; --------------------------------------------------------------------------------
; @Title: Microsemi SmartFusion2 Starter Kit Start script
; @Description: 
;   Load a simple sieve demo into the SRAM of the Microsemi SmartFusion2.
;   Prerequisites:
;     * JP2 JTAG SEL - Short Pin 1-2 (please see readme.txt)
;     * FPGA Design loaded which clocks the Cortex-M
;     * debugger is connected to P3 connector
; @Author: AME
; @Board: SmartFusion2
; @Chip: M2S*
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: start-sieve.cmm 22664 2024-04-18 09:47:55Z gmehdi $

; Reviewed by GME, 2024-04-18


  RESet
  SYStem.RESet
  SYStem.CPU M2S010
  SYStem.CONFIG CONNECTOR      MIPI20T
  SYStem.CONFIG DEBUGPORTTYPE  SWD
  SYStem.Option ResBreak       OFF
  SYStem.Option WaitReset      1ms
  SYStem.Option DUALPORT       ON
  SYStem.MemAccess DAP
  SYStem.Up

; load stack pointer and PC from vector table	
  Register.RESet

; Init internal SRAM
  Data.Set 0x20000000++0x13FFF % Long 0

; load debug information of demo application on the board
  DO ~~/demo/arm/compiler/gnu-pic/demo_sieve 0x20008000
  Go main
  WAIT !STATE.RUN()

  Mode.Hll
  WinPOS 0% 0%
  List.auto
  
  ENDDO