; --------------------------------------------------------------------------------
; @Title: Start-Up script for MB86R1x Emerald with Trace.
; @Description: 
;   This script sets up the debug & trace of
;   an MB86R1x. Starts an low-level code afterwards.
;   Set SW10.Pin4 to 1 JTAG DFT mode
;   Set SW10.Pin7 to 0 MPXMODE2=0
;   Set SW7.Pin6 to 1
; @Keywords: Emerald
; @Author: AME
; @Board: SK-86R12-01
; @Chip: MB86R11, MB86R12
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: start-trace.cmm 18877 2022-02-02 07:04:07Z bschroefel $


RESet
SYStem.RESet
SYStem.CPU MB86R12
SYStem.Up

; setup offchip trace
IF ANALYZER()
(
	; set PINMUX1(=0x3D100200), PMUX_B=3
	Data.Set A:0x3D100200 %Long Data.Long(A:0x3D100200)&(~0x80000000)
	Data.Set A:0x3D100200 %Long Data.Long(A:0x3D100200)&(~0x38)
	Data.Set A:0x3D100200 %Long Data.Long(A:0x3D100200)|(0x18)
	Data.Set A:0x3D100200 %Long Data.Long(A:0x3D100200)|(0x80000000)
	ETM.PortSize 16
	ETM.PortMode Continuous
	ETM.ON
	Analyzer.AutoFocus
)

; load some code into SRAM
Data.LOAD.Elf ~~/demo/arm/compiler/gnu-pic/midi_arm.elf 0xd0200100 /RelPATH

; stop at 'main'
Go main
WAIT !STATE.RUN()

; open some windows
List.auto