diff --git a/2_Trunk/scripts/V4H/Mobis/Lauterbach/RCAR_V4H_CR52_SRAM.bak b/2_Trunk/scripts/V4H/Mobis/Lauterbach/RCAR_V4H_CR52_SRAM.bak
deleted file mode 100644
index da99a09..0000000
--- a/2_Trunk/scripts/V4H/Mobis/Lauterbach/RCAR_V4H_CR52_SRAM.bak
+++ /dev/null
@@ -1,165 +0,0 @@
-; --------------------------------------------------------------------------------
-; @Title: Simple demo script for R8A779G-CR52 on WhiteHawk (RAM)
-; @Description:
-;   Loads the sieve demo application into RAM and sets up a demo debug
-;   scenario.
-;   Use this script for getting started.
-;   Prerequisites:
-;    * Connect Debug Cable/Combiprobe to CN1 (Main JTAG)
-;    * Set boot core to Cortex-R52 and main JTAG to CoreSight. This can either be
-;      done via a switch board or by programming the CPLD.
-;
-;   Switch MD (Switch SW1 Pin[1:8]) settings. Mode switch board is connected to CN9 on the WhiteHawk-CPU board:
-;    * Cortex-R52 boot
-;        MD6 = 1 (SW1[1] = OFF)
-;        MD7 = 1 (SW1[2] = OFF)
-;    * SCIF download mode (not boot code is executed)
-;                (SW1[3] = OFF)
-;        MD8 = 1 (SW1[4] = OFF)
-;        MD4 = 1 (SW1[5] = OFF)
-;        MD3 = 1 (SW1[6] = OFF)
-;        MD2 = 1 (SW1[7] = OFF)
-;        MD1 = 1 (SW1[8] = OFF)
-;    * Normal boot:
-;        MD5  = 0 (SW2[1] = OFF)
-;        MD35 = 0 (SW2[2] = ON)
-;    * Main JTAG = CoreSight, Sub JTAG = Normal Function
-;        MDT0 = 0 (SW2[3] = ON)
-;        MD21 = 1 (SW2[4] = OFF)
-;        MD20 = 0 (SW2[5] = ON)
-;        MD11 = 0 (SW2[6] = ON)
-;        MD10 = 0 (SW2[7] = ON)
-;                 (SW2[8] = OFF)
-;
-; @Keywords: ARM, Cortex-R52
-; @Props: Confidential
-; @Author: BES
-; @Board: WhiteHawk
-; @Chip: R8A779G
-; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
-; --------------------------------------------------------------------------------
-; $Id: r_carv4h-cr52_sieve_sram.cmm 19524 2022-06-20 07:59:40Z bschroefel $
-
-;WinCLEAR
-
-; --------------------------------------------------------------------------------
-; Check prerequisites
-IF VERSION.BUILD.BASE()<145267.
-(
-  PRINT %ERROR "Please use more recent Software! Contact support@lauterbach.com."
-  ENDDO
-)
-
-; --------------------------------------------------------------------------------
-; Initialize and start the debugger
-;RESet
-;SYStem.RESet
-
-SYStem.CPU R8A779G-CR52
-SYStem.MemAccess DAP
-SYStem.JtagClock 10MHz
-SYStem.Option.DUALPORT ON
-SYStem.Mode.NoDebug
-SYStem.Mode.Attach
-
-;CORE.ASSIGN 1.
-Trace.DISable
-ETM.OFF
-;SYStem.Up
-
-;CORE 0.
-
-Break
-
-;GOSUB EnableATCM "0xE4000000"
-
-; --------------------------------------------------------------------------------
-; DRCR.RBE=0 (RPC Read cache = OFF) for flash region access
-;Data.Set AD:0xEE20000C %LE %Long 0yXXXXxxxxXXXXxxxxXXXXxxx0XXXXxxxx
-
-;Data.Set HD:0xE6170334 %LE %Long 0xE6300000
-;Data.Set HD:0xE617033C %LE %Long 0xE6300000
-;Data.Set HD:0xE617033C %LE %Long 0xE6300000
-;Data.Set HD:0xE617033C %LE %Long 0xE6300011
-
-;slee - Core1
-;Data.Set HD:0xE6170374 %LE %Long 0xE6300000
-;Data.Set HD:0xE617037C %LE %Long 0xE6300000
-;Data.Set HD:0xE617037C %LE %Long 0xE6300000
-;Data.Set HD:0xE617037C %LE %Long 0xE6300011
-
-;slee - Core2
-;Data.Set HD:0xE61703B4 %LE %Long 0xE6300000
-;Data.Set HD:0xE61703BC %LE %Long 0xE6300000
-;Data.Set HD:0xE61703BC %LE %Long 0xE6300000
-;Data.Set HD:0xE61703BC %LE %Long 0xE6300011
-
-; --------------------------------------------------------------------------------
-; Load demo program (uses internal RAM only)
-;Data.LOAD.Elf "C:\Renesas\adas_prk_3_r770\BSW_RTE\out\ADASPRK3.elf" /nocode
-;Data.LOAD.Elf "C:\Renesas\adas_prk_3_r770\BSW_RTE\out\ADASPRK3.elf"
-Data.LOAD.Elf "C:\Users\a5134225\Downloads\20251002_debug_files\Binary\TIMEOUT_60ms\ADASPRK3.elf" /nocode
-
-; ============= Core 0
-Core.select 2
-register.set pc intvect_CoreExceptions
-Core.select 0
-
-;register.set pc brsStartupEntryHyp
-
-
-
-
-
-
-
-
-;register.set pc intvect_CoreExceptions
-
-
-
-; --------------------------------------------------------------------------------
-; Start program execution
-;Go.direct main
-;WAIT !STATE.RUN()
-
-; --------------------------------------------------------------------------------
-; Open some windows
-;WinCLEAR
-Mode.Hll
-;WinPOS 0. 0. 116. 26.
-;List.auto
-;WinPOS 120. 0. 100. 8.
-;Frame.view
-;WinPOS 120. 14.
-;Var.Watch
-;Var.AddWatch %SpotLight ast flags
-;WinPOS 120. 25.
-;Register.view /SpotLight
-;break.Set Det_ReportError
-;break.Set Os_UnhandledExc
-;break.Set BswM_PreInit
-
-;break.Set McutClock
-ENDDO
-
-; ================================================================================
-
-; --------------------------------------------------------------------------------
-EnableATCM:
-(
-  PRIVATE &addr
-  PARAMETERS &addr
-
-  ; Enable ACTM
-  Data.Set C15:0x19 %Long (&addr&0xFFFFF000)|0x1B
-  ; Enable MPU at EL2, region 0 only
-  ;Data.Set C15:0x4001 %Long 0yXXXXxxxxXXXXxxxxXXXXxxxxXXXXxxx1
-  ;Data.Set C15:0x4116 %Long 0x1
-  ;Data.Set C15:0x4086 %Long (&addr&0xFFFFF000)
-  ;Data.Set C15:0x4186 %Long (&addr&0xFFFFF000)+0x7FC1
-  
-  ; Init values for ATCM, 64-bit access required by TRM
-  Data.Set (&addr&0xFFFFF000)++0x7FFF %Quad 0x0
-)
-RETURN
\ No newline at end of file