIG_REG2,Configuration Register 2" bitfld.long 0x04 15.--19. " ENCODED_ID_PWIDTH_D ,Port D Width (less 1)" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,8 bits,Reserved,Reserved,Reserved,12 bits,?..." bitfld.long 0x04 10.--14. " ENCODED_ID_PWIDTH_C ,Port C Width (less 1)" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,8 bits,Reserved,Reserved,Reserved,12 bits,?..." bitfld.long 0x04 5.--9. " ENCODED_ID_PWIDTH_B ,Port B Width (less 1)" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,8 bits,Reserved,Reserved,Reserved,12 bits,?..." textline " " bitfld.long 0x04 0.--4. " ENCODED_ID_PWIDTH_A ,Port A Width (less 1)" "Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,8 bits,Reserved,Reserved,Reserved,12 bits,?..." line.long 0x08 "GPIO_CONFIG_REG1,Configuration Register 1" bitfld.long 0x08 16.--20. " ENCODED_ID_WIDTH ,Encoded ID Width Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x08 15. " GPIO_ID ,ID Field" "Excluded,?..." bitfld.long 0x08 14. " ADD_ENCODED_PARAMS ,Encoded GPIO Parameters Available" "Reserved,Enabled" textline " " bitfld.long 0x08 13. " DEBOUNCE ,Debounce Field" "Disabled,?..." bitfld.long 0x08 12. " PORTA_INTR ,Port A Interrupt Field" "Reserved,Enabled" bitfld.long 0x08 8. " HW_PORTA ,HW PORTA" "Reserved,Enabled" textline " " bitfld.long 0x08 7. " PORTD_SINGLE_CTL ,PORT D SINGLE CTL" "Reserved,Enabled" bitfld.long 0x08 6. " PORTC_SINGLE_CTL ,PORT C SINGLE CTL" "Reserved,Enabled" bitfld.long 0x08 5. " PORTB_SINGLE_CTL ,PORT B SINGLE CTL" "Reserved,Enabled" textline " " bitfld.long 0x08 4. " PORTA_SINGLE_CTL ,PORT A SINGLE CTL" "Reserved,Enabled" bitfld.long 0x08 2.--3. " NUM_PORTS ,NUM PORTS" "1,?..." bitfld.long 0x08 0.--1. " APB_DATA_WIDTH ,APB DATA WIDTH" "Reserved,Reserved,32-bits,?..." width 0xB tree.end tree "FPGA Data" base ad:0xFFB90000 width 6. group.long 0x00++0x3 line.long 0x00 "DATA,Write Data Register" width 0xB tree.end tree.end tree "ACPIDMAP (ACP ID Mapper)" base ad:0xFF707000 width 10. group.long 0x0++0x7 line.long 0x00 "VID2RD,Read AXI Master Mapping Register for Fixed Virtual ID 2" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID2WR,Write AXI Master Mapping Register for Fixed Virtual ID 2" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" group.long 0x8++0x7 line.long 0x00 "VID3RD,Read AXI Master Mapping Register for Fixed Virtual ID 3" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID3WR,Write AXI Master Mapping Register for Fixed Virtual ID 3" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" group.long 0x10++0x7 line.long 0x00 "VID4RD,Read AXI Master Mapping Register for Fixed Virtual ID 4" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID4WR,Write AXI Master Mapping Register for Fixed Virtual ID 4" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" group.long 0x18++0x7 line.long 0x00 "VID5RD,Read AXI Master Mapping Register for Fixed Virtual ID 5" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID5WR,Write AXI Master Mapping Register for Fixed Virtual ID 5" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" group.long 0x20++0x7 line.long 0x00 "VID6RD,Read AXI Master Mapping Register for Fixed Virtual ID 6" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID6WR,Write AXI Master Mapping Register for Fixed Virtual ID 6" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" group.long 0x28++0x7 line.long 0x00 "DYNRD,Read AXI Master Mapping Register for Dynamic Virtual ID Remap" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "DYNWR,Write AXI Master Mapping Register for Dynamic Virtual ID Remap" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" rgroup.long 0x30++0x7 line.long 0x00 "VID2RD_S,Read AXI Master Mapping Status Register for Fixed Virtual ID 2" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID2WR_S,Write AXI Master Mapping Status Register for Fixed Virtual ID 2" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" rgroup.long 0x38++0x7 line.long 0x00 "VID3RD_S,Read AXI Master Mapping Status Register for Fixed Virtual ID 3" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID3WR_S,Write AXI Master Mapping Status Register for Fixed Virtual ID 3" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" rgroup.long 0x40++0x7 line.long 0x00 "VID4RD_S,Read AXI Master Mapping Status Register for Fixed Virtual ID 4" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID4WR_S,Write AXI Master Mapping Status Register for Fixed Virtual ID 4" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" rgroup.long 0x48++0x7 line.long 0x00 "VID5RD_S,Read AXI Master Mapping Status Register for Fixed Virtual ID 5" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID5WR_S,Write AXI Master Mapping Status Register for Fixed Virtual ID 5" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" rgroup.long 0x50++0x7 line.long 0x00 "VID6RD_S,Read AXI Master Mapping Status Register for Fixed Virtual ID 6" bitfld.long 0x00 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x00 16.--27. 1. " MID ,Remap Master" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "VID6WR_S,Write AXI Master Mapping Status Register for Fixed Virtual ID 6" bitfld.long 0x04 31. " FORCE ,Force Mapping" "Disabled,Enabled" hexmask.long.word 0x04 16.--27. 1. " MID ,Remap Master" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" rgroup.long 0x58++0x7 line.long 0x00 "DYNRD_S,Read AXI Master Mapping Register for Dynamic Virtual ID Remap" bitfld.long 0x00 12.--13. " PAGE ,ARADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x00 5.--8. " ARUSER ,ARUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " CARUSER ,ARUSER[0] value to SCU" "0,1" line.long 0x04 "DYNWR_S,Write AXI Master Mapping Status Register for Dynamic Virtual ID Remap" bitfld.long 0x04 12.--13. " PAGE ,AWADDR 1GB Page Decoder" "1st,2nd,3rd,4th" bitfld.long 0x04 5.--8. " AWUSER ,AWUSER[4:1] value to SCU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 4. " CAWUSER ,AWUSER[0] value to SCU" "0,1" width 0x0B tree.end tree.open "GPIO (General Purpouse Input Output)" tree "GPIO 0" base ad:0xFF708000 width 15. group.long 0x00++0x07 line.long 0x00 "SWPORTA_DR,Port A Data Register" bitfld.long 0x00 28. " SWPORTA_DR_[28] ,Port A Data Bit 28" "0,1" bitfld.long 0x00 27. " [27] ,Port A Data Bit 27" "0,1" bitfld.long 0x00 26. " [26] ,Port A Data Bit 26" "0,1" bitfld.long 0x00 25. " [25] ,Port A Data Bit 25" "0,1" textline " " bitfld.long 0x00 24. " [24] ,Port A Data Bit 24" "0,1" bitfld.long 0x00 23. " [23] ,Port A Data Bit 23" "0,1" bitfld.long 0x00 22. " [22] ,Port A Data Bit 22" "0,1" bitfld.long 0x00 21. " [21] ,Port A Data Bit 21" "0,1" textline " " bitfld.long 0x00 20. " [20] ,Port A Data Bit 20" "0,1" bitfld.long 0x00 19. " [19] ,Port A Data Bit 19" "0,1" bitfld.long 0x00 18. " [18] ,Port A Data Bit 18" "0,1" bitfld.long 0x00 17. " [17] ,Port A Data Bit 17" "0,1" textline " " bitfld.long 0x00 16. " [16] ,Port A Data Bit 16" "0,1" bitfld.long 0x00 15. " [15] ,Port A Data Bit 15" "0,1" bitfld.long 0x00 14. " [14] ,Port A Data Bit 14" "0,1" bitfld.long 0x00 13. " [13] ,Port A Data Bit 13" "0,1" textline " " bitfld.long 0x00 12. " [12] ,Port A Data Bit 12" "0,1" bitfld.long 0x00 11. " [11] ,Port A Data Bit 11" "0,1" bitfld.long 0x00 10. " [10] ,Port A Data Bit 10" "0,1" bitfld.long 0x00 9. " [9] ,Port A Data Bit 9" "0,1" textline " " bitfld.long 0x00 8. " [8] ,Port A Data Bit 8" "0,1" bitfld.long 0x00 7. " [7] ,Port A Data Bit 7" "0,1" bitfld.long 0x00 6. " [6] ,Port A Data Bit 6" "0,1" bitfld.long 0x00 5. " [5] ,Port A Data Bit 5" "0,1" textline " " bitfld.long 0x00 4. " [4] ,Port A Data Bit 4" "0,1" bitfld.long 0x00 3. " [3] ,Port A Data Bit 3" "0,1" bitfld.long 0x00 2. " [2] ,Port A Data Bit 2" "0,1" bitfld.long 0x00 1. " [1] ,Port A Data Bit 1" "0,1" textline " " bitfld.long 0x00 0. " [0] ,Port A Data Bit 0" "0,1" textline " " line.long 0x04 "SWPORTA_DDR,Port A Data Direction Register" bitfld.long 0x04 28. " SWPORTA_DDR_[28] ,Port A Data Direction Field 28" "Input,Output" bitfld.long 0x04 27. " [27] ,Port A Data Direction Field 27" "Input,Output" bitfld.long 0x04 26. " [26] ,Port A Data Direction Field 26" "Input,Output" bitfld.long 0x04 25. " [25] ,Port A Data Direction Field 25" "Input,Output" textline " " bitfld.long 0x04 24. " [24] ,Port A Data Direction Field 24" "Input,Output" bitfld.long 0x04 23. " [23] ,Port A Data Direction Field 23" "Input,Output" bitfld.long 0x04 22. " [22] ,Port A Data Direction Field 22" "Input,Output" bitfld.long 0x04 21. " [21] ,Port A Data Direction Field 21" "Input,Output" textline " " bitfld.long 0x04 20. " [20] ,Port A Data Direction Field 20" "Input,Output" bitfld.long 0x04 19. " [19] ,Port A Data Direction Field 19" "Input,Output" bitfld.long 0x04 18. " [18] ,Port A Data Direction Field 18" "Input,Output" bitfld.long 0x04 17. " [17] ,Port A Data Direction Field 17" "Input,Output" textline " " bitfld.long 0x04 16. " [16] ,Port A Data Direction Field 16" "Input,Output" bitfld.long 0x04 15. " [15] ,Port A Data Direction Field 15" "Input,Output" bitfld.long 0x04 14. " [14] ,Port A Data Direction Field 14" "Input,Output" bitfld.long 0x04 13. " [13] ,Port A Data Direction Field 13" "Input,Output" textline " " bitfld.long 0x04 12. " [12] ,Port A Data Direction Field 12" "Input,Output" bitfld.long 0x04 11. " [11] ,Port A Data Direction Field 11" "Input,Output" bitfld.long 0x04 10. " [10] ,Port A Data Direction Field 10" "Input,Output" bitfld.long 0x04 9. " [9] ,Port A Data Direction Field 9" "Input,Output" textline " " bitfld.long 0x04 8. " [8] ,Port A Data Direction Field 8" "Input,Output" bitfld.long 0x04 7. " [7] ,Port A Data Direction Field 7" "Input,Output" bitfld.long 0x04 6. " [6] ,Port A Data Direction Field 6" "Input,Output" bitfld.long 0x04 5. " [5] ,Port A Data Direction Field 5" "Input,Output" textline " " bitfld.long 0x04 4. " [4] ,Port A Data Direction Field 4" "Input,Output" bitfld.long 0x04 3. " [3] ,Port A Data Direction Field 3" "Input,Output" bitfld.long 0x04 2. " [2] ,Port A Data Direction Field 2" "Input,Output" bitfld.long 0x04 1. " [1] ,Port A Data Direction Field 1" "Input,Output" textline " " bitfld.long 0x04 0. " [0] ,Port A Data Direction Field 0" "Input,Output" textline " " group.long 0x30++0x1B line.long 0x00 "INTEN,Interrupt Enable Register" bitfld.long 0x00 28. " INTEN_[28] ,Interrupt Enable Field 28" "Disabled,Enabled" bitfld.long 0x00 27. " [27] ,Interrupt Enable Field 27" "Disabled,Enabled" bitfld.long 0x00 26. " [26] ,Interrupt Enable Field 26" "Disabled,Enabled" bitfld.long 0x00 25. " [25] ,Interrupt Enable Field 25" "Disabled,Enabled" textline " " bitfld.long 0x00 24. " [24] ,Interrupt Enable Field 24" "Disabled,Enabled" bitfld.long 0x00 23. " [23] ,Interrupt Enable Field 23" "Disabled,Enabled" bitfld.long 0x00 22. " [22] ,Interrupt Enable Field 22" "Disabled,Enabled" bitfld.long 0x00 21. " [21] ,Interrupt Enable Field 21" "Disabled,Enabled" textline " " bitfld.long 0x00 20. " [20] ,Interrupt Enable Field 20" "Disabled,Enabled" bitfld.long 0x00 19. " [19] ,Interrupt Enable Field 19" "Disabled,Enabled" bitfld.long 0x00 18. " [18] ,Interrupt Enable Field 18" "Disabled,Enabled" bitfld.long 0x00 17. " [17] ,Interrupt Enable Field 17" "Disabled,Enabled" textline " " bitfld.long 0x00 16. " [16] ,Interrupt Enable Field 16" "Disabled,Enabled" bitfld.long 0x00 15. " [15] ,Interrupt Enable Field 15" "Disabled,Enabled" bitfld.long 0x00 14. " [14] ,Interrupt Enable Field 14" "Disabled,Enabled" bitfld.long 0x00 13. " [13] ,Interrupt Enable Field 13" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " [12] ,Interrupt Enable Field 12" "Disabled,Enabled" bitfld.long 0x00 11. " [11] ,Interrupt Enable Field 11" "Disabled,Enabled" bitfld.long 0x00 10. " [10] ,Interrupt Enable Field 10" "Disabled,Enabled" bitfld.long 0x00 9. " [9] ,Interrupt Enable Field 9" "Disabled,Enabled" textline " " bitfld.long 0x00 8. " [8] ,Interrupt Enable Field 8" "Disabled,Enabled" bitfld.long 0x00 7. " [7] ,Interrupt Enable Field 7" "Disabled,Enabled" bitfld.long 0x00 6. " [6] ,Interrupt Enable Field 6" "Disabled,Enabled" bitfld.long 0x00 5. " [5] ,Interrupt Enable Field 5" "Disabled,Enabled" textline " " bitfld.long 0x00 4. " [4] ,Interrupt Enable Field 4" "Disabled,Enabled" bitfld.long 0x00 3. " [3] ,Interrupt Enable Field 3" "Disabled,Enabled" bitfld.long 0x00 2. " [2] ,Interrupt Enable Field 2" "Disabled,Enabled" bitfld.long 0x00 1. " [1] ,Interrupt Enable Field 1" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " [0] ,Interrupt Enable Field 0" "Disabled,Enabled" textline " " line.long 0x04 "INTMASK,Interrupt Mask Register" bitfld.long 0x04 28. " INTMASK_[28] ,Interrupt Mask Field 28" "Not masked,Masked" bitfld.long 0x04 27. " [27] ,Interrupt Mask Field 27" "Not masked,Masked" bitfld.long 0x04 26. " [26] ,Interrupt Mask Field 26" "Not masked,Masked" bitfld.long 0x04 25. " [25] ,Interrupt Mask Field 25" "Not masked,Masked" textline " " bitfld.long 0x04 24. " [24] ,Interrupt Mask Field 24" "Not masked,Masked" bitfld.long 0x04 23. " [23] ,Interrupt Mask Field 23" "Not masked,Masked" bitfld.long 0x04 22. " [22] ,Interrupt Mask Field 22" "Not masked,Masked" bitfld.long 0x04 21. " [21] ,Interrupt Mask Field 21" "Not masked,Masked" textline " " bitfld.long 0x04 20. " [20] ,Interrupt Mask Field 20" "Not masked,Masked" bitfld.long 0x04 19. " [19] ,Interrupt Mask Field 19" "Not masked,Masked" bitfld.long 0x04 18. " [18] ,Interrupt Mask Field 18" "Not masked,Masked" bitfld.long 0x04 17. " [17] ,Interrupt Mask Field 17" "Not masked,Masked" textline " " bitfld.long 0x04 16. " [16] ,Interrupt Mask Field 16" "Not masked,Masked" bitfld.long 0x04 15. " [15] ,Interrupt Mask Field 15" "Not masked,Masked" bitfld.long 0x04 14. " [14] ,Interrupt Mask Field 14" "Not masked,Masked" bitfld.long 0x04 13. " [13] ,Interrupt Mask Field 13" "Not masked,Masked" textline " " bitfld.long 0x04 12. " [12] ,Interrupt Mask Field 12" "Not masked,Masked" bitfld.long 0x04 11. " [11] ,Interrupt Mask Field 11" "Not masked,Masked" bitfld.long 0x04 10. " [10] ,Interrupt Mask Field 10" "Not masked,Masked" bitfld.long 0x04 9. " [9] ,Interrupt Mask Field 9" "Not masked,Masked" textline " " bitfld.long 0x04 8. " [8] ,Interrupt Mask Field 8" "Not masked,Masked" bitfld.long 0x04 7. " [7] ,Interrupt Mask Field 7" "Not masked,Masked" bitfld.long 0x04 6. " [6] ,Interrupt Mask Field 6" "Not masked,Masked" bitfld.long 0x04 5. " [5] ,Interrupt Mask Field 5" "Not masked,Masked" textline " " bitfld.long 0x04 4. " [4] ,Interrupt Mask Field 4" "Not masked,Masked" bitfld.long 0x04 3. " [3] ,Interrupt Mask Field 3" "Not masked,Masked" bitfld.long 0x04 2. " [2] ,Interrupt Mask Field 2" "Not masked,Masked" bitfld.long 0x04 1. " [1] ,Interrupt Mask Field 1" "Not masked,Masked" textline " " bitfld.long 0x04 0. " [0] ,Interrupt Mask Field 0" "Not masked,Masked" textline " " line.long 0x08 "INTTYPE_LEVEL,Interrupt Level Register" bitfld.long 0x08 28. " INTTYPE_LEVEL_[28] ,Interrupt Level Field 28" "Level,Edge" bitfld.long 0x08 27. " [27] ,Interrupt Level Field 27" "Level,Edge" bitfld.long 0x08 26. " [26] ,Interrupt Level Field 26" "Level,Edge" bitfld.long 0x08 25. " [25] ,Interrupt Level Field 25" "Level,Edge" textline " " bitfld.long 0x08 24. " [24] ,Interrupt Level Field 24" "Level,Edge" bitfld.long 0x08 23. " [23] ,Interrupt Level Field 23" "Level,Edge" bitfld.long 0x08 22. " [22] ,Interrupt Level Field 22" "Level,Edge" bitfld.long 0x08 21. " [21] ,Interrupt Level Field 21" "Level,Edge" textline " " bitfld.long 0x08 20. " [20] ,Interrupt Level Field 20" "Level,Edge" bitfld.long 0x08 19. " [19] ,Interrupt Level Field 19" "Level,Edge" bitfld.long 0x08 18. " [18] ,Interrupt Level Field 18" "Level,Edge" bitfld.long 0x08 17. " [17] ,Interrupt Level Field 17" "Level,Edge" textline " " bitfld.long 0x08 16. " [16] ,Interrupt Level Field 16" "Level,Edge" bitfld.long 0x08 15. " [15] ,Interrupt Level Field 15" "Level,Edge" bitfld.long 0x08 14. " [14] ,Interrupt Level Field 14" "Level,Edge" bitfld.long 0x08 13. " [13] ,Interrupt Level Field 13" "Level,Edge" textline " " bitfld.long 0x08 12. " [12] ,Interrupt Level Field 12" "Level,Edge" bitfld.long 0x08 11. " [11] ,Interrupt Level Field 11" "Level,Edge" bitfld.long 0x08 10. " [10] ,Interrupt Level Field 10" "Level,Edge" bitfld.long 0x08 9. " [9] ,Interrupt Level Field 9" "Level,Edge" textline " " bitfld.long 0x08 8. " [8] ,Interrupt Level Field 8" "Level,Edge" bitfld.long 0x08 7. " [7] ,Interrupt Level Field 7" "Level,Edge" bitfld.long 0x08 6. " [6] ,Interrupt Level Field 6" "Level,Edge" bitfld.long 0x08 5. " [5] ,Interrupt Level Field 5" "Level,Edge" textline " " bitfld.long 0x08 4. " [4] ,Interrupt Level Field 4" "Level,Edge" bitfld.long 0x08 3. " [3] ,Interrupt Level Field 3" "Level,Edge" bitfld.long 0x08 2. " [2] ,Interrupt Level Field 2" "Level,Edge" bitfld.long 0x08 1. " [1] ,Interrupt Level Field 1" "Level,Edge" textline " " bitfld.long 0x08 0. " [0] ,Interrupt Level Field 0" "Level,Edge" textline " " line.long 0x0C "INT_POLARITY,Interrupt Polarity Register" bitfld.long 0x0C 28. " INT_POLARITY_[28] ,Polarity Control Field 28" "Low,High" bitfld.long 0x0C 27. " [27] ,Polarity Control Field 27" "Low,High" bitfld.long 0x0C 26. " [26] ,Polarity Control Field 26" "Low,High" bitfld.long 0x0C 25. " [25] ,Polarity Control Field 25" "Low,High" textline " " bitfld.long 0x0C 24. " [24] ,Polarity Control Field 24" "Low,High" bitfld.long 0x0C 23. " [23] ,Polarity Control Field 23" "Low,High" bitfld.long 0x0C 22. " [22] ,Polarity Control Field 22" "Low,High" bitfld.long 0x0C 21. " [21] ,Polarity Control Field 21" "Low,High" textline " " bitfld.long 0x0C 20. " [20] ,Polarity Control Field 20" "Low,High" bitfld.long 0x0C 19. " [19] ,Polarity Control Field 19" "Low,High" bitfld.long 0x0C 18. " [18] ,Polarity Control Field 18" "Low,High" bitfld.long 0x0C 17. " [17] ,Polarity Control Field 17" "Low,High" textline " " bitfld.long 0x0C 16. " [16] ,Polarity Control Field 16" "Low,High" bitfld.long 0x0C 15. " [15] ,Polarity Control Field 15" "Low,High" bitfld.long 0x0C 14. " [14] ,Polarity Control Field 14" "Low,High" bitfld.long 0x0C 13. " [13] ,Polarity Control Field 13" "Low,High" textline " " bitfld.long 0x0C 12. " [12] ,Polarity Control Field 12" "Low,High" bitfld.long 0x0C 11. " [11] ,Polarity Control Field 11" "Low,High" bitfld.long 0x0C 10. " [10] ,Polarity Control Field 10" "Low,High" bitfld.long 0x0C 9. " [9] ,Polarity Control Field 9" "Low,High" textline " " bitfld.long 0x0C 8. " [8] ,Polarity Control Field 8" "Low,High" bitfld.long 0x0C 7. " [7] ,Polarity Control Field 7" "Low,High" bitfld.long 0x0C 6. " [6] ,Polarity Control Field 6" "Low,High" bitfld.long 0x0C 5. " [5] ,Polarity Control Field 5" "Low,High" textline " " bitfld.long 0x0C 4. " [4] ,Polarity Control Field 4" "Low,High" bitfld.long 0x0C 3. " [3] ,Polarity Control Field 3" "Low,High" bitfld.long 0x0C 2. " [2] ,Polarity Control Field 2" "Low,High" bitfld.long 0x0C 1. " [1] ,Polarity Control Field 1" "Low,High" textline " " bitfld.long 0x0C 0. " [0] ,Polarity Control Field 0" "Low,High" textline " " line.long 0x10 "INTSTATUS,Interrupt Status Register" bitfld.long 0x10 28. " INTSTATUS_[28] ,Interrupt Status Field 28" "No interrupt,Interrupt" bitfld.long 0x10 27. " [27] ,Interrupt Status Field 27" "No interrupt,Interrupt" bitfld.long 0x10 26. " [26] ,Interrupt Status Field 26" "No interrupt,Interrupt" bitfld.long 0x10 25. " [25] ,Interrupt Status Field 25" "No interrupt,Interrupt" textline " " bitfld.long 0x10 24. " [24] ,Interrupt Status Field 24" "No interrupt,Interrupt" bitfld.long 0x10 23. " [23] ,Interrupt Status Field 23" "No interrupt,Interrupt" bitfld.long 0x10 22. " [22] ,Interrupt Status Field 22" "No interrupt,Interrupt" bitfld.long 0x10 21. " [21] ,Interrupt Status Field 21" "No interrupt,Interrupt" textline " " bitfld.long 0x10 20. " [20] ,Interrupt Status Field 20" "No interrupt,Interrupt" bitfld.long 0x10 19. " [19] ,Interrupt Status Field 19" "No interrupt,Interrupt" bitfld.long 0x10 18. " [18] ,Interrupt Status Field 18" "No interrupt,Interrupt" bitfld.long 0x10 17. " [17] ,Interrupt Status Field 17" "No interrupt,Interrupt" textline " " bitfld.long 0x10 16. " [16] ,Interrupt Status Field 16" "No interrupt,Interrupt" bitfld.long 0x10 15. " [15] ,Interrupt Status Field 15" "No interrupt,Interrupt" bitfld.long 0x10 14. " [14] ,Interrupt Status Field 14" "No interrupt,Interrupt" bitfld.long 0x10 13. " [13] ,Interrupt Status Field 13" "No interrupt,Interrupt" textline " " bitfld.long 0x10 12. " [12] ,Interrupt Status Field 12" "No interrupt,Interrupt" bitfld.long 0x10 11. " [11] ,Interrupt Status Field 11" "No interrupt,Interrupt" bitfld.long 0x10 10. " [10] ,Interrupt Status Field 10" "No interrupt,Interrupt" bitfld.long 0x10 9. " [9] ,Interrupt Status Field 9" "No interrupt,Interrupt" textline " " bitfld.long 0x10 8. " [8] ,Interrupt Status Field 8" "No interrupt,Interrupt" bitfld.long 0x10 7. " [7] ,Interrupt Status Field 7" "No interrupt,Interrupt" bitfld.long 0x10 6. " [6] ,Interrupt Status Field 6" "No interrupt,Interrupt" bitfld.long 0x10 5. " [5] ,Interrupt Status Field 5" "No interrupt,Interrupt" textline " " bitfld.long 0x10 4. " [4] ,Interrupt Status Field 4" "No interrupt,Interrupt" bitfld.long 0x10 3. " [3] ,Interrupt Status Field 3" "No interrupt,Interrupt" bitfld.long 0x10 2. " [2] ,Interrupt Status Field 2" "No interrupt,Interrupt" bitfld.long 0x10 1. " [1] ,Interrupt Status Field 1" "No interrupt,Interrupt" textline " " bitfld.long 0x10 0. " [0] ,Interrupt Status Field 0" "No interrupt,Interrupt" textline " " line.long 0x14 "RAW_INTSTATUS,Raw Interrupt Status Register" bitfld.long 0x14 28. " RAW_INTSTATUS_[28] ,Raw Interrupt Status Field 28" "No interrupt,Interrupt" bitfld.long 0x14 27. " [27] ,Raw Interrupt Status Field 27" "No interrupt,Interrupt" bitfld.long 0x14 26. " [26] ,Raw Interrupt Status Field 26" "No interrupt,Interrupt" bitfld.long 0x14 25. " [25] ,Raw Interrupt Status Field 25" "No interrupt,Interrupt" textline " " bitfld.long 0x14 24. " [24] ,Raw Interrupt Status Field 24" "No interrupt,Interrupt" bitfld.long 0x14 23. " [23] ,Raw Interrupt Status Field 23" "No interrupt,Interrupt" bitfld.long 0x14 22. " [22] ,Raw Interrupt Status Field 22" "No interrupt,Interrupt" bitfld.long 0x14 21. " [21] ,Raw Interrupt Status Field 21" "No interrupt,Interrupt" textline " " bitfld.long 0x14 20. " [20] ,Raw Interrupt Status Field 20" "No interrupt,Interrupt" bitfld.long 0x14 19. " [19] ,Raw Interrupt Status Field 19" "No interrupt,Interrupt" bitfld.long 0x14 18. " [18] ,Raw Interrupt Status Field 18" "No interrupt,Interrupt" bitfld.long 0x14 17. " [17] ,Raw Interrupt Status Field 17" "No interrupt,Interrupt" textline " " bitfld.long 0x14 16. " [16] ,Raw Interrupt Status Field 16" "No interrupt,Interrupt" bitfld.long 0x14 15. " [15] ,Raw Interrupt Status Field 15" "No interrupt,Interrupt" bitfld.long 0x14 14. " [14] ,Raw Interrupt Status Field 14" "No interrupt,Interrupt" bitfld.long 0x14 13. " [13] ,Raw Interrupt Status Field 13" "No interrupt,Interrupt" textline " " bitfld.long 0x14 12. " [12] ,Raw Interrupt Status Field 12" "No interrupt,Interrupt" bitfld.long 0x14 11. " [11] ,Raw Interrupt Status Field 11" "No interrupt,Interrupt" bitfld.long 0x14 10. " [10] ,Raw Interrupt Status Field 10" "No interrupt,Interrupt" bitfld.long 0x14 9. " [9] ,Raw Interrupt Status Field 9" "No interrupt,Interrupt" textline " " bitfld.long 0x14 8. " [8] ,Raw Interrupt Status Field 8" "No interrupt,Interrupt" bitfld.long 0x14 7. " [7] ,Raw Interrupt Status Field 7" "No interrupt,Interrupt" bitfld.long 0x14 6. " [6] ,Raw Interrupt Status Field 6" "No interrupt,Interrupt" bitfld.long 0x14 5. " [5] ,Raw Interrupt Status Field 5" "No interrupt,Interrupt" textline " " bitfld.long 0x14 4. " [4] ,Raw Interrupt Status Field 4" "No interrupt,Interrupt" bitfld.long 0x14 3. " [3] ,Raw Interrupt Status Field 3" "No interrupt,Interrupt" bitfld.long 0x14 2. " [2] ,Raw Interrupt Status Field 2" "No interrupt,Interrupt" bitfld.long 0x14 1. " [1] ,Raw Interrupt Status Field 1" "No interrupt,Interrupt" textline " " bitfld.long 0x14 0. " [0] ,Raw Interrupt Status Field 0" "No interrupt,Interrupt" textline " " line.long 0x18 "DEBOUNCE,Debounce Enable Register" bitfld.long 0x18 28. " DEBOUNCE_[28] ,Debounce enable Field 28" "Disabled,Enabled" bitfld.long 0x18 27. " [27] ,Debounce enable Field 27" "Disabled,Enabled" bitfld.long 0x18 26. " [26] ,Debounce enable Field 26" "Disabled,Enabled" bitfld.long 0x18 25. " [25] ,Debounce enable Field 25" "Disabled,Enabled" textline " " bitfld.long 0x18 24. " [24] ,Debounce enable Field 24" "Disabled,Enabled" bitfld.long 0x18 23. " [23] ,Debounce enable Field 23" "Disabled,Enabled" bitfld.long 0x18 22. " [22] ,Debounce enable Field 22" "Disabled,Enabled" bitfld.long 0x18 21. " [21] ,Debounce enable Field 21" "Disabled,Enabled" textline " " bitfld.long 0x18 20. " [20] ,Debounce enable Field 20" "Disabled,Enabled" bitfld.long 0x18 19. " [19] ,Debounce enable Field 19" "Disabled,Enabled" bitfld.long 0x18 18. " [18] ,Debounce enable Field 18" "Disabled,Enabled" bitfld.long 0x18 17. " [17] ,Debounce enable Field 17" "Disabled,Enabled" textline " " bitfld.long 0x18 16. " [16] ,Debounce enable Field 16" "Disabled,Enabled" bitfld.long 0x18 15. " [15] ,Debounce enable Field 15" "Disabled,Enabled" bitfld.long 0x18 14. " [14] ,Debounce enable Field 14" "Disabled,Enabled" bitfld.long 0x18 13. " [13] ,Debounce enable Field 13" "Disabled,Enabled" textline " " bitfld.long 0x18 12. " [12] ,Debounce enable Field 12" "Disabled,Enabled" bitfld.long 0x18 11. " [11] ,Debounce enable Field 11" "Disabled,Enabled" bitfld.long 0x18 10. " [10] ,Debounce enable Field 10" "Disabled,Enabled" bitfld.long 0x18 9. " [9] ,Debounce enable Field 9" "Disabled,Enabled" textline " " bitfld.long 0x18 8. " [8] ,Debounce enable Field 8" "Disabled,Enabled" bitfld.long 0x18 7. " [7] ,Debounce enable Field 7" "Disabled,Enabled" bitfld.long 0x18 6. " [6] ,Debounce enable Field 6" "Disabled,Enabled" bitfld.long 0x18 5. " [5] ,Debounce enable Field 5" "Disabled,Enabled" textline " " bitfld.long 0x18 4. " [4] ,Debounce enable Field 4" "Disabled,Enabled" bitfld.long 0x18 3. " [3] ,Debounce enable Field 3" "Disabled,Enabled" bitfld.long 0x18 2. " [2] ,Debounce enable Field 2" "Disabled,Enabled" bitfld.long 0x18 1. " [1] ,Debounce enable Field 1" "Disabled,Enabled" textline " " bitfld.long 0x18 0. " [0] ,Debounce enable Field 0" "Disabled,Enabled" textline " " wgroup.long 0x4C++0x03 line.long 0x00 "PORTA_EOI,Clear Interrupt Register" bitfld.long 0x00 28. " PORTA_EOI_[28] ,Edge Interrupt Clear Field 28" "No effect,Clear" bitfld.long 0x00 27. " [27] ,Edge Interrupt Clear Field 27" "No effect,Clear" bitfld.long 0x00 26. " [26] ,Edge Interrupt Clear Field 26" "No effect,Clear" bitfld.long 0x00 25. " [25] ,Edge Interrupt Clear Field 25" "No effect,Clear" textline " " bitfld.long 0x00 24. " [24] ,Edge Interrupt Clear Field 24" "No effect,Clear" bitfld.long 0x00 23. " [23] ,Edge Interrupt Clear Field 23" "No effect,Clear" bitfld.long 0x00 22. " [22] ,Edge Interrupt Clear Field 22" "No effect,Clear" bitfld.long 0x00 21. " [21] ,Edge Interrupt Clear Field 21" "No effect,Clear" textline " " bitfld.long 0x00 20. " [20] ,Edge Interrupt Clear Field 20" "No effect,Clear" bitfld.long 0x00 19. " [19] ,Edge Interrupt Clear Field 19" "No effect,Clear" bitfld.long 0x00 18. " [18] ,Edge Interrupt Clear Field 18" "No effect,Clear" bitfld.long 0x00 17. " [17] ,Edge Interrupt Clear Field 17" "No effect,Clear" textline " " bitfld.long 0x00 16. " [16] ,Edge Interrupt Clear Field 16" "No effect,Clear" bitfld.long 0x00 15. " [15] ,Edge Interrupt Clear Field 15" "No effect,Clear" bitfld.long 0x00 14. " [14] ,Edge Interrupt Clear Field 14" "No effect,Clear" bitfld.long 0x00 13. " [13] ,Edge Interrupt Clear Field 13" "No effect,Clear" textline " " bitfld.long 0x00 12. " [12] ,Edge Interrupt Clear Field 12" "No effect,Clear" bitfld.long 0x00 11. " [11] ,Edge Interrupt Clear Field 11" "No effect,Clear" bitfld.long 0x00 10. " [10] ,Edge Interrupt Clear Field 10" "No effect,Clear" bitfld.long 0x00 9. " [9] ,Edge Interrupt Clear Field 9" "No effect,Clear" textline " " bitfld.long 0x00 8. " [8] ,Edge Interrupt Clear Field 8" "No effect,Clear" bitfld.long 0x00 7. " [7] ,Edge Interrupt Clear Field 7" "No effect,Clear" bitfld.long 0x00 6. " [6] ,Edge Interrupt Clear Field 6" "No effect,Clear" bitfld.long 0x00 5. " [5] ,Edge Interrupt Clear Field 5" "No effect,Clear" textline " " bitfld.long 0x00 4. " [4] ,Edge Interrupt Clear Field 4" "No effect,Clear" bitfld.long 0x00 3. " [3] ,Edge Interrupt Clear Field 3" "No effect,Clear" bitfld.long 0x00 2. " [2] ,Edge Interrupt Clear Field 2" "No effect,Clear" bitfld.long 0x00 1. " [1] ,Edge Interrupt Clear Field 1" "No effect,Clear" textline " " bitfld.long 0x00 0. " [0] ,Edge Interrupt Clear Field 0" "No effect,Clear" textline " " rgroup.long 0x50++0x03 line.long 0x00 "EXT_PORTA,External Port A Register" bitfld.long 0x00 28. " EXT_PORTA_[28] ,External Port Field 28" "0,1" bitfld.long 0x00 27. " [27] ,External Port Field 27" "0,1" bitfld.long 0x00 26. " [26] ,External Port Field 26" "0,1" bitfld.long 0x00 25. " [25] ,External Port Field 25" "0,1" textline " " bitfld.long 0x00 24. " [24] ,External Port Field 24" "0,1" bitfld.long 0x00 23. " [23] ,External Port Field 23" "0,1" bitfld.long 0x00 22. " [22] ,External Port Field 22" "0,1" bitfld.long 0x00 21. " [21] ,External Port Field 21" "0,1" textline " " bitfld.long 0x00 20. " [20] ,External Port Field 20" "0,1" bitfld.long 0x00 19. " [19] ,External Port Field 19" "0,1" bitfld.long 0x00 18. " [18] ,External Port Field 18" "0,1" bitfld.long 0x00 17. " [17] ,External Port Field 17" "0,1" textline " " bitfld.long 0x00 16. " [16] ,External Port Field 16" "0,1" bitfld.long 0x00 15. " [15] ,External Port Field 15" "0,1" bitfld.long 0x00 14. " [14] ,External Port Field 14" "0,1" bitfld.long 0x00 13. " [13] ,External Port Field 13" "0,1" textline " " bitfld.long 0x00 12. " [12] ,External Port Field 12" "0,1" bitfld.long 0x00 11. " [11] ,External Port Field 11" "0,1" bitfld.long 0x00 10. " [10] ,External Port Field 10" "0,1" bitfld.long 0x00 9. " [9] ,External Port Field 9" "0,1" textline " " bitfld.long 0x00 8. " [8] ,External Port Field 8" "0,1" bitfld.long 0x00 7. " [7] ,External Port Field 7" "0,1" bitfld.long 0x00 6. " [6] ,External Port Field 6" "0,1" bitfld.long 0x00 5. " [5] ,External Port Field 5" "0,1" textline " " bitfld.long 0x00 4. " [4] ,External Port Field 4" "0,1" bitfld.long 0x00 3. " [3] ,External Port Field 3" "0,1" bitfld.long 0x00 2. " [2] ,External Port Field 2" "0,1" bitfld.long 0x00 1. " [1] ,External Port Field 1" "0,1" textline " " bitfld.long 0x00 0. " [0] ,External Port Field 0" "0,1" textline " " group.long 0x60++0x03 line.long 0x00 "LS_SYNC,Synchronization Level Register" bitfld.long 0x00 0. " LS_SYNC ,Level-sensitive Interrupts Synchronization Enable" "Disabled,Enabled" width 15. rgroup.long 0x64++0x03 line.long 0x00 "ID_CODE,ID Code Register" rgroup.long 0x6C++0x0B line.long 0x00 "VER_ID_CODE,GPIO Version Register" line.long 0x04 "CONFIG_REG2,Configuration Register 2" bitfld.long 0x04 15.--19. " ENCODED_ID_PWIDTH_D ,Port D Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,,29 bits,?..." bitfld.long 0x04 10.--14. " ENCODED_ID_PWIDTH_C ,Port C Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,29 bits,?..." bitfld.long 0x04 5.--9. " ENCODED_ID_PWIDTH_B ,Port B Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,,29 bits,?..." textline " " bitfld.long 0x04 0.--4. " ENCODED_ID_PWIDTH_A ,Port A Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,,29 bits,?..." line.long 0x08 "CONFIG_REG1,Configuration Register 1" bitfld.long 0x08 16.--20. " ENCODED_ID_WIDTH ,Encoded ID Width Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x08 15. " GPIO_ID ,ID Field" "Disabled,Enabled" bitfld.long 0x08 14. " ADD_ENCODED_PARAMS ,Encoded GPIO Parameters Available" ",Enabled" textline " " bitfld.long 0x08 13. " DEBOUNCE ,Debounce Field" "Disabled,Enabled" bitfld.long 0x08 12. " PORTA_INTR ,Port A Interrupt Field" ",Enabled" textline " " bitfld.long 0x08 8. " HW_PORTA ,HW PORTA" "Disabled,Enabled" bitfld.long 0x08 7. " PORTD_SINGLE_CTL ,PORT D SINGLE CTL" ",Enabled" bitfld.long 0x08 6. " PORTC_SINGLE_CTL ,PORT C SINGLE CTL" ",Enabled" textline " " bitfld.long 0x08 5. " PORTB_SINGLE_CTL ,PORT B SINGLE CTL" ",Enabled" bitfld.long 0x08 4. " PORTA_SINGLE_CTL ,PORT A SINGLE CTL" ",Enabled" bitfld.long 0x08 2.--3. " NUM_PORTS ,NUM PORTS" "1,?..." textline " " bitfld.long 0x08 0.--1. " APB_DATA_WIDTH ,APB DATA WIDTH" ",,32-bits,?..." width 0x0B tree.end tree "GPIO 1" base ad:0xFF709000 width 15. group.long 0x00++0x07 line.long 0x00 "SWPORTA_DR,Port A Data Register" bitfld.long 0x00 28. " SWPORTA_DR_[28] ,Port A Data Bit 28" "0,1" bitfld.long 0x00 27. " [27] ,Port A Data Bit 27" "0,1" bitfld.long 0x00 26. " [26] ,Port A Data Bit 26" "0,1" bitfld.long 0x00 25. " [25] ,Port A Data Bit 25" "0,1" textline " " bitfld.long 0x00 24. " [24] ,Port A Data Bit 24" "0,1" bitfld.long 0x00 23. " [23] ,Port A Data Bit 23" "0,1" bitfld.long 0x00 22. " [22] ,Port A Data Bit 22" "0,1" bitfld.long 0x00 21. " [21] ,Port A Data Bit 21" "0,1" textline " " bitfld.long 0x00 20. " [20] ,Port A Data Bit 20" "0,1" bitfld.long 0x00 19. " [19] ,Port A Data Bit 19" "0,1" bitfld.long 0x00 18. " [18] ,Port A Data Bit 18" "0,1" bitfld.long 0x00 17. " [17] ,Port A Data Bit 17" "0,1" textline " " bitfld.long 0x00 16. " [16] ,Port A Data Bit 16" "0,1" bitfld.long 0x00 15. " [15] ,Port A Data Bit 15" "0,1" bitfld.long 0x00 14. " [14] ,Port A Data Bit 14" "0,1" bitfld.long 0x00 13. " [13] ,Port A Data Bit 13" "0,1" textline " " bitfld.long 0x00 12. " [12] ,Port A Data Bit 12" "0,1" bitfld.long 0x00 11. " [11] ,Port A Data Bit 11" "0,1" bitfld.long 0x00 10. " [10] ,Port A Data Bit 10" "0,1" bitfld.long 0x00 9. " [9] ,Port A Data Bit 9" "0,1" textline " " bitfld.long 0x00 8. " [8] ,Port A Data Bit 8" "0,1" bitfld.long 0x00 7. " [7] ,Port A Data Bit 7" "0,1" bitfld.long 0x00 6. " [6] ,Port A Data Bit 6" "0,1" bitfld.long 0x00 5. " [5] ,Port A Data Bit 5" "0,1" textline " " bitfld.long 0x00 4. " [4] ,Port A Data Bit 4" "0,1" bitfld.long 0x00 3. " [3] ,Port A Data Bit 3" "0,1" bitfld.long 0x00 2. " [2] ,Port A Data Bit 2" "0,1" bitfld.long 0x00 1. " [1] ,Port A Data Bit 1" "0,1" textline " " bitfld.long 0x00 0. " [0] ,Port A Data Bit 0" "0,1" textline " " line.long 0x04 "SWPORTA_DDR,Port A Data Direction Register" bitfld.long 0x04 28. " SWPORTA_DDR_[28] ,Port A Data Direction Field 28" "Input,Output" bitfld.long 0x04 27. " [27] ,Port A Data Direction Field 27" "Input,Output" bitfld.long 0x04 26. " [26] ,Port A Data Direction Field 26" "Input,Output" bitfld.long 0x04 25. " [25] ,Port A Data Direction Field 25" "Input,Output" textline " " bitfld.long 0x04 24. " [24] ,Port A Data Direction Field 24" "Input,Output" bitfld.long 0x04 23. " [23] ,Port A Data Direction Field 23" "Input,Output" bitfld.long 0x04 22. " [22] ,Port A Data Direction Field 22" "Input,Output" bitfld.long 0x04 21. " [21] ,Port A Data Direction Field 21" "Input,Output" textline " " bitfld.long 0x04 20. " [20] ,Port A Data Direction Field 20" "Input,Output" bitfld.long 0x04 19. " [19] ,Port A Data Direction Field 19" "Input,Output" bitfld.long 0x04 18. " [18] ,Port A Data Direction Field 18" "Input,Output" bitfld.long 0x04 17. " [17] ,Port A Data Direction Field 17" "Input,Output" textline " " bitfld.long 0x04 16. " [16] ,Port A Data Direction Field 16" "Input,Output" bitfld.long 0x04 15. " [15] ,Port A Data Direction Field 15" "Input,Output" bitfld.long 0x04 14. " [14] ,Port A Data Direction Field 14" "Input,Output" bitfld.long 0x04 13. " [13] ,Port A Data Direction Field 13" "Input,Output" textline " " bitfld.long 0x04 12. " [12] ,Port A Data Direction Field 12" "Input,Output" bitfld.long 0x04 11. " [11] ,Port A Data Direction Field 11" "Input,Output" bitfld.long 0x04 10. " [10] ,Port A Data Direction Field 10" "Input,Output" bitfld.long 0x04 9. " [9] ,Port A Data Direction Field 9" "Input,Output" textline " " bitfld.long 0x04 8. " [8] ,Port A Data Direction Field 8" "Input,Output" bitfld.long 0x04 7. " [7] ,Port A Data Direction Field 7" "Input,Output" bitfld.long 0x04 6. " [6] ,Port A Data Direction Field 6" "Input,Output" bitfld.long 0x04 5. " [5] ,Port A Data Direction Field 5" "Input,Output" textline " " bitfld.long 0x04 4. " [4] ,Port A Data Direction Field 4" "Input,Output" bitfld.long 0x04 3. " [3] ,Port A Data Direction Field 3" "Input,Output" bitfld.long 0x04 2. " [2] ,Port A Data Direction Field 2" "Input,Output" bitfld.long 0x04 1. " [1] ,Port A Data Direction Field 1" "Input,Output" textline " " bitfld.long 0x04 0. " [0] ,Port A Data Direction Field 0" "Input,Output" textline " " group.long 0x30++0x1B line.long 0x00 "INTEN,Interrupt Enable Register" bitfld.long 0x00 28. " INTEN_[28] ,Interrupt Enable Field 28" "Disabled,Enabled" bitfld.long 0x00 27. " [27] ,Interrupt Enable Field 27" "Disabled,Enabled" bitfld.long 0x00 26. " [26] ,Interrupt Enable Field 26" "Disabled,Enabled" bitfld.long 0x00 25. " [25] ,Interrupt Enable Field 25" "Disabled,Enabled" textline " " bitfld.long 0x00 24. " [24] ,Interrupt Enable Field 24" "Disabled,Enabled" bitfld.long 0x00 23. " [23] ,Interrupt Enable Field 23" "Disabled,Enabled" bitfld.long 0x00 22. " [22] ,Interrupt Enable Field 22" "Disabled,Enabled" bitfld.long 0x00 21. " [21] ,Interrupt Enable Field 21" "Disabled,Enabled" textline " " bitfld.long 0x00 20. " [20] ,Interrupt Enable Field 20" "Disabled,Enabled" bitfld.long 0x00 19. " [19] ,Interrupt Enable Field 19" "Disabled,Enabled" bitfld.long 0x00 18. " [18] ,Interrupt Enable Field 18" "Disabled,Enabled" bitfld.long 0x00 17. " [17] ,Interrupt Enable Field 17" "Disabled,Enabled" textline " " bitfld.long 0x00 16. " [16] ,Interrupt Enable Field 16" "Disabled,Enabled" bitfld.long 0x00 15. " [15] ,Interrupt Enable Field 15" "Disabled,Enabled" bitfld.long 0x00 14. " [14] ,Interrupt Enable Field 14" "Disabled,Enabled" bitfld.long 0x00 13. " [13] ,Interrupt Enable Field 13" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " [12] ,Interrupt Enable Field 12" "Disabled,Enabled" bitfld.long 0x00 11. " [11] ,Interrupt Enable Field 11" "Disabled,Enabled" bitfld.long 0x00 10. " [10] ,Interrupt Enable Field 10" "Disabled,Enabled" bitfld.long 0x00 9. " [9] ,Interrupt Enable Field 9" "Disabled,Enabled" textline " " bitfld.long 0x00 8. " [8] ,Interrupt Enable Field 8" "Disabled,Enabled" bitfld.long 0x00 7. " [7] ,Interrupt Enable Field 7" "Disabled,Enabled" bitfld.long 0x00 6. " [6] ,Interrupt Enable Field 6" "Disabled,Enabled" bitfld.long 0x00 5. " [5] ,Interrupt Enable Field 5" "Disabled,Enabled" textline " " bitfld.long 0x00 4. " [4] ,Interrupt Enable Field 4" "Disabled,Enabled" bitfld.long 0x00 3. " [3] ,Interrupt Enable Field 3" "Disabled,Enabled" bitfld.long 0x00 2. " [2] ,Interrupt Enable Field 2" "Disabled,Enabled" bitfld.long 0x00 1. " [1] ,Interrupt Enable Field 1" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " [0] ,Interrupt Enable Field 0" "Disabled,Enabled" textline " " line.long 0x04 "INTMASK,Interrupt Mask Register" bitfld.long 0x04 28. " INTMASK_[28] ,Interrupt Mask Field 28" "Not masked,Masked" bitfld.long 0x04 27. " [27] ,Interrupt Mask Field 27" "Not masked,Masked" bitfld.long 0x04 26. " [26] ,Interrupt Mask Field 26" "Not masked,Masked" bitfld.long 0x04 25. " [25] ,Interrupt Mask Field 25" "Not masked,Masked" textline " " bitfld.long 0x04 24. " [24] ,Interrupt Mask Field 24" "Not masked,Masked" bitfld.long 0x04 23. " [23] ,Interrupt Mask Field 23" "Not masked,Masked" bitfld.long 0x04 22. " [22] ,Interrupt Mask Field 22" "Not masked,Masked" bitfld.long 0x04 21. " [21] ,Interrupt Mask Field 21" "Not masked,Masked" textline " " bitfld.long 0x04 20. " [20] ,Interrupt Mask Field 20" "Not masked,Masked" bitfld.long 0x04 19. " [19] ,Interrupt Mask Field 19" "Not masked,Masked" bitfld.long 0x04 18. " [18] ,Interrupt Mask Field 18" "Not masked,Masked" bitfld.long 0x04 17. " [17] ,Interrupt Mask Field 17" "Not masked,Masked" textline " " bitfld.long 0x04 16. " [16] ,Interrupt Mask Field 16" "Not masked,Masked" bitfld.long 0x04 15. " [15] ,Interrupt Mask Field 15" "Not masked,Masked" bitfld.long 0x04 14. " [14] ,Interrupt Mask Field 14" "Not masked,Masked" bitfld.long 0x04 13. " [13] ,Interrupt Mask Field 13" "Not masked,Masked" textline " " bitfld.long 0x04 12. " [12] ,Interrupt Mask Field 12" "Not masked,Masked" bitfld.long 0x04 11. " [11] ,Interrupt Mask Field 11" "Not masked,Masked" bitfld.long 0x04 10. " [10] ,Interrupt Mask Field 10" "Not masked,Masked" bitfld.long 0x04 9. " [9] ,Interrupt Mask Field 9" "Not masked,Masked" textline " " bitfld.long 0x04 8. " [8] ,Interrupt Mask Field 8" "Not masked,Masked" bitfld.long 0x04 7. " [7] ,Interrupt Mask Field 7" "Not masked,Masked" bitfld.long 0x04 6. " [6] ,Interrupt Mask Field 6" "Not masked,Masked" bitfld.long 0x04 5. " [5] ,Interrupt Mask Field 5" "Not masked,Masked" textline " " bitfld.long 0x04 4. " [4] ,Interrupt Mask Field 4" "Not masked,Masked" bitfld.long 0x04 3. " [3] ,Interrupt Mask Field 3" "Not masked,Masked" bitfld.long 0x04 2. " [2] ,Interrupt Mask Field 2" "Not masked,Masked" bitfld.long 0x04 1. " [1] ,Interrupt Mask Field 1" "Not masked,Masked" textline " " bitfld.long 0x04 0. " [0] ,Interrupt Mask Field 0" "Not masked,Masked" textline " " line.long 0x08 "INTTYPE_LEVEL,Interrupt Level Register" bitfld.long 0x08 28. " INTTYPE_LEVEL_[28] ,Interrupt Level Field 28" "Level,Edge" bitfld.long 0x08 27. " [27] ,Interrupt Level Field 27" "Level,Edge" bitfld.long 0x08 26. " [26] ,Interrupt Level Field 26" "Level,Edge" bitfld.long 0x08 25. " [25] ,Interrupt Level Field 25" "Level,Edge" textline " " bitfld.long 0x08 24. " [24] ,Interrupt Level Field 24" "Level,Edge" bitfld.long 0x08 23. " [23] ,Interrupt Level Field 23" "Level,Edge" bitfld.long 0x08 22. " [22] ,Interrupt Level Field 22" "Level,Edge" bitfld.long 0x08 21. " [21] ,Interrupt Level Field 21" "Level,Edge" textline " " bitfld.long 0x08 20. " [20] ,Interrupt Level Field 20" "Level,Edge" bitfld.long 0x08 19. " [19] ,Interrupt Level Field 19" "Level,Edge" bitfld.long 0x08 18. " [18] ,Interrupt Level Field 18" "Level,Edge" bitfld.long 0x08 17. " [17] ,Interrupt Level Field 17" "Level,Edge" textline " " bitfld.long 0x08 16. " [16] ,Interrupt Level Field 16" "Level,Edge" bitfld.long 0x08 15. " [15] ,Interrupt Level Field 15" "Level,Edge" bitfld.long 0x08 14. " [14] ,Interrupt Level Field 14" "Level,Edge" bitfld.long 0x08 13. " [13] ,Interrupt Level Field 13" "Level,Edge" textline " " bitfld.long 0x08 12. " [12] ,Interrupt Level Field 12" "Level,Edge" bitfld.long 0x08 11. " [11] ,Interrupt Level Field 11" "Level,Edge" bitfld.long 0x08 10. " [10] ,Interrupt Level Field 10" "Level,Edge" bitfld.long 0x08 9. " [9] ,Interrupt Level Field 9" "Level,Edge" textline " " bitfld.long 0x08 8. " [8] ,Interrupt Level Field 8" "Level,Edge" bitfld.long 0x08 7. " [7] ,Interrupt Level Field 7" "Level,Edge" bitfld.long 0x08 6. " [6] ,Interrupt Level Field 6" "Level,Edge" bitfld.long 0x08 5. " [5] ,Interrupt Level Field 5" "Level,Edge" textline " " bitfld.long 0x08 4. " [4] ,Interrupt Level Field 4" "Level,Edge" bitfld.long 0x08 3. " [3] ,Interrupt Level Field 3" "Level,Edge" bitfld.long 0x08 2. " [2] ,Interrupt Level Field 2" "Level,Edge" bitfld.long 0x08 1. " [1] ,Interrupt Level Field 1" "Level,Edge" textline " " bitfld.long 0x08 0. " [0] ,Interrupt Level Field 0" "Level,Edge" textline " " line.long 0x0C "INT_POLARITY,Interrupt Polarity Register" bitfld.long 0x0C 28. " INT_POLARITY_[28] ,Polarity Control Field 28" "Low,High" bitfld.long 0x0C 27. " [27] ,Polarity Control Field 27" "Low,High" bitfld.long 0x0C 26. " [26] ,Polarity Control Field 26" "Low,High" bitfld.long 0x0C 25. " [25] ,Polarity Control Field 25" "Low,High" textline " " bitfld.long 0x0C 24. " [24] ,Polarity Control Field 24" "Low,High" bitfld.long 0x0C 23. " [23] ,Polarity Control Field 23" "Low,High" bitfld.long 0x0C 22. " [22] ,Polarity Control Field 22" "Low,High" bitfld.long 0x0C 21. " [21] ,Polarity Control Field 21" "Low,High" textline " " bitfld.long 0x0C 20. " [20] ,Polarity Control Field 20" "Low,High" bitfld.long 0x0C 19. " [19] ,Polarity Control Field 19" "Low,High" bitfld.long 0x0C 18. " [18] ,Polarity Control Field 18" "Low,High" bitfld.long 0x0C 17. " [17] ,Polarity Control Field 17" "Low,High" textline " " bitfld.long 0x0C 16. " [16] ,Polarity Control Field 16" "Low,High" bitfld.long 0x0C 15. " [15] ,Polarity Control Field 15" "Low,High" bitfld.long 0x0C 14. " [14] ,Polarity Control Field 14" "Low,High" bitfld.long 0x0C 13. " [13] ,Polarity Control Field 13" "Low,High" textline " " bitfld.long 0x0C 12. " [12] ,Polarity Control Field 12" "Low,High" bitfld.long 0x0C 11. " [11] ,Polarity Control Field 11" "Low,High" bitfld.long 0x0C 10. " [10] ,Polarity Control Field 10" "Low,High" bitfld.long 0x0C 9. " [9] ,Polarity Control Field 9" "Low,High" textline " " bitfld.long 0x0C 8. " [8] ,Polarity Control Field 8" "Low,High" bitfld.long 0x0C 7. " [7] ,Polarity Control Field 7" "Low,High" bitfld.long 0x0C 6. " [6] ,Polarity Control Field 6" "Low,High" bitfld.long 0x0C 5. " [5] ,Polarity Control Field 5" "Low,High" textline " " bitfld.long 0x0C 4. " [4] ,Polarity Control Field 4" "Low,High" bitfld.long 0x0C 3. " [3] ,Polarity Control Field 3" "Low,High" bitfld.long 0x0C 2. " [2] ,Polarity Control Field 2" "Low,High" bitfld.long 0x0C 1. " [1] ,Polarity Control Field 1" "Low,High" textline " " bitfld.long 0x0C 0. " [0] ,Polarity Control Field 0" "Low,High" textline " " line.long 0x10 "INTSTATUS,Interrupt Status Register" bitfld.long 0x10 28. " INTSTATUS_[28] ,Interrupt Status Field 28" "No interrupt,Interrupt" bitfld.long 0x10 27. " [27] ,Interrupt Status Field 27" "No interrupt,Interrupt" bitfld.long 0x10 26. " [26] ,Interrupt Status Field 26" "No interrupt,Interrupt" bitfld.long 0x10 25. " [25] ,Interrupt Status Field 25" "No interrupt,Interrupt" textline " " bitfld.long 0x10 24. " [24] ,Interrupt Status Field 24" "No interrupt,Interrupt" bitfld.long 0x10 23. " [23] ,Interrupt Status Field 23" "No interrupt,Interrupt" bitfld.long 0x10 22. " [22] ,Interrupt Status Field 22" "No interrupt,Interrupt" bitfld.long 0x10 21. " [21] ,Interrupt Status Field 21" "No interrupt,Interrupt" textline " " bitfld.long 0x10 20. " [20] ,Interrupt Status Field 20" "No interrupt,Interrupt" bitfld.long 0x10 19. " [19] ,Interrupt Status Field 19" "No interrupt,Interrupt" bitfld.long 0x10 18. " [18] ,Interrupt Status Field 18" "No interrupt,Interrupt" bitfld.long 0x10 17. " [17] ,Interrupt Status Field 17" "No interrupt,Interrupt" textline " " bitfld.long 0x10 16. " [16] ,Interrupt Status Field 16" "No interrupt,Interrupt" bitfld.long 0x10 15. " [15] ,Interrupt Status Field 15" "No interrupt,Interrupt" bitfld.long 0x10 14. " [14] ,Interrupt Status Field 14" "No interrupt,Interrupt" bitfld.long 0x10 13. " [13] ,Interrupt Status Field 13" "No interrupt,Interrupt" textline " " bitfld.long 0x10 12. " [12] ,Interrupt Status Field 12" "No interrupt,Interrupt" bitfld.long 0x10 11. " [11] ,Interrupt Status Field 11" "No interrupt,Interrupt" bitfld.long 0x10 10. " [10] ,Interrupt Status Field 10" "No interrupt,Interrupt" bitfld.long 0x10 9. " [9] ,Interrupt Status Field 9" "No interrupt,Interrupt" textline " " bitfld.long 0x10 8. " [8] ,Interrupt Status Field 8" "No interrupt,Interrupt" bitfld.long 0x10 7. " [7] ,Interrupt Status Field 7" "No interrupt,Interrupt" bitfld.long 0x10 6. " [6] ,Interrupt Status Field 6" "No interrupt,Interrupt" bitfld.long 0x10 5. " [5] ,Interrupt Status Field 5" "No interrupt,Interrupt" textline " " bitfld.long 0x10 4. " [4] ,Interrupt Status Field 4" "No interrupt,Interrupt" bitfld.long 0x10 3. " [3] ,Interrupt Status Field 3" "No interrupt,Interrupt" bitfld.long 0x10 2. " [2] ,Interrupt Status Field 2" "No interrupt,Interrupt" bitfld.long 0x10 1. " [1] ,Interrupt Status Field 1" "No interrupt,Interrupt" textline " " bitfld.long 0x10 0. " [0] ,Interrupt Status Field 0" "No interrupt,Interrupt" textline " " line.long 0x14 "RAW_INTSTATUS,Raw Interrupt Status Register" bitfld.long 0x14 28. " RAW_INTSTATUS_[28] ,Raw Interrupt Status Field 28" "No interrupt,Interrupt" bitfld.long 0x14 27. " [27] ,Raw Interrupt Status Field 27" "No interrupt,Interrupt" bitfld.long 0x14 26. " [26] ,Raw Interrupt Status Field 26" "No interrupt,Interrupt" bitfld.long 0x14 25. " [25] ,Raw Interrupt Status Field 25" "No interrupt,Interrupt" textline " " bitfld.long 0x14 24. " [24] ,Raw Interrupt Status Field 24" "No interrupt,Interrupt" bitfld.long 0x14 23. " [23] ,Raw Interrupt Status Field 23" "No interrupt,Interrupt" bitfld.long 0x14 22. " [22] ,Raw Interrupt Status Field 22" "No interrupt,Interrupt" bitfld.long 0x14 21. " [21] ,Raw Interrupt Status Field 21" "No interrupt,Interrupt" textline " " bitfld.long 0x14 20. " [20] ,Raw Interrupt Status Field 20" "No interrupt,Interrupt" bitfld.long 0x14 19. " [19] ,Raw Interrupt Status Field 19" "No interrupt,Interrupt" bitfld.long 0x14 18. " [18] ,Raw Interrupt Status Field 18" "No interrupt,Interrupt" bitfld.long 0x14 17. " [17] ,Raw Interrupt Status Field 17" "No interrupt,Interrupt" textline " " bitfld.long 0x14 16. " [16] ,Raw Interrupt Status Field 16" "No interrupt,Interrupt" bitfld.long 0x14 15. " [15] ,Raw Interrupt Status Field 15" "No interrupt,Interrupt" bitfld.long 0x14 14. " [14] ,Raw Interrupt Status Field 14" "No interrupt,Interrupt" bitfld.long 0x14 13. " [13] ,Raw Interrupt Status Field 13" "No interrupt,Interrupt" textline " " bitfld.long 0x14 12. " [12] ,Raw Interrupt Status Field 12" "No interrupt,Interrupt" bitfld.long 0x14 11. " [11] ,Raw Interrupt Status Field 11" "No interrupt,Interrupt" bitfld.long 0x14 10. " [10] ,Raw Interrupt Status Field 10" "No interrupt,Interrupt" bitfld.long 0x14 9. " [9] ,Raw Interrupt Status Field 9" "No interrupt,Interrupt" textline " " bitfld.long 0x14 8. " [8] ,Raw Interrupt Status Field 8" "No interrupt,Interrupt" bitfld.long 0x14 7. " [7] ,Raw Interrupt Status Field 7" "No interrupt,Interrupt" bitfld.long 0x14 6. " [6] ,Raw Interrupt Status Field 6" "No interrupt,Interrupt" bitfld.long 0x14 5. " [5] ,Raw Interrupt Status Field 5" "No interrupt,Interrupt" textline " " bitfld.long 0x14 4. " [4] ,Raw Interrupt Status Field 4" "No interrupt,Interrupt" bitfld.long 0x14 3. " [3] ,Raw Interrupt Status Field 3" "No interrupt,Interrupt" bitfld.long 0x14 2. " [2] ,Raw Interrupt Status Field 2" "No interrupt,Interrupt" bitfld.long 0x14 1. " [1] ,Raw Interrupt Status Field 1" "No interrupt,Interrupt" textline " " bitfld.long 0x14 0. " [0] ,Raw Interrupt Status Field 0" "No interrupt,Interrupt" textline " " line.long 0x18 "DEBOUNCE,Debounce Enable Register" bitfld.long 0x18 28. " DEBOUNCE_[28] ,Debounce enable Field 28" "Disabled,Enabled" bitfld.long 0x18 27. " [27] ,Debounce enable Field 27" "Disabled,Enabled" bitfld.long 0x18 26. " [26] ,Debounce enable Field 26" "Disabled,Enabled" bitfld.long 0x18 25. " [25] ,Debounce enable Field 25" "Disabled,Enabled" textline " " bitfld.long 0x18 24. " [24] ,Debounce enable Field 24" "Disabled,Enabled" bitfld.long 0x18 23. " [23] ,Debounce enable Field 23" "Disabled,Enabled" bitfld.long 0x18 22. " [22] ,Debounce enable Field 22" "Disabled,Enabled" bitfld.long 0x18 21. " [21] ,Debounce enable Field 21" "Disabled,Enabled" textline " " bitfld.long 0x18 20. " [20] ,Debounce enable Field 20" "Disabled,Enabled" bitfld.long 0x18 19. " [19] ,Debounce enable Field 19" "Disabled,Enabled" bitfld.long 0x18 18. " [18] ,Debounce enable Field 18" "Disabled,Enabled" bitfld.long 0x18 17. " [17] ,Debounce enable Field 17" "Disabled,Enabled" textline " " bitfld.long 0x18 16. " [16] ,Debounce enable Field 16" "Disabled,Enabled" bitfld.long 0x18 15. " [15] ,Debounce enable Field 15" "Disabled,Enabled" bitfld.long 0x18 14. " [14] ,Debounce enable Field 14" "Disabled,Enabled" bitfld.long 0x18 13. " [13] ,Debounce enable Field 13" "Disabled,Enabled" textline " " bitfld.long 0x18 12. " [12] ,Debounce enable Field 12" "Disabled,Enabled" bitfld.long 0x18 11. " [11] ,Debounce enable Field 11" "Disabled,Enabled" bitfld.long 0x18 10. " [10] ,Debounce enable Field 10" "Disabled,Enabled" bitfld.long 0x18 9. " [9] ,Debounce enable Field 9" "Disabled,Enabled" textline " " bitfld.long 0x18 8. " [8] ,Debounce enable Field 8" "Disabled,Enabled" bitfld.long 0x18 7. " [7] ,Debounce enable Field 7" "Disabled,Enabled" bitfld.long 0x18 6. " [6] ,Debounce enable Field 6" "Disabled,Enabled" bitfld.long 0x18 5. " [5] ,Debounce enable Field 5" "Disabled,Enabled" textline " " bitfld.long 0x18 4. " [4] ,Debounce enable Field 4" "Disabled,Enabled" bitfld.long 0x18 3. " [3] ,Debounce enable Field 3" "Disabled,Enabled" bitfld.long 0x18 2. " [2] ,Debounce enable Field 2" "Disabled,Enabled" bitfld.long 0x18 1. " [1] ,Debounce enable Field 1" "Disabled,Enabled" textline " " bitfld.long 0x18 0. " [0] ,Debounce enable Field 0" "Disabled,Enabled" textline " " wgroup.long 0x4C++0x03 line.long 0x00 "PORTA_EOI,Clear Interrupt Register" bitfld.long 0x00 28. " PORTA_EOI_[28] ,Edge Interrupt Clear Field 28" "No effect,Clear" bitfld.long 0x00 27. " [27] ,Edge Interrupt Clear Field 27" "No effect,Clear" bitfld.long 0x00 26. " [26] ,Edge Interrupt Clear Field 26" "No effect,Clear" bitfld.long 0x00 25. " [25] ,Edge Interrupt Clear Field 25" "No effect,Clear" textline " " bitfld.long 0x00 24. " [24] ,Edge Interrupt Clear Field 24" "No effect,Clear" bitfld.long 0x00 23. " [23] ,Edge Interrupt Clear Field 23" "No effect,Clear" bitfld.long 0x00 22. " [22] ,Edge Interrupt Clear Field 22" "No effect,Clear" bitfld.long 0x00 21. " [21] ,Edge Interrupt Clear Field 21" "No effect,Clear" textline " " bitfld.long 0x00 20. " [20] ,Edge Interrupt Clear Field 20" "No effect,Clear" bitfld.long 0x00 19. " [19] ,Edge Interrupt Clear Field 19" "No effect,Clear" bitfld.long 0x00 18. " [18] ,Edge Interrupt Clear Field 18" "No effect,Clear" bitfld.long 0x00 17. " [17] ,Edge Interrupt Clear Field 17" "No effect,Clear" textline " " bitfld.long 0x00 16. " [16] ,Edge Interrupt Clear Field 16" "No effect,Clear" bitfld.long 0x00 15. " [15] ,Edge Interrupt Clear Field 15" "No effect,Clear" bitfld.long 0x00 14. " [14] ,Edge Interrupt Clear Field 14" "No effect,Clear" bitfld.long 0x00 13. " [13] ,Edge Interrupt Clear Field 13" "No effect,Clear" textline " " bitfld.long 0x00 12. " [12] ,Edge Interrupt Clear Field 12" "No effect,Clear" bitfld.long 0x00 11. " [11] ,Edge Interrupt Clear Field 11" "No effect,Clear" bitfld.long 0x00 10. " [10] ,Edge Interrupt Clear Field 10" "No effect,Clear" bitfld.long 0x00 9. " [9] ,Edge Interrupt Clear Field 9" "No effect,Clear" textline " " bitfld.long 0x00 8. " [8] ,Edge Interrupt Clear Field 8" "No effect,Clear" bitfld.long 0x00 7. " [7] ,Edge Interrupt Clear Field 7" "No effect,Clear" bitfld.long 0x00 6. " [6] ,Edge Interrupt Clear Field 6" "No effect,Clear" bitfld.long 0x00 5. " [5] ,Edge Interrupt Clear Field 5" "No effect,Clear" textline " " bitfld.long 0x00 4. " [4] ,Edge Interrupt Clear Field 4" "No effect,Clear" bitfld.long 0x00 3. " [3] ,Edge Interrupt Clear Field 3" "No effect,Clear" bitfld.long 0x00 2. " [2] ,Edge Interrupt Clear Field 2" "No effect,Clear" bitfld.long 0x00 1. " [1] ,Edge Interrupt Clear Field 1" "No effect,Clear" textline " " bitfld.long 0x00 0. " [0] ,Edge Interrupt Clear Field 0" "No effect,Clear" textline " " rgroup.long 0x50++0x03 line.long 0x00 "EXT_PORTA,External Port A Register" bitfld.long 0x00 28. " EXT_PORTA_[28] ,External Port Field 28" "0,1" bitfld.long 0x00 27. " [27] ,External Port Field 27" "0,1" bitfld.long 0x00 26. " [26] ,External Port Field 26" "0,1" bitfld.long 0x00 25. " [25] ,External Port Field 25" "0,1" textline " " bitfld.long 0x00 24. " [24] ,External Port Field 24" "0,1" bitfld.long 0x00 23. " [23] ,External Port Field 23" "0,1" bitfld.long 0x00 22. " [22] ,External Port Field 22" "0,1" bitfld.long 0x00 21. " [21] ,External Port Field 21" "0,1" textline " " bitfld.long 0x00 20. " [20] ,External Port Field 20" "0,1" bitfld.long 0x00 19. " [19] ,External Port Field 19" "0,1" bitfld.long 0x00 18. " [18] ,External Port Field 18" "0,1" bitfld.long 0x00 17. " [17] ,External Port Field 17" "0,1" textline " " bitfld.long 0x00 16. " [16] ,External Port Field 16" "0,1" bitfld.long 0x00 15. " [15] ,External Port Field 15" "0,1" bitfld.long 0x00 14. " [14] ,External Port Field 14" "0,1" bitfld.long 0x00 13. " [13] ,External Port Field 13" "0,1" textline " " bitfld.long 0x00 12. " [12] ,External Port Field 12" "0,1" bitfld.long 0x00 11. " [11] ,External Port Field 11" "0,1" bitfld.long 0x00 10. " [10] ,External Port Field 10" "0,1" bitfld.long 0x00 9. " [9] ,External Port Field 9" "0,1" textline " " bitfld.long 0x00 8. " [8] ,External Port Field 8" "0,1" bitfld.long 0x00 7. " [7] ,External Port Field 7" "0,1" bitfld.long 0x00 6. " [6] ,External Port Field 6" "0,1" bitfld.long 0x00 5. " [5] ,External Port Field 5" "0,1" textline " " bitfld.long 0x00 4. " [4] ,External Port Field 4" "0,1" bitfld.long 0x00 3. " [3] ,External Port Field 3" "0,1" bitfld.long 0x00 2. " [2] ,External Port Field 2" "0,1" bitfld.long 0x00 1. " [1] ,External Port Field 1" "0,1" textline " " bitfld.long 0x00 0. " [0] ,External Port Field 0" "0,1" textline " " group.long 0x60++0x03 line.long 0x00 "LS_SYNC,Synchronization Level Register" bitfld.long 0x00 0. " LS_SYNC ,Level-sensitive Interrupts Synchronization Enable" "Disabled,Enabled" width 15. rgroup.long 0x64++0x03 line.long 0x00 "ID_CODE,ID Code Register" rgroup.long 0x6C++0x0B line.long 0x00 "VER_ID_CODE,GPIO Version Register" line.long 0x04 "CONFIG_REG2,Configuration Register 2" bitfld.long 0x04 15.--19. " ENCODED_ID_PWIDTH_D ,Port D Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,,29 bits,?..." bitfld.long 0x04 10.--14. " ENCODED_ID_PWIDTH_C ,Port C Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,29 bits,?..." bitfld.long 0x04 5.--9. " ENCODED_ID_PWIDTH_B ,Port B Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,,29 bits,?..." textline " " bitfld.long 0x04 0.--4. " ENCODED_ID_PWIDTH_A ,Port A Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,,29 bits,?..." line.long 0x08 "CONFIG_REG1,Configuration Register 1" bitfld.long 0x08 16.--20. " ENCODED_ID_WIDTH ,Encoded ID Width Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x08 15. " GPIO_ID ,ID Field" "Disabled,Enabled" bitfld.long 0x08 14. " ADD_ENCODED_PARAMS ,Encoded GPIO Parameters Available" ",Enabled" textline " " bitfld.long 0x08 13. " DEBOUNCE ,Debounce Field" "Disabled,Enabled" bitfld.long 0x08 12. " PORTA_INTR ,Port A Interrupt Field" ",Enabled" textline " " bitfld.long 0x08 8. " HW_PORTA ,HW PORTA" "Disabled,Enabled" bitfld.long 0x08 7. " PORTD_SINGLE_CTL ,PORT D SINGLE CTL" ",Enabled" bitfld.long 0x08 6. " PORTC_SINGLE_CTL ,PORT C SINGLE CTL" ",Enabled" textline " " bitfld.long 0x08 5. " PORTB_SINGLE_CTL ,PORT B SINGLE CTL" ",Enabled" bitfld.long 0x08 4. " PORTA_SINGLE_CTL ,PORT A SINGLE CTL" ",Enabled" bitfld.long 0x08 2.--3. " NUM_PORTS ,NUM PORTS" "1,?..." textline " " bitfld.long 0x08 0.--1. " APB_DATA_WIDTH ,APB DATA WIDTH" ",,32-bits,?..." width 0x0B tree.end tree "GPIO 2" base ad:0xFF70A000 width 15. group.long 0x00++0x07 line.long 0x00 "SWPORTA_DR,Port A Data Register" bitfld.long 0x00 28. " SWPORTA_DR_[28] ,Port A Data Bit 28" "0,1" bitfld.long 0x00 27. " [27] ,Port A Data Bit 27" "0,1" bitfld.long 0x00 26. " [26] ,Port A Data Bit 26" "0,1" bitfld.long 0x00 25. " [25] ,Port A Data Bit 25" "0,1" textline " " bitfld.long 0x00 24. " [24] ,Port A Data Bit 24" "0,1" bitfld.long 0x00 23. " [23] ,Port A Data Bit 23" "0,1" bitfld.long 0x00 22. " [22] ,Port A Data Bit 22" "0,1" bitfld.long 0x00 21. " [21] ,Port A Data Bit 21" "0,1" textline " " bitfld.long 0x00 20. " [20] ,Port A Data Bit 20" "0,1" bitfld.long 0x00 19. " [19] ,Port A Data Bit 19" "0,1" bitfld.long 0x00 18. " [18] ,Port A Data Bit 18" "0,1" bitfld.long 0x00 17. " [17] ,Port A Data Bit 17" "0,1" textline " " bitfld.long 0x00 16. " [16] ,Port A Data Bit 16" "0,1" bitfld.long 0x00 15. " [15] ,Port A Data Bit 15" "0,1" bitfld.long 0x00 14. " [14] ,Port A Data Bit 14" "0,1" bitfld.long 0x00 13. " [13] ,Port A Data Bit 13" "0,1" textline " " bitfld.long 0x00 12. " [12] ,Port A Data Bit 12" "0,1" bitfld.long 0x00 11. " [11] ,Port A Data Bit 11" "0,1" bitfld.long 0x00 10. " [10] ,Port A Data Bit 10" "0,1" bitfld.long 0x00 9. " [9] ,Port A Data Bit 9" "0,1" textline " " bitfld.long 0x00 8. " [8] ,Port A Data Bit 8" "0,1" bitfld.long 0x00 7. " [7] ,Port A Data Bit 7" "0,1" bitfld.long 0x00 6. " [6] ,Port A Data Bit 6" "0,1" bitfld.long 0x00 5. " [5] ,Port A Data Bit 5" "0,1" textline " " bitfld.long 0x00 4. " [4] ,Port A Data Bit 4" "0,1" bitfld.long 0x00 3. " [3] ,Port A Data Bit 3" "0,1" bitfld.long 0x00 2. " [2] ,Port A Data Bit 2" "0,1" bitfld.long 0x00 1. " [1] ,Port A Data Bit 1" "0,1" textline " " bitfld.long 0x00 0. " [0] ,Port A Data Bit 0" "0,1" textline " " line.long 0x04 "SWPORTA_DDR,Port A Data Direction Register" bitfld.long 0x04 28. " SWPORTA_DDR_[28] ,Port A Data Direction Field 28" "Input,Output" bitfld.long 0x04 27. " [27] ,Port A Data Direction Field 27" "Input,Output" bitfld.long 0x04 26. " [26] ,Port A Data Direction Field 26" "Input,Output" bitfld.long 0x04 25. " [25] ,Port A Data Direction Field 25" "Input,Output" textline " " bitfld.long 0x04 24. " [24] ,Port A Data Direction Field 24" "Input,Output" bitfld.long 0x04 23. " [23] ,Port A Data Direction Field 23" "Input,Output" bitfld.long 0x04 22. " [22] ,Port A Data Direction Field 22" "Input,Output" bitfld.long 0x04 21. " [21] ,Port A Data Direction Field 21" "Input,Output" textline " " bitfld.long 0x04 20. " [20] ,Port A Data Direction Field 20" "Input,Output" bitfld.long 0x04 19. " [19] ,Port A Data Direction Field 19" "Input,Output" bitfld.long 0x04 18. " [18] ,Port A Data Direction Field 18" "Input,Output" bitfld.long 0x04 17. " [17] ,Port A Data Direction Field 17" "Input,Output" textline " " bitfld.long 0x04 16. " [16] ,Port A Data Direction Field 16" "Input,Output" bitfld.long 0x04 15. " [15] ,Port A Data Direction Field 15" "Input,Output" bitfld.long 0x04 14. " [14] ,Port A Data Direction Field 14" "Input,Output" bitfld.long 0x04 13. " [13] ,Port A Data Direction Field 13" "Input,Output" textline " " bitfld.long 0x04 12. " [12] ,Port A Data Direction Field 12" "Input,Output" bitfld.long 0x04 11. " [11] ,Port A Data Direction Field 11" "Input,Output" bitfld.long 0x04 10. " [10] ,Port A Data Direction Field 10" "Input,Output" bitfld.long 0x04 9. " [9] ,Port A Data Direction Field 9" "Input,Output" textline " " bitfld.long 0x04 8. " [8] ,Port A Data Direction Field 8" "Input,Output" bitfld.long 0x04 7. " [7] ,Port A Data Direction Field 7" "Input,Output" bitfld.long 0x04 6. " [6] ,Port A Data Direction Field 6" "Input,Output" bitfld.long 0x04 5. " [5] ,Port A Data Direction Field 5" "Input,Output" textline " " bitfld.long 0x04 4. " [4] ,Port A Data Direction Field 4" "Input,Output" bitfld.long 0x04 3. " [3] ,Port A Data Direction Field 3" "Input,Output" bitfld.long 0x04 2. " [2] ,Port A Data Direction Field 2" "Input,Output" bitfld.long 0x04 1. " [1] ,Port A Data Direction Field 1" "Input,Output" textline " " bitfld.long 0x04 0. " [0] ,Port A Data Direction Field 0" "Input,Output" textline " " group.long 0x30++0x1B line.long 0x00 "INTEN,Interrupt Enable Register" bitfld.long 0x00 28. " INTEN_[28] ,Interrupt Enable Field 28" "Disabled,Enabled" bitfld.long 0x00 27. " [27] ,Interrupt Enable Field 27" "Disabled,Enabled" bitfld.long 0x00 26. " [26] ,Interrupt Enable Field 26" "Disabled,Enabled" bitfld.long 0x00 25. " [25] ,Interrupt Enable Field 25" "Disabled,Enabled" textline " " bitfld.long 0x00 24. " [24] ,Interrupt Enable Field 24" "Disabled,Enabled" bitfld.long 0x00 23. " [23] ,Interrupt Enable Field 23" "Disabled,Enabled" bitfld.long 0x00 22. " [22] ,Interrupt Enable Field 22" "Disabled,Enabled" bitfld.long 0x00 21. " [21] ,Interrupt Enable Field 21" "Disabled,Enabled" textline " " bitfld.long 0x00 20. " [20] ,Interrupt Enable Field 20" "Disabled,Enabled" bitfld.long 0x00 19. " [19] ,Interrupt Enable Field 19" "Disabled,Enabled" bitfld.long 0x00 18. " [18] ,Interrupt Enable Field 18" "Disabled,Enabled" bitfld.long 0x00 17. " [17] ,Interrupt Enable Field 17" "Disabled,Enabled" textline " " bitfld.long 0x00 16. " [16] ,Interrupt Enable Field 16" "Disabled,Enabled" bitfld.long 0x00 15. " [15] ,Interrupt Enable Field 15" "Disabled,Enabled" bitfld.long 0x00 14. " [14] ,Interrupt Enable Field 14" "Disabled,Enabled" bitfld.long 0x00 13. " [13] ,Interrupt Enable Field 13" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " [12] ,Interrupt Enable Field 12" "Disabled,Enabled" bitfld.long 0x00 11. " [11] ,Interrupt Enable Field 11" "Disabled,Enabled" bitfld.long 0x00 10. " [10] ,Interrupt Enable Field 10" "Disabled,Enabled" bitfld.long 0x00 9. " [9] ,Interrupt Enable Field 9" "Disabled,Enabled" textline " " bitfld.long 0x00 8. " [8] ,Interrupt Enable Field 8" "Disabled,Enabled" bitfld.long 0x00 7. " [7] ,Interrupt Enable Field 7" "Disabled,Enabled" bitfld.long 0x00 6. " [6] ,Interrupt Enable Field 6" "Disabled,Enabled" bitfld.long 0x00 5. " [5] ,Interrupt Enable Field 5" "Disabled,Enabled" textline " " bitfld.long 0x00 4. " [4] ,Interrupt Enable Field 4" "Disabled,Enabled" bitfld.long 0x00 3. " [3] ,Interrupt Enable Field 3" "Disabled,Enabled" bitfld.long 0x00 2. " [2] ,Interrupt Enable Field 2" "Disabled,Enabled" bitfld.long 0x00 1. " [1] ,Interrupt Enable Field 1" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " [0] ,Interrupt Enable Field 0" "Disabled,Enabled" textline " " line.long 0x04 "INTMASK,Interrupt Mask Register" bitfld.long 0x04 28. " INTMASK_[28] ,Interrupt Mask Field 28" "Not masked,Masked" bitfld.long 0x04 27. " [27] ,Interrupt Mask Field 27" "Not masked,Masked" bitfld.long 0x04 26. " [26] ,Interrupt Mask Field 26" "Not masked,Masked" bitfld.long 0x04 25. " [25] ,Interrupt Mask Field 25" "Not masked,Masked" textline " " bitfld.long 0x04 24. " [24] ,Interrupt Mask Field 24" "Not masked,Masked" bitfld.long 0x04 23. " [23] ,Interrupt Mask Field 23" "Not masked,Masked" bitfld.long 0x04 22. " [22] ,Interrupt Mask Field 22" "Not masked,Masked" bitfld.long 0x04 21. " [21] ,Interrupt Mask Field 21" "Not masked,Masked" textline " " bitfld.long 0x04 20. " [20] ,Interrupt Mask Field 20" "Not masked,Masked" bitfld.long 0x04 19. " [19] ,Interrupt Mask Field 19" "Not masked,Masked" bitfld.long 0x04 18. " [18] ,Interrupt Mask Field 18" "Not masked,Masked" bitfld.long 0x04 17. " [17] ,Interrupt Mask Field 17" "Not masked,Masked" textline " " bitfld.long 0x04 16. " [16] ,Interrupt Mask Field 16" "Not masked,Masked" bitfld.long 0x04 15. " [15] ,Interrupt Mask Field 15" "Not masked,Masked" bitfld.long 0x04 14. " [14] ,Interrupt Mask Field 14" "Not masked,Masked" bitfld.long 0x04 13. " [13] ,Interrupt Mask Field 13" "Not masked,Masked" textline " " bitfld.long 0x04 12. " [12] ,Interrupt Mask Field 12" "Not masked,Masked" bitfld.long 0x04 11. " [11] ,Interrupt Mask Field 11" "Not masked,Masked" bitfld.long 0x04 10. " [10] ,Interrupt Mask Field 10" "Not masked,Masked" bitfld.long 0x04 9. " [9] ,Interrupt Mask Field 9" "Not masked,Masked" textline " " bitfld.long 0x04 8. " [8] ,Interrupt Mask Field 8" "Not masked,Masked" bitfld.long 0x04 7. " [7] ,Interrupt Mask Field 7" "Not masked,Masked" bitfld.long 0x04 6. " [6] ,Interrupt Mask Field 6" "Not masked,Masked" bitfld.long 0x04 5. " [5] ,Interrupt Mask Field 5" "Not masked,Masked" textline " " bitfld.long 0x04 4. " [4] ,Interrupt Mask Field 4" "Not masked,Masked" bitfld.long 0x04 3. " [3] ,Interrupt Mask Field 3" "Not masked,Masked" bitfld.long 0x04 2. " [2] ,Interrupt Mask Field 2" "Not masked,Masked" bitfld.long 0x04 1. " [1] ,Interrupt Mask Field 1" "Not masked,Masked" textline " " bitfld.long 0x04 0. " [0] ,Interrupt Mask Field 0" "Not masked,Masked" textline " " line.long 0x08 "INTTYPE_LEVEL,Interrupt Level Register" bitfld.long 0x08 28. " INTTYPE_LEVEL_[28] ,Interrupt Level Field 28" "Level,Edge" bitfld.long 0x08 27. " [27] ,Interrupt Level Field 27" "Level,Edge" bitfld.long 0x08 26. " [26] ,Interrupt Level Field 26" "Level,Edge" bitfld.long 0x08 25. " [25] ,Interrupt Level Field 25" "Level,Edge" textline " " bitfld.long 0x08 24. " [24] ,Interrupt Level Field 24" "Level,Edge" bitfld.long 0x08 23. " [23] ,Interrupt Level Field 23" "Level,Edge" bitfld.long 0x08 22. " [22] ,Interrupt Level Field 22" "Level,Edge" bitfld.long 0x08 21. " [21] ,Interrupt Level Field 21" "Level,Edge" textline " " bitfld.long 0x08 20. " [20] ,Interrupt Level Field 20" "Level,Edge" bitfld.long 0x08 19. " [19] ,Interrupt Level Field 19" "Level,Edge" bitfld.long 0x08 18. " [18] ,Interrupt Level Field 18" "Level,Edge" bitfld.long 0x08 17. " [17] ,Interrupt Level Field 17" "Level,Edge" textline " " bitfld.long 0x08 16. " [16] ,Interrupt Level Field 16" "Level,Edge" bitfld.long 0x08 15. " [15] ,Interrupt Level Field 15" "Level,Edge" bitfld.long 0x08 14. " [14] ,Interrupt Level Field 14" "Level,Edge" bitfld.long 0x08 13. " [13] ,Interrupt Level Field 13" "Level,Edge" textline " " bitfld.long 0x08 12. " [12] ,Interrupt Level Field 12" "Level,Edge" bitfld.long 0x08 11. " [11] ,Interrupt Level Field 11" "Level,Edge" bitfld.long 0x08 10. " [10] ,Interrupt Level Field 10" "Level,Edge" bitfld.long 0x08 9. " [9] ,Interrupt Level Field 9" "Level,Edge" textline " " bitfld.long 0x08 8. " [8] ,Interrupt Level Field 8" "Level,Edge" bitfld.long 0x08 7. " [7] ,Interrupt Level Field 7" "Level,Edge" bitfld.long 0x08 6. " [6] ,Interrupt Level Field 6" "Level,Edge" bitfld.long 0x08 5. " [5] ,Interrupt Level Field 5" "Level,Edge" textline " " bitfld.long 0x08 4. " [4] ,Interrupt Level Field 4" "Level,Edge" bitfld.long 0x08 3. " [3] ,Interrupt Level Field 3" "Level,Edge" bitfld.long 0x08 2. " [2] ,Interrupt Level Field 2" "Level,Edge" bitfld.long 0x08 1. " [1] ,Interrupt Level Field 1" "Level,Edge" textline " " bitfld.long 0x08 0. " [0] ,Interrupt Level Field 0" "Level,Edge" textline " " line.long 0x0C "INT_POLARITY,Interrupt Polarity Register" bitfld.long 0x0C 28. " INT_POLARITY_[28] ,Polarity Control Field 28" "Low,High" bitfld.long 0x0C 27. " [27] ,Polarity Control Field 27" "Low,High" bitfld.long 0x0C 26. " [26] ,Polarity Control Field 26" "Low,High" bitfld.long 0x0C 25. " [25] ,Polarity Control Field 25" "Low,High" textline " " bitfld.long 0x0C 24. " [24] ,Polarity Control Field 24" "Low,High" bitfld.long 0x0C 23. " [23] ,Polarity Control Field 23" "Low,High" bitfld.long 0x0C 22. " [22] ,Polarity Control Field 22" "Low,High" bitfld.long 0x0C 21. " [21] ,Polarity Control Field 21" "Low,High" textline " " bitfld.long 0x0C 20. " [20] ,Polarity Control Field 20" "Low,High" bitfld.long 0x0C 19. " [19] ,Polarity Control Field 19" "Low,High" bitfld.long 0x0C 18. " [18] ,Polarity Control Field 18" "Low,High" bitfld.long 0x0C 17. " [17] ,Polarity Control Field 17" "Low,High" textline " " bitfld.long 0x0C 16. " [16] ,Polarity Control Field 16" "Low,High" bitfld.long 0x0C 15. " [15] ,Polarity Control Field 15" "Low,High" bitfld.long 0x0C 14. " [14] ,Polarity Control Field 14" "Low,High" bitfld.long 0x0C 13. " [13] ,Polarity Control Field 13" "Low,High" textline " " bitfld.long 0x0C 12. " [12] ,Polarity Control Field 12" "Low,High" bitfld.long 0x0C 11. " [11] ,Polarity Control Field 11" "Low,High" bitfld.long 0x0C 10. " [10] ,Polarity Control Field 10" "Low,High" bitfld.long 0x0C 9. " [9] ,Polarity Control Field 9" "Low,High" textline " " bitfld.long 0x0C 8. " [8] ,Polarity Control Field 8" "Low,High" bitfld.long 0x0C 7. " [7] ,Polarity Control Field 7" "Low,High" bitfld.long 0x0C 6. " [6] ,Polarity Control Field 6" "Low,High" bitfld.long 0x0C 5. " [5] ,Polarity Control Field 5" "Low,High" textline " " bitfld.long 0x0C 4. " [4] ,Polarity Control Field 4" "Low,High" bitfld.long 0x0C 3. " [3] ,Polarity Control Field 3" "Low,High" bitfld.long 0x0C 2. " [2] ,Polarity Control Field 2" "Low,High" bitfld.long 0x0C 1. " [1] ,Polarity Control Field 1" "Low,High" textline " " bitfld.long 0x0C 0. " [0] ,Polarity Control Field 0" "Low,High" textline " " line.long 0x10 "INTSTATUS,Interrupt Status Register" bitfld.long 0x10 28. " INTSTATUS_[28] ,Interrupt Status Field 28" "No interrupt,Interrupt" bitfld.long 0x10 27. " [27] ,Interrupt Status Field 27" "No interrupt,Interrupt" bitfld.long 0x10 26. " [26] ,Interrupt Status Field 26" "No interrupt,Interrupt" bitfld.long 0x10 25. " [25] ,Interrupt Status Field 25" "No interrupt,Interrupt" textline " " bitfld.long 0x10 24. " [24] ,Interrupt Status Field 24" "No interrupt,Interrupt" bitfld.long 0x10 23. " [23] ,Interrupt Status Field 23" "No interrupt,Interrupt" bitfld.long 0x10 22. " [22] ,Interrupt Status Field 22" "No interrupt,Interrupt" bitfld.long 0x10 21. " [21] ,Interrupt Status Field 21" "No interrupt,Interrupt" textline " " bitfld.long 0x10 20. " [20] ,Interrupt Status Field 20" "No interrupt,Interrupt" bitfld.long 0x10 19. " [19] ,Interrupt Status Field 19" "No interrupt,Interrupt" bitfld.long 0x10 18. " [18] ,Interrupt Status Field 18" "No interrupt,Interrupt" bitfld.long 0x10 17. " [17] ,Interrupt Status Field 17" "No interrupt,Interrupt" textline " " bitfld.long 0x10 16. " [16] ,Interrupt Status Field 16" "No interrupt,Interrupt" bitfld.long 0x10 15. " [15] ,Interrupt Status Field 15" "No interrupt,Interrupt" bitfld.long 0x10 14. " [14] ,Interrupt Status Field 14" "No interrupt,Interrupt" bitfld.long 0x10 13. " [13] ,Interrupt Status Field 13" "No interrupt,Interrupt" textline " " bitfld.long 0x10 12. " [12] ,Interrupt Status Field 12" "No interrupt,Interrupt" bitfld.long 0x10 11. " [11] ,Interrupt Status Field 11" "No interrupt,Interrupt" bitfld.long 0x10 10. " [10] ,Interrupt Status Field 10" "No interrupt,Interrupt" bitfld.long 0x10 9. " [9] ,Interrupt Status Field 9" "No interrupt,Interrupt" textline " " bitfld.long 0x10 8. " [8] ,Interrupt Status Field 8" "No interrupt,Interrupt" bitfld.long 0x10 7. " [7] ,Interrupt Status Field 7" "No interrupt,Interrupt" bitfld.long 0x10 6. " [6] ,Interrupt Status Field 6" "No interrupt,Interrupt" bitfld.long 0x10 5. " [5] ,Interrupt Status Field 5" "No interrupt,Interrupt" textline " " bitfld.long 0x10 4. " [4] ,Interrupt Status Field 4" "No interrupt,Interrupt" bitfld.long 0x10 3. " [3] ,Interrupt Status Field 3" "No interrupt,Interrupt" bitfld.long 0x10 2. " [2] ,Interrupt Status Field 2" "No interrupt,Interrupt" bitfld.long 0x10 1. " [1] ,Interrupt Status Field 1" "No interrupt,Interrupt" textline " " bitfld.long 0x10 0. " [0] ,Interrupt Status Field 0" "No interrupt,Interrupt" textline " " line.long 0x14 "RAW_INTSTATUS,Raw Interrupt Status Register" bitfld.long 0x14 28. " RAW_INTSTATUS_[28] ,Raw Interrupt Status Field 28" "No interrupt,Interrupt" bitfld.long 0x14 27. " [27] ,Raw Interrupt Status Field 27" "No interrupt,Interrupt" bitfld.long 0x14 26. " [26] ,Raw Interrupt Status Field 26" "No interrupt,Interrupt" bitfld.long 0x14 25. " [25] ,Raw Interrupt Status Field 25" "No interrupt,Interrupt" textline " " bitfld.long 0x14 24. " [24] ,Raw Interrupt Status Field 24" "No interrupt,Interrupt" bitfld.long 0x14 23. " [23] ,Raw Interrupt Status Field 23" "No interrupt,Interrupt" bitfld.long 0x14 22. " [22] ,Raw Interrupt Status Field 22" "No interrupt,Interrupt" bitfld.long 0x14 21. " [21] ,Raw Interrupt Status Field 21" "No interrupt,Interrupt" textline " " bitfld.long 0x14 20. " [20] ,Raw Interrupt Status Field 20" "No interrupt,Interrupt" bitfld.long 0x14 19. " [19] ,Raw Interrupt Status Field 19" "No interrupt,Interrupt" bitfld.long 0x14 18. " [18] ,Raw Interrupt Status Field 18" "No interrupt,Interrupt" bitfld.long 0x14 17. " [17] ,Raw Interrupt Status Field 17" "No interrupt,Interrupt" textline " " bitfld.long 0x14 16. " [16] ,Raw Interrupt Status Field 16" "No interrupt,Interrupt" bitfld.long 0x14 15. " [15] ,Raw Interrupt Status Field 15" "No interrupt,Interrupt" bitfld.long 0x14 14. " [14] ,Raw Interrupt Status Field 14" "No interrupt,Interrupt" bitfld.long 0x14 13. " [13] ,Raw Interrupt Status Field 13" "No interrupt,Interrupt" textline " " bitfld.long 0x14 12. " [12] ,Raw Interrupt Status Field 12" "No interrupt,Interrupt" bitfld.long 0x14 11. " [11] ,Raw Interrupt Status Field 11" "No interrupt,Interrupt" bitfld.long 0x14 10. " [10] ,Raw Interrupt Status Field 10" "No interrupt,Interrupt" bitfld.long 0x14 9. " [9] ,Raw Interrupt Status Field 9" "No interrupt,Interrupt" textline " " bitfld.long 0x14 8. " [8] ,Raw Interrupt Status Field 8" "No interrupt,Interrupt" bitfld.long 0x14 7. " [7] ,Raw Interrupt Status Field 7" "No interrupt,Interrupt" bitfld.long 0x14 6. " [6] ,Raw Interrupt Status Field 6" "No interrupt,Interrupt" bitfld.long 0x14 5. " [5] ,Raw Interrupt Status Field 5" "No interrupt,Interrupt" textline " " bitfld.long 0x14 4. " [4] ,Raw Interrupt Status Field 4" "No interrupt,Interrupt" bitfld.long 0x14 3. " [3] ,Raw Interrupt Status Field 3" "No interrupt,Interrupt" bitfld.long 0x14 2. " [2] ,Raw Interrupt Status Field 2" "No interrupt,Interrupt" bitfld.long 0x14 1. " [1] ,Raw Interrupt Status Field 1" "No interrupt,Interrupt" textline " " bitfld.long 0x14 0. " [0] ,Raw Interrupt Status Field 0" "No interrupt,Interrupt" textline " " line.long 0x18 "DEBOUNCE,Debounce Enable Register" bitfld.long 0x18 28. " DEBOUNCE_[28] ,Debounce enable Field 28" "Disabled,Enabled" bitfld.long 0x18 27. " [27] ,Debounce enable Field 27" "Disabled,Enabled" bitfld.long 0x18 26. " [26] ,Debounce enable Field 26" "Disabled,Enabled" bitfld.long 0x18 25. " [25] ,Debounce enable Field 25" "Disabled,Enabled" textline " " bitfld.long 0x18 24. " [24] ,Debounce enable Field 24" "Disabled,Enabled" bitfld.long 0x18 23. " [23] ,Debounce enable Field 23" "Disabled,Enabled" bitfld.long 0x18 22. " [22] ,Debounce enable Field 22" "Disabled,Enabled" bitfld.long 0x18 21. " [21] ,Debounce enable Field 21" "Disabled,Enabled" textline " " bitfld.long 0x18 20. " [20] ,Debounce enable Field 20" "Disabled,Enabled" bitfld.long 0x18 19. " [19] ,Debounce enable Field 19" "Disabled,Enabled" bitfld.long 0x18 18. " [18] ,Debounce enable Field 18" "Disabled,Enabled" bitfld.long 0x18 17. " [17] ,Debounce enable Field 17" "Disabled,Enabled" textline " " bitfld.long 0x18 16. " [16] ,Debounce enable Field 16" "Disabled,Enabled" bitfld.long 0x18 15. " [15] ,Debounce enable Field 15" "Disabled,Enabled" bitfld.long 0x18 14. " [14] ,Debounce enable Field 14" "Disabled,Enabled" bitfld.long 0x18 13. " [13] ,Debounce enable Field 13" "Disabled,Enabled" textline " " bitfld.long 0x18 12. " [12] ,Debounce enable Field 12" "Disabled,Enabled" bitfld.long 0x18 11. " [11] ,Debounce enable Field 11" "Disabled,Enabled" bitfld.long 0x18 10. " [10] ,Debounce enable Field 10" "Disabled,Enabled" bitfld.long 0x18 9. " [9] ,Debounce enable Field 9" "Disabled,Enabled" textline " " bitfld.long 0x18 8. " [8] ,Debounce enable Field 8" "Disabled,Enabled" bitfld.long 0x18 7. " [7] ,Debounce enable Field 7" "Disabled,Enabled" bitfld.long 0x18 6. " [6] ,Debounce enable Field 6" "Disabled,Enabled" bitfld.long 0x18 5. " [5] ,Debounce enable Field 5" "Disabled,Enabled" textline " " bitfld.long 0x18 4. " [4] ,Debounce enable Field 4" "Disabled,Enabled" bitfld.long 0x18 3. " [3] ,Debounce enable Field 3" "Disabled,Enabled" bitfld.long 0x18 2. " [2] ,Debounce enable Field 2" "Disabled,Enabled" bitfld.long 0x18 1. " [1] ,Debounce enable Field 1" "Disabled,Enabled" textline " " bitfld.long 0x18 0. " [0] ,Debounce enable Field 0" "Disabled,Enabled" textline " " wgroup.long 0x4C++0x03 line.long 0x00 "PORTA_EOI,Clear Interrupt Register" bitfld.long 0x00 28. " PORTA_EOI_[28] ,Edge Interrupt Clear Field 28" "No effect,Clear" bitfld.long 0x00 27. " [27] ,Edge Interrupt Clear Field 27" "No effect,Clear" bitfld.long 0x00 26. " [26] ,Edge Interrupt Clear Field 26" "No effect,Clear" bitfld.long 0x00 25. " [25] ,Edge Interrupt Clear Field 25" "No effect,Clear" textline " " bitfld.long 0x00 24. " [24] ,Edge Interrupt Clear Field 24" "No effect,Clear" bitfld.long 0x00 23. " [23] ,Edge Interrupt Clear Field 23" "No effect,Clear" bitfld.long 0x00 22. " [22] ,Edge Interrupt Clear Field 22" "No effect,Clear" bitfld.long 0x00 21. " [21] ,Edge Interrupt Clear Field 21" "No effect,Clear" textline " " bitfld.long 0x00 20. " [20] ,Edge Interrupt Clear Field 20" "No effect,Clear" bitfld.long 0x00 19. " [19] ,Edge Interrupt Clear Field 19" "No effect,Clear" bitfld.long 0x00 18. " [18] ,Edge Interrupt Clear Field 18" "No effect,Clear" bitfld.long 0x00 17. " [17] ,Edge Interrupt Clear Field 17" "No effect,Clear" textline " " bitfld.long 0x00 16. " [16] ,Edge Interrupt Clear Field 16" "No effect,Clear" bitfld.long 0x00 15. " [15] ,Edge Interrupt Clear Field 15" "No effect,Clear" bitfld.long 0x00 14. " [14] ,Edge Interrupt Clear Field 14" "No effect,Clear" bitfld.long 0x00 13. " [13] ,Edge Interrupt Clear Field 13" "No effect,Clear" textline " " bitfld.long 0x00 12. " [12] ,Edge Interrupt Clear Field 12" "No effect,Clear" bitfld.long 0x00 11. " [11] ,Edge Interrupt Clear Field 11" "No effect,Clear" bitfld.long 0x00 10. " [10] ,Edge Interrupt Clear Field 10" "No effect,Clear" bitfld.long 0x00 9. " [9] ,Edge Interrupt Clear Field 9" "No effect,Clear" textline " " bitfld.long 0x00 8. " [8] ,Edge Interrupt Clear Field 8" "No effect,Clear" bitfld.long 0x00 7. " [7] ,Edge Interrupt Clear Field 7" "No effect,Clear" bitfld.long 0x00 6. " [6] ,Edge Interrupt Clear Field 6" "No effect,Clear" bitfld.long 0x00 5. " [5] ,Edge Interrupt Clear Field 5" "No effect,Clear" textline " " bitfld.long 0x00 4. " [4] ,Edge Interrupt Clear Field 4" "No effect,Clear" bitfld.long 0x00 3. " [3] ,Edge Interrupt Clear Field 3" "No effect,Clear" bitfld.long 0x00 2. " [2] ,Edge Interrupt Clear Field 2" "No effect,Clear" bitfld.long 0x00 1. " [1] ,Edge Interrupt Clear Field 1" "No effect,Clear" textline " " bitfld.long 0x00 0. " [0] ,Edge Interrupt Clear Field 0" "No effect,Clear" textline " " rgroup.long 0x50++0x03 line.long 0x00 "EXT_PORTA,External Port A Register" bitfld.long 0x00 28. " EXT_PORTA_[28] ,External Port Field 28" "0,1" bitfld.long 0x00 27. " [27] ,External Port Field 27" "0,1" bitfld.long 0x00 26. " [26] ,External Port Field 26" "0,1" bitfld.long 0x00 25. " [25] ,External Port Field 25" "0,1" textline " " bitfld.long 0x00 24. " [24] ,External Port Field 24" "0,1" bitfld.long 0x00 23. " [23] ,External Port Field 23" "0,1" bitfld.long 0x00 22. " [22] ,External Port Field 22" "0,1" bitfld.long 0x00 21. " [21] ,External Port Field 21" "0,1" textline " " bitfld.long 0x00 20. " [20] ,External Port Field 20" "0,1" bitfld.long 0x00 19. " [19] ,External Port Field 19" "0,1" bitfld.long 0x00 18. " [18] ,External Port Field 18" "0,1" bitfld.long 0x00 17. " [17] ,External Port Field 17" "0,1" textline " " bitfld.long 0x00 16. " [16] ,External Port Field 16" "0,1" bitfld.long 0x00 15. " [15] ,External Port Field 15" "0,1" bitfld.long 0x00 14. " [14] ,External Port Field 14" "0,1" bitfld.long 0x00 13. " [13] ,External Port Field 13" "0,1" textline " " bitfld.long 0x00 12. " [12] ,External Port Field 12" "0,1" bitfld.long 0x00 11. " [11] ,External Port Field 11" "0,1" bitfld.long 0x00 10. " [10] ,External Port Field 10" "0,1" bitfld.long 0x00 9. " [9] ,External Port Field 9" "0,1" textline " " bitfld.long 0x00 8. " [8] ,External Port Field 8" "0,1" bitfld.long 0x00 7. " [7] ,External Port Field 7" "0,1" bitfld.long 0x00 6. " [6] ,External Port Field 6" "0,1" bitfld.long 0x00 5. " [5] ,External Port Field 5" "0,1" textline " " bitfld.long 0x00 4. " [4] ,External Port Field 4" "0,1" bitfld.long 0x00 3. " [3] ,External Port Field 3" "0,1" bitfld.long 0x00 2. " [2] ,External Port Field 2" "0,1" bitfld.long 0x00 1. " [1] ,External Port Field 1" "0,1" textline " " bitfld.long 0x00 0. " [0] ,External Port Field 0" "0,1" textline " " group.long 0x60++0x03 line.long 0x00 "LS_SYNC,Synchronization Level Register" bitfld.long 0x00 0. " LS_SYNC ,Level-sensitive Interrupts Synchronization Enable" "Disabled,Enabled" width 15. rgroup.long 0x64++0x03 line.long 0x00 "ID_CODE,ID Code Register" rgroup.long 0x6C++0x0B line.long 0x00 "VER_ID_CODE,GPIO Version Register" line.long 0x04 "CONFIG_REG2,Configuration Register 2" bitfld.long 0x04 15.--19. " ENCODED_ID_PWIDTH_D ,Port D Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,,29 bits,?..." bitfld.long 0x04 10.--14. " ENCODED_ID_PWIDTH_C ,Port C Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,29 bits,?..." bitfld.long 0x04 5.--9. " ENCODED_ID_PWIDTH_B ,Port B Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,,29 bits,?..." textline " " bitfld.long 0x04 0.--4. " ENCODED_ID_PWIDTH_A ,Port A Width (less 1)" ",,,,,,,8 bits,,,,,,,,,,,,,,,,,,,,,29 bits,?..." line.long 0x08 "CONFIG_REG1,Configuration Register 1" bitfld.long 0x08 16.--20. " ENCODED_ID_WIDTH ,Encoded ID Width Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x08 15. " GPIO_ID ,ID Field" "Disabled,Enabled" bitfld.long 0x08 14. " ADD_ENCODED_PARAMS ,Encoded GPIO Parameters Available" ",Enabled" textline " " bitfld.long 0x08 13. " DEBOUNCE ,Debounce Field" "Disabled,Enabled" bitfld.long 0x08 12. " PORTA_INTR ,Port A Interrupt Field" ",Enabled" textline " " bitfld.long 0x08 8. " HW_PORTA ,HW PORTA" "Disabled,Enabled" bitfld.long 0x08 7. " PORTD_SINGLE_CTL ,PORT D SINGLE CTL" ",Enabled" bitfld.long 0x08 6. " PORTC_SINGLE_CTL ,PORT C SINGLE CTL" ",Enabled" textline " " bitfld.long 0x08 5. " PORTB_SINGLE_CTL ,PORT B SINGLE CTL" ",Enabled" bitfld.long 0x08 4. " PORTA_SINGLE_CTL ,PORT A SINGLE CTL" ",Enabled" bitfld.long 0x08 2.--3. " NUM_PORTS ,NUM PORTS" "1,?..." textline " " bitfld.long 0x08 0.--1. " APB_DATA_WIDTH ,APB DATA WIDTH" ",,32-bits,?..." width 0x0B tree.end tree.end tree "L3REGS (L3 GPV Registers)" base ad:0xFF800000 width 7. wgroup.long 0x00++0x3 line.long 0x00 "REMAP,Remap" bitfld.long 0x00 4. " LWHPS2FPGA ,LWHPS2FPGA AXI Bridge Visibility" "Not visible,Visible" bitfld.long 0x00 3. " HPS2FPGA ,HPS2FPGA AXI Bridge Visibility" "Not visible,Visible" bitfld.long 0x00 1. " NONMPUZERO ,Non-MPU at 0x0" "SDRAM,OCRAM" textline " " bitfld.long 0x00 0. " MPUZERO ,MPU at 0x0" "Boot ROM,On-chip RAM" width 16. tree "SECGRP (Security Register Group)" wgroup.long 0x8++0x1B line.long 0x00 "L4MAIN,L4 Main Peripherals Security" bitfld.long 0x00 3. " DMANONSECURE ,DMA Non-secure Security" "Secure,Non-secure" bitfld.long 0x00 2. " DMASECURE ,DMA Secure Security" "Secure,Non-secure" bitfld.long 0x00 1. " SPIS1 ,SPI Slave 1 Security" "Secure,Non-secure" textline " " bitfld.long 0x00 0. " SPIS0 ,SPI Slave 0 Security" "Secure,Non-secure" line.long 0x04 "L4SP,L4 SP Peripherals Security" bitfld.long 0x04 10. " SPTIMER1 ,SP Timer 1 Security" "Secure,Non-secure" bitfld.long 0x04 9. " CAN1 ,CAN 1 Security" "Secure,Non-secure" bitfld.long 0x04 8. " CAN0 ,CAN 0 Security" "Secure,Non-secure" textline " " bitfld.long 0x04 7. " UART1 ,UART 1 Security" "Secure,Non-secure" bitfld.long 0x04 6. " UART0 ,UART 0 Security" "Secure,Non-secure" bitfld.long 0x04 5. " I2C3 ,I2C3 (EMAC 1) Security" "Secure,Non-secure" textline " " bitfld.long 0x04 4. " I2C2 ,I2C3 (EMAC 0) Security" "Secure,Non-secure" bitfld.long 0x04 3. " I2C1 ,I2C1 Security" "Secure,Non-secure" bitfld.long 0x04 2. " I2C0 ,I2C0 Security" "Secure,Non-secure" textline " " bitfld.long 0x04 1. " SPTIMER0 ,SP Timer 0 Security" "Secure,Non-secure" bitfld.long 0x04 0. " SDRREGS ,SDRAM Registers Security" "Secure,Non-secure" line.long 0x08 "L4MP,L4 MP Peripherals Security" bitfld.long 0x08 9. " GPIO2 ,GPIO 2 Security" "Secure,Non-secure" bitfld.long 0x08 8. " GPIO1 ,GPIO 1 Security" "Secure,Non-secure" bitfld.long 0x08 7. " GPIO0 ,GPIO 0 Security" "Secure,Non-secure" textline " " bitfld.long 0x08 6. " ACPIDMAP ,ACP ID Mapper Security" "Secure,Non-secure" bitfld.long 0x08 5. " EMAC1 ,EMAC 1 Security" "Secure,Non-secure" bitfld.long 0x08 4. " EMAC0 ,EMAC 0` Security" "Secure,Non-secure" textline " " bitfld.long 0x08 3. " SDMMC ,SDMMC Security" "Secure,Non-secure" bitfld.long 0x08 2. " QSPIREGS ,QSPI Registers Security" "Secure,Non-secure" bitfld.long 0x08 1. " DAP ,DAP Security" "Secure,Non-secure" textline " " bitfld.long 0x08 0. " FPGAMGRREGS ,FPGA Manager Register Security" "Secure,Non-secure" line.long 0x0C "L4OSC1,L4 OSC1 Peripherals Security" bitfld.long 0x0C 6. " OSC1TIMER1 ,OSC1 Timer 1 Security" "Secure,Non-secure" bitfld.long 0x0C 5. " OSC1TIMER0 ,OSC1 Timer 0 Security" "Secure,Non-secure" bitfld.long 0x0C 4. " SYSMGR ,System Manager Security" "Secure,Non-secure" textline " " bitfld.long 0x0C 3. " RSTMGR ,Reset Manager Security" "Secure,Non-secure" bitfld.long 0x0C 2. " CLKMGR ,Clock Manager Security" "Secure,Non-secure" bitfld.long 0x0C 1. " L4WD1 ,L4 Watchdog Timer 0 Security" "Secure,Non-secure" textline " " bitfld.long 0x0C 0. " L4WD0 ,L4 Watchdog Timer 0 Security" "Secure,Non-secure" line.long 0x10 "L4SPIM,L4 SPIM Peripherals Security" bitfld.long 0x10 2. " SCANMGR ,Scan Manager Security" "Secure,Non-secure" bitfld.long 0x10 1. " SPIM1 ,SPI Master 1 Security" "Secure,Non-secure" bitfld.long 0x10 0. " SPIM0 ,SPI Master 0 Security" "Secure,Non-secure" line.long 0x14 "STM,STM Peripheral Security" bitfld.long 0x14 0. " S ,STM Peripheral Security" "Secure,Non-secure" line.long 0x18 "LWHPS2FPGAREGS,LWHPS2FPGA AXI Bridge Registers Peripheral Security" bitfld.long 0x18 0. " S ,LWHPS2FPGA AXI Bridge Registers Security" "Secure,Non-secure" wgroup.long 0x20++0x7 line.long 0x00 "USB1,USB1 Registers Peripheral Security" bitfld.long 0x00 0. " S ,USB1 Registers Security" "Secure,Non-secure" line.long 0x04 "NANDDATA,NAND Flash Controller Data Peripheral Security" bitfld.long 0x04 0. " S ,NAND Flash Controller Data Security" "Secure,Non-secure" wgroup.long 0x78++0x23 line.long 0x00 "USB0,USB0 Registers Peripheral Security" bitfld.long 0x00 0. " S ,USB0 Registers Security" "Secure,Non-secure" line.long 0x04 "NANDREGS,NAND Flash Controller Registers Peripheral Security" bitfld.long 0x04 0. " S ,NAND Flash Controller Registers Security" "Secure,Non-secure" line.long 0x08 "QSPIDATA,QSPI Flash Controller Data Peripheral Security" bitfld.long 0x08 0. " S ,QSPI Flash Controller Data Security" "Secure,Non-secure" line.long 0x0C "FPGAMGRDATA,FPGA Manager Data Peripheral Security" bitfld.long 0x0C 0. " S ,FPGA Manager Data Security" "Secure,Non-secure" line.long 0x10 "HPS2FPGAREGS,HPS2FPGA AXI Bridge Registers Peripheral Security" bitfld.long 0x10 0. " S ,HPS2FPGA AXI Bridge Registers Security" "Secure,Non-secure" line.long 0x14 "ACP,MPU ACP Peripheral Security" bitfld.long 0x14 0. " S ,MPU ACP Security" "Secure,Non-secure" line.long 0x18 "ROM,ROM Peripheral Security" bitfld.long 0x18 0. " S ,ROM Security" "Secure,Non-secure" line.long 0x1C "OCRAM,On-chip RAM Peripheral Security" bitfld.long 0x1C 0. " S ,On-chip RAM Security" "Secure,Non-secure" line.long 0x20 "SDRDATA,SDRAM Data Peripheral Security" bitfld.long 0x20 0. " S ,SDRAM Data Security" "Secure,Non-secure" tree.end width 13. tree "IDGRP (ID Register Group)" rgroup.long 0x1FD0++0x3 line.long 0x00 "PERIPH_ID_4,Peripheral ID4 Register" hexmask.long.byte 0x00 0.--7. 1. " PERIPH_ID_4 ,Peripheral ID4" rgroup.long 0x1FE0++0x1F line.long 0x00 "PERIPH_ID_0,Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PN7TO0 ,Part Number [7:0]" line.long 0x04 "PERIPH_ID_1,Peripheral ID0 Register" hexmask.long.byte 0x04 0.--7. 1. " JEP3TO0_PN11TO8 ,JEP106[3:0]/Part Number [11:8]" line.long 0x08 "PERIPH_ID_2,Peripheral ID0 Register" hexmask.long.byte 0x08 0.--7. 1. " REV_JEPCODE_JEP6TO4 ,Revision/JEP106 code flag/JEP106[6:4]" line.long 0x0C "PERIPH_ID_3,Peripheral ID0 Register" bitfld.long 0x0C 4.--7. " REV_AND ,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0C 0.--3. " CUST_MOD_NUM ,Customer Model Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x10 "COMP_ID_0,Component ID0 Register" hexmask.long.byte 0x10 0.--7. 1. " PREAMBLE ,Preamble" line.long 0x14 "COMP_ID_1,Component ID1 Register" hexmask.long.byte 0x14 0.--7. 1. " GENIPCOMPCLS_PREAMBLE ,Generic IP component class/Preamble" line.long 0x18 "COMP_ID_2,Component ID2 Register" hexmask.long.byte 0x18 0.--7. 1. " PREAMBLE ,Preamble" line.long 0x1C "COMP_ID_3,Component ID3 Register" hexmask.long.byte 0x1C 0.--7. 1. " PREAMBLE ,Preamble" tree.end width 15. tree "MASTERGRP (Master Register Group)" group.long 0x2008++0x3 "L4 MAIN" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x3008++0x3 "L4 SP" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x4008++0x3 "L4 MP" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x5008++0x3 "L4 OSC1" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x6008++0x3 "L4 SPIM" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x7008++0x3 "STM" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x7108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x8008++0x3 "LWHPS2FPGA" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x8108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0xA008++0x3 "USB1" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0xA044++0x3 line.long 0x00 "AHB_CNTL,AHB Control Register" bitfld.long 0x00 1. " FORCE_INCR ,Force increment" "Disabled,Enabled" bitfld.long 0x00 0. " DECERR_EN ,DECERR Enable" "Disabled,Enabled" group.long 0xB008++0x3 "NANDDATA" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0xB108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x20008++0x3 "USB0" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x20044++0x3 line.long 0x00 "AHB_CNTL,AHB Control Register" bitfld.long 0x00 1. " FORCE_INCR ,Force increment" "Disabled,Enabled" bitfld.long 0x00 0. " DECERR_EN ,DECERR Enable" "Disabled,Enabled" group.long 0x21008++0x3 "NANDREGS" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x21108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x22008++0x3 "QSPIDATA" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x22044++0x3 line.long 0x00 "AHB_CNTL,AHB Control Register" bitfld.long 0x00 1. " FORCE_INCR ,Force increment" "Disabled,Enabled" bitfld.long 0x00 0. " DECERR_EN ,DECERR Enable" "Disabled,Enabled" group.long 0x23008++0x3 "FPGAMGRDATA" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x23040++0x3 line.long 0x00 "WR_TIDEMARK,Write Tidemark" bitfld.long 0x00 0.--3. " LEVEL ,Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x23108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x24008++0x3 "HPS2FPGA" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x24040++0x3 line.long 0x00 "WR_TIDEMARK,Write Tidemark" bitfld.long 0x00 0.--3. " LEVEL ,Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x25008++0x3 "ACP" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x25108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x26008++0x3 "Boot ROM" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x26108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x27008++0x3 "OCRAM" line.long 0x00 "FN_MOD_BM_ISS,Bus Matrix Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" group.long 0x27040++0x3 line.long 0x00 "WR_TIDEMARK,Write Tidemark" bitfld.long 0x00 0.--3. " LEVEL ,Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x27108++0x3 line.long 0x00 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x00 1. " WR ,Write" "Multiple,Single" bitfld.long 0x00 0. " RD ,Read" "Multiple,Single" tree.end width 13. tree "Slave Register Group (SLAVEGRP)" group.long 0x42024++0x7 "DAP" line.long 0x00 "FN_MOD2,Functionality Modification 2 Register" bitfld.long 0x00 0. " BYPASS_MERGE ,Bypass Merge" "Altered,Not altered" line.long 0x04 "FN_MOD_AHB,Functionality Modification AHB Register" bitfld.long 0x04 1. " WR_INCR_OVERRIDE ,Write Increment Override" "Default,Single" bitfld.long 0x04 0. " RD_INCR_OVERRIDE ,Read Increment Override" "Default,Single" group.long 0x42100++0xB line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x43100++0xB "MPU" line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x44028++0x3 "SDMMC" line.long 0x00 "FN_MOD_AHB,Functionality Modification AHB Register" bitfld.long 0x00 1. " WR_INCR_OVERRIDE ,Write Increment Override" "Default,Single" bitfld.long 0x00 0. " RD_INCR_OVERRIDE ,Read Increment Override" "Default,Single" group.long 0x44100++0xB line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x45100++0xB "DMA" line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x46040++0x3 "FPGA2HPS" line.long 0x00 "WR_TIDEMARK,Write Tidemark" bitfld.long 0x00 0.--3. " LEVEL ,Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x46100++0xB line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x47100++0xB "ETR" line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x48100++0xB "EMAC0" line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x49100++0xB "EMAC1" line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x4A028++0x3 "USB0" line.long 0x00 "FN_MOD_AHB,Functionality Modification AHB Register" bitfld.long 0x00 1. " WR_INCR_OVERRIDE ,Write Increment Override" "Default,Single" bitfld.long 0x00 0. " RD_INCR_OVERRIDE ,Read Increment Override" "Default,Single" group.long 0x4A100++0xB line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x4B100++0xB "NAND" line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" group.long 0x4C028++0x3 "USB1" line.long 0x00 "FN_MOD_AHB,Functionality Modification AHB Register" bitfld.long 0x00 1. " WR_INCR_OVERRIDE ,Write Increment Override" "Default,Single" bitfld.long 0x00 0. " RD_INCR_OVERRIDE ,Read Increment Override" "Default,Single" group.long 0x4C100++0xB line.long 0x00 "READ_QOS,Read Channel QoS Value" bitfld.long 0x00 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "WRITE_QOS,Write Channel QoS Value" bitfld.long 0x04 0.--3. " PRI ,Priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "FN_MOD,Issuing Functionality Modification Register" bitfld.long 0x08 1. " WR ,Write" "Multiple,Single" bitfld.long 0x08 0. " RD ,Read" "Multiple,Single" tree.end width 0xB tree.end tree.open "USB (USB OTG Controller)" tree "USB 0" base ad:0xFFB00000 width 11. tree "Global Registers" if (((d.l(ad:0xFFB00000+0x014))&0x01)==0x00) group.long 0x0000++0x07 line.long 0x00 "GOTGCTL,Control and Status Register" sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 21. " CURMOD ,Current Mode of Operation" "Device mode,Host mode" textline " " endif bitfld.long 0x00 20. " OTGVER ,OTG Version" "1.3,2.0" rbitfld.long 0x00 19. " BSESVLD ,B-Session Valid" "Not valid,Valid" textline " " rbitfld.long 0x00 16. " CONIDSTS ,Connector ID Status" "A-Device,B-Device" textline " " bitfld.long 0x00 11. " DEVHNPEN ,Device HNP Enabled" "Disabled,Enabled" bitfld.long 0x00 9. " HNPREQ ,HNP Request" "Not requested,Requested" rbitfld.long 0x00 8. " HSTNEGSCS ,Host Negotiation Success" "Failure,Success" textline " " bitfld.long 0x00 7. " BVALIDOVVAL ,B-Peripheral Session Valid Override Value" "Low,High" bitfld.long 0x00 6. " BVALIDOVEN ,B-Peripheral Session Valid Override Enable" "Disabled,Enabled" bitfld.long 0x00 5. " AVALIDOVVAL ,A-Peripheral Session Valid Override Value" "Low,High" textline " " bitfld.long 0x00 4. " AVALIDOVEN ,A-Peripheral Session Valid Override Enable" "Disabled,Enabled" bitfld.long 0x00 3. " VBVALIDOVVAL ,VBUS Valid Override Value" "Low,High" bitfld.long 0x00 2. " VBVALIDOVEN ,VBUS Valid Override Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " SESREQ ,Session Request" "Not requested,Requested" bitfld.long 0x00 0. " SESREQSCS ,Session Request Success" "Failure,Success" line.long 0x04 "GOTGINT,OTG Interrupt Register" eventfld.long 0x04 18. " ADEVTOUTCHG ,A-Device Timeout Change" "Not occurred,Occurred" eventfld.long 0x04 17. " HSTNEGDET ,Host Negotiation Detected" "Not detected,Detected" eventfld.long 0x04 9. " HSTNEGSUCSTSCHNG ,Host Negotiation Success Status Change" "Not changed,Changed" textline " " eventfld.long 0x04 8. " SESREQSUCSTSCHNG ,Session Request Success Status Change" "Not changed,Changed" eventfld.long 0x04 2. " SESENDDET ,Session End Detected" "Not detected,Detected" if (((d.l(ad:0xFFB00000+0x08))&0x200000)==0x200000) group.long 0x08++0x03 line.long 0x00 "GAHBCFG,AHB Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert Descriptor Endianess" "Not inverted,Inverted" bitfld.long 0x00 23. " AHBSINGLE ,AHB Single Support" "Disabled,Enabled" textline " " endif bitfld.long 0x00 22. " NOTIALLDMAWRIT ,Notify All DMA Write Transactions" "Last,All" textline " " bitfld.long 0x00 21. " REMMEMSUPP ,Remote Memory Support" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " NPTXFEMPLVL ,Non-Periodic TxFIFO Empty Level" "Not empty,Empty" bitfld.long 0x00 5. " DMAEN ,DMA Enable" "Slave mode,DMA mode" textline " " bitfld.long 0x00 1.--4. " HBSTLEN ,Burst Length/Type" "WORD1ORSINGLE,WORD4ORINCR,WORD8,WORD16ORINCR4,WORD32,WORD64ORINCR8,WORD128,WORD256ORINCR16,?..." bitfld.long 0x00 0. " GLBLINTRMS ,Global Interrupt Mask" "Masked,Not masked" else group.long 0x08++0x03 line.long 0x00 "GAHBCFG,AHB Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert Descriptor Endianess" "Not inverted,Inverted" bitfld.long 0x00 23. " AHBSINGLE ,AHB Single Support" "Disabled,Enabled" textline " " endif bitfld.long 0x00 21. " REMMEMSUPP ,Remote Memory Support" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " NPTXFEMPLVL ,Non-Periodic TxFIFO Empty Level" "Not empty,Empty" bitfld.long 0x00 5. " DMAEN ,DMA Enable" "Slave mode,DMA mode" textline " " bitfld.long 0x00 1.--4. " HBSTLEN ,Burst Length/Type" "WORD1ORSINGLE,WORD4ORINCR,WORD8,WORD16ORINCR4,WORD32,WORD64ORINCR8,WORD128,WORD256ORINCR16,?..." bitfld.long 0x00 0. " GLBLINTRMS ,Global Interrupt Mask" "Masked,Not masked" endif group.long 0x0C++0x07 line.long 0x00 "GUSBCFG,USB Configuration Register" bitfld.long 0x00 31. " CORRUPTTXPKT ,Corrupt Tx packet" "Normal,Debug" bitfld.long 0x00 30. " FORCEDEVMODE ,Force Device Mode" "Normal,Force device" bitfld.long 0x00 29. " FORCEHSTMODE ,Force Host Mode" "Normal,Force host" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 28. " TXENDDELAY ,Tx End Delay" "Disabled,Enabled" rbitfld.long 0x00 26. " IC_USBCAP ,IC_USB-Capable" "Not capable,Capable" textline " " else bitfld.long 0x00 28. " TXENDDELAY ,Tx End Delay" "Disabled,?..." textline " " endif bitfld.long 0x00 22. " TERMSELDLPULSE ,TermSel DLine Pulsing Selection" "TXVALID,TERMSEL" textline " " bitfld.long 0x00 19. " ULPICLKSUSM ,ULPI Clock SuspendM" "Enabled,Disabled" bitfld.long 0x00 18. " ULPIAUTORES ,ULPI Auto Resume" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 10.--13. " USBTRDTIM ,USB Turnaround Time" ",,,,,16-bit UTMI+,,,,8-bit UTMI+,?..." textline " " else bitfld.long 0x00 10.--13. " USBTRDTIM ,USB Turnaround Time" ",,,,,,,,,8-bit UTMI+,?..." textline " " endif bitfld.long 0x00 9. " HNPCAP ,HNP-Capable" "Not capable,Capable" bitfld.long 0x00 8. " SRPCAP ,SRP-Capable" "Not capable,Capable" bitfld.long 0x00 7. " DDRSEL ,ULPI DDR Select" "SDR,DDR" textline " " rbitfld.long 0x00 6. " PHYSEL ,USB 2.0 High-Speed PHY" "USB 2.0 high-speed,?..." rbitfld.long 0x00 5. " FSINTF ,Full-Speed Serial Interface Select" "6-pin,3-pin" rbitfld.long 0x00 4. " ULPI_UTMI_SEL ,ULPI Select" "ULPI PHY,?..." textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 3. " PHYIF ,PHY Interface" "PHY 8bit Mode,PHY 16bit Mode" textline " " else rbitfld.long 0x00 3. " PHYIF ,PHY Interface" "PHY 8bit Mode,?..." textline " " endif bitfld.long 0x00 0.--2. " TOUTCAL ,FS Timeout Calibration" "0,1,2,3,4,5,6,7" line.long 0x04 "GRSTCTL,Reset Register" rbitfld.long 0x04 31. " AHBIDLE ,AHB Master Idle" "Not occurred,Occurred" rbitfld.long 0x04 30. " DMAREQ ,DMA Request Signal" "No request,Request" bitfld.long 0x04 6.--10. " TXFNUM ,TxFIFO Number" "Tx FIFO 0,Tx FIFO 1,Tx FIFO 2,Tx FIFO 3,Tx FIFO 4,Tx FIFO 5,Tx FIFO 6,Tx FIFO 7,Tx FIFO 8,Tx FIFO 9,Tx FIFO 10,Tx FIFO 11,Tx FIFO 12,Tx FIFO 13,Tx FIFO 14,Tx FIFO 15,All,?..." textline " " bitfld.long 0x04 5. " TXFFLSH ,TxFIFO Flush" "No effect,Flush" bitfld.long 0x04 4. " RXFFLSH ,RxFIFO Flush" "No effect,Flush" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x04 1. " PIUFSSFTRST ,PIU FS Dedicated Controller Soft Reset" "No effect,Reset" textline " " endif bitfld.long 0x04 0. " CSFTRST ,Core Soft Reset" "No effect,Reset" else group.long 0x0000++0x07 line.long 0x00 "GOTGCTL,Control and Status Register" sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 21. " CURMOD ,Current Mode of Operation" "Device mode,Host mode" textline " " endif bitfld.long 0x00 20. " OTGVER ,OTG Version" "1.3,2.0" rbitfld.long 0x00 18. " ASESVLD ,A-Session Valid" "Not valid,Valid" rbitfld.long 0x00 17. " DBNCTIME ,Long/Short Debounce Time" "Long,Short" textline " " rbitfld.long 0x00 16. " CONIDSTS ,Connector ID Status" "A-Device,B-Device" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 14. " EHEN ,Embedded Host Enable" "Disabled,Enabled" textline " " endif bitfld.long 0x00 10. " HSTSETHNPEN ,Host Set HNP Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " BVALIDOVVAL ,B-Peripheral Session Valid Override Value" "Low,High" bitfld.long 0x00 6. " BVALIDOVEN ,B-Peripheral Session Valid Override Enable" "Disabled,Enabled" bitfld.long 0x00 5. " AVALIDOVVA ,A-Peripheral Session Valid Override Value" "Low,High" textline " " bitfld.long 0x00 4. " AVALIDOVEN ,A-Peripheral Session Valid Override Enable" "Disabled,Enabled" bitfld.long 0x00 3. " VBVALIDOVVAL ,VBUS Valid Override Value" "Low,High" bitfld.long 0x00 2. " VBVALIDOVEN ,VBUS Valid Override Enable" "Disabled,Enabled" line.long 0x04 "GOTGINT,OTG Interrupt Register" eventfld.long 0x04 19. " DBNCEDONE ,Debounce Done" "Not occurred,Occurred" textline " " eventfld.long 0x04 18. " ADEVTOUTCHG ,A-Device Timeout Change" "Not occurred,Occurred" eventfld.long 0x04 17. " HSTNEGDET ,Host Negotiation Detected" "Not detected,Detected" eventfld.long 0x04 9. " HSTNEGSUCSTSCHNG ,Host Negotiation Success Status Change" "Not changed,Changed" textline " " eventfld.long 0x04 8. " SESREQSUCSTSCHNG ,Session Request Success Status Change" "Not changed,Changed" eventfld.long 0x04 2. " SESENDDET ,Session End Detected" "Not detected,Detected" if (((d.l(ad:0xFFB00000+0x08))&0x200000)==0x200000) group.long 0x08++0x03 line.long 0x00 "GAHBCFG,AHB Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert Descriptor Endianess" "Not inverted,Inverted" bitfld.long 0x00 23. " AHBSINGLE ,AHB Single Support" "Disabled,Enabled" textline " " endif bitfld.long 0x00 22. " NOTIALLDMAWRIT ,Notify All DMA Write Transactions" "Last,All" textline " " bitfld.long 0x00 21. " REMMEMSUPP ,Remote Memory Support" "Disabled,Enabled" bitfld.long 0x00 8. " PTXFEMPLVL ,Periodic TxFIFO Empty Level" "Half,Completely" textline " " bitfld.long 0x00 7. " NPTXFEMPLVL ,Non-Periodic TxFIFO Empty Level" "Half,Completely" bitfld.long 0x00 5. " DMAEN ,DMA Enable" "Slave mode,DMA mode" textline " " bitfld.long 0x00 1.--4. " HBSTLEN ,Burst Length/Type" "WORD1ORSINGLE,WORD4ORINCR,WORD8,WORD16ORINCR4,WORD32,WORD64ORINCR8,WORD128,WORD256ORINCR16,?..." bitfld.long 0x00 0. " GLBLINTRMS ,Global Interrupt Mask" "Masked,Not masked" else group.long 0x08++0x03 line.long 0x00 "GAHBCFG,AHB Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert Descriptor Endianess" "Not inverted,Inverted" bitfld.long 0x00 23. " AHBSINGLE ,AHB Single Support" "Disabled,Enabled" textline " " endif bitfld.long 0x00 21. " REMMEMSUPP ,Remote Memory Support" "Disabled,Enabled" bitfld.long 0x00 8. " PTXFEMPLVL ,Periodic TxFIFO Empty Level" "Half,Completely" textline " " bitfld.long 0x00 7. " NPTXFEMPLVL ,Non-Periodic TxFIFO Empty Level" "Half,Completely" bitfld.long 0x00 5. " DMAEN ,DMA Enable" "Slave mode,DMA mode" textline " " bitfld.long 0x00 1.--4. " HBSTLEN ,Burst Length/Type" "WORD1ORSINGLE,WORD4ORINCR,WORD8,WORD16ORINCR4,WORD32,WORD64ORINCR8,WORD128,WORD256ORINCR16,?..." bitfld.long 0x00 0. " GLBLINTRMS ,Global Interrupt Mask" "Masked,Not masked" endif group.long 0x0C++0x07 line.long 0x00 "GUSBCFG,USB Configuration Register" bitfld.long 0x00 31. " CORRUPTTXPKT ,Corrupt Tx packet" "Normal,Debug" bitfld.long 0x00 30. " FORCEDEVMODE ,Force Device Mode" "Normal,Force device" bitfld.long 0x00 29. " FORCEHSTMODE ,Force Host Mode" "Normal,Force host" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 26. " IC_USBCAP ,IC_USB-Capable" "Not capable,Capable" textline " " endif bitfld.long 0x00 25. " ULPI ,ULPI Interface Protect Disable" "No,Yes" bitfld.long 0x00 24. " INDICATOR ,Indicator Pass Through" "Qualified,Not qualified" bitfld.long 0x00 23. " COMPLEMENT ,Indicator Complement" "Not inverted,Inverted" textline " " bitfld.long 0x00 21. " ULPIEXTVBUSINDICATOR ,ULPI External VBUS Indicator" "Internal,External" bitfld.long 0x00 20. " ULPIEXTVBUSDRV ,ULPI External VBUS Drive" "Internal,External" textline " " bitfld.long 0x00 19. " ULPICLKSUSM ,ULPI Clock Suspend" "Enabled,Disabled" bitfld.long 0x00 18. " ULPIAUTORES ,ULPI Auto Resume" "Disabled,Enabled" textline " " bitfld.long 0x00 9. " HNPCAP ,HNP-Capable" "Not capable,Capable" bitfld.long 0x00 8. " SRPCAP ,SRP-Capable" "Not capable,Capable" bitfld.long 0x00 7. " DDRSEL ,ULPI DDR Select" "SDR,DDR" textline " " rbitfld.long 0x00 6. " PHYSEL ,USB 2.0 High-Speed PHY" "USB 2.0 high-speed,?..." rbitfld.long 0x00 5. " FSINTF ,Full-Speed Serial Interface Select" "6-pin,3-pin" rbitfld.long 0x00 4. " ULPI_UTMI_SEL ,ULPI Select" "ULPI PHY,?..." textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 3. " PHYIF ,PHY Interface" "PHY 8bit Mode,PHY 16bit Mode" textline " " else rbitfld.long 0x00 3. " PHYIF ,PHY Interface" "PHY 8bit Mode,?..." textline " " endif bitfld.long 0x00 0.--2. " TOUTCAL ,FS Timeout Calibration" "0,1,2,3,4,5,6,7" line.long 0x04 "GRSTCTL,Reset Register" rbitfld.long 0x04 31. " AHBIDLE ,AHB Master Idle" "Not occurred,Occurred" rbitfld.long 0x04 30. " DMAREQ ,DMA Request Signal" "No request,Request" bitfld.long 0x04 6.