; --------------------------------------------------------------------------------
; @Title: Example script for flash declaration of Infineon TLE98X internal flash.
;
; @Description:
; Synopsis:
;
;   DO tle988x [PREPAREONLY] [CPU=<cpu>]
;
; Description:
;
;   Script arguments are not case sensitive.
;
;   PREPAREONLY only declares flash but does not execute flash programming
;
;   CPU=<cpu> selects CPU derivative <cpu>. <cpu> can be CPU name out of the
;             table listed below. For these derivatives the flash declaration
;             is done by the script.
;
; Example:
;
;   DO ~~/demo/arm/flash/tle988x CPU=TLE98932QTW62S PREPAREONLY
;
; List of TLE98X derivatives and their configuration:
;
;   CPU-Type              Flash0     Flash1     PSRAM
; --------------------------------------------------------------------------------
;   TLE9881*               24KB       120KB      8KB
;   TLE9883*               24KB       248KB      8KB
;   TLE9891*               24KB       120KB      8KB
;   TLE9893*               24KB       248KB      8KB
;
; @Author: STK
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Rev: 12698 $
; $Id: tle988x.cmm 12698 2023-11-08 08:13:33Z skrausse $
;

LOCAL &parameters
ENTRY %LINE &parameters

LOCAL &param_prepareonly
&param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)

LOCAL &param_cpu
&param_cpu=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"CPU=","")
; ------------------------------------------------------------------------------
; Start debugging

IF SYStem.MODE()<5
(
  SYStem.RESet

  IF "&param_cpu"!=""
    SYStem.CPU &param_cpu
  IF !CPUIS(TLE98*)
    SYStem.CPU TLE98932QTW62S

  SYStem.Mode.Attach
  Break

  Register.Set XPSR 0x01000000

)

; ------------------------------------------------------------------------------
; Flash declaration

FLASH.RESet
GOSUB FlashDeclaration

; Flash script ends here if called with parameter PREPAREONLY
IF &param_prepareonly
  ENDDO PREPAREDONE

; ------------------------------------------------------------------------------
; Flash programming example

DIALOG.YESNO "Program flash memory?"
LOCAL &progflash
ENTRY &progflash
IF &progflash
(
  FLASH.ReProgram.ALL /Erase
  Data.LOAD.auto *
  FLASH.ReProgram.off

  ; Reset device
  SYStem.Down
  SYStem.Up
)

ENDDO


--------------------------------------------------------------------------------
Flash declaration depending on selected CPU

FlashDeclaration:

LOCAL &Flash0Size &Flash1Size &EepromSize &FlashDriver &PageSize
&Flash0Size=0x0
&Flash1Size=0x0
&EepromSize=0x2000
&SectorSize=0x1000
&FlashDriver="tle988aa.bin"

IF CPUIS(TLE9881*)
(
  &Flash0Size=0x8000
  &Flash1Size=0x1E000
)
ELSE IF CPUIS(TLE9891*)
(
  &Flash0Size=0x8000
  &Flash1Size=0x1E000
)
ELSE IF CPUIS(TLE9883*)
(
  &Flash0Size=0x8000
  &Flash1Size=0x3E000
)
ELSE IF CPUIS(TLE9893*)
(
  &Flash0Size=0x8000
  &Flash1Size=0x3E000
)
ELSE
(
  PRINT %ERROR "FLASH size of CPU type is not supported by the script"
  ENDDO
)

FLASH.Create 1. 0x11000000++(&Flash0Size-1) &SectorSize TARGET Long
FLASH.CHANGEtype (0x11000000+&Flash0Size-0x2000)++(0x2000-1) NOP /INFO "EEPROM"
FLASH.Create 2. 0x12002000++(&Flash1Size-1) &SectorSize TARGET Long

 IF (("&param_dualport"!="1")||SYStem.ACCESS.DENIED())
  FLASH.TARGET 0x18001000 0x18002000 0x1000 ~~/demo/arm/flash/long/&FlashDriver
ELSE
  FLASH.TARGET 0x18001000 0x18002000 0x1000 ~~/demo/arm/flash/long/&FlashDriver /DualPort

RETURN