; --------------------------------------------------------------------------------
; @Title: TMPR461XBG Serial FLASH Programming Script
; @Description:
; Serial FLASH (MICRON, N25Q128) connected the SPI0 
; (Serial Peripheral Interface)
; Serial FLASH (SPANSION,S25FL32)
;
; Internal SRAM    : 0x800000
; Serial FLASH Controller Addr: 0xC0109000  
;
; @Author: jjeong
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Keywords: MICRON N25Q128 SPANSION S25FL32 SPI 
; --------------------------------------------------------------------------------
; $Id: tmpr46x-spi64.cmm 10516 2022-02-02 11:39:30Z bschroefel $

LOCAL &arg1
ENTRY &arg1
&arg1=STRing.UPpeR("&arg1")  // for example "PREPAREONLY"


; Basic setup
  SYStem.RESet
  SYStem.CPU CortexR4
  SYStem.Option ResBreak OFF

; Configure CoreSight
  SYStem.CONFIG.COREDEBUG.Base   0x80007000
  SYStem.CONFIG.CTI.Base         0x80009000
  SYStem.CONFIG.ETM.Base         0x80008000
  SYStem.CONFIG.ITM.Base         0x80005000
  SYStem.CONFIG.FUNNEL.Base      0x80004000
  SYStem.CONFIG.FUNNEL.ATBSource ETM 0 ITM.state 1     ; Guessed
  SYStem.CONFIG.TPIU.Base        0x80003000
  SYStem.CONFIG.TPIU.ATBSource   FUNNEL
  SYStem.CONFIG.ETB.Base         0x80001000
  SYStem.CONFIG.ETB.ATBSource    FUNNEL
  
  SYStem.Up

  Break.RESet

  FLASHFILE.RESet

//FLASFILE.CONFIG  <Base address>
  FLASHFILE.CONFIG  0xC0109000

// FLASHFILE.TARGET <code range> <data range> <Algorithm file>
  FLASHFILE.TARGET 0x800000++0x3fff 0x804000++0x4FFF ~~/demo/arm/flash/byte/spi64_tmpr46x.bin  /KEEP

//Read FLASH Manufacture and Device ID
  FLASHFILE.GETID

//End of the test prepareonly
IF "&arg1"=="PREPAREONLY"
ENDDO


//Dump window for Serial FLASH
 ;FLASHFILE.DUMP 0x0               ; Read  
 ;FLASHFILE.UNLOCK 0x0--0xFFFFF    ; Unlock
 ;FLASHFILE.ERASE 0x0--0xFFFFF     ; Erase 
 ;FLASHFILE.LOAD * 0x0             ; Write 

ENDDO