--10. " TXFNUM ,TxFIFO Number" "Tx FIFO 0,Tx FIFO 1,Tx FIFO 2,Tx FIFO 3,Tx FIFO 4,Tx FIFO 5,Tx FIFO 6,Tx FIFO 7,Tx FIFO 8,Tx FIFO 9,Tx FIFO 10,Tx FIFO 11,Tx FIFO 12,Tx FIFO 13,Tx FIFO 14,Tx FIFO 15,All,?..." textline " " bitfld.long 0x04 5. " TXFFLSH ,TxFIFO Flush" "No effect,Flush" bitfld.long 0x04 4. " RXFFLSH ,RxFIFO Flush" "No effect,Flush" bitfld.long 0x04 2. " FRMCNTRRST ,Host Frame Counter Reset" "No effect,Reset" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x04 1. " PIUFSSFTRST ,PIU FS Dedicated Controller Soft Reset" "No effect,Reset" textline " " endif bitfld.long 0x04 0. " CSFTRST ,Core Soft Reset" "No effect,Reset" endif if (((d.l(ad:0xFFB00000+0x014))&0x01)==0x00) group.long 0x014++0x07 line.long 0x00 "GINTSTS,Interrupt Register" eventfld.long 0x00 31. " WKUPINT ,Resume/Remote Wakeup Detected Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 30. " SESSREQINT ,Session Request/New Session Detected Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 28. " CONLDSTSCHNG ,Connector ID Status Change Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 23. " RESETDET ,Reset detected Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 22. " FETSUSP ,Data Fetch Suspended Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 21. " INCOMPLSOOUT ,Incomplete Isochronous OUT Transfer Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 20. " INCOMPISOIN ,Incomplete Isochronous IN Transfer Interrupt" "No intrrupt,Interrupt" rbitfld.long 0x00 19. " OEPINT ,OUT Endpoints Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 18. " IEPINT ,IN Endpoints Interrupt" "No interrupt,Interrupt" textline " " rbitfld.long 0x00 17. " EPMIS ,Endpoint Mismatch Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" eventfld.long 0x00 15. " EOPF ,End of Periodic Frame Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 14. " ISOOUTDROP ,Isochronous OUT Packet Dropped Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 13. " ENUMDONE ,Enumeration Done Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 12. " USBRST ,USB Reset" "No interrupt,Interrupt" textline " " eventfld.long 0x00 11. " USBSUSP ,USB Suspend Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 10. " ERLYSUSP ,Early Suspend Interrupt" "No interrupt,Interrupt" textline " " rbitfld.long 0x00 7. " GOUTNAKEFF , Global OUT NAK Effective Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 6. " GINNAKEFF ,Global IN Non-Periodic NAK Effective Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 5. " NPTXFEMP ,Non-periodic TxFIFO Empty Interrupt" "No interrupt,Interrupt" textline " " endif rbitfld.long 0x00 4. " RXFLVL ,RxFIFO Non-Empty Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " SOF ,Start of Frame Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 2. " OTGINT ,OTG Interrupt Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 1. " MODEMIS ,Mode Mismatch Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 0. " CURMOD ,Current Mode of Operation Interrupt" "Device mode,Host mode" line.long 0x04 "GINTMSK,Interrupt Mask Register" bitfld.long 0x04 31. " WKUPINTMSK ,Resume/Remote Wakeup Detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 30. " SESSREQINTMSK ,Session Request/New Session Detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 29. " DISCONNINTMSK ,Disconnect Detected Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 28. " CONLDSTSCHNGMSK ,Connector ID Status Change Mask" "Masked,Not masked" textline " " bitfld.long 0x04 23. " RESETDETMSK ,Reset detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 22. " FETSUSPMSK ,Data Fetch Suspended Mask" "Masked,Not masked" textline " " bitfld.long 0x04 20. " INCOMPLSOINMSK ,Incomplete Isochronous IN Transfer Mask" "Masked,Not masked" bitfld.long 0x04 19. " OEPINTMSK ,OUT Endpoints Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 18. " IEPINTMSK ,IN Endpoints Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 17. " EPMISMSK ,Endpoint Mismatch Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 15. " EOPFMSK ,End of Periodic Frame Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 14. " ISOOUTDROPMSK ,Isochronous OUT Packet Dropped Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 13. " ENUMDONEMS ,Enumeration Done Mask" "Masked,Not masked" bitfld.long 0x04 12. " USBRSTMSK ,USB Reset Mask" "Masked,Not masked" textline " " bitfld.long 0x04 11. " USBSUSPMK , USB Suspend Mask" "Masked,Not masked" bitfld.long 0x04 10. " ERLYSUSPMSK ,Early Suspend Mask" "Masked,Not masked" textline " " bitfld.long 0x04 7. " GOUTNAKEFFMSK ,Global OUT NAK Effective Mask" "Masked,Not masked" bitfld.long 0x04 6. " GINNAKEFFMSK ,Global Non-periodic IN NAK Effective Mask" "Masked,Not masked" textline " " bitfld.long 0x04 4. " RXFLVLMSK ,Receive FIFO Non-Empty Mask" "Masked,Not masked" bitfld.long 0x04 3. " SOFMSK ,Start of Frame Mask" "Masked,Not masked" bitfld.long 0x04 2. " OTGINTMSK ,OTG Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " MODEMISMSK ,Mode Mismatch Interrupt Mask" "Masked,Not masked" else group.long 0x014++0x07 line.long 0x00 "GINTSTS,Interrupt Register" eventfld.long 0x00 31. " WKUPINT ,Resume/Remote Wakeup Detected Interrupt" "Not activated,Activated" eventfld.long 0x00 30. " SESSREQINT ,Session Request/New Session Detected Interrupt" "Not activated,Activated" eventfld.long 0x00 29. " DISCONNINT ,Disconnect Detected Interrupt" "Not detected,Detected" textline " " eventfld.long 0x00 28. " CONLDSTSCHNG ,Connector ID Status Change Interrupt" "Not occurred,Occurred" rbitfld.long 0x00 26. " PTXFEMP ,Periodic TxFIFO Empty Interrupt" "No interrupt,Interrupt" textline " " rbitfld.long 0x00 25. " HCHINT ,Host Channels Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 24. " PRTINT ,Host Port Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 21. " INCOMPLP ,Incomplete Isochronous OUT Transfer Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 5. " NPTXFEMP ,Non-periodic TxFIFO Empty Interrupt" "No interrupt,Interrupt" textline " " endif rbitfld.long 0x00 4. " RXFLVL ,RxFIFO Non-Empty Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " SOF ,Start of Frame Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 2. " OTGINT ,OTG Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 1. " MODEMIS ,Mode Mismatch Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 0. " CURMOD ,Current Mode of Operation" "Device mode,Host mode" line.long 0x04 "GINTMSK,Interrupt Mask Register" bitfld.long 0x04 31. " WKUPINTMSK ,Resume/Remote Wakeup Detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 30. " SESSREQINTMSK ,Session Request/New Session Detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 29. " DISCONNINTMSK ,Disconnect Detected Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 28. " CONLDSTSCHNGMSK ,Connector ID Status Change Mask" "Masked,Not masked" bitfld.long 0x04 26. " PTXFEMPMSK ,Periodic TxFIFO Empty Mask" "Masked,Not masked" textline " " bitfld.long 0x04 25. " HCHINTMSK ,Host Channels Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 24. " PRTINTMSK ,Host Port Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 21. " INCOMPIPMSK ,Incomplete Periodic Transfer Mask" "Masked,Not masked" textline " " bitfld.long 0x04 4. " RXFLVLMSK ,Receive FIFO Non-Empty Mask" "Masked,Not masked" bitfld.long 0x04 3. " SOFMSK ,Start of Frame Mask" "Masked,Not masked" bitfld.long 0x04 2. " OTGINTMSK ,OTG Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " MODEMISMSK ,Mode Mismatch Interrupt Mask" "Masked,Not masked" endif if (((d.l(ad:0xFFB00000+0x014))&0x01)==0x00) rgroup.long 0x001C++0x07 line.long 0x00 "GRXSTSR,Receive Status Debug Read Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21.--24. " FN ,Frame Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 17.--20. " PKTSTS ,Packet Status" ",Global OUT NAK,OUT received,OUT transfer completed,SETUP transaction completed,,SETUP received,?..." textline " " endif bitfld.long 0x00 15.--16. " DPID ,Data PID" "DATA0,DATA1,DATA2,MDATA" hexmask.long.word 0x00 4.--14. 1. " BCNT ,Byte Count" bitfld.long 0x00 0.--3. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "GRXSTSP,Status Read and Pop Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x04 21.--24. " FN ,Frame Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x04 17.--20. " PKTSTS ,Packet Status" ",Global OUT NAK,OUT received,OUT transfer completed,SETUP transaction completed,,SETUP received,?..." textline " " endif bitfld.long 0x04 15.--16. " DPID ,Data PID" "DATA0,DATA1,DATA2,MDATA" hexmask.long.word 0x04 4.--14. 1. " BCNT ,Byte Count" bitfld.long 0x04 0.--3. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" else rgroup.long 0x001C++0x07 line.long 0x00 "GRXSTSR,Receive Status Debug Read Register" bitfld.long 0x00 17.--20. " PKTSTS ,Packet Status" ",,IN received,IN transfer completed,,Data toggle error,,Channel halted,?..." textline " " bitfld.long 0x00 15.--16. " DPID ,Data PID" "DATA0,DATA1,DATA2,MDATA" hexmask.long.word 0x00 4.--14. 1. " BCNT ,Byte Count" bitfld.long 0x00 0.--3. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "GRXSTSP,Status Read and Pop Register" bitfld.long 0x04 17.--20. " PKTSTS ,Packet Status" ",,IN received,IN transfer completed,,Data toggle error,,Channel halted,?..." textline " " bitfld.long 0x04 15.--16. " DPID ,Data PID" "DATA0,DATA1,DATA2,MDATA" hexmask.long.word 0x04 4.--14. 1. " BCNT ,Byte Count" bitfld.long 0x04 0.--3. " CHNUM ,Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" endif group.long 0x0024++0x03 line.long 0x00 "GRXFSIZ,Receive FIFO Size Register" hexmask.long.word 0x00 0.--13. 1. " RXFDEP ,RxFIFO Depth" if (((d.l(ad:0xFFB00000+0x014))&0x01)==0x01) group.long 0x0028++0x03 line.long 0x00 "GNPTXFSIZ,Non-Periodic Transmit FIFO Size Register" sif cpu()=="ARRIA10SOC" hexmask.long.word 0x00 16.--31. 1. " NPTXFDEP ,Non-periodic TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " NPTXFSTADDR ,Non-periodic Transmit RAM Start Address" else hexmask.long.word 0x00 16.--29. 1. " NPTXFDEP ,Non-periodic TxFIFO Depth" hexmask.long.word 0x00 0.--13. 1. " NPTXFSTADDR ,Non-periodic Transmit RAM Start Address" endif endif rgroup.long 0x002C++0x03 line.long 0x00 "GNPTXSTS,Non-Periodic Transmit FIFO/Queue Status Register" bitfld.long 0x00 27.--30. " NPTXQTOP[6:3] ,Top of the Non-periodic Transmit Request Queue - Channel/Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 25.--26. " [2:1] ,Top of the Non-periodic Transmit Request Queue - Entry Type" "IN/OUT token,0-length tx packet,PING/CSPLIT token,Channel halt cmd" bitfld.long 0x00 24. " [0] ,Top of the Non-periodic Transmit Request Queue - Terminate" "No,Yes" textline " " hexmask.long.byte 0x00 16.--23. 1. " NPTXQSPCAVAIL ,Non-periodic Transmit Request Queue Space Available" hexmask.long.word 0x00 0.--15. 1. " NPTXFSPCAVAIL ,Non-periodic TxFIFO Space Avail" group.long 0x34++0x07 line.long 0x00 "GPVNDCTL,PHY Vendor Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " DISULPIDRVR ,Disable ULPI Drivers" "No,Yes" bitfld.long 0x00 27. " VSTSDONE ,VStatus Done" "Not activated,Activated" textline " " rbitfld.long 0x00 26. " VSTSBSY ,VStatus Busy" "Not busy,Busy" bitfld.long 0x00 25. " NEWREGREQ ,New Register Request" "Not requested,Requested" textline " " else rbitfld.long 0x00 31. " DISULPIDRVR ,Disable ULPI Drivers" "No,Yes" rbitfld.long 0x00 27. " VSTSDONE ,VStatus Done" "Not activated,Activated" textline " " rbitfld.long 0x00 26. " VSTSBSY ,VStatus Busy" "Not busy,Busy" rbitfld.long 0x00 25. " NEWREGREQ ,New Register Request" "Not requested,Requested" textline " " endif bitfld.long 0x00 22. " REGWR ,Register Write" "Read,Write" hexmask.long.byte 0x00 16.--21. 1. " REGADDR ,Register Address" textline " " hexmask.long.byte 0x00 8.--15. 1. " VCTRL ,UTMI+ Vendor Control Register Address" hexmask.long.byte 0x00 0.--7. 1. " REGDATA ,Register Data" line.long 0x04 "GGPIO,General Purpose Input Output Register" hexmask.long.word 0x04 16.--31. 1. " GPO ,General Purpose Output" hexmask.long.word 0x04 0.--15. 1. " GPI ,General Purpose Input" rgroup.long 0x3C++0x03 line.long 0x00 "GUID,User ID Register" rgroup.long 0x40++0x13 line.long 0x00 "GSNPSID,Synopsys ID Register" line.long 0x04 "GHWCFG1,User HW Config1 Register" bitfld.long 0x04 30.--31. " GHWCFG1[31:30] ,Endpoint 15 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 28.--29. " [29:28] ,Endpoint 14 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 26.--27. " [27:26] ,Endpoint 13 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 24.--25. " [25:24] ,Endpoint 12 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 22.--23. " [23:22] ,Endpoint 11 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 20.--21. " [21:20] ,Endpoint 10 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 18.--19. " [19:18] ,Endpoint 9 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 16.--17. " [17:16] ,Endpoint 8 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 14.--15. " [15:14] ,Endpoint 7 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 12.--13. " [13:12] ,Endpoint 6 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 10.--11. " [11:10] ,Endpoint 5 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 8.--9. " [9:8] ,Endpoint 4 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 6.--7. " [7:6] ,Endpoint 3 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 4.--5. " [5:4] ,Endpoint 2 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 2.--3. " [3:2] ,Endpoint 1 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 0.--1. " [1:0] ,Endpoint 0 Direction" "BIDIR,IN,OUT,?..." line.long 0x08 "GHWCFG2,User HW Config2 Register" bitfld.long 0x08 26.--30. " TKNQDEPTH ,Device Mode IN Token Sequence Learning Queue Depth" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,?..." bitfld.long 0x08 24.--25. " PTXQDEPTH ,Host Mode Periodic Request Queue Depth" "2,4,8,16" bitfld.long 0x08 22.--23. " NPTXQDEPTH ,Non Periodic Request Queue Depth" "2,4,8,?..." textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x08 20. " MULTIPROCINTRPT ,Multi Processor Interrupt Enabled" "Disabled,Enabled" textline " " endif bitfld.long 0x08 19. " DYNFIFOSIZING ,Dynamic FIFO Sizing Enabled" ",Enabled" bitfld.long 0x08 18. " PERIOSUPPORT ,Periodic OUT Channels Supported in Host Mode" ",Enabled" textline " " bitfld.long 0x08 14.--17. " NUMHSTCHNL ,Number of Host Channels" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 10.--13. " NUMDEVEPS ,Number of Device Endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x08 8.--9. " FSPHYTYPE ,Full Speed PHY Interface Type" "Not supported,Dedicated,UTMI+,ULPI" bitfld.long 0x08 6.--7. " HSPHYTYPE ,High Speed PHY Interface Type" "Not supported,UTMI+,ULPI,UTMI+ and ULPI" textline " " else bitfld.long 0x08 8.--9. " FSPHYTYPE ,Full Speed PHY Interface Type" ",,ULPI Type,?..." bitfld.long 0x08 6.--7. " HSPHYTYPE ,High Speed PHY Interface Type" "No HS,,ULPI,?..." textline " " endif bitfld.long 0x08 5. " SINGPNT ,Point-to-Point" "Multi-point,Single-point" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x08 3.--4. " OTGARCH ,Architecture" "Slave-only,External DMA,Internal DMA,?..." textline " " else bitfld.long 0x08 3.--4. " OTGARCH ,Architecture" ",,DMA,?..." textline " " endif bitfld.long 0x08 0.--2. " OTGMODE ,Mode of Operation" "HNP & SRP OTG,SRP OTG,Non-HNP & Non-SRP OTG,SRP Device,NON-OTG Device,SRP Host,NON-OTG Host,?..." line.long 0x0C "GHWCFG3,User HW Config3 Register" hexmask.long.word 0x0C 16.--31. 1. " DFIFODEPTH ,DFIFO Depth" bitfld.long 0x0C 15. " LPMMODE ,OTG ENABLE LPM" "Disabled,?..." bitfld.long 0x0C 14. " BCSUPPORT ,OTG BC SUPPORT" "Disabled,?..." textline " " bitfld.long 0x0C 13. " HSICMODE ,OTG ENABLE HSIC" "Disabled,?..." bitfld.long 0x0C 12. " ADPSUPPORT ,OTG ADP Support" ",Enabled" bitfld.long 0x0C 11. " RSTTYPE ,Reset Style for Clocked always Blocks in RTL" "Enabled,?..." textline " " bitfld.long 0x0C 10. " OPTFEATURE ,Optional Features Removed" "Disabled,?..." bitfld.long 0x0C 9. " VNDCTLSUPT ,Vendor Control Interface Support" ",Enabled" bitfld.long 0x0C 8. " I2CINTSEL ,I2C Selection" "Disabled,?..." textline " " bitfld.long 0x0C 7. " OTGEN ,OTG Function" "Disabled,Enabled" bitfld.long 0x0C 4.--6. " PKTSIZEWIDTH ,Width of Packet Size Counters" "4,5,6,7,8,9,10,?..." bitfld.long 0x0C 0.--3. " XFERSIZEWIDTH ,Width of Transfer Size Counters" "11,12,13,14,15,16,17,18,19,?..." line.long 0x10 "GHWCFG4,User HW Config4 Register" bitfld.long 0x10 31. " DMA ,Scatter Gather DMA" "Disabled,Enabled" bitfld.long 0x10 30. " DMA_CONFIGURATION ,Scatter Gather DMA configuration" "Non-scater,Scater" bitfld.long 0x10 26.--29. " INEPS ,Number of Device Mode IN Endpoints Including Control" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x10 25. " DEDFIFOMODE ,Enable Dedicated Transmit FIFO for device IN Endpoints" "Disabled,Enabled" bitfld.long 0x10 24. " SESSENDFLTR ,Session End Filter" "Disabled,Enabled" bitfld.long 0x10 23. " BVALIDFLTR ,b_valid Filter" "Disabled,Enabled" textline " " bitfld.long 0x10 22. " AVALIDFLTR ,a_valid Filter" "Disabled,Enabled" bitfld.long 0x10 21. " VBUSVALIDFLTR ,Vbus Valid Filter" "Disabled,Enabled" bitfld.long 0x10 20. " IDDGFLTR ,Iddig Filter" "Disabled,Enabled" textline " " bitfld.long 0x10 16.--19. " NUMCTLEPS ,Number of Device Mode Control Endpoints in Addition to Endpoint 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x10 14.--15. " PHYDATAWIDTH ,UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width" "8-bit,16-bit,8-bit/16-bit,?..." textline " " bitfld.long 0x10 7. " EXTENDEDHIBERNATION ,Extended Hibernation" "Disabled,Enabled" textline " " else bitfld.long 0x10 14.--15. " PHYDATAWIDTH ,UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width" "8-bit,?..." textline " " endif bitfld.long 0x10 6. " HIBERNATION ,Enable Hibernation" "Disabled,Enabled" bitfld.long 0x10 5. " AHBFREQ ,Minimum AHB Frequency Less Than 60 MHz" "Disabled,Enabled" bitfld.long 0x10 4. " PARTIALPWRDN ,Enable Partial Power Down" "Disabled,Enabled" textline " " bitfld.long 0x10 0.--3. " NUMDEVPERIOEPS ,Number of Device Mode Periodic IN Endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x005C++0x03 line.long 0x00 "GDFIFOCFG,DFIFO Software Config Register" hexmask.long.word 0x00 16.--31. 1. " EPINFOBASEADDR ,End Point Info Basr Addr" hexmask.long.word 0x00 0.--15. 1. " GDFIFOCFG ,DFIFO Software Config" group.long 0x0100++0x03 line.long 0x00 "HPTXFSIZ,Host Periodic Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " PTXFSIZE ,Host Periodic TxFIFO Depth" hexmask.long.word 0x00 0.--14. 1. " PTXFSTADDR ,Host Periodic TxFIFO Start Address" group.long 0x104++0x03 line.long 0x00 "DIEPTXF1 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP1 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--14. 1. " INEP1 TXFSTADDR ,IN Endpoint FIFO1 Transmit RAM Start Address" group.long 0x108++0x03 line.long 0x00 "DIEPTXF2 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP2 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--14. 1. " INEP2 TXFSTADDR ,IN Endpoint FIFO2 Transmit RAM Start Address" group.long 0x10C++0x03 line.long 0x00 "DIEPTXF3 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP3 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP3 TXFSTADDR ,IN Endpoint FIFO3 Transmit RAM Start Address" group.long 0x110++0x03 line.long 0x00 "DIEPTXF4 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP4 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP4 TXFSTADDR ,IN Endpoint FIFO4 Transmit RAM Start Address" group.long 0x114++0x03 line.long 0x00 "DIEPTXF5 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP5 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP5 TXFSTADDR ,IN Endpoint FIFO5 Transmit RAM Start Address" group.long 0x118++0x03 line.long 0x00 "DIEPTXF6 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP6 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP6 TXFSTADDR ,IN Endpoint FIFO6 Transmit RAM Start Address" group.long 0x11C++0x03 line.long 0x00 "DIEPTXF7 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP7 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP7 TXFSTADDR ,IN Endpoint FIFO7 Transmit RAM Start Address" group.long 0x120++0x03 line.long 0x00 "DIEPTXF8 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP8 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP8 TXFSTADDR ,IN Endpoint FIFO8 Transmit RAM Start Address" group.long 0x124++0x03 line.long 0x00 "DIEPTXF9 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP9 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP9 TXFSTADDR ,IN Endpoint FIFO9 Transmit RAM Start Address" group.long 0x128++0x03 line.long 0x00 "DIEPTXF10,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP10TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP10TXFSTADDR ,IN Endpoint FIFO10 Transmit RAM Start Address" group.long 0x12C++0x03 line.long 0x00 "DIEPTXF11,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP11TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP11TXFSTADDR ,IN Endpoint FIFO11 Transmit RAM Start Address" group.long 0x130++0x03 line.long 0x00 "DIEPTXF12,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP12TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP12TXFSTADDR ,IN Endpoint FIFO12 Transmit RAM Start Address" group.long 0x134++0x03 line.long 0x00 "DIEPTXF13,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP13TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP13TXFSTADDR ,IN Endpoint FIFO13 Transmit RAM Start Address" group.long 0x138++0x03 line.long 0x00 "DIEPTXF14,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP14TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP14TXFSTADDR ,IN Endpoint FIFO14 Transmit RAM Start Address" group.long 0x13C++0x03 line.long 0x00 "DIEPTXF15,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP15TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP15TXFSTADDR ,IN Endpoint FIFO15 Transmit RAM Start Address" tree.end width 12. tree "Host mode registers" if ((((d.l(ad:0xFFB00000+0x014))&0x01)==0x01)&&(((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x0400++0x03 line.long 0x00 "HCFG,Host Configuration Register" bitfld.long 0x00 31. " MODECHTIMEN ,Mode Change Ready Timer Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 26. " PERSCHEDENA ,Enable Periodic Scheduling" "Disabled,Enabled" bitfld.long 0x00 24.--25. " FRLISTEN ,Frame List Entries" ",8,16,32" bitfld.long 0x00 23. " DESCDMA ,Enable Scatter/gather DMA in Host mode" "Disabled,Enabled" textline " " hexmask.long.byte 0x00 8.--15. 1. " RESVALID ,Resume Validation Period" bitfld.long 0x00 7. " ENA32KHZS ,Enable 32 KHz Suspend mode" "Disabled,Enabled" bitfld.long 0x00 2. " FSLSSUPP ,FS-Only Support" "HS/FS/LS,FS/LS" textline " " bitfld.long 0x00 0.--1. " FSLSPCLKSEL ,FS PHY Clock Select" "30/60 MHz,48MHz,6 MHz,?..." elif ((((d.l(ad:0xFFB00000+0x014))&0x01)==0x01)&&(((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)) group.long 0x0400++0x03 line.long 0x00 "HCFG,Host Configuration Register" bitfld.long 0x00 31. " MODECHTIMEN ,Mode Change Ready Timer Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 23. " DESCDMA ,Enable Scatter/gather DMA in Host mode" "Disabled,Enabled" textline " " hexmask.long.byte 0x00 8.--15. 1. " RESVALID ,Resume Validation Period" bitfld.long 0x00 7. " ENA32KHZS ,Enable 32 KHz Suspend mode" "Disabled,Enabled" bitfld.long 0x00 2. " FSLSSUPP ,FS-Only Support" "HS/FS/LS,FS/LS" textline " " bitfld.long 0x00 0.--1. " FSLSPCLKSEL ,FS PHY Clock Select" "30/60 MHz,48MHz,6 MHz,?..." elif (((d.l(ad:0xFFB00000+0x014))&0x01)==0x01) group.long 0x0400++0x03 line.long 0x00 "HCFG,Host Configuration Register" bitfld.long 0x00 31. " MODECHTIMEN ,Mode Change Ready Timer Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 23. " DESCDMA ,Enable Scatter/gather DMA in Host mode" "Disabled,?..." textline " " hexmask.long.byte 0x00 8.--15. 1. " RESVALID ,Resume Validation Period" bitfld.long 0x00 7. " ENA32KHZS ,Enable 32 KHz Suspend mode" "Disabled,Enabled" bitfld.long 0x00 2. " FSLSSUPP ,FS-Only Support" "HS/FS/LS,FS/LS" textline " " bitfld.long 0x00 0.--1. " FSLSPCLKSEL ,FS PHY Clock Select" "30/60 MHz,48MHz,6 MHz,?..." endif if (((d.l(ad:0xFFB00000+0x014))&0x01)==0x01) group.long 0x0404++0x03 line.long 0x00 "HFIR,Host Frame Interval Register" bitfld.long 0x00 16. " HFIRRLDCTRL ,Reload Control" "Disabled,Enabled" hexmask.long.word 0x00 0.--15. 1. " FRINT ,Frame Interval" rgroup.long 0x0408++0x03 line.long 0x00 "HFNUM,Host Frame Number/Frame Time Remaining Register" hexmask.long.word 0x00 16.--31. 1. " FRREM ,Frame Time Remaining" hexmask.long.word 0x00 0.--15. 1. " FRNUM ,Frame Number" rgroup.long 0x0410++0x07 line.long 0x00 "HPTXSTS,Host Periodic Transmit FIFO/Queue Status Register" bitfld.long 0x00 31. " ODDEVNMFRAME ,Odd Even Micro Frame" "Odd,Even" bitfld.long 0x00 27.--30. " CHANENDPT ,Channel Endpoint Number" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x00 25.--26. " TYPE ,Type" "IN/OUT,Zero-length,CSPLIT,Disabled" textline " " bitfld.long 0x00 24. " TERM ,Terminate" "Not terminated,Terminated" hexmask.long.byte 0x00 16.--23. 1. " PTXQSPCAVAIL ,Periodic Transmit Request Queue Space Available" hexmask.long.word 0x00 0.--15. 1. " PTXFSPCAVAIL ,Periodic Transmit Data FIFO Space Available" line.long 0x04 "HAINT,Host All Channels Interrupt Register" bitfld.long 0x04 15. " HAINT_[15] ,Channel 15 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 14. " [14] ,Channel 14 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 13. " [13] ,Channel 13 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 12. " [12] ,Channel 12 Interrupts" "No interrupt,Interrupt" textline " " bitfld.long 0x04 11. " [11] ,Channel 11 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 10. " [10] ,Channel 10 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 9. " [9] ,Channel 9 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 8. " [8] ,Channel 8 Interrupts" "No interrupt,Interrupt" textline " " bitfld.long 0x04 7. " [7] ,Channel 7 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 6. " [6] ,Channel 6 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 5. " [5] ,Channel 5 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 4. " [4] ,Channel 4 Interrupts" "No interrupt,Interrupt" textline " " bitfld.long 0x04 3. " [3] ,Channel 3 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 2. " [2] ,Channel 2 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 1. " [1] ,Channel 1 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 0. " [0] ,Channel 0 Interrupts" "No interrupt,Interrupt" group.long 0x418++0x07 line.long 0x00 "HAINTMSK,Host All Channels Interrupt Mask Register" bitfld.long 0x00 15. " HAINTMSK_[15] ,Channel 15 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 14. " [14] ,Channel 14 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 13. " [13] ,Channel 13 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 12. " [12] ,Channel 12 Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 11. " [11] ,Channel 11 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 10. " [10] ,Channel 10 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 9. " [9] ,Channel 9 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 8. " [8] ,Channel 8 Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 7. " [7] ,Channel 7 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 6. " [6] ,Channel 6 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 5. " [5] ,Channel 5 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 4. " [4] ,Channel 4 Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 3. " [3] ,Channel 3 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 2. " [2] ,Channel 2 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 1. " [1] ,Channel 1 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 0. " [0] ,Channel 0 Interrupt Mask" "Masked,Not masked" line.long 0x04 "HFLBADDR,Host Frame List Base Address Register" group.long 0x0440++0x03 line.long 0x00 "HPRT,Host Port Control and Status Register" rbitfld.long 0x00 17.--18. " PRTSPD ,Port Speed" "High speed,Full speed,Low speed,?..." bitfld.long 0x00 13.--16. " PRTTSTCTL ,Port Test Control" "Disabled,Test_J,Test_K,Test_SE0_NAK,Test_Packet,Test_force_Enable,?..." bitfld.long 0x00 12. " PRTPWR ,Port Power" "Off,On" textline " " rbitfld.long 0x00 10.--11. " PRTLNSTS ,Port Line Status" ",D+,D-,?..." bitfld.long 0x00 8. " PRTRST ,Port Reset" "No effect,Reset" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 7. " PRTSUSP ,Port Suspend" "Not suspend mode,Suspend mode" textline " " else rbitfld.long 0x00 7. " PRTSUSP ,Port Suspend" "Not suspend mode,Suspend mode" textline " " endif bitfld.long 0x00 6. " PRTRES ,Port Resume" "No resume,Resume" eventfld.long 0x00 5. " PRTOVRCURRCHNG ,Port Overcurrent Change" "Not occurred,Occurred" rbitfld.long 0x00 4. " PRTOVRCURRACT ,Port Overcurrent Active" "No overcurrent,Overcurrent" textline " " eventfld.long 0x00 3. " PRTENCHNG ,Port Enable/Disable Change" "Disabled,Enabled" rbitfld.long 0x00 2. " PRTENA ,Port Enable" "Disabled,Enabled" eventfld.long 0x00 1. " PRTCONNDET ,Port Connect Detected" "Not detected,Detected" textline " " rbitfld.long 0x00 0. " PRTCONNSTS ,Port Connect Status" "Not attached,Attached" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x500++0x03 "Channel 0" line.long 0x00 "HCCHAR0,Host Channel-0 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x500++0x03 "Channel 0" line.long 0x00 "HCCHAR0,Host Channel-0 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x500++0x03 "Channel 0" line.long 0x00 "HCCHAR0,Host Channel-0 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x500+0x04)++0x03 line.long 0x00 "HCSPLT0,Host Channel 0 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x500+0x08)++0x07 line.long 0x00 "HCINT0,Host Channel-0 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK0,Host Channel-0 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x500+0x08)++0x07 line.long 0x00 "HCINT0,Host Channel-0 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK0,Host Channel-0 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x500+0x08)++0x07 line.long 0x00 "HCINT0,Host Channel-0 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK0,Host Channel-0 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x500+0x10)++0x07 line.long 0x00 "HCTSIZ0,Host Channel-0 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA0,Host Channel 0 DMA Address Register" hgroup.long (0x500+0x18)++0x03 hide.long 0x00 "HCDMAB0,Host Channel 0 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x500+0x10)++0x07 hide.long 0x00 "HCTSIZ0,Host Channel-0 Transfer Size Register" hide.long 0x04 "HCDMA0,Host Channel-n DMA Address Register" group.long (0x500+0x18)++0x03 line.long 0x00 "HCDMAB0,Host Channel 0 DMA Buffer Address Register" else hgroup.long (0x500+0x10)++0x0B hide.long 0x00 "HCTSIZ0,Host Channel-0 Transfer Size Register" hide.long 0x04 "HCDMA0,Host Channel-0 DMA Address Register" hide.long 0x08 "HCDMAB0,Host Channel 0 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x520++0x03 "Channel 1" line.long 0x00 "HCCHAR1,Host Channel-1 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x520++0x03 "Channel 1" line.long 0x00 "HCCHAR1,Host Channel-1 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x520++0x03 "Channel 1" line.long 0x00 "HCCHAR1,Host Channel-1 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x520+0x04)++0x03 line.long 0x00 "HCSPLT1,Host Channel 1 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x520+0x08)++0x07 line.long 0x00 "HCINT1,Host Channel-1 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK1,Host Channel-1 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x520+0x08)++0x07 line.long 0x00 "HCINT1,Host Channel-1 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK1,Host Channel-1 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x520+0x08)++0x07 line.long 0x00 "HCINT1,Host Channel-1 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK1,Host Channel-1 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x520+0x10)++0x07 line.long 0x00 "HCTSIZ1,Host Channel-1 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA1,Host Channel 1 DMA Address Register" hgroup.long (0x520+0x18)++0x03 hide.long 0x00 "HCDMAB1,Host Channel 1 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x520+0x10)++0x07 hide.long 0x00 "HCTSIZ1,Host Channel-1 Transfer Size Register" hide.long 0x04 "HCDMA1,Host Channel-n DMA Address Register" group.long (0x520+0x18)++0x03 line.long 0x00 "HCDMAB1,Host Channel 1 DMA Buffer Address Register" else hgroup.long (0x520+0x10)++0x0B hide.long 0x00 "HCTSIZ1,Host Channel-1 Transfer Size Register" hide.long 0x04 "HCDMA1,Host Channel-1 DMA Address Register" hide.long 0x08 "HCDMAB1,Host Channel 1 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x540++0x03 "Channel 2" line.long 0x00 "HCCHAR2,Host Channel-2 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x540++0x03 "Channel 2" line.long 0x00 "HCCHAR2,Host Channel-2 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x540++0x03 "Channel 2" line.long 0x00 "HCCHAR2,Host Channel-2 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x540+0x04)++0x03 line.long 0x00 "HCSPLT2,Host Channel 2 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x540+0x08)++0x07 line.long 0x00 "HCINT2,Host Channel-2 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK2,Host Channel-2 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x540+0x08)++0x07 line.long 0x00 "HCINT2,Host Channel-2 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK2,Host Channel-2 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x540+0x08)++0x07 line.long 0x00 "HCINT2,Host Channel-2 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK2,Host Channel-2 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x540+0x10)++0x07 line.long 0x00 "HCTSIZ2,Host Channel-2 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA2,Host Channel 2 DMA Address Register" hgroup.long (0x540+0x18)++0x03 hide.long 0x00 "HCDMAB2,Host Channel 2 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x540+0x10)++0x07 hide.long 0x00 "HCTSIZ2,Host Channel-2 Transfer Size Register" hide.long 0x04 "HCDMA2,Host Channel-n DMA Address Register" group.long (0x540+0x18)++0x03 line.long 0x00 "HCDMAB2,Host Channel 2 DMA Buffer Address Register" else hgroup.long (0x540+0x10)++0x0B hide.long 0x00 "HCTSIZ2,Host Channel-2 Transfer Size Register" hide.long 0x04 "HCDMA2,Host Channel-2 DMA Address Register" hide.long 0x08 "HCDMAB2,Host Channel 2 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x560++0x03 "Channel 3" line.long 0x00 "HCCHAR3,Host Channel-3 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x560++0x03 "Channel 3" line.long 0x00 "HCCHAR3,Host Channel-3 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x560++0x03 "Channel 3" line.long 0x00 "HCCHAR3,Host Channel-3 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x560+0x04)++0x03 line.long 0x00 "HCSPLT3,Host Channel 3 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x560+0x08)++0x07 line.long 0x00 "HCINT3,Host Channel-3 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK3,Host Channel-3 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x560+0x08)++0x07 line.long 0x00 "HCINT3,Host Channel-3 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK3,Host Channel-3 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x560+0x08)++0x07 line.long 0x00 "HCINT3,Host Channel-3 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK3,Host Channel-3 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x560+0x10)++0x07 line.long 0x00 "HCTSIZ3,Host Channel-3 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA3,Host Channel 3 DMA Address Register" hgroup.long (0x560+0x18)++0x03 hide.long 0x00 "HCDMAB3,Host Channel 3 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x560+0x10)++0x07 hide.long 0x00 "HCTSIZ3,Host Channel-3 Transfer Size Register" hide.long 0x04 "HCDMA3,Host Channel-n DMA Address Register" group.long (0x560+0x18)++0x03 line.long 0x00 "HCDMAB3,Host Channel 3 DMA Buffer Address Register" else hgroup.long (0x560+0x10)++0x0B hide.long 0x00 "HCTSIZ3,Host Channel-3 Transfer Size Register" hide.long 0x04 "HCDMA3,Host Channel-3 DMA Address Register" hide.long 0x08 "HCDMAB3,Host Channel 3 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x580++0x03 "Channel 4" line.long 0x00 "HCCHAR4,Host Channel-4 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x580++0x03 "Channel 4" line.long 0x00 "HCCHAR4,Host Channel-4 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x580++0x03 "Channel 4" line.long 0x00 "HCCHAR4,Host Channel-4 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x580+0x04)++0x03 line.long 0x00 "HCSPLT4,Host Channel 4 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x580+0x08)++0x07 line.long 0x00 "HCINT4,Host Channel-4 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK4,Host Channel-4 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x580+0x08)++0x07 line.long 0x00 "HCINT4,Host Channel-4 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK4,Host Channel-4 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x580+0x08)++0x07 line.long 0x00 "HCINT4,Host Channel-4 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK4,Host Channel-4 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x580+0x10)++0x07 line.long 0x00 "HCTSIZ4,Host Channel-4 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA4,Host Channel 4 DMA Address Register" hgroup.long (0x580+0x18)++0x03 hide.long 0x00 "HCDMAB4,Host Channel 4 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x580+0x10)++0x07 hide.long 0x00 "HCTSIZ4,Host Channel-4 Transfer Size Register" hide.long 0x04 "HCDMA4,Host Channel-n DMA Address Register" group.long (0x580+0x18)++0x03 line.long 0x00 "HCDMAB4,Host Channel 4 DMA Buffer Address Register" else hgroup.long (0x580+0x10)++0x0B hide.long 0x00 "HCTSIZ4,Host Channel-4 Transfer Size Register" hide.long 0x04 "HCDMA4,Host Channel-4 DMA Address Register" hide.long 0x08 "HCDMAB4,Host Channel 4 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x5A0++0x03 "Channel 5" line.long 0x00 "HCCHAR5,Host Channel-5 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x5A0++0x03 "Channel 5" line.long 0x00 "HCCHAR5,Host Channel-5 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x5A0++0x03 "Channel 5" line.long 0x00 "HCCHAR5,Host Channel-5 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x5A0+0x04)++0x03 line.long 0x00 "HCSPLT5,Host Channel 5 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x5A0+0x08)++0x07 line.long 0x00 "HCINT5,Host Channel-5 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK5,Host Channel-5 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x5A0+0x08)++0x07 line.long 0x00 "HCINT5,Host Channel-5 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK5,Host Channel-5 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x5A0+0x08)++0x07 line.long 0x00 "HCINT5,Host Channel-5 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK5,Host Channel-5 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x5A0+0x10)++0x07 line.long 0x00 "HCTSIZ5,Host Channel-5 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA5,Host Channel 5 DMA Address Register" hgroup.long (0x5A0+0x18)++0x03 hide.long 0x00 "HCDMAB5,Host Channel 5 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x5A0+0x10)++0x07 hide.long 0x00 "HCTSIZ5,Host Channel-5 Transfer Size Register" hide.long 0x04 "HCDMA5,Host Channel-n DMA Address Register" group.long (0x5A0+0x18)++0x03 line.long 0x00 "HCDMAB5,Host Channel 5 DMA Buffer Address Register" else hgroup.long (0x5A0+0x10)++0x0B hide.long 0x00 "HCTSIZ5,Host Channel-5 Transfer Size Register" hide.long 0x04 "HCDMA5,Host Channel-5 DMA Address Register" hide.long 0x08 "HCDMAB5,Host Channel 5 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x5C0++0x03 "Channel 6" line.long 0x00 "HCCHAR6,Host Channel-6 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x5C0++0x03 "Channel 6" line.long 0x00 "HCCHAR6,Host Channel-6 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x5C0++0x03 "Channel 6" line.long 0x00 "HCCHAR6,Host Channel-6 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x5C0+0x04)++0x03 line.long 0x00 "HCSPLT6,Host Channel 6 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x5C0+0x08)++0x07 line.long 0x00 "HCINT6,Host Channel-6 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK6,Host Channel-6 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x5C0+0x08)++0x07 line.long 0x00 "HCINT6,Host Channel-6 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK6,Host Channel-6 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x5C0+0x08)++0x07 line.long 0x00 "HCINT6,Host Channel-6 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK6,Host Channel-6 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x5C0+0x10)++0x07 line.long 0x00 "HCTSIZ6,Host Channel-6 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA6,Host Channel 6 DMA Address Register" hgroup.long (0x5C0+0x18)++0x03 hide.long 0x00 "HCDMAB6,Host Channel 6 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x5C0+0x10)++0x07 hide.long 0x00 "HCTSIZ6,Host Channel-6 Transfer Size Register" hide.long 0x04 "HCDMA6,Host Channel-n DMA Address Register" group.long (0x5C0+0x18)++0x03 line.long 0x00 "HCDMAB6,Host Channel 6 DMA Buffer Address Register" else hgroup.long (0x5C0+0x10)++0x0B hide.long 0x00 "HCTSIZ6,Host Channel-6 Transfer Size Register" hide.long 0x04 "HCDMA6,Host Channel-6 DMA Address Register" hide.long 0x08 "HCDMAB6,Host Channel 6 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x5E0++0x03 "Channel 7" line.long 0x00 "HCCHAR7,Host Channel-7 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x5E0++0x03 "Channel 7" line.long 0x00 "HCCHAR7,Host Channel-7 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x5E0++0x03 "Channel 7" line.long 0x00 "HCCHAR7,Host Channel-7 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x5E0+0x04)++0x03 line.long 0x00 "HCSPLT7,Host Channel 7 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x5E0+0x08)++0x07 line.long 0x00 "HCINT7,Host Channel-7 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK7,Host Channel-7 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x5E0+0x08)++0x07 line.long 0x00 "HCINT7,Host Channel-7 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK7,Host Channel-7 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x5E0+0x08)++0x07 line.long 0x00 "HCINT7,Host Channel-7 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK7,Host Channel-7 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x5E0+0x10)++0x07 line.long 0x00 "HCTSIZ7,Host Channel-7 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA7,Host Channel 7 DMA Address Register" hgroup.long (0x5E0+0x18)++0x03 hide.long 0x00 "HCDMAB7,Host Channel 7 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x5E0+0x10)++0x07 hide.long 0x00 "HCTSIZ7,Host Channel-7 Transfer Size Register" hide.long 0x04 "HCDMA7,Host Channel-n DMA Address Register" group.long (0x5E0+0x18)++0x03 line.long 0x00 "HCDMAB7,Host Channel 7 DMA Buffer Address Register" else hgroup.long (0x5E0+0x10)++0x0B hide.long 0x00 "HCTSIZ7,Host Channel-7 Transfer Size Register" hide.long 0x04 "HCDMA7,Host Channel-7 DMA Address Register" hide.long 0x08 "HCDMAB7,Host Channel 7 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x600++0x03 "Channel 8" line.long 0x00 "HCCHAR8,Host Channel-8 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x600++0x03 "Channel 8" line.long 0x00 "HCCHAR8,Host Channel-8 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x600++0x03 "Channel 8" line.long 0x00 "HCCHAR8,Host Channel-8 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x600+0x04)++0x03 line.long 0x00 "HCSPLT8,Host Channel 8 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x600+0x08)++0x07 line.long 0x00 "HCINT8,Host Channel-8 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK8,Host Channel-8 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x600+0x08)++0x07 line.long 0x00 "HCINT8,Host Channel-8 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK8,Host Channel-8 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x600+0x08)++0x07 line.long 0x00 "HCINT8,Host Channel-8 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK8,Host Channel-8 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x600+0x10)++0x07 line.long 0x00 "HCTSIZ8,Host Channel-8 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA8,Host Channel 8 DMA Address Register" hgroup.long (0x600+0x18)++0x03 hide.long 0x00 "HCDMAB8,Host Channel 8 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x600+0x10)++0x07 hide.long 0x00 "HCTSIZ8,Host Channel-8 Transfer Size Register" hide.long 0x04 "HCDMA8,Host Channel-n DMA Address Register" group.long (0x600+0x18)++0x03 line.long 0x00 "HCDMAB8,Host Channel 8 DMA Buffer Address Register" else hgroup.long (0x600+0x10)++0x0B hide.long 0x00 "HCTSIZ8,Host Channel-8 Transfer Size Register" hide.long 0x04 "HCDMA8,Host Channel-8 DMA Address Register" hide.long 0x08 "HCDMAB8,Host Channel 8 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x620++0x03 "Channel 9" line.long 0x00 "HCCHAR9,Host Channel-9 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x620++0x03 "Channel 9" line.long 0x00 "HCCHAR9,Host Channel-9 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x620++0x03 "Channel 9" line.long 0x00 "HCCHAR9,Host Channel-9 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x620+0x04)++0x03 line.long 0x00 "HCSPLT9,Host Channel 9 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x620+0x08)++0x07 line.long 0x00 "HCINT9,Host Channel-9 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK9,Host Channel-9 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x620+0x08)++0x07 line.long 0x00 "HCINT9,Host Channel-9 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK9,Host Channel-9 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x620+0x08)++0x07 line.long 0x00 "HCINT9,Host Channel-9 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK9,Host Channel-9 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x620+0x10)++0x07 line.long 0x00 "HCTSIZ9,Host Channel-9 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA9,Host Channel 9 DMA Address Register" hgroup.long (0x620+0x18)++0x03 hide.long 0x00 "HCDMAB9,Host Channel 9 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x620+0x10)++0x07 hide.long 0x00 "HCTSIZ9,Host Channel-9 Transfer Size Register" hide.long 0x04 "HCDMA9,Host Channel-n DMA Address Register" group.long (0x620+0x18)++0x03 line.long 0x00 "HCDMAB9,Host Channel 9 DMA Buffer Address Register" else hgroup.long (0x620+0x10)++0x0B hide.long 0x00 "HCTSIZ9,Host Channel-9 Transfer Size Register" hide.long 0x04 "HCDMA9,Host Channel-9 DMA Address Register" hide.long 0x08 "HCDMAB9,Host Channel 9 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x640++0x03 "Channel 10" line.long 0x00 "HCCHAR10,Host Channel-10 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x640++0x03 "Channel 10" line.long 0x00 "HCCHAR10,Host Channel-10 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x640++0x03 "Channel 10" line.long 0x00 "HCCHAR10,Host Channel-10 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x640+0x04)++0x03 line.long 0x00 "HCSPLT10,Host Channel 10 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x640+0x08)++0x07 line.long 0x00 "HCINT10,Host Channel-10 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK10,Host Channel-10 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x640+0x08)++0x07 line.long 0x00 "HCINT10,Host Channel-10 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK10,Host Channel-10 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x640+0x08)++0x07 line.long 0x00 "HCINT10,Host Channel-10 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK10,Host Channel-10 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x640+0x10)++0x07 line.long 0x00 "HCTSIZ10,Host Channel-10 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA10,Host Channel 10 DMA Address Register" hgroup.long (0x640+0x18)++0x03 hide.long 0x00 "HCDMAB10,Host Channel 10 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x640+0x10)++0x07 hide.long 0x00 "HCTSIZ10,Host Channel-10 Transfer Size Register" hide.long 0x04 "HCDMA10,Host Channel-n DMA Address Register" group.long (0x640+0x18)++0x03 line.long 0x00 "HCDMAB10,Host Channel 10 DMA Buffer Address Register" else hgroup.long (0x640+0x10)++0x0B hide.long 0x00 "HCTSIZ10,Host Channel-10 Transfer Size Register" hide.long 0x04 "HCDMA10,Host Channel-10 DMA Address Register" hide.long 0x08 "HCDMAB10,Host Channel 10 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x660++0x03 "Channel 11" line.long 0x00 "HCCHAR11,Host Channel-11 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x660++0x03 "Channel 11" line.long 0x00 "HCCHAR11,Host Channel-11 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x660++0x03 "Channel 11" line.long 0x00 "HCCHAR11,Host Channel-11 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x660+0x04)++0x03 line.long 0x00 "HCSPLT11,Host Channel 11 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x660+0x08)++0x07 line.long 0x00 "HCINT11,Host Channel-11 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK11,Host Channel-11 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x660+0x08)++0x07 line.long 0x00 "HCINT11,Host Channel-11 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK11,Host Channel-11 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x660+0x08)++0x07 line.long 0x00 "HCINT11,Host Channel-11 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK11,Host Channel-11 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x660+0x10)++0x07 line.long 0x00 "HCTSIZ11,Host Channel-11 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA11,Host Channel 11 DMA Address Register" hgroup.long (0x660+0x18)++0x03 hide.long 0x00 "HCDMAB11,Host Channel 11 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x660+0x10)++0x07 hide.long 0x00 "HCTSIZ11,Host Channel-11 Transfer Size Register" hide.long 0x04 "HCDMA11,Host Channel-n DMA Address Register" group.long (0x660+0x18)++0x03 line.long 0x00 "HCDMAB11,Host Channel 11 DMA Buffer Address Register" else hgroup.long (0x660+0x10)++0x0B hide.long 0x00 "HCTSIZ11,Host Channel-11 Transfer Size Register" hide.long 0x04 "HCDMA11,Host Channel-11 DMA Address Register" hide.long 0x08 "HCDMAB11,Host Channel 11 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x680++0x03 "Channel 12" line.long 0x00 "HCCHAR12,Host Channel-12 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x680++0x03 "Channel 12" line.long 0x00 "HCCHAR12,Host Channel-12 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x680++0x03 "Channel 12" line.long 0x00 "HCCHAR12,Host Channel-12 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x680+0x04)++0x03 line.long 0x00 "HCSPLT12,Host Channel 12 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x680+0x08)++0x07 line.long 0x00 "HCINT12,Host Channel-12 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK12,Host Channel-12 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x680+0x08)++0x07 line.long 0x00 "HCINT12,Host Channel-12 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK12,Host Channel-12 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x680+0x08)++0x07 line.long 0x00 "HCINT12,Host Channel-12 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK12,Host Channel-12 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x680+0x10)++0x07 line.long 0x00 "HCTSIZ12,Host Channel-12 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA12,Host Channel 12 DMA Address Register" hgroup.long (0x680+0x18)++0x03 hide.long 0x00 "HCDMAB12,Host Channel 12 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x680+0x10)++0x07 hide.long 0x00 "HCTSIZ12,Host Channel-12 Transfer Size Register" hide.long 0x04 "HCDMA12,Host Channel-n DMA Address Register" group.long (0x680+0x18)++0x03 line.long 0x00 "HCDMAB12,Host Channel 12 DMA Buffer Address Register" else hgroup.long (0x680+0x10)++0x0B hide.long 0x00 "HCTSIZ12,Host Channel-12 Transfer Size Register" hide.long 0x04 "HCDMA12,Host Channel-12 DMA Address Register" hide.long 0x08 "HCDMAB12,Host Channel 12 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x6A0++0x03 "Channel 13" line.long 0x00 "HCCHAR13,Host Channel-13 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x6A0++0x03 "Channel 13" line.long 0x00 "HCCHAR13,Host Channel-13 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x6A0++0x03 "Channel 13" line.long 0x00 "HCCHAR13,Host Channel-13 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x6A0+0x04)++0x03 line.long 0x00 "HCSPLT13,Host Channel 13 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x6A0+0x08)++0x07 line.long 0x00 "HCINT13,Host Channel-13 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK13,Host Channel-13 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x6A0+0x08)++0x07 line.long 0x00 "HCINT13,Host Channel-13 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK13,Host Channel-13 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x6A0+0x08)++0x07 line.long 0x00 "HCINT13,Host Channel-13 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK13,Host Channel-13 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x6A0+0x10)++0x07 line.long 0x00 "HCTSIZ13,Host Channel-13 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA13,Host Channel 13 DMA Address Register" hgroup.long (0x6A0+0x18)++0x03 hide.long 0x00 "HCDMAB13,Host Channel 13 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x6A0+0x10)++0x07 hide.long 0x00 "HCTSIZ13,Host Channel-13 Transfer Size Register" hide.long 0x04 "HCDMA13,Host Channel-n DMA Address Register" group.long (0x6A0+0x18)++0x03 line.long 0x00 "HCDMAB13,Host Channel 13 DMA Buffer Address Register" else hgroup.long (0x6A0+0x10)++0x0B hide.long 0x00 "HCTSIZ13,Host Channel-13 Transfer Size Register" hide.long 0x04 "HCDMA13,Host Channel-13 DMA Address Register" hide.long 0x08 "HCDMAB13,Host Channel 13 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x6C0++0x03 "Channel 14" line.long 0x00 "HCCHAR14,Host Channel-14 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x6C0++0x03 "Channel 14" line.long 0x00 "HCCHAR14,Host Channel-14 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x6C0++0x03 "Channel 14" line.long 0x00 "HCCHAR14,Host Channel-14 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x6C0+0x04)++0x03 line.long 0x00 "HCSPLT14,Host Channel 14 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x6C0+0x08)++0x07 line.long 0x00 "HCINT14,Host Channel-14 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK14,Host Channel-14 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x6C0+0x08)++0x07 line.long 0x00 "HCINT14,Host Channel-14 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK14,Host Channel-14 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x6C0+0x08)++0x07 line.long 0x00 "HCINT14,Host Channel-14 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK14,Host Channel-14 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x6C0+0x10)++0x07 line.long 0x00 "HCTSIZ14,Host Channel-14 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA14,Host Channel 14 DMA Address Register" hgroup.long (0x6C0+0x18)++0x03 hide.long 0x00 "HCDMAB14,Host Channel 14 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x6C0+0x10)++0x07 hide.long 0x00 "HCTSIZ14,Host Channel-14 Transfer Size Register" hide.long 0x04 "HCDMA14,Host Channel-n DMA Address Register" group.long (0x6C0+0x18)++0x03 line.long 0x00 "HCDMAB14,Host Channel 14 DMA Buffer Address Register" else hgroup.long (0x6C0+0x10)++0x0B hide.long 0x00 "HCTSIZ14,Host Channel-14 Transfer Size Register" hide.long 0x04 "HCDMA14,Host Channel-14 DMA Address Register" hide.long 0x08 "HCDMAB14,Host Channel 14 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x6E0++0x03 "Channel 15" line.long 0x00 "HCCHAR15,Host Channel-15 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB00000+0x08))&0x20)==0x20) group.long 0x6E0++0x03 "Channel 15" line.long 0x00 "HCCHAR15,Host Channel-15 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x6E0++0x03 "Channel 15" line.long 0x00 "HCCHAR15,Host Channel-15 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x6E0+0x04)++0x03 line.long 0x00 "HCSPLT15,Host Channel 15 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x6E0+0x08)++0x07 line.long 0x00 "HCINT15,Host Channel-15 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK15,Host Channel-15 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x6E0+0x08)++0x07 line.long 0x00 "HCINT15,Host Channel-15 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK15,Host Channel-15 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x6E0+0x08)++0x07 line.long 0x00 "HCINT15,Host Channel-15 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK15,Host Channel-15 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x00)) group.long (0x6E0+0x10)++0x07 line.long 0x00 "HCTSIZ15,Host Channel-15 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA15,Host Channel 15 DMA Address Register" hgroup.long (0x6E0+0x18)++0x03 hide.long 0x00 "HCDMAB15,Host Channel 15 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) hgroup.long (0x6E0+0x10)++0x07 hide.long 0x00 "HCTSIZ15,Host Channel-15 Transfer Size Register" hide.long 0x04 "HCDMA15,Host Channel-n DMA Address Register" group.long (0x6E0+0x18)++0x03 line.long 0x00 "HCDMAB15,Host Channel 15 DMA Buffer Address Register" else hgroup.long (0x6E0+0x10)++0x0B hide.long 0x00 "HCTSIZ15,Host Channel-15 Transfer Size Register" hide.long 0x04 "HCDMA15,Host Channel-15 DMA Address Register" hide.long 0x08 "HCDMAB15,Host Channel 15 DMA Buffer Address Register" endif else hgroup.long 0x0400++0x0B hide.long 0x00 "HCFG,Host Configuration Register" hide.long 0x04 "HFIR,Host Frame Interval Register" hide.long 0x08 "HFNUM,Host Frame Number/Frame Time Remaining Register" hgroup.long 0x0410++0x0F hide.long 0x00 "HPTXSTS,Host Periodic Transmit FIFO/Queue Status Register" hide.long 0x04 "HAINT,Host All Channels Interrupt Register" hide.long 0x08 "HAINTMSK,Host All Channels Interrupt Mask Register" hide.long 0x0C "HFLBADDR,Host Frame List Base Address Register" hgroup.long 0x0440++0x03 hide.long 0x00 "HPRT,Host Port Control and Status Register" hgroup.long 0x500++0x03 "Channel 0" hide.long 0x00 "HCCHAR0,Host Channel-0 Characteristics Register" hgroup.long (0x500+0x08)++0x07 hide.long 0x00 "HCINT0,Host Channel-0 Interrupt Register" hide.long 0x04 "HCINTMSK0,Host Channel-0 Interrupt Mask Register" hgroup.long (0x500+0x10)++0x07 hide.long 0x00 "HCTSIZ0,Host Channel-0 Transfer Size Register" hide.long 0x04 "HCDMA0,Host Channel-n DMA Address Register" hgroup.long (0x500+0x18)++0x03 hide.long 0x00 "HCDMAB0,Host Channel-0 DMA Buffer Address Register" hgroup.long 0x520++0x03 "Channel 1" hide.long 0x00 "HCCHAR1,Host Channel-1 Characteristics Register" hgroup.long (0x520+0x08)++0x07 hide.long 0x00 "HCINT1,Host Channel-1 Interrupt Register" hide.long 0x04 "HCINTMSK1,Host Channel-1 Interrupt Mask Register" hgroup.long (0x520+0x10)++0x07 hide.long 0x00 "HCTSIZ1,Host Channel-1 Transfer Size Register" hide.long 0x04 "HCDMA1,Host Channel-n DMA Address Register" hgroup.long (0x520+0x18)++0x03 hide.long 0x00 "HCDMAB1,Host Channel-1 DMA Buffer Address Register" hgroup.long 0x540++0x03 "Channel 2" hide.long 0x00 "HCCHAR2,Host Channel-2 Characteristics Register" hgroup.long (0x540+0x08)++0x07 hide.long 0x00 "HCINT2,Host Channel-2 Interrupt Register" hide.long 0x04 "HCINTMSK2,Host Channel-2 Interrupt Mask Register" hgroup.long (0x540+0x10)++0x07 hide.long 0x00 "HCTSIZ2,Host Channel-2 Transfer Size Register" hide.long 0x04 "HCDMA2,Host Channel-n DMA Address Register" hgroup.long (0x540+0x18)++0x03 hide.long 0x00 "HCDMAB2,Host Channel-2 DMA Buffer Address Register" hgroup.long 0x560++0x03 "Channel 3" hide.long 0x00 "HCCHAR3,Host Channel-3 Characteristics Register" hgroup.long (0x560+0x08)++0x07 hide.long 0x00 "HCINT3,Host Channel-3 Interrupt Register" hide.long 0x04 "HCINTMSK3,Host Channel-3 Interrupt Mask Register" hgroup.long (0x560+0x10)++0x07 hide.long 0x00 "HCTSIZ3,Host Channel-3 Transfer Size Register" hide.long 0x04 "HCDMA3,Host Channel-n DMA Address Register" hgroup.long (0x560+0x18)++0x03 hide.long 0x00 "HCDMAB3,Host Channel-3 DMA Buffer Address Register" hgroup.long 0x580++0x03 "Channel 4" hide.long 0x00 "HCCHAR4,Host Channel-4 Characteristics Register" hgroup.long (0x580+0x08)++0x07 hide.long 0x00 "HCINT4,Host Channel-4 Interrupt Register" hide.long 0x04 "HCINTMSK4,Host Channel-4 Interrupt Mask Register" hgroup.long (0x580+0x10)++0x07 hide.long 0x00 "HCTSIZ4,Host Channel-4 Transfer Size Register" hide.long 0x04 "HCDMA4,Host Channel-n DMA Address Register" hgroup.long (0x580+0x18)++0x03 hide.long 0x00 "HCDMAB4,Host Channel-4 DMA Buffer Address Register" hgroup.long 0x5A0++0x03 "Channel 5" hide.long 0x00 "HCCHAR5,Host Channel-5 Characteristics Register" hgroup.long (0x5A0+0x08)++0x07 hide.long 0x00 "HCINT5,Host Channel-5 Interrupt Register" hide.long 0x04 "HCINTMSK5,Host Channel-5 Interrupt Mask Register" hgroup.long (0x5A0+0x10)++0x07 hide.long 0x00 "HCTSIZ5,Host Channel-5 Transfer Size Register" hide.long 0x04 "HCDMA5,Host Channel-n DMA Address Register" hgroup.long (0x5A0+0x18)++0x03 hide.long 0x00 "HCDMAB5,Host Channel-5 DMA Buffer Address Register" hgroup.long 0x5C0++0x03 "Channel 6" hide.long 0x00 "HCCHAR6,Host Channel-6 Characteristics Register" hgroup.long (0x5C0+0x08)++0x07 hide.long 0x00 "HCINT6,Host Channel-6 Interrupt Register" hide.long 0x04 "HCINTMSK6,Host Channel-6 Interrupt Mask Register" hgroup.long (0x5C0+0x10)++0x07 hide.long 0x00 "HCTSIZ6,Host Channel-6 Transfer Size Register" hide.long 0x04 "HCDMA6,Host Channel-n DMA Address Register" hgroup.long (0x5C0+0x18)++0x03 hide.long 0x00 "HCDMAB6,Host Channel-6 DMA Buffer Address Register" hgroup.long 0x5E0++0x03 "Channel 7" hide.long 0x00 "HCCHAR7,Host Channel-7 Characteristics Register" hgroup.long (0x5E0+0x08)++0x07 hide.long 0x00 "HCINT7,Host Channel-7 Interrupt Register" hide.long 0x04 "HCINTMSK7,Host Channel-7 Interrupt Mask Register" hgroup.long (0x5E0+0x10)++0x07 hide.long 0x00 "HCTSIZ7,Host Channel-7 Transfer Size Register" hide.long 0x04 "HCDMA7,Host Channel-n DMA Address Register" hgroup.long (0x5E0+0x18)++0x03 hide.long 0x00 "HCDMAB7,Host Channel-7 DMA Buffer Address Register" hgroup.long 0x600++0x03 "Channel 8" hide.long 0x00 "HCCHAR8,Host Channel-8 Characteristics Register" hgroup.long (0x600+0x08)++0x07 hide.long 0x00 "HCINT8,Host Channel-8 Interrupt Register" hide.long 0x04 "HCINTMSK8,Host Channel-8 Interrupt Mask Register" hgroup.long (0x600+0x10)++0x07 hide.long 0x00 "HCTSIZ8,Host Channel-8 Transfer Size Register" hide.long 0x04 "HCDMA8,Host Channel-n DMA Address Register" hgroup.long (0x600+0x18)++0x03 hide.long 0x00 "HCDMAB8,Host Channel-8 DMA Buffer Address Register" hgroup.long 0x620++0x03 "Channel 9" hide.long 0x00 "HCCHAR9,Host Channel-9 Characteristics Register" hgroup.long (0x620+0x08)++0x07 hide.long 0x00 "HCINT9,Host Channel-9 Interrupt Register" hide.long 0x04 "HCINTMSK9,Host Channel-9 Interrupt Mask Register" hgroup.long (0x620+0x10)++0x07 hide.long 0x00 "HCTSIZ9,Host Channel-9 Transfer Size Register" hide.long 0x04 "HCDMA9,Host Channel-n DMA Address Register" hgroup.long (0x620+0x18)++0x03 hide.long 0x00 "HCDMAB9,Host Channel-9 DMA Buffer Address Register" hgroup.long 0x640++0x03 "Channel 10" hide.long 0x00 "HCCHAR10,Host Channel-10 Characteristics Register" hgroup.long (0x640+0x08)++0x07 hide.long 0x00 "HCINT10,Host Channel-10 Interrupt Register" hide.long 0x04 "HCINTMSK10,Host Channel-10 Interrupt Mask Register" hgroup.long (0x640+0x10)++0x07 hide.long 0x00 "HCTSIZ10,Host Channel-10 Transfer Size Register" hide.long 0x04 "HCDMA10,Host Channel-n DMA Address Register" hgroup.long (0x640+0x18)++0x03 hide.long 0x00 "HCDMAB10,Host Channel-10 DMA Buffer Address Register" hgroup.long 0x660++0x03 "Channel 11" hide.long 0x00 "HCCHAR11,Host Channel-11 Characteristics Register" hgroup.long (0x660+0x08)++0x07 hide.long 0x00 "HCINT11,Host Channel-11 Interrupt Register" hide.long 0x04 "HCINTMSK11,Host Channel-11 Interrupt Mask Register" hgroup.long (0x660+0x10)++0x07 hide.long 0x00 "HCTSIZ11,Host Channel-11 Transfer Size Register" hide.long 0x04 "HCDMA11,Host Channel-n DMA Address Register" hgroup.long (0x660+0x18)++0x03 hide.long 0x00 "HCDMAB11,Host Channel-11 DMA Buffer Address Register" hgroup.long 0x680++0x03 "Channel 12" hide.long 0x00 "HCCHAR12,Host Channel-12 Characteristics Register" hgroup.long (0x680+0x08)++0x07 hide.long 0x00 "HCINT12,Host Channel-12 Interrupt Register" hide.long 0x04 "HCINTMSK12,Host Channel-12 Interrupt Mask Register" hgroup.long (0x680+0x10)++0x07 hide.long 0x00 "HCTSIZ12,Host Channel-12 Transfer Size Register" hide.long 0x04 "HCDMA12,Host Channel-n DMA Address Register" hgroup.long (0x680+0x18)++0x03 hide.long 0x00 "HCDMAB12,Host Channel-12 DMA Buffer Address Register" hgroup.long 0x6A0++0x03 "Channel 13" hide.long 0x00 "HCCHAR13,Host Channel-13 Characteristics Register" hgroup.long (0x6A0+0x08)++0x07 hide.long 0x00 "HCINT13,Host Channel-13 Interrupt Register" hide.long 0x04 "HCINTMSK13,Host Channel-13 Interrupt Mask Register" hgroup.long (0x6A0+0x10)++0x07 hide.long 0x00 "HCTSIZ13,Host Channel-13 Transfer Size Register" hide.long 0x04 "HCDMA13,Host Channel-n DMA Address Register" hgroup.long (0x6A0+0x18)++0x03 hide.long 0x00 "HCDMAB13,Host Channel-13 DMA Buffer Address Register" hgroup.long 0x6C0++0x03 "Channel 14" hide.long 0x00 "HCCHAR14,Host Channel-14 Characteristics Register" hgroup.long (0x6C0+0x08)++0x07 hide.long 0x00 "HCINT14,Host Channel-14 Interrupt Register" hide.long 0x04 "HCINTMSK14,Host Channel-14 Interrupt Mask Register" hgroup.long (0x6C0+0x10)++0x07 hide.long 0x00 "HCTSIZ14,Host Channel-14 Transfer Size Register" hide.long 0x04 "HCDMA14,Host Channel-n DMA Address Register" hgroup.long (0x6C0+0x18)++0x03 hide.long 0x00 "HCDMAB14,Host Channel-14 DMA Buffer Address Register" hgroup.long 0x6E0++0x03 "Channel 15" hide.long 0x00 "HCCHAR15,Host Channel-15 Characteristics Register" hgroup.long (0x6E0+0x08)++0x07 hide.long 0x00 "HCINT15,Host Channel-15 Interrupt Register" hide.long 0x04 "HCINTMSK15,Host Channel-15 Interrupt Mask Register" hgroup.long (0x6E0+0x10)++0x07 hide.long 0x00 "HCTSIZ15,Host Channel-15 Transfer Size Register" hide.long 0x04 "HCDMA15,Host Channel-n DMA Address Register" hgroup.long (0x6E0+0x18)++0x03 hide.long 0x00 "HCDMAB15,Host Channel-15 DMA Buffer Address Register" endif tree.end width 12. tree "Device mode registers" if (((d.l(ad:0xFFB00000+0x014))&0x01)==0x00) group.long 0x0800++0x03 line.long 0x00 "DCFG,Device Configuration Register" bitfld.long 0x00 26.--31. " RESVALID ,Resume Validation Period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 24.--25. " PERSCHINTVL ,Periodic Scheduling Interval" "25%,50%,75%,?..." bitfld.long 0x00 23. " DESCDMA ,Enable Scatter/Gather DMA in Device mode" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " ERRATICINTMSK ,Erratic Error Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 14. " XCVRDLY ,Delay between xcvr_sel and txvalid during Device chirp Enable" "Disabled,Enabled" textline " " endif bitfld.long 0x00 13. " ENDEVOUTNAK ,Enable Device OUT NAK" "Disabled,Enabled" bitfld.long 0x00 11.--12. " PERFRINT ,Periodic Frame Interval" "80%,85%,90%,95%" hexmask.long.byte 0x00 4.--10. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 3. " ENA32KHZSUSP ,Enable 32 KHz Suspend mode" "Disabled,Enabled" bitfld.long 0x00 2. " NZSTSOUTHSHK ,Non-Zero-Length Status OUT Handshake" "Out,Stall" bitfld.long 0x00 0.--1. " DEVSPD ,Device Speed" "High speed USB 2.0 PHY,Full speed USB 2.0 PHY,Low speed USB 1.1,Full speed USB 1.1" else hgroup.long 0x0800++0x03 hide.long 0x00 "DCFG,Device Configuration Register" endif if ((((d.l(ad:0xFFB00000+0x014))&0x01)==0x00)&&(((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long 0x0804++0x03 line.long 0x00 "DCTL,Device Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 17. " ENCONTONBNA ,Enable Continue on BNA" "Disabled,Enabled" textline " " endif bitfld.long 0x00 16. " NAKONBBLE ,Set NAK automatically on babble" "No effect,Set" bitfld.long 0x00 15. " IGNRFRMNUM ,Ignore frame number for isochronous endpoints in case of Scatter/Gather DMA" "Disabled,Enabled" bitfld.long 0x00 13.--14. " GMC ,Global Multi Count" "Invalid,1 packet,2 packets,3 packets" textline " " bitfld.long 0x00 11. " PWRONPRGDONE ,Power-On Programming Done" "Not done,Done" bitfld.long 0x00 10. " CGOUTNAK ,Clear Global OUT NAK" "No effect,Clear" bitfld.long 0x00 9. " SGOUTNAK ,Set Global OUT NAK" "No effect,Set" textline " " bitfld.long 0x00 8. " CGNPINNAK ,Clear Global Non-periodic IN NAK" "No effect,Clear" bitfld.long 0x00 7. " SGNPINNAK ,Set Global Non-periodic IN NAK" "No effect,Set" bitfld.long 0x00 4.--6. " TSTCTL ,Test Control" "Disabled,Test_J,Test_K,Test_SE0_NAK,Test_Packet,Test_Force_Enable,?..." textline " " rbitfld.long 0x00 3. " GOUTNAKSTS ,Global OUT NAK Status" "Low,High" rbitfld.long 0x00 2. " GNPINNAKSTS ,Global Non-periodic IN NAK Status" "Low,High" bitfld.long 0x00 1. " SFTDISCON ,Soft Disconnect" "Connected,Not connected" textline " " bitfld.long 0x00 0. " RMTWKUPSIG ,Remote Wakeup Signaling" "Low,High" elif (((d.l(ad:0xFFB00000+0x014))&0x01)==0x00) group.long 0x0804++0x03 line.long 0x00 "DCTL,Device Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 17. " ENCONTONBNA ,Enable Continue on BNA" "Disabled,Enabled" textline " " endif bitfld.long 0x00 16. " NAKONBBLE ,Set NAK automatically on babble" "No effect,Set" bitfld.long 0x00 15. " IGNRFRMNUM ,Ignore frame number for isochronous endpoints in case of Scatter/Gather DMA" "Disabled,Enabled" textline " " bitfld.long 0x00 11. " PWRONPRGDONE ,Power-On Programming Done" "Not done,Done" bitfld.long 0x00 10. " CGOUTNAK ,Clear Global OUT NAK" "No effect,Clear" bitfld.long 0x00 9. " SGOUTNAK ,Set Global OUT NAK" "No effect,Set" textline " " bitfld.long 0x00 8. " CGNPINNAK ,Clear Global Non-periodic IN NAK" "No effect,Clear" bitfld.long 0x00 7. " SGNPINNAK ,Set Global Non-periodic IN NAK" "No effect,Set" bitfld.long 0x00 4.--6. " TSTCTL ,Test Control" "Disabled,Test_J,Test_K,Test_SE0_NAK,Test_Packet,Test_Force_Enable,?..." textline " " rbitfld.long 0x00 3. " GOUTNAKSTS ,Global OUT NAK Status" "Low,High" rbitfld.long 0x00 2. " GNPINNAKSTS ,Global Non-periodic IN NAK Status" "Low,High" bitfld.long 0x00 1. " SFTDISCON ,Soft Disconnect" "Connected,Not connected" textline " " bitfld.long 0x00 0. " RMTWKUPSIG ,Remote Wakeup Signaling" "Low,High" else hgroup.long 0x0804++0x03 hide.long 0x04 "DCTL,Device Control Register" endif if (((d.l(ad:0xFFB00000+0x014))&0x01)==0x00) rgroup.long 0x0808++0x03 line.long 0x00 "DSTS,Device Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 23. " DEVLNSTS[1] ,Device Line D+ Status" "Low,High" bitfld.long 0x00 22. " [0] ,Device Line D- Status" "Low,High" textline " " endif hexmask.long.word 0x00 8.--21. 1. " SOFFN ,Frame Number of the Received SOF" bitfld.long 0x00 3. " ERRTICERR ,Erratic Error" "Not occurred,Occurred" bitfld.long 0x00 1.--2. " ENUMSPD ,Enumerated Speed" "High speed,Full speed,Low speed,Full speed" textline " " bitfld.long 0x00 0. " SUSPSTS ,Suspend Status" "Not detected,Detected" group.long 0x0810++0x07 line.long 0x00 "DIEPMSK,Device IN Endpoint Common Interrupt Mask Register" bitfld.long 0x00 13. " NAKMSK ,NAK interrupt Mask" "Masked,Not masked" bitfld.long 0x00 9. " BNAININTRMSK ,BNA Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 8. " TXFIFOUNDRNMSK ,Fifo Underrun Mask" "Masked,Not masked" bitfld.long 0x00 6. " INEPNAKEFFMSK ,IN Endpoint NAK Effective Mask" "Masked,Not masked" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " INTKNEPMISMSK ,IN Token received with EP Mismatch Interrupt Mask" "Masked,Not masked" textline " " endif bitfld.long 0x00 4. " INTKNTXFEMPMSK ,IN Token Received When TxFIFO Empty Mask" "Masked,Not masked" bitfld.long 0x00 3. " TIMEOUTMSK ,Timeout Condition Mask" "Masked,Not masked" bitfld.long 0x00 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x00 1. " EPDISBLDMSK ,Endpoint Disabled Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 0. " XFERCOMPLMSK ,Transfer Completed Interrupt Mask" "Masked,Not masked" line.long 0x04 "DOEPMSK,Device OUT Endpoint Common Interrupt Mask Register" bitfld.long 0x04 14. " NYETMSK ,NYET Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 13. " NAKMSK ,NAK Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 12. " BBLEERRMSK ,Babble Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 9. " BNAOUTINTRMSK ,BNA interrupt Mask" "Masked,Not masked" bitfld.long 0x04 8. " OUTPKTERRMSK ,OUT Packet Error Mask" "Masked,Not masked" bitfld.long 0x04 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received Mask" "Masked,Not masked" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x04 5. " STSPHSERCVDMSK ,Status Phase Received Mask" "Masked,Not masked" textline " " endif bitfld.long 0x04 4. " OUTTKNEPDISMSK ,OUT Token Received when Endpoint Disabled Mask" "Masked,Not masked" bitfld.long 0x04 3. " SETUPMSK ,SETUP Phase Done Mask" "Masked,Not masked" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error" "Masked,Not masked" textline " " bitfld.long 0x04 1. " EPDISBLDMSK ,Endpoint Disabled Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Interrupt Mask" "Masked,Not masked" rgroup.long 0x0818++0x03 line.long 0x00 "DAINT,Device All Endpoints Interrupt Register" bitfld.long 0x00 31. " OUTEPINT[15] ,OUT Endpoint 15 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 30. " [14] ,OUT Endpoint 14 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 29. " [13] ,OUT Endpoint 13 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 28. " [12] ,OUT Endpoint 12 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 27. " [11] ,OUT Endpoint 11 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 26. " [10] ,OUT Endpoint 10 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 25. " [9] ,OUT Endpoint 9 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 24. " [8] ,OUT Endpoint 8 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 23. " [7] ,OUT Endpoint 7 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 22. " [6] ,OUT Endpoint 6 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 21. " [5] ,OUT Endpoint 5 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 20. " [4] ,OUT Endpoint 4 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 19. " [3] ,OUT Endpoint 3 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 18. " [2] ,OUT Endpoint 2 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 17. " [1] ,OUT Endpoint 1 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 16. " [0] ,OUT Endpoint 0 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 15. " INEPINT[15] ,IN Endpoint 15 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 14. " [14] ,IN Endpoint 14 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 13. " [13] ,IN Endpoint 13 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 12. " [12] ,IN Endpoint 12 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " [11] ,IN Endpoint 11 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 10. " [10] ,IN Endpoint 10 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 9. " [9] ,IN Endpoint 9 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 8. " [8] ,IN Endpoint 8 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " [7] ,IN Endpoint 7 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 6. " [6] ,IN Endpoint 6 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 5. " [5] ,IN Endpoint 5 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 4. " [4] ,IN Endpoint 4 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " [3] ,IN Endpoint 3 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 2. " [2] ,IN Endpoint 2 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 1. " [1] ,IN Endpoint 1 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 0. " [0] ,IN Endpoint 0 Interrupt Bit" "No interrupt,Interrupt" group.long 0x081C++0x03 line.long 0x00 "DAINTMSK,Device All Endpoints Interrupt Mask Register" bitfld.long 0x00 31. " OUTEPMSK[15] ,OUT Endpoint 15 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 30. " [14] ,OUT Endpoint 14 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 29. " [13] ,OUT Endpoint 13 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 28. " [12] ,OUT Endpoint 12 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 27. " [11] ,OUT Endpoint 11 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 26. " [10] ,OUT Endpoint 10 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 25. " [9] ,OUT Endpoint 9 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 24. " [8] ,OUT Endpoint 8 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 23. " [7] ,OUT Endpoint 7 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 22. " [6] ,OUT Endpoint 6 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 21. " [5] ,OUT Endpoint 5 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 20. " [4] ,OUT Endpoint 4 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 19. " [3] ,OUT Endpoint 3 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 18. " [2] ,OUT Endpoint 2 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 17. " [1] ,OUT Endpoint 1 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 16. " [0] ,OUT Endpoint 0 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 15. " INEPMSK[15] ,IN Endpoint 15 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 14. " [14] ,IN Endpoint 14 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 13. " [13] ,IN Endpoint 13 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 12. " [12] ,IN Endpoint 12 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 11. " [11] ,IN Endpoint 11 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 10. " [10] ,IN Endpoint 10 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 9. " [9] ,IN Endpoint 9 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 8. " [8] ,IN Endpoint 8 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 7. " [7] ,IN Endpoint 7 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 6. " [6] ,IN Endpoint 6 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 5. " [5] ,IN Endpoint 5 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 4. " [4] ,IN Endpoint 4 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 3. " [3] ,IN Endpoint 3 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 2. " [2] ,IN Endpoint 2 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 1. " [1] ,IN Endpoint 1 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 0. " [0] ,IN Endpoint 0 Interrupt Mask Bit" "Masked,Not masked" group.long 0x828++0x0F line.long 0x00 "DVBUSDIS,Device VBUS Discharge Time Register" hexmask.long.word 0x00 0.--15. 1. " DVBUSDIS ,Device Vbus Discharge Time" line.long 0x04 "DVBUSPULSE,Device VBUS Pulsing Time Register" hexmask.long.word 0x04 0.--11. 1. " DVBUSPULSE ,Device Vbus Pulsing Time" line.long 0x08 "DTHRCTL,Device Threshold Control Register" bitfld.long 0x08 27. " ARBPRKEN ,Arbiter Parking Enable" "Disabled,Enabled" hexmask.long.word 0x08 17.--25. 1. " RXTHRLEN ,Receive Threshold Length" bitfld.long 0x08 16. " RXTHREN ,Receive Threshold Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 11.--12. " AHBTHRRATIO ,AHB Threshold Ratio" "MAC threshold,MAC threshold/2,MAC threshold/4,MAC threshold/8" hexmask.long.word 0x08 2.--10. 1. " TXTHRLEN ,Transmit Threshold" bitfld.long 0x08 1. " ISOTHREN ,ISO IN Endpoints Threshold Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 0. " NONISOTHREN ,Non-ISO IN Endpoints Threshold Enable" "Disabled,Enabled" line.long 0x0C "DIEPEMPMSK,Device IN Endpoint FIFO Empty Interrupt Mask Register" bitfld.long 0x0C 15. " INEPTXFEMPMSK_[15] ,IN EP 15 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 14. " [14] ,IN EP 14 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 13. " [13] ,IN EP 13 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 12. " [12] ,IN EP 12 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x0C 11. " [11] ,IN EP 11 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 10. " [10] ,IN EP 10 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 9. " [9] ,IN EP 9 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 8. " [8] ,IN EP 8 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x0C 7. " [7] ,IN EP 7 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 6. " [6] ,IN EP 6 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 5. " [5] ,IN EP 5 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 4. " [4] ,IN EP 4 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x0C 3. " [3] ,IN EP 3 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 2. " [2] ,IN EP 2 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 1. " [1] ,IN EP 1 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 0. " [0] ,IN EP 0 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" width 12. group.long 0x900++0x03 "Device IN Endpoint 0" line.long 0x00 "DIEPCTL0,Device Control IN Endpoint 0 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif rbitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,?..." rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" textline " " rbitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" ",Active" bitfld.long 0x00 0.--1. " MPS ,Maximum Packet Size" "64,32,16,8" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x900+0x08)++0x03 line.long 0x00 "DIEPINT0,Device Endpoint-0 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x900+0x08)++0x03 line.long 0x00 "DIEPINT0,Device Endpoint-0 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x900+0x10)++0x03 line.long 0x00 "DIEPTSIZ0,Device Endpoint 0 Transfer Size Register" bitfld.long 0x00 19.--20. " PKTCNT ,Packet Count" "0,1,2,3" hexmask.long.byte 0x00 0.--6. 1. " XFERSIZE ,Transfer Size" group.long (0x900+0x14)++0x03 line.long 0x00 "DIEPDMA0,Device Endpoint-0 DMA Address Register" rgroup.long (0x900+0x18)++0x03 line.long 0x00 "DTXFSTS0,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0x900+0x1C)++0x03 line.long 0x00 "DIEPDMAB0,Device Endpoint-0 DMA Buffer Address Register" else hgroup.long (0x900+0x1C)++0x03 hide.long 0x00 "DIEPDMAB0,Device Endpoint-0 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x920))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0x920))&0xC0000)==0xC0000)) group.long 0x920++0x03 "Device IN Endpoint 1" line.long 0x00 "DIEPCTL1,Device Control IN Endpoint 1 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x920++0x03 "Device IN Endpoint 1" line.long 0x00 "DIEPCTL1,Device Control IN Endpoint 1 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x920+0x08)++0x03 line.long 0x00 "DIEPINT1,Device Endpoint-1 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x920+0x08)++0x03 line.long 0x00 "DIEPINT1,Device Endpoint-1 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x920+0x10)++0x03 line.long 0x00 "DIEPTSIZ1,Device Endpoint-1 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x920+0x14)++0x03 line.long 0x00 "DIEPDMA1,Device Endpoint-1 DMA Address Register" rgroup.long (0x920+0x18)++0x03 line.long 0x00 "DTXFSTS1,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0x920+0x1C)++0x03 line.long 0x00 "DIEPDMAB1,Device Endpoint-1 DMA Buffer Address Register" else hgroup.long (0x920+0x1C)++0x03 hide.long 0x00 "DIEPDMAB1,Device Endpoint-1 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x940))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0x940))&0xC0000)==0xC0000)) group.long 0x940++0x03 "Device IN Endpoint 2" line.long 0x00 "DIEPCTL2,Device Control IN Endpoint 2 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x940++0x03 "Device IN Endpoint 2" line.long 0x00 "DIEPCTL2,Device Control IN Endpoint 2 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x940+0x08)++0x03 line.long 0x00 "DIEPINT2,Device Endpoint-2 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x940+0x08)++0x03 line.long 0x00 "DIEPINT2,Device Endpoint-2 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x940+0x10)++0x03 line.long 0x00 "DIEPTSIZ2,Device Endpoint-2 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x940+0x14)++0x03 line.long 0x00 "DIEPDMA2,Device Endpoint-2 DMA Address Register" rgroup.long (0x940+0x18)++0x03 line.long 0x00 "DTXFSTS2,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0x940+0x1C)++0x03 line.long 0x00 "DIEPDMAB2,Device Endpoint-2 DMA Buffer Address Register" else hgroup.long (0x940+0x1C)++0x03 hide.long 0x00 "DIEPDMAB2,Device Endpoint-2 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x960))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0x960))&0xC0000)==0xC0000)) group.long 0x960++0x03 "Device IN Endpoint 3" line.long 0x00 "DIEPCTL3,Device Control IN Endpoint 3 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x960++0x03 "Device IN Endpoint 3" line.long 0x00 "DIEPCTL3,Device Control IN Endpoint 3 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x960+0x08)++0x03 line.long 0x00 "DIEPINT3,Device Endpoint-3 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x960+0x08)++0x03 line.long 0x00 "DIEPINT3,Device Endpoint-3 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x960+0x10)++0x03 line.long 0x00 "DIEPTSIZ3,Device Endpoint-3 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x960+0x14)++0x03 line.long 0x00 "DIEPDMA3,Device Endpoint-3 DMA Address Register" rgroup.long (0x960+0x18)++0x03 line.long 0x00 "DTXFSTS3,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0x960+0x1C)++0x03 line.long 0x00 "DIEPDMAB3,Device Endpoint-3 DMA Buffer Address Register" else hgroup.long (0x960+0x1C)++0x03 hide.long 0x00 "DIEPDMAB3,Device Endpoint-3 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x980))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0x980))&0xC0000)==0xC0000)) group.long 0x980++0x03 "Device IN Endpoint 4" line.long 0x00 "DIEPCTL4,Device Control IN Endpoint 4 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x980++0x03 "Device IN Endpoint 4" line.long 0x00 "DIEPCTL4,Device Control IN Endpoint 4 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x980+0x08)++0x03 line.long 0x00 "DIEPINT4,Device Endpoint-4 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x980+0x08)++0x03 line.long 0x00 "DIEPINT4,Device Endpoint-4 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x980+0x10)++0x03 line.long 0x00 "DIEPTSIZ4,Device Endpoint-4 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x980+0x14)++0x03 line.long 0x00 "DIEPDMA4,Device Endpoint-4 DMA Address Register" rgroup.long (0x980+0x18)++0x03 line.long 0x00 "DTXFSTS4,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0x980+0x1C)++0x03 line.long 0x00 "DIEPDMAB4,Device Endpoint-4 DMA Buffer Address Register" else hgroup.long (0x980+0x1C)++0x03 hide.long 0x00 "DIEPDMAB4,Device Endpoint-4 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x9A0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0x9A0))&0xC0000)==0xC0000)) group.long 0x9A0++0x03 "Device IN Endpoint 5" line.long 0x00 "DIEPCTL5,Device Control IN Endpoint 5 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x9A0++0x03 "Device IN Endpoint 5" line.long 0x00 "DIEPCTL5,Device Control IN Endpoint 5 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x9A0+0x08)++0x03 line.long 0x00 "DIEPINT5,Device Endpoint-5 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x9A0+0x08)++0x03 line.long 0x00 "DIEPINT5,Device Endpoint-5 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x9A0+0x10)++0x03 line.long 0x00 "DIEPTSIZ5,Device Endpoint-5 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x9A0+0x14)++0x03 line.long 0x00 "DIEPDMA5,Device Endpoint-5 DMA Address Register" rgroup.long (0x9A0+0x18)++0x03 line.long 0x00 "DTXFSTS5,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0x9A0+0x1C)++0x03 line.long 0x00 "DIEPDMAB5,Device Endpoint-5 DMA Buffer Address Register" else hgroup.long (0x9A0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB5,Device Endpoint-5 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x9C0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0x9C0))&0xC0000)==0xC0000)) group.long 0x9C0++0x03 "Device IN Endpoint 6" line.long 0x00 "DIEPCTL6,Device Control IN Endpoint 6 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x9C0++0x03 "Device IN Endpoint 6" line.long 0x00 "DIEPCTL6,Device Control IN Endpoint 6 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x9C0+0x08)++0x03 line.long 0x00 "DIEPINT6,Device Endpoint-6 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x9C0+0x08)++0x03 line.long 0x00 "DIEPINT6,Device Endpoint-6 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x9C0+0x10)++0x03 line.long 0x00 "DIEPTSIZ6,Device Endpoint-6 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x9C0+0x14)++0x03 line.long 0x00 "DIEPDMA6,Device Endpoint-6 DMA Address Register" rgroup.long (0x9C0+0x18)++0x03 line.long 0x00 "DTXFSTS6,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0x9C0+0x1C)++0x03 line.long 0x00 "DIEPDMAB6,Device Endpoint-6 DMA Buffer Address Register" else hgroup.long (0x9C0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB6,Device Endpoint-6 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0x9E0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0x9E0))&0xC0000)==0xC0000)) group.long 0x9E0++0x03 "Device IN Endpoint 7" line.long 0x00 "DIEPCTL7,Device Control IN Endpoint 7 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x9E0++0x03 "Device IN Endpoint 7" line.long 0x00 "DIEPCTL7,Device Control IN Endpoint 7 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0x9E0+0x08)++0x03 line.long 0x00 "DIEPINT7,Device Endpoint-7 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x9E0+0x08)++0x03 line.long 0x00 "DIEPINT7,Device Endpoint-7 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x9E0+0x10)++0x03 line.long 0x00 "DIEPTSIZ7,Device Endpoint-7 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x9E0+0x14)++0x03 line.long 0x00 "DIEPDMA7,Device Endpoint-7 DMA Address Register" rgroup.long (0x9E0+0x18)++0x03 line.long 0x00 "DTXFSTS7,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0x9E0+0x1C)++0x03 line.long 0x00 "DIEPDMAB7,Device Endpoint-7 DMA Buffer Address Register" else hgroup.long (0x9E0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB7,Device Endpoint-7 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xA00))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xA00))&0xC0000)==0xC0000)) group.long 0xA00++0x03 "Device IN Endpoint 8" line.long 0x00 "DIEPCTL8,Device Control IN Endpoint 8 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA00++0x03 "Device IN Endpoint 8" line.long 0x00 "DIEPCTL8,Device Control IN Endpoint 8 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xA00+0x08)++0x03 line.long 0x00 "DIEPINT8,Device Endpoint-8 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA00+0x08)++0x03 line.long 0x00 "DIEPINT8,Device Endpoint-8 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA00+0x10)++0x03 line.long 0x00 "DIEPTSIZ8,Device Endpoint-8 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA00+0x14)++0x03 line.long 0x00 "DIEPDMA8,Device Endpoint-8 DMA Address Register" rgroup.long (0xA00+0x18)++0x03 line.long 0x00 "DTXFSTS8,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA00+0x1C)++0x03 line.long 0x00 "DIEPDMAB8,Device Endpoint-8 DMA Buffer Address Register" else hgroup.long (0xA00+0x1C)++0x03 hide.long 0x00 "DIEPDMAB8,Device Endpoint-8 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xA20))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xA20))&0xC0000)==0xC0000)) group.long 0xA20++0x03 "Device IN Endpoint 9" line.long 0x00 "DIEPCTL9,Device Control IN Endpoint 9 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA20++0x03 "Device IN Endpoint 9" line.long 0x00 "DIEPCTL9,Device Control IN Endpoint 9 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xA20+0x08)++0x03 line.long 0x00 "DIEPINT9,Device Endpoint-9 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA20+0x08)++0x03 line.long 0x00 "DIEPINT9,Device Endpoint-9 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA20+0x10)++0x03 line.long 0x00 "DIEPTSIZ9,Device Endpoint-9 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA20+0x14)++0x03 line.long 0x00 "DIEPDMA9,Device Endpoint-9 DMA Address Register" rgroup.long (0xA20+0x18)++0x03 line.long 0x00 "DTXFSTS9,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA20+0x1C)++0x03 line.long 0x00 "DIEPDMAB9,Device Endpoint-9 DMA Buffer Address Register" else hgroup.long (0xA20+0x1C)++0x03 hide.long 0x00 "DIEPDMAB9,Device Endpoint-9 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xA40))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xA40))&0xC0000)==0xC0000)) group.long 0xA40++0x03 "Device IN Endpoint 10" line.long 0x00 "DIEPCTL10,Device Control IN Endpoint 10 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA40++0x03 "Device IN Endpoint 10" line.long 0x00 "DIEPCTL10,Device Control IN Endpoint 10 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xA40+0x08)++0x03 line.long 0x00 "DIEPINT10,Device Endpoint-10 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA40+0x08)++0x03 line.long 0x00 "DIEPINT10,Device Endpoint-10 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA40+0x10)++0x03 line.long 0x00 "DIEPTSIZ10,Device Endpoint-10 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA40+0x14)++0x03 line.long 0x00 "DIEPDMA10,Device Endpoint-10 DMA Address Register" rgroup.long (0xA40+0x18)++0x03 line.long 0x00 "DTXFSTS10,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA40+0x1C)++0x03 line.long 0x00 "DIEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" else hgroup.long (0xA40+0x1C)++0x03 hide.long 0x00 "DIEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xA60))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xA60))&0xC0000)==0xC0000)) group.long 0xA60++0x03 "Device IN Endpoint 11" line.long 0x00 "DIEPCTL11,Device Control IN Endpoint 11 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA60++0x03 "Device IN Endpoint 11" line.long 0x00 "DIEPCTL11,Device Control IN Endpoint 11 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xA60+0x08)++0x03 line.long 0x00 "DIEPINT11,Device Endpoint-11 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA60+0x08)++0x03 line.long 0x00 "DIEPINT11,Device Endpoint-11 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA60+0x10)++0x03 line.long 0x00 "DIEPTSIZ11,Device Endpoint-11 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA60+0x14)++0x03 line.long 0x00 "DIEPDMA11,Device Endpoint-11 DMA Address Register" rgroup.long (0xA60+0x18)++0x03 line.long 0x00 "DTXFSTS11,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA60+0x1C)++0x03 line.long 0x00 "DIEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" else hgroup.long (0xA60+0x1C)++0x03 hide.long 0x00 "DIEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xA80))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xA80))&0xC0000)==0xC0000)) group.long 0xA80++0x03 "Device IN Endpoint 12" line.long 0x00 "DIEPCTL12,Device Control IN Endpoint 12 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA80++0x03 "Device IN Endpoint 12" line.long 0x00 "DIEPCTL12,Device Control IN Endpoint 12 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xA80+0x08)++0x03 line.long 0x00 "DIEPINT12,Device Endpoint-12 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA80+0x08)++0x03 line.long 0x00 "DIEPINT12,Device Endpoint-12 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA80+0x10)++0x03 line.long 0x00 "DIEPTSIZ12,Device Endpoint-12 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA80+0x14)++0x03 line.long 0x00 "DIEPDMA12,Device Endpoint-12 DMA Address Register" rgroup.long (0xA80+0x18)++0x03 line.long 0x00 "DTXFSTS12,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA80+0x1C)++0x03 line.long 0x00 "DIEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" else hgroup.long (0xA80+0x1C)++0x03 hide.long 0x00 "DIEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xAA0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xAA0))&0xC0000)==0xC0000)) group.long 0xAA0++0x03 "Device IN Endpoint 13" line.long 0x00 "DIEPCTL13,Device Control IN Endpoint 13 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xAA0++0x03 "Device IN Endpoint 13" line.long 0x00 "DIEPCTL13,Device Control IN Endpoint 13 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xAA0+0x08)++0x03 line.long 0x00 "DIEPINT13,Device Endpoint-13 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xAA0+0x08)++0x03 line.long 0x00 "DIEPINT13,Device Endpoint-13 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xAA0+0x10)++0x03 line.long 0x00 "DIEPTSIZ13,Device Endpoint-13 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xAA0+0x14)++0x03 line.long 0x00 "DIEPDMA13,Device Endpoint-13 DMA Address Register" rgroup.long (0xAA0+0x18)++0x03 line.long 0x00 "DTXFSTS13,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xAA0+0x1C)++0x03 line.long 0x00 "DIEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" else hgroup.long (0xAA0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xAC0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xAC0))&0xC0000)==0xC0000)) group.long 0xAC0++0x03 "Device IN Endpoint 14" line.long 0x00 "DIEPCTL14,Device Control IN Endpoint 14 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xAC0++0x03 "Device IN Endpoint 14" line.long 0x00 "DIEPCTL14,Device Control IN Endpoint 14 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xAC0+0x08)++0x03 line.long 0x00 "DIEPINT14,Device Endpoint-14 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xAC0+0x08)++0x03 line.long 0x00 "DIEPINT14,Device Endpoint-14 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xAC0+0x10)++0x03 line.long 0x00 "DIEPTSIZ14,Device Endpoint-14 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xAC0+0x14)++0x03 line.long 0x00 "DIEPDMA14,Device Endpoint-14 DMA Address Register" rgroup.long (0xAC0+0x18)++0x03 line.long 0x00 "DTXFSTS14,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xAC0+0x1C)++0x03 line.long 0x00 "DIEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" else hgroup.long (0xAC0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xAE0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xAE0))&0xC0000)==0xC0000)) group.long 0xAE0++0x03 "Device IN Endpoint 15" line.long 0x00 "DIEPCTL15,Device Control IN Endpoint 15 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xAE0++0x03 "Device IN Endpoint 15" line.long 0x00 "DIEPCTL15,Device Control IN Endpoint 15 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xAE0+0x08)++0x03 line.long 0x00 "DIEPINT15,Device Endpoint-15 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xAE0+0x08)++0x03 line.long 0x00 "DIEPINT15,Device Endpoint-15 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xAE0+0x10)++0x03 line.long 0x00 "DIEPTSIZ15,Device Endpoint-15 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xAE0+0x14)++0x03 line.long 0x00 "DIEPDMA15,Device Endpoint-15 DMA Address Register" rgroup.long (0xAE0+0x18)++0x03 line.long 0x00 "DTXFSTS15,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xAE0+0x1C)++0x03 line.long 0x00 "DIEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" else hgroup.long (0xAE0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" endif group.long 0xB00++0x03 "Device OUT Endpoint 0 " line.long 0x00 "DOEPCTL0,Device Control OUT Endpoint 0 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enabled" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enabled" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" rbitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,?..." textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" ",Active" textline " " rbitfld.long 0x00 0.--1. " MPS ,Maximum Packet Size" "64 bytes,32 bytes,16 bytes,8 bytes" if (((d.l(ad:0xFFB00000+0xB00-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB00+0x08)++0x03 line.long 0x00 "DOEPINT0 ,Device Endpoint-0 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xB00-0x08))&0xC0000)==0x00000) group.long (0xB00+0x08)++0x03 line.long 0x00 "DOEPINT0 ,Device Endpoint-0 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB00+0x08)++0x03 line.long 0x00 "DOEPINT0 ,Device Endpoint-0 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB00+0x08)++0x03 line.long 0x00 "DOEPINT0 ,Device Endpoint-0 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB00+0x10)++0x03 line.long 0x00 "DOEPTSIZ0,Device Endpoint 0 Transfer Size Register" bitfld.long 0x00 29.--30. " SUPCNT ,SETUP Packet Count" ",1,2,3" bitfld.long 0x00 19. " PKTCNT ,Packet Count" "0,1" hexmask.long.byte 0x00 0.--6. 1. " XFERSIZE ,Transfer Size" group.long (0xB00+0x14)++0x03 line.long 0x00 "DOEPDMA0 ,Device Endpoint-0 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB00+0x1C)++0x03 line.long 0x00 "DOEPDMAB0 ,Device Endpoint-0 DMA Buffer Address Register" else hgroup.long (0xB00+0x1C)++0x03 hide.long 0x00 "DOEPDMAB0 ,Device Endpoint-0 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xB20))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xB20))&0xC0000)==0xC0000)) group.long 0xB20++0x03 "Device OUT Endpoint 1 " line.long 0x00 "DOEPCTL1 ,Device Control OUT Endpoint 1 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xB20++0x03 "Device OUT Endpoint 1 " line.long 0x00 "DOEPCTL1 ,Device Endpoint-1 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xB20-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB20+0x08)++0x03 line.long 0x00 "DOEPINT1 ,Device Endpoint-1 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xB20-0x08))&0xC0000)==0x00000) group.long (0xB20+0x08)++0x03 line.long 0x00 "DOEPINT1 ,Device Endpoint-1 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB20+0x08)++0x03 line.long 0x00 "DOEPINT1 ,Device Endpoint-1 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB20+0x08)++0x03 line.long 0x00 "DOEPINT1 ,Device Endpoint-1 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB20+0x10)++0x03 line.long 0x00 "DOEPTSIZ1 ,Device Endpoint-1 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xB20+0x14)++0x03 line.long 0x00 "DOEPDMA1 ,Device Endpoint-1 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB20+0x1C)++0x03 line.long 0x00 "DOEPDMAB1 ,Device Endpoint-1 DMA Buffer Address Register" else hgroup.long (0xB20+0x1C)++0x03 hide.long 0x00 "DOEPDMAB1 ,Device Endpoint-1 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xB40))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xB40))&0xC0000)==0xC0000)) group.long 0xB40++0x03 "Device OUT Endpoint 2 " line.long 0x00 "DOEPCTL2 ,Device Control OUT Endpoint 2 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xB40++0x03 "Device OUT Endpoint 2 " line.long 0x00 "DOEPCTL2 ,Device Endpoint-2 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xB40-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB40+0x08)++0x03 line.long 0x00 "DOEPINT2 ,Device Endpoint-2 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xB40-0x08))&0xC0000)==0x00000) group.long (0xB40+0x08)++0x03 line.long 0x00 "DOEPINT2 ,Device Endpoint-2 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB40+0x08)++0x03 line.long 0x00 "DOEPINT2 ,Device Endpoint-2 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB40+0x08)++0x03 line.long 0x00 "DOEPINT2 ,Device Endpoint-2 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB40+0x10)++0x03 line.long 0x00 "DOEPTSIZ2 ,Device Endpoint-2 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xB40+0x14)++0x03 line.long 0x00 "DOEPDMA2 ,Device Endpoint-2 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB40+0x1C)++0x03 line.long 0x00 "DOEPDMAB2 ,Device Endpoint-2 DMA Buffer Address Register" else hgroup.long (0xB40+0x1C)++0x03 hide.long 0x00 "DOEPDMAB2 ,Device Endpoint-2 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xB60))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xB60))&0xC0000)==0xC0000)) group.long 0xB60++0x03 "Device OUT Endpoint 3 " line.long 0x00 "DOEPCTL3 ,Device Control OUT Endpoint 3 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xB60++0x03 "Device OUT Endpoint 3 " line.long 0x00 "DOEPCTL3 ,Device Endpoint-3 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xB60-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB60+0x08)++0x03 line.long 0x00 "DOEPINT3 ,Device Endpoint-3 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xB60-0x08))&0xC0000)==0x00000) group.long (0xB60+0x08)++0x03 line.long 0x00 "DOEPINT3 ,Device Endpoint-3 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB60+0x08)++0x03 line.long 0x00 "DOEPINT3 ,Device Endpoint-3 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB60+0x08)++0x03 line.long 0x00 "DOEPINT3 ,Device Endpoint-3 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB60+0x10)++0x03 line.long 0x00 "DOEPTSIZ3 ,Device Endpoint-3 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xB60+0x14)++0x03 line.long 0x00 "DOEPDMA3 ,Device Endpoint-3 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB60+0x1C)++0x03 line.long 0x00 "DOEPDMAB3 ,Device Endpoint-3 DMA Buffer Address Register" else hgroup.long (0xB60+0x1C)++0x03 hide.long 0x00 "DOEPDMAB3 ,Device Endpoint-3 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xB80))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xB80))&0xC0000)==0xC0000)) group.long 0xB80++0x03 "Device OUT Endpoint 4 " line.long 0x00 "DOEPCTL4 ,Device Control OUT Endpoint 4 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xB80++0x03 "Device OUT Endpoint 4 " line.long 0x00 "DOEPCTL4 ,Device Endpoint-4 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xB80-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB80+0x08)++0x03 line.long 0x00 "DOEPINT4 ,Device Endpoint-4 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xB80-0x08))&0xC0000)==0x00000) group.long (0xB80+0x08)++0x03 line.long 0x00 "DOEPINT4 ,Device Endpoint-4 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xB80+0x08)++0x03 line.long 0x00 "DOEPINT4 ,Device Endpoint-4 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB80+0x08)++0x03 line.long 0x00 "DOEPINT4 ,Device Endpoint-4 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB80+0x10)++0x03 line.long 0x00 "DOEPTSIZ4 ,Device Endpoint-4 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xB80+0x14)++0x03 line.long 0x00 "DOEPDMA4 ,Device Endpoint-4 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB80+0x1C)++0x03 line.long 0x00 "DOEPDMAB4 ,Device Endpoint-4 DMA Buffer Address Register" else hgroup.long (0xB80+0x1C)++0x03 hide.long 0x00 "DOEPDMAB4 ,Device Endpoint-4 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xBA0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xBA0))&0xC0000)==0xC0000)) group.long 0xBA0++0x03 "Device OUT Endpoint 5 " line.long 0x00 "DOEPCTL5 ,Device Control OUT Endpoint 5 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xBA0++0x03 "Device OUT Endpoint 5 " line.long 0x00 "DOEPCTL5 ,Device Endpoint-5 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xBA0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xBA0+0x08)++0x03 line.long 0x00 "DOEPINT5 ,Device Endpoint-5 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xBA0-0x08))&0xC0000)==0x00000) group.long (0xBA0+0x08)++0x03 line.long 0x00 "DOEPINT5 ,Device Endpoint-5 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xBA0+0x08)++0x03 line.long 0x00 "DOEPINT5 ,Device Endpoint-5 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xBA0+0x08)++0x03 line.long 0x00 "DOEPINT5 ,Device Endpoint-5 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xBA0+0x10)++0x03 line.long 0x00 "DOEPTSIZ5 ,Device Endpoint-5 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xBA0+0x14)++0x03 line.long 0x00 "DOEPDMA5 ,Device Endpoint-5 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xBA0+0x1C)++0x03 line.long 0x00 "DOEPDMAB5 ,Device Endpoint-5 DMA Buffer Address Register" else hgroup.long (0xBA0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB5 ,Device Endpoint-5 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xBC0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xBC0))&0xC0000)==0xC0000)) group.long 0xBC0++0x03 "Device OUT Endpoint 6 " line.long 0x00 "DOEPCTL6 ,Device Control OUT Endpoint 6 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xBC0++0x03 "Device OUT Endpoint 6 " line.long 0x00 "DOEPCTL6 ,Device Endpoint-6 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xBC0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xBC0+0x08)++0x03 line.long 0x00 "DOEPINT6 ,Device Endpoint-6 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xBC0-0x08))&0xC0000)==0x00000) group.long (0xBC0+0x08)++0x03 line.long 0x00 "DOEPINT6 ,Device Endpoint-6 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xBC0+0x08)++0x03 line.long 0x00 "DOEPINT6 ,Device Endpoint-6 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xBC0+0x08)++0x03 line.long 0x00 "DOEPINT6 ,Device Endpoint-6 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xBC0+0x10)++0x03 line.long 0x00 "DOEPTSIZ6 ,Device Endpoint-6 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xBC0+0x14)++0x03 line.long 0x00 "DOEPDMA6 ,Device Endpoint-6 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xBC0+0x1C)++0x03 line.long 0x00 "DOEPDMAB6 ,Device Endpoint-6 DMA Buffer Address Register" else hgroup.long (0xBC0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB6 ,Device Endpoint-6 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xBE0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xBE0))&0xC0000)==0xC0000)) group.long 0xBE0++0x03 "Device OUT Endpoint 7 " line.long 0x00 "DOEPCTL7 ,Device Control OUT Endpoint 7 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xBE0++0x03 "Device OUT Endpoint 7 " line.long 0x00 "DOEPCTL7 ,Device Endpoint-7 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xBE0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xBE0+0x08)++0x03 line.long 0x00 "DOEPINT7 ,Device Endpoint-7 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xBE0-0x08))&0xC0000)==0x00000) group.long (0xBE0+0x08)++0x03 line.long 0x00 "DOEPINT7 ,Device Endpoint-7 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xBE0+0x08)++0x03 line.long 0x00 "DOEPINT7 ,Device Endpoint-7 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xBE0+0x08)++0x03 line.long 0x00 "DOEPINT7 ,Device Endpoint-7 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xBE0+0x10)++0x03 line.long 0x00 "DOEPTSIZ7 ,Device Endpoint-7 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xBE0+0x14)++0x03 line.long 0x00 "DOEPDMA7 ,Device Endpoint-7 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xBE0+0x1C)++0x03 line.long 0x00 "DOEPDMAB7 ,Device Endpoint-7 DMA Buffer Address Register" else hgroup.long (0xBE0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB7 ,Device Endpoint-7 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xC00))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xC00))&0xC0000)==0xC0000)) group.long 0xC00++0x03 "Device OUT Endpoint 8 " line.long 0x00 "DOEPCTL8 ,Device Control OUT Endpoint 8 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC00++0x03 "Device OUT Endpoint 8 " line.long 0x00 "DOEPCTL8 ,Device Endpoint-8 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xC00-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC00+0x08)++0x03 line.long 0x00 "DOEPINT8 ,Device Endpoint-8 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xC00-0x08))&0xC0000)==0x00000) group.long (0xC00+0x08)++0x03 line.long 0x00 "DOEPINT8 ,Device Endpoint-8 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC00+0x08)++0x03 line.long 0x00 "DOEPINT8 ,Device Endpoint-8 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC00+0x08)++0x03 line.long 0x00 "DOEPINT8 ,Device Endpoint-8 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC00+0x10)++0x03 line.long 0x00 "DOEPTSIZ8 ,Device Endpoint-8 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC00+0x14)++0x03 line.long 0x00 "DOEPDMA8 ,Device Endpoint-8 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC00+0x1C)++0x03 line.long 0x00 "DOEPDMAB8 ,Device Endpoint-8 DMA Buffer Address Register" else hgroup.long (0xC00+0x1C)++0x03 hide.long 0x00 "DOEPDMAB8 ,Device Endpoint-8 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xC20))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xC20))&0xC0000)==0xC0000)) group.long 0xC20++0x03 "Device OUT Endpoint 9 " line.long 0x00 "DOEPCTL9 ,Device Control OUT Endpoint 9 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC20++0x03 "Device OUT Endpoint 9 " line.long 0x00 "DOEPCTL9 ,Device Endpoint-9 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xC20-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC20+0x08)++0x03 line.long 0x00 "DOEPINT9 ,Device Endpoint-9 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xC20-0x08))&0xC0000)==0x00000) group.long (0xC20+0x08)++0x03 line.long 0x00 "DOEPINT9 ,Device Endpoint-9 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC20+0x08)++0x03 line.long 0x00 "DOEPINT9 ,Device Endpoint-9 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC20+0x08)++0x03 line.long 0x00 "DOEPINT9 ,Device Endpoint-9 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC20+0x10)++0x03 line.long 0x00 "DOEPTSIZ9 ,Device Endpoint-9 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC20+0x14)++0x03 line.long 0x00 "DOEPDMA9 ,Device Endpoint-9 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC20+0x1C)++0x03 line.long 0x00 "DOEPDMAB9 ,Device Endpoint-9 DMA Buffer Address Register" else hgroup.long (0xC20+0x1C)++0x03 hide.long 0x00 "DOEPDMAB9 ,Device Endpoint-9 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xC40))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xC40))&0xC0000)==0xC0000)) group.long 0xC40++0x03 "Device OUT Endpoint 10" line.long 0x00 "DOEPCTL10,Device Control OUT Endpoint 10 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC40++0x03 "Device OUT Endpoint 10" line.long 0x00 "DOEPCTL10,Device Endpoint-10 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xC40-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC40+0x08)++0x03 line.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xC40-0x08))&0xC0000)==0x00000) group.long (0xC40+0x08)++0x03 line.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC40+0x08)++0x03 line.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC40+0x08)++0x03 line.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC40+0x10)++0x03 line.long 0x00 "DOEPTSIZ10,Device Endpoint-10 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC40+0x14)++0x03 line.long 0x00 "DOEPDMA10,Device Endpoint-10 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC40+0x1C)++0x03 line.long 0x00 "DOEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" else hgroup.long (0xC40+0x1C)++0x03 hide.long 0x00 "DOEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xC60))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xC60))&0xC0000)==0xC0000)) group.long 0xC60++0x03 "Device OUT Endpoint 11" line.long 0x00 "DOEPCTL11,Device Control OUT Endpoint 11 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC60++0x03 "Device OUT Endpoint 11" line.long 0x00 "DOEPCTL11,Device Endpoint-11 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xC60-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC60+0x08)++0x03 line.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xC60-0x08))&0xC0000)==0x00000) group.long (0xC60+0x08)++0x03 line.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC60+0x08)++0x03 line.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC60+0x08)++0x03 line.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC60+0x10)++0x03 line.long 0x00 "DOEPTSIZ11,Device Endpoint-11 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC60+0x14)++0x03 line.long 0x00 "DOEPDMA11,Device Endpoint-11 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC60+0x1C)++0x03 line.long 0x00 "DOEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" else hgroup.long (0xC60+0x1C)++0x03 hide.long 0x00 "DOEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xC80))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xC80))&0xC0000)==0xC0000)) group.long 0xC80++0x03 "Device OUT Endpoint 12" line.long 0x00 "DOEPCTL12,Device Control OUT Endpoint 12 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC80++0x03 "Device OUT Endpoint 12" line.long 0x00 "DOEPCTL12,Device Endpoint-12 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xC80-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC80+0x08)++0x03 line.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xC80-0x08))&0xC0000)==0x00000) group.long (0xC80+0x08)++0x03 line.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xC80+0x08)++0x03 line.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC80+0x08)++0x03 line.