; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of Samsung HART-M310 internal flash 
;
; @Description: 
; Script arguments:
;
;   DO hartm310 [PREPAREONLY]
;
;     PREPAREONLY only declares flash but does not execute flash programming
;
; Example:
;
;   DO ~~/demo/arm/flash/hartm310 PREPAREONLY
;
; Memory ranges:
;
;   256 kByte code flash area at 0x00000000--0x0003ffff
;   512 Byte  code flash INFO at 0x00100000--0x001001ff
;    32 kByte data flash area at 0x0f000000--0x0f007fff
;   256 Byte  data flash INFO at 0x0f100000--0x001000ff
;    24 kByte internal RAM at    0x20000000--0x20005fff
;
; @Author: WRD
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: 
; --------------------------------------------------------------------------------
; $Rev: 10516 $
; $Id: hartm310.cmm 10516 2022-02-02 11:39:30Z bschroefel $

  LOCAL &parameters
  ENTRY %LINE &parameters

  LOCAL &param_prepareonly
  &param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)
  
  ; --------------------------------------------------------------------------------
  ; CPU setup

  IF SYStem.MODE()<5
  (
    SYStem.RESet

    ON ERROR GOSUB ErrorSystemCPU
    SYStem.CPU HART-M310
    ON ERROR
    SYStem.Option.ResBreak OFF
    SYStem.Option.WaitReset 100.ms

    SYStem.Up
  )

  ; Setup flash wait states to 3 wait cycle for code and data flash
  ;Data.Set 0x40000100 %Word 0x0202

  ; --------------------------------------------------------------------------------
  ; Flash declaration

  FLASH.RESet

  ; Program flash
  FLASH.Create 1. 0x00000000--0x0003ffff 0x1000 TARGET Long
  ; Data flash
  FLASH.Create 2. 0x0f000000--0x0f007fff 0x1000 TARGET Byte

  FLASH.TARGET 0x20001000 0x20002000 0x1000 ~~/demo/arm/flash/byte/hartm310.bin

  ; Flash script ends here if called with parameter PREPAREONLY
  IF &param_prepareonly
    ENDDO PREPAREDONE
  
  ; --------------------------------------------------------------------------------
  ; Flash programming example

  DIALOG.YESNO "Program flash memory?"
  LOCAL &progflash
  ENTRY &progflash
  IF &progflash 
  (
    FLASH.ReProgram.ALL /Erase
    Data.LOAD.auto *
    FLASH.ReProgram.off

    ; Reset device
    SYStem.Down
    SYStem.Up
  )

  ENDDO


; --------------------------------------------------------------------------------
; CPU selection for the case selection HART-M310 is not supported by 
; Trace32 software version.

ErrorSystemCPU:
  SYStem.CPU CortexM3
  RETURN