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC80+0x10)++0x03 line.long 0x00 "DOEPTSIZ12,Device Endpoint-12 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC80+0x14)++0x03 line.long 0x00 "DOEPDMA12,Device Endpoint-12 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC80+0x1C)++0x03 line.long 0x00 "DOEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" else hgroup.long (0xC80+0x1C)++0x03 hide.long 0x00 "DOEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xCA0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xCA0))&0xC0000)==0xC0000)) group.long 0xCA0++0x03 "Device OUT Endpoint 13" line.long 0x00 "DOEPCTL13,Device Control OUT Endpoint 13 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xCA0++0x03 "Device OUT Endpoint 13" line.long 0x00 "DOEPCTL13,Device Endpoint-13 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xCA0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xCA0+0x08)++0x03 line.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xCA0-0x08))&0xC0000)==0x00000) group.long (0xCA0+0x08)++0x03 line.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xCA0+0x08)++0x03 line.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xCA0+0x08)++0x03 line.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xCA0+0x10)++0x03 line.long 0x00 "DOEPTSIZ13,Device Endpoint-13 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xCA0+0x14)++0x03 line.long 0x00 "DOEPDMA13,Device Endpoint-13 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xCA0+0x1C)++0x03 line.long 0x00 "DOEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" else hgroup.long (0xCA0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xCC0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xCC0))&0xC0000)==0xC0000)) group.long 0xCC0++0x03 "Device OUT Endpoint 14" line.long 0x00 "DOEPCTL14,Device Control OUT Endpoint 14 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xCC0++0x03 "Device OUT Endpoint 14" line.long 0x00 "DOEPCTL14,Device Endpoint-14 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xCC0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xCC0+0x08)++0x03 line.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xCC0-0x08))&0xC0000)==0x00000) group.long (0xCC0+0x08)++0x03 line.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xCC0+0x08)++0x03 line.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xCC0+0x08)++0x03 line.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xCC0+0x10)++0x03 line.long 0x00 "DOEPTSIZ14,Device Endpoint-14 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xCC0+0x14)++0x03 line.long 0x00 "DOEPDMA14,Device Endpoint-14 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xCC0+0x1C)++0x03 line.long 0x00 "DOEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" else hgroup.long (0xCC0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB00000+0xCE0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB00000+0xCE0))&0xC0000)==0xC0000)) group.long 0xCE0++0x03 "Device OUT Endpoint 15" line.long 0x00 "DOEPCTL15,Device Control OUT Endpoint 15 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xCE0++0x03 "Device OUT Endpoint 15" line.long 0x00 "DOEPCTL15,Device Endpoint-15 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB00000+0xCE0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xCE0+0x08)++0x03 line.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB00000+0xCE0-0x08))&0xC0000)==0x00000) group.long (0xCE0+0x08)++0x03 line.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) group.long (0xCE0+0x08)++0x03 line.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xCE0+0x08)++0x03 line.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xCE0+0x10)++0x03 line.long 0x00 "DOEPTSIZ15,Device Endpoint-15 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xCE0+0x14)++0x03 line.long 0x00 "DOEPDMA15,Device Endpoint-15 DMA Address Register" if ((((d.l(ad:0xFFB00000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB00000+0x0400))&0x800000)==0x800000)) rgroup.long (0xCE0+0x1C)++0x03 line.long 0x00 "DOEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" else hgroup.long (0xCE0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" endif else hgroup.long 0x0800++0x07 hide.long 0x00 "DCFG,Device Configuration Register" hide.long 0x04 "DCTL,Device Control Register" hgroup.long 0x0808++0x03 hide.long 0x00 "DSTS,Device Status Register" hgroup.long 0x0810++0x07 hide.long 0x00 "DIEPMSK,Device IN Endpoint Common Interrupt Mask Register" hide.long 0x04 "DOEPMSK,Device OUT Endpoint Common Interrupt Mask Register" hgroup.long 0x0818++0x03 hide.long 0x00 "DAINT,Device All Endpoints Interrupt Register" hgroup.long 0x081C++0x03 hide.long 0x00 "DAINT,Device All Endpoints Interrupt Register" hgroup.long 0x0828++0x07 hide.long 0x00 "DVBUSDIS,Device VBUS Discharge Time Register" hide.long 0x04 "DVBUSPULSE,Device VBUS Pulsing Time Register" hgroup.long 0x0834++0x03 hide.long 0x00 "DIEPEMPMSK,Device IN Endpoint FIFO Empty Interrupt Mask Register" hgroup.long 0x900++0x03 "Device IN Endpoint 0" hide.long 0x00 "DIEPCTL0,Device Control IN Endpoint 0 Control Register" hgroup.long (0x900+0x08)++0x03 hide.long 0x00 "DIEPINT0,Device Endpoint-0 Interrupt Register" hgroup.long 0x0910++0x03 hide.long 0x00 "DIEPTSIZ0,Device Endpoint 0 Transfer Size Register" hgroup.long (0x900+0x14)++0x03 hide.long 0x00 "DIEPDMA0,Device Endpoint-0 DMA Address Register" hgroup.long (0x900+0x18)++0x07 hide.long 0x00 "DTXFSTS0,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB0,Device Endpoint-0 DMA Buffer Address Register" hgroup.long 0x920++0x03 "Device IN Endpoint 1" hide.long 0x00 "DIEPCTL1,Device Endpoint 1 Control Regist" hgroup.long (0x920+0x08)++0x03 hide.long 0x00 "DIEPINT1,Device Endpoint-1 Interrupt Register" hgroup.long (0x920+0x10)++0x03 hide.long 0x00 "DIEPTSIZ1,Device Endpoint-1 Transfer Size Register" hgroup.long (0x920+0x14)++0x03 hide.long 0x00 "DIEPDMA1,Device Endpoint-1 DMA Address Register" hgroup.long (0x920+0x18)++0x07 hide.long 0x00 "DTXFSTS1,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB1,Device Endpoint-1 DMA Buffer Address Register" hgroup.long 0x940++0x03 "Device IN Endpoint 2" hide.long 0x00 "DIEPCTL2,Device Endpoint 2 Control Regist" hgroup.long (0x940+0x08)++0x03 hide.long 0x00 "DIEPINT2,Device Endpoint-2 Interrupt Register" hgroup.long (0x940+0x10)++0x03 hide.long 0x00 "DIEPTSIZ2,Device Endpoint-2 Transfer Size Register" hgroup.long (0x940+0x14)++0x03 hide.long 0x00 "DIEPDMA2,Device Endpoint-2 DMA Address Register" hgroup.long (0x940+0x18)++0x07 hide.long 0x00 "DTXFSTS2,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB2,Device Endpoint-2 DMA Buffer Address Register" hgroup.long 0x960++0x03 "Device IN Endpoint 3" hide.long 0x00 "DIEPCTL3,Device Endpoint 3 Control Regist" hgroup.long (0x960+0x08)++0x03 hide.long 0x00 "DIEPINT3,Device Endpoint-3 Interrupt Register" hgroup.long (0x960+0x10)++0x03 hide.long 0x00 "DIEPTSIZ3,Device Endpoint-3 Transfer Size Register" hgroup.long (0x960+0x14)++0x03 hide.long 0x00 "DIEPDMA3,Device Endpoint-3 DMA Address Register" hgroup.long (0x960+0x18)++0x07 hide.long 0x00 "DTXFSTS3,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB3,Device Endpoint-3 DMA Buffer Address Register" hgroup.long 0x980++0x03 "Device IN Endpoint 4" hide.long 0x00 "DIEPCTL4,Device Endpoint 4 Control Regist" hgroup.long (0x980+0x08)++0x03 hide.long 0x00 "DIEPINT4,Device Endpoint-4 Interrupt Register" hgroup.long (0x980+0x10)++0x03 hide.long 0x00 "DIEPTSIZ4,Device Endpoint-4 Transfer Size Register" hgroup.long (0x980+0x14)++0x03 hide.long 0x00 "DIEPDMA4,Device Endpoint-4 DMA Address Register" hgroup.long (0x980+0x18)++0x07 hide.long 0x00 "DTXFSTS4,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB4,Device Endpoint-4 DMA Buffer Address Register" hgroup.long 0x9A0++0x03 "Device IN Endpoint 5" hide.long 0x00 "DIEPCTL5,Device Endpoint 5 Control Regist" hgroup.long (0x9A0+0x08)++0x03 hide.long 0x00 "DIEPINT5,Device Endpoint-5 Interrupt Register" hgroup.long (0x9A0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ5,Device Endpoint-5 Transfer Size Register" hgroup.long (0x9A0+0x14)++0x03 hide.long 0x00 "DIEPDMA5,Device Endpoint-5 DMA Address Register" hgroup.long (0x9A0+0x18)++0x07 hide.long 0x00 "DTXFSTS5,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB5,Device Endpoint-5 DMA Buffer Address Register" hgroup.long 0x9C0++0x03 "Device IN Endpoint 6" hide.long 0x00 "DIEPCTL6,Device Endpoint 6 Control Regist" hgroup.long (0x9C0+0x08)++0x03 hide.long 0x00 "DIEPINT6,Device Endpoint-6 Interrupt Register" hgroup.long (0x9C0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ6,Device Endpoint-6 Transfer Size Register" hgroup.long (0x9C0+0x14)++0x03 hide.long 0x00 "DIEPDMA6,Device Endpoint-6 DMA Address Register" hgroup.long (0x9C0+0x18)++0x07 hide.long 0x00 "DTXFSTS6,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB6,Device Endpoint-6 DMA Buffer Address Register" hgroup.long 0x9E0++0x03 "Device IN Endpoint 7" hide.long 0x00 "DIEPCTL7,Device Endpoint 7 Control Regist" hgroup.long (0x9E0+0x08)++0x03 hide.long 0x00 "DIEPINT7,Device Endpoint-7 Interrupt Register" hgroup.long (0x9E0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ7,Device Endpoint-7 Transfer Size Register" hgroup.long (0x9E0+0x14)++0x03 hide.long 0x00 "DIEPDMA7,Device Endpoint-7 DMA Address Register" hgroup.long (0x9E0+0x18)++0x07 hide.long 0x00 "DTXFSTS7,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB7,Device Endpoint-7 DMA Buffer Address Register" hgroup.long 0xA00++0x03 "Device IN Endpoint 8" hide.long 0x00 "DIEPCTL8,Device Endpoint 8 Control Regist" hgroup.long (0xA00+0x08)++0x03 hide.long 0x00 "DIEPINT8,Device Endpoint-8 Interrupt Register" hgroup.long (0xA00+0x10)++0x03 hide.long 0x00 "DIEPTSIZ8,Device Endpoint-8 Transfer Size Register" hgroup.long (0xA00+0x14)++0x03 hide.long 0x00 "DIEPDMA8,Device Endpoint-8 DMA Address Register" hgroup.long (0xA00+0x18)++0x07 hide.long 0x00 "DTXFSTS8,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB8,Device Endpoint-8 DMA Buffer Address Register" hgroup.long 0xA20++0x03 "Device IN Endpoint 9" hide.long 0x00 "DIEPCTL9,Device Endpoint 9 Control Regist" hgroup.long (0xA20+0x08)++0x03 hide.long 0x00 "DIEPINT9,Device Endpoint-9 Interrupt Register" hgroup.long (0xA20+0x10)++0x03 hide.long 0x00 "DIEPTSIZ9,Device Endpoint-9 Transfer Size Register" hgroup.long (0xA20+0x14)++0x03 hide.long 0x00 "DIEPDMA9,Device Endpoint-9 DMA Address Register" hgroup.long (0xA20+0x18)++0x07 hide.long 0x00 "DTXFSTS9,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB9,Device Endpoint-9 DMA Buffer Address Register" hgroup.long 0xA40++0x03 "Device IN Endpoint 10" hide.long 0x00 "DIEPCTL10,Device Endpoint 10 Control Regist" hgroup.long (0xA40+0x08)++0x03 hide.long 0x00 "DIEPINT10,Device Endpoint-10 Interrupt Register" hgroup.long (0xA40+0x10)++0x03 hide.long 0x00 "DIEPTSIZ10,Device Endpoint-10 Transfer Size Register" hgroup.long (0xA40+0x14)++0x03 hide.long 0x00 "DIEPDMA10,Device Endpoint-10 DMA Address Register" hgroup.long (0xA40+0x18)++0x07 hide.long 0x00 "DTXFSTS10,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" hgroup.long 0xA60++0x03 "Device IN Endpoint 11" hide.long 0x00 "DIEPCTL11,Device Endpoint 11 Control Regist" hgroup.long (0xA60+0x08)++0x03 hide.long 0x00 "DIEPINT11,Device Endpoint-11 Interrupt Register" hgroup.long (0xA60+0x10)++0x03 hide.long 0x00 "DIEPTSIZ11,Device Endpoint-11 Transfer Size Register" hgroup.long (0xA60+0x14)++0x03 hide.long 0x00 "DIEPDMA11,Device Endpoint-11 DMA Address Register" hgroup.long (0xA60+0x18)++0x07 hide.long 0x00 "DTXFSTS11,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" hgroup.long 0xA80++0x03 "Device IN Endpoint 12" hide.long 0x00 "DIEPCTL12,Device Endpoint 12 Control Regist" hgroup.long (0xA80+0x08)++0x03 hide.long 0x00 "DIEPINT12,Device Endpoint-12 Interrupt Register" hgroup.long (0xA80+0x10)++0x03 hide.long 0x00 "DIEPTSIZ12,Device Endpoint-12 Transfer Size Register" hgroup.long (0xA80+0x14)++0x03 hide.long 0x00 "DIEPDMA12,Device Endpoint-12 DMA Address Register" hgroup.long (0xA80+0x18)++0x07 hide.long 0x00 "DTXFSTS12,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" hgroup.long 0xAA0++0x03 "Device IN Endpoint 13" hide.long 0x00 "DIEPCTL13,Device Endpoint 13 Control Regist" hgroup.long (0xAA0+0x08)++0x03 hide.long 0x00 "DIEPINT13,Device Endpoint-13 Interrupt Register" hgroup.long (0xAA0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ13,Device Endpoint-13 Transfer Size Register" hgroup.long (0xAA0+0x14)++0x03 hide.long 0x00 "DIEPDMA13,Device Endpoint-13 DMA Address Register" hgroup.long (0xAA0+0x18)++0x07 hide.long 0x00 "DTXFSTS13,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" hgroup.long 0xAC0++0x03 "Device IN Endpoint 14" hide.long 0x00 "DIEPCTL14,Device Endpoint 14 Control Regist" hgroup.long (0xAC0+0x08)++0x03 hide.long 0x00 "DIEPINT14,Device Endpoint-14 Interrupt Register" hgroup.long (0xAC0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ14,Device Endpoint-14 Transfer Size Register" hgroup.long (0xAC0+0x14)++0x03 hide.long 0x00 "DIEPDMA14,Device Endpoint-14 DMA Address Register" hgroup.long (0xAC0+0x18)++0x07 hide.long 0x00 "DTXFSTS14,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" hgroup.long 0xAE0++0x03 "Device IN Endpoint 15" hide.long 0x00 "DIEPCTL15,Device Endpoint 15 Control Regist" hgroup.long (0xAE0+0x08)++0x03 hide.long 0x00 "DIEPINT15,Device Endpoint-15 Interrupt Register" hgroup.long (0xAE0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ15,Device Endpoint-15 Transfer Size Register" hgroup.long (0xAE0+0x14)++0x03 hide.long 0x00 "DIEPDMA15,Device Endpoint-15 DMA Address Register" hgroup.long (0xAE0+0x18)++0x07 hide.long 0x00 "DTXFSTS15,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" hgroup.long 0xB00++0x03 "Device OUT Endpoint 0" hide.long 0x00 "DOEPCTL0,Device Control OUT Endpoint 0 Control Register" hgroup.long (0xB00+0x08)++0x03 hide.long 0x00 "DOEPINT0,Device Endpoint-0 Interrupt Register" hgroup.long (0xB00+0x10)++0x03 hide.long 0x00 "DOEPTSIZ0,Device Endpoint 0 Transfer Size Register" hgroup.long (0xB00+0x14)++0x03 hide.long 0x00 "DOEPDMA0,Device Endpoint-0 DMA Address Register" hgroup.long (0xB00+0x1C)++0x03 hide.long 0x00 "DOEPDMAB0,Device Endpoint-0 DMA Buffer Address Register" hgroup.long 0xB20++0x03 "Device OUT Endpoint 1" hide.long 0x00 "DOEPCTL1,Device Endpoint-1 Control Register" hgroup.long (0xB20+0x08)++0x03 hide.long 0x00 "DOEPINT1,Device Endpoint-1 Interrupt Register" hgroup.long (0xB20+0x10)++0x03 hide.long 0x00 "DOEPTSIZ1,Device Endpoint-1 Transfer Size Register" hgroup.long (0xB20+0x14)++0x03 hide.long 0x00 "DOEPDMA1,Device Endpoint-1 DMA Address Register" hgroup.long (0xB20+0x1C)++0x03 hide.long 0x00 "DOEPDMAB1,Device Endpoint-1 DMA Buffer Address Register" hgroup.long 0xB40++0x03 "Device OUT Endpoint 2" hide.long 0x00 "DOEPCTL2,Device Endpoint-2 Control Register" hgroup.long (0xB40+0x08)++0x03 hide.long 0x00 "DOEPINT2,Device Endpoint-2 Interrupt Register" hgroup.long (0xB40+0x10)++0x03 hide.long 0x00 "DOEPTSIZ2,Device Endpoint-2 Transfer Size Register" hgroup.long (0xB40+0x14)++0x03 hide.long 0x00 "DOEPDMA2,Device Endpoint-2 DMA Address Register" hgroup.long (0xB40+0x1C)++0x03 hide.long 0x00 "DOEPDMAB2,Device Endpoint-2 DMA Buffer Address Register" hgroup.long 0xB60++0x03 "Device OUT Endpoint 3" hide.long 0x00 "DOEPCTL3,Device Endpoint-3 Control Register" hgroup.long (0xB60+0x08)++0x03 hide.long 0x00 "DOEPINT3,Device Endpoint-3 Interrupt Register" hgroup.long (0xB60+0x10)++0x03 hide.long 0x00 "DOEPTSIZ3,Device Endpoint-3 Transfer Size Register" hgroup.long (0xB60+0x14)++0x03 hide.long 0x00 "DOEPDMA3,Device Endpoint-3 DMA Address Register" hgroup.long (0xB60+0x1C)++0x03 hide.long 0x00 "DOEPDMAB3,Device Endpoint-3 DMA Buffer Address Register" hgroup.long 0xB80++0x03 "Device OUT Endpoint 4" hide.long 0x00 "DOEPCTL4,Device Endpoint-4 Control Register" hgroup.long (0xB80+0x08)++0x03 hide.long 0x00 "DOEPINT4,Device Endpoint-4 Interrupt Register" hgroup.long (0xB80+0x10)++0x03 hide.long 0x00 "DOEPTSIZ4,Device Endpoint-4 Transfer Size Register" hgroup.long (0xB80+0x14)++0x03 hide.long 0x00 "DOEPDMA4,Device Endpoint-4 DMA Address Register" hgroup.long (0xB80+0x1C)++0x03 hide.long 0x00 "DOEPDMAB4,Device Endpoint-4 DMA Buffer Address Register" hgroup.long 0xBA0++0x03 "Device OUT Endpoint 5" hide.long 0x00 "DOEPCTL5,Device Endpoint-5 Control Register" hgroup.long (0xBA0+0x08)++0x03 hide.long 0x00 "DOEPINT5,Device Endpoint-5 Interrupt Register" hgroup.long (0xBA0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ5,Device Endpoint-5 Transfer Size Register" hgroup.long (0xBA0+0x14)++0x03 hide.long 0x00 "DOEPDMA5,Device Endpoint-5 DMA Address Register" hgroup.long (0xBA0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB5,Device Endpoint-5 DMA Buffer Address Register" hgroup.long 0xBC0++0x03 "Device OUT Endpoint 6" hide.long 0x00 "DOEPCTL6,Device Endpoint-6 Control Register" hgroup.long (0xBC0+0x08)++0x03 hide.long 0x00 "DOEPINT6,Device Endpoint-6 Interrupt Register" hgroup.long (0xBC0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ6,Device Endpoint-6 Transfer Size Register" hgroup.long (0xBC0+0x14)++0x03 hide.long 0x00 "DOEPDMA6,Device Endpoint-6 DMA Address Register" hgroup.long (0xBC0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB6,Device Endpoint-6 DMA Buffer Address Register" hgroup.long 0xBE0++0x03 "Device OUT Endpoint 7" hide.long 0x00 "DOEPCTL7,Device Endpoint-7 Control Register" hgroup.long (0xBE0+0x08)++0x03 hide.long 0x00 "DOEPINT7,Device Endpoint-7 Interrupt Register" hgroup.long (0xBE0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ7,Device Endpoint-7 Transfer Size Register" hgroup.long (0xBE0+0x14)++0x03 hide.long 0x00 "DOEPDMA7,Device Endpoint-7 DMA Address Register" hgroup.long (0xBE0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB7,Device Endpoint-7 DMA Buffer Address Register" hgroup.long 0xC00++0x03 "Device OUT Endpoint 8" hide.long 0x00 "DOEPCTL8,Device Endpoint-8 Control Register" hgroup.long (0xC00+0x08)++0x03 hide.long 0x00 "DOEPINT8,Device Endpoint-8 Interrupt Register" hgroup.long (0xC00+0x10)++0x03 hide.long 0x00 "DOEPTSIZ8,Device Endpoint-8 Transfer Size Register" hgroup.long (0xC00+0x14)++0x03 hide.long 0x00 "DOEPDMA8,Device Endpoint-8 DMA Address Register" hgroup.long (0xC00+0x1C)++0x03 hide.long 0x00 "DOEPDMAB8,Device Endpoint-8 DMA Buffer Address Register" hgroup.long 0xC20++0x03 "Device OUT Endpoint 9" hide.long 0x00 "DOEPCTL9,Device Endpoint-9 Control Register" hgroup.long (0xC20+0x08)++0x03 hide.long 0x00 "DOEPINT9,Device Endpoint-9 Interrupt Register" hgroup.long (0xC20+0x10)++0x03 hide.long 0x00 "DOEPTSIZ9,Device Endpoint-9 Transfer Size Register" hgroup.long (0xC20+0x14)++0x03 hide.long 0x00 "DOEPDMA9,Device Endpoint-9 DMA Address Register" hgroup.long (0xC20+0x1C)++0x03 hide.long 0x00 "DOEPDMAB9,Device Endpoint-9 DMA Buffer Address Register" hgroup.long 0xC40++0x03 "Device OUT Endpoint 10" hide.long 0x00 "DOEPCTL10,Device Endpoint-10 Control Register" hgroup.long (0xC40+0x08)++0x03 hide.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" hgroup.long (0xC40+0x10)++0x03 hide.long 0x00 "DOEPTSIZ10,Device Endpoint-10 Transfer Size Register" hgroup.long (0xC40+0x14)++0x03 hide.long 0x00 "DOEPDMA10,Device Endpoint-10 DMA Address Register" hgroup.long (0xC40+0x1C)++0x03 hide.long 0x00 "DOEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" hgroup.long 0xC60++0x03 "Device OUT Endpoint 11" hide.long 0x00 "DOEPCTL11,Device Endpoint-11 Control Register" hgroup.long (0xC60+0x08)++0x03 hide.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" hgroup.long (0xC60+0x10)++0x03 hide.long 0x00 "DOEPTSIZ11,Device Endpoint-11 Transfer Size Register" hgroup.long (0xC60+0x14)++0x03 hide.long 0x00 "DOEPDMA11,Device Endpoint-11 DMA Address Register" hgroup.long (0xC60+0x1C)++0x03 hide.long 0x00 "DOEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" hgroup.long 0xC80++0x03 "Device OUT Endpoint 12" hide.long 0x00 "DOEPCTL12,Device Endpoint-12 Control Register" hgroup.long (0xC80+0x08)++0x03 hide.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" hgroup.long (0xC80+0x10)++0x03 hide.long 0x00 "DOEPTSIZ12,Device Endpoint-12 Transfer Size Register" hgroup.long (0xC80+0x14)++0x03 hide.long 0x00 "DOEPDMA12,Device Endpoint-12 DMA Address Register" hgroup.long (0xC80+0x1C)++0x03 hide.long 0x00 "DOEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" hgroup.long 0xCA0++0x03 "Device OUT Endpoint 13" hide.long 0x00 "DOEPCTL13,Device Endpoint-13 Control Register" hgroup.long (0xCA0+0x08)++0x03 hide.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" hgroup.long (0xCA0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ13,Device Endpoint-13 Transfer Size Register" hgroup.long (0xCA0+0x14)++0x03 hide.long 0x00 "DOEPDMA13,Device Endpoint-13 DMA Address Register" hgroup.long (0xCA0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" hgroup.long 0xCC0++0x03 "Device OUT Endpoint 14" hide.long 0x00 "DOEPCTL14,Device Endpoint-14 Control Register" hgroup.long (0xCC0+0x08)++0x03 hide.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" hgroup.long (0xCC0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ14,Device Endpoint-14 Transfer Size Register" hgroup.long (0xCC0+0x14)++0x03 hide.long 0x00 "DOEPDMA14,Device Endpoint-14 DMA Address Register" hgroup.long (0xCC0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" hgroup.long 0xCE0++0x03 "Device OUT Endpoint 15" hide.long 0x00 "DOEPCTL15,Device Endpoint-15 Control Register" hgroup.long (0xCE0+0x08)++0x03 hide.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" hgroup.long (0xCE0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ15,Device Endpoint-15 Transfer Size Register" hgroup.long (0xCE0+0x14)++0x03 hide.long 0x00 "DOEPDMA15,Device Endpoint-15 DMA Address Register" hgroup.long (0xCE0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" endif tree.end width 9. tree "Power and Clock Gating Register" group.long 0x0E00++0x03 line.long 0x00 "PCGCCTL,Power and Clock Gating Control Register" rbitfld.long 0x00 7. " L1SUSPENDED ,Deep Sleep" "Disabled,Enabled" rbitfld.long 0x00 6. " PHYSLEEP ,PHY In Sleep" "Disabled,Enabled" bitfld.long 0x00 3. " RSTPDWNMODULE ,Reset Power-Down Modules" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " STOPPCLK ,Stop Pclk" "No,Yes" tree.end width 0x0B tree.end tree "USB 1" base ad:0xFFB40000 width 11. tree "Global Registers" if (((d.l(ad:0xFFB40000+0x014))&0x01)==0x00) group.long 0x0000++0x07 line.long 0x00 "GOTGCTL,Control and Status Register" sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 21. " CURMOD ,Current Mode of Operation" "Device mode,Host mode" textline " " endif bitfld.long 0x00 20. " OTGVER ,OTG Version" "1.3,2.0" rbitfld.long 0x00 19. " BSESVLD ,B-Session Valid" "Not valid,Valid" textline " " rbitfld.long 0x00 16. " CONIDSTS ,Connector ID Status" "A-Device,B-Device" textline " " bitfld.long 0x00 11. " DEVHNPEN ,Device HNP Enabled" "Disabled,Enabled" bitfld.long 0x00 9. " HNPREQ ,HNP Request" "Not requested,Requested" rbitfld.long 0x00 8. " HSTNEGSCS ,Host Negotiation Success" "Failure,Success" textline " " bitfld.long 0x00 7. " BVALIDOVVAL ,B-Peripheral Session Valid Override Value" "Low,High" bitfld.long 0x00 6. " BVALIDOVEN ,B-Peripheral Session Valid Override Enable" "Disabled,Enabled" bitfld.long 0x00 5. " AVALIDOVVAL ,A-Peripheral Session Valid Override Value" "Low,High" textline " " bitfld.long 0x00 4. " AVALIDOVEN ,A-Peripheral Session Valid Override Enable" "Disabled,Enabled" bitfld.long 0x00 3. " VBVALIDOVVAL ,VBUS Valid Override Value" "Low,High" bitfld.long 0x00 2. " VBVALIDOVEN ,VBUS Valid Override Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " SESREQ ,Session Request" "Not requested,Requested" bitfld.long 0x00 0. " SESREQSCS ,Session Request Success" "Failure,Success" line.long 0x04 "GOTGINT,OTG Interrupt Register" eventfld.long 0x04 18. " ADEVTOUTCHG ,A-Device Timeout Change" "Not occurred,Occurred" eventfld.long 0x04 17. " HSTNEGDET ,Host Negotiation Detected" "Not detected,Detected" eventfld.long 0x04 9. " HSTNEGSUCSTSCHNG ,Host Negotiation Success Status Change" "Not changed,Changed" textline " " eventfld.long 0x04 8. " SESREQSUCSTSCHNG ,Session Request Success Status Change" "Not changed,Changed" eventfld.long 0x04 2. " SESENDDET ,Session End Detected" "Not detected,Detected" if (((d.l(ad:0xFFB40000+0x08))&0x200000)==0x200000) group.long 0x08++0x03 line.long 0x00 "GAHBCFG,AHB Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert Descriptor Endianess" "Not inverted,Inverted" bitfld.long 0x00 23. " AHBSINGLE ,AHB Single Support" "Disabled,Enabled" textline " " endif bitfld.long 0x00 22. " NOTIALLDMAWRIT ,Notify All DMA Write Transactions" "Last,All" textline " " bitfld.long 0x00 21. " REMMEMSUPP ,Remote Memory Support" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " NPTXFEMPLVL ,Non-Periodic TxFIFO Empty Level" "Not empty,Empty" bitfld.long 0x00 5. " DMAEN ,DMA Enable" "Slave mode,DMA mode" textline " " bitfld.long 0x00 1.--4. " HBSTLEN ,Burst Length/Type" "WORD1ORSINGLE,WORD4ORINCR,WORD8,WORD16ORINCR4,WORD32,WORD64ORINCR8,WORD128,WORD256ORINCR16,?..." bitfld.long 0x00 0. " GLBLINTRMS ,Global Interrupt Mask" "Masked,Not masked" else group.long 0x08++0x03 line.long 0x00 "GAHBCFG,AHB Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert Descriptor Endianess" "Not inverted,Inverted" bitfld.long 0x00 23. " AHBSINGLE ,AHB Single Support" "Disabled,Enabled" textline " " endif bitfld.long 0x00 21. " REMMEMSUPP ,Remote Memory Support" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " NPTXFEMPLVL ,Non-Periodic TxFIFO Empty Level" "Not empty,Empty" bitfld.long 0x00 5. " DMAEN ,DMA Enable" "Slave mode,DMA mode" textline " " bitfld.long 0x00 1.--4. " HBSTLEN ,Burst Length/Type" "WORD1ORSINGLE,WORD4ORINCR,WORD8,WORD16ORINCR4,WORD32,WORD64ORINCR8,WORD128,WORD256ORINCR16,?..." bitfld.long 0x00 0. " GLBLINTRMS ,Global Interrupt Mask" "Masked,Not masked" endif group.long 0x0C++0x07 line.long 0x00 "GUSBCFG,USB Configuration Register" bitfld.long 0x00 31. " CORRUPTTXPKT ,Corrupt Tx packet" "Normal,Debug" bitfld.long 0x00 30. " FORCEDEVMODE ,Force Device Mode" "Normal,Force device" bitfld.long 0x00 29. " FORCEHSTMODE ,Force Host Mode" "Normal,Force host" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 28. " TXENDDELAY ,Tx End Delay" "Disabled,Enabled" rbitfld.long 0x00 26. " IC_USBCAP ,IC_USB-Capable" "Not capable,Capable" textline " " else bitfld.long 0x00 28. " TXENDDELAY ,Tx End Delay" "Disabled,?..." textline " " endif bitfld.long 0x00 22. " TERMSELDLPULSE ,TermSel DLine Pulsing Selection" "TXVALID,TERMSEL" textline " " bitfld.long 0x00 19. " ULPICLKSUSM ,ULPI Clock SuspendM" "Enabled,Disabled" bitfld.long 0x00 18. " ULPIAUTORES ,ULPI Auto Resume" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 10.--13. " USBTRDTIM ,USB Turnaround Time" ",,,,,16-bit UTMI+,,,,8-bit UTMI+,?..." textline " " else bitfld.long 0x00 10.--13. " USBTRDTIM ,USB Turnaround Time" ",,,,,,,,,8-bit UTMI+,?..." textline " " endif bitfld.long 0x00 9. " HNPCAP ,HNP-Capable" "Not capable,Capable" bitfld.long 0x00 8. " SRPCAP ,SRP-Capable" "Not capable,Capable" bitfld.long 0x00 7. " DDRSEL ,ULPI DDR Select" "SDR,DDR" textline " " rbitfld.long 0x00 6. " PHYSEL ,USB 2.0 High-Speed PHY" "USB 2.0 high-speed,?..." rbitfld.long 0x00 5. " FSINTF ,Full-Speed Serial Interface Select" "6-pin,3-pin" rbitfld.long 0x00 4. " ULPI_UTMI_SEL ,ULPI Select" "ULPI PHY,?..." textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 3. " PHYIF ,PHY Interface" "PHY 8bit Mode,PHY 16bit Mode" textline " " else rbitfld.long 0x00 3. " PHYIF ,PHY Interface" "PHY 8bit Mode,?..." textline " " endif bitfld.long 0x00 0.--2. " TOUTCAL ,FS Timeout Calibration" "0,1,2,3,4,5,6,7" line.long 0x04 "GRSTCTL,Reset Register" rbitfld.long 0x04 31. " AHBIDLE ,AHB Master Idle" "Not occurred,Occurred" rbitfld.long 0x04 30. " DMAREQ ,DMA Request Signal" "No request,Request" bitfld.long 0x04 6.--10. " TXFNUM ,TxFIFO Number" "Tx FIFO 0,Tx FIFO 1,Tx FIFO 2,Tx FIFO 3,Tx FIFO 4,Tx FIFO 5,Tx FIFO 6,Tx FIFO 7,Tx FIFO 8,Tx FIFO 9,Tx FIFO 10,Tx FIFO 11,Tx FIFO 12,Tx FIFO 13,Tx FIFO 14,Tx FIFO 15,All,?..." textline " " bitfld.long 0x04 5. " TXFFLSH ,TxFIFO Flush" "No effect,Flush" bitfld.long 0x04 4. " RXFFLSH ,RxFIFO Flush" "No effect,Flush" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x04 1. " PIUFSSFTRST ,PIU FS Dedicated Controller Soft Reset" "No effect,Reset" textline " " endif bitfld.long 0x04 0. " CSFTRST ,Core Soft Reset" "No effect,Reset" else group.long 0x0000++0x07 line.long 0x00 "GOTGCTL,Control and Status Register" sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 21. " CURMOD ,Current Mode of Operation" "Device mode,Host mode" textline " " endif bitfld.long 0x00 20. " OTGVER ,OTG Version" "1.3,2.0" rbitfld.long 0x00 18. " ASESVLD ,A-Session Valid" "Not valid,Valid" rbitfld.long 0x00 17. " DBNCTIME ,Long/Short Debounce Time" "Long,Short" textline " " rbitfld.long 0x00 16. " CONIDSTS ,Connector ID Status" "A-Device,B-Device" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 14. " EHEN ,Embedded Host Enable" "Disabled,Enabled" textline " " endif bitfld.long 0x00 10. " HSTSETHNPEN ,Host Set HNP Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " BVALIDOVVAL ,B-Peripheral Session Valid Override Value" "Low,High" bitfld.long 0x00 6. " BVALIDOVEN ,B-Peripheral Session Valid Override Enable" "Disabled,Enabled" bitfld.long 0x00 5. " AVALIDOVVA ,A-Peripheral Session Valid Override Value" "Low,High" textline " " bitfld.long 0x00 4. " AVALIDOVEN ,A-Peripheral Session Valid Override Enable" "Disabled,Enabled" bitfld.long 0x00 3. " VBVALIDOVVAL ,VBUS Valid Override Value" "Low,High" bitfld.long 0x00 2. " VBVALIDOVEN ,VBUS Valid Override Enable" "Disabled,Enabled" line.long 0x04 "GOTGINT,OTG Interrupt Register" eventfld.long 0x04 19. " DBNCEDONE ,Debounce Done" "Not occurred,Occurred" textline " " eventfld.long 0x04 18. " ADEVTOUTCHG ,A-Device Timeout Change" "Not occurred,Occurred" eventfld.long 0x04 17. " HSTNEGDET ,Host Negotiation Detected" "Not detected,Detected" eventfld.long 0x04 9. " HSTNEGSUCSTSCHNG ,Host Negotiation Success Status Change" "Not changed,Changed" textline " " eventfld.long 0x04 8. " SESREQSUCSTSCHNG ,Session Request Success Status Change" "Not changed,Changed" eventfld.long 0x04 2. " SESENDDET ,Session End Detected" "Not detected,Detected" if (((d.l(ad:0xFFB40000+0x08))&0x200000)==0x200000) group.long 0x08++0x03 line.long 0x00 "GAHBCFG,AHB Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert Descriptor Endianess" "Not inverted,Inverted" bitfld.long 0x00 23. " AHBSINGLE ,AHB Single Support" "Disabled,Enabled" textline " " endif bitfld.long 0x00 22. " NOTIALLDMAWRIT ,Notify All DMA Write Transactions" "Last,All" textline " " bitfld.long 0x00 21. " REMMEMSUPP ,Remote Memory Support" "Disabled,Enabled" bitfld.long 0x00 8. " PTXFEMPLVL ,Periodic TxFIFO Empty Level" "Half,Completely" textline " " bitfld.long 0x00 7. " NPTXFEMPLVL ,Non-Periodic TxFIFO Empty Level" "Half,Completely" bitfld.long 0x00 5. " DMAEN ,DMA Enable" "Slave mode,DMA mode" textline " " bitfld.long 0x00 1.--4. " HBSTLEN ,Burst Length/Type" "WORD1ORSINGLE,WORD4ORINCR,WORD8,WORD16ORINCR4,WORD32,WORD64ORINCR8,WORD128,WORD256ORINCR16,?..." bitfld.long 0x00 0. " GLBLINTRMS ,Global Interrupt Mask" "Masked,Not masked" else group.long 0x08++0x03 line.long 0x00 "GAHBCFG,AHB Configuration Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 24. " INVDESCENDIANESS ,Invert Descriptor Endianess" "Not inverted,Inverted" bitfld.long 0x00 23. " AHBSINGLE ,AHB Single Support" "Disabled,Enabled" textline " " endif bitfld.long 0x00 21. " REMMEMSUPP ,Remote Memory Support" "Disabled,Enabled" bitfld.long 0x00 8. " PTXFEMPLVL ,Periodic TxFIFO Empty Level" "Half,Completely" textline " " bitfld.long 0x00 7. " NPTXFEMPLVL ,Non-Periodic TxFIFO Empty Level" "Half,Completely" bitfld.long 0x00 5. " DMAEN ,DMA Enable" "Slave mode,DMA mode" textline " " bitfld.long 0x00 1.--4. " HBSTLEN ,Burst Length/Type" "WORD1ORSINGLE,WORD4ORINCR,WORD8,WORD16ORINCR4,WORD32,WORD64ORINCR8,WORD128,WORD256ORINCR16,?..." bitfld.long 0x00 0. " GLBLINTRMS ,Global Interrupt Mask" "Masked,Not masked" endif group.long 0x0C++0x07 line.long 0x00 "GUSBCFG,USB Configuration Register" bitfld.long 0x00 31. " CORRUPTTXPKT ,Corrupt Tx packet" "Normal,Debug" bitfld.long 0x00 30. " FORCEDEVMODE ,Force Device Mode" "Normal,Force device" bitfld.long 0x00 29. " FORCEHSTMODE ,Force Host Mode" "Normal,Force host" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 26. " IC_USBCAP ,IC_USB-Capable" "Not capable,Capable" textline " " endif bitfld.long 0x00 25. " ULPI ,ULPI Interface Protect Disable" "No,Yes" bitfld.long 0x00 24. " INDICATOR ,Indicator Pass Through" "Qualified,Not qualified" bitfld.long 0x00 23. " COMPLEMENT ,Indicator Complement" "Not inverted,Inverted" textline " " bitfld.long 0x00 21. " ULPIEXTVBUSINDICATOR ,ULPI External VBUS Indicator" "Internal,External" bitfld.long 0x00 20. " ULPIEXTVBUSDRV ,ULPI External VBUS Drive" "Internal,External" textline " " bitfld.long 0x00 19. " ULPICLKSUSM ,ULPI Clock Suspend" "Enabled,Disabled" bitfld.long 0x00 18. " ULPIAUTORES ,ULPI Auto Resume" "Disabled,Enabled" textline " " bitfld.long 0x00 9. " HNPCAP ,HNP-Capable" "Not capable,Capable" bitfld.long 0x00 8. " SRPCAP ,SRP-Capable" "Not capable,Capable" bitfld.long 0x00 7. " DDRSEL ,ULPI DDR Select" "SDR,DDR" textline " " rbitfld.long 0x00 6. " PHYSEL ,USB 2.0 High-Speed PHY" "USB 2.0 high-speed,?..." rbitfld.long 0x00 5. " FSINTF ,Full-Speed Serial Interface Select" "6-pin,3-pin" rbitfld.long 0x00 4. " ULPI_UTMI_SEL ,ULPI Select" "ULPI PHY,?..." textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 3. " PHYIF ,PHY Interface" "PHY 8bit Mode,PHY 16bit Mode" textline " " else rbitfld.long 0x00 3. " PHYIF ,PHY Interface" "PHY 8bit Mode,?..." textline " " endif bitfld.long 0x00 0.--2. " TOUTCAL ,FS Timeout Calibration" "0,1,2,3,4,5,6,7" line.long 0x04 "GRSTCTL,Reset Register" rbitfld.long 0x04 31. " AHBIDLE ,AHB Master Idle" "Not occurred,Occurred" rbitfld.long 0x04 30. " DMAREQ ,DMA Request Signal" "No request,Request" bitfld.long 0x04 6.--10. " TXFNUM ,TxFIFO Number" "Tx FIFO 0,Tx FIFO 1,Tx FIFO 2,Tx FIFO 3,Tx FIFO 4,Tx FIFO 5,Tx FIFO 6,Tx FIFO 7,Tx FIFO 8,Tx FIFO 9,Tx FIFO 10,Tx FIFO 11,Tx FIFO 12,Tx FIFO 13,Tx FIFO 14,Tx FIFO 15,All,?..." textline " " bitfld.long 0x04 5. " TXFFLSH ,TxFIFO Flush" "No effect,Flush" bitfld.long 0x04 4. " RXFFLSH ,RxFIFO Flush" "No effect,Flush" bitfld.long 0x04 2. " FRMCNTRRST ,Host Frame Counter Reset" "No effect,Reset" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x04 1. " PIUFSSFTRST ,PIU FS Dedicated Controller Soft Reset" "No effect,Reset" textline " " endif bitfld.long 0x04 0. " CSFTRST ,Core Soft Reset" "No effect,Reset" endif if (((d.l(ad:0xFFB40000+0x014))&0x01)==0x00) group.long 0x014++0x07 line.long 0x00 "GINTSTS,Interrupt Register" eventfld.long 0x00 31. " WKUPINT ,Resume/Remote Wakeup Detected Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 30. " SESSREQINT ,Session Request/New Session Detected Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 28. " CONLDSTSCHNG ,Connector ID Status Change Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 23. " RESETDET ,Reset detected Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 22. " FETSUSP ,Data Fetch Suspended Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 21. " INCOMPLSOOUT ,Incomplete Isochronous OUT Transfer Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 20. " INCOMPISOIN ,Incomplete Isochronous IN Transfer Interrupt" "No intrrupt,Interrupt" rbitfld.long 0x00 19. " OEPINT ,OUT Endpoints Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 18. " IEPINT ,IN Endpoints Interrupt" "No interrupt,Interrupt" textline " " rbitfld.long 0x00 17. " EPMIS ,Endpoint Mismatch Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" eventfld.long 0x00 15. " EOPF ,End of Periodic Frame Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 14. " ISOOUTDROP ,Isochronous OUT Packet Dropped Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 13. " ENUMDONE ,Enumeration Done Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 12. " USBRST ,USB Reset" "No interrupt,Interrupt" textline " " eventfld.long 0x00 11. " USBSUSP ,USB Suspend Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 10. " ERLYSUSP ,Early Suspend Interrupt" "No interrupt,Interrupt" textline " " rbitfld.long 0x00 7. " GOUTNAKEFF , Global OUT NAK Effective Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 6. " GINNAKEFF ,Global IN Non-Periodic NAK Effective Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 5. " NPTXFEMP ,Non-periodic TxFIFO Empty Interrupt" "No interrupt,Interrupt" textline " " endif rbitfld.long 0x00 4. " RXFLVL ,RxFIFO Non-Empty Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " SOF ,Start of Frame Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 2. " OTGINT ,OTG Interrupt Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 1. " MODEMIS ,Mode Mismatch Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 0. " CURMOD ,Current Mode of Operation Interrupt" "Device mode,Host mode" line.long 0x04 "GINTMSK,Interrupt Mask Register" bitfld.long 0x04 31. " WKUPINTMSK ,Resume/Remote Wakeup Detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 30. " SESSREQINTMSK ,Session Request/New Session Detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 29. " DISCONNINTMSK ,Disconnect Detected Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 28. " CONLDSTSCHNGMSK ,Connector ID Status Change Mask" "Masked,Not masked" textline " " bitfld.long 0x04 23. " RESETDETMSK ,Reset detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 22. " FETSUSPMSK ,Data Fetch Suspended Mask" "Masked,Not masked" textline " " bitfld.long 0x04 20. " INCOMPLSOINMSK ,Incomplete Isochronous IN Transfer Mask" "Masked,Not masked" bitfld.long 0x04 19. " OEPINTMSK ,OUT Endpoints Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 18. " IEPINTMSK ,IN Endpoints Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 17. " EPMISMSK ,Endpoint Mismatch Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 15. " EOPFMSK ,End of Periodic Frame Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 14. " ISOOUTDROPMSK ,Isochronous OUT Packet Dropped Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 13. " ENUMDONEMS ,Enumeration Done Mask" "Masked,Not masked" bitfld.long 0x04 12. " USBRSTMSK ,USB Reset Mask" "Masked,Not masked" textline " " bitfld.long 0x04 11. " USBSUSPMK , USB Suspend Mask" "Masked,Not masked" bitfld.long 0x04 10. " ERLYSUSPMSK ,Early Suspend Mask" "Masked,Not masked" textline " " bitfld.long 0x04 7. " GOUTNAKEFFMSK ,Global OUT NAK Effective Mask" "Masked,Not masked" bitfld.long 0x04 6. " GINNAKEFFMSK ,Global Non-periodic IN NAK Effective Mask" "Masked,Not masked" textline " " bitfld.long 0x04 4. " RXFLVLMSK ,Receive FIFO Non-Empty Mask" "Masked,Not masked" bitfld.long 0x04 3. " SOFMSK ,Start of Frame Mask" "Masked,Not masked" bitfld.long 0x04 2. " OTGINTMSK ,OTG Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " MODEMISMSK ,Mode Mismatch Interrupt Mask" "Masked,Not masked" else group.long 0x014++0x07 line.long 0x00 "GINTSTS,Interrupt Register" eventfld.long 0x00 31. " WKUPINT ,Resume/Remote Wakeup Detected Interrupt" "Not activated,Activated" eventfld.long 0x00 30. " SESSREQINT ,Session Request/New Session Detected Interrupt" "Not activated,Activated" eventfld.long 0x00 29. " DISCONNINT ,Disconnect Detected Interrupt" "Not detected,Detected" textline " " eventfld.long 0x00 28. " CONLDSTSCHNG ,Connector ID Status Change Interrupt" "Not occurred,Occurred" rbitfld.long 0x00 26. " PTXFEMP ,Periodic TxFIFO Empty Interrupt" "No interrupt,Interrupt" textline " " rbitfld.long 0x00 25. " HCHINT ,Host Channels Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 24. " PRTINT ,Host Port Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 21. " INCOMPLP ,Incomplete Isochronous OUT Transfer Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 5. " NPTXFEMP ,Non-periodic TxFIFO Empty Interrupt" "No interrupt,Interrupt" textline " " endif rbitfld.long 0x00 4. " RXFLVL ,RxFIFO Non-Empty Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " SOF ,Start of Frame Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 2. " OTGINT ,OTG Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 1. " MODEMIS ,Mode Mismatch Interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 0. " CURMOD ,Current Mode of Operation" "Device mode,Host mode" line.long 0x04 "GINTMSK,Interrupt Mask Register" bitfld.long 0x04 31. " WKUPINTMSK ,Resume/Remote Wakeup Detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 30. " SESSREQINTMSK ,Session Request/New Session Detected Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 29. " DISCONNINTMSK ,Disconnect Detected Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 28. " CONLDSTSCHNGMSK ,Connector ID Status Change Mask" "Masked,Not masked" bitfld.long 0x04 26. " PTXFEMPMSK ,Periodic TxFIFO Empty Mask" "Masked,Not masked" textline " " bitfld.long 0x04 25. " HCHINTMSK ,Host Channels Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 24. " PRTINTMSK ,Host Port Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 21. " INCOMPIPMSK ,Incomplete Periodic Transfer Mask" "Masked,Not masked" textline " " bitfld.long 0x04 4. " RXFLVLMSK ,Receive FIFO Non-Empty Mask" "Masked,Not masked" bitfld.long 0x04 3. " SOFMSK ,Start of Frame Mask" "Masked,Not masked" bitfld.long 0x04 2. " OTGINTMSK ,OTG Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " MODEMISMSK ,Mode Mismatch Interrupt Mask" "Masked,Not masked" endif if (((d.l(ad:0xFFB40000+0x014))&0x01)==0x00) rgroup.long 0x001C++0x07 line.long 0x00 "GRXSTSR,Receive Status Debug Read Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21.--24. " FN ,Frame Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 17.--20. " PKTSTS ,Packet Status" ",Global OUT NAK,OUT received,OUT transfer completed,SETUP transaction completed,,SETUP received,?..." textline " " endif bitfld.long 0x00 15.--16. " DPID ,Data PID" "DATA0,DATA1,DATA2,MDATA" hexmask.long.word 0x00 4.--14. 1. " BCNT ,Byte Count" bitfld.long 0x00 0.--3. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "GRXSTSP,Status Read and Pop Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x04 21.--24. " FN ,Frame Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x04 17.--20. " PKTSTS ,Packet Status" ",Global OUT NAK,OUT received,OUT transfer completed,SETUP transaction completed,,SETUP received,?..." textline " " endif bitfld.long 0x04 15.--16. " DPID ,Data PID" "DATA0,DATA1,DATA2,MDATA" hexmask.long.word 0x04 4.--14. 1. " BCNT ,Byte Count" bitfld.long 0x04 0.--3. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" else rgroup.long 0x001C++0x07 line.long 0x00 "GRXSTSR,Receive Status Debug Read Register" bitfld.long 0x00 17.--20. " PKTSTS ,Packet Status" ",,IN received,IN transfer completed,,Data toggle error,,Channel halted,?..." textline " " bitfld.long 0x00 15.--16. " DPID ,Data PID" "DATA0,DATA1,DATA2,MDATA" hexmask.long.word 0x00 4.--14. 1. " BCNT ,Byte Count" bitfld.long 0x00 0.--3. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x04 "GRXSTSP,Status Read and Pop Register" bitfld.long 0x04 17.--20. " PKTSTS ,Packet Status" ",,IN received,IN transfer completed,,Data toggle error,,Channel halted,?..." textline " " bitfld.long 0x04 15.--16. " DPID ,Data PID" "DATA0,DATA1,DATA2,MDATA" hexmask.long.word 0x04 4.--14. 1. " BCNT ,Byte Count" bitfld.long 0x04 0.--3. " CHNUM ,Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" endif group.long 0x0024++0x03 line.long 0x00 "GRXFSIZ,Receive FIFO Size Register" hexmask.long.word 0x00 0.--13. 1. " RXFDEP ,RxFIFO Depth" if (((d.l(ad:0xFFB40000+0x014))&0x01)==0x01) group.long 0x0028++0x03 line.long 0x00 "GNPTXFSIZ,Non-Periodic Transmit FIFO Size Register" sif cpu()=="ARRIA10SOC" hexmask.long.word 0x00 16.--31. 1. " NPTXFDEP ,Non-periodic TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " NPTXFSTADDR ,Non-periodic Transmit RAM Start Address" else hexmask.long.word 0x00 16.--29. 1. " NPTXFDEP ,Non-periodic TxFIFO Depth" hexmask.long.word 0x00 0.--13. 1. " NPTXFSTADDR ,Non-periodic Transmit RAM Start Address" endif endif rgroup.long 0x002C++0x03 line.long 0x00 "GNPTXSTS,Non-Periodic Transmit FIFO/Queue Status Register" bitfld.long 0x00 27.--30. " NPTXQTOP[6:3] ,Top of the Non-periodic Transmit Request Queue - Channel/Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 25.--26. " [2:1] ,Top of the Non-periodic Transmit Request Queue - Entry Type" "IN/OUT token,0-length tx packet,PING/CSPLIT token,Channel halt cmd" bitfld.long 0x00 24. " [0] ,Top of the Non-periodic Transmit Request Queue - Terminate" "No,Yes" textline " " hexmask.long.byte 0x00 16.--23. 1. " NPTXQSPCAVAIL ,Non-periodic Transmit Request Queue Space Available" hexmask.long.word 0x00 0.--15. 1. " NPTXFSPCAVAIL ,Non-periodic TxFIFO Space Avail" group.long 0x34++0x07 line.long 0x00 "GPVNDCTL,PHY Vendor Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " DISULPIDRVR ,Disable ULPI Drivers" "No,Yes" bitfld.long 0x00 27. " VSTSDONE ,VStatus Done" "Not activated,Activated" textline " " rbitfld.long 0x00 26. " VSTSBSY ,VStatus Busy" "Not busy,Busy" bitfld.long 0x00 25. " NEWREGREQ ,New Register Request" "Not requested,Requested" textline " " else rbitfld.long 0x00 31. " DISULPIDRVR ,Disable ULPI Drivers" "No,Yes" rbitfld.long 0x00 27. " VSTSDONE ,VStatus Done" "Not activated,Activated" textline " " rbitfld.long 0x00 26. " VSTSBSY ,VStatus Busy" "Not busy,Busy" rbitfld.long 0x00 25. " NEWREGREQ ,New Register Request" "Not requested,Requested" textline " " endif bitfld.long 0x00 22. " REGWR ,Register Write" "Read,Write" hexmask.long.byte 0x00 16.--21. 1. " REGADDR ,Register Address" textline " " hexmask.long.byte 0x00 8.--15. 1. " VCTRL ,UTMI+ Vendor Control Register Address" hexmask.long.byte 0x00 0.--7. 1. " REGDATA ,Register Data" line.long 0x04 "GGPIO,General Purpose Input Output Register" hexmask.long.word 0x04 16.--31. 1. " GPO ,General Purpose Output" hexmask.long.word 0x04 0.--15. 1. " GPI ,General Purpose Input" rgroup.long 0x3C++0x03 line.long 0x00 "GUID,User ID Register" rgroup.long 0x40++0x13 line.long 0x00 "GSNPSID,Synopsys ID Register" line.long 0x04 "GHWCFG1,User HW Config1 Register" bitfld.long 0x04 30.--31. " GHWCFG1[31:30] ,Endpoint 15 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 28.--29. " [29:28] ,Endpoint 14 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 26.--27. " [27:26] ,Endpoint 13 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 24.--25. " [25:24] ,Endpoint 12 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 22.--23. " [23:22] ,Endpoint 11 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 20.--21. " [21:20] ,Endpoint 10 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 18.--19. " [19:18] ,Endpoint 9 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 16.--17. " [17:16] ,Endpoint 8 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 14.--15. " [15:14] ,Endpoint 7 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 12.--13. " [13:12] ,Endpoint 6 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 10.--11. " [11:10] ,Endpoint 5 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 8.--9. " [9:8] ,Endpoint 4 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 6.--7. " [7:6] ,Endpoint 3 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 4.--5. " [5:4] ,Endpoint 2 Direction" "BIDIR,IN,OUT,?..." bitfld.long 0x04 2.--3. " [3:2] ,Endpoint 1 Direction" "BIDIR,IN,OUT,?..." textline " " bitfld.long 0x04 0.--1. " [1:0] ,Endpoint 0 Direction" "BIDIR,IN,OUT,?..." line.long 0x08 "GHWCFG2,User HW Config2 Register" bitfld.long 0x08 26.--30. " TKNQDEPTH ,Device Mode IN Token Sequence Learning Queue Depth" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,?..." bitfld.long 0x08 24.--25. " PTXQDEPTH ,Host Mode Periodic Request Queue Depth" "2,4,8,16" bitfld.long 0x08 22.--23. " NPTXQDEPTH ,Non Periodic Request Queue Depth" "2,4,8,?..." textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x08 20. " MULTIPROCINTRPT ,Multi Processor Interrupt Enabled" "Disabled,Enabled" textline " " endif bitfld.long 0x08 19. " DYNFIFOSIZING ,Dynamic FIFO Sizing Enabled" ",Enabled" bitfld.long 0x08 18. " PERIOSUPPORT ,Periodic OUT Channels Supported in Host Mode" ",Enabled" textline " " bitfld.long 0x08 14.--17. " NUMHSTCHNL ,Number of Host Channels" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 10.--13. " NUMDEVEPS ,Number of Device Endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x08 8.--9. " FSPHYTYPE ,Full Speed PHY Interface Type" "Not supported,Dedicated,UTMI+,ULPI" bitfld.long 0x08 6.--7. " HSPHYTYPE ,High Speed PHY Interface Type" "Not supported,UTMI+,ULPI,UTMI+ and ULPI" textline " " else bitfld.long 0x08 8.--9. " FSPHYTYPE ,Full Speed PHY Interface Type" ",,ULPI Type,?..." bitfld.long 0x08 6.--7. " HSPHYTYPE ,High Speed PHY Interface Type" "No HS,,ULPI,?..." textline " " endif bitfld.long 0x08 5. " SINGPNT ,Point-to-Point" "Multi-point,Single-point" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x08 3.--4. " OTGARCH ,Architecture" "Slave-only,External DMA,Internal DMA,?..." textline " " else bitfld.long 0x08 3.--4. " OTGARCH ,Architecture" ",,DMA,?..." textline " " endif bitfld.long 0x08 0.--2. " OTGMODE ,Mode of Operation" "HNP & SRP OTG,SRP OTG,Non-HNP & Non-SRP OTG,SRP Device,NON-OTG Device,SRP Host,NON-OTG Host,?..." line.long 0x0C "GHWCFG3,User HW Config3 Register" hexmask.long.word 0x0C 16.--31. 1. " DFIFODEPTH ,DFIFO Depth" bitfld.long 0x0C 15. " LPMMODE ,OTG ENABLE LPM" "Disabled,?..." bitfld.long 0x0C 14. " BCSUPPORT ,OTG BC SUPPORT" "Disabled,?..." textline " " bitfld.long 0x0C 13. " HSICMODE ,OTG ENABLE HSIC" "Disabled,?..." bitfld.long 0x0C 12. " ADPSUPPORT ,OTG ADP Support" ",Enabled" bitfld.long 0x0C 11. " RSTTYPE ,Reset Style for Clocked always Blocks in RTL" "Enabled,?..." textline " " bitfld.long 0x0C 10. " OPTFEATURE ,Optional Features Removed" "Disabled,?..." bitfld.long 0x0C 9. " VNDCTLSUPT ,Vendor Control Interface Support" ",Enabled" bitfld.long 0x0C 8. " I2CINTSEL ,I2C Selection" "Disabled,?..." textline " " bitfld.long 0x0C 7. " OTGEN ,OTG Function" "Disabled,Enabled" bitfld.long 0x0C 4.--6. " PKTSIZEWIDTH ,Width of Packet Size Counters" "4,5,6,7,8,9,10,?..." bitfld.long 0x0C 0.--3. " XFERSIZEWIDTH ,Width of Transfer Size Counters" "11,12,13,14,15,16,17,18,19,?..." line.long 0x10 "GHWCFG4,User HW Config4 Register" bitfld.long 0x10 31. " DMA ,Scatter Gather DMA" "Disabled,Enabled" bitfld.long 0x10 30. " DMA_CONFIGURATION ,Scatter Gather DMA configuration" "Non-scater,Scater" bitfld.long 0x10 26.--29. " INEPS ,Number of Device Mode IN Endpoints Including Control" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x10 25. " DEDFIFOMODE ,Enable Dedicated Transmit FIFO for device IN Endpoints" "Disabled,Enabled" bitfld.long 0x10 24. " SESSENDFLTR ,Session End Filter" "Disabled,Enabled" bitfld.long 0x10 23. " BVALIDFLTR ,b_valid Filter" "Disabled,Enabled" textline " " bitfld.long 0x10 22. " AVALIDFLTR ,a_valid Filter" "Disabled,Enabled" bitfld.long 0x10 21. " VBUSVALIDFLTR ,Vbus Valid Filter" "Disabled,Enabled" bitfld.long 0x10 20. " IDDGFLTR ,Iddig Filter" "Disabled,Enabled" textline " " bitfld.long 0x10 16.--19. " NUMCTLEPS ,Number of Device Mode Control Endpoints in Addition to Endpoint 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x10 14.--15. " PHYDATAWIDTH ,UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width" "8-bit,16-bit,8-bit/16-bit,?..." textline " " bitfld.long 0x10 7. " EXTENDEDHIBERNATION ,Extended Hibernation" "Disabled,Enabled" textline " " else bitfld.long 0x10 14.--15. " PHYDATAWIDTH ,UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width" "8-bit,?..." textline " " endif bitfld.long 0x10 6. " HIBERNATION ,Enable Hibernation" "Disabled,Enabled" bitfld.long 0x10 5. " AHBFREQ ,Minimum AHB Frequency Less Than 60 MHz" "Disabled,Enabled" bitfld.long 0x10 4. " PARTIALPWRDN ,Enable Partial Power Down" "Disabled,Enabled" textline " " bitfld.long 0x10 0.--3. " NUMDEVPERIOEPS ,Number of Device Mode Periodic IN Endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x005C++0x03 line.long 0x00 "GDFIFOCFG,DFIFO Software Config Register" hexmask.long.word 0x00 16.--31. 1. " EPINFOBASEADDR ,End Point Info Basr Addr" hexmask.long.word 0x00 0.--15. 1. " GDFIFOCFG ,DFIFO Software Config" group.long 0x0100++0x03 line.long 0x00 "HPTXFSIZ,Host Periodic Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " PTXFSIZE ,Host Periodic TxFIFO Depth" hexmask.long.word 0x00 0.--14. 1. " PTXFSTADDR ,Host Periodic TxFIFO Start Address" group.long 0x104++0x03 line.long 0x00 "DIEPTXF1 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP1 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--14. 1. " INEP1 TXFSTADDR ,IN Endpoint FIFO1 Transmit RAM Start Address" group.long 0x108++0x03 line.long 0x00 "DIEPTXF2 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP2 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--14. 1. " INEP2 TXFSTADDR ,IN Endpoint FIFO2 Transmit RAM Start Address" group.long 0x10C++0x03 line.long 0x00 "DIEPTXF3 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP3 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP3 TXFSTADDR ,IN Endpoint FIFO3 Transmit RAM Start Address" group.long 0x110++0x03 line.long 0x00 "DIEPTXF4 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP4 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP4 TXFSTADDR ,IN Endpoint FIFO4 Transmit RAM Start Address" group.long 0x114++0x03 line.long 0x00 "DIEPTXF5 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP5 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP5 TXFSTADDR ,IN Endpoint FIFO5 Transmit RAM Start Address" group.long 0x118++0x03 line.long 0x00 "DIEPTXF6 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP6 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP6 TXFSTADDR ,IN Endpoint FIFO6 Transmit RAM Start Address" group.long 0x11C++0x03 line.long 0x00 "DIEPTXF7 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP7 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP7 TXFSTADDR ,IN Endpoint FIFO7 Transmit RAM Start Address" group.long 0x120++0x03 line.long 0x00 "DIEPTXF8 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP8 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP8 TXFSTADDR ,IN Endpoint FIFO8 Transmit RAM Start Address" group.long 0x124++0x03 line.long 0x00 "DIEPTXF9 ,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP9 TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP9 TXFSTADDR ,IN Endpoint FIFO9 Transmit RAM Start Address" group.long 0x128++0x03 line.long 0x00 "DIEPTXF10,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP10TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP10TXFSTADDR ,IN Endpoint FIFO10 Transmit RAM Start Address" group.long 0x12C++0x03 line.long 0x00 "DIEPTXF11,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP11TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP11TXFSTADDR ,IN Endpoint FIFO11 Transmit RAM Start Address" group.long 0x130++0x03 line.long 0x00 "DIEPTXF12,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP12TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP12TXFSTADDR ,IN Endpoint FIFO12 Transmit RAM Start Address" group.long 0x134++0x03 line.long 0x00 "DIEPTXF13,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP13TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP13TXFSTADDR ,IN Endpoint FIFO13 Transmit RAM Start Address" group.long 0x138++0x03 line.long 0x00 "DIEPTXF14,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP14TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP14TXFSTADDR ,IN Endpoint FIFO14 Transmit RAM Start Address" group.long 0x13C++0x03 line.long 0x00 "DIEPTXF15,Device IN Endpoint Transmit FIFO Size Register" hexmask.long.word 0x00 16.--29. 1. " INEP15TXFDEP ,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--15. 1. " INEP15TXFSTADDR ,IN Endpoint FIFO15 Transmit RAM Start Address" tree.end width 12. tree "Host mode registers" if ((((d.l(ad:0xFFB40000+0x014))&0x01)==0x01)&&(((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x0400++0x03 line.long 0x00 "HCFG,Host Configuration Register" bitfld.long 0x00 31. " MODECHTIMEN ,Mode Change Ready Timer Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 26. " PERSCHEDENA ,Enable Periodic Scheduling" "Disabled,Enabled" bitfld.long 0x00 24.--25. " FRLISTEN ,Frame List Entries" ",8,16,32" bitfld.long 0x00 23. " DESCDMA ,Enable Scatter/gather DMA in Host mode" "Disabled,Enabled" textline " " hexmask.long.byte 0x00 8.--15. 1. " RESVALID ,Resume Validation Period" bitfld.long 0x00 7. " ENA32KHZS ,Enable 32 KHz Suspend mode" "Disabled,Enabled" bitfld.long 0x00 2. " FSLSSUPP ,FS-Only Support" "HS/FS/LS,FS/LS" textline " " bitfld.long 0x00 0.--1. " FSLSPCLKSEL ,FS PHY Clock Select" "30/60 MHz,48MHz,6 MHz,?..." elif ((((d.l(ad:0xFFB40000+0x014))&0x01)==0x01)&&(((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)) group.long 0x0400++0x03 line.long 0x00 "HCFG,Host Configuration Register" bitfld.long 0x00 31. " MODECHTIMEN ,Mode Change Ready Timer Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 23. " DESCDMA ,Enable Scatter/gather DMA in Host mode" "Disabled,Enabled" textline " " hexmask.long.byte 0x00 8.--15. 1. " RESVALID ,Resume Validation Period" bitfld.long 0x00 7. " ENA32KHZS ,Enable 32 KHz Suspend mode" "Disabled,Enabled" bitfld.long 0x00 2. " FSLSSUPP ,FS-Only Support" "HS/FS/LS,FS/LS" textline " " bitfld.long 0x00 0.--1. " FSLSPCLKSEL ,FS PHY Clock Select" "30/60 MHz,48MHz,6 MHz,?..." elif (((d.l(ad:0xFFB40000+0x014))&0x01)==0x01) group.long 0x0400++0x03 line.long 0x00 "HCFG,Host Configuration Register" bitfld.long 0x00 31. " MODECHTIMEN ,Mode Change Ready Timer Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 23. " DESCDMA ,Enable Scatter/gather DMA in Host mode" "Disabled,?..." textline " " hexmask.long.byte 0x00 8.--15. 1. " RESVALID ,Resume Validation Period" bitfld.long 0x00 7. " ENA32KHZS ,Enable 32 KHz Suspend mode" "Disabled,Enabled" bitfld.long 0x00 2. " FSLSSUPP ,FS-Only Support" "HS/FS/LS,FS/LS" textline " " bitfld.long 0x00 0.--1. " FSLSPCLKSEL ,FS PHY Clock Select" "30/60 MHz,48MHz,6 MHz,?..." endif if (((d.l(ad:0xFFB40000+0x014))&0x01)==0x01) group.long 0x0404++0x03 line.long 0x00 "HFIR,Host Frame Interval Register" bitfld.long 0x00 16. " HFIRRLDCTRL ,Reload Control" "Disabled,Enabled" hexmask.long.word 0x00 0.--15. 1. " FRINT ,Frame Interval" rgroup.long 0x0408++0x03 line.long 0x00 "HFNUM,Host Frame Number/Frame Time Remaining Register" hexmask.long.word 0x00 16.--31. 1. " FRREM ,Frame Time Remaining" hexmask.long.word 0x00 0.--15. 1. " FRNUM ,Frame Number" rgroup.long 0x0410++0x07 line.long 0x00 "HPTXSTS,Host Periodic Transmit FIFO/Queue Status Register" bitfld.long 0x00 31. " ODDEVNMFRAME ,Odd Even Micro Frame" "Odd,Even" bitfld.long 0x00 27.--30. " CHANENDPT ,Channel Endpoint Number" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x00 25.--26. " TYPE ,Type" "IN/OUT,Zero-length,CSPLIT,Disabled" textline " " bitfld.long 0x00 24. " TERM ,Terminate" "Not terminated,Terminated" hexmask.long.byte 0x00 16.--23. 1. " PTXQSPCAVAIL ,Periodic Transmit Request Queue Space Available" hexmask.long.word 0x00 0.--15. 1. " PTXFSPCAVAIL ,Periodic Transmit Data FIFO Space Available" line.long 0x04 "HAINT,Host All Channels Interrupt Register" bitfld.long 0x04 15. " HAINT_[15] ,Channel 15 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 14. " [14] ,Channel 14 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 13. " [13] ,Channel 13 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 12. " [12] ,Channel 12 Interrupts" "No interrupt,Interrupt" textline " " bitfld.long 0x04 11. " [11] ,Channel 11 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 10. " [10] ,Channel 10 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 9. " [9] ,Channel 9 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 8. " [8] ,Channel 8 Interrupts" "No interrupt,Interrupt" textline " " bitfld.long 0x04 7. " [7] ,Channel 7 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 6. " [6] ,Channel 6 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 5. " [5] ,Channel 5 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 4. " [4] ,Channel 4 Interrupts" "No interrupt,Interrupt" textline " " bitfld.long 0x04 3. " [3] ,Channel 3 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 2. " [2] ,Channel 2 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 1. " [1] ,Channel 1 Interrupts" "No interrupt,Interrupt" bitfld.long 0x04 0. " [0] ,Channel 0 Interrupts" "No interrupt,Interrupt" group.long 0x418++0x07 line.long 0x00 "HAINTMSK,Host All Channels Interrupt Mask Register" bitfld.long 0x00 15. " HAINTMSK_[15] ,Channel 15 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 14. " [14] ,Channel 14 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 13. " [13] ,Channel 13 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 12. " [12] ,Channel 12 Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 11. " [11] ,Channel 11 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 10. " [10] ,Channel 10 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 9. " [9] ,Channel 9 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 8. " [8] ,Channel 8 Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 7. " [7] ,Channel 7 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 6. " [6] ,Channel 6 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 5. " [5] ,Channel 5 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 4. " [4] ,Channel 4 Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 3. " [3] ,Channel 3 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 2. " [2] ,Channel 2 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 1. " [1] ,Channel 1 Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 0. " [0] ,Channel 0 Interrupt Mask" "Masked,Not masked" line.long 0x04 "HFLBADDR,Host Frame List Base Address Register" group.long 0x0440++0x03 line.long 0x00 "HPRT,Host Port Control and Status Register" rbitfld.long 0x00 17.--18. " PRTSPD ,Port Speed" "High speed,Full speed,Low speed,?..." bitfld.long 0x00 13.--16. " PRTTSTCTL ,Port Test Control" "Disabled,Test_J,Test_K,Test_SE0_NAK,Test_Packet,Test_force_Enable,?..." bitfld.long 0x00 12. " PRTPWR ,Port Power" "Off,On" textline " " rbitfld.long 0x00 10.--11. " PRTLNSTS ,Port Line Status" ",D+,D-,?..." bitfld.long 0x00 8. " PRTRST ,Port Reset" "No effect,Reset" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 7. " PRTSUSP ,Port Suspend" "Not suspend mode,Suspend mode" textline " " else rbitfld.long 0x00 7. " PRTSUSP ,Port Suspend" "Not suspend mode,Suspend mode" textline " " endif bitfld.long 0x00 6. " PRTRES ,Port Resume" "No resume,Resume" eventfld.long 0x00 5. " PRTOVRCURRCHNG ,Port Overcurrent Change" "Not occurred,Occurred" rbitfld.long 0x00 4. " PRTOVRCURRACT ,Port Overcurrent Active" "No overcurrent,Overcurrent" textline " " eventfld.long 0x00 3. " PRTENCHNG ,Port Enable/Disable Change" "Disabled,Enabled" rbitfld.long 0x00 2. " PRTENA ,Port Enable" "Disabled,Enabled" eventfld.long 0x00 1. " PRTCONNDET ,Port Connect Detected" "Not detected,Detected" textline " " rbitfld.long 0x00 0. " PRTCONNSTS ,Port Connect Status" "Not attached,Attached" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x500++0x03 "Channel 0" line.long 0x00 "HCCHAR0,Host Channel-0 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x500++0x03 "Channel 0" line.long 0x00 "HCCHAR0,Host Channel-0 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x500++0x03 "Channel 0" line.long 0x00 "HCCHAR0,Host Channel-0 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x500+0x04)++0x03 line.long 0x00 "HCSPLT0,Host Channel 0 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x500+0x08)++0x07 line.long 0x00 "HCINT0,Host Channel-0 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK0,Host Channel-0 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x500+0x08)++0x07 line.long 0x00 "HCINT0,Host Channel-0 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK0,Host Channel-0 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x500+0x08)++0x07 line.long 0x00 "HCINT0,Host Channel-0 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK0,Host Channel-0 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x500+0x10)++0x07 line.long 0x00 "HCTSIZ0,Host Channel-0 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA0,Host Channel 0 DMA Address Register" hgroup.long (0x500+0x18)++0x03 hide.long 0x00 "HCDMAB0,Host Channel 0 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x500+0x10)++0x07 hide.long 0x00 "HCTSIZ0,Host Channel-0 Transfer Size Register" hide.long 0x04 "HCDMA0,Host Channel-n DMA Address Register" group.long (0x500+0x18)++0x03 line.long 0x00 "HCDMAB0,Host Channel 0 DMA Buffer Address Register" else hgroup.long (0x500+0x10)++0x0B hide.long 0x00 "HCTSIZ0,Host Channel-0 Transfer Size Register" hide.long 0x04 "HCDMA0,Host Channel-0 DMA Address Register" hide.long 0x08 "HCDMAB0,Host Channel 0 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x520++0x03 "Channel 1" line.long 0x00 "HCCHAR1,Host Channel-1 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x520++0x03 "Channel 1" line.long 0x00 "HCCHAR1,Host Channel-1 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x520++0x03 "Channel 1" line.long 0x00 "HCCHAR1,Host Channel-1 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x520+0x04)++0x03 line.long 0x00 "HCSPLT1,Host Channel 1 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x520+0x08)++0x07 line.long 0x00 "HCINT1,Host Channel-1 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK1,Host Channel-1 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x520+0x08)++0x07 line.long 0x00 "HCINT1,Host Channel-1 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK1,Host Channel-1 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x520+0x08)++0x07 line.long 0x00 "HCINT1,Host Channel-1 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK1,Host Channel-1 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x520+0x10)++0x07 line.long 0x00 "HCTSIZ1,Host Channel-1 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA1,Host Channel 1 DMA Address Register" hgroup.long (0x520+0x18)++0x03 hide.long 0x00 "HCDMAB1,Host Channel 1 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x520+0x10)++0x07 hide.long 0x00 "HCTSIZ1,Host Channel-1 Transfer Size Register" hide.long 0x04 "HCDMA1,Host Channel-n DMA Address Register" group.long (0x520+0x18)++0x03 line.long 0x00 "HCDMAB1,Host Channel 1 DMA Buffer Address Register" else hgroup.long (0x520+0x10)++0x0B hide.long 0x00 "HCTSIZ1,Host Channel-1 Transfer Size Register" hide.long 0x04 "HCDMA1,Host Channel-1 DMA Address Register" hide.long 0x08 "HCDMAB1,Host Channel 1 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x540++0x03 "Channel 2" line.long 0x00 "HCCHAR2,Host Channel-2 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x540++0x03 "Channel 2" line.long 0x00 "HCCHAR2,Host Channel-2 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x540++0x03 "Channel 2" line.long 0x00 "HCCHAR2,Host Channel-2 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x540+0x04)++0x03 line.long 0x00 "HCSPLT2,Host Channel 2 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x540+0x08)++0x07 line.long 0x00 "HCINT2,Host Channel-2 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK2,Host Channel-2 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x540+0x08)++0x07 line.long 0x00 "HCINT2,Host Channel-2 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK2,Host Channel-2 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x540+0x08)++0x07 line.long 0x00 "HCINT2,Host Channel-2 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK2,Host Channel-2 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x540+0x10)++0x07 line.long 0x00 "HCTSIZ2,Host Channel-2 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA2,Host Channel 2 DMA Address Register" hgroup.long (0x540+0x18)++0x03 hide.long 0x00 "HCDMAB2,Host Channel 2 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x540+0x10)++0x07 hide.long 0x00 "HCTSIZ2,Host Channel-2 Transfer Size Register" hide.long 0x04 "HCDMA2,Host Channel-n DMA Address Register" group.long (0x540+0x18)++0x03 line.long 0x00 "HCDMAB2,Host Channel 2 DMA Buffer Address Register" else hgroup.long (0x540+0x10)++0x0B hide.long 0x00 "HCTSIZ2,Host Channel-2 Transfer Size Register" hide.long 0x04 "HCDMA2,Host Channel-2 DMA Address Register" hide.long 0x08 "HCDMAB2,Host Channel 2 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x560++0x03 "Channel 3" line.long 0x00 "HCCHAR3,Host Channel-3 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x560++0x03 "Channel 3" line.long 0x00 "HCCHAR3,Host Channel-3 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x560++0x03 "Channel 3" line.long 0x00 "HCCHAR3,Host Channel-3 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x560+0x04)++0x03 line.long 0x00 "HCSPLT3,Host Channel 3 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x560+0x08)++0x07 line.long 0x00 "HCINT3,Host Channel-3 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK3,Host Channel-3 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x560+0x08)++0x07 line.long 0x00 "HCINT3,Host Channel-3 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK3,Host Channel-3 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x560+0x08)++0x07 line.long 0x00 "HCINT3,Host Channel-3 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK3,Host Channel-3 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x560+0x10)++0x07 line.long 0x00 "HCTSIZ3,Host Channel-3 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA3,Host Channel 3 DMA Address Register" hgroup.long (0x560+0x18)++0x03 hide.long 0x00 "HCDMAB3,Host Channel 3 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x560+0x10)++0x07 hide.long 0x00 "HCTSIZ3,Host Channel-3 Transfer Size Register" hide.long 0x04 "HCDMA3,Host Channel-n DMA Address Register" group.long (0x560+0x18)++0x03 line.long 0x00 "HCDMAB3,Host Channel 3 DMA Buffer Address Register" else hgroup.long (0x560+0x10)++0x0B hide.long 0x00 "HCTSIZ3,Host Channel-3 Transfer Size Register" hide.long 0x04 "HCDMA3,Host Channel-3 DMA Address Register" hide.long 0x08 "HCDMAB3,Host Channel 3 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x580++0x03 "Channel 4" line.long 0x00 "HCCHAR4,Host Channel-4 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x580++0x03 "Channel 4" line.long 0x00 "HCCHAR4,Host Channel-4 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x580++0x03 "Channel 4" line.long 0x00 "HCCHAR4,Host Channel-4 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x580+0x04)++0x03 line.long 0x00 "HCSPLT4,Host Channel 4 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x580+0x08)++0x07 line.long 0x00 "HCINT4,Host Channel-4 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK4,Host Channel-4 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x580+0x08)++0x07 line.long 0x00 "HCINT4,Host Channel-4 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK4,Host Channel-4 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x580+0x08)++0x07 line.long 0x00 "HCINT4,Host Channel-4 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK4,Host Channel-4 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x580+0x10)++0x07 line.long 0x00 "HCTSIZ4,Host Channel-4 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA4,Host Channel 4 DMA Address Register" hgroup.long (0x580+0x18)++0x03 hide.long 0x00 "HCDMAB4,Host Channel 4 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x580+0x10)++0x07 hide.long 0x00 "HCTSIZ4,Host Channel-4 Transfer Size Register" hide.long 0x04 "HCDMA4,Host Channel-n DMA Address Register" group.long (0x580+0x18)++0x03 line.long 0x00 "HCDMAB4,Host Channel 4 DMA Buffer Address Register" else hgroup.long (0x580+0x10)++0x0B hide.long 0x00 "HCTSIZ4,Host Channel-4 Transfer Size Register" hide.long 0x04 "HCDMA4,Host Channel-4 DMA Address Register" hide.long 0x08 "HCDMAB4,Host Channel 4 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x5A0++0x03 "Channel 5" line.long 0x00 "HCCHAR5,Host Channel-5 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x5A0++0x03 "Channel 5" line.long 0x00 "HCCHAR5,Host Channel-5 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x5A0++0x03 "Channel 5" line.long 0x00 "HCCHAR5,Host Channel-5 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x5A0+0x04)++0x03 line.long 0x00 "HCSPLT5,Host Channel 5 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x5A0+0x08)++0x07 line.long 0x00 "HCINT5,Host Channel-5 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK5,Host Channel-5 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x5A0+0x08)++0x07 line.long 0x00 "HCINT5,Host Channel-5 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK5,Host Channel-5 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x5A0+0x08)++0x07 line.long 0x00 "HCINT5,Host Channel-5 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK5,Host Channel-5 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x5A0+0x10)++0x07 line.long 0x00 "HCTSIZ5,Host Channel-5 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA5,Host Channel 5 DMA Address Register" hgroup.long (0x5A0+0x18)++0x03 hide.long 0x00 "HCDMAB5,Host Channel 5 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x5A0+0x10)++0x07 hide.long 0x00 "HCTSIZ5,Host Channel-5 Transfer Size Register" hide.long 0x04 "HCDMA5,Host Channel-n DMA Address Register" group.long (0x5A0+0x18)++0x03 line.long 0x00 "HCDMAB5,Host Channel 5 DMA Buffer Address Register" else hgroup.long (0x5A0+0x10)++0x0B hide.long 0x00 "HCTSIZ5,Host Channel-5 Transfer Size Register" hide.long 0x04 "HCDMA5,Host Channel-5 DMA Address Register" hide.long 0x08 "HCDMAB5,Host Channel 5 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x5C0++0x03 "Channel 6" line.long 0x00 "HCCHAR6,Host Channel-6 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x5C0++0x03 "Channel 6" line.long 0x00 "HCCHAR6,Host Channel-6 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x5C0++0x03 "Channel 6" line.long 0x00 "HCCHAR6,Host Channel-6 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x5C0+0x04)++0x03 line.long 0x00 "HCSPLT6,Host Channel 6 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x5C0+0x08)++0x07 line.long 0x00 "HCINT6,Host Channel-6 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK6,Host Channel-6 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x5C0+0x08)++0x07 line.long 0x00 "HCINT6,Host Channel-6 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK6,Host Channel-6 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x5C0+0x08)++0x07 line.long 0x00 "HCINT6,Host Channel-6 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK6,Host Channel-6 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x5C0+0x10)++0x07 line.long 0x00 "HCTSIZ6,Host Channel-6 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA6,Host Channel 6 DMA Address Register" hgroup.long (0x5C0+0x18)++0x03 hide.long 0x00 "HCDMAB6,Host Channel 6 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x5C0+0x10)++0x07 hide.long 0x00 "HCTSIZ6,Host Channel-6 Transfer Size Register" hide.long 0x04 "HCDMA6,Host Channel-n DMA Address Register" group.long (0x5C0+0x18)++0x03 line.long 0x00 "HCDMAB6,Host Channel 6 DMA Buffer Address Register" else hgroup.long (0x5C0+0x10)++0x0B hide.long 0x00 "HCTSIZ6,Host Channel-6 Transfer Size Register" hide.long 0x04 "HCDMA6,Host Channel-6 DMA Address Register" hide.long 0x08 "HCDMAB6,Host Channel 6 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x5E0++0x03 "Channel 7" line.long 0x00 "HCCHAR7,Host Channel-7 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x5E0++0x03 "Channel 7" line.long 0x00 "HCCHAR7,Host Channel-7 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x5E0++0x03 "Channel 7" line.long 0x00 "HCCHAR7,Host Channel-7 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x5E0+0x04)++0x03 line.long 0x00 "HCSPLT7,Host Channel 7 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x5E0+0x08)++0x07 line.long 0x00 "HCINT7,Host Channel-7 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK7,Host Channel-7 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x5E0+0x08)++0x07 line.long 0x00 "HCINT7,Host Channel-7 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK7,Host Channel-7 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x5E0+0x08)++0x07 line.long 0x00 "HCINT7,Host Channel-7 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK7,Host Channel-7 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x5E0+0x10)++0x07 line.long 0x00 "HCTSIZ7,Host Channel-7 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA7,Host Channel 7 DMA Address Register" hgroup.long (0x5E0+0x18)++0x03 hide.long 0x00 "HCDMAB7,Host Channel 7 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x5E0+0x10)++0x07 hide.long 0x00 "HCTSIZ7,Host Channel-7 Transfer Size Register" hide.long 0x04 "HCDMA7,Host Channel-n DMA Address Register" group.long (0x5E0+0x18)++0x03 line.long 0x00 "HCDMAB7,Host Channel 7 DMA Buffer Address Register" else hgroup.long (0x5E0+0x10)++0x0B hide.long 0x00 "HCTSIZ7,Host Channel-7 Transfer Size Register" hide.long 0x04 "HCDMA7,Host Channel-7 DMA Address Register" hide.long 0x08 "HCDMAB7,Host Channel 7 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x600++0x03 "Channel 8" line.long 0x00 "HCCHAR8,Host Channel-8 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x600++0x03 "Channel 8" line.long 0x00 "HCCHAR8,Host Channel-8 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x600++0x03 "Channel 8" line.long 0x00 "HCCHAR8,Host Channel-8 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x600+0x04)++0x03 line.long 0x00 "HCSPLT8,Host Channel 8 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x600+0x08)++0x07 line.long 0x00 "HCINT8,Host Channel-8 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK8,Host Channel-8 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x600+0x08)++0x07 line.long 0x00 "HCINT8,Host Channel-8 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK8,Host Channel-8 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x600+0x08)++0x07 line.long 0x00 "HCINT8,Host Channel-8 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK8,Host Channel-8 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x600+0x10)++0x07 line.long 0x00 "HCTSIZ8,Host Channel-8 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA8,Host Channel 8 DMA Address Register" hgroup.long (0x600+0x18)++0x03 hide.long 0x00 "HCDMAB8,Host Channel 8 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x600+0x10)++0x07 hide.long 0x00 "HCTSIZ8,Host Channel-8 Transfer Size Register" hide.long 0x04 "HCDMA8,Host Channel-n DMA Address Register" group.long (0x600+0x18)++0x03 line.long 0x00 "HCDMAB8,Host Channel 8 DMA Buffer Address Register" else hgroup.long (0x600+0x10)++0x0B hide.long 0x00 "HCTSIZ8,Host Channel-8 Transfer Size Register" hide.long 0x04 "HCDMA8,Host Channel-8 DMA Address Register" hide.long 0x08 "HCDMAB8,Host Channel 8 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x620++0x03 "Channel 9" line.long 0x00 "HCCHAR9,Host Channel-9 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x620++0x03 "Channel 9" line.long 0x00 "HCCHAR9,Host Channel-9 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x620++0x03 "Channel 9" line.long 0x00 "HCCHAR9,Host Channel-9 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x620+0x04)++0x03 line.long 0x00 "HCSPLT9,Host Channel 9 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x620+0x08)++0x07 line.long 0x00 "HCINT9,Host Channel-9 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK9,Host Channel-9 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x620+0x08)++0x07 line.long 0x00 "HCINT9,Host Channel-9 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK9,Host Channel-9 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x620+0x08)++0x07 line.long 0x00 "HCINT9,Host Channel-9 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK9,Host Channel-9 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x620+0x10)++0x07 line.long 0x00 "HCTSIZ9,Host Channel-9 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA9,Host Channel 9 DMA Address Register" hgroup.long (0x620+0x18)++0x03 hide.long 0x00 "HCDMAB9,Host Channel 9 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x620+0x10)++0x07 hide.long 0x00 "HCTSIZ9,Host Channel-9 Transfer Size Register" hide.long 0x04 "HCDMA9,Host Channel-n DMA Address Register" group.long (0x620+0x18)++0x03 line.long 0x00 "HCDMAB9,Host Channel 9 DMA Buffer Address Register" else hgroup.long (0x620+0x10)++0x0B hide.long 0x00 "HCTSIZ9,Host Channel-9 Transfer Size Register" hide.long 0x04 "HCDMA9,Host Channel-9 DMA Address Register" hide.long 0x08 "HCDMAB9,Host Channel 9 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x640++0x03 "Channel 10" line.long 0x00 "HCCHAR10,Host Channel-10 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x640++0x03 "Channel 10" line.long 0x00 "HCCHAR10,Host Channel-10 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x640++0x03 "Channel 10" line.long 0x00 "HCCHAR10,Host Channel-10 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x640+0x04)++0x03 line.long 0x00 "HCSPLT10,Host Channel 10 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x640+0x08)++0x07 line.long 0x00 "HCINT10,Host Channel-10 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK10,Host Channel-10 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x640+0x08)++0x07 line.long 0x00 "HCINT10,Host Channel-10 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK10,Host Channel-10 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x640+0x08)++0x07 line.long 0x00 "HCINT10,Host Channel-10 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK10,Host Channel-10 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x640+0x10)++0x07 line.long 0x00 "HCTSIZ10,Host Channel-10 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA10,Host Channel 10 DMA Address Register" hgroup.long (0x640+0x18)++0x03 hide.long 0x00 "HCDMAB10,Host Channel 10 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x640+0x10)++0x07 hide.long 0x00 "HCTSIZ10,Host Channel-10 Transfer Size Register" hide.long 0x04 "HCDMA10,Host Channel-n DMA Address Register" group.long (0x640+0x18)++0x03 line.long 0x00 "HCDMAB10,Host Channel 10 DMA Buffer Address Register" else hgroup.long (0x640+0x10)++0x0B hide.long 0x00 "HCTSIZ10,Host Channel-10 Transfer Size Register" hide.long 0x04 "HCDMA10,Host Channel-10 DMA Address Register" hide.long 0x08 "HCDMAB10,Host Channel 10 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x660++0x03 "Channel 11" line.long 0x00 "HCCHAR11,Host Channel-11 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x660++0x03 "Channel 11" line.long 0x00 "HCCHAR11,Host Channel-11 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x660++0x03 "Channel 11" line.long 0x00 "HCCHAR11,Host Channel-11 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x660+0x04)++0x03 line.long 0x00 "HCSPLT11,Host Channel 11 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x660+0x08)++0x07 line.long 0x00 "HCINT11,Host Channel-11 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK11,Host Channel-11 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x660+0x08)++0x07 line.long 0x00 "HCINT11,Host Channel-11 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK11,Host Channel-11 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x660+0x08)++0x07 line.long 0x00 "HCINT11,Host Channel-11 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK11,Host Channel-11 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x660+0x10)++0x07 line.long 0x00 "HCTSIZ11,Host Channel-11 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA11,Host Channel 11 DMA Address Register" hgroup.long (0x660+0x18)++0x03 hide.long 0x00 "HCDMAB11,Host Channel 11 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x660+0x10)++0x07 hide.long 0x00 "HCTSIZ11,Host Channel-11 Transfer Size Register" hide.long 0x04 "HCDMA11,Host Channel-n DMA Address Register" group.long (0x660+0x18)++0x03 line.long 0x00 "HCDMAB11,Host Channel 11 DMA Buffer Address Register" else hgroup.long (0x660+0x10)++0x0B hide.long 0x00 "HCTSIZ11,Host Channel-11 Transfer Size Register" hide.long 0x04 "HCDMA11,Host Channel-11 DMA Address Register" hide.long 0x08 "HCDMAB11,Host Channel 11 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x680++0x03 "Channel 12" line.long 0x00 "HCCHAR12,Host Channel-12 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x680++0x03 "Channel 12" line.long 0x00 "HCCHAR12,Host Channel-12 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x680++0x03 "Channel 12" line.long 0x00 "HCCHAR12,Host Channel-12 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x680+0x04)++0x03 line.long 0x00 "HCSPLT12,Host Channel 12 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x680+0x08)++0x07 line.long 0x00 "HCINT12,Host Channel-12 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK12,Host Channel-12 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x680+0x08)++0x07 line.long 0x00 "HCINT12,Host Channel-12 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK12,Host Channel-12 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x680+0x08)++0x07 line.long 0x00 "HCINT12,Host Channel-12 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK12,Host Channel-12 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x680+0x10)++0x07 line.long 0x00 "HCTSIZ12,Host Channel-12 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA12,Host Channel 12 DMA Address Register" hgroup.long (0x680+0x18)++0x03 hide.long 0x00 "HCDMAB12,Host Channel 12 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x680+0x10)++0x07 hide.long 0x00 "HCTSIZ12,Host Channel-12 Transfer Size Register" hide.long 0x04 "HCDMA12,Host Channel-n DMA Address Register" group.long (0x680+0x18)++0x03 line.long 0x00 "HCDMAB12,Host Channel 12 DMA Buffer Address Register" else hgroup.long (0x680+0x10)++0x0B hide.long 0x00 "HCTSIZ12,Host Channel-12 Transfer Size Register" hide.long 0x04 "HCDMA12,Host Channel-12 DMA Address Register" hide.long 0x08 "HCDMAB12,Host Channel 12 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x6A0++0x03 "Channel 13" line.long 0x00 "HCCHAR13,Host Channel-13 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x6A0++0x03 "Channel 13" line.long 0x00 "HCCHAR13,Host Channel-13 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x6A0++0x03 "Channel 13" line.long 0x00 "HCCHAR13,Host Channel-13 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x6A0+0x04)++0x03 line.long 0x00 "HCSPLT13,Host Channel 13 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x6A0+0x08)++0x07 line.long 0x00 "HCINT13,Host Channel-13 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK13,Host Channel-13 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x6A0+0x08)++0x07 line.long 0x00 "HCINT13,Host Channel-13 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK13,Host Channel-13 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x6A0+0x08)++0x07 line.long 0x00 "HCINT13,Host Channel-13 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK13,Host Channel-13 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x6A0+0x10)++0x07 line.long 0x00 "HCTSIZ13,Host Channel-13 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA13,Host Channel 13 DMA Address Register" hgroup.long (0x6A0+0x18)++0x03 hide.long 0x00 "HCDMAB13,Host Channel 13 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x6A0+0x10)++0x07 hide.long 0x00 "HCTSIZ13,Host Channel-13 Transfer Size Register" hide.long 0x04 "HCDMA13,Host Channel-n DMA Address Register" group.long (0x6A0+0x18)++0x03 line.long 0x00 "HCDMAB13,Host Channel 13 DMA Buffer Address Register" else hgroup.long (0x6A0+0x10)++0x0B hide.long 0x00 "HCTSIZ13,Host Channel-13 Transfer Size Register" hide.long 0x04 "HCDMA13,Host Channel-13 DMA Address Register" hide.long 0x08 "HCDMAB13,Host Channel 13 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x6C0++0x03 "Channel 14" line.long 0x00 "HCCHAR14,Host Channel-14 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x6C0++0x03 "Channel 14" line.long 0x00 "HCCHAR14,Host Channel-14 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x6C0++0x03 "Channel 14" line.long 0x00 "HCCHAR14,Host Channel-14 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x6C0+0x04)++0x03 line.long 0x00 "HCSPLT14,Host Channel 14 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x6C0+0x08)++0x07 line.long 0x00 "HCINT14,Host Channel-14 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK14,Host Channel-14 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x6C0+0x08)++0x07 line.long 0x00 "HCINT14,Host Channel-14 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK14,Host Channel-14 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x6C0+0x08)++0x07 line.long 0x00 "HCINT14,Host Channel-14 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK14,Host Channel-14 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x6C0+0x10)++0x07 line.long 0x00 "HCTSIZ14,Host Channel-14 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA14,Host Channel 14 DMA Address Register" hgroup.long (0x6C0+0x18)++0x03 hide.long 0x00 "HCDMAB14,Host Channel 14 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x6C0+0x10)++0x07 hide.long 0x00 "HCTSIZ14,Host Channel-14 Transfer Size Register" hide.long 0x04 "HCDMA14,Host Channel-n DMA Address Register" group.long (0x6C0+0x18)++0x03 line.long 0x00 "HCDMAB14,Host Channel 14 DMA Buffer Address Register" else hgroup.long (0x6C0+0x10)++0x0B hide.long 0x00 "HCTSIZ14,Host Channel-14 Transfer Size Register" hide.long 0x04 "HCDMA14,Host Channel-14 DMA Address Register" hide.long 0x08 "HCDMAB14,Host Channel 14 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x6E0++0x03 "Channel 15" line.long 0x00 "HCCHAR15,Host Channel-15 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Descriptor structure ready" "Not ready,Ready" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" elif (((d.l(ad:0xFFB40000+0x08))&0x20)==0x20) group.long 0x6E0++0x03 "Channel 15" line.long 0x00 "HCCHAR15,Host Channel-15 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" bitfld.long 0x00 20.--21. " MC_EC ,Multi Count / Error Count" ",1 transaction,2 transactions,3 transactions" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x6E0++0x03 "Channel 15" line.long 0x00 "HCCHAR15,Host Channel-15 Characteristics Register" rbitfld.long 0x00 31. " CHENA ,Channel Enable" "Disabled,Enabled" rbitfld.long 0x00 30. " CHDIS ,Channel Disable" "No,Yes" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 29. " ODDFRM ,Odd Frame" "Even frame,Odd frame" textline " " endif hexmask.long.byte 0x00 22.--28. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" bitfld.long 0x00 17. " LSPDDEV ,Low-Speed Device" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EPDIR ,Endpoint Direction" "Out,In" bitfld.long 0x00 11.--14. " EPNUM ,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif group.long (0x6E0+0x04)++0x03 line.long 0x00 "HCSPLT15,Host Channel 15 Split Control Register" bitfld.long 0x00 31. " SPLTENA ,Split Enable" "Disabled,Enabled" bitfld.long 0x00 16. " COMPSPLT ,Do Complete Split" "Not splitted,Splitted" bitfld.long 0x00 14.--15. " XACTPOS ,Transaction Position" "Middle,End,Begin,All" textline " " hexmask.long.byte 0x00 7.--13. 0x80 " HUBADDR ,Hub Address" hexmask.long.byte 0x00 0.--6. 1. " PRTADDR ,Port Address" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x6E0+0x08)++0x07 line.long 0x00 "HCINT15,Host Channel-15 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" bitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " else rbitfld.long 0x00 13. " DESC_LST_ROLLINTR ,Descriptor rollover interrupt" "No interrupt,Interrupt" rbitfld.long 0x00 12. " XCS_XACT_ERR ,Excessive Transaction Error" "Not occurred,Occurred" rbitfld.long 0x00 11. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK15,Host Channel-15 Interrupt Mask Register" bitfld.long 0x04 13. " FRM_LST_ROLLINTRMSK ,Framelist Rollover Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 11. " BNAINTRMSK ,BNA (Buffer Not Available) Interrupt mask register" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x6E0+0x08)++0x07 line.long 0x00 "HCINT15,Host Channel-15 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK15,Host Channel-15 Interrupt Mask Register" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" else group.long (0x6E0+0x08)++0x07 line.long 0x00 "HCINT15,Host Channel-15 Interrupt Register" eventfld.long 0x00 10. " DATATGLERR ,Data Toggle Error" "Not occurred,Occurred" eventfld.long 0x00 9. " FRMOVRUN ,Frame Overrun" "Not occurred,Occurred" eventfld.long 0x00 8. " BBLERR ,Babble Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 7. " XACTERR ,Transaction Error" "Not occurred,Occurred" eventfld.long 0x00 6. " NYET ,NYET Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 5. " ACK ,ACK Response Received/Transmitted Interrupt" "No interrupt,Interrupt" textline " " eventfld.long 0x00 4. " NAK ,NAK Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 3. " STALL ,STALL Response Received Interrupt" "No interrupt,Interrupt" eventfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " eventfld.long 0x00 1. " CHHITD ,Channel Halted" "Not occurred,Occurred" eventfld.long 0x00 0. " XFERCOMPL ,Transfer Completed" "Not completed,Completed" line.long 0x04 "HCINTMSK15,Host Channel-15 Interrupt Mask Register" bitfld.long 0x04 1. " CHHLTDMSK ,Channel Halted Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Mask" "Masked,Not masked" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x00)) group.long (0x6E0+0x10)++0x07 line.long 0x00 "HCTSIZ15,Host Channel-15 Transfer Size Register" bitfld.long 0x00 31. " DOPNG ,Do Ping" "No ping,Ping" bitfld.long 0x00 29.--30. " PID ,PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" textline " " hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" line.long 0x04 "HCDMA15,Host Channel 15 DMA Address Register" hgroup.long (0x6E0+0x18)++0x03 hide.long 0x00 "HCDMAB15,Host Channel 15 DMA Buffer Address Register" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) hgroup.long (0x6E0+0x10)++0x07 hide.long 0x00 "HCTSIZ15,Host Channel-15 Transfer Size Register" hide.long 0x04 "HCDMA15,Host Channel-n DMA Address Register" group.long (0x6E0+0x18)++0x03 line.long 0x00 "HCDMAB15,Host Channel 15 DMA Buffer Address Register" else hgroup.long (0x6E0+0x10)++0x0B hide.long 0x00 "HCTSIZ15,Host Channel-15 Transfer Size Register" hide.long 0x04 "HCDMA15,Host Channel-15 DMA Address Register" hide.long 0x08 "HCDMAB15,Host Channel 15 DMA Buffer Address Register" endif else hgroup.long 0x0400++0x0B hide.long 0x00 "HCFG,Host Configuration Register" hide.long 0x04 "HFIR,Host Frame Interval Register" hide.long 0x08 "HFNUM,Host Frame Number/Frame Time Remaining Register" hgroup.long 0x0410++0x0F hide.long 0x00 "HPTXSTS,Host Periodic Transmit FIFO/Queue Status Register" hide.long 0x04 "HAINT,Host All Channels Interrupt Register" hide.long 0x08 "HAINTMSK,Host All Channels Interrupt Mask Register" hide.long 0x0C "HFLBADDR,Host Frame List Base Address Register" hgroup.long 0x0440++0x03 hide.long 0x00 "HPRT,Host Port Control and Status Register" hgroup.long 0x500++0x03 "Channel 0" hide.long 0x00 "HCCHAR0,Host Channel-0 Characteristics Register" hgroup.long (0x500+0x08)++0x07 hide.long 0x00 "HCINT0,Host Channel-0 Interrupt Register" hide.long 0x04 "HCINTMSK0,Host Channel-0 Interrupt Mask Register" hgroup.long (0x500+0x10)++0x07 hide.long 0x00 "HCTSIZ0,Host Channel-0 Transfer Size Register" hide.long 0x04 "HCDMA0,Host Channel-n DMA Address Register" hgroup.long (0x500+0x18)++0x03 hide.long 0x00 "HCDMAB0,Host Channel-0 DMA Buffer Address Register" hgroup.long 0x520++0x03 "Channel 1" hide.long 0x00 "HCCHAR1,Host Channel-1 Characteristics Register" hgroup.long (0x520+0x08)++0x07 hide.long 0x00 "HCINT1,Host Channel-1 Interrupt Register" hide.long 0x04 "HCINTMSK1,Host Channel-1 Interrupt Mask Register" hgroup.long (0x520+0x10)++0x07 hide.long 0x00 "HCTSIZ1,Host Channel-1 Transfer Size Register" hide.long 0x04 "HCDMA1,Host Channel-n DMA Address Register" hgroup.long (0x520+0x18)++0x03 hide.long 0x00 "HCDMAB1,Host Channel-1 DMA Buffer Address Register" hgroup.long 0x540++0x03 "Channel 2" hide.long 0x00 "HCCHAR2,Host Channel-2 Characteristics Register" hgroup.long (0x540+0x08)++0x07 hide.long 0x00 "HCINT2,Host Channel-2 Interrupt Register" hide.long 0x04 "HCINTMSK2,Host Channel-2 Interrupt Mask Register" hgroup.long (0x540+0x10)++0x07 hide.long 0x00 "HCTSIZ2,Host Channel-2 Transfer Size Register" hide.long 0x04 "HCDMA2,Host Channel-n DMA Address Register" hgroup.long (0x540+0x18)++0x03 hide.long 0x00 "HCDMAB2,Host Channel-2 DMA Buffer Address Register" hgroup.long 0x560++0x03 "Channel 3" hide.long 0x00 "HCCHAR3,Host Channel-3 Characteristics Register" hgroup.long (0x560+0x08)++0x07 hide.long 0x00 "HCINT3,Host Channel-3 Interrupt Register" hide.long 0x04 "HCINTMSK3,Host Channel-3 Interrupt Mask Register" hgroup.long (0x560+0x10)++0x07 hide.long 0x00 "HCTSIZ3,Host Channel-3 Transfer Size Register" hide.long 0x04 "HCDMA3,Host Channel-n DMA Address Register" hgroup.long (0x560+0x18)++0x03 hide.long 0x00 "HCDMAB3,Host Channel-3 DMA Buffer Address Register" hgroup.long 0x580++0x03 "Channel 4" hide.long 0x00 "HCCHAR4,Host Channel-4 Characteristics Register" hgroup.long (0x580+0x08)++0x07 hide.long 0x00 "HCINT4,Host Channel-4 Interrupt Register" hide.long 0x04 "HCINTMSK4,Host Channel-4 Interrupt Mask Register" hgroup.long (0x580+0x10)++0x07 hide.long 0x00 "HCTSIZ4,Host Channel-4 Transfer Size Register" hide.long 0x04 "HCDMA4,Host Channel-n DMA Address Register" hgroup.long (0x580+0x18)++0x03 hide.long 0x00 "HCDMAB4,Host Channel-4 DMA Buffer Address Register" hgroup.long 0x5A0++0x03 "Channel 5" hide.long 0x00 "HCCHAR5,Host Channel-5 Characteristics Register" hgroup.long (0x5A0+0x08)++0x07 hide.long 0x00 "HCINT5,Host Channel-5 Interrupt Register" hide.long 0x04 "HCINTMSK5,Host Channel-5 Interrupt Mask Register" hgroup.long (0x5A0+0x10)++0x07 hide.long 0x00 "HCTSIZ5,Host Channel-5 Transfer Size Register" hide.long 0x04 "HCDMA5,Host Channel-n DMA Address Register" hgroup.long (0x5A0+0x18)++0x03 hide.long 0x00 "HCDMAB5,Host Channel-5 DMA Buffer Address Register" hgroup.long 0x5C0++0x03 "Channel 6" hide.long 0x00 "HCCHAR6,Host Channel-6 Characteristics Register" hgroup.long (0x5C0+0x08)++0x07 hide.long 0x00 "HCINT6,Host Channel-6 Interrupt Register" hide.long 0x04 "HCINTMSK6,Host Channel-6 Interrupt Mask Register" hgroup.long (0x5C0+0x10)++0x07 hide.long 0x00 "HCTSIZ6,Host Channel-6 Transfer Size Register" hide.long 0x04 "HCDMA6,Host Channel-n DMA Address Register" hgroup.long (0x5C0+0x18)++0x03 hide.long 0x00 "HCDMAB6,Host Channel-6 DMA Buffer Address Register" hgroup.long 0x5E0++0x03 "Channel 7" hide.long 0x00 "HCCHAR7,Host Channel-7 Characteristics Register" hgroup.long (0x5E0+0x08)++0x07 hide.long 0x00 "HCINT7,Host Channel-7 Interrupt Register" hide.long 0x04 "HCINTMSK7,Host Channel-7 Interrupt Mask Register" hgroup.long (0x5E0+0x10)++0x07 hide.long 0x00 "HCTSIZ7,Host Channel-7 Transfer Size Register" hide.long 0x04 "HCDMA7,Host Channel-n DMA Address Register" hgroup.long (0x5E0+0x18)++0x03 hide.long 0x00 "HCDMAB7,Host Channel-7 DMA Buffer Address Register" hgroup.long 0x600++0x03 "Channel 8" hide.long 0x00 "HCCHAR8,Host Channel-8 Characteristics Register" hgroup.long (0x600+0x08)++0x07 hide.long 0x00 "HCINT8,Host Channel-8 Interrupt Register" hide.long 0x04 "HCINTMSK8,Host Channel-8 Interrupt Mask Register" hgroup.long (0x600+0x10)++0x07 hide.long 0x00 "HCTSIZ8,Host Channel-8 Transfer Size Register" hide.long 0x04 "HCDMA8,Host Channel-n DMA Address Register" hgroup.long (0x600+0x18)++0x03 hide.long 0x00 "HCDMAB8,Host Channel-8 DMA Buffer Address Register" hgroup.long 0x620++0x03 "Channel 9" hide.long 0x00 "HCCHAR9,Host Channel-9 Characteristics Register" hgroup.long (0x620+0x08)++0x07 hide.long 0x00 "HCINT9,Host Channel-9 Interrupt Register" hide.long 0x04 "HCINTMSK9,Host Channel-9 Interrupt Mask Register" hgroup.long (0x620+0x10)++0x07 hide.long 0x00 "HCTSIZ9,Host Channel-9 Transfer Size Register" hide.long 0x04 "HCDMA9,Host Channel-n DMA Address Register" hgroup.long (0x620+0x18)++0x03 hide.long 0x00 "HCDMAB9,Host Channel-9 DMA Buffer Address Register" hgroup.long 0x640++0x03 "Channel 10" hide.long 0x00 "HCCHAR10,Host Channel-10 Characteristics Register" hgroup.long (0x640+0x08)++0x07 hide.long 0x00 "HCINT10,Host Channel-10 Interrupt Register" hide.long 0x04 "HCINTMSK10,Host Channel-10 Interrupt Mask Register" hgroup.long (0x640+0x10)++0x07 hide.long 0x00 "HCTSIZ10,Host Channel-10 Transfer Size Register" hide.long 0x04 "HCDMA10,Host Channel-n DMA Address Register" hgroup.long (0x640+0x18)++0x03 hide.long 0x00 "HCDMAB10,Host Channel-10 DMA Buffer Address Register" hgroup.long 0x660++0x03 "Channel 11" hide.long 0x00 "HCCHAR11,Host Channel-11 Characteristics Register" hgroup.long (0x660+0x08)++0x07 hide.long 0x00 "HCINT11,Host Channel-11 Interrupt Register" hide.long 0x04 "HCINTMSK11,Host Channel-11 Interrupt Mask Register" hgroup.long (0x660+0x10)++0x07 hide.long 0x00 "HCTSIZ11,Host Channel-11 Transfer Size Register" hide.long 0x04 "HCDMA11,Host Channel-n DMA Address Register" hgroup.long (0x660+0x18)++0x03 hide.long 0x00 "HCDMAB11,Host Channel-11 DMA Buffer Address Register" hgroup.long 0x680++0x03 "Channel 12" hide.long 0x00 "HCCHAR12,Host Channel-12 Characteristics Register" hgroup.long (0x680+0x08)++0x07 hide.long 0x00 "HCINT12,Host Channel-12 Interrupt Register" hide.long 0x04 "HCINTMSK12,Host Channel-12 Interrupt Mask Register" hgroup.long (0x680+0x10)++0x07 hide.long 0x00 "HCTSIZ12,Host Channel-12 Transfer Size Register" hide.long 0x04 "HCDMA12,Host Channel-n DMA Address Register" hgroup.long (0x680+0x18)++0x03 hide.long 0x00 "HCDMAB12,Host Channel-12 DMA Buffer Address Register" hgroup.long 0x6A0++0x03 "Channel 13" hide.long 0x00 "HCCHAR13,Host Channel-13 Characteristics Register" hgroup.long (0x6A0+0x08)++0x07 hide.long 0x00 "HCINT13,Host Channel-13 Interrupt Register" hide.long 0x04 "HCINTMSK13,Host Channel-13 Interrupt Mask Register" hgroup.long (0x6A0+0x10)++0x07 hide.long 0x00 "HCTSIZ13,Host Channel-13 Transfer Size Register" hide.long 0x04 "HCDMA13,Host Channel-n DMA Address Register" hgroup.long (0x6A0+0x18)++0x03 hide.long 0x00 "HCDMAB13,Host Channel-13 DMA Buffer Address Register" hgroup.long 0x6C0++0x03 "Channel 14" hide.long 0x00 "HCCHAR14,Host Channel-14 Characteristics Register" hgroup.long (0x6C0+0x08)++0x07 hide.long 0x00 "HCINT14,Host Channel-14 Interrupt Register" hide.long 0x04 "HCINTMSK14,Host Channel-14 Interrupt Mask Register" hgroup.long (0x6C0+0x10)++0x07 hide.long 0x00 "HCTSIZ14,Host Channel-14 Transfer Size Register" hide.long 0x04 "HCDMA14,Host Channel-n DMA Address Register" hgroup.long (0x6C0+0x18)++0x03 hide.long 0x00 "HCDMAB14,Host Channel-14 DMA Buffer Address Register" hgroup.long 0x6E0++0x03 "Channel 15" hide.long 0x00 "HCCHAR15,Host Channel-15 Characteristics Register" hgroup.long (0x6E0+0x08)++0x07 hide.long 0x00 "HCINT15,Host Channel-15 Interrupt Register" hide.long 0x04 "HCINTMSK15,Host Channel-15 Interrupt Mask Register" hgroup.long (0x6E0+0x10)++0x07 hide.long 0x00 "HCTSIZ15,Host Channel-15 Transfer Size Register" hide.long 0x04 "HCDMA15,Host Channel-n DMA Address Register" hgroup.long (0x6E0+0x18)++0x03 hide.long 0x00 "HCDMAB15,Host Channel-15 DMA Buffer Address Register" endif tree.end width 12. tree "Device mode registers" if (((d.l(ad:0xFFB40000+0x014))&0x01)==0x00) group.long 0x0800++0x03 line.long 0x00 "DCFG,Device Configuration Register" bitfld.long 0x00 26.--31. " RESVALID ,Resume Validation Period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 24.--25. " PERSCHINTVL ,Periodic Scheduling Interval" "25%,50%,75%,?..." bitfld.long 0x00 23. " DESCDMA ,Enable Scatter/Gather DMA in Device mode" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " ERRATICINTMSK ,Erratic Error Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 14. " XCVRDLY ,Delay between xcvr_sel and txvalid during Device chirp Enable" "Disabled,Enabled" textline " " endif bitfld.long 0x00 13. " ENDEVOUTNAK ,Enable Device OUT NAK" "Disabled,Enabled" bitfld.long 0x00 11.--12. " PERFRINT ,Periodic Frame Interval" "80%,85%,90%,95%" hexmask.long.byte 0x00 4.--10. 1. " DEVADDR ,Device Address" textline " " bitfld.long 0x00 3. " ENA32KHZSUSP ,Enable 32 KHz Suspend mode" "Disabled,Enabled" bitfld.long 0x00 2. " NZSTSOUTHSHK ,Non-Zero-Length Status OUT Handshake" "Out,Stall" bitfld.long 0x00 0.--1. " DEVSPD ,Device Speed" "High speed USB 2.0 PHY,Full speed USB 2.0 PHY,Low speed USB 1.1,Full speed USB 1.1" else hgroup.long 0x0800++0x03 hide.long 0x00 "DCFG,Device Configuration Register" endif if ((((d.l(ad:0xFFB40000+0x014))&0x01)==0x00)&&(((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long 0x0804++0x03 line.long 0x00 "DCTL,Device Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 17. " ENCONTONBNA ,Enable Continue on BNA" "Disabled,Enabled" textline " " endif bitfld.long 0x00 16. " NAKONBBLE ,Set NAK automatically on babble" "No effect,Set" bitfld.long 0x00 15. " IGNRFRMNUM ,Ignore frame number for isochronous endpoints in case of Scatter/Gather DMA" "Disabled,Enabled" bitfld.long 0x00 13.--14. " GMC ,Global Multi Count" "Invalid,1 packet,2 packets,3 packets" textline " " bitfld.long 0x00 11. " PWRONPRGDONE ,Power-On Programming Done" "Not done,Done" bitfld.long 0x00 10. " CGOUTNAK ,Clear Global OUT NAK" "No effect,Clear" bitfld.long 0x00 9. " SGOUTNAK ,Set Global OUT NAK" "No effect,Set" textline " " bitfld.long 0x00 8. " CGNPINNAK ,Clear Global Non-periodic IN NAK" "No effect,Clear" bitfld.long 0x00 7. " SGNPINNAK ,Set Global Non-periodic IN NAK" "No effect,Set" bitfld.long 0x00 4.--6. " TSTCTL ,Test Control" "Disabled,Test_J,Test_K,Test_SE0_NAK,Test_Packet,Test_Force_Enable,?..." textline " " rbitfld.long 0x00 3. " GOUTNAKSTS ,Global OUT NAK Status" "Low,High" rbitfld.long 0x00 2. " GNPINNAKSTS ,Global Non-periodic IN NAK Status" "Low,High" bitfld.long 0x00 1. " SFTDISCON ,Soft Disconnect" "Connected,Not connected" textline " " bitfld.long 0x00 0. " RMTWKUPSIG ,Remote Wakeup Signaling" "Low,High" elif (((d.l(ad:0xFFB40000+0x014))&0x01)==0x00) group.long 0x0804++0x03 line.long 0x00 "DCTL,Device Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 17. " ENCONTONBNA ,Enable Continue on BNA" "Disabled,Enabled" textline " " endif bitfld.long 0x00 16. " NAKONBBLE ,Set NAK automatically on babble" "No effect,Set" bitfld.long 0x00 15. " IGNRFRMNUM ,Ignore frame number for isochronous endpoints in case of Scatter/Gather DMA" "Disabled,Enabled" textline " " bitfld.long 0x00 11. " PWRONPRGDONE ,Power-On Programming Done" "Not done,Done" bitfld.long 0x00 10. " CGOUTNAK ,Clear Global OUT NAK" "No effect,Clear" bitfld.long 0x00 9. " SGOUTNAK ,Set Global OUT NAK" "No effect,Set" textline " " bitfld.long 0x00 8. " CGNPINNAK ,Clear Global Non-periodic IN NAK" "No effect,Clear" bitfld.long 0x00 7. " SGNPINNAK ,Set Global Non-periodic IN NAK" "No effect,Set" bitfld.long 0x00 4.--6. " TSTCTL ,Test Control" "Disabled,Test_J,Test_K,Test_SE0_NAK,Test_Packet,Test_Force_Enable,?..." textline " " rbitfld.long 0x00 3. " GOUTNAKSTS ,Global OUT NAK Status" "Low,High" rbitfld.long 0x00 2. " GNPINNAKSTS ,Global Non-periodic IN NAK Status" "Low,High" bitfld.long 0x00 1. " SFTDISCON ,Soft Disconnect" "Connected,Not connected" textline " " bitfld.long 0x00 0. " RMTWKUPSIG ,Remote Wakeup Signaling" "Low,High" else hgroup.long 0x0804++0x03 hide.long 0x04 "DCTL,Device Control Register" endif if (((d.l(ad:0xFFB40000+0x014))&0x01)==0x00) rgroup.long 0x0808++0x03 line.long 0x00 "DSTS,Device Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 23. " DEVLNSTS[1] ,Device Line D+ Status" "Low,High" bitfld.long 0x00 22. " [0] ,Device Line D- Status" "Low,High" textline " " endif hexmask.long.word 0x00 8.--21. 1. " SOFFN ,Frame Number of the Received SOF" bitfld.long 0x00 3. " ERRTICERR ,Erratic Error" "Not occurred,Occurred" bitfld.long 0x00 1.--2. " ENUMSPD ,Enumerated Speed" "High speed,Full speed,Low speed,Full speed" textline " " bitfld.long 0x00 0. " SUSPSTS ,Suspend Status" "Not detected,Detected" group.long 0x0810++0x07 line.long 0x00 "DIEPMSK,Device IN Endpoint Common Interrupt Mask Register" bitfld.long 0x00 13. " NAKMSK ,NAK interrupt Mask" "Masked,Not masked" bitfld.long 0x00 9. " BNAININTRMSK ,BNA Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 8. " TXFIFOUNDRNMSK ,Fifo Underrun Mask" "Masked,Not masked" bitfld.long 0x00 6. " INEPNAKEFFMSK ,IN Endpoint NAK Effective Mask" "Masked,Not masked" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " INTKNEPMISMSK ,IN Token received with EP Mismatch Interrupt Mask" "Masked,Not masked" textline " " endif bitfld.long 0x00 4. " INTKNTXFEMPMSK ,IN Token Received When TxFIFO Empty Mask" "Masked,Not masked" bitfld.long 0x00 3. " TIMEOUTMSK ,Timeout Condition Mask" "Masked,Not masked" bitfld.long 0x00 2. " AHBERRMSK ,AHB Error Mask" "Masked,Not masked" textline " " bitfld.long 0x00 1. " EPDISBLDMSK ,Endpoint Disabled Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 0. " XFERCOMPLMSK ,Transfer Completed Interrupt Mask" "Masked,Not masked" line.long 0x04 "DOEPMSK,Device OUT Endpoint Common Interrupt Mask Register" bitfld.long 0x04 14. " NYETMSK ,NYET Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 13. " NAKMSK ,NAK Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 12. " BBLEERRMSK ,Babble Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x04 9. " BNAOUTINTRMSK ,BNA interrupt Mask" "Masked,Not masked" bitfld.long 0x04 8. " OUTPKTERRMSK ,OUT Packet Error Mask" "Masked,Not masked" bitfld.long 0x04 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received Mask" "Masked,Not masked" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x04 5. " STSPHSERCVDMSK ,Status Phase Received Mask" "Masked,Not masked" textline " " endif bitfld.long 0x04 4. " OUTTKNEPDISMSK ,OUT Token Received when Endpoint Disabled Mask" "Masked,Not masked" bitfld.long 0x04 3. " SETUPMSK ,SETUP Phase Done Mask" "Masked,Not masked" bitfld.long 0x04 2. " AHBERRMSK ,AHB Error" "Masked,Not masked" textline " " bitfld.long 0x04 1. " EPDISBLDMSK ,Endpoint Disabled Interrupt Mask" "Masked,Not masked" bitfld.long 0x04 0. " XFERCOMPLMSK ,Transfer Completed Interrupt Mask" "Masked,Not masked" rgroup.long 0x0818++0x03 line.long 0x00 "DAINT,Device All Endpoints Interrupt Register" bitfld.long 0x00 31. " OUTEPINT[15] ,OUT Endpoint 15 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 30. " [14] ,OUT Endpoint 14 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 29. " [13] ,OUT Endpoint 13 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 28. " [12] ,OUT Endpoint 12 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 27. " [11] ,OUT Endpoint 11 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 26. " [10] ,OUT Endpoint 10 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 25. " [9] ,OUT Endpoint 9 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 24. " [8] ,OUT Endpoint 8 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 23. " [7] ,OUT Endpoint 7 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 22. " [6] ,OUT Endpoint 6 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 21. " [5] ,OUT Endpoint 5 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 20. " [4] ,OUT Endpoint 4 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 19. " [3] ,OUT Endpoint 3 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 18. " [2] ,OUT Endpoint 2 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 17. " [1] ,OUT Endpoint 1 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 16. " [0] ,OUT Endpoint 0 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 15. " INEPINT[15] ,IN Endpoint 15 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 14. " [14] ,IN Endpoint 14 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 13. " [13] ,IN Endpoint 13 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 12. " [12] ,IN Endpoint 12 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " [11] ,IN Endpoint 11 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 10. " [10] ,IN Endpoint 10 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 9. " [9] ,IN Endpoint 9 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 8. " [8] ,IN Endpoint 8 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " [7] ,IN Endpoint 7 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 6. " [6] ,IN Endpoint 6 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 5. " [5] ,IN Endpoint 5 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 4. " [4] ,IN Endpoint 4 Interrupt Bit" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " [3] ,IN Endpoint 3 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 2. " [2] ,IN Endpoint 2 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 1. " [1] ,IN Endpoint 1 Interrupt Bit" "No interrupt,Interrupt" bitfld.long 0x00 0. " [0] ,IN Endpoint 0 Interrupt Bit" "No interrupt,Interrupt" group.long 0x081C++0x03 line.long 0x00 "DAINTMSK,Device All Endpoints Interrupt Mask Register" bitfld.long 0x00 31. " OUTEPMSK[15] ,OUT Endpoint 15 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 30. " [14] ,OUT Endpoint 14 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 29. " [13] ,OUT Endpoint 13 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 28. " [12] ,OUT Endpoint 12 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 27. " [11] ,OUT Endpoint 11 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 26. " [10] ,OUT Endpoint 10 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 25. " [9] ,OUT Endpoint 9 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 24. " [8] ,OUT Endpoint 8 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 23. " [7] ,OUT Endpoint 7 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 22. " [6] ,OUT Endpoint 6 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 21. " [5] ,OUT Endpoint 5 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 20. " [4] ,OUT Endpoint 4 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 19. " [3] ,OUT Endpoint 3 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 18. " [2] ,OUT Endpoint 2 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 17. " [1] ,OUT Endpoint 1 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 16. " [0] ,OUT Endpoint 0 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 15. " INEPMSK[15] ,IN Endpoint 15 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 14. " [14] ,IN Endpoint 14 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 13. " [13] ,IN Endpoint 13 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 12. " [12] ,IN Endpoint 12 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 11. " [11] ,IN Endpoint 11 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 10. " [10] ,IN Endpoint 10 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 9. " [9] ,IN Endpoint 9 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 8. " [8] ,IN Endpoint 8 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 7. " [7] ,IN Endpoint 7 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 6. " [6] ,IN Endpoint 6 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 5. " [5] ,IN Endpoint 5 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 4. " [4] ,IN Endpoint 4 Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x00 3. " [3] ,IN Endpoint 3 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 2. " [2] ,IN Endpoint 2 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 1. " [1] ,IN Endpoint 1 Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x00 0. " [0] ,IN Endpoint 0 Interrupt Mask Bit" "Masked,Not masked" group.long 0x828++0x0F line.long 0x00 "DVBUSDIS,Device VBUS Discharge Time Register" hexmask.long.word 0x00 0.--15. 1. " DVBUSDIS ,Device Vbus Discharge Time" line.long 0x04 "DVBUSPULSE,Device VBUS Pulsing Time Register" hexmask.long.word 0x04 0.--11. 1. " DVBUSPULSE ,Device Vbus Pulsing Time" line.long 0x08 "DTHRCTL,Device Threshold Control Register" bitfld.long 0x08 27. " ARBPRKEN ,Arbiter Parking Enable" "Disabled,Enabled" hexmask.long.word 0x08 17.--25. 1. " RXTHRLEN ,Receive Threshold Length" bitfld.long 0x08 16. " RXTHREN ,Receive Threshold Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 11.--12. " AHBTHRRATIO ,AHB Threshold Ratio" "MAC threshold,MAC threshold/2,MAC threshold/4,MAC threshold/8" hexmask.long.word 0x08 2.--10. 1. " TXTHRLEN ,Transmit Threshold" bitfld.long 0x08 1. " ISOTHREN ,ISO IN Endpoints Threshold Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 0. " NONISOTHREN ,Non-ISO IN Endpoints Threshold Enable" "Disabled,Enabled" line.long 0x0C "DIEPEMPMSK,Device IN Endpoint FIFO Empty Interrupt Mask Register" bitfld.long 0x0C 15. " INEPTXFEMPMSK_[15] ,IN EP 15 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 14. " [14] ,IN EP 14 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 13. " [13] ,IN EP 13 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 12. " [12] ,IN EP 12 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x0C 11. " [11] ,IN EP 11 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 10. " [10] ,IN EP 10 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 9. " [9] ,IN EP 9 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 8. " [8] ,IN EP 8 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x0C 7. " [7] ,IN EP 7 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 6. " [6] ,IN EP 6 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 5. " [5] ,IN EP 5 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 4. " [4] ,IN EP 4 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" textline " " bitfld.long 0x0C 3. " [3] ,IN EP 3 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 2. " [2] ,IN EP 2 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 1. " [1] ,IN EP 1 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" bitfld.long 0x0C 0. " [0] ,IN EP 0 Tx FIFO Empty Interrupt Mask Bit" "Masked,Not masked" width 12. group.long 0x900++0x03 "Device IN Endpoint 0" line.long 0x00 "DIEPCTL0,Device Control IN Endpoint 0 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif rbitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,?..." rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" textline " " rbitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" ",Active" bitfld.long 0x00 0.--1. " MPS ,Maximum Packet Size" "64,32,16,8" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x900+0x08)++0x03 line.long 0x00 "DIEPINT0,Device Endpoint-0 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x900+0x08)++0x03 line.long 0x00 "DIEPINT0,Device Endpoint-0 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x900+0x10)++0x03 line.long 0x00 "DIEPTSIZ0,Device Endpoint 0 Transfer Size Register" bitfld.long 0x00 19.--20. " PKTCNT ,Packet Count" "0,1,2,3" hexmask.long.byte 0x00 0.--6. 1. " XFERSIZE ,Transfer Size" group.long (0x900+0x14)++0x03 line.long 0x00 "DIEPDMA0,Device Endpoint-0 DMA Address Register" rgroup.long (0x900+0x18)++0x03 line.long 0x00 "DTXFSTS0,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0x900+0x1C)++0x03 line.long 0x00 "DIEPDMAB0,Device Endpoint-0 DMA Buffer Address Register" else hgroup.long (0x900+0x1C)++0x03 hide.long 0x00 "DIEPDMAB0,Device Endpoint-0 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x920))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0x920))&0xC0000)==0xC0000)) group.long 0x920++0x03 "Device IN Endpoint 1" line.long 0x00 "DIEPCTL1,Device Control IN Endpoint 1 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x920++0x03 "Device IN Endpoint 1" line.long 0x00 "DIEPCTL1,Device Control IN Endpoint 1 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x920+0x08)++0x03 line.long 0x00 "DIEPINT1,Device Endpoint-1 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x920+0x08)++0x03 line.long 0x00 "DIEPINT1,Device Endpoint-1 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x920+0x10)++0x03 line.long 0x00 "DIEPTSIZ1,Device Endpoint-1 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x920+0x14)++0x03 line.long 0x00 "DIEPDMA1,Device Endpoint-1 DMA Address Register" rgroup.long (0x920+0x18)++0x03 line.long 0x00 "DTXFSTS1,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0x920+0x1C)++0x03 line.long 0x00 "DIEPDMAB1,Device Endpoint-1 DMA Buffer Address Register" else hgroup.long (0x920+0x1C)++0x03 hide.long 0x00 "DIEPDMAB1,Device Endpoint-1 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x940))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0x940))&0xC0000)==0xC0000)) group.long 0x940++0x03 "Device IN Endpoint 2" line.long 0x00 "DIEPCTL2,Device Control IN Endpoint 2 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x940++0x03 "Device IN Endpoint 2" line.long 0x00 "DIEPCTL2,Device Control IN Endpoint 2 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x940+0x08)++0x03 line.long 0x00 "DIEPINT2,Device Endpoint-2 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x940+0x08)++0x03 line.long 0x00 "DIEPINT2,Device Endpoint-2 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x940+0x10)++0x03 line.long 0x00 "DIEPTSIZ2,Device Endpoint-2 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x940+0x14)++0x03 line.long 0x00 "DIEPDMA2,Device Endpoint-2 DMA Address Register" rgroup.long (0x940+0x18)++0x03 line.long 0x00 "DTXFSTS2,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0x940+0x1C)++0x03 line.long 0x00 "DIEPDMAB2,Device Endpoint-2 DMA Buffer Address Register" else hgroup.long (0x940+0x1C)++0x03 hide.long 0x00 "DIEPDMAB2,Device Endpoint-2 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x960))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0x960))&0xC0000)==0xC0000)) group.long 0x960++0x03 "Device IN Endpoint 3" line.long 0x00 "DIEPCTL3,Device Control IN Endpoint 3 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x960++0x03 "Device IN Endpoint 3" line.long 0x00 "DIEPCTL3,Device Control IN Endpoint 3 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x960+0x08)++0x03 line.long 0x00 "DIEPINT3,Device Endpoint-3 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x960+0x08)++0x03 line.long 0x00 "DIEPINT3,Device Endpoint-3 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x960+0x10)++0x03 line.long 0x00 "DIEPTSIZ3,Device Endpoint-3 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x960+0x14)++0x03 line.long 0x00 "DIEPDMA3,Device Endpoint-3 DMA Address Register" rgroup.long (0x960+0x18)++0x03 line.long 0x00 "DTXFSTS3,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0x960+0x1C)++0x03 line.long 0x00 "DIEPDMAB3,Device Endpoint-3 DMA Buffer Address Register" else hgroup.long (0x960+0x1C)++0x03 hide.long 0x00 "DIEPDMAB3,Device Endpoint-3 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x980))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0x980))&0xC0000)==0xC0000)) group.long 0x980++0x03 "Device IN Endpoint 4" line.long 0x00 "DIEPCTL4,Device Control IN Endpoint 4 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x980++0x03 "Device IN Endpoint 4" line.long 0x00 "DIEPCTL4,Device Control IN Endpoint 4 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x980+0x08)++0x03 line.long 0x00 "DIEPINT4,Device Endpoint-4 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x980+0x08)++0x03 line.long 0x00 "DIEPINT4,Device Endpoint-4 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x980+0x10)++0x03 line.long 0x00 "DIEPTSIZ4,Device Endpoint-4 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x980+0x14)++0x03 line.long 0x00 "DIEPDMA4,Device Endpoint-4 DMA Address Register" rgroup.long (0x980+0x18)++0x03 line.long 0x00 "DTXFSTS4,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0x980+0x1C)++0x03 line.long 0x00 "DIEPDMAB4,Device Endpoint-4 DMA Buffer Address Register" else hgroup.long (0x980+0x1C)++0x03 hide.long 0x00 "DIEPDMAB4,Device Endpoint-4 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x9A0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0x9A0))&0xC0000)==0xC0000)) group.long 0x9A0++0x03 "Device IN Endpoint 5" line.long 0x00 "DIEPCTL5,Device Control IN Endpoint 5 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x9A0++0x03 "Device IN Endpoint 5" line.long 0x00 "DIEPCTL5,Device Control IN Endpoint 5 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x9A0+0x08)++0x03 line.long 0x00 "DIEPINT5,Device Endpoint-5 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x9A0+0x08)++0x03 line.long 0x00 "DIEPINT5,Device Endpoint-5 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x9A0+0x10)++0x03 line.long 0x00 "DIEPTSIZ5,Device Endpoint-5 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x9A0+0x14)++0x03 line.long 0x00 "DIEPDMA5,Device Endpoint-5 DMA Address Register" rgroup.long (0x9A0+0x18)++0x03 line.long 0x00 "DTXFSTS5,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0x9A0+0x1C)++0x03 line.long 0x00 "DIEPDMAB5,Device Endpoint-5 DMA Buffer Address Register" else hgroup.long (0x9A0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB5,Device Endpoint-5 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x9C0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0x9C0))&0xC0000)==0xC0000)) group.long 0x9C0++0x03 "Device IN Endpoint 6" line.long 0x00 "DIEPCTL6,Device Control IN Endpoint 6 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x9C0++0x03 "Device IN Endpoint 6" line.long 0x00 "DIEPCTL6,Device Control IN Endpoint 6 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x9C0+0x08)++0x03 line.long 0x00 "DIEPINT6,Device Endpoint-6 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x9C0+0x08)++0x03 line.long 0x00 "DIEPINT6,Device Endpoint-6 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x9C0+0x10)++0x03 line.long 0x00 "DIEPTSIZ6,Device Endpoint-6 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x9C0+0x14)++0x03 line.long 0x00 "DIEPDMA6,Device Endpoint-6 DMA Address Register" rgroup.long (0x9C0+0x18)++0x03 line.long 0x00 "DTXFSTS6,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0x9C0+0x1C)++0x03 line.long 0x00 "DIEPDMAB6,Device Endpoint-6 DMA Buffer Address Register" else hgroup.long (0x9C0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB6,Device Endpoint-6 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0x9E0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0x9E0))&0xC0000)==0xC0000)) group.long 0x9E0++0x03 "Device IN Endpoint 7" line.long 0x00 "DIEPCTL7,Device Control IN Endpoint 7 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0x9E0++0x03 "Device IN Endpoint 7" line.long 0x00 "DIEPCTL7,Device Control IN Endpoint 7 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0x9E0+0x08)++0x03 line.long 0x00 "DIEPINT7,Device Endpoint-7 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0x9E0+0x08)++0x03 line.long 0x00 "DIEPINT7,Device Endpoint-7 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0x9E0+0x10)++0x03 line.long 0x00 "DIEPTSIZ7,Device Endpoint-7 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0x9E0+0x14)++0x03 line.long 0x00 "DIEPDMA7,Device Endpoint-7 DMA Address Register" rgroup.long (0x9E0+0x18)++0x03 line.long 0x00 "DTXFSTS7,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0x9E0+0x1C)++0x03 line.long 0x00 "DIEPDMAB7,Device Endpoint-7 DMA Buffer Address Register" else hgroup.long (0x9E0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB7,Device Endpoint-7 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xA00))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xA00))&0xC0000)==0xC0000)) group.long 0xA00++0x03 "Device IN Endpoint 8" line.long 0x00 "DIEPCTL8,Device Control IN Endpoint 8 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA00++0x03 "Device IN Endpoint 8" line.long 0x00 "DIEPCTL8,Device Control IN Endpoint 8 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xA00+0x08)++0x03 line.long 0x00 "DIEPINT8,Device Endpoint-8 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA00+0x08)++0x03 line.long 0x00 "DIEPINT8,Device Endpoint-8 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA00+0x10)++0x03 line.long 0x00 "DIEPTSIZ8,Device Endpoint-8 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA00+0x14)++0x03 line.long 0x00 "DIEPDMA8,Device Endpoint-8 DMA Address Register" rgroup.long (0xA00+0x18)++0x03 line.long 0x00 "DTXFSTS8,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA00+0x1C)++0x03 line.long 0x00 "DIEPDMAB8,Device Endpoint-8 DMA Buffer Address Register" else hgroup.long (0xA00+0x1C)++0x03 hide.long 0x00 "DIEPDMAB8,Device Endpoint-8 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xA20))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xA20))&0xC0000)==0xC0000)) group.long 0xA20++0x03 "Device IN Endpoint 9" line.long 0x00 "DIEPCTL9,Device Control IN Endpoint 9 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA20++0x03 "Device IN Endpoint 9" line.long 0x00 "DIEPCTL9,Device Control IN Endpoint 9 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xA20+0x08)++0x03 line.long 0x00 "DIEPINT9,Device Endpoint-9 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA20+0x08)++0x03 line.long 0x00 "DIEPINT9,Device Endpoint-9 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA20+0x10)++0x03 line.long 0x00 "DIEPTSIZ9,Device Endpoint-9 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA20+0x14)++0x03 line.long 0x00 "DIEPDMA9,Device Endpoint-9 DMA Address Register" rgroup.long (0xA20+0x18)++0x03 line.long 0x00 "DTXFSTS9,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA20+0x1C)++0x03 line.long 0x00 "DIEPDMAB9,Device Endpoint-9 DMA Buffer Address Register" else hgroup.long (0xA20+0x1C)++0x03 hide.long 0x00 "DIEPDMAB9,Device Endpoint-9 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xA40))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xA40))&0xC0000)==0xC0000)) group.long 0xA40++0x03 "Device IN Endpoint 10" line.long 0x00 "DIEPCTL10,Device Control IN Endpoint 10 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA40++0x03 "Device IN Endpoint 10" line.long 0x00 "DIEPCTL10,Device Control IN Endpoint 10 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xA40+0x08)++0x03 line.long 0x00 "DIEPINT10,Device Endpoint-10 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA40+0x08)++0x03 line.long 0x00 "DIEPINT10,Device Endpoint-10 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA40+0x10)++0x03 line.long 0x00 "DIEPTSIZ10,Device Endpoint-10 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA40+0x14)++0x03 line.long 0x00 "DIEPDMA10,Device Endpoint-10 DMA Address Register" rgroup.long (0xA40+0x18)++0x03 line.long 0x00 "DTXFSTS10,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA40+0x1C)++0x03 line.long 0x00 "DIEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" else hgroup.long (0xA40+0x1C)++0x03 hide.long 0x00 "DIEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xA60))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xA60))&0xC0000)==0xC0000)) group.long 0xA60++0x03 "Device IN Endpoint 11" line.long 0x00 "DIEPCTL11,Device Control IN Endpoint 11 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA60++0x03 "Device IN Endpoint 11" line.long 0x00 "DIEPCTL11,Device Control IN Endpoint 11 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xA60+0x08)++0x03 line.long 0x00 "DIEPINT11,Device Endpoint-11 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA60+0x08)++0x03 line.long 0x00 "DIEPINT11,Device Endpoint-11 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA60+0x10)++0x03 line.long 0x00 "DIEPTSIZ11,Device Endpoint-11 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA60+0x14)++0x03 line.long 0x00 "DIEPDMA11,Device Endpoint-11 DMA Address Register" rgroup.long (0xA60+0x18)++0x03 line.long 0x00 "DTXFSTS11,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA60+0x1C)++0x03 line.long 0x00 "DIEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" else hgroup.long (0xA60+0x1C)++0x03 hide.long 0x00 "DIEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xA80))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xA80))&0xC0000)==0xC0000)) group.long 0xA80++0x03 "Device IN Endpoint 12" line.long 0x00 "DIEPCTL12,Device Control IN Endpoint 12 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xA80++0x03 "Device IN Endpoint 12" line.long 0x00 "DIEPCTL12,Device Control IN Endpoint 12 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xA80+0x08)++0x03 line.long 0x00 "DIEPINT12,Device Endpoint-12 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xA80+0x08)++0x03 line.long 0x00 "DIEPINT12,Device Endpoint-12 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xA80+0x10)++0x03 line.long 0x00 "DIEPTSIZ12,Device Endpoint-12 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xA80+0x14)++0x03 line.long 0x00 "DIEPDMA12,Device Endpoint-12 DMA Address Register" rgroup.long (0xA80+0x18)++0x03 line.long 0x00 "DTXFSTS12,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xA80+0x1C)++0x03 line.long 0x00 "DIEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" else hgroup.long (0xA80+0x1C)++0x03 hide.long 0x00 "DIEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xAA0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xAA0))&0xC0000)==0xC0000)) group.long 0xAA0++0x03 "Device IN Endpoint 13" line.long 0x00 "DIEPCTL13,Device Control IN Endpoint 13 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xAA0++0x03 "Device IN Endpoint 13" line.long 0x00 "DIEPCTL13,Device Control IN Endpoint 13 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xAA0+0x08)++0x03 line.long 0x00 "DIEPINT13,Device Endpoint-13 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xAA0+0x08)++0x03 line.long 0x00 "DIEPINT13,Device Endpoint-13 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xAA0+0x10)++0x03 line.long 0x00 "DIEPTSIZ13,Device Endpoint-13 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xAA0+0x14)++0x03 line.long 0x00 "DIEPDMA13,Device Endpoint-13 DMA Address Register" rgroup.long (0xAA0+0x18)++0x03 line.long 0x00 "DTXFSTS13,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xAA0+0x1C)++0x03 line.long 0x00 "DIEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" else hgroup.long (0xAA0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xAC0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xAC0))&0xC0000)==0xC0000)) group.long 0xAC0++0x03 "Device IN Endpoint 14" line.long 0x00 "DIEPCTL14,Device Control IN Endpoint 14 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xAC0++0x03 "Device IN Endpoint 14" line.long 0x00 "DIEPCTL14,Device Control IN Endpoint 14 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xAC0+0x08)++0x03 line.long 0x00 "DIEPINT14,Device Endpoint-14 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xAC0+0x08)++0x03 line.long 0x00 "DIEPINT14,Device Endpoint-14 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xAC0+0x10)++0x03 line.long 0x00 "DIEPTSIZ14,Device Endpoint-14 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xAC0+0x14)++0x03 line.long 0x00 "DIEPDMA14,Device Endpoint-14 DMA Address Register" rgroup.long (0xAC0+0x18)++0x03 line.long 0x00 "DTXFSTS14,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xAC0+0x1C)++0x03 line.long 0x00 "DIEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" else hgroup.long (0xAC0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xAE0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xAE0))&0xC0000)==0xC0000)) group.long 0xAE0++0x03 "Device IN Endpoint 15" line.long 0x00 "DIEPCTL15,Device Control IN Endpoint 15 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Disabled,Enabled" textline " " endif bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xAE0++0x03 "Device IN Endpoint 15" line.long 0x00 "DIEPCTL15,Device Control IN Endpoint 15 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" bitfld.long 0x00 22.--25. " TXFNUM ,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" textline " " bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xAE0+0x08)++0x03 line.long 0x00 "DIEPINT15,Device Endpoint-15 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xAE0+0x08)++0x03 line.long 0x00 "DIEPINT15,Device Endpoint-15 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK Interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERR ,BbleErr Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Drop Status" "No interrupt,Interrupt" bitfld.long 0x00 8. " TXFIFOUNDRN ,Fifo Underrun" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " TXFEMP ,Transmit FIFO Empty" "No interrupt,Interrupt" bitfld.long 0x00 6. " INEPNAKEFF ,IN Endpoint NAK Effective Mask" "No interrupt,Interrupt" bitfld.long 0x00 5. " INTKNEPMIS ,IN Token Received with EP Mismatch" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " INTKNTXFEMP ,IN Token Received When TxFIFO is Empty" "No interrupt,Interrupt" bitfld.long 0x00 3. " TIMEOUT ,Timeout Condition" "Not detected,Detected" bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" textline " " bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xAE0+0x10)++0x03 line.long 0x00 "DIEPTSIZ15,Device Endpoint-15 Transfer Size Register" bitfld.long 0x00 29.--30. " MC ,Packets per microframe" ",1,2,3" textline " " hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xAE0+0x14)++0x03 line.long 0x00 "DIEPDMA15,Device Endpoint-15 DMA Address Register" rgroup.long (0xAE0+0x18)++0x03 line.long 0x00 "DTXFSTS15,Device IN Endpoint Transmit FIFO Status Register" hexmask.long.word 0x00 0.--15. 1. " INEPTXFSPCAVAIL ,IN Endpoint TxFIFO Space Avail" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xAE0+0x1C)++0x03 line.long 0x00 "DIEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" else hgroup.long (0xAE0+0x1C)++0x03 hide.long 0x00 "DIEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" endif group.long 0xB00++0x03 "Device OUT Endpoint 0 " line.long 0x00 "DOEPCTL0,Device Control OUT Endpoint 0 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enabled" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enabled" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" rbitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,?..." textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" rbitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" ",Active" textline " " rbitfld.long 0x00 0.--1. " MPS ,Maximum Packet Size" "64 bytes,32 bytes,16 bytes,8 bytes" if (((d.l(ad:0xFFB40000+0xB00-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB00+0x08)++0x03 line.long 0x00 "DOEPINT0 ,Device Endpoint-0 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xB00-0x08))&0xC0000)==0x00000) group.long (0xB00+0x08)++0x03 line.long 0x00 "DOEPINT0 ,Device Endpoint-0 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB00+0x08)++0x03 line.long 0x00 "DOEPINT0 ,Device Endpoint-0 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB00+0x08)++0x03 line.long 0x00 "DOEPINT0 ,Device Endpoint-0 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB00+0x10)++0x03 line.long 0x00 "DOEPTSIZ0,Device Endpoint 0 Transfer Size Register" bitfld.long 0x00 29.--30. " SUPCNT ,SETUP Packet Count" ",1,2,3" bitfld.long 0x00 19. " PKTCNT ,Packet Count" "0,1" hexmask.long.byte 0x00 0.--6. 1. " XFERSIZE ,Transfer Size" group.long (0xB00+0x14)++0x03 line.long 0x00 "DOEPDMA0 ,Device Endpoint-0 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB00+0x1C)++0x03 line.long 0x00 "DOEPDMAB0 ,Device Endpoint-0 DMA Buffer Address Register" else hgroup.long (0xB00+0x1C)++0x03 hide.long 0x00 "DOEPDMAB0 ,Device Endpoint-0 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xB20))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xB20))&0xC0000)==0xC0000)) group.long 0xB20++0x03 "Device OUT Endpoint 1 " line.long 0x00 "DOEPCTL1 ,Device Control OUT Endpoint 1 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xB20++0x03 "Device OUT Endpoint 1 " line.long 0x00 "DOEPCTL1 ,Device Endpoint-1 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xB20-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB20+0x08)++0x03 line.long 0x00 "DOEPINT1 ,Device Endpoint-1 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xB20-0x08))&0xC0000)==0x00000) group.long (0xB20+0x08)++0x03 line.long 0x00 "DOEPINT1 ,Device Endpoint-1 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB20+0x08)++0x03 line.long 0x00 "DOEPINT1 ,Device Endpoint-1 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB20+0x08)++0x03 line.long 0x00 "DOEPINT1 ,Device Endpoint-1 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB20+0x10)++0x03 line.long 0x00 "DOEPTSIZ1 ,Device Endpoint-1 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xB20+0x14)++0x03 line.long 0x00 "DOEPDMA1 ,Device Endpoint-1 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB20+0x1C)++0x03 line.long 0x00 "DOEPDMAB1 ,Device Endpoint-1 DMA Buffer Address Register" else hgroup.long (0xB20+0x1C)++0x03 hide.long 0x00 "DOEPDMAB1 ,Device Endpoint-1 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xB40))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xB40))&0xC0000)==0xC0000)) group.long 0xB40++0x03 "Device OUT Endpoint 2 " line.long 0x00 "DOEPCTL2 ,Device Control OUT Endpoint 2 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xB40++0x03 "Device OUT Endpoint 2 " line.long 0x00 "DOEPCTL2 ,Device Endpoint-2 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xB40-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB40+0x08)++0x03 line.long 0x00 "DOEPINT2 ,Device Endpoint-2 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xB40-0x08))&0xC0000)==0x00000) group.long (0xB40+0x08)++0x03 line.long 0x00 "DOEPINT2 ,Device Endpoint-2 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB40+0x08)++0x03 line.long 0x00 "DOEPINT2 ,Device Endpoint-2 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB40+0x08)++0x03 line.long 0x00 "DOEPINT2 ,Device Endpoint-2 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB40+0x10)++0x03 line.long 0x00 "DOEPTSIZ2 ,Device Endpoint-2 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xB40+0x14)++0x03 line.long 0x00 "DOEPDMA2 ,Device Endpoint-2 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB40+0x1C)++0x03 line.long 0x00 "DOEPDMAB2 ,Device Endpoint-2 DMA Buffer Address Register" else hgroup.long (0xB40+0x1C)++0x03 hide.long 0x00 "DOEPDMAB2 ,Device Endpoint-2 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xB60))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xB60))&0xC0000)==0xC0000)) group.long 0xB60++0x03 "Device OUT Endpoint 3 " line.long 0x00 "DOEPCTL3 ,Device Control OUT Endpoint 3 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xB60++0x03 "Device OUT Endpoint 3 " line.long 0x00 "DOEPCTL3 ,Device Endpoint-3 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xB60-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB60+0x08)++0x03 line.long 0x00 "DOEPINT3 ,Device Endpoint-3 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xB60-0x08))&0xC0000)==0x00000) group.long (0xB60+0x08)++0x03 line.long 0x00 "DOEPINT3 ,Device Endpoint-3 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB60+0x08)++0x03 line.long 0x00 "DOEPINT3 ,Device Endpoint-3 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB60+0x08)++0x03 line.long 0x00 "DOEPINT3 ,Device Endpoint-3 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB60+0x10)++0x03 line.long 0x00 "DOEPTSIZ3 ,Device Endpoint-3 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xB60+0x14)++0x03 line.long 0x00 "DOEPDMA3 ,Device Endpoint-3 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB60+0x1C)++0x03 line.long 0x00 "DOEPDMAB3 ,Device Endpoint-3 DMA Buffer Address Register" else hgroup.long (0xB60+0x1C)++0x03 hide.long 0x00 "DOEPDMAB3 ,Device Endpoint-3 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xB80))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xB80))&0xC0000)==0xC0000)) group.long 0xB80++0x03 "Device OUT Endpoint 4 " line.long 0x00 "DOEPCTL4 ,Device Control OUT Endpoint 4 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xB80++0x03 "Device OUT Endpoint 4 " line.long 0x00 "DOEPCTL4 ,Device Endpoint-4 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xB80-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB80+0x08)++0x03 line.long 0x00 "DOEPINT4 ,Device Endpoint-4 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xB80-0x08))&0xC0000)==0x00000) group.long (0xB80+0x08)++0x03 line.long 0x00 "DOEPINT4 ,Device Endpoint-4 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xB80+0x08)++0x03 line.long 0x00 "DOEPINT4 ,Device Endpoint-4 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xB80+0x08)++0x03 line.long 0x00 "DOEPINT4 ,Device Endpoint-4 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xB80+0x10)++0x03 line.long 0x00 "DOEPTSIZ4 ,Device Endpoint-4 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xB80+0x14)++0x03 line.long 0x00 "DOEPDMA4 ,Device Endpoint-4 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xB80+0x1C)++0x03 line.long 0x00 "DOEPDMAB4 ,Device Endpoint-4 DMA Buffer Address Register" else hgroup.long (0xB80+0x1C)++0x03 hide.long 0x00 "DOEPDMAB4 ,Device Endpoint-4 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xBA0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xBA0))&0xC0000)==0xC0000)) group.long 0xBA0++0x03 "Device OUT Endpoint 5 " line.long 0x00 "DOEPCTL5 ,Device Control OUT Endpoint 5 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xBA0++0x03 "Device OUT Endpoint 5 " line.long 0x00 "DOEPCTL5 ,Device Endpoint-5 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xBA0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xBA0+0x08)++0x03 line.long 0x00 "DOEPINT5 ,Device Endpoint-5 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xBA0-0x08))&0xC0000)==0x00000) group.long (0xBA0+0x08)++0x03 line.long 0x00 "DOEPINT5 ,Device Endpoint-5 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xBA0+0x08)++0x03 line.long 0x00 "DOEPINT5 ,Device Endpoint-5 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xBA0+0x08)++0x03 line.long 0x00 "DOEPINT5 ,Device Endpoint-5 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xBA0+0x10)++0x03 line.long 0x00 "DOEPTSIZ5 ,Device Endpoint-5 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xBA0+0x14)++0x03 line.long 0x00 "DOEPDMA5 ,Device Endpoint-5 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xBA0+0x1C)++0x03 line.long 0x00 "DOEPDMAB5 ,Device Endpoint-5 DMA Buffer Address Register" else hgroup.long (0xBA0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB5 ,Device Endpoint-5 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xBC0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xBC0))&0xC0000)==0xC0000)) group.long 0xBC0++0x03 "Device OUT Endpoint 6 " line.long 0x00 "DOEPCTL6 ,Device Control OUT Endpoint 6 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xBC0++0x03 "Device OUT Endpoint 6 " line.long 0x00 "DOEPCTL6 ,Device Endpoint-6 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xBC0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xBC0+0x08)++0x03 line.long 0x00 "DOEPINT6 ,Device Endpoint-6 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xBC0-0x08))&0xC0000)==0x00000) group.long (0xBC0+0x08)++0x03 line.long 0x00 "DOEPINT6 ,Device Endpoint-6 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xBC0+0x08)++0x03 line.long 0x00 "DOEPINT6 ,Device Endpoint-6 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xBC0+0x08)++0x03 line.long 0x00 "DOEPINT6 ,Device Endpoint-6 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xBC0+0x10)++0x03 line.long 0x00 "DOEPTSIZ6 ,Device Endpoint-6 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xBC0+0x14)++0x03 line.long 0x00 "DOEPDMA6 ,Device Endpoint-6 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xBC0+0x1C)++0x03 line.long 0x00 "DOEPDMAB6 ,Device Endpoint-6 DMA Buffer Address Register" else hgroup.long (0xBC0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB6 ,Device Endpoint-6 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xBE0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xBE0))&0xC0000)==0xC0000)) group.long 0xBE0++0x03 "Device OUT Endpoint 7 " line.long 0x00 "DOEPCTL7 ,Device Control OUT Endpoint 7 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xBE0++0x03 "Device OUT Endpoint 7 " line.long 0x00 "DOEPCTL7 ,Device Endpoint-7 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xBE0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xBE0+0x08)++0x03 line.long 0x00 "DOEPINT7 ,Device Endpoint-7 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xBE0-0x08))&0xC0000)==0x00000) group.long (0xBE0+0x08)++0x03 line.long 0x00 "DOEPINT7 ,Device Endpoint-7 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xBE0+0x08)++0x03 line.long 0x00 "DOEPINT7 ,Device Endpoint-7 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xBE0+0x08)++0x03 line.long 0x00 "DOEPINT7 ,Device Endpoint-7 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xBE0+0x10)++0x03 line.long 0x00 "DOEPTSIZ7 ,Device Endpoint-7 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xBE0+0x14)++0x03 line.long 0x00 "DOEPDMA7 ,Device Endpoint-7 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xBE0+0x1C)++0x03 line.long 0x00 "DOEPDMAB7 ,Device Endpoint-7 DMA Buffer Address Register" else hgroup.long (0xBE0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB7 ,Device Endpoint-7 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xC00))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xC00))&0xC0000)==0xC0000)) group.long 0xC00++0x03 "Device OUT Endpoint 8 " line.long 0x00 "DOEPCTL8 ,Device Control OUT Endpoint 8 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC00++0x03 "Device OUT Endpoint 8 " line.long 0x00 "DOEPCTL8 ,Device Endpoint-8 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xC00-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC00+0x08)++0x03 line.long 0x00 "DOEPINT8 ,Device Endpoint-8 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xC00-0x08))&0xC0000)==0x00000) group.long (0xC00+0x08)++0x03 line.long 0x00 "DOEPINT8 ,Device Endpoint-8 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC00+0x08)++0x03 line.long 0x00 "DOEPINT8 ,Device Endpoint-8 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC00+0x08)++0x03 line.long 0x00 "DOEPINT8 ,Device Endpoint-8 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC00+0x10)++0x03 line.long 0x00 "DOEPTSIZ8 ,Device Endpoint-8 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC00+0x14)++0x03 line.long 0x00 "DOEPDMA8 ,Device Endpoint-8 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC00+0x1C)++0x03 line.long 0x00 "DOEPDMAB8 ,Device Endpoint-8 DMA Buffer Address Register" else hgroup.long (0xC00+0x1C)++0x03 hide.long 0x00 "DOEPDMAB8 ,Device Endpoint-8 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xC20))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xC20))&0xC0000)==0xC0000)) group.long 0xC20++0x03 "Device OUT Endpoint 9 " line.long 0x00 "DOEPCTL9 ,Device Control OUT Endpoint 9 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC20++0x03 "Device OUT Endpoint 9 " line.long 0x00 "DOEPCTL9 ,Device Endpoint-9 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xC20-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC20+0x08)++0x03 line.long 0x00 "DOEPINT9 ,Device Endpoint-9 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xC20-0x08))&0xC0000)==0x00000) group.long (0xC20+0x08)++0x03 line.long 0x00 "DOEPINT9 ,Device Endpoint-9 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC20+0x08)++0x03 line.long 0x00 "DOEPINT9 ,Device Endpoint-9 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC20+0x08)++0x03 line.long 0x00 "DOEPINT9 ,Device Endpoint-9 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC20+0x10)++0x03 line.long 0x00 "DOEPTSIZ9 ,Device Endpoint-9 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC20+0x14)++0x03 line.long 0x00 "DOEPDMA9 ,Device Endpoint-9 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC20+0x1C)++0x03 line.long 0x00 "DOEPDMAB9 ,Device Endpoint-9 DMA Buffer Address Register" else hgroup.long (0xC20+0x1C)++0x03 hide.long 0x00 "DOEPDMAB9 ,Device Endpoint-9 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xC40))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xC40))&0xC0000)==0xC0000)) group.long 0xC40++0x03 "Device OUT Endpoint 10" line.long 0x00 "DOEPCTL10,Device Control OUT Endpoint 10 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC40++0x03 "Device OUT Endpoint 10" line.long 0x00 "DOEPCTL10,Device Endpoint-10 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xC40-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC40+0x08)++0x03 line.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xC40-0x08))&0xC0000)==0x00000) group.long (0xC40+0x08)++0x03 line.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC40+0x08)++0x03 line.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC40+0x08)++0x03 line.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC40+0x10)++0x03 line.long 0x00 "DOEPTSIZ10,Device Endpoint-10 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC40+0x14)++0x03 line.long 0x00 "DOEPDMA10,Device Endpoint-10 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC40+0x1C)++0x03 line.long 0x00 "DOEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" else hgroup.long (0xC40+0x1C)++0x03 hide.long 0x00 "DOEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xC60))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xC60))&0xC0000)==0xC0000)) group.long 0xC60++0x03 "Device OUT Endpoint 11" line.long 0x00 "DOEPCTL11,Device Control OUT Endpoint 11 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC60++0x03 "Device OUT Endpoint 11" line.long 0x00 "DOEPCTL11,Device Endpoint-11 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xC60-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC60+0x08)++0x03 line.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xC60-0x08))&0xC0000)==0x00000) group.long (0xC60+0x08)++0x03 line.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC60+0x08)++0x03 line.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC60+0x08)++0x03 line.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC60+0x10)++0x03 line.long 0x00 "DOEPTSIZ11,Device Endpoint-11 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC60+0x14)++0x03 line.long 0x00 "DOEPDMA11,Device Endpoint-11 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC60+0x1C)++0x03 line.long 0x00 "DOEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" else hgroup.long (0xC60+0x1C)++0x03 hide.long 0x00 "DOEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xC80))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xC80))&0xC0000)==0xC0000)) group.long 0xC80++0x03 "Device OUT Endpoint 12" line.long 0x00 "DOEPCTL12,Device Control OUT Endpoint 12 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xC80++0x03 "Device OUT Endpoint 12" line.long 0x00 "DOEPCTL12,Device Endpoint-12 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xC80-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC80+0x08)++0x03 line.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xC80-0x08))&0xC0000)==0x00000) group.long (0xC80+0x08)++0x03 line.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xC80+0x08)++0x03 line.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xC80+0x08)++0x03 line.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xC80+0x10)++0x03 line.long 0x00 "DOEPTSIZ12,Device Endpoint-12 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xC80+0x14)++0x03 line.long 0x00 "DOEPDMA12,Device Endpoint-12 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xC80+0x1C)++0x03 line.long 0x00 "DOEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" else hgroup.long (0xC80+0x1C)++0x03 hide.long 0x00 "DOEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xCA0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xCA0))&0xC0000)==0xC0000)) group.long 0xCA0++0x03 "Device OUT Endpoint 13" line.long 0x00 "DOEPCTL13,Device Control OUT Endpoint 13 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xCA0++0x03 "Device OUT Endpoint 13" line.long 0x00 "DOEPCTL13,Device Endpoint-13 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xCA0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xCA0+0x08)++0x03 line.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xCA0-0x08))&0xC0000)==0x00000) group.long (0xCA0+0x08)++0x03 line.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xCA0+0x08)++0x03 line.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xCA0+0x08)++0x03 line.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xCA0+0x10)++0x03 line.long 0x00 "DOEPTSIZ13,Device Endpoint-13 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xCA0+0x14)++0x03 line.long 0x00 "DOEPDMA13,Device Endpoint-13 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xCA0+0x1C)++0x03 line.long 0x00 "DOEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" else hgroup.long (0xCA0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xCC0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xCC0))&0xC0000)==0xC0000)) group.long 0xCC0++0x03 "Device OUT Endpoint 14" line.long 0x00 "DOEPCTL14,Device Control OUT Endpoint 14 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xCC0++0x03 "Device OUT Endpoint 14" line.long 0x00 "DOEPCTL14,Device Endpoint-14 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xCC0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xCC0+0x08)++0x03 line.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xCC0-0x08))&0xC0000)==0x00000) group.long (0xCC0+0x08)++0x03 line.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xCC0+0x08)++0x03 line.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xCC0+0x08)++0x03 line.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xCC0+0x10)++0x03 line.long 0x00 "DOEPTSIZ14,Device Endpoint-14 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xCC0+0x14)++0x03 line.long 0x00 "DOEPDMA14,Device Endpoint-14 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xCC0+0x1C)++0x03 line.long 0x00 "DOEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" else hgroup.long (0xCC0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" endif if ((((d.l(ad:0xFFB40000+0xCE0))&0xC0000)==0x80000)||(((d.l(ad:0xFFB40000+0xCE0))&0xC0000)==0xC0000)) group.long 0xCE0++0x03 "Device OUT Endpoint 15" line.long 0x00 "DOEPCTL15,Device Control OUT Endpoint 15 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" bitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETD1PID ,Set DATA1 PID" "No effect,Set" bitfld.long 0x00 28. " SETD0PID ,Set DATA0 PID" "No effect,Set" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " DPID ,Endpoint Data PID" "DATA0,DATA1" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" else group.long 0xCE0++0x03 "Device OUT Endpoint 15" line.long 0x00 "DOEPCTL15,Device Endpoint-15 Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " else rbitfld.long 0x00 31. " EPENA ,Endpoint Enable" "No effect,Enable" rbitfld.long 0x00 30. " EPDIS ,Endpoint Disable" "No,Yes" textline " " endif bitfld.long 0x00 29. " SETODDFR ,Set Odd frame" "Even,Odd" bitfld.long 0x00 28. " SETEVENFR ,Set Even frame" "Odd,Even" textline " " bitfld.long 0x00 27. " SNAK ,Set NAK" "No effect,Set" bitfld.long 0x00 26. " CNAK ,Clear NAK" "No effect,Clear" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " else rbitfld.long 0x00 21. " STALL ,STALL Handshake" "Low,High" textline " " endif bitfld.long 0x00 20. " SNP ,Snoop Mode" "Disabled,Enabled" bitfld.long 0x00 18.--19. " EPTYPE ,Endpoint Type" "Control,Isochronous,Bulk,Interrupt" textline " " rbitfld.long 0x00 17. " NAKSTS ,NAK Status" "Non-NAK FIFO,NAK EP" bitfld.long 0x00 16. " EO_FRNUM ,Even/Odd Frame" "Even,Odd" bitfld.long 0x00 15. " USBACTEP ,USB Active Endpoint" "Not active,Active" textline " " hexmask.long.word 0x00 0.--10. 1. " MPS ,Maximum Packet Size" endif if (((d.l(ad:0xFFB40000+0xCE0-0x08))&0xC0000)==0x00000)&&((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xCE0+0x08)++0x03 line.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" bitfld.long 0x00 5. " STSPHSERCVD ,Status Phase Received For Control Write" "Low,High" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif (((d.l(ad:0xFFB40000+0xCE0-0x08))&0xC0000)==0x00000) group.long (0xCE0+0x08)++0x03 line.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 15. " STUPPKTRCVD ,Setup Packet Received" "Not received,Received" textline " " endif bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 6. " BACK2BACKSETUP ,Back-to-Back SETUP Packets Received" "Not received,Received" textline " " bitfld.long 0x00 4. " OUTTKNEPDIS ,OUT Token Received When Endpoint Disabled" "No,Yes" bitfld.long 0x00 3. " SETUP ,SETUP Phase Done" "No,Yes" textline " " bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" elif ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) group.long (0xCE0+0x08)++0x03 line.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" bitfld.long 0x00 9. " BNAINTR ,BNA (Buffer Not Available) Interrupt" "No interrupt,Interrupt" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" else group.long (0xCE0+0x08)++0x03 line.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" bitfld.long 0x00 14. " NYETINTRPT ,NYET interrupt" "No interrupt,Interrupt" bitfld.long 0x00 13. " NAKINTRPT ,NAK interrupt" "No interrupt,Interrupt" bitfld.long 0x00 12. " BBLEERRINTRPT ,BbleErr (Babble Error) interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x00 11. " PKTDRPSTS ,Packet Dropped Status" "Low,High" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " OUTPKTERR ,Non-Isochronous OUT packet CRC error" "No error,Error" textline " " endif bitfld.long 0x00 2. " AHBERR ,AHB Error" "Not occurred,Occurred" bitfld.long 0x00 1. " EPDISBLD ,Endpoint Disabled Interrupt" "No,Yes" bitfld.long 0x00 0. " XFERCOMPL ,Transfer Completed Interrupt" "No interrupt,Interrupt" endif group.long (0xCE0+0x10)++0x03 line.long 0x00 "DOEPTSIZ15,Device Endpoint-15 Transfer Size Register" bitfld.long 0x00 29.--30. " RDPID ,Received Data PID" "DATA0,DATA2,DATA1,MDATA" hexmask.long.word 0x00 19.--28. 1. " PKTCNT ,Packet Count" hexmask.long.tbyte 0x00 0.--18. 1. " XFERSIZE ,Transfer Size" group.long (0xCE0+0x14)++0x03 line.long 0x00 "DOEPDMA15,Device Endpoint-15 DMA Address Register" if ((((d.l(ad:0xFFB40000+0x08))&0x20)==0x20)&&(((d.l(ad:0xFFB40000+0x0400))&0x800000)==0x800000)) rgroup.long (0xCE0+0x1C)++0x03 line.long 0x00 "DOEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" else hgroup.long (0xCE0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" endif else hgroup.long 0x0800++0x07 hide.long 0x00 "DCFG,Device Configuration Register" hide.long 0x04 "DCTL,Device Control Register" hgroup.long 0x0808++0x03 hide.long 0x00 "DSTS,Device Status Register" hgroup.long 0x0810++0x07 hide.long 0x00 "DIEPMSK,Device IN Endpoint Common Interrupt Mask Register" hide.long 0x04 "DOEPMSK,Device OUT Endpoint Common Interrupt Mask Register" hgroup.long 0x0818++0x03 hide.long 0x00 "DAINT,Device All Endpoints Interrupt Register" hgroup.long 0x081C++0x03 hide.long 0x00 "DAINT,Device All Endpoints Interrupt Register" hgroup.long 0x0828++0x07 hide.long 0x00 "DVBUSDIS,Device VBUS Discharge Time Register" hide.long 0x04 "DVBUSPULSE,Device VBUS Pulsing Time Register" hgroup.long 0x0834++0x03 hide.long 0x00 "DIEPEMPMSK,Device IN Endpoint FIFO Empty Interrupt Mask Register" hgroup.long 0x900++0x03 "Device IN Endpoint 0" hide.long 0x00 "DIEPCTL0,Device Control IN Endpoint 0 Control Register" hgroup.long (0x900+0x08)++0x03 hide.long 0x00 "DIEPINT0,Device Endpoint-0 Interrupt Register" hgroup.long 0x0910++0x03 hide.long 0x00 "DIEPTSIZ0,Device Endpoint 0 Transfer Size Register" hgroup.long (0x900+0x14)++0x03 hide.long 0x00 "DIEPDMA0,Device Endpoint-0 DMA Address Register" hgroup.long (0x900+0x18)++0x07 hide.long 0x00 "DTXFSTS0,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB0,Device Endpoint-0 DMA Buffer Address Register" hgroup.long 0x920++0x03 "Device IN Endpoint 1" hide.long 0x00 "DIEPCTL1,Device Endpoint 1 Control Regist" hgroup.long (0x920+0x08)++0x03 hide.long 0x00 "DIEPINT1,Device Endpoint-1 Interrupt Register" hgroup.long (0x920+0x10)++0x03 hide.long 0x00 "DIEPTSIZ1,Device Endpoint-1 Transfer Size Register" hgroup.long (0x920+0x14)++0x03 hide.long 0x00 "DIEPDMA1,Device Endpoint-1 DMA Address Register" hgroup.long (0x920+0x18)++0x07 hide.long 0x00 "DTXFSTS1,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB1,Device Endpoint-1 DMA Buffer Address Register" hgroup.long 0x940++0x03 "Device IN Endpoint 2" hide.long 0x00 "DIEPCTL2,Device Endpoint 2 Control Regist" hgroup.long (0x940+0x08)++0x03 hide.long 0x00 "DIEPINT2,Device Endpoint-2 Interrupt Register" hgroup.long (0x940+0x10)++0x03 hide.long 0x00 "DIEPTSIZ2,Device Endpoint-2 Transfer Size Register" hgroup.long (0x940+0x14)++0x03 hide.long 0x00 "DIEPDMA2,Device Endpoint-2 DMA Address Register" hgroup.long (0x940+0x18)++0x07 hide.long 0x00 "DTXFSTS2,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB2,Device Endpoint-2 DMA Buffer Address Register" hgroup.long 0x960++0x03 "Device IN Endpoint 3" hide.long 0x00 "DIEPCTL3,Device Endpoint 3 Control Regist" hgroup.long (0x960+0x08)++0x03 hide.long 0x00 "DIEPINT3,Device Endpoint-3 Interrupt Register" hgroup.long (0x960+0x10)++0x03 hide.long 0x00 "DIEPTSIZ3,Device Endpoint-3 Transfer Size Register" hgroup.long (0x960+0x14)++0x03 hide.long 0x00 "DIEPDMA3,Device Endpoint-3 DMA Address Register" hgroup.long (0x960+0x18)++0x07 hide.long 0x00 "DTXFSTS3,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB3,Device Endpoint-3 DMA Buffer Address Register" hgroup.long 0x980++0x03 "Device IN Endpoint 4" hide.long 0x00 "DIEPCTL4,Device Endpoint 4 Control Regist" hgroup.long (0x980+0x08)++0x03 hide.long 0x00 "DIEPINT4,Device Endpoint-4 Interrupt Register" hgroup.long (0x980+0x10)++0x03 hide.long 0x00 "DIEPTSIZ4,Device Endpoint-4 Transfer Size Register" hgroup.long (0x980+0x14)++0x03 hide.long 0x00 "DIEPDMA4,Device Endpoint-4 DMA Address Register" hgroup.long (0x980+0x18)++0x07 hide.long 0x00 "DTXFSTS4,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB4,Device Endpoint-4 DMA Buffer Address Register" hgroup.long 0x9A0++0x03 "Device IN Endpoint 5" hide.long 0x00 "DIEPCTL5,Device Endpoint 5 Control Regist" hgroup.long (0x9A0+0x08)++0x03 hide.long 0x00 "DIEPINT5,Device Endpoint-5 Interrupt Register" hgroup.long (0x9A0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ5,Device Endpoint-5 Transfer Size Register" hgroup.long (0x9A0+0x14)++0x03 hide.long 0x00 "DIEPDMA5,Device Endpoint-5 DMA Address Register" hgroup.long (0x9A0+0x18)++0x07 hide.long 0x00 "DTXFSTS5,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB5,Device Endpoint-5 DMA Buffer Address Register" hgroup.long 0x9C0++0x03 "Device IN Endpoint 6" hide.long 0x00 "DIEPCTL6,Device Endpoint 6 Control Regist" hgroup.long (0x9C0+0x08)++0x03 hide.long 0x00 "DIEPINT6,Device Endpoint-6 Interrupt Register" hgroup.long (0x9C0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ6,Device Endpoint-6 Transfer Size Register" hgroup.long (0x9C0+0x14)++0x03 hide.long 0x00 "DIEPDMA6,Device Endpoint-6 DMA Address Register" hgroup.long (0x9C0+0x18)++0x07 hide.long 0x00 "DTXFSTS6,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB6,Device Endpoint-6 DMA Buffer Address Register" hgroup.long 0x9E0++0x03 "Device IN Endpoint 7" hide.long 0x00 "DIEPCTL7,Device Endpoint 7 Control Regist" hgroup.long (0x9E0+0x08)++0x03 hide.long 0x00 "DIEPINT7,Device Endpoint-7 Interrupt Register" hgroup.long (0x9E0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ7,Device Endpoint-7 Transfer Size Register" hgroup.long (0x9E0+0x14)++0x03 hide.long 0x00 "DIEPDMA7,Device Endpoint-7 DMA Address Register" hgroup.long (0x9E0+0x18)++0x07 hide.long 0x00 "DTXFSTS7,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB7,Device Endpoint-7 DMA Buffer Address Register" hgroup.long 0xA00++0x03 "Device IN Endpoint 8" hide.long 0x00 "DIEPCTL8,Device Endpoint 8 Control Regist" hgroup.long (0xA00+0x08)++0x03 hide.long 0x00 "DIEPINT8,Device Endpoint-8 Interrupt Register" hgroup.long (0xA00+0x10)++0x03 hide.long 0x00 "DIEPTSIZ8,Device Endpoint-8 Transfer Size Register" hgroup.long (0xA00+0x14)++0x03 hide.long 0x00 "DIEPDMA8,Device Endpoint-8 DMA Address Register" hgroup.long (0xA00+0x18)++0x07 hide.long 0x00 "DTXFSTS8,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB8,Device Endpoint-8 DMA Buffer Address Register" hgroup.long 0xA20++0x03 "Device IN Endpoint 9" hide.long 0x00 "DIEPCTL9,Device Endpoint 9 Control Regist" hgroup.long (0xA20+0x08)++0x03 hide.long 0x00 "DIEPINT9,Device Endpoint-9 Interrupt Register" hgroup.long (0xA20+0x10)++0x03 hide.long 0x00 "DIEPTSIZ9,Device Endpoint-9 Transfer Size Register" hgroup.long (0xA20+0x14)++0x03 hide.long 0x00 "DIEPDMA9,Device Endpoint-9 DMA Address Register" hgroup.long (0xA20+0x18)++0x07 hide.long 0x00 "DTXFSTS9,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB9,Device Endpoint-9 DMA Buffer Address Register" hgroup.long 0xA40++0x03 "Device IN Endpoint 10" hide.long 0x00 "DIEPCTL10,Device Endpoint 10 Control Regist" hgroup.long (0xA40+0x08)++0x03 hide.long 0x00 "DIEPINT10,Device Endpoint-10 Interrupt Register" hgroup.long (0xA40+0x10)++0x03 hide.long 0x00 "DIEPTSIZ10,Device Endpoint-10 Transfer Size Register" hgroup.long (0xA40+0x14)++0x03 hide.long 0x00 "DIEPDMA10,Device Endpoint-10 DMA Address Register" hgroup.long (0xA40+0x18)++0x07 hide.long 0x00 "DTXFSTS10,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" hgroup.long 0xA60++0x03 "Device IN Endpoint 11" hide.long 0x00 "DIEPCTL11,Device Endpoint 11 Control Regist" hgroup.long (0xA60+0x08)++0x03 hide.long 0x00 "DIEPINT11,Device Endpoint-11 Interrupt Register" hgroup.long (0xA60+0x10)++0x03 hide.long 0x00 "DIEPTSIZ11,Device Endpoint-11 Transfer Size Register" hgroup.long (0xA60+0x14)++0x03 hide.long 0x00 "DIEPDMA11,Device Endpoint-11 DMA Address Register" hgroup.long (0xA60+0x18)++0x07 hide.long 0x00 "DTXFSTS11,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" hgroup.long 0xA80++0x03 "Device IN Endpoint 12" hide.long 0x00 "DIEPCTL12,Device Endpoint 12 Control Regist" hgroup.long (0xA80+0x08)++0x03 hide.long 0x00 "DIEPINT12,Device Endpoint-12 Interrupt Register" hgroup.long (0xA80+0x10)++0x03 hide.long 0x00 "DIEPTSIZ12,Device Endpoint-12 Transfer Size Register" hgroup.long (0xA80+0x14)++0x03 hide.long 0x00 "DIEPDMA12,Device Endpoint-12 DMA Address Register" hgroup.long (0xA80+0x18)++0x07 hide.long 0x00 "DTXFSTS12,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" hgroup.long 0xAA0++0x03 "Device IN Endpoint 13" hide.long 0x00 "DIEPCTL13,Device Endpoint 13 Control Regist" hgroup.long (0xAA0+0x08)++0x03 hide.long 0x00 "DIEPINT13,Device Endpoint-13 Interrupt Register" hgroup.long (0xAA0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ13,Device Endpoint-13 Transfer Size Register" hgroup.long (0xAA0+0x14)++0x03 hide.long 0x00 "DIEPDMA13,Device Endpoint-13 DMA Address Register" hgroup.long (0xAA0+0x18)++0x07 hide.long 0x00 "DTXFSTS13,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" hgroup.long 0xAC0++0x03 "Device IN Endpoint 14" hide.long 0x00 "DIEPCTL14,Device Endpoint 14 Control Regist" hgroup.long (0xAC0+0x08)++0x03 hide.long 0x00 "DIEPINT14,Device Endpoint-14 Interrupt Register" hgroup.long (0xAC0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ14,Device Endpoint-14 Transfer Size Register" hgroup.long (0xAC0+0x14)++0x03 hide.long 0x00 "DIEPDMA14,Device Endpoint-14 DMA Address Register" hgroup.long (0xAC0+0x18)++0x07 hide.long 0x00 "DTXFSTS14,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" hgroup.long 0xAE0++0x03 "Device IN Endpoint 15" hide.long 0x00 "DIEPCTL15,Device Endpoint 15 Control Regist" hgroup.long (0xAE0+0x08)++0x03 hide.long 0x00 "DIEPINT15,Device Endpoint-15 Interrupt Register" hgroup.long (0xAE0+0x10)++0x03 hide.long 0x00 "DIEPTSIZ15,Device Endpoint-15 Transfer Size Register" hgroup.long (0xAE0+0x14)++0x03 hide.long 0x00 "DIEPDMA15,Device Endpoint-15 DMA Address Register" hgroup.long (0xAE0+0x18)++0x07 hide.long 0x00 "DTXFSTS15,Device IN Endpoint Transmit FIFO Status Register" hide.long 0x04 "DIEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" hgroup.long 0xB00++0x03 "Device OUT Endpoint 0" hide.long 0x00 "DOEPCTL0,Device Control OUT Endpoint 0 Control Register" hgroup.long (0xB00+0x08)++0x03 hide.long 0x00 "DOEPINT0,Device Endpoint-0 Interrupt Register" hgroup.long (0xB00+0x10)++0x03 hide.long 0x00 "DOEPTSIZ0,Device Endpoint 0 Transfer Size Register" hgroup.long (0xB00+0x14)++0x03 hide.long 0x00 "DOEPDMA0,Device Endpoint-0 DMA Address Register" hgroup.long (0xB00+0x1C)++0x03 hide.long 0x00 "DOEPDMAB0,Device Endpoint-0 DMA Buffer Address Register" hgroup.long 0xB20++0x03 "Device OUT Endpoint 1" hide.long 0x00 "DOEPCTL1,Device Endpoint-1 Control Register" hgroup.long (0xB20+0x08)++0x03 hide.long 0x00 "DOEPINT1,Device Endpoint-1 Interrupt Register" hgroup.long (0xB20+0x10)++0x03 hide.long 0x00 "DOEPTSIZ1,Device Endpoint-1 Transfer Size Register" hgroup.long (0xB20+0x14)++0x03 hide.long 0x00 "DOEPDMA1,Device Endpoint-1 DMA Address Register" hgroup.long (0xB20+0x1C)++0x03 hide.long 0x00 "DOEPDMAB1,Device Endpoint-1 DMA Buffer Address Register" hgroup.long 0xB40++0x03 "Device OUT Endpoint 2" hide.long 0x00 "DOEPCTL2,Device Endpoint-2 Control Register" hgroup.long (0xB40+0x08)++0x03 hide.long 0x00 "DOEPINT2,Device Endpoint-2 Interrupt Register" hgroup.long (0xB40+0x10)++0x03 hide.long 0x00 "DOEPTSIZ2,Device Endpoint-2 Transfer Size Register" hgroup.long (0xB40+0x14)++0x03 hide.long 0x00 "DOEPDMA2,Device Endpoint-2 DMA Address Register" hgroup.long (0xB40+0x1C)++0x03 hide.long 0x00 "DOEPDMAB2,Device Endpoint-2 DMA Buffer Address Register" hgroup.long 0xB60++0x03 "Device OUT Endpoint 3" hide.long 0x00 "DOEPCTL3,Device Endpoint-3 Control Register" hgroup.long (0xB60+0x08)++0x03 hide.long 0x00 "DOEPINT3,Device Endpoint-3 Interrupt Register" hgroup.long (0xB60+0x10)++0x03 hide.long 0x00 "DOEPTSIZ3,Device Endpoint-3 Transfer Size Register" hgroup.long (0xB60+0x14)++0x03 hide.long 0x00 "DOEPDMA3,Device Endpoint-3 DMA Address Register" hgroup.long (0xB60+0x1C)++0x03 hide.long 0x00 "DOEPDMAB3,Device Endpoint-3 DMA Buffer Address Register" hgroup.long 0xB80++0x03 "Device OUT Endpoint 4" hide.long 0x00 "DOEPCTL4,Device Endpoint-4 Control Register" hgroup.long (0xB80+0x08)++0x03 hide.long 0x00 "DOEPINT4,Device Endpoint-4 Interrupt Register" hgroup.long (0xB80+0x10)++0x03 hide.long 0x00 "DOEPTSIZ4,Device Endpoint-4 Transfer Size Register" hgroup.long (0xB80+0x14)++0x03 hide.long 0x00 "DOEPDMA4,Device Endpoint-4 DMA Address Register" hgroup.long (0xB80+0x1C)++0x03 hide.long 0x00 "DOEPDMAB4,Device Endpoint-4 DMA Buffer Address Register" hgroup.long 0xBA0++0x03 "Device OUT Endpoint 5" hide.long 0x00 "DOEPCTL5,Device Endpoint-5 Control Register" hgroup.long (0xBA0+0x08)++0x03 hide.long 0x00 "DOEPINT5,Device Endpoint-5 Interrupt Register" hgroup.long (0xBA0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ5,Device Endpoint-5 Transfer Size Register" hgroup.long (0xBA0+0x14)++0x03 hide.long 0x00 "DOEPDMA5,Device Endpoint-5 DMA Address Register" hgroup.long (0xBA0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB5,Device Endpoint-5 DMA Buffer Address Register" hgroup.long 0xBC0++0x03 "Device OUT Endpoint 6" hide.long 0x00 "DOEPCTL6,Device Endpoint-6 Control Register" hgroup.long (0xBC0+0x08)++0x03 hide.long 0x00 "DOEPINT6,Device Endpoint-6 Interrupt Register" hgroup.long (0xBC0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ6,Device Endpoint-6 Transfer Size Register" hgroup.long (0xBC0+0x14)++0x03 hide.long 0x00 "DOEPDMA6,Device Endpoint-6 DMA Address Register" hgroup.long (0xBC0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB6,Device Endpoint-6 DMA Buffer Address Register" hgroup.long 0xBE0++0x03 "Device OUT Endpoint 7" hide.long 0x00 "DOEPCTL7,Device Endpoint-7 Control Register" hgroup.long (0xBE0+0x08)++0x03 hide.long 0x00 "DOEPINT7,Device Endpoint-7 Interrupt Register" hgroup.long (0xBE0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ7,Device Endpoint-7 Transfer Size Register" hgroup.long (0xBE0+0x14)++0x03 hide.long 0x00 "DOEPDMA7,Device Endpoint-7 DMA Address Register" hgroup.long (0xBE0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB7,Device Endpoint-7 DMA Buffer Address Register" hgroup.long 0xC00++0x03 "Device OUT Endpoint 8" hide.long 0x00 "DOEPCTL8,Device Endpoint-8 Control Register" hgroup.long (0xC00+0x08)++0x03 hide.long 0x00 "DOEPINT8,Device Endpoint-8 Interrupt Register" hgroup.long (0xC00+0x10)++0x03 hide.long 0x00 "DOEPTSIZ8,Device Endpoint-8 Transfer Size Register" hgroup.long (0xC00+0x14)++0x03 hide.long 0x00 "DOEPDMA8,Device Endpoint-8 DMA Address Register" hgroup.long (0xC00+0x1C)++0x03 hide.long 0x00 "DOEPDMAB8,Device Endpoint-8 DMA Buffer Address Register" hgroup.long 0xC20++0x03 "Device OUT Endpoint 9" hide.long 0x00 "DOEPCTL9,Device Endpoint-9 Control Register" hgroup.long (0xC20+0x08)++0x03 hide.long 0x00 "DOEPINT9,Device Endpoint-9 Interrupt Register" hgroup.long (0xC20+0x10)++0x03 hide.long 0x00 "DOEPTSIZ9,Device Endpoint-9 Transfer Size Register" hgroup.long (0xC20+0x14)++0x03 hide.long 0x00 "DOEPDMA9,Device Endpoint-9 DMA Address Register" hgroup.long (0xC20+0x1C)++0x03 hide.long 0x00 "DOEPDMAB9,Device Endpoint-9 DMA Buffer Address Register" hgroup.long 0xC40++0x03 "Device OUT Endpoint 10" hide.long 0x00 "DOEPCTL10,Device Endpoint-10 Control Register" hgroup.long (0xC40+0x08)++0x03 hide.long 0x00 "DOEPINT10,Device Endpoint-10 Interrupt Register" hgroup.long (0xC40+0x10)++0x03 hide.long 0x00 "DOEPTSIZ10,Device Endpoint-10 Transfer Size Register" hgroup.long (0xC40+0x14)++0x03 hide.long 0x00 "DOEPDMA10,Device Endpoint-10 DMA Address Register" hgroup.long (0xC40+0x1C)++0x03 hide.long 0x00 "DOEPDMAB10,Device Endpoint-10 DMA Buffer Address Register" hgroup.long 0xC60++0x03 "Device OUT Endpoint 11" hide.long 0x00 "DOEPCTL11,Device Endpoint-11 Control Register" hgroup.long (0xC60+0x08)++0x03 hide.long 0x00 "DOEPINT11,Device Endpoint-11 Interrupt Register" hgroup.long (0xC60+0x10)++0x03 hide.long 0x00 "DOEPTSIZ11,Device Endpoint-11 Transfer Size Register" hgroup.long (0xC60+0x14)++0x03 hide.long 0x00 "DOEPDMA11,Device Endpoint-11 DMA Address Register" hgroup.long (0xC60+0x1C)++0x03 hide.long 0x00 "DOEPDMAB11,Device Endpoint-11 DMA Buffer Address Register" hgroup.long 0xC80++0x03 "Device OUT Endpoint 12" hide.long 0x00 "DOEPCTL12,Device Endpoint-12 Control Register" hgroup.long (0xC80+0x08)++0x03 hide.long 0x00 "DOEPINT12,Device Endpoint-12 Interrupt Register" hgroup.long (0xC80+0x10)++0x03 hide.long 0x00 "DOEPTSIZ12,Device Endpoint-12 Transfer Size Register" hgroup.long (0xC80+0x14)++0x03 hide.long 0x00 "DOEPDMA12,Device Endpoint-12 DMA Address Register" hgroup.long (0xC80+0x1C)++0x03 hide.long 0x00 "DOEPDMAB12,Device Endpoint-12 DMA Buffer Address Register" hgroup.long 0xCA0++0x03 "Device OUT Endpoint 13" hide.long 0x00 "DOEPCTL13,Device Endpoint-13 Control Register" hgroup.long (0xCA0+0x08)++0x03 hide.long 0x00 "DOEPINT13,Device Endpoint-13 Interrupt Register" hgroup.long (0xCA0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ13,Device Endpoint-13 Transfer Size Register" hgroup.long (0xCA0+0x14)++0x03 hide.long 0x00 "DOEPDMA13,Device Endpoint-13 DMA Address Register" hgroup.long (0xCA0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB13,Device Endpoint-13 DMA Buffer Address Register" hgroup.long 0xCC0++0x03 "Device OUT Endpoint 14" hide.long 0x00 "DOEPCTL14,Device Endpoint-14 Control Register" hgroup.long (0xCC0+0x08)++0x03 hide.long 0x00 "DOEPINT14,Device Endpoint-14 Interrupt Register" hgroup.long (0xCC0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ14,Device Endpoint-14 Transfer Size Register" hgroup.long (0xCC0+0x14)++0x03 hide.long 0x00 "DOEPDMA14,Device Endpoint-14 DMA Address Register" hgroup.long (0xCC0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB14,Device Endpoint-14 DMA Buffer Address Register" hgroup.long 0xCE0++0x03 "Device OUT Endpoint 15" hide.long 0x00 "DOEPCTL15,Device Endpoint-15 Control Register" hgroup.long (0xCE0+0x08)++0x03 hide.long 0x00 "DOEPINT15,Device Endpoint-15 Interrupt Register" hgroup.long (0xCE0+0x10)++0x03 hide.long 0x00 "DOEPTSIZ15,Device Endpoint-15 Transfer Size Register" hgroup.long (0xCE0+0x14)++0x03 hide.long 0x00 "DOEPDMA15,Device Endpoint-15 DMA Address Register" hgroup.long (0xCE0+0x1C)++0x03 hide.long 0x00 "DOEPDMAB15,Device Endpoint-15 DMA Buffer Address Register" endif tree.end width 9. tree "Power and Clock Gating Register" group.long 0x0E00++0x03 line.long 0x00 "PCGCCTL,Power and Clock Gating Control Register" rbitfld.long 0x00 7. " L1SUSPENDED ,Deep Sleep" "Disabled,Enabled" rbitfld.long 0x00 6. " PHYSLEEP ,PHY In Sleep" "Disabled,Enabled" bitfld.long 0x00 3. " RSTPDWNMODULE ,Reset Power-Down Modules" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " STOPPCLK ,Stop Pclk" "No,Yes" tree.end width 0x0B tree.end tree.end tree "NANDREGS (NAND Flash Controller Module Registers)" base ad:0xFFB80000 width 27. tree "Configuration registers" group.long 0x00++0x03 line.long 0x00 "DEVICE_RESET,Device reset" bitfld.long 0x00 3. " BANK3 ,Issues reset to bank 3" "No reset,Reset" bitfld.long 0x00 2. " BANK2 ,Issues reset to bank 2" "No reset,Reset" bitfld.long 0x00 1. " BANK1 ,Issues reset to bank 1" "No reset,Reset" bitfld.long 0x00 0. " BANK0 ,Issues reset to bank 0" "No reset,Reset" group.long 0x10++0x03 line.long 0x00 "TRANSFER_SPARE_REG,Default data transfer mode register" bitfld.long 0x00 0. " FLAG ,Flag" "Main,Main & Spare" group.long 0x20++0x03 line.long 0x00 "LOAD_WAIT_CNT,Wait count value for Load operation register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Number of clock cycles after issue of load operation before NAND Flash Controller polls for status" group.long 0x30++0x03 line.long 0x00 "PROGRAM_WAIT_CNT,Wait count value for Program operation register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Number of clock cycles after issue of program operation before NAND Flash Controller polls for status" group.long 0x40++0x03 line.long 0x00 "ERASE_WAIT_CNT,Wait count value for Erase operation register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Number of clock cycles after issue of erase operation before NAND Flash Controller polls for status" group.long 0x50++0x03 line.long 0x00 "INT_MON_CYCCNT,Interrupt monitor cycle count value register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Denali Flash Controller cycles number" group.long 0x60++0x03 line.long 0x00 "RB_PIN_ENABLED,Interrupt or polling mode register" bitfld.long 0x00 3. " BANK3 ,Ready/Busy pin enable 3" "Disabled,Enabled" bitfld.long 0x00 2. " BANK2 ,Ready/Busy pin enable 2" "Disabled,Enabled" bitfld.long 0x00 1. " BANK1 ,Ready/Busy pin enable 1" "Disabled,Enabled" bitfld.long 0x00 0. " BANK0 ,Ready/Busy pin enable 0" "Disabled,Enabled" group.long 0x70++0x03 line.long 0x00 "MULTIPLANE_OPERATION,Multiplane transfer mode" bitfld.long 0x00 0. " FLAG ,Multiplane operation enable" "Disabled,Enabled" group.long 0x80++0x03 line.long 0x00 "MULTIPLANE_READ_ENABLE,Multiplane read command status register" bitfld.long 0x00 0. " FLAG ,Multiplane read enable" "Disabled,Enabled" group.long 0x90++0x03 line.long 0x00 "COPYBACK_DISABLE,Copyback Command Status Register" bitfld.long 0x00 0. " FLAG ,Copyback disabled" "No,Yes" group.long 0xA0++0x03 line.long 0x00 "CACHE_WRITE_ENABLE,Cache write command status register" bitfld.long 0x00 0. " FLAG ,Cache write enable" "Disabled,Enabled" group.long 0xB0++0x03 line.long 0x00 "CACHE_READ_ENABLE,Cache read command status register" bitfld.long 0x00 0. " FLAG ,Cache read enable" "Disabled,Enabled" group.long 0xC0++0x03 line.long 0x00 "PREFETCH_MODE,Read data prefetching enable register" hexmask.long.word 0x00 4.--15. 1. " PREFETCH_BURST_LENGTH ,Prefetch burst length" bitfld.long 0x00 0. " PREFETCH_EN ,Data prefetch enable" "Disabled,Enabled" group.long 0xD0++0x03 line.long 0x00 "CHIP_ENABLE_DONT_CARE,Chip enable don't care mode register" bitfld.long 0x00 0. " FLAG ,Dont care mode" "Disabled,Enabled" group.long 0xE0++0x03 line.long 0x00 "ECC_ENABLE,Controller ECC check bit generation and correction enable register" bitfld.long 0x00 0. " FLAG ,ECC enable" "Disabled,Enabled" group.long 0xF0++0x03 line.long 0x00 "GLOBAL_INT_ENABLE,Global Interrupt enable and Error/Timeout disable register" bitfld.long 0x00 8. " ERROR_RPT_DISABLE ,Error repeat disable" "No,Yes" bitfld.long 0x00 4. " TIMEOUT_DISABLE ,Timeout disable" "No,Yes" bitfld.long 0x00 0. " FLAG ,Interrupt receive enable" "Disabled,Enabled" group.long 0x100++0x03 line.long 0x00 "TWHR2_AND_WE_2_RE,TWHR2_AND_WE_2_RE" bitfld.long 0x00 8.--13. " TWHR2 ,Number of controller clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. " WE_2_RE ,Number of bus interface nand_mp_clk clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x110++0x03 line.long 0x00 "TCWAW_AND_ADDR_2_DATA,TCWAW_AND_ADDR_2_DATA" bitfld.long 0x00 8.--13. " TCWAW ,Number of controller clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" sif cpu()=="ARRIA10SOC" textline " " hexmask.long.byte 0x00 0.--6. 1. " ADDR_2_DATA ,Number of bus interface clk_x clocks" else textline " " bitfld.long 0x00 0.--5. " ADDR_2_DATA ,Number of bus interface nand_mp_clk clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" endif group.long 0x120++0x03 line.long 0x00 "RE_2_WE,Timing parameter between re high to we low register" bitfld.long 0x00 0.--5. " VALUE ,Number of bus interface nand_mp_clk clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x130++0x03 line.long 0x00 "ACC_CLKS,Timing parameter from read enable going low to capture read data register" bitfld.long 0x00 0.--3. " VALUE ,Number of bus interface nand_mp_clk clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x140++0x03 line.long 0x00 "NUMBER_OF_PLANES,Number of planes in the device register" bitfld.long 0x00 0.--2. " VALUE ,Number of planes" "1,2,,4,,,,8" group.long 0x150++0x03 line.long 0x00 "PAGES_PER_BLOCK,Number of pages in a block register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Pages per block" group.long 0x160++0x03 line.long 0x00 "DEVICE_WIDTH,I/O width of attached devices register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 0.--1. " VALUE ,Device width" "8 bit,16 bit,?..." else bitfld.long 0x00 0.--1. " VALUE ,Device width" "8 bit,?..." endif group.long 0x170++0x03 line.long 0x00 "DEVICE_MAIN_AREA_SIZE,Page main area size of device register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Page main area size" group.long 0x180++0x03 line.long 0x00 "DEVICE_SPARE_AREA_SIZE,Page spare area size of device register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Page spare area size" group.long 0x190++0x03 line.long 0x00 "TWO_ROW_ADDR_CYCLES,Address cycle register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 0. 4. " FLAG ,Two row/Four row cycles flag" "3 row,2 row,4 row,4 row" else bitfld.long 0x00 0. " FLAG ,Two row cycles flag" "3 row,2 row" endif group.long 0x1A0++0x03 line.long 0x00 "MULTIPLANE_ADDR_RESTRICT,Address restriction for multiplane commands register" bitfld.long 0x00 0. " FLAG ,Address restriction flag" "Not restricted,Restricted" group.long 0x1B0++0x03 line.long 0x00 "ECC_CORRECTION,Correction capability register" sif cpu()=="ARRIA10SOC" hexmask.long.word 0x00 16.--31. 1. " ERASE_THRESHOLD ,Zeros count to consider page as erased" textline " " endif hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Required correction capability" group.long 0x1C0++0x03 line.long 0x00 "READ_MODE,Read mode register" bitfld.long 0x00 0.--3. " VALUE ,Read mode" "0,1,2,3,4,5,6,7,8,?..." group.long 0x1D0++0x03 line.long 0x00 "WRITE_MODE,Write mode register" bitfld.long 0x00 0.--3. " VALUE ,Write mode" "0,1,2,3,4,5,?..." group.long 0x1E0++0x03 line.long 0x00 "COPYBACK_MODE,Copyback mode register" bitfld.long 0x00 0.--3. " VALUE ,Copyback mode" "0,1,2,3,4,5,6,7,?..." group.long 0x1F0++0x03 line.long 0x00 "RDWR_EN_LO_CNT,Read/Write Enable low pulse width register" bitfld.long 0x00 0.--4. " VALUE ,Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x200++0x03 line.long 0x00 "RDWR_EN_HI_CNT,Read/Write Enable high pulse width register" bitfld.long 0x00 0.--4. " VALUE ,Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x210++0x03 line.long 0x00 "MAX_RD_DELAY,Max round trip read data delay for data capture register" bitfld.long 0x00 0.--3. " VALUE ,Delay value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x220++0x03 line.long 0x00 "CS_SETUP_CNT,Chip select setup time register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 12.--17. " TWB ,Number of clk_x cycles required for meeting the tWB time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--4. " VALUE ,Number of clk_x cycles required for meeting chip select setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" else bitfld.long 0x00 0.--4. " VALUE ,Number of nand_mp_clk cycles cycles required for meeting chip select setup time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" endif group.long 0x230++0x03 line.long 0x00 "SPARE_AREA_SKIP_BYTES,Spare area skip bytes register" bitfld.long 0x00 0.--5. " VALUE ,Number of bytes to skip from start of spare area" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x240++0x03 line.long 0x00 "SPARE_AREA_MARKER,Spare area marker value register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Marker value" group.long 0x250++0x03 line.long 0x00 "DEVICES_CONNECTED,Number of Devices connected register" bitfld.long 0x00 0.--2. " VALUE ,Number of devices connected to a bank" "0,1,2,3,4,5,6,7" group.long 0x260++0x03 line.long 0x00 "DIE_MASK,Die differentiator register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Die mask value" group.long 0x270++0x03 line.long 0x00 "FIRST_BLOCK_OF_NEXT_PLANE,Next plane register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Plane structure" group.long 0x280++0x03 line.long 0x00 "WRITE_PROTECT,Write protect register" bitfld.long 0x00 0. " FLAG ,WP#pin assertion status" "Not asserted,Asserted" group.long 0x290++0x03 line.long 0x00 "RE_2_RE,Timing parameter between re high to re low (Trhz) for the next bank register" bitfld.long 0x00 0.--5. " VALUE ,Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2A0++0x03 line.long 0x00 "POR_RESET_COUNT,Reset counter register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Number of cycles to wait before issuing the first RESET command to the device" group.long 0x2B0++0x03 line.long 0x00 "WATCHDOG_RESET_COUNT,Watchdog reset counter register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Number of cycles to wait before issuing a watchdog timeout interrupt" tree.end width 36. tree "Device parameters" group.long 0x300++0x03 line.long 0x00 "MANUFACTURER_ID,Manufacturer ID register" hexmask.long.word 0x00 0.--7. 1. " VALUE ,Manufacturer ID value" rgroup.long 0x310++0x03 line.long 0x00 "DEVICE_ID,Device ID register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Device ID value" rgroup.long 0x320++0x03 line.long 0x00 "DEVICE_PARAM_0,Device parameter register 0" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,3rd byte relating to Device Signature" rgroup.long 0x330++0x03 line.long 0x00 "DEVICE_PARAM_1,Device parameter register 1" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,4rd byte relating to Device Signature" hgroup.long 0x340++0x03 hide.long 0x00 "DEVICE_PARAM_2,Device parameter register 2" rgroup.long 0x350++0x03 line.long 0x00 "LOGICAL_PAGE_DATA_SIZE,Logical page data area size register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Logical page data area size value" rgroup.long 0x360++0x03 line.long 0x00 "LOGICAL_PAGE_SPARE_SIZE,Logical page spare area size register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Logical spare data area size value" rgroup.long 0x370++0x03 line.long 0x00 "REVISION,Controller revision number register" sif cpu()=="ARRIA10SOC" hexmask.long.byte 0x00 8.--15. 1. " MINOR ,Controller minor revision" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Controller major revision" else hexmask.long.word 0x00 0.--15. 1. " VALUE ,Controller revision number" endif rgroup.long 0x380++0x03 line.long 0x00 "ONFI_DEVICE_FEATURES,ONFI device features register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 12. " VALUE12 ,External Vpp support" "Not supported,Supported" bitfld.long 0x00 11. " VALUE11 ,Volume addressing support" "Not supported,Supported" textline " " bitfld.long 0x00 10. " VALUE10 ,NV-DDR2 support" "Not supported,Supported" bitfld.long 0x00 9. " VALUE9 ,EZNAND support" "Not supported,Supported" textline " " endif bitfld.long 0x00 8. " VALUE8 ,Program page register clear enhancement support" "Not supported,Supported" bitfld.long 0x00 7. " VALUE7 ,Extended parameter page support" "Not supported,Supported" bitfld.long 0x00 6. " VALUE6 ,Interleaved read operations support" "Not supported,Supported" textline " " bitfld.long 0x00 5. " VALUE5 ,Source synchronous support" "Not supported,Supported" bitfld.long 0x00 4. " VALUE4 ,Odd to even page copyback support" "Not supported,Supported" bitfld.long 0x00 3. " VALUE3 ,Interleaved program and erase operations support" "Not supported,Supported" textline " " bitfld.long 0x00 2. " VALUE2 ,Non-sequential page programming support" "Not supported,Supported" bitfld.long 0x00 1. " VALUE1 ,Multiple LUN operations support" "Not supported,Supported" bitfld.long 0x00 0. " VALUE0 ,16 bit data bus width support" "Not supported,Supported" rgroup.long 0x390++0x03 line.long 0x00 "ONFI_OPTIONAL_COMMANDS,ONFI optional commands register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 11. " VALUE11 ,ODT Configure support" "Not supported,Supported" bitfld.long 0x00 10. " VALUE10 ,Volume Select support" "Not supported,Supported" textline " " endif bitfld.long 0x00 9. " VALUE9 ,RESET Lun support" "Not supported,Supported" bitfld.long 0x00 8. " VALUE8 ,Change small data move support" "Not supported,Supported" bitfld.long 0x00 7. " VALUE7 ,Change row address support" "Not supported,Supported" textline " " bitfld.long 0x00 6. " VALUE6 ,Change Read Column Enhanced support" "Not supported,Supported" bitfld.long 0x00 5. " VALUE5 ,Read Unique Id support" "Not supported,Supported" bitfld.long 0x00 4. " VALUE4 ,Copyback support" "Not supported,Supported" textline " " bitfld.long 0x00 3. " VALUE3 ,Read status enhanced commands support" "Not supported,Supported" bitfld.long 0x00 2. " VALUE2 ,Get and set features support" "Not supported,Supported" bitfld.long 0x00 1. " VALUE1 ,Read cache commands support" "Not supported,Supported" textline " " bitfld.long 0x00 0. " VALUE0 ,Page cache program command support" "Not supported,Supported" rgroup.long 0x3A0++0x03 line.long 0x00 "ONFI_TIMING_MODE,ONFI device timing mode register" bitfld.long 0x00 5. " VALUE5 ,Timing mode 5" "Not supported,Supported" bitfld.long 0x00 4. " VALUE4 ,Timing mode 4" "Not supported,Supported" bitfld.long 0x00 3. " VALUE3 ,Timing mode 3" "Not supported,Supported" textline " " bitfld.long 0x00 2. " VALUE2 ,Timing mode 2" "Not supported,Supported" bitfld.long 0x00 1. " VALUE1 ,Timing mode 1" "Not supported,Supported" bitfld.long 0x00 0. " VALUE0 ,Timing mode 0" "Not supported,Supported" rgroup.long 0x3B0++0x03 line.long 0x00 "ONFI_PGM_CACHE_TIMING_MODE,Asynchronous Program Cache Timing modes register" bitfld.long 0x00 5. " VALUE5 ,Timing mode 5" "Not supported,Supported" bitfld.long 0x00 4. " VALUE4 ,Timing mode 4" "Not supported,Supported" bitfld.long 0x00 3. " VALUE3 ,Timing mode 3" "Not supported,Supported" textline " " bitfld.long 0x00 2. " VALUE2 ,Timing mode 2" "Not supported,Supported" bitfld.long 0x00 1. " VALUE1 ,Timing mode 1" "Not supported,Supported" bitfld.long 0x00 0. " VALUE0 ,Timing mode 0" "Not supported,Supported" group.long 0x3C0++0x03 line.long 0x00 "ONFI_DEVICE_NO_OF_LUNS,ONFI number of luns register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 20. " CE_REDUCTION_VOLUME_ADDR_AND_CHANGE ,CE pin reduction with volume assignments/volume addressing/volume change command sequence support" "Not supported,Supported" textline " " bitfld.long 0x00 16. " ONFI_JEDEC_MULTIPLANE_ERASE_SEQ ,ONFI JEDEC Multiplane erase sequence support" "Not supported,Supported" textline " " bitfld.long 0x00 12. " PROG_PAGE_REG_CLEAR_ENHANCEMENT ,Program page register clear enhancement support" "Not supported,Supported" textline " " endif rbitfld.long 0x00 8. " ONFI_DEVICE ,ONFI compliant device status" "Not compliant,Compliant" hexmask.long.byte 0x00 0.--7. 1. " NO_OF_LUNS ,Number of luns" rgroup.long 0x3D0++0x03 line.long 0x00 "ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L,Lower bits of number of blocks per LUN" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Number of blocks per LUN" rgroup.long 0x3E0++0x03 line.long 0x00 "ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U,Upper bits of number of blocks per LUN" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Number of blocks per LUN" rgroup.long 0x3F0++0x03 line.long 0x00 "FEATURES,Features register" bitfld.long 0x00 13. " LBA ,Toshiba LBA devices support status" "Not supported,Supported" bitfld.long 0x00 12. " DFI_INTF ,ONFI2.x synchronous interface support status" "Not supported,Supported" bitfld.long 0x00 11. " INDEX_ADDR ,Indexed addressing support status" "Not supported,Supported" textline " " bitfld.long 0x00 10. " GPREG ,General purpose registers present status" "Not present,Present" bitfld.long 0x00 9. " XDMA_SIDEBAND ,Side band DMA present status" "Not present,Present" bitfld.long 0x00 8. " PARTITION ,Partition present status" "Not present,Present" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 7. " CMD_DMA ,CMD_DMA present status" "Not present,Present" textline " " endif bitfld.long 0x00 6. " DMA ,DATA-DMA present status" "Not present,Present" bitfld.long 0x00 0.--1. " N_BANKS ,Maximum number of banks supported by hardware" "2,4,8,16" tree.end width 17. tree "Interrupt and Status Registers" rgroup.long 0x400++0x03 line.long 0x00 "TRANSFER_MODE,Transfer mode register" bitfld.long 0x00 6.--7. " VALUE3 ,Bank 3 transfer mode" "Main,Spare,Main+Spare,?..." bitfld.long 0x00 4.--5. " VALUE2 ,Bank 2 transfer mode" "Main,Spare,Main+Spare,?..." bitfld.long 0x00 2.--3. " VALUE1 ,Bank 1 transfer mode" "Main,Spare,Main+Spare,?..." textline " " bitfld.long 0x00 0.--1. " VALUE0 ,Bank 0 transfer mode" "Main,Spare,Main+Spare,?..." group.long 0x410++0x03 line.long 0x00 "INTR_STATUS0,Interrupt status register for bank 0" sif cpu()=="ARRIA10SOC" eventfld.long 0x00 16. " ERASED_PAGE ,Erased page detected on read" "Not detected,Detected" textline " " endif eventfld.long 0x00 15. " PAGE_XFER_INC ,Page increment" "0,1" eventfld.long 0x00 14. " PIPE_CMD_ERR ,Pipeline command error" "No error,Error" eventfld.long 0x00 13. " RST_COMP ,Reset complete" "Not completed,Completed" textline " " eventfld.long 0x00 12. " INT_ACT ,R/B pin of device transitioned from low to high " "No,Yes" eventfld.long 0x00 11. " UNSUP_CMD ,Unsupported command receive" "Not received,Received" eventfld.long 0x00 10. " LOCKED_BLK ,Block lock" "Not locked,Locked" textline " " eventfld.long 0x00 9. " PIPE_CPYBCK_CMD_COMP ,Pipeline command complete" "Not completed,Completed" eventfld.long 0x00 8. " ERASE_COMP ,Erase complete" "Not completed,Completed" eventfld.long 0x00 7. " PROGRAM_COMP ,Program complete" "Not completed,Completed" textline " " eventfld.long 0x00 6. " LOAD_COMP ,Load command complete" "Not completed,Completed" eventfld.long 0x00 5. " ERASE_FAIL ,Erase failure" "No error,Error" eventfld.long 0x00 4. " PROGRAM_FAIL ,Program failure" "No error,Error" textline " " eventfld.long 0x00 3. " TIME_OUT ,Watchdog timeout" "No timeout,Timeout" textline " " sif cpu()=="ARRIA10SOC" eventfld.long 0x00 2. " DMA_CMD_COMP ,DMA command completed" "Not completed,Completed" textline " " endif eventfld.long 0x00 0. " ECC_UNCOR_ERR ,Ecc uncorrectable error" "No error,Error" group.long (0x410+0x10)++0x03 line.long 0x00 "INTR_EN0,Interrupt enable register 0" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 16. " ERASED_PAGE ,Erased page detected on read" "Disabled,Enabled" textline " " endif bitfld.long 0x00 15. " PAGE_XFER_INC ,Page increment" "Disabled,Enabled" bitfld.long 0x00 14. " PIPE_CMD_ERR ,Pipeline command error" "Disabled,Enabled" bitfld.long 0x00 13. " RST_COMP ,Reset complete" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " INT_ACT ,R/B pin of device transitioned from low to high " "Disabled,Enabled" bitfld.long 0x00 11. " UNSUP_CMD ,Unsupported command receive" "Disabled,Enabled" bitfld.long 0x00 10. " LOCKED_BLK ,Block lock" "Disabled,Enabled" textline " " bitfld.long 0x00 9. " PIPE_CPYBCK_CMD_COMP ,Pipeline command complete" "Disabled,Enabled" bitfld.long 0x00 8. " ERASE_COMP ,Erase complete" "Disabled,Enabled" bitfld.long 0x00 7. " PROGRAM_COMP ,Program complete" "Disabled,Enabled" textline " " bitfld.long 0x00 6. " LOAD_COMP ,Load command complete" "Disabled,Enabled" bitfld.long 0x00 5. " ERASE_FAIL ,Erase failure" "Disabled,Enabled" bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " TIME_OUT ,Watchdog timeout" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 2. " DMA_CMD_COMP ,DMA command completed" "Disabled,Enabled" textline " " endif bitfld.long 0x00 0. " ECC_UNCOR_ERR ,Ecc uncorrectable error" "Disabled,Enabled" rgroup.long (0x410+0x20)++0x03 line.long 0x00 "PAGE_CNT0,Decrementing page count bank 0 register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Decrementing page count" rgroup.long (0x410+0x30)++0x03 line.long 0x00 "ERR_PAGE_ADDR0,Erred page address bank 0 register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Erred pages" rgroup.long (0x410+0x40)++0x03 line.long 0x00 "ERR_BLOCK_ADDR0,Erred block address bank 0 register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Erred block address" group.long 0x460++0x03 line.long 0x00 "INTR_STATUS1,Interrupt status register for bank 1" sif cpu()=="ARRIA10SOC" eventfld.long 0x00 16. " ERASED_PAGE ,Erased page detected on read" "Not detected,Detected" textline " " endif eventfld.long 0x00 15. " PAGE_XFER_INC ,Page increment" "0,1" eventfld.long 0x00 14. " PIPE_CMD_ERR ,Pipeline command error" "No error,Error" eventfld.long 0x00 13. " RST_COMP ,Reset complete" "Not completed,Completed" textline " " eventfld.long 0x00 12. " INT_ACT ,R/B pin of device transitioned from low to high " "No,Yes" eventfld.long 0x00 11. " UNSUP_CMD ,Unsupported command receive" "Not received,Received" eventfld.long 0x00 10. " LOCKED_BLK ,Block lock" "Not locked,Locked" textline " " eventfld.long 0x00 9. " PIPE_CPYBCK_CMD_COMP ,Pipeline command complete" "Not completed,Completed" eventfld.long 0x00 8. " ERASE_COMP ,Erase complete" "Not completed,Completed" eventfld.long 0x00 7. " PROGRAM_COMP ,Program complete" "Not completed,Completed" textline " " eventfld.long 0x00 6. " LOAD_COMP ,Load command complete" "Not completed,Completed" eventfld.long 0x00 5. " ERASE_FAIL ,Erase failure" "No error,Error" eventfld.long 0x00 4. " PROGRAM_FAIL ,Program failure" "No error,Error" textline " " eventfld.long 0x00 3. " TIME_OUT ,Watchdog timeout" "No timeout,Timeout" textline " " sif cpu()=="ARRIA10SOC" eventfld.long 0x00 2. " DMA_CMD_COMP ,DMA command completed" "Not completed,Completed" textline " " endif eventfld.long 0x00 0. " ECC_UNCOR_ERR ,Ecc uncorrectable error" "No error,Error" group.long (0x460+0x10)++0x03 line.long 0x00 "INTR_EN1,Interrupt enable register 1" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 16. " ERASED_PAGE ,Erased page detected on read" "Disabled,Enabled" textline " " endif bitfld.long 0x00 15. " PAGE_XFER_INC ,Page increment" "Disabled,Enabled" bitfld.long 0x00 14. " PIPE_CMD_ERR ,Pipeline command error" "Disabled,Enabled" bitfld.long 0x00 13. " RST_COMP ,Reset complete" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " INT_ACT ,R/B pin of device transitioned from low to high " "Disabled,Enabled" bitfld.long 0x00 11. " UNSUP_CMD ,Unsupported command receive" "Disabled,Enabled" bitfld.long 0x00 10. " LOCKED_BLK ,Block lock" "Disabled,Enabled" textline " " bitfld.long 0x00 9. " PIPE_CPYBCK_CMD_COMP ,Pipeline command complete" "Disabled,Enabled" bitfld.long 0x00 8. " ERASE_COMP ,Erase complete" "Disabled,Enabled" bitfld.long 0x00 7. " PROGRAM_COMP ,Program complete" "Disabled,Enabled" textline " " bitfld.long 0x00 6. " LOAD_COMP ,Load command complete" "Disabled,Enabled" bitfld.long 0x00 5. " ERASE_FAIL ,Erase failure" "Disabled,Enabled" bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " TIME_OUT ,Watchdog timeout" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 2. " DMA_CMD_COMP ,DMA command completed" "Disabled,Enabled" textline " " endif bitfld.long 0x00 0. " ECC_UNCOR_ERR ,Ecc uncorrectable error" "Disabled,Enabled" rgroup.long (0x460+0x20)++0x03 line.long 0x00 "PAGE_CNT1,Decrementing page count bank 1 register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Decrementing page count" rgroup.long (0x460+0x30)++0x03 line.long 0x00 "ERR_PAGE_ADDR1,Erred page address bank 1 register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Erred pages" rgroup.long (0x460+0x40)++0x03 line.long 0x00 "ERR_BLOCK_ADDR1,Erred block address bank 1 register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Erred block address" group.long 0x4B0++0x03 line.long 0x00 "INTR_STATUS2,Interrupt status register for bank 2" sif cpu()=="ARRIA10SOC" eventfld.long 0x00 16. " ERASED_PAGE ,Erased page detected on read" "Not detected,Detected" textline " " endif eventfld.long 0x00 15. " PAGE_XFER_INC ,Page increment" "0,1" eventfld.long 0x00 14. " PIPE_CMD_ERR ,Pipeline command error" "No error,Error" eventfld.long 0x00 13. " RST_COMP ,Reset complete" "Not completed,Completed" textline " " eventfld.long 0x00 12. " INT_ACT ,R/B pin of device transitioned from low to high " "No,Yes" eventfld.long 0x00 11. " UNSUP_CMD ,Unsupported command receive" "Not received,Received" eventfld.long 0x00 10. " LOCKED_BLK ,Block lock" "Not locked,Locked" textline " " eventfld.long 0x00 9. " PIPE_CPYBCK_CMD_COMP ,Pipeline command complete" "Not completed,Completed" eventfld.long 0x00 8. " ERASE_COMP ,Erase complete" "Not completed,Completed" eventfld.long 0x00 7. " PROGRAM_COMP ,Program complete" "Not completed,Completed" textline " " eventfld.long 0x00 6. " LOAD_COMP ,Load command complete" "Not completed,Completed" eventfld.long 0x00 5. " ERASE_FAIL ,Erase failure" "No error,Error" eventfld.long 0x00 4. " PROGRAM_FAIL ,Program failure" "No error,Error" textline " " eventfld.long 0x00 3. " TIME_OUT ,Watchdog timeout" "No timeout,Timeout" textline " " sif cpu()=="ARRIA10SOC" eventfld.long 0x00 2. " DMA_CMD_COMP ,DMA command completed" "Not completed,Completed" textline " " endif eventfld.long 0x00 0. " ECC_UNCOR_ERR ,Ecc uncorrectable error" "No error,Error" group.long (0x4B0+0x10)++0x03 line.long 0x00 "INTR_EN2,Interrupt enable register 2" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 16. " ERASED_PAGE ,Erased page detected on read" "Disabled,Enabled" textline " " endif bitfld.long 0x00 15. " PAGE_XFER_INC ,Page increment" "Disabled,Enabled" bitfld.long 0x00 14. " PIPE_CMD_ERR ,Pipeline command error" "Disabled,Enabled" bitfld.long 0x00 13. " RST_COMP ,Reset complete" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " INT_ACT ,R/B pin of device transitioned from low to high " "Disabled,Enabled" bitfld.long 0x00 11. " UNSUP_CMD ,Unsupported command receive" "Disabled,Enabled" bitfld.long 0x00 10. " LOCKED_BLK ,Block lock" "Disabled,Enabled" textline " " bitfld.long 0x00 9. " PIPE_CPYBCK_CMD_COMP ,Pipeline command complete" "Disabled,Enabled" bitfld.long 0x00 8. " ERASE_COMP ,Erase complete" "Disabled,Enabled" bitfld.long 0x00 7. " PROGRAM_COMP ,Program complete" "Disabled,Enabled" textline " " bitfld.long 0x00 6. " LOAD_COMP ,Load command complete" "Disabled,Enabled" bitfld.long 0x00 5. " ERASE_FAIL ,Erase failure" "Disabled,Enabled" bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " TIME_OUT ,Watchdog timeout" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 2. " DMA_CMD_COMP ,DMA command completed" "Disabled,Enabled" textline " " endif bitfld.long 0x00 0. " ECC_UNCOR_ERR ,Ecc uncorrectable error" "Disabled,Enabled" rgroup.long (0x4B0+0x20)++0x03 line.long 0x00 "PAGE_CNT2,Decrementing page count bank 2 register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Decrementing page count" rgroup.long (0x4B0+0x30)++0x03 line.long 0x00 "ERR_PAGE_ADDR2,Erred page address bank 2 register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Erred pages" rgroup.long (0x4B0+0x40)++0x03 line.long 0x00 "ERR_BLOCK_ADDR2,Erred block address bank 2 register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Erred block address" group.long 0x500++0x03 line.long 0x00 "INTR_STATUS3,Interrupt status register for bank 3" sif cpu()=="ARRIA10SOC" eventfld.long 0x00 16. " ERASED_PAGE ,Erased page detected on read" "Not detected,Detected" textline " " endif eventfld.long 0x00 15. " PAGE_XFER_INC ,Page increment" "0,1" eventfld.long 0x00 14. " PIPE_CMD_ERR ,Pipeline command error" "No error,Error" eventfld.long 0x00 13. " RST_COMP ,Reset complete" "Not completed,Completed" textline " " eventfld.long 0x00 12. " INT_ACT ,R/B pin of device transitioned from low to high " "No,Yes" eventfld.long 0x00 11. " UNSUP_CMD ,Unsupported command receive" "Not received,Received" eventfld.long 0x00 10. " LOCKED_BLK ,Block lock" "Not locked,Locked" textline " " eventfld.long 0x00 9. " PIPE_CPYBCK_CMD_COMP ,Pipeline command complete" "Not completed,Completed" eventfld.long 0x00 8. " ERASE_COMP ,Erase complete" "Not completed,Completed" eventfld.long 0x00 7. " PROGRAM_COMP ,Program complete" "Not completed,Completed" textline " " eventfld.long 0x00 6. " LOAD_COMP ,Load command complete" "Not completed,Completed" eventfld.long 0x00 5. " ERASE_FAIL ,Erase failure" "No error,Error" eventfld.long 0x00 4. " PROGRAM_FAIL ,Program failure" "No error,Error" textline " " eventfld.long 0x00 3. " TIME_OUT ,Watchdog timeout" "No timeout,Timeout" textline " " sif cpu()=="ARRIA10SOC" eventfld.long 0x00 2. " DMA_CMD_COMP ,DMA command completed" "Not completed,Completed" textline " " endif eventfld.long 0x00 0. " ECC_UNCOR_ERR ,Ecc uncorrectable error" "No error,Error" group.long (0x500+0x10)++0x03 line.long 0x00 "INTR_EN3,Interrupt enable register 3" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 16. " ERASED_PAGE ,Erased page detected on read" "Disabled,Enabled" textline " " endif bitfld.long 0x00 15. " PAGE_XFER_INC ,Page increment" "Disabled,Enabled" bitfld.long 0x00 14. " PIPE_CMD_ERR ,Pipeline command error" "Disabled,Enabled" bitfld.long 0x00 13. " RST_COMP ,Reset complete" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " INT_ACT ,R/B pin of device transitioned from low to high " "Disabled,Enabled" bitfld.long 0x00 11. " UNSUP_CMD ,Unsupported command receive" "Disabled,Enabled" bitfld.long 0x00 10. " LOCKED_BLK ,Block lock" "Disabled,Enabled" textline " " bitfld.long 0x00 9. " PIPE_CPYBCK_CMD_COMP ,Pipeline command complete" "Disabled,Enabled" bitfld.long 0x00 8. " ERASE_COMP ,Erase complete" "Disabled,Enabled" bitfld.long 0x00 7. " PROGRAM_COMP ,Program complete" "Disabled,Enabled" textline " " bitfld.long 0x00 6. " LOAD_COMP ,Load command complete" "Disabled,Enabled" bitfld.long 0x00 5. " ERASE_FAIL ,Erase failure" "Disabled,Enabled" bitfld.long 0x00 4. " PROGRAM_FAIL ,Program failure" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " TIME_OUT ,Watchdog timeout" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 2. " DMA_CMD_COMP ,DMA command completed" "Disabled,Enabled" textline " " endif bitfld.long 0x00 0. " ECC_UNCOR_ERR ,Ecc uncorrectable error" "Disabled,Enabled" rgroup.long (0x500+0x20)++0x03 line.long 0x00 "PAGE_CNT3,Decrementing page count bank 3 register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Decrementing page count" rgroup.long (0x500+0x30)++0x03 line.long 0x00 "ERR_PAGE_ADDR3,Erred page address bank 3 register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Erred pages" rgroup.long (0x500+0x40)++0x03 line.long 0x00 "ERR_BLOCK_ADDR3,Erred block address bank 3 register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Erred block address" tree.end width 16. tree "ECC registers" rgroup.long 0x650++0x03 line.long 0x00 "ECCCORINFO_B01,ECC Error correction Information register" bitfld.long 0x00 15. " UNCORR_ERR_B1 ,Uncorrectable error in bank1" "Not occurred,Occurred" hexmask.long.byte 0x00 8.--14. 1. " MAX_ERRORS_B1 ,Maximum of number of errors corrected per sector in Bank1" bitfld.long 0x00 7. " UNCORR_ERR_B0 ,Uncorrectable error in bank0" "Not occurred,Occurred" textline " " hexmask.long.byte 0x00 0.--6. 1. " MAX_ERRORS_B0 ,Maximum of number of errors corrected per sector in Bank0" rgroup.long 0x660++0x03 line.long 0x00 "ECCCORINFO_B23,ECC Error correction Information register" bitfld.long 0x00 15. " UNCORR_ERR_B3 ,Uncorrectable error in bank3" "Not occurred,Occurred" hexmask.long.byte 0x00 8.--14. 1. " MAX_ERRORS_B3 ,Maximum of number of errors corrected per sector in Bank3" bitfld.long 0x00 7. " UNCORR_ERR_B2 ,Uncorrectable error in bank2" "Not occurred,Occurred" textline " " hexmask.long.byte 0x00 0.--6. 1. " MAX_ERRORS_B2 ,Maximum of number of errors corrected per sector in Bank2" tree.end width 44. tree "DMA registers" group.long 0x700++0x03 line.long 0x00 "DMA_ENABLE,DMA enable register" bitfld.long 0x00 0. " FLAG ,DMA enable" "Disabled,Enabled" group.long 0x720++0x03 line.long 0x00 "DMA_INTR,DMA interrupt register" sif cpu()=="ARRIA10SOC" eventfld.long 0x00 6. " CMDDMA_IDLE ,Command DMA became IDLE after completing all descriptors" "No interrupt,Interrupt" eventfld.long 0x00 4. " DESC_COMP_CHANNEL3 ,CMD-DMA channel 3 descriptor execution done" "No interrupt,Interrupt" textline " " eventfld.long 0x00 3. " DESC_COMP_CHANNEL2 ,CMD-DMA channel 2 descriptor execution done" "No interrupt,Interrupt" eventfld.long 0x00 2. " DESC_COMP_CHANNEL1 ,CMD-DMA channel 1 descriptor execution done" "No interrupt,Interrupt" textline " " eventfld.long 0x00 1. " DESC_COMP_CHANNEL0 ,CMD-DMA channel 0 descriptor execution done" "No interrupt,Interrupt" textline " " endif eventfld.long 0x00 0. " TARGET_ERROR ,Controller initiator error receive" "Not received,Received" group.long 0x730++0x03 line.long 0x00 "DMA_INTR_EN,DMA interrupt enable register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 6. " CMDDMA_IDLE ,Command DMA became IDLE after completing all descriptors" "Disabled,Enabled" bitfld.long 0x00 4. " DESC_COMP_CHANNEL3 ,CMD-DMA channel 3 descriptor execution done" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " DESC_COMP_CHANNEL2 ,CMD-DMA channel 2 descriptor execution done" "Disabled,Enabled" bitfld.long 0x00 2. " DESC_COMP_CHANNEL1 ,CMD-DMA channel 1 descriptor execution done" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " DESC_COMP_CHANNEL0 ,CMD-DMA channel 0 descriptor execution done" "Disabled,Enabled" textline " " endif bitfld.long 0x00 0. " TARGET_ERROR ,Controller initiator error receive" "Disabled,Enabled" rgroup.long 0x740++0x03 line.long 0x00 "TARGET_ERR_ADDR_LO,Transaction error low address register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Least significant 16 bits" rgroup.long 0x750++0x03 line.long 0x00 "TARGET_ERR_ADDR_HI,Transaction error high address register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Most significant 16 bits" group.long 0x770++0x03 line.long 0x00 "FLASH_BURST_LENGTH,Flash burst length register" sif cpu()=="ARRIA10SOC" hexmask.long.tbyte 0x00 8.--31. 1. " POLLING_SYNC_COUNTER_VALUE ,Number of cycles CMDDMA channel has to wait before polling the SYNC Pointer again" textline " " endif bitfld.long 0x00 4. " CONTINOUS_BURST ,Continous burst enable" "Disabled,Enabled" bitfld.long 0x00 0.--1. " VALUE ,Burst length" "64 bytes,128 bytes,256 bytes,512 bytes" group.long 0x780++0x03 line.long 0x00 "CHIP_INTERLEAVE_ENABLE_AND_ALLOW_INT_READS,Chip interleave and allow int reads register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 8. " CMD_DMA_ERROR_ENABLE ,Command DMA Error Enable" "Disabled,Enabled" textline " " endif bitfld.long 0x00 4. " ALLOW_INT_READS_WITHIN_LUNS ,Allow int reads within luns" "Disabled,Enabled" bitfld.long 0x00 0. " CHIP_INTERLEAVE_ENABLE ,Chip interleave enable" "Disabled,Enabled" group.long 0x790++0x03 line.long 0x00 "NO_OF_BLOCKS_PER_LUN,Number of block per lun register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 28. " ISSUE_READ_BEFORE_SYNC ,Issue read before sync" "Disabled,Enabled" bitfld.long 0x00 24. " UPDATE_SYNC_BEFORE_PROG_COMP ,Update sync before program completion" "Disabled,Enabled" textline " " endif bitfld.long 0x00 0.--3. " VALUE ,First block of next LUN" "1024,2048,4096,8192,16384,32768,65536,131072,262144,524288,1048576,2097152,4194304,8388608,16777216,33554432" group.long 0x7A0++0x03 line.long 0x00 "LUN_STATUS_CMD,LUN status command register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,LUN status command" sif cpu()=="ARRIA10SOC" rgroup.long 0x760++0x03 line.long 0x00 "CHNL_ACTIVE,Command DMA Channel Activity Status" bitfld.long 0x00 3. " CHANNEL3 ,Command DMA Channel 3 Active" "Inactive,Active" bitfld.long 0x00 2. " CHANNEL2 ,Command DMA Channel 2 Active" "Inactive,Active" textline " " bitfld.long 0x00 1. " CHANNEL1 ,Command DMA Channel 1 Active" "Inactive,Active" bitfld.long 0x00 0. " CHANNEL0 ,Command DMA Channel 0 Active" "Inactive,Active" group.long 0x7C0++0x03 line.long 0x00 "CMD_DMA_CHANNEL_ERROR,Command DMA Channel Error Status" bitfld.long 0x00 3. " CHANNEL3 ,Command DMA Channel 3 Error" "No error,Error" bitfld.long 0x00 2. " CHANNEL2 ,Command DMA Channel 2 Error" "No error,Error" textline " " bitfld.long 0x00 1. " CHANNEL1 ,Command DMA Channel 1 Error" "No error,Error" bitfld.long 0x00 0. " CHANNEL0 ,Command DMA Channel 0 Error" "No error,Error" group.long 0x7C0++0x03 line.long 0x00 "CMD_DMA_CHANNEL_ERROR_EN,Command DMA Channel Error Enable" bitfld.long 0x00 3. " CHANNEL3 ,Command DMA Channel 3 Error Enable" "Disabled,Enabled" bitfld.long 0x00 2. " CHANNEL2 ,Command DMA Channel 2 Error Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " CHANNEL1 ,Command DMA Channel 1 Error Enable" "Disabled,Enabled" bitfld.long 0x00 0. " CHANNEL0 ,Command DMA Channel 0 Error Enable" "Disabled,Enabled" group.long 0x790++0x03 line.long 0x00 "RESCAN_BUFFER_FLAG,Rescan buffer flag" bitfld.long 0x00 3. " FLAG3 ,Channel 3 Rescan Buffer Flag" "No effect,Rescan" bitfld.long 0x00 2. " FLAG2 ,Channel 2 Rescan Buffer Flag" "No effect,Rescan" textline " " bitfld.long 0x00 1. " FLAG1 ,Channel 1 Rescan Buffer Flag" "No effect,Rescan" bitfld.long 0x00 0. " FLAG0 ,Channel 0 Rescan Buffer Flag" "No effect,Rescan" endif tree.end width 0x0B tree.end tree.open "CAN (CAN Controller Module)" tree "CAN 0" base ad:0xFFC00000 width 9. tree "Protocol Group" group.long 0x00++0x3 line.long 0x00 "CCTRL,Control Register" bitfld.long 0x00 19. " DE2 ,DMA Enable for IF2" "Disabled,Enabled" bitfld.long 0x00 18. " DE1 ,DMA Enable for IF1" "Disabled,Enabled" bitfld.long 0x00 17. " MIL ,Message Object Interrupt Line Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " TEST ,Test Mode Enable" "Disabled,Enabled" bitfld.long 0x00 6. " CCE ,Configuration Change Enable" "Disabled,Enabled" bitfld.long 0x00 5. " DAR ,Disable Automatic Retransmission" "No,Yes" textline " " bitfld.long 0x00 3. " EIE ,Error Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. " SIE ,Status Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. " ILE ,Module Interrupt Line Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " INIT ,Initialization" "Normal,Started" hgroup.long 0x04++0x3 hide.long 0x00 "CSTS,Status Register" in rgroup.long 0x08++0x3 line.long 0x00 "CERC,Error Counter Register" bitfld.long 0x00 15. " RP ,Receive Error Passive" "Below,Reached" hexmask.long.byte 0x00 8.--14. 1. " REC ,Receive Error Counter" hexmask.long.byte 0x00 0.--7. 1. " TEC ,Transmit Error Counter" group.long 0x0C++0x3 line.long 0x00 "CBT,Bit Timing / BRP Extension Register" bitfld.long 0x00 16.--19. " BRPE ,Baud Rate Prescaler Extension" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--14. " TSEG2 ,The time segment after the sample point" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--11. " TSEG1 ,The time segment before the sample point" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,?..." textline " " bitfld.long 0x00 6.--7. " SJW ,(Re) Synchronization Jump Width" "0,1,2,3" bitfld.long 0x00 0.--5. " BRP ,Baud Rate Prescaler" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x10++0x3 line.long 0x00 "CIR,Interrupt Register" hexmask.long.byte 0x00 0.--7. 1. " INTID ,Interrupt Identifier" bitfld.long 0x00 15. " STATUSINT ,A Status Interrupt has occurred" "Not occurred,Occurred" group.long 0x14++0x7 line.long 0x00 "CTR,Test Register" rbitfld.long 0x00 7. " RX ,Receive Pin" "Dominant,Recessive" bitfld.long 0x00 5.--6. " TX ,Transmit Pin" "Reset,Sample,Dominant,Recessive" bitfld.long 0x00 4. " LBACK ,Loop Back Mode" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " SILENT ,Silent Mode" "Disabled,Enabled" line.long 0x04 "CFR,Function Register" bitfld.long 0x04 3. " RAMINIT ,Request for automatic RAM Initialization" "Not requested,Requested" bitfld.long 0x04 1. " CLKSTREQ ,Clock Stop Request" "Not requested,Requested" rbitfld.long 0x04 0. " CLKSTACK ,Clock Stop Acknowledgement" "Not acknowledged,Acknowledged" rgroup.long 0x20++0x7 line.long 0x00 "CRR,Core Release Register" bitfld.long 0x00 28.--31. " REL ,Core Release" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 20.--27. 1. " STEP ,Step of Core Release" bitfld.long 0x00 16.--19. " YEAR ,Design Time Stamp, Year" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " hexmask.long.byte 0x00 8.--15. 1. " MON ,Design Time Stamp, Month" hexmask.long.byte 0x00 0.--7. 1. " DAY ,Design Time Stamp, Day" line.long 0x04 "HWS,Hardware Configuration Status Register" bitfld.long 0x04 2. " PAREN ,Parity Generation" "Not presented,Presented" bitfld.long 0x04 0.--1. " MB_W ,Message Buffer Count" "16,32,64,128" tree.end tree "Message Handler Group" rgroup.long 0x84++0x4F line.long 0x00 "MOTRX,Transmission Request X Register" bitfld.long 0x00 15. " TXRQSTD[3] ,TxRqstD" "Not pending,Pending" bitfld.long 0x00 14. " TXRQSTD[2] ,TxRqstD" "Not pending,Pending" bitfld.long 0x00 13. " TXRQSTD[1] ,TxRqstD" "Not pending,Pending" textline " " bitfld.long 0x00 12. " TXRQSTD[0] ,TxRqstD" "Not pending,Pending" bitfld.long 0x00 11. " TXRQSTC[3] ,TxRqstC" "Not pending,Pending" bitfld.long 0x00 10. " TXRQSTC[2] ,TxRqstC" "Not pending,Pending" textline " " bitfld.long 0x00 9. " TXRQSTC[1] ,TxRqstC" "Not pending,Pending" bitfld.long 0x00 8. " TXRQSTC[0] ,TxRqstC" "Not pending,Pending" bitfld.long 0x00 7. " TXRQSTB[3] ,TxRqstB" "Not pending,Pending" textline " " bitfld.long 0x00 6. " TXRQSTB[2] ,TxRqstB" "Not pending,Pending" bitfld.long 0x00 5. " TXRQSTB[1] ,TxRqstB" "Not pending,Pending" bitfld.long 0x00 4. " TXRQSTB[0] ,TxRqstB" "Not pending,Pending" textline " " bitfld.long 0x00 3. " TXRQSTA[3] ,TxRqstA" "Not pending,Pending" bitfld.long 0x00 2. " TXRQSTA[2] ,TxRqstA" "Not pending,Pending" bitfld.long 0x00 1. " TXRQSTA[1] ,TxRqstA" "Not pending,Pending" textline " " bitfld.long 0x00 0. " TXRQSTA[0] ,TxRqstA" "Not pending,Pending" line.long 0x04 "MOTRA,Transmission Request A Register" bitfld.long 0x04 31. " TXRQST[31] ,Transmission request bit for Message Object 32" "Not pending,Pending" bitfld.long 0x04 30. " TXRQST[30] ,Transmission request bit for Message Object 31" "Not pending,Pending" bitfld.long 0x04 29. " TXRQST[29] ,Transmission request bit for Message Object 30" "Not pending,Pending" textline " " bitfld.long 0x04 28. " TXRQST[28] ,Transmission request bit for Message Object 29" "Not pending,Pending" bitfld.long 0x04 27. " TXRQST[27] ,Transmission request bit for Message Object 28" "Not pending,Pending" bitfld.long 0x04 26. " TXRQST[26] ,Transmission request bit for Message Object 27" "Not pending,Pending" textline " " bitfld.long 0x04 25. " TXRQST[25] ,Transmission request bit for Message Object 26" "Not pending,Pending" bitfld.long 0x04 24. " TXRQST[24] ,Transmission request bit for Message Object 25" "Not pending,Pending" bitfld.long 0x04 23. " TXRQST[23] ,Transmission request bit for Message Object 24" "Not pending,Pending" textline " " bitfld.long 0x04 22. " TXRQST[22] ,Transmission request bit for Message Object 23" "Not pending,Pending" bitfld.long 0x04 21. " TXRQST[21] ,Transmission request bit for Message Object 22" "Not pending,Pending" bitfld.long 0x04 20. " TXRQST[20] ,Transmission request bit for Message Object 21" "Not pending,Pending" textline " " bitfld.long 0x04 19. " TXRQST[19] ,Transmission request bit for Message Object 20" "Not pending,Pending" bitfld.long 0x04 18. " TXRQST[18] ,Transmission request bit for Message Object 19" "Not pending,Pending" bitfld.long 0x04 17. " TXRQST[17] ,Transmission request bit for Message Object 18" "Not pending,Pending" textline " " bitfld.long 0x04 16. " TXRQST[16] ,Transmission request bit for Message Object 17" "Not pending,Pending" bitfld.long 0x04 15. " TXRQST[15] ,Transmission request bit for Message Object 16" "Not pending,Pending" bitfld.long 0x04 14. " TXRQST[14] ,Transmission request bit for Message Object 15" "Not pending,Pending" textline " " bitfld.long 0x04 13. " TXRQST[13] ,Transmission request bit for Message Object 14" "Not pending,Pending" bitfld.long 0x04 12. " TXRQST[12] ,Transmission request bit for Message Object 13" "Not pending,Pending" bitfld.long 0x04 11. " TXRQST[11] ,Transmission request bit for Message Object 12" "Not pending,Pending" textline " " bitfld.long 0x04 10. " TXRQST[10] ,Transmission request bit for Message Object 11" "Not pending,Pending" bitfld.long 0x04 9. " TXRQST[9] ,Transmission request bit for Message Object 10" "Not pending,Pending" bitfld.long 0x04 8. " TXRQST[8] ,Transmission request bit for Message Object 9" "Not pending,Pending" textline " " bitfld.long 0x04 7. " TXRQST[7] ,Transmission request bit for Message Object 8" "Not pending,Pending" bitfld.long 0x04 6. " TXRQST[6] ,Transmission request bit for Message Object 7" "Not pending,Pending" bitfld.long 0x04 5. " TXRQST[5] ,Transmission request bit for Message Object 6" "Not pending,Pending" textline " " bitfld.long 0x04 4. " TXRQST[4] ,Transmission request bit for Message Object 5" "Not pending,Pending" bitfld.long 0x04 3. " TXRQST[3] ,Transmission request bit for Message Object 4" "Not pending,Pending" bitfld.long 0x04 2. " TXRQST[2] ,Transmission request bit for Message Object 3" "Not pending,Pending" textline " " bitfld.long 0x04 1. " TXRQST[1] ,Transmission request bit for Message Object 2" "Not pending,Pending" bitfld.long 0x04 0. " TXRQST[0] ,Transmission request bit for Message Object 1" "Not pending,Pending" line.long 0x08 "MOTRB,Transmission Request B Register" bitfld.long 0x08 31. " TXRQST[31] ,Transmission request bit for Message Object 64" "Not pending,Pending" bitfld.long 0x08 30. " TXRQST[30] ,Transmission request bit for Message Object 63" "Not pending,Pending" bitfld.long 0x08 29. " TXRQST[29] ,Transmission request bit for Message Object 62" "Not pending,Pending" textline " " bitfld.long 0x08 28. " TXRQST[28] ,Transmission request bit for Message Object 61" "Not pending,Pending" bitfld.long 0x08 27. " TXRQST[27] ,Transmission request bit for Message Object 60" "Not pending,Pending" bitfld.long 0x08 26. " TXRQST[26] ,Transmission request bit for Message Object 59" "Not pending,Pending" textline " " bitfld.long 0x08 25. " TXRQST[25] ,Transmission request bit for Message Object 58" "Not pending,Pending" bitfld.long 0x08 24. " TXRQST[24] ,Transmission request bit for Message Object 57" "Not pending,Pending" bitfld.long 0x08 23. " TXRQST[23] ,Transmission request bit for Message Object 56" "Not pending,Pending" textline " " bitfld.long 0x08 22. " TXRQST[22] ,Transmission request bit for Message Object 55" "Not pending,Pending" bitfld.long 0x08 21. " TXRQST[21] ,Transmission request bit for Message Object 54" "Not pending,Pending" bitfld.long 0x08 20. " TXRQST[20] ,Transmission request bit for Message Object 53" "Not pending,Pending" textline " " bitfld.long 0x08 19. " TXRQST[19] ,Transmission request bit for Message Object 52" "Not pending,Pending" bitfld.long 0x08 18. " TXRQST[18] ,Transmission request bit for Message Object 51" "Not pending,Pending" bitfld.long 0x08 17. " TXRQST[17] ,Transmission request bit for Message Object 50" "Not pending,Pending" textline " " bitfld.long 0x08 16. " TXRQST[16] ,Transmission request bit for Message Object 49" "Not pending,Pending" bitfld.long 0x08 15. " TXRQST[15] ,Transmission request bit for Message Object 48" "Not pending,Pending" bitfld.long 0x08 14. " TXRQST[14] ,Transmission request bit for Message Object 47" "Not pending,Pending" textline " " bitfld.long 0x08 13. " TXRQST[13] ,Transmission request bit for Message Object 46" "Not pending,Pending" bitfld.long 0x08 12. " TXRQST[12] ,Transmission request bit for Message Object 45" "Not pending,Pending" bitfld.long 0x08 11. " TXRQST[11] ,Transmission request bit for Message Object 44" "Not pending,Pending" textline " " bitfld.long 0x08 10. " TXRQST[10] ,Transmission request bit for Message Object 43" "Not pending,Pending" bitfld.long 0x08 9. " TXRQST[9] ,Transmission request bit for Message Object 42" "Not pending,Pending" bitfld.long 0x08 8. " TXRQST[8] ,Transmission request bit for Message Object 41" "Not pending,Pending" textline " " bitfld.long 0x08 7. " TXRQST[7] ,Transmission request bit for Message Object 40" "Not pending,Pending" bitfld.long 0x08 6. " TXRQST[6] ,Transmission request bit for Message Object 39" "Not pending,Pending" bitfld.long 0x08 5. " TXRQST[5] ,Transmission request bit for Message Object 38" "Not pending,Pending" textline " " bitfld.long 0x08 4. " TXRQST[4] ,Transmission request bit for Message Object 37" "Not pending,Pending" bitfld.long 0x08 3. " TXRQST[3] ,Transmission request bit for Message Object 36" "Not pending,Pending" bitfld.long 0x08 2. " TXRQST[2] ,Transmission request bit for Message Object 35" "Not pending,Pending" textline " " bitfld.long 0x08 1. " TXRQST[1] ,Transmission request bit for Message Object 34" "Not pending,Pending" bitfld.long 0x08 0. " TXRQST[0] ,Transmission request bit for Message Object 33" "Not pending,Pending" line.long 0x0C "MOTRC,Transmission Request C Register" bitfld.long 0x0C 31. " TXRQST[31] ,Transmission request bit for Message Object 96" "Not pending,Pending" bitfld.long 0x0C 30. " TXRQST[30] ,Transmission request bit for Message Object 95" "Not pending,Pending" bitfld.long 0x0C 29. " TXRQST[29] ,Transmission request bit for Message Object 94" "Not pending,Pending" textline " " bitfld.long 0x0C 28. " TXRQST[28] ,Transmission request bit for Message Object 93" "Not pending,Pending" bitfld.long 0x0C 27. " TXRQST[27] ,Transmission request bit for Message Object 92" "Not pending,Pending" bitfld.long 0x0C 26. " TXRQST[26] ,Transmission request bit for Message Object 91" "Not pending,Pending" textline " " bitfld.long 0x0C 25. " TXRQST[25] ,Transmission request bit for Message Object 90" "Not pending,Pending" bitfld.long 0x0C 24. " TXRQST[24] ,Transmission request bit for Message Object 89" "Not pending,Pending" bitfld.long 0x0C 23. " TXRQST[23] ,Transmission request bit for Message Object 88" "Not pending,Pending" textline " " bitfld.long 0x0C 22. " TXRQST[22] ,Transmission request bit for Message Object 87" "Not pending,Pending" bitfld.long 0x0C 21. " TXRQST[21] ,Transmission request bit for Message Object 86" "Not pending,Pending" bitfld.long 0x0C 20. " TXRQST[20] ,Transmission request bit for Message Object 85" "Not pending,Pending" textline " " bitfld.long 0x0C 19. " TXRQST[19] ,Transmission request bit for Message Object 84" "Not pending,Pending" bitfld.long 0x0C 18. " TXRQST[18] ,Transmission request bit for Message Object 83" "Not pending,Pending" bitfld.long 0x0C 17. " TXRQST[17] ,Transmission request bit for Message Object 82" "Not pending,Pending" textline " " bitfld.long 0x0C 16. " TXRQST[16] ,Transmission request bit for Message Object 81" "Not pending,Pending" bitfld.long 0x0C 15. " TXRQST[15] ,Transmission request bit for Message Object 80" "Not pending,Pending" bitfld.long 0x0C 14. " TXRQST[14] ,Transmission request bit for Message Object 79" "Not pending,Pending" textline " " bitfld.long 0x0C 13. " TXRQST[13] ,Transmission request bit for Message Object 78" "Not pending,Pending" bitfld.long 0x0C 12. " TXRQST[12] ,Transmission request bit for Message Object 77" "Not pending,Pending" bitfld.long 0x0C 11. " TXRQST[11] ,Transmission request bit for Message Object 76" "Not pending,Pending" textline " " bitfld.long 0x0C 10. " TXRQST[10] ,Transmission request bit for Message Object 75" "Not pending,Pending" bitfld.long 0x0C 9. " TXRQST[9] ,Transmission request bit for Message Object 74" "Not pending,Pending" bitfld.long 0x0C 8. " TXRQST[8] ,Transmission request bit for Message Object 73" "Not pending,Pending" textline " " bitfld.long 0x0C 7. " TXRQST[7] ,Transmission request bit for Message Object 72" "Not pending,Pending" bitfld.long 0x0C 6. " TXRQST[6] ,Transmission request bit for Message Object 71" "Not pending,Pending" bitfld.long 0x0C 5. " TXRQST[5] ,Transmission request bit for Message Object 70" "Not pending,Pending" textline " " bitfld.long 0x0C 4. " TXRQST[4] ,Transmission request bit for Message Object 69" "Not pending,Pending" bitfld.long 0x0C 3. " TXRQST[3] ,Transmission request bit for Message Object 68" "Not pending,Pending" bitfld.long 0x0C 2. " TXRQST[2] ,Transmission request bit for Message Object 67" "Not pending,Pending" textline " " bitfld.long 0x0C 1. " TXRQST[1] ,Transmission request bit for Message Object 66" "Not pending,Pending" bitfld.long 0x0C 0. " TXRQST[0] ,Transmission request bit for Message Object 65" "Not pending,Pending" line.long 0x10 "MOTRD,Transmission Request D Register" bitfld.long 0x10 31. " TXRQST[31] ,Transmission request bit for Message Object 128" "Not pending,Pending" bitfld.long 0x10 30. " TXRQST[30] ,Transmission request bit for Message Object 127" "Not pending,Pending" bitfld.long 0x10 29. " TXRQST[29] ,Transmission request bit for Message Object 126" "Not pending,Pending" textline " " bitfld.long 0x10 28. " TXRQST[28] ,Transmission request bit for Message Object 125" "Not pending,Pending" bitfld.long 0x10 27. " TXRQST[27] ,Transmission request bit for Message Object 124" "Not pending,Pending" bitfld.long 0x10 26. " TXRQST[26] ,Transmission request bit for Message Object 123" "Not pending,Pending" textline " " bitfld.long 0x10 25. " TXRQST[25] ,Transmission request bit for Message Object 122" "Not pending,Pending" bitfld.long 0x10 24. " TXRQST[24] ,Transmission request bit for Message Object 121" "Not pending,Pending" bitfld.long 0x10 23. " TXRQST[23] ,Transmission request bit for Message Object 120" "Not pending,Pending" textline " " bitfld.long 0x10 22. " TXRQST[22] ,Transmission request bit for Message Object 119" "Not pending,Pending" bitfld.long 0x10 21. " TXRQST[21] ,Transmission request bit for Message Object 118" "Not pending,Pending" bitfld.long 0x10 20. " TXRQST[20] ,Transmission request bit for Message Object 117" "Not pending,Pending" textline " " bitfld.long 0x10 19. " TXRQST[19] ,Transmission request bit for Message Object 116" "Not pending,Pending" bitfld.long 0x10 18. " TXRQST[18] ,Transmission request bit for Message Object 115" "Not pending,Pending" bitfld.long 0x10 17. " TXRQST[17] ,Transmission request bit for Message Object 114" "Not pending,Pending" textline " " bitfld.long 0x10 16. " TXRQST[16] ,Transmission request bit for Message Object 113" "Not pending,Pending" bitfld.long 0x10 15. " TXRQST[15] ,Transmission request bit for Message Object 112" "Not pending,Pending" bitfld.long 0x10 14. " TXRQST[14] ,Transmission request bit for Message Object 111" "Not pending,Pending" textline " " bitfld.long 0x10 13. " TXRQST[13] ,Transmission request bit for Message Object 110" "Not pending,Pending" bitfld.long 0x10 12. " TXRQST[12] ,Transmission request bit for Message Object 109" "Not pending,Pending" bitfld.long 0x10 11. " TXRQST[11] ,Transmission request bit for Message Object 108" "Not pending,Pending" textline " " bitfld.long 0x10 10. " TXRQST[10] ,Transmission request bit for Message Object 107" "Not pending,Pending" bitfld.long 0x10 9. " TXRQST[9] ,Transmission request bit for Message Object 106" "Not pending,Pending" bitfld.long 0x10 8. " TXRQST[8] ,Transmission request bit for Message Object 105" "Not pending,Pending" textline " " bitfld.long 0x10 7. " TXRQST[7] ,Transmission request bit for Message Object 104" "Not pending,Pending" bitfld.long 0x10 6. " TXRQST[6] ,Transmission request bit for Message Object 103" "Not pending,Pending" bitfld.long 0x10 5. " TXRQST[5] ,Transmission request bit for Message Object 102" "Not pending,Pending" textline " " bitfld.long 0x10 4. " TXRQST[4] ,Transmission request bit for Message Object 101" "Not pending,Pending" bitfld.long 0x10 3. " TXRQST[3] ,Transmission request bit for Message Object 100" "Not pending,Pending" bitfld.long 0x10 2. " TXRQST[2] ,Transmission request bit for Message Object 99" "Not pending,Pending" textline " " bitfld.long 0x10 1. " TXRQST[1] ,Transmission request bit for Message Object 98" "Not pending,Pending" bitfld.long 0x10 0. " TXRQST[0] ,Transmission request bit for Message Object 97" "Not pending,Pending" line.long 0x14 "MONDX,New Data X Register" bitfld.long 0x14 15. " NEWDATD[3] ,MONDD new data 3" "Not written,Written" bitfld.long 0x14 14. " NEWDATD[2] ,MONDD new data 2" "Not written,Written" bitfld.long 0x14 13. " NEWDATD[1] ,MONDD new data 1" "Not written,Written" textline " " bitfld.long 0x14 12. " NEWDATD[0] ,MONDD new data 0" "Not written,Written" bitfld.long 0x14 11. " NEWDATC[3] ,MONDC new data 3" "Not written,Written" bitfld.long 0x14 10. " NEWDATC[2] ,MONDC new data 2" "Not written,Written" textline " " bitfld.long 0x14 9. " NEWDATC[1] ,MONDC new data 1" "Not written,Written" bitfld.long 0x14 8. " NEWDATC[0] ,MONDC new data 0" "Not written,Written" bitfld.long 0x14 7. " NEWDATB[3] ,MONDB new data 3" "Not written,Written" textline " " bitfld.long 0x14 6. " NEWDATB[2] ,MONDB new data 2" "Not written,Written" bitfld.long 0x14 5. " NEWDATB[1] ,MONDB new data 1" "Not written,Written" bitfld.long 0x14 4. " NEWDATB[0] ,MONDB new data 0" "Not written,Written" textline " " bitfld.long 0x14 3. " NEWDATA[3] ,MONDA new data 3" "Not written,Written" bitfld.long 0x14 2. " NEWDATA[2] ,MONDA new data 2" "Not written,Written" bitfld.long 0x14 1. " NEWDATA[1] ,MONDA new data 1" "Not written,Written" textline " " bitfld.long 0x14 0. " NEWDATA[0] ,MONDA new data 0" "Not written,Written" line.long 0x18 "MONDA,New Data A Register" bitfld.long 0x18 31. " NEWDAT[31] ,New data bits for Message Object 32" "Not written,Written" bitfld.long 0x18 30. " NEWDAT[30] ,New data bits for Message Object 31" "Not written,Written" bitfld.long 0x18 29. " NEWDAT[29] ,New data bits for Message Object 30" "Not written,Written" textline " " bitfld.long 0x18 28. " NEWDAT[28] ,New data bits for Message Object 29" "Not written,Written" bitfld.long 0x18 27. " NEWDAT[27] ,New data bits for Message Object 28" "Not written,Written" bitfld.long 0x18 26. " NEWDAT[26] ,New data bits for Message Object 27" "Not written,Written" textline " " bitfld.long 0x18 25. " NEWDAT[25] ,New data bits for Message Object 26" "Not written,Written" bitfld.long 0x18 24. " NEWDAT[24] ,New data bits for Message Object 25" "Not written,Written" bitfld.long 0x18 23. " NEWDAT[23] ,New data bits for Message Object 24" "Not written,Written" textline " " bitfld.long 0x18 22. " NEWDAT[22] ,New data bits for Message Object 23" "Not written,Written" bitfld.long 0x18 21. " NEWDAT[21] ,New data bits for Message Object 22" "Not written,Written" bitfld.long 0x18 20. " NEWDAT[20] ,New data bits for Message Object 21" "Not written,Written" textline " " bitfld.long 0x18 19. " NEWDAT[19] ,New data bits for Message Object 20" "Not written,Written" bitfld.long 0x18 18. " NEWDAT[18] ,New data bits for Message Object 19" "Not written,Written" bitfld.long 0x18 17. " NEWDAT[17] ,New data bits for Message Object 18" "Not written,Written" textline " " bitfld.long 0x18 16. " NEWDAT[16] ,New data bits for Message Object 17" "Not written,Written" bitfld.long 0x18 15. " NEWDAT[15] ,New data bits for Message Object 16" "Not written,Written" bitfld.long 0x18 14. " NEWDAT[14] ,New data bits for Message Object 15" "Not written,Written" textline " " bitfld.long 0x18 13. " NEWDAT[13] ,New data bits for Message Object 14" "Not written,Written" bitfld.long 0x18 12. " NEWDAT[12] ,New data bits for Message Object 13" "Not written,Written" bitfld.long 0x18 11. " NEWDAT[11] ,New data bits for Message Object 12" "Not written,Written" textline " " bitfld.long 0x18 10. " NEWDAT[10] ,New data bits for Message Object 11" "Not written,Written" bitfld.long 0x18 9. " NEWDAT[9] ,New data bits for Message Object 10" "Not written,Written" bitfld.long 0x18 8. " NEWDAT[8] ,New data bits for Message Object 9" "Not written,Written" textline " " bitfld.long 0x18 7. " NEWDAT[7] ,New data bits for Message Object 8" "Not written,Written" bitfld.long 0x18 6. " NEWDAT[6] ,New data bits for Message Object 7" "Not written,Written" bitfld.long 0x18 5. " NEWDAT[5] ,New data bits for Message Object 6" "Not written,Written" textline " " bitfld.long 0x18 4. " NEWDAT[4] ,New data bits for Message Object 5" "Not written,Written" bitfld.long 0x18 3. " NEWDAT[3] ,New data bits for Message Object 4" "Not written,Written" bitfld.long 0x18 2. " NEWDAT[2] ,New data bits for Message Object 3" "Not written,Written" textline " " bitfld.long 0x18 1. " NEWDAT[1] ,New data bits for Message Object 2" "Not written,Written" bitfld.long 0x18 0. " NEWDAT[0] ,New data bits for Message Object 1" "Not written,Written" line.long 0x1C "MONDB,New Data B Register" bitfld.long 0x1C 31. " NEWDAT[31] ,New data bits for Message Object 64" "Not written,Written" bitfld.long 0x1C 30. " NEWDAT[30] ,New data bits for Message Object 63" "Not written,Written" bitfld.long 0x1C 29. " NEWDAT[29] ,New data bits for Message Object 62" "Not written,Written" textline " " bitfld.long 0x1C 28. " NEWDAT[28] ,New data bits for Message Object 61" "Not written,Written" bitfld.long 0x1C 27. " NEWDAT[27] ,New data bits for Message Object 60" "Not written,Written" bitfld.long 0x1C 26. " NEWDAT[26] ,New data bits for Message Object 59" "Not written,Written" textline " " bitfld.long 0x1C 25. " NEWDAT[25] ,New data bits for Message Object 58" "Not written,Written" bitfld.long 0x1C 24. " NEWDAT[24] ,New data bits for Message Object 57" "Not written,Written" bitfld.long 0x1C 23. " NEWDAT[23] ,New data bits for Message Object 56" "Not written,Written" textline " " bitfld.long 0x1C 22. " NEWDAT[22] ,New data bits for Message Object 55" "Not written,Written" bitfld.long 0x1C 21. " NEWDAT[21] ,New data bits for Message Object 54" "Not written,Written" bitfld.long 0x1C 20. " NEWDAT[20] ,New data bits for Message Object 53" "Not written,Written" textline " " bitfld.long 0x1C 19. " NEWDAT[19] ,New data bits for Message Object 52" "Not written,Written" bitfld.long 0x1C 18. " NEWDAT[18] ,New data bits for Message Object 51" "Not written,Written" bitfld.long 0x1C 17. " NEWDAT[17] ,New data bits for Message Object 50" "Not written,Written" textline " " bitfld.long 0x1C 16. " NEWDAT[16] ,New data bits for Message Object 49" "Not written,Written" bitfld.long 0x1C 15. " NEWDAT[15] ,New data bits for Message Object 48" "Not written,Written" bitfld.long 0x1C 14. " NEWDAT[14] ,New data bits for Message Object 47" "Not written,Written" textline " " bitfld.long 0x1C 13. " NEWDAT[13] ,New data bits for Message Object 46" "Not written,Written" bitfld.long 0x1C 12. " NEWDAT[12] ,New data bits for Message Object 45" "Not written,Written" bitfld.long 0x1C 11. " NEWDAT[11] ,New data bits for Message Object 44" "Not written,Written" textline " " bitfld.long 0x1C 10. " NEWDAT[10] ,New data bits for Message Object 43" "Not written,Written" bitfld.long 0x1C 9. " NEWDAT[9] ,New data bits for Message Object 42" "Not written,Written" bitfld.long 0x1C 8. " NEWDAT[8] ,New data bits for Message Object 41" "Not written,Written" textline " " bitfld.long 0x1C 7. " NEWDAT[7] ,New data bits for Message Object 40" "Not written,Written" bitfld.long 0x1C 6. " NEWDAT[6] ,New data bits for Message Object 39" "Not written,Written" bitfld.long 0x1C 5. " NEWDAT[5] ,New data bits for Message Object 38" "Not written,Written" textline " " bitfld.long 0x1C 4. " NEWDAT[4] ,New data bits for Message Object 37" "Not written,Written" bitfld.long 0x1C 3. " NEWDAT[3] ,New data bits for Message Object 36" "Not written,Written" bitfld.long 0x1C 2. " NEWDAT[2] ,New data bits for Message Object 35" "Not written,Written" textline " " bitfld.long 0x1C 1. " NEWDAT[1] ,New data bits for Message Object 34" "Not written,Written" bitfld.long 0x1C 0. " NEWDAT[0] ,New data bits for Message Object 33" "Not written,Written" line.long 0x20 "MONDC,New Data C Register" bitfld.long 0x20 31. " NEWDAT[31] ,New data bits for Message Object 96" "Not written,Written" bitfld.long 0x20 30. " NEWDAT[30] ,New data bits for Message Object 95" "Not written,Written" bitfld.long 0x20 29. " NEWDAT[29] ,New data bits for Message Object 94" "Not written,Written" textline " " bitfld.long 0x20 28. " NEWDAT[28] ,New data bits for Message Object 93" "Not written,Written" bitfld.long 0x20 27. " NEWDAT[27] ,New data bits for Message Object 92" "Not written,Written" bitfld.long 0x20 26. " NEWDAT[26] ,New data bits for Message Object 91" "Not written,Written" textline " " bitfld.long 0x20 25. " NEWDAT[25] ,New data bits for Message Object 90" "Not written,Written" bitfld.long 0x20 24. " NEWDAT[24] ,New data bits for Message Object 89" "Not written,Written" bitfld.long 0x20 23. " NEWDAT[23] ,New data bits for Message Object 88" "Not written,Written" textline " " bitfld.long 0x20 22. " NEWDAT[22] ,New data bits for Message Object 87" "Not written,Written" bitfld.long 0x20 21. " NEWDAT[21] ,New data bits for Message Object 86" "Not written,Written" bitfld.long 0x20 20. " NEWDAT[20] ,New data bits for Message Object 85" "Not written,Written" textline " " bitfld.long 0x20 19. " NEWDAT[19] ,New data bits for Message Object 84" "Not written,Written" bitfld.long 0x20 18. " NEWDAT[18] ,New data bits for Message Object 83" "Not written,Written" bitfld.long 0x20 17. " NEWDAT[17] ,New data bits for Message Object 82" "Not written,Written" textline " " bitfld.long 0x20 16. " NEWDAT[16] ,New data bits for Message Object 81" "Not written,Written" bitfld.long 0x20 15. " NEWDAT[15] ,New data bits for Message Object 80" "Not written,Written" bitfld.long 0x20 14. " NEWDAT[14] ,New data bits for Message Object 79" "Not written,Written" textline " " bitfld.long 0x20 13. " NEWDAT[13] ,New data bits for Message Object 78" "Not written,Written" bitfld.long 0x20 12. " NEWDAT[12] ,New data bits for Message Object 77" "Not written,Written" bitfld.long 0x20 11. " NEWDAT[11] ,New data bits for Message Object 76" "Not written,Written" textline " " bitfld.long 0x20 10. " NEWDAT[10] ,New data bits for Message Object 75" "Not written,Written" bitfld.long 0x20 9. " NEWDAT[9] ,New data bits for Message Object 74" "Not written,Written" bitfld.long 0x20 8. " NEWDAT[8] ,New data bits for Message Object 73" "Not written,Written" textline " " bitfld.long 0x20 7. " NEWDAT[7] ,New data bits for Message Object 72" "Not written,Written" bitfld.long 0x20 6. " NEWDAT[6] ,New data bits for Message Object 71" "Not written,Written" bitfld.long 0x20 5. " NEWDAT[5] ,New data bits for Message Object 70" "Not written,Written" textline " " bitfld.long 0x20 4. " NEWDAT[4] ,New data bits for Message Object 69" "Not written,Written" bitfld.long 0x20 3. " NEWDAT[3] ,New data bits for Message Object 68" "Not written,Written" bitfld.long 0x20 2. " NEWDAT[2] ,New data bits for Message Object 67" "Not written,Written" textline " " bitfld.long 0x20 1. " NEWDAT[1] ,New data bits for Message Object 66" "Not written,Written" bitfld.long 0x20 0. " NEWDAT[0] ,New data bits for Message Object 65" "Not written,Written" line.long 0x24 "MONDD,New Data D Register" bitfld.long 0x24 31. " NEWDAT[31] ,New data bits for Message Object 128" "Not written,Written" bitfld.long 0x24 30. " NEWDAT[30] ,New data bits for Message Object 127" "Not written,Written" bitfld.long 0x24 29. " NEWDAT[29] ,New data bits for Message Object 126" "Not written,Written" textline " " bitfld.long 0x24 28. " NEWDAT[28] ,New data bits for Message Object 125" "Not written,Written" bitfld.long 0x24 27. " NEWDAT[27] ,New data bits for Message Object 124" "Not written,Written" bitfld.long 0x24 26. " NEWDAT[26] ,New data bits for Message Object 123" "Not written,Written" textline " " bitfld.long 0x24 25. " NEWDAT[25] ,New data bits for Message Object 122" "Not written,Written" bitfld.long 0x24 24. " NEWDAT[24] ,New data bits for Message Object 121" "Not written,Written" bitfld.long 0x24 23. " NEWDAT[23] ,New data bits for Message Object 120" "Not written,Written" textline " " bitfld.long 0x24 22. " NEWDAT[22] ,New data bits for Message Object 119" "Not written,Written" bitfld.long 0x24 21. " NEWDAT[21] ,New data bits for Message Object 118" "Not written,Written" bitfld.long 0x24 20. " NEWDAT[20] ,New data bits for Message Object 117" "Not written,Written" textline " " bitfld.long 0x24 19. " NEWDAT[19] ,New data bits for Message Object 116" "Not written,Written" bitfld.long 0x24 18. " NEWDAT[18] ,New data bits for Message Object 115" "Not written,Written" bitfld.long 0x24 17. " NEWDAT[17] ,New data bits for Message Object 114" "Not written,Written" textline " " bitfld.long 0x24 16. " NEWDAT[16] ,New data bits for Message Object 113" "Not written,Written" bitfld.long 0x24 15. " NEWDAT[15] ,New data bits for Message Object 112" "Not written,Written" bitfld.long 0x24 14. " NEWDAT[14] ,New data bits for Message Object 111" "Not written,Written" textline " " bitfld.long 0x24 13. " NEWDAT[13] ,New data bits for Message Object 110" "Not written,Written" bitfld.long 0x24 12. " NEWDAT[12] ,New data bits for Message Object 109" "Not written,Written" bitfld.long 0x24 11. " NEWDAT[11] ,New data bits for Message Object 108" "Not written,Written" textline " " bitfld.long 0x24 10. " NEWDAT[10] ,New data bits for Message Object 107" "Not written,Written" bitfld.long 0x24 9. " NEWDAT[9] ,New data bits for Message Object 106" "Not written,Written" bitfld.long 0x24 8. " NEWDAT[8] ,New data bits for Message Object 105" "Not written,Written" textline " " bitfld.long 0x24 7. " NEWDAT[7] ,New data bits for Message Object 104" "Not written,Written" bitfld.long 0x24 6. " NEWDAT[6] ,New data bits for Message Object 103" "Not written,Written" bitfld.long 0x24 5. " NEWDAT[5] ,New data bits for Message Object 102" "Not written,Written" textline " " bitfld.long 0x24 4. " NEWDAT[4] ,New data bits for Message Object 101" "Not written,Written" bitfld.long 0x24 3. " NEWDAT[3] ,New data bits for Message Object 100" "Not written,Written" bitfld.long 0x24 2. " NEWDAT[2] ,New data bits for Message Object 99" "Not written,Written" textline " " bitfld.long 0x24 1. " NEWDAT[1] ,New data bits for Message Object 99" "Not written,Written" bitfld.long 0x24 0. " NEWDAT[0] ,New data bits for Message Object 98" "Not written,Written" line.long 0x28 "MOIPX,Interrupt Pending X Register" bitfld.long 0x28 15. " INTPNDD[3] ,MOIPD Interrupt Pending 3" "Not source,Source" bitfld.long 0x28 14. " INTPNDD[2] ,MOIPD Interrupt Pending 2" "Not source,Source" bitfld.long 0x28 13. " INTPNDD[1] ,MOIPD Interrupt Pending 1" "Not source,Source" textline " " bitfld.long 0x28 12. " INTPNDD[0] ,MOIPD Interrupt Pending 0" "Not source,Source" bitfld.long 0x28 11. " INTPNDC[3] ,MOIPC Interrupt Pending 3" "Not source,Source" bitfld.long 0x28 10. " INTPNDC[2] ,MOIPC Interrupt Pending 2" "Not source,Source" textline " " bitfld.long 0x28 9. " INTPNDC[1] ,MOIPC Interrupt Pending 1" "Not source,Source" bitfld.long 0x28 8. " INTPNDC[0] ,MOIPC Interrupt Pending 0" "Not source,Source" bitfld.long 0x28 7. " INTPNDB[3] ,MOIPB Interrupt Pending 3" "Not source,Source" textline " " bitfld.long 0x28 6. " INTPNDB[2] ,MOIPB Interrupt Pending 2" "Not source,Source" bitfld.long 0x28 5. " INTPNDB[1] ,MOIPB Interrupt Pending 1" "Not source,Source" bitfld.long 0x28 4. " INTPNDB[0] ,MOIPB Interrupt Pending 0" "Not source,Source" textline " " bitfld.long 0x28 3. " INTPNDA[3] ,MOIPA Interrupt Pending 3" "Not source,Source" bitfld.long 0x28 2. " INTPNDA[2] ,MOIPA Interrupt Pending 2" "Not source,Source" bitfld.long 0x28 1. " INTPNDA[1] ,MOIPA Interrupt Pending 1" "Not source,Source" textline " " bitfld.long 0x28 0. " INTPNDA[0] ,MOIPA Interrupt Pending 0" "Not source,Source" line.long 0x2C "MOIPA,Interrupt Pending A Register" bitfld.long 0x2C 31. " INTPND[31] ,Interrupt pending bit 32 for Message Object" "Not source,Source" bitfld.long 0x2C 30. " INTPND[30] ,Interrupt pending bit 31 for Message Object" "Not source,Source" bitfld.long 0x2C 29. " INTPND[29] ,Interrupt pending bit 30 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 28. " INTPND[28] ,Interrupt pending bit 29 for Message Object" "Not source,Source" bitfld.long 0x2C 27. " INTPND[27] ,Interrupt pending bit 28 for Message Object" "Not source,Source" bitfld.long 0x2C 26. " INTPND[26] ,Interrupt pending bit 27 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 25. " INTPND[25] ,Interrupt pending bit 26 for Message Object" "Not source,Source" bitfld.long 0x2C 24. " INTPND[24] ,Interrupt pending bit 25 for Message Object" "Not source,Source" bitfld.long 0x2C 23. " INTPND[23] ,Interrupt pending bit 24 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 22. " INTPND[22] ,Interrupt pending bit 23 for Message Object" "Not source,Source" bitfld.long 0x2C 21. " INTPND[21] ,Interrupt pending bit 22 for Message Object" "Not source,Source" bitfld.long 0x2C 20. " INTPND[20] ,Interrupt pending bit 21 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 19. " INTPND[19] ,Interrupt pending bit 20 for Message Object" "Not source,Source" bitfld.long 0x2C 18. " INTPND[18] ,Interrupt pending bit 19 for Message Object" "Not source,Source" bitfld.long 0x2C 17. " INTPND[17] ,Interrupt pending bit 18 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 16. " INTPND[16] ,Interrupt pending bit 17 for Message Object" "Not source,Source" bitfld.long 0x2C 15. " INTPND[15] ,Interrupt pending bit 16 for Message Object" "Not source,Source" bitfld.long 0x2C 14. " INTPND[14] ,Interrupt pending bit 15 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 13. " INTPND[13] ,Interrupt pending bit 14 for Message Object" "Not source,Source" bitfld.long 0x2C 12. " INTPND[12] ,Interrupt pending bit 13 for Message Object" "Not source,Source" bitfld.long 0x2C 11. " INTPND[11] ,Interrupt pending bit 12 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 10. " INTPND[10] ,Interrupt pending bit 11 for Message Object" "Not source,Source" bitfld.long 0x2C 9. " INTPND[9] ,Interrupt pending bit 10 for Message Object" "Not source,Source" bitfld.long 0x2C 8. " INTPND[8] ,Interrupt pending bit 9 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 7. " INTPND[7] ,Interrupt pending bit 8 for Message Object" "Not source,Source" bitfld.long 0x2C 6. " INTPND[6] ,Interrupt pending bit 7 for Message Object" "Not source,Source" bitfld.long 0x2C 5. " INTPND[5] ,Interrupt pending bit 6 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 4. " INTPND[4] ,Interrupt pending bit 5 for Message Object" "Not source,Source" bitfld.long 0x2C 3. " INTPND[3] ,Interrupt pending bit 4 for Message Object" "Not source,Source" bitfld.long 0x2C 2. " INTPND[2] ,Interrupt pending bit 3 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 1. " INTPND[1] ,Interrupt pending bit 2 for Message Object" "Not source,Source" bitfld.long 0x2C 0. " INTPND[0] ,Interrupt pending bit 1 for Message Object" "Not source,Source" line.long 0x30 "MOIPB,Interrupt Pending B Register" bitfld.long 0x30 31. " INTPND[31] ,Interrupt pending bit 64 for Message Object" "Not source,Source" bitfld.long 0x30 30. " INTPND[30] ,Interrupt pending bit 63 for Message Object" "Not source,Source" bitfld.long 0x30 29. " INTPND[29] ,Interrupt pending bit 62 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 28. " INTPND[28] ,Interrupt pending bit 61 for Message Object" "Not source,Source" bitfld.long 0x30 27. " INTPND[27] ,Interrupt pending bit 60 for Message Object" "Not source,Source" bitfld.long 0x30 26. " INTPND[26] ,Interrupt pending bit 59 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 25. " INTPND[25] ,Interrupt pending bit 58 for Message Object" "Not source,Source" bitfld.long 0x30 24. " INTPND[24] ,Interrupt pending bit 57 for Message Object" "Not source,Source" bitfld.long 0x30 23. " INTPND[23] ,Interrupt pending bit 56 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 22. " INTPND[22] ,Interrupt pending bit 55 for Message Object" "Not source,Source" bitfld.long 0x30 21. " INTPND[21] ,Interrupt pending bit 54 for Message Object" "Not source,Source" bitfld.long 0x30 20. " INTPND[20] ,Interrupt pending bit 53 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 19. " INTPND[19] ,Interrupt pending bit 52 for Message Object" "Not source,Source" bitfld.long 0x30 18. " INTPND[18] ,Interrupt pending bit 51 for Message Object" "Not source,Source" bitfld.long 0x30 17. " INTPND[17] ,Interrupt pending bit 50 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 16. " INTPND[16] ,Interrupt pending bit 49 for Message Object" "Not source,Source" bitfld.long 0x30 15. " INTPND[15] ,Interrupt pending bit 48 for Message Object" "Not source,Source" bitfld.long 0x30 14. " INTPND[14] ,Interrupt pending bit 47 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 13. " INTPND[13] ,Interrupt pending bit 46 for Message Object" "Not source,Source" bitfld.long 0x30 12. " INTPND[12] ,Interrupt pending bit 45 for Message Object" "Not source,Source" bitfld.long 0x30 11. " INTPND[11] ,Interrupt pending bit 44 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 10. " INTPND[10] ,Interrupt pending bit 43 for Message Object" "Not source,Source" bitfld.long 0x30 9. " INTPND[9] ,Interrupt pending bit 42 for Message Object" "Not source,Source" bitfld.long 0x30 8. " INTPND[8] ,Interrupt pending bit 41 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 7. " INTPND[7] ,Interrupt pending bit 40 for Message Object" "Not source,Source" bitfld.long 0x30 6. " INTPND[6] ,Interrupt pending bit 39 for Message Object" "Not source,Source" bitfld.long 0x30 5. " INTPND[5] ,Interrupt pending bit 38 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 4. " INTPND[4] ,Interrupt pending bit 37 for Message Object" "Not source,Source" bitfld.long 0x30 3. " INTPND[3] ,Interrupt pending bit 36 for Message Object" "Not source,Source" bitfld.long 0x30 2. " INTPND[2] ,Interrupt pending bit 35 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 1. " INTPND[1] ,Interrupt pending bit 34 for Message Object" "Not source,Source" bitfld.long 0x30 0. " INTPND[0] ,Interrupt pending bit 33 for Message Object" "Not source,Source" line.long 0x34 "MOIPC,Interrupt Pending C Register" bitfld.long 0x34 31. " INTPND[31] ,Interrupt pending bit 96 for Message Object" "Not source,Source" bitfld.long 0x34 30. " INTPND[30] ,Interrupt pending bit 95 for Message Object" "Not source,Source" bitfld.long 0x34 29. " INTPND[29] ,Interrupt pending bit 94 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 28. " INTPND[28] ,Interrupt pending bit 93 for Message Object" "Not source,Source" bitfld.long 0x34 27. " INTPND[27] ,Interrupt pending bit 92 for Message Object" "Not source,Source" bitfld.long 0x34 26. " INTPND[26] ,Interrupt pending bit 91 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 25. " INTPND[25] ,Interrupt pending bit 90 for Message Object" "Not source,Source" bitfld.long 0x34 24. " INTPND[24] ,Interrupt pending bit 89 for Message Object" "Not source,Source" bitfld.long 0x34 23. " INTPND[23] ,Interrupt pending bit 88 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 22. " INTPND[22] ,Interrupt pending bit 87 for Message Object" "Not source,Source" bitfld.long 0x34 21. " INTPND[21] ,Interrupt pending bit 86 for Message Object" "Not source,Source" bitfld.long 0x34 20. " INTPND[20] ,Interrupt pending bit 85 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 19. " INTPND[19] ,Interrupt pending bit 84 for Message Object" "Not source,Source" bitfld.long 0x34 18. " INTPND[18] ,Interrupt pending bit 83 for Message Object" "Not source,Source" bitfld.long 0x34 17. " INTPND[17] ,Interrupt pending bit 82 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 16. " INTPND[16] ,Interrupt pending bit 81 for Message Object" "Not source,Source" bitfld.long 0x34 15. " INTPND[15] ,Interrupt pending bit 80 for Message Object" "Not source,Source" bitfld.long 0x34 14. " INTPND[14] ,Interrupt pending bit 79 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 13. " INTPND[13] ,Interrupt pending bit 78 for Message Object" "Not source,Source" bitfld.long 0x34 12. " INTPND[12] ,Interrupt pending bit 77 for Message Object" "Not source,Source" bitfld.long 0x34 11. " INTPND[11] ,Interrupt pending bit 76 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 10. " INTPND[10] ,Interrupt pending bit 75 for Message Object" "Not source,Source" bitfld.long 0x34 9. " INTPND[9] ,Interrupt pending bit 74 for Message Object" "Not source,Source" bitfld.long 0x34 8. " INTPND[8] ,Interrupt pending bit 73 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 7. " INTPND[7] ,Interrupt pending bit 72 for Message Object" "Not source,Source" bitfld.long 0x34 6. " INTPND[6] ,Interrupt pending bit 71 for Message Object" "Not source,Source" bitfld.long 0x34 5. " INTPND[5] ,Interrupt pending bit 70 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 4. " INTPND[4] ,Interrupt pending bit 69 for Message Object" "Not source,Source" bitfld.long 0x34 3. " INTPND[3] ,Interrupt pending bit 68 for Message Object" "Not source,Source" bitfld.long 0x34 2. " INTPND[2] ,Interrupt pending bit 67 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 1. " INTPND[1] ,Interrupt pending bit 66 for Message Object" "Not source,Source" bitfld.long 0x34 0. " INTPND[0] ,Interrupt pending bit 65 for Message Object" "Not source,Source" line.long 0x38 "MOIPD,Interrupt Pending D Register" bitfld.long 0x38 31. " INTPND[31] ,Interrupt pending bit 128 for Message Object" "Not source,Source" bitfld.long 0x38 30. " INTPND[30] ,Interrupt pending bit 127 for Message Object" "Not source,Source" bitfld.long 0x38 29. " INTPND[29] ,Interrupt pending bit 126 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 28. " INTPND[28] ,Interrupt pending bit 125 for Message Object" "Not source,Source" bitfld.long 0x38 27. " INTPND[27] ,Interrupt pending bit 124 for Message Object" "Not source,Source" bitfld.long 0x38 26. " INTPND[26] ,Interrupt pending bit 123 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 25. " INTPND[25] ,Interrupt pending bit 122 for Message Object" "Not source,Source" bitfld.long 0x38 24. " INTPND[24] ,Interrupt pending bit 121 for Message Object" "Not source,Source" bitfld.long 0x38 23. " INTPND[23] ,Interrupt pending bit 120 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 22. " INTPND[22] ,Interrupt pending bit 119 for Message Object" "Not source,Source" bitfld.long 0x38 21. " INTPND[21] ,Interrupt pending bit 118 for Message Object" "Not source,Source" bitfld.long 0x38 20. " INTPND[20] ,Interrupt pending bit 117 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 19. " INTPND[19] ,Interrupt pending bit 116 for Message Object" "Not source,Source" bitfld.long 0x38 18. " INTPND[18] ,Interrupt pending bit 115 for Message Object" "Not source,Source" bitfld.long 0x38 17. " INTPND[17] ,Interrupt pending bit 114 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 16. " INTPND[16] ,Interrupt pending bit 113 for Message Object" "Not source,Source" bitfld.long 0x38 15. " INTPND[15] ,Interrupt pending bit 112 for Message Object" "Not source,Source" bitfld.long 0x38 14. " INTPND[14] ,Interrupt pending bit 111 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 13. " INTPND[13] ,Interrupt pending bit 110 for Message Object" "Not source,Source" bitfld.long 0x38 12. " INTPND[12] ,Interrupt pending bit 109 for Message Object" "Not source,Source" bitfld.long 0x38 11. " INTPND[11] ,Interrupt pending bit 108 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 10. " INTPND[10] ,Interrupt pending bit 107 for Message Object" "Not source,Source" bitfld.long 0x38 9. " INTPND[9] ,Interrupt pending bit 106 for Message Object" "Not source,Source" bitfld.long 0x38 8. " INTPND[8] ,Interrupt pending bit 105 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 7. " INTPND[7] ,Interrupt pending bit 104 for Message Object" "Not source,Source" bitfld.long 0x38 6. " INTPND[6] ,Interrupt pending bit 103 for Message Object" "Not source,Source" bitfld.long 0x38 5. " INTPND[5] ,Interrupt pending bit 102 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 4. " INTPND[4] ,Interrupt pending bit 101 for Message Object" "Not source,Source" bitfld.long 0x38 3. " INTPND[3] ,Interrupt pending bit 100 for Message Object" "Not source,Source" bitfld.long 0x38 2. " INTPND[2] ,Interrupt pending bit 99 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 1. " INTPND[1] ,Interrupt pending bit 98 for Message Object" "Not source,Source" bitfld.long 0x38 0. " INTPND[0] ,Interrupt pending bit 97 for Message Object" "Not source,Source" line.long 0x3C "MOVALX,Message Valid X Register" bitfld.long 0x3C 15. " MSGVALD[3] ,MOVALD Message Valid 3" "Not considered,Considered" bitfld.long 0x3C 14. " MSGVALD[2] ,MOVALD Message Valid 2" "Not considered,Considered" bitfld.long 0x3C 13. " MSGVALD[1] ,MOVALD Message Valid 1" "Not considered,Considered" textline " " bitfld.long 0x3C 12. " MSGVALD[0] ,MOVALD Message Valid 0" "Not considered,Considered" bitfld.long 0x3C 11. " MSGVALC[3] ,MOVALC Message Valid 3" "Not considered,Considered" bitfld.long 0x3C 10. " MSGVALC[2] ,MOVALC Message Valid 2" "Not considered,Considered" textline " " bitfld.long 0x3C 9. " MSGVALC[1] ,MOVALC Message Valid 1" "Not considered,Considered" bitfld.long 0x3C 8. " MSGVALC[0] ,MOVALC Message Valid 0" "Not considered,Considered" bitfld.long 0x3C 7. " MSGVALB[3] ,MOVALB Message Valid 3" "Not considered,Considered" textline " " bitfld.long 0x3C 6. " MSGVALB[2] ,MOVALB Message Valid 2" "Not considered,Considered" bitfld.long 0x3C 5. " MSGVALB[1] ,MOVALB Message Valid 1" "Not considered,Considered" bitfld.long 0x3C 4. " MSGVALB[0] ,MOVALB Message Valid 0" "Not considered,Considered" textline " " bitfld.long 0x3C 3. " MSGVALA[3] ,MOVALA Message Valid 3" "Not considered,Considered" bitfld.long 0x3C 2. " MSGVALA[2] ,MOVALA Message Valid 2" "Not considered,Considered" bitfld.long 0x3C 1. " MSGVALA[1] ,MOVALA Message Valid 1" "Not considered,Considered" textline " " bitfld.long 0x3C 0. " MSGVALA[0] ,MOVALA Message Valid 0" "Not considered,Considered" line.long 0x40 "MOVALA,Message Valid A Register" bitfld.long 0x40 31. " MSGVAL[31] ,Message valid bit for Message Object 32" "Not considered,Considered" bitfld.long 0x40 30. " MSGVAL[30] ,Message valid bit for Message Object 31" "Not considered,Considered" bitfld.long 0x40 29. " MSGVAL[29] ,Message valid bit for Message Object 30" "Not considered,Considered" textline " " bitfld.long 0x40 28. " MSGVAL[28] ,Message valid bit for Message Object 29" "Not considered,Considered" bitfld.long 0x40 27. " MSGVAL[27] ,Message valid bit for Message Object 28" "Not considered,Considered" bitfld.long 0x40 26. " MSGVAL[26] ,Message valid bit for Message Object 27" "Not considered,Considered" textline " " bitfld.long 0x40 25. " MSGVAL[25] ,Message valid bit for Message Object 26" "Not considered,Considered" bitfld.long 0x40 24. " MSGVAL[24] ,Message valid bit for Message Object 25" "Not considered,Considered" bitfld.long 0x40 23. " MSGVAL[23] ,Message valid bit for Message Object 24" "Not considered,Considered" textline " " bitfld.long 0x40 22. " MSGVAL[22] ,Message valid bit for Message Object 23" "Not considered,Considered" bitfld.long 0x40 21. " MSGVAL[21] ,Message valid bit for Message Object 22" "Not considered,Considered" bitfld.long 0x40 20. " MSGVAL[20] ,Message valid bit for Message Object 21" "Not considered,Considered" textline " " bitfld.long 0x40 19. " MSGVAL[19] ,Message valid bit for Message Object 20" "Not considered,Considered" bitfld.long 0x40 18. " MSGVAL[18] ,Message valid bit for Message Object 19" "Not considered,Considered" bitfld.long 0x40 17. " MSGVAL[17] ,Message valid bit for Message Object 18" "Not considered,Considered" textline " " bitfld.long 0x40 16. " MSGVAL[16] ,Message valid bit for Message Object 17" "Not considered,Considered" bitfld.long 0x40 15. " MSGVAL[15] ,Message valid bit for Message Object 16" "Not considered,Considered" bitfld.long 0x40 14. " MSGVAL[14] ,Message valid bit for Message Object 15" "Not considered,Considered" textline " " bitfld.long 0x40 13. " MSGVAL[13] ,Message valid bit for Message Object 14" "Not considered,Considered" bitfld.long 0x40 12. " MSGVAL[12] ,Message valid bit for Message Object 13" "Not considered,Considered" bitfld.long 0x40 11. " MSGVAL[11] ,Message valid bit for Message Object 12" "Not considered,Considered" textline " " bitfld.long 0x40 10. " MSGVAL[10] ,Message valid bit for Message Object 11" "Not considered,Considered" bitfld.long 0x40 9. " MSGVAL[9] ,Message valid bit for Message Object 10" "Not considered,Considered" bitfld.long 0x40 8. " MSGVAL[8] ,Message valid bit for Message Object 9" "Not considered,Considered" textline " " bitfld.long 0x40 7. " MSGVAL[7] ,Message valid bit for Message Object 8" "Not considered,Considered" bitfld.long 0x40 6. " MSGVAL[6] ,Message valid bit for Message Object 7" "Not considered,Considered" bitfld.long 0x40 5. " MSGVAL[5] ,Message valid bit for Message Object 6" "Not considered,Considered" textline " " bitfld.long 0x40 4. " MSGVAL[4] ,Message valid bit for Message Object 5" "Not considered,Considered" bitfld.long 0x40 3. " MSGVAL[3] ,Message valid bit for Message Object 4" "Not considered,Considered" bitfld.long 0x40 2. " MSGVAL[2] ,Message valid bit for Message Object 3" "Not considered,Considered" textline " " bitfld.long 0x40 1. " MSGVAL[1] ,Message valid bit for Message Object 2" "Not considered,Considered" bitfld.long 0x40 0. " MSGVAL[0] ,Message valid bit for Message Object 1" "Not considered,Considered" line.long 0x44 "MOVALB,Message Valid B Register" bitfld.long 0x44 31. " MSGVAL[31] ,Message valid bit for Message Object 64" "Not considered,Considered" bitfld.long 0x44 30. " MSGVAL[30] ,Message valid bit for Message Object 63" "Not considered,Considered" bitfld.long 0x44 29. " MSGVAL[29] ,Message valid bit for Message Object 62" "Not considered,Considered" textline " " bitfld.long 0x44 28. " MSGVAL[28] ,Message valid bit for Message Object 61" "Not considered,Considered" bitfld.long 0x44 27. " MSGVAL[27] ,Message valid bit for Message Object 60" "Not considered,Considered" bitfld.long 0x44 26. " MSGVAL[26] ,Message valid bit for Message Object 59" "Not considered,Considered" textline " " bitfld.long 0x44 25. " MSGVAL[25] ,Message valid bit for Message Object 58" "Not considered,Considered" bitfld.long 0x44 24. " MSGVAL[24] ,Message valid bit for Message Object 57" "Not considered,Considered" bitfld.long 0x44 23. " MSGVAL[23] ,Message valid bit for Message Object 56" "Not considered,Considered" textline " " bitfld.long 0x44 22. " MSGVAL[22] ,Message valid bit for Message Object 55" "Not considered,Considered" bitfld.long 0x44 21. " MSGVAL[21] ,Message valid bit for Message Object 54" "Not considered,Considered" bitfld.long 0x44 20. " MSGVAL[20] ,Message valid bit for Message Object 53" "Not considered,Considered" textline " " bitfld.long 0x44 19. " MSGVAL[19] ,Message valid bit for Message Object 52" "Not considered,Considered" bitfld.long 0x44 18. " MSGVAL[18] ,Message valid bit for Message Object 51" "Not considered,Considered" bitfld.long 0x44 17. " MSGVAL[17] ,Message valid bit for Message Object 50" "Not considered,Considered" textline " " bitfld.long 0x44 16. " MSGVAL[16] ,Message valid bit for Message Object 49" "Not considered,Considered" bitfld.long 0x44 15. " MSGVAL[15] ,Message valid bit for Message Object 48" "Not considered,Considered" bitfld.long 0x44 14. " MSGVAL[14] ,Message valid bit for Message Object 47" "Not considered,Considered" textline " " bitfld.long 0x44 13. " MSGVAL[13] ,Message valid bit for Message Object 46" "Not considered,Considered" bitfld.long 0x44 12. " MSGVAL[12] ,Message valid bit for Message Object 45" "Not considered,Considered" bitfld.long 0x44 11. " MSGVAL[11] ,Message valid bit for Message Object 44" "Not considered,Considered" textline " " bitfld.long 0x44 10. " MSGVAL[10] ,Message valid bit for Message Object 43" "Not considered,Considered" bitfld.long 0x44 9. " MSGVAL[9] ,Message valid bit for Message Object 42" "Not considered,Considered" bitfld.long 0x44 8. " MSGVAL[8] ,Message valid bit for Message Object 41" "Not considered,Considered" textline " " bitfld.long 0x44 7. " MSGVAL[7] ,Message valid bit for Message Object 40" "Not considered,Considered" bitfld.long 0x44 6. " MSGVAL[6] ,Message valid bit for Message Object 39" "Not considered,Considered" bitfld.long 0x44 5. " MSGVAL[5] ,Message valid bit for Message Object 38" "Not considered,Considered" textline " " bitfld.long 0x44 4. " MSGVAL[4] ,Message valid bit for Message Object 37" "Not considered,Considered" bitfld.long 0x44 3. " MSGVAL[3] ,Message valid bit for Message Object 36" "Not considered,Considered" bitfld.long 0x44 2. " MSGVAL[2] ,Message valid bit for Message Object 35" "Not considered,Considered" textline " " bitfld.long 0x44 1. " MSGVAL[1] ,Message valid bit for Message Object 34" "Not considered,Considered" bitfld.long 0x44 0. " MSGVAL[0] ,Message valid bit for Message Object 33" "Not considered,Considered" line.long 0x48 "MOVALC,Message Valid C Register" bitfld.long 0x48 31. " MSGVAL[31] ,Message valid bit for Message Object 96" "Not considered,Considered" bitfld.long 0x48 30. " MSGVAL[30] ,Message valid bit for Message Object 95" "Not considered,Considered" bitfld.long 0x48 29. " MSGVAL[29] ,Message valid bit for Message Object 94" "Not considered,Considered" textline " " bitfld.long 0x48 28. " MSGVAL[28] ,Message valid bit for Message Object 93" "Not considered,Considered" bitfld.long 0x48 27. " MSGVAL[27] ,Message valid bit for Message Object 92" "Not considered,Considered" bitfld.long 0x48 26. " MSGVAL[26] ,Message valid bit for Message Object 91" "Not considered,Considered" textline " " bitfld.long 0x48 25. " MSGVAL[25] ,Message valid bit for Message Object 90" "Not considered,Considered" bitfld.long 0x48 24. " MSGVAL[24] ,Message valid bit for Message Object 89" "Not considered,Considered" bitfld.long 0x48 23. " MSGVAL[23] ,Message valid bit for Message Object 88" "Not considered,Considered" textline " " bitfld.long 0x48 22. " MSGVAL[22] ,Message valid bit for Message Object 87" "Not considered,Considered" bitfld.long 0x48 21. " MSGVAL[21] ,Message valid bit for Message Object 86" "Not considered,Considered" bitfld.long 0x48 20. " MSGVAL[20] ,Message valid bit for Message Object 85" "Not considered,Considered" textline " " bitfld.long 0x48 19. " MSGVAL[19] ,Message valid bit for Message Object 84" "Not considered,Considered" bitfld.long 0x48 18. " MSGVAL[18] ,Message valid bit for Message Object 83" "Not considered,Considered" bitfld.long 0x48 17. " MSGVAL[17] ,Message valid bit for Message Object 82" "Not considered,Considered" textline " " bitfld.long 0x48 16. " MSGVAL[16] ,Message valid bit for Message Object 81" "Not considered,Considered" bitfld.long 0x48 15. " MSGVAL[15] ,Message valid bit for Message Object 80" "Not considered,Considered" bitfld.long 0x48 14. " MSGVAL[14] ,Message valid bit for Message Object 79" "Not considered,Considered" textline " " bitfld.long 0x48 13. " MSGVAL[13] ,Message valid bit for Message Object 78" "Not considered,Considered" bitfld.long 0x48 12. " MSGVAL[12] ,Message valid bit for Message Object 77" "Not considered,Considered" bitfld.long 0x48 11. " MSGVAL[11] ,Message valid bit for Message Object 76" "Not considered,Considered" textline " " bitfld.long 0x48 10. " MSGVAL[10] ,Message valid bit for Message Object 75" "Not considered,Considered" bitfld.long 0x48 9. " MSGVAL[9] ,Message valid bit for Message Object 74" "Not considered,Considered" bitfld.long 0x48 8. " MSGVAL[8] ,Message valid bit for Message Object 73" "Not considered,Considered" textline " " bitfld.long 0x48 7. " MSGVAL[7] ,Message valid bit for Message Object 72" "Not considered,Considered" bitfld.long 0x48 6. " MSGVAL[6] ,Message valid bit for Message Object 71" "Not considered,Considered" bitfld.long 0x48 5. " MSGVAL[5] ,Message valid bit for Message Object 70" "Not considered,Considered" textline " " bitfld.long 0x48 4. " MSGVAL[4] ,Message valid bit for Message Object 69" "Not considered,Considered" bitfld.long 0x48 3. " MSGVAL[3] ,Message valid bit for Message Object 68" "Not considered,Considered" bitfld.long 0x48 2. " MSGVAL[2] ,Message valid bit for Message Object 67" "Not considered,Considered" textline " " bitfld.long 0x48 1. " MSGVAL[1] ,Message valid bit for Message Object 66" "Not considered,Considered" bitfld.long 0x48 0. " MSGVAL[0] ,Message valid bit for Message Object 65" "Not considered,Considered" line.long 0x4C "MOVALD,Message Valid D Register" bitfld.long 0x4C 31. " MSGVAL[31] ,Message valid bit for Message Object 128" "Not considered,Considered" bitfld.long 0x4C 30. " MSGVAL[30] ,Message valid bit for Message Object 127" "Not considered,Considered" bitfld.long 0x4C 29. " MSGVAL[29] ,Message valid bit for Message Object 126" "Not considered,Considered" textline " " bitfld.long 0x4C 28. " MSGVAL[28] ,Message valid bit for Message Object 125" "Not considered,Considered" bitfld.long 0x4C 27. " MSGVAL[27] ,Message valid bit for Message Object 124" "Not considered,Considered" bitfld.long 0x4C 26. " MSGVAL[26] ,Message valid bit for Message Object 123" "Not considered,Considered" textline " " bitfld.long 0x4C 25. " MSGVAL[25] ,Message valid bit for Message Object 122" "Not considered,Considered" bitfld.long 0x4C 24. " MSGVAL[24] ,Message valid bit for Message Object 121" "Not considered,Considered" bitfld.long 0x4C 23. " MSGVAL[23] ,Message valid bit for Message Object 120" "Not considered,Considered" textline " " bitfld.long 0x4C 22. " MSGVAL[22] ,Message valid bit for Message Object 119" "Not considered,Considered" bitfld.long 0x4C 21. " MSGVAL[21] ,Message valid bit for Message Object 118" "Not considered,Considered" bitfld.long 0x4C 20. " MSGVAL[20] ,Message valid bit for Message Object 117" "Not considered,Considered" textline " " bitfld.long 0x4C 19. " MSGVAL[19] ,Message valid bit for Message Object 116" "Not considered,Considered" bitfld.long 0x4C 18. " MSGVAL[18] ,Message valid bit for Message Object 115" "Not considered,Considered" bitfld.long 0x4C 17. " MSGVAL[17] ,Message valid bit for Message Object 114" "Not considered,Considered" textline " " bitfld.long 0x4C 16. " MSGVAL[16] ,Message valid bit for Message Object 113" "Not considered,Considered" bitfld.long 0x4C 15. " MSGVAL[15] ,Message valid bit for Message Object 112" "Not considered,Considered" bitfld.long 0x4C 14. " MSGVAL[14] ,Message valid bit for Message Object 111" "Not considered,Considered" textline " " bitfld.long 0x4C 13. " MSGVAL[13] ,Message valid bit for Message Object 110" "Not considered,Considered" bitfld.long 0x4C 12. " MSGVAL[12] ,Message valid bit for Message Object 109" "Not considered,Considered" bitfld.long 0x4C 11. " MSGVAL[11] ,Message valid bit for Message Object 108" "Not considered,Considered" textline " " bitfld.long 0x4C 10. " MSGVAL[10] ,Message valid bit for Message Object 107" "Not considered,Considered" bitfld.long 0x4C 9. " MSGVAL[9] ,Message valid bit for Message Object 106" "Not considered,Considered" bitfld.long 0x4C 8. " MSGVAL[8] ,Message valid bit for Message Object 105" "Not considered,Considered" textline " " bitfld.long 0x4C 7. " MSGVAL[7] ,Message valid bit for Message Object 104" "Not considered,Considered" bitfld.long 0x4C 6. " MSGVAL[6] ,Message valid bit for Message Object 103" "Not considered,Considered" bitfld.long 0x4C 5. " MSGVAL[5] ,Message valid bit for Message Object 102" "Not considered,Considered" textline " " bitfld.long 0x4C 4. " MSGVAL[4] ,Message valid bit for Message Object 101" "Not considered,Considered" bitfld.long 0x4C 3. " MSGVAL[3] ,Message valid bit for Message Object 100" "Not considered,Considered" bitfld.long 0x4C 2. " MSGVAL[2] ,Message valid bit for Message Object 99" "Not considered,Considered" textline " " bitfld.long 0x4C 1. " MSGVAL[1] ,Message valid bit for Message Object 98" "Not considered,Considered" bitfld.long 0x4C 0. " MSGVAL[0] ,Message valid bit for Message Object 97" "Not considered,Considered" tree.end tree "Message Interface Group" hgroup.long 0x100++0x3 hide.long 0x00 "IF1CMR,IF1 Command Register" in group.long (0x100+0x4)++0x13 line.long 0x00 "IF1MSK,IF1 Mask Register" bitfld.long 0x00 31. " MXTD ,Mask Extended Identifier" "Not accepted,Accepted" bitfld.long 0x00 30. " MDIR ,Mask Message Direction" "Not accepted,Accepted" bitfld.long 0x00 28. " MSK28 ,Identifier Mask 28" "Masked,Not masked" textline " " bitfld.long 0x00 27. " MSK27 ,Identifier Mask 27" "Masked,Not masked" bitfld.long 0x00 26. " MSK26 ,Identifier Mask 26" "Masked,Not masked" bitfld.long 0x00 25. " MSK25 ,Identifier Mask 25" "Masked,Not masked" textline " " bitfld.long 0x00 24. " MSK24 ,Identifier Mask 24" "Masked,Not masked" bitfld.long 0x00 23. " MSK23 ,Identifier Mask 23" "Masked,Not masked" bitfld.long 0x00 22. " MSK22 ,Identifier Mask 22" "Masked,Not masked" textline " " bitfld.long 0x00 21. " MSK21 ,Identifier Mask 21" "Masked,Not masked" bitfld.long 0x00 20. " MSK20 ,Identifier Mask 20" "Masked,Not masked" bitfld.long 0x00 19. " MSK19 ,Identifier Mask 19" "Masked,Not masked" textline " " bitfld.long 0x00 18. " MSK18 ,Identifier Mask 18" "Masked,Not masked" bitfld.long 0x00 17. " MSK17 ,Identifier Mask 17" "Masked,Not masked" bitfld.long 0x00 16. " MSK16 ,Identifier Mask 16" "Masked,Not masked" textline " " bitfld.long 0x00 15. " MSK15 ,Identifier Mask 15" "Masked,Not masked" bitfld.long 0x00 14. " MSK14 ,Identifier Mask 14" "Masked,Not masked" bitfld.long 0x00 13. " MSK13 ,Identifier Mask 13" "Masked,Not masked" textline " " bitfld.long 0x00 12. " MSK12 ,Identifier Mask 12" "Masked,Not masked" bitfld.long 0x00 11. " MSK11 ,Identifier Mask 11" "Masked,Not masked" bitfld.long 0x00 10. " MSK10 ,Identifier Mask 10" "Masked,Not masked" textline " " bitfld.long 0x00 9. " MSK9 ,Identifier Mask 9" "Masked,Not masked" bitfld.long 0x00 8. " MSK8 ,Identifier Mask 8" "Masked,Not masked" bitfld.long 0x00 7. " MSK7 ,Identifier Mask 7" "Masked,Not masked" textline " " bitfld.long 0x00 6. " MSK6 ,Identifier Mask 6" "Masked,Not masked" bitfld.long 0x00 5. " MSK5 ,Identifier Mask 5" "Masked,Not masked" bitfld.long 0x00 4. " MSK4 ,Identifier Mask 4" "Masked,Not masked" textline " " bitfld.long 0x00 3. " MSK3 ,Identifier Mask 3" "Masked,Not masked" bitfld.long 0x00 2. " MSK2 ,Identifier Mask 2" "Masked,Not masked" bitfld.long 0x00 1. " MSK1 ,Identifier Mask 1" "Masked,Not masked" textline " " bitfld.long 0x00 0. " MSK0 ,Identifier Mask 0" "Masked,Not masked" line.long 0x04 "IF1ARB,IF1 Arbitration Register" bitfld.long 0x04 31. " MSGVAL ,Message Valid" "Not considered,Considered" bitfld.long 0x04 30. " XTD ,Extended Identifier" "Standard,Extended" bitfld.long 0x04 29. " DIR ,Message Direction" "Rx,Tx" textline " " hexmask.long 0x04 0.--28. 1. " ID ,Identifier Mask" line.long 0x08 "IF1MCTR,IF1 Message Control Register" bitfld.long 0x08 15. " NEWDAT ,New Data" "Not written,Written" bitfld.long 0x08 14. " MSGLST ,Message Lost" "Not lost,Lost" bitfld.long 0x08 13. " INTPND ,Interrupt Pending" "Not source,Source" textline " " bitfld.long 0x08 12. " UMASK ,Use Acceptance Mask" "Not used,Used" bitfld.long 0x08 11. " TXIE ,Transmit Interrupt Enable" "Disabled,Enabled" bitfld.long 0x08 10. " RXIE ,Receive Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 9. " RMTEN ,Remote Enable" "Disabled,Enabled" bitfld.long 0x08 8. " TXRQST ,Transmit Request" "Not requested,Requested" bitfld.long 0x08 7. " EOB ,End Of Block" "Not last,Last" textline " " bitfld.long 0x08 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,8,8,8,8,8,8,8" line.long 0x0C "IF1DA,IF1 Data A Register" hexmask.long.byte 0x0C 24.--31. 1. " DATA3 ,Data3" hexmask.long.byte 0x0C 16.--23. 1. " DATA2 ,Data2" hexmask.long.byte 0x0C 8.--15. 1. " DATA1 ,Data1" textline " " hexmask.long.byte 0x0C 0.--7. 1. " DATA0 ,Data0" line.long 0x10 "IF1DB,IF1 Data B Register" hexmask.long.byte 0x10 24.--31. 1. " DATA3 ,Data7" hexmask.long.byte 0x10 16.--23. 1. " DATA2 ,Data6" hexmask.long.byte 0x10 8.--15. 1. " DATA1 ,Data5" textline " " hexmask.long.byte 0x10 0.--7. 1. " DATA0 ,Data4" hgroup.long 0x120++0x3 hide.long 0x00 "IF2CMR,IF2 Command Register" in group.long (0x120+0x4)++0x13 line.long 0x00 "IF2MSK,IF2 Mask Register" bitfld.long 0x00 31. " MXTD ,Mask Extended Identifier" "Not accepted,Accepted" bitfld.long 0x00 30. " MDIR ,Mask Message Direction" "Not accepted,Accepted" bitfld.long 0x00 28. " MSK28 ,Identifier Mask 28" "Masked,Not masked" textline " " bitfld.long 0x00 27. " MSK27 ,Identifier Mask 27" "Masked,Not masked" bitfld.long 0x00 26. " MSK26 ,Identifier Mask 26" "Masked,Not masked" bitfld.long 0x00 25. " MSK25 ,Identifier Mask 25" "Masked,Not masked" textline " " bitfld.long 0x00 24. " MSK24 ,Identifier Mask 24" "Masked,Not masked" bitfld.long 0x00 23. " MSK23 ,Identifier Mask 23" "Masked,Not masked" bitfld.long 0x00 22. " MSK22 ,Identifier Mask 22" "Masked,Not masked" textline " " bitfld.long 0x00 21. " MSK21 ,Identifier Mask 21" "Masked,Not masked" bitfld.long 0x00 20. " MSK20 ,Identifier Mask 20" "Masked,Not masked" bitfld.long 0x00 19. " MSK19 ,Identifier Mask 19" "Masked,Not masked" textline " " bitfld.long 0x00 18. " MSK18 ,Identifier Mask 18" "Masked,Not masked" bitfld.long 0x00 17. " MSK17 ,Identifier Mask 17" "Masked,Not masked" bitfld.long 0x00 16. " MSK16 ,Identifier Mask 16" "Masked,Not masked" textline " " bitfld.long 0x00 15. " MSK15 ,Identifier Mask 15" "Masked,Not masked" bitfld.long 0x00 14. " MSK14 ,Identifier Mask 14" "Masked,Not masked" bitfld.long 0x00 13. " MSK13 ,Identifier Mask 13" "Masked,Not masked" textline " " bitfld.long 0x00 12. " MSK12 ,Identifier Mask 12" "Masked,Not masked" bitfld.long 0x00 11. " MSK11 ,Identifier Mask 11" "Masked,Not masked" bitfld.long 0x00 10. " MSK10 ,Identifier Mask 10" "Masked,Not masked" textline " " bitfld.long 0x00 9. " MSK9 ,Identifier Mask 9" "Masked,Not masked" bitfld.long 0x00 8. " MSK8 ,Identifier Mask 8" "Masked,Not masked" bitfld.long 0x00 7. " MSK7 ,Identifier Mask 7" "Masked,Not masked" textline " " bitfld.long 0x00 6. " MSK6 ,Identifier Mask 6" "Masked,Not masked" bitfld.long 0x00 5. " MSK5 ,Identifier Mask 5" "Masked,Not masked" bitfld.long 0x00 4. " MSK4 ,Identifier Mask 4" "Masked,Not masked" textline " " bitfld.long 0x00 3. " MSK3 ,Identifier Mask 3" "Masked,Not masked" bitfld.long 0x00 2. " MSK2 ,Identifier Mask 2" "Masked,Not masked" bitfld.long 0x00 1. " MSK1 ,Identifier Mask 1" "Masked,Not masked" textline " " bitfld.long 0x00 0. " MSK0 ,Identifier Mask 0" "Masked,Not masked" line.long 0x04 "IF2ARB,IF2 Arbitration Register" bitfld.long 0x04 31. " MSGVAL ,Message Valid" "Not considered,Considered" bitfld.long 0x04 30. " XTD ,Extended Identifier" "Standard,Extended" bitfld.long 0x04 29. " DIR ,Message Direction" "Rx,Tx" textline " " hexmask.long 0x04 0.--28. 1. " ID ,Identifier Mask" line.long 0x08 "IF2MCTR,IF2 Message Control Register" bitfld.long 0x08 15. " NEWDAT ,New Data" "Not written,Written" bitfld.long 0x08 14. " MSGLST ,Message Lost" "Not lost,Lost" bitfld.long 0x08 13. " INTPND ,Interrupt Pending" "Not source,Source" textline " " bitfld.long 0x08 12. " UMASK ,Use Acceptance Mask" "Not used,Used" bitfld.long 0x08 11. " TXIE ,Transmit Interrupt Enable" "Disabled,Enabled" bitfld.long 0x08 10. " RXIE ,Receive Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 9. " RMTEN ,Remote Enable" "Disabled,Enabled" bitfld.long 0x08 8. " TXRQST ,Transmit Request" "Not requested,Requested" bitfld.long 0x08 7. " EOB ,End Of Block" "Not last,Last" textline " " bitfld.long 0x08 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,8,8,8,8,8,8,8" line.long 0x0C "IF2DA,IF2 Data A Register" hexmask.long.byte 0x0C 24.--31. 1. " DATA3 ,Data3" hexmask.long.byte 0x0C 16.--23. 1. " DATA2 ,Data2" hexmask.long.byte 0x0C 8.--15. 1. " DATA1 ,Data1" textline " " hexmask.long.byte 0x0C 0.--7. 1. " DATA0 ,Data0" line.long 0x10 "IF2DB,IF2 Data B Register" hexmask.long.byte 0x10 24.--31. 1. " DATA3 ,Data7" hexmask.long.byte 0x10 16.--23. 1. " DATA2 ,Data6" hexmask.long.byte 0x10 8.--15. 1. " DATA1 ,Data5" textline " " hexmask.long.byte 0x10 0.--7. 1. " DATA0 ,Data4" tree.end width 0xB tree.end tree "CAN 1" base ad:0xFFC01000 width 9. tree "Protocol Group" group.long 0x00++0x3 line.long 0x00 "CCTRL,Control Register" bitfld.long 0x00 19. " DE2 ,DMA Enable for IF2" "Disabled,Enabled" bitfld.long 0x00 18. " DE1 ,DMA Enable for IF1" "Disabled,Enabled" bitfld.long 0x00 17. " MIL ,Message Object Interrupt Line Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " TEST ,Test Mode Enable" "Disabled,Enabled" bitfld.long 0x00 6. " CCE ,Configuration Change Enable" "Disabled,Enabled" bitfld.long 0x00 5. " DAR ,Disable Automatic Retransmission" "No,Yes" textline " " bitfld.long 0x00 3. " EIE ,Error Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. " SIE ,Status Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. " ILE ,Module Interrupt Line Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " INIT ,Initialization" "Normal,Started" hgroup.long 0x04++0x3 hide.long 0x00 "CSTS,Status Register" in rgroup.long 0x08++0x3 line.long 0x00 "CERC,Error Counter Register" bitfld.long 0x00 15. " RP ,Receive Error Passive" "Below,Reached" hexmask.long.byte 0x00 8.--14. 1. " REC ,Receive Error Counter" hexmask.long.byte 0x00 0.--7. 1. " TEC ,Transmit Error Counter" group.long 0x0C++0x3 line.long 0x00 "CBT,Bit Timing / BRP Extension Register" bitfld.long 0x00 16.--19. " BRPE ,Baud Rate Prescaler Extension" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--14. " TSEG2 ,The time segment after the sample point" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--11. " TSEG1 ,The time segment before the sample point" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,?..." textline " " bitfld.long 0x00 6.--7. " SJW ,(Re) Synchronization Jump Width" "0,1,2,3" bitfld.long 0x00 0.--5. " BRP ,Baud Rate Prescaler" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x10++0x3 line.long 0x00 "CIR,Interrupt Register" hexmask.long.byte 0x00 0.--7. 1. " INTID ,Interrupt Identifier" bitfld.long 0x00 15. " STATUSINT ,A Status Interrupt has occurred" "Not occurred,Occurred" group.long 0x14++0x7 line.long 0x00 "CTR,Test Register" rbitfld.long 0x00 7. " RX ,Receive Pin" "Dominant,Recessive" bitfld.long 0x00 5.--6. " TX ,Transmit Pin" "Reset,Sample,Dominant,Recessive" bitfld.long 0x00 4. " LBACK ,Loop Back Mode" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " SILENT ,Silent Mode" "Disabled,Enabled" line.long 0x04 "CFR,Function Register" bitfld.long 0x04 3. " RAMINIT ,Request for automatic RAM Initialization" "Not requested,Requested" bitfld.long 0x04 1. " CLKSTREQ ,Clock Stop Request" "Not requested,Requested" rbitfld.long 0x04 0. " CLKSTACK ,Clock Stop Acknowledgement" "Not acknowledged,Acknowledged" rgroup.long 0x20++0x7 line.long 0x00 "CRR,Core Release Register" bitfld.long 0x00 28.--31. " REL ,Core Release" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 20.--27. 1. " STEP ,Step of Core Release" bitfld.long 0x00 16.--19. " YEAR ,Design Time Stamp, Year" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " hexmask.long.byte 0x00 8.--15. 1. " MON ,Design Time Stamp, Month" hexmask.long.byte 0x00 0.--7. 1. " DAY ,Design Time Stamp, Day" line.long 0x04 "HWS,Hardware Configuration Status Register" bitfld.long 0x04 2. " PAREN ,Parity Generation" "Not presented,Presented" bitfld.long 0x04 0.--1. " MB_W ,Message Buffer Count" "16,32,64,128" tree.end tree "Message Handler Group" rgroup.long 0x84++0x4F line.long 0x00 "MOTRX,Transmission Request X Register" bitfld.long 0x00 15. " TXRQSTD[3] ,TxRqstD" "Not pending,Pending" bitfld.long 0x00 14. " TXRQSTD[2] ,TxRqstD" "Not pending,Pending" bitfld.long 0x00 13. " TXRQSTD[1] ,TxRqstD" "Not pending,Pending" textline " " bitfld.long 0x00 12. " TXRQSTD[0] ,TxRqstD" "Not pending,Pending" bitfld.long 0x00 11. " TXRQSTC[3] ,TxRqstC" "Not pending,Pending" bitfld.long 0x00 10. " TXRQSTC[2] ,TxRqstC" "Not pending,Pending" textline " " bitfld.long 0x00 9. " TXRQSTC[1] ,TxRqstC" "Not pending,Pending" bitfld.long 0x00 8. " TXRQSTC[0] ,TxRqstC" "Not pending,Pending" bitfld.long 0x00 7. " TXRQSTB[3] ,TxRqstB" "Not pending,Pending" textline " " bitfld.long 0x00 6. " TXRQSTB[2] ,TxRqstB" "Not pending,Pending" bitfld.long 0x00 5. " TXRQSTB[1] ,TxRqstB" "Not pending,Pending" bitfld.long 0x00 4. " TXRQSTB[0] ,TxRqstB" "Not pending,Pending" textline " " bitfld.long 0x00 3. " TXRQSTA[3] ,TxRqstA" "Not pending,Pending" bitfld.long 0x00 2. " TXRQSTA[2] ,TxRqstA" "Not pending,Pending" bitfld.long 0x00 1. " TXRQSTA[1] ,TxRqstA" "Not pending,Pending" textline " " bitfld.long 0x00 0. " TXRQSTA[0] ,TxRqstA" "Not pending,Pending" line.long 0x04 "MOTRA,Transmission Request A Register" bitfld.long 0x04 31. " TXRQST[31] ,Transmission request bit for Message Object 32" "Not pending,Pending" bitfld.long 0x04 30. " TXRQST[30] ,Transmission request bit for Message Object 31" "Not pending,Pending" bitfld.long 0x04 29. " TXRQST[29] ,Transmission request bit for Message Object 30" "Not pending,Pending" textline " " bitfld.long 0x04 28. " TXRQST[28] ,Transmission request bit for Message Object 29" "Not pending,Pending" bitfld.long 0x04 27. " TXRQST[27] ,Transmission request bit for Message Object 28" "Not pending,Pending" bitfld.long 0x04 26. " TXRQST[26] ,Transmission request bit for Message Object 27" "Not pending,Pending" textline " " bitfld.long 0x04 25. " TXRQST[25] ,Transmission request bit for Message Object 26" "Not pending,Pending" bitfld.long 0x04 24. " TXRQST[24] ,Transmission request bit for Message Object 25" "Not pending,Pending" bitfld.long 0x04 23. " TXRQST[23] ,Transmission request bit for Message Object 24" "Not pending,Pending" textline " " bitfld.long 0x04 22. " TXRQST[22] ,Transmission request bit for Message Object 23" "Not pending,Pending" bitfld.long 0x04 21. " TXRQST[21] ,Transmission request bit for Message Object 22" "Not pending,Pending" bitfld.long 0x04 20. " TXRQST[20] ,Transmission request bit for Message Object 21" "Not pending,Pending" textline " " bitfld.long 0x04 19. " TXRQST[19] ,Transmission request bit for Message Object 20" "Not pending,Pending" bitfld.long 0x04 18. " TXRQST[18] ,Transmission request bit for Message Object 19" "Not pending,Pending" bitfld.long 0x04 17. " TXRQST[17] ,Transmission request bit for Message Object 18" "Not pending,Pending" textline " " bitfld.long 0x04 16. " TXRQST[16] ,Transmission request bit for Message Object 17" "Not pending,Pending" bitfld.long 0x04 15. " TXRQST[15] ,Transmission request bit for Message Object 16" "Not pending,Pending" bitfld.long 0x04 14. " TXRQST[14] ,Transmission request bit for Message Object 15" "Not pending,Pending" textline " " bitfld.long 0x04 13. " TXRQST[13] ,Transmission request bit for Message Object 14" "Not pending,Pending" bitfld.long 0x04 12. " TXRQST[12] ,Transmission request bit for Message Object 13" "Not pending,Pending" bitfld.long 0x04 11. " TXRQST[11] ,Transmission request bit for Message Object 12" "Not pending,Pending" textline " " bitfld.long 0x04 10. " TXRQST[10] ,Transmission request bit for Message Object 11" "Not pending,Pending" bitfld.long 0x04 9. " TXRQST[9] ,Transmission request bit for Message Object 10" "Not pending,Pending" bitfld.long 0x04 8. " TXRQST[8] ,Transmission request bit for Message Object 9" "Not pending,Pending" textline " " bitfld.long 0x04 7. " TXRQST[7] ,Transmission request bit for Message Object 8" "Not pending,Pending" bitfld.long 0x04 6. " TXRQST[6] ,Transmission request bit for Message Object 7" "Not pending,Pending" bitfld.long 0x04 5. " TXRQST[5] ,Transmission request bit for Message Object 6" "Not pending,Pending" textline " " bitfld.long 0x04 4. " TXRQST[4] ,Transmission request bit for Message Object 5" "Not pending,Pending" bitfld.long 0x04 3. " TXRQST[3] ,Transmission request bit for Message Object 4" "Not pending,Pending" bitfld.long 0x04 2. " TXRQST[2] ,Transmission request bit for Message Object 3" "Not pending,Pending" textline " " bitfld.long 0x04 1. " TXRQST[1] ,Transmission request bit for Message Object 2" "Not pending,Pending" bitfld.long 0x04 0. " TXRQST[0] ,Transmission request bit for Message Object 1" "Not pending,Pending" line.long 0x08 "MOTRB,Transmission Request B Register" bitfld.long 0x08 31. " TXRQST[31] ,Transmission request bit for Message Object 64" "Not pending,Pending" bitfld.long 0x08 30. " TXRQST[30] ,Transmission request bit for Message Object 63" "Not pending,Pending" bitfld.long 0x08 29. " TXRQST[29] ,Transmission request bit for Message Object 62" "Not pending,Pending" textline " " bitfld.long 0x08 28. " TXRQST[28] ,Transmission request bit for Message Object 61" "Not pending,Pending" bitfld.long 0x08 27. " TXRQST[27] ,Transmission request bit for Message Object 60" "Not pending,Pending" bitfld.long 0x08 26. " TXRQST[26] ,Transmission request bit for Message Object 59" "Not pending,Pending" textline " " bitfld.long 0x08 25. " TXRQST[25] ,Transmission request bit for Message Object 58" "Not pending,Pending" bitfld.long 0x08 24. " TXRQST[24] ,Transmission request bit for Message Object 57" "Not pending,Pending" bitfld.long 0x08 23. " TXRQST[23] ,Transmission request bit for Message Object 56" "Not pending,Pending" textline " " bitfld.long 0x08 22. " TXRQST[22] ,Transmission request bit for Message Object 55" "Not pending,Pending" bitfld.long 0x08 21. " TXRQST[21] ,Transmission request bit for Message Object 54" "Not pending,Pending" bitfld.long 0x08 20. " TXRQST[20] ,Transmission request bit for Message Object 53" "Not pending,Pending" textline " " bitfld.long 0x08 19. " TXRQST[19] ,Transmission request bit for Message Object 52" "Not pending,Pending" bitfld.long 0x08 18. " TXRQST[18] ,Transmission request bit for Message Object 51" "Not pending,Pending" bitfld.long 0x08 17. " TXRQST[17] ,Transmission request bit for Message Object 50" "Not pending,Pending" textline " " bitfld.long 0x08 16. " TXRQST[16] ,Transmission request bit for Message Object 49" "Not pending,Pending" bitfld.long 0x08 15. " TXRQST[15] ,Transmission request bit for Message Object 48" "Not pending,Pending" bitfld.long 0x08 14. " TXRQST[14] ,Transmission request bit for Message Object 47" "Not pending,Pending" textline " " bitfld.long 0x08 13. " TXRQST[13] ,Transmission request bit for Message Object 46" "Not pending,Pending" bitfld.long 0x08 12. " TXRQST[12] ,Transmission request bit for Message Object 45" "Not pending,Pending" bitfld.long 0x08 11. " TXRQST[11] ,Transmission request bit for Message Object 44" "Not pending,Pending" textline " " bitfld.long 0x08 10. " TXRQST[10] ,Transmission request bit for Message Object 43" "Not pending,Pending" bitfld.long 0x08 9. " TXRQST[9] ,Transmission request bit for Message Object 42" "Not pending,Pending" bitfld.long 0x08 8. " TXRQST[8] ,Transmission request bit for Message Object 41" "Not pending,Pending" textline " " bitfld.long 0x08 7. " TXRQST[7] ,Transmission request bit for Message Object 40" "Not pending,Pending" bitfld.long 0x08 6. " TXRQST[6] ,Transmission request bit for Message Object 39" "Not pending,Pending" bitfld.long 0x08 5. " TXRQST[5] ,Transmission request bit for Message Object 38" "Not pending,Pending" textline " " bitfld.long 0x08 4. " TXRQST[4] ,Transmission request bit for Message Object 37" "Not pending,Pending" bitfld.long 0x08 3. " TXRQST[3] ,Transmission request bit for Message Object 36" "Not pending,Pending" bitfld.long 0x08 2. " TXRQST[2] ,Transmission request bit for Message Object 35" "Not pending,Pending" textline " " bitfld.long 0x08 1. " TXRQST[1] ,Transmission request bit for Message Object 34" "Not pending,Pending" bitfld.long 0x08 0. " TXRQST[0] ,Transmission request bit for Message Object 33" "Not pending,Pending" line.long 0x0C "MOTRC,Transmission Request C Register" bitfld.long 0x0C 31. " TXRQST[31] ,Transmission request bit for Message Object 96" "Not pending,Pending" bitfld.long 0x0C 30. " TXRQST[30] ,Transmission request bit for Message Object 95" "Not pending,Pending" bitfld.long 0x0C 29. " TXRQST[29] ,Transmission request bit for Message Object 94" "Not pending,Pending" textline " " bitfld.long 0x0C 28. " TXRQST[28] ,Transmission request bit for Message Object 93" "Not pending,Pending" bitfld.long 0x0C 27. " TXRQST[27] ,Transmission request bit for Message Object 92" "Not pending,Pending" bitfld.long 0x0C 26. " TXRQST[26] ,Transmission request bit for Message Object 91" "Not pending,Pending" textline " " bitfld.long 0x0C 25. " TXRQST[25] ,Transmission request bit for Message Object 90" "Not pending,Pending" bitfld.long 0x0C 24. " TXRQST[24] ,Transmission request bit for Message Object 89" "Not pending,Pending" bitfld.long 0x0C 23. " TXRQST[23] ,Transmission request bit for Message Object 88" "Not pending,Pending" textline " " bitfld.long 0x0C 22. " TXRQST[22] ,Transmission request bit for Message Object 87" "Not pending,Pending" bitfld.long 0x0C 21. " TXRQST[21] ,Transmission request bit for Message Object 86" "Not pending,Pending" bitfld.long 0x0C 20. " TXRQST[20] ,Transmission request bit for Message Object 85" "Not pending,Pending" textline " " bitfld.long 0x0C 19. " TXRQST[19] ,Transmission request bit for Message Object 84" "Not pending,Pending" bitfld.long 0x0C 18. " TXRQST[18] ,Transmission request bit for Message Object 83" "Not pending,Pending" bitfld.long 0x0C 17. " TXRQST[17] ,Transmission request bit for Message Object 82" "Not pending,Pending" textline " " bitfld.long 0x0C 16. " TXRQST[16] ,Transmission request bit for Message Object 81" "Not pending,Pending" bitfld.long 0x0C 15. " TXRQST[15] ,Transmission request bit for Message Object 80" "Not pending,Pending" bitfld.long 0x0C 14. " TXRQST[14] ,Transmission request bit for Message Object 79" "Not pending,Pending" textline " " bitfld.long 0x0C 13. " TXRQST[13] ,Transmission request bit for Message Object 78" "Not pending,Pending" bitfld.long 0x0C 12. " TXRQST[12] ,Transmission request bit for Message Object 77" "Not pending,Pending" bitfld.long 0x0C 11. " TXRQST[11] ,Transmission request bit for Message Object 76" "Not pending,Pending" textline " " bitfld.long 0x0C 10. " TXRQST[10] ,Transmission request bit for Message Object 75" "Not pending,Pending" bitfld.long 0x0C 9. " TXRQST[9] ,Transmission request bit for Message Object 74" "Not pending,Pending" bitfld.long 0x0C 8. " TXRQST[8] ,Transmission request bit for Message Object 73" "Not pending,Pending" textline " " bitfld.long 0x0C 7. " TXRQST[7] ,Transmission request bit for Message Object 72" "Not pending,Pending" bitfld.long 0x0C 6. " TXRQST[6] ,Transmission request bit for Message Object 71" "Not pending,Pending" bitfld.long 0x0C 5. " TXRQST[5] ,Transmission request bit for Message Object 70" "Not pending,Pending" textline " " bitfld.long 0x0C 4. " TXRQST[4] ,Transmission request bit for Message Object 69" "Not pending,Pending" bitfld.long 0x0C 3. " TXRQST[3] ,Transmission request bit for Message Object 68" "Not pending,Pending" bitfld.long 0x0C 2. " TXRQST[2] ,Transmission request bit for Message Object 67" "Not pending,Pending" textline " " bitfld.long 0x0C 1. " TXRQST[1] ,Transmission request bit for Message Object 66" "Not pending,Pending" bitfld.long 0x0C 0. " TXRQST[0] ,Transmission request bit for Message Object 65" "Not pending,Pending" line.long 0x10 "MOTRD,Transmission Request D Register" bitfld.long 0x10 31. " TXRQST[31] ,Transmission request bit for Message Object 128" "Not pending,Pending" bitfld.long 0x10 30. " TXRQST[30] ,Transmission request bit for Message Object 127" "Not pending,Pending" bitfld.long 0x10 29. " TXRQST[29] ,Transmission request bit for Message Object 126" "Not pending,Pending" textline " " bitfld.long 0x10 28. " TXRQST[28] ,Transmission request bit for Message Object 125" "Not pending,Pending" bitfld.long 0x10 27. " TXRQST[27] ,Transmission request bit for Message Object 124" "Not pending,Pending" bitfld.long 0x10 26. " TXRQST[26] ,Transmission request bit for Message Object 123" "Not pending,Pending" textline " " bitfld.long 0x10 25. " TXRQST[25] ,Transmission request bit for Message Object 122" "Not pending,Pending" bitfld.long 0x10 24. " TXRQST[24] ,Transmission request bit for Message Object 121" "Not pending,Pending" bitfld.long 0x10 23. " TXRQST[23] ,Transmission request bit for Message Object 120" "Not pending,Pending" textline " " bitfld.long 0x10 22. " TXRQST[22] ,Transmission request bit for Message Object 119" "Not pending,Pending" bitfld.long 0x10 21. " TXRQST[21] ,Transmission request bit for Message Object 118" "Not pending,Pending" bitfld.long 0x10 20. " TXRQST[20] ,Transmission request bit for Message Object 117" "Not pending,Pending" textline " " bitfld.long 0x10 19. " TXRQST[19] ,Transmission request bit for Message Object 116" "Not pending,Pending" bitfld.long 0x10 18. " TXRQST[18] ,Transmission request bit for Message Object 115" "Not pending,Pending" bitfld.long 0x10 17. " TXRQST[17] ,Transmission request bit for Message Object 114" "Not pending,Pending" textline " " bitfld.long 0x10 16. " TXRQST[16] ,Transmission request bit for Message Object 113" "Not pending,Pending" bitfld.long 0x10 15. " TXRQST[15] ,Transmission request bit for Message Object 112" "Not pending,Pending" bitfld.long 0x10 14. " TXRQST[14] ,Transmission request bit for Message Object 111" "Not pending,Pending" textline " " bitfld.long 0x10 13. " TXRQST[13] ,Transmission request bit for Message Object 110" "Not pending,Pending" bitfld.long 0x10 12. " TXRQST[12] ,Transmission request bit for Message Object 109" "Not pending,Pending" bitfld.long 0x10 11. " TXRQST[11] ,Transmission request bit for Message Object 108" "Not pending,Pending" textline " " bitfld.long 0x10 10. " TXRQST[10] ,Transmission request bit for Message Object 107" "Not pending,Pending" bitfld.long 0x10 9. " TXRQST[9] ,Transmission request bit for Message Object 106" "Not pending,Pending" bitfld.long 0x10 8. " TXRQST[8] ,Transmission request bit for Message Object 105" "Not pending,Pending" textline " " bitfld.long 0x10 7. " TXRQST[7] ,Transmission request bit for Message Object 104" "Not pending,Pending" bitfld.long 0x10 6. " TXRQST[6] ,Transmission request bit for Message Object 103" "Not pending,Pending" bitfld.long 0x10 5. " TXRQST[5] ,Transmission request bit for Message Object 102" "Not pending,Pending" textline " " bitfld.long 0x10 4. " TXRQST[4] ,Transmission request bit for Message Object 101" "Not pending,Pending" bitfld.long 0x10 3. " TXRQST[3] ,Transmission request bit for Message Object 100" "Not pending,Pending" bitfld.long 0x10 2. " TXRQST[2] ,Transmission request bit for Message Object 99" "Not pending,Pending" textline " " bitfld.long 0x10 1. " TXRQST[1] ,Transmission request bit for Message Object 98" "Not pending,Pending" bitfld.long 0x10 0. " TXRQST[0] ,Transmission request bit for Message Object 97" "Not pending,Pending" line.long 0x14 "MONDX,New Data X Register" bitfld.long 0x14 15. " NEWDATD[3] ,MONDD new data 3" "Not written,Written" bitfld.long 0x14 14. " NEWDATD[2] ,MONDD new data 2" "Not written,Written" bitfld.long 0x14 13. " NEWDATD[1] ,MONDD new data 1" "Not written,Written" textline " " bitfld.long 0x14 12. " NEWDATD[0] ,MONDD new data 0" "Not written,Written" bitfld.long 0x14 11. " NEWDATC[3] ,MONDC new data 3" "Not written,Written" bitfld.long 0x14 10. " NEWDATC[2] ,MONDC new data 2" "Not written,Written" textline " " bitfld.long 0x14 9. " NEWDATC[1] ,MONDC new data 1" "Not written,Written" bitfld.long 0x14 8. " NEWDATC[0] ,MONDC new data 0" "Not written,Written" bitfld.long 0x14 7. " NEWDATB[3] ,MONDB new data 3" "Not written,Written" textline " " bitfld.long 0x14 6. " NEWDATB[2] ,MONDB new data 2" "Not written,Written" bitfld.long 0x14 5. " NEWDATB[1] ,MONDB new data 1" "Not written,Written" bitfld.long 0x14 4. " NEWDATB[0] ,MONDB new data 0" "Not written,Written" textline " " bitfld.long 0x14 3. " NEWDATA[3] ,MONDA new data 3" "Not written,Written" bitfld.long 0x14 2. " NEWDATA[2] ,MONDA new data 2" "Not written,Written" bitfld.long 0x14 1. " NEWDATA[1] ,MONDA new data 1" "Not written,Written" textline " " bitfld.long 0x14 0. " NEWDATA[0] ,MONDA new data 0" "Not written,Written" line.long 0x18 "MONDA,New Data A Register" bitfld.long 0x18 31. " NEWDAT[31] ,New data bits for Message Object 32" "Not written,Written" bitfld.long 0x18 30. " NEWDAT[30] ,New data bits for Message Object 31" "Not written,Written" bitfld.long 0x18 29. " NEWDAT[29] ,New data bits for Message Object 30" "Not written,Written" textline " " bitfld.long 0x18 28. " NEWDAT[28] ,New data bits for Message Object 29" "Not written,Written" bitfld.long 0x18 27. " NEWDAT[27] ,New data bits for Message Object 28" "Not written,Written" bitfld.long 0x18 26. " NEWDAT[26] ,New data bits for Message Object 27" "Not written,Written" textline " " bitfld.long 0x18 25. " NEWDAT[25] ,New data bits for Message Object 26" "Not written,Written" bitfld.long 0x18 24. " NEWDAT[24] ,New data bits for Message Object 25" "Not written,Written" bitfld.long 0x18 23. " NEWDAT[23] ,New data bits for Message Object 24" "Not written,Written" textline " " bitfld.long 0x18 22. " NEWDAT[22] ,New data bits for Message Object 23" "Not written,Written" bitfld.long 0x18 21. " NEWDAT[21] ,New data bits for Message Object 22" "Not written,Written" bitfld.long 0x18 20. " NEWDAT[20] ,New data bits for Message Object 21" "Not written,Written" textline " " bitfld.long 0x18 19. " NEWDAT[19] ,New data bits for Message Object 20" "Not written,Written" bitfld.long 0x18 18. " NEWDAT[18] ,New data bits for Message Object 19" "Not written,Written" bitfld.long 0x18 17. " NEWDAT[17] ,New data bits for Message Object 18" "Not written,Written" textline " " bitfld.long 0x18 16. " NEWDAT[16] ,New data bits for Message Object 17" "Not written,Written" bitfld.long 0x18 15. " NEWDAT[15] ,New data bits for Message Object 16" "Not written,Written" bitfld.long 0x18 14. " NEWDAT[14] ,New data bits for Message Object 15" "Not written,Written" textline " " bitfld.long 0x18 13. " NEWDAT[13] ,New data bits for Message Object 14" "Not written,Written" bitfld.long 0x18 12. " NEWDAT[12] ,New data bits for Message Object 13" "Not written,Written" bitfld.long 0x18 11. " NEWDAT[11] ,New data bits for Message Object 12" "Not written,Written" textline " " bitfld.long 0x18 10. " NEWDAT[10] ,New data bits for Message Object 11" "Not written,Written" bitfld.long 0x18 9. " NEWDAT[9] ,New data bits for Message Object 10" "Not written,Written" bitfld.long 0x18 8. " NEWDAT[8] ,New data bits for Message Object 9" "Not written,Written" textline " " bitfld.long 0x18 7. " NEWDAT[7] ,New data bits for Message Object 8" "Not written,Written" bitfld.long 0x18 6. " NEWDAT[6] ,New data bits for Message Object 7" "Not written,Written" bitfld.long 0x18 5. " NEWDAT[5] ,New data bits for Message Object 6" "Not written,Written" textline " " bitfld.long 0x18 4. " NEWDAT[4] ,New data bits for Message Object 5" "Not written,Written" bitfld.long 0x18 3. " NEWDAT[3] ,New data bits for Message Object 4" "Not written,Written" bitfld.long 0x18 2. " NEWDAT[2] ,New data bits for Message Object 3" "Not written,Written" textline " " bitfld.long 0x18 1. " NEWDAT[1] ,New data bits for Message Object 2" "Not written,Written" bitfld.long 0x18 0. " NEWDAT[0] ,New data bits for Message Object 1" "Not written,Written" line.long 0x1C "MONDB,New Data B Register" bitfld.long 0x1C 31. " NEWDAT[31] ,New data bits for Message Object 64" "Not written,Written" bitfld.long 0x1C 30. " NEWDAT[30] ,New data bits for Message Object 63" "Not written,Written" bitfld.long 0x1C 29. " NEWDAT[29] ,New data bits for Message Object 62" "Not written,Written" textline " " bitfld.long 0x1C 28. " NEWDAT[28] ,New data bits for Message Object 61" "Not written,Written" bitfld.long 0x1C 27. " NEWDAT[27] ,New data bits for Message Object 60" "Not written,Written" bitfld.long 0x1C 26. " NEWDAT[26] ,New data bits for Message Object 59" "Not written,Written" textline " " bitfld.long 0x1C 25. " NEWDAT[25] ,New data bits for Message Object 58" "Not written,Written" bitfld.long 0x1C 24. " NEWDAT[24] ,New data bits for Message Object 57" "Not written,Written" bitfld.long 0x1C 23. " NEWDAT[23] ,New data bits for Message Object 56" "Not written,Written" textline " " bitfld.long 0x1C 22. " NEWDAT[22] ,New data bits for Message Object 55" "Not written,Written" bitfld.long 0x1C 21. " NEWDAT[21] ,New data bits for Message Object 54" "Not written,Written" bitfld.long 0x1C 20. " NEWDAT[20] ,New data bits for Message Object 53" "Not written,Written" textline " " bitfld.long 0x1C 19. " NEWDAT[19] ,New data bits for Message Object 52" "Not written,Written" bitfld.long 0x1C 18. " NEWDAT[18] ,New data bits for Message Object 51" "Not written,Written" bitfld.long 0x1C 17. " NEWDAT[17] ,New data bits for Message Object 50" "Not written,Written" textline " " bitfld.long 0x1C 16. " NEWDAT[16] ,New data bits for Message Object 49" "Not written,Written" bitfld.long 0x1C 15. " NEWDAT[15] ,New data bits for Message Object 48" "Not written,Written" bitfld.long 0x1C 14. " NEWDAT[14] ,New data bits for Message Object 47" "Not written,Written" textline " " bitfld.long 0x1C 13. " NEWDAT[13] ,New data bits for Message Object 46" "Not written,Written" bitfld.long 0x1C 12. " NEWDAT[12] ,New data bits for Message Object 45" "Not written,Written" bitfld.long 0x1C 11. " NEWDAT[11] ,New data bits for Message Object 44" "Not written,Written" textline " " bitfld.long 0x1C 10. " NEWDAT[10] ,New data bits for Message Object 43" "Not written,Written" bitfld.long 0x1C 9. " NEWDAT[9] ,New data bits for Message Object 42" "Not written,Written" bitfld.long 0x1C 8. " NEWDAT[8] ,New data bits for Message Object 41" "Not written,Written" textline " " bitfld.long 0x1C 7. " NEWDAT[7] ,New data bits for Message Object 40" "Not written,Written" bitfld.long 0x1C 6. " NEWDAT[6] ,New data bits for Message Object 39" "Not written,Written" bitfld.long 0x1C 5. " NEWDAT[5] ,New data bits for Message Object 38" "Not written,Written" textline " " bitfld.long 0x1C 4. " NEWDAT[4] ,New data bits for Message Object 37" "Not written,Written" bitfld.long 0x1C 3. " NEWDAT[3] ,New data bits for Message Object 36" "Not written,Written" bitfld.long 0x1C 2. " NEWDAT[2] ,New data bits for Message Object 35" "Not written,Written" textline " " bitfld.long 0x1C 1. " NEWDAT[1] ,New data bits for Message Object 34" "Not written,Written" bitfld.long 0x1C 0. " NEWDAT[0] ,New data bits for Message Object 33" "Not written,Written" line.long 0x20 "MONDC,New Data C Register" bitfld.long 0x20 31. " NEWDAT[31] ,New data bits for Message Object 96" "Not written,Written" bitfld.long 0x20 30. " NEWDAT[30] ,New data bits for Message Object 95" "Not written,Written" bitfld.long 0x20 29. " NEWDAT[29] ,New data bits for Message Object 94" "Not written,Written" textline " " bitfld.long 0x20 28. " NEWDAT[28] ,New data bits for Message Object 93" "Not written,Written" bitfld.long 0x20 27. " NEWDAT[27] ,New data bits for Message Object 92" "Not written,Written" bitfld.long 0x20 26. " NEWDAT[26] ,New data bits for Message Object 91" "Not written,Written" textline " " bitfld.long 0x20 25. " NEWDAT[25] ,New data bits for Message Object 90" "Not written,Written" bitfld.long 0x20 24. " NEWDAT[24] ,New data bits for Message Object 89" "Not written,Written" bitfld.long 0x20 23. " NEWDAT[23] ,New data bits for Message Object 88" "Not written,Written" textline " " bitfld.long 0x20 22. " NEWDAT[22] ,New data bits for Message Object 87" "Not written,Written" bitfld.long 0x20 21. " NEWDAT[21] ,New data bits for Message Object 86" "Not written,Written" bitfld.long 0x20 20. " NEWDAT[20] ,New data bits for Message Object 85" "Not written,Written" textline " " bitfld.long 0x20 19. " NEWDAT[19] ,New data bits for Message Object 84" "Not written,Written" bitfld.long 0x20 18. " NEWDAT[18] ,New data bits for Message Object 83" "Not written,Written" bitfld.long 0x20 17. " NEWDAT[17] ,New data bits for Message Object 82" "Not written,Written" textline " " bitfld.long 0x20 16. " NEWDAT[16] ,New data bits for Message Object 81" "Not written,Written" bitfld.long 0x20 15. " NEWDAT[15] ,New data bits for Message Object 80" "Not written,Written" bitfld.long 0x20 14. " NEWDAT[14] ,New data bits for Message Object 79" "Not written,Written" textline " " bitfld.long 0x20 13. " NEWDAT[13] ,New data bits for Message Object 78" "Not written,Written" bitfld.long 0x20 12. " NEWDAT[12] ,New data bits for Message Object 77" "Not written,Written" bitfld.long 0x20 11. " NEWDAT[11] ,New data bits for Message Object 76" "Not written,Written" textline " " bitfld.long 0x20 10. " NEWDAT[10] ,New data bits for Message Object 75" "Not written,Written" bitfld.long 0x20 9. " NEWDAT[9] ,New data bits for Message Object 74" "Not written,Written" bitfld.long 0x20 8. " NEWDAT[8] ,New data bits for Message Object 73" "Not written,Written" textline " " bitfld.long 0x20 7. " NEWDAT[7] ,New data bits for Message Object 72" "Not written,Written" bitfld.long 0x20 6. " NEWDAT[6] ,New data bits for Message Object 71" "Not written,Written" bitfld.long 0x20 5. " NEWDAT[5] ,New data bits for Message Object 70" "Not written,Written" textline " " bitfld.long 0x20 4. " NEWDAT[4] ,New data bits for Message Object 69" "Not written,Written" bitfld.long 0x20 3. " NEWDAT[3] ,New data bits for Message Object 68" "Not written,Written" bitfld.long 0x20 2. " NEWDAT[2] ,New data bits for Message Object 67" "Not written,Written" textline " " bitfld.long 0x20 1. " NEWDAT[1] ,New data bits for Message Object 66" "Not written,Written" bitfld.long 0x20 0. " NEWDAT[0] ,New data bits for Message Object 65" "Not written,Written" line.long 0x24 "MONDD,New Data D Register" bitfld.long 0x24 31. " NEWDAT[31] ,New data bits for Message Object 128" "Not written,Written" bitfld.long 0x24 30. " NEWDAT[30] ,New data bits for Message Object 127" "Not written,Written" bitfld.long 0x24 29. " NEWDAT[29] ,New data bits for Message Object 126" "Not written,Written" textline " " bitfld.long 0x24 28. " NEWDAT[28] ,New data bits for Message Object 125" "Not written,Written" bitfld.long 0x24 27. " NEWDAT[27] ,New data bits for Message Object 124" "Not written,Written" bitfld.long 0x24 26. " NEWDAT[26] ,New data bits for Message Object 123" "Not written,Written" textline " " bitfld.long 0x24 25. " NEWDAT[25] ,New data bits for Message Object 122" "Not written,Written" bitfld.long 0x24 24. " NEWDAT[24] ,New data bits for Message Object 121" "Not written,Written" bitfld.long 0x24 23. " NEWDAT[23] ,New data bits for Message Object 120" "Not written,Written" textline " " bitfld.long 0x24 22. " NEWDAT[22] ,New data bits for Message Object 119" "Not written,Written" bitfld.long 0x24 21. " NEWDAT[21] ,New data bits for Message Object 118" "Not written,Written" bitfld.long 0x24 20. " NEWDAT[20] ,New data bits for Message Object 117" "Not written,Written" textline " " bitfld.long 0x24 19. " NEWDAT[19] ,New data bits for Message Object 116" "Not written,Written" bitfld.long 0x24 18. " NEWDAT[18] ,New data bits for Message Object 115" "Not written,Written" bitfld.long 0x24 17. " NEWDAT[17] ,New data bits for Message Object 114" "Not written,Written" textline " " bitfld.long 0x24 16. " NEWDAT[16] ,New data bits for Message Object 113" "Not written,Written" bitfld.long 0x24 15. " NEWDAT[15] ,New data bits for Message Object 112" "Not written,Written" bitfld.long 0x24 14. " NEWDAT[14] ,New data bits for Message Object 111" "Not written,Written" textline " " bitfld.long 0x24 13. " NEWDAT[13] ,New data bits for Message Object 110" "Not written,Written" bitfld.long 0x24 12. " NEWDAT[12] ,New data bits for Message Object 109" "Not written,Written" bitfld.long 0x24 11. " NEWDAT[11] ,New data bits for Message Object 108" "Not written,Written" textline " " bitfld.long 0x24 10. " NEWDAT[10] ,New data bits for Message Object 107" "Not written,Written" bitfld.long 0x24 9. " NEWDAT[9] ,New data bits for Message Object 106" "Not written,Written" bitfld.long 0x24 8. " NEWDAT[8] ,New data bits for Message Object 105" "Not written,Written" textline " " bitfld.long 0x24 7. " NEWDAT[7] ,New data bits for Message Object 104" "Not written,Written" bitfld.long 0x24 6. " NEWDAT[6] ,New data bits for Message Object 103" "Not written,Written" bitfld.long 0x24 5. " NEWDAT[5] ,New data bits for Message Object 102" "Not written,Written" textline " " bitfld.long 0x24 4. " NEWDAT[4] ,New data bits for Message Object 101" "Not written,Written" bitfld.long 0x24 3. " NEWDAT[3] ,New data bits for Message Object 100" "Not written,Written" bitfld.long 0x24 2. " NEWDAT[2] ,New data bits for Message Object 99" "Not written,Written" textline " " bitfld.long 0x24 1. " NEWDAT[1] ,New data bits for Message Object 99" "Not written,Written" bitfld.long 0x24 0. " NEWDAT[0] ,New data bits for Message Object 98" "Not written,Written" line.long 0x28 "MOIPX,Interrupt Pending X Register" bitfld.long 0x28 15. " INTPNDD[3] ,MOIPD Interrupt Pending 3" "Not source,Source" bitfld.long 0x28 14. " INTPNDD[2] ,MOIPD Interrupt Pending 2" "Not source,Source" bitfld.long 0x28 13. " INTPNDD[1] ,MOIPD Interrupt Pending 1" "Not source,Source" textline " " bitfld.long 0x28 12. " INTPNDD[0] ,MOIPD Interrupt Pending 0" "Not source,Source" bitfld.long 0x28 11. " INTPNDC[3] ,MOIPC Interrupt Pending 3" "Not source,Source" bitfld.long 0x28 10. " INTPNDC[2] ,MOIPC Interrupt Pending 2" "Not source,Source" textline " " bitfld.long 0x28 9. " INTPNDC[1] ,MOIPC Interrupt Pending 1" "Not source,Source" bitfld.long 0x28 8. " INTPNDC[0] ,MOIPC Interrupt Pending 0" "Not source,Source" bitfld.long 0x28 7. " INTPNDB[3] ,MOIPB Interrupt Pending 3" "Not source,Source" textline " " bitfld.long 0x28 6. " INTPNDB[2] ,MOIPB Interrupt Pending 2" "Not source,Source" bitfld.long 0x28 5. " INTPNDB[1] ,MOIPB Interrupt Pending 1" "Not source,Source" bitfld.long 0x28 4. " INTPNDB[0] ,MOIPB Interrupt Pending 0" "Not source,Source" textline " " bitfld.long 0x28 3. " INTPNDA[3] ,MOIPA Interrupt Pending 3" "Not source,Source" bitfld.long 0x28 2. " INTPNDA[2] ,MOIPA Interrupt Pending 2" "Not source,Source" bitfld.long 0x28 1. " INTPNDA[1] ,MOIPA Interrupt Pending 1" "Not source,Source" textline " " bitfld.long 0x28 0. " INTPNDA[0] ,MOIPA Interrupt Pending 0" "Not source,Source" line.long 0x2C "MOIPA,Interrupt Pending A Register" bitfld.long 0x2C 31. " INTPND[31] ,Interrupt pending bit 32 for Message Object" "Not source,Source" bitfld.long 0x2C 30. " INTPND[30] ,Interrupt pending bit 31 for Message Object" "Not source,Source" bitfld.long 0x2C 29. " INTPND[29] ,Interrupt pending bit 30 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 28. " INTPND[28] ,Interrupt pending bit 29 for Message Object" "Not source,Source" bitfld.long 0x2C 27. " INTPND[27] ,Interrupt pending bit 28 for Message Object" "Not source,Source" bitfld.long 0x2C 26. " INTPND[26] ,Interrupt pending bit 27 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 25. " INTPND[25] ,Interrupt pending bit 26 for Message Object" "Not source,Source" bitfld.long 0x2C 24. " INTPND[24] ,Interrupt pending bit 25 for Message Object" "Not source,Source" bitfld.long 0x2C 23. " INTPND[23] ,Interrupt pending bit 24 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 22. " INTPND[22] ,Interrupt pending bit 23 for Message Object" "Not source,Source" bitfld.long 0x2C 21. " INTPND[21] ,Interrupt pending bit 22 for Message Object" "Not source,Source" bitfld.long 0x2C 20. " INTPND[20] ,Interrupt pending bit 21 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 19. " INTPND[19] ,Interrupt pending bit 20 for Message Object" "Not source,Source" bitfld.long 0x2C 18. " INTPND[18] ,Interrupt pending bit 19 for Message Object" "Not source,Source" bitfld.long 0x2C 17. " INTPND[17] ,Interrupt pending bit 18 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 16. " INTPND[16] ,Interrupt pending bit 17 for Message Object" "Not source,Source" bitfld.long 0x2C 15. " INTPND[15] ,Interrupt pending bit 16 for Message Object" "Not source,Source" bitfld.long 0x2C 14. " INTPND[14] ,Interrupt pending bit 15 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 13. " INTPND[13] ,Interrupt pending bit 14 for Message Object" "Not source,Source" bitfld.long 0x2C 12. " INTPND[12] ,Interrupt pending bit 13 for Message Object" "Not source,Source" bitfld.long 0x2C 11. " INTPND[11] ,Interrupt pending bit 12 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 10. " INTPND[10] ,Interrupt pending bit 11 for Message Object" "Not source,Source" bitfld.long 0x2C 9. " INTPND[9] ,Interrupt pending bit 10 for Message Object" "Not source,Source" bitfld.long 0x2C 8. " INTPND[8] ,Interrupt pending bit 9 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 7. " INTPND[7] ,Interrupt pending bit 8 for Message Object" "Not source,Source" bitfld.long 0x2C 6. " INTPND[6] ,Interrupt pending bit 7 for Message Object" "Not source,Source" bitfld.long 0x2C 5. " INTPND[5] ,Interrupt pending bit 6 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 4. " INTPND[4] ,Interrupt pending bit 5 for Message Object" "Not source,Source" bitfld.long 0x2C 3. " INTPND[3] ,Interrupt pending bit 4 for Message Object" "Not source,Source" bitfld.long 0x2C 2. " INTPND[2] ,Interrupt pending bit 3 for Message Object" "Not source,Source" textline " " bitfld.long 0x2C 1. " INTPND[1] ,Interrupt pending bit 2 for Message Object" "Not source,Source" bitfld.long 0x2C 0. " INTPND[0] ,Interrupt pending bit 1 for Message Object" "Not source,Source" line.long 0x30 "MOIPB,Interrupt Pending B Register" bitfld.long 0x30 31. " INTPND[31] ,Interrupt pending bit 64 for Message Object" "Not source,Source" bitfld.long 0x30 30. " INTPND[30] ,Interrupt pending bit 63 for Message Object" "Not source,Source" bitfld.long 0x30 29. " INTPND[29] ,Interrupt pending bit 62 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 28. " INTPND[28] ,Interrupt pending bit 61 for Message Object" "Not source,Source" bitfld.long 0x30 27. " INTPND[27] ,Interrupt pending bit 60 for Message Object" "Not source,Source" bitfld.long 0x30 26. " INTPND[26] ,Interrupt pending bit 59 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 25. " INTPND[25] ,Interrupt pending bit 58 for Message Object" "Not source,Source" bitfld.long 0x30 24. " INTPND[24] ,Interrupt pending bit 57 for Message Object" "Not source,Source" bitfld.long 0x30 23. " INTPND[23] ,Interrupt pending bit 56 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 22. " INTPND[22] ,Interrupt pending bit 55 for Message Object" "Not source,Source" bitfld.long 0x30 21. " INTPND[21] ,Interrupt pending bit 54 for Message Object" "Not source,Source" bitfld.long 0x30 20. " INTPND[20] ,Interrupt pending bit 53 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 19. " INTPND[19] ,Interrupt pending bit 52 for Message Object" "Not source,Source" bitfld.long 0x30 18. " INTPND[18] ,Interrupt pending bit 51 for Message Object" "Not source,Source" bitfld.long 0x30 17. " INTPND[17] ,Interrupt pending bit 50 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 16. " INTPND[16] ,Interrupt pending bit 49 for Message Object" "Not source,Source" bitfld.long 0x30 15. " INTPND[15] ,Interrupt pending bit 48 for Message Object" "Not source,Source" bitfld.long 0x30 14. " INTPND[14] ,Interrupt pending bit 47 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 13. " INTPND[13] ,Interrupt pending bit 46 for Message Object" "Not source,Source" bitfld.long 0x30 12. " INTPND[12] ,Interrupt pending bit 45 for Message Object" "Not source,Source" bitfld.long 0x30 11. " INTPND[11] ,Interrupt pending bit 44 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 10. " INTPND[10] ,Interrupt pending bit 43 for Message Object" "Not source,Source" bitfld.long 0x30 9. " INTPND[9] ,Interrupt pending bit 42 for Message Object" "Not source,Source" bitfld.long 0x30 8. " INTPND[8] ,Interrupt pending bit 41 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 7. " INTPND[7] ,Interrupt pending bit 40 for Message Object" "Not source,Source" bitfld.long 0x30 6. " INTPND[6] ,Interrupt pending bit 39 for Message Object" "Not source,Source" bitfld.long 0x30 5. " INTPND[5] ,Interrupt pending bit 38 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 4. " INTPND[4] ,Interrupt pending bit 37 for Message Object" "Not source,Source" bitfld.long 0x30 3. " INTPND[3] ,Interrupt pending bit 36 for Message Object" "Not source,Source" bitfld.long 0x30 2. " INTPND[2] ,Interrupt pending bit 35 for Message Object" "Not source,Source" textline " " bitfld.long 0x30 1. " INTPND[1] ,Interrupt pending bit 34 for Message Object" "Not source,Source" bitfld.long 0x30 0. " INTPND[0] ,Interrupt pending bit 33 for Message Object" "Not source,Source" line.long 0x34 "MOIPC,Interrupt Pending C Register" bitfld.long 0x34 31. " INTPND[31] ,Interrupt pending bit 96 for Message Object" "Not source,Source" bitfld.long 0x34 30. " INTPND[30] ,Interrupt pending bit 95 for Message Object" "Not source,Source" bitfld.long 0x34 29. " INTPND[29] ,Interrupt pending bit 94 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 28. " INTPND[28] ,Interrupt pending bit 93 for Message Object" "Not source,Source" bitfld.long 0x34 27. " INTPND[27] ,Interrupt pending bit 92 for Message Object" "Not source,Source" bitfld.long 0x34 26. " INTPND[26] ,Interrupt pending bit 91 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 25. " INTPND[25] ,Interrupt pending bit 90 for Message Object" "Not source,Source" bitfld.long 0x34 24. " INTPND[24] ,Interrupt pending bit 89 for Message Object" "Not source,Source" bitfld.long 0x34 23. " INTPND[23] ,Interrupt pending bit 88 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 22. " INTPND[22] ,Interrupt pending bit 87 for Message Object" "Not source,Source" bitfld.long 0x34 21. " INTPND[21] ,Interrupt pending bit 86 for Message Object" "Not source,Source" bitfld.long 0x34 20. " INTPND[20] ,Interrupt pending bit 85 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 19. " INTPND[19] ,Interrupt pending bit 84 for Message Object" "Not source,Source" bitfld.long 0x34 18. " INTPND[18] ,Interrupt pending bit 83 for Message Object" "Not source,Source" bitfld.long 0x34 17. " INTPND[17] ,Interrupt pending bit 82 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 16. " INTPND[16] ,Interrupt pending bit 81 for Message Object" "Not source,Source" bitfld.long 0x34 15. " INTPND[15] ,Interrupt pending bit 80 for Message Object" "Not source,Source" bitfld.long 0x34 14. " INTPND[14] ,Interrupt pending bit 79 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 13. " INTPND[13] ,Interrupt pending bit 78 for Message Object" "Not source,Source" bitfld.long 0x34 12. " INTPND[12] ,Interrupt pending bit 77 for Message Object" "Not source,Source" bitfld.long 0x34 11. " INTPND[11] ,Interrupt pending bit 76 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 10. " INTPND[10] ,Interrupt pending bit 75 for Message Object" "Not source,Source" bitfld.long 0x34 9. " INTPND[9] ,Interrupt pending bit 74 for Message Object" "Not source,Source" bitfld.long 0x34 8. " INTPND[8] ,Interrupt pending bit 73 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 7. " INTPND[7] ,Interrupt pending bit 72 for Message Object" "Not source,Source" bitfld.long 0x34 6. " INTPND[6] ,Interrupt pending bit 71 for Message Object" "Not source,Source" bitfld.long 0x34 5. " INTPND[5] ,Interrupt pending bit 70 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 4. " INTPND[4] ,Interrupt pending bit 69 for Message Object" "Not source,Source" bitfld.long 0x34 3. " INTPND[3] ,Interrupt pending bit 68 for Message Object" "Not source,Source" bitfld.long 0x34 2. " INTPND[2] ,Interrupt pending bit 67 for Message Object" "Not source,Source" textline " " bitfld.long 0x34 1. " INTPND[1] ,Interrupt pending bit 66 for Message Object" "Not source,Source" bitfld.long 0x34 0. " INTPND[0] ,Interrupt pending bit 65 for Message Object" "Not source,Source" line.long 0x38 "MOIPD,Interrupt Pending D Register" bitfld.long 0x38 31. " INTPND[31] ,Interrupt pending bit 128 for Message Object" "Not source,Source" bitfld.long 0x38 30. " INTPND[30] ,Interrupt pending bit 127 for Message Object" "Not source,Source" bitfld.long 0x38 29. " INTPND[29] ,Interrupt pending bit 126 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 28. " INTPND[28] ,Interrupt pending bit 125 for Message Object" "Not source,Source" bitfld.long 0x38 27. " INTPND[27] ,Interrupt pending bit 124 for Message Object" "Not source,Source" bitfld.long 0x38 26. " INTPND[26] ,Interrupt pending bit 123 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 25. " INTPND[25] ,Interrupt pending bit 122 for Message Object" "Not source,Source" bitfld.long 0x38 24. " INTPND[24] ,Interrupt pending bit 121 for Message Object" "Not source,Source" bitfld.long 0x38 23. " INTPND[23] ,Interrupt pending bit 120 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 22. " INTPND[22] ,Interrupt pending bit 119 for Message Object" "Not source,Source" bitfld.long 0x38 21. " INTPND[21] ,Interrupt pending bit 118 for Message Object" "Not source,Source" bitfld.long 0x38 20. " INTPND[20] ,Interrupt pending bit 117 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 19. " INTPND[19] ,Interrupt pending bit 116 for Message Object" "Not source,Source" bitfld.long 0x38 18. " INTPND[18] ,Interrupt pending bit 115 for Message Object" "Not source,Source" bitfld.long 0x38 17. " INTPND[17] ,Interrupt pending bit 114 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 16. " INTPND[16] ,Interrupt pending bit 113 for Message Object" "Not source,Source" bitfld.long 0x38 15. " INTPND[15] ,Interrupt pending bit 112 for Message Object" "Not source,Source" bitfld.long 0x38 14. " INTPND[14] ,Interrupt pending bit 111 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 13. " INTPND[13] ,Interrupt pending bit 110 for Message Object" "Not source,Source" bitfld.long 0x38 12. " INTPND[12] ,Interrupt pending bit 109 for Message Object" "Not source,Source" bitfld.long 0x38 11. " INTPND[11] ,Interrupt pending bit 108 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 10. " INTPND[10] ,Interrupt pending bit 107 for Message Object" "Not source,Source" bitfld.long 0x38 9. " INTPND[9] ,Interrupt pending bit 106 for Message Object" "Not source,Source" bitfld.long 0x38 8. " INTPND[8] ,Interrupt pending bit 105 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 7. " INTPND[7] ,Interrupt pending bit 104 for Message Object" "Not source,Source" bitfld.long 0x38 6. " INTPND[6] ,Interrupt pending bit 103 for Message Object" "Not source,Source" bitfld.long 0x38 5. " INTPND[5] ,Interrupt pending bit 102 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 4. " INTPND[4] ,Interrupt pending bit 101 for Message Object" "Not source,Source" bitfld.long 0x38 3. " INTPND[3] ,Interrupt pending bit 100 for Message Object" "Not source,Source" bitfld.long 0x38 2. " INTPND[2] ,Interrupt pending bit 99 for Message Object" "Not source,Source" textline " " bitfld.long 0x38 1. " INTPND[1] ,Interrupt pending bit 98 for Message Object" "Not source,Source" bitfld.long 0x38 0. " INTPND[0] ,Interrupt pending bit 97 for Message Object" "Not source,Source" line.long 0x3C "MOVALX,Message Valid X Register" bitfld.long 0x3C 15. " MSGVALD[3] ,MOVALD Message Valid 3" "Not considered,Considered" bitfld.long 0x3C 14. " MSGVALD[2] ,MOVALD Message Valid 2" "Not considered,Considered" bitfld.long 0x3C 13. " MSGVALD[1] ,MOVALD Message Valid 1" "Not considered,Considered" textline " " bitfld.long 0x3C 12. " MSGVALD[0] ,MOVALD Message Valid 0" "Not considered,Considered" bitfld.long 0x3C 11. " MSGVALC[3] ,MOVALC Message Valid 3" "Not considered,Considered" bitfld.long 0x3C 10. " MSGVALC[2] ,MOVALC Message Valid 2" "Not considered,Considered" textline " " bitfld.long 0x3C 9. " MSGVALC[1] ,MOVALC Message Valid 1" "Not considered,Considered" bitfld.long 0x3C 8. " MSGVALC[0] ,MOVALC Message Valid 0" "Not considered,Considered" bitfld.long 0x3C 7. " MSGVALB[3] ,MOVALB Message Valid 3" "Not considered,Considered" textline " " bitfld.long 0x3C 6. " MSGVALB[2] ,MOVALB Message Valid 2" "Not considered,Considered" bitfld.long 0x3C 5. " MSGVALB[1] ,MOVALB Message Valid 1" "Not considered,Considered" bitfld.long 0x3C 4. " MSGVALB[0] ,MOVALB Message Valid 0" "Not considered,Considered" textline " " bitfld.long 0x3C 3. " MSGVALA[3] ,MOVALA Message Valid 3" "Not considered,Considered" bitfld.long 0x3C 2. " MSGVALA[2] ,MOVALA Message Valid 2" "Not considered,Considered" bitfld.long 0x3C 1. " MSGVALA[1] ,MOVALA Message Valid 1" "Not considered,Considered" textline " " bitfld.long 0x3C 0. " MSGVALA[0] ,MOVALA Message Valid 0" "Not considered,Considered" line.long 0x40 "MOVALA,Message Valid A Register" bitfld.long 0x40 31. " MSGVAL[31] ,Message valid bit for Message Object 32" "Not considered,Considered" bitfld.long 0x40 30. " MSGVAL[30] ,Message valid bit for Message Object 31" "Not considered,Considered" bitfld.long 0x40 29. " MSGVAL[29] ,Message valid bit for Message Object 30" "Not considered,Considered" textline " " bitfld.long 0x40 28. " MSGVAL[28] ,Message valid bit for Message Object 29" "Not considered,Considered" bitfld.long 0x40 27. " MSGVAL[27] ,Message valid bit for Message Object 28" "Not considered,Considered" bitfld.long 0x40 26. " MSGVAL[26] ,Message valid bit for Message Object 27" "Not considered,Considered" textline " " bitfld.long 0x40 25. " MSGVAL[25] ,Message valid bit for Message Object 26" "Not considered,Considered" bitfld.long 0x40 24. " MSGVAL[24] ,Message valid bit for Message Object 25" "Not considered,Considered" bitfld.long 0x40 23. " MSGVAL[23] ,Message valid bit for Message Object 24" "Not considered,Considered" textline " " bitfld.long 0x40 22. " MSGVAL[22] ,Message valid bit for Message Object 23" "Not considered,Considered" bitfld.long 0x40 21. " MSGVAL[21] ,Message valid bit for Message Object 22" "Not considered,Considered" bitfld.long 0x40 20. " MSGVAL[20] ,Message valid bit for Message Object 21" "Not considered,Considered" textline " " bitfld.long 0x40 19. " MSGVAL[19] ,Message valid bit for Message Object 20" "Not considered,Considered" bitfld.long 0x40 18. " MSGVAL[18] ,Message valid bit for Message Object 19" "Not considered,Considered" bitfld.long 0x40 17. " MSGVAL[17] ,Message valid bit for Message Object 18" "Not considered,Considered" textline " " bitfld.long 0x40 16. " MSGVAL[16] ,Message valid bit for Message Object 17" "Not considered,Considered" bitfld.long 0x40 15. " MSGVAL[15] ,Message valid bit for Message Object 16" "Not considered,Considered" bitfld.long 0x40 14. " MSGVAL[14] ,Message valid bit for Message Object 15" "Not considered,Considered" textline " " bitfld.long 0x40 13. " MSGVAL[13] ,Message valid bit for Message Object 14" "Not considered,Considered" bitfld.long 0x40 12. " MSGVAL[12] ,Message valid bit for Message Object 13" "Not considered,Considered" bitfld.long 0x40 11. " MSGVAL[11] ,Message valid bit for Message Object 12" "Not considered,Considered" textline " " bitfld.long 0x40 10. " MSGVAL[10] ,Message valid bit for Message Object 11" "Not considered,Considered" bitfld.long 0x40 9. " MSGVAL[9] ,Message valid bit for Message Object 10" "Not considered,Considered" bitfld.long 0x40 8. " MSGVAL[8] ,Message valid bit for Message Object 9" "Not considered,Considered" textline " " bitfld.long 0x40 7. " MSGVAL[7] ,Message valid bit for Message Object 8" "Not considered,Considered" bitfld.long 0x40 6. " MSGVAL[6] ,Message valid bit for Message Object 7" "Not considered,Considered" bitfld.long 0x40 5. " MSGVAL[5] ,Message valid bit for Message Object 6" "Not considered,Considered" textline " " bitfld.long 0x40 4. " MSGVAL[4] ,Message valid bit for Message Object 5" "Not considered,Considered" bitfld.long 0x40 3. " MSGVAL[3] ,Message valid bit for Message Object 4" "Not considered,Considered" bitfld.long 0x40 2. " MSGVAL[2] ,Message valid bit for Message Object 3" "Not considered,Considered" textline " " bitfld.long 0x40 1. " MSGVAL[1] ,Message valid bit for Message Object 2" "Not considered,Considered" bitfld.long 0x40 0. " MSGVAL[0] ,Message valid bit for Message Object 1" "Not considered,Considered" line.long 0x44 "MOVALB,Message Valid B Register" bitfld.long 0x44 31. " MSGVAL[31] ,Message valid bit for Message Object 64" "Not considered,Considered" bitfld.long 0x44 30. " MSGVAL[30] ,Message valid bit for Message Object 63" "Not considered,Considered" bitfld.long 0x44 29. " MSGVAL[29] ,Message valid bit for Message Object 62" "Not considered,Considered" textline " " bitfld.long 0x44 28. " MSGVAL[28] ,Message valid bit for Message Object 61" "Not considered,Considered" bitfld.long 0x44 27. " MSGVAL[27] ,Message valid bit for Message Object 60" "Not considered,Considered" bitfld.long 0x44 26. " MSGVAL[26] ,Message valid bit for Message Object 59" "Not considered,Considered" textline " " bitfld.long 0x44 25. " MSGVAL[25] ,Message valid bit for Message Object 58" "Not considered,Considered" bitfld.long 0x44 24. " MSGVAL[24] ,Message valid bit for Message Object 57" "Not considered,Considered" bitfld.long 0x44 23. " MSGVAL[23] ,Message valid bit for Message Object 56" "Not considered,Considered" textline " " bitfld.long 0x44 22. " MSGVAL[22] ,Message valid bit for Message Object 55" "Not considered,Considered" bitfld.long 0x44 21. " MSGVAL[21] ,Message valid bit for Message Object 54" "Not considered,Considered" bitfld.long 0x44 20. " MSGVAL[20] ,Message valid bit for Message Object 53" "Not considered,Considered" textline " " bitfld.long 0x44 19. " MSGVAL[19] ,Message valid bit for Message Object 52" "Not considered,Considered" bitfld.long 0x44 18. " MSGVAL[18] ,Message valid bit for Message Object 51" "Not considered,Considered" bitfld.long 0x44 17. " MSGVAL[17] ,Message valid bit for Message Object 50" "Not considered,Considered" textline " " bitfld.long 0x44 16. " MSGVAL[16] ,Message valid bit for Message Object 49" "Not considered,Considered" bitfld.long 0x44 15. " MSGVAL[15] ,Message valid bit for Message Object 48" "Not considered,Considered" bitfld.long 0x44 14. " MSGVAL[14] ,Message valid bit for Message Object 47" "Not considered,Considered" textline " " bitfld.long 0x44 13. " MSGVAL[13] ,Message valid bit for Message Object 46" "Not considered,Considered" bitfld.long 0x44 12. " MSGVAL[12] ,Message valid bit for Message Object 45" "Not considered,Considered" bitfld.long 0x44 11. " MSGVAL[11] ,Message valid bit for Message Object 44" "Not considered,Considered" textline " " bitfld.long 0x44 10. " MSGVAL[10] ,Message valid bit for Message Object 43" "Not considered,Considered" bitfld.long 0x44 9. " MSGVAL[9] ,Message valid bit for Message Object 42" "Not considered,Considered" bitfld.long 0x44 8. " MSGVAL[8] ,Message valid bit for Message Object 41" "Not considered,Considered" textline " " bitfld.long 0x44 7. " MSGVAL[7] ,Message valid bit for Message Object 40" "Not considered,Considered" bitfld.long 0x44 6. " MSGVAL[6] ,Message valid bit for Message Object 39" "Not considered,Considered" bitfld.long 0x44 5. " MSGVAL[5] ,Message valid bit for Message Object 38" "Not considered,Considered" textline " " bitfld.long 0x44 4. " MSGVAL[4] ,Message valid bit for Message Object 37" "Not considered,Considered" bitfld.long 0x44 3. " MSGVAL[3] ,Message valid bit for Message Object 36" "Not considered,Considered" bitfld.long 0x44 2. " MSGVAL[2] ,Message valid bit for Message Object 35" "Not considered,Considered" textline " " bitfld.long 0x44 1. " MSGVAL[1] ,Message valid bit for Message Object 34" "Not considered,Considered" bitfld.long 0x44 0. " MSGVAL[0] ,Message valid bit for Message Object 33" "Not considered,Considered" line.long 0x48 "MOVALC,Message Valid C Register" bitfld.long 0x48 31. " MSGVAL[31] ,Message valid bit for Message Object 96" "Not considered,Considered" bitfld.long 0x48 30. " MSGVAL[30] ,Message valid bit for Message Object 95" "Not considered,Considered" bitfld.long 0x48 29. " MSGVAL[29] ,Message valid bit for Message Object 94" "Not considered,Considered" textline " " bitfld.long 0x48 28. " MSGVAL[28] ,Message valid bit for Message Object 93" "Not considered,Considered" bitfld.long 0x48 27. " MSGVAL[27] ,Message valid bit for Message Object 92" "Not considered,Considered" bitfld.long 0x48 26. " MSGVAL[26] ,Message valid bit for Message Object 91" "Not considered,Considered" textline " " bitfld.long 0x48 25. " MSGVAL[25] ,Message valid bit for Message Object 90" "Not considered,Considered" bitfld.long 0x48 24. " MSGVAL[24] ,Message valid bit for Message Object 89" "Not considered,Considered" bitfld.long 0x48 23. " MSGVAL[23] ,Message valid bit for Message Object 88" "Not considered,Considered" textline " " bitfld.long 0x48 22. " MSGVAL[22] ,Message valid bit for Message Object 87" "Not considered,Considered" bitfld.long 0x48 21. " MSGVAL[21] ,Message valid bit for Message Object 86" "Not considered,Considered" bitfld.long 0x48 20. " MSGVAL[20] ,Message valid bit for Message Object 85" "Not considered,Considered" textline " " bitfld.long 0x48 19. " MSGVAL[19] ,Message valid bit for Message Object 84" "Not considered,Considered" bitfld.long 0x48 18. " MSGVAL[18] ,Message valid bit for Message Object 83" "Not considered,Considered" bitfld.long 0x48 17. " MSGVAL[17] ,Message valid bit for Message Object 82" "Not considered,Considered" textline " " bitfld.long 0x48 16. " MSGVAL[16] ,Message valid bit for Message Object 81" "Not considered,Considered" bitfld.long 0x48 15. " MSGVAL[15] ,Message valid bit for Message Object 80" "Not considered,Considered" bitfld.long 0x48 14. " MSGVAL[14] ,Message valid bit for Message Object 79" "Not considered,Considered" textline " " bitfld.long 0x48 13. " MSGVAL[13] ,Message valid bit for Message Object 78" "Not considered,Considered" bitfld.long 0x48 12. " MSGVAL[12] ,Message valid bit for Message Object 77" "Not considered,Considered" bitfld.long 0x48 11. " MSGVAL[11] ,Message valid bit for Message Object 76" "Not considered,Considered" textline " " bitfld.long 0x48 10. " MSGVAL[10] ,Message valid bit for Message Object 75" "Not considered,Considered" bitfld.long 0x48 9. " MSGVAL[9] ,Message valid bit for Message Object 74" "Not considered,Considered" bitfld.long 0x48 8. " MSGVAL[8] ,Message valid bit for Message Object 73" "Not considered,Considered" textline " " bitfld.long 0x48 7. " MSGVAL[7] ,Message valid bit for Message Object 72" "Not considered,Considered" bitfld.long 0x48 6. " MSGVAL[6] ,Message valid bit for Message Object 71" "Not considered,Considered" bitfld.long 0x48 5. " MSGVAL[5] ,Message valid bit for Message Object 70" "Not considered,Considered" textline " " bitfld.long 0x48 4. " MSGVAL[4] ,Message valid bit for Message Object 69" "Not considered,Considered" bitfld.long 0x48 3. " MSGVAL[3] ,Message valid bit for Message Object 68" "Not considered,Considered" bitfld.long 0x48 2. " MSGVAL[2] ,Message valid bit for Message Object 67" "Not considered,Considered" textline " " bitfld.long 0x48 1. " MSGVAL[1] ,Message valid bit for Message Object 66" "Not considered,Considered" bitfld.long 0x48 0. " MSGVAL[0] ,Message valid bit for Message Object 65" "Not considered,Considered" line.long 0x4C "MOVALD,Message Valid D Register" bitfld.long 0x4C 31. " MSGVAL[31] ,Message valid bit for Message Object 128" "Not considered,Considered" bitfld.long 0x4C 30. " MSGVAL[30] ,Message valid bit for Message Object 127" "Not considered,Considered" bitfld.long 0x4C 29. " MSGVAL[29] ,Message valid bit for Message Object 126" "Not considered,Considered" textline " " bitfld.long 0x4C 28. " MSGVAL[28] ,Message valid bit for Message Object 125" "Not considered,Considered" bitfld.long 0x4C 27. " MSGVAL[27] ,Message valid bit for Message Object 124" "Not considered,Considered" bitfld.long 0x4C 26. " MSGVAL[26] ,Message valid bit for Message Object 123" "Not considered,Considered" textline " " bitfld.long 0x4C 25. " MSGVAL[25] ,Message valid bit for Message Object 122" "Not considered,Considered" bitfld.long 0x4C 24. " MSGVAL[24] ,Message valid bit for Message Object 121" "Not considered,Considered" bitfld.long 0x4C 23. " MSGVAL[23] ,Message valid bit for Message Object 120" "Not considered,Considered" textline " " bitfld.long 0x4C 22. " MSGVAL[22] ,Message valid bit for Message Object 119" "Not considered,Considered" bitfld.long 0x4C 21. " MSGVAL[21] ,Message valid bit for Message Object 118" "Not considered,Considered" bitfld.long 0x4C 20. " MSGVAL[20] ,Message valid bit for Message Object 117" "Not considered,Considered" textline " " bitfld.long 0x4C 19. " MSGVAL[19] ,Message valid bit for Message Object 116" "Not considered,Considered" bitfld.long 0x4C 18. " MSGVAL[18] ,Message valid bit for Message Object 115" "Not considered,Considered" bitfld.long 0x4C 17. " MSGVAL[17] ,Message valid bit for Message Object 114" "Not considered,Considered" textline " " bitfld.long 0x4C 16. " MSGVAL[16] ,Message valid bit for Message Object 113" "Not considered,Considered" bitfld.long 0x4C 15. " MSGVAL[15] ,Message valid bit for Message Object 112" "Not considered,Considered" bitfld.long 0x4C 14. " MSGVAL[14] ,Message valid bit for Message Object 111" "Not considered,Considered" textline " " bitfld.long 0x4C 13. " MSGVAL[13] ,Message valid bit for Message Object 110" "Not considered,Considered" bitfld.long 0x4C 12. " MSGVAL[12] ,Message valid bit for Message Object 109" "Not considered,Considered" bitfld.long 0x4C 11. " MSGVAL[11] ,Message valid bit for Message Object 108" "Not considered,Considered" textline " " bitfld.long 0x4C 10. " MSGVAL[10] ,Message valid bit for Message Object 107" "Not considered,Considered" bitfld.long 0x4C 9. " MSGVAL[9] ,Message valid bit for Message Object 106" "Not considered,Considered" bitfld.long 0x4C 8. " MSGVAL[8] ,Message valid bit for Message Object 105" "Not considered,Considered" textline " " bitfld.long 0x4C 7. " MSGVAL[7] ,Message valid bit for Message Object 104" "Not considered,Considered" bitfld.long 0x4C 6. " MSGVAL[6] ,Message valid bit for Message Object 103" "Not considered,Considered" bitfld.long 0x4C 5. " MSGVAL[5] ,Message valid bit for Message Object 102" "Not considered,Considered" textline " " bitfld.long 0x4C 4. " MSGVAL[4] ,Message valid bit for Message Object 101" "Not considered,Considered" bitfld.long 0x4C 3. " MSGVAL[3] ,Message valid bit for Message Object 100" "Not considered,Considered" bitfld.long 0x4C 2. " MSGVAL[2] ,Message valid bit for Message Object 99" "Not considered,Considered" textline " " bitfld.long 0x4C 1. " MSGVAL[1] ,Message valid bit for Message Object 98" "Not considered,Considered" bitfld.long 0x4C 0. " MSGVAL[0] ,Message valid bit for Message Object 97" "Not considered,Considered" tree.end tree "Message Interface Group" hgroup.long 0x100++0x3 hide.long 0x00 "IF1CMR,IF1 Command Register" in group.long (0x100+0x4)++0x13 line.long 0x00 "IF1MSK,IF1 Mask Register" bitfld.long 0x00 31. " MXTD ,Mask Extended Identifier" "Not accepted,Accepted" bitfld.long 0x00 30. " MDIR ,Mask Message Direction" "Not accepted,Accepted" bitfld.long 0x00 28. " MSK28 ,Identifier Mask 28" "Masked,Not masked" textline " " bitfld.long 0x00 27. " MSK27 ,Identifier Mask 27" "Masked,Not masked" bitfld.long 0x00 26. " MSK26 ,Identifier Mask 26" "Masked,Not masked" bitfld.long 0x00 25. " MSK25 ,Identifier Mask 25" "Masked,Not masked" textline " " bitfld.long 0x00 24. " MSK24 ,Identifier Mask 24" "Masked,Not masked" bitfld.long 0x00 23. " MSK23 ,Identifier Mask 23" "Masked,Not masked" bitfld.long 0x00 22. " MSK22 ,Identifier Mask 22" "Masked,Not masked" textline " " bitfld.long 0x00 21. " MSK21 ,Identifier Mask 21" "Masked,Not masked" bitfld.long 0x00 20. " MSK20 ,Identifier Mask 20" "Masked,Not masked" bitfld.long 0x00 19. " MSK19 ,Identifier Mask 19" "Masked,Not masked" textline " " bitfld.long 0x00 18. " MSK18 ,Identifier Mask 18" "Masked,Not masked" bitfld.long 0x00 17. " MSK17 ,Identifier Mask 17" "Masked,Not masked" bitfld.long 0x00 16. " MSK16 ,Identifier Mask 16" "Masked,Not masked" textline " " bitfld.long 0x00 15. " MSK15 ,Identifier Mask 15" "Masked,Not masked" bitfld.long 0x00 14. " MSK14 ,Identifier Mask 14" "Masked,Not masked" bitfld.long 0x00 13. " MSK13 ,Identifier Mask 13" "Masked,Not masked" textline " " bitfld.long 0x00 12. " MSK12 ,Identifier Mask 12" "Masked,Not masked" bitfld.long 0x00 11. " MSK11 ,Identifier Mask 11" "Masked,Not masked" bitfld.long 0x00 10. " MSK10 ,Identifier Mask 10" "Masked,Not masked" textline " " bitfld.long 0x00 9. " MSK9 ,Identifier Mask 9" "Masked,Not masked" bitfld.long 0x00 8. " MSK8 ,Identifier Mask 8" "Masked,Not masked" bitfld.long 0x00 7. " MSK7 ,Identifier Mask 7" "Masked,Not masked" textline " " bitfld.long 0x00 6. " MSK6 ,Identifier Mask 6" "Masked,Not masked" bitfld.long 0x00 5. " MSK5 ,Identifier Mask 5" "Masked,Not masked" bitfld.long 0x00 4. " MSK4 ,Identifier Mask 4" "Masked,Not masked" textline " " bitfld.long 0x00 3. " MSK3 ,Identifier Mask 3" "Masked,Not masked" bitfld.long 0x00 2. " MSK2 ,Identifier Mask 2" "Masked,Not masked" bitfld.long 0x00 1. " MSK1 ,Identifier Mask 1" "Masked,Not masked" textline " " bitfld.long 0x00 0. " MSK0 ,Identifier Mask 0" "Masked,Not masked" line.long 0x04 "IF1ARB,IF1 Arbitration Register" bitfld.long 0x04 31. " MSGVAL ,Message Valid" "Not considered,Considered" bitfld.long 0x04 30. " XTD ,Extended Identifier" "Standard,Extended" bitfld.long 0x04 29. " DIR ,Message Direction" "Rx,Tx" textline " " hexmask.long 0x04 0.--28. 1. " ID ,Identifier Mask" line.long 0x08 "IF1MCTR,IF1 Message Control Register" bitfld.long 0x08 15. " NEWDAT ,New Data" "Not written,Written" bitfld.long 0x08 14. " MSGLST ,Message Lost" "Not lost,Lost" bitfld.long 0x08 13. " INTPND ,Interrupt Pending" "Not source,Source" textline " " bitfld.long 0x08 12. " UMASK ,Use Acceptance Mask" "Not used,Used" bitfld.long 0x08 11. " TXIE ,Transmit Interrupt Enable" "Disabled,Enabled" bitfld.long 0x08 10. " RXIE ,Receive Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 9. " RMTEN ,Remote Enable" "Disabled,Enabled" bitfld.long 0x08 8. " TXRQST ,Transmit Request" "Not requested,Requested" bitfld.long 0x08 7. " EOB ,End Of Block" "Not last,Last" textline " " bitfld.long 0x08 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,8,8,8,8,8,8,8" line.long 0x0C "IF1DA,IF1 Data A Register" hexmask.long.byte 0x0C 24.--31. 1. " DATA3 ,Data3" hexmask.long.byte 0x0C 16.--23. 1. " DATA2 ,Data2" hexmask.long.byte 0x0C 8.--15. 1. " DATA1 ,Data1" textline " " hexmask.long.byte 0x0C 0.--7. 1. " DATA0 ,Data0" line.long 0x10 "IF1DB,IF1 Data B Register" hexmask.long.byte 0x10 24.--31. 1. " DATA3 ,Data7" hexmask.long.byte 0x10 16.--23. 1. " DATA2 ,Data6" hexmask.long.byte 0x10 8.--15. 1. " DATA1 ,Data5" textline " " hexmask.long.byte 0x10 0.--7. 1. " DATA0 ,Data4" hgroup.long 0x120++0x3 hide.long 0x00 "IF2CMR,IF2 Command Register" in group.long (0x120+0x4)++0x13 line.long 0x00 "IF2MSK,IF2 Mask Register" bitfld.long 0x00 31. " MXTD ,Mask Extended Identifier" "Not accepted,Accepted" bitfld.long 0x00 30. " MDIR ,Mask Message Direction" "Not accepted,Accepted" bitfld.long 0x00 28. " MSK28 ,Identifier Mask 28" "Masked,Not masked" textline " " bitfld.long 0x00 27. " MSK27 ,Identifier Mask 27" "Masked,Not masked" bitfld.long 0x00 26. " MSK26 ,Identifier Mask 26" "Masked,Not masked" bitfld.long 0x00 25. " MSK25 ,Identifier Mask 25" "Masked,Not masked" textline " " bitfld.long 0x00 24. " MSK24 ,Identifier Mask 24" "Masked,Not masked" bitfld.long 0x00 23. " MSK23 ,Identifier Mask 23" "Masked,Not masked" bitfld.long 0x00 22. " MSK22 ,Identifier Mask 22" "Masked,Not masked" textline " " bitfld.long 0x00 21. " MSK21 ,Identifier Mask 21" "Masked,Not masked" bitfld.long 0x00 20. " MSK20 ,Identifier Mask 20" "Masked,Not masked" bitfld.long 0x00 19. " MSK19 ,Identifier Mask 19" "Masked,Not masked" textline " " bitfld.long 0x00 18. " MSK18 ,Identifier Mask 18" "Masked,Not masked" bitfld.long 0x00 17. " MSK17 ,Identifier Mask 17" "Masked,Not masked" bitfld.long 0x00 16. " MSK16 ,Identifier Mask 16" "Masked,Not masked" textline " " bitfld.long 0x00 15. " MSK15 ,Identifier Mask 15" "Masked,Not masked" bitfld.long 0x00 14. " MSK14 ,Identifier Mask 14" "Masked,Not masked" bitfld.long 0x00 13. " MSK13 ,Identifier Mask 13" "Masked,Not masked" textline " " bitfld.long 0x00 12. " MSK12 ,Identifier Mask 12" "Masked,Not masked" bitfld.long 0x00 11. " MSK11 ,Identifier Mask 11" "Masked,Not masked" bitfld.long 0x00 10. " MSK10 ,Identifier Mask 10" "Masked,Not masked" textline " " bitfld.long 0x00 9. " MSK9 ,Identifier Mask 9" "Masked,Not masked" bitfld.long 0x00 8. " MSK8 ,Identifier Mask 8" "Masked,Not masked" bitfld.long 0x00 7. " MSK7 ,Identifier Mask 7" "Masked,Not masked" textline " " bitfld.long 0x00 6. " MSK6 ,Identifier Mask 6" "Masked,Not masked" bitfld.long 0x00 5. " MSK5 ,Identifier Mask 5" "Masked,Not masked" bitfld.long 0x00 4. " MSK4 ,Identifier Mask 4" "Masked,Not masked" textline " " bitfld.long 0x00 3. " MSK3 ,Identifier Mask 3" "Masked,Not masked" bitfld.long 0x00 2. " MSK2 ,Identifier Mask 2" "Masked,Not masked" bitfld.long 0x00 1. " MSK1 ,Identifier Mask 1" "Masked,Not masked" textline " " bitfld.long 0x00 0. " MSK0 ,Identifier Mask 0" "Masked,Not masked" line.long 0x04 "IF2ARB,IF2 Arbitration Register" bitfld.long 0x04 31. " MSGVAL ,Message Valid" "Not considered,Considered" bitfld.long 0x04 30. " XTD ,Extended Identifier" "Standard,Extended" bitfld.long 0x04 29. " DIR ,Message Direction" "Rx,Tx" textline " " hexmask.long 0x04 0.--28. 1. " ID ,Identifier Mask" line.long 0x08 "IF2MCTR,IF2 Message Control Register" bitfld.long 0x08 15. " NEWDAT ,New Data" "Not written,Written" bitfld.long 0x08 14. " MSGLST ,Message Lost" "Not lost,Lost" bitfld.long 0x08 13. " INTPND ,Interrupt Pending" "Not source,Source" textline " " bitfld.long 0x08 12. " UMASK ,Use Acceptance Mask" "Not used,Used" bitfld.long 0x08 11. " TXIE ,Transmit Interrupt Enable" "Disabled,Enabled" bitfld.long 0x08 10. " RXIE ,Receive Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 9. " RMTEN ,Remote Enable" "Disabled,Enabled" bitfld.long 0x08 8. " TXRQST ,Transmit Request" "Not requested,Requested" bitfld.long 0x08 7. " EOB ,End Of Block" "Not last,Last" textline " " bitfld.long 0x08 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,8,8,8,8,8,8,8" line.long 0x0C "IF2DA,IF2 Data A Register" hexmask.long.byte 0x0C 24.--31. 1. " DATA3 ,Data3" hexmask.long.byte 0x0C 16.--23. 1. " DATA2 ,Data2" hexmask.long.byte 0x0C 8.--15. 1. " DATA1 ,Data1" textline " " hexmask.long.byte 0x0C 0.--7. 1. " DATA0 ,Data0" line.long 0x10 "IF2DB,IF2 Data B Register" hexmask.long.byte 0x10 24.--31. 1. " DATA3 ,Data7" hexmask.long.byte 0x10 16.--23. 1. " DATA2 ,Data6" hexmask.long.byte 0x10 8.--15. 1. " DATA1 ,Data5" textline " " hexmask.long.byte 0x10 0.--7. 1. " DATA0 ,Data4" tree.end width 0xB tree.end tree.end tree.open "UART (UART Module)" tree "UART 0" base ad:0xFFC02000 width 8. if (d.l(ad:0xFFC02000+0x0C)&0x80)==0x80 group.long 0x00++0x03 line.long 0x00 "DLL,Divisor Latch Low Register" hexmask.long.byte 0x00 0.--7. 1. " DLL ,Divisor Latch Low Value" group.long 0x04++0x03 line.long 0x00 "DLH,Divisor Latch High Register" hexmask.long.byte 0x00 0.--7. 1. " DLH ,Divisor Latch High Value" else hgroup.long 0x00++0x03 hide.long 0x00 "RBR,Receive Buffer Register" in wgroup.long 0x00++0x03 line.long 0x00 "THR,Transmit Holding Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" group.long 0x04++0x03 line.long 0x00 "IER,Interrupt Enable Register" bitfld.long 0x00 7. " PTIME ,PTIME THRE Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. " EDSSI ,Modem Status Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. " ELSI ,Receiver Line Status Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " ETBEI ,Transmitter Holding Register Empty Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. " ERBFI ,Receive Data Available Interrupt Enable" "Disabled,Enabled" endif rgroup.long 0x08++0x03 line.long 0x00 "IRR,Interrupt Identification Register (when read)" bitfld.long 0x00 6.--7. " FIFOEN ,FIFO Enabled" "Disabled,,,Enabled" bitfld.long 0x00 0.--3. " ID ,Interrupt ID" "Modem status,No interrupt,THR empty,,Receive data available,,Receive line status,,,,,,Character timeout,?..." wgroup.long 0x08++0x03 line.long 0x00 "FCR,FIFO Control (when written)" bitfld.long 0x00 6.--7. " RT ,Rx Trigger Level" "One character,1/4 full,1/2 full,Less than full" bitfld.long 0x00 4.--5. " TET ,Tx Empty Trigger Level" "Empty,Two characters,1/4 full,1/2 full" bitfld.long 0x00 3. " DMAM ,DMA Mode" "Single transfer,Multiple transfer" textline " " bitfld.long 0x00 2. " XFIFOR ,Tx FIFO Reset" "No reset,Reset" bitfld.long 0x00 1. " RFIFOR ,Rx FIFO Reset" "No reset,Reset" bitfld.long 0x00 0. " FIFOE ,FIFO Enable" "Disable,Enable" if (d.l(ad:0xFFC02000+0x0C)&0x03)==0x00 group.long 0x0C++0x03 line.long 0x00 "LCR,Line Control Register (When Written)" bitfld.long 0x00 7. " DLAB ,Divisor Latch Access Bit" "Disabled,Enabled" bitfld.long 0x00 6. " BREAK ,Break Control Bit" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " SP ,Stick Parity" "Disabled,Enabled" textline " " endif bitfld.long 0x00 4. " EPS ,Even Parity Select" "Odd,Even" bitfld.long 0x00 3. " PEN ,Parity Enable" "Disabled,Enabled" bitfld.long 0x00 2. " STOP ,Stop Bits" "1 bit,1.5 bits" textline " " bitfld.long 0x00 0.--1. " DLS ,Data Length Select" "5 bits,6 bits,7 bits,8 bits" else group.long 0x0C++0x03 line.long 0x00 "LCR,Line Control Register (When Written)" bitfld.long 0x00 7. " DLAB ,Divisor Latch Access Bit" "Disabled,Enabled" bitfld.long 0x00 6. " BREAK ,Break Control Bit" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " SP ,Stick Parity" "Disabled,Enabled" textline " " endif bitfld.long 0x00 4. " EPS ,Even Parity Select" "Odd,Even" bitfld.long 0x00 3. " PEN ,Parity Enable" "Disabled,Enabled" bitfld.long 0x00 2. " STOP ,Stop Bits" "1 bit,2 bits" textline " " bitfld.long 0x00 0.--1. " DLS ,Data Length Select" "5 bits,6 bits,7 bits,8 bits" endif group.long 0x10++0x03 line.long 0x00 "MCR,Modem Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 6. " SIRE ,SIR Mode Enable" "Disabled,Enabled" textline " " endif bitfld.long 0x00 5. " AFCE ,Auto Flow Control Enable" "Disabled,Enabled" bitfld.long 0x00 4. " LOOPBACK ,LoopBack Bit" "No loopback,Loopback" bitfld.long 0x00 3. " OUT2 ,Out2" "1,0" textline " " bitfld.long 0x00 2. " OUT1 ,Out1" "1,0" bitfld.long 0x00 1. " RTS ,Request to Send" "1,0" bitfld.long 0x00 0. " DTR ,Data Terminal Ready" "1,0" rgroup.long 0x14++0x07 line.long 0x00 "LSR,Line Status Register" bitfld.long 0x00 7. " RFE ,Receiver FIFO Error bit" "No error,Error" bitfld.long 0x00 6. " TEMT ,Transmitter Empty bit" "Not empty,Empty" bitfld.long 0x00 5. " THRE ,Transmit Holding Register Empty bit" "Not empty,Empty" textline " " bitfld.long 0x00 4. " BI ,Break Interrupt" "Not detected,Detected" bitfld.long 0x00 3. " FE ,Framing Error" "No error,Error" bitfld.long 0x00 2. " PE ,Parity Error" "No error,Error" textline " " bitfld.long 0x00 1. " OE ,Overrun error" "No error,Error" bitfld.long 0x00 0. " DR ,Data Ready bit" "Not ready,Ready" line.long 0x04 "MSR,Modem Status Register" bitfld.long 0x04 7. " DCD ,Data Carrier Detect" "Not asserted,Asserted" bitfld.long 0x04 6. " RI ,Ring Indicator" "Not asserted,Asserted" bitfld.long 0x04 5. " DSR ,Data Set Ready" "Not asserted,Asserted" textline " " bitfld.long 0x04 4. " CTS ,Clear to Send" "Not asserted,Asserted" bitfld.long 0x04 3. " DDCD ,Delta Data Carrier Detect" "Not changed,Changed" bitfld.long 0x04 2. " TERI ,Trailing Edge of Ring Indicator" "Not changed,Changed" textline " " bitfld.long 0x04 1. " DDSR ,Delta Data Set Ready" "Not changed,Changed" bitfld.long 0x04 0. " DCTS ,Delta Clear to Send" "Not changed,Changed" group.long 0x1C++0x03 line.long 0x00 "SCR,Scratchpad Register" hexmask.long.byte 0x00 0.--7. 1. " SCR ,Scratchpad Register" width 8. sif cpu()=="ARRIA10SOC" hgroup.long 0x30++0x03 hide.long 0x00 "SRBR0,Shadow Receive Buffer Register 0" in hgroup.long 0x34++0x03 hide.long 0x00 "SRBR1,Shadow Receive Buffer Register 1" in hgroup.long 0x38++0x03 hide.long 0x00 "SRBR2,Shadow Receive Buffer Register 2" in hgroup.long 0x3C++0x03 hide.long 0x00 "SRBR3,Shadow Receive Buffer Register 3" in hgroup.long 0x40++0x03 hide.long 0x00 "SRBR4,Shadow Receive Buffer Register 4" in hgroup.long 0x44++0x03 hide.long 0x00 "SRBR5,Shadow Receive Buffer Register 5" in hgroup.long 0x48++0x03 hide.long 0x00 "SRBR6,Shadow Receive Buffer Register 6" in hgroup.long 0x4C++0x03 hide.long 0x00 "SRBR7,Shadow Receive Buffer Register 7" in hgroup.long 0x50++0x03 hide.long 0x00 "SRBR8,Shadow Receive Buffer Register 8" in hgroup.long 0x54++0x03 hide.long 0x00 "SRBR9,Shadow Receive Buffer Register 9" in hgroup.long 0x58++0x03 hide.long 0x00 "SRBR10,Shadow Receive Buffer Register 10" in hgroup.long 0x5C++0x03 hide.long 0x00 "SRBR11,Shadow Receive Buffer Register 11" in hgroup.long 0x60++0x03 hide.long 0x00 "SRBR12,Shadow Receive Buffer Register 12" in hgroup.long 0x64++0x03 hide.long 0x00 "SRBR13,Shadow Receive Buffer Register 13" in hgroup.long 0x68++0x03 hide.long 0x00 "SRBR14,Shadow Receive Buffer Register 14" in hgroup.long 0x6C++0x03 hide.long 0x00 "SRBR15,Shadow Receive Buffer Register 15" in wgroup.long 0x30++0x03 line.long 0x00 "STHR0,Shadow Transmit Holding Register 0" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x34++0x03 line.long 0x00 "STHR1,Shadow Transmit Holding Register 1" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x38++0x03 line.long 0x00 "STHR2,Shadow Transmit Holding Register 2" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x3C++0x03 line.long 0x00 "STHR3,Shadow Transmit Holding Register 3" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x40++0x03 line.long 0x00 "STHR4,Shadow Transmit Holding Register 4" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x44++0x03 line.long 0x00 "STHR5,Shadow Transmit Holding Register 5" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x48++0x03 line.long 0x00 "STHR6,Shadow Transmit Holding Register 6" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x4C++0x03 line.long 0x00 "STHR7,Shadow Transmit Holding Register 7" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x50++0x03 line.long 0x00 "STHR8,Shadow Transmit Holding Register 8" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x54++0x03 line.long 0x00 "STHR9,Shadow Transmit Holding Register 9" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x58++0x03 line.long 0x00 "STHR10,Shadow Transmit Holding Register 10" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x5C++0x03 line.long 0x00 "STHR11,Shadow Transmit Holding Register 11" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x60++0x03 line.long 0x00 "STHR12,Shadow Transmit Holding Register 12" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x64++0x03 line.long 0x00 "STHR13,Shadow Transmit Holding Register 13" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x68++0x03 line.long 0x00 "STHR14,Shadow Transmit Holding Register 14" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x6C++0x03 line.long 0x00 "STHR15,Shadow Transmit Holding Register 15" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" else hgroup.long 0x30++0x03 hide.long 0x00 "SRBR,Shadow Receive Buffer Register" in wgroup.long 0x34++0x03 line.long 0x00 "STHR,Shadow Transmit Buffer Register" hexmask.long.byte 0x00 0.--7. 1. " STHR ,Shadow Transmit Buffer" endif group.long 0x70++0x03 line.long 0x00 "FAR,FIFO Access Register" bitfld.long 0x00 0. " SRBR_STHR ,FIFO Access Bit" "Disabled,Enabled" hgroup.long 0x74++0x03 hide.long 0x00 "TFR,Transmit FIFO Read Register" in wgroup.long 0x78++0x03 line.long 0x00 "RFW,Receive FIFO Write" bitfld.long 0x00 9. " RFFE ,Receive FIFO Framing Error" "No error,Error" bitfld.long 0x00 8. " RFPE ,Receive FIFO Parity Error" "No error,Error" hexmask.long.byte 0x00 0.--7. 1. " RFWD ,Receive FIFO Write Data" rgroup.long 0x7C++0x0B line.long 0x00 "USR,UART Status Register" bitfld.long 0x00 4. " RFF ,Receive FIFO Full" "Not full,Full" bitfld.long 0x00 3. " RFNE ,Receive FIFO Not Empty" "No,Yes" bitfld.long 0x00 2. " TFE ,Transmit FIFO Empty" "Not empty,Empty" textline " " bitfld.long 0x00 1. " TFNF ,Transmit FIFO Not Full" "No,Yes" sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0. " RSVD_BUSY ,UART Busy" "Not busy,Busy" endif line.long 0x04 "TFL,Transmit FIFO Level" bitfld.long 0x04 0.--4. " TFL ,Transmit FIFO Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" line.long 0x08 "RFL,Receive FIFO Level Write" bitfld.long 0x08 0.--4. " RFL ,Receive FIFO Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" wgroup.long 0x88++0x03 line.long 0x00 "SRR,Software Reset Register" bitfld.long 0x00 2. " XFR ,Tx FIFO Reset" "No reset,Reset" bitfld.long 0x00 1. " RFR ,Rx FIFO Reset" "No reset,Reset" bitfld.long 0x00 0. " UR ,UART Reset" "No reset,Reset" group.long 0x8C++0x1B line.long 0x00 "SRTS,Shadow Request to Send" bitfld.long 0x00 0. " SRTS ,Shadow Request to Send" "Logic 1,Logic 0" line.long 0x04 "SBCR,Shadow Break Control Register" bitfld.long 0x04 0. " SBCR ,Shadow Break Control" "Disabled,Enabled" line.long 0x08 "SDMAM,Shadow DMA Mode" bitfld.long 0x08 0. " SDMAM ,Shadow DMA Mode" "Single transfer,Multiple transfer" line.long 0x0C "SFE,Shadow FIFO Enable" bitfld.long 0x0C 0. " SFE ,Shadow FIFO Enable" "Disabled,Enabled" line.long 0x10 "SRT,Shadow Rx Trigger" bitfld.long 0x10 0.--1. " SRT ,Shadow Rx Trigger Bits" "One character,1/4 full,1/2 full,Less than full" line.long 0x14 "STET,Shadow Tx Empty Trigger" bitfld.long 0x14 0.--1. " STET ,Shadow Tx Empty Trigger Bits" "Empty,Two characters,1/4 full,1/2 full" line.long 0x18 "HTX,Halt Tx" bitfld.long 0x18 0. " HTX ,Halt Tx Bits" "Disabled,Enabled" wgroup.long 0xA8++0x03 line.long 0x00 "DMASA,DMA Software Acknowledge" bitfld.long 0x00 0. " DMASA ,DMA Software Acknowledge Bits" "No effect,Acknowledge" width 8. rgroup.long 0xF4++0x0B line.long 0x00 "CPR,Component Parameter Register" hexmask.long.byte 0x00 16.--23. 1. " FIFO_MODE ,FIFO Depth" bitfld.long 0x00 13. " DMA_EXTRA ,DMA EXTRA Support" "Disabled,Enabled" bitfld.long 0x00 12. " UART_ADD_ENCODED_PARAM ,Configuration ID Register Present" "Disabled,Enabled" textline " " bitfld.long 0x00 11. " SHADOW ,SHADOW Support" "Disabled,Enabled" bitfld.long 0x00 10. " FIFO_STAT ,FIFO STAT Support" "Disabled,Enabled" bitfld.long 0x00 9. " FIFO_ACCESS ,FIFO ACCESS Support" "Disabled,Enabled" textline " " bitfld.long 0x00 8. " ADDITIONAL_FEAT ,ADDITIONAL FEATURES Support" "Disabled,Enabled" bitfld.long 0x00 7. " SIR_LP_MODE ,SIR LP MODE Support" "Disabled,Enabled" bitfld.long 0x00 6. " SIR_MODE ,SIR MODE Support" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " THRE_MODE ,THRE MODE Support" "Disabled,Enabled" bitfld.long 0x00 4. " AFCE_MODE ,Auto Flow Control Support" "Disabled,Enabled" bitfld.long 0x00 0.--1. " APBDATAWIDTH ,APB data width" ",,32-bits,?..." line.long 0x04 "UCV,Component Version" line.long 0x08 "CTR,Component Type Register" width 0x0B tree.end tree "UART 1" base ad:0xFFC03000 width 8. if (d.l(ad:0xFFC03000+0x0C)&0x80)==0x80 group.long 0x00++0x03 line.long 0x00 "DLL,Divisor Latch Low Register" hexmask.long.byte 0x00 0.--7. 1. " DLL ,Divisor Latch Low Value" group.long 0x04++0x03 line.long 0x00 "DLH,Divisor Latch High Register" hexmask.long.byte 0x00 0.--7. 1. " DLH ,Divisor Latch High Value" else hgroup.long 0x00++0x03 hide.long 0x00 "RBR,Receive Buffer Register" in wgroup.long 0x00++0x03 line.long 0x00 "THR,Transmit Holding Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" group.long 0x04++0x03 line.long 0x00 "IER,Interrupt Enable Register" bitfld.long 0x00 7. " PTIME ,PTIME THRE Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. " EDSSI ,Modem Status Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 2. " ELSI ,Receiver Line Status Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " ETBEI ,Transmitter Holding Register Empty Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. " ERBFI ,Receive Data Available Interrupt Enable" "Disabled,Enabled" endif rgroup.long 0x08++0x03 line.long 0x00 "IRR,Interrupt Identification Register (when read)" bitfld.long 0x00 6.--7. " FIFOEN ,FIFO Enabled" "Disabled,,,Enabled" bitfld.long 0x00 0.--3. " ID ,Interrupt ID" "Modem status,No interrupt,THR empty,,Receive data available,,Receive line status,,,,,,Character timeout,?..." wgroup.long 0x08++0x03 line.long 0x00 "FCR,FIFO Control (when written)" bitfld.long 0x00 6.--7. " RT ,Rx Trigger Level" "One character,1/4 full,1/2 full,Less than full" bitfld.long 0x00 4.--5. " TET ,Tx Empty Trigger Level" "Empty,Two characters,1/4 full,1/2 full" bitfld.long 0x00 3. " DMAM ,DMA Mode" "Single transfer,Multiple transfer" textline " " bitfld.long 0x00 2. " XFIFOR ,Tx FIFO Reset" "No reset,Reset" bitfld.long 0x00 1. " RFIFOR ,Rx FIFO Reset" "No reset,Reset" bitfld.long 0x00 0. " FIFOE ,FIFO Enable" "Disable,Enable" if (d.l(ad:0xFFC03000+0x0C)&0x03)==0x00 group.long 0x0C++0x03 line.long 0x00 "LCR,Line Control Register (When Written)" bitfld.long 0x00 7. " DLAB ,Divisor Latch Access Bit" "Disabled,Enabled" bitfld.long 0x00 6. " BREAK ,Break Control Bit" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " SP ,Stick Parity" "Disabled,Enabled" textline " " endif bitfld.long 0x00 4. " EPS ,Even Parity Select" "Odd,Even" bitfld.long 0x00 3. " PEN ,Parity Enable" "Disabled,Enabled" bitfld.long 0x00 2. " STOP ,Stop Bits" "1 bit,1.5 bits" textline " " bitfld.long 0x00 0.--1. " DLS ,Data Length Select" "5 bits,6 bits,7 bits,8 bits" else group.long 0x0C++0x03 line.long 0x00 "LCR,Line Control Register (When Written)" bitfld.long 0x00 7. " DLAB ,Divisor Latch Access Bit" "Disabled,Enabled" bitfld.long 0x00 6. " BREAK ,Break Control Bit" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " SP ,Stick Parity" "Disabled,Enabled" textline " " endif bitfld.long 0x00 4. " EPS ,Even Parity Select" "Odd,Even" bitfld.long 0x00 3. " PEN ,Parity Enable" "Disabled,Enabled" bitfld.long 0x00 2. " STOP ,Stop Bits" "1 bit,2 bits" textline " " bitfld.long 0x00 0.--1. " DLS ,Data Length Select" "5 bits,6 bits,7 bits,8 bits" endif group.long 0x10++0x03 line.long 0x00 "MCR,Modem Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 6. " SIRE ,SIR Mode Enable" "Disabled,Enabled" textline " " endif bitfld.long 0x00 5. " AFCE ,Auto Flow Control Enable" "Disabled,Enabled" bitfld.long 0x00 4. " LOOPBACK ,LoopBack Bit" "No loopback,Loopback" bitfld.long 0x00 3. " OUT2 ,Out2" "1,0" textline " " bitfld.long 0x00 2. " OUT1 ,Out1" "1,0" bitfld.long 0x00 1. " RTS ,Request to Send" "1,0" bitfld.long 0x00 0. " DTR ,Data Terminal Ready" "1,0" rgroup.long 0x14++0x07 line.long 0x00 "LSR,Line Status Register" bitfld.long 0x00 7. " RFE ,Receiver FIFO Error bit" "No error,Error" bitfld.long 0x00 6. " TEMT ,Transmitter Empty bit" "Not empty,Empty" bitfld.long 0x00 5. " THRE ,Transmit Holding Register Empty bit" "Not empty,Empty" textline " " bitfld.long 0x00 4. " BI ,Break Interrupt" "Not detected,Detected" bitfld.long 0x00 3. " FE ,Framing Error" "No error,Error" bitfld.long 0x00 2. " PE ,Parity Error" "No error,Error" textline " " bitfld.long 0x00 1. " OE ,Overrun error" "No error,Error" bitfld.long 0x00 0. " DR ,Data Ready bit" "Not ready,Ready" line.long 0x04 "MSR,Modem Status Register" bitfld.long 0x04 7. " DCD ,Data Carrier Detect" "Not asserted,Asserted" bitfld.long 0x04 6. " RI ,Ring Indicator" "Not asserted,Asserted" bitfld.long 0x04 5. " DSR ,Data Set Ready" "Not asserted,Asserted" textline " " bitfld.long 0x04 4. " CTS ,Clear to Send" "Not asserted,Asserted" bitfld.long 0x04 3. " DDCD ,Delta Data Carrier Detect" "Not changed,Changed" bitfld.long 0x04 2. " TERI ,Trailing Edge of Ring Indicator" "Not changed,Changed" textline " " bitfld.long 0x04 1. " DDSR ,Delta Data Set Ready" "Not changed,Changed" bitfld.long 0x04 0. " DCTS ,Delta Clear to Send" "Not changed,Changed" group.long 0x1C++0x03 line.long 0x00 "SCR,Scratchpad Register" hexmask.long.byte 0x00 0.--7. 1. " SCR ,Scratchpad Register" width 8. sif cpu()=="ARRIA10SOC" hgroup.long 0x30++0x03 hide.long 0x00 "SRBR0,Shadow Receive Buffer Register 0" in hgroup.long 0x34++0x03 hide.long 0x00 "SRBR1,Shadow Receive Buffer Register 1" in hgroup.long 0x38++0x03 hide.long 0x00 "SRBR2,Shadow Receive Buffer Register 2" in hgroup.long 0x3C++0x03 hide.long 0x00 "SRBR3,Shadow Receive Buffer Register 3" in hgroup.long 0x40++0x03 hide.long 0x00 "SRBR4,Shadow Receive Buffer Register 4" in hgroup.long 0x44++0x03 hide.long 0x00 "SRBR5,Shadow Receive Buffer Register 5" in hgroup.long 0x48++0x03 hide.long 0x00 "SRBR6,Shadow Receive Buffer Register 6" in hgroup.long 0x4C++0x03 hide.long 0x00 "SRBR7,Shadow Receive Buffer Register 7" in hgroup.long 0x50++0x03 hide.long 0x00 "SRBR8,Shadow Receive Buffer Register 8" in hgroup.long 0x54++0x03 hide.long 0x00 "SRBR9,Shadow Receive Buffer Register 9" in hgroup.long 0x58++0x03 hide.long 0x00 "SRBR10,Shadow Receive Buffer Register 10" in hgroup.long 0x5C++0x03 hide.long 0x00 "SRBR11,Shadow Receive Buffer Register 11" in hgroup.long 0x60++0x03 hide.long 0x00 "SRBR12,Shadow Receive Buffer Register 12" in hgroup.long 0x64++0x03 hide.long 0x00 "SRBR13,Shadow Receive Buffer Register 13" in hgroup.long 0x68++0x03 hide.long 0x00 "SRBR14,Shadow Receive Buffer Register 14" in hgroup.long 0x6C++0x03 hide.long 0x00 "SRBR15,Shadow Receive Buffer Register 15" in wgroup.long 0x30++0x03 line.long 0x00 "STHR0,Shadow Transmit Holding Register 0" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x34++0x03 line.long 0x00 "STHR1,Shadow Transmit Holding Register 1" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x38++0x03 line.long 0x00 "STHR2,Shadow Transmit Holding Register 2" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x3C++0x03 line.long 0x00 "STHR3,Shadow Transmit Holding Register 3" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x40++0x03 line.long 0x00 "STHR4,Shadow Transmit Holding Register 4" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x44++0x03 line.long 0x00 "STHR5,Shadow Transmit Holding Register 5" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x48++0x03 line.long 0x00 "STHR6,Shadow Transmit Holding Register 6" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x4C++0x03 line.long 0x00 "STHR7,Shadow Transmit Holding Register 7" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x50++0x03 line.long 0x00 "STHR8,Shadow Transmit Holding Register 8" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x54++0x03 line.long 0x00 "STHR9,Shadow Transmit Holding Register 9" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x58++0x03 line.long 0x00 "STHR10,Shadow Transmit Holding Register 10" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x5C++0x03 line.long 0x00 "STHR11,Shadow Transmit Holding Register 11" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x60++0x03 line.long 0x00 "STHR12,Shadow Transmit Holding Register 12" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x64++0x03 line.long 0x00 "STHR13,Shadow Transmit Holding Register 13" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x68++0x03 line.long 0x00 "STHR14,Shadow Transmit Holding Register 14" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" wgroup.long 0x6C++0x03 line.long 0x00 "STHR15,Shadow Transmit Holding Register 15" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Data to be transmitted on the serial output port" else hgroup.long 0x30++0x03 hide.long 0x00 "SRBR,Shadow Receive Buffer Register" in wgroup.long 0x34++0x03 line.long 0x00 "STHR,Shadow Transmit Buffer Register" hexmask.long.byte 0x00 0.--7. 1. " STHR ,Shadow Transmit Buffer" endif group.long 0x70++0x03 line.long 0x00 "FAR,FIFO Access Register" bitfld.long 0x00 0. " SRBR_STHR ,FIFO Access Bit" "Disabled,Enabled" hgroup.long 0x74++0x03 hide.long 0x00 "TFR,Transmit FIFO Read Register" in wgroup.long 0x78++0x03 line.long 0x00 "RFW,Receive FIFO Write" bitfld.long 0x00 9. " RFFE ,Receive FIFO Framing Error" "No error,Error" bitfld.long 0x00 8. " RFPE ,Receive FIFO Parity Error" "No error,Error" hexmask.long.byte 0x00 0.--7. 1. " RFWD ,Receive FIFO Write Data" rgroup.long 0x7C++0x0B line.long 0x00 "USR,UART Status Register" bitfld.long 0x00 4. " RFF ,Receive FIFO Full" "Not full,Full" bitfld.long 0x00 3. " RFNE ,Receive FIFO Not Empty" "No,Yes" bitfld.long 0x00 2. " TFE ,Transmit FIFO Empty" "Not empty,Empty" textline " " bitfld.long 0x00 1. " TFNF ,Transmit FIFO Not Full" "No,Yes" sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0. " RSVD_BUSY ,UART Busy" "Not busy,Busy" endif line.long 0x04 "TFL,Transmit FIFO Level" bitfld.long 0x04 0.--4. " TFL ,Transmit FIFO Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" line.long 0x08 "RFL,Receive FIFO Level Write" bitfld.long 0x08 0.--4. " RFL ,Receive FIFO Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" wgroup.long 0x88++0x03 line.long 0x00 "SRR,Software Reset Register" bitfld.long 0x00 2. " XFR ,Tx FIFO Reset" "No reset,Reset" bitfld.long 0x00 1. " RFR ,Rx FIFO Reset" "No reset,Reset" bitfld.long 0x00 0. " UR ,UART Reset" "No reset,Reset" group.long 0x8C++0x1B line.long 0x00 "SRTS,Shadow Request to Send" bitfld.long 0x00 0. " SRTS ,Shadow Request to Send" "Logic 1,Logic 0" line.long 0x04 "SBCR,Shadow Break Control Register" bitfld.long 0x04 0. " SBCR ,Shadow Break Control" "Disabled,Enabled" line.long 0x08 "SDMAM,Shadow DMA Mode" bitfld.long 0x08 0. " SDMAM ,Shadow DMA Mode" "Single transfer,Multiple transfer" line.long 0x0C "SFE,Shadow FIFO Enable" bitfld.long 0x0C 0. " SFE ,Shadow FIFO Enable" "Disabled,Enabled" line.long 0x10 "SRT,Shadow Rx Trigger" bitfld.long 0x10 0.--1. " SRT ,Shadow Rx Trigger Bits" "One character,1/4 full,1/2 full,Less than full" line.long 0x14 "STET,Shadow Tx Empty Trigger" bitfld.long 0x14 0.--1. " STET ,Shadow Tx Empty Trigger Bits" "Empty,Two characters,1/4 full,1/2 full" line.long 0x18 "HTX,Halt Tx" bitfld.long 0x18 0. " HTX ,Halt Tx Bits" "Disabled,Enabled" wgroup.long 0xA8++0x03 line.long 0x00 "DMASA,DMA Software Acknowledge" bitfld.long 0x00 0. " DMASA ,DMA Software Acknowledge Bits" "No effect,Acknowledge" width 8. rgroup.long 0xF4++0x0B line.long 0x00 "CPR,Component Parameter Register" hexmask.long.byte 0x00 16.--23. 1. " FIFO_MODE ,FIFO Depth" bitfld.long 0x00 13. " DMA_EXTRA ,DMA EXTRA Support" "Disabled,Enabled" bitfld.long 0x00 12. " UART_ADD_ENCODED_PARAM ,Configuration ID Register Present" "Disabled,Enabled" textline " " bitfld.long 0x00 11. " SHADOW ,SHADOW Support" "Disabled,Enabled" bitfld.long 0x00 10. " FIFO_STAT ,FIFO STAT Support" "Disabled,Enabled" bitfld.long 0x00 9. " FIFO_ACCESS ,FIFO ACCESS Support" "Disabled,Enabled" textline " " bitfld.long 0x00 8. " ADDITIONAL_FEAT ,ADDITIONAL FEATURES Support" "Disabled,Enabled" bitfld.long 0x00 7. " SIR_LP_MODE ,SIR LP MODE Support" "Disabled,Enabled" bitfld.long 0x00 6. " SIR_MODE ,SIR MODE Support" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " THRE_MODE ,THRE MODE Support" "Disabled,Enabled" bitfld.long 0x00 4. " AFCE_MODE ,Auto Flow Control Support" "Disabled,Enabled" bitfld.long 0x00 0.--1. " APBDATAWIDTH ,APB data width" ",,32-bits,?..." line.long 0x04 "UCV,Component Version" line.long 0x08 "CTR,Component Type Register" width 0x0B tree.end tree.end tree.open "I2C (I2C Module)" tree "I2C 0" base ad:0xFFC04000 width 23. group.long 0x00++0x0B line.long 0x00 "IC_CON,I2C Control register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 9. " RX_FIFO_FULL_HLD_CTRL ,I2C Bus Hold on RX FIFO Full" "Disabled,Enabled" bitfld.long 0x00 8. " TX_EMPTY_CTRL ,TX Empty Interrupt Generation" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " STOP_DET_IFADDRESSED ,STOP_DET Interrupt Generation When Adressed Only" "No,Yes" textline " " endif bitfld.long 0x00 6. " IC_SLAVE_DISABLE ,I2C slave disable" "No,Yes" bitfld.long 0x00 5. " IC_RESTART_EN ,Restart enable" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 4. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x00 3. " IC_10BITADDR_SLAVE ,I2C slave addressing mode" "7-bit,10-bit" textline " " bitfld.long 0x00 1.--2. " SPEED ,I2C operating speed" ",Standard,Fast/Fast plus,High speed" textline " " else bitfld.long 0x00 4. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x00 3. " IC_10BITADDR_SLAVE ,I2C slave addressing mode" "7-bit,10-bit" textline " " bitfld.long 0x00 1.--2. " SPEED ,I2C operating speed" ",Standard,Fast,?..." textline " " endif bitfld.long 0x00 0. " MASTER_MODE ,I2C master enable" "Disabled,Enabled" line.long 0x04 "IC_TAR,I2C Target Address Register" bitfld.long 0x04 12. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x04 11. " SPECIAL ,Special command performing" "Normal,Special" textline " " bitfld.long 0x04 10. " GC_OR_START ,General Call or START BYTE command" "General Call,START BYTE" hexmask.long.word 0x04 0.--9. 1. " IC_TAR ,Target address for master transaction" line.long 0x08 "IC_SAR,I2C Slave Address Register" hexmask.long.word 0x08 0.--9. 1. " IC_SAR ,Slave address" group.long 0x10++0x13 line.long 0x00 "IC_DATA_CMD,I2C Rx/Tx Data Buffer and Command Register" bitfld.long 0x00 10. " RESTART ,Generate Restart" "Not generated,Generated" bitfld.long 0x00 9. " STOP ,Generate Stop" "Not generated,Generated" textline " " bitfld.long 0x00 8. " CMD ,Read/Write performed" "Write,Read" hexmask.long.byte 0x00 0.--7. 1. " DAT ,Data transmitted/received on I2C bus" line.long 0x04 "IC_SS_SCL_HCNT,Standard Speed I2C Clock SCL High Count Register" hexmask.long.word 0x04 0.--15. 1. " IC_SS_SCL_HCNT ,Standard Speed I2C Clock SCL High Count" line.long 0x08 "IC_SS_SCL_LCNT,Standard Speed I2C Clock SCL Low Count Register" hexmask.long.word 0x08 0.--15. 1. " IC_SS_SCL_LCNT ,Standard Speed I2C Clock SCL Low Count" line.long 0x0C "IC_FS_SCL_HCNT,Fast Speed I2C Clock SCL High Count Register" hexmask.long.word 0x0C 0.--15. 1. " IC_FS_SCL_HCNT ,Fast Speed I2C Clock SCL High Count" line.long 0x10 "IC_FS_SCL_LCNT,Fast Speed I2C Clock SCL Low Count Register" hexmask.long.word 0x10 0.--15. 1. " IC_FS_SCL_LCNT ,Fast Speed I2C Clock SCL Low Count" width 23. rgroup.long 0x2C++0x03 line.long 0x00 "IC_INTR_STAT,I2C Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "No interrupt,Interrupt" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "No interrupt,Interrupt" textline " " endif bitfld.long 0x00 11. " R_GEN_CALL ,Generall Call" "No interrupt,Interrupt" bitfld.long 0x00 10. " R_START_DET ,Start detection" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " R_STOP_DET ,Stop detection" "No interrupt,Interrupt" bitfld.long 0x00 8. " R_ACTIVITY ,I2C activity" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " R_RX_DONE ,Receiving done" "No interrupt,Interrupt" bitfld.long 0x00 6. " R_TX_ABRT ,Transmission abort" "No interrupt,Interrupt" textline " " bitfld.long 0x00 5. " R_RD_REQ ,Read requirement" "No interrupt,Interrupt" bitfld.long 0x00 4. " R_TX_EMPTY ,Transmit buffer low" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " R_TX_OVER ,Transmit buffer Overflow" "No interrupt,Interrupt" bitfld.long 0x00 2. " R_RX_FULL ,Receive buffer over treshold" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " R_RX_OVER ,Receive buffer Overflow" "No interrupt,Interrupt" bitfld.long 0x00 0. " R_RX_UNDER ,Receive buffer underrun" "No interrupt,Interrupt" group.long 0x30++0x03 line.long 0x00 "IC_INTR_MASK,I2C Interrupt Mask Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "Masked,Not masked" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "Masked,Not masked" textline " " endif bitfld.long 0x00 11. " M_GEN_CALL ,Generall Call" "Masked,Not masked" bitfld.long 0x00 10. " M_START_DET ,Start detection" "Masked,Not masked" textline " " bitfld.long 0x00 9. " M_STOP_DET ,Stop detection" "Masked,Not masked" bitfld.long 0x00 8. " M_ACTIVITY ,I2C activity" "Masked,Not masked" textline " " bitfld.long 0x00 7. " M_RX_DONE ,Receiving done" "Masked,Not masked" bitfld.long 0x00 6. " M_TX_ABRT ,Transmission abort" "Masked,Not masked" textline " " bitfld.long 0x00 5. " M_RD_REQ ,Read requirement" "Masked,Not masked" bitfld.long 0x00 4. " M_TX_EMPTY ,TX Buffer Empty" "Masked,Not masked" textline " " bitfld.long 0x00 3. " M_TX_OVER ,TX Buffer Overflow" "Masked,Not masked" bitfld.long 0x00 2. " M_RX_FULL ,RX Buffer Full" "Masked,Not masked" textline " " bitfld.long 0x00 1. " M_RX_OVER ,RX Buffer Overflow" "Masked,Not masked" bitfld.long 0x00 0. " M_RX_UNDER ,Mask RX Buffer Underrun" "Masked,Not masked" rgroup.long 0x34++0x03 line.long 0x00 "IC_RAW_INTR_STAT,I2C Raw Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "Not masked,Masked" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "Not masked,Masked" textline " " endif bitfld.long 0x00 11. " GEN_CALL ,Raw Interrupt General Call" "No interrupt,Interrupt" bitfld.long 0x00 10. " START_DET ,Raw Interrupt Start Detect" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " STOP_DET ,Raw Interrupt Stop Detect" "No interrupt,Interrupt" bitfld.long 0x00 8. " ACTIVITY ,Raw Interrupt Activity" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " RX_DONE ,Raw Interrupt RX Done" "No interrupt,Interrupt" bitfld.long 0x00 6. " TX_ABRT ,Raw Interrupt TX Abort" "No interrupt,Interrupt" textline " " bitfld.long 0x00 5. " RD_REQ ,Raw Interrupt Read Request" "No interrupt,Interrupt" bitfld.long 0x00 4. " TX_EMPTY ,Raw Interrupt TX Empty" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " TX_OVER ,Raw Interrupt TX Overflow" "No interrupt,Interrupt" bitfld.long 0x00 2. " RX_FULL ,Raw Interrupt RX Full" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " RX_OVER ,Raw Interrupt RX Overflow" "No interrupt,Interrupt" bitfld.long 0x00 0. " RX_UNDER ,I2C Raw Interrupt RX Underrun" "No interrupt,Interrupt" group.long 0x38++0x07 line.long 0x00 "IC_RX_TL,I2C Receive FIFO Threshold Register" hexmask.long.byte 0x00 0.--7. 1. " RX_TL ,Receive FIFO Threshold Level" line.long 0x04 "IC_TX_TL,I2C Transmit FIFO Threshold Register" hexmask.long.byte 0x04 0.--7. 1. " TX_TL ,Transmit FIFO Threshold Level Controls" hgroup.long 0x40++0x03 hide.long 0x00 "IC_CLR_INTR,Clear Combined and Individual Interrupt Register" in hgroup.long 0x44++0x03 hide.long 0x00 "IC_CLR_RX_UNDER,Clear RX_UNDER Interrupt Register" in hgroup.long 0x48++0x03 hide.long 0x00 "IC_CLR_RX_OVER,Clear RX_OVER Interrupt Register" in hgroup.long 0x4C++0x03 hide.long 0x00 "IC_CLR_TX_OVER,Clear TX_OVER Interrupt Register" in hgroup.long 0x50++0x03 hide.long 0x00 "IC_CLR_RD_REQ,Clear RD_REQ Interrupt Register" in hgroup.long 0x54++0x03 hide.long 0x00 "IC_CLR_TX_ABRT,Clear TX_ABRT Interrupt Register" in hgroup.long 0x58++0x03 hide.long 0x00 "IC_CLR_RX_DONE,Clear RX_DONE Interrupt Register" in hgroup.long 0x5C++0x03 hide.long 0x00 "IC_CLR_ACTIVITY,Clear ACTIVITY Interrupt Register" in hgroup.long 0x60++0x03 hide.long 0x00 "IC_CLR_STOP_DET,Clear STOP_DET Interrupt Register" in hgroup.long 0x64++0x03 hide.long 0x00 "IC_CLR_START_DET,Clear START_DET Interrupt Register" in hgroup.long 0x68++0x03 hide.long 0x00 "IC_CLR_GEN_CALL,Clear GEN_CALL Interrupt Register" in sif cpu()=="ARRIA10SOC" hgroup.long 0xA8++0x03 hide.long 0x00 "IC_CLR_RESTART_DET,Clear RESTART_DET Interrupt Register" in endif group.long 0x6C++0x03 line.long 0x00 "IC_ENABLE,I2C Enable Register" bitfld.long 0x00 1. " TXABORT ,TX abort Bit" "Not aborted,Aborted" bitfld.long 0x00 0. " ENABLE ,Controls whether the I2C is enabled" "Disabled,Enabled" rgroup.long 0x70++0x0B line.long 0x00 "IC_STATUS,I2C Status Register" bitfld.long 0x00 6. " SLV_ACTIVITY ,Slave FSM Activity Status" "Not active,Active" bitfld.long 0x00 5. " MST_ACTIVITY ,Master FSM Activity Status" "Not active,Active" textline " " bitfld.long 0x00 4. " RFF ,Receive FIFO Completely Full" "Not full,Full" bitfld.long 0x00 3. " RFNE ,Receive FIFO Not Empty" "Empty,Not empty" textline " " bitfld.long 0x00 2. " TFE ,Transmit FIFO Completely Empty" "Not empty,Empty" bitfld.long 0x00 1. " TFNF ,Transmit FIFO Not Full" "Full,Not full" textline " " bitfld.long 0x00 0. " ACTIVITY ,I2C Activity Status" "Not active,Active" line.long 0x04 "IC_TXFLR,I2C Transmit FIFO Level Register" hexmask.long.byte 0x04 0.--6. 1. " TXFLR ,Transmit FIFO Level" line.long 0x08 "IC_RXFLR,I2C Receive FIFO Level Register" hexmask.long.byte 0x08 0.--6. 1. " RXFLR ,Receive FIFO Level Bit" width 23. group.long 0x7C++0x03 line.long 0x00 "IC_SDA_HOLD,I2C SDA Hold Register" sif cpu()=="ARRIA10SOC" hexmask.long.byte 0x00 16.--23. 1. " IC_SDA_RX_HOLD ,SDA RX Hold Time" hexmask.long.word 0x00 0.--15. 1. " IC_SDA_TX_HOLD ,SDA TX Hold Time" textline " " else hexmask.long.word 0x00 0.--15. 1. " IC_SDA_HOLD ,SDA Hold Time" endif sif cpu()=="ARRIA10SOC" if (d.l(ad:0xFFC04000)&0x01)==0x01 rgroup.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT ,Flushed TX FIFO Data Commands Count" bitfld.long 0x00 16. " ABRT_USER_ABRT ,User-requested abort" "Not aborted,Aborted" textline " " bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 3. " ABRT_TXDATA_NOACK ,Master has received an acknowledgement for the address (No ack)" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" else rgroup.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT ,Flushed TX FIFO Data Commands Count" textline " " bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" endif else if (d.l(ad:0xFFC04000)&0x01)==0x01 group.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 3. " ABRT_TXDATA_NOACK ,Master has received an acknowledgement for the address (No ack)" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" else group.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" endif endif group.long 0x84++0x17 line.long 0x00 "IC_SLV_DATA_NACK_ONLY,Generate Slave Data NACK Register" bitfld.long 0x00 0. " NACK ,Generate NACK" "Normally,After data byte" line.long 0x04 "IC_DMA_CR,DMA Control Register" bitfld.long 0x04 1. " TDMAE ,Transmit DMA Enable" "Disabled,Enabled" bitfld.long 0x04 0. " RDMAE ,Receive DMA Enable" "Disabled,Enabled" line.long 0x08 "IC_DMA_TDLR,DMA Transmit Data Level Register" bitfld.long 0x08 0.--5. " DMATDL ,Transmit Data Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" line.long 0x0C "IC_DMA_RDLR,I2C Receive Data Level Register" bitfld.long 0x0C 0.--5. " DMARD ,Receive Data Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" line.long 0x10 "IC_SDA_SETUP,I2C SDA Setup Register" hexmask.long.byte 0x10 0.--7. 1. " SDA_SETUP ,SDA Setup" line.long 0x14 "IC_ACK_GENERAL_CALL,I2C ACK General Call Register" bitfld.long 0x14 0. " ACK_GEN_CALL ,ACK General Call" "NACK,ACK" rgroup.long 0x9C++0x03 line.long 0x00 "IC_ENABLE_STATUS,I2C Enable Status Register" bitfld.long 0x00 2. " SLV_RX_DATA_LOST ,Slave Received Data Lost" "Not lost,Lost" bitfld.long 0x00 1. " SLV_DISABLED_WHILE_BUSY ,Slave Disabled While Busy" "No,Yes" textline " " bitfld.long 0x00 0. " IC_EN ,Ic_en Status" "Disabled,Enabled" group.long 0xA0++0x03 line.long 0x00 "IC_FS_SPKLEN,I2C SS and FS spike suppression limit" hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN ,Spike Suppression Limit Register" width 23. rgroup.long 0xF4++0x0B line.long 0x00 "IC_COMP_PARAM_1,Component Parameter Register 1" hexmask.long.byte 0x00 16.--23. 1. " TX_BUFFER_DEPTH ,Transmit buffer depth" hexmask.long.byte 0x00 8.--15. 1. " RX_BUFFER_DEPTH ,Receive buffer depth" textline " " bitfld.long 0x00 7. " ADD_ENCODED_PARAMS ,Add Encoded Params" ",True" bitfld.long 0x00 6. " HAS_DMA ,Has DMA" ",True" textline " " bitfld.long 0x00 5. " INTR_IO ,Intr IO" ",Combined" bitfld.long 0x00 4. " HC_COUNT_VALUES ,CNT Registers Access" "Read/Write,?..." textline " " bitfld.long 0x00 2.--3. " MAX_SPEED_MODE ,Max Speed Mode" ",,Fast,?..." bitfld.long 0x00 0.--1. " APB_DATA_WIDTH ,APB Data Width Register" ",,32bits,?..." line.long 0x04 "IC_COMP_VERSION,I2C Component Version Register" line.long 0x08 "IC_COMP_TYPE,I2C Component Type Register" width 0x0B tree.end tree "I2C 1" base ad:0xFFC05000 width 23. group.long 0x00++0x0B line.long 0x00 "IC_CON,I2C Control register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 9. " RX_FIFO_FULL_HLD_CTRL ,I2C Bus Hold on RX FIFO Full" "Disabled,Enabled" bitfld.long 0x00 8. " TX_EMPTY_CTRL ,TX Empty Interrupt Generation" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " STOP_DET_IFADDRESSED ,STOP_DET Interrupt Generation When Adressed Only" "No,Yes" textline " " endif bitfld.long 0x00 6. " IC_SLAVE_DISABLE ,I2C slave disable" "No,Yes" bitfld.long 0x00 5. " IC_RESTART_EN ,Restart enable" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 4. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x00 3. " IC_10BITADDR_SLAVE ,I2C slave addressing mode" "7-bit,10-bit" textline " " bitfld.long 0x00 1.--2. " SPEED ,I2C operating speed" ",Standard,Fast/Fast plus,High speed" textline " " else bitfld.long 0x00 4. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x00 3. " IC_10BITADDR_SLAVE ,I2C slave addressing mode" "7-bit,10-bit" textline " " bitfld.long 0x00 1.--2. " SPEED ,I2C operating speed" ",Standard,Fast,?..." textline " " endif bitfld.long 0x00 0. " MASTER_MODE ,I2C master enable" "Disabled,Enabled" line.long 0x04 "IC_TAR,I2C Target Address Register" bitfld.long 0x04 12. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x04 11. " SPECIAL ,Special command performing" "Normal,Special" textline " " bitfld.long 0x04 10. " GC_OR_START ,General Call or START BYTE command" "General Call,START BYTE" hexmask.long.word 0x04 0.--9. 1. " IC_TAR ,Target address for master transaction" line.long 0x08 "IC_SAR,I2C Slave Address Register" hexmask.long.word 0x08 0.--9. 1. " IC_SAR ,Slave address" group.long 0x10++0x13 line.long 0x00 "IC_DATA_CMD,I2C Rx/Tx Data Buffer and Command Register" bitfld.long 0x00 10. " RESTART ,Generate Restart" "Not generated,Generated" bitfld.long 0x00 9. " STOP ,Generate Stop" "Not generated,Generated" textline " " bitfld.long 0x00 8. " CMD ,Read/Write performed" "Write,Read" hexmask.long.byte 0x00 0.--7. 1. " DAT ,Data transmitted/received on I2C bus" line.long 0x04 "IC_SS_SCL_HCNT,Standard Speed I2C Clock SCL High Count Register" hexmask.long.word 0x04 0.--15. 1. " IC_SS_SCL_HCNT ,Standard Speed I2C Clock SCL High Count" line.long 0x08 "IC_SS_SCL_LCNT,Standard Speed I2C Clock SCL Low Count Register" hexmask.long.word 0x08 0.--15. 1. " IC_SS_SCL_LCNT ,Standard Speed I2C Clock SCL Low Count" line.long 0x0C "IC_FS_SCL_HCNT,Fast Speed I2C Clock SCL High Count Register" hexmask.long.word 0x0C 0.--15. 1. " IC_FS_SCL_HCNT ,Fast Speed I2C Clock SCL High Count" line.long 0x10 "IC_FS_SCL_LCNT,Fast Speed I2C Clock SCL Low Count Register" hexmask.long.word 0x10 0.--15. 1. " IC_FS_SCL_LCNT ,Fast Speed I2C Clock SCL Low Count" width 23. rgroup.long 0x2C++0x03 line.long 0x00 "IC_INTR_STAT,I2C Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "No interrupt,Interrupt" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "No interrupt,Interrupt" textline " " endif bitfld.long 0x00 11. " R_GEN_CALL ,Generall Call" "No interrupt,Interrupt" bitfld.long 0x00 10. " R_START_DET ,Start detection" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " R_STOP_DET ,Stop detection" "No interrupt,Interrupt" bitfld.long 0x00 8. " R_ACTIVITY ,I2C activity" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " R_RX_DONE ,Receiving done" "No interrupt,Interrupt" bitfld.long 0x00 6. " R_TX_ABRT ,Transmission abort" "No interrupt,Interrupt" textline " " bitfld.long 0x00 5. " R_RD_REQ ,Read requirement" "No interrupt,Interrupt" bitfld.long 0x00 4. " R_TX_EMPTY ,Transmit buffer low" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " R_TX_OVER ,Transmit buffer Overflow" "No interrupt,Interrupt" bitfld.long 0x00 2. " R_RX_FULL ,Receive buffer over treshold" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " R_RX_OVER ,Receive buffer Overflow" "No interrupt,Interrupt" bitfld.long 0x00 0. " R_RX_UNDER ,Receive buffer underrun" "No interrupt,Interrupt" group.long 0x30++0x03 line.long 0x00 "IC_INTR_MASK,I2C Interrupt Mask Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "Masked,Not masked" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "Masked,Not masked" textline " " endif bitfld.long 0x00 11. " M_GEN_CALL ,Generall Call" "Masked,Not masked" bitfld.long 0x00 10. " M_START_DET ,Start detection" "Masked,Not masked" textline " " bitfld.long 0x00 9. " M_STOP_DET ,Stop detection" "Masked,Not masked" bitfld.long 0x00 8. " M_ACTIVITY ,I2C activity" "Masked,Not masked" textline " " bitfld.long 0x00 7. " M_RX_DONE ,Receiving done" "Masked,Not masked" bitfld.long 0x00 6. " M_TX_ABRT ,Transmission abort" "Masked,Not masked" textline " " bitfld.long 0x00 5. " M_RD_REQ ,Read requirement" "Masked,Not masked" bitfld.long 0x00 4. " M_TX_EMPTY ,TX Buffer Empty" "Masked,Not masked" textline " " bitfld.long 0x00 3. " M_TX_OVER ,TX Buffer Overflow" "Masked,Not masked" bitfld.long 0x00 2. " M_RX_FULL ,RX Buffer Full" "Masked,Not masked" textline " " bitfld.long 0x00 1. " M_RX_OVER ,RX Buffer Overflow" "Masked,Not masked" bitfld.long 0x00 0. " M_RX_UNDER ,Mask RX Buffer Underrun" "Masked,Not masked" rgroup.long 0x34++0x03 line.long 0x00 "IC_RAW_INTR_STAT,I2C Raw Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "Not masked,Masked" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "Not masked,Masked" textline " " endif bitfld.long 0x00 11. " GEN_CALL ,Raw Interrupt General Call" "No interrupt,Interrupt" bitfld.long 0x00 10. " START_DET ,Raw Interrupt Start Detect" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " STOP_DET ,Raw Interrupt Stop Detect" "No interrupt,Interrupt" bitfld.long 0x00 8. " ACTIVITY ,Raw Interrupt Activity" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " RX_DONE ,Raw Interrupt RX Done" "No interrupt,Interrupt" bitfld.long 0x00 6. " TX_ABRT ,Raw Interrupt TX Abort" "No interrupt,Interrupt" textline " " bitfld.long 0x00 5. " RD_REQ ,Raw Interrupt Read Request" "No interrupt,Interrupt" bitfld.long 0x00 4. " TX_EMPTY ,Raw Interrupt TX Empty" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " TX_OVER ,Raw Interrupt TX Overflow" "No interrupt,Interrupt" bitfld.long 0x00 2. " RX_FULL ,Raw Interrupt RX Full" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " RX_OVER ,Raw Interrupt RX Overflow" "No interrupt,Interrupt" bitfld.long 0x00 0. " RX_UNDER ,I2C Raw Interrupt RX Underrun" "No interrupt,Interrupt" group.long 0x38++0x07 line.long 0x00 "IC_RX_TL,I2C Receive FIFO Threshold Register" hexmask.long.byte 0x00 0.--7. 1. " RX_TL ,Receive FIFO Threshold Level" line.long 0x04 "IC_TX_TL,I2C Transmit FIFO Threshold Register" hexmask.long.byte 0x04 0.--7. 1. " TX_TL ,Transmit FIFO Threshold Level Controls" hgroup.long 0x40++0x03 hide.long 0x00 "IC_CLR_INTR,Clear Combined and Individual Interrupt Register" in hgroup.long 0x44++0x03 hide.long 0x00 "IC_CLR_RX_UNDER,Clear RX_UNDER Interrupt Register" in hgroup.long 0x48++0x03 hide.long 0x00 "IC_CLR_RX_OVER,Clear RX_OVER Interrupt Register" in hgroup.long 0x4C++0x03 hide.long 0x00 "IC_CLR_TX_OVER,Clear TX_OVER Interrupt Register" in hgroup.long 0x50++0x03 hide.long 0x00 "IC_CLR_RD_REQ,Clear RD_REQ Interrupt Register" in hgroup.long 0x54++0x03 hide.long 0x00 "IC_CLR_TX_ABRT,Clear TX_ABRT Interrupt Register" in hgroup.long 0x58++0x03 hide.long 0x00 "IC_CLR_RX_DONE,Clear RX_DONE Interrupt Register" in hgroup.long 0x5C++0x03 hide.long 0x00 "IC_CLR_ACTIVITY,Clear ACTIVITY Interrupt Register" in hgroup.long 0x60++0x03 hide.long 0x00 "IC_CLR_STOP_DET,Clear STOP_DET Interrupt Register" in hgroup.long 0x64++0x03 hide.long 0x00 "IC_CLR_START_DET,Clear START_DET Interrupt Register" in hgroup.long 0x68++0x03 hide.long 0x00 "IC_CLR_GEN_CALL,Clear GEN_CALL Interrupt Register" in sif cpu()=="ARRIA10SOC" hgroup.long 0xA8++0x03 hide.long 0x00 "IC_CLR_RESTART_DET,Clear RESTART_DET Interrupt Register" in endif group.long 0x6C++0x03 line.long 0x00 "IC_ENABLE,I2C Enable Register" bitfld.long 0x00 1. " TXABORT ,TX abort Bit" "Not aborted,Aborted" bitfld.long 0x00 0. " ENABLE ,Controls whether the I2C is enabled" "Disabled,Enabled" rgroup.long 0x70++0x0B line.long 0x00 "IC_STATUS,I2C Status Register" bitfld.long 0x00 6. " SLV_ACTIVITY ,Slave FSM Activity Status" "Not active,Active" bitfld.long 0x00 5. " MST_ACTIVITY ,Master FSM Activity Status" "Not active,Active" textline " " bitfld.long 0x00 4. " RFF ,Receive FIFO Completely Full" "Not full,Full" bitfld.long 0x00 3. " RFNE ,Receive FIFO Not Empty" "Empty,Not empty" textline " " bitfld.long 0x00 2. " TFE ,Transmit FIFO Completely Empty" "Not empty,Empty" bitfld.long 0x00 1. " TFNF ,Transmit FIFO Not Full" "Full,Not full" textline " " bitfld.long 0x00 0. " ACTIVITY ,I2C Activity Status" "Not active,Active" line.long 0x04 "IC_TXFLR,I2C Transmit FIFO Level Register" hexmask.long.byte 0x04 0.--6. 1. " TXFLR ,Transmit FIFO Level" line.long 0x08 "IC_RXFLR,I2C Receive FIFO Level Register" hexmask.long.byte 0x08 0.--6. 1. " RXFLR ,Receive FIFO Level Bit" width 23. group.long 0x7C++0x03 line.long 0x00 "IC_SDA_HOLD,I2C SDA Hold Register" sif cpu()=="ARRIA10SOC" hexmask.long.byte 0x00 16.--23. 1. " IC_SDA_RX_HOLD ,SDA RX Hold Time" hexmask.long.word 0x00 0.--15. 1. " IC_SDA_TX_HOLD ,SDA TX Hold Time" textline " " else hexmask.long.word 0x00 0.--15. 1. " IC_SDA_HOLD ,SDA Hold Time" endif sif cpu()=="ARRIA10SOC" if (d.l(ad:0xFFC05000)&0x01)==0x01 rgroup.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT ,Flushed TX FIFO Data Commands Count" bitfld.long 0x00 16. " ABRT_USER_ABRT ,User-requested abort" "Not aborted,Aborted" textline " " bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 3. " ABRT_TXDATA_NOACK ,Master has received an acknowledgement for the address (No ack)" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" else rgroup.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT ,Flushed TX FIFO Data Commands Count" textline " " bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" endif else if (d.l(ad:0xFFC05000)&0x01)==0x01 group.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 3. " ABRT_TXDATA_NOACK ,Master has received an acknowledgement for the address (No ack)" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" else group.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" endif endif group.long 0x84++0x17 line.long 0x00 "IC_SLV_DATA_NACK_ONLY,Generate Slave Data NACK Register" bitfld.long 0x00 0. " NACK ,Generate NACK" "Normally,After data byte" line.long 0x04 "IC_DMA_CR,DMA Control Register" bitfld.long 0x04 1. " TDMAE ,Transmit DMA Enable" "Disabled,Enabled" bitfld.long 0x04 0. " RDMAE ,Receive DMA Enable" "Disabled,Enabled" line.long 0x08 "IC_DMA_TDLR,DMA Transmit Data Level Register" bitfld.long 0x08 0.--5. " DMATDL ,Transmit Data Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" line.long 0x0C "IC_DMA_RDLR,I2C Receive Data Level Register" bitfld.long 0x0C 0.--5. " DMARD ,Receive Data Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" line.long 0x10 "IC_SDA_SETUP,I2C SDA Setup Register" hexmask.long.byte 0x10 0.--7. 1. " SDA_SETUP ,SDA Setup" line.long 0x14 "IC_ACK_GENERAL_CALL,I2C ACK General Call Register" bitfld.long 0x14 0. " ACK_GEN_CALL ,ACK General Call" "NACK,ACK" rgroup.long 0x9C++0x03 line.long 0x00 "IC_ENABLE_STATUS,I2C Enable Status Register" bitfld.long 0x00 2. " SLV_RX_DATA_LOST ,Slave Received Data Lost" "Not lost,Lost" bitfld.long 0x00 1. " SLV_DISABLED_WHILE_BUSY ,Slave Disabled While Busy" "No,Yes" textline " " bitfld.long 0x00 0. " IC_EN ,Ic_en Status" "Disabled,Enabled" group.long 0xA0++0x03 line.long 0x00 "IC_FS_SPKLEN,I2C SS and FS spike suppression limit" hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN ,Spike Suppression Limit Register" width 23. rgroup.long 0xF4++0x0B line.long 0x00 "IC_COMP_PARAM_1,Component Parameter Register 1" hexmask.long.byte 0x00 16.--23. 1. " TX_BUFFER_DEPTH ,Transmit buffer depth" hexmask.long.byte 0x00 8.--15. 1. " RX_BUFFER_DEPTH ,Receive buffer depth" textline " " bitfld.long 0x00 7. " ADD_ENCODED_PARAMS ,Add Encoded Params" ",True" bitfld.long 0x00 6. " HAS_DMA ,Has DMA" ",True" textline " " bitfld.long 0x00 5. " INTR_IO ,Intr IO" ",Combined" bitfld.long 0x00 4. " HC_COUNT_VALUES ,CNT Registers Access" "Read/Write,?..." textline " " bitfld.long 0x00 2.--3. " MAX_SPEED_MODE ,Max Speed Mode" ",,Fast,?..." bitfld.long 0x00 0.--1. " APB_DATA_WIDTH ,APB Data Width Register" ",,32bits,?..." line.long 0x04 "IC_COMP_VERSION,I2C Component Version Register" line.long 0x08 "IC_COMP_TYPE,I2C Component Type Register" width 0x0B tree.end tree "I2C 2" base ad:0xFFC06000 width 23. group.long 0x00++0x0B line.long 0x00 "IC_CON,I2C Control register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 9. " RX_FIFO_FULL_HLD_CTRL ,I2C Bus Hold on RX FIFO Full" "Disabled,Enabled" bitfld.long 0x00 8. " TX_EMPTY_CTRL ,TX Empty Interrupt Generation" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " STOP_DET_IFADDRESSED ,STOP_DET Interrupt Generation When Adressed Only" "No,Yes" textline " " endif bitfld.long 0x00 6. " IC_SLAVE_DISABLE ,I2C slave disable" "No,Yes" bitfld.long 0x00 5. " IC_RESTART_EN ,Restart enable" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 4. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x00 3. " IC_10BITADDR_SLAVE ,I2C slave addressing mode" "7-bit,10-bit" textline " " bitfld.long 0x00 1.--2. " SPEED ,I2C operating speed" ",Standard,Fast/Fast plus,High speed" textline " " else bitfld.long 0x00 4. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x00 3. " IC_10BITADDR_SLAVE ,I2C slave addressing mode" "7-bit,10-bit" textline " " bitfld.long 0x00 1.--2. " SPEED ,I2C operating speed" ",Standard,Fast,?..." textline " " endif bitfld.long 0x00 0. " MASTER_MODE ,I2C master enable" "Disabled,Enabled" line.long 0x04 "IC_TAR,I2C Target Address Register" bitfld.long 0x04 12. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x04 11. " SPECIAL ,Special command performing" "Normal,Special" textline " " bitfld.long 0x04 10. " GC_OR_START ,General Call or START BYTE command" "General Call,START BYTE" hexmask.long.word 0x04 0.--9. 1. " IC_TAR ,Target address for master transaction" line.long 0x08 "IC_SAR,I2C Slave Address Register" hexmask.long.word 0x08 0.--9. 1. " IC_SAR ,Slave address" group.long 0x10++0x13 line.long 0x00 "IC_DATA_CMD,I2C Rx/Tx Data Buffer and Command Register" bitfld.long 0x00 10. " RESTART ,Generate Restart" "Not generated,Generated" bitfld.long 0x00 9. " STOP ,Generate Stop" "Not generated,Generated" textline " " bitfld.long 0x00 8. " CMD ,Read/Write performed" "Write,Read" hexmask.long.byte 0x00 0.--7. 1. " DAT ,Data transmitted/received on I2C bus" line.long 0x04 "IC_SS_SCL_HCNT,Standard Speed I2C Clock SCL High Count Register" hexmask.long.word 0x04 0.--15. 1. " IC_SS_SCL_HCNT ,Standard Speed I2C Clock SCL High Count" line.long 0x08 "IC_SS_SCL_LCNT,Standard Speed I2C Clock SCL Low Count Register" hexmask.long.word 0x08 0.--15. 1. " IC_SS_SCL_LCNT ,Standard Speed I2C Clock SCL Low Count" line.long 0x0C "IC_FS_SCL_HCNT,Fast Speed I2C Clock SCL High Count Register" hexmask.long.word 0x0C 0.--15. 1. " IC_FS_SCL_HCNT ,Fast Speed I2C Clock SCL High Count" line.long 0x10 "IC_FS_SCL_LCNT,Fast Speed I2C Clock SCL Low Count Register" hexmask.long.word 0x10 0.--15. 1. " IC_FS_SCL_LCNT ,Fast Speed I2C Clock SCL Low Count" width 23. rgroup.long 0x2C++0x03 line.long 0x00 "IC_INTR_STAT,I2C Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "No interrupt,Interrupt" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "No interrupt,Interrupt" textline " " endif bitfld.long 0x00 11. " R_GEN_CALL ,Generall Call" "No interrupt,Interrupt" bitfld.long 0x00 10. " R_START_DET ,Start detection" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " R_STOP_DET ,Stop detection" "No interrupt,Interrupt" bitfld.long 0x00 8. " R_ACTIVITY ,I2C activity" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " R_RX_DONE ,Receiving done" "No interrupt,Interrupt" bitfld.long 0x00 6. " R_TX_ABRT ,Transmission abort" "No interrupt,Interrupt" textline " " bitfld.long 0x00 5. " R_RD_REQ ,Read requirement" "No interrupt,Interrupt" bitfld.long 0x00 4. " R_TX_EMPTY ,Transmit buffer low" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " R_TX_OVER ,Transmit buffer Overflow" "No interrupt,Interrupt" bitfld.long 0x00 2. " R_RX_FULL ,Receive buffer over treshold" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " R_RX_OVER ,Receive buffer Overflow" "No interrupt,Interrupt" bitfld.long 0x00 0. " R_RX_UNDER ,Receive buffer underrun" "No interrupt,Interrupt" group.long 0x30++0x03 line.long 0x00 "IC_INTR_MASK,I2C Interrupt Mask Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "Masked,Not masked" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "Masked,Not masked" textline " " endif bitfld.long 0x00 11. " M_GEN_CALL ,Generall Call" "Masked,Not masked" bitfld.long 0x00 10. " M_START_DET ,Start detection" "Masked,Not masked" textline " " bitfld.long 0x00 9. " M_STOP_DET ,Stop detection" "Masked,Not masked" bitfld.long 0x00 8. " M_ACTIVITY ,I2C activity" "Masked,Not masked" textline " " bitfld.long 0x00 7. " M_RX_DONE ,Receiving done" "Masked,Not masked" bitfld.long 0x00 6. " M_TX_ABRT ,Transmission abort" "Masked,Not masked" textline " " bitfld.long 0x00 5. " M_RD_REQ ,Read requirement" "Masked,Not masked" bitfld.long 0x00 4. " M_TX_EMPTY ,TX Buffer Empty" "Masked,Not masked" textline " " bitfld.long 0x00 3. " M_TX_OVER ,TX Buffer Overflow" "Masked,Not masked" bitfld.long 0x00 2. " M_RX_FULL ,RX Buffer Full" "Masked,Not masked" textline " " bitfld.long 0x00 1. " M_RX_OVER ,RX Buffer Overflow" "Masked,Not masked" bitfld.long 0x00 0. " M_RX_UNDER ,Mask RX Buffer Underrun" "Masked,Not masked" rgroup.long 0x34++0x03 line.long 0x00 "IC_RAW_INTR_STAT,I2C Raw Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "Not masked,Masked" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "Not masked,Masked" textline " " endif bitfld.long 0x00 11. " GEN_CALL ,Raw Interrupt General Call" "No interrupt,Interrupt" bitfld.long 0x00 10. " START_DET ,Raw Interrupt Start Detect" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " STOP_DET ,Raw Interrupt Stop Detect" "No interrupt,Interrupt" bitfld.long 0x00 8. " ACTIVITY ,Raw Interrupt Activity" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " RX_DONE ,Raw Interrupt RX Done" "No interrupt,Interrupt" bitfld.long 0x00 6. " TX_ABRT ,Raw Interrupt TX Abort" "No interrupt,Interrupt" textline " " bitfld.long 0x00 5. " RD_REQ ,Raw Interrupt Read Request" "No interrupt,Interrupt" bitfld.long 0x00 4. " TX_EMPTY ,Raw Interrupt TX Empty" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " TX_OVER ,Raw Interrupt TX Overflow" "No interrupt,Interrupt" bitfld.long 0x00 2. " RX_FULL ,Raw Interrupt RX Full" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " RX_OVER ,Raw Interrupt RX Overflow" "No interrupt,Interrupt" bitfld.long 0x00 0. " RX_UNDER ,I2C Raw Interrupt RX Underrun" "No interrupt,Interrupt" group.long 0x38++0x07 line.long 0x00 "IC_RX_TL,I2C Receive FIFO Threshold Register" hexmask.long.byte 0x00 0.--7. 1. " RX_TL ,Receive FIFO Threshold Level" line.long 0x04 "IC_TX_TL,I2C Transmit FIFO Threshold Register" hexmask.long.byte 0x04 0.--7. 1. " TX_TL ,Transmit FIFO Threshold Level Controls" hgroup.long 0x40++0x03 hide.long 0x00 "IC_CLR_INTR,Clear Combined and Individual Interrupt Register" in hgroup.long 0x44++0x03 hide.long 0x00 "IC_CLR_RX_UNDER,Clear RX_UNDER Interrupt Register" in hgroup.long 0x48++0x03 hide.long 0x00 "IC_CLR_RX_OVER,Clear RX_OVER Interrupt Register" in hgroup.long 0x4C++0x03 hide.long 0x00 "IC_CLR_TX_OVER,Clear TX_OVER Interrupt Register" in hgroup.long 0x50++0x03 hide.long 0x00 "IC_CLR_RD_REQ,Clear RD_REQ Interrupt Register" in hgroup.long 0x54++0x03 hide.long 0x00 "IC_CLR_TX_ABRT,Clear TX_ABRT Interrupt Register" in hgroup.long 0x58++0x03 hide.long 0x00 "IC_CLR_RX_DONE,Clear RX_DONE Interrupt Register" in hgroup.long 0x5C++0x03 hide.long 0x00 "IC_CLR_ACTIVITY,Clear ACTIVITY Interrupt Register" in hgroup.long 0x60++0x03 hide.long 0x00 "IC_CLR_STOP_DET,Clear STOP_DET Interrupt Register" in hgroup.long 0x64++0x03 hide.long 0x00 "IC_CLR_START_DET,Clear START_DET Interrupt Register" in hgroup.long 0x68++0x03 hide.long 0x00 "IC_CLR_GEN_CALL,Clear GEN_CALL Interrupt Register" in sif cpu()=="ARRIA10SOC" hgroup.long 0xA8++0x03 hide.long 0x00 "IC_CLR_RESTART_DET,Clear RESTART_DET Interrupt Register" in endif group.long 0x6C++0x03 line.long 0x00 "IC_ENABLE,I2C Enable Register" bitfld.long 0x00 1. " TXABORT ,TX abort Bit" "Not aborted,Aborted" bitfld.long 0x00 0. " ENABLE ,Controls whether the I2C is enabled" "Disabled,Enabled" rgroup.long 0x70++0x0B line.long 0x00 "IC_STATUS,I2C Status Register" bitfld.long 0x00 6. " SLV_ACTIVITY ,Slave FSM Activity Status" "Not active,Active" bitfld.long 0x00 5. " MST_ACTIVITY ,Master FSM Activity Status" "Not active,Active" textline " " bitfld.long 0x00 4. " RFF ,Receive FIFO Completely Full" "Not full,Full" bitfld.long 0x00 3. " RFNE ,Receive FIFO Not Empty" "Empty,Not empty" textline " " bitfld.long 0x00 2. " TFE ,Transmit FIFO Completely Empty" "Not empty,Empty" bitfld.long 0x00 1. " TFNF ,Transmit FIFO Not Full" "Full,Not full" textline " " bitfld.long 0x00 0. " ACTIVITY ,I2C Activity Status" "Not active,Active" line.long 0x04 "IC_TXFLR,I2C Transmit FIFO Level Register" hexmask.long.byte 0x04 0.--6. 1. " TXFLR ,Transmit FIFO Level" line.long 0x08 "IC_RXFLR,I2C Receive FIFO Level Register" hexmask.long.byte 0x08 0.--6. 1. " RXFLR ,Receive FIFO Level Bit" width 23. group.long 0x7C++0x03 line.long 0x00 "IC_SDA_HOLD,I2C SDA Hold Register" sif cpu()=="ARRIA10SOC" hexmask.long.byte 0x00 16.--23. 1. " IC_SDA_RX_HOLD ,SDA RX Hold Time" hexmask.long.word 0x00 0.--15. 1. " IC_SDA_TX_HOLD ,SDA TX Hold Time" textline " " else hexmask.long.word 0x00 0.--15. 1. " IC_SDA_HOLD ,SDA Hold Time" endif sif cpu()=="ARRIA10SOC" if (d.l(ad:0xFFC06000)&0x01)==0x01 rgroup.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT ,Flushed TX FIFO Data Commands Count" bitfld.long 0x00 16. " ABRT_USER_ABRT ,User-requested abort" "Not aborted,Aborted" textline " " bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 3. " ABRT_TXDATA_NOACK ,Master has received an acknowledgement for the address (No ack)" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" else rgroup.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT ,Flushed TX FIFO Data Commands Count" textline " " bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" endif else if (d.l(ad:0xFFC06000)&0x01)==0x01 group.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 3. " ABRT_TXDATA_NOACK ,Master has received an acknowledgement for the address (No ack)" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" else group.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" endif endif group.long 0x84++0x17 line.long 0x00 "IC_SLV_DATA_NACK_ONLY,Generate Slave Data NACK Register" bitfld.long 0x00 0. " NACK ,Generate NACK" "Normally,After data byte" line.long 0x04 "IC_DMA_CR,DMA Control Register" bitfld.long 0x04 1. " TDMAE ,Transmit DMA Enable" "Disabled,Enabled" bitfld.long 0x04 0. " RDMAE ,Receive DMA Enable" "Disabled,Enabled" line.long 0x08 "IC_DMA_TDLR,DMA Transmit Data Level Register" bitfld.long 0x08 0.--5. " DMATDL ,Transmit Data Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" line.long 0x0C "IC_DMA_RDLR,I2C Receive Data Level Register" bitfld.long 0x0C 0.--5. " DMARD ,Receive Data Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" line.long 0x10 "IC_SDA_SETUP,I2C SDA Setup Register" hexmask.long.byte 0x10 0.--7. 1. " SDA_SETUP ,SDA Setup" line.long 0x14 "IC_ACK_GENERAL_CALL,I2C ACK General Call Register" bitfld.long 0x14 0. " ACK_GEN_CALL ,ACK General Call" "NACK,ACK" rgroup.long 0x9C++0x03 line.long 0x00 "IC_ENABLE_STATUS,I2C Enable Status Register" bitfld.long 0x00 2. " SLV_RX_DATA_LOST ,Slave Received Data Lost" "Not lost,Lost" bitfld.long 0x00 1. " SLV_DISABLED_WHILE_BUSY ,Slave Disabled While Busy" "No,Yes" textline " " bitfld.long 0x00 0. " IC_EN ,Ic_en Status" "Disabled,Enabled" group.long 0xA0++0x03 line.long 0x00 "IC_FS_SPKLEN,I2C SS and FS spike suppression limit" hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN ,Spike Suppression Limit Register" width 23. rgroup.long 0xF4++0x0B line.long 0x00 "IC_COMP_PARAM_1,Component Parameter Register 1" hexmask.long.byte 0x00 16.--23. 1. " TX_BUFFER_DEPTH ,Transmit buffer depth" hexmask.long.byte 0x00 8.--15. 1. " RX_BUFFER_DEPTH ,Receive buffer depth" textline " " bitfld.long 0x00 7. " ADD_ENCODED_PARAMS ,Add Encoded Params" ",True" bitfld.long 0x00 6. " HAS_DMA ,Has DMA" ",True" textline " " bitfld.long 0x00 5. " INTR_IO ,Intr IO" ",Combined" bitfld.long 0x00 4. " HC_COUNT_VALUES ,CNT Registers Access" "Read/Write,?..." textline " " bitfld.long 0x00 2.--3. " MAX_SPEED_MODE ,Max Speed Mode" ",,Fast,?..." bitfld.long 0x00 0.--1. " APB_DATA_WIDTH ,APB Data Width Register" ",,32bits,?..." line.long 0x04 "IC_COMP_VERSION,I2C Component Version Register" line.long 0x08 "IC_COMP_TYPE,I2C Component Type Register" width 0x0B tree.end tree "I2C 3" base ad:0xFFC07000 width 23. group.long 0x00++0x0B line.long 0x00 "IC_CON,I2C Control register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 9. " RX_FIFO_FULL_HLD_CTRL ,I2C Bus Hold on RX FIFO Full" "Disabled,Enabled" bitfld.long 0x00 8. " TX_EMPTY_CTRL ,TX Empty Interrupt Generation" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " STOP_DET_IFADDRESSED ,STOP_DET Interrupt Generation When Adressed Only" "No,Yes" textline " " endif bitfld.long 0x00 6. " IC_SLAVE_DISABLE ,I2C slave disable" "No,Yes" bitfld.long 0x00 5. " IC_RESTART_EN ,Restart enable" "Disabled,Enabled" textline " " sif cpu()=="ARRIA10SOC" rbitfld.long 0x00 4. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x00 3. " IC_10BITADDR_SLAVE ,I2C slave addressing mode" "7-bit,10-bit" textline " " bitfld.long 0x00 1.--2. " SPEED ,I2C operating speed" ",Standard,Fast/Fast plus,High speed" textline " " else bitfld.long 0x00 4. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x00 3. " IC_10BITADDR_SLAVE ,I2C slave addressing mode" "7-bit,10-bit" textline " " bitfld.long 0x00 1.--2. " SPEED ,I2C operating speed" ",Standard,Fast,?..." textline " " endif bitfld.long 0x00 0. " MASTER_MODE ,I2C master enable" "Disabled,Enabled" line.long 0x04 "IC_TAR,I2C Target Address Register" bitfld.long 0x04 12. " IC_10BITADDR_MASTER ,I2C master addressing mode" "7-bit,10-bit" bitfld.long 0x04 11. " SPECIAL ,Special command performing" "Normal,Special" textline " " bitfld.long 0x04 10. " GC_OR_START ,General Call or START BYTE command" "General Call,START BYTE" hexmask.long.word 0x04 0.--9. 1. " IC_TAR ,Target address for master transaction" line.long 0x08 "IC_SAR,I2C Slave Address Register" hexmask.long.word 0x08 0.--9. 1. " IC_SAR ,Slave address" group.long 0x10++0x13 line.long 0x00 "IC_DATA_CMD,I2C Rx/Tx Data Buffer and Command Register" bitfld.long 0x00 10. " RESTART ,Generate Restart" "Not generated,Generated" bitfld.long 0x00 9. " STOP ,Generate Stop" "Not generated,Generated" textline " " bitfld.long 0x00 8. " CMD ,Read/Write performed" "Write,Read" hexmask.long.byte 0x00 0.--7. 1. " DAT ,Data transmitted/received on I2C bus" line.long 0x04 "IC_SS_SCL_HCNT,Standard Speed I2C Clock SCL High Count Register" hexmask.long.word 0x04 0.--15. 1. " IC_SS_SCL_HCNT ,Standard Speed I2C Clock SCL High Count" line.long 0x08 "IC_SS_SCL_LCNT,Standard Speed I2C Clock SCL Low Count Register" hexmask.long.word 0x08 0.--15. 1. " IC_SS_SCL_LCNT ,Standard Speed I2C Clock SCL Low Count" line.long 0x0C "IC_FS_SCL_HCNT,Fast Speed I2C Clock SCL High Count Register" hexmask.long.word 0x0C 0.--15. 1. " IC_FS_SCL_HCNT ,Fast Speed I2C Clock SCL High Count" line.long 0x10 "IC_FS_SCL_LCNT,Fast Speed I2C Clock SCL Low Count Register" hexmask.long.word 0x10 0.--15. 1. " IC_FS_SCL_LCNT ,Fast Speed I2C Clock SCL Low Count" width 23. rgroup.long 0x2C++0x03 line.long 0x00 "IC_INTR_STAT,I2C Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "No interrupt,Interrupt" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "No interrupt,Interrupt" textline " " endif bitfld.long 0x00 11. " R_GEN_CALL ,Generall Call" "No interrupt,Interrupt" bitfld.long 0x00 10. " R_START_DET ,Start detection" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " R_STOP_DET ,Stop detection" "No interrupt,Interrupt" bitfld.long 0x00 8. " R_ACTIVITY ,I2C activity" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " R_RX_DONE ,Receiving done" "No interrupt,Interrupt" bitfld.long 0x00 6. " R_TX_ABRT ,Transmission abort" "No interrupt,Interrupt" textline " " bitfld.long 0x00 5. " R_RD_REQ ,Read requirement" "No interrupt,Interrupt" bitfld.long 0x00 4. " R_TX_EMPTY ,Transmit buffer low" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " R_TX_OVER ,Transmit buffer Overflow" "No interrupt,Interrupt" bitfld.long 0x00 2. " R_RX_FULL ,Receive buffer over treshold" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " R_RX_OVER ,Receive buffer Overflow" "No interrupt,Interrupt" bitfld.long 0x00 0. " R_RX_UNDER ,Receive buffer underrun" "No interrupt,Interrupt" group.long 0x30++0x03 line.long 0x00 "IC_INTR_MASK,I2C Interrupt Mask Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "Masked,Not masked" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "Masked,Not masked" textline " " endif bitfld.long 0x00 11. " M_GEN_CALL ,Generall Call" "Masked,Not masked" bitfld.long 0x00 10. " M_START_DET ,Start detection" "Masked,Not masked" textline " " bitfld.long 0x00 9. " M_STOP_DET ,Stop detection" "Masked,Not masked" bitfld.long 0x00 8. " M_ACTIVITY ,I2C activity" "Masked,Not masked" textline " " bitfld.long 0x00 7. " M_RX_DONE ,Receiving done" "Masked,Not masked" bitfld.long 0x00 6. " M_TX_ABRT ,Transmission abort" "Masked,Not masked" textline " " bitfld.long 0x00 5. " M_RD_REQ ,Read requirement" "Masked,Not masked" bitfld.long 0x00 4. " M_TX_EMPTY ,TX Buffer Empty" "Masked,Not masked" textline " " bitfld.long 0x00 3. " M_TX_OVER ,TX Buffer Overflow" "Masked,Not masked" bitfld.long 0x00 2. " M_RX_FULL ,RX Buffer Full" "Masked,Not masked" textline " " bitfld.long 0x00 1. " M_RX_OVER ,RX Buffer Overflow" "Masked,Not masked" bitfld.long 0x00 0. " M_RX_UNDER ,Mask RX Buffer Underrun" "Masked,Not masked" rgroup.long 0x34++0x03 line.long 0x00 "IC_RAW_INTR_STAT,I2C Raw Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 13. " R_MASTER_ON_HOLD ,TX FIFO Empty and Master Holding Bus" "Not masked,Masked" bitfld.long 0x00 12. " R_RESTART_DET ,RESTART Condition Occurred" "Not masked,Masked" textline " " endif bitfld.long 0x00 11. " GEN_CALL ,Raw Interrupt General Call" "No interrupt,Interrupt" bitfld.long 0x00 10. " START_DET ,Raw Interrupt Start Detect" "No interrupt,Interrupt" textline " " bitfld.long 0x00 9. " STOP_DET ,Raw Interrupt Stop Detect" "No interrupt,Interrupt" bitfld.long 0x00 8. " ACTIVITY ,Raw Interrupt Activity" "No interrupt,Interrupt" textline " " bitfld.long 0x00 7. " RX_DONE ,Raw Interrupt RX Done" "No interrupt,Interrupt" bitfld.long 0x00 6. " TX_ABRT ,Raw Interrupt TX Abort" "No interrupt,Interrupt" textline " " bitfld.long 0x00 5. " RD_REQ ,Raw Interrupt Read Request" "No interrupt,Interrupt" bitfld.long 0x00 4. " TX_EMPTY ,Raw Interrupt TX Empty" "No interrupt,Interrupt" textline " " bitfld.long 0x00 3. " TX_OVER ,Raw Interrupt TX Overflow" "No interrupt,Interrupt" bitfld.long 0x00 2. " RX_FULL ,Raw Interrupt RX Full" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " RX_OVER ,Raw Interrupt RX Overflow" "No interrupt,Interrupt" bitfld.long 0x00 0. " RX_UNDER ,I2C Raw Interrupt RX Underrun" "No interrupt,Interrupt" group.long 0x38++0x07 line.long 0x00 "IC_RX_TL,I2C Receive FIFO Threshold Register" hexmask.long.byte 0x00 0.--7. 1. " RX_TL ,Receive FIFO Threshold Level" line.long 0x04 "IC_TX_TL,I2C Transmit FIFO Threshold Register" hexmask.long.byte 0x04 0.--7. 1. " TX_TL ,Transmit FIFO Threshold Level Controls" hgroup.long 0x40++0x03 hide.long 0x00 "IC_CLR_INTR,Clear Combined and Individual Interrupt Register" in hgroup.long 0x44++0x03 hide.long 0x00 "IC_CLR_RX_UNDER,Clear RX_UNDER Interrupt Register" in hgroup.long 0x48++0x03 hide.long 0x00 "IC_CLR_RX_OVER,Clear RX_OVER Interrupt Register" in hgroup.long 0x4C++0x03 hide.long 0x00 "IC_CLR_TX_OVER,Clear TX_OVER Interrupt Register" in hgroup.long 0x50++0x03 hide.long 0x00 "IC_CLR_RD_REQ,Clear RD_REQ Interrupt Register" in hgroup.long 0x54++0x03 hide.long 0x00 "IC_CLR_TX_ABRT,Clear TX_ABRT Interrupt Register" in hgroup.long 0x58++0x03 hide.long 0x00 "IC_CLR_RX_DONE,Clear RX_DONE Interrupt Register" in hgroup.long 0x5C++0x03 hide.long 0x00 "IC_CLR_ACTIVITY,Clear ACTIVITY Interrupt Register" in hgroup.long 0x60++0x03 hide.long 0x00 "IC_CLR_STOP_DET,Clear STOP_DET Interrupt Register" in hgroup.long 0x64++0x03 hide.long 0x00 "IC_CLR_START_DET,Clear START_DET Interrupt Register" in hgroup.long 0x68++0x03 hide.long 0x00 "IC_CLR_GEN_CALL,Clear GEN_CALL Interrupt Register" in sif cpu()=="ARRIA10SOC" hgroup.long 0xA8++0x03 hide.long 0x00 "IC_CLR_RESTART_DET,Clear RESTART_DET Interrupt Register" in endif group.long 0x6C++0x03 line.long 0x00 "IC_ENABLE,I2C Enable Register" bitfld.long 0x00 1. " TXABORT ,TX abort Bit" "Not aborted,Aborted" bitfld.long 0x00 0. " ENABLE ,Controls whether the I2C is enabled" "Disabled,Enabled" rgroup.long 0x70++0x0B line.long 0x00 "IC_STATUS,I2C Status Register" bitfld.long 0x00 6. " SLV_ACTIVITY ,Slave FSM Activity Status" "Not active,Active" bitfld.long 0x00 5. " MST_ACTIVITY ,Master FSM Activity Status" "Not active,Active" textline " " bitfld.long 0x00 4. " RFF ,Receive FIFO Completely Full" "Not full,Full" bitfld.long 0x00 3. " RFNE ,Receive FIFO Not Empty" "Empty,Not empty" textline " " bitfld.long 0x00 2. " TFE ,Transmit FIFO Completely Empty" "Not empty,Empty" bitfld.long 0x00 1. " TFNF ,Transmit FIFO Not Full" "Full,Not full" textline " " bitfld.long 0x00 0. " ACTIVITY ,I2C Activity Status" "Not active,Active" line.long 0x04 "IC_TXFLR,I2C Transmit FIFO Level Register" hexmask.long.byte 0x04 0.--6. 1. " TXFLR ,Transmit FIFO Level" line.long 0x08 "IC_RXFLR,I2C Receive FIFO Level Register" hexmask.long.byte 0x08 0.--6. 1. " RXFLR ,Receive FIFO Level Bit" width 23. group.long 0x7C++0x03 line.long 0x00 "IC_SDA_HOLD,I2C SDA Hold Register" sif cpu()=="ARRIA10SOC" hexmask.long.byte 0x00 16.--23. 1. " IC_SDA_RX_HOLD ,SDA RX Hold Time" hexmask.long.word 0x00 0.--15. 1. " IC_SDA_TX_HOLD ,SDA TX Hold Time" textline " " else hexmask.long.word 0x00 0.--15. 1. " IC_SDA_HOLD ,SDA Hold Time" endif sif cpu()=="ARRIA10SOC" if (d.l(ad:0xFFC07000)&0x01)==0x01 rgroup.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT ,Flushed TX FIFO Data Commands Count" bitfld.long 0x00 16. " ABRT_USER_ABRT ,User-requested abort" "Not aborted,Aborted" textline " " bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 3. " ABRT_TXDATA_NOACK ,Master has received an acknowledgement for the address (No ack)" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" else rgroup.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" hexmask.long.word 0x00 23.--31. 1. " TX_FLUSH_CNT ,Flushed TX FIFO Data Commands Count" textline " " bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" endif else if (d.l(ad:0xFFC07000)&0x01)==0x01 group.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 3. " ABRT_TXDATA_NOACK ,Master has received an acknowledgement for the address (No ack)" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" else group.long 0x80++0x03 line.long 0x00 "IC_TX_ABRT_SOURCE,I2C Transmit Abort Source Register" bitfld.long 0x00 15. " ABRT_SLVRD_INTX ,Slave mode request for data" "Not requested,Requested" bitfld.long 0x00 14. " ABRT_SLV_ARBLOST ,Slave lost the bus" "Not lost,Lost" textline " " bitfld.long 0x00 13. " ABRT_SLVFLUSH_TXFIFO ,TX FIFO flush after slave has received a read command" "Not flushed,Flushed" bitfld.long 0x00 12. " ARB_LOST , Master has lost arbitration" "Not lost,Lost" textline " " bitfld.long 0x00 11. " ABRT_MASTER_DIS ,User tries to initiate a Master operation with the Master mode disabled" "No,Yes" bitfld.long 0x00 10. " ABRT_10B_RD_NORSTRT ,The restart is disabled" "No,Yes" textline " " bitfld.long 0x00 9. " ABRT_SBYTE_NORSTRT ,The restart is disabled (START Byte send)" "No,Yes" bitfld.long 0x00 8. " ABRT_HS_NORSTRT ,The restart is disabled (High Speed)" "No,Yes" textline " " bitfld.long 0x00 7. " ABRT_SBYTE_ACKDET ,START Byte sent and acknowledged" "Not acknowledged,Acknowledged" bitfld.long 0x00 6. " ABRT_HS_ACKDET ,High Speed Master code was acknowledged" "Not acknowledged,Acknowledged" textline " " bitfld.long 0x00 5. " ABRT_GCALL_READ ,I2C in master mode sent a General Call (Read from bus)" "Not sent,Sent" bitfld.long 0x00 4. " ABRT_GCALL_NOACK ,I2C in master mode sent a General Call (No slave on bus ack)" "Not sent,Sent" textline " " bitfld.long 0x00 2. " ABRT_10ADDR2_NOACK ,Master is in 10-bit address mode and the second address byte of the 10-bit address was not acknowledged" "Acknowledged,Not acknowledged" bitfld.long 0x00 1. " ABRT_10ADDR1_NOACK ,Master is in 10-bit address mode and the first 10-bit address byte was not acknowledged" "Acknowledged,Not acknowledged" textline " " bitfld.long 0x00 0. " ABRT_7B_ADDR_NOACK ,Master is in 7-bit addressing mode and the address sent was not acknowledged" "Acknowledged,Not acknowledged" endif endif group.long 0x84++0x17 line.long 0x00 "IC_SLV_DATA_NACK_ONLY,Generate Slave Data NACK Register" bitfld.long 0x00 0. " NACK ,Generate NACK" "Normally,After data byte" line.long 0x04 "IC_DMA_CR,DMA Control Register" bitfld.long 0x04 1. " TDMAE ,Transmit DMA Enable" "Disabled,Enabled" bitfld.long 0x04 0. " RDMAE ,Receive DMA Enable" "Disabled,Enabled" line.long 0x08 "IC_DMA_TDLR,DMA Transmit Data Level Register" bitfld.long 0x08 0.--5. " DMATDL ,Transmit Data Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" line.long 0x0C "IC_DMA_RDLR,I2C Receive Data Level Register" bitfld.long 0x0C 0.--5. " DMARD ,Receive Data Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" line.long 0x10 "IC_SDA_SETUP,I2C SDA Setup Register" hexmask.long.byte 0x10 0.--7. 1. " SDA_SETUP ,SDA Setup" line.long 0x14 "IC_ACK_GENERAL_CALL,I2C ACK General Call Register" bitfld.long 0x14 0. " ACK_GEN_CALL ,ACK General Call" "NACK,ACK" rgroup.long 0x9C++0x03 line.long 0x00 "IC_ENABLE_STATUS,I2C Enable Status Register" bitfld.long 0x00 2. " SLV_RX_DATA_LOST ,Slave Received Data Lost" "Not lost,Lost" bitfld.long 0x00 1. " SLV_DISABLED_WHILE_BUSY ,Slave Disabled While Busy" "No,Yes" textline " " bitfld.long 0x00 0. " IC_EN ,Ic_en Status" "Disabled,Enabled" group.long 0xA0++0x03 line.long 0x00 "IC_FS_SPKLEN,I2C SS and FS spike suppression limit" hexmask.long.byte 0x00 0.--7. 1. " IC_FS_SPKLEN ,Spike Suppression Limit Register" width 23. rgroup.long 0xF4++0x0B line.long 0x00 "IC_COMP_PARAM_1,Component Parameter Register 1" hexmask.long.byte 0x00 16.--23. 1. " TX_BUFFER_DEPTH ,Transmit buffer depth" hexmask.long.byte 0x00 8.--15. 1. " RX_BUFFER_DEPTH ,Receive buffer depth" textline " " bitfld.long 0x00 7. " ADD_ENCODED_PARAMS ,Add Encoded Params" ",True" bitfld.long 0x00 6. " HAS_DMA ,Has DMA" ",True" textline " " bitfld.long 0x00 5. " INTR_IO ,Intr IO" ",Combined" bitfld.long 0x00 4. " HC_COUNT_VALUES ,CNT Registers Access" "Read/Write,?..." textline " " bitfld.long 0x00 2.--3. " MAX_SPEED_MODE ,Max Speed Mode" ",,Fast,?..." bitfld.long 0x00 0.--1. " APB_DATA_WIDTH ,APB Data Width Register" ",,32bits,?..." line.long 0x04 "IC_COMP_VERSION,I2C Component Version Register" line.long 0x08 "IC_COMP_TYPE,I2C Component Type Register" width 0x0B tree.end tree.end tree.open "SPTIMER (SP Timer Module)" tree "SPTIMER 0" base ad:0xFFC08000 width 20. group.long 0x00++0x03 "Timer 1" line.long 0x00 "TIMER1LOADCOUNT,Timer1 Load Count Register" rgroup.long 0x04++0x03 line.long 0x00 "TIMER1CURRENTVALUE,Timer1 Current Value Register" group.long 0x08++0x03 line.long 0x00 "TIMER1CONTROLREG,Timer1 Control Register" bitfld.long 0x00 2. " T_INT_MASK ,Timer interrupt mask for Timer1" "Not masked,Masked" textline " " bitfld.long 0x00 1. " T_MODE ,Timer mode for Timer1" "Free-running,User-defined" bitfld.long 0x00 0. " T_EN ,Timer enable bit for Timer1" "Disabled,Enabled" hgroup.long 0x0c++0x03 hide.long 0x00 "TIMER1EOI,Timer1 End-of-Interrupt Register" in rgroup.long 0x10++0x03 line.long 0x00 "TIMER1INTSTATUS,Timer1 Interrupt Status Register" bitfld.long 0x00 0. " T1INTSTS ,Interrupt status for Timer1" "No interrupt,Interrupt" rgroup.long 0xa0++0x03 "Common Registers" line.long 0x00 "TIMERSINTSTATUS,Timers Interrupt Status Register" bitfld.long 0x00 0. " TSINTSTS[0] ,Interrupt status for Timer1" "No interrupt,Interrupt" hgroup.long 0xa4++0x03 hide.long 0x00 "TIMERSEOI,Timers End-of-Interrupt Register" in rgroup.long 0xa8++0x03 line.long 0x00 "TIMERSRAWINTSTATUS,Timers Raw Interrupt Status Register" bitfld.long 0x00 0. " TIMERSRAWINTSTAT ,Timers Raw Interrupt Status" "Not active,Active" rgroup.long 0xAC++0x03 line.long 0x00 "TIMERSCOMPVERSION,Timers Component Version" width 0x0B tree.end tree "SPTIMER 1" base ad:0xFFC09000 width 20. group.long 0x00++0x03 "Timer 1" line.long 0x00 "TIMER1LOADCOUNT,Timer1 Load Count Register" rgroup.long 0x04++0x03 line.long 0x00 "TIMER1CURRENTVALUE,Timer1 Current Value Register" group.long 0x08++0x03 line.long 0x00 "TIMER1CONTROLREG,Timer1 Control Register" bitfld.long 0x00 2. " T_INT_MASK ,Timer interrupt mask for Timer1" "Not masked,Masked" textline " " bitfld.long 0x00 1. " T_MODE ,Timer mode for Timer1" "Free-running,User-defined" bitfld.long 0x00 0. " T_EN ,Timer enable bit for Timer1" "Disabled,Enabled" hgroup.long 0x0c++0x03 hide.long 0x00 "TIMER1EOI,Timer1 End-of-Interrupt Register" in rgroup.long 0x10++0x03 line.long 0x00 "TIMER1INTSTATUS,Timer1 Interrupt Status Register" bitfld.long 0x00 0. " T1INTSTS ,Interrupt status for Timer1" "No interrupt,Interrupt" rgroup.long 0xa0++0x03 "Common Registers" line.long 0x00 "TIMERSINTSTATUS,Timers Interrupt Status Register" bitfld.long 0x00 0. " TSINTSTS[0] ,Interrupt status for Timer1" "No interrupt,Interrupt" hgroup.long 0xa4++0x03 hide.long 0x00 "TIMERSEOI,Timers End-of-Interrupt Register" in rgroup.long 0xa8++0x03 line.long 0x00 "TIMERSRAWINTSTATUS,Timers Raw Interrupt Status Register" bitfld.long 0x00 0. " TIMERSRAWINTSTAT ,Timers Raw Interrupt Status" "Not active,Active" rgroup.long 0xAC++0x03 line.long 0x00 "TIMERSCOMPVERSION,Timers Component Version" width 0x0B tree.end tree.end tree "SDR (SDRAM Controller)" base ad:0xFFC20000 width 17. group.long 0x5000++0x1B line.long 0x00 "CTRLCFG,Controller Configuration Register" bitfld.long 0x00 25. " BURSTTERMEN ,Burst Terminate Enable" "Disabled,Enabled" bitfld.long 0x00 24. " BURSTINTREN ,Burst Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 23. " NODMPINS ,No DM Pins Present" "Disabled,Enabled" textline " " bitfld.long 0x00 22. " DQSTRKEN ,DQS Tracking Enable" "Disabled,Enabled" bitfld.long 0x00 16.--21. " STARVELIMIT ,Starvation Limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. " REORDEREN ,Command Reorder Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 14. " GENDBE ,Generate Double Bit Errors" "Disabled,Enabled" bitfld.long 0x00 13. " GENSBE ,Generate Single Bit Errors" "Disabled,Enabled" bitfld.long 0x00 12. " CFG_ENABLE_ECC_CODE_OVERWRITES ,ECC overwrites" "Disabled,Enabled" textline " " bitfld.long 0x00 11. " ECCCORREN ,ECC Auto-Correction Enable" "Disabled,Enabled" bitfld.long 0x00 10. " ECCEN ,ECC Enable" "Disabled,Enabled" bitfld.long 0x00 8.--9. " ADDRORDER ,Address Interleaving Order" "Chip-row-bank-column,Chip-bank-row-column,Row-chip-bank-column,?..." textline " " bitfld.long 0x00 3.--7. " MEMBL ,DRAM Memory Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--2. " MEMTYPE ,DRAM Memory Type" "Reserved,DDR2 SDRAM,DDR3 SDRAM,LPDDR1 SDRAM,LPDDR2 SDRAM,?..." line.long 0x04 "DRAMTIMING1,DRAM Timings 1 Register" hexmask.long.byte 0x04 24.--31. 1. " TRFC ,Refresh Cycle Time" bitfld.long 0x04 18.--23. " TFAW ,Four Activate Window Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x04 14.--17. " TRRD ,Activate to Activate Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x04 9.--13. " TCL ,CAS Read Latency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x04 4.--8. " TAL ,Additive Latency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x04 0.--3. " TCWL ,CAS Write Latency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "DRAMTIMING2,DRAM Timings 2 Register" bitfld.long 0x08 25.--28. " TWTR ,Write to Read Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x08 21.--24. " TWR ,Write Recovery Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x08 17.--20. " TRP ,Row Precharge Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x08 13.--16. " TRCD ,Activate to Read or Write Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x08 0.--12. 1. " TREFI ,Refresh Interval" line.long 0x0C "DRAMTIMING3,DRAM Timings 3 Register" bitfld.long 0x0C 19.--22. " TCCD ,CAS to CAS Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0C 15.--18. " TMRD ,Mode Register Programming Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0C 9.--14. " TRC ,Row Cycle Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" textline " " bitfld.long 0x0C 4.--8. " TRAS ,Activate to Precharge Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x0C 0.--3. " TRTP ,Read to Precharge Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x10 "DRAMTIMING4,DRAM Timings 4 Register" bitfld.long 0x10 20.--23. " MINPWRSAVECYCLES ,Minimum Low Power State Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x10 10.--19. 1. " PWRDOWNEXIT ,Power Down Exit" hexmask.long.word 0x10 0.--9. 1. " SELFRFSHEXIT ,Self-refresh Exit" line.long 0x14 "LOWPWRTIMING,Lower Power Timing Register" bitfld.long 0x14 16.--19. " CLKDISABLECYCLES ,Clock Disable Delay Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x14 0.--15. 1. " AUTOPDCYCLES ,Auto-power Down Cycles" line.long 0x18 "DRAMODT,ODT Control Register" bitfld.long 0x18 4.--7. " CFG_READ_ODT_CHIP ,Read ODT Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x18 0.--3. " CFG_WRITE_ODT_CHIP ,Write ODT Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x502C++0x33 line.long 0x00 "DRAMADDRW,DRAM Address Widths Register" bitfld.long 0x00 13.--15. " CSBITS ,DRAM Chip Address Bits" "0,1,2,3,4,5,6,7" bitfld.long 0x00 10.--12. " BANKBITS ,DRAM Bank Address Bits" "0,1,2,3,4,5,6,7" bitfld.long 0x00 5.--9. " ROWBITS ,DRAM Row Address Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--4. " COLBITS ,DRAM Column Address Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" line.long 0x04 "DRAMIFWIDTH,DRAM Interface Data Width Register" hexmask.long.byte 0x04 0.--7. 1. " IFWIDTH ,DRAM Interface Data Width" line.long 0x08 "DRAMDEVWIDTH,DRAM Devices Data Width Register" bitfld.long 0x08 0.--3. " DEVWIDTH ,DRAM Devices Data Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x0C "DRAMSTS,DRAM Status Register" bitfld.long 0x0C 4. " CORRDROP ,ECC Auto-Correction Dropped" "Not dropped,Dropped" bitfld.long 0x0C 3. " DBEERR ,Double Bit Error Seen" "No error,Error" bitfld.long 0x0C 2. " SBEERR ,Single Bit Error Seen" "No error,Error" textline " " bitfld.long 0x0C 1. " CALFAIL ,PHY Calibration Failed" "No error,Error" bitfld.long 0x0C 0. " CALSUCCESS ,PHY Calibration Successful" "Not completed,Completed" line.long 0x10 "DRAMINTR,ECC Interrupt Register" bitfld.long 0x10 4. " INTRCLR ,Clear Interrupt Signal" "No interrupt,Interrupt" bitfld.long 0x10 3. " CORRDROPMASK ,Mask Dropped Auto-correction Interrupt" "No interrupt,Interrupt" bitfld.long 0x10 2. " DBEMASK ,Mask Double Bit Error Interrupt" "No interrupt,Interrupt" textline " " bitfld.long 0x10 1. " SBEMASK ,Mask Single Bit Error Interrupt" "No interrupt,Interrupt" bitfld.long 0x10 0. " INTREN ,Interrupt Enable" "Disabled,Enabled" line.long 0x14 "SBECOUNT,ECC Single Bit Error Count Register" hexmask.long.byte 0x14 0.--7. 1. " COUNT ,Single Bit Error Count" line.long 0x18 "DBECOUNT,ECC Double Bit Error Count Register" hexmask.long.byte 0x18 0.--7. 1. " COUNT ,Double Bit Error Count" line.long 0x1C "ERRADDR,ECC Error Address Register" line.long 0x20 "DROPCOUNT,ECC Auto-correction Dropped Count Register" hexmask.long.byte 0x20 0.--7. 1. " CORRDROPCOUNT ,Dropped Auto-correction Count" line.long 0x24 "DROPADDR,ECC Auto-correction Dropped Address Register" line.long 0x28 "LOWPWREQ,Low Power Control Register" bitfld.long 0x28 4.--5. " SELFRFSHMASK ,Self-refresh Chip Select Mask" "0,1,2,3" bitfld.long 0x28 3. " SELFRSHREQ ,Self-refresh Request" "Not requested,Requested" bitfld.long 0x28 1.--2. " DEEPPWRDNMASK ,Deep Power Down Chip Select Mask" "0,1,2,3" textline " " bitfld.long 0x28 0. " DEEPPWRDNREQ ,Deep Power Down Request" "Not requested,Requested" line.long 0x2C "LOWPWRACK,Low Power Acknowledge Register" bitfld.long 0x2C 1. " SELFRFSHACK ,Self-refresh Acknowledge" "Not acknowledged,Acknowledged" bitfld.long 0x2C 0. " DEEPPWRDNACK ,Deep Power Down Acknowledge" "Not acknowledged,Acknowledged" line.long 0x30 "STATICCFG,Static Configuration Register" bitfld.long 0x30 3. " APPLYCFG ,Apply Configuration Changes" "Not applied,Applied" bitfld.long 0x30 2. " USEECCASDATA ,Use ECC Bits As Data" "Disabled,Enabled" bitfld.long 0x30 0.--1. " MEMBL ,Memory Burst Length" "2,4,8,?..." if (((d.l(ad:0xFFC20000+0x5000))&0x400)==0x400) group.long 0x5060++0x3 line.long 0x00 "CTRLWIDTH,Memory Controller Width Register" bitfld.long 0x00 0.--1. " CTRLWIDTH ,Controller Interface Width" "8-bit,24-bit,40-bit,?..." else group.long 0x5060++0x3 line.long 0x00 "CTRLWIDTH,Memory Controller Width Register" bitfld.long 0x00 0.--1. " CTRLWIDTH ,Controller Interface Width" "8-bit,16-bit,32-bit,?..." endif group.long 0x507C++0x7 line.long 0x00 "PORTCFG,Port Configuration Register" bitfld.long 0x00 19. " AUTOPCHEN9 ,Auto-precharge Enable 9" "Disabled,Enabled" bitfld.long 0x00 18. " AUTOPCHEN8 ,Auto-precharge Enable 8" "Disabled,Enabled" bitfld.long 0x00 17. " AUTOPCHEN7 ,Auto-precharge Enable 7" "Disabled,Enabled" textline " " bitfld.long 0x00 16. " AUTOPCHEN6 ,Auto-precharge Enable 6" "Disabled,Enabled" bitfld.long 0x00 15. " AUTOPCHEN5 ,Auto-precharge Enable 5" "Disabled,Enabled" bitfld.long 0x00 14. " AUTOPCHEN4 ,Auto-precharge Enable 4" "Disabled,Enabled" textline " " bitfld.long 0x00 13. " AUTOPCHEN3 ,Auto-precharge Enable 3" "Disabled,Enabled" bitfld.long 0x00 12. " AUTOPCHEN2 ,Auto-precharge Enable 2" "Disabled,Enabled" bitfld.long 0x00 11. " AUTOPCHEN1 ,Auto-precharge Enable 1" "Disabled,Enabled" textline " " bitfld.long 0x00 10. " AUTOPCHEN0 ,Auto-precharge Enable 0" "Disabled,Enabled" line.long 0x04 "FPGAPORTRST,FPGA Ports Reset Control Register" hexmask.long.word 0x04 0.--13. 1. " PORTRSTN ,Port Reset Control" group.long 0x508C++0x33 line.long 0x00 "PROTPORTDEFAULT,Memory Protection Port Default Register" hexmask.long.word 0x00 0.--9. 1. " PORTDEFAULT ,Port Default Action" line.long 0x04 "PROTRULEADDR,Memory Protection Address Register" hexmask.long.tbyte 0x04 12.--23. 0x1000 " HIGHADDR ,High Address" hexmask.long.word 0x04 0.--11. 1. " LOWADDR ,Low Address" line.long 0x08 "PROTRULEID,Memory Protection ID Register" hexmask.long.word 0x08 12.--23. 1. " HIGHOD ,High ID" hexmask.long.word 0x08 0.--11. 1. " LOWID ,Low ID" line.long 0x0C "PROTRULEDATA,Memory Protection Rule Data Register" bitfld.long 0x0C 13. " RULERESULT ,Rule Results" "Allowed,Not allowed" hexmask.long.word 0x0C 3.--12. 1. " PORTMASK ,Port Mask" bitfld.long 0x0C 2. " VALIDRULE ,Valid Rule" "Not valid,Valid" textline " " bitfld.long 0x0C 0.--1. " SECURITY ,Security Bit Behavior" "Secure transactions,Non-secure transactions,Both,Both" line.long 0x10 "PROTRULERDWR,Memory Protection Rule Read-Write Register" bitfld.long 0x10 6. " READRULE ,Rule Read" "Disabled,Enabled" bitfld.long 0x10 5. " WRITERULE ,Rule Write " "Disabled,Enabled" bitfld.long 0x10 0.--4. " RULEOFFSET ,Rule Offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" line.long 0x14 "QOSLOWPRI,QOS Control Register" hexmask.long.tbyte 0x14 0.--19. 1. " LOWPRIORITYVAL ,Low Priority QoS Value" line.long 0x18 "QOSHIGHPRI,Qoshighpri Register" hexmask.long.tbyte 0x18 0.--19. 1. " HIGHPRIORITYVAL ,High Priority QoS Value" line.long 0x1C "QOSPRIORITYEN,Qospriorityen Register" bitfld.long 0x1C 9. " PRIORITYEN9 ,Per-Port 9 QoS Enable" "Disabled,Enabled" bitfld.long 0x1C 8. " PRIORITYEN8 ,Per-Port 8 QoS Enable" "Disabled,Enabled" bitfld.long 0x1C 7. " PRIORITYEN7 ,Per-Port 7 QoS Enable" "Disabled,Enabled" textline " " bitfld.long 0x1C 6. " PRIORITYEN6 ,Per-Port 6 QoS Enable" "Disabled,Enabled" bitfld.long 0x1C 5. " PRIORITYEN5 ,Per-Port 5 QoS Enable" "Disabled,Enabled" bitfld.long 0x1C 4. " PRIORITYEN4 ,Per-Port 4 QoS Enable" "Disabled,Enabled" textline " " bitfld.long 0x1C 3. " PRIORITYEN3 ,Per-Port 3 QoS Enable" "Disabled,Enabled" bitfld.long 0x1C 2. " PRIORITYEN2 ,Per-Port 2 QoS Enable" "Disabled,Enabled" bitfld.long 0x1C 1. " PRIORITYEN1 ,Per-Port 1 QoS Enable" "Disabled,Enabled" textline " " bitfld.long 0x1C 0. " PRIORITYEN0 ,Per-Port 0 QoS Enable" "Disabled,Enabled" line.long 0x20 "MPPRIORITY,Scheduler priority Register" bitfld.long 0x20 27.--29. " USERPRIORITY9 ,Port 9 User Priorities" "Lowest,1,2,3,4,5,6,Highest" bitfld.long 0x20 24.--26. " USERPRIORITY8 ,Port 8 User Priorities" "Lowest,1,2,3,4,5,6,Highest" bitfld.long 0x20 21.--23. " USERPRIORITY7 ,Port 7 User Priorities" "Lowest,1,2,3,4,5,6,Highest" textline " " bitfld.long 0x20 18.--20. " USERPRIORITY6 ,Port 6 User Priorities" "Lowest,1,2,3,4,5,6,Highest" bitfld.long 0x20 15.--17. " USERPRIORITY5 ,Port 5 User Priorities" "Lowest,1,2,3,4,5,6,Highest" bitfld.long 0x20 12.--14. " USERPRIORITY4 ,Port 4 User Priorities" "Lowest,1,2,3,4,5,6,Highest" textline " " bitfld.long 0x20 9.--11. " USERPRIORITY3 ,Port 3 User Priorities" "Lowest,1,2,3,4,5,6,Highest" bitfld.long 0x20 6.--8. " USERPRIORITY2 ,Port 2 User Priorities" "Lowest,1,2,3,4,5,6,Highest" bitfld.long 0x20 3.--5. " USERPRIORITY1 ,Port 1 User Priorities" "Lowest,1,2,3,4,5,6,Highest" textline " " bitfld.long 0x20 0.--2. " USERPRIORITY0 ,Port 0 User Priorities" "Lowest,1,2,3,4,5,6,Highest" line.long 0x24 "MPWEIGHT_0,Port Sum of Weight Register[1/4]" bitfld.long 0x24 30.--31. " SUMOFWEIGHTS6 ,Port 6 Static Weights" "0,1,2,3" bitfld.long 0x24 25.--29. " SUMOFWEIGHTS5 ,Port 5 Static Weights" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x24 20.--24. " SUMOFWEIGHTS4 ,Port 4 Static Weights" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x24 15.--19. " SUMOFWEIGHTS3 ,Port 3 Static Weights" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x24 10.--14. " SUMOFWEIGHTS2 ,Port 2 Static Weights" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x24 5.--9. " SUMOFWEIGHTS1 ,Port 1 Static Weights" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x24 0.--4. " SUMOFWEIGHTS0 ,Port 0 Static Weights" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" line.long 0x28 "MPWEIGHT_1,Port Sum of Weight Register[2/4]" hexmask.long.tbyte 0x28 13.--31. 1. " STATICWEIGHT ,Port Sum of Weights" bitfld.long 0x28 8.--12. " SUMOFWEIGHTS9 ,Port 9 Static Weights" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x28 3.--7. " SUMOFWEIGHTS8 ,Port 8 Static Weights" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x28 0.--2. " SUMOFWEIGHTS7 ,Port 7 Static Weights" "0,1,2,3,4,5,6,7" line.long 0x2C "MPWEIGHT_2,Port Sum of Weight Register[3/4]" line.long 0x30 "MPWEIGHT_4,Port Sum of Weight Register[4/4]" hexmask.long.tbyte 0x30 0.--17. 1. " STATICWEIGHT ,Port Sum of Weights" group.long 0x50E0++0x3 line.long 0x00 "REMAPPRIORITY,Controller Command Pool Priority Remap Register" hexmask.long.byte 0x00 0.--7. 1. " PRIORITYREMAP ,Priority Remap" width 0xB tree.end tree.open "OSCTIMER (OSC Timer Module)" tree "OSC1 Timer 0" base ad:0xFFD00000 width 20. group.long 0x00++0x03 "Timer 1" line.long 0x00 "TIMER1LOADCOUNT,Timer1 Load Count Register" rgroup.long 0x04++0x03 line.long 0x00 "TIMER1CURRENTVALUE,Timer1 Current Value Register" group.long 0x08++0x03 line.long 0x00 "TIMER1CONTROLREG,Timer1 Control Register" bitfld.long 0x00 2. " T_INT_MASK ,Timer interrupt mask for Timer1" "Not masked,Masked" textline " " bitfld.long 0x00 1. " T_MODE ,Timer mode for Timer1" "Free-running,User-defined" bitfld.long 0x00 0. " T_EN ,Timer enable bit for Timer1" "Disabled,Enabled" hgroup.long 0x0c++0x03 hide.long 0x00 "TIMER1EOI,Timer1 End-of-Interrupt Register" in rgroup.long 0x10++0x03 line.long 0x00 "TIMER1INTSTATUS,Timer1 Interrupt Status Register" bitfld.long 0x00 0. " T1INTSTS ,Interrupt status for Timer1" "No interrupt,Interrupt" rgroup.long 0xa0++0x03 "Common Registers" line.long 0x00 "TIMERSINTSTATUS,Timers Interrupt Status Register" bitfld.long 0x00 0. " TSINTSTS[0] ,Interrupt status for Timer1" "No interrupt,Interrupt" hgroup.long 0xa4++0x03 hide.long 0x00 "TIMERSEOI,Timers End-of-Interrupt Register" in rgroup.long 0xa8++0x03 line.long 0x00 "TIMERSRAWINTSTATUS,Timers Raw Interrupt Status Register" bitfld.long 0x00 0. " TIMERSRAWINTSTAT ,Timers Raw Interrupt Status" "Not active,Active" rgroup.long 0xAC++0x03 line.long 0x00 "TIMERSCOMPVERSION,Timers Component Version" width 0x0B tree.end tree "OSC1 Timer 1" base ad:0xFFD01000 width 20. group.long 0x00++0x03 "Timer 1" line.long 0x00 "TIMER1LOADCOUNT,Timer1 Load Count Register" rgroup.long 0x04++0x03 line.long 0x00 "TIMER1CURRENTVALUE,Timer1 Current Value Register" group.long 0x08++0x03 line.long 0x00 "TIMER1CONTROLREG,Timer1 Control Register" bitfld.long 0x00 2. " T_INT_MASK ,Timer interrupt mask for Timer1" "Not masked,Masked" textline " " bitfld.long 0x00 1. " T_MODE ,Timer mode for Timer1" "Free-running,User-defined" bitfld.long 0x00 0. " T_EN ,Timer enable bit for Timer1" "Disabled,Enabled" hgroup.long 0x0c++0x03 hide.long 0x00 "TIMER1EOI,Timer1 End-of-Interrupt Register" in rgroup.long 0x10++0x03 line.long 0x00 "TIMER1INTSTATUS,Timer1 Interrupt Status Register" bitfld.long 0x00 0. " T1INTSTS ,Interrupt status for Timer1" "No interrupt,Interrupt" rgroup.long 0xa0++0x03 "Common Registers" line.long 0x00 "TIMERSINTSTATUS,Timers Interrupt Status Register" bitfld.long 0x00 0. " TSINTSTS[0] ,Interrupt status for Timer1" "No interrupt,Interrupt" hgroup.long 0xa4++0x03 hide.long 0x00 "TIMERSEOI,Timers End-of-Interrupt Register" in rgroup.long 0xa8++0x03 line.long 0x00 "TIMERSRAWINTSTATUS,Timers Raw Interrupt Status Register" bitfld.long 0x00 0. " TIMERSRAWINTSTAT ,Timers Raw Interrupt Status" "Not active,Active" rgroup.long 0xAC++0x03 line.long 0x00 "TIMERSCOMPVERSION,Timers Component Version" width 0x0B tree.end tree.end tree.open "LRWD (L4 Watchdog Module)" tree "Watchdog 0" base ad:0xFFD02000 width 26. group.long 0x00++0x07 line.long 0x00 "WDT_CR,Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 2.--4. " RPL ,Reset Pulse Length (pclk cycles)" "2,4,8,16,32,64,128,256" textline " " endif bitfld.long 0x00 1. " RMOD ,Response Mode" "Reset,Interrupt then reset" bitfld.long 0x00 0. " WDT_EN ,Enable" "Disabled,Enabled" line.long 0x04 "WDT_TORR,Timeout Range Register" bitfld.long 0x04 4.--7. " TOP_INIT ,Timeout Period for Initialization" "64K,128K,256K,512K,1M,2M,4M,8M,16M,32M,64M,128M,256M,512M,1G,2G" bitfld.long 0x04 0.--3. " TOP ,Timeout Period" "64K,128K,256K,512K,1M,2M,4M,8M,16M,32M,64M,128M,256M,512M,1G,2G" rgroup.long 0x08++0x03 line.long 0x00 "WDT_CCVR,Current Counter Value Register" wgroup.long 0x0C++0x03 line.long 0x00 "WDT_CRR,Counter Restart Register" hexmask.long.byte 0x00 0.--7. 1. " WDT_CRR ,Counter Restart Register" rgroup.long 0x10++0x07 line.long 0x00 "WDT_STAT,Interrupt Status Register" bitfld.long 0x00 0. " WDT_STAT ,Interrupt Status" "Not activated,Activated" line.long 0x04 "WDT_EOI,Interrupt Clear Register" bitfld.long 0x04 0. " WDT_EOI ,Interrupt Clear" "Not cleared,Cleared" rgroup.long 0xE4++0x1B line.long 0x00 "CP_WDT_USER_TOP_MAX,Component Parameters Register 5" line.long 0x04 "CP_WDT_USER_TOP_INIT_MAX,Component Parameters Register 4" line.long 0x08 "CD_WDT_TOP_RST,Component Parameters Register 3" line.long 0x0C "CP_WDT_CNT_RST,Component Parameters Register 2" line.long 0x10 "WDT_COMP_PARAM_1,Component Parameters Register 1" bitfld.long 0x10 24.--28. " CP_WDT_CNT_WIDTH ,Counter Width in Bits" ",,,,,,,,,,,,,,,,32 bits,?..." bitfld.long 0x10 20.--23. " CP_WDT_DFLT_TOP_INIT ,Default Initial Timeout Period" "64K,128K,256K,512K,1M,2M,4M,8M,16M,32M,64M,128M,256M,512M,1G,2G" bitfld.long 0x10 16.--19. " CP_WDT_DFLT_TOP ,Default Timeout Period" "64K,128K,256K,512K,1M,2M,4M,8M,16M,32M,64M,128M,256M,512M,1G,2G" textline " " bitfld.long 0x10 10.--12. " CP_WDT_DFLT_RPL ,Default Reset Pulse Length" "2 cycles,?..." bitfld.long 0x10 8.--9. " CP_WDT_APB_DATA_WIDTH ,APB Data Width" ",,32 bits,?..." bitfld.long 0x10 7. " CP_WDT_PAUSE ,Include Pause Input" "Not included,Included" textline " " bitfld.long 0x10 6. " CP_WDT_USE_FIX_TOP ,Use Pre-defined (Fixed) Timeout Values" "No,Yes" bitfld.long 0x10 5. " CP_WDT_HC_TOP ,Hardcode Timeout Period" "Programmable,Hardcoded" bitfld.long 0x10 4. " CP_WDT_HC_RPL ,Hardcode Reset Pulse Length" "Programmable,Hardcoded" textline " " bitfld.long 0x10 3. " CP_WDT_HC_RMOD ,Hardcode Response Mode" "Programmable,Hardcoded" bitfld.long 0x10 2. " CP_WDT_DUAL_TOP ,Dual Timeout Period" "Disabled,Enabled" bitfld.long 0x10 1. " CP_WDT_DFLT_RMOD ,Default Mode" "Reset request,?..." textline " " bitfld.long 0x10 0. " CP_WDT_ALWAYS_EN ,Always Enable" "Disabled,Enabled" line.long 0x14 "WDT_COMP_VERSION,Component Version Register" line.long 0x18 "WDT_COMP_TYPE,Component Type Register" width 0x0B tree.end tree "Watchdog 1" base ad:0xFFD03000 width 26. group.long 0x00++0x07 line.long 0x00 "WDT_CR,Control Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 2.--4. " RPL ,Reset Pulse Length (pclk cycles)" "2,4,8,16,32,64,128,256" textline " " endif bitfld.long 0x00 1. " RMOD ,Response Mode" "Reset,Interrupt then reset" bitfld.long 0x00 0. " WDT_EN ,Enable" "Disabled,Enabled" line.long 0x04 "WDT_TORR,Timeout Range Register" bitfld.long 0x04 4.--7. " TOP_INIT ,Timeout Period for Initialization" "64K,128K,256K,512K,1M,2M,4M,8M,16M,32M,64M,128M,256M,512M,1G,2G" bitfld.long 0x04 0.--3. " TOP ,Timeout Period" "64K,128K,256K,512K,1M,2M,4M,8M,16M,32M,64M,128M,256M,512M,1G,2G" rgroup.long 0x08++0x03 line.long 0x00 "WDT_CCVR,Current Counter Value Register" wgroup.long 0x0C++0x03 line.long 0x00 "WDT_CRR,Counter Restart Register" hexmask.long.byte 0x00 0.--7. 1. " WDT_CRR ,Counter Restart Register" rgroup.long 0x10++0x07 line.long 0x00 "WDT_STAT,Interrupt Status Register" bitfld.long 0x00 0. " WDT_STAT ,Interrupt Status" "Not activated,Activated" line.long 0x04 "WDT_EOI,Interrupt Clear Register" bitfld.long 0x04 0. " WDT_EOI ,Interrupt Clear" "Not cleared,Cleared" rgroup.long 0xE4++0x1B line.long 0x00 "CP_WDT_USER_TOP_MAX,Component Parameters Register 5" line.long 0x04 "CP_WDT_USER_TOP_INIT_MAX,Component Parameters Register 4" line.long 0x08 "CD_WDT_TOP_RST,Component Parameters Register 3" line.long 0x0C "CP_WDT_CNT_RST,Component Parameters Register 2" line.long 0x10 "WDT_COMP_PARAM_1,Component Parameters Register 1" bitfld.long 0x10 24.--28. " CP_WDT_CNT_WIDTH ,Counter Width in Bits" ",,,,,,,,,,,,,,,,32 bits,?..." bitfld.long 0x10 20.--23. " CP_WDT_DFLT_TOP_INIT ,Default Initial Timeout Period" "64K,128K,256K,512K,1M,2M,4M,8M,16M,32M,64M,128M,256M,512M,1G,2G" bitfld.long 0x10 16.--19. " CP_WDT_DFLT_TOP ,Default Timeout Period" "64K,128K,256K,512K,1M,2M,4M,8M,16M,32M,64M,128M,256M,512M,1G,2G" textline " " bitfld.long 0x10 10.--12. " CP_WDT_DFLT_RPL ,Default Reset Pulse Length" "2 cycles,?..." bitfld.long 0x10 8.--9. " CP_WDT_APB_DATA_WIDTH ,APB Data Width" ",,32 bits,?..." bitfld.long 0x10 7. " CP_WDT_PAUSE ,Include Pause Input" "Not included,Included" textline " " bitfld.long 0x10 6. " CP_WDT_USE_FIX_TOP ,Use Pre-defined (Fixed) Timeout Values" "No,Yes" bitfld.long 0x10 5. " CP_WDT_HC_TOP ,Hardcode Timeout Period" "Programmable,Hardcoded" bitfld.long 0x10 4. " CP_WDT_HC_RPL ,Hardcode Reset Pulse Length" "Programmable,Hardcoded" textline " " bitfld.long 0x10 3. " CP_WDT_HC_RMOD ,Hardcode Response Mode" "Programmable,Hardcoded" bitfld.long 0x10 2. " CP_WDT_DUAL_TOP ,Dual Timeout Period" "Disabled,Enabled" bitfld.long 0x10 1. " CP_WDT_DFLT_RMOD ,Default Mode" "Reset request,?..." textline " " bitfld.long 0x10 0. " CP_WDT_ALWAYS_EN ,Always Enable" "Disabled,Enabled" line.long 0x14 "WDT_COMP_VERSION,Component Version Register" line.long 0x18 "WDT_COMP_TYPE,Component Type Register" width 0x0B tree.end tree.end tree "CLKMGR (Clock Manager Module)" base ad:0xFFD04000 width 8. tree "General registers" group.long 0x00++0x13 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 2. " ENSFMDWR ,Enable SafeMode on Warm Reset" "Disabled,Enabled" eventfld.long 0x00 0. " SAFEMODE ,Safe Mode" "Disabled,Enabled" line.long 0x04 "BYPASS,PLL Bypass Register" bitfld.long 0x04 4. " PERPLLSRC ,Peripheral PLL Bypass Source" "EOSC1,PLL Input Mux" bitfld.long 0x04 3. " PERPLL ,Peripheral PLL Bypass" "Not bypassed,Bypassed" bitfld.long 0x04 2. " SDRPLLSRC ,SDRAM PLL Bypass Source" "EOSC1,PLL Input Mux" textline " " bitfld.long 0x04 1. " SDRPLL ,SDRAM PLL Bypass" "Not bypassed,Bypassed" bitfld.long 0x04 0. " MAINPLL ,Main PLL Bypass" "Not bypassed,Bypassed" line.long 0x08 "INTER,Interrupt Status Register" rbitfld.long 0x08 8. " SDRPLLLOCKED ,SDRAM PLL Current Lock Status" "Not locked,Locked" rbitfld.long 0x08 7. " PERPLLLOCKED ,Peripheral PLL Current Lock Status" "Not locked,Locked" rbitfld.long 0x08 6. " MAINPLLLOCKED ,Main PLL Current Lock Status" "Not locked,Locked" eventfld.long 0x08 5. " SDRPLLLOST ,SDRAM PLL Lost Lock" "Not locked,Locked" textline " " eventfld.long 0x08 4. " PERPLLLOST ,Peripheral PLL Lost Lock" "Not locked,Locked" eventfld.long 0x08 3. " MAINPLLLOST ,Main PLL Lost Lock" "Not locked,Locked" eventfld.long 0x08 2. " SDRPLLACHIEVED ,SDRAM PLL Achieved Lock" "Not locked,Locked" textline " " eventfld.long 0x08 1. " PERPLLACHIEVED ,Peripheral PLL Achieved Lock" "Not locked,Locked" eventfld.long 0x08 0. " MAINPLLACHIEVED ,Main PLL Achieved Lock" "Not locked,Locked" line.long 0x0C "INTREN,Interrupt Enable Register" bitfld.long 0x0C 5. " SDRPLLLOST ,SDRAM PLL Achieved Lock Interrupt Enable" "Disabled,Enabled" bitfld.long 0x0C 4. " PERPLLLOST ,Peripheral PLL Achieved Lock Interrupt Enable" "Disabled,Enabled" bitfld.long 0x0C 3. " MAINPLLLOST ,Main PLL Achieved Lock Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x0C 2. " SDRPLLACHIEVED ,SDRAM PLL Achieved Lock Interrupt Enable" "Disabled,Enabled" bitfld.long 0x0C 1. " PERPLLACHIEVED ,Peripheral PLL Achieved Lock Interrupt Enable" "Disabled,Enabled" bitfld.long 0x0C 0. " MAINPLLACHIEVED ,Main PLL Achieved Lock Interrupt Enable" "Disabled,Enabled" line.long 0x10 "DBCTRL,Debug clock Control Register" bitfld.long 0x10 1. " ENSFMDWR ,Debug Clocks Enable Safe Mode" "Disabled,Enabled" bitfld.long 0x10 0. " STAYOSC1 ,Debug Clocks Stay on EOSC1_CLK" "No,Yes" rgroup.long 0x14++0x3 line.long 0x00 "STAT,Status Register" bitfld.long 0x00 0. " BUSY ,HW Managed Clocks BUSY" "Not busy,Busy" tree.end width 18. tree "Main PLL Group" group.long 0x40++0x33 line.long 0x00 "VCO,Main PLL VCO Control Register" bitfld.long 0x00 31. " REGEXTSEL ,External Regulator Input Select" "Internal,External" bitfld.long 0x00 30. " OUTRESET[5] ,Output Counter Reset 5" "No reset,Reset" bitfld.long 0x00 29. " OUTRESET[4] ,Output Counter Reset 4" "No reset,Reset" textline " " bitfld.long 0x00 28. " OUTRESET[3] ,Output Counter Reset 3" "No reset,Reset" bitfld.long 0x00 27. " OUTRESET[2] ,Output Counter Reset 2" "No reset,Reset" bitfld.long 0x00 26. " OUTRESET[1] ,Output Counter Reset 1" "No reset,Reset" textline " " bitfld.long 0x00 25. " OUTRESET[0] ,Output Counter Reset 0" "No reset,Reset" bitfld.long 0x00 24. " OUTRESETALL ,All Output Counter Reset" "No reset,Reset" bitfld.long 0x00 16.--21. " DENOM ,Denominator (N)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" textline " " hexmask.long.word 0x00 3.--15. 1. " NUMER ,Numerator (M)" bitfld.long 0x00 2. " PWRDN ,Power down" "Disabled,Enabled" bitfld.long 0x00 1. " EN ,Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " BGPWRDN ,BG PWRDN" "Disabled,Enabled" line.long 0x04 "MISC,Main PLL VCO Advanced Control Register" bitfld.long 0x04 14. " SATEN ,Saturation Enable" "Disabled,Enabled" bitfld.long 0x04 13. " FASTEN ,Fast Locking Enable" "Disabled,Enabled" hexmask.long.word 0x04 1.--12. 1. " BWADJ ,Loop Bandwidth Adjust" textline " " bitfld.long 0x04 0. " BWADJEN ,Loop Bandwidth Adjust Enabled" "Disabled,Enabled" line.long 0x08 "MPUCLK,Main PLL C0 Control Register for Clock mpu_clk" hexmask.long.word 0x08 0.--8. 1. " CNT ,Counter" line.long 0x0C "MAINCLK,Main PLL C1 Control Register for Clock main_clk" hexmask.long.word 0x0C 0.--8. 1. " CNT ,Counter" line.long 0x10 "DBGATCLK,Main PLL C2 Control Register for Clock dbg_base_clk" hexmask.long.word 0x10 0.--8. 1. " CNT ,Counter" line.long 0x14 "MAINQSPICLK,Main PLL C3 Control Register for Clock main_qspi_clk" hexmask.long.word 0x14 0.--8. 1. " CNT ,Counter" line.long 0x18 "MAINNANDSDMMCCLK,Main PLL C4 Control Register for Clock main_nand_sdmmc_clk" hexmask.long.word 0x18 0.--8. 1. " CNT ,Counter" line.long 0x1C "CFGS2FUSER0CLK,Main PLL C5 Control Register for Clock cfg_s2f_user0_clk" hexmask.long.word 0x1C 0.--8. 1. " CNT ,Counter" line.long 0x20 "EN,Enable Register" bitfld.long 0x20 9. " S2FUSER0CLK ,s2f_user0_clk Enable" "Disabled,Enabled" bitfld.long 0x20 8. " CFGCLK ,cfg_clk Enable" "Disabled,Enabled" bitfld.long 0x20 7. " DBGTIMERCLK ,dbg_timer_clk Enable" "Disabled,Enabled" textline " " bitfld.long 0x20 6. " DBGTRACECLK ,dbg_trace_clk Enable" "Disabled,Enabled" bitfld.long 0x20 5. " DBGCLK ,dbg_clk Enable" "Disabled,Enabled" bitfld.long 0x20 4. " DBGATCLK ,dbg_at_clk Enable" "Disabled,Enabled" textline " " bitfld.long 0x20 3. " L4SPCLK ,l4_sp_clk Enable" "Disabled,Enabled" bitfld.long 0x20 2. " L4MPCLK ,l4_mp_clk Enable" "Disabled,Enabled" bitfld.long 0x20 1. " L3MPCLK ,l3_mp_clk Enable" "Disabled,Enabled" textline " " bitfld.long 0x20 0. " L4MAINCLK ,l4_main_clk Enable" "Disabled,Enabled" line.long 0x24 "MAINDIV,Main Divide Register" bitfld.long 0x24 7.--9. " L4SPCLK ,L4 SP Clock Divider" "Div by 1,Div by 2,Div by 4,Div by 8,Div by 16,?..." bitfld.long 0x24 4.--6. " L4MPCLK ,L4 MP Clock Divider" "Div by 1,Div by 2,Div by 4,Div by 8,Div by 16,?..." bitfld.long 0x24 2.--3. " L3SPCLK ,L3 SP Clock Divider" "Div by 1,Div by 2,?..." textline " " bitfld.long 0x24 0.--1. " L3MPCLK ,L3 MP Clock Divider" "Div by 1,Div by 2,?..." line.long 0x28 "DBGDIV,Debug Divide Register" bitfld.long 0x28 2.--3. " DBGCLK ,Debug Clock Divider" "Reserved,/2,/4,?..." bitfld.long 0x28 0.--1. " DBGATCLK ,Debug AT Clock Divider" "/1,/2,/4,?..." line.long 0x2C "TRACEDIV,Debug Trace Divide Register" bitfld.long 0x2C 0.--2. " TRACECLK ,Debug Trace Clock Divider" "Div by 1,Div by 2,Div by 4,Div by 8,Div by 16,?..." line.long 0x30 "L4SRC,L4 MP SP APB Clock Source" bitfld.long 0x30 1. " L4SP ,l4_sp_clk Source" "main_clk,periph_base_clk" bitfld.long 0x30 0. " L4MP ,l4_mp_clk Source" "main_clk,periph_base_clk" rgroup.long 0x74++0x3 line.long 0x00 "STAT,Main PLL Output Counter Reset Ack Status Register" bitfld.long 0x00 5. " OUTRESETACK[5] ,Output Counter Reset Acknowledge 5" "Not received,Received" bitfld.long 0x00 4. " OUTRESETACK[4] ,Output Counter Reset Acknowledge 4" "Not received,Received" bitfld.long 0x00 3. " OUTRESETACK[3] ,Output Counter Reset Acknowledge 3" "Not received,Received" textline " " bitfld.long 0x00 2. " OUTRESETACK[2] ,Output Counter Reset Acknowledge 2" "Not received,Received" bitfld.long 0x00 1. " OUTRESETACK[1] ,Output Counter Reset Acknowledge 1" "Not received,Received" bitfld.long 0x00 0. " OUTRESETACK[0] ,Output Counter Reset Acknowledge 0" "Not received,Received" tree.end width 17. tree "Peripheral PLL Group" group.long 0x80++0x2F line.long 0x00 "VCO,Peripheral PLL VCO Control Register" bitfld.long 0x00 31. " REGEXTSEL ,External Regulator Input Select" "Internal,External" bitfld.long 0x00 30. " OUTRESET[5] ,Output Counter Reset 5" "No reset,Reset" bitfld.long 0x00 29. " OUTRESET[4] ,Output Counter Reset 4" "No reset,Reset" textline " " bitfld.long 0x00 28. " OUTRESET[3] ,Output Counter Reset 3" "No reset,Reset" bitfld.long 0x00 27. " OUTRESET[2] ,Output Counter Reset 2" "No reset,Reset" bitfld.long 0x00 26. " OUTRESET[1] ,Output Counter Reset 1" "No reset,Reset" textline " " bitfld.long 0x00 25. " OUTRESET[0] ,Output Counter Reset 0" "No reset,Reset" bitfld.long 0x00 24. " OUTRESETALL ,All Output Counter Reset" "No reset,Reset" bitfld.long 0x00 22.--23. " PSRC ,Clock Source" "eosc1_clk,eosc2_clk,f2s_periph_ref_clk,?..." textline " " bitfld.long 0x00 16.--21. " DENOM ,Denominator (N)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 3.--15. 1. " NUMER ,Numerator (M)" bitfld.long 0x00 2. " PWRDN ,Power down" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " EN ,Enable" "Disabled,Enabled" bitfld.long 0x00 0. " BGPWRDN ,BG PWRDN" "Disabled,Enabled" line.long 0x04 "MISC,Peripheral PLL VCO Advanced Control Register" bitfld.long 0x04 14. " SATEN ,Saturation Enable" "Disabled,Enabled" bitfld.long 0x04 13. " FASTEN ,Fast Locking Enable" "Disabled,Enabled" hexmask.long.word 0x04 1.--12. 1. " BWADJ ,Loop Bandwidth Adjust" textline " " bitfld.long 0x04 0. " BWADJEN ,Loop Bandwidth Adjust Enabled" "Disabled,Enabled" line.long 0x08 "EMAC0CLK,Peripheral PLL C0 Control Register for Clock emac0_clk" hexmask.long.word 0x08 0.--8. 1. " CNT ,Counter" line.long 0x0C "EMAC1CLK,Peripheral PLL C1 Control Register for Clock emac1_clk" hexmask.long.word 0x0C 0.--8. 1. " CNT ,Counter" line.long 0x10 "PERQSPICLK,Peripheral PLL C2 Control Register for Clock periph_qspi_clk" hexmask.long.word 0x10 0.--8. 1. " CNT ,Counter" line.long 0x14 "PERNANDSDMMCCLK,Peripheral PLL C3 Control Register for Clock periph_nand_sdmmc_clk" hexmask.long.word 0x14 0.--8. 1. " CNT ,Counter" line.long 0x18 "PERBASECLK,Peripheral PLL C4 Control Register for Clock periph_base_clk" hexmask.long.word 0x18 0.--8. 1. " CNT ,Counter" line.long 0x1C "S2FUSER1CLK,Peripheral PLL C5 Control Register for Clock s2f_user1_clk" hexmask.long.word 0x1C 0.--8. 1. " CNT ,Counter" line.long 0x20 "EN,Enable Register" bitfld.long 0x20 11. " QSPICLK ,qspi_clk Enable" "Disabled,Enabled" bitfld.long 0x20 10. " NANDCLK ,nand_clk Enable" "Disabled,Enabled" bitfld.long 0x20 9. " NANDXCLK ,nand_x_clk Enable" "Disabled,Enabled" bitfld.long 0x20 8. " SDMMCCLK ,sdmmc_clk Enable" "Disabled,Enabled" textline " " bitfld.long 0x20 7. " S2FUSER1CLK ,s2f_user1_clk Enable" "Disabled,Enabled" bitfld.long 0x20 6. " GPIOCLK ,gpio_clk Enable" "Disabled,Enabled" bitfld.long 0x20 5. " CAN1CLK ,can1_clk Enable" "Disabled,Enabled" textline " " bitfld.long 0x20 4. " CAN0CLK ,can0_clk Enable" "Disabled,Enabled" bitfld.long 0x20 3. " SPIMCLK ,spi_m_clk Enable" "Disabled,Enabled" bitfld.long 0x20 2. " USBCLK ,usb_mp_clk Enable" "Disabled,Enabled" textline " " bitfld.long 0x20 1. " EMAC1CLK ,emac1_clk Enable" "Disabled,Enabled" bitfld.long 0x20 0. " EMAC0CLK ,emac0_clk Enable" "Disabled,Enabled" line.long 0x24 "DIV,Divide Register" bitfld.long 0x24 9.--11. " CAN1CLK ,CAN1 Clock Divider" "Div by 1,Div by 2,Div by 4,Div by 8,Div by 16,?..." bitfld.long 0x24 6.--8. " CAN0CLK ,CAN0 Clock Divider" "Div by 1,Div by 2,Div by 4,Div by 8,Div by 16,?..." bitfld.long 0x24 3.--5. " SPIMCLK ,SPI Master Clock Divider" "Div by 1,Div by 2,Div by 4,Div by 8,Div by 16,?..." textline " " bitfld.long 0x24 0.--2. " USBCLK ,USB Clock Divider" "Div by 1,Div by 2,Div by 4,Div by 8,Div by 16,?..." line.long 0x28 "GPIODIV,GPIO Divide Register" hexmask.long.tbyte 0x28 0.--23. 1. " GPIODBCLK ,GPIO De-bounce Clock Divider" line.long 0x2C "SRC,Flash Clock Source Register" bitfld.long 0x2C 4.--5. " QSPI ,QSPI Clock Source" "F2s_periph_ref_clk,Main_qspi_clk,Periph_qspi_clk,?..." bitfld.long 0x2C 2.--3. " NAND ,NAND Clock Source" "F2s_periph_ref_clk,Main_nand_sdmmc_clk,Periph_nand_sdmmc_clk,?..." bitfld.long 0x2C 0.--1. " SDMMC ,SDMMC Clock Source" "F2s_periph_ref_clk,Main_nand_sdmmc_clk,Periph_nand_sdmmc_clk,?..." rgroup.long 0xB0++0x3 line.long 0x00 "STAT,Peripheral PLL Output Counter Reset Ack Status Register" bitfld.long 0x00 5. " OUTRESETACK[5] ,Output Counter Reset Acknowledge 5" "Not received,Received" bitfld.long 0x00 4. " OUTRESETACK[4] ,Output Counter Reset Acknowledge 4" "Not received,Received" bitfld.long 0x00 3. " OUTRESETACK[3] ,Output Counter Reset Acknowledge 3" "Not received,Received" textline " " bitfld.long 0x00 2. " OUTRESETACK[2] ,Output Counter Reset Acknowledge 2" "Not received,Received" bitfld.long 0x00 1. " OUTRESETACK[1] ,Output Counter Reset Acknowledge 1" "Not received,Received" bitfld.long 0x00 0. " OUTRESETACK[0] ,Output Counter Reset Acknowledge 0" "Not received,Received" tree.end width 13. tree "SDRAM PLL Group" group.long 0xC0++0x1B line.long 0x00 "VCO,Peripheral PLL VCO Control Register" bitfld.long 0x00 31. " REGEXTSEL ,External Regulator Input Select" "Internal,External" bitfld.long 0x00 30. " OUTRESET[5] ,Output Counter Reset 5" "No reset,Reset" bitfld.long 0x00 29. " OUTRESET[4] ,Output Counter Reset 4" "No reset,Reset" textline " " bitfld.long 0x00 28. " OUTRESET[3] ,Output Counter Reset 3" "No reset,Reset" bitfld.long 0x00 27. " OUTRESET[2] ,Output Counter Reset 2" "No reset,Reset" bitfld.long 0x00 26. " OUTRESET[1] ,Output Counter Reset 1" "No reset,Reset" textline " " bitfld.long 0x00 25. " OUTRESET[0] ,Output Counter Reset 0" "No reset,Reset" bitfld.long 0x00 24. " OUTRESETALL ,All Output Counter Reset" "No reset,Reset" bitfld.long 0x00 22.--23. " PSRC ,Clock Source" "eosc1_clk,eosc2_clk,f2s_periph_ref_clk,?..." textline " " bitfld.long 0x00 16.--21. " DENOM ,Denominator (N)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 3.--15. 1. " NUMER ,Numerator (M)" bitfld.long 0x00 2. " PWRDN ,Power down" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " EN ,Enable" "Disabled,Enabled" bitfld.long 0x00 0. " BGPWRDN ,BG PWRDN" "Disabled,Enabled" line.long 0x04 "CTRL,SDRAM PLL VCO Advanced Control Register" bitfld.long 0x04 14. " SATEN ,Saturation Enable" "Disabled,Enabled" bitfld.long 0x04 13. " FASTEN ,Fast Locking Enable" "Disabled,Enabled" hexmask.long.word 0x04 1.--12. 1. " BWADJ ,Loop Bandwidth Adjust" textline " " bitfld.long 0x04 0. " BWADJEN ,Loop Bandwidth Adjust Enabled" "Disabled,Enabled" line.long 0x08 "DDRDQSCLK,SDRAM PLL C0 Control Register for Clock ddr_dqs_clk" hexmask.long.word 0x08 9.--20. 1. " PHASE ,Phase Shift" hexmask.long.word 0x08 0.--8. 1. " CNT ,Counter" line.long 0x0C "DDR2XDQSCLK,SDRAM PLL C1 Control Register for Clock ddr_2x_dqs_clk" hexmask.long.word 0x0C 9.--20. 1. " PHASE ,Phase Shift" hexmask.long.word 0x0C 0.--8. 1. " CNT ,Counter" line.long 0x10 "DDRDQCLK,SDRAM PLL C2 Control Register for Clock ddr_dq_clk" hexmask.long.word 0x10 9.--20. 1. " PHASE ,Phase Shift" hexmask.long.word 0x10 0.--8. 1. " CNT ,Counter" line.long 0x14 "S2FUSER2CLK,SDRAM PLL C5 Control Register for Clock s2f_user2_clk" hexmask.long.word 0x14 9.--20. 1. " PHASE ,Phase Shift" hexmask.long.word 0x14 0.--8. 1. " CNT ,Counter" line.long 0x18 "EN,Enable Register" bitfld.long 0x18 3. " S2FUSER2CLK ,s2f_user2_clk Enable" "Disabled,Enabled" bitfld.long 0x18 2. " DDRDQCLK ,ddr_dq_clk Enable" "Disabled,Enabled" bitfld.long 0x18 1. " DDR2XDQSCLK ,ddr_2x_dqs_clk Enable" "Disabled,Enabled" textline " " bitfld.long 0x18 0. " DDRDQSCLK ,ddr_dqs_clk Enable" "Disabled,Enabled" rgroup.long 0xD4++0x3 line.long 0x00 "STAT,SDRAM PLL Output Counter Reset Ack Status Register" bitfld.long 0x00 5. " OUTRESETACK[5] ,Output Counter Reset Acknowledge 5" "Not received,Received" bitfld.long 0x00 4. " OUTRESETACK[4] ,Output Counter Reset Acknowledge 4" "Not received,Received" bitfld.long 0x00 3. " OUTRESETACK[3] ,Output Counter Reset Acknowledge 3" "Not received,Received" textline " " bitfld.long 0x00 2. " OUTRESETACK[2] ,Output Counter Reset Acknowledge 2" "Not received,Received" bitfld.long 0x00 1. " OUTRESETACK[1] ,Output Counter Reset Acknowledge 1" "Not received,Received" bitfld.long 0x00 0. " OUTRESETACK[0] ,Output Counter Reset Acknowledge 0" "Not received,Received" tree.end width 0xB tree.end tree "RSTMGR (Reset Manager Module)" base ad:0xFFD05000 width 12. group.long 0x00++0xB line.long 0x00 "STAT,Status Register" eventfld.long 0x00 28. " ETRSTALLTIMEOUT ,ETR Stall Timeout" "No timeout,Timeout" eventfld.long 0x00 27. " FPGAHSTIMEOUT ,FPGA handshake Timeout" "No timeout,Timeout" eventfld.long 0x00 26. " SCANHSTIMEOUT ,SCAN manager handshake Timeout" "No timeout,Timeout" textline " " eventfld.long 0x00 25. " FPGAMGRHSTIMEOUT ,FPGA manager handshake Timeout" "No timeout,Timeout" eventfld.long 0x00 24. " SDRSELFREFTIMEOUT ,SDRAM Self-Refresh Timeout" "No timeout,Timeout" eventfld.long 0x00 19. " CDBGREQRST ,DAP Debug Reset" "No reset,Reset" textline " " eventfld.long 0x00 18. " FPGADBGRST ,FPGA Core Debug Reset" "No reset,Reset" eventfld.long 0x00 15. " L4WD1RST ,L4 Watchdog 1 Warm Reset" "No reset,Reset" eventfld.long 0x00 14. " L4WD0RST ,L4 Watchdog 0 Warm Reset" "No reset,Reset" textline " " eventfld.long 0x00 13. " MPUWD1RST ,MPU Watchdog 1 Warm Reset" "No reset,Reset" eventfld.long 0x00 12. " MPUWD0RST ,MPU Watchdog 0 Warm Reset" "No reset,Reset" eventfld.long 0x00 10. " SWWARMRST ,Software Warm Reset" "No reset,Reset" textline " " eventfld.long 0x00 9. " FPGAWARMRST ,FPGA Core Warm Reset" "No reset,Reset" eventfld.long 0x00 8. " NRSTPINRST ,nRST Pin Warm Reset" "No reset,Reset" eventfld.long 0x00 4. " SWCOLDRST ,Software Cold Reset" "No reset,Reset" textline " " eventfld.long 0x00 3. " CONFIGIOCOLDRST ,CONFIG_IO Cold Reset" "No reset,Reset" eventfld.long 0x00 2. " FPGACOLDRST ,FPGA Core Cold Reset" "No reset,Reset" eventfld.long 0x00 1. " NPORPINRST ,nPOR Pin Cold Reset" "No reset,Reset" textline " " eventfld.long 0x00 0. " PORVOLTRST ,Power-On Voltage Detector Cold Reset" "No reset,Reset" line.long 0x04 "CTRL,Control Register" eventfld.long 0x04 23. " ETRSTALLWARMRST ,ETR (Embedded Trace Router) Stall After Warm Reset" "Not stalled,Stalled" rbitfld.long 0x04 22. " ETRSTALLACK ,ETR (Embedded Trace Router) Stall Acknowledge" "Not acknowledged,Acknowledged" bitfld.long 0x04 21. " ETRSTALLREQ ,ETR (Embedded Trace Router) Stall Request" "Not requested,Requested" textline " " bitfld.long 0x04 20. " ETRSTALLEN ,ETR (Embedded Trace Router) Stall Enable" "Disabled,Enabled" rbitfld.long 0x04 18. " FPGAHSACK ,FPGA Handshake Acknowledge" "Not acknowledged,Acknowledged" bitfld.long 0x04 17. " FPGAHSREQ ,FPGA Handshake Request" "Not requested,Requested" textline " " bitfld.long 0x04 16. " FPGAHSEN ,FPGA Handshake Enable" "Disabled,Enabled" rbitfld.long 0x04 14. " SCANMGRHSACK ,SCAN Manager Handshake Acknowledge" "Not acknowledged,Acknowledged" bitfld.long 0x04 13. " SCANMGRHSREQ ,SCAN Manager Handshake Request" "Not requested,Requested" textline " " bitfld.long 0x04 12. " SCANMGRHSEN ,SCAN Manager Handshake Enable" "Disabled,Enabled" rbitfld.long 0x04 10. " FPGAMGRHSACK ,FPGA Manager Handshake Acknowledge" "Not acknowledged,Acknowledged" bitfld.long 0x04 9. " FPGAMGRHSREQ ,FPGA Manager Handshake Request" "Not requested,Requested" textline " " bitfld.long 0x04 8. " FPGAMGRHSEN ,FPGA Manager Handshake Enable" "Disabled,Enabled" rbitfld.long 0x04 6. " SDRSELFREQACK ,SDRAM Self-Refresh Acknowledge" "Not acknowledged,Acknowledged" bitfld.long 0x04 5. " SDRSELFREFREQ ,SDRAM Self-Refresh Request" "Not requested,Requested" textline " " bitfld.long 0x04 4. " SDRSELFREFEN ,SDRAM Self-Refresh Enable" "Disabled,Enabled" bitfld.long 0x04 1. " SWWARMRSTREQ ,Software Warm Reset Request" "Not requested,Requested" bitfld.long 0x04 0. " SWCOLDRSTREQ ,Software Cold Reset Request" "Not requested,Requested" line.long 0x08 "COUNTS,Reset Cycles Count Register" hexmask.long.tbyte 0x08 8.--27. 1. " WARMRSTCYCLES ,Warm reset release delay count" hexmask.long.byte 0x08 0.--7. 1. " NRSTCNT ,nRST Pin Count" group.long 0x10++0x3 line.long 0x00 "MPUMODRST,MPU Module Reset Register" bitfld.long 0x00 4. " L2 ,L2" "No reset,Reset" bitfld.long 0x00 3. " SCUPER ,SCU/Peripherals" "No reset,Reset" bitfld.long 0x00 2. " WDS ,Watchdogs" "No reset,Reset" textline " " bitfld.long 0x00 1. " CPU1 ,CPU1" "No reset,Reset" bitfld.long 0x00 0. " CPU0 ,CPU0" "No reset,Reset" group.long 0x14++0xF line.long 0x00 "PERMODRST,Peripheral Module Reset Register" bitfld.long 0x00 29. " SDR ,SDRAM Controller Subsystem" "No reset,Reset" bitfld.long 0x00 28. " DMA ,DMA Controller" "No reset,Reset" bitfld.long 0x00 27. " GPIO2 ,GPIO2" "No reset,Reset" textline " " bitfld.long 0x00 26. " GPIO1 ,GPIO1" "No reset,Reset" bitfld.long 0x00 25. " GPIO0 ,GPIO0" "No reset,Reset" bitfld.long 0x00 24. " CAN1 ,CAN1" "No reset,Reset" textline " " bitfld.long 0x00 23. " CAN0 ,CAN0" "No reset,Reset" bitfld.long 0x00 22. " SDMMC ,SD/MMC" "No reset,Reset" bitfld.long 0x00 21. " SPIS1 ,SPIS1" "No reset,Reset" textline " " bitfld.long 0x00 20. " SPIS0 ,SPIS0" "No reset,Reset" bitfld.long 0x00 19. " SPIM1 ,SPIM1" "No reset,Reset" bitfld.long 0x00 18. " SPIM1 ,SPIM1" "No reset,Reset" textline " " bitfld.long 0x00 17. " UART1 ,UART1" "No reset,Reset" bitfld.long 0x00 16. " UART0 ,UART0" "No reset,Reset" bitfld.long 0x00 15. " I2C3 ,I2C3" "No reset,Reset" textline " " bitfld.long 0x00 14. " I2C2 ,I2C2" "No reset,Reset" bitfld.long 0x00 13. " I2C1 ,I2C1" "No reset,Reset" bitfld.long 0x00 12. " I2C0 ,I2C0" "No reset,Reset" textline " " bitfld.long 0x00 11. " SPTIMER1 ,SP Timer 1" "No reset,Reset" bitfld.long 0x00 10. " SPTIMER0 ,SP Timer 0" "No reset,Reset" bitfld.long 0x00 9. " OSC1TIMER1 ,OSC1 Timer 1" "No reset,Reset" textline " " bitfld.long 0x00 8. " OSC1TIMER0 ,OSC1 Timer 0" "No reset,Reset" bitfld.long 0x00 7. " L4WD1 ,L4 Watchdog 1" "No reset,Reset" bitfld.long 0x00 6. " L4WD0 ,L4 Watchdog 0" "No reset,Reset" textline " " bitfld.long 0x00 5. " QSPI ,QSPI Flash" "No reset,Reset" bitfld.long 0x00 4. " NAND ,NAND Flash" "No reset,Reset" bitfld.long 0x00 3. " USB1 ,USB1" "No reset,Reset" textline " " bitfld.long 0x00 2. " USB0 ,USB0" "No reset,Reset" bitfld.long 0x00 1. " EMAC1 ,EMAC1" "No reset,Reset" bitfld.long 0x00 0. " EMAC0 ,EMAC0" "No reset,Reset" line.long 0x04 "PER2MODRST,Peripheral 2 Module Reset Register" bitfld.long 0x04 7. " DMAIF7 ,FPGA DMA7" "No reset,Reset" bitfld.long 0x04 6. " DMAIF6 ,FPGA DMA6" "No reset,Reset" bitfld.long 0x04 5. " DMAIF5 ,FPGA DMA5" "No reset,Reset" textline " " bitfld.long 0x04 4. " DMAIF4 ,FPGA DMA4" "No reset,Reset" bitfld.long 0x04 3. " DMAIF3 ,FPGA DMA3" "No reset,Reset" bitfld.long 0x04 2. " DMAIF2 ,FPGA DMA2" "No reset,Reset" textline " " bitfld.long 0x04 1. " DMAIF1 ,FPGA DMA1" "No reset,Reset" bitfld.long 0x04 0. " DMAIF0 ,FPGA DMA0" "No reset,Reset" line.long 0x08 "BRGMODRST,Bridge Module Reset Register" bitfld.long 0x08 2. " FPGA2HPS ,FPGA2HPS Bridge" "No reset,Reset" bitfld.long 0x08 1. " LWHPS2FPGA ,LWHPS2FPGA Bridge" "No reset,Reset" bitfld.long 0x08 0. " HPS2FPGA ,HPS2FPGA Bridge" "No reset,Reset" line.long 0x0C "MISCMODRST,Miscellaneous Module Reset Register" bitfld.long 0x0C 16. " SDRCOLD ,SDRAM Controller Subsystem Cold Reset" "No reset,Reset" bitfld.long 0x0C 15. " TAPCOLD ,TAP Controller" "No reset,Reset" bitfld.long 0x0C 14. " DBG ,Debug" "No reset,Reset" textline " " bitfld.long 0x0C 13. " SYSDBG ,System/Debug" "No reset,Reset" bitfld.long 0x0C 12. " FRZCTRLCOLD ,Freeze Controller" "No reset,Reset" bitfld.long 0x0C 11. " SCANMGR ,Scan Manager" "No reset,Reset" textline " " bitfld.long 0x0C 10. " CLKMGRCOLD ,Clock Manager" "No reset,Reset" bitfld.long 0x0C 9. " TIMESTAMPCOLD ,Timestamp" "No reset,Reset" bitfld.long 0x0C 8. " NRSTPIN ,nRST Pin" "No reset,Reset" textline " " bitfld.long 0x0C 7. " S2FCOLD ,HPS to FPGA Core (Cold-only)" "No reset,Reset" bitfld.long 0x0C 6. " S2F ,HPS to FPGA Core (Cold or Warm)" "No reset,Reset" bitfld.long 0x0C 5. " ACPIDMAP ,ACP ID Mapper" "No reset,Reset" textline " " bitfld.long 0x0C 4. " FPGAMGR ,FPGA Manager" "No reset,Reset" bitfld.long 0x0C 3. " SYSMGRCOLD ,System Manager (Cold-only)" "No reset,Reset" bitfld.long 0x0C 2. " SYSMGR ,System Manager (Cold or Warm)" "No reset,Reset" textline " " bitfld.long 0x0C 1. " OCRAM ,On-chip RAM" "No reset,Reset" bitfld.long 0x0C 0. " ROM ,Boot ROM" "No reset,Reset" width 0xB tree.end tree "SYSMGR (System Manager Module)" base ad:0xFFD08000 width 12. rgroup.long 0x00++0x7 line.long 0x00 "SILICONID1,Silicon ID1 Register" hexmask.long.word 0x00 16.--31. 1. " ID ,Silicon ID" hexmask.long.word 0x00 0.--15. 1. " REV ,Silicon Revision" line.long 0x04 "SILICONID2,Silicon ID2 Register" group.long 0x10++0x3 line.long 0x00 "WDDBG,L4 Watchdog Debug Register" bitfld.long 0x00 2.--3. " MODE[1] ,Debug Mode" "Continue,Pause CPU0,Pause CPU1,Pause either" bitfld.long 0x00 0.--1. " MODE[0] ,Debug Mode" "Continue,Pause CPU0,Pause CPU1,Pause either" rgroup.long 0x14++0x7 line.long 0x00 "BOOTINFO,Boot Info Register" bitfld.long 0x00 8.--9. " PINCSEL ,HPS Pin Clock Select" "0,1,2,3" bitfld.long 0x00 5.--7. " PINBSEL ,HPS Pin Boot Select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3.--4. " CSEL ,Clock Select" "0,1,2,3" textline " " bitfld.long 0x00 0.--2. " BSEL ,Boot Select" "Reserved,FPGA,NAND Flash (1.8v),NAND Flash (3.0v),SD/MMC External Transceiver (1.8v),SD/MMC Internal Transceiver (3.0v),QSPI Flash (1.8v),QSPI Flash (3.0v)" line.long 0x04 "HPSINFO,HPS Info Register" bitfld.long 0x04 1. " CAN ,CAN" "Disabled,Enabled" bitfld.long 0x04 0. " DUALCORE ,Dual Core" "Disabled,Enabled" group.long 0x1C++0x3 line.long 0x00 "PARITYINJ,Parity Fail Injection Register" bitfld.long 0x00 15. " BTAC[1] ,Parity Fail Injection for BTAC RAM" "No error,Error" bitfld.long 0x00 14. " BTAC[0] ,Parity Fail Injection for BTAC RAM" "No error,Error" bitfld.long 0x00 13. " GHB[1] ,Parity Fail Injection for GHB RAM" "No error,Error" textline " " bitfld.long 0x00 12. " GHB[0] ,Parity Fail Injection for GHB RAM" "No error,Error" bitfld.long 0x00 11. " ICTAG[1] ,Parity Fail Injection for Instruction Cache Tag RAM" "No error,Error" bitfld.long 0x00 10. " ICTAG[0] ,Parity Fail Injection for Instruction Cache Tag RAM" "No error,Error" textline " " bitfld.long 0x00 9. " ICDATA[1] ,Parity Fail Injection for Instruction Cache Data RAM" "No error,Error" bitfld.long 0x00 8. " ICDATA[0] ,Parity Fail Injection for Instruction Cache Data RAM" "No error,Error" bitfld.long 0x00 7. " MAINTLB[1] ,Parity Fail Injection for Main TLB RAM" "No error,Error" textline " " bitfld.long 0x00 6. " MAINTLB[0] ,Parity Fail Injection for Main TLB RAM" "No error,Error" bitfld.long 0x00 5. " DCOUTER[1] ,Parity Fail Injection for Data Cache Outer RAM" "No error,Error" bitfld.long 0x00 4. " DCOUTER[0] ,Parity Fail Injection for Data Cache Outer RAM" "No error,Error" textline " " bitfld.long 0x00 3. " DCTAG[1] ,Parity Fail Injection for Data Cache Tag RAM" "No error,Error" bitfld.long 0x00 2. " DCTAG[0] ,Parity Fail Injection for Data Cache Tag RAM" "No error,Error" bitfld.long 0x00 1. " DCDATA[1] ,Parity Fail Injection for Data Cache Data RAM" "No error,Error" textline " " bitfld.long 0x00 0. " DCDATA[0] ,Parity Fail Injection for Data Cache Data RAM" "No error,Error" width 8. tree "FPGA Interface" group.long 0x20++0xB line.long 0x00 "GBL,Global Disable Register" bitfld.long 0x00 0. " INTF ,Global Interface" "Disabled,Enabled" line.long 0x04 "INDIV,Individual Disable Register" bitfld.long 0x04 7. " CROSSTRIGINTF ,Cross Trigger Interface (CTI)" "Disabled,Enabled" bitfld.long 0x04 6. " STMEVENTINTF ,STM Event Interface" "Disabled,Enabled" bitfld.long 0x04 4. " TRACEINTF ,Trace Interface" "Disabled,Enabled" textline " " bitfld.long 0x04 3. " BSCANINTF ,Boundary-Scan Interface" "Disabled,Enabled" bitfld.long 0x04 2. " CONFIGIOINTF ,CONFIG_IO Interface" "Disabled,Enabled" bitfld.long 0x04 1. " JTAGENINTF ,JTAG Enable Interface" "Disabled,Enabled" textline " " bitfld.long 0x04 0. " RSTREQINTF ,Reset Request Interface" "Disabled,Enabled" line.long 0x08 "MODULE,Module Disable Register" bitfld.long 0x08 3. " EMAC[1] ,EMAC Module" "Disabled,Enabled" bitfld.long 0x08 2. " EMAC[0] ,EMAC Module" "Disabled,Enabled" tree.end width 6. tree "Scan Manager" group.long 0x30++0x3 line.long 0x00 "CTRL,Scan Manager Control Register" bitfld.long 0x00 0. " FPGAJTAGEN ,FPGA JTAG Enable" "Disabled,Enabled" tree.end width 10. tree "Freeze Control" group.long 0x40++0xB line.long 0x0 "VIOCTRL0,VIO Control Register 0" bitfld.long 0x0 4. " SLEW ,IO Slew-rate" "Enabled,Disabled" bitfld.long 0x0 3. " WKPULLUP ,IO Weak Pullup" "Enabled,Disabled" bitfld.long 0x0 2. " TRISTATE ,IO Tri-State" "Enabled,Disabled" textline " " bitfld.long 0x0 1. " BUSHOLD ,IO Bus Hold" "Disabled,Enabled" bitfld.long 0x0 0. " CFG ,IO Configuration" "Disabled,Enabled" line.long 0x4 "VIOCTRL1,VIO Control Register 1" bitfld.long 0x4 4. " SLEW ,IO Slew-rate" "Enabled,Disabled" bitfld.long 0x4 3. " WKPULLUP ,IO Weak Pullup" "Enabled,Disabled" bitfld.long 0x4 2. " TRISTATE ,IO Tri-State" "Enabled,Disabled" textline " " bitfld.long 0x4 1. " BUSHOLD ,IO Bus Hold" "Disabled,Enabled" bitfld.long 0x4 0. " CFG ,IO Configuration" "Disabled,Enabled" line.long 0x8 "VIOCTRL2,VIO Control Register 2" bitfld.long 0x8 4. " SLEW ,IO Slew-rate" "Enabled,Disabled" bitfld.long 0x8 3. " WKPULLUP ,IO Weak Pullup" "Enabled,Disabled" bitfld.long 0x8 2. " TRISTATE ,IO Tri-State" "Enabled,Disabled" textline " " bitfld.long 0x8 1. " BUSHOLD ,IO Bus Hold" "Disabled,Enabled" bitfld.long 0x8 0. " CFG ,IO Configuration" "Disabled,Enabled" group.long 0x50++0xB line.long 0x00 "HIOCTRL,HIO Control Register" bitfld.long 0x00 8. " OCT_CFGEN_CALSTART ,OCT Calibration and Configuration Enable" "Disabled,Enabled" bitfld.long 0x00 7. " REGRST ,IO and DQS Reset" "Disabled,Enabled" bitfld.long 0x00 6. " OCTRST ,OCT Reset" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " DLLRST ,DLL Reset" "Disabled,Enabled" bitfld.long 0x00 4. " SLEW ,IO Slew-rate" "Enabled,Disabled" bitfld.long 0x00 3. " WKPULLUP ,IO Weak Pullup" "Enabled,Disabled" textline " " bitfld.long 0x00 2. " TRISTATE ,IO Tri-State" "Enabled,Disabled" bitfld.long 0x00 1. " BUSHOLD ,IO Bus Hold" "Disabled,Enabled" bitfld.long 0x00 0. " CFG ,IO Configuration" "Disabled,Enabled" line.long 0x04 "SRC,Source Register" bitfld.long 0x04 0. " VIO1 ,VIO1 Freeze Signal Source" "Software,Hardware" line.long 0x08 "HWCTRL,Hardware Control Register" rbitfld.long 0x08 1.--2. " VIO1STATE ,VIO channel 1 State" "Thawed to frozen,Thawed,Frozen,Frozen to thawed" bitfld.long 0x08 0. " VIO1REQ ,VIO channel 1 Freeze/Thaw request" "Thaw,Freeze" tree.end width 10. tree "EMAC" group.long 0x60++0x7 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 5. " PTPCLKSEL[1] ,PTP Clock Select" "OSC1_CLK,FPGA_PTP_REF_CLK" bitfld.long 0x00 4. " PTPCLKSEL[0] ,PTP Clock Select" "OSC1_CLK,FPGA_PTP_REF_CLK" bitfld.long 0x00 2.--3. " PHYSEL[1] ,PHY Interface Select" "GMII/MII,RGMII,RMII,?..." textline " " bitfld.long 0x00 0.--1. " PHYSEL[0] ,PHY Interface Select" "GMII/MII,RGMII,RMII,?..." line.long 0x04 "L3MASTER,EMAC L3 Master AxCACHE Register" bitfld.long 0x04 12.--15. " AWCACHE[1] ,EMAC AWCACHE" "NONCACHE_NONBUFF,BUFF,CACHE_NONALLOC,CACHE_BUFF_NONALLOC,Reserved,Reserved,CACHE_WRTHRU_RDALLOC,CACHE_WRBACK_RDALLOC,Reserved,Reserved,CACHE_WRTHRU_WRALLOC,CACHE_WRBACK_WRALLOC,Reserved,Reserved,CACHE_WRTHRU_ALLOC,CACHE_WRBACK_ALLOC" bitfld.long 0x04 8.--11. " AWCACHE[0] ,EMAC AWCACHE" "NONCACHE_NONBUFF,BUFF,CACHE_NONALLOC,CACHE_BUFF_NONALLOC,Reserved,Reserved,CACHE_WRTHRU_RDALLOC,CACHE_WRBACK_RDALLOC,Reserved,Reserved,CACHE_WRTHRU_WRALLOC,CACHE_WRBACK_WRALLOC,Reserved,Reserved,CACHE_WRTHRU_ALLOC,CACHE_WRBACK_ALLOC" bitfld.long 0x04 4.--7. " ARCACHE[1] ,EMAC ARCACHE" "NONCACHE_NONBUFF,BUFF,CACHE_NONALLOC,CACHE_BUFF_NONALLOC,Reserved,Reserved,CACHE_WRTHRU_RDALLOC,CACHE_WRBACK_RDALLOC,Reserved,Reserved,CACHE_WRTHRU_WRALLOC,CACHE_WRBACK_WRALLOC,Reserved,Reserved,CACHE_WRTHRU_ALLOC,CACHE_WRBACK_ALLOC" textline " " bitfld.long 0x04 0.--3. " ARCACHE[0] ,EMAC ARCACHE" "NONCACHE_NONBUFF,BUFF,CACHE_NONALLOC,CACHE_BUFF_NONALLOC,Reserved,Reserved,CACHE_WRTHRU_RDALLOC,CACHE_WRBACK_RDALLOC,Reserved,Reserved,CACHE_WRTHRU_WRALLOC,CACHE_WRBACK_WRALLOC,Reserved,Reserved,CACHE_WRTHRU_ALLOC,CACHE_WRBACK_ALLOC" tree.end width 13. tree "DMA Controller" group.long 0x70++0x7 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 12. " IRQNONSECURE[7] ,IRQ Security 7" "Secure,Non-secure" bitfld.long 0x00 11. " IRQNONSECURE[6] ,IRQ Security 6" "Secure,Non-secure" bitfld.long 0x00 10. " IRQNONSECURE[5] ,IRQ Security 5" "Secure,Non-secure" textline " " bitfld.long 0x00 9. " IRQNONSECURE[4] ,IRQ Security 4" "Secure,Non-secure" bitfld.long 0x00 8. " IRQNONSECURE[3] ,IRQ Security 3" "Secure,Non-secure" bitfld.long 0x00 7. " IRQNONSECURE[2] ,IRQ Security 2" "Secure,Non-secure" textline " " bitfld.long 0x00 6. " IRQNONSECURE[1] ,IRQ Security 1" "Secure,Non-secure" bitfld.long 0x00 5. " IRQNONSECURE[0] ,IRQ Security 0" "Secure,Non-secure" bitfld.long 0x00 4. " MGRNONSECURE ,Manager Thread Security" "Enabled,Disabled" textline " " bitfld.long 0x00 3. " CHANSEL[3] ,Channel Select" "FPGA,CAN" bitfld.long 0x00 2. " CHANSEL[2] ,Channel Select" "FPGA,CAN" bitfld.long 0x00 1. " CHANSEL[1] ,Channel Select" "FPGA,CAN" textline " " bitfld.long 0x00 0. " CHANSEL[0] ,Channel Select" "FPGA,CAN" line.long 0x04 "PERSECURITY,Peripheral Security Register" bitfld.long 0x04 31. " NONSECURE[31] ,Peripheral Non-Secure 31" "No,Yes" bitfld.long 0x04 30. " NONSECURE[30] ,Peripheral Non-Secure 30" "No,Yes" bitfld.long 0x04 29. " NONSECURE[29] ,Peripheral Non-Secure 29" "No,Yes" textline " " bitfld.long 0x04 28. " NONSECURE[28] ,Peripheral Non-Secure 28" "No,Yes" bitfld.long 0x04 27. " NONSECURE[27] ,Peripheral Non-Secure 27" "No,Yes" bitfld.long 0x04 26. " NONSECURE[26] ,Peripheral Non-Secure 26" "No,Yes" textline " " bitfld.long 0x04 25. " NONSECURE[25] ,Peripheral Non-Secure 25" "No,Yes" bitfld.long 0x04 24. " NONSECURE[24] ,Peripheral Non-Secure 24" "No,Yes" bitfld.long 0x04 23. " NONSECURE[23] ,Peripheral Non-Secure 23" "No,Yes" textline " " bitfld.long 0x04 22. " NONSECURE[22] ,Peripheral Non-Secure 22" "No,Yes" bitfld.long 0x04 21. " NONSECURE[21] ,Peripheral Non-Secure 21" "No,Yes" bitfld.long 0x04 20. " NONSECURE[20] ,Peripheral Non-Secure 20" "No,Yes" textline " " bitfld.long 0x04 19. " NONSECURE[19] ,Peripheral Non-Secure 19" "No,Yes" bitfld.long 0x04 18. " NONSECURE[18] ,Peripheral Non-Secure 18" "No,Yes" bitfld.long 0x04 17. " NONSECURE[17] ,Peripheral Non-Secure 17" "No,Yes" textline " " bitfld.long 0x04 16. " NONSECURE[16] ,Peripheral Non-Secure 16" "No,Yes" bitfld.long 0x04 15. " NONSECURE[15] ,Peripheral Non-Secure 15" "No,Yes" bitfld.long 0x04 14. " NONSECURE[14] ,Peripheral Non-Secure 14" "No,Yes" textline " " bitfld.long 0x04 13. " NONSECURE[13] ,Peripheral Non-Secure 13" "No,Yes" bitfld.long 0x04 12. " NONSECURE[12] ,Peripheral Non-Secure 12" "No,Yes" bitfld.long 0x04 11. " NONSECURE[11] ,Peripheral Non-Secure 11" "No,Yes" textline " " bitfld.long 0x04 10. " NONSECURE[10] ,Peripheral Non-Secure 10" "No,Yes" bitfld.long 0x04 9. " NONSECURE[9] ,Peripheral Non-Secure 9" "No,Yes" bitfld.long 0x04 8. " NONSECURE[8] ,Peripheral Non-Secure 8" "No,Yes" textline " " bitfld.long 0x04 7. " NONSECURE[7] ,Peripheral Non-Secure 7" "No,Yes" bitfld.long 0x04 6. " NONSECURE[6] ,Peripheral Non-Secure 6" "No,Yes" bitfld.long 0x04 5. " NONSECURE[5] ,Peripheral Non-Secure 5" "No,Yes" textline " " bitfld.long 0x04 4. " NONSECURE[4] ,Peripheral Non-Secure 4" "No,Yes" bitfld.long 0x04 3. " NONSECURE[3] ,Peripheral Non-Secure 3" "No,Yes" bitfld.long 0x04 2. " NONSECURE[2] ,Peripheral Non-Secure 2" "No,Yes" textline " " bitfld.long 0x04 1. " NONSECURE[1] ,Peripheral Non-Secure 1" "No,Yes" bitfld.long 0x04 0. " NONSECURE[0] ,Peripheral Non-Secure 0" "No,Yes" tree.end width 12. tree "Preloader (initial software)" group.long 0x80++0x1F line.long 0x0 "HANDOFF[0],Preloader to OS Handoff Information 0" line.long 0x4 "HANDOFF[1],Preloader to OS Handoff Information 1" line.long 0x8 "HANDOFF[2],Preloader to OS Handoff Information 2" line.long 0xC "HANDOFF[3],Preloader to OS Handoff Information 3" line.long 0x10 "HANDOFF[4],Preloader to OS Handoff Information 4" line.long 0x14 "HANDOFF[5],Preloader to OS Handoff Information 5" line.long 0x18 "HANDOFF[6],Preloader to OS Handoff Information 6" line.long 0x1C "HANDOFF[7],Preloader to OS Handoff Information 7" tree.end width 15. tree "Boot ROM Code Register" group.long 0xC0++0x13 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 1. " WARMRSTCFGIO ,Warm Reset Configure IOs for Boot Pins" "Disabled,Enabled" bitfld.long 0x00 0. " WARMRSTCFGPINMUX ,Warm Reset Configure Pin Mux for Boot Pins" "Disabled,Enabled" line.long 0x04 "CPU1STARTADDR,CPU1 Start Address Register" line.long 0x08 "INITSWSTATE,Preloader (initial software) State Register" line.long 0x0C "INITSWLASTLD,Preloader (initial software) Last Image Loaded Register" bitfld.long 0x0C 0.--1. " INDEX ,Index of last image loaded" "0,1,2,3" line.long 0x10 "BOOTROMSWSTATE,Boot ROM Software State Register" group.long 0xE0++0x13 "Warm Boot from On-Chip RAM Group" line.long 0x00 "ENABLE,Enable Register" line.long 0x04 "DATASTART,Data Start Register" hexmask.long.word 0x04 0.--15. 1. " OFFSET ,Data Start Offset" line.long 0x08 "LENGTH,Length Register" hexmask.long.word 0x08 0.--15. 1. " SIZE ,Size" line.long 0x0C "EXECUTION,Execution Register" hexmask.long.word 0x0C 0.--15. 1. " OFFSET ,Execution Offset" line.long 0x10 "CRC,Expected CRC Register" tree.end width 6. tree "Boot ROM Hardware Register" group.long 0x100++0x3 line.long 0x00 "CTRL,Boot ROM Hardware Control Register" bitfld.long 0x00 1. " ENSFMDWRU ,Enable Safe Mode Warm Reset Update" "Disabled,Enabled" bitfld.long 0x00 0. " WAITSTATE ,Wait State" "Disabled,Enabled" tree.end width 10. tree "SDMMC Controller Group" group.long 0x108++0x7 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 6. " FBCLKSEL ,Feedback Clock Select" "cclk_in,fb_clk_in" bitfld.long 0x00 3.--5. " SMPLSEL ,Sample Clock Phase Shift Select" "0 degrees,45 degrees,90 degrees,135 degrees,180 degrees,225 degrees,270 degrees,315 degrees" bitfld.long 0x00 0.--2. " DRVSEL ,Drive Clock Phase Shift Select" "0 degrees,45 degrees,90 degrees,135 degrees,180 degrees,225 degrees,270 degrees,315 degrees" line.long 0x04 "L3MASTER,SD/MMC L3 Master HPROT Register" bitfld.long 0x04 3. " HPROTCACHE[0] ,SD/MMC HPROT Cacheable" "No,Yes" bitfld.long 0x04 2. " HPROTBUFF[0] ,SD/MMC HPROT Bufferable" "No,Yes" bitfld.long 0x04 1. " HPROTPRIV[0] ,SD/MMC HPROT Privileged" "No,Yes" textline " " bitfld.long 0x04 0. " HPROTDATA[0] ,SD/MMC HPROT Data/Opcode" "Opcode fetch,Data access" tree.end width 11. tree "NAND Flash Controller Register" group.long 0x110++0x7 line.long 0x00 "BOOTSTRAP,Bootstrap Control Register" bitfld.long 0x00 3. " TWOROWADDR ,Bootstrap Two Row Address Cycles" "No,Yes" bitfld.long 0x00 2. " NOLOADB0P0 ,Bootstrap Inhibit Load Block 0 Page 0" "No,Yes" bitfld.long 0x00 1. " PAGE512 ,Bootstrap 512 Byte Device" "No,Yes" textline " " bitfld.long 0x00 0. " NOINIT ,Bootstrap Inhibit Initialization" "No,Yes" line.long 0x04 "L3MASTER,NAND L3 Master AxCACHE Register" bitfld.long 0x04 4.--7. " AWCACHE[0] ,NAND AWCACHE" "NONCACHE_NONBUFF,BUFF,CACHE_NONALLOC,CACHE_BUFF_NONALLOC,Reserved,Reserved,CACHE_WRTHRU_RDALLOC,CACHE_WRBACK_RDALLOC,Reserved,Reserved,CACHE_WRTHRU_WRALLOC,CACHE_WRBACK_WRALLOC,Reserved,Reserved,CACHE_WRTHRU_ALLOC,CACHE_WRBACK_ALLOC" bitfld.long 0x04 0.--3. " ARCACHE[0] ,NAND ARCACHE" "NONCACHE_NONBUFF,BUFF,CACHE_NONALLOC,CACHE_BUFF_NONALLOC,Reserved,Reserved,CACHE_WRTHRU_RDALLOC,CACHE_WRBACK_RDALLOC,Reserved,Reserved,CACHE_WRTHRU_WRALLOC,CACHE_WRBACK_WRALLOC,Reserved,Reserved,CACHE_WRTHRU_ALLOC,CACHE_WRBACK_ALLOC" tree.end width 10. tree "USB Controller" group.long 0x118++0x3 line.long 0x00 "L3MASTER,USB L3 Master HPROT Register" bitfld.long 0x00 7. " HPROTCACHE[1] ,USB HPROT Cacheable" "No,Yes" bitfld.long 0x00 6. " HPROTCACHE[0] ,USB HPROT Cacheable" "No,Yes" bitfld.long 0x00 5. " HPROTBUFF[1] ,USB HPROT Bufferable" "No,Yes" textline " " bitfld.long 0x00 4. " HPROTBUFF[0] ,USB HPROT Bufferable" "No,Yes" bitfld.long 0x00 3. " HPROTPRIV[1] ,USB HPROT Privileged" "No,Yes" bitfld.long 0x00 2. " HPROTPRIV[0] ,USB HPROT Privileged" "No,Yes" textline " " bitfld.long 0x00 1. " HPROTDATA[1] ,USB HPROT Data/Opcode" "Opcode fetch,Data access" bitfld.long 0x00 0. " HPROTDATA[0] ,USB HPROT Data/Opcode" "Opcode fetch,Data access" tree.end width 7. tree "ECC Management Register" group.long 0x140++0x2F line.long 0x00 "L2,L2 Data RAM ECC Enable Register" bitfld.long 0x00 2. " INJD ,L2 Data RAM ECC inject double bit/non-correctable error" "No error,Error" bitfld.long 0x00 1. " INJS ,L2 Data RAM ECC inject single/correctable Error" "No error,Error" bitfld.long 0x00 0. " EN ,L2 Data RAM ECC Enable" "Disabled,Enabled" line.long 0x04 "OCRAM,On-chip RAM ECC Enable Register" eventfld.long 0x04 4. " DERR ,On-chip RAM ECC double bit/non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x04 3. " SERR ,On-chip RAM ECC single/correctable error interrupt status" "No error,Error" bitfld.long 0x04 2. " INJD ,On-chip RAM ECC inject double bit/non-correctable error" "No error,Error" textline " " bitfld.long 0x04 1. " INJS ,On-chip RAM ECC inject single/correctable Error" "No interrupt,Interrupt" bitfld.long 0x04 0. " EN ,On-chip RAM ECC Enable" "Disabled,Enabled" line.long 0x08 "USB0,USB0 RAM ECC Enable Register" eventfld.long 0x08 4. " DERR ,USB0 RAM ECC double bit/non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x08 3. " SERR ,USB0 RAM ECC single/correctable error interrupt status" "No interrupt,Interrupt" bitfld.long 0x08 2. " INJD ,USB0 RAM ECC inject double bit/non-correctable error" "No error,Error" textline " " bitfld.long 0x08 1. " INJS ,USB0 RAM ECC inject single/correctable Error" "No error,Error" bitfld.long 0x08 0. " EN ,USB0 RAM ECC Enable" "Disabled,Enabled" line.long 0x0C "USB1,USB1 RAM ECC Enable Register" eventfld.long 0x0C 4. " DERR ,USB1 RAM ECC double bit/non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x0C 3. " SERR ,USB1 RAM ECC single/correctable error interrupt status" "No interrupt,Interrupt" bitfld.long 0x0C 2. " INJD ,USB1 RAM ECC inject double bit/non-correctable error" "No error,Error" textline " " bitfld.long 0x0C 1. " INJS ,USB1 RAM ECC inject single/correctable Error" "No error,Error" bitfld.long 0x0C 0. " EN ,USB1 RAM ECC Enable" "Disabled,Enabled" line.long 0x10 "EMAC0,EMAC0 RAM ECC Enable Register" eventfld.long 0x10 8. " RXFIFODERR ,EMAC0 RXFIFO RAM ECC double bit, non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x10 7. " RXFIFOSERR ,EMAC0 RXFIFO RAM ECC single, correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x10 6. " TXFIFODERR ,EMAC0 TXFIFO RAM ECC double bit, non-correctable error interrupt status" "No interrupt,Interrupt" textline " " eventfld.long 0x10 5. " TXFIFOSERR ,EMAC0 TXFIFO RAM ECC single, correctable error interrupt status" "No interrupt,Interrupt" bitfld.long 0x10 4. " RXFIFOINJD ,EMAC0 RXFIFO RAM ECC inject double bit, non-correctable error" "No error,Error" bitfld.long 0x10 3. " RXFIFOINJS ,EMAC0 RXFIFO RAM ECC inject single, correctable Error" "No error,Error" textline " " bitfld.long 0x10 2. " TXFIFOINJD ,EMAC0 TXFIFO RAM ECC inject double bit, non-correctable error" "No error,Error" bitfld.long 0x10 1. " TXFIFOINJS ,EMAC0 TXFIFO RAM ECC inject single, correctable Error" "No error,Error" bitfld.long 0x10 0. " EN ,EMAC0 RAM ECC Enable" "Disabled,Enabled" line.long 0x14 "EMAC1,EMAC1 RAM ECC Enable Register" eventfld.long 0x14 8. " RXFIFODERR ,EMAC1 RXFIFO RAM ECC double bit, non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x14 7. " RXFIFOSERR ,EMAC1 RXFIFO RAM ECC single, correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x14 6. " TXFIFODERR ,EMAC1 TXFIFO RAM ECC double bit, non-correctable error interrupt status" "No interrupt,Interrupt" textline " " eventfld.long 0x14 5. " TXFIFOSERR ,EMAC1 TXFIFO RAM ECC single, correctable error interrupt status" "No interrupt,Interrupt" bitfld.long 0x14 4. " RXFIFOINJD ,EMAC1 RXFIFO RAM ECC inject double bit, non-correctable error" "No error,Error" bitfld.long 0x14 3. " RXFIFOINJS ,EMAC1 RXFIFO RAM ECC inject single, correctable Error" "No error,Error" textline " " bitfld.long 0x14 2. " TXFIFOINJD ,EMAC1 TXFIFO RAM ECC inject double bit, non-correctable error" "No error,Error" bitfld.long 0x14 1. " TXFIFOINJS ,EMAC1 TXFIFO RAM ECC inject single, correctable Error" "No error,Error" bitfld.long 0x14 0. " EN ,EMAC1 RAM ECC Enable" "Disabled,Enabled" line.long 0x18 "DMA,DMA RAM ECC Enable Register" eventfld.long 0x18 4. " DERR ,DMA RAM ECC double bit/non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x18 3. " SERR ,DMA RAM ECC single/correctable error interrupt status" "No interrupt,Interrupt" bitfld.long 0x18 2. " INJD ,DMA RAM ECC inject double bit/non-correctable error" "No error,Error" textline " " bitfld.long 0x18 1. " INJS ,DMA RAM ECC inject single/correctable Error" "No error,Error" bitfld.long 0x18 0. " EN ,DMA RAM ECC Enable" "Disabled,Enabled" line.long 0x1C "CAN0,CAN0 RAM ECC Enable Register" eventfld.long 0x1C 4. " DERR ,CAN0 RAM ECC double bit/non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x1C 3. " SERR ,CAN0 RAM ECC single/correctable error interrupt status" "No interrupt,Interrupt" bitfld.long 0x1C 2. " INJD ,CAN0 RAM ECC inject double bit/non-correctable error" "No error,Error" textline " " bitfld.long 0x1C 1. " INJS ,CAN0 RAM ECC inject single/correctable Error" "No error,Error" bitfld.long 0x1C 0. " EN ,CAN0 RAM ECC Enable" "Disabled,Enabled" line.long 0x20 "CAN1,CAN1 RAM ECC Enable Register" eventfld.long 0x20 4. " DERR ,CAN1 RAM ECC double bit/non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x20 3. " SERR ,CAN1 RAM ECC single/correctable error interrupt status" "No interrupt,Interrupt" bitfld.long 0x20 2. " INJD ,CAN1 RAM ECC inject double bit/non-correctable error" "No error,Error" textline " " bitfld.long 0x20 1. " INJS ,CAN1 RAM ECC inject single/correctable Error" "No error,Error" bitfld.long 0x20 0. " EN ,CAN1 RAM ECC Enable" "Disabled,Enabled" line.long 0x24 "NAND,NAND RAM ECC Enable Register" eventfld.long 0x24 12. " RDFIFODERR ,NAND RDFIFO RAM ECC double bit/non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x24 11. " RDFIFOSERR ,NAND RDFIFO RAM ECC single/correctable error interrupt status" "interrupt,Interrupt" eventfld.long 0x24 10. " WRFIFODERR ,NAND WRFIFO RAM ECC double bit/non-correctable error interrupt status" "interrupt,Interrupt" textline " " eventfld.long 0x24 9. " WRFIFOSERR ,NAND WRFIFO RAM ECC single/correctable error interrupt status" "interrupt,Interrupt" eventfld.long 0x24 8. " ECCBUFDERR ,NAND ECCBUFFER RAM ECC double bit/non-correctable error interrupt status" "interrupt,Interrupt" eventfld.long 0x24 7. " ECCBUFSERR ,NAND ECCBUFFER RAM ECC single/correctable error interrupt status" "interrupt,Interrupt" textline " " bitfld.long 0x24 6. " RDFIFOINJD ,NAND RDFIFO RAM ECC inject double bit/non-correctable error" "No error,Error" bitfld.long 0x24 5. " RDFIFOINJS ,NAND RDFIFO RAM ECC inject single/correctable Error" "No error,Error" bitfld.long 0x24 4. " WRFIFOINJD ,NAND WRFIFO RAM ECC inject double bit/non-correctable error" "No error,Error" textline " " bitfld.long 0x24 3. " WRFIFOINJS ,NAND WRFIFO RAM ECC inject single/correctable Error" "No error,Error" bitfld.long 0x24 2. " ECCBUFINJD ,NAND ECCBUFFER RAM ECC inject double bit/non-correctable error" "No error,Error" bitfld.long 0x24 1. " ECCBUFINJS ,NAND ECCBUFFER RAM ECC inject single/correctable Error" "No error,Error" textline " " bitfld.long 0x24 0. " EN ,NAND RAM ECC Enable" "Disabled,Enabled" line.long 0x28 "QSPI,QSPI RAM ECC Enable Register" eventfld.long 0x28 4. " DERR ,QSPI RAM ECC double bit/non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x28 3. " SERR ,QSPI RAM ECC single/correctable error interrupt status" "No interrupt,Interrupt" bitfld.long 0x28 2. " INJD ,QSPI RAM ECC inject double bit/non-correctable error" "No error,Error" textline " " bitfld.long 0x28 1. " INJS ,QSPI RAM ECC inject single/correctable Error" "No error,Error" bitfld.long 0x28 0. " EN ,QSPI RAM ECC Enable" "Disabled,Enabled" line.long 0x2C "SDMMC,SDMMC RAM ECC Enable Register" eventfld.long 0x2C 8. " RXFIFODERR ,SDMMC RXFIFO RAM ECC double bit, non-correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x2C 7. " RXFIFOSERR ,SDMMC RXFIFO RAM ECC single, correctable error interrupt status" "No interrupt,Interrupt" eventfld.long 0x2C 6. " TXFIFODERR ,SDMMC TXFIFO RAM ECC double bit, non-correctable error interrupt status" "No interrupt,Interrupt" textline " " eventfld.long 0x2C 5. " TXFIFOSERR ,SDMMC TXFIFO RAM ECC single, correctable error interrupt status" "No interrupt,Interrupt" bitfld.long 0x2C 4. " RXFIFOINJD ,SDMMC RXFIFO RAM ECC inject double bit, non-correctable error" "No error,Error" bitfld.long 0x2C 3. " RXFIFOINJS ,SDMMC RXFIFO RAM ECC inject single, correctable Error" "No error,Error" textline " " bitfld.long 0x2C 2. " TXFIFOINJD ,SDMMC TXFIFO RAM ECC inject double bit, non-correctable error" "No error,Error" bitfld.long 0x2C 1. " TXFIFOINJS ,SDMMC TXFIFO RAM ECC inject single, correctable Error" "No error,Error" bitfld.long 0x2C 0. " EN ,SDMMC RAM ECC Enable" "Disabled,Enabled" tree.end width 15. tree "Pin Mux Control" group.long 0x400++0x2EF line.long 0x00 "EMACIO0,emac0_tx_clk Mux Selection Register" bitfld.long 0x00 0.--1. " SEL ,emac0_tx_clk Mux Selection Field" "GPIO/LoanIO 0,Reserved,Reserved,RGMII0.TX_CLK" line.long 0x04 "EMACIO1,emac0_tx_d0 Mux Selection Register" bitfld.long 0x04 0.--1. " SEL ,emac0_tx_d0 Mux Selection Field" "GPIO/LoanIO 1,Reserved,USB1.D0,RGMII0.TXD0" line.long 0x08 "EMACIO2,emac0_tx_d1 Mux Selection Register" bitfld.long 0x08 0.--1. " SEL ,emac0_tx_d1 Mux Selection Field" "GPIO/LoanIO 2,Reserved,USB1.D1,RGMII0.TXD1" line.long 0x0C "EMACIO3,emac0_tx_d2 Mux Selection Register" bitfld.long 0x0C 0.--1. " SEL ,emac0_tx_d2 Mux Selection Field" "GPIO/LoanIO 3,Reserved,USB1.D2,RGMII0.TXD2" line.long 0x10 "EMACIO4,emac0_tx_d3 Mux Selection Register" bitfld.long 0x10 0.--1. " SEL ,emac0_tx_d3 Mux Selection Field" "GPIO/LoanIO 4,Reserved,USB1.D3,RGMII0.TXD3" line.long 0x14 "EMACIO5,emac0_rx_d0 Mux Selection Register" bitfld.long 0x14 0.--1. " SEL ,emac0_rx_d0 Mux Selection Field" "GPIO/LoanIO 5,Reserved,USB1.D4,RGMII0.RXD0" line.long 0x18 "EMACIO6,emac0_mdio Mux Selection Register" bitfld.long 0x18 0.--1. " SEL ,emac0_mdio Mux Selection Field" "GPIO/LoanIO 6,I2C2.SDA,USB1.D5,RGMII0.MDIO" line.long 0x1C "EMACIO7,emac0_mdc Mux Selection Register" bitfld.long 0x1C 0.--1. " SEL ,emac0_mdc Mux Selection Field" "GPIO/LoanIO 7,I2C2.SCL,USB1.D6,RGMII0.MDC" line.long 0x20 "EMACIO8,emac0_rx_ctl Mux Selection Register" bitfld.long 0x20 0.--1. " SEL ,emac0_rx_ctl Mux Selection Field" "GPIO/LoanIO 8,Reserved,USB1.D7,RGMII0.RX_CTL" line.long 0x24 "EMACIO9,emac0_tx_ctl Mux Selection Register" bitfld.long 0x24 0.--1. " SEL ,emac0_tx_ctl Mux Selection Field" "GPIO/LoanIO 9,Reserved,Reserved,RGMII0.TX_CTL" line.long 0x28 "EMACIO10,emac0_rx_clk Mux Selection Register" bitfld.long 0x28 0.--1. " SEL ,emac0_rx_clk Mux Selection Field" "GPIO/LoanIO 10,Reserved,USB1.CLK,RGMII0.RX_CLK" line.long 0x2C "EMACIO11,emac0_rx_d1 Mux Selection Register" bitfld.long 0x2C 0.--1. " SEL ,emac0_rx_d1 Mux Selection Field" "GPIO/LoanIO 11,Reserved,USB1.STP,RGMII0.RXD1" line.long 0x30 "EMACIO12,emac0_rx_d2 Mux Selection Register" bitfld.long 0x30 0.--1. " SEL ,emac0_rx_d2 Mux Selection Field" "GPIO/LoanIO 12,Reserved,USB1.DIR,RGMII0.RXD2" line.long 0x34 "EMACIO13,emac0_rx_d3 Mux Selection Register" bitfld.long 0x34 0.--1. " SEL ,emac0_rx_d3 Mux Selection Field" "GPIO/LoanIO 13,Reserved,USB1.NXT,RGMII0.RXD3" line.long 0x38 "EMACIO14,emac1_tx_clk Mux Selection Register" bitfld.long 0x38 0.--1. " SEL ,emac1_tx_clk Mux Selection Field" "GPIO/LoanIO 48,Reserved,Reserved,RGMII1.TX_CLK" line.long 0x3C "EMACIO15,emac1_tx_d0 Mux Selection Register" bitfld.long 0x3C 0.--1. " SEL ,emac1_tx_d0 Mux Selection Field" "GPIO/LoanIO 49,Reserved,Reserved,RGMII1.TXD0" line.long 0x40 "EMACIO16,emac1_tx_d1 Mux Selection Register" bitfld.long 0x40 0.--1. " SEL ,emac1_tx_d1 Mux Selection Field" "GPIO/LoanIO 50,Reserved,Reserved,RGMII1.TXD1" line.long 0x44 "EMACIO17,emac1_tx_ctl Mux Selection Register" bitfld.long 0x44 0.--1. " SEL ,emac1_tx_ctl Mux Selection Field" "GPIO/LoanIO 51,Reserved,Reserved,RGMII1.TX_CTL" line.long 0x48 "EMACIO18,emac1_rx_d0 Mux Selection Register" bitfld.long 0x48 0.--1. " SEL ,emac1_rx_d0 Mux Selection Field" "GPIO/LoanIO 52,Reserved,Reserved,RGMII1.RXD0" line.long 0x4C "EMACIO19,emac1_rx_d1 Mux Selection Register" bitfld.long 0x4C 0.--1. " SEL ,emac1_rx_d1 Mux Selection Field" "GPIO/LoanIO 53,Reserved,Reserved,RGMII1.RXD1" line.long 0x50 "FLASHIO0,sdmmc_cmd Mux Selection Register" bitfld.long 0x50 0.--1. " SEL ,sdmmc_cmd Mux Selection Field" "GPIO/LoanIO 36,Reserved,USB0.D0,SDMMC.CMD" line.long 0x54 "FLASHIO1,sdmmc_pwren Mux Selection Register" bitfld.long 0x54 0.--1. " SEL ,sdmmc_pwren Mux Selection Field" "GPIO/LoanIO 37,Reserved,USB0.D1,SDMMC.PWREN" line.long 0x58 "FLASHIO2,sdmmc_d0 Mux Selection Register" bitfld.long 0x58 0.--1. " SEL ,sdmmc_d0 Mux Selection Field" "GPIO/LoanIO 38,Reserved,USB0.D2,SDMMC.D0" line.long 0x5C "FLASHIO3,sdmmc_d1 Mux Selection Register" bitfld.long 0x5C 0.--1. " SEL ,sdmmc_d1 Mux Selection Field" "GPIO/LoanIO 39,Reserved,USB0.D3,SDMMC.D1" line.long 0x60 "FLASHIO4,sdmmc_d4 Mux Selection Register" bitfld.long 0x60 0.--1. " SEL ,sdmmc_d4 Mux Selection Field" "GPIO/LoanIO 40,Reserved,USB0.D4,SDMMC.D4" line.long 0x64 "FLASHIO5,sdmmc_d5 Mux Selection Register" bitfld.long 0x64 0.--1. " SEL ,sdmmc_d5 Mux Selection Field" "GPIO/LoanIO 41,Reserved,USB0.D5,SDMMC.D5" line.long 0x68 "FLASHIO6,sdmmc_d6 Mux Selection Register" bitfld.long 0x68 0.--1. " SEL ,sdmmc_d6 Mux Selection Field" "GPIO/LoanIO 42,Reserved,USB0.D6,SDMMC.D6" line.long 0x6C "FLASHIO7,sdmmc_d7 Mux Selection Register" bitfld.long 0x6C 0.--1. " SEL ,sdmmc_d7 Mux Selection Field" "GPIO/LoanIO 43,Reserved,USB0.D7,SDMMC.D7" line.long 0x70 "FLASHIO8,sdmmc_clk_in Mux Selection Register" bitfld.long 0x70 0.--1. " SEL ,sdmmc_clk_in Mux Selection Field" "GPIO/LoanIO 44,Reserved,USB0.CLK,SDMMC.CLK_IN" line.long 0x74 "FLASHIO9,sdmmc_clk Mux Selection Register" bitfld.long 0x74 0.--1. " SEL ,sdmmc_clk Mux Selection Field" "GPIO/LoanIO 45,Reserved,USB0.STP,SDMMC.CLK" line.long 0x78 "FLASHIO10,sdmmc_d2 Mux Selection Register" bitfld.long 0x78 0.--1. " SEL ,sdmmc_d2 Mux Selection Field" "GPIO/LoanIO 46,Reserved,USB0.DIR,SDMMC.D2" line.long 0x7C "FLASHIO11,sdmmc_d3 Mux Selection Register" bitfld.long 0x7C 0.--1. " SEL ,sdmmc_d3 Mux Selection Field" "GPIO/LoanIO 47,Reserved,USB0.NXT,SDMMC.D3" line.long 0x80 "GENERALIO0,trace_clk Mux Selection Register" bitfld.long 0x80 0.--1. " SEL ,trace_clk Mux Selection Field" "GPIO/LoanIO 48,Reserved,Reserved,TRACE.CLK" line.long 0x84 "GENERALIO1,trace_d0 Mux Selection Register" bitfld.long 0x84 0.--1. " SEL ,trace_d0 Mux Selection Field" "GPIO/LoanIO 49,UART0.RX,SPIS0.CLK,TRACE.D0" line.long 0x88 "GENERALIO2,trace_d1 Mux Selection Register" bitfld.long 0x88 0.--1. " SEL ,trace_d1 Mux Selection Field" "GPIO/LoanIO 50,UART0.TX,SPIS0.MOSI,TRACE.D1" line.long 0x8C "GENERALIO3,trace_d2 Mux Selection Register" bitfld.long 0x8C 0.--1. " SEL ,trace_d2 Mux Selection Field" "GPIO/LoanIO 51,I2C1.SDA,SPIS0.MISO,TRACE.D2" line.long 0x90 "GENERALIO4,trace_d3 Mux Selection Register" bitfld.long 0x90 0.--1. " SEL ,trace_d3 Mux Selection Field" "GPIO/LoanIO 52,I2C1.SCL,SPIS0.SS0,TRACE.D3" line.long 0x94 "GENERALIO5,trace_d4 Mux Selection Register" bitfld.long 0x94 0.--1. " SEL ,trace_d4 Mux Selection Field" "GPIO/LoanIO 53,CAN1.RX,SPIS0.CLK,TRACE.D4" line.long 0x98 "GENERALIO6,trace_d5 Mux Selection Register" bitfld.long 0x98 0.--1. " SEL ,trace_d5 Mux Selection Field" "GPIO/LoanIO 54,CAN1.TX,SPIS1.MOSI,TRACE.D5" line.long 0x9C "GENERALIO7,trace_d6 Mux Selection Register" bitfld.long 0x9C 0.--1. " SEL ,trace_d6 Mux Selection Field" "GPIO/LoanIO 55,I2C0.SDA,SPIS1.SS0,TRACE.D6" line.long 0xA0 "GENERALIO8,trace_d7 Mux Selection Register" bitfld.long 0xA0 0.--1. " SEL ,trace_d7 Mux Selection Field" "GPIO/LoanIO 56,I2C0.SCL,SPIS1.MISO,TRACE.D7" line.long 0xA4 "GENERALIO9,spim0_clk Mux Selection Register" bitfld.long 0xA4 0.--1. " SEL ,spim0_clk Mux Selection Field" "GPIO/LoanIO 57,UART0.CTS,I2C1.SDA,SPIM0.CLK" line.long 0xA8 "GENERALIO10,spim0_mosi Mux Selection Register" bitfld.long 0xA8 0.--1. " SEL ,spim0_mosi Mux Selection Field" "GPIO/LoanIO 58,UART0.RTS,I2C1.SCL,SPIM0.MOSI" line.long 0xAC "GENERALIO11,spim0_miso Mux Selection Register" bitfld.long 0xAC 0.--1. " SEL ,spim0_miso Mux Selection Field" "GPIO/LoanIO 59,UART1.CTS,CAN1.RX,SPIM0.MISO" line.long 0xB0 "GENERALIO12,spim0_ss0 Mux Selection Register" bitfld.long 0xB0 0.--1. " SEL ,spim0_ss0 Mux Selection Field" "GPIO/LoanIO 60,UART1.RTS,CAN1.TX,SPIM0.SS0" line.long 0xB4 "GENERALIO13,uart0_rx Mux Selection Register" bitfld.long 0xB4 0.--1. " SEL ,uart0_rx Mux Selection Field" "GPIO/LoanIO 61,SPIM0.SS1,CAN0.RX,UART0.RX" line.long 0xB8 "GENERALIO14,uart0_tx Mux Selection Register" bitfld.long 0xB8 0.--1. " SEL ,uart0_tx Mux Selection Field" "GPIO/LoanIO 62,SPIM1.SS1,CAN0.TX,UART0.TX" line.long 0xBC "GENERALIO15,i2c0_sda Mux Selection Register" bitfld.long 0xBC 0.--1. " SEL ,i2c0_sda Mux Selection Field" "GPIO/LoanIO 63,SPIM1.CLK,UART1.RX,I2C0.SDA" line.long 0xC0 "GENERALIO16,i2c0_scl Mux Selection Register" bitfld.long 0xC0 0.--1. " SEL ,can0_rx Mux Selection Field" "GPIO/LoanIO 64,SPIM1.MOSI,UART1.TX,I2C0.SCL" line.long 0xC4 "GENERALIO17,can0_rx Mux Selection Register" bitfld.long 0xC4 0.--1. " SEL ,can0_rx Mux Selection Field" "GPIO/LoanIO 65,SPIM1.MISO,UART0.RX,CAN0.RX" line.long 0xC8 "GENERALIO18,can0_tx Mux Selection Register" bitfld.long 0xC8 0.--1. " SEL ,can0_tx Mux Selection Field" "GPIO/LoanIO 66,SPIM1.SS0,UART0.TX,CAN0.TX" line.long 0xCC "GENERALIO19,spis1_clk Mux Selection Register" bitfld.long 0xCC 0.--1. " SEL ,spis1_clk Mux Selection Field" "GPIO/LoanIO 67,Reserved,SPIM1.CLK,SPIS1.CLK" line.long 0xD0 "GENERALIO20,spis1_mosi Mux Selection Register" bitfld.long 0xD0 0.--1. " SEL ,spis1_mosi Mux Selection Field" "GPIO/LoanIO 68,Reserved,SPIM1.MOSI,SPIS1.MOSI" line.long 0xD4 "GENERALIO21,spis1_miso Mux Selection Register" bitfld.long 0xD4 0.--1. " SEL ,spis1_miso Mux Selection Field" "GPIO/LoanIO 69,Reserved,SPIM1.MISO,SPIS1.MISO" line.long 0xD8 "GENERALIO22,spis1_ss0 Mux Selection Register" bitfld.long 0xD8 0.--1. " SEL ,spis1_ss0 Mux Selection Field" "GPIO/LoanIO 70,Reserved,SPIM1.SS0,SPIS1.SS0" line.long 0xDC "GENERALIO23,uart1_rx Mux Selection Register" bitfld.long 0xDC 0.--1. " SEL ,uart1_rx Mux Selection Field" "GPIO/LoanIO 62,Reserved,SPIM1.SS1,UART1.RX" line.long 0xE0 "GENERALIO24,uart1_tx Mux Selection Register" bitfld.long 0xE0 0.--1. " SEL ,uart1_tx Mux Selection Field" "GPIO/LoanIO 63,Reserved,SPIM0.CLK,UART1.TX" line.long 0xE4 "GENERALIO25,i2c1_sda Mux Selection Register" bitfld.long 0xE4 0.--1. " SEL ,i2c1_sda Mux Selection Field" "GPIO/LoanIO 64,Reserved,SPIM0.MOSI,I2C1.SDA" line.long 0xE8 "GENERALIO26,i2c1_scl Mux Selection Register" bitfld.long 0xE8 0.--1. " SEL ,i2c1_scl Mux Selection Field" "GPIO/LoanIO 65,Reserved,SPIM0.MISO,I2C1.SCL" line.long 0xEC "GENERALIO27,spim0_ss0_alt Mux Selection Register" bitfld.long 0xEC 0.--1. " SEL ,spim0_ss0_alt Mux Selection Field" "GPIO/LoanIO 66,Reserved,SPIM0.SS0,?..." line.long 0xF0 "GENERALIO28,spis0_clk Mux Selection Register" bitfld.long 0xF0 0.--1. " SEL ,spis0_clk Mux Selection Field" "GPIO/LoanIO 67,Reserved,SPIM0.SS1,SPIS0.CLK" line.long 0xF4 "GENERALIO29,spis0_mosi Mux Selection Register" bitfld.long 0xF4 0.--1. " SEL ,spis0_mosi Mux Selection Field" "GPIO/LoanIO 68,Reserved,Reserved,SPIS0.MOSI" line.long 0xF8 "GENERALIO30,spis0_miso Mux Selection Register" bitfld.long 0xF8 0.--1. " SEL ,spis0_miso Mux Selection Field" "GPIO/LoanIO 69,Reserved,Reserved,SPIS0.MISO" line.long 0xFC "GENERALIO31,spis0_ss0 Mux Selection Register" bitfld.long 0xFC 0.--1. " SEL ,spis0_ss0 Mux Selection Field" "GPIO/LoanIO 70,Reserved,Reserved,SPIS0.SS0" line.long 0x100 "MIXED1IO0,nand_ale Mux Selection Register" bitfld.long 0x100 0.--1. " SEL ,nand_ale Mux Selection Field" "GPIO/LoanIO 14,QSPI.SS3,RGMII1.TX_CLK,NAND.ale" line.long 0x104 "MIXED1IO1,nand_ce Mux Selection Register" bitfld.long 0x104 0.--1. " SEL ,nand_ce Mux Selection Field" "GPIO/LoanIO 15,USB1.D0,RGMII1.TXD0,NAND.ce" line.long 0x108 "MIXED1IO2,nand_cle Mux Selection Register" bitfld.long 0x108 0.--1. " SEL ,nand_cle Mux Selection Field" "GPIO/LoanIO 16,USB1.D1,RGMII1.TXD1,NAND.cle" line.long 0x10C "MIXED1IO3,nand_re Mux Selection Register" bitfld.long 0x10C 0.--1. " SEL ,nand_re Mux Selection Field" "GPIO/LoanIO 17,USB1.D2,RGMII1.TXD2,NAND.re" line.long 0x110 "MIXED1IO4,nand_rb Mux Selection Register" bitfld.long 0x110 0.--1. " SEL ,nand_rb Mux Selection Field" "GPIO/LoanIO 18,USB1.D3,RGMII1.TXD3,NAND.rb" line.long 0x114 "MIXED1IO5,nand_dq0 Mux Selection Register" bitfld.long 0x114 0.--1. " SEL ,nand_dq0 Mux Selection Field" "GPIO/LoanIO 19,Reserved,RGMII1.RXD0,NAND.dq0" line.long 0x118 "MIXED1IO6,nand_dq1 Mux Selection Register" bitfld.long 0x118 0.--1. " SEL ,nand_dq1 Mux Selection Field" "GPIO/LoanIO 20,I2C3.SDA,RGMII1.MDIO,NAND.dq1" line.long 0x11C "MIXED1IO7,nand_dq2 Mux Selection Register" bitfld.long 0x11C 0.--1. " SEL ,nand_dq2 Mux Selection Field" "GPIO/LoanIO 21,I2C3.SCL,RGMII1.MDC,NAND.dq2" line.long 0x120 "MIXED1IO8,nand_dq3 Mux Selection Register" bitfld.long 0x120 0.--1. " SEL ,nand_dq3 Mux Selection Field" "GPIO/LoanIO 22,USB1.D4,RGMII1.RX_CTL,NAND.dq3" line.long 0x124 "MIXED1IO9,nand_dq4 Mux Selection Register" bitfld.long 0x124 0.--1. " SEL ,nand_dq4 Mux Selection Field" "GPIO/LoanIO 23,USB1.D5,RGMII1.TX_CTL,NAND.dq4" line.long 0x128 "MIXED1IO10,nand_dq5 Mux Selection Register" bitfld.long 0x128 0.--1. " SEL ,nand_dq5 Mux Selection Field" "GPIO/LoanIO 24,USB1.D6,RGMII1.RX_CLK,NAND.dq5" line.long 0x12C "MIXED1IO11,nand_dq6 Mux Selection Register" bitfld.long 0x12C 0.--1. " SEL ,nand_dq6 Mux Selection Field" "GPIO/LoanIO 25,USB1.D7,RGMII1.RXD1,NAND.dq6" line.long 0x130 "MIXED1IO12,nand_dq7 Mux Selection Register" bitfld.long 0x130 0.--1. " SEL ,nand_dq7 Mux Selection Field" "GPIO/LoanIO 26,Reserved,RGMII1.RXD2,NAND.dq7" line.long 0x134 "MIXED1IO13,nand_wp Mux Selection Register" bitfld.long 0x134 0.--1. " SEL ,nand_wp Mux Selection Field" "GPIO/LoanIO 27,QSPI.SS2,RGMII1.RXD3,NAND.wp" line.long 0x138 "MIXED1IO14,nand_we Mux Selection Register" bitfld.long 0x138 0.--1. " SEL ,nand_we Mux Selection Field" "GPIO/LoanIO 28,Reserved,QSPI.SS1,NAND.we" line.long 0x13C "MIXED1IO15,qspi_io0 Mux Selection Register" bitfld.long 0x13C 0.--1. " SEL ,qspi_io0 Mux Selection Field" "GPIO/LoanIO 29,USB1.CLK,Reserved,QSPI.IO0" line.long 0x140 "MIXED1IO16,qspi_io1 Mux Selection Register" bitfld.long 0x140 0.--1. " SEL ,qspi_io1 Mux Selection Field" "GPIO/LoanIO 30,USB1.STP,Reserved,QSPI.IO1" line.long 0x144 "MIXED1IO17,qspi_io2 Mux Selection Register" bitfld.long 0x144 0.--1. " SEL ,qspi_io2 Mux Selection Field" "GPIO/LoanIO 31,USB1.DIR,Reserved,QSPI.IO2" line.long 0x148 "MIXED1IO18,qspi_io3 Mux Selection Register" bitfld.long 0x148 0.--1. " SEL ,qspi_io3 Mux Selection Field" "GPIO/LoanIO 32,USB1.NXT,Reserved,QSPI.IO3" line.long 0x14C "MIXED1IO19,qspi_ss0 Mux Selection Register" bitfld.long 0x14C 0.--1. " SEL ,qspi_ss0 Mux Selection Field" "GPIO/LoanIO 33,Reserved,Reserved,QSPI.SS0" line.long 0x150 "MIXED1IO20,qpsi_clk Mux Selection Register" bitfld.long 0x150 0.--1. " SEL ,qpsi_clk Mux Selection Field" "GPIO/LoanIO 34,Reserved,Reserved,QSPI.CLK" line.long 0x154 "MIXED1IO21,qspi_ss1 Mux Selection Register" bitfld.long 0x154 0.--1. " SEL ,qspi_ss1 Mux Selection Field" "GPIO/LoanIO 35,Reserved,Reserved,QSPI.SS1" line.long 0x158 "MIXED2IO0,emac1_mdio Mux Selection Register" bitfld.long 0x158 0.--1. " SEL ,emac1_mdio Mux Selection Field" "GPIO/LoanIO 54,SPIS0.CLK,SPIM0.CLK,RGMII1.MDIO" line.long 0x15C "MIXED2IO1,emac1_mdc Mux Selection Register" bitfld.long 0x15C 0.--1. " SEL ,emac1_mdc Mux Selection Field" "GPIO/LoanIO 55,SPIS0.MOSI,SPIM0.MOSI,RGMII1.MDC" line.long 0x160 "MIXED2IO2,emac1_tx_d2 Mux Selection Register" bitfld.long 0x160 0.--1. " SEL ,emac1_tx_d2 Mux Selection Field" "GPIO/LoanIO 56,SPIS0.MISO,SPIM0.MISO,RGMII1.TXD2" line.long 0x164 "MIXED2IO3,emac1_tx_d3 Mux Selection Register" bitfld.long 0x164 0.--1. " SEL ,emac1_tx_d3 Mux Selection Field" "GPIO/LoanIO 57,SPIS0.SS0,SPIM0.SS0,RGMII1.TXD3" line.long 0x168 "MIXED2IO4,emac1_rx_clk Mux Selection Register" bitfld.long 0x168 0.--1. " SEL ,emac1_rx_clk Mux Selection Field" "GPIO/LoanIO 58,SPIM1.CLK,SPIS1.CLK,RGMII1.RX_CLK" line.long 0x16C "MIXED2IO5,emac1_rx_ctl Mux Selection Register" bitfld.long 0x16C 0.--1. " SEL ,emac1_rx_ctl Mux Selection Field" "GPIO/LoanIO 59,SPIM1.MOSI,SPIS1.MOSI,RGMII1.RX_CTL" line.long 0x170 "MIXED2IO6,emac1_rx_d2 Mux Selection Register" bitfld.long 0x170 0.--1. " SEL ,emac1_rx_d2 Mux Selection Field" "GPIO/LoanIO 60,SPIM1.MISO,SPIS1.MISO,RGMII1.RXD2" line.long 0x174 "MIXED2IO7,emac1_rx_d3 Mux Selection Register" bitfld.long 0x174 0.--1. " SEL ,emac1_rx_d3 Mux Selection Field" "GPIO/LoanIO 61,SPIM1.SS0,SPIS1.SS0,RGMII1.RXD3" line.long 0x178 "GPLINMUX48,GPIO/LoanIO 48 Input Mux Selection Register" bitfld.long 0x178 0. " SEL ,GPIO/Loan IO48Input Mux Selection Field" "GENERALIO0,EMACIO14" line.long 0x17C "GPLINMUX49,GPIO/LoanIO 49 Input Mux Selection Register" bitfld.long 0x17C 0. " SEL ,GPIO/Loan IO49Input Mux Selection Field" "GENERALIO1,EMACIO15" line.long 0x180 "GPLINMUX50,GPIO/LoanIO 50 Input Mux Selection Register" bitfld.long 0x180 0. " SEL ,GPIO/Loan IO50Input Mux Selection Field" "GENERALIO2,EMACIO16" line.long 0x184 "GPLINMUX51,GPIO/LoanIO 51 Input Mux Selection Register" bitfld.long 0x184 0. " SEL ,GPIO/Loan IO51Input Mux Selection Field" "GENERALIO3,EMACIO17" line.long 0x188 "GPLINMUX52,GPIO/LoanIO 52 Input Mux Selection Register" bitfld.long 0x188 0. " SEL ,GPIO/Loan IO52Input Mux Selection Field" "GENERALIO4,EMACIO18" line.long 0x18C "GPLINMUX53,GPIO/LoanIO 53 Input Mux Selection Register" bitfld.long 0x18C 0. " SEL ,GPIO/Loan IO53Input Mux Selection Field" "GENERALIO5,EMACIO19" line.long 0x190 "GPLINMUX54,GPIO/LoanIO 54 Input Mux Selection Register" bitfld.long 0x190 0. " SEL ,GPIO/Loan IO54Input Mux Selection Field" "GENERALIO6,MIXED2IO0" line.long 0x194 "GPLINMUX55,GPIO/LoanIO 55 Input Mux Selection Register" bitfld.long 0x194 0. " SEL ,GPIO/Loan IO55Input Mux Selection Field" "GENERALIO7,MIXED2IO1" line.long 0x198 "GPLINMUX56,GPIO/LoanIO 56 Input Mux Selection Register" bitfld.long 0x198 0. " SEL ,GPIO/Loan IO56Input Mux Selection Field" "GENERALIO8,MIXED2IO2" line.long 0x19C "GPLINMUX57,GPIO/LoanIO 57 Input Mux Selection Register" bitfld.long 0x19C 0. " SEL ,GPIO/Loan IO57Input Mux Selection Field" "GENERALIO9,MIXED2IO3" line.long 0x1A0 "GPLINMUX58,GPIO/LoanIO 58 Input Mux Selection Register" bitfld.long 0x1A0 0. " SEL ,GPIO/Loan IO58Input Mux Selection Field" "GENERALIO10,MIXED2IO4" line.long 0x1A4 "GPLINMUX59,GPIO/LoanIO 59 Input Mux Selection Register" bitfld.long 0x1A4 0. " SEL ,GPIO/Loan IO59Input Mux Selection Field" "GENERALIO11,MIXED2IO5" line.long 0x1A8 "GPLINMUX60,GPIO/LoanIO 60 Input Mux Selection Register" bitfld.long 0x1A8 0. " SEL ,GPIO/Loan IO60Input Mux Selection Field" "GENERALIO12,MIXED2IO6" line.long 0x1AC "GPLINMUX61,GPIO/LoanIO 61 Input Mux Selection Register" bitfld.long 0x1AC 0. " SEL ,GPIO/Loan IO61Input Mux Selection Field" "GENERALIO13,MIXED2IO7" line.long 0x1B0 "GPLINMUX62,GPIO/LoanIO 62 Input Mux Selection Register" bitfld.long 0x1B0 0. " SEL ,GPIO/Loan IO62Input Mux Selection Field" "GENERALIO14,GENERALIO23" line.long 0x1B4 "GPLINMUX63,GPIO/LoanIO 63 Input Mux Selection Register" bitfld.long 0x1B4 0. " SEL ,GPIO/Loan IO63Input Mux Selection Field" "GENERALIO15,GENERALIO24" line.long 0x1B8 "GPLINMUX64,GPIO/LoanIO 64 Input Mux Selection Register" bitfld.long 0x1B8 0. " SEL ,GPIO/Loan IO64Input Mux Selection Field" "GENERALIO16,GENERALIO25" line.long 0x1BC "GPLINMUX65,GPIO/LoanIO 65 Input Mux Selection Register" bitfld.long 0x1BC 0. " SEL ,GPIO/Loan IO65Input Mux Selection Field" "GENERALIO17,GENERALIO26" line.long 0x1C0 "GPLINMUX66,GPIO/LoanIO 66 Input Mux Selection Register" bitfld.long 0x1C0 0. " SEL ,GPIO/Loan IO66Input Mux Selection Field" "GENERALIO18,GENERALIO27" line.long 0x1C4 "GPLINMUX67,GPIO/LoanIO 67 Input Mux Selection Register" bitfld.long 0x1C4 0. " SEL ,GPIO/Loan IO67Input Mux Selection Field" "GENERALIO19,GENERALIO28" line.long 0x1C8 "GPLINMUX68,GPIO/LoanIO 68 Input Mux Selection Register" bitfld.long 0x1C8 0. " SEL ,GPIO/Loan IO68Input Mux Selection Field" "GENERALIO20,GENERALIO29" line.long 0x1CC "GPLINMUX69,GPIO/LoanIO 69 Input Mux Selection Register" bitfld.long 0x1CC 0. " SEL ,GPIO/Loan IO69Input Mux Selection Field" "GENERALIO21,GENERALIO30" line.long 0x1D0 "GPLINMUX70,GPIO/LoanIO 70 Input Mux Selection Register" bitfld.long 0x1D0 0. " SEL ,GPIO/Loan IO70Input Mux Selection Field" "GENERALIO22,GENERALIO31" line.long 0x1D4 "GPLMUX0,GPIO/LoanIO 0 Output/Output Enable Mux Selection Register" bitfld.long 0x1D4 0. " SEL ,GPIO/Loan IO0Input Mux Selection Field" "GPIO/LOANIO[0],GPIO/LOANI[0]" line.long 0x1D8 "GPLMUX1,GPIO/LoanIO 1 Output/Output Enable Mux Selection Register" bitfld.long 0x1D8 0. " SEL ,GPIO/Loan IO1Input Mux Selection Field" "GPIO/LOANIO[1],GPIO/LOANI[1]" line.long 0x1DC "GPLMUX2,GPIO/LoanIO 2 Output/Output Enable Mux Selection Register" bitfld.long 0x1DC 0. " SEL ,GPIO/Loan IO2Input Mux Selection Field" "GPIO/LOANIO[2],GPIO/LOANI[2]" line.long 0x1E0 "GPLMUX3,GPIO/LoanIO 3 Output/Output Enable Mux Selection Register" bitfld.long 0x1E0 0. " SEL ,GPIO/Loan IO3Input Mux Selection Field" "GPIO/LOANIO[3],GPIO/LOANI[3]" line.long 0x1E4 "GPLMUX4,GPIO/LoanIO 4 Output/Output Enable Mux Selection Register" bitfld.long 0x1E4 0. " SEL ,GPIO/Loan IO4Input Mux Selection Field" "GPIO/LOANIO[4],GPIO/LOANI[4]" line.long 0x1E8 "GPLMUX5,GPIO/LoanIO 5 Output/Output Enable Mux Selection Register" bitfld.long 0x1E8 0. " SEL ,GPIO/Loan IO5Input Mux Selection Field" "GPIO/LOANIO[5],GPIO/LOANI[5]" line.long 0x1EC "GPLMUX6,GPIO/LoanIO 6 Output/Output Enable Mux Selection Register" bitfld.long 0x1EC 0. " SEL ,GPIO/Loan IO6Input Mux Selection Field" "GPIO/LOANIO[6],GPIO/LOANI[6]" line.long 0x1F0 "GPLMUX7,GPIO/LoanIO 7 Output/Output Enable Mux Selection Register" bitfld.long 0x1F0 0. " SEL ,GPIO/Loan IO7Input Mux Selection Field" "GPIO/LOANIO[7],GPIO/LOANI[7]" line.long 0x1F4 "GPLMUX8,GPIO/LoanIO 8 Output/Output Enable Mux Selection Register" bitfld.long 0x1F4 0. " SEL ,GPIO/Loan IO8Input Mux Selection Field" "GPIO/LOANIO[8],GPIO/LOANI[8]" line.long 0x1F8 "GPLMUX9,GPIO/LoanIO 9 Output/Output Enable Mux Selection Register" bitfld.long 0x1F8 0. " SEL ,GPIO/Loan IO9Input Mux Selection Field" "GPIO/LOANIO[9],GPIO/LOANI[9]" line.long 0x1FC "GPLMUX10,GPIO/LoanIO 10 Output/Output Enable Mux Selection Register" bitfld.long 0x1FC 0. " SEL ,GPIO/Loan IO10Input Mux Selection Field" "GPIO/LOANIO[10],GPIO/LOANI[10]" line.long 0x200 "GPLMUX11,GPIO/LoanIO 11 Output/Output Enable Mux Selection Register" bitfld.long 0x200 0. " SEL ,GPIO/Loan IO11Input Mux Selection Field" "GPIO/LOANIO[11],GPIO/LOANI[11]" line.long 0x204 "GPLMUX12,GPIO/LoanIO 12 Output/Output Enable Mux Selection Register" bitfld.long 0x204 0. " SEL ,GPIO/Loan IO12Input Mux Selection Field" "GPIO/LOANIO[12],GPIO/LOANI[12]" line.long 0x208 "GPLMUX13,GPIO/LoanIO 13 Output/Output Enable Mux Selection Register" bitfld.long 0x208 0. " SEL ,GPIO/Loan IO13Input Mux Selection Field" "GPIO/LOANIO[13],GPIO/LOANI[13]" line.long 0x20C "GPLMUX14,GPIO/LoanIO 14 Output/Output Enable Mux Selection Register" bitfld.long 0x20C 0. " SEL ,GPIO/Loan IO14Input Mux Selection Field" "GPIO/LOANIO[14],GPIO/LOANI[14]" line.long 0x210 "GPLMUX15,GPIO/LoanIO 15 Output/Output Enable Mux Selection Register" bitfld.long 0x210 0. " SEL ,GPIO/Loan IO15Input Mux Selection Field" "GPIO/LOANIO[15],GPIO/LOANI[15]" line.long 0x214 "GPLMUX16,GPIO/LoanIO 16 Output/Output Enable Mux Selection Register" bitfld.long 0x214 0. " SEL ,GPIO/Loan IO16Input Mux Selection Field" "GPIO/LOANIO[16],GPIO/LOANI[16]" line.long 0x218 "GPLMUX17,GPIO/LoanIO 17 Output/Output Enable Mux Selection Register" bitfld.long 0x218 0. " SEL ,GPIO/Loan IO17Input Mux Selection Field" "GPIO/LOANIO[17],GPIO/LOANI[17]" line.long 0x21C "GPLMUX18,GPIO/LoanIO 18 Output/Output Enable Mux Selection Register" bitfld.long 0x21C 0. " SEL ,GPIO/Loan IO18Input Mux Selection Field" "GPIO/LOANIO[18],GPIO/LOANI[18]" line.long 0x220 "GPLMUX19,GPIO/LoanIO 19 Output/Output Enable Mux Selection Register" bitfld.long 0x220 0. " SEL ,GPIO/Loan IO19Input Mux Selection Field" "GPIO/LOANIO[19],GPIO/LOANI[19]" line.long 0x224 "GPLMUX20,GPIO/LoanIO 20 Output/Output Enable Mux Selection Register" bitfld.long 0x224 0. " SEL ,GPIO/Loan IO20Input Mux Selection Field" "GPIO/LOANIO[20],GPIO/LOANI[20]" line.long 0x228 "GPLMUX21,GPIO/LoanIO 21 Output/Output Enable Mux Selection Register" bitfld.long 0x228 0. " SEL ,GPIO/Loan IO21Input Mux Selection Field" "GPIO/LOANIO[21],GPIO/LOANI[21]" line.long 0x22C "GPLMUX22,GPIO/LoanIO 22 Output/Output Enable Mux Selection Register" bitfld.long 0x22C 0. " SEL ,GPIO/Loan IO22Input Mux Selection Field" "GPIO/LOANIO[22],GPIO/LOANI[22]" line.long 0x230 "GPLMUX23,GPIO/LoanIO 23 Output/Output Enable Mux Selection Register" bitfld.long 0x230 0. " SEL ,GPIO/Loan IO23Input Mux Selection Field" "GPIO/LOANIO[23],GPIO/LOANI[23]" line.long 0x234 "GPLMUX24,GPIO/LoanIO 24 Output/Output Enable Mux Selection Register" bitfld.long 0x234 0. " SEL ,GPIO/Loan IO24Input Mux Selection Field" "GPIO/LOANIO[24],GPIO/LOANI[24]" line.long 0x238 "GPLMUX25,GPIO/LoanIO 25 Output/Output Enable Mux Selection Register" bitfld.long 0x238 0. " SEL ,GPIO/Loan IO25Input Mux Selection Field" "GPIO/LOANIO[25],GPIO/LOANI[25]" line.long 0x23C "GPLMUX26,GPIO/LoanIO 26 Output/Output Enable Mux Selection Register" bitfld.long 0x23C 0. " SEL ,GPIO/Loan IO26Input Mux Selection Field" "GPIO/LOANIO[26],GPIO/LOANI[26]" line.long 0x240 "GPLMUX27,GPIO/LoanIO 27 Output/Output Enable Mux Selection Register" bitfld.long 0x240 0. " SEL ,GPIO/Loan IO27Input Mux Selection Field" "GPIO/LOANIO[27],GPIO/LOANI[27]" line.long 0x244 "GPLMUX28,GPIO/LoanIO 28 Output/Output Enable Mux Selection Register" bitfld.long 0x244 0. " SEL ,GPIO/Loan IO28Input Mux Selection Field" "GPIO/LOANIO[28],GPIO/LOANI[28]" line.long 0x248 "GPLMUX29,GPIO/LoanIO 29 Output/Output Enable Mux Selection Register" bitfld.long 0x248 0. " SEL ,GPIO/Loan IO29Input Mux Selection Field" "GPIO/LOANIO[29],GPIO/LOANI[29]" line.long 0x24C "GPLMUX30,GPIO/LoanIO 30 Output/Output Enable Mux Selection Register" bitfld.long 0x24C 0. " SEL ,GPIO/Loan IO30Input Mux Selection Field" "GPIO/LOANIO[30],GPIO/LOANI[30]" line.long 0x250 "GPLMUX31,GPIO/LoanIO 31 Output/Output Enable Mux Selection Register" bitfld.long 0x250 0. " SEL ,GPIO/Loan IO31Input Mux Selection Field" "GPIO/LOANIO[31],GPIO/LOANI[31]" line.long 0x254 "GPLMUX32,GPIO/LoanIO 32 Output/Output Enable Mux Selection Register" bitfld.long 0x254 0. " SEL ,GPIO/Loan IO32Input Mux Selection Field" "GPIO/LOANIO[32],GPIO/LOANI[32]" line.long 0x258 "GPLMUX33,GPIO/LoanIO 33 Output/Output Enable Mux Selection Register" bitfld.long 0x258 0. " SEL ,GPIO/Loan IO33Input Mux Selection Field" "GPIO/LOANIO[33],GPIO/LOANI[33]" line.long 0x25C "GPLMUX34,GPIO/LoanIO 34 Output/Output Enable Mux Selection Register" bitfld.long 0x25C 0. " SEL ,GPIO/Loan IO34Input Mux Selection Field" "GPIO/LOANIO[34],GPIO/LOANI[34]" line.long 0x260 "GPLMUX35,GPIO/LoanIO 35 Output/Output Enable Mux Selection Register" bitfld.long 0x260 0. " SEL ,GPIO/Loan IO35Input Mux Selection Field" "GPIO/LOANIO[35],GPIO/LOANI[35]" line.long 0x264 "GPLMUX36,GPIO/LoanIO 36 Output/Output Enable Mux Selection Register" bitfld.long 0x264 0. " SEL ,GPIO/Loan IO36Input Mux Selection Field" "GPIO/LOANIO[36],GPIO/LOANI[36]" line.long 0x268 "GPLMUX37,GPIO/LoanIO 37 Output/Output Enable Mux Selection Register" bitfld.long 0x268 0. " SEL ,GPIO/Loan IO37Input Mux Selection Field" "GPIO/LOANIO[37],GPIO/LOANI[37]" line.long 0x26C "GPLMUX38,GPIO/LoanIO 38 Output/Output Enable Mux Selection Register" bitfld.long 0x26C 0. " SEL ,GPIO/Loan IO38Input Mux Selection Field" "GPIO/LOANIO[38],GPIO/LOANI[38]" line.long 0x270 "GPLMUX39,GPIO/LoanIO 39 Output/Output Enable Mux Selection Register" bitfld.long 0x270 0. " SEL ,GPIO/Loan IO39Input Mux Selection Field" "GPIO/LOANIO[39],GPIO/LOANI[39]" line.long 0x274 "GPLMUX40,GPIO/LoanIO 40 Output/Output Enable Mux Selection Register" bitfld.long 0x274 0. " SEL ,GPIO/Loan IO40Input Mux Selection Field" "GPIO/LOANIO[40],GPIO/LOANI[40]" line.long 0x278 "GPLMUX41,GPIO/LoanIO 41 Output/Output Enable Mux Selection Register" bitfld.long 0x278 0. " SEL ,GPIO/Loan IO41Input Mux Selection Field" "GPIO/LOANIO[41],GPIO/LOANI[41]" line.long 0x27C "GPLMUX42,GPIO/LoanIO 42 Output/Output Enable Mux Selection Register" bitfld.long 0x27C 0. " SEL ,GPIO/Loan IO42Input Mux Selection Field" "GPIO/LOANIO[42],GPIO/LOANI[42]" line.long 0x280 "GPLMUX43,GPIO/LoanIO 43 Output/Output Enable Mux Selection Register" bitfld.long 0x280 0. " SEL ,GPIO/Loan IO43Input Mux Selection Field" "GPIO/LOANIO[43],GPIO/LOANI[43]" line.long 0x284 "GPLMUX44,GPIO/LoanIO 44 Output/Output Enable Mux Selection Register" bitfld.long 0x284 0. " SEL ,GPIO/Loan IO44Input Mux Selection Field" "GPIO/LOANIO[44],GPIO/LOANI[44]" line.long 0x288 "GPLMUX45,GPIO/LoanIO 45 Output/Output Enable Mux Selection Register" bitfld.long 0x288 0. " SEL ,GPIO/Loan IO45Input Mux Selection Field" "GPIO/LOANIO[45],GPIO/LOANI[45]" line.long 0x28C "GPLMUX46,GPIO/LoanIO 46 Output/Output Enable Mux Selection Register" bitfld.long 0x28C 0. " SEL ,GPIO/Loan IO46Input Mux Selection Field" "GPIO/LOANIO[46],GPIO/LOANI[46]" line.long 0x290 "GPLMUX47,GPIO/LoanIO 47 Output/Output Enable Mux Selection Register" bitfld.long 0x290 0. " SEL ,GPIO/Loan IO47Input Mux Selection Field" "GPIO/LOANIO[47],GPIO/LOANI[47]" line.long 0x294 "GPLMUX48,GPIO/LoanIO 48 Output/Output Enable Mux Selection Register" bitfld.long 0x294 0. " SEL ,GPIO/Loan IO48Input Mux Selection Field" "GPIO/LOANIO[48],GPIO/LOANI[48]" line.long 0x298 "GPLMUX49,GPIO/LoanIO 49 Output/Output Enable Mux Selection Register" bitfld.long 0x298 0. " SEL ,GPIO/Loan IO49Input Mux Selection Field" "GPIO/LOANIO[49],GPIO/LOANI[49]" line.long 0x29C "GPLMUX50,GPIO/LoanIO 50 Output/Output Enable Mux Selection Register" bitfld.long 0x29C 0. " SEL ,GPIO/Loan IO50Input Mux Selection Field" "GPIO/LOANIO[50],GPIO/LOANI[50]" line.long 0x2A0 "GPLMUX51,GPIO/LoanIO 51 Output/Output Enable Mux Selection Register" bitfld.long 0x2A0 0. " SEL ,GPIO/Loan IO51Input Mux Selection Field" "GPIO/LOANIO[51],GPIO/LOANI[51]" line.long 0x2A4 "GPLMUX52,GPIO/LoanIO 52 Output/Output Enable Mux Selection Register" bitfld.long 0x2A4 0. " SEL ,GPIO/Loan IO52Input Mux Selection Field" "GPIO/LOANIO[52],GPIO/LOANI[52]" line.long 0x2A8 "GPLMUX53,GPIO/LoanIO 53 Output/Output Enable Mux Selection Register" bitfld.long 0x2A8 0. " SEL ,GPIO/Loan IO53Input Mux Selection Field" "GPIO/LOANIO[53],GPIO/LOANI[53]" line.long 0x2AC "GPLMUX54,GPIO/LoanIO 54 Output/Output Enable Mux Selection Register" bitfld.long 0x2AC 0. " SEL ,GPIO/Loan IO54Input Mux Selection Field" "GPIO/LOANIO[54],GPIO/LOANI[54]" line.long 0x2B0 "GPLMUX55,GPIO/LoanIO 55 Output/Output Enable Mux Selection Register" bitfld.long 0x2B0 0. " SEL ,GPIO/Loan IO55Input Mux Selection Field" "GPIO/LOANIO[55],GPIO/LOANI[55]" line.long 0x2B4 "GPLMUX56,GPIO/LoanIO 56 Output/Output Enable Mux Selection Register" bitfld.long 0x2B4 0. " SEL ,GPIO/Loan IO56Input Mux Selection Field" "GPIO/LOANIO[56],GPIO/LOANI[56]" line.long 0x2B8 "GPLMUX57,GPIO/LoanIO 57 Output/Output Enable Mux Selection Register" bitfld.long 0x2B8 0. " SEL ,GPIO/Loan IO57Input Mux Selection Field" "GPIO/LOANIO[57],GPIO/LOANI[57]" line.long 0x2BC "GPLMUX58,GPIO/LoanIO 58 Output/Output Enable Mux Selection Register" bitfld.long 0x2BC 0. " SEL ,GPIO/Loan IO58Input Mux Selection Field" "GPIO/LOANIO[58],GPIO/LOANI[58]" line.long 0x2C0 "GPLMUX59,GPIO/LoanIO 59 Output/Output Enable Mux Selection Register" bitfld.long 0x2C0 0. " SEL ,GPIO/Loan IO59Input Mux Selection Field" "GPIO/LOANIO[59],GPIO/LOANI[59]" line.long 0x2C4 "GPLMUX60,GPIO/LoanIO 60 Output/Output Enable Mux Selection Register" bitfld.long 0x2C4 0. " SEL ,GPIO/Loan IO60Input Mux Selection Field" "GPIO/LOANIO[60],GPIO/LOANI[60]" line.long 0x2C8 "GPLMUX61,GPIO/LoanIO 61 Output/Output Enable Mux Selection Register" bitfld.long 0x2C8 0. " SEL ,GPIO/Loan IO61Input Mux Selection Field" "GPIO/LOANIO[61],GPIO/LOANI[61]" line.long 0x2CC "GPLMUX62,GPIO/LoanIO 62 Output/Output Enable Mux Selection Register" bitfld.long 0x2CC 0. " SEL ,GPIO/Loan IO62Input Mux Selection Field" "GPIO/LOANIO[62],GPIO/LOANI[62]" line.long 0x2D0 "GPLMUX63,GPIO/LoanIO 63 Output/Output Enable Mux Selection Register" bitfld.long 0x2D0 0. " SEL ,GPIO/Loan IO63Input Mux Selection Field" "GPIO/LOANIO[63],GPIO/LOANI[63]" line.long 0x2D4 "GPLMUX64,GPIO/LoanIO 64 Output/Output Enable Mux Selection Register" bitfld.long 0x2D4 0. " SEL ,GPIO/Loan IO64Input Mux Selection Field" "GPIO/LOANIO[64],GPIO/LOANI[64]" line.long 0x2D8 "GPLMUX65,GPIO/LoanIO 65 Output/Output Enable Mux Selection Register" bitfld.long 0x2D8 0. " SEL ,GPIO/Loan IO65Input Mux Selection Field" "GPIO/LOANIO[65],GPIO/LOANI[65]" line.long 0x2DC "GPLMUX66,GPIO/LoanIO 66 Output/Output Enable Mux Selection Register" bitfld.long 0x2DC 0. " SEL ,GPIO/Loan IO66Input Mux Selection Field" "GPIO/LOANIO[66],GPIO/LOANI[66]" line.long 0x2E0 "GPLMUX67,GPIO/LoanIO 67 Output/Output Enable Mux Selection Register" bitfld.long 0x2E0 0. " SEL ,GPIO/Loan IO67Input Mux Selection Field" "GPIO/LOANIO[67],GPIO/LOANI[67]" line.long 0x2E4 "GPLMUX68,GPIO/LoanIO 68 Output/Output Enable Mux Selection Register" bitfld.long 0x2E4 0. " SEL ,GPIO/Loan IO68Input Mux Selection Field" "GPIO/LOANIO[68],GPIO/LOANI[68]" line.long 0x2E8 "GPLMUX69,GPIO/LoanIO 69 Output/Output Enable Mux Selection Register" bitfld.long 0x2E8 0. " SEL ,GPIO/Loan IO69Input Mux Selection Field" "GPIO/LOANIO[69],GPIO/LOANI[69]" line.long 0x2EC "GPLMUX70,GPIO/LoanIO 70 Output/Output Enable Mux Selection Register" bitfld.long 0x2EC 0. " SEL ,GPIO/Loan IO70Input Mux Selection Field" "GPIO/LOANIO[70],GPIO/LOANI[70]" group.long 0x6F0++0x3 line.long 0x00 "NANDUSEFPGA,Select source for NAND signals (HPS Pins or FPGA Interface)" bitfld.long 0x00 0. " SEL ,Selection for NAND signals" "HPS Pins,FPGA Inteface" group.long 0x6F8++0x3 line.long 0x00 "RGMII1USEFPGA,Select source for RGMII1 signals (HPS Pins or FPGA Interface)" bitfld.long 0x00 0. " SEL ,Selection for RGMII1 signals" "HPS Pins,FPGA Inteface" group.long 0x704++0x3 line.long 0x00 "I2C0USEFPGA,Select source for I2C0 signals (HPS Pins or FPGA Interface)" bitfld.long 0x00 0. " SEL ,Selection for I2C0 signals" "HPS Pins,FPGA Inteface" group.long 0x714++0x3 line.long 0x00 "RGMII0USEFPGA,Select source for RGMII0 signals (HPS Pins or FPGA Interface)" bitfld.long 0x00 0. " SEL ,Selection for RGMII0 signals" "HPS Pins,FPGA Inteface" group.long 0x724++0xF line.long 0x00 "I2C3USEFPGA,Select source for I2C3 signals (HPS Pins or FPGA Interface)" bitfld.long 0x00 0. " SEL ,Selection for I2C3 signals" "HPS Pins,FPGA Inteface" line.long 0x04 "I2C2USEFPGA,Select source for I2C2 signals (HPS Pins or FPGA Interface)" bitfld.long 0x04 0. " SEL ,Selection for I2C2 signals" "HPS Pins,FPGA Inteface" line.long 0x08 "I2C1USEFPGA,Select source for I2C1 signals (HPS Pins or FPGA Interface)" bitfld.long 0x08 0. " SEL ,Selection for I2C1 signals" "HPS Pins,FPGA Inteface" line.long 0x0C "SPIM1USEFPGA,Select source for SPIM1 signals (HPS Pins or FPGA Interface)" bitfld.long 0x0C 0. " SEL ,Selection for SPIM1 signals" "HPS Pins,FPGA Inteface" group.long 0x738++0x3 line.long 0x00 "SPIM0USEFPGA,Select source for SPIM0 signals (HPS Pins or FPGA Interface)" bitfld.long 0x00 0. " SEL ,Selection for SPIM0 signals" "HPS Pins,FPGA Inteface" tree.end width 0xB tree.end tree "DMANONSECURE (Nonsecure DMA Module Address Space)" base ad:0xFFE00000 width 23. group.long 0x00++0x07 line.long 0x00 "DSR,DMA manager status register" bitfld.long 0x00 9. " DNS ,Provides the security status of the DMA manager thread" "Secure,Non-secure" bitfld.long 0x00 4.--8. " WAKEUP_EVENT ,Wakeup event" "Event[0],Event[1],Event[2],Event[3],Event[4],Event[5],Event[6],Event[7],Event[8],Event[9],Event[10],Event[11],Event[12],Event[13],Event[14],Event[15],Event[16],Event[17],Event[18],Event[19],Event[20],Event[21],Event[22],Event[23],Event[24],Event[25],Event[26],Event[27],Event[28],Event[29],Event[30],Event[31]" bitfld.long 0x00 0.--3. " DMA_STATUS ,The operating state of the DMA manager" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Faulting" line.long 0x04 "DPC,DMA Program Counter Register" group.long 0x20++0x03 line.long 0x00 "INTEN,Interrupt enable register" bitfld.long 0x00 31. " EVENT_IRQ_SELECT[31] ,Event Interrupt Request Enable 31" "Disabled,Enabled" bitfld.long 0x00 30. " EVENT_IRQ_SELECT[30] ,Event Interrupt Request Enable 30" "Disabled,Enabled" bitfld.long 0x00 29. " EVENT_IRQ_SELECT[29] ,Event Interrupt Request Enable 29" "Disabled,Enabled" bitfld.long 0x00 28. " EVENT_IRQ_SELECT[28] ,Event Interrupt Request Enable 28" "Disabled,Enabled" textline " " bitfld.long 0x00 27. " EVENT_IRQ_SELECT[27] ,Event Interrupt Request Enable 27" "Disabled,Enabled" bitfld.long 0x00 26. " EVENT_IRQ_SELECT[26] ,Event Interrupt Request Enable 26" "Disabled,Enabled" bitfld.long 0x00 25. " EVENT_IRQ_SELECT[25] ,Event Interrupt Request Enable 25" "Disabled,Enabled" bitfld.long 0x00 24. " EVENT_IRQ_SELECT[24] ,Event Interrupt Request Enable 24" "Disabled,Enabled" textline " " bitfld.long 0x00 23. " EVENT_IRQ_SELECT[23] ,Event Interrupt Request Enable 23" "Disabled,Enabled" bitfld.long 0x00 22. " EVENT_IRQ_SELECT[22] ,Event Interrupt Request Enable 22" "Disabled,Enabled" bitfld.long 0x00 21. " EVENT_IRQ_SELECT[21] ,Event Interrupt Request Enable 21" "Disabled,Enabled" bitfld.long 0x00 20. " EVENT_IRQ_SELECT[20] ,Event Interrupt Request Enable 20" "Disabled,Enabled" textline " " bitfld.long 0x00 19. " EVENT_IRQ_SELECT[19] ,Event Interrupt Request Enable 19" "Disabled,Enabled" bitfld.long 0x00 18. " EVENT_IRQ_SELECT[18] ,Event Interrupt Request Enable 18" "Disabled,Enabled" bitfld.long 0x00 17. " EVENT_IRQ_SELECT[17] ,Event Interrupt Request Enable 17" "Disabled,Enabled" bitfld.long 0x00 16. " EVENT_IRQ_SELECT[16] ,Event Interrupt Request Enable 16" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EVENT_IRQ_SELECT[15] ,Event Interrupt Request Enable 15" "Disabled,Enabled" bitfld.long 0x00 14. " EVENT_IRQ_SELECT[14] ,Event Interrupt Request Enable 14" "Disabled,Enabled" bitfld.long 0x00 13. " EVENT_IRQ_SELECT[13] ,Event Interrupt Request Enable 13" "Disabled,Enabled" bitfld.long 0x00 12. " EVENT_IRQ_SELECT[12] ,Event Interrupt Request Enable 12" "Disabled,Enabled" textline " " bitfld.long 0x00 11. " EVENT_IRQ_SELECT[11] ,Event Interrupt Request Enable 11" "Disabled,Enabled" bitfld.long 0x00 10. " EVENT_IRQ_SELECT[10] ,Event Interrupt Request Enable 10" "Disabled,Enabled" bitfld.long 0x00 9. " EVENT_IRQ_SELECT[9] ,Event Interrupt Request Enable 9" "Disabled,Enabled" bitfld.long 0x00 8. " EVENT_IRQ_SELECT[8] ,Event Interrupt Request Enable 8" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " EVENT_IRQ_SELECT[7] ,Event Interrupt Request Enable 7" "Disabled,Enabled" bitfld.long 0x00 6. " EVENT_IRQ_SELECT[6] ,Event Interrupt Request Enable 6" "Disabled,Enabled" bitfld.long 0x00 5. " EVENT_IRQ_SELECT[5] ,Event Interrupt Request Enable 5" "Disabled,Enabled" bitfld.long 0x00 4. " EVENT_IRQ_SELECT[4] ,Event Interrupt Request Enable 4" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " EVENT_IRQ_SELECT[3] ,Event Interrupt Request Enable 3" "Disabled,Enabled" bitfld.long 0x00 2. " EVENT_IRQ_SELECT[2] ,Event Interrupt Request Enable 2" "Disabled,Enabled" bitfld.long 0x00 1. " EVENT_IRQ_SELECT[1] ,Event Interrupt Request Enable 1" "Disabled,Enabled" bitfld.long 0x00 0. " EVENT_IRQ_SELECT[0] ,Event Interrupt Request Enable 0" "Disabled,Enabled" group.long 0x24++0x07 line.long 0x00 "INT_EVENT_RIS,Event interrupt raw status register" bitfld.long 0x00 31. " DMASEV_ACTIVE[31] ,Status of the event-interrupt 31" "Inactive,Active" bitfld.long 0x00 30. " DMASEV_ACTIVE[30] ,Status of the event-interrupt 30" "Inactive,Active" bitfld.long 0x00 29. " DMASEV_ACTIVE[29] ,Status of the event-interrupt 29" "Inactive,Active" bitfld.long 0x00 28. " DMASEV_ACTIVE[28] ,Status of the event-interrupt 28" "Inactive,Active" textline " " bitfld.long 0x00 27. " DMASEV_ACTIVE[27] ,Status of the event-interrupt 27" "Inactive,Active" bitfld.long 0x00 26. " DMASEV_ACTIVE[26] ,Status of the event-interrupt 26" "Inactive,Active" bitfld.long 0x00 25. " DMASEV_ACTIVE[25] ,Status of the event-interrupt 25" "Inactive,Active" bitfld.long 0x00 24. " DMASEV_ACTIVE[24] ,Status of the event-interrupt 24" "Inactive,Active" textline " " bitfld.long 0x00 23. " DMASEV_ACTIVE[23] ,Status of the event-interrupt 23" "Inactive,Active" bitfld.long 0x00 22. " DMASEV_ACTIVE[22] ,Status of the event-interrupt 22" "Inactive,Active" bitfld.long 0x00 21. " DMASEV_ACTIVE[21] ,Status of the event-interrupt 21" "Inactive,Active" bitfld.long 0x00 20. " DMASEV_ACTIVE[20] ,Status of the event-interrupt 20" "Inactive,Active" textline " " bitfld.long 0x00 19. " DMASEV_ACTIVE[19] ,Status of the event-interrupt 19" "Inactive,Active" bitfld.long 0x00 18. " DMASEV_ACTIVE[18] ,Status of the event-interrupt 18" "Inactive,Active" bitfld.long 0x00 17. " DMASEV_ACTIVE[17] ,Status of the event-interrupt 17" "Inactive,Active" bitfld.long 0x00 16. " DMASEV_ACTIVE[16] ,Status of the event-interrupt 16" "Inactive,Active" textline " " bitfld.long 0x00 15. " DMASEV_ACTIVE[15] ,Status of the event-interrupt 15" "Inactive,Active" bitfld.long 0x00 14. " DMASEV_ACTIVE[14] ,Status of the event-interrupt 14" "Inactive,Active" bitfld.long 0x00 13. " DMASEV_ACTIVE[13] ,Status of the event-interrupt 13" "Inactive,Active" bitfld.long 0x00 12. " DMASEV_ACTIVE[12] ,Status of the event-interrupt 12" "Inactive,Active" textline " " bitfld.long 0x00 11. " DMASEV_ACTIVE[11] ,Status of the event-interrupt 11" "Inactive,Active" bitfld.long 0x00 10. " DMASEV_ACTIVE[10] ,Status of the event-interrupt 10" "Inactive,Active" bitfld.long 0x00 9. " DMASEV_ACTIVE[9] ,Status of the event-interrupt 9" "Inactive,Active" bitfld.long 0x00 8. " DMASEV_ACTIVE[8] ,Status of the event-interrupt 8" "Inactive,Active" textline " " bitfld.long 0x00 7. " DMASEV_ACTIVE[7] ,Status of the event-interrupt 7" "Inactive,Active" bitfld.long 0x00 6. " DMASEV_ACTIVE[6] ,Status of the event-interrupt 6" "Inactive,Active" bitfld.long 0x00 5. " DMASEV_ACTIVE[5] ,Status of the event-interrupt 5" "Inactive,Active" bitfld.long 0x00 4. " DMASEV_ACTIVE[4] ,Status of the event-interrupt 4" "Inactive,Active" textline " " bitfld.long 0x00 3. " DMASEV_ACTIVE[3] ,Status of the event-interrupt 3" "Inactive,Active" bitfld.long 0x00 2. " DMASEV_ACTIVE[2] ,Status of the event-interrupt 2" "Inactive,Active" bitfld.long 0x00 1. " DMASEV_ACTIVE[1] ,Status of the event-interrupt 1" "Inactive,Active" bitfld.long 0x00 0. " DMASEV_ACTIVE[0] ,Status of the event-interrupt 0" "Inactive,Active" line.long 0x04 "INTMIS,Interrupt status register" bitfld.long 0x04 31. " IRQ_STATUS[31] ,Status of the interrupt 31" "Inactive,Active" bitfld.long 0x04 30. " IRQ_STATUS[30] ,Status of the interrupt 30" "Inactive,Active" bitfld.long 0x04 29. " IRQ_STATUS[29] ,Status of the interrupt 29" "Inactive,Active" bitfld.long 0x04 28. " IRQ_STATUS[28] ,Status of the interrupt 28" "Inactive,Active" textline " " bitfld.long 0x04 27. " IRQ_STATUS[27] ,Status of the interrupt 27" "Inactive,Active" bitfld.long 0x04 26. " IRQ_STATUS[26] ,Status of the interrupt 26" "Inactive,Active" bitfld.long 0x04 25. " IRQ_STATUS[25] ,Status of the interrupt 25" "Inactive,Active" bitfld.long 0x04 24. " IRQ_STATUS[24] ,Status of the interrupt 24" "Inactive,Active" textline " " bitfld.long 0x04 23. " IRQ_STATUS[23] ,Status of the interrupt 23" "Inactive,Active" bitfld.long 0x04 22. " IRQ_STATUS[22] ,Status of the interrupt 22" "Inactive,Active" bitfld.long 0x04 21. " IRQ_STATUS[21] ,Status of the interrupt 21" "Inactive,Active" bitfld.long 0x04 20. " IRQ_STATUS[20] ,Status of the interrupt 20" "Inactive,Active" textline " " bitfld.long 0x04 19. " IRQ_STATUS[19] ,Status of the interrupt 19" "Inactive,Active" bitfld.long 0x04 18. " IRQ_STATUS[18] ,Status of the interrupt 18" "Inactive,Active" bitfld.long 0x04 17. " IRQ_STATUS[17] ,Status of the interrupt 17" "Inactive,Active" bitfld.long 0x04 16. " IRQ_STATUS[16] ,Status of the interrupt 16" "Inactive,Active" textline " " bitfld.long 0x04 15. " IRQ_STATUS[15] ,Status of the interrupt 15" "Inactive,Active" bitfld.long 0x04 14. " IRQ_STATUS[14] ,Status of the interrupt 14" "Inactive,Active" bitfld.long 0x04 13. " IRQ_STATUS[13] ,Status of the interrupt 13" "Inactive,Active" bitfld.long 0x04 12. " IRQ_STATUS[12] ,Status of the interrupt 12" "Inactive,Active" textline " " bitfld.long 0x04 11. " IRQ_STATUS[11] ,Status of the interrupt 11" "Inactive,Active" bitfld.long 0x04 10. " IRQ_STATUS[10] ,Status of the interrupt 10" "Inactive,Active" bitfld.long 0x04 9. " IRQ_STATUS[9] ,Status of the interrupt 9" "Inactive,Active" bitfld.long 0x04 8. " IRQ_STATUS[8] ,Status of the interrupt 8" "Inactive,Active" textline " " bitfld.long 0x04 7. " IRQ_STATUS[7] ,Status of the interrupt 7" "Inactive,Active" bitfld.long 0x04 6. " IRQ_STATUS[6] ,Status of the interrupt 6" "Inactive,Active" bitfld.long 0x04 5. " IRQ_STATUS[5] ,Status of the interrupt 5" "Inactive,Active" bitfld.long 0x04 4. " IRQ_STATUS[4] ,Status of the interrupt 4" "Inactive,Active" textline " " bitfld.long 0x04 3. " IRQ_STATUS[3] ,Status of the interrupt 3" "Inactive,Active" bitfld.long 0x04 2. " IRQ_STATUS[2] ,Status of the interrupt 2" "Inactive,Active" bitfld.long 0x04 1. " IRQ_STATUS[1] ,Status of the interrupt 1" "Inactive,Active" bitfld.long 0x04 0. " IRQ_STATUS[0] ,Status of the interrupt 0" "Inactive,Active" group.long 0x2C++0x03 line.long 0x00 "INTCLR,Interrupt clear register" bitfld.long 0x00 31. " IRQ_CLR[31] ,Interrupt 31 clear" "No effect,Cleared" bitfld.long 0x00 30. " IRQ_CLR[30] ,Interrupt 30 clear" "No effect,Cleared" bitfld.long 0x00 29. " IRQ_CLR[29] ,Interrupt 29 clear" "No effect,Cleared" bitfld.long 0x00 28. " IRQ_CLR[28] ,Interrupt 28 clear" "No effect,Cleared" textline " " bitfld.long 0x00 27. " IRQ_CLR[27] ,Interrupt 27 clear" "No effect,Cleared" bitfld.long 0x00 26. " IRQ_CLR[26] ,Interrupt 26 clear" "No effect,Cleared" bitfld.long 0x00 25. " IRQ_CLR[25] ,Interrupt 25 clear" "No effect,Cleared" bitfld.long 0x00 24. " IRQ_CLR[24] ,Interrupt 24 clear" "No effect,Cleared" textline " " bitfld.long 0x00 23. " IRQ_CLR[23] ,Interrupt 23 clear" "No effect,Cleared" bitfld.long 0x00 22. " IRQ_CLR[22] ,Interrupt 22 clear" "No effect,Cleared" bitfld.long 0x00 21. " IRQ_CLR[21] ,Interrupt 21 clear" "No effect,Cleared" bitfld.long 0x00 20. " IRQ_CLR[20] ,Interrupt 20 clear" "No effect,Cleared" textline " " bitfld.long 0x00 19. " IRQ_CLR[19] ,Interrupt 19 clear" "No effect,Cleared" bitfld.long 0x00 18. " IRQ_CLR[18] ,Interrupt 18 clear" "No effect,Cleared" bitfld.long 0x00 17. " IRQ_CLR[17] ,Interrupt 17 clear" "No effect,Cleared" bitfld.long 0x00 16. " IRQ_CLR[16] ,Interrupt 16 clear" "No effect,Cleared" textline " " bitfld.long 0x00 15. " IRQ_CLR[15] ,Interrupt 15 clear" "No effect,Cleared" bitfld.long 0x00 14. " IRQ_CLR[14] ,Interrupt 14 clear" "No effect,Cleared" bitfld.long 0x00 13. " IRQ_CLR[13] ,Interrupt 13 clear" "No effect,Cleared" bitfld.long 0x00 12. " IRQ_CLR[12] ,Interrupt 12 clear" "No effect,Cleared" textline " " bitfld.long 0x00 11. " IRQ_CLR[11] ,Interrupt 11 clear" "No effect,Cleared" bitfld.long 0x00 10. " IRQ_CLR[10] ,Interrupt 10 clear" "No effect,Cleared" bitfld.long 0x00 9. " IRQ_CLR[9] ,Interrupt 9 clear" "No effect,Cleared" bitfld.long 0x00 8. " IRQ_CLR[8] ,Interrupt 8 clear" "No effect,Cleared" textline " " bitfld.long 0x00 7. " IRQ_CLR[7] ,Interrupt 7 clear" "No effect,Cleared" bitfld.long 0x00 6. " IRQ_CLR[6] ,Interrupt 6 clear" "No effect,Cleared" bitfld.long 0x00 5. " IRQ_CLR[5] ,Interrupt 5 clear" "No effect,Cleared" bitfld.long 0x00 4. " IRQ_CLR[4] ,Interrupt 4 clear" "No effect,Cleared" textline " " bitfld.long 0x00 3. " IRQ_CLR[3] ,Interrupt 3 clear" "No effect,Cleared" bitfld.long 0x00 2. " IRQ_CLR[2] ,Interrupt 2 clear" "No effect,Cleared" bitfld.long 0x00 1. " IRQ_CLR[1] ,Interrupt 1 clear" "No effect,Cleared" bitfld.long 0x00 0. " IRQ_CLR[0] ,Interrupt 0 clear" "No effect,Cleared" group.long 0x30++0x0B line.long 0x00 "FSRD,Fault status DMA manager register" bitfld.long 0x00 0. " FS_MGR ,Provides the fault status of the DMA manager" "Disabled,Enabled" line.long 0x04 "FSRC,Fault status DMA channel register" bitfld.long 0x04 7. " FAULT_STATUS ,Fault status of the channel 7" "Not present,Present" bitfld.long 0x04 6. " FAULT_STATUS ,Fault status of the channel 6" "Not present,Present" bitfld.long 0x04 5. " FAULT_STATUS ,Fault status of the channel 5" "Not present,Present" bitfld.long 0x04 4. " FAULT_STATUS ,Fault status of the channel 4" "Not present,Present" textline " " bitfld.long 0x04 3. " FAULT_STATUS ,Fault status of the channel 3" "Not present,Present" bitfld.long 0x04 2. " FAULT_STATUS ,Fault status of the channel 2" "Not present,Present" bitfld.long 0x04 1. " FAULT_STATUS ,Fault status of the channel 1" "Not present,Present" bitfld.long 0x04 0. " FAULT_STATUS ,Fault status of the channel 0" "Not present,Present" line.long 0x08 "FTRD,Fault type DMA manager register" bitfld.long 0x08 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x08 16. " INSTR_FETCH_ERR ,Indicates the AXI response that the DMAC receives on the RRESP bus after the DMA manager" "No error,Error" bitfld.long 0x08 5. " MGR_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x08 4. " DMAGO_ERR ,Execute DMAGO with inappropriate security permissions" "No error,Error" textline " " bitfld.long 0x08 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x08 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" tree "DMA Channel 0" group.long 0x40++0x03 line.long 0x00 "FTR0,Default type for DMA channel 0" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x100++0x07 line.long 0x00 "CSR0,Channel status for DMA channel 0" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC0,Channel PC for DMA channel 0" group.long 0x400++0x13 line.long 0x00 "SAR0,Source address for DMA channel 0" line.long 0x04 "DAR0,Destination address for DMA channel 0" line.long 0x08 "CCR0,Channel control for DMA channel 0" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_0,Loop counter 0 for DMA channel 0" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_0,Loop counter 1 for DMA channel 0" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 1" group.long 0x44++0x03 line.long 0x00 "FTR1,Default type for DMA channel 1" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x108++0x07 line.long 0x00 "CSR1,Channel status for DMA channel 1" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC1,Channel PC for DMA channel 1" group.long 0x420++0x13 line.long 0x00 "SAR1,Source address for DMA channel 1" line.long 0x04 "DAR1,Destination address for DMA channel 1" line.long 0x08 "CCR1,Channel control for DMA channel 1" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_1,Loop counter 0 for DMA channel 1" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_1,Loop counter 1 for DMA channel 1" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 2" group.long 0x48++0x03 line.long 0x00 "FTR2,Default type for DMA channel 2" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x110++0x07 line.long 0x00 "CSR2,Channel status for DMA channel 2" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC2,Channel PC for DMA channel 2" group.long 0x440++0x13 line.long 0x00 "SAR2,Source address for DMA channel 2" line.long 0x04 "DAR2,Destination address for DMA channel 2" line.long 0x08 "CCR2,Channel control for DMA channel 2" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_2,Loop counter 0 for DMA channel 2" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_2,Loop counter 1 for DMA channel 2" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 3" group.long 0x4C++0x03 line.long 0x00 "FTR3,Default type for DMA channel 3" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x118++0x07 line.long 0x00 "CSR3,Channel status for DMA channel 3" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC3,Channel PC for DMA channel 3" group.long 0x460++0x13 line.long 0x00 "SAR3,Source address for DMA channel 3" line.long 0x04 "DAR3,Destination address for DMA channel 3" line.long 0x08 "CCR3,Channel control for DMA channel 3" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_3,Loop counter 0 for DMA channel 3" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_3,Loop counter 1 for DMA channel 3" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 4" group.long 0x50++0x03 line.long 0x00 "FTR4,Default type for DMA channel 4" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x120++0x07 line.long 0x00 "CSR4,Channel status for DMA channel 4" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC4,Channel PC for DMA channel 4" group.long 0x480++0x13 line.long 0x00 "SAR4,Source address for DMA channel 4" line.long 0x04 "DAR4,Destination address for DMA channel 4" line.long 0x08 "CCR4,Channel control for DMA channel 4" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_4,Loop counter 0 for DMA channel 4" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_4,Loop counter 1 for DMA channel 4" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 5" group.long 0x54++0x03 line.long 0x00 "FTR5,Default type for DMA channel 5" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x128++0x07 line.long 0x00 "CSR5,Channel status for DMA channel 5" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC5,Channel PC for DMA channel 5" group.long 0x4A0++0x13 line.long 0x00 "SAR5,Source address for DMA channel 5" line.long 0x04 "DAR5,Destination address for DMA channel 5" line.long 0x08 "CCR5,Channel control for DMA channel 5" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_5,Loop counter 0 for DMA channel 5" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_5,Loop counter 1 for DMA channel 5" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 6" group.long 0x58++0x03 line.long 0x00 "FTR6,Default type for DMA channel 6" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x130++0x07 line.long 0x00 "CSR6,Channel status for DMA channel 6" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC6,Channel PC for DMA channel 6" group.long 0x4C0++0x13 line.long 0x00 "SAR6,Source address for DMA channel 6" line.long 0x04 "DAR6,Destination address for DMA channel 6" line.long 0x08 "CCR6,Channel control for DMA channel 6" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_6,Loop counter 0 for DMA channel 6" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_6,Loop counter 1 for DMA channel 6" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 7" group.long 0x5C++0x03 line.long 0x00 "FTR7,Default type for DMA channel 7" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x138++0x07 line.long 0x00 "CSR7,Channel status for DMA channel 7" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC7,Channel PC for DMA channel 7" group.long 0x4E0++0x13 line.long 0x00 "SAR7,Source address for DMA channel 7" line.long 0x04 "DAR7,Destination address for DMA channel 7" line.long 0x08 "CCR7,Channel control for DMA channel 7" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_7,Loop counter 0 for DMA channel 7" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_7,Loop counter 1 for DMA channel 7" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end group.long 0xD00++0x0F line.long 0x00 "DBGSTATUS,Debug status register" bitfld.long 0x00 0. " DBGSTATUS ,Debug status" "Idle,Busy" line.long 0x04 "DBGCMD,Debug command register" bitfld.long 0x04 0.--1. " DBGCMD ,Debug command" "Executed,?..." line.long 0x08 "DBGINST0,Debug instruction 0 register" hexmask.long.byte 0x08 24.--31. 1. " INSTRUCTION_BYTE1 ,Instruction byte 1" hexmask.long.byte 0x08 16.--23. 1. " INSTRUCTION_BYTE0 ,Instruction byte 0" bitfld.long 0x08 8.--10. " CHANNEL_NUM ,DMA channel number" "0,1,2,3,4,5,6,7" bitfld.long 0x08 0. " DEBUG_THREAD ,Debug thread" "Manager,Channel" line.long 0x0C "DBGINST1,Debug instruction 1 register" hexmask.long.byte 0x0C 24.--31. 1. " INSTRUCTION_BYTE5 ,Instruction byte 5" hexmask.long.byte 0x0C 16.--23. 1. " INSTRUCTION_BYTE4 ,Instruction byte 4" hexmask.long.byte 0x0C 8.--15. 1. " INSTRUCTION_BYTE3 ,Instruction byte 3" hexmask.long.byte 0x0C 0.--7. 1. " INSTRUCTION_BYTE2 ,Instruction byte 2" if (((d.l(ad:0xFFE00000+0xE00))&0x1)==0x1) group.long 0xE00++0x03 line.long 0x00 "CR0,Configuration Register 0" bitfld.long 0x00 17.--21. " NUM_EVENTS ,Number of interrupt outputs that the DMAC provides" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32" bitfld.long 0x00 12.--16. " NUM_PERIPH_REQ ,Number of peripheral request interfaces that the DMAC provides" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32" bitfld.long 0x00 4.--6. " NUM_CHNLS ,Number of DMA channels that the DMAC supports" "1,2,3,4,5,6,7,8" bitfld.long 0x00 2. " MGR_NS_AT_RST ,Status of the boot_manager_ns signal when the DMAC exited from reset" "Low,High" textline " " bitfld.long 0x00 1. " BOOT_EN ,Status of the boot_from_pc signal when the DMAC exited from reset" "Low,High" bitfld.long 0x00 0. " PERIPH_REQ ,Supports peripheral requests" "Not provided,Provided" else group.long 0xE00++0x03 line.long 0x00 "CR0,Configuration Register 0" bitfld.long 0x00 17.--21. " NUM_EVENTS ,Number of interrupt outputs that the DMAC provides" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32" bitfld.long 0x00 4.--6. " NUM_CHNLS ,Number of DMA channels that the DMAC supports" "1,2,3,4,5,6,7,8" bitfld.long 0x00 2. " MGR_NS_AT_RST ,Status of the boot_manager_ns signal when the DMAC exited from reset" "Low,High" textline " " bitfld.long 0x00 1. " BOOT_EN ,Status of the boot_from_pc signal when the DMAC exited from reset" "Low,High" bitfld.long 0x00 0. " PERIPH_REQ ,Supports peripheral requests" "Not provided,Provided" endif group.long 0xE04++0x13 line.long 0x00 "CR1,Configuration Register 1" bitfld.long 0x00 4.--7. " NUM_ICACHE_LINES ,Number of i-cache lines" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x00 0.--2. " ICACHE_LEN ,I-cache line length" "Reserved,Reserved,4 bytes,8 bytes,16 bytes,32 bytes,?..." line.long 0x04 "CR2,Configuration Register 2" line.long 0x08 "CR3,Configuration Register 3" bitfld.long 0x08 31. " INS[31] ,Security state of an event-interrupt resource 31" "Secure,Non-secure" bitfld.long 0x08 30. " INS[30] ,Security state of an event-interrupt resource 30" "Secure,Non-secure" bitfld.long 0x08 29. " INS[29] ,Security state of an event-interrupt resource 29" "Secure,Non-secure" bitfld.long 0x08 28. " INS[28] ,Security state of an event-interrupt resource 28" "Secure,Non-secure" textline " " bitfld.long 0x08 27. " INS[27] ,Security state of an event-interrupt resource 27" "Secure,Non-secure" bitfld.long 0x08 26. " INS[26] ,Security state of an event-interrupt resource 26" "Secure,Non-secure" bitfld.long 0x08 25. " INS[25] ,Security state of an event-interrupt resource 25" "Secure,Non-secure" bitfld.long 0x08 24. " INS[24] ,Security state of an event-interrupt resource 24" "Secure,Non-secure" textline " " bitfld.long 0x08 23. " INS[23] ,Security state of an event-interrupt resource 23" "Secure,Non-secure" bitfld.long 0x08 22. " INS[22] ,Security state of an event-interrupt resource 22" "Secure,Non-secure" bitfld.long 0x08 21. " INS[21] ,Security state of an event-interrupt resource 21" "Secure,Non-secure" bitfld.long 0x08 20. " INS[20] ,Security state of an event-interrupt resource 20" "Secure,Non-secure" textline " " bitfld.long 0x08 19. " INS[19] ,Security state of an event-interrupt resource 19" "Secure,Non-secure" bitfld.long 0x08 18. " INS[18] ,Security state of an event-interrupt resource 18" "Secure,Non-secure" bitfld.long 0x08 17. " INS[17] ,Security state of an event-interrupt resource 17" "Secure,Non-secure" bitfld.long 0x08 16. " INS[16] ,Security state of an event-interrupt resource 16" "Secure,Non-secure" textline " " bitfld.long 0x08 15. " INS[15] ,Security state of an event-interrupt resource 15" "Secure,Non-secure" bitfld.long 0x08 14. " INS[14] ,Security state of an event-interrupt resource 14" "Secure,Non-secure" bitfld.long 0x08 13. " INS[13] ,Security state of an event-interrupt resource 13" "Secure,Non-secure" bitfld.long 0x08 12. " INS[12] ,Security state of an event-interrupt resource 12" "Secure,Non-secure" textline " " bitfld.long 0x08 11. " INS[11] ,Security state of an event-interrupt resource 11" "Secure,Non-secure" bitfld.long 0x08 10. " INS[10] ,Security state of an event-interrupt resource 10" "Secure,Non-secure" bitfld.long 0x08 9. " INS[9] ,Security state of an event-interrupt resource 9" "Secure,Non-secure" bitfld.long 0x08 8. " INS[8] ,Security state of an event-interrupt resource 8" "Secure,Non-secure" textline " " bitfld.long 0x08 7. " INS[7] ,Security state of an event-interrupt resource 7" "Secure,Non-secure" bitfld.long 0x08 6. " INS[6] ,Security state of an event-interrupt resource 6" "Secure,Non-secure" bitfld.long 0x08 5. " INS[5] ,Security state of an event-interrupt resource 5" "Secure,Non-secure" bitfld.long 0x08 4. " INS[4] ,Security state of an event-interrupt resource 4" "Secure,Non-secure" textline " " bitfld.long 0x08 3. " INS[3] ,Security state of an event-interrupt resource 3" "Secure,Non-secure" bitfld.long 0x08 2. " INS[2] ,Security state of an event-interrupt resource 2" "Secure,Non-secure" bitfld.long 0x08 1. " INS[1] ,Security state of an event-interrupt resource 1" "Secure,Non-secure" bitfld.long 0x08 0. " INS[0] ,Security state of an event-interrupt resource 0" "Secure,Non-secure" line.long 0x0C "CR4,Configuration Register 4" bitfld.long 0x0C 31. " PNS[31] ,Security state of the peripheral request interface 31" "Secure,Non-secure" bitfld.long 0x0C 30. " PNS[30] ,Security state of the peripheral request interface 30" "Secure,Non-secure" bitfld.long 0x0C 29. " PNS[29] ,Security state of the peripheral request interface 29" "Secure,Non-secure" bitfld.long 0x0C 28. " PNS[28] ,Security state of the peripheral request interface 28" "Secure,Non-secure" textline " " bitfld.long 0x0C 27. " PNS[27] ,Security state of the peripheral request interface 27" "Secure,Non-secure" bitfld.long 0x0C 26. " PNS[26] ,Security state of the peripheral request interface 26" "Secure,Non-secure" bitfld.long 0x0C 25. " PNS[25] ,Security state of the peripheral request interface 25" "Secure,Non-secure" bitfld.long 0x0C 24. " PNS[24] ,Security state of the peripheral request interface 24" "Secure,Non-secure" textline " " bitfld.long 0x0C 23. " PNS[23] ,Security state of the peripheral request interface 23" "Secure,Non-secure" bitfld.long 0x0C 22. " PNS[22] ,Security state of the peripheral request interface 22" "Secure,Non-secure" bitfld.long 0x0C 21. " PNS[21] ,Security state of the peripheral request interface 21" "Secure,Non-secure" bitfld.long 0x0C 20. " PNS[20] ,Security state of the peripheral request interface 20" "Secure,Non-secure" textline " " bitfld.long 0x0C 19. " PNS[19] ,Security state of the peripheral request interface 19" "Secure,Non-secure" bitfld.long 0x0C 18. " PNS[18] ,Security state of the peripheral request interface 18" "Secure,Non-secure" bitfld.long 0x0C 17. " PNS[17] ,Security state of the peripheral request interface 17" "Secure,Non-secure" bitfld.long 0x0C 16. " PNS[16] ,Security state of the peripheral request interface 16" "Secure,Non-secure" textline " " bitfld.long 0x0C 15. " PNS[15] ,Security state of the peripheral request interface 15" "Secure,Non-secure" bitfld.long 0x0C 14. " PNS[14] ,Security state of the peripheral request interface 14" "Secure,Non-secure" bitfld.long 0x0C 13. " PNS[13] ,Security state of the peripheral request interface 13" "Secure,Non-secure" bitfld.long 0x0C 12. " PNS[12] ,Security state of the peripheral request interface 12" "Secure,Non-secure" textline " " bitfld.long 0x0C 11. " PNS[11] ,Security state of the peripheral request interface 11" "Secure,Non-secure" bitfld.long 0x0C 10. " PNS[10] ,Security state of the peripheral request interface 10" "Secure,Non-secure" bitfld.long 0x0C 9. " PNS[9] ,Security state of the peripheral request interface 9" "Secure,Non-secure" bitfld.long 0x0C 8. " PNS[8] ,Security state of the peripheral request interface 8" "Secure,Non-secure" textline " " bitfld.long 0x0C 7. " PNS[7] ,Security state of the peripheral request interface 7" "Secure,Non-secure" bitfld.long 0x0C 6. " PNS[6] ,Security state of the peripheral request interface 6" "Secure,Non-secure" bitfld.long 0x0C 5. " PNS[5] ,Security state of the peripheral request interface 5" "Secure,Non-secure" bitfld.long 0x0C 4. " PNS[4] ,Security state of the peripheral request interface 4" "Secure,Non-secure" textline " " bitfld.long 0x0C 3. " PNS[3] ,Security state of the peripheral request interface 3" "Secure,Non-secure" bitfld.long 0x0C 2. " PNS[2] ,Security state of the peripheral request interface 2" "Secure,Non-secure" bitfld.long 0x0C 1. " PNS[1] ,Security state of the peripheral request interface 1" "Secure,Non-secure" bitfld.long 0x0C 0. " PNS[0] ,Security state of the peripheral request interface 0" "Secure,Non-secure" line.long 0x10 "CRD,DMA configuration register" hexmask.long.word 0x10 20.--29. 1. " DATA_BUFFER_DEP ,Number of lines that the data buffer contains" bitfld.long 0x10 16.--19. " RD_Q_DEP ,Depth of the read queue" "1 line,2 lines,3 lines,4 lines,5 lines,6 lines,7 lines,8 lines,9 lines,10 lines,11 lines,12 lines,13 lines,14 lines,15 lines,16 lines" bitfld.long 0x10 12.--14. " RD_CAP ,Number of outstanding read transactions" "1,2,3,4,5,6,7,8" bitfld.long 0x10 8.--11. " WR_Q_DEP ,Depth of the write queue" "1 line,2 lines,3 lines,4 lines,5 lines,6 lines,7 lines,8 lines,9 lines,10 lines,11 lines,12 lines,13 lines,14 lines,15 lines,16 lines" textline " " bitfld.long 0x10 4.--6. " WR_CAP ,Number of outstanding write transactions" "1,2,3,4,5,6,7,8" bitfld.long 0x10 0.--2. " DATA_WIDTH ,Data bus width of the AXI master interface" "Reserved,Reserved,32-bit,64-bit,128-bit,?..." group.long 0xE80++0x03 line.long 0x00 "WD,Watch dog register" bitfld.long 0x00 0. " WD_IRQ_ONLY ,Controls how the DMAC responds when it detects a lock-up condition" "Aborted and set,Set" group.long 0xFE0++0x1F line.long 0x00 "PERIPH_ID_0,Peripheral identification register 0" hexmask.long.byte 0x00 0.--7. 1. " PART_NUMBER_0 ,Part number 0" line.long 0x04 "PERIPH_ID_1,Peripheral identification register 1" bitfld.long 0x04 4.--7. " DESIGNER_0 ,Designer 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 0.--3. " PART_NUMBER_1 ,Part number 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "PERIPH_ID_2,Peripheral identification register 2" bitfld.long 0x08 4.--7. " REVISION ,Revision nuber" "r0p0,r1p0,r1p1,?..." bitfld.long 0x08 0.--3. " DESIGNER_1 ,Designer 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x0C "PERIPH_ID_3,Peripheral identification register 3" bitfld.long 0x0C 0. " INTEGRATION_CFG ,Integration test logic(ITL) configuration" "No ITL,ITL" line.long 0x10 "PCELL_ID_0,Component identification register 0" hexmask.long.byte 0x10 0.--7. 1. " PCELL_ID_0 ,Component identification 0" line.long 0x14 "PCELL_ID_1,Component identification register 1" hexmask.long.byte 0x14 0.--7. 1. " PCELL_ID_1 ,Component identification 1" line.long 0x18 "PCELL_ID_2,Component identification register 2" hexmask.long.byte 0x18 0.--7. 1. " PCELL_ID_2 ,Component identification 2" line.long 0x1C "PCELL_ID_3,Component identification register 3" hexmask.long.byte 0x1C 0.--7. 1. " PCELL_ID_3 ,Component identification 3" width 12. tree.end tree "DMASECURE (Secure DMA Module Address Space)" base ad:0xFFE01000 width 23. group.long 0x00++0x07 line.long 0x00 "DSR,DMA manager status register" bitfld.long 0x00 9. " DNS ,Provides the security status of the DMA manager thread" "Secure,Non-secure" bitfld.long 0x00 4.--8. " WAKEUP_EVENT ,Wakeup event" "Event[0],Event[1],Event[2],Event[3],Event[4],Event[5],Event[6],Event[7],Event[8],Event[9],Event[10],Event[11],Event[12],Event[13],Event[14],Event[15],Event[16],Event[17],Event[18],Event[19],Event[20],Event[21],Event[22],Event[23],Event[24],Event[25],Event[26],Event[27],Event[28],Event[29],Event[30],Event[31]" bitfld.long 0x00 0.--3. " DMA_STATUS ,The operating state of the DMA manager" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Faulting" line.long 0x04 "DPC,DMA Program Counter Register" group.long 0x20++0x03 line.long 0x00 "INTEN,Interrupt enable register" bitfld.long 0x00 31. " EVENT_IRQ_SELECT[31] ,Event Interrupt Request Enable 31" "Disabled,Enabled" bitfld.long 0x00 30. " EVENT_IRQ_SELECT[30] ,Event Interrupt Request Enable 30" "Disabled,Enabled" bitfld.long 0x00 29. " EVENT_IRQ_SELECT[29] ,Event Interrupt Request Enable 29" "Disabled,Enabled" bitfld.long 0x00 28. " EVENT_IRQ_SELECT[28] ,Event Interrupt Request Enable 28" "Disabled,Enabled" textline " " bitfld.long 0x00 27. " EVENT_IRQ_SELECT[27] ,Event Interrupt Request Enable 27" "Disabled,Enabled" bitfld.long 0x00 26. " EVENT_IRQ_SELECT[26] ,Event Interrupt Request Enable 26" "Disabled,Enabled" bitfld.long 0x00 25. " EVENT_IRQ_SELECT[25] ,Event Interrupt Request Enable 25" "Disabled,Enabled" bitfld.long 0x00 24. " EVENT_IRQ_SELECT[24] ,Event Interrupt Request Enable 24" "Disabled,Enabled" textline " " bitfld.long 0x00 23. " EVENT_IRQ_SELECT[23] ,Event Interrupt Request Enable 23" "Disabled,Enabled" bitfld.long 0x00 22. " EVENT_IRQ_SELECT[22] ,Event Interrupt Request Enable 22" "Disabled,Enabled" bitfld.long 0x00 21. " EVENT_IRQ_SELECT[21] ,Event Interrupt Request Enable 21" "Disabled,Enabled" bitfld.long 0x00 20. " EVENT_IRQ_SELECT[20] ,Event Interrupt Request Enable 20" "Disabled,Enabled" textline " " bitfld.long 0x00 19. " EVENT_IRQ_SELECT[19] ,Event Interrupt Request Enable 19" "Disabled,Enabled" bitfld.long 0x00 18. " EVENT_IRQ_SELECT[18] ,Event Interrupt Request Enable 18" "Disabled,Enabled" bitfld.long 0x00 17. " EVENT_IRQ_SELECT[17] ,Event Interrupt Request Enable 17" "Disabled,Enabled" bitfld.long 0x00 16. " EVENT_IRQ_SELECT[16] ,Event Interrupt Request Enable 16" "Disabled,Enabled" textline " " bitfld.long 0x00 15. " EVENT_IRQ_SELECT[15] ,Event Interrupt Request Enable 15" "Disabled,Enabled" bitfld.long 0x00 14. " EVENT_IRQ_SELECT[14] ,Event Interrupt Request Enable 14" "Disabled,Enabled" bitfld.long 0x00 13. " EVENT_IRQ_SELECT[13] ,Event Interrupt Request Enable 13" "Disabled,Enabled" bitfld.long 0x00 12. " EVENT_IRQ_SELECT[12] ,Event Interrupt Request Enable 12" "Disabled,Enabled" textline " " bitfld.long 0x00 11. " EVENT_IRQ_SELECT[11] ,Event Interrupt Request Enable 11" "Disabled,Enabled" bitfld.long 0x00 10. " EVENT_IRQ_SELECT[10] ,Event Interrupt Request Enable 10" "Disabled,Enabled" bitfld.long 0x00 9. " EVENT_IRQ_SELECT[9] ,Event Interrupt Request Enable 9" "Disabled,Enabled" bitfld.long 0x00 8. " EVENT_IRQ_SELECT[8] ,Event Interrupt Request Enable 8" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " EVENT_IRQ_SELECT[7] ,Event Interrupt Request Enable 7" "Disabled,Enabled" bitfld.long 0x00 6. " EVENT_IRQ_SELECT[6] ,Event Interrupt Request Enable 6" "Disabled,Enabled" bitfld.long 0x00 5. " EVENT_IRQ_SELECT[5] ,Event Interrupt Request Enable 5" "Disabled,Enabled" bitfld.long 0x00 4. " EVENT_IRQ_SELECT[4] ,Event Interrupt Request Enable 4" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " EVENT_IRQ_SELECT[3] ,Event Interrupt Request Enable 3" "Disabled,Enabled" bitfld.long 0x00 2. " EVENT_IRQ_SELECT[2] ,Event Interrupt Request Enable 2" "Disabled,Enabled" bitfld.long 0x00 1. " EVENT_IRQ_SELECT[1] ,Event Interrupt Request Enable 1" "Disabled,Enabled" bitfld.long 0x00 0. " EVENT_IRQ_SELECT[0] ,Event Interrupt Request Enable 0" "Disabled,Enabled" group.long 0x24++0x07 line.long 0x00 "INT_EVENT_RIS,Event interrupt raw status register" bitfld.long 0x00 31. " DMASEV_ACTIVE[31] ,Status of the event-interrupt 31" "Inactive,Active" bitfld.long 0x00 30. " DMASEV_ACTIVE[30] ,Status of the event-interrupt 30" "Inactive,Active" bitfld.long 0x00 29. " DMASEV_ACTIVE[29] ,Status of the event-interrupt 29" "Inactive,Active" bitfld.long 0x00 28. " DMASEV_ACTIVE[28] ,Status of the event-interrupt 28" "Inactive,Active" textline " " bitfld.long 0x00 27. " DMASEV_ACTIVE[27] ,Status of the event-interrupt 27" "Inactive,Active" bitfld.long 0x00 26. " DMASEV_ACTIVE[26] ,Status of the event-interrupt 26" "Inactive,Active" bitfld.long 0x00 25. " DMASEV_ACTIVE[25] ,Status of the event-interrupt 25" "Inactive,Active" bitfld.long 0x00 24. " DMASEV_ACTIVE[24] ,Status of the event-interrupt 24" "Inactive,Active" textline " " bitfld.long 0x00 23. " DMASEV_ACTIVE[23] ,Status of the event-interrupt 23" "Inactive,Active" bitfld.long 0x00 22. " DMASEV_ACTIVE[22] ,Status of the event-interrupt 22" "Inactive,Active" bitfld.long 0x00 21. " DMASEV_ACTIVE[21] ,Status of the event-interrupt 21" "Inactive,Active" bitfld.long 0x00 20. " DMASEV_ACTIVE[20] ,Status of the event-interrupt 20" "Inactive,Active" textline " " bitfld.long 0x00 19. " DMASEV_ACTIVE[19] ,Status of the event-interrupt 19" "Inactive,Active" bitfld.long 0x00 18. " DMASEV_ACTIVE[18] ,Status of the event-interrupt 18" "Inactive,Active" bitfld.long 0x00 17. " DMASEV_ACTIVE[17] ,Status of the event-interrupt 17" "Inactive,Active" bitfld.long 0x00 16. " DMASEV_ACTIVE[16] ,Status of the event-interrupt 16" "Inactive,Active" textline " " bitfld.long 0x00 15. " DMASEV_ACTIVE[15] ,Status of the event-interrupt 15" "Inactive,Active" bitfld.long 0x00 14. " DMASEV_ACTIVE[14] ,Status of the event-interrupt 14" "Inactive,Active" bitfld.long 0x00 13. " DMASEV_ACTIVE[13] ,Status of the event-interrupt 13" "Inactive,Active" bitfld.long 0x00 12. " DMASEV_ACTIVE[12] ,Status of the event-interrupt 12" "Inactive,Active" textline " " bitfld.long 0x00 11. " DMASEV_ACTIVE[11] ,Status of the event-interrupt 11" "Inactive,Active" bitfld.long 0x00 10. " DMASEV_ACTIVE[10] ,Status of the event-interrupt 10" "Inactive,Active" bitfld.long 0x00 9. " DMASEV_ACTIVE[9] ,Status of the event-interrupt 9" "Inactive,Active" bitfld.long 0x00 8. " DMASEV_ACTIVE[8] ,Status of the event-interrupt 8" "Inactive,Active" textline " " bitfld.long 0x00 7. " DMASEV_ACTIVE[7] ,Status of the event-interrupt 7" "Inactive,Active" bitfld.long 0x00 6. " DMASEV_ACTIVE[6] ,Status of the event-interrupt 6" "Inactive,Active" bitfld.long 0x00 5. " DMASEV_ACTIVE[5] ,Status of the event-interrupt 5" "Inactive,Active" bitfld.long 0x00 4. " DMASEV_ACTIVE[4] ,Status of the event-interrupt 4" "Inactive,Active" textline " " bitfld.long 0x00 3. " DMASEV_ACTIVE[3] ,Status of the event-interrupt 3" "Inactive,Active" bitfld.long 0x00 2. " DMASEV_ACTIVE[2] ,Status of the event-interrupt 2" "Inactive,Active" bitfld.long 0x00 1. " DMASEV_ACTIVE[1] ,Status of the event-interrupt 1" "Inactive,Active" bitfld.long 0x00 0. " DMASEV_ACTIVE[0] ,Status of the event-interrupt 0" "Inactive,Active" line.long 0x04 "INTMIS,Interrupt status register" bitfld.long 0x04 31. " IRQ_STATUS[31] ,Status of the interrupt 31" "Inactive,Active" bitfld.long 0x04 30. " IRQ_STATUS[30] ,Status of the interrupt 30" "Inactive,Active" bitfld.long 0x04 29. " IRQ_STATUS[29] ,Status of the interrupt 29" "Inactive,Active" bitfld.long 0x04 28. " IRQ_STATUS[28] ,Status of the interrupt 28" "Inactive,Active" textline " " bitfld.long 0x04 27. " IRQ_STATUS[27] ,Status of the interrupt 27" "Inactive,Active" bitfld.long 0x04 26. " IRQ_STATUS[26] ,Status of the interrupt 26" "Inactive,Active" bitfld.long 0x04 25. " IRQ_STATUS[25] ,Status of the interrupt 25" "Inactive,Active" bitfld.long 0x04 24. " IRQ_STATUS[24] ,Status of the interrupt 24" "Inactive,Active" textline " " bitfld.long 0x04 23. " IRQ_STATUS[23] ,Status of the interrupt 23" "Inactive,Active" bitfld.long 0x04 22. " IRQ_STATUS[22] ,Status of the interrupt 22" "Inactive,Active" bitfld.long 0x04 21. " IRQ_STATUS[21] ,Status of the interrupt 21" "Inactive,Active" bitfld.long 0x04 20. " IRQ_STATUS[20] ,Status of the interrupt 20" "Inactive,Active" textline " " bitfld.long 0x04 19. " IRQ_STATUS[19] ,Status of the interrupt 19" "Inactive,Active" bitfld.long 0x04 18. " IRQ_STATUS[18] ,Status of the interrupt 18" "Inactive,Active" bitfld.long 0x04 17. " IRQ_STATUS[17] ,Status of the interrupt 17" "Inactive,Active" bitfld.long 0x04 16. " IRQ_STATUS[16] ,Status of the interrupt 16" "Inactive,Active" textline " " bitfld.long 0x04 15. " IRQ_STATUS[15] ,Status of the interrupt 15" "Inactive,Active" bitfld.long 0x04 14. " IRQ_STATUS[14] ,Status of the interrupt 14" "Inactive,Active" bitfld.long 0x04 13. " IRQ_STATUS[13] ,Status of the interrupt 13" "Inactive,Active" bitfld.long 0x04 12. " IRQ_STATUS[12] ,Status of the interrupt 12" "Inactive,Active" textline " " bitfld.long 0x04 11. " IRQ_STATUS[11] ,Status of the interrupt 11" "Inactive,Active" bitfld.long 0x04 10. " IRQ_STATUS[10] ,Status of the interrupt 10" "Inactive,Active" bitfld.long 0x04 9. " IRQ_STATUS[9] ,Status of the interrupt 9" "Inactive,Active" bitfld.long 0x04 8. " IRQ_STATUS[8] ,Status of the interrupt 8" "Inactive,Active" textline " " bitfld.long 0x04 7. " IRQ_STATUS[7] ,Status of the interrupt 7" "Inactive,Active" bitfld.long 0x04 6. " IRQ_STATUS[6] ,Status of the interrupt 6" "Inactive,Active" bitfld.long 0x04 5. " IRQ_STATUS[5] ,Status of the interrupt 5" "Inactive,Active" bitfld.long 0x04 4. " IRQ_STATUS[4] ,Status of the interrupt 4" "Inactive,Active" textline " " bitfld.long 0x04 3. " IRQ_STATUS[3] ,Status of the interrupt 3" "Inactive,Active" bitfld.long 0x04 2. " IRQ_STATUS[2] ,Status of the interrupt 2" "Inactive,Active" bitfld.long 0x04 1. " IRQ_STATUS[1] ,Status of the interrupt 1" "Inactive,Active" bitfld.long 0x04 0. " IRQ_STATUS[0] ,Status of the interrupt 0" "Inactive,Active" group.long 0x2C++0x03 line.long 0x00 "INTCLR,Interrupt clear register" bitfld.long 0x00 31. " IRQ_CLR[31] ,Interrupt 31 clear" "No effect,Cleared" bitfld.long 0x00 30. " IRQ_CLR[30] ,Interrupt 30 clear" "No effect,Cleared" bitfld.long 0x00 29. " IRQ_CLR[29] ,Interrupt 29 clear" "No effect,Cleared" bitfld.long 0x00 28. " IRQ_CLR[28] ,Interrupt 28 clear" "No effect,Cleared" textline " " bitfld.long 0x00 27. " IRQ_CLR[27] ,Interrupt 27 clear" "No effect,Cleared" bitfld.long 0x00 26. " IRQ_CLR[26] ,Interrupt 26 clear" "No effect,Cleared" bitfld.long 0x00 25. " IRQ_CLR[25] ,Interrupt 25 clear" "No effect,Cleared" bitfld.long 0x00 24. " IRQ_CLR[24] ,Interrupt 24 clear" "No effect,Cleared" textline " " bitfld.long 0x00 23. " IRQ_CLR[23] ,Interrupt 23 clear" "No effect,Cleared" bitfld.long 0x00 22. " IRQ_CLR[22] ,Interrupt 22 clear" "No effect,Cleared" bitfld.long 0x00 21. " IRQ_CLR[21] ,Interrupt 21 clear" "No effect,Cleared" bitfld.long 0x00 20. " IRQ_CLR[20] ,Interrupt 20 clear" "No effect,Cleared" textline " " bitfld.long 0x00 19. " IRQ_CLR[19] ,Interrupt 19 clear" "No effect,Cleared" bitfld.long 0x00 18. " IRQ_CLR[18] ,Interrupt 18 clear" "No effect,Cleared" bitfld.long 0x00 17. " IRQ_CLR[17] ,Interrupt 17 clear" "No effect,Cleared" bitfld.long 0x00 16. " IRQ_CLR[16] ,Interrupt 16 clear" "No effect,Cleared" textline " " bitfld.long 0x00 15. " IRQ_CLR[15] ,Interrupt 15 clear" "No effect,Cleared" bitfld.long 0x00 14. " IRQ_CLR[14] ,Interrupt 14 clear" "No effect,Cleared" bitfld.long 0x00 13. " IRQ_CLR[13] ,Interrupt 13 clear" "No effect,Cleared" bitfld.long 0x00 12. " IRQ_CLR[12] ,Interrupt 12 clear" "No effect,Cleared" textline " " bitfld.long 0x00 11. " IRQ_CLR[11] ,Interrupt 11 clear" "No effect,Cleared" bitfld.long 0x00 10. " IRQ_CLR[10] ,Interrupt 10 clear" "No effect,Cleared" bitfld.long 0x00 9. " IRQ_CLR[9] ,Interrupt 9 clear" "No effect,Cleared" bitfld.long 0x00 8. " IRQ_CLR[8] ,Interrupt 8 clear" "No effect,Cleared" textline " " bitfld.long 0x00 7. " IRQ_CLR[7] ,Interrupt 7 clear" "No effect,Cleared" bitfld.long 0x00 6. " IRQ_CLR[6] ,Interrupt 6 clear" "No effect,Cleared" bitfld.long 0x00 5. " IRQ_CLR[5] ,Interrupt 5 clear" "No effect,Cleared" bitfld.long 0x00 4. " IRQ_CLR[4] ,Interrupt 4 clear" "No effect,Cleared" textline " " bitfld.long 0x00 3. " IRQ_CLR[3] ,Interrupt 3 clear" "No effect,Cleared" bitfld.long 0x00 2. " IRQ_CLR[2] ,Interrupt 2 clear" "No effect,Cleared" bitfld.long 0x00 1. " IRQ_CLR[1] ,Interrupt 1 clear" "No effect,Cleared" bitfld.long 0x00 0. " IRQ_CLR[0] ,Interrupt 0 clear" "No effect,Cleared" group.long 0x30++0x0B line.long 0x00 "FSRD,Fault status DMA manager register" bitfld.long 0x00 0. " FS_MGR ,Provides the fault status of the DMA manager" "Disabled,Enabled" line.long 0x04 "FSRC,Fault status DMA channel register" bitfld.long 0x04 7. " FAULT_STATUS ,Fault status of the channel 7" "Not present,Present" bitfld.long 0x04 6. " FAULT_STATUS ,Fault status of the channel 6" "Not present,Present" bitfld.long 0x04 5. " FAULT_STATUS ,Fault status of the channel 5" "Not present,Present" bitfld.long 0x04 4. " FAULT_STATUS ,Fault status of the channel 4" "Not present,Present" textline " " bitfld.long 0x04 3. " FAULT_STATUS ,Fault status of the channel 3" "Not present,Present" bitfld.long 0x04 2. " FAULT_STATUS ,Fault status of the channel 2" "Not present,Present" bitfld.long 0x04 1. " FAULT_STATUS ,Fault status of the channel 1" "Not present,Present" bitfld.long 0x04 0. " FAULT_STATUS ,Fault status of the channel 0" "Not present,Present" line.long 0x08 "FTRD,Fault type DMA manager register" bitfld.long 0x08 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x08 16. " INSTR_FETCH_ERR ,Indicates the AXI response that the DMAC receives on the RRESP bus after the DMA manager" "No error,Error" bitfld.long 0x08 5. " MGR_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x08 4. " DMAGO_ERR ,Execute DMAGO with inappropriate security permissions" "No error,Error" textline " " bitfld.long 0x08 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x08 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" tree "DMA Channel 0" group.long 0x40++0x03 line.long 0x00 "FTR0,Default type for DMA channel 0" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x100++0x07 line.long 0x00 "CSR0,Channel status for DMA channel 0" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC0,Channel PC for DMA channel 0" group.long 0x400++0x13 line.long 0x00 "SAR0,Source address for DMA channel 0" line.long 0x04 "DAR0,Destination address for DMA channel 0" line.long 0x08 "CCR0,Channel control for DMA channel 0" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_0,Loop counter 0 for DMA channel 0" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_0,Loop counter 1 for DMA channel 0" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 1" group.long 0x44++0x03 line.long 0x00 "FTR1,Default type for DMA channel 1" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x108++0x07 line.long 0x00 "CSR1,Channel status for DMA channel 1" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC1,Channel PC for DMA channel 1" group.long 0x420++0x13 line.long 0x00 "SAR1,Source address for DMA channel 1" line.long 0x04 "DAR1,Destination address for DMA channel 1" line.long 0x08 "CCR1,Channel control for DMA channel 1" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_1,Loop counter 0 for DMA channel 1" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_1,Loop counter 1 for DMA channel 1" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 2" group.long 0x48++0x03 line.long 0x00 "FTR2,Default type for DMA channel 2" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x110++0x07 line.long 0x00 "CSR2,Channel status for DMA channel 2" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC2,Channel PC for DMA channel 2" group.long 0x440++0x13 line.long 0x00 "SAR2,Source address for DMA channel 2" line.long 0x04 "DAR2,Destination address for DMA channel 2" line.long 0x08 "CCR2,Channel control for DMA channel 2" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_2,Loop counter 0 for DMA channel 2" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_2,Loop counter 1 for DMA channel 2" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 3" group.long 0x4C++0x03 line.long 0x00 "FTR3,Default type for DMA channel 3" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x118++0x07 line.long 0x00 "CSR3,Channel status for DMA channel 3" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC3,Channel PC for DMA channel 3" group.long 0x460++0x13 line.long 0x00 "SAR3,Source address for DMA channel 3" line.long 0x04 "DAR3,Destination address for DMA channel 3" line.long 0x08 "CCR3,Channel control for DMA channel 3" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_3,Loop counter 0 for DMA channel 3" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_3,Loop counter 1 for DMA channel 3" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 4" group.long 0x50++0x03 line.long 0x00 "FTR4,Default type for DMA channel 4" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x120++0x07 line.long 0x00 "CSR4,Channel status for DMA channel 4" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC4,Channel PC for DMA channel 4" group.long 0x480++0x13 line.long 0x00 "SAR4,Source address for DMA channel 4" line.long 0x04 "DAR4,Destination address for DMA channel 4" line.long 0x08 "CCR4,Channel control for DMA channel 4" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_4,Loop counter 0 for DMA channel 4" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_4,Loop counter 1 for DMA channel 4" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 5" group.long 0x54++0x03 line.long 0x00 "FTR5,Default type for DMA channel 5" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x128++0x07 line.long 0x00 "CSR5,Channel status for DMA channel 5" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC5,Channel PC for DMA channel 5" group.long 0x4A0++0x13 line.long 0x00 "SAR5,Source address for DMA channel 5" line.long 0x04 "DAR5,Destination address for DMA channel 5" line.long 0x08 "CCR5,Channel control for DMA channel 5" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_5,Loop counter 0 for DMA channel 5" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_5,Loop counter 1 for DMA channel 5" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 6" group.long 0x58++0x03 line.long 0x00 "FTR6,Default type for DMA channel 6" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x130++0x07 line.long 0x00 "CSR6,Channel status for DMA channel 6" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC6,Channel PC for DMA channel 6" group.long 0x4C0++0x13 line.long 0x00 "SAR6,Source address for DMA channel 6" line.long 0x04 "DAR6,Destination address for DMA channel 6" line.long 0x08 "CCR6,Channel control for DMA channel 6" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_6,Loop counter 0 for DMA channel 6" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_6,Loop counter 1 for DMA channel 6" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end tree "DMA Channel 7" group.long 0x5C++0x03 line.long 0x00 "FTR7,Default type for DMA channel 7" bitfld.long 0x00 31. " LOCKUP_ERR ,Indicates whether the DMA channel has locked-up because of resource starvation" "No error,Error" bitfld.long 0x00 30. " DBG_INSTR ,Erroneous instruction was read from the system memory or from the debug interface" "System,Debug" bitfld.long 0x00 18. " DATA_READ_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel thread performs a data read" "No error,Error" bitfld.long 0x00 17. " DATA_WRITE_ERR ,AXI response that the DMAC receives on the BRESP bus, after the DMA channel" "No error,Error" textline " " bitfld.long 0x00 16. " INSTR_FETCH_ERR ,AXI response that the DMAC receives on the RRESP bus, after the DMA channel" "No error,Error" bitfld.long 0x00 13. " ST_DATA_UNAVAILABLE ,Indicates whether the MFIFO did not contain the data to enable the DMAC to perform the DMAST" "Available,Unavailable" bitfld.long 0x00 12. " MFIFO_ERR ,MFIFO prevented the DMA channel thread from executing DMALD or DMAST" "No error,Error" bitfld.long 0x00 7. " CH_RDWR_ERR ,Program the CCRn Register to perform a secure read or secure write" "No error,Error" textline " " bitfld.long 0x00 6. " CH_PERIPH_ERR ,Execute DMAWFP, DMALDP, DMASTP, or DMAFLUSHP with inappropriate security permissions" "No error,Error" bitfld.long 0x00 5. " CH_EVNT_ERR ,Execute DMAWFE or DMASEV with inappropriate security permissions" "No error,Error" bitfld.long 0x00 1. " OPERAND_INVALID ,Execute an instruction operand that was not valid" "Valid,Invalid" bitfld.long 0x00 0. " UNDEF_INSTR ,Execute an undefined instruction" "Defined,Undefined" group.long 0x138++0x07 line.long 0x00 "CSR7,Channel status for DMA channel 7" bitfld.long 0x00 21. " CNS ,Security of the DMA channel" "Secure,Non-secure" bitfld.long 0x00 15. " DMAWFP_PERIPH ,Indicates whether the periph operand was set" "Not set,Set" bitfld.long 0x00 14. " DMAWFP_B_NS ,Indicates whether the burst or single operand were set" "Single,Burst" bitfld.long 0x00 4.--8. " WAKEUP_NUM ,DMA channel waiting for event or peripheral" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" textline " " bitfld.long 0x00 0.--3. " CHANNEL_STATUS ,Channel status encoding" "Stopped,Executing,Cache miss,Updating PC,Waiting for event,At barrier,Reserved,Waiting for peripheral,Killing,Completing,Reserved,Reserved,Reserved,Reserved,Faulting completing,Faulting" line.long 0x04 "CPC7,Channel PC for DMA channel 7" group.long 0x4E0++0x13 line.long 0x00 "SAR7,Source address for DMA channel 7" line.long 0x04 "DAR7,Destination address for DMA channel 7" line.long 0x08 "CCR7,Channel control for DMA channel 7" bitfld.long 0x08 28.--30. " ENDIAN_SWAP_SIZE ,Endian swap size" "No swap 8-bit,Swapped 16-bit,Swapped 32-bit,Swapped 64-bit,Swapped 128-bit,?..." bitfld.long 0x08 27. " DST_CACHE_CTRL[3] ,State of AWCACHE[3]" "Low,High" bitfld.long 0x08 26. " DST_CACHE_CTRL[1] ,State of AWCACHE[1]" "Low,High" bitfld.long 0x08 25. " DST_CACHE_CTRL[0] ,State of AWCACHE[0]" "Low,High" textline " " bitfld.long 0x08 24. " DST_PROT_CTRL[2] ,State of AWPROT[2]" "Low,High" bitfld.long 0x08 23. " DST_PROT_CTRL[1] ,State of AWPROT[1]" "Low,High" bitfld.long 0x08 22. " DST_PROT_CTRL[0] ,State of AWPROT[0]" "Low,High" bitfld.long 0x08 18.--21. " DST_BURST_LEN ,Destination burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x08 15.--17. " DST_BURST_SIZE ,Destination burst size" "1,2,4,8,16,?..." bitfld.long 0x08 14. " DST_INC ,Destination burst type" "Fixed-address,Incrementing-address" bitfld.long 0x08 13. " SRC_CACHE_CTRL[1] ,State of ARCACHE[2]" "Low,High" bitfld.long 0x08 12. " SRC_CACHE_CTRL[1] ,State of ARCACHE[1]" "Low,High" textline " " bitfld.long 0x08 11. " SRC_CACHE_CTRL[0] ,State of ARCACHE[0]" "Low,High" bitfld.long 0x08 10. " SRC_PROT_CTRL[2] ,State of ARPROT[2]" "Low,High" bitfld.long 0x08 9. " SRC_PROT_CTRL[1] ,State of ARPROT[1]" "Low,High" bitfld.long 0x08 8. " SRC_PROT_CTRL[0] ,State of ARPROT[0]" "Low,High" textline " " bitfld.long 0x08 4.--7. " SRC_BURST_LEN ,Source burst lenght" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x08 1.--3. " SRC_BURST_SIZE ,Source burst size" "1,2,4,8,16,?..." bitfld.long 0x08 0. " SRC_INC ,Source burst type" "Fixed-address,Incrementing-address" line.long 0x0C "LC0_7,Loop counter 0 for DMA channel 7" hexmask.long.byte 0x0C 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" line.long 0x10 "LC1_7,Loop counter 1 for DMA channel 7" hexmask.long.byte 0x10 0.--7. 1. " LOOP_COUNTER_ITERATION ,Provides the status of loop counter zero for the DMA channel" tree.end group.long 0xD00++0x0F line.long 0x00 "DBGSTATUS,Debug status register" bitfld.long 0x00 0. " DBGSTATUS ,Debug status" "Idle,Busy" line.long 0x04 "DBGCMD,Debug command register" bitfld.long 0x04 0.--1. " DBGCMD ,Debug command" "Executed,?..." line.long 0x08 "DBGINST0,Debug instruction 0 register" hexmask.long.byte 0x08 24.--31. 1. " INSTRUCTION_BYTE1 ,Instruction byte 1" hexmask.long.byte 0x08 16.--23. 1. " INSTRUCTION_BYTE0 ,Instruction byte 0" bitfld.long 0x08 8.--10. " CHANNEL_NUM ,DMA channel number" "0,1,2,3,4,5,6,7" bitfld.long 0x08 0. " DEBUG_THREAD ,Debug thread" "Manager,Channel" line.long 0x0C "DBGINST1,Debug instruction 1 register" hexmask.long.byte 0x0C 24.--31. 1. " INSTRUCTION_BYTE5 ,Instruction byte 5" hexmask.long.byte 0x0C 16.--23. 1. " INSTRUCTION_BYTE4 ,Instruction byte 4" hexmask.long.byte 0x0C 8.--15. 1. " INSTRUCTION_BYTE3 ,Instruction byte 3" hexmask.long.byte 0x0C 0.--7. 1. " INSTRUCTION_BYTE2 ,Instruction byte 2" if (((d.l(ad:0xFFE01000+0xE00))&0x1)==0x1) group.long 0xE00++0x03 line.long 0x00 "CR0,Configuration Register 0" bitfld.long 0x00 17.--21. " NUM_EVENTS ,Number of interrupt outputs that the DMAC provides" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32" bitfld.long 0x00 12.--16. " NUM_PERIPH_REQ ,Number of peripheral request interfaces that the DMAC provides" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32" bitfld.long 0x00 4.--6. " NUM_CHNLS ,Number of DMA channels that the DMAC supports" "1,2,3,4,5,6,7,8" bitfld.long 0x00 2. " MGR_NS_AT_RST ,Status of the boot_manager_ns signal when the DMAC exited from reset" "Low,High" textline " " bitfld.long 0x00 1. " BOOT_EN ,Status of the boot_from_pc signal when the DMAC exited from reset" "Low,High" bitfld.long 0x00 0. " PERIPH_REQ ,Supports peripheral requests" "Not provided,Provided" else group.long 0xE00++0x03 line.long 0x00 "CR0,Configuration Register 0" bitfld.long 0x00 17.--21. " NUM_EVENTS ,Number of interrupt outputs that the DMAC provides" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32" bitfld.long 0x00 4.--6. " NUM_CHNLS ,Number of DMA channels that the DMAC supports" "1,2,3,4,5,6,7,8" bitfld.long 0x00 2. " MGR_NS_AT_RST ,Status of the boot_manager_ns signal when the DMAC exited from reset" "Low,High" textline " " bitfld.long 0x00 1. " BOOT_EN ,Status of the boot_from_pc signal when the DMAC exited from reset" "Low,High" bitfld.long 0x00 0. " PERIPH_REQ ,Supports peripheral requests" "Not provided,Provided" endif group.long 0xE04++0x13 line.long 0x00 "CR1,Configuration Register 1" bitfld.long 0x00 4.--7. " NUM_ICACHE_LINES ,Number of i-cache lines" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x00 0.--2. " ICACHE_LEN ,I-cache line length" "Reserved,Reserved,4 bytes,8 bytes,16 bytes,32 bytes,?..." line.long 0x04 "CR2,Configuration Register 2" line.long 0x08 "CR3,Configuration Register 3" bitfld.long 0x08 31. " INS[31] ,Security state of an event-interrupt resource 31" "Secure,Non-secure" bitfld.long 0x08 30. " INS[30] ,Security state of an event-interrupt resource 30" "Secure,Non-secure" bitfld.long 0x08 29. " INS[29] ,Security state of an event-interrupt resource 29" "Secure,Non-secure" bitfld.long 0x08 28. " INS[28] ,Security state of an event-interrupt resource 28" "Secure,Non-secure" textline " " bitfld.long 0x08 27. " INS[27] ,Security state of an event-interrupt resource 27" "Secure,Non-secure" bitfld.long 0x08 26. " INS[26] ,Security state of an event-interrupt resource 26" "Secure,Non-secure" bitfld.long 0x08 25. " INS[25] ,Security state of an event-interrupt resource 25" "Secure,Non-secure" bitfld.long 0x08 24. " INS[24] ,Security state of an event-interrupt resource 24" "Secure,Non-secure" textline " " bitfld.long 0x08 23. " INS[23] ,Security state of an event-interrupt resource 23" "Secure,Non-secure" bitfld.long 0x08 22. " INS[22] ,Security state of an event-interrupt resource 22" "Secure,Non-secure" bitfld.long 0x08 21. " INS[21] ,Security state of an event-interrupt resource 21" "Secure,Non-secure" bitfld.long 0x08 20. " INS[20] ,Security state of an event-interrupt resource 20" "Secure,Non-secure" textline " " bitfld.long 0x08 19. " INS[19] ,Security state of an event-interrupt resource 19" "Secure,Non-secure" bitfld.long 0x08 18. " INS[18] ,Security state of an event-interrupt resource 18" "Secure,Non-secure" bitfld.long 0x08 17. " INS[17] ,Security state of an event-interrupt resource 17" "Secure,Non-secure" bitfld.long 0x08 16. " INS[16] ,Security state of an event-interrupt resource 16" "Secure,Non-secure" textline " " bitfld.long 0x08 15. " INS[15] ,Security state of an event-interrupt resource 15" "Secure,Non-secure" bitfld.long 0x08 14. " INS[14] ,Security state of an event-interrupt resource 14" "Secure,Non-secure" bitfld.long 0x08 13. " INS[13] ,Security state of an event-interrupt resource 13" "Secure,Non-secure" bitfld.long 0x08 12. " INS[12] ,Security state of an event-interrupt resource 12" "Secure,Non-secure" textline " " bitfld.long 0x08 11. " INS[11] ,Security state of an event-interrupt resource 11" "Secure,Non-secure" bitfld.long 0x08 10. " INS[10] ,Security state of an event-interrupt resource 10" "Secure,Non-secure" bitfld.long 0x08 9. " INS[9] ,Security state of an event-interrupt resource 9" "Secure,Non-secure" bitfld.long 0x08 8. " INS[8] ,Security state of an event-interrupt resource 8" "Secure,Non-secure" textline " " bitfld.long 0x08 7. " INS[7] ,Security state of an event-interrupt resource 7" "Secure,Non-secure" bitfld.long 0x08 6. " INS[6] ,Security state of an event-interrupt resource 6" "Secure,Non-secure" bitfld.long 0x08 5. " INS[5] ,Security state of an event-interrupt resource 5" "Secure,Non-secure" bitfld.long 0x08 4. " INS[4] ,Security state of an event-interrupt resource 4" "Secure,Non-secure" textline " " bitfld.long 0x08 3. " INS[3] ,Security state of an event-interrupt resource 3" "Secure,Non-secure" bitfld.long 0x08 2. " INS[2] ,Security state of an event-interrupt resource 2" "Secure,Non-secure" bitfld.long 0x08 1. " INS[1] ,Security state of an event-interrupt resource 1" "Secure,Non-secure" bitfld.long 0x08 0. " INS[0] ,Security state of an event-interrupt resource 0" "Secure,Non-secure" line.long 0x0C "CR4,Configuration Register 4" bitfld.long 0x0C 31. " PNS[31] ,Security state of the peripheral request interface 31" "Secure,Non-secure" bitfld.long 0x0C 30. " PNS[30] ,Security state of the peripheral request interface 30" "Secure,Non-secure" bitfld.long 0x0C 29. " PNS[29] ,Security state of the peripheral request interface 29" "Secure,Non-secure" bitfld.long 0x0C 28. " PNS[28] ,Security state of the peripheral request interface 28" "Secure,Non-secure" textline " " bitfld.long 0x0C 27. " PNS[27] ,Security state of the peripheral request interface 27" "Secure,Non-secure" bitfld.long 0x0C 26. " PNS[26] ,Security state of the peripheral request interface 26" "Secure,Non-secure" bitfld.long 0x0C 25. " PNS[25] ,Security state of the peripheral request interface 25" "Secure,Non-secure" bitfld.long 0x0C 24. " PNS[24] ,Security state of the peripheral request interface 24" "Secure,Non-secure" textline " " bitfld.long 0x0C 23. " PNS[23] ,Security state of the peripheral request interface 23" "Secure,Non-secure" bitfld.long 0x0C 22. " PNS[22] ,Security state of the peripheral request interface 22" "Secure,Non-secure" bitfld.long 0x0C 21. " PNS[21] ,Security state of the peripheral request interface 21" "Secure,Non-secure" bitfld.long 0x0C 20. " PNS[20] ,Security state of the peripheral request interface 20" "Secure,Non-secure" textline " " bitfld.long 0x0C 19. " PNS[19] ,Security state of the peripheral request interface 19" "Secure,Non-secure" bitfld.long 0x0C 18. " PNS[18] ,Security state of the peripheral request interface 18" "Secure,Non-secure" bitfld.long 0x0C 17. " PNS[17] ,Security state of the peripheral request interface 17" "Secure,Non-secure" bitfld.long 0x0C 16. " PNS[16] ,Security state of the peripheral request interface 16" "Secure,Non-secure" textline " " bitfld.long 0x0C 15. " PNS[15] ,Security state of the peripheral request interface 15" "Secure,Non-secure" bitfld.long 0x0C 14. " PNS[14] ,Security state of the peripheral request interface 14" "Secure,Non-secure" bitfld.long 0x0C 13. " PNS[13] ,Security state of the peripheral request interface 13" "Secure,Non-secure" bitfld.long 0x0C 12. " PNS[12] ,Security state of the peripheral request interface 12" "Secure,Non-secure" textline " " bitfld.long 0x0C 11. " PNS[11] ,Security state of the peripheral request interface 11" "Secure,Non-secure" bitfld.long 0x0C 10. " PNS[10] ,Security state of the peripheral request interface 10" "Secure,Non-secure" bitfld.long 0x0C 9. " PNS[9] ,Security state of the peripheral request interface 9" "Secure,Non-secure" bitfld.long 0x0C 8. " PNS[8] ,Security state of the peripheral request interface 8" "Secure,Non-secure" textline " " bitfld.long 0x0C 7. " PNS[7] ,Security state of the peripheral request interface 7" "Secure,Non-secure" bitfld.long 0x0C 6. " PNS[6] ,Security state of the peripheral request interface 6" "Secure,Non-secure" bitfld.long 0x0C 5. " PNS[5] ,Security state of the peripheral request interface 5" "Secure,Non-secure" bitfld.long 0x0C 4. " PNS[4] ,Security state of the peripheral request interface 4" "Secure,Non-secure" textline " " bitfld.long 0x0C 3. " PNS[3] ,Security state of the peripheral request interface 3" "Secure,Non-secure" bitfld.long 0x0C 2. " PNS[2] ,Security state of the peripheral request interface 2" "Secure,Non-secure" bitfld.long 0x0C 1. " PNS[1] ,Security state of the peripheral request interface 1" "Secure,Non-secure" bitfld.long 0x0C 0. " PNS[0] ,Security state of the peripheral request interface 0" "Secure,Non-secure" line.long 0x10 "CRD,DMA configuration register" hexmask.long.word 0x10 20.--29. 1. " DATA_BUFFER_DEP ,Number of lines that the data buffer contains" bitfld.long 0x10 16.--19. " RD_Q_DEP ,Depth of the read queue" "1 line,2 lines,3 lines,4 lines,5 lines,6 lines,7 lines,8 lines,9 lines,10 lines,11 lines,12 lines,13 lines,14 lines,15 lines,16 lines" bitfld.long 0x10 12.--14. " RD_CAP ,Number of outstanding read transactions" "1,2,3,4,5,6,7,8" bitfld.long 0x10 8.--11. " WR_Q_DEP ,Depth of the write queue" "1 line,2 lines,3 lines,4 lines,5 lines,6 lines,7 lines,8 lines,9 lines,10 lines,11 lines,12 lines,13 lines,14 lines,15 lines,16 lines" textline " " bitfld.long 0x10 4.--6. " WR_CAP ,Number of outstanding write transactions" "1,2,3,4,5,6,7,8" bitfld.long 0x10 0.--2. " DATA_WIDTH ,Data bus width of the AXI master interface" "Reserved,Reserved,32-bit,64-bit,128-bit,?..." group.long 0xE80++0x03 line.long 0x00 "WD,Watch dog register" bitfld.long 0x00 0. " WD_IRQ_ONLY ,Controls how the DMAC responds when it detects a lock-up condition" "Aborted and set,Set" group.long 0xFE0++0x1F line.long 0x00 "PERIPH_ID_0,Peripheral identification register 0" hexmask.long.byte 0x00 0.--7. 1. " PART_NUMBER_0 ,Part number 0" line.long 0x04 "PERIPH_ID_1,Peripheral identification register 1" bitfld.long 0x04 4.--7. " DESIGNER_0 ,Designer 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x04 0.--3. " PART_NUMBER_1 ,Part number 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x08 "PERIPH_ID_2,Peripheral identification register 2" bitfld.long 0x08 4.--7. " REVISION ,Revision nuber" "r0p0,r1p0,r1p1,?..." bitfld.long 0x08 0.--3. " DESIGNER_1 ,Designer 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" line.long 0x0C "PERIPH_ID_3,Peripheral identification register 3" bitfld.long 0x0C 0. " INTEGRATION_CFG ,Integration test logic(ITL) configuration" "No ITL,ITL" line.long 0x10 "PCELL_ID_0,Component identification register 0" hexmask.long.byte 0x10 0.--7. 1. " PCELL_ID_0 ,Component identification 0" line.long 0x14 "PCELL_ID_1,Component identification register 1" hexmask.long.byte 0x14 0.--7. 1. " PCELL_ID_1 ,Component identification 1" line.long 0x18 "PCELL_ID_2,Component identification register 2" hexmask.long.byte 0x18 0.--7. 1. " PCELL_ID_2 ,Component identification 2" line.long 0x1C "PCELL_ID_3,Component identification register 3" hexmask.long.byte 0x1C 0.--7. 1. " PCELL_ID_3 ,Component identification 3" width 12. tree.end tree.open "SPIS (SPI Slave Module)" tree "SPIS 0" base ad:0xFFE02000 width 16. if (((d.l(ad:0xFFE02000))&0x30)==0x00)&&((d.l(ad:0xFFE02000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." bitfld.long 0x00 7. " SCPOL ,Serial Clock Polarity" "Low,High" bitfld.long 0x00 6. " SCPH ,Serial Clock Phase" "Middle bit,Start bit" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFE02000))&0x30)==0x00)&&((d.l(ad:0xFFE02000+0x08)&0x01)==0x00) group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." bitfld.long 0x00 7. " SCPOL ,Serial Clock Polarity" "Low,High" bitfld.long 0x00 6. " SCPH ,Serial Clock Phase" "Middle bit,Start bit" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFE02000))&0x30)==0x20)&&((d.l(ad:0xFFE02000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 12.--15. " CFS ,Control Frame Size" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFE02000))&0x30)==0x20)&&((d.l(ad:0xFFE02000+0x08)&0x01)==0x00) group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 12.--15. " CFS ,Control Frame Size" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif ((d.l(ad:0xFFE02000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif else group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif endif group.long 0x08++0x03 line.long 0x00 "SPIENR,Enable Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 0. " SPI_EN ,SSI Enable" "Disabled,Enabled" else bitfld.long 0x00 0. " SPI_EN ,Enable" "Disabled,Enabled" endif if (((d.l(ad:0xFFE02000))&0x30)==0x20)&&((d.l(ad:0xFFE02000+0x08)&0x01)==0x01) rgroup.long 0x0C++0x03 line.long 0x00 "MWCR,Microwire Control Register" bitfld.long 0x00 1. " MDD ,Microwire Control" "Receive,Transmit" bitfld.long 0x00 0. " MWMOD ,Microwire Transfer Mode" "Non-sequential,Sequential" elif (((d.l(ad:0xFFE02000))&0x30)==0x20)&&((d.l(ad:0xFFE02000+0x08)&0x01)==0x00) group.long 0x0C++0x03 line.long 0x00 "MWCR,Microwire Control Register" bitfld.long 0x00 1. " MDD ,Microwire Control" "Receive,Transmit" bitfld.long 0x00 0. " MWMOD ,Microwire Transfer Mode" "Non-sequential,Sequential" else hgroup.long 0x0C++0x03 hide.long 0x00 "MWCR,Microwire Control Register" endif group.long 0x18++0x07 line.long 0x00 "TXFTLR,Transmit FIFO Threshold Level Register" hexmask.long.byte 0x00 0.--7. 1. " TFT ,Transmit FIFO Threshold" line.long 0x04 "RXFTLR,Receive FIFO Threshold Level Register" hexmask.long.byte 0x04 0.--7. 1. " TFT ,Receive FIFO Threshold" rgroup.long 0x20++0x07 line.long 0x00 "TXFLR,Transmit FIFO Level Register" hexmask.long.word 0x00 0.--8. 1. " TXTFL ,Transmit FIFO Level" line.long 0x04 "RXFLR,Receive FIFO Level Register" hexmask.long.word 0x04 0.--8. 1. " TXTFL ,Receive FIFO Level" hgroup.long 0x28++0x03 hide.long 0x08 "SR,Status Register" in group.long 0x2C++0x03 line.long 0x00 "IMR,Interrupt Mask Register" bitfld.long 0x00 4. " RXFIM ,Receive FIFO Full Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 3. " RXOIM ,Receive FIFO Overflow Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 2. " RXUIM ,Receive FIFO Underflow Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 1. " TXOIM ,Transmit FIFO Overflow Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 0. " TXEIM ,Transmit FIFO Empty Interrupt Mask" "Masked,Not masked" rgroup.long 0x30++0x07 line.long 0x00 "ISR,Interrupt Status Register" bitfld.long 0x00 4. " RXFIS ,Receive FIFO Full Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 3. " RXOIS ,Receive FIFO Overflow Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 2. " RXUIS ,Receive FIFO Underflow Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " TXOIS ,Transmit FIFO Overflow Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 0. " TXEIS ,Transmit FIFO Empty Interrupt Status" "No interrupt,Interrupt" line.long 0x04 "RISR,Raw Interrupt Status Register" bitfld.long 0x04 4. " RXFIR ,Receive FIFO Full Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 3. " RXOIR ,Receive FIFO Overflow Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 2. " RXUIR ,Receive FIFO Underflow Raw Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x04 1. " TXOIR ,Transmit FIFO Overflow Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 0. " TXEIR ,Transmit FIFO Empty Raw Interrupt Status" "No interrupt,Interrupt" hgroup.long 0x38++0x03 hide.long 0x08 "TXOICR,Transmit FIFO Overflow Interrupt Clear Register" in hgroup.long 0x3C++0x03 hide.long 0x00 "RXOICR,Receive FIFO Overflow Interrupt Clear Register" in hgroup.long 0x40++0x03 hide.long 0x00 "RXUICR,Receive FIFO Underflow Interrupt Clear Register" in sif cpu()=="ARRIA10SOC" hgroup.long 0x44++0x03 hide.long 0x00 "MSTICR,Multi-Master Interrupt Clear Register" in endif hgroup.long 0x48++0x03 hide.long 0x00 "ICR,Interrupt Clear Register" in group.long 0x4C++0x0B line.long 0x00 "DMACR,DMA Control Register" bitfld.long 0x00 1. " TDMAE ,Transmit DMA Enable" "Disabled,Enabled" bitfld.long 0x00 0. " RDMAE ,Receive DMA Enable" "Disabled,Enabled" line.long 0x04 "DMATDLR,DMA Transmit Data Level Register" hexmask.long.byte 0x04 0.--7. 1. " DMATDL ,Transmit Data Level" line.long 0x08 "DMARDLR,DMA Receive Data Level Register" hexmask.long.byte 0x08 0.--7. 1. " DMARDL ,Receive Data Level" rgroup.long 0x58++0x03 line.long 0x00 "IDR,Identification Code" group.long 0x5C++0x07 line.long 0x00 "SPI_VERSION_ID,Component Version Register" line.long 0x04 "DR,Data Register" hexmask.long.word 0x04 0.--15. 1. " DR ,Data" width 0x0B tree.end tree "SPIS 1" base ad:0xFFE03000 width 16. if (((d.l(ad:0xFFE03000))&0x30)==0x00)&&((d.l(ad:0xFFE03000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." bitfld.long 0x00 7. " SCPOL ,Serial Clock Polarity" "Low,High" bitfld.long 0x00 6. " SCPH ,Serial Clock Phase" "Middle bit,Start bit" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFE03000))&0x30)==0x00)&&((d.l(ad:0xFFE03000+0x08)&0x01)==0x00) group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." bitfld.long 0x00 7. " SCPOL ,Serial Clock Polarity" "Low,High" bitfld.long 0x00 6. " SCPH ,Serial Clock Phase" "Middle bit,Start bit" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFE03000))&0x30)==0x20)&&((d.l(ad:0xFFE03000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 12.--15. " CFS ,Control Frame Size" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFE03000))&0x30)==0x20)&&((d.l(ad:0xFFE03000+0x08)&0x01)==0x00) group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 12.--15. " CFS ,Control Frame Size" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif ((d.l(ad:0xFFE03000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif else group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 10. " SLV_OE ,Slave Output Enable" "Enabled,Disabled" textline " " bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,?..." textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif endif group.long 0x08++0x03 line.long 0x00 "SPIENR,Enable Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 0. " SPI_EN ,SSI Enable" "Disabled,Enabled" else bitfld.long 0x00 0. " SPI_EN ,Enable" "Disabled,Enabled" endif if (((d.l(ad:0xFFE03000))&0x30)==0x20)&&((d.l(ad:0xFFE03000+0x08)&0x01)==0x01) rgroup.long 0x0C++0x03 line.long 0x00 "MWCR,Microwire Control Register" bitfld.long 0x00 1. " MDD ,Microwire Control" "Receive,Transmit" bitfld.long 0x00 0. " MWMOD ,Microwire Transfer Mode" "Non-sequential,Sequential" elif (((d.l(ad:0xFFE03000))&0x30)==0x20)&&((d.l(ad:0xFFE03000+0x08)&0x01)==0x00) group.long 0x0C++0x03 line.long 0x00 "MWCR,Microwire Control Register" bitfld.long 0x00 1. " MDD ,Microwire Control" "Receive,Transmit" bitfld.long 0x00 0. " MWMOD ,Microwire Transfer Mode" "Non-sequential,Sequential" else hgroup.long 0x0C++0x03 hide.long 0x00 "MWCR,Microwire Control Register" endif group.long 0x18++0x07 line.long 0x00 "TXFTLR,Transmit FIFO Threshold Level Register" hexmask.long.byte 0x00 0.--7. 1. " TFT ,Transmit FIFO Threshold" line.long 0x04 "RXFTLR,Receive FIFO Threshold Level Register" hexmask.long.byte 0x04 0.--7. 1. " TFT ,Receive FIFO Threshold" rgroup.long 0x20++0x07 line.long 0x00 "TXFLR,Transmit FIFO Level Register" hexmask.long.word 0x00 0.--8. 1. " TXTFL ,Transmit FIFO Level" line.long 0x04 "RXFLR,Receive FIFO Level Register" hexmask.long.word 0x04 0.--8. 1. " TXTFL ,Receive FIFO Level" hgroup.long 0x28++0x03 hide.long 0x08 "SR,Status Register" in group.long 0x2C++0x03 line.long 0x00 "IMR,Interrupt Mask Register" bitfld.long 0x00 4. " RXFIM ,Receive FIFO Full Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 3. " RXOIM ,Receive FIFO Overflow Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 2. " RXUIM ,Receive FIFO Underflow Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 1. " TXOIM ,Transmit FIFO Overflow Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 0. " TXEIM ,Transmit FIFO Empty Interrupt Mask" "Masked,Not masked" rgroup.long 0x30++0x07 line.long 0x00 "ISR,Interrupt Status Register" bitfld.long 0x00 4. " RXFIS ,Receive FIFO Full Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 3. " RXOIS ,Receive FIFO Overflow Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 2. " RXUIS ,Receive FIFO Underflow Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " TXOIS ,Transmit FIFO Overflow Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 0. " TXEIS ,Transmit FIFO Empty Interrupt Status" "No interrupt,Interrupt" line.long 0x04 "RISR,Raw Interrupt Status Register" bitfld.long 0x04 4. " RXFIR ,Receive FIFO Full Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 3. " RXOIR ,Receive FIFO Overflow Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 2. " RXUIR ,Receive FIFO Underflow Raw Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x04 1. " TXOIR ,Transmit FIFO Overflow Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 0. " TXEIR ,Transmit FIFO Empty Raw Interrupt Status" "No interrupt,Interrupt" hgroup.long 0x38++0x03 hide.long 0x08 "TXOICR,Transmit FIFO Overflow Interrupt Clear Register" in hgroup.long 0x3C++0x03 hide.long 0x00 "RXOICR,Receive FIFO Overflow Interrupt Clear Register" in hgroup.long 0x40++0x03 hide.long 0x00 "RXUICR,Receive FIFO Underflow Interrupt Clear Register" in sif cpu()=="ARRIA10SOC" hgroup.long 0x44++0x03 hide.long 0x00 "MSTICR,Multi-Master Interrupt Clear Register" in endif hgroup.long 0x48++0x03 hide.long 0x00 "ICR,Interrupt Clear Register" in group.long 0x4C++0x0B line.long 0x00 "DMACR,DMA Control Register" bitfld.long 0x00 1. " TDMAE ,Transmit DMA Enable" "Disabled,Enabled" bitfld.long 0x00 0. " RDMAE ,Receive DMA Enable" "Disabled,Enabled" line.long 0x04 "DMATDLR,DMA Transmit Data Level Register" hexmask.long.byte 0x04 0.--7. 1. " DMATDL ,Transmit Data Level" line.long 0x08 "DMARDLR,DMA Receive Data Level Register" hexmask.long.byte 0x08 0.--7. 1. " DMARDL ,Receive Data Level" rgroup.long 0x58++0x03 line.long 0x00 "IDR,Identification Code" group.long 0x5C++0x07 line.long 0x00 "SPI_VERSION_ID,Component Version Register" line.long 0x04 "DR,Data Register" hexmask.long.word 0x04 0.--15. 1. " DR ,Data" width 0x0B tree.end tree.end tree.open "SPI (SPI Master Module)" tree "SPIM 0" base ad:0xFFF00000 width 16. if (((d.l(ad:0xFFF00000))&0x30)==0x00)&&((d.l(ad:0xFFF00000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 7. " SCPOL ,Serial Clock Polarity" "Low,High" bitfld.long 0x00 6. " SCPH ,Serial Clock Phase" "Middle bit,Start bit" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFF00000))&0x30)==0x00)&&((d.l(ad:0xFFF00000+0x08)&0x01)==0x00) group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 7. " SCPOL ,Serial Clock Polarity" "Low,High" bitfld.long 0x00 6. " SCPH ,Serial Clock Phase" "Middle bit,Start bit" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFF00000))&0x30)==0x20)&&((d.l(ad:0xFFF00000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 12.--15. " CFS ,Control Frame Size" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFF00000))&0x30)==0x20)&&((d.l(ad:0xFFF00000+0x08)&0x01)==0x00) group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 12.--15. " CFS ,Control Frame Size" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif ((d.l(ad:0xFFF00000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif else group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif endif if ((d.l(ad:0xFFF00000+0x08)&0x01)==0x01) rgroup.long 0x04++0x03 line.long 0x00 "CTRLR1,Control Register 1" hexmask.long.word 0x00 0.--15. 1. " NDF ,Number of Data Frames" else group.long 0x04++0x03 line.long 0x00 "CTRLR1,Control Register 1" hexmask.long.word 0x00 0.--15. 1. " NDF ,Number of Data Frames" endif group.long 0x08++0x03 line.long 0x00 "SPIENR,Enable Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 0. " SPI_EN ,SSI Enable" "Disabled,Enabled" else bitfld.long 0x00 0. " SPI_EN ,Enable" "Disabled,Enabled" endif if (((d.l(ad:0xFFF00000))&0x30)==0x20)&&((d.l(ad:0xFFF00000+0x08)&0x01)==0x01) rgroup.long 0x0C++0x03 line.long 0x00 "MWCR,Microwire Control Register" bitfld.long 0x00 2. " MHS ,Microwire Handshaking" "Disabled,Enabled" bitfld.long 0x00 1. " MDD ,Microwire Control" "Receive,Transmit" bitfld.long 0x00 0. " MWMOD ,Microwire Transfer Mode" "Non-sequential,Sequential" elif (((d.l(ad:0xFFF00000))&0x30)==0x20)&&((d.l(ad:0xFFF00000+0x08)&0x01)==0x00) group.long 0x0C++0x03 line.long 0x00 "MWCR,Microwire Control Register" bitfld.long 0x00 2. " MHS ,Microwire Handshaking" "Disabled,Enabled" bitfld.long 0x00 1. " MDD ,Microwire Control" "Receive,Transmit" bitfld.long 0x00 0. " MWMOD ,Microwire Transfer Mode" "Non-sequential,Sequential" else hgroup.long 0x0C++0x03 hide.long 0x00 "MWCR,Microwire Control Register" endif if ((d.l(ad:0xFFF00000+0x08)&0x01)==0x01) rgroup.long 0x10++0x07 line.long 0x00 "SER,Slave Enable Register" bitfld.long 0x00 3. " SER3 ,Slave Select Line 3 Enable Flag" "Not selected,Selected" bitfld.long 0x00 2. " SER2 ,Slave Select Line 2 Enable Flag" "Not selected,Selected" bitfld.long 0x00 1. " SER1 ,Slave Select Line 1 Enable Flag" "Not selected,Selected" textline " " bitfld.long 0x00 0. " SER0 ,Slave Select Line 0 Enable Flag" "Not selected,Selected" line.long 0x04 "BAUDR,Baud Rate Select Register" sif cpu()=="ARRIA10SOC" hexmask.long.word 0x04 0.--15. 1. " SCKDV ,SSI Clock Divider" else hexmask.long.word 0x04 0.--15. 1. " SCKDV ,Clock Divider" endif else group.long 0x10++0x07 line.long 0x00 "SER,Slave Enable Register" bitfld.long 0x00 3. " SER3 ,Slave Select Line 3 Enable Flag" "Not selected,Selected" bitfld.long 0x00 2. " SER2 ,Slave Select Line 2 Enable Flag" "Not selected,Selected" bitfld.long 0x00 1. " SER1 ,Slave Select Line 1 Enable Flag" "Not selected,Selected" textline " " bitfld.long 0x00 0. " SER0 ,Slave Select Line 0 Enable Flag" "Not selected,Selected" line.long 0x04 "BAUDR,Baud Rate Select Register" sif cpu()=="ARRIA10SOC" hexmask.long.word 0x04 0.--15. 1. " SCKDV ,SSI Clock Divider" else hexmask.long.word 0x04 0.--15. 1. " SCKDV ,Clock Divider" endif endif group.long 0x18++0x07 line.long 0x00 "TXFTLR,Transmit FIFO Threshold Level Register" hexmask.long.byte 0x00 0.--7. 1. " TFT ,Transmit FIFO Threshold" line.long 0x04 "RXFTLR,Receive FIFO Threshold Level Register" hexmask.long.byte 0x04 0.--7. 1. " TFT ,Receive FIFO Threshold" rgroup.long 0x20++0x07 line.long 0x00 "TXFLR,Transmit FIFO Level Register" hexmask.long.word 0x00 0.--8. 1. " TXTFL ,Transmit FIFO Level" line.long 0x04 "RXFLR,Receive FIFO Level Register" hexmask.long.word 0x04 0.--8. 1. " TXTFL ,Receive FIFO Level" hgroup.long 0x28++0x03 hide.long 0x08 "SR,Status Register" in group.long 0x2C++0x03 line.long 0x00 "IMR,Interrupt Mask Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " MSTIS ,Multi-Master Contention Interrupt Status" "Masked,Not masked" textline " " endif bitfld.long 0x00 4. " RXFIM ,Receive FIFO Full Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 3. " RXOIM ,Receive FIFO Overflow Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 2. " RXUIM ,Receive FIFO Underflow Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 1. " TXOIM ,Transmit FIFO Overflow Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 0. " TXEIM ,Transmit FIFO Empty Interrupt Mask" "Masked,Not masked" rgroup.long 0x30++0x07 line.long 0x00 "ISR,Interrupt Status Register" bitfld.long 0x00 5. " MSTIS ,Multi-Master Contention Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " RXFIS ,Receive FIFO Full Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 3. " RXOIS ,Receive FIFO Overflow Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 2. " RXUIS ,Receive FIFO Underflow Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " TXOIS ,Transmit FIFO Overflow Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 0. " TXEIS ,Transmit FIFO Empty Interrupt Status" "No interrupt,Interrupt" line.long 0x04 "RISR,Raw Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x04 5. " MSTIS ,Multi-Master Contention Interrupt Status" "No interrupt,Interrupt" textline " " endif bitfld.long 0x04 4. " RXFIR ,Receive FIFO Full Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 3. " RXOIR ,Receive FIFO Overflow Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 2. " RXUIR ,Receive FIFO Underflow Raw Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x04 1. " TXOIR ,Transmit FIFO Overflow Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 0. " TXEIR ,Transmit FIFO Empty Raw Interrupt Status" "No interrupt,Interrupt" hgroup.long 0x38++0x03 hide.long 0x00 "TXOICR,Transmit FIFO Overflow Interrupt Clear Register" in hgroup.long 0x3C++0x03 hide.long 0x00 "RXOICR,Receive FIFO Overflow Interrupt Clear Register" in hgroup.long 0x40++0x03 hide.long 0x00 "RXUICR,Receive FIFO Underflow Interrupt Clear Register" in sif cpu()=="ARRIA10SOC" hgroup.long 0x44++0x03 hide.long 0x00 "MSTICR,Multi-Master Interrupt Clear Register" in endif hgroup.long 0x48++0x03 hide.long 0x00 "ICR,Interrupt Clear Register" in rgroup.long 0x4C++0x03 line.long 0x00 "DMACR,DMA Control Register" bitfld.long 0x00 1. " TDMAE ,Transmit DMA Enable" "Disabled,Enabled" bitfld.long 0x00 0. " RDMAE ,Receive DMA Enable" "Disabled,Enabled" group.long 0x50++0x07 line.long 0x00 "DMATDLR,DMA Transmit Data Level Register" hexmask.long.byte 0x00 0.--7. 1. " DMATDL ,Transmit Data Level" line.long 0x04 "DMARDLR,DMA Receive Data Level Register" hexmask.long.byte 0x04 0.--7. 1. " DMARDL ,Receive Data Level" rgroup.long 0x58++0x03 line.long 0x00 "IDR,Identification Code" group.long 0x5C++0x07 line.long 0x00 "SPI_VERSION_ID,Component Version Register" line.long 0x04 "DR,Data Register" hexmask.long.word 0x04 0.--15. 1. " DR ,Data" group.long 0xFC++0x03 line.long 0x00 "RX_SAMPLE_DLY,RX Sample Delay" hexmask.long.byte 0x00 0.--6. 1. " RSD ,Rxd Sample Delay" width 0xB tree.end tree "SPIM 1" base ad:0xFFF01000 width 16. if (((d.l(ad:0xFFF01000))&0x30)==0x00)&&((d.l(ad:0xFFF01000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 7. " SCPOL ,Serial Clock Polarity" "Low,High" bitfld.long 0x00 6. " SCPH ,Serial Clock Phase" "Middle bit,Start bit" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFF01000))&0x30)==0x00)&&((d.l(ad:0xFFF01000+0x08)&0x01)==0x00) group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 7. " SCPOL ,Serial Clock Polarity" "Low,High" bitfld.long 0x00 6. " SCPH ,Serial Clock Phase" "Middle bit,Start bit" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFF01000))&0x30)==0x20)&&((d.l(ad:0xFFF01000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 12.--15. " CFS ,Control Frame Size" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif (((d.l(ad:0xFFF01000))&0x30)==0x20)&&((d.l(ad:0xFFF01000+0x08)&0x01)==0x00) group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 12.--15. " CFS ,Control Frame Size" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif elif ((d.l(ad:0xFFF01000+0x08)&0x01)==0x01) rgroup.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif else group.long 0x00++0x03 line.long 0x00 "CTRLR0,Control Register 0" bitfld.long 0x00 11. " SRL ,Shift Register Loop" "Normal,Test" bitfld.long 0x00 8.--9. " TMOD ,Transfer Mode" "Transmit & Receive,Transmit,Receive,EEPROM Read" textline " " bitfld.long 0x00 4.--5. " FRF ,Frame Format" "Motorola SPI,Texas instruments SSP,National Semi Microwire,?..." sif cpu()=="ARRIA10SOC" textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,11-bit,12-bit,13-bit,14-bit,15-bit,16-bit" else textline " " bitfld.long 0x00 0.--3. " DFS ,Data Frame Size" ",,,4-bit,5-bit,6-bit,7-bit,8-bit,9-bit,10-bit,?..." endif endif if ((d.l(ad:0xFFF01000+0x08)&0x01)==0x01) rgroup.long 0x04++0x03 line.long 0x00 "CTRLR1,Control Register 1" hexmask.long.word 0x00 0.--15. 1. " NDF ,Number of Data Frames" else group.long 0x04++0x03 line.long 0x00 "CTRLR1,Control Register 1" hexmask.long.word 0x00 0.--15. 1. " NDF ,Number of Data Frames" endif group.long 0x08++0x03 line.long 0x00 "SPIENR,Enable Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 0. " SPI_EN ,SSI Enable" "Disabled,Enabled" else bitfld.long 0x00 0. " SPI_EN ,Enable" "Disabled,Enabled" endif if (((d.l(ad:0xFFF01000))&0x30)==0x20)&&((d.l(ad:0xFFF01000+0x08)&0x01)==0x01) rgroup.long 0x0C++0x03 line.long 0x00 "MWCR,Microwire Control Register" bitfld.long 0x00 2. " MHS ,Microwire Handshaking" "Disabled,Enabled" bitfld.long 0x00 1. " MDD ,Microwire Control" "Receive,Transmit" bitfld.long 0x00 0. " MWMOD ,Microwire Transfer Mode" "Non-sequential,Sequential" elif (((d.l(ad:0xFFF01000))&0x30)==0x20)&&((d.l(ad:0xFFF01000+0x08)&0x01)==0x00) group.long 0x0C++0x03 line.long 0x00 "MWCR,Microwire Control Register" bitfld.long 0x00 2. " MHS ,Microwire Handshaking" "Disabled,Enabled" bitfld.long 0x00 1. " MDD ,Microwire Control" "Receive,Transmit" bitfld.long 0x00 0. " MWMOD ,Microwire Transfer Mode" "Non-sequential,Sequential" else hgroup.long 0x0C++0x03 hide.long 0x00 "MWCR,Microwire Control Register" endif if ((d.l(ad:0xFFF01000+0x08)&0x01)==0x01) rgroup.long 0x10++0x07 line.long 0x00 "SER,Slave Enable Register" bitfld.long 0x00 3. " SER3 ,Slave Select Line 3 Enable Flag" "Not selected,Selected" bitfld.long 0x00 2. " SER2 ,Slave Select Line 2 Enable Flag" "Not selected,Selected" bitfld.long 0x00 1. " SER1 ,Slave Select Line 1 Enable Flag" "Not selected,Selected" textline " " bitfld.long 0x00 0. " SER0 ,Slave Select Line 0 Enable Flag" "Not selected,Selected" line.long 0x04 "BAUDR,Baud Rate Select Register" sif cpu()=="ARRIA10SOC" hexmask.long.word 0x04 0.--15. 1. " SCKDV ,SSI Clock Divider" else hexmask.long.word 0x04 0.--15. 1. " SCKDV ,Clock Divider" endif else group.long 0x10++0x07 line.long 0x00 "SER,Slave Enable Register" bitfld.long 0x00 3. " SER3 ,Slave Select Line 3 Enable Flag" "Not selected,Selected" bitfld.long 0x00 2. " SER2 ,Slave Select Line 2 Enable Flag" "Not selected,Selected" bitfld.long 0x00 1. " SER1 ,Slave Select Line 1 Enable Flag" "Not selected,Selected" textline " " bitfld.long 0x00 0. " SER0 ,Slave Select Line 0 Enable Flag" "Not selected,Selected" line.long 0x04 "BAUDR,Baud Rate Select Register" sif cpu()=="ARRIA10SOC" hexmask.long.word 0x04 0.--15. 1. " SCKDV ,SSI Clock Divider" else hexmask.long.word 0x04 0.--15. 1. " SCKDV ,Clock Divider" endif endif group.long 0x18++0x07 line.long 0x00 "TXFTLR,Transmit FIFO Threshold Level Register" hexmask.long.byte 0x00 0.--7. 1. " TFT ,Transmit FIFO Threshold" line.long 0x04 "RXFTLR,Receive FIFO Threshold Level Register" hexmask.long.byte 0x04 0.--7. 1. " TFT ,Receive FIFO Threshold" rgroup.long 0x20++0x07 line.long 0x00 "TXFLR,Transmit FIFO Level Register" hexmask.long.word 0x00 0.--8. 1. " TXTFL ,Transmit FIFO Level" line.long 0x04 "RXFLR,Receive FIFO Level Register" hexmask.long.word 0x04 0.--8. 1. " TXTFL ,Receive FIFO Level" hgroup.long 0x28++0x03 hide.long 0x08 "SR,Status Register" in group.long 0x2C++0x03 line.long 0x00 "IMR,Interrupt Mask Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x00 5. " MSTIS ,Multi-Master Contention Interrupt Status" "Masked,Not masked" textline " " endif bitfld.long 0x00 4. " RXFIM ,Receive FIFO Full Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 3. " RXOIM ,Receive FIFO Overflow Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 2. " RXUIM ,Receive FIFO Underflow Interrupt Mask" "Masked,Not masked" textline " " bitfld.long 0x00 1. " TXOIM ,Transmit FIFO Overflow Interrupt Mask" "Masked,Not masked" bitfld.long 0x00 0. " TXEIM ,Transmit FIFO Empty Interrupt Mask" "Masked,Not masked" rgroup.long 0x30++0x07 line.long 0x00 "ISR,Interrupt Status Register" bitfld.long 0x00 5. " MSTIS ,Multi-Master Contention Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 4. " RXFIS ,Receive FIFO Full Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 3. " RXOIS ,Receive FIFO Overflow Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 2. " RXUIS ,Receive FIFO Underflow Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x00 1. " TXOIS ,Transmit FIFO Overflow Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x00 0. " TXEIS ,Transmit FIFO Empty Interrupt Status" "No interrupt,Interrupt" line.long 0x04 "RISR,Raw Interrupt Status Register" sif cpu()=="ARRIA10SOC" bitfld.long 0x04 5. " MSTIS ,Multi-Master Contention Interrupt Status" "No interrupt,Interrupt" textline " " endif bitfld.long 0x04 4. " RXFIR ,Receive FIFO Full Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 3. " RXOIR ,Receive FIFO Overflow Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 2. " RXUIR ,Receive FIFO Underflow Raw Interrupt Status" "No interrupt,Interrupt" textline " " bitfld.long 0x04 1. " TXOIR ,Transmit FIFO Overflow Raw Interrupt Status" "No interrupt,Interrupt" bitfld.long 0x04 0. " TXEIR ,Transmit FIFO Empty Raw Interrupt Status" "No interrupt,Interrupt" hgroup.long 0x38++0x03 hide.long 0x00 "TXOICR,Transmit FIFO Overflow Interrupt Clear Register" in hgroup.long 0x3C++0x03 hide.long 0x00 "RXOICR,Receive FIFO Overflow Interrupt Clear Register" in hgroup.long 0x40++0x03 hide.long 0x00 "RXUICR,Receive FIFO Underflow Interrupt Clear Register" in sif cpu()=="ARRIA10SOC" hgroup.long 0x44++0x03 hide.long 0x00 "MSTICR,Multi-Master Interrupt Clear Register" in endif hgroup.long 0x48++0x03 hide.long 0x00 "ICR,Interrupt Clear Register" in rgroup.long 0x4C++0x03 line.long 0x00 "DMACR,DMA Control Register" bitfld.long 0x00 1. " TDMAE ,Transmit DMA Enable" "Disabled,Enabled" bitfld.long 0x00 0. " RDMAE ,Receive DMA Enable" "Disabled,Enabled" group.long 0x50++0x07 line.long 0x00 "DMATDLR,DMA Transmit Data Level Register" hexmask.long.byte 0x00 0.--7. 1. " DMATDL ,Transmit Data Level" line.long 0x04 "DMARDLR,DMA Receive Data Level Register" hexmask.long.byte 0x04 0.--7. 1. " DMARDL ,Receive Data Level" rgroup.long 0x58++0x03 line.long 0x00 "IDR,Identification Code" group.long 0x5C++0x07 line.long 0x00 "SPI_VERSION_ID,Component Version Register" line.long 0x04 "DR,Data Register" hexmask.long.word 0x04 0.--15. 1. " DR ,Data" group.long 0xFC++0x03 line.long 0x00 "RX_SAMPLE_DLY,RX Sample Delay" hexmask.long.byte 0x00 0.--6. 1. " RSD ,Rxd Sample Delay" width 0xB tree.end tree.end tree "SCANMGR (Scan Manager Module)" base ad:0xFFF02000 width 16. group.long 0x00++0x7 line.long 0x00 "STAT,Control/Status Word Register" bitfld.long 0x00 31. " ACTIVE ,Scan-Chain Engine Active" "Possibly activated,Activated" rbitfld.long 0x00 28.--30. " WFIFOCNT ,Command FIFO Outstanding Byte Count" "0,1,2,3,4,5,6,7" rbitfld.long 0x00 24.--26. " RFIFOCNT ,Response FIFO Outstanding Byte Count" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 1. " TRST ,Reset output to the FPGA JTAG" "No reset,Reset" line.long 0x04 "EN,Scan-Chain Enable Register" bitfld.long 0x04 7. " FPGAJTAG ,FPGA JTAG Scan-Chain Enable" "Disabled,Enabled" bitfld.long 0x04 3. " IOSCANCHAIN3 ,I/O Scan-Chain 3 Enable" "Disabled,Enabled" bitfld.long 0x04 2. " IOSCANCHAIN2 ,I/O Scan-Chain 2 Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 1. " IOSCANCHAIN1 ,I/O Scan-Chain 1 Enable" "Disabled,Enabled" bitfld.long 0x04 0. " IOSCANCHAIN0 ,I/O Scan-Chain 0 Enable" "Disabled,Enabled" group.long 0x10++0xF line.long 0x00 "FIFOSINGLEBYTE,FIFO Single Byte Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Single Byte Value" line.long 0x04 "FIFODOUBLEBYTE,FIFO Double Byte Register" hexmask.long.word 0x04 0.--15. 1. " VALUE ,Double Byte Value" line.long 0x08 "FIFOTRIPLEBYTE,FIFO Triple Byte Register" hexmask.long.tbyte 0x08 0.--23. 1. " VALUE ,Triple Byte Value" line.long 0x0C "FIFOQUADBYTE,FIFO Quad Byte Register" width 0xB tree.end tree "MPUL2 (MPU L2 cache controller)" base ad:0xFFFEF000 width 28. rgroup.long 0x00++0x03 line.long 0x00 "REG0_CACHE_ID,Cache ID register" hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER ,Implementer" bitfld.long 0x00 10.--15. " CACHE_ID ,Cache id" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--9. " PART_NUM ,Part number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--5. " RTL_RELEASE ,RTL release" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x04++0x03 line.long 0x00 "REG0_CACHE_TYPE,Cache type register" bitfld.long 0x00 31. " DATA_BANKING ,Data banking" "Not implemented,Implemented" bitfld.long 0x00 25.--28. " CTYPE ,Cache type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24. " H ,Unified" "Low,High" bitfld.long 0x00 23. " DSIZE_23 ,Fixed to 0" "0,1" textline " " bitfld.long 0x00 20.--22. " DSIZE_MID ,L2 cache way size Read from Auxiliary Control Register 19 through 17" "0,1,2,3,4,5,6,7" bitfld.long 0x00 19. " DSIZE_19 ,Fixed to 0" "0,1" bitfld.long 0x00 18. " L2_ASSOC_D ,Read from Auxiliary Control Register bit 16" "Low,High" bitfld.long 0x00 12.--13. " L2CACHE_LINE_LEN_D ,L2 cache line length" "0,1,2,3" textline " " bitfld.long 0x00 11. " ISIZE_11 ,Fixed to 0" "0,1" bitfld.long 0x00 8.--10. " ISIZE_MID ,L2 cache way size Read from Auxiliary Control Register[19:17]" "0,1,2,3,4,5,6,7" bitfld.long 0x00 7. " ISIZE_7 ,Fixed to 0" "0,1" bitfld.long 0x00 6. " L2_ASSOC_I ,Read from Auxiliary Control Register bit 16" "Low,High" textline " " bitfld.long 0x00 0.--1. " L2CACHE_LINE_LEN_I ,L2 cache line length" "0,1,2,3" group.long 0x100++0x0F line.long 0x00 "REG1_CONTROL,Control register" bitfld.long 0x00 0. " L2_ENABLE ,L2 Cache enable" "Disabled,Enabled" line.long 0x04 "REG1_AUX_CONTROL,Auxilary control register" bitfld.long 0x04 30. " EARLY_BRESP_EN ,Early BRESP enable" "Disabled,Enabled" bitfld.long 0x04 29. " INSTR_PREFETCH_EN ,Instruction prefetch enable" "Disabled,Enabled" bitfld.long 0x04 28. " DATA_PREFETCH_EN ,Data prefetch enable" "Disabled,Enabled" bitfld.long 0x04 27. " NONSEC_INTE_ACCESS_CTRL ,Non-secure interrupt access control" "Disabled,Enabled" textline " " bitfld.long 0x04 26. " NONSEC_LOCKDOWN_EN ,Non-secure lockdown enable" "Disabled,Enabled" bitfld.long 0x04 25. " CACHE_REPLACE_POLICY ,Cache replacement policy" "Pseudo-random,Round-robin" bitfld.long 0x04 23.--24. " FORCE_WRITE_ALLOC ,Force write allocate" "AWCACHE,No allocate,Override AWCACHE,Mapped to 0" bitfld.long 0x04 22. " SHARED_ATTR_OVERRIDE_EN ,Shared attribute override enable" "Disabled,Enabled" textline " " bitfld.long 0x04 21. " PARITY_EN ,Parity enable" "Disabled,Enabled" bitfld.long 0x04 20. " EVENT_MON_BUS_EN ,Event monitor bus enable" "Disabled,Enabled" bitfld.long 0x04 17.--19. " WAY_SIZE ,Way-size" "Reserved,16KB,32KB,64KB,128KB,256KB,512KB,?..." bitfld.long 0x04 16. " ASSOCIATIVITY ,Associativity" "8-way,16-way" textline " " bitfld.long 0x04 13. " SHARED_ATTR_INVA_EN ,Shared Attribute Invalidate" "Disabled,Enabled" bitfld.long 0x04 12. " EX_CACHE_CONFIG ,Exclusive cache configuration" "Disabled,Enabled" bitfld.long 0x04 11. " STORE_BUFF_DEV_LIM_EN ,Store buffer device limitation Enable" "Disabled,Enabled" bitfld.long 0x04 10. " HIGH_PR_SO_DEV_RD_EN ,High Priority for SO and Dev Reads Enable" "Disabled,Enabled" textline " " bitfld.long 0x04 0. " FULL_LINE_ZERO_ENABLE ,Full Line of Zero Enable" "Disabled,Enabled" line.long 0x08 "REG1_TAG_RAM_CONTROL,Configures Tag RAM latencies" bitfld.long 0x08 8.--10. " RAM_WR_ACCESS_LAT ,RAM write access latency" "1 cycle,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,7 cycles,8 cycles" bitfld.long 0x08 4.--6. " RAM_RD_ACCESS_LAT ,RAM read access" "1 cycle,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,7 cycles,8 cycles" bitfld.long 0x08 0.--2. " RAM_SETUP_LAT ,RAM setup latency" "1 cycle,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,7 cycles,8 cycles" line.long 0x0C "REG1_DATA_RAM_CONTROL,Configures data RAM latencies" bitfld.long 0x0C 8.--10. " RAM_WR_ACCESS_LAT ,RAM write access latency" "1 cycle,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,7 cycles,8 cycles" bitfld.long 0x0C 4.--6. " RAM_RD_ACCESS_LAT ,RAM read access" "1 cycle,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,7 cycles,8 cycles" bitfld.long 0x0C 0.--2. " RAM_SETUP_LAT ,RAM setup latency" "1 cycle,2 cycles,3 cycles,4 cycles,5 cycles,6 cycles,7 cycles,8 cycles" group.long 0x200++0x17 line.long 0x00 "REG2_EV_COUNTER_CTRL,Event Counter Control Register" bitfld.long 0x00 2. " COUNTER1_RESET ,Event Counter1 reset" "No reset,Reset" bitfld.long 0x00 1. " COUNTER0_RESET ,Event Counter0 reset" "No reset,Reset" bitfld.long 0x00 0. " EV_CTR_EN ,Event counter enable" "Disabled,Enabled" line.long 0x04 "REG2_EV_COUNTER1_CFG,Event Counter 0 Configuration Register" bitfld.long 0x04 2.--5. " CTR_EV_SRC ,Counter event source Event Encoding" "Disabled,CO,DRHIT,DRREQ,DWHIT,DWREQ,DWTREQ,IRHIT,IRREQ,WA,IPFALLOC,EPFHIT,EPFALLOC,SRRCVD,SRCONF,EPFRCVD" bitfld.long 0x04 0.--1. " EV_CTR_INTR_GEN ,Event counter interrupt generation" "Disabled,Enabled/Increment,Enabled/Overflow,Disabled" line.long 0x08 "REG2_EV_COUNTER0_CFG,Event Counter 0 Configuration Register" bitfld.long 0x08 2.--5. " CTR_EV_SRC ,Counter event source Event Encoding" "Disabled,CO,DRHIT,DRREQ,DWHIT,DWREQ,DWTREQ,IRHIT,IRREQ,WA,IPFALLOC,EPFHIT,EPFALLOC,SRRCVD,SRCONF,EPFRCVD" bitfld.long 0x08 0.--1. " EV_CTR_INTR_GEN ,Event counter interrupt generation" "Disabled,Enabled/Increment,Enabled/Overflow,Disabled" line.long 0x0C "REG2_EV_COUNTER1,Event Counter 1 Register" line.long 0x10 "REG2_EV_COUNTER0,Event Counter 0 Register" line.long 0x14 "REG2_INT_MASK,Interrupt Mask Register" bitfld.long 0x14 8. " DECERR ,DECERR from L3" "Masked,Not masked" bitfld.long 0x14 7. " SLVERR ,SLVERR from L3" "Masked,Not masked" bitfld.long 0x14 6. " ERRRD ,Error on L2 data RAM Read" "Masked,Not masked" bitfld.long 0x14 5. " ERRRT ,Error on L2 tag RAM Read" "Masked,Not masked" textline " " bitfld.long 0x14 4. " ERRWD ,Error on L2 data RAM Write" "Masked,Not masked" bitfld.long 0x14 3. " ERRWT ,Error on L2 tag RAM Write" "Masked,Not masked" bitfld.long 0x14 2. " PARRD ,Parity Error on L2 data RAM Read" "Masked,Not masked" bitfld.long 0x14 1. " PARRT ,Parity Error on L2 tag RAM Read" "Masked,Not masked" textline " " bitfld.long 0x14 0. " ECNTR ,Event Counter1/0 Overflow Increment" "Masked,Not masked" rgroup.long 0x218++0x07 line.long 0x00 "REG2_INT_MASK_STATUS,Masked interrupt status" bitfld.long 0x00 8. " DECERR ,DECERR from L3" "Low,High" bitfld.long 0x00 7. " SLVERR ,SLVERR from L3" "Low,High" bitfld.long 0x00 6. " ERRRD ,Error on L2 data RAM Read" "Low,High" bitfld.long 0x00 5. " ERRRT ,Error on L2 tag RAM Read" "Low,High" textline " " bitfld.long 0x00 4. " ERRWD ,Error on L2 data RAM Write" "Low,High" bitfld.long 0x00 3. " ERRWT ,Error on L2 tag RAM Write" "Low,High" bitfld.long 0x00 2. " PARRD ,Parity Error on L2 data RAM Read" "Low,High" bitfld.long 0x00 1. " PARRT ,Parity Error on L2 tag RAM Read" "Low,High" textline " " bitfld.long 0x00 0. " ECNTR ,Event Counter1/0 Overflow Increment" "Low,High" line.long 0x04 "REG2_INT_RAW_STATUS,Interrupt Raw Status Register" bitfld.long 0x04 8. " DECERR ,DECERR from L3" "Low,High" bitfld.long 0x04 7. " SLVERR ,SLVERR from L3" "Low,High" bitfld.long 0x04 6. " ERRRD ,Error on L2 data RAM Read" "Low,High" bitfld.long 0x04 5. " ERRRT ,Error on L2 tag RAM Read" "Low,High" textline " " bitfld.long 0x04 4. " ERRWD ,Error on L2 data RAM Write" "Low,High" bitfld.long 0x04 3. " ERRWT ,Error on L2 tag RAM Write" "Low,High" bitfld.long 0x04 2. " PARRD ,Parity Error on L2 data RAM Read" "Low,High" bitfld.long 0x04 1. " PARRT ,Parity Error on L2 tag RAM Read" "Low,High" textline " " bitfld.long 0x04 0. " ECNTR ,Event Counter1/0 Overflow Increment" "Low,High" wgroup.long 0x220++0x03 line.long 0x00 "REG2_INT_CLEAR,Clears the Raw Interrupt Status Register" bitfld.long 0x00 8. " DECERR ,DECERR from L3" "No effect,Clear" bitfld.long 0x00 7. " SLVERR ,SLVERR from L3" "No effect,Clear" bitfld.long 0x00 6. " ERRRD ,Error on L2 data RAM Read" "No effect,Clear" bitfld.long 0x00 5. " ERRRT ,Error on L2 tag RAM Read" "No effect,Clear" textline " " bitfld.long 0x00 4. " ERRWD ,Error on L2 data RAM Write" "No effect,Clear" bitfld.long 0x00 3. " ERRWT ,Error on L2 tag RAM Write" "No effect,Clear" bitfld.long 0x00 2. " PARRD ,Parity Error on L2 data RAM Read" "No effect,Clear" bitfld.long 0x00 1. " PARRT ,Parity Error on L2 tag RAM Read" "No effect,Clear" textline " " bitfld.long 0x00 0. " ECNTR ,Event Counter1/0 Overflow Increment" "No effect,Clear" group.long 0x730++0x03 line.long 0x00 "REG7_CACHE_SYNC,Drain the STB" bitfld.long 0x00 0. " C ,Cache sync" "Not drained,Drained" group.long 0x770++0x03 line.long 0x00 "REG7_INV_PA,Invalidate Line by PA" hexmask.long.tbyte 0x00 12.--31. 1. " TAG ,Tag" hexmask.long.byte 0x00 5.--11. 1. " INDEX ,Index" bitfld.long 0x00 0. " C ,C" "Low,High" group.long 0x77C++0x03 line.long 0x00 "REG7_INV_WAY,Invalidate by Way Invalidate all data in specified ways" hexmask.long.word 0x00 0.--15. 1. " WAY_BITS ,Way bits" group.long 0x7B0++0x03 line.long 0x00 "REG7_CLEAN_PA,Clean Line by PA" hexmask.long.tbyte 0x00 12.--31. 1. " TAG ,Tag" hexmask.long.byte 0x00 5.--11. 1. " INDEX ,Index" bitfld.long 0x00 0. " C ,C" "Low,High" group.long 0x7B8++0x07 line.long 0x00 "REG7_CLEAN_INDEX,Clean Line by Set/Way Write the specific L2 cache line" bitfld.long 0x00 28.--31. " WAY ,Way" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 5.--11. 1. " INDEX ,Index" bitfld.long 0x00 0. " C ,C" "Low,High" line.long 0x04 "REG7_CLEAN_WAY,Clean by Way Writes each line of the specified L2 cache ways" hexmask.long.word 0x04 0.--15. 1. " WAY_BITS ,Way bits" group.long 0x7F0++0x03 line.long 0x00 "REG7_CLEAN_INV_PA,Clean and Invalidate Line by PA Write the specific L2 cache line" hexmask.long.tbyte 0x00 12.--31. 1. " TAG ,Tag" hexmask.long.byte 0x00 5.--11. 1. " INDEX ,Index" bitfld.long 0x00 0. " C ,C" "Low,High" group.long 0x7F8++0x07 line.long 0x00 "REG7_CLEAN_INV_INDEX,Clean and Invalidate Line by Set/Way Write the specific L2 cache line" bitfld.long 0x00 28.--31. " WAY ,Way" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 5.--11. 1. " INDEX ,Index" bitfld.long 0x00 0. " C ,C" "Low,High" line.long 0x04 "REG7_CLEAN_INV_WAY,Clean and Invalidate by Way Writes each line of the specified L2 cache ways" hexmask.long.word 0x04 0.--15. 1. " WAY_BITS ,Way bits" group.long 0x900++0x3F line.long 0x0 "REG9_D_LOCKDOWN0,Data lock down 0" bitfld.long 0x0 15. " DATALOCK000[15] ,Cache data lockdown 15" "Allocation,No allocation" bitfld.long 0x0 14. " DATALOCK000[14] ,Cache data lockdown 14" "Allocation,No allocation" bitfld.long 0x0 13. " DATALOCK000[13] ,Cache data lockdown 13" "Allocation,No allocation" bitfld.long 0x0 12. " DATALOCK000[12] ,Cache data lockdown 12" "Allocation,No allocation" textline " " bitfld.long 0x0 11. " DATALOCK000[11] ,Cache data lockdown 11" "Allocation,No allocation" bitfld.long 0x0 10. " DATALOCK000[10] ,Cache data lockdown 10" "Allocation,No allocation" bitfld.long 0x0 9. " DATALOCK000[9] ,Cache data lockdown 9" "Allocation,No allocation" bitfld.long 0x0 8. " DATALOCK000[8] ,Cache data lockdown 8" "Allocation,No allocation" textline " " bitfld.long 0x0 7. " DATALOCK000[7] ,Cache data lockdown 7" "Allocation,No allocation" bitfld.long 0x0 6. " DATALOCK000[6] ,Cache data lockdown 6" "Allocation,No allocation" bitfld.long 0x0 5. " DATALOCK000[5] ,Cache data lockdown 5" "Allocation,No allocation" bitfld.long 0x0 4. " DATALOCK000[4] ,Cache data lockdown 4" "Allocation,No allocation" textline " " bitfld.long 0x0 3. " DATALOCK000[3] ,Cache data lockdown 3" "Allocation,No allocation" bitfld.long 0x0 2. " DATALOCK000[2] ,Cache data lockdown 2" "Allocation,No allocation" bitfld.long 0x0 1. " DATALOCK000[1] ,Cache data lockdown 1" "Allocation,No allocation" bitfld.long 0x0 0. " DATALOCK000[0] ,Cache data lockdown 0" "Allocation,No allocation" line.long (0x0+0x04) "REG9_I_LOCKDOWN0,Instruction lock down 0" bitfld.long (0x0+0x04) 15. " INSTRLOCK000[15] ,Cache instruction lockdown 15" "Low,High" bitfld.long (0x0+0x04) 14. " INSTRLOCK000[14] ,Cache instruction lockdown 14" "Low,High" bitfld.long (0x0+0x04) 13. " INSTRLOCK000[13] ,Cache instruction lockdown 13" "Low,High" bitfld.long (0x0+0x04) 12. " INSTRLOCK000[12] ,Cache instruction lockdown 12" "Low,High" textline " " bitfld.long (0x0+0x04) 11. " INSTRLOCK000[11] ,Cache instruction lockdown 11" "Low,High" bitfld.long (0x0+0x04) 10. " INSTRLOCK000[10] ,Cache instruction lockdown 10" "Low,High" bitfld.long (0x0+0x04) 9. " INSTRLOCK000[9] ,Cache instruction lockdown 9" "Low,High" bitfld.long (0x0+0x04) 8. " INSTRLOCK000[8] ,Cache instruction lockdown 8" "Low,High" textline " " bitfld.long (0x0+0x04) 7. " INSTRLOCK000[7] ,Cache instruction lockdown 7" "Low,High" bitfld.long (0x0+0x04) 6. " INSTRLOCK000[6] ,Cache instruction lockdown 6" "Low,High" bitfld.long (0x0+0x04) 5. " INSTRLOCK000[5] ,Cache instruction lockdown 5" "Low,High" bitfld.long (0x0+0x04) 4. " INSTRLOCK000[4] ,Cache instruction lockdown 4" "Low,High" textline " " bitfld.long (0x0+0x04) 3. " INSTRLOCK000[3] ,Cache instruction lockdown 3" "Low,High" bitfld.long (0x0+0x04) 2. " INSTRLOCK000[2] ,Cache instruction lockdown 2" "Low,High" bitfld.long (0x0+0x04) 1. " INSTRLOCK000[1] ,Cache instruction lockdown 1" "Low,High" bitfld.long (0x0+0x04) 0. " INSTRLOCK000[0] ,Cache instruction lockdown 0" "Low,High" line.long 0x8 "REG9_D_LOCKDOWN1,Data lock down 1" bitfld.long 0x8 15. " DATALOCK001[15] ,Cache data lockdown 15" "Allocation,No allocation" bitfld.long 0x8 14. " DATALOCK001[14] ,Cache data lockdown 14" "Allocation,No allocation" bitfld.long 0x8 13. " DATALOCK001[13] ,Cache data lockdown 13" "Allocation,No allocation" bitfld.long 0x8 12. " DATALOCK001[12] ,Cache data lockdown 12" "Allocation,No allocation" textline " " bitfld.long 0x8 11. " DATALOCK001[11] ,Cache data lockdown 11" "Allocation,No allocation" bitfld.long 0x8 10. " DATALOCK001[10] ,Cache data lockdown 10" "Allocation,No allocation" bitfld.long 0x8 9. " DATALOCK001[9] ,Cache data lockdown 9" "Allocation,No allocation" bitfld.long 0x8 8. " DATALOCK001[8] ,Cache data lockdown 8" "Allocation,No allocation" textline " " bitfld.long 0x8 7. " DATALOCK001[7] ,Cache data lockdown 7" "Allocation,No allocation" bitfld.long 0x8 6. " DATALOCK001[6] ,Cache data lockdown 6" "Allocation,No allocation" bitfld.long 0x8 5. " DATALOCK001[5] ,Cache data lockdown 5" "Allocation,No allocation" bitfld.long 0x8 4. " DATALOCK001[4] ,Cache data lockdown 4" "Allocation,No allocation" textline " " bitfld.long 0x8 3. " DATALOCK001[3] ,Cache data lockdown 3" "Allocation,No allocation" bitfld.long 0x8 2. " DATALOCK001[2] ,Cache data lockdown 2" "Allocation,No allocation" bitfld.long 0x8 1. " DATALOCK001[1] ,Cache data lockdown 1" "Allocation,No allocation" bitfld.long 0x8 0. " DATALOCK001[0] ,Cache data lockdown 0" "Allocation,No allocation" line.long (0x8+0x04) "REG9_I_LOCKDOWN1,Instruction lock down 1" bitfld.long (0x8+0x04) 15. " INSTRLOCK001[15] ,Cache instruction lockdown 15" "Low,High" bitfld.long (0x8+0x04) 14. " INSTRLOCK001[14] ,Cache instruction lockdown 14" "Low,High" bitfld.long (0x8+0x04) 13. " INSTRLOCK001[13] ,Cache instruction lockdown 13" "Low,High" bitfld.long (0x8+0x04) 12. " INSTRLOCK001[12] ,Cache instruction lockdown 12" "Low,High" textline " " bitfld.long (0x8+0x04) 11. " INSTRLOCK001[11] ,Cache instruction lockdown 11" "Low,High" bitfld.long (0x8+0x04) 10. " INSTRLOCK001[10] ,Cache instruction lockdown 10" "Low,High" bitfld.long (0x8+0x04) 9. " INSTRLOCK001[9] ,Cache instruction lockdown 9" "Low,High" bitfld.long (0x8+0x04) 8. " INSTRLOCK001[8] ,Cache instruction lockdown 8" "Low,High" textline " " bitfld.long (0x8+0x04) 7. " INSTRLOCK001[7] ,Cache instruction lockdown 7" "Low,High" bitfld.long (0x8+0x04) 6. " INSTRLOCK001[6] ,Cache instruction lockdown 6" "Low,High" bitfld.long (0x8+0x04) 5. " INSTRLOCK001[5] ,Cache instruction lockdown 5" "Low,High" bitfld.long (0x8+0x04) 4. " INSTRLOCK001[4] ,Cache instruction lockdown 4" "Low,High" textline " " bitfld.long (0x8+0x04) 3. " INSTRLOCK001[3] ,Cache instruction lockdown 3" "Low,High" bitfld.long (0x8+0x04) 2. " INSTRLOCK001[2] ,Cache instruction lockdown 2" "Low,High" bitfld.long (0x8+0x04) 1. " INSTRLOCK001[1] ,Cache instruction lockdown 1" "Low,High" bitfld.long (0x8+0x04) 0. " INSTRLOCK001[0] ,Cache instruction lockdown 0" "Low,High" line.long 0x10 "REG9_D_LOCKDOWN2,Data lock down 2" bitfld.long 0x10 15. " DATALOCK010[15] ,Cache data lockdown 15" "Allocation,No allocation" bitfld.long 0x10 14. " DATALOCK010[14] ,Cache data lockdown 14" "Allocation,No allocation" bitfld.long 0x10 13. " DATALOCK010[13] ,Cache data lockdown 13" "Allocation,No allocation" bitfld.long 0x10 12. " DATALOCK010[12] ,Cache data lockdown 12" "Allocation,No allocation" textline " " bitfld.long 0x10 11. " DATALOCK010[11] ,Cache data lockdown 11" "Allocation,No allocation" bitfld.long 0x10 10. " DATALOCK010[10] ,Cache data lockdown 10" "Allocation,No allocation" bitfld.long 0x10 9. " DATALOCK010[9] ,Cache data lockdown 9" "Allocation,No allocation" bitfld.long 0x10 8. " DATALOCK010[8] ,Cache data lockdown 8" "Allocation,No allocation" textline " " bitfld.long 0x10 7. " DATALOCK010[7] ,Cache data lockdown 7" "Allocation,No allocation" bitfld.long 0x10 6. " DATALOCK010[6] ,Cache data lockdown 6" "Allocation,No allocation" bitfld.long 0x10 5. " DATALOCK010[5] ,Cache data lockdown 5" "Allocation,No allocation" bitfld.long 0x10 4. " DATALOCK010[4] ,Cache data lockdown 4" "Allocation,No allocation" textline " " bitfld.long 0x10 3. " DATALOCK010[3] ,Cache data lockdown 3" "Allocation,No allocation" bitfld.long 0x10 2. " DATALOCK010[2] ,Cache data lockdown 2" "Allocation,No allocation" bitfld.long 0x10 1. " DATALOCK010[1] ,Cache data lockdown 1" "Allocation,No allocation" bitfld.long 0x10 0. " DATALOCK010[0] ,Cache data lockdown 0" "Allocation,No allocation" line.long (0x10+0x04) "REG9_I_LOCKDOWN2,Instruction lock down 2" bitfld.long (0x10+0x04) 15. " INSTRLOCK010[15] ,Cache instruction lockdown 15" "Low,High" bitfld.long (0x10+0x04) 14. " INSTRLOCK010[14] ,Cache instruction lockdown 14" "Low,High" bitfld.long (0x10+0x04) 13. " INSTRLOCK010[13] ,Cache instruction lockdown 13" "Low,High" bitfld.long (0x10+0x04) 12. " INSTRLOCK010[12] ,Cache instruction lockdown 12" "Low,High" textline " " bitfld.long (0x10+0x04) 11. " INSTRLOCK010[11] ,Cache instruction lockdown 11" "Low,High" bitfld.long (0x10+0x04) 10. " INSTRLOCK010[10] ,Cache instruction lockdown 10" "Low,High" bitfld.long (0x10+0x04) 9. " INSTRLOCK010[9] ,Cache instruction lockdown 9" "Low,High" bitfld.long (0x10+0x04) 8. " INSTRLOCK010[8] ,Cache instruction lockdown 8" "Low,High" textline " " bitfld.long (0x10+0x04) 7. " INSTRLOCK010[7] ,Cache instruction lockdown 7" "Low,High" bitfld.long (0x10+0x04) 6. " INSTRLOCK010[6] ,Cache instruction lockdown 6" "Low,High" bitfld.long (0x10+0x04) 5. " INSTRLOCK010[5] ,Cache instruction lockdown 5" "Low,High" bitfld.long (0x10+0x04) 4. " INSTRLOCK010[4] ,Cache instruction lockdown 4" "Low,High" textline " " bitfld.long (0x10+0x04) 3. " INSTRLOCK010[3] ,Cache instruction lockdown 3" "Low,High" bitfld.long (0x10+0x04) 2. " INSTRLOCK010[2] ,Cache instruction lockdown 2" "Low,High" bitfld.long (0x10+0x04) 1. " INSTRLOCK010[1] ,Cache instruction lockdown 1" "Low,High" bitfld.long (0x10+0x04) 0. " INSTRLOCK010[0] ,Cache instruction lockdown 0" "Low,High" line.long 0x18 "REG9_D_LOCKDOWN3,Data lock down 3" bitfld.long 0x18 15. " DATALOCK011[15] ,Cache data lockdown 15" "Allocation,No allocation" bitfld.long 0x18 14. " DATALOCK011[14] ,Cache data lockdown 14" "Allocation,No allocation" bitfld.long 0x18 13. " DATALOCK011[13] ,Cache data lockdown 13" "Allocation,No allocation" bitfld.long 0x18 12. " DATALOCK011[12] ,Cache data lockdown 12" "Allocation,No allocation" textline " " bitfld.long 0x18 11. " DATALOCK011[11] ,Cache data lockdown 11" "Allocation,No allocation" bitfld.long 0x18 10. " DATALOCK011[10] ,Cache data lockdown 10" "Allocation,No allocation" bitfld.long 0x18 9. " DATALOCK011[9] ,Cache data lockdown 9" "Allocation,No allocation" bitfld.long 0x18 8. " DATALOCK011[8] ,Cache data lockdown 8" "Allocation,No allocation" textline " " bitfld.long 0x18 7. " DATALOCK011[7] ,Cache data lockdown 7" "Allocation,No allocation" bitfld.long 0x18 6. " DATALOCK011[6] ,Cache data lockdown 6" "Allocation,No allocation" bitfld.long 0x18 5. " DATALOCK011[5] ,Cache data lockdown 5" "Allocation,No allocation" bitfld.long 0x18 4. " DATALOCK011[4] ,Cache data lockdown 4" "Allocation,No allocation" textline " " bitfld.long 0x18 3. " DATALOCK011[3] ,Cache data lockdown 3" "Allocation,No allocation" bitfld.long 0x18 2. " DATALOCK011[2] ,Cache data lockdown 2" "Allocation,No allocation" bitfld.long 0x18 1. " DATALOCK011[1] ,Cache data lockdown 1" "Allocation,No allocation" bitfld.long 0x18 0. " DATALOCK011[0] ,Cache data lockdown 0" "Allocation,No allocation" line.long (0x18+0x04) "REG9_I_LOCKDOWN3,Instruction lock down 3" bitfld.long (0x18+0x04) 15. " INSTRLOCK011[15] ,Cache instruction lockdown 15" "Low,High" bitfld.long (0x18+0x04) 14. " INSTRLOCK011[14] ,Cache instruction lockdown 14" "Low,High" bitfld.long (0x18+0x04) 13. " INSTRLOCK011[13] ,Cache instruction lockdown 13" "Low,High" bitfld.long (0x18+0x04) 12. " INSTRLOCK011[12] ,Cache instruction lockdown 12" "Low,High" textline " " bitfld.long (0x18+0x04) 11. " INSTRLOCK011[11] ,Cache instruction lockdown 11" "Low,High" bitfld.long (0x18+0x04) 10. " INSTRLOCK011[10] ,Cache instruction lockdown 10" "Low,High" bitfld.long (0x18+0x04) 9. " INSTRLOCK011[9] ,Cache instruction lockdown 9" "Low,High" bitfld.long (0x18+0x04) 8. " INSTRLOCK011[8] ,Cache instruction lockdown 8" "Low,High" textline " " bitfld.long (0x18+0x04) 7. " INSTRLOCK011[7] ,Cache instruction lockdown 7" "Low,High" bitfld.long (0x18+0x04) 6. " INSTRLOCK011[6] ,Cache instruction lockdown 6" "Low,High" bitfld.long (0x18+0x04) 5. " INSTRLOCK011[5] ,Cache instruction lockdown 5" "Low,High" bitfld.long (0x18+0x04) 4. " INSTRLOCK011[4] ,Cache instruction lockdown 4" "Low,High" textline " " bitfld.long (0x18+0x04) 3. " INSTRLOCK011[3] ,Cache instruction lockdown 3" "Low,High" bitfld.long (0x18+0x04) 2. " INSTRLOCK011[2] ,Cache instruction lockdown 2" "Low,High" bitfld.long (0x18+0x04) 1. " INSTRLOCK011[1] ,Cache instruction lockdown 1" "Low,High" bitfld.long (0x18+0x04) 0. " INSTRLOCK011[0] ,Cache instruction lockdown 0" "Low,High" line.long 0x20 "REG9_D_LOCKDOWN4,Data lock down 4" bitfld.long 0x20 15. " DATALOCK100[15] ,Cache data lockdown 15" "Allocation,No allocation" bitfld.long 0x20 14. " DATALOCK100[14] ,Cache data lockdown 14" "Allocation,No allocation" bitfld.long 0x20 13. " DATALOCK100[13] ,Cache data lockdown 13" "Allocation,No allocation" bitfld.long 0x20 12. " DATALOCK100[12] ,Cache data lockdown 12" "Allocation,No allocation" textline " " bitfld.long 0x20 11. " DATALOCK100[11] ,Cache data lockdown 11" "Allocation,No allocation" bitfld.long 0x20 10. " DATALOCK100[10] ,Cache data lockdown 10" "Allocation,No allocation" bitfld.long 0x20 9. " DATALOCK100[9] ,Cache data lockdown 9" "Allocation,No allocation" bitfld.long 0x20 8. " DATALOCK100[8] ,Cache data lockdown 8" "Allocation,No allocation" textline " " bitfld.long 0x20 7. " DATALOCK100[7] ,Cache data lockdown 7" "Allocation,No allocation" bitfld.long 0x20 6. " DATALOCK100[6] ,Cache data lockdown 6" "Allocation,No allocation" bitfld.long 0x20 5. " DATALOCK100[5] ,Cache data lockdown 5" "Allocation,No allocation" bitfld.long 0x20 4. " DATALOCK100[4] ,Cache data lockdown 4" "Allocation,No allocation" textline " " bitfld.long 0x20 3. " DATALOCK100[3] ,Cache data lockdown 3" "Allocation,No allocation" bitfld.long 0x20 2. " DATALOCK100[2] ,Cache data lockdown 2" "Allocation,No allocation" bitfld.long 0x20 1. " DATALOCK100[1] ,Cache data lockdown 1" "Allocation,No allocation" bitfld.long 0x20 0. " DATALOCK100[0] ,Cache data lockdown 0" "Allocation,No allocation" line.long (0x20+0x04) "REG9_I_LOCKDOWN4,Instruction lock down 4" bitfld.long (0x20+0x04) 15. " INSTRLOCK100[15] ,Cache instruction lockdown 15" "Low,High" bitfld.long (0x20+0x04) 14. " INSTRLOCK100[14] ,Cache instruction lockdown 14" "Low,High" bitfld.long (0x20+0x04) 13. " INSTRLOCK100[13] ,Cache instruction lockdown 13" "Low,High" bitfld.long (0x20+0x04) 12. " INSTRLOCK100[12] ,Cache instruction lockdown 12" "Low,High" textline " " bitfld.long (0x20+0x04) 11. " INSTRLOCK100[11] ,Cache instruction lockdown 11" "Low,High" bitfld.long (0x20+0x04) 10. " INSTRLOCK100[10] ,Cache instruction lockdown 10" "Low,High" bitfld.long (0x20+0x04) 9. " INSTRLOCK100[9] ,Cache instruction lockdown 9" "Low,High" bitfld.long (0x20+0x04) 8. " INSTRLOCK100[8] ,Cache instruction lockdown 8" "Low,High" textline " " bitfld.long (0x20+0x04) 7. " INSTRLOCK100[7] ,Cache instruction lockdown 7" "Low,High" bitfld.long (0x20+0x04) 6. " INSTRLOCK100[6] ,Cache instruction lockdown 6" "Low,High" bitfld.long (0x20+0x04) 5. " INSTRLOCK100[5] ,Cache instruction lockdown 5" "Low,High" bitfld.long (0x20+0x04) 4. " INSTRLOCK100[4] ,Cache instruction lockdown 4" "Low,High" textline " " bitfld.long (0x20+0x04) 3. " INSTRLOCK100[3] ,Cache instruction lockdown 3" "Low,High" bitfld.long (0x20+0x04) 2. " INSTRLOCK100[2] ,Cache instruction lockdown 2" "Low,High" bitfld.long (0x20+0x04) 1. " INSTRLOCK100[1] ,Cache instruction lockdown 1" "Low,High" bitfld.long (0x20+0x04) 0. " INSTRLOCK100[0] ,Cache instruction lockdown 0" "Low,High" line.long 0x28 "REG9_D_LOCKDOWN5,Data lock down 5" bitfld.long 0x28 15. " DATALOCK101[15] ,Cache data lockdown 15" "Allocation,No allocation" bitfld.long 0x28 14. " DATALOCK101[14] ,Cache data lockdown 14" "Allocation,No allocation" bitfld.long 0x28 13. " DATALOCK101[13] ,Cache data lockdown 13" "Allocation,No allocation" bitfld.long 0x28 12. " DATALOCK101[12] ,Cache data lockdown 12" "Allocation,No allocation" textline " " bitfld.long 0x28 11. " DATALOCK101[11] ,Cache data lockdown 11" "Allocation,No allocation" bitfld.long 0x28 10. " DATALOCK101[10] ,Cache data lockdown 10" "Allocation,No allocation" bitfld.long 0x28 9. " DATALOCK101[9] ,Cache data lockdown 9" "Allocation,No allocation" bitfld.long 0x28 8. " DATALOCK101[8] ,Cache data lockdown 8" "Allocation,No allocation" textline " " bitfld.long 0x28 7. " DATALOCK101[7] ,Cache data lockdown 7" "Allocation,No allocation" bitfld.long 0x28 6. " DATALOCK101[6] ,Cache data lockdown 6" "Allocation,No allocation" bitfld.long 0x28 5. " DATALOCK101[5] ,Cache data lockdown 5" "Allocation,No allocation" bitfld.long 0x28 4. " DATALOCK101[4] ,Cache data lockdown 4" "Allocation,No allocation" textline " " bitfld.long 0x28 3. " DATALOCK101[3] ,Cache data lockdown 3" "Allocation,No allocation" bitfld.long 0x28 2. " DATALOCK101[2] ,Cache data lockdown 2" "Allocation,No allocation" bitfld.long 0x28 1. " DATALOCK101[1] ,Cache data lockdown 1" "Allocation,No allocation" bitfld.long 0x28 0. " DATALOCK101[0] ,Cache data lockdown 0" "Allocation,No allocation" line.long (0x28+0x04) "REG9_I_LOCKDOWN5,Instruction lock down 5" bitfld.long (0x28+0x04) 15. " INSTRLOCK101[15] ,Cache instruction lockdown 15" "Low,High" bitfld.long (0x28+0x04) 14. " INSTRLOCK101[14] ,Cache instruction lockdown 14" "Low,High" bitfld.long (0x28+0x04) 13. " INSTRLOCK101[13] ,Cache instruction lockdown 13" "Low,High" bitfld.long (0x28+0x04) 12. " INSTRLOCK101[12] ,Cache instruction lockdown 12" "Low,High" textline " " bitfld.long (0x28+0x04) 11. " INSTRLOCK101[11] ,Cache instruction lockdown 11" "Low,High" bitfld.long (0x28+0x04) 10. " INSTRLOCK101[10] ,Cache instruction lockdown 10" "Low,High" bitfld.long (0x28+0x04) 9. " INSTRLOCK101[9] ,Cache instruction lockdown 9" "Low,High" bitfld.long (0x28+0x04) 8. " INSTRLOCK101[8] ,Cache instruction lockdown 8" "Low,High" textline " " bitfld.long (0x28+0x04) 7. " INSTRLOCK101[7] ,Cache instruction lockdown 7" "Low,High" bitfld.long (0x28+0x04) 6. " INSTRLOCK101[6] ,Cache instruction lockdown 6" "Low,High" bitfld.long (0x28+0x04) 5. " INSTRLOCK101[5] ,Cache instruction lockdown 5" "Low,High" bitfld.long (0x28+0x04) 4. " INSTRLOCK101[4] ,Cache instruction lockdown 4" "Low,High" textline " " bitfld.long (0x28+0x04) 3. " INSTRLOCK101[3] ,Cache instruction lockdown 3" "Low,High" bitfld.long (0x28+0x04) 2. " INSTRLOCK101[2] ,Cache instruction lockdown 2" "Low,High" bitfld.long (0x28+0x04) 1. " INSTRLOCK101[1] ,Cache instruction lockdown 1" "Low,High" bitfld.long (0x28+0x04) 0. " INSTRLOCK101[0] ,Cache instruction lockdown 0" "Low,High" line.long 0x30 "REG9_D_LOCKDOWN6,Data lock down 6" bitfld.long 0x30 15. " DATALOCK110[15] ,Cache data lockdown 15" "Allocation,No allocation" bitfld.long 0x30 14. " DATALOCK110[14] ,Cache data lockdown 14" "Allocation,No allocation" bitfld.long 0x30 13. " DATALOCK110[13] ,Cache data lockdown 13" "Allocation,No allocation" bitfld.long 0x30 12. " DATALOCK110[12] ,Cache data lockdown 12" "Allocation,No allocation" textline " " bitfld.long 0x30 11. " DATALOCK110[11] ,Cache data lockdown 11" "Allocation,No allocation" bitfld.long 0x30 10. " DATALOCK110[10] ,Cache data lockdown 10" "Allocation,No allocation" bitfld.long 0x30 9. " DATALOCK110[9] ,Cache data lockdown 9" "Allocation,No allocation" bitfld.long 0x30 8. " DATALOCK110[8] ,Cache data lockdown 8" "Allocation,No allocation" textline " " bitfld.long 0x30 7. " DATALOCK110[7] ,Cache data lockdown 7" "Allocation,No allocation" bitfld.long 0x30 6. " DATALOCK110[6] ,Cache data lockdown 6" "Allocation,No allocation" bitfld.long 0x30 5. " DATALOCK110[5] ,Cache data lockdown 5" "Allocation,No allocation" bitfld.long 0x30 4. " DATALOCK110[4] ,Cache data lockdown 4" "Allocation,No allocation" textline " " bitfld.long 0x30 3. " DATALOCK110[3] ,Cache data lockdown 3" "Allocation,No allocation" bitfld.long 0x30 2. " DATALOCK110[2] ,Cache data lockdown 2" "Allocation,No allocation" bitfld.long 0x30 1. " DATALOCK110[1] ,Cache data lockdown 1" "Allocation,No allocation" bitfld.long 0x30 0. " DATALOCK110[0] ,Cache data lockdown 0" "Allocation,No allocation" line.long (0x30+0x04) "REG9_I_LOCKDOWN6,Instruction lock down 6" bitfld.long (0x30+0x04) 15. " INSTRLOCK110[15] ,Cache instruction lockdown 15" "Low,High" bitfld.long (0x30+0x04) 14. " INSTRLOCK110[14] ,Cache instruction lockdown 14" "Low,High" bitfld.long (0x30+0x04) 13. " INSTRLOCK110[13] ,Cache instruction lockdown 13" "Low,High" bitfld.long (0x30+0x04) 12. " INSTRLOCK110[12] ,Cache instruction lockdown 12" "Low,High" textline " " bitfld.long (0x30+0x04) 11. " INSTRLOCK110[11] ,Cache instruction lockdown 11" "Low,High" bitfld.long (0x30+0x04) 10. " INSTRLOCK110[10] ,Cache instruction lockdown 10" "Low,High" bitfld.long (0x30+0x04) 9. " INSTRLOCK110[9] ,Cache instruction lockdown 9" "Low,High" bitfld.long (0x30+0x04) 8. " INSTRLOCK110[8] ,Cache instruction lockdown 8" "Low,High" textline " " bitfld.long (0x30+0x04) 7. " INSTRLOCK110[7] ,Cache instruction lockdown 7" "Low,High" bitfld.long (0x30+0x04) 6. " INSTRLOCK110[6] ,Cache instruction lockdown 6" "Low,High" bitfld.long (0x30+0x04) 5. " INSTRLOCK110[5] ,Cache instruction lockdown 5" "Low,High" bitfld.long (0x30+0x04) 4. " INSTRLOCK110[4] ,Cache instruction lockdown 4" "Low,High" textline " " bitfld.long (0x30+0x04) 3. " INSTRLOCK110[3] ,Cache instruction lockdown 3" "Low,High" bitfld.long (0x30+0x04) 2. " INSTRLOCK110[2] ,Cache instruction lockdown 2" "Low,High" bitfld.long (0x30+0x04) 1. " INSTRLOCK110[1] ,Cache instruction lockdown 1" "Low,High" bitfld.long (0x30+0x04) 0. " INSTRLOCK110[0] ,Cache instruction lockdown 0" "Low,High" line.long 0x38 "REG9_D_LOCKDOWN7,Data lock down 7" bitfld.long 0x38 15. " DATALOCK111[15] ,Cache data lockdown 15" "Allocation,No allocation" bitfld.long 0x38 14. " DATALOCK111[14] ,Cache data lockdown 14" "Allocation,No allocation" bitfld.long 0x38 13. " DATALOCK111[13] ,Cache data lockdown 13" "Allocation,No allocation" bitfld.long 0x38 12. " DATALOCK111[12] ,Cache data lockdown 12" "Allocation,No allocation" textline " " bitfld.long 0x38 11. " DATALOCK111[11] ,Cache data lockdown 11" "Allocation,No allocation" bitfld.long 0x38 10. " DATALOCK111[10] ,Cache data lockdown 10" "Allocation,No allocation" bitfld.long 0x38 9. " DATALOCK111[9] ,Cache data lockdown 9" "Allocation,No allocation" bitfld.long 0x38 8. " DATALOCK111[8] ,Cache data lockdown 8" "Allocation,No allocation" textline " " bitfld.long 0x38 7. " DATALOCK111[7] ,Cache data lockdown 7" "Allocation,No allocation" bitfld.long 0x38 6. " DATALOCK111[6] ,Cache data lockdown 6" "Allocation,No allocation" bitfld.long 0x38 5. " DATALOCK111[5] ,Cache data lockdown 5" "Allocation,No allocation" bitfld.long 0x38 4. " DATALOCK111[4] ,Cache data lockdown 4" "Allocation,No allocation" textline " " bitfld.long 0x38 3. " DATALOCK111[3] ,Cache data lockdown 3" "Allocation,No allocation" bitfld.long 0x38 2. " DATALOCK111[2] ,Cache data lockdown 2" "Allocation,No allocation" bitfld.long 0x38 1. " DATALOCK111[1] ,Cache data lockdown 1" "Allocation,No allocation" bitfld.long 0x38 0. " DATALOCK111[0] ,Cache data lockdown 0" "Allocation,No allocation" line.long (0x38+0x04) "REG9_I_LOCKDOWN7,Instruction lock down 7" bitfld.long (0x38+0x04) 15. " INSTRLOCK111[15] ,Cache instruction lockdown 15" "Low,High" bitfld.long (0x38+0x04) 14. " INSTRLOCK111[14] ,Cache instruction lockdown 14" "Low,High" bitfld.long (0x38+0x04) 13. " INSTRLOCK111[13] ,Cache instruction lockdown 13" "Low,High" bitfld.long (0x38+0x04) 12. " INSTRLOCK111[12] ,Cache instruction lockdown 12" "Low,High" textline " " bitfld.long (0x38+0x04) 11. " INSTRLOCK111[11] ,Cache instruction lockdown 11" "Low,High" bitfld.long (0x38+0x04) 10. " INSTRLOCK111[10] ,Cache instruction lockdown 10" "Low,High" bitfld.long (0x38+0x04) 9. " INSTRLOCK111[9] ,Cache instruction lockdown 9" "Low,High" bitfld.long (0x38+0x04) 8. " INSTRLOCK111[8] ,Cache instruction lockdown 8" "Low,High" textline " " bitfld.long (0x38+0x04) 7. " INSTRLOCK111[7] ,Cache instruction lockdown 7" "Low,High" bitfld.long (0x38+0x04) 6. " INSTRLOCK111[6] ,Cache instruction lockdown 6" "Low,High" bitfld.long (0x38+0x04) 5. " INSTRLOCK111[5] ,Cache instruction lockdown 5" "Low,High" bitfld.long (0x38+0x04) 4. " INSTRLOCK111[4] ,Cache instruction lockdown 4" "Low,High" textline " " bitfld.long (0x38+0x04) 3. " INSTRLOCK111[3] ,Cache instruction lockdown 3" "Low,High" bitfld.long (0x38+0x04) 2. " INSTRLOCK111[2] ,Cache instruction lockdown 2" "Low,High" bitfld.long (0x38+0x04) 1. " INSTRLOCK111[1] ,Cache instruction lockdown 1" "Low,High" bitfld.long (0x38+0x04) 0. " INSTRLOCK111[0] ,Cache instruction lockdown 0" "Low,High" group.long 0x950++0x07 line.long 0x00 "REG9_LOCK_LINE_EN,Lockdown by Line Enable Register" bitfld.long 0x00 0. " LOCK_DOWN_BY_LINE_ENABLE ,Lockdown by line enable" "Disabled,Enabled" line.long 0x04 "REG9_UNLOCK_WAY,Cache lockdown by way" bitfld.long 0x04 15. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[15] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 14. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[14] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 13. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[13] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 12. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[12] ,Unlock all lines by way operation" "Disabled,Enabled" textline " " bitfld.long 0x04 11. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[11] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 10. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[10] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 9. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[9] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 8. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[8] ,Unlock all lines by way operation" "Disabled,Enabled" textline " " bitfld.long 0x04 7. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[7] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 6. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[6] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 5. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[5] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 4. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[4] ,Unlock all lines by way operation" "Disabled,Enabled" textline " " bitfld.long 0x04 3. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[3] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 2. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[2] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 1. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[1] ,Unlock all lines by way operation" "Disabled,Enabled" bitfld.long 0x04 0. " UNLOCK_ALL_LINES_BY_WAY_OPERATION[0] ,Unlock all lines by way operation" "Disabled,Enabled" group.long 0xC00++0x07 line.long 0x00 "REG12_ADDR_FILTERING_START,Address filtering start address register" hexmask.long.word 0x00 20.--31. 0x10 " ADDR_FILTERING_START ,Address filtering start address" bitfld.long 0x00 0. " ADDR_FILTERING_ENABLE ,Address filtering enable" "Disabled,Enabled" line.long 0x04 "REG12_ADDR_FILTERING_START,Address filtering start address register" hexmask.long.word 0x04 20.--31. 0x10 " ADDR_FILTERING_END ,Address filtering end address" group.long 0xF40++0x03 line.long 0x00 "REG15_DEBUG_CTRL,The Debug Control Register" bitfld.long 0x00 2. " SPNIDEN ,Reads value of SPNIDEN input" "Low,High" bitfld.long 0x00 1. " DWB ,Disable write-back" "No,Yes" bitfld.long 0x00 0. " DCL ,Disable cache linefill" "No,Yes" group.long 0xF60++0x03 line.long 0x00 "REG15_PREFETCH_CTRL,Purpose Enables prefetch-related features that can improve system performance" bitfld.long 0x00 30. " DOUBLE_LINEFILL_EN ,Double linefill enable" "Disabled,Enabled" bitfld.long 0x00 29. " INST_PREF_EN ,Instruction prefetch enable" "Disabled,Enabled" bitfld.long 0x00 28. " DATA_PREF_EN ,Data prefetch enable" "Disabled,Enabled" bitfld.long 0x00 27. " DOUBLE_LINEFILL_ON_WRAPREAD_EN ,Double linefill on WRAP read disable" "No,Yes" textline " " bitfld.long 0x00 24. " PREF_DROP_EN ,Prefetch drop enable" "Disabled,Enabled" bitfld.long 0x00 23. " INCR_DOUBLE_LINEFILL_EN ,Incr double Linefill enable" "Disabled,Enabled" bitfld.long 0x00 21. " NOT_SAME_ID_ON_EXCL_SEQ_EN ,Not same ID on exclusive sequence enable" "Disabled,Enabled" bitfld.long 0x00 0.--4. " PREFETCH_OFFSET ,Prefetch offset" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0xF80++0x03 line.long 0x00 "REG15_POWER_CTRL,Purpose Controls the operating mode clock and power modes" bitfld.long 0x00 1. " DYNAMIC_CLK_GATING_EN ,Dynamic clock gating enable" "Disabled,Enabled" bitfld.long 0x00 0. " STANDBY_MODE_EN ,Standby mode enable" "Disabled,Enabled" width 11. tree.end textline